Wed, 11 Jan 2012 17:34:02 -0500
7115199: Add event tracing hooks and Java Flight Recorder infrastructure
Summary: Added a nop tracing infrastructure, JFR makefile changes and other infrastructure used only by JFR.
Reviewed-by: acorn, sspitsyn
Contributed-by: markus.gronlund@oracle.com
duke@435 | 1 | /* |
tonyp@2472 | 2 | * Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved. |
duke@435 | 3 | * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
duke@435 | 4 | * |
duke@435 | 5 | * This code is free software; you can redistribute it and/or modify it |
duke@435 | 6 | * under the terms of the GNU General Public License version 2 only, as |
duke@435 | 7 | * published by the Free Software Foundation. |
duke@435 | 8 | * |
duke@435 | 9 | * This code is distributed in the hope that it will be useful, but WITHOUT |
duke@435 | 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
duke@435 | 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
duke@435 | 12 | * version 2 for more details (a copy is included in the LICENSE file that |
duke@435 | 13 | * accompanied this code). |
duke@435 | 14 | * |
duke@435 | 15 | * You should have received a copy of the GNU General Public License version |
duke@435 | 16 | * 2 along with this work; if not, write to the Free Software Foundation, |
duke@435 | 17 | * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
duke@435 | 18 | * |
trims@1907 | 19 | * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
trims@1907 | 20 | * or visit www.oracle.com if you need additional information or have any |
trims@1907 | 21 | * questions. |
duke@435 | 22 | * |
duke@435 | 23 | */ |
duke@435 | 24 | |
stefank@2314 | 25 | #ifndef SHARE_VM_UTILITIES_GLOBALDEFINITIONS_HPP |
stefank@2314 | 26 | #define SHARE_VM_UTILITIES_GLOBALDEFINITIONS_HPP |
stefank@2314 | 27 | |
dcubed@3202 | 28 | #ifndef __STDC_FORMAT_MACROS |
never@3156 | 29 | #define __STDC_FORMAT_MACROS |
dcubed@3202 | 30 | #endif |
never@3156 | 31 | |
stefank@2314 | 32 | #ifdef TARGET_COMPILER_gcc |
stefank@2314 | 33 | # include "utilities/globalDefinitions_gcc.hpp" |
stefank@2314 | 34 | #endif |
stefank@2314 | 35 | #ifdef TARGET_COMPILER_visCPP |
stefank@2314 | 36 | # include "utilities/globalDefinitions_visCPP.hpp" |
stefank@2314 | 37 | #endif |
stefank@2314 | 38 | #ifdef TARGET_COMPILER_sparcWorks |
stefank@2314 | 39 | # include "utilities/globalDefinitions_sparcWorks.hpp" |
stefank@2314 | 40 | #endif |
stefank@2314 | 41 | |
stefank@2314 | 42 | #include "utilities/macros.hpp" |
stefank@2314 | 43 | |
duke@435 | 44 | // This file holds all globally used constants & types, class (forward) |
duke@435 | 45 | // declarations and a few frequently used utility functions. |
duke@435 | 46 | |
duke@435 | 47 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 48 | // Constants |
duke@435 | 49 | |
duke@435 | 50 | const int LogBytesPerShort = 1; |
duke@435 | 51 | const int LogBytesPerInt = 2; |
duke@435 | 52 | #ifdef _LP64 |
duke@435 | 53 | const int LogBytesPerWord = 3; |
duke@435 | 54 | #else |
duke@435 | 55 | const int LogBytesPerWord = 2; |
duke@435 | 56 | #endif |
duke@435 | 57 | const int LogBytesPerLong = 3; |
duke@435 | 58 | |
duke@435 | 59 | const int BytesPerShort = 1 << LogBytesPerShort; |
duke@435 | 60 | const int BytesPerInt = 1 << LogBytesPerInt; |
duke@435 | 61 | const int BytesPerWord = 1 << LogBytesPerWord; |
duke@435 | 62 | const int BytesPerLong = 1 << LogBytesPerLong; |
duke@435 | 63 | |
duke@435 | 64 | const int LogBitsPerByte = 3; |
duke@435 | 65 | const int LogBitsPerShort = LogBitsPerByte + LogBytesPerShort; |
duke@435 | 66 | const int LogBitsPerInt = LogBitsPerByte + LogBytesPerInt; |
duke@435 | 67 | const int LogBitsPerWord = LogBitsPerByte + LogBytesPerWord; |
duke@435 | 68 | const int LogBitsPerLong = LogBitsPerByte + LogBytesPerLong; |
duke@435 | 69 | |
duke@435 | 70 | const int BitsPerByte = 1 << LogBitsPerByte; |
duke@435 | 71 | const int BitsPerShort = 1 << LogBitsPerShort; |
duke@435 | 72 | const int BitsPerInt = 1 << LogBitsPerInt; |
duke@435 | 73 | const int BitsPerWord = 1 << LogBitsPerWord; |
duke@435 | 74 | const int BitsPerLong = 1 << LogBitsPerLong; |
duke@435 | 75 | |
duke@435 | 76 | const int WordAlignmentMask = (1 << LogBytesPerWord) - 1; |
duke@435 | 77 | const int LongAlignmentMask = (1 << LogBytesPerLong) - 1; |
duke@435 | 78 | |
duke@435 | 79 | const int WordsPerLong = 2; // Number of stack entries for longs |
duke@435 | 80 | |
coleenp@548 | 81 | const int oopSize = sizeof(char*); // Full-width oop |
coleenp@548 | 82 | extern int heapOopSize; // Oop within a java object |
duke@435 | 83 | const int wordSize = sizeof(char*); |
duke@435 | 84 | const int longSize = sizeof(jlong); |
duke@435 | 85 | const int jintSize = sizeof(jint); |
duke@435 | 86 | const int size_tSize = sizeof(size_t); |
duke@435 | 87 | |
coleenp@548 | 88 | const int BytesPerOop = BytesPerWord; // Full-width oop |
duke@435 | 89 | |
coleenp@548 | 90 | extern int LogBytesPerHeapOop; // Oop within a java object |
coleenp@548 | 91 | extern int LogBitsPerHeapOop; |
coleenp@548 | 92 | extern int BytesPerHeapOop; |
coleenp@548 | 93 | extern int BitsPerHeapOop; |
duke@435 | 94 | |
kvn@1926 | 95 | // Oop encoding heap max |
kvn@1926 | 96 | extern uint64_t OopEncodingHeapMax; |
kvn@1926 | 97 | |
duke@435 | 98 | const int BitsPerJavaInteger = 32; |
twisti@994 | 99 | const int BitsPerJavaLong = 64; |
duke@435 | 100 | const int BitsPerSize_t = size_tSize * BitsPerByte; |
duke@435 | 101 | |
coleenp@548 | 102 | // Size of a char[] needed to represent a jint as a string in decimal. |
coleenp@548 | 103 | const int jintAsStringSize = 12; |
coleenp@548 | 104 | |
duke@435 | 105 | // In fact this should be |
duke@435 | 106 | // log2_intptr(sizeof(class JavaThread)) - log2_intptr(64); |
duke@435 | 107 | // see os::set_memory_serialize_page() |
duke@435 | 108 | #ifdef _LP64 |
duke@435 | 109 | const int SerializePageShiftCount = 4; |
duke@435 | 110 | #else |
duke@435 | 111 | const int SerializePageShiftCount = 3; |
duke@435 | 112 | #endif |
duke@435 | 113 | |
duke@435 | 114 | // An opaque struct of heap-word width, so that HeapWord* can be a generic |
duke@435 | 115 | // pointer into the heap. We require that object sizes be measured in |
duke@435 | 116 | // units of heap words, so that that |
duke@435 | 117 | // HeapWord* hw; |
duke@435 | 118 | // hw += oop(hw)->foo(); |
duke@435 | 119 | // works, where foo is a method (like size or scavenge) that returns the |
duke@435 | 120 | // object size. |
duke@435 | 121 | class HeapWord { |
duke@435 | 122 | friend class VMStructs; |
jmasa@698 | 123 | private: |
duke@435 | 124 | char* i; |
jmasa@796 | 125 | #ifndef PRODUCT |
jmasa@698 | 126 | public: |
jmasa@698 | 127 | char* value() { return i; } |
jmasa@698 | 128 | #endif |
duke@435 | 129 | }; |
duke@435 | 130 | |
duke@435 | 131 | // HeapWordSize must be 2^LogHeapWordSize. |
coleenp@548 | 132 | const int HeapWordSize = sizeof(HeapWord); |
duke@435 | 133 | #ifdef _LP64 |
coleenp@548 | 134 | const int LogHeapWordSize = 3; |
duke@435 | 135 | #else |
coleenp@548 | 136 | const int LogHeapWordSize = 2; |
duke@435 | 137 | #endif |
coleenp@548 | 138 | const int HeapWordsPerLong = BytesPerLong / HeapWordSize; |
coleenp@548 | 139 | const int LogHeapWordsPerLong = LogBytesPerLong - LogHeapWordSize; |
duke@435 | 140 | |
duke@435 | 141 | // The larger HeapWordSize for 64bit requires larger heaps |
duke@435 | 142 | // for the same application running in 64bit. See bug 4967770. |
duke@435 | 143 | // The minimum alignment to a heap word size is done. Other |
duke@435 | 144 | // parts of the memory system may required additional alignment |
duke@435 | 145 | // and are responsible for those alignments. |
duke@435 | 146 | #ifdef _LP64 |
duke@435 | 147 | #define ScaleForWordSize(x) align_size_down_((x) * 13 / 10, HeapWordSize) |
duke@435 | 148 | #else |
