Fri, 27 Feb 2009 13:27:09 -0800
6810672: Comment typos
Summary: I have collected some typos I have found while looking at the code.
Reviewed-by: kvn, never
1 /*
2 * Copyright 1997-2008 Sun Microsystems, Inc. All Rights Reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 * have any questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_interp_masm_sparc.cpp.incl"
28 #ifndef CC_INTERP
29 #ifndef FAST_DISPATCH
30 #define FAST_DISPATCH 1
31 #endif
32 #undef FAST_DISPATCH
34 // Implementation of InterpreterMacroAssembler
36 // This file specializes the assember with interpreter-specific macros
38 const Address InterpreterMacroAssembler::l_tmp( FP, 0, (frame::interpreter_frame_l_scratch_fp_offset * wordSize ) + STACK_BIAS);
39 const Address InterpreterMacroAssembler::d_tmp( FP, 0, (frame::interpreter_frame_d_scratch_fp_offset * wordSize) + STACK_BIAS);
41 #else // CC_INTERP
42 #ifndef STATE
43 #define STATE(field_name) Lstate, in_bytes(byte_offset_of(BytecodeInterpreter, field_name))
44 #endif // STATE
46 #endif // CC_INTERP
48 void InterpreterMacroAssembler::compute_extra_locals_size_in_bytes(Register args_size, Register locals_size, Register delta) {
49 // Note: this algorithm is also used by C1's OSR entry sequence.
50 // Any changes should also be applied to CodeEmitter::emit_osr_entry().
51 assert_different_registers(args_size, locals_size);
52 // max_locals*2 for TAGS. Assumes that args_size has already been adjusted.
53 if (TaggedStackInterpreter) sll(locals_size, 1, locals_size);
54 subcc(locals_size, args_size, delta);// extra space for non-arguments locals in words
55 // Use br/mov combination because it works on both V8 and V9 and is
56 // faster.
57 Label skip_move;
58 br(Assembler::negative, true, Assembler::pt, skip_move);
59 delayed()->mov(G0, delta);
60 bind(skip_move);
61 round_to(delta, WordsPerLong); // make multiple of 2 (SP must be 2-word aligned)
62 sll(delta, LogBytesPerWord, delta); // extra space for locals in bytes
63 }
65 #ifndef CC_INTERP
67 // Dispatch code executed in the prolog of a bytecode which does not do it's
68 // own dispatch. The dispatch address is computed and placed in IdispatchAddress
69 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int bcp_incr) {
70 assert_not_delayed();
71 #ifdef FAST_DISPATCH
72 // FAST_DISPATCH and ProfileInterpreter are mutually exclusive since
73 // they both use I2.
74 assert(!ProfileInterpreter, "FAST_DISPATCH and +ProfileInterpreter are mutually exclusive");
75 ldub(Lbcp, bcp_incr, Lbyte_code); // load next bytecode
76 add(Lbyte_code, Interpreter::distance_from_dispatch_table(state), Lbyte_code);
77 // add offset to correct dispatch table
78 sll(Lbyte_code, LogBytesPerWord, Lbyte_code); // multiply by wordSize
79 ld_ptr(IdispatchTables, Lbyte_code, IdispatchAddress);// get entry addr
80 #else
81 ldub( Lbcp, bcp_incr, Lbyte_code); // load next bytecode
82 // dispatch table to use
83 Address tbl(G3_scratch, (address)Interpreter::dispatch_table(state));
85 sethi(tbl);
86 sll(Lbyte_code, LogBytesPerWord, Lbyte_code); // multiply by wordSize
87 add(tbl, tbl.base(), 0);
88 ld_ptr( G3_scratch, Lbyte_code, IdispatchAddress); // get entry addr
89 #endif
90 }
93 // Dispatch code executed in the epilog of a bytecode which does not do it's
94 // own dispatch. The dispatch address in IdispatchAddress is used for the
95 // dispatch.
96 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int bcp_incr) {
97 assert_not_delayed();
98 verify_FPU(1, state);
99 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
100 jmp( IdispatchAddress, 0 );
101 if (bcp_incr != 0) delayed()->inc(Lbcp, bcp_incr);
102 else delayed()->nop();
103 }
106 void InterpreterMacroAssembler::dispatch_next(TosState state, int bcp_incr) {
107 // %%%% consider branching to a single shared dispatch stub (for each bcp_incr)
108 assert_not_delayed();
109 ldub( Lbcp, bcp_incr, Lbyte_code); // load next bytecode
110 dispatch_Lbyte_code(state, Interpreter::dispatch_table(state), bcp_incr);
111 }
114 void InterpreterMacroAssembler::dispatch_next_noverify_oop(TosState state, int bcp_incr) {
115 // %%%% consider branching to a single shared dispatch stub (for each bcp_incr)
116 assert_not_delayed();
117 ldub( Lbcp, bcp_incr, Lbyte_code); // load next bytecode
118 dispatch_Lbyte_code(state, Interpreter::dispatch_table(state), bcp_incr, false);
119 }
122 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
123 // load current bytecode
124 assert_not_delayed();
125 ldub( Lbcp, 0, Lbyte_code); // load next bytecode
126 dispatch_base(state, table);
127 }
130 void InterpreterMacroAssembler::call_VM_leaf_base(
131 Register java_thread,
132 address entry_point,
133 int number_of_arguments
134 ) {
135 if (!java_thread->is_valid())
136 java_thread = L7_thread_cache;
137 // super call
138 MacroAssembler::call_VM_leaf_base(java_thread, entry_point, number_of_arguments);
139 }
142 void InterpreterMacroAssembler::call_VM_base(
143 Register oop_result,
144 Register java_thread,
145 Register last_java_sp,
146 address entry_point,
147 int number_of_arguments,
148 bool check_exception
149 ) {
150 if (!java_thread->is_valid())
151 java_thread = L7_thread_cache;
152 // See class ThreadInVMfromInterpreter, which assumes that the interpreter
153 // takes responsibility for setting its own thread-state on call-out.
154 // However, ThreadInVMfromInterpreter resets the state to "in_Java".
156 //save_bcp(); // save bcp
157 MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exception);
158 //restore_bcp(); // restore bcp
159 //restore_locals(); // restore locals pointer
160 }
163 void InterpreterMacroAssembler::check_and_handle_popframe(Register scratch_reg) {
164 if (JvmtiExport::can_pop_frame()) {
165 Label L;
167 // Check the "pending popframe condition" flag in the current thread
168 Address popframe_condition_addr(G2_thread, 0, in_bytes(JavaThread::popframe_condition_offset()));
169 ld(popframe_condition_addr, scratch_reg);
171 // Initiate popframe handling only if it is not already being processed. If the flag
172 // has the popframe_processing bit set, it means that this code is called *during* popframe
173 // handling - we don't want to reenter.
174 btst(JavaThread::popframe_pending_bit, scratch_reg);
175 br(zero, false, pt, L);
176 delayed()->nop();
177 btst(JavaThread::popframe_processing_bit, scratch_reg);
178 br(notZero, false, pt, L);
179 delayed()->nop();
181 // Call Interpreter::remove_activation_preserving_args_entry() to get the
182 // address of the same-named entrypoint in the generated interpreter code.
183 call_VM_leaf(noreg, CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
185 // Jump to Interpreter::_remove_activation_preserving_args_entry
186 jmpl(O0, G0, G0);
187 delayed()->nop();
188 bind(L);
189 }
190 }
193 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
194 Register thr_state = G4_scratch;
195 ld_ptr(Address(G2_thread, 0, in_bytes(JavaThread::jvmti_thread_state_offset())),
196 thr_state);
197 const Address tos_addr(thr_state, 0, in_bytes(JvmtiThreadState::earlyret_tos_offset()));
198 const Address oop_addr(thr_state, 0, in_bytes(JvmtiThreadState::earlyret_oop_offset()));
199 const Address val_addr(thr_state, 0, in_bytes(JvmtiThreadState::earlyret_value_offset()));
200 switch (state) {
201 case ltos: ld_long(val_addr, Otos_l); break;
202 case atos: ld_ptr(oop_addr, Otos_l);
203 st_ptr(G0, oop_addr); break;
204 case btos: // fall through
205 case ctos: // fall through
206 case stos: // fall through
207 case itos: ld(val_addr, Otos_l1); break;
208 case ftos: ldf(FloatRegisterImpl::S, val_addr, Ftos_f); break;
209 case dtos: ldf(FloatRegisterImpl::D, val_addr, Ftos_d); break;
210 case vtos: /* nothing to do */ break;
211 default : ShouldNotReachHere();
212 }
213 // Clean up tos value in the jvmti thread state
214 or3(G0, ilgl, G3_scratch);
215 stw(G3_scratch, tos_addr);
216 st_long(G0, val_addr);
217 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
218 }
221 void InterpreterMacroAssembler::check_and_handle_earlyret(Register scratch_reg) {
222 if (JvmtiExport::can_force_early_return()) {
223 Label L;
224 Register thr_state = G3_scratch;
225 ld_ptr(Address(G2_thread, 0, in_bytes(JavaThread::jvmti_thread_state_offset())),
226 thr_state);
227 tst(thr_state);
228 br(zero, false, pt, L); // if (thread->jvmti_thread_state() == NULL) exit;
229 delayed()->nop();
231 // Initiate earlyret handling only if it is not already being processed.
232 // If the flag has the earlyret_processing bit set, it means that this code
233 // is called *during* earlyret handling - we don't want to reenter.
234 ld(Address(thr_state, 0, in_bytes(JvmtiThreadState::earlyret_state_offset())),
235 G4_scratch);
236 cmp(G4_scratch, JvmtiThreadState::earlyret_pending);
237 br(Assembler::notEqual, false, pt, L);
238 delayed()->nop();
240 // Call Interpreter::remove_activation_early_entry() to get the address of the
241 // same-named entrypoint in the generated interpreter code
242 Address tos_addr(thr_state, 0, in_bytes(JvmtiThreadState::earlyret_tos_offset()));
243 ld(tos_addr, Otos_l1);
244 call_VM_leaf(noreg, CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), Otos_l1);
246 // Jump to Interpreter::_remove_activation_early_entry
247 jmpl(O0, G0, G0);
248 delayed()->nop();
249 bind(L);
250 }
251 }
254 void InterpreterMacroAssembler::super_call_VM_leaf(Register thread_cache, address entry_point, Register arg_1) {
255 mov(arg_1, O0);
256 MacroAssembler::call_VM_leaf_base(thread_cache, entry_point, 1);
257 }
258 #endif /* CC_INTERP */
261 #ifndef CC_INTERP
263 void InterpreterMacroAssembler::dispatch_base(TosState state, address* table) {
264 assert_not_delayed();
265 dispatch_Lbyte_code(state, table);
266 }
269 void InterpreterMacroAssembler::dispatch_normal(TosState state) {
270 dispatch_base(state, Interpreter::normal_table(state));
271 }
274 void InterpreterMacroAssembler::dispatch_only(TosState state) {
275 dispatch_base(state, Interpreter::dispatch_table(state));
276 }
279 // common code to dispatch and dispatch_only
280 // dispatch value in Lbyte_code and increment Lbcp
282 void InterpreterMacroAssembler::dispatch_Lbyte_code(TosState state, address* table, int bcp_incr, bool verify) {
283 verify_FPU(1, state);
284 // %%%%% maybe implement +VerifyActivationFrameSize here
285 //verify_thread(); //too slow; we will just verify on method entry & exit
286 if (verify) interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
287 #ifdef FAST_DISPATCH
288 if (table == Interpreter::dispatch_table(state)) {
289 // use IdispatchTables
290 add(Lbyte_code, Interpreter::distance_from_dispatch_table(state), Lbyte_code);
291 // add offset to correct dispatch table
292 sll(Lbyte_code, LogBytesPerWord, Lbyte_code); // multiply by wordSize
293 ld_ptr(IdispatchTables, Lbyte_code, G3_scratch); // get entry addr
294 } else {
295 #endif
296 // dispatch table to use
297 Address tbl(G3_scratch, (address)table);
299 sll(Lbyte_code, LogBytesPerWord, Lbyte_code); // multiply by wordSize
300 load_address(tbl); // compute addr of table
301 ld_ptr(G3_scratch, Lbyte_code, G3_scratch); // get entry addr
302 #ifdef FAST_DISPATCH
303 }
304 #endif
305 jmp( G3_scratch, 0 );
306 if (bcp_incr != 0) delayed()->inc(Lbcp, bcp_incr);
307 else delayed()->nop();
308 }
311 // Helpers for expression stack
313 // Longs and doubles are Category 2 computational types in the
314 // JVM specification (section 3.11.1) and take 2 expression stack or
315 // local slots.
316 // Aligning them on 32 bit with tagged stacks is hard because the code generated
317 // for the dup* bytecodes depends on what types are already on the stack.
318 // If the types are split into the two stack/local slots, that is much easier
319 // (and we can use 0 for non-reference tags).
