Thu, 15 Aug 2013 20:04:10 -0400
8003424: Enable Class Data Sharing for CompressedOops
8016729: ObjectAlignmentInBytes=16 now forces the use of heap based compressed oops
8005933: The -Xshare:auto option is ignored for -server
Summary: Move klass metaspace above the heap and support CDS with compressed klass ptrs.
Reviewed-by: coleenp, kvn, mgerdin, tschatzl, stefank
1 //
2 // Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 //
5 // This code is free software; you can redistribute it and/or modify it
6 // under the terms of the GNU General Public License version 2 only, as
7 // published by the Free Software Foundation.
8 //
9 // This code is distributed in the hope that it will be useful, but WITHOUT
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 // version 2 for more details (a copy is included in the LICENSE file that
13 // accompanied this code).
14 //
15 // You should have received a copy of the GNU General Public License version
16 // 2 along with this work; if not, write to the Free Software Foundation,
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 //
19 // Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 // or visit www.oracle.com if you need additional information or have any
21 // questions.
22 //
23 //
25 // X86 Architecture Description File
27 //----------REGISTER DEFINITION BLOCK------------------------------------------
28 // This information is used by the matcher and the register allocator to
29 // describe individual registers and classes of registers within the target
30 // archtecture.
32 register %{
33 //----------Architecture Description Register Definitions----------------------
34 // General Registers
35 // "reg_def" name ( register save type, C convention save type,
36 // ideal register type, encoding );
37 // Register Save Types:
38 //
39 // NS = No-Save: The register allocator assumes that these registers
40 // can be used without saving upon entry to the method, &
41 // that they do not need to be saved at call sites.
42 //
43 // SOC = Save-On-Call: The register allocator assumes that these registers
44 // can be used without saving upon entry to the method,
45 // but that they must be saved at call sites.
46 //
47 // SOE = Save-On-Entry: The register allocator assumes that these registers
48 // must be saved before using them upon entry to the
49 // method, but they do not need to be saved at call
50 // sites.
51 //
52 // AS = Always-Save: The register allocator assumes that these registers
53 // must be saved before using them upon entry to the
54 // method, & that they must be saved at call sites.
55 //
56 // Ideal Register Type is used to determine how to save & restore a
57 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get
58 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI.
59 //
60 // The encoding number is the actual bit-pattern placed into the opcodes.
62 // General Registers
63 // Previously set EBX, ESI, and EDI as save-on-entry for java code
64 // Turn off SOE in java-code due to frequent use of uncommon-traps.
65 // Now that allocator is better, turn on ESI and EDI as SOE registers.
67 reg_def EBX(SOC, SOE, Op_RegI, 3, rbx->as_VMReg());
68 reg_def ECX(SOC, SOC, Op_RegI, 1, rcx->as_VMReg());
69 reg_def ESI(SOC, SOE, Op_RegI, 6, rsi->as_VMReg());
70 reg_def EDI(SOC, SOE, Op_RegI, 7, rdi->as_VMReg());
71 // now that adapter frames are gone EBP is always saved and restored by the prolog/epilog code
72 reg_def EBP(NS, SOE, Op_RegI, 5, rbp->as_VMReg());
73 reg_def EDX(SOC, SOC, Op_RegI, 2, rdx->as_VMReg());
74 reg_def EAX(SOC, SOC, Op_RegI, 0, rax->as_VMReg());
75 reg_def ESP( NS, NS, Op_RegI, 4, rsp->as_VMReg());
77 // Float registers. We treat TOS/FPR0 special. It is invisible to the
78 // allocator, and only shows up in the encodings.
79 reg_def FPR0L( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
80 reg_def FPR0H( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
81 // Ok so here's the trick FPR1 is really st(0) except in the midst
82 // of emission of assembly for a machnode. During the emission the fpu stack
83 // is pushed making FPR1 == st(1) temporarily. However at any safepoint
84 // the stack will not have this element so FPR1 == st(0) from the
85 // oopMap viewpoint. This same weirdness with numbering causes
86 // instruction encoding to have to play games with the register
87 // encode to correct for this 0/1 issue. See MachSpillCopyNode::implementation
88 // where it does flt->flt moves to see an example
89 //
90 reg_def FPR1L( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg());
91 reg_def FPR1H( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg()->next());
92 reg_def FPR2L( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg());
93 reg_def FPR2H( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg()->next());
94 reg_def FPR3L( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg());
95 reg_def FPR3H( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg()->next());
96 reg_def FPR4L( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg());
97 reg_def FPR4H( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg()->next());
98 reg_def FPR5L( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg());
99 reg_def FPR5H( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg()->next());
100 reg_def FPR6L( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg());
101 reg_def FPR6H( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg()->next());
102 reg_def FPR7L( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg());
103 reg_def FPR7H( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg()->next());
105 // Specify priority of register selection within phases of register
106 // allocation. Highest priority is first. A useful heuristic is to
107 // give registers a low priority when they are required by machine
108 // instructions, like EAX and EDX. Registers which are used as
109 // pairs must fall on an even boundary (witness the FPR#L's in this list).
110 // For the Intel integer registers, the equivalent Long pairs are
111 // EDX:EAX, EBX:ECX, and EDI:EBP.
112 alloc_class chunk0( ECX, EBX, EBP, EDI, EAX, EDX, ESI, ESP,
113 FPR0L, FPR0H, FPR1L, FPR1H, FPR2L, FPR2H,
114 FPR3L, FPR3H, FPR4L, FPR4H, FPR5L, FPR5H,
115 FPR6L, FPR6H, FPR7L, FPR7H );
118 //----------Architecture Description Register Classes--------------------------
119 // Several register classes are automatically defined based upon information in
120 // this architecture description.
121 // 1) reg_class inline_cache_reg ( /* as def'd in frame section */ )
122 // 2) reg_class compiler_method_oop_reg ( /* as def'd in frame section */ )
123 // 2) reg_class interpreter_method_oop_reg ( /* as def'd in frame section */ )
124 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ )
125 //
126 // Class for all registers
127 reg_class any_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX, ESP);
128 // Class for general registers
129 reg_class int_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX);
130 // Class for general registers which may be used for implicit null checks on win95
131 // Also safe for use by tailjump. We don't want to allocate in rbp,
132 reg_class int_reg_no_rbp(EAX, EDX, EDI, ESI, ECX, EBX);
133 // Class of "X" registers
134 reg_class int_x_reg(EBX, ECX, EDX, EAX);
135 // Class of registers that can appear in an address with no offset.
136 // EBP and ESP require an extra instruction byte for zero offset.
137 // Used in fast-unlock
138 reg_class p_reg(EDX, EDI, ESI, EBX);
139 // Class for general registers not including ECX
140 reg_class ncx_reg(EAX, EDX, EBP, EDI, ESI, EBX);
141 // Class for general registers not including EAX
142 reg_class nax_reg(EDX, EDI, ESI, ECX, EBX);
143 // Class for general registers not including EAX or EBX.
144 reg_class nabx_reg(EDX, EDI, ESI, ECX, EBP);
145 // Class of EAX (for multiply and divide operations)
146 reg_class eax_reg(EAX);
147 // Class of EBX (for atomic add)
148 reg_class ebx_reg(EBX);
149 // Class of ECX (for shift and JCXZ operations and cmpLTMask)
150 reg_class ecx_reg(ECX);
151 // Class of EDX (for multiply and divide operations)
152 reg_class edx_reg(EDX);
153 // Class of EDI (for synchronization)
154 reg_class edi_reg(EDI);
155 // Class of ESI (for synchronization)
156 reg_class esi_reg(ESI);
157 // Singleton class for interpreter's stack pointer
158 reg_class ebp_reg(EBP);
159 // Singleton class for stack pointer
160 reg_class sp_reg(ESP);
161 // Singleton class for instruction pointer
162 // reg_class ip_reg(EIP);
163 // Class of integer register pairs
164 reg_class long_reg( EAX,EDX, ECX,EBX, EBP,EDI );
165 // Class of integer register pairs that aligns with calling convention
166 reg_class eadx_reg( EAX,EDX );
167 reg_class ebcx_reg( ECX,EBX );
168 // Not AX or DX, used in divides
169 reg_class nadx_reg( EBX,ECX,ESI,EDI,EBP );
171 // Floating point registers. Notice FPR0 is not a choice.
172 // FPR0 is not ever allocated; we use clever encodings to fake
173 // a 2-address instructions out of Intels FP stack.
174 reg_class fp_flt_reg( FPR1L,FPR2L,FPR3L,FPR4L,FPR5L,FPR6L,FPR7L );
176 reg_class fp_dbl_reg( FPR1L,FPR1H, FPR2L,FPR2H, FPR3L,FPR3H,
177 FPR4L,FPR4H, FPR5L,FPR5H, FPR6L,FPR6H,
178 FPR7L,FPR7H );
180 reg_class fp_flt_reg0( FPR1L );
181 reg_class fp_dbl_reg0( FPR1L,FPR1H );
182 reg_class fp_dbl_reg1( FPR2L,FPR2H );
183 reg_class fp_dbl_notreg0( FPR2L,FPR2H, FPR3L,FPR3H, FPR4L,FPR4H,
184 FPR5L,FPR5H, FPR6L,FPR6H, FPR7L,FPR7H );
186 %}
189 //----------SOURCE BLOCK-------------------------------------------------------
190 // This is a block of C++ code which provides values, functions, and
191 // definitions necessary in the rest of the architecture description
192 source_hpp %{
193 // Must be visible to the DFA in dfa_x86_32.cpp
194 extern bool is_operand_hi32_zero(Node* n);
195 %}
197 source %{
198 #define RELOC_IMM32 Assembler::imm_operand
199 #define RELOC_DISP32 Assembler::disp32_operand
201 #define __ _masm.
203 // How to find the high register of a Long pair, given the low register
204 #define HIGH_FROM_LOW(x) ((x)+2)
206 // These masks are used to provide 128-bit aligned bitmasks to the XMM
207 // instructions, to allow sign-masking or sign-bit flipping. They allow
208 // fast versions of NegF/NegD and AbsF/AbsD.
210 // Note: 'double' and 'long long' have 32-bits alignment on x86.
211 static jlong* double_quadword(jlong *adr, jlong lo, jlong hi) {
212 // Use the expression (adr)&(~0xF) to provide 128-bits aligned address
213 // of 128-bits operands for SSE instructions.
214 jlong *operand = (jlong*)(((uintptr_t)adr)&((uintptr_t)(~0xF)));
215 // Store the value to a 128-bits operand.
216 operand[0] = lo;
217 operand[1] = hi;
218 return operand;
219 }
221 // Buffer for 128-bits masks used by SSE instructions.
222 static jlong fp_signmask_pool[(4+1)*2]; // 4*128bits(data) + 128bits(alignment)
224 // Static initialization during VM startup.
225 static jlong *float_signmask_pool = double_quadword(&fp_signmask_pool[1*2], CONST64(0x7FFFFFFF7FFFFFFF), CONST64(0x7FFFFFFF7FFFFFFF));
226 static jlong *double_signmask_pool = double_quadword(&fp_signmask_pool[2*2], CONST64(0x7FFFFFFFFFFFFFFF), CONST64(0x7FFFFFFFFFFFFFFF));
227 static jlong *float_signflip_pool = double_quadword(&fp_signmask_pool[3*2], CONST64(0x8000000080000000), CONST64(0x8000000080000000));
228 static jlong *double_signflip_pool = double_quadword(&fp_signmask_pool[4*2], CONST64(0x8000000000000000), CONST64(0x8000000000000000));
230 // Offset hacking within calls.
231 static int pre_call_resets_size() {
232 int size = 0;
233 Compile* C = Compile::current();
234 if (C->in_24_bit_fp_mode()) {
235 size += 6; // fldcw
236 }
237 if (C->max_vector_size() > 16) {
238 size += 3; // vzeroupper
239 }
240 return size;
241 }
243 static int preserve_SP_size() {
244 return 2; // op, rm(reg/reg)
245 }
247 // !!!!! Special hack to get all type of calls to specify the byte offset
248 // from the start of the call to the point where the return address
249 // will point.
250 int MachCallStaticJavaNode::ret_addr_offset() {
251 int offset = 5 + pre_call_resets_size(); // 5 bytes from start of call to where return address points
252 if (_method_handle_invoke)
253 offset += preserve_SP_size();
254 return offset;
255 }
257 int MachCallDynamicJavaNode::ret_addr_offset() {
258 return 10 + pre_call_resets_size(); // 10 bytes from start of call to where return address points
259 }
261 static int sizeof_FFree_Float_Stack_All = -1;
263 int MachCallRuntimeNode::ret_addr_offset() {
264 assert(sizeof_FFree_Float_Stack_All != -1, "must have been emitted already");
265 return sizeof_FFree_Float_Stack_All + 5 + pre_call_resets_size();
266 }
268 // Indicate if the safepoint node needs the polling page as an input.
269 // Since x86 does have absolute addressing, it doesn't.
270 bool SafePointNode::needs_polling_address_input() {
271 return false;
272 }
274 //
275 // Compute padding required for nodes which need alignment
276 //
278 // The address of the call instruction needs to be 4-byte aligned to
279 // ensure that it does not span a cache line so that it can be patched.
280 int CallStaticJavaDirectNode::compute_padding(int current_offset) const {
281 current_offset += pre_call_resets_size(); // skip fldcw, if any
282 current_offset += 1; // skip call opcode byte
283 return round_to(current_offset, alignment_required()) - current_offset;
284 }
286 // The address of the call instruction needs to be 4-byte aligned to
287 // ensure that it does not span a cache line so that it can be patched.
288 int CallStaticJavaHandleNode::compute_padding(int current_offset) const {
289 current_offset += pre_call_resets_size(); // skip fldcw, if any
290 current_offset += preserve_SP_size(); // skip mov rbp, rsp
291 current_offset += 1; // skip call opcode byte
292 return round_to(current_offset, alignment_required()) - current_offset;
293 }
295 // The address of the call instruction needs to be 4-byte aligned to
296 // ensure that it does not span a cache line so that it can be patched.
297 int CallDynamicJavaDirectNode::compute_padding(int current_offset) const {
298 current_offset += pre_call_resets_size(); // skip fldcw, if any
299 current_offset += 5; // skip MOV instruction
300 current_offset += 1; // skip call opcode byte
301 return round_to(current_offset, alignment_required()) - current_offset;
302 }
304 // EMIT_RM()
305 void emit_rm(CodeBuffer &cbuf, int f1, int f2, int f3) {
306 unsigned char c = (unsigned char)((f1 << 6) | (f2 << 3) | f3);
307 cbuf.insts()->emit_int8(c);
308 }
310 // EMIT_CC()
311 void emit_cc(CodeBuffer &cbuf, int f1, int f2) {
312 unsigned char c = (unsigned char)( f1 | f2 );
313 cbuf.insts()->emit_int8(c);
314 }
316 // EMIT_OPCODE()
317 void emit_opcode(CodeBuffer &cbuf, int code) {
318 cbuf.insts()->emit_int8((unsigned char) code);
319 }
321 // EMIT_OPCODE() w/ relocation information
322 void emit_opcode(CodeBuffer &cbuf, int code, relocInfo::relocType reloc, int offset = 0) {
323 cbuf.relocate(cbuf.insts_mark() + offset, reloc);
324 emit_opcode(cbuf, code);
325 }
327 // EMIT_D8()
328 void emit_d8(CodeBuffer &cbuf, int d8) {
329 cbuf.insts()->emit_int8((unsigned char) d8);
330 }
332 // EMIT_D16()
333 void emit_d16(CodeBuffer &cbuf, int d16) {
334 cbuf.insts()->emit_int16(d16);
335 }
337 // EMIT_D32()
338 void emit_d32(CodeBuffer &cbuf, int d32) {
339 cbuf.insts()->emit_int32(d32);
340 }
342 // emit 32 bit value and construct relocation entry from relocInfo::relocType
343 void emit_d32_reloc(CodeBuffer &cbuf, int d32, relocInfo::relocType reloc,
344 int format) {
345 cbuf.relocate(cbuf.insts_mark(), reloc, format);
346 cbuf.insts()->emit_int32(d32);
347 }
349 // emit 32 bit value and construct relocation entry from RelocationHolder
350 void emit_d32_reloc(CodeBuffer &cbuf, int d32, RelocationHolder const& rspec,
351 int format) {
352 #ifdef ASSERT
353 if (rspec.reloc()->type() == relocInfo::oop_type && d32 != 0 && d32 != (int)Universe::non_oop_word()) {
354 assert(oop(d32)->is_oop() && (ScavengeRootsInCode || !oop(d32)->is_scavengable()), "cannot embed scavengable oops in code");
355 }
356 #endif
357 cbuf.relocate(cbuf.insts_mark(), rspec, format);
358 cbuf.insts()->emit_int32(d32);
359 }
361 // Access stack slot for load or store
362 void store_to_stackslot(CodeBuffer &cbuf, int opcode, int rm_field, int disp) {
363 emit_opcode( cbuf, opcode ); // (e.g., FILD [ESP+src])
364 if( -128 <= disp && disp <= 127 ) {
365 emit_rm( cbuf, 0x01, rm_field, ESP_enc ); // R/M byte
366 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
367 emit_d8 (cbuf, disp); // Displacement // R/M byte
368 } else {
369 emit_rm( cbuf, 0x02, rm_field, ESP_enc ); // R/M byte
370 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
371 emit_d32(cbuf, disp); // Displacement // R/M byte
372 }
373 }
375 // rRegI ereg, memory mem) %{ // emit_reg_mem
376 void encode_RegMem( CodeBuffer &cbuf, int reg_encoding, int base, int index, int scale, int displace, relocInfo::relocType disp_reloc ) {
377 // There is no index & no scale, use form without SIB byte
378 if ((index == 0x4) &&
379 (scale == 0) && (base != ESP_enc)) {
380 // If no displacement, mode is 0x0; unless base is [EBP]
381 if ( (displace == 0) && (base != EBP_enc) ) {
382 emit_rm(cbuf, 0x0, reg_encoding, base);
383 }
384 else { // If 8-bit displacement, mode 0x1
385 if ((displace >= -128) && (displace <= 127)
386 && (disp_reloc == relocInfo::none) ) {
387 emit_rm(cbuf, 0x1, reg_encoding, base);
388 emit_d8(cbuf, displace);
389 }
390 else { // If 32-bit displacement
391 if (base == -1) { // Special flag for absolute address
392 emit_rm(cbuf, 0x0, reg_encoding, 0x5);
393 // (manual lies; no SIB needed here)
394 if ( disp_reloc != relocInfo::none ) {
395 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
396 } else {
397 emit_d32 (cbuf, displace);
398 }
399 }
400 else { // Normal base + offset
401 emit_rm(cbuf, 0x2, reg_encoding, base);
402 if ( disp_reloc != relocInfo::none ) {
403 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
404 } else {
405 emit_d32 (cbuf, displace);
406 }
407 }
408 }
409 }
410 }
411 else { // Else, encode with the SIB byte
412 // If no displacement, mode is 0x0; unless base is [EBP]
413 if (displace == 0 && (base != EBP_enc)) { // If no displacement
414 emit_rm(cbuf, 0x0, reg_encoding, 0x4);
415 emit_rm(cbuf, scale, index, base);
416 }
417 else { // If 8-bit displacement, mode 0x1
418 if ((displace >= -128) && (displace <= 127)
419 && (disp_reloc == relocInfo::none) ) {
420 emit_rm(cbuf, 0x1, reg_encoding, 0x4);
421 emit_rm(cbuf, scale, index, base);
422 emit_d8(cbuf, displace);
423 }
424 else { // If 32-bit displacement
425 if (base == 0x04 ) {
426 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
427 emit_rm(cbuf, scale, index, 0x04);
428 } else {
429 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
430 emit_rm(cbuf, scale, index, base);
431 }
432 if ( disp_reloc != relocInfo::none ) {
433 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
434 } else {
435 emit_d32 (cbuf, displace);
436 }
437 }
438 }
439 }
440 }
443 void encode_Copy( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
444 if( dst_encoding == src_encoding ) {
445 // reg-reg copy, use an empty encoding
446 } else {
447 emit_opcode( cbuf, 0x8B );
448 emit_rm(cbuf, 0x3, dst_encoding, src_encoding );
449 }
450 }
452 void emit_cmpfp_fixup(MacroAssembler& _masm) {
453 Label exit;
454 __ jccb(Assembler::noParity, exit);
455 __ pushf();
456 //
457 // comiss/ucomiss instructions set ZF,PF,CF flags and
458 // zero OF,AF,SF for NaN values.
459 // Fixup flags by zeroing ZF,PF so that compare of NaN
460 // values returns 'less than' result (CF is set).
461 // Leave the rest of flags unchanged.
462 //
463 // 7 6 5 4 3 2 1 0
464 // |S|Z|r|A|r|P|r|C| (r - reserved bit)
465 // 0 0 1 0 1 0 1 1 (0x2B)
466 //
467 __ andl(Address(rsp, 0), 0xffffff2b);
468 __ popf();
469 __ bind(exit);
470 }
472 void emit_cmpfp3(MacroAssembler& _masm, Register dst) {
473 Label done;
474 __ movl(dst, -1);
475 __ jcc(Assembler::parity, done);
476 __ jcc(Assembler::below, done);
477 __ setb(Assembler::notEqual, dst);
478 __ movzbl(dst, dst);
479 __ bind(done);
480 }
483 //=============================================================================
484 const RegMask& MachConstantBaseNode::_out_RegMask = RegMask::Empty;
486 int Compile::ConstantTable::calculate_table_base_offset() const {
487 return 0; // absolute addressing, no offset
488 }
490 void MachConstantBaseNode::emit(CodeBuffer& cbuf, PhaseRegAlloc* ra_) const {
491 // Empty encoding
492 }
494 uint MachConstantBaseNode::size(PhaseRegAlloc* ra_) const {
495 return 0;
496 }
498 #ifndef PRODUCT
499 void MachConstantBaseNode::format(PhaseRegAlloc* ra_, outputStream* st) const {
500 st->print("# MachConstantBaseNode (empty encoding)");
501 }
502 #endif
505 //=============================================================================
506 #ifndef PRODUCT
507 void MachPrologNode::format(PhaseRegAlloc* ra_, outputStream* st) const {
508 Compile* C = ra_->C;
510 int framesize = C->frame_slots() << LogBytesPerInt;
511 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
512 // Remove wordSize for return addr which is already pushed.
513 framesize -= wordSize;
515 if (C->need_stack_bang(framesize)) {
516 framesize -= wordSize;
517 st->print("# stack bang");
518 st->print("\n\t");
519 st->print("PUSH EBP\t# Save EBP");
520 if (framesize) {
521 st->print("\n\t");
522 st->print("SUB ESP, #%d\t# Create frame",framesize);
523 }
524 } else {
525 st->print("SUB ESP, #%d\t# Create frame",framesize);
526 st->print("\n\t");
527 framesize -= wordSize;
528 st->print("MOV [ESP + #%d], EBP\t# Save EBP",framesize);
529 }
531 if (VerifyStackAtCalls) {
532 st->print("\n\t");
533 framesize -= wordSize;
534 st->print("MOV [ESP + #%d], 0xBADB100D\t# Majik cookie for stack depth check",framesize);
535 }
537 if( C->in_24_bit_fp_mode() ) {
538 st->print("\n\t");
539 st->print("FLDCW \t# load 24 bit fpu control word");
540 }
541 if (UseSSE >= 2 && VerifyFPU) {
542 st->print("\n\t");
543 st->print("# verify FPU stack (must be clean on entry)");
544 }
546 #ifdef ASSERT
547 if (VerifyStackAtCalls) {
548 st->print("\n\t");
549 st->print("# stack alignment check");
550 }
551 #endif
552 st->cr();
553 }
554 #endif
557 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
558 Compile* C = ra_->C;
559 MacroAssembler _masm(&cbuf);
561 int framesize = C->frame_slots() << LogBytesPerInt;
563 __ verified_entry(framesize, C->need_stack_bang(framesize), C->in_24_bit_fp_mode());
565 C->set_frame_complete(cbuf.insts_size());
567 if (C->has_mach_constant_base_node()) {
568 // NOTE: We set the table base offset here because users might be
569 // emitted before MachConstantBaseNode.
570 Compile::ConstantTable& constant_table = C->constant_table();
571 constant_table.set_table_base_offset(constant_table.calculate_table_base_offset());
572 }
573 }
575 uint MachPrologNode::size(PhaseRegAlloc *ra_) const {
576 return MachNode::size(ra_); // too many variables; just compute it the hard way
577 }
579 int MachPrologNode::reloc() const {
580 return 0; // a large enough number
581 }
583 //=============================================================================
584 #ifndef PRODUCT
585 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
586 Compile *C = ra_->C;
587 int framesize = C->frame_slots() << LogBytesPerInt;
588 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
589 // Remove two words for return addr and rbp,
590 framesize -= 2*wordSize;
592 if (C->max_vector_size() > 16) {
593 st->print("VZEROUPPER");
594 st->cr(); st->print("\t");
595 }
596 if (C->in_24_bit_fp_mode()) {
597 st->print("FLDCW standard control word");
598 st->cr(); st->print("\t");
599 }
600 if (framesize) {
601 st->print("ADD ESP,%d\t# Destroy frame",framesize);
602 st->cr(); st->print("\t");
603 }
604 st->print_cr("POPL EBP"); st->print("\t");
605 if (do_polling() && C->is_method_compilation()) {
606 st->print("TEST PollPage,EAX\t! Poll Safepoint");
607 st->cr(); st->print("\t");
608 }
609 }
610 #endif
612 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
613 Compile *C = ra_->C;
615 if (C->max_vector_size() > 16) {
616 // Clear upper bits of YMM registers when current compiled code uses
617 // wide vectors to avoid AVX <-> SSE transition penalty during call.
618 MacroAssembler masm(&cbuf);
619 masm.vzeroupper();
620 }
621 // If method set FPU control word, restore to standard control word
622 if (C->in_24_bit_fp_mode()) {
623 MacroAssembler masm(&cbuf);
624 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
625 }
627 int framesize = C->frame_slots() << LogBytesPerInt;
628 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
629 // Remove two words for return addr and rbp,
630 framesize -= 2*wordSize;
632 // Note that VerifyStackAtCalls' Majik cookie does not change the frame size popped here
634 if (framesize >= 128) {
635 emit_opcode(cbuf, 0x81); // add SP, #framesize
636 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
637 emit_d32(cbuf, framesize);
638 } else if (framesize) {
639 emit_opcode(cbuf, 0x83); // add SP, #framesize
640 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
641 emit_d8(cbuf, framesize);
642 }
644 emit_opcode(cbuf, 0x58 | EBP_enc);
646 if (do_polling() && C->is_method_compilation()) {
647 cbuf.relocate(cbuf.insts_end(), relocInfo::poll_return_type, 0);
648 emit_opcode(cbuf,0x85);
649 emit_rm(cbuf, 0x0, EAX_enc, 0x5); // EAX
650 emit_d32(cbuf, (intptr_t)os::get_polling_page());
651 }
652 }
654 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const {
655 Compile *C = ra_->C;
656 // If method set FPU control word, restore to standard control word
657 int size = C->in_24_bit_fp_mode() ? 6 : 0;
658 if (C->max_vector_size() > 16) size += 3; // vzeroupper
659 if (do_polling() && C->is_method_compilation()) size += 6;
661 int framesize = C->frame_slots() << LogBytesPerInt;
662 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
663 // Remove two words for return addr and rbp,
664 framesize -= 2*wordSize;
666 size++; // popl rbp,
668 if (framesize >= 128) {
669 size += 6;
670 } else {
671 size += framesize ? 3 : 0;
672 }
673 return size;
674 }
676 int MachEpilogNode::reloc() const {
677 return 0; // a large enough number
678 }
680 const Pipeline * MachEpilogNode::pipeline() const {
681 return MachNode::pipeline_class();
682 }
684 int MachEpilogNode::safepoint_offset() const { return 0; }
686 //=============================================================================
688 enum RC { rc_bad, rc_int, rc_float, rc_xmm, rc_stack };
689 static enum RC rc_class( OptoReg::Name reg ) {
691 if( !OptoReg::is_valid(reg) ) return rc_bad;
692 if (OptoReg::is_stack(reg)) return rc_stack;
694 VMReg r = OptoReg::as_VMReg(reg);
695 if (r->is_Register()) return rc_int;
696 if (r->is_FloatRegister()) {
697 assert(UseSSE < 2, "shouldn't be used in SSE2+ mode");
698 return rc_float;
699 }
700 assert(r->is_XMMRegister(), "must be");
701 return rc_xmm;
702 }
704 static int impl_helper( CodeBuffer *cbuf, bool do_size, bool is_load, int offset, int reg,
705 int opcode, const char *op_str, int size, outputStream* st ) {
706 if( cbuf ) {
707 emit_opcode (*cbuf, opcode );
708 encode_RegMem(*cbuf, Matcher::_regEncode[reg], ESP_enc, 0x4, 0, offset, relocInfo::none);
709 #ifndef PRODUCT
710 } else if( !do_size ) {
711 if( size != 0 ) st->print("\n\t");
712 if( opcode == 0x8B || opcode == 0x89 ) { // MOV
713 if( is_load ) st->print("%s %s,[ESP + #%d]",op_str,Matcher::regName[reg],offset);
714 else st->print("%s [ESP + #%d],%s",op_str,offset,Matcher::regName[reg]);
715 } else { // FLD, FST, PUSH, POP
716 st->print("%s [ESP + #%d]",op_str,offset);
717 }
718 #endif
719 }
720 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
721 return size+3+offset_size;
722 }
724 // Helper for XMM registers. Extra opcode bits, limited syntax.
725 static int impl_x_helper( CodeBuffer *cbuf, bool do_size, bool is_load,
726 int offset, int reg_lo, int reg_hi, int size, outputStream* st ) {
727 if (cbuf) {
728 MacroAssembler _masm(cbuf);
729 if (reg_lo+1 == reg_hi) { // double move?
730 if (is_load) {
731 __ movdbl(as_XMMRegister(Matcher::_regEncode[reg_lo]), Address(rsp, offset));
732 } else {
733 __ movdbl(Address(rsp, offset), as_XMMRegister(Matcher::_regEncode[reg_lo]));
734 }
735 } else {
736 if (is_load) {
737 __ movflt(as_XMMRegister(Matcher::_regEncode[reg_lo]), Address(rsp, offset));
738 } else {
739 __ movflt(Address(rsp, offset), as_XMMRegister(Matcher::_regEncode[reg_lo]));
740 }
741 }
742 #ifndef PRODUCT
743 } else if (!do_size) {
744 if (size != 0) st->print("\n\t");
745 if (reg_lo+1 == reg_hi) { // double move?
746 if (is_load) st->print("%s %s,[ESP + #%d]",
747 UseXmmLoadAndClearUpper ? "MOVSD " : "MOVLPD",
748 Matcher::regName[reg_lo], offset);
749 else st->print("MOVSD [ESP + #%d],%s",
750 offset, Matcher::regName[reg_lo]);
751 } else {
752 if (is_load) st->print("MOVSS %s,[ESP + #%d]",
753 Matcher::regName[reg_lo], offset);
754 else st->print("MOVSS [ESP + #%d],%s",
755 offset, Matcher::regName[reg_lo]);
756 }
757 #endif
758 }
759 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
760 // VEX_2bytes prefix is used if UseAVX > 0, so it takes the same 2 bytes as SIMD prefix.
761 return size+5+offset_size;
762 }
765 static int impl_movx_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
766 int src_hi, int dst_hi, int size, outputStream* st ) {
767 if (cbuf) {
768 MacroAssembler _masm(cbuf);
769 if (src_lo+1 == src_hi && dst_lo+1 == dst_hi) { // double move?
770 __ movdbl(as_XMMRegister(Matcher::_regEncode[dst_lo]),
771 as_XMMRegister(Matcher::_regEncode[src_lo]));
772 } else {
773 __ movflt(as_XMMRegister(Matcher::_regEncode[dst_lo]),
774 as_XMMRegister(Matcher::_regEncode[src_lo]));
775 }
776 #ifndef PRODUCT
777 } else if (!do_size) {
778 if (size != 0) st->print("\n\t");
779 if (UseXmmRegToRegMoveAll) {//Use movaps,movapd to move between xmm registers
780 if (src_lo+1 == src_hi && dst_lo+1 == dst_hi) { // double move?
781 st->print("MOVAPD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
782 } else {
783 st->print("MOVAPS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
784 }
785 } else {
786 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
787 st->print("MOVSD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
788 } else {
789 st->print("MOVSS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
790 }
791 }
792 #endif
793 }
794 // VEX_2bytes prefix is used if UseAVX > 0, and it takes the same 2 bytes as SIMD prefix.
795 // Only MOVAPS SSE prefix uses 1 byte.
796 int sz = 4;
797 if (!(src_lo+1 == src_hi && dst_lo+1 == dst_hi) &&
798 UseXmmRegToRegMoveAll && (UseAVX == 0)) sz = 3;
799 return size + sz;
800 }
802 static int impl_movgpr2x_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
803 int src_hi, int dst_hi, int size, outputStream* st ) {
804 // 32-bit
805 if (cbuf) {
806 MacroAssembler _masm(cbuf);
807 __ movdl(as_XMMRegister(Matcher::_regEncode[dst_lo]),
808 as_Register(Matcher::_regEncode[src_lo]));
809 #ifndef PRODUCT
810 } else if (!do_size) {
811 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
812 #endif
813 }
814 return 4;
815 }
818 static int impl_movx2gpr_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
819 int src_hi, int dst_hi, int size, outputStream* st ) {
820 // 32-bit
821 if (cbuf) {
822 MacroAssembler _masm(cbuf);
823 __ movdl(as_Register(Matcher::_regEncode[dst_lo]),
824 as_XMMRegister(Matcher::_regEncode[src_lo]));
825 #ifndef PRODUCT
826 } else if (!do_size) {
827 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
828 #endif
829 }
830 return 4;
831 }
833 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int size, outputStream* st ) {
834 if( cbuf ) {
835 emit_opcode(*cbuf, 0x8B );
836 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst], Matcher::_regEncode[src] );
837 #ifndef PRODUCT
838 } else if( !do_size ) {
839 if( size != 0 ) st->print("\n\t");
840 st->print("MOV %s,%s",Matcher::regName[dst],Matcher::regName[src]);
841 #endif
842 }
843 return size+2;
844 }
846 static int impl_fp_store_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int src_hi, int dst_lo, int dst_hi,
847 int offset, int size, outputStream* st ) {
848 if( src_lo != FPR1L_num ) { // Move value to top of FP stack, if not already there
849 if( cbuf ) {
850 emit_opcode( *cbuf, 0xD9 ); // FLD (i.e., push it)
851 emit_d8( *cbuf, 0xC0-1+Matcher::_regEncode[src_lo] );
852 #ifndef PRODUCT
853 } else if( !do_size ) {
854 if( size != 0 ) st->print("\n\t");
855 st->print("FLD %s",Matcher::regName[src_lo]);
856 #endif
857 }
858 size += 2;
859 }
861 int st_op = (src_lo != FPR1L_num) ? EBX_num /*store & pop*/ : EDX_num /*store no pop*/;
862 const char *op_str;
863 int op;
864 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double store?
865 op_str = (src_lo != FPR1L_num) ? "FSTP_D" : "FST_D ";
866 op = 0xDD;
867 } else { // 32-bit store
868 op_str = (src_lo != FPR1L_num) ? "FSTP_S" : "FST_S ";
869 op = 0xD9;
870 assert( !OptoReg::is_valid(src_hi) && !OptoReg::is_valid(dst_hi), "no non-adjacent float-stores" );
871 }
873 return impl_helper(cbuf,do_size,false,offset,st_op,op,op_str,size, st);
874 }
876 // Next two methods are shared by 32- and 64-bit VM. They are defined in x86.ad.
877 static int vec_mov_helper(CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
878 int src_hi, int dst_hi, uint ireg, outputStream* st);
880 static int vec_spill_helper(CodeBuffer *cbuf, bool do_size, bool is_load,
881 int stack_offset, int reg, uint ireg, outputStream* st);
883 static int vec_stack_to_stack_helper(CodeBuffer *cbuf, bool do_size, int src_offset,
884 int dst_offset, uint ireg, outputStream* st) {
885 int calc_size = 0;
886 int src_offset_size = (src_offset == 0) ? 0 : ((src_offset < 0x80) ? 1 : 4);
887 int dst_offset_size = (dst_offset == 0) ? 0 : ((dst_offset < 0x80) ? 1 : 4);
888 switch (ireg) {
889 case Op_VecS:
890 calc_size = 3+src_offset_size + 3+dst_offset_size;
891 break;
892 case Op_VecD:
893 calc_size = 3+src_offset_size + 3+dst_offset_size;
894 src_offset += 4;
895 dst_offset += 4;
896 src_offset_size = (src_offset == 0) ? 0 : ((src_offset < 0x80) ? 1 : 4);
897 dst_offset_size = (dst_offset == 0) ? 0 : ((dst_offset < 0x80) ? 1 : 4);
898 calc_size += 3+src_offset_size + 3+dst_offset_size;
899 break;
900 case Op_VecX:
901 calc_size = 6 + 6 + 5+src_offset_size + 5+dst_offset_size;
902 break;
903 case Op_VecY:
904 calc_size = 6 + 6 + 5+src_offset_size + 5+dst_offset_size;
905 break;
906 default:
907 ShouldNotReachHere();
908 }
909 if (cbuf) {
910 MacroAssembler _masm(cbuf);
911 int offset = __ offset();
912 switch (ireg) {
913 case Op_VecS:
914 __ pushl(Address(rsp, src_offset));
915 __ popl (Address(rsp, dst_offset));
916 break;
917 case Op_VecD:
918 __ pushl(Address(rsp, src_offset));
919 __ popl (Address(rsp, dst_offset));
920 __ pushl(Address(rsp, src_offset+4));
921 __ popl (Address(rsp, dst_offset+4));
922 break;
923 case Op_VecX:
924 __ movdqu(Address(rsp, -16), xmm0);
925 __ movdqu(xmm0, Address(rsp, src_offset));
926 __ movdqu(Address(rsp, dst_offset), xmm0);
927 __ movdqu(xmm0, Address(rsp, -16));
928 break;
929 case Op_VecY:
930 __ vmovdqu(Address(rsp, -32), xmm0);
931 __ vmovdqu(xmm0, Address(rsp, src_offset));
932 __ vmovdqu(Address(rsp, dst_offset), xmm0);
933 __ vmovdqu(xmm0, Address(rsp, -32));
934 break;
935 default:
936 ShouldNotReachHere();
937 }
938 int size = __ offset() - offset;
939 assert(size == calc_size, "incorrect size calculattion");
940 return size;
941 #ifndef PRODUCT
942 } else if (!do_size) {
943 switch (ireg) {
944 case Op_VecS:
945 st->print("pushl [rsp + #%d]\t# 32-bit mem-mem spill\n\t"
946 "popl [rsp + #%d]",
947 src_offset, dst_offset);
948 break;
949 case Op_VecD:
950 st->print("pushl [rsp + #%d]\t# 64-bit mem-mem spill\n\t"
951 "popq [rsp + #%d]\n\t"
952 "pushl [rsp + #%d]\n\t"
953 "popq [rsp + #%d]",
954 src_offset, dst_offset, src_offset+4, dst_offset+4);
955 break;
956 case Op_VecX:
957 st->print("movdqu [rsp - #16], xmm0\t# 128-bit mem-mem spill\n\t"
958 "movdqu xmm0, [rsp + #%d]\n\t"
959 "movdqu [rsp + #%d], xmm0\n\t"
960 "movdqu xmm0, [rsp - #16]",
961 src_offset, dst_offset);
962 break;
963 case Op_VecY:
964 st->print("vmovdqu [rsp - #32], xmm0\t# 256-bit mem-mem spill\n\t"
965 "vmovdqu xmm0, [rsp + #%d]\n\t"
966 "vmovdqu [rsp + #%d], xmm0\n\t"
967 "vmovdqu xmm0, [rsp - #32]",
968 src_offset, dst_offset);
969 break;
970 default:
971 ShouldNotReachHere();
972 }
973 #endif
974 }
975 return calc_size;
976 }
978 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, outputStream* st ) const {
979 // Get registers to move
980 OptoReg::Name src_second = ra_->get_reg_second(in(1));
981 OptoReg::Name src_first = ra_->get_reg_first(in(1));
982 OptoReg::Name dst_second = ra_->get_reg_second(this );
983 OptoReg::Name dst_first = ra_->get_reg_first(this );
985 enum RC src_second_rc = rc_class(src_second);
986 enum RC src_first_rc = rc_class(src_first);
987 enum RC dst_second_rc = rc_class(dst_second);
988 enum RC dst_first_rc = rc_class(dst_first);
990 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" );
992 // Generate spill code!
993 int size = 0;
995 if( src_first == dst_first && src_second == dst_second )
996 return size; // Self copy, no move
998 if (bottom_type()->isa_vect() != NULL) {
999 uint ireg = ideal_reg();
1000 assert((src_first_rc != rc_int && dst_first_rc != rc_int), "sanity");
1001 assert((src_first_rc != rc_float && dst_first_rc != rc_float), "sanity");
1002 assert((ireg == Op_VecS || ireg == Op_VecD || ireg == Op_VecX || ireg == Op_VecY), "sanity");
1003 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
1004 // mem -> mem
1005 int src_offset = ra_->reg2offset(src_first);
1006 int dst_offset = ra_->reg2offset(dst_first);
1007 return vec_stack_to_stack_helper(cbuf, do_size, src_offset, dst_offset, ireg, st);
1008 } else if (src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1009 return vec_mov_helper(cbuf, do_size, src_first, dst_first, src_second, dst_second, ireg, st);
1010 } else if (src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1011 int stack_offset = ra_->reg2offset(dst_first);
1012 return vec_spill_helper(cbuf, do_size, false, stack_offset, src_first, ireg, st);
1013 } else if (src_first_rc == rc_stack && dst_first_rc == rc_xmm ) {
1014 int stack_offset = ra_->reg2offset(src_first);
1015 return vec_spill_helper(cbuf, do_size, true, stack_offset, dst_first, ireg, st);
1016 } else {
1017 ShouldNotReachHere();
1018 }
1019 }
1021 // --------------------------------------
1022 // Check for mem-mem move. push/pop to move.
1023 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
1024 if( src_second == dst_first ) { // overlapping stack copy ranges
1025 assert( src_second_rc == rc_stack && dst_second_rc == rc_stack, "we only expect a stk-stk copy here" );
1026 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
1027 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
1028 src_second_rc = dst_second_rc = rc_bad; // flag as already moved the second bits
1029 }
1030 // move low bits
1031 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),ESI_num,0xFF,"PUSH ",size, st);
1032 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),EAX_num,0x8F,"POP ",size, st);
1033 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { // mov second bits
1034 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
1035 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
1036 }
1037 return size;
1038 }
1040 // --------------------------------------
1041 // Check for integer reg-reg copy
1042 if( src_first_rc == rc_int && dst_first_rc == rc_int )
1043 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,size, st);
1045 // Check for integer store
1046 if( src_first_rc == rc_int && dst_first_rc == rc_stack )
1047 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first,0x89,"MOV ",size, st);
1049 // Check for integer load
1050 if( dst_first_rc == rc_int && src_first_rc == rc_stack )
1051 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first,0x8B,"MOV ",size, st);
1053 // Check for integer reg-xmm reg copy
1054 if( src_first_rc == rc_int && dst_first_rc == rc_xmm ) {
1055 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1056 "no 64 bit integer-float reg moves" );
1057 return impl_movgpr2x_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1058 }
1059 // --------------------------------------
1060 // Check for float reg-reg copy
1061 if( src_first_rc == rc_float && dst_first_rc == rc_float ) {
1062 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1063 (src_first+1 == src_second && dst_first+1 == dst_second), "no non-adjacent float-moves" );
1064 if( cbuf ) {
1066 // Note the mucking with the register encode to compensate for the 0/1
1067 // indexing issue mentioned in a comment in the reg_def sections
1068 // for FPR registers many lines above here.
1070 if( src_first != FPR1L_num ) {
1071 emit_opcode (*cbuf, 0xD9 ); // FLD ST(i)
1072 emit_d8 (*cbuf, 0xC0+Matcher::_regEncode[src_first]-1 );
1073 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1074 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1075 } else {
1076 emit_opcode (*cbuf, 0xDD ); // FST ST(i)
1077 emit_d8 (*cbuf, 0xD0+Matcher::_regEncode[dst_first]-1 );
1078 }
1079 #ifndef PRODUCT
1080 } else if( !do_size ) {
1081 if( size != 0 ) st->print("\n\t");
1082 if( src_first != FPR1L_num ) st->print("FLD %s\n\tFSTP %s",Matcher::regName[src_first],Matcher::regName[dst_first]);
1083 else st->print( "FST %s", Matcher::regName[dst_first]);
1084 #endif
1085 }
1086 return size + ((src_first != FPR1L_num) ? 2+2 : 2);
1087 }
1089 // Check for float store
1090 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) {
1091 return impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,ra_->reg2offset(dst_first),size, st);
1092 }
1094 // Check for float load
1095 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) {
1096 int offset = ra_->reg2offset(src_first);
1097 const char *op_str;
1098 int op;
1099 if( src_first+1 == src_second && dst_first+1 == dst_second ) { // double load?
1100 op_str = "FLD_D";
1101 op = 0xDD;
1102 } else { // 32-bit load
1103 op_str = "FLD_S";
1104 op = 0xD9;
1105 assert( src_second_rc == rc_bad && dst_second_rc == rc_bad, "no non-adjacent float-loads" );
1106 }
1107 if( cbuf ) {
1108 emit_opcode (*cbuf, op );
1109 encode_RegMem(*cbuf, 0x0, ESP_enc, 0x4, 0, offset, relocInfo::none);
1110 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1111 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1112 #ifndef PRODUCT
1113 } else if( !do_size ) {
1114 if( size != 0 ) st->print("\n\t");
1115 st->print("%s ST,[ESP + #%d]\n\tFSTP %s",op_str, offset,Matcher::regName[dst_first]);
1116 #endif
1117 }
1118 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
1119 return size + 3+offset_size+2;
1120 }
1122 // Check for xmm reg-reg copy
1123 if( src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1124 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1125 (src_first+1 == src_second && dst_first+1 == dst_second),
1126 "no non-adjacent float-moves" );
1127 return impl_movx_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1128 }
1130 // Check for xmm reg-integer reg copy
1131 if( src_first_rc == rc_xmm && dst_first_rc == rc_int ) {
1132 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1133 "no 64 bit float-integer reg moves" );
1134 return impl_movx2gpr_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1135 }
1137 // Check for xmm store
1138 if( src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1139 return impl_x_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first, src_second, size, st);
1140 }
1142 // Check for float xmm load
1143 if( dst_first_rc == rc_xmm && src_first_rc == rc_stack ) {
1144 return impl_x_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first, dst_second, size, st);
1145 }
1147 // Copy from float reg to xmm reg
1148 if( dst_first_rc == rc_xmm && src_first_rc == rc_float ) {
1149 // copy to the top of stack from floating point reg
1150 // and use LEA to preserve flags
1151 if( cbuf ) {
1152 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP-8]
1153 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1154 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1155 emit_d8(*cbuf,0xF8);
1156 #ifndef PRODUCT
1157 } else if( !do_size ) {
1158 if( size != 0 ) st->print("\n\t");
1159 st->print("LEA ESP,[ESP-8]");
1160 #endif
1161 }
1162 size += 4;
1164 size = impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,0,size, st);
1166 // Copy from the temp memory to the xmm reg.
1167 size = impl_x_helper(cbuf,do_size,true ,0,dst_first, dst_second, size, st);
1169 if( cbuf ) {
1170 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP+8]
1171 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1172 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1173 emit_d8(*cbuf,0x08);
1174 #ifndef PRODUCT
1175 } else if( !do_size ) {
1176 if( size != 0 ) st->print("\n\t");
1177 st->print("LEA ESP,[ESP+8]");
1178 #endif
1179 }
1180 size += 4;
1181 return size;
1182 }
1184 assert( size > 0, "missed a case" );
1186 // --------------------------------------------------------------------
1187 // Check for second bits still needing moving.
1188 if( src_second == dst_second )
1189 return size; // Self copy; no move
1190 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" );
1192 // Check for second word int-int move
1193 if( src_second_rc == rc_int && dst_second_rc == rc_int )
1194 return impl_mov_helper(cbuf,do_size,src_second,dst_second,size, st);
1196 // Check for second word integer store
1197 if( src_second_rc == rc_int && dst_second_rc == rc_stack )
1198 return impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),src_second,0x89,"MOV ",size, st);
1200 // Check for second word integer load
1201 if( dst_second_rc == rc_int && src_second_rc == rc_stack )
1202 return impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),dst_second,0x8B,"MOV ",size, st);
1205 Unimplemented();
1206 }
1208 #ifndef PRODUCT
1209 void MachSpillCopyNode::format(PhaseRegAlloc *ra_, outputStream* st) const {
1210 implementation( NULL, ra_, false, st );
1211 }
1212 #endif
1214 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1215 implementation( &cbuf, ra_, false, NULL );
1216 }
1218 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const {
1219 return implementation( NULL, ra_, true, NULL );
1220 }
1223 //=============================================================================
1224 #ifndef PRODUCT
1225 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1226 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1227 int reg = ra_->get_reg_first(this);
1228 st->print("LEA %s,[ESP + #%d]",Matcher::regName[reg],offset);
1229 }
1230 #endif
1232 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1233 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1234 int reg = ra_->get_encode(this);
1235 if( offset >= 128 ) {
1236 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1237 emit_rm(cbuf, 0x2, reg, 0x04);
1238 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1239 emit_d32(cbuf, offset);
1240 }
1241 else {
1242 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1243 emit_rm(cbuf, 0x1, reg, 0x04);
1244 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1245 emit_d8(cbuf, offset);
1246 }
1247 }
1249 uint BoxLockNode::size(PhaseRegAlloc *ra_) const {
1250 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1251 if( offset >= 128 ) {
1252 return 7;
1253 }
1254 else {
1255 return 4;
1256 }
1257 }
1259 //=============================================================================
1260 #ifndef PRODUCT
1261 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1262 st->print_cr( "CMP EAX,[ECX+4]\t# Inline cache check");
1263 st->print_cr("\tJNE SharedRuntime::handle_ic_miss_stub");
1264 st->print_cr("\tNOP");
1265 st->print_cr("\tNOP");
1266 if( !OptoBreakpoint )
1267 st->print_cr("\tNOP");
1268 }
1269 #endif
1271 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1272 MacroAssembler masm(&cbuf);
1273 #ifdef ASSERT
1274 uint insts_size = cbuf.insts_size();
1275 #endif
1276 masm.cmpptr(rax, Address(rcx, oopDesc::klass_offset_in_bytes()));
1277 masm.jump_cc(Assembler::notEqual,
1278 RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1279 /* WARNING these NOPs are critical so that verified entry point is properly
1280 aligned for patching by NativeJump::patch_verified_entry() */
1281 int nops_cnt = 2;
1282 if( !OptoBreakpoint ) // Leave space for int3
1283 nops_cnt += 1;
1284 masm.nop(nops_cnt);
1286 assert(cbuf.insts_size() - insts_size == size(ra_), "checking code size of inline cache node");
1287 }
1289 uint MachUEPNode::size(PhaseRegAlloc *ra_) const {
1290 return OptoBreakpoint ? 11 : 12;
1291 }
1294 //=============================================================================
1295 uint size_exception_handler() {
1296 // NativeCall instruction size is the same as NativeJump.
1297 // exception handler starts out as jump and can be patched to
1298 // a call be deoptimization. (4932387)
1299 // Note that this value is also credited (in output.cpp) to
1300 // the size of the code section.
1301 return NativeJump::instruction_size;
1302 }
1304 // Emit exception handler code. Stuff framesize into a register
1305 // and call a VM stub routine.
1306 int emit_exception_handler(CodeBuffer& cbuf) {
1308 // Note that the code buffer's insts_mark is always relative to insts.
1309 // That's why we must use the macroassembler to generate a handler.
1310 MacroAssembler _masm(&cbuf);
1311 address base =
1312 __ start_a_stub(size_exception_handler());
1313 if (base == NULL) return 0; // CodeBuffer::expand failed
1314 int offset = __ offset();
1315 __ jump(RuntimeAddress(OptoRuntime::exception_blob()->entry_point()));
1316 assert(__ offset() - offset <= (int) size_exception_handler(), "overflow");
1317 __ end_a_stub();
1318 return offset;
1319 }
1321 uint size_deopt_handler() {
1322 // NativeCall instruction size is the same as NativeJump.
1323 // exception handler starts out as jump and can be patched to
1324 // a call be deoptimization. (4932387)
1325 // Note that this value is also credited (in output.cpp) to
1326 // the size of the code section.
1327 return 5 + NativeJump::instruction_size; // pushl(); jmp;
1328 }
1330 // Emit deopt handler code.
1331 int emit_deopt_handler(CodeBuffer& cbuf) {
1333 // Note that the code buffer's insts_mark is always relative to insts.
1334 // That's why we must use the macroassembler to generate a handler.
1335 MacroAssembler _masm(&cbuf);
1336 address base =
1337 __ start_a_stub(size_exception_handler());
1338 if (base == NULL) return 0; // CodeBuffer::expand failed
1339 int offset = __ offset();
1340 InternalAddress here(__ pc());
1341 __ pushptr(here.addr());
1343 __ jump(RuntimeAddress(SharedRuntime::deopt_blob()->unpack()));
1344 assert(__ offset() - offset <= (int) size_deopt_handler(), "overflow");
1345 __ end_a_stub();
1346 return offset;
1347 }
1349 int Matcher::regnum_to_fpu_offset(int regnum) {
1350 return regnum - 32; // The FP registers are in the second chunk
1351 }
1353 // This is UltraSparc specific, true just means we have fast l2f conversion
1354 const bool Matcher::convL2FSupported(void) {
1355 return true;
1356 }
1358 // Is this branch offset short enough that a short branch can be used?
1359 //
1360 // NOTE: If the platform does not provide any short branch variants, then
1361 // this method should return false for offset 0.
1362 bool Matcher::is_short_branch_offset(int rule, int br_size, int offset) {
1363 // The passed offset is relative to address of the branch.
1364 // On 86 a branch displacement is calculated relative to address
1365 // of a next instruction.
1366 offset -= br_size;
1368 // the short version of jmpConUCF2 contains multiple branches,
1369 // making the reach slightly less
1370 if (rule == jmpConUCF2_rule)
1371 return (-126 <= offset && offset <= 125);
1372 return (-128 <= offset && offset <= 127);
1373 }
1375 const bool Matcher::isSimpleConstant64(jlong value) {
1376 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?.
1377 return false;
1378 }
1380 // The ecx parameter to rep stos for the ClearArray node is in dwords.
1381 const bool Matcher::init_array_count_is_in_bytes = false;
1383 // Threshold size for cleararray.
1384 const int Matcher::init_array_short_size = 8 * BytesPerLong;
1386 // Needs 2 CMOV's for longs.
1387 const int Matcher::long_cmove_cost() { return 1; }
1389 // No CMOVF/CMOVD with SSE/SSE2
1390 const int Matcher::float_cmove_cost() { return (UseSSE>=1) ? ConditionalMoveLimit : 0; }
1392 // Should the Matcher clone shifts on addressing modes, expecting them to
1393 // be subsumed into complex addressing expressions or compute them into
1394 // registers? True for Intel but false for most RISCs
1395 const bool Matcher::clone_shift_expressions = true;
1397 // Do we need to mask the count passed to shift instructions or does
1398 // the cpu only look at the lower 5/6 bits anyway?
1399 const bool Matcher::need_masked_shift_count = false;
1401 bool Matcher::narrow_oop_use_complex_address() {
1402 ShouldNotCallThis();
1403 return true;
1404 }
1406 bool Matcher::narrow_klass_use_complex_address() {
1407 ShouldNotCallThis();
1408 return true;
1409 }
1412 // Is it better to copy float constants, or load them directly from memory?
1413 // Intel can load a float constant from a direct address, requiring no
1414 // extra registers. Most RISCs will have to materialize an address into a
1415 // register first, so they would do better to copy the constant from stack.
1416 const bool Matcher::rematerialize_float_constants = true;
1418 // If CPU can load and store mis-aligned doubles directly then no fixup is
1419 // needed. Else we split the double into 2 integer pieces and move it
1420 // piece-by-piece. Only happens when passing doubles into C code as the
1421 // Java calling convention forces doubles to be aligned.
1422 const bool Matcher::misaligned_doubles_ok = true;
1425 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) {
1426 // Get the memory operand from the node
1427 uint numopnds = node->num_opnds(); // Virtual call for number of operands
1428 uint skipped = node->oper_input_base(); // Sum of leaves skipped so far
1429 assert( idx >= skipped, "idx too low in pd_implicit_null_fixup" );
1430 uint opcnt = 1; // First operand
1431 uint num_edges = node->_opnds[1]->num_edges(); // leaves for first operand
1432 while( idx >= skipped+num_edges ) {
1433 skipped += num_edges;
1434 opcnt++; // Bump operand count
1435 assert( opcnt < numopnds, "Accessing non-existent operand" );
1436 num_edges = node->_opnds[opcnt]->num_edges(); // leaves for next operand
1437 }
1439 MachOper *memory = node->_opnds[opcnt];
1440 MachOper *new_memory = NULL;
1441 switch (memory->opcode()) {
1442 case DIRECT:
1443 case INDOFFSET32X:
1444 // No transformation necessary.
1445 return;
1446 case INDIRECT:
1447 new_memory = new (C) indirect_win95_safeOper( );
1448 break;
1449 case INDOFFSET8:
1450 new_memory = new (C) indOffset8_win95_safeOper(memory->disp(NULL, NULL, 0));
1451 break;
1452 case INDOFFSET32:
1453 new_memory = new (C) indOffset32_win95_safeOper(memory->disp(NULL, NULL, 0));
1454 break;
1455 case INDINDEXOFFSET:
1456 new_memory = new (C) indIndexOffset_win95_safeOper(memory->disp(NULL, NULL, 0));
1457 break;
1458 case INDINDEXSCALE:
1459 new_memory = new (C) indIndexScale_win95_safeOper(memory->scale());
1460 break;
1461 case INDINDEXSCALEOFFSET:
1462 new_memory = new (C) indIndexScaleOffset_win95_safeOper(memory->scale(), memory->disp(NULL, NULL, 0));
1463 break;
1464 case LOAD_LONG_INDIRECT:
1465 case LOAD_LONG_INDOFFSET32:
1466 // Does not use EBP as address register, use { EDX, EBX, EDI, ESI}
1467 return;
1468 default:
1469 assert(false, "unexpected memory operand in pd_implicit_null_fixup()");
1470 return;
1471 }
1472 node->_opnds[opcnt] = new_memory;
1473 }
1475 // Advertise here if the CPU requires explicit rounding operations
1476 // to implement the UseStrictFP mode.
1477 const bool Matcher::strict_fp_requires_explicit_rounding = true;
1479 // Are floats conerted to double when stored to stack during deoptimization?
1480 // On x32 it is stored with convertion only when FPU is used for floats.
1481 bool Matcher::float_in_double() { return (UseSSE == 0); }
1483 // Do ints take an entire long register or just half?
1484 const bool Matcher::int_in_long = false;
1486 // Return whether or not this register is ever used as an argument. This
1487 // function is used on startup to build the trampoline stubs in generateOptoStub.
1488 // Registers not mentioned will be killed by the VM call in the trampoline, and
1489 // arguments in those registers not be available to the callee.
1490 bool Matcher::can_be_java_arg( int reg ) {
1491 if( reg == ECX_num || reg == EDX_num ) return true;
1492 if( (reg == XMM0_num || reg == XMM1_num ) && UseSSE>=1 ) return true;
1493 if( (reg == XMM0b_num || reg == XMM1b_num) && UseSSE>=2 ) return true;
1494 return false;
1495 }
1497 bool Matcher::is_spillable_arg( int reg ) {
1498 return can_be_java_arg(reg);
1499 }
1501 bool Matcher::use_asm_for_ldiv_by_con( jlong divisor ) {
1502 // Use hardware integer DIV instruction when
1503 // it is faster than a code which use multiply.
1504 // Only when constant divisor fits into 32 bit
1505 // (min_jint is excluded to get only correct
1506 // positive 32 bit values from negative).
1507 return VM_Version::has_fast_idiv() &&
1508 (divisor == (int)divisor && divisor != min_jint);
1509 }
1511 // Register for DIVI projection of divmodI
1512 RegMask Matcher::divI_proj_mask() {
1513 return EAX_REG_mask();
1514 }
1516 // Register for MODI projection of divmodI
1517 RegMask Matcher::modI_proj_mask() {
1518 return EDX_REG_mask();
1519 }
1521 // Register for DIVL projection of divmodL
1522 RegMask Matcher::divL_proj_mask() {
1523 ShouldNotReachHere();
1524 return RegMask();
1525 }
1527 // Register for MODL projection of divmodL
1528 RegMask Matcher::modL_proj_mask() {
1529 ShouldNotReachHere();
1530 return RegMask();
1531 }
1533 const RegMask Matcher::method_handle_invoke_SP_save_mask() {
1534 return EBP_REG_mask();
1535 }
1537 // Returns true if the high 32 bits of the value is known to be zero.
1538 bool is_operand_hi32_zero(Node* n) {
1539 int opc = n->Opcode();
1540 if (opc == Op_AndL) {
1541 Node* o2 = n->in(2);
1542 if (o2->is_Con() && (o2->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1543 return true;
1544 }
1545 }
1546 if (opc == Op_ConL && (n->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1547 return true;
1548 }
1549 return false;
1550 }
1552 %}
1554 //----------ENCODING BLOCK-----------------------------------------------------
1555 // This block specifies the encoding classes used by the compiler to output
1556 // byte streams. Encoding classes generate functions which are called by
1557 // Machine Instruction Nodes in order to generate the bit encoding of the
1558 // instruction. Operands specify their base encoding interface with the
1559 // interface keyword. There are currently supported four interfaces,
1560 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an
1561 // operand to generate a function which returns its register number when
1562 // queried. CONST_INTER causes an operand to generate a function which
1563 // returns the value of the constant when queried. MEMORY_INTER causes an
1564 // operand to generate four functions which return the Base Register, the
1565 // Index Register, the Scale Value, and the Offset Value of the operand when
1566 // queried. COND_INTER causes an operand to generate six functions which
1567 // return the encoding code (ie - encoding bits for the instruction)
1568 // associated with each basic boolean condition for a conditional instruction.
1569 // Instructions specify two basic values for encoding. They use the
1570 // ins_encode keyword to specify their encoding class (which must be one of
1571 // the class names specified in the encoding block), and they use the
1572 // opcode keyword to specify, in order, their primary, secondary, and
1573 // tertiary opcode. Only the opcode sections which a particular instruction
1574 // needs for encoding need to be specified.
