Wed, 07 Jan 2009 11:23:28 -0800
6790182: matcher.cpp:1375: assert(false,"bad AD file")
Summary: Add a match rule for regD_low in regD definition.
Reviewed-by: never
1 /*
2 * Copyright 1997-2008 Sun Microsystems, Inc. All Rights Reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 * have any questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_templateInterpreter_sparc.cpp.incl"
28 #ifndef CC_INTERP
29 #ifndef FAST_DISPATCH
30 #define FAST_DISPATCH 1
31 #endif
32 #undef FAST_DISPATCH
35 // Generation of Interpreter
36 //
37 // The InterpreterGenerator generates the interpreter into Interpreter::_code.
40 #define __ _masm->
43 //----------------------------------------------------------------------------------------------------
46 void InterpreterGenerator::save_native_result(void) {
47 // result potentially in O0/O1: save it across calls
48 const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
50 // result potentially in F0/F1: save it across calls
51 const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
53 // save and restore any potential method result value around the unlocking operation
54 __ stf(FloatRegisterImpl::D, F0, d_tmp);
55 #ifdef _LP64
56 __ stx(O0, l_tmp);
57 #else
58 __ std(O0, l_tmp);
59 #endif
60 }
62 void InterpreterGenerator::restore_native_result(void) {
63 const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
64 const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
66 // Restore any method result value
67 __ ldf(FloatRegisterImpl::D, d_tmp, F0);
68 #ifdef _LP64
69 __ ldx(l_tmp, O0);
70 #else
71 __ ldd(l_tmp, O0);
72 #endif
73 }
75 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) {
76 assert(!pass_oop || message == NULL, "either oop or message but not both");
77 address entry = __ pc();
78 // expression stack must be empty before entering the VM if an exception happened
79 __ empty_expression_stack();
80 // load exception object
81 __ set((intptr_t)name, G3_scratch);
82 if (pass_oop) {
83 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), G3_scratch, Otos_i);
84 } else {
85 __ set((intptr_t)message, G4_scratch);
86 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), G3_scratch, G4_scratch);
87 }
88 // throw exception
89 assert(Interpreter::throw_exception_entry() != NULL, "generate it first");
90 Address thrower(G3_scratch, Interpreter::throw_exception_entry());
91 __ jump_to (thrower);
92 __ delayed()->nop();
93 return entry;
94 }
96 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
97 address entry = __ pc();
98 // expression stack must be empty before entering the VM if an exception
99 // happened
100 __ empty_expression_stack();
101 // load exception object
102 __ call_VM(Oexception,
103 CAST_FROM_FN_PTR(address,
104 InterpreterRuntime::throw_ClassCastException),
105 Otos_i);
106 __ should_not_reach_here();
107 return entry;
108 }
111 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) {
112 address entry = __ pc();
113 // expression stack must be empty before entering the VM if an exception happened
114 __ empty_expression_stack();
115 // convention: expect aberrant index in register G3_scratch, then shuffle the
116 // index to G4_scratch for the VM call
117 __ mov(G3_scratch, G4_scratch);
118 __ set((intptr_t)name, G3_scratch);
119 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException), G3_scratch, G4_scratch);
120 __ should_not_reach_here();
121 return entry;
122 }
125 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
126 address entry = __ pc();
127 // expression stack must be empty before entering the VM if an exception happened
128 __ empty_expression_stack();
129 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
130 __ should_not_reach_here();
131 return entry;
132 }
135 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
136 address compiled_entry = __ pc();
137 Label cont;
139 address entry = __ pc();
140 #if !defined(_LP64) && defined(COMPILER2)
141 // All return values are where we want them, except for Longs. C2 returns
142 // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1.
143 // Since the interpreter will return longs in G1 and O0/O1 in the 32bit
144 // build even if we are returning from interpreted we just do a little
145 // stupid shuffing.
146 // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to
147 // do this here. Unfortunately if we did a rethrow we'd see an machepilog node
148 // first which would move g1 -> O0/O1 and destroy the exception we were throwing.
150 if( state == ltos ) {
151 __ srl (G1, 0,O1);
152 __ srlx(G1,32,O0);
153 }
154 #endif /* !_LP64 && COMPILER2 */
157 __ bind(cont);
159 // The callee returns with the stack possibly adjusted by adapter transition
160 // We remove that possible adjustment here.
161 // All interpreter local registers are untouched. Any result is passed back
162 // in the O0/O1 or float registers. Before continuing, the arguments must be
163 // popped from the java expression stack; i.e., Lesp must be adjusted.
165 __ mov(Llast_SP, SP); // Remove any adapter added stack space.
168 const Register cache = G3_scratch;
169 const Register size = G1_scratch;
170 __ get_cache_and_index_at_bcp(cache, G1_scratch, 1);
171 __ ld_ptr(Address(cache, 0, in_bytes(constantPoolCacheOopDesc::base_offset()) +
172 in_bytes(ConstantPoolCacheEntry::flags_offset())), size);
173 __ and3(size, 0xFF, size); // argument size in words
174 __ sll(size, Interpreter::logStackElementSize(), size); // each argument size in bytes
175 __ add(Lesp, size, Lesp); // pop arguments
176 __ dispatch_next(state, step);
178 return entry;
179 }
182 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) {
183 address entry = __ pc();
184 __ get_constant_pool_cache(LcpoolCache); // load LcpoolCache
185 { Label L;
186 Address exception_addr (G2_thread, 0, in_bytes(Thread::pending_exception_offset()));
188 __ ld_ptr(exception_addr, Gtemp);
189 __ tst(Gtemp);
190 __ brx(Assembler::equal, false, Assembler::pt, L);
191 __ delayed()->nop();
192 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
193 __ should_not_reach_here();
194 __ bind(L);
195 }
196 __ dispatch_next(state, step);
197 return entry;
198 }
200 // A result handler converts/unboxes a native call result into
201 // a java interpreter/compiler result. The current frame is an
202 // interpreter frame. The activation frame unwind code must be
203 // consistent with that of TemplateTable::_return(...). In the
204 // case of native methods, the caller's SP was not modified.
205 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) {
206 address entry = __ pc();
207 Register Itos_i = Otos_i ->after_save();
208 Register Itos_l = Otos_l ->after_save();
209 Register Itos_l1 = Otos_l1->after_save();
210 Register Itos_l2 = Otos_l2->after_save();
211 switch (type) {
212 case T_BOOLEAN: __ subcc(G0, O0, G0); __ addc(G0, 0, Itos_i); break; // !0 => true; 0 => false
213 case T_CHAR : __ sll(O0, 16, O0); __ srl(O0, 16, Itos_i); break; // cannot use and3, 0xFFFF too big as immediate value!
214 case T_BYTE : __ sll(O0, 24, O0); __ sra(O0, 24, Itos_i); break;
215 case T_SHORT : __ sll(O0, 16, O0); __ sra(O0, 16, Itos_i); break;
216 case T_LONG :
217 #ifndef _LP64
218 __ mov(O1, Itos_l2); // move other half of long
219 #endif // ifdef or no ifdef, fall through to the T_INT case
220 case T_INT : __ mov(O0, Itos_i); break;
221 case T_VOID : /* nothing to do */ break;
222 case T_FLOAT : assert(F0 == Ftos_f, "fix this code" ); break;
223 case T_DOUBLE : assert(F0 == Ftos_d, "fix this code" ); break;
224 case T_OBJECT :
225 __ ld_ptr(FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS, Itos_i);
226 __ verify_oop(Itos_i);
227 break;
228 default : ShouldNotReachHere();
229 }
230 __ ret(); // return from interpreter activation
231 __ delayed()->restore(I5_savedSP, G0, SP); // remove interpreter frame
232 NOT_PRODUCT(__ emit_long(0);) // marker for disassembly
233 return entry;
234 }
236 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) {
237 address entry = __ pc();
238 __ push(state);
239 __ call_VM(noreg, runtime_entry);
240 __ dispatch_via(vtos, Interpreter::normal_table(vtos));
241 return entry;
242 }
245 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
246 address entry = __ pc();
247 __ dispatch_next(state);
248 return entry;
249 }
251 //
252 // Helpers for commoning out cases in the various type of method entries.