321 // Known good alignment in _LP64 but unknown otherwise
322 void InterpreterMacroAssembler::load_unaligned_double(Register r1, int offset, FloatRegister d) {
323 assert_not_delayed();
325 #ifdef _LP64
326 ldf(FloatRegisterImpl::D, r1, offset, d);
327 #else
328 ldf(FloatRegisterImpl::S, r1, offset, d);
329 ldf(FloatRegisterImpl::S, r1, offset + Interpreter::stackElementSize(), d->successor());
330 #endif
331 }
333 // Known good alignment in _LP64 but unknown otherwise
334 void InterpreterMacroAssembler::store_unaligned_double(FloatRegister d, Register r1, int offset) {
335 assert_not_delayed();
337 #ifdef _LP64
338 stf(FloatRegisterImpl::D, d, r1, offset);
339 // store something more useful here
340 debug_only(stx(G0, r1, offset+Interpreter::stackElementSize());)
341 #else
342 stf(FloatRegisterImpl::S, d, r1, offset);
343 stf(FloatRegisterImpl::S, d->successor(), r1, offset + Interpreter::stackElementSize());
344 #endif
345 }
348 // Known good alignment in _LP64 but unknown otherwise
349 void InterpreterMacroAssembler::load_unaligned_long(Register r1, int offset, Register rd) {
350 assert_not_delayed();
351 #ifdef _LP64
352 ldx(r1, offset, rd);
353 #else
354 ld(r1, offset, rd);
355 ld(r1, offset + Interpreter::stackElementSize(), rd->successor());
356 #endif
357 }
359 // Known good alignment in _LP64 but unknown otherwise
360 void InterpreterMacroAssembler::store_unaligned_long(Register l, Register r1, int offset) {
361 assert_not_delayed();
363 #ifdef _LP64
364 stx(l, r1, offset);
365 // store something more useful here
366 debug_only(stx(G0, r1, offset+Interpreter::stackElementSize());)
367 #else
368 st(l, r1, offset);
369 st(l->successor(), r1, offset + Interpreter::stackElementSize());
370 #endif
371 }
373 #ifdef ASSERT
374 void InterpreterMacroAssembler::verify_stack_tag(frame::Tag t,
375 Register r,
376 Register scratch) {
377 if (TaggedStackInterpreter) {
378 Label ok, long_ok;
379 ld_ptr(Lesp, Interpreter::expr_tag_offset_in_bytes(0), r);
380 if (t == frame::TagCategory2) {
381 cmp(r, G0);
382 brx(Assembler::equal, false, Assembler::pt, long_ok);
383 delayed()->ld_ptr(Lesp, Interpreter::expr_tag_offset_in_bytes(1), r);
384 stop("stack long/double tag value bad");
385 bind(long_ok);
386 cmp(r, G0);
387 } else if (t == frame::TagValue) {
388 cmp(r, G0);
389 } else {
390 assert_different_registers(r, scratch);
391 mov(t, scratch);
392 cmp(r, scratch);
393 }
394 brx(Assembler::equal, false, Assembler::pt, ok);
395 delayed()->nop();
396 // Also compare if the stack value is zero, then the tag might
397 // not have been set coming from deopt.
398 ld_ptr(Lesp, Interpreter::expr_offset_in_bytes(0), r);
399 cmp(r, G0);
400 brx(Assembler::equal, false, Assembler::pt, ok);
401 delayed()->nop();
402 stop("Stack tag value is bad");
403 bind(ok);
404 }
405 }
406 #endif // ASSERT
408 void InterpreterMacroAssembler::pop_i(Register r) {
409 assert_not_delayed();
410 // Uses destination register r for scratch
411 debug_only(verify_stack_tag(frame::TagValue, r));
412 ld(Lesp, Interpreter::expr_offset_in_bytes(0), r);
413 inc(Lesp, Interpreter::stackElementSize());
414 debug_only(verify_esp(Lesp));
415 }
417 void InterpreterMacroAssembler::pop_ptr(Register r, Register scratch) {
418 assert_not_delayed();
419 // Uses destination register r for scratch
420 debug_only(verify_stack_tag(frame::TagReference, r, scratch));
421 ld_ptr(Lesp, Interpreter::expr_offset_in_bytes(0), r);
422 inc(Lesp, Interpreter::stackElementSize());
423 debug_only(verify_esp(Lesp));
424 }
426 void InterpreterMacroAssembler::pop_l(Register r) {
427 assert_not_delayed();
428 // Uses destination register r for scratch
429 debug_only(verify_stack_tag(frame::TagCategory2, r));
430 load_unaligned_long(Lesp, Interpreter::expr_offset_in_bytes(0), r);
431 inc(Lesp, 2*Interpreter::stackElementSize());
432 debug_only(verify_esp(Lesp));
433 }
436 void InterpreterMacroAssembler::pop_f(FloatRegister f, Register scratch) {
437 assert_not_delayed();
438 debug_only(verify_stack_tag(frame::TagValue, scratch));
439 ldf(FloatRegisterImpl::S, Lesp, Interpreter::expr_offset_in_bytes(0), f);
440 inc(Lesp, Interpreter::stackElementSize());
441 debug_only(verify_esp(Lesp));
442 }
445 void InterpreterMacroAssembler::pop_d(FloatRegister f, Register scratch) {
446 assert_not_delayed();
447 debug_only(verify_stack_tag(frame::TagCategory2, scratch));
448 load_unaligned_double(Lesp, Interpreter::expr_offset_in_bytes(0), f);
449 inc(Lesp, 2*Interpreter::stackElementSize());
450 debug_only(verify_esp(Lesp));
451 }
454 // (Note use register first, then decrement so dec can be done during store stall)
455 void InterpreterMacroAssembler::tag_stack(Register r) {
456 if (TaggedStackInterpreter) {
457 st_ptr(r, Lesp, Interpreter::tag_offset_in_bytes());
458 }
459 }
461 void InterpreterMacroAssembler::tag_stack(frame::Tag t, Register r) {
462 if (TaggedStackInterpreter) {
463 assert (frame::TagValue == 0, "TagValue must be zero");
464 if (t == frame::TagValue) {
465 st_ptr(G0, Lesp, Interpreter::tag_offset_in_bytes());
466 } else if (t == frame::TagCategory2) {
467 st_ptr(G0, Lesp, Interpreter::tag_offset_in_bytes());
468 // Tag next slot down too
469 st_ptr(G0, Lesp, -Interpreter::stackElementSize() + Interpreter::tag_offset_in_bytes());
470 } else {
471 assert_different_registers(r, O3);
472 mov(t, O3);
473 st_ptr(O3, Lesp, Interpreter::tag_offset_in_bytes());
474 }
475 }
476 }
478 void InterpreterMacroAssembler::push_i(Register r) {
479 assert_not_delayed();
480 debug_only(verify_esp(Lesp));
481 tag_stack(frame::TagValue, r);
482 st( r, Lesp, Interpreter::value_offset_in_bytes());
483 dec( Lesp, Interpreter::stackElementSize());
484 }
486 void InterpreterMacroAssembler::push_ptr(Register r) {
487 assert_not_delayed();
488 tag_stack(frame::TagReference, r);
489 st_ptr( r, Lesp, Interpreter::value_offset_in_bytes());
490 dec( Lesp, Interpreter::stackElementSize());
491 }
493 void InterpreterMacroAssembler::push_ptr(Register r, Register tag) {
494 assert_not_delayed();
495 tag_stack(tag);
496 st_ptr(r, Lesp, Interpreter::value_offset_in_bytes());
497 dec( Lesp, Interpreter::stackElementSize());
498 }
500 // remember: our convention for longs in SPARC is:
501 // O0 (Otos_l1) has high-order part in first word,
502 // O1 (Otos_l2) has low-order part in second word
504 void InterpreterMacroAssembler::push_l(Register r) {
505 assert_not_delayed();
506 debug_only(verify_esp(Lesp));
507 tag_stack(frame::TagCategory2, r);
508 // Longs are in stored in memory-correct order, even if unaligned.
509 // and may be separated by stack tags.
510 int offset = -Interpreter::stackElementSize() + Interpreter::value_offset_in_bytes();
511 store_unaligned_long(r, Lesp, offset);
512 dec(Lesp, 2 * Interpreter::stackElementSize());
513 }
516 void InterpreterMacroAssembler::push_f(FloatRegister f) {
517 assert_not_delayed();
518 debug_only(verify_esp(Lesp));
519 tag_stack(frame::TagValue, Otos_i);
520 stf(FloatRegisterImpl::S, f, Lesp, Interpreter::value_offset_in_bytes());
521 dec(Lesp, Interpreter::stackElementSize());
522 }
525 void InterpreterMacroAssembler::push_d(FloatRegister d) {
526 assert_not_delayed();
527 debug_only(verify_esp(Lesp));
528 tag_stack(frame::TagCategory2, Otos_i);
529 // Longs are in stored in memory-correct order, even if unaligned.
530 // and may be separated by stack tags.
531 int offset = -Interpreter::stackElementSize() + Interpreter::value_offset_in_bytes();
532 store_unaligned_double(d, Lesp, offset);
533 dec(Lesp, 2 * Interpreter::stackElementSize());
534 }
537 void InterpreterMacroAssembler::push(TosState state) {
538 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
539 switch (state) {
540 case atos: push_ptr(); break;
541 case btos: push_i(); break;
542 case ctos:
543 case stos: push_i(); break;
544 case itos: push_i(); break;
545 case ltos: push_l(); break;
546 case ftos: push_f(); break;
547 case dtos: push_d(); break;
548 case vtos: /* nothing to do */ break;
549 default : ShouldNotReachHere();
550 }
551 }
554 void InterpreterMacroAssembler::pop(TosState state) {
555 switch (state) {
556 case atos: pop_ptr(); break;
557 case btos: pop_i(); break;
558 case ctos:
559 case stos: pop_i(); break;
560 case itos: pop_i(); break;
561 case ltos: pop_l(); break;
562 case ftos: pop_f(); break;
563 case dtos: pop_d(); break;
564 case vtos: /* nothing to do */ break;
565 default : ShouldNotReachHere();
566 }
567 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
568 }
571 // Tagged stack helpers for swap and dup
572 void InterpreterMacroAssembler::load_ptr_and_tag(int n, Register val,
573 Register tag) {
574 ld_ptr(Lesp, Interpreter::expr_offset_in_bytes(n), val);
575 if (TaggedStackInterpreter) {
576 ld_ptr(Lesp, Interpreter::expr_tag_offset_in_bytes(n), tag);
577 }
578 }
579 void InterpreterMacroAssembler::store_ptr_and_tag(int n, Register val,
580 Register tag) {
581 st_ptr(val, Lesp, Interpreter::expr_offset_in_bytes(n));
582 if (TaggedStackInterpreter) {
583 st_ptr(tag, Lesp, Interpreter::expr_tag_offset_in_bytes(n));
584 }
585 }
588 void InterpreterMacroAssembler::load_receiver(Register param_count,
589 Register recv) {
591 sll(param_count, Interpreter::logStackElementSize(), param_count);
592 if (TaggedStackInterpreter) {
593 add(param_count, Interpreter::value_offset_in_bytes(), param_count); // get obj address
594 }
595 ld_ptr(Lesp, param_count, recv); // gets receiver Oop
596 }
598 void InterpreterMacroAssembler::empty_expression_stack() {
599 // Reset Lesp.
600 sub( Lmonitors, wordSize, Lesp );
602 // Reset SP by subtracting more space from Lesp.
603 Label done;
605 const Address max_stack (Lmethod, 0, in_bytes(methodOopDesc::max_stack_offset()));
606 const Address access_flags(Lmethod, 0, in_bytes(methodOopDesc::access_flags_offset()));
608 verify_oop(Lmethod);
611 assert( G4_scratch != Gframe_size,
612 "Only you can prevent register aliasing!");
614 // A native does not need to do this, since its callee does not change SP.
615 ld(access_flags, Gframe_size);
616 btst(JVM_ACC_NATIVE, Gframe_size);
617 br(Assembler::notZero, false, Assembler::pt, done);
618 delayed()->nop();
620 //
621 // Compute max expression stack+register save area
622 //
623 lduh( max_stack, Gframe_size );
624 if (TaggedStackInterpreter) sll ( Gframe_size, 1, Gframe_size); // max_stack * 2 for TAGS
625 add( Gframe_size, frame::memory_parameter_word_sp_offset, Gframe_size );
627 //
628 // now set up a stack frame with the size computed above
629 //
630 //round_to( Gframe_size, WordsPerLong ); // -- moved down to the "and" below
631 sll( Gframe_size, LogBytesPerWord, Gframe_size );
632 sub( Lesp, Gframe_size, Gframe_size );
633 and3( Gframe_size, -(2 * wordSize), Gframe_size ); // align SP (downwards) to an 8/16-byte boundary
634 debug_only(verify_sp(Gframe_size, G4_scratch));
635 #ifdef _LP64
636 sub(Gframe_size, STACK_BIAS, Gframe_size );
637 #endif
638 mov(Gframe_size, SP);
640 bind(done);
641 }
644 #ifdef ASSERT
645 void InterpreterMacroAssembler::verify_sp(Register Rsp, Register Rtemp) {
646 Label Bad, OK;
648 // Saved SP must be aligned.