1575 encode %{
1576 // Build emit functions for each basic byte or larger field in the intel
1577 // encoding scheme (opcode, rm, sib, immediate), and call them from C++
1578 // code in the enc_class source block. Emit functions will live in the
1579 // main source block for now. In future, we can generalize this by
1580 // adding a syntax that specifies the sizes of fields in an order,
1581 // so that the adlc can build the emit functions automagically
1583 // Emit primary opcode
1584 enc_class OpcP %{
1585 emit_opcode(cbuf, $primary);
1586 %}
1588 // Emit secondary opcode
1589 enc_class OpcS %{
1590 emit_opcode(cbuf, $secondary);
1591 %}
1593 // Emit opcode directly
1594 enc_class Opcode(immI d8) %{
1595 emit_opcode(cbuf, $d8$$constant);
1596 %}
1598 enc_class SizePrefix %{
1599 emit_opcode(cbuf,0x66);
1600 %}
1602 enc_class RegReg (rRegI dst, rRegI src) %{ // RegReg(Many)
1603 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1604 %}
1606 enc_class OpcRegReg (immI opcode, rRegI dst, rRegI src) %{ // OpcRegReg(Many)
1607 emit_opcode(cbuf,$opcode$$constant);
1608 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1609 %}
1611 enc_class mov_r32_imm0( rRegI dst ) %{
1612 emit_opcode( cbuf, 0xB8 + $dst$$reg ); // 0xB8+ rd -- MOV r32 ,imm32
1613 emit_d32 ( cbuf, 0x0 ); // imm32==0x0
1614 %}
1616 enc_class cdq_enc %{
1617 // Full implementation of Java idiv and irem; checks for
1618 // special case as described in JVM spec., p.243 & p.271.
1619 //
1620 // normal case special case
1621 //
1622 // input : rax,: dividend min_int
1623 // reg: divisor -1
1624 //
1625 // output: rax,: quotient (= rax, idiv reg) min_int
1626 // rdx: remainder (= rax, irem reg) 0
1627 //
1628 // Code sequnce:
1629 //
1630 // 81 F8 00 00 00 80 cmp rax,80000000h
1631 // 0F 85 0B 00 00 00 jne normal_case
1632 // 33 D2 xor rdx,edx
1633 // 83 F9 FF cmp rcx,0FFh
1634 // 0F 84 03 00 00 00 je done
1635 // normal_case:
1636 // 99 cdq
1637 // F7 F9 idiv rax,ecx
1638 // done:
1639 //
1640 emit_opcode(cbuf,0x81); emit_d8(cbuf,0xF8);
1641 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00);
1642 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x80); // cmp rax,80000000h
1643 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x85);
1644 emit_opcode(cbuf,0x0B); emit_d8(cbuf,0x00);
1645 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // jne normal_case
1646 emit_opcode(cbuf,0x33); emit_d8(cbuf,0xD2); // xor rdx,edx
1647 emit_opcode(cbuf,0x83); emit_d8(cbuf,0xF9); emit_d8(cbuf,0xFF); // cmp rcx,0FFh
1648 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x84);
1649 emit_opcode(cbuf,0x03); emit_d8(cbuf,0x00);
1650 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // je done
1651 // normal_case:
1652 emit_opcode(cbuf,0x99); // cdq
1653 // idiv (note: must be emitted by the user of this rule)
1654 // normal:
1655 %}
1657 // Dense encoding for older common ops
1658 enc_class Opc_plus(immI opcode, rRegI reg) %{
1659 emit_opcode(cbuf, $opcode$$constant + $reg$$reg);
1660 %}
1663 // Opcde enc_class for 8/32 bit immediate instructions with sign-extension
1664 enc_class OpcSE (immI imm) %{ // Emit primary opcode and set sign-extend bit
1665 // Check for 8-bit immediate, and set sign extend bit in opcode
1666 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1667 emit_opcode(cbuf, $primary | 0x02);
1668 }
1669 else { // If 32-bit immediate
1670 emit_opcode(cbuf, $primary);
1671 }
1672 %}
1674 enc_class OpcSErm (rRegI dst, immI imm) %{ // OpcSEr/m
1675 // Emit primary opcode and set sign-extend bit
1676 // Check for 8-bit immediate, and set sign extend bit in opcode
1677 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1678 emit_opcode(cbuf, $primary | 0x02); }
1679 else { // If 32-bit immediate
1680 emit_opcode(cbuf, $primary);
1681 }
1682 // Emit r/m byte with secondary opcode, after primary opcode.
1683 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1684 %}
1686 enc_class Con8or32 (immI imm) %{ // Con8or32(storeImmI), 8 or 32 bits
1687 // Check for 8-bit immediate, and set sign extend bit in opcode
1688 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1689 $$$emit8$imm$$constant;
1690 }
1691 else { // If 32-bit immediate
1692 // Output immediate
1693 $$$emit32$imm$$constant;
1694 }
1695 %}
1697 enc_class Long_OpcSErm_Lo(eRegL dst, immL imm) %{
1698 // Emit primary opcode and set sign-extend bit
1699 // Check for 8-bit immediate, and set sign extend bit in opcode
1700 int con = (int)$imm$$constant; // Throw away top bits
1701 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1702 // Emit r/m byte with secondary opcode, after primary opcode.
1703 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1704 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1705 else emit_d32(cbuf,con);
1706 %}
1708 enc_class Long_OpcSErm_Hi(eRegL dst, immL imm) %{
1709 // Emit primary opcode and set sign-extend bit
1710 // Check for 8-bit immediate, and set sign extend bit in opcode
1711 int con = (int)($imm$$constant >> 32); // Throw away bottom bits
1712 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1713 // Emit r/m byte with tertiary opcode, after primary opcode.
1714 emit_rm(cbuf, 0x3, $tertiary, HIGH_FROM_LOW($dst$$reg));
1715 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1716 else emit_d32(cbuf,con);
1717 %}
1719 enc_class OpcSReg (rRegI dst) %{ // BSWAP
1720 emit_cc(cbuf, $secondary, $dst$$reg );
1721 %}
1723 enc_class bswap_long_bytes(eRegL dst) %{ // BSWAP
1724 int destlo = $dst$$reg;
1725 int desthi = HIGH_FROM_LOW(destlo);
1726 // bswap lo
1727 emit_opcode(cbuf, 0x0F);
1728 emit_cc(cbuf, 0xC8, destlo);
1729 // bswap hi
1730 emit_opcode(cbuf, 0x0F);
1731 emit_cc(cbuf, 0xC8, desthi);
1732 // xchg lo and hi
1733 emit_opcode(cbuf, 0x87);
1734 emit_rm(cbuf, 0x3, destlo, desthi);
1735 %}
1737 enc_class RegOpc (rRegI div) %{ // IDIV, IMOD, JMP indirect, ...
1738 emit_rm(cbuf, 0x3, $secondary, $div$$reg );
1739 %}
1741 enc_class enc_cmov(cmpOp cop ) %{ // CMOV
1742 $$$emit8$primary;
1743 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1744 %}
1746 enc_class enc_cmov_dpr(cmpOp cop, regDPR src ) %{ // CMOV
1747 int op = 0xDA00 + $cop$$cmpcode + ($src$$reg-1);
1748 emit_d8(cbuf, op >> 8 );
1749 emit_d8(cbuf, op & 255);
1750 %}
1752 // emulate a CMOV with a conditional branch around a MOV
1753 enc_class enc_cmov_branch( cmpOp cop, immI brOffs ) %{ // CMOV
1754 // Invert sense of branch from sense of CMOV
1755 emit_cc( cbuf, 0x70, ($cop$$cmpcode^1) );
1756 emit_d8( cbuf, $brOffs$$constant );
1757 %}
1759 enc_class enc_PartialSubtypeCheck( ) %{
1760 Register Redi = as_Register(EDI_enc); // result register
1761 Register Reax = as_Register(EAX_enc); // super class
1762 Register Recx = as_Register(ECX_enc); // killed
1763 Register Resi = as_Register(ESI_enc); // sub class
1764 Label miss;
1766 MacroAssembler _masm(&cbuf);
1767 __ check_klass_subtype_slow_path(Resi, Reax, Recx, Redi,
1768 NULL, &miss,
1769 /*set_cond_codes:*/ true);
1770 if ($primary) {
1771 __ xorptr(Redi, Redi);
1772 }
1773 __ bind(miss);
1774 %}
1776 enc_class FFree_Float_Stack_All %{ // Free_Float_Stack_All
1777 MacroAssembler masm(&cbuf);
1778 int start = masm.offset();
1779 if (UseSSE >= 2) {
1780 if (VerifyFPU) {
1781 masm.verify_FPU(0, "must be empty in SSE2+ mode");
1782 }
1783 } else {
1784 // External c_calling_convention expects the FPU stack to be 'clean'.
1785 // Compiled code leaves it dirty. Do cleanup now.
1786 masm.empty_FPU_stack();
1787 }
1788 if (sizeof_FFree_Float_Stack_All == -1) {
1789 sizeof_FFree_Float_Stack_All = masm.offset() - start;
1790 } else {
1791 assert(masm.offset() - start == sizeof_FFree_Float_Stack_All, "wrong size");
1792 }
1793 %}
1795 enc_class Verify_FPU_For_Leaf %{
1796 if( VerifyFPU ) {
1797 MacroAssembler masm(&cbuf);
1798 masm.verify_FPU( -3, "Returning from Runtime Leaf call");
1799 }
1800 %}
1802 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime, Java_To_Runtime_Leaf
1803 // This is the instruction starting address for relocation info.
1804 cbuf.set_insts_mark();
1805 $$$emit8$primary;
1806 // CALL directly to the runtime
1807 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1808 runtime_call_Relocation::spec(), RELOC_IMM32 );
1810 if (UseSSE >= 2) {
1811 MacroAssembler _masm(&cbuf);
1812 BasicType rt = tf()->return_type();
1814 if ((rt == T_FLOAT || rt == T_DOUBLE) && !return_value_is_used()) {
1815 // A C runtime call where the return value is unused. In SSE2+
1816 // mode the result needs to be removed from the FPU stack. It's
1817 // likely that this function call could be removed by the
1818 // optimizer if the C function is a pure function.
1819 __ ffree(0);
1820 } else if (rt == T_FLOAT) {
1821 __ lea(rsp, Address(rsp, -4));
1822 __ fstp_s(Address(rsp, 0));
1823 __ movflt(xmm0, Address(rsp, 0));
1824 __ lea(rsp, Address(rsp, 4));
1825 } else if (rt == T_DOUBLE) {
1826 __ lea(rsp, Address(rsp, -8));
1827 __ fstp_d(Address(rsp, 0));
1828 __ movdbl(xmm0, Address(rsp, 0));
1829 __ lea(rsp, Address(rsp, 8));
1830 }
1831 }
1832 %}
1835 enc_class pre_call_resets %{
1836 // If method sets FPU control word restore it here
1837 debug_only(int off0 = cbuf.insts_size());
1838 if (ra_->C->in_24_bit_fp_mode()) {
1839 MacroAssembler _masm(&cbuf);
1840 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1841 }
1842 if (ra_->C->max_vector_size() > 16) {
1843 // Clear upper bits of YMM registers when current compiled code uses
1844 // wide vectors to avoid AVX <-> SSE transition penalty during call.
1845 MacroAssembler _masm(&cbuf);
1846 __ vzeroupper();
1847 }
1848 debug_only(int off1 = cbuf.insts_size());
1849 assert(off1 - off0 == pre_call_resets_size(), "correct size prediction");
1850 %}
1852 enc_class post_call_FPU %{
1853 // If method sets FPU control word do it here also
1854 if (Compile::current()->in_24_bit_fp_mode()) {
1855 MacroAssembler masm(&cbuf);
1856 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
1857 }
1858 %}
1860 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL
1861 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1862 // who we intended to call.
1863 cbuf.set_insts_mark();
1864 $$$emit8$primary;
1865 if (!_method) {
1866 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1867 runtime_call_Relocation::spec(), RELOC_IMM32 );
1868 } else if (_optimized_virtual) {
1869 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1870 opt_virtual_call_Relocation::spec(), RELOC_IMM32 );
1871 } else {
1872 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1873 static_call_Relocation::spec(), RELOC_IMM32 );
1874 }
1875 if (_method) { // Emit stub for static call.
1876 CompiledStaticCall::emit_to_interp_stub(cbuf);
1877 }
1878 %}
1880 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL
1881 MacroAssembler _masm(&cbuf);
1882 __ ic_call((address)$meth$$method);
1883 %}
1885 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL
1886 int disp = in_bytes(Method::from_compiled_offset());
1887 assert( -128 <= disp && disp <= 127, "compiled_code_offset isn't small");
1889 // CALL *[EAX+in_bytes(Method::from_compiled_code_entry_point_offset())]
1890 cbuf.set_insts_mark();
1891 $$$emit8$primary;
1892 emit_rm(cbuf, 0x01, $secondary, EAX_enc ); // R/M byte
1893 emit_d8(cbuf, disp); // Displacement
1895 %}
1897 // Following encoding is no longer used, but may be restored if calling
1898 // convention changes significantly.
1899 // Became: Xor_Reg(EBP), Java_To_Runtime( labl )
1900 //
1901 // enc_class Java_Interpreter_Call (label labl) %{ // JAVA INTERPRETER CALL
1902 // // int ic_reg = Matcher::inline_cache_reg();
1903 // // int ic_encode = Matcher::_regEncode[ic_reg];
1904 // // int imo_reg = Matcher::interpreter_method_oop_reg();
1905 // // int imo_encode = Matcher::_regEncode[imo_reg];
1906 //
1907 // // // Interpreter expects method_oop in EBX, currently a callee-saved register,
1908 // // // so we load it immediately before the call
1909 // // emit_opcode(cbuf, 0x8B); // MOV imo_reg,ic_reg # method_oop
1910 // // emit_rm(cbuf, 0x03, imo_encode, ic_encode ); // R/M byte
1911 //
1912 // // xor rbp,ebp
1913 // emit_opcode(cbuf, 0x33);
1914 // emit_rm(cbuf, 0x3, EBP_enc, EBP_enc);
1915 //
1916 // // CALL to interpreter.
1917 // cbuf.set_insts_mark();
1918 // $$$emit8$primary;
1919 // emit_d32_reloc(cbuf, ($labl$$label - (int)(cbuf.insts_end()) - 4),
1920 // runtime_call_Relocation::spec(), RELOC_IMM32 );
1921 // %}
1923 enc_class RegOpcImm (rRegI dst, immI8 shift) %{ // SHL, SAR, SHR
1924 $$$emit8$primary;
1925 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1926 $$$emit8$shift$$constant;
1927 %}
1929 enc_class LdImmI (rRegI dst, immI src) %{ // Load Immediate
1930 // Load immediate does not have a zero or sign extended version
1931 // for 8-bit immediates
1932 emit_opcode(cbuf, 0xB8 + $dst$$reg);
1933 $$$emit32$src$$constant;
1934 %}
1936 enc_class LdImmP (rRegI dst, immI src) %{ // Load Immediate
1937 // Load immediate does not have a zero or sign extended version
1938 // for 8-bit immediates
1939 emit_opcode(cbuf, $primary + $dst$$reg);
1940 $$$emit32$src$$constant;
1941 %}
1943 enc_class LdImmL_Lo( eRegL dst, immL src) %{ // Load Immediate
1944 // Load immediate does not have a zero or sign extended version
1945 // for 8-bit immediates
1946 int dst_enc = $dst$$reg;
1947 int src_con = $src$$constant & 0x0FFFFFFFFL;
1948 if (src_con == 0) {
1949 // xor dst, dst
1950 emit_opcode(cbuf, 0x33);
1951 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1952 } else {
1953 emit_opcode(cbuf, $primary + dst_enc);
1954 emit_d32(cbuf, src_con);
1955 }
1956 %}
1958 enc_class LdImmL_Hi( eRegL dst, immL src) %{ // Load Immediate
1959 // Load immediate does not have a zero or sign extended version
1960 // for 8-bit immediates
1961 int dst_enc = $dst$$reg + 2;
1962 int src_con = ((julong)($src$$constant)) >> 32;
1963 if (src_con == 0) {
1964 // xor dst, dst
1965 emit_opcode(cbuf, 0x33);
1966 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1967 } else {
1968 emit_opcode(cbuf, $primary + dst_enc);
1969 emit_d32(cbuf, src_con);
1970 }
1971 %}
1974 // Encode a reg-reg copy. If it is useless, then empty encoding.
1975 enc_class enc_Copy( rRegI dst, rRegI src ) %{
1976 encode_Copy( cbuf, $dst$$reg, $src$$reg );
1977 %}
1979 enc_class enc_CopyL_Lo( rRegI dst, eRegL src ) %{
1980 encode_Copy( cbuf, $dst$$reg, $src$$reg );
1981 %}
1983 enc_class RegReg (rRegI dst, rRegI src) %{ // RegReg(Many)
1984 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1985 %}
1987 enc_class RegReg_Lo(eRegL dst, eRegL src) %{ // RegReg(Many)
1988 $$$emit8$primary;
1989 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1990 %}
1992 enc_class RegReg_Hi(eRegL dst, eRegL src) %{ // RegReg(Many)
1993 $$$emit8$secondary;
1994 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
1995 %}
1997 enc_class RegReg_Lo2(eRegL dst, eRegL src) %{ // RegReg(Many)
1998 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1999 %}
2001 enc_class RegReg_Hi2(eRegL dst, eRegL src) %{ // RegReg(Many)
2002 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2003 %}
2005 enc_class RegReg_HiLo( eRegL src, rRegI dst ) %{
2006 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($src$$reg));
2007 %}
2009 enc_class Con32 (immI src) %{ // Con32(storeImmI)
2010 // Output immediate
2011 $$$emit32$src$$constant;
2012 %}
2014 enc_class Con32FPR_as_bits(immFPR src) %{ // storeF_imm
2015 // Output Float immediate bits
2016 jfloat jf = $src$$constant;
2017 int jf_as_bits = jint_cast( jf );
2018 emit_d32(cbuf, jf_as_bits);
2019 %}
2021 enc_class Con32F_as_bits(immF src) %{ // storeX_imm
2022 // Output Float immediate bits
2023 jfloat jf = $src$$constant;
2024 int jf_as_bits = jint_cast( jf );
2025 emit_d32(cbuf, jf_as_bits);
2026 %}
2028 enc_class Con16 (immI src) %{ // Con16(storeImmI)
2029 // Output immediate
2030 $$$emit16$src$$constant;
2031 %}
2033 enc_class Con_d32(immI src) %{
2034 emit_d32(cbuf,$src$$constant);
2035 %}
2037 enc_class conmemref (eRegP t1) %{ // Con32(storeImmI)
2038 // Output immediate memory reference
2039 emit_rm(cbuf, 0x00, $t1$$reg, 0x05 );
2040 emit_d32(cbuf, 0x00);
2041 %}
2043 enc_class lock_prefix( ) %{
2044 if( os::is_MP() )
2045 emit_opcode(cbuf,0xF0); // [Lock]
2046 %}
2048 // Cmp-xchg long value.
2049 // Note: we need to swap rbx, and rcx before and after the
2050 // cmpxchg8 instruction because the instruction uses
2051 // rcx as the high order word of the new value to store but
2052 // our register encoding uses rbx,.
2053 enc_class enc_cmpxchg8(eSIRegP mem_ptr) %{
2055 // XCHG rbx,ecx
2056 emit_opcode(cbuf,0x87);
2057 emit_opcode(cbuf,0xD9);
2058 // [Lock]
2059 if( os::is_MP() )
2060 emit_opcode(cbuf,0xF0);
2061 // CMPXCHG8 [Eptr]
2062 emit_opcode(cbuf,0x0F);
2063 emit_opcode(cbuf,0xC7);
2064 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2065 // XCHG rbx,ecx
2066 emit_opcode(cbuf,0x87);
2067 emit_opcode(cbuf,0xD9);
2068 %}
2070 enc_class enc_cmpxchg(eSIRegP mem_ptr) %{
2071 // [Lock]
2072 if( os::is_MP() )
2073 emit_opcode(cbuf,0xF0);
2075 // CMPXCHG [Eptr]
2076 emit_opcode(cbuf,0x0F);
2077 emit_opcode(cbuf,0xB1);
2078 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2079 %}
2081 enc_class enc_flags_ne_to_boolean( iRegI res ) %{
2082 int res_encoding = $res$$reg;
2084 // MOV res,0
2085 emit_opcode( cbuf, 0xB8 + res_encoding);
2086 emit_d32( cbuf, 0 );
2087 // JNE,s fail
2088 emit_opcode(cbuf,0x75);
2089 emit_d8(cbuf, 5 );
2090 // MOV res,1
2091 emit_opcode( cbuf, 0xB8 + res_encoding);
2092 emit_d32( cbuf, 1 );
2093 // fail:
2094 %}
2096 enc_class set_instruction_start( ) %{
2097 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2098 %}
2100 enc_class RegMem (rRegI ereg, memory mem) %{ // emit_reg_mem
2101 int reg_encoding = $ereg$$reg;
2102 int base = $mem$$base;
2103 int index = $mem$$index;
2104 int scale = $mem$$scale;
2105 int displace = $mem$$disp;
2106 relocInfo::relocType disp_reloc = $mem->disp_reloc();
2107 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2108 %}
2110 enc_class RegMem_Hi(eRegL ereg, memory mem) %{ // emit_reg_mem
2111 int reg_encoding = HIGH_FROM_LOW($ereg$$reg); // Hi register of pair, computed from lo
2112 int base = $mem$$base;
2113 int index = $mem$$index;
2114 int scale = $mem$$scale;
2115 int displace = $mem$$disp + 4; // Offset is 4 further in memory
2116 assert( $mem->disp_reloc() == relocInfo::none, "Cannot add 4 to oop" );
2117 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, relocInfo::none);
2118 %}
2120 enc_class move_long_small_shift( eRegL dst, immI_1_31 cnt ) %{
2121 int r1, r2;
2122 if( $tertiary == 0xA4 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2123 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2124 emit_opcode(cbuf,0x0F);
2125 emit_opcode(cbuf,$tertiary);
2126 emit_rm(cbuf, 0x3, r1, r2);
2127 emit_d8(cbuf,$cnt$$constant);
2128 emit_d8(cbuf,$primary);
2129 emit_rm(cbuf, 0x3, $secondary, r1);
2130 emit_d8(cbuf,$cnt$$constant);
2131 %}
2133 enc_class move_long_big_shift_sign( eRegL dst, immI_32_63 cnt ) %{
2134 emit_opcode( cbuf, 0x8B ); // Move
2135 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2136 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2137 emit_d8(cbuf,$primary);
2138 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
2139 emit_d8(cbuf,$cnt$$constant-32);
2140 }
2141 emit_d8(cbuf,$primary);
2142 emit_rm(cbuf, 0x3, $secondary, HIGH_FROM_LOW($dst$$reg));
2143 emit_d8(cbuf,31);
2144 %}
2146 enc_class move_long_big_shift_clr( eRegL dst, immI_32_63 cnt ) %{
2147 int r1, r2;
2148 if( $secondary == 0x5 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2149 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2151 emit_opcode( cbuf, 0x8B ); // Move r1,r2
2152 emit_rm(cbuf, 0x3, r1, r2);
2153 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2154 emit_opcode(cbuf,$primary);
2155 emit_rm(cbuf, 0x3, $secondary, r1);
2156 emit_d8(cbuf,$cnt$$constant-32);
2157 }
2158 emit_opcode(cbuf,0x33); // XOR r2,r2
2159 emit_rm(cbuf, 0x3, r2, r2);
2160 %}
2162 // Clone of RegMem but accepts an extra parameter to access each
2163 // half of a double in memory; it never needs relocation info.
2164 enc_class Mov_MemD_half_to_Reg (immI opcode, memory mem, immI disp_for_half, rRegI rm_reg) %{
2165 emit_opcode(cbuf,$opcode$$constant);
2166 int reg_encoding = $rm_reg$$reg;
2167 int base = $mem$$base;
2168 int index = $mem$$index;
2169 int scale = $mem$$scale;
2170 int displace = $mem$$disp + $disp_for_half$$constant;
2171 relocInfo::relocType disp_reloc = relocInfo::none;
2172 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2173 %}
2175 // !!!!! Special Custom Code used by MemMove, and stack access instructions !!!!!
2176 //
2177 // Clone of RegMem except the RM-byte's reg/opcode field is an ADLC-time constant
2178 // and it never needs relocation information.
2179 // Frequently used to move data between FPU's Stack Top and memory.
2180 enc_class RMopc_Mem_no_oop (immI rm_opcode, memory mem) %{
2181 int rm_byte_opcode = $rm_opcode$$constant;
2182 int base = $mem$$base;
2183 int index = $mem$$index;
2184 int scale = $mem$$scale;
2185 int displace = $mem$$disp;
2186 assert( $mem->disp_reloc() == relocInfo::none, "No oops here because no reloc info allowed" );
2187 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, relocInfo::none);
2188 %}
2190 enc_class RMopc_Mem (immI rm_opcode, memory mem) %{
2191 int rm_byte_opcode = $rm_opcode$$constant;
2192 int base = $mem$$base;
2193 int index = $mem$$index;
2194 int scale = $mem$$scale;
2195 int displace = $mem$$disp;
2196 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
2197 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
2198 %}
2200 enc_class RegLea (rRegI dst, rRegI src0, immI src1 ) %{ // emit_reg_lea
2201 int reg_encoding = $dst$$reg;
2202 int base = $src0$$reg; // 0xFFFFFFFF indicates no base
2203 int index = 0x04; // 0x04 indicates no index
2204 int scale = 0x00; // 0x00 indicates no scale
2205 int displace = $src1$$constant; // 0x00 indicates no displacement
2206 relocInfo::relocType disp_reloc = relocInfo::none;
2207 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2208 %}
2210 enc_class min_enc (rRegI dst, rRegI src) %{ // MIN
2211 // Compare dst,src
2212 emit_opcode(cbuf,0x3B);
2213 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2214 // jmp dst < src around move
2215 emit_opcode(cbuf,0x7C);
2216 emit_d8(cbuf,2);
2217 // move dst,src
2218 emit_opcode(cbuf,0x8B);
2219 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2220 %}
2222 enc_class max_enc (rRegI dst, rRegI src) %{ // MAX
2223 // Compare dst,src
2224 emit_opcode(cbuf,0x3B);
2225 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2226 // jmp dst > src around move
2227 emit_opcode(cbuf,0x7F);
2228 emit_d8(cbuf,2);
2229 // move dst,src
2230 emit_opcode(cbuf,0x8B);
2231 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2232 %}
2234 enc_class enc_FPR_store(memory mem, regDPR src) %{
2235 // If src is FPR1, we can just FST to store it.
2236 // Else we need to FLD it to FPR1, then FSTP to store/pop it.
2237 int reg_encoding = 0x2; // Just store
2238 int base = $mem$$base;
2239 int index = $mem$$index;
2240 int scale = $mem$$scale;
2241 int displace = $mem$$disp;
2242 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
2243 if( $src$$reg != FPR1L_enc ) {
2244 reg_encoding = 0x3; // Store & pop
2245 emit_opcode( cbuf, 0xD9 ); // FLD (i.e., push it)
2246 emit_d8( cbuf, 0xC0-1+$src$$reg );
2247 }
2248 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2249 emit_opcode(cbuf,$primary);
2250 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2251 %}
2253 enc_class neg_reg(rRegI dst) %{
2254 // NEG $dst
2255 emit_opcode(cbuf,0xF7);
2256 emit_rm(cbuf, 0x3, 0x03, $dst$$reg );
2257 %}
2259 enc_class setLT_reg(eCXRegI dst) %{
2260 // SETLT $dst
2261 emit_opcode(cbuf,0x0F);
2262 emit_opcode(cbuf,0x9C);
2263 emit_rm( cbuf, 0x3, 0x4, $dst$$reg );
2264 %}
2266 enc_class enc_cmpLTP(ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp) %{ // cadd_cmpLT
2267 int tmpReg = $tmp$$reg;
2269 // SUB $p,$q
2270 emit_opcode(cbuf,0x2B);
2271 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2272 // SBB $tmp,$tmp
2273 emit_opcode(cbuf,0x1B);
2274 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2275 // AND $tmp,$y
2276 emit_opcode(cbuf,0x23);
2277 emit_rm(cbuf, 0x3, tmpReg, $y$$reg);
2278 // ADD $p,$tmp
2279 emit_opcode(cbuf,0x03);
2280 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2281 %}
2283 enc_class shift_left_long( eRegL dst, eCXRegI shift ) %{
2284 // TEST shift,32
2285 emit_opcode(cbuf,0xF7);
2286 emit_rm(cbuf, 0x3, 0, ECX_enc);
2287 emit_d32(cbuf,0x20);
2288 // JEQ,s small
2289 emit_opcode(cbuf, 0x74);
2290 emit_d8(cbuf, 0x04);
2291 // MOV $dst.hi,$dst.lo
2292 emit_opcode( cbuf, 0x8B );
2293 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2294 // CLR $dst.lo
2295 emit_opcode(cbuf, 0x33);
2296 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
2297 // small:
2298 // SHLD $dst.hi,$dst.lo,$shift
2299 emit_opcode(cbuf,0x0F);
2300 emit_opcode(cbuf,0xA5);
2301 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2302 // SHL $dst.lo,$shift"
2303 emit_opcode(cbuf,0xD3);
2304 emit_rm(cbuf, 0x3, 0x4, $dst$$reg );
2305 %}
2307 enc_class shift_right_long( eRegL dst, eCXRegI shift ) %{
2308 // TEST shift,32
2309 emit_opcode(cbuf,0xF7);
2310 emit_rm(cbuf, 0x3, 0, ECX_enc);
2311 emit_d32(cbuf,0x20);
2312 // JEQ,s small
2313 emit_opcode(cbuf, 0x74);
2314 emit_d8(cbuf, 0x04);
2315 // MOV $dst.lo,$dst.hi
2316 emit_opcode( cbuf, 0x8B );
2317 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2318 // CLR $dst.hi
2319 emit_opcode(cbuf, 0x33);
2320 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($dst$$reg));
2321 // small:
2322 // SHRD $dst.lo,$dst.hi,$shift
2323 emit_opcode(cbuf,0x0F);
2324 emit_opcode(cbuf,0xAD);
2325 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2326 // SHR $dst.hi,$shift"
2327 emit_opcode(cbuf,0xD3);
2328 emit_rm(cbuf, 0x3, 0x5, HIGH_FROM_LOW($dst$$reg) );
2329 %}
2331 enc_class shift_right_arith_long( eRegL dst, eCXRegI shift ) %{
2332 // TEST shift,32
2333 emit_opcode(cbuf,0xF7);
2334 emit_rm(cbuf, 0x3, 0, ECX_enc);
2335 emit_d32(cbuf,0x20);
2336 // JEQ,s small
2337 emit_opcode(cbuf, 0x74);
2338 emit_d8(cbuf, 0x05);
2339 // MOV $dst.lo,$dst.hi
2340 emit_opcode( cbuf, 0x8B );
2341 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2342 // SAR $dst.hi,31
2343 emit_opcode(cbuf, 0xC1);
2344 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW($dst$$reg) );
2345 emit_d8(cbuf, 0x1F );
2346 // small:
2347 // SHRD $dst.lo,$dst.hi,$shift
2348 emit_opcode(cbuf,0x0F);
2349 emit_opcode(cbuf,0xAD);
2350 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2351 // SAR $dst.hi,$shift"
2352 emit_opcode(cbuf,0xD3);
2353 emit_rm(cbuf, 0x3, 0x7, HIGH_FROM_LOW($dst$$reg) );
2354 %}
2357 // ----------------- Encodings for floating point unit -----------------
2358 // May leave result in FPU-TOS or FPU reg depending on opcodes
2359 enc_class OpcReg_FPR(regFPR src) %{ // FMUL, FDIV
2360 $$$emit8$primary;
2361 emit_rm(cbuf, 0x3, $secondary, $src$$reg );
2362 %}
2364 // Pop argument in FPR0 with FSTP ST(0)
2365 enc_class PopFPU() %{
2366 emit_opcode( cbuf, 0xDD );
2367 emit_d8( cbuf, 0xD8 );
2368 %}
2370 // !!!!! equivalent to Pop_Reg_F
2371 enc_class Pop_Reg_DPR( regDPR dst ) %{
2372 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2373 emit_d8( cbuf, 0xD8+$dst$$reg );
2374 %}
2376 enc_class Push_Reg_DPR( regDPR dst ) %{
2377 emit_opcode( cbuf, 0xD9 );
2378 emit_d8( cbuf, 0xC0-1+$dst$$reg ); // FLD ST(i-1)
2379 %}
2381 enc_class strictfp_bias1( regDPR dst ) %{
2382 emit_opcode( cbuf, 0xDB ); // FLD m80real
2383 emit_opcode( cbuf, 0x2D );
2384 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias1() );
2385 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2386 emit_opcode( cbuf, 0xC8+$dst$$reg );
2387 %}
2389 enc_class strictfp_bias2( regDPR dst ) %{
2390 emit_opcode( cbuf, 0xDB ); // FLD m80real
2391 emit_opcode( cbuf, 0x2D );
2392 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias2() );
2393 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2394 emit_opcode( cbuf, 0xC8+$dst$$reg );
2395 %}
2397 // Special case for moving an integer register to a stack slot.
2398 enc_class OpcPRegSS( stackSlotI dst, rRegI src ) %{ // RegSS
2399 store_to_stackslot( cbuf, $primary, $src$$reg, $dst$$disp );
2400 %}
2402 // Special case for moving a register to a stack slot.
2403 enc_class RegSS( stackSlotI dst, rRegI src ) %{ // RegSS
2404 // Opcode already emitted
2405 emit_rm( cbuf, 0x02, $src$$reg, ESP_enc ); // R/M byte
2406 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
2407 emit_d32(cbuf, $dst$$disp); // Displacement
2408 %}
2410 // Push the integer in stackSlot 'src' onto FP-stack
2411 enc_class Push_Mem_I( memory src ) %{ // FILD [ESP+src]
2412 store_to_stackslot( cbuf, $primary, $secondary, $src$$disp );
2413 %}
2415 // Push FPU's TOS float to a stack-slot, and pop FPU-stack
2416 enc_class Pop_Mem_FPR( stackSlotF dst ) %{ // FSTP_S [ESP+dst]
2417 store_to_stackslot( cbuf, 0xD9, 0x03, $dst$$disp );
2418 %}
2420 // Same as Pop_Mem_F except for opcode
2421 // Push FPU's TOS double to a stack-slot, and pop FPU-stack
2422 enc_class Pop_Mem_DPR( stackSlotD dst ) %{ // FSTP_D [ESP+dst]
2423 store_to_stackslot( cbuf, 0xDD, 0x03, $dst$$disp );
2424 %}
2426 enc_class Pop_Reg_FPR( regFPR dst ) %{
2427 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2428 emit_d8( cbuf, 0xD8+$dst$$reg );
2429 %}
2431 enc_class Push_Reg_FPR( regFPR dst ) %{
2432 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2433 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2434 %}
2436 // Push FPU's float to a stack-slot, and pop FPU-stack
2437 enc_class Pop_Mem_Reg_FPR( stackSlotF dst, regFPR src ) %{
2438 int pop = 0x02;
2439 if ($src$$reg != FPR1L_enc) {
2440 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2441 emit_d8( cbuf, 0xC0-1+$src$$reg );
2442 pop = 0x03;
2443 }
2444 store_to_stackslot( cbuf, 0xD9, pop, $dst$$disp ); // FST<P>_S [ESP+dst]
2445 %}
2447 // Push FPU's double to a stack-slot, and pop FPU-stack
2448 enc_class Pop_Mem_Reg_DPR( stackSlotD dst, regDPR src ) %{
2449 int pop = 0x02;
2450 if ($src$$reg != FPR1L_enc) {
2451 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2452 emit_d8( cbuf, 0xC0-1+$src$$reg );
2453 pop = 0x03;
2454 }
2455 store_to_stackslot( cbuf, 0xDD, pop, $dst$$disp ); // FST<P>_D [ESP+dst]
2456 %}
2458 // Push FPU's double to a FPU-stack-slot, and pop FPU-stack
2459 enc_class Pop_Reg_Reg_DPR( regDPR dst, regFPR src ) %{
2460 int pop = 0xD0 - 1; // -1 since we skip FLD
2461 if ($src$$reg != FPR1L_enc) {
2462 emit_opcode( cbuf, 0xD9 ); // FLD ST(src-1)
2463 emit_d8( cbuf, 0xC0-1+$src$$reg );
2464 pop = 0xD8;
2465 }
2466 emit_opcode( cbuf, 0xDD );
2467 emit_d8( cbuf, pop+$dst$$reg ); // FST<P> ST(i)
2468 %}
2471 enc_class Push_Reg_Mod_DPR( regDPR dst, regDPR src) %{
2472 // load dst in FPR0
2473 emit_opcode( cbuf, 0xD9 );
2474 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2475 if ($src$$reg != FPR1L_enc) {
2476 // fincstp
2477 emit_opcode (cbuf, 0xD9);
2478 emit_opcode (cbuf, 0xF7);
2479 // swap src with FPR1:
2480 // FXCH FPR1 with src
2481 emit_opcode(cbuf, 0xD9);
2482 emit_d8(cbuf, 0xC8-1+$src$$reg );
2483 // fdecstp
2484 emit_opcode (cbuf, 0xD9);
2485 emit_opcode (cbuf, 0xF6);
2486 }
2487 %}
2489 enc_class Push_ModD_encoding(regD src0, regD src1) %{
2490 MacroAssembler _masm(&cbuf);
2491 __ subptr(rsp, 8);
2492 __ movdbl(Address(rsp, 0), $src1$$XMMRegister);
2493 __ fld_d(Address(rsp, 0));
2494 __ movdbl(Address(rsp, 0), $src0$$XMMRegister);
2495 __ fld_d(Address(rsp, 0));
2496 %}
2498 enc_class Push_ModF_encoding(regF src0, regF src1) %{
2499 MacroAssembler _masm(&cbuf);
2500 __ subptr(rsp, 4);
2501 __ movflt(Address(rsp, 0), $src1$$XMMRegister);
2502 __ fld_s(Address(rsp, 0));
2503 __ movflt(Address(rsp, 0), $src0$$XMMRegister);
2504 __ fld_s(Address(rsp, 0));
2505 %}
2507 enc_class Push_ResultD(regD dst) %{
2508 MacroAssembler _masm(&cbuf);
2509 __ fstp_d(Address(rsp, 0));
2510 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
2511 __ addptr(rsp, 8);
2512 %}
2514 enc_class Push_ResultF(regF dst, immI d8) %{
2515 MacroAssembler _masm(&cbuf);
2516 __ fstp_s(Address(rsp, 0));
2517 __ movflt($dst$$XMMRegister, Address(rsp, 0));
2518 __ addptr(rsp, $d8$$constant);
2519 %}
2521 enc_class Push_SrcD(regD src) %{
2522 MacroAssembler _masm(&cbuf);
2523 __ subptr(rsp, 8);
2524 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
2525 __ fld_d(Address(rsp, 0));
2526 %}
2528 enc_class push_stack_temp_qword() %{
2529 MacroAssembler _masm(&cbuf);
2530 __ subptr(rsp, 8);
2531 %}
2533 enc_class pop_stack_temp_qword() %{
2534 MacroAssembler _masm(&cbuf);
2535 __ addptr(rsp, 8);
2536 %}
2538 enc_class push_xmm_to_fpr1(regD src) %{
2539 MacroAssembler _masm(&cbuf);
2540 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
2541 __ fld_d(Address(rsp, 0));
2542 %}
2544 enc_class Push_Result_Mod_DPR( regDPR src) %{
2545 if ($src$$reg != FPR1L_enc) {
2546 // fincstp
2547 emit_opcode (cbuf, 0xD9);
2548 emit_opcode (cbuf, 0xF7);
2549 // FXCH FPR1 with src
2550 emit_opcode(cbuf, 0xD9);
2551 emit_d8(cbuf, 0xC8-1+$src$$reg );
2552 // fdecstp
2553 emit_opcode (cbuf, 0xD9);
2554 emit_opcode (cbuf, 0xF6);
2555 }
2556 // // following asm replaced with Pop_Reg_F or Pop_Mem_F
2557 // // FSTP FPR$dst$$reg
2558 // emit_opcode( cbuf, 0xDD );
2559 // emit_d8( cbuf, 0xD8+$dst$$reg );
2560 %}
2562 enc_class fnstsw_sahf_skip_parity() %{
2563 // fnstsw ax
2564 emit_opcode( cbuf, 0xDF );
2565 emit_opcode( cbuf, 0xE0 );
2566 // sahf
2567 emit_opcode( cbuf, 0x9E );
2568 // jnp ::skip
2569 emit_opcode( cbuf, 0x7B );
2570 emit_opcode( cbuf, 0x05 );
2571 %}
2573 enc_class emitModDPR() %{
2574 // fprem must be iterative
2575 // :: loop
2576 // fprem
2577 emit_opcode( cbuf, 0xD9 );
2578 emit_opcode( cbuf, 0xF8 );
2579 // wait
2580 emit_opcode( cbuf, 0x9b );
2581 // fnstsw ax
2582 emit_opcode( cbuf, 0xDF );
2583 emit_opcode( cbuf, 0xE0 );
2584 // sahf
2585 emit_opcode( cbuf, 0x9E );
2586 // jp ::loop
2587 emit_opcode( cbuf, 0x0F );
2588 emit_opcode( cbuf, 0x8A );
2589 emit_opcode( cbuf, 0xF4 );
2590 emit_opcode( cbuf, 0xFF );
2591 emit_opcode( cbuf, 0xFF );
2592 emit_opcode( cbuf, 0xFF );
2593 %}
2595 enc_class fpu_flags() %{
2596 // fnstsw_ax
2597 emit_opcode( cbuf, 0xDF);
2598 emit_opcode( cbuf, 0xE0);
2599 // test ax,0x0400
2600 emit_opcode( cbuf, 0x66 ); // operand-size prefix for 16-bit immediate
2601 emit_opcode( cbuf, 0xA9 );
2602 emit_d16 ( cbuf, 0x0400 );
2603 // // // This sequence works, but stalls for 12-16 cycles on PPro
2604 // // test rax,0x0400
2605 // emit_opcode( cbuf, 0xA9 );
2606 // emit_d32 ( cbuf, 0x00000400 );
2607 //
2608 // jz exit (no unordered comparison)
2609 emit_opcode( cbuf, 0x74 );
2610 emit_d8 ( cbuf, 0x02 );
2611 // mov ah,1 - treat as LT case (set carry flag)
2612 emit_opcode( cbuf, 0xB4 );
2613 emit_d8 ( cbuf, 0x01 );
2614 // sahf
2615 emit_opcode( cbuf, 0x9E);
2616 %}
2618 enc_class cmpF_P6_fixup() %{
2619 // Fixup the integer flags in case comparison involved a NaN
2620 //
2621 // JNP exit (no unordered comparison, P-flag is set by NaN)
2622 emit_opcode( cbuf, 0x7B );
2623 emit_d8 ( cbuf, 0x03 );
2624 // MOV AH,1 - treat as LT case (set carry flag)
2625 emit_opcode( cbuf, 0xB4 );
2626 emit_d8 ( cbuf, 0x01 );
2627 // SAHF
2628 emit_opcode( cbuf, 0x9E);
2629 // NOP // target for branch to avoid branch to branch
2630 emit_opcode( cbuf, 0x90);
2631 %}
2633 // fnstsw_ax();
2634 // sahf();
2635 // movl(dst, nan_result);
2636 // jcc(Assembler::parity, exit);
2637 // movl(dst, less_result);
2638 // jcc(Assembler::below, exit);
2639 // movl(dst, equal_result);
2640 // jcc(Assembler::equal, exit);
2641 // movl(dst, greater_result);
2643 // less_result = 1;
2644 // greater_result = -1;
2645 // equal_result = 0;
2646 // nan_result = -1;
2648 enc_class CmpF_Result(rRegI dst) %{
2649 // fnstsw_ax();
2650 emit_opcode( cbuf, 0xDF);
2651 emit_opcode( cbuf, 0xE0);
2652 // sahf
2653 emit_opcode( cbuf, 0x9E);
2654 // movl(dst, nan_result);
2655 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2656 emit_d32( cbuf, -1 );
2657 // jcc(Assembler::parity, exit);
2658 emit_opcode( cbuf, 0x7A );
2659 emit_d8 ( cbuf, 0x13 );
2660 // movl(dst, less_result);
2661 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2662 emit_d32( cbuf, -1 );
2663 // jcc(Assembler::below, exit);
2664 emit_opcode( cbuf, 0x72 );
2665 emit_d8 ( cbuf, 0x0C );
2666 // movl(dst, equal_result);
2667 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2668 emit_d32( cbuf, 0 );
2669 // jcc(Assembler::equal, exit);
2670 emit_opcode( cbuf, 0x74 );
2671 emit_d8 ( cbuf, 0x05 );
2672 // movl(dst, greater_result);
2673 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2674 emit_d32( cbuf, 1 );
2675 %}
2678 // Compare the longs and set flags
2679 // BROKEN! Do Not use as-is
2680 enc_class cmpl_test( eRegL src1, eRegL src2 ) %{
2681 // CMP $src1.hi,$src2.hi
2682 emit_opcode( cbuf, 0x3B );
2683 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2684 // JNE,s done
2685 emit_opcode(cbuf,0x75);
2686 emit_d8(cbuf, 2 );
2687 // CMP $src1.lo,$src2.lo
2688 emit_opcode( cbuf, 0x3B );
2689 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2690 // done:
2691 %}
2693 enc_class convert_int_long( regL dst, rRegI src ) %{
2694 // mov $dst.lo,$src
2695 int dst_encoding = $dst$$reg;
2696 int src_encoding = $src$$reg;
2697 encode_Copy( cbuf, dst_encoding , src_encoding );
2698 // mov $dst.hi,$src
2699 encode_Copy( cbuf, HIGH_FROM_LOW(dst_encoding), src_encoding );
2700 // sar $dst.hi,31
2701 emit_opcode( cbuf, 0xC1 );
2702 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW(dst_encoding) );
2703 emit_d8(cbuf, 0x1F );
2704 %}
2706 enc_class convert_long_double( eRegL src ) %{
2707 // push $src.hi
2708 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
2709 // push $src.lo
2710 emit_opcode(cbuf, 0x50+$src$$reg );
2711 // fild 64-bits at [SP]
2712 emit_opcode(cbuf,0xdf);
2713 emit_d8(cbuf, 0x6C);
2714 emit_d8(cbuf, 0x24);
2715 emit_d8(cbuf, 0x00);
2716 // pop stack
2717 emit_opcode(cbuf, 0x83); // add SP, #8
2718 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2719 emit_d8(cbuf, 0x8);
2720 %}
2722 enc_class multiply_con_and_shift_high( eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr ) %{
2723 // IMUL EDX:EAX,$src1
2724 emit_opcode( cbuf, 0xF7 );
2725 emit_rm( cbuf, 0x3, 0x5, $src1$$reg );
2726 // SAR EDX,$cnt-32
2727 int shift_count = ((int)$cnt$$constant) - 32;
2728 if (shift_count > 0) {
2729 emit_opcode(cbuf, 0xC1);
2730 emit_rm(cbuf, 0x3, 7, $dst$$reg );
2731 emit_d8(cbuf, shift_count);
2732 }
2733 %}
2735 // this version doesn't have add sp, 8
2736 enc_class convert_long_double2( eRegL src ) %{
2737 // push $src.hi
2738 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
2739 // push $src.lo
2740 emit_opcode(cbuf, 0x50+$src$$reg );
2741 // fild 64-bits at [SP]
2742 emit_opcode(cbuf,0xdf);
2743 emit_d8(cbuf, 0x6C);
2744 emit_d8(cbuf, 0x24);
2745 emit_d8(cbuf, 0x00);
2746 %}
2748 enc_class long_int_multiply( eADXRegL dst, nadxRegI src) %{
2749 // Basic idea: long = (long)int * (long)int
2750 // IMUL EDX:EAX, src
2751 emit_opcode( cbuf, 0xF7 );
2752 emit_rm( cbuf, 0x3, 0x5, $src$$reg);
2753 %}
2755 enc_class long_uint_multiply( eADXRegL dst, nadxRegI src) %{
2756 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
2757 // MUL EDX:EAX, src
2758 emit_opcode( cbuf, 0xF7 );
2759 emit_rm( cbuf, 0x3, 0x4, $src$$reg);
2760 %}
2762 enc_class long_multiply( eADXRegL dst, eRegL src, rRegI tmp ) %{
2763 // Basic idea: lo(result) = lo(x_lo * y_lo)
2764 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
2765 // MOV $tmp,$src.lo
2766 encode_Copy( cbuf, $tmp$$reg, $src$$reg );
2767 // IMUL $tmp,EDX
2768 emit_opcode( cbuf, 0x0F );
2769 emit_opcode( cbuf, 0xAF );
2770 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2771 // MOV EDX,$src.hi
2772 encode_Copy( cbuf, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg) );
2773 // IMUL EDX,EAX
2774 emit_opcode( cbuf, 0x0F );
2775 emit_opcode( cbuf, 0xAF );
2776 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2777 // ADD $tmp,EDX
2778 emit_opcode( cbuf, 0x03 );
2779 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2780 // MUL EDX:EAX,$src.lo
2781 emit_opcode( cbuf, 0xF7 );
2782 emit_rm( cbuf, 0x3, 0x4, $src$$reg );
2783 // ADD EDX,ESI
2784 emit_opcode( cbuf, 0x03 );
2785 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $tmp$$reg );
2786 %}
2788 enc_class long_multiply_con( eADXRegL dst, immL_127 src, rRegI tmp ) %{
2789 // Basic idea: lo(result) = lo(src * y_lo)
2790 // hi(result) = hi(src * y_lo) + lo(src * y_hi)
2791 // IMUL $tmp,EDX,$src
2792 emit_opcode( cbuf, 0x6B );
2793 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2794 emit_d8( cbuf, (int)$src$$constant );
2795 // MOV EDX,$src
2796 emit_opcode(cbuf, 0xB8 + EDX_enc);
2797 emit_d32( cbuf, (int)$src$$constant );
2798 // MUL EDX:EAX,EDX
2799 emit_opcode( cbuf, 0xF7 );
2800 emit_rm( cbuf, 0x3, 0x4, EDX_enc );
2801 // ADD EDX,ESI
2802 emit_opcode( cbuf, 0x03 );
2803 emit_rm( cbuf, 0x3, EDX_enc, $tmp$$reg );
2804 %}
2806 enc_class long_div( eRegL src1, eRegL src2 ) %{
2807 // PUSH src1.hi
2808 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
2809 // PUSH src1.lo
2810 emit_opcode(cbuf, 0x50+$src1$$reg );
2811 // PUSH src2.hi
2812 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
2813 // PUSH src2.lo
2814 emit_opcode(cbuf, 0x50+$src2$$reg );
2815 // CALL directly to the runtime
2816 cbuf.set_insts_mark();
2817 emit_opcode(cbuf,0xE8); // Call into runtime
2818 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::ldiv) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
2819 // Restore stack
2820 emit_opcode(cbuf, 0x83); // add SP, #framesize
2821 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2822 emit_d8(cbuf, 4*4);
2823 %}
2825 enc_class long_mod( eRegL src1, eRegL src2 ) %{
2826 // PUSH src1.hi
2827 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
2828 // PUSH src1.lo
2829 emit_opcode(cbuf, 0x50+$src1$$reg );
2830 // PUSH src2.hi
2831 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
2832 // PUSH src2.lo
2833 emit_opcode(cbuf, 0x50+$src2$$reg );
2834 // CALL directly to the runtime
2835 cbuf.set_insts_mark();
2836 emit_opcode(cbuf,0xE8); // Call into runtime
2837 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::lrem ) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
2838 // Restore stack
2839 emit_opcode(cbuf, 0x83); // add SP, #framesize
2840 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2841 emit_d8(cbuf, 4*4);
2842 %}
2844 enc_class long_cmp_flags0( eRegL src, rRegI tmp ) %{
2845 // MOV $tmp,$src.lo
2846 emit_opcode(cbuf, 0x8B);
2847 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
2848 // OR $tmp,$src.hi
2849 emit_opcode(cbuf, 0x0B);
2850 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
2851 %}
2853 enc_class long_cmp_flags1( eRegL src1, eRegL src2 ) %{
2854 // CMP $src1.lo,$src2.lo
2855 emit_opcode( cbuf, 0x3B );
2856 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2857 // JNE,s skip
2858 emit_cc(cbuf, 0x70, 0x5);
2859 emit_d8(cbuf,2);
2860 // CMP $src1.hi,$src2.hi
2861 emit_opcode( cbuf, 0x3B );
2862 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2863 %}
2865 enc_class long_cmp_flags2( eRegL src1, eRegL src2, rRegI tmp ) %{
2866 // CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits
2867 emit_opcode( cbuf, 0x3B );
2868 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2869 // MOV $tmp,$src1.hi
2870 emit_opcode( cbuf, 0x8B );
2871 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src1$$reg) );
2872 // SBB $tmp,$src2.hi\t! Compute flags for long compare
2873 emit_opcode( cbuf, 0x1B );
2874 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src2$$reg) );
2875 %}
2877 enc_class long_cmp_flags3( eRegL src, rRegI tmp ) %{
2878 // XOR $tmp,$tmp
2879 emit_opcode(cbuf,0x33); // XOR
2880 emit_rm(cbuf,0x3, $tmp$$reg, $tmp$$reg);
2881 // CMP $tmp,$src.lo
2882 emit_opcode( cbuf, 0x3B );
2883 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg );
2884 // SBB $tmp,$src.hi
2885 emit_opcode( cbuf, 0x1B );
2886 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg) );
2887 %}
2889 // Sniff, sniff... smells like Gnu Superoptimizer
2890 enc_class neg_long( eRegL dst ) %{
2891 emit_opcode(cbuf,0xF7); // NEG hi
2892 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
2893 emit_opcode(cbuf,0xF7); // NEG lo
2894 emit_rm (cbuf,0x3, 0x3, $dst$$reg );
2895 emit_opcode(cbuf,0x83); // SBB hi,0
2896 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
2897 emit_d8 (cbuf,0 );
2898 %}
2901 // Because the transitions from emitted code to the runtime
2902 // monitorenter/exit helper stubs are so slow it's critical that
2903 // we inline both the stack-locking fast-path and the inflated fast path.
2904 //
2905 // See also: cmpFastLock and cmpFastUnlock.
2906 //
2907 // What follows is a specialized inline transliteration of the code
2908 // in slow_enter() and slow_exit(). If we're concerned about I$ bloat
2909 // another option would be to emit TrySlowEnter and TrySlowExit methods
2910 // at startup-time. These methods would accept arguments as
2911 // (rax,=Obj, rbx=Self, rcx=box, rdx=Scratch) and return success-failure
2912 // indications in the icc.ZFlag. Fast_Lock and Fast_Unlock would simply
2913 // marshal the arguments and emit calls to TrySlowEnter and TrySlowExit.
2914 // In practice, however, the # of lock sites is bounded and is usually small.
2915 // Besides the call overhead, TrySlowEnter and TrySlowExit might suffer
2916 // if the processor uses simple bimodal branch predictors keyed by EIP
2917 // Since the helper routines would be called from multiple synchronization
2918 // sites.
2919 //
2920 // An even better approach would be write "MonitorEnter()" and "MonitorExit()"
2921 // in java - using j.u.c and unsafe - and just bind the lock and unlock sites
2922 // to those specialized methods. That'd give us a mostly platform-independent
2923 // implementation that the JITs could optimize and inline at their pleasure.
2924 // Done correctly, the only time we'd need to cross to native could would be
2925 // to park() or unpark() threads. We'd also need a few more unsafe operators
2926 // to (a) prevent compiler-JIT reordering of non-volatile accesses, and
2927 // (b) explicit barriers or fence operations.
2928 //
2929 // TODO:
2930 //
2931 // * Arrange for C2 to pass "Self" into Fast_Lock and Fast_Unlock in one of the registers (scr).
2932 // This avoids manifesting the Self pointer in the Fast_Lock and Fast_Unlock terminals.
2933 // Given TLAB allocation, Self is usually manifested in a register, so passing it into
2934 // the lock operators would typically be faster than reifying Self.
2935 //
2936 // * Ideally I'd define the primitives as:
2937 // fast_lock (nax Obj, nax box, EAX tmp, nax scr) where box, tmp and scr are KILLED.
2938 // fast_unlock (nax Obj, EAX box, nax tmp) where box and tmp are KILLED
2939 // Unfortunately ADLC bugs prevent us from expressing the ideal form.
2940 // Instead, we're stuck with a rather awkward and brittle register assignments below.
2941 // Furthermore the register assignments are overconstrained, possibly resulting in
2942 // sub-optimal code near the synchronization site.
2943 //
2944 // * Eliminate the sp-proximity tests and just use "== Self" tests instead.
2945 // Alternately, use a better sp-proximity test.
2946 //
2947 // * Currently ObjectMonitor._Owner can hold either an sp value or a (THREAD *) value.
2948 // Either one is sufficient to uniquely identify a thread.
2949 // TODO: eliminate use of sp in _owner and use get_thread(tr) instead.
2950 //
2951 // * Intrinsify notify() and notifyAll() for the common cases where the
2952 // object is locked by the calling thread but the waitlist is empty.
2953 // avoid the expensive JNI call to JVM_Notify() and JVM_NotifyAll().
2954 //
2955 // * use jccb and jmpb instead of jcc and jmp to improve code density.
2956 // But beware of excessive branch density on AMD Opterons.
2957 //
2958 // * Both Fast_Lock and Fast_Unlock set the ICC.ZF to indicate success
2959 // or failure of the fast-path. If the fast-path fails then we pass
2960 // control to the slow-path, typically in C. In Fast_Lock and
2961 // Fast_Unlock we often branch to DONE_LABEL, just to find that C2
2962 // will emit a conditional branch immediately after the node.
2963 // So we have branches to branches and lots of ICC.ZF games.
2964 // Instead, it might be better to have C2 pass a "FailureLabel"
2965 // into Fast_Lock and Fast_Unlock. In the case of success, control
2966 // will drop through the node. ICC.ZF is undefined at exit.
2967 // In the case of failure, the node will branch directly to the
2968 // FailureLabel
2971 // obj: object to lock
2972 // box: on-stack box address (displaced header location) - KILLED
2973 // rax,: tmp -- KILLED
2974 // scr: tmp -- KILLED
2975 enc_class Fast_Lock( eRegP obj, eRegP box, eAXRegI tmp, eRegP scr ) %{
2977 Register objReg = as_Register($obj$$reg);
2978 Register boxReg = as_Register($box$$reg);
2979 Register tmpReg = as_Register($tmp$$reg);
2980 Register scrReg = as_Register($scr$$reg);
2982 // Ensure the register assignents are disjoint
2983 guarantee (objReg != boxReg, "") ;
2984 guarantee (objReg != tmpReg, "") ;
2985 guarantee (objReg != scrReg, "") ;
2986 guarantee (boxReg != tmpReg, "") ;
2987 guarantee (boxReg != scrReg, "") ;
2988 guarantee (tmpReg == as_Register(EAX_enc), "") ;
2990 MacroAssembler masm(&cbuf);
2992 if (_counters != NULL) {
2993 masm.atomic_incl(ExternalAddress((address) _counters->total_entry_count_addr()));
2994 }
2995 if (EmitSync & 1) {
2996 // set box->dhw = unused_mark (3)
2997 // Force all sync thru slow-path: slow_enter() and slow_exit()
2998 masm.movptr (Address(boxReg, 0), int32_t(markOopDesc::unused_mark())) ;
2999 masm.cmpptr (rsp, (int32_t)0) ;
3000 } else
3001 if (EmitSync & 2) {
3002 Label DONE_LABEL ;
3003 if (UseBiasedLocking) {
3004 // Note: tmpReg maps to the swap_reg argument and scrReg to the tmp_reg argument.
3005 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3006 }
3008 masm.movptr(tmpReg, Address(objReg, 0)) ; // fetch markword
3009 masm.orptr (tmpReg, 0x1);
3010 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3011 if (os::is_MP()) { masm.lock(); }
3012 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3013 masm.jcc(Assembler::equal, DONE_LABEL);
3014 // Recursive locking
3015 masm.subptr(tmpReg, rsp);
3016 masm.andptr(tmpReg, (int32_t) 0xFFFFF003 );
3017 masm.movptr(Address(boxReg, 0), tmpReg);
3018 masm.bind(DONE_LABEL) ;
3019 } else {
3020 // Possible cases that we'll encounter in fast_lock
3021 // ------------------------------------------------
3022 // * Inflated
3023 // -- unlocked
3024 // -- Locked
3025 // = by self
3026 // = by other
3027 // * biased
3028 // -- by Self
3029 // -- by other
3030 // * neutral
3031 // * stack-locked
3032 // -- by self
3033 // = sp-proximity test hits
3034 // = sp-proximity test generates false-negative
3035 // -- by other
3036 //
3038 Label IsInflated, DONE_LABEL, PopDone ;
3040 // TODO: optimize away redundant LDs of obj->mark and improve the markword triage
3041 // order to reduce the number of conditional branches in the most common cases.
3042 // Beware -- there's a subtle invariant that fetch of the markword
3043 // at [FETCH], below, will never observe a biased encoding (*101b).
3044 // If this invariant is not held we risk exclusion (safety) failure.
3045 if (UseBiasedLocking && !UseOptoBiasInlining) {
3046 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3047 }
3049 masm.movptr(tmpReg, Address(objReg, 0)) ; // [FETCH]
3050 masm.testptr(tmpReg, 0x02) ; // Inflated v (Stack-locked or neutral)
3051 masm.jccb (Assembler::notZero, IsInflated) ;
3053 // Attempt stack-locking ...
3054 masm.orptr (tmpReg, 0x1);
3055 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3056 if (os::is_MP()) { masm.lock(); }
3057 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3058 if (_counters != NULL) {
3059 masm.cond_inc32(Assembler::equal,
3060 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3061 }
3062 masm.jccb (Assembler::equal, DONE_LABEL);
3064 // Recursive locking
3065 masm.subptr(tmpReg, rsp);
3066 masm.andptr(tmpReg, 0xFFFFF003 );
3067 masm.movptr(Address(boxReg, 0), tmpReg);
3068 if (_counters != NULL) {
3069 masm.cond_inc32(Assembler::equal,
3070 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3071 }
3072 masm.jmp (DONE_LABEL) ;
3074 masm.bind (IsInflated) ;
3076 // The object is inflated.
3077 //
3078 // TODO-FIXME: eliminate the ugly use of manifest constants:
3079 // Use markOopDesc::monitor_value instead of "2".
3080 // use markOop::unused_mark() instead of "3".
3081 // The tmpReg value is an objectMonitor reference ORed with
3082 // markOopDesc::monitor_value (2). We can either convert tmpReg to an
3083 // objectmonitor pointer by masking off the "2" bit or we can just
3084 // use tmpReg as an objectmonitor pointer but bias the objectmonitor
3085 // field offsets with "-2" to compensate for and annul the low-order tag bit.
3086 //
3087 // I use the latter as it avoids AGI stalls.
3088 // As such, we write "mov r, [tmpReg+OFFSETOF(Owner)-2]"
3089 // instead of "mov r, [tmpReg+OFFSETOF(Owner)]".
