Tue, 23 Nov 2010 13:22:55 -0800
6989984: Use standard include model for Hospot
Summary: Replaced MakeDeps and the includeDB files with more standardized solutions.
Reviewed-by: coleenp, kvn, kamg
1 //
2 // Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 //
5 // This code is free software; you can redistribute it and/or modify it
6 // under the terms of the GNU General Public License version 2 only, as
7 // published by the Free Software Foundation.
8 //
9 // This code is distributed in the hope that it will be useful, but WITHOUT
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 // version 2 for more details (a copy is included in the LICENSE file that
13 // accompanied this code).
14 //
15 // You should have received a copy of the GNU General Public License version
16 // 2 along with this work; if not, write to the Free Software Foundation,
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 //
19 // Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 // or visit www.oracle.com if you need additional information or have any
21 // questions.
22 //
23 //
25 // X86 Architecture Description File
27 //----------REGISTER DEFINITION BLOCK------------------------------------------
28 // This information is used by the matcher and the register allocator to
29 // describe individual registers and classes of registers within the target
30 // archtecture.
32 register %{
33 //----------Architecture Description Register Definitions----------------------
34 // General Registers
35 // "reg_def" name ( register save type, C convention save type,
36 // ideal register type, encoding );
37 // Register Save Types:
38 //
39 // NS = No-Save: The register allocator assumes that these registers
40 // can be used without saving upon entry to the method, &
41 // that they do not need to be saved at call sites.
42 //
43 // SOC = Save-On-Call: The register allocator assumes that these registers
44 // can be used without saving upon entry to the method,
45 // but that they must be saved at call sites.
46 //
47 // SOE = Save-On-Entry: The register allocator assumes that these registers
48 // must be saved before using them upon entry to the
49 // method, but they do not need to be saved at call
50 // sites.
51 //
52 // AS = Always-Save: The register allocator assumes that these registers
53 // must be saved before using them upon entry to the
54 // method, & that they must be saved at call sites.
55 //
56 // Ideal Register Type is used to determine how to save & restore a
57 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get
58 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI.
59 //
60 // The encoding number is the actual bit-pattern placed into the opcodes.
62 // General Registers
63 // Previously set EBX, ESI, and EDI as save-on-entry for java code
64 // Turn off SOE in java-code due to frequent use of uncommon-traps.
65 // Now that allocator is better, turn on ESI and EDI as SOE registers.
67 reg_def EBX(SOC, SOE, Op_RegI, 3, rbx->as_VMReg());
68 reg_def ECX(SOC, SOC, Op_RegI, 1, rcx->as_VMReg());
69 reg_def ESI(SOC, SOE, Op_RegI, 6, rsi->as_VMReg());
70 reg_def EDI(SOC, SOE, Op_RegI, 7, rdi->as_VMReg());
71 // now that adapter frames are gone EBP is always saved and restored by the prolog/epilog code
72 reg_def EBP(NS, SOE, Op_RegI, 5, rbp->as_VMReg());
73 reg_def EDX(SOC, SOC, Op_RegI, 2, rdx->as_VMReg());
74 reg_def EAX(SOC, SOC, Op_RegI, 0, rax->as_VMReg());
75 reg_def ESP( NS, NS, Op_RegI, 4, rsp->as_VMReg());
77 // Special Registers
78 reg_def EFLAGS(SOC, SOC, 0, 8, VMRegImpl::Bad());
80 // Float registers. We treat TOS/FPR0 special. It is invisible to the
81 // allocator, and only shows up in the encodings.
82 reg_def FPR0L( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
83 reg_def FPR0H( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
84 // Ok so here's the trick FPR1 is really st(0) except in the midst
85 // of emission of assembly for a machnode. During the emission the fpu stack
86 // is pushed making FPR1 == st(1) temporarily. However at any safepoint
87 // the stack will not have this element so FPR1 == st(0) from the
88 // oopMap viewpoint. This same weirdness with numbering causes
89 // instruction encoding to have to play games with the register
90 // encode to correct for this 0/1 issue. See MachSpillCopyNode::implementation
91 // where it does flt->flt moves to see an example
92 //
93 reg_def FPR1L( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg());
94 reg_def FPR1H( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg()->next());
95 reg_def FPR2L( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg());
96 reg_def FPR2H( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg()->next());
97 reg_def FPR3L( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg());
98 reg_def FPR3H( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg()->next());
99 reg_def FPR4L( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg());
100 reg_def FPR4H( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg()->next());
101 reg_def FPR5L( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg());
102 reg_def FPR5H( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg()->next());
103 reg_def FPR6L( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg());
104 reg_def FPR6H( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg()->next());
105 reg_def FPR7L( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg());
106 reg_def FPR7H( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg()->next());
108 // XMM registers. 128-bit registers or 4 words each, labeled a-d.
109 // Word a in each register holds a Float, words ab hold a Double.
110 // We currently do not use the SIMD capabilities, so registers cd
111 // are unused at the moment.
112 reg_def XMM0a( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg());
113 reg_def XMM0b( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg()->next());
114 reg_def XMM1a( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg());
115 reg_def XMM1b( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg()->next());
116 reg_def XMM2a( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg());
117 reg_def XMM2b( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg()->next());
118 reg_def XMM3a( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg());
119 reg_def XMM3b( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg()->next());
120 reg_def XMM4a( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg());
121 reg_def XMM4b( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg()->next());
122 reg_def XMM5a( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg());
123 reg_def XMM5b( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg()->next());
124 reg_def XMM6a( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg());
125 reg_def XMM6b( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg()->next());
126 reg_def XMM7a( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg());
127 reg_def XMM7b( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg()->next());
129 // Specify priority of register selection within phases of register
130 // allocation. Highest priority is first. A useful heuristic is to
131 // give registers a low priority when they are required by machine
132 // instructions, like EAX and EDX. Registers which are used as
133 // pairs must fall on an even boundary (witness the FPR#L's in this list).
134 // For the Intel integer registers, the equivalent Long pairs are
135 // EDX:EAX, EBX:ECX, and EDI:EBP.
136 alloc_class chunk0( ECX, EBX, EBP, EDI, EAX, EDX, ESI, ESP,
137 FPR0L, FPR0H, FPR1L, FPR1H, FPR2L, FPR2H,
138 FPR3L, FPR3H, FPR4L, FPR4H, FPR5L, FPR5H,
139 FPR6L, FPR6H, FPR7L, FPR7H );
141 alloc_class chunk1( XMM0a, XMM0b,
142 XMM1a, XMM1b,
143 XMM2a, XMM2b,
144 XMM3a, XMM3b,
145 XMM4a, XMM4b,
146 XMM5a, XMM5b,
147 XMM6a, XMM6b,
148 XMM7a, XMM7b, EFLAGS);
151 //----------Architecture Description Register Classes--------------------------
152 // Several register classes are automatically defined based upon information in
153 // this architecture description.
154 // 1) reg_class inline_cache_reg ( /* as def'd in frame section */ )
155 // 2) reg_class compiler_method_oop_reg ( /* as def'd in frame section */ )
156 // 2) reg_class interpreter_method_oop_reg ( /* as def'd in frame section */ )
157 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ )
158 //
159 // Class for all registers
160 reg_class any_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX, ESP);
161 // Class for general registers
162 reg_class e_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX);
163 // Class for general registers which may be used for implicit null checks on win95
164 // Also safe for use by tailjump. We don't want to allocate in rbp,
165 reg_class e_reg_no_rbp(EAX, EDX, EDI, ESI, ECX, EBX);
166 // Class of "X" registers
167 reg_class x_reg(EBX, ECX, EDX, EAX);
168 // Class of registers that can appear in an address with no offset.
169 // EBP and ESP require an extra instruction byte for zero offset.
170 // Used in fast-unlock
171 reg_class p_reg(EDX, EDI, ESI, EBX);
172 // Class for general registers not including ECX
173 reg_class ncx_reg(EAX, EDX, EBP, EDI, ESI, EBX);
174 // Class for general registers not including EAX
175 reg_class nax_reg(EDX, EDI, ESI, ECX, EBX);
176 // Class for general registers not including EAX or EBX.
177 reg_class nabx_reg(EDX, EDI, ESI, ECX, EBP);
178 // Class of EAX (for multiply and divide operations)
179 reg_class eax_reg(EAX);
180 // Class of EBX (for atomic add)
181 reg_class ebx_reg(EBX);
182 // Class of ECX (for shift and JCXZ operations and cmpLTMask)
183 reg_class ecx_reg(ECX);
184 // Class of EDX (for multiply and divide operations)
185 reg_class edx_reg(EDX);
186 // Class of EDI (for synchronization)
187 reg_class edi_reg(EDI);
188 // Class of ESI (for synchronization)
189 reg_class esi_reg(ESI);
190 // Singleton class for interpreter's stack pointer
191 reg_class ebp_reg(EBP);
192 // Singleton class for stack pointer
193 reg_class sp_reg(ESP);
194 // Singleton class for instruction pointer
195 // reg_class ip_reg(EIP);
196 // Singleton class for condition codes
197 reg_class int_flags(EFLAGS);
198 // Class of integer register pairs
199 reg_class long_reg( EAX,EDX, ECX,EBX, EBP,EDI );
200 // Class of integer register pairs that aligns with calling convention
201 reg_class eadx_reg( EAX,EDX );
202 reg_class ebcx_reg( ECX,EBX );
203 // Not AX or DX, used in divides
204 reg_class nadx_reg( EBX,ECX,ESI,EDI,EBP );
206 // Floating point registers. Notice FPR0 is not a choice.
207 // FPR0 is not ever allocated; we use clever encodings to fake
208 // a 2-address instructions out of Intels FP stack.
209 reg_class flt_reg( FPR1L,FPR2L,FPR3L,FPR4L,FPR5L,FPR6L,FPR7L );
211 // make a register class for SSE registers
212 reg_class xmm_reg(XMM0a, XMM1a, XMM2a, XMM3a, XMM4a, XMM5a, XMM6a, XMM7a);
214 // make a double register class for SSE2 registers
215 reg_class xdb_reg(XMM0a,XMM0b, XMM1a,XMM1b, XMM2a,XMM2b, XMM3a,XMM3b,
216 XMM4a,XMM4b, XMM5a,XMM5b, XMM6a,XMM6b, XMM7a,XMM7b );
218 reg_class dbl_reg( FPR1L,FPR1H, FPR2L,FPR2H, FPR3L,FPR3H,
219 FPR4L,FPR4H, FPR5L,FPR5H, FPR6L,FPR6H,
220 FPR7L,FPR7H );
222 reg_class flt_reg0( FPR1L );
223 reg_class dbl_reg0( FPR1L,FPR1H );
224 reg_class dbl_reg1( FPR2L,FPR2H );
225 reg_class dbl_notreg0( FPR2L,FPR2H, FPR3L,FPR3H, FPR4L,FPR4H,
226 FPR5L,FPR5H, FPR6L,FPR6H, FPR7L,FPR7H );
228 // XMM6 and XMM7 could be used as temporary registers for long, float and
229 // double values for SSE2.
230 reg_class xdb_reg6( XMM6a,XMM6b );
231 reg_class xdb_reg7( XMM7a,XMM7b );
232 %}
235 //----------SOURCE BLOCK-------------------------------------------------------
236 // This is a block of C++ code which provides values, functions, and
237 // definitions necessary in the rest of the architecture description
238 source_hpp %{
239 // Must be visible to the DFA in dfa_x86_32.cpp
240 extern bool is_operand_hi32_zero(Node* n);
241 %}
243 source %{
244 #define RELOC_IMM32 Assembler::imm_operand
245 #define RELOC_DISP32 Assembler::disp32_operand
247 #define __ _masm.
249 // How to find the high register of a Long pair, given the low register
250 #define HIGH_FROM_LOW(x) ((x)+2)
252 // These masks are used to provide 128-bit aligned bitmasks to the XMM
253 // instructions, to allow sign-masking or sign-bit flipping. They allow
254 // fast versions of NegF/NegD and AbsF/AbsD.
256 // Note: 'double' and 'long long' have 32-bits alignment on x86.
257 static jlong* double_quadword(jlong *adr, jlong lo, jlong hi) {
258 // Use the expression (adr)&(~0xF) to provide 128-bits aligned address
259 // of 128-bits operands for SSE instructions.
260 jlong *operand = (jlong*)(((uintptr_t)adr)&((uintptr_t)(~0xF)));
261 // Store the value to a 128-bits operand.
262 operand[0] = lo;
263 operand[1] = hi;
264 return operand;
265 }
267 // Buffer for 128-bits masks used by SSE instructions.
268 static jlong fp_signmask_pool[(4+1)*2]; // 4*128bits(data) + 128bits(alignment)
270 // Static initialization during VM startup.
271 static jlong *float_signmask_pool = double_quadword(&fp_signmask_pool[1*2], CONST64(0x7FFFFFFF7FFFFFFF), CONST64(0x7FFFFFFF7FFFFFFF));
272 static jlong *double_signmask_pool = double_quadword(&fp_signmask_pool[2*2], CONST64(0x7FFFFFFFFFFFFFFF), CONST64(0x7FFFFFFFFFFFFFFF));
273 static jlong *float_signflip_pool = double_quadword(&fp_signmask_pool[3*2], CONST64(0x8000000080000000), CONST64(0x8000000080000000));
274 static jlong *double_signflip_pool = double_quadword(&fp_signmask_pool[4*2], CONST64(0x8000000000000000), CONST64(0x8000000000000000));
276 // Offset hacking within calls.
277 static int pre_call_FPU_size() {
278 if (Compile::current()->in_24_bit_fp_mode())
279 return 6; // fldcw
280 return 0;
281 }
283 static int preserve_SP_size() {
284 return LP64_ONLY(1 +) 2; // [rex,] op, rm(reg/reg)
285 }
287 // !!!!! Special hack to get all type of calls to specify the byte offset
288 // from the start of the call to the point where the return address
289 // will point.
290 int MachCallStaticJavaNode::ret_addr_offset() {
291 int offset = 5 + pre_call_FPU_size(); // 5 bytes from start of call to where return address points
292 if (_method_handle_invoke)
293 offset += preserve_SP_size();
294 return offset;
295 }
297 int MachCallDynamicJavaNode::ret_addr_offset() {
298 return 10 + pre_call_FPU_size(); // 10 bytes from start of call to where return address points
299 }
301 static int sizeof_FFree_Float_Stack_All = -1;
303 int MachCallRuntimeNode::ret_addr_offset() {
304 assert(sizeof_FFree_Float_Stack_All != -1, "must have been emitted already");
305 return sizeof_FFree_Float_Stack_All + 5 + pre_call_FPU_size();
306 }
308 // Indicate if the safepoint node needs the polling page as an input.
309 // Since x86 does have absolute addressing, it doesn't.
310 bool SafePointNode::needs_polling_address_input() {
311 return false;
312 }
314 //
315 // Compute padding required for nodes which need alignment
316 //
318 // The address of the call instruction needs to be 4-byte aligned to
319 // ensure that it does not span a cache line so that it can be patched.
320 int CallStaticJavaDirectNode::compute_padding(int current_offset) const {
321 current_offset += pre_call_FPU_size(); // skip fldcw, if any
322 current_offset += 1; // skip call opcode byte
323 return round_to(current_offset, alignment_required()) - current_offset;
324 }
326 // The address of the call instruction needs to be 4-byte aligned to
327 // ensure that it does not span a cache line so that it can be patched.
328 int CallStaticJavaHandleNode::compute_padding(int current_offset) const {
329 current_offset += pre_call_FPU_size(); // skip fldcw, if any
330 current_offset += preserve_SP_size(); // skip mov rbp, rsp
331 current_offset += 1; // skip call opcode byte
332 return round_to(current_offset, alignment_required()) - current_offset;
333 }
335 // The address of the call instruction needs to be 4-byte aligned to
336 // ensure that it does not span a cache line so that it can be patched.
337 int CallDynamicJavaDirectNode::compute_padding(int current_offset) const {
338 current_offset += pre_call_FPU_size(); // skip fldcw, if any
339 current_offset += 5; // skip MOV instruction
340 current_offset += 1; // skip call opcode byte
341 return round_to(current_offset, alignment_required()) - current_offset;
342 }
344 #ifndef PRODUCT
345 void MachBreakpointNode::format( PhaseRegAlloc *, outputStream* st ) const {
346 st->print("INT3");
347 }
348 #endif
350 // EMIT_RM()
351 void emit_rm(CodeBuffer &cbuf, int f1, int f2, int f3) {
352 unsigned char c = (unsigned char)((f1 << 6) | (f2 << 3) | f3);
353 cbuf.insts()->emit_int8(c);
354 }
356 // EMIT_CC()
357 void emit_cc(CodeBuffer &cbuf, int f1, int f2) {
358 unsigned char c = (unsigned char)( f1 | f2 );
359 cbuf.insts()->emit_int8(c);
360 }
362 // EMIT_OPCODE()
363 void emit_opcode(CodeBuffer &cbuf, int code) {
364 cbuf.insts()->emit_int8((unsigned char) code);
365 }
367 // EMIT_OPCODE() w/ relocation information
368 void emit_opcode(CodeBuffer &cbuf, int code, relocInfo::relocType reloc, int offset = 0) {
369 cbuf.relocate(cbuf.insts_mark() + offset, reloc);
370 emit_opcode(cbuf, code);
371 }
373 // EMIT_D8()
374 void emit_d8(CodeBuffer &cbuf, int d8) {
375 cbuf.insts()->emit_int8((unsigned char) d8);
376 }
378 // EMIT_D16()
379 void emit_d16(CodeBuffer &cbuf, int d16) {
380 cbuf.insts()->emit_int16(d16);
381 }
383 // EMIT_D32()
384 void emit_d32(CodeBuffer &cbuf, int d32) {
385 cbuf.insts()->emit_int32(d32);
386 }
388 // emit 32 bit value and construct relocation entry from relocInfo::relocType
389 void emit_d32_reloc(CodeBuffer &cbuf, int d32, relocInfo::relocType reloc,
390 int format) {
391 cbuf.relocate(cbuf.insts_mark(), reloc, format);
392 cbuf.insts()->emit_int32(d32);
393 }
395 // emit 32 bit value and construct relocation entry from RelocationHolder
396 void emit_d32_reloc(CodeBuffer &cbuf, int d32, RelocationHolder const& rspec,
397 int format) {
398 #ifdef ASSERT
399 if (rspec.reloc()->type() == relocInfo::oop_type && d32 != 0 && d32 != (int)Universe::non_oop_word()) {
400 assert(oop(d32)->is_oop() && (ScavengeRootsInCode || !oop(d32)->is_scavengable()), "cannot embed scavengable oops in code");
401 }
402 #endif
403 cbuf.relocate(cbuf.insts_mark(), rspec, format);
404 cbuf.insts()->emit_int32(d32);
405 }
407 // Access stack slot for load or store
408 void store_to_stackslot(CodeBuffer &cbuf, int opcode, int rm_field, int disp) {
409 emit_opcode( cbuf, opcode ); // (e.g., FILD [ESP+src])
410 if( -128 <= disp && disp <= 127 ) {
411 emit_rm( cbuf, 0x01, rm_field, ESP_enc ); // R/M byte
412 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
413 emit_d8 (cbuf, disp); // Displacement // R/M byte
414 } else {
415 emit_rm( cbuf, 0x02, rm_field, ESP_enc ); // R/M byte
416 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
417 emit_d32(cbuf, disp); // Displacement // R/M byte
418 }
419 }
421 // eRegI ereg, memory mem) %{ // emit_reg_mem
422 void encode_RegMem( CodeBuffer &cbuf, int reg_encoding, int base, int index, int scale, int displace, bool displace_is_oop ) {
423 // There is no index & no scale, use form without SIB byte
424 if ((index == 0x4) &&
425 (scale == 0) && (base != ESP_enc)) {
426 // If no displacement, mode is 0x0; unless base is [EBP]
427 if ( (displace == 0) && (base != EBP_enc) ) {
428 emit_rm(cbuf, 0x0, reg_encoding, base);
429 }
430 else { // If 8-bit displacement, mode 0x1
431 if ((displace >= -128) && (displace <= 127)
432 && !(displace_is_oop) ) {
433 emit_rm(cbuf, 0x1, reg_encoding, base);
434 emit_d8(cbuf, displace);
435 }
436 else { // If 32-bit displacement
437 if (base == -1) { // Special flag for absolute address
438 emit_rm(cbuf, 0x0, reg_encoding, 0x5);
439 // (manual lies; no SIB needed here)
440 if ( displace_is_oop ) {
441 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
442 } else {
443 emit_d32 (cbuf, displace);
444 }
445 }
446 else { // Normal base + offset
447 emit_rm(cbuf, 0x2, reg_encoding, base);
448 if ( displace_is_oop ) {
449 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
450 } else {
451 emit_d32 (cbuf, displace);
452 }
453 }
454 }
455 }
456 }
457 else { // Else, encode with the SIB byte
458 // If no displacement, mode is 0x0; unless base is [EBP]
459 if (displace == 0 && (base != EBP_enc)) { // If no displacement
460 emit_rm(cbuf, 0x0, reg_encoding, 0x4);
461 emit_rm(cbuf, scale, index, base);
462 }
463 else { // If 8-bit displacement, mode 0x1
464 if ((displace >= -128) && (displace <= 127)
465 && !(displace_is_oop) ) {
466 emit_rm(cbuf, 0x1, reg_encoding, 0x4);
467 emit_rm(cbuf, scale, index, base);
468 emit_d8(cbuf, displace);
469 }
470 else { // If 32-bit displacement
471 if (base == 0x04 ) {
472 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
473 emit_rm(cbuf, scale, index, 0x04);
474 } else {
475 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
476 emit_rm(cbuf, scale, index, base);
477 }
478 if ( displace_is_oop ) {
479 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
480 } else {
481 emit_d32 (cbuf, displace);
482 }
483 }
484 }
485 }
486 }
489 void encode_Copy( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
490 if( dst_encoding == src_encoding ) {
491 // reg-reg copy, use an empty encoding
492 } else {
493 emit_opcode( cbuf, 0x8B );
494 emit_rm(cbuf, 0x3, dst_encoding, src_encoding );
495 }
496 }
498 void encode_CopyXD( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
499 if( dst_encoding == src_encoding ) {
500 // reg-reg copy, use an empty encoding
501 } else {
502 MacroAssembler _masm(&cbuf);
504 __ movdqa(as_XMMRegister(dst_encoding), as_XMMRegister(src_encoding));
505 }
506 }
509 //=============================================================================
510 #ifndef PRODUCT
511 void MachPrologNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
512 Compile* C = ra_->C;
513 if( C->in_24_bit_fp_mode() ) {
514 st->print("FLDCW 24 bit fpu control word");
515 st->print_cr(""); st->print("\t");
516 }
518 int framesize = C->frame_slots() << LogBytesPerInt;
519 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
520 // Remove two words for return addr and rbp,
521 framesize -= 2*wordSize;
523 // Calls to C2R adapters often do not accept exceptional returns.
524 // We require that their callers must bang for them. But be careful, because
525 // some VM calls (such as call site linkage) can use several kilobytes of
526 // stack. But the stack safety zone should account for that.
527 // See bugs 4446381, 4468289, 4497237.
528 if (C->need_stack_bang(framesize)) {
529 st->print_cr("# stack bang"); st->print("\t");
530 }
531 st->print_cr("PUSHL EBP"); st->print("\t");
533 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
534 st->print("PUSH 0xBADB100D\t# Majik cookie for stack depth check");
535 st->print_cr(""); st->print("\t");
536 framesize -= wordSize;
537 }
539 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
540 if (framesize) {
541 st->print("SUB ESP,%d\t# Create frame",framesize);
542 }
543 } else {
544 st->print("SUB ESP,%d\t# Create frame",framesize);
545 }
546 }
547 #endif
550 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
551 Compile* C = ra_->C;
553 if (UseSSE >= 2 && VerifyFPU) {
554 MacroAssembler masm(&cbuf);
555 masm.verify_FPU(0, "FPU stack must be clean on entry");
556 }
558 // WARNING: Initial instruction MUST be 5 bytes or longer so that
559 // NativeJump::patch_verified_entry will be able to patch out the entry
560 // code safely. The fldcw is ok at 6 bytes, the push to verify stack
561 // depth is ok at 5 bytes, the frame allocation can be either 3 or
562 // 6 bytes. So if we don't do the fldcw or the push then we must
563 // use the 6 byte frame allocation even if we have no frame. :-(
564 // If method sets FPU control word do it now
565 if( C->in_24_bit_fp_mode() ) {
566 MacroAssembler masm(&cbuf);
567 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
568 }
570 int framesize = C->frame_slots() << LogBytesPerInt;
571 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
572 // Remove two words for return addr and rbp,
573 framesize -= 2*wordSize;
575 // Calls to C2R adapters often do not accept exceptional returns.
576 // We require that their callers must bang for them. But be careful, because
577 // some VM calls (such as call site linkage) can use several kilobytes of
578 // stack. But the stack safety zone should account for that.
579 // See bugs 4446381, 4468289, 4497237.
580 if (C->need_stack_bang(framesize)) {
581 MacroAssembler masm(&cbuf);
582 masm.generate_stack_overflow_check(framesize);
583 }
585 // We always push rbp, so that on return to interpreter rbp, will be
586 // restored correctly and we can correct the stack.
587 emit_opcode(cbuf, 0x50 | EBP_enc);
589 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
590 emit_opcode(cbuf, 0x68); // push 0xbadb100d
591 emit_d32(cbuf, 0xbadb100d);
592 framesize -= wordSize;
593 }
595 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
596 if (framesize) {
597 emit_opcode(cbuf, 0x83); // sub SP,#framesize
598 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
599 emit_d8(cbuf, framesize);
600 }
601 } else {
602 emit_opcode(cbuf, 0x81); // sub SP,#framesize
603 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
604 emit_d32(cbuf, framesize);
605 }
606 C->set_frame_complete(cbuf.insts_size());
608 #ifdef ASSERT
609 if (VerifyStackAtCalls) {
610 Label L;
611 MacroAssembler masm(&cbuf);
612 masm.push(rax);
613 masm.mov(rax, rsp);
614 masm.andptr(rax, StackAlignmentInBytes-1);
615 masm.cmpptr(rax, StackAlignmentInBytes-wordSize);
616 masm.pop(rax);
617 masm.jcc(Assembler::equal, L);
618 masm.stop("Stack is not properly aligned!");
619 masm.bind(L);
620 }
621 #endif
623 }
625 uint MachPrologNode::size(PhaseRegAlloc *ra_) const {
626 return MachNode::size(ra_); // too many variables; just compute it the hard way
627 }
629 int MachPrologNode::reloc() const {
630 return 0; // a large enough number
631 }
633 //=============================================================================
634 #ifndef PRODUCT
635 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
636 Compile *C = ra_->C;
637 int framesize = C->frame_slots() << LogBytesPerInt;
638 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
639 // Remove two words for return addr and rbp,
640 framesize -= 2*wordSize;
642 if( C->in_24_bit_fp_mode() ) {
643 st->print("FLDCW standard control word");
644 st->cr(); st->print("\t");
645 }
646 if( framesize ) {
647 st->print("ADD ESP,%d\t# Destroy frame",framesize);
648 st->cr(); st->print("\t");
649 }
650 st->print_cr("POPL EBP"); st->print("\t");
651 if( do_polling() && C->is_method_compilation() ) {
652 st->print("TEST PollPage,EAX\t! Poll Safepoint");
653 st->cr(); st->print("\t");
654 }
655 }
656 #endif
658 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
659 Compile *C = ra_->C;
661 // If method set FPU control word, restore to standard control word
662 if( C->in_24_bit_fp_mode() ) {
663 MacroAssembler masm(&cbuf);
664 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
665 }
667 int framesize = C->frame_slots() << LogBytesPerInt;
668 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
669 // Remove two words for return addr and rbp,
670 framesize -= 2*wordSize;
672 // Note that VerifyStackAtCalls' Majik cookie does not change the frame size popped here
674 if( framesize >= 128 ) {
675 emit_opcode(cbuf, 0x81); // add SP, #framesize
676 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
677 emit_d32(cbuf, framesize);
678 }
679 else if( framesize ) {
680 emit_opcode(cbuf, 0x83); // add SP, #framesize
681 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
682 emit_d8(cbuf, framesize);
683 }
685 emit_opcode(cbuf, 0x58 | EBP_enc);
687 if( do_polling() && C->is_method_compilation() ) {
688 cbuf.relocate(cbuf.insts_end(), relocInfo::poll_return_type, 0);
689 emit_opcode(cbuf,0x85);
690 emit_rm(cbuf, 0x0, EAX_enc, 0x5); // EAX
691 emit_d32(cbuf, (intptr_t)os::get_polling_page());
692 }
693 }
695 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const {
696 Compile *C = ra_->C;
697 // If method set FPU control word, restore to standard control word
698 int size = C->in_24_bit_fp_mode() ? 6 : 0;
699 if( do_polling() && C->is_method_compilation() ) size += 6;
701 int framesize = C->frame_slots() << LogBytesPerInt;
702 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
703 // Remove two words for return addr and rbp,
704 framesize -= 2*wordSize;
706 size++; // popl rbp,
708 if( framesize >= 128 ) {
709 size += 6;
710 } else {
711 size += framesize ? 3 : 0;
712 }
713 return size;
714 }
716 int MachEpilogNode::reloc() const {
717 return 0; // a large enough number
718 }
720 const Pipeline * MachEpilogNode::pipeline() const {
721 return MachNode::pipeline_class();
722 }
724 int MachEpilogNode::safepoint_offset() const { return 0; }
726 //=============================================================================
728 enum RC { rc_bad, rc_int, rc_float, rc_xmm, rc_stack };
729 static enum RC rc_class( OptoReg::Name reg ) {
731 if( !OptoReg::is_valid(reg) ) return rc_bad;
732 if (OptoReg::is_stack(reg)) return rc_stack;
734 VMReg r = OptoReg::as_VMReg(reg);
735 if (r->is_Register()) return rc_int;
736 if (r->is_FloatRegister()) {
737 assert(UseSSE < 2, "shouldn't be used in SSE2+ mode");
738 return rc_float;
739 }
740 assert(r->is_XMMRegister(), "must be");
741 return rc_xmm;
742 }
744 static int impl_helper( CodeBuffer *cbuf, bool do_size, bool is_load, int offset, int reg,
745 int opcode, const char *op_str, int size, outputStream* st ) {
746 if( cbuf ) {
747 emit_opcode (*cbuf, opcode );
748 encode_RegMem(*cbuf, Matcher::_regEncode[reg], ESP_enc, 0x4, 0, offset, false);
749 #ifndef PRODUCT
750 } else if( !do_size ) {
751 if( size != 0 ) st->print("\n\t");
752 if( opcode == 0x8B || opcode == 0x89 ) { // MOV
753 if( is_load ) st->print("%s %s,[ESP + #%d]",op_str,Matcher::regName[reg],offset);
754 else st->print("%s [ESP + #%d],%s",op_str,offset,Matcher::regName[reg]);
755 } else { // FLD, FST, PUSH, POP
756 st->print("%s [ESP + #%d]",op_str,offset);
757 }
758 #endif
759 }
760 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
761 return size+3+offset_size;
762 }
764 // Helper for XMM registers. Extra opcode bits, limited syntax.
765 static int impl_x_helper( CodeBuffer *cbuf, bool do_size, bool is_load,
766 int offset, int reg_lo, int reg_hi, int size, outputStream* st ) {
767 if( cbuf ) {
768 if( reg_lo+1 == reg_hi ) { // double move?
769 if( is_load && !UseXmmLoadAndClearUpper )
770 emit_opcode(*cbuf, 0x66 ); // use 'movlpd' for load
771 else
772 emit_opcode(*cbuf, 0xF2 ); // use 'movsd' otherwise
773 } else {
774 emit_opcode(*cbuf, 0xF3 );
775 }
776 emit_opcode(*cbuf, 0x0F );
777 if( reg_lo+1 == reg_hi && is_load && !UseXmmLoadAndClearUpper )
778 emit_opcode(*cbuf, 0x12 ); // use 'movlpd' for load
779 else
780 emit_opcode(*cbuf, is_load ? 0x10 : 0x11 );
781 encode_RegMem(*cbuf, Matcher::_regEncode[reg_lo], ESP_enc, 0x4, 0, offset, false);
782 #ifndef PRODUCT
783 } else if( !do_size ) {
784 if( size != 0 ) st->print("\n\t");
785 if( reg_lo+1 == reg_hi ) { // double move?
786 if( is_load ) st->print("%s %s,[ESP + #%d]",
787 UseXmmLoadAndClearUpper ? "MOVSD " : "MOVLPD",
788 Matcher::regName[reg_lo], offset);
789 else st->print("MOVSD [ESP + #%d],%s",
790 offset, Matcher::regName[reg_lo]);
791 } else {
792 if( is_load ) st->print("MOVSS %s,[ESP + #%d]",
793 Matcher::regName[reg_lo], offset);
794 else st->print("MOVSS [ESP + #%d],%s",
795 offset, Matcher::regName[reg_lo]);
796 }
797 #endif
798 }
799 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
800 return size+5+offset_size;
801 }
804 static int impl_movx_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
805 int src_hi, int dst_hi, int size, outputStream* st ) {
806 if( UseXmmRegToRegMoveAll ) {//Use movaps,movapd to move between xmm registers
807 if( cbuf ) {
808 if( (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ) {
809 emit_opcode(*cbuf, 0x66 );
810 }
811 emit_opcode(*cbuf, 0x0F );
812 emit_opcode(*cbuf, 0x28 );
813 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
814 #ifndef PRODUCT
815 } else if( !do_size ) {
816 if( size != 0 ) st->print("\n\t");
817 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
818 st->print("MOVAPD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
819 } else {
820 st->print("MOVAPS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
821 }
822 #endif
823 }
824 return size + ((src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 4 : 3);
825 } else {
826 if( cbuf ) {
827 emit_opcode(*cbuf, (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 0xF2 : 0xF3 );
828 emit_opcode(*cbuf, 0x0F );
829 emit_opcode(*cbuf, 0x10 );
830 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
831 #ifndef PRODUCT
832 } else if( !do_size ) {
833 if( size != 0 ) st->print("\n\t");
834 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
835 st->print("MOVSD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
836 } else {
837 st->print("MOVSS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
838 }
839 #endif
840 }
841 return size+4;
842 }
843 }
845 static int impl_movgpr2x_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
846 int src_hi, int dst_hi, int size, outputStream* st ) {
847 // 32-bit
848 if (cbuf) {
849 emit_opcode(*cbuf, 0x66);
850 emit_opcode(*cbuf, 0x0F);
851 emit_opcode(*cbuf, 0x6E);
852 emit_rm(*cbuf, 0x3, Matcher::_regEncode[dst_lo] & 7, Matcher::_regEncode[src_lo] & 7);
853 #ifndef PRODUCT
854 } else if (!do_size) {
855 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
856 #endif
857 }
858 return 4;
859 }
862 static int impl_movx2gpr_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
863 int src_hi, int dst_hi, int size, outputStream* st ) {
864 // 32-bit
865 if (cbuf) {
866 emit_opcode(*cbuf, 0x66);
867 emit_opcode(*cbuf, 0x0F);
868 emit_opcode(*cbuf, 0x7E);
869 emit_rm(*cbuf, 0x3, Matcher::_regEncode[src_lo] & 7, Matcher::_regEncode[dst_lo] & 7);
870 #ifndef PRODUCT
871 } else if (!do_size) {
872 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
873 #endif
874 }
875 return 4;
876 }
878 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int size, outputStream* st ) {
879 if( cbuf ) {
880 emit_opcode(*cbuf, 0x8B );
881 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst], Matcher::_regEncode[src] );
882 #ifndef PRODUCT
883 } else if( !do_size ) {
884 if( size != 0 ) st->print("\n\t");
885 st->print("MOV %s,%s",Matcher::regName[dst],Matcher::regName[src]);
886 #endif
887 }
888 return size+2;
889 }
891 static int impl_fp_store_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int src_hi, int dst_lo, int dst_hi,
892 int offset, int size, outputStream* st ) {
893 if( src_lo != FPR1L_num ) { // Move value to top of FP stack, if not already there
894 if( cbuf ) {
895 emit_opcode( *cbuf, 0xD9 ); // FLD (i.e., push it)
896 emit_d8( *cbuf, 0xC0-1+Matcher::_regEncode[src_lo] );
897 #ifndef PRODUCT
898 } else if( !do_size ) {
899 if( size != 0 ) st->print("\n\t");
900 st->print("FLD %s",Matcher::regName[src_lo]);
901 #endif
902 }
903 size += 2;
904 }
906 int st_op = (src_lo != FPR1L_num) ? EBX_num /*store & pop*/ : EDX_num /*store no pop*/;
907 const char *op_str;
908 int op;
909 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double store?
910 op_str = (src_lo != FPR1L_num) ? "FSTP_D" : "FST_D ";
911 op = 0xDD;
912 } else { // 32-bit store
913 op_str = (src_lo != FPR1L_num) ? "FSTP_S" : "FST_S ";
914 op = 0xD9;
915 assert( !OptoReg::is_valid(src_hi) && !OptoReg::is_valid(dst_hi), "no non-adjacent float-stores" );
916 }
918 return impl_helper(cbuf,do_size,false,offset,st_op,op,op_str,size, st);
919 }
921 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, outputStream* st ) const {
922 // Get registers to move
923 OptoReg::Name src_second = ra_->get_reg_second(in(1));
924 OptoReg::Name src_first = ra_->get_reg_first(in(1));
925 OptoReg::Name dst_second = ra_->get_reg_second(this );
926 OptoReg::Name dst_first = ra_->get_reg_first(this );
928 enum RC src_second_rc = rc_class(src_second);
929 enum RC src_first_rc = rc_class(src_first);
930 enum RC dst_second_rc = rc_class(dst_second);
931 enum RC dst_first_rc = rc_class(dst_first);
933 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" );
935 // Generate spill code!
936 int size = 0;
938 if( src_first == dst_first && src_second == dst_second )
939 return size; // Self copy, no move
941 // --------------------------------------
942 // Check for mem-mem move. push/pop to move.
943 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
944 if( src_second == dst_first ) { // overlapping stack copy ranges
945 assert( src_second_rc == rc_stack && dst_second_rc == rc_stack, "we only expect a stk-stk copy here" );
946 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
947 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
948 src_second_rc = dst_second_rc = rc_bad; // flag as already moved the second bits
949 }
950 // move low bits
951 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),ESI_num,0xFF,"PUSH ",size, st);
952 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),EAX_num,0x8F,"POP ",size, st);
953 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { // mov second bits
954 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
955 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
956 }
957 return size;
958 }
960 // --------------------------------------
961 // Check for integer reg-reg copy
962 if( src_first_rc == rc_int && dst_first_rc == rc_int )
963 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,size, st);
965 // Check for integer store
966 if( src_first_rc == rc_int && dst_first_rc == rc_stack )
967 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first,0x89,"MOV ",size, st);
969 // Check for integer load
970 if( dst_first_rc == rc_int && src_first_rc == rc_stack )
971 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first,0x8B,"MOV ",size, st);
973 // Check for integer reg-xmm reg copy
974 if( src_first_rc == rc_int && dst_first_rc == rc_xmm ) {
975 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
976 "no 64 bit integer-float reg moves" );
977 return impl_movgpr2x_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
978 }
979 // --------------------------------------
980 // Check for float reg-reg copy
981 if( src_first_rc == rc_float && dst_first_rc == rc_float ) {
982 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
983 (src_first+1 == src_second && dst_first+1 == dst_second), "no non-adjacent float-moves" );
984 if( cbuf ) {
986 // Note the mucking with the register encode to compensate for the 0/1
987 // indexing issue mentioned in a comment in the reg_def sections
988 // for FPR registers many lines above here.
990 if( src_first != FPR1L_num ) {
991 emit_opcode (*cbuf, 0xD9 ); // FLD ST(i)
992 emit_d8 (*cbuf, 0xC0+Matcher::_regEncode[src_first]-1 );
993 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
994 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
995 } else {
996 emit_opcode (*cbuf, 0xDD ); // FST ST(i)
997 emit_d8 (*cbuf, 0xD0+Matcher::_regEncode[dst_first]-1 );
998 }
999 #ifndef PRODUCT
1000 } else if( !do_size ) {
1001 if( size != 0 ) st->print("\n\t");
1002 if( src_first != FPR1L_num ) st->print("FLD %s\n\tFSTP %s",Matcher::regName[src_first],Matcher::regName[dst_first]);
1003 else st->print( "FST %s", Matcher::regName[dst_first]);
1004 #endif
1005 }
1006 return size + ((src_first != FPR1L_num) ? 2+2 : 2);
1007 }
1009 // Check for float store
1010 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) {
1011 return impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,ra_->reg2offset(dst_first),size, st);
1012 }
1014 // Check for float load
1015 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) {
1016 int offset = ra_->reg2offset(src_first);
1017 const char *op_str;
1018 int op;
1019 if( src_first+1 == src_second && dst_first+1 == dst_second ) { // double load?
1020 op_str = "FLD_D";
1021 op = 0xDD;
1022 } else { // 32-bit load
1023 op_str = "FLD_S";
1024 op = 0xD9;
1025 assert( src_second_rc == rc_bad && dst_second_rc == rc_bad, "no non-adjacent float-loads" );
1026 }
1027 if( cbuf ) {
1028 emit_opcode (*cbuf, op );
1029 encode_RegMem(*cbuf, 0x0, ESP_enc, 0x4, 0, offset, false);
1030 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1031 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1032 #ifndef PRODUCT
1033 } else if( !do_size ) {
1034 if( size != 0 ) st->print("\n\t");
1035 st->print("%s ST,[ESP + #%d]\n\tFSTP %s",op_str, offset,Matcher::regName[dst_first]);
1036 #endif
1037 }
1038 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
1039 return size + 3+offset_size+2;
1040 }
1042 // Check for xmm reg-reg copy
1043 if( src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1044 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1045 (src_first+1 == src_second && dst_first+1 == dst_second),
1046 "no non-adjacent float-moves" );
1047 return impl_movx_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1048 }
1050 // Check for xmm reg-integer reg copy
1051 if( src_first_rc == rc_xmm && dst_first_rc == rc_int ) {
1052 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1053 "no 64 bit float-integer reg moves" );
1054 return impl_movx2gpr_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1055 }
1057 // Check for xmm store
1058 if( src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1059 return impl_x_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first, src_second, size, st);
1060 }
1062 // Check for float xmm load
1063 if( dst_first_rc == rc_xmm && src_first_rc == rc_stack ) {
1064 return impl_x_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first, dst_second, size, st);
1065 }
1067 // Copy from float reg to xmm reg
1068 if( dst_first_rc == rc_xmm && src_first_rc == rc_float ) {
1069 // copy to the top of stack from floating point reg
1070 // and use LEA to preserve flags
1071 if( cbuf ) {
1072 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP-8]
1073 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1074 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1075 emit_d8(*cbuf,0xF8);
1076 #ifndef PRODUCT
1077 } else if( !do_size ) {
1078 if( size != 0 ) st->print("\n\t");
1079 st->print("LEA ESP,[ESP-8]");
1080 #endif
1081 }
1082 size += 4;
1084 size = impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,0,size, st);
1086 // Copy from the temp memory to the xmm reg.
1087 size = impl_x_helper(cbuf,do_size,true ,0,dst_first, dst_second, size, st);
1089 if( cbuf ) {
1090 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP+8]
1091 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1092 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1093 emit_d8(*cbuf,0x08);
1094 #ifndef PRODUCT
1095 } else if( !do_size ) {
1096 if( size != 0 ) st->print("\n\t");
1097 st->print("LEA ESP,[ESP+8]");
1098 #endif
1099 }
1100 size += 4;
1101 return size;
1102 }
1104 assert( size > 0, "missed a case" );
1106 // --------------------------------------------------------------------
1107 // Check for second bits still needing moving.
1108 if( src_second == dst_second )
1109 return size; // Self copy; no move
1110 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" );
1112 // Check for second word int-int move
1113 if( src_second_rc == rc_int && dst_second_rc == rc_int )
1114 return impl_mov_helper(cbuf,do_size,src_second,dst_second,size, st);
1116 // Check for second word integer store
1117 if( src_second_rc == rc_int && dst_second_rc == rc_stack )
1118 return impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),src_second,0x89,"MOV ",size, st);
1120 // Check for second word integer load
1121 if( dst_second_rc == rc_int && src_second_rc == rc_stack )
1122 return impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),dst_second,0x8B,"MOV ",size, st);
1125 Unimplemented();
1126 }
1128 #ifndef PRODUCT
1129 void MachSpillCopyNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1130 implementation( NULL, ra_, false, st );
1131 }
1132 #endif
1134 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1135 implementation( &cbuf, ra_, false, NULL );
1136 }
1138 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const {
1139 return implementation( NULL, ra_, true, NULL );
1140 }
1142 //=============================================================================
1143 #ifndef PRODUCT
1144 void MachNopNode::format( PhaseRegAlloc *, outputStream* st ) const {
1145 st->print("NOP \t# %d bytes pad for loops and calls", _count);
1146 }
1147 #endif
1149 void MachNopNode::emit(CodeBuffer &cbuf, PhaseRegAlloc * ) const {
1150 MacroAssembler _masm(&cbuf);
1151 __ nop(_count);
1152 }
1154 uint MachNopNode::size(PhaseRegAlloc *) const {
1155 return _count;
1156 }
1159 //=============================================================================
1160 #ifndef PRODUCT
1161 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1162 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1163 int reg = ra_->get_reg_first(this);
1164 st->print("LEA %s,[ESP + #%d]",Matcher::regName[reg],offset);
1165 }
1166 #endif
1168 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1169 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1170 int reg = ra_->get_encode(this);
1171 if( offset >= 128 ) {
1172 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1173 emit_rm(cbuf, 0x2, reg, 0x04);
1174 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1175 emit_d32(cbuf, offset);
1176 }
1177 else {
1178 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1179 emit_rm(cbuf, 0x1, reg, 0x04);
1180 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1181 emit_d8(cbuf, offset);
1182 }
1183 }
1185 uint BoxLockNode::size(PhaseRegAlloc *ra_) const {
1186 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1187 if( offset >= 128 ) {
1188 return 7;
1189 }
1190 else {
1191 return 4;
1192 }
1193 }
1195 //=============================================================================
1197 // emit call stub, compiled java to interpreter
1198 void emit_java_to_interp(CodeBuffer &cbuf ) {
1199 // Stub is fixed up when the corresponding call is converted from calling
1200 // compiled code to calling interpreted code.
1201 // mov rbx,0
1202 // jmp -1
1204 address mark = cbuf.insts_mark(); // get mark within main instrs section
1206 // Note that the code buffer's insts_mark is always relative to insts.
1207 // That's why we must use the macroassembler to generate a stub.
1208 MacroAssembler _masm(&cbuf);
1210 address base =
1211 __ start_a_stub(Compile::MAX_stubs_size);
1212 if (base == NULL) return; // CodeBuffer::expand failed
1213 // static stub relocation stores the instruction address of the call
1214 __ relocate(static_stub_Relocation::spec(mark), RELOC_IMM32);
1215 // static stub relocation also tags the methodOop in the code-stream.
1216 __ movoop(rbx, (jobject)NULL); // method is zapped till fixup time
1217 // This is recognized as unresolved by relocs/nativeInst/ic code
1218 __ jump(RuntimeAddress(__ pc()));
1220 __ end_a_stub();
1221 // Update current stubs pointer and restore insts_end.
1222 }
1223 // size of call stub, compiled java to interpretor
1224 uint size_java_to_interp() {
1225 return 10; // movl; jmp
1226 }
1227 // relocation entries for call stub, compiled java to interpretor
1228 uint reloc_java_to_interp() {
1229 return 4; // 3 in emit_java_to_interp + 1 in Java_Static_Call
1230 }
1232 //=============================================================================
1233 #ifndef PRODUCT
1234 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1235 st->print_cr( "CMP EAX,[ECX+4]\t# Inline cache check");
1236 st->print_cr("\tJNE SharedRuntime::handle_ic_miss_stub");
1237 st->print_cr("\tNOP");
1238 st->print_cr("\tNOP");
1239 if( !OptoBreakpoint )
1240 st->print_cr("\tNOP");
1241 }
1242 #endif
1244 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1245 MacroAssembler masm(&cbuf);
1246 #ifdef ASSERT
1247 uint insts_size = cbuf.insts_size();
1248 #endif
1249 masm.cmpptr(rax, Address(rcx, oopDesc::klass_offset_in_bytes()));
1250 masm.jump_cc(Assembler::notEqual,
1251 RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1252 /* WARNING these NOPs are critical so that verified entry point is properly
1253 aligned for patching by NativeJump::patch_verified_entry() */
1254 int nops_cnt = 2;
1255 if( !OptoBreakpoint ) // Leave space for int3
1256 nops_cnt += 1;
1257 masm.nop(nops_cnt);
1259 assert(cbuf.insts_size() - insts_size == size(ra_), "checking code size of inline cache node");
1260 }
1262 uint MachUEPNode::size(PhaseRegAlloc *ra_) const {
1263 return OptoBreakpoint ? 11 : 12;
1264 }
1267 //=============================================================================
1268 uint size_exception_handler() {
1269 // NativeCall instruction size is the same as NativeJump.
1270 // exception handler starts out as jump and can be patched to
1271 // a call be deoptimization. (4932387)
1272 // Note that this value is also credited (in output.cpp) to
1273 // the size of the code section.
1274 return NativeJump::instruction_size;
1275 }
1277 // Emit exception handler code. Stuff framesize into a register
1278 // and call a VM stub routine.
1279 int emit_exception_handler(CodeBuffer& cbuf) {
1281 // Note that the code buffer's insts_mark is always relative to insts.
1282 // That's why we must use the macroassembler to generate a handler.
1283 MacroAssembler _masm(&cbuf);
1284 address base =
1285 __ start_a_stub(size_exception_handler());
1286 if (base == NULL) return 0; // CodeBuffer::expand failed
1287 int offset = __ offset();
1288 __ jump(RuntimeAddress(OptoRuntime::exception_blob()->entry_point()));
1289 assert(__ offset() - offset <= (int) size_exception_handler(), "overflow");
1290 __ end_a_stub();
1291 return offset;
1292 }
1294 uint size_deopt_handler() {
1295 // NativeCall instruction size is the same as NativeJump.
1296 // exception handler starts out as jump and can be patched to
1297 // a call be deoptimization. (4932387)
1298 // Note that this value is also credited (in output.cpp) to
1299 // the size of the code section.
1300 return 5 + NativeJump::instruction_size; // pushl(); jmp;
1301 }
1303 // Emit deopt handler code.
1304 int emit_deopt_handler(CodeBuffer& cbuf) {
1306 // Note that the code buffer's insts_mark is always relative to insts.
1307 // That's why we must use the macroassembler to generate a handler.
1308 MacroAssembler _masm(&cbuf);
1309 address base =
1310 __ start_a_stub(size_exception_handler());
1311 if (base == NULL) return 0; // CodeBuffer::expand failed
1312 int offset = __ offset();
1313 InternalAddress here(__ pc());
1314 __ pushptr(here.addr());
1316 __ jump(RuntimeAddress(SharedRuntime::deopt_blob()->unpack()));
1317 assert(__ offset() - offset <= (int) size_deopt_handler(), "overflow");
1318 __ end_a_stub();
1319 return offset;
1320 }
1323 static void emit_double_constant(CodeBuffer& cbuf, double x) {
1324 int mark = cbuf.insts()->mark_off();
1325 MacroAssembler _masm(&cbuf);
1326 address double_address = __ double_constant(x);
1327 cbuf.insts()->set_mark_off(mark); // preserve mark across masm shift
1328 emit_d32_reloc(cbuf,
1329 (int)double_address,
1330 internal_word_Relocation::spec(double_address),
1331 RELOC_DISP32);
1332 }
1334 static void emit_float_constant(CodeBuffer& cbuf, float x) {
1335 int mark = cbuf.insts()->mark_off();
1336 MacroAssembler _masm(&cbuf);
1337 address float_address = __ float_constant(x);
1338 cbuf.insts()->set_mark_off(mark); // preserve mark across masm shift
1339 emit_d32_reloc(cbuf,
1340 (int)float_address,
1341 internal_word_Relocation::spec(float_address),
1342 RELOC_DISP32);
1343 }
1346 const bool Matcher::match_rule_supported(int opcode) {
1347 if (!has_match_rule(opcode))
1348 return false;
1350 return true; // Per default match rules are supported.
1351 }
1353 int Matcher::regnum_to_fpu_offset(int regnum) {
1354 return regnum - 32; // The FP registers are in the second chunk
1355 }
1357 bool is_positive_zero_float(jfloat f) {
1358 return jint_cast(f) == jint_cast(0.0F);
1359 }
1361 bool is_positive_one_float(jfloat f) {
1362 return jint_cast(f) == jint_cast(1.0F);
1363 }
1365 bool is_positive_zero_double(jdouble d) {
1366 return jlong_cast(d) == jlong_cast(0.0);
1367 }
1369 bool is_positive_one_double(jdouble d) {
1370 return jlong_cast(d) == jlong_cast(1.0);
1371 }
1373 // This is UltraSparc specific, true just means we have fast l2f conversion
1374 const bool Matcher::convL2FSupported(void) {
1375 return true;
1376 }
1378 // Vector width in bytes
1379 const uint Matcher::vector_width_in_bytes(void) {
1380 return UseSSE >= 2 ? 8 : 0;
1381 }
1383 // Vector ideal reg
1384 const uint Matcher::vector_ideal_reg(void) {
1385 return Op_RegD;
1386 }
1388 // Is this branch offset short enough that a short branch can be used?
1389 //
1390 // NOTE: If the platform does not provide any short branch variants, then
1391 // this method should return false for offset 0.
1392 bool Matcher::is_short_branch_offset(int rule, int offset) {
1393 // the short version of jmpConUCF2 contains multiple branches,
1394 // making the reach slightly less
1395 if (rule == jmpConUCF2_rule)
1396 return (-126 <= offset && offset <= 125);
1397 return (-128 <= offset && offset <= 127);
1398 }
1400 const bool Matcher::isSimpleConstant64(jlong value) {
1401 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?.
1402 return false;
1403 }
1405 // The ecx parameter to rep stos for the ClearArray node is in dwords.
1406 const bool Matcher::init_array_count_is_in_bytes = false;
1408 // Threshold size for cleararray.
1409 const int Matcher::init_array_short_size = 8 * BytesPerLong;
1411 // Should the Matcher clone shifts on addressing modes, expecting them to
1412 // be subsumed into complex addressing expressions or compute them into
1413 // registers? True for Intel but false for most RISCs
1414 const bool Matcher::clone_shift_expressions = true;
1416 bool Matcher::narrow_oop_use_complex_address() {
1417 ShouldNotCallThis();
1418 return true;
1419 }
1422 // Is it better to copy float constants, or load them directly from memory?
1423 // Intel can load a float constant from a direct address, requiring no
1424 // extra registers. Most RISCs will have to materialize an address into a
1425 // register first, so they would do better to copy the constant from stack.
1426 const bool Matcher::rematerialize_float_constants = true;
1428 // If CPU can load and store mis-aligned doubles directly then no fixup is
1429 // needed. Else we split the double into 2 integer pieces and move it
1430 // piece-by-piece. Only happens when passing doubles into C code as the
1431 // Java calling convention forces doubles to be aligned.
1432 const bool Matcher::misaligned_doubles_ok = true;
1435 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) {
1436 // Get the memory operand from the node
1437 uint numopnds = node->num_opnds(); // Virtual call for number of operands
1438 uint skipped = node->oper_input_base(); // Sum of leaves skipped so far
1439 assert( idx >= skipped, "idx too low in pd_implicit_null_fixup" );
1440 uint opcnt = 1; // First operand
1441 uint num_edges = node->_opnds[1]->num_edges(); // leaves for first operand
1442 while( idx >= skipped+num_edges ) {
1443 skipped += num_edges;
1444 opcnt++; // Bump operand count
1445 assert( opcnt < numopnds, "Accessing non-existent operand" );
1446 num_edges = node->_opnds[opcnt]->num_edges(); // leaves for next operand
1447 }
1449 MachOper *memory = node->_opnds[opcnt];
1450 MachOper *new_memory = NULL;
1451 switch (memory->opcode()) {
1452 case DIRECT:
1453 case INDOFFSET32X:
1454 // No transformation necessary.
1455 return;
1456 case INDIRECT:
1457 new_memory = new (C) indirect_win95_safeOper( );
1458 break;
1459 case INDOFFSET8:
1460 new_memory = new (C) indOffset8_win95_safeOper(memory->disp(NULL, NULL, 0));
1461 break;
1462 case INDOFFSET32:
1463 new_memory = new (C) indOffset32_win95_safeOper(memory->disp(NULL, NULL, 0));
1464 break;
1465 case INDINDEXOFFSET:
1466 new_memory = new (C) indIndexOffset_win95_safeOper(memory->disp(NULL, NULL, 0));
1467 break;
1468 case INDINDEXSCALE:
1469 new_memory = new (C) indIndexScale_win95_safeOper(memory->scale());
1470 break;
1471 case INDINDEXSCALEOFFSET:
1472 new_memory = new (C) indIndexScaleOffset_win95_safeOper(memory->scale(), memory->disp(NULL, NULL, 0));
1473 break;
1474 case LOAD_LONG_INDIRECT:
1475 case LOAD_LONG_INDOFFSET32:
1476 // Does not use EBP as address register, use { EDX, EBX, EDI, ESI}
1477 return;
1478 default:
1479 assert(false, "unexpected memory operand in pd_implicit_null_fixup()");
1480 return;
1481 }
1482 node->_opnds[opcnt] = new_memory;
1483 }
1485 // Advertise here if the CPU requires explicit rounding operations
1486 // to implement the UseStrictFP mode.
1487 const bool Matcher::strict_fp_requires_explicit_rounding = true;
1489 // Are floats conerted to double when stored to stack during deoptimization?
1490 // On x32 it is stored with convertion only when FPU is used for floats.
1491 bool Matcher::float_in_double() { return (UseSSE == 0); }
1493 // Do ints take an entire long register or just half?
1494 const bool Matcher::int_in_long = false;
1496 // Return whether or not this register is ever used as an argument. This
1497 // function is used on startup to build the trampoline stubs in generateOptoStub.
1498 // Registers not mentioned will be killed by the VM call in the trampoline, and
1499 // arguments in those registers not be available to the callee.
1500 bool Matcher::can_be_java_arg( int reg ) {
1501 if( reg == ECX_num || reg == EDX_num ) return true;
1502 if( (reg == XMM0a_num || reg == XMM1a_num) && UseSSE>=1 ) return true;
1503 if( (reg == XMM0b_num || reg == XMM1b_num) && UseSSE>=2 ) return true;
1504 return false;
1505 }
1507 bool Matcher::is_spillable_arg( int reg ) {
1508 return can_be_java_arg(reg);
1509 }
1511 bool Matcher::use_asm_for_ldiv_by_con( jlong divisor ) {
1512 // Use hardware integer DIV instruction when
1513 // it is faster than a code which use multiply.
1514 // Only when constant divisor fits into 32 bit
1515 // (min_jint is excluded to get only correct
1516 // positive 32 bit values from negative).
1517 return VM_Version::has_fast_idiv() &&
1518 (divisor == (int)divisor && divisor != min_jint);
1519 }
1521 // Register for DIVI projection of divmodI
1522 RegMask Matcher::divI_proj_mask() {
1523 return EAX_REG_mask;
1524 }
1526 // Register for MODI projection of divmodI
1527 RegMask Matcher::modI_proj_mask() {
1528 return EDX_REG_mask;
1529 }
1531 // Register for DIVL projection of divmodL
1532 RegMask Matcher::divL_proj_mask() {
1533 ShouldNotReachHere();
1534 return RegMask();
1535 }
1537 // Register for MODL projection of divmodL
1538 RegMask Matcher::modL_proj_mask() {
1539 ShouldNotReachHere();
1540 return RegMask();
1541 }
1543 const RegMask Matcher::method_handle_invoke_SP_save_mask() {
1544 return EBP_REG_mask;
1545 }
1547 // Returns true if the high 32 bits of the value is known to be zero.
1548 bool is_operand_hi32_zero(Node* n) {
1549 int opc = n->Opcode();
1550 if (opc == Op_LoadUI2L) {
1551 return true;
1552 }
1553 if (opc == Op_AndL) {
1554 Node* o2 = n->in(2);
1555 if (o2->is_Con() && (o2->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1556 return true;
1557 }
1558 }
1559 if (opc == Op_ConL && (n->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1560 return true;
1561 }
1562 return false;
1563 }
1565 %}
1567 //----------ENCODING BLOCK-----------------------------------------------------
1568 // This block specifies the encoding classes used by the compiler to output
1569 // byte streams. Encoding classes generate functions which are called by
1570 // Machine Instruction Nodes in order to generate the bit encoding of the
1571 // instruction. Operands specify their base encoding interface with the
1572 // interface keyword. There are currently supported four interfaces,
1573 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an
1574 // operand to generate a function which returns its register number when
1575 // queried. CONST_INTER causes an operand to generate a function which
1576 // returns the value of the constant when queried. MEMORY_INTER causes an
1577 // operand to generate four functions which return the Base Register, the
1578 // Index Register, the Scale Value, and the Offset Value of the operand when
1579 // queried. COND_INTER causes an operand to generate six functions which
1580 // return the encoding code (ie - encoding bits for the instruction)
1581 // associated with each basic boolean condition for a conditional instruction.
1582 // Instructions specify two basic values for encoding. They use the
1583 // ins_encode keyword to specify their encoding class (which must be one of
1584 // the class names specified in the encoding block), and they use the
1585 // opcode keyword to specify, in order, their primary, secondary, and
1586 // tertiary opcode. Only the opcode sections which a particular instruction
1587 // needs for encoding need to be specified.
1588 encode %{
1589 // Build emit functions for each basic byte or larger field in the intel
1590 // encoding scheme (opcode, rm, sib, immediate), and call them from C++
1591 // code in the enc_class source block. Emit functions will live in the
1592 // main source block for now. In future, we can generalize this by
1593 // adding a syntax that specifies the sizes of fields in an order,
1594 // so that the adlc can build the emit functions automagically
1596 // Emit primary opcode
1597 enc_class OpcP %{
1598 emit_opcode(cbuf, $primary);
1599 %}
1601 // Emit secondary opcode
1602 enc_class OpcS %{
1603 emit_opcode(cbuf, $secondary);
1604 %}
1606 // Emit opcode directly
1607 enc_class Opcode(immI d8) %{
1608 emit_opcode(cbuf, $d8$$constant);
1609 %}
1611 enc_class SizePrefix %{
1612 emit_opcode(cbuf,0x66);
1613 %}
1615 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
1616 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1617 %}
1619 enc_class OpcRegReg (immI opcode, eRegI dst, eRegI src) %{ // OpcRegReg(Many)
1620 emit_opcode(cbuf,$opcode$$constant);
1621 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1622 %}
1624 enc_class mov_r32_imm0( eRegI dst ) %{
1625 emit_opcode( cbuf, 0xB8 + $dst$$reg ); // 0xB8+ rd -- MOV r32 ,imm32
1626 emit_d32 ( cbuf, 0x0 ); // imm32==0x0
1627 %}
1629 enc_class cdq_enc %{
1630 // Full implementation of Java idiv and irem; checks for
1631 // special case as described in JVM spec., p.243 & p.271.
1632 //
1633 // normal case special case
1634 //
1635 // input : rax,: dividend min_int
1636 // reg: divisor -1
1637 //
1638 // output: rax,: quotient (= rax, idiv reg) min_int
1639 // rdx: remainder (= rax, irem reg) 0
1640 //
1641 // Code sequnce:
1642 //
1643 // 81 F8 00 00 00 80 cmp rax,80000000h
1644 // 0F 85 0B 00 00 00 jne normal_case
1645 // 33 D2 xor rdx,edx
1646 // 83 F9 FF cmp rcx,0FFh
1647 // 0F 84 03 00 00 00 je done
1648 // normal_case:
1649 // 99 cdq
1650 // F7 F9 idiv rax,ecx
1651 // done:
1652 //
1653 emit_opcode(cbuf,0x81); emit_d8(cbuf,0xF8);
1654 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00);
1655 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x80); // cmp rax,80000000h
1656 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x85);
1657 emit_opcode(cbuf,0x0B); emit_d8(cbuf,0x00);
1658 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // jne normal_case
1659 emit_opcode(cbuf,0x33); emit_d8(cbuf,0xD2); // xor rdx,edx
1660 emit_opcode(cbuf,0x83); emit_d8(cbuf,0xF9); emit_d8(cbuf,0xFF); // cmp rcx,0FFh
1661 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x84);
1662 emit_opcode(cbuf,0x03); emit_d8(cbuf,0x00);
1663 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // je done
1664 // normal_case:
1665 emit_opcode(cbuf,0x99); // cdq
1666 // idiv (note: must be emitted by the user of this rule)
1667 // normal:
1668 %}
1670 // Dense encoding for older common ops
1671 enc_class Opc_plus(immI opcode, eRegI reg) %{
1672 emit_opcode(cbuf, $opcode$$constant + $reg$$reg);
1673 %}
1676 // Opcde enc_class for 8/32 bit immediate instructions with sign-extension
1677 enc_class OpcSE (immI imm) %{ // Emit primary opcode and set sign-extend bit
1678 // Check for 8-bit immediate, and set sign extend bit in opcode
1679 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1680 emit_opcode(cbuf, $primary | 0x02);
1681 }
1682 else { // If 32-bit immediate
1683 emit_opcode(cbuf, $primary);
1684 }
1685 %}
1687 enc_class OpcSErm (eRegI dst, immI imm) %{ // OpcSEr/m
1688 // Emit primary opcode and set sign-extend bit
1689 // Check for 8-bit immediate, and set sign extend bit in opcode
1690 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1691 emit_opcode(cbuf, $primary | 0x02); }
1692 else { // If 32-bit immediate
1693 emit_opcode(cbuf, $primary);
1694 }
1695 // Emit r/m byte with secondary opcode, after primary opcode.
1696 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1697 %}
1699 enc_class Con8or32 (immI imm) %{ // Con8or32(storeImmI), 8 or 32 bits
1700 // Check for 8-bit immediate, and set sign extend bit in opcode
1701 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1702 $$$emit8$imm$$constant;
1703 }
1704 else { // If 32-bit immediate
1705 // Output immediate
1706 $$$emit32$imm$$constant;
1707 }
1708 %}
1710 enc_class Long_OpcSErm_Lo(eRegL dst, immL imm) %{
1711 // Emit primary opcode and set sign-extend bit
1712 // Check for 8-bit immediate, and set sign extend bit in opcode
1713 int con = (int)$imm$$constant; // Throw away top bits
1714 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1715 // Emit r/m byte with secondary opcode, after primary opcode.
