jdk8-mips64-public/hotspot: src/cpu/x86/vm/sharedRuntime_x86

src/cpu/x86/vm/sharedRuntime_x86_64.cpp@70aa912cebe5 (annotated)

src/cpu/x86/vm/sharedRuntime_x86_64.cpp

Wed, 15 Apr 2020 11:49:55 +0800

author: aoqi
date: Wed, 15 Apr 2020 11:49:55 +0800
changeset 9852: 70aa912cebe5
parent 9703: 2fdf635bcf28
parent 9844: 6a809b1ac0a8
permissions: -rw-r--r--

Merge

 /*
  * Copyright (c) 2003, 2017, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 only, as
  * published by the Free Software Foundation.
  *
  * This code is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * version 2 for more details (a copy is included in the LICENSE file that
  * accompanied this code).
  *
  * You should have received a copy of the GNU General Public License version
  * 2 along with this work; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  * or visit www.oracle.com if you need additional information or have any
  * questions.
  *
  */
 #include "precompiled.hpp"
 #ifndef _WINDOWS
 #include "alloca.h"
 #endif
 #include "asm/macroAssembler.hpp"
 #include "asm/macroAssembler.inline.hpp"
 #include "code/debugInfoRec.hpp"
 #include "code/icBuffer.hpp"
 #include "code/vtableStubs.hpp"
 #include "interpreter/interpreter.hpp"
 #include "oops/compiledICHolder.hpp"
 #include "prims/jvmtiRedefineClassesTrace.hpp"
 #include "runtime/sharedRuntime.hpp"
 #include "runtime/vframeArray.hpp"
 #include "vmreg_x86.inline.hpp"
 #ifdef COMPILER1
 #include "c1/c1_Runtime1.hpp"
 #endif
 #ifdef COMPILER2
 #include "opto/runtime.hpp"
 #endif
 #define __ masm->
 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;
 class SimpleRuntimeFrame {
   public:
   // Most of the runtime stubs have this simple frame layout.
   // This class exists to make the layout shared in one place.
   // Offsets are for compiler stack slots, which are jints.
   enum layout {
     // The frame sender code expects that rbp will be in the "natural" place and
     // will override any oopMap setting for it. We must therefore force the layout
     // so that it agrees with the frame sender code.
     rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,
     rbp_off2,
     return_off, return_off2,
     framesize
   };
 };
 class RegisterSaver {
   // Capture info about frame layout.  Layout offsets are in jint
   // units because compiler frame slots are jints.
 #define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off
   enum layout {
     fpu_state_off = frame::arg_reg_save_area_bytes/BytesPerInt, // fxsave save area
     xmm_off       = fpu_state_off + 160/BytesPerInt,            // offset in fxsave save area
     DEF_XMM_OFFS(0),
     DEF_XMM_OFFS(1),
     DEF_XMM_OFFS(2),
     DEF_XMM_OFFS(3),
     DEF_XMM_OFFS(4),
     DEF_XMM_OFFS(5),
     DEF_XMM_OFFS(6),
     DEF_XMM_OFFS(7),
     DEF_XMM_OFFS(8),
     DEF_XMM_OFFS(9),
     DEF_XMM_OFFS(10),
     DEF_XMM_OFFS(11),
     DEF_XMM_OFFS(12),
     DEF_XMM_OFFS(13),
     DEF_XMM_OFFS(14),
     DEF_XMM_OFFS(15),
     fpu_state_end = fpu_state_off + ((FPUStateSizeInWords-1)*wordSize / BytesPerInt),
     fpu_stateH_end,
     r15_off, r15H_off,
     r14_off, r14H_off,
     r13_off, r13H_off,
     r12_off, r12H_off,
     r11_off, r11H_off,
     r10_off, r10H_off,
     r9_off,  r9H_off,
     r8_off,  r8H_off,
     rdi_off, rdiH_off,
     rsi_off, rsiH_off,
     ignore_off, ignoreH_off,  // extra copy of rbp
     rsp_off, rspH_off,
     rbx_off, rbxH_off,
     rdx_off, rdxH_off,
     rcx_off, rcxH_off,
     rax_off, raxH_off,
     // 16-byte stack alignment fill word: see MacroAssembler::push/pop_IU_state
     align_off, alignH_off,
     flags_off, flagsH_off,
     // The frame sender code expects that rbp will be in the "natural" place and
     // will override any oopMap setting for it. We must therefore force the layout
     // so that it agrees with the frame sender code.
     rbp_off, rbpH_off,        // copy of rbp we will restore
     return_off, returnH_off,  // slot for return address
     reg_save_size             // size in compiler stack slots
   };
  public:
   static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors = false);
   static void restore_live_registers(MacroAssembler* masm, bool restore_vectors = false);
   // Offsets into the register save area
   // Used by deoptimization when it is managing result register
   // values on its own
   static int rax_offset_in_bytes(void)    { return BytesPerInt * rax_off; }
   static int rdx_offset_in_bytes(void)    { return BytesPerInt * rdx_off; }
   static int rbx_offset_in_bytes(void)    { return BytesPerInt * rbx_off; }
   static int xmm0_offset_in_bytes(void)   { return BytesPerInt * xmm0_off; }
   static int return_offset_in_bytes(void) { return BytesPerInt * return_off; }
   // During deoptimization only the result registers need to be restored,
   // all the other values have already been extracted.
   static void restore_result_registers(MacroAssembler* masm);
 };
 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors) {
   int vect_words = 0;
 #ifdef COMPILER2
   if (save_vectors) {
     assert(UseAVX > 0, "256bit vectors are supported only with AVX");
     assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
     // Save upper half of YMM registes
     vect_words = 16 * 16 / wordSize;
     additional_frame_words += vect_words;
   }
 #else
   assert(!save_vectors, "vectors are generated only by C2");
 #endif
   // Always make the frame size 16-byte aligned
   int frame_size_in_bytes = round_to(additional_frame_words*wordSize +
                                      reg_save_size*BytesPerInt, 16);
   // OopMap frame size is in compiler stack slots (jint's) not bytes or words
   int frame_size_in_slots = frame_size_in_bytes / BytesPerInt;
   // The caller will allocate additional_frame_words
   int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt;
   // CodeBlob frame size is in words.
   int frame_size_in_words = frame_size_in_bytes / wordSize;
   *total_frame_words = frame_size_in_words;
   // Save registers, fpu state, and flags.
   // We assume caller has already pushed the return address onto the
   // stack, so rsp is 8-byte aligned here.
   // We push rpb twice in this sequence because we want the real rbp
   // to be under the return like a normal enter.
   __ enter();          // rsp becomes 16-byte aligned here
   __ push_CPU_state(); // Push a multiple of 16 bytes
   if (vect_words > 0) {
     assert(vect_words*wordSize == 256, "");
     __ subptr(rsp, 256); // Save upper half of YMM registes
     __ vextractf128h(Address(rsp,  0),xmm0);
     __ vextractf128h(Address(rsp, 16),xmm1);
     __ vextractf128h(Address(rsp, 32),xmm2);
     __ vextractf128h(Address(rsp, 48),xmm3);
     __ vextractf128h(Address(rsp, 64),xmm4);
     __ vextractf128h(Address(rsp, 80),xmm5);
     __ vextractf128h(Address(rsp, 96),xmm6);
     __ vextractf128h(Address(rsp,112),xmm7);
     __ vextractf128h(Address(rsp,128),xmm8);
     __ vextractf128h(Address(rsp,144),xmm9);
     __ vextractf128h(Address(rsp,160),xmm10);
     __ vextractf128h(Address(rsp,176),xmm11);
     __ vextractf128h(Address(rsp,192),xmm12);
     __ vextractf128h(Address(rsp,208),xmm13);
     __ vextractf128h(Address(rsp,224),xmm14);
     __ vextractf128h(Address(rsp,240),xmm15);
   }
   if (frame::arg_reg_save_area_bytes != 0) {
     // Allocate argument register save area
     __ subptr(rsp, frame::arg_reg_save_area_bytes);
   }
   // Set an oopmap for the call site.  This oopmap will map all
   // oop-registers and debug-info registers as callee-saved.  This
   // will allow deoptimization at this safepoint to find all possible
   // debug-info recordings, as well as let GC find all oops.
   OopMapSet *oop_maps = new OopMapSet();
   OopMap* map = new OopMap(frame_size_in_slots, 0);
 #define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_slots)
   map->set_callee_saved(STACK_OFFSET( rax_off ), rax->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( rcx_off ), rcx->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( rdx_off ), rdx->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( rbx_off ), rbx->as_VMReg());
   // rbp location is known implicitly by the frame sender code, needs no oopmap
   // and the location where rbp was saved by is ignored
   map->set_callee_saved(STACK_OFFSET( rsi_off ), rsi->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( rdi_off ), rdi->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r8_off  ), r8->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r9_off  ), r9->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r10_off ), r10->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r11_off ), r11->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r12_off ), r12->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r13_off ), r13->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r14_off ), r14->as_VMReg());
   map->set_callee_saved(STACK_OFFSET( r15_off ), r15->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm0_off ), xmm0->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm1_off ), xmm1->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm2_off ), xmm2->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm3_off ), xmm3->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm4_off ), xmm4->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm5_off ), xmm5->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm6_off ), xmm6->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm7_off ), xmm7->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm8_off ), xmm8->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm9_off ), xmm9->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm10_off), xmm10->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm11_off), xmm11->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm12_off), xmm12->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm13_off), xmm13->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm14_off), xmm14->as_VMReg());
   map->set_callee_saved(STACK_OFFSET(xmm15_off), xmm15->as_VMReg());
   // %%% These should all be a waste but we'll keep things as they were for now
   if (true) {
     map->set_callee_saved(STACK_OFFSET( raxH_off ), rax->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( rcxH_off ), rcx->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( rdxH_off ), rdx->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( rbxH_off ), rbx->as_VMReg()->next());
     // rbp location is known implicitly by the frame sender code, needs no oopmap
     map->set_callee_saved(STACK_OFFSET( rsiH_off ), rsi->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( rdiH_off ), rdi->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r8H_off  ), r8->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r9H_off  ), r9->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r10H_off ), r10->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r11H_off ), r11->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r12H_off ), r12->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r13H_off ), r13->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r14H_off ), r14->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET( r15H_off ), r15->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm0H_off ), xmm0->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm1H_off ), xmm1->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm2H_off ), xmm2->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm3H_off ), xmm3->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm4H_off ), xmm4->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm5H_off ), xmm5->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm6H_off ), xmm6->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm7H_off ), xmm7->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm8H_off ), xmm8->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm9H_off ), xmm9->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm10H_off), xmm10->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm11H_off), xmm11->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm12H_off), xmm12->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm13H_off), xmm13->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm14H_off), xmm14->as_VMReg()->next());
     map->set_callee_saved(STACK_OFFSET(xmm15H_off), xmm15->as_VMReg()->next());
   }
   return map;
 }
 void RegisterSaver::restore_live_registers(MacroAssembler* masm, bool restore_vectors) {
   if (frame::arg_reg_save_area_bytes != 0) {
     // Pop arg register save area
     __ addptr(rsp, frame::arg_reg_save_area_bytes);
   }
 #ifdef COMPILER2
   if (restore_vectors) {
     // Restore upper half of YMM registes.
     assert(UseAVX > 0, "256bit vectors are supported only with AVX");
     assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
     __ vinsertf128h(xmm0, Address(rsp,  0));
     __ vinsertf128h(xmm1, Address(rsp, 16));
     __ vinsertf128h(xmm2, Address(rsp, 32));
     __ vinsertf128h(xmm3, Address(rsp, 48));
     __ vinsertf128h(xmm4, Address(rsp, 64));
     __ vinsertf128h(xmm5, Address(rsp, 80));
     __ vinsertf128h(xmm6, Address(rsp, 96));
     __ vinsertf128h(xmm7, Address(rsp,112));
     __ vinsertf128h(xmm8, Address(rsp,128));
     __ vinsertf128h(xmm9, Address(rsp,144));
     __ vinsertf128h(xmm10, Address(rsp,160));
     __ vinsertf128h(xmm11, Address(rsp,176));
     __ vinsertf128h(xmm12, Address(rsp,192));
     __ vinsertf128h(xmm13, Address(rsp,208));
     __ vinsertf128h(xmm14, Address(rsp,224));
     __ vinsertf128h(xmm15, Address(rsp,240));
     __ addptr(rsp, 256);
   }
 #else
   assert(!restore_vectors, "vectors are generated only by C2");
 #endif
   // Recover CPU state
   __ pop_CPU_state();
   // Get the rbp described implicitly by the calling convention (no oopMap)
   __ pop(rbp);
 }
 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
   // Just restore result register. Only used by deoptimization. By
   // now any callee save register that needs to be restored to a c2
   // caller of the deoptee has been extracted into the vframeArray
   // and will be stuffed into the c2i adapter we create for later
   // restoration so only result registers need to be restored here.
   // Restore fp result register
   __ movdbl(xmm0, Address(rsp, xmm0_offset_in_bytes()));
   // Restore integer result register
   __ movptr(rax, Address(rsp, rax_offset_in_bytes()));
   __ movptr(rdx, Address(rsp, rdx_offset_in_bytes()));
   // Pop all of the register save are off the stack except the return address
   __ addptr(rsp, return_offset_in_bytes());
 }
 // Is vector's size (in bytes) bigger than a size saved by default?
 // 16 bytes XMM registers are saved by default using fxsave/fxrstor instructions.
 bool SharedRuntime::is_wide_vector(int size) {
   return size > 16;
 }
 // The java_calling_convention describes stack locations as ideal slots on
 // a frame with no abi restrictions. Since we must observe abi restrictions
 // (like the placement of the register window) the slots must be biased by
 // the following value.
 static int reg2offset_in(VMReg r) {
   // Account for saved rbp and return address
   // This should really be in_preserve_stack_slots
   return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size;
 }
 static int reg2offset_out(VMReg r) {
   return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
 }
 // ---------------------------------------------------------------------------
 // Read the array of BasicTypes from a signature, and compute where the
 // arguments should go.  Values in the VMRegPair regs array refer to 4-byte
 // quantities.  Values less than VMRegImpl::stack0 are registers, those above
 // refer to 4-byte stack slots.  All stack slots are based off of the stack pointer
 // as framesizes are fixed.
 // VMRegImpl::stack0 refers to the first slot 0(sp).
 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher.  Register
 // up to RegisterImpl::number_of_registers) are the 64-bit
 // integer registers.
 // Note: the INPUTS in sig_bt are in units of Java argument words, which are
 // either 32-bit or 64-bit depending on the build.  The OUTPUTS are in 32-bit
 // units regardless of build. Of course for i486 there is no 64 bit build
 // The Java calling convention is a "shifted" version of the C ABI.
 // By skipping the first C ABI register we can call non-static jni methods
 // with small numbers of arguments without having to shuffle the arguments
 // at all. Since we control the java ABI we ought to at least get some
 // advantage out of it.
 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
                                            VMRegPair *regs,
                                            int total_args_passed,
                                            int is_outgoing) {
   // Create the mapping between argument positions and
   // registers.
   static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = {
     j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5
   };
   static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_j] = {
     j_farg0, j_farg1, j_farg2, j_farg3,
     j_farg4, j_farg5, j_farg6, j_farg7
   };
   uint int_args = 0;
   uint fp_args = 0;
   uint stk_args = 0; // inc by 2 each time
   for (int i = 0; i < total_args_passed; i++) {
     switch (sig_bt[i]) {
     case T_BOOLEAN:
     case T_CHAR:
     case T_BYTE:
     case T_SHORT:
     case T_INT:
       if (int_args < Argument::n_int_register_parameters_j) {
         regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
       } else {
         regs[i].set1(VMRegImpl::stack2reg(stk_args));
         stk_args += 2;
       }
       break;
     case T_VOID:
       // halves of T_LONG or T_DOUBLE
       assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
       regs[i].set_bad();
       break;
     case T_LONG:
       assert(sig_bt[i + 1] == T_VOID, "expecting half");
       // fall through
     case T_OBJECT:
     case T_ARRAY:
     case T_ADDRESS:
       if (int_args < Argument::n_int_register_parameters_j) {
         regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
       } else {
         regs[i].set2(VMRegImpl::stack2reg(stk_args));
         stk_args += 2;
       }
       break;
     case T_FLOAT:
       if (fp_args < Argument::n_float_register_parameters_j) {
         regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
       } else {
         regs[i].set1(VMRegImpl::stack2reg(stk_args));
         stk_args += 2;
       }
       break;
     case T_DOUBLE:
       assert(sig_bt[i + 1] == T_VOID, "expecting half");
       if (fp_args < Argument::n_float_register_parameters_j) {
         regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
       } else {
         regs[i].set2(VMRegImpl::stack2reg(stk_args));
         stk_args += 2;
       }
       break;
     default:
       ShouldNotReachHere();
       break;
     }
   }
   return round_to(stk_args, 2);
 }
 // Patch the callers callsite with entry to compiled code if it exists.
 static void patch_callers_callsite(MacroAssembler *masm) {
   Label L;
   __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
   __ jcc(Assembler::equal, L);
   // Save the current stack pointer
   __ mov(r13, rsp);
   // Schedule the branch target address early.