3090 //
3091 #define OFFSET_SKEWED(f) ((ObjectMonitor::f ## _offset_in_bytes())-2)
3093 // boxReg refers to the on-stack BasicLock in the current frame.
3094 // We'd like to write:
3095 // set box->_displaced_header = markOop::unused_mark(). Any non-0 value suffices.
3096 // This is convenient but results a ST-before-CAS penalty. The following CAS suffers
3097 // additional latency as we have another ST in the store buffer that must drain.
3099 if (EmitSync & 8192) {
3100 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3101 masm.get_thread (scrReg) ;
3102 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3103 masm.movptr(tmpReg, NULL_WORD); // consider: xor vs mov
3104 if (os::is_MP()) { masm.lock(); }
3105 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3106 } else
3107 if ((EmitSync & 128) == 0) { // avoid ST-before-CAS
3108 masm.movptr(scrReg, boxReg) ;
3109 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3111 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3112 if ((EmitSync & 2048) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3113 // prefetchw [eax + Offset(_owner)-2]
3114 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3115 }
3117 if ((EmitSync & 64) == 0) {
3118 // Optimistic form: consider XORL tmpReg,tmpReg
3119 masm.movptr(tmpReg, NULL_WORD) ;
3120 } else {
3121 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3122 // Test-And-CAS instead of CAS
3123 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3124 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3125 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3126 }
3128 // Appears unlocked - try to swing _owner from null to non-null.
3129 // Ideally, I'd manifest "Self" with get_thread and then attempt
3130 // to CAS the register containing Self into m->Owner.
3131 // But we don't have enough registers, so instead we can either try to CAS
3132 // rsp or the address of the box (in scr) into &m->owner. If the CAS succeeds
3133 // we later store "Self" into m->Owner. Transiently storing a stack address
3134 // (rsp or the address of the box) into m->owner is harmless.
3135 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3136 if (os::is_MP()) { masm.lock(); }
3137 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3138 masm.movptr(Address(scrReg, 0), 3) ; // box->_displaced_header = 3
3139 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3140 masm.get_thread (scrReg) ; // beware: clobbers ICCs
3141 masm.movptr(Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2), scrReg) ;
3142 masm.xorptr(boxReg, boxReg) ; // set icc.ZFlag = 1 to indicate success
3144 // If the CAS fails we can either retry or pass control to the slow-path.
3145 // We use the latter tactic.
3146 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3147 // If the CAS was successful ...
3148 // Self has acquired the lock
3149 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3150 // Intentional fall-through into DONE_LABEL ...
3151 } else {
3152 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3153 masm.movptr(boxReg, tmpReg) ;
3155 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3156 if ((EmitSync & 2048) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3157 // prefetchw [eax + Offset(_owner)-2]
3158 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3159 }
3161 if ((EmitSync & 64) == 0) {
3162 // Optimistic form
3163 masm.xorptr (tmpReg, tmpReg) ;
3164 } else {
3165 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3166 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3167 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3168 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3169 }
3171 // Appears unlocked - try to swing _owner from null to non-null.
3172 // Use either "Self" (in scr) or rsp as thread identity in _owner.
3173 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3174 masm.get_thread (scrReg) ;
3175 if (os::is_MP()) { masm.lock(); }
3176 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3178 // If the CAS fails we can either retry or pass control to the slow-path.
3179 // We use the latter tactic.
3180 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3181 // If the CAS was successful ...
3182 // Self has acquired the lock
3183 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3184 // Intentional fall-through into DONE_LABEL ...
3185 }
3187 // DONE_LABEL is a hot target - we'd really like to place it at the
3188 // start of cache line by padding with NOPs.
3189 // See the AMD and Intel software optimization manuals for the
3190 // most efficient "long" NOP encodings.
3191 // Unfortunately none of our alignment mechanisms suffice.
3192 masm.bind(DONE_LABEL);
3194 // Avoid branch-to-branch on AMD processors
3195 // This appears to be superstition.
3196 if (EmitSync & 32) masm.nop() ;
3199 // At DONE_LABEL the icc ZFlag is set as follows ...
3200 // Fast_Unlock uses the same protocol.
3201 // ZFlag == 1 -> Success
3202 // ZFlag == 0 -> Failure - force control through the slow-path
3203 }
3204 %}
3206 // obj: object to unlock
3207 // box: box address (displaced header location), killed. Must be EAX.
3208 // rbx,: killed tmp; cannot be obj nor box.
3209 //
3210 // Some commentary on balanced locking:
3211 //
3212 // Fast_Lock and Fast_Unlock are emitted only for provably balanced lock sites.
3213 // Methods that don't have provably balanced locking are forced to run in the
3214 // interpreter - such methods won't be compiled to use fast_lock and fast_unlock.
3215 // The interpreter provides two properties:
3216 // I1: At return-time the interpreter automatically and quietly unlocks any
3217 // objects acquired the current activation (frame). Recall that the
3218 // interpreter maintains an on-stack list of locks currently held by
3219 // a frame.
3220 // I2: If a method attempts to unlock an object that is not held by the
3221 // the frame the interpreter throws IMSX.
3222 //
3223 // Lets say A(), which has provably balanced locking, acquires O and then calls B().
3224 // B() doesn't have provably balanced locking so it runs in the interpreter.
3225 // Control returns to A() and A() unlocks O. By I1 and I2, above, we know that O
3226 // is still locked by A().
3227 //
3228 // The only other source of unbalanced locking would be JNI. The "Java Native Interface:
3229 // Programmer's Guide and Specification" claims that an object locked by jni_monitorenter
3230 // should not be unlocked by "normal" java-level locking and vice-versa. The specification
3231 // doesn't specify what will occur if a program engages in such mixed-mode locking, however.
3233 enc_class Fast_Unlock( nabxRegP obj, eAXRegP box, eRegP tmp) %{
3235 Register objReg = as_Register($obj$$reg);
3236 Register boxReg = as_Register($box$$reg);
3237 Register tmpReg = as_Register($tmp$$reg);
3239 guarantee (objReg != boxReg, "") ;
3240 guarantee (objReg != tmpReg, "") ;
3241 guarantee (boxReg != tmpReg, "") ;
3242 guarantee (boxReg == as_Register(EAX_enc), "") ;
3243 MacroAssembler masm(&cbuf);
3245 if (EmitSync & 4) {
3246 // Disable - inhibit all inlining. Force control through the slow-path
3247 masm.cmpptr (rsp, 0) ;
3248 } else
3249 if (EmitSync & 8) {
3250 Label DONE_LABEL ;
3251 if (UseBiasedLocking) {
3252 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3253 }
3254 // classic stack-locking code ...
3255 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3256 masm.testptr(tmpReg, tmpReg) ;
3257 masm.jcc (Assembler::zero, DONE_LABEL) ;
3258 if (os::is_MP()) { masm.lock(); }
3259 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3260 masm.bind(DONE_LABEL);
3261 } else {
3262 Label DONE_LABEL, Stacked, CheckSucc, Inflated ;
3264 // Critically, the biased locking test must have precedence over
3265 // and appear before the (box->dhw == 0) recursive stack-lock test.
3266 if (UseBiasedLocking && !UseOptoBiasInlining) {
3267 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3268 }
3270 masm.cmpptr(Address(boxReg, 0), 0) ; // Examine the displaced header
3271 masm.movptr(tmpReg, Address(objReg, 0)) ; // Examine the object's markword
3272 masm.jccb (Assembler::zero, DONE_LABEL) ; // 0 indicates recursive stack-lock
3274 masm.testptr(tmpReg, 0x02) ; // Inflated?
3275 masm.jccb (Assembler::zero, Stacked) ;
3277 masm.bind (Inflated) ;
3278 // It's inflated.
3279 // Despite our balanced locking property we still check that m->_owner == Self
3280 // as java routines or native JNI code called by this thread might
3281 // have released the lock.
3282 // Refer to the comments in synchronizer.cpp for how we might encode extra
3283 // state in _succ so we can avoid fetching EntryList|cxq.
3284 //
3285 // I'd like to add more cases in fast_lock() and fast_unlock() --
3286 // such as recursive enter and exit -- but we have to be wary of
3287 // I$ bloat, T$ effects and BP$ effects.
3288 //
3289 // If there's no contention try a 1-0 exit. That is, exit without
3290 // a costly MEMBAR or CAS. See synchronizer.cpp for details on how
3291 // we detect and recover from the race that the 1-0 exit admits.
3292 //
3293 // Conceptually Fast_Unlock() must execute a STST|LDST "release" barrier
3294 // before it STs null into _owner, releasing the lock. Updates
3295 // to data protected by the critical section must be visible before
3296 // we drop the lock (and thus before any other thread could acquire
3297 // the lock and observe the fields protected by the lock).
3298 // IA32's memory-model is SPO, so STs are ordered with respect to
3299 // each other and there's no need for an explicit barrier (fence).
3300 // See also http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
3302 masm.get_thread (boxReg) ;
3303 if ((EmitSync & 4096) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3304 // prefetchw [ebx + Offset(_owner)-2]
3305 masm.prefetchw(Address(rbx, ObjectMonitor::owner_offset_in_bytes()-2));
3306 }
3308 // Note that we could employ various encoding schemes to reduce
3309 // the number of loads below (currently 4) to just 2 or 3.
3310 // Refer to the comments in synchronizer.cpp.
3311 // In practice the chain of fetches doesn't seem to impact performance, however.
3312 if ((EmitSync & 65536) == 0 && (EmitSync & 256)) {
3313 // Attempt to reduce branch density - AMD's branch predictor.
3314 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3315 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3316 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3317 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3318 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3319 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3320 masm.jmpb (DONE_LABEL) ;
3321 } else {
3322 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3323 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3324 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3325 masm.movptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3326 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3327 masm.jccb (Assembler::notZero, CheckSucc) ;
3328 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3329 masm.jmpb (DONE_LABEL) ;
3330 }
3332 // The Following code fragment (EmitSync & 65536) improves the performance of
3333 // contended applications and contended synchronization microbenchmarks.
3334 // Unfortunately the emission of the code - even though not executed - causes regressions
3335 // in scimark and jetstream, evidently because of $ effects. Replacing the code
3336 // with an equal number of never-executed NOPs results in the same regression.
3337 // We leave it off by default.
3339 if ((EmitSync & 65536) != 0) {
3340 Label LSuccess, LGoSlowPath ;
3342 masm.bind (CheckSucc) ;
3344 // Optional pre-test ... it's safe to elide this
3345 if ((EmitSync & 16) == 0) {
3346 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3347 masm.jccb (Assembler::zero, LGoSlowPath) ;
3348 }
3350 // We have a classic Dekker-style idiom:
3351 // ST m->_owner = 0 ; MEMBAR; LD m->_succ
3352 // There are a number of ways to implement the barrier:
3353 // (1) lock:andl &m->_owner, 0
3354 // is fast, but mask doesn't currently support the "ANDL M,IMM32" form.
3355 // LOCK: ANDL [ebx+Offset(_Owner)-2], 0
3356 // Encodes as 81 31 OFF32 IMM32 or 83 63 OFF8 IMM8
3357 // (2) If supported, an explicit MFENCE is appealing.
3358 // In older IA32 processors MFENCE is slower than lock:add or xchg
3359 // particularly if the write-buffer is full as might be the case if
3360 // if stores closely precede the fence or fence-equivalent instruction.
3361 // In more modern implementations MFENCE appears faster, however.
3362 // (3) In lieu of an explicit fence, use lock:addl to the top-of-stack
3363 // The $lines underlying the top-of-stack should be in M-state.
3364 // The locked add instruction is serializing, of course.
3365 // (4) Use xchg, which is serializing
3366 // mov boxReg, 0; xchgl boxReg, [tmpReg + Offset(_owner)-2] also works
3367 // (5) ST m->_owner = 0 and then execute lock:orl &m->_succ, 0.
3368 // The integer condition codes will tell us if succ was 0.
3369 // Since _succ and _owner should reside in the same $line and
3370 // we just stored into _owner, it's likely that the $line
3371 // remains in M-state for the lock:orl.
3372 //
3373 // We currently use (3), although it's likely that switching to (2)
3374 // is correct for the future.
3376 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3377 if (os::is_MP()) {
3378 if (VM_Version::supports_sse2() && 1 == FenceInstruction) {
3379 masm.mfence();
3380 } else {
3381 masm.lock () ; masm.addptr(Address(rsp, 0), 0) ;
3382 }
3383 }
3384 // Ratify _succ remains non-null
3385 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3386 masm.jccb (Assembler::notZero, LSuccess) ;
3388 masm.xorptr(boxReg, boxReg) ; // box is really EAX
3389 if (os::is_MP()) { masm.lock(); }
3390 masm.cmpxchgptr(rsp, Address(tmpReg, ObjectMonitor::owner_offset_in_bytes()-2));
3391 masm.jccb (Assembler::notEqual, LSuccess) ;
3392 // Since we're low on registers we installed rsp as a placeholding in _owner.
3393 // Now install Self over rsp. This is safe as we're transitioning from
3394 // non-null to non=null
3395 masm.get_thread (boxReg) ;
3396 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), boxReg) ;
3397 // Intentional fall-through into LGoSlowPath ...
3399 masm.bind (LGoSlowPath) ;
3400 masm.orptr(boxReg, 1) ; // set ICC.ZF=0 to indicate failure
3401 masm.jmpb (DONE_LABEL) ;
3403 masm.bind (LSuccess) ;
3404 masm.xorptr(boxReg, boxReg) ; // set ICC.ZF=1 to indicate success
3405 masm.jmpb (DONE_LABEL) ;
3406 }
3408 masm.bind (Stacked) ;
3409 // It's not inflated and it's not recursively stack-locked and it's not biased.
3410 // It must be stack-locked.
3411 // Try to reset the header to displaced header.
3412 // The "box" value on the stack is stable, so we can reload
3413 // and be assured we observe the same value as above.
3414 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3415 if (os::is_MP()) { masm.lock(); }
3416 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3417 // Intention fall-thru into DONE_LABEL
3420 // DONE_LABEL is a hot target - we'd really like to place it at the
3421 // start of cache line by padding with NOPs.
3422 // See the AMD and Intel software optimization manuals for the
3423 // most efficient "long" NOP encodings.
3424 // Unfortunately none of our alignment mechanisms suffice.
3425 if ((EmitSync & 65536) == 0) {
3426 masm.bind (CheckSucc) ;
3427 }
3428 masm.bind(DONE_LABEL);
3430 // Avoid branch to branch on AMD processors
3431 if (EmitSync & 32768) { masm.nop() ; }
3432 }
3433 %}
3436 enc_class enc_pop_rdx() %{
3437 emit_opcode(cbuf,0x5A);
3438 %}
3440 enc_class enc_rethrow() %{
3441 cbuf.set_insts_mark();
3442 emit_opcode(cbuf, 0xE9); // jmp entry
3443 emit_d32_reloc(cbuf, (int)OptoRuntime::rethrow_stub() - ((int)cbuf.insts_end())-4,
3444 runtime_call_Relocation::spec(), RELOC_IMM32 );
3445 %}
3448 // Convert a double to an int. Java semantics require we do complex
3449 // manglelations in the corner cases. So we set the rounding mode to
3450 // 'zero', store the darned double down as an int, and reset the
3451 // rounding mode to 'nearest'. The hardware throws an exception which
3452 // patches up the correct value directly to the stack.
3453 enc_class DPR2I_encoding( regDPR src ) %{
3454 // Flip to round-to-zero mode. We attempted to allow invalid-op
3455 // exceptions here, so that a NAN or other corner-case value will
3456 // thrown an exception (but normal values get converted at full speed).
3457 // However, I2C adapters and other float-stack manglers leave pending
3458 // invalid-op exceptions hanging. We would have to clear them before
3459 // enabling them and that is more expensive than just testing for the
3460 // invalid value Intel stores down in the corner cases.
3461 emit_opcode(cbuf,0xD9); // FLDCW trunc
3462 emit_opcode(cbuf,0x2D);
3463 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3464 // Allocate a word
3465 emit_opcode(cbuf,0x83); // SUB ESP,4
3466 emit_opcode(cbuf,0xEC);
3467 emit_d8(cbuf,0x04);
3468 // Encoding assumes a double has been pushed into FPR0.
3469 // Store down the double as an int, popping the FPU stack
3470 emit_opcode(cbuf,0xDB); // FISTP [ESP]
3471 emit_opcode(cbuf,0x1C);
3472 emit_d8(cbuf,0x24);
3473 // Restore the rounding mode; mask the exception
3474 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3475 emit_opcode(cbuf,0x2D);
3476 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3477 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3478 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3480 // Load the converted int; adjust CPU stack
3481 emit_opcode(cbuf,0x58); // POP EAX
3482 emit_opcode(cbuf,0x3D); // CMP EAX,imm
3483 emit_d32 (cbuf,0x80000000); // 0x80000000
3484 emit_opcode(cbuf,0x75); // JNE around_slow_call
3485 emit_d8 (cbuf,0x07); // Size of slow_call
3486 // Push src onto stack slow-path
3487 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3488 emit_d8 (cbuf,0xC0-1+$src$$reg );
3489 // CALL directly to the runtime
3490 cbuf.set_insts_mark();
3491 emit_opcode(cbuf,0xE8); // Call into runtime
3492 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3493 // Carry on here...
3494 %}
3496 enc_class DPR2L_encoding( regDPR src ) %{
3497 emit_opcode(cbuf,0xD9); // FLDCW trunc
3498 emit_opcode(cbuf,0x2D);
3499 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3500 // Allocate a word
3501 emit_opcode(cbuf,0x83); // SUB ESP,8
3502 emit_opcode(cbuf,0xEC);
3503 emit_d8(cbuf,0x08);
3504 // Encoding assumes a double has been pushed into FPR0.
3505 // Store down the double as a long, popping the FPU stack
3506 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3507 emit_opcode(cbuf,0x3C);
3508 emit_d8(cbuf,0x24);
3509 // Restore the rounding mode; mask the exception
3510 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3511 emit_opcode(cbuf,0x2D);
3512 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3513 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3514 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3516 // Load the converted int; adjust CPU stack
3517 emit_opcode(cbuf,0x58); // POP EAX
3518 emit_opcode(cbuf,0x5A); // POP EDX
3519 emit_opcode(cbuf,0x81); // CMP EDX,imm
3520 emit_d8 (cbuf,0xFA); // rdx
3521 emit_d32 (cbuf,0x80000000); // 0x80000000
3522 emit_opcode(cbuf,0x75); // JNE around_slow_call
3523 emit_d8 (cbuf,0x07+4); // Size of slow_call
3524 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3525 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3526 emit_opcode(cbuf,0x75); // JNE around_slow_call
3527 emit_d8 (cbuf,0x07); // Size of slow_call
3528 // Push src onto stack slow-path
3529 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3530 emit_d8 (cbuf,0xC0-1+$src$$reg );
3531 // CALL directly to the runtime
3532 cbuf.set_insts_mark();
3533 emit_opcode(cbuf,0xE8); // Call into runtime
3534 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3535 // Carry on here...
3536 %}
3538 enc_class FMul_ST_reg( eRegFPR src1 ) %{
3539 // Operand was loaded from memory into fp ST (stack top)
3540 // FMUL ST,$src /* D8 C8+i */
3541 emit_opcode(cbuf, 0xD8);
3542 emit_opcode(cbuf, 0xC8 + $src1$$reg);
3543 %}
3545 enc_class FAdd_ST_reg( eRegFPR src2 ) %{
3546 // FADDP ST,src2 /* D8 C0+i */
3547 emit_opcode(cbuf, 0xD8);
3548 emit_opcode(cbuf, 0xC0 + $src2$$reg);
3549 //could use FADDP src2,fpST /* DE C0+i */
3550 %}
3552 enc_class FAddP_reg_ST( eRegFPR src2 ) %{
3553 // FADDP src2,ST /* DE C0+i */
3554 emit_opcode(cbuf, 0xDE);
3555 emit_opcode(cbuf, 0xC0 + $src2$$reg);
3556 %}
3558 enc_class subFPR_divFPR_encode( eRegFPR src1, eRegFPR src2) %{
3559 // Operand has been loaded into fp ST (stack top)
3560 // FSUB ST,$src1
3561 emit_opcode(cbuf, 0xD8);
3562 emit_opcode(cbuf, 0xE0 + $src1$$reg);
3564 // FDIV
3565 emit_opcode(cbuf, 0xD8);
3566 emit_opcode(cbuf, 0xF0 + $src2$$reg);
3567 %}
3569 enc_class MulFAddF (eRegFPR src1, eRegFPR src2) %{
3570 // Operand was loaded from memory into fp ST (stack top)
3571 // FADD ST,$src /* D8 C0+i */
3572 emit_opcode(cbuf, 0xD8);
3573 emit_opcode(cbuf, 0xC0 + $src1$$reg);
3575 // FMUL ST,src2 /* D8 C*+i */
3576 emit_opcode(cbuf, 0xD8);
3577 emit_opcode(cbuf, 0xC8 + $src2$$reg);
3578 %}
3581 enc_class MulFAddFreverse (eRegFPR src1, eRegFPR src2) %{
3582 // Operand was loaded from memory into fp ST (stack top)
3583 // FADD ST,$src /* D8 C0+i */
3584 emit_opcode(cbuf, 0xD8);
3585 emit_opcode(cbuf, 0xC0 + $src1$$reg);
3587 // FMULP src2,ST /* DE C8+i */
3588 emit_opcode(cbuf, 0xDE);
3589 emit_opcode(cbuf, 0xC8 + $src2$$reg);
3590 %}
3592 // Atomically load the volatile long
3593 enc_class enc_loadL_volatile( memory mem, stackSlotL dst ) %{
3594 emit_opcode(cbuf,0xDF);
3595 int rm_byte_opcode = 0x05;
3596 int base = $mem$$base;
3597 int index = $mem$$index;
3598 int scale = $mem$$scale;
3599 int displace = $mem$$disp;
3600 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
3601 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
3602 store_to_stackslot( cbuf, 0x0DF, 0x07, $dst$$disp );
3603 %}
3605 // Volatile Store Long. Must be atomic, so move it into
3606 // the FP TOS and then do a 64-bit FIST. Has to probe the
3607 // target address before the store (for null-ptr checks)
3608 // so the memory operand is used twice in the encoding.
3609 enc_class enc_storeL_volatile( memory mem, stackSlotL src ) %{
3610 store_to_stackslot( cbuf, 0x0DF, 0x05, $src$$disp );
3611 cbuf.set_insts_mark(); // Mark start of FIST in case $mem has an oop
3612 emit_opcode(cbuf,0xDF);
3613 int rm_byte_opcode = 0x07;
3614 int base = $mem$$base;
3615 int index = $mem$$index;
3616 int scale = $mem$$scale;
3617 int displace = $mem$$disp;
3618 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
3619 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
3620 %}
3622 // Safepoint Poll. This polls the safepoint page, and causes an
3623 // exception if it is not readable. Unfortunately, it kills the condition code
3624 // in the process
3625 // We current use TESTL [spp],EDI
3626 // A better choice might be TESTB [spp + pagesize() - CacheLineSize()],0
3628 enc_class Safepoint_Poll() %{
3629 cbuf.relocate(cbuf.insts_mark(), relocInfo::poll_type, 0);
3630 emit_opcode(cbuf,0x85);
3631 emit_rm (cbuf, 0x0, 0x7, 0x5);
3632 emit_d32(cbuf, (intptr_t)os::get_polling_page());
3633 %}
3634 %}
3637 //----------FRAME--------------------------------------------------------------
3638 // Definition of frame structure and management information.
3639 //
3640 // S T A C K L A Y O U T Allocators stack-slot number
3641 // | (to get allocators register number
3642 // G Owned by | | v add OptoReg::stack0())
3643 // r CALLER | |
3644 // o | +--------+ pad to even-align allocators stack-slot
3645 // w V | pad0 | numbers; owned by CALLER
3646 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned
3647 // h ^ | in | 5
3648 // | | args | 4 Holes in incoming args owned by SELF
3649 // | | | | 3
3650 // | | +--------+
3651 // V | | old out| Empty on Intel, window on Sparc
3652 // | old |preserve| Must be even aligned.
3653 // | SP-+--------+----> Matcher::_old_SP, even aligned
3654 // | | in | 3 area for Intel ret address
3655 // Owned by |preserve| Empty on Sparc.
3656 // SELF +--------+
3657 // | | pad2 | 2 pad to align old SP
3658 // | +--------+ 1
3659 // | | locks | 0
3660 // | +--------+----> OptoReg::stack0(), even aligned
3661 // | | pad1 | 11 pad to align new SP
3662 // | +--------+
3663 // | | | 10
3664 // | | spills | 9 spills
3665 // V | | 8 (pad0 slot for callee)
3666 // -----------+--------+----> Matcher::_out_arg_limit, unaligned
3667 // ^ | out | 7
3668 // | | args | 6 Holes in outgoing args owned by CALLEE
3669 // Owned by +--------+
3670 // CALLEE | new out| 6 Empty on Intel, window on Sparc
3671 // | new |preserve| Must be even-aligned.
3672 // | SP-+--------+----> Matcher::_new_SP, even aligned
3673 // | | |
3674 //
3675 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is
3676 // known from SELF's arguments and the Java calling convention.
3677 // Region 6-7 is determined per call site.
3678 // Note 2: If the calling convention leaves holes in the incoming argument
3679 // area, those holes are owned by SELF. Holes in the outgoing area
3680 // are owned by the CALLEE. Holes should not be nessecary in the
3681 // incoming area, as the Java calling convention is completely under
3682 // the control of the AD file. Doubles can be sorted and packed to
3683 // avoid holes. Holes in the outgoing arguments may be nessecary for
3684 // varargs C calling conventions.
3685 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is
3686 // even aligned with pad0 as needed.
3687 // Region 6 is even aligned. Region 6-7 is NOT even aligned;
3688 // region 6-11 is even aligned; it may be padded out more so that
3689 // the region from SP to FP meets the minimum stack alignment.
3691 frame %{
3692 // What direction does stack grow in (assumed to be same for C & Java)
3693 stack_direction(TOWARDS_LOW);
3695 // These three registers define part of the calling convention
3696 // between compiled code and the interpreter.
3697 inline_cache_reg(EAX); // Inline Cache Register
3698 interpreter_method_oop_reg(EBX); // Method Oop Register when calling interpreter
3700 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset]
3701 cisc_spilling_operand_name(indOffset32);
3703 // Number of stack slots consumed by locking an object
3704 sync_stack_slots(1);
3706 // Compiled code's Frame Pointer
3707 frame_pointer(ESP);
3708 // Interpreter stores its frame pointer in a register which is
3709 // stored to the stack by I2CAdaptors.
3710 // I2CAdaptors convert from interpreted java to compiled java.
3711 interpreter_frame_pointer(EBP);
3713 // Stack alignment requirement
3714 // Alignment size in bytes (128-bit -> 16 bytes)
3715 stack_alignment(StackAlignmentInBytes);
3717 // Number of stack slots between incoming argument block and the start of
3718 // a new frame. The PROLOG must add this many slots to the stack. The
3719 // EPILOG must remove this many slots. Intel needs one slot for
3720 // return address and one for rbp, (must save rbp)
3721 in_preserve_stack_slots(2+VerifyStackAtCalls);
3723 // Number of outgoing stack slots killed above the out_preserve_stack_slots
3724 // for calls to C. Supports the var-args backing area for register parms.
3725 varargs_C_out_slots_killed(0);
3727 // The after-PROLOG location of the return address. Location of
3728 // return address specifies a type (REG or STACK) and a number
3729 // representing the register number (i.e. - use a register name) or
3730 // stack slot.
3731 // Ret Addr is on stack in slot 0 if no locks or verification or alignment.
3732 // Otherwise, it is above the locks and verification slot and alignment word
3733 return_addr(STACK - 1 +
3734 round_to((Compile::current()->in_preserve_stack_slots() +
3735 Compile::current()->fixed_slots()),
3736 stack_alignment_in_slots()));
3738 // Body of function which returns an integer array locating
3739 // arguments either in registers or in stack slots. Passed an array
3740 // of ideal registers called "sig" and a "length" count. Stack-slot
3741 // offsets are based on outgoing arguments, i.e. a CALLER setting up
3742 // arguments for a CALLEE. Incoming stack arguments are
3743 // automatically biased by the preserve_stack_slots field above.
3744 calling_convention %{
3745 // No difference between ingoing/outgoing just pass false
3746 SharedRuntime::java_calling_convention(sig_bt, regs, length, false);
3747 %}
3750 // Body of function which returns an integer array locating
3751 // arguments either in registers or in stack slots. Passed an array
3752 // of ideal registers called "sig" and a "length" count. Stack-slot
3753 // offsets are based on outgoing arguments, i.e. a CALLER setting up
3754 // arguments for a CALLEE. Incoming stack arguments are
3755 // automatically biased by the preserve_stack_slots field above.
3756 c_calling_convention %{
3757 // This is obviously always outgoing
3758 (void) SharedRuntime::c_calling_convention(sig_bt, regs, length);
3759 %}
3761 // Location of C & interpreter return values
3762 c_return_value %{
3763 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
3764 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
3765 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
3767 // in SSE2+ mode we want to keep the FPU stack clean so pretend
3768 // that C functions return float and double results in XMM0.
3769 if( ideal_reg == Op_RegD && UseSSE>=2 )
3770 return OptoRegPair(XMM0b_num,XMM0_num);
3771 if( ideal_reg == Op_RegF && UseSSE>=2 )
3772 return OptoRegPair(OptoReg::Bad,XMM0_num);
3774 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
3775 %}
3777 // Location of return values
3778 return_value %{
3779 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
3780 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
3781 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
3782 if( ideal_reg == Op_RegD && UseSSE>=2 )
3783 return OptoRegPair(XMM0b_num,XMM0_num);
3784 if( ideal_reg == Op_RegF && UseSSE>=1 )
3785 return OptoRegPair(OptoReg::Bad,XMM0_num);
3786 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
3787 %}
3789 %}
3791 //----------ATTRIBUTES---------------------------------------------------------
3792 //----------Operand Attributes-------------------------------------------------
3793 op_attrib op_cost(0); // Required cost attribute
3795 //----------Instruction Attributes---------------------------------------------
3796 ins_attrib ins_cost(100); // Required cost attribute
3797 ins_attrib ins_size(8); // Required size attribute (in bits)
3798 ins_attrib ins_short_branch(0); // Required flag: is this instruction a
3799 // non-matching short branch variant of some
3800 // long branch?
3801 ins_attrib ins_alignment(1); // Required alignment attribute (must be a power of 2)
3802 // specifies the alignment that some part of the instruction (not
3803 // necessarily the start) requires. If > 1, a compute_padding()
3804 // function must be provided for the instruction
3806 //----------OPERANDS-----------------------------------------------------------
3807 // Operand definitions must precede instruction definitions for correct parsing
3808 // in the ADLC because operands constitute user defined types which are used in
3809 // instruction definitions.
3811 //----------Simple Operands----------------------------------------------------
3812 // Immediate Operands
3813 // Integer Immediate
3814 operand immI() %{
3815 match(ConI);
3817 op_cost(10);
3818 format %{ %}
3819 interface(CONST_INTER);
3820 %}
3822 // Constant for test vs zero
3823 operand immI0() %{
3824 predicate(n->get_int() == 0);
3825 match(ConI);
3827 op_cost(0);
3828 format %{ %}
3829 interface(CONST_INTER);
3830 %}
3832 // Constant for increment
3833 operand immI1() %{
3834 predicate(n->get_int() == 1);
3835 match(ConI);
3837 op_cost(0);
3838 format %{ %}
3839 interface(CONST_INTER);
3840 %}
3842 // Constant for decrement
3843 operand immI_M1() %{
3844 predicate(n->get_int() == -1);
3845 match(ConI);
3847 op_cost(0);
3848 format %{ %}
3849 interface(CONST_INTER);
3850 %}
3852 // Valid scale values for addressing modes
3853 operand immI2() %{
3854 predicate(0 <= n->get_int() && (n->get_int() <= 3));
3855 match(ConI);
3857 format %{ %}
3858 interface(CONST_INTER);
3859 %}
3861 operand immI8() %{
3862 predicate((-128 <= n->get_int()) && (n->get_int() <= 127));
3863 match(ConI);
3865 op_cost(5);
3866 format %{ %}
3867 interface(CONST_INTER);
3868 %}
3870 operand immI16() %{
3871 predicate((-32768 <= n->get_int()) && (n->get_int() <= 32767));
3872 match(ConI);
3874 op_cost(10);
3875 format %{ %}
3876 interface(CONST_INTER);
3877 %}
3879 // Constant for long shifts
3880 operand immI_32() %{
3881 predicate( n->get_int() == 32 );
3882 match(ConI);
3884 op_cost(0);
3885 format %{ %}
3886 interface(CONST_INTER);
3887 %}
3889 operand immI_1_31() %{
3890 predicate( n->get_int() >= 1 && n->get_int() <= 31 );
3891 match(ConI);
3893 op_cost(0);
3894 format %{ %}
3895 interface(CONST_INTER);
3896 %}
3898 operand immI_32_63() %{
3899 predicate( n->get_int() >= 32 && n->get_int() <= 63 );
3900 match(ConI);
3901 op_cost(0);
3903 format %{ %}
3904 interface(CONST_INTER);
3905 %}
3907 operand immI_1() %{
3908 predicate( n->get_int() == 1 );
3909 match(ConI);
3911 op_cost(0);
3912 format %{ %}
3913 interface(CONST_INTER);
3914 %}
3916 operand immI_2() %{
3917 predicate( n->get_int() == 2 );
3918 match(ConI);
3920 op_cost(0);
3921 format %{ %}
3922 interface(CONST_INTER);
3923 %}
3925 operand immI_3() %{
3926 predicate( n->get_int() == 3 );
3927 match(ConI);
3929 op_cost(0);
3930 format %{ %}
3931 interface(CONST_INTER);
3932 %}
3934 // Pointer Immediate
3935 operand immP() %{
3936 match(ConP);
3938 op_cost(10);
3939 format %{ %}
3940 interface(CONST_INTER);
3941 %}
3943 // NULL Pointer Immediate
3944 operand immP0() %{
3945 predicate( n->get_ptr() == 0 );
3946 match(ConP);
3947 op_cost(0);
3949 format %{ %}
3950 interface(CONST_INTER);
3951 %}
3953 // Long Immediate
3954 operand immL() %{
3955 match(ConL);
3957 op_cost(20);
3958 format %{ %}
3959 interface(CONST_INTER);
3960 %}
3962 // Long Immediate zero
3963 operand immL0() %{
3964 predicate( n->get_long() == 0L );
3965 match(ConL);
3966 op_cost(0);
3968 format %{ %}
3969 interface(CONST_INTER);
3970 %}
3972 // Long Immediate zero
3973 operand immL_M1() %{
3974 predicate( n->get_long() == -1L );
3975 match(ConL);
3976 op_cost(0);
3978 format %{ %}
3979 interface(CONST_INTER);
3980 %}
3982 // Long immediate from 0 to 127.
3983 // Used for a shorter form of long mul by 10.
3984 operand immL_127() %{
3985 predicate((0 <= n->get_long()) && (n->get_long() <= 127));
3986 match(ConL);
3987 op_cost(0);
3989 format %{ %}
3990 interface(CONST_INTER);
3991 %}
3993 // Long Immediate: low 32-bit mask
3994 operand immL_32bits() %{
3995 predicate(n->get_long() == 0xFFFFFFFFL);
3996 match(ConL);
3997 op_cost(0);
3999 format %{ %}
4000 interface(CONST_INTER);
4001 %}
4003 // Long Immediate: low 32-bit mask
4004 operand immL32() %{
4005 predicate(n->get_long() == (int)(n->get_long()));
4006 match(ConL);
4007 op_cost(20);
4009 format %{ %}
4010 interface(CONST_INTER);
4011 %}
4013 //Double Immediate zero
4014 operand immDPR0() %{
4015 // Do additional (and counter-intuitive) test against NaN to work around VC++
4016 // bug that generates code such that NaNs compare equal to 0.0
4017 predicate( UseSSE<=1 && n->getd() == 0.0 && !g_isnan(n->getd()) );
4018 match(ConD);
4020 op_cost(5);
4021 format %{ %}
4022 interface(CONST_INTER);
4023 %}
4025 // Double Immediate one
4026 operand immDPR1() %{
4027 predicate( UseSSE<=1 && n->getd() == 1.0 );
4028 match(ConD);
4030 op_cost(5);
4031 format %{ %}
4032 interface(CONST_INTER);
4033 %}
4035 // Double Immediate
4036 operand immDPR() %{
4037 predicate(UseSSE<=1);
4038 match(ConD);
4040 op_cost(5);
4041 format %{ %}
4042 interface(CONST_INTER);
4043 %}
4045 operand immD() %{
4046 predicate(UseSSE>=2);
4047 match(ConD);
4049 op_cost(5);
4050 format %{ %}
4051 interface(CONST_INTER);
4052 %}
4054 // Double Immediate zero
4055 operand immD0() %{
4056 // Do additional (and counter-intuitive) test against NaN to work around VC++
4057 // bug that generates code such that NaNs compare equal to 0.0 AND do not
4058 // compare equal to -0.0.
4059 predicate( UseSSE>=2 && jlong_cast(n->getd()) == 0 );
4060 match(ConD);
4062 format %{ %}
4063 interface(CONST_INTER);
4064 %}
4066 // Float Immediate zero
4067 operand immFPR0() %{
4068 predicate(UseSSE == 0 && n->getf() == 0.0F);
4069 match(ConF);
4071 op_cost(5);
4072 format %{ %}
4073 interface(CONST_INTER);
4074 %}
4076 // Float Immediate one
4077 operand immFPR1() %{
4078 predicate(UseSSE == 0 && n->getf() == 1.0F);
4079 match(ConF);
4081 op_cost(5);
4082 format %{ %}
4083 interface(CONST_INTER);
4084 %}
4086 // Float Immediate
4087 operand immFPR() %{
4088 predicate( UseSSE == 0 );
4089 match(ConF);
4091 op_cost(5);
4092 format %{ %}
4093 interface(CONST_INTER);
4094 %}
4096 // Float Immediate
4097 operand immF() %{
4098 predicate(UseSSE >= 1);
4099 match(ConF);
4101 op_cost(5);
4102 format %{ %}
4103 interface(CONST_INTER);
4104 %}
4106 // Float Immediate zero. Zero and not -0.0
4107 operand immF0() %{
4108 predicate( UseSSE >= 1 && jint_cast(n->getf()) == 0 );
4109 match(ConF);
4111 op_cost(5);
4112 format %{ %}
4113 interface(CONST_INTER);
4114 %}
4116 // Immediates for special shifts (sign extend)
4118 // Constants for increment
4119 operand immI_16() %{
4120 predicate( n->get_int() == 16 );
4121 match(ConI);
4123 format %{ %}
4124 interface(CONST_INTER);
4125 %}
4127 operand immI_24() %{
4128 predicate( n->get_int() == 24 );
4129 match(ConI);
4131 format %{ %}
4132 interface(CONST_INTER);
4133 %}
4135 // Constant for byte-wide masking
4136 operand immI_255() %{
4137 predicate( n->get_int() == 255 );
4138 match(ConI);
4140 format %{ %}
4141 interface(CONST_INTER);
4142 %}
4144 // Constant for short-wide masking
4145 operand immI_65535() %{
4146 predicate(n->get_int() == 65535);
4147 match(ConI);
4149 format %{ %}
4150 interface(CONST_INTER);
4151 %}
4153 // Register Operands
4154 // Integer Register
4155 operand rRegI() %{
4156 constraint(ALLOC_IN_RC(int_reg));
4157 match(RegI);
4158 match(xRegI);
4159 match(eAXRegI);
4160 match(eBXRegI);
4161 match(eCXRegI);
4162 match(eDXRegI);
4163 match(eDIRegI);
4164 match(eSIRegI);
4166 format %{ %}
4167 interface(REG_INTER);
4168 %}
4170 // Subset of Integer Register
4171 operand xRegI(rRegI reg) %{
4172 constraint(ALLOC_IN_RC(int_x_reg));
4173 match(reg);
4174 match(eAXRegI);
4175 match(eBXRegI);
4176 match(eCXRegI);
4177 match(eDXRegI);
4179 format %{ %}
4180 interface(REG_INTER);
4181 %}
4183 // Special Registers
4184 operand eAXRegI(xRegI reg) %{
4185 constraint(ALLOC_IN_RC(eax_reg));
4186 match(reg);
4187 match(rRegI);
4189 format %{ "EAX" %}
4190 interface(REG_INTER);
4191 %}
4193 // Special Registers
4194 operand eBXRegI(xRegI reg) %{
4195 constraint(ALLOC_IN_RC(ebx_reg));
4196 match(reg);
4197 match(rRegI);
4199 format %{ "EBX" %}
4200 interface(REG_INTER);
4201 %}
4203 operand eCXRegI(xRegI reg) %{
4204 constraint(ALLOC_IN_RC(ecx_reg));
4205 match(reg);
4206 match(rRegI);
4208 format %{ "ECX" %}
4209 interface(REG_INTER);
4210 %}
4212 operand eDXRegI(xRegI reg) %{
4213 constraint(ALLOC_IN_RC(edx_reg));
4214 match(reg);
4215 match(rRegI);
4217 format %{ "EDX" %}
4218 interface(REG_INTER);
4219 %}
4221 operand eDIRegI(xRegI reg) %{
4222 constraint(ALLOC_IN_RC(edi_reg));
4223 match(reg);
4224 match(rRegI);
4226 format %{ "EDI" %}
4227 interface(REG_INTER);
4228 %}
4230 operand naxRegI() %{
4231 constraint(ALLOC_IN_RC(nax_reg));
4232 match(RegI);
4233 match(eCXRegI);
4234 match(eDXRegI);
4235 match(eSIRegI);
4236 match(eDIRegI);
4238 format %{ %}
4239 interface(REG_INTER);
4240 %}
4242 operand nadxRegI() %{
4243 constraint(ALLOC_IN_RC(nadx_reg));
4244 match(RegI);
4245 match(eBXRegI);
4246 match(eCXRegI);
4247 match(eSIRegI);
4248 match(eDIRegI);
4250 format %{ %}
4251 interface(REG_INTER);
4252 %}
4254 operand ncxRegI() %{
4255 constraint(ALLOC_IN_RC(ncx_reg));
4256 match(RegI);
4257 match(eAXRegI);
4258 match(eDXRegI);
4259 match(eSIRegI);
4260 match(eDIRegI);
4262 format %{ %}
4263 interface(REG_INTER);
4264 %}
4266 // // This operand was used by cmpFastUnlock, but conflicted with 'object' reg
4267 // //
4268 operand eSIRegI(xRegI reg) %{
4269 constraint(ALLOC_IN_RC(esi_reg));
4270 match(reg);
4271 match(rRegI);
4273 format %{ "ESI" %}
4274 interface(REG_INTER);
4275 %}
4277 // Pointer Register
4278 operand anyRegP() %{
4279 constraint(ALLOC_IN_RC(any_reg));
4280 match(RegP);
4281 match(eAXRegP);
4282 match(eBXRegP);
4283 match(eCXRegP);
4284 match(eDIRegP);
4285 match(eRegP);
4287 format %{ %}
4288 interface(REG_INTER);
4289 %}
4291 operand eRegP() %{
4292 constraint(ALLOC_IN_RC(int_reg));
4293 match(RegP);
4294 match(eAXRegP);
4295 match(eBXRegP);
4296 match(eCXRegP);
4297 match(eDIRegP);
4299 format %{ %}
4300 interface(REG_INTER);
4301 %}
4303 // On windows95, EBP is not safe to use for implicit null tests.
4304 operand eRegP_no_EBP() %{
4305 constraint(ALLOC_IN_RC(int_reg_no_rbp));
4306 match(RegP);
4307 match(eAXRegP);
4308 match(eBXRegP);
4309 match(eCXRegP);
4310 match(eDIRegP);
4312 op_cost(100);
4313 format %{ %}
4314 interface(REG_INTER);
4315 %}
4317 operand naxRegP() %{
4318 constraint(ALLOC_IN_RC(nax_reg));
4319 match(RegP);
4320 match(eBXRegP);
4321 match(eDXRegP);
4322 match(eCXRegP);
4323 match(eSIRegP);
4324 match(eDIRegP);
4326 format %{ %}
4327 interface(REG_INTER);
4328 %}
4330 operand nabxRegP() %{
4331 constraint(ALLOC_IN_RC(nabx_reg));
4332 match(RegP);
4333 match(eCXRegP);
4334 match(eDXRegP);
4335 match(eSIRegP);
4336 match(eDIRegP);
4338 format %{ %}
4339 interface(REG_INTER);
4340 %}
4342 operand pRegP() %{
4343 constraint(ALLOC_IN_RC(p_reg));
4344 match(RegP);
4345 match(eBXRegP);
4346 match(eDXRegP);
4347 match(eSIRegP);
4348 match(eDIRegP);
4350 format %{ %}
4351 interface(REG_INTER);
4352 %}
4354 // Special Registers
4355 // Return a pointer value
4356 operand eAXRegP(eRegP reg) %{
4357 constraint(ALLOC_IN_RC(eax_reg));
4358 match(reg);
4359 format %{ "EAX" %}
4360 interface(REG_INTER);
4361 %}
4363 // Used in AtomicAdd
4364 operand eBXRegP(eRegP reg) %{
4365 constraint(ALLOC_IN_RC(ebx_reg));
4366 match(reg);
4367 format %{ "EBX" %}
4368 interface(REG_INTER);
4369 %}
4371 // Tail-call (interprocedural jump) to interpreter
4372 operand eCXRegP(eRegP reg) %{
4373 constraint(ALLOC_IN_RC(ecx_reg));
4374 match(reg);
4375 format %{ "ECX" %}
4376 interface(REG_INTER);
4377 %}
4379 operand eSIRegP(eRegP reg) %{
4380 constraint(ALLOC_IN_RC(esi_reg));
4381 match(reg);
4382 format %{ "ESI" %}
4383 interface(REG_INTER);
4384 %}
4386 // Used in rep stosw
4387 operand eDIRegP(eRegP reg) %{
4388 constraint(ALLOC_IN_RC(edi_reg));
4389 match(reg);
4390 format %{ "EDI" %}
4391 interface(REG_INTER);
4392 %}
4394 operand eBPRegP() %{
4395 constraint(ALLOC_IN_RC(ebp_reg));
4396 match(RegP);
4397 format %{ "EBP" %}
4398 interface(REG_INTER);
4399 %}
4401 operand eRegL() %{
4402 constraint(ALLOC_IN_RC(long_reg));
4403 match(RegL);
4404 match(eADXRegL);
4406 format %{ %}
4407 interface(REG_INTER);
4408 %}
4410 operand eADXRegL( eRegL reg ) %{
4411 constraint(ALLOC_IN_RC(eadx_reg));
4412 match(reg);
4414 format %{ "EDX:EAX" %}
4415 interface(REG_INTER);
4416 %}
4418 operand eBCXRegL( eRegL reg ) %{
4419 constraint(ALLOC_IN_RC(ebcx_reg));
4420 match(reg);
4422 format %{ "EBX:ECX" %}
4423 interface(REG_INTER);
4424 %}
4426 // Special case for integer high multiply
4427 operand eADXRegL_low_only() %{
4428 constraint(ALLOC_IN_RC(eadx_reg));
4429 match(RegL);
4431 format %{ "EAX" %}
4432 interface(REG_INTER);
4433 %}
4435 // Flags register, used as output of compare instructions
4436 operand eFlagsReg() %{
4437 constraint(ALLOC_IN_RC(int_flags));
4438 match(RegFlags);
4440 format %{ "EFLAGS" %}
4441 interface(REG_INTER);
4442 %}
4444 // Flags register, used as output of FLOATING POINT compare instructions
4445 operand eFlagsRegU() %{
4446 constraint(ALLOC_IN_RC(int_flags));
4447 match(RegFlags);
4449 format %{ "EFLAGS_U" %}
4450 interface(REG_INTER);
4451 %}
4453 operand eFlagsRegUCF() %{
4454 constraint(ALLOC_IN_RC(int_flags));
4455 match(RegFlags);
4456 predicate(false);
4458 format %{ "EFLAGS_U_CF" %}
4459 interface(REG_INTER);
4460 %}
4462 // Condition Code Register used by long compare
4463 operand flagsReg_long_LTGE() %{
4464 constraint(ALLOC_IN_RC(int_flags));
4465 match(RegFlags);
4466 format %{ "FLAGS_LTGE" %}
4467 interface(REG_INTER);
4468 %}
4469 operand flagsReg_long_EQNE() %{
4470 constraint(ALLOC_IN_RC(int_flags));
4471 match(RegFlags);
4472 format %{ "FLAGS_EQNE" %}
4473 interface(REG_INTER);
4474 %}
4475 operand flagsReg_long_LEGT() %{
4476 constraint(ALLOC_IN_RC(int_flags));
4477 match(RegFlags);
4478 format %{ "FLAGS_LEGT" %}
4479 interface(REG_INTER);
4480 %}
4482 // Float register operands
4483 operand regDPR() %{
4484 predicate( UseSSE < 2 );
4485 constraint(ALLOC_IN_RC(fp_dbl_reg));
4486 match(RegD);
4487 match(regDPR1);
4488 match(regDPR2);
4489 format %{ %}
4490 interface(REG_INTER);
4491 %}
4493 operand regDPR1(regDPR reg) %{
4494 predicate( UseSSE < 2 );
4495 constraint(ALLOC_IN_RC(fp_dbl_reg0));
4496 match(reg);
4497 format %{ "FPR1" %}
4498 interface(REG_INTER);
4499 %}
4501 operand regDPR2(regDPR reg) %{
4502 predicate( UseSSE < 2 );
4503 constraint(ALLOC_IN_RC(fp_dbl_reg1));
4504 match(reg);
4505 format %{ "FPR2" %}
4506 interface(REG_INTER);
4507 %}
4509 operand regnotDPR1(regDPR reg) %{
4510 predicate( UseSSE < 2 );
4511 constraint(ALLOC_IN_RC(fp_dbl_notreg0));
4512 match(reg);
4513 format %{ %}
4514 interface(REG_INTER);
4515 %}
4517 // Float register operands
4518 operand regFPR() %{
4519 predicate( UseSSE < 2 );
4520 constraint(ALLOC_IN_RC(fp_flt_reg));
4521 match(RegF);
4522 match(regFPR1);
4523 format %{ %}
4524 interface(REG_INTER);
4525 %}
4527 // Float register operands
4528 operand regFPR1(regFPR reg) %{
4529 predicate( UseSSE < 2 );
4530 constraint(ALLOC_IN_RC(fp_flt_reg0));
4531 match(reg);
4532 format %{ "FPR1" %}
4533 interface(REG_INTER);
4534 %}
4536 // XMM Float register operands
4537 operand regF() %{
4538 predicate( UseSSE>=1 );
4539 constraint(ALLOC_IN_RC(float_reg));
4540 match(RegF);
4541 format %{ %}
4542 interface(REG_INTER);
4543 %}
4545 // XMM Double register operands
4546 operand regD() %{
4547 predicate( UseSSE>=2 );
4548 constraint(ALLOC_IN_RC(double_reg));
4549 match(RegD);
4550 format %{ %}
4551 interface(REG_INTER);
4552 %}
4555 //----------Memory Operands----------------------------------------------------
4556 // Direct Memory Operand
4557 operand direct(immP addr) %{
4558 match(addr);
4560 format %{ "[$addr]" %}
4561 interface(MEMORY_INTER) %{
4562 base(0xFFFFFFFF);
4563 index(0x4);
4564 scale(0x0);
4565 disp($addr);
4566 %}
4567 %}
4569 // Indirect Memory Operand
4570 operand indirect(eRegP reg) %{
4571 constraint(ALLOC_IN_RC(int_reg));
4572 match(reg);
4574 format %{ "[$reg]" %}
4575 interface(MEMORY_INTER) %{
4576 base($reg);
4577 index(0x4);
4578 scale(0x0);
4579 disp(0x0);
4580 %}
4581 %}
4583 // Indirect Memory Plus Short Offset Operand
4584 operand indOffset8(eRegP reg, immI8 off) %{
4585 match(AddP reg off);
4587 format %{ "[$reg + $off]" %}
4588 interface(MEMORY_INTER) %{
4589 base($reg);
4590 index(0x4);
4591 scale(0x0);
4592 disp($off);
4593 %}
4594 %}
4596 // Indirect Memory Plus Long Offset Operand
4597 operand indOffset32(eRegP reg, immI off) %{
4598 match(AddP reg off);
4600 format %{ "[$reg + $off]" %}
4601 interface(MEMORY_INTER) %{
4602 base($reg);
4603 index(0x4);
4604 scale(0x0);
4605 disp($off);
4606 %}
4607 %}
4609 // Indirect Memory Plus Long Offset Operand
4610 operand indOffset32X(rRegI reg, immP off) %{
4611 match(AddP off reg);
4613 format %{ "[$reg + $off]" %}
4614 interface(MEMORY_INTER) %{
4615 base($reg);
4616 index(0x4);
4617 scale(0x0);
4618 disp($off);
4619 %}
4620 %}
4622 // Indirect Memory Plus Index Register Plus Offset Operand
4623 operand indIndexOffset(eRegP reg, rRegI ireg, immI off) %{
4624 match(AddP (AddP reg ireg) off);
4626 op_cost(10);
4627 format %{"[$reg + $off + $ireg]" %}
4628 interface(MEMORY_INTER) %{
4629 base($reg);
4630 index($ireg);
4631 scale(0x0);
4632 disp($off);
4633 %}
4634 %}
4636 // Indirect Memory Plus Index Register Plus Offset Operand
4637 operand indIndex(eRegP reg, rRegI ireg) %{
4638 match(AddP reg ireg);
4640 op_cost(10);
4641 format %{"[$reg + $ireg]" %}
4642 interface(MEMORY_INTER) %{
4643 base($reg);
4644 index($ireg);
4645 scale(0x0);
4646 disp(0x0);
4647 %}
4648 %}
4650 // // -------------------------------------------------------------------------
4651 // // 486 architecture doesn't support "scale * index + offset" with out a base
4652 // // -------------------------------------------------------------------------
4653 // // Scaled Memory Operands
4654 // // Indirect Memory Times Scale Plus Offset Operand
4655 // operand indScaleOffset(immP off, rRegI ireg, immI2 scale) %{
4656 // match(AddP off (LShiftI ireg scale));
4657 //
4658 // op_cost(10);
4659 // format %{"[$off + $ireg << $scale]" %}
4660 // interface(MEMORY_INTER) %{
4661 // base(0x4);
4662 // index($ireg);
4663 // scale($scale);
4664 // disp($off);
4665 // %}
4666 // %}
4668 // Indirect Memory Times Scale Plus Index Register
4669 operand indIndexScale(eRegP reg, rRegI ireg, immI2 scale) %{
4670 match(AddP reg (LShiftI ireg scale));
4672 op_cost(10);
4673 format %{"[$reg + $ireg << $scale]" %}
4674 interface(MEMORY_INTER) %{
4675 base($reg);
4676 index($ireg);
4677 scale($scale);
4678 disp(0x0);
4679 %}
4680 %}
4682 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
4683 operand indIndexScaleOffset(eRegP reg, immI off, rRegI ireg, immI2 scale) %{
4684 match(AddP (AddP reg (LShiftI ireg scale)) off);
4686 op_cost(10);
4687 format %{"[$reg + $off + $ireg << $scale]" %}
4688 interface(MEMORY_INTER) %{
4689 base($reg);
4690 index($ireg);
4691 scale($scale);
4692 disp($off);
4693 %}
4694 %}
4696 //----------Load Long Memory Operands------------------------------------------
4697 // The load-long idiom will use it's address expression again after loading
4698 // the first word of the long. If the load-long destination overlaps with
4699 // registers used in the addressing expression, the 2nd half will be loaded
4700 // from a clobbered address. Fix this by requiring that load-long use
4701 // address registers that do not overlap with the load-long target.
4703 // load-long support
4704 operand load_long_RegP() %{
4705 constraint(ALLOC_IN_RC(esi_reg));
4706 match(RegP);
4707 match(eSIRegP);
4708 op_cost(100);
4709 format %{ %}
4710 interface(REG_INTER);
4711 %}
4713 // Indirect Memory Operand Long
4714 operand load_long_indirect(load_long_RegP reg) %{
4715 constraint(ALLOC_IN_RC(esi_reg));
4716 match(reg);
4718 format %{ "[$reg]" %}
4719 interface(MEMORY_INTER) %{
4720 base($reg);
4721 index(0x4);
4722 scale(0x0);
4723 disp(0x0);
4724 %}
4725 %}
4727 // Indirect Memory Plus Long Offset Operand
4728 operand load_long_indOffset32(load_long_RegP reg, immI off) %{
4729 match(AddP reg off);
4731 format %{ "[$reg + $off]" %}
4732 interface(MEMORY_INTER) %{
4733 base($reg);
4734 index(0x4);
4735 scale(0x0);
4736 disp($off);
4737 %}
4738 %}
4740 opclass load_long_memory(load_long_indirect, load_long_indOffset32);
4743 //----------Special Memory Operands--------------------------------------------
4744 // Stack Slot Operand - This operand is used for loading and storing temporary
4745 // values on the stack where a match requires a value to
4746 // flow through memory.
4747 operand stackSlotP(sRegP reg) %{
4748 constraint(ALLOC_IN_RC(stack_slots));
4749 // No match rule because this operand is only generated in matching
4750 format %{ "[$reg]" %}
4751 interface(MEMORY_INTER) %{
4752 base(0x4); // ESP
4753 index(0x4); // No Index
4754 scale(0x0); // No Scale
4755 disp($reg); // Stack Offset
4756 %}
4757 %}
4759 operand stackSlotI(sRegI reg) %{
4760 constraint(ALLOC_IN_RC(stack_slots));
4761 // No match rule because this operand is only generated in matching
4762 format %{ "[$reg]" %}
4763 interface(MEMORY_INTER) %{
4764 base(0x4); // ESP
4765 index(0x4); // No Index
4766 scale(0x0); // No Scale
4767 disp($reg); // Stack Offset
4768 %}
4769 %}
4771 operand stackSlotF(sRegF reg) %{
4772 constraint(ALLOC_IN_RC(stack_slots));
4773 // No match rule because this operand is only generated in matching
4774 format %{ "[$reg]" %}
4775 interface(MEMORY_INTER) %{
4776 base(0x4); // ESP
4777 index(0x4); // No Index
4778 scale(0x0); // No Scale
4779 disp($reg); // Stack Offset
4780 %}
4781 %}
4783 operand stackSlotD(sRegD reg) %{
4784 constraint(ALLOC_IN_RC(stack_slots));
4785 // No match rule because this operand is only generated in matching
4786 format %{ "[$reg]" %}
4787 interface(MEMORY_INTER) %{
4788 base(0x4); // ESP
4789 index(0x4); // No Index
4790 scale(0x0); // No Scale
4791 disp($reg); // Stack Offset
4792 %}
4793 %}
4795 operand stackSlotL(sRegL reg) %{
4796 constraint(ALLOC_IN_RC(stack_slots));
4797 // No match rule because this operand is only generated in matching
4798 format %{ "[$reg]" %}
4799 interface(MEMORY_INTER) %{
4800 base(0x4); // ESP
4801 index(0x4); // No Index
4802 scale(0x0); // No Scale
4803 disp($reg); // Stack Offset
4804 %}
4805 %}
4807 //----------Memory Operands - Win95 Implicit Null Variants----------------
4808 // Indirect Memory Operand
4809 operand indirect_win95_safe(eRegP_no_EBP reg)
4810 %{
4811 constraint(ALLOC_IN_RC(int_reg));
4812 match(reg);
4814 op_cost(100);
4815 format %{ "[$reg]" %}
4816 interface(MEMORY_INTER) %{
4817 base($reg);
4818 index(0x4);
4819 scale(0x0);
4820 disp(0x0);
4821 %}
4822 %}
4824 // Indirect Memory Plus Short Offset Operand
4825 operand indOffset8_win95_safe(eRegP_no_EBP reg, immI8 off)
4826 %{
4827 match(AddP reg off);
4829 op_cost(100);
4830 format %{ "[$reg + $off]" %}
4831 interface(MEMORY_INTER) %{
4832 base($reg);
4833 index(0x4);
4834 scale(0x0);
4835 disp($off);
4836 %}
4837 %}
4839 // Indirect Memory Plus Long Offset Operand
4840 operand indOffset32_win95_safe(eRegP_no_EBP reg, immI off)
4841 %{
4842 match(AddP reg off);
4844 op_cost(100);
4845 format %{ "[$reg + $off]" %}
4846 interface(MEMORY_INTER) %{
4847 base($reg);
4848 index(0x4);
4849 scale(0x0);
4850 disp($off);
4851 %}
4852 %}
4854 // Indirect Memory Plus Index Register Plus Offset Operand
4855 operand indIndexOffset_win95_safe(eRegP_no_EBP reg, rRegI ireg, immI off)
4856 %{
4857 match(AddP (AddP reg ireg) off);
4859 op_cost(100);
4860 format %{"[$reg + $off + $ireg]" %}
4861 interface(MEMORY_INTER) %{
4862 base($reg);
4863 index($ireg);
4864 scale(0x0);
4865 disp($off);
4866 %}
4867 %}
4869 // Indirect Memory Times Scale Plus Index Register
4870 operand indIndexScale_win95_safe(eRegP_no_EBP reg, rRegI ireg, immI2 scale)
4871 %{
4872 match(AddP reg (LShiftI ireg scale));
4874 op_cost(100);
4875 format %{"[$reg + $ireg << $scale]" %}
4876 interface(MEMORY_INTER) %{
4877 base($reg);
4878 index($ireg);
4879 scale($scale);
4880 disp(0x0);
4881 %}
4882 %}
4884 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
4885 operand indIndexScaleOffset_win95_safe(eRegP_no_EBP reg, immI off, rRegI ireg, immI2 scale)
4886 %{
4887 match(AddP (AddP reg (LShiftI ireg scale)) off);
4889 op_cost(100);
4890 format %{"[$reg + $off + $ireg << $scale]" %}
4891 interface(MEMORY_INTER) %{
4892 base($reg);
4893 index($ireg);
4894 scale($scale);
4895 disp($off);
4896 %}
4897 %}
4899 //----------Conditional Branch Operands----------------------------------------
4900 // Comparison Op - This is the operation of the comparison, and is limited to
4901 // the following set of codes:
4902 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=)
4903 //
4904 // Other attributes of the comparison, such as unsignedness, are specified
4905 // by the comparison instruction that sets a condition code flags register.
4906 // That result is represented by a flags operand whose subtype is appropriate
4907 // to the unsignedness (etc.) of the comparison.
4908 //
4909 // Later, the instruction which matches both the Comparison Op (a Bool) and
4910 // the flags (produced by the Cmp) specifies the coding of the comparison op
4911 // by matching a specific subtype of Bool operand below, such as cmpOpU.