1716 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1717 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1718 else emit_d32(cbuf,con);
1719 %}
1721 enc_class Long_OpcSErm_Hi(eRegL dst, immL imm) %{
1722 // Emit primary opcode and set sign-extend bit
1723 // Check for 8-bit immediate, and set sign extend bit in opcode
1724 int con = (int)($imm$$constant >> 32); // Throw away bottom bits
1725 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1726 // Emit r/m byte with tertiary opcode, after primary opcode.
1727 emit_rm(cbuf, 0x3, $tertiary, HIGH_FROM_LOW($dst$$reg));
1728 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1729 else emit_d32(cbuf,con);
1730 %}
1732 enc_class Lbl (label labl) %{ // JMP, CALL
1733 Label *l = $labl$$label;
1734 emit_d32(cbuf, l ? (l->loc_pos() - (cbuf.insts_size()+4)) : 0);
1735 %}
1737 enc_class LblShort (label labl) %{ // JMP, CALL
1738 Label *l = $labl$$label;
1739 int disp = l ? (l->loc_pos() - (cbuf.insts_size()+1)) : 0;
1740 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1741 emit_d8(cbuf, disp);
1742 %}
1744 enc_class OpcSReg (eRegI dst) %{ // BSWAP
1745 emit_cc(cbuf, $secondary, $dst$$reg );
1746 %}
1748 enc_class bswap_long_bytes(eRegL dst) %{ // BSWAP
1749 int destlo = $dst$$reg;
1750 int desthi = HIGH_FROM_LOW(destlo);
1751 // bswap lo
1752 emit_opcode(cbuf, 0x0F);
1753 emit_cc(cbuf, 0xC8, destlo);
1754 // bswap hi
1755 emit_opcode(cbuf, 0x0F);
1756 emit_cc(cbuf, 0xC8, desthi);
1757 // xchg lo and hi
1758 emit_opcode(cbuf, 0x87);
1759 emit_rm(cbuf, 0x3, destlo, desthi);
1760 %}
1762 enc_class RegOpc (eRegI div) %{ // IDIV, IMOD, JMP indirect, ...
1763 emit_rm(cbuf, 0x3, $secondary, $div$$reg );
1764 %}
1766 enc_class Jcc (cmpOp cop, label labl) %{ // JCC
1767 Label *l = $labl$$label;
1768 $$$emit8$primary;
1769 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1770 emit_d32(cbuf, l ? (l->loc_pos() - (cbuf.insts_size()+4)) : 0);
1771 %}
1773 enc_class JccShort (cmpOp cop, label labl) %{ // JCC
1774 Label *l = $labl$$label;
1775 emit_cc(cbuf, $primary, $cop$$cmpcode);
1776 int disp = l ? (l->loc_pos() - (cbuf.insts_size()+1)) : 0;
1777 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1778 emit_d8(cbuf, disp);
1779 %}
1781 enc_class enc_cmov(cmpOp cop ) %{ // CMOV
1782 $$$emit8$primary;
1783 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1784 %}
1786 enc_class enc_cmov_d(cmpOp cop, regD src ) %{ // CMOV
1787 int op = 0xDA00 + $cop$$cmpcode + ($src$$reg-1);
1788 emit_d8(cbuf, op >> 8 );
1789 emit_d8(cbuf, op & 255);
1790 %}
1792 // emulate a CMOV with a conditional branch around a MOV
1793 enc_class enc_cmov_branch( cmpOp cop, immI brOffs ) %{ // CMOV
1794 // Invert sense of branch from sense of CMOV
1795 emit_cc( cbuf, 0x70, ($cop$$cmpcode^1) );
1796 emit_d8( cbuf, $brOffs$$constant );
1797 %}
1799 enc_class enc_PartialSubtypeCheck( ) %{
1800 Register Redi = as_Register(EDI_enc); // result register
1801 Register Reax = as_Register(EAX_enc); // super class
1802 Register Recx = as_Register(ECX_enc); // killed
1803 Register Resi = as_Register(ESI_enc); // sub class
1804 Label miss;
1806 MacroAssembler _masm(&cbuf);
1807 __ check_klass_subtype_slow_path(Resi, Reax, Recx, Redi,
1808 NULL, &miss,
1809 /*set_cond_codes:*/ true);
1810 if ($primary) {
1811 __ xorptr(Redi, Redi);
1812 }
1813 __ bind(miss);
1814 %}
1816 enc_class FFree_Float_Stack_All %{ // Free_Float_Stack_All
1817 MacroAssembler masm(&cbuf);
1818 int start = masm.offset();
1819 if (UseSSE >= 2) {
1820 if (VerifyFPU) {
1821 masm.verify_FPU(0, "must be empty in SSE2+ mode");
1822 }
1823 } else {
1824 // External c_calling_convention expects the FPU stack to be 'clean'.
1825 // Compiled code leaves it dirty. Do cleanup now.
1826 masm.empty_FPU_stack();
1827 }
1828 if (sizeof_FFree_Float_Stack_All == -1) {
1829 sizeof_FFree_Float_Stack_All = masm.offset() - start;
1830 } else {
1831 assert(masm.offset() - start == sizeof_FFree_Float_Stack_All, "wrong size");
1832 }
1833 %}
1835 enc_class Verify_FPU_For_Leaf %{
1836 if( VerifyFPU ) {
1837 MacroAssembler masm(&cbuf);
1838 masm.verify_FPU( -3, "Returning from Runtime Leaf call");
1839 }
1840 %}
1842 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime, Java_To_Runtime_Leaf
1843 // This is the instruction starting address for relocation info.
1844 cbuf.set_insts_mark();
1845 $$$emit8$primary;
1846 // CALL directly to the runtime
1847 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1848 runtime_call_Relocation::spec(), RELOC_IMM32 );
1850 if (UseSSE >= 2) {
1851 MacroAssembler _masm(&cbuf);
1852 BasicType rt = tf()->return_type();
1854 if ((rt == T_FLOAT || rt == T_DOUBLE) && !return_value_is_used()) {
1855 // A C runtime call where the return value is unused. In SSE2+
1856 // mode the result needs to be removed from the FPU stack. It's
1857 // likely that this function call could be removed by the
1858 // optimizer if the C function is a pure function.
1859 __ ffree(0);
1860 } else if (rt == T_FLOAT) {
1861 __ lea(rsp, Address(rsp, -4));
1862 __ fstp_s(Address(rsp, 0));
1863 __ movflt(xmm0, Address(rsp, 0));
1864 __ lea(rsp, Address(rsp, 4));
1865 } else if (rt == T_DOUBLE) {
1866 __ lea(rsp, Address(rsp, -8));
1867 __ fstp_d(Address(rsp, 0));
1868 __ movdbl(xmm0, Address(rsp, 0));
1869 __ lea(rsp, Address(rsp, 8));
1870 }
1871 }
1872 %}
1875 enc_class pre_call_FPU %{
1876 // If method sets FPU control word restore it here
1877 debug_only(int off0 = cbuf.insts_size());
1878 if( Compile::current()->in_24_bit_fp_mode() ) {
1879 MacroAssembler masm(&cbuf);
1880 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1881 }
1882 debug_only(int off1 = cbuf.insts_size());
1883 assert(off1 - off0 == pre_call_FPU_size(), "correct size prediction");
1884 %}
1886 enc_class post_call_FPU %{
1887 // If method sets FPU control word do it here also
1888 if( Compile::current()->in_24_bit_fp_mode() ) {
1889 MacroAssembler masm(&cbuf);
1890 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
1891 }
1892 %}
1894 enc_class preserve_SP %{
1895 debug_only(int off0 = cbuf.insts_size());
1896 MacroAssembler _masm(&cbuf);
1897 // RBP is preserved across all calls, even compiled calls.
1898 // Use it to preserve RSP in places where the callee might change the SP.
1899 __ movptr(rbp_mh_SP_save, rsp);
1900 debug_only(int off1 = cbuf.insts_size());
1901 assert(off1 - off0 == preserve_SP_size(), "correct size prediction");
1902 %}
1904 enc_class restore_SP %{
1905 MacroAssembler _masm(&cbuf);
1906 __ movptr(rsp, rbp_mh_SP_save);
1907 %}
1909 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL
1910 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1911 // who we intended to call.
1912 cbuf.set_insts_mark();
1913 $$$emit8$primary;
1914 if ( !_method ) {
1915 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1916 runtime_call_Relocation::spec(), RELOC_IMM32 );
1917 } else if(_optimized_virtual) {
1918 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1919 opt_virtual_call_Relocation::spec(), RELOC_IMM32 );
1920 } else {
1921 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1922 static_call_Relocation::spec(), RELOC_IMM32 );
1923 }
1924 if( _method ) { // Emit stub for static call
1925 emit_java_to_interp(cbuf);
1926 }
1927 %}
1929 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL
1930 // !!!!!
1931 // Generate "Mov EAX,0x00", placeholder instruction to load oop-info
1932 // emit_call_dynamic_prologue( cbuf );
1933 cbuf.set_insts_mark();
1934 emit_opcode(cbuf, 0xB8 + EAX_enc); // mov EAX,-1
1935 emit_d32_reloc(cbuf, (int)Universe::non_oop_word(), oop_Relocation::spec_for_immediate(), RELOC_IMM32);
1936 address virtual_call_oop_addr = cbuf.insts_mark();
1937 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1938 // who we intended to call.
1939 cbuf.set_insts_mark();
1940 $$$emit8$primary;
1941 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1942 virtual_call_Relocation::spec(virtual_call_oop_addr), RELOC_IMM32 );
1943 %}
1945 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL
1946 int disp = in_bytes(methodOopDesc::from_compiled_offset());
1947 assert( -128 <= disp && disp <= 127, "compiled_code_offset isn't small");
1949 // CALL *[EAX+in_bytes(methodOopDesc::from_compiled_code_entry_point_offset())]
1950 cbuf.set_insts_mark();
1951 $$$emit8$primary;
1952 emit_rm(cbuf, 0x01, $secondary, EAX_enc ); // R/M byte
1953 emit_d8(cbuf, disp); // Displacement
1955 %}
1957 enc_class Xor_Reg (eRegI dst) %{
1958 emit_opcode(cbuf, 0x33);
1959 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
1960 %}
1962 // Following encoding is no longer used, but may be restored if calling
1963 // convention changes significantly.
1964 // Became: Xor_Reg(EBP), Java_To_Runtime( labl )
1965 //
1966 // enc_class Java_Interpreter_Call (label labl) %{ // JAVA INTERPRETER CALL
1967 // // int ic_reg = Matcher::inline_cache_reg();
1968 // // int ic_encode = Matcher::_regEncode[ic_reg];
1969 // // int imo_reg = Matcher::interpreter_method_oop_reg();
1970 // // int imo_encode = Matcher::_regEncode[imo_reg];
1971 //
1972 // // // Interpreter expects method_oop in EBX, currently a callee-saved register,
1973 // // // so we load it immediately before the call
1974 // // emit_opcode(cbuf, 0x8B); // MOV imo_reg,ic_reg # method_oop
1975 // // emit_rm(cbuf, 0x03, imo_encode, ic_encode ); // R/M byte
1976 //
1977 // // xor rbp,ebp
1978 // emit_opcode(cbuf, 0x33);
1979 // emit_rm(cbuf, 0x3, EBP_enc, EBP_enc);
1980 //
1981 // // CALL to interpreter.
1982 // cbuf.set_insts_mark();
1983 // $$$emit8$primary;
1984 // emit_d32_reloc(cbuf, ($labl$$label - (int)(cbuf.insts_end()) - 4),
1985 // runtime_call_Relocation::spec(), RELOC_IMM32 );
1986 // %}
1988 enc_class RegOpcImm (eRegI dst, immI8 shift) %{ // SHL, SAR, SHR
1989 $$$emit8$primary;
1990 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1991 $$$emit8$shift$$constant;
1992 %}
1994 enc_class LdImmI (eRegI dst, immI src) %{ // Load Immediate
1995 // Load immediate does not have a zero or sign extended version
1996 // for 8-bit immediates
1997 emit_opcode(cbuf, 0xB8 + $dst$$reg);
1998 $$$emit32$src$$constant;
1999 %}
2001 enc_class LdImmP (eRegI dst, immI src) %{ // Load Immediate
2002 // Load immediate does not have a zero or sign extended version
2003 // for 8-bit immediates
2004 emit_opcode(cbuf, $primary + $dst$$reg);
2005 $$$emit32$src$$constant;
2006 %}
2008 enc_class LdImmL_Lo( eRegL dst, immL src) %{ // Load Immediate
2009 // Load immediate does not have a zero or sign extended version
2010 // for 8-bit immediates
2011 int dst_enc = $dst$$reg;
2012 int src_con = $src$$constant & 0x0FFFFFFFFL;
2013 if (src_con == 0) {
2014 // xor dst, dst
2015 emit_opcode(cbuf, 0x33);
2016 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
2017 } else {
2018 emit_opcode(cbuf, $primary + dst_enc);
2019 emit_d32(cbuf, src_con);
2020 }
2021 %}
2023 enc_class LdImmL_Hi( eRegL dst, immL src) %{ // Load Immediate
2024 // Load immediate does not have a zero or sign extended version
2025 // for 8-bit immediates
2026 int dst_enc = $dst$$reg + 2;
2027 int src_con = ((julong)($src$$constant)) >> 32;
2028 if (src_con == 0) {
2029 // xor dst, dst
2030 emit_opcode(cbuf, 0x33);
2031 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
2032 } else {
2033 emit_opcode(cbuf, $primary + dst_enc);
2034 emit_d32(cbuf, src_con);
2035 }
2036 %}
2039 enc_class LdImmD (immD src) %{ // Load Immediate
2040 if( is_positive_zero_double($src$$constant)) {
2041 // FLDZ
2042 emit_opcode(cbuf,0xD9);
2043 emit_opcode(cbuf,0xEE);
2044 } else if( is_positive_one_double($src$$constant)) {
2045 // FLD1
2046 emit_opcode(cbuf,0xD9);
2047 emit_opcode(cbuf,0xE8);
2048 } else {
2049 emit_opcode(cbuf,0xDD);
2050 emit_rm(cbuf, 0x0, 0x0, 0x5);
2051 emit_double_constant(cbuf, $src$$constant);
2052 }
2053 %}
2056 enc_class LdImmF (immF src) %{ // Load Immediate
2057 if( is_positive_zero_float($src$$constant)) {
2058 emit_opcode(cbuf,0xD9);
2059 emit_opcode(cbuf,0xEE);
2060 } else if( is_positive_one_float($src$$constant)) {
2061 emit_opcode(cbuf,0xD9);
2062 emit_opcode(cbuf,0xE8);
2063 } else {
2064 $$$emit8$primary;
2065 // Load immediate does not have a zero or sign extended version
2066 // for 8-bit immediates
2067 // First load to TOS, then move to dst
2068 emit_rm(cbuf, 0x0, 0x0, 0x5);
2069 emit_float_constant(cbuf, $src$$constant);
2070 }
2071 %}
2073 enc_class LdImmX (regX dst, immXF con) %{ // Load Immediate
2074 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2075 emit_float_constant(cbuf, $con$$constant);
2076 %}
2078 enc_class LdImmXD (regXD dst, immXD con) %{ // Load Immediate
2079 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2080 emit_double_constant(cbuf, $con$$constant);
2081 %}
2083 enc_class load_conXD (regXD dst, immXD con) %{ // Load double constant
2084 // UseXmmLoadAndClearUpper ? movsd(dst, con) : movlpd(dst, con)
2085 emit_opcode(cbuf, UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
2086 emit_opcode(cbuf, 0x0F);
2087 emit_opcode(cbuf, UseXmmLoadAndClearUpper ? 0x10 : 0x12);
2088 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2089 emit_double_constant(cbuf, $con$$constant);
2090 %}
2092 enc_class Opc_MemImm_F(immF src) %{
2093 cbuf.set_insts_mark();
2094 $$$emit8$primary;
2095 emit_rm(cbuf, 0x0, $secondary, 0x5);
2096 emit_float_constant(cbuf, $src$$constant);
2097 %}
2100 enc_class MovI2X_reg(regX dst, eRegI src) %{
2101 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2102 emit_opcode(cbuf, 0x0F );
2103 emit_opcode(cbuf, 0x6E );
2104 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2105 %}
2107 enc_class MovX2I_reg(eRegI dst, regX src) %{
2108 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2109 emit_opcode(cbuf, 0x0F );
2110 emit_opcode(cbuf, 0x7E );
2111 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2112 %}
2114 enc_class MovL2XD_reg(regXD dst, eRegL src, regXD tmp) %{
2115 { // MOVD $dst,$src.lo
2116 emit_opcode(cbuf,0x66);
2117 emit_opcode(cbuf,0x0F);
2118 emit_opcode(cbuf,0x6E);
2119 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2120 }
2121 { // MOVD $tmp,$src.hi
2122 emit_opcode(cbuf,0x66);
2123 emit_opcode(cbuf,0x0F);
2124 emit_opcode(cbuf,0x6E);
2125 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
2126 }
2127 { // PUNPCKLDQ $dst,$tmp
2128 emit_opcode(cbuf,0x66);
2129 emit_opcode(cbuf,0x0F);
2130 emit_opcode(cbuf,0x62);
2131 emit_rm(cbuf, 0x3, $dst$$reg, $tmp$$reg);
2132 }
2133 %}
2135 enc_class MovXD2L_reg(eRegL dst, regXD src, regXD tmp) %{
2136 { // MOVD $dst.lo,$src
2137 emit_opcode(cbuf,0x66);
2138 emit_opcode(cbuf,0x0F);
2139 emit_opcode(cbuf,0x7E);
2140 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2141 }
2142 { // PSHUFLW $tmp,$src,0x4E (01001110b)
2143 emit_opcode(cbuf,0xF2);
2144 emit_opcode(cbuf,0x0F);
2145 emit_opcode(cbuf,0x70);
2146 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
2147 emit_d8(cbuf, 0x4E);
2148 }
2149 { // MOVD $dst.hi,$tmp
2150 emit_opcode(cbuf,0x66);
2151 emit_opcode(cbuf,0x0F);
2152 emit_opcode(cbuf,0x7E);
2153 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
2154 }
2155 %}
2158 // Encode a reg-reg copy. If it is useless, then empty encoding.
2159 enc_class enc_Copy( eRegI dst, eRegI src ) %{
2160 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2161 %}
2163 enc_class enc_CopyL_Lo( eRegI dst, eRegL src ) %{
2164 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2165 %}
2167 // Encode xmm reg-reg copy. If it is useless, then empty encoding.
2168 enc_class enc_CopyXD( RegXD dst, RegXD src ) %{
2169 encode_CopyXD( cbuf, $dst$$reg, $src$$reg );
2170 %}
2172 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
2173 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2174 %}
2176 enc_class RegReg_Lo(eRegL dst, eRegL src) %{ // RegReg(Many)
2177 $$$emit8$primary;
2178 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2179 %}
2181 enc_class RegReg_Hi(eRegL dst, eRegL src) %{ // RegReg(Many)
2182 $$$emit8$secondary;
2183 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2184 %}
2186 enc_class RegReg_Lo2(eRegL dst, eRegL src) %{ // RegReg(Many)
2187 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2188 %}
2190 enc_class RegReg_Hi2(eRegL dst, eRegL src) %{ // RegReg(Many)
2191 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2192 %}
2194 enc_class RegReg_HiLo( eRegL src, eRegI dst ) %{
2195 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($src$$reg));
2196 %}
2198 enc_class Con32 (immI src) %{ // Con32(storeImmI)
2199 // Output immediate
2200 $$$emit32$src$$constant;
2201 %}
2203 enc_class Con32F_as_bits(immF src) %{ // storeF_imm
2204 // Output Float immediate bits
2205 jfloat jf = $src$$constant;
2206 int jf_as_bits = jint_cast( jf );
2207 emit_d32(cbuf, jf_as_bits);
2208 %}
2210 enc_class Con32XF_as_bits(immXF src) %{ // storeX_imm
2211 // Output Float immediate bits
2212 jfloat jf = $src$$constant;
2213 int jf_as_bits = jint_cast( jf );
2214 emit_d32(cbuf, jf_as_bits);
2215 %}
2217 enc_class Con16 (immI src) %{ // Con16(storeImmI)
2218 // Output immediate
2219 $$$emit16$src$$constant;
2220 %}
2222 enc_class Con_d32(immI src) %{
2223 emit_d32(cbuf,$src$$constant);
2224 %}
2226 enc_class conmemref (eRegP t1) %{ // Con32(storeImmI)
2227 // Output immediate memory reference
2228 emit_rm(cbuf, 0x00, $t1$$reg, 0x05 );
2229 emit_d32(cbuf, 0x00);
2230 %}
2232 enc_class lock_prefix( ) %{
2233 if( os::is_MP() )
2234 emit_opcode(cbuf,0xF0); // [Lock]
2235 %}
2237 // Cmp-xchg long value.
2238 // Note: we need to swap rbx, and rcx before and after the
2239 // cmpxchg8 instruction because the instruction uses
2240 // rcx as the high order word of the new value to store but
2241 // our register encoding uses rbx,.
2242 enc_class enc_cmpxchg8(eSIRegP mem_ptr) %{
2244 // XCHG rbx,ecx
2245 emit_opcode(cbuf,0x87);
2246 emit_opcode(cbuf,0xD9);
2247 // [Lock]
2248 if( os::is_MP() )
2249 emit_opcode(cbuf,0xF0);
2250 // CMPXCHG8 [Eptr]
2251 emit_opcode(cbuf,0x0F);
2252 emit_opcode(cbuf,0xC7);
2253 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2254 // XCHG rbx,ecx
2255 emit_opcode(cbuf,0x87);
2256 emit_opcode(cbuf,0xD9);
2257 %}
2259 enc_class enc_cmpxchg(eSIRegP mem_ptr) %{
2260 // [Lock]
2261 if( os::is_MP() )
2262 emit_opcode(cbuf,0xF0);
2264 // CMPXCHG [Eptr]
2265 emit_opcode(cbuf,0x0F);
2266 emit_opcode(cbuf,0xB1);
2267 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2268 %}
2270 enc_class enc_flags_ne_to_boolean( iRegI res ) %{
2271 int res_encoding = $res$$reg;
2273 // MOV res,0
2274 emit_opcode( cbuf, 0xB8 + res_encoding);
2275 emit_d32( cbuf, 0 );
2276 // JNE,s fail
2277 emit_opcode(cbuf,0x75);
2278 emit_d8(cbuf, 5 );
2279 // MOV res,1
2280 emit_opcode( cbuf, 0xB8 + res_encoding);
2281 emit_d32( cbuf, 1 );
2282 // fail:
2283 %}
2285 enc_class set_instruction_start( ) %{
2286 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2287 %}
2289 enc_class RegMem (eRegI ereg, memory mem) %{ // emit_reg_mem
2290 int reg_encoding = $ereg$$reg;
2291 int base = $mem$$base;
2292 int index = $mem$$index;
2293 int scale = $mem$$scale;
2294 int displace = $mem$$disp;
2295 bool disp_is_oop = $mem->disp_is_oop();
2296 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2297 %}
2299 enc_class RegMem_Hi(eRegL ereg, memory mem) %{ // emit_reg_mem
2300 int reg_encoding = HIGH_FROM_LOW($ereg$$reg); // Hi register of pair, computed from lo
2301 int base = $mem$$base;
2302 int index = $mem$$index;
2303 int scale = $mem$$scale;
2304 int displace = $mem$$disp + 4; // Offset is 4 further in memory
2305 assert( !$mem->disp_is_oop(), "Cannot add 4 to oop" );
2306 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, false/*disp_is_oop*/);
2307 %}
2309 enc_class move_long_small_shift( eRegL dst, immI_1_31 cnt ) %{
2310 int r1, r2;
2311 if( $tertiary == 0xA4 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2312 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2313 emit_opcode(cbuf,0x0F);
2314 emit_opcode(cbuf,$tertiary);
2315 emit_rm(cbuf, 0x3, r1, r2);
2316 emit_d8(cbuf,$cnt$$constant);
2317 emit_d8(cbuf,$primary);
2318 emit_rm(cbuf, 0x3, $secondary, r1);
2319 emit_d8(cbuf,$cnt$$constant);
2320 %}
2322 enc_class move_long_big_shift_sign( eRegL dst, immI_32_63 cnt ) %{
2323 emit_opcode( cbuf, 0x8B ); // Move
2324 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2325 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2326 emit_d8(cbuf,$primary);
2327 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
2328 emit_d8(cbuf,$cnt$$constant-32);
2329 }
2330 emit_d8(cbuf,$primary);
2331 emit_rm(cbuf, 0x3, $secondary, HIGH_FROM_LOW($dst$$reg));
2332 emit_d8(cbuf,31);
2333 %}
2335 enc_class move_long_big_shift_clr( eRegL dst, immI_32_63 cnt ) %{
2336 int r1, r2;
2337 if( $secondary == 0x5 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2338 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2340 emit_opcode( cbuf, 0x8B ); // Move r1,r2
2341 emit_rm(cbuf, 0x3, r1, r2);
2342 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2343 emit_opcode(cbuf,$primary);
2344 emit_rm(cbuf, 0x3, $secondary, r1);
2345 emit_d8(cbuf,$cnt$$constant-32);
2346 }
2347 emit_opcode(cbuf,0x33); // XOR r2,r2
2348 emit_rm(cbuf, 0x3, r2, r2);
2349 %}
2351 // Clone of RegMem but accepts an extra parameter to access each
2352 // half of a double in memory; it never needs relocation info.
2353 enc_class Mov_MemD_half_to_Reg (immI opcode, memory mem, immI disp_for_half, eRegI rm_reg) %{
2354 emit_opcode(cbuf,$opcode$$constant);
2355 int reg_encoding = $rm_reg$$reg;
2356 int base = $mem$$base;
2357 int index = $mem$$index;
2358 int scale = $mem$$scale;
2359 int displace = $mem$$disp + $disp_for_half$$constant;
2360 bool disp_is_oop = false;
2361 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2362 %}
2364 // !!!!! Special Custom Code used by MemMove, and stack access instructions !!!!!
2365 //
2366 // Clone of RegMem except the RM-byte's reg/opcode field is an ADLC-time constant
2367 // and it never needs relocation information.
2368 // Frequently used to move data between FPU's Stack Top and memory.
2369 enc_class RMopc_Mem_no_oop (immI rm_opcode, memory mem) %{
2370 int rm_byte_opcode = $rm_opcode$$constant;
2371 int base = $mem$$base;
2372 int index = $mem$$index;
2373 int scale = $mem$$scale;
2374 int displace = $mem$$disp;
2375 assert( !$mem->disp_is_oop(), "No oops here because no relo info allowed" );
2376 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, false);
2377 %}
2379 enc_class RMopc_Mem (immI rm_opcode, memory mem) %{
2380 int rm_byte_opcode = $rm_opcode$$constant;
2381 int base = $mem$$base;
2382 int index = $mem$$index;
2383 int scale = $mem$$scale;
2384 int displace = $mem$$disp;
2385 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2386 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
2387 %}
2389 enc_class RegLea (eRegI dst, eRegI src0, immI src1 ) %{ // emit_reg_lea
2390 int reg_encoding = $dst$$reg;
2391 int base = $src0$$reg; // 0xFFFFFFFF indicates no base
2392 int index = 0x04; // 0x04 indicates no index
2393 int scale = 0x00; // 0x00 indicates no scale
2394 int displace = $src1$$constant; // 0x00 indicates no displacement
2395 bool disp_is_oop = false;
2396 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2397 %}
2399 enc_class min_enc (eRegI dst, eRegI src) %{ // MIN
2400 // Compare dst,src
2401 emit_opcode(cbuf,0x3B);
2402 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2403 // jmp dst < src around move
2404 emit_opcode(cbuf,0x7C);
2405 emit_d8(cbuf,2);
2406 // move dst,src
2407 emit_opcode(cbuf,0x8B);
2408 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2409 %}
2411 enc_class max_enc (eRegI dst, eRegI src) %{ // MAX
2412 // Compare dst,src
2413 emit_opcode(cbuf,0x3B);
2414 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2415 // jmp dst > src around move
2416 emit_opcode(cbuf,0x7F);
2417 emit_d8(cbuf,2);
2418 // move dst,src
2419 emit_opcode(cbuf,0x8B);
2420 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2421 %}
2423 enc_class enc_FP_store(memory mem, regD src) %{
2424 // If src is FPR1, we can just FST to store it.
2425 // Else we need to FLD it to FPR1, then FSTP to store/pop it.
2426 int reg_encoding = 0x2; // Just store
2427 int base = $mem$$base;
2428 int index = $mem$$index;
2429 int scale = $mem$$scale;
2430 int displace = $mem$$disp;
2431 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2432 if( $src$$reg != FPR1L_enc ) {
2433 reg_encoding = 0x3; // Store & pop
2434 emit_opcode( cbuf, 0xD9 ); // FLD (i.e., push it)
2435 emit_d8( cbuf, 0xC0-1+$src$$reg );
2436 }
2437 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2438 emit_opcode(cbuf,$primary);
2439 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2440 %}
2442 enc_class neg_reg(eRegI dst) %{
2443 // NEG $dst
2444 emit_opcode(cbuf,0xF7);
2445 emit_rm(cbuf, 0x3, 0x03, $dst$$reg );
2446 %}
2448 enc_class setLT_reg(eCXRegI dst) %{
2449 // SETLT $dst
2450 emit_opcode(cbuf,0x0F);
2451 emit_opcode(cbuf,0x9C);
2452 emit_rm( cbuf, 0x3, 0x4, $dst$$reg );
2453 %}
2455 enc_class enc_cmpLTP(ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp) %{ // cadd_cmpLT
2456 int tmpReg = $tmp$$reg;
2458 // SUB $p,$q
2459 emit_opcode(cbuf,0x2B);
2460 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2461 // SBB $tmp,$tmp
2462 emit_opcode(cbuf,0x1B);
2463 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2464 // AND $tmp,$y
2465 emit_opcode(cbuf,0x23);
2466 emit_rm(cbuf, 0x3, tmpReg, $y$$reg);
2467 // ADD $p,$tmp
2468 emit_opcode(cbuf,0x03);
2469 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2470 %}
2472 enc_class enc_cmpLTP_mem(eRegI p, eRegI q, memory mem, eCXRegI tmp) %{ // cadd_cmpLT
2473 int tmpReg = $tmp$$reg;
2475 // SUB $p,$q
2476 emit_opcode(cbuf,0x2B);
2477 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2478 // SBB $tmp,$tmp
2479 emit_opcode(cbuf,0x1B);
2480 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2481 // AND $tmp,$y
2482 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2483 emit_opcode(cbuf,0x23);
2484 int reg_encoding = tmpReg;
2485 int base = $mem$$base;
2486 int index = $mem$$index;
2487 int scale = $mem$$scale;
2488 int displace = $mem$$disp;
2489 bool disp_is_oop = $mem->disp_is_oop();
2490 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2491 // ADD $p,$tmp
2492 emit_opcode(cbuf,0x03);
2493 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2494 %}
2496 enc_class shift_left_long( eRegL dst, eCXRegI shift ) %{
2497 // TEST shift,32
2498 emit_opcode(cbuf,0xF7);
2499 emit_rm(cbuf, 0x3, 0, ECX_enc);
2500 emit_d32(cbuf,0x20);
2501 // JEQ,s small
2502 emit_opcode(cbuf, 0x74);
2503 emit_d8(cbuf, 0x04);
2504 // MOV $dst.hi,$dst.lo
2505 emit_opcode( cbuf, 0x8B );
2506 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2507 // CLR $dst.lo
2508 emit_opcode(cbuf, 0x33);
2509 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
2510 // small:
2511 // SHLD $dst.hi,$dst.lo,$shift
2512 emit_opcode(cbuf,0x0F);
2513 emit_opcode(cbuf,0xA5);
2514 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2515 // SHL $dst.lo,$shift"
2516 emit_opcode(cbuf,0xD3);
2517 emit_rm(cbuf, 0x3, 0x4, $dst$$reg );
2518 %}
2520 enc_class shift_right_long( eRegL dst, eCXRegI shift ) %{
2521 // TEST shift,32
2522 emit_opcode(cbuf,0xF7);
2523 emit_rm(cbuf, 0x3, 0, ECX_enc);
2524 emit_d32(cbuf,0x20);
2525 // JEQ,s small
2526 emit_opcode(cbuf, 0x74);
2527 emit_d8(cbuf, 0x04);
2528 // MOV $dst.lo,$dst.hi
2529 emit_opcode( cbuf, 0x8B );
2530 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2531 // CLR $dst.hi
2532 emit_opcode(cbuf, 0x33);
2533 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($dst$$reg));
2534 // small:
2535 // SHRD $dst.lo,$dst.hi,$shift
2536 emit_opcode(cbuf,0x0F);
2537 emit_opcode(cbuf,0xAD);
2538 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2539 // SHR $dst.hi,$shift"
2540 emit_opcode(cbuf,0xD3);
2541 emit_rm(cbuf, 0x3, 0x5, HIGH_FROM_LOW($dst$$reg) );
2542 %}
2544 enc_class shift_right_arith_long( eRegL dst, eCXRegI shift ) %{
2545 // TEST shift,32
2546 emit_opcode(cbuf,0xF7);
2547 emit_rm(cbuf, 0x3, 0, ECX_enc);
2548 emit_d32(cbuf,0x20);
2549 // JEQ,s small
2550 emit_opcode(cbuf, 0x74);
2551 emit_d8(cbuf, 0x05);
2552 // MOV $dst.lo,$dst.hi
2553 emit_opcode( cbuf, 0x8B );
2554 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2555 // SAR $dst.hi,31
2556 emit_opcode(cbuf, 0xC1);
2557 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW($dst$$reg) );
2558 emit_d8(cbuf, 0x1F );
2559 // small:
2560 // SHRD $dst.lo,$dst.hi,$shift
2561 emit_opcode(cbuf,0x0F);
2562 emit_opcode(cbuf,0xAD);
2563 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2564 // SAR $dst.hi,$shift"
2565 emit_opcode(cbuf,0xD3);
2566 emit_rm(cbuf, 0x3, 0x7, HIGH_FROM_LOW($dst$$reg) );
2567 %}
2570 // ----------------- Encodings for floating point unit -----------------
2571 // May leave result in FPU-TOS or FPU reg depending on opcodes
2572 enc_class OpcReg_F (regF src) %{ // FMUL, FDIV
2573 $$$emit8$primary;
2574 emit_rm(cbuf, 0x3, $secondary, $src$$reg );
2575 %}
2577 // Pop argument in FPR0 with FSTP ST(0)
2578 enc_class PopFPU() %{
2579 emit_opcode( cbuf, 0xDD );
2580 emit_d8( cbuf, 0xD8 );
2581 %}
2583 // !!!!! equivalent to Pop_Reg_F
2584 enc_class Pop_Reg_D( regD dst ) %{
2585 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2586 emit_d8( cbuf, 0xD8+$dst$$reg );
2587 %}
2589 enc_class Push_Reg_D( regD dst ) %{
2590 emit_opcode( cbuf, 0xD9 );
2591 emit_d8( cbuf, 0xC0-1+$dst$$reg ); // FLD ST(i-1)
2592 %}
2594 enc_class strictfp_bias1( regD dst ) %{
2595 emit_opcode( cbuf, 0xDB ); // FLD m80real
2596 emit_opcode( cbuf, 0x2D );
2597 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias1() );
2598 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2599 emit_opcode( cbuf, 0xC8+$dst$$reg );
2600 %}
2602 enc_class strictfp_bias2( regD dst ) %{
2603 emit_opcode( cbuf, 0xDB ); // FLD m80real
2604 emit_opcode( cbuf, 0x2D );
2605 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias2() );
2606 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2607 emit_opcode( cbuf, 0xC8+$dst$$reg );
2608 %}
2610 // Special case for moving an integer register to a stack slot.
2611 enc_class OpcPRegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2612 store_to_stackslot( cbuf, $primary, $src$$reg, $dst$$disp );
2613 %}
2615 // Special case for moving a register to a stack slot.
2616 enc_class RegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2617 // Opcode already emitted
2618 emit_rm( cbuf, 0x02, $src$$reg, ESP_enc ); // R/M byte
2619 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
2620 emit_d32(cbuf, $dst$$disp); // Displacement
2621 %}
2623 // Push the integer in stackSlot 'src' onto FP-stack
2624 enc_class Push_Mem_I( memory src ) %{ // FILD [ESP+src]
2625 store_to_stackslot( cbuf, $primary, $secondary, $src$$disp );
2626 %}
2628 // Push the float in stackSlot 'src' onto FP-stack
2629 enc_class Push_Mem_F( memory src ) %{ // FLD_S [ESP+src]
2630 store_to_stackslot( cbuf, 0xD9, 0x00, $src$$disp );
2631 %}
2633 // Push the double in stackSlot 'src' onto FP-stack
2634 enc_class Push_Mem_D( memory src ) %{ // FLD_D [ESP+src]
2635 store_to_stackslot( cbuf, 0xDD, 0x00, $src$$disp );
2636 %}
2638 // Push FPU's TOS float to a stack-slot, and pop FPU-stack
2639 enc_class Pop_Mem_F( stackSlotF dst ) %{ // FSTP_S [ESP+dst]
2640 store_to_stackslot( cbuf, 0xD9, 0x03, $dst$$disp );
2641 %}
2643 // Same as Pop_Mem_F except for opcode
2644 // Push FPU's TOS double to a stack-slot, and pop FPU-stack
2645 enc_class Pop_Mem_D( stackSlotD dst ) %{ // FSTP_D [ESP+dst]
2646 store_to_stackslot( cbuf, 0xDD, 0x03, $dst$$disp );
2647 %}
2649 enc_class Pop_Reg_F( regF dst ) %{
2650 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2651 emit_d8( cbuf, 0xD8+$dst$$reg );
2652 %}
2654 enc_class Push_Reg_F( regF dst ) %{
2655 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2656 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2657 %}
2659 // Push FPU's float to a stack-slot, and pop FPU-stack
2660 enc_class Pop_Mem_Reg_F( stackSlotF dst, regF src ) %{
2661 int pop = 0x02;
2662 if ($src$$reg != FPR1L_enc) {
2663 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2664 emit_d8( cbuf, 0xC0-1+$src$$reg );
2665 pop = 0x03;
2666 }
2667 store_to_stackslot( cbuf, 0xD9, pop, $dst$$disp ); // FST<P>_S [ESP+dst]
2668 %}
2670 // Push FPU's double to a stack-slot, and pop FPU-stack
2671 enc_class Pop_Mem_Reg_D( stackSlotD dst, regD src ) %{
2672 int pop = 0x02;
2673 if ($src$$reg != FPR1L_enc) {
2674 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2675 emit_d8( cbuf, 0xC0-1+$src$$reg );
2676 pop = 0x03;
2677 }
2678 store_to_stackslot( cbuf, 0xDD, pop, $dst$$disp ); // FST<P>_D [ESP+dst]
2679 %}
2681 // Push FPU's double to a FPU-stack-slot, and pop FPU-stack
2682 enc_class Pop_Reg_Reg_D( regD dst, regF src ) %{
2683 int pop = 0xD0 - 1; // -1 since we skip FLD
2684 if ($src$$reg != FPR1L_enc) {
2685 emit_opcode( cbuf, 0xD9 ); // FLD ST(src-1)
2686 emit_d8( cbuf, 0xC0-1+$src$$reg );
2687 pop = 0xD8;
2688 }
2689 emit_opcode( cbuf, 0xDD );
2690 emit_d8( cbuf, pop+$dst$$reg ); // FST<P> ST(i)
2691 %}
2694 enc_class Mul_Add_F( regF dst, regF src, regF src1, regF src2 ) %{
2695 MacroAssembler masm(&cbuf);
2696 masm.fld_s( $src1$$reg-1); // nothing at TOS, load TOS from src1.reg
2697 masm.fmul( $src2$$reg+0); // value at TOS
2698 masm.fadd( $src$$reg+0); // value at TOS
2699 masm.fstp_d( $dst$$reg+0); // value at TOS, popped off after store
2700 %}
2703 enc_class Push_Reg_Mod_D( regD dst, regD src) %{
2704 // load dst in FPR0
2705 emit_opcode( cbuf, 0xD9 );
2706 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2707 if ($src$$reg != FPR1L_enc) {
2708 // fincstp
2709 emit_opcode (cbuf, 0xD9);
2710 emit_opcode (cbuf, 0xF7);
2711 // swap src with FPR1:
2712 // FXCH FPR1 with src
2713 emit_opcode(cbuf, 0xD9);
2714 emit_d8(cbuf, 0xC8-1+$src$$reg );
2715 // fdecstp
2716 emit_opcode (cbuf, 0xD9);
2717 emit_opcode (cbuf, 0xF6);
2718 }
2719 %}
2721 enc_class Push_ModD_encoding( regXD src0, regXD src1) %{
2722 // Allocate a word
2723 emit_opcode(cbuf,0x83); // SUB ESP,8
2724 emit_opcode(cbuf,0xEC);
2725 emit_d8(cbuf,0x08);
2727 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src1
2728 emit_opcode (cbuf, 0x0F );
2729 emit_opcode (cbuf, 0x11 );
2730 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2732 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2733 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2735 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src0
2736 emit_opcode (cbuf, 0x0F );
2737 emit_opcode (cbuf, 0x11 );
2738 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2740 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2741 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2743 %}
2745 enc_class Push_ModX_encoding( regX src0, regX src1) %{
2746 // Allocate a word
2747 emit_opcode(cbuf,0x83); // SUB ESP,4
2748 emit_opcode(cbuf,0xEC);
2749 emit_d8(cbuf,0x04);
2751 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src1
2752 emit_opcode (cbuf, 0x0F );
2753 emit_opcode (cbuf, 0x11 );
2754 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2756 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2757 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2759 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src0
2760 emit_opcode (cbuf, 0x0F );
2761 emit_opcode (cbuf, 0x11 );
2762 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2764 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2765 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2767 %}
2769 enc_class Push_ResultXD(regXD dst) %{
2770 store_to_stackslot( cbuf, 0xDD, 0x03, 0 ); //FSTP [ESP]
2772 // UseXmmLoadAndClearUpper ? movsd dst,[esp] : movlpd dst,[esp]
2773 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
2774 emit_opcode (cbuf, 0x0F );
2775 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0x10 : 0x12);
2776 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2778 emit_opcode(cbuf,0x83); // ADD ESP,8
2779 emit_opcode(cbuf,0xC4);
2780 emit_d8(cbuf,0x08);
2781 %}
2783 enc_class Push_ResultX(regX dst, immI d8) %{
2784 store_to_stackslot( cbuf, 0xD9, 0x03, 0 ); //FSTP_S [ESP]
2786 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
2787 emit_opcode (cbuf, 0x0F );
2788 emit_opcode (cbuf, 0x10 );
2789 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2791 emit_opcode(cbuf,0x83); // ADD ESP,d8 (4 or 8)
2792 emit_opcode(cbuf,0xC4);
2793 emit_d8(cbuf,$d8$$constant);
2794 %}
2796 enc_class Push_SrcXD(regXD src) %{
2797 // Allocate a word
2798 emit_opcode(cbuf,0x83); // SUB ESP,8
2799 emit_opcode(cbuf,0xEC);
2800 emit_d8(cbuf,0x08);
2802 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
2803 emit_opcode (cbuf, 0x0F );
2804 emit_opcode (cbuf, 0x11 );
2805 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
2807 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2808 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2809 %}
2811 enc_class push_stack_temp_qword() %{
2812 emit_opcode(cbuf,0x83); // SUB ESP,8
2813 emit_opcode(cbuf,0xEC);
2814 emit_d8 (cbuf,0x08);
2815 %}
2817 enc_class pop_stack_temp_qword() %{
2818 emit_opcode(cbuf,0x83); // ADD ESP,8
2819 emit_opcode(cbuf,0xC4);
2820 emit_d8 (cbuf,0x08);
2821 %}
2823 enc_class push_xmm_to_fpr1( regXD xmm_src ) %{
2824 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], xmm_src
2825 emit_opcode (cbuf, 0x0F );
2826 emit_opcode (cbuf, 0x11 );
2827 encode_RegMem(cbuf, $xmm_src$$reg, ESP_enc, 0x4, 0, 0, false);
2829 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2830 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2831 %}
2833 // Compute X^Y using Intel's fast hardware instructions, if possible.
2834 // Otherwise return a NaN.
2835 enc_class pow_exp_core_encoding %{
2836 // FPR1 holds Y*ln2(X). Compute FPR1 = 2^(Y*ln2(X))
2837 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xC0); // fdup = fld st(0) Q Q
2838 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xFC); // frndint int(Q) Q
2839 emit_opcode(cbuf,0xDC); emit_opcode(cbuf,0xE9); // fsub st(1) -= st(0); int(Q) frac(Q)
2840 emit_opcode(cbuf,0xDB); // FISTP [ESP] frac(Q)
2841 emit_opcode(cbuf,0x1C);
2842 emit_d8(cbuf,0x24);
2843 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xF0); // f2xm1 2^frac(Q)-1
2844 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xE8); // fld1 1 2^frac(Q)-1
2845 emit_opcode(cbuf,0xDE); emit_opcode(cbuf,0xC1); // faddp 2^frac(Q)
2846 emit_opcode(cbuf,0x8B); // mov rax,[esp+0]=int(Q)
2847 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 0, false);
2848 emit_opcode(cbuf,0xC7); // mov rcx,0xFFFFF800 - overflow mask
2849 emit_rm(cbuf, 0x3, 0x0, ECX_enc);
2850 emit_d32(cbuf,0xFFFFF800);
2851 emit_opcode(cbuf,0x81); // add rax,1023 - the double exponent bias
2852 emit_rm(cbuf, 0x3, 0x0, EAX_enc);
2853 emit_d32(cbuf,1023);
2854 emit_opcode(cbuf,0x8B); // mov rbx,eax
2855 emit_rm(cbuf, 0x3, EBX_enc, EAX_enc);
2856 emit_opcode(cbuf,0xC1); // shl rax,20 - Slide to exponent position
2857 emit_rm(cbuf,0x3,0x4,EAX_enc);
2858 emit_d8(cbuf,20);
2859 emit_opcode(cbuf,0x85); // test rbx,ecx - check for overflow
2860 emit_rm(cbuf, 0x3, EBX_enc, ECX_enc);
2861 emit_opcode(cbuf,0x0F); emit_opcode(cbuf,0x45); // CMOVne rax,ecx - overflow; stuff NAN into EAX
2862 emit_rm(cbuf, 0x3, EAX_enc, ECX_enc);
2863 emit_opcode(cbuf,0x89); // mov [esp+4],eax - Store as part of double word
2864 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 4, false);
2865 emit_opcode(cbuf,0xC7); // mov [esp+0],0 - [ESP] = (double)(1<<int(Q)) = 2^int(Q)
2866 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2867 emit_d32(cbuf,0);
2868 emit_opcode(cbuf,0xDC); // fmul dword st(0),[esp+0]; FPR1 = 2^int(Q)*2^frac(Q) = 2^Q
2869 encode_RegMem(cbuf, 0x1, ESP_enc, 0x4, 0, 0, false);
2870 %}
2872 // enc_class Pop_Reg_Mod_D( regD dst, regD src)
2873 // was replaced by Push_Result_Mod_D followed by Pop_Reg_X() or Pop_Mem_X()
2875 enc_class Push_Result_Mod_D( regD src) %{
2876 if ($src$$reg != FPR1L_enc) {
2877 // fincstp
2878 emit_opcode (cbuf, 0xD9);
2879 emit_opcode (cbuf, 0xF7);
2880 // FXCH FPR1 with src
2881 emit_opcode(cbuf, 0xD9);
2882 emit_d8(cbuf, 0xC8-1+$src$$reg );
2883 // fdecstp
2884 emit_opcode (cbuf, 0xD9);
2885 emit_opcode (cbuf, 0xF6);
2886 }
2887 // // following asm replaced with Pop_Reg_F or Pop_Mem_F
2888 // // FSTP FPR$dst$$reg
2889 // emit_opcode( cbuf, 0xDD );
2890 // emit_d8( cbuf, 0xD8+$dst$$reg );
2891 %}
2893 enc_class fnstsw_sahf_skip_parity() %{
2894 // fnstsw ax
2895 emit_opcode( cbuf, 0xDF );
2896 emit_opcode( cbuf, 0xE0 );
2897 // sahf
2898 emit_opcode( cbuf, 0x9E );
2899 // jnp ::skip
2900 emit_opcode( cbuf, 0x7B );
2901 emit_opcode( cbuf, 0x05 );
2902 %}
2904 enc_class emitModD() %{
2905 // fprem must be iterative
2906 // :: loop
2907 // fprem
2908 emit_opcode( cbuf, 0xD9 );
2909 emit_opcode( cbuf, 0xF8 );
2910 // wait
2911 emit_opcode( cbuf, 0x9b );
2912 // fnstsw ax
2913 emit_opcode( cbuf, 0xDF );
2914 emit_opcode( cbuf, 0xE0 );
2915 // sahf
2916 emit_opcode( cbuf, 0x9E );
2917 // jp ::loop
2918 emit_opcode( cbuf, 0x0F );
2919 emit_opcode( cbuf, 0x8A );
2920 emit_opcode( cbuf, 0xF4 );
2921 emit_opcode( cbuf, 0xFF );
2922 emit_opcode( cbuf, 0xFF );
2923 emit_opcode( cbuf, 0xFF );
2924 %}
2926 enc_class fpu_flags() %{
2927 // fnstsw_ax
2928 emit_opcode( cbuf, 0xDF);
2929 emit_opcode( cbuf, 0xE0);
2930 // test ax,0x0400
2931 emit_opcode( cbuf, 0x66 ); // operand-size prefix for 16-bit immediate
2932 emit_opcode( cbuf, 0xA9 );
2933 emit_d16 ( cbuf, 0x0400 );
2934 // // // This sequence works, but stalls for 12-16 cycles on PPro
2935 // // test rax,0x0400
2936 // emit_opcode( cbuf, 0xA9 );
2937 // emit_d32 ( cbuf, 0x00000400 );
2938 //
2939 // jz exit (no unordered comparison)
2940 emit_opcode( cbuf, 0x74 );
2941 emit_d8 ( cbuf, 0x02 );
2942 // mov ah,1 - treat as LT case (set carry flag)
2943 emit_opcode( cbuf, 0xB4 );
2944 emit_d8 ( cbuf, 0x01 );
2945 // sahf
2946 emit_opcode( cbuf, 0x9E);
2947 %}
2949 enc_class cmpF_P6_fixup() %{
2950 // Fixup the integer flags in case comparison involved a NaN
2951 //
2952 // JNP exit (no unordered comparison, P-flag is set by NaN)
2953 emit_opcode( cbuf, 0x7B );
2954 emit_d8 ( cbuf, 0x03 );
2955 // MOV AH,1 - treat as LT case (set carry flag)
2956 emit_opcode( cbuf, 0xB4 );
2957 emit_d8 ( cbuf, 0x01 );
2958 // SAHF
2959 emit_opcode( cbuf, 0x9E);
2960 // NOP // target for branch to avoid branch to branch
2961 emit_opcode( cbuf, 0x90);
2962 %}
2964 // fnstsw_ax();
2965 // sahf();
2966 // movl(dst, nan_result);
2967 // jcc(Assembler::parity, exit);
2968 // movl(dst, less_result);
2969 // jcc(Assembler::below, exit);
2970 // movl(dst, equal_result);
2971 // jcc(Assembler::equal, exit);
2972 // movl(dst, greater_result);
2974 // less_result = 1;
2975 // greater_result = -1;
2976 // equal_result = 0;
2977 // nan_result = -1;
2979 enc_class CmpF_Result(eRegI dst) %{
2980 // fnstsw_ax();
2981 emit_opcode( cbuf, 0xDF);
2982 emit_opcode( cbuf, 0xE0);
2983 // sahf
2984 emit_opcode( cbuf, 0x9E);
2985 // movl(dst, nan_result);
2986 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2987 emit_d32( cbuf, -1 );
2988 // jcc(Assembler::parity, exit);
2989 emit_opcode( cbuf, 0x7A );
2990 emit_d8 ( cbuf, 0x13 );
2991 // movl(dst, less_result);
2992 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2993 emit_d32( cbuf, -1 );
2994 // jcc(Assembler::below, exit);
2995 emit_opcode( cbuf, 0x72 );
2996 emit_d8 ( cbuf, 0x0C );
2997 // movl(dst, equal_result);
2998 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2999 emit_d32( cbuf, 0 );
3000 // jcc(Assembler::equal, exit);
3001 emit_opcode( cbuf, 0x74 );
3002 emit_d8 ( cbuf, 0x05 );
3003 // movl(dst, greater_result);
3004 emit_opcode( cbuf, 0xB8 + $dst$$reg);
3005 emit_d32( cbuf, 1 );
3006 %}
3009 // XMM version of CmpF_Result. Because the XMM compare
3010 // instructions set the EFLAGS directly. It becomes simpler than
3011 // the float version above.
3012 enc_class CmpX_Result(eRegI dst) %{
3013 MacroAssembler _masm(&cbuf);
3014 Label nan, inc, done;
3016 __ jccb(Assembler::parity, nan);
3017 __ jccb(Assembler::equal, done);
3018 __ jccb(Assembler::above, inc);
3019 __ bind(nan);
3020 __ decrement(as_Register($dst$$reg)); // NO L qqq
3021 __ jmpb(done);
3022 __ bind(inc);
3023 __ increment(as_Register($dst$$reg)); // NO L qqq
3024 __ bind(done);
3025 %}
3027 // Compare the longs and set flags
3028 // BROKEN! Do Not use as-is
3029 enc_class cmpl_test( eRegL src1, eRegL src2 ) %{
3030 // CMP $src1.hi,$src2.hi
3031 emit_opcode( cbuf, 0x3B );
3032 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
3033 // JNE,s done
3034 emit_opcode(cbuf,0x75);
3035 emit_d8(cbuf, 2 );
3036 // CMP $src1.lo,$src2.lo
3037 emit_opcode( cbuf, 0x3B );
3038 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3039 // done:
3040 %}
3042 enc_class convert_int_long( regL dst, eRegI src ) %{
3043 // mov $dst.lo,$src
3044 int dst_encoding = $dst$$reg;
3045 int src_encoding = $src$$reg;
3046 encode_Copy( cbuf, dst_encoding , src_encoding );
3047 // mov $dst.hi,$src
3048 encode_Copy( cbuf, HIGH_FROM_LOW(dst_encoding), src_encoding );
3049 // sar $dst.hi,31
3050 emit_opcode( cbuf, 0xC1 );
3051 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW(dst_encoding) );
3052 emit_d8(cbuf, 0x1F );
3053 %}
3055 enc_class convert_long_double( eRegL src ) %{
3056 // push $src.hi
3057 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
3058 // push $src.lo
3059 emit_opcode(cbuf, 0x50+$src$$reg );
3060 // fild 64-bits at [SP]
3061 emit_opcode(cbuf,0xdf);
3062 emit_d8(cbuf, 0x6C);
3063 emit_d8(cbuf, 0x24);
3064 emit_d8(cbuf, 0x00);
3065 // pop stack
3066 emit_opcode(cbuf, 0x83); // add SP, #8
3067 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3068 emit_d8(cbuf, 0x8);
3069 %}
3071 enc_class multiply_con_and_shift_high( eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr ) %{
3072 // IMUL EDX:EAX,$src1
3073 emit_opcode( cbuf, 0xF7 );
3074 emit_rm( cbuf, 0x3, 0x5, $src1$$reg );
3075 // SAR EDX,$cnt-32
3076 int shift_count = ((int)$cnt$$constant) - 32;
3077 if (shift_count > 0) {
3078 emit_opcode(cbuf, 0xC1);
3079 emit_rm(cbuf, 0x3, 7, $dst$$reg );
3080 emit_d8(cbuf, shift_count);
3081 }
3082 %}
3084 // this version doesn't have add sp, 8
3085 enc_class convert_long_double2( eRegL src ) %{
3086 // push $src.hi
3087 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
3088 // push $src.lo
3089 emit_opcode(cbuf, 0x50+$src$$reg );
3090 // fild 64-bits at [SP]
3091 emit_opcode(cbuf,0xdf);
3092 emit_d8(cbuf, 0x6C);
3093 emit_d8(cbuf, 0x24);
3094 emit_d8(cbuf, 0x00);
3095 %}
3097 enc_class long_int_multiply( eADXRegL dst, nadxRegI src) %{
3098 // Basic idea: long = (long)int * (long)int
3099 // IMUL EDX:EAX, src
3100 emit_opcode( cbuf, 0xF7 );
3101 emit_rm( cbuf, 0x3, 0x5, $src$$reg);
3102 %}
3104 enc_class long_uint_multiply( eADXRegL dst, nadxRegI src) %{
3105 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
3106 // MUL EDX:EAX, src
3107 emit_opcode( cbuf, 0xF7 );
3108 emit_rm( cbuf, 0x3, 0x4, $src$$reg);
3109 %}
3111 enc_class long_multiply( eADXRegL dst, eRegL src, eRegI tmp ) %{
3112 // Basic idea: lo(result) = lo(x_lo * y_lo)
3113 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
3114 // MOV $tmp,$src.lo
3115 encode_Copy( cbuf, $tmp$$reg, $src$$reg );
3116 // IMUL $tmp,EDX
3117 emit_opcode( cbuf, 0x0F );
3118 emit_opcode( cbuf, 0xAF );
3119 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3120 // MOV EDX,$src.hi
3121 encode_Copy( cbuf, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg) );
3122 // IMUL EDX,EAX
3123 emit_opcode( cbuf, 0x0F );
3124 emit_opcode( cbuf, 0xAF );
3125 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
3126 // ADD $tmp,EDX
3127 emit_opcode( cbuf, 0x03 );
3128 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3129 // MUL EDX:EAX,$src.lo
3130 emit_opcode( cbuf, 0xF7 );
3131 emit_rm( cbuf, 0x3, 0x4, $src$$reg );
3132 // ADD EDX,ESI
3133 emit_opcode( cbuf, 0x03 );
3134 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $tmp$$reg );
3135 %}
3137 enc_class long_multiply_con( eADXRegL dst, immL_127 src, eRegI tmp ) %{
3138 // Basic idea: lo(result) = lo(src * y_lo)
3139 // hi(result) = hi(src * y_lo) + lo(src * y_hi)
3140 // IMUL $tmp,EDX,$src
3141 emit_opcode( cbuf, 0x6B );
3142 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3143 emit_d8( cbuf, (int)$src$$constant );
3144 // MOV EDX,$src
3145 emit_opcode(cbuf, 0xB8 + EDX_enc);
3146 emit_d32( cbuf, (int)$src$$constant );
3147 // MUL EDX:EAX,EDX
3148 emit_opcode( cbuf, 0xF7 );
3149 emit_rm( cbuf, 0x3, 0x4, EDX_enc );
3150 // ADD EDX,ESI
3151 emit_opcode( cbuf, 0x03 );
3152 emit_rm( cbuf, 0x3, EDX_enc, $tmp$$reg );
3153 %}
3155 enc_class long_div( eRegL src1, eRegL src2 ) %{
3156 // PUSH src1.hi
3157 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3158 // PUSH src1.lo
3159 emit_opcode(cbuf, 0x50+$src1$$reg );
3160 // PUSH src2.hi
3161 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3162 // PUSH src2.lo
3163 emit_opcode(cbuf, 0x50+$src2$$reg );
3164 // CALL directly to the runtime
3165 cbuf.set_insts_mark();
3166 emit_opcode(cbuf,0xE8); // Call into runtime
3167 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::ldiv) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3168 // Restore stack
3169 emit_opcode(cbuf, 0x83); // add SP, #framesize
3170 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3171 emit_d8(cbuf, 4*4);
3172 %}
3174 enc_class long_mod( eRegL src1, eRegL src2 ) %{
3175 // PUSH src1.hi
3176 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3177 // PUSH src1.lo
3178 emit_opcode(cbuf, 0x50+$src1$$reg );
3179 // PUSH src2.hi
3180 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3181 // PUSH src2.lo
3182 emit_opcode(cbuf, 0x50+$src2$$reg );
3183 // CALL directly to the runtime
3184 cbuf.set_insts_mark();
3185 emit_opcode(cbuf,0xE8); // Call into runtime
3186 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::lrem ) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3187 // Restore stack
3188 emit_opcode(cbuf, 0x83); // add SP, #framesize
3189 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3190 emit_d8(cbuf, 4*4);
3191 %}
3193 enc_class long_cmp_flags0( eRegL src, eRegI tmp ) %{
3194 // MOV $tmp,$src.lo
3195 emit_opcode(cbuf, 0x8B);
3196 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
3197 // OR $tmp,$src.hi
3198 emit_opcode(cbuf, 0x0B);
3199 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
3200 %}
3202 enc_class long_cmp_flags1( eRegL src1, eRegL src2 ) %{
3203 // CMP $src1.lo,$src2.lo
3204 emit_opcode( cbuf, 0x3B );
3205 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3206 // JNE,s skip
3207 emit_cc(cbuf, 0x70, 0x5);
3208 emit_d8(cbuf,2);
3209 // CMP $src1.hi,$src2.hi
3210 emit_opcode( cbuf, 0x3B );
3211 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
3212 %}
3214 enc_class long_cmp_flags2( eRegL src1, eRegL src2, eRegI tmp ) %{
3215 // CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits
3216 emit_opcode( cbuf, 0x3B );
3217 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3218 // MOV $tmp,$src1.hi
3219 emit_opcode( cbuf, 0x8B );
3220 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src1$$reg) );
3221 // SBB $tmp,$src2.hi\t! Compute flags for long compare
3222 emit_opcode( cbuf, 0x1B );
3223 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src2$$reg) );
3224 %}
3226 enc_class long_cmp_flags3( eRegL src, eRegI tmp ) %{
3227 // XOR $tmp,$tmp
3228 emit_opcode(cbuf,0x33); // XOR
3229 emit_rm(cbuf,0x3, $tmp$$reg, $tmp$$reg);
3230 // CMP $tmp,$src.lo
3231 emit_opcode( cbuf, 0x3B );
3232 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg );
3233 // SBB $tmp,$src.hi
3234 emit_opcode( cbuf, 0x1B );
3235 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg) );
3236 %}
3238 // Sniff, sniff... smells like Gnu Superoptimizer
3239 enc_class neg_long( eRegL dst ) %{
3240 emit_opcode(cbuf,0xF7); // NEG hi
3241 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3242 emit_opcode(cbuf,0xF7); // NEG lo
3243 emit_rm (cbuf,0x3, 0x3, $dst$$reg );
3244 emit_opcode(cbuf,0x83); // SBB hi,0
3245 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3246 emit_d8 (cbuf,0 );
3247 %}
3249 enc_class movq_ld(regXD dst, memory mem) %{
3250 MacroAssembler _masm(&cbuf);
3251 __ movq($dst$$XMMRegister, $mem$$Address);
3252 %}
3254 enc_class movq_st(memory mem, regXD src) %{
3255 MacroAssembler _masm(&cbuf);
3256 __ movq($mem$$Address, $src$$XMMRegister);
3257 %}
3259 enc_class pshufd_8x8(regX dst, regX src) %{
3260 MacroAssembler _masm(&cbuf);
3262 encode_CopyXD(cbuf, $dst$$reg, $src$$reg);
3263 __ punpcklbw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg));
3264 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg), 0x00);
3265 %}
3267 enc_class pshufd_4x16(regX dst, regX src) %{
3268 MacroAssembler _masm(&cbuf);
3270 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), 0x00);
3271 %}
3273 enc_class pshufd(regXD dst, regXD src, int mode) %{
3274 MacroAssembler _masm(&cbuf);
3276 __ pshufd(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), $mode);
3277 %}
3279 enc_class pxor(regXD dst, regXD src) %{
3280 MacroAssembler _masm(&cbuf);
3282 __ pxor(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg));
3283 %}
3285 enc_class mov_i2x(regXD dst, eRegI src) %{
3286 MacroAssembler _masm(&cbuf);
3288 __ movdl(as_XMMRegister($dst$$reg), as_Register($src$$reg));
3289 %}
3292 // Because the transitions from emitted code to the runtime
3293 // monitorenter/exit helper stubs are so slow it's critical that
3294 // we inline both the stack-locking fast-path and the inflated fast path.
3295 //
3296 // See also: cmpFastLock and cmpFastUnlock.
3297 //
3298 // What follows is a specialized inline transliteration of the code
3299 // in slow_enter() and slow_exit(). If we're concerned about I$ bloat
3300 // another option would be to emit TrySlowEnter and TrySlowExit methods
3301 // at startup-time. These methods would accept arguments as
3302 // (rax,=Obj, rbx=Self, rcx=box, rdx=Scratch) and return success-failure
3303 // indications in the icc.ZFlag. Fast_Lock and Fast_Unlock would simply
3304 // marshal the arguments and emit calls to TrySlowEnter and TrySlowExit.
3305 // In practice, however, the # of lock sites is bounded and is usually small.
3306 // Besides the call overhead, TrySlowEnter and TrySlowExit might suffer
3307 // if the processor uses simple bimodal branch predictors keyed by EIP
3308 // Since the helper routines would be called from multiple synchronization
3309 // sites.
3310 //
3311 // An even better approach would be write "MonitorEnter()" and "MonitorExit()"
3312 // in java - using j.u.c and unsafe - and just bind the lock and unlock sites
3313 // to those specialized methods. That'd give us a mostly platform-independent
3314 // implementation that the JITs could optimize and inline at their pleasure.
3315 // Done correctly, the only time we'd need to cross to native could would be
3316 // to park() or unpark() threads. We'd also need a few more unsafe operators
3317 // to (a) prevent compiler-JIT reordering of non-volatile accesses, and
3318 // (b) explicit barriers or fence operations.
3319 //
3320 // TODO:
3321 //
3322 // * Arrange for C2 to pass "Self" into Fast_Lock and Fast_Unlock in one of the registers (scr).
3323 // This avoids manifesting the Self pointer in the Fast_Lock and Fast_Unlock terminals.
3324 // Given TLAB allocation, Self is usually manifested in a register, so passing it into
3325 // the lock operators would typically be faster than reifying Self.
3326 //
3327 // * Ideally I'd define the primitives as:
3328 // fast_lock (nax Obj, nax box, EAX tmp, nax scr) where box, tmp and scr are KILLED.
3329 // fast_unlock (nax Obj, EAX box, nax tmp) where box and tmp are KILLED
3330 // Unfortunately ADLC bugs prevent us from expressing the ideal form.