duke@435 | 149 | #define ScaleForWordSize(x) (x) |
duke@435 | 150 | #endif |
duke@435 | 151 | |
duke@435 | 152 | // The minimum number of native machine words necessary to contain "byte_size" |
duke@435 | 153 | // bytes. |
duke@435 | 154 | inline size_t heap_word_size(size_t byte_size) { |
duke@435 | 155 | return (byte_size + (HeapWordSize-1)) >> LogHeapWordSize; |
duke@435 | 156 | } |
duke@435 | 157 | |
duke@435 | 158 | |
duke@435 | 159 | const size_t K = 1024; |
duke@435 | 160 | const size_t M = K*K; |
duke@435 | 161 | const size_t G = M*K; |
duke@435 | 162 | const size_t HWperKB = K / sizeof(HeapWord); |
duke@435 | 163 | |
iveresov@1696 | 164 | const size_t LOG_K = 10; |
iveresov@1696 | 165 | const size_t LOG_M = 2 * LOG_K; |
iveresov@1696 | 166 | const size_t LOG_G = 2 * LOG_M; |
iveresov@1696 | 167 | |
duke@435 | 168 | const jint min_jint = (jint)1 << (sizeof(jint)*BitsPerByte-1); // 0x80000000 == smallest jint |
duke@435 | 169 | const jint max_jint = (juint)min_jint - 1; // 0x7FFFFFFF == largest jint |
duke@435 | 170 | |
duke@435 | 171 | // Constants for converting from a base unit to milli-base units. For |
duke@435 | 172 | // example from seconds to milliseconds and microseconds |
duke@435 | 173 | |
duke@435 | 174 | const int MILLIUNITS = 1000; // milli units per base unit |
duke@435 | 175 | const int MICROUNITS = 1000000; // micro units per base unit |
duke@435 | 176 | const int NANOUNITS = 1000000000; // nano units per base unit |
duke@435 | 177 | |
johnc@3339 | 178 | const jlong NANOSECS_PER_SEC = CONST64(1000000000); |
johnc@3339 | 179 | const jint NANOSECS_PER_MILLISEC = 1000000; |
johnc@3339 | 180 | |
duke@435 | 181 | inline const char* proper_unit_for_byte_size(size_t s) { |
duke@435 | 182 | if (s >= 10*M) { |
duke@435 | 183 | return "M"; |
duke@435 | 184 | } else if (s >= 10*K) { |
duke@435 | 185 | return "K"; |
duke@435 | 186 | } else { |
duke@435 | 187 | return "B"; |
duke@435 | 188 | } |
duke@435 | 189 | } |
duke@435 | 190 | |
duke@435 | 191 | inline size_t byte_size_in_proper_unit(size_t s) { |
duke@435 | 192 | if (s >= 10*M) { |
duke@435 | 193 | return s/M; |
duke@435 | 194 | } else if (s >= 10*K) { |
duke@435 | 195 | return s/K; |
duke@435 | 196 | } else { |
duke@435 | 197 | return s; |
duke@435 | 198 | } |
duke@435 | 199 | } |
duke@435 | 200 | |
duke@435 | 201 | |
duke@435 | 202 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 203 | // VM type definitions |
duke@435 | 204 | |
duke@435 | 205 | // intx and uintx are the 'extended' int and 'extended' unsigned int types; |
duke@435 | 206 | // they are 32bit wide on a 32-bit platform, and 64bit wide on a 64bit platform. |
duke@435 | 207 | |
duke@435 | 208 | typedef intptr_t intx; |
duke@435 | 209 | typedef uintptr_t uintx; |
duke@435 | 210 | |
duke@435 | 211 | const intx min_intx = (intx)1 << (sizeof(intx)*BitsPerByte-1); |
duke@435 | 212 | const intx max_intx = (uintx)min_intx - 1; |
duke@435 | 213 | const uintx max_uintx = (uintx)-1; |
duke@435 | 214 | |
duke@435 | 215 | // Table of values: |
duke@435 | 216 | // sizeof intx 4 8 |
duke@435 | 217 | // min_intx 0x80000000 0x8000000000000000 |
duke@435 | 218 | // max_intx 0x7FFFFFFF 0x7FFFFFFFFFFFFFFF |
duke@435 | 219 | // max_uintx 0xFFFFFFFF 0xFFFFFFFFFFFFFFFF |
duke@435 | 220 | |
duke@435 | 221 | typedef unsigned int uint; NEEDS_CLEANUP |
duke@435 | 222 | |
duke@435 | 223 | |
duke@435 | 224 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 225 | // Java type definitions |
duke@435 | 226 | |
duke@435 | 227 | // All kinds of 'plain' byte addresses |
duke@435 | 228 | typedef signed char s_char; |
duke@435 | 229 | typedef unsigned char u_char; |
duke@435 | 230 | typedef u_char* address; |
duke@435 | 231 | typedef uintptr_t address_word; // unsigned integer which will hold a pointer |
duke@435 | 232 | // except for some implementations of a C++ |
duke@435 | 233 | // linkage pointer to function. Should never |
duke@435 | 234 | // need one of those to be placed in this |
duke@435 | 235 | // type anyway. |
duke@435 | 236 | |
duke@435 | 237 | // Utility functions to "portably" (?) bit twiddle pointers |
duke@435 | 238 | // Where portable means keep ANSI C++ compilers quiet |
duke@435 | 239 | |
duke@435 | 240 | inline address set_address_bits(address x, int m) { return address(intptr_t(x) | m); } |
duke@435 | 241 | inline address clear_address_bits(address x, int m) { return address(intptr_t(x) & ~m); } |
duke@435 | 242 | |
duke@435 | 243 | // Utility functions to "portably" make cast to/from function pointers. |
duke@435 | 244 | |
duke@435 | 245 | inline address_word mask_address_bits(address x, int m) { return address_word(x) & m; } |
duke@435 | 246 | inline address_word castable_address(address x) { return address_word(x) ; } |
duke@435 | 247 | inline address_word castable_address(void* x) { return address_word(x) ; } |
duke@435 | 248 | |
duke@435 | 249 | // Pointer subtraction. |
duke@435 | 250 | // The idea here is to avoid ptrdiff_t, which is signed and so doesn't have |
duke@435 | 251 | // the range we might need to find differences from one end of the heap |
duke@435 | 252 | // to the other. |
duke@435 | 253 | // A typical use might be: |
duke@435 | 254 | // if (pointer_delta(end(), top()) >= size) { |
duke@435 | 255 | // // enough room for an object of size |
duke@435 | 256 | // ... |
duke@435 | 257 | // and then additions like |
duke@435 | 258 | // ... top() + size ... |
duke@435 | 259 | // are safe because we know that top() is at least size below end(). |
duke@435 | 260 | inline size_t pointer_delta(const void* left, |
duke@435 | 261 | const void* right, |
duke@435 | 262 | size_t element_size) { |
duke@435 | 263 | return (((uintptr_t) left) - ((uintptr_t) right)) / element_size; |
duke@435 | 264 | } |
duke@435 | 265 | // A version specialized for HeapWord*'s. |
duke@435 | 266 | inline size_t pointer_delta(const HeapWord* left, const HeapWord* right) { |
duke@435 | 267 | return pointer_delta(left, right, sizeof(HeapWord)); |
duke@435 | 268 | } |
duke@435 | 269 | |
duke@435 | 270 | // |
duke@435 | 271 | // ANSI C++ does not allow casting from one pointer type to a function pointer |
duke@435 | 272 | // directly without at best a warning. This macro accomplishes it silently |
duke@435 | 273 | // In every case that is present at this point the value be cast is a pointer |
duke@435 | 274 | // to a C linkage function. In somecase the type used for the cast reflects |
duke@435 | 275 | // that linkage and a picky compiler would not complain. In other cases because |
duke@435 | 276 | // there is no convenient place to place a typedef with extern C linkage (i.e |
duke@435 | 277 | // a platform dependent header file) it doesn't. At this point no compiler seems |
duke@435 | 278 | // picky enough to catch these instances (which are few). It is possible that |
duke@435 | 279 | // using templates could fix these for all cases. This use of templates is likely |
duke@435 | 280 | // so far from the middle of the road that it is likely to be problematic in |
duke@435 | 281 | // many C++ compilers. |
duke@435 | 282 | // |
duke@435 | 283 | #define CAST_TO_FN_PTR(func_type, value) ((func_type)(castable_address(value))) |
duke@435 | 284 | #define CAST_FROM_FN_PTR(new_type, func_ptr) ((new_type)((address_word)(func_ptr))) |
duke@435 | 285 | |
duke@435 | 286 | // Unsigned byte types for os and stream.hpp |
duke@435 | 287 | |
duke@435 | 288 | // Unsigned one, two, four and eigth byte quantities used for describing |
duke@435 | 289 | // the .class file format. See JVM book chapter 4. |
duke@435 | 290 | |
duke@435 | 291 | typedef jubyte u1; |
duke@435 | 292 | typedef jushort u2; |
duke@435 | 293 | typedef juint u4; |
duke@435 | 294 | typedef julong u8; |
duke@435 | 295 | |
duke@435 | 296 | const jubyte max_jubyte = (jubyte)-1; // 0xFF largest jubyte |