253 //
255 // increment invocation count & check for overflow
256 //
257 // Note: checking for negative value instead of overflow
258 // so we have a 'sticky' overflow test
259 //
260 // Lmethod: method
261 // ??: invocation counter
262 //
263 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) {
264 // Update standard invocation counters
265 __ increment_invocation_counter(O0, G3_scratch);
266 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
267 Address interpreter_invocation_counter(Lmethod, 0, in_bytes(methodOopDesc::interpreter_invocation_counter_offset()));
268 __ ld(interpreter_invocation_counter, G3_scratch);
269 __ inc(G3_scratch);
270 __ st(G3_scratch, interpreter_invocation_counter);
271 }
273 if (ProfileInterpreter && profile_method != NULL) {
274 // Test to see if we should create a method data oop
275 Address profile_limit(G3_scratch, (address)&InvocationCounter::InterpreterProfileLimit);
276 __ sethi(profile_limit);
277 __ ld(profile_limit, G3_scratch);
278 __ cmp(O0, G3_scratch);
279 __ br(Assembler::lessUnsigned, false, Assembler::pn, *profile_method_continue);
280 __ delayed()->nop();
282 // if no method data exists, go to profile_method
283 __ test_method_data_pointer(*profile_method);
284 }
286 Address invocation_limit(G3_scratch, (address)&InvocationCounter::InterpreterInvocationLimit);
287 __ sethi(invocation_limit);
288 __ ld(invocation_limit, G3_scratch);
289 __ cmp(O0, G3_scratch);
290 __ br(Assembler::greaterEqualUnsigned, false, Assembler::pn, *overflow);
291 __ delayed()->nop();
293 }
295 // Allocate monitor and lock method (asm interpreter)
296 // ebx - methodOop
297 //
298 void InterpreterGenerator::lock_method(void) {
299 const Address access_flags (Lmethod, 0, in_bytes(methodOopDesc::access_flags_offset()));
300 __ ld(access_flags, O0);
302 #ifdef ASSERT
303 { Label ok;
304 __ btst(JVM_ACC_SYNCHRONIZED, O0);
305 __ br( Assembler::notZero, false, Assembler::pt, ok);
306 __ delayed()->nop();
307 __ stop("method doesn't need synchronization");
308 __ bind(ok);
309 }
310 #endif // ASSERT
312 // get synchronization object to O0
313 { Label done;
314 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
315 __ btst(JVM_ACC_STATIC, O0);
316 __ br( Assembler::zero, true, Assembler::pt, done);
317 __ delayed()->ld_ptr(Llocals, Interpreter::local_offset_in_bytes(0), O0); // get receiver for not-static case
319 __ ld_ptr( Lmethod, in_bytes(methodOopDesc::constants_offset()), O0);
320 __ ld_ptr( O0, constantPoolOopDesc::pool_holder_offset_in_bytes(), O0);
322 // lock the mirror, not the klassOop
323 __ ld_ptr( O0, mirror_offset, O0);
325 #ifdef ASSERT
326 __ tst(O0);
327 __ breakpoint_trap(Assembler::zero);
328 #endif // ASSERT
330 __ bind(done);
331 }
333 __ add_monitor_to_stack(true, noreg, noreg); // allocate monitor elem
334 __ st_ptr( O0, Lmonitors, BasicObjectLock::obj_offset_in_bytes()); // store object
335 // __ untested("lock_object from method entry");
336 __ lock_object(Lmonitors, O0);
337 }
340 void TemplateInterpreterGenerator::generate_stack_overflow_check(Register Rframe_size,
341 Register Rscratch,
342 Register Rscratch2) {
343 const int page_size = os::vm_page_size();
344 Address saved_exception_pc(G2_thread, 0,
345 in_bytes(JavaThread::saved_exception_pc_offset()));
346 Label after_frame_check;
348 assert_different_registers(Rframe_size, Rscratch, Rscratch2);
350 __ set( page_size, Rscratch );
351 __ cmp( Rframe_size, Rscratch );
353 __ br( Assembler::lessEqual, false, Assembler::pt, after_frame_check );
354 __ delayed()->nop();
356 // get the stack base, and in debug, verify it is non-zero
357 __ ld_ptr( G2_thread, in_bytes(Thread::stack_base_offset()), Rscratch );
358 #ifdef ASSERT
359 Label base_not_zero;
360 __ cmp( Rscratch, G0 );
361 __ brx( Assembler::notEqual, false, Assembler::pn, base_not_zero );
362 __ delayed()->nop();
363 __ stop("stack base is zero in generate_stack_overflow_check");
364 __ bind(base_not_zero);
365 #endif
367 // get the stack size, and in debug, verify it is non-zero
368 assert( sizeof(size_t) == sizeof(intptr_t), "wrong load size" );
369 __ ld_ptr( G2_thread, in_bytes(Thread::stack_size_offset()), Rscratch2 );
370 #ifdef ASSERT
371 Label size_not_zero;
372 __ cmp( Rscratch2, G0 );
373 __ brx( Assembler::notEqual, false, Assembler::pn, size_not_zero );
374 __ delayed()->nop();
375 __ stop("stack size is zero in generate_stack_overflow_check");
376 __ bind(size_not_zero);
377 #endif
379 // compute the beginning of the protected zone minus the requested frame size
380 __ sub( Rscratch, Rscratch2, Rscratch );
381 __ set( (StackRedPages+StackYellowPages) * page_size, Rscratch2 );
382 __ add( Rscratch, Rscratch2, Rscratch );
384 // Add in the size of the frame (which is the same as subtracting it from the
385 // SP, which would take another register
386 __ add( Rscratch, Rframe_size, Rscratch );
388 // the frame is greater than one page in size, so check against
389 // the bottom of the stack
390 __ cmp( SP, Rscratch );
391 __ brx( Assembler::greater, false, Assembler::pt, after_frame_check );
392 __ delayed()->nop();
394 // Save the return address as the exception pc
395 __ st_ptr(O7, saved_exception_pc);
397 // the stack will overflow, throw an exception
398 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
400 // if you get to here, then there is enough stack space
401 __ bind( after_frame_check );
402 }
405 //
406 // Generate a fixed interpreter frame. This is identical setup for interpreted
407 // methods and for native methods hence the shared code.
409 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
410 //
411 //
412 // The entry code sets up a new interpreter frame in 4 steps:
413 //
414 // 1) Increase caller's SP by for the extra local space needed:
415 // (check for overflow)
416 // Efficient implementation of xload/xstore bytecodes requires
417 // that arguments and non-argument locals are in a contigously
418 // addressable memory block => non-argument locals must be
419 // allocated in the caller's frame.
420 //
421 // 2) Create a new stack frame and register window:
422 // The new stack frame must provide space for the standard
423 // register save area, the maximum java expression stack size,
424 // the monitor slots (0 slots initially), and some frame local
425 // scratch locations.
426 //
427 // 3) The following interpreter activation registers must be setup:
428 // Lesp : expression stack pointer
429 // Lbcp : bytecode pointer
430 // Lmethod : method
431 // Llocals : locals pointer
432 // Lmonitors : monitor pointer
433 // LcpoolCache: constant pool cache
434 //
435 // 4) Initialize the non-argument locals if necessary:
436 // Non-argument locals may need to be initialized to NULL
437 // for GC to work. If the oop-map information is accurate
438 // (in the absence of the JSR problem), no initialization
439 // is necessary.
440 //
441 // (gri - 2/25/2000)
444 const Address size_of_parameters(G5_method, 0, in_bytes(methodOopDesc::size_of_parameters_offset()));
445 const Address size_of_locals (G5_method, 0, in_bytes(methodOopDesc::size_of_locals_offset()));
446 const Address max_stack (G5_method, 0, in_bytes(methodOopDesc::max_stack_offset()));
447 int rounded_vm_local_words = round_to( frame::interpreter_frame_vm_local_words, WordsPerLong );
449 const int extra_space =
450 rounded_vm_local_words + // frame local scratch space
451 frame::memory_parameter_word_sp_offset + // register save area
452 (native_call ? frame::interpreter_frame_extra_outgoing_argument_words : 0);
454 const Register Glocals_size = G3;
455 const Register Otmp1 = O3;
456 const Register Otmp2 = O4;
457 // Lscratch can't be used as a temporary because the call_stub uses
458 // it to assert that the stack frame was setup correctly.
460 __ lduh( size_of_parameters, Glocals_size);
462 // Gargs points to first local + BytesPerWord
463 // Set the saved SP after the register window save
464 //
465 assert_different_registers(Gargs, Glocals_size, Gframe_size, O5_savedSP);
466 __ sll(Glocals_size, Interpreter::logStackElementSize(), Otmp1);
467 __ add(Gargs, Otmp1, Gargs);
469 if (native_call) {
470 __ calc_mem_param_words( Glocals_size, Gframe_size );
471 __ add( Gframe_size, extra_space, Gframe_size);
472 __ round_to( Gframe_size, WordsPerLong );
473 __ sll( Gframe_size, LogBytesPerWord, Gframe_size );
474 } else {
476 //
477 // Compute number of locals in method apart from incoming parameters
478 //
479 __ lduh( size_of_locals, Otmp1 );
480 __ sub( Otmp1, Glocals_size, Glocals_size );
481 __ round_to( Glocals_size, WordsPerLong );
482 __ sll( Glocals_size, Interpreter::logStackElementSize(), Glocals_size );
484 // see if the frame is greater than one page in size. If so,
485 // then we need to verify there is enough stack space remaining
486 // Frame_size = (max_stack + extra_space) * BytesPerWord;
487 __ lduh( max_stack, Gframe_size );
488 __ add( Gframe_size, extra_space, Gframe_size );
489 __ round_to( Gframe_size, WordsPerLong );
490 __ sll( Gframe_size, Interpreter::logStackElementSize(), Gframe_size);
492 // Add in java locals size for stack overflow check only
493 __ add( Gframe_size, Glocals_size, Gframe_size );
495 const Register Otmp2 = O4;
496 assert_different_registers(Otmp1, Otmp2, O5_savedSP);
497 generate_stack_overflow_check(Gframe_size, Otmp1, Otmp2);
499 __ sub( Gframe_size, Glocals_size, Gframe_size);
501 //
502 // bump SP to accomodate the extra locals
503 //
504 __ sub( SP, Glocals_size, SP );
505 }
507 //
508 // now set up a stack frame with the size computed above
509 //
510 __ neg( Gframe_size );
511 __ save( SP, Gframe_size, SP );
513 //
514 // now set up all the local cache registers
515 //
516 // NOTE: At this point, Lbyte_code/Lscratch has been modified. Note
517 // that all present references to Lbyte_code initialize the register
518 // immediately before use
519 if (native_call) {
520 __ mov(G0, Lbcp);
521 } else {
522 __ ld_ptr(Address(G5_method, 0, in_bytes(methodOopDesc::const_offset())), Lbcp );
523 __ add(Address(Lbcp, 0, in_bytes(constMethodOopDesc::codes_offset())), Lbcp );
524 }
525 __ mov( G5_method, Lmethod); // set Lmethod
526 __ get_constant_pool_cache( LcpoolCache ); // set LcpoolCache
527 __ sub(FP, rounded_vm_local_words * BytesPerWord, Lmonitors ); // set Lmonitors
528 #ifdef _LP64
529 __ add( Lmonitors, STACK_BIAS, Lmonitors ); // Account for 64 bit stack bias
530 #endif
531 __ sub(Lmonitors, BytesPerWord, Lesp); // set Lesp
533 // setup interpreter activation registers
534 __ sub(Gargs, BytesPerWord, Llocals); // set Llocals
536 if (ProfileInterpreter) {
537 #ifdef FAST_DISPATCH
538 // FAST_DISPATCH and ProfileInterpreter are mutually exclusive since
539 // they both use I2.