3331 // Instead, we're stuck with a rather awkward and brittle register assignments below.
3332 // Furthermore the register assignments are overconstrained, possibly resulting in
3333 // sub-optimal code near the synchronization site.
3334 //
3335 // * Eliminate the sp-proximity tests and just use "== Self" tests instead.
3336 // Alternately, use a better sp-proximity test.
3337 //
3338 // * Currently ObjectMonitor._Owner can hold either an sp value or a (THREAD *) value.
3339 // Either one is sufficient to uniquely identify a thread.
3340 // TODO: eliminate use of sp in _owner and use get_thread(tr) instead.
3341 //
3342 // * Intrinsify notify() and notifyAll() for the common cases where the
3343 // object is locked by the calling thread but the waitlist is empty.
3344 // avoid the expensive JNI call to JVM_Notify() and JVM_NotifyAll().
3345 //
3346 // * use jccb and jmpb instead of jcc and jmp to improve code density.
3347 // But beware of excessive branch density on AMD Opterons.
3348 //
3349 // * Both Fast_Lock and Fast_Unlock set the ICC.ZF to indicate success
3350 // or failure of the fast-path. If the fast-path fails then we pass
3351 // control to the slow-path, typically in C. In Fast_Lock and
3352 // Fast_Unlock we often branch to DONE_LABEL, just to find that C2
3353 // will emit a conditional branch immediately after the node.
3354 // So we have branches to branches and lots of ICC.ZF games.
3355 // Instead, it might be better to have C2 pass a "FailureLabel"
3356 // into Fast_Lock and Fast_Unlock. In the case of success, control
3357 // will drop through the node. ICC.ZF is undefined at exit.
3358 // In the case of failure, the node will branch directly to the
3359 // FailureLabel
3362 // obj: object to lock
3363 // box: on-stack box address (displaced header location) - KILLED
3364 // rax,: tmp -- KILLED
3365 // scr: tmp -- KILLED
3366 enc_class Fast_Lock( eRegP obj, eRegP box, eAXRegI tmp, eRegP scr ) %{
3368 Register objReg = as_Register($obj$$reg);
3369 Register boxReg = as_Register($box$$reg);
3370 Register tmpReg = as_Register($tmp$$reg);
3371 Register scrReg = as_Register($scr$$reg);
3373 // Ensure the register assignents are disjoint
3374 guarantee (objReg != boxReg, "") ;
3375 guarantee (objReg != tmpReg, "") ;
3376 guarantee (objReg != scrReg, "") ;
3377 guarantee (boxReg != tmpReg, "") ;
3378 guarantee (boxReg != scrReg, "") ;
3379 guarantee (tmpReg == as_Register(EAX_enc), "") ;
3381 MacroAssembler masm(&cbuf);
3383 if (_counters != NULL) {
3384 masm.atomic_incl(ExternalAddress((address) _counters->total_entry_count_addr()));
3385 }
3386 if (EmitSync & 1) {
3387 // set box->dhw = unused_mark (3)
3388 // Force all sync thru slow-path: slow_enter() and slow_exit()
3389 masm.movptr (Address(boxReg, 0), int32_t(markOopDesc::unused_mark())) ;
3390 masm.cmpptr (rsp, (int32_t)0) ;
3391 } else
3392 if (EmitSync & 2) {
3393 Label DONE_LABEL ;
3394 if (UseBiasedLocking) {
3395 // Note: tmpReg maps to the swap_reg argument and scrReg to the tmp_reg argument.
3396 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3397 }
3399 masm.movptr(tmpReg, Address(objReg, 0)) ; // fetch markword
3400 masm.orptr (tmpReg, 0x1);
3401 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3402 if (os::is_MP()) { masm.lock(); }
3403 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3404 masm.jcc(Assembler::equal, DONE_LABEL);
3405 // Recursive locking
3406 masm.subptr(tmpReg, rsp);
3407 masm.andptr(tmpReg, (int32_t) 0xFFFFF003 );
3408 masm.movptr(Address(boxReg, 0), tmpReg);
3409 masm.bind(DONE_LABEL) ;
3410 } else {
3411 // Possible cases that we'll encounter in fast_lock
3412 // ------------------------------------------------
3413 // * Inflated
3414 // -- unlocked
3415 // -- Locked
3416 // = by self
3417 // = by other
3418 // * biased
3419 // -- by Self
3420 // -- by other
3421 // * neutral
3422 // * stack-locked
3423 // -- by self
3424 // = sp-proximity test hits
3425 // = sp-proximity test generates false-negative
3426 // -- by other
3427 //
3429 Label IsInflated, DONE_LABEL, PopDone ;
3431 // TODO: optimize away redundant LDs of obj->mark and improve the markword triage
3432 // order to reduce the number of conditional branches in the most common cases.
3433 // Beware -- there's a subtle invariant that fetch of the markword
3434 // at [FETCH], below, will never observe a biased encoding (*101b).
3435 // If this invariant is not held we risk exclusion (safety) failure.
3436 if (UseBiasedLocking && !UseOptoBiasInlining) {
3437 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3438 }
3440 masm.movptr(tmpReg, Address(objReg, 0)) ; // [FETCH]
3441 masm.testptr(tmpReg, 0x02) ; // Inflated v (Stack-locked or neutral)
3442 masm.jccb (Assembler::notZero, IsInflated) ;
3444 // Attempt stack-locking ...
3445 masm.orptr (tmpReg, 0x1);
3446 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3447 if (os::is_MP()) { masm.lock(); }
3448 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3449 if (_counters != NULL) {
3450 masm.cond_inc32(Assembler::equal,
3451 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3452 }
3453 masm.jccb (Assembler::equal, DONE_LABEL);
3455 // Recursive locking
3456 masm.subptr(tmpReg, rsp);
3457 masm.andptr(tmpReg, 0xFFFFF003 );
3458 masm.movptr(Address(boxReg, 0), tmpReg);
3459 if (_counters != NULL) {
3460 masm.cond_inc32(Assembler::equal,
3461 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3462 }
3463 masm.jmp (DONE_LABEL) ;
3465 masm.bind (IsInflated) ;
3467 // The object is inflated.
3468 //
3469 // TODO-FIXME: eliminate the ugly use of manifest constants:
3470 // Use markOopDesc::monitor_value instead of "2".
3471 // use markOop::unused_mark() instead of "3".
3472 // The tmpReg value is an objectMonitor reference ORed with
3473 // markOopDesc::monitor_value (2). We can either convert tmpReg to an
3474 // objectmonitor pointer by masking off the "2" bit or we can just
3475 // use tmpReg as an objectmonitor pointer but bias the objectmonitor
3476 // field offsets with "-2" to compensate for and annul the low-order tag bit.
3477 //
3478 // I use the latter as it avoids AGI stalls.
3479 // As such, we write "mov r, [tmpReg+OFFSETOF(Owner)-2]"
3480 // instead of "mov r, [tmpReg+OFFSETOF(Owner)]".
3481 //
3482 #define OFFSET_SKEWED(f) ((ObjectMonitor::f ## _offset_in_bytes())-2)
3484 // boxReg refers to the on-stack BasicLock in the current frame.
3485 // We'd like to write:
3486 // set box->_displaced_header = markOop::unused_mark(). Any non-0 value suffices.
3487 // This is convenient but results a ST-before-CAS penalty. The following CAS suffers
3488 // additional latency as we have another ST in the store buffer that must drain.
3490 if (EmitSync & 8192) {
3491 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3492 masm.get_thread (scrReg) ;
3493 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3494 masm.movptr(tmpReg, NULL_WORD); // consider: xor vs mov
3495 if (os::is_MP()) { masm.lock(); }
3496 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3497 } else
3498 if ((EmitSync & 128) == 0) { // avoid ST-before-CAS
3499 masm.movptr(scrReg, boxReg) ;
3500 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3502 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3503 if ((EmitSync & 2048) && VM_Version::supports_3dnow() && os::is_MP()) {
3504 // prefetchw [eax + Offset(_owner)-2]
3505 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3506 }
3508 if ((EmitSync & 64) == 0) {
3509 // Optimistic form: consider XORL tmpReg,tmpReg
3510 masm.movptr(tmpReg, NULL_WORD) ;
3511 } else {
3512 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3513 // Test-And-CAS instead of CAS
3514 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3515 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3516 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3517 }
3519 // Appears unlocked - try to swing _owner from null to non-null.
3520 // Ideally, I'd manifest "Self" with get_thread and then attempt
3521 // to CAS the register containing Self into m->Owner.
3522 // But we don't have enough registers, so instead we can either try to CAS
3523 // rsp or the address of the box (in scr) into &m->owner. If the CAS succeeds
3524 // we later store "Self" into m->Owner. Transiently storing a stack address
3525 // (rsp or the address of the box) into m->owner is harmless.
3526 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3527 if (os::is_MP()) { masm.lock(); }
3528 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3529 masm.movptr(Address(scrReg, 0), 3) ; // box->_displaced_header = 3
3530 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3531 masm.get_thread (scrReg) ; // beware: clobbers ICCs
3532 masm.movptr(Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2), scrReg) ;
3533 masm.xorptr(boxReg, boxReg) ; // set icc.ZFlag = 1 to indicate success
3535 // If the CAS fails we can either retry or pass control to the slow-path.
3536 // We use the latter tactic.
3537 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3538 // If the CAS was successful ...
3539 // Self has acquired the lock
3540 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3541 // Intentional fall-through into DONE_LABEL ...
3542 } else {
3543 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3544 masm.movptr(boxReg, tmpReg) ;
3546 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3547 if ((EmitSync & 2048) && VM_Version::supports_3dnow() && os::is_MP()) {
3548 // prefetchw [eax + Offset(_owner)-2]
3549 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3550 }
3552 if ((EmitSync & 64) == 0) {
3553 // Optimistic form
3554 masm.xorptr (tmpReg, tmpReg) ;
3555 } else {
3556 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3557 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3558 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3559 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3560 }
3562 // Appears unlocked - try to swing _owner from null to non-null.
3563 // Use either "Self" (in scr) or rsp as thread identity in _owner.
3564 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3565 masm.get_thread (scrReg) ;
3566 if (os::is_MP()) { masm.lock(); }
3567 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3569 // If the CAS fails we can either retry or pass control to the slow-path.
3570 // We use the latter tactic.
3571 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3572 // If the CAS was successful ...
3573 // Self has acquired the lock
3574 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3575 // Intentional fall-through into DONE_LABEL ...
3576 }
3578 // DONE_LABEL is a hot target - we'd really like to place it at the
3579 // start of cache line by padding with NOPs.
3580 // See the AMD and Intel software optimization manuals for the
3581 // most efficient "long" NOP encodings.
3582 // Unfortunately none of our alignment mechanisms suffice.
3583 masm.bind(DONE_LABEL);
3585 // Avoid branch-to-branch on AMD processors
3586 // This appears to be superstition.
3587 if (EmitSync & 32) masm.nop() ;
3590 // At DONE_LABEL the icc ZFlag is set as follows ...
3591 // Fast_Unlock uses the same protocol.
3592 // ZFlag == 1 -> Success
3593 // ZFlag == 0 -> Failure - force control through the slow-path
3594 }
3595 %}
3597 // obj: object to unlock
3598 // box: box address (displaced header location), killed. Must be EAX.
3599 // rbx,: killed tmp; cannot be obj nor box.
3600 //
3601 // Some commentary on balanced locking:
3602 //
3603 // Fast_Lock and Fast_Unlock are emitted only for provably balanced lock sites.
3604 // Methods that don't have provably balanced locking are forced to run in the
3605 // interpreter - such methods won't be compiled to use fast_lock and fast_unlock.
3606 // The interpreter provides two properties:
3607 // I1: At return-time the interpreter automatically and quietly unlocks any
3608 // objects acquired the current activation (frame). Recall that the
3609 // interpreter maintains an on-stack list of locks currently held by
3610 // a frame.
3611 // I2: If a method attempts to unlock an object that is not held by the
3612 // the frame the interpreter throws IMSX.
3613 //
3614 // Lets say A(), which has provably balanced locking, acquires O and then calls B().
3615 // B() doesn't have provably balanced locking so it runs in the interpreter.
3616 // Control returns to A() and A() unlocks O. By I1 and I2, above, we know that O
3617 // is still locked by A().
3618 //
3619 // The only other source of unbalanced locking would be JNI. The "Java Native Interface:
3620 // Programmer's Guide and Specification" claims that an object locked by jni_monitorenter
3621 // should not be unlocked by "normal" java-level locking and vice-versa. The specification
3622 // doesn't specify what will occur if a program engages in such mixed-mode locking, however.
3624 enc_class Fast_Unlock( nabxRegP obj, eAXRegP box, eRegP tmp) %{
3626 Register objReg = as_Register($obj$$reg);
3627 Register boxReg = as_Register($box$$reg);
3628 Register tmpReg = as_Register($tmp$$reg);
3630 guarantee (objReg != boxReg, "") ;
3631 guarantee (objReg != tmpReg, "") ;
3632 guarantee (boxReg != tmpReg, "") ;
3633 guarantee (boxReg == as_Register(EAX_enc), "") ;
3634 MacroAssembler masm(&cbuf);
3636 if (EmitSync & 4) {
3637 // Disable - inhibit all inlining. Force control through the slow-path
3638 masm.cmpptr (rsp, 0) ;
3639 } else
3640 if (EmitSync & 8) {
3641 Label DONE_LABEL ;
3642 if (UseBiasedLocking) {
3643 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3644 }
3645 // classic stack-locking code ...
3646 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3647 masm.testptr(tmpReg, tmpReg) ;
3648 masm.jcc (Assembler::zero, DONE_LABEL) ;
3649 if (os::is_MP()) { masm.lock(); }
3650 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3651 masm.bind(DONE_LABEL);
3652 } else {
3653 Label DONE_LABEL, Stacked, CheckSucc, Inflated ;
3655 // Critically, the biased locking test must have precedence over
3656 // and appear before the (box->dhw == 0) recursive stack-lock test.
3657 if (UseBiasedLocking && !UseOptoBiasInlining) {
3658 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3659 }
3661 masm.cmpptr(Address(boxReg, 0), 0) ; // Examine the displaced header
3662 masm.movptr(tmpReg, Address(objReg, 0)) ; // Examine the object's markword
3663 masm.jccb (Assembler::zero, DONE_LABEL) ; // 0 indicates recursive stack-lock
3665 masm.testptr(tmpReg, 0x02) ; // Inflated?
3666 masm.jccb (Assembler::zero, Stacked) ;
3668 masm.bind (Inflated) ;
3669 // It's inflated.
3670 // Despite our balanced locking property we still check that m->_owner == Self
3671 // as java routines or native JNI code called by this thread might
3672 // have released the lock.
3673 // Refer to the comments in synchronizer.cpp for how we might encode extra
3674 // state in _succ so we can avoid fetching EntryList|cxq.
3675 //
3676 // I'd like to add more cases in fast_lock() and fast_unlock() --
3677 // such as recursive enter and exit -- but we have to be wary of
3678 // I$ bloat, T$ effects and BP$ effects.
3679 //
3680 // If there's no contention try a 1-0 exit. That is, exit without
3681 // a costly MEMBAR or CAS. See synchronizer.cpp for details on how
3682 // we detect and recover from the race that the 1-0 exit admits.
3683 //
3684 // Conceptually Fast_Unlock() must execute a STST|LDST "release" barrier
3685 // before it STs null into _owner, releasing the lock. Updates
3686 // to data protected by the critical section must be visible before
3687 // we drop the lock (and thus before any other thread could acquire
3688 // the lock and observe the fields protected by the lock).
3689 // IA32's memory-model is SPO, so STs are ordered with respect to
3690 // each other and there's no need for an explicit barrier (fence).
3691 // See also http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
3693 masm.get_thread (boxReg) ;
3694 if ((EmitSync & 4096) && VM_Version::supports_3dnow() && os::is_MP()) {
3695 // prefetchw [ebx + Offset(_owner)-2]
3696 masm.prefetchw(Address(rbx, ObjectMonitor::owner_offset_in_bytes()-2));
3697 }
3699 // Note that we could employ various encoding schemes to reduce
3700 // the number of loads below (currently 4) to just 2 or 3.
3701 // Refer to the comments in synchronizer.cpp.
3702 // In practice the chain of fetches doesn't seem to impact performance, however.
3703 if ((EmitSync & 65536) == 0 && (EmitSync & 256)) {
3704 // Attempt to reduce branch density - AMD's branch predictor.
3705 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3706 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3707 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3708 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3709 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3710 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3711 masm.jmpb (DONE_LABEL) ;
3712 } else {
3713 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3714 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3715 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3716 masm.movptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3717 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3718 masm.jccb (Assembler::notZero, CheckSucc) ;
3719 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3720 masm.jmpb (DONE_LABEL) ;
3721 }
3723 // The Following code fragment (EmitSync & 65536) improves the performance of
3724 // contended applications and contended synchronization microbenchmarks.
3725 // Unfortunately the emission of the code - even though not executed - causes regressions
3726 // in scimark and jetstream, evidently because of $ effects. Replacing the code
3727 // with an equal number of never-executed NOPs results in the same regression.
3728 // We leave it off by default.
3730 if ((EmitSync & 65536) != 0) {
3731 Label LSuccess, LGoSlowPath ;
3733 masm.bind (CheckSucc) ;
3735 // Optional pre-test ... it's safe to elide this
3736 if ((EmitSync & 16) == 0) {
3737 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3738 masm.jccb (Assembler::zero, LGoSlowPath) ;
3739 }
3741 // We have a classic Dekker-style idiom:
3742 // ST m->_owner = 0 ; MEMBAR; LD m->_succ
3743 // There are a number of ways to implement the barrier:
3744 // (1) lock:andl &m->_owner, 0
3745 // is fast, but mask doesn't currently support the "ANDL M,IMM32" form.
3746 // LOCK: ANDL [ebx+Offset(_Owner)-2], 0
3747 // Encodes as 81 31 OFF32 IMM32 or 83 63 OFF8 IMM8
3748 // (2) If supported, an explicit MFENCE is appealing.
3749 // In older IA32 processors MFENCE is slower than lock:add or xchg
3750 // particularly if the write-buffer is full as might be the case if
3751 // if stores closely precede the fence or fence-equivalent instruction.
3752 // In more modern implementations MFENCE appears faster, however.
3753 // (3) In lieu of an explicit fence, use lock:addl to the top-of-stack
3754 // The $lines underlying the top-of-stack should be in M-state.
3755 // The locked add instruction is serializing, of course.
3756 // (4) Use xchg, which is serializing
3757 // mov boxReg, 0; xchgl boxReg, [tmpReg + Offset(_owner)-2] also works
3758 // (5) ST m->_owner = 0 and then execute lock:orl &m->_succ, 0.
3759 // The integer condition codes will tell us if succ was 0.
3760 // Since _succ and _owner should reside in the same $line and
3761 // we just stored into _owner, it's likely that the $line
3762 // remains in M-state for the lock:orl.
3763 //
3764 // We currently use (3), although it's likely that switching to (2)
3765 // is correct for the future.
3767 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3768 if (os::is_MP()) {
3769 if (VM_Version::supports_sse2() && 1 == FenceInstruction) {
3770 masm.mfence();
3771 } else {
3772 masm.lock () ; masm.addptr(Address(rsp, 0), 0) ;
3773 }
3774 }
3775 // Ratify _succ remains non-null
3776 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3777 masm.jccb (Assembler::notZero, LSuccess) ;
3779 masm.xorptr(boxReg, boxReg) ; // box is really EAX
3780 if (os::is_MP()) { masm.lock(); }
3781 masm.cmpxchgptr(rsp, Address(tmpReg, ObjectMonitor::owner_offset_in_bytes()-2));
3782 masm.jccb (Assembler::notEqual, LSuccess) ;
3783 // Since we're low on registers we installed rsp as a placeholding in _owner.
3784 // Now install Self over rsp. This is safe as we're transitioning from
3785 // non-null to non=null
3786 masm.get_thread (boxReg) ;
3787 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), boxReg) ;
3788 // Intentional fall-through into LGoSlowPath ...
3790 masm.bind (LGoSlowPath) ;
3791 masm.orptr(boxReg, 1) ; // set ICC.ZF=0 to indicate failure
3792 masm.jmpb (DONE_LABEL) ;
3794 masm.bind (LSuccess) ;
3795 masm.xorptr(boxReg, boxReg) ; // set ICC.ZF=1 to indicate success
3796 masm.jmpb (DONE_LABEL) ;
3797 }
3799 masm.bind (Stacked) ;
3800 // It's not inflated and it's not recursively stack-locked and it's not biased.
3801 // It must be stack-locked.
3802 // Try to reset the header to displaced header.
3803 // The "box" value on the stack is stable, so we can reload
3804 // and be assured we observe the same value as above.
3805 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3806 if (os::is_MP()) { masm.lock(); }
3807 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3808 // Intention fall-thru into DONE_LABEL
3811 // DONE_LABEL is a hot target - we'd really like to place it at the
3812 // start of cache line by padding with NOPs.
3813 // See the AMD and Intel software optimization manuals for the
3814 // most efficient "long" NOP encodings.
3815 // Unfortunately none of our alignment mechanisms suffice.
3816 if ((EmitSync & 65536) == 0) {
3817 masm.bind (CheckSucc) ;
3818 }
3819 masm.bind(DONE_LABEL);
3821 // Avoid branch to branch on AMD processors
3822 if (EmitSync & 32768) { masm.nop() ; }
3823 }
3824 %}
3827 enc_class enc_pop_rdx() %{
3828 emit_opcode(cbuf,0x5A);
3829 %}
3831 enc_class enc_rethrow() %{
3832 cbuf.set_insts_mark();
3833 emit_opcode(cbuf, 0xE9); // jmp entry
3834 emit_d32_reloc(cbuf, (int)OptoRuntime::rethrow_stub() - ((int)cbuf.insts_end())-4,
3835 runtime_call_Relocation::spec(), RELOC_IMM32 );
3836 %}
3839 // Convert a double to an int. Java semantics require we do complex
3840 // manglelations in the corner cases. So we set the rounding mode to
3841 // 'zero', store the darned double down as an int, and reset the
3842 // rounding mode to 'nearest'. The hardware throws an exception which
3843 // patches up the correct value directly to the stack.
3844 enc_class D2I_encoding( regD src ) %{
3845 // Flip to round-to-zero mode. We attempted to allow invalid-op
3846 // exceptions here, so that a NAN or other corner-case value will
3847 // thrown an exception (but normal values get converted at full speed).
3848 // However, I2C adapters and other float-stack manglers leave pending
3849 // invalid-op exceptions hanging. We would have to clear them before
3850 // enabling them and that is more expensive than just testing for the
3851 // invalid value Intel stores down in the corner cases.
3852 emit_opcode(cbuf,0xD9); // FLDCW trunc
3853 emit_opcode(cbuf,0x2D);
3854 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3855 // Allocate a word
3856 emit_opcode(cbuf,0x83); // SUB ESP,4
3857 emit_opcode(cbuf,0xEC);
3858 emit_d8(cbuf,0x04);
3859 // Encoding assumes a double has been pushed into FPR0.
3860 // Store down the double as an int, popping the FPU stack
3861 emit_opcode(cbuf,0xDB); // FISTP [ESP]
3862 emit_opcode(cbuf,0x1C);
3863 emit_d8(cbuf,0x24);
3864 // Restore the rounding mode; mask the exception
3865 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3866 emit_opcode(cbuf,0x2D);
3867 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3868 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3869 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3871 // Load the converted int; adjust CPU stack
3872 emit_opcode(cbuf,0x58); // POP EAX
3873 emit_opcode(cbuf,0x3D); // CMP EAX,imm
3874 emit_d32 (cbuf,0x80000000); // 0x80000000
3875 emit_opcode(cbuf,0x75); // JNE around_slow_call
3876 emit_d8 (cbuf,0x07); // Size of slow_call
3877 // Push src onto stack slow-path
3878 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3879 emit_d8 (cbuf,0xC0-1+$src$$reg );
3880 // CALL directly to the runtime
3881 cbuf.set_insts_mark();
3882 emit_opcode(cbuf,0xE8); // Call into runtime
3883 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3884 // Carry on here...
3885 %}
3887 enc_class D2L_encoding( regD src ) %{
3888 emit_opcode(cbuf,0xD9); // FLDCW trunc
3889 emit_opcode(cbuf,0x2D);
3890 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3891 // Allocate a word
3892 emit_opcode(cbuf,0x83); // SUB ESP,8
3893 emit_opcode(cbuf,0xEC);
3894 emit_d8(cbuf,0x08);
3895 // Encoding assumes a double has been pushed into FPR0.
3896 // Store down the double as a long, popping the FPU stack
3897 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3898 emit_opcode(cbuf,0x3C);
3899 emit_d8(cbuf,0x24);
3900 // Restore the rounding mode; mask the exception
3901 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3902 emit_opcode(cbuf,0x2D);
3903 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3904 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3905 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3907 // Load the converted int; adjust CPU stack
3908 emit_opcode(cbuf,0x58); // POP EAX
3909 emit_opcode(cbuf,0x5A); // POP EDX
3910 emit_opcode(cbuf,0x81); // CMP EDX,imm
3911 emit_d8 (cbuf,0xFA); // rdx
3912 emit_d32 (cbuf,0x80000000); // 0x80000000
3913 emit_opcode(cbuf,0x75); // JNE around_slow_call
3914 emit_d8 (cbuf,0x07+4); // Size of slow_call
3915 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3916 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3917 emit_opcode(cbuf,0x75); // JNE around_slow_call
3918 emit_d8 (cbuf,0x07); // Size of slow_call
3919 // Push src onto stack slow-path
3920 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3921 emit_d8 (cbuf,0xC0-1+$src$$reg );
3922 // CALL directly to the runtime
3923 cbuf.set_insts_mark();
3924 emit_opcode(cbuf,0xE8); // Call into runtime
3925 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3926 // Carry on here...
3927 %}
3929 enc_class X2L_encoding( regX src ) %{
3930 // Allocate a word
3931 emit_opcode(cbuf,0x83); // SUB ESP,8
3932 emit_opcode(cbuf,0xEC);
3933 emit_d8(cbuf,0x08);
3935 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3936 emit_opcode (cbuf, 0x0F );
3937 emit_opcode (cbuf, 0x11 );
3938 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3940 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3941 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3943 emit_opcode(cbuf,0xD9); // FLDCW trunc
3944 emit_opcode(cbuf,0x2D);
3945 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3947 // Encoding assumes a double has been pushed into FPR0.
3948 // Store down the double as a long, popping the FPU stack
3949 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3950 emit_opcode(cbuf,0x3C);
3951 emit_d8(cbuf,0x24);
3953 // Restore the rounding mode; mask the exception
3954 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3955 emit_opcode(cbuf,0x2D);
3956 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3957 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3958 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3960 // Load the converted int; adjust CPU stack
3961 emit_opcode(cbuf,0x58); // POP EAX
3963 emit_opcode(cbuf,0x5A); // POP EDX
3965 emit_opcode(cbuf,0x81); // CMP EDX,imm
3966 emit_d8 (cbuf,0xFA); // rdx
3967 emit_d32 (cbuf,0x80000000);// 0x80000000
3969 emit_opcode(cbuf,0x75); // JNE around_slow_call
3970 emit_d8 (cbuf,0x13+4); // Size of slow_call
3972 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3973 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3975 emit_opcode(cbuf,0x75); // JNE around_slow_call
3976 emit_d8 (cbuf,0x13); // Size of slow_call
3978 // Allocate a word
3979 emit_opcode(cbuf,0x83); // SUB ESP,4
3980 emit_opcode(cbuf,0xEC);
3981 emit_d8(cbuf,0x04);
3983 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3984 emit_opcode (cbuf, 0x0F );
3985 emit_opcode (cbuf, 0x11 );
3986 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3988 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3989 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3991 emit_opcode(cbuf,0x83); // ADD ESP,4
3992 emit_opcode(cbuf,0xC4);
3993 emit_d8(cbuf,0x04);
3995 // CALL directly to the runtime
3996 cbuf.set_insts_mark();
3997 emit_opcode(cbuf,0xE8); // Call into runtime
3998 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3999 // Carry on here...
4000 %}
4002 enc_class XD2L_encoding( regXD src ) %{
4003 // Allocate a word
4004 emit_opcode(cbuf,0x83); // SUB ESP,8
4005 emit_opcode(cbuf,0xEC);
4006 emit_d8(cbuf,0x08);
4008 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
4009 emit_opcode (cbuf, 0x0F );
4010 emit_opcode (cbuf, 0x11 );
4011 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4013 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
4014 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4016 emit_opcode(cbuf,0xD9); // FLDCW trunc
4017 emit_opcode(cbuf,0x2D);
4018 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
4020 // Encoding assumes a double has been pushed into FPR0.
4021 // Store down the double as a long, popping the FPU stack
4022 emit_opcode(cbuf,0xDF); // FISTP [ESP]
4023 emit_opcode(cbuf,0x3C);
4024 emit_d8(cbuf,0x24);
4026 // Restore the rounding mode; mask the exception
4027 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
4028 emit_opcode(cbuf,0x2D);
4029 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
4030 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
4031 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
4033 // Load the converted int; adjust CPU stack
4034 emit_opcode(cbuf,0x58); // POP EAX
4036 emit_opcode(cbuf,0x5A); // POP EDX
4038 emit_opcode(cbuf,0x81); // CMP EDX,imm
4039 emit_d8 (cbuf,0xFA); // rdx
4040 emit_d32 (cbuf,0x80000000); // 0x80000000
4042 emit_opcode(cbuf,0x75); // JNE around_slow_call
4043 emit_d8 (cbuf,0x13+4); // Size of slow_call
4045 emit_opcode(cbuf,0x85); // TEST EAX,EAX
4046 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
4048 emit_opcode(cbuf,0x75); // JNE around_slow_call
4049 emit_d8 (cbuf,0x13); // Size of slow_call
4051 // Push src onto stack slow-path
4052 // Allocate a word
4053 emit_opcode(cbuf,0x83); // SUB ESP,8
4054 emit_opcode(cbuf,0xEC);
4055 emit_d8(cbuf,0x08);
4057 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
4058 emit_opcode (cbuf, 0x0F );
4059 emit_opcode (cbuf, 0x11 );
4060 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4062 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
4063 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4065 emit_opcode(cbuf,0x83); // ADD ESP,8
4066 emit_opcode(cbuf,0xC4);
4067 emit_d8(cbuf,0x08);
4069 // CALL directly to the runtime
4070 cbuf.set_insts_mark();
4071 emit_opcode(cbuf,0xE8); // Call into runtime
4072 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
4073 // Carry on here...
4074 %}
4076 enc_class D2X_encoding( regX dst, regD src ) %{
4077 // Allocate a word
4078 emit_opcode(cbuf,0x83); // SUB ESP,4
4079 emit_opcode(cbuf,0xEC);
4080 emit_d8(cbuf,0x04);
4081 int pop = 0x02;
4082 if ($src$$reg != FPR1L_enc) {
4083 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
4084 emit_d8( cbuf, 0xC0-1+$src$$reg );
4085 pop = 0x03;
4086 }
4087 store_to_stackslot( cbuf, 0xD9, pop, 0 ); // FST<P>_S [ESP]
4089 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
4090 emit_opcode (cbuf, 0x0F );
4091 emit_opcode (cbuf, 0x10 );
4092 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
4094 emit_opcode(cbuf,0x83); // ADD ESP,4
4095 emit_opcode(cbuf,0xC4);
4096 emit_d8(cbuf,0x04);
4097 // Carry on here...
4098 %}
4100 enc_class FX2I_encoding( regX src, eRegI dst ) %{
4101 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
4103 // Compare the result to see if we need to go to the slow path
4104 emit_opcode(cbuf,0x81); // CMP dst,imm
4105 emit_rm (cbuf,0x3,0x7,$dst$$reg);
4106 emit_d32 (cbuf,0x80000000); // 0x80000000
4108 emit_opcode(cbuf,0x75); // JNE around_slow_call
4109 emit_d8 (cbuf,0x13); // Size of slow_call
4110 // Store xmm to a temp memory
4111 // location and push it onto stack.
4113 emit_opcode(cbuf,0x83); // SUB ESP,4
4114 emit_opcode(cbuf,0xEC);
4115 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4117 emit_opcode (cbuf, $primary ? 0xF2 : 0xF3 ); // MOVSS [ESP], xmm
4118 emit_opcode (cbuf, 0x0F );
4119 emit_opcode (cbuf, 0x11 );
4120 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4122 emit_opcode(cbuf, $primary ? 0xDD : 0xD9 ); // FLD [ESP]
4123 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4125 emit_opcode(cbuf,0x83); // ADD ESP,4
4126 emit_opcode(cbuf,0xC4);
4127 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4129 // CALL directly to the runtime
4130 cbuf.set_insts_mark();
4131 emit_opcode(cbuf,0xE8); // Call into runtime
4132 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
4134 // Carry on here...
4135 %}
4137 enc_class X2D_encoding( regD dst, regX src ) %{
4138 // Allocate a word
4139 emit_opcode(cbuf,0x83); // SUB ESP,4
4140 emit_opcode(cbuf,0xEC);
4141 emit_d8(cbuf,0x04);
4143 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], xmm
4144 emit_opcode (cbuf, 0x0F );
4145 emit_opcode (cbuf, 0x11 );
4146 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4148 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
4149 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4151 emit_opcode(cbuf,0x83); // ADD ESP,4
4152 emit_opcode(cbuf,0xC4);
4153 emit_d8(cbuf,0x04);
4155 // Carry on here...
4156 %}
4158 enc_class AbsXF_encoding(regX dst) %{
4159 address signmask_address=(address)float_signmask_pool;
4160 // andpd:\tANDPS $dst,[signconst]
4161 emit_opcode(cbuf, 0x0F);
4162 emit_opcode(cbuf, 0x54);
4163 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4164 emit_d32(cbuf, (int)signmask_address);
4165 %}
4167 enc_class AbsXD_encoding(regXD dst) %{
4168 address signmask_address=(address)double_signmask_pool;
4169 // andpd:\tANDPD $dst,[signconst]
4170 emit_opcode(cbuf, 0x66);
4171 emit_opcode(cbuf, 0x0F);
4172 emit_opcode(cbuf, 0x54);
4173 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4174 emit_d32(cbuf, (int)signmask_address);
4175 %}
4177 enc_class NegXF_encoding(regX dst) %{
4178 address signmask_address=(address)float_signflip_pool;
4179 // andpd:\tXORPS $dst,[signconst]
4180 emit_opcode(cbuf, 0x0F);
4181 emit_opcode(cbuf, 0x57);
4182 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4183 emit_d32(cbuf, (int)signmask_address);
4184 %}
4186 enc_class NegXD_encoding(regXD dst) %{
4187 address signmask_address=(address)double_signflip_pool;
4188 // andpd:\tXORPD $dst,[signconst]
4189 emit_opcode(cbuf, 0x66);
4190 emit_opcode(cbuf, 0x0F);
4191 emit_opcode(cbuf, 0x57);
4192 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4193 emit_d32(cbuf, (int)signmask_address);
4194 %}
4196 enc_class FMul_ST_reg( eRegF src1 ) %{
4197 // Operand was loaded from memory into fp ST (stack top)
4198 // FMUL ST,$src /* D8 C8+i */
4199 emit_opcode(cbuf, 0xD8);
4200 emit_opcode(cbuf, 0xC8 + $src1$$reg);
4201 %}
4203 enc_class FAdd_ST_reg( eRegF src2 ) %{
4204 // FADDP ST,src2 /* D8 C0+i */
4205 emit_opcode(cbuf, 0xD8);
4206 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4207 //could use FADDP src2,fpST /* DE C0+i */
4208 %}
4210 enc_class FAddP_reg_ST( eRegF src2 ) %{
4211 // FADDP src2,ST /* DE C0+i */
4212 emit_opcode(cbuf, 0xDE);
4213 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4214 %}
4216 enc_class subF_divF_encode( eRegF src1, eRegF src2) %{
4217 // Operand has been loaded into fp ST (stack top)
4218 // FSUB ST,$src1
4219 emit_opcode(cbuf, 0xD8);
4220 emit_opcode(cbuf, 0xE0 + $src1$$reg);
4222 // FDIV
4223 emit_opcode(cbuf, 0xD8);
4224 emit_opcode(cbuf, 0xF0 + $src2$$reg);
4225 %}
4227 enc_class MulFAddF (eRegF src1, eRegF src2) %{
4228 // Operand was loaded from memory into fp ST (stack top)
4229 // FADD ST,$src /* D8 C0+i */
4230 emit_opcode(cbuf, 0xD8);
4231 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4233 // FMUL ST,src2 /* D8 C*+i */
4234 emit_opcode(cbuf, 0xD8);
4235 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4236 %}
4239 enc_class MulFAddFreverse (eRegF src1, eRegF src2) %{
4240 // Operand was loaded from memory into fp ST (stack top)
4241 // FADD ST,$src /* D8 C0+i */
4242 emit_opcode(cbuf, 0xD8);
4243 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4245 // FMULP src2,ST /* DE C8+i */
4246 emit_opcode(cbuf, 0xDE);
4247 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4248 %}
4250 // Atomically load the volatile long
4251 enc_class enc_loadL_volatile( memory mem, stackSlotL dst ) %{
4252 emit_opcode(cbuf,0xDF);
4253 int rm_byte_opcode = 0x05;
4254 int base = $mem$$base;
4255 int index = $mem$$index;
4256 int scale = $mem$$scale;
4257 int displace = $mem$$disp;
4258 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4259 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4260 store_to_stackslot( cbuf, 0x0DF, 0x07, $dst$$disp );
4261 %}
4263 enc_class enc_loadLX_volatile( memory mem, stackSlotL dst, regXD tmp ) %{
4264 { // Atomic long load
4265 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4266 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4267 emit_opcode(cbuf,0x0F);
4268 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4269 int base = $mem$$base;
4270 int index = $mem$$index;
4271 int scale = $mem$$scale;
4272 int displace = $mem$$disp;
4273 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4274 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4275 }
4276 { // MOVSD $dst,$tmp ! atomic long store
4277 emit_opcode(cbuf,0xF2);
4278 emit_opcode(cbuf,0x0F);
4279 emit_opcode(cbuf,0x11);
4280 int base = $dst$$base;
4281 int index = $dst$$index;
4282 int scale = $dst$$scale;
4283 int displace = $dst$$disp;
4284 bool disp_is_oop = $dst->disp_is_oop(); // disp-as-oop when working with static globals
4285 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4286 }
4287 %}
4289 enc_class enc_loadLX_reg_volatile( memory mem, eRegL dst, regXD tmp ) %{
4290 { // Atomic long load
4291 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4292 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4293 emit_opcode(cbuf,0x0F);
4294 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4295 int base = $mem$$base;
4296 int index = $mem$$index;
4297 int scale = $mem$$scale;
4298 int displace = $mem$$disp;
4299 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4300 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4301 }
4302 { // MOVD $dst.lo,$tmp
4303 emit_opcode(cbuf,0x66);
4304 emit_opcode(cbuf,0x0F);
4305 emit_opcode(cbuf,0x7E);
4306 emit_rm(cbuf, 0x3, $tmp$$reg, $dst$$reg);
4307 }
4308 { // PSRLQ $tmp,32
4309 emit_opcode(cbuf,0x66);
4310 emit_opcode(cbuf,0x0F);
4311 emit_opcode(cbuf,0x73);
4312 emit_rm(cbuf, 0x3, 0x02, $tmp$$reg);
4313 emit_d8(cbuf, 0x20);
4314 }
4315 { // MOVD $dst.hi,$tmp
4316 emit_opcode(cbuf,0x66);
4317 emit_opcode(cbuf,0x0F);
4318 emit_opcode(cbuf,0x7E);
4319 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
4320 }
4321 %}
4323 // Volatile Store Long. Must be atomic, so move it into
4324 // the FP TOS and then do a 64-bit FIST. Has to probe the
4325 // target address before the store (for null-ptr checks)
4326 // so the memory operand is used twice in the encoding.
4327 enc_class enc_storeL_volatile( memory mem, stackSlotL src ) %{
4328 store_to_stackslot( cbuf, 0x0DF, 0x05, $src$$disp );
4329 cbuf.set_insts_mark(); // Mark start of FIST in case $mem has an oop
4330 emit_opcode(cbuf,0xDF);
4331 int rm_byte_opcode = 0x07;
4332 int base = $mem$$base;
4333 int index = $mem$$index;
4334 int scale = $mem$$scale;
4335 int displace = $mem$$disp;
4336 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4337 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4338 %}
4340 enc_class enc_storeLX_volatile( memory mem, stackSlotL src, regXD tmp) %{
4341 { // Atomic long load
4342 // UseXmmLoadAndClearUpper ? movsd $tmp,[$src] : movlpd $tmp,[$src]
4343 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4344 emit_opcode(cbuf,0x0F);
4345 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4346 int base = $src$$base;
4347 int index = $src$$index;
4348 int scale = $src$$scale;
4349 int displace = $src$$disp;
4350 bool disp_is_oop = $src->disp_is_oop(); // disp-as-oop when working with static globals
4351 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4352 }
4353 cbuf.set_insts_mark(); // Mark start of MOVSD in case $mem has an oop
4354 { // MOVSD $mem,$tmp ! atomic long store
4355 emit_opcode(cbuf,0xF2);
4356 emit_opcode(cbuf,0x0F);
4357 emit_opcode(cbuf,0x11);
4358 int base = $mem$$base;
4359 int index = $mem$$index;
4360 int scale = $mem$$scale;
4361 int displace = $mem$$disp;
4362 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4363 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4364 }
4365 %}
4367 enc_class enc_storeLX_reg_volatile( memory mem, eRegL src, regXD tmp, regXD tmp2) %{
4368 { // MOVD $tmp,$src.lo
4369 emit_opcode(cbuf,0x66);
4370 emit_opcode(cbuf,0x0F);
4371 emit_opcode(cbuf,0x6E);
4372 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
4373 }
4374 { // MOVD $tmp2,$src.hi
4375 emit_opcode(cbuf,0x66);
4376 emit_opcode(cbuf,0x0F);
4377 emit_opcode(cbuf,0x6E);
4378 emit_rm(cbuf, 0x3, $tmp2$$reg, HIGH_FROM_LOW($src$$reg));
4379 }
4380 { // PUNPCKLDQ $tmp,$tmp2
4381 emit_opcode(cbuf,0x66);
4382 emit_opcode(cbuf,0x0F);
4383 emit_opcode(cbuf,0x62);
4384 emit_rm(cbuf, 0x3, $tmp$$reg, $tmp2$$reg);
4385 }
4386 cbuf.set_insts_mark(); // Mark start of MOVSD in case $mem has an oop
4387 { // MOVSD $mem,$tmp ! atomic long store
4388 emit_opcode(cbuf,0xF2);
4389 emit_opcode(cbuf,0x0F);
4390 emit_opcode(cbuf,0x11);
4391 int base = $mem$$base;
4392 int index = $mem$$index;
4393 int scale = $mem$$scale;
4394 int displace = $mem$$disp;
4395 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4396 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4397 }
4398 %}
4400 // Safepoint Poll. This polls the safepoint page, and causes an
4401 // exception if it is not readable. Unfortunately, it kills the condition code
4402 // in the process
4403 // We current use TESTL [spp],EDI
4404 // A better choice might be TESTB [spp + pagesize() - CacheLineSize()],0
4406 enc_class Safepoint_Poll() %{
4407 cbuf.relocate(cbuf.insts_mark(), relocInfo::poll_type, 0);
4408 emit_opcode(cbuf,0x85);
4409 emit_rm (cbuf, 0x0, 0x7, 0x5);
4410 emit_d32(cbuf, (intptr_t)os::get_polling_page());
4411 %}
4412 %}
4415 //----------FRAME--------------------------------------------------------------
4416 // Definition of frame structure and management information.
4417 //
4418 // S T A C K L A Y O U T Allocators stack-slot number
4419 // | (to get allocators register number
4420 // G Owned by | | v add OptoReg::stack0())
4421 // r CALLER | |
4422 // o | +--------+ pad to even-align allocators stack-slot
4423 // w V | pad0 | numbers; owned by CALLER
4424 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned
4425 // h ^ | in | 5
4426 // | | args | 4 Holes in incoming args owned by SELF
4427 // | | | | 3
4428 // | | +--------+
4429 // V | | old out| Empty on Intel, window on Sparc
4430 // | old |preserve| Must be even aligned.
4431 // | SP-+--------+----> Matcher::_old_SP, even aligned
4432 // | | in | 3 area for Intel ret address
4433 // Owned by |preserve| Empty on Sparc.
4434 // SELF +--------+
4435 // | | pad2 | 2 pad to align old SP
4436 // | +--------+ 1
4437 // | | locks | 0
4438 // | +--------+----> OptoReg::stack0(), even aligned
4439 // | | pad1 | 11 pad to align new SP
4440 // | +--------+
4441 // | | | 10
4442 // | | spills | 9 spills
4443 // V | | 8 (pad0 slot for callee)
4444 // -----------+--------+----> Matcher::_out_arg_limit, unaligned
4445 // ^ | out | 7
4446 // | | args | 6 Holes in outgoing args owned by CALLEE
4447 // Owned by +--------+
4448 // CALLEE | new out| 6 Empty on Intel, window on Sparc
4449 // | new |preserve| Must be even-aligned.
4450 // | SP-+--------+----> Matcher::_new_SP, even aligned
4451 // | | |
4452 //
4453 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is
4454 // known from SELF's arguments and the Java calling convention.
4455 // Region 6-7 is determined per call site.
4456 // Note 2: If the calling convention leaves holes in the incoming argument
4457 // area, those holes are owned by SELF. Holes in the outgoing area
4458 // are owned by the CALLEE. Holes should not be nessecary in the
4459 // incoming area, as the Java calling convention is completely under
4460 // the control of the AD file. Doubles can be sorted and packed to
4461 // avoid holes. Holes in the outgoing arguments may be nessecary for
4462 // varargs C calling conventions.
4463 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is
4464 // even aligned with pad0 as needed.
4465 // Region 6 is even aligned. Region 6-7 is NOT even aligned;
4466 // region 6-11 is even aligned; it may be padded out more so that
4467 // the region from SP to FP meets the minimum stack alignment.
4469 frame %{
4470 // What direction does stack grow in (assumed to be same for C & Java)
4471 stack_direction(TOWARDS_LOW);
4473 // These three registers define part of the calling convention
4474 // between compiled code and the interpreter.
4475 inline_cache_reg(EAX); // Inline Cache Register
4476 interpreter_method_oop_reg(EBX); // Method Oop Register when calling interpreter
4478 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset]
4479 cisc_spilling_operand_name(indOffset32);
4481 // Number of stack slots consumed by locking an object
4482 sync_stack_slots(1);
4484 // Compiled code's Frame Pointer
4485 frame_pointer(ESP);
4486 // Interpreter stores its frame pointer in a register which is
4487 // stored to the stack by I2CAdaptors.
4488 // I2CAdaptors convert from interpreted java to compiled java.
4489 interpreter_frame_pointer(EBP);
4491 // Stack alignment requirement
4492 // Alignment size in bytes (128-bit -> 16 bytes)
4493 stack_alignment(StackAlignmentInBytes);
4495 // Number of stack slots between incoming argument block and the start of
4496 // a new frame. The PROLOG must add this many slots to the stack. The
4497 // EPILOG must remove this many slots. Intel needs one slot for
4498 // return address and one for rbp, (must save rbp)
4499 in_preserve_stack_slots(2+VerifyStackAtCalls);
4501 // Number of outgoing stack slots killed above the out_preserve_stack_slots
4502 // for calls to C. Supports the var-args backing area for register parms.
4503 varargs_C_out_slots_killed(0);
4505 // The after-PROLOG location of the return address. Location of
4506 // return address specifies a type (REG or STACK) and a number
4507 // representing the register number (i.e. - use a register name) or
4508 // stack slot.
4509 // Ret Addr is on stack in slot 0 if no locks or verification or alignment.
4510 // Otherwise, it is above the locks and verification slot and alignment word
4511 return_addr(STACK - 1 +
4512 round_to(1+VerifyStackAtCalls+
4513 Compile::current()->fixed_slots(),
4514 (StackAlignmentInBytes/wordSize)));
4516 // Body of function which returns an integer array locating
4517 // arguments either in registers or in stack slots. Passed an array
4518 // of ideal registers called "sig" and a "length" count. Stack-slot
4519 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4520 // arguments for a CALLEE. Incoming stack arguments are
4521 // automatically biased by the preserve_stack_slots field above.
4522 calling_convention %{
4523 // No difference between ingoing/outgoing just pass false
4524 SharedRuntime::java_calling_convention(sig_bt, regs, length, false);
4525 %}
4528 // Body of function which returns an integer array locating
4529 // arguments either in registers or in stack slots. Passed an array
4530 // of ideal registers called "sig" and a "length" count. Stack-slot
4531 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4532 // arguments for a CALLEE. Incoming stack arguments are
4533 // automatically biased by the preserve_stack_slots field above.
4534 c_calling_convention %{
4535 // This is obviously always outgoing
4536 (void) SharedRuntime::c_calling_convention(sig_bt, regs, length);
4537 %}
4539 // Location of C & interpreter return values
4540 c_return_value %{
4541 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4542 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4543 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4545 // in SSE2+ mode we want to keep the FPU stack clean so pretend
4546 // that C functions return float and double results in XMM0.
4547 if( ideal_reg == Op_RegD && UseSSE>=2 )
4548 return OptoRegPair(XMM0b_num,XMM0a_num);
4549 if( ideal_reg == Op_RegF && UseSSE>=2 )
4550 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4552 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4553 %}
4555 // Location of return values
4556 return_value %{
4557 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4558 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4559 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4560 if( ideal_reg == Op_RegD && UseSSE>=2 )
4561 return OptoRegPair(XMM0b_num,XMM0a_num);
4562 if( ideal_reg == Op_RegF && UseSSE>=1 )
4563 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4564 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4565 %}
4567 %}
4569 //----------ATTRIBUTES---------------------------------------------------------
4570 //----------Operand Attributes-------------------------------------------------
4571 op_attrib op_cost(0); // Required cost attribute
4573 //----------Instruction Attributes---------------------------------------------
4574 ins_attrib ins_cost(100); // Required cost attribute
4575 ins_attrib ins_size(8); // Required size attribute (in bits)
4576 ins_attrib ins_pc_relative(0); // Required PC Relative flag
4577 ins_attrib ins_short_branch(0); // Required flag: is this instruction a
4578 // non-matching short branch variant of some
4579 // long branch?
4580 ins_attrib ins_alignment(1); // Required alignment attribute (must be a power of 2)
4581 // specifies the alignment that some part of the instruction (not
4582 // necessarily the start) requires. If > 1, a compute_padding()
4583 // function must be provided for the instruction
4585 //----------OPERANDS-----------------------------------------------------------
4586 // Operand definitions must precede instruction definitions for correct parsing
4587 // in the ADLC because operands constitute user defined types which are used in
4588 // instruction definitions.
4590 //----------Simple Operands----------------------------------------------------
4591 // Immediate Operands
4592 // Integer Immediate
4593 operand immI() %{
4594 match(ConI);
4596 op_cost(10);
4597 format %{ %}
4598 interface(CONST_INTER);
4599 %}
4601 // Constant for test vs zero
4602 operand immI0() %{
4603 predicate(n->get_int() == 0);
4604 match(ConI);
4606 op_cost(0);
4607 format %{ %}
4608 interface(CONST_INTER);
4609 %}
4611 // Constant for increment
4612 operand immI1() %{
4613 predicate(n->get_int() == 1);
4614 match(ConI);
4616 op_cost(0);
4617 format %{ %}
4618 interface(CONST_INTER);
4619 %}
4621 // Constant for decrement
4622 operand immI_M1() %{
4623 predicate(n->get_int() == -1);
4624 match(ConI);
4626 op_cost(0);
4627 format %{ %}
4628 interface(CONST_INTER);
4629 %}
4631 // Valid scale values for addressing modes
4632 operand immI2() %{
4633 predicate(0 <= n->get_int() && (n->get_int() <= 3));
4634 match(ConI);
4636 format %{ %}
4637 interface(CONST_INTER);
4638 %}
4640 operand immI8() %{
4641 predicate((-128 <= n->get_int()) && (n->get_int() <= 127));
4642 match(ConI);
4644 op_cost(5);
4645 format %{ %}
4646 interface(CONST_INTER);
4647 %}
4649 operand immI16() %{
4650 predicate((-32768 <= n->get_int()) && (n->get_int() <= 32767));
4651 match(ConI);
4653 op_cost(10);
4654 format %{ %}
4655 interface(CONST_INTER);
4656 %}
4658 // Constant for long shifts
4659 operand immI_32() %{
4660 predicate( n->get_int() == 32 );
4661 match(ConI);
4663 op_cost(0);
4664 format %{ %}
4665 interface(CONST_INTER);
4666 %}
4668 operand immI_1_31() %{
4669 predicate( n->get_int() >= 1 && n->get_int() <= 31 );
4670 match(ConI);
4672 op_cost(0);
4673 format %{ %}
4674 interface(CONST_INTER);
4675 %}
4677 operand immI_32_63() %{
4678 predicate( n->get_int() >= 32 && n->get_int() <= 63 );
4679 match(ConI);
4680 op_cost(0);
4682 format %{ %}
4683 interface(CONST_INTER);
4684 %}
4686 operand immI_1() %{
4687 predicate( n->get_int() == 1 );
4688 match(ConI);
4690 op_cost(0);
4691 format %{ %}
4692 interface(CONST_INTER);
4693 %}
4695 operand immI_2() %{
4696 predicate( n->get_int() == 2 );
4697 match(ConI);
4699 op_cost(0);
4700 format %{ %}
4701 interface(CONST_INTER);
4702 %}
4704 operand immI_3() %{
4705 predicate( n->get_int() == 3 );
4706 match(ConI);
4708 op_cost(0);
4709 format %{ %}
4710 interface(CONST_INTER);
4711 %}
4713 // Pointer Immediate
4714 operand immP() %{
4715 match(ConP);
4717 op_cost(10);
4718 format %{ %}
4719 interface(CONST_INTER);
4720 %}
4722 // NULL Pointer Immediate
4723 operand immP0() %{
4724 predicate( n->get_ptr() == 0 );
4725 match(ConP);
4726 op_cost(0);
4728 format %{ %}
4729 interface(CONST_INTER);
4730 %}
4732 // Long Immediate
4733 operand immL() %{
4734 match(ConL);
4736 op_cost(20);
4737 format %{ %}
4738 interface(CONST_INTER);
4739 %}
4741 // Long Immediate zero
4742 operand immL0() %{
4743 predicate( n->get_long() == 0L );
4744 match(ConL);
4745 op_cost(0);
4747 format %{ %}
4748 interface(CONST_INTER);
4749 %}
4751 // Long Immediate zero
4752 operand immL_M1() %{
4753 predicate( n->get_long() == -1L );
4754 match(ConL);
4755 op_cost(0);
4757 format %{ %}
4758 interface(CONST_INTER);
4759 %}
4761 // Long immediate from 0 to 127.
4762 // Used for a shorter form of long mul by 10.
4763 operand immL_127() %{
4764 predicate((0 <= n->get_long()) && (n->get_long() <= 127));
4765 match(ConL);
4766 op_cost(0);
4768 format %{ %}
4769 interface(CONST_INTER);
4770 %}
4772 // Long Immediate: low 32-bit mask
4773 operand immL_32bits() %{
4774 predicate(n->get_long() == 0xFFFFFFFFL);
4775 match(ConL);
4776 op_cost(0);
4778 format %{ %}
4779 interface(CONST_INTER);
4780 %}
4782 // Long Immediate: low 32-bit mask
4783 operand immL32() %{
4784 predicate(n->get_long() == (int)(n->get_long()));
4785 match(ConL);
4786 op_cost(20);
4788 format %{ %}
4789 interface(CONST_INTER);
4790 %}
4792 //Double Immediate zero
4793 operand immD0() %{
4794 // Do additional (and counter-intuitive) test against NaN to work around VC++
4795 // bug that generates code such that NaNs compare equal to 0.0
4796 predicate( UseSSE<=1 && n->getd() == 0.0 && !g_isnan(n->getd()) );
4797 match(ConD);
4799 op_cost(5);
4800 format %{ %}
4801 interface(CONST_INTER);
4802 %}
4804 // Double Immediate
4805 operand immD1() %{
4806 predicate( UseSSE<=1 && n->getd() == 1.0 );
4807 match(ConD);
4809 op_cost(5);
4810 format %{ %}
4811 interface(CONST_INTER);
4812 %}
4814 // Double Immediate
4815 operand immD() %{
4816 predicate(UseSSE<=1);
4817 match(ConD);
4819 op_cost(5);
4820 format %{ %}
4821 interface(CONST_INTER);
4822 %}
4824 operand immXD() %{
4825 predicate(UseSSE>=2);
4826 match(ConD);
4828 op_cost(5);
4829 format %{ %}
4830 interface(CONST_INTER);
4831 %}
4833 // Double Immediate zero
4834 operand immXD0() %{
4835 // Do additional (and counter-intuitive) test against NaN to work around VC++
4836 // bug that generates code such that NaNs compare equal to 0.0 AND do not
4837 // compare equal to -0.0.
4838 predicate( UseSSE>=2 && jlong_cast(n->getd()) == 0 );
4839 match(ConD);
4841 format %{ %}
4842 interface(CONST_INTER);
4843 %}
4845 // Float Immediate zero
4846 operand immF0() %{
4847 predicate( UseSSE == 0 && n->getf() == 0.0 );
4848 match(ConF);
4850 op_cost(5);
4851 format %{ %}
4852 interface(CONST_INTER);
4853 %}
4855 // Float Immediate
4856 operand immF() %{
4857 predicate( UseSSE == 0 );
4858 match(ConF);
4860 op_cost(5);
4861 format %{ %}
4862 interface(CONST_INTER);
4863 %}
4865 // Float Immediate
4866 operand immXF() %{
4867 predicate(UseSSE >= 1);
4868 match(ConF);
4870 op_cost(5);
4871 format %{ %}
4872 interface(CONST_INTER);
4873 %}
4875 // Float Immediate zero. Zero and not -0.0
4876 operand immXF0() %{
4877 predicate( UseSSE >= 1 && jint_cast(n->getf()) == 0 );
4878 match(ConF);
4880 op_cost(5);
4881 format %{ %}
4882 interface(CONST_INTER);
4883 %}
4885 // Immediates for special shifts (sign extend)
4887 // Constants for increment
4888 operand immI_16() %{
4889 predicate( n->get_int() == 16 );
4890 match(ConI);
4892 format %{ %}
4893 interface(CONST_INTER);
4894 %}
4896 operand immI_24() %{
4897 predicate( n->get_int() == 24 );
4898 match(ConI);
4900 format %{ %}
4901 interface(CONST_INTER);
4902 %}
4904 // Constant for byte-wide masking
4905 operand immI_255() %{
4906 predicate( n->get_int() == 255 );
4907 match(ConI);
4909 format %{ %}
4910 interface(CONST_INTER);
4911 %}
4913 // Constant for short-wide masking
4914 operand immI_65535() %{
4915 predicate(n->get_int() == 65535);
4916 match(ConI);
4918 format %{ %}
4919 interface(CONST_INTER);
4920 %}
4922 // Register Operands
4923 // Integer Register
4924 operand eRegI() %{
4925 constraint(ALLOC_IN_RC(e_reg));
4926 match(RegI);
4927 match(xRegI);
4928 match(eAXRegI);
4929 match(eBXRegI);
4930 match(eCXRegI);
4931 match(eDXRegI);
4932 match(eDIRegI);
4933 match(eSIRegI);
4935 format %{ %}
4936 interface(REG_INTER);
4937 %}
4939 // Subset of Integer Register
4940 operand xRegI(eRegI reg) %{
4941 constraint(ALLOC_IN_RC(x_reg));
4942 match(reg);
4943 match(eAXRegI);
4944 match(eBXRegI);
4945 match(eCXRegI);
4946 match(eDXRegI);
4948 format %{ %}
4949 interface(REG_INTER);
4950 %}
4952 // Special Registers
4953 operand eAXRegI(xRegI reg) %{
4954 constraint(ALLOC_IN_RC(eax_reg));
4955 match(reg);
4956 match(eRegI);
4958 format %{ "EAX" %}
4959 interface(REG_INTER);
4960 %}
4962 // Special Registers
4963 operand eBXRegI(xRegI reg) %{
4964 constraint(ALLOC_IN_RC(ebx_reg));
4965 match(reg);
4966 match(eRegI);
4968 format %{ "EBX" %}
4969 interface(REG_INTER);
4970 %}
4972 operand eCXRegI(xRegI reg) %{
4973 constraint(ALLOC_IN_RC(ecx_reg));
4974 match(reg);
4975 match(eRegI);
4977 format %{ "ECX" %}
4978 interface(REG_INTER);
4979 %}
4981 operand eDXRegI(xRegI reg) %{
4982 constraint(ALLOC_IN_RC(edx_reg));
4983 match(reg);
4984 match(eRegI);
4986 format %{ "EDX" %}
4987 interface(REG_INTER);
4988 %}
4990 operand eDIRegI(xRegI reg) %{
4991 constraint(ALLOC_IN_RC(edi_reg));
4992 match(reg);
4993 match(eRegI);
4995 format %{ "EDI" %}
4996 interface(REG_INTER);
4997 %}
4999 operand naxRegI() %{
5000 constraint(ALLOC_IN_RC(nax_reg));
5001 match(RegI);
5002 match(eCXRegI);
5003 match(eDXRegI);
5004 match(eSIRegI);
5005 match(eDIRegI);
5007 format %{ %}
5008 interface(REG_INTER);
5009 %}
5011 operand nadxRegI() %{
5012 constraint(ALLOC_IN_RC(nadx_reg));
5013 match(RegI);
5014 match(eBXRegI);
5015 match(eCXRegI);
5016 match(eSIRegI);
5017 match(eDIRegI);
5019 format %{ %}
5020 interface(REG_INTER);
5021 %}
5023 operand ncxRegI() %{
5024 constraint(ALLOC_IN_RC(ncx_reg));
5025 match(RegI);
5026 match(eAXRegI);
5027 match(eDXRegI);
5028 match(eSIRegI);
5029 match(eDIRegI);
5031 format %{ %}
5032 interface(REG_INTER);
5033 %}
5035 // // This operand was used by cmpFastUnlock, but conflicted with 'object' reg
5036 // //
5037 operand eSIRegI(xRegI reg) %{
5038 constraint(ALLOC_IN_RC(esi_reg));
5039 match(reg);
5040 match(eRegI);
5042 format %{ "ESI" %}
5043 interface(REG_INTER);
5044 %}
5046 // Pointer Register
5047 operand anyRegP() %{
5048 constraint(ALLOC_IN_RC(any_reg));
5049 match(RegP);
5050 match(eAXRegP);
5051 match(eBXRegP);
5052 match(eCXRegP);
5053 match(eDIRegP);
5054 match(eRegP);
5056 format %{ %}
5057 interface(REG_INTER);
5058 %}
5060 operand eRegP() %{
5061 constraint(ALLOC_IN_RC(e_reg));
5062 match(RegP);
5063 match(eAXRegP);
5064 match(eBXRegP);
5065 match(eCXRegP);
5066 match(eDIRegP);
5068 format %{ %}
5069 interface(REG_INTER);
5070 %}
5072 // On windows95, EBP is not safe to use for implicit null tests.