duke@435 | 297 | const jushort max_jushort = (jushort)-1; // 0xFFFF largest jushort |
duke@435 | 298 | const juint max_juint = (juint)-1; // 0xFFFFFFFF largest juint |
duke@435 | 299 | const julong max_julong = (julong)-1; // 0xFF....FF largest julong |
duke@435 | 300 | |
phh@3427 | 301 | typedef jbyte s1; |
phh@3427 | 302 | typedef jshort s2; |
phh@3427 | 303 | typedef jint s4; |
phh@3427 | 304 | typedef jlong s8; |
phh@3427 | 305 | |
duke@435 | 306 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 307 | // JVM spec restrictions |
duke@435 | 308 | |
duke@435 | 309 | const int max_method_code_size = 64*K - 1; // JVM spec, 2nd ed. section 4.8.1 (p.134) |
duke@435 | 310 | |
duke@435 | 311 | |
duke@435 | 312 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 313 | // HotSwap - for JVMTI aka Class File Replacement and PopFrame |
duke@435 | 314 | // |
duke@435 | 315 | // Determines whether on-the-fly class replacement and frame popping are enabled. |
duke@435 | 316 | |
duke@435 | 317 | #define HOTSWAP |
duke@435 | 318 | |
duke@435 | 319 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 320 | // Object alignment, in units of HeapWords. |
duke@435 | 321 | // |
duke@435 | 322 | // Minimum is max(BytesPerLong, BytesPerDouble, BytesPerOop) / HeapWordSize, so jlong, jdouble and |
duke@435 | 323 | // reference fields can be naturally aligned. |
duke@435 | 324 | |
kvn@1926 | 325 | extern int MinObjAlignment; |
kvn@1926 | 326 | extern int MinObjAlignmentInBytes; |
kvn@1926 | 327 | extern int MinObjAlignmentInBytesMask; |
duke@435 | 328 | |
kvn@1926 | 329 | extern int LogMinObjAlignment; |
kvn@1926 | 330 | extern int LogMinObjAlignmentInBytes; |
coleenp@548 | 331 | |
duke@435 | 332 | // Machine dependent stuff |
duke@435 | 333 | |
stefank@2314 | 334 | #ifdef TARGET_ARCH_x86 |
stefank@2314 | 335 | # include "globalDefinitions_x86.hpp" |
stefank@2314 | 336 | #endif |
stefank@2314 | 337 | #ifdef TARGET_ARCH_sparc |
stefank@2314 | 338 | # include "globalDefinitions_sparc.hpp" |
stefank@2314 | 339 | #endif |
stefank@2314 | 340 | #ifdef TARGET_ARCH_zero |
stefank@2314 | 341 | # include "globalDefinitions_zero.hpp" |
stefank@2314 | 342 | #endif |
bobv@2508 | 343 | #ifdef TARGET_ARCH_arm |
bobv@2508 | 344 | # include "globalDefinitions_arm.hpp" |
bobv@2508 | 345 | #endif |
bobv@2508 | 346 | #ifdef TARGET_ARCH_ppc |
bobv@2508 | 347 | # include "globalDefinitions_ppc.hpp" |
bobv@2508 | 348 | #endif |
stefank@2314 | 349 | |
duke@435 | 350 | |
duke@435 | 351 | // The byte alignment to be used by Arena::Amalloc. See bugid 4169348. |
duke@435 | 352 | // Note: this value must be a power of 2 |
duke@435 | 353 | |
duke@435 | 354 | #define ARENA_AMALLOC_ALIGNMENT (2*BytesPerWord) |
duke@435 | 355 | |
duke@435 | 356 | // Signed variants of alignment helpers. There are two versions of each, a macro |
duke@435 | 357 | // for use in places like enum definitions that require compile-time constant |
duke@435 | 358 | // expressions and a function for all other places so as to get type checking. |
duke@435 | 359 | |
duke@435 | 360 | #define align_size_up_(size, alignment) (((size) + ((alignment) - 1)) & ~((alignment) - 1)) |
duke@435 | 361 | |
duke@435 | 362 | inline intptr_t align_size_up(intptr_t size, intptr_t alignment) { |
duke@435 | 363 | return align_size_up_(size, alignment); |
duke@435 | 364 | } |
duke@435 | 365 | |
duke@435 | 366 | #define align_size_down_(size, alignment) ((size) & ~((alignment) - 1)) |
duke@435 | 367 | |
duke@435 | 368 | inline intptr_t align_size_down(intptr_t size, intptr_t alignment) { |
duke@435 | 369 | return align_size_down_(size, alignment); |
duke@435 | 370 | } |
duke@435 | 371 | |
duke@435 | 372 | // Align objects by rounding up their size, in HeapWord units. |
duke@435 | 373 | |
duke@435 | 374 | #define align_object_size_(size) align_size_up_(size, MinObjAlignment) |
duke@435 | 375 | |
duke@435 | 376 | inline intptr_t align_object_size(intptr_t size) { |
duke@435 | 377 | return align_size_up(size, MinObjAlignment); |
duke@435 | 378 | } |
duke@435 | 379 | |
kvn@1926 | 380 | inline bool is_object_aligned(intptr_t addr) { |
kvn@1926 | 381 | return addr == align_object_size(addr); |
kvn@1926 | 382 | } |
kvn@1926 | 383 | |
duke@435 | 384 | // Pad out certain offsets to jlong alignment, in HeapWord units. |
duke@435 | 385 | |
duke@435 | 386 | inline intptr_t align_object_offset(intptr_t offset) { |
duke@435 | 387 | return align_size_up(offset, HeapWordsPerLong); |
duke@435 | 388 | } |
duke@435 | 389 | |
jcoomes@2020 | 390 | // The expected size in bytes of a cache line, used to pad data structures. |
jcoomes@2020 | 391 | #define DEFAULT_CACHE_LINE_SIZE 64 |
jcoomes@2020 | 392 | |
jcoomes@2020 | 393 | // Bytes needed to pad type to avoid cache-line sharing; alignment should be the |
jcoomes@2020 | 394 | // expected cache line size (a power of two). The first addend avoids sharing |
jcoomes@2020 | 395 | // when the start address is not a multiple of alignment; the second maintains |
jcoomes@2020 | 396 | // alignment of starting addresses that happen to be a multiple. |
jcoomes@2020 | 397 | #define PADDING_SIZE(type, alignment) \ |
jcoomes@2020 | 398 | ((alignment) + align_size_up_(sizeof(type), alignment)) |
jcoomes@2020 | 399 | |
jcoomes@2020 | 400 | // Templates to create a subclass padded to avoid cache line sharing. These are |
jcoomes@2020 | 401 | // effective only when applied to derived-most (leaf) classes. |
jcoomes@2020 | 402 | |
jcoomes@2020 | 403 | // When no args are passed to the base ctor. |
jcoomes@2020 | 404 | template <class T, size_t alignment = DEFAULT_CACHE_LINE_SIZE> |
jcoomes@2020 | 405 | class Padded: public T { |
jcoomes@2020 | 406 | private: |
jcoomes@2020 | 407 | char _pad_buf_[PADDING_SIZE(T, alignment)]; |
jcoomes@2020 | 408 | }; |
jcoomes@2020 | 409 | |
jcoomes@2020 | 410 | // When either 0 or 1 args may be passed to the base ctor. |
jcoomes@2020 | 411 | template <class T, typename Arg1T, size_t alignment = DEFAULT_CACHE_LINE_SIZE> |
jcoomes@2020 | 412 | class Padded01: public T { |
jcoomes@2020 | 413 | public: |
jcoomes@2020 | 414 | Padded01(): T() { } |
jcoomes@2020 | 415 | Padded01(Arg1T arg1): T(arg1) { } |
jcoomes@2020 | 416 | private: |
jcoomes@2020 | 417 | char _pad_buf_[PADDING_SIZE(T, alignment)]; |
jcoomes@2020 | 418 | }; |
duke@435 | 419 | |
duke@435 | 420 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 421 | // Utility macros for compilers |
duke@435 | 422 | // used to silence compiler warnings |
duke@435 | 423 | |
duke@435 | 424 | #define Unused_Variable(var) var |
duke@435 | 425 | |
duke@435 | 426 | |
duke@435 | 427 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 428 | // Miscellaneous |
duke@435 | 429 | |
duke@435 | 430 | // 6302670 Eliminate Hotspot __fabsf dependency |
duke@435 | 431 | // All fabs() callers should call this function instead, which will implicitly |
duke@435 | 432 | // convert the operand to double, avoiding a dependency on __fabsf which |
duke@435 | 433 | // doesn't exist in early versions of Solaris 8. |
duke@435 | 434 | inline double fabsd(double value) { |
duke@435 | 435 | return fabs(value); |
duke@435 | 436 | } |
duke@435 | 437 | |
duke@435 | 438 | inline jint low (jlong value) { return jint(value); } |
duke@435 | 439 | inline jint high(jlong value) { return jint(value >> 32); } |
duke@435 | 440 | |
duke@435 | 441 | // the fancy casts are a hopefully portable way |
duke@435 | 442 | // to do unsigned 32 to 64 bit type conversion |
duke@435 | 443 | inline void set_low (jlong* value, jint low ) { *value &= (jlong)0xffffffff << 32; |
duke@435 | 444 | *value |= (jlong)(julong)(juint)low; } |
duke@435 | 445 | |
duke@435 | 446 | inline void set_high(jlong* value, jint high) { *value &= (jlong)(julong)(juint)0xffffffff; |
duke@435 | 447 | *value |= (jlong)high << 32; } |
duke@435 | 448 | |