540 assert(0, "FAST_DISPATCH and +ProfileInterpreter are mutually exclusive");
541 #endif // FAST_DISPATCH
542 __ set_method_data_pointer();
543 }
545 }
547 // Empty method, generate a very fast return.
549 address InterpreterGenerator::generate_empty_entry(void) {
551 // A method that does nother but return...
553 address entry = __ pc();
554 Label slow_path;
556 __ verify_oop(G5_method);
558 // do nothing for empty methods (do not even increment invocation counter)
559 if ( UseFastEmptyMethods) {
560 // If we need a safepoint check, generate full interpreter entry.
561 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state());
562 __ load_contents(sync_state, G3_scratch);
563 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
564 __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
565 __ delayed()->nop();
567 // Code: _return
568 __ retl();
569 __ delayed()->mov(O5_savedSP, SP);
571 __ bind(slow_path);
572 (void) generate_normal_entry(false);
574 return entry;
575 }
576 return NULL;
577 }
579 // Call an accessor method (assuming it is resolved, otherwise drop into
580 // vanilla (slow path) entry
582 // Generates code to elide accessor methods
583 // Uses G3_scratch and G1_scratch as scratch
584 address InterpreterGenerator::generate_accessor_entry(void) {
586 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof;
587 // parameter size = 1
588 // Note: We can only use this code if the getfield has been resolved
589 // and if we don't have a null-pointer exception => check for
590 // these conditions first and use slow path if necessary.
591 address entry = __ pc();
592 Label slow_path;
595 // XXX: for compressed oops pointer loading and decoding doesn't fit in
596 // delay slot and damages G1
597 if ( UseFastAccessorMethods && !UseCompressedOops ) {
598 // Check if we need to reach a safepoint and generate full interpreter
599 // frame if so.
600 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state());
601 __ load_contents(sync_state, G3_scratch);
602 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
603 __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
604 __ delayed()->nop();
606 // Check if local 0 != NULL
607 __ ld_ptr(Gargs, G0, Otos_i ); // get local 0
608 __ tst(Otos_i); // check if local 0 == NULL and go the slow path
609 __ brx(Assembler::zero, false, Assembler::pn, slow_path);
610 __ delayed()->nop();
613 // read first instruction word and extract bytecode @ 1 and index @ 2
614 // get first 4 bytes of the bytecodes (big endian!)
615 __ ld_ptr(Address(G5_method, 0, in_bytes(methodOopDesc::const_offset())), G1_scratch);
616 __ ld(Address(G1_scratch, 0, in_bytes(constMethodOopDesc::codes_offset())), G1_scratch);
618 // move index @ 2 far left then to the right most two bytes.
619 __ sll(G1_scratch, 2*BitsPerByte, G1_scratch);
620 __ srl(G1_scratch, 2*BitsPerByte - exact_log2(in_words(
621 ConstantPoolCacheEntry::size()) * BytesPerWord), G1_scratch);
623 // get constant pool cache
624 __ ld_ptr(G5_method, in_bytes(methodOopDesc::constants_offset()), G3_scratch);
625 __ ld_ptr(G3_scratch, constantPoolOopDesc::cache_offset_in_bytes(), G3_scratch);
627 // get specific constant pool cache entry
628 __ add(G3_scratch, G1_scratch, G3_scratch);
630 // Check the constant Pool cache entry to see if it has been resolved.
631 // If not, need the slow path.
632 ByteSize cp_base_offset = constantPoolCacheOopDesc::base_offset();
633 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::indices_offset()), G1_scratch);
634 __ srl(G1_scratch, 2*BitsPerByte, G1_scratch);
635 __ and3(G1_scratch, 0xFF, G1_scratch);
636 __ cmp(G1_scratch, Bytecodes::_getfield);
637 __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
638 __ delayed()->nop();
640 // Get the type and return field offset from the constant pool cache
641 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::flags_offset()), G1_scratch);
642 __ ld_ptr(G3_scratch, in_bytes(cp_base_offset + ConstantPoolCacheEntry::f2_offset()), G3_scratch);
644 Label xreturn_path;
645 // Need to differentiate between igetfield, agetfield, bgetfield etc.
646 // because they are different sizes.
647 // Get the type from the constant pool cache
648 __ srl(G1_scratch, ConstantPoolCacheEntry::tosBits, G1_scratch);
649 // Make sure we don't need to mask G1_scratch for tosBits after the above shift
650 ConstantPoolCacheEntry::verify_tosBits();
651 __ cmp(G1_scratch, atos );
652 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
653 __ delayed()->ld_ptr(Otos_i, G3_scratch, Otos_i);
654 __ cmp(G1_scratch, itos);
655 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
656 __ delayed()->ld(Otos_i, G3_scratch, Otos_i);
657 __ cmp(G1_scratch, stos);
658 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
659 __ delayed()->ldsh(Otos_i, G3_scratch, Otos_i);
660 __ cmp(G1_scratch, ctos);
661 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
662 __ delayed()->lduh(Otos_i, G3_scratch, Otos_i);
663 #ifdef ASSERT
664 __ cmp(G1_scratch, btos);
665 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
666 __ delayed()->ldsb(Otos_i, G3_scratch, Otos_i);
667 __ should_not_reach_here();
668 #endif
669 __ ldsb(Otos_i, G3_scratch, Otos_i);
670 __ bind(xreturn_path);
672 // _ireturn/_areturn
673 __ retl(); // return from leaf routine
674 __ delayed()->mov(O5_savedSP, SP);
676 // Generate regular method entry
677 __ bind(slow_path);
678 (void) generate_normal_entry(false);
679 return entry;
680 }
681 return NULL;
682 }
684 //
685 // Interpreter stub for calling a native method. (asm interpreter)
686 // This sets up a somewhat different looking stack for calling the native method
687 // than the typical interpreter frame setup.
688 //
690 address InterpreterGenerator::generate_native_entry(bool synchronized) {
691 address entry = __ pc();
693 // the following temporary registers are used during frame creation
694 const Register Gtmp1 = G3_scratch ;
695 const Register Gtmp2 = G1_scratch;
696 bool inc_counter = UseCompiler || CountCompiledCalls;
698 // make sure registers are different!
699 assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
701 const Address Laccess_flags (Lmethod, 0, in_bytes(methodOopDesc::access_flags_offset()));
703 __ verify_oop(G5_method);
705 const Register Glocals_size = G3;
706 assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
708 // make sure method is native & not abstract
709 // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
710 #ifdef ASSERT
711 __ ld(G5_method, in_bytes(methodOopDesc::access_flags_offset()), Gtmp1);
712 {
713 Label L;
714 __ btst(JVM_ACC_NATIVE, Gtmp1);
715 __ br(Assembler::notZero, false, Assembler::pt, L);
716 __ delayed()->nop();
717 __ stop("tried to execute non-native method as native");
718 __ bind(L);
719 }
720 { Label L;
721 __ btst(JVM_ACC_ABSTRACT, Gtmp1);
722 __ br(Assembler::zero, false, Assembler::pt, L);
723 __ delayed()->nop();
724 __ stop("tried to execute abstract method as non-abstract");
725 __ bind(L);
726 }
727 #endif // ASSERT
729 // generate the code to allocate the interpreter stack frame
730 generate_fixed_frame(true);
732 //
733 // No locals to initialize for native method
734 //
736 // this slot will be set later, we initialize it to null here just in
737 // case we get a GC before the actual value is stored later
738 __ st_ptr(G0, Address(FP, 0, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS));
740 const Address do_not_unlock_if_synchronized(G2_thread, 0,
741 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
742 // Since at this point in the method invocation the exception handler
743 // would try to exit the monitor of synchronized methods which hasn't
744 // been entered yet, we set the thread local variable
745 // _do_not_unlock_if_synchronized to true. If any exception was thrown by
746 // runtime, exception handling i.e. unlock_if_synchronized_method will
747 // check this thread local flag.
748 // This flag has two effects, one is to force an unwind in the topmost
749 // interpreter frame and not perform an unlock while doing so.
751 __ movbool(true, G3_scratch);
752 __ stbool(G3_scratch, do_not_unlock_if_synchronized);
754 // increment invocation counter and check for overflow
755 //
756 // Note: checking for negative value instead of overflow
757 // so we have a 'sticky' overflow test (may be of
758 // importance as soon as we have true MT/MP)
759 Label invocation_counter_overflow;
760 Label Lcontinue;
761 if (inc_counter) {
762 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
764 }
765 __ bind(Lcontinue);
767 bang_stack_shadow_pages(true);
769 // reset the _do_not_unlock_if_synchronized flag
770 __ stbool(G0, do_not_unlock_if_synchronized);
772 // check for synchronized methods
773 // Must happen AFTER invocation_counter check and stack overflow check,
774 // so method is not locked if overflows.