5073 operand eRegP_no_EBP() %{
5074 constraint(ALLOC_IN_RC(e_reg_no_rbp));
5075 match(RegP);
5076 match(eAXRegP);
5077 match(eBXRegP);
5078 match(eCXRegP);
5079 match(eDIRegP);
5081 op_cost(100);
5082 format %{ %}
5083 interface(REG_INTER);
5084 %}
5086 operand naxRegP() %{
5087 constraint(ALLOC_IN_RC(nax_reg));
5088 match(RegP);
5089 match(eBXRegP);
5090 match(eDXRegP);
5091 match(eCXRegP);
5092 match(eSIRegP);
5093 match(eDIRegP);
5095 format %{ %}
5096 interface(REG_INTER);
5097 %}
5099 operand nabxRegP() %{
5100 constraint(ALLOC_IN_RC(nabx_reg));
5101 match(RegP);
5102 match(eCXRegP);
5103 match(eDXRegP);
5104 match(eSIRegP);
5105 match(eDIRegP);
5107 format %{ %}
5108 interface(REG_INTER);
5109 %}
5111 operand pRegP() %{
5112 constraint(ALLOC_IN_RC(p_reg));
5113 match(RegP);
5114 match(eBXRegP);
5115 match(eDXRegP);
5116 match(eSIRegP);
5117 match(eDIRegP);
5119 format %{ %}
5120 interface(REG_INTER);
5121 %}
5123 // Special Registers
5124 // Return a pointer value
5125 operand eAXRegP(eRegP reg) %{
5126 constraint(ALLOC_IN_RC(eax_reg));
5127 match(reg);
5128 format %{ "EAX" %}
5129 interface(REG_INTER);
5130 %}
5132 // Used in AtomicAdd
5133 operand eBXRegP(eRegP reg) %{
5134 constraint(ALLOC_IN_RC(ebx_reg));
5135 match(reg);
5136 format %{ "EBX" %}
5137 interface(REG_INTER);
5138 %}
5140 // Tail-call (interprocedural jump) to interpreter
5141 operand eCXRegP(eRegP reg) %{
5142 constraint(ALLOC_IN_RC(ecx_reg));
5143 match(reg);
5144 format %{ "ECX" %}
5145 interface(REG_INTER);
5146 %}
5148 operand eSIRegP(eRegP reg) %{
5149 constraint(ALLOC_IN_RC(esi_reg));
5150 match(reg);
5151 format %{ "ESI" %}
5152 interface(REG_INTER);
5153 %}
5155 // Used in rep stosw
5156 operand eDIRegP(eRegP reg) %{
5157 constraint(ALLOC_IN_RC(edi_reg));
5158 match(reg);
5159 format %{ "EDI" %}
5160 interface(REG_INTER);
5161 %}
5163 operand eBPRegP() %{
5164 constraint(ALLOC_IN_RC(ebp_reg));
5165 match(RegP);
5166 format %{ "EBP" %}
5167 interface(REG_INTER);
5168 %}
5170 operand eRegL() %{
5171 constraint(ALLOC_IN_RC(long_reg));
5172 match(RegL);
5173 match(eADXRegL);
5175 format %{ %}
5176 interface(REG_INTER);
5177 %}
5179 operand eADXRegL( eRegL reg ) %{
5180 constraint(ALLOC_IN_RC(eadx_reg));
5181 match(reg);
5183 format %{ "EDX:EAX" %}
5184 interface(REG_INTER);
5185 %}
5187 operand eBCXRegL( eRegL reg ) %{
5188 constraint(ALLOC_IN_RC(ebcx_reg));
5189 match(reg);
5191 format %{ "EBX:ECX" %}
5192 interface(REG_INTER);
5193 %}
5195 // Special case for integer high multiply
5196 operand eADXRegL_low_only() %{
5197 constraint(ALLOC_IN_RC(eadx_reg));
5198 match(RegL);
5200 format %{ "EAX" %}
5201 interface(REG_INTER);
5202 %}
5204 // Flags register, used as output of compare instructions
5205 operand eFlagsReg() %{
5206 constraint(ALLOC_IN_RC(int_flags));
5207 match(RegFlags);
5209 format %{ "EFLAGS" %}
5210 interface(REG_INTER);
5211 %}
5213 // Flags register, used as output of FLOATING POINT compare instructions
5214 operand eFlagsRegU() %{
5215 constraint(ALLOC_IN_RC(int_flags));
5216 match(RegFlags);
5218 format %{ "EFLAGS_U" %}
5219 interface(REG_INTER);
5220 %}
5222 operand eFlagsRegUCF() %{
5223 constraint(ALLOC_IN_RC(int_flags));
5224 match(RegFlags);
5225 predicate(false);
5227 format %{ "EFLAGS_U_CF" %}
5228 interface(REG_INTER);
5229 %}
5231 // Condition Code Register used by long compare
5232 operand flagsReg_long_LTGE() %{
5233 constraint(ALLOC_IN_RC(int_flags));
5234 match(RegFlags);
5235 format %{ "FLAGS_LTGE" %}
5236 interface(REG_INTER);
5237 %}
5238 operand flagsReg_long_EQNE() %{
5239 constraint(ALLOC_IN_RC(int_flags));
5240 match(RegFlags);
5241 format %{ "FLAGS_EQNE" %}
5242 interface(REG_INTER);
5243 %}
5244 operand flagsReg_long_LEGT() %{
5245 constraint(ALLOC_IN_RC(int_flags));
5246 match(RegFlags);
5247 format %{ "FLAGS_LEGT" %}
5248 interface(REG_INTER);
5249 %}
5251 // Float register operands
5252 operand regD() %{
5253 predicate( UseSSE < 2 );
5254 constraint(ALLOC_IN_RC(dbl_reg));
5255 match(RegD);
5256 match(regDPR1);
5257 match(regDPR2);
5258 format %{ %}
5259 interface(REG_INTER);
5260 %}
5262 operand regDPR1(regD reg) %{
5263 predicate( UseSSE < 2 );
5264 constraint(ALLOC_IN_RC(dbl_reg0));
5265 match(reg);
5266 format %{ "FPR1" %}
5267 interface(REG_INTER);
5268 %}
5270 operand regDPR2(regD reg) %{
5271 predicate( UseSSE < 2 );
5272 constraint(ALLOC_IN_RC(dbl_reg1));
5273 match(reg);
5274 format %{ "FPR2" %}
5275 interface(REG_INTER);
5276 %}
5278 operand regnotDPR1(regD reg) %{
5279 predicate( UseSSE < 2 );
5280 constraint(ALLOC_IN_RC(dbl_notreg0));
5281 match(reg);
5282 format %{ %}
5283 interface(REG_INTER);
5284 %}
5286 // XMM Double register operands
5287 operand regXD() %{
5288 predicate( UseSSE>=2 );
5289 constraint(ALLOC_IN_RC(xdb_reg));
5290 match(RegD);
5291 match(regXD6);
5292 match(regXD7);
5293 format %{ %}
5294 interface(REG_INTER);
5295 %}
5297 // XMM6 double register operands
5298 operand regXD6(regXD reg) %{
5299 predicate( UseSSE>=2 );
5300 constraint(ALLOC_IN_RC(xdb_reg6));
5301 match(reg);
5302 format %{ "XMM6" %}
5303 interface(REG_INTER);
5304 %}
5306 // XMM7 double register operands
5307 operand regXD7(regXD reg) %{
5308 predicate( UseSSE>=2 );
5309 constraint(ALLOC_IN_RC(xdb_reg7));
5310 match(reg);
5311 format %{ "XMM7" %}
5312 interface(REG_INTER);
5313 %}
5315 // Float register operands
5316 operand regF() %{
5317 predicate( UseSSE < 2 );
5318 constraint(ALLOC_IN_RC(flt_reg));
5319 match(RegF);
5320 match(regFPR1);
5321 format %{ %}
5322 interface(REG_INTER);
5323 %}
5325 // Float register operands
5326 operand regFPR1(regF reg) %{
5327 predicate( UseSSE < 2 );
5328 constraint(ALLOC_IN_RC(flt_reg0));
5329 match(reg);
5330 format %{ "FPR1" %}
5331 interface(REG_INTER);
5332 %}
5334 // XMM register operands
5335 operand regX() %{
5336 predicate( UseSSE>=1 );
5337 constraint(ALLOC_IN_RC(xmm_reg));
5338 match(RegF);
5339 format %{ %}
5340 interface(REG_INTER);
5341 %}
5344 //----------Memory Operands----------------------------------------------------
5345 // Direct Memory Operand
5346 operand direct(immP addr) %{
5347 match(addr);
5349 format %{ "[$addr]" %}
5350 interface(MEMORY_INTER) %{
5351 base(0xFFFFFFFF);
5352 index(0x4);
5353 scale(0x0);
5354 disp($addr);
5355 %}
5356 %}
5358 // Indirect Memory Operand
5359 operand indirect(eRegP reg) %{
5360 constraint(ALLOC_IN_RC(e_reg));
5361 match(reg);
5363 format %{ "[$reg]" %}
5364 interface(MEMORY_INTER) %{
5365 base($reg);
5366 index(0x4);
5367 scale(0x0);
5368 disp(0x0);
5369 %}
5370 %}
5372 // Indirect Memory Plus Short Offset Operand
5373 operand indOffset8(eRegP reg, immI8 off) %{
5374 match(AddP reg off);
5376 format %{ "[$reg + $off]" %}
5377 interface(MEMORY_INTER) %{
5378 base($reg);
5379 index(0x4);
5380 scale(0x0);
5381 disp($off);
5382 %}
5383 %}
5385 // Indirect Memory Plus Long Offset Operand
5386 operand indOffset32(eRegP reg, immI off) %{
5387 match(AddP reg off);
5389 format %{ "[$reg + $off]" %}
5390 interface(MEMORY_INTER) %{
5391 base($reg);
5392 index(0x4);
5393 scale(0x0);
5394 disp($off);
5395 %}
5396 %}
5398 // Indirect Memory Plus Long Offset Operand
5399 operand indOffset32X(eRegI reg, immP off) %{
5400 match(AddP off reg);
5402 format %{ "[$reg + $off]" %}
5403 interface(MEMORY_INTER) %{
5404 base($reg);
5405 index(0x4);
5406 scale(0x0);
5407 disp($off);
5408 %}
5409 %}
5411 // Indirect Memory Plus Index Register Plus Offset Operand
5412 operand indIndexOffset(eRegP reg, eRegI ireg, immI off) %{
5413 match(AddP (AddP reg ireg) off);
5415 op_cost(10);
5416 format %{"[$reg + $off + $ireg]" %}
5417 interface(MEMORY_INTER) %{
5418 base($reg);
5419 index($ireg);
5420 scale(0x0);
5421 disp($off);
5422 %}
5423 %}
5425 // Indirect Memory Plus Index Register Plus Offset Operand
5426 operand indIndex(eRegP reg, eRegI ireg) %{
5427 match(AddP reg ireg);
5429 op_cost(10);
5430 format %{"[$reg + $ireg]" %}
5431 interface(MEMORY_INTER) %{
5432 base($reg);
5433 index($ireg);
5434 scale(0x0);
5435 disp(0x0);
5436 %}
5437 %}
5439 // // -------------------------------------------------------------------------
5440 // // 486 architecture doesn't support "scale * index + offset" with out a base
5441 // // -------------------------------------------------------------------------
5442 // // Scaled Memory Operands
5443 // // Indirect Memory Times Scale Plus Offset Operand
5444 // operand indScaleOffset(immP off, eRegI ireg, immI2 scale) %{
5445 // match(AddP off (LShiftI ireg scale));
5446 //
5447 // op_cost(10);
5448 // format %{"[$off + $ireg << $scale]" %}
5449 // interface(MEMORY_INTER) %{
5450 // base(0x4);
5451 // index($ireg);
5452 // scale($scale);
5453 // disp($off);
5454 // %}
5455 // %}
5457 // Indirect Memory Times Scale Plus Index Register
5458 operand indIndexScale(eRegP reg, eRegI ireg, immI2 scale) %{
5459 match(AddP reg (LShiftI ireg scale));
5461 op_cost(10);
5462 format %{"[$reg + $ireg << $scale]" %}
5463 interface(MEMORY_INTER) %{
5464 base($reg);
5465 index($ireg);
5466 scale($scale);
5467 disp(0x0);
5468 %}
5469 %}
5471 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5472 operand indIndexScaleOffset(eRegP reg, immI off, eRegI ireg, immI2 scale) %{
5473 match(AddP (AddP reg (LShiftI ireg scale)) off);
5475 op_cost(10);
5476 format %{"[$reg + $off + $ireg << $scale]" %}
5477 interface(MEMORY_INTER) %{
5478 base($reg);
5479 index($ireg);
5480 scale($scale);
5481 disp($off);
5482 %}
5483 %}
5485 //----------Load Long Memory Operands------------------------------------------
5486 // The load-long idiom will use it's address expression again after loading
5487 // the first word of the long. If the load-long destination overlaps with
5488 // registers used in the addressing expression, the 2nd half will be loaded
5489 // from a clobbered address. Fix this by requiring that load-long use
5490 // address registers that do not overlap with the load-long target.
5492 // load-long support
5493 operand load_long_RegP() %{
5494 constraint(ALLOC_IN_RC(esi_reg));
5495 match(RegP);
5496 match(eSIRegP);
5497 op_cost(100);
5498 format %{ %}
5499 interface(REG_INTER);
5500 %}
5502 // Indirect Memory Operand Long
5503 operand load_long_indirect(load_long_RegP reg) %{
5504 constraint(ALLOC_IN_RC(esi_reg));
5505 match(reg);
5507 format %{ "[$reg]" %}
5508 interface(MEMORY_INTER) %{
5509 base($reg);
5510 index(0x4);
5511 scale(0x0);
5512 disp(0x0);
5513 %}
5514 %}
5516 // Indirect Memory Plus Long Offset Operand
5517 operand load_long_indOffset32(load_long_RegP reg, immI off) %{
5518 match(AddP reg off);
5520 format %{ "[$reg + $off]" %}
5521 interface(MEMORY_INTER) %{
5522 base($reg);
5523 index(0x4);
5524 scale(0x0);
5525 disp($off);
5526 %}
5527 %}
5529 opclass load_long_memory(load_long_indirect, load_long_indOffset32);
5532 //----------Special Memory Operands--------------------------------------------
5533 // Stack Slot Operand - This operand is used for loading and storing temporary
5534 // values on the stack where a match requires a value to
5535 // flow through memory.
5536 operand stackSlotP(sRegP reg) %{
5537 constraint(ALLOC_IN_RC(stack_slots));
5538 // No match rule because this operand is only generated in matching
5539 format %{ "[$reg]" %}
5540 interface(MEMORY_INTER) %{
5541 base(0x4); // ESP
5542 index(0x4); // No Index
5543 scale(0x0); // No Scale
5544 disp($reg); // Stack Offset
5545 %}
5546 %}
5548 operand stackSlotI(sRegI reg) %{
5549 constraint(ALLOC_IN_RC(stack_slots));
5550 // No match rule because this operand is only generated in matching
5551 format %{ "[$reg]" %}
5552 interface(MEMORY_INTER) %{
5553 base(0x4); // ESP
5554 index(0x4); // No Index
5555 scale(0x0); // No Scale
5556 disp($reg); // Stack Offset
5557 %}
5558 %}
5560 operand stackSlotF(sRegF reg) %{
5561 constraint(ALLOC_IN_RC(stack_slots));
5562 // No match rule because this operand is only generated in matching
5563 format %{ "[$reg]" %}
5564 interface(MEMORY_INTER) %{
5565 base(0x4); // ESP
5566 index(0x4); // No Index
5567 scale(0x0); // No Scale
5568 disp($reg); // Stack Offset
5569 %}
5570 %}
5572 operand stackSlotD(sRegD reg) %{
5573 constraint(ALLOC_IN_RC(stack_slots));
5574 // No match rule because this operand is only generated in matching
5575 format %{ "[$reg]" %}
5576 interface(MEMORY_INTER) %{
5577 base(0x4); // ESP
5578 index(0x4); // No Index
5579 scale(0x0); // No Scale
5580 disp($reg); // Stack Offset
5581 %}
5582 %}
5584 operand stackSlotL(sRegL reg) %{
5585 constraint(ALLOC_IN_RC(stack_slots));
5586 // No match rule because this operand is only generated in matching
5587 format %{ "[$reg]" %}
5588 interface(MEMORY_INTER) %{
5589 base(0x4); // ESP
5590 index(0x4); // No Index
5591 scale(0x0); // No Scale
5592 disp($reg); // Stack Offset
5593 %}
5594 %}
5596 //----------Memory Operands - Win95 Implicit Null Variants----------------
5597 // Indirect Memory Operand
5598 operand indirect_win95_safe(eRegP_no_EBP reg)
5599 %{
5600 constraint(ALLOC_IN_RC(e_reg));
5601 match(reg);
5603 op_cost(100);
5604 format %{ "[$reg]" %}
5605 interface(MEMORY_INTER) %{
5606 base($reg);
5607 index(0x4);
5608 scale(0x0);
5609 disp(0x0);
5610 %}
5611 %}
5613 // Indirect Memory Plus Short Offset Operand
5614 operand indOffset8_win95_safe(eRegP_no_EBP reg, immI8 off)
5615 %{
5616 match(AddP reg off);
5618 op_cost(100);
5619 format %{ "[$reg + $off]" %}
5620 interface(MEMORY_INTER) %{
5621 base($reg);
5622 index(0x4);
5623 scale(0x0);
5624 disp($off);
5625 %}
5626 %}
5628 // Indirect Memory Plus Long Offset Operand
5629 operand indOffset32_win95_safe(eRegP_no_EBP reg, immI off)
5630 %{
5631 match(AddP reg off);
5633 op_cost(100);
5634 format %{ "[$reg + $off]" %}
5635 interface(MEMORY_INTER) %{
5636 base($reg);
5637 index(0x4);
5638 scale(0x0);
5639 disp($off);
5640 %}
5641 %}
5643 // Indirect Memory Plus Index Register Plus Offset Operand
5644 operand indIndexOffset_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI off)
5645 %{
5646 match(AddP (AddP reg ireg) off);
5648 op_cost(100);
5649 format %{"[$reg + $off + $ireg]" %}
5650 interface(MEMORY_INTER) %{
5651 base($reg);
5652 index($ireg);
5653 scale(0x0);
5654 disp($off);
5655 %}
5656 %}
5658 // Indirect Memory Times Scale Plus Index Register
5659 operand indIndexScale_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI2 scale)
5660 %{
5661 match(AddP reg (LShiftI ireg scale));
5663 op_cost(100);
5664 format %{"[$reg + $ireg << $scale]" %}
5665 interface(MEMORY_INTER) %{
5666 base($reg);
5667 index($ireg);
5668 scale($scale);
5669 disp(0x0);
5670 %}
5671 %}
5673 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5674 operand indIndexScaleOffset_win95_safe(eRegP_no_EBP reg, immI off, eRegI ireg, immI2 scale)
5675 %{
5676 match(AddP (AddP reg (LShiftI ireg scale)) off);
5678 op_cost(100);
5679 format %{"[$reg + $off + $ireg << $scale]" %}
5680 interface(MEMORY_INTER) %{
5681 base($reg);
5682 index($ireg);
5683 scale($scale);
5684 disp($off);
5685 %}
5686 %}
5688 //----------Conditional Branch Operands----------------------------------------
5689 // Comparison Op - This is the operation of the comparison, and is limited to
5690 // the following set of codes:
5691 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=)
5692 //
5693 // Other attributes of the comparison, such as unsignedness, are specified
5694 // by the comparison instruction that sets a condition code flags register.
5695 // That result is represented by a flags operand whose subtype is appropriate
5696 // to the unsignedness (etc.) of the comparison.
5697 //
5698 // Later, the instruction which matches both the Comparison Op (a Bool) and
5699 // the flags (produced by the Cmp) specifies the coding of the comparison op
5700 // by matching a specific subtype of Bool operand below, such as cmpOpU.
5702 // Comparision Code
5703 operand cmpOp() %{
5704 match(Bool);
5706 format %{ "" %}
5707 interface(COND_INTER) %{
5708 equal(0x4, "e");
5709 not_equal(0x5, "ne");
5710 less(0xC, "l");
5711 greater_equal(0xD, "ge");
5712 less_equal(0xE, "le");
5713 greater(0xF, "g");
5714 %}
5715 %}
5717 // Comparison Code, unsigned compare. Used by FP also, with
5718 // C2 (unordered) turned into GT or LT already. The other bits
5719 // C0 and C3 are turned into Carry & Zero flags.
5720 operand cmpOpU() %{
5721 match(Bool);
5723 format %{ "" %}
5724 interface(COND_INTER) %{
5725 equal(0x4, "e");
5726 not_equal(0x5, "ne");
5727 less(0x2, "b");
5728 greater_equal(0x3, "nb");
5729 less_equal(0x6, "be");
5730 greater(0x7, "nbe");
5731 %}
5732 %}
5734 // Floating comparisons that don't require any fixup for the unordered case
5735 operand cmpOpUCF() %{
5736 match(Bool);
5737 predicate(n->as_Bool()->_test._test == BoolTest::lt ||
5738 n->as_Bool()->_test._test == BoolTest::ge ||
5739 n->as_Bool()->_test._test == BoolTest::le ||
5740 n->as_Bool()->_test._test == BoolTest::gt);
5741 format %{ "" %}
5742 interface(COND_INTER) %{
5743 equal(0x4, "e");
5744 not_equal(0x5, "ne");
5745 less(0x2, "b");
5746 greater_equal(0x3, "nb");
5747 less_equal(0x6, "be");
5748 greater(0x7, "nbe");
5749 %}
5750 %}
5753 // Floating comparisons that can be fixed up with extra conditional jumps
5754 operand cmpOpUCF2() %{
5755 match(Bool);
5756 predicate(n->as_Bool()->_test._test == BoolTest::ne ||
5757 n->as_Bool()->_test._test == BoolTest::eq);
5758 format %{ "" %}
5759 interface(COND_INTER) %{
5760 equal(0x4, "e");
5761 not_equal(0x5, "ne");
5762 less(0x2, "b");
5763 greater_equal(0x3, "nb");
5764 less_equal(0x6, "be");
5765 greater(0x7, "nbe");
5766 %}
5767 %}
5769 // Comparison Code for FP conditional move
5770 operand cmpOp_fcmov() %{
5771 match(Bool);
5773 format %{ "" %}
5774 interface(COND_INTER) %{
5775 equal (0x0C8);
5776 not_equal (0x1C8);
5777 less (0x0C0);
5778 greater_equal(0x1C0);
5779 less_equal (0x0D0);
5780 greater (0x1D0);
5781 %}
5782 %}
5784 // Comparision Code used in long compares
5785 operand cmpOp_commute() %{
5786 match(Bool);
5788 format %{ "" %}
5789 interface(COND_INTER) %{
5790 equal(0x4, "e");
5791 not_equal(0x5, "ne");
5792 less(0xF, "g");
5793 greater_equal(0xE, "le");
5794 less_equal(0xD, "ge");
5795 greater(0xC, "l");
5796 %}
5797 %}
5799 //----------OPERAND CLASSES----------------------------------------------------
5800 // Operand Classes are groups of operands that are used as to simplify
5801 // instruction definitions by not requiring the AD writer to specify separate
5802 // instructions for every form of operand when the instruction accepts
5803 // multiple operand types with the same basic encoding and format. The classic
5804 // case of this is memory operands.
5806 opclass memory(direct, indirect, indOffset8, indOffset32, indOffset32X, indIndexOffset,
5807 indIndex, indIndexScale, indIndexScaleOffset);
5809 // Long memory operations are encoded in 2 instructions and a +4 offset.
5810 // This means some kind of offset is always required and you cannot use
5811 // an oop as the offset (done when working on static globals).
5812 opclass long_memory(direct, indirect, indOffset8, indOffset32, indIndexOffset,
5813 indIndex, indIndexScale, indIndexScaleOffset);
5816 //----------PIPELINE-----------------------------------------------------------
5817 // Rules which define the behavior of the target architectures pipeline.
5818 pipeline %{
5820 //----------ATTRIBUTES---------------------------------------------------------
5821 attributes %{
5822 variable_size_instructions; // Fixed size instructions
5823 max_instructions_per_bundle = 3; // Up to 3 instructions per bundle
5824 instruction_unit_size = 1; // An instruction is 1 bytes long
5825 instruction_fetch_unit_size = 16; // The processor fetches one line
5826 instruction_fetch_units = 1; // of 16 bytes
5828 // List of nop instructions
5829 nops( MachNop );
5830 %}
5832 //----------RESOURCES----------------------------------------------------------
5833 // Resources are the functional units available to the machine
5835 // Generic P2/P3 pipeline
5836 // 3 decoders, only D0 handles big operands; a "bundle" is the limit of
5837 // 3 instructions decoded per cycle.
5838 // 2 load/store ops per cycle, 1 branch, 1 FPU,
5839 // 2 ALU op, only ALU0 handles mul/div instructions.
5840 resources( D0, D1, D2, DECODE = D0 | D1 | D2,
5841 MS0, MS1, MEM = MS0 | MS1,
5842 BR, FPU,
5843 ALU0, ALU1, ALU = ALU0 | ALU1 );
5845 //----------PIPELINE DESCRIPTION-----------------------------------------------
5846 // Pipeline Description specifies the stages in the machine's pipeline
5848 // Generic P2/P3 pipeline
5849 pipe_desc(S0, S1, S2, S3, S4, S5);
5851 //----------PIPELINE CLASSES---------------------------------------------------
5852 // Pipeline Classes describe the stages in which input and output are
5853 // referenced by the hardware pipeline.
5855 // Naming convention: ialu or fpu
5856 // Then: _reg
5857 // Then: _reg if there is a 2nd register
5858 // Then: _long if it's a pair of instructions implementing a long
5859 // Then: _fat if it requires the big decoder
5860 // Or: _mem if it requires the big decoder and a memory unit.
5862 // Integer ALU reg operation
5863 pipe_class ialu_reg(eRegI dst) %{
5864 single_instruction;
5865 dst : S4(write);
5866 dst : S3(read);
5867 DECODE : S0; // any decoder
5868 ALU : S3; // any alu
5869 %}
5871 // Long ALU reg operation
5872 pipe_class ialu_reg_long(eRegL dst) %{
5873 instruction_count(2);
5874 dst : S4(write);
5875 dst : S3(read);
5876 DECODE : S0(2); // any 2 decoders
5877 ALU : S3(2); // both alus
5878 %}
5880 // Integer ALU reg operation using big decoder
5881 pipe_class ialu_reg_fat(eRegI dst) %{
5882 single_instruction;
5883 dst : S4(write);
5884 dst : S3(read);
5885 D0 : S0; // big decoder only
5886 ALU : S3; // any alu
5887 %}
5889 // Long ALU reg operation using big decoder
5890 pipe_class ialu_reg_long_fat(eRegL dst) %{
5891 instruction_count(2);
5892 dst : S4(write);
5893 dst : S3(read);
5894 D0 : S0(2); // big decoder only; twice
5895 ALU : S3(2); // any 2 alus
5896 %}
5898 // Integer ALU reg-reg operation
5899 pipe_class ialu_reg_reg(eRegI dst, eRegI src) %{
5900 single_instruction;
5901 dst : S4(write);
5902 src : S3(read);
5903 DECODE : S0; // any decoder
5904 ALU : S3; // any alu
5905 %}
5907 // Long ALU reg-reg operation
5908 pipe_class ialu_reg_reg_long(eRegL dst, eRegL src) %{
5909 instruction_count(2);
5910 dst : S4(write);
5911 src : S3(read);
5912 DECODE : S0(2); // any 2 decoders
5913 ALU : S3(2); // both alus
5914 %}
5916 // Integer ALU reg-reg operation
5917 pipe_class ialu_reg_reg_fat(eRegI dst, memory src) %{
5918 single_instruction;
5919 dst : S4(write);
5920 src : S3(read);
5921 D0 : S0; // big decoder only
5922 ALU : S3; // any alu
5923 %}
5925 // Long ALU reg-reg operation
5926 pipe_class ialu_reg_reg_long_fat(eRegL dst, eRegL src) %{
5927 instruction_count(2);
5928 dst : S4(write);
5929 src : S3(read);
5930 D0 : S0(2); // big decoder only; twice
5931 ALU : S3(2); // both alus
5932 %}
5934 // Integer ALU reg-mem operation
5935 pipe_class ialu_reg_mem(eRegI dst, memory mem) %{
5936 single_instruction;
5937 dst : S5(write);
5938 mem : S3(read);
5939 D0 : S0; // big decoder only
5940 ALU : S4; // any alu
5941 MEM : S3; // any mem
5942 %}
5944 // Long ALU reg-mem operation
5945 pipe_class ialu_reg_long_mem(eRegL dst, load_long_memory mem) %{
5946 instruction_count(2);
5947 dst : S5(write);
5948 mem : S3(read);
5949 D0 : S0(2); // big decoder only; twice
5950 ALU : S4(2); // any 2 alus
5951 MEM : S3(2); // both mems
5952 %}
5954 // Integer mem operation (prefetch)
5955 pipe_class ialu_mem(memory mem)
5956 %{
5957 single_instruction;
5958 mem : S3(read);
5959 D0 : S0; // big decoder only
5960 MEM : S3; // any mem
5961 %}
5963 // Integer Store to Memory
5964 pipe_class ialu_mem_reg(memory mem, eRegI src) %{
5965 single_instruction;
5966 mem : S3(read);
5967 src : S5(read);
5968 D0 : S0; // big decoder only
5969 ALU : S4; // any alu
5970 MEM : S3;
5971 %}
5973 // Long Store to Memory
5974 pipe_class ialu_mem_long_reg(memory mem, eRegL src) %{
5975 instruction_count(2);
5976 mem : S3(read);
5977 src : S5(read);
5978 D0 : S0(2); // big decoder only; twice
5979 ALU : S4(2); // any 2 alus
5980 MEM : S3(2); // Both mems
5981 %}
5983 // Integer Store to Memory
5984 pipe_class ialu_mem_imm(memory mem) %{
5985 single_instruction;
5986 mem : S3(read);
5987 D0 : S0; // big decoder only
5988 ALU : S4; // any alu
5989 MEM : S3;
5990 %}
5992 // Integer ALU0 reg-reg operation
5993 pipe_class ialu_reg_reg_alu0(eRegI dst, eRegI src) %{
5994 single_instruction;
5995 dst : S4(write);
5996 src : S3(read);
5997 D0 : S0; // Big decoder only
5998 ALU0 : S3; // only alu0
5999 %}
6001 // Integer ALU0 reg-mem operation
6002 pipe_class ialu_reg_mem_alu0(eRegI dst, memory mem) %{
6003 single_instruction;
6004 dst : S5(write);
6005 mem : S3(read);
6006 D0 : S0; // big decoder only
6007 ALU0 : S4; // ALU0 only
6008 MEM : S3; // any mem
6009 %}
6011 // Integer ALU reg-reg operation
6012 pipe_class ialu_cr_reg_reg(eFlagsReg cr, eRegI src1, eRegI src2) %{
6013 single_instruction;
6014 cr : S4(write);
6015 src1 : S3(read);
6016 src2 : S3(read);
6017 DECODE : S0; // any decoder
6018 ALU : S3; // any alu
6019 %}
6021 // Integer ALU reg-imm operation
6022 pipe_class ialu_cr_reg_imm(eFlagsReg cr, eRegI src1) %{
6023 single_instruction;
6024 cr : S4(write);
6025 src1 : S3(read);
6026 DECODE : S0; // any decoder
6027 ALU : S3; // any alu
6028 %}
6030 // Integer ALU reg-mem operation
6031 pipe_class ialu_cr_reg_mem(eFlagsReg cr, eRegI src1, memory src2) %{
6032 single_instruction;
6033 cr : S4(write);
6034 src1 : S3(read);
6035 src2 : S3(read);
6036 D0 : S0; // big decoder only
6037 ALU : S4; // any alu
6038 MEM : S3;
6039 %}
6041 // Conditional move reg-reg
6042 pipe_class pipe_cmplt( eRegI p, eRegI q, eRegI y ) %{
6043 instruction_count(4);
6044 y : S4(read);
6045 q : S3(read);
6046 p : S3(read);
6047 DECODE : S0(4); // any decoder
6048 %}
6050 // Conditional move reg-reg
6051 pipe_class pipe_cmov_reg( eRegI dst, eRegI src, eFlagsReg cr ) %{
6052 single_instruction;
6053 dst : S4(write);
6054 src : S3(read);
6055 cr : S3(read);
6056 DECODE : S0; // any decoder
6057 %}
6059 // Conditional move reg-mem
6060 pipe_class pipe_cmov_mem( eFlagsReg cr, eRegI dst, memory src) %{
6061 single_instruction;
6062 dst : S4(write);
6063 src : S3(read);
6064 cr : S3(read);
6065 DECODE : S0; // any decoder
6066 MEM : S3;
6067 %}
6069 // Conditional move reg-reg long
6070 pipe_class pipe_cmov_reg_long( eFlagsReg cr, eRegL dst, eRegL src) %{
6071 single_instruction;
6072 dst : S4(write);
6073 src : S3(read);
6074 cr : S3(read);
6075 DECODE : S0(2); // any 2 decoders
6076 %}
6078 // Conditional move double reg-reg
6079 pipe_class pipe_cmovD_reg( eFlagsReg cr, regDPR1 dst, regD src) %{
6080 single_instruction;
6081 dst : S4(write);
6082 src : S3(read);
6083 cr : S3(read);
6084 DECODE : S0; // any decoder
6085 %}
6087 // Float reg-reg operation
6088 pipe_class fpu_reg(regD dst) %{
6089 instruction_count(2);
6090 dst : S3(read);
6091 DECODE : S0(2); // any 2 decoders
6092 FPU : S3;
6093 %}
6095 // Float reg-reg operation
6096 pipe_class fpu_reg_reg(regD dst, regD src) %{
6097 instruction_count(2);
6098 dst : S4(write);
6099 src : S3(read);
6100 DECODE : S0(2); // any 2 decoders
6101 FPU : S3;
6102 %}
6104 // Float reg-reg operation
6105 pipe_class fpu_reg_reg_reg(regD dst, regD src1, regD src2) %{
6106 instruction_count(3);
6107 dst : S4(write);
6108 src1 : S3(read);
6109 src2 : S3(read);
6110 DECODE : S0(3); // any 3 decoders
6111 FPU : S3(2);
6112 %}
6114 // Float reg-reg operation
6115 pipe_class fpu_reg_reg_reg_reg(regD dst, regD src1, regD src2, regD src3) %{
6116 instruction_count(4);
6117 dst : S4(write);
6118 src1 : S3(read);
6119 src2 : S3(read);
6120 src3 : S3(read);
6121 DECODE : S0(4); // any 3 decoders
6122 FPU : S3(2);
6123 %}
6125 // Float reg-reg operation
6126 pipe_class fpu_reg_mem_reg_reg(regD dst, memory src1, regD src2, regD src3) %{
6127 instruction_count(4);
6128 dst : S4(write);
6129 src1 : S3(read);
6130 src2 : S3(read);
6131 src3 : S3(read);
6132 DECODE : S1(3); // any 3 decoders
6133 D0 : S0; // Big decoder only
6134 FPU : S3(2);
6135 MEM : S3;
6136 %}
6138 // Float reg-mem operation
6139 pipe_class fpu_reg_mem(regD dst, memory mem) %{
6140 instruction_count(2);
6141 dst : S5(write);
6142 mem : S3(read);
6143 D0 : S0; // big decoder only
6144 DECODE : S1; // any decoder for FPU POP
6145 FPU : S4;
6146 MEM : S3; // any mem
6147 %}
6149 // Float reg-mem operation
6150 pipe_class fpu_reg_reg_mem(regD dst, regD src1, memory mem) %{
6151 instruction_count(3);
6152 dst : S5(write);
6153 src1 : S3(read);
6154 mem : S3(read);
6155 D0 : S0; // big decoder only
6156 DECODE : S1(2); // any decoder for FPU POP
6157 FPU : S4;
6158 MEM : S3; // any mem
6159 %}
6161 // Float mem-reg operation
6162 pipe_class fpu_mem_reg(memory mem, regD src) %{
6163 instruction_count(2);
6164 src : S5(read);
6165 mem : S3(read);
6166 DECODE : S0; // any decoder for FPU PUSH
6167 D0 : S1; // big decoder only
6168 FPU : S4;
6169 MEM : S3; // any mem
6170 %}
6172 pipe_class fpu_mem_reg_reg(memory mem, regD src1, regD src2) %{
6173 instruction_count(3);
6174 src1 : S3(read);
6175 src2 : S3(read);
6176 mem : S3(read);
6177 DECODE : S0(2); // any decoder for FPU PUSH
6178 D0 : S1; // big decoder only
6179 FPU : S4;
6180 MEM : S3; // any mem
6181 %}
6183 pipe_class fpu_mem_reg_mem(memory mem, regD src1, memory src2) %{
6184 instruction_count(3);
6185 src1 : S3(read);
6186 src2 : S3(read);
6187 mem : S4(read);
6188 DECODE : S0; // any decoder for FPU PUSH
6189 D0 : S0(2); // big decoder only
6190 FPU : S4;
6191 MEM : S3(2); // any mem
6192 %}
6194 pipe_class fpu_mem_mem(memory dst, memory src1) %{
6195 instruction_count(2);
6196 src1 : S3(read);
6197 dst : S4(read);
6198 D0 : S0(2); // big decoder only
6199 MEM : S3(2); // any mem
6200 %}
6202 pipe_class fpu_mem_mem_mem(memory dst, memory src1, memory src2) %{
6203 instruction_count(3);
6204 src1 : S3(read);
6205 src2 : S3(read);
6206 dst : S4(read);
6207 D0 : S0(3); // big decoder only
6208 FPU : S4;
6209 MEM : S3(3); // any mem
6210 %}
6212 pipe_class fpu_mem_reg_con(memory mem, regD src1) %{
6213 instruction_count(3);
6214 src1 : S4(read);
6215 mem : S4(read);
6216 DECODE : S0; // any decoder for FPU PUSH
6217 D0 : S0(2); // big decoder only
6218 FPU : S4;
6219 MEM : S3(2); // any mem
6220 %}
6222 // Float load constant
6223 pipe_class fpu_reg_con(regD dst) %{
6224 instruction_count(2);
6225 dst : S5(write);
6226 D0 : S0; // big decoder only for the load
6227 DECODE : S1; // any decoder for FPU POP
6228 FPU : S4;
6229 MEM : S3; // any mem
6230 %}
6232 // Float load constant
6233 pipe_class fpu_reg_reg_con(regD dst, regD src) %{
6234 instruction_count(3);
6235 dst : S5(write);
6236 src : S3(read);
6237 D0 : S0; // big decoder only for the load
6238 DECODE : S1(2); // any decoder for FPU POP
6239 FPU : S4;
6240 MEM : S3; // any mem
6241 %}
6243 // UnConditional branch
6244 pipe_class pipe_jmp( label labl ) %{
6245 single_instruction;
6246 BR : S3;
6247 %}
6249 // Conditional branch
6250 pipe_class pipe_jcc( cmpOp cmp, eFlagsReg cr, label labl ) %{
6251 single_instruction;
6252 cr : S1(read);
6253 BR : S3;
6254 %}
6256 // Allocation idiom
6257 pipe_class pipe_cmpxchg( eRegP dst, eRegP heap_ptr ) %{
6258 instruction_count(1); force_serialization;
6259 fixed_latency(6);
6260 heap_ptr : S3(read);
6261 DECODE : S0(3);
6262 D0 : S2;
6263 MEM : S3;
6264 ALU : S3(2);
6265 dst : S5(write);
6266 BR : S5;
6267 %}
6269 // Generic big/slow expanded idiom
6270 pipe_class pipe_slow( ) %{
6271 instruction_count(10); multiple_bundles; force_serialization;
6272 fixed_latency(100);
6273 D0 : S0(2);
6274 MEM : S3(2);
6275 %}
6277 // The real do-nothing guy
6278 pipe_class empty( ) %{
6279 instruction_count(0);
6280 %}
6282 // Define the class for the Nop node
6283 define %{
6284 MachNop = empty;
6285 %}
6287 %}
6289 //----------INSTRUCTIONS-------------------------------------------------------
6290 //
6291 // match -- States which machine-independent subtree may be replaced
6292 // by this instruction.
6293 // ins_cost -- The estimated cost of this instruction is used by instruction
6294 // selection to identify a minimum cost tree of machine
6295 // instructions that matches a tree of machine-independent
6296 // instructions.
6297 // format -- A string providing the disassembly for this instruction.
6298 // The value of an instruction's operand may be inserted
6299 // by referring to it with a '$' prefix.
6300 // opcode -- Three instruction opcodes may be provided. These are referred
6301 // to within an encode class as $primary, $secondary, and $tertiary
6302 // respectively. The primary opcode is commonly used to
6303 // indicate the type of machine instruction, while secondary
6304 // and tertiary are often used for prefix options or addressing
6305 // modes.
6306 // ins_encode -- A list of encode classes with parameters. The encode class
6307 // name must have been defined in an 'enc_class' specification
6308 // in the encode section of the architecture description.
6310 //----------BSWAP-Instruction--------------------------------------------------
6311 instruct bytes_reverse_int(eRegI dst) %{
6312 match(Set dst (ReverseBytesI dst));
6314 format %{ "BSWAP $dst" %}
6315 opcode(0x0F, 0xC8);
6316 ins_encode( OpcP, OpcSReg(dst) );
6317 ins_pipe( ialu_reg );
6318 %}
6320 instruct bytes_reverse_long(eRegL dst) %{
6321 match(Set dst (ReverseBytesL dst));
6323 format %{ "BSWAP $dst.lo\n\t"
6324 "BSWAP $dst.hi\n\t"
6325 "XCHG $dst.lo $dst.hi" %}
6327 ins_cost(125);
6328 ins_encode( bswap_long_bytes(dst) );
6329 ins_pipe( ialu_reg_reg);
6330 %}
6332 instruct bytes_reverse_unsigned_short(eRegI dst) %{
6333 match(Set dst (ReverseBytesUS dst));
6335 format %{ "BSWAP $dst\n\t"
6336 "SHR $dst,16\n\t" %}
6337 ins_encode %{
6338 __ bswapl($dst$$Register);
6339 __ shrl($dst$$Register, 16);
6340 %}
6341 ins_pipe( ialu_reg );
6342 %}
6344 instruct bytes_reverse_short(eRegI dst) %{
6345 match(Set dst (ReverseBytesS dst));
6347 format %{ "BSWAP $dst\n\t"
6348 "SAR $dst,16\n\t" %}
6349 ins_encode %{
6350 __ bswapl($dst$$Register);
6351 __ sarl($dst$$Register, 16);
6352 %}
6353 ins_pipe( ialu_reg );
6354 %}
6357 //---------- Zeros Count Instructions ------------------------------------------
6359 instruct countLeadingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6360 predicate(UseCountLeadingZerosInstruction);
6361 match(Set dst (CountLeadingZerosI src));
6362 effect(KILL cr);
6364 format %{ "LZCNT $dst, $src\t# count leading zeros (int)" %}
6365 ins_encode %{
6366 __ lzcntl($dst$$Register, $src$$Register);
6367 %}
6368 ins_pipe(ialu_reg);
6369 %}
6371 instruct countLeadingZerosI_bsr(eRegI dst, eRegI src, eFlagsReg cr) %{
6372 predicate(!UseCountLeadingZerosInstruction);
6373 match(Set dst (CountLeadingZerosI src));
6374 effect(KILL cr);
6376 format %{ "BSR $dst, $src\t# count leading zeros (int)\n\t"
6377 "JNZ skip\n\t"
6378 "MOV $dst, -1\n"
6379 "skip:\n\t"
6380 "NEG $dst\n\t"
6381 "ADD $dst, 31" %}
6382 ins_encode %{
6383 Register Rdst = $dst$$Register;
6384 Register Rsrc = $src$$Register;
6385 Label skip;
6386 __ bsrl(Rdst, Rsrc);
6387 __ jccb(Assembler::notZero, skip);
6388 __ movl(Rdst, -1);
6389 __ bind(skip);
6390 __ negl(Rdst);
6391 __ addl(Rdst, BitsPerInt - 1);
6392 %}
6393 ins_pipe(ialu_reg);
6394 %}
6396 instruct countLeadingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6397 predicate(UseCountLeadingZerosInstruction);
6398 match(Set dst (CountLeadingZerosL src));
6399 effect(TEMP dst, KILL cr);
6401 format %{ "LZCNT $dst, $src.hi\t# count leading zeros (long)\n\t"
6402 "JNC done\n\t"
6403 "LZCNT $dst, $src.lo\n\t"
6404 "ADD $dst, 32\n"
6405 "done:" %}
6406 ins_encode %{
6407 Register Rdst = $dst$$Register;
6408 Register Rsrc = $src$$Register;
6409 Label done;
6410 __ lzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
6411 __ jccb(Assembler::carryClear, done);
6412 __ lzcntl(Rdst, Rsrc);
6413 __ addl(Rdst, BitsPerInt);
6414 __ bind(done);
6415 %}
6416 ins_pipe(ialu_reg);
6417 %}
6419 instruct countLeadingZerosL_bsr(eRegI dst, eRegL src, eFlagsReg cr) %{
6420 predicate(!UseCountLeadingZerosInstruction);
6421 match(Set dst (CountLeadingZerosL src));
6422 effect(TEMP dst, KILL cr);
6424 format %{ "BSR $dst, $src.hi\t# count leading zeros (long)\n\t"
6425 "JZ msw_is_zero\n\t"
6426 "ADD $dst, 32\n\t"
6427 "JMP not_zero\n"
6428 "msw_is_zero:\n\t"
6429 "BSR $dst, $src.lo\n\t"
6430 "JNZ not_zero\n\t"
6431 "MOV $dst, -1\n"
6432 "not_zero:\n\t"
6433 "NEG $dst\n\t"
6434 "ADD $dst, 63\n" %}
6435 ins_encode %{
6436 Register Rdst = $dst$$Register;
6437 Register Rsrc = $src$$Register;
6438 Label msw_is_zero;
6439 Label not_zero;
6440 __ bsrl(Rdst, HIGH_FROM_LOW(Rsrc));
6441 __ jccb(Assembler::zero, msw_is_zero);
6442 __ addl(Rdst, BitsPerInt);
6443 __ jmpb(not_zero);
6444 __ bind(msw_is_zero);
6445 __ bsrl(Rdst, Rsrc);
6446 __ jccb(Assembler::notZero, not_zero);
6447 __ movl(Rdst, -1);
6448 __ bind(not_zero);
6449 __ negl(Rdst);
6450 __ addl(Rdst, BitsPerLong - 1);
6451 %}
6452 ins_pipe(ialu_reg);
6453 %}
6455 instruct countTrailingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6456 match(Set dst (CountTrailingZerosI src));
6457 effect(KILL cr);
6459 format %{ "BSF $dst, $src\t# count trailing zeros (int)\n\t"
6460 "JNZ done\n\t"
6461 "MOV $dst, 32\n"
6462 "done:" %}
6463 ins_encode %{
6464 Register Rdst = $dst$$Register;
6465 Label done;
6466 __ bsfl(Rdst, $src$$Register);
6467 __ jccb(Assembler::notZero, done);
6468 __ movl(Rdst, BitsPerInt);
6469 __ bind(done);
6470 %}
6471 ins_pipe(ialu_reg);
6472 %}
6474 instruct countTrailingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6475 match(Set dst (CountTrailingZerosL src));
6476 effect(TEMP dst, KILL cr);
6478 format %{ "BSF $dst, $src.lo\t# count trailing zeros (long)\n\t"
6479 "JNZ done\n\t"
6480 "BSF $dst, $src.hi\n\t"
6481 "JNZ msw_not_zero\n\t"
6482 "MOV $dst, 32\n"
6483 "msw_not_zero:\n\t"
6484 "ADD $dst, 32\n"
6485 "done:" %}
6486 ins_encode %{
6487 Register Rdst = $dst$$Register;
6488 Register Rsrc = $src$$Register;
6489 Label msw_not_zero;
6490 Label done;
6491 __ bsfl(Rdst, Rsrc);
6492 __ jccb(Assembler::notZero, done);
6493 __ bsfl(Rdst, HIGH_FROM_LOW(Rsrc));
6494 __ jccb(Assembler::notZero, msw_not_zero);
6495 __ movl(Rdst, BitsPerInt);
6496 __ bind(msw_not_zero);
6497 __ addl(Rdst, BitsPerInt);
6498 __ bind(done);
6499 %}
6500 ins_pipe(ialu_reg);
6501 %}
6504 //---------- Population Count Instructions -------------------------------------
6506 instruct popCountI(eRegI dst, eRegI src) %{
6507 predicate(UsePopCountInstruction);
6508 match(Set dst (PopCountI src));
6510 format %{ "POPCNT $dst, $src" %}
6511 ins_encode %{
6512 __ popcntl($dst$$Register, $src$$Register);
6513 %}
6514 ins_pipe(ialu_reg);
6515 %}
6517 instruct popCountI_mem(eRegI dst, memory mem) %{
6518 predicate(UsePopCountInstruction);
6519 match(Set dst (PopCountI (LoadI mem)));
6521 format %{ "POPCNT $dst, $mem" %}
6522 ins_encode %{
6523 __ popcntl($dst$$Register, $mem$$Address);
6524 %}
6525 ins_pipe(ialu_reg);
6526 %}
6528 // Note: Long.bitCount(long) returns an int.
6529 instruct popCountL(eRegI dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
6530 predicate(UsePopCountInstruction);
6531 match(Set dst (PopCountL src));
6532 effect(KILL cr, TEMP tmp, TEMP dst);
6534 format %{ "POPCNT $dst, $src.lo\n\t"
6535 "POPCNT $tmp, $src.hi\n\t"
6536 "ADD $dst, $tmp" %}
6537 ins_encode %{
6538 __ popcntl($dst$$Register, $src$$Register);
6539 __ popcntl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
6540 __ addl($dst$$Register, $tmp$$Register);
6541 %}
6542 ins_pipe(ialu_reg);
6543 %}
6545 // Note: Long.bitCount(long) returns an int.
6546 instruct popCountL_mem(eRegI dst, memory mem, eRegI tmp, eFlagsReg cr) %{
6547 predicate(UsePopCountInstruction);
6548 match(Set dst (PopCountL (LoadL mem)));
6549 effect(KILL cr, TEMP tmp, TEMP dst);
6551 format %{ "POPCNT $dst, $mem\n\t"
6552 "POPCNT $tmp, $mem+4\n\t"
6553 "ADD $dst, $tmp" %}
6554 ins_encode %{
6555 //__ popcntl($dst$$Register, $mem$$Address$$first);
6556 //__ popcntl($tmp$$Register, $mem$$Address$$second);
6557 __ popcntl($dst$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false));
6558 __ popcntl($tmp$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false));
6559 __ addl($dst$$Register, $tmp$$Register);
6560 %}
6561 ins_pipe(ialu_reg);
6562 %}
6565 //----------Load/Store/Move Instructions---------------------------------------
6566 //----------Load Instructions--------------------------------------------------
6567 // Load Byte (8bit signed)
6568 instruct loadB(xRegI dst, memory mem) %{
6569 match(Set dst (LoadB mem));
6571 ins_cost(125);
6572 format %{ "MOVSX8 $dst,$mem\t# byte" %}
6574 ins_encode %{
6575 __ movsbl($dst$$Register, $mem$$Address);
6576 %}
6578 ins_pipe(ialu_reg_mem);
6579 %}
6581 // Load Byte (8bit signed) into Long Register
6582 instruct loadB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6583 match(Set dst (ConvI2L (LoadB mem)));
6584 effect(KILL cr);
6586 ins_cost(375);
6587 format %{ "MOVSX8 $dst.lo,$mem\t# byte -> long\n\t"
6588 "MOV $dst.hi,$dst.lo\n\t"
6589 "SAR $dst.hi,7" %}
6591 ins_encode %{
6592 __ movsbl($dst$$Register, $mem$$Address);
6593 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6594 __ sarl(HIGH_FROM_LOW($dst$$Register), 7); // 24+1 MSB are already signed extended.
6595 %}
6597 ins_pipe(ialu_reg_mem);
6598 %}
6600 // Load Unsigned Byte (8bit UNsigned)
6601 instruct loadUB(xRegI dst, memory mem) %{
6602 match(Set dst (LoadUB mem));
6604 ins_cost(125);
6605 format %{ "MOVZX8 $dst,$mem\t# ubyte -> int" %}
6607 ins_encode %{
6608 __ movzbl($dst$$Register, $mem$$Address);
6609 %}
6611 ins_pipe(ialu_reg_mem);
6612 %}
6614 // Load Unsigned Byte (8 bit UNsigned) into Long Register
6615 instruct loadUB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6616 match(Set dst (ConvI2L (LoadUB mem)));
6617 effect(KILL cr);
6619 ins_cost(250);
6620 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte -> long\n\t"
6621 "XOR $dst.hi,$dst.hi" %}
6623 ins_encode %{
6624 Register Rdst = $dst$$Register;
6625 __ movzbl(Rdst, $mem$$Address);
6626 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6627 %}
6629 ins_pipe(ialu_reg_mem);
6630 %}
6632 // Load Unsigned Byte (8 bit UNsigned) with mask into Long Register
6633 instruct loadUB2L_immI8(eRegL dst, memory mem, immI8 mask, eFlagsReg cr) %{
6634 match(Set dst (ConvI2L (AndI (LoadUB mem) mask)));
6635 effect(KILL cr);
6637 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte & 8-bit mask -> long\n\t"
6638 "XOR $dst.hi,$dst.hi\n\t"
6639 "AND $dst.lo,$mask" %}
6640 ins_encode %{
6641 Register Rdst = $dst$$Register;
6642 __ movzbl(Rdst, $mem$$Address);
6643 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6644 __ andl(Rdst, $mask$$constant);
6645 %}
6646 ins_pipe(ialu_reg_mem);
6647 %}
6649 // Load Short (16bit signed)
6650 instruct loadS(eRegI dst, memory mem) %{
6651 match(Set dst (LoadS mem));
6653 ins_cost(125);
6654 format %{ "MOVSX $dst,$mem\t# short" %}
6656 ins_encode %{
6657 __ movswl($dst$$Register, $mem$$Address);
6658 %}
6660 ins_pipe(ialu_reg_mem);
6661 %}
6663 // Load Short (16 bit signed) to Byte (8 bit signed)
6664 instruct loadS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6665 match(Set dst (RShiftI (LShiftI (LoadS mem) twentyfour) twentyfour));
6667 ins_cost(125);
6668 format %{ "MOVSX $dst, $mem\t# short -> byte" %}
6669 ins_encode %{
6670 __ movsbl($dst$$Register, $mem$$Address);
6671 %}
6672 ins_pipe(ialu_reg_mem);
6673 %}
6675 // Load Short (16bit signed) into Long Register
6676 instruct loadS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6677 match(Set dst (ConvI2L (LoadS mem)));
6678 effect(KILL cr);
6680 ins_cost(375);
6681 format %{ "MOVSX $dst.lo,$mem\t# short -> long\n\t"
6682 "MOV $dst.hi,$dst.lo\n\t"
6683 "SAR $dst.hi,15" %}
6685 ins_encode %{
6686 __ movswl($dst$$Register, $mem$$Address);
6687 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6688 __ sarl(HIGH_FROM_LOW($dst$$Register), 15); // 16+1 MSB are already signed extended.
6689 %}
6691 ins_pipe(ialu_reg_mem);
6692 %}
6694 // Load Unsigned Short/Char (16bit unsigned)
6695 instruct loadUS(eRegI dst, memory mem) %{
6696 match(Set dst (LoadUS mem));
6698 ins_cost(125);
6699 format %{ "MOVZX $dst,$mem\t# ushort/char -> int" %}
6701 ins_encode %{
6702 __ movzwl($dst$$Register, $mem$$Address);
6703 %}
6705 ins_pipe(ialu_reg_mem);
6706 %}
6708 // Load Unsigned Short/Char (16 bit UNsigned) to Byte (8 bit signed)
6709 instruct loadUS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6710 match(Set dst (RShiftI (LShiftI (LoadUS mem) twentyfour) twentyfour));
6712 ins_cost(125);
6713 format %{ "MOVSX $dst, $mem\t# ushort -> byte" %}
6714 ins_encode %{
6715 __ movsbl($dst$$Register, $mem$$Address);
6716 %}
6717 ins_pipe(ialu_reg_mem);
6718 %}
6720 // Load Unsigned Short/Char (16 bit UNsigned) into Long Register
6721 instruct loadUS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6722 match(Set dst (ConvI2L (LoadUS mem)));
6723 effect(KILL cr);
6725 ins_cost(250);
6726 format %{ "MOVZX $dst.lo,$mem\t# ushort/char -> long\n\t"
6727 "XOR $dst.hi,$dst.hi" %}
6729 ins_encode %{
6730 __ movzwl($dst$$Register, $mem$$Address);
6731 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6732 %}
6734 ins_pipe(ialu_reg_mem);
6735 %}
6737 // Load Unsigned Short/Char (16 bit UNsigned) with mask 0xFF into Long Register
6738 instruct loadUS2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6739 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6740 effect(KILL cr);
6742 format %{ "MOVZX8 $dst.lo,$mem\t# ushort/char & 0xFF -> long\n\t"
6743 "XOR $dst.hi,$dst.hi" %}
6744 ins_encode %{
6745 Register Rdst = $dst$$Register;
6746 __ movzbl(Rdst, $mem$$Address);
6747 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6748 %}
6749 ins_pipe(ialu_reg_mem);
6750 %}
6752 // Load Unsigned Short/Char (16 bit UNsigned) with a 16-bit mask into Long Register
6753 instruct loadUS2L_immI16(eRegL dst, memory mem, immI16 mask, eFlagsReg cr) %{
6754 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6755 effect(KILL cr);
6757 format %{ "MOVZX $dst.lo, $mem\t# ushort/char & 16-bit mask -> long\n\t"
6758 "XOR $dst.hi,$dst.hi\n\t"
6759 "AND $dst.lo,$mask" %}
6760 ins_encode %{
6761 Register Rdst = $dst$$Register;
6762 __ movzwl(Rdst, $mem$$Address);
6763 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6764 __ andl(Rdst, $mask$$constant);
6765 %}
6766 ins_pipe(ialu_reg_mem);
6767 %}
6769 // Load Integer
6770 instruct loadI(eRegI dst, memory mem) %{
6771 match(Set dst (LoadI mem));
6773 ins_cost(125);
6774 format %{ "MOV $dst,$mem\t# int" %}
6776 ins_encode %{
6777 __ movl($dst$$Register, $mem$$Address);
6778 %}
6780 ins_pipe(ialu_reg_mem);
6781 %}
6783 // Load Integer (32 bit signed) to Byte (8 bit signed)
6784 instruct loadI2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6785 match(Set dst (RShiftI (LShiftI (LoadI mem) twentyfour) twentyfour));
6787 ins_cost(125);
6788 format %{ "MOVSX $dst, $mem\t# int -> byte" %}
6789 ins_encode %{
6790 __ movsbl($dst$$Register, $mem$$Address);
6791 %}
6792 ins_pipe(ialu_reg_mem);
6793 %}
6795 // Load Integer (32 bit signed) to Unsigned Byte (8 bit UNsigned)
6796 instruct loadI2UB(eRegI dst, memory mem, immI_255 mask) %{
6797 match(Set dst (AndI (LoadI mem) mask));
6799 ins_cost(125);
6800 format %{ "MOVZX $dst, $mem\t# int -> ubyte" %}
6801 ins_encode %{
6802 __ movzbl($dst$$Register, $mem$$Address);
6803 %}
6804 ins_pipe(ialu_reg_mem);
6805 %}
6807 // Load Integer (32 bit signed) to Short (16 bit signed)
6808 instruct loadI2S(eRegI dst, memory mem, immI_16 sixteen) %{
6809 match(Set dst (RShiftI (LShiftI (LoadI mem) sixteen) sixteen));
6811 ins_cost(125);
6812 format %{ "MOVSX $dst, $mem\t# int -> short" %}
6813 ins_encode %{
6814 __ movswl($dst$$Register, $mem$$Address);
6815 %}
6816 ins_pipe(ialu_reg_mem);
6817 %}
6819 // Load Integer (32 bit signed) to Unsigned Short/Char (16 bit UNsigned)
6820 instruct loadI2US(eRegI dst, memory mem, immI_65535 mask) %{
6821 match(Set dst (AndI (LoadI mem) mask));
6823 ins_cost(125);
6824 format %{ "MOVZX $dst, $mem\t# int -> ushort/char" %}
6825 ins_encode %{
6826 __ movzwl($dst$$Register, $mem$$Address);
6827 %}
6828 ins_pipe(ialu_reg_mem);
6829 %}
6831 // Load Integer into Long Register
6832 instruct loadI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6833 match(Set dst (ConvI2L (LoadI mem)));
6834 effect(KILL cr);
6836 ins_cost(375);
6837 format %{ "MOV $dst.lo,$mem\t# int -> long\n\t"
6838 "MOV $dst.hi,$dst.lo\n\t"
6839 "SAR $dst.hi,31" %}
6841 ins_encode %{
6842 __ movl($dst$$Register, $mem$$Address);
6843 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6844 __ sarl(HIGH_FROM_LOW($dst$$Register), 31);
6845 %}
6847 ins_pipe(ialu_reg_mem);
6848 %}
6850 // Load Integer with mask 0xFF into Long Register
6851 instruct loadI2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6852 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6853 effect(KILL cr);
6855 format %{ "MOVZX8 $dst.lo,$mem\t# int & 0xFF -> long\n\t"
6856 "XOR $dst.hi,$dst.hi" %}
6857 ins_encode %{
6858 Register Rdst = $dst$$Register;
6859 __ movzbl(Rdst, $mem$$Address);
6860 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6861 %}
6862 ins_pipe(ialu_reg_mem);
6863 %}
6865 // Load Integer with mask 0xFFFF into Long Register
6866 instruct loadI2L_immI_65535(eRegL dst, memory mem, immI_65535 mask, eFlagsReg cr) %{
6867 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6868 effect(KILL cr);
6870 format %{ "MOVZX $dst.lo,$mem\t# int & 0xFFFF -> long\n\t"
6871 "XOR $dst.hi,$dst.hi" %}
6872 ins_encode %{
6873 Register Rdst = $dst$$Register;
6874 __ movzwl(Rdst, $mem$$Address);
6875 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6876 %}
6877 ins_pipe(ialu_reg_mem);
6878 %}
6880 // Load Integer with 32-bit mask into Long Register
6881 instruct loadI2L_immI(eRegL dst, memory mem, immI mask, eFlagsReg cr) %{
6882 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6883 effect(KILL cr);
6885 format %{ "MOV $dst.lo,$mem\t# int & 32-bit mask -> long\n\t"
6886 "XOR $dst.hi,$dst.hi\n\t"
6887 "AND $dst.lo,$mask" %}
6888 ins_encode %{
6889 Register Rdst = $dst$$Register;
6890 __ movl(Rdst, $mem$$Address);
6891 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6892 __ andl(Rdst, $mask$$constant);
6893 %}
6894 ins_pipe(ialu_reg_mem);
6895 %}
6897 // Load Unsigned Integer into Long Register
6898 instruct loadUI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6899 match(Set dst (LoadUI2L mem));
6900 effect(KILL cr);
6902 ins_cost(250);
6903 format %{ "MOV $dst.lo,$mem\t# uint -> long\n\t"
6904 "XOR $dst.hi,$dst.hi" %}
6906 ins_encode %{
6907 __ movl($dst$$Register, $mem$$Address);
6908 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6909 %}
6911 ins_pipe(ialu_reg_mem);
6912 %}
6914 // Load Long. Cannot clobber address while loading, so restrict address
6915 // register to ESI
6916 instruct loadL(eRegL dst, load_long_memory mem) %{
6917 predicate(!((LoadLNode*)n)->require_atomic_access());
6918 match(Set dst (LoadL mem));
6920 ins_cost(250);
6921 format %{ "MOV $dst.lo,$mem\t# long\n\t"
6922 "MOV $dst.hi,$mem+4" %}
6924 ins_encode %{
6925 Address Amemlo = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false);
6926 Address Amemhi = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false);
6927 __ movl($dst$$Register, Amemlo);
6928 __ movl(HIGH_FROM_LOW($dst$$Register), Amemhi);
6929 %}
6931 ins_pipe(ialu_reg_long_mem);
6932 %}
6934 // Volatile Load Long. Must be atomic, so do 64-bit FILD
6935 // then store it down to the stack and reload on the int
6936 // side.
6937 instruct loadL_volatile(stackSlotL dst, memory mem) %{
6938 predicate(UseSSE<=1 && ((LoadLNode*)n)->require_atomic_access());
6939 match(Set dst (LoadL mem));
6941 ins_cost(200);
6942 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
6943 "FISTp $dst" %}
6944 ins_encode(enc_loadL_volatile(mem,dst));
6945 ins_pipe( fpu_reg_mem );
6946 %}
6948 instruct loadLX_volatile(stackSlotL dst, memory mem, regXD tmp) %{
6949 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6950 match(Set dst (LoadL mem));
6951 effect(TEMP tmp);
6952 ins_cost(180);
6953 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6954 "MOVSD $dst,$tmp" %}
6955 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
6956 ins_pipe( pipe_slow );
6957 %}
6959 instruct loadLX_reg_volatile(eRegL dst, memory mem, regXD tmp) %{
6960 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6961 match(Set dst (LoadL mem));
6962 effect(TEMP tmp);
6963 ins_cost(160);
6964 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6965 "MOVD $dst.lo,$tmp\n\t"
6966 "PSRLQ $tmp,32\n\t"
6967 "MOVD $dst.hi,$tmp" %}
6968 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
6969 ins_pipe( pipe_slow );
6970 %}
6972 // Load Range
6973 instruct loadRange(eRegI dst, memory mem) %{
6974 match(Set dst (LoadRange mem));
6976 ins_cost(125);
6977 format %{ "MOV $dst,$mem" %}
6978 opcode(0x8B);
6979 ins_encode( OpcP, RegMem(dst,mem));
6980 ins_pipe( ialu_reg_mem );
6981 %}
6984 // Load Pointer
6985 instruct loadP(eRegP dst, memory mem) %{
6986 match(Set dst (LoadP mem));
6988 ins_cost(125);
6989 format %{ "MOV $dst,$mem" %}
6990 opcode(0x8B);
6991 ins_encode( OpcP, RegMem(dst,mem));
6992 ins_pipe( ialu_reg_mem );
6993 %}
6995 // Load Klass Pointer
6996 instruct loadKlass(eRegP dst, memory mem) %{
6997 match(Set dst (LoadKlass mem));
6999 ins_cost(125);
7000 format %{ "MOV $dst,$mem" %}
7001 opcode(0x8B);
7002 ins_encode( OpcP, RegMem(dst,mem));
7003 ins_pipe( ialu_reg_mem );
7004 %}
7006 // Load Double
7007 instruct loadD(regD dst, memory mem) %{
7008 predicate(UseSSE<=1);
7009 match(Set dst (LoadD mem));
7011 ins_cost(150);
7012 format %{ "FLD_D ST,$mem\n\t"
7013 "FSTP $dst" %}
7014 opcode(0xDD); /* DD /0 */
7015 ins_encode( OpcP, RMopc_Mem(0x00,mem),
7016 Pop_Reg_D(dst) );
7017 ins_pipe( fpu_reg_mem );
7018 %}
7020 // Load Double to XMM
7021 instruct loadXD(regXD dst, memory mem) %{
7022 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
7023 match(Set dst (LoadD mem));
7024 ins_cost(145);
7025 format %{ "MOVSD $dst,$mem" %}
7026 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
7027 ins_pipe( pipe_slow );
7028 %}
7030 instruct loadXD_partial(regXD dst, memory mem) %{
7031 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
7032 match(Set dst (LoadD mem));
7033 ins_cost(145);
7034 format %{ "MOVLPD $dst,$mem" %}
7035 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,mem));
7036 ins_pipe( pipe_slow );
7037 %}
7039 // Load to XMM register (single-precision floating point)
7040 // MOVSS instruction
7041 instruct loadX(regX dst, memory mem) %{
7042 predicate(UseSSE>=1);
7043 match(Set dst (LoadF mem));
7044 ins_cost(145);
7045 format %{ "MOVSS $dst,$mem" %}
7046 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
7047 ins_pipe( pipe_slow );
7048 %}
7050 // Load Float
7051 instruct loadF(regF dst, memory mem) %{
7052 predicate(UseSSE==0);
7053 match(Set dst (LoadF mem));
7055 ins_cost(150);
7056 format %{ "FLD_S ST,$mem\n\t"
7057 "FSTP $dst" %}
7058 opcode(0xD9); /* D9 /0 */
7059 ins_encode( OpcP, RMopc_Mem(0x00,mem),
7060 Pop_Reg_F(dst) );
7061 ins_pipe( fpu_reg_mem );
7062 %}
7064 // Load Aligned Packed Byte to XMM register
7065 instruct loadA8B(regXD dst, memory mem) %{
7066 predicate(UseSSE>=1);
7067 match(Set dst (Load8B mem));
7068 ins_cost(125);
7069 format %{ "MOVQ $dst,$mem\t! packed8B" %}
7070 ins_encode( movq_ld(dst, mem));
7071 ins_pipe( pipe_slow );
7072 %}
7074 // Load Aligned Packed Short to XMM register
7075 instruct loadA4S(regXD dst, memory mem) %{
7076 predicate(UseSSE>=1);
7077 match(Set dst (Load4S mem));
7078 ins_cost(125);
7079 format %{ "MOVQ $dst,$mem\t! packed4S" %}
7080 ins_encode( movq_ld(dst, mem));
7081 ins_pipe( pipe_slow );
7082 %}
7084 // Load Aligned Packed Char to XMM register
7085 instruct loadA4C(regXD dst, memory mem) %{
7086 predicate(UseSSE>=1);
7087 match(Set dst (Load4C mem));
7088 ins_cost(125);
7089 format %{ "MOVQ $dst,$mem\t! packed4C" %}
7090 ins_encode( movq_ld(dst, mem));
7091 ins_pipe( pipe_slow );
7092 %}
7094 // Load Aligned Packed Integer to XMM register
7095 instruct load2IU(regXD dst, memory mem) %{
7096 predicate(UseSSE>=1);
7097 match(Set dst (Load2I mem));
7098 ins_cost(125);
7099 format %{ "MOVQ $dst,$mem\t! packed2I" %}
7100 ins_encode( movq_ld(dst, mem));
7101 ins_pipe( pipe_slow );
7102 %}
7104 // Load Aligned Packed Single to XMM
7105 instruct loadA2F(regXD dst, memory mem) %{
7106 predicate(UseSSE>=1);
7107 match(Set dst (Load2F mem));
7108 ins_cost(145);
7109 format %{ "MOVQ $dst,$mem\t! packed2F" %}
7110 ins_encode( movq_ld(dst, mem));
7111 ins_pipe( pipe_slow );
7112 %}
7114 // Load Effective Address
7115 instruct leaP8(eRegP dst, indOffset8 mem) %{
7116 match(Set dst mem);
7118 ins_cost(110);
7119 format %{ "LEA $dst,$mem" %}
7120 opcode(0x8D);
7121 ins_encode( OpcP, RegMem(dst,mem));
7122 ins_pipe( ialu_reg_reg_fat );
7123 %}
7125 instruct leaP32(eRegP dst, indOffset32 mem) %{
7126 match(Set dst mem);
7128 ins_cost(110);
7129 format %{ "LEA $dst,$mem" %}
7130 opcode(0x8D);
7131 ins_encode( OpcP, RegMem(dst,mem));
7132 ins_pipe( ialu_reg_reg_fat );
7133 %}
7135 instruct leaPIdxOff(eRegP dst, indIndexOffset mem) %{
7136 match(Set dst mem);
7138 ins_cost(110);
7139 format %{ "LEA $dst,$mem" %}
7140 opcode(0x8D);
7141 ins_encode( OpcP, RegMem(dst,mem));
7142 ins_pipe( ialu_reg_reg_fat );
7143 %}
7145 instruct leaPIdxScale(eRegP dst, indIndexScale mem) %{
7146 match(Set dst mem);
7148 ins_cost(110);
7149 format %{ "LEA $dst,$mem" %}
7150 opcode(0x8D);
7151 ins_encode( OpcP, RegMem(dst,mem));
7152 ins_pipe( ialu_reg_reg_fat );
7153 %}
7155 instruct leaPIdxScaleOff(eRegP dst, indIndexScaleOffset mem) %{
7156 match(Set dst mem);
7158 ins_cost(110);
7159 format %{ "LEA $dst,$mem" %}
7160 opcode(0x8D);
7161 ins_encode( OpcP, RegMem(dst,mem));
7162 ins_pipe( ialu_reg_reg_fat );
7163 %}
7165 // Load Constant
7166 instruct loadConI(eRegI dst, immI src) %{
7167 match(Set dst src);
7169 format %{ "MOV $dst,$src" %}
7170 ins_encode( LdImmI(dst, src) );
7171 ins_pipe( ialu_reg_fat );
7172 %}
7174 // Load Constant zero
7175 instruct loadConI0(eRegI dst, immI0 src, eFlagsReg cr) %{
7176 match(Set dst src);
7177 effect(KILL cr);
7179 ins_cost(50);
7180 format %{ "XOR $dst,$dst" %}
7181 opcode(0x33); /* + rd */
7182 ins_encode( OpcP, RegReg( dst, dst ) );
7183 ins_pipe( ialu_reg );
7184 %}
7186 instruct loadConP(eRegP dst, immP src) %{
7187 match(Set dst src);
7189 format %{ "MOV $dst,$src" %}
7190 opcode(0xB8); /* + rd */
7191 ins_encode( LdImmP(dst, src) );
7192 ins_pipe( ialu_reg_fat );
7193 %}
7195 instruct loadConL(eRegL dst, immL src, eFlagsReg cr) %{
7196 match(Set dst src);
7197 effect(KILL cr);
7198 ins_cost(200);
7199 format %{ "MOV $dst.lo,$src.lo\n\t"
7200 "MOV $dst.hi,$src.hi" %}
7201 opcode(0xB8);
7202 ins_encode( LdImmL_Lo(dst, src), LdImmL_Hi(dst, src) );
7203 ins_pipe( ialu_reg_long_fat );
7204 %}
7206 instruct loadConL0(eRegL dst, immL0 src, eFlagsReg cr) %{
7207 match(Set dst src);
7208 effect(KILL cr);
7209 ins_cost(150);
7210 format %{ "XOR $dst.lo,$dst.lo\n\t"
7211 "XOR $dst.hi,$dst.hi" %}
7212 opcode(0x33,0x33);
7213 ins_encode( RegReg_Lo(dst,dst), RegReg_Hi(dst, dst) );
7214 ins_pipe( ialu_reg_long );
7215 %}
7217 // The instruction usage is guarded by predicate in operand immF().