duke@435 | 449 | inline jlong jlong_from(jint h, jint l) { |
duke@435 | 450 | jlong result = 0; // initialization to avoid warning |
duke@435 | 451 | set_high(&result, h); |
duke@435 | 452 | set_low(&result, l); |
duke@435 | 453 | return result; |
duke@435 | 454 | } |
duke@435 | 455 | |
duke@435 | 456 | union jlong_accessor { |
duke@435 | 457 | jint words[2]; |
duke@435 | 458 | jlong long_value; |
duke@435 | 459 | }; |
duke@435 | 460 | |
coleenp@548 | 461 | void basic_types_init(); // cannot define here; uses assert |
duke@435 | 462 | |
duke@435 | 463 | |
duke@435 | 464 | // NOTE: replicated in SA in vm/agent/sun/jvm/hotspot/runtime/BasicType.java |
duke@435 | 465 | enum BasicType { |
duke@435 | 466 | T_BOOLEAN = 4, |
duke@435 | 467 | T_CHAR = 5, |
duke@435 | 468 | T_FLOAT = 6, |
duke@435 | 469 | T_DOUBLE = 7, |
duke@435 | 470 | T_BYTE = 8, |
duke@435 | 471 | T_SHORT = 9, |
duke@435 | 472 | T_INT = 10, |
duke@435 | 473 | T_LONG = 11, |
duke@435 | 474 | T_OBJECT = 12, |
duke@435 | 475 | T_ARRAY = 13, |
duke@435 | 476 | T_VOID = 14, |
duke@435 | 477 | T_ADDRESS = 15, |
coleenp@548 | 478 | T_NARROWOOP= 16, |
coleenp@548 | 479 | T_CONFLICT = 17, // for stack value type with conflicting contents |
duke@435 | 480 | T_ILLEGAL = 99 |
duke@435 | 481 | }; |
duke@435 | 482 | |
kvn@464 | 483 | inline bool is_java_primitive(BasicType t) { |
kvn@464 | 484 | return T_BOOLEAN <= t && t <= T_LONG; |
kvn@464 | 485 | } |
kvn@464 | 486 | |
jrose@1145 | 487 | inline bool is_subword_type(BasicType t) { |
jrose@1145 | 488 | // these guys are processed exactly like T_INT in calling sequences: |
jrose@1145 | 489 | return (t == T_BOOLEAN || t == T_CHAR || t == T_BYTE || t == T_SHORT); |
jrose@1145 | 490 | } |
jrose@1145 | 491 | |
jrose@1145 | 492 | inline bool is_signed_subword_type(BasicType t) { |
jrose@1145 | 493 | return (t == T_BYTE || t == T_SHORT); |
jrose@1145 | 494 | } |
jrose@1145 | 495 | |
duke@435 | 496 | // Convert a char from a classfile signature to a BasicType |
duke@435 | 497 | inline BasicType char2type(char c) { |
duke@435 | 498 | switch( c ) { |
duke@435 | 499 | case 'B': return T_BYTE; |
duke@435 | 500 | case 'C': return T_CHAR; |
duke@435 | 501 | case 'D': return T_DOUBLE; |
duke@435 | 502 | case 'F': return T_FLOAT; |
duke@435 | 503 | case 'I': return T_INT; |
duke@435 | 504 | case 'J': return T_LONG; |
duke@435 | 505 | case 'S': return T_SHORT; |
duke@435 | 506 | case 'Z': return T_BOOLEAN; |
duke@435 | 507 | case 'V': return T_VOID; |
duke@435 | 508 | case 'L': return T_OBJECT; |
duke@435 | 509 | case '[': return T_ARRAY; |
duke@435 | 510 | } |
duke@435 | 511 | return T_ILLEGAL; |
duke@435 | 512 | } |
duke@435 | 513 | |
duke@435 | 514 | extern char type2char_tab[T_CONFLICT+1]; // Map a BasicType to a jchar |
duke@435 | 515 | inline char type2char(BasicType t) { return (uint)t < T_CONFLICT+1 ? type2char_tab[t] : 0; } |
duke@435 | 516 | extern int type2size[T_CONFLICT+1]; // Map BasicType to result stack elements |
duke@435 | 517 | extern const char* type2name_tab[T_CONFLICT+1]; // Map a BasicType to a jchar |
duke@435 | 518 | inline const char* type2name(BasicType t) { return (uint)t < T_CONFLICT+1 ? type2name_tab[t] : NULL; } |
duke@435 | 519 | extern BasicType name2type(const char* name); |
duke@435 | 520 | |
duke@435 | 521 | // Auxilary math routines |
duke@435 | 522 | // least common multiple |
duke@435 | 523 | extern size_t lcm(size_t a, size_t b); |
duke@435 | 524 | |
duke@435 | 525 | |
duke@435 | 526 | // NOTE: replicated in SA in vm/agent/sun/jvm/hotspot/runtime/BasicType.java |
duke@435 | 527 | enum BasicTypeSize { |
duke@435 | 528 | T_BOOLEAN_size = 1, |
duke@435 | 529 | T_CHAR_size = 1, |
duke@435 | 530 | T_FLOAT_size = 1, |
duke@435 | 531 | T_DOUBLE_size = 2, |
duke@435 | 532 | T_BYTE_size = 1, |
duke@435 | 533 | T_SHORT_size = 1, |
duke@435 | 534 | T_INT_size = 1, |
duke@435 | 535 | T_LONG_size = 2, |
duke@435 | 536 | T_OBJECT_size = 1, |
duke@435 | 537 | T_ARRAY_size = 1, |
coleenp@548 | 538 | T_NARROWOOP_size = 1, |
duke@435 | 539 | T_VOID_size = 0 |
duke@435 | 540 | }; |
duke@435 | 541 | |
duke@435 | 542 | |
duke@435 | 543 | // maps a BasicType to its instance field storage type: |
duke@435 | 544 | // all sub-word integral types are widened to T_INT |
duke@435 | 545 | extern BasicType type2field[T_CONFLICT+1]; |
duke@435 | 546 | extern BasicType type2wfield[T_CONFLICT+1]; |
duke@435 | 547 | |
duke@435 | 548 | |
duke@435 | 549 | // size in bytes |
duke@435 | 550 | enum ArrayElementSize { |
duke@435 | 551 | T_BOOLEAN_aelem_bytes = 1, |
duke@435 | 552 | T_CHAR_aelem_bytes = 2, |
duke@435 | 553 | T_FLOAT_aelem_bytes = 4, |
duke@435 | 554 | T_DOUBLE_aelem_bytes = 8, |
duke@435 | 555 | T_BYTE_aelem_bytes = 1, |
duke@435 | 556 | T_SHORT_aelem_bytes = 2, |
duke@435 | 557 | T_INT_aelem_bytes = 4, |
duke@435 | 558 | T_LONG_aelem_bytes = 8, |
duke@435 | 559 | #ifdef _LP64 |
duke@435 | 560 | T_OBJECT_aelem_bytes = 8, |
duke@435 | 561 | T_ARRAY_aelem_bytes = 8, |
duke@435 | 562 | #else |
duke@435 | 563 | T_OBJECT_aelem_bytes = 4, |
duke@435 | 564 | T_ARRAY_aelem_bytes = 4, |
duke@435 | 565 | #endif |
coleenp@548 | 566 | T_NARROWOOP_aelem_bytes = 4, |
duke@435 | 567 | T_VOID_aelem_bytes = 0 |
duke@435 | 568 | }; |
duke@435 | 569 | |
kvn@464 | 570 | extern int _type2aelembytes[T_CONFLICT+1]; // maps a BasicType to nof bytes used by its array element |
kvn@464 | 571 | #ifdef ASSERT |
kvn@464 | 572 | extern int type2aelembytes(BasicType t, bool allow_address = false); // asserts |
kvn@464 | 573 | #else |
never@2118 | 574 | inline int type2aelembytes(BasicType t, bool allow_address = false) { return _type2aelembytes[t]; } |
kvn@464 | 575 | #endif |
duke@435 | 576 | |
duke@435 | 577 | |
duke@435 | 578 | // JavaValue serves as a container for arbitrary Java values. |
duke@435 | 579 | |
duke@435 | 580 | class JavaValue { |
duke@435 | 581 | |
duke@435 | 582 | public: |
duke@435 | 583 | typedef union JavaCallValue { |
duke@435 | 584 | jfloat f; |
duke@435 | 585 | jdouble d; |
duke@435 | 586 | jint i; |
duke@435 | 587 | jlong l; |
duke@435 | 588 | jobject h; |
duke@435 | 589 | } JavaCallValue; |
duke@435 | 590 | |
duke@435 | 591 | private: |
duke@435 | 592 | BasicType _type; |
duke@435 | 593 | JavaCallValue _value; |
duke@435 | 594 | |
duke@435 | 595 | public: |
duke@435 | 596 | JavaValue(BasicType t = T_ILLEGAL) { _type = t; } |
duke@435 | 597 | |
duke@435 | 598 | JavaValue(jfloat value) { |
duke@435 | 599 | _type = T_FLOAT; |
duke@435 | 600 | _value.f = value; |
duke@435 | 601 | } |
duke@435 | 602 | |
duke@435 | 603 | JavaValue(jdouble value) { |
duke@435 | 604 | _type = T_DOUBLE; |
duke@435 | 605 | _value.d = value; |
duke@435 | 606 | } |
duke@435 | 607 | |
duke@435 | 608 | jfloat get_jfloat() const { return _value.f; } |
duke@435 | 609 | jdouble get_jdouble() const { return _value.d; } |
duke@435 | 610 | jint get_jint() const { return _value.i; } |
duke@435 | 611 | jlong get_jlong() const { return _value.l; } |
duke@435 | 612 | jobject get_jobject() const { return _value.h; } |
duke@435 | 613 | JavaCallValue* get_value_addr() { return &_value; } |
duke@435 | 614 | BasicType get_type() const { return _type; } |
duke@435 | 615 | |
duke@435 | 616 | void set_jfloat(jfloat f) { _value.f = f;} |
duke@435 | 617 | void set_jdouble(jdouble d) { _value.d = d;} |
duke@435 | 618 | void set_jint(jint i) { _value.i = i;} |
duke@435 | 619 | void set_jlong(jlong l) { _value.l = l;} |
duke@435 | 620 | void set_jobject(jobject h) { _value.h = h;} |
duke@435 | 621 | void set_type(BasicType t) { _type = t; } |
duke@435 | 622 | |
duke@435 | 623 | jboolean get_jboolean() const { return (jboolean) (_value.i);} |
duke@435 | 624 | jbyte get_jbyte() const { return (jbyte) (_value.i);} |
duke@435 | 625 | jchar get_jchar() const { return (jchar) (_value.i);} |
duke@435 | 626 | jshort get_jshort() const { return (jshort) (_value.i);} |
