Tue, 01 Apr 2014 09:36:49 +0200
8032410: compiler/uncommontrap/TestStackBangRbp.java times out on Solaris-Sparc V9
Summary: make compiled code bang the stack by the worst case size of the interpreter frame at deoptimization points.
Reviewed-by: twisti, kvn
1 /*
2 * Copyright (c) 2005, 2013, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "c1/c1_CFGPrinter.hpp"
27 #include "c1/c1_CodeStubs.hpp"
28 #include "c1/c1_Compilation.hpp"
29 #include "c1/c1_FrameMap.hpp"
30 #include "c1/c1_IR.hpp"
31 #include "c1/c1_LIRGenerator.hpp"
32 #include "c1/c1_LinearScan.hpp"
33 #include "c1/c1_ValueStack.hpp"
34 #include "utilities/bitMap.inline.hpp"
35 #ifdef TARGET_ARCH_x86
36 # include "vmreg_x86.inline.hpp"
37 #endif
38 #ifdef TARGET_ARCH_sparc
39 # include "vmreg_sparc.inline.hpp"
40 #endif
41 #ifdef TARGET_ARCH_zero
42 # include "vmreg_zero.inline.hpp"
43 #endif
44 #ifdef TARGET_ARCH_arm
45 # include "vmreg_arm.inline.hpp"
46 #endif
47 #ifdef TARGET_ARCH_ppc
48 # include "vmreg_ppc.inline.hpp"
49 #endif
52 #ifndef PRODUCT
54 static LinearScanStatistic _stat_before_alloc;
55 static LinearScanStatistic _stat_after_asign;
56 static LinearScanStatistic _stat_final;
58 static LinearScanTimers _total_timer;
60 // helper macro for short definition of timer
61 #define TIME_LINEAR_SCAN(timer_name) TraceTime _block_timer("", _total_timer.timer(LinearScanTimers::timer_name), TimeLinearScan || TimeEachLinearScan, Verbose);
63 // helper macro for short definition of trace-output inside code
64 #define TRACE_LINEAR_SCAN(level, code) \
65 if (TraceLinearScanLevel >= level) { \
66 code; \
67 }
69 #else
71 #define TIME_LINEAR_SCAN(timer_name)
72 #define TRACE_LINEAR_SCAN(level, code)
74 #endif
76 // Map BasicType to spill size in 32-bit words, matching VMReg's notion of words
77 #ifdef _LP64
78 static int type2spill_size[T_CONFLICT+1]={ -1, 0, 0, 0, 1, 1, 1, 2, 1, 1, 1, 2, 2, 2, 0, 2, 1, 2, 1, -1};
79 #else
80 static int type2spill_size[T_CONFLICT+1]={ -1, 0, 0, 0, 1, 1, 1, 2, 1, 1, 1, 2, 1, 1, 0, 1, -1, 1, 1, -1};
81 #endif
84 // Implementation of LinearScan
86 LinearScan::LinearScan(IR* ir, LIRGenerator* gen, FrameMap* frame_map)
87 : _compilation(ir->compilation())
88 , _ir(ir)
89 , _gen(gen)
90 , _frame_map(frame_map)
91 , _num_virtual_regs(gen->max_virtual_register_number())
92 , _has_fpu_registers(false)
93 , _num_calls(-1)
94 , _max_spills(0)
95 , _unused_spill_slot(-1)
96 , _intervals(0) // initialized later with correct length
97 , _new_intervals_from_allocation(new IntervalList())
98 , _sorted_intervals(NULL)
99 , _needs_full_resort(false)
100 , _lir_ops(0) // initialized later with correct length
101 , _block_of_op(0) // initialized later with correct length
102 , _has_info(0)
103 , _has_call(0)
104 , _scope_value_cache(0) // initialized later with correct length
105 , _interval_in_loop(0, 0) // initialized later with correct length
106 , _cached_blocks(*ir->linear_scan_order())
107 #ifdef X86
108 , _fpu_stack_allocator(NULL)
109 #endif
110 {
111 assert(this->ir() != NULL, "check if valid");
112 assert(this->compilation() != NULL, "check if valid");
113 assert(this->gen() != NULL, "check if valid");
114 assert(this->frame_map() != NULL, "check if valid");
115 }
118 // ********** functions for converting LIR-Operands to register numbers
119 //
120 // Emulate a flat register file comprising physical integer registers,
121 // physical floating-point registers and virtual registers, in that order.