   // Call into the VM to patch the caller, then jump to compiled callee
   // rax isn't live so capture return address while we easily can
   __ movptr(rax, Address(rsp, 0));
   // align stack so push_CPU_state doesn't fault
   __ andptr(rsp, -(StackAlignmentInBytes));
   __ push_CPU_state();
   // VM needs caller's callsite
   // VM needs target method
   // This needs to be a long call since we will relocate this adapter to
   // the codeBuffer and it may not reach
   // Allocate argument register save area
   if (frame::arg_reg_save_area_bytes != 0) {
     __ subptr(rsp, frame::arg_reg_save_area_bytes);
   }
   __ mov(c_rarg0, rbx);
   __ mov(c_rarg1, rax);
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
   // De-allocate argument register save area
   if (frame::arg_reg_save_area_bytes != 0) {
     __ addptr(rsp, frame::arg_reg_save_area_bytes);
   }
   __ pop_CPU_state();
   // restore sp
   __ mov(rsp, r13);
   __ bind(L);
 }
 static void gen_c2i_adapter(MacroAssembler *masm,
                             int total_args_passed,
                             int comp_args_on_stack,
                             const BasicType *sig_bt,
                             const VMRegPair *regs,
                             Label& skip_fixup) {
   // Before we get into the guts of the C2I adapter, see if we should be here
   // at all.  We've come from compiled code and are attempting to jump to the
   // interpreter, which means the caller made a static call to get here
   // (vcalls always get a compiled target if there is one).  Check for a
   // compiled target.  If there is one, we need to patch the caller's call.
   patch_callers_callsite(masm);
   __ bind(skip_fixup);
   // Since all args are passed on the stack, total_args_passed *
   // Interpreter::stackElementSize is the space we need. Plus 1 because
   // we also account for the return address location since
   // we store it first rather than hold it in rax across all the shuffling
   int extraspace = (total_args_passed * Interpreter::stackElementSize) + wordSize;
   // stack is aligned, keep it that way
   extraspace = round_to(extraspace, 2*wordSize);
   // Get return address
   __ pop(rax);
   // set senderSP value
   __ mov(r13, rsp);
   __ subptr(rsp, extraspace);
   // Store the return address in the expected location
   __ movptr(Address(rsp, 0), rax);
   // Now write the args into the outgoing interpreter space
   for (int i = 0; i < total_args_passed; i++) {
     if (sig_bt[i] == T_VOID) {
       assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
       continue;
     }
     // offset to start parameters
     int st_off   = (total_args_passed - i) * Interpreter::stackElementSize;
     int next_off = st_off - Interpreter::stackElementSize;
     // Say 4 args:
     // i   st_off
     // 0   32 T_LONG
     // 1   24 T_VOID
     // 2   16 T_OBJECT
     // 3    8 T_BOOL
     // -    0 return address
     //
     // However to make thing extra confusing. Because we can fit a long/double in
     // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter
     // leaves one slot empty and only stores to a single slot. In this case the
     // slot that is occupied is the T_VOID slot. See I said it was confusing.
     VMReg r_1 = regs[i].first();
     VMReg r_2 = regs[i].second();
     if (!r_1->is_valid()) {
       assert(!r_2->is_valid(), "");
       continue;
     }
     if (r_1->is_stack()) {
       // memory to memory use rax
       int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;
       if (!r_2->is_valid()) {
         // sign extend??
         __ movl(rax, Address(rsp, ld_off));
         __ movptr(Address(rsp, st_off), rax);
       } else {
         __ movq(rax, Address(rsp, ld_off));
         // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
         // T_DOUBLE and T_LONG use two slots in the interpreter
         if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
           // ld_off == LSW, ld_off+wordSize == MSW
           // st_off == MSW, next_off == LSW
           __ movq(Address(rsp, next_off), rax);
 #ifdef ASSERT
           // Overwrite the unused slot with known junk
           __ mov64(rax, CONST64(0xdeadffffdeadaaaa));
           __ movptr(Address(rsp, st_off), rax);
 #endif /* ASSERT */
         } else {
           __ movq(Address(rsp, st_off), rax);
         }
       }
     } else if (r_1->is_Register()) {
       Register r = r_1->as_Register();
       if (!r_2->is_valid()) {
         // must be only an int (or less ) so move only 32bits to slot
         // why not sign extend??
         __ movl(Address(rsp, st_off), r);
       } else {
         // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
         // T_DOUBLE and T_LONG use two slots in the interpreter
         if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
           // long/double in gpr
 #ifdef ASSERT
           // Overwrite the unused slot with known junk
           __ mov64(rax, CONST64(0xdeadffffdeadaaab));
           __ movptr(Address(rsp, st_off), rax);
 #endif /* ASSERT */
           __ movq(Address(rsp, next_off), r);
         } else {
           __ movptr(Address(rsp, st_off), r);
         }
       }
     } else {
       assert(r_1->is_XMMRegister(), "");
       if (!r_2->is_valid()) {
         // only a float use just part of the slot
         __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
       } else {
 #ifdef ASSERT
         // Overwrite the unused slot with known junk
         __ mov64(rax, CONST64(0xdeadffffdeadaaac));
         __ movptr(Address(rsp, st_off), rax);
 #endif /* ASSERT */
         __ movdbl(Address(rsp, next_off), r_1->as_XMMRegister());
       }
     }
   }
   // Schedule the branch target address early.
   __ movptr(rcx, Address(rbx, in_bytes(Method::interpreter_entry_offset())));
   __ jmp(rcx);
 }
 static void range_check(MacroAssembler* masm, Register pc_reg, Register temp_reg,
                         address code_start, address code_end,
                         Label& L_ok) {
   Label L_fail;
   __ lea(temp_reg, ExternalAddress(code_start));
   __ cmpptr(pc_reg, temp_reg);
   __ jcc(Assembler::belowEqual, L_fail);
   __ lea(temp_reg, ExternalAddress(code_end));
   __ cmpptr(pc_reg, temp_reg);
   __ jcc(Assembler::below, L_ok);
   __ bind(L_fail);
 }
 static void gen_i2c_adapter(MacroAssembler *masm,
                             int total_args_passed,
                             int comp_args_on_stack,
                             const BasicType *sig_bt,
                             const VMRegPair *regs) {
   // Note: r13 contains the senderSP on entry. We must preserve it since
   // we may do a i2c -> c2i transition if we lose a race where compiled
   // code goes non-entrant while we get args ready.
   // In addition we use r13 to locate all the interpreter args as
   // we must align the stack to 16 bytes on an i2c entry else we
   // lose alignment we expect in all compiled code and register
   // save code can segv when fxsave instructions find improperly
   // aligned stack pointer.
   // Adapters can be frameless because they do not require the caller
   // to perform additional cleanup work, such as correcting the stack pointer.
   // An i2c adapter is frameless because the *caller* frame, which is interpreted,
   // routinely repairs its own stack pointer (from interpreter_frame_last_sp),
   // even if a callee has modified the stack pointer.
   // A c2i adapter is frameless because the *callee* frame, which is interpreted,
   // routinely repairs its caller's stack pointer (from sender_sp, which is set
   // up via the senderSP register).
   // In other words, if *either* the caller or callee is interpreted, we can
   // get the stack pointer repaired after a call.
   // This is why c2i and i2c adapters cannot be indefinitely composed.
   // In particular, if a c2i adapter were to somehow call an i2c adapter,
   // both caller and callee would be compiled methods, and neither would
   // clean up the stack pointer changes performed by the two adapters.
   // If this happens, control eventually transfers back to the compiled
   // caller, but with an uncorrected stack, causing delayed havoc.
   // Pick up the return address
   __ movptr(rax, Address(rsp, 0));
   if (VerifyAdapterCalls &&
       (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) {
     // So, let's test for cascading c2i/i2c adapters right now.
     //  assert(Interpreter::contains($return_addr) ||
     //         StubRoutines::contains($return_addr),
     //         "i2c adapter must return to an interpreter frame");
     __ block_comment("verify_i2c { ");
     Label L_ok;
     if (Interpreter::code() != NULL)
       range_check(masm, rax, r11,
                   Interpreter::code()->code_start(), Interpreter::code()->code_end(),
                   L_ok);
     if (StubRoutines::code1() != NULL)
       range_check(masm, rax, r11,
                   StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(),
                   L_ok);
     if (StubRoutines::code2() != NULL)
       range_check(masm, rax, r11,
                   StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(),
                   L_ok);
     const char* msg = "i2c adapter must return to an interpreter frame";
     __ block_comment(msg);
     __ stop(msg);
     __ bind(L_ok);
     __ block_comment("} verify_i2ce ");
   }
   // Must preserve original SP for loading incoming arguments because
   // we need to align the outgoing SP for compiled code.
   __ movptr(r11, rsp);
   // Cut-out for having no stack args.  Since up to 2 int/oop args are passed
   // in registers, we will occasionally have no stack args.
   int comp_words_on_stack = 0;
   if (comp_args_on_stack) {
     // Sig words on the stack are greater-than VMRegImpl::stack0.  Those in
     // registers are below.  By subtracting stack0, we either get a negative
     // number (all values in registers) or the maximum stack slot accessed.
     // Convert 4-byte c2 stack slots to words.
     comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord;
     // Round up to miminum stack alignment, in wordSize
     comp_words_on_stack = round_to(comp_words_on_stack, 2);
     __ subptr(rsp, comp_words_on_stack * wordSize);
   }
   // Ensure compiled code always sees stack at proper alignment
   __ andptr(rsp, -16);
   // push the return address and misalign the stack that youngest frame always sees
   // as far as the placement of the call instruction
   __ push(rax);
   // Put saved SP in another register
   const Register saved_sp = rax;
   __ movptr(saved_sp, r11);
   // Will jump to the compiled code just as if compiled code was doing it.
   // Pre-load the register-jump target early, to schedule it better.
   __ movptr(r11, Address(rbx, in_bytes(Method::from_compiled_offset())));
   // Now generate the shuffle code.  Pick up all register args and move the
   // rest through the floating point stack top.
   for (int i = 0; i < total_args_passed; i++) {
     if (sig_bt[i] == T_VOID) {
       // Longs and doubles are passed in native word order, but misaligned
       // in the 32-bit build.
       assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
       continue;
     }
     // Pick up 0, 1 or 2 words from SP+offset.
     assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
             "scrambled load targets?");
     // Load in argument order going down.
     int ld_off = (total_args_passed - i)*Interpreter::stackElementSize;
     // Point to interpreter value (vs. tag)
     int next_off = ld_off - Interpreter::stackElementSize;
     //
     //
     //
     VMReg r_1 = regs[i].first();
     VMReg r_2 = regs[i].second();
     if (!r_1->is_valid()) {
       assert(!r_2->is_valid(), "");
       continue;
     }
     if (r_1->is_stack()) {
       // Convert stack slot to an SP offset (+ wordSize to account for return address )
       int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;
       // We can use r13 as a temp here because compiled code doesn't need r13 as an input
       // and if we end up going thru a c2i because of a miss a reasonable value of r13
       // will be generated.
       if (!r_2->is_valid()) {
         // sign extend???
         __ movl(r13, Address(saved_sp, ld_off));
         __ movptr(Address(rsp, st_off), r13);
       } else {
         //
         // We are using two optoregs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
         // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
         // So we must adjust where to pick up the data to match the interpreter.
         //
         // Interpreter local[n] == MSW, local[n+1] == LSW however locals
         // are accessed as negative so LSW is at LOW address
         // ld_off is MSW so get LSW
         const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
                            next_off : ld_off;
         __ movq(r13, Address(saved_sp, offset));
         // st_off is LSW (i.e. reg.first())
         __ movq(Address(rsp, st_off), r13);
       }
     } else if (r_1->is_Register()) {  // Register argument
       Register r = r_1->as_Register();
       assert(r != rax, "must be different");
       if (r_2->is_valid()) {
         //
         // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
         // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
         // So we must adjust where to pick up the data to match the interpreter.
         const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
                            next_off : ld_off;
         // this can be a misaligned move
         __ movq(r, Address(saved_sp, offset));
       } else {
         // sign extend and use a full word?
         __ movl(r, Address(saved_sp, ld_off));
       }
     } else {
       if (!r_2->is_valid()) {
         __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
       } else {
         __ movdbl(r_1->as_XMMRegister(), Address(saved_sp, next_off));
       }
     }
   }
   // 6243940 We might end up in handle_wrong_method if
   // the callee is deoptimized as we race thru here. If that
   // happens we don't want to take a safepoint because the
   // caller frame will look interpreted and arguments are now
   // "compiled" so it is much better to make this transition
   // invisible to the stack walking code. Unfortunately if
   // we try and find the callee by normal means a safepoint
   // is possible. So we stash the desired callee in the thread
   // and the vm will find there should this case occur.
   __ movptr(Address(r15_thread, JavaThread::callee_target_offset()), rbx);
   // put Method* where a c2i would expect should we end up there
   // only needed becaus eof c2 resolve stubs return Method* as a result in
   // rax
   __ mov(rax, rbx);
   __ jmp(r11);
 }
 // ---------------------------------------------------------------
 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
                                                             int total_args_passed,
                                                             int comp_args_on_stack,
                                                             const BasicType *sig_bt,
                                                             const VMRegPair *regs,
                                                             AdapterFingerPrint* fingerprint) {
   address i2c_entry = __ pc();
   gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);
   // -------------------------------------------------------------------------
   // Generate a C2I adapter.  On entry we know rbx holds the Method* during calls
   // to the interpreter.  The args start out packed in the compiled layout.  They
   // need to be unpacked into the interpreter layout.  This will almost always
   // require some stack space.  We grow the current (compiled) stack, then repack
   // the args.  We  finally end in a jump to the generic interpreter entry point.
   // On exit from the interpreter, the interpreter will restore our SP (lest the
   // compiled code, which relys solely on SP and not RBP, get sick).
   address c2i_unverified_entry = __ pc();
   Label skip_fixup;
   Label ok;
   Register holder = rax;
   Register receiver = j_rarg0;
   Register temp = rbx;
   {
     __ load_klass(temp, receiver);
     __ cmpptr(temp, Address(holder, CompiledICHolder::holder_klass_offset()));
     __ movptr(rbx, Address(holder, CompiledICHolder::holder_metadata_offset()));
     __ jcc(Assembler::equal, ok);
     __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
     __ bind(ok);
     // Method might have been compiled since the call site was patched to
     // interpreted if that is the case treat it as a miss so we can get
     // the call site corrected.
     __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
     __ jcc(Assembler::equal, skip_fixup);
     __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
   }
   address c2i_entry = __ pc();
   gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);
   __ flush();
   return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);
 }
 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
                                          VMRegPair *regs,
                                          VMRegPair *regs2,
                                          int total_args_passed) {
   assert(regs2 == NULL, "not needed on x86");
 // We return the amount of VMRegImpl stack slots we need to reserve for all
 // the arguments NOT counting out_preserve_stack_slots.
 // NOTE: These arrays will have to change when c1 is ported
 #ifdef _WIN64
     static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
       c_rarg0, c_rarg1, c_rarg2, c_rarg3
     };
     static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
       c_farg0, c_farg1, c_farg2, c_farg3
     };
 #else
     static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
       c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, c_rarg5
     };
     static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
       c_farg0, c_farg1, c_farg2, c_farg3,
       c_farg4, c_farg5, c_farg6, c_farg7
     };
 #endif // _WIN64
     uint int_args = 0;
     uint fp_args = 0;
     uint stk_args = 0; // inc by 2 each time
     for (int i = 0; i < total_args_passed; i++) {
       switch (sig_bt[i]) {
       case T_BOOLEAN:
       case T_CHAR:
       case T_BYTE:
       case T_SHORT:
       case T_INT:
         if (int_args < Argument::n_int_register_parameters_c) {
           regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
 #ifdef _WIN64
           fp_args++;
           // Allocate slots for callee to stuff register args the stack.
           stk_args += 2;
 #endif
         } else {
           regs[i].set1(VMRegImpl::stack2reg(stk_args));
           stk_args += 2;
         }
         break;
       case T_LONG:
         assert(sig_bt[i + 1] == T_VOID, "expecting half");
         // fall through
       case T_OBJECT:
       case T_ARRAY:
       case T_ADDRESS:
       case T_METADATA:
         if (int_args < Argument::n_int_register_parameters_c) {
           regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
 #ifdef _WIN64
           fp_args++;
           stk_args += 2;
 #endif
         } else {
           regs[i].set2(VMRegImpl::stack2reg(stk_args));
           stk_args += 2;
         }
         break;
       case T_FLOAT:
         if (fp_args < Argument::n_float_register_parameters_c) {
           regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
 #ifdef _WIN64
           int_args++;
           // Allocate slots for callee to stuff register args the stack.
           stk_args += 2;
 #endif
         } else {
           regs[i].set1(VMRegImpl::stack2reg(stk_args));
           stk_args += 2;
         }
         break;
       case T_DOUBLE:
         assert(sig_bt[i + 1] == T_VOID, "expecting half");
         if (fp_args < Argument::n_float_register_parameters_c) {
           regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
 #ifdef _WIN64
           int_args++;
           // Allocate slots for callee to stuff register args the stack.
           stk_args += 2;
 #endif
         } else {
           regs[i].set2(VMRegImpl::stack2reg(stk_args));
           stk_args += 2;
         }
         break;
       case T_VOID: // Halves of longs and doubles
         assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
         regs[i].set_bad();
         break;
       default:
         ShouldNotReachHere();
         break;
       }
     }
 #ifdef _WIN64
   // windows abi requires that we always allocate enough stack space
   // for 4 64bit registers to be stored down.
   if (stk_args < 8) {
     stk_args = 8;
   }
 #endif // _WIN64
   return stk_args;
 }
 // On 64 bit we will store integer like items to the stack as
 // 64 bits items (sparc abi) even though java would only store
 // 32bits for a parameter. On 32bit it will simply be 32 bits
 // So this routine will do 32->32 on 32bit and 32->64 on 64bit
 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
   if (src.first()->is_stack()) {
     if (dst.first()->is_stack()) {
       // stack to stack
       __ movslq(rax, Address(rbp, reg2offset_in(src.first())));
       __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
     } else {
       // stack to reg
       __ movslq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
     }
   } else if (dst.first()->is_stack()) {
     // reg to stack
     // Do we really have to sign extend???
     // __ movslq(src.first()->as_Register(), src.first()->as_Register());
     __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
   } else {
     // Do we really have to sign extend???