4913 // Comparision Code
4914 operand cmpOp() %{
4915 match(Bool);
4917 format %{ "" %}
4918 interface(COND_INTER) %{
4919 equal(0x4, "e");
4920 not_equal(0x5, "ne");
4921 less(0xC, "l");
4922 greater_equal(0xD, "ge");
4923 less_equal(0xE, "le");
4924 greater(0xF, "g");
4925 %}
4926 %}
4928 // Comparison Code, unsigned compare. Used by FP also, with
4929 // C2 (unordered) turned into GT or LT already. The other bits
4930 // C0 and C3 are turned into Carry & Zero flags.
4931 operand cmpOpU() %{
4932 match(Bool);
4934 format %{ "" %}
4935 interface(COND_INTER) %{
4936 equal(0x4, "e");
4937 not_equal(0x5, "ne");
4938 less(0x2, "b");
4939 greater_equal(0x3, "nb");
4940 less_equal(0x6, "be");
4941 greater(0x7, "nbe");
4942 %}
4943 %}
4945 // Floating comparisons that don't require any fixup for the unordered case
4946 operand cmpOpUCF() %{
4947 match(Bool);
4948 predicate(n->as_Bool()->_test._test == BoolTest::lt ||
4949 n->as_Bool()->_test._test == BoolTest::ge ||
4950 n->as_Bool()->_test._test == BoolTest::le ||
4951 n->as_Bool()->_test._test == BoolTest::gt);
4952 format %{ "" %}
4953 interface(COND_INTER) %{
4954 equal(0x4, "e");
4955 not_equal(0x5, "ne");
4956 less(0x2, "b");
4957 greater_equal(0x3, "nb");
4958 less_equal(0x6, "be");
4959 greater(0x7, "nbe");
4960 %}
4961 %}
4964 // Floating comparisons that can be fixed up with extra conditional jumps
4965 operand cmpOpUCF2() %{
4966 match(Bool);
4967 predicate(n->as_Bool()->_test._test == BoolTest::ne ||
4968 n->as_Bool()->_test._test == BoolTest::eq);
4969 format %{ "" %}
4970 interface(COND_INTER) %{
4971 equal(0x4, "e");
4972 not_equal(0x5, "ne");
4973 less(0x2, "b");
4974 greater_equal(0x3, "nb");
4975 less_equal(0x6, "be");
4976 greater(0x7, "nbe");
4977 %}
4978 %}
4980 // Comparison Code for FP conditional move
4981 operand cmpOp_fcmov() %{
4982 match(Bool);
4984 format %{ "" %}
4985 interface(COND_INTER) %{
4986 equal (0x0C8);
4987 not_equal (0x1C8);
4988 less (0x0C0);
4989 greater_equal(0x1C0);
4990 less_equal (0x0D0);
4991 greater (0x1D0);
4992 %}
4993 %}
4995 // Comparision Code used in long compares
4996 operand cmpOp_commute() %{
4997 match(Bool);
4999 format %{ "" %}
5000 interface(COND_INTER) %{
5001 equal(0x4, "e");
5002 not_equal(0x5, "ne");
5003 less(0xF, "g");
5004 greater_equal(0xE, "le");
5005 less_equal(0xD, "ge");
5006 greater(0xC, "l");
5007 %}
5008 %}
5010 //----------OPERAND CLASSES----------------------------------------------------
5011 // Operand Classes are groups of operands that are used as to simplify
5012 // instruction definitions by not requiring the AD writer to specify separate
5013 // instructions for every form of operand when the instruction accepts
5014 // multiple operand types with the same basic encoding and format. The classic
5015 // case of this is memory operands.
5017 opclass memory(direct, indirect, indOffset8, indOffset32, indOffset32X, indIndexOffset,
5018 indIndex, indIndexScale, indIndexScaleOffset);
5020 // Long memory operations are encoded in 2 instructions and a +4 offset.
5021 // This means some kind of offset is always required and you cannot use
5022 // an oop as the offset (done when working on static globals).
5023 opclass long_memory(direct, indirect, indOffset8, indOffset32, indIndexOffset,
5024 indIndex, indIndexScale, indIndexScaleOffset);
5027 //----------PIPELINE-----------------------------------------------------------
5028 // Rules which define the behavior of the target architectures pipeline.
5029 pipeline %{
5031 //----------ATTRIBUTES---------------------------------------------------------
5032 attributes %{
5033 variable_size_instructions; // Fixed size instructions
5034 max_instructions_per_bundle = 3; // Up to 3 instructions per bundle
5035 instruction_unit_size = 1; // An instruction is 1 bytes long
5036 instruction_fetch_unit_size = 16; // The processor fetches one line
5037 instruction_fetch_units = 1; // of 16 bytes
5039 // List of nop instructions
5040 nops( MachNop );
5041 %}
5043 //----------RESOURCES----------------------------------------------------------
5044 // Resources are the functional units available to the machine
5046 // Generic P2/P3 pipeline
5047 // 3 decoders, only D0 handles big operands; a "bundle" is the limit of
5048 // 3 instructions decoded per cycle.
5049 // 2 load/store ops per cycle, 1 branch, 1 FPU,
5050 // 2 ALU op, only ALU0 handles mul/div instructions.
5051 resources( D0, D1, D2, DECODE = D0 | D1 | D2,
5052 MS0, MS1, MEM = MS0 | MS1,
5053 BR, FPU,
5054 ALU0, ALU1, ALU = ALU0 | ALU1 );
5056 //----------PIPELINE DESCRIPTION-----------------------------------------------
5057 // Pipeline Description specifies the stages in the machine's pipeline
5059 // Generic P2/P3 pipeline
5060 pipe_desc(S0, S1, S2, S3, S4, S5);
5062 //----------PIPELINE CLASSES---------------------------------------------------
5063 // Pipeline Classes describe the stages in which input and output are
5064 // referenced by the hardware pipeline.
5066 // Naming convention: ialu or fpu
5067 // Then: _reg
5068 // Then: _reg if there is a 2nd register
5069 // Then: _long if it's a pair of instructions implementing a long
5070 // Then: _fat if it requires the big decoder
5071 // Or: _mem if it requires the big decoder and a memory unit.
5073 // Integer ALU reg operation
5074 pipe_class ialu_reg(rRegI dst) %{
5075 single_instruction;
5076 dst : S4(write);
5077 dst : S3(read);
5078 DECODE : S0; // any decoder
5079 ALU : S3; // any alu
5080 %}
5082 // Long ALU reg operation
5083 pipe_class ialu_reg_long(eRegL dst) %{
5084 instruction_count(2);
5085 dst : S4(write);
5086 dst : S3(read);
5087 DECODE : S0(2); // any 2 decoders
5088 ALU : S3(2); // both alus
5089 %}
5091 // Integer ALU reg operation using big decoder
5092 pipe_class ialu_reg_fat(rRegI dst) %{
5093 single_instruction;
5094 dst : S4(write);
5095 dst : S3(read);
5096 D0 : S0; // big decoder only
5097 ALU : S3; // any alu
5098 %}
5100 // Long ALU reg operation using big decoder
5101 pipe_class ialu_reg_long_fat(eRegL dst) %{
5102 instruction_count(2);
5103 dst : S4(write);
5104 dst : S3(read);
5105 D0 : S0(2); // big decoder only; twice
5106 ALU : S3(2); // any 2 alus
5107 %}
5109 // Integer ALU reg-reg operation
5110 pipe_class ialu_reg_reg(rRegI dst, rRegI src) %{
5111 single_instruction;
5112 dst : S4(write);
5113 src : S3(read);
5114 DECODE : S0; // any decoder
5115 ALU : S3; // any alu
5116 %}
5118 // Long ALU reg-reg operation
5119 pipe_class ialu_reg_reg_long(eRegL dst, eRegL src) %{
5120 instruction_count(2);
5121 dst : S4(write);
5122 src : S3(read);
5123 DECODE : S0(2); // any 2 decoders
5124 ALU : S3(2); // both alus
5125 %}
5127 // Integer ALU reg-reg operation
5128 pipe_class ialu_reg_reg_fat(rRegI dst, memory src) %{
5129 single_instruction;
5130 dst : S4(write);
5131 src : S3(read);
5132 D0 : S0; // big decoder only
5133 ALU : S3; // any alu
5134 %}
5136 // Long ALU reg-reg operation
5137 pipe_class ialu_reg_reg_long_fat(eRegL dst, eRegL src) %{
5138 instruction_count(2);
5139 dst : S4(write);
5140 src : S3(read);
5141 D0 : S0(2); // big decoder only; twice
5142 ALU : S3(2); // both alus
5143 %}
5145 // Integer ALU reg-mem operation
5146 pipe_class ialu_reg_mem(rRegI dst, memory mem) %{
5147 single_instruction;
5148 dst : S5(write);
5149 mem : S3(read);
5150 D0 : S0; // big decoder only
5151 ALU : S4; // any alu
5152 MEM : S3; // any mem
5153 %}
5155 // Long ALU reg-mem operation
5156 pipe_class ialu_reg_long_mem(eRegL dst, load_long_memory mem) %{
5157 instruction_count(2);
5158 dst : S5(write);
5159 mem : S3(read);
5160 D0 : S0(2); // big decoder only; twice
5161 ALU : S4(2); // any 2 alus
5162 MEM : S3(2); // both mems
5163 %}
5165 // Integer mem operation (prefetch)
5166 pipe_class ialu_mem(memory mem)
5167 %{
5168 single_instruction;
5169 mem : S3(read);
5170 D0 : S0; // big decoder only
5171 MEM : S3; // any mem
5172 %}
5174 // Integer Store to Memory
5175 pipe_class ialu_mem_reg(memory mem, rRegI src) %{
5176 single_instruction;
5177 mem : S3(read);
5178 src : S5(read);
5179 D0 : S0; // big decoder only
5180 ALU : S4; // any alu
5181 MEM : S3;
5182 %}
5184 // Long Store to Memory
5185 pipe_class ialu_mem_long_reg(memory mem, eRegL src) %{
5186 instruction_count(2);
5187 mem : S3(read);
5188 src : S5(read);
5189 D0 : S0(2); // big decoder only; twice
5190 ALU : S4(2); // any 2 alus
5191 MEM : S3(2); // Both mems
5192 %}
5194 // Integer Store to Memory
5195 pipe_class ialu_mem_imm(memory mem) %{
5196 single_instruction;
5197 mem : S3(read);
5198 D0 : S0; // big decoder only
5199 ALU : S4; // any alu
5200 MEM : S3;
5201 %}
5203 // Integer ALU0 reg-reg operation
5204 pipe_class ialu_reg_reg_alu0(rRegI dst, rRegI src) %{
5205 single_instruction;
5206 dst : S4(write);
5207 src : S3(read);
5208 D0 : S0; // Big decoder only
5209 ALU0 : S3; // only alu0
5210 %}
5212 // Integer ALU0 reg-mem operation
5213 pipe_class ialu_reg_mem_alu0(rRegI dst, memory mem) %{
5214 single_instruction;
5215 dst : S5(write);
5216 mem : S3(read);
5217 D0 : S0; // big decoder only
5218 ALU0 : S4; // ALU0 only
5219 MEM : S3; // any mem
5220 %}
5222 // Integer ALU reg-reg operation
5223 pipe_class ialu_cr_reg_reg(eFlagsReg cr, rRegI src1, rRegI src2) %{
5224 single_instruction;
5225 cr : S4(write);
5226 src1 : S3(read);
5227 src2 : S3(read);
5228 DECODE : S0; // any decoder
5229 ALU : S3; // any alu
5230 %}
5232 // Integer ALU reg-imm operation
5233 pipe_class ialu_cr_reg_imm(eFlagsReg cr, rRegI src1) %{
5234 single_instruction;
5235 cr : S4(write);
5236 src1 : S3(read);
5237 DECODE : S0; // any decoder
5238 ALU : S3; // any alu
5239 %}
5241 // Integer ALU reg-mem operation
5242 pipe_class ialu_cr_reg_mem(eFlagsReg cr, rRegI src1, memory src2) %{
5243 single_instruction;
5244 cr : S4(write);
5245 src1 : S3(read);
5246 src2 : S3(read);
5247 D0 : S0; // big decoder only
5248 ALU : S4; // any alu
5249 MEM : S3;
5250 %}
5252 // Conditional move reg-reg
5253 pipe_class pipe_cmplt( rRegI p, rRegI q, rRegI y ) %{
5254 instruction_count(4);
5255 y : S4(read);
5256 q : S3(read);
5257 p : S3(read);
5258 DECODE : S0(4); // any decoder
5259 %}
5261 // Conditional move reg-reg
5262 pipe_class pipe_cmov_reg( rRegI dst, rRegI src, eFlagsReg cr ) %{
5263 single_instruction;
5264 dst : S4(write);
5265 src : S3(read);
5266 cr : S3(read);
5267 DECODE : S0; // any decoder
5268 %}
5270 // Conditional move reg-mem
5271 pipe_class pipe_cmov_mem( eFlagsReg cr, rRegI dst, memory src) %{
5272 single_instruction;
5273 dst : S4(write);
5274 src : S3(read);
5275 cr : S3(read);
5276 DECODE : S0; // any decoder
5277 MEM : S3;
5278 %}
5280 // Conditional move reg-reg long
5281 pipe_class pipe_cmov_reg_long( eFlagsReg cr, eRegL dst, eRegL src) %{
5282 single_instruction;
5283 dst : S4(write);
5284 src : S3(read);
5285 cr : S3(read);
5286 DECODE : S0(2); // any 2 decoders
5287 %}
5289 // Conditional move double reg-reg
5290 pipe_class pipe_cmovDPR_reg( eFlagsReg cr, regDPR1 dst, regDPR src) %{
5291 single_instruction;
5292 dst : S4(write);
5293 src : S3(read);
5294 cr : S3(read);
5295 DECODE : S0; // any decoder
5296 %}
5298 // Float reg-reg operation
5299 pipe_class fpu_reg(regDPR dst) %{
5300 instruction_count(2);
5301 dst : S3(read);
5302 DECODE : S0(2); // any 2 decoders
5303 FPU : S3;
5304 %}
5306 // Float reg-reg operation
5307 pipe_class fpu_reg_reg(regDPR dst, regDPR src) %{
5308 instruction_count(2);
5309 dst : S4(write);
5310 src : S3(read);
5311 DECODE : S0(2); // any 2 decoders
5312 FPU : S3;
5313 %}
5315 // Float reg-reg operation
5316 pipe_class fpu_reg_reg_reg(regDPR dst, regDPR src1, regDPR src2) %{
5317 instruction_count(3);
5318 dst : S4(write);
5319 src1 : S3(read);
5320 src2 : S3(read);
5321 DECODE : S0(3); // any 3 decoders
5322 FPU : S3(2);
5323 %}
5325 // Float reg-reg operation
5326 pipe_class fpu_reg_reg_reg_reg(regDPR dst, regDPR src1, regDPR src2, regDPR src3) %{
5327 instruction_count(4);
5328 dst : S4(write);
5329 src1 : S3(read);
5330 src2 : S3(read);
5331 src3 : S3(read);
5332 DECODE : S0(4); // any 3 decoders
5333 FPU : S3(2);
5334 %}
5336 // Float reg-reg operation
5337 pipe_class fpu_reg_mem_reg_reg(regDPR dst, memory src1, regDPR src2, regDPR src3) %{
5338 instruction_count(4);
5339 dst : S4(write);
5340 src1 : S3(read);
5341 src2 : S3(read);
5342 src3 : S3(read);
5343 DECODE : S1(3); // any 3 decoders
5344 D0 : S0; // Big decoder only
5345 FPU : S3(2);
5346 MEM : S3;
5347 %}
5349 // Float reg-mem operation
5350 pipe_class fpu_reg_mem(regDPR dst, memory mem) %{
5351 instruction_count(2);
5352 dst : S5(write);
5353 mem : S3(read);
5354 D0 : S0; // big decoder only
5355 DECODE : S1; // any decoder for FPU POP
5356 FPU : S4;
5357 MEM : S3; // any mem
5358 %}
5360 // Float reg-mem operation
5361 pipe_class fpu_reg_reg_mem(regDPR dst, regDPR src1, memory mem) %{
5362 instruction_count(3);
5363 dst : S5(write);
5364 src1 : S3(read);
5365 mem : S3(read);
5366 D0 : S0; // big decoder only
5367 DECODE : S1(2); // any decoder for FPU POP
5368 FPU : S4;
5369 MEM : S3; // any mem
5370 %}
5372 // Float mem-reg operation
5373 pipe_class fpu_mem_reg(memory mem, regDPR src) %{
5374 instruction_count(2);
5375 src : S5(read);
5376 mem : S3(read);
5377 DECODE : S0; // any decoder for FPU PUSH
5378 D0 : S1; // big decoder only
5379 FPU : S4;
5380 MEM : S3; // any mem
5381 %}
5383 pipe_class fpu_mem_reg_reg(memory mem, regDPR src1, regDPR src2) %{
5384 instruction_count(3);
5385 src1 : S3(read);
5386 src2 : S3(read);
5387 mem : S3(read);
5388 DECODE : S0(2); // any decoder for FPU PUSH
5389 D0 : S1; // big decoder only
5390 FPU : S4;
5391 MEM : S3; // any mem
5392 %}
5394 pipe_class fpu_mem_reg_mem(memory mem, regDPR src1, memory src2) %{
5395 instruction_count(3);
5396 src1 : S3(read);
5397 src2 : S3(read);
5398 mem : S4(read);
5399 DECODE : S0; // any decoder for FPU PUSH
5400 D0 : S0(2); // big decoder only
5401 FPU : S4;
5402 MEM : S3(2); // any mem
5403 %}
5405 pipe_class fpu_mem_mem(memory dst, memory src1) %{
5406 instruction_count(2);
5407 src1 : S3(read);
5408 dst : S4(read);
5409 D0 : S0(2); // big decoder only
5410 MEM : S3(2); // any mem
5411 %}
5413 pipe_class fpu_mem_mem_mem(memory dst, memory src1, memory src2) %{
5414 instruction_count(3);
5415 src1 : S3(read);
5416 src2 : S3(read);
5417 dst : S4(read);
5418 D0 : S0(3); // big decoder only
5419 FPU : S4;
5420 MEM : S3(3); // any mem
5421 %}
5423 pipe_class fpu_mem_reg_con(memory mem, regDPR src1) %{
5424 instruction_count(3);
5425 src1 : S4(read);
5426 mem : S4(read);
5427 DECODE : S0; // any decoder for FPU PUSH
5428 D0 : S0(2); // big decoder only
5429 FPU : S4;
5430 MEM : S3(2); // any mem
5431 %}
5433 // Float load constant
5434 pipe_class fpu_reg_con(regDPR dst) %{
5435 instruction_count(2);
5436 dst : S5(write);
5437 D0 : S0; // big decoder only for the load
5438 DECODE : S1; // any decoder for FPU POP
5439 FPU : S4;
5440 MEM : S3; // any mem
5441 %}
5443 // Float load constant
5444 pipe_class fpu_reg_reg_con(regDPR dst, regDPR src) %{
5445 instruction_count(3);
5446 dst : S5(write);
5447 src : S3(read);
5448 D0 : S0; // big decoder only for the load
5449 DECODE : S1(2); // any decoder for FPU POP
5450 FPU : S4;
5451 MEM : S3; // any mem
5452 %}
5454 // UnConditional branch
5455 pipe_class pipe_jmp( label labl ) %{
5456 single_instruction;
5457 BR : S3;
5458 %}
5460 // Conditional branch
5461 pipe_class pipe_jcc( cmpOp cmp, eFlagsReg cr, label labl ) %{
5462 single_instruction;
5463 cr : S1(read);
5464 BR : S3;
5465 %}
5467 // Allocation idiom
5468 pipe_class pipe_cmpxchg( eRegP dst, eRegP heap_ptr ) %{
5469 instruction_count(1); force_serialization;
5470 fixed_latency(6);
5471 heap_ptr : S3(read);
5472 DECODE : S0(3);
5473 D0 : S2;
5474 MEM : S3;
5475 ALU : S3(2);
5476 dst : S5(write);
5477 BR : S5;
5478 %}
5480 // Generic big/slow expanded idiom
5481 pipe_class pipe_slow( ) %{
5482 instruction_count(10); multiple_bundles; force_serialization;
5483 fixed_latency(100);
5484 D0 : S0(2);
5485 MEM : S3(2);
5486 %}
5488 // The real do-nothing guy
5489 pipe_class empty( ) %{
5490 instruction_count(0);
5491 %}
5493 // Define the class for the Nop node
5494 define %{
5495 MachNop = empty;
5496 %}
5498 %}
5500 //----------INSTRUCTIONS-------------------------------------------------------
5501 //
5502 // match -- States which machine-independent subtree may be replaced
5503 // by this instruction.
5504 // ins_cost -- The estimated cost of this instruction is used by instruction
5505 // selection to identify a minimum cost tree of machine
5506 // instructions that matches a tree of machine-independent
5507 // instructions.
5508 // format -- A string providing the disassembly for this instruction.
5509 // The value of an instruction's operand may be inserted
5510 // by referring to it with a '$' prefix.
5511 // opcode -- Three instruction opcodes may be provided. These are referred
5512 // to within an encode class as $primary, $secondary, and $tertiary
5513 // respectively. The primary opcode is commonly used to
5514 // indicate the type of machine instruction, while secondary
5515 // and tertiary are often used for prefix options or addressing
5516 // modes.
5517 // ins_encode -- A list of encode classes with parameters. The encode class
5518 // name must have been defined in an 'enc_class' specification
5519 // in the encode section of the architecture description.
5521 //----------BSWAP-Instruction--------------------------------------------------
5522 instruct bytes_reverse_int(rRegI dst) %{
5523 match(Set dst (ReverseBytesI dst));
5525 format %{ "BSWAP $dst" %}
5526 opcode(0x0F, 0xC8);
5527 ins_encode( OpcP, OpcSReg(dst) );
5528 ins_pipe( ialu_reg );
5529 %}
5531 instruct bytes_reverse_long(eRegL dst) %{
5532 match(Set dst (ReverseBytesL dst));
5534 format %{ "BSWAP $dst.lo\n\t"
5535 "BSWAP $dst.hi\n\t"
5536 "XCHG $dst.lo $dst.hi" %}
5538 ins_cost(125);
5539 ins_encode( bswap_long_bytes(dst) );
5540 ins_pipe( ialu_reg_reg);
5541 %}
5543 instruct bytes_reverse_unsigned_short(rRegI dst, eFlagsReg cr) %{
5544 match(Set dst (ReverseBytesUS dst));
5545 effect(KILL cr);
5547 format %{ "BSWAP $dst\n\t"
5548 "SHR $dst,16\n\t" %}
5549 ins_encode %{
5550 __ bswapl($dst$$Register);
5551 __ shrl($dst$$Register, 16);
5552 %}
5553 ins_pipe( ialu_reg );
5554 %}
5556 instruct bytes_reverse_short(rRegI dst, eFlagsReg cr) %{
5557 match(Set dst (ReverseBytesS dst));
5558 effect(KILL cr);
5560 format %{ "BSWAP $dst\n\t"
5561 "SAR $dst,16\n\t" %}
5562 ins_encode %{
5563 __ bswapl($dst$$Register);
5564 __ sarl($dst$$Register, 16);
5565 %}
5566 ins_pipe( ialu_reg );
5567 %}
5570 //---------- Zeros Count Instructions ------------------------------------------
5572 instruct countLeadingZerosI(rRegI dst, rRegI src, eFlagsReg cr) %{
5573 predicate(UseCountLeadingZerosInstruction);
5574 match(Set dst (CountLeadingZerosI src));
5575 effect(KILL cr);
5577 format %{ "LZCNT $dst, $src\t# count leading zeros (int)" %}
5578 ins_encode %{
5579 __ lzcntl($dst$$Register, $src$$Register);
5580 %}
5581 ins_pipe(ialu_reg);
5582 %}
5584 instruct countLeadingZerosI_bsr(rRegI dst, rRegI src, eFlagsReg cr) %{
5585 predicate(!UseCountLeadingZerosInstruction);
5586 match(Set dst (CountLeadingZerosI src));
5587 effect(KILL cr);
5589 format %{ "BSR $dst, $src\t# count leading zeros (int)\n\t"
5590 "JNZ skip\n\t"
5591 "MOV $dst, -1\n"
5592 "skip:\n\t"
5593 "NEG $dst\n\t"
5594 "ADD $dst, 31" %}
5595 ins_encode %{
5596 Register Rdst = $dst$$Register;
5597 Register Rsrc = $src$$Register;
5598 Label skip;
5599 __ bsrl(Rdst, Rsrc);
5600 __ jccb(Assembler::notZero, skip);
5601 __ movl(Rdst, -1);
5602 __ bind(skip);
5603 __ negl(Rdst);
5604 __ addl(Rdst, BitsPerInt - 1);
5605 %}
5606 ins_pipe(ialu_reg);
5607 %}
5609 instruct countLeadingZerosL(rRegI dst, eRegL src, eFlagsReg cr) %{
5610 predicate(UseCountLeadingZerosInstruction);
5611 match(Set dst (CountLeadingZerosL src));
5612 effect(TEMP dst, KILL cr);
5614 format %{ "LZCNT $dst, $src.hi\t# count leading zeros (long)\n\t"
5615 "JNC done\n\t"
5616 "LZCNT $dst, $src.lo\n\t"
5617 "ADD $dst, 32\n"
5618 "done:" %}
5619 ins_encode %{
5620 Register Rdst = $dst$$Register;
5621 Register Rsrc = $src$$Register;
5622 Label done;
5623 __ lzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
5624 __ jccb(Assembler::carryClear, done);
5625 __ lzcntl(Rdst, Rsrc);
5626 __ addl(Rdst, BitsPerInt);
5627 __ bind(done);
5628 %}
5629 ins_pipe(ialu_reg);
5630 %}
5632 instruct countLeadingZerosL_bsr(rRegI dst, eRegL src, eFlagsReg cr) %{
5633 predicate(!UseCountLeadingZerosInstruction);
5634 match(Set dst (CountLeadingZerosL src));
5635 effect(TEMP dst, KILL cr);
5637 format %{ "BSR $dst, $src.hi\t# count leading zeros (long)\n\t"
5638 "JZ msw_is_zero\n\t"
5639 "ADD $dst, 32\n\t"
5640 "JMP not_zero\n"
5641 "msw_is_zero:\n\t"
5642 "BSR $dst, $src.lo\n\t"
5643 "JNZ not_zero\n\t"
5644 "MOV $dst, -1\n"
5645 "not_zero:\n\t"
5646 "NEG $dst\n\t"
5647 "ADD $dst, 63\n" %}
5648 ins_encode %{
5649 Register Rdst = $dst$$Register;
5650 Register Rsrc = $src$$Register;
5651 Label msw_is_zero;
5652 Label not_zero;
5653 __ bsrl(Rdst, HIGH_FROM_LOW(Rsrc));
5654 __ jccb(Assembler::zero, msw_is_zero);
5655 __ addl(Rdst, BitsPerInt);
5656 __ jmpb(not_zero);
5657 __ bind(msw_is_zero);
5658 __ bsrl(Rdst, Rsrc);
5659 __ jccb(Assembler::notZero, not_zero);
5660 __ movl(Rdst, -1);
5661 __ bind(not_zero);
5662 __ negl(Rdst);
5663 __ addl(Rdst, BitsPerLong - 1);
5664 %}
5665 ins_pipe(ialu_reg);
5666 %}
5668 instruct countTrailingZerosI(rRegI dst, rRegI src, eFlagsReg cr) %{
5669 match(Set dst (CountTrailingZerosI src));
5670 effect(KILL cr);
5672 format %{ "BSF $dst, $src\t# count trailing zeros (int)\n\t"
5673 "JNZ done\n\t"
5674 "MOV $dst, 32\n"
5675 "done:" %}
5676 ins_encode %{
5677 Register Rdst = $dst$$Register;
5678 Label done;
5679 __ bsfl(Rdst, $src$$Register);
5680 __ jccb(Assembler::notZero, done);
5681 __ movl(Rdst, BitsPerInt);
5682 __ bind(done);
5683 %}
5684 ins_pipe(ialu_reg);
5685 %}
5687 instruct countTrailingZerosL(rRegI dst, eRegL src, eFlagsReg cr) %{
5688 match(Set dst (CountTrailingZerosL src));
5689 effect(TEMP dst, KILL cr);
5691 format %{ "BSF $dst, $src.lo\t# count trailing zeros (long)\n\t"
5692 "JNZ done\n\t"
5693 "BSF $dst, $src.hi\n\t"
5694 "JNZ msw_not_zero\n\t"
5695 "MOV $dst, 32\n"
5696 "msw_not_zero:\n\t"
5697 "ADD $dst, 32\n"
5698 "done:" %}
5699 ins_encode %{
5700 Register Rdst = $dst$$Register;
5701 Register Rsrc = $src$$Register;
5702 Label msw_not_zero;
5703 Label done;
5704 __ bsfl(Rdst, Rsrc);
5705 __ jccb(Assembler::notZero, done);
5706 __ bsfl(Rdst, HIGH_FROM_LOW(Rsrc));
5707 __ jccb(Assembler::notZero, msw_not_zero);
5708 __ movl(Rdst, BitsPerInt);
5709 __ bind(msw_not_zero);
5710 __ addl(Rdst, BitsPerInt);
5711 __ bind(done);
5712 %}
5713 ins_pipe(ialu_reg);
5714 %}
5717 //---------- Population Count Instructions -------------------------------------
5719 instruct popCountI(rRegI dst, rRegI src, eFlagsReg cr) %{
5720 predicate(UsePopCountInstruction);
5721 match(Set dst (PopCountI src));
5722 effect(KILL cr);
5724 format %{ "POPCNT $dst, $src" %}
5725 ins_encode %{
5726 __ popcntl($dst$$Register, $src$$Register);
5727 %}
5728 ins_pipe(ialu_reg);
5729 %}
5731 instruct popCountI_mem(rRegI dst, memory mem, eFlagsReg cr) %{
5732 predicate(UsePopCountInstruction);
5733 match(Set dst (PopCountI (LoadI mem)));
5734 effect(KILL cr);
5736 format %{ "POPCNT $dst, $mem" %}
5737 ins_encode %{
5738 __ popcntl($dst$$Register, $mem$$Address);
5739 %}
5740 ins_pipe(ialu_reg);
5741 %}
5743 // Note: Long.bitCount(long) returns an int.
5744 instruct popCountL(rRegI dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
5745 predicate(UsePopCountInstruction);
5746 match(Set dst (PopCountL src));
5747 effect(KILL cr, TEMP tmp, TEMP dst);
5749 format %{ "POPCNT $dst, $src.lo\n\t"
5750 "POPCNT $tmp, $src.hi\n\t"
5751 "ADD $dst, $tmp" %}
5752 ins_encode %{
5753 __ popcntl($dst$$Register, $src$$Register);
5754 __ popcntl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
5755 __ addl($dst$$Register, $tmp$$Register);
5756 %}
5757 ins_pipe(ialu_reg);
5758 %}
5760 // Note: Long.bitCount(long) returns an int.
5761 instruct popCountL_mem(rRegI dst, memory mem, rRegI tmp, eFlagsReg cr) %{
5762 predicate(UsePopCountInstruction);
5763 match(Set dst (PopCountL (LoadL mem)));
5764 effect(KILL cr, TEMP tmp, TEMP dst);
5766 format %{ "POPCNT $dst, $mem\n\t"
5767 "POPCNT $tmp, $mem+4\n\t"
5768 "ADD $dst, $tmp" %}
5769 ins_encode %{
5770 //__ popcntl($dst$$Register, $mem$$Address$$first);
5771 //__ popcntl($tmp$$Register, $mem$$Address$$second);
5772 __ popcntl($dst$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, relocInfo::none));
5773 __ popcntl($tmp$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, relocInfo::none));
5774 __ addl($dst$$Register, $tmp$$Register);
5775 %}
5776 ins_pipe(ialu_reg);
5777 %}
5780 //----------Load/Store/Move Instructions---------------------------------------
5781 //----------Load Instructions--------------------------------------------------
5782 // Load Byte (8bit signed)
5783 instruct loadB(xRegI dst, memory mem) %{
5784 match(Set dst (LoadB mem));
5786 ins_cost(125);
5787 format %{ "MOVSX8 $dst,$mem\t# byte" %}
5789 ins_encode %{
5790 __ movsbl($dst$$Register, $mem$$Address);
5791 %}
5793 ins_pipe(ialu_reg_mem);
5794 %}
5796 // Load Byte (8bit signed) into Long Register
5797 instruct loadB2L(eRegL dst, memory mem, eFlagsReg cr) %{
5798 match(Set dst (ConvI2L (LoadB mem)));
5799 effect(KILL cr);
5801 ins_cost(375);
5802 format %{ "MOVSX8 $dst.lo,$mem\t# byte -> long\n\t"
5803 "MOV $dst.hi,$dst.lo\n\t"
5804 "SAR $dst.hi,7" %}
5806 ins_encode %{
5807 __ movsbl($dst$$Register, $mem$$Address);
5808 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
5809 __ sarl(HIGH_FROM_LOW($dst$$Register), 7); // 24+1 MSB are already signed extended.
5810 %}
5812 ins_pipe(ialu_reg_mem);
5813 %}
5815 // Load Unsigned Byte (8bit UNsigned)
5816 instruct loadUB(xRegI dst, memory mem) %{
5817 match(Set dst (LoadUB mem));
5819 ins_cost(125);
5820 format %{ "MOVZX8 $dst,$mem\t# ubyte -> int" %}
5822 ins_encode %{
5823 __ movzbl($dst$$Register, $mem$$Address);
5824 %}
5826 ins_pipe(ialu_reg_mem);
5827 %}
5829 // Load Unsigned Byte (8 bit UNsigned) into Long Register
5830 instruct loadUB2L(eRegL dst, memory mem, eFlagsReg cr) %{
5831 match(Set dst (ConvI2L (LoadUB mem)));
5832 effect(KILL cr);
5834 ins_cost(250);
5835 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte -> long\n\t"
5836 "XOR $dst.hi,$dst.hi" %}
5838 ins_encode %{
5839 Register Rdst = $dst$$Register;
5840 __ movzbl(Rdst, $mem$$Address);
5841 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5842 %}
5844 ins_pipe(ialu_reg_mem);
5845 %}
5847 // Load Unsigned Byte (8 bit UNsigned) with mask into Long Register
5848 instruct loadUB2L_immI8(eRegL dst, memory mem, immI8 mask, eFlagsReg cr) %{
5849 match(Set dst (ConvI2L (AndI (LoadUB mem) mask)));
5850 effect(KILL cr);
5852 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte & 8-bit mask -> long\n\t"
5853 "XOR $dst.hi,$dst.hi\n\t"
5854 "AND $dst.lo,$mask" %}
5855 ins_encode %{
5856 Register Rdst = $dst$$Register;
5857 __ movzbl(Rdst, $mem$$Address);
5858 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5859 __ andl(Rdst, $mask$$constant);
5860 %}
5861 ins_pipe(ialu_reg_mem);
5862 %}
5864 // Load Short (16bit signed)
5865 instruct loadS(rRegI dst, memory mem) %{
5866 match(Set dst (LoadS mem));
5868 ins_cost(125);
5869 format %{ "MOVSX $dst,$mem\t# short" %}
5871 ins_encode %{
5872 __ movswl($dst$$Register, $mem$$Address);
5873 %}
5875 ins_pipe(ialu_reg_mem);
5876 %}
5878 // Load Short (16 bit signed) to Byte (8 bit signed)
5879 instruct loadS2B(rRegI dst, memory mem, immI_24 twentyfour) %{
5880 match(Set dst (RShiftI (LShiftI (LoadS mem) twentyfour) twentyfour));
5882 ins_cost(125);
5883 format %{ "MOVSX $dst, $mem\t# short -> byte" %}
5884 ins_encode %{
5885 __ movsbl($dst$$Register, $mem$$Address);
5886 %}
5887 ins_pipe(ialu_reg_mem);
5888 %}
5890 // Load Short (16bit signed) into Long Register
5891 instruct loadS2L(eRegL dst, memory mem, eFlagsReg cr) %{
5892 match(Set dst (ConvI2L (LoadS mem)));
5893 effect(KILL cr);
5895 ins_cost(375);
5896 format %{ "MOVSX $dst.lo,$mem\t# short -> long\n\t"
5897 "MOV $dst.hi,$dst.lo\n\t"
5898 "SAR $dst.hi,15" %}
5900 ins_encode %{
5901 __ movswl($dst$$Register, $mem$$Address);
5902 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
5903 __ sarl(HIGH_FROM_LOW($dst$$Register), 15); // 16+1 MSB are already signed extended.
5904 %}
5906 ins_pipe(ialu_reg_mem);
5907 %}
5909 // Load Unsigned Short/Char (16bit unsigned)
5910 instruct loadUS(rRegI dst, memory mem) %{
5911 match(Set dst (LoadUS mem));
5913 ins_cost(125);
5914 format %{ "MOVZX $dst,$mem\t# ushort/char -> int" %}
5916 ins_encode %{
5917 __ movzwl($dst$$Register, $mem$$Address);
5918 %}
5920 ins_pipe(ialu_reg_mem);
5921 %}
5923 // Load Unsigned Short/Char (16 bit UNsigned) to Byte (8 bit signed)
5924 instruct loadUS2B(rRegI dst, memory mem, immI_24 twentyfour) %{
5925 match(Set dst (RShiftI (LShiftI (LoadUS mem) twentyfour) twentyfour));
5927 ins_cost(125);
5928 format %{ "MOVSX $dst, $mem\t# ushort -> byte" %}
5929 ins_encode %{
5930 __ movsbl($dst$$Register, $mem$$Address);
5931 %}
5932 ins_pipe(ialu_reg_mem);
5933 %}
5935 // Load Unsigned Short/Char (16 bit UNsigned) into Long Register
5936 instruct loadUS2L(eRegL dst, memory mem, eFlagsReg cr) %{
5937 match(Set dst (ConvI2L (LoadUS mem)));
5938 effect(KILL cr);
5940 ins_cost(250);
5941 format %{ "MOVZX $dst.lo,$mem\t# ushort/char -> long\n\t"
5942 "XOR $dst.hi,$dst.hi" %}
5944 ins_encode %{
5945 __ movzwl($dst$$Register, $mem$$Address);
5946 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
5947 %}
5949 ins_pipe(ialu_reg_mem);
5950 %}
5952 // Load Unsigned Short/Char (16 bit UNsigned) with mask 0xFF into Long Register
5953 instruct loadUS2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
5954 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
5955 effect(KILL cr);
5957 format %{ "MOVZX8 $dst.lo,$mem\t# ushort/char & 0xFF -> long\n\t"
5958 "XOR $dst.hi,$dst.hi" %}
5959 ins_encode %{
5960 Register Rdst = $dst$$Register;
5961 __ movzbl(Rdst, $mem$$Address);
5962 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5963 %}
5964 ins_pipe(ialu_reg_mem);
5965 %}
5967 // Load Unsigned Short/Char (16 bit UNsigned) with a 16-bit mask into Long Register
5968 instruct loadUS2L_immI16(eRegL dst, memory mem, immI16 mask, eFlagsReg cr) %{
5969 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
5970 effect(KILL cr);
5972 format %{ "MOVZX $dst.lo, $mem\t# ushort/char & 16-bit mask -> long\n\t"
5973 "XOR $dst.hi,$dst.hi\n\t"
5974 "AND $dst.lo,$mask" %}
5975 ins_encode %{
5976 Register Rdst = $dst$$Register;
5977 __ movzwl(Rdst, $mem$$Address);
5978 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5979 __ andl(Rdst, $mask$$constant);
5980 %}
5981 ins_pipe(ialu_reg_mem);
5982 %}
5984 // Load Integer
5985 instruct loadI(rRegI dst, memory mem) %{
5986 match(Set dst (LoadI mem));
5988 ins_cost(125);
5989 format %{ "MOV $dst,$mem\t# int" %}
5991 ins_encode %{
5992 __ movl($dst$$Register, $mem$$Address);
5993 %}
5995 ins_pipe(ialu_reg_mem);
5996 %}
5998 // Load Integer (32 bit signed) to Byte (8 bit signed)
5999 instruct loadI2B(rRegI dst, memory mem, immI_24 twentyfour) %{
6000 match(Set dst (RShiftI (LShiftI (LoadI mem) twentyfour) twentyfour));
6002 ins_cost(125);
6003 format %{ "MOVSX $dst, $mem\t# int -> byte" %}
6004 ins_encode %{
6005 __ movsbl($dst$$Register, $mem$$Address);
6006 %}
6007 ins_pipe(ialu_reg_mem);
6008 %}
6010 // Load Integer (32 bit signed) to Unsigned Byte (8 bit UNsigned)
6011 instruct loadI2UB(rRegI dst, memory mem, immI_255 mask) %{
6012 match(Set dst (AndI (LoadI mem) mask));
6014 ins_cost(125);
6015 format %{ "MOVZX $dst, $mem\t# int -> ubyte" %}
6016 ins_encode %{
6017 __ movzbl($dst$$Register, $mem$$Address);
6018 %}
6019 ins_pipe(ialu_reg_mem);
6020 %}
6022 // Load Integer (32 bit signed) to Short (16 bit signed)
6023 instruct loadI2S(rRegI dst, memory mem, immI_16 sixteen) %{
6024 match(Set dst (RShiftI (LShiftI (LoadI mem) sixteen) sixteen));
6026 ins_cost(125);
6027 format %{ "MOVSX $dst, $mem\t# int -> short" %}
6028 ins_encode %{
6029 __ movswl($dst$$Register, $mem$$Address);
6030 %}
6031 ins_pipe(ialu_reg_mem);
6032 %}
6034 // Load Integer (32 bit signed) to Unsigned Short/Char (16 bit UNsigned)
6035 instruct loadI2US(rRegI dst, memory mem, immI_65535 mask) %{
6036 match(Set dst (AndI (LoadI mem) mask));
6038 ins_cost(125);
6039 format %{ "MOVZX $dst, $mem\t# int -> ushort/char" %}
6040 ins_encode %{
6041 __ movzwl($dst$$Register, $mem$$Address);
6042 %}
6043 ins_pipe(ialu_reg_mem);
6044 %}
6046 // Load Integer into Long Register
6047 instruct loadI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6048 match(Set dst (ConvI2L (LoadI mem)));
6049 effect(KILL cr);
6051 ins_cost(375);
6052 format %{ "MOV $dst.lo,$mem\t# int -> long\n\t"
6053 "MOV $dst.hi,$dst.lo\n\t"
6054 "SAR $dst.hi,31" %}
6056 ins_encode %{
6057 __ movl($dst$$Register, $mem$$Address);
6058 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6059 __ sarl(HIGH_FROM_LOW($dst$$Register), 31);
6060 %}
6062 ins_pipe(ialu_reg_mem);
6063 %}
6065 // Load Integer with mask 0xFF into Long Register
6066 instruct loadI2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6067 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6068 effect(KILL cr);
6070 format %{ "MOVZX8 $dst.lo,$mem\t# int & 0xFF -> long\n\t"
6071 "XOR $dst.hi,$dst.hi" %}
6072 ins_encode %{
6073 Register Rdst = $dst$$Register;
6074 __ movzbl(Rdst, $mem$$Address);
6075 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6076 %}
6077 ins_pipe(ialu_reg_mem);
6078 %}
6080 // Load Integer with mask 0xFFFF into Long Register
6081 instruct loadI2L_immI_65535(eRegL dst, memory mem, immI_65535 mask, eFlagsReg cr) %{
6082 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6083 effect(KILL cr);
6085 format %{ "MOVZX $dst.lo,$mem\t# int & 0xFFFF -> long\n\t"
6086 "XOR $dst.hi,$dst.hi" %}
6087 ins_encode %{
6088 Register Rdst = $dst$$Register;
6089 __ movzwl(Rdst, $mem$$Address);
6090 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6091 %}
6092 ins_pipe(ialu_reg_mem);
6093 %}
6095 // Load Integer with 32-bit mask into Long Register
6096 instruct loadI2L_immI(eRegL dst, memory mem, immI mask, eFlagsReg cr) %{
6097 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6098 effect(KILL cr);
6100 format %{ "MOV $dst.lo,$mem\t# int & 32-bit mask -> long\n\t"
6101 "XOR $dst.hi,$dst.hi\n\t"
6102 "AND $dst.lo,$mask" %}
6103 ins_encode %{
6104 Register Rdst = $dst$$Register;
6105 __ movl(Rdst, $mem$$Address);
6106 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6107 __ andl(Rdst, $mask$$constant);
6108 %}
6109 ins_pipe(ialu_reg_mem);
6110 %}
6112 // Load Unsigned Integer into Long Register
6113 instruct loadUI2L(eRegL dst, memory mem, immL_32bits mask, eFlagsReg cr) %{
6114 match(Set dst (AndL (ConvI2L (LoadI mem)) mask));
6115 effect(KILL cr);
6117 ins_cost(250);
6118 format %{ "MOV $dst.lo,$mem\t# uint -> long\n\t"
6119 "XOR $dst.hi,$dst.hi" %}
6121 ins_encode %{
6122 __ movl($dst$$Register, $mem$$Address);
6123 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6124 %}
6126 ins_pipe(ialu_reg_mem);
6127 %}
6129 // Load Long. Cannot clobber address while loading, so restrict address
6130 // register to ESI
6131 instruct loadL(eRegL dst, load_long_memory mem) %{
6132 predicate(!((LoadLNode*)n)->require_atomic_access());
6133 match(Set dst (LoadL mem));
6135 ins_cost(250);
6136 format %{ "MOV $dst.lo,$mem\t# long\n\t"
6137 "MOV $dst.hi,$mem+4" %}
6139 ins_encode %{
6140 Address Amemlo = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, relocInfo::none);
6141 Address Amemhi = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, relocInfo::none);
6142 __ movl($dst$$Register, Amemlo);
6143 __ movl(HIGH_FROM_LOW($dst$$Register), Amemhi);
6144 %}
6146 ins_pipe(ialu_reg_long_mem);
6147 %}
6149 // Volatile Load Long. Must be atomic, so do 64-bit FILD
6150 // then store it down to the stack and reload on the int
6151 // side.
6152 instruct loadL_volatile(stackSlotL dst, memory mem) %{
6153 predicate(UseSSE<=1 && ((LoadLNode*)n)->require_atomic_access());
6154 match(Set dst (LoadL mem));
6156 ins_cost(200);
6157 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
6158 "FISTp $dst" %}
6159 ins_encode(enc_loadL_volatile(mem,dst));
6160 ins_pipe( fpu_reg_mem );
6161 %}
6163 instruct loadLX_volatile(stackSlotL dst, memory mem, regD tmp) %{
6164 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6165 match(Set dst (LoadL mem));
6166 effect(TEMP tmp);
6167 ins_cost(180);
6168 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6169 "MOVSD $dst,$tmp" %}
6170 ins_encode %{
6171 __ movdbl($tmp$$XMMRegister, $mem$$Address);
6172 __ movdbl(Address(rsp, $dst$$disp), $tmp$$XMMRegister);
6173 %}
6174 ins_pipe( pipe_slow );
6175 %}
6177 instruct loadLX_reg_volatile(eRegL dst, memory mem, regD tmp) %{
6178 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6179 match(Set dst (LoadL mem));
6180 effect(TEMP tmp);
6181 ins_cost(160);
6182 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6183 "MOVD $dst.lo,$tmp\n\t"
6184 "PSRLQ $tmp,32\n\t"
6185 "MOVD $dst.hi,$tmp" %}
6186 ins_encode %{
6187 __ movdbl($tmp$$XMMRegister, $mem$$Address);
6188 __ movdl($dst$$Register, $tmp$$XMMRegister);
6189 __ psrlq($tmp$$XMMRegister, 32);
6190 __ movdl(HIGH_FROM_LOW($dst$$Register), $tmp$$XMMRegister);
6191 %}
6192 ins_pipe( pipe_slow );
6193 %}
6195 // Load Range
6196 instruct loadRange(rRegI dst, memory mem) %{
6197 match(Set dst (LoadRange mem));
6199 ins_cost(125);
6200 format %{ "MOV $dst,$mem" %}
6201 opcode(0x8B);
6202 ins_encode( OpcP, RegMem(dst,mem));
6203 ins_pipe( ialu_reg_mem );
6204 %}
6207 // Load Pointer
6208 instruct loadP(eRegP dst, memory mem) %{
6209 match(Set dst (LoadP mem));
6211 ins_cost(125);
6212 format %{ "MOV $dst,$mem" %}
6213 opcode(0x8B);
6214 ins_encode( OpcP, RegMem(dst,mem));
6215 ins_pipe( ialu_reg_mem );
6216 %}
6218 // Load Klass Pointer
6219 instruct loadKlass(eRegP dst, memory mem) %{
6220 match(Set dst (LoadKlass mem));
6222 ins_cost(125);
6223 format %{ "MOV $dst,$mem" %}
6224 opcode(0x8B);
6225 ins_encode( OpcP, RegMem(dst,mem));
6226 ins_pipe( ialu_reg_mem );
6227 %}
6229 // Load Double
6230 instruct loadDPR(regDPR dst, memory mem) %{
6231 predicate(UseSSE<=1);
6232 match(Set dst (LoadD mem));
6234 ins_cost(150);
6235 format %{ "FLD_D ST,$mem\n\t"
6236 "FSTP $dst" %}
6237 opcode(0xDD); /* DD /0 */
6238 ins_encode( OpcP, RMopc_Mem(0x00,mem),
6239 Pop_Reg_DPR(dst) );
6240 ins_pipe( fpu_reg_mem );
6241 %}
6243 // Load Double to XMM
6244 instruct loadD(regD dst, memory mem) %{
6245 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
6246 match(Set dst (LoadD mem));
6247 ins_cost(145);
6248 format %{ "MOVSD $dst,$mem" %}
6249 ins_encode %{
6250 __ movdbl ($dst$$XMMRegister, $mem$$Address);
6251 %}
6252 ins_pipe( pipe_slow );
6253 %}
6255 instruct loadD_partial(regD dst, memory mem) %{
6256 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
6257 match(Set dst (LoadD mem));
6258 ins_cost(145);
6259 format %{ "MOVLPD $dst,$mem" %}
6260 ins_encode %{
6261 __ movdbl ($dst$$XMMRegister, $mem$$Address);
6262 %}
6263 ins_pipe( pipe_slow );
6264 %}
6266 // Load to XMM register (single-precision floating point)
6267 // MOVSS instruction
6268 instruct loadF(regF dst, memory mem) %{
6269 predicate(UseSSE>=1);
6270 match(Set dst (LoadF mem));
6271 ins_cost(145);
6272 format %{ "MOVSS $dst,$mem" %}
6273 ins_encode %{
6274 __ movflt ($dst$$XMMRegister, $mem$$Address);
6275 %}
6276 ins_pipe( pipe_slow );
6277 %}
6279 // Load Float
6280 instruct loadFPR(regFPR dst, memory mem) %{
6281 predicate(UseSSE==0);
6282 match(Set dst (LoadF mem));
6284 ins_cost(150);
6285 format %{ "FLD_S ST,$mem\n\t"
6286 "FSTP $dst" %}
6287 opcode(0xD9); /* D9 /0 */
6288 ins_encode( OpcP, RMopc_Mem(0x00,mem),
6289 Pop_Reg_FPR(dst) );
6290 ins_pipe( fpu_reg_mem );
6291 %}
6293 // Load Effective Address
6294 instruct leaP8(eRegP dst, indOffset8 mem) %{
6295 match(Set dst mem);
6297 ins_cost(110);
6298 format %{ "LEA $dst,$mem" %}
6299 opcode(0x8D);
6300 ins_encode( OpcP, RegMem(dst,mem));
6301 ins_pipe( ialu_reg_reg_fat );
6302 %}
6304 instruct leaP32(eRegP dst, indOffset32 mem) %{
6305 match(Set dst mem);
6307 ins_cost(110);
6308 format %{ "LEA $dst,$mem" %}
6309 opcode(0x8D);
6310 ins_encode( OpcP, RegMem(dst,mem));
6311 ins_pipe( ialu_reg_reg_fat );
6312 %}
6314 instruct leaPIdxOff(eRegP dst, indIndexOffset mem) %{
6315 match(Set dst mem);
6317 ins_cost(110);
6318 format %{ "LEA $dst,$mem" %}
6319 opcode(0x8D);
6320 ins_encode( OpcP, RegMem(dst,mem));
6321 ins_pipe( ialu_reg_reg_fat );
6322 %}
6324 instruct leaPIdxScale(eRegP dst, indIndexScale mem) %{
6325 match(Set dst mem);
6327 ins_cost(110);
6328 format %{ "LEA $dst,$mem" %}
6329 opcode(0x8D);
6330 ins_encode( OpcP, RegMem(dst,mem));
6331 ins_pipe( ialu_reg_reg_fat );
6332 %}
6334 instruct leaPIdxScaleOff(eRegP dst, indIndexScaleOffset mem) %{
6335 match(Set dst mem);
6337 ins_cost(110);
6338 format %{ "LEA $dst,$mem" %}
6339 opcode(0x8D);
6340 ins_encode( OpcP, RegMem(dst,mem));
6341 ins_pipe( ialu_reg_reg_fat );
6342 %}
6344 // Load Constant
6345 instruct loadConI(rRegI dst, immI src) %{
6346 match(Set dst src);
6348 format %{ "MOV $dst,$src" %}
6349 ins_encode( LdImmI(dst, src) );
6350 ins_pipe( ialu_reg_fat );
6351 %}
6353 // Load Constant zero
6354 instruct loadConI0(rRegI dst, immI0 src, eFlagsReg cr) %{
6355 match(Set dst src);
6356 effect(KILL cr);
6358 ins_cost(50);
6359 format %{ "XOR $dst,$dst" %}
6360 opcode(0x33); /* + rd */
6361 ins_encode( OpcP, RegReg( dst, dst ) );
6362 ins_pipe( ialu_reg );
6363 %}
6365 instruct loadConP(eRegP dst, immP src) %{
6366 match(Set dst src);
6368 format %{ "MOV $dst,$src" %}
6369 opcode(0xB8); /* + rd */
6370 ins_encode( LdImmP(dst, src) );
6371 ins_pipe( ialu_reg_fat );
6372 %}
6374 instruct loadConL(eRegL dst, immL src, eFlagsReg cr) %{
6375 match(Set dst src);
6376 effect(KILL cr);
6377 ins_cost(200);
6378 format %{ "MOV $dst.lo,$src.lo\n\t"
6379 "MOV $dst.hi,$src.hi" %}
6380 opcode(0xB8);
6381 ins_encode( LdImmL_Lo(dst, src), LdImmL_Hi(dst, src) );
6382 ins_pipe( ialu_reg_long_fat );
6383 %}
6385 instruct loadConL0(eRegL dst, immL0 src, eFlagsReg cr) %{
6386 match(Set dst src);
6387 effect(KILL cr);
6388 ins_cost(150);
6389 format %{ "XOR $dst.lo,$dst.lo\n\t"
6390 "XOR $dst.hi,$dst.hi" %}
6391 opcode(0x33,0x33);
6392 ins_encode( RegReg_Lo(dst,dst), RegReg_Hi(dst, dst) );
6393 ins_pipe( ialu_reg_long );
6394 %}
6396 // The instruction usage is guarded by predicate in operand immFPR().
6397 instruct loadConFPR(regFPR dst, immFPR con) %{
6398 match(Set dst con);
6399 ins_cost(125);
6400 format %{ "FLD_S ST,[$constantaddress]\t# load from constant table: float=$con\n\t"
6401 "FSTP $dst" %}
6402 ins_encode %{
6403 __ fld_s($constantaddress($con));
6404 __ fstp_d($dst$$reg);
6405 %}
6406 ins_pipe(fpu_reg_con);
6407 %}
6409 // The instruction usage is guarded by predicate in operand immFPR0().
6410 instruct loadConFPR0(regFPR dst, immFPR0 con) %{
6411 match(Set dst con);
6412 ins_cost(125);
6413 format %{ "FLDZ ST\n\t"
6414 "FSTP $dst" %}
6415 ins_encode %{
6416 __ fldz();
6417 __ fstp_d($dst$$reg);
6418 %}
6419 ins_pipe(fpu_reg_con);
6420 %}
6422 // The instruction usage is guarded by predicate in operand immFPR1().
6423 instruct loadConFPR1(regFPR dst, immFPR1 con) %{
6424 match(Set dst con);
6425 ins_cost(125);
6426 format %{ "FLD1 ST\n\t"
6427 "FSTP $dst" %}
6428 ins_encode %{
6429 __ fld1();
6430 __ fstp_d($dst$$reg);
6431 %}
6432 ins_pipe(fpu_reg_con);
6433 %}
6435 // The instruction usage is guarded by predicate in operand immF().
6436 instruct loadConF(regF dst, immF con) %{
6437 match(Set dst con);
6438 ins_cost(125);
6439 format %{ "MOVSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
6440 ins_encode %{
6441 __ movflt($dst$$XMMRegister, $constantaddress($con));
6442 %}
6443 ins_pipe(pipe_slow);
6444 %}
6446 // The instruction usage is guarded by predicate in operand immF0().
6447 instruct loadConF0(regF dst, immF0 src) %{
6448 match(Set dst src);
6449 ins_cost(100);
6450 format %{ "XORPS $dst,$dst\t# float 0.0" %}
6451 ins_encode %{
6452 __ xorps($dst$$XMMRegister, $dst$$XMMRegister);
6453 %}
6454 ins_pipe(pipe_slow);
6455 %}
6457 // The instruction usage is guarded by predicate in operand immDPR().
6458 instruct loadConDPR(regDPR dst, immDPR con) %{
6459 match(Set dst con);
6460 ins_cost(125);
6462 format %{ "FLD_D ST,[$constantaddress]\t# load from constant table: double=$con\n\t"
6463 "FSTP $dst" %}
6464 ins_encode %{
6465 __ fld_d($constantaddress($con));
6466 __ fstp_d($dst$$reg);
6467 %}
6468 ins_pipe(fpu_reg_con);
6469 %}
6471 // The instruction usage is guarded by predicate in operand immDPR0().
6472 instruct loadConDPR0(regDPR dst, immDPR0 con) %{
6473 match(Set dst con);
6474 ins_cost(125);
6476 format %{ "FLDZ ST\n\t"
6477 "FSTP $dst" %}
6478 ins_encode %{
6479 __ fldz();
6480 __ fstp_d($dst$$reg);
6481 %}
6482 ins_pipe(fpu_reg_con);
6483 %}
6485 // The instruction usage is guarded by predicate in operand immDPR1().
6486 instruct loadConDPR1(regDPR dst, immDPR1 con) %{
6487 match(Set dst con);
6488 ins_cost(125);
6490 format %{ "FLD1 ST\n\t"
6491 "FSTP $dst" %}
6492 ins_encode %{
6493 __ fld1();
6494 __ fstp_d($dst$$reg);
6495 %}
6496 ins_pipe(fpu_reg_con);
6497 %}
6499 // The instruction usage is guarded by predicate in operand immD().
6500 instruct loadConD(regD dst, immD con) %{
6501 match(Set dst con);
6502 ins_cost(125);
6503 format %{ "MOVSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
6504 ins_encode %{
6505 __ movdbl($dst$$XMMRegister, $constantaddress($con));
6506 %}
6507 ins_pipe(pipe_slow);
6508 %}
6510 // The instruction usage is guarded by predicate in operand immD0().
6511 instruct loadConD0(regD dst, immD0 src) %{
6512 match(Set dst src);
6513 ins_cost(100);
6514 format %{ "XORPD $dst,$dst\t# double 0.0" %}
6515 ins_encode %{
6516 __ xorpd ($dst$$XMMRegister, $dst$$XMMRegister);
6517 %}
6518 ins_pipe( pipe_slow );
6519 %}
6521 // Load Stack Slot
6522 instruct loadSSI(rRegI dst, stackSlotI src) %{
6523 match(Set dst src);
6524 ins_cost(125);
6526 format %{ "MOV $dst,$src" %}
6527 opcode(0x8B);
6528 ins_encode( OpcP, RegMem(dst,src));
6529 ins_pipe( ialu_reg_mem );
6530 %}
6532 instruct loadSSL(eRegL dst, stackSlotL src) %{
6533 match(Set dst src);
6535 ins_cost(200);
6536 format %{ "MOV $dst,$src.lo\n\t"
6537 "MOV $dst+4,$src.hi" %}
6538 opcode(0x8B, 0x8B);
6539 ins_encode( OpcP, RegMem( dst, src ), OpcS, RegMem_Hi( dst, src ) );
6540 ins_pipe( ialu_mem_long_reg );
6541 %}
6543 // Load Stack Slot
6544 instruct loadSSP(eRegP dst, stackSlotP src) %{
6545 match(Set dst src);
6546 ins_cost(125);
6548 format %{ "MOV $dst,$src" %}
6549 opcode(0x8B);
6550 ins_encode( OpcP, RegMem(dst,src));
6551 ins_pipe( ialu_reg_mem );
6552 %}
6554 // Load Stack Slot
6555 instruct loadSSF(regFPR dst, stackSlotF src) %{
6556 match(Set dst src);
6557 ins_cost(125);
6559 format %{ "FLD_S $src\n\t"
6560 "FSTP $dst" %}
6561 opcode(0xD9); /* D9 /0, FLD m32real */
6562 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
6563 Pop_Reg_FPR(dst) );
6564 ins_pipe( fpu_reg_mem );
6565 %}
6567 // Load Stack Slot
6568 instruct loadSSD(regDPR dst, stackSlotD src) %{
6569 match(Set dst src);
6570 ins_cost(125);
6572 format %{ "FLD_D $src\n\t"
6573 "FSTP $dst" %}
6574 opcode(0xDD); /* DD /0, FLD m64real */
6575 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
6576 Pop_Reg_DPR(dst) );
6577 ins_pipe( fpu_reg_mem );
6578 %}
6580 // Prefetch instructions.
6581 // Must be safe to execute with invalid address (cannot fault).