649 #ifdef _LP64
650 btst(2*BytesPerWord-1, Rsp);
651 #else
652 btst(LongAlignmentMask, Rsp);
653 #endif
654 br(Assembler::notZero, false, Assembler::pn, Bad);
655 delayed()->nop();
657 // Saved SP, plus register window size, must not be above FP.
658 add(Rsp, frame::register_save_words * wordSize, Rtemp);
659 #ifdef _LP64
660 sub(Rtemp, STACK_BIAS, Rtemp); // Bias Rtemp before cmp to FP
661 #endif
662 cmp(Rtemp, FP);
663 brx(Assembler::greaterUnsigned, false, Assembler::pn, Bad);
664 delayed()->nop();
666 // Saved SP must not be ridiculously below current SP.
667 size_t maxstack = MAX2(JavaThread::stack_size_at_create(), (size_t) 4*K*K);
668 set(maxstack, Rtemp);
669 sub(SP, Rtemp, Rtemp);
670 #ifdef _LP64
671 add(Rtemp, STACK_BIAS, Rtemp); // Unbias Rtemp before cmp to Rsp
672 #endif
673 cmp(Rsp, Rtemp);
674 brx(Assembler::lessUnsigned, false, Assembler::pn, Bad);
675 delayed()->nop();
677 br(Assembler::always, false, Assembler::pn, OK);
678 delayed()->nop();
680 bind(Bad);
681 stop("on return to interpreted call, restored SP is corrupted");
683 bind(OK);
684 }
687 void InterpreterMacroAssembler::verify_esp(Register Resp) {
688 // about to read or write Resp[0]
689 // make sure it is not in the monitors or the register save area
690 Label OK1, OK2;
692 cmp(Resp, Lmonitors);
693 brx(Assembler::lessUnsigned, true, Assembler::pt, OK1);
694 delayed()->sub(Resp, frame::memory_parameter_word_sp_offset * wordSize, Resp);
695 stop("too many pops: Lesp points into monitor area");
696 bind(OK1);
697 #ifdef _LP64
698 sub(Resp, STACK_BIAS, Resp);
699 #endif
700 cmp(Resp, SP);
701 brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, OK2);
702 delayed()->add(Resp, STACK_BIAS + frame::memory_parameter_word_sp_offset * wordSize, Resp);
703 stop("too many pushes: Lesp points into register window");
704 bind(OK2);
705 }
706 #endif // ASSERT
708 // Load compiled (i2c) or interpreter entry when calling from interpreted and
709 // do the call. Centralized so that all interpreter calls will do the same actions.
710 // If jvmti single stepping is on for a thread we must not call compiled code.
711 void InterpreterMacroAssembler::call_from_interpreter(Register target, Register scratch, Register Rret) {
713 // Assume we want to go compiled if available
715 ld_ptr(G5_method, in_bytes(methodOopDesc::from_interpreted_offset()), target);
717 if (JvmtiExport::can_post_interpreter_events()) {
718 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
719 // compiled code in threads for which the event is enabled. Check here for
720 // interp_only_mode if these events CAN be enabled.
721 verify_thread();
722 Label skip_compiled_code;
724 const Address interp_only (G2_thread, 0, in_bytes(JavaThread::interp_only_mode_offset()));
726 ld(interp_only, scratch);
727 tst(scratch);
728 br(Assembler::notZero, true, Assembler::pn, skip_compiled_code);
729 delayed()->ld_ptr(G5_method, in_bytes(methodOopDesc::interpreter_entry_offset()), target);
730 bind(skip_compiled_code);
731 }
733 // the i2c_adapters need methodOop in G5_method (right? %%%)
734 // do the call
735 #ifdef ASSERT
736 {
737 Label ok;
738 br_notnull(target, false, Assembler::pt, ok);
739 delayed()->nop();
740 stop("null entry point");
741 bind(ok);
742 }
743 #endif // ASSERT
745 // Adjust Rret first so Llast_SP can be same as Rret
746 add(Rret, -frame::pc_return_offset, O7);
747 add(Lesp, BytesPerWord, Gargs); // setup parameter pointer
748 // Record SP so we can remove any stack space allocated by adapter transition
749 jmp(target, 0);
750 delayed()->mov(SP, Llast_SP);
751 }
753 void InterpreterMacroAssembler::if_cmp(Condition cc, bool ptr_compare) {
754 assert_not_delayed();
756 Label not_taken;
757 if (ptr_compare) brx(cc, false, Assembler::pn, not_taken);
758 else br (cc, false, Assembler::pn, not_taken);
759 delayed()->nop();
761 TemplateTable::branch(false,false);
763 bind(not_taken);
765 profile_not_taken_branch(G3_scratch);
766 }
769 void InterpreterMacroAssembler::get_2_byte_integer_at_bcp(
770 int bcp_offset,
771 Register Rtmp,
772 Register Rdst,
773 signedOrNot is_signed,
774 setCCOrNot should_set_CC ) {
775 assert(Rtmp != Rdst, "need separate temp register");
776 assert_not_delayed();
777 switch (is_signed) {
778 default: ShouldNotReachHere();
780 case Signed: ldsb( Lbcp, bcp_offset, Rdst ); break; // high byte
781 case Unsigned: ldub( Lbcp, bcp_offset, Rdst ); break; // high byte
782 }
783 ldub( Lbcp, bcp_offset + 1, Rtmp ); // low byte
784 sll( Rdst, BitsPerByte, Rdst);
785 switch (should_set_CC ) {
786 default: ShouldNotReachHere();
788 case set_CC: orcc( Rdst, Rtmp, Rdst ); break;
789 case dont_set_CC: or3( Rdst, Rtmp, Rdst ); break;
790 }
791 }
794 void InterpreterMacroAssembler::get_4_byte_integer_at_bcp(
795 int bcp_offset,
796 Register Rtmp,
797 Register Rdst,
798 setCCOrNot should_set_CC ) {
799 assert(Rtmp != Rdst, "need separate temp register");
800 assert_not_delayed();
801 add( Lbcp, bcp_offset, Rtmp);
802 andcc( Rtmp, 3, G0);
803 Label aligned;
804 switch (should_set_CC ) {
805 default: ShouldNotReachHere();
807 case set_CC: break;
808 case dont_set_CC: break;
809 }
811 br(Assembler::zero, true, Assembler::pn, aligned);
812 #ifdef _LP64
813 delayed()->ldsw(Rtmp, 0, Rdst);
814 #else
815 delayed()->ld(Rtmp, 0, Rdst);
816 #endif
818 ldub(Lbcp, bcp_offset + 3, Rdst);
819 ldub(Lbcp, bcp_offset + 2, Rtmp); sll(Rtmp, 8, Rtmp); or3(Rtmp, Rdst, Rdst);
820 ldub(Lbcp, bcp_offset + 1, Rtmp); sll(Rtmp, 16, Rtmp); or3(Rtmp, Rdst, Rdst);
821 #ifdef _LP64
822 ldsb(Lbcp, bcp_offset + 0, Rtmp); sll(Rtmp, 24, Rtmp);
823 #else
824 // Unsigned load is faster than signed on some implementations
825 ldub(Lbcp, bcp_offset + 0, Rtmp); sll(Rtmp, 24, Rtmp);
826 #endif
827 or3(Rtmp, Rdst, Rdst );
829 bind(aligned);
830 if (should_set_CC == set_CC) tst(Rdst);
831 }
834 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register tmp, int bcp_offset) {
835 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
836 assert_different_registers(cache, tmp);
837 assert_not_delayed();
838 get_2_byte_integer_at_bcp(bcp_offset, cache, tmp, Unsigned);
839 // convert from field index to ConstantPoolCacheEntry index
840 // and from word index to byte offset
841 sll(tmp, exact_log2(in_words(ConstantPoolCacheEntry::size()) * BytesPerWord), tmp);
842 add(LcpoolCache, tmp, cache);
843 }
846 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp, int bcp_offset) {
847 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
848 assert_different_registers(cache, tmp);
849 assert_not_delayed();
850 get_2_byte_integer_at_bcp(bcp_offset, cache, tmp, Unsigned);
851 // convert from field index to ConstantPoolCacheEntry index
852 // and from word index to byte offset
853 sll(tmp, exact_log2(in_words(ConstantPoolCacheEntry::size()) * BytesPerWord), tmp);
854 // skip past the header
855 add(tmp, in_bytes(constantPoolCacheOopDesc::base_offset()), tmp);
856 // construct pointer to cache entry
857 add(LcpoolCache, tmp, cache);
858 }
861 // Generate a subtype check: branch to ok_is_subtype if sub_klass is
862 // a subtype of super_klass. Blows registers Rsuper_klass, Rsub_klass, tmp1, tmp2.
863 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
864 Register Rsuper_klass,
865 Register Rtmp1,
866 Register Rtmp2,
867 Register Rtmp3,
868 Label &ok_is_subtype ) {
869 Label not_subtype, loop;
871 // Profile the not-null value's klass.
872 profile_typecheck(Rsub_klass, Rtmp1);
874 // Load the super-klass's check offset into Rtmp1
875 ld( Rsuper_klass, sizeof(oopDesc) + Klass::super_check_offset_offset_in_bytes(), Rtmp1 );
876 // Load from the sub-klass's super-class display list, or a 1-word cache of
877 // the secondary superclass list, or a failing value with a sentinel offset
878 // if the super-klass is an interface or exceptionally deep in the Java
879 // hierarchy and we have to scan the secondary superclass list the hard way.
880 ld_ptr( Rsub_klass, Rtmp1, Rtmp2 );
881 // See if we get an immediate positive hit
882 cmp( Rtmp2, Rsuper_klass );
883 brx( Assembler::equal, false, Assembler::pt, ok_is_subtype );
884 // In the delay slot, check for immediate negative hit
885 delayed()->cmp( Rtmp1, sizeof(oopDesc) + Klass::secondary_super_cache_offset_in_bytes() );
886 br( Assembler::notEqual, false, Assembler::pt, not_subtype );
887 // In the delay slot, check for self
888 delayed()->cmp( Rsub_klass, Rsuper_klass );
889 brx( Assembler::equal, false, Assembler::pt, ok_is_subtype );
891 // Now do a linear scan of the secondary super-klass chain.
892 delayed()->ld_ptr( Rsub_klass, sizeof(oopDesc) + Klass::secondary_supers_offset_in_bytes(), Rtmp2 );
894 // compress superclass
895 if (UseCompressedOops) encode_heap_oop(Rsuper_klass);
897 // Rtmp2 holds the objArrayOop of secondary supers.
898 ld( Rtmp2, arrayOopDesc::length_offset_in_bytes(), Rtmp1 );// Load the array length
899 // Check for empty secondary super list
900 tst(Rtmp1);
902 // Top of search loop
903 bind( loop );
904 br( Assembler::equal, false, Assembler::pn, not_subtype );
905 delayed()->nop();
907 // load next super to check
908 if (UseCompressedOops) {
909 lduw( Rtmp2, arrayOopDesc::base_offset_in_bytes(T_OBJECT), Rtmp3);
910 // Bump array pointer forward one oop
911 add( Rtmp2, 4, Rtmp2 );
912 } else {
913 ld_ptr( Rtmp2, arrayOopDesc::base_offset_in_bytes(T_OBJECT), Rtmp3);
914 // Bump array pointer forward one oop
915 add( Rtmp2, wordSize, Rtmp2);
916 }
917 // Look for Rsuper_klass on Rsub_klass's secondary super-class-overflow list
918 cmp( Rtmp3, Rsuper_klass );
919 // A miss means we are NOT a subtype and need to keep looping
920 brx( Assembler::notEqual, false, Assembler::pt, loop );
921 delayed()->deccc( Rtmp1 ); // dec trip counter in delay slot
922 // Falling out the bottom means we found a hit; we ARE a subtype
923 if (UseCompressedOops) decode_heap_oop(Rsuper_klass);
924 br( Assembler::always, false, Assembler::pt, ok_is_subtype );
925 // Update the cache
926 delayed()->st_ptr( Rsuper_klass, Rsub_klass,
927 sizeof(oopDesc) + Klass::secondary_super_cache_offset_in_bytes() );
929 bind(not_subtype);
930 profile_typecheck_failed(Rtmp1);
931 }
933 // Separate these two to allow for delay slot in middle
934 // These are used to do a test and full jump to exception-throwing code.
936 // %%%%% Could possibly reoptimize this by testing to see if could use
937 // a single conditional branch (i.e. if span is small enough.
938 // If you go that route, than get rid of the split and give up
939 // on the delay-slot hack.