     // __ movslq(dst.first()->as_Register(), src.first()->as_Register());
     if (dst.first() != src.first()) {
       __ movq(dst.first()->as_Register(), src.first()->as_Register());
     }
   }
 }
 static void move_ptr(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
   if (src.first()->is_stack()) {
     if (dst.first()->is_stack()) {
       // stack to stack
       __ movq(rax, Address(rbp, reg2offset_in(src.first())));
       __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
     } else {
       // stack to reg
       __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
     }
   } else if (dst.first()->is_stack()) {
     // reg to stack
     __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
   } else {
     if (dst.first() != src.first()) {
       __ movq(dst.first()->as_Register(), src.first()->as_Register());
     }
   }
 }
 // An oop arg. Must pass a handle not the oop itself
 static void object_move(MacroAssembler* masm,
                         OopMap* map,
                         int oop_handle_offset,
                         int framesize_in_slots,
                         VMRegPair src,
                         VMRegPair dst,
                         bool is_receiver,
                         int* receiver_offset) {
   // must pass a handle. First figure out the location we use as a handle
   Register rHandle = dst.first()->is_stack() ? rax : dst.first()->as_Register();
   // See if oop is NULL if it is we need no handle
   if (src.first()->is_stack()) {
     // Oop is already on the stack as an argument
     int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
     map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
     if (is_receiver) {
       *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
     }
     __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);
     __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));
     // conditionally move a NULL
     __ cmovptr(Assembler::equal, rHandle, Address(rbp, reg2offset_in(src.first())));
   } else {
     // Oop is in an a register we must store it to the space we reserve
     // on the stack for oop_handles and pass a handle if oop is non-NULL
     const Register rOop = src.first()->as_Register();
     int oop_slot;
     if (rOop == j_rarg0)
       oop_slot = 0;
     else if (rOop == j_rarg1)
       oop_slot = 1;
     else if (rOop == j_rarg2)
       oop_slot = 2;
     else if (rOop == j_rarg3)
       oop_slot = 3;
     else if (rOop == j_rarg4)
       oop_slot = 4;
     else {
       assert(rOop == j_rarg5, "wrong register");
       oop_slot = 5;
     }
     oop_slot = oop_slot * VMRegImpl::slots_per_word + oop_handle_offset;
     int offset = oop_slot*VMRegImpl::stack_slot_size;
     map->set_oop(VMRegImpl::stack2reg(oop_slot));
     // Store oop in handle area, may be NULL
     __ movptr(Address(rsp, offset), rOop);
     if (is_receiver) {
       *receiver_offset = offset;
     }
     __ cmpptr(rOop, (int32_t)NULL_WORD);
     __ lea(rHandle, Address(rsp, offset));
     // conditionally move a NULL from the handle area where it was just stored
     __ cmovptr(Assembler::equal, rHandle, Address(rsp, offset));
   }
   // If arg is on the stack then place it otherwise it is already in correct reg.
   if (dst.first()->is_stack()) {
     __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
   }
 }
 // A float arg may have to do float reg int reg conversion
 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
   assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
   // The calling conventions assures us that each VMregpair is either
   // all really one physical register or adjacent stack slots.
   // This greatly simplifies the cases here compared to sparc.
   if (src.first()->is_stack()) {
     if (dst.first()->is_stack()) {
       __ movl(rax, Address(rbp, reg2offset_in(src.first())));
       __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
     } else {
       // stack to reg
       assert(dst.first()->is_XMMRegister(), "only expect xmm registers as parameters");
       __ movflt(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_in(src.first())));
     }
   } else if (dst.first()->is_stack()) {
     // reg to stack
     assert(src.first()->is_XMMRegister(), "only expect xmm registers as parameters");
     __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
   } else {
     // reg to reg
     // In theory these overlap but the ordering is such that this is likely a nop
     if ( src.first() != dst.first()) {
       __ movdbl(dst.first()->as_XMMRegister(),  src.first()->as_XMMRegister());
     }
   }
 }
 // A long move
 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
   // The calling conventions assures us that each VMregpair is either
   // all really one physical register or adjacent stack slots.
   // This greatly simplifies the cases here compared to sparc.
   if (src.is_single_phys_reg() ) {
     if (dst.is_single_phys_reg()) {
       if (dst.first() != src.first()) {
         __ mov(dst.first()->as_Register(), src.first()->as_Register());
       }
     } else {
       assert(dst.is_single_reg(), "not a stack pair");
       __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
     }
   } else if (dst.is_single_phys_reg()) {
     assert(src.is_single_reg(),  "not a stack pair");
     __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_out(src.first())));
   } else {
     assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
     __ movq(rax, Address(rbp, reg2offset_in(src.first())));
     __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
   }
 }
 // A double move
 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
   // The calling conventions assures us that each VMregpair is either
   // all really one physical register or adjacent stack slots.
   // This greatly simplifies the cases here compared to sparc.
   if (src.is_single_phys_reg() ) {
     if (dst.is_single_phys_reg()) {
       // In theory these overlap but the ordering is such that this is likely a nop
       if ( src.first() != dst.first()) {
         __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());
       }
     } else {
       assert(dst.is_single_reg(), "not a stack pair");
       __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
     }
   } else if (dst.is_single_phys_reg()) {
     assert(src.is_single_reg(),  "not a stack pair");
     __ movdbl(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_out(src.first())));
   } else {
     assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
     __ movq(rax, Address(rbp, reg2offset_in(src.first())));
     __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
   }
 }
 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
   // We always ignore the frame_slots arg and just use the space just below frame pointer
   // which by this time is free to use
   switch (ret_type) {
   case T_FLOAT:
     __ movflt(Address(rbp, -wordSize), xmm0);
     break;
   case T_DOUBLE:
     __ movdbl(Address(rbp, -wordSize), xmm0);
     break;
   case T_VOID:  break;
   default: {
     __ movptr(Address(rbp, -wordSize), rax);
     }
   }
 }
 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
   // We always ignore the frame_slots arg and just use the space just below frame pointer
   // which by this time is free to use
   switch (ret_type) {
   case T_FLOAT:
     __ movflt(xmm0, Address(rbp, -wordSize));
     break;
   case T_DOUBLE:
     __ movdbl(xmm0, Address(rbp, -wordSize));
     break;
   case T_VOID:  break;
   default: {
     __ movptr(rax, Address(rbp, -wordSize));
     }
   }
 }
 static void save_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
     for ( int i = first_arg ; i < arg_count ; i++ ) {
       if (args[i].first()->is_Register()) {
         __ push(args[i].first()->as_Register());
       } else if (args[i].first()->is_XMMRegister()) {
         __ subptr(rsp, 2*wordSize);
         __ movdbl(Address(rsp, 0), args[i].first()->as_XMMRegister());
       }
     }
 }
 static void restore_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
     for ( int i = arg_count - 1 ; i >= first_arg ; i-- ) {
       if (args[i].first()->is_Register()) {
         __ pop(args[i].first()->as_Register());
       } else if (args[i].first()->is_XMMRegister()) {
         __ movdbl(args[i].first()->as_XMMRegister(), Address(rsp, 0));
         __ addptr(rsp, 2*wordSize);
       }
     }
 }
 static void save_or_restore_arguments(MacroAssembler* masm,
                                       const int stack_slots,
                                       const int total_in_args,
                                       const int arg_save_area,
                                       OopMap* map,
                                       VMRegPair* in_regs,
                                       BasicType* in_sig_bt) {
   // if map is non-NULL then the code should store the values,
   // otherwise it should load them.
   int slot = arg_save_area;
   // Save down double word first
   for ( int i = 0; i < total_in_args; i++) {
     if (in_regs[i].first()->is_XMMRegister() && in_sig_bt[i] == T_DOUBLE) {
       int offset = slot * VMRegImpl::stack_slot_size;
       slot += VMRegImpl::slots_per_word;
       assert(slot <= stack_slots, "overflow");
       if (map != NULL) {
         __ movdbl(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
       } else {
         __ movdbl(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
       }
     }
     if (in_regs[i].first()->is_Register() &&
         (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_ARRAY)) {
       int offset = slot * VMRegImpl::stack_slot_size;
       if (map != NULL) {
         __ movq(Address(rsp, offset), in_regs[i].first()->as_Register());
         if (in_sig_bt[i] == T_ARRAY) {
           map->set_oop(VMRegImpl::stack2reg(slot));;
         }
       } else {
         __ movq(in_regs[i].first()->as_Register(), Address(rsp, offset));
       }
       slot += VMRegImpl::slots_per_word;
     }
   }
   // Save or restore single word registers
   for ( int i = 0; i < total_in_args; i++) {
     if (in_regs[i].first()->is_Register()) {
       int offset = slot * VMRegImpl::stack_slot_size;
       slot++;
       assert(slot <= stack_slots, "overflow");
       // Value is in an input register pass we must flush it to the stack
       const Register reg = in_regs[i].first()->as_Register();
       switch (in_sig_bt[i]) {
         case T_BOOLEAN:
         case T_CHAR:
         case T_BYTE:
         case T_SHORT:
         case T_INT:
           if (map != NULL) {
             __ movl(Address(rsp, offset), reg);
           } else {
             __ movl(reg, Address(rsp, offset));
           }
           break;
         case T_ARRAY:
         case T_LONG:
           // handled above
           break;
         case T_OBJECT:
         default: ShouldNotReachHere();
       }
     } else if (in_regs[i].first()->is_XMMRegister()) {
       if (in_sig_bt[i] == T_FLOAT) {
         int offset = slot * VMRegImpl::stack_slot_size;
         slot++;
         assert(slot <= stack_slots, "overflow");
         if (map != NULL) {
           __ movflt(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
         } else {
           __ movflt(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
         }
       }
     } else if (in_regs[i].first()->is_stack()) {
       if (in_sig_bt[i] == T_ARRAY && map != NULL) {
         int offset_in_older_frame = in_regs[i].first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
         map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + stack_slots));
       }
     }
   }
 }
 // Check GC_locker::needs_gc and enter the runtime if it's true.  This
 // keeps a new JNI critical region from starting until a GC has been
 // forced.  Save down any oops in registers and describe them in an
 // OopMap.
 static void check_needs_gc_for_critical_native(MacroAssembler* masm,
                                                int stack_slots,
                                                int total_c_args,
                                                int total_in_args,
                                                int arg_save_area,
                                                OopMapSet* oop_maps,
                                                VMRegPair* in_regs,
                                                BasicType* in_sig_bt) {
   __ block_comment("check GC_locker::needs_gc");
   Label cont;
   __ cmp8(ExternalAddress((address)GC_locker::needs_gc_address()), false);
   __ jcc(Assembler::equal, cont);
   // Save down any incoming oops and call into the runtime to halt for a GC
   OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
   save_or_restore_arguments(masm, stack_slots, total_in_args,
                             arg_save_area, map, in_regs, in_sig_bt);
   address the_pc = __ pc();
   oop_maps->add_gc_map( __ offset(), map);
   __ set_last_Java_frame(rsp, noreg, the_pc);
   __ block_comment("block_for_jni_critical");
   __ movptr(c_rarg0, r15_thread);
   __ mov(r12, rsp); // remember sp
   __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
   __ andptr(rsp, -16); // align stack as required by ABI
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::block_for_jni_critical)));
   __ mov(rsp, r12); // restore sp
   __ reinit_heapbase();
   __ reset_last_Java_frame(false);
   save_or_restore_arguments(masm, stack_slots, total_in_args,
                             arg_save_area, NULL, in_regs, in_sig_bt);
   __ bind(cont);
 #ifdef ASSERT
   if (StressCriticalJNINatives) {
     // Stress register saving
     OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
     save_or_restore_arguments(masm, stack_slots, total_in_args,
                               arg_save_area, map, in_regs, in_sig_bt);
     // Destroy argument registers
     for (int i = 0; i < total_in_args - 1; i++) {
       if (in_regs[i].first()->is_Register()) {
         const Register reg = in_regs[i].first()->as_Register();
         __ xorptr(reg, reg);
       } else if (in_regs[i].first()->is_XMMRegister()) {
         __ xorpd(in_regs[i].first()->as_XMMRegister(), in_regs[i].first()->as_XMMRegister());
       } else if (in_regs[i].first()->is_FloatRegister()) {
         ShouldNotReachHere();
       } else if (in_regs[i].first()->is_stack()) {
         // Nothing to do
       } else {
         ShouldNotReachHere();
       }
       if (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_DOUBLE) {
         i++;
       }
     }
     save_or_restore_arguments(masm, stack_slots, total_in_args,
                               arg_save_area, NULL, in_regs, in_sig_bt);
   }
 #endif
 }
 // Unpack an array argument into a pointer to the body and the length
 // if the array is non-null, otherwise pass 0 for both.
 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) {
   Register tmp_reg = rax;
   assert(!body_arg.first()->is_Register() || body_arg.first()->as_Register() != tmp_reg,
          "possible collision");
   assert(!length_arg.first()->is_Register() || length_arg.first()->as_Register() != tmp_reg,
          "possible collision");
   __ block_comment("unpack_array_argument {");
   // Pass the length, ptr pair
   Label is_null, done;
   VMRegPair tmp;
   tmp.set_ptr(tmp_reg->as_VMReg());
   if (reg.first()->is_stack()) {
     // Load the arg up from the stack
     move_ptr(masm, reg, tmp);
     reg = tmp;
   }
   __ testptr(reg.first()->as_Register(), reg.first()->as_Register());
   __ jccb(Assembler::equal, is_null);
   __ lea(tmp_reg, Address(reg.first()->as_Register(), arrayOopDesc::base_offset_in_bytes(in_elem_type)));
   move_ptr(masm, tmp, body_arg);
   // load the length relative to the body.
   __ movl(tmp_reg, Address(tmp_reg, arrayOopDesc::length_offset_in_bytes() -
                            arrayOopDesc::base_offset_in_bytes(in_elem_type)));
   move32_64(masm, tmp, length_arg);
   __ jmpb(done);
   __ bind(is_null);
   // Pass zeros
   __ xorptr(tmp_reg, tmp_reg);
   move_ptr(masm, tmp, body_arg);
   move32_64(masm, tmp, length_arg);
   __ bind(done);
   __ block_comment("} unpack_array_argument");
 }
 // Different signatures may require very different orders for the move
 // to avoid clobbering other arguments.  There's no simple way to
 // order them safely.  Compute a safe order for issuing stores and
 // break any cycles in those stores.  This code is fairly general but
 // it's not necessary on the other platforms so we keep it in the
 // platform dependent code instead of moving it into a shared file.
 // (See bugs 7013347 & 7145024.)
 // Note that this code is specific to LP64.
 class ComputeMoveOrder: public StackObj {
   class MoveOperation: public ResourceObj {
     friend class ComputeMoveOrder;
    private:
     VMRegPair        _src;
     VMRegPair        _dst;
     int              _src_index;
     int              _dst_index;
     bool             _processed;
     MoveOperation*  _next;
     MoveOperation*  _prev;
     static int get_id(VMRegPair r) {
       return r.first()->value();
     }
    public:
     MoveOperation(int src_index, VMRegPair src, int dst_index, VMRegPair dst):
       _src(src)
     , _src_index(src_index)
     , _dst(dst)
     , _dst_index(dst_index)
     , _next(NULL)
     , _prev(NULL)
     , _processed(false) {
     }
     VMRegPair src() const              { return _src; }
     int src_id() const                 { return get_id(src()); }
     int src_index() const              { return _src_index; }
     VMRegPair dst() const              { return _dst; }
     void set_dst(int i, VMRegPair dst) { _dst_index = i, _dst = dst; }
     int dst_index() const              { return _dst_index; }
     int dst_id() const                 { return get_id(dst()); }
     MoveOperation* next() const       { return _next; }
     MoveOperation* prev() const       { return _prev; }
     void set_processed()               { _processed = true; }
     bool is_processed() const          { return _processed; }
     // insert
     void break_cycle(VMRegPair temp_register) {
       // create a new store following the last store
       // to move from the temp_register to the original
       MoveOperation* new_store = new MoveOperation(-1, temp_register, dst_index(), dst());
       // break the cycle of links and insert new_store at the end
       // break the reverse link.
       MoveOperation* p = prev();
       assert(p->next() == this, "must be");
       _prev = NULL;
       p->_next = new_store;
       new_store->_prev = p;
       // change the original store to save it's value in the temp.
       set_dst(-1, temp_register);
     }
     void link(GrowableArray<MoveOperation*>& killer) {
       // link this store in front the store that it depends on
       MoveOperation* n = killer.at_grow(src_id(), NULL);
       if (n != NULL) {
         assert(_next == NULL && n->_prev == NULL, "shouldn't have been set yet");
         _next = n;
         n->_prev = this;
       }
     }
   };
  private:
   GrowableArray<MoveOperation*> edges;
  public:
   ComputeMoveOrder(int total_in_args, VMRegPair* in_regs, int total_c_args, VMRegPair* out_regs,
                     BasicType* in_sig_bt, GrowableArray<int>& arg_order, VMRegPair tmp_vmreg) {
     // Move operations where the dest is the stack can all be
     // scheduled first since they can't interfere with the other moves.
     for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {
       if (in_sig_bt[i] == T_ARRAY) {
         c_arg--;
         if (out_regs[c_arg].first()->is_stack() &&
             out_regs[c_arg + 1].first()->is_stack()) {
           arg_order.push(i);
           arg_order.push(c_arg);
         } else {
           if (out_regs[c_arg].first()->is_stack() ||
               in_regs[i].first() == out_regs[c_arg].first()) {
             add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg + 1]);
           } else {
             add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);
           }
         }
       } else if (in_sig_bt[i] == T_VOID) {
         arg_order.push(i);
         arg_order.push(c_arg);
       } else {
         if (out_regs[c_arg].first()->is_stack() ||
             in_regs[i].first() == out_regs[c_arg].first()) {
           arg_order.push(i);
           arg_order.push(c_arg);
         } else {
           add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);
         }
       }
     }
     // Break any cycles in the register moves and emit the in the
     // proper order.