6583 instruct prefetchr0( memory mem ) %{
6584 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
6585 match(PrefetchRead mem);
6586 ins_cost(0);
6587 size(0);
6588 format %{ "PREFETCHR (non-SSE is empty encoding)" %}
6589 ins_encode();
6590 ins_pipe(empty);
6591 %}
6593 instruct prefetchr( memory mem ) %{
6594 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch() || ReadPrefetchInstr==3);
6595 match(PrefetchRead mem);
6596 ins_cost(100);
6598 format %{ "PREFETCHR $mem\t! Prefetch into level 1 cache for read" %}
6599 ins_encode %{
6600 __ prefetchr($mem$$Address);
6601 %}
6602 ins_pipe(ialu_mem);
6603 %}
6605 instruct prefetchrNTA( memory mem ) %{
6606 predicate(UseSSE>=1 && ReadPrefetchInstr==0);
6607 match(PrefetchRead mem);
6608 ins_cost(100);
6610 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for read" %}
6611 ins_encode %{
6612 __ prefetchnta($mem$$Address);
6613 %}
6614 ins_pipe(ialu_mem);
6615 %}
6617 instruct prefetchrT0( memory mem ) %{
6618 predicate(UseSSE>=1 && ReadPrefetchInstr==1);
6619 match(PrefetchRead mem);
6620 ins_cost(100);
6622 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for read" %}
6623 ins_encode %{
6624 __ prefetcht0($mem$$Address);
6625 %}
6626 ins_pipe(ialu_mem);
6627 %}
6629 instruct prefetchrT2( memory mem ) %{
6630 predicate(UseSSE>=1 && ReadPrefetchInstr==2);
6631 match(PrefetchRead mem);
6632 ins_cost(100);
6634 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for read" %}
6635 ins_encode %{
6636 __ prefetcht2($mem$$Address);
6637 %}
6638 ins_pipe(ialu_mem);
6639 %}
6641 instruct prefetchw0( memory mem ) %{
6642 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
6643 match(PrefetchWrite mem);
6644 ins_cost(0);
6645 size(0);
6646 format %{ "Prefetch (non-SSE is empty encoding)" %}
6647 ins_encode();
6648 ins_pipe(empty);
6649 %}
6651 instruct prefetchw( memory mem ) %{
6652 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch());
6653 match( PrefetchWrite mem );
6654 ins_cost(100);
6656 format %{ "PREFETCHW $mem\t! Prefetch into L1 cache and mark modified" %}
6657 ins_encode %{
6658 __ prefetchw($mem$$Address);
6659 %}
6660 ins_pipe(ialu_mem);
6661 %}
6663 instruct prefetchwNTA( memory mem ) %{
6664 predicate(UseSSE>=1);
6665 match(PrefetchWrite mem);
6666 ins_cost(100);
6668 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for write" %}
6669 ins_encode %{
6670 __ prefetchnta($mem$$Address);
6671 %}
6672 ins_pipe(ialu_mem);
6673 %}
6675 // Prefetch instructions for allocation.
6677 instruct prefetchAlloc0( memory mem ) %{
6678 predicate(UseSSE==0 && AllocatePrefetchInstr!=3);
6679 match(PrefetchAllocation mem);
6680 ins_cost(0);
6681 size(0);
6682 format %{ "Prefetch allocation (non-SSE is empty encoding)" %}
6683 ins_encode();
6684 ins_pipe(empty);
6685 %}
6687 instruct prefetchAlloc( memory mem ) %{
6688 predicate(AllocatePrefetchInstr==3);
6689 match( PrefetchAllocation mem );
6690 ins_cost(100);
6692 format %{ "PREFETCHW $mem\t! Prefetch allocation into L1 cache and mark modified" %}
6693 ins_encode %{
6694 __ prefetchw($mem$$Address);
6695 %}
6696 ins_pipe(ialu_mem);
6697 %}
6699 instruct prefetchAllocNTA( memory mem ) %{
6700 predicate(UseSSE>=1 && AllocatePrefetchInstr==0);
6701 match(PrefetchAllocation mem);
6702 ins_cost(100);
6704 format %{ "PREFETCHNTA $mem\t! Prefetch allocation into non-temporal cache for write" %}
6705 ins_encode %{
6706 __ prefetchnta($mem$$Address);
6707 %}
6708 ins_pipe(ialu_mem);
6709 %}
6711 instruct prefetchAllocT0( memory mem ) %{
6712 predicate(UseSSE>=1 && AllocatePrefetchInstr==1);
6713 match(PrefetchAllocation mem);
6714 ins_cost(100);
6716 format %{ "PREFETCHT0 $mem\t! Prefetch allocation into L1 and L2 caches for write" %}
6717 ins_encode %{
6718 __ prefetcht0($mem$$Address);
6719 %}
6720 ins_pipe(ialu_mem);
6721 %}
6723 instruct prefetchAllocT2( memory mem ) %{
6724 predicate(UseSSE>=1 && AllocatePrefetchInstr==2);
6725 match(PrefetchAllocation mem);
6726 ins_cost(100);
6728 format %{ "PREFETCHT2 $mem\t! Prefetch allocation into L2 cache for write" %}
6729 ins_encode %{
6730 __ prefetcht2($mem$$Address);
6731 %}
6732 ins_pipe(ialu_mem);
6733 %}
6735 //----------Store Instructions-------------------------------------------------
6737 // Store Byte
6738 instruct storeB(memory mem, xRegI src) %{
6739 match(Set mem (StoreB mem src));
6741 ins_cost(125);
6742 format %{ "MOV8 $mem,$src" %}
6743 opcode(0x88);
6744 ins_encode( OpcP, RegMem( src, mem ) );
6745 ins_pipe( ialu_mem_reg );
6746 %}
6748 // Store Char/Short
6749 instruct storeC(memory mem, rRegI src) %{
6750 match(Set mem (StoreC mem src));
6752 ins_cost(125);
6753 format %{ "MOV16 $mem,$src" %}
6754 opcode(0x89, 0x66);
6755 ins_encode( OpcS, OpcP, RegMem( src, mem ) );
6756 ins_pipe( ialu_mem_reg );
6757 %}
6759 // Store Integer
6760 instruct storeI(memory mem, rRegI src) %{
6761 match(Set mem (StoreI mem src));
6763 ins_cost(125);
6764 format %{ "MOV $mem,$src" %}
6765 opcode(0x89);
6766 ins_encode( OpcP, RegMem( src, mem ) );
6767 ins_pipe( ialu_mem_reg );
6768 %}
6770 // Store Long
6771 instruct storeL(long_memory mem, eRegL src) %{
6772 predicate(!((StoreLNode*)n)->require_atomic_access());
6773 match(Set mem (StoreL mem src));
6775 ins_cost(200);
6776 format %{ "MOV $mem,$src.lo\n\t"
6777 "MOV $mem+4,$src.hi" %}
6778 opcode(0x89, 0x89);
6779 ins_encode( OpcP, RegMem( src, mem ), OpcS, RegMem_Hi( src, mem ) );
6780 ins_pipe( ialu_mem_long_reg );
6781 %}
6783 // Store Long to Integer
6784 instruct storeL2I(memory mem, eRegL src) %{
6785 match(Set mem (StoreI mem (ConvL2I src)));
6787 format %{ "MOV $mem,$src.lo\t# long -> int" %}
6788 ins_encode %{
6789 __ movl($mem$$Address, $src$$Register);
6790 %}
6791 ins_pipe(ialu_mem_reg);
6792 %}
6794 // Volatile Store Long. Must be atomic, so move it into
6795 // the FP TOS and then do a 64-bit FIST. Has to probe the
6796 // target address before the store (for null-ptr checks)
6797 // so the memory operand is used twice in the encoding.
6798 instruct storeL_volatile(memory mem, stackSlotL src, eFlagsReg cr ) %{
6799 predicate(UseSSE<=1 && ((StoreLNode*)n)->require_atomic_access());
6800 match(Set mem (StoreL mem src));
6801 effect( KILL cr );
6802 ins_cost(400);
6803 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6804 "FILD $src\n\t"
6805 "FISTp $mem\t # 64-bit atomic volatile long store" %}
6806 opcode(0x3B);
6807 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeL_volatile(mem,src));
6808 ins_pipe( fpu_reg_mem );
6809 %}
6811 instruct storeLX_volatile(memory mem, stackSlotL src, regD tmp, eFlagsReg cr) %{
6812 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
6813 match(Set mem (StoreL mem src));
6814 effect( TEMP tmp, KILL cr );
6815 ins_cost(380);
6816 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6817 "MOVSD $tmp,$src\n\t"
6818 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
6819 ins_encode %{
6820 __ cmpl(rax, $mem$$Address);
6821 __ movdbl($tmp$$XMMRegister, Address(rsp, $src$$disp));
6822 __ movdbl($mem$$Address, $tmp$$XMMRegister);
6823 %}
6824 ins_pipe( pipe_slow );
6825 %}
6827 instruct storeLX_reg_volatile(memory mem, eRegL src, regD tmp2, regD tmp, eFlagsReg cr) %{
6828 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
6829 match(Set mem (StoreL mem src));
6830 effect( TEMP tmp2 , TEMP tmp, KILL cr );
6831 ins_cost(360);
6832 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6833 "MOVD $tmp,$src.lo\n\t"
6834 "MOVD $tmp2,$src.hi\n\t"
6835 "PUNPCKLDQ $tmp,$tmp2\n\t"
6836 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
6837 ins_encode %{
6838 __ cmpl(rax, $mem$$Address);
6839 __ movdl($tmp$$XMMRegister, $src$$Register);
6840 __ movdl($tmp2$$XMMRegister, HIGH_FROM_LOW($src$$Register));
6841 __ punpckldq($tmp$$XMMRegister, $tmp2$$XMMRegister);
6842 __ movdbl($mem$$Address, $tmp$$XMMRegister);
6843 %}
6844 ins_pipe( pipe_slow );
6845 %}
6847 // Store Pointer; for storing unknown oops and raw pointers
6848 instruct storeP(memory mem, anyRegP src) %{
6849 match(Set mem (StoreP mem src));
6851 ins_cost(125);
6852 format %{ "MOV $mem,$src" %}
6853 opcode(0x89);
6854 ins_encode( OpcP, RegMem( src, mem ) );
6855 ins_pipe( ialu_mem_reg );
6856 %}
6858 // Store Integer Immediate
6859 instruct storeImmI(memory mem, immI src) %{
6860 match(Set mem (StoreI mem src));
6862 ins_cost(150);
6863 format %{ "MOV $mem,$src" %}
6864 opcode(0xC7); /* C7 /0 */
6865 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
6866 ins_pipe( ialu_mem_imm );
6867 %}
6869 // Store Short/Char Immediate
6870 instruct storeImmI16(memory mem, immI16 src) %{
6871 predicate(UseStoreImmI16);
6872 match(Set mem (StoreC mem src));
6874 ins_cost(150);
6875 format %{ "MOV16 $mem,$src" %}
6876 opcode(0xC7); /* C7 /0 Same as 32 store immediate with prefix */
6877 ins_encode( SizePrefix, OpcP, RMopc_Mem(0x00,mem), Con16( src ));
6878 ins_pipe( ialu_mem_imm );
6879 %}
6881 // Store Pointer Immediate; null pointers or constant oops that do not
6882 // need card-mark barriers.
6883 instruct storeImmP(memory mem, immP src) %{
6884 match(Set mem (StoreP mem src));
6886 ins_cost(150);
6887 format %{ "MOV $mem,$src" %}
6888 opcode(0xC7); /* C7 /0 */
6889 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
6890 ins_pipe( ialu_mem_imm );
6891 %}
6893 // Store Byte Immediate
6894 instruct storeImmB(memory mem, immI8 src) %{
6895 match(Set mem (StoreB mem src));
6897 ins_cost(150);
6898 format %{ "MOV8 $mem,$src" %}
6899 opcode(0xC6); /* C6 /0 */
6900 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
6901 ins_pipe( ialu_mem_imm );
6902 %}
6904 // Store CMS card-mark Immediate
6905 instruct storeImmCM(memory mem, immI8 src) %{
6906 match(Set mem (StoreCM mem src));
6908 ins_cost(150);
6909 format %{ "MOV8 $mem,$src\t! CMS card-mark imm0" %}
6910 opcode(0xC6); /* C6 /0 */
6911 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
6912 ins_pipe( ialu_mem_imm );
6913 %}
6915 // Store Double
6916 instruct storeDPR( memory mem, regDPR1 src) %{
6917 predicate(UseSSE<=1);
6918 match(Set mem (StoreD mem src));
6920 ins_cost(100);
6921 format %{ "FST_D $mem,$src" %}
6922 opcode(0xDD); /* DD /2 */
6923 ins_encode( enc_FPR_store(mem,src) );
6924 ins_pipe( fpu_mem_reg );
6925 %}
6927 // Store double does rounding on x86
6928 instruct storeDPR_rounded( memory mem, regDPR1 src) %{
6929 predicate(UseSSE<=1);
6930 match(Set mem (StoreD mem (RoundDouble src)));
6932 ins_cost(100);
6933 format %{ "FST_D $mem,$src\t# round" %}
6934 opcode(0xDD); /* DD /2 */
6935 ins_encode( enc_FPR_store(mem,src) );
6936 ins_pipe( fpu_mem_reg );
6937 %}
6939 // Store XMM register to memory (double-precision floating points)
6940 // MOVSD instruction
6941 instruct storeD(memory mem, regD src) %{
6942 predicate(UseSSE>=2);
6943 match(Set mem (StoreD mem src));
6944 ins_cost(95);
6945 format %{ "MOVSD $mem,$src" %}
6946 ins_encode %{
6947 __ movdbl($mem$$Address, $src$$XMMRegister);
6948 %}
6949 ins_pipe( pipe_slow );
6950 %}
6952 // Store XMM register to memory (single-precision floating point)
6953 // MOVSS instruction
6954 instruct storeF(memory mem, regF src) %{
6955 predicate(UseSSE>=1);
6956 match(Set mem (StoreF mem src));
6957 ins_cost(95);
6958 format %{ "MOVSS $mem,$src" %}
6959 ins_encode %{
6960 __ movflt($mem$$Address, $src$$XMMRegister);
6961 %}
6962 ins_pipe( pipe_slow );
6963 %}
6965 // Store Float
6966 instruct storeFPR( memory mem, regFPR1 src) %{
6967 predicate(UseSSE==0);
6968 match(Set mem (StoreF mem src));
6970 ins_cost(100);
6971 format %{ "FST_S $mem,$src" %}
6972 opcode(0xD9); /* D9 /2 */
6973 ins_encode( enc_FPR_store(mem,src) );
6974 ins_pipe( fpu_mem_reg );
6975 %}
6977 // Store Float does rounding on x86
6978 instruct storeFPR_rounded( memory mem, regFPR1 src) %{
6979 predicate(UseSSE==0);
6980 match(Set mem (StoreF mem (RoundFloat src)));
6982 ins_cost(100);
6983 format %{ "FST_S $mem,$src\t# round" %}
6984 opcode(0xD9); /* D9 /2 */
6985 ins_encode( enc_FPR_store(mem,src) );
6986 ins_pipe( fpu_mem_reg );
6987 %}
6989 // Store Float does rounding on x86
6990 instruct storeFPR_Drounded( memory mem, regDPR1 src) %{
6991 predicate(UseSSE<=1);
6992 match(Set mem (StoreF mem (ConvD2F src)));
6994 ins_cost(100);
6995 format %{ "FST_S $mem,$src\t# D-round" %}
6996 opcode(0xD9); /* D9 /2 */
6997 ins_encode( enc_FPR_store(mem,src) );
6998 ins_pipe( fpu_mem_reg );
6999 %}
7001 // Store immediate Float value (it is faster than store from FPU register)
7002 // The instruction usage is guarded by predicate in operand immFPR().
7003 instruct storeFPR_imm( memory mem, immFPR src) %{
7004 match(Set mem (StoreF mem src));
7006 ins_cost(50);
7007 format %{ "MOV $mem,$src\t# store float" %}
7008 opcode(0xC7); /* C7 /0 */
7009 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32FPR_as_bits( src ));
7010 ins_pipe( ialu_mem_imm );
7011 %}
7013 // Store immediate Float value (it is faster than store from XMM register)
7014 // The instruction usage is guarded by predicate in operand immF().
7015 instruct storeF_imm( memory mem, immF src) %{
7016 match(Set mem (StoreF mem src));
7018 ins_cost(50);
7019 format %{ "MOV $mem,$src\t# store float" %}
7020 opcode(0xC7); /* C7 /0 */
7021 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32F_as_bits( src ));
7022 ins_pipe( ialu_mem_imm );
7023 %}
7025 // Store Integer to stack slot
7026 instruct storeSSI(stackSlotI dst, rRegI src) %{
7027 match(Set dst src);
7029 ins_cost(100);
7030 format %{ "MOV $dst,$src" %}
7031 opcode(0x89);
7032 ins_encode( OpcPRegSS( dst, src ) );
7033 ins_pipe( ialu_mem_reg );
7034 %}
7036 // Store Integer to stack slot
7037 instruct storeSSP(stackSlotP dst, eRegP src) %{
7038 match(Set dst src);
7040 ins_cost(100);
7041 format %{ "MOV $dst,$src" %}
7042 opcode(0x89);
7043 ins_encode( OpcPRegSS( dst, src ) );
7044 ins_pipe( ialu_mem_reg );
7045 %}
7047 // Store Long to stack slot
7048 instruct storeSSL(stackSlotL dst, eRegL src) %{
7049 match(Set dst src);
7051 ins_cost(200);
7052 format %{ "MOV $dst,$src.lo\n\t"
7053 "MOV $dst+4,$src.hi" %}
7054 opcode(0x89, 0x89);
7055 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
7056 ins_pipe( ialu_mem_long_reg );
7057 %}
7059 //----------MemBar Instructions-----------------------------------------------
7060 // Memory barrier flavors
7062 instruct membar_acquire() %{
7063 match(MemBarAcquire);
7064 ins_cost(400);
7066 size(0);
7067 format %{ "MEMBAR-acquire ! (empty encoding)" %}
7068 ins_encode();
7069 ins_pipe(empty);
7070 %}
7072 instruct membar_acquire_lock() %{
7073 match(MemBarAcquireLock);
7074 ins_cost(0);
7076 size(0);
7077 format %{ "MEMBAR-acquire (prior CMPXCHG in FastLock so empty encoding)" %}
7078 ins_encode( );
7079 ins_pipe(empty);
7080 %}
7082 instruct membar_release() %{
7083 match(MemBarRelease);
7084 ins_cost(400);
7086 size(0);
7087 format %{ "MEMBAR-release ! (empty encoding)" %}
7088 ins_encode( );
7089 ins_pipe(empty);
7090 %}
7092 instruct membar_release_lock() %{
7093 match(MemBarReleaseLock);
7094 ins_cost(0);
7096 size(0);
7097 format %{ "MEMBAR-release (a FastUnlock follows so empty encoding)" %}
7098 ins_encode( );
7099 ins_pipe(empty);
7100 %}
7102 instruct membar_volatile(eFlagsReg cr) %{
7103 match(MemBarVolatile);
7104 effect(KILL cr);
7105 ins_cost(400);
7107 format %{
7108 $$template
7109 if (os::is_MP()) {
7110 $$emit$$"LOCK ADDL [ESP + #0], 0\t! membar_volatile"
7111 } else {
7112 $$emit$$"MEMBAR-volatile ! (empty encoding)"
7113 }
7114 %}
7115 ins_encode %{
7116 __ membar(Assembler::StoreLoad);
7117 %}
7118 ins_pipe(pipe_slow);
7119 %}
7121 instruct unnecessary_membar_volatile() %{
7122 match(MemBarVolatile);
7123 predicate(Matcher::post_store_load_barrier(n));
7124 ins_cost(0);
7126 size(0);
7127 format %{ "MEMBAR-volatile (unnecessary so empty encoding)" %}
7128 ins_encode( );
7129 ins_pipe(empty);
7130 %}
7132 instruct membar_storestore() %{
7133 match(MemBarStoreStore);
7134 ins_cost(0);
7136 size(0);
7137 format %{ "MEMBAR-storestore (empty encoding)" %}
7138 ins_encode( );
7139 ins_pipe(empty);
7140 %}
7142 //----------Move Instructions--------------------------------------------------
7143 instruct castX2P(eAXRegP dst, eAXRegI src) %{
7144 match(Set dst (CastX2P src));
7145 format %{ "# X2P $dst, $src" %}
7146 ins_encode( /*empty encoding*/ );
7147 ins_cost(0);
7148 ins_pipe(empty);
7149 %}
7151 instruct castP2X(rRegI dst, eRegP src ) %{
7152 match(Set dst (CastP2X src));
7153 ins_cost(50);
7154 format %{ "MOV $dst, $src\t# CastP2X" %}
7155 ins_encode( enc_Copy( dst, src) );
7156 ins_pipe( ialu_reg_reg );
7157 %}
7159 //----------Conditional Move---------------------------------------------------
7160 // Conditional move
7161 instruct jmovI_reg(cmpOp cop, eFlagsReg cr, rRegI dst, rRegI src) %{
7162 predicate(!VM_Version::supports_cmov() );
7163 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7164 ins_cost(200);
7165 format %{ "J$cop,us skip\t# signed cmove\n\t"
7166 "MOV $dst,$src\n"
7167 "skip:" %}
7168 ins_encode %{
7169 Label Lskip;
7170 // Invert sense of branch from sense of CMOV
7171 __ jccb((Assembler::Condition)($cop$$cmpcode^1), Lskip);
7172 __ movl($dst$$Register, $src$$Register);
7173 __ bind(Lskip);
7174 %}
7175 ins_pipe( pipe_cmov_reg );
7176 %}
7178 instruct jmovI_regU(cmpOpU cop, eFlagsRegU cr, rRegI dst, rRegI src) %{
7179 predicate(!VM_Version::supports_cmov() );
7180 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7181 ins_cost(200);
7182 format %{ "J$cop,us skip\t# unsigned cmove\n\t"
7183 "MOV $dst,$src\n"
7184 "skip:" %}
7185 ins_encode %{
7186 Label Lskip;
7187 // Invert sense of branch from sense of CMOV
7188 __ jccb((Assembler::Condition)($cop$$cmpcode^1), Lskip);
7189 __ movl($dst$$Register, $src$$Register);
7190 __ bind(Lskip);
7191 %}
7192 ins_pipe( pipe_cmov_reg );
7193 %}
7195 instruct cmovI_reg(rRegI dst, rRegI src, eFlagsReg cr, cmpOp cop ) %{
7196 predicate(VM_Version::supports_cmov() );
7197 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7198 ins_cost(200);
7199 format %{ "CMOV$cop $dst,$src" %}
7200 opcode(0x0F,0x40);
7201 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7202 ins_pipe( pipe_cmov_reg );
7203 %}
7205 instruct cmovI_regU( cmpOpU cop, eFlagsRegU cr, rRegI dst, rRegI src ) %{
7206 predicate(VM_Version::supports_cmov() );
7207 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7208 ins_cost(200);
7209 format %{ "CMOV$cop $dst,$src" %}
7210 opcode(0x0F,0x40);
7211 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7212 ins_pipe( pipe_cmov_reg );
7213 %}
7215 instruct cmovI_regUCF( cmpOpUCF cop, eFlagsRegUCF cr, rRegI dst, rRegI src ) %{
7216 predicate(VM_Version::supports_cmov() );
7217 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7218 ins_cost(200);
7219 expand %{
7220 cmovI_regU(cop, cr, dst, src);
7221 %}
7222 %}
7224 // Conditional move
7225 instruct cmovI_mem(cmpOp cop, eFlagsReg cr, rRegI dst, memory src) %{
7226 predicate(VM_Version::supports_cmov() );
7227 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7228 ins_cost(250);
7229 format %{ "CMOV$cop $dst,$src" %}
7230 opcode(0x0F,0x40);
7231 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7232 ins_pipe( pipe_cmov_mem );
7233 %}
7235 // Conditional move
7236 instruct cmovI_memU(cmpOpU cop, eFlagsRegU cr, rRegI dst, memory src) %{
7237 predicate(VM_Version::supports_cmov() );
7238 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7239 ins_cost(250);
7240 format %{ "CMOV$cop $dst,$src" %}
7241 opcode(0x0F,0x40);
7242 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7243 ins_pipe( pipe_cmov_mem );
7244 %}
7246 instruct cmovI_memUCF(cmpOpUCF cop, eFlagsRegUCF cr, rRegI dst, memory src) %{
7247 predicate(VM_Version::supports_cmov() );
7248 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7249 ins_cost(250);
7250 expand %{
7251 cmovI_memU(cop, cr, dst, src);
7252 %}
7253 %}
7255 // Conditional move
7256 instruct cmovP_reg(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7257 predicate(VM_Version::supports_cmov() );
7258 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7259 ins_cost(200);
7260 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7261 opcode(0x0F,0x40);
7262 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7263 ins_pipe( pipe_cmov_reg );
7264 %}
7266 // Conditional move (non-P6 version)
7267 // Note: a CMoveP is generated for stubs and native wrappers
7268 // regardless of whether we are on a P6, so we
7269 // emulate a cmov here
7270 instruct cmovP_reg_nonP6(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7271 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7272 ins_cost(300);
7273 format %{ "Jn$cop skip\n\t"
7274 "MOV $dst,$src\t# pointer\n"
7275 "skip:" %}
7276 opcode(0x8b);
7277 ins_encode( enc_cmov_branch(cop, 0x2), OpcP, RegReg(dst, src));
7278 ins_pipe( pipe_cmov_reg );
7279 %}
7281 // Conditional move
7282 instruct cmovP_regU(cmpOpU cop, eFlagsRegU cr, eRegP dst, eRegP src ) %{
7283 predicate(VM_Version::supports_cmov() );
7284 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7285 ins_cost(200);
7286 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7287 opcode(0x0F,0x40);
7288 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7289 ins_pipe( pipe_cmov_reg );
7290 %}
7292 instruct cmovP_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegP dst, eRegP src ) %{
7293 predicate(VM_Version::supports_cmov() );
7294 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7295 ins_cost(200);
7296 expand %{
7297 cmovP_regU(cop, cr, dst, src);
7298 %}
7299 %}
7301 // DISABLED: Requires the ADLC to emit a bottom_type call that
7302 // correctly meets the two pointer arguments; one is an incoming
7303 // register but the other is a memory operand. ALSO appears to
7304 // be buggy with implicit null checks.
7305 //
7306 //// Conditional move
7307 //instruct cmovP_mem(cmpOp cop, eFlagsReg cr, eRegP dst, memory src) %{
7308 // predicate(VM_Version::supports_cmov() );
7309 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
7310 // ins_cost(250);
7311 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
7312 // opcode(0x0F,0x40);
7313 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7314 // ins_pipe( pipe_cmov_mem );
7315 //%}
7316 //
7317 //// Conditional move
7318 //instruct cmovP_memU(cmpOpU cop, eFlagsRegU cr, eRegP dst, memory src) %{
7319 // predicate(VM_Version::supports_cmov() );
7320 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
7321 // ins_cost(250);
7322 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
7323 // opcode(0x0F,0x40);
7324 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7325 // ins_pipe( pipe_cmov_mem );
7326 //%}
7328 // Conditional move
7329 instruct fcmovDPR_regU(cmpOp_fcmov cop, eFlagsRegU cr, regDPR1 dst, regDPR src) %{
7330 predicate(UseSSE<=1);
7331 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7332 ins_cost(200);
7333 format %{ "FCMOV$cop $dst,$src\t# double" %}
7334 opcode(0xDA);
7335 ins_encode( enc_cmov_dpr(cop,src) );
7336 ins_pipe( pipe_cmovDPR_reg );
7337 %}
7339 // Conditional move
7340 instruct fcmovFPR_regU(cmpOp_fcmov cop, eFlagsRegU cr, regFPR1 dst, regFPR src) %{
7341 predicate(UseSSE==0);
7342 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7343 ins_cost(200);
7344 format %{ "FCMOV$cop $dst,$src\t# float" %}
7345 opcode(0xDA);
7346 ins_encode( enc_cmov_dpr(cop,src) );
7347 ins_pipe( pipe_cmovDPR_reg );
7348 %}
7350 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
7351 instruct fcmovDPR_regS(cmpOp cop, eFlagsReg cr, regDPR dst, regDPR src) %{
7352 predicate(UseSSE<=1);
7353 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7354 ins_cost(200);
7355 format %{ "Jn$cop skip\n\t"
7356 "MOV $dst,$src\t# double\n"
7357 "skip:" %}
7358 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
7359 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_DPR(src), OpcP, RegOpc(dst) );
7360 ins_pipe( pipe_cmovDPR_reg );
7361 %}
7363 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
7364 instruct fcmovFPR_regS(cmpOp cop, eFlagsReg cr, regFPR dst, regFPR src) %{
7365 predicate(UseSSE==0);
7366 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7367 ins_cost(200);
7368 format %{ "Jn$cop skip\n\t"
7369 "MOV $dst,$src\t# float\n"
7370 "skip:" %}
7371 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
7372 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_FPR(src), OpcP, RegOpc(dst) );
7373 ins_pipe( pipe_cmovDPR_reg );
7374 %}
7376 // No CMOVE with SSE/SSE2
7377 instruct fcmovF_regS(cmpOp cop, eFlagsReg cr, regF dst, regF src) %{
7378 predicate (UseSSE>=1);
7379 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7380 ins_cost(200);
7381 format %{ "Jn$cop skip\n\t"
7382 "MOVSS $dst,$src\t# float\n"
7383 "skip:" %}
7384 ins_encode %{
7385 Label skip;
7386 // Invert sense of branch from sense of CMOV
7387 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
7388 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
7389 __ bind(skip);
7390 %}
7391 ins_pipe( pipe_slow );
7392 %}
7394 // No CMOVE with SSE/SSE2
7395 instruct fcmovD_regS(cmpOp cop, eFlagsReg cr, regD dst, regD src) %{
7396 predicate (UseSSE>=2);
7397 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7398 ins_cost(200);
7399 format %{ "Jn$cop skip\n\t"
7400 "MOVSD $dst,$src\t# float\n"
7401 "skip:" %}
7402 ins_encode %{
7403 Label skip;
7404 // Invert sense of branch from sense of CMOV
7405 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
7406 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
7407 __ bind(skip);
7408 %}
7409 ins_pipe( pipe_slow );
7410 %}
7412 // unsigned version
7413 instruct fcmovF_regU(cmpOpU cop, eFlagsRegU cr, regF dst, regF src) %{
7414 predicate (UseSSE>=1);
7415 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7416 ins_cost(200);
7417 format %{ "Jn$cop skip\n\t"
7418 "MOVSS $dst,$src\t# float\n"
7419 "skip:" %}
7420 ins_encode %{
7421 Label skip;
7422 // Invert sense of branch from sense of CMOV
7423 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
7424 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
7425 __ bind(skip);
7426 %}
7427 ins_pipe( pipe_slow );
7428 %}
7430 instruct fcmovF_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regF dst, regF src) %{
7431 predicate (UseSSE>=1);
7432 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7433 ins_cost(200);
7434 expand %{
7435 fcmovF_regU(cop, cr, dst, src);
7436 %}
7437 %}
7439 // unsigned version
7440 instruct fcmovD_regU(cmpOpU cop, eFlagsRegU cr, regD dst, regD src) %{
7441 predicate (UseSSE>=2);
7442 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7443 ins_cost(200);
7444 format %{ "Jn$cop skip\n\t"
7445 "MOVSD $dst,$src\t# float\n"
7446 "skip:" %}
7447 ins_encode %{
7448 Label skip;
7449 // Invert sense of branch from sense of CMOV
7450 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
7451 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
7452 __ bind(skip);
7453 %}
7454 ins_pipe( pipe_slow );
7455 %}
7457 instruct fcmovD_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regD dst, regD src) %{
7458 predicate (UseSSE>=2);
7459 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7460 ins_cost(200);
7461 expand %{
7462 fcmovD_regU(cop, cr, dst, src);
7463 %}
7464 %}
7466 instruct cmovL_reg(cmpOp cop, eFlagsReg cr, eRegL dst, eRegL src) %{
7467 predicate(VM_Version::supports_cmov() );
7468 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7469 ins_cost(200);
7470 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
7471 "CMOV$cop $dst.hi,$src.hi" %}
7472 opcode(0x0F,0x40);
7473 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
7474 ins_pipe( pipe_cmov_reg_long );
7475 %}
7477 instruct cmovL_regU(cmpOpU cop, eFlagsRegU cr, eRegL dst, eRegL src) %{
7478 predicate(VM_Version::supports_cmov() );
7479 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7480 ins_cost(200);
7481 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
7482 "CMOV$cop $dst.hi,$src.hi" %}
7483 opcode(0x0F,0x40);
7484 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
7485 ins_pipe( pipe_cmov_reg_long );
7486 %}
7488 instruct cmovL_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegL dst, eRegL src) %{
7489 predicate(VM_Version::supports_cmov() );
7490 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7491 ins_cost(200);
7492 expand %{
7493 cmovL_regU(cop, cr, dst, src);
7494 %}
7495 %}
7497 //----------Arithmetic Instructions--------------------------------------------
7498 //----------Addition Instructions----------------------------------------------
7499 // Integer Addition Instructions
7500 instruct addI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7501 match(Set dst (AddI dst src));
7502 effect(KILL cr);
7504 size(2);
7505 format %{ "ADD $dst,$src" %}
7506 opcode(0x03);
7507 ins_encode( OpcP, RegReg( dst, src) );
7508 ins_pipe( ialu_reg_reg );
7509 %}
7511 instruct addI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
7512 match(Set dst (AddI dst src));
7513 effect(KILL cr);
7515 format %{ "ADD $dst,$src" %}
7516 opcode(0x81, 0x00); /* /0 id */
7517 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7518 ins_pipe( ialu_reg );
7519 %}
7521 instruct incI_eReg(rRegI dst, immI1 src, eFlagsReg cr) %{
7522 predicate(UseIncDec);
7523 match(Set dst (AddI dst src));
7524 effect(KILL cr);
7526 size(1);
7527 format %{ "INC $dst" %}
7528 opcode(0x40); /* */
7529 ins_encode( Opc_plus( primary, dst ) );
7530 ins_pipe( ialu_reg );
7531 %}
7533 instruct leaI_eReg_immI(rRegI dst, rRegI src0, immI src1) %{
7534 match(Set dst (AddI src0 src1));
7535 ins_cost(110);
7537 format %{ "LEA $dst,[$src0 + $src1]" %}
7538 opcode(0x8D); /* 0x8D /r */
7539 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
7540 ins_pipe( ialu_reg_reg );
7541 %}
7543 instruct leaP_eReg_immI(eRegP dst, eRegP src0, immI src1) %{
7544 match(Set dst (AddP src0 src1));
7545 ins_cost(110);
7547 format %{ "LEA $dst,[$src0 + $src1]\t# ptr" %}
7548 opcode(0x8D); /* 0x8D /r */
7549 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
7550 ins_pipe( ialu_reg_reg );
7551 %}
7553 instruct decI_eReg(rRegI dst, immI_M1 src, eFlagsReg cr) %{
7554 predicate(UseIncDec);
7555 match(Set dst (AddI dst src));
7556 effect(KILL cr);
7558 size(1);
7559 format %{ "DEC $dst" %}
7560 opcode(0x48); /* */
7561 ins_encode( Opc_plus( primary, dst ) );
7562 ins_pipe( ialu_reg );
7563 %}
7565 instruct addP_eReg(eRegP dst, rRegI src, eFlagsReg cr) %{
7566 match(Set dst (AddP dst src));
7567 effect(KILL cr);
7569 size(2);
7570 format %{ "ADD $dst,$src" %}
7571 opcode(0x03);
7572 ins_encode( OpcP, RegReg( dst, src) );
7573 ins_pipe( ialu_reg_reg );
7574 %}
7576 instruct addP_eReg_imm(eRegP dst, immI src, eFlagsReg cr) %{
7577 match(Set dst (AddP dst src));
7578 effect(KILL cr);
7580 format %{ "ADD $dst,$src" %}
7581 opcode(0x81,0x00); /* Opcode 81 /0 id */
7582 // ins_encode( RegImm( dst, src) );
7583 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7584 ins_pipe( ialu_reg );
7585 %}
7587 instruct addI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
7588 match(Set dst (AddI dst (LoadI src)));
7589 effect(KILL cr);
7591 ins_cost(125);
7592 format %{ "ADD $dst,$src" %}
7593 opcode(0x03);
7594 ins_encode( OpcP, RegMem( dst, src) );
7595 ins_pipe( ialu_reg_mem );
7596 %}
7598 instruct addI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
7599 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7600 effect(KILL cr);
7602 ins_cost(150);
7603 format %{ "ADD $dst,$src" %}
7604 opcode(0x01); /* Opcode 01 /r */
7605 ins_encode( OpcP, RegMem( src, dst ) );
7606 ins_pipe( ialu_mem_reg );
7607 %}
7609 // Add Memory with Immediate
7610 instruct addI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
7611 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7612 effect(KILL cr);
7614 ins_cost(125);
7615 format %{ "ADD $dst,$src" %}
7616 opcode(0x81); /* Opcode 81 /0 id */
7617 ins_encode( OpcSE( src ), RMopc_Mem(0x00,dst), Con8or32( src ) );
7618 ins_pipe( ialu_mem_imm );
7619 %}
7621 instruct incI_mem(memory dst, immI1 src, eFlagsReg cr) %{
7622 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7623 effect(KILL cr);
7625 ins_cost(125);
7626 format %{ "INC $dst" %}
7627 opcode(0xFF); /* Opcode FF /0 */
7628 ins_encode( OpcP, RMopc_Mem(0x00,dst));
7629 ins_pipe( ialu_mem_imm );
7630 %}
7632 instruct decI_mem(memory dst, immI_M1 src, eFlagsReg cr) %{
7633 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7634 effect(KILL cr);
7636 ins_cost(125);
7637 format %{ "DEC $dst" %}
7638 opcode(0xFF); /* Opcode FF /1 */
7639 ins_encode( OpcP, RMopc_Mem(0x01,dst));
7640 ins_pipe( ialu_mem_imm );
7641 %}
7644 instruct checkCastPP( eRegP dst ) %{
7645 match(Set dst (CheckCastPP dst));
7647 size(0);
7648 format %{ "#checkcastPP of $dst" %}
7649 ins_encode( /*empty encoding*/ );
7650 ins_pipe( empty );
7651 %}
7653 instruct castPP( eRegP dst ) %{
7654 match(Set dst (CastPP dst));
7655 format %{ "#castPP of $dst" %}
7656 ins_encode( /*empty encoding*/ );
7657 ins_pipe( empty );
7658 %}
7660 instruct castII( rRegI dst ) %{
7661 match(Set dst (CastII dst));
7662 format %{ "#castII of $dst" %}
7663 ins_encode( /*empty encoding*/ );
7664 ins_cost(0);
7665 ins_pipe( empty );
7666 %}
7669 // Load-locked - same as a regular pointer load when used with compare-swap
7670 instruct loadPLocked(eRegP dst, memory mem) %{
7671 match(Set dst (LoadPLocked mem));
7673 ins_cost(125);
7674 format %{ "MOV $dst,$mem\t# Load ptr. locked" %}
7675 opcode(0x8B);
7676 ins_encode( OpcP, RegMem(dst,mem));
7677 ins_pipe( ialu_reg_mem );
7678 %}
7680 // Conditional-store of the updated heap-top.
7681 // Used during allocation of the shared heap.
7682 // Sets flags (EQ) on success. Implemented with a CMPXCHG on Intel.
7683 instruct storePConditional( memory heap_top_ptr, eAXRegP oldval, eRegP newval, eFlagsReg cr ) %{
7684 match(Set cr (StorePConditional heap_top_ptr (Binary oldval newval)));
7685 // EAX is killed if there is contention, but then it's also unused.
7686 // In the common case of no contention, EAX holds the new oop address.
7687 format %{ "CMPXCHG $heap_top_ptr,$newval\t# If EAX==$heap_top_ptr Then store $newval into $heap_top_ptr" %}
7688 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval,heap_top_ptr) );
7689 ins_pipe( pipe_cmpxchg );
7690 %}
7692 // Conditional-store of an int value.
7693 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG on Intel.
7694 instruct storeIConditional( memory mem, eAXRegI oldval, rRegI newval, eFlagsReg cr ) %{
7695 match(Set cr (StoreIConditional mem (Binary oldval newval)));
7696 effect(KILL oldval);
7697 format %{ "CMPXCHG $mem,$newval\t# If EAX==$mem Then store $newval into $mem" %}
7698 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval, mem) );
7699 ins_pipe( pipe_cmpxchg );
7700 %}
7702 // Conditional-store of a long value.
7703 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG8 on Intel.
7704 instruct storeLConditional( memory mem, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
7705 match(Set cr (StoreLConditional mem (Binary oldval newval)));
7706 effect(KILL oldval);
7707 format %{ "XCHG EBX,ECX\t# correct order for CMPXCHG8 instruction\n\t"
7708 "CMPXCHG8 $mem,ECX:EBX\t# If EDX:EAX==$mem Then store ECX:EBX into $mem\n\t"
7709 "XCHG EBX,ECX"
7710 %}
7711 ins_encode %{
7712 // Note: we need to swap rbx, and rcx before and after the
7713 // cmpxchg8 instruction because the instruction uses
7714 // rcx as the high order word of the new value to store but
7715 // our register encoding uses rbx.
7716 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
7717 if( os::is_MP() )
7718 __ lock();
7719 __ cmpxchg8($mem$$Address);
7720 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
7721 %}
7722 ins_pipe( pipe_cmpxchg );
7723 %}
7725 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them
7727 instruct compareAndSwapL( rRegI res, eSIRegP mem_ptr, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
7728 predicate(VM_Version::supports_cx8());
7729 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval)));
7730 effect(KILL cr, KILL oldval);
7731 format %{ "CMPXCHG8 [$mem_ptr],$newval\t# If EDX:EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7732 "MOV $res,0\n\t"
7733 "JNE,s fail\n\t"
7734 "MOV $res,1\n"
7735 "fail:" %}
7736 ins_encode( enc_cmpxchg8(mem_ptr),
7737 enc_flags_ne_to_boolean(res) );
7738 ins_pipe( pipe_cmpxchg );
7739 %}
7741 instruct compareAndSwapP( rRegI res, pRegP mem_ptr, eAXRegP oldval, eCXRegP newval, eFlagsReg cr) %{
7742 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval)));
7743 effect(KILL cr, KILL oldval);
7744 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7745 "MOV $res,0\n\t"
7746 "JNE,s fail\n\t"
7747 "MOV $res,1\n"
7748 "fail:" %}
7749 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
7750 ins_pipe( pipe_cmpxchg );
7751 %}
7753 instruct compareAndSwapI( rRegI res, pRegP mem_ptr, eAXRegI oldval, eCXRegI newval, eFlagsReg cr) %{
7754 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval)));
7755 effect(KILL cr, KILL oldval);
7756 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7757 "MOV $res,0\n\t"
7758 "JNE,s fail\n\t"
7759 "MOV $res,1\n"
7760 "fail:" %}
7761 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
7762 ins_pipe( pipe_cmpxchg );
7763 %}
7765 instruct xaddI_no_res( memory mem, Universe dummy, immI add, eFlagsReg cr) %{
7766 predicate(n->as_LoadStore()->result_not_used());
7767 match(Set dummy (GetAndAddI mem add));
7768 effect(KILL cr);
7769 format %{ "ADDL [$mem],$add" %}
7770 ins_encode %{
7771 if (os::is_MP()) { __ lock(); }
7772 __ addl($mem$$Address, $add$$constant);
7773 %}
7774 ins_pipe( pipe_cmpxchg );
7775 %}
7777 instruct xaddI( memory mem, rRegI newval, eFlagsReg cr) %{
7778 match(Set newval (GetAndAddI mem newval));
7779 effect(KILL cr);
7780 format %{ "XADDL [$mem],$newval" %}
7781 ins_encode %{
7782 if (os::is_MP()) { __ lock(); }
7783 __ xaddl($mem$$Address, $newval$$Register);
7784 %}
7785 ins_pipe( pipe_cmpxchg );
7786 %}
7788 instruct xchgI( memory mem, rRegI newval) %{
7789 match(Set newval (GetAndSetI mem newval));
7790 format %{ "XCHGL $newval,[$mem]" %}
7791 ins_encode %{
7792 __ xchgl($newval$$Register, $mem$$Address);
7793 %}
7794 ins_pipe( pipe_cmpxchg );
7795 %}
7797 instruct xchgP( memory mem, pRegP newval) %{
7798 match(Set newval (GetAndSetP mem newval));
7799 format %{ "XCHGL $newval,[$mem]" %}
7800 ins_encode %{
7801 __ xchgl($newval$$Register, $mem$$Address);
7802 %}
7803 ins_pipe( pipe_cmpxchg );
7804 %}
7806 //----------Subtraction Instructions-------------------------------------------
7807 // Integer Subtraction Instructions
7808 instruct subI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7809 match(Set dst (SubI dst src));
7810 effect(KILL cr);
7812 size(2);
7813 format %{ "SUB $dst,$src" %}
7814 opcode(0x2B);
7815 ins_encode( OpcP, RegReg( dst, src) );
7816 ins_pipe( ialu_reg_reg );
7817 %}
7819 instruct subI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
7820 match(Set dst (SubI dst src));
7821 effect(KILL cr);
7823 format %{ "SUB $dst,$src" %}
7824 opcode(0x81,0x05); /* Opcode 81 /5 */
7825 // ins_encode( RegImm( dst, src) );
7826 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7827 ins_pipe( ialu_reg );
7828 %}
7830 instruct subI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
7831 match(Set dst (SubI dst (LoadI src)));
7832 effect(KILL cr);
7834 ins_cost(125);
7835 format %{ "SUB $dst,$src" %}
7836 opcode(0x2B);
7837 ins_encode( OpcP, RegMem( dst, src) );
7838 ins_pipe( ialu_reg_mem );
7839 %}
7841 instruct subI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
7842 match(Set dst (StoreI dst (SubI (LoadI dst) src)));
7843 effect(KILL cr);
7845 ins_cost(150);
7846 format %{ "SUB $dst,$src" %}
7847 opcode(0x29); /* Opcode 29 /r */
7848 ins_encode( OpcP, RegMem( src, dst ) );
7849 ins_pipe( ialu_mem_reg );
7850 %}
7852 // Subtract from a pointer
7853 instruct subP_eReg(eRegP dst, rRegI src, immI0 zero, eFlagsReg cr) %{
7854 match(Set dst (AddP dst (SubI zero src)));
7855 effect(KILL cr);
7857 size(2);
7858 format %{ "SUB $dst,$src" %}
7859 opcode(0x2B);
7860 ins_encode( OpcP, RegReg( dst, src) );
7861 ins_pipe( ialu_reg_reg );
7862 %}
7864 instruct negI_eReg(rRegI dst, immI0 zero, eFlagsReg cr) %{
7865 match(Set dst (SubI zero dst));
7866 effect(KILL cr);
7868 size(2);
7869 format %{ "NEG $dst" %}
7870 opcode(0xF7,0x03); // Opcode F7 /3
7871 ins_encode( OpcP, RegOpc( dst ) );
7872 ins_pipe( ialu_reg );
7873 %}
7876 //----------Multiplication/Division Instructions-------------------------------
7877 // Integer Multiplication Instructions
7878 // Multiply Register
7879 instruct mulI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7880 match(Set dst (MulI dst src));
7881 effect(KILL cr);
7883 size(3);
7884 ins_cost(300);
7885 format %{ "IMUL $dst,$src" %}
7886 opcode(0xAF, 0x0F);
7887 ins_encode( OpcS, OpcP, RegReg( dst, src) );
7888 ins_pipe( ialu_reg_reg_alu0 );
7889 %}
7891 // Multiply 32-bit Immediate
7892 instruct mulI_eReg_imm(rRegI dst, rRegI src, immI imm, eFlagsReg cr) %{
7893 match(Set dst (MulI src imm));
7894 effect(KILL cr);
7896 ins_cost(300);
7897 format %{ "IMUL $dst,$src,$imm" %}
7898 opcode(0x69); /* 69 /r id */
7899 ins_encode( OpcSE(imm), RegReg( dst, src ), Con8or32( imm ) );
7900 ins_pipe( ialu_reg_reg_alu0 );
7901 %}
7903 instruct loadConL_low_only(eADXRegL_low_only dst, immL32 src, eFlagsReg cr) %{
7904 match(Set dst src);
7905 effect(KILL cr);
7907 // Note that this is artificially increased to make it more expensive than loadConL
7908 ins_cost(250);
7909 format %{ "MOV EAX,$src\t// low word only" %}
7910 opcode(0xB8);
7911 ins_encode( LdImmL_Lo(dst, src) );
7912 ins_pipe( ialu_reg_fat );
7913 %}
7915 // Multiply by 32-bit Immediate, taking the shifted high order results
7916 // (special case for shift by 32)
7917 instruct mulI_imm_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32 cnt, eFlagsReg cr) %{
7918 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
7919 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
7920 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
7921 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
7922 effect(USE src1, KILL cr);
7924 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
7925 ins_cost(0*100 + 1*400 - 150);
7926 format %{ "IMUL EDX:EAX,$src1" %}
7927 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
7928 ins_pipe( pipe_slow );
7929 %}
7931 // Multiply by 32-bit Immediate, taking the shifted high order results
7932 instruct mulI_imm_RShift_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr) %{
7933 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
7934 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
7935 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
7936 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
7937 effect(USE src1, KILL cr);
7939 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
7940 ins_cost(1*100 + 1*400 - 150);
7941 format %{ "IMUL EDX:EAX,$src1\n\t"
7942 "SAR EDX,$cnt-32" %}
7943 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
7944 ins_pipe( pipe_slow );
7945 %}
7947 // Multiply Memory 32-bit Immediate
7948 instruct mulI_mem_imm(rRegI dst, memory src, immI imm, eFlagsReg cr) %{
7949 match(Set dst (MulI (LoadI src) imm));
7950 effect(KILL cr);
7952 ins_cost(300);
7953 format %{ "IMUL $dst,$src,$imm" %}
7954 opcode(0x69); /* 69 /r id */
7955 ins_encode( OpcSE(imm), RegMem( dst, src ), Con8or32( imm ) );
7956 ins_pipe( ialu_reg_mem_alu0 );
7957 %}
7959 // Multiply Memory
7960 instruct mulI(rRegI dst, memory src, eFlagsReg cr) %{
7961 match(Set dst (MulI dst (LoadI src)));
7962 effect(KILL cr);
7964 ins_cost(350);
7965 format %{ "IMUL $dst,$src" %}
7966 opcode(0xAF, 0x0F);
7967 ins_encode( OpcS, OpcP, RegMem( dst, src) );
7968 ins_pipe( ialu_reg_mem_alu0 );
7969 %}
7971 // Multiply Register Int to Long
7972 instruct mulI2L(eADXRegL dst, eAXRegI src, nadxRegI src1, eFlagsReg flags) %{
7973 // Basic Idea: long = (long)int * (long)int
7974 match(Set dst (MulL (ConvI2L src) (ConvI2L src1)));
7975 effect(DEF dst, USE src, USE src1, KILL flags);
7977 ins_cost(300);
7978 format %{ "IMUL $dst,$src1" %}
7980 ins_encode( long_int_multiply( dst, src1 ) );
7981 ins_pipe( ialu_reg_reg_alu0 );
7982 %}
7984 instruct mulIS_eReg(eADXRegL dst, immL_32bits mask, eFlagsReg flags, eAXRegI src, nadxRegI src1) %{
7985 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
7986 match(Set dst (MulL (AndL (ConvI2L src) mask) (AndL (ConvI2L src1) mask)));
7987 effect(KILL flags);
7989 ins_cost(300);
7990 format %{ "MUL $dst,$src1" %}
7992 ins_encode( long_uint_multiply(dst, src1) );
7993 ins_pipe( ialu_reg_reg_alu0 );
7994 %}
7996 // Multiply Register Long
7997 instruct mulL_eReg(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
7998 match(Set dst (MulL dst src));
7999 effect(KILL cr, TEMP tmp);
8000 ins_cost(4*100+3*400);
8001 // Basic idea: lo(result) = lo(x_lo * y_lo)
8002 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
8003 format %{ "MOV $tmp,$src.lo\n\t"
8004 "IMUL $tmp,EDX\n\t"
8005 "MOV EDX,$src.hi\n\t"
8006 "IMUL EDX,EAX\n\t"
8007 "ADD $tmp,EDX\n\t"
8008 "MUL EDX:EAX,$src.lo\n\t"
8009 "ADD EDX,$tmp" %}
8010 ins_encode( long_multiply( dst, src, tmp ) );
8011 ins_pipe( pipe_slow );
8012 %}
8014 // Multiply Register Long where the left operand's high 32 bits are zero
8015 instruct mulL_eReg_lhi0(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
8016 predicate(is_operand_hi32_zero(n->in(1)));
8017 match(Set dst (MulL dst src));
8018 effect(KILL cr, TEMP tmp);
8019 ins_cost(2*100+2*400);
8020 // Basic idea: lo(result) = lo(x_lo * y_lo)
8021 // hi(result) = hi(x_lo * y_lo) + lo(x_lo * y_hi) where lo(x_hi * y_lo) = 0 because x_hi = 0
8022 format %{ "MOV $tmp,$src.hi\n\t"
8023 "IMUL $tmp,EAX\n\t"
8024 "MUL EDX:EAX,$src.lo\n\t"
8025 "ADD EDX,$tmp" %}
8026 ins_encode %{
8027 __ movl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
8028 __ imull($tmp$$Register, rax);
8029 __ mull($src$$Register);
8030 __ addl(rdx, $tmp$$Register);
8031 %}
8032 ins_pipe( pipe_slow );
8033 %}
8035 // Multiply Register Long where the right operand's high 32 bits are zero
8036 instruct mulL_eReg_rhi0(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
8037 predicate(is_operand_hi32_zero(n->in(2)));
8038 match(Set dst (MulL dst src));
8039 effect(KILL cr, TEMP tmp);
8040 ins_cost(2*100+2*400);
8041 // Basic idea: lo(result) = lo(x_lo * y_lo)
8042 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) where lo(x_lo * y_hi) = 0 because y_hi = 0
8043 format %{ "MOV $tmp,$src.lo\n\t"
8044 "IMUL $tmp,EDX\n\t"
8045 "MUL EDX:EAX,$src.lo\n\t"
8046 "ADD EDX,$tmp" %}
8047 ins_encode %{
8048 __ movl($tmp$$Register, $src$$Register);
8049 __ imull($tmp$$Register, rdx);
8050 __ mull($src$$Register);
8051 __ addl(rdx, $tmp$$Register);
8052 %}
8053 ins_pipe( pipe_slow );
8054 %}
8056 // Multiply Register Long where the left and the right operands' high 32 bits are zero
8057 instruct mulL_eReg_hi0(eADXRegL dst, eRegL src, eFlagsReg cr) %{
8058 predicate(is_operand_hi32_zero(n->in(1)) && is_operand_hi32_zero(n->in(2)));
8059 match(Set dst (MulL dst src));
8060 effect(KILL cr);
8061 ins_cost(1*400);
8062 // Basic idea: lo(result) = lo(x_lo * y_lo)
8063 // hi(result) = hi(x_lo * y_lo) where lo(x_hi * y_lo) = 0 and lo(x_lo * y_hi) = 0 because x_hi = 0 and y_hi = 0
8064 format %{ "MUL EDX:EAX,$src.lo\n\t" %}
8065 ins_encode %{
8066 __ mull($src$$Register);
8067 %}
8068 ins_pipe( pipe_slow );
8069 %}
8071 // Multiply Register Long by small constant
8072 instruct mulL_eReg_con(eADXRegL dst, immL_127 src, rRegI tmp, eFlagsReg cr) %{
8073 match(Set dst (MulL dst src));
8074 effect(KILL cr, TEMP tmp);
8075 ins_cost(2*100+2*400);
8076 size(12);
8077 // Basic idea: lo(result) = lo(src * EAX)
8078 // hi(result) = hi(src * EAX) + lo(src * EDX)
8079 format %{ "IMUL $tmp,EDX,$src\n\t"
8080 "MOV EDX,$src\n\t"
8081 "MUL EDX\t# EDX*EAX -> EDX:EAX\n\t"
8082 "ADD EDX,$tmp" %}
8083 ins_encode( long_multiply_con( dst, src, tmp ) );
8084 ins_pipe( pipe_slow );
8085 %}
8087 // Integer DIV with Register
8088 instruct divI_eReg(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8089 match(Set rax (DivI rax div));
8090 effect(KILL rdx, KILL cr);
8091 size(26);
8092 ins_cost(30*100+10*100);
8093 format %{ "CMP EAX,0x80000000\n\t"
8094 "JNE,s normal\n\t"
8095 "XOR EDX,EDX\n\t"
8096 "CMP ECX,-1\n\t"
8097 "JE,s done\n"
8098 "normal: CDQ\n\t"
8099 "IDIV $div\n\t"
8100 "done:" %}
8101 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8102 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8103 ins_pipe( ialu_reg_reg_alu0 );
8104 %}
8106 // Divide Register Long
8107 instruct divL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8108 match(Set dst (DivL src1 src2));
8109 effect( KILL cr, KILL cx, KILL bx );
8110 ins_cost(10000);
8111 format %{ "PUSH $src1.hi\n\t"
8112 "PUSH $src1.lo\n\t"
8113 "PUSH $src2.hi\n\t"
8114 "PUSH $src2.lo\n\t"
8115 "CALL SharedRuntime::ldiv\n\t"
8116 "ADD ESP,16" %}
8117 ins_encode( long_div(src1,src2) );
8118 ins_pipe( pipe_slow );
8119 %}
8121 // Integer DIVMOD with Register, both quotient and mod results
8122 instruct divModI_eReg_divmod(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8123 match(DivModI rax div);
8124 effect(KILL cr);
8125 size(26);
8126 ins_cost(30*100+10*100);
8127 format %{ "CMP EAX,0x80000000\n\t"
8128 "JNE,s normal\n\t"
8129 "XOR EDX,EDX\n\t"
8130 "CMP ECX,-1\n\t"
8131 "JE,s done\n"
8132 "normal: CDQ\n\t"
8133 "IDIV $div\n\t"
8134 "done:" %}
8135 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8136 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8137 ins_pipe( pipe_slow );
8138 %}
8140 // Integer MOD with Register
8141 instruct modI_eReg(eDXRegI rdx, eAXRegI rax, eCXRegI div, eFlagsReg cr) %{
8142 match(Set rdx (ModI rax div));
8143 effect(KILL rax, KILL cr);
8145 size(26);
8146 ins_cost(300);
8147 format %{ "CDQ\n\t"
8148 "IDIV $div" %}
8149 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8150 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8151 ins_pipe( ialu_reg_reg_alu0 );
8152 %}
8154 // Remainder Register Long
8155 instruct modL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8156 match(Set dst (ModL src1 src2));
8157 effect( KILL cr, KILL cx, KILL bx );
8158 ins_cost(10000);
8159 format %{ "PUSH $src1.hi\n\t"
8160 "PUSH $src1.lo\n\t"
8161 "PUSH $src2.hi\n\t"
8162 "PUSH $src2.lo\n\t"
8163 "CALL SharedRuntime::lrem\n\t"
8164 "ADD ESP,16" %}
8165 ins_encode( long_mod(src1,src2) );
8166 ins_pipe( pipe_slow );
8167 %}
8169 // Divide Register Long (no special case since divisor != -1)
8170 instruct divL_eReg_imm32( eADXRegL dst, immL32 imm, rRegI tmp, rRegI tmp2, eFlagsReg cr ) %{
8171 match(Set dst (DivL dst imm));
8172 effect( TEMP tmp, TEMP tmp2, KILL cr );
8173 ins_cost(1000);
8174 format %{ "MOV $tmp,abs($imm) # ldiv EDX:EAX,$imm\n\t"
8175 "XOR $tmp2,$tmp2\n\t"
8176 "CMP $tmp,EDX\n\t"
8177 "JA,s fast\n\t"
8178 "MOV $tmp2,EAX\n\t"
8179 "MOV EAX,EDX\n\t"
8180 "MOV EDX,0\n\t"
8181 "JLE,s pos\n\t"
8182 "LNEG EAX : $tmp2\n\t"
8183 "DIV $tmp # unsigned division\n\t"
8184 "XCHG EAX,$tmp2\n\t"
8185 "DIV $tmp\n\t"
8186 "LNEG $tmp2 : EAX\n\t"
8187 "JMP,s done\n"
8188 "pos:\n\t"
8189 "DIV $tmp\n\t"
8190 "XCHG EAX,$tmp2\n"
8191 "fast:\n\t"
8192 "DIV $tmp\n"
8193 "done:\n\t"
8194 "MOV EDX,$tmp2\n\t"
8195 "NEG EDX:EAX # if $imm < 0" %}
8196 ins_encode %{
8197 int con = (int)$imm$$constant;
8198 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8199 int pcon = (con > 0) ? con : -con;
8200 Label Lfast, Lpos, Ldone;
8202 __ movl($tmp$$Register, pcon);
8203 __ xorl($tmp2$$Register,$tmp2$$Register);
8204 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8205 __ jccb(Assembler::above, Lfast); // result fits into 32 bit
8207 __ movl($tmp2$$Register, $dst$$Register); // save
8208 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8209 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8210 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8212 // Negative dividend.
8213 // convert value to positive to use unsigned division
8214 __ lneg($dst$$Register, $tmp2$$Register);
8215 __ divl($tmp$$Register);
8216 __ xchgl($dst$$Register, $tmp2$$Register);
8217 __ divl($tmp$$Register);
8218 // revert result back to negative
8219 __ lneg($tmp2$$Register, $dst$$Register);
8220 __ jmpb(Ldone);
8222 __ bind(Lpos);
8223 __ divl($tmp$$Register); // Use unsigned division
8224 __ xchgl($dst$$Register, $tmp2$$Register);
8225 // Fallthrow for final divide, tmp2 has 32 bit hi result
8227 __ bind(Lfast);
8228 // fast path: src is positive
8229 __ divl($tmp$$Register); // Use unsigned division
8231 __ bind(Ldone);
8232 __ movl(HIGH_FROM_LOW($dst$$Register),$tmp2$$Register);
8233 if (con < 0) {
8234 __ lneg(HIGH_FROM_LOW($dst$$Register), $dst$$Register);
8235 }
8236 %}
8237 ins_pipe( pipe_slow );
8238 %}
8240 // Remainder Register Long (remainder fit into 32 bits)
8241 instruct modL_eReg_imm32( eADXRegL dst, immL32 imm, rRegI tmp, rRegI tmp2, eFlagsReg cr ) %{
8242 match(Set dst (ModL dst imm));
8243 effect( TEMP tmp, TEMP tmp2, KILL cr );
8244 ins_cost(1000);
8245 format %{ "MOV $tmp,abs($imm) # lrem EDX:EAX,$imm\n\t"
8246 "CMP $tmp,EDX\n\t"
8247 "JA,s fast\n\t"
8248 "MOV $tmp2,EAX\n\t"
8249 "MOV EAX,EDX\n\t"
8250 "MOV EDX,0\n\t"
8251 "JLE,s pos\n\t"
8252 "LNEG EAX : $tmp2\n\t"
8253 "DIV $tmp # unsigned division\n\t"
8254 "MOV EAX,$tmp2\n\t"
8255 "DIV $tmp\n\t"
8256 "NEG EDX\n\t"
8257 "JMP,s done\n"
8258 "pos:\n\t"
8259 "DIV $tmp\n\t"
8260 "MOV EAX,$tmp2\n"
8261 "fast:\n\t"
8262 "DIV $tmp\n"
8263 "done:\n\t"
8264 "MOV EAX,EDX\n\t"
8265 "SAR EDX,31\n\t" %}
8266 ins_encode %{
8267 int con = (int)$imm$$constant;
8268 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8269 int pcon = (con > 0) ? con : -con;
8270 Label Lfast, Lpos, Ldone;
8272 __ movl($tmp$$Register, pcon);
8273 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8274 __ jccb(Assembler::above, Lfast); // src is positive and result fits into 32 bit
8276 __ movl($tmp2$$Register, $dst$$Register); // save
8277 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8278 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8279 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8281 // Negative dividend.