941 void InterpreterMacroAssembler::throw_if_not_1_icc( Condition ok_condition,
942 Label& ok ) {
943 assert_not_delayed();
944 br(ok_condition, true, pt, ok);
945 // DELAY SLOT
946 }
948 void InterpreterMacroAssembler::throw_if_not_1_xcc( Condition ok_condition,
949 Label& ok ) {
950 assert_not_delayed();
951 bp( ok_condition, true, Assembler::xcc, pt, ok);
952 // DELAY SLOT
953 }
955 void InterpreterMacroAssembler::throw_if_not_1_x( Condition ok_condition,
956 Label& ok ) {
957 assert_not_delayed();
958 brx(ok_condition, true, pt, ok);
959 // DELAY SLOT
960 }
962 void InterpreterMacroAssembler::throw_if_not_2( address throw_entry_point,
963 Register Rscratch,
964 Label& ok ) {
965 assert(throw_entry_point != NULL, "entry point must be generated by now");
966 Address dest(Rscratch, throw_entry_point);
967 jump_to(dest);
968 delayed()->nop();
969 bind(ok);
970 }
973 // And if you cannot use the delay slot, here is a shorthand:
975 void InterpreterMacroAssembler::throw_if_not_icc( Condition ok_condition,
976 address throw_entry_point,
977 Register Rscratch ) {
978 Label ok;
979 if (ok_condition != never) {
980 throw_if_not_1_icc( ok_condition, ok);
981 delayed()->nop();
982 }
983 throw_if_not_2( throw_entry_point, Rscratch, ok);
984 }
985 void InterpreterMacroAssembler::throw_if_not_xcc( Condition ok_condition,
986 address throw_entry_point,
987 Register Rscratch ) {
988 Label ok;
989 if (ok_condition != never) {
990 throw_if_not_1_xcc( ok_condition, ok);
991 delayed()->nop();
992 }
993 throw_if_not_2( throw_entry_point, Rscratch, ok);
994 }
995 void InterpreterMacroAssembler::throw_if_not_x( Condition ok_condition,
996 address throw_entry_point,
997 Register Rscratch ) {
998 Label ok;
999 if (ok_condition != never) {
1000 throw_if_not_1_x( ok_condition, ok);
1001 delayed()->nop();
1002 }
1003 throw_if_not_2( throw_entry_point, Rscratch, ok);
1004 }
1006 // Check that index is in range for array, then shift index by index_shift, and put arrayOop + shifted_index into res
1007 // Note: res is still shy of address by array offset into object.
1009 void InterpreterMacroAssembler::index_check_without_pop(Register array, Register index, int index_shift, Register tmp, Register res) {
1010 assert_not_delayed();
1012 verify_oop(array);
1013 #ifdef _LP64
1014 // sign extend since tos (index) can be a 32bit value
1015 sra(index, G0, index);
1016 #endif // _LP64
1018 // check array
1019 Label ptr_ok;
1020 tst(array);
1021 throw_if_not_1_x( notZero, ptr_ok );
1022 delayed()->ld( array, arrayOopDesc::length_offset_in_bytes(), tmp ); // check index
1023 throw_if_not_2( Interpreter::_throw_NullPointerException_entry, G3_scratch, ptr_ok);
1025 Label index_ok;
1026 cmp(index, tmp);
1027 throw_if_not_1_icc( lessUnsigned, index_ok );
1028 if (index_shift > 0) delayed()->sll(index, index_shift, index);
1029 else delayed()->add(array, index, res); // addr - const offset in index
1030 // convention: move aberrant index into G3_scratch for exception message
1031 mov(index, G3_scratch);
1032 throw_if_not_2( Interpreter::_throw_ArrayIndexOutOfBoundsException_entry, G4_scratch, index_ok);
1034 // add offset if didn't do it in delay slot
1035 if (index_shift > 0) add(array, index, res); // addr - const offset in index
1036 }
1039 void InterpreterMacroAssembler::index_check(Register array, Register index, int index_shift, Register tmp, Register res) {
1040 assert_not_delayed();
1042 // pop array
1043 pop_ptr(array);
1045 // check array
1046 index_check_without_pop(array, index, index_shift, tmp, res);
1047 }
1050 void InterpreterMacroAssembler::get_constant_pool(Register Rdst) {
1051 ld_ptr(Lmethod, in_bytes(methodOopDesc::constants_offset()), Rdst);
1052 }
1055 void InterpreterMacroAssembler::get_constant_pool_cache(Register Rdst) {
1056 get_constant_pool(Rdst);
1057 ld_ptr(Rdst, constantPoolOopDesc::cache_offset_in_bytes(), Rdst);
1058 }
1061 void InterpreterMacroAssembler::get_cpool_and_tags(Register Rcpool, Register Rtags) {
1062 get_constant_pool(Rcpool);
1063 ld_ptr(Rcpool, constantPoolOopDesc::tags_offset_in_bytes(), Rtags);
1064 }
1067 // unlock if synchronized method
1068 //
1069 // Unlock the receiver if this is a synchronized method.
1070 // Unlock any Java monitors from syncronized blocks.
1071 //
1072 // If there are locked Java monitors
1073 // If throw_monitor_exception
1074 // throws IllegalMonitorStateException
1075 // Else if install_monitor_exception
1076 // installs IllegalMonitorStateException
1077 // Else
1078 // no error processing
1079 void InterpreterMacroAssembler::unlock_if_synchronized_method(TosState state,
1080 bool throw_monitor_exception,
1081 bool install_monitor_exception) {
1082 Label unlocked, unlock, no_unlock;
1084 // get the value of _do_not_unlock_if_synchronized into G1_scratch
1085 const Address do_not_unlock_if_synchronized(G2_thread, 0,
1086 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1087 ldbool(do_not_unlock_if_synchronized, G1_scratch);
1088 stbool(G0, do_not_unlock_if_synchronized); // reset the flag
1090 // check if synchronized method
1091 const Address access_flags(Lmethod, 0, in_bytes(methodOopDesc::access_flags_offset()));
1092 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
1093 push(state); // save tos
1094 ld(access_flags, G3_scratch);
1095 btst(JVM_ACC_SYNCHRONIZED, G3_scratch);
1096 br( zero, false, pt, unlocked);
1097 delayed()->nop();
1099 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
1100 // is set.
1101 tstbool(G1_scratch);
1102 br(Assembler::notZero, false, pn, no_unlock);
1103 delayed()->nop();
1105 // BasicObjectLock will be first in list, since this is a synchronized method. However, need
1106 // to check that the object has not been unlocked by an explicit monitorexit bytecode.
1108 //Intel: if (throw_monitor_exception) ... else ...
1109 // Entry already unlocked, need to throw exception
1110 //...
1112 // pass top-most monitor elem
1113 add( top_most_monitor(), O1 );
1115 ld_ptr(O1, BasicObjectLock::obj_offset_in_bytes(), G3_scratch);
1116 br_notnull(G3_scratch, false, pt, unlock);
1117 delayed()->nop();
1119 if (throw_monitor_exception) {
1120 // Entry already unlocked need to throw an exception
1121 MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
1122 should_not_reach_here();
1123 } else {
1124 // Monitor already unlocked during a stack unroll.
1125 // If requested, install an illegal_monitor_state_exception.
1126 // Continue with stack unrolling.
1127 if (install_monitor_exception) {
1128 MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
1129 }
1130 ba(false, unlocked);
1131 delayed()->nop();
1132 }
1134 bind(unlock);
1136 unlock_object(O1);
1138 bind(unlocked);
1140 // I0, I1: Might contain return value
1142 // Check that all monitors are unlocked
1143 { Label loop, exception, entry, restart;
1145 Register Rmptr = O0;
1146 Register Rtemp = O1;
1147 Register Rlimit = Lmonitors;
1148 const jint delta = frame::interpreter_frame_monitor_size() * wordSize;
1149 assert( (delta & LongAlignmentMask) == 0,
1150 "sizeof BasicObjectLock must be even number of doublewords");
1152 #ifdef ASSERT
1153 add(top_most_monitor(), Rmptr, delta);
1154 { Label L;
1155 // ensure that Rmptr starts out above (or at) Rlimit
1156 cmp(Rmptr, Rlimit);
1157 brx(Assembler::greaterEqualUnsigned, false, pn, L);
1158 delayed()->nop();
1159 stop("monitor stack has negative size");
1160 bind(L);
1161 }
1162 #endif
1163 bind(restart);
1164 ba(false, entry);
1165 delayed()->
1166 add(top_most_monitor(), Rmptr, delta); // points to current entry, starting with bottom-most entry
1168 // Entry is still locked, need to throw exception
1169 bind(exception);
1170 if (throw_monitor_exception) {
1171 MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
1172 should_not_reach_here();
1173 } else {
1174 // Stack unrolling. Unlock object and if requested, install illegal_monitor_exception.
1175 // Unlock does not block, so don't have to worry about the frame
1176 unlock_object(Rmptr);
1177 if (install_monitor_exception) {
1178 MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
1179 }
1180 ba(false, restart);
1181 delayed()->nop();
1182 }
1184 bind(loop);
1185 cmp(Rtemp, G0); // check if current entry is used
1186 brx(Assembler::notEqual, false, pn, exception);
1187 delayed()->
1188 dec(Rmptr, delta); // otherwise advance to next entry
1189 #ifdef ASSERT
1190 { Label L;
1191 // ensure that Rmptr has not somehow stepped below Rlimit
1192 cmp(Rmptr, Rlimit);
1193 brx(Assembler::greaterEqualUnsigned, false, pn, L);
1194 delayed()->nop();
1195 stop("ran off the end of the monitor stack");
1196 bind(L);
1197 }
1198 #endif
1199 bind(entry);
1200 cmp(Rmptr, Rlimit); // check if bottom reached
1201 brx(Assembler::notEqual, true, pn, loop); // if not at bottom then check this entry
1202 delayed()->
1203 ld_ptr(Rmptr, BasicObjectLock::obj_offset_in_bytes() - delta, Rtemp);
1204 }
1206 bind(no_unlock);
1207 pop(state);
1208 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
1209 }
1212 // remove activation
1213 //
1214 // Unlock the receiver if this is a synchronized method.
1215 // Unlock any Java monitors from syncronized blocks.
1216 // Remove the activation from the stack.
1217 //
1218 // If there are locked Java monitors
1219 // If throw_monitor_exception
1220 // throws IllegalMonitorStateException
1221 // Else if install_monitor_exception
1222 // installs IllegalMonitorStateException
1223 // Else
1224 // no error processing
1225 void InterpreterMacroAssembler::remove_activation(TosState state,
1226 bool throw_monitor_exception,
1227 bool install_monitor_exception) {
1229 unlock_if_synchronized_method(state, throw_monitor_exception, install_monitor_exception);
1231 // save result (push state before jvmti call and pop it afterwards) and notify jvmti
1232 notify_method_exit(false, state, NotifyJVMTI);
1234 interp_verify_oop(Otos_i, state, __FILE__, __LINE__);
1235 verify_oop(Lmethod);
1236 verify_thread();
1238 // return tos
1239 assert(Otos_l1 == Otos_i, "adjust code below");
1240 switch (state) {
1241 #ifdef _LP64
1242 case ltos: mov(Otos_l, Otos_l->after_save()); break; // O0 -> I0
1243 #else
1244 case ltos: mov(Otos_l2, Otos_l2->after_save()); // fall through // O1 -> I1
1245 #endif
1246 case btos: // fall through
1247 case ctos:
1248 case stos: // fall through
1249 case atos: // fall through
1250 case itos: mov(Otos_l1, Otos_l1->after_save()); break; // O0 -> I0
1251 case ftos: // fall through
1252 case dtos: // fall through
1253 case vtos: /* nothing to do */ break;
1254 default : ShouldNotReachHere();
1255 }
1257 #if defined(COMPILER2) && !defined(_LP64)
1258 if (state == ltos) {
1259 // C2 expects long results in G1 we can't tell if we're returning to interpreted
1260 // or compiled so just be safe use G1 and O0/O1
1262 // Shift bits into high (msb) of G1
1263 sllx(Otos_l1->after_save(), 32, G1);
1264 // Zero extend low bits
1265 srl (Otos_l2->after_save(), 0, Otos_l2->after_save());
1266 or3 (Otos_l2->after_save(), G1, G1);
1267 }
1268 #endif /* COMPILER2 */
1270 }
1271 #endif /* CC_INTERP */
1274 // Lock object
1275 //
1276 // Argument - lock_reg points to the BasicObjectLock to be used for locking,
1277 // it must be initialized with the object to lock
1278 void InterpreterMacroAssembler::lock_object(Register lock_reg, Register Object) {
1279 if (UseHeavyMonitors) {
1280 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
1281 }
1282 else {
1283 Register obj_reg = Object;
1284 Register mark_reg = G4_scratch;
1285 Register temp_reg = G1_scratch;
1286 Address lock_addr = Address(lock_reg, 0, BasicObjectLock::lock_offset_in_bytes());
1287 Address mark_addr = Address(obj_reg, 0, oopDesc::mark_offset_in_bytes());
1288 Label done;
1290 Label slow_case;
1292 assert_different_registers(lock_reg, obj_reg, mark_reg, temp_reg);
1294 // load markOop from object into mark_reg
1295 ld_ptr(mark_addr, mark_reg);
1297 if (UseBiasedLocking) {
1298 biased_locking_enter(obj_reg, mark_reg, temp_reg, done, &slow_case);
1299 }
1301 // get the address of basicLock on stack that will be stored in the object
1302 // we need a temporary register here as we do not want to clobber lock_reg
1303 // (cas clobbers the destination register)
1304 mov(lock_reg, temp_reg);
1305 // set mark reg to be (markOop of object | UNLOCK_VALUE)
1306 or3(mark_reg, markOopDesc::unlocked_value, mark_reg);
1307 // initialize the box (Must happen before we update the object mark!)