     GrowableArray<MoveOperation*>* stores = get_store_order(tmp_vmreg);
     for (int i = 0; i < stores->length(); i++) {
       arg_order.push(stores->at(i)->src_index());
       arg_order.push(stores->at(i)->dst_index());
     }
  }
   // Collected all the move operations
   void add_edge(int src_index, VMRegPair src, int dst_index, VMRegPair dst) {
     if (src.first() == dst.first()) return;
     edges.append(new MoveOperation(src_index, src, dst_index, dst));
   }
   // Walk the edges breaking cycles between moves.  The result list
   // can be walked in order to produce the proper set of loads
   GrowableArray<MoveOperation*>* get_store_order(VMRegPair temp_register) {
     // Record which moves kill which values
     GrowableArray<MoveOperation*> killer;
     for (int i = 0; i < edges.length(); i++) {
       MoveOperation* s = edges.at(i);
       assert(killer.at_grow(s->dst_id(), NULL) == NULL, "only one killer");
       killer.at_put_grow(s->dst_id(), s, NULL);
     }
     assert(killer.at_grow(MoveOperation::get_id(temp_register), NULL) == NULL,
            "make sure temp isn't in the registers that are killed");
     // create links between loads and stores
     for (int i = 0; i < edges.length(); i++) {
       edges.at(i)->link(killer);
     }
     // at this point, all the move operations are chained together
     // in a doubly linked list.  Processing it backwards finds
     // the beginning of the chain, forwards finds the end.  If there's
     // a cycle it can be broken at any point,  so pick an edge and walk
     // backward until the list ends or we end where we started.
     GrowableArray<MoveOperation*>* stores = new GrowableArray<MoveOperation*>();
     for (int e = 0; e < edges.length(); e++) {
       MoveOperation* s = edges.at(e);
       if (!s->is_processed()) {
         MoveOperation* start = s;
         // search for the beginning of the chain or cycle
         while (start->prev() != NULL && start->prev() != s) {
           start = start->prev();
         }
         if (start->prev() == s) {
           start->break_cycle(temp_register);
         }
         // walk the chain forward inserting to store list
         while (start != NULL) {
           stores->append(start);
           start->set_processed();
           start = start->next();
         }
       }
     }
     return stores;
   }
 };
 static void verify_oop_args(MacroAssembler* masm,
                             methodHandle method,
                             const BasicType* sig_bt,
                             const VMRegPair* regs) {
   Register temp_reg = rbx;  // not part of any compiled calling seq
   if (VerifyOops) {
     for (int i = 0; i < method->size_of_parameters(); i++) {
       if (sig_bt[i] == T_OBJECT ||
           sig_bt[i] == T_ARRAY) {
         VMReg r = regs[i].first();
         assert(r->is_valid(), "bad oop arg");
         if (r->is_stack()) {
           __ movptr(temp_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
           __ verify_oop(temp_reg);
         } else {
           __ verify_oop(r->as_Register());
         }
       }
     }
   }
 }
 static void gen_special_dispatch(MacroAssembler* masm,
                                  methodHandle method,
                                  const BasicType* sig_bt,
                                  const VMRegPair* regs) {
   verify_oop_args(masm, method, sig_bt, regs);
   vmIntrinsics::ID iid = method->intrinsic_id();
   // Now write the args into the outgoing interpreter space
   bool     has_receiver   = false;
   Register receiver_reg   = noreg;
   int      member_arg_pos = -1;
   Register member_reg     = noreg;
   int      ref_kind       = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid);
   if (ref_kind != 0) {
     member_arg_pos = method->size_of_parameters() - 1;  // trailing MemberName argument
     member_reg = rbx;  // known to be free at this point
     has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind);
   } else if (iid == vmIntrinsics::_invokeBasic) {
     has_receiver = true;
   } else {
     fatal(err_msg_res("unexpected intrinsic id %d", iid));
   }
   if (member_reg != noreg) {
     // Load the member_arg into register, if necessary.
     SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs);
     VMReg r = regs[member_arg_pos].first();
     if (r->is_stack()) {
       __ movptr(member_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
     } else {
       // no data motion is needed
       member_reg = r->as_Register();
     }
   }
   if (has_receiver) {
     // Make sure the receiver is loaded into a register.
     assert(method->size_of_parameters() > 0, "oob");
     assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object");
     VMReg r = regs[0].first();
     assert(r->is_valid(), "bad receiver arg");
     if (r->is_stack()) {
       // Porting note:  This assumes that compiled calling conventions always
       // pass the receiver oop in a register.  If this is not true on some
       // platform, pick a temp and load the receiver from stack.
       fatal("receiver always in a register");
       receiver_reg = j_rarg0;  // known to be free at this point
       __ movptr(receiver_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
     } else {
       // no data motion is needed
       receiver_reg = r->as_Register();
     }
   }
   // Figure out which address we are really jumping to:
   MethodHandles::generate_method_handle_dispatch(masm, iid,
                                                  receiver_reg, member_reg, /*for_compiler_entry:*/ true);
 }
 // ---------------------------------------------------------------------------
 // Generate a native wrapper for a given method.  The method takes arguments
 // in the Java compiled code convention, marshals them to the native
 // convention (handlizes oops, etc), transitions to native, makes the call,
 // returns to java state (possibly blocking), unhandlizes any result and
 // returns.
 //
 // Critical native functions are a shorthand for the use of
 // GetPrimtiveArrayCritical and disallow the use of any other JNI
 // functions.  The wrapper is expected to unpack the arguments before
 // passing them to the callee and perform checks before and after the
 // native call to ensure that they GC_locker
 // lock_critical/unlock_critical semantics are followed.  Some other
 // parts of JNI setup are skipped like the tear down of the JNI handle
 // block and the check for pending exceptions it's impossible for them
 // to be thrown.
 //
 // They are roughly structured like this:
 //    if (GC_locker::needs_gc())
 //      SharedRuntime::block_for_jni_critical();
 //    tranistion to thread_in_native
 //    unpack arrray arguments and call native entry point
 //    check for safepoint in progress
 //    check if any thread suspend flags are set
 //      call into JVM and possible unlock the JNI critical
 //      if a GC was suppressed while in the critical native.
 //    transition back to thread_in_Java
 //    return to caller
 //
 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm,
                                                 methodHandle method,
                                                 int compile_id,
                                                 BasicType* in_sig_bt,
                                                 VMRegPair* in_regs,
                                                 BasicType ret_type) {
   if (method->is_method_handle_intrinsic()) {
     vmIntrinsics::ID iid = method->intrinsic_id();
     intptr_t start = (intptr_t)__ pc();
     int vep_offset = ((intptr_t)__ pc()) - start;
     gen_special_dispatch(masm,
                          method,
                          in_sig_bt,
                          in_regs);
     int frame_complete = ((intptr_t)__ pc()) - start;  // not complete, period
     __ flush();
     int stack_slots = SharedRuntime::out_preserve_stack_slots();  // no out slots at all, actually
     return nmethod::new_native_nmethod(method,
                                        compile_id,
                                        masm->code(),
                                        vep_offset,
                                        frame_complete,
                                        stack_slots / VMRegImpl::slots_per_word,
                                        in_ByteSize(-1),
                                        in_ByteSize(-1),
                                        (OopMapSet*)NULL);
   }
   bool is_critical_native = true;
   address native_func = method->critical_native_function();
   if (native_func == NULL) {
     native_func = method->native_function();
     is_critical_native = false;
   }
   assert(native_func != NULL, "must have function");
   // An OopMap for lock (and class if static)
   OopMapSet *oop_maps = new OopMapSet();
   intptr_t start = (intptr_t)__ pc();
   // We have received a description of where all the java arg are located
   // on entry to the wrapper. We need to convert these args to where
   // the jni function will expect them. To figure out where they go
   // we convert the java signature to a C signature by inserting
   // the hidden arguments as arg[0] and possibly arg[1] (static method)
   const int total_in_args = method->size_of_parameters();
   int total_c_args = total_in_args;
   if (!is_critical_native) {
     total_c_args += 1;
     if (method->is_static()) {
       total_c_args++;
     }
   } else {
     for (int i = 0; i < total_in_args; i++) {
       if (in_sig_bt[i] == T_ARRAY) {
         total_c_args++;
       }
     }
   }
   BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
   VMRegPair* out_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
   BasicType* in_elem_bt = NULL;
   int argc = 0;
   if (!is_critical_native) {
     out_sig_bt[argc++] = T_ADDRESS;
     if (method->is_static()) {
       out_sig_bt[argc++] = T_OBJECT;
     }
     for (int i = 0; i < total_in_args ; i++ ) {
       out_sig_bt[argc++] = in_sig_bt[i];
     }
   } else {
     Thread* THREAD = Thread::current();
     in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args);
     SignatureStream ss(method->signature());
     for (int i = 0; i < total_in_args ; i++ ) {
       if (in_sig_bt[i] == T_ARRAY) {
         // Arrays are passed as int, elem* pair
         out_sig_bt[argc++] = T_INT;
         out_sig_bt[argc++] = T_ADDRESS;
         Symbol* atype = ss.as_symbol(CHECK_NULL);
         const char* at = atype->as_C_string();
         if (strlen(at) == 2) {
           assert(at[0] == '[', "must be");
           switch (at[1]) {
             case 'B': in_elem_bt[i]  = T_BYTE; break;
             case 'C': in_elem_bt[i]  = T_CHAR; break;
             case 'D': in_elem_bt[i]  = T_DOUBLE; break;
             case 'F': in_elem_bt[i]  = T_FLOAT; break;
             case 'I': in_elem_bt[i]  = T_INT; break;
             case 'J': in_elem_bt[i]  = T_LONG; break;
             case 'S': in_elem_bt[i]  = T_SHORT; break;
             case 'Z': in_elem_bt[i]  = T_BOOLEAN; break;
             default: ShouldNotReachHere();
           }
         }
       } else {
         out_sig_bt[argc++] = in_sig_bt[i];
         in_elem_bt[i] = T_VOID;
       }
       if (in_sig_bt[i] != T_VOID) {
         assert(in_sig_bt[i] == ss.type(), "must match");
         ss.next();
       }
     }
   }
   // Now figure out where the args must be stored and how much stack space
   // they require.
   int out_arg_slots;
   out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
   // Compute framesize for the wrapper.  We need to handlize all oops in
   // incoming registers
   // Calculate the total number of stack slots we will need.
   // First count the abi requirement plus all of the outgoing args
   int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
   // Now the space for the inbound oop handle area
   int total_save_slots = 6 * VMRegImpl::slots_per_word;  // 6 arguments passed in registers
   if (is_critical_native) {
     // Critical natives may have to call out so they need a save area
     // for register arguments.
     int double_slots = 0;
     int single_slots = 0;
     for ( int i = 0; i < total_in_args; i++) {
       if (in_regs[i].first()->is_Register()) {
         const Register reg = in_regs[i].first()->as_Register();
         switch (in_sig_bt[i]) {
           case T_BOOLEAN:
           case T_BYTE:
           case T_SHORT:
           case T_CHAR:
           case T_INT:  single_slots++; break;
           case T_ARRAY:  // specific to LP64 (7145024)
           case T_LONG: double_slots++; break;
           default:  ShouldNotReachHere();
         }
       } else if (in_regs[i].first()->is_XMMRegister()) {
         switch (in_sig_bt[i]) {
           case T_FLOAT:  single_slots++; break;
           case T_DOUBLE: double_slots++; break;
           default:  ShouldNotReachHere();
         }
       } else if (in_regs[i].first()->is_FloatRegister()) {
         ShouldNotReachHere();
       }
     }
     total_save_slots = double_slots * 2 + single_slots;
     // align the save area
     if (double_slots != 0) {
       stack_slots = round_to(stack_slots, 2);
     }
   }
   int oop_handle_offset = stack_slots;
   stack_slots += total_save_slots;
   // Now any space we need for handlizing a klass if static method
   int klass_slot_offset = 0;
   int klass_offset = -1;
   int lock_slot_offset = 0;
   bool is_static = false;
   if (method->is_static()) {
     klass_slot_offset = stack_slots;
     stack_slots += VMRegImpl::slots_per_word;
     klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
     is_static = true;
   }
   // Plus a lock if needed
   if (method->is_synchronized()) {
     lock_slot_offset = stack_slots;
     stack_slots += VMRegImpl::slots_per_word;
   }
   // Now a place (+2) to save return values or temp during shuffling
   // + 4 for return address (which we own) and saved rbp
   stack_slots += 6;
   // Ok The space we have allocated will look like:
   //
   //
   // FP-> |                     |
   //      |---------------------|
   //      | 2 slots for moves   |
   //      |---------------------|
   //      | lock box (if sync)  |
   //      |---------------------| <- lock_slot_offset
   //      | klass (if static)   |
   //      |---------------------| <- klass_slot_offset
   //      | oopHandle area      |
   //      |---------------------| <- oop_handle_offset (6 java arg registers)
   //      | outbound memory     |
   //      | based arguments     |
   //      |                     |
   //      |---------------------|
   //      |                     |
   // SP-> | out_preserved_slots |
   //
   //
   // Now compute actual number of stack words we need rounding to make
   // stack properly aligned.
   stack_slots = round_to(stack_slots, StackAlignmentInSlots);
   int stack_size = stack_slots * VMRegImpl::stack_slot_size;
   // First thing make an ic check to see if we should even be here
   // We are free to use all registers as temps without saving them and
   // restoring them except rbp. rbp is the only callee save register
   // as far as the interpreter and the compiler(s) are concerned.
   const Register ic_reg = rax;
   const Register receiver = j_rarg0;
   Label hit;
   Label exception_pending;
   assert_different_registers(ic_reg, receiver, rscratch1);
   __ verify_oop(receiver);
   __ load_klass(rscratch1, receiver);
   __ cmpq(ic_reg, rscratch1);
   __ jcc(Assembler::equal, hit);
   __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
   // Verified entry point must be aligned
   __ align(8);
   __ bind(hit);
   int vep_offset = ((intptr_t)__ pc()) - start;
   // The instruction at the verified entry point must be 5 bytes or longer
   // because it can be patched on the fly by make_non_entrant. The stack bang
   // instruction fits that requirement.
   // Generate stack overflow check
   if (UseStackBanging) {
     __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
   } else {
     // need a 5 byte instruction to allow MT safe patching to non-entrant
     __ fat_nop();
   }
   // Generate a new frame for the wrapper.
   __ enter();
   // -2 because return address is already present and so is saved rbp
   __ subptr(rsp, stack_size - 2*wordSize);
   // Frame is now completed as far as size and linkage.
   int frame_complete = ((intptr_t)__ pc()) - start;
     if (UseRTMLocking) {
       // Abort RTM transaction before calling JNI
       // because critical section will be large and will be
       // aborted anyway. Also nmethod could be deoptimized.
       __ xabort(0);
     }
 #ifdef ASSERT
     {
       Label L;
       __ mov(rax, rsp);
       __ andptr(rax, -16); // must be 16 byte boundary (see amd64 ABI)
       __ cmpptr(rax, rsp);
       __ jcc(Assembler::equal, L);
       __ stop("improperly aligned stack");
       __ bind(L);
     }
 #endif /* ASSERT */
   // We use r14 as the oop handle for the receiver/klass
   // It is callee save so it survives the call to native
   const Register oop_handle_reg = r14;
   if (is_critical_native) {
     check_needs_gc_for_critical_native(masm, stack_slots, total_c_args, total_in_args,
                                        oop_handle_offset, oop_maps, in_regs, in_sig_bt);
   }
   //
   // We immediately shuffle the arguments so that any vm call we have to
   // make from here on out (sync slow path, jvmti, etc.) we will have
   // captured the oops from our caller and have a valid oopMap for
   // them.
   // -----------------
   // The Grand Shuffle
   // The Java calling convention is either equal (linux) or denser (win64) than the
   // c calling convention. However the because of the jni_env argument the c calling
   // convention always has at least one more (and two for static) arguments than Java.
   // Therefore if we move the args from java -> c backwards then we will never have
   // a register->register conflict and we don't have to build a dependency graph
   // and figure out how to break any cycles.
   //
   // Record esp-based slot for receiver on stack for non-static methods
   int receiver_offset = -1;
   // This is a trick. We double the stack slots so we can claim
   // the oops in the caller's frame. Since we are sure to have
   // more args than the caller doubling is enough to make
   // sure we can capture all the incoming oop args from the
   // caller.
   //
   OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
   // Mark location of rbp (someday)
   // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, vmreg(rbp));
   // Use eax, ebx as temporaries during any memory-memory moves we have to do
   // All inbound args are referenced based on rbp and all outbound args via rsp.
 #ifdef ASSERT
   bool reg_destroyed[RegisterImpl::number_of_registers];
   bool freg_destroyed[XMMRegisterImpl::number_of_registers];
   for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {
     reg_destroyed[r] = false;
   }
   for ( int f = 0 ; f < XMMRegisterImpl::number_of_registers ; f++ ) {
     freg_destroyed[f] = false;
   }
 #endif /* ASSERT */
   // This may iterate in two different directions depending on the
   // kind of native it is.  The reason is that for regular JNI natives
   // the incoming and outgoing registers are offset upwards and for
   // critical natives they are offset down.