7218 instruct loadConF(regF dst, immF src) %{
7219 match(Set dst src);
7220 ins_cost(125);
7222 format %{ "FLD_S ST,$src\n\t"
7223 "FSTP $dst" %}
7224 opcode(0xD9, 0x00); /* D9 /0 */
7225 ins_encode(LdImmF(src), Pop_Reg_F(dst) );
7226 ins_pipe( fpu_reg_con );
7227 %}
7229 // The instruction usage is guarded by predicate in operand immXF().
7230 instruct loadConX(regX dst, immXF con) %{
7231 match(Set dst con);
7232 ins_cost(125);
7233 format %{ "MOVSS $dst,[$con]" %}
7234 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), LdImmX(dst, con));
7235 ins_pipe( pipe_slow );
7236 %}
7238 // The instruction usage is guarded by predicate in operand immXF0().
7239 instruct loadConX0(regX dst, immXF0 src) %{
7240 match(Set dst src);
7241 ins_cost(100);
7242 format %{ "XORPS $dst,$dst\t# float 0.0" %}
7243 ins_encode( Opcode(0x0F), Opcode(0x57), RegReg(dst,dst));
7244 ins_pipe( pipe_slow );
7245 %}
7247 // The instruction usage is guarded by predicate in operand immD().
7248 instruct loadConD(regD dst, immD src) %{
7249 match(Set dst src);
7250 ins_cost(125);
7252 format %{ "FLD_D ST,$src\n\t"
7253 "FSTP $dst" %}
7254 ins_encode(LdImmD(src), Pop_Reg_D(dst) );
7255 ins_pipe( fpu_reg_con );
7256 %}
7258 // The instruction usage is guarded by predicate in operand immXD().
7259 instruct loadConXD(regXD dst, immXD con) %{
7260 match(Set dst con);
7261 ins_cost(125);
7262 format %{ "MOVSD $dst,[$con]" %}
7263 ins_encode(load_conXD(dst, con));
7264 ins_pipe( pipe_slow );
7265 %}
7267 // The instruction usage is guarded by predicate in operand immXD0().
7268 instruct loadConXD0(regXD dst, immXD0 src) %{
7269 match(Set dst src);
7270 ins_cost(100);
7271 format %{ "XORPD $dst,$dst\t# double 0.0" %}
7272 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x57), RegReg(dst,dst));
7273 ins_pipe( pipe_slow );
7274 %}
7276 // Load Stack Slot
7277 instruct loadSSI(eRegI dst, stackSlotI src) %{
7278 match(Set dst src);
7279 ins_cost(125);
7281 format %{ "MOV $dst,$src" %}
7282 opcode(0x8B);
7283 ins_encode( OpcP, RegMem(dst,src));
7284 ins_pipe( ialu_reg_mem );
7285 %}
7287 instruct loadSSL(eRegL dst, stackSlotL src) %{
7288 match(Set dst src);
7290 ins_cost(200);
7291 format %{ "MOV $dst,$src.lo\n\t"
7292 "MOV $dst+4,$src.hi" %}
7293 opcode(0x8B, 0x8B);
7294 ins_encode( OpcP, RegMem( dst, src ), OpcS, RegMem_Hi( dst, src ) );
7295 ins_pipe( ialu_mem_long_reg );
7296 %}
7298 // Load Stack Slot
7299 instruct loadSSP(eRegP dst, stackSlotP src) %{
7300 match(Set dst src);
7301 ins_cost(125);
7303 format %{ "MOV $dst,$src" %}
7304 opcode(0x8B);
7305 ins_encode( OpcP, RegMem(dst,src));
7306 ins_pipe( ialu_reg_mem );
7307 %}
7309 // Load Stack Slot
7310 instruct loadSSF(regF dst, stackSlotF src) %{
7311 match(Set dst src);
7312 ins_cost(125);
7314 format %{ "FLD_S $src\n\t"
7315 "FSTP $dst" %}
7316 opcode(0xD9); /* D9 /0, FLD m32real */
7317 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7318 Pop_Reg_F(dst) );
7319 ins_pipe( fpu_reg_mem );
7320 %}
7322 // Load Stack Slot
7323 instruct loadSSD(regD dst, stackSlotD src) %{
7324 match(Set dst src);
7325 ins_cost(125);
7327 format %{ "FLD_D $src\n\t"
7328 "FSTP $dst" %}
7329 opcode(0xDD); /* DD /0, FLD m64real */
7330 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7331 Pop_Reg_D(dst) );
7332 ins_pipe( fpu_reg_mem );
7333 %}
7335 // Prefetch instructions.
7336 // Must be safe to execute with invalid address (cannot fault).
7338 instruct prefetchr0( memory mem ) %{
7339 predicate(UseSSE==0 && !VM_Version::supports_3dnow());
7340 match(PrefetchRead mem);
7341 ins_cost(0);
7342 size(0);
7343 format %{ "PREFETCHR (non-SSE is empty encoding)" %}
7344 ins_encode();
7345 ins_pipe(empty);
7346 %}
7348 instruct prefetchr( memory mem ) %{
7349 predicate(UseSSE==0 && VM_Version::supports_3dnow() || ReadPrefetchInstr==3);
7350 match(PrefetchRead mem);
7351 ins_cost(100);
7353 format %{ "PREFETCHR $mem\t! Prefetch into level 1 cache for read" %}
7354 opcode(0x0F, 0x0d); /* Opcode 0F 0d /0 */
7355 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7356 ins_pipe(ialu_mem);
7357 %}
7359 instruct prefetchrNTA( memory mem ) %{
7360 predicate(UseSSE>=1 && ReadPrefetchInstr==0);
7361 match(PrefetchRead mem);
7362 ins_cost(100);
7364 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for read" %}
7365 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7366 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7367 ins_pipe(ialu_mem);
7368 %}
7370 instruct prefetchrT0( memory mem ) %{
7371 predicate(UseSSE>=1 && ReadPrefetchInstr==1);
7372 match(PrefetchRead mem);
7373 ins_cost(100);
7375 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for read" %}
7376 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7377 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7378 ins_pipe(ialu_mem);
7379 %}
7381 instruct prefetchrT2( memory mem ) %{
7382 predicate(UseSSE>=1 && ReadPrefetchInstr==2);
7383 match(PrefetchRead mem);
7384 ins_cost(100);
7386 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for read" %}
7387 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7388 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7389 ins_pipe(ialu_mem);
7390 %}
7392 instruct prefetchw0( memory mem ) %{
7393 predicate(UseSSE==0 && !VM_Version::supports_3dnow());
7394 match(PrefetchWrite mem);
7395 ins_cost(0);
7396 size(0);
7397 format %{ "Prefetch (non-SSE is empty encoding)" %}
7398 ins_encode();
7399 ins_pipe(empty);
7400 %}
7402 instruct prefetchw( memory mem ) %{
7403 predicate(UseSSE==0 && VM_Version::supports_3dnow() || AllocatePrefetchInstr==3);
7404 match( PrefetchWrite mem );
7405 ins_cost(100);
7407 format %{ "PREFETCHW $mem\t! Prefetch into L1 cache and mark modified" %}
7408 opcode(0x0F, 0x0D); /* Opcode 0F 0D /1 */
7409 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7410 ins_pipe(ialu_mem);
7411 %}
7413 instruct prefetchwNTA( memory mem ) %{
7414 predicate(UseSSE>=1 && AllocatePrefetchInstr==0);
7415 match(PrefetchWrite mem);
7416 ins_cost(100);
7418 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for write" %}
7419 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7420 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7421 ins_pipe(ialu_mem);
7422 %}
7424 instruct prefetchwT0( memory mem ) %{
7425 predicate(UseSSE>=1 && AllocatePrefetchInstr==1);
7426 match(PrefetchWrite mem);
7427 ins_cost(100);
7429 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for write" %}
7430 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7431 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7432 ins_pipe(ialu_mem);
7433 %}
7435 instruct prefetchwT2( memory mem ) %{
7436 predicate(UseSSE>=1 && AllocatePrefetchInstr==2);
7437 match(PrefetchWrite mem);
7438 ins_cost(100);
7440 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for write" %}
7441 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7442 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7443 ins_pipe(ialu_mem);
7444 %}
7446 //----------Store Instructions-------------------------------------------------
7448 // Store Byte
7449 instruct storeB(memory mem, xRegI src) %{
7450 match(Set mem (StoreB mem src));
7452 ins_cost(125);
7453 format %{ "MOV8 $mem,$src" %}
7454 opcode(0x88);
7455 ins_encode( OpcP, RegMem( src, mem ) );
7456 ins_pipe( ialu_mem_reg );
7457 %}
7459 // Store Char/Short
7460 instruct storeC(memory mem, eRegI src) %{
7461 match(Set mem (StoreC mem src));
7463 ins_cost(125);
7464 format %{ "MOV16 $mem,$src" %}
7465 opcode(0x89, 0x66);
7466 ins_encode( OpcS, OpcP, RegMem( src, mem ) );
7467 ins_pipe( ialu_mem_reg );
7468 %}
7470 // Store Integer
7471 instruct storeI(memory mem, eRegI src) %{
7472 match(Set mem (StoreI mem src));
7474 ins_cost(125);
7475 format %{ "MOV $mem,$src" %}
7476 opcode(0x89);
7477 ins_encode( OpcP, RegMem( src, mem ) );
7478 ins_pipe( ialu_mem_reg );
7479 %}
7481 // Store Long
7482 instruct storeL(long_memory mem, eRegL src) %{
7483 predicate(!((StoreLNode*)n)->require_atomic_access());
7484 match(Set mem (StoreL mem src));
7486 ins_cost(200);
7487 format %{ "MOV $mem,$src.lo\n\t"
7488 "MOV $mem+4,$src.hi" %}
7489 opcode(0x89, 0x89);
7490 ins_encode( OpcP, RegMem( src, mem ), OpcS, RegMem_Hi( src, mem ) );
7491 ins_pipe( ialu_mem_long_reg );
7492 %}
7494 // Store Long to Integer
7495 instruct storeL2I(memory mem, eRegL src) %{
7496 match(Set mem (StoreI mem (ConvL2I src)));
7498 format %{ "MOV $mem,$src.lo\t# long -> int" %}
7499 ins_encode %{
7500 __ movl($mem$$Address, $src$$Register);
7501 %}
7502 ins_pipe(ialu_mem_reg);
7503 %}
7505 // Volatile Store Long. Must be atomic, so move it into
7506 // the FP TOS and then do a 64-bit FIST. Has to probe the
7507 // target address before the store (for null-ptr checks)
7508 // so the memory operand is used twice in the encoding.
7509 instruct storeL_volatile(memory mem, stackSlotL src, eFlagsReg cr ) %{
7510 predicate(UseSSE<=1 && ((StoreLNode*)n)->require_atomic_access());
7511 match(Set mem (StoreL mem src));
7512 effect( KILL cr );
7513 ins_cost(400);
7514 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7515 "FILD $src\n\t"
7516 "FISTp $mem\t # 64-bit atomic volatile long store" %}
7517 opcode(0x3B);
7518 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeL_volatile(mem,src));
7519 ins_pipe( fpu_reg_mem );
7520 %}
7522 instruct storeLX_volatile(memory mem, stackSlotL src, regXD tmp, eFlagsReg cr) %{
7523 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7524 match(Set mem (StoreL mem src));
7525 effect( TEMP tmp, KILL cr );
7526 ins_cost(380);
7527 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7528 "MOVSD $tmp,$src\n\t"
7529 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7530 opcode(0x3B);
7531 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_volatile(mem, src, tmp));
7532 ins_pipe( pipe_slow );
7533 %}
7535 instruct storeLX_reg_volatile(memory mem, eRegL src, regXD tmp2, regXD tmp, eFlagsReg cr) %{
7536 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7537 match(Set mem (StoreL mem src));
7538 effect( TEMP tmp2 , TEMP tmp, KILL cr );
7539 ins_cost(360);
7540 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7541 "MOVD $tmp,$src.lo\n\t"
7542 "MOVD $tmp2,$src.hi\n\t"
7543 "PUNPCKLDQ $tmp,$tmp2\n\t"
7544 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7545 opcode(0x3B);
7546 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_reg_volatile(mem, src, tmp, tmp2));
7547 ins_pipe( pipe_slow );
7548 %}
7550 // Store Pointer; for storing unknown oops and raw pointers
7551 instruct storeP(memory mem, anyRegP src) %{
7552 match(Set mem (StoreP mem src));
7554 ins_cost(125);
7555 format %{ "MOV $mem,$src" %}
7556 opcode(0x89);
7557 ins_encode( OpcP, RegMem( src, mem ) );
7558 ins_pipe( ialu_mem_reg );
7559 %}
7561 // Store Integer Immediate
7562 instruct storeImmI(memory mem, immI src) %{
7563 match(Set mem (StoreI mem src));
7565 ins_cost(150);
7566 format %{ "MOV $mem,$src" %}
7567 opcode(0xC7); /* C7 /0 */
7568 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7569 ins_pipe( ialu_mem_imm );
7570 %}
7572 // Store Short/Char Immediate
7573 instruct storeImmI16(memory mem, immI16 src) %{
7574 predicate(UseStoreImmI16);
7575 match(Set mem (StoreC mem src));
7577 ins_cost(150);
7578 format %{ "MOV16 $mem,$src" %}
7579 opcode(0xC7); /* C7 /0 Same as 32 store immediate with prefix */
7580 ins_encode( SizePrefix, OpcP, RMopc_Mem(0x00,mem), Con16( src ));
7581 ins_pipe( ialu_mem_imm );
7582 %}
7584 // Store Pointer Immediate; null pointers or constant oops that do not
7585 // need card-mark barriers.
7586 instruct storeImmP(memory mem, immP src) %{
7587 match(Set mem (StoreP mem src));
7589 ins_cost(150);
7590 format %{ "MOV $mem,$src" %}
7591 opcode(0xC7); /* C7 /0 */
7592 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7593 ins_pipe( ialu_mem_imm );
7594 %}
7596 // Store Byte Immediate
7597 instruct storeImmB(memory mem, immI8 src) %{
7598 match(Set mem (StoreB mem src));
7600 ins_cost(150);
7601 format %{ "MOV8 $mem,$src" %}
7602 opcode(0xC6); /* C6 /0 */
7603 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7604 ins_pipe( ialu_mem_imm );
7605 %}
7607 // Store Aligned Packed Byte XMM register to memory
7608 instruct storeA8B(memory mem, regXD src) %{
7609 predicate(UseSSE>=1);
7610 match(Set mem (Store8B mem src));
7611 ins_cost(145);
7612 format %{ "MOVQ $mem,$src\t! packed8B" %}
7613 ins_encode( movq_st(mem, src));
7614 ins_pipe( pipe_slow );
7615 %}
7617 // Store Aligned Packed Char/Short XMM register to memory
7618 instruct storeA4C(memory mem, regXD src) %{
7619 predicate(UseSSE>=1);
7620 match(Set mem (Store4C mem src));
7621 ins_cost(145);
7622 format %{ "MOVQ $mem,$src\t! packed4C" %}
7623 ins_encode( movq_st(mem, src));
7624 ins_pipe( pipe_slow );
7625 %}
7627 // Store Aligned Packed Integer XMM register to memory
7628 instruct storeA2I(memory mem, regXD src) %{
7629 predicate(UseSSE>=1);
7630 match(Set mem (Store2I mem src));
7631 ins_cost(145);
7632 format %{ "MOVQ $mem,$src\t! packed2I" %}
7633 ins_encode( movq_st(mem, src));
7634 ins_pipe( pipe_slow );
7635 %}
7637 // Store CMS card-mark Immediate
7638 instruct storeImmCM(memory mem, immI8 src) %{
7639 match(Set mem (StoreCM mem src));
7641 ins_cost(150);
7642 format %{ "MOV8 $mem,$src\t! CMS card-mark imm0" %}
7643 opcode(0xC6); /* C6 /0 */
7644 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7645 ins_pipe( ialu_mem_imm );
7646 %}
7648 // Store Double
7649 instruct storeD( memory mem, regDPR1 src) %{
7650 predicate(UseSSE<=1);
7651 match(Set mem (StoreD mem src));
7653 ins_cost(100);
7654 format %{ "FST_D $mem,$src" %}
7655 opcode(0xDD); /* DD /2 */
7656 ins_encode( enc_FP_store(mem,src) );
7657 ins_pipe( fpu_mem_reg );
7658 %}
7660 // Store double does rounding on x86
7661 instruct storeD_rounded( memory mem, regDPR1 src) %{
7662 predicate(UseSSE<=1);
7663 match(Set mem (StoreD mem (RoundDouble src)));
7665 ins_cost(100);
7666 format %{ "FST_D $mem,$src\t# round" %}
7667 opcode(0xDD); /* DD /2 */
7668 ins_encode( enc_FP_store(mem,src) );
7669 ins_pipe( fpu_mem_reg );
7670 %}
7672 // Store XMM register to memory (double-precision floating points)
7673 // MOVSD instruction
7674 instruct storeXD(memory mem, regXD src) %{
7675 predicate(UseSSE>=2);
7676 match(Set mem (StoreD mem src));
7677 ins_cost(95);
7678 format %{ "MOVSD $mem,$src" %}
7679 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7680 ins_pipe( pipe_slow );
7681 %}
7683 // Store XMM register to memory (single-precision floating point)
7684 // MOVSS instruction
7685 instruct storeX(memory mem, regX src) %{
7686 predicate(UseSSE>=1);
7687 match(Set mem (StoreF mem src));
7688 ins_cost(95);
7689 format %{ "MOVSS $mem,$src" %}
7690 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7691 ins_pipe( pipe_slow );
7692 %}
7694 // Store Aligned Packed Single Float XMM register to memory
7695 instruct storeA2F(memory mem, regXD src) %{
7696 predicate(UseSSE>=1);
7697 match(Set mem (Store2F mem src));
7698 ins_cost(145);
7699 format %{ "MOVQ $mem,$src\t! packed2F" %}
7700 ins_encode( movq_st(mem, src));
7701 ins_pipe( pipe_slow );
7702 %}
7704 // Store Float
7705 instruct storeF( memory mem, regFPR1 src) %{
7706 predicate(UseSSE==0);
7707 match(Set mem (StoreF mem src));
7709 ins_cost(100);
7710 format %{ "FST_S $mem,$src" %}
7711 opcode(0xD9); /* D9 /2 */
7712 ins_encode( enc_FP_store(mem,src) );
7713 ins_pipe( fpu_mem_reg );
7714 %}
7716 // Store Float does rounding on x86
7717 instruct storeF_rounded( memory mem, regFPR1 src) %{
7718 predicate(UseSSE==0);
7719 match(Set mem (StoreF mem (RoundFloat src)));
7721 ins_cost(100);
7722 format %{ "FST_S $mem,$src\t# round" %}
7723 opcode(0xD9); /* D9 /2 */
7724 ins_encode( enc_FP_store(mem,src) );
7725 ins_pipe( fpu_mem_reg );
7726 %}
7728 // Store Float does rounding on x86
7729 instruct storeF_Drounded( memory mem, regDPR1 src) %{
7730 predicate(UseSSE<=1);
7731 match(Set mem (StoreF mem (ConvD2F src)));
7733 ins_cost(100);
7734 format %{ "FST_S $mem,$src\t# D-round" %}
7735 opcode(0xD9); /* D9 /2 */
7736 ins_encode( enc_FP_store(mem,src) );
7737 ins_pipe( fpu_mem_reg );
7738 %}
7740 // Store immediate Float value (it is faster than store from FPU register)
7741 // The instruction usage is guarded by predicate in operand immF().
7742 instruct storeF_imm( memory mem, immF src) %{
7743 match(Set mem (StoreF mem src));
7745 ins_cost(50);
7746 format %{ "MOV $mem,$src\t# store float" %}
7747 opcode(0xC7); /* C7 /0 */
7748 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32F_as_bits( src ));
7749 ins_pipe( ialu_mem_imm );
7750 %}
7752 // Store immediate Float value (it is faster than store from XMM register)
7753 // The instruction usage is guarded by predicate in operand immXF().
7754 instruct storeX_imm( memory mem, immXF src) %{
7755 match(Set mem (StoreF mem src));
7757 ins_cost(50);
7758 format %{ "MOV $mem,$src\t# store float" %}
7759 opcode(0xC7); /* C7 /0 */
7760 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32XF_as_bits( src ));
7761 ins_pipe( ialu_mem_imm );
7762 %}
7764 // Store Integer to stack slot
7765 instruct storeSSI(stackSlotI dst, eRegI src) %{
7766 match(Set dst src);
7768 ins_cost(100);
7769 format %{ "MOV $dst,$src" %}
7770 opcode(0x89);
7771 ins_encode( OpcPRegSS( dst, src ) );
7772 ins_pipe( ialu_mem_reg );
7773 %}
7775 // Store Integer to stack slot
7776 instruct storeSSP(stackSlotP dst, eRegP src) %{
7777 match(Set dst src);
7779 ins_cost(100);
7780 format %{ "MOV $dst,$src" %}
7781 opcode(0x89);
7782 ins_encode( OpcPRegSS( dst, src ) );
7783 ins_pipe( ialu_mem_reg );
7784 %}
7786 // Store Long to stack slot
7787 instruct storeSSL(stackSlotL dst, eRegL src) %{
7788 match(Set dst src);
7790 ins_cost(200);
7791 format %{ "MOV $dst,$src.lo\n\t"
7792 "MOV $dst+4,$src.hi" %}
7793 opcode(0x89, 0x89);
7794 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
7795 ins_pipe( ialu_mem_long_reg );
7796 %}
7798 //----------MemBar Instructions-----------------------------------------------
7799 // Memory barrier flavors
7801 instruct membar_acquire() %{
7802 match(MemBarAcquire);
7803 ins_cost(400);
7805 size(0);
7806 format %{ "MEMBAR-acquire ! (empty encoding)" %}
7807 ins_encode();
7808 ins_pipe(empty);
7809 %}
7811 instruct membar_acquire_lock() %{
7812 match(MemBarAcquire);
7813 predicate(Matcher::prior_fast_lock(n));
7814 ins_cost(0);
7816 size(0);
7817 format %{ "MEMBAR-acquire (prior CMPXCHG in FastLock so empty encoding)" %}
7818 ins_encode( );
7819 ins_pipe(empty);
7820 %}
7822 instruct membar_release() %{
7823 match(MemBarRelease);
7824 ins_cost(400);
7826 size(0);
7827 format %{ "MEMBAR-release ! (empty encoding)" %}
7828 ins_encode( );
7829 ins_pipe(empty);
7830 %}
7832 instruct membar_release_lock() %{
7833 match(MemBarRelease);
7834 predicate(Matcher::post_fast_unlock(n));
7835 ins_cost(0);
7837 size(0);
7838 format %{ "MEMBAR-release (a FastUnlock follows so empty encoding)" %}
7839 ins_encode( );
7840 ins_pipe(empty);
7841 %}
7843 instruct membar_volatile(eFlagsReg cr) %{
7844 match(MemBarVolatile);
7845 effect(KILL cr);
7846 ins_cost(400);
7848 format %{
7849 $$template
7850 if (os::is_MP()) {
7851 $$emit$$"LOCK ADDL [ESP + #0], 0\t! membar_volatile"
7852 } else {
7853 $$emit$$"MEMBAR-volatile ! (empty encoding)"
7854 }
7855 %}
7856 ins_encode %{
7857 __ membar(Assembler::StoreLoad);
7858 %}
7859 ins_pipe(pipe_slow);
7860 %}
7862 instruct unnecessary_membar_volatile() %{
7863 match(MemBarVolatile);
7864 predicate(Matcher::post_store_load_barrier(n));
7865 ins_cost(0);
7867 size(0);
7868 format %{ "MEMBAR-volatile (unnecessary so empty encoding)" %}
7869 ins_encode( );
7870 ins_pipe(empty);
7871 %}
7873 //----------Move Instructions--------------------------------------------------
7874 instruct castX2P(eAXRegP dst, eAXRegI src) %{
7875 match(Set dst (CastX2P src));
7876 format %{ "# X2P $dst, $src" %}
7877 ins_encode( /*empty encoding*/ );
7878 ins_cost(0);
7879 ins_pipe(empty);
7880 %}
7882 instruct castP2X(eRegI dst, eRegP src ) %{
7883 match(Set dst (CastP2X src));
7884 ins_cost(50);
7885 format %{ "MOV $dst, $src\t# CastP2X" %}
7886 ins_encode( enc_Copy( dst, src) );
7887 ins_pipe( ialu_reg_reg );
7888 %}
7890 //----------Conditional Move---------------------------------------------------
7891 // Conditional move
7892 instruct cmovI_reg(eRegI dst, eRegI src, eFlagsReg cr, cmpOp cop ) %{
7893 predicate(VM_Version::supports_cmov() );
7894 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7895 ins_cost(200);
7896 format %{ "CMOV$cop $dst,$src" %}
7897 opcode(0x0F,0x40);
7898 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7899 ins_pipe( pipe_cmov_reg );
7900 %}
7902 instruct cmovI_regU( cmpOpU cop, eFlagsRegU cr, eRegI dst, eRegI src ) %{
7903 predicate(VM_Version::supports_cmov() );
7904 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7905 ins_cost(200);
7906 format %{ "CMOV$cop $dst,$src" %}
7907 opcode(0x0F,0x40);
7908 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7909 ins_pipe( pipe_cmov_reg );
7910 %}
7912 instruct cmovI_regUCF( cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, eRegI src ) %{
7913 predicate(VM_Version::supports_cmov() );
7914 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7915 ins_cost(200);
7916 expand %{
7917 cmovI_regU(cop, cr, dst, src);
7918 %}
7919 %}
7921 // Conditional move
7922 instruct cmovI_mem(cmpOp cop, eFlagsReg cr, eRegI dst, memory src) %{
7923 predicate(VM_Version::supports_cmov() );
7924 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7925 ins_cost(250);
7926 format %{ "CMOV$cop $dst,$src" %}
7927 opcode(0x0F,0x40);
7928 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7929 ins_pipe( pipe_cmov_mem );
7930 %}
7932 // Conditional move
7933 instruct cmovI_memU(cmpOpU cop, eFlagsRegU cr, eRegI dst, memory src) %{
7934 predicate(VM_Version::supports_cmov() );
7935 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7936 ins_cost(250);
7937 format %{ "CMOV$cop $dst,$src" %}
7938 opcode(0x0F,0x40);
7939 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7940 ins_pipe( pipe_cmov_mem );
7941 %}
7943 instruct cmovI_memUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, memory src) %{
7944 predicate(VM_Version::supports_cmov() );
7945 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7946 ins_cost(250);
7947 expand %{
7948 cmovI_memU(cop, cr, dst, src);
7949 %}
7950 %}
7952 // Conditional move
7953 instruct cmovP_reg(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7954 predicate(VM_Version::supports_cmov() );
7955 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7956 ins_cost(200);
7957 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7958 opcode(0x0F,0x40);
7959 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7960 ins_pipe( pipe_cmov_reg );
7961 %}
7963 // Conditional move (non-P6 version)
7964 // Note: a CMoveP is generated for stubs and native wrappers
7965 // regardless of whether we are on a P6, so we
7966 // emulate a cmov here
7967 instruct cmovP_reg_nonP6(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7968 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7969 ins_cost(300);
7970 format %{ "Jn$cop skip\n\t"
7971 "MOV $dst,$src\t# pointer\n"
7972 "skip:" %}
7973 opcode(0x8b);
7974 ins_encode( enc_cmov_branch(cop, 0x2), OpcP, RegReg(dst, src));
7975 ins_pipe( pipe_cmov_reg );
7976 %}
7978 // Conditional move
7979 instruct cmovP_regU(cmpOpU cop, eFlagsRegU cr, eRegP dst, eRegP src ) %{
7980 predicate(VM_Version::supports_cmov() );
7981 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7982 ins_cost(200);
7983 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7984 opcode(0x0F,0x40);
7985 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7986 ins_pipe( pipe_cmov_reg );
7987 %}
7989 instruct cmovP_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegP dst, eRegP src ) %{
7990 predicate(VM_Version::supports_cmov() );
7991 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7992 ins_cost(200);
7993 expand %{
7994 cmovP_regU(cop, cr, dst, src);
7995 %}
7996 %}
7998 // DISABLED: Requires the ADLC to emit a bottom_type call that
7999 // correctly meets the two pointer arguments; one is an incoming
8000 // register but the other is a memory operand. ALSO appears to
8001 // be buggy with implicit null checks.
8002 //
8003 //// Conditional move
8004 //instruct cmovP_mem(cmpOp cop, eFlagsReg cr, eRegP dst, memory src) %{
8005 // predicate(VM_Version::supports_cmov() );
8006 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
8007 // ins_cost(250);
8008 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
8009 // opcode(0x0F,0x40);
8010 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
8011 // ins_pipe( pipe_cmov_mem );
8012 //%}
8013 //
8014 //// Conditional move
8015 //instruct cmovP_memU(cmpOpU cop, eFlagsRegU cr, eRegP dst, memory src) %{
8016 // predicate(VM_Version::supports_cmov() );
8017 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
8018 // ins_cost(250);
8019 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
8020 // opcode(0x0F,0x40);
8021 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
8022 // ins_pipe( pipe_cmov_mem );
8023 //%}
8025 // Conditional move
8026 instruct fcmovD_regU(cmpOp_fcmov cop, eFlagsRegU cr, regDPR1 dst, regD src) %{
8027 predicate(UseSSE<=1);
8028 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8029 ins_cost(200);
8030 format %{ "FCMOV$cop $dst,$src\t# double" %}
8031 opcode(0xDA);
8032 ins_encode( enc_cmov_d(cop,src) );
8033 ins_pipe( pipe_cmovD_reg );
8034 %}
8036 // Conditional move
8037 instruct fcmovF_regU(cmpOp_fcmov cop, eFlagsRegU cr, regFPR1 dst, regF src) %{
8038 predicate(UseSSE==0);
8039 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8040 ins_cost(200);
8041 format %{ "FCMOV$cop $dst,$src\t# float" %}
8042 opcode(0xDA);
8043 ins_encode( enc_cmov_d(cop,src) );
8044 ins_pipe( pipe_cmovD_reg );
8045 %}
8047 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
8048 instruct fcmovD_regS(cmpOp cop, eFlagsReg cr, regD dst, regD src) %{
8049 predicate(UseSSE<=1);
8050 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8051 ins_cost(200);
8052 format %{ "Jn$cop skip\n\t"
8053 "MOV $dst,$src\t# double\n"
8054 "skip:" %}
8055 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8056 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_D(src), OpcP, RegOpc(dst) );
8057 ins_pipe( pipe_cmovD_reg );
8058 %}
8060 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
8061 instruct fcmovF_regS(cmpOp cop, eFlagsReg cr, regF dst, regF src) %{
8062 predicate(UseSSE==0);
8063 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8064 ins_cost(200);
8065 format %{ "Jn$cop skip\n\t"
8066 "MOV $dst,$src\t# float\n"
8067 "skip:" %}
8068 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8069 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_F(src), OpcP, RegOpc(dst) );
8070 ins_pipe( pipe_cmovD_reg );
8071 %}
8073 // No CMOVE with SSE/SSE2
8074 instruct fcmovX_regS(cmpOp cop, eFlagsReg cr, regX dst, regX src) %{
8075 predicate (UseSSE>=1);
8076 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8077 ins_cost(200);
8078 format %{ "Jn$cop skip\n\t"
8079 "MOVSS $dst,$src\t# float\n"
8080 "skip:" %}
8081 ins_encode %{
8082 Label skip;
8083 // Invert sense of branch from sense of CMOV
8084 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8085 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8086 __ bind(skip);
8087 %}
8088 ins_pipe( pipe_slow );
8089 %}
8091 // No CMOVE with SSE/SSE2
8092 instruct fcmovXD_regS(cmpOp cop, eFlagsReg cr, regXD dst, regXD src) %{
8093 predicate (UseSSE>=2);
8094 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8095 ins_cost(200);
8096 format %{ "Jn$cop skip\n\t"
8097 "MOVSD $dst,$src\t# float\n"
8098 "skip:" %}
8099 ins_encode %{
8100 Label skip;
8101 // Invert sense of branch from sense of CMOV
8102 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8103 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8104 __ bind(skip);
8105 %}
8106 ins_pipe( pipe_slow );
8107 %}
8109 // unsigned version
8110 instruct fcmovX_regU(cmpOpU cop, eFlagsRegU cr, regX dst, regX src) %{
8111 predicate (UseSSE>=1);
8112 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8113 ins_cost(200);
8114 format %{ "Jn$cop skip\n\t"
8115 "MOVSS $dst,$src\t# float\n"
8116 "skip:" %}
8117 ins_encode %{
8118 Label skip;
8119 // Invert sense of branch from sense of CMOV
8120 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8121 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8122 __ bind(skip);
8123 %}
8124 ins_pipe( pipe_slow );
8125 %}
8127 instruct fcmovX_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regX dst, regX src) %{
8128 predicate (UseSSE>=1);
8129 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8130 ins_cost(200);
8131 expand %{
8132 fcmovX_regU(cop, cr, dst, src);
8133 %}
8134 %}
8136 // unsigned version
8137 instruct fcmovXD_regU(cmpOpU cop, eFlagsRegU cr, regXD dst, regXD src) %{
8138 predicate (UseSSE>=2);
8139 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8140 ins_cost(200);
8141 format %{ "Jn$cop skip\n\t"
8142 "MOVSD $dst,$src\t# float\n"
8143 "skip:" %}
8144 ins_encode %{
8145 Label skip;
8146 // Invert sense of branch from sense of CMOV
8147 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8148 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8149 __ bind(skip);
8150 %}
8151 ins_pipe( pipe_slow );
8152 %}
8154 instruct fcmovXD_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regXD dst, regXD src) %{
8155 predicate (UseSSE>=2);
8156 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8157 ins_cost(200);
8158 expand %{
8159 fcmovXD_regU(cop, cr, dst, src);
8160 %}
8161 %}
8163 instruct cmovL_reg(cmpOp cop, eFlagsReg cr, eRegL dst, eRegL src) %{
8164 predicate(VM_Version::supports_cmov() );
8165 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8166 ins_cost(200);
8167 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8168 "CMOV$cop $dst.hi,$src.hi" %}
8169 opcode(0x0F,0x40);
8170 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8171 ins_pipe( pipe_cmov_reg_long );
8172 %}
8174 instruct cmovL_regU(cmpOpU cop, eFlagsRegU cr, eRegL dst, eRegL src) %{
8175 predicate(VM_Version::supports_cmov() );
8176 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8177 ins_cost(200);
8178 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8179 "CMOV$cop $dst.hi,$src.hi" %}
8180 opcode(0x0F,0x40);
8181 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8182 ins_pipe( pipe_cmov_reg_long );
8183 %}
8185 instruct cmovL_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegL dst, eRegL src) %{
8186 predicate(VM_Version::supports_cmov() );
8187 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8188 ins_cost(200);
8189 expand %{
8190 cmovL_regU(cop, cr, dst, src);
8191 %}
8192 %}
8194 //----------Arithmetic Instructions--------------------------------------------
8195 //----------Addition Instructions----------------------------------------------
8196 // Integer Addition Instructions
8197 instruct addI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8198 match(Set dst (AddI dst src));
8199 effect(KILL cr);
8201 size(2);
8202 format %{ "ADD $dst,$src" %}
8203 opcode(0x03);
8204 ins_encode( OpcP, RegReg( dst, src) );
8205 ins_pipe( ialu_reg_reg );
8206 %}
8208 instruct addI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8209 match(Set dst (AddI dst src));
8210 effect(KILL cr);
8212 format %{ "ADD $dst,$src" %}
8213 opcode(0x81, 0x00); /* /0 id */
8214 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8215 ins_pipe( ialu_reg );
8216 %}
8218 instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
8219 predicate(UseIncDec);
8220 match(Set dst (AddI dst src));
8221 effect(KILL cr);
8223 size(1);
8224 format %{ "INC $dst" %}
8225 opcode(0x40); /* */
8226 ins_encode( Opc_plus( primary, dst ) );
8227 ins_pipe( ialu_reg );
8228 %}
8230 instruct leaI_eReg_immI(eRegI dst, eRegI src0, immI src1) %{
8231 match(Set dst (AddI src0 src1));
8232 ins_cost(110);
8234 format %{ "LEA $dst,[$src0 + $src1]" %}
8235 opcode(0x8D); /* 0x8D /r */
8236 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8237 ins_pipe( ialu_reg_reg );
8238 %}
8240 instruct leaP_eReg_immI(eRegP dst, eRegP src0, immI src1) %{
8241 match(Set dst (AddP src0 src1));
8242 ins_cost(110);
8244 format %{ "LEA $dst,[$src0 + $src1]\t# ptr" %}
8245 opcode(0x8D); /* 0x8D /r */
8246 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8247 ins_pipe( ialu_reg_reg );
8248 %}
8250 instruct decI_eReg(eRegI dst, immI_M1 src, eFlagsReg cr) %{
8251 predicate(UseIncDec);
8252 match(Set dst (AddI dst src));
8253 effect(KILL cr);
8255 size(1);
8256 format %{ "DEC $dst" %}
8257 opcode(0x48); /* */
8258 ins_encode( Opc_plus( primary, dst ) );
8259 ins_pipe( ialu_reg );
8260 %}
8262 instruct addP_eReg(eRegP dst, eRegI src, eFlagsReg cr) %{
8263 match(Set dst (AddP dst src));
8264 effect(KILL cr);
8266 size(2);
8267 format %{ "ADD $dst,$src" %}
8268 opcode(0x03);
8269 ins_encode( OpcP, RegReg( dst, src) );
8270 ins_pipe( ialu_reg_reg );
8271 %}
8273 instruct addP_eReg_imm(eRegP dst, immI src, eFlagsReg cr) %{
8274 match(Set dst (AddP dst src));
8275 effect(KILL cr);
8277 format %{ "ADD $dst,$src" %}
8278 opcode(0x81,0x00); /* Opcode 81 /0 id */
8279 // ins_encode( RegImm( dst, src) );
8280 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8281 ins_pipe( ialu_reg );
8282 %}
8284 instruct addI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8285 match(Set dst (AddI dst (LoadI src)));
8286 effect(KILL cr);
8288 ins_cost(125);
8289 format %{ "ADD $dst,$src" %}
8290 opcode(0x03);
8291 ins_encode( OpcP, RegMem( dst, src) );
8292 ins_pipe( ialu_reg_mem );
8293 %}
8295 instruct addI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8296 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8297 effect(KILL cr);
8299 ins_cost(150);
8300 format %{ "ADD $dst,$src" %}
8301 opcode(0x01); /* Opcode 01 /r */
8302 ins_encode( OpcP, RegMem( src, dst ) );
8303 ins_pipe( ialu_mem_reg );
8304 %}
8306 // Add Memory with Immediate
8307 instruct addI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8308 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8309 effect(KILL cr);
8311 ins_cost(125);
8312 format %{ "ADD $dst,$src" %}
8313 opcode(0x81); /* Opcode 81 /0 id */
8314 ins_encode( OpcSE( src ), RMopc_Mem(0x00,dst), Con8or32( src ) );
8315 ins_pipe( ialu_mem_imm );
8316 %}
8318 instruct incI_mem(memory dst, immI1 src, eFlagsReg cr) %{
8319 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8320 effect(KILL cr);
8322 ins_cost(125);
8323 format %{ "INC $dst" %}
8324 opcode(0xFF); /* Opcode FF /0 */
8325 ins_encode( OpcP, RMopc_Mem(0x00,dst));
8326 ins_pipe( ialu_mem_imm );
8327 %}
8329 instruct decI_mem(memory dst, immI_M1 src, eFlagsReg cr) %{
8330 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8331 effect(KILL cr);
8333 ins_cost(125);
8334 format %{ "DEC $dst" %}
8335 opcode(0xFF); /* Opcode FF /1 */
8336 ins_encode( OpcP, RMopc_Mem(0x01,dst));
8337 ins_pipe( ialu_mem_imm );
8338 %}
8341 instruct checkCastPP( eRegP dst ) %{
8342 match(Set dst (CheckCastPP dst));
8344 size(0);
8345 format %{ "#checkcastPP of $dst" %}
8346 ins_encode( /*empty encoding*/ );
8347 ins_pipe( empty );
8348 %}
8350 instruct castPP( eRegP dst ) %{
8351 match(Set dst (CastPP dst));
8352 format %{ "#castPP of $dst" %}
8353 ins_encode( /*empty encoding*/ );
8354 ins_pipe( empty );
8355 %}
8357 instruct castII( eRegI dst ) %{
8358 match(Set dst (CastII dst));
8359 format %{ "#castII of $dst" %}
8360 ins_encode( /*empty encoding*/ );
8361 ins_cost(0);
8362 ins_pipe( empty );
8363 %}
8366 // Load-locked - same as a regular pointer load when used with compare-swap
8367 instruct loadPLocked(eRegP dst, memory mem) %{
8368 match(Set dst (LoadPLocked mem));
8370 ins_cost(125);
8371 format %{ "MOV $dst,$mem\t# Load ptr. locked" %}
8372 opcode(0x8B);
8373 ins_encode( OpcP, RegMem(dst,mem));
8374 ins_pipe( ialu_reg_mem );
8375 %}
8377 // LoadLong-locked - same as a volatile long load when used with compare-swap
8378 instruct loadLLocked(stackSlotL dst, load_long_memory mem) %{
8379 predicate(UseSSE<=1);
8380 match(Set dst (LoadLLocked mem));
8382 ins_cost(200);
8383 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
8384 "FISTp $dst" %}
8385 ins_encode(enc_loadL_volatile(mem,dst));
8386 ins_pipe( fpu_reg_mem );
8387 %}
8389 instruct loadLX_Locked(stackSlotL dst, load_long_memory mem, regXD tmp) %{
8390 predicate(UseSSE>=2);
8391 match(Set dst (LoadLLocked mem));
8392 effect(TEMP tmp);
8393 ins_cost(180);
8394 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8395 "MOVSD $dst,$tmp" %}
8396 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
8397 ins_pipe( pipe_slow );
8398 %}
8400 instruct loadLX_reg_Locked(eRegL dst, load_long_memory mem, regXD tmp) %{
8401 predicate(UseSSE>=2);
8402 match(Set dst (LoadLLocked mem));
8403 effect(TEMP tmp);
8404 ins_cost(160);
8405 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8406 "MOVD $dst.lo,$tmp\n\t"
8407 "PSRLQ $tmp,32\n\t"
8408 "MOVD $dst.hi,$tmp" %}
8409 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
8410 ins_pipe( pipe_slow );
8411 %}
8413 // Conditional-store of the updated heap-top.
8414 // Used during allocation of the shared heap.
8415 // Sets flags (EQ) on success. Implemented with a CMPXCHG on Intel.
8416 instruct storePConditional( memory heap_top_ptr, eAXRegP oldval, eRegP newval, eFlagsReg cr ) %{
8417 match(Set cr (StorePConditional heap_top_ptr (Binary oldval newval)));
8418 // EAX is killed if there is contention, but then it's also unused.
8419 // In the common case of no contention, EAX holds the new oop address.
8420 format %{ "CMPXCHG $heap_top_ptr,$newval\t# If EAX==$heap_top_ptr Then store $newval into $heap_top_ptr" %}
8421 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval,heap_top_ptr) );
8422 ins_pipe( pipe_cmpxchg );
8423 %}
8425 // Conditional-store of an int value.
8426 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG on Intel.
8427 instruct storeIConditional( memory mem, eAXRegI oldval, eRegI newval, eFlagsReg cr ) %{
8428 match(Set cr (StoreIConditional mem (Binary oldval newval)));
8429 effect(KILL oldval);
8430 format %{ "CMPXCHG $mem,$newval\t# If EAX==$mem Then store $newval into $mem" %}
8431 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval, mem) );
8432 ins_pipe( pipe_cmpxchg );
8433 %}
8435 // Conditional-store of a long value.
8436 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG8 on Intel.
8437 instruct storeLConditional( memory mem, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8438 match(Set cr (StoreLConditional mem (Binary oldval newval)));
8439 effect(KILL oldval);
8440 format %{ "XCHG EBX,ECX\t# correct order for CMPXCHG8 instruction\n\t"
8441 "CMPXCHG8 $mem,ECX:EBX\t# If EDX:EAX==$mem Then store ECX:EBX into $mem\n\t"
8442 "XCHG EBX,ECX"
8443 %}
8444 ins_encode %{
8445 // Note: we need to swap rbx, and rcx before and after the
8446 // cmpxchg8 instruction because the instruction uses
8447 // rcx as the high order word of the new value to store but
8448 // our register encoding uses rbx.
8449 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8450 if( os::is_MP() )
8451 __ lock();
8452 __ cmpxchg8($mem$$Address);
8453 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8454 %}
8455 ins_pipe( pipe_cmpxchg );
8456 %}
8458 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them
8460 instruct compareAndSwapL( eRegI res, eSIRegP mem_ptr, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8461 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval)));
8462 effect(KILL cr, KILL oldval);
8463 format %{ "CMPXCHG8 [$mem_ptr],$newval\t# If EDX:EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8464 "MOV $res,0\n\t"
8465 "JNE,s fail\n\t"
8466 "MOV $res,1\n"
8467 "fail:" %}
8468 ins_encode( enc_cmpxchg8(mem_ptr),
8469 enc_flags_ne_to_boolean(res) );
8470 ins_pipe( pipe_cmpxchg );
8471 %}
8473 instruct compareAndSwapP( eRegI res, pRegP mem_ptr, eAXRegP oldval, eCXRegP newval, eFlagsReg cr) %{
8474 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval)));
8475 effect(KILL cr, KILL oldval);
8476 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8477 "MOV $res,0\n\t"
8478 "JNE,s fail\n\t"
8479 "MOV $res,1\n"
8480 "fail:" %}
8481 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8482 ins_pipe( pipe_cmpxchg );
8483 %}
8485 instruct compareAndSwapI( eRegI res, pRegP mem_ptr, eAXRegI oldval, eCXRegI newval, eFlagsReg cr) %{
8486 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval)));
8487 effect(KILL cr, KILL oldval);
8488 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8489 "MOV $res,0\n\t"
8490 "JNE,s fail\n\t"
8491 "MOV $res,1\n"
8492 "fail:" %}
8493 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8494 ins_pipe( pipe_cmpxchg );
8495 %}
8497 //----------Subtraction Instructions-------------------------------------------
8498 // Integer Subtraction Instructions
8499 instruct subI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8500 match(Set dst (SubI dst src));
8501 effect(KILL cr);
8503 size(2);
8504 format %{ "SUB $dst,$src" %}
8505 opcode(0x2B);
8506 ins_encode( OpcP, RegReg( dst, src) );
8507 ins_pipe( ialu_reg_reg );
8508 %}
8510 instruct subI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8511 match(Set dst (SubI dst src));
8512 effect(KILL cr);
8514 format %{ "SUB $dst,$src" %}
8515 opcode(0x81,0x05); /* Opcode 81 /5 */
8516 // ins_encode( RegImm( dst, src) );
8517 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8518 ins_pipe( ialu_reg );
8519 %}
8521 instruct subI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8522 match(Set dst (SubI dst (LoadI src)));
8523 effect(KILL cr);
8525 ins_cost(125);
8526 format %{ "SUB $dst,$src" %}
8527 opcode(0x2B);
8528 ins_encode( OpcP, RegMem( dst, src) );
8529 ins_pipe( ialu_reg_mem );
8530 %}
8532 instruct subI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8533 match(Set dst (StoreI dst (SubI (LoadI dst) src)));
8534 effect(KILL cr);
8536 ins_cost(150);
8537 format %{ "SUB $dst,$src" %}
8538 opcode(0x29); /* Opcode 29 /r */
8539 ins_encode( OpcP, RegMem( src, dst ) );
8540 ins_pipe( ialu_mem_reg );
8541 %}
8543 // Subtract from a pointer
8544 instruct subP_eReg(eRegP dst, eRegI src, immI0 zero, eFlagsReg cr) %{
8545 match(Set dst (AddP dst (SubI zero src)));
8546 effect(KILL cr);
8548 size(2);
8549 format %{ "SUB $dst,$src" %}
8550 opcode(0x2B);
8551 ins_encode( OpcP, RegReg( dst, src) );
8552 ins_pipe( ialu_reg_reg );
8553 %}
8555 instruct negI_eReg(eRegI dst, immI0 zero, eFlagsReg cr) %{
8556 match(Set dst (SubI zero dst));
8557 effect(KILL cr);
8559 size(2);
8560 format %{ "NEG $dst" %}
8561 opcode(0xF7,0x03); // Opcode F7 /3
8562 ins_encode( OpcP, RegOpc( dst ) );
8563 ins_pipe( ialu_reg );
8564 %}
8567 //----------Multiplication/Division Instructions-------------------------------
8568 // Integer Multiplication Instructions
8569 // Multiply Register
8570 instruct mulI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8571 match(Set dst (MulI dst src));
8572 effect(KILL cr);
8574 size(3);
8575 ins_cost(300);
8576 format %{ "IMUL $dst,$src" %}
8577 opcode(0xAF, 0x0F);
8578 ins_encode( OpcS, OpcP, RegReg( dst, src) );
8579 ins_pipe( ialu_reg_reg_alu0 );
8580 %}
8582 // Multiply 32-bit Immediate
8583 instruct mulI_eReg_imm(eRegI dst, eRegI src, immI imm, eFlagsReg cr) %{
8584 match(Set dst (MulI src imm));
8585 effect(KILL cr);
8587 ins_cost(300);
8588 format %{ "IMUL $dst,$src,$imm" %}
8589 opcode(0x69); /* 69 /r id */
8590 ins_encode( OpcSE(imm), RegReg( dst, src ), Con8or32( imm ) );
8591 ins_pipe( ialu_reg_reg_alu0 );
8592 %}
8594 instruct loadConL_low_only(eADXRegL_low_only dst, immL32 src, eFlagsReg cr) %{
8595 match(Set dst src);
8596 effect(KILL cr);
8598 // Note that this is artificially increased to make it more expensive than loadConL
8599 ins_cost(250);
8600 format %{ "MOV EAX,$src\t// low word only" %}
8601 opcode(0xB8);
8602 ins_encode( LdImmL_Lo(dst, src) );
8603 ins_pipe( ialu_reg_fat );
8604 %}
8606 // Multiply by 32-bit Immediate, taking the shifted high order results
8607 // (special case for shift by 32)
8608 instruct mulI_imm_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32 cnt, eFlagsReg cr) %{
8609 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8610 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8611 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8612 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8613 effect(USE src1, KILL cr);
8615 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8616 ins_cost(0*100 + 1*400 - 150);
8617 format %{ "IMUL EDX:EAX,$src1" %}
8618 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8619 ins_pipe( pipe_slow );
8620 %}
8622 // Multiply by 32-bit Immediate, taking the shifted high order results
8623 instruct mulI_imm_RShift_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr) %{
8624 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8625 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8626 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8627 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8628 effect(USE src1, KILL cr);
8630 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8631 ins_cost(1*100 + 1*400 - 150);
8632 format %{ "IMUL EDX:EAX,$src1\n\t"
8633 "SAR EDX,$cnt-32" %}
8634 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8635 ins_pipe( pipe_slow );
8636 %}
8638 // Multiply Memory 32-bit Immediate
8639 instruct mulI_mem_imm(eRegI dst, memory src, immI imm, eFlagsReg cr) %{
8640 match(Set dst (MulI (LoadI src) imm));
8641 effect(KILL cr);
8643 ins_cost(300);
8644 format %{ "IMUL $dst,$src,$imm" %}
8645 opcode(0x69); /* 69 /r id */
8646 ins_encode( OpcSE(imm), RegMem( dst, src ), Con8or32( imm ) );
8647 ins_pipe( ialu_reg_mem_alu0 );
8648 %}
8650 // Multiply Memory
8651 instruct mulI(eRegI dst, memory src, eFlagsReg cr) %{
8652 match(Set dst (MulI dst (LoadI src)));
8653 effect(KILL cr);
8655 ins_cost(350);
8656 format %{ "IMUL $dst,$src" %}
8657 opcode(0xAF, 0x0F);
8658 ins_encode( OpcS, OpcP, RegMem( dst, src) );
8659 ins_pipe( ialu_reg_mem_alu0 );
8660 %}
8662 // Multiply Register Int to Long
8663 instruct mulI2L(eADXRegL dst, eAXRegI src, nadxRegI src1, eFlagsReg flags) %{
8664 // Basic Idea: long = (long)int * (long)int
8665 match(Set dst (MulL (ConvI2L src) (ConvI2L src1)));
8666 effect(DEF dst, USE src, USE src1, KILL flags);
8668 ins_cost(300);
8669 format %{ "IMUL $dst,$src1" %}
8671 ins_encode( long_int_multiply( dst, src1 ) );
8672 ins_pipe( ialu_reg_reg_alu0 );
8673 %}
8675 instruct mulIS_eReg(eADXRegL dst, immL_32bits mask, eFlagsReg flags, eAXRegI src, nadxRegI src1) %{
8676 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
8677 match(Set dst (MulL (AndL (ConvI2L src) mask) (AndL (ConvI2L src1) mask)));
8678 effect(KILL flags);
8680 ins_cost(300);
8681 format %{ "MUL $dst,$src1" %}
8683 ins_encode( long_uint_multiply(dst, src1) );
8684 ins_pipe( ialu_reg_reg_alu0 );
8685 %}
8687 // Multiply Register Long
8688 instruct mulL_eReg(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8689 match(Set dst (MulL dst src));
8690 effect(KILL cr, TEMP tmp);
8691 ins_cost(4*100+3*400);
8692 // Basic idea: lo(result) = lo(x_lo * y_lo)
8693 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
8694 format %{ "MOV $tmp,$src.lo\n\t"
8695 "IMUL $tmp,EDX\n\t"
8696 "MOV EDX,$src.hi\n\t"
8697 "IMUL EDX,EAX\n\t"
8698 "ADD $tmp,EDX\n\t"
8699 "MUL EDX:EAX,$src.lo\n\t"
8700 "ADD EDX,$tmp" %}
8701 ins_encode( long_multiply( dst, src, tmp ) );
8702 ins_pipe( pipe_slow );
8703 %}
8705 // Multiply Register Long where the left operand's high 32 bits are zero
8706 instruct mulL_eReg_lhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8707 predicate(is_operand_hi32_zero(n->in(1)));
8708 match(Set dst (MulL dst src));
8709 effect(KILL cr, TEMP tmp);
8710 ins_cost(2*100+2*400);
8711 // Basic idea: lo(result) = lo(x_lo * y_lo)
8712 // hi(result) = hi(x_lo * y_lo) + lo(x_lo * y_hi) where lo(x_hi * y_lo) = 0 because x_hi = 0
8713 format %{ "MOV $tmp,$src.hi\n\t"
8714 "IMUL $tmp,EAX\n\t"
8715 "MUL EDX:EAX,$src.lo\n\t"
8716 "ADD EDX,$tmp" %}
8717 ins_encode %{
8718 __ movl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
8719 __ imull($tmp$$Register, rax);
8720 __ mull($src$$Register);
8721 __ addl(rdx, $tmp$$Register);
8722 %}
8723 ins_pipe( pipe_slow );
8724 %}
8726 // Multiply Register Long where the right operand's high 32 bits are zero
8727 instruct mulL_eReg_rhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8728 predicate(is_operand_hi32_zero(n->in(2)));
8729 match(Set dst (MulL dst src));
8730 effect(KILL cr, TEMP tmp);
8731 ins_cost(2*100+2*400);
8732 // Basic idea: lo(result) = lo(x_lo * y_lo)
8733 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) where lo(x_lo * y_hi) = 0 because y_hi = 0
8734 format %{ "MOV $tmp,$src.lo\n\t"
8735 "IMUL $tmp,EDX\n\t"
8736 "MUL EDX:EAX,$src.lo\n\t"
8737 "ADD EDX,$tmp" %}
8738 ins_encode %{
8739 __ movl($tmp$$Register, $src$$Register);
8740 __ imull($tmp$$Register, rdx);
8741 __ mull($src$$Register);
8742 __ addl(rdx, $tmp$$Register);
8743 %}
8744 ins_pipe( pipe_slow );
8745 %}
8747 // Multiply Register Long where the left and the right operands' high 32 bits are zero
8748 instruct mulL_eReg_hi0(eADXRegL dst, eRegL src, eFlagsReg cr) %{
8749 predicate(is_operand_hi32_zero(n->in(1)) && is_operand_hi32_zero(n->in(2)));
8750 match(Set dst (MulL dst src));
8751 effect(KILL cr);
8752 ins_cost(1*400);
8753 // Basic idea: lo(result) = lo(x_lo * y_lo)
8754 // hi(result) = hi(x_lo * y_lo) where lo(x_hi * y_lo) = 0 and lo(x_lo * y_hi) = 0 because x_hi = 0 and y_hi = 0
8755 format %{ "MUL EDX:EAX,$src.lo\n\t" %}
8756 ins_encode %{
8757 __ mull($src$$Register);
8758 %}
8759 ins_pipe( pipe_slow );
8760 %}
8762 // Multiply Register Long by small constant
8763 instruct mulL_eReg_con(eADXRegL dst, immL_127 src, eRegI tmp, eFlagsReg cr) %{
8764 match(Set dst (MulL dst src));
8765 effect(KILL cr, TEMP tmp);
8766 ins_cost(2*100+2*400);
8767 size(12);
8768 // Basic idea: lo(result) = lo(src * EAX)
8769 // hi(result) = hi(src * EAX) + lo(src * EDX)
8770 format %{ "IMUL $tmp,EDX,$src\n\t"
8771 "MOV EDX,$src\n\t"
8772 "MUL EDX\t# EDX*EAX -> EDX:EAX\n\t"
8773 "ADD EDX,$tmp" %}
8774 ins_encode( long_multiply_con( dst, src, tmp ) );
8775 ins_pipe( pipe_slow );
8776 %}
8778 // Integer DIV with Register
8779 instruct divI_eReg(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8780 match(Set rax (DivI rax div));
8781 effect(KILL rdx, KILL cr);
8782 size(26);
8783 ins_cost(30*100+10*100);
8784 format %{ "CMP EAX,0x80000000\n\t"
8785 "JNE,s normal\n\t"
8786 "XOR EDX,EDX\n\t"
8787 "CMP ECX,-1\n\t"
8788 "JE,s done\n"
8789 "normal: CDQ\n\t"
8790 "IDIV $div\n\t"
8791 "done:" %}
8792 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8793 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8794 ins_pipe( ialu_reg_reg_alu0 );
8795 %}
8797 // Divide Register Long
8798 instruct divL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8799 match(Set dst (DivL src1 src2));
8800 effect( KILL cr, KILL cx, KILL bx );
8801 ins_cost(10000);
8802 format %{ "PUSH $src1.hi\n\t"
8803 "PUSH $src1.lo\n\t"
8804 "PUSH $src2.hi\n\t"
8805 "PUSH $src2.lo\n\t"
8806 "CALL SharedRuntime::ldiv\n\t"
8807 "ADD ESP,16" %}
8808 ins_encode( long_div(src1,src2) );
8809 ins_pipe( pipe_slow );
8810 %}
8812 // Integer DIVMOD with Register, both quotient and mod results
8813 instruct divModI_eReg_divmod(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8814 match(DivModI rax div);
8815 effect(KILL cr);
8816 size(26);
8817 ins_cost(30*100+10*100);
8818 format %{ "CMP EAX,0x80000000\n\t"
8819 "JNE,s normal\n\t"
8820 "XOR EDX,EDX\n\t"
8821 "CMP ECX,-1\n\t"
8822 "JE,s done\n"
8823 "normal: CDQ\n\t"
8824 "IDIV $div\n\t"
8825 "done:" %}
8826 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8827 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8828 ins_pipe( pipe_slow );
8829 %}
8831 // Integer MOD with Register
8832 instruct modI_eReg(eDXRegI rdx, eAXRegI rax, eCXRegI div, eFlagsReg cr) %{
8833 match(Set rdx (ModI rax div));
8834 effect(KILL rax, KILL cr);
8836 size(26);
8837 ins_cost(300);
8838 format %{ "CDQ\n\t"
8839 "IDIV $div" %}
8840 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8841 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8842 ins_pipe( ialu_reg_reg_alu0 );
8843 %}
8845 // Remainder Register Long
8846 instruct modL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8847 match(Set dst (ModL src1 src2));
8848 effect( KILL cr, KILL cx, KILL bx );
8849 ins_cost(10000);
8850 format %{ "PUSH $src1.hi\n\t"
8851 "PUSH $src1.lo\n\t"
8852 "PUSH $src2.hi\n\t"
8853 "PUSH $src2.lo\n\t"
8854 "CALL SharedRuntime::lrem\n\t"
8855 "ADD ESP,16" %}
8856 ins_encode( long_mod(src1,src2) );
8857 ins_pipe( pipe_slow );
8858 %}
8860 // Divide Register Long (no special case since divisor != -1)
8861 instruct divL_eReg_imm32( eADXRegL dst, immL32 imm, eRegI tmp, eRegI tmp2, eFlagsReg cr ) %{
8862 match(Set dst (DivL dst imm));
8863 effect( TEMP tmp, TEMP tmp2, KILL cr );
8864 ins_cost(1000);
8865 format %{ "MOV $tmp,abs($imm) # ldiv EDX:EAX,$imm\n\t"
8866 "XOR $tmp2,$tmp2\n\t"
8867 "CMP $tmp,EDX\n\t"
8868 "JA,s fast\n\t"
8869 "MOV $tmp2,EAX\n\t"
8870 "MOV EAX,EDX\n\t"
8871 "MOV EDX,0\n\t"
8872 "JLE,s pos\n\t"
8873 "LNEG EAX : $tmp2\n\t"
8874 "DIV $tmp # unsigned division\n\t"
8875 "XCHG EAX,$tmp2\n\t"
8876 "DIV $tmp\n\t"
8877 "LNEG $tmp2 : EAX\n\t"
8878 "JMP,s done\n"
8879 "pos:\n\t"
8880 "DIV $tmp\n\t"
8881 "XCHG EAX,$tmp2\n"
8882 "fast:\n\t"
8883 "DIV $tmp\n"
8884 "done:\n\t"
8885 "MOV EDX,$tmp2\n\t"
8886 "NEG EDX:EAX # if $imm < 0" %}
8887 ins_encode %{
8888 int con = (int)$imm$$constant;
8889 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8890 int pcon = (con > 0) ? con : -con;
8891 Label Lfast, Lpos, Ldone;
8893 __ movl($tmp$$Register, pcon);
8894 __ xorl($tmp2$$Register,$tmp2$$Register);
8895 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8896 __ jccb(Assembler::above, Lfast); // result fits into 32 bit
8898 __ movl($tmp2$$Register, $dst$$Register); // save
8899 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8900 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8901 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8903 // Negative dividend.