duke@435 | 627 | |
duke@435 | 628 | }; |
duke@435 | 629 | |
duke@435 | 630 | |
duke@435 | 631 | #define STACK_BIAS 0 |
duke@435 | 632 | // V9 Sparc CPU's running in 64 Bit mode use a stack bias of 7ff |
duke@435 | 633 | // in order to extend the reach of the stack pointer. |
duke@435 | 634 | #if defined(SPARC) && defined(_LP64) |
duke@435 | 635 | #undef STACK_BIAS |
duke@435 | 636 | #define STACK_BIAS 0x7ff |
duke@435 | 637 | #endif |
duke@435 | 638 | |
duke@435 | 639 | |
duke@435 | 640 | // TosState describes the top-of-stack state before and after the execution of |
duke@435 | 641 | // a bytecode or method. The top-of-stack value may be cached in one or more CPU |
duke@435 | 642 | // registers. The TosState corresponds to the 'machine represention' of this cached |
duke@435 | 643 | // value. There's 4 states corresponding to the JAVA types int, long, float & double |
duke@435 | 644 | // as well as a 5th state in case the top-of-stack value is actually on the top |
duke@435 | 645 | // of stack (in memory) and thus not cached. The atos state corresponds to the itos |
duke@435 | 646 | // state when it comes to machine representation but is used separately for (oop) |
duke@435 | 647 | // type specific operations (e.g. verification code). |
duke@435 | 648 | |
duke@435 | 649 | enum TosState { // describes the tos cache contents |
duke@435 | 650 | btos = 0, // byte, bool tos cached |
jrose@1161 | 651 | ctos = 1, // char tos cached |
jrose@1161 | 652 | stos = 2, // short tos cached |
duke@435 | 653 | itos = 3, // int tos cached |
duke@435 | 654 | ltos = 4, // long tos cached |
duke@435 | 655 | ftos = 5, // float tos cached |
duke@435 | 656 | dtos = 6, // double tos cached |
duke@435 | 657 | atos = 7, // object cached |
duke@435 | 658 | vtos = 8, // tos not cached |
duke@435 | 659 | number_of_states, |
duke@435 | 660 | ilgl // illegal state: should not occur |
duke@435 | 661 | }; |
duke@435 | 662 | |
duke@435 | 663 | |
duke@435 | 664 | inline TosState as_TosState(BasicType type) { |
duke@435 | 665 | switch (type) { |
duke@435 | 666 | case T_BYTE : return btos; |
jrose@1161 | 667 | case T_BOOLEAN: return btos; // FIXME: Add ztos |
duke@435 | 668 | case T_CHAR : return ctos; |
duke@435 | 669 | case T_SHORT : return stos; |
duke@435 | 670 | case T_INT : return itos; |
duke@435 | 671 | case T_LONG : return ltos; |
duke@435 | 672 | case T_FLOAT : return ftos; |
duke@435 | 673 | case T_DOUBLE : return dtos; |
duke@435 | 674 | case T_VOID : return vtos; |
duke@435 | 675 | case T_ARRAY : // fall through |
duke@435 | 676 | case T_OBJECT : return atos; |
duke@435 | 677 | } |
duke@435 | 678 | return ilgl; |
duke@435 | 679 | } |
duke@435 | 680 | |
jrose@1161 | 681 | inline BasicType as_BasicType(TosState state) { |
jrose@1161 | 682 | switch (state) { |
jrose@1161 | 683 | //case ztos: return T_BOOLEAN;//FIXME |
jrose@1161 | 684 | case btos : return T_BYTE; |
jrose@1161 | 685 | case ctos : return T_CHAR; |
jrose@1161 | 686 | case stos : return T_SHORT; |
jrose@1161 | 687 | case itos : return T_INT; |
jrose@1161 | 688 | case ltos : return T_LONG; |
jrose@1161 | 689 | case ftos : return T_FLOAT; |
jrose@1161 | 690 | case dtos : return T_DOUBLE; |
jrose@1161 | 691 | case atos : return T_OBJECT; |
jrose@1161 | 692 | case vtos : return T_VOID; |
jrose@1161 | 693 | } |
jrose@1161 | 694 | return T_ILLEGAL; |
jrose@1161 | 695 | } |
jrose@1161 | 696 | |
duke@435 | 697 | |
duke@435 | 698 | // Helper function to convert BasicType info into TosState |
duke@435 | 699 | // Note: Cannot define here as it uses global constant at the time being. |
duke@435 | 700 | TosState as_TosState(BasicType type); |
duke@435 | 701 | |
duke@435 | 702 | |
duke@435 | 703 | // ReferenceType is used to distinguish between java/lang/ref/Reference subclasses |
duke@435 | 704 | |
duke@435 | 705 | enum ReferenceType { |
duke@435 | 706 | REF_NONE, // Regular class |
duke@435 | 707 | REF_OTHER, // Subclass of java/lang/ref/Reference, but not subclass of one of the classes below |
duke@435 | 708 | REF_SOFT, // Subclass of java/lang/ref/SoftReference |
duke@435 | 709 | REF_WEAK, // Subclass of java/lang/ref/WeakReference |
duke@435 | 710 | REF_FINAL, // Subclass of java/lang/ref/FinalReference |
duke@435 | 711 | REF_PHANTOM // Subclass of java/lang/ref/PhantomReference |
duke@435 | 712 | }; |
duke@435 | 713 | |
duke@435 | 714 | |
duke@435 | 715 | // JavaThreadState keeps track of which part of the code a thread is executing in. This |
duke@435 | 716 | // information is needed by the safepoint code. |
duke@435 | 717 | // |
duke@435 | 718 | // There are 4 essential states: |
duke@435 | 719 | // |
duke@435 | 720 | // _thread_new : Just started, but not executed init. code yet (most likely still in OS init code) |
duke@435 | 721 | // _thread_in_native : In native code. This is a safepoint region, since all oops will be in jobject handles |
duke@435 | 722 | // _thread_in_vm : Executing in the vm |
duke@435 | 723 | // _thread_in_Java : Executing either interpreted or compiled Java code (or could be in a stub) |
duke@435 | 724 | // |
duke@435 | 725 | // Each state has an associated xxxx_trans state, which is an intermediate state used when a thread is in |
duke@435 | 726 | // a transition from one state to another. These extra states makes it possible for the safepoint code to |
duke@435 | 727 | // handle certain thread_states without having to suspend the thread - making the safepoint code faster. |
duke@435 | 728 | // |
duke@435 | 729 | // Given a state, the xxx_trans state can always be found by adding 1. |
duke@435 | 730 | // |
duke@435 | 731 | enum JavaThreadState { |
duke@435 | 732 | _thread_uninitialized = 0, // should never happen (missing initialization) |
duke@435 | 733 | _thread_new = 2, // just starting up, i.e., in process of being initialized |
duke@435 | 734 | _thread_new_trans = 3, // corresponding transition state (not used, included for completness) |
duke@435 | 735 | _thread_in_native = 4, // running in native code |
duke@435 | 736 | _thread_in_native_trans = 5, // corresponding transition state |
duke@435 | 737 | _thread_in_vm = 6, // running in VM |
duke@435 | 738 | _thread_in_vm_trans = 7, // corresponding transition state |
duke@435 | 739 | _thread_in_Java = 8, // running in Java or in stub code |
duke@435 | 740 | _thread_in_Java_trans = 9, // corresponding transition state (not used, included for completness) |
duke@435 | 741 | _thread_blocked = 10, // blocked in vm |
duke@435 | 742 | _thread_blocked_trans = 11, // corresponding transition state |
duke@435 | 743 | _thread_max_state = 12 // maximum thread state+1 - used for statistics allocation |
duke@435 | 744 | }; |
duke@435 | 745 | |
duke@435 | 746 | |
duke@435 | 747 | // Handy constants for deciding which compiler mode to use. |
duke@435 | 748 | enum MethodCompilation { |
duke@435 | 749 | InvocationEntryBci = -1, // i.e., not a on-stack replacement compilation |
duke@435 | 750 | InvalidOSREntryBci = -2 |
duke@435 | 751 | }; |
duke@435 | 752 | |
duke@435 | 753 | // Enumeration to distinguish tiers of compilation |
duke@435 | 754 | enum CompLevel { |
iveresov@2138 | 755 | CompLevel_any = -1, |
iveresov@2138 | 756 | CompLevel_all = -1, |
iveresov@2138 | 757 | CompLevel_none = 0, // Interpreter |
iveresov@2138 | 758 | CompLevel_simple = 1, // C1 |
iveresov@2138 | 759 | CompLevel_limited_profile = 2, // C1, invocation & backedge counters |
iveresov@2138 | 760 | CompLevel_full_profile = 3, // C1, invocation & backedge counters + mdo |
twisti@2729 | 761 | CompLevel_full_optimization = 4, // C2 or Shark |
duke@435 | 762 | |
twisti@2729 | 763 | #if defined(COMPILER2) || defined(SHARK) |
iveresov@2138 | 764 | CompLevel_highest_tier = CompLevel_full_optimization, // pure C2 and tiered |
iveresov@2138 | 765 | #elif defined(COMPILER1) |