776 if (synchronized) {
777 lock_method();
778 } else {
779 #ifdef ASSERT
780 { Label ok;
781 __ ld(Laccess_flags, O0);
782 __ btst(JVM_ACC_SYNCHRONIZED, O0);
783 __ br( Assembler::zero, false, Assembler::pt, ok);
784 __ delayed()->nop();
785 __ stop("method needs synchronization");
786 __ bind(ok);
787 }
788 #endif // ASSERT
789 }
792 // start execution
793 __ verify_thread();
795 // JVMTI support
796 __ notify_method_entry();
798 // native call
800 // (note that O0 is never an oop--at most it is a handle)
801 // It is important not to smash any handles created by this call,
802 // until any oop handle in O0 is dereferenced.
804 // (note that the space for outgoing params is preallocated)
806 // get signature handler
807 { Label L;
808 __ ld_ptr(Address(Lmethod, 0, in_bytes(methodOopDesc::signature_handler_offset())), G3_scratch);
809 __ tst(G3_scratch);
810 __ brx(Assembler::notZero, false, Assembler::pt, L);
811 __ delayed()->nop();
812 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), Lmethod);
813 __ ld_ptr(Address(Lmethod, 0, in_bytes(methodOopDesc::signature_handler_offset())), G3_scratch);
814 __ bind(L);
815 }
817 // Push a new frame so that the args will really be stored in
818 // Copy a few locals across so the new frame has the variables
819 // we need but these values will be dead at the jni call and
820 // therefore not gc volatile like the values in the current
821 // frame (Lmethod in particular)
823 // Flush the method pointer to the register save area
824 __ st_ptr(Lmethod, SP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS);
825 __ mov(Llocals, O1);
826 // calculate where the mirror handle body is allocated in the interpreter frame:
828 Address mirror(FP, 0, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS);
829 __ add(mirror, O2);
831 // Calculate current frame size
832 __ sub(SP, FP, O3); // Calculate negative of current frame size
833 __ save(SP, O3, SP); // Allocate an identical sized frame
835 // Note I7 has leftover trash. Slow signature handler will fill it in
836 // should we get there. Normal jni call will set reasonable last_Java_pc
837 // below (and fix I7 so the stack trace doesn't have a meaningless frame
838 // in it).
840 // Load interpreter frame's Lmethod into same register here
842 __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
844 __ mov(I1, Llocals);
845 __ mov(I2, Lscratch2); // save the address of the mirror
848 // ONLY Lmethod and Llocals are valid here!
850 // call signature handler, It will move the arg properly since Llocals in current frame
851 // matches that in outer frame
853 __ callr(G3_scratch, 0);
854 __ delayed()->nop();
856 // Result handler is in Lscratch
858 // Reload interpreter frame's Lmethod since slow signature handler may block
859 __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
861 { Label not_static;
863 __ ld(Laccess_flags, O0);
864 __ btst(JVM_ACC_STATIC, O0);
865 __ br( Assembler::zero, false, Assembler::pt, not_static);
866 __ delayed()->
867 // get native function entry point(O0 is a good temp until the very end)
868 ld_ptr(Address(Lmethod, 0, in_bytes(methodOopDesc::native_function_offset())), O0);
869 // for static methods insert the mirror argument
870 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
872 __ ld_ptr(Address(Lmethod, 0, in_bytes(methodOopDesc:: constants_offset())), O1);
873 __ ld_ptr(Address(O1, 0, constantPoolOopDesc::pool_holder_offset_in_bytes()), O1);
874 __ ld_ptr(O1, mirror_offset, O1);
875 #ifdef ASSERT
876 if (!PrintSignatureHandlers) // do not dirty the output with this
877 { Label L;
878 __ tst(O1);
879 __ brx(Assembler::notZero, false, Assembler::pt, L);
880 __ delayed()->nop();
881 __ stop("mirror is missing");
882 __ bind(L);
883 }
884 #endif // ASSERT
885 __ st_ptr(O1, Lscratch2, 0);
886 __ mov(Lscratch2, O1);
887 __ bind(not_static);
888 }
890 // At this point, arguments have been copied off of stack into
891 // their JNI positions, which are O1..O5 and SP[68..].
892 // Oops are boxed in-place on the stack, with handles copied to arguments.
893 // The result handler is in Lscratch. O0 will shortly hold the JNIEnv*.
895 #ifdef ASSERT
896 { Label L;
897 __ tst(O0);
898 __ brx(Assembler::notZero, false, Assembler::pt, L);
899 __ delayed()->nop();
900 __ stop("native entry point is missing");
901 __ bind(L);
902 }
903 #endif // ASSERT
905 //
906 // setup the frame anchor
907 //
908 // The scavenge function only needs to know that the PC of this frame is
909 // in the interpreter method entry code, it doesn't need to know the exact
910 // PC and hence we can use O7 which points to the return address from the
911 // previous call in the code stream (signature handler function)
912 //
913 // The other trick is we set last_Java_sp to FP instead of the usual SP because
914 // we have pushed the extra frame in order to protect the volatile register(s)
915 // in that frame when we return from the jni call
916 //
918 __ set_last_Java_frame(FP, O7);
919 __ mov(O7, I7); // make dummy interpreter frame look like one above,
920 // not meaningless information that'll confuse me.
922 // flush the windows now. We don't care about the current (protection) frame
923 // only the outer frames
925 __ flush_windows();
927 // mark windows as flushed
928 Address flags(G2_thread,
929 0,
930 in_bytes(JavaThread::frame_anchor_offset()) + in_bytes(JavaFrameAnchor::flags_offset()));
931 __ set(JavaFrameAnchor::flushed, G3_scratch);
932 __ st(G3_scratch, flags);
934 // Transition from _thread_in_Java to _thread_in_native. We are already safepoint ready.
936 Address thread_state(G2_thread, 0, in_bytes(JavaThread::thread_state_offset()));
937 #ifdef ASSERT
938 { Label L;
939 __ ld(thread_state, G3_scratch);
940 __ cmp(G3_scratch, _thread_in_Java);
941 __ br(Assembler::equal, false, Assembler::pt, L);
942 __ delayed()->nop();
943 __ stop("Wrong thread state in native stub");
944 __ bind(L);
945 }
946 #endif // ASSERT
947 __ set(_thread_in_native, G3_scratch);
948 __ st(G3_scratch, thread_state);
950 // Call the jni method, using the delay slot to set the JNIEnv* argument.
951 __ save_thread(L7_thread_cache); // save Gthread
952 __ callr(O0, 0);
953 __ delayed()->
954 add(L7_thread_cache, in_bytes(JavaThread::jni_environment_offset()), O0);
956 // Back from jni method Lmethod in this frame is DEAD, DEAD, DEAD
958 __ restore_thread(L7_thread_cache); // restore G2_thread
959 __ reinit_heapbase();
961 // must we block?
963 // Block, if necessary, before resuming in _thread_in_Java state.
964 // In order for GC to work, don't clear the last_Java_sp until after blocking.
965 { Label no_block;
966 Address sync_state(G3_scratch, SafepointSynchronize::address_of_state());
968 // Switch thread to "native transition" state before reading the synchronization state.
969 // This additional state is necessary because reading and testing the synchronization
970 // state is not atomic w.r.t. GC, as this scenario demonstrates:
971 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
972 // VM thread changes sync state to synchronizing and suspends threads for GC.
973 // Thread A is resumed to finish this native method, but doesn't block here since it
974 // didn't see any synchronization is progress, and escapes.
975 __ set(_thread_in_native_trans, G3_scratch);
976 __ st(G3_scratch, thread_state);
977 if(os::is_MP()) {
978 if (UseMembar) {
979 // Force this write out before the read below
980 __ membar(Assembler::StoreLoad);
981 } else {
982 // Write serialization page so VM thread can do a pseudo remote membar.
983 // We use the current thread pointer to calculate a thread specific
984 // offset to write to within the page. This minimizes bus traffic
985 // due to cache line collision.
986 __ serialize_memory(G2_thread, G1_scratch, G3_scratch);
987 }
988 }
989 __ load_contents(sync_state, G3_scratch);
990 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
992 Label L;
993 Address suspend_state(G2_thread, 0, in_bytes(JavaThread::suspend_flags_offset()));
994 __ br(Assembler::notEqual, false, Assembler::pn, L);
995 __ delayed()->
996 ld(suspend_state, G3_scratch);
997 __ cmp(G3_scratch, 0);
998 __ br(Assembler::equal, false, Assembler::pt, no_block);
999 __ delayed()->nop();
1000 __ bind(L);
1002 // Block. Save any potential method result value before the operation and
1003 // use a leaf call to leave the last_Java_frame setup undisturbed.
1004 save_native_result();
1005 __ call_VM_leaf(L7_thread_cache,
1006 CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans),
1007 G2_thread);
1009 // Restore any method result value
1010 restore_native_result();
1011 __ bind(no_block);
1012 }
1014 // Clear the frame anchor now
1016 __ reset_last_Java_frame();
1018 // Move the result handler address
1019 __ mov(Lscratch, G3_scratch);
1020 // return possible result to the outer frame
1021 #ifndef __LP64
1022 __ mov(O0, I0);
1023 __ restore(O1, G0, O1);
1024 #else
1025 __ restore(O0, G0, O0);
1026 #endif /* __LP64 */
1028 // Move result handler to expected register
1029 __ mov(G3_scratch, Lscratch);
1031 // Back in normal (native) interpreter frame. State is thread_in_native_trans
1032 // switch to thread_in_Java.