8904 // convert value to positive to use unsigned division
8905 __ lneg($dst$$Register, $tmp2$$Register);
8906 __ divl($tmp$$Register);
8907 __ xchgl($dst$$Register, $tmp2$$Register);
8908 __ divl($tmp$$Register);
8909 // revert result back to negative
8910 __ lneg($tmp2$$Register, $dst$$Register);
8911 __ jmpb(Ldone);
8913 __ bind(Lpos);
8914 __ divl($tmp$$Register); // Use unsigned division
8915 __ xchgl($dst$$Register, $tmp2$$Register);
8916 // Fallthrow for final divide, tmp2 has 32 bit hi result
8918 __ bind(Lfast);
8919 // fast path: src is positive
8920 __ divl($tmp$$Register); // Use unsigned division
8922 __ bind(Ldone);
8923 __ movl(HIGH_FROM_LOW($dst$$Register),$tmp2$$Register);
8924 if (con < 0) {
8925 __ lneg(HIGH_FROM_LOW($dst$$Register), $dst$$Register);
8926 }
8927 %}
8928 ins_pipe( pipe_slow );
8929 %}
8931 // Remainder Register Long (remainder fit into 32 bits)
8932 instruct modL_eReg_imm32( eADXRegL dst, immL32 imm, eRegI tmp, eRegI tmp2, eFlagsReg cr ) %{
8933 match(Set dst (ModL dst imm));
8934 effect( TEMP tmp, TEMP tmp2, KILL cr );
8935 ins_cost(1000);
8936 format %{ "MOV $tmp,abs($imm) # lrem EDX:EAX,$imm\n\t"
8937 "CMP $tmp,EDX\n\t"
8938 "JA,s fast\n\t"
8939 "MOV $tmp2,EAX\n\t"
8940 "MOV EAX,EDX\n\t"
8941 "MOV EDX,0\n\t"
8942 "JLE,s pos\n\t"
8943 "LNEG EAX : $tmp2\n\t"
8944 "DIV $tmp # unsigned division\n\t"
8945 "MOV EAX,$tmp2\n\t"
8946 "DIV $tmp\n\t"
8947 "NEG EDX\n\t"
8948 "JMP,s done\n"
8949 "pos:\n\t"
8950 "DIV $tmp\n\t"
8951 "MOV EAX,$tmp2\n"
8952 "fast:\n\t"
8953 "DIV $tmp\n"
8954 "done:\n\t"
8955 "MOV EAX,EDX\n\t"
8956 "SAR EDX,31\n\t" %}
8957 ins_encode %{
8958 int con = (int)$imm$$constant;
8959 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8960 int pcon = (con > 0) ? con : -con;
8961 Label Lfast, Lpos, Ldone;
8963 __ movl($tmp$$Register, pcon);
8964 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8965 __ jccb(Assembler::above, Lfast); // src is positive and result fits into 32 bit
8967 __ movl($tmp2$$Register, $dst$$Register); // save
8968 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8969 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8970 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8972 // Negative dividend.
8973 // convert value to positive to use unsigned division
8974 __ lneg($dst$$Register, $tmp2$$Register);
8975 __ divl($tmp$$Register);
8976 __ movl($dst$$Register, $tmp2$$Register);
8977 __ divl($tmp$$Register);
8978 // revert remainder back to negative
8979 __ negl(HIGH_FROM_LOW($dst$$Register));
8980 __ jmpb(Ldone);
8982 __ bind(Lpos);
8983 __ divl($tmp$$Register);
8984 __ movl($dst$$Register, $tmp2$$Register);
8986 __ bind(Lfast);
8987 // fast path: src is positive
8988 __ divl($tmp$$Register);
8990 __ bind(Ldone);
8991 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8992 __ sarl(HIGH_FROM_LOW($dst$$Register), 31); // result sign
8994 %}
8995 ins_pipe( pipe_slow );
8996 %}
8998 // Integer Shift Instructions
8999 // Shift Left by one
9000 instruct shlI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9001 match(Set dst (LShiftI dst shift));
9002 effect(KILL cr);
9004 size(2);
9005 format %{ "SHL $dst,$shift" %}
9006 opcode(0xD1, 0x4); /* D1 /4 */
9007 ins_encode( OpcP, RegOpc( dst ) );
9008 ins_pipe( ialu_reg );
9009 %}
9011 // Shift Left by 8-bit immediate
9012 instruct salI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9013 match(Set dst (LShiftI dst shift));
9014 effect(KILL cr);
9016 size(3);
9017 format %{ "SHL $dst,$shift" %}
9018 opcode(0xC1, 0x4); /* C1 /4 ib */
9019 ins_encode( RegOpcImm( dst, shift) );
9020 ins_pipe( ialu_reg );
9021 %}
9023 // Shift Left by variable
9024 instruct salI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9025 match(Set dst (LShiftI dst shift));
9026 effect(KILL cr);
9028 size(2);
9029 format %{ "SHL $dst,$shift" %}
9030 opcode(0xD3, 0x4); /* D3 /4 */
9031 ins_encode( OpcP, RegOpc( dst ) );
9032 ins_pipe( ialu_reg_reg );
9033 %}
9035 // Arithmetic shift right by one
9036 instruct sarI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9037 match(Set dst (RShiftI dst shift));
9038 effect(KILL cr);
9040 size(2);
9041 format %{ "SAR $dst,$shift" %}
9042 opcode(0xD1, 0x7); /* D1 /7 */
9043 ins_encode( OpcP, RegOpc( dst ) );
9044 ins_pipe( ialu_reg );
9045 %}
9047 // Arithmetic shift right by one
9048 instruct sarI_mem_1(memory dst, immI1 shift, eFlagsReg cr) %{
9049 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
9050 effect(KILL cr);
9051 format %{ "SAR $dst,$shift" %}
9052 opcode(0xD1, 0x7); /* D1 /7 */
9053 ins_encode( OpcP, RMopc_Mem(secondary,dst) );
9054 ins_pipe( ialu_mem_imm );
9055 %}
9057 // Arithmetic Shift Right by 8-bit immediate
9058 instruct sarI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9059 match(Set dst (RShiftI dst shift));
9060 effect(KILL cr);
9062 size(3);
9063 format %{ "SAR $dst,$shift" %}
9064 opcode(0xC1, 0x7); /* C1 /7 ib */
9065 ins_encode( RegOpcImm( dst, shift ) );
9066 ins_pipe( ialu_mem_imm );
9067 %}
9069 // Arithmetic Shift Right by 8-bit immediate
9070 instruct sarI_mem_imm(memory dst, immI8 shift, eFlagsReg cr) %{
9071 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
9072 effect(KILL cr);
9074 format %{ "SAR $dst,$shift" %}
9075 opcode(0xC1, 0x7); /* C1 /7 ib */
9076 ins_encode( OpcP, RMopc_Mem(secondary, dst ), Con8or32( shift ) );
9077 ins_pipe( ialu_mem_imm );
9078 %}
9080 // Arithmetic Shift Right by variable
9081 instruct sarI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9082 match(Set dst (RShiftI dst shift));
9083 effect(KILL cr);
9085 size(2);
9086 format %{ "SAR $dst,$shift" %}
9087 opcode(0xD3, 0x7); /* D3 /7 */
9088 ins_encode( OpcP, RegOpc( dst ) );
9089 ins_pipe( ialu_reg_reg );
9090 %}
9092 // Logical shift right by one
9093 instruct shrI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9094 match(Set dst (URShiftI dst shift));
9095 effect(KILL cr);
9097 size(2);
9098 format %{ "SHR $dst,$shift" %}
9099 opcode(0xD1, 0x5); /* D1 /5 */
9100 ins_encode( OpcP, RegOpc( dst ) );
9101 ins_pipe( ialu_reg );
9102 %}
9104 // Logical Shift Right by 8-bit immediate
9105 instruct shrI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9106 match(Set dst (URShiftI dst shift));
9107 effect(KILL cr);
9109 size(3);
9110 format %{ "SHR $dst,$shift" %}
9111 opcode(0xC1, 0x5); /* C1 /5 ib */
9112 ins_encode( RegOpcImm( dst, shift) );
9113 ins_pipe( ialu_reg );
9114 %}
9117 // Logical Shift Right by 24, followed by Arithmetic Shift Left by 24.
9118 // This idiom is used by the compiler for the i2b bytecode.
9119 instruct i2b(eRegI dst, xRegI src, immI_24 twentyfour) %{
9120 match(Set dst (RShiftI (LShiftI src twentyfour) twentyfour));
9122 size(3);
9123 format %{ "MOVSX $dst,$src :8" %}
9124 ins_encode %{
9125 __ movsbl($dst$$Register, $src$$Register);
9126 %}
9127 ins_pipe(ialu_reg_reg);
9128 %}
9130 // Logical Shift Right by 16, followed by Arithmetic Shift Left by 16.
9131 // This idiom is used by the compiler the i2s bytecode.
9132 instruct i2s(eRegI dst, xRegI src, immI_16 sixteen) %{
9133 match(Set dst (RShiftI (LShiftI src sixteen) sixteen));
9135 size(3);
9136 format %{ "MOVSX $dst,$src :16" %}
9137 ins_encode %{
9138 __ movswl($dst$$Register, $src$$Register);
9139 %}
9140 ins_pipe(ialu_reg_reg);
9141 %}
9144 // Logical Shift Right by variable
9145 instruct shrI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9146 match(Set dst (URShiftI dst shift));
9147 effect(KILL cr);
9149 size(2);
9150 format %{ "SHR $dst,$shift" %}
9151 opcode(0xD3, 0x5); /* D3 /5 */
9152 ins_encode( OpcP, RegOpc( dst ) );
9153 ins_pipe( ialu_reg_reg );
9154 %}
9157 //----------Logical Instructions-----------------------------------------------
9158 //----------Integer Logical Instructions---------------------------------------
9159 // And Instructions
9160 // And Register with Register
9161 instruct andI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9162 match(Set dst (AndI dst src));
9163 effect(KILL cr);
9165 size(2);
9166 format %{ "AND $dst,$src" %}
9167 opcode(0x23);
9168 ins_encode( OpcP, RegReg( dst, src) );
9169 ins_pipe( ialu_reg_reg );
9170 %}
9172 // And Register with Immediate
9173 instruct andI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9174 match(Set dst (AndI dst src));
9175 effect(KILL cr);
9177 format %{ "AND $dst,$src" %}
9178 opcode(0x81,0x04); /* Opcode 81 /4 */
9179 // ins_encode( RegImm( dst, src) );
9180 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9181 ins_pipe( ialu_reg );
9182 %}
9184 // And Register with Memory
9185 instruct andI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9186 match(Set dst (AndI dst (LoadI src)));
9187 effect(KILL cr);
9189 ins_cost(125);
9190 format %{ "AND $dst,$src" %}
9191 opcode(0x23);
9192 ins_encode( OpcP, RegMem( dst, src) );
9193 ins_pipe( ialu_reg_mem );
9194 %}
9196 // And Memory with Register
9197 instruct andI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9198 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9199 effect(KILL cr);
9201 ins_cost(150);
9202 format %{ "AND $dst,$src" %}
9203 opcode(0x21); /* Opcode 21 /r */
9204 ins_encode( OpcP, RegMem( src, dst ) );
9205 ins_pipe( ialu_mem_reg );
9206 %}
9208 // And Memory with Immediate
9209 instruct andI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9210 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9211 effect(KILL cr);
9213 ins_cost(125);
9214 format %{ "AND $dst,$src" %}
9215 opcode(0x81, 0x4); /* Opcode 81 /4 id */
9216 // ins_encode( MemImm( dst, src) );
9217 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9218 ins_pipe( ialu_mem_imm );
9219 %}
9221 // Or Instructions
9222 // Or Register with Register
9223 instruct orI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9224 match(Set dst (OrI dst src));
9225 effect(KILL cr);
9227 size(2);
9228 format %{ "OR $dst,$src" %}
9229 opcode(0x0B);
9230 ins_encode( OpcP, RegReg( dst, src) );
9231 ins_pipe( ialu_reg_reg );
9232 %}
9234 instruct orI_eReg_castP2X(eRegI dst, eRegP src, eFlagsReg cr) %{
9235 match(Set dst (OrI dst (CastP2X src)));
9236 effect(KILL cr);
9238 size(2);
9239 format %{ "OR $dst,$src" %}
9240 opcode(0x0B);
9241 ins_encode( OpcP, RegReg( dst, src) );
9242 ins_pipe( ialu_reg_reg );
9243 %}
9246 // Or Register with Immediate
9247 instruct orI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9248 match(Set dst (OrI dst src));
9249 effect(KILL cr);
9251 format %{ "OR $dst,$src" %}
9252 opcode(0x81,0x01); /* Opcode 81 /1 id */
9253 // ins_encode( RegImm( dst, src) );
9254 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9255 ins_pipe( ialu_reg );
9256 %}
9258 // Or Register with Memory
9259 instruct orI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9260 match(Set dst (OrI dst (LoadI src)));
9261 effect(KILL cr);
9263 ins_cost(125);
9264 format %{ "OR $dst,$src" %}
9265 opcode(0x0B);
9266 ins_encode( OpcP, RegMem( dst, src) );
9267 ins_pipe( ialu_reg_mem );
9268 %}
9270 // Or Memory with Register
9271 instruct orI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9272 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9273 effect(KILL cr);
9275 ins_cost(150);
9276 format %{ "OR $dst,$src" %}
9277 opcode(0x09); /* Opcode 09 /r */
9278 ins_encode( OpcP, RegMem( src, dst ) );
9279 ins_pipe( ialu_mem_reg );
9280 %}
9282 // Or Memory with Immediate
9283 instruct orI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9284 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9285 effect(KILL cr);
9287 ins_cost(125);
9288 format %{ "OR $dst,$src" %}
9289 opcode(0x81,0x1); /* Opcode 81 /1 id */
9290 // ins_encode( MemImm( dst, src) );
9291 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9292 ins_pipe( ialu_mem_imm );
9293 %}
9295 // ROL/ROR
9296 // ROL expand
9297 instruct rolI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9298 effect(USE_DEF dst, USE shift, KILL cr);
9300 format %{ "ROL $dst, $shift" %}
9301 opcode(0xD1, 0x0); /* Opcode D1 /0 */
9302 ins_encode( OpcP, RegOpc( dst ));
9303 ins_pipe( ialu_reg );
9304 %}
9306 instruct rolI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9307 effect(USE_DEF dst, USE shift, KILL cr);
9309 format %{ "ROL $dst, $shift" %}
9310 opcode(0xC1, 0x0); /*Opcode /C1 /0 */
9311 ins_encode( RegOpcImm(dst, shift) );
9312 ins_pipe(ialu_reg);
9313 %}
9315 instruct rolI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr) %{
9316 effect(USE_DEF dst, USE shift, KILL cr);
9318 format %{ "ROL $dst, $shift" %}
9319 opcode(0xD3, 0x0); /* Opcode D3 /0 */
9320 ins_encode(OpcP, RegOpc(dst));
9321 ins_pipe( ialu_reg_reg );
9322 %}
9323 // end of ROL expand
9325 // ROL 32bit by one once
9326 instruct rolI_eReg_i1(eRegI dst, immI1 lshift, immI_M1 rshift, eFlagsReg cr) %{
9327 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9329 expand %{
9330 rolI_eReg_imm1(dst, lshift, cr);
9331 %}
9332 %}
9334 // ROL 32bit var by imm8 once
9335 instruct rolI_eReg_i8(eRegI dst, immI8 lshift, immI8 rshift, eFlagsReg cr) %{
9336 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9337 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9339 expand %{
9340 rolI_eReg_imm8(dst, lshift, cr);
9341 %}
9342 %}
9344 // ROL 32bit var by var once
9345 instruct rolI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9346 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI zero shift))));
9348 expand %{
9349 rolI_eReg_CL(dst, shift, cr);
9350 %}
9351 %}
9353 // ROL 32bit var by var once
9354 instruct rolI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9355 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI c32 shift))));
9357 expand %{
9358 rolI_eReg_CL(dst, shift, cr);
9359 %}
9360 %}
9362 // ROR expand
9363 instruct rorI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9364 effect(USE_DEF dst, USE shift, KILL cr);
9366 format %{ "ROR $dst, $shift" %}
9367 opcode(0xD1,0x1); /* Opcode D1 /1 */
9368 ins_encode( OpcP, RegOpc( dst ) );
9369 ins_pipe( ialu_reg );
9370 %}
9372 instruct rorI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9373 effect (USE_DEF dst, USE shift, KILL cr);
9375 format %{ "ROR $dst, $shift" %}
9376 opcode(0xC1, 0x1); /* Opcode /C1 /1 ib */
9377 ins_encode( RegOpcImm(dst, shift) );
9378 ins_pipe( ialu_reg );
9379 %}
9381 instruct rorI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr)%{
9382 effect(USE_DEF dst, USE shift, KILL cr);
9384 format %{ "ROR $dst, $shift" %}
9385 opcode(0xD3, 0x1); /* Opcode D3 /1 */
9386 ins_encode(OpcP, RegOpc(dst));
9387 ins_pipe( ialu_reg_reg );
9388 %}
9389 // end of ROR expand
9391 // ROR right once
9392 instruct rorI_eReg_i1(eRegI dst, immI1 rshift, immI_M1 lshift, eFlagsReg cr) %{
9393 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9395 expand %{
9396 rorI_eReg_imm1(dst, rshift, cr);
9397 %}
9398 %}
9400 // ROR 32bit by immI8 once
9401 instruct rorI_eReg_i8(eRegI dst, immI8 rshift, immI8 lshift, eFlagsReg cr) %{
9402 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9403 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9405 expand %{
9406 rorI_eReg_imm8(dst, rshift, cr);
9407 %}
9408 %}
9410 // ROR 32bit var by var once
9411 instruct rorI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9412 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI zero shift))));
9414 expand %{
9415 rorI_eReg_CL(dst, shift, cr);
9416 %}
9417 %}
9419 // ROR 32bit var by var once
9420 instruct rorI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9421 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI c32 shift))));
9423 expand %{
9424 rorI_eReg_CL(dst, shift, cr);
9425 %}
9426 %}
9428 // Xor Instructions
9429 // Xor Register with Register
9430 instruct xorI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9431 match(Set dst (XorI dst src));
9432 effect(KILL cr);
9434 size(2);
9435 format %{ "XOR $dst,$src" %}
9436 opcode(0x33);
9437 ins_encode( OpcP, RegReg( dst, src) );
9438 ins_pipe( ialu_reg_reg );
9439 %}
9441 // Xor Register with Immediate -1
9442 instruct xorI_eReg_im1(eRegI dst, immI_M1 imm) %{
9443 match(Set dst (XorI dst imm));
9445 size(2);
9446 format %{ "NOT $dst" %}
9447 ins_encode %{
9448 __ notl($dst$$Register);
9449 %}
9450 ins_pipe( ialu_reg );
9451 %}
9453 // Xor Register with Immediate
9454 instruct xorI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9455 match(Set dst (XorI dst src));
9456 effect(KILL cr);
9458 format %{ "XOR $dst,$src" %}
9459 opcode(0x81,0x06); /* Opcode 81 /6 id */
9460 // ins_encode( RegImm( dst, src) );
9461 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9462 ins_pipe( ialu_reg );
9463 %}
9465 // Xor Register with Memory
9466 instruct xorI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9467 match(Set dst (XorI dst (LoadI src)));
9468 effect(KILL cr);
9470 ins_cost(125);
9471 format %{ "XOR $dst,$src" %}
9472 opcode(0x33);
9473 ins_encode( OpcP, RegMem(dst, src) );
9474 ins_pipe( ialu_reg_mem );
9475 %}
9477 // Xor Memory with Register
9478 instruct xorI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9479 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9480 effect(KILL cr);
9482 ins_cost(150);
9483 format %{ "XOR $dst,$src" %}
9484 opcode(0x31); /* Opcode 31 /r */
9485 ins_encode( OpcP, RegMem( src, dst ) );
9486 ins_pipe( ialu_mem_reg );
9487 %}
9489 // Xor Memory with Immediate
9490 instruct xorI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9491 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9492 effect(KILL cr);
9494 ins_cost(125);
9495 format %{ "XOR $dst,$src" %}
9496 opcode(0x81,0x6); /* Opcode 81 /6 id */
9497 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9498 ins_pipe( ialu_mem_imm );
9499 %}
9501 //----------Convert Int to Boolean---------------------------------------------
9503 instruct movI_nocopy(eRegI dst, eRegI src) %{
9504 effect( DEF dst, USE src );
9505 format %{ "MOV $dst,$src" %}
9506 ins_encode( enc_Copy( dst, src) );
9507 ins_pipe( ialu_reg_reg );
9508 %}
9510 instruct ci2b( eRegI dst, eRegI src, eFlagsReg cr ) %{
9511 effect( USE_DEF dst, USE src, KILL cr );
9513 size(4);
9514 format %{ "NEG $dst\n\t"
9515 "ADC $dst,$src" %}
9516 ins_encode( neg_reg(dst),
9517 OpcRegReg(0x13,dst,src) );
9518 ins_pipe( ialu_reg_reg_long );
9519 %}
9521 instruct convI2B( eRegI dst, eRegI src, eFlagsReg cr ) %{
9522 match(Set dst (Conv2B src));
9524 expand %{
9525 movI_nocopy(dst,src);
9526 ci2b(dst,src,cr);
9527 %}
9528 %}
9530 instruct movP_nocopy(eRegI dst, eRegP src) %{
9531 effect( DEF dst, USE src );
9532 format %{ "MOV $dst,$src" %}
9533 ins_encode( enc_Copy( dst, src) );
9534 ins_pipe( ialu_reg_reg );
9535 %}
9537 instruct cp2b( eRegI dst, eRegP src, eFlagsReg cr ) %{
9538 effect( USE_DEF dst, USE src, KILL cr );
9539 format %{ "NEG $dst\n\t"
9540 "ADC $dst,$src" %}
9541 ins_encode( neg_reg(dst),
9542 OpcRegReg(0x13,dst,src) );
9543 ins_pipe( ialu_reg_reg_long );
9544 %}
9546 instruct convP2B( eRegI dst, eRegP src, eFlagsReg cr ) %{
9547 match(Set dst (Conv2B src));
9549 expand %{
9550 movP_nocopy(dst,src);
9551 cp2b(dst,src,cr);
9552 %}
9553 %}
9555 instruct cmpLTMask( eCXRegI dst, ncxRegI p, ncxRegI q, eFlagsReg cr ) %{
9556 match(Set dst (CmpLTMask p q));
9557 effect( KILL cr );
9558 ins_cost(400);
9560 // SETlt can only use low byte of EAX,EBX, ECX, or EDX as destination
9561 format %{ "XOR $dst,$dst\n\t"
9562 "CMP $p,$q\n\t"
9563 "SETlt $dst\n\t"
9564 "NEG $dst" %}
9565 ins_encode( OpcRegReg(0x33,dst,dst),
9566 OpcRegReg(0x3B,p,q),
9567 setLT_reg(dst), neg_reg(dst) );
9568 ins_pipe( pipe_slow );
9569 %}
9571 instruct cmpLTMask0( eRegI dst, immI0 zero, eFlagsReg cr ) %{
9572 match(Set dst (CmpLTMask dst zero));
9573 effect( DEF dst, KILL cr );
9574 ins_cost(100);
9576 format %{ "SAR $dst,31" %}
9577 opcode(0xC1, 0x7); /* C1 /7 ib */
9578 ins_encode( RegOpcImm( dst, 0x1F ) );
9579 ins_pipe( ialu_reg );
9580 %}
9583 instruct cadd_cmpLTMask( ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp, eFlagsReg cr ) %{
9584 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q)));
9585 effect( KILL tmp, KILL cr );
9586 ins_cost(400);
9587 // annoyingly, $tmp has no edges so you cant ask for it in
9588 // any format or encoding
9589 format %{ "SUB $p,$q\n\t"
9590 "SBB ECX,ECX\n\t"
9591 "AND ECX,$y\n\t"
9592 "ADD $p,ECX" %}
9593 ins_encode( enc_cmpLTP(p,q,y,tmp) );
9594 ins_pipe( pipe_cmplt );
9595 %}
9597 /* If I enable this, I encourage spilling in the inner loop of compress.
9598 instruct cadd_cmpLTMask_mem( ncxRegI p, ncxRegI q, memory y, eCXRegI tmp, eFlagsReg cr ) %{
9599 match(Set p (AddI (AndI (CmpLTMask p q) (LoadI y)) (SubI p q)));
9600 effect( USE_KILL tmp, KILL cr );
9601 ins_cost(400);
9603 format %{ "SUB $p,$q\n\t"
9604 "SBB ECX,ECX\n\t"
9605 "AND ECX,$y\n\t"
9606 "ADD $p,ECX" %}
9607 ins_encode( enc_cmpLTP_mem(p,q,y,tmp) );
9608 %}
9609 */
9611 //----------Long Instructions------------------------------------------------
9612 // Add Long Register with Register
9613 instruct addL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9614 match(Set dst (AddL dst src));
9615 effect(KILL cr);
9616 ins_cost(200);
9617 format %{ "ADD $dst.lo,$src.lo\n\t"
9618 "ADC $dst.hi,$src.hi" %}
9619 opcode(0x03, 0x13);
9620 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9621 ins_pipe( ialu_reg_reg_long );
9622 %}
9624 // Add Long Register with Immediate
9625 instruct addL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9626 match(Set dst (AddL dst src));
9627 effect(KILL cr);
9628 format %{ "ADD $dst.lo,$src.lo\n\t"
9629 "ADC $dst.hi,$src.hi" %}
9630 opcode(0x81,0x00,0x02); /* Opcode 81 /0, 81 /2 */
9631 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9632 ins_pipe( ialu_reg_long );
9633 %}
9635 // Add Long Register with Memory
9636 instruct addL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9637 match(Set dst (AddL dst (LoadL mem)));
9638 effect(KILL cr);
9639 ins_cost(125);
9640 format %{ "ADD $dst.lo,$mem\n\t"
9641 "ADC $dst.hi,$mem+4" %}
9642 opcode(0x03, 0x13);
9643 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9644 ins_pipe( ialu_reg_long_mem );
9645 %}
9647 // Subtract Long Register with Register.
9648 instruct subL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9649 match(Set dst (SubL dst src));
9650 effect(KILL cr);
9651 ins_cost(200);
9652 format %{ "SUB $dst.lo,$src.lo\n\t"
9653 "SBB $dst.hi,$src.hi" %}
9654 opcode(0x2B, 0x1B);
9655 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9656 ins_pipe( ialu_reg_reg_long );
9657 %}
9659 // Subtract Long Register with Immediate
9660 instruct subL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9661 match(Set dst (SubL dst src));
9662 effect(KILL cr);
9663 format %{ "SUB $dst.lo,$src.lo\n\t"
9664 "SBB $dst.hi,$src.hi" %}
9665 opcode(0x81,0x05,0x03); /* Opcode 81 /5, 81 /3 */
9666 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9667 ins_pipe( ialu_reg_long );
9668 %}
9670 // Subtract Long Register with Memory
9671 instruct subL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9672 match(Set dst (SubL dst (LoadL mem)));
9673 effect(KILL cr);
9674 ins_cost(125);
9675 format %{ "SUB $dst.lo,$mem\n\t"
9676 "SBB $dst.hi,$mem+4" %}
9677 opcode(0x2B, 0x1B);
9678 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9679 ins_pipe( ialu_reg_long_mem );
9680 %}
9682 instruct negL_eReg(eRegL dst, immL0 zero, eFlagsReg cr) %{
9683 match(Set dst (SubL zero dst));
9684 effect(KILL cr);
9685 ins_cost(300);
9686 format %{ "NEG $dst.hi\n\tNEG $dst.lo\n\tSBB $dst.hi,0" %}
9687 ins_encode( neg_long(dst) );
9688 ins_pipe( ialu_reg_reg_long );
9689 %}
9691 // And Long Register with Register
9692 instruct andL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9693 match(Set dst (AndL dst src));
9694 effect(KILL cr);
9695 format %{ "AND $dst.lo,$src.lo\n\t"
9696 "AND $dst.hi,$src.hi" %}
9697 opcode(0x23,0x23);
9698 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9699 ins_pipe( ialu_reg_reg_long );
9700 %}
9702 // And Long Register with Immediate
9703 instruct andL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9704 match(Set dst (AndL dst src));
9705 effect(KILL cr);
9706 format %{ "AND $dst.lo,$src.lo\n\t"
9707 "AND $dst.hi,$src.hi" %}
9708 opcode(0x81,0x04,0x04); /* Opcode 81 /4, 81 /4 */
9709 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9710 ins_pipe( ialu_reg_long );
9711 %}
9713 // And Long Register with Memory
9714 instruct andL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9715 match(Set dst (AndL dst (LoadL mem)));
9716 effect(KILL cr);
9717 ins_cost(125);
9718 format %{ "AND $dst.lo,$mem\n\t"
9719 "AND $dst.hi,$mem+4" %}
9720 opcode(0x23, 0x23);
9721 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9722 ins_pipe( ialu_reg_long_mem );
9723 %}
9725 // Or Long Register with Register
9726 instruct orl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9727 match(Set dst (OrL dst src));
9728 effect(KILL cr);
9729 format %{ "OR $dst.lo,$src.lo\n\t"
9730 "OR $dst.hi,$src.hi" %}
9731 opcode(0x0B,0x0B);
9732 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9733 ins_pipe( ialu_reg_reg_long );
9734 %}
9736 // Or Long Register with Immediate
9737 instruct orl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9738 match(Set dst (OrL dst src));
9739 effect(KILL cr);
9740 format %{ "OR $dst.lo,$src.lo\n\t"
9741 "OR $dst.hi,$src.hi" %}
9742 opcode(0x81,0x01,0x01); /* Opcode 81 /1, 81 /1 */
9743 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9744 ins_pipe( ialu_reg_long );
9745 %}
9747 // Or Long Register with Memory
9748 instruct orl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9749 match(Set dst (OrL dst (LoadL mem)));
9750 effect(KILL cr);
9751 ins_cost(125);
9752 format %{ "OR $dst.lo,$mem\n\t"
9753 "OR $dst.hi,$mem+4" %}
9754 opcode(0x0B,0x0B);
9755 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9756 ins_pipe( ialu_reg_long_mem );
9757 %}
9759 // Xor Long Register with Register
9760 instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9761 match(Set dst (XorL dst src));
9762 effect(KILL cr);
9763 format %{ "XOR $dst.lo,$src.lo\n\t"
9764 "XOR $dst.hi,$src.hi" %}
9765 opcode(0x33,0x33);
9766 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9767 ins_pipe( ialu_reg_reg_long );
9768 %}
9770 // Xor Long Register with Immediate -1
9771 instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
9772 match(Set dst (XorL dst imm));
9773 format %{ "NOT $dst.lo\n\t"
9774 "NOT $dst.hi" %}
9775 ins_encode %{
9776 __ notl($dst$$Register);
9777 __ notl(HIGH_FROM_LOW($dst$$Register));
9778 %}
9779 ins_pipe( ialu_reg_long );
9780 %}
9782 // Xor Long Register with Immediate
9783 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9784 match(Set dst (XorL dst src));
9785 effect(KILL cr);
9786 format %{ "XOR $dst.lo,$src.lo\n\t"
9787 "XOR $dst.hi,$src.hi" %}
9788 opcode(0x81,0x06,0x06); /* Opcode 81 /6, 81 /6 */
9789 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9790 ins_pipe( ialu_reg_long );
9791 %}
9793 // Xor Long Register with Memory
9794 instruct xorl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9795 match(Set dst (XorL dst (LoadL mem)));
9796 effect(KILL cr);
9797 ins_cost(125);
9798 format %{ "XOR $dst.lo,$mem\n\t"
9799 "XOR $dst.hi,$mem+4" %}
9800 opcode(0x33,0x33);
9801 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9802 ins_pipe( ialu_reg_long_mem );
9803 %}
9805 // Shift Left Long by 1
9806 instruct shlL_eReg_1(eRegL dst, immI_1 cnt, eFlagsReg cr) %{
9807 predicate(UseNewLongLShift);
9808 match(Set dst (LShiftL dst cnt));
9809 effect(KILL cr);
9810 ins_cost(100);
9811 format %{ "ADD $dst.lo,$dst.lo\n\t"
9812 "ADC $dst.hi,$dst.hi" %}
9813 ins_encode %{
9814 __ addl($dst$$Register,$dst$$Register);
9815 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9816 %}
9817 ins_pipe( ialu_reg_long );
9818 %}
9820 // Shift Left Long by 2
9821 instruct shlL_eReg_2(eRegL dst, immI_2 cnt, eFlagsReg cr) %{
9822 predicate(UseNewLongLShift);
9823 match(Set dst (LShiftL dst cnt));
9824 effect(KILL cr);
9825 ins_cost(100);
9826 format %{ "ADD $dst.lo,$dst.lo\n\t"
9827 "ADC $dst.hi,$dst.hi\n\t"
9828 "ADD $dst.lo,$dst.lo\n\t"
9829 "ADC $dst.hi,$dst.hi" %}
9830 ins_encode %{
9831 __ addl($dst$$Register,$dst$$Register);
9832 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9833 __ addl($dst$$Register,$dst$$Register);
9834 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9835 %}
9836 ins_pipe( ialu_reg_long );
9837 %}
9839 // Shift Left Long by 3
9840 instruct shlL_eReg_3(eRegL dst, immI_3 cnt, eFlagsReg cr) %{
9841 predicate(UseNewLongLShift);
9842 match(Set dst (LShiftL dst cnt));
9843 effect(KILL cr);
9844 ins_cost(100);
9845 format %{ "ADD $dst.lo,$dst.lo\n\t"
9846 "ADC $dst.hi,$dst.hi\n\t"
9847 "ADD $dst.lo,$dst.lo\n\t"
9848 "ADC $dst.hi,$dst.hi\n\t"
9849 "ADD $dst.lo,$dst.lo\n\t"
9850 "ADC $dst.hi,$dst.hi" %}
9851 ins_encode %{
9852 __ addl($dst$$Register,$dst$$Register);
9853 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9854 __ addl($dst$$Register,$dst$$Register);
9855 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9856 __ addl($dst$$Register,$dst$$Register);
9857 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9858 %}
9859 ins_pipe( ialu_reg_long );
9860 %}
9862 // Shift Left Long by 1-31
9863 instruct shlL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9864 match(Set dst (LShiftL dst cnt));
9865 effect(KILL cr);
9866 ins_cost(200);
9867 format %{ "SHLD $dst.hi,$dst.lo,$cnt\n\t"
9868 "SHL $dst.lo,$cnt" %}
9869 opcode(0xC1, 0x4, 0xA4); /* 0F/A4, then C1 /4 ib */
9870 ins_encode( move_long_small_shift(dst,cnt) );
9871 ins_pipe( ialu_reg_long );
9872 %}
9874 // Shift Left Long by 32-63
9875 instruct shlL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9876 match(Set dst (LShiftL dst cnt));
9877 effect(KILL cr);
9878 ins_cost(300);
9879 format %{ "MOV $dst.hi,$dst.lo\n"
9880 "\tSHL $dst.hi,$cnt-32\n"
9881 "\tXOR $dst.lo,$dst.lo" %}
9882 opcode(0xC1, 0x4); /* C1 /4 ib */
9883 ins_encode( move_long_big_shift_clr(dst,cnt) );
9884 ins_pipe( ialu_reg_long );
9885 %}
9887 // Shift Left Long by variable
9888 instruct salL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9889 match(Set dst (LShiftL dst shift));
9890 effect(KILL cr);
9891 ins_cost(500+200);
9892 size(17);
9893 format %{ "TEST $shift,32\n\t"
9894 "JEQ,s small\n\t"
9895 "MOV $dst.hi,$dst.lo\n\t"
9896 "XOR $dst.lo,$dst.lo\n"
9897 "small:\tSHLD $dst.hi,$dst.lo,$shift\n\t"
9898 "SHL $dst.lo,$shift" %}
9899 ins_encode( shift_left_long( dst, shift ) );
9900 ins_pipe( pipe_slow );
9901 %}
9903 // Shift Right Long by 1-31
9904 instruct shrL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9905 match(Set dst (URShiftL dst cnt));
9906 effect(KILL cr);
9907 ins_cost(200);
9908 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9909 "SHR $dst.hi,$cnt" %}
9910 opcode(0xC1, 0x5, 0xAC); /* 0F/AC, then C1 /5 ib */
9911 ins_encode( move_long_small_shift(dst,cnt) );
9912 ins_pipe( ialu_reg_long );
9913 %}
9915 // Shift Right Long by 32-63
9916 instruct shrL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9917 match(Set dst (URShiftL dst cnt));
9918 effect(KILL cr);
9919 ins_cost(300);
9920 format %{ "MOV $dst.lo,$dst.hi\n"
9921 "\tSHR $dst.lo,$cnt-32\n"
9922 "\tXOR $dst.hi,$dst.hi" %}
9923 opcode(0xC1, 0x5); /* C1 /5 ib */
9924 ins_encode( move_long_big_shift_clr(dst,cnt) );
9925 ins_pipe( ialu_reg_long );
9926 %}
9928 // Shift Right Long by variable
9929 instruct shrL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9930 match(Set dst (URShiftL dst shift));
9931 effect(KILL cr);
9932 ins_cost(600);
9933 size(17);
9934 format %{ "TEST $shift,32\n\t"
9935 "JEQ,s small\n\t"
9936 "MOV $dst.lo,$dst.hi\n\t"
9937 "XOR $dst.hi,$dst.hi\n"
9938 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9939 "SHR $dst.hi,$shift" %}
9940 ins_encode( shift_right_long( dst, shift ) );
9941 ins_pipe( pipe_slow );
9942 %}
9944 // Shift Right Long by 1-31
9945 instruct sarL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9946 match(Set dst (RShiftL dst cnt));
9947 effect(KILL cr);
9948 ins_cost(200);
9949 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9950 "SAR $dst.hi,$cnt" %}
9951 opcode(0xC1, 0x7, 0xAC); /* 0F/AC, then C1 /7 ib */
9952 ins_encode( move_long_small_shift(dst,cnt) );
9953 ins_pipe( ialu_reg_long );
9954 %}
9956 // Shift Right Long by 32-63
9957 instruct sarL_eReg_32_63( eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9958 match(Set dst (RShiftL dst cnt));
9959 effect(KILL cr);
9960 ins_cost(300);
9961 format %{ "MOV $dst.lo,$dst.hi\n"
9962 "\tSAR $dst.lo,$cnt-32\n"
9963 "\tSAR $dst.hi,31" %}
9964 opcode(0xC1, 0x7); /* C1 /7 ib */
9965 ins_encode( move_long_big_shift_sign(dst,cnt) );
9966 ins_pipe( ialu_reg_long );
9967 %}
9969 // Shift Right arithmetic Long by variable
9970 instruct sarL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9971 match(Set dst (RShiftL dst shift));
9972 effect(KILL cr);
9973 ins_cost(600);
9974 size(18);
9975 format %{ "TEST $shift,32\n\t"
9976 "JEQ,s small\n\t"
9977 "MOV $dst.lo,$dst.hi\n\t"
9978 "SAR $dst.hi,31\n"
9979 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9980 "SAR $dst.hi,$shift" %}
9981 ins_encode( shift_right_arith_long( dst, shift ) );
9982 ins_pipe( pipe_slow );
9983 %}
9986 //----------Double Instructions------------------------------------------------
9987 // Double Math
9989 // Compare & branch
9991 // P6 version of float compare, sets condition codes in EFLAGS
9992 instruct cmpD_cc_P6(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
9993 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9994 match(Set cr (CmpD src1 src2));
9995 effect(KILL rax);
9996 ins_cost(150);
9997 format %{ "FLD $src1\n\t"
9998 "FUCOMIP ST,$src2 // P6 instruction\n\t"
9999 "JNP exit\n\t"
10000 "MOV ah,1 // saw a NaN, set CF\n\t"
10001 "SAHF\n"
10002 "exit:\tNOP // avoid branch to branch" %}
10003 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10004 ins_encode( Push_Reg_D(src1),
10005 OpcP, RegOpc(src2),
10006 cmpF_P6_fixup );
10007 ins_pipe( pipe_slow );
10008 %}
10010 instruct cmpD_cc_P6CF(eFlagsRegUCF cr, regD src1, regD src2) %{
10011 predicate(VM_Version::supports_cmov() && UseSSE <=1);
10012 match(Set cr (CmpD src1 src2));
10013 ins_cost(150);
10014 format %{ "FLD $src1\n\t"
10015 "FUCOMIP ST,$src2 // P6 instruction" %}
10016 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10017 ins_encode( Push_Reg_D(src1),
10018 OpcP, RegOpc(src2));
10019 ins_pipe( pipe_slow );
10020 %}
10022 // Compare & branch
10023 instruct cmpD_cc(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
10024 predicate(UseSSE<=1);
10025 match(Set cr (CmpD src1 src2));
10026 effect(KILL rax);
10027 ins_cost(200);
10028 format %{ "FLD $src1\n\t"
10029 "FCOMp $src2\n\t"
10030 "FNSTSW AX\n\t"
10031 "TEST AX,0x400\n\t"
10032 "JZ,s flags\n\t"
10033 "MOV AH,1\t# unordered treat as LT\n"
10034 "flags:\tSAHF" %}
10035 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10036 ins_encode( Push_Reg_D(src1),
10037 OpcP, RegOpc(src2),
10038 fpu_flags);
10039 ins_pipe( pipe_slow );
10040 %}
10042 // Compare vs zero into -1,0,1
10043 instruct cmpD_0(eRegI dst, regD src1, immD0 zero, eAXRegI rax, eFlagsReg cr) %{
10044 predicate(UseSSE<=1);
10045 match(Set dst (CmpD3 src1 zero));
10046 effect(KILL cr, KILL rax);
10047 ins_cost(280);
10048 format %{ "FTSTD $dst,$src1" %}
10049 opcode(0xE4, 0xD9);
10050 ins_encode( Push_Reg_D(src1),
10051 OpcS, OpcP, PopFPU,
10052 CmpF_Result(dst));
10053 ins_pipe( pipe_slow );
10054 %}
10056 // Compare into -1,0,1
10057 instruct cmpD_reg(eRegI dst, regD src1, regD src2, eAXRegI rax, eFlagsReg cr) %{
10058 predicate(UseSSE<=1);
10059 match(Set dst (CmpD3 src1 src2));
10060 effect(KILL cr, KILL rax);
10061 ins_cost(300);
10062 format %{ "FCMPD $dst,$src1,$src2" %}
10063 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10064 ins_encode( Push_Reg_D(src1),
10065 OpcP, RegOpc(src2),
10066 CmpF_Result(dst));
10067 ins_pipe( pipe_slow );
10068 %}
10070 // float compare and set condition codes in EFLAGS by XMM regs
10071 instruct cmpXD_cc(eFlagsRegU cr, regXD dst, regXD src, eAXRegI rax) %{
10072 predicate(UseSSE>=2);
10073 match(Set cr (CmpD dst src));
10074 effect(KILL rax);
10075 ins_cost(125);
10076 format %{ "COMISD $dst,$src\n"
10077 "\tJNP exit\n"
10078 "\tMOV ah,1 // saw a NaN, set CF\n"
10079 "\tSAHF\n"
10080 "exit:\tNOP // avoid branch to branch" %}
10081 opcode(0x66, 0x0F, 0x2F);
10082 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src), cmpF_P6_fixup);
10083 ins_pipe( pipe_slow );
10084 %}
10086 instruct cmpXD_ccCF(eFlagsRegUCF cr, regXD dst, regXD src) %{
10087 predicate(UseSSE>=2);
10088 match(Set cr (CmpD dst src));
10089 ins_cost(100);
10090 format %{ "COMISD $dst,$src" %}
10091 opcode(0x66, 0x0F, 0x2F);
10092 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
10093 ins_pipe( pipe_slow );
10094 %}
10096 // float compare and set condition codes in EFLAGS by XMM regs
10097 instruct cmpXD_ccmem(eFlagsRegU cr, regXD dst, memory src, eAXRegI rax) %{
10098 predicate(UseSSE>=2);
10099 match(Set cr (CmpD dst (LoadD src)));
10100 effect(KILL rax);
10101 ins_cost(145);
10102 format %{ "COMISD $dst,$src\n"
10103 "\tJNP exit\n"
10104 "\tMOV ah,1 // saw a NaN, set CF\n"
10105 "\tSAHF\n"
10106 "exit:\tNOP // avoid branch to branch" %}
10107 opcode(0x66, 0x0F, 0x2F);
10108 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src), cmpF_P6_fixup);
10109 ins_pipe( pipe_slow );
10110 %}
10112 instruct cmpXD_ccmemCF(eFlagsRegUCF cr, regXD dst, memory src) %{
10113 predicate(UseSSE>=2);
10114 match(Set cr (CmpD dst (LoadD src)));
10115 ins_cost(100);
10116 format %{ "COMISD $dst,$src" %}
10117 opcode(0x66, 0x0F, 0x2F);
10118 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src));
10119 ins_pipe( pipe_slow );
10120 %}
10122 // Compare into -1,0,1 in XMM
10123 instruct cmpXD_reg(eRegI dst, regXD src1, regXD src2, eFlagsReg cr) %{
10124 predicate(UseSSE>=2);
10125 match(Set dst (CmpD3 src1 src2));
10126 effect(KILL cr);
10127 ins_cost(255);
10128 format %{ "XOR $dst,$dst\n"
10129 "\tCOMISD $src1,$src2\n"
10130 "\tJP,s nan\n"
10131 "\tJEQ,s exit\n"
10132 "\tJA,s inc\n"
10133 "nan:\tDEC $dst\n"
10134 "\tJMP,s exit\n"
10135 "inc:\tINC $dst\n"
10136 "exit:"
10137 %}
10138 opcode(0x66, 0x0F, 0x2F);
10139 ins_encode(Xor_Reg(dst), OpcP, OpcS, Opcode(tertiary), RegReg(src1, src2),
10140 CmpX_Result(dst));
10141 ins_pipe( pipe_slow );
10142 %}
10144 // Compare into -1,0,1 in XMM and memory
10145 instruct cmpXD_regmem(eRegI dst, regXD src1, memory mem, eFlagsReg cr) %{
10146 predicate(UseSSE>=2);
10147 match(Set dst (CmpD3 src1 (LoadD mem)));
10148 effect(KILL cr);
10149 ins_cost(275);
10150 format %{ "COMISD $src1,$mem\n"
10151 "\tMOV $dst,0\t\t# do not blow flags\n"
10152 "\tJP,s nan\n"
10153 "\tJEQ,s exit\n"
10154 "\tJA,s inc\n"
10155 "nan:\tDEC $dst\n"
10156 "\tJMP,s exit\n"
10157 "inc:\tINC $dst\n"
10158 "exit:"
10159 %}
10160 opcode(0x66, 0x0F, 0x2F);
10161 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(src1, mem),
10162 LdImmI(dst,0x0), CmpX_Result(dst));
10163 ins_pipe( pipe_slow );
10164 %}
10167 instruct subD_reg(regD dst, regD src) %{
10168 predicate (UseSSE <=1);
10169 match(Set dst (SubD dst src));
10171 format %{ "FLD $src\n\t"
10172 "DSUBp $dst,ST" %}
10173 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
10174 ins_cost(150);
10175 ins_encode( Push_Reg_D(src),
10176 OpcP, RegOpc(dst) );
10177 ins_pipe( fpu_reg_reg );
10178 %}
10180 instruct subD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10181 predicate (UseSSE <=1);
10182 match(Set dst (RoundDouble (SubD src1 src2)));
10183 ins_cost(250);
10185 format %{ "FLD $src2\n\t"
10186 "DSUB ST,$src1\n\t"
10187 "FSTP_D $dst\t# D-round" %}
10188 opcode(0xD8, 0x5);
10189 ins_encode( Push_Reg_D(src2),
10190 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10191 ins_pipe( fpu_mem_reg_reg );
10192 %}
10195 instruct subD_reg_mem(regD dst, memory src) %{
10196 predicate (UseSSE <=1);
10197 match(Set dst (SubD dst (LoadD src)));
10198 ins_cost(150);
10200 format %{ "FLD $src\n\t"
10201 "DSUBp $dst,ST" %}
10202 opcode(0xDE, 0x5, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10203 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10204 OpcP, RegOpc(dst) );
10205 ins_pipe( fpu_reg_mem );
10206 %}
10208 instruct absD_reg(regDPR1 dst, regDPR1 src) %{
10209 predicate (UseSSE<=1);
10210 match(Set dst (AbsD src));
10211 ins_cost(100);
10212 format %{ "FABS" %}
10213 opcode(0xE1, 0xD9);
10214 ins_encode( OpcS, OpcP );
10215 ins_pipe( fpu_reg_reg );
10216 %}
10218 instruct absXD_reg( regXD dst ) %{
10219 predicate(UseSSE>=2);
10220 match(Set dst (AbsD dst));
10221 format %{ "ANDPD $dst,[0x7FFFFFFFFFFFFFFF]\t# ABS D by sign masking" %}
10222 ins_encode( AbsXD_encoding(dst));
10223 ins_pipe( pipe_slow );
10224 %}
10226 instruct negD_reg(regDPR1 dst, regDPR1 src) %{
10227 predicate(UseSSE<=1);
10228 match(Set dst (NegD src));
10229 ins_cost(100);
10230 format %{ "FCHS" %}
10231 opcode(0xE0, 0xD9);
10232 ins_encode( OpcS, OpcP );
10233 ins_pipe( fpu_reg_reg );
10234 %}
10236 instruct negXD_reg( regXD dst ) %{
10237 predicate(UseSSE>=2);
10238 match(Set dst (NegD dst));
10239 format %{ "XORPD $dst,[0x8000000000000000]\t# CHS D by sign flipping" %}
10240 ins_encode %{
10241 __ xorpd($dst$$XMMRegister,
10242 ExternalAddress((address)double_signflip_pool));
10243 %}
10244 ins_pipe( pipe_slow );
10245 %}
10247 instruct addD_reg(regD dst, regD src) %{
10248 predicate(UseSSE<=1);
10249 match(Set dst (AddD dst src));
10250 format %{ "FLD $src\n\t"
10251 "DADD $dst,ST" %}
10252 size(4);
10253 ins_cost(150);
10254 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
10255 ins_encode( Push_Reg_D(src),
10256 OpcP, RegOpc(dst) );
10257 ins_pipe( fpu_reg_reg );
10258 %}
10261 instruct addD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10262 predicate(UseSSE<=1);
10263 match(Set dst (RoundDouble (AddD src1 src2)));
10264 ins_cost(250);
10266 format %{ "FLD $src2\n\t"
10267 "DADD ST,$src1\n\t"
10268 "FSTP_D $dst\t# D-round" %}
10269 opcode(0xD8, 0x0); /* D8 C0+i or D8 /0*/
10270 ins_encode( Push_Reg_D(src2),
10271 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10272 ins_pipe( fpu_mem_reg_reg );
10273 %}
10276 instruct addD_reg_mem(regD dst, memory src) %{
10277 predicate(UseSSE<=1);
10278 match(Set dst (AddD dst (LoadD src)));
10279 ins_cost(150);
10281 format %{ "FLD $src\n\t"
10282 "DADDp $dst,ST" %}
10283 opcode(0xDE, 0x0, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10284 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10285 OpcP, RegOpc(dst) );
10286 ins_pipe( fpu_reg_mem );
10287 %}
10289 // add-to-memory
10290 instruct addD_mem_reg(memory dst, regD src) %{
10291 predicate(UseSSE<=1);
10292 match(Set dst (StoreD dst (RoundDouble (AddD (LoadD dst) src))));
10293 ins_cost(150);
10295 format %{ "FLD_D $dst\n\t"
10296 "DADD ST,$src\n\t"
10297 "FST_D $dst" %}
10298 opcode(0xDD, 0x0);
10299 ins_encode( Opcode(0xDD), RMopc_Mem(0x00,dst),
10300 Opcode(0xD8), RegOpc(src),
10301 set_instruction_start,
10302 Opcode(0xDD), RMopc_Mem(0x03,dst) );
10303 ins_pipe( fpu_reg_mem );
10304 %}
10306 instruct addD_reg_imm1(regD dst, immD1 src) %{
10307 predicate(UseSSE<=1);
10308 match(Set dst (AddD dst src));
10309 ins_cost(125);
10310 format %{ "FLD1\n\t"
10311 "DADDp $dst,ST" %}
10312 opcode(0xDE, 0x00);
10313 ins_encode( LdImmD(src),
10314 OpcP, RegOpc(dst) );
10315 ins_pipe( fpu_reg );
10316 %}
10318 instruct addD_reg_imm(regD dst, immD src) %{
10319 predicate(UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10320 match(Set dst (AddD dst src));
10321 ins_cost(200);
10322 format %{ "FLD_D [$src]\n\t"
10323 "DADDp $dst,ST" %}
10324 opcode(0xDE, 0x00); /* DE /0 */
10325 ins_encode( LdImmD(src),
10326 OpcP, RegOpc(dst));
10327 ins_pipe( fpu_reg_mem );
10328 %}
10330 instruct addD_reg_imm_round(stackSlotD dst, regD src, immD con) %{
10331 predicate(UseSSE<=1 && _kids[0]->_kids[1]->_leaf->getd() != 0.0 && _kids[0]->_kids[1]->_leaf->getd() != 1.0 );
10332 match(Set dst (RoundDouble (AddD src con)));
10333 ins_cost(200);
10334 format %{ "FLD_D [$con]\n\t"
10335 "DADD ST,$src\n\t"
10336 "FSTP_D $dst\t# D-round" %}
10337 opcode(0xD8, 0x00); /* D8 /0 */
10338 ins_encode( LdImmD(con),
10339 OpcP, RegOpc(src), Pop_Mem_D(dst));
10340 ins_pipe( fpu_mem_reg_con );
10341 %}
10343 // Add two double precision floating point values in xmm
10344 instruct addXD_reg(regXD dst, regXD src) %{
10345 predicate(UseSSE>=2);
10346 match(Set dst (AddD dst src));
10347 format %{ "ADDSD $dst,$src" %}
10348 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
10349 ins_pipe( pipe_slow );
10350 %}
10352 instruct addXD_imm(regXD dst, immXD con) %{
10353 predicate(UseSSE>=2);
10354 match(Set dst (AddD dst con));
10355 format %{ "ADDSD $dst,[$con]" %}
10356 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), LdImmXD(dst, con) );
10357 ins_pipe( pipe_slow );
10358 %}
10360 instruct addXD_mem(regXD dst, memory mem) %{
10361 predicate(UseSSE>=2);
10362 match(Set dst (AddD dst (LoadD mem)));
10363 format %{ "ADDSD $dst,$mem" %}
10364 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegMem(dst,mem));
10365 ins_pipe( pipe_slow );
10366 %}
10368 // Sub two double precision floating point values in xmm
10369 instruct subXD_reg(regXD dst, regXD src) %{
10370 predicate(UseSSE>=2);
10371 match(Set dst (SubD dst src));
10372 format %{ "SUBSD $dst,$src" %}
10373 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
10374 ins_pipe( pipe_slow );
10375 %}
10377 instruct subXD_imm(regXD dst, immXD con) %{
10378 predicate(UseSSE>=2);
10379 match(Set dst (SubD dst con));
10380 format %{ "SUBSD $dst,[$con]" %}
10381 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), LdImmXD(dst, con) );
10382 ins_pipe( pipe_slow );
10383 %}
10385 instruct subXD_mem(regXD dst, memory mem) %{
10386 predicate(UseSSE>=2);
10387 match(Set dst (SubD dst (LoadD mem)));
10388 format %{ "SUBSD $dst,$mem" %}
10389 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
10390 ins_pipe( pipe_slow );
10391 %}
10393 // Mul two double precision floating point values in xmm
10394 instruct mulXD_reg(regXD dst, regXD src) %{
10395 predicate(UseSSE>=2);
10396 match(Set dst (MulD dst src));
10397 format %{ "MULSD $dst,$src" %}
10398 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
10399 ins_pipe( pipe_slow );
10400 %}
10402 instruct mulXD_imm(regXD dst, immXD con) %{
10403 predicate(UseSSE>=2);
10404 match(Set dst (MulD dst con));
10405 format %{ "MULSD $dst,[$con]" %}
10406 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), LdImmXD(dst, con) );
10407 ins_pipe( pipe_slow );
10408 %}
10410 instruct mulXD_mem(regXD dst, memory mem) %{
10411 predicate(UseSSE>=2);
10412 match(Set dst (MulD dst (LoadD mem)));
10413 format %{ "MULSD $dst,$mem" %}
10414 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
10415 ins_pipe( pipe_slow );
10416 %}
10418 // Div two double precision floating point values in xmm
10419 instruct divXD_reg(regXD dst, regXD src) %{
10420 predicate(UseSSE>=2);
10421 match(Set dst (DivD dst src));
10422 format %{ "DIVSD $dst,$src" %}
10423 opcode(0xF2, 0x0F, 0x5E);
10424 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
10425 ins_pipe( pipe_slow );
10426 %}
10428 instruct divXD_imm(regXD dst, immXD con) %{
10429 predicate(UseSSE>=2);
10430 match(Set dst (DivD dst con));
10431 format %{ "DIVSD $dst,[$con]" %}
10432 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), LdImmXD(dst, con));
10433 ins_pipe( pipe_slow );
10434 %}
10436 instruct divXD_mem(regXD dst, memory mem) %{
10437 predicate(UseSSE>=2);
10438 match(Set dst (DivD dst (LoadD mem)));
10439 format %{ "DIVSD $dst,$mem" %}
10440 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
10441 ins_pipe( pipe_slow );
10442 %}
10445 instruct mulD_reg(regD dst, regD src) %{
10446 predicate(UseSSE<=1);
10447 match(Set dst (MulD dst src));
10448 format %{ "FLD $src\n\t"
10449 "DMULp $dst,ST" %}
10450 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10451 ins_cost(150);
10452 ins_encode( Push_Reg_D(src),
10453 OpcP, RegOpc(dst) );
10454 ins_pipe( fpu_reg_reg );
10455 %}
10457 // Strict FP instruction biases argument before multiply then
10458 // biases result to avoid double rounding of subnormals.
10459 //
10460 // scale arg1 by multiplying arg1 by 2^(-15360)
10461 // load arg2
10462 // multiply scaled arg1 by arg2
10463 // rescale product by 2^(15360)
10464 //
10465 instruct strictfp_mulD_reg(regDPR1 dst, regnotDPR1 src) %{
10466 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10467 match(Set dst (MulD dst src));
10468 ins_cost(1); // Select this instruction for all strict FP double multiplies
10470 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10471 "DMULp $dst,ST\n\t"
10472 "FLD $src\n\t"
10473 "DMULp $dst,ST\n\t"
10474 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10475 "DMULp $dst,ST\n\t" %}
10476 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10477 ins_encode( strictfp_bias1(dst),
10478 Push_Reg_D(src),
10479 OpcP, RegOpc(dst),
10480 strictfp_bias2(dst) );
10481 ins_pipe( fpu_reg_reg );
10482 %}
10484 instruct mulD_reg_imm(regD dst, immD src) %{
10485 predicate( UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10486 match(Set dst (MulD dst src));
10487 ins_cost(200);
10488 format %{ "FLD_D [$src]\n\t"
10489 "DMULp $dst,ST" %}
10490 opcode(0xDE, 0x1); /* DE /1 */
10491 ins_encode( LdImmD(src),
10492 OpcP, RegOpc(dst) );
10493 ins_pipe( fpu_reg_mem );
10494 %}
10497 instruct mulD_reg_mem(regD dst, memory src) %{
10498 predicate( UseSSE<=1 );
10499 match(Set dst (MulD dst (LoadD src)));
10500 ins_cost(200);
10501 format %{ "FLD_D $src\n\t"
10502 "DMULp $dst,ST" %}
10503 opcode(0xDE, 0x1, 0xDD); /* DE C8+i or DE /1*/ /* LoadD DD /0 */
10504 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10505 OpcP, RegOpc(dst) );
10506 ins_pipe( fpu_reg_mem );
10507 %}
10509 //
10510 // Cisc-alternate to reg-reg multiply
10511 instruct mulD_reg_mem_cisc(regD dst, regD src, memory mem) %{
10512 predicate( UseSSE<=1 );
10513 match(Set dst (MulD src (LoadD mem)));
10514 ins_cost(250);
10515 format %{ "FLD_D $mem\n\t"
10516 "DMUL ST,$src\n\t"
10517 "FSTP_D $dst" %}
10518 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadD D9 /0 */
10519 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem),
10520 OpcReg_F(src),
10521 Pop_Reg_D(dst) );
10522 ins_pipe( fpu_reg_reg_mem );
10523 %}
10526 // MACRO3 -- addD a mulD
10527 // This instruction is a '2-address' instruction in that the result goes
10528 // back to src2. This eliminates a move from the macro; possibly the
10529 // register allocator will have to add it back (and maybe not).
10530 instruct addD_mulD_reg(regD src2, regD src1, regD src0) %{
10531 predicate( UseSSE<=1 );
10532 match(Set src2 (AddD (MulD src0 src1) src2));
10533 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10534 "DMUL ST,$src1\n\t"
10535 "DADDp $src2,ST" %}
10536 ins_cost(250);
10537 opcode(0xDD); /* LoadD DD /0 */
10538 ins_encode( Push_Reg_F(src0),
10539 FMul_ST_reg(src1),
10540 FAddP_reg_ST(src2) );
10541 ins_pipe( fpu_reg_reg_reg );
10542 %}
10545 // MACRO3 -- subD a mulD
10546 instruct subD_mulD_reg(regD src2, regD src1, regD src0) %{
10547 predicate( UseSSE<=1 );
10548 match(Set src2 (SubD (MulD src0 src1) src2));
10549 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10550 "DMUL ST,$src1\n\t"
10551 "DSUBRp $src2,ST" %}
10552 ins_cost(250);
10553 ins_encode( Push_Reg_F(src0),
10554 FMul_ST_reg(src1),
10555 Opcode(0xDE), Opc_plus(0xE0,src2));
10556 ins_pipe( fpu_reg_reg_reg );
10557 %}
10560 instruct divD_reg(regD dst, regD src) %{
10561 predicate( UseSSE<=1 );
10562 match(Set dst (DivD dst src));
10564 format %{ "FLD $src\n\t"
10565 "FDIVp $dst,ST" %}
10566 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10567 ins_cost(150);
10568 ins_encode( Push_Reg_D(src),
10569 OpcP, RegOpc(dst) );
10570 ins_pipe( fpu_reg_reg );
10571 %}
10573 // Strict FP instruction biases argument before division then
10574 // biases result, to avoid double rounding of subnormals.