   GrowableArray<int> arg_order(2 * total_in_args);
   VMRegPair tmp_vmreg;
   tmp_vmreg.set2(rbx->as_VMReg());
   if (!is_critical_native) {
     for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {
       arg_order.push(i);
       arg_order.push(c_arg);
     }
   } else {
     // Compute a valid move order, using tmp_vmreg to break any cycles
     ComputeMoveOrder cmo(total_in_args, in_regs, total_c_args, out_regs, in_sig_bt, arg_order, tmp_vmreg);
   }
   int temploc = -1;
   for (int ai = 0; ai < arg_order.length(); ai += 2) {
     int i = arg_order.at(ai);
     int c_arg = arg_order.at(ai + 1);
     __ block_comment(err_msg("move %d -> %d", i, c_arg));
     if (c_arg == -1) {
       assert(is_critical_native, "should only be required for critical natives");
       // This arg needs to be moved to a temporary
       __ mov(tmp_vmreg.first()->as_Register(), in_regs[i].first()->as_Register());
       in_regs[i] = tmp_vmreg;
       temploc = i;
       continue;
     } else if (i == -1) {
       assert(is_critical_native, "should only be required for critical natives");
       // Read from the temporary location
       assert(temploc != -1, "must be valid");
       i = temploc;
       temploc = -1;
     }
 #ifdef ASSERT
     if (in_regs[i].first()->is_Register()) {
       assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "destroyed reg!");
     } else if (in_regs[i].first()->is_XMMRegister()) {
       assert(!freg_destroyed[in_regs[i].first()->as_XMMRegister()->encoding()], "destroyed reg!");
     }
     if (out_regs[c_arg].first()->is_Register()) {
       reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
     } else if (out_regs[c_arg].first()->is_XMMRegister()) {
       freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;
     }
 #endif /* ASSERT */
     switch (in_sig_bt[i]) {
       case T_ARRAY:
         if (is_critical_native) {
           unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg + 1], out_regs[c_arg]);
           c_arg++;
 #ifdef ASSERT
           if (out_regs[c_arg].first()->is_Register()) {
             reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
           } else if (out_regs[c_arg].first()->is_XMMRegister()) {
             freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;
           }
 #endif
           break;
         }
       case T_OBJECT:
         assert(!is_critical_native, "no oop arguments");
         object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
                     ((i == 0) && (!is_static)),
                     &receiver_offset);
         break;
       case T_VOID:
         break;
       case T_FLOAT:
         float_move(masm, in_regs[i], out_regs[c_arg]);
           break;
       case T_DOUBLE:
         assert( i + 1 < total_in_args &&
                 in_sig_bt[i + 1] == T_VOID &&
                 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
         double_move(masm, in_regs[i], out_regs[c_arg]);
         break;
       case T_LONG :
         long_move(masm, in_regs[i], out_regs[c_arg]);
         break;
       case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
       default:
         move32_64(masm, in_regs[i], out_regs[c_arg]);
     }
   }
   int c_arg;
   // Pre-load a static method's oop into r14.  Used both by locking code and
   // the normal JNI call code.
   if (!is_critical_native) {
     // point c_arg at the first arg that is already loaded in case we
     // need to spill before we call out
     c_arg = total_c_args - total_in_args;
     if (method->is_static()) {
       //  load oop into a register
       __ movoop(oop_handle_reg, JNIHandles::make_local(method->method_holder()->java_mirror()));
       // Now handlize the static class mirror it's known not-null.
       __ movptr(Address(rsp, klass_offset), oop_handle_reg);
       map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
       // Now get the handle
       __ lea(oop_handle_reg, Address(rsp, klass_offset));
       // store the klass handle as second argument
       __ movptr(c_rarg1, oop_handle_reg);
       // and protect the arg if we must spill
       c_arg--;
     }
   } else {
     // For JNI critical methods we need to save all registers in save_args.
     c_arg = 0;
   }
   // Change state to native (we save the return address in the thread, since it might not
   // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
   // points into the right code segment. It does not have to be the correct return pc.
   // We use the same pc/oopMap repeatedly when we call out
   intptr_t the_pc = (intptr_t) __ pc();
   oop_maps->add_gc_map(the_pc - start, map);
   __ set_last_Java_frame(rsp, noreg, (address)the_pc);
   // We have all of the arguments setup at this point. We must not touch any register
   // argument registers at this point (what if we save/restore them there are no oop?
   {
     SkipIfEqual skip(masm, &DTraceMethodProbes, false);
     // protect the args we've loaded
     save_args(masm, total_c_args, c_arg, out_regs);
     __ mov_metadata(c_rarg1, method());
     __ call_VM_leaf(
       CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
       r15_thread, c_rarg1);
     restore_args(masm, total_c_args, c_arg, out_regs);
   }
   // RedefineClasses() tracing support for obsolete method entry
   if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
     // protect the args we've loaded
     save_args(masm, total_c_args, c_arg, out_regs);
     __ mov_metadata(c_rarg1, method());
     __ call_VM_leaf(
       CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
       r15_thread, c_rarg1);
     restore_args(masm, total_c_args, c_arg, out_regs);
   }
   // Lock a synchronized method
   // Register definitions used by locking and unlocking
   const Register swap_reg = rax;  // Must use rax for cmpxchg instruction
   const Register obj_reg  = rbx;  // Will contain the oop
   const Register lock_reg = r13;  // Address of compiler lock object (BasicLock)
   const Register old_hdr  = r13;  // value of old header at unlock time
   Label slow_path_lock;
   Label lock_done;
   if (method->is_synchronized()) {
     assert(!is_critical_native, "unhandled");
     const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();
     // Get the handle (the 2nd argument)
     __ mov(oop_handle_reg, c_rarg1);
     // Get address of the box
     __ lea(lock_reg, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
     // Load the oop from the handle
     __ movptr(obj_reg, Address(oop_handle_reg, 0));
     if (UseBiasedLocking) {
       __ biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, lock_done, &slow_path_lock);
     }
     // Load immediate 1 into swap_reg %rax
     __ movl(swap_reg, 1);
     // Load (object->mark() | 1) into swap_reg %rax
     __ orptr(swap_reg, Address(obj_reg, 0));
     // Save (object->mark() | 1) into BasicLock's displaced header
     __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
     if (os::is_MP()) {
       __ lock();
     }
     // src -> dest iff dest == rax else rax <- dest
     __ cmpxchgptr(lock_reg, Address(obj_reg, 0));
     __ jcc(Assembler::equal, lock_done);
     // Hmm should this move to the slow path code area???
     // Test if the oopMark is an obvious stack pointer, i.e.,
     //  1) (mark & 3) == 0, and
     //  2) rsp <= mark < mark + os::pagesize()
     // These 3 tests can be done by evaluating the following
     // expression: ((mark - rsp) & (3 - os::vm_page_size())),
     // assuming both stack pointer and pagesize have their
     // least significant 2 bits clear.
     // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg
     __ subptr(swap_reg, rsp);
     __ andptr(swap_reg, 3 - os::vm_page_size());
     // Save the test result, for recursive case, the result is zero
     __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
     __ jcc(Assembler::notEqual, slow_path_lock);
     // Slow path will re-enter here
     __ bind(lock_done);
   }
   // Finally just about ready to make the JNI call
   // get JNIEnv* which is first argument to native
   if (!is_critical_native) {
     __ lea(c_rarg0, Address(r15_thread, in_bytes(JavaThread::jni_environment_offset())));
   }
   // Now set thread in native
   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native);
   __ call(RuntimeAddress(native_func));
   // Verify or restore cpu control state after JNI call
   __ restore_cpu_control_state_after_jni();
   // Unpack native results.
   switch (ret_type) {
   case T_BOOLEAN: __ c2bool(rax);            break;
   case T_CHAR   : __ movzwl(rax, rax);      break;
   case T_BYTE   : __ sign_extend_byte (rax); break;
   case T_SHORT  : __ sign_extend_short(rax); break;
   case T_INT    : /* nothing to do */        break;
   case T_DOUBLE :
   case T_FLOAT  :
     // Result is in xmm0 we'll save as needed
     break;
   case T_ARRAY:                 // Really a handle
   case T_OBJECT:                // Really a handle
       break; // can't de-handlize until after safepoint check
   case T_VOID: break;
   case T_LONG: break;
   default       : ShouldNotReachHere();
   }
   // Switch thread to "native transition" state before reading the synchronization state.
   // This additional state is necessary because reading and testing the synchronization
   // state is not atomic w.r.t. GC, as this scenario demonstrates:
   //     Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
   //     VM thread changes sync state to synchronizing and suspends threads for GC.
   //     Thread A is resumed to finish this native method, but doesn't block here since it
   //     didn't see any synchronization is progress, and escapes.
   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
   if(os::is_MP()) {
     if (UseMembar) {
       // Force this write out before the read below
       __ membar(Assembler::Membar_mask_bits(
            Assembler::LoadLoad | Assembler::LoadStore |
            Assembler::StoreLoad | Assembler::StoreStore));
     } else {
       // Write serialization page so VM thread can do a pseudo remote membar.
       // We use the current thread pointer to calculate a thread specific
       // offset to write to within the page. This minimizes bus traffic
       // due to cache line collision.
       __ serialize_memory(r15_thread, rcx);
     }
   }
   Label after_transition;
   // check for safepoint operation in progress and/or pending suspend requests
   {
     Label Continue;
     __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
              SafepointSynchronize::_not_synchronized);
     Label L;
     __ jcc(Assembler::notEqual, L);
     __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
     __ jcc(Assembler::equal, Continue);
     __ bind(L);
     // Don't use call_VM as it will see a possible pending exception and forward it
     // and never return here preventing us from clearing _last_native_pc down below.
     // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
     // preserved and correspond to the bcp/locals pointers. So we do a runtime call
     // by hand.
     //
     save_native_result(masm, ret_type, stack_slots);
     __ mov(c_rarg0, r15_thread);
     __ mov(r12, rsp); // remember sp
     __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
     __ andptr(rsp, -16); // align stack as required by ABI
     if (!is_critical_native) {
       __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
     } else {
       __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans_and_transition)));
     }
     __ mov(rsp, r12); // restore sp
     __ reinit_heapbase();
     // Restore any method result value
     restore_native_result(masm, ret_type, stack_slots);
     if (is_critical_native) {
       // The call above performed the transition to thread_in_Java so
       // skip the transition logic below.
       __ jmpb(after_transition);
     }
     __ bind(Continue);
   }
   // change thread state
   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
   __ bind(after_transition);
   Label reguard;
   Label reguard_done;
   __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
   __ jcc(Assembler::equal, reguard);
   __ bind(reguard_done);
   // native result if any is live
   // Unlock
   Label unlock_done;
   Label slow_path_unlock;
   if (method->is_synchronized()) {
     // Get locked oop from the handle we passed to jni
     __ movptr(obj_reg, Address(oop_handle_reg, 0));
     Label done;
     if (UseBiasedLocking) {
       __ biased_locking_exit(obj_reg, old_hdr, done);
     }
     // Simple recursive lock?
     __ cmpptr(Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size), (int32_t)NULL_WORD);
     __ jcc(Assembler::equal, done);
     // Must save rax if if it is live now because cmpxchg must use it
     if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
       save_native_result(masm, ret_type, stack_slots);
     }
     // get address of the stack lock
     __ lea(rax, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
     //  get old displaced header
     __ movptr(old_hdr, Address(rax, 0));
     // Atomic swap old header if oop still contains the stack lock
     if (os::is_MP()) {
       __ lock();
     }
     __ cmpxchgptr(old_hdr, Address(obj_reg, 0));
     __ jcc(Assembler::notEqual, slow_path_unlock);
     // slow path re-enters here
     __ bind(unlock_done);
     if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
       restore_native_result(masm, ret_type, stack_slots);
     }
     __ bind(done);
   }
   {
     SkipIfEqual skip(masm, &DTraceMethodProbes, false);
     save_native_result(masm, ret_type, stack_slots);
     __ mov_metadata(c_rarg1, method());
     __ call_VM_leaf(
          CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
          r15_thread, c_rarg1);
     restore_native_result(masm, ret_type, stack_slots);
   }
   __ reset_last_Java_frame(false);
   // Unbox oop result, e.g. JNIHandles::resolve value.
   if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
     __ resolve_jobject(rax /* value */,
                        r15_thread /* thread */,
                        rcx /* tmp */);
   }
   if (!is_critical_native) {
     // reset handle block
     __ movptr(rcx, Address(r15_thread, JavaThread::active_handles_offset()));
     __ movl(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
   }
   // pop our frame
   __ leave();
   if (!is_critical_native) {
     // Any exception pending?
     __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
     __ jcc(Assembler::notEqual, exception_pending);
   }
   // Return
   __ ret(0);
   // Unexpected paths are out of line and go here
   if (!is_critical_native) {
     // forward the exception
     __ bind(exception_pending);
     // and forward the exception
     __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
   }
   // Slow path locking & unlocking
   if (method->is_synchronized()) {
     // BEGIN Slow path lock
     __ bind(slow_path_lock);
     // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
     // args are (oop obj, BasicLock* lock, JavaThread* thread)
     // protect the args we've loaded
     save_args(masm, total_c_args, c_arg, out_regs);
     __ mov(c_rarg0, obj_reg);
     __ mov(c_rarg1, lock_reg);
     __ mov(c_rarg2, r15_thread);
     // Not a leaf but we have last_Java_frame setup as we want
     __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), 3);
     restore_args(masm, total_c_args, c_arg, out_regs);
 #ifdef ASSERT
     { Label L;
     __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
     __ jcc(Assembler::equal, L);
     __ stop("no pending exception allowed on exit from monitorenter");
     __ bind(L);
     }
 #endif
     __ jmp(lock_done);
     // END Slow path lock
     // BEGIN Slow path unlock
     __ bind(slow_path_unlock);
     // If we haven't already saved the native result we must save it now as xmm registers
     // are still exposed.
     if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
       save_native_result(masm, ret_type, stack_slots);
     }
     __ lea(c_rarg1, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
     __ mov(c_rarg0, obj_reg);
     __ mov(r12, rsp); // remember sp
     __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
     __ andptr(rsp, -16); // align stack as required by ABI
     // Save pending exception around call to VM (which contains an EXCEPTION_MARK)
     // NOTE that obj_reg == rbx currently
     __ movptr(rbx, Address(r15_thread, in_bytes(Thread::pending_exception_offset())));
     __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
     __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
     __ mov(rsp, r12); // restore sp
     __ reinit_heapbase();
 #ifdef ASSERT
     {
       Label L;
       __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
       __ jcc(Assembler::equal, L);
       __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
       __ bind(L);
     }
 #endif /* ASSERT */
     __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), rbx);
     if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
       restore_native_result(masm, ret_type, stack_slots);
     }
     __ jmp(unlock_done);
     // END Slow path unlock
   } // synchronized
   // SLOW PATH Reguard the stack if needed
   __ bind(reguard);
   save_native_result(masm, ret_type, stack_slots);
   __ mov(r12, rsp); // remember sp
   __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
   __ andptr(rsp, -16); // align stack as required by ABI
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
   __ mov(rsp, r12); // restore sp
   __ reinit_heapbase();
   restore_native_result(masm, ret_type, stack_slots);
   // and continue
   __ jmp(reguard_done);
   __ flush();
   nmethod *nm = nmethod::new_native_nmethod(method,
                                             compile_id,
                                             masm->code(),
                                             vep_offset,
                                             frame_complete,
                                             stack_slots / VMRegImpl::slots_per_word,
                                             (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
                                             in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
                                             oop_maps);
   if (is_critical_native) {
     nm->set_lazy_critical_native(true);
   }
   return nm;
 }
 #ifdef HAVE_DTRACE_H
 // ---------------------------------------------------------------------------
 // Generate a dtrace nmethod for a given signature.  The method takes arguments
 // in the Java compiled code convention, marshals them to the native
 // abi and then leaves nops at the position you would expect to call a native
 // function. When the probe is enabled the nops are replaced with a trap
 // instruction that dtrace inserts and the trace will cause a notification
 // to dtrace.
 //
 // The probes are only able to take primitive types and java/lang/String as
 // arguments.  No other java types are allowed. Strings are converted to utf8
 // strings so that from dtrace point of view java strings are converted to C
 // strings. There is an arbitrary fixed limit on the total space that a method
 // can use for converting the strings. (256 chars per string in the signature).
 // So any java string larger then this is truncated.
 static int  fp_offset[ConcreteRegisterImpl::number_of_registers] = { 0 };
 static bool offsets_initialized = false;
 nmethod *SharedRuntime::generate_dtrace_nmethod(MacroAssembler *masm,
                                                 methodHandle method) {
   // generate_dtrace_nmethod is guarded by a mutex so we are sure to
   // be single threaded in this method.
   assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");
   if (!offsets_initialized) {
     fp_offset[c_rarg0->as_VMReg()->value()] = -1 * wordSize;
     fp_offset[c_rarg1->as_VMReg()->value()] = -2 * wordSize;
     fp_offset[c_rarg2->as_VMReg()->value()] = -3 * wordSize;
     fp_offset[c_rarg3->as_VMReg()->value()] = -4 * wordSize;
     fp_offset[c_rarg4->as_VMReg()->value()] = -5 * wordSize;
     fp_offset[c_rarg5->as_VMReg()->value()] = -6 * wordSize;
     fp_offset[c_farg0->as_VMReg()->value()] = -7 * wordSize;
     fp_offset[c_farg1->as_VMReg()->value()] = -8 * wordSize;
     fp_offset[c_farg2->as_VMReg()->value()] = -9 * wordSize;
     fp_offset[c_farg3->as_VMReg()->value()] = -10 * wordSize;
     fp_offset[c_farg4->as_VMReg()->value()] = -11 * wordSize;
     fp_offset[c_farg5->as_VMReg()->value()] = -12 * wordSize;
     fp_offset[c_farg6->as_VMReg()->value()] = -13 * wordSize;
     fp_offset[c_farg7->as_VMReg()->value()] = -14 * wordSize;
     offsets_initialized = true;
   }
   // Fill in the signature array, for the calling-convention call.
   int total_args_passed = method->size_of_parameters();
   BasicType* in_sig_bt  = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
   VMRegPair  *in_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);
   // The signature we are going to use for the trap that dtrace will see
   // java/lang/String is converted. We drop "this" and any other object
   // is converted to NULL.  (A one-slot java/lang/Long object reference
   // is converted to a two-slot long, which is why we double the allocation).
   BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
   VMRegPair* out_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);
   int i=0;
   int total_strings = 0;
   int first_arg_to_pass = 0;
   int total_c_args = 0;
   // Skip the receiver as dtrace doesn't want to see it
   if( !method->is_static() ) {
     in_sig_bt[i++] = T_OBJECT;
     first_arg_to_pass = 1;
   }
   // We need to convert the java args to where a native (non-jni) function
   // would expect them. To figure out where they go we convert the java
   // signature to a C signature.
   SignatureStream ss(method->signature());
   for ( ; !ss.at_return_type(); ss.next()) {
     BasicType bt = ss.type();
     in_sig_bt[i++] = bt;  // Collect remaining bits of signature
     out_sig_bt[total_c_args++] = bt;
     if( bt == T_OBJECT) {
       Symbol* s = ss.as_symbol_or_null();   // symbol is created
       if (s == vmSymbols::java_lang_String()) {
         total_strings++;
         out_sig_bt[total_c_args-1] = T_ADDRESS;
       } else if (s == vmSymbols::java_lang_Boolean() ||
                  s == vmSymbols::java_lang_Character() ||
                  s == vmSymbols::java_lang_Byte() ||
                  s == vmSymbols::java_lang_Short() ||
                  s == vmSymbols::java_lang_Integer() ||
                  s == vmSymbols::java_lang_Float()) {
         out_sig_bt[total_c_args-1] = T_INT;
       } else if (s == vmSymbols::java_lang_Long() ||
                  s == vmSymbols::java_lang_Double()) {
         out_sig_bt[total_c_args-1] = T_LONG;
         out_sig_bt[total_c_args++] = T_VOID;
       }
     } else if ( bt == T_LONG || bt == T_DOUBLE ) {
       in_sig_bt[i++] = T_VOID;   // Longs & doubles take 2 Java slots
       // We convert double to long
       out_sig_bt[total_c_args-1] = T_LONG;
       out_sig_bt[total_c_args++] = T_VOID;
     } else if ( bt == T_FLOAT) {
       // We convert float to int
       out_sig_bt[total_c_args-1] = T_INT;
     }
   }
   assert(i==total_args_passed, "validly parsed signature");
   // Now get the compiled-Java layout as input arguments
   int comp_args_on_stack;
   comp_args_on_stack = SharedRuntime::java_calling_convention(
       in_sig_bt, in_regs, total_args_passed, false);
   // Now figure out where the args must be stored and how much stack space
   // they require (neglecting out_preserve_stack_slots but space for storing
   // the 1st six register arguments). It's weird see int_stk_helper.
   int out_arg_slots;
   out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
   // Calculate the total number of stack slots we will need.
   // First count the abi requirement plus all of the outgoing args
   int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
   // Now space for the string(s) we must convert
   int* string_locs   = NEW_RESOURCE_ARRAY(int, total_strings + 1);
   for (i = 0; i < total_strings ; i++) {
     string_locs[i] = stack_slots;
     stack_slots += max_dtrace_string_size / VMRegImpl::stack_slot_size;
   }
   // Plus the temps we might need to juggle register args
   // regs take two slots each
   stack_slots += (Argument::n_int_register_parameters_c +
                   Argument::n_float_register_parameters_c) * 2;
   // + 4 for return address (which we own) and saved rbp,
   stack_slots += 4;
   // Ok The space we have allocated will look like:
   //
   //
   // FP-> |                     |
   //      |---------------------|
   //      | string[n]           |
   //      |---------------------| <- string_locs[n]
   //      | string[n-1]         |
   //      |---------------------| <- string_locs[n-1]
   //      | ...                 |
   //      | ...                 |
   //      |---------------------| <- string_locs[1]
   //      | string[0]           |
   //      |---------------------| <- string_locs[0]
   //      | outbound memory     |
   //      | based arguments     |
   //      |                     |
   //      |---------------------|
   //      |                     |
   // SP-> | out_preserved_slots |
   //
   //
   // Now compute actual number of stack words we need rounding to make
   // stack properly aligned.
   stack_slots = round_to(stack_slots, 4 * VMRegImpl::slots_per_word);
   int stack_size = stack_slots * VMRegImpl::stack_slot_size;
   intptr_t start = (intptr_t)__ pc();
   // First thing make an ic check to see if we should even be here
   // We are free to use all registers as temps without saving them and
   // restoring them except rbp. rbp, is the only callee save register
   // as far as the interpreter and the compiler(s) are concerned.
   const Register ic_reg = rax;
   const Register receiver = rcx;
   Label hit;
   Label exception_pending;
   __ verify_oop(receiver);
   __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
   __ jcc(Assembler::equal, hit);
   __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
   // verified entry must be aligned for code patching.
   // and the first 5 bytes must be in the same cache line
   // if we align at 8 then we will be sure 5 bytes are in the same line
   __ align(8);
   __ bind(hit);
   int vep_offset = ((intptr_t)__ pc()) - start;
   // The instruction at the verified entry point must be 5 bytes or longer
   // because it can be patched on the fly by make_non_entrant. The stack bang
   // instruction fits that requirement.
   // Generate stack overflow check
   if (UseStackBanging) {
     if (stack_size <= StackShadowPages*os::vm_page_size()) {
       __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
     } else {
       __ movl(rax, stack_size);
       __ bang_stack_size(rax, rbx);
     }
   } else {
     // need a 5 byte instruction to allow MT safe patching to non-entrant
     __ fat_nop();
   }
   assert(((uintptr_t)__ pc() - start - vep_offset) >= 5,
          "valid size for make_non_entrant");
   // Generate a new frame for the wrapper.
   __ enter();
   // -4 because return address is already present and so is saved rbp,
   if (stack_size - 2*wordSize != 0) {
     __ subq(rsp, stack_size - 2*wordSize);
   }
   // Frame is now completed as far a size and linkage.
   int frame_complete = ((intptr_t)__ pc()) - start;
   int c_arg, j_arg;
   // State of input register args
   bool  live[ConcreteRegisterImpl::number_of_registers];
   live[j_rarg0->as_VMReg()->value()] = false;
   live[j_rarg1->as_VMReg()->value()] = false;
   live[j_rarg2->as_VMReg()->value()] = false;
   live[j_rarg3->as_VMReg()->value()] = false;
   live[j_rarg4->as_VMReg()->value()] = false;
   live[j_rarg5->as_VMReg()->value()] = false;
   live[j_farg0->as_VMReg()->value()] = false;
   live[j_farg1->as_VMReg()->value()] = false;
   live[j_farg2->as_VMReg()->value()] = false;
   live[j_farg3->as_VMReg()->value()] = false;
   live[j_farg4->as_VMReg()->value()] = false;
   live[j_farg5->as_VMReg()->value()] = false;
   live[j_farg6->as_VMReg()->value()] = false;
   live[j_farg7->as_VMReg()->value()] = false;
   bool rax_is_zero = false;
   // All args (except strings) destined for the stack are moved first
   for (j_arg = first_arg_to_pass, c_arg = 0 ;
        j_arg < total_args_passed ; j_arg++, c_arg++ ) {
     VMRegPair src = in_regs[j_arg];
     VMRegPair dst = out_regs[c_arg];
     // Get the real reg value or a dummy (rsp)
     int src_reg = src.first()->is_reg() ?
                   src.first()->value() :
                   rsp->as_VMReg()->value();
     bool useless =  in_sig_bt[j_arg] == T_ARRAY ||
                     (in_sig_bt[j_arg] == T_OBJECT &&
                      out_sig_bt[c_arg] != T_INT &&
                      out_sig_bt[c_arg] != T_ADDRESS &&
                      out_sig_bt[c_arg] != T_LONG);
     live[src_reg] = !useless;
     if (dst.first()->is_stack()) {
       // Even though a string arg in a register is still live after this loop
       // after the string conversion loop (next) it will be dead so we take
       // advantage of that now for simpler code to manage live.
       live[src_reg] = false;
       switch (in_sig_bt[j_arg]) {
         case T_ARRAY:
         case T_OBJECT:
           {
             Address stack_dst(rsp, reg2offset_out(dst.first()));
             if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
               // need to unbox a one-word value
               Register in_reg = rax;
               if ( src.first()->is_reg() ) {
                 in_reg = src.first()->as_Register();
               } else {
                 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
                 rax_is_zero = false;
               }
               Label skipUnbox;
               __ movptr(Address(rsp, reg2offset_out(dst.first())),
                         (int32_t)NULL_WORD);
               __ testq(in_reg, in_reg);
               __ jcc(Assembler::zero, skipUnbox);
               BasicType bt = out_sig_bt[c_arg];
               int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
               Address src1(in_reg, box_offset);
               if ( bt == T_LONG ) {
                 __ movq(in_reg,  src1);
                 __ movq(stack_dst, in_reg);
                 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
                 ++c_arg; // skip over T_VOID to keep the loop indices in sync
               } else {
                 __ movl(in_reg,  src1);
                 __ movl(stack_dst, in_reg);
               }
               __ bind(skipUnbox);
             } else if (out_sig_bt[c_arg] != T_ADDRESS) {
               // Convert the arg to NULL
               if (!rax_is_zero) {
                 __ xorq(rax, rax);
                 rax_is_zero = true;
               }
               __ movq(stack_dst, rax);
             }
           }
           break;
         case T_VOID:
           break;
         case T_FLOAT:
           // This does the right thing since we know it is destined for the
           // stack
           float_move(masm, src, dst);
           break;
         case T_DOUBLE:
           // This does the right thing since we know it is destined for the
           // stack
           double_move(masm, src, dst);
           break;
         case T_LONG :
           long_move(masm, src, dst);
           break;
         case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
         default:
           move32_64(masm, src, dst);
       }
     }
   }
   // If we have any strings we must store any register based arg to the stack
   // This includes any still live xmm registers too.
   int sid = 0;
   if (total_strings > 0 ) {
     for (j_arg = first_arg_to_pass, c_arg = 0 ;
          j_arg < total_args_passed ; j_arg++, c_arg++ ) {
       VMRegPair src = in_regs[j_arg];
       VMRegPair dst = out_regs[c_arg];
       if (src.first()->is_reg()) {
         Address src_tmp(rbp, fp_offset[src.first()->value()]);
         // string oops were left untouched by the previous loop even if the
         // eventual (converted) arg is destined for the stack so park them
         // away now (except for first)
         if (out_sig_bt[c_arg] == T_ADDRESS) {
           Address utf8_addr = Address(
               rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
           if (sid != 1) {
             // The first string arg won't be killed until after the utf8
             // conversion
             __ movq(utf8_addr, src.first()->as_Register());
           }
         } else if (dst.first()->is_reg()) {
           if (in_sig_bt[j_arg] == T_FLOAT || in_sig_bt[j_arg] == T_DOUBLE) {
             // Convert the xmm register to an int and store it in the reserved
             // location for the eventual c register arg
             XMMRegister f = src.first()->as_XMMRegister();
             if (in_sig_bt[j_arg] == T_FLOAT) {
               __ movflt(src_tmp, f);
             } else {
               __ movdbl(src_tmp, f);
             }
           } else {
             // If the arg is an oop type we don't support don't bother to store
             // it remember string was handled above.
             bool useless =  in_sig_bt[j_arg] == T_ARRAY ||
                             (in_sig_bt[j_arg] == T_OBJECT &&
                              out_sig_bt[c_arg] != T_INT &&
                              out_sig_bt[c_arg] != T_LONG);
             if (!useless) {
               __ movq(src_tmp, src.first()->as_Register());
             }
           }
         }
       }
       if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
         assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
         ++c_arg; // skip over T_VOID to keep the loop indices in sync
       }
     }
     // Now that the volatile registers are safe, convert all the strings
     sid = 0;
     for (j_arg = first_arg_to_pass, c_arg = 0 ;
          j_arg < total_args_passed ; j_arg++, c_arg++ ) {
       if (out_sig_bt[c_arg] == T_ADDRESS) {
         // It's a string
         Address utf8_addr = Address(
             rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
         // The first string we find might still be in the original java arg
         // register
         VMReg src = in_regs[j_arg].first();
         // We will need to eventually save the final argument to the trap
         // in the von-volatile location dedicated to src. This is the offset
         // from fp we will use.
         int src_off = src->is_reg() ?
             fp_offset[src->value()] : reg2offset_in(src);
         // This is where the argument will eventually reside
         VMRegPair dst = out_regs[c_arg];
         if (src->is_reg()) {
           if (sid == 1) {
             __ movq(c_rarg0, src->as_Register());
           } else {
             __ movq(c_rarg0, utf8_addr);
           }
         } else {
           // arg is still in the original location
           __ movq(c_rarg0, Address(rbp, reg2offset_in(src)));
         }
         Label done, convert;
         // see if the oop is NULL
         __ testq(c_rarg0, c_rarg0);
         __ jcc(Assembler::notEqual, convert);
         if (dst.first()->is_reg()) {
           // Save the ptr to utf string in the origina src loc or the tmp
           // dedicated to it
           __ movq(Address(rbp, src_off), c_rarg0);
         } else {
           __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg0);
         }
         __ jmp(done);
         __ bind(convert);
         __ lea(c_rarg1, utf8_addr);
         if (dst.first()->is_reg()) {
           __ movq(Address(rbp, src_off), c_rarg1);
         } else {
           __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg1);
         }
         // And do the conversion
         __ call(RuntimeAddress(
                 CAST_FROM_FN_PTR(address, SharedRuntime::get_utf)));
         __ bind(done);
       }
       if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
         assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
         ++c_arg; // skip over T_VOID to keep the loop indices in sync
       }
     }
     // The get_utf call killed all the c_arg registers
     live[c_rarg0->as_VMReg()->value()] = false;
     live[c_rarg1->as_VMReg()->value()] = false;
     live[c_rarg2->as_VMReg()->value()] = false;
     live[c_rarg3->as_VMReg()->value()] = false;
     live[c_rarg4->as_VMReg()->value()] = false;
     live[c_rarg5->as_VMReg()->value()] = false;
     live[c_farg0->as_VMReg()->value()] = false;
     live[c_farg1->as_VMReg()->value()] = false;
     live[c_farg2->as_VMReg()->value()] = false;
     live[c_farg3->as_VMReg()->value()] = false;
     live[c_farg4->as_VMReg()->value()] = false;
     live[c_farg5->as_VMReg()->value()] = false;
     live[c_farg6->as_VMReg()->value()] = false;
     live[c_farg7->as_VMReg()->value()] = false;
   }
   // Now we can finally move the register args to their desired locations
   rax_is_zero = false;
   for (j_arg = first_arg_to_pass, c_arg = 0 ;
        j_arg < total_args_passed ; j_arg++, c_arg++ ) {
     VMRegPair src = in_regs[j_arg];
     VMRegPair dst = out_regs[c_arg];
     // Only need to look for args destined for the interger registers (since we
     // convert float/double args to look like int/long outbound)
     if (dst.first()->is_reg()) {
       Register r =  dst.first()->as_Register();
       // Check if the java arg is unsupported and thereofre useless
       bool useless =  in_sig_bt[j_arg] == T_ARRAY ||
                       (in_sig_bt[j_arg] == T_OBJECT &&
                        out_sig_bt[c_arg] != T_INT &&
                        out_sig_bt[c_arg] != T_ADDRESS &&
                        out_sig_bt[c_arg] != T_LONG);
       // If we're going to kill an existing arg save it first
       if (live[dst.first()->value()]) {
         // you can't kill yourself
         if (src.first() != dst.first()) {
           __ movq(Address(rbp, fp_offset[dst.first()->value()]), r);
         }
       }
       if (src.first()->is_reg()) {
         if (live[src.first()->value()] ) {
           if (in_sig_bt[j_arg] == T_FLOAT) {
             __ movdl(r, src.first()->as_XMMRegister());
           } else if (in_sig_bt[j_arg] == T_DOUBLE) {
             __ movdq(r, src.first()->as_XMMRegister());
           } else if (r != src.first()->as_Register()) {
             if (!useless) {
               __ movq(r, src.first()->as_Register());
             }
           }
         } else {
           // If the arg is an oop type we don't support don't bother to store
           // it
           if (!useless) {
             if (in_sig_bt[j_arg] == T_DOUBLE ||
                 in_sig_bt[j_arg] == T_LONG  ||
                 in_sig_bt[j_arg] == T_OBJECT ) {
               __ movq(r, Address(rbp, fp_offset[src.first()->value()]));
             } else {
               __ movl(r, Address(rbp, fp_offset[src.first()->value()]));
             }
           }
         }
         live[src.first()->value()] = false;
       } else if (!useless) {
         // full sized move even for int should be ok
         __ movq(r, Address(rbp, reg2offset_in(src.first())));
       }
       // At this point r has the original java arg in the final location
       // (assuming it wasn't useless). If the java arg was an oop
       // we have a bit more to do
       if (in_sig_bt[j_arg] == T_ARRAY || in_sig_bt[j_arg] == T_OBJECT ) {
         if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
           // need to unbox a one-word value
           Label skip;
           __ testq(r, r);
           __ jcc(Assembler::equal, skip);
           BasicType bt = out_sig_bt[c_arg];
           int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
           Address src1(r, box_offset);
           if ( bt == T_LONG ) {
             __ movq(r, src1);
           } else {
             __ movl(r, src1);
           }
           __ bind(skip);
         } else if (out_sig_bt[c_arg] != T_ADDRESS) {
           // Convert the arg to NULL
           __ xorq(r, r);
         }
       }
       // dst can longer be holding an input value
       live[dst.first()->value()] = false;
     }
     if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
       assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
       ++c_arg; // skip over T_VOID to keep the loop indices in sync
     }
   }
   // Ok now we are done. Need to place the nop that dtrace wants in order to
   // patch in the trap
   int patch_offset = ((intptr_t)__ pc()) - start;
   __ nop();
   // Return
   __ leave();
   __ ret(0);
   __ flush();
   nmethod *nm = nmethod::new_dtrace_nmethod(
       method, masm->code(), vep_offset, patch_offset, frame_complete,
       stack_slots / VMRegImpl::slots_per_word);
   return nm;
 }
 #endif // HAVE_DTRACE_H
 // this function returns the adjust size (in number of words) to a c2i adapter
 // activation for use during deoptimization
 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
   return (callee_locals - callee_parameters) * Interpreter::stackElementWords;
 }
 uint SharedRuntime::out_preserve_stack_slots() {
   return 0;
 }
 //------------------------------generate_deopt_blob----------------------------
 void SharedRuntime::generate_deopt_blob() {
   // Allocate space for the code
   ResourceMark rm;
   // Setup code generation tools
   CodeBuffer buffer("deopt_blob", 2048, 1024);
   MacroAssembler* masm = new MacroAssembler(&buffer);
   int frame_size_in_words;
   OopMap* map = NULL;
   OopMapSet *oop_maps = new OopMapSet();
   // -------------
   // This code enters when returning to a de-optimized nmethod.  A return
   // address has been pushed on the the stack, and return values are in
   // registers.