1308 st_ptr(mark_reg, lock_addr, BasicLock::displaced_header_offset_in_bytes());
1309 // compare and exchange object_addr, markOop | 1, stack address of basicLock
1310 assert(mark_addr.disp() == 0, "cas must take a zero displacement");
1311 casx_under_lock(mark_addr.base(), mark_reg, temp_reg,
1312 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr());
1314 // if the compare and exchange succeeded we are done (we saw an unlocked object)
1315 cmp(mark_reg, temp_reg);
1316 brx(Assembler::equal, true, Assembler::pt, done);
1317 delayed()->nop();
1319 // We did not see an unlocked object so try the fast recursive case
1321 // Check if owner is self by comparing the value in the markOop of object
1322 // with the stack pointer
1323 sub(temp_reg, SP, temp_reg);
1324 #ifdef _LP64
1325 sub(temp_reg, STACK_BIAS, temp_reg);
1326 #endif
1327 assert(os::vm_page_size() > 0xfff, "page size too small - change the constant");
1329 // Composite "andcc" test:
1330 // (a) %sp -vs- markword proximity check, and,
1331 // (b) verify mark word LSBs == 0 (Stack-locked).
1332 //
1333 // FFFFF003/FFFFFFFFFFFF003 is (markOopDesc::lock_mask_in_place | -os::vm_page_size())
1334 // Note that the page size used for %sp proximity testing is arbitrary and is
1335 // unrelated to the actual MMU page size. We use a 'logical' page size of
1336 // 4096 bytes. F..FFF003 is designed to fit conveniently in the SIMM13 immediate
1337 // field of the andcc instruction.
1338 andcc (temp_reg, 0xFFFFF003, G0) ;
1340 // if condition is true we are done and hence we can store 0 in the displaced
1341 // header indicating it is a recursive lock and be done
1342 brx(Assembler::zero, true, Assembler::pt, done);
1343 delayed()->st_ptr(G0, lock_addr, BasicLock::displaced_header_offset_in_bytes());
1345 // none of the above fast optimizations worked so we have to get into the
1346 // slow case of monitor enter
1347 bind(slow_case);
1348 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
1350 bind(done);
1351 }
1352 }
1354 // Unlocks an object. Used in monitorexit bytecode and remove_activation.
1355 //
1356 // Argument - lock_reg points to the BasicObjectLock for lock
1357 // Throw IllegalMonitorException if object is not locked by current thread
1358 void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
1359 if (UseHeavyMonitors) {
1360 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
1361 } else {
1362 Register obj_reg = G3_scratch;
1363 Register mark_reg = G4_scratch;
1364 Register displaced_header_reg = G1_scratch;
1365 Address lock_addr = Address(lock_reg, 0, BasicObjectLock::lock_offset_in_bytes());
1366 Address lockobj_addr = Address(lock_reg, 0, BasicObjectLock::obj_offset_in_bytes());
1367 Address mark_addr = Address(obj_reg, 0, oopDesc::mark_offset_in_bytes());
1368 Label done;
1370 if (UseBiasedLocking) {
1371 // load the object out of the BasicObjectLock
1372 ld_ptr(lockobj_addr, obj_reg);
1373 biased_locking_exit(mark_addr, mark_reg, done, true);
1374 st_ptr(G0, lockobj_addr); // free entry
1375 }
1377 // Test first if we are in the fast recursive case
1378 ld_ptr(lock_addr, displaced_header_reg, BasicLock::displaced_header_offset_in_bytes());
1379 br_null(displaced_header_reg, true, Assembler::pn, done);
1380 delayed()->st_ptr(G0, lockobj_addr); // free entry
1382 // See if it is still a light weight lock, if so we just unlock
1383 // the object and we are done
1385 if (!UseBiasedLocking) {
1386 // load the object out of the BasicObjectLock
1387 ld_ptr(lockobj_addr, obj_reg);
1388 }
1390 // we have the displaced header in displaced_header_reg
1391 // we expect to see the stack address of the basicLock in case the
1392 // lock is still a light weight lock (lock_reg)
1393 assert(mark_addr.disp() == 0, "cas must take a zero displacement");
1394 casx_under_lock(mark_addr.base(), lock_reg, displaced_header_reg,
1395 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr());
1396 cmp(lock_reg, displaced_header_reg);
1397 brx(Assembler::equal, true, Assembler::pn, done);
1398 delayed()->st_ptr(G0, lockobj_addr); // free entry
1400 // The lock has been converted into a heavy lock and hence
1401 // we need to get into the slow case
1403 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
1405 bind(done);
1406 }
1407 }
1409 #ifndef CC_INTERP
1411 // Get the method data pointer from the methodOop and set the
1412 // specified register to its value.
1414 void InterpreterMacroAssembler::set_method_data_pointer_offset(Register Roff) {
1415 assert(ProfileInterpreter, "must be profiling interpreter");
1416 Label get_continue;
1418 ld_ptr(Lmethod, in_bytes(methodOopDesc::method_data_offset()), ImethodDataPtr);
1419 test_method_data_pointer(get_continue);
1420 add(ImethodDataPtr, in_bytes(methodDataOopDesc::data_offset()), ImethodDataPtr);
1421 if (Roff != noreg)
1422 // Roff contains a method data index ("mdi"). It defaults to zero.
1423 add(ImethodDataPtr, Roff, ImethodDataPtr);
1424 bind(get_continue);
1425 }
1427 // Set the method data pointer for the current bcp.
1429 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
1430 assert(ProfileInterpreter, "must be profiling interpreter");
1431 Label zero_continue;
1433 // Test MDO to avoid the call if it is NULL.
1434 ld_ptr(Lmethod, in_bytes(methodOopDesc::method_data_offset()), ImethodDataPtr);
1435 test_method_data_pointer(zero_continue);
1436 call_VM_leaf(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), Lmethod, Lbcp);
1437 set_method_data_pointer_offset(O0);
1438 bind(zero_continue);
1439 }
1441 // Test ImethodDataPtr. If it is null, continue at the specified label
1443 void InterpreterMacroAssembler::test_method_data_pointer(Label& zero_continue) {
1444 assert(ProfileInterpreter, "must be profiling interpreter");
1445 #ifdef _LP64
1446 bpr(Assembler::rc_z, false, Assembler::pn, ImethodDataPtr, zero_continue);
1447 #else
1448 tst(ImethodDataPtr);
1449 br(Assembler::zero, false, Assembler::pn, zero_continue);
1450 #endif
1451 delayed()->nop();
1452 }
1454 void InterpreterMacroAssembler::verify_method_data_pointer() {
1455 assert(ProfileInterpreter, "must be profiling interpreter");
1456 #ifdef ASSERT
1457 Label verify_continue;
1458 test_method_data_pointer(verify_continue);
1460 // If the mdp is valid, it will point to a DataLayout header which is
1461 // consistent with the bcp. The converse is highly probable also.
1462 lduh(ImethodDataPtr, in_bytes(DataLayout::bci_offset()), G3_scratch);
1463 ld_ptr(Address(Lmethod, 0, in_bytes(methodOopDesc::const_offset())), O5);
1464 add(G3_scratch, in_bytes(constMethodOopDesc::codes_offset()), G3_scratch);
1465 add(G3_scratch, O5, G3_scratch);
1466 cmp(Lbcp, G3_scratch);
1467 brx(Assembler::equal, false, Assembler::pt, verify_continue);
1469 Register temp_reg = O5;
1470 delayed()->mov(ImethodDataPtr, temp_reg);
1471 // %%% should use call_VM_leaf here?
1472 //call_VM_leaf(noreg, ..., Lmethod, Lbcp, ImethodDataPtr);
1473 save_frame_and_mov(sizeof(jdouble) / wordSize, Lmethod, O0, Lbcp, O1);
1474 Address d_save(FP, 0, -sizeof(jdouble) + STACK_BIAS);
1475 stf(FloatRegisterImpl::D, Ftos_d, d_save);
1476 mov(temp_reg->after_save(), O2);
1477 save_thread(L7_thread_cache);
1478 call(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), relocInfo::none);
1479 delayed()->nop();
1480 restore_thread(L7_thread_cache);
1481 ldf(FloatRegisterImpl::D, d_save, Ftos_d);
1482 restore();
1483 bind(verify_continue);
1484 #endif // ASSERT
1485 }
1487 void InterpreterMacroAssembler::test_invocation_counter_for_mdp(Register invocation_count,
1488 Register cur_bcp,
1489 Register Rtmp,
1490 Label &profile_continue) {
1491 assert(ProfileInterpreter, "must be profiling interpreter");
1492 // Control will flow to "profile_continue" if the counter is less than the
1493 // limit or if we call profile_method()
1495 Label done;
1497 // if no method data exists, and the counter is high enough, make one
1498 #ifdef _LP64
1499 bpr(Assembler::rc_nz, false, Assembler::pn, ImethodDataPtr, done);
1500 #else
1501 tst(ImethodDataPtr);
1502 br(Assembler::notZero, false, Assembler::pn, done);
1503 #endif
1505 // Test to see if we should create a method data oop
1506 Address profile_limit(Rtmp, (address)&InvocationCounter::InterpreterProfileLimit);
1507 #ifdef _LP64
1508 delayed()->nop();
1509 sethi(profile_limit);
1510 #else
1511 delayed()->sethi(profile_limit);
1512 #endif
1513 ld(profile_limit, Rtmp);
1514 cmp(invocation_count, Rtmp);
1515 br(Assembler::lessUnsigned, false, Assembler::pn, profile_continue);
1516 delayed()->nop();
1518 // Build it now.
1519 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method), cur_bcp);
1520 set_method_data_pointer_offset(O0);
1521 ba(false, profile_continue);
1522 delayed()->nop();
1523 bind(done);
1524 }
1526 // Store a value at some constant offset from the method data pointer.
1528 void InterpreterMacroAssembler::set_mdp_data_at(int constant, Register value) {
1529 assert(ProfileInterpreter, "must be profiling interpreter");
1530 st_ptr(value, ImethodDataPtr, constant);
1531 }
1533 void InterpreterMacroAssembler::increment_mdp_data_at(Address counter,
1534 Register bumped_count,
1535 bool decrement) {
1536 assert(ProfileInterpreter, "must be profiling interpreter");
1538 // Load the counter.
1539 ld_ptr(counter, bumped_count);
1541 if (decrement) {
1542 // Decrement the register. Set condition codes.
1543 subcc(bumped_count, DataLayout::counter_increment, bumped_count);
1545 // If the decrement causes the counter to overflow, stay negative
1546 Label L;
1547 brx(Assembler::negative, true, Assembler::pn, L);
1549 // Store the decremented counter, if it is still negative.
1550 delayed()->st_ptr(bumped_count, counter);
1551 bind(L);
1552 } else {
1553 // Increment the register. Set carry flag.
1554 addcc(bumped_count, DataLayout::counter_increment, bumped_count);
1556 // If the increment causes the counter to overflow, pull back by 1.
1557 assert(DataLayout::counter_increment == 1, "subc works");
1558 subc(bumped_count, G0, bumped_count);
1560 // Store the incremented counter.
1561 st_ptr(bumped_count, counter);
1562 }
1563 }
1565 // Increment the value at some constant offset from the method data pointer.
1567 void InterpreterMacroAssembler::increment_mdp_data_at(int constant,
1568 Register bumped_count,
1569 bool decrement) {
1570 // Locate the counter at a fixed offset from the mdp:
1571 Address counter(ImethodDataPtr, 0, constant);
1572 increment_mdp_data_at(counter, bumped_count, decrement);
1573 }
1575 // Increment the value at some non-fixed (reg + constant) offset from
1576 // the method data pointer.
1578 void InterpreterMacroAssembler::increment_mdp_data_at(Register reg,
1579 int constant,
1580 Register bumped_count,
1581 Register scratch2,
1582 bool decrement) {
1583 // Add the constant to reg to get the offset.
1584 add(ImethodDataPtr, reg, scratch2);
1585 Address counter(scratch2, 0, constant);
1586 increment_mdp_data_at(counter, bumped_count, decrement);
1587 }
1589 // Set a flag value at the current method data pointer position.