10575 //
10576 // scale dividend by multiplying dividend by 2^(-15360)
10577 // load divisor
10578 // divide scaled dividend by divisor
10579 // rescale quotient by 2^(15360)
10580 //
10581 instruct strictfp_divD_reg(regDPR1 dst, regnotDPR1 src) %{
10582 predicate (UseSSE<=1);
10583 match(Set dst (DivD dst src));
10584 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10585 ins_cost(01);
10587 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10588 "DMULp $dst,ST\n\t"
10589 "FLD $src\n\t"
10590 "FDIVp $dst,ST\n\t"
10591 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10592 "DMULp $dst,ST\n\t" %}
10593 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10594 ins_encode( strictfp_bias1(dst),
10595 Push_Reg_D(src),
10596 OpcP, RegOpc(dst),
10597 strictfp_bias2(dst) );
10598 ins_pipe( fpu_reg_reg );
10599 %}
10601 instruct divD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10602 predicate( UseSSE<=1 && !(Compile::current()->has_method() && Compile::current()->method()->is_strict()) );
10603 match(Set dst (RoundDouble (DivD src1 src2)));
10605 format %{ "FLD $src1\n\t"
10606 "FDIV ST,$src2\n\t"
10607 "FSTP_D $dst\t# D-round" %}
10608 opcode(0xD8, 0x6); /* D8 F0+i or D8 /6 */
10609 ins_encode( Push_Reg_D(src1),
10610 OpcP, RegOpc(src2), Pop_Mem_D(dst) );
10611 ins_pipe( fpu_mem_reg_reg );
10612 %}
10615 instruct modD_reg(regD dst, regD src, eAXRegI rax, eFlagsReg cr) %{
10616 predicate(UseSSE<=1);
10617 match(Set dst (ModD dst src));
10618 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
10620 format %{ "DMOD $dst,$src" %}
10621 ins_cost(250);
10622 ins_encode(Push_Reg_Mod_D(dst, src),
10623 emitModD(),
10624 Push_Result_Mod_D(src),
10625 Pop_Reg_D(dst));
10626 ins_pipe( pipe_slow );
10627 %}
10629 instruct modXD_reg(regXD dst, regXD src0, regXD src1, eAXRegI rax, eFlagsReg cr) %{
10630 predicate(UseSSE>=2);
10631 match(Set dst (ModD src0 src1));
10632 effect(KILL rax, KILL cr);
10634 format %{ "SUB ESP,8\t # DMOD\n"
10635 "\tMOVSD [ESP+0],$src1\n"
10636 "\tFLD_D [ESP+0]\n"
10637 "\tMOVSD [ESP+0],$src0\n"
10638 "\tFLD_D [ESP+0]\n"
10639 "loop:\tFPREM\n"
10640 "\tFWAIT\n"
10641 "\tFNSTSW AX\n"
10642 "\tSAHF\n"
10643 "\tJP loop\n"
10644 "\tFSTP_D [ESP+0]\n"
10645 "\tMOVSD $dst,[ESP+0]\n"
10646 "\tADD ESP,8\n"
10647 "\tFSTP ST0\t # Restore FPU Stack"
10648 %}
10649 ins_cost(250);
10650 ins_encode( Push_ModD_encoding(src0, src1), emitModD(), Push_ResultXD(dst), PopFPU);
10651 ins_pipe( pipe_slow );
10652 %}
10654 instruct sinD_reg(regDPR1 dst, regDPR1 src) %{
10655 predicate (UseSSE<=1);
10656 match(Set dst (SinD src));
10657 ins_cost(1800);
10658 format %{ "DSIN $dst" %}
10659 opcode(0xD9, 0xFE);
10660 ins_encode( OpcP, OpcS );
10661 ins_pipe( pipe_slow );
10662 %}
10664 instruct sinXD_reg(regXD dst, eFlagsReg cr) %{
10665 predicate (UseSSE>=2);
10666 match(Set dst (SinD dst));
10667 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10668 ins_cost(1800);
10669 format %{ "DSIN $dst" %}
10670 opcode(0xD9, 0xFE);
10671 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10672 ins_pipe( pipe_slow );
10673 %}
10675 instruct cosD_reg(regDPR1 dst, regDPR1 src) %{
10676 predicate (UseSSE<=1);
10677 match(Set dst (CosD src));
10678 ins_cost(1800);
10679 format %{ "DCOS $dst" %}
10680 opcode(0xD9, 0xFF);
10681 ins_encode( OpcP, OpcS );
10682 ins_pipe( pipe_slow );
10683 %}
10685 instruct cosXD_reg(regXD dst, eFlagsReg cr) %{
10686 predicate (UseSSE>=2);
10687 match(Set dst (CosD dst));
10688 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10689 ins_cost(1800);
10690 format %{ "DCOS $dst" %}
10691 opcode(0xD9, 0xFF);
10692 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10693 ins_pipe( pipe_slow );
10694 %}
10696 instruct tanD_reg(regDPR1 dst, regDPR1 src) %{
10697 predicate (UseSSE<=1);
10698 match(Set dst(TanD src));
10699 format %{ "DTAN $dst" %}
10700 ins_encode( Opcode(0xD9), Opcode(0xF2), // fptan
10701 Opcode(0xDD), Opcode(0xD8)); // fstp st
10702 ins_pipe( pipe_slow );
10703 %}
10705 instruct tanXD_reg(regXD dst, eFlagsReg cr) %{
10706 predicate (UseSSE>=2);
10707 match(Set dst(TanD dst));
10708 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10709 format %{ "DTAN $dst" %}
10710 ins_encode( Push_SrcXD(dst),
10711 Opcode(0xD9), Opcode(0xF2), // fptan
10712 Opcode(0xDD), Opcode(0xD8), // fstp st
10713 Push_ResultXD(dst) );
10714 ins_pipe( pipe_slow );
10715 %}
10717 instruct atanD_reg(regD dst, regD src) %{
10718 predicate (UseSSE<=1);
10719 match(Set dst(AtanD dst src));
10720 format %{ "DATA $dst,$src" %}
10721 opcode(0xD9, 0xF3);
10722 ins_encode( Push_Reg_D(src),
10723 OpcP, OpcS, RegOpc(dst) );
10724 ins_pipe( pipe_slow );
10725 %}
10727 instruct atanXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10728 predicate (UseSSE>=2);
10729 match(Set dst(AtanD dst src));
10730 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10731 format %{ "DATA $dst,$src" %}
10732 opcode(0xD9, 0xF3);
10733 ins_encode( Push_SrcXD(src),
10734 OpcP, OpcS, Push_ResultXD(dst) );
10735 ins_pipe( pipe_slow );
10736 %}
10738 instruct sqrtD_reg(regD dst, regD src) %{
10739 predicate (UseSSE<=1);
10740 match(Set dst (SqrtD src));
10741 format %{ "DSQRT $dst,$src" %}
10742 opcode(0xFA, 0xD9);
10743 ins_encode( Push_Reg_D(src),
10744 OpcS, OpcP, Pop_Reg_D(dst) );
10745 ins_pipe( pipe_slow );
10746 %}
10748 instruct powD_reg(regD X, regDPR1 Y, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10749 predicate (UseSSE<=1);
10750 match(Set Y (PowD X Y)); // Raise X to the Yth power
10751 effect(KILL rax, KILL rbx, KILL rcx);
10752 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10753 "FLD_D $X\n\t"
10754 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10756 "FDUP \t\t\t# Q Q\n\t"
10757 "FRNDINT\t\t\t# int(Q) Q\n\t"
10758 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10759 "FISTP dword [ESP]\n\t"
10760 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10761 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10762 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10763 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10764 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10765 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10766 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10767 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10768 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10769 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10770 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10771 "MOV [ESP+0],0\n\t"
10772 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10774 "ADD ESP,8"
10775 %}
10776 ins_encode( push_stack_temp_qword,
10777 Push_Reg_D(X),
10778 Opcode(0xD9), Opcode(0xF1), // fyl2x
10779 pow_exp_core_encoding,
10780 pop_stack_temp_qword);
10781 ins_pipe( pipe_slow );
10782 %}
10784 instruct powXD_reg(regXD dst, regXD src0, regXD src1, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx ) %{
10785 predicate (UseSSE>=2);
10786 match(Set dst (PowD src0 src1)); // Raise src0 to the src1'th power
10787 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx );
10788 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10789 "MOVSD [ESP],$src1\n\t"
10790 "FLD FPR1,$src1\n\t"
10791 "MOVSD [ESP],$src0\n\t"
10792 "FLD FPR1,$src0\n\t"
10793 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10795 "FDUP \t\t\t# Q Q\n\t"
10796 "FRNDINT\t\t\t# int(Q) Q\n\t"
10797 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10798 "FISTP dword [ESP]\n\t"
10799 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10800 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10801 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10802 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10803 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10804 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10805 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10806 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10807 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10808 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10809 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10810 "MOV [ESP+0],0\n\t"
10811 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10813 "FST_D [ESP]\n\t"
10814 "MOVSD $dst,[ESP]\n\t"
10815 "ADD ESP,8"
10816 %}
10817 ins_encode( push_stack_temp_qword,
10818 push_xmm_to_fpr1(src1),
10819 push_xmm_to_fpr1(src0),
10820 Opcode(0xD9), Opcode(0xF1), // fyl2x
10821 pow_exp_core_encoding,
10822 Push_ResultXD(dst) );
10823 ins_pipe( pipe_slow );
10824 %}
10827 instruct expD_reg(regDPR1 dpr1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10828 predicate (UseSSE<=1);
10829 match(Set dpr1 (ExpD dpr1));
10830 effect(KILL rax, KILL rbx, KILL rcx);
10831 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding"
10832 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10833 "FMULP \t\t\t# Q=X*log2(e)\n\t"
10835 "FDUP \t\t\t# Q Q\n\t"
10836 "FRNDINT\t\t\t# int(Q) Q\n\t"
10837 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10838 "FISTP dword [ESP]\n\t"
10839 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10840 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10841 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10842 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10843 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10844 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10845 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10846 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10847 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10848 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10849 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10850 "MOV [ESP+0],0\n\t"
10851 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10853 "ADD ESP,8"
10854 %}
10855 ins_encode( push_stack_temp_qword,
10856 Opcode(0xD9), Opcode(0xEA), // fldl2e
10857 Opcode(0xDE), Opcode(0xC9), // fmulp
10858 pow_exp_core_encoding,
10859 pop_stack_temp_qword);
10860 ins_pipe( pipe_slow );
10861 %}
10863 instruct expXD_reg(regXD dst, regXD src, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10864 predicate (UseSSE>=2);
10865 match(Set dst (ExpD src));
10866 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx);
10867 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding\n\t"
10868 "MOVSD [ESP],$src\n\t"
10869 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10870 "FMULP \t\t\t# Q=X*log2(e) X\n\t"
10872 "FDUP \t\t\t# Q Q\n\t"
10873 "FRNDINT\t\t\t# int(Q) Q\n\t"
10874 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10875 "FISTP dword [ESP]\n\t"
10876 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10877 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10878 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10879 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10880 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10881 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10882 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10883 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10884 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10885 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10886 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10887 "MOV [ESP+0],0\n\t"
10888 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10890 "FST_D [ESP]\n\t"
10891 "MOVSD $dst,[ESP]\n\t"
10892 "ADD ESP,8"
10893 %}
10894 ins_encode( Push_SrcXD(src),
10895 Opcode(0xD9), Opcode(0xEA), // fldl2e
10896 Opcode(0xDE), Opcode(0xC9), // fmulp
10897 pow_exp_core_encoding,
10898 Push_ResultXD(dst) );
10899 ins_pipe( pipe_slow );
10900 %}
10904 instruct log10D_reg(regDPR1 dst, regDPR1 src) %{
10905 predicate (UseSSE<=1);
10906 // The source Double operand on FPU stack
10907 match(Set dst (Log10D src));
10908 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10909 // fxch ; swap ST(0) with ST(1)
10910 // fyl2x ; compute log_10(2) * log_2(x)
10911 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10912 "FXCH \n\t"
10913 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10914 %}
10915 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10916 Opcode(0xD9), Opcode(0xC9), // fxch
10917 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10919 ins_pipe( pipe_slow );
10920 %}
10922 instruct log10XD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10923 predicate (UseSSE>=2);
10924 effect(KILL cr);
10925 match(Set dst (Log10D src));
10926 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10927 // fyl2x ; compute log_10(2) * log_2(x)
10928 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10929 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10930 %}
10931 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10932 Push_SrcXD(src),
10933 Opcode(0xD9), Opcode(0xF1), // fyl2x
10934 Push_ResultXD(dst));
10936 ins_pipe( pipe_slow );
10937 %}
10939 instruct logD_reg(regDPR1 dst, regDPR1 src) %{
10940 predicate (UseSSE<=1);
10941 // The source Double operand on FPU stack
10942 match(Set dst (LogD src));
10943 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10944 // fxch ; swap ST(0) with ST(1)
10945 // fyl2x ; compute log_e(2) * log_2(x)
10946 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10947 "FXCH \n\t"
10948 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10949 %}
10950 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10951 Opcode(0xD9), Opcode(0xC9), // fxch
10952 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10954 ins_pipe( pipe_slow );
10955 %}
10957 instruct logXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10958 predicate (UseSSE>=2);
10959 effect(KILL cr);
10960 // The source and result Double operands in XMM registers
10961 match(Set dst (LogD src));
10962 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10963 // fyl2x ; compute log_e(2) * log_2(x)
10964 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10965 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10966 %}
10967 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10968 Push_SrcXD(src),
10969 Opcode(0xD9), Opcode(0xF1), // fyl2x
10970 Push_ResultXD(dst));
10971 ins_pipe( pipe_slow );
10972 %}
10974 //-------------Float Instructions-------------------------------
10975 // Float Math
10977 // Code for float compare:
10978 // fcompp();
10979 // fwait(); fnstsw_ax();
10980 // sahf();
10981 // movl(dst, unordered_result);
10982 // jcc(Assembler::parity, exit);
10983 // movl(dst, less_result);
10984 // jcc(Assembler::below, exit);
10985 // movl(dst, equal_result);
10986 // jcc(Assembler::equal, exit);
10987 // movl(dst, greater_result);
10988 // exit:
10990 // P6 version of float compare, sets condition codes in EFLAGS
10991 instruct cmpF_cc_P6(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
10992 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10993 match(Set cr (CmpF src1 src2));
10994 effect(KILL rax);
10995 ins_cost(150);
10996 format %{ "FLD $src1\n\t"
10997 "FUCOMIP ST,$src2 // P6 instruction\n\t"
10998 "JNP exit\n\t"
10999 "MOV ah,1 // saw a NaN, set CF (treat as LT)\n\t"
11000 "SAHF\n"
11001 "exit:\tNOP // avoid branch to branch" %}
11002 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
11003 ins_encode( Push_Reg_D(src1),
11004 OpcP, RegOpc(src2),
11005 cmpF_P6_fixup );
11006 ins_pipe( pipe_slow );
11007 %}
11009 instruct cmpF_cc_P6CF(eFlagsRegUCF cr, regF src1, regF src2) %{
11010 predicate(VM_Version::supports_cmov() && UseSSE == 0);
11011 match(Set cr (CmpF src1 src2));
11012 ins_cost(100);
11013 format %{ "FLD $src1\n\t"
11014 "FUCOMIP ST,$src2 // P6 instruction" %}
11015 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
11016 ins_encode( Push_Reg_D(src1),
11017 OpcP, RegOpc(src2));
11018 ins_pipe( pipe_slow );
11019 %}
11022 // Compare & branch
11023 instruct cmpF_cc(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
11024 predicate(UseSSE == 0);
11025 match(Set cr (CmpF src1 src2));
11026 effect(KILL rax);
11027 ins_cost(200);
11028 format %{ "FLD $src1\n\t"
11029 "FCOMp $src2\n\t"
11030 "FNSTSW AX\n\t"
11031 "TEST AX,0x400\n\t"
11032 "JZ,s flags\n\t"
11033 "MOV AH,1\t# unordered treat as LT\n"
11034 "flags:\tSAHF" %}
11035 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
11036 ins_encode( Push_Reg_D(src1),
11037 OpcP, RegOpc(src2),
11038 fpu_flags);
11039 ins_pipe( pipe_slow );
11040 %}
11042 // Compare vs zero into -1,0,1
11043 instruct cmpF_0(eRegI dst, regF src1, immF0 zero, eAXRegI rax, eFlagsReg cr) %{
11044 predicate(UseSSE == 0);
11045 match(Set dst (CmpF3 src1 zero));
11046 effect(KILL cr, KILL rax);
11047 ins_cost(280);
11048 format %{ "FTSTF $dst,$src1" %}
11049 opcode(0xE4, 0xD9);
11050 ins_encode( Push_Reg_D(src1),
11051 OpcS, OpcP, PopFPU,
11052 CmpF_Result(dst));
11053 ins_pipe( pipe_slow );
11054 %}
11056 // Compare into -1,0,1
11057 instruct cmpF_reg(eRegI dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
11058 predicate(UseSSE == 0);
11059 match(Set dst (CmpF3 src1 src2));
11060 effect(KILL cr, KILL rax);
11061 ins_cost(300);
11062 format %{ "FCMPF $dst,$src1,$src2" %}
11063 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
11064 ins_encode( Push_Reg_D(src1),
11065 OpcP, RegOpc(src2),
11066 CmpF_Result(dst));
11067 ins_pipe( pipe_slow );
11068 %}
11070 // float compare and set condition codes in EFLAGS by XMM regs
11071 instruct cmpX_cc(eFlagsRegU cr, regX dst, regX src, eAXRegI rax) %{
11072 predicate(UseSSE>=1);
11073 match(Set cr (CmpF dst src));
11074 effect(KILL rax);
11075 ins_cost(145);
11076 format %{ "COMISS $dst,$src\n"
11077 "\tJNP exit\n"
11078 "\tMOV ah,1 // saw a NaN, set CF\n"
11079 "\tSAHF\n"
11080 "exit:\tNOP // avoid branch to branch" %}
11081 opcode(0x0F, 0x2F);
11082 ins_encode(OpcP, OpcS, RegReg(dst, src), cmpF_P6_fixup);
11083 ins_pipe( pipe_slow );
11084 %}
11086 instruct cmpX_ccCF(eFlagsRegUCF cr, regX dst, regX src) %{
11087 predicate(UseSSE>=1);
11088 match(Set cr (CmpF dst src));
11089 ins_cost(100);
11090 format %{ "COMISS $dst,$src" %}
11091 opcode(0x0F, 0x2F);
11092 ins_encode(OpcP, OpcS, RegReg(dst, src));
11093 ins_pipe( pipe_slow );
11094 %}
11096 // float compare and set condition codes in EFLAGS by XMM regs
11097 instruct cmpX_ccmem(eFlagsRegU cr, regX dst, memory src, eAXRegI rax) %{
11098 predicate(UseSSE>=1);
11099 match(Set cr (CmpF dst (LoadF src)));
11100 effect(KILL rax);
11101 ins_cost(165);
11102 format %{ "COMISS $dst,$src\n"
11103 "\tJNP exit\n"
11104 "\tMOV ah,1 // saw a NaN, set CF\n"
11105 "\tSAHF\n"
11106 "exit:\tNOP // avoid branch to branch" %}
11107 opcode(0x0F, 0x2F);
11108 ins_encode(OpcP, OpcS, RegMem(dst, src), cmpF_P6_fixup);
11109 ins_pipe( pipe_slow );
11110 %}
11112 instruct cmpX_ccmemCF(eFlagsRegUCF cr, regX dst, memory src) %{
11113 predicate(UseSSE>=1);
11114 match(Set cr (CmpF dst (LoadF src)));
11115 ins_cost(100);
11116 format %{ "COMISS $dst,$src" %}
11117 opcode(0x0F, 0x2F);
11118 ins_encode(OpcP, OpcS, RegMem(dst, src));
11119 ins_pipe( pipe_slow );
11120 %}
11122 // Compare into -1,0,1 in XMM
11123 instruct cmpX_reg(eRegI dst, regX src1, regX src2, eFlagsReg cr) %{
11124 predicate(UseSSE>=1);
11125 match(Set dst (CmpF3 src1 src2));
11126 effect(KILL cr);
11127 ins_cost(255);
11128 format %{ "XOR $dst,$dst\n"
11129 "\tCOMISS $src1,$src2\n"
11130 "\tJP,s nan\n"
11131 "\tJEQ,s exit\n"
11132 "\tJA,s inc\n"
11133 "nan:\tDEC $dst\n"
11134 "\tJMP,s exit\n"
11135 "inc:\tINC $dst\n"
11136 "exit:"
11137 %}
11138 opcode(0x0F, 0x2F);
11139 ins_encode(Xor_Reg(dst), OpcP, OpcS, RegReg(src1, src2), CmpX_Result(dst));
11140 ins_pipe( pipe_slow );
11141 %}
11143 // Compare into -1,0,1 in XMM and memory
11144 instruct cmpX_regmem(eRegI dst, regX src1, memory mem, eFlagsReg cr) %{
11145 predicate(UseSSE>=1);
11146 match(Set dst (CmpF3 src1 (LoadF mem)));
11147 effect(KILL cr);
11148 ins_cost(275);
11149 format %{ "COMISS $src1,$mem\n"
11150 "\tMOV $dst,0\t\t# do not blow flags\n"
11151 "\tJP,s nan\n"
11152 "\tJEQ,s exit\n"
11153 "\tJA,s inc\n"
11154 "nan:\tDEC $dst\n"
11155 "\tJMP,s exit\n"
11156 "inc:\tINC $dst\n"
11157 "exit:"
11158 %}
11159 opcode(0x0F, 0x2F);
11160 ins_encode(OpcP, OpcS, RegMem(src1, mem), LdImmI(dst,0x0), CmpX_Result(dst));
11161 ins_pipe( pipe_slow );
11162 %}
11164 // Spill to obtain 24-bit precision
11165 instruct subF24_reg(stackSlotF dst, regF src1, regF src2) %{
11166 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11167 match(Set dst (SubF src1 src2));
11169 format %{ "FSUB $dst,$src1 - $src2" %}
11170 opcode(0xD8, 0x4); /* D8 E0+i or D8 /4 mod==0x3 ;; result in TOS */
11171 ins_encode( Push_Reg_F(src1),
11172 OpcReg_F(src2),
11173 Pop_Mem_F(dst) );
11174 ins_pipe( fpu_mem_reg_reg );
11175 %}
11176 //
11177 // This instruction does not round to 24-bits
11178 instruct subF_reg(regF dst, regF src) %{
11179 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11180 match(Set dst (SubF dst src));
11182 format %{ "FSUB $dst,$src" %}
11183 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
11184 ins_encode( Push_Reg_F(src),
11185 OpcP, RegOpc(dst) );
11186 ins_pipe( fpu_reg_reg );
11187 %}
11189 // Spill to obtain 24-bit precision
11190 instruct addF24_reg(stackSlotF dst, regF src1, regF src2) %{
11191 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11192 match(Set dst (AddF src1 src2));
11194 format %{ "FADD $dst,$src1,$src2" %}
11195 opcode(0xD8, 0x0); /* D8 C0+i */
11196 ins_encode( Push_Reg_F(src2),
11197 OpcReg_F(src1),
11198 Pop_Mem_F(dst) );
11199 ins_pipe( fpu_mem_reg_reg );
11200 %}
11201 //
11202 // This instruction does not round to 24-bits
11203 instruct addF_reg(regF dst, regF src) %{
11204 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11205 match(Set dst (AddF dst src));
11207 format %{ "FLD $src\n\t"
11208 "FADDp $dst,ST" %}
11209 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
11210 ins_encode( Push_Reg_F(src),
11211 OpcP, RegOpc(dst) );
11212 ins_pipe( fpu_reg_reg );
11213 %}
11215 // Add two single precision floating point values in xmm
11216 instruct addX_reg(regX dst, regX src) %{
11217 predicate(UseSSE>=1);
11218 match(Set dst (AddF dst src));
11219 format %{ "ADDSS $dst,$src" %}
11220 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
11221 ins_pipe( pipe_slow );
11222 %}
11224 instruct addX_imm(regX dst, immXF con) %{
11225 predicate(UseSSE>=1);
11226 match(Set dst (AddF dst con));
11227 format %{ "ADDSS $dst,[$con]" %}
11228 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), LdImmX(dst, con) );
11229 ins_pipe( pipe_slow );
11230 %}
11232 instruct addX_mem(regX dst, memory mem) %{
11233 predicate(UseSSE>=1);
11234 match(Set dst (AddF dst (LoadF mem)));
11235 format %{ "ADDSS $dst,$mem" %}
11236 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegMem(dst, mem));
11237 ins_pipe( pipe_slow );
11238 %}
11240 // Subtract two single precision floating point values in xmm
11241 instruct subX_reg(regX dst, regX src) %{
11242 predicate(UseSSE>=1);
11243 match(Set dst (SubF dst src));
11244 format %{ "SUBSS $dst,$src" %}
11245 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
11246 ins_pipe( pipe_slow );
11247 %}
11249 instruct subX_imm(regX dst, immXF con) %{
11250 predicate(UseSSE>=1);
11251 match(Set dst (SubF dst con));
11252 format %{ "SUBSS $dst,[$con]" %}
11253 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), LdImmX(dst, con) );
11254 ins_pipe( pipe_slow );
11255 %}
11257 instruct subX_mem(regX dst, memory mem) %{
11258 predicate(UseSSE>=1);
11259 match(Set dst (SubF dst (LoadF mem)));
11260 format %{ "SUBSS $dst,$mem" %}
11261 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
11262 ins_pipe( pipe_slow );
11263 %}
11265 // Multiply two single precision floating point values in xmm
11266 instruct mulX_reg(regX dst, regX src) %{
11267 predicate(UseSSE>=1);
11268 match(Set dst (MulF dst src));
11269 format %{ "MULSS $dst,$src" %}
11270 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
11271 ins_pipe( pipe_slow );
11272 %}
11274 instruct mulX_imm(regX dst, immXF con) %{
11275 predicate(UseSSE>=1);
11276 match(Set dst (MulF dst con));
11277 format %{ "MULSS $dst,[$con]" %}
11278 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), LdImmX(dst, con) );
11279 ins_pipe( pipe_slow );
11280 %}
11282 instruct mulX_mem(regX dst, memory mem) %{
11283 predicate(UseSSE>=1);
11284 match(Set dst (MulF dst (LoadF mem)));
11285 format %{ "MULSS $dst,$mem" %}
11286 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
11287 ins_pipe( pipe_slow );
11288 %}
11290 // Divide two single precision floating point values in xmm
11291 instruct divX_reg(regX dst, regX src) %{
11292 predicate(UseSSE>=1);
11293 match(Set dst (DivF dst src));
11294 format %{ "DIVSS $dst,$src" %}
11295 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
11296 ins_pipe( pipe_slow );
11297 %}
11299 instruct divX_imm(regX dst, immXF con) %{
11300 predicate(UseSSE>=1);
11301 match(Set dst (DivF dst con));
11302 format %{ "DIVSS $dst,[$con]" %}
11303 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), LdImmX(dst, con) );
11304 ins_pipe( pipe_slow );
11305 %}
11307 instruct divX_mem(regX dst, memory mem) %{
11308 predicate(UseSSE>=1);
11309 match(Set dst (DivF dst (LoadF mem)));
11310 format %{ "DIVSS $dst,$mem" %}
11311 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
11312 ins_pipe( pipe_slow );
11313 %}
11315 // Get the square root of a single precision floating point values in xmm
11316 instruct sqrtX_reg(regX dst, regX src) %{
11317 predicate(UseSSE>=1);
11318 match(Set dst (ConvD2F (SqrtD (ConvF2D src))));
11319 format %{ "SQRTSS $dst,$src" %}
11320 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11321 ins_pipe( pipe_slow );
11322 %}
11324 instruct sqrtX_mem(regX dst, memory mem) %{
11325 predicate(UseSSE>=1);
11326 match(Set dst (ConvD2F (SqrtD (ConvF2D (LoadF mem)))));
11327 format %{ "SQRTSS $dst,$mem" %}
11328 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11329 ins_pipe( pipe_slow );
11330 %}
11332 // Get the square root of a double precision floating point values in xmm
11333 instruct sqrtXD_reg(regXD dst, regXD src) %{
11334 predicate(UseSSE>=2);
11335 match(Set dst (SqrtD src));
11336 format %{ "SQRTSD $dst,$src" %}
11337 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11338 ins_pipe( pipe_slow );
11339 %}
11341 instruct sqrtXD_mem(regXD dst, memory mem) %{
11342 predicate(UseSSE>=2);
11343 match(Set dst (SqrtD (LoadD mem)));
11344 format %{ "SQRTSD $dst,$mem" %}
11345 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11346 ins_pipe( pipe_slow );
11347 %}
11349 instruct absF_reg(regFPR1 dst, regFPR1 src) %{
11350 predicate(UseSSE==0);
11351 match(Set dst (AbsF src));
11352 ins_cost(100);
11353 format %{ "FABS" %}
11354 opcode(0xE1, 0xD9);
11355 ins_encode( OpcS, OpcP );
11356 ins_pipe( fpu_reg_reg );
11357 %}
11359 instruct absX_reg(regX dst ) %{
11360 predicate(UseSSE>=1);
11361 match(Set dst (AbsF dst));
11362 format %{ "ANDPS $dst,[0x7FFFFFFF]\t# ABS F by sign masking" %}
11363 ins_encode( AbsXF_encoding(dst));
11364 ins_pipe( pipe_slow );
11365 %}
11367 instruct negF_reg(regFPR1 dst, regFPR1 src) %{
11368 predicate(UseSSE==0);
11369 match(Set dst (NegF src));
11370 ins_cost(100);
11371 format %{ "FCHS" %}
11372 opcode(0xE0, 0xD9);
11373 ins_encode( OpcS, OpcP );
11374 ins_pipe( fpu_reg_reg );
11375 %}
11377 instruct negX_reg( regX dst ) %{
11378 predicate(UseSSE>=1);
11379 match(Set dst (NegF dst));
11380 format %{ "XORPS $dst,[0x80000000]\t# CHS F by sign flipping" %}
11381 ins_encode( NegXF_encoding(dst));
11382 ins_pipe( pipe_slow );
11383 %}
11385 // Cisc-alternate to addF_reg
11386 // Spill to obtain 24-bit precision
11387 instruct addF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11388 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11389 match(Set dst (AddF src1 (LoadF src2)));
11391 format %{ "FLD $src2\n\t"
11392 "FADD ST,$src1\n\t"
11393 "FSTP_S $dst" %}
11394 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11395 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11396 OpcReg_F(src1),
11397 Pop_Mem_F(dst) );
11398 ins_pipe( fpu_mem_reg_mem );
11399 %}
11400 //
11401 // Cisc-alternate to addF_reg
11402 // This instruction does not round to 24-bits
11403 instruct addF_reg_mem(regF dst, memory src) %{
11404 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11405 match(Set dst (AddF dst (LoadF src)));
11407 format %{ "FADD $dst,$src" %}
11408 opcode(0xDE, 0x0, 0xD9); /* DE C0+i or DE /0*/ /* LoadF D9 /0 */
11409 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
11410 OpcP, RegOpc(dst) );
11411 ins_pipe( fpu_reg_mem );
11412 %}
11414 // // Following two instructions for _222_mpegaudio
11415 // Spill to obtain 24-bit precision
11416 instruct addF24_mem_reg(stackSlotF dst, regF src2, memory src1 ) %{
11417 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11418 match(Set dst (AddF src1 src2));
11420 format %{ "FADD $dst,$src1,$src2" %}
11421 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11422 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src1),
11423 OpcReg_F(src2),
11424 Pop_Mem_F(dst) );
11425 ins_pipe( fpu_mem_reg_mem );
11426 %}
11428 // Cisc-spill variant
11429 // Spill to obtain 24-bit precision
11430 instruct addF24_mem_cisc(stackSlotF dst, memory src1, memory src2) %{
11431 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11432 match(Set dst (AddF src1 (LoadF src2)));
11434 format %{ "FADD $dst,$src1,$src2 cisc" %}
11435 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11436 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11437 set_instruction_start,
11438 OpcP, RMopc_Mem(secondary,src1),
11439 Pop_Mem_F(dst) );
11440 ins_pipe( fpu_mem_mem_mem );
11441 %}
11443 // Spill to obtain 24-bit precision
11444 instruct addF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11445 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11446 match(Set dst (AddF src1 src2));
11448 format %{ "FADD $dst,$src1,$src2" %}
11449 opcode(0xD8, 0x0, 0xD9); /* D8 /0 */ /* LoadF D9 /0 */
11450 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11451 set_instruction_start,
11452 OpcP, RMopc_Mem(secondary,src1),
11453 Pop_Mem_F(dst) );
11454 ins_pipe( fpu_mem_mem_mem );
11455 %}
11458 // Spill to obtain 24-bit precision
11459 instruct addF24_reg_imm(stackSlotF dst, regF src1, immF src2) %{
11460 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11461 match(Set dst (AddF src1 src2));
11462 format %{ "FLD $src1\n\t"
11463 "FADD $src2\n\t"
11464 "FSTP_S $dst" %}
11465 opcode(0xD8, 0x00); /* D8 /0 */
11466 ins_encode( Push_Reg_F(src1),
11467 Opc_MemImm_F(src2),
11468 Pop_Mem_F(dst));
11469 ins_pipe( fpu_mem_reg_con );
11470 %}
11471 //
11472 // This instruction does not round to 24-bits
11473 instruct addF_reg_imm(regF dst, regF src1, immF src2) %{
11474 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11475 match(Set dst (AddF src1 src2));
11476 format %{ "FLD $src1\n\t"
11477 "FADD $src2\n\t"
11478 "FSTP_S $dst" %}
11479 opcode(0xD8, 0x00); /* D8 /0 */
11480 ins_encode( Push_Reg_F(src1),
11481 Opc_MemImm_F(src2),
11482 Pop_Reg_F(dst));
11483 ins_pipe( fpu_reg_reg_con );
11484 %}
11486 // Spill to obtain 24-bit precision
11487 instruct mulF24_reg(stackSlotF dst, regF src1, regF src2) %{
11488 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11489 match(Set dst (MulF src1 src2));
11491 format %{ "FLD $src1\n\t"
11492 "FMUL $src2\n\t"
11493 "FSTP_S $dst" %}
11494 opcode(0xD8, 0x1); /* D8 C8+i or D8 /1 ;; result in TOS */
11495 ins_encode( Push_Reg_F(src1),
11496 OpcReg_F(src2),
11497 Pop_Mem_F(dst) );
11498 ins_pipe( fpu_mem_reg_reg );
11499 %}
11500 //
11501 // This instruction does not round to 24-bits
11502 instruct mulF_reg(regF dst, regF src1, regF src2) %{
11503 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11504 match(Set dst (MulF src1 src2));
11506 format %{ "FLD $src1\n\t"
11507 "FMUL $src2\n\t"
11508 "FSTP_S $dst" %}
11509 opcode(0xD8, 0x1); /* D8 C8+i */
11510 ins_encode( Push_Reg_F(src2),
11511 OpcReg_F(src1),
11512 Pop_Reg_F(dst) );
11513 ins_pipe( fpu_reg_reg_reg );
11514 %}
11517 // Spill to obtain 24-bit precision
11518 // Cisc-alternate to reg-reg multiply
11519 instruct mulF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11520 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11521 match(Set dst (MulF src1 (LoadF src2)));
11523 format %{ "FLD_S $src2\n\t"
11524 "FMUL $src1\n\t"
11525 "FSTP_S $dst" %}
11526 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or DE /1*/ /* LoadF D9 /0 */
11527 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11528 OpcReg_F(src1),
11529 Pop_Mem_F(dst) );
11530 ins_pipe( fpu_mem_reg_mem );
11531 %}
11532 //
11533 // This instruction does not round to 24-bits
11534 // Cisc-alternate to reg-reg multiply
11535 instruct mulF_reg_mem(regF dst, regF src1, memory src2) %{
11536 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11537 match(Set dst (MulF src1 (LoadF src2)));
11539 format %{ "FMUL $dst,$src1,$src2" %}
11540 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadF D9 /0 */
11541 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11542 OpcReg_F(src1),
11543 Pop_Reg_F(dst) );
11544 ins_pipe( fpu_reg_reg_mem );
11545 %}
11547 // Spill to obtain 24-bit precision
11548 instruct mulF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11549 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11550 match(Set dst (MulF src1 src2));
11552 format %{ "FMUL $dst,$src1,$src2" %}
11553 opcode(0xD8, 0x1, 0xD9); /* D8 /1 */ /* LoadF D9 /0 */
11554 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11555 set_instruction_start,
11556 OpcP, RMopc_Mem(secondary,src1),
11557 Pop_Mem_F(dst) );
11558 ins_pipe( fpu_mem_mem_mem );
11559 %}
11561 // Spill to obtain 24-bit precision
11562 instruct mulF24_reg_imm(stackSlotF dst, regF src1, immF src2) %{
11563 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11564 match(Set dst (MulF src1 src2));
11566 format %{ "FMULc $dst,$src1,$src2" %}
11567 opcode(0xD8, 0x1); /* D8 /1*/
11568 ins_encode( Push_Reg_F(src1),
11569 Opc_MemImm_F(src2),
11570 Pop_Mem_F(dst));
11571 ins_pipe( fpu_mem_reg_con );
11572 %}
11573 //
11574 // This instruction does not round to 24-bits
11575 instruct mulF_reg_imm(regF dst, regF src1, immF src2) %{
11576 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11577 match(Set dst (MulF src1 src2));
11579 format %{ "FMULc $dst. $src1, $src2" %}
11580 opcode(0xD8, 0x1); /* D8 /1*/
11581 ins_encode( Push_Reg_F(src1),
11582 Opc_MemImm_F(src2),
11583 Pop_Reg_F(dst));
11584 ins_pipe( fpu_reg_reg_con );
11585 %}
11588 //
11589 // MACRO1 -- subsume unshared load into mulF
11590 // This instruction does not round to 24-bits
11591 instruct mulF_reg_load1(regF dst, regF src, memory mem1 ) %{
11592 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11593 match(Set dst (MulF (LoadF mem1) src));
11595 format %{ "FLD $mem1 ===MACRO1===\n\t"
11596 "FMUL ST,$src\n\t"
11597 "FSTP $dst" %}
11598 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or D8 /1 */ /* LoadF D9 /0 */
11599 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem1),
11600 OpcReg_F(src),
11601 Pop_Reg_F(dst) );
11602 ins_pipe( fpu_reg_reg_mem );
11603 %}
11604 //
11605 // MACRO2 -- addF a mulF which subsumed an unshared load
11606 // This instruction does not round to 24-bits
11607 instruct addF_mulF_reg_load1(regF dst, memory mem1, regF src1, regF src2) %{
11608 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11609 match(Set dst (AddF (MulF (LoadF mem1) src1) src2));
11610 ins_cost(95);
11612 format %{ "FLD $mem1 ===MACRO2===\n\t"
11613 "FMUL ST,$src1 subsume mulF left load\n\t"
11614 "FADD ST,$src2\n\t"
11615 "FSTP $dst" %}
11616 opcode(0xD9); /* LoadF D9 /0 */
11617 ins_encode( OpcP, RMopc_Mem(0x00,mem1),
11618 FMul_ST_reg(src1),
11619 FAdd_ST_reg(src2),
11620 Pop_Reg_F(dst) );
11621 ins_pipe( fpu_reg_mem_reg_reg );
11622 %}
11624 // MACRO3 -- addF a mulF
11625 // This instruction does not round to 24-bits. It is a '2-address'
11626 // instruction in that the result goes back to src2. This eliminates
11627 // a move from the macro; possibly the register allocator will have
11628 // to add it back (and maybe not).
11629 instruct addF_mulF_reg(regF src2, regF src1, regF src0) %{
11630 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11631 match(Set src2 (AddF (MulF src0 src1) src2));
11633 format %{ "FLD $src0 ===MACRO3===\n\t"
11634 "FMUL ST,$src1\n\t"
11635 "FADDP $src2,ST" %}
11636 opcode(0xD9); /* LoadF D9 /0 */
11637 ins_encode( Push_Reg_F(src0),
11638 FMul_ST_reg(src1),
11639 FAddP_reg_ST(src2) );
11640 ins_pipe( fpu_reg_reg_reg );
11641 %}
11643 // MACRO4 -- divF subF
11644 // This instruction does not round to 24-bits
11645 instruct subF_divF_reg(regF dst, regF src1, regF src2, regF src3) %{
11646 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11647 match(Set dst (DivF (SubF src2 src1) src3));
11649 format %{ "FLD $src2 ===MACRO4===\n\t"
11650 "FSUB ST,$src1\n\t"
11651 "FDIV ST,$src3\n\t"
11652 "FSTP $dst" %}
11653 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11654 ins_encode( Push_Reg_F(src2),
11655 subF_divF_encode(src1,src3),
11656 Pop_Reg_F(dst) );
11657 ins_pipe( fpu_reg_reg_reg_reg );
11658 %}
11660 // Spill to obtain 24-bit precision
11661 instruct divF24_reg(stackSlotF dst, regF src1, regF src2) %{
11662 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11663 match(Set dst (DivF src1 src2));
11665 format %{ "FDIV $dst,$src1,$src2" %}
11666 opcode(0xD8, 0x6); /* D8 F0+i or DE /6*/
11667 ins_encode( Push_Reg_F(src1),
11668 OpcReg_F(src2),
11669 Pop_Mem_F(dst) );
11670 ins_pipe( fpu_mem_reg_reg );
11671 %}
11672 //
11673 // This instruction does not round to 24-bits
11674 instruct divF_reg(regF dst, regF src) %{
11675 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11676 match(Set dst (DivF dst src));
11678 format %{ "FDIV $dst,$src" %}
11679 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11680 ins_encode( Push_Reg_F(src),
11681 OpcP, RegOpc(dst) );
11682 ins_pipe( fpu_reg_reg );
11683 %}
11686 // Spill to obtain 24-bit precision
11687 instruct modF24_reg(stackSlotF dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
11688 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11689 match(Set dst (ModF src1 src2));
11690 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11692 format %{ "FMOD $dst,$src1,$src2" %}
11693 ins_encode( Push_Reg_Mod_D(src1, src2),
11694 emitModD(),
11695 Push_Result_Mod_D(src2),
11696 Pop_Mem_F(dst));
11697 ins_pipe( pipe_slow );
11698 %}
11699 //
11700 // This instruction does not round to 24-bits
11701 instruct modF_reg(regF dst, regF src, eAXRegI rax, eFlagsReg cr) %{
11702 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11703 match(Set dst (ModF dst src));
11704 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11706 format %{ "FMOD $dst,$src" %}
11707 ins_encode(Push_Reg_Mod_D(dst, src),
11708 emitModD(),
11709 Push_Result_Mod_D(src),
11710 Pop_Reg_F(dst));
11711 ins_pipe( pipe_slow );
11712 %}
11714 instruct modX_reg(regX dst, regX src0, regX src1, eAXRegI rax, eFlagsReg cr) %{
11715 predicate(UseSSE>=1);
11716 match(Set dst (ModF src0 src1));
11717 effect(KILL rax, KILL cr);
11718 format %{ "SUB ESP,4\t # FMOD\n"
11719 "\tMOVSS [ESP+0],$src1\n"
11720 "\tFLD_S [ESP+0]\n"
11721 "\tMOVSS [ESP+0],$src0\n"
11722 "\tFLD_S [ESP+0]\n"
11723 "loop:\tFPREM\n"
11724 "\tFWAIT\n"
11725 "\tFNSTSW AX\n"
11726 "\tSAHF\n"
11727 "\tJP loop\n"
11728 "\tFSTP_S [ESP+0]\n"
11729 "\tMOVSS $dst,[ESP+0]\n"
11730 "\tADD ESP,4\n"
11731 "\tFSTP ST0\t # Restore FPU Stack"
11732 %}
11733 ins_cost(250);
11734 ins_encode( Push_ModX_encoding(src0, src1), emitModD(), Push_ResultX(dst,0x4), PopFPU);
11735 ins_pipe( pipe_slow );
11736 %}
11739 //----------Arithmetic Conversion Instructions---------------------------------
11740 // The conversions operations are all Alpha sorted. Please keep it that way!
11742 instruct roundFloat_mem_reg(stackSlotF dst, regF src) %{
11743 predicate(UseSSE==0);
11744 match(Set dst (RoundFloat src));
11745 ins_cost(125);
11746 format %{ "FST_S $dst,$src\t# F-round" %}
11747 ins_encode( Pop_Mem_Reg_F(dst, src) );
11748 ins_pipe( fpu_mem_reg );
11749 %}
11751 instruct roundDouble_mem_reg(stackSlotD dst, regD src) %{
11752 predicate(UseSSE<=1);
11753 match(Set dst (RoundDouble src));
11754 ins_cost(125);
11755 format %{ "FST_D $dst,$src\t# D-round" %}
11756 ins_encode( Pop_Mem_Reg_D(dst, src) );
11757 ins_pipe( fpu_mem_reg );
11758 %}
11760 // Force rounding to 24-bit precision and 6-bit exponent
11761 instruct convD2F_reg(stackSlotF dst, regD src) %{
11762 predicate(UseSSE==0);
11763 match(Set dst (ConvD2F src));
11764 format %{ "FST_S $dst,$src\t# F-round" %}
11765 expand %{
11766 roundFloat_mem_reg(dst,src);
11767 %}
11768 %}
11770 // Force rounding to 24-bit precision and 6-bit exponent
11771 instruct convD2X_reg(regX dst, regD src, eFlagsReg cr) %{
11772 predicate(UseSSE==1);
11773 match(Set dst (ConvD2F src));
11774 effect( KILL cr );
11775 format %{ "SUB ESP,4\n\t"
11776 "FST_S [ESP],$src\t# F-round\n\t"
11777 "MOVSS $dst,[ESP]\n\t"
11778 "ADD ESP,4" %}
11779 ins_encode( D2X_encoding(dst, src) );
11780 ins_pipe( pipe_slow );
11781 %}
11783 // Force rounding double precision to single precision
11784 instruct convXD2X_reg(regX dst, regXD src) %{
11785 predicate(UseSSE>=2);
11786 match(Set dst (ConvD2F src));
11787 format %{ "CVTSD2SS $dst,$src\t# F-round" %}
11788 opcode(0xF2, 0x0F, 0x5A);
11789 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11790 ins_pipe( pipe_slow );
11791 %}
11793 instruct convF2D_reg_reg(regD dst, regF src) %{
11794 predicate(UseSSE==0);
11795 match(Set dst (ConvF2D src));
11796 format %{ "FST_S $dst,$src\t# D-round" %}
11797 ins_encode( Pop_Reg_Reg_D(dst, src));
11798 ins_pipe( fpu_reg_reg );
11799 %}
11801 instruct convF2D_reg(stackSlotD dst, regF src) %{
11802 predicate(UseSSE==1);
11803 match(Set dst (ConvF2D src));
11804 format %{ "FST_D $dst,$src\t# D-round" %}
11805 expand %{
11806 roundDouble_mem_reg(dst,src);
11807 %}
11808 %}
11810 instruct convX2D_reg(regD dst, regX src, eFlagsReg cr) %{
11811 predicate(UseSSE==1);
11812 match(Set dst (ConvF2D src));
11813 effect( KILL cr );
11814 format %{ "SUB ESP,4\n\t"
11815 "MOVSS [ESP] $src\n\t"
11816 "FLD_S [ESP]\n\t"
11817 "ADD ESP,4\n\t"
11818 "FSTP $dst\t# D-round" %}
11819 ins_encode( X2D_encoding(dst, src), Pop_Reg_D(dst));
11820 ins_pipe( pipe_slow );
11821 %}
11823 instruct convX2XD_reg(regXD dst, regX src) %{
11824 predicate(UseSSE>=2);
11825 match(Set dst (ConvF2D src));
11826 format %{ "CVTSS2SD $dst,$src\t# D-round" %}
11827 opcode(0xF3, 0x0F, 0x5A);
11828 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11829 ins_pipe( pipe_slow );
11830 %}
11832 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11833 instruct convD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regD src, eFlagsReg cr ) %{
11834 predicate(UseSSE<=1);
11835 match(Set dst (ConvD2I src));
11836 effect( KILL tmp, KILL cr );
11837 format %{ "FLD $src\t# Convert double to int \n\t"
11838 "FLDCW trunc mode\n\t"
11839 "SUB ESP,4\n\t"
11840 "FISTp [ESP + #0]\n\t"
11841 "FLDCW std/24-bit mode\n\t"
11842 "POP EAX\n\t"
11843 "CMP EAX,0x80000000\n\t"
11844 "JNE,s fast\n\t"
11845 "FLD_D $src\n\t"
11846 "CALL d2i_wrapper\n"
11847 "fast:" %}
11848 ins_encode( Push_Reg_D(src), D2I_encoding(src) );
11849 ins_pipe( pipe_slow );
11850 %}
11852 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11853 instruct convXD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regXD src, eFlagsReg cr ) %{
11854 predicate(UseSSE>=2);
11855 match(Set dst (ConvD2I src));
11856 effect( KILL tmp, KILL cr );
11857 format %{ "CVTTSD2SI $dst, $src\n\t"
11858 "CMP $dst,0x80000000\n\t"
11859 "JNE,s fast\n\t"
11860 "SUB ESP, 8\n\t"
11861 "MOVSD [ESP], $src\n\t"
11862 "FLD_D [ESP]\n\t"
11863 "ADD ESP, 8\n\t"
11864 "CALL d2i_wrapper\n"
11865 "fast:" %}
11866 opcode(0x1); // double-precision conversion
11867 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11868 ins_pipe( pipe_slow );
11869 %}
11871 instruct convD2L_reg_reg( eADXRegL dst, regD src, eFlagsReg cr ) %{
11872 predicate(UseSSE<=1);
11873 match(Set dst (ConvD2L src));
11874 effect( KILL cr );
11875 format %{ "FLD $src\t# Convert double to long\n\t"
11876 "FLDCW trunc mode\n\t"
11877 "SUB ESP,8\n\t"
11878 "FISTp [ESP + #0]\n\t"
11879 "FLDCW std/24-bit mode\n\t"
11880 "POP EAX\n\t"
11881 "POP EDX\n\t"
11882 "CMP EDX,0x80000000\n\t"
11883 "JNE,s fast\n\t"
11884 "TEST EAX,EAX\n\t"
11885 "JNE,s fast\n\t"
11886 "FLD $src\n\t"
11887 "CALL d2l_wrapper\n"
11888 "fast:" %}
11889 ins_encode( Push_Reg_D(src), D2L_encoding(src) );
11890 ins_pipe( pipe_slow );
11891 %}
11893 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11894 instruct convXD2L_reg_reg( eADXRegL dst, regXD src, eFlagsReg cr ) %{
11895 predicate (UseSSE>=2);
11896 match(Set dst (ConvD2L src));
11897 effect( KILL cr );
11898 format %{ "SUB ESP,8\t# Convert double to long\n\t"
11899 "MOVSD [ESP],$src\n\t"
11900 "FLD_D [ESP]\n\t"
11901 "FLDCW trunc mode\n\t"
11902 "FISTp [ESP + #0]\n\t"
11903 "FLDCW std/24-bit mode\n\t"
11904 "POP EAX\n\t"
11905 "POP EDX\n\t"
11906 "CMP EDX,0x80000000\n\t"
11907 "JNE,s fast\n\t"
11908 "TEST EAX,EAX\n\t"
11909 "JNE,s fast\n\t"
11910 "SUB ESP,8\n\t"
11911 "MOVSD [ESP],$src\n\t"
11912 "FLD_D [ESP]\n\t"
11913 "CALL d2l_wrapper\n"
11914 "fast:" %}
11915 ins_encode( XD2L_encoding(src) );
11916 ins_pipe( pipe_slow );
11917 %}
11919 // Convert a double to an int. Java semantics require we do complex
11920 // manglations in the corner cases. So we set the rounding mode to
11921 // 'zero', store the darned double down as an int, and reset the
11922 // rounding mode to 'nearest'. The hardware stores a flag value down
11923 // if we would overflow or converted a NAN; we check for this and
11924 // and go the slow path if needed.
11925 instruct convF2I_reg_reg(eAXRegI dst, eDXRegI tmp, regF src, eFlagsReg cr ) %{
11926 predicate(UseSSE==0);
11927 match(Set dst (ConvF2I src));
11928 effect( KILL tmp, KILL cr );
11929 format %{ "FLD $src\t# Convert float to int \n\t"
11930 "FLDCW trunc mode\n\t"
11931 "SUB ESP,4\n\t"
11932 "FISTp [ESP + #0]\n\t"
11933 "FLDCW std/24-bit mode\n\t"
11934 "POP EAX\n\t"
11935 "CMP EAX,0x80000000\n\t"
11936 "JNE,s fast\n\t"
11937 "FLD $src\n\t"
11938 "CALL d2i_wrapper\n"
11939 "fast:" %}
11940 // D2I_encoding works for F2I
11941 ins_encode( Push_Reg_F(src), D2I_encoding(src) );
11942 ins_pipe( pipe_slow );
11943 %}
11945 // Convert a float in xmm to an int reg.
11946 instruct convX2I_reg(eAXRegI dst, eDXRegI tmp, regX src, eFlagsReg cr ) %{
11947 predicate(UseSSE>=1);
11948 match(Set dst (ConvF2I src));
11949 effect( KILL tmp, KILL cr );
11950 format %{ "CVTTSS2SI $dst, $src\n\t"
11951 "CMP $dst,0x80000000\n\t"
11952 "JNE,s fast\n\t"
11953 "SUB ESP, 4\n\t"
11954 "MOVSS [ESP], $src\n\t"
11955 "FLD [ESP]\n\t"
11956 "ADD ESP, 4\n\t"
11957 "CALL d2i_wrapper\n"
11958 "fast:" %}
11959 opcode(0x0); // single-precision conversion
11960 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11961 ins_pipe( pipe_slow );
11962 %}
11964 instruct convF2L_reg_reg( eADXRegL dst, regF src, eFlagsReg cr ) %{
11965 predicate(UseSSE==0);
11966 match(Set dst (ConvF2L src));
11967 effect( KILL cr );
11968 format %{ "FLD $src\t# Convert float to long\n\t"
11969 "FLDCW trunc mode\n\t"
11970 "SUB ESP,8\n\t"
11971 "FISTp [ESP + #0]\n\t"
11972 "FLDCW std/24-bit mode\n\t"
11973 "POP EAX\n\t"
11974 "POP EDX\n\t"
11975 "CMP EDX,0x80000000\n\t"
11976 "JNE,s fast\n\t"
11977 "TEST EAX,EAX\n\t"
11978 "JNE,s fast\n\t"
11979 "FLD $src\n\t"
11980 "CALL d2l_wrapper\n"
11981 "fast:" %}
11982 // D2L_encoding works for F2L
11983 ins_encode( Push_Reg_F(src), D2L_encoding(src) );
11984 ins_pipe( pipe_slow );
11985 %}
11987 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11988 instruct convX2L_reg_reg( eADXRegL dst, regX src, eFlagsReg cr ) %{
11989 predicate (UseSSE>=1);
11990 match(Set dst (ConvF2L src));
11991 effect( KILL cr );
11992 format %{ "SUB ESP,8\t# Convert float to long\n\t"
11993 "MOVSS [ESP],$src\n\t"
11994 "FLD_S [ESP]\n\t"
11995 "FLDCW trunc mode\n\t"
11996 "FISTp [ESP + #0]\n\t"
11997 "FLDCW std/24-bit mode\n\t"
11998 "POP EAX\n\t"
11999 "POP EDX\n\t"
12000 "CMP EDX,0x80000000\n\t"
12001 "JNE,s fast\n\t"
12002 "TEST EAX,EAX\n\t"
12003 "JNE,s fast\n\t"
12004 "SUB ESP,4\t# Convert float to long\n\t"
12005 "MOVSS [ESP],$src\n\t"
12006 "FLD_S [ESP]\n\t"
12007 "ADD ESP,4\n\t"
12008 "CALL d2l_wrapper\n"
12009 "fast:" %}
12010 ins_encode( X2L_encoding(src) );
12011 ins_pipe( pipe_slow );
12012 %}
12014 instruct convI2D_reg(regD dst, stackSlotI src) %{
12015 predicate( UseSSE<=1 );
12016 match(Set dst (ConvI2D src));
12017 format %{ "FILD $src\n\t"
12018 "FSTP $dst" %}
12019 opcode(0xDB, 0x0); /* DB /0 */
12020 ins_encode(Push_Mem_I(src), Pop_Reg_D(dst));
12021 ins_pipe( fpu_reg_mem );
12022 %}
12024 instruct convI2XD_reg(regXD dst, eRegI src) %{
12025 predicate( UseSSE>=2 && !UseXmmI2D );
12026 match(Set dst (ConvI2D src));
12027 format %{ "CVTSI2SD $dst,$src" %}
12028 opcode(0xF2, 0x0F, 0x2A);
12029 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
12030 ins_pipe( pipe_slow );
12031 %}
12033 instruct convI2XD_mem(regXD dst, memory mem) %{
12034 predicate( UseSSE>=2 );
12035 match(Set dst (ConvI2D (LoadI mem)));
12036 format %{ "CVTSI2SD $dst,$mem" %}
12037 opcode(0xF2, 0x0F, 0x2A);
12038 ins_encode( OpcP, OpcS, Opcode(tertiary), RegMem(dst, mem));
12039 ins_pipe( pipe_slow );
12040 %}
12042 instruct convXI2XD_reg(regXD dst, eRegI src)
12043 %{
12044 predicate( UseSSE>=2 && UseXmmI2D );
12045 match(Set dst (ConvI2D src));
12047 format %{ "MOVD $dst,$src\n\t"
12048 "CVTDQ2PD $dst,$dst\t# i2d" %}
12049 ins_encode %{
12050 __ movdl($dst$$XMMRegister, $src$$Register);
12051 __ cvtdq2pd($dst$$XMMRegister, $dst$$XMMRegister);
12052 %}
12053 ins_pipe(pipe_slow); // XXX
12054 %}
12056 instruct convI2D_mem(regD dst, memory mem) %{
12057 predicate( UseSSE<=1 && !Compile::current()->select_24_bit_instr());
12058 match(Set dst (ConvI2D (LoadI mem)));
12059 format %{ "FILD $mem\n\t"
12060 "FSTP $dst" %}
12061 opcode(0xDB); /* DB /0 */
12062 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12063 Pop_Reg_D(dst));
12064 ins_pipe( fpu_reg_mem );
12065 %}
12067 // Convert a byte to a float; no rounding step needed.
12068 instruct conv24I2F_reg(regF dst, stackSlotI src) %{
12069 predicate( UseSSE==0 && n->in(1)->Opcode() == Op_AndI && n->in(1)->in(2)->is_Con() && n->in(1)->in(2)->get_int() == 255 );
12070 match(Set dst (ConvI2F src));
12071 format %{ "FILD $src\n\t"
12072 "FSTP $dst" %}
12074 opcode(0xDB, 0x0); /* DB /0 */
12075 ins_encode(Push_Mem_I(src), Pop_Reg_F(dst));
12076 ins_pipe( fpu_reg_mem );
12077 %}
12079 // In 24-bit mode, force exponent rounding by storing back out
12080 instruct convI2F_SSF(stackSlotF dst, stackSlotI src) %{
12081 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
12082 match(Set dst (ConvI2F src));
12083 ins_cost(200);
12084 format %{ "FILD $src\n\t"
12085 "FSTP_S $dst" %}
12086 opcode(0xDB, 0x0); /* DB /0 */
12087 ins_encode( Push_Mem_I(src),
12088 Pop_Mem_F(dst));
12089 ins_pipe( fpu_mem_mem );
12090 %}
12092 // In 24-bit mode, force exponent rounding by storing back out
12093 instruct convI2F_SSF_mem(stackSlotF dst, memory mem) %{
12094 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
12095 match(Set dst (ConvI2F (LoadI mem)));
12096 ins_cost(200);
12097 format %{ "FILD $mem\n\t"
12098 "FSTP_S $dst" %}
12099 opcode(0xDB); /* DB /0 */
12100 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12101 Pop_Mem_F(dst));
12102 ins_pipe( fpu_mem_mem );
12103 %}
12105 // This instruction does not round to 24-bits
12106 instruct convI2F_reg(regF dst, stackSlotI src) %{
12107 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
12108 match(Set dst (ConvI2F src));
12109 format %{ "FILD $src\n\t"
12110 "FSTP $dst" %}
12111 opcode(0xDB, 0x0); /* DB /0 */
12112 ins_encode( Push_Mem_I(src),
12113 Pop_Reg_F(dst));
12114 ins_pipe( fpu_reg_mem );
12115 %}
12117 // This instruction does not round to 24-bits
12118 instruct convI2F_mem(regF dst, memory mem) %{
12119 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
12120 match(Set dst (ConvI2F (LoadI mem)));
12121 format %{ "FILD $mem\n\t"
12122 "FSTP $dst" %}
12123 opcode(0xDB); /* DB /0 */
12124 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12125 Pop_Reg_F(dst));
12126 ins_pipe( fpu_reg_mem );
12127 %}
12129 // Convert an int to a float in xmm; no rounding step needed.