1034 __ set(_thread_in_Java, G3_scratch);
1035 __ st(G3_scratch, thread_state);
1037 // reset handle block
1038 __ ld_ptr(G2_thread, in_bytes(JavaThread::active_handles_offset()), G3_scratch);
1039 __ st_ptr(G0, G3_scratch, JNIHandleBlock::top_offset_in_bytes());
1041 // If we have an oop result store it where it will be safe for any further gc
1042 // until we return now that we've released the handle it might be protected by
1044 {
1045 Label no_oop, store_result;
1047 __ set((intptr_t)AbstractInterpreter::result_handler(T_OBJECT), G3_scratch);
1048 __ cmp(G3_scratch, Lscratch);
1049 __ brx(Assembler::notEqual, false, Assembler::pt, no_oop);
1050 __ delayed()->nop();
1051 __ addcc(G0, O0, O0);
1052 __ brx(Assembler::notZero, true, Assembler::pt, store_result); // if result is not NULL:
1053 __ delayed()->ld_ptr(O0, 0, O0); // unbox it
1054 __ mov(G0, O0);
1056 __ bind(store_result);
1057 // Store it where gc will look for it and result handler expects it.
1058 __ st_ptr(O0, FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS);
1060 __ bind(no_oop);
1062 }
1065 // handle exceptions (exception handling will handle unlocking!)
1066 { Label L;
1067 Address exception_addr (G2_thread, 0, in_bytes(Thread::pending_exception_offset()));
1069 __ ld_ptr(exception_addr, Gtemp);
1070 __ tst(Gtemp);
1071 __ brx(Assembler::equal, false, Assembler::pt, L);
1072 __ delayed()->nop();
1073 // Note: This could be handled more efficiently since we know that the native
1074 // method doesn't have an exception handler. We could directly return
1075 // to the exception handler for the caller.
1076 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
1077 __ should_not_reach_here();
1078 __ bind(L);
1079 }
1081 // JVMTI support (preserves thread register)
1082 __ notify_method_exit(true, ilgl, InterpreterMacroAssembler::NotifyJVMTI);
1084 if (synchronized) {
1085 // save and restore any potential method result value around the unlocking operation
1086 save_native_result();
1088 __ add( __ top_most_monitor(), O1);
1089 __ unlock_object(O1);
1091 restore_native_result();
1092 }
1094 #if defined(COMPILER2) && !defined(_LP64)
1096 // C2 expects long results in G1 we can't tell if we're returning to interpreted
1097 // or compiled so just be safe.
1099 __ sllx(O0, 32, G1); // Shift bits into high G1
1100 __ srl (O1, 0, O1); // Zero extend O1
1101 __ or3 (O1, G1, G1); // OR 64 bits into G1
1103 #endif /* COMPILER2 && !_LP64 */
1105 // dispose of return address and remove activation
1106 #ifdef ASSERT
1107 {
1108 Label ok;
1109 __ cmp(I5_savedSP, FP);
1110 __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, ok);
1111 __ delayed()->nop();
1112 __ stop("bad I5_savedSP value");
1113 __ should_not_reach_here();
1114 __ bind(ok);
1115 }
1116 #endif
1117 if (TraceJumps) {
1118 // Move target to register that is recordable
1119 __ mov(Lscratch, G3_scratch);
1120 __ JMP(G3_scratch, 0);
1121 } else {
1122 __ jmp(Lscratch, 0);
1123 }
1124 __ delayed()->nop();
1127 if (inc_counter) {
1128 // handle invocation counter overflow
1129 __ bind(invocation_counter_overflow);
1130 generate_counter_overflow(Lcontinue);
1131 }
1135 return entry;
1136 }
1139 // Generic method entry to (asm) interpreter
1140 //------------------------------------------------------------------------------------------------------------------------
1141 //
1142 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1143 address entry = __ pc();
1145 bool inc_counter = UseCompiler || CountCompiledCalls;
1147 // the following temporary registers are used during frame creation
1148 const Register Gtmp1 = G3_scratch ;
1149 const Register Gtmp2 = G1_scratch;
1151 // make sure registers are different!
1152 assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
1154 const Address size_of_parameters(G5_method, 0, in_bytes(methodOopDesc::size_of_parameters_offset()));
1155 const Address size_of_locals (G5_method, 0, in_bytes(methodOopDesc::size_of_locals_offset()));
1156 // Seems like G5_method is live at the point this is used. So we could make this look consistent
1157 // and use in the asserts.
1158 const Address access_flags (Lmethod, 0, in_bytes(methodOopDesc::access_flags_offset()));
1160 __ verify_oop(G5_method);
1162 const Register Glocals_size = G3;
1163 assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
1165 // make sure method is not native & not abstract
1166 // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
1167 #ifdef ASSERT
1168 __ ld(G5_method, in_bytes(methodOopDesc::access_flags_offset()), Gtmp1);
1169 {
1170 Label L;
1171 __ btst(JVM_ACC_NATIVE, Gtmp1);
1172 __ br(Assembler::zero, false, Assembler::pt, L);
1173 __ delayed()->nop();
1174 __ stop("tried to execute native method as non-native");
1175 __ bind(L);
1176 }
1177 { Label L;
1178 __ btst(JVM_ACC_ABSTRACT, Gtmp1);
1179 __ br(Assembler::zero, false, Assembler::pt, L);
1180 __ delayed()->nop();
1181 __ stop("tried to execute abstract method as non-abstract");
1182 __ bind(L);
1183 }
1184 #endif // ASSERT
1186 // generate the code to allocate the interpreter stack frame
1188 generate_fixed_frame(false);
1190 #ifdef FAST_DISPATCH
1191 __ set((intptr_t)Interpreter::dispatch_table(), IdispatchTables);
1192 // set bytecode dispatch table base
1193 #endif
1195 //
1196 // Code to initialize the extra (i.e. non-parm) locals
1197 //
1198 Register init_value = noreg; // will be G0 if we must clear locals
1199 // The way the code was setup before zerolocals was always true for vanilla java entries.
1200 // It could only be false for the specialized entries like accessor or empty which have
1201 // no extra locals so the testing was a waste of time and the extra locals were always
1202 // initialized. We removed this extra complication to already over complicated code.
1204 init_value = G0;
1205 Label clear_loop;
1207 // NOTE: If you change the frame layout, this code will need to
1208 // be updated!
1209 __ lduh( size_of_locals, O2 );
1210 __ lduh( size_of_parameters, O1 );
1211 __ sll( O2, Interpreter::logStackElementSize(), O2);
1212 __ sll( O1, Interpreter::logStackElementSize(), O1 );
1213 __ sub( Llocals, O2, O2 );
1214 __ sub( Llocals, O1, O1 );
1216 __ bind( clear_loop );
1217 __ inc( O2, wordSize );
1219 __ cmp( O2, O1 );
1220 __ brx( Assembler::lessEqualUnsigned, true, Assembler::pt, clear_loop );
1221 __ delayed()->st_ptr( init_value, O2, 0 );
1223 const Address do_not_unlock_if_synchronized(G2_thread, 0,
1224 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1225 // Since at this point in the method invocation the exception handler
1226 // would try to exit the monitor of synchronized methods which hasn't
1227 // been entered yet, we set the thread local variable
1228 // _do_not_unlock_if_synchronized to true. If any exception was thrown by
1229 // runtime, exception handling i.e. unlock_if_synchronized_method will
1230 // check this thread local flag.
1231 __ movbool(true, G3_scratch);
1232 __ stbool(G3_scratch, do_not_unlock_if_synchronized);
1234 // increment invocation counter and check for overflow
1235 //
1236 // Note: checking for negative value instead of overflow
1237 // so we have a 'sticky' overflow test (may be of
1238 // importance as soon as we have true MT/MP)
1239 Label invocation_counter_overflow;
1240 Label profile_method;
1241 Label profile_method_continue;
1242 Label Lcontinue;
1243 if (inc_counter) {
1244 generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue);
1245 if (ProfileInterpreter) {
1246 __ bind(profile_method_continue);
1247 }
1248 }
1249 __ bind(Lcontinue);
1251 bang_stack_shadow_pages(false);
1253 // reset the _do_not_unlock_if_synchronized flag
1254 __ stbool(G0, do_not_unlock_if_synchronized);
1256 // check for synchronized methods
1257 // Must happen AFTER invocation_counter check and stack overflow check,
1258 // so method is not locked if overflows.
1260 if (synchronized) {
1261 lock_method();
1262 } else {
1263 #ifdef ASSERT
1264 { Label ok;
1265 __ ld(access_flags, O0);
1266 __ btst(JVM_ACC_SYNCHRONIZED, O0);
1267 __ br( Assembler::zero, false, Assembler::pt, ok);
1268 __ delayed()->nop();
1269 __ stop("method needs synchronization");
1270 __ bind(ok);
1271 }
1272 #endif // ASSERT
1273 }
1275 // start execution
1277 __ verify_thread();
1279 // jvmti support
1280 __ notify_method_entry();
1282 // start executing instructions
1283 __ dispatch_next(vtos);
1286 if (inc_counter) {
1287 if (ProfileInterpreter) {
1288 // We have decided to profile this method in the interpreter
1289 __ bind(profile_method);
1291 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method), Lbcp, true);
1293 #ifdef ASSERT
1294 __ tst(O0);
1295 __ breakpoint_trap(Assembler::notEqual);
1296 #endif
1298 __ set_method_data_pointer();
1300 __ ba(false, profile_method_continue);
1301 __ delayed()->nop();
1302 }
1304 // handle invocation counter overflow
1305 __ bind(invocation_counter_overflow);
1306 generate_counter_overflow(Lcontinue);
1307 }
1310 return entry;
1311 }
1314 //----------------------------------------------------------------------------------------------------
1315 // Entry points & stack frame layout
1316 //
1317 // Here we generate the various kind of entries into the interpreter.