8282 // convert value to positive to use unsigned division
8283 __ lneg($dst$$Register, $tmp2$$Register);
8284 __ divl($tmp$$Register);
8285 __ movl($dst$$Register, $tmp2$$Register);
8286 __ divl($tmp$$Register);
8287 // revert remainder back to negative
8288 __ negl(HIGH_FROM_LOW($dst$$Register));
8289 __ jmpb(Ldone);
8291 __ bind(Lpos);
8292 __ divl($tmp$$Register);
8293 __ movl($dst$$Register, $tmp2$$Register);
8295 __ bind(Lfast);
8296 // fast path: src is positive
8297 __ divl($tmp$$Register);
8299 __ bind(Ldone);
8300 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8301 __ sarl(HIGH_FROM_LOW($dst$$Register), 31); // result sign
8303 %}
8304 ins_pipe( pipe_slow );
8305 %}
8307 // Integer Shift Instructions
8308 // Shift Left by one
8309 instruct shlI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8310 match(Set dst (LShiftI dst shift));
8311 effect(KILL cr);
8313 size(2);
8314 format %{ "SHL $dst,$shift" %}
8315 opcode(0xD1, 0x4); /* D1 /4 */
8316 ins_encode( OpcP, RegOpc( dst ) );
8317 ins_pipe( ialu_reg );
8318 %}
8320 // Shift Left by 8-bit immediate
8321 instruct salI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
8322 match(Set dst (LShiftI dst shift));
8323 effect(KILL cr);
8325 size(3);
8326 format %{ "SHL $dst,$shift" %}
8327 opcode(0xC1, 0x4); /* C1 /4 ib */
8328 ins_encode( RegOpcImm( dst, shift) );
8329 ins_pipe( ialu_reg );
8330 %}
8332 // Shift Left by variable
8333 instruct salI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
8334 match(Set dst (LShiftI dst shift));
8335 effect(KILL cr);
8337 size(2);
8338 format %{ "SHL $dst,$shift" %}
8339 opcode(0xD3, 0x4); /* D3 /4 */
8340 ins_encode( OpcP, RegOpc( dst ) );
8341 ins_pipe( ialu_reg_reg );
8342 %}
8344 // Arithmetic shift right by one
8345 instruct sarI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8346 match(Set dst (RShiftI dst shift));
8347 effect(KILL cr);
8349 size(2);
8350 format %{ "SAR $dst,$shift" %}
8351 opcode(0xD1, 0x7); /* D1 /7 */
8352 ins_encode( OpcP, RegOpc( dst ) );
8353 ins_pipe( ialu_reg );
8354 %}
8356 // Arithmetic shift right by one
8357 instruct sarI_mem_1(memory dst, immI1 shift, eFlagsReg cr) %{
8358 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
8359 effect(KILL cr);
8360 format %{ "SAR $dst,$shift" %}
8361 opcode(0xD1, 0x7); /* D1 /7 */
8362 ins_encode( OpcP, RMopc_Mem(secondary,dst) );
8363 ins_pipe( ialu_mem_imm );
8364 %}
8366 // Arithmetic Shift Right by 8-bit immediate
8367 instruct sarI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
8368 match(Set dst (RShiftI dst shift));
8369 effect(KILL cr);
8371 size(3);
8372 format %{ "SAR $dst,$shift" %}
8373 opcode(0xC1, 0x7); /* C1 /7 ib */
8374 ins_encode( RegOpcImm( dst, shift ) );
8375 ins_pipe( ialu_mem_imm );
8376 %}
8378 // Arithmetic Shift Right by 8-bit immediate
8379 instruct sarI_mem_imm(memory dst, immI8 shift, eFlagsReg cr) %{
8380 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
8381 effect(KILL cr);
8383 format %{ "SAR $dst,$shift" %}
8384 opcode(0xC1, 0x7); /* C1 /7 ib */
8385 ins_encode( OpcP, RMopc_Mem(secondary, dst ), Con8or32( shift ) );
8386 ins_pipe( ialu_mem_imm );
8387 %}
8389 // Arithmetic Shift Right by variable
8390 instruct sarI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
8391 match(Set dst (RShiftI dst shift));
8392 effect(KILL cr);
8394 size(2);
8395 format %{ "SAR $dst,$shift" %}
8396 opcode(0xD3, 0x7); /* D3 /7 */
8397 ins_encode( OpcP, RegOpc( dst ) );
8398 ins_pipe( ialu_reg_reg );
8399 %}
8401 // Logical shift right by one
8402 instruct shrI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8403 match(Set dst (URShiftI dst shift));
8404 effect(KILL cr);
8406 size(2);
8407 format %{ "SHR $dst,$shift" %}
8408 opcode(0xD1, 0x5); /* D1 /5 */
8409 ins_encode( OpcP, RegOpc( dst ) );
8410 ins_pipe( ialu_reg );
8411 %}
8413 // Logical Shift Right by 8-bit immediate
8414 instruct shrI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
8415 match(Set dst (URShiftI dst shift));
8416 effect(KILL cr);
8418 size(3);
8419 format %{ "SHR $dst,$shift" %}
8420 opcode(0xC1, 0x5); /* C1 /5 ib */
8421 ins_encode( RegOpcImm( dst, shift) );
8422 ins_pipe( ialu_reg );
8423 %}
8426 // Logical Shift Right by 24, followed by Arithmetic Shift Left by 24.
8427 // This idiom is used by the compiler for the i2b bytecode.
8428 instruct i2b(rRegI dst, xRegI src, immI_24 twentyfour) %{
8429 match(Set dst (RShiftI (LShiftI src twentyfour) twentyfour));
8431 size(3);
8432 format %{ "MOVSX $dst,$src :8" %}
8433 ins_encode %{
8434 __ movsbl($dst$$Register, $src$$Register);
8435 %}
8436 ins_pipe(ialu_reg_reg);
8437 %}
8439 // Logical Shift Right by 16, followed by Arithmetic Shift Left by 16.
8440 // This idiom is used by the compiler the i2s bytecode.
8441 instruct i2s(rRegI dst, xRegI src, immI_16 sixteen) %{
8442 match(Set dst (RShiftI (LShiftI src sixteen) sixteen));
8444 size(3);
8445 format %{ "MOVSX $dst,$src :16" %}
8446 ins_encode %{
8447 __ movswl($dst$$Register, $src$$Register);
8448 %}
8449 ins_pipe(ialu_reg_reg);
8450 %}
8453 // Logical Shift Right by variable
8454 instruct shrI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
8455 match(Set dst (URShiftI dst shift));
8456 effect(KILL cr);
8458 size(2);
8459 format %{ "SHR $dst,$shift" %}
8460 opcode(0xD3, 0x5); /* D3 /5 */
8461 ins_encode( OpcP, RegOpc( dst ) );
8462 ins_pipe( ialu_reg_reg );
8463 %}
8466 //----------Logical Instructions-----------------------------------------------
8467 //----------Integer Logical Instructions---------------------------------------
8468 // And Instructions
8469 // And Register with Register
8470 instruct andI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8471 match(Set dst (AndI dst src));
8472 effect(KILL cr);
8474 size(2);
8475 format %{ "AND $dst,$src" %}
8476 opcode(0x23);
8477 ins_encode( OpcP, RegReg( dst, src) );
8478 ins_pipe( ialu_reg_reg );
8479 %}
8481 // And Register with Immediate
8482 instruct andI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8483 match(Set dst (AndI dst src));
8484 effect(KILL cr);
8486 format %{ "AND $dst,$src" %}
8487 opcode(0x81,0x04); /* Opcode 81 /4 */
8488 // ins_encode( RegImm( dst, src) );
8489 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8490 ins_pipe( ialu_reg );
8491 %}
8493 // And Register with Memory
8494 instruct andI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8495 match(Set dst (AndI dst (LoadI src)));
8496 effect(KILL cr);
8498 ins_cost(125);
8499 format %{ "AND $dst,$src" %}
8500 opcode(0x23);
8501 ins_encode( OpcP, RegMem( dst, src) );
8502 ins_pipe( ialu_reg_mem );
8503 %}
8505 // And Memory with Register
8506 instruct andI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8507 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
8508 effect(KILL cr);
8510 ins_cost(150);
8511 format %{ "AND $dst,$src" %}
8512 opcode(0x21); /* Opcode 21 /r */
8513 ins_encode( OpcP, RegMem( src, dst ) );
8514 ins_pipe( ialu_mem_reg );
8515 %}
8517 // And Memory with Immediate
8518 instruct andI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8519 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
8520 effect(KILL cr);
8522 ins_cost(125);
8523 format %{ "AND $dst,$src" %}
8524 opcode(0x81, 0x4); /* Opcode 81 /4 id */
8525 // ins_encode( MemImm( dst, src) );
8526 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8527 ins_pipe( ialu_mem_imm );
8528 %}
8530 // Or Instructions
8531 // Or Register with Register
8532 instruct orI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8533 match(Set dst (OrI dst src));
8534 effect(KILL cr);
8536 size(2);
8537 format %{ "OR $dst,$src" %}
8538 opcode(0x0B);
8539 ins_encode( OpcP, RegReg( dst, src) );
8540 ins_pipe( ialu_reg_reg );
8541 %}
8543 instruct orI_eReg_castP2X(rRegI dst, eRegP src, eFlagsReg cr) %{
8544 match(Set dst (OrI dst (CastP2X src)));
8545 effect(KILL cr);
8547 size(2);
8548 format %{ "OR $dst,$src" %}
8549 opcode(0x0B);
8550 ins_encode( OpcP, RegReg( dst, src) );
8551 ins_pipe( ialu_reg_reg );
8552 %}
8555 // Or Register with Immediate
8556 instruct orI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8557 match(Set dst (OrI dst src));
8558 effect(KILL cr);
8560 format %{ "OR $dst,$src" %}
8561 opcode(0x81,0x01); /* Opcode 81 /1 id */
8562 // ins_encode( RegImm( dst, src) );
8563 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8564 ins_pipe( ialu_reg );
8565 %}
8567 // Or Register with Memory
8568 instruct orI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8569 match(Set dst (OrI dst (LoadI src)));
8570 effect(KILL cr);
8572 ins_cost(125);
8573 format %{ "OR $dst,$src" %}
8574 opcode(0x0B);
8575 ins_encode( OpcP, RegMem( dst, src) );
8576 ins_pipe( ialu_reg_mem );
8577 %}
8579 // Or Memory with Register
8580 instruct orI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8581 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
8582 effect(KILL cr);
8584 ins_cost(150);
8585 format %{ "OR $dst,$src" %}
8586 opcode(0x09); /* Opcode 09 /r */
8587 ins_encode( OpcP, RegMem( src, dst ) );
8588 ins_pipe( ialu_mem_reg );
8589 %}
8591 // Or Memory with Immediate
8592 instruct orI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8593 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
8594 effect(KILL cr);
8596 ins_cost(125);
8597 format %{ "OR $dst,$src" %}
8598 opcode(0x81,0x1); /* Opcode 81 /1 id */
8599 // ins_encode( MemImm( dst, src) );
8600 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8601 ins_pipe( ialu_mem_imm );
8602 %}
8604 // ROL/ROR
8605 // ROL expand
8606 instruct rolI_eReg_imm1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8607 effect(USE_DEF dst, USE shift, KILL cr);
8609 format %{ "ROL $dst, $shift" %}
8610 opcode(0xD1, 0x0); /* Opcode D1 /0 */
8611 ins_encode( OpcP, RegOpc( dst ));
8612 ins_pipe( ialu_reg );
8613 %}
8615 instruct rolI_eReg_imm8(rRegI dst, immI8 shift, eFlagsReg cr) %{
8616 effect(USE_DEF dst, USE shift, KILL cr);
8618 format %{ "ROL $dst, $shift" %}
8619 opcode(0xC1, 0x0); /*Opcode /C1 /0 */
8620 ins_encode( RegOpcImm(dst, shift) );
8621 ins_pipe(ialu_reg);
8622 %}
8624 instruct rolI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr) %{
8625 effect(USE_DEF dst, USE shift, KILL cr);
8627 format %{ "ROL $dst, $shift" %}
8628 opcode(0xD3, 0x0); /* Opcode D3 /0 */
8629 ins_encode(OpcP, RegOpc(dst));
8630 ins_pipe( ialu_reg_reg );
8631 %}
8632 // end of ROL expand
8634 // ROL 32bit by one once
8635 instruct rolI_eReg_i1(rRegI dst, immI1 lshift, immI_M1 rshift, eFlagsReg cr) %{
8636 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
8638 expand %{
8639 rolI_eReg_imm1(dst, lshift, cr);
8640 %}
8641 %}
8643 // ROL 32bit var by imm8 once
8644 instruct rolI_eReg_i8(rRegI dst, immI8 lshift, immI8 rshift, eFlagsReg cr) %{
8645 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
8646 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
8648 expand %{
8649 rolI_eReg_imm8(dst, lshift, cr);
8650 %}
8651 %}
8653 // ROL 32bit var by var once
8654 instruct rolI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
8655 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI zero shift))));
8657 expand %{
8658 rolI_eReg_CL(dst, shift, cr);
8659 %}
8660 %}
8662 // ROL 32bit var by var once
8663 instruct rolI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
8664 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI c32 shift))));
8666 expand %{
8667 rolI_eReg_CL(dst, shift, cr);
8668 %}
8669 %}
8671 // ROR expand
8672 instruct rorI_eReg_imm1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8673 effect(USE_DEF dst, USE shift, KILL cr);
8675 format %{ "ROR $dst, $shift" %}
8676 opcode(0xD1,0x1); /* Opcode D1 /1 */
8677 ins_encode( OpcP, RegOpc( dst ) );
8678 ins_pipe( ialu_reg );
8679 %}
8681 instruct rorI_eReg_imm8(rRegI dst, immI8 shift, eFlagsReg cr) %{
8682 effect (USE_DEF dst, USE shift, KILL cr);
8684 format %{ "ROR $dst, $shift" %}
8685 opcode(0xC1, 0x1); /* Opcode /C1 /1 ib */
8686 ins_encode( RegOpcImm(dst, shift) );
8687 ins_pipe( ialu_reg );
8688 %}
8690 instruct rorI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr)%{
8691 effect(USE_DEF dst, USE shift, KILL cr);
8693 format %{ "ROR $dst, $shift" %}
8694 opcode(0xD3, 0x1); /* Opcode D3 /1 */
8695 ins_encode(OpcP, RegOpc(dst));
8696 ins_pipe( ialu_reg_reg );
8697 %}
8698 // end of ROR expand
8700 // ROR right once
8701 instruct rorI_eReg_i1(rRegI dst, immI1 rshift, immI_M1 lshift, eFlagsReg cr) %{
8702 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
8704 expand %{
8705 rorI_eReg_imm1(dst, rshift, cr);
8706 %}
8707 %}
8709 // ROR 32bit by immI8 once
8710 instruct rorI_eReg_i8(rRegI dst, immI8 rshift, immI8 lshift, eFlagsReg cr) %{
8711 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
8712 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
8714 expand %{
8715 rorI_eReg_imm8(dst, rshift, cr);
8716 %}
8717 %}
8719 // ROR 32bit var by var once
8720 instruct rorI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
8721 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI zero shift))));
8723 expand %{
8724 rorI_eReg_CL(dst, shift, cr);
8725 %}
8726 %}
8728 // ROR 32bit var by var once
8729 instruct rorI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
8730 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI c32 shift))));
8732 expand %{
8733 rorI_eReg_CL(dst, shift, cr);
8734 %}
8735 %}
8737 // Xor Instructions
8738 // Xor Register with Register
8739 instruct xorI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8740 match(Set dst (XorI dst src));
8741 effect(KILL cr);
8743 size(2);
8744 format %{ "XOR $dst,$src" %}
8745 opcode(0x33);
8746 ins_encode( OpcP, RegReg( dst, src) );
8747 ins_pipe( ialu_reg_reg );
8748 %}
8750 // Xor Register with Immediate -1
8751 instruct xorI_eReg_im1(rRegI dst, immI_M1 imm) %{
8752 match(Set dst (XorI dst imm));
8754 size(2);
8755 format %{ "NOT $dst" %}
8756 ins_encode %{
8757 __ notl($dst$$Register);
8758 %}
8759 ins_pipe( ialu_reg );
8760 %}
8762 // Xor Register with Immediate
8763 instruct xorI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8764 match(Set dst (XorI dst src));
8765 effect(KILL cr);
8767 format %{ "XOR $dst,$src" %}
8768 opcode(0x81,0x06); /* Opcode 81 /6 id */
8769 // ins_encode( RegImm( dst, src) );
8770 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8771 ins_pipe( ialu_reg );
8772 %}
8774 // Xor Register with Memory
8775 instruct xorI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8776 match(Set dst (XorI dst (LoadI src)));
8777 effect(KILL cr);
8779 ins_cost(125);
8780 format %{ "XOR $dst,$src" %}
8781 opcode(0x33);
8782 ins_encode( OpcP, RegMem(dst, src) );
8783 ins_pipe( ialu_reg_mem );
8784 %}
8786 // Xor Memory with Register
8787 instruct xorI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8788 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
8789 effect(KILL cr);
8791 ins_cost(150);
8792 format %{ "XOR $dst,$src" %}
8793 opcode(0x31); /* Opcode 31 /r */
8794 ins_encode( OpcP, RegMem( src, dst ) );
8795 ins_pipe( ialu_mem_reg );
8796 %}
8798 // Xor Memory with Immediate
8799 instruct xorI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8800 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
8801 effect(KILL cr);
8803 ins_cost(125);
8804 format %{ "XOR $dst,$src" %}
8805 opcode(0x81,0x6); /* Opcode 81 /6 id */
8806 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8807 ins_pipe( ialu_mem_imm );
8808 %}
8810 //----------Convert Int to Boolean---------------------------------------------
8812 instruct movI_nocopy(rRegI dst, rRegI src) %{
8813 effect( DEF dst, USE src );
8814 format %{ "MOV $dst,$src" %}
8815 ins_encode( enc_Copy( dst, src) );
8816 ins_pipe( ialu_reg_reg );
8817 %}
8819 instruct ci2b( rRegI dst, rRegI src, eFlagsReg cr ) %{
8820 effect( USE_DEF dst, USE src, KILL cr );
8822 size(4);
8823 format %{ "NEG $dst\n\t"
8824 "ADC $dst,$src" %}
8825 ins_encode( neg_reg(dst),
8826 OpcRegReg(0x13,dst,src) );
8827 ins_pipe( ialu_reg_reg_long );
8828 %}
8830 instruct convI2B( rRegI dst, rRegI src, eFlagsReg cr ) %{
8831 match(Set dst (Conv2B src));
8833 expand %{
8834 movI_nocopy(dst,src);
8835 ci2b(dst,src,cr);
8836 %}
8837 %}
8839 instruct movP_nocopy(rRegI dst, eRegP src) %{
8840 effect( DEF dst, USE src );
8841 format %{ "MOV $dst,$src" %}
8842 ins_encode( enc_Copy( dst, src) );
8843 ins_pipe( ialu_reg_reg );
8844 %}
8846 instruct cp2b( rRegI dst, eRegP src, eFlagsReg cr ) %{
8847 effect( USE_DEF dst, USE src, KILL cr );
8848 format %{ "NEG $dst\n\t"
8849 "ADC $dst,$src" %}
8850 ins_encode( neg_reg(dst),
8851 OpcRegReg(0x13,dst,src) );
8852 ins_pipe( ialu_reg_reg_long );
8853 %}
8855 instruct convP2B( rRegI dst, eRegP src, eFlagsReg cr ) %{
8856 match(Set dst (Conv2B src));
8858 expand %{
8859 movP_nocopy(dst,src);
8860 cp2b(dst,src,cr);
8861 %}
8862 %}
8864 instruct cmpLTMask(eCXRegI dst, ncxRegI p, ncxRegI q, eFlagsReg cr) %{
8865 match(Set dst (CmpLTMask p q));
8866 effect(KILL cr);
8867 ins_cost(400);
8869 // SETlt can only use low byte of EAX,EBX, ECX, or EDX as destination
8870 format %{ "XOR $dst,$dst\n\t"
8871 "CMP $p,$q\n\t"
8872 "SETlt $dst\n\t"
8873 "NEG $dst" %}
8874 ins_encode %{
8875 Register Rp = $p$$Register;
8876 Register Rq = $q$$Register;
8877 Register Rd = $dst$$Register;
8878 Label done;
8879 __ xorl(Rd, Rd);
8880 __ cmpl(Rp, Rq);
8881 __ setb(Assembler::less, Rd);
8882 __ negl(Rd);
8883 %}
8885 ins_pipe(pipe_slow);
8886 %}
8888 instruct cmpLTMask0(rRegI dst, immI0 zero, eFlagsReg cr) %{
8889 match(Set dst (CmpLTMask dst zero));
8890 effect(DEF dst, KILL cr);
8891 ins_cost(100);
8893 format %{ "SAR $dst,31\t# cmpLTMask0" %}
8894 ins_encode %{
8895 __ sarl($dst$$Register, 31);
8896 %}
8897 ins_pipe(ialu_reg);
8898 %}
8900 /* better to save a register than avoid a branch */
8901 instruct cadd_cmpLTMask(rRegI p, rRegI q, rRegI y, eFlagsReg cr) %{
8902 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q)));
8903 effect(KILL cr);
8904 ins_cost(400);
8905 format %{ "SUB $p,$q\t# cadd_cmpLTMask\n\t"
8906 "JGE done\n\t"
8907 "ADD $p,$y\n"
8908 "done: " %}
8909 ins_encode %{
8910 Register Rp = $p$$Register;
8911 Register Rq = $q$$Register;
8912 Register Ry = $y$$Register;
8913 Label done;
8914 __ subl(Rp, Rq);
8915 __ jccb(Assembler::greaterEqual, done);
8916 __ addl(Rp, Ry);
8917 __ bind(done);
8918 %}
8920 ins_pipe(pipe_cmplt);
8921 %}
8923 /* better to save a register than avoid a branch */
8924 instruct and_cmpLTMask(rRegI p, rRegI q, rRegI y, eFlagsReg cr) %{
8925 match(Set y (AndI (CmpLTMask p q) y));
8926 effect(KILL cr);
8928 ins_cost(300);
8930 format %{ "CMPL $p, $q\t# and_cmpLTMask\n\t"
8931 "JLT done\n\t"
8932 "XORL $y, $y\n"
8933 "done: " %}
8934 ins_encode %{
8935 Register Rp = $p$$Register;
8936 Register Rq = $q$$Register;
8937 Register Ry = $y$$Register;
8938 Label done;
8939 __ cmpl(Rp, Rq);
8940 __ jccb(Assembler::less, done);
8941 __ xorl(Ry, Ry);
8942 __ bind(done);
8943 %}
8945 ins_pipe(pipe_cmplt);
8946 %}
8948 /* If I enable this, I encourage spilling in the inner loop of compress.
8949 instruct cadd_cmpLTMask_mem(ncxRegI p, ncxRegI q, memory y, eCXRegI tmp, eFlagsReg cr) %{
8950 match(Set p (AddI (AndI (CmpLTMask p q) (LoadI y)) (SubI p q)));
8951 */
8953 //----------Long Instructions------------------------------------------------
8954 // Add Long Register with Register
8955 instruct addL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
8956 match(Set dst (AddL dst src));
8957 effect(KILL cr);
8958 ins_cost(200);
8959 format %{ "ADD $dst.lo,$src.lo\n\t"
8960 "ADC $dst.hi,$src.hi" %}
8961 opcode(0x03, 0x13);
8962 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
8963 ins_pipe( ialu_reg_reg_long );
8964 %}
8966 // Add Long Register with Immediate
8967 instruct addL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
8968 match(Set dst (AddL dst src));
8969 effect(KILL cr);
8970 format %{ "ADD $dst.lo,$src.lo\n\t"
8971 "ADC $dst.hi,$src.hi" %}
8972 opcode(0x81,0x00,0x02); /* Opcode 81 /0, 81 /2 */
8973 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
8974 ins_pipe( ialu_reg_long );
8975 %}
8977 // Add Long Register with Memory
8978 instruct addL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
8979 match(Set dst (AddL dst (LoadL mem)));
8980 effect(KILL cr);
8981 ins_cost(125);
8982 format %{ "ADD $dst.lo,$mem\n\t"
8983 "ADC $dst.hi,$mem+4" %}
8984 opcode(0x03, 0x13);
8985 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
8986 ins_pipe( ialu_reg_long_mem );
8987 %}
8989 // Subtract Long Register with Register.
8990 instruct subL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
8991 match(Set dst (SubL dst src));
8992 effect(KILL cr);
8993 ins_cost(200);
8994 format %{ "SUB $dst.lo,$src.lo\n\t"
8995 "SBB $dst.hi,$src.hi" %}
8996 opcode(0x2B, 0x1B);
8997 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
8998 ins_pipe( ialu_reg_reg_long );
8999 %}
9001 // Subtract Long Register with Immediate
9002 instruct subL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9003 match(Set dst (SubL dst src));
9004 effect(KILL cr);
9005 format %{ "SUB $dst.lo,$src.lo\n\t"
9006 "SBB $dst.hi,$src.hi" %}
9007 opcode(0x81,0x05,0x03); /* Opcode 81 /5, 81 /3 */
9008 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9009 ins_pipe( ialu_reg_long );
9010 %}
9012 // Subtract Long Register with Memory
9013 instruct subL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9014 match(Set dst (SubL dst (LoadL mem)));
9015 effect(KILL cr);
9016 ins_cost(125);
9017 format %{ "SUB $dst.lo,$mem\n\t"
9018 "SBB $dst.hi,$mem+4" %}
9019 opcode(0x2B, 0x1B);
9020 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9021 ins_pipe( ialu_reg_long_mem );
9022 %}
9024 instruct negL_eReg(eRegL dst, immL0 zero, eFlagsReg cr) %{
9025 match(Set dst (SubL zero dst));
9026 effect(KILL cr);
9027 ins_cost(300);
9028 format %{ "NEG $dst.hi\n\tNEG $dst.lo\n\tSBB $dst.hi,0" %}
9029 ins_encode( neg_long(dst) );
9030 ins_pipe( ialu_reg_reg_long );
9031 %}
9033 // And Long Register with Register
9034 instruct andL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9035 match(Set dst (AndL dst src));
9036 effect(KILL cr);
9037 format %{ "AND $dst.lo,$src.lo\n\t"
9038 "AND $dst.hi,$src.hi" %}
9039 opcode(0x23,0x23);
9040 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9041 ins_pipe( ialu_reg_reg_long );
9042 %}
9044 // And Long Register with Immediate
9045 instruct andL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9046 match(Set dst (AndL dst src));
9047 effect(KILL cr);
9048 format %{ "AND $dst.lo,$src.lo\n\t"
9049 "AND $dst.hi,$src.hi" %}
9050 opcode(0x81,0x04,0x04); /* Opcode 81 /4, 81 /4 */
9051 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9052 ins_pipe( ialu_reg_long );
9053 %}
9055 // And Long Register with Memory
9056 instruct andL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9057 match(Set dst (AndL dst (LoadL mem)));
9058 effect(KILL cr);
9059 ins_cost(125);
9060 format %{ "AND $dst.lo,$mem\n\t"
9061 "AND $dst.hi,$mem+4" %}
9062 opcode(0x23, 0x23);
9063 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9064 ins_pipe( ialu_reg_long_mem );
9065 %}
9067 // Or Long Register with Register
9068 instruct orl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9069 match(Set dst (OrL dst src));
9070 effect(KILL cr);
9071 format %{ "OR $dst.lo,$src.lo\n\t"
9072 "OR $dst.hi,$src.hi" %}
9073 opcode(0x0B,0x0B);
9074 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9075 ins_pipe( ialu_reg_reg_long );
9076 %}
9078 // Or Long Register with Immediate
9079 instruct orl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9080 match(Set dst (OrL dst src));
9081 effect(KILL cr);
9082 format %{ "OR $dst.lo,$src.lo\n\t"
9083 "OR $dst.hi,$src.hi" %}
9084 opcode(0x81,0x01,0x01); /* Opcode 81 /1, 81 /1 */
9085 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9086 ins_pipe( ialu_reg_long );
9087 %}
9089 // Or Long Register with Memory
9090 instruct orl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9091 match(Set dst (OrL dst (LoadL mem)));
9092 effect(KILL cr);
9093 ins_cost(125);
9094 format %{ "OR $dst.lo,$mem\n\t"
9095 "OR $dst.hi,$mem+4" %}
9096 opcode(0x0B,0x0B);
9097 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9098 ins_pipe( ialu_reg_long_mem );
9099 %}
9101 // Xor Long Register with Register
9102 instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9103 match(Set dst (XorL dst src));
9104 effect(KILL cr);
9105 format %{ "XOR $dst.lo,$src.lo\n\t"
9106 "XOR $dst.hi,$src.hi" %}
9107 opcode(0x33,0x33);
9108 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9109 ins_pipe( ialu_reg_reg_long );
9110 %}
9112 // Xor Long Register with Immediate -1
9113 instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
9114 match(Set dst (XorL dst imm));
9115 format %{ "NOT $dst.lo\n\t"
9116 "NOT $dst.hi" %}
9117 ins_encode %{
9118 __ notl($dst$$Register);
9119 __ notl(HIGH_FROM_LOW($dst$$Register));
9120 %}
9121 ins_pipe( ialu_reg_long );
9122 %}
9124 // Xor Long Register with Immediate
9125 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9126 match(Set dst (XorL dst src));
9127 effect(KILL cr);
9128 format %{ "XOR $dst.lo,$src.lo\n\t"
9129 "XOR $dst.hi,$src.hi" %}
9130 opcode(0x81,0x06,0x06); /* Opcode 81 /6, 81 /6 */
9131 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9132 ins_pipe( ialu_reg_long );
9133 %}
9135 // Xor Long Register with Memory
9136 instruct xorl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9137 match(Set dst (XorL dst (LoadL mem)));
9138 effect(KILL cr);
9139 ins_cost(125);
9140 format %{ "XOR $dst.lo,$mem\n\t"
9141 "XOR $dst.hi,$mem+4" %}
9142 opcode(0x33,0x33);
9143 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9144 ins_pipe( ialu_reg_long_mem );
9145 %}
9147 // Shift Left Long by 1
9148 instruct shlL_eReg_1(eRegL dst, immI_1 cnt, eFlagsReg cr) %{
9149 predicate(UseNewLongLShift);
9150 match(Set dst (LShiftL dst cnt));
9151 effect(KILL cr);
9152 ins_cost(100);
9153 format %{ "ADD $dst.lo,$dst.lo\n\t"
9154 "ADC $dst.hi,$dst.hi" %}
9155 ins_encode %{
9156 __ addl($dst$$Register,$dst$$Register);
9157 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9158 %}
9159 ins_pipe( ialu_reg_long );
9160 %}
9162 // Shift Left Long by 2
9163 instruct shlL_eReg_2(eRegL dst, immI_2 cnt, eFlagsReg cr) %{
9164 predicate(UseNewLongLShift);
9165 match(Set dst (LShiftL dst cnt));
9166 effect(KILL cr);
9167 ins_cost(100);
9168 format %{ "ADD $dst.lo,$dst.lo\n\t"
9169 "ADC $dst.hi,$dst.hi\n\t"
9170 "ADD $dst.lo,$dst.lo\n\t"
9171 "ADC $dst.hi,$dst.hi" %}
9172 ins_encode %{
9173 __ addl($dst$$Register,$dst$$Register);
9174 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9175 __ addl($dst$$Register,$dst$$Register);
9176 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9177 %}
9178 ins_pipe( ialu_reg_long );
9179 %}
9181 // Shift Left Long by 3
9182 instruct shlL_eReg_3(eRegL dst, immI_3 cnt, eFlagsReg cr) %{
9183 predicate(UseNewLongLShift);
9184 match(Set dst (LShiftL dst cnt));
9185 effect(KILL cr);
9186 ins_cost(100);
9187 format %{ "ADD $dst.lo,$dst.lo\n\t"
9188 "ADC $dst.hi,$dst.hi\n\t"
9189 "ADD $dst.lo,$dst.lo\n\t"
9190 "ADC $dst.hi,$dst.hi\n\t"
9191 "ADD $dst.lo,$dst.lo\n\t"
9192 "ADC $dst.hi,$dst.hi" %}
9193 ins_encode %{
9194 __ addl($dst$$Register,$dst$$Register);
9195 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9196 __ addl($dst$$Register,$dst$$Register);
9197 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9198 __ addl($dst$$Register,$dst$$Register);
9199 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9200 %}
9201 ins_pipe( ialu_reg_long );
9202 %}
9204 // Shift Left Long by 1-31
9205 instruct shlL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9206 match(Set dst (LShiftL dst cnt));
9207 effect(KILL cr);
9208 ins_cost(200);
9209 format %{ "SHLD $dst.hi,$dst.lo,$cnt\n\t"
9210 "SHL $dst.lo,$cnt" %}
9211 opcode(0xC1, 0x4, 0xA4); /* 0F/A4, then C1 /4 ib */
9212 ins_encode( move_long_small_shift(dst,cnt) );
9213 ins_pipe( ialu_reg_long );
9214 %}
9216 // Shift Left Long by 32-63
9217 instruct shlL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9218 match(Set dst (LShiftL dst cnt));
9219 effect(KILL cr);
9220 ins_cost(300);
9221 format %{ "MOV $dst.hi,$dst.lo\n"
9222 "\tSHL $dst.hi,$cnt-32\n"
9223 "\tXOR $dst.lo,$dst.lo" %}
9224 opcode(0xC1, 0x4); /* C1 /4 ib */
9225 ins_encode( move_long_big_shift_clr(dst,cnt) );
9226 ins_pipe( ialu_reg_long );
9227 %}
9229 // Shift Left Long by variable
9230 instruct salL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9231 match(Set dst (LShiftL dst shift));
9232 effect(KILL cr);
9233 ins_cost(500+200);
9234 size(17);
9235 format %{ "TEST $shift,32\n\t"
9236 "JEQ,s small\n\t"
9237 "MOV $dst.hi,$dst.lo\n\t"
9238 "XOR $dst.lo,$dst.lo\n"
9239 "small:\tSHLD $dst.hi,$dst.lo,$shift\n\t"
9240 "SHL $dst.lo,$shift" %}
9241 ins_encode( shift_left_long( dst, shift ) );
9242 ins_pipe( pipe_slow );
9243 %}
9245 // Shift Right Long by 1-31
9246 instruct shrL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9247 match(Set dst (URShiftL dst cnt));
9248 effect(KILL cr);
9249 ins_cost(200);
9250 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9251 "SHR $dst.hi,$cnt" %}
9252 opcode(0xC1, 0x5, 0xAC); /* 0F/AC, then C1 /5 ib */
9253 ins_encode( move_long_small_shift(dst,cnt) );
9254 ins_pipe( ialu_reg_long );
9255 %}
9257 // Shift Right Long by 32-63
9258 instruct shrL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9259 match(Set dst (URShiftL dst cnt));
9260 effect(KILL cr);
9261 ins_cost(300);
9262 format %{ "MOV $dst.lo,$dst.hi\n"
9263 "\tSHR $dst.lo,$cnt-32\n"
9264 "\tXOR $dst.hi,$dst.hi" %}
9265 opcode(0xC1, 0x5); /* C1 /5 ib */
9266 ins_encode( move_long_big_shift_clr(dst,cnt) );
9267 ins_pipe( ialu_reg_long );
9268 %}
9270 // Shift Right Long by variable
9271 instruct shrL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9272 match(Set dst (URShiftL dst shift));
9273 effect(KILL cr);
9274 ins_cost(600);
9275 size(17);
9276 format %{ "TEST $shift,32\n\t"
9277 "JEQ,s small\n\t"
9278 "MOV $dst.lo,$dst.hi\n\t"
9279 "XOR $dst.hi,$dst.hi\n"
9280 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9281 "SHR $dst.hi,$shift" %}
9282 ins_encode( shift_right_long( dst, shift ) );
9283 ins_pipe( pipe_slow );
9284 %}
9286 // Shift Right Long by 1-31
9287 instruct sarL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9288 match(Set dst (RShiftL dst cnt));
9289 effect(KILL cr);
9290 ins_cost(200);
9291 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9292 "SAR $dst.hi,$cnt" %}
9293 opcode(0xC1, 0x7, 0xAC); /* 0F/AC, then C1 /7 ib */
9294 ins_encode( move_long_small_shift(dst,cnt) );
9295 ins_pipe( ialu_reg_long );
9296 %}
9298 // Shift Right Long by 32-63
9299 instruct sarL_eReg_32_63( eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9300 match(Set dst (RShiftL dst cnt));
9301 effect(KILL cr);
9302 ins_cost(300);
9303 format %{ "MOV $dst.lo,$dst.hi\n"
9304 "\tSAR $dst.lo,$cnt-32\n"
9305 "\tSAR $dst.hi,31" %}
9306 opcode(0xC1, 0x7); /* C1 /7 ib */
9307 ins_encode( move_long_big_shift_sign(dst,cnt) );
9308 ins_pipe( ialu_reg_long );
9309 %}
9311 // Shift Right arithmetic Long by variable
9312 instruct sarL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9313 match(Set dst (RShiftL dst shift));
9314 effect(KILL cr);
9315 ins_cost(600);
9316 size(18);
9317 format %{ "TEST $shift,32\n\t"
9318 "JEQ,s small\n\t"
9319 "MOV $dst.lo,$dst.hi\n\t"
9320 "SAR $dst.hi,31\n"
9321 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9322 "SAR $dst.hi,$shift" %}
9323 ins_encode( shift_right_arith_long( dst, shift ) );
9324 ins_pipe( pipe_slow );
9325 %}
9328 //----------Double Instructions------------------------------------------------
9329 // Double Math
9331 // Compare & branch
9333 // P6 version of float compare, sets condition codes in EFLAGS
9334 instruct cmpDPR_cc_P6(eFlagsRegU cr, regDPR src1, regDPR src2, eAXRegI rax) %{
9335 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9336 match(Set cr (CmpD src1 src2));
9337 effect(KILL rax);
9338 ins_cost(150);
9339 format %{ "FLD $src1\n\t"
9340 "FUCOMIP ST,$src2 // P6 instruction\n\t"
9341 "JNP exit\n\t"
9342 "MOV ah,1 // saw a NaN, set CF\n\t"
9343 "SAHF\n"
9344 "exit:\tNOP // avoid branch to branch" %}
9345 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9346 ins_encode( Push_Reg_DPR(src1),
9347 OpcP, RegOpc(src2),
9348 cmpF_P6_fixup );
9349 ins_pipe( pipe_slow );
9350 %}
9352 instruct cmpDPR_cc_P6CF(eFlagsRegUCF cr, regDPR src1, regDPR src2) %{
9353 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9354 match(Set cr (CmpD src1 src2));
9355 ins_cost(150);
9356 format %{ "FLD $src1\n\t"
9357 "FUCOMIP ST,$src2 // P6 instruction" %}
9358 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9359 ins_encode( Push_Reg_DPR(src1),
9360 OpcP, RegOpc(src2));
9361 ins_pipe( pipe_slow );
9362 %}
9364 // Compare & branch
9365 instruct cmpDPR_cc(eFlagsRegU cr, regDPR src1, regDPR src2, eAXRegI rax) %{
9366 predicate(UseSSE<=1);
9367 match(Set cr (CmpD src1 src2));
9368 effect(KILL rax);
9369 ins_cost(200);
9370 format %{ "FLD $src1\n\t"
9371 "FCOMp $src2\n\t"
9372 "FNSTSW AX\n\t"
9373 "TEST AX,0x400\n\t"
9374 "JZ,s flags\n\t"
9375 "MOV AH,1\t# unordered treat as LT\n"
9376 "flags:\tSAHF" %}
9377 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9378 ins_encode( Push_Reg_DPR(src1),
9379 OpcP, RegOpc(src2),
9380 fpu_flags);
9381 ins_pipe( pipe_slow );
9382 %}
9384 // Compare vs zero into -1,0,1
9385 instruct cmpDPR_0(rRegI dst, regDPR src1, immDPR0 zero, eAXRegI rax, eFlagsReg cr) %{
9386 predicate(UseSSE<=1);
9387 match(Set dst (CmpD3 src1 zero));
9388 effect(KILL cr, KILL rax);
9389 ins_cost(280);
9390 format %{ "FTSTD $dst,$src1" %}
9391 opcode(0xE4, 0xD9);
9392 ins_encode( Push_Reg_DPR(src1),
9393 OpcS, OpcP, PopFPU,
9394 CmpF_Result(dst));
9395 ins_pipe( pipe_slow );
9396 %}
9398 // Compare into -1,0,1
9399 instruct cmpDPR_reg(rRegI dst, regDPR src1, regDPR src2, eAXRegI rax, eFlagsReg cr) %{
9400 predicate(UseSSE<=1);
9401 match(Set dst (CmpD3 src1 src2));
9402 effect(KILL cr, KILL rax);
9403 ins_cost(300);
9404 format %{ "FCMPD $dst,$src1,$src2" %}
9405 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9406 ins_encode( Push_Reg_DPR(src1),
9407 OpcP, RegOpc(src2),
9408 CmpF_Result(dst));
9409 ins_pipe( pipe_slow );
9410 %}
9412 // float compare and set condition codes in EFLAGS by XMM regs
9413 instruct cmpD_cc(eFlagsRegU cr, regD src1, regD src2) %{
9414 predicate(UseSSE>=2);
9415 match(Set cr (CmpD src1 src2));
9416 ins_cost(145);
9417 format %{ "UCOMISD $src1,$src2\n\t"
9418 "JNP,s exit\n\t"
9419 "PUSHF\t# saw NaN, set CF\n\t"
9420 "AND [rsp], #0xffffff2b\n\t"
9421 "POPF\n"
9422 "exit:" %}
9423 ins_encode %{
9424 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9425 emit_cmpfp_fixup(_masm);
9426 %}
9427 ins_pipe( pipe_slow );
9428 %}
9430 instruct cmpD_ccCF(eFlagsRegUCF cr, regD src1, regD src2) %{
9431 predicate(UseSSE>=2);
9432 match(Set cr (CmpD src1 src2));
9433 ins_cost(100);
9434 format %{ "UCOMISD $src1,$src2" %}
9435 ins_encode %{
9436 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9437 %}
9438 ins_pipe( pipe_slow );
9439 %}
9441 // float compare and set condition codes in EFLAGS by XMM regs
9442 instruct cmpD_ccmem(eFlagsRegU cr, regD src1, memory src2) %{
9443 predicate(UseSSE>=2);
9444 match(Set cr (CmpD src1 (LoadD src2)));
9445 ins_cost(145);
9446 format %{ "UCOMISD $src1,$src2\n\t"
9447 "JNP,s exit\n\t"
9448 "PUSHF\t# saw NaN, set CF\n\t"
9449 "AND [rsp], #0xffffff2b\n\t"
9450 "POPF\n"
9451 "exit:" %}
9452 ins_encode %{
9453 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9454 emit_cmpfp_fixup(_masm);
9455 %}
9456 ins_pipe( pipe_slow );
9457 %}
9459 instruct cmpD_ccmemCF(eFlagsRegUCF cr, regD src1, memory src2) %{
9460 predicate(UseSSE>=2);
9461 match(Set cr (CmpD src1 (LoadD src2)));
9462 ins_cost(100);
9463 format %{ "UCOMISD $src1,$src2" %}
9464 ins_encode %{
9465 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9466 %}
9467 ins_pipe( pipe_slow );
9468 %}
9470 // Compare into -1,0,1 in XMM
9471 instruct cmpD_reg(xRegI dst, regD src1, regD src2, eFlagsReg cr) %{
9472 predicate(UseSSE>=2);
9473 match(Set dst (CmpD3 src1 src2));
9474 effect(KILL cr);
9475 ins_cost(255);
9476 format %{ "UCOMISD $src1, $src2\n\t"
9477 "MOV $dst, #-1\n\t"
9478 "JP,s done\n\t"
9479 "JB,s done\n\t"
9480 "SETNE $dst\n\t"
9481 "MOVZB $dst, $dst\n"
9482 "done:" %}
9483 ins_encode %{
9484 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9485 emit_cmpfp3(_masm, $dst$$Register);
9486 %}
9487 ins_pipe( pipe_slow );
9488 %}
9490 // Compare into -1,0,1 in XMM and memory
9491 instruct cmpD_regmem(xRegI dst, regD src1, memory src2, eFlagsReg cr) %{
9492 predicate(UseSSE>=2);
9493 match(Set dst (CmpD3 src1 (LoadD src2)));
9494 effect(KILL cr);
9495 ins_cost(275);
9496 format %{ "UCOMISD $src1, $src2\n\t"
9497 "MOV $dst, #-1\n\t"
9498 "JP,s done\n\t"
9499 "JB,s done\n\t"
9500 "SETNE $dst\n\t"
9501 "MOVZB $dst, $dst\n"
9502 "done:" %}
9503 ins_encode %{
9504 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9505 emit_cmpfp3(_masm, $dst$$Register);
9506 %}
9507 ins_pipe( pipe_slow );
9508 %}
9511 instruct subDPR_reg(regDPR dst, regDPR src) %{
9512 predicate (UseSSE <=1);
9513 match(Set dst (SubD dst src));
9515 format %{ "FLD $src\n\t"
9516 "DSUBp $dst,ST" %}
9517 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
9518 ins_cost(150);
9519 ins_encode( Push_Reg_DPR(src),
9520 OpcP, RegOpc(dst) );
9521 ins_pipe( fpu_reg_reg );
9522 %}
9524 instruct subDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9525 predicate (UseSSE <=1);
9526 match(Set dst (RoundDouble (SubD src1 src2)));
9527 ins_cost(250);
9529 format %{ "FLD $src2\n\t"
9530 "DSUB ST,$src1\n\t"
9531 "FSTP_D $dst\t# D-round" %}
9532 opcode(0xD8, 0x5);
9533 ins_encode( Push_Reg_DPR(src2),
9534 OpcP, RegOpc(src1), Pop_Mem_DPR(dst) );
9535 ins_pipe( fpu_mem_reg_reg );
9536 %}
9539 instruct subDPR_reg_mem(regDPR dst, memory src) %{
9540 predicate (UseSSE <=1);
9541 match(Set dst (SubD dst (LoadD src)));
9542 ins_cost(150);
9544 format %{ "FLD $src\n\t"
9545 "DSUBp $dst,ST" %}
9546 opcode(0xDE, 0x5, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
9547 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9548 OpcP, RegOpc(dst) );
9549 ins_pipe( fpu_reg_mem );
9550 %}
9552 instruct absDPR_reg(regDPR1 dst, regDPR1 src) %{
9553 predicate (UseSSE<=1);
9554 match(Set dst (AbsD src));
9555 ins_cost(100);
9556 format %{ "FABS" %}
9557 opcode(0xE1, 0xD9);
9558 ins_encode( OpcS, OpcP );
9559 ins_pipe( fpu_reg_reg );
9560 %}
9562 instruct negDPR_reg(regDPR1 dst, regDPR1 src) %{
9563 predicate(UseSSE<=1);
9564 match(Set dst (NegD src));
9565 ins_cost(100);
9566 format %{ "FCHS" %}
9567 opcode(0xE0, 0xD9);
9568 ins_encode( OpcS, OpcP );
9569 ins_pipe( fpu_reg_reg );
9570 %}
9572 instruct addDPR_reg(regDPR dst, regDPR src) %{
9573 predicate(UseSSE<=1);
9574 match(Set dst (AddD dst src));
9575 format %{ "FLD $src\n\t"
9576 "DADD $dst,ST" %}
9577 size(4);
9578 ins_cost(150);
9579 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
9580 ins_encode( Push_Reg_DPR(src),
9581 OpcP, RegOpc(dst) );
9582 ins_pipe( fpu_reg_reg );
9583 %}
9586 instruct addDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9587 predicate(UseSSE<=1);
9588 match(Set dst (RoundDouble (AddD src1 src2)));
9589 ins_cost(250);
9591 format %{ "FLD $src2\n\t"
9592 "DADD ST,$src1\n\t"
9593 "FSTP_D $dst\t# D-round" %}
9594 opcode(0xD8, 0x0); /* D8 C0+i or D8 /0*/
9595 ins_encode( Push_Reg_DPR(src2),
9596 OpcP, RegOpc(src1), Pop_Mem_DPR(dst) );
9597 ins_pipe( fpu_mem_reg_reg );
9598 %}
9601 instruct addDPR_reg_mem(regDPR dst, memory src) %{
9602 predicate(UseSSE<=1);
9603 match(Set dst (AddD dst (LoadD src)));
9604 ins_cost(150);
9606 format %{ "FLD $src\n\t"
9607 "DADDp $dst,ST" %}
9608 opcode(0xDE, 0x0, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
9609 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9610 OpcP, RegOpc(dst) );
9611 ins_pipe( fpu_reg_mem );
9612 %}
9614 // add-to-memory
9615 instruct addDPR_mem_reg(memory dst, regDPR src) %{
9616 predicate(UseSSE<=1);
9617 match(Set dst (StoreD dst (RoundDouble (AddD (LoadD dst) src))));
9618 ins_cost(150);
9620 format %{ "FLD_D $dst\n\t"
9621 "DADD ST,$src\n\t"
9622 "FST_D $dst" %}
9623 opcode(0xDD, 0x0);
9624 ins_encode( Opcode(0xDD), RMopc_Mem(0x00,dst),
9625 Opcode(0xD8), RegOpc(src),
9626 set_instruction_start,
9627 Opcode(0xDD), RMopc_Mem(0x03,dst) );
9628 ins_pipe( fpu_reg_mem );
9629 %}
9631 instruct addDPR_reg_imm1(regDPR dst, immDPR1 con) %{
9632 predicate(UseSSE<=1);
9633 match(Set dst (AddD dst con));
9634 ins_cost(125);
9635 format %{ "FLD1\n\t"
9636 "DADDp $dst,ST" %}
9637 ins_encode %{
9638 __ fld1();
9639 __ faddp($dst$$reg);
9640 %}
9641 ins_pipe(fpu_reg);
9642 %}
9644 instruct addDPR_reg_imm(regDPR dst, immDPR con) %{
9645 predicate(UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
9646 match(Set dst (AddD dst con));
9647 ins_cost(200);
9648 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9649 "DADDp $dst,ST" %}
9650 ins_encode %{
9651 __ fld_d($constantaddress($con));
9652 __ faddp($dst$$reg);
9653 %}
9654 ins_pipe(fpu_reg_mem);
9655 %}
9657 instruct addDPR_reg_imm_round(stackSlotD dst, regDPR src, immDPR con) %{
9658 predicate(UseSSE<=1 && _kids[0]->_kids[1]->_leaf->getd() != 0.0 && _kids[0]->_kids[1]->_leaf->getd() != 1.0 );
9659 match(Set dst (RoundDouble (AddD src con)));
9660 ins_cost(200);
9661 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9662 "DADD ST,$src\n\t"
9663 "FSTP_D $dst\t# D-round" %}
9664 ins_encode %{
9665 __ fld_d($constantaddress($con));
9666 __ fadd($src$$reg);
9667 __ fstp_d(Address(rsp, $dst$$disp));
9668 %}
9669 ins_pipe(fpu_mem_reg_con);
9670 %}
9672 instruct mulDPR_reg(regDPR dst, regDPR src) %{
9673 predicate(UseSSE<=1);
9674 match(Set dst (MulD dst src));
9675 format %{ "FLD $src\n\t"
9676 "DMULp $dst,ST" %}
9677 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
9678 ins_cost(150);
9679 ins_encode( Push_Reg_DPR(src),
9680 OpcP, RegOpc(dst) );
9681 ins_pipe( fpu_reg_reg );
9682 %}
9684 // Strict FP instruction biases argument before multiply then
9685 // biases result to avoid double rounding of subnormals.
9686 //
9687 // scale arg1 by multiplying arg1 by 2^(-15360)
9688 // load arg2
9689 // multiply scaled arg1 by arg2
9690 // rescale product by 2^(15360)
9691 //
9692 instruct strictfp_mulDPR_reg(regDPR1 dst, regnotDPR1 src) %{
9693 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
9694 match(Set dst (MulD dst src));
9695 ins_cost(1); // Select this instruction for all strict FP double multiplies
9697 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
9698 "DMULp $dst,ST\n\t"
9699 "FLD $src\n\t"
9700 "DMULp $dst,ST\n\t"
9701 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
9702 "DMULp $dst,ST\n\t" %}
9703 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
9704 ins_encode( strictfp_bias1(dst),
9705 Push_Reg_DPR(src),
9706 OpcP, RegOpc(dst),
9707 strictfp_bias2(dst) );
9708 ins_pipe( fpu_reg_reg );
9709 %}
9711 instruct mulDPR_reg_imm(regDPR dst, immDPR con) %{
9712 predicate( UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
9713 match(Set dst (MulD dst con));
9714 ins_cost(200);
9715 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9716 "DMULp $dst,ST" %}
9717 ins_encode %{
9718 __ fld_d($constantaddress($con));
9719 __ fmulp($dst$$reg);
9720 %}
9721 ins_pipe(fpu_reg_mem);
9722 %}
9725 instruct mulDPR_reg_mem(regDPR dst, memory src) %{
9726 predicate( UseSSE<=1 );
9727 match(Set dst (MulD dst (LoadD src)));
9728 ins_cost(200);
9729 format %{ "FLD_D $src\n\t"
9730 "DMULp $dst,ST" %}
9731 opcode(0xDE, 0x1, 0xDD); /* DE C8+i or DE /1*/ /* LoadD DD /0 */
9732 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9733 OpcP, RegOpc(dst) );
9734 ins_pipe( fpu_reg_mem );
9735 %}
9737 //
9738 // Cisc-alternate to reg-reg multiply
9739 instruct mulDPR_reg_mem_cisc(regDPR dst, regDPR src, memory mem) %{
9740 predicate( UseSSE<=1 );
9741 match(Set dst (MulD src (LoadD mem)));
9742 ins_cost(250);
9743 format %{ "FLD_D $mem\n\t"
9744 "DMUL ST,$src\n\t"
9745 "FSTP_D $dst" %}
9746 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadD D9 /0 */
9747 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem),
9748 OpcReg_FPR(src),
9749 Pop_Reg_DPR(dst) );
9750 ins_pipe( fpu_reg_reg_mem );
9751 %}
9754 // MACRO3 -- addDPR a mulDPR
9755 // This instruction is a '2-address' instruction in that the result goes
9756 // back to src2. This eliminates a move from the macro; possibly the
9757 // register allocator will have to add it back (and maybe not).
9758 instruct addDPR_mulDPR_reg(regDPR src2, regDPR src1, regDPR src0) %{
9759 predicate( UseSSE<=1 );
9760 match(Set src2 (AddD (MulD src0 src1) src2));
9761 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
9762 "DMUL ST,$src1\n\t"
9763 "DADDp $src2,ST" %}
9764 ins_cost(250);
9765 opcode(0xDD); /* LoadD DD /0 */
9766 ins_encode( Push_Reg_FPR(src0),
9767 FMul_ST_reg(src1),
9768 FAddP_reg_ST(src2) );
9769 ins_pipe( fpu_reg_reg_reg );
9770 %}
9773 // MACRO3 -- subDPR a mulDPR
9774 instruct subDPR_mulDPR_reg(regDPR src2, regDPR src1, regDPR src0) %{
9775 predicate( UseSSE<=1 );
9776 match(Set src2 (SubD (MulD src0 src1) src2));
9777 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
9778 "DMUL ST,$src1\n\t"
9779 "DSUBRp $src2,ST" %}
9780 ins_cost(250);
9781 ins_encode( Push_Reg_FPR(src0),
9782 FMul_ST_reg(src1),
9783 Opcode(0xDE), Opc_plus(0xE0,src2));
9784 ins_pipe( fpu_reg_reg_reg );
9785 %}
9788 instruct divDPR_reg(regDPR dst, regDPR src) %{
9789 predicate( UseSSE<=1 );
9790 match(Set dst (DivD dst src));
9792 format %{ "FLD $src\n\t"
9793 "FDIVp $dst,ST" %}
9794 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
9795 ins_cost(150);
9796 ins_encode( Push_Reg_DPR(src),
9797 OpcP, RegOpc(dst) );
9798 ins_pipe( fpu_reg_reg );
9799 %}
9801 // Strict FP instruction biases argument before division then
9802 // biases result, to avoid double rounding of subnormals.