1590 // Updates a single byte of the header, to avoid races with other header bits.
1592 void InterpreterMacroAssembler::set_mdp_flag_at(int flag_constant,
1593 Register scratch) {
1594 assert(ProfileInterpreter, "must be profiling interpreter");
1595 // Load the data header
1596 ldub(ImethodDataPtr, in_bytes(DataLayout::flags_offset()), scratch);
1598 // Set the flag
1599 or3(scratch, flag_constant, scratch);
1601 // Store the modified header.
1602 stb(scratch, ImethodDataPtr, in_bytes(DataLayout::flags_offset()));
1603 }
1605 // Test the location at some offset from the method data pointer.
1606 // If it is not equal to value, branch to the not_equal_continue Label.
1607 // Set condition codes to match the nullness of the loaded value.
1609 void InterpreterMacroAssembler::test_mdp_data_at(int offset,
1610 Register value,
1611 Label& not_equal_continue,
1612 Register scratch) {
1613 assert(ProfileInterpreter, "must be profiling interpreter");
1614 ld_ptr(ImethodDataPtr, offset, scratch);
1615 cmp(value, scratch);
1616 brx(Assembler::notEqual, false, Assembler::pn, not_equal_continue);
1617 delayed()->tst(scratch);
1618 }
1620 // Update the method data pointer by the displacement located at some fixed
1621 // offset from the method data pointer.
1623 void InterpreterMacroAssembler::update_mdp_by_offset(int offset_of_disp,
1624 Register scratch) {
1625 assert(ProfileInterpreter, "must be profiling interpreter");
1626 ld_ptr(ImethodDataPtr, offset_of_disp, scratch);
1627 add(ImethodDataPtr, scratch, ImethodDataPtr);
1628 }
1630 // Update the method data pointer by the displacement located at the
1631 // offset (reg + offset_of_disp).
1633 void InterpreterMacroAssembler::update_mdp_by_offset(Register reg,
1634 int offset_of_disp,
1635 Register scratch) {
1636 assert(ProfileInterpreter, "must be profiling interpreter");
1637 add(reg, offset_of_disp, scratch);
1638 ld_ptr(ImethodDataPtr, scratch, scratch);
1639 add(ImethodDataPtr, scratch, ImethodDataPtr);
1640 }
1642 // Update the method data pointer by a simple constant displacement.
1644 void InterpreterMacroAssembler::update_mdp_by_constant(int constant) {
1645 assert(ProfileInterpreter, "must be profiling interpreter");
1646 add(ImethodDataPtr, constant, ImethodDataPtr);
1647 }
1649 // Update the method data pointer for a _ret bytecode whose target
1650 // was not among our cached targets.
1652 void InterpreterMacroAssembler::update_mdp_for_ret(TosState state,
1653 Register return_bci) {
1654 assert(ProfileInterpreter, "must be profiling interpreter");
1655 push(state);
1656 st_ptr(return_bci, l_tmp); // protect return_bci, in case it is volatile
1657 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci);
1658 ld_ptr(l_tmp, return_bci);
1659 pop(state);
1660 }
1662 // Count a taken branch in the bytecodes.
1664 void InterpreterMacroAssembler::profile_taken_branch(Register scratch, Register bumped_count) {
1665 if (ProfileInterpreter) {
1666 Label profile_continue;
1668 // If no method data exists, go to profile_continue.
1669 test_method_data_pointer(profile_continue);
1671 // We are taking a branch. Increment the taken count.
1672 increment_mdp_data_at(in_bytes(JumpData::taken_offset()), bumped_count);
1674 // The method data pointer needs to be updated to reflect the new target.
1675 update_mdp_by_offset(in_bytes(JumpData::displacement_offset()), scratch);
1676 bind (profile_continue);
1677 }
1678 }
1681 // Count a not-taken branch in the bytecodes.
1683 void InterpreterMacroAssembler::profile_not_taken_branch(Register scratch) {
1684 if (ProfileInterpreter) {
1685 Label profile_continue;
1687 // If no method data exists, go to profile_continue.
1688 test_method_data_pointer(profile_continue);
1690 // We are taking a branch. Increment the not taken count.
1691 increment_mdp_data_at(in_bytes(BranchData::not_taken_offset()), scratch);
1693 // The method data pointer needs to be updated to correspond to the
1694 // next bytecode.
1695 update_mdp_by_constant(in_bytes(BranchData::branch_data_size()));
1696 bind (profile_continue);
1697 }
1698 }
1701 // Count a non-virtual call in the bytecodes.
1703 void InterpreterMacroAssembler::profile_call(Register scratch) {
1704 if (ProfileInterpreter) {
1705 Label profile_continue;
1707 // If no method data exists, go to profile_continue.
1708 test_method_data_pointer(profile_continue);
1710 // We are making a call. Increment the count.
1711 increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch);
1713 // The method data pointer needs to be updated to reflect the new target.
1714 update_mdp_by_constant(in_bytes(CounterData::counter_data_size()));
1715 bind (profile_continue);
1716 }
1717 }
1720 // Count a final call in the bytecodes.
1722 void InterpreterMacroAssembler::profile_final_call(Register scratch) {
1723 if (ProfileInterpreter) {
1724 Label profile_continue;
1726 // If no method data exists, go to profile_continue.
1727 test_method_data_pointer(profile_continue);
1729 // We are making a call. Increment the count.
1730 increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch);
1732 // The method data pointer needs to be updated to reflect the new target.
1733 update_mdp_by_constant(in_bytes(VirtualCallData::virtual_call_data_size()));
1734 bind (profile_continue);
1735 }
1736 }
1739 // Count a virtual call in the bytecodes.
1741 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1742 Register scratch) {
1743 if (ProfileInterpreter) {
1744 Label profile_continue;
1746 // If no method data exists, go to profile_continue.
1747 test_method_data_pointer(profile_continue);
1749 // We are making a call. Increment the count.
1750 increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch);
1752 // Record the receiver type.
1753 record_klass_in_profile(receiver, scratch);
1755 // The method data pointer needs to be updated to reflect the new target.
1756 update_mdp_by_constant(in_bytes(VirtualCallData::virtual_call_data_size()));
1757 bind (profile_continue);
1758 }
1759 }
1761 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1762 Register receiver, Register scratch,
1763 int start_row, Label& done) {
1764 int last_row = VirtualCallData::row_limit() - 1;
1765 assert(start_row <= last_row, "must be work left to do");
1766 // Test this row for both the receiver and for null.
1767 // Take any of three different outcomes:
1768 // 1. found receiver => increment count and goto done
1769 // 2. found null => keep looking for case 1, maybe allocate this cell
1770 // 3. found something else => keep looking for cases 1 and 2
1771 // Case 3 is handled by a recursive call.
1772 for (int row = start_row; row <= last_row; row++) {
1773 Label next_test;
1774 bool test_for_null_also = (row == start_row);
1776 // See if the receiver is receiver[n].
1777 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
1778 test_mdp_data_at(recvr_offset, receiver, next_test, scratch);
1780 // The receiver is receiver[n]. Increment count[n].
1781 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
1782 increment_mdp_data_at(count_offset, scratch);
1783 ba(false, done);
1784 delayed()->nop();
1785 bind(next_test);
1787 if (test_for_null_also) {
1788 // Failed the equality check on receiver[n]... Test for null.
1789 if (start_row == last_row) {
1790 // The only thing left to do is handle the null case.
1791 brx(Assembler::notZero, false, Assembler::pt, done);
1792 delayed()->nop();
1793 break;
1794 }
1795 // Since null is rare, make it be the branch-taken case.
1796 Label found_null;
1797 brx(Assembler::zero, false, Assembler::pn, found_null);
1798 delayed()->nop();
1800 // Put all the "Case 3" tests here.
1801 record_klass_in_profile_helper(receiver, scratch, start_row + 1, done);
1803 // Found a null. Keep searching for a matching receiver,
1804 // but remember that this is an empty (unused) slot.
1805 bind(found_null);
1806 }
1807 }
1809 // In the fall-through case, we found no matching receiver, but we
1810 // observed the receiver[start_row] is NULL.
1812 // Fill in the receiver field and increment the count.
1813 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
1814 set_mdp_data_at(recvr_offset, receiver);
1815 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
1816 mov(DataLayout::counter_increment, scratch);
1817 set_mdp_data_at(count_offset, scratch);
1818 ba(false, done);
1819 delayed()->nop();
1820 }
1822 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1823 Register scratch) {
1824 assert(ProfileInterpreter, "must be profiling");
1825 Label done;
1827 record_klass_in_profile_helper(receiver, scratch, 0, done);
1829 bind (done);
1830 }
1833 // Count a ret in the bytecodes.
1835 void InterpreterMacroAssembler::profile_ret(TosState state,
1836 Register return_bci,
1837 Register scratch) {
1838 if (ProfileInterpreter) {
1839 Label profile_continue;
1840 uint row;
1842 // If no method data exists, go to profile_continue.
1843 test_method_data_pointer(profile_continue);
1845 // Update the total ret count.
1846 increment_mdp_data_at(in_bytes(CounterData::count_offset()), scratch);
1848 for (row = 0; row < RetData::row_limit(); row++) {
1849 Label next_test;
1851 // See if return_bci is equal to bci[n]:
1852 test_mdp_data_at(in_bytes(RetData::bci_offset(row)),
1853 return_bci, next_test, scratch);
1855 // return_bci is equal to bci[n]. Increment the count.
1856 increment_mdp_data_at(in_bytes(RetData::bci_count_offset(row)), scratch);
1858 // The method data pointer needs to be updated to reflect the new target.
1859 update_mdp_by_offset(in_bytes(RetData::bci_displacement_offset(row)), scratch);
1860 ba(false, profile_continue);
1861 delayed()->nop();
1862 bind(next_test);
1863 }
1865 update_mdp_for_ret(state, return_bci);
1867 bind (profile_continue);
1868 }
1869 }
1871 // Profile an unexpected null in the bytecodes.
1872 void InterpreterMacroAssembler::profile_null_seen(Register scratch) {
1873 if (ProfileInterpreter) {
1874 Label profile_continue;
1876 // If no method data exists, go to profile_continue.
1877 test_method_data_pointer(profile_continue);
1879 set_mdp_flag_at(BitData::null_seen_byte_constant(), scratch);
1881 // The method data pointer needs to be updated.
1882 int mdp_delta = in_bytes(BitData::bit_data_size());
1883 if (TypeProfileCasts) {
1884 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1885 }
1886 update_mdp_by_constant(mdp_delta);
1888 bind (profile_continue);
1889 }
1890 }
1892 void InterpreterMacroAssembler::profile_typecheck(Register klass,
1893 Register scratch) {
1894 if (ProfileInterpreter) {
1895 Label profile_continue;
1897 // If no method data exists, go to profile_continue.
1898 test_method_data_pointer(profile_continue);
1900 int mdp_delta = in_bytes(BitData::bit_data_size());
1901 if (TypeProfileCasts) {
1902 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1904 // Record the object type.
1905 record_klass_in_profile(klass, scratch);
1906 }
1908 // The method data pointer needs to be updated.
1909 update_mdp_by_constant(mdp_delta);
1911 bind (profile_continue);
1912 }
1913 }
1915 void InterpreterMacroAssembler::profile_typecheck_failed(Register scratch) {
1916 if (ProfileInterpreter && TypeProfileCasts) {
1917 Label profile_continue;
1919 // If no method data exists, go to profile_continue.
1920 test_method_data_pointer(profile_continue);
1922 int count_offset = in_bytes(CounterData::count_offset());
1923 // Back up the address, since we have already bumped the mdp.
1924 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1926 // *Decrement* the counter. We expect to see zero or small negatives.
1927 increment_mdp_data_at(count_offset, scratch, true);
1929 bind (profile_continue);
1930 }
1931 }
1933 // Count the default case of a switch construct.
1935 void InterpreterMacroAssembler::profile_switch_default(Register scratch) {
1936 if (ProfileInterpreter) {
1937 Label profile_continue;
1939 // If no method data exists, go to profile_continue.
1940 test_method_data_pointer(profile_continue);
1942 // Update the default case count
1943 increment_mdp_data_at(in_bytes(MultiBranchData::default_count_offset()),
1944 scratch);
1946 // The method data pointer needs to be updated.
1947 update_mdp_by_offset(
1948 in_bytes(MultiBranchData::default_displacement_offset()),
1949 scratch);
1951 bind (profile_continue);
1952 }
1953 }
1955 // Count the index'th case of a switch construct.
1957 void InterpreterMacroAssembler::profile_switch_case(Register index,
1958 Register scratch,
1959 Register scratch2,
1960 Register scratch3) {
1961 if (ProfileInterpreter) {
1962 Label profile_continue;
1964 // If no method data exists, go to profile_continue.