12130 instruct convI2X_reg(regX dst, eRegI src) %{
12131 predicate( UseSSE==1 || UseSSE>=2 && !UseXmmI2F );
12132 match(Set dst (ConvI2F src));
12133 format %{ "CVTSI2SS $dst, $src" %}
12135 opcode(0xF3, 0x0F, 0x2A); /* F3 0F 2A /r */
12136 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
12137 ins_pipe( pipe_slow );
12138 %}
12140 instruct convXI2X_reg(regX dst, eRegI src)
12141 %{
12142 predicate( UseSSE>=2 && UseXmmI2F );
12143 match(Set dst (ConvI2F src));
12145 format %{ "MOVD $dst,$src\n\t"
12146 "CVTDQ2PS $dst,$dst\t# i2f" %}
12147 ins_encode %{
12148 __ movdl($dst$$XMMRegister, $src$$Register);
12149 __ cvtdq2ps($dst$$XMMRegister, $dst$$XMMRegister);
12150 %}
12151 ins_pipe(pipe_slow); // XXX
12152 %}
12154 instruct convI2L_reg( eRegL dst, eRegI src, eFlagsReg cr) %{
12155 match(Set dst (ConvI2L src));
12156 effect(KILL cr);
12157 ins_cost(375);
12158 format %{ "MOV $dst.lo,$src\n\t"
12159 "MOV $dst.hi,$src\n\t"
12160 "SAR $dst.hi,31" %}
12161 ins_encode(convert_int_long(dst,src));
12162 ins_pipe( ialu_reg_reg_long );
12163 %}
12165 // Zero-extend convert int to long
12166 instruct convI2L_reg_zex(eRegL dst, eRegI src, immL_32bits mask, eFlagsReg flags ) %{
12167 match(Set dst (AndL (ConvI2L src) mask) );
12168 effect( KILL flags );
12169 ins_cost(250);
12170 format %{ "MOV $dst.lo,$src\n\t"
12171 "XOR $dst.hi,$dst.hi" %}
12172 opcode(0x33); // XOR
12173 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
12174 ins_pipe( ialu_reg_reg_long );
12175 %}
12177 // Zero-extend long
12178 instruct zerox_long(eRegL dst, eRegL src, immL_32bits mask, eFlagsReg flags ) %{
12179 match(Set dst (AndL src mask) );
12180 effect( KILL flags );
12181 ins_cost(250);
12182 format %{ "MOV $dst.lo,$src.lo\n\t"
12183 "XOR $dst.hi,$dst.hi\n\t" %}
12184 opcode(0x33); // XOR
12185 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
12186 ins_pipe( ialu_reg_reg_long );
12187 %}
12189 instruct convL2D_reg( stackSlotD dst, eRegL src, eFlagsReg cr) %{
12190 predicate (UseSSE<=1);
12191 match(Set dst (ConvL2D src));
12192 effect( KILL cr );
12193 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12194 "PUSH $src.lo\n\t"
12195 "FILD ST,[ESP + #0]\n\t"
12196 "ADD ESP,8\n\t"
12197 "FSTP_D $dst\t# D-round" %}
12198 opcode(0xDF, 0x5); /* DF /5 */
12199 ins_encode(convert_long_double(src), Pop_Mem_D(dst));
12200 ins_pipe( pipe_slow );
12201 %}
12203 instruct convL2XD_reg( regXD dst, eRegL src, eFlagsReg cr) %{
12204 predicate (UseSSE>=2);
12205 match(Set dst (ConvL2D src));
12206 effect( KILL cr );
12207 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12208 "PUSH $src.lo\n\t"
12209 "FILD_D [ESP]\n\t"
12210 "FSTP_D [ESP]\n\t"
12211 "MOVSD $dst,[ESP]\n\t"
12212 "ADD ESP,8" %}
12213 opcode(0xDF, 0x5); /* DF /5 */
12214 ins_encode(convert_long_double2(src), Push_ResultXD(dst));
12215 ins_pipe( pipe_slow );
12216 %}
12218 instruct convL2X_reg( regX dst, eRegL src, eFlagsReg cr) %{
12219 predicate (UseSSE>=1);
12220 match(Set dst (ConvL2F src));
12221 effect( KILL cr );
12222 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12223 "PUSH $src.lo\n\t"
12224 "FILD_D [ESP]\n\t"
12225 "FSTP_S [ESP]\n\t"
12226 "MOVSS $dst,[ESP]\n\t"
12227 "ADD ESP,8" %}
12228 opcode(0xDF, 0x5); /* DF /5 */
12229 ins_encode(convert_long_double2(src), Push_ResultX(dst,0x8));
12230 ins_pipe( pipe_slow );
12231 %}
12233 instruct convL2F_reg( stackSlotF dst, eRegL src, eFlagsReg cr) %{
12234 match(Set dst (ConvL2F src));
12235 effect( KILL cr );
12236 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12237 "PUSH $src.lo\n\t"
12238 "FILD ST,[ESP + #0]\n\t"
12239 "ADD ESP,8\n\t"
12240 "FSTP_S $dst\t# F-round" %}
12241 opcode(0xDF, 0x5); /* DF /5 */
12242 ins_encode(convert_long_double(src), Pop_Mem_F(dst));
12243 ins_pipe( pipe_slow );
12244 %}
12246 instruct convL2I_reg( eRegI dst, eRegL src ) %{
12247 match(Set dst (ConvL2I src));
12248 effect( DEF dst, USE src );
12249 format %{ "MOV $dst,$src.lo" %}
12250 ins_encode(enc_CopyL_Lo(dst,src));
12251 ins_pipe( ialu_reg_reg );
12252 %}
12255 instruct MoveF2I_stack_reg(eRegI dst, stackSlotF src) %{
12256 match(Set dst (MoveF2I src));
12257 effect( DEF dst, USE src );
12258 ins_cost(100);
12259 format %{ "MOV $dst,$src\t# MoveF2I_stack_reg" %}
12260 opcode(0x8B);
12261 ins_encode( OpcP, RegMem(dst,src));
12262 ins_pipe( ialu_reg_mem );
12263 %}
12265 instruct MoveF2I_reg_stack(stackSlotI dst, regF src) %{
12266 predicate(UseSSE==0);
12267 match(Set dst (MoveF2I src));
12268 effect( DEF dst, USE src );
12270 ins_cost(125);
12271 format %{ "FST_S $dst,$src\t# MoveF2I_reg_stack" %}
12272 ins_encode( Pop_Mem_Reg_F(dst, src) );
12273 ins_pipe( fpu_mem_reg );
12274 %}
12276 instruct MoveF2I_reg_stack_sse(stackSlotI dst, regX src) %{
12277 predicate(UseSSE>=1);
12278 match(Set dst (MoveF2I src));
12279 effect( DEF dst, USE src );
12281 ins_cost(95);
12282 format %{ "MOVSS $dst,$src\t# MoveF2I_reg_stack_sse" %}
12283 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, dst));
12284 ins_pipe( pipe_slow );
12285 %}
12287 instruct MoveF2I_reg_reg_sse(eRegI dst, regX src) %{
12288 predicate(UseSSE>=2);
12289 match(Set dst (MoveF2I src));
12290 effect( DEF dst, USE src );
12291 ins_cost(85);
12292 format %{ "MOVD $dst,$src\t# MoveF2I_reg_reg_sse" %}
12293 ins_encode( MovX2I_reg(dst, src));
12294 ins_pipe( pipe_slow );
12295 %}
12297 instruct MoveI2F_reg_stack(stackSlotF dst, eRegI src) %{
12298 match(Set dst (MoveI2F src));
12299 effect( DEF dst, USE src );
12301 ins_cost(100);
12302 format %{ "MOV $dst,$src\t# MoveI2F_reg_stack" %}
12303 opcode(0x89);
12304 ins_encode( OpcPRegSS( dst, src ) );
12305 ins_pipe( ialu_mem_reg );
12306 %}
12309 instruct MoveI2F_stack_reg(regF dst, stackSlotI src) %{
12310 predicate(UseSSE==0);
12311 match(Set dst (MoveI2F src));
12312 effect(DEF dst, USE src);
12314 ins_cost(125);
12315 format %{ "FLD_S $src\n\t"
12316 "FSTP $dst\t# MoveI2F_stack_reg" %}
12317 opcode(0xD9); /* D9 /0, FLD m32real */
12318 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12319 Pop_Reg_F(dst) );
12320 ins_pipe( fpu_reg_mem );
12321 %}
12323 instruct MoveI2F_stack_reg_sse(regX dst, stackSlotI src) %{
12324 predicate(UseSSE>=1);
12325 match(Set dst (MoveI2F src));
12326 effect( DEF dst, USE src );
12328 ins_cost(95);
12329 format %{ "MOVSS $dst,$src\t# MoveI2F_stack_reg_sse" %}
12330 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12331 ins_pipe( pipe_slow );
12332 %}
12334 instruct MoveI2F_reg_reg_sse(regX dst, eRegI src) %{
12335 predicate(UseSSE>=2);
12336 match(Set dst (MoveI2F src));
12337 effect( DEF dst, USE src );
12339 ins_cost(85);
12340 format %{ "MOVD $dst,$src\t# MoveI2F_reg_reg_sse" %}
12341 ins_encode( MovI2X_reg(dst, src) );
12342 ins_pipe( pipe_slow );
12343 %}
12345 instruct MoveD2L_stack_reg(eRegL dst, stackSlotD src) %{
12346 match(Set dst (MoveD2L src));
12347 effect(DEF dst, USE src);
12349 ins_cost(250);
12350 format %{ "MOV $dst.lo,$src\n\t"
12351 "MOV $dst.hi,$src+4\t# MoveD2L_stack_reg" %}
12352 opcode(0x8B, 0x8B);
12353 ins_encode( OpcP, RegMem(dst,src), OpcS, RegMem_Hi(dst,src));
12354 ins_pipe( ialu_mem_long_reg );
12355 %}
12357 instruct MoveD2L_reg_stack(stackSlotL dst, regD src) %{
12358 predicate(UseSSE<=1);
12359 match(Set dst (MoveD2L src));
12360 effect(DEF dst, USE src);
12362 ins_cost(125);
12363 format %{ "FST_D $dst,$src\t# MoveD2L_reg_stack" %}
12364 ins_encode( Pop_Mem_Reg_D(dst, src) );
12365 ins_pipe( fpu_mem_reg );
12366 %}
12368 instruct MoveD2L_reg_stack_sse(stackSlotL dst, regXD src) %{
12369 predicate(UseSSE>=2);
12370 match(Set dst (MoveD2L src));
12371 effect(DEF dst, USE src);
12372 ins_cost(95);
12374 format %{ "MOVSD $dst,$src\t# MoveD2L_reg_stack_sse" %}
12375 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src,dst));
12376 ins_pipe( pipe_slow );
12377 %}
12379 instruct MoveD2L_reg_reg_sse(eRegL dst, regXD src, regXD tmp) %{
12380 predicate(UseSSE>=2);
12381 match(Set dst (MoveD2L src));
12382 effect(DEF dst, USE src, TEMP tmp);
12383 ins_cost(85);
12384 format %{ "MOVD $dst.lo,$src\n\t"
12385 "PSHUFLW $tmp,$src,0x4E\n\t"
12386 "MOVD $dst.hi,$tmp\t# MoveD2L_reg_reg_sse" %}
12387 ins_encode( MovXD2L_reg(dst, src, tmp) );
12388 ins_pipe( pipe_slow );
12389 %}
12391 instruct MoveL2D_reg_stack(stackSlotD dst, eRegL src) %{
12392 match(Set dst (MoveL2D src));
12393 effect(DEF dst, USE src);
12395 ins_cost(200);
12396 format %{ "MOV $dst,$src.lo\n\t"
12397 "MOV $dst+4,$src.hi\t# MoveL2D_reg_stack" %}
12398 opcode(0x89, 0x89);
12399 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
12400 ins_pipe( ialu_mem_long_reg );
12401 %}
12404 instruct MoveL2D_stack_reg(regD dst, stackSlotL src) %{
12405 predicate(UseSSE<=1);
12406 match(Set dst (MoveL2D src));
12407 effect(DEF dst, USE src);
12408 ins_cost(125);
12410 format %{ "FLD_D $src\n\t"
12411 "FSTP $dst\t# MoveL2D_stack_reg" %}
12412 opcode(0xDD); /* DD /0, FLD m64real */
12413 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12414 Pop_Reg_D(dst) );
12415 ins_pipe( fpu_reg_mem );
12416 %}
12419 instruct MoveL2D_stack_reg_sse(regXD dst, stackSlotL src) %{
12420 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
12421 match(Set dst (MoveL2D src));
12422 effect(DEF dst, USE src);
12424 ins_cost(95);
12425 format %{ "MOVSD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12426 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12427 ins_pipe( pipe_slow );
12428 %}
12430 instruct MoveL2D_stack_reg_sse_partial(regXD dst, stackSlotL src) %{
12431 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
12432 match(Set dst (MoveL2D src));
12433 effect(DEF dst, USE src);
12435 ins_cost(95);
12436 format %{ "MOVLPD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12437 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,src));
12438 ins_pipe( pipe_slow );
12439 %}
12441 instruct MoveL2D_reg_reg_sse(regXD dst, eRegL src, regXD tmp) %{
12442 predicate(UseSSE>=2);
12443 match(Set dst (MoveL2D src));
12444 effect(TEMP dst, USE src, TEMP tmp);
12445 ins_cost(85);
12446 format %{ "MOVD $dst,$src.lo\n\t"
12447 "MOVD $tmp,$src.hi\n\t"
12448 "PUNPCKLDQ $dst,$tmp\t# MoveL2D_reg_reg_sse" %}
12449 ins_encode( MovL2XD_reg(dst, src, tmp) );
12450 ins_pipe( pipe_slow );
12451 %}
12453 // Replicate scalar to packed byte (1 byte) values in xmm
12454 instruct Repl8B_reg(regXD dst, regXD src) %{
12455 predicate(UseSSE>=2);
12456 match(Set dst (Replicate8B src));
12457 format %{ "MOVDQA $dst,$src\n\t"
12458 "PUNPCKLBW $dst,$dst\n\t"
12459 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12460 ins_encode( pshufd_8x8(dst, src));
12461 ins_pipe( pipe_slow );
12462 %}
12464 // Replicate scalar to packed byte (1 byte) values in xmm
12465 instruct Repl8B_eRegI(regXD dst, eRegI src) %{
12466 predicate(UseSSE>=2);
12467 match(Set dst (Replicate8B src));
12468 format %{ "MOVD $dst,$src\n\t"
12469 "PUNPCKLBW $dst,$dst\n\t"
12470 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12471 ins_encode( mov_i2x(dst, src), pshufd_8x8(dst, dst));
12472 ins_pipe( pipe_slow );
12473 %}
12475 // Replicate scalar zero to packed byte (1 byte) values in xmm
12476 instruct Repl8B_immI0(regXD dst, immI0 zero) %{
12477 predicate(UseSSE>=2);
12478 match(Set dst (Replicate8B zero));
12479 format %{ "PXOR $dst,$dst\t! replicate8B" %}
12480 ins_encode( pxor(dst, dst));
12481 ins_pipe( fpu_reg_reg );
12482 %}
12484 // Replicate scalar to packed shore (2 byte) values in xmm
12485 instruct Repl4S_reg(regXD dst, regXD src) %{
12486 predicate(UseSSE>=2);
12487 match(Set dst (Replicate4S src));
12488 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4S" %}
12489 ins_encode( pshufd_4x16(dst, src));
12490 ins_pipe( fpu_reg_reg );
12491 %}
12493 // Replicate scalar to packed shore (2 byte) values in xmm
12494 instruct Repl4S_eRegI(regXD dst, eRegI src) %{
12495 predicate(UseSSE>=2);
12496 match(Set dst (Replicate4S src));
12497 format %{ "MOVD $dst,$src\n\t"
12498 "PSHUFLW $dst,$dst,0x00\t! replicate4S" %}
12499 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12500 ins_pipe( fpu_reg_reg );
12501 %}
12503 // Replicate scalar zero to packed short (2 byte) values in xmm
12504 instruct Repl4S_immI0(regXD dst, immI0 zero) %{
12505 predicate(UseSSE>=2);
12506 match(Set dst (Replicate4S zero));
12507 format %{ "PXOR $dst,$dst\t! replicate4S" %}
12508 ins_encode( pxor(dst, dst));
12509 ins_pipe( fpu_reg_reg );
12510 %}
12512 // Replicate scalar to packed char (2 byte) values in xmm
12513 instruct Repl4C_reg(regXD dst, regXD src) %{
12514 predicate(UseSSE>=2);
12515 match(Set dst (Replicate4C src));
12516 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4C" %}
12517 ins_encode( pshufd_4x16(dst, src));
12518 ins_pipe( fpu_reg_reg );
12519 %}
12521 // Replicate scalar to packed char (2 byte) values in xmm
12522 instruct Repl4C_eRegI(regXD dst, eRegI src) %{
12523 predicate(UseSSE>=2);
12524 match(Set dst (Replicate4C src));
12525 format %{ "MOVD $dst,$src\n\t"
12526 "PSHUFLW $dst,$dst,0x00\t! replicate4C" %}
12527 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12528 ins_pipe( fpu_reg_reg );
12529 %}
12531 // Replicate scalar zero to packed char (2 byte) values in xmm
12532 instruct Repl4C_immI0(regXD dst, immI0 zero) %{
12533 predicate(UseSSE>=2);
12534 match(Set dst (Replicate4C zero));
12535 format %{ "PXOR $dst,$dst\t! replicate4C" %}
12536 ins_encode( pxor(dst, dst));
12537 ins_pipe( fpu_reg_reg );
12538 %}
12540 // Replicate scalar to packed integer (4 byte) values in xmm
12541 instruct Repl2I_reg(regXD dst, regXD src) %{
12542 predicate(UseSSE>=2);
12543 match(Set dst (Replicate2I src));
12544 format %{ "PSHUFD $dst,$src,0x00\t! replicate2I" %}
12545 ins_encode( pshufd(dst, src, 0x00));
12546 ins_pipe( fpu_reg_reg );
12547 %}
12549 // Replicate scalar to packed integer (4 byte) values in xmm
12550 instruct Repl2I_eRegI(regXD dst, eRegI src) %{
12551 predicate(UseSSE>=2);
12552 match(Set dst (Replicate2I src));
12553 format %{ "MOVD $dst,$src\n\t"
12554 "PSHUFD $dst,$dst,0x00\t! replicate2I" %}
12555 ins_encode( mov_i2x(dst, src), pshufd(dst, dst, 0x00));
12556 ins_pipe( fpu_reg_reg );
12557 %}
12559 // Replicate scalar zero to packed integer (2 byte) values in xmm
12560 instruct Repl2I_immI0(regXD dst, immI0 zero) %{
12561 predicate(UseSSE>=2);
12562 match(Set dst (Replicate2I zero));
12563 format %{ "PXOR $dst,$dst\t! replicate2I" %}
12564 ins_encode( pxor(dst, dst));
12565 ins_pipe( fpu_reg_reg );
12566 %}
12568 // Replicate scalar to packed single precision floating point values in xmm
12569 instruct Repl2F_reg(regXD dst, regXD src) %{
12570 predicate(UseSSE>=2);
12571 match(Set dst (Replicate2F src));
12572 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12573 ins_encode( pshufd(dst, src, 0xe0));
12574 ins_pipe( fpu_reg_reg );
12575 %}
12577 // Replicate scalar to packed single precision floating point values in xmm
12578 instruct Repl2F_regX(regXD dst, regX src) %{
12579 predicate(UseSSE>=2);
12580 match(Set dst (Replicate2F src));
12581 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12582 ins_encode( pshufd(dst, src, 0xe0));
12583 ins_pipe( fpu_reg_reg );
12584 %}
12586 // Replicate scalar to packed single precision floating point values in xmm
12587 instruct Repl2F_immXF0(regXD dst, immXF0 zero) %{
12588 predicate(UseSSE>=2);
12589 match(Set dst (Replicate2F zero));
12590 format %{ "PXOR $dst,$dst\t! replicate2F" %}
12591 ins_encode( pxor(dst, dst));
12592 ins_pipe( fpu_reg_reg );
12593 %}
12595 // =======================================================================
12596 // fast clearing of an array
12597 instruct rep_stos(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
12598 match(Set dummy (ClearArray cnt base));
12599 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
12600 format %{ "SHL ECX,1\t# Convert doublewords to words\n\t"
12601 "XOR EAX,EAX\n\t"
12602 "REP STOS\t# store EAX into [EDI++] while ECX--" %}
12603 opcode(0,0x4);
12604 ins_encode( Opcode(0xD1), RegOpc(ECX),
12605 OpcRegReg(0x33,EAX,EAX),
12606 Opcode(0xF3), Opcode(0xAB) );
12607 ins_pipe( pipe_slow );
12608 %}
12610 instruct string_compare(eDIRegP str1, eCXRegI cnt1, eSIRegP str2, eBXRegI cnt2,
12611 eAXRegI result, regXD tmp1, regXD tmp2, eFlagsReg cr) %{
12612 match(Set result (StrComp (Binary str1 cnt1) (Binary str2 cnt2)));
12613 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL cr);
12615 format %{ "String Compare $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp1, $tmp2" %}
12616 ins_encode %{
12617 __ string_compare($str1$$Register, $str2$$Register,
12618 $cnt1$$Register, $cnt2$$Register, $result$$Register,
12619 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12620 %}
12621 ins_pipe( pipe_slow );
12622 %}
12624 // fast string equals
12625 instruct string_equals(eDIRegP str1, eSIRegP str2, eCXRegI cnt, eAXRegI result,
12626 regXD tmp1, regXD tmp2, eBXRegI tmp3, eFlagsReg cr) %{
12627 match(Set result (StrEquals (Binary str1 str2) cnt));
12628 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt, KILL tmp3, KILL cr);
12630 format %{ "String Equals $str1,$str2,$cnt -> $result // KILL $tmp1, $tmp2, $tmp3" %}
12631 ins_encode %{
12632 __ char_arrays_equals(false, $str1$$Register, $str2$$Register,
12633 $cnt$$Register, $result$$Register, $tmp3$$Register,
12634 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12635 %}
12636 ins_pipe( pipe_slow );
12637 %}
12639 instruct string_indexof(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, eAXRegI cnt2,
12640 eBXRegI result, regXD tmp1, eCXRegI tmp2, eFlagsReg cr) %{
12641 predicate(UseSSE42Intrinsics);
12642 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 cnt2)));
12643 effect(TEMP tmp1, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL tmp2, KILL cr);
12645 format %{ "String IndexOf $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp2, $tmp1" %}
12646 ins_encode %{
12647 __ string_indexof($str1$$Register, $str2$$Register,
12648 $cnt1$$Register, $cnt2$$Register, $result$$Register,
12649 $tmp1$$XMMRegister, $tmp2$$Register);
12650 %}
12651 ins_pipe( pipe_slow );
12652 %}
12654 // fast array equals
12655 instruct array_equals(eDIRegP ary1, eSIRegP ary2, eAXRegI result,
12656 regXD tmp1, regXD tmp2, eCXRegI tmp3, eBXRegI tmp4, eFlagsReg cr)
12657 %{
12658 match(Set result (AryEq ary1 ary2));
12659 effect(TEMP tmp1, TEMP tmp2, USE_KILL ary1, USE_KILL ary2, KILL tmp3, KILL tmp4, KILL cr);
12660 //ins_cost(300);
12662 format %{ "Array Equals $ary1,$ary2 -> $result // KILL $tmp1, $tmp2, $tmp3, $tmp4" %}
12663 ins_encode %{
12664 __ char_arrays_equals(true, $ary1$$Register, $ary2$$Register,
12665 $tmp3$$Register, $result$$Register, $tmp4$$Register,
12666 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12667 %}
12668 ins_pipe( pipe_slow );
12669 %}
12671 //----------Control Flow Instructions------------------------------------------
12672 // Signed compare Instructions
12673 instruct compI_eReg(eFlagsReg cr, eRegI op1, eRegI op2) %{
12674 match(Set cr (CmpI op1 op2));
12675 effect( DEF cr, USE op1, USE op2 );
12676 format %{ "CMP $op1,$op2" %}
12677 opcode(0x3B); /* Opcode 3B /r */
12678 ins_encode( OpcP, RegReg( op1, op2) );
12679 ins_pipe( ialu_cr_reg_reg );
12680 %}
12682 instruct compI_eReg_imm(eFlagsReg cr, eRegI op1, immI op2) %{
12683 match(Set cr (CmpI op1 op2));
12684 effect( DEF cr, USE op1 );
12685 format %{ "CMP $op1,$op2" %}
12686 opcode(0x81,0x07); /* Opcode 81 /7 */
12687 // ins_encode( RegImm( op1, op2) ); /* Was CmpImm */
12688 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12689 ins_pipe( ialu_cr_reg_imm );
12690 %}
12692 // Cisc-spilled version of cmpI_eReg
12693 instruct compI_eReg_mem(eFlagsReg cr, eRegI op1, memory op2) %{
12694 match(Set cr (CmpI op1 (LoadI op2)));
12696 format %{ "CMP $op1,$op2" %}
12697 ins_cost(500);
12698 opcode(0x3B); /* Opcode 3B /r */
12699 ins_encode( OpcP, RegMem( op1, op2) );
12700 ins_pipe( ialu_cr_reg_mem );
12701 %}
12703 instruct testI_reg( eFlagsReg cr, eRegI src, immI0 zero ) %{
12704 match(Set cr (CmpI src zero));
12705 effect( DEF cr, USE src );
12707 format %{ "TEST $src,$src" %}
12708 opcode(0x85);
12709 ins_encode( OpcP, RegReg( src, src ) );
12710 ins_pipe( ialu_cr_reg_imm );
12711 %}
12713 instruct testI_reg_imm( eFlagsReg cr, eRegI src, immI con, immI0 zero ) %{
12714 match(Set cr (CmpI (AndI src con) zero));
12716 format %{ "TEST $src,$con" %}
12717 opcode(0xF7,0x00);
12718 ins_encode( OpcP, RegOpc(src), Con32(con) );
12719 ins_pipe( ialu_cr_reg_imm );
12720 %}
12722 instruct testI_reg_mem( eFlagsReg cr, eRegI src, memory mem, immI0 zero ) %{
12723 match(Set cr (CmpI (AndI src mem) zero));
12725 format %{ "TEST $src,$mem" %}
12726 opcode(0x85);
12727 ins_encode( OpcP, RegMem( src, mem ) );
12728 ins_pipe( ialu_cr_reg_mem );
12729 %}
12731 // Unsigned compare Instructions; really, same as signed except they
12732 // produce an eFlagsRegU instead of eFlagsReg.
12733 instruct compU_eReg(eFlagsRegU cr, eRegI op1, eRegI op2) %{
12734 match(Set cr (CmpU op1 op2));
12736 format %{ "CMPu $op1,$op2" %}
12737 opcode(0x3B); /* Opcode 3B /r */
12738 ins_encode( OpcP, RegReg( op1, op2) );
12739 ins_pipe( ialu_cr_reg_reg );
12740 %}
12742 instruct compU_eReg_imm(eFlagsRegU cr, eRegI op1, immI op2) %{
12743 match(Set cr (CmpU op1 op2));
12745 format %{ "CMPu $op1,$op2" %}
12746 opcode(0x81,0x07); /* Opcode 81 /7 */
12747 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12748 ins_pipe( ialu_cr_reg_imm );
12749 %}
12751 // // Cisc-spilled version of cmpU_eReg
12752 instruct compU_eReg_mem(eFlagsRegU cr, eRegI op1, memory op2) %{
12753 match(Set cr (CmpU op1 (LoadI op2)));
12755 format %{ "CMPu $op1,$op2" %}
12756 ins_cost(500);
12757 opcode(0x3B); /* Opcode 3B /r */
12758 ins_encode( OpcP, RegMem( op1, op2) );
12759 ins_pipe( ialu_cr_reg_mem );
12760 %}
12762 // // Cisc-spilled version of cmpU_eReg
12763 //instruct compU_mem_eReg(eFlagsRegU cr, memory op1, eRegI op2) %{
12764 // match(Set cr (CmpU (LoadI op1) op2));
12765 //
12766 // format %{ "CMPu $op1,$op2" %}
12767 // ins_cost(500);
12768 // opcode(0x39); /* Opcode 39 /r */
12769 // ins_encode( OpcP, RegMem( op1, op2) );
12770 //%}
12772 instruct testU_reg( eFlagsRegU cr, eRegI src, immI0 zero ) %{
12773 match(Set cr (CmpU src zero));
12775 format %{ "TESTu $src,$src" %}
12776 opcode(0x85);
12777 ins_encode( OpcP, RegReg( src, src ) );
12778 ins_pipe( ialu_cr_reg_imm );
12779 %}
12781 // Unsigned pointer compare Instructions
12782 instruct compP_eReg(eFlagsRegU cr, eRegP op1, eRegP op2) %{
12783 match(Set cr (CmpP op1 op2));
12785 format %{ "CMPu $op1,$op2" %}
12786 opcode(0x3B); /* Opcode 3B /r */
12787 ins_encode( OpcP, RegReg( op1, op2) );
12788 ins_pipe( ialu_cr_reg_reg );
12789 %}
12791 instruct compP_eReg_imm(eFlagsRegU cr, eRegP op1, immP op2) %{
12792 match(Set cr (CmpP op1 op2));
12794 format %{ "CMPu $op1,$op2" %}
12795 opcode(0x81,0x07); /* Opcode 81 /7 */
12796 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12797 ins_pipe( ialu_cr_reg_imm );
12798 %}
12800 // // Cisc-spilled version of cmpP_eReg
12801 instruct compP_eReg_mem(eFlagsRegU cr, eRegP op1, memory op2) %{
12802 match(Set cr (CmpP op1 (LoadP op2)));
12804 format %{ "CMPu $op1,$op2" %}
12805 ins_cost(500);
12806 opcode(0x3B); /* Opcode 3B /r */
12807 ins_encode( OpcP, RegMem( op1, op2) );
12808 ins_pipe( ialu_cr_reg_mem );
12809 %}
12811 // // Cisc-spilled version of cmpP_eReg
12812 //instruct compP_mem_eReg(eFlagsRegU cr, memory op1, eRegP op2) %{
12813 // match(Set cr (CmpP (LoadP op1) op2));
12814 //
12815 // format %{ "CMPu $op1,$op2" %}
12816 // ins_cost(500);
12817 // opcode(0x39); /* Opcode 39 /r */
12818 // ins_encode( OpcP, RegMem( op1, op2) );
12819 //%}
12821 // Compare raw pointer (used in out-of-heap check).
12822 // Only works because non-oop pointers must be raw pointers
12823 // and raw pointers have no anti-dependencies.
12824 instruct compP_mem_eReg( eFlagsRegU cr, eRegP op1, memory op2 ) %{
12825 predicate( !n->in(2)->in(2)->bottom_type()->isa_oop_ptr() );
12826 match(Set cr (CmpP op1 (LoadP op2)));
12828 format %{ "CMPu $op1,$op2" %}
12829 opcode(0x3B); /* Opcode 3B /r */
12830 ins_encode( OpcP, RegMem( op1, op2) );
12831 ins_pipe( ialu_cr_reg_mem );
12832 %}
12834 //
12835 // This will generate a signed flags result. This should be ok
12836 // since any compare to a zero should be eq/neq.
12837 instruct testP_reg( eFlagsReg cr, eRegP src, immP0 zero ) %{
12838 match(Set cr (CmpP src zero));
12840 format %{ "TEST $src,$src" %}
12841 opcode(0x85);
12842 ins_encode( OpcP, RegReg( src, src ) );
12843 ins_pipe( ialu_cr_reg_imm );
12844 %}
12846 // Cisc-spilled version of testP_reg
12847 // This will generate a signed flags result. This should be ok
12848 // since any compare to a zero should be eq/neq.
12849 instruct testP_Reg_mem( eFlagsReg cr, memory op, immI0 zero ) %{
12850 match(Set cr (CmpP (LoadP op) zero));
12852 format %{ "TEST $op,0xFFFFFFFF" %}
12853 ins_cost(500);
12854 opcode(0xF7); /* Opcode F7 /0 */
12855 ins_encode( OpcP, RMopc_Mem(0x00,op), Con_d32(0xFFFFFFFF) );
12856 ins_pipe( ialu_cr_reg_imm );
12857 %}
12859 // Yanked all unsigned pointer compare operations.
12860 // Pointer compares are done with CmpP which is already unsigned.
12862 //----------Max and Min--------------------------------------------------------
12863 // Min Instructions
12864 ////
12865 // *** Min and Max using the conditional move are slower than the
12866 // *** branch version on a Pentium III.
12867 // // Conditional move for min
12868 //instruct cmovI_reg_lt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12869 // effect( USE_DEF op2, USE op1, USE cr );
12870 // format %{ "CMOVlt $op2,$op1\t! min" %}
12871 // opcode(0x4C,0x0F);
12872 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12873 // ins_pipe( pipe_cmov_reg );
12874 //%}
12875 //
12876 //// Min Register with Register (P6 version)
12877 //instruct minI_eReg_p6( eRegI op1, eRegI op2 ) %{
12878 // predicate(VM_Version::supports_cmov() );
12879 // match(Set op2 (MinI op1 op2));
12880 // ins_cost(200);
12881 // expand %{
12882 // eFlagsReg cr;
12883 // compI_eReg(cr,op1,op2);
12884 // cmovI_reg_lt(op2,op1,cr);
12885 // %}
12886 //%}
12888 // Min Register with Register (generic version)
12889 instruct minI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12890 match(Set dst (MinI dst src));
12891 effect(KILL flags);
12892 ins_cost(300);
12894 format %{ "MIN $dst,$src" %}
12895 opcode(0xCC);
12896 ins_encode( min_enc(dst,src) );
12897 ins_pipe( pipe_slow );
12898 %}
12900 // Max Register with Register
12901 // *** Min and Max using the conditional move are slower than the
12902 // *** branch version on a Pentium III.
12903 // // Conditional move for max
12904 //instruct cmovI_reg_gt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12905 // effect( USE_DEF op2, USE op1, USE cr );
12906 // format %{ "CMOVgt $op2,$op1\t! max" %}
12907 // opcode(0x4F,0x0F);
12908 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12909 // ins_pipe( pipe_cmov_reg );
12910 //%}
12911 //
12912 // // Max Register with Register (P6 version)
12913 //instruct maxI_eReg_p6( eRegI op1, eRegI op2 ) %{
12914 // predicate(VM_Version::supports_cmov() );
12915 // match(Set op2 (MaxI op1 op2));
12916 // ins_cost(200);
12917 // expand %{
12918 // eFlagsReg cr;
12919 // compI_eReg(cr,op1,op2);
12920 // cmovI_reg_gt(op2,op1,cr);
12921 // %}
12922 //%}
12924 // Max Register with Register (generic version)
12925 instruct maxI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12926 match(Set dst (MaxI dst src));
12927 effect(KILL flags);
12928 ins_cost(300);
12930 format %{ "MAX $dst,$src" %}
12931 opcode(0xCC);
12932 ins_encode( max_enc(dst,src) );
12933 ins_pipe( pipe_slow );
12934 %}
12936 // ============================================================================
12937 // Branch Instructions
12938 // Jump Table
12939 instruct jumpXtnd(eRegI switch_val) %{
12940 match(Jump switch_val);
12941 ins_cost(350);
12943 format %{ "JMP [table_base](,$switch_val,1)\n\t" %}
12945 ins_encode %{
12946 address table_base = __ address_table_constant(_index2label);
12948 // Jump to Address(table_base + switch_reg)
12949 InternalAddress table(table_base);
12950 Address index(noreg, $switch_val$$Register, Address::times_1);
12951 __ jump(ArrayAddress(table, index));
12952 %}
12953 ins_pc_relative(1);
12954 ins_pipe(pipe_jmp);
12955 %}
12957 // Jump Direct - Label defines a relative address from JMP+1
12958 instruct jmpDir(label labl) %{
12959 match(Goto);
12960 effect(USE labl);
12962 ins_cost(300);
12963 format %{ "JMP $labl" %}
12964 size(5);
12965 opcode(0xE9);
12966 ins_encode( OpcP, Lbl( labl ) );
12967 ins_pipe( pipe_jmp );
12968 ins_pc_relative(1);
12969 %}
12971 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12972 instruct jmpCon(cmpOp cop, eFlagsReg cr, label labl) %{
12973 match(If cop cr);
12974 effect(USE labl);
12976 ins_cost(300);
12977 format %{ "J$cop $labl" %}
12978 size(6);
12979 opcode(0x0F, 0x80);
12980 ins_encode( Jcc( cop, labl) );
12981 ins_pipe( pipe_jcc );
12982 ins_pc_relative(1);
12983 %}
12985 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12986 instruct jmpLoopEnd(cmpOp cop, eFlagsReg cr, label labl) %{
12987 match(CountedLoopEnd cop cr);
12988 effect(USE labl);
12990 ins_cost(300);
12991 format %{ "J$cop $labl\t# Loop end" %}
12992 size(6);
12993 opcode(0x0F, 0x80);
12994 ins_encode( Jcc( cop, labl) );
12995 ins_pipe( pipe_jcc );
12996 ins_pc_relative(1);
12997 %}
12999 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13000 instruct jmpLoopEndU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13001 match(CountedLoopEnd cop cmp);
13002 effect(USE labl);
13004 ins_cost(300);
13005 format %{ "J$cop,u $labl\t# Loop end" %}
13006 size(6);
13007 opcode(0x0F, 0x80);
13008 ins_encode( Jcc( cop, labl) );
13009 ins_pipe( pipe_jcc );
13010 ins_pc_relative(1);
13011 %}
13013 instruct jmpLoopEndUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13014 match(CountedLoopEnd cop cmp);
13015 effect(USE labl);
13017 ins_cost(200);
13018 format %{ "J$cop,u $labl\t# Loop end" %}
13019 size(6);
13020 opcode(0x0F, 0x80);
13021 ins_encode( Jcc( cop, labl) );
13022 ins_pipe( pipe_jcc );
13023 ins_pc_relative(1);
13024 %}
13026 // Jump Direct Conditional - using unsigned comparison
13027 instruct jmpConU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13028 match(If cop cmp);
13029 effect(USE labl);
13031 ins_cost(300);
13032 format %{ "J$cop,u $labl" %}
13033 size(6);
13034 opcode(0x0F, 0x80);
13035 ins_encode(Jcc(cop, labl));
13036 ins_pipe(pipe_jcc);
13037 ins_pc_relative(1);
13038 %}
13040 instruct jmpConUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13041 match(If cop cmp);
13042 effect(USE labl);
13044 ins_cost(200);
13045 format %{ "J$cop,u $labl" %}
13046 size(6);
13047 opcode(0x0F, 0x80);
13048 ins_encode(Jcc(cop, labl));
13049 ins_pipe(pipe_jcc);
13050 ins_pc_relative(1);
13051 %}
13053 instruct jmpConUCF2(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
13054 match(If cop cmp);
13055 effect(USE labl);
13057 ins_cost(200);
13058 format %{ $$template
13059 if ($cop$$cmpcode == Assembler::notEqual) {
13060 $$emit$$"JP,u $labl\n\t"
13061 $$emit$$"J$cop,u $labl"
13062 } else {
13063 $$emit$$"JP,u done\n\t"
13064 $$emit$$"J$cop,u $labl\n\t"
13065 $$emit$$"done:"
13066 }
13067 %}
13068 size(12);
13069 opcode(0x0F, 0x80);
13070 ins_encode %{
13071 Label* l = $labl$$label;
13072 $$$emit8$primary;
13073 emit_cc(cbuf, $secondary, Assembler::parity);
13074 int parity_disp = -1;
13075 bool ok = false;
13076 if ($cop$$cmpcode == Assembler::notEqual) {
13077 // the two jumps 6 bytes apart so the jump distances are too
13078 parity_disp = l ? (l->loc_pos() - (cbuf.insts_size() + 4)) : 0;
13079 } else if ($cop$$cmpcode == Assembler::equal) {
13080 parity_disp = 6;
13081 ok = true;
13082 } else {
13083 ShouldNotReachHere();
13084 }
13085 emit_d32(cbuf, parity_disp);
13086 $$$emit8$primary;
13087 emit_cc(cbuf, $secondary, $cop$$cmpcode);
13088 int disp = l ? (l->loc_pos() - (cbuf.insts_size() + 4)) : 0;
13089 emit_d32(cbuf, disp);
13090 %}
13091 ins_pipe(pipe_jcc);
13092 ins_pc_relative(1);
13093 %}
13095 // ============================================================================
13096 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass
13097 // array for an instance of the superklass. Set a hidden internal cache on a
13098 // hit (cache is checked with exposed code in gen_subtype_check()). Return
13099 // NZ for a miss or zero for a hit. The encoding ALSO sets flags.
13100 instruct partialSubtypeCheck( eDIRegP result, eSIRegP sub, eAXRegP super, eCXRegI rcx, eFlagsReg cr ) %{
13101 match(Set result (PartialSubtypeCheck sub super));
13102 effect( KILL rcx, KILL cr );
13104 ins_cost(1100); // slightly larger than the next version
13105 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
13106 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
13107 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
13108 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
13109 "JNE,s miss\t\t# Missed: EDI not-zero\n\t"
13110 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache\n\t"
13111 "XOR $result,$result\t\t Hit: EDI zero\n\t"
13112 "miss:\t" %}
13114 opcode(0x1); // Force a XOR of EDI
13115 ins_encode( enc_PartialSubtypeCheck() );
13116 ins_pipe( pipe_slow );
13117 %}
13119 instruct partialSubtypeCheck_vs_Zero( eFlagsReg cr, eSIRegP sub, eAXRegP super, eCXRegI rcx, eDIRegP result, immP0 zero ) %{
13120 match(Set cr (CmpP (PartialSubtypeCheck sub super) zero));
13121 effect( KILL rcx, KILL result );
13123 ins_cost(1000);
13124 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
13125 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
13126 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
13127 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
13128 "JNE,s miss\t\t# Missed: flags NZ\n\t"
13129 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache, flags Z\n\t"
13130 "miss:\t" %}
13132 opcode(0x0); // No need to XOR EDI
13133 ins_encode( enc_PartialSubtypeCheck() );
13134 ins_pipe( pipe_slow );
13135 %}
13137 // ============================================================================
13138 // Branch Instructions -- short offset versions
13139 //
13140 // These instructions are used to replace jumps of a long offset (the default
13141 // match) with jumps of a shorter offset. These instructions are all tagged
13142 // with the ins_short_branch attribute, which causes the ADLC to suppress the
13143 // match rules in general matching. Instead, the ADLC generates a conversion
13144 // method in the MachNode which can be used to do in-place replacement of the
13145 // long variant with the shorter variant. The compiler will determine if a
13146 // branch can be taken by the is_short_branch_offset() predicate in the machine
13147 // specific code section of the file.
13149 // Jump Direct - Label defines a relative address from JMP+1
13150 instruct jmpDir_short(label labl) %{
13151 match(Goto);
13152 effect(USE labl);
13154 ins_cost(300);
13155 format %{ "JMP,s $labl" %}
13156 size(2);
13157 opcode(0xEB);
13158 ins_encode( OpcP, LblShort( labl ) );
13159 ins_pipe( pipe_jmp );
13160 ins_pc_relative(1);
13161 ins_short_branch(1);
13162 %}
13164 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13165 instruct jmpCon_short(cmpOp cop, eFlagsReg cr, label labl) %{
13166 match(If cop cr);
13167 effect(USE labl);
13169 ins_cost(300);
13170 format %{ "J$cop,s $labl" %}
13171 size(2);
13172 opcode(0x70);
13173 ins_encode( JccShort( cop, labl) );
13174 ins_pipe( pipe_jcc );
13175 ins_pc_relative(1);
13176 ins_short_branch(1);
13177 %}
13179 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13180 instruct jmpLoopEnd_short(cmpOp cop, eFlagsReg cr, label labl) %{
13181 match(CountedLoopEnd cop cr);
13182 effect(USE labl);
13184 ins_cost(300);
13185 format %{ "J$cop,s $labl\t# Loop end" %}
13186 size(2);
13187 opcode(0x70);
13188 ins_encode( JccShort( cop, labl) );
13189 ins_pipe( pipe_jcc );
13190 ins_pc_relative(1);
13191 ins_short_branch(1);
13192 %}
13194 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13195 instruct jmpLoopEndU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13196 match(CountedLoopEnd cop cmp);
13197 effect(USE labl);
13199 ins_cost(300);
13200 format %{ "J$cop,us $labl\t# Loop end" %}
13201 size(2);
13202 opcode(0x70);
13203 ins_encode( JccShort( cop, labl) );
13204 ins_pipe( pipe_jcc );
13205 ins_pc_relative(1);
13206 ins_short_branch(1);
13207 %}
13209 instruct jmpLoopEndUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13210 match(CountedLoopEnd cop cmp);
13211 effect(USE labl);
13213 ins_cost(300);
13214 format %{ "J$cop,us $labl\t# Loop end" %}
13215 size(2);
13216 opcode(0x70);
13217 ins_encode( JccShort( cop, labl) );
13218 ins_pipe( pipe_jcc );
13219 ins_pc_relative(1);
13220 ins_short_branch(1);
13221 %}
13223 // Jump Direct Conditional - using unsigned comparison
13224 instruct jmpConU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13225 match(If cop cmp);
13226 effect(USE labl);
13228 ins_cost(300);
13229 format %{ "J$cop,us $labl" %}
13230 size(2);
13231 opcode(0x70);
13232 ins_encode( JccShort( cop, labl) );
13233 ins_pipe( pipe_jcc );
13234 ins_pc_relative(1);
13235 ins_short_branch(1);
13236 %}
13238 instruct jmpConUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13239 match(If cop cmp);
13240 effect(USE labl);
13242 ins_cost(300);
13243 format %{ "J$cop,us $labl" %}
13244 size(2);
13245 opcode(0x70);
13246 ins_encode( JccShort( cop, labl) );
13247 ins_pipe( pipe_jcc );
13248 ins_pc_relative(1);
13249 ins_short_branch(1);
13250 %}
13252 instruct jmpConUCF2_short(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
13253 match(If cop cmp);
13254 effect(USE labl);
13256 ins_cost(300);
13257 format %{ $$template
13258 if ($cop$$cmpcode == Assembler::notEqual) {
13259 $$emit$$"JP,u,s $labl\n\t"
13260 $$emit$$"J$cop,u,s $labl"
13261 } else {
13262 $$emit$$"JP,u,s done\n\t"
13263 $$emit$$"J$cop,u,s $labl\n\t"
13264 $$emit$$"done:"
13265 }
13266 %}
13267 size(4);
13268 opcode(0x70);
13269 ins_encode %{
13270 Label* l = $labl$$label;
13271 emit_cc(cbuf, $primary, Assembler::parity);
13272 int parity_disp = -1;
13273 if ($cop$$cmpcode == Assembler::notEqual) {
13274 parity_disp = l ? (l->loc_pos() - (cbuf.insts_size() + 1)) : 0;
13275 } else if ($cop$$cmpcode == Assembler::equal) {
13276 parity_disp = 2;
13277 } else {
13278 ShouldNotReachHere();
13279 }
13280 emit_d8(cbuf, parity_disp);
13281 emit_cc(cbuf, $primary, $cop$$cmpcode);
13282 int disp = l ? (l->loc_pos() - (cbuf.insts_size() + 1)) : 0;
13283 emit_d8(cbuf, disp);
13284 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
13285 assert(-128 <= parity_disp && parity_disp <= 127, "Displacement too large for short jmp");
13286 %}
13287 ins_pipe(pipe_jcc);
13288 ins_pc_relative(1);
13289 ins_short_branch(1);
13290 %}
13292 // ============================================================================
13293 // Long Compare
13294 //
13295 // Currently we hold longs in 2 registers. Comparing such values efficiently
13296 // is tricky. The flavor of compare used depends on whether we are testing
13297 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit.
13298 // The GE test is the negated LT test. The LE test can be had by commuting
13299 // the operands (yielding a GE test) and then negating; negate again for the
13300 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the
13301 // NE test is negated from that.
13303 // Due to a shortcoming in the ADLC, it mixes up expressions like:
13304 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the
13305 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections
13306 // are collapsed internally in the ADLC's dfa-gen code. The match for
13307 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the
13308 // foo match ends up with the wrong leaf. One fix is to not match both
13309 // reg-reg and reg-zero forms of long-compare. This is unfortunate because
13310 // both forms beat the trinary form of long-compare and both are very useful
13311 // on Intel which has so few registers.
13313 // Manifest a CmpL result in an integer register. Very painful.
13314 // This is the test to avoid.
13315 instruct cmpL3_reg_reg(eSIRegI dst, eRegL src1, eRegL src2, eFlagsReg flags ) %{
13316 match(Set dst (CmpL3 src1 src2));
13317 effect( KILL flags );
13318 ins_cost(1000);
13319 format %{ "XOR $dst,$dst\n\t"
13320 "CMP $src1.hi,$src2.hi\n\t"
13321 "JLT,s m_one\n\t"
13322 "JGT,s p_one\n\t"
13323 "CMP $src1.lo,$src2.lo\n\t"
13324 "JB,s m_one\n\t"
13325 "JEQ,s done\n"
13326 "p_one:\tINC $dst\n\t"
13327 "JMP,s done\n"
13328 "m_one:\tDEC $dst\n"
13329 "done:" %}
13330 ins_encode %{
13331 Label p_one, m_one, done;
13332 __ xorptr($dst$$Register, $dst$$Register);
13333 __ cmpl(HIGH_FROM_LOW($src1$$Register), HIGH_FROM_LOW($src2$$Register));
13334 __ jccb(Assembler::less, m_one);
13335 __ jccb(Assembler::greater, p_one);
13336 __ cmpl($src1$$Register, $src2$$Register);
13337 __ jccb(Assembler::below, m_one);
13338 __ jccb(Assembler::equal, done);
13339 __ bind(p_one);
13340 __ incrementl($dst$$Register);
13341 __ jmpb(done);
13342 __ bind(m_one);
13343 __ decrementl($dst$$Register);
13344 __ bind(done);
13345 %}
13346 ins_pipe( pipe_slow );
13347 %}
13349 //======
13350 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13351 // compares. Can be used for LE or GT compares by reversing arguments.
13352 // NOT GOOD FOR EQ/NE tests.
13353 instruct cmpL_zero_flags_LTGE( flagsReg_long_LTGE flags, eRegL src, immL0 zero ) %{
13354 match( Set flags (CmpL src zero ));
13355 ins_cost(100);
13356 format %{ "TEST $src.hi,$src.hi" %}
13357 opcode(0x85);
13358 ins_encode( OpcP, RegReg_Hi2( src, src ) );
13359 ins_pipe( ialu_cr_reg_reg );
13360 %}
13362 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13363 // compares. Can be used for LE or GT compares by reversing arguments.
13364 // NOT GOOD FOR EQ/NE tests.
13365 instruct cmpL_reg_flags_LTGE( flagsReg_long_LTGE flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13366 match( Set flags (CmpL src1 src2 ));
13367 effect( TEMP tmp );
13368 ins_cost(300);
13369 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13370 "MOV $tmp,$src1.hi\n\t"
13371 "SBB $tmp,$src2.hi\t! Compute flags for long compare" %}
13372 ins_encode( long_cmp_flags2( src1, src2, tmp ) );
13373 ins_pipe( ialu_cr_reg_reg );
13374 %}
13376 // Long compares reg < zero/req OR reg >= zero/req.
13377 // Just a wrapper for a normal branch, plus the predicate test.
13378 instruct cmpL_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, label labl) %{
13379 match(If cmp flags);
13380 effect(USE labl);
13381 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13382 expand %{
13383 jmpCon(cmp,flags,labl); // JLT or JGE...
13384 %}
13385 %}
13387 // Compare 2 longs and CMOVE longs.
13388 instruct cmovLL_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, eRegL src) %{
13389 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13390 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13391 ins_cost(400);
13392 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13393 "CMOV$cmp $dst.hi,$src.hi" %}
13394 opcode(0x0F,0x40);
13395 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13396 ins_pipe( pipe_cmov_reg_long );
13397 %}
13399 instruct cmovLL_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, load_long_memory src) %{
13400 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13401 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13402 ins_cost(500);
13403 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13404 "CMOV$cmp $dst.hi,$src.hi" %}
13405 opcode(0x0F,0x40);
13406 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13407 ins_pipe( pipe_cmov_reg_long );
13408 %}
13410 // Compare 2 longs and CMOVE ints.
13411 instruct cmovII_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, eRegI src) %{
13412 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13413 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13414 ins_cost(200);
13415 format %{ "CMOV$cmp $dst,$src" %}
13416 opcode(0x0F,0x40);
13417 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13418 ins_pipe( pipe_cmov_reg );
13419 %}
13421 instruct cmovII_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, memory src) %{
13422 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13423 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13424 ins_cost(250);
13425 format %{ "CMOV$cmp $dst,$src" %}
13426 opcode(0x0F,0x40);
13427 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13428 ins_pipe( pipe_cmov_mem );
13429 %}
13431 // Compare 2 longs and CMOVE ints.
13432 instruct cmovPP_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegP dst, eRegP src) %{
13433 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13434 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13435 ins_cost(200);
13436 format %{ "CMOV$cmp $dst,$src" %}
13437 opcode(0x0F,0x40);
13438 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13439 ins_pipe( pipe_cmov_reg );
13440 %}
13442 // Compare 2 longs and CMOVE doubles
13443 instruct cmovDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regD dst, regD src) %{
13444 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13445 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13446 ins_cost(200);
13447 expand %{
13448 fcmovD_regS(cmp,flags,dst,src);
13449 %}
13450 %}
13452 // Compare 2 longs and CMOVE doubles
13453 instruct cmovXDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regXD dst, regXD src) %{
13454 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13455 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13456 ins_cost(200);
13457 expand %{
13458 fcmovXD_regS(cmp,flags,dst,src);
13459 %}
13460 %}
13462 instruct cmovFF_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regF dst, regF src) %{
13463 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13464 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13465 ins_cost(200);
13466 expand %{
13467 fcmovF_regS(cmp,flags,dst,src);
13468 %}
13469 %}
13471 instruct cmovXX_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regX dst, regX src) %{
13472 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13473 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13474 ins_cost(200);
13475 expand %{
13476 fcmovX_regS(cmp,flags,dst,src);
13477 %}
13478 %}
13480 //======
13481 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13482 instruct cmpL_zero_flags_EQNE( flagsReg_long_EQNE flags, eRegL src, immL0 zero, eRegI tmp ) %{
13483 match( Set flags (CmpL src zero ));
13484 effect(TEMP tmp);
13485 ins_cost(200);
13486 format %{ "MOV $tmp,$src.lo\n\t"
13487 "OR $tmp,$src.hi\t! Long is EQ/NE 0?" %}
13488 ins_encode( long_cmp_flags0( src, tmp ) );
13489 ins_pipe( ialu_reg_reg_long );
13490 %}
13492 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13493 instruct cmpL_reg_flags_EQNE( flagsReg_long_EQNE flags, eRegL src1, eRegL src2 ) %{
13494 match( Set flags (CmpL src1 src2 ));
13495 ins_cost(200+300);
13496 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13497 "JNE,s skip\n\t"
13498 "CMP $src1.hi,$src2.hi\n\t"
13499 "skip:\t" %}
13500 ins_encode( long_cmp_flags1( src1, src2 ) );
13501 ins_pipe( ialu_cr_reg_reg );
13502 %}
13504 // Long compare reg == zero/reg OR reg != zero/reg
13505 // Just a wrapper for a normal branch, plus the predicate test.
13506 instruct cmpL_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, label labl) %{
13507 match(If cmp flags);
13508 effect(USE labl);
13509 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13510 expand %{
13511 jmpCon(cmp,flags,labl); // JEQ or JNE...
13512 %}
13513 %}
13515 // Compare 2 longs and CMOVE longs.
13516 instruct cmovLL_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, eRegL src) %{
13517 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13518 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13519 ins_cost(400);
13520 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13521 "CMOV$cmp $dst.hi,$src.hi" %}
13522 opcode(0x0F,0x40);
13523 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13524 ins_pipe( pipe_cmov_reg_long );
13525 %}
13527 instruct cmovLL_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, load_long_memory src) %{
13528 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13529 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13530 ins_cost(500);
13531 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13532 "CMOV$cmp $dst.hi,$src.hi" %}
13533 opcode(0x0F,0x40);
13534 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13535 ins_pipe( pipe_cmov_reg_long );
13536 %}
13538 // Compare 2 longs and CMOVE ints.
13539 instruct cmovII_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, eRegI src) %{
13540 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13541 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13542 ins_cost(200);
13543 format %{ "CMOV$cmp $dst,$src" %}
13544 opcode(0x0F,0x40);
13545 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13546 ins_pipe( pipe_cmov_reg );
13547 %}
13549 instruct cmovII_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, memory src) %{
13550 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13551 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13552 ins_cost(250);
13553 format %{ "CMOV$cmp $dst,$src" %}
13554 opcode(0x0F,0x40);
13555 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13556 ins_pipe( pipe_cmov_mem );
13557 %}
13559 // Compare 2 longs and CMOVE ints.
13560 instruct cmovPP_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegP dst, eRegP src) %{
13561 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13562 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13563 ins_cost(200);
13564 format %{ "CMOV$cmp $dst,$src" %}
13565 opcode(0x0F,0x40);
13566 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13567 ins_pipe( pipe_cmov_reg );
13568 %}
13570 // Compare 2 longs and CMOVE doubles
13571 instruct cmovDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regD dst, regD src) %{
13572 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13573 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13574 ins_cost(200);
13575 expand %{
13576 fcmovD_regS(cmp,flags,dst,src);
13577 %}
13578 %}
13580 // Compare 2 longs and CMOVE doubles
13581 instruct cmovXDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regXD dst, regXD src) %{
13582 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13583 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13584 ins_cost(200);
13585 expand %{
13586 fcmovXD_regS(cmp,flags,dst,src);
13587 %}
13588 %}
13590 instruct cmovFF_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regF dst, regF src) %{
13591 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13592 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13593 ins_cost(200);
13594 expand %{
13595 fcmovF_regS(cmp,flags,dst,src);
13596 %}
13597 %}
13599 instruct cmovXX_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regX dst, regX src) %{
13600 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13601 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13602 ins_cost(200);
13603 expand %{
13604 fcmovX_regS(cmp,flags,dst,src);
13605 %}
13606 %}
13608 //======
13609 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13610 // Same as cmpL_reg_flags_LEGT except must negate src
13611 instruct cmpL_zero_flags_LEGT( flagsReg_long_LEGT flags, eRegL src, immL0 zero, eRegI tmp ) %{
13612 match( Set flags (CmpL src zero ));
13613 effect( TEMP tmp );
13614 ins_cost(300);
13615 format %{ "XOR $tmp,$tmp\t# Long compare for -$src < 0, use commuted test\n\t"
13616 "CMP $tmp,$src.lo\n\t"
13617 "SBB $tmp,$src.hi\n\t" %}
13618 ins_encode( long_cmp_flags3(src, tmp) );
13619 ins_pipe( ialu_reg_reg_long );
13620 %}
13622 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13623 // Same as cmpL_reg_flags_LTGE except operands swapped. Swapping operands
13624 // requires a commuted test to get the same result.
13625 instruct cmpL_reg_flags_LEGT( flagsReg_long_LEGT flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13626 match( Set flags (CmpL src1 src2 ));
13627 effect( TEMP tmp );
13628 ins_cost(300);
13629 format %{ "CMP $src2.lo,$src1.lo\t! Long compare, swapped operands, use with commuted test\n\t"
13630 "MOV $tmp,$src2.hi\n\t"
13631 "SBB $tmp,$src1.hi\t! Compute flags for long compare" %}
13632 ins_encode( long_cmp_flags2( src2, src1, tmp ) );
13633 ins_pipe( ialu_cr_reg_reg );
13634 %}
13636 // Long compares reg < zero/req OR reg >= zero/req.
13637 // Just a wrapper for a normal branch, plus the predicate test
13638 instruct cmpL_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, label labl) %{
13639 match(If cmp flags);
13640 effect(USE labl);
13641 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le );
13642 ins_cost(300);
13643 expand %{
13644 jmpCon(cmp,flags,labl); // JGT or JLE...
13645 %}
13646 %}
13648 // Compare 2 longs and CMOVE longs.
13649 instruct cmovLL_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, eRegL src) %{
13650 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13651 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13652 ins_cost(400);
13653 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13654 "CMOV$cmp $dst.hi,$src.hi" %}
13655 opcode(0x0F,0x40);
13656 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13657 ins_pipe( pipe_cmov_reg_long );
13658 %}
13660 instruct cmovLL_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, load_long_memory src) %{
13661 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13662 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13663 ins_cost(500);
13664 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13665 "CMOV$cmp $dst.hi,$src.hi+4" %}
13666 opcode(0x0F,0x40);
13667 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13668 ins_pipe( pipe_cmov_reg_long );
13669 %}
13671 // Compare 2 longs and CMOVE ints.
13672 instruct cmovII_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, eRegI src) %{
13673 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13674 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13675 ins_cost(200);
13676 format %{ "CMOV$cmp $dst,$src" %}
13677 opcode(0x0F,0x40);
13678 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13679 ins_pipe( pipe_cmov_reg );
13680 %}
13682 instruct cmovII_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, memory src) %{
13683 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13684 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13685 ins_cost(250);
13686 format %{ "CMOV$cmp $dst,$src" %}
13687 opcode(0x0F,0x40);
13688 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13689 ins_pipe( pipe_cmov_mem );
13690 %}
13692 // Compare 2 longs and CMOVE ptrs.
13693 instruct cmovPP_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegP dst, eRegP src) %{
13694 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13695 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13696 ins_cost(200);
13697 format %{ "CMOV$cmp $dst,$src" %}
13698 opcode(0x0F,0x40);
13699 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13700 ins_pipe( pipe_cmov_reg );
13701 %}
13703 // Compare 2 longs and CMOVE doubles
13704 instruct cmovDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regD dst, regD src) %{
13705 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13706 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13707 ins_cost(200);
13708 expand %{
13709 fcmovD_regS(cmp,flags,dst,src);
13710 %}
13711 %}
13713 // Compare 2 longs and CMOVE doubles
13714 instruct cmovXDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regXD dst, regXD src) %{
13715 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13716 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13717 ins_cost(200);
13718 expand %{
13719 fcmovXD_regS(cmp,flags,dst,src);
13720 %}
13721 %}
13723 instruct cmovFF_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regF dst, regF src) %{
13724 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13725 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13726 ins_cost(200);
13727 expand %{
13728 fcmovF_regS(cmp,flags,dst,src);
13729 %}
13730 %}
13733 instruct cmovXX_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regX dst, regX src) %{
13734 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13735 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13736 ins_cost(200);
13737 expand %{
13738 fcmovX_regS(cmp,flags,dst,src);
13739 %}
13740 %}
13743 // ============================================================================
13744 // Procedure Call/Return Instructions
13745 // Call Java Static Instruction
13746 // Note: If this code changes, the corresponding ret_addr_offset() and
13747 // compute_padding() functions will have to be adjusted.
13748 instruct CallStaticJavaDirect(method meth) %{
13749 match(CallStaticJava);
13750 predicate(! ((CallStaticJavaNode*)n)->is_method_handle_invoke());
13751 effect(USE meth);
13753 ins_cost(300);
13754 format %{ "CALL,static " %}
13755 opcode(0xE8); /* E8 cd */
13756 ins_encode( pre_call_FPU,
13757 Java_Static_Call( meth ),
13758 call_epilog,
13759 post_call_FPU );
13760 ins_pipe( pipe_slow );
13761 ins_pc_relative(1);
13762 ins_alignment(4);
13763 %}
13765 // Call Java Static Instruction (method handle version)
13766 // Note: If this code changes, the corresponding ret_addr_offset() and
13767 // compute_padding() functions will have to be adjusted.
13768 instruct CallStaticJavaHandle(method meth, eBPRegP ebp_mh_SP_save) %{
13769 match(CallStaticJava);
13770 predicate(((CallStaticJavaNode*)n)->is_method_handle_invoke());
13771 effect(USE meth);
13772 // EBP is saved by all callees (for interpreter stack correction).
13773 // We use it here for a similar purpose, in {preserve,restore}_SP.
13775 ins_cost(300);
13776 format %{ "CALL,static/MethodHandle " %}
13777 opcode(0xE8); /* E8 cd */
13778 ins_encode( pre_call_FPU,
13779 preserve_SP,
13780 Java_Static_Call( meth ),
13781 restore_SP,
13782 call_epilog,
13783 post_call_FPU );
13784 ins_pipe( pipe_slow );
13785 ins_pc_relative(1);
13786 ins_alignment(4);
13787 %}
13789 // Call Java Dynamic Instruction
13790 // Note: If this code changes, the corresponding ret_addr_offset() and
13791 // compute_padding() functions will have to be adjusted.
13792 instruct CallDynamicJavaDirect(method meth) %{
13793 match(CallDynamicJava);
13794 effect(USE meth);
13796 ins_cost(300);
13797 format %{ "MOV EAX,(oop)-1\n\t"
13798 "CALL,dynamic" %}
13799 opcode(0xE8); /* E8 cd */
13800 ins_encode( pre_call_FPU,
13801 Java_Dynamic_Call( meth ),
13802 call_epilog,
13803 post_call_FPU );
13804 ins_pipe( pipe_slow );
13805 ins_pc_relative(1);
13806 ins_alignment(4);
13807 %}
13809 // Call Runtime Instruction
13810 instruct CallRuntimeDirect(method meth) %{
13811 match(CallRuntime );
13812 effect(USE meth);
13814 ins_cost(300);
13815 format %{ "CALL,runtime " %}
13816 opcode(0xE8); /* E8 cd */
13817 // Use FFREEs to clear entries in float stack
13818 ins_encode( pre_call_FPU,
13819 FFree_Float_Stack_All,
13820 Java_To_Runtime( meth ),
13821 post_call_FPU );
13822 ins_pipe( pipe_slow );
13823 ins_pc_relative(1);
13824 %}
13826 // Call runtime without safepoint
13827 instruct CallLeafDirect(method meth) %{
13828 match(CallLeaf);
13829 effect(USE meth);
13831 ins_cost(300);
13832 format %{ "CALL_LEAF,runtime " %}
13833 opcode(0xE8); /* E8 cd */
13834 ins_encode( pre_call_FPU,
13835 FFree_Float_Stack_All,
13836 Java_To_Runtime( meth ),
13837 Verify_FPU_For_Leaf, post_call_FPU );
13838 ins_pipe( pipe_slow );
13839 ins_pc_relative(1);
13840 %}
13842 instruct CallLeafNoFPDirect(method meth) %{
13843 match(CallLeafNoFP);
13844 effect(USE meth);
13846 ins_cost(300);
13847 format %{ "CALL_LEAF_NOFP,runtime " %}
13848 opcode(0xE8); /* E8 cd */
13849 ins_encode(Java_To_Runtime(meth));
13850 ins_pipe( pipe_slow );
13851 ins_pc_relative(1);
13852 %}
13855 // Return Instruction
13856 // Remove the return address & jump to it.
13857 instruct Ret() %{
13858 match(Return);
13859 format %{ "RET" %}
13860 opcode(0xC3);
13861 ins_encode(OpcP);
13862 ins_pipe( pipe_jmp );
13863 %}
13865 // Tail Call; Jump from runtime stub to Java code.
13866 // Also known as an 'interprocedural jump'.
13867 // Target of jump will eventually return to caller.
13868 // TailJump below removes the return address.
13869 instruct TailCalljmpInd(eRegP_no_EBP jump_target, eBXRegP method_oop) %{
13870 match(TailCall jump_target method_oop );
13871 ins_cost(300);
13872 format %{ "JMP $jump_target \t# EBX holds method oop" %}
13873 opcode(0xFF, 0x4); /* Opcode FF /4 */
13874 ins_encode( OpcP, RegOpc(jump_target) );
13875 ins_pipe( pipe_jmp );
13876 %}
13879 // Tail Jump; remove the return address; jump to target.
13880 // TailCall above leaves the return address around.
13881 instruct tailjmpInd(eRegP_no_EBP jump_target, eAXRegP ex_oop) %{
13882 match( TailJump jump_target ex_oop );
13883 ins_cost(300);
13884 format %{ "POP EDX\t# pop return address into dummy\n\t"
13885 "JMP $jump_target " %}
13886 opcode(0xFF, 0x4); /* Opcode FF /4 */
13887 ins_encode( enc_pop_rdx,
13888 OpcP, RegOpc(jump_target) );
13889 ins_pipe( pipe_jmp );
13890 %}
13892 // Create exception oop: created by stack-crawling runtime code.
13893 // Created exception is now available to this handler, and is setup
13894 // just prior to jumping to this handler. No code emitted.
13895 instruct CreateException( eAXRegP ex_oop )
13896 %{
13897 match(Set ex_oop (CreateEx));
13899 size(0);
13900 // use the following format syntax
13901 format %{ "# exception oop is in EAX; no code emitted" %}
13902 ins_encode();
13903 ins_pipe( empty );
13904 %}
13907 // Rethrow exception:
13908 // The exception oop will come in the first argument position.
13909 // Then JUMP (not call) to the rethrow stub code.
13910 instruct RethrowException()
13911 %{
13912 match(Rethrow);
13914 // use the following format syntax
13915 format %{ "JMP rethrow_stub" %}
13916 ins_encode(enc_rethrow);
13917 ins_pipe( pipe_jmp );
13918 %}
13920 // inlined locking and unlocking
13923 instruct cmpFastLock( eFlagsReg cr, eRegP object, eRegP box, eAXRegI tmp, eRegP scr) %{
13924 match( Set cr (FastLock object box) );
13925 effect( TEMP tmp, TEMP scr );
13926 ins_cost(300);
13927 format %{ "FASTLOCK $object, $box KILLS $tmp,$scr" %}
13928 ins_encode( Fast_Lock(object,box,tmp,scr) );
13929 ins_pipe( pipe_slow );
13930 ins_pc_relative(1);
13931 %}
13933 instruct cmpFastUnlock( eFlagsReg cr, eRegP object, eAXRegP box, eRegP tmp ) %{
13934 match( Set cr (FastUnlock object box) );
13935 effect( TEMP tmp );
13936 ins_cost(300);
13937 format %{ "FASTUNLOCK $object, $box, $tmp" %}
13938 ins_encode( Fast_Unlock(object,box,tmp) );
13939 ins_pipe( pipe_slow );
13940 ins_pc_relative(1);
13941 %}
13945 // ============================================================================
13946 // Safepoint Instruction
13947 instruct safePoint_poll(eFlagsReg cr) %{
13948 match(SafePoint);
13949 effect(KILL cr);
13951 // TODO-FIXME: we currently poll at offset 0 of the safepoint polling page.
13952 // On SPARC that might be acceptable as we can generate the address with
13953 // just a sethi, saving an or. By polling at offset 0 we can end up
13954 // putting additional pressure on the index-0 in the D$. Because of
13955 // alignment (just like the situation at hand) the lower indices tend
13956 // to see more traffic. It'd be better to change the polling address
13957 // to offset 0 of the last $line in the polling page.
13959 format %{ "TSTL #polladdr,EAX\t! Safepoint: poll for GC" %}
13960 ins_cost(125);
13961 size(6) ;
13962 ins_encode( Safepoint_Poll() );
13963 ins_pipe( ialu_reg_mem );
13964 %}
13966 //----------PEEPHOLE RULES-----------------------------------------------------
13967 // These must follow all instruction definitions as they use the names
13968 // defined in the instructions definitions.
13969 //
13970 // peepmatch ( root_instr_name [preceding_instruction]* );
13971 //
13972 // peepconstraint %{
13973 // (instruction_number.operand_name relational_op instruction_number.operand_name
13974 // [, ...] );
13975 // // instruction numbers are zero-based using left to right order in peepmatch
13976 //
13977 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) );
13978 // // provide an instruction_number.operand_name for each operand that appears
13979 // // in the replacement instruction's match rule
13980 //
13981 // ---------VM FLAGS---------------------------------------------------------
13982 //
13983 // All peephole optimizations can be turned off using -XX:-OptoPeephole
13984 //
13985 // Each peephole rule is given an identifying number starting with zero and
13986 // increasing by one in the order seen by the parser. An individual peephole
13987 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=#
13988 // on the command-line.
13989 //
13990 // ---------CURRENT LIMITATIONS----------------------------------------------
13991 //
13992 // Only match adjacent instructions in same basic block
13993 // Only equality constraints
13994 // Only constraints between operands, not (0.dest_reg == EAX_enc)
13995 // Only one replacement instruction
13996 //
13997 // ---------EXAMPLE----------------------------------------------------------
13998 //
13999 // // pertinent parts of existing instructions in architecture description
14000 // instruct movI(eRegI dst, eRegI src) %{
14001 // match(Set dst (CopyI src));
14002 // %}
14003 //
14004 // instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
14005 // match(Set dst (AddI dst src));
14006 // effect(KILL cr);
14007 // %}
14008 //
14009 // // Change (inc mov) to lea
14010 // peephole %{
14011 // // increment preceeded by register-register move
14012 // peepmatch ( incI_eReg movI );
14013 // // require that the destination register of the increment
14014 // // match the destination register of the move
14015 // peepconstraint ( 0.dst == 1.dst );
14016 // // construct a replacement instruction that sets
14017 // // the destination to ( move's source register + one )
14018 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14019 // %}
14020 //
14021 // Implementation no longer uses movX instructions since
14022 // machine-independent system no longer uses CopyX nodes.
14023 //
14024 // peephole %{
14025 // peepmatch ( incI_eReg movI );
14026 // peepconstraint ( 0.dst == 1.dst );
14027 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14028 // %}
14029 //
14030 // peephole %{
14031 // peepmatch ( decI_eReg movI );
14032 // peepconstraint ( 0.dst == 1.dst );
14033 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14034 // %}
14035 //
14036 // peephole %{
14037 // peepmatch ( addI_eReg_imm movI );
14038 // peepconstraint ( 0.dst == 1.dst );
14039 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14040 // %}
14041 //
14042 // peephole %{
14043 // peepmatch ( addP_eReg_imm movP );
14044 // peepconstraint ( 0.dst == 1.dst );
14045 // peepreplace ( leaP_eReg_immI( 0.dst 1.src 0.src ) );
14046 // %}
14048 // // Change load of spilled value to only a spill
14049 // instruct storeI(memory mem, eRegI src) %{
14050 // match(Set mem (StoreI mem src));
14051 // %}
14052 //
14053 // instruct loadI(eRegI dst, memory mem) %{
14054 // match(Set dst (LoadI mem));
14055 // %}
14056 //
14057 peephole %{
14058 peepmatch ( loadI storeI );
14059 peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem );
14060 peepreplace ( storeI( 1.mem 1.mem 1.src ) );
14061 %}
14063 //----------SMARTSPILL RULES---------------------------------------------------
14064 // These must follow all instruction definitions as they use the names
14065 // defined in the instructions definitions.