1318 // The two main entry type are generic bytecode methods and native call method.
1319 // These both come in synchronized and non-synchronized versions but the
1320 // frame layout they create is very similar. The other method entry
1321 // types are really just special purpose entries that are really entry
1322 // and interpretation all in one. These are for trivial methods like
1323 // accessor, empty, or special math methods.
1324 //
1325 // When control flow reaches any of the entry types for the interpreter
1326 // the following holds ->
1327 //
1328 // C2 Calling Conventions:
1329 //
1330 // The entry code below assumes that the following registers are set
1331 // when coming in:
1332 // G5_method: holds the methodOop of the method to call
1333 // Lesp: points to the TOS of the callers expression stack
1334 // after having pushed all the parameters
1335 //
1336 // The entry code does the following to setup an interpreter frame
1337 // pop parameters from the callers stack by adjusting Lesp
1338 // set O0 to Lesp
1339 // compute X = (max_locals - num_parameters)
1340 // bump SP up by X to accomadate the extra locals
1341 // compute X = max_expression_stack
1342 // + vm_local_words
1343 // + 16 words of register save area
1344 // save frame doing a save sp, -X, sp growing towards lower addresses
1345 // set Lbcp, Lmethod, LcpoolCache
1346 // set Llocals to i0
1347 // set Lmonitors to FP - rounded_vm_local_words
1348 // set Lesp to Lmonitors - 4
1349 //
1350 // The frame has now been setup to do the rest of the entry code
1352 // Try this optimization: Most method entries could live in a
1353 // "one size fits all" stack frame without all the dynamic size
1354 // calculations. It might be profitable to do all this calculation
1355 // statically and approximately for "small enough" methods.
1357 //-----------------------------------------------------------------------------------------------
1359 // C1 Calling conventions
1360 //
1361 // Upon method entry, the following registers are setup:
1362 //
1363 // g2 G2_thread: current thread
1364 // g5 G5_method: method to activate
1365 // g4 Gargs : pointer to last argument
1366 //
1367 //
1368 // Stack:
1369 //
1370 // +---------------+ <--- sp
1371 // | |
1372 // : reg save area :
1373 // | |
1374 // +---------------+ <--- sp + 0x40
1375 // | |
1376 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1377 // | |
1378 // +---------------+ <--- sp + 0x5c
1379 // | |
1380 // : free :
1381 // | |
1382 // +---------------+ <--- Gargs
1383 // | |
1384 // : arguments :
1385 // | |
1386 // +---------------+
1387 // | |
1388 //
1389 //
1390 //
1391 // AFTER FRAME HAS BEEN SETUP for method interpretation the stack looks like:
1392 //
1393 // +---------------+ <--- sp
1394 // | |
1395 // : reg save area :
1396 // | |
1397 // +---------------+ <--- sp + 0x40
1398 // | |
1399 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1400 // | |
1401 // +---------------+ <--- sp + 0x5c
1402 // | |
1403 // : :
1404 // | | <--- Lesp
1405 // +---------------+ <--- Lmonitors (fp - 0x18)
1406 // | VM locals |
1407 // +---------------+ <--- fp
1408 // | |
1409 // : reg save area :
1410 // | |
1411 // +---------------+ <--- fp + 0x40
1412 // | |
1413 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1414 // | |
1415 // +---------------+ <--- fp + 0x5c
1416 // | |
1417 // : free :
1418 // | |
1419 // +---------------+
1420 // | |
1421 // : nonarg locals :
1422 // | |
1423 // +---------------+
1424 // | |
1425 // : arguments :
1426 // | | <--- Llocals
1427 // +---------------+ <--- Gargs
1428 // | |
1430 static int size_activation_helper(int callee_extra_locals, int max_stack, int monitor_size) {
1432 // Figure out the size of an interpreter frame (in words) given that we have a fully allocated
1433 // expression stack, the callee will have callee_extra_locals (so we can account for
1434 // frame extension) and monitor_size for monitors. Basically we need to calculate
1435 // this exactly like generate_fixed_frame/generate_compute_interpreter_state.
1436 //
1437 //
1438 // The big complicating thing here is that we must ensure that the stack stays properly
1439 // aligned. This would be even uglier if monitor size wasn't modulo what the stack
1440 // needs to be aligned for). We are given that the sp (fp) is already aligned by
1441 // the caller so we must ensure that it is properly aligned for our callee.
1442 //
1443 const int rounded_vm_local_words =
1444 round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
1445 // callee_locals and max_stack are counts, not the size in frame.
1446 const int locals_size =
1447 round_to(callee_extra_locals * Interpreter::stackElementWords(), WordsPerLong);
1448 const int max_stack_words = max_stack * Interpreter::stackElementWords();
1449 return (round_to((max_stack_words
1450 + rounded_vm_local_words
1451 + frame::memory_parameter_word_sp_offset), WordsPerLong)
1452 // already rounded
1453 + locals_size + monitor_size);
1454 }
1456 // How much stack a method top interpreter activation needs in words.
1457 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1459 // See call_stub code
1460 int call_stub_size = round_to(7 + frame::memory_parameter_word_sp_offset,
1461 WordsPerLong); // 7 + register save area
1463 // Save space for one monitor to get into the interpreted method in case
1464 // the method is synchronized
1465 int monitor_size = method->is_synchronized() ?
1466 1*frame::interpreter_frame_monitor_size() : 0;
1467 return size_activation_helper(method->max_locals(), method->max_stack(),
1468 monitor_size) + call_stub_size;
1469 }
1471 int AbstractInterpreter::layout_activation(methodOop method,
1472 int tempcount,
1473 int popframe_extra_args,
1474 int moncount,
1475 int callee_param_count,
1476 int callee_local_count,
1477 frame* caller,
1478 frame* interpreter_frame,
1479 bool is_top_frame) {
1480 // Note: This calculation must exactly parallel the frame setup
1481 // in InterpreterGenerator::generate_fixed_frame.
1482 // If f!=NULL, set up the following variables:
1483 // - Lmethod
1484 // - Llocals
1485 // - Lmonitors (to the indicated number of monitors)
1486 // - Lesp (to the indicated number of temps)
1487 // The frame f (if not NULL) on entry is a description of the caller of the frame
1488 // we are about to layout. We are guaranteed that we will be able to fill in a
1489 // new interpreter frame as its callee (i.e. the stack space is allocated and
1490 // the amount was determined by an earlier call to this method with f == NULL).
1491 // On return f (if not NULL) while describe the interpreter frame we just layed out.
1493 int monitor_size = moncount * frame::interpreter_frame_monitor_size();
1494 int rounded_vm_local_words = round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
1496 assert(monitor_size == round_to(monitor_size, WordsPerLong), "must align");
1497 //
1498 // Note: if you look closely this appears to be doing something much different
1499 // than generate_fixed_frame. What is happening is this. On sparc we have to do
1500 // this dance with interpreter_sp_adjustment because the window save area would
1501 // appear just below the bottom (tos) of the caller's java expression stack. Because
1502 // the interpreter want to have the locals completely contiguous generate_fixed_frame
1503 // will adjust the caller's sp for the "extra locals" (max_locals - parameter_size).
1504 // Now in generate_fixed_frame the extension of the caller's sp happens in the callee.
1505 // In this code the opposite occurs the caller adjusts it's own stack base on the callee.
1506 // This is mostly ok but it does cause a problem when we get to the initial frame (the oldest)
1507 // because the oldest frame would have adjust its callers frame and yet that frame
1508 // already exists and isn't part of this array of frames we are unpacking. So at first
1509 // glance this would seem to mess up that frame. However Deoptimization::fetch_unroll_info_helper()
1510 // will after it calculates all of the frame's on_stack_size()'s will then figure out the
1511 // amount to adjust the caller of the initial (oldest) frame and the calculation will all
1512 // add up. It does seem like it simpler to account for the adjustment here (and remove the
1513 // callee... parameters here). However this would mean that this routine would have to take
1514 // the caller frame as input so we could adjust its sp (and set it's interpreter_sp_adjustment)
1515 // and run the calling loop in the reverse order. This would also would appear to mean making
1516 // this code aware of what the interactions are when that initial caller fram was an osr or
1517 // other adapter frame. deoptimization is complicated enough and hard enough to debug that
1518 // there is no sense in messing working code.
1519 //
1521 int rounded_cls = round_to((callee_local_count - callee_param_count), WordsPerLong);
1522 assert(rounded_cls == round_to(rounded_cls, WordsPerLong), "must align");
1524 int raw_frame_size = size_activation_helper(rounded_cls, method->max_stack(),
1525 monitor_size);
1527 if (interpreter_frame != NULL) {
1528 // The skeleton frame must already look like an interpreter frame
1529 // even if not fully filled out.
1530 assert(interpreter_frame->is_interpreted_frame(), "Must be interpreted frame");
1532 intptr_t* fp = interpreter_frame->fp();
1534 JavaThread* thread = JavaThread::current();
1535 RegisterMap map(thread, false);
1536 // More verification that skeleton frame is properly walkable
1537 assert(fp == caller->sp(), "fp must match");
1539 intptr_t* montop = fp - rounded_vm_local_words;
1541 // preallocate monitors (cf. __ add_monitor_to_stack)
1542 intptr_t* monitors = montop - monitor_size;
1544 // preallocate stack space
1545 intptr_t* esp = monitors - 1 -
1546 (tempcount * Interpreter::stackElementWords()) -
1547 popframe_extra_args;
1549 int local_words = method->max_locals() * Interpreter::stackElementWords();
1550 int parm_words = method->size_of_parameters() * Interpreter::stackElementWords();
1551 NEEDS_CLEANUP;
1552 intptr_t* locals;
1553 if (caller->is_interpreted_frame()) {
1554 // Can force the locals area to end up properly overlapping the top of the expression stack.