   // If we are doing a normal deopt then we were called from the patched
   // nmethod from the point we returned to the nmethod. So the return
   // address on the stack is wrong by NativeCall::instruction_size
   // We will adjust the value so it looks like we have the original return
   // address on the stack (like when we eagerly deoptimized).
   // In the case of an exception pending when deoptimizing, we enter
   // with a return address on the stack that points after the call we patched
   // into the exception handler. We have the following register state from,
   // e.g., the forward exception stub (see stubGenerator_x86_64.cpp).
   //    rax: exception oop
   //    rbx: exception handler
   //    rdx: throwing pc
   // So in this case we simply jam rdx into the useless return address and
   // the stack looks just like we want.
   //
   // At this point we need to de-opt.  We save the argument return
   // registers.  We call the first C routine, fetch_unroll_info().  This
   // routine captures the return values and returns a structure which
   // describes the current frame size and the sizes of all replacement frames.
   // The current frame is compiled code and may contain many inlined
   // functions, each with their own JVM state.  We pop the current frame, then
   // push all the new frames.  Then we call the C routine unpack_frames() to
   // populate these frames.  Finally unpack_frames() returns us the new target
   // address.  Notice that callee-save registers are BLOWN here; they have
   // already been captured in the vframeArray at the time the return PC was
   // patched.
   address start = __ pc();
   Label cont;
   // Prolog for non exception case!
   // Save everything in sight.
   map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
   // Normal deoptimization.  Save exec mode for unpack_frames.
   __ movl(r14, Deoptimization::Unpack_deopt); // callee-saved
   __ jmp(cont);
   int reexecute_offset = __ pc() - start;
   // Reexecute case
   // return address is the pc describes what bci to do re-execute at
   // No need to update map as each call to save_live_registers will produce identical oopmap
   (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
   __ movl(r14, Deoptimization::Unpack_reexecute); // callee-saved
   __ jmp(cont);
   int exception_offset = __ pc() - start;
   // Prolog for exception case
   // all registers are dead at this entry point, except for rax, and
   // rdx which contain the exception oop and exception pc
   // respectively.  Set them in TLS and fall thru to the
   // unpack_with_exception_in_tls entry point.
   __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
   __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), rax);
   int exception_in_tls_offset = __ pc() - start;
   // new implementation because exception oop is now passed in JavaThread
   // Prolog for exception case
   // All registers must be preserved because they might be used by LinearScan
   // Exceptiop oop and throwing PC are passed in JavaThread
   // tos: stack at point of call to method that threw the exception (i.e. only
   // args are on the stack, no return address)
   // make room on stack for the return address
   // It will be patched later with the throwing pc. The correct value is not
   // available now because loading it from memory would destroy registers.
   __ push(0);
   // Save everything in sight.
   map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
   // Now it is safe to overwrite any register
   // Deopt during an exception.  Save exec mode for unpack_frames.
   __ movl(r14, Deoptimization::Unpack_exception); // callee-saved
   // load throwing pc from JavaThread and patch it as the return address
   // of the current frame. Then clear the field in JavaThread
   __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
   __ movptr(Address(rbp, wordSize), rdx);
   __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
 #ifdef ASSERT
   // verify that there is really an exception oop in JavaThread
   __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
   __ verify_oop(rax);
   // verify that there is no pending exception
   Label no_pending_exception;
   __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
   __ testptr(rax, rax);
   __ jcc(Assembler::zero, no_pending_exception);
   __ stop("must not have pending exception here");
   __ bind(no_pending_exception);
 #endif
   __ bind(cont);
   // Call C code.  Need thread and this frame, but NOT official VM entry
   // crud.  We cannot block on this call, no GC can happen.
   //
   // UnrollBlock* fetch_unroll_info(JavaThread* thread)
   // fetch_unroll_info needs to call last_java_frame().
   __ set_last_Java_frame(noreg, noreg, NULL);
 #ifdef ASSERT
   { Label L;
     __ cmpptr(Address(r15_thread,
                     JavaThread::last_Java_fp_offset()),
             (int32_t)0);
     __ jcc(Assembler::equal, L);
     __ stop("SharedRuntime::generate_deopt_blob: last_Java_fp not cleared");
     __ bind(L);
   }
 #endif // ASSERT
   __ mov(c_rarg0, r15_thread);
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));
   // Need to have an oopmap that tells fetch_unroll_info where to
   // find any register it might need.
   oop_maps->add_gc_map(__ pc() - start, map);
   __ reset_last_Java_frame(false);
   // Load UnrollBlock* into rdi
   __ mov(rdi, rax);
    Label noException;
   __ cmpl(r14, Deoptimization::Unpack_exception);   // Was exception pending?
   __ jcc(Assembler::notEqual, noException);
   __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
   // QQQ this is useless it was NULL above
   __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
   __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int32_t)NULL_WORD);
   __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
   __ verify_oop(rax);
   // Overwrite the result registers with the exception results.
   __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
   // I think this is useless
   __ movptr(Address(rsp, RegisterSaver::rdx_offset_in_bytes()), rdx);
   __ bind(noException);
   // Only register save data is on the stack.
   // Now restore the result registers.  Everything else is either dead
   // or captured in the vframeArray.
   RegisterSaver::restore_result_registers(masm);
   // All of the register save area has been popped of the stack. Only the
   // return address remains.
   // Pop all the frames we must move/replace.
   //
   // Frame picture (youngest to oldest)
   // 1: self-frame (no frame link)
   // 2: deopting frame  (no frame link)
   // 3: caller of deopting frame (could be compiled/interpreted).
   //
   // Note: by leaving the return address of self-frame on the stack
   // and using the size of frame 2 to adjust the stack
   // when we are done the return to frame 3 will still be on the stack.
   // Pop deoptimized frame
   __ movl(rcx, Address(rdi, Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
   __ addptr(rsp, rcx);
   // rsp should be pointing at the return address to the caller (3)
   // Pick up the initial fp we should save
   // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
   __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
 #ifdef ASSERT
   // Compilers generate code that bang the stack by as much as the
   // interpreter would need. So this stack banging should never
   // trigger a fault. Verify that it does not on non product builds.
   if (UseStackBanging) {
     __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
     __ bang_stack_size(rbx, rcx);
   }
 #endif
   // Load address of array of frame pcs into rcx
   __ movptr(rcx, Address(rdi, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
   // Trash the old pc
   __ addptr(rsp, wordSize);
   // Load address of array of frame sizes into rsi
   __ movptr(rsi, Address(rdi, Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
   // Load counter into rdx
   __ movl(rdx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
   // Now adjust the caller's stack to make up for the extra locals
   // but record the original sp so that we can save it in the skeletal interpreter
   // frame and the stack walking of interpreter_sender will get the unextended sp
   // value and not the "real" sp value.
   const Register sender_sp = r8;
   __ mov(sender_sp, rsp);
   __ movl(rbx, Address(rdi,
                        Deoptimization::UnrollBlock::
                        caller_adjustment_offset_in_bytes()));
   __ subptr(rsp, rbx);
   // Push interpreter frames in a loop
   Label loop;
   __ bind(loop);
   __ movptr(rbx, Address(rsi, 0));      // Load frame size
 #ifdef CC_INTERP
   __ subptr(rbx, 4*wordSize);           // we'll push pc and ebp by hand and
 #ifdef ASSERT
   __ push(0xDEADDEAD);                  // Make a recognizable pattern
   __ push(0xDEADDEAD);
 #else /* ASSERT */
   __ subptr(rsp, 2*wordSize);           // skip the "static long no_param"
 #endif /* ASSERT */
 #else
   __ subptr(rbx, 2*wordSize);           // We'll push pc and ebp by hand
 #endif // CC_INTERP
   __ pushptr(Address(rcx, 0));          // Save return address
   __ enter();                           // Save old & set new ebp
   __ subptr(rsp, rbx);                  // Prolog
 #ifdef CC_INTERP
   __ movptr(Address(rbp,
                   -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
             sender_sp); // Make it walkable
 #else /* CC_INTERP */
   // This value is corrected by layout_activation_impl
   __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
   __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), sender_sp); // Make it walkable
 #endif /* CC_INTERP */
   __ mov(sender_sp, rsp);               // Pass sender_sp to next frame
   __ addptr(rsi, wordSize);             // Bump array pointer (sizes)
   __ addptr(rcx, wordSize);             // Bump array pointer (pcs)
   __ decrementl(rdx);                   // Decrement counter
   __ jcc(Assembler::notZero, loop);
   __ pushptr(Address(rcx, 0));          // Save final return address
   // Re-push self-frame
   __ enter();                           // Save old & set new ebp
   // Allocate a full sized register save area.
   // Return address and rbp are in place, so we allocate two less words.
   __ subptr(rsp, (frame_size_in_words - 2) * wordSize);
   // Restore frame locals after moving the frame
   __ movdbl(Address(rsp, RegisterSaver::xmm0_offset_in_bytes()), xmm0);
   __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
   // Call C code.  Need thread but NOT official VM entry
   // crud.  We cannot block on this call, no GC can happen.  Call should
   // restore return values to their stack-slots with the new SP.
   //
   // void Deoptimization::unpack_frames(JavaThread* thread, int exec_mode)
   // Use rbp because the frames look interpreted now
   // Save "the_pc" since it cannot easily be retrieved using the last_java_SP after we aligned SP.
   // Don't need the precise return PC here, just precise enough to point into this code blob.
   address the_pc = __ pc();
   __ set_last_Java_frame(noreg, rbp, the_pc);
   __ andptr(rsp, -(StackAlignmentInBytes));  // Fix stack alignment as required by ABI
   __ mov(c_rarg0, r15_thread);
   __ movl(c_rarg1, r14); // second arg: exec_mode
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
   // Revert SP alignment after call since we're going to do some SP relative addressing below
   __ movptr(rsp, Address(r15_thread, JavaThread::last_Java_sp_offset()));
   // Set an oopmap for the call site
   // Use the same PC we used for the last java frame
   oop_maps->add_gc_map(the_pc - start,
                        new OopMap( frame_size_in_words, 0 ));
   // Clear fp AND pc
   __ reset_last_Java_frame(true);
   // Collect return values
   __ movdbl(xmm0, Address(rsp, RegisterSaver::xmm0_offset_in_bytes()));
   __ movptr(rax, Address(rsp, RegisterSaver::rax_offset_in_bytes()));
   // I think this is useless (throwing pc?)
   __ movptr(rdx, Address(rsp, RegisterSaver::rdx_offset_in_bytes()));
   // Pop self-frame.
   __ leave();                           // Epilog
   // Jump to interpreter
   __ ret(0);
   // Make sure all code is generated
   masm->flush();
   _deopt_blob = DeoptimizationBlob::create(&buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
   _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
 }
 #ifdef COMPILER2
 //------------------------------generate_uncommon_trap_blob--------------------
 void SharedRuntime::generate_uncommon_trap_blob() {
   // Allocate space for the code
   ResourceMark rm;
   // Setup code generation tools
   CodeBuffer buffer("uncommon_trap_blob", 2048, 1024);
   MacroAssembler* masm = new MacroAssembler(&buffer);
   assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
   address start = __ pc();
   if (UseRTMLocking) {
     // Abort RTM transaction before possible nmethod deoptimization.
     __ xabort(0);
   }
   // Push self-frame.  We get here with a return address on the
   // stack, so rsp is 8-byte aligned until we allocate our frame.
   __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog!
   // No callee saved registers. rbp is assumed implicitly saved
   __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
   // compiler left unloaded_class_index in j_rarg0 move to where the
   // runtime expects it.
   __ movl(c_rarg1, j_rarg0);
   __ set_last_Java_frame(noreg, noreg, NULL);
   // Call C code.  Need thread but NOT official VM entry
   // crud.  We cannot block on this call, no GC can happen.  Call should
   // capture callee-saved registers as well as return values.
   // Thread is in rdi already.
   //
   // UnrollBlock* uncommon_trap(JavaThread* thread, jint unloaded_class_index);
   __ mov(c_rarg0, r15_thread);
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));
   // Set an oopmap for the call site
   OopMapSet* oop_maps = new OopMapSet();
   OopMap* map = new OopMap(SimpleRuntimeFrame::framesize, 0);
   // location of rbp is known implicitly by the frame sender code
   oop_maps->add_gc_map(__ pc() - start, map);
   __ reset_last_Java_frame(false);
   // Load UnrollBlock* into rdi
   __ mov(rdi, rax);
   // Pop all the frames we must move/replace.
   //
   // Frame picture (youngest to oldest)
   // 1: self-frame (no frame link)
   // 2: deopting frame  (no frame link)
   // 3: caller of deopting frame (could be compiled/interpreted).
   // Pop self-frame.  We have no frame, and must rely only on rax and rsp.
   __ addptr(rsp, (SimpleRuntimeFrame::framesize - 2) << LogBytesPerInt); // Epilog!
   // Pop deoptimized frame (int)
   __ movl(rcx, Address(rdi,
                        Deoptimization::UnrollBlock::
                        size_of_deoptimized_frame_offset_in_bytes()));
   __ addptr(rsp, rcx);
   // rsp should be pointing at the return address to the caller (3)
   // Pick up the initial fp we should save
   // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
   __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
 #ifdef ASSERT
   // Compilers generate code that bang the stack by as much as the
   // interpreter would need. So this stack banging should never
   // trigger a fault. Verify that it does not on non product builds.
   if (UseStackBanging) {
     __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
     __ bang_stack_size(rbx, rcx);
   }
 #endif
   // Load address of array of frame pcs into rcx (address*)
   __ movptr(rcx, Address(rdi, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
   // Trash the return pc
   __ addptr(rsp, wordSize);
   // Load address of array of frame sizes into rsi (intptr_t*)
   __ movptr(rsi, Address(rdi, Deoptimization::UnrollBlock:: frame_sizes_offset_in_bytes()));
   // Counter
   __ movl(rdx, Address(rdi, Deoptimization::UnrollBlock:: number_of_frames_offset_in_bytes())); // (int)
   // Now adjust the caller's stack to make up for the extra locals but
   // record the original sp so that we can save it in the skeletal
   // interpreter frame and the stack walking of interpreter_sender
   // will get the unextended sp value and not the "real" sp value.
   const Register sender_sp = r8;
   __ mov(sender_sp, rsp);
   __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock:: caller_adjustment_offset_in_bytes())); // (int)
   __ subptr(rsp, rbx);
   // Push interpreter frames in a loop
   Label loop;
   __ bind(loop);
   __ movptr(rbx, Address(rsi, 0)); // Load frame size
   __ subptr(rbx, 2 * wordSize);    // We'll push pc and rbp by hand
   __ pushptr(Address(rcx, 0));     // Save return address
   __ enter();                      // Save old & set new rbp
   __ subptr(rsp, rbx);             // Prolog
 #ifdef CC_INTERP
   __ movptr(Address(rbp,
                   -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
             sender_sp); // Make it walkable
 #else // CC_INTERP
   __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize),
             sender_sp);            // Make it walkable
   // This value is corrected by layout_activation_impl
   __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
 #endif // CC_INTERP
   __ mov(sender_sp, rsp);          // Pass sender_sp to next frame
   __ addptr(rsi, wordSize);        // Bump array pointer (sizes)
   __ addptr(rcx, wordSize);        // Bump array pointer (pcs)
   __ decrementl(rdx);              // Decrement counter
   __ jcc(Assembler::notZero, loop);
   __ pushptr(Address(rcx, 0));     // Save final return address
   // Re-push self-frame
   __ enter();                 // Save old & set new rbp
   __ subptr(rsp, (SimpleRuntimeFrame::framesize - 4) << LogBytesPerInt);
                               // Prolog
   // Use rbp because the frames look interpreted now
   // Save "the_pc" since it cannot easily be retrieved using the last_java_SP after we aligned SP.
   // Don't need the precise return PC here, just precise enough to point into this code blob.
   address the_pc = __ pc();
   __ set_last_Java_frame(noreg, rbp, the_pc);
   // Call C code.  Need thread but NOT official VM entry
   // crud.  We cannot block on this call, no GC can happen.  Call should
   // restore return values to their stack-slots with the new SP.
   // Thread is in rdi already.
   //
   // BasicType unpack_frames(JavaThread* thread, int exec_mode);
   __ andptr(rsp, -(StackAlignmentInBytes)); // Align SP as required by ABI
   __ mov(c_rarg0, r15_thread);
   __ movl(c_rarg1, Deoptimization::Unpack_uncommon_trap);
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
   // Set an oopmap for the call site
   // Use the same PC we used for the last java frame
   oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0));
   // Clear fp AND pc
   __ reset_last_Java_frame(true);
   // Pop self-frame.
   __ leave();                 // Epilog
   // Jump to interpreter
   __ ret(0);
   // Make sure all code is generated
   masm->flush();
   _uncommon_trap_blob =  UncommonTrapBlob::create(&buffer, oop_maps,
                                                  SimpleRuntimeFrame::framesize >> 1);
 }
 #endif // COMPILER2
 //------------------------------generate_handler_blob------
 //
 // Generate a special Compile2Runtime blob that saves all registers,
 // and setup oopmap.