iveresov@2138 | 766 | CompLevel_highest_tier = CompLevel_simple, // pure C1 |
duke@435 | 767 | #else |
iveresov@2138 | 768 | CompLevel_highest_tier = CompLevel_none, |
iveresov@2138 | 769 | #endif |
iveresov@2138 | 770 | |
iveresov@2138 | 771 | #if defined(TIERED) |
iveresov@2138 | 772 | CompLevel_initial_compile = CompLevel_full_profile // tiered |
iveresov@2138 | 773 | #elif defined(COMPILER1) |
iveresov@2138 | 774 | CompLevel_initial_compile = CompLevel_simple // pure C1 |
twisti@2729 | 775 | #elif defined(COMPILER2) || defined(SHARK) |
iveresov@2138 | 776 | CompLevel_initial_compile = CompLevel_full_optimization // pure C2 |
iveresov@2138 | 777 | #else |
iveresov@2138 | 778 | CompLevel_initial_compile = CompLevel_none |
iveresov@2138 | 779 | #endif |
duke@435 | 780 | }; |
duke@435 | 781 | |
iveresov@2138 | 782 | inline bool is_c1_compile(int comp_level) { |
iveresov@2138 | 783 | return comp_level > CompLevel_none && comp_level < CompLevel_full_optimization; |
duke@435 | 784 | } |
iveresov@2138 | 785 | |
iveresov@2138 | 786 | inline bool is_c2_compile(int comp_level) { |
duke@435 | 787 | return comp_level == CompLevel_full_optimization; |
duke@435 | 788 | } |
iveresov@2138 | 789 | |
duke@435 | 790 | inline bool is_highest_tier_compile(int comp_level) { |
duke@435 | 791 | return comp_level == CompLevel_highest_tier; |
duke@435 | 792 | } |
duke@435 | 793 | |
duke@435 | 794 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 795 | // 'Forward' declarations of frequently used classes |
duke@435 | 796 | // (in order to reduce interface dependencies & reduce |
duke@435 | 797 | // number of unnecessary compilations after changes) |
duke@435 | 798 | |
duke@435 | 799 | class symbolTable; |
duke@435 | 800 | class ClassFileStream; |
duke@435 | 801 | |
duke@435 | 802 | class Event; |
duke@435 | 803 | |
duke@435 | 804 | class Thread; |
duke@435 | 805 | class VMThread; |
duke@435 | 806 | class JavaThread; |
duke@435 | 807 | class Threads; |
duke@435 | 808 | |
duke@435 | 809 | class VM_Operation; |
duke@435 | 810 | class VMOperationQueue; |
duke@435 | 811 | |
duke@435 | 812 | class CodeBlob; |
duke@435 | 813 | class nmethod; |
duke@435 | 814 | class OSRAdapter; |
duke@435 | 815 | class I2CAdapter; |
duke@435 | 816 | class C2IAdapter; |
duke@435 | 817 | class CompiledIC; |
duke@435 | 818 | class relocInfo; |
duke@435 | 819 | class ScopeDesc; |
duke@435 | 820 | class PcDesc; |
duke@435 | 821 | |
duke@435 | 822 | class Recompiler; |
duke@435 | 823 | class Recompilee; |
duke@435 | 824 | class RecompilationPolicy; |
duke@435 | 825 | class RFrame; |
duke@435 | 826 | class CompiledRFrame; |
duke@435 | 827 | class InterpretedRFrame; |
duke@435 | 828 | |
duke@435 | 829 | class frame; |
duke@435 | 830 | |
duke@435 | 831 | class vframe; |
duke@435 | 832 | class javaVFrame; |
duke@435 | 833 | class interpretedVFrame; |
duke@435 | 834 | class compiledVFrame; |
duke@435 | 835 | class deoptimizedVFrame; |
duke@435 | 836 | class externalVFrame; |
duke@435 | 837 | class entryVFrame; |
duke@435 | 838 | |
duke@435 | 839 | class RegisterMap; |
duke@435 | 840 | |
duke@435 | 841 | class Mutex; |
duke@435 | 842 | class Monitor; |
duke@435 | 843 | class BasicLock; |
duke@435 | 844 | class BasicObjectLock; |
duke@435 | 845 | |
duke@435 | 846 | class PeriodicTask; |
duke@435 | 847 | |
duke@435 | 848 | class JavaCallWrapper; |
duke@435 | 849 | |
duke@435 | 850 | class oopDesc; |
duke@435 | 851 | |
duke@435 | 852 | class NativeCall; |
duke@435 | 853 | |
duke@435 | 854 | class zone; |
duke@435 | 855 | |
duke@435 | 856 | class StubQueue; |
duke@435 | 857 | |
duke@435 | 858 | class outputStream; |
duke@435 | 859 | |
duke@435 | 860 | class ResourceArea; |
duke@435 | 861 | |
duke@435 | 862 | class DebugInformationRecorder; |
duke@435 | 863 | class ScopeValue; |
duke@435 | 864 | class CompressedStream; |
duke@435 | 865 | class DebugInfoReadStream; |
duke@435 | 866 | class DebugInfoWriteStream; |
duke@435 | 867 | class LocationValue; |
duke@435 | 868 | class ConstantValue; |
duke@435 | 869 | class IllegalValue; |
duke@435 | 870 | |
duke@435 | 871 | class PrivilegedElement; |
duke@435 | 872 | class MonitorArray; |
duke@435 | 873 | |
duke@435 | 874 | class MonitorInfo; |
duke@435 | 875 | |
duke@435 | 876 | class OffsetClosure; |
duke@435 | 877 | class OopMapCache; |
duke@435 | 878 | class InterpreterOopMap; |
duke@435 | 879 | class OopMapCacheEntry; |
duke@435 | 880 | class OSThread; |
duke@435 | 881 | |
duke@435 | 882 | typedef int (*OSThreadStartFunc)(void*); |
duke@435 | 883 | |
duke@435 | 884 | class Space; |
duke@435 | 885 | |
duke@435 | 886 | class JavaValue; |
duke@435 | 887 | class methodHandle; |
duke@435 | 888 | class JavaCallArguments; |
duke@435 | 889 | |
duke@435 | 890 | // Basic support for errors (general debug facilities not defined at this point fo the include phase) |
duke@435 | 891 | |
duke@435 | 892 | extern void basic_fatal(const char* msg); |
duke@435 | 893 | |
duke@435 | 894 | |
duke@435 | 895 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 896 | // Special constants for debugging |
duke@435 | 897 | |
duke@435 | 898 | const jint badInt = -3; // generic "bad int" value |
duke@435 | 899 | const long badAddressVal = -2; // generic "bad address" value |
duke@435 | 900 | const long badOopVal = -1; // generic "bad oop" value |
duke@435 | 901 | const intptr_t badHeapOopVal = (intptr_t) CONST64(0x2BAD4B0BBAADBABE); // value used to zap heap after GC |
duke@435 | 902 | const int badHandleValue = 0xBC; // value used to zap vm handle area |
duke@435 | 903 | const int badResourceValue = 0xAB; // value used to zap resource area |
duke@435 | 904 | const int freeBlockPad = 0xBA; // value used to pad freed blocks. |
duke@435 | 905 | const int uninitBlockPad = 0xF1; // value used to zap newly malloc'd blocks. |
duke@435 | 906 | const intptr_t badJNIHandleVal = (intptr_t) CONST64(0xFEFEFEFEFEFEFEFE); // value used to zap jni handle area |
duke@435 | 907 | const juint badHeapWordVal = 0xBAADBABE; // value used to zap heap after GC |
duke@435 | 908 | const int badCodeHeapNewVal= 0xCC; // value used to zap Code heap at allocation |
duke@435 | 909 | const int badCodeHeapFreeVal = 0xDD; // value used to zap Code heap at deallocation |
duke@435 | 910 | |
duke@435 | 911 | |
duke@435 | 912 | // (These must be implemented as #defines because C++ compilers are |
duke@435 | 913 | // not obligated to inline non-integral constants!) |
duke@435 | 914 | #define badAddress ((address)::badAddressVal) |
duke@435 | 915 | #define badOop ((oop)::badOopVal) |
duke@435 | 916 | #define badHeapWord (::badHeapWordVal) |
duke@435 | 917 | #define badJNIHandle ((oop)::badJNIHandleVal) |
duke@435 | 918 | |
jcoomes@1746 | 919 | // Default TaskQueue size is 16K (32-bit) or 128K (64-bit) |
jcoomes@1746 | 920 | #define TASKQUEUE_SIZE (NOT_LP64(1<<14) LP64_ONLY(1<<17)) |
duke@435 | 921 | |
duke@435 | 922 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 923 | // Utility functions for bitfield manipulations |
duke@435 | 924 | |
duke@435 | 925 | const intptr_t AllBits = ~0; // all bits set in a word |
duke@435 | 926 | const intptr_t NoBits = 0; // no bits set in a word |
duke@435 | 927 | const jlong NoLongBits = 0; // no bits set in a long |
duke@435 | 928 | const intptr_t OneBit = 1; // only right_most bit set in a word |
duke@435 | 929 | |
duke@435 | 930 | // get a word with the n.th or the right-most or left-most n bits set |
duke@435 | 931 | // (note: #define used only so that they can be used in enum constant definitions) |
duke@435 | 932 | #define nth_bit(n) (n >= BitsPerWord ? 0 : OneBit << (n)) |
duke@435 | 933 | #define right_n_bits(n) (nth_bit(n) - 1) |
duke@435 | 934 | #define left_n_bits(n) (right_n_bits(n) << (n >= BitsPerWord ? 0 : (BitsPerWord - n))) |
duke@435 | 935 | |
duke@435 | 936 | // bit-operations using a mask m |