1965 test_method_data_pointer(profile_continue);
1967 // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes()
1968 set(in_bytes(MultiBranchData::per_case_size()), scratch);
1969 smul(index, scratch, scratch);
1970 add(scratch, in_bytes(MultiBranchData::case_array_offset()), scratch);
1972 // Update the case count
1973 increment_mdp_data_at(scratch,
1974 in_bytes(MultiBranchData::relative_count_offset()),
1975 scratch2,
1976 scratch3);
1978 // The method data pointer needs to be updated.
1979 update_mdp_by_offset(scratch,
1980 in_bytes(MultiBranchData::relative_displacement_offset()),
1981 scratch2);
1983 bind (profile_continue);
1984 }
1985 }
1987 // add a InterpMonitorElem to stack (see frame_sparc.hpp)
1989 void InterpreterMacroAssembler::add_monitor_to_stack( bool stack_is_empty,
1990 Register Rtemp,
1991 Register Rtemp2 ) {
1993 Register Rlimit = Lmonitors;
1994 const jint delta = frame::interpreter_frame_monitor_size() * wordSize;
1995 assert( (delta & LongAlignmentMask) == 0,
1996 "sizeof BasicObjectLock must be even number of doublewords");
1998 sub( SP, delta, SP);
1999 sub( Lesp, delta, Lesp);
2000 sub( Lmonitors, delta, Lmonitors);
2002 if (!stack_is_empty) {
2004 // must copy stack contents down
2006 Label start_copying, next;
2008 // untested("monitor stack expansion");
2009 compute_stack_base(Rtemp);
2010 ba( false, start_copying );
2011 delayed()->cmp( Rtemp, Rlimit); // done? duplicated below
2013 // note: must copy from low memory upwards
2014 // On entry to loop,
2015 // Rtemp points to new base of stack, Lesp points to new end of stack (1 past TOS)
2016 // Loop mutates Rtemp
2018 bind( next);
2020 st_ptr(Rtemp2, Rtemp, 0);
2021 inc(Rtemp, wordSize);
2022 cmp(Rtemp, Rlimit); // are we done? (duplicated above)
2024 bind( start_copying );
2026 brx( notEqual, true, pn, next );
2027 delayed()->ld_ptr( Rtemp, delta, Rtemp2 );
2029 // done copying stack
2030 }
2031 }
2033 // Locals
2034 #ifdef ASSERT
2035 void InterpreterMacroAssembler::verify_local_tag(frame::Tag t,
2036 Register base,
2037 Register scratch,
2038 int n) {
2039 if (TaggedStackInterpreter) {
2040 Label ok, long_ok;
2041 // Use dst for scratch
2042 assert_different_registers(base, scratch);
2043 ld_ptr(base, Interpreter::local_tag_offset_in_bytes(n), scratch);
2044 if (t == frame::TagCategory2) {
2045 cmp(scratch, G0);
2046 brx(Assembler::equal, false, Assembler::pt, long_ok);
2047 delayed()->ld_ptr(base, Interpreter::local_tag_offset_in_bytes(n+1), scratch);
2048 stop("local long/double tag value bad");
2049 bind(long_ok);
2050 // compare second half tag
2051 cmp(scratch, G0);
2052 } else if (t == frame::TagValue) {
2053 cmp(scratch, G0);
2054 } else {
2055 assert_different_registers(O3, base, scratch);
2056 mov(t, O3);
2057 cmp(scratch, O3);
2058 }
2059 brx(Assembler::equal, false, Assembler::pt, ok);
2060 delayed()->nop();
2061 // Also compare if the local value is zero, then the tag might
2062 // not have been set coming from deopt.
2063 ld_ptr(base, Interpreter::local_offset_in_bytes(n), scratch);
2064 cmp(scratch, G0);
2065 brx(Assembler::equal, false, Assembler::pt, ok);
2066 delayed()->nop();
2067 stop("Local tag value is bad");
2068 bind(ok);
2069 }
2070 }
2071 #endif // ASSERT
2073 void InterpreterMacroAssembler::access_local_ptr( Register index, Register dst ) {
2074 assert_not_delayed();
2075 sll(index, Interpreter::logStackElementSize(), index);
2076 sub(Llocals, index, index);
2077 debug_only(verify_local_tag(frame::TagReference, index, dst));
2078 ld_ptr(index, Interpreter::value_offset_in_bytes(), dst);
2079 // Note: index must hold the effective address--the iinc template uses it
2080 }
2082 // Just like access_local_ptr but the tag is a returnAddress
2083 void InterpreterMacroAssembler::access_local_returnAddress(Register index,
2084 Register dst ) {
2085 assert_not_delayed();
2086 sll(index, Interpreter::logStackElementSize(), index);
2087 sub(Llocals, index, index);
2088 debug_only(verify_local_tag(frame::TagValue, index, dst));
2089 ld_ptr(index, Interpreter::value_offset_in_bytes(), dst);
2090 }
2092 void InterpreterMacroAssembler::access_local_int( Register index, Register dst ) {
2093 assert_not_delayed();
2094 sll(index, Interpreter::logStackElementSize(), index);
2095 sub(Llocals, index, index);
2096 debug_only(verify_local_tag(frame::TagValue, index, dst));
2097 ld(index, Interpreter::value_offset_in_bytes(), dst);
2098 // Note: index must hold the effective address--the iinc template uses it
2099 }
2102 void InterpreterMacroAssembler::access_local_long( Register index, Register dst ) {
2103 assert_not_delayed();
2104 sll(index, Interpreter::logStackElementSize(), index);
2105 sub(Llocals, index, index);
2106 debug_only(verify_local_tag(frame::TagCategory2, index, dst));
2107 // First half stored at index n+1 (which grows down from Llocals[n])
2108 load_unaligned_long(index, Interpreter::local_offset_in_bytes(1), dst);
2109 }
2112 void InterpreterMacroAssembler::access_local_float( Register index, FloatRegister dst ) {
2113 assert_not_delayed();
2114 sll(index, Interpreter::logStackElementSize(), index);
2115 sub(Llocals, index, index);
2116 debug_only(verify_local_tag(frame::TagValue, index, G1_scratch));
2117 ldf(FloatRegisterImpl::S, index, Interpreter::value_offset_in_bytes(), dst);
2118 }
2121 void InterpreterMacroAssembler::access_local_double( Register index, FloatRegister dst ) {
2122 assert_not_delayed();
2123 sll(index, Interpreter::logStackElementSize(), index);
2124 sub(Llocals, index, index);
2125 debug_only(verify_local_tag(frame::TagCategory2, index, G1_scratch));
2126 load_unaligned_double(index, Interpreter::local_offset_in_bytes(1), dst);
2127 }
2130 #ifdef ASSERT
2131 void InterpreterMacroAssembler::check_for_regarea_stomp(Register Rindex, int offset, Register Rlimit, Register Rscratch, Register Rscratch1) {
2132 Label L;
2134 assert(Rindex != Rscratch, "Registers cannot be same");
2135 assert(Rindex != Rscratch1, "Registers cannot be same");
2136 assert(Rlimit != Rscratch, "Registers cannot be same");
2137 assert(Rlimit != Rscratch1, "Registers cannot be same");
2138 assert(Rscratch1 != Rscratch, "Registers cannot be same");
2140 // untested("reg area corruption");
2141 add(Rindex, offset, Rscratch);
2142 add(Rlimit, 64 + STACK_BIAS, Rscratch1);
2143 cmp(Rscratch, Rscratch1);
2144 brx(Assembler::greaterEqualUnsigned, false, pn, L);
2145 delayed()->nop();
2146 stop("regsave area is being clobbered");
2147 bind(L);
2148 }
2149 #endif // ASSERT
2151 void InterpreterMacroAssembler::tag_local(frame::Tag t,
2152 Register base,
2153 Register src,
2154 int n) {
2155 if (TaggedStackInterpreter) {
2156 // have to store zero because local slots can be reused (rats!)
2157 if (t == frame::TagValue) {
2158 st_ptr(G0, base, Interpreter::local_tag_offset_in_bytes(n));
2159 } else if (t == frame::TagCategory2) {
2160 st_ptr(G0, base, Interpreter::local_tag_offset_in_bytes(n));
2161 st_ptr(G0, base, Interpreter::local_tag_offset_in_bytes(n+1));
2162 } else {
2163 // assert that we don't stomp the value in 'src'
2164 // O3 is arbitrary because it's not used.
2165 assert_different_registers(src, base, O3);
2166 mov( t, O3);
2167 st_ptr(O3, base, Interpreter::local_tag_offset_in_bytes(n));
2168 }
2169 }
2170 }
2173 void InterpreterMacroAssembler::store_local_int( Register index, Register src ) {
2174 assert_not_delayed();
2175 sll(index, Interpreter::logStackElementSize(), index);
2176 sub(Llocals, index, index);
2177 debug_only(check_for_regarea_stomp(index, Interpreter::value_offset_in_bytes(), FP, G1_scratch, G4_scratch);)
2178 tag_local(frame::TagValue, index, src);
2179 st(src, index, Interpreter::value_offset_in_bytes());
2180 }
2182 void InterpreterMacroAssembler::store_local_ptr( Register index, Register src,
2183 Register tag ) {
2184 assert_not_delayed();
2185 sll(index, Interpreter::logStackElementSize(), index);
2186 sub(Llocals, index, index);
2187 #ifdef ASSERT
2188 check_for_regarea_stomp(index, Interpreter::value_offset_in_bytes(), FP, G1_scratch, G4_scratch);
2189 #endif
2190 st_ptr(src, index, Interpreter::value_offset_in_bytes());
2191 // Store tag register directly
2192 if (TaggedStackInterpreter) {
2193 st_ptr(tag, index, Interpreter::tag_offset_in_bytes());
2194 }
2195 }
2199 void InterpreterMacroAssembler::store_local_ptr( int n, Register src,
2200 Register tag ) {
2201 st_ptr(src, Llocals, Interpreter::local_offset_in_bytes(n));
2202 if (TaggedStackInterpreter) {
2203 st_ptr(tag, Llocals, Interpreter::local_tag_offset_in_bytes(n));
2204 }
2205 }
2207 void InterpreterMacroAssembler::store_local_long( Register index, Register src ) {
2208 assert_not_delayed();
2209 sll(index, Interpreter::logStackElementSize(), index);
2210 sub(Llocals, index, index);
2211 #ifdef ASSERT
2212 check_for_regarea_stomp(index, Interpreter::local_offset_in_bytes(1), FP, G1_scratch, G4_scratch);
2213 #endif
2214 tag_local(frame::TagCategory2, index, src);
2215 store_unaligned_long(src, index, Interpreter::local_offset_in_bytes(1)); // which is n+1
2216 }
2219 void InterpreterMacroAssembler::store_local_float( Register index, FloatRegister src ) {
2220 assert_not_delayed();
2221 sll(index, Interpreter::logStackElementSize(), index);
2222 sub(Llocals, index, index);
2223 #ifdef ASSERT
2224 check_for_regarea_stomp(index, Interpreter::value_offset_in_bytes(), FP, G1_scratch, G4_scratch);
2225 #endif
2226 tag_local(frame::TagValue, index, G1_scratch);
2227 stf(FloatRegisterImpl::S, src, index, Interpreter::value_offset_in_bytes());
2228 }
2231 void InterpreterMacroAssembler::store_local_double( Register index, FloatRegister src ) {
2232 assert_not_delayed();
2233 sll(index, Interpreter::logStackElementSize(), index);
2234 sub(Llocals, index, index);
2235 #ifdef ASSERT
2236 check_for_regarea_stomp(index, Interpreter::local_offset_in_bytes(1), FP, G1_scratch, G4_scratch);
2237 #endif
2238 tag_local(frame::TagCategory2, index, G1_scratch);
2239 store_unaligned_double(src, index, Interpreter::local_offset_in_bytes(1));
2240 }
2243 int InterpreterMacroAssembler::top_most_monitor_byte_offset() {
2244 const jint delta = frame::interpreter_frame_monitor_size() * wordSize;
2245 int rounded_vm_local_words = ::round_to(frame::interpreter_frame_vm_local_words, WordsPerLong);
2246 return ((-rounded_vm_local_words * wordSize) - delta ) + STACK_BIAS;
2247 }
2250 Address InterpreterMacroAssembler::top_most_monitor() {
2251 return Address(FP, 0, top_most_monitor_byte_offset());
2252 }
2255 void InterpreterMacroAssembler::compute_stack_base( Register Rdest ) {
2256 add( Lesp, wordSize, Rdest );
2257 }
2259 #endif /* CC_INTERP */
2261 void InterpreterMacroAssembler::increment_invocation_counter( Register Rtmp, Register Rtmp2 ) {
2262 assert(UseCompiler, "incrementing must be useful");
2263 #ifdef CC_INTERP
2264 Address inv_counter(G5_method, 0, in_bytes(methodOopDesc::invocation_counter_offset()
2265 + InvocationCounter::counter_offset()));
2266 Address be_counter(G5_method, 0, in_bytes(methodOopDesc::backedge_counter_offset()
2267 + InvocationCounter::counter_offset()));
2268 #else
2269 Address inv_counter(Lmethod, 0, in_bytes(methodOopDesc::invocation_counter_offset()
2270 + InvocationCounter::counter_offset()));
2271 Address be_counter(Lmethod, 0, in_bytes(methodOopDesc::backedge_counter_offset()
2272 + InvocationCounter::counter_offset()));
2273 #endif /* CC_INTERP */
2274 int delta = InvocationCounter::count_increment;
2276 // Load each counter in a register
2277 ld( inv_counter, Rtmp );
2278 ld( be_counter, Rtmp2 );
2280 assert( is_simm13( delta ), " delta too large.");
2282 // Add the delta to the invocation counter and store the result
2283 add( Rtmp, delta, Rtmp );
2285 // Mask the backedge counter
2286 and3( Rtmp2, InvocationCounter::count_mask_value, Rtmp2 );
2288 // Store value
2289 st( Rtmp, inv_counter);
2291 // Add invocation counter + backedge counter
2292 add( Rtmp, Rtmp2, Rtmp);
2294 // Note that this macro must leave the backedge_count + invocation_count in Rtmp!