 //
 SafepointBlob* SharedRuntime::generate_handler_blob(address call_ptr, int poll_type) {
   assert(StubRoutines::forward_exception_entry() != NULL,
          "must be generated before");
   ResourceMark rm;
   OopMapSet *oop_maps = new OopMapSet();
   OopMap* map;
   // Allocate space for the code.  Setup code generation tools.
   CodeBuffer buffer("handler_blob", 2048, 1024);
   MacroAssembler* masm = new MacroAssembler(&buffer);
   address start   = __ pc();
   address call_pc = NULL;
   int frame_size_in_words;
   bool cause_return = (poll_type == POLL_AT_RETURN);
   bool save_vectors = (poll_type == POLL_AT_VECTOR_LOOP);
   if (UseRTMLocking) {
     // Abort RTM transaction before calling runtime
     // because critical section will be large and will be
     // aborted anyway. Also nmethod could be deoptimized.
     __ xabort(0);
   }
   // Make room for return address (or push it again)
   if (!cause_return) {
     __ push(rbx);
   }
   // Save registers, fpu state, and flags
   map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words, save_vectors);
   // The following is basically a call_VM.  However, we need the precise
   // address of the call in order to generate an oopmap. Hence, we do all the
   // work outselves.
   __ set_last_Java_frame(noreg, noreg, NULL);
   // The return address must always be correct so that frame constructor never
   // sees an invalid pc.
   if (!cause_return) {
     // overwrite the dummy value we pushed on entry
     __ movptr(c_rarg0, Address(r15_thread, JavaThread::saved_exception_pc_offset()));
     __ movptr(Address(rbp, wordSize), c_rarg0);
   }
   // Do the call
   __ mov(c_rarg0, r15_thread);
   __ call(RuntimeAddress(call_ptr));
   // Set an oopmap for the call site.  This oopmap will map all
   // oop-registers and debug-info registers as callee-saved.  This
   // will allow deoptimization at this safepoint to find all possible
   // debug-info recordings, as well as let GC find all oops.
   oop_maps->add_gc_map( __ pc() - start, map);
   Label noException;
   __ reset_last_Java_frame(false);
   __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
   __ jcc(Assembler::equal, noException);
   // Exception pending
   RegisterSaver::restore_live_registers(masm, save_vectors);
   __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
   // No exception case
   __ bind(noException);
   // Normal exit, restore registers and exit.
   RegisterSaver::restore_live_registers(masm, save_vectors);
   __ ret(0);
   // Make sure all code is generated
   masm->flush();
   // Fill-out other meta info
   return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
 }
 //
 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
 //
 // Generate a stub that calls into vm to find out the proper destination
 // of a java call. All the argument registers are live at this point
 // but since this is generic code we don't know what they are and the caller
 // must do any gc of the args.
 //
 RuntimeStub* SharedRuntime::generate_resolve_blob(address destination, const char* name) {
   assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
   // allocate space for the code
   ResourceMark rm;
   CodeBuffer buffer(name, 1000, 512);
   MacroAssembler* masm                = new MacroAssembler(&buffer);
   int frame_size_in_words;
   OopMapSet *oop_maps = new OopMapSet();
   OopMap* map = NULL;
   int start = __ offset();
   map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
   int frame_complete = __ offset();
   __ set_last_Java_frame(noreg, noreg, NULL);
   __ mov(c_rarg0, r15_thread);
   __ call(RuntimeAddress(destination));
   // Set an oopmap for the call site.
   // We need this not only for callee-saved registers, but also for volatile
   // registers that the compiler might be keeping live across a safepoint.
   oop_maps->add_gc_map( __ offset() - start, map);
   // rax contains the address we are going to jump to assuming no exception got installed
   // clear last_Java_sp
   __ reset_last_Java_frame(false);
   // check for pending exceptions
   Label pending;
   __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
   __ jcc(Assembler::notEqual, pending);
   // get the returned Method*
   __ get_vm_result_2(rbx, r15_thread);
   __ movptr(Address(rsp, RegisterSaver::rbx_offset_in_bytes()), rbx);
   __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
   RegisterSaver::restore_live_registers(masm);
   // We are back the the original state on entry and ready to go.
   __ jmp(rax);
   // Pending exception after the safepoint
   __ bind(pending);
   RegisterSaver::restore_live_registers(masm);
   // exception pending => remove activation and forward to exception handler
   __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int)NULL_WORD);
   __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
   __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
   // -------------
   // make sure all code is generated
   masm->flush();
   // return the  blob
   // frame_size_words or bytes??
   return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_in_words, oop_maps, true);
 }
 //------------------------------Montgomery multiplication------------------------
 //
 #ifndef _WINDOWS
 #define ASM_SUBTRACT
 #ifdef ASM_SUBTRACT
 // Subtract 0:b from carry:a.  Return carry.
 static unsigned long
 sub(unsigned long a[], unsigned long b[], unsigned long carry, long len) {
   long i = 0, cnt = len;
   unsigned long tmp;
   asm volatile("clc; "
                "0: ; "
                "mov (%[b], %[i], 8), %[tmp]; "
                "sbb %[tmp], (%[a], %[i], 8); "
                "inc %[i]; dec %[cnt]; "
                "jne 0b; "
                "mov %[carry], %[tmp]; sbb $0, %[tmp]; "
                : [i]"+r"(i), [cnt]"+r"(cnt), [tmp]"=&r"(tmp)
                : [a]"r"(a), [b]"r"(b), [carry]"r"(carry)
                : "memory");
   return tmp;
 }
 #else // ASM_SUBTRACT
 typedef int __attribute__((mode(TI))) int128;
 // Subtract 0:b from carry:a.  Return carry.
 static unsigned long
 sub(unsigned long a[], unsigned long b[], unsigned long carry, int len) {
   int128 tmp = 0;
   int i;
   for (i = 0; i < len; i++) {
     tmp += a[i];
     tmp -= b[i];
     a[i] = tmp;
     tmp >>= 64;
     assert(-1 <= tmp && tmp <= 0, "invariant");
   }
   return tmp + carry;
 }
 #endif // ! ASM_SUBTRACT
 // Multiply (unsigned) Long A by Long B, accumulating the double-
 // length result into the accumulator formed of T0, T1, and T2.
 #define MACC(A, B, T0, T1, T2)                                      \
 do {                                                                \
   unsigned long hi, lo;                                             \
   asm volatile("mul %5; add %%rax, %2; adc %%rdx, %3; adc $0, %4"   \
            : "=&d"(hi), "=a"(lo), "+r"(T0), "+r"(T1), "+g"(T2)      \
            : "r"(A), "a"(B) : "cc");                                \
  } while(0)
 // As above, but add twice the double-length result into the
 // accumulator.
 #define MACC2(A, B, T0, T1, T2)                                     \
 do {                                                                \
   unsigned long hi, lo;                                             \
   asm volatile("mul %5; add %%rax, %2; adc %%rdx, %3; adc $0, %4;"  \
            "add %%rax, %2; adc %%rdx, %3; adc $0, %4"               \
            : "=&d"(hi), "=a"(lo), "+r"(T0), "+r"(T1), "+g"(T2)      \
            : "r"(A), "a"(B) : "cc");                                \
  } while(0)
 // Fast Montgomery multiplication.  The derivation of the algorithm is
 // in  A Cryptographic Library for the Motorola DSP56000,
 // Dusse and Kaliski, Proc. EUROCRYPT 90, pp. 230-237.
 static void __attribute__((noinline))
 montgomery_multiply(unsigned long a[], unsigned long b[], unsigned long n[],
                     unsigned long m[], unsigned long inv, int len) {
   unsigned long t0 = 0, t1 = 0, t2 = 0; // Triple-precision accumulator
   int i;
   assert(inv * n[0] == -1UL, "broken inverse in Montgomery multiply");
   for (i = 0; i < len; i++) {
     int j;
     for (j = 0; j < i; j++) {
       MACC(a[j], b[i-j], t0, t1, t2);
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     MACC(a[i], b[0], t0, t1, t2);
     m[i] = t0 * inv;
     MACC(m[i], n[0], t0, t1, t2);
     assert(t0 == 0, "broken Montgomery multiply");
     t0 = t1; t1 = t2; t2 = 0;
   }
   for (i = len; i < 2*len; i++) {
     int j;
     for (j = i-len+1; j < len; j++) {
       MACC(a[j], b[i-j], t0, t1, t2);
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     m[i-len] = t0;
     t0 = t1; t1 = t2; t2 = 0;
   }
   while (t0)
     t0 = sub(m, n, t0, len);
 }
 // Fast Montgomery squaring.  This uses asymptotically 25% fewer
 // multiplies so it should be up to 25% faster than Montgomery
 // multiplication.  However, its loop control is more complex and it
 // may actually run slower on some machines.
 static void __attribute__((noinline))
 montgomery_square(unsigned long a[], unsigned long n[],
                   unsigned long m[], unsigned long inv, int len) {
   unsigned long t0 = 0, t1 = 0, t2 = 0; // Triple-precision accumulator
   int i;
   assert(inv * n[0] == -1UL, "broken inverse in Montgomery multiply");
   for (i = 0; i < len; i++) {
     int j;
     int end = (i+1)/2;
     for (j = 0; j < end; j++) {
       MACC2(a[j], a[i-j], t0, t1, t2);
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     if ((i & 1) == 0) {
       MACC(a[j], a[j], t0, t1, t2);
     }
     for (; j < i; j++) {
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     m[i] = t0 * inv;
     MACC(m[i], n[0], t0, t1, t2);
     assert(t0 == 0, "broken Montgomery square");
     t0 = t1; t1 = t2; t2 = 0;
   }
   for (i = len; i < 2*len; i++) {
     int start = i-len+1;
     int end = start + (len - start)/2;
     int j;
     for (j = start; j < end; j++) {
       MACC2(a[j], a[i-j], t0, t1, t2);
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     if ((i & 1) == 0) {
       MACC(a[j], a[j], t0, t1, t2);
     }
     for (; j < len; j++) {
       MACC(m[j], n[i-j], t0, t1, t2);
     }
     m[i-len] = t0;
     t0 = t1; t1 = t2; t2 = 0;
   }
   while (t0)
     t0 = sub(m, n, t0, len);
 }
 // Swap words in a longword.
 static unsigned long swap(unsigned long x) {
   return (x << 32) | (x >> 32);
 }
 // Copy len longwords from s to d, word-swapping as we go.  The
 // destination array is reversed.
 static void reverse_words(unsigned long *s, unsigned long *d, int len) {
   d += len;
   while(len-- > 0) {
     d--;
     *d = swap(*s);
     s++;
   }
 }
 // The threshold at which squaring is advantageous was determined
 // experimentally on an i7-3930K (Ivy Bridge) CPU @ 3.5GHz.
 #define MONTGOMERY_SQUARING_THRESHOLD 64
 void SharedRuntime::montgomery_multiply(jint *a_ints, jint *b_ints, jint *n_ints,
                                         jint len, jlong inv,
                                         jint *m_ints) {
   assert(len % 2 == 0, "array length in montgomery_multiply must be even");
   int longwords = len/2;
   // Make very sure we don't use so much space that the stack might
   // overflow.  512 jints corresponds to an 16384-bit integer and
   // will use here a total of 8k bytes of stack space.
   int total_allocation = longwords * sizeof (unsigned long) * 4;
   guarantee(total_allocation <= 8192, "must be");
   unsigned long *scratch = (unsigned long *)alloca(total_allocation);
   // Local scratch arrays
   unsigned long
     *a = scratch + 0 * longwords,
     *b = scratch + 1 * longwords,
     *n = scratch + 2 * longwords,
     *m = scratch + 3 * longwords;
   reverse_words((unsigned long *)a_ints, a, longwords);
   reverse_words((unsigned long *)b_ints, b, longwords);
   reverse_words((unsigned long *)n_ints, n, longwords);
   ::montgomery_multiply(a, b, n, m, (unsigned long)inv, longwords);
   reverse_words(m, (unsigned long *)m_ints, longwords);
 }
 void SharedRuntime::montgomery_square(jint *a_ints, jint *n_ints,
                                       jint len, jlong inv,
                                       jint *m_ints) {
   assert(len % 2 == 0, "array length in montgomery_square must be even");
   int longwords = len/2;
   // Make very sure we don't use so much space that the stack might
   // overflow.  512 jints corresponds to an 16384-bit integer and
   // will use here a total of 6k bytes of stack space.
   int total_allocation = longwords * sizeof (unsigned long) * 3;
   guarantee(total_allocation <= 8192, "must be");
   unsigned long *scratch = (unsigned long *)alloca(total_allocation);
   // Local scratch arrays
   unsigned long
     *a = scratch + 0 * longwords,
     *n = scratch + 1 * longwords,
     *m = scratch + 2 * longwords;
   reverse_words((unsigned long *)a_ints, a, longwords);
   reverse_words((unsigned long *)n_ints, n, longwords);
   //montgomery_square fails to pass BigIntegerTest on solaris amd64
   //on jdk7 and jdk8.
 #ifndef SOLARIS
   if (len >= MONTGOMERY_SQUARING_THRESHOLD) {
 #else
   if (0) {
 #endif
     ::montgomery_square(a, n, m, (unsigned long)inv, longwords);
   } else {
     ::montgomery_multiply(a, a, n, m, (unsigned long)inv, longwords);
   }
   reverse_words(m, (unsigned long *)m_ints, longwords);
 }
 #endif // WINDOWS
 #ifdef COMPILER2
 // This is here instead of runtime_x86_64.cpp because it uses SimpleRuntimeFrame
 //
 //------------------------------generate_exception_blob---------------------------
 // creates exception blob at the end
 // Using exception blob, this code is jumped from a compiled method.
 // (see emit_exception_handler in x86_64.ad file)
 //
 // Given an exception pc at a call we call into the runtime for the
 // handler in this method. This handler might merely restore state
 // (i.e. callee save registers) unwind the frame and jump to the
 // exception handler for the nmethod if there is no Java level handler
 // for the nmethod.
 //
 // This code is entered with a jmp.
 //
 // Arguments:
 //   rax: exception oop
 //   rdx: exception pc
 //
 // Results:
 //   rax: exception oop
 //   rdx: exception pc in caller or ???
 //   destination: exception handler of caller
 //
 // Note: the exception pc MUST be at a call (precise debug information)
 //       Registers rax, rdx, rcx, rsi, rdi, r8-r11 are not callee saved.
 //
 void OptoRuntime::generate_exception_blob() {
   assert(!OptoRuntime::is_callee_saved_register(RDX_num), "");
   assert(!OptoRuntime::is_callee_saved_register(RAX_num), "");
   assert(!OptoRuntime::is_callee_saved_register(RCX_num), "");
   assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
   // Allocate space for the code
   ResourceMark rm;
   // Setup code generation tools
   CodeBuffer buffer("exception_blob", 2048, 1024);
   MacroAssembler* masm = new MacroAssembler(&buffer);
   address start = __ pc();
   // Exception pc is 'return address' for stack walker
   __ push(rdx);
   __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Prolog
   // Save callee-saved registers.  See x86_64.ad.
   // rbp is an implicitly saved callee saved register (i.e., the calling
   // convention will save/restore it in the prolog/epilog). Other than that
   // there are no callee save registers now that adapter frames are gone.
   __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
   // Store exception in Thread object. We cannot pass any arguments to the
   // handle_exception call, since we do not want to make any assumption
   // about the size of the frame where the exception happened in.
   // c_rarg0 is either rdi (Linux) or rcx (Windows).
   __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()),rax);
   __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
   // This call does all the hard work.  It checks if an exception handler
   // exists in the method.
   // If so, it returns the handler address.
   // If not, it prepares for stack-unwinding, restoring the callee-save
   // registers of the frame being removed.
   //
   // address OptoRuntime::handle_exception_C(JavaThread* thread)
   // At a method handle call, the stack may not be properly aligned
   // when returning with an exception.
   address the_pc = __ pc();
   __ set_last_Java_frame(noreg, noreg, the_pc);
   __ mov(c_rarg0, r15_thread);
   __ andptr(rsp, -(StackAlignmentInBytes));    // Align stack
   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, OptoRuntime::handle_exception_C)));
   // Set an oopmap for the call site.  This oopmap will only be used if we
   // are unwinding the stack.  Hence, all locations will be dead.
   // Callee-saved registers will be the same as the frame above (i.e.,
   // handle_exception_stub), since they were restored when we got the
   // exception.
   OopMapSet* oop_maps = new OopMapSet();
   oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0));
   __ reset_last_Java_frame(false);
   // Restore callee-saved registers
   // rbp is an implicitly saved callee-saved register (i.e., the calling
   // convention will save restore it in prolog/epilog) Other than that
   // there are no callee save registers now that adapter frames are gone.
   __ movptr(rbp, Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt));
   __ addptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog
   __ pop(rdx);                  // No need for exception pc anymore
   // rax: exception handler
   // We have a handler in rax (could be deopt blob).
   __ mov(r8, rax);
   // Get the exception oop
   __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
   // Get the exception pc in case we are deoptimized
   __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
 #ifdef ASSERT
   __ movptr(Address(r15_thread, JavaThread::exception_handler_pc_offset()), (int)NULL_WORD);
   __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int)NULL_WORD);
 #endif
   // Clear the exception oop so GC no longer processes it as a root.
   __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int)NULL_WORD);
   // rax: exception oop
   // r8:  exception handler
   // rdx: exception pc
   // Jump to handler
   __ jmp(r8);
   // Make sure all code is generated
   masm->flush();
   // Set exception blob
   _exception_blob =  ExceptionBlob::create(&buffer, oop_maps, SimpleRuntimeFrame::framesize >> 1);
 }
 #endif // COMPILER2

Mercurial > jdk8-mips64-public > hotspot / annotate

src/cpu/x86/vm/sharedRuntime_x86_64.cpp@70aa912cebe5 (annotated)

src/cpu/x86/vm/sharedRuntime_x86_64.cpp