duke@435 | 937 | inline void set_bits (intptr_t& x, intptr_t m) { x |= m; } |
duke@435 | 938 | inline void clear_bits (intptr_t& x, intptr_t m) { x &= ~m; } |
duke@435 | 939 | inline intptr_t mask_bits (intptr_t x, intptr_t m) { return x & m; } |
duke@435 | 940 | inline jlong mask_long_bits (jlong x, jlong m) { return x & m; } |
duke@435 | 941 | inline bool mask_bits_are_true (intptr_t flags, intptr_t mask) { return (flags & mask) == mask; } |
duke@435 | 942 | |
duke@435 | 943 | // bit-operations using the n.th bit |
duke@435 | 944 | inline void set_nth_bit(intptr_t& x, int n) { set_bits (x, nth_bit(n)); } |
duke@435 | 945 | inline void clear_nth_bit(intptr_t& x, int n) { clear_bits(x, nth_bit(n)); } |
duke@435 | 946 | inline bool is_set_nth_bit(intptr_t x, int n) { return mask_bits (x, nth_bit(n)) != NoBits; } |
duke@435 | 947 | |
duke@435 | 948 | // returns the bitfield of x starting at start_bit_no with length field_length (no sign-extension!) |
duke@435 | 949 | inline intptr_t bitfield(intptr_t x, int start_bit_no, int field_length) { |
duke@435 | 950 | return mask_bits(x >> start_bit_no, right_n_bits(field_length)); |
duke@435 | 951 | } |
duke@435 | 952 | |
duke@435 | 953 | |
duke@435 | 954 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 955 | // Utility functions for integers |
duke@435 | 956 | |
duke@435 | 957 | // Avoid use of global min/max macros which may cause unwanted double |
duke@435 | 958 | // evaluation of arguments. |
duke@435 | 959 | #ifdef max |
duke@435 | 960 | #undef max |
duke@435 | 961 | #endif |
duke@435 | 962 | |
duke@435 | 963 | #ifdef min |
duke@435 | 964 | #undef min |
duke@435 | 965 | #endif |
duke@435 | 966 | |
duke@435 | 967 | #define max(a,b) Do_not_use_max_use_MAX2_instead |
duke@435 | 968 | #define min(a,b) Do_not_use_min_use_MIN2_instead |
duke@435 | 969 | |
duke@435 | 970 | // It is necessary to use templates here. Having normal overloaded |
duke@435 | 971 | // functions does not work because it is necessary to provide both 32- |
duke@435 | 972 | // and 64-bit overloaded functions, which does not work, and having |
duke@435 | 973 | // explicitly-typed versions of these routines (i.e., MAX2I, MAX2L) |
duke@435 | 974 | // will be even more error-prone than macros. |
duke@435 | 975 | template<class T> inline T MAX2(T a, T b) { return (a > b) ? a : b; } |
duke@435 | 976 | template<class T> inline T MIN2(T a, T b) { return (a < b) ? a : b; } |
duke@435 | 977 | template<class T> inline T MAX3(T a, T b, T c) { return MAX2(MAX2(a, b), c); } |
duke@435 | 978 | template<class T> inline T MIN3(T a, T b, T c) { return MIN2(MIN2(a, b), c); } |
duke@435 | 979 | template<class T> inline T MAX4(T a, T b, T c, T d) { return MAX2(MAX3(a, b, c), d); } |
duke@435 | 980 | template<class T> inline T MIN4(T a, T b, T c, T d) { return MIN2(MIN3(a, b, c), d); } |
duke@435 | 981 | |
duke@435 | 982 | template<class T> inline T ABS(T x) { return (x > 0) ? x : -x; } |
duke@435 | 983 | |
duke@435 | 984 | // true if x is a power of 2, false otherwise |
duke@435 | 985 | inline bool is_power_of_2(intptr_t x) { |
duke@435 | 986 | return ((x != NoBits) && (mask_bits(x, x - 1) == NoBits)); |
duke@435 | 987 | } |
duke@435 | 988 | |
duke@435 | 989 | // long version of is_power_of_2 |
duke@435 | 990 | inline bool is_power_of_2_long(jlong x) { |
duke@435 | 991 | return ((x != NoLongBits) && (mask_long_bits(x, x - 1) == NoLongBits)); |
duke@435 | 992 | } |
duke@435 | 993 | |
duke@435 | 994 | //* largest i such that 2^i <= x |
duke@435 | 995 | // A negative value of 'x' will return '31' |
duke@435 | 996 | inline int log2_intptr(intptr_t x) { |
duke@435 | 997 | int i = -1; |
duke@435 | 998 | uintptr_t p = 1; |
duke@435 | 999 | while (p != 0 && p <= (uintptr_t)x) { |
duke@435 | 1000 | // p = 2^(i+1) && p <= x (i.e., 2^(i+1) <= x) |
duke@435 | 1001 | i++; p *= 2; |
duke@435 | 1002 | } |
duke@435 | 1003 | // p = 2^(i+1) && x < p (i.e., 2^i <= x < 2^(i+1)) |
twisti@1040 | 1004 | // (if p = 0 then overflow occurred and i = 31) |
duke@435 | 1005 | return i; |
duke@435 | 1006 | } |
duke@435 | 1007 | |
duke@435 | 1008 | //* largest i such that 2^i <= x |
duke@435 | 1009 | // A negative value of 'x' will return '63' |
duke@435 | 1010 | inline int log2_long(jlong x) { |
duke@435 | 1011 | int i = -1; |
duke@435 | 1012 | julong p = 1; |
duke@435 | 1013 | while (p != 0 && p <= (julong)x) { |
duke@435 | 1014 | // p = 2^(i+1) && p <= x (i.e., 2^(i+1) <= x) |
duke@435 | 1015 | i++; p *= 2; |
duke@435 | 1016 | } |
duke@435 | 1017 | // p = 2^(i+1) && x < p (i.e., 2^i <= x < 2^(i+1)) |
twisti@1040 | 1018 | // (if p = 0 then overflow occurred and i = 63) |
duke@435 | 1019 | return i; |
duke@435 | 1020 | } |
duke@435 | 1021 | |
duke@435 | 1022 | //* the argument must be exactly a power of 2 |
duke@435 | 1023 | inline int exact_log2(intptr_t x) { |
duke@435 | 1024 | #ifdef ASSERT |
duke@435 | 1025 | if (!is_power_of_2(x)) basic_fatal("x must be a power of 2"); |
duke@435 | 1026 | #endif |
duke@435 | 1027 | return log2_intptr(x); |
duke@435 | 1028 | } |
duke@435 | 1029 | |
twisti@1003 | 1030 | //* the argument must be exactly a power of 2 |
twisti@1003 | 1031 | inline int exact_log2_long(jlong x) { |
twisti@1003 | 1032 | #ifdef ASSERT |
twisti@1003 | 1033 | if (!is_power_of_2_long(x)) basic_fatal("x must be a power of 2"); |
twisti@1003 | 1034 | #endif |
twisti@1003 | 1035 | return log2_long(x); |
twisti@1003 | 1036 | } |
twisti@1003 | 1037 | |
duke@435 | 1038 | |
duke@435 | 1039 | // returns integer round-up to the nearest multiple of s (s must be a power of two) |
duke@435 | 1040 | inline intptr_t round_to(intptr_t x, uintx s) { |
duke@435 | 1041 | #ifdef ASSERT |
duke@435 | 1042 | if (!is_power_of_2(s)) basic_fatal("s must be a power of 2"); |
duke@435 | 1043 | #endif |
duke@435 | 1044 | const uintx m = s - 1; |
duke@435 | 1045 | return mask_bits(x + m, ~m); |
duke@435 | 1046 | } |
duke@435 | 1047 | |
duke@435 | 1048 | // returns integer round-down to the nearest multiple of s (s must be a power of two) |
duke@435 | 1049 | inline intptr_t round_down(intptr_t x, uintx s) { |
duke@435 | 1050 | #ifdef ASSERT |
duke@435 | 1051 | if (!is_power_of_2(s)) basic_fatal("s must be a power of 2"); |
duke@435 | 1052 | #endif |
duke@435 | 1053 | const uintx m = s - 1; |
duke@435 | 1054 | return mask_bits(x, ~m); |
duke@435 | 1055 | } |
duke@435 | 1056 | |
duke@435 | 1057 | |
duke@435 | 1058 | inline bool is_odd (intx x) { return x & 1; } |
duke@435 | 1059 | inline bool is_even(intx x) { return !is_odd(x); } |
duke@435 | 1060 | |
duke@435 | 1061 | // "to" should be greater than "from." |
duke@435 | 1062 | inline intx byte_size(void* from, void* to) { |
duke@435 | 1063 | return (address)to - (address)from; |
duke@435 | 1064 | } |
duke@435 | 1065 | |
duke@435 | 1066 | //---------------------------------------------------------------------------------------------------- |
duke@435 | 1067 | // Avoid non-portable casts with these routines (DEPRECATED) |
duke@435 | 1068 | |
duke@435 | 1069 | // NOTE: USE Bytes class INSTEAD WHERE POSSIBLE |
duke@435 | 1070 | // Bytes is optimized machine-specifically and may be much faster then the portable routines below. |
duke@435 | 1071 | |
duke@435 | 1072 | // Given sequence of four bytes, build into a 32-bit word |
duke@435 | 1073 | // following the conventions used in class files. |
duke@435 | 1074 | // On the 386, this could be realized with a simple address cast. |
duke@435 | 1075 | // |
duke@435 | 1076 | |
duke@435 | 1077 | // This routine takes eight bytes: |
duke@435 | 1078 | inline u8 build_u8_from( u1 c1, u1 c2, u1 c3, u1 c4, u1 c5, u1 c6, u1 c7, u1 c8 ) { |
twisti@2144 | 1079 | return (( u8(c1) << 56 ) & ( u8(0xff) << 56 )) |
twisti@2144 | 1080 | | (( u8(c2) << 48 ) & ( u8(0xff) << 48 )) |
twisti@2144 | 1081 | | (( u8(c3) << 40 ) & ( u8(0xff) << 40 )) |