9803 //
9804 // scale dividend by multiplying dividend by 2^(-15360)
9805 // load divisor
9806 // divide scaled dividend by divisor
9807 // rescale quotient by 2^(15360)
9808 //
9809 instruct strictfp_divDPR_reg(regDPR1 dst, regnotDPR1 src) %{
9810 predicate (UseSSE<=1);
9811 match(Set dst (DivD dst src));
9812 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
9813 ins_cost(01);
9815 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
9816 "DMULp $dst,ST\n\t"
9817 "FLD $src\n\t"
9818 "FDIVp $dst,ST\n\t"
9819 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
9820 "DMULp $dst,ST\n\t" %}
9821 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
9822 ins_encode( strictfp_bias1(dst),
9823 Push_Reg_DPR(src),
9824 OpcP, RegOpc(dst),
9825 strictfp_bias2(dst) );
9826 ins_pipe( fpu_reg_reg );
9827 %}
9829 instruct divDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9830 predicate( UseSSE<=1 && !(Compile::current()->has_method() && Compile::current()->method()->is_strict()) );
9831 match(Set dst (RoundDouble (DivD src1 src2)));
9833 format %{ "FLD $src1\n\t"
9834 "FDIV ST,$src2\n\t"
9835 "FSTP_D $dst\t# D-round" %}
9836 opcode(0xD8, 0x6); /* D8 F0+i or D8 /6 */
9837 ins_encode( Push_Reg_DPR(src1),
9838 OpcP, RegOpc(src2), Pop_Mem_DPR(dst) );
9839 ins_pipe( fpu_mem_reg_reg );
9840 %}
9843 instruct modDPR_reg(regDPR dst, regDPR src, eAXRegI rax, eFlagsReg cr) %{
9844 predicate(UseSSE<=1);
9845 match(Set dst (ModD dst src));
9846 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
9848 format %{ "DMOD $dst,$src" %}
9849 ins_cost(250);
9850 ins_encode(Push_Reg_Mod_DPR(dst, src),
9851 emitModDPR(),
9852 Push_Result_Mod_DPR(src),
9853 Pop_Reg_DPR(dst));
9854 ins_pipe( pipe_slow );
9855 %}
9857 instruct modD_reg(regD dst, regD src0, regD src1, eAXRegI rax, eFlagsReg cr) %{
9858 predicate(UseSSE>=2);
9859 match(Set dst (ModD src0 src1));
9860 effect(KILL rax, KILL cr);
9862 format %{ "SUB ESP,8\t # DMOD\n"
9863 "\tMOVSD [ESP+0],$src1\n"
9864 "\tFLD_D [ESP+0]\n"
9865 "\tMOVSD [ESP+0],$src0\n"
9866 "\tFLD_D [ESP+0]\n"
9867 "loop:\tFPREM\n"
9868 "\tFWAIT\n"
9869 "\tFNSTSW AX\n"
9870 "\tSAHF\n"
9871 "\tJP loop\n"
9872 "\tFSTP_D [ESP+0]\n"
9873 "\tMOVSD $dst,[ESP+0]\n"
9874 "\tADD ESP,8\n"
9875 "\tFSTP ST0\t # Restore FPU Stack"
9876 %}
9877 ins_cost(250);
9878 ins_encode( Push_ModD_encoding(src0, src1), emitModDPR(), Push_ResultD(dst), PopFPU);
9879 ins_pipe( pipe_slow );
9880 %}
9882 instruct sinDPR_reg(regDPR1 dst, regDPR1 src) %{
9883 predicate (UseSSE<=1);
9884 match(Set dst (SinD src));
9885 ins_cost(1800);
9886 format %{ "DSIN $dst" %}
9887 opcode(0xD9, 0xFE);
9888 ins_encode( OpcP, OpcS );
9889 ins_pipe( pipe_slow );
9890 %}
9892 instruct sinD_reg(regD dst, eFlagsReg cr) %{
9893 predicate (UseSSE>=2);
9894 match(Set dst (SinD dst));
9895 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9896 ins_cost(1800);
9897 format %{ "DSIN $dst" %}
9898 opcode(0xD9, 0xFE);
9899 ins_encode( Push_SrcD(dst), OpcP, OpcS, Push_ResultD(dst) );
9900 ins_pipe( pipe_slow );
9901 %}
9903 instruct cosDPR_reg(regDPR1 dst, regDPR1 src) %{
9904 predicate (UseSSE<=1);
9905 match(Set dst (CosD src));
9906 ins_cost(1800);
9907 format %{ "DCOS $dst" %}
9908 opcode(0xD9, 0xFF);
9909 ins_encode( OpcP, OpcS );
9910 ins_pipe( pipe_slow );
9911 %}
9913 instruct cosD_reg(regD dst, eFlagsReg cr) %{
9914 predicate (UseSSE>=2);
9915 match(Set dst (CosD dst));
9916 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9917 ins_cost(1800);
9918 format %{ "DCOS $dst" %}
9919 opcode(0xD9, 0xFF);
9920 ins_encode( Push_SrcD(dst), OpcP, OpcS, Push_ResultD(dst) );
9921 ins_pipe( pipe_slow );
9922 %}
9924 instruct tanDPR_reg(regDPR1 dst, regDPR1 src) %{
9925 predicate (UseSSE<=1);
9926 match(Set dst(TanD src));
9927 format %{ "DTAN $dst" %}
9928 ins_encode( Opcode(0xD9), Opcode(0xF2), // fptan
9929 Opcode(0xDD), Opcode(0xD8)); // fstp st
9930 ins_pipe( pipe_slow );
9931 %}
9933 instruct tanD_reg(regD dst, eFlagsReg cr) %{
9934 predicate (UseSSE>=2);
9935 match(Set dst(TanD dst));
9936 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9937 format %{ "DTAN $dst" %}
9938 ins_encode( Push_SrcD(dst),
9939 Opcode(0xD9), Opcode(0xF2), // fptan
9940 Opcode(0xDD), Opcode(0xD8), // fstp st
9941 Push_ResultD(dst) );
9942 ins_pipe( pipe_slow );
9943 %}
9945 instruct atanDPR_reg(regDPR dst, regDPR src) %{
9946 predicate (UseSSE<=1);
9947 match(Set dst(AtanD dst src));
9948 format %{ "DATA $dst,$src" %}
9949 opcode(0xD9, 0xF3);
9950 ins_encode( Push_Reg_DPR(src),
9951 OpcP, OpcS, RegOpc(dst) );
9952 ins_pipe( pipe_slow );
9953 %}
9955 instruct atanD_reg(regD dst, regD src, eFlagsReg cr) %{
9956 predicate (UseSSE>=2);
9957 match(Set dst(AtanD dst src));
9958 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9959 format %{ "DATA $dst,$src" %}
9960 opcode(0xD9, 0xF3);
9961 ins_encode( Push_SrcD(src),
9962 OpcP, OpcS, Push_ResultD(dst) );
9963 ins_pipe( pipe_slow );
9964 %}
9966 instruct sqrtDPR_reg(regDPR dst, regDPR src) %{
9967 predicate (UseSSE<=1);
9968 match(Set dst (SqrtD src));
9969 format %{ "DSQRT $dst,$src" %}
9970 opcode(0xFA, 0xD9);
9971 ins_encode( Push_Reg_DPR(src),
9972 OpcS, OpcP, Pop_Reg_DPR(dst) );
9973 ins_pipe( pipe_slow );
9974 %}
9976 instruct powDPR_reg(regDPR X, regDPR1 Y, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9977 predicate (UseSSE<=1);
9978 match(Set Y (PowD X Y)); // Raise X to the Yth power
9979 effect(KILL rax, KILL rdx, KILL rcx, KILL cr);
9980 format %{ "fast_pow $X $Y -> $Y // KILL $rax, $rcx, $rdx" %}
9981 ins_encode %{
9982 __ subptr(rsp, 8);
9983 __ fld_s($X$$reg - 1);
9984 __ fast_pow();
9985 __ addptr(rsp, 8);
9986 %}
9987 ins_pipe( pipe_slow );
9988 %}
9990 instruct powD_reg(regD dst, regD src0, regD src1, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9991 predicate (UseSSE>=2);
9992 match(Set dst (PowD src0 src1)); // Raise src0 to the src1'th power
9993 effect(KILL rax, KILL rdx, KILL rcx, KILL cr);
9994 format %{ "fast_pow $src0 $src1 -> $dst // KILL $rax, $rcx, $rdx" %}
9995 ins_encode %{
9996 __ subptr(rsp, 8);
9997 __ movdbl(Address(rsp, 0), $src1$$XMMRegister);
9998 __ fld_d(Address(rsp, 0));
9999 __ movdbl(Address(rsp, 0), $src0$$XMMRegister);
10000 __ fld_d(Address(rsp, 0));
10001 __ fast_pow();
10002 __ fstp_d(Address(rsp, 0));
10003 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
10004 __ addptr(rsp, 8);
10005 %}
10006 ins_pipe( pipe_slow );
10007 %}
10010 instruct expDPR_reg(regDPR1 dpr1, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
10011 predicate (UseSSE<=1);
10012 match(Set dpr1 (ExpD dpr1));
10013 effect(KILL rax, KILL rcx, KILL rdx, KILL cr);
10014 format %{ "fast_exp $dpr1 -> $dpr1 // KILL $rax, $rcx, $rdx" %}
10015 ins_encode %{
10016 __ fast_exp();
10017 %}
10018 ins_pipe( pipe_slow );
10019 %}
10021 instruct expD_reg(regD dst, regD src, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
10022 predicate (UseSSE>=2);
10023 match(Set dst (ExpD src));
10024 effect(KILL rax, KILL rcx, KILL rdx, KILL cr);
10025 format %{ "fast_exp $dst -> $src // KILL $rax, $rcx, $rdx" %}
10026 ins_encode %{
10027 __ subptr(rsp, 8);
10028 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10029 __ fld_d(Address(rsp, 0));
10030 __ fast_exp();
10031 __ fstp_d(Address(rsp, 0));
10032 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
10033 __ addptr(rsp, 8);
10034 %}
10035 ins_pipe( pipe_slow );
10036 %}
10038 instruct log10DPR_reg(regDPR1 dst, regDPR1 src) %{
10039 predicate (UseSSE<=1);
10040 // The source Double operand on FPU stack
10041 match(Set dst (Log10D src));
10042 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10043 // fxch ; swap ST(0) with ST(1)
10044 // fyl2x ; compute log_10(2) * log_2(x)
10045 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10046 "FXCH \n\t"
10047 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10048 %}
10049 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10050 Opcode(0xD9), Opcode(0xC9), // fxch
10051 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10053 ins_pipe( pipe_slow );
10054 %}
10056 instruct log10D_reg(regD dst, regD src, eFlagsReg cr) %{
10057 predicate (UseSSE>=2);
10058 effect(KILL cr);
10059 match(Set dst (Log10D src));
10060 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10061 // fyl2x ; compute log_10(2) * log_2(x)
10062 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10063 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10064 %}
10065 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10066 Push_SrcD(src),
10067 Opcode(0xD9), Opcode(0xF1), // fyl2x
10068 Push_ResultD(dst));
10070 ins_pipe( pipe_slow );
10071 %}
10073 instruct logDPR_reg(regDPR1 dst, regDPR1 src) %{
10074 predicate (UseSSE<=1);
10075 // The source Double operand on FPU stack
10076 match(Set dst (LogD src));
10077 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10078 // fxch ; swap ST(0) with ST(1)
10079 // fyl2x ; compute log_e(2) * log_2(x)
10080 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10081 "FXCH \n\t"
10082 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10083 %}
10084 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10085 Opcode(0xD9), Opcode(0xC9), // fxch
10086 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10088 ins_pipe( pipe_slow );
10089 %}
10091 instruct logD_reg(regD dst, regD src, eFlagsReg cr) %{
10092 predicate (UseSSE>=2);
10093 effect(KILL cr);
10094 // The source and result Double operands in XMM registers
10095 match(Set dst (LogD src));
10096 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10097 // fyl2x ; compute log_e(2) * log_2(x)
10098 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10099 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10100 %}
10101 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10102 Push_SrcD(src),
10103 Opcode(0xD9), Opcode(0xF1), // fyl2x
10104 Push_ResultD(dst));
10105 ins_pipe( pipe_slow );
10106 %}
10108 //-------------Float Instructions-------------------------------
10109 // Float Math
10111 // Code for float compare:
10112 // fcompp();
10113 // fwait(); fnstsw_ax();
10114 // sahf();
10115 // movl(dst, unordered_result);
10116 // jcc(Assembler::parity, exit);
10117 // movl(dst, less_result);
10118 // jcc(Assembler::below, exit);
10119 // movl(dst, equal_result);
10120 // jcc(Assembler::equal, exit);
10121 // movl(dst, greater_result);
10122 // exit:
10124 // P6 version of float compare, sets condition codes in EFLAGS
10125 instruct cmpFPR_cc_P6(eFlagsRegU cr, regFPR src1, regFPR src2, eAXRegI rax) %{
10126 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10127 match(Set cr (CmpF src1 src2));
10128 effect(KILL rax);
10129 ins_cost(150);
10130 format %{ "FLD $src1\n\t"
10131 "FUCOMIP ST,$src2 // P6 instruction\n\t"
10132 "JNP exit\n\t"
10133 "MOV ah,1 // saw a NaN, set CF (treat as LT)\n\t"
10134 "SAHF\n"
10135 "exit:\tNOP // avoid branch to branch" %}
10136 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10137 ins_encode( Push_Reg_DPR(src1),
10138 OpcP, RegOpc(src2),
10139 cmpF_P6_fixup );
10140 ins_pipe( pipe_slow );
10141 %}
10143 instruct cmpFPR_cc_P6CF(eFlagsRegUCF cr, regFPR src1, regFPR src2) %{
10144 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10145 match(Set cr (CmpF src1 src2));
10146 ins_cost(100);
10147 format %{ "FLD $src1\n\t"
10148 "FUCOMIP ST,$src2 // P6 instruction" %}
10149 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10150 ins_encode( Push_Reg_DPR(src1),
10151 OpcP, RegOpc(src2));
10152 ins_pipe( pipe_slow );
10153 %}
10156 // Compare & branch
10157 instruct cmpFPR_cc(eFlagsRegU cr, regFPR src1, regFPR src2, eAXRegI rax) %{
10158 predicate(UseSSE == 0);
10159 match(Set cr (CmpF src1 src2));
10160 effect(KILL rax);
10161 ins_cost(200);
10162 format %{ "FLD $src1\n\t"
10163 "FCOMp $src2\n\t"
10164 "FNSTSW AX\n\t"
10165 "TEST AX,0x400\n\t"
10166 "JZ,s flags\n\t"
10167 "MOV AH,1\t# unordered treat as LT\n"
10168 "flags:\tSAHF" %}
10169 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10170 ins_encode( Push_Reg_DPR(src1),
10171 OpcP, RegOpc(src2),
10172 fpu_flags);
10173 ins_pipe( pipe_slow );
10174 %}
10176 // Compare vs zero into -1,0,1
10177 instruct cmpFPR_0(rRegI dst, regFPR src1, immFPR0 zero, eAXRegI rax, eFlagsReg cr) %{
10178 predicate(UseSSE == 0);
10179 match(Set dst (CmpF3 src1 zero));
10180 effect(KILL cr, KILL rax);
10181 ins_cost(280);
10182 format %{ "FTSTF $dst,$src1" %}
10183 opcode(0xE4, 0xD9);
10184 ins_encode( Push_Reg_DPR(src1),
10185 OpcS, OpcP, PopFPU,
10186 CmpF_Result(dst));
10187 ins_pipe( pipe_slow );
10188 %}
10190 // Compare into -1,0,1
10191 instruct cmpFPR_reg(rRegI dst, regFPR src1, regFPR src2, eAXRegI rax, eFlagsReg cr) %{
10192 predicate(UseSSE == 0);
10193 match(Set dst (CmpF3 src1 src2));
10194 effect(KILL cr, KILL rax);
10195 ins_cost(300);
10196 format %{ "FCMPF $dst,$src1,$src2" %}
10197 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10198 ins_encode( Push_Reg_DPR(src1),
10199 OpcP, RegOpc(src2),
10200 CmpF_Result(dst));
10201 ins_pipe( pipe_slow );
10202 %}
10204 // float compare and set condition codes in EFLAGS by XMM regs
10205 instruct cmpF_cc(eFlagsRegU cr, regF src1, regF src2) %{
10206 predicate(UseSSE>=1);
10207 match(Set cr (CmpF src1 src2));
10208 ins_cost(145);
10209 format %{ "UCOMISS $src1,$src2\n\t"
10210 "JNP,s exit\n\t"
10211 "PUSHF\t# saw NaN, set CF\n\t"
10212 "AND [rsp], #0xffffff2b\n\t"
10213 "POPF\n"
10214 "exit:" %}
10215 ins_encode %{
10216 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10217 emit_cmpfp_fixup(_masm);
10218 %}
10219 ins_pipe( pipe_slow );
10220 %}
10222 instruct cmpF_ccCF(eFlagsRegUCF cr, regF src1, regF src2) %{
10223 predicate(UseSSE>=1);
10224 match(Set cr (CmpF src1 src2));
10225 ins_cost(100);
10226 format %{ "UCOMISS $src1,$src2" %}
10227 ins_encode %{
10228 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10229 %}
10230 ins_pipe( pipe_slow );
10231 %}
10233 // float compare and set condition codes in EFLAGS by XMM regs
10234 instruct cmpF_ccmem(eFlagsRegU cr, regF src1, memory src2) %{
10235 predicate(UseSSE>=1);
10236 match(Set cr (CmpF src1 (LoadF src2)));
10237 ins_cost(165);
10238 format %{ "UCOMISS $src1,$src2\n\t"
10239 "JNP,s exit\n\t"
10240 "PUSHF\t# saw NaN, set CF\n\t"
10241 "AND [rsp], #0xffffff2b\n\t"
10242 "POPF\n"
10243 "exit:" %}
10244 ins_encode %{
10245 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10246 emit_cmpfp_fixup(_masm);
10247 %}
10248 ins_pipe( pipe_slow );
10249 %}
10251 instruct cmpF_ccmemCF(eFlagsRegUCF cr, regF src1, memory src2) %{
10252 predicate(UseSSE>=1);
10253 match(Set cr (CmpF src1 (LoadF src2)));
10254 ins_cost(100);
10255 format %{ "UCOMISS $src1,$src2" %}
10256 ins_encode %{
10257 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10258 %}
10259 ins_pipe( pipe_slow );
10260 %}
10262 // Compare into -1,0,1 in XMM
10263 instruct cmpF_reg(xRegI dst, regF src1, regF src2, eFlagsReg cr) %{
10264 predicate(UseSSE>=1);
10265 match(Set dst (CmpF3 src1 src2));
10266 effect(KILL cr);
10267 ins_cost(255);
10268 format %{ "UCOMISS $src1, $src2\n\t"
10269 "MOV $dst, #-1\n\t"
10270 "JP,s done\n\t"
10271 "JB,s done\n\t"
10272 "SETNE $dst\n\t"
10273 "MOVZB $dst, $dst\n"
10274 "done:" %}
10275 ins_encode %{
10276 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10277 emit_cmpfp3(_masm, $dst$$Register);
10278 %}
10279 ins_pipe( pipe_slow );
10280 %}
10282 // Compare into -1,0,1 in XMM and memory
10283 instruct cmpF_regmem(xRegI dst, regF src1, memory src2, eFlagsReg cr) %{
10284 predicate(UseSSE>=1);
10285 match(Set dst (CmpF3 src1 (LoadF src2)));
10286 effect(KILL cr);
10287 ins_cost(275);
10288 format %{ "UCOMISS $src1, $src2\n\t"
10289 "MOV $dst, #-1\n\t"
10290 "JP,s done\n\t"
10291 "JB,s done\n\t"
10292 "SETNE $dst\n\t"
10293 "MOVZB $dst, $dst\n"
10294 "done:" %}
10295 ins_encode %{
10296 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10297 emit_cmpfp3(_masm, $dst$$Register);
10298 %}
10299 ins_pipe( pipe_slow );
10300 %}
10302 // Spill to obtain 24-bit precision
10303 instruct subFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10304 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10305 match(Set dst (SubF src1 src2));
10307 format %{ "FSUB $dst,$src1 - $src2" %}
10308 opcode(0xD8, 0x4); /* D8 E0+i or D8 /4 mod==0x3 ;; result in TOS */
10309 ins_encode( Push_Reg_FPR(src1),
10310 OpcReg_FPR(src2),
10311 Pop_Mem_FPR(dst) );
10312 ins_pipe( fpu_mem_reg_reg );
10313 %}
10314 //
10315 // This instruction does not round to 24-bits
10316 instruct subFPR_reg(regFPR dst, regFPR src) %{
10317 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10318 match(Set dst (SubF dst src));
10320 format %{ "FSUB $dst,$src" %}
10321 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
10322 ins_encode( Push_Reg_FPR(src),
10323 OpcP, RegOpc(dst) );
10324 ins_pipe( fpu_reg_reg );
10325 %}
10327 // Spill to obtain 24-bit precision
10328 instruct addFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10329 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10330 match(Set dst (AddF src1 src2));
10332 format %{ "FADD $dst,$src1,$src2" %}
10333 opcode(0xD8, 0x0); /* D8 C0+i */
10334 ins_encode( Push_Reg_FPR(src2),
10335 OpcReg_FPR(src1),
10336 Pop_Mem_FPR(dst) );
10337 ins_pipe( fpu_mem_reg_reg );
10338 %}
10339 //
10340 // This instruction does not round to 24-bits
10341 instruct addFPR_reg(regFPR dst, regFPR src) %{
10342 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10343 match(Set dst (AddF dst src));
10345 format %{ "FLD $src\n\t"
10346 "FADDp $dst,ST" %}
10347 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
10348 ins_encode( Push_Reg_FPR(src),
10349 OpcP, RegOpc(dst) );
10350 ins_pipe( fpu_reg_reg );
10351 %}
10353 instruct absFPR_reg(regFPR1 dst, regFPR1 src) %{
10354 predicate(UseSSE==0);
10355 match(Set dst (AbsF src));
10356 ins_cost(100);
10357 format %{ "FABS" %}
10358 opcode(0xE1, 0xD9);
10359 ins_encode( OpcS, OpcP );
10360 ins_pipe( fpu_reg_reg );
10361 %}
10363 instruct negFPR_reg(regFPR1 dst, regFPR1 src) %{
10364 predicate(UseSSE==0);
10365 match(Set dst (NegF src));
10366 ins_cost(100);
10367 format %{ "FCHS" %}
10368 opcode(0xE0, 0xD9);
10369 ins_encode( OpcS, OpcP );
10370 ins_pipe( fpu_reg_reg );
10371 %}
10373 // Cisc-alternate to addFPR_reg
10374 // Spill to obtain 24-bit precision
10375 instruct addFPR24_reg_mem(stackSlotF dst, regFPR src1, memory src2) %{
10376 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10377 match(Set dst (AddF src1 (LoadF src2)));
10379 format %{ "FLD $src2\n\t"
10380 "FADD ST,$src1\n\t"
10381 "FSTP_S $dst" %}
10382 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10383 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10384 OpcReg_FPR(src1),
10385 Pop_Mem_FPR(dst) );
10386 ins_pipe( fpu_mem_reg_mem );
10387 %}
10388 //
10389 // Cisc-alternate to addFPR_reg
10390 // This instruction does not round to 24-bits
10391 instruct addFPR_reg_mem(regFPR dst, memory src) %{
10392 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10393 match(Set dst (AddF dst (LoadF src)));
10395 format %{ "FADD $dst,$src" %}
10396 opcode(0xDE, 0x0, 0xD9); /* DE C0+i or DE /0*/ /* LoadF D9 /0 */
10397 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10398 OpcP, RegOpc(dst) );
10399 ins_pipe( fpu_reg_mem );
10400 %}
10402 // // Following two instructions for _222_mpegaudio
10403 // Spill to obtain 24-bit precision
10404 instruct addFPR24_mem_reg(stackSlotF dst, regFPR src2, memory src1 ) %{
10405 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10406 match(Set dst (AddF src1 src2));
10408 format %{ "FADD $dst,$src1,$src2" %}
10409 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10410 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src1),
10411 OpcReg_FPR(src2),
10412 Pop_Mem_FPR(dst) );
10413 ins_pipe( fpu_mem_reg_mem );
10414 %}
10416 // Cisc-spill variant
10417 // Spill to obtain 24-bit precision
10418 instruct addFPR24_mem_cisc(stackSlotF dst, memory src1, memory src2) %{
10419 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10420 match(Set dst (AddF src1 (LoadF src2)));
10422 format %{ "FADD $dst,$src1,$src2 cisc" %}
10423 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10424 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10425 set_instruction_start,
10426 OpcP, RMopc_Mem(secondary,src1),
10427 Pop_Mem_FPR(dst) );
10428 ins_pipe( fpu_mem_mem_mem );
10429 %}
10431 // Spill to obtain 24-bit precision
10432 instruct addFPR24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
10433 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10434 match(Set dst (AddF src1 src2));
10436 format %{ "FADD $dst,$src1,$src2" %}
10437 opcode(0xD8, 0x0, 0xD9); /* D8 /0 */ /* LoadF D9 /0 */
10438 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10439 set_instruction_start,
10440 OpcP, RMopc_Mem(secondary,src1),
10441 Pop_Mem_FPR(dst) );
10442 ins_pipe( fpu_mem_mem_mem );
10443 %}
10446 // Spill to obtain 24-bit precision
10447 instruct addFPR24_reg_imm(stackSlotF dst, regFPR src, immFPR con) %{
10448 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10449 match(Set dst (AddF src con));
10450 format %{ "FLD $src\n\t"
10451 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10452 "FSTP_S $dst" %}
10453 ins_encode %{
10454 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10455 __ fadd_s($constantaddress($con));
10456 __ fstp_s(Address(rsp, $dst$$disp));
10457 %}
10458 ins_pipe(fpu_mem_reg_con);
10459 %}
10460 //
10461 // This instruction does not round to 24-bits
10462 instruct addFPR_reg_imm(regFPR dst, regFPR src, immFPR con) %{
10463 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10464 match(Set dst (AddF src con));
10465 format %{ "FLD $src\n\t"
10466 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10467 "FSTP $dst" %}
10468 ins_encode %{
10469 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10470 __ fadd_s($constantaddress($con));
10471 __ fstp_d($dst$$reg);
10472 %}
10473 ins_pipe(fpu_reg_reg_con);
10474 %}
10476 // Spill to obtain 24-bit precision
10477 instruct mulFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10478 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10479 match(Set dst (MulF src1 src2));
10481 format %{ "FLD $src1\n\t"
10482 "FMUL $src2\n\t"
10483 "FSTP_S $dst" %}
10484 opcode(0xD8, 0x1); /* D8 C8+i or D8 /1 ;; result in TOS */
10485 ins_encode( Push_Reg_FPR(src1),
10486 OpcReg_FPR(src2),
10487 Pop_Mem_FPR(dst) );
10488 ins_pipe( fpu_mem_reg_reg );
10489 %}
10490 //
10491 // This instruction does not round to 24-bits
10492 instruct mulFPR_reg(regFPR dst, regFPR src1, regFPR src2) %{
10493 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10494 match(Set dst (MulF src1 src2));
10496 format %{ "FLD $src1\n\t"
10497 "FMUL $src2\n\t"
10498 "FSTP_S $dst" %}
10499 opcode(0xD8, 0x1); /* D8 C8+i */
10500 ins_encode( Push_Reg_FPR(src2),
10501 OpcReg_FPR(src1),
10502 Pop_Reg_FPR(dst) );
10503 ins_pipe( fpu_reg_reg_reg );
10504 %}
10507 // Spill to obtain 24-bit precision
10508 // Cisc-alternate to reg-reg multiply
10509 instruct mulFPR24_reg_mem(stackSlotF dst, regFPR src1, memory src2) %{
10510 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10511 match(Set dst (MulF src1 (LoadF src2)));
10513 format %{ "FLD_S $src2\n\t"
10514 "FMUL $src1\n\t"
10515 "FSTP_S $dst" %}
10516 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or DE /1*/ /* LoadF D9 /0 */
10517 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10518 OpcReg_FPR(src1),
10519 Pop_Mem_FPR(dst) );
10520 ins_pipe( fpu_mem_reg_mem );
10521 %}
10522 //
10523 // This instruction does not round to 24-bits
10524 // Cisc-alternate to reg-reg multiply
10525 instruct mulFPR_reg_mem(regFPR dst, regFPR src1, memory src2) %{
10526 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10527 match(Set dst (MulF src1 (LoadF src2)));
10529 format %{ "FMUL $dst,$src1,$src2" %}
10530 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadF D9 /0 */
10531 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10532 OpcReg_FPR(src1),
10533 Pop_Reg_FPR(dst) );
10534 ins_pipe( fpu_reg_reg_mem );
10535 %}
10537 // Spill to obtain 24-bit precision
10538 instruct mulFPR24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
10539 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10540 match(Set dst (MulF src1 src2));
10542 format %{ "FMUL $dst,$src1,$src2" %}
10543 opcode(0xD8, 0x1, 0xD9); /* D8 /1 */ /* LoadF D9 /0 */
10544 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10545 set_instruction_start,
10546 OpcP, RMopc_Mem(secondary,src1),
10547 Pop_Mem_FPR(dst) );
10548 ins_pipe( fpu_mem_mem_mem );
10549 %}
10551 // Spill to obtain 24-bit precision
10552 instruct mulFPR24_reg_imm(stackSlotF dst, regFPR src, immFPR con) %{
10553 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10554 match(Set dst (MulF src con));
10556 format %{ "FLD $src\n\t"
10557 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10558 "FSTP_S $dst" %}
10559 ins_encode %{
10560 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10561 __ fmul_s($constantaddress($con));
10562 __ fstp_s(Address(rsp, $dst$$disp));
10563 %}
10564 ins_pipe(fpu_mem_reg_con);
10565 %}
10566 //
10567 // This instruction does not round to 24-bits
10568 instruct mulFPR_reg_imm(regFPR dst, regFPR src, immFPR con) %{
10569 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10570 match(Set dst (MulF src con));
10572 format %{ "FLD $src\n\t"
10573 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10574 "FSTP $dst" %}
10575 ins_encode %{
10576 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10577 __ fmul_s($constantaddress($con));
10578 __ fstp_d($dst$$reg);
10579 %}
10580 ins_pipe(fpu_reg_reg_con);
10581 %}
10584 //
10585 // MACRO1 -- subsume unshared load into mulFPR
10586 // This instruction does not round to 24-bits
10587 instruct mulFPR_reg_load1(regFPR dst, regFPR src, memory mem1 ) %{
10588 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10589 match(Set dst (MulF (LoadF mem1) src));
10591 format %{ "FLD $mem1 ===MACRO1===\n\t"
10592 "FMUL ST,$src\n\t"
10593 "FSTP $dst" %}
10594 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or D8 /1 */ /* LoadF D9 /0 */
10595 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem1),
10596 OpcReg_FPR(src),
10597 Pop_Reg_FPR(dst) );
10598 ins_pipe( fpu_reg_reg_mem );
10599 %}
10600 //
10601 // MACRO2 -- addFPR a mulFPR which subsumed an unshared load
10602 // This instruction does not round to 24-bits
10603 instruct addFPR_mulFPR_reg_load1(regFPR dst, memory mem1, regFPR src1, regFPR src2) %{
10604 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10605 match(Set dst (AddF (MulF (LoadF mem1) src1) src2));
10606 ins_cost(95);
10608 format %{ "FLD $mem1 ===MACRO2===\n\t"
10609 "FMUL ST,$src1 subsume mulFPR left load\n\t"
10610 "FADD ST,$src2\n\t"
10611 "FSTP $dst" %}
10612 opcode(0xD9); /* LoadF D9 /0 */
10613 ins_encode( OpcP, RMopc_Mem(0x00,mem1),
10614 FMul_ST_reg(src1),
10615 FAdd_ST_reg(src2),
10616 Pop_Reg_FPR(dst) );
10617 ins_pipe( fpu_reg_mem_reg_reg );
10618 %}
10620 // MACRO3 -- addFPR a mulFPR
10621 // This instruction does not round to 24-bits. It is a '2-address'
10622 // instruction in that the result goes back to src2. This eliminates
10623 // a move from the macro; possibly the register allocator will have
10624 // to add it back (and maybe not).
10625 instruct addFPR_mulFPR_reg(regFPR src2, regFPR src1, regFPR src0) %{
10626 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10627 match(Set src2 (AddF (MulF src0 src1) src2));
10629 format %{ "FLD $src0 ===MACRO3===\n\t"
10630 "FMUL ST,$src1\n\t"
10631 "FADDP $src2,ST" %}
10632 opcode(0xD9); /* LoadF D9 /0 */
10633 ins_encode( Push_Reg_FPR(src0),
10634 FMul_ST_reg(src1),
10635 FAddP_reg_ST(src2) );
10636 ins_pipe( fpu_reg_reg_reg );
10637 %}
10639 // MACRO4 -- divFPR subFPR
10640 // This instruction does not round to 24-bits
10641 instruct subFPR_divFPR_reg(regFPR dst, regFPR src1, regFPR src2, regFPR src3) %{
10642 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10643 match(Set dst (DivF (SubF src2 src1) src3));
10645 format %{ "FLD $src2 ===MACRO4===\n\t"
10646 "FSUB ST,$src1\n\t"
10647 "FDIV ST,$src3\n\t"
10648 "FSTP $dst" %}
10649 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10650 ins_encode( Push_Reg_FPR(src2),
10651 subFPR_divFPR_encode(src1,src3),
10652 Pop_Reg_FPR(dst) );
10653 ins_pipe( fpu_reg_reg_reg_reg );
10654 %}
10656 // Spill to obtain 24-bit precision
10657 instruct divFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10658 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10659 match(Set dst (DivF src1 src2));
10661 format %{ "FDIV $dst,$src1,$src2" %}
10662 opcode(0xD8, 0x6); /* D8 F0+i or DE /6*/
10663 ins_encode( Push_Reg_FPR(src1),
10664 OpcReg_FPR(src2),
10665 Pop_Mem_FPR(dst) );
10666 ins_pipe( fpu_mem_reg_reg );
10667 %}
10668 //
10669 // This instruction does not round to 24-bits
10670 instruct divFPR_reg(regFPR dst, regFPR src) %{
10671 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10672 match(Set dst (DivF dst src));
10674 format %{ "FDIV $dst,$src" %}
10675 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10676 ins_encode( Push_Reg_FPR(src),
10677 OpcP, RegOpc(dst) );
10678 ins_pipe( fpu_reg_reg );
10679 %}
10682 // Spill to obtain 24-bit precision
10683 instruct modFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2, eAXRegI rax, eFlagsReg cr) %{
10684 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
10685 match(Set dst (ModF src1 src2));
10686 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
10688 format %{ "FMOD $dst,$src1,$src2" %}
10689 ins_encode( Push_Reg_Mod_DPR(src1, src2),
10690 emitModDPR(),
10691 Push_Result_Mod_DPR(src2),
10692 Pop_Mem_FPR(dst));
10693 ins_pipe( pipe_slow );
10694 %}
10695 //
10696 // This instruction does not round to 24-bits
10697 instruct modFPR_reg(regFPR dst, regFPR src, eAXRegI rax, eFlagsReg cr) %{
10698 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
10699 match(Set dst (ModF dst src));
10700 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
10702 format %{ "FMOD $dst,$src" %}
10703 ins_encode(Push_Reg_Mod_DPR(dst, src),
10704 emitModDPR(),
10705 Push_Result_Mod_DPR(src),
10706 Pop_Reg_FPR(dst));
10707 ins_pipe( pipe_slow );
10708 %}
10710 instruct modF_reg(regF dst, regF src0, regF src1, eAXRegI rax, eFlagsReg cr) %{
10711 predicate(UseSSE>=1);
10712 match(Set dst (ModF src0 src1));
10713 effect(KILL rax, KILL cr);
10714 format %{ "SUB ESP,4\t # FMOD\n"
10715 "\tMOVSS [ESP+0],$src1\n"
10716 "\tFLD_S [ESP+0]\n"
10717 "\tMOVSS [ESP+0],$src0\n"
10718 "\tFLD_S [ESP+0]\n"
10719 "loop:\tFPREM\n"
10720 "\tFWAIT\n"
10721 "\tFNSTSW AX\n"
10722 "\tSAHF\n"
10723 "\tJP loop\n"
10724 "\tFSTP_S [ESP+0]\n"
10725 "\tMOVSS $dst,[ESP+0]\n"
10726 "\tADD ESP,4\n"
10727 "\tFSTP ST0\t # Restore FPU Stack"
10728 %}
10729 ins_cost(250);
10730 ins_encode( Push_ModF_encoding(src0, src1), emitModDPR(), Push_ResultF(dst,0x4), PopFPU);
10731 ins_pipe( pipe_slow );
10732 %}
10735 //----------Arithmetic Conversion Instructions---------------------------------
10736 // The conversions operations are all Alpha sorted. Please keep it that way!
10738 instruct roundFloat_mem_reg(stackSlotF dst, regFPR src) %{
10739 predicate(UseSSE==0);
10740 match(Set dst (RoundFloat src));
10741 ins_cost(125);
10742 format %{ "FST_S $dst,$src\t# F-round" %}
10743 ins_encode( Pop_Mem_Reg_FPR(dst, src) );
10744 ins_pipe( fpu_mem_reg );
10745 %}
10747 instruct roundDouble_mem_reg(stackSlotD dst, regDPR src) %{
10748 predicate(UseSSE<=1);
10749 match(Set dst (RoundDouble src));
10750 ins_cost(125);
10751 format %{ "FST_D $dst,$src\t# D-round" %}
10752 ins_encode( Pop_Mem_Reg_DPR(dst, src) );
10753 ins_pipe( fpu_mem_reg );
10754 %}
10756 // Force rounding to 24-bit precision and 6-bit exponent
10757 instruct convDPR2FPR_reg(stackSlotF dst, regDPR src) %{
10758 predicate(UseSSE==0);
10759 match(Set dst (ConvD2F src));
10760 format %{ "FST_S $dst,$src\t# F-round" %}
10761 expand %{
10762 roundFloat_mem_reg(dst,src);
10763 %}
10764 %}
10766 // Force rounding to 24-bit precision and 6-bit exponent
10767 instruct convDPR2F_reg(regF dst, regDPR src, eFlagsReg cr) %{
10768 predicate(UseSSE==1);
10769 match(Set dst (ConvD2F src));
10770 effect( KILL cr );
10771 format %{ "SUB ESP,4\n\t"
10772 "FST_S [ESP],$src\t# F-round\n\t"
10773 "MOVSS $dst,[ESP]\n\t"
10774 "ADD ESP,4" %}
10775 ins_encode %{
10776 __ subptr(rsp, 4);
10777 if ($src$$reg != FPR1L_enc) {
10778 __ fld_s($src$$reg-1);
10779 __ fstp_s(Address(rsp, 0));
10780 } else {
10781 __ fst_s(Address(rsp, 0));
10782 }
10783 __ movflt($dst$$XMMRegister, Address(rsp, 0));
10784 __ addptr(rsp, 4);
10785 %}
10786 ins_pipe( pipe_slow );
10787 %}
10789 // Force rounding double precision to single precision
10790 instruct convD2F_reg(regF dst, regD src) %{
10791 predicate(UseSSE>=2);
10792 match(Set dst (ConvD2F src));
10793 format %{ "CVTSD2SS $dst,$src\t# F-round" %}
10794 ins_encode %{
10795 __ cvtsd2ss ($dst$$XMMRegister, $src$$XMMRegister);
10796 %}
10797 ins_pipe( pipe_slow );
10798 %}
10800 instruct convFPR2DPR_reg_reg(regDPR dst, regFPR src) %{
10801 predicate(UseSSE==0);
10802 match(Set dst (ConvF2D src));
10803 format %{ "FST_S $dst,$src\t# D-round" %}
10804 ins_encode( Pop_Reg_Reg_DPR(dst, src));
10805 ins_pipe( fpu_reg_reg );
10806 %}
10808 instruct convFPR2D_reg(stackSlotD dst, regFPR src) %{
10809 predicate(UseSSE==1);
10810 match(Set dst (ConvF2D src));
10811 format %{ "FST_D $dst,$src\t# D-round" %}
10812 expand %{
10813 roundDouble_mem_reg(dst,src);
10814 %}
10815 %}
10817 instruct convF2DPR_reg(regDPR dst, regF src, eFlagsReg cr) %{
10818 predicate(UseSSE==1);
10819 match(Set dst (ConvF2D src));
10820 effect( KILL cr );
10821 format %{ "SUB ESP,4\n\t"
10822 "MOVSS [ESP] $src\n\t"
10823 "FLD_S [ESP]\n\t"
10824 "ADD ESP,4\n\t"
10825 "FSTP $dst\t# D-round" %}
10826 ins_encode %{
10827 __ subptr(rsp, 4);
10828 __ movflt(Address(rsp, 0), $src$$XMMRegister);
10829 __ fld_s(Address(rsp, 0));
10830 __ addptr(rsp, 4);
10831 __ fstp_d($dst$$reg);
10832 %}
10833 ins_pipe( pipe_slow );
10834 %}
10836 instruct convF2D_reg(regD dst, regF src) %{
10837 predicate(UseSSE>=2);
10838 match(Set dst (ConvF2D src));
10839 format %{ "CVTSS2SD $dst,$src\t# D-round" %}
10840 ins_encode %{
10841 __ cvtss2sd ($dst$$XMMRegister, $src$$XMMRegister);
10842 %}
10843 ins_pipe( pipe_slow );
10844 %}
10846 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
10847 instruct convDPR2I_reg_reg( eAXRegI dst, eDXRegI tmp, regDPR src, eFlagsReg cr ) %{
10848 predicate(UseSSE<=1);
10849 match(Set dst (ConvD2I src));
10850 effect( KILL tmp, KILL cr );
10851 format %{ "FLD $src\t# Convert double to int \n\t"
10852 "FLDCW trunc mode\n\t"
10853 "SUB ESP,4\n\t"
10854 "FISTp [ESP + #0]\n\t"
10855 "FLDCW std/24-bit mode\n\t"
10856 "POP EAX\n\t"
10857 "CMP EAX,0x80000000\n\t"
10858 "JNE,s fast\n\t"
10859 "FLD_D $src\n\t"
10860 "CALL d2i_wrapper\n"
10861 "fast:" %}
10862 ins_encode( Push_Reg_DPR(src), DPR2I_encoding(src) );
10863 ins_pipe( pipe_slow );
10864 %}
10866 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
10867 instruct convD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regD src, eFlagsReg cr ) %{
10868 predicate(UseSSE>=2);
10869 match(Set dst (ConvD2I src));
10870 effect( KILL tmp, KILL cr );
10871 format %{ "CVTTSD2SI $dst, $src\n\t"
10872 "CMP $dst,0x80000000\n\t"
10873 "JNE,s fast\n\t"
10874 "SUB ESP, 8\n\t"
10875 "MOVSD [ESP], $src\n\t"
10876 "FLD_D [ESP]\n\t"
10877 "ADD ESP, 8\n\t"
10878 "CALL d2i_wrapper\n"
10879 "fast:" %}
10880 ins_encode %{
10881 Label fast;
10882 __ cvttsd2sil($dst$$Register, $src$$XMMRegister);
10883 __ cmpl($dst$$Register, 0x80000000);
10884 __ jccb(Assembler::notEqual, fast);
10885 __ subptr(rsp, 8);
10886 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10887 __ fld_d(Address(rsp, 0));
10888 __ addptr(rsp, 8);
10889 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2i_wrapper())));
10890 __ bind(fast);
10891 %}
10892 ins_pipe( pipe_slow );
10893 %}
10895 instruct convDPR2L_reg_reg( eADXRegL dst, regDPR src, eFlagsReg cr ) %{
10896 predicate(UseSSE<=1);
10897 match(Set dst (ConvD2L src));
10898 effect( KILL cr );
10899 format %{ "FLD $src\t# Convert double to long\n\t"
10900 "FLDCW trunc mode\n\t"
10901 "SUB ESP,8\n\t"
10902 "FISTp [ESP + #0]\n\t"
10903 "FLDCW std/24-bit mode\n\t"
10904 "POP EAX\n\t"
10905 "POP EDX\n\t"
10906 "CMP EDX,0x80000000\n\t"
10907 "JNE,s fast\n\t"
10908 "TEST EAX,EAX\n\t"
10909 "JNE,s fast\n\t"
10910 "FLD $src\n\t"
10911 "CALL d2l_wrapper\n"
10912 "fast:" %}
10913 ins_encode( Push_Reg_DPR(src), DPR2L_encoding(src) );
10914 ins_pipe( pipe_slow );
10915 %}
10917 // XMM lacks a float/double->long conversion, so use the old FPU stack.
10918 instruct convD2L_reg_reg( eADXRegL dst, regD src, eFlagsReg cr ) %{
10919 predicate (UseSSE>=2);
10920 match(Set dst (ConvD2L src));
10921 effect( KILL cr );
10922 format %{ "SUB ESP,8\t# Convert double to long\n\t"
10923 "MOVSD [ESP],$src\n\t"
10924 "FLD_D [ESP]\n\t"
10925 "FLDCW trunc mode\n\t"
10926 "FISTp [ESP + #0]\n\t"
10927 "FLDCW std/24-bit mode\n\t"
10928 "POP EAX\n\t"
10929 "POP EDX\n\t"
10930 "CMP EDX,0x80000000\n\t"
10931 "JNE,s fast\n\t"
10932 "TEST EAX,EAX\n\t"
10933 "JNE,s fast\n\t"
10934 "SUB ESP,8\n\t"
10935 "MOVSD [ESP],$src\n\t"
10936 "FLD_D [ESP]\n\t"
10937 "ADD ESP,8\n\t"
10938 "CALL d2l_wrapper\n"
10939 "fast:" %}
10940 ins_encode %{
10941 Label fast;
10942 __ subptr(rsp, 8);
10943 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10944 __ fld_d(Address(rsp, 0));
10945 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_trunc()));
10946 __ fistp_d(Address(rsp, 0));
10947 // Restore the rounding mode, mask the exception
10948 if (Compile::current()->in_24_bit_fp_mode()) {
10949 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
10950 } else {
10951 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
10952 }
10953 // Load the converted long, adjust CPU stack
10954 __ pop(rax);
10955 __ pop(rdx);
10956 __ cmpl(rdx, 0x80000000);
10957 __ jccb(Assembler::notEqual, fast);
10958 __ testl(rax, rax);
10959 __ jccb(Assembler::notEqual, fast);
10960 __ subptr(rsp, 8);
10961 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10962 __ fld_d(Address(rsp, 0));
10963 __ addptr(rsp, 8);
10964 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2l_wrapper())));
10965 __ bind(fast);
10966 %}
10967 ins_pipe( pipe_slow );
10968 %}
10970 // Convert a double to an int. Java semantics require we do complex
10971 // manglations in the corner cases. So we set the rounding mode to
10972 // 'zero', store the darned double down as an int, and reset the
10973 // rounding mode to 'nearest'. The hardware stores a flag value down
10974 // if we would overflow or converted a NAN; we check for this and
10975 // and go the slow path if needed.
10976 instruct convFPR2I_reg_reg(eAXRegI dst, eDXRegI tmp, regFPR src, eFlagsReg cr ) %{
10977 predicate(UseSSE==0);
10978 match(Set dst (ConvF2I src));
10979 effect( KILL tmp, KILL cr );
10980 format %{ "FLD $src\t# Convert float to int \n\t"
10981 "FLDCW trunc mode\n\t"
10982 "SUB ESP,4\n\t"
10983 "FISTp [ESP + #0]\n\t"
10984 "FLDCW std/24-bit mode\n\t"
10985 "POP EAX\n\t"
10986 "CMP EAX,0x80000000\n\t"
10987 "JNE,s fast\n\t"
10988 "FLD $src\n\t"
10989 "CALL d2i_wrapper\n"
10990 "fast:" %}
10991 // DPR2I_encoding works for FPR2I
10992 ins_encode( Push_Reg_FPR(src), DPR2I_encoding(src) );
10993 ins_pipe( pipe_slow );
10994 %}
10996 // Convert a float in xmm to an int reg.
10997 instruct convF2I_reg(eAXRegI dst, eDXRegI tmp, regF src, eFlagsReg cr ) %{
10998 predicate(UseSSE>=1);
10999 match(Set dst (ConvF2I src));
11000 effect( KILL tmp, KILL cr );
11001 format %{ "CVTTSS2SI $dst, $src\n\t"
11002 "CMP $dst,0x80000000\n\t"
11003 "JNE,s fast\n\t"
11004 "SUB ESP, 4\n\t"
11005 "MOVSS [ESP], $src\n\t"
11006 "FLD [ESP]\n\t"
11007 "ADD ESP, 4\n\t"
11008 "CALL d2i_wrapper\n"
11009 "fast:" %}
11010 ins_encode %{
11011 Label fast;
11012 __ cvttss2sil($dst$$Register, $src$$XMMRegister);
11013 __ cmpl($dst$$Register, 0x80000000);
11014 __ jccb(Assembler::notEqual, fast);
11015 __ subptr(rsp, 4);
11016 __ movflt(Address(rsp, 0), $src$$XMMRegister);
11017 __ fld_s(Address(rsp, 0));
11018 __ addptr(rsp, 4);
11019 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2i_wrapper())));
11020 __ bind(fast);
11021 %}
11022 ins_pipe( pipe_slow );
11023 %}
11025 instruct convFPR2L_reg_reg( eADXRegL dst, regFPR src, eFlagsReg cr ) %{
11026 predicate(UseSSE==0);
11027 match(Set dst (ConvF2L src));
11028 effect( KILL cr );
11029 format %{ "FLD $src\t# Convert float to long\n\t"
11030 "FLDCW trunc mode\n\t"
11031 "SUB ESP,8\n\t"
11032 "FISTp [ESP + #0]\n\t"
11033 "FLDCW std/24-bit mode\n\t"
11034 "POP EAX\n\t"
11035 "POP EDX\n\t"
11036 "CMP EDX,0x80000000\n\t"
11037 "JNE,s fast\n\t"
11038 "TEST EAX,EAX\n\t"
11039 "JNE,s fast\n\t"
11040 "FLD $src\n\t"
11041 "CALL d2l_wrapper\n"
11042 "fast:" %}
11043 // DPR2L_encoding works for FPR2L
11044 ins_encode( Push_Reg_FPR(src), DPR2L_encoding(src) );
11045 ins_pipe( pipe_slow );
11046 %}
11048 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11049 instruct convF2L_reg_reg( eADXRegL dst, regF src, eFlagsReg cr ) %{
11050 predicate (UseSSE>=1);
11051 match(Set dst (ConvF2L src));
11052 effect( KILL cr );
11053 format %{ "SUB ESP,8\t# Convert float to long\n\t"
11054 "MOVSS [ESP],$src\n\t"
11055 "FLD_S [ESP]\n\t"
11056 "FLDCW trunc mode\n\t"
11057 "FISTp [ESP + #0]\n\t"
11058 "FLDCW std/24-bit mode\n\t"
11059 "POP EAX\n\t"
11060 "POP EDX\n\t"
11061 "CMP EDX,0x80000000\n\t"
11062 "JNE,s fast\n\t"
11063 "TEST EAX,EAX\n\t"
11064 "JNE,s fast\n\t"
11065 "SUB ESP,4\t# Convert float to long\n\t"
11066 "MOVSS [ESP],$src\n\t"
11067 "FLD_S [ESP]\n\t"
11068 "ADD ESP,4\n\t"
11069 "CALL d2l_wrapper\n"
11070 "fast:" %}
11071 ins_encode %{
11072 Label fast;
11073 __ subptr(rsp, 8);
11074 __ movflt(Address(rsp, 0), $src$$XMMRegister);
11075 __ fld_s(Address(rsp, 0));
11076 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_trunc()));
11077 __ fistp_d(Address(rsp, 0));
11078 // Restore the rounding mode, mask the exception
11079 if (Compile::current()->in_24_bit_fp_mode()) {
11080 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
11081 } else {
11082 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
11083 }
11084 // Load the converted long, adjust CPU stack
11085 __ pop(rax);
11086 __ pop(rdx);
11087 __ cmpl(rdx, 0x80000000);
11088 __ jccb(Assembler::notEqual, fast);
11089 __ testl(rax, rax);
11090 __ jccb(Assembler::notEqual, fast);
11091 __ subptr(rsp, 4);
11092 __ movflt(Address(rsp, 0), $src$$XMMRegister);
11093 __ fld_s(Address(rsp, 0));
11094 __ addptr(rsp, 4);
11095 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2l_wrapper())));
11096 __ bind(fast);
11097 %}
11098 ins_pipe( pipe_slow );
11099 %}
11101 instruct convI2DPR_reg(regDPR dst, stackSlotI src) %{
11102 predicate( UseSSE<=1 );
11103 match(Set dst (ConvI2D src));
11104 format %{ "FILD $src\n\t"
11105 "FSTP $dst" %}
11106 opcode(0xDB, 0x0); /* DB /0 */
11107 ins_encode(Push_Mem_I(src), Pop_Reg_DPR(dst));
11108 ins_pipe( fpu_reg_mem );
11109 %}
11111 instruct convI2D_reg(regD dst, rRegI src) %{
11112 predicate( UseSSE>=2 && !UseXmmI2D );
11113 match(Set dst (ConvI2D src));
11114 format %{ "CVTSI2SD $dst,$src" %}
11115 ins_encode %{
11116 __ cvtsi2sdl ($dst$$XMMRegister, $src$$Register);
11117 %}
11118 ins_pipe( pipe_slow );
11119 %}
11121 instruct convI2D_mem(regD dst, memory mem) %{
11122 predicate( UseSSE>=2 );
11123 match(Set dst (ConvI2D (LoadI mem)));
11124 format %{ "CVTSI2SD $dst,$mem" %}
11125 ins_encode %{
11126 __ cvtsi2sdl ($dst$$XMMRegister, $mem$$Address);
11127 %}
11128 ins_pipe( pipe_slow );
11129 %}
11131 instruct convXI2D_reg(regD dst, rRegI src)
11132 %{
11133 predicate( UseSSE>=2 && UseXmmI2D );
11134 match(Set dst (ConvI2D src));
11136 format %{ "MOVD $dst,$src\n\t"
11137 "CVTDQ2PD $dst,$dst\t# i2d" %}
11138 ins_encode %{
11139 __ movdl($dst$$XMMRegister, $src$$Register);
11140 __ cvtdq2pd($dst$$XMMRegister, $dst$$XMMRegister);
11141 %}
11142 ins_pipe(pipe_slow); // XXX
11143 %}
11145 instruct convI2DPR_mem(regDPR dst, memory mem) %{
11146 predicate( UseSSE<=1 && !Compile::current()->select_24_bit_instr());
11147 match(Set dst (ConvI2D (LoadI mem)));
11148 format %{ "FILD $mem\n\t"
11149 "FSTP $dst" %}
11150 opcode(0xDB); /* DB /0 */
11151 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11152 Pop_Reg_DPR(dst));
11153 ins_pipe( fpu_reg_mem );
11154 %}
11156 // Convert a byte to a float; no rounding step needed.
11157 instruct conv24I2FPR_reg(regFPR dst, stackSlotI src) %{
11158 predicate( UseSSE==0 && n->in(1)->Opcode() == Op_AndI && n->in(1)->in(2)->is_Con() && n->in(1)->in(2)->get_int() == 255 );
11159 match(Set dst (ConvI2F src));
11160 format %{ "FILD $src\n\t"
11161 "FSTP $dst" %}
11163 opcode(0xDB, 0x0); /* DB /0 */
11164 ins_encode(Push_Mem_I(src), Pop_Reg_FPR(dst));
11165 ins_pipe( fpu_reg_mem );
11166 %}
11168 // In 24-bit mode, force exponent rounding by storing back out
11169 instruct convI2FPR_SSF(stackSlotF dst, stackSlotI src) %{
11170 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11171 match(Set dst (ConvI2F src));
11172 ins_cost(200);
11173 format %{ "FILD $src\n\t"
11174 "FSTP_S $dst" %}
11175 opcode(0xDB, 0x0); /* DB /0 */
11176 ins_encode( Push_Mem_I(src),
11177 Pop_Mem_FPR(dst));
11178 ins_pipe( fpu_mem_mem );
11179 %}
11181 // In 24-bit mode, force exponent rounding by storing back out
11182 instruct convI2FPR_SSF_mem(stackSlotF dst, memory mem) %{
11183 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11184 match(Set dst (ConvI2F (LoadI mem)));
11185 ins_cost(200);
11186 format %{ "FILD $mem\n\t"
11187 "FSTP_S $dst" %}
11188 opcode(0xDB); /* DB /0 */
11189 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11190 Pop_Mem_FPR(dst));
11191 ins_pipe( fpu_mem_mem );
11192 %}
11194 // This instruction does not round to 24-bits
11195 instruct convI2FPR_reg(regFPR dst, stackSlotI src) %{
11196 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11197 match(Set dst (ConvI2F src));
11198 format %{ "FILD $src\n\t"
11199 "FSTP $dst" %}
11200 opcode(0xDB, 0x0); /* DB /0 */
11201 ins_encode( Push_Mem_I(src),
11202 Pop_Reg_FPR(dst));
11203 ins_pipe( fpu_reg_mem );
11204 %}
11206 // This instruction does not round to 24-bits
11207 instruct convI2FPR_mem(regFPR dst, memory mem) %{
11208 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11209 match(Set dst (ConvI2F (LoadI mem)));
11210 format %{ "FILD $mem\n\t"
11211 "FSTP $dst" %}
11212 opcode(0xDB); /* DB /0 */
11213 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11214 Pop_Reg_FPR(dst));
11215 ins_pipe( fpu_reg_mem );
11216 %}
11218 // Convert an int to a float in xmm; no rounding step needed.
11219 instruct convI2F_reg(regF dst, rRegI src) %{
11220 predicate( UseSSE==1 || UseSSE>=2 && !UseXmmI2F );
11221 match(Set dst (ConvI2F src));
11222 format %{ "CVTSI2SS $dst, $src" %}
11223 ins_encode %{
11224 __ cvtsi2ssl ($dst$$XMMRegister, $src$$Register);
11225 %}
11226 ins_pipe( pipe_slow );
11227 %}
11229 instruct convXI2F_reg(regF dst, rRegI src)
11230 %{
11231 predicate( UseSSE>=2 && UseXmmI2F );
11232 match(Set dst (ConvI2F src));
11234 format %{ "MOVD $dst,$src\n\t"
11235 "CVTDQ2PS $dst,$dst\t# i2f" %}
11236 ins_encode %{
11237 __ movdl($dst$$XMMRegister, $src$$Register);
11238 __ cvtdq2ps($dst$$XMMRegister, $dst$$XMMRegister);
11239 %}
11240 ins_pipe(pipe_slow); // XXX
11241 %}
11243 instruct convI2L_reg( eRegL dst, rRegI src, eFlagsReg cr) %{
11244 match(Set dst (ConvI2L src));
11245 effect(KILL cr);
11246 ins_cost(375);
11247 format %{ "MOV $dst.lo,$src\n\t"
11248 "MOV $dst.hi,$src\n\t"
11249 "SAR $dst.hi,31" %}
11250 ins_encode(convert_int_long(dst,src));
11251 ins_pipe( ialu_reg_reg_long );
11252 %}
11254 // Zero-extend convert int to long
11255 instruct convI2L_reg_zex(eRegL dst, rRegI src, immL_32bits mask, eFlagsReg flags ) %{
11256 match(Set dst (AndL (ConvI2L src) mask) );
11257 effect( KILL flags );
11258 ins_cost(250);
11259 format %{ "MOV $dst.lo,$src\n\t"
11260 "XOR $dst.hi,$dst.hi" %}
11261 opcode(0x33); // XOR
11262 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11263 ins_pipe( ialu_reg_reg_long );
11264 %}
11266 // Zero-extend long
11267 instruct zerox_long(eRegL dst, eRegL src, immL_32bits mask, eFlagsReg flags ) %{
11268 match(Set dst (AndL src mask) );
11269 effect( KILL flags );
11270 ins_cost(250);
11271 format %{ "MOV $dst.lo,$src.lo\n\t"
11272 "XOR $dst.hi,$dst.hi\n\t" %}
11273 opcode(0x33); // XOR
11274 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11275 ins_pipe( ialu_reg_reg_long );
11276 %}
11278 instruct convL2DPR_reg( stackSlotD dst, eRegL src, eFlagsReg cr) %{
11279 predicate (UseSSE<=1);
11280 match(Set dst (ConvL2D src));
11281 effect( KILL cr );
11282 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
11283 "PUSH $src.lo\n\t"
11284 "FILD ST,[ESP + #0]\n\t"
11285 "ADD ESP,8\n\t"
11286 "FSTP_D $dst\t# D-round" %}
11287 opcode(0xDF, 0x5); /* DF /5 */
11288 ins_encode(convert_long_double(src), Pop_Mem_DPR(dst));
11289 ins_pipe( pipe_slow );
11290 %}
11292 instruct convL2D_reg( regD dst, eRegL src, eFlagsReg cr) %{
11293 predicate (UseSSE>=2);
11294 match(Set dst (ConvL2D src));
11295 effect( KILL cr );
11296 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
11297 "PUSH $src.lo\n\t"
11298 "FILD_D [ESP]\n\t"
11299 "FSTP_D [ESP]\n\t"
11300 "MOVSD $dst,[ESP]\n\t"
11301 "ADD ESP,8" %}
11302 opcode(0xDF, 0x5); /* DF /5 */
11303 ins_encode(convert_long_double2(src), Push_ResultD(dst));
11304 ins_pipe( pipe_slow );
11305 %}
11307 instruct convL2F_reg( regF dst, eRegL src, eFlagsReg cr) %{
11308 predicate (UseSSE>=1);
11309 match(Set dst (ConvL2F src));
11310 effect( KILL cr );
11311 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
11312 "PUSH $src.lo\n\t"
11313 "FILD_D [ESP]\n\t"
11314 "FSTP_S [ESP]\n\t"
11315 "MOVSS $dst,[ESP]\n\t"
11316 "ADD ESP,8" %}
11317 opcode(0xDF, 0x5); /* DF /5 */
11318 ins_encode(convert_long_double2(src), Push_ResultF(dst,0x8));
11319 ins_pipe( pipe_slow );
11320 %}
11322 instruct convL2FPR_reg( stackSlotF dst, eRegL src, eFlagsReg cr) %{
11323 match(Set dst (ConvL2F src));
11324 effect( KILL cr );
11325 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
11326 "PUSH $src.lo\n\t"
11327 "FILD ST,[ESP + #0]\n\t"
11328 "ADD ESP,8\n\t"
11329 "FSTP_S $dst\t# F-round" %}
11330 opcode(0xDF, 0x5); /* DF /5 */
11331 ins_encode(convert_long_double(src), Pop_Mem_FPR(dst));
11332 ins_pipe( pipe_slow );
11333 %}
11335 instruct convL2I_reg( rRegI dst, eRegL src ) %{
11336 match(Set dst (ConvL2I src));
11337 effect( DEF dst, USE src );
11338 format %{ "MOV $dst,$src.lo" %}
11339 ins_encode(enc_CopyL_Lo(dst,src));
11340 ins_pipe( ialu_reg_reg );
11341 %}
11344 instruct MoveF2I_stack_reg(rRegI dst, stackSlotF src) %{
11345 match(Set dst (MoveF2I src));
11346 effect( DEF dst, USE src );
11347 ins_cost(100);
11348 format %{ "MOV $dst,$src\t# MoveF2I_stack_reg" %}
11349 ins_encode %{
11350 __ movl($dst$$Register, Address(rsp, $src$$disp));
11351 %}
11352 ins_pipe( ialu_reg_mem );
11353 %}
11355 instruct MoveFPR2I_reg_stack(stackSlotI dst, regFPR src) %{
11356 predicate(UseSSE==0);
11357 match(Set dst (MoveF2I src));
11358 effect( DEF dst, USE src );
11360 ins_cost(125);
11361 format %{ "FST_S $dst,$src\t# MoveF2I_reg_stack" %}
11362 ins_encode( Pop_Mem_Reg_FPR(dst, src) );
11363 ins_pipe( fpu_mem_reg );
11364 %}
11366 instruct MoveF2I_reg_stack_sse(stackSlotI dst, regF src) %{
11367 predicate(UseSSE>=1);
11368 match(Set dst (MoveF2I src));
11369 effect( DEF dst, USE src );
11371 ins_cost(95);
11372 format %{ "MOVSS $dst,$src\t# MoveF2I_reg_stack_sse" %}
11373 ins_encode %{
11374 __ movflt(Address(rsp, $dst$$disp), $src$$XMMRegister);
11375 %}
11376 ins_pipe( pipe_slow );
11377 %}
11379 instruct MoveF2I_reg_reg_sse(rRegI dst, regF src) %{
11380 predicate(UseSSE>=2);
11381 match(Set dst (MoveF2I src));
11382 effect( DEF dst, USE src );
11383 ins_cost(85);
11384 format %{ "MOVD $dst,$src\t# MoveF2I_reg_reg_sse" %}
11385 ins_encode %{
11386 __ movdl($dst$$Register, $src$$XMMRegister);
11387 %}
11388 ins_pipe( pipe_slow );
11389 %}
11391 instruct MoveI2F_reg_stack(stackSlotF dst, rRegI src) %{
11392 match(Set dst (MoveI2F src));
11393 effect( DEF dst, USE src );
11395 ins_cost(100);
11396 format %{ "MOV $dst,$src\t# MoveI2F_reg_stack" %}
11397 ins_encode %{
11398 __ movl(Address(rsp, $dst$$disp), $src$$Register);
11399 %}
11400 ins_pipe( ialu_mem_reg );
11401 %}
11404 instruct MoveI2FPR_stack_reg(regFPR dst, stackSlotI src) %{
11405 predicate(UseSSE==0);
11406 match(Set dst (MoveI2F src));
11407 effect(DEF dst, USE src);
11409 ins_cost(125);
11410 format %{ "FLD_S $src\n\t"
11411 "FSTP $dst\t# MoveI2F_stack_reg" %}
11412 opcode(0xD9); /* D9 /0, FLD m32real */
11413 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
11414 Pop_Reg_FPR(dst) );
11415 ins_pipe( fpu_reg_mem );
11416 %}
11418 instruct MoveI2F_stack_reg_sse(regF dst, stackSlotI src) %{
11419 predicate(UseSSE>=1);
11420 match(Set dst (MoveI2F src));
11421 effect( DEF dst, USE src );
11423 ins_cost(95);
11424 format %{ "MOVSS $dst,$src\t# MoveI2F_stack_reg_sse" %}
11425 ins_encode %{
11426 __ movflt($dst$$XMMRegister, Address(rsp, $src$$disp));
11427 %}
11428 ins_pipe( pipe_slow );
11429 %}
11431 instruct MoveI2F_reg_reg_sse(regF dst, rRegI src) %{
11432 predicate(UseSSE>=2);
11433 match(Set dst (MoveI2F src));
11434 effect( DEF dst, USE src );
11436 ins_cost(85);
11437 format %{ "MOVD $dst,$src\t# MoveI2F_reg_reg_sse" %}
11438 ins_encode %{
11439 __ movdl($dst$$XMMRegister, $src$$Register);
11440 %}
11441 ins_pipe( pipe_slow );
11442 %}
11444 instruct MoveD2L_stack_reg(eRegL dst, stackSlotD src) %{
11445 match(Set dst (MoveD2L src));
11446 effect(DEF dst, USE src);
11448 ins_cost(250);
11449 format %{ "MOV $dst.lo,$src\n\t"
11450 "MOV $dst.hi,$src+4\t# MoveD2L_stack_reg" %}
11451 opcode(0x8B, 0x8B);
11452 ins_encode( OpcP, RegMem(dst,src), OpcS, RegMem_Hi(dst,src));
11453 ins_pipe( ialu_mem_long_reg );
11454 %}
11456 instruct MoveDPR2L_reg_stack(stackSlotL dst, regDPR src) %{
11457 predicate(UseSSE<=1);
11458 match(Set dst (MoveD2L src));
11459 effect(DEF dst, USE src);
11461 ins_cost(125);
11462 format %{ "FST_D $dst,$src\t# MoveD2L_reg_stack" %}
11463 ins_encode( Pop_Mem_Reg_DPR(dst, src) );
11464 ins_pipe( fpu_mem_reg );
11465 %}
11467 instruct MoveD2L_reg_stack_sse(stackSlotL dst, regD src) %{
11468 predicate(UseSSE>=2);
11469 match(Set dst (MoveD2L src));
11470 effect(DEF dst, USE src);
11471 ins_cost(95);
11472 format %{ "MOVSD $dst,$src\t# MoveD2L_reg_stack_sse" %}
11473 ins_encode %{
11474 __ movdbl(Address(rsp, $dst$$disp), $src$$XMMRegister);
11475 %}
11476 ins_pipe( pipe_slow );
11477 %}
11479 instruct MoveD2L_reg_reg_sse(eRegL dst, regD src, regD tmp) %{
11480 predicate(UseSSE>=2);
11481 match(Set dst (MoveD2L src));
11482 effect(DEF dst, USE src, TEMP tmp);
11483 ins_cost(85);
11484 format %{ "MOVD $dst.lo,$src\n\t"
11485 "PSHUFLW $tmp,$src,0x4E\n\t"
11486 "MOVD $dst.hi,$tmp\t# MoveD2L_reg_reg_sse" %}
11487 ins_encode %{
11488 __ movdl($dst$$Register, $src$$XMMRegister);
11489 __ pshuflw($tmp$$XMMRegister, $src$$XMMRegister, 0x4e);
11490 __ movdl(HIGH_FROM_LOW($dst$$Register), $tmp$$XMMRegister);
11491 %}
11492 ins_pipe( pipe_slow );
11493 %}
11495 instruct MoveL2D_reg_stack(stackSlotD dst, eRegL src) %{
11496 match(Set dst (MoveL2D src));
11497 effect(DEF dst, USE src);
11499 ins_cost(200);
11500 format %{ "MOV $dst,$src.lo\n\t"
11501 "MOV $dst+4,$src.hi\t# MoveL2D_reg_stack" %}
11502 opcode(0x89, 0x89);
11503 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
11504 ins_pipe( ialu_mem_long_reg );
11505 %}
11508 instruct MoveL2DPR_stack_reg(regDPR dst, stackSlotL src) %{
11509 predicate(UseSSE<=1);
11510 match(Set dst (MoveL2D src));
11511 effect(DEF dst, USE src);
11512 ins_cost(125);
11514 format %{ "FLD_D $src\n\t"
11515 "FSTP $dst\t# MoveL2D_stack_reg" %}
11516 opcode(0xDD); /* DD /0, FLD m64real */
11517 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
11518 Pop_Reg_DPR(dst) );
11519 ins_pipe( fpu_reg_mem );
11520 %}
11523 instruct MoveL2D_stack_reg_sse(regD dst, stackSlotL src) %{
11524 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
11525 match(Set dst (MoveL2D src));
11526 effect(DEF dst, USE src);
11528 ins_cost(95);
11529 format %{ "MOVSD $dst,$src\t# MoveL2D_stack_reg_sse" %}
11530 ins_encode %{
11531 __ movdbl($dst$$XMMRegister, Address(rsp, $src$$disp));
11532 %}
11533 ins_pipe( pipe_slow );
11534 %}
11536 instruct MoveL2D_stack_reg_sse_partial(regD dst, stackSlotL src) %{
11537 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
11538 match(Set dst (MoveL2D src));
11539 effect(DEF dst, USE src);
11541 ins_cost(95);
11542 format %{ "MOVLPD $dst,$src\t# MoveL2D_stack_reg_sse" %}
11543 ins_encode %{
11544 __ movdbl($dst$$XMMRegister, Address(rsp, $src$$disp));
11545 %}
11546 ins_pipe( pipe_slow );
11547 %}
11549 instruct MoveL2D_reg_reg_sse(regD dst, eRegL src, regD tmp) %{
11550 predicate(UseSSE>=2);
11551 match(Set dst (MoveL2D src));
11552 effect(TEMP dst, USE src, TEMP tmp);
11553 ins_cost(85);
11554 format %{ "MOVD $dst,$src.lo\n\t"
11555 "MOVD $tmp,$src.hi\n\t"
11556 "PUNPCKLDQ $dst,$tmp\t# MoveL2D_reg_reg_sse" %}
11557 ins_encode %{
11558 __ movdl($dst$$XMMRegister, $src$$Register);
11559 __ movdl($tmp$$XMMRegister, HIGH_FROM_LOW($src$$Register));
11560 __ punpckldq($dst$$XMMRegister, $tmp$$XMMRegister);
11561 %}
11562 ins_pipe( pipe_slow );
11563 %}
11566 // =======================================================================
11567 // fast clearing of an array
11568 instruct rep_stos(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
11569 predicate(!UseFastStosb);
11570 match(Set dummy (ClearArray cnt base));
11571 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
11572 format %{ "XOR EAX,EAX\t# ClearArray:\n\t"
11573 "SHL ECX,1\t# Convert doublewords to words\n\t"
11574 "REP STOS\t# store EAX into [EDI++] while ECX--" %}
11575 ins_encode %{
11576 __ clear_mem($base$$Register, $cnt$$Register, $zero$$Register);
11577 %}
11578 ins_pipe( pipe_slow );
11579 %}
11581 instruct rep_fast_stosb(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
11582 predicate(UseFastStosb);
11583 match(Set dummy (ClearArray cnt base));
11584 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
11585 format %{ "XOR EAX,EAX\t# ClearArray:\n\t"
11586 "SHL ECX,3\t# Convert doublewords to bytes\n\t"
11587 "REP STOSB\t# store EAX into [EDI++] while ECX--" %}
11588 ins_encode %{
11589 __ clear_mem($base$$Register, $cnt$$Register, $zero$$Register);
11590 %}
11591 ins_pipe( pipe_slow );
11592 %}
11594 instruct string_compare(eDIRegP str1, eCXRegI cnt1, eSIRegP str2, eDXRegI cnt2,
11595 eAXRegI result, regD tmp1, eFlagsReg cr) %{
11596 match(Set result (StrComp (Binary str1 cnt1) (Binary str2 cnt2)));
11597 effect(TEMP tmp1, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL cr);
11599 format %{ "String Compare $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp1" %}
11600 ins_encode %{
11601 __ string_compare($str1$$Register, $str2$$Register,
11602 $cnt1$$Register, $cnt2$$Register, $result$$Register,
11603 $tmp1$$XMMRegister);
11604 %}
11605 ins_pipe( pipe_slow );
11606 %}
11608 // fast string equals
11609 instruct string_equals(eDIRegP str1, eSIRegP str2, eCXRegI cnt, eAXRegI result,
11610 regD tmp1, regD tmp2, eBXRegI tmp3, eFlagsReg cr) %{
11611 match(Set result (StrEquals (Binary str1 str2) cnt));
11612 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt, KILL tmp3, KILL cr);
11614 format %{ "String Equals $str1,$str2,$cnt -> $result // KILL $tmp1, $tmp2, $tmp3" %}
11615 ins_encode %{
11616 __ char_arrays_equals(false, $str1$$Register, $str2$$Register,
11617 $cnt$$Register, $result$$Register, $tmp3$$Register,
11618 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
11619 %}
11620 ins_pipe( pipe_slow );
11621 %}
11623 // fast search of substring with known size.