2295 }
2297 void InterpreterMacroAssembler::increment_backedge_counter( Register Rtmp, Register Rtmp2 ) {
2298 assert(UseCompiler, "incrementing must be useful");
2299 #ifdef CC_INTERP
2300 Address be_counter(G5_method, 0, in_bytes(methodOopDesc::backedge_counter_offset()
2301 + InvocationCounter::counter_offset()));
2302 Address inv_counter(G5_method, 0, in_bytes(methodOopDesc::invocation_counter_offset()
2303 + InvocationCounter::counter_offset()));
2304 #else
2305 Address be_counter(Lmethod, 0, in_bytes(methodOopDesc::backedge_counter_offset()
2306 + InvocationCounter::counter_offset()));
2307 Address inv_counter(Lmethod, 0, in_bytes(methodOopDesc::invocation_counter_offset()
2308 + InvocationCounter::counter_offset()));
2309 #endif /* CC_INTERP */
2310 int delta = InvocationCounter::count_increment;
2311 // Load each counter in a register
2312 ld( be_counter, Rtmp );
2313 ld( inv_counter, Rtmp2 );
2315 // Add the delta to the backedge counter
2316 add( Rtmp, delta, Rtmp );
2318 // Mask the invocation counter, add to backedge counter
2319 and3( Rtmp2, InvocationCounter::count_mask_value, Rtmp2 );
2321 // and store the result to memory
2322 st( Rtmp, be_counter );
2324 // Add backedge + invocation counter
2325 add( Rtmp, Rtmp2, Rtmp );
2327 // Note that this macro must leave backedge_count + invocation_count in Rtmp!
2328 }
2330 #ifndef CC_INTERP
2331 void InterpreterMacroAssembler::test_backedge_count_for_osr( Register backedge_count,
2332 Register branch_bcp,
2333 Register Rtmp ) {
2334 Label did_not_overflow;
2335 Label overflow_with_error;
2336 assert_different_registers(backedge_count, Rtmp, branch_bcp);
2337 assert(UseOnStackReplacement,"Must UseOnStackReplacement to test_backedge_count_for_osr");
2339 Address limit(Rtmp, address(&InvocationCounter::InterpreterBackwardBranchLimit));
2340 load_contents(limit, Rtmp);
2341 cmp(backedge_count, Rtmp);
2342 br(Assembler::lessUnsigned, false, Assembler::pt, did_not_overflow);
2343 delayed()->nop();
2345 // When ProfileInterpreter is on, the backedge_count comes from the
2346 // methodDataOop, which value does not get reset on the call to
2347 // frequency_counter_overflow(). To avoid excessive calls to the overflow
2348 // routine while the method is being compiled, add a second test to make sure
2349 // the overflow function is called only once every overflow_frequency.
2350 if (ProfileInterpreter) {
2351 const int overflow_frequency = 1024;
2352 andcc(backedge_count, overflow_frequency-1, Rtmp);
2353 brx(Assembler::notZero, false, Assembler::pt, did_not_overflow);
2354 delayed()->nop();
2355 }
2357 // overflow in loop, pass branch bytecode
2358 set(6,Rtmp);
2359 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), branch_bcp, Rtmp);
2361 // Was an OSR adapter generated?
2362 // O0 = osr nmethod
2363 tst(O0);
2364 brx(Assembler::zero, false, Assembler::pn, overflow_with_error);
2365 delayed()->nop();
2367 // Has the nmethod been invalidated already?
2368 ld(O0, nmethod::entry_bci_offset(), O2);
2369 cmp(O2, InvalidOSREntryBci);
2370 br(Assembler::equal, false, Assembler::pn, overflow_with_error);
2371 delayed()->nop();
2373 // migrate the interpreter frame off of the stack
2375 mov(G2_thread, L7);
2376 // save nmethod
2377 mov(O0, L6);
2378 set_last_Java_frame(SP, noreg);
2379 call_VM_leaf(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::OSR_migration_begin), L7);
2380 reset_last_Java_frame();
2381 mov(L7, G2_thread);
2383 // move OSR nmethod to I1
2384 mov(L6, I1);
2386 // OSR buffer to I0
2387 mov(O0, I0);
2389 // remove the interpreter frame
2390 restore(I5_savedSP, 0, SP);
2392 // Jump to the osr code.
2393 ld_ptr(O1, nmethod::osr_entry_point_offset(), O2);
2394 jmp(O2, G0);
2395 delayed()->nop();
2397 bind(overflow_with_error);
2399 bind(did_not_overflow);
2400 }
2404 void InterpreterMacroAssembler::interp_verify_oop(Register reg, TosState state, const char * file, int line) {
2405 if (state == atos) { MacroAssembler::_verify_oop(reg, "broken oop ", file, line); }
2406 }
2409 // local helper function for the verify_oop_or_return_address macro
2410 static bool verify_return_address(methodOopDesc* m, int bci) {
2411 #ifndef PRODUCT
2412 address pc = (address)(m->constMethod())
2413 + in_bytes(constMethodOopDesc::codes_offset()) + bci;
2414 // assume it is a valid return address if it is inside m and is preceded by a jsr
2415 if (!m->contains(pc)) return false;
2416 address jsr_pc;
2417 jsr_pc = pc - Bytecodes::length_for(Bytecodes::_jsr);
2418 if (*jsr_pc == Bytecodes::_jsr && jsr_pc >= m->code_base()) return true;
2419 jsr_pc = pc - Bytecodes::length_for(Bytecodes::_jsr_w);
2420 if (*jsr_pc == Bytecodes::_jsr_w && jsr_pc >= m->code_base()) return true;
2421 #endif // PRODUCT
2422 return false;
2423 }
2426 void InterpreterMacroAssembler::verify_oop_or_return_address(Register reg, Register Rtmp) {
2427 if (!VerifyOops) return;
2428 // the VM documentation for the astore[_wide] bytecode allows
2429 // the TOS to be not only an oop but also a return address
2430 Label test;
2431 Label skip;
2432 // See if it is an address (in the current method):
2434 mov(reg, Rtmp);
2435 const int log2_bytecode_size_limit = 16;
2436 srl(Rtmp, log2_bytecode_size_limit, Rtmp);
2437 br_notnull( Rtmp, false, pt, test );
2438 delayed()->nop();
2440 // %%% should use call_VM_leaf here?
2441 save_frame_and_mov(0, Lmethod, O0, reg, O1);
2442 save_thread(L7_thread_cache);
2443 call(CAST_FROM_FN_PTR(address,verify_return_address), relocInfo::none);
2444 delayed()->nop();
2445 restore_thread(L7_thread_cache);
2446 br_notnull( O0, false, pt, skip );
2447 delayed()->restore();
2449 // Perform a more elaborate out-of-line call
2450 // Not an address; verify it:
2451 bind(test);
2452 verify_oop(reg);
2453 bind(skip);
2454 }
2457 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
2458 if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth);
2459 }
2460 #endif /* CC_INTERP */
2462 // Inline assembly for:
2463 //
2464 // if (thread is in interp_only_mode) {
2465 // InterpreterRuntime::post_method_entry();
2466 // }
2467 // if (DTraceMethodProbes) {
2468 // SharedRuntime::dtrace_method_entry(method, receiver);
2469 // }
2471 void InterpreterMacroAssembler::notify_method_entry() {
2473 // C++ interpreter only uses this for native methods.
2475 // Whenever JVMTI puts a thread in interp_only_mode, method
2476 // entry/exit events are sent for that thread to track stack
2477 // depth. If it is possible to enter interp_only_mode we add
2478 // the code to check if the event should be sent.
2479 if (JvmtiExport::can_post_interpreter_events()) {
2480 Label L;
2481 Register temp_reg = O5;
2483 const Address interp_only (G2_thread, 0, in_bytes(JavaThread::interp_only_mode_offset()));
2485 ld(interp_only, temp_reg);
2486 tst(temp_reg);
2487 br(zero, false, pt, L);
2488 delayed()->nop();
2489 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry));
2490 bind(L);
2491 }
2493 {
2494 Register temp_reg = O5;
2495 SkipIfEqual skip_if(this, temp_reg, &DTraceMethodProbes, zero);
2496 call_VM_leaf(noreg,
2497 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
2498 G2_thread, Lmethod);
2499 }
2500 }
2503 // Inline assembly for:
2504 //
2505 // if (thread is in interp_only_mode) {
2506 // // save result
2507 // InterpreterRuntime::post_method_exit();
2508 // // restore result
2509 // }
2510 // if (DTraceMethodProbes) {
2511 // SharedRuntime::dtrace_method_exit(thread, method);
2512 // }
2513 //
2514 // Native methods have their result stored in d_tmp and l_tmp
2515 // Java methods have their result stored in the expression stack
2517 void InterpreterMacroAssembler::notify_method_exit(bool is_native_method,
2518 TosState state,
2519 NotifyMethodExitMode mode) {
2520 // C++ interpreter only uses this for native methods.
2522 // Whenever JVMTI puts a thread in interp_only_mode, method
2523 // entry/exit events are sent for that thread to track stack
2524 // depth. If it is possible to enter interp_only_mode we add
2525 // the code to check if the event should be sent.
2526 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
2527 Label L;
2528 Register temp_reg = O5;
2530 const Address interp_only (G2_thread, 0, in_bytes(JavaThread::interp_only_mode_offset()));
2532 ld(interp_only, temp_reg);
2533 tst(temp_reg);
2534 br(zero, false, pt, L);
2535 delayed()->nop();
2537 // Note: frame::interpreter_frame_result has a dependency on how the
2538 // method result is saved across the call to post_method_exit. For
2539 // native methods it assumes the result registers are saved to
2540 // l_scratch and d_scratch. If this changes then the interpreter_frame_result
2541 // implementation will need to be updated too.
2543 save_return_value(state, is_native_method);
2544 call_VM(noreg,
2545 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
2546 restore_return_value(state, is_native_method);
2547 bind(L);
2548 }
2550 {
2551 Register temp_reg = O5;
2552 // Dtrace notification
2553 SkipIfEqual skip_if(this, temp_reg, &DTraceMethodProbes, zero);
2554 save_return_value(state, is_native_method);
2555 call_VM_leaf(
2556 noreg,
2557 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
2558 G2_thread, Lmethod);
2559 restore_return_value(state, is_native_method);
2560 }
2561 }
2563 void InterpreterMacroAssembler::save_return_value(TosState state, bool is_native_call) {
2564 #ifdef CC_INTERP
2565 // result potentially in O0/O1: save it across calls
2566 stf(FloatRegisterImpl::D, F0, STATE(_native_fresult));
2567 #ifdef _LP64
2568 stx(O0, STATE(_native_lresult));
2569 #else
2570 std(O0, STATE(_native_lresult));
2571 #endif
2572 #else // CC_INTERP
2573 if (is_native_call) {
2574 stf(FloatRegisterImpl::D, F0, d_tmp);
2575 #ifdef _LP64
2576 stx(O0, l_tmp);
2577 #else
2578 std(O0, l_tmp);
2579 #endif
2580 } else {
2581 push(state);
2582 }
2583 #endif // CC_INTERP
2584 }
2586 void InterpreterMacroAssembler::restore_return_value( TosState state, bool is_native_call) {
2587 #ifdef CC_INTERP
2588 ldf(FloatRegisterImpl::D, STATE(_native_fresult), F0);
2589 #ifdef _LP64
2590 ldx(STATE(_native_lresult), O0);
2591 #else
2592 ldd(STATE(_native_lresult), O0);
2593 #endif
2594 #else // CC_INTERP
2595 if (is_native_call) {
2596 ldf(FloatRegisterImpl::D, d_tmp, F0);
2597 #ifdef _LP64
2598 ldx(l_tmp, O0);
2599 #else
2600 ldd(l_tmp, O0);
2601 #endif
2602 } else {
2603 pop(state);
2604 }
2605 #endif // CC_INTERP
2606 }