twisti@2144 | 1082 | | (( u8(c4) << 32 ) & ( u8(0xff) << 32 )) |
twisti@2144 | 1083 | | (( u8(c5) << 24 ) & ( u8(0xff) << 24 )) |
twisti@2144 | 1084 | | (( u8(c6) << 16 ) & ( u8(0xff) << 16 )) |
twisti@2144 | 1085 | | (( u8(c7) << 8 ) & ( u8(0xff) << 8 )) |
twisti@2144 | 1086 | | (( u8(c8) << 0 ) & ( u8(0xff) << 0 )); |
duke@435 | 1087 | } |
duke@435 | 1088 | |
duke@435 | 1089 | // This routine takes four bytes: |
duke@435 | 1090 | inline u4 build_u4_from( u1 c1, u1 c2, u1 c3, u1 c4 ) { |
twisti@2144 | 1091 | return (( u4(c1) << 24 ) & 0xff000000) |
twisti@2144 | 1092 | | (( u4(c2) << 16 ) & 0x00ff0000) |
twisti@2144 | 1093 | | (( u4(c3) << 8 ) & 0x0000ff00) |
twisti@2144 | 1094 | | (( u4(c4) << 0 ) & 0x000000ff); |
duke@435 | 1095 | } |
duke@435 | 1096 | |
duke@435 | 1097 | // And this one works if the four bytes are contiguous in memory: |
duke@435 | 1098 | inline u4 build_u4_from( u1* p ) { |
duke@435 | 1099 | return build_u4_from( p[0], p[1], p[2], p[3] ); |
duke@435 | 1100 | } |
duke@435 | 1101 | |
duke@435 | 1102 | // Ditto for two-byte ints: |
duke@435 | 1103 | inline u2 build_u2_from( u1 c1, u1 c2 ) { |
twisti@2144 | 1104 | return u2((( u2(c1) << 8 ) & 0xff00) |
twisti@2144 | 1105 | | (( u2(c2) << 0 ) & 0x00ff)); |
duke@435 | 1106 | } |
duke@435 | 1107 | |
duke@435 | 1108 | // And this one works if the two bytes are contiguous in memory: |
duke@435 | 1109 | inline u2 build_u2_from( u1* p ) { |
duke@435 | 1110 | return build_u2_from( p[0], p[1] ); |
duke@435 | 1111 | } |
duke@435 | 1112 | |
duke@435 | 1113 | // Ditto for floats: |
duke@435 | 1114 | inline jfloat build_float_from( u1 c1, u1 c2, u1 c3, u1 c4 ) { |
duke@435 | 1115 | u4 u = build_u4_from( c1, c2, c3, c4 ); |
duke@435 | 1116 | return *(jfloat*)&u; |
duke@435 | 1117 | } |
duke@435 | 1118 | |
duke@435 | 1119 | inline jfloat build_float_from( u1* p ) { |
duke@435 | 1120 | u4 u = build_u4_from( p ); |
duke@435 | 1121 | return *(jfloat*)&u; |
duke@435 | 1122 | } |
duke@435 | 1123 | |
duke@435 | 1124 | |
duke@435 | 1125 | // now (64-bit) longs |
duke@435 | 1126 | |
duke@435 | 1127 | inline jlong build_long_from( u1 c1, u1 c2, u1 c3, u1 c4, u1 c5, u1 c6, u1 c7, u1 c8 ) { |
twisti@2144 | 1128 | return (( jlong(c1) << 56 ) & ( jlong(0xff) << 56 )) |
twisti@2144 | 1129 | | (( jlong(c2) << 48 ) & ( jlong(0xff) << 48 )) |
twisti@2144 | 1130 | | (( jlong(c3) << 40 ) & ( jlong(0xff) << 40 )) |
twisti@2144 | 1131 | | (( jlong(c4) << 32 ) & ( jlong(0xff) << 32 )) |
twisti@2144 | 1132 | | (( jlong(c5) << 24 ) & ( jlong(0xff) << 24 )) |
twisti@2144 | 1133 | | (( jlong(c6) << 16 ) & ( jlong(0xff) << 16 )) |
twisti@2144 | 1134 | | (( jlong(c7) << 8 ) & ( jlong(0xff) << 8 )) |
twisti@2144 | 1135 | | (( jlong(c8) << 0 ) & ( jlong(0xff) << 0 )); |
duke@435 | 1136 | } |
duke@435 | 1137 | |
duke@435 | 1138 | inline jlong build_long_from( u1* p ) { |
duke@435 | 1139 | return build_long_from( p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7] ); |
duke@435 | 1140 | } |
duke@435 | 1141 | |
duke@435 | 1142 | |
duke@435 | 1143 | // Doubles, too! |
duke@435 | 1144 | inline jdouble build_double_from( u1 c1, u1 c2, u1 c3, u1 c4, u1 c5, u1 c6, u1 c7, u1 c8 ) { |
duke@435 | 1145 | jlong u = build_long_from( c1, c2, c3, c4, c5, c6, c7, c8 ); |
duke@435 | 1146 | return *(jdouble*)&u; |
duke@435 | 1147 | } |
duke@435 | 1148 | |
duke@435 | 1149 | inline jdouble build_double_from( u1* p ) { |
duke@435 | 1150 | jlong u = build_long_from( p ); |
duke@435 | 1151 | return *(jdouble*)&u; |
duke@435 | 1152 | } |
duke@435 | 1153 | |
duke@435 | 1154 | |
duke@435 | 1155 | // Portable routines to go the other way: |
duke@435 | 1156 | |
duke@435 | 1157 | inline void explode_short_to( u2 x, u1& c1, u1& c2 ) { |
duke@435 | 1158 | c1 = u1(x >> 8); |
duke@435 | 1159 | c2 = u1(x); |
duke@435 | 1160 | } |
duke@435 | 1161 | |
duke@435 | 1162 | inline void explode_short_to( u2 x, u1* p ) { |
duke@435 | 1163 | explode_short_to( x, p[0], p[1]); |
duke@435 | 1164 | } |
duke@435 | 1165 | |
duke@435 | 1166 | inline void explode_int_to( u4 x, u1& c1, u1& c2, u1& c3, u1& c4 ) { |
duke@435 | 1167 | c1 = u1(x >> 24); |
duke@435 | 1168 | c2 = u1(x >> 16); |
duke@435 | 1169 | c3 = u1(x >> 8); |
duke@435 | 1170 | c4 = u1(x); |
duke@435 | 1171 | } |
duke@435 | 1172 | |
duke@435 | 1173 | inline void explode_int_to( u4 x, u1* p ) { |
duke@435 | 1174 | explode_int_to( x, p[0], p[1], p[2], p[3]); |
duke@435 | 1175 | } |
duke@435 | 1176 | |
duke@435 | 1177 | |
duke@435 | 1178 | // Pack and extract shorts to/from ints: |
duke@435 | 1179 | |
duke@435 | 1180 | inline int extract_low_short_from_int(jint x) { |
duke@435 | 1181 | return x & 0xffff; |
duke@435 | 1182 | } |
duke@435 | 1183 | |
duke@435 | 1184 | inline int extract_high_short_from_int(jint x) { |
duke@435 | 1185 | return (x >> 16) & 0xffff; |
duke@435 | 1186 | } |
duke@435 | 1187 | |
duke@435 | 1188 | inline int build_int_from_shorts( jushort low, jushort high ) { |
duke@435 | 1189 | return ((int)((unsigned int)high << 16) | (unsigned int)low); |
duke@435 | 1190 | } |
duke@435 | 1191 | |
duke@435 | 1192 | // Printf-style formatters for fixed- and variable-width types as pointers and |
never@3156 | 1193 | // integers. These are derived from the definitions in inttypes.h. If the platform |
never@3156 | 1194 | // doesn't provide appropriate definitions, they should be provided in |
never@3156 | 1195 | // the compiler-specific definitions file (e.g., globalDefinitions_gcc.hpp) |
duke@435 | 1196 | |
tonyp@2643 | 1197 | #define BOOL_TO_STR(_b_) ((_b_) ? "true" : "false") |
tonyp@2472 | 1198 | |
duke@435 | 1199 | // Format 32-bit quantities. |
never@3156 | 1200 | #define INT32_FORMAT "%" PRId32 |
never@3156 | 1201 | #define UINT32_FORMAT "%" PRIu32 |
never@3156 | 1202 | #define INT32_FORMAT_W(width) "%" #width PRId32 |
never@3156 | 1203 | #define UINT32_FORMAT_W(width) "%" #width PRIu32 |
duke@435 | 1204 | |
never@3156 | 1205 | #define PTR32_FORMAT "0x%08" PRIx32 |
duke@435 | 1206 | |
duke@435 | 1207 | // Format 64-bit quantities. |
never@3156 | 1208 | #define INT64_FORMAT "%" PRId64 |
never@3156 | 1209 | #define UINT64_FORMAT "%" PRIu64 |
never@3156 | 1210 | #define INT64_FORMAT_W(width) "%" #width PRId64 |
never@3156 | 1211 | #define UINT64_FORMAT_W(width) "%" #width PRIu64 |
duke@435 | 1212 | |
never@3156 | 1213 | #define PTR64_FORMAT "0x%016" PRIx64 |
duke@435 | 1214 | |
never@3156 | 1215 | // Format pointers which change size between 32- and 64-bit. |
duke@435 | 1216 | #ifdef _LP64 |
never@3156 | 1217 | #define INTPTR_FORMAT "0x%016" PRIxPTR |
never@3156 | 1218 | #define PTR_FORMAT "0x%016" PRIxPTR |
duke@435 | 1219 | #else // !_LP64 |
never@3156 | 1220 | #define INTPTR_FORMAT "0x%08" PRIxPTR |
never@3156 | 1221 | #define PTR_FORMAT "0x%08" PRIxPTR |
duke@435 | 1222 | #endif // _LP64 |
duke@435 | 1223 | |
never@3156 | 1224 | #define SSIZE_FORMAT "%" PRIdPTR |
never@3156 | 1225 | #define SIZE_FORMAT "%" PRIuPTR |
never@3156 | 1226 | #define SSIZE_FORMAT_W(width) "%" #width PRIdPTR |
never@3156 | 1227 | #define SIZE_FORMAT_W(width) "%" #width PRIuPTR |
never@3156 | 1228 | |
never@3156 | 1229 | #define INTX_FORMAT "%" PRIdPTR |
never@3156 | 1230 | #define UINTX_FORMAT "%" PRIuPTR |
never@3156 | 1231 | #define INTX_FORMAT_W(width) "%" #width PRIdPTR |
never@3156 | 1232 | #define UINTX_FORMAT_W(width) "%" #width PRIuPTR |
never@3156 | 1233 | |
duke@435 | 1234 | |
duke@435 | 1235 | // Enable zap-a-lot if in debug version. |
duke@435 | 1236 | |
duke@435 | 1237 | # ifdef ASSERT |
duke@435 | 1238 | # ifdef COMPILER2 |
duke@435 | 1239 | # define ENABLE_ZAP_DEAD_LOCALS |
duke@435 | 1240 | #endif /* COMPILER2 */ |
duke@435 | 1241 | # endif /* ASSERT */ |
duke@435 | 1242 | |
duke@435 | 1243 | #define ARRAY_SIZE(array) (sizeof(array)/sizeof((array)[0])) |
stefank@2314 | 1244 | |
stefank@2314 | 1245 | #endif // SHARE_VM_UTILITIES_GLOBALDEFINITIONS_HPP |