1555 intptr_t* Lesp_ptr = caller->interpreter_frame_tos_address() - 1;
1556 // Note that this computation means we replace size_of_parameters() values from the caller
1557 // interpreter frame's expression stack with our argument locals
1558 locals = Lesp_ptr + parm_words;
1559 int delta = local_words - parm_words;
1560 int computed_sp_adjustment = (delta > 0) ? round_to(delta, WordsPerLong) : 0;
1561 *interpreter_frame->register_addr(I5_savedSP) = (intptr_t) (fp + computed_sp_adjustment) - STACK_BIAS;
1562 } else {
1563 assert(caller->is_compiled_frame() || caller->is_entry_frame(), "only possible cases");
1564 // Don't have Lesp available; lay out locals block in the caller
1565 // adjacent to the register window save area.
1566 //
1567 // Compiled frames do not allocate a varargs area which is why this if
1568 // statement is needed.
1569 //
1570 if (caller->is_compiled_frame()) {
1571 locals = fp + frame::register_save_words + local_words - 1;
1572 } else {
1573 locals = fp + frame::memory_parameter_word_sp_offset + local_words - 1;
1574 }
1575 if (!caller->is_entry_frame()) {
1576 // Caller wants his own SP back
1577 int caller_frame_size = caller->cb()->frame_size();
1578 *interpreter_frame->register_addr(I5_savedSP) = (intptr_t)(caller->fp() - caller_frame_size) - STACK_BIAS;
1579 }
1580 }
1581 if (TraceDeoptimization) {
1582 if (caller->is_entry_frame()) {
1583 // make sure I5_savedSP and the entry frames notion of saved SP
1584 // agree. This assertion duplicate a check in entry frame code
1585 // but catches the failure earlier.
1586 assert(*caller->register_addr(Lscratch) == *interpreter_frame->register_addr(I5_savedSP),
1587 "would change callers SP");
1588 }
1589 if (caller->is_entry_frame()) {
1590 tty->print("entry ");
1591 }
1592 if (caller->is_compiled_frame()) {
1593 tty->print("compiled ");
1594 if (caller->is_deoptimized_frame()) {
1595 tty->print("(deopt) ");
1596 }
1597 }
1598 if (caller->is_interpreted_frame()) {
1599 tty->print("interpreted ");
1600 }
1601 tty->print_cr("caller fp=0x%x sp=0x%x", caller->fp(), caller->sp());
1602 tty->print_cr("save area = 0x%x, 0x%x", caller->sp(), caller->sp() + 16);
1603 tty->print_cr("save area = 0x%x, 0x%x", caller->fp(), caller->fp() + 16);
1604 tty->print_cr("interpreter fp=0x%x sp=0x%x", interpreter_frame->fp(), interpreter_frame->sp());
1605 tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->sp(), interpreter_frame->sp() + 16);
1606 tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->fp(), interpreter_frame->fp() + 16);
1607 tty->print_cr("Llocals = 0x%x", locals);
1608 tty->print_cr("Lesp = 0x%x", esp);
1609 tty->print_cr("Lmonitors = 0x%x", monitors);
1610 }
1612 if (method->max_locals() > 0) {
1613 assert(locals < caller->sp() || locals >= (caller->sp() + 16), "locals in save area");
1614 assert(locals < caller->fp() || locals > (caller->fp() + 16), "locals in save area");
1615 assert(locals < interpreter_frame->sp() || locals > (interpreter_frame->sp() + 16), "locals in save area");
1616 assert(locals < interpreter_frame->fp() || locals >= (interpreter_frame->fp() + 16), "locals in save area");
1617 }
1618 #ifdef _LP64
1619 assert(*interpreter_frame->register_addr(I5_savedSP) & 1, "must be odd");
1620 #endif
1622 *interpreter_frame->register_addr(Lmethod) = (intptr_t) method;
1623 *interpreter_frame->register_addr(Llocals) = (intptr_t) locals;
1624 *interpreter_frame->register_addr(Lmonitors) = (intptr_t) monitors;
1625 *interpreter_frame->register_addr(Lesp) = (intptr_t) esp;
1626 // Llast_SP will be same as SP as there is no adapter space
1627 *interpreter_frame->register_addr(Llast_SP) = (intptr_t) interpreter_frame->sp() - STACK_BIAS;
1628 *interpreter_frame->register_addr(LcpoolCache) = (intptr_t) method->constants()->cache();
1629 #ifdef FAST_DISPATCH
1630 *interpreter_frame->register_addr(IdispatchTables) = (intptr_t) Interpreter::dispatch_table();
1631 #endif
1634 #ifdef ASSERT
1635 BasicObjectLock* mp = (BasicObjectLock*)monitors;
1637 assert(interpreter_frame->interpreter_frame_method() == method, "method matches");
1638 assert(interpreter_frame->interpreter_frame_local_at(9) == (intptr_t *)((intptr_t)locals - (9 * Interpreter::stackElementSize())+Interpreter::value_offset_in_bytes()), "locals match");
1639 assert(interpreter_frame->interpreter_frame_monitor_end() == mp, "monitor_end matches");
1640 assert(((intptr_t *)interpreter_frame->interpreter_frame_monitor_begin()) == ((intptr_t *)mp)+monitor_size, "monitor_begin matches");
1641 assert(interpreter_frame->interpreter_frame_tos_address()-1 == esp, "esp matches");
1643 // check bounds
1644 intptr_t* lo = interpreter_frame->sp() + (frame::memory_parameter_word_sp_offset - 1);
1645 intptr_t* hi = interpreter_frame->fp() - rounded_vm_local_words;
1646 assert(lo < monitors && montop <= hi, "monitors in bounds");
1647 assert(lo <= esp && esp < monitors, "esp in bounds");
1648 #endif // ASSERT
1649 }
1651 return raw_frame_size;
1652 }
1654 //----------------------------------------------------------------------------------------------------
1655 // Exceptions
1656 void TemplateInterpreterGenerator::generate_throw_exception() {
1658 // Entry point in previous activation (i.e., if the caller was interpreted)
1659 Interpreter::_rethrow_exception_entry = __ pc();
1660 // O0: exception
1662 // entry point for exceptions thrown within interpreter code
1663 Interpreter::_throw_exception_entry = __ pc();
1664 __ verify_thread();
1665 // expression stack is undefined here
1666 // O0: exception, i.e. Oexception
1667 // Lbcp: exception bcx
1668 __ verify_oop(Oexception);
1671 // expression stack must be empty before entering the VM in case of an exception
1672 __ empty_expression_stack();
1673 // find exception handler address and preserve exception oop
1674 // call C routine to find handler and jump to it
1675 __ call_VM(O1, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), Oexception);
1676 __ push_ptr(O1); // push exception for exception handler bytecodes
1678 __ JMP(O0, 0); // jump to exception handler (may be remove activation entry!)
1679 __ delayed()->nop();
1682 // if the exception is not handled in the current frame
1683 // the frame is removed and the exception is rethrown
1684 // (i.e. exception continuation is _rethrow_exception)
1685 //
1686 // Note: At this point the bci is still the bxi for the instruction which caused
1687 // the exception and the expression stack is empty. Thus, for any VM calls
1688 // at this point, GC will find a legal oop map (with empty expression stack).
1690 // in current activation
1691 // tos: exception
1692 // Lbcp: exception bcp
1694 //
1695 // JVMTI PopFrame support
1696 //
1698 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1699 Address popframe_condition_addr (G2_thread, 0, in_bytes(JavaThread::popframe_condition_offset()));
1700 // Set the popframe_processing bit in popframe_condition indicating that we are
1701 // currently handling popframe, so that call_VMs that may happen later do not trigger new
1702 // popframe handling cycles.
1704 __ ld(popframe_condition_addr, G3_scratch);
1705 __ or3(G3_scratch, JavaThread::popframe_processing_bit, G3_scratch);
1706 __ stw(G3_scratch, popframe_condition_addr);
1708 // Empty the expression stack, as in normal exception handling
1709 __ empty_expression_stack();
1710 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, /* install_monitor_exception */ false);
1712 {
1713 // Check to see whether we are returning to a deoptimized frame.
1714 // (The PopFrame call ensures that the caller of the popped frame is
1715 // either interpreted or compiled and deoptimizes it if compiled.)
1716 // In this case, we can't call dispatch_next() after the frame is
1717 // popped, but instead must save the incoming arguments and restore
1718 // them after deoptimization has occurred.
1719 //
1720 // Note that we don't compare the return PC against the
1721 // deoptimization blob's unpack entry because of the presence of
1722 // adapter frames in C2.
1723 Label caller_not_deoptimized;
1724 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), I7);
1725 __ tst(O0);
1726 __ brx(Assembler::notEqual, false, Assembler::pt, caller_not_deoptimized);
1727 __ delayed()->nop();
1729 const Register Gtmp1 = G3_scratch;
1730 const Register Gtmp2 = G1_scratch;
1732 // Compute size of arguments for saving when returning to deoptimized caller
1733 __ lduh(Lmethod, in_bytes(methodOopDesc::size_of_parameters_offset()), Gtmp1);
1734 __ sll(Gtmp1, Interpreter::logStackElementSize(), Gtmp1);
1735 __ sub(Llocals, Gtmp1, Gtmp2);
1736 __ add(Gtmp2, wordSize, Gtmp2);
1737 // Save these arguments
1738 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), G2_thread, Gtmp1, Gtmp2);
1739 // Inform deoptimization that it is responsible for restoring these arguments
1740 __ set(JavaThread::popframe_force_deopt_reexecution_bit, Gtmp1);
1741 Address popframe_condition_addr(G2_thread, 0, in_bytes(JavaThread::popframe_condition_offset()));
1742 __ st(Gtmp1, popframe_condition_addr);
1744 // Return from the current method
1745 // The caller's SP was adjusted upon method entry to accomodate
1746 // the callee's non-argument locals. Undo that adjustment.