11624 instruct string_indexof_con(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, immI int_cnt2,
11625 eBXRegI result, regD vec, eAXRegI cnt2, eCXRegI tmp, eFlagsReg cr) %{
11626 predicate(UseSSE42Intrinsics);
11627 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 int_cnt2)));
11628 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, KILL cnt2, KILL tmp, KILL cr);
11630 format %{ "String IndexOf $str1,$cnt1,$str2,$int_cnt2 -> $result // KILL $vec, $cnt1, $cnt2, $tmp" %}
11631 ins_encode %{
11632 int icnt2 = (int)$int_cnt2$$constant;
11633 if (icnt2 >= 8) {
11634 // IndexOf for constant substrings with size >= 8 elements
11635 // which don't need to be loaded through stack.
11636 __ string_indexofC8($str1$$Register, $str2$$Register,
11637 $cnt1$$Register, $cnt2$$Register,
11638 icnt2, $result$$Register,
11639 $vec$$XMMRegister, $tmp$$Register);
11640 } else {
11641 // Small strings are loaded through stack if they cross page boundary.
11642 __ string_indexof($str1$$Register, $str2$$Register,
11643 $cnt1$$Register, $cnt2$$Register,
11644 icnt2, $result$$Register,
11645 $vec$$XMMRegister, $tmp$$Register);
11646 }
11647 %}
11648 ins_pipe( pipe_slow );
11649 %}
11651 instruct string_indexof(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, eAXRegI cnt2,
11652 eBXRegI result, regD vec, eCXRegI tmp, eFlagsReg cr) %{
11653 predicate(UseSSE42Intrinsics);
11654 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 cnt2)));
11655 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL tmp, KILL cr);
11657 format %{ "String IndexOf $str1,$cnt1,$str2,$cnt2 -> $result // KILL all" %}
11658 ins_encode %{
11659 __ string_indexof($str1$$Register, $str2$$Register,
11660 $cnt1$$Register, $cnt2$$Register,
11661 (-1), $result$$Register,
11662 $vec$$XMMRegister, $tmp$$Register);
11663 %}
11664 ins_pipe( pipe_slow );
11665 %}
11667 // fast array equals
11668 instruct array_equals(eDIRegP ary1, eSIRegP ary2, eAXRegI result,
11669 regD tmp1, regD tmp2, eCXRegI tmp3, eBXRegI tmp4, eFlagsReg cr)
11670 %{
11671 match(Set result (AryEq ary1 ary2));
11672 effect(TEMP tmp1, TEMP tmp2, USE_KILL ary1, USE_KILL ary2, KILL tmp3, KILL tmp4, KILL cr);
11673 //ins_cost(300);
11675 format %{ "Array Equals $ary1,$ary2 -> $result // KILL $tmp1, $tmp2, $tmp3, $tmp4" %}
11676 ins_encode %{
11677 __ char_arrays_equals(true, $ary1$$Register, $ary2$$Register,
11678 $tmp3$$Register, $result$$Register, $tmp4$$Register,
11679 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
11680 %}
11681 ins_pipe( pipe_slow );
11682 %}
11684 // encode char[] to byte[] in ISO_8859_1
11685 instruct encode_iso_array(eSIRegP src, eDIRegP dst, eDXRegI len,
11686 regD tmp1, regD tmp2, regD tmp3, regD tmp4,
11687 eCXRegI tmp5, eAXRegI result, eFlagsReg cr) %{
11688 match(Set result (EncodeISOArray src (Binary dst len)));
11689 effect(TEMP tmp1, TEMP tmp2, TEMP tmp3, TEMP tmp4, USE_KILL src, USE_KILL dst, USE_KILL len, KILL tmp5, KILL cr);
11691 format %{ "Encode array $src,$dst,$len -> $result // KILL ECX, EDX, $tmp1, $tmp2, $tmp3, $tmp4, ESI, EDI " %}
11692 ins_encode %{
11693 __ encode_iso_array($src$$Register, $dst$$Register, $len$$Register,
11694 $tmp1$$XMMRegister, $tmp2$$XMMRegister, $tmp3$$XMMRegister,
11695 $tmp4$$XMMRegister, $tmp5$$Register, $result$$Register);
11696 %}
11697 ins_pipe( pipe_slow );
11698 %}
11701 //----------Control Flow Instructions------------------------------------------
11702 // Signed compare Instructions
11703 instruct compI_eReg(eFlagsReg cr, rRegI op1, rRegI op2) %{
11704 match(Set cr (CmpI op1 op2));
11705 effect( DEF cr, USE op1, USE op2 );
11706 format %{ "CMP $op1,$op2" %}
11707 opcode(0x3B); /* Opcode 3B /r */
11708 ins_encode( OpcP, RegReg( op1, op2) );
11709 ins_pipe( ialu_cr_reg_reg );
11710 %}
11712 instruct compI_eReg_imm(eFlagsReg cr, rRegI op1, immI op2) %{
11713 match(Set cr (CmpI op1 op2));
11714 effect( DEF cr, USE op1 );
11715 format %{ "CMP $op1,$op2" %}
11716 opcode(0x81,0x07); /* Opcode 81 /7 */
11717 // ins_encode( RegImm( op1, op2) ); /* Was CmpImm */
11718 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11719 ins_pipe( ialu_cr_reg_imm );
11720 %}
11722 // Cisc-spilled version of cmpI_eReg
11723 instruct compI_eReg_mem(eFlagsReg cr, rRegI op1, memory op2) %{
11724 match(Set cr (CmpI op1 (LoadI op2)));
11726 format %{ "CMP $op1,$op2" %}
11727 ins_cost(500);
11728 opcode(0x3B); /* Opcode 3B /r */
11729 ins_encode( OpcP, RegMem( op1, op2) );
11730 ins_pipe( ialu_cr_reg_mem );
11731 %}
11733 instruct testI_reg( eFlagsReg cr, rRegI src, immI0 zero ) %{
11734 match(Set cr (CmpI src zero));
11735 effect( DEF cr, USE src );
11737 format %{ "TEST $src,$src" %}
11738 opcode(0x85);
11739 ins_encode( OpcP, RegReg( src, src ) );
11740 ins_pipe( ialu_cr_reg_imm );
11741 %}
11743 instruct testI_reg_imm( eFlagsReg cr, rRegI src, immI con, immI0 zero ) %{
11744 match(Set cr (CmpI (AndI src con) zero));
11746 format %{ "TEST $src,$con" %}
11747 opcode(0xF7,0x00);
11748 ins_encode( OpcP, RegOpc(src), Con32(con) );
11749 ins_pipe( ialu_cr_reg_imm );
11750 %}
11752 instruct testI_reg_mem( eFlagsReg cr, rRegI src, memory mem, immI0 zero ) %{
11753 match(Set cr (CmpI (AndI src mem) zero));
11755 format %{ "TEST $src,$mem" %}
11756 opcode(0x85);
11757 ins_encode( OpcP, RegMem( src, mem ) );
11758 ins_pipe( ialu_cr_reg_mem );
11759 %}
11761 // Unsigned compare Instructions; really, same as signed except they
11762 // produce an eFlagsRegU instead of eFlagsReg.
11763 instruct compU_eReg(eFlagsRegU cr, rRegI op1, rRegI op2) %{
11764 match(Set cr (CmpU op1 op2));
11766 format %{ "CMPu $op1,$op2" %}
11767 opcode(0x3B); /* Opcode 3B /r */
11768 ins_encode( OpcP, RegReg( op1, op2) );
11769 ins_pipe( ialu_cr_reg_reg );
11770 %}
11772 instruct compU_eReg_imm(eFlagsRegU cr, rRegI op1, immI op2) %{
11773 match(Set cr (CmpU op1 op2));
11775 format %{ "CMPu $op1,$op2" %}
11776 opcode(0x81,0x07); /* Opcode 81 /7 */
11777 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11778 ins_pipe( ialu_cr_reg_imm );
11779 %}
11781 // // Cisc-spilled version of cmpU_eReg
11782 instruct compU_eReg_mem(eFlagsRegU cr, rRegI op1, memory op2) %{
11783 match(Set cr (CmpU op1 (LoadI op2)));
11785 format %{ "CMPu $op1,$op2" %}
11786 ins_cost(500);
11787 opcode(0x3B); /* Opcode 3B /r */
11788 ins_encode( OpcP, RegMem( op1, op2) );
11789 ins_pipe( ialu_cr_reg_mem );
11790 %}
11792 // // Cisc-spilled version of cmpU_eReg
11793 //instruct compU_mem_eReg(eFlagsRegU cr, memory op1, rRegI op2) %{
11794 // match(Set cr (CmpU (LoadI op1) op2));
11795 //
11796 // format %{ "CMPu $op1,$op2" %}
11797 // ins_cost(500);
11798 // opcode(0x39); /* Opcode 39 /r */
11799 // ins_encode( OpcP, RegMem( op1, op2) );
11800 //%}
11802 instruct testU_reg( eFlagsRegU cr, rRegI src, immI0 zero ) %{
11803 match(Set cr (CmpU src zero));
11805 format %{ "TESTu $src,$src" %}
11806 opcode(0x85);
11807 ins_encode( OpcP, RegReg( src, src ) );
11808 ins_pipe( ialu_cr_reg_imm );
11809 %}
11811 // Unsigned pointer compare Instructions
11812 instruct compP_eReg(eFlagsRegU cr, eRegP op1, eRegP op2) %{
11813 match(Set cr (CmpP op1 op2));
11815 format %{ "CMPu $op1,$op2" %}
11816 opcode(0x3B); /* Opcode 3B /r */
11817 ins_encode( OpcP, RegReg( op1, op2) );
11818 ins_pipe( ialu_cr_reg_reg );
11819 %}
11821 instruct compP_eReg_imm(eFlagsRegU cr, eRegP op1, immP op2) %{
11822 match(Set cr (CmpP op1 op2));
11824 format %{ "CMPu $op1,$op2" %}
11825 opcode(0x81,0x07); /* Opcode 81 /7 */
11826 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11827 ins_pipe( ialu_cr_reg_imm );
11828 %}
11830 // // Cisc-spilled version of cmpP_eReg
11831 instruct compP_eReg_mem(eFlagsRegU cr, eRegP op1, memory op2) %{
11832 match(Set cr (CmpP op1 (LoadP op2)));
11834 format %{ "CMPu $op1,$op2" %}
11835 ins_cost(500);
11836 opcode(0x3B); /* Opcode 3B /r */
11837 ins_encode( OpcP, RegMem( op1, op2) );
11838 ins_pipe( ialu_cr_reg_mem );
11839 %}
11841 // // Cisc-spilled version of cmpP_eReg
11842 //instruct compP_mem_eReg(eFlagsRegU cr, memory op1, eRegP op2) %{
11843 // match(Set cr (CmpP (LoadP op1) op2));
11844 //
11845 // format %{ "CMPu $op1,$op2" %}
11846 // ins_cost(500);
11847 // opcode(0x39); /* Opcode 39 /r */
11848 // ins_encode( OpcP, RegMem( op1, op2) );
11849 //%}
11851 // Compare raw pointer (used in out-of-heap check).
11852 // Only works because non-oop pointers must be raw pointers
11853 // and raw pointers have no anti-dependencies.
11854 instruct compP_mem_eReg( eFlagsRegU cr, eRegP op1, memory op2 ) %{
11855 predicate( n->in(2)->in(2)->bottom_type()->reloc() == relocInfo::none );
11856 match(Set cr (CmpP op1 (LoadP op2)));
11858 format %{ "CMPu $op1,$op2" %}
11859 opcode(0x3B); /* Opcode 3B /r */
11860 ins_encode( OpcP, RegMem( op1, op2) );
11861 ins_pipe( ialu_cr_reg_mem );
11862 %}
11864 //
11865 // This will generate a signed flags result. This should be ok
11866 // since any compare to a zero should be eq/neq.
11867 instruct testP_reg( eFlagsReg cr, eRegP src, immP0 zero ) %{
11868 match(Set cr (CmpP src zero));
11870 format %{ "TEST $src,$src" %}
11871 opcode(0x85);
11872 ins_encode( OpcP, RegReg( src, src ) );
11873 ins_pipe( ialu_cr_reg_imm );
11874 %}
11876 // Cisc-spilled version of testP_reg
11877 // This will generate a signed flags result. This should be ok
11878 // since any compare to a zero should be eq/neq.
11879 instruct testP_Reg_mem( eFlagsReg cr, memory op, immI0 zero ) %{
11880 match(Set cr (CmpP (LoadP op) zero));
11882 format %{ "TEST $op,0xFFFFFFFF" %}
11883 ins_cost(500);
11884 opcode(0xF7); /* Opcode F7 /0 */
11885 ins_encode( OpcP, RMopc_Mem(0x00,op), Con_d32(0xFFFFFFFF) );
11886 ins_pipe( ialu_cr_reg_imm );
11887 %}
11889 // Yanked all unsigned pointer compare operations.
11890 // Pointer compares are done with CmpP which is already unsigned.
11892 //----------Max and Min--------------------------------------------------------
11893 // Min Instructions
11894 ////
11895 // *** Min and Max using the conditional move are slower than the
11896 // *** branch version on a Pentium III.
11897 // // Conditional move for min
11898 //instruct cmovI_reg_lt( rRegI op2, rRegI op1, eFlagsReg cr ) %{
11899 // effect( USE_DEF op2, USE op1, USE cr );
11900 // format %{ "CMOVlt $op2,$op1\t! min" %}
11901 // opcode(0x4C,0x0F);
11902 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
11903 // ins_pipe( pipe_cmov_reg );
11904 //%}
11905 //
11906 //// Min Register with Register (P6 version)
11907 //instruct minI_eReg_p6( rRegI op1, rRegI op2 ) %{
11908 // predicate(VM_Version::supports_cmov() );
11909 // match(Set op2 (MinI op1 op2));
11910 // ins_cost(200);
11911 // expand %{
11912 // eFlagsReg cr;
11913 // compI_eReg(cr,op1,op2);
11914 // cmovI_reg_lt(op2,op1,cr);
11915 // %}
11916 //%}
11918 // Min Register with Register (generic version)
11919 instruct minI_eReg(rRegI dst, rRegI src, eFlagsReg flags) %{
11920 match(Set dst (MinI dst src));
11921 effect(KILL flags);
11922 ins_cost(300);
11924 format %{ "MIN $dst,$src" %}
11925 opcode(0xCC);
11926 ins_encode( min_enc(dst,src) );
11927 ins_pipe( pipe_slow );
11928 %}
11930 // Max Register with Register
11931 // *** Min and Max using the conditional move are slower than the
11932 // *** branch version on a Pentium III.
11933 // // Conditional move for max
11934 //instruct cmovI_reg_gt( rRegI op2, rRegI op1, eFlagsReg cr ) %{
11935 // effect( USE_DEF op2, USE op1, USE cr );
11936 // format %{ "CMOVgt $op2,$op1\t! max" %}
11937 // opcode(0x4F,0x0F);
11938 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
11939 // ins_pipe( pipe_cmov_reg );
11940 //%}
11941 //
11942 // // Max Register with Register (P6 version)
11943 //instruct maxI_eReg_p6( rRegI op1, rRegI op2 ) %{
11944 // predicate(VM_Version::supports_cmov() );
11945 // match(Set op2 (MaxI op1 op2));
11946 // ins_cost(200);
11947 // expand %{
11948 // eFlagsReg cr;
11949 // compI_eReg(cr,op1,op2);
11950 // cmovI_reg_gt(op2,op1,cr);
11951 // %}
11952 //%}
11954 // Max Register with Register (generic version)
11955 instruct maxI_eReg(rRegI dst, rRegI src, eFlagsReg flags) %{
11956 match(Set dst (MaxI dst src));
11957 effect(KILL flags);
11958 ins_cost(300);
11960 format %{ "MAX $dst,$src" %}
11961 opcode(0xCC);
11962 ins_encode( max_enc(dst,src) );
11963 ins_pipe( pipe_slow );
11964 %}
11966 // ============================================================================
11967 // Counted Loop limit node which represents exact final iterator value.
11968 // Note: the resulting value should fit into integer range since
11969 // counted loops have limit check on overflow.
11970 instruct loopLimit_eReg(eAXRegI limit, nadxRegI init, immI stride, eDXRegI limit_hi, nadxRegI tmp, eFlagsReg flags) %{
11971 match(Set limit (LoopLimit (Binary init limit) stride));
11972 effect(TEMP limit_hi, TEMP tmp, KILL flags);
11973 ins_cost(300);
11975 format %{ "loopLimit $init,$limit,$stride # $limit = $init + $stride *( $limit - $init + $stride -1)/ $stride, kills $limit_hi" %}
11976 ins_encode %{
11977 int strd = (int)$stride$$constant;
11978 assert(strd != 1 && strd != -1, "sanity");
11979 int m1 = (strd > 0) ? 1 : -1;
11980 // Convert limit to long (EAX:EDX)
11981 __ cdql();
11982 // Convert init to long (init:tmp)
11983 __ movl($tmp$$Register, $init$$Register);
11984 __ sarl($tmp$$Register, 31);
11985 // $limit - $init
11986 __ subl($limit$$Register, $init$$Register);
11987 __ sbbl($limit_hi$$Register, $tmp$$Register);
11988 // + ($stride - 1)
11989 if (strd > 0) {
11990 __ addl($limit$$Register, (strd - 1));
11991 __ adcl($limit_hi$$Register, 0);
11992 __ movl($tmp$$Register, strd);
11993 } else {
11994 __ addl($limit$$Register, (strd + 1));
11995 __ adcl($limit_hi$$Register, -1);
11996 __ lneg($limit_hi$$Register, $limit$$Register);
11997 __ movl($tmp$$Register, -strd);
11998 }
11999 // signed devision: (EAX:EDX) / pos_stride
12000 __ idivl($tmp$$Register);
12001 if (strd < 0) {
12002 // restore sign
12003 __ negl($tmp$$Register);
12004 }
12005 // (EAX) * stride
12006 __ mull($tmp$$Register);
12007 // + init (ignore upper bits)
12008 __ addl($limit$$Register, $init$$Register);
12009 %}
12010 ins_pipe( pipe_slow );
12011 %}
12013 // ============================================================================
12014 // Branch Instructions
12015 // Jump Table
12016 instruct jumpXtnd(rRegI switch_val) %{
12017 match(Jump switch_val);
12018 ins_cost(350);
12019 format %{ "JMP [$constantaddress](,$switch_val,1)\n\t" %}
12020 ins_encode %{
12021 // Jump to Address(table_base + switch_reg)
12022 Address index(noreg, $switch_val$$Register, Address::times_1);
12023 __ jump(ArrayAddress($constantaddress, index));
12024 %}
12025 ins_pipe(pipe_jmp);
12026 %}
12028 // Jump Direct - Label defines a relative address from JMP+1
12029 instruct jmpDir(label labl) %{
12030 match(Goto);
12031 effect(USE labl);
12033 ins_cost(300);
12034 format %{ "JMP $labl" %}
12035 size(5);
12036 ins_encode %{
12037 Label* L = $labl$$label;
12038 __ jmp(*L, false); // Always long jump
12039 %}
12040 ins_pipe( pipe_jmp );
12041 %}
12043 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12044 instruct jmpCon(cmpOp cop, eFlagsReg cr, label labl) %{
12045 match(If cop cr);
12046 effect(USE labl);
12048 ins_cost(300);
12049 format %{ "J$cop $labl" %}
12050 size(6);
12051 ins_encode %{
12052 Label* L = $labl$$label;
12053 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12054 %}
12055 ins_pipe( pipe_jcc );
12056 %}
12058 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12059 instruct jmpLoopEnd(cmpOp cop, eFlagsReg cr, label labl) %{
12060 match(CountedLoopEnd cop cr);
12061 effect(USE labl);
12063 ins_cost(300);
12064 format %{ "J$cop $labl\t# Loop end" %}
12065 size(6);
12066 ins_encode %{
12067 Label* L = $labl$$label;
12068 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12069 %}
12070 ins_pipe( pipe_jcc );
12071 %}
12073 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12074 instruct jmpLoopEndU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12075 match(CountedLoopEnd cop cmp);
12076 effect(USE labl);
12078 ins_cost(300);
12079 format %{ "J$cop,u $labl\t# Loop end" %}
12080 size(6);
12081 ins_encode %{
12082 Label* L = $labl$$label;
12083 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12084 %}
12085 ins_pipe( pipe_jcc );
12086 %}
12088 instruct jmpLoopEndUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12089 match(CountedLoopEnd cop cmp);
12090 effect(USE labl);
12092 ins_cost(200);
12093 format %{ "J$cop,u $labl\t# Loop end" %}
12094 size(6);
12095 ins_encode %{
12096 Label* L = $labl$$label;
12097 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12098 %}
12099 ins_pipe( pipe_jcc );
12100 %}
12102 // Jump Direct Conditional - using unsigned comparison
12103 instruct jmpConU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12104 match(If cop cmp);
12105 effect(USE labl);
12107 ins_cost(300);
12108 format %{ "J$cop,u $labl" %}
12109 size(6);
12110 ins_encode %{
12111 Label* L = $labl$$label;
12112 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12113 %}
12114 ins_pipe(pipe_jcc);
12115 %}
12117 instruct jmpConUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12118 match(If cop cmp);
12119 effect(USE labl);
12121 ins_cost(200);
12122 format %{ "J$cop,u $labl" %}
12123 size(6);
12124 ins_encode %{
12125 Label* L = $labl$$label;
12126 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12127 %}
12128 ins_pipe(pipe_jcc);
12129 %}
12131 instruct jmpConUCF2(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
12132 match(If cop cmp);
12133 effect(USE labl);
12135 ins_cost(200);
12136 format %{ $$template
12137 if ($cop$$cmpcode == Assembler::notEqual) {
12138 $$emit$$"JP,u $labl\n\t"
12139 $$emit$$"J$cop,u $labl"
12140 } else {
12141 $$emit$$"JP,u done\n\t"
12142 $$emit$$"J$cop,u $labl\n\t"
12143 $$emit$$"done:"
12144 }
12145 %}
12146 ins_encode %{
12147 Label* l = $labl$$label;
12148 if ($cop$$cmpcode == Assembler::notEqual) {
12149 __ jcc(Assembler::parity, *l, false);
12150 __ jcc(Assembler::notEqual, *l, false);
12151 } else if ($cop$$cmpcode == Assembler::equal) {
12152 Label done;
12153 __ jccb(Assembler::parity, done);
12154 __ jcc(Assembler::equal, *l, false);
12155 __ bind(done);
12156 } else {
12157 ShouldNotReachHere();
12158 }
12159 %}
12160 ins_pipe(pipe_jcc);
12161 %}
12163 // ============================================================================
12164 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass
12165 // array for an instance of the superklass. Set a hidden internal cache on a
12166 // hit (cache is checked with exposed code in gen_subtype_check()). Return
12167 // NZ for a miss or zero for a hit. The encoding ALSO sets flags.
12168 instruct partialSubtypeCheck( eDIRegP result, eSIRegP sub, eAXRegP super, eCXRegI rcx, eFlagsReg cr ) %{
12169 match(Set result (PartialSubtypeCheck sub super));
12170 effect( KILL rcx, KILL cr );
12172 ins_cost(1100); // slightly larger than the next version
12173 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12174 "MOV ECX,[EDI+ArrayKlass::length]\t# length to scan\n\t"
12175 "ADD EDI,ArrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12176 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12177 "JNE,s miss\t\t# Missed: EDI not-zero\n\t"
12178 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache\n\t"
12179 "XOR $result,$result\t\t Hit: EDI zero\n\t"
12180 "miss:\t" %}
12182 opcode(0x1); // Force a XOR of EDI
12183 ins_encode( enc_PartialSubtypeCheck() );
12184 ins_pipe( pipe_slow );
12185 %}
12187 instruct partialSubtypeCheck_vs_Zero( eFlagsReg cr, eSIRegP sub, eAXRegP super, eCXRegI rcx, eDIRegP result, immP0 zero ) %{
12188 match(Set cr (CmpP (PartialSubtypeCheck sub super) zero));
12189 effect( KILL rcx, KILL result );
12191 ins_cost(1000);
12192 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12193 "MOV ECX,[EDI+ArrayKlass::length]\t# length to scan\n\t"
12194 "ADD EDI,ArrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12195 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12196 "JNE,s miss\t\t# Missed: flags NZ\n\t"
12197 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache, flags Z\n\t"
12198 "miss:\t" %}
12200 opcode(0x0); // No need to XOR EDI
12201 ins_encode( enc_PartialSubtypeCheck() );
12202 ins_pipe( pipe_slow );
12203 %}
12205 // ============================================================================
12206 // Branch Instructions -- short offset versions
12207 //
12208 // These instructions are used to replace jumps of a long offset (the default
12209 // match) with jumps of a shorter offset. These instructions are all tagged
12210 // with the ins_short_branch attribute, which causes the ADLC to suppress the
12211 // match rules in general matching. Instead, the ADLC generates a conversion
12212 // method in the MachNode which can be used to do in-place replacement of the
12213 // long variant with the shorter variant. The compiler will determine if a
12214 // branch can be taken by the is_short_branch_offset() predicate in the machine
12215 // specific code section of the file.
12217 // Jump Direct - Label defines a relative address from JMP+1
12218 instruct jmpDir_short(label labl) %{
12219 match(Goto);
12220 effect(USE labl);
12222 ins_cost(300);
12223 format %{ "JMP,s $labl" %}
12224 size(2);
12225 ins_encode %{
12226 Label* L = $labl$$label;
12227 __ jmpb(*L);
12228 %}
12229 ins_pipe( pipe_jmp );
12230 ins_short_branch(1);
12231 %}
12233 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12234 instruct jmpCon_short(cmpOp cop, eFlagsReg cr, label labl) %{
12235 match(If cop cr);
12236 effect(USE labl);
12238 ins_cost(300);
12239 format %{ "J$cop,s $labl" %}
12240 size(2);
12241 ins_encode %{
12242 Label* L = $labl$$label;
12243 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12244 %}
12245 ins_pipe( pipe_jcc );
12246 ins_short_branch(1);
12247 %}
12249 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12250 instruct jmpLoopEnd_short(cmpOp cop, eFlagsReg cr, label labl) %{
12251 match(CountedLoopEnd cop cr);
12252 effect(USE labl);
12254 ins_cost(300);
12255 format %{ "J$cop,s $labl\t# Loop end" %}
12256 size(2);
12257 ins_encode %{
12258 Label* L = $labl$$label;
12259 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12260 %}
12261 ins_pipe( pipe_jcc );
12262 ins_short_branch(1);
12263 %}
12265 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12266 instruct jmpLoopEndU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12267 match(CountedLoopEnd cop cmp);
12268 effect(USE labl);
12270 ins_cost(300);
12271 format %{ "J$cop,us $labl\t# Loop end" %}
12272 size(2);
12273 ins_encode %{
12274 Label* L = $labl$$label;
12275 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12276 %}
12277 ins_pipe( pipe_jcc );
12278 ins_short_branch(1);
12279 %}
12281 instruct jmpLoopEndUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12282 match(CountedLoopEnd cop cmp);
12283 effect(USE labl);
12285 ins_cost(300);
12286 format %{ "J$cop,us $labl\t# Loop end" %}
12287 size(2);
12288 ins_encode %{
12289 Label* L = $labl$$label;
12290 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12291 %}
12292 ins_pipe( pipe_jcc );
12293 ins_short_branch(1);
12294 %}
12296 // Jump Direct Conditional - using unsigned comparison
12297 instruct jmpConU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12298 match(If cop cmp);
12299 effect(USE labl);
12301 ins_cost(300);
12302 format %{ "J$cop,us $labl" %}
12303 size(2);
12304 ins_encode %{
12305 Label* L = $labl$$label;
12306 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12307 %}
12308 ins_pipe( pipe_jcc );
12309 ins_short_branch(1);
12310 %}
12312 instruct jmpConUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12313 match(If cop cmp);
12314 effect(USE labl);
12316 ins_cost(300);
12317 format %{ "J$cop,us $labl" %}
12318 size(2);
12319 ins_encode %{
12320 Label* L = $labl$$label;
12321 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12322 %}
12323 ins_pipe( pipe_jcc );
12324 ins_short_branch(1);
12325 %}
12327 instruct jmpConUCF2_short(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
12328 match(If cop cmp);
12329 effect(USE labl);
12331 ins_cost(300);
12332 format %{ $$template
12333 if ($cop$$cmpcode == Assembler::notEqual) {
12334 $$emit$$"JP,u,s $labl\n\t"
12335 $$emit$$"J$cop,u,s $labl"
12336 } else {
12337 $$emit$$"JP,u,s done\n\t"
12338 $$emit$$"J$cop,u,s $labl\n\t"
12339 $$emit$$"done:"
12340 }
12341 %}
12342 size(4);
12343 ins_encode %{
12344 Label* l = $labl$$label;
12345 if ($cop$$cmpcode == Assembler::notEqual) {
12346 __ jccb(Assembler::parity, *l);
12347 __ jccb(Assembler::notEqual, *l);
12348 } else if ($cop$$cmpcode == Assembler::equal) {
12349 Label done;
12350 __ jccb(Assembler::parity, done);
12351 __ jccb(Assembler::equal, *l);
12352 __ bind(done);
12353 } else {
12354 ShouldNotReachHere();
12355 }
12356 %}
12357 ins_pipe(pipe_jcc);
12358 ins_short_branch(1);
12359 %}
12361 // ============================================================================
12362 // Long Compare
12363 //
12364 // Currently we hold longs in 2 registers. Comparing such values efficiently
12365 // is tricky. The flavor of compare used depends on whether we are testing
12366 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit.
12367 // The GE test is the negated LT test. The LE test can be had by commuting
12368 // the operands (yielding a GE test) and then negating; negate again for the
12369 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the
12370 // NE test is negated from that.
12372 // Due to a shortcoming in the ADLC, it mixes up expressions like:
12373 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the
12374 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections
12375 // are collapsed internally in the ADLC's dfa-gen code. The match for
12376 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the
12377 // foo match ends up with the wrong leaf. One fix is to not match both
12378 // reg-reg and reg-zero forms of long-compare. This is unfortunate because
12379 // both forms beat the trinary form of long-compare and both are very useful
12380 // on Intel which has so few registers.
12382 // Manifest a CmpL result in an integer register. Very painful.
12383 // This is the test to avoid.
12384 instruct cmpL3_reg_reg(eSIRegI dst, eRegL src1, eRegL src2, eFlagsReg flags ) %{
12385 match(Set dst (CmpL3 src1 src2));
12386 effect( KILL flags );
12387 ins_cost(1000);
12388 format %{ "XOR $dst,$dst\n\t"
12389 "CMP $src1.hi,$src2.hi\n\t"
12390 "JLT,s m_one\n\t"
12391 "JGT,s p_one\n\t"
12392 "CMP $src1.lo,$src2.lo\n\t"
12393 "JB,s m_one\n\t"
12394 "JEQ,s done\n"
12395 "p_one:\tINC $dst\n\t"
12396 "JMP,s done\n"
12397 "m_one:\tDEC $dst\n"
12398 "done:" %}
12399 ins_encode %{
12400 Label p_one, m_one, done;
12401 __ xorptr($dst$$Register, $dst$$Register);
12402 __ cmpl(HIGH_FROM_LOW($src1$$Register), HIGH_FROM_LOW($src2$$Register));
12403 __ jccb(Assembler::less, m_one);
12404 __ jccb(Assembler::greater, p_one);
12405 __ cmpl($src1$$Register, $src2$$Register);
12406 __ jccb(Assembler::below, m_one);
12407 __ jccb(Assembler::equal, done);
12408 __ bind(p_one);
12409 __ incrementl($dst$$Register);
12410 __ jmpb(done);
12411 __ bind(m_one);
12412 __ decrementl($dst$$Register);
12413 __ bind(done);
12414 %}
12415 ins_pipe( pipe_slow );
12416 %}
12418 //======
12419 // Manifest a CmpL result in the normal flags. Only good for LT or GE
12420 // compares. Can be used for LE or GT compares by reversing arguments.
12421 // NOT GOOD FOR EQ/NE tests.
12422 instruct cmpL_zero_flags_LTGE( flagsReg_long_LTGE flags, eRegL src, immL0 zero ) %{
12423 match( Set flags (CmpL src zero ));
12424 ins_cost(100);
12425 format %{ "TEST $src.hi,$src.hi" %}
12426 opcode(0x85);
12427 ins_encode( OpcP, RegReg_Hi2( src, src ) );
12428 ins_pipe( ialu_cr_reg_reg );
12429 %}
12431 // Manifest a CmpL result in the normal flags. Only good for LT or GE
12432 // compares. Can be used for LE or GT compares by reversing arguments.
12433 // NOT GOOD FOR EQ/NE tests.
12434 instruct cmpL_reg_flags_LTGE( flagsReg_long_LTGE flags, eRegL src1, eRegL src2, rRegI tmp ) %{
12435 match( Set flags (CmpL src1 src2 ));
12436 effect( TEMP tmp );
12437 ins_cost(300);
12438 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
12439 "MOV $tmp,$src1.hi\n\t"
12440 "SBB $tmp,$src2.hi\t! Compute flags for long compare" %}
12441 ins_encode( long_cmp_flags2( src1, src2, tmp ) );
12442 ins_pipe( ialu_cr_reg_reg );
12443 %}
12445 // Long compares reg < zero/req OR reg >= zero/req.
12446 // Just a wrapper for a normal branch, plus the predicate test.
12447 instruct cmpL_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, label labl) %{
12448 match(If cmp flags);
12449 effect(USE labl);
12450 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12451 expand %{
12452 jmpCon(cmp,flags,labl); // JLT or JGE...
12453 %}
12454 %}
12456 // Compare 2 longs and CMOVE longs.
12457 instruct cmovLL_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, eRegL src) %{
12458 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12459 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12460 ins_cost(400);
12461 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12462 "CMOV$cmp $dst.hi,$src.hi" %}
12463 opcode(0x0F,0x40);
12464 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12465 ins_pipe( pipe_cmov_reg_long );
12466 %}
12468 instruct cmovLL_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, load_long_memory src) %{
12469 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12470 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12471 ins_cost(500);
12472 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12473 "CMOV$cmp $dst.hi,$src.hi" %}
12474 opcode(0x0F,0x40);
12475 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12476 ins_pipe( pipe_cmov_reg_long );
12477 %}
12479 // Compare 2 longs and CMOVE ints.
12480 instruct cmovII_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, rRegI dst, rRegI src) %{
12481 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12482 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12483 ins_cost(200);
12484 format %{ "CMOV$cmp $dst,$src" %}
12485 opcode(0x0F,0x40);
12486 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12487 ins_pipe( pipe_cmov_reg );
12488 %}
12490 instruct cmovII_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, rRegI dst, memory src) %{
12491 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12492 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12493 ins_cost(250);
12494 format %{ "CMOV$cmp $dst,$src" %}
12495 opcode(0x0F,0x40);
12496 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12497 ins_pipe( pipe_cmov_mem );
12498 %}
12500 // Compare 2 longs and CMOVE ints.
12501 instruct cmovPP_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegP dst, eRegP src) %{
12502 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12503 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12504 ins_cost(200);
12505 format %{ "CMOV$cmp $dst,$src" %}
12506 opcode(0x0F,0x40);
12507 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12508 ins_pipe( pipe_cmov_reg );
12509 %}
12511 // Compare 2 longs and CMOVE doubles
12512 instruct cmovDDPR_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regDPR dst, regDPR src) %{
12513 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12514 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12515 ins_cost(200);
12516 expand %{
12517 fcmovDPR_regS(cmp,flags,dst,src);
12518 %}
12519 %}
12521 // Compare 2 longs and CMOVE doubles
12522 instruct cmovDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regD dst, regD src) %{
12523 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12524 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12525 ins_cost(200);
12526 expand %{
12527 fcmovD_regS(cmp,flags,dst,src);
12528 %}
12529 %}
12531 instruct cmovFFPR_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regFPR dst, regFPR src) %{
12532 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12533 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12534 ins_cost(200);
12535 expand %{
12536 fcmovFPR_regS(cmp,flags,dst,src);
12537 %}
12538 %}
12540 instruct cmovFF_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regF dst, regF src) %{
12541 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12542 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12543 ins_cost(200);
12544 expand %{
12545 fcmovF_regS(cmp,flags,dst,src);
12546 %}
12547 %}
12549 //======
12550 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
12551 instruct cmpL_zero_flags_EQNE( flagsReg_long_EQNE flags, eRegL src, immL0 zero, rRegI tmp ) %{
12552 match( Set flags (CmpL src zero ));
12553 effect(TEMP tmp);
12554 ins_cost(200);
12555 format %{ "MOV $tmp,$src.lo\n\t"
12556 "OR $tmp,$src.hi\t! Long is EQ/NE 0?" %}
12557 ins_encode( long_cmp_flags0( src, tmp ) );
12558 ins_pipe( ialu_reg_reg_long );
12559 %}
12561 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
12562 instruct cmpL_reg_flags_EQNE( flagsReg_long_EQNE flags, eRegL src1, eRegL src2 ) %{
12563 match( Set flags (CmpL src1 src2 ));
12564 ins_cost(200+300);
12565 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
12566 "JNE,s skip\n\t"
12567 "CMP $src1.hi,$src2.hi\n\t"
12568 "skip:\t" %}
12569 ins_encode( long_cmp_flags1( src1, src2 ) );
12570 ins_pipe( ialu_cr_reg_reg );
12571 %}
12573 // Long compare reg == zero/reg OR reg != zero/reg
12574 // Just a wrapper for a normal branch, plus the predicate test.
12575 instruct cmpL_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, label labl) %{
12576 match(If cmp flags);
12577 effect(USE labl);
12578 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12579 expand %{
12580 jmpCon(cmp,flags,labl); // JEQ or JNE...
12581 %}
12582 %}
12584 // Compare 2 longs and CMOVE longs.
12585 instruct cmovLL_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, eRegL src) %{
12586 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12587 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12588 ins_cost(400);
12589 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12590 "CMOV$cmp $dst.hi,$src.hi" %}
12591 opcode(0x0F,0x40);
12592 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12593 ins_pipe( pipe_cmov_reg_long );
12594 %}
12596 instruct cmovLL_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, load_long_memory src) %{
12597 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12598 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12599 ins_cost(500);
12600 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12601 "CMOV$cmp $dst.hi,$src.hi" %}
12602 opcode(0x0F,0x40);
12603 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12604 ins_pipe( pipe_cmov_reg_long );
12605 %}
12607 // Compare 2 longs and CMOVE ints.
12608 instruct cmovII_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, rRegI dst, rRegI src) %{
12609 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12610 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12611 ins_cost(200);
12612 format %{ "CMOV$cmp $dst,$src" %}
12613 opcode(0x0F,0x40);
12614 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12615 ins_pipe( pipe_cmov_reg );
12616 %}
12618 instruct cmovII_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, rRegI dst, memory src) %{
12619 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12620 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12621 ins_cost(250);
12622 format %{ "CMOV$cmp $dst,$src" %}
12623 opcode(0x0F,0x40);
12624 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12625 ins_pipe( pipe_cmov_mem );
12626 %}
12628 // Compare 2 longs and CMOVE ints.
12629 instruct cmovPP_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegP dst, eRegP src) %{
12630 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12631 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12632 ins_cost(200);
12633 format %{ "CMOV$cmp $dst,$src" %}
12634 opcode(0x0F,0x40);
12635 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12636 ins_pipe( pipe_cmov_reg );
12637 %}
12639 // Compare 2 longs and CMOVE doubles
12640 instruct cmovDDPR_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regDPR dst, regDPR src) %{
12641 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12642 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12643 ins_cost(200);
12644 expand %{
12645 fcmovDPR_regS(cmp,flags,dst,src);
12646 %}
12647 %}
12649 // Compare 2 longs and CMOVE doubles
12650 instruct cmovDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regD dst, regD src) %{
12651 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12652 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12653 ins_cost(200);
12654 expand %{
12655 fcmovD_regS(cmp,flags,dst,src);
12656 %}
12657 %}
12659 instruct cmovFFPR_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regFPR dst, regFPR src) %{
12660 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12661 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12662 ins_cost(200);
12663 expand %{
12664 fcmovFPR_regS(cmp,flags,dst,src);
12665 %}
12666 %}
12668 instruct cmovFF_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regF dst, regF src) %{
12669 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12670 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12671 ins_cost(200);
12672 expand %{
12673 fcmovF_regS(cmp,flags,dst,src);
12674 %}
12675 %}
12677 //======
12678 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
12679 // Same as cmpL_reg_flags_LEGT except must negate src
12680 instruct cmpL_zero_flags_LEGT( flagsReg_long_LEGT flags, eRegL src, immL0 zero, rRegI tmp ) %{
12681 match( Set flags (CmpL src zero ));
12682 effect( TEMP tmp );
12683 ins_cost(300);
12684 format %{ "XOR $tmp,$tmp\t# Long compare for -$src < 0, use commuted test\n\t"
12685 "CMP $tmp,$src.lo\n\t"
12686 "SBB $tmp,$src.hi\n\t" %}
12687 ins_encode( long_cmp_flags3(src, tmp) );
12688 ins_pipe( ialu_reg_reg_long );
12689 %}
12691 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
12692 // Same as cmpL_reg_flags_LTGE except operands swapped. Swapping operands
12693 // requires a commuted test to get the same result.
12694 instruct cmpL_reg_flags_LEGT( flagsReg_long_LEGT flags, eRegL src1, eRegL src2, rRegI tmp ) %{
12695 match( Set flags (CmpL src1 src2 ));
12696 effect( TEMP tmp );
12697 ins_cost(300);
12698 format %{ "CMP $src2.lo,$src1.lo\t! Long compare, swapped operands, use with commuted test\n\t"
12699 "MOV $tmp,$src2.hi\n\t"
12700 "SBB $tmp,$src1.hi\t! Compute flags for long compare" %}
12701 ins_encode( long_cmp_flags2( src2, src1, tmp ) );
12702 ins_pipe( ialu_cr_reg_reg );
12703 %}
12705 // Long compares reg < zero/req OR reg >= zero/req.
12706 // Just a wrapper for a normal branch, plus the predicate test
12707 instruct cmpL_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, label labl) %{
12708 match(If cmp flags);
12709 effect(USE labl);
12710 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le );
12711 ins_cost(300);
12712 expand %{
12713 jmpCon(cmp,flags,labl); // JGT or JLE...
12714 %}
12715 %}
12717 // Compare 2 longs and CMOVE longs.
12718 instruct cmovLL_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, eRegL src) %{
12719 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12720 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12721 ins_cost(400);
12722 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12723 "CMOV$cmp $dst.hi,$src.hi" %}
12724 opcode(0x0F,0x40);
12725 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12726 ins_pipe( pipe_cmov_reg_long );
12727 %}
12729 instruct cmovLL_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, load_long_memory src) %{
12730 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12731 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12732 ins_cost(500);
12733 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12734 "CMOV$cmp $dst.hi,$src.hi+4" %}
12735 opcode(0x0F,0x40);
12736 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12737 ins_pipe( pipe_cmov_reg_long );
12738 %}
12740 // Compare 2 longs and CMOVE ints.
12741 instruct cmovII_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, rRegI dst, rRegI src) %{
12742 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12743 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12744 ins_cost(200);
12745 format %{ "CMOV$cmp $dst,$src" %}
12746 opcode(0x0F,0x40);
12747 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12748 ins_pipe( pipe_cmov_reg );
12749 %}
12751 instruct cmovII_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, rRegI dst, memory src) %{
12752 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12753 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12754 ins_cost(250);
12755 format %{ "CMOV$cmp $dst,$src" %}
12756 opcode(0x0F,0x40);
12757 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12758 ins_pipe( pipe_cmov_mem );
12759 %}
12761 // Compare 2 longs and CMOVE ptrs.
12762 instruct cmovPP_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegP dst, eRegP src) %{
12763 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12764 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12765 ins_cost(200);
12766 format %{ "CMOV$cmp $dst,$src" %}
12767 opcode(0x0F,0x40);
12768 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12769 ins_pipe( pipe_cmov_reg );
12770 %}
12772 // Compare 2 longs and CMOVE doubles
12773 instruct cmovDDPR_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regDPR dst, regDPR src) %{
12774 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12775 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12776 ins_cost(200);
12777 expand %{
12778 fcmovDPR_regS(cmp,flags,dst,src);
12779 %}
12780 %}
12782 // Compare 2 longs and CMOVE doubles
12783 instruct cmovDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regD dst, regD src) %{
12784 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12785 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12786 ins_cost(200);
12787 expand %{
12788 fcmovD_regS(cmp,flags,dst,src);
12789 %}
12790 %}
12792 instruct cmovFFPR_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regFPR dst, regFPR src) %{
12793 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12794 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12795 ins_cost(200);
12796 expand %{
12797 fcmovFPR_regS(cmp,flags,dst,src);
12798 %}
12799 %}
12802 instruct cmovFF_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regF dst, regF src) %{
12803 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12804 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12805 ins_cost(200);
12806 expand %{
12807 fcmovF_regS(cmp,flags,dst,src);
12808 %}
12809 %}
12812 // ============================================================================
12813 // Procedure Call/Return Instructions
12814 // Call Java Static Instruction
12815 // Note: If this code changes, the corresponding ret_addr_offset() and
12816 // compute_padding() functions will have to be adjusted.
12817 instruct CallStaticJavaDirect(method meth) %{
12818 match(CallStaticJava);
12819 predicate(! ((CallStaticJavaNode*)n)->is_method_handle_invoke());
12820 effect(USE meth);
12822 ins_cost(300);
12823 format %{ "CALL,static " %}
12824 opcode(0xE8); /* E8 cd */
12825 ins_encode( pre_call_resets,
12826 Java_Static_Call( meth ),
12827 call_epilog,
12828 post_call_FPU );
12829 ins_pipe( pipe_slow );
12830 ins_alignment(4);
12831 %}
12833 // Call Java Static Instruction (method handle version)
12834 // Note: If this code changes, the corresponding ret_addr_offset() and
12835 // compute_padding() functions will have to be adjusted.
12836 instruct CallStaticJavaHandle(method meth, eBPRegP ebp_mh_SP_save) %{
12837 match(CallStaticJava);
12838 predicate(((CallStaticJavaNode*)n)->is_method_handle_invoke());
12839 effect(USE meth);
12840 // EBP is saved by all callees (for interpreter stack correction).
12841 // We use it here for a similar purpose, in {preserve,restore}_SP.
12843 ins_cost(300);
12844 format %{ "CALL,static/MethodHandle " %}
12845 opcode(0xE8); /* E8 cd */
12846 ins_encode( pre_call_resets,
12847 preserve_SP,
12848 Java_Static_Call( meth ),
12849 restore_SP,
12850 call_epilog,
12851 post_call_FPU );
12852 ins_pipe( pipe_slow );
12853 ins_alignment(4);
12854 %}
12856 // Call Java Dynamic Instruction
12857 // Note: If this code changes, the corresponding ret_addr_offset() and
12858 // compute_padding() functions will have to be adjusted.
12859 instruct CallDynamicJavaDirect(method meth) %{
12860 match(CallDynamicJava);
12861 effect(USE meth);
12863 ins_cost(300);
12864 format %{ "MOV EAX,(oop)-1\n\t"
12865 "CALL,dynamic" %}
12866 opcode(0xE8); /* E8 cd */
12867 ins_encode( pre_call_resets,
12868 Java_Dynamic_Call( meth ),
12869 call_epilog,
12870 post_call_FPU );
12871 ins_pipe( pipe_slow );
12872 ins_alignment(4);
12873 %}
12875 // Call Runtime Instruction
12876 instruct CallRuntimeDirect(method meth) %{
12877 match(CallRuntime );
12878 effect(USE meth);
12880 ins_cost(300);
12881 format %{ "CALL,runtime " %}
12882 opcode(0xE8); /* E8 cd */
12883 // Use FFREEs to clear entries in float stack
12884 ins_encode( pre_call_resets,
12885 FFree_Float_Stack_All,
12886 Java_To_Runtime( meth ),
12887 post_call_FPU );
12888 ins_pipe( pipe_slow );
12889 %}
12891 // Call runtime without safepoint
12892 instruct CallLeafDirect(method meth) %{
12893 match(CallLeaf);
12894 effect(USE meth);
12896 ins_cost(300);
12897 format %{ "CALL_LEAF,runtime " %}
12898 opcode(0xE8); /* E8 cd */
12899 ins_encode( pre_call_resets,
12900 FFree_Float_Stack_All,
12901 Java_To_Runtime( meth ),
12902 Verify_FPU_For_Leaf, post_call_FPU );
12903 ins_pipe( pipe_slow );
12904 %}
12906 instruct CallLeafNoFPDirect(method meth) %{
12907 match(CallLeafNoFP);
12908 effect(USE meth);
12910 ins_cost(300);
12911 format %{ "CALL_LEAF_NOFP,runtime " %}
12912 opcode(0xE8); /* E8 cd */
12913 ins_encode(Java_To_Runtime(meth));
12914 ins_pipe( pipe_slow );
12915 %}
12918 // Return Instruction
12919 // Remove the return address & jump to it.
12920 instruct Ret() %{
12921 match(Return);
12922 format %{ "RET" %}
12923 opcode(0xC3);
12924 ins_encode(OpcP);
12925 ins_pipe( pipe_jmp );
12926 %}
12928 // Tail Call; Jump from runtime stub to Java code.
12929 // Also known as an 'interprocedural jump'.
12930 // Target of jump will eventually return to caller.
12931 // TailJump below removes the return address.
12932 instruct TailCalljmpInd(eRegP_no_EBP jump_target, eBXRegP method_oop) %{
12933 match(TailCall jump_target method_oop );
12934 ins_cost(300);
12935 format %{ "JMP $jump_target \t# EBX holds method oop" %}
12936 opcode(0xFF, 0x4); /* Opcode FF /4 */
12937 ins_encode( OpcP, RegOpc(jump_target) );
12938 ins_pipe( pipe_jmp );
12939 %}
12942 // Tail Jump; remove the return address; jump to target.
12943 // TailCall above leaves the return address around.
12944 instruct tailjmpInd(eRegP_no_EBP jump_target, eAXRegP ex_oop) %{
12945 match( TailJump jump_target ex_oop );
12946 ins_cost(300);
12947 format %{ "POP EDX\t# pop return address into dummy\n\t"
12948 "JMP $jump_target " %}
12949 opcode(0xFF, 0x4); /* Opcode FF /4 */
12950 ins_encode( enc_pop_rdx,
12951 OpcP, RegOpc(jump_target) );
12952 ins_pipe( pipe_jmp );
12953 %}
12955 // Create exception oop: created by stack-crawling runtime code.
12956 // Created exception is now available to this handler, and is setup
12957 // just prior to jumping to this handler. No code emitted.
12958 instruct CreateException( eAXRegP ex_oop )
12959 %{
12960 match(Set ex_oop (CreateEx));
12962 size(0);
12963 // use the following format syntax
12964 format %{ "# exception oop is in EAX; no code emitted" %}
12965 ins_encode();
12966 ins_pipe( empty );
12967 %}
12970 // Rethrow exception:
12971 // The exception oop will come in the first argument position.
12972 // Then JUMP (not call) to the rethrow stub code.
12973 instruct RethrowException()
12974 %{
12975 match(Rethrow);
12977 // use the following format syntax
12978 format %{ "JMP rethrow_stub" %}
12979 ins_encode(enc_rethrow);
12980 ins_pipe( pipe_jmp );
12981 %}
12983 // inlined locking and unlocking
12986 instruct cmpFastLock( eFlagsReg cr, eRegP object, eBXRegP box, eAXRegI tmp, eRegP scr) %{
12987 match( Set cr (FastLock object box) );
12988 effect( TEMP tmp, TEMP scr, USE_KILL box );
12989 ins_cost(300);
12990 format %{ "FASTLOCK $object,$box\t! kills $box,$tmp,$scr" %}
12991 ins_encode( Fast_Lock(object,box,tmp,scr) );
12992 ins_pipe( pipe_slow );
12993 %}
12995 instruct cmpFastUnlock( eFlagsReg cr, eRegP object, eAXRegP box, eRegP tmp ) %{
12996 match( Set cr (FastUnlock object box) );
12997 effect( TEMP tmp, USE_KILL box );
12998 ins_cost(300);
12999 format %{ "FASTUNLOCK $object,$box\t! kills $box,$tmp" %}
13000 ins_encode( Fast_Unlock(object,box,tmp) );
13001 ins_pipe( pipe_slow );
13002 %}
13006 // ============================================================================
13007 // Safepoint Instruction
13008 instruct safePoint_poll(eFlagsReg cr) %{
13009 match(SafePoint);
13010 effect(KILL cr);
13012 // TODO-FIXME: we currently poll at offset 0 of the safepoint polling page.
13013 // On SPARC that might be acceptable as we can generate the address with
13014 // just a sethi, saving an or. By polling at offset 0 we can end up
13015 // putting additional pressure on the index-0 in the D$. Because of
13016 // alignment (just like the situation at hand) the lower indices tend
13017 // to see more traffic. It'd be better to change the polling address
13018 // to offset 0 of the last $line in the polling page.
13020 format %{ "TSTL #polladdr,EAX\t! Safepoint: poll for GC" %}
13021 ins_cost(125);
13022 size(6) ;
13023 ins_encode( Safepoint_Poll() );
13024 ins_pipe( ialu_reg_mem );
13025 %}
13028 // ============================================================================
13029 // This name is KNOWN by the ADLC and cannot be changed.
13030 // The ADLC forces a 'TypeRawPtr::BOTTOM' output type
13031 // for this guy.
13032 instruct tlsLoadP(eRegP dst, eFlagsReg cr) %{
13033 match(Set dst (ThreadLocal));
13034 effect(DEF dst, KILL cr);
13036 format %{ "MOV $dst, Thread::current()" %}
13037 ins_encode %{
13038 Register dstReg = as_Register($dst$$reg);
13039 __ get_thread(dstReg);
13040 %}
13041 ins_pipe( ialu_reg_fat );
13042 %}
13046 //----------PEEPHOLE RULES-----------------------------------------------------
13047 // These must follow all instruction definitions as they use the names
13048 // defined in the instructions definitions.
13049 //
13050 // peepmatch ( root_instr_name [preceding_instruction]* );
13051 //
13052 // peepconstraint %{
13053 // (instruction_number.operand_name relational_op instruction_number.operand_name
13054 // [, ...] );
13055 // // instruction numbers are zero-based using left to right order in peepmatch
13056 //
13057 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) );
13058 // // provide an instruction_number.operand_name for each operand that appears
13059 // // in the replacement instruction's match rule
13060 //
13061 // ---------VM FLAGS---------------------------------------------------------
13062 //
13063 // All peephole optimizations can be turned off using -XX:-OptoPeephole
13064 //
13065 // Each peephole rule is given an identifying number starting with zero and
13066 // increasing by one in the order seen by the parser. An individual peephole
13067 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=#
13068 // on the command-line.
13069 //
13070 // ---------CURRENT LIMITATIONS----------------------------------------------
13071 //
13072 // Only match adjacent instructions in same basic block
13073 // Only equality constraints
13074 // Only constraints between operands, not (0.dest_reg == EAX_enc)
13075 // Only one replacement instruction
13076 //
13077 // ---------EXAMPLE----------------------------------------------------------
13078 //
13079 // // pertinent parts of existing instructions in architecture description
13080 // instruct movI(rRegI dst, rRegI src) %{
13081 // match(Set dst (CopyI src));
13082 // %}
13083 //
13084 // instruct incI_eReg(rRegI dst, immI1 src, eFlagsReg cr) %{
13085 // match(Set dst (AddI dst src));
13086 // effect(KILL cr);
13087 // %}
13088 //
13089 // // Change (inc mov) to lea
13090 // peephole %{
13091 // // increment preceeded by register-register move
13092 // peepmatch ( incI_eReg movI );
13093 // // require that the destination register of the increment
13094 // // match the destination register of the move
13095 // peepconstraint ( 0.dst == 1.dst );
13096 // // construct a replacement instruction that sets
13097 // // the destination to ( move's source register + one )
13098 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13099 // %}
13100 //
13101 // Implementation no longer uses movX instructions since
13102 // machine-independent system no longer uses CopyX nodes.
13103 //
13104 // peephole %{
13105 // peepmatch ( incI_eReg movI );
13106 // peepconstraint ( 0.dst == 1.dst );
13107 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13108 // %}
13109 //
13110 // peephole %{
13111 // peepmatch ( decI_eReg movI );
13112 // peepconstraint ( 0.dst == 1.dst );
13113 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13114 // %}
13115 //
13116 // peephole %{
13117 // peepmatch ( addI_eReg_imm movI );
13118 // peepconstraint ( 0.dst == 1.dst );
13119 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13120 // %}
13121 //
13122 // peephole %{
13123 // peepmatch ( addP_eReg_imm movP );
13124 // peepconstraint ( 0.dst == 1.dst );
13125 // peepreplace ( leaP_eReg_immI( 0.dst 1.src 0.src ) );
13126 // %}
13128 // // Change load of spilled value to only a spill
13129 // instruct storeI(memory mem, rRegI src) %{
13130 // match(Set mem (StoreI mem src));
13131 // %}
13132 //
13133 // instruct loadI(rRegI dst, memory mem) %{
13134 // match(Set dst (LoadI mem));
13135 // %}
13136 //
13137 peephole %{
13138 peepmatch ( loadI storeI );
13139 peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem );
13140 peepreplace ( storeI( 1.mem 1.mem 1.src ) );
13141 %}
13143 //----------SMARTSPILL RULES---------------------------------------------------
13144 // These must follow all instruction definitions as they use the names
13145 // defined in the instructions definitions.