1747 __ ret();
1748 __ delayed()->restore(I5_savedSP, G0, SP);
1750 __ bind(caller_not_deoptimized);
1751 }
1753 // Clear the popframe condition flag
1754 __ stw(G0 /* popframe_inactive */, popframe_condition_addr);
1756 // Get out of the current method (how this is done depends on the particular compiler calling
1757 // convention that the interpreter currently follows)
1758 // The caller's SP was adjusted upon method entry to accomodate
1759 // the callee's non-argument locals. Undo that adjustment.
1760 __ restore(I5_savedSP, G0, SP);
1761 // The method data pointer was incremented already during
1762 // call profiling. We have to restore the mdp for the current bcp.
1763 if (ProfileInterpreter) {
1764 __ set_method_data_pointer_for_bcp();
1765 }
1766 // Resume bytecode interpretation at the current bcp
1767 __ dispatch_next(vtos);
1768 // end of JVMTI PopFrame support
1770 Interpreter::_remove_activation_entry = __ pc();
1772 // preserve exception over this code sequence (remove activation calls the vm, but oopmaps are not correct here)
1773 __ pop_ptr(Oexception); // get exception
1775 // Intel has the following comment:
1776 //// remove the activation (without doing throws on illegalMonitorExceptions)
1777 // They remove the activation without checking for bad monitor state.
1778 // %%% We should make sure this is the right semantics before implementing.
1780 // %%% changed set_vm_result_2 to set_vm_result and get_vm_result_2 to get_vm_result. Is there a bug here?
1781 __ set_vm_result(Oexception);
1782 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false);
1784 __ notify_method_exit(false, vtos, InterpreterMacroAssembler::SkipNotifyJVMTI);
1786 __ get_vm_result(Oexception);
1787 __ verify_oop(Oexception);
1789 const int return_reg_adjustment = frame::pc_return_offset;
1790 Address issuing_pc_addr(I7, 0, return_reg_adjustment);
1792 // We are done with this activation frame; find out where to go next.
1793 // The continuation point will be an exception handler, which expects
1794 // the following registers set up:
1795 //
1796 // Oexception: exception
1797 // Oissuing_pc: the local call that threw exception
1798 // Other On: garbage
1799 // In/Ln: the contents of the caller's register window
1800 //
1801 // We do the required restore at the last possible moment, because we
1802 // need to preserve some state across a runtime call.
1803 // (Remember that the caller activation is unknown--it might not be
1804 // interpreted, so things like Lscratch are useless in the caller.)
1806 // Although the Intel version uses call_C, we can use the more
1807 // compact call_VM. (The only real difference on SPARC is a
1808 // harmlessly ignored [re]set_last_Java_frame, compared with
1809 // the Intel code which lacks this.)
1810 __ mov(Oexception, Oexception ->after_save()); // get exception in I0 so it will be on O0 after restore
1811 __ add(issuing_pc_addr, Oissuing_pc->after_save()); // likewise set I1 to a value local to the caller
1812 __ super_call_VM_leaf(L7_thread_cache,
1813 CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address),
1814 Oissuing_pc->after_save());
1816 // The caller's SP was adjusted upon method entry to accomodate
1817 // the callee's non-argument locals. Undo that adjustment.
1818 __ JMP(O0, 0); // return exception handler in caller
1819 __ delayed()->restore(I5_savedSP, G0, SP);
1821 // (same old exception object is already in Oexception; see above)
1822 // Note that an "issuing PC" is actually the next PC after the call
1823 }
1826 //
1827 // JVMTI ForceEarlyReturn support
1828 //
1830 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1831 address entry = __ pc();
1833 __ empty_expression_stack();
1834 __ load_earlyret_value(state);
1836 __ ld_ptr(Address(G2_thread, 0, in_bytes(JavaThread::jvmti_thread_state_offset())), G3_scratch);
1837 Address cond_addr(G3_scratch, 0, in_bytes(JvmtiThreadState::earlyret_state_offset()));
1839 // Clear the earlyret state
1840 __ stw(G0 /* JvmtiThreadState::earlyret_inactive */, cond_addr);
1842 __ remove_activation(state,
1843 /* throw_monitor_exception */ false,
1844 /* install_monitor_exception */ false);
1846 // The caller's SP was adjusted upon method entry to accomodate
1847 // the callee's non-argument locals. Undo that adjustment.
1848 __ ret(); // return to caller
1849 __ delayed()->restore(I5_savedSP, G0, SP);
1851 return entry;
1852 } // end of JVMTI ForceEarlyReturn support
1855 //------------------------------------------------------------------------------------------------------------------------
1856 // Helper for vtos entry point generation
1858 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, address& bep, address& cep, address& sep, address& aep, address& iep, address& lep, address& fep, address& dep, address& vep) {
1859 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1860 Label L;
1861 aep = __ pc(); __ push_ptr(); __ ba(false, L); __ delayed()->nop();
1862 fep = __ pc(); __ push_f(); __ ba(false, L); __ delayed()->nop();
1863 dep = __ pc(); __ push_d(); __ ba(false, L); __ delayed()->nop();
1864 lep = __ pc(); __ push_l(); __ ba(false, L); __ delayed()->nop();
1865 iep = __ pc(); __ push_i();
1866 bep = cep = sep = iep; // there aren't any
1867 vep = __ pc(); __ bind(L); // fall through
1868 generate_and_dispatch(t);
1869 }
1871 // --------------------------------------------------------------------------------
1874 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1875 : TemplateInterpreterGenerator(code) {
1876 generate_all(); // down here so it can be "virtual"
1877 }
1879 // --------------------------------------------------------------------------------
1881 // Non-product code
1882 #ifndef PRODUCT
1883 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1884 address entry = __ pc();
1886 __ push(state);
1887 __ mov(O7, Lscratch); // protect return address within interpreter
1889 // Pass a 0 (not used in sparc) and the top of stack to the bytecode tracer
1890 __ mov( Otos_l2, G3_scratch );
1891 __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), G0, Otos_l1, G3_scratch);
1892 __ mov(Lscratch, O7); // restore return address
1893 __ pop(state);
1894 __ retl();
1895 __ delayed()->nop();
1897 return entry;
1898 }
1901 // helpers for generate_and_dispatch
1903 void TemplateInterpreterGenerator::count_bytecode() {
1904 Address c(G3_scratch, (address)&BytecodeCounter::_counter_value);
1905 __ load_contents(c, G4_scratch);
1906 __ inc(G4_scratch);
1907 __ st(G4_scratch, c);
1908 }
1911 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1912 Address bucket( G3_scratch, (address) &BytecodeHistogram::_counters[t->bytecode()] );
1913 __ load_contents(bucket, G4_scratch);
1914 __ inc(G4_scratch);
1915 __ st(G4_scratch, bucket);
1916 }
1919 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1920 address index_addr = (address)&BytecodePairHistogram::_index;
1921 Address index(G3_scratch, index_addr);
1923 address counters_addr = (address)&BytecodePairHistogram::_counters;
1924 Address counters(G3_scratch, counters_addr);
1926 // get index, shift out old bytecode, bring in new bytecode, and store it
1927 // _index = (_index >> log2_number_of_codes) |
1928 // (bytecode << log2_number_of_codes);
1931 __ load_contents( index, G4_scratch );
1932 __ srl( G4_scratch, BytecodePairHistogram::log2_number_of_codes, G4_scratch );
1933 __ set( ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes, G3_scratch );
1934 __ or3( G3_scratch, G4_scratch, G4_scratch );
1935 __ store_contents( G4_scratch, index );
1937 // bump bucket contents
1938 // _counters[_index] ++;
1940 __ load_address( counters ); // loads into G3_scratch
1941 __ sll( G4_scratch, LogBytesPerWord, G4_scratch ); // Index is word address
1942 __ add (G3_scratch, G4_scratch, G3_scratch); // Add in index
1943 __ ld (G3_scratch, 0, G4_scratch);
1944 __ inc (G4_scratch);
1945 __ st (G4_scratch, 0, G3_scratch);
1946 }
1949 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1950 // Call a little run-time stub to avoid blow-up for each bytecode.
1951 // The run-time runtime saves the right registers, depending on
1952 // the tosca in-state for the given template.
1953 address entry = Interpreter::trace_code(t->tos_in());
1954 guarantee(entry != NULL, "entry must have been generated");
1955 __ call(entry, relocInfo::none);
1956 __ delayed()->nop();
1957 }
1960 void TemplateInterpreterGenerator::stop_interpreter_at() {
1961 Address counter(G3_scratch , (address)&BytecodeCounter::_counter_value);
1962 __ load_contents (counter, G3_scratch );
1963 Address stop_at(G4_scratch, (address)&StopInterpreterAt);
1964 __ load_ptr_contents(stop_at, G4_scratch);
1965 __ cmp(G3_scratch, G4_scratch);
1966 __ breakpoint_trap(Assembler::equal);
1967 }
1968 #endif // not PRODUCT
1969 #endif // !CC_INTERP