122 // Virtual registers already have appropriate numbers, since V0 is
123 // the number of physical registers.
124 // Returns -1 for hi word if opr is a single word operand.
125 //
126 // Note: the inverse operation (calculating an operand for register numbers)
127 // is done in calc_operand_for_interval()
129 int LinearScan::reg_num(LIR_Opr opr) {
130 assert(opr->is_register(), "should not call this otherwise");
132 if (opr->is_virtual_register()) {
133 assert(opr->vreg_number() >= nof_regs, "found a virtual register with a fixed-register number");
134 return opr->vreg_number();
135 } else if (opr->is_single_cpu()) {
136 return opr->cpu_regnr();
137 } else if (opr->is_double_cpu()) {
138 return opr->cpu_regnrLo();
139 #ifdef X86
140 } else if (opr->is_single_xmm()) {
141 return opr->fpu_regnr() + pd_first_xmm_reg;
142 } else if (opr->is_double_xmm()) {
143 return opr->fpu_regnrLo() + pd_first_xmm_reg;
144 #endif
145 } else if (opr->is_single_fpu()) {
146 return opr->fpu_regnr() + pd_first_fpu_reg;
147 } else if (opr->is_double_fpu()) {
148 return opr->fpu_regnrLo() + pd_first_fpu_reg;
149 } else {
150 ShouldNotReachHere();
151 return -1;
152 }
153 }
155 int LinearScan::reg_numHi(LIR_Opr opr) {
156 assert(opr->is_register(), "should not call this otherwise");
158 if (opr->is_virtual_register()) {
159 return -1;
160 } else if (opr->is_single_cpu()) {
161 return -1;
162 } else if (opr->is_double_cpu()) {
163 return opr->cpu_regnrHi();
164 #ifdef X86
165 } else if (opr->is_single_xmm()) {
166 return -1;
167 } else if (opr->is_double_xmm()) {
168 return -1;
169 #endif
170 } else if (opr->is_single_fpu()) {
171 return -1;
172 } else if (opr->is_double_fpu()) {
173 return opr->fpu_regnrHi() + pd_first_fpu_reg;
174 } else {
175 ShouldNotReachHere();
176 return -1;
177 }
178 }
181 // ********** functions for classification of intervals
183 bool LinearScan::is_precolored_interval(const Interval* i) {
184 return i->reg_num() < LinearScan::nof_regs;
185 }
187 bool LinearScan::is_virtual_interval(const Interval* i) {
188 return i->reg_num() >= LIR_OprDesc::vreg_base;
189 }
191 bool LinearScan::is_precolored_cpu_interval(const Interval* i) {
192 return i->reg_num() < LinearScan::nof_cpu_regs;
193 }
195 bool LinearScan::is_virtual_cpu_interval(const Interval* i) {
196 #if defined(__SOFTFP__) || defined(E500V2)
197 return i->reg_num() >= LIR_OprDesc::vreg_base;
198 #else
199 return i->reg_num() >= LIR_OprDesc::vreg_base && (i->type() != T_FLOAT && i->type() != T_DOUBLE);
200 #endif // __SOFTFP__ or E500V2
201 }
203 bool LinearScan::is_precolored_fpu_interval(const Interval* i) {
204 return i->reg_num() >= LinearScan::nof_cpu_regs && i->reg_num() < LinearScan::nof_regs;
205 }
207 bool LinearScan::is_virtual_fpu_interval(const Interval* i) {
208 #if defined(__SOFTFP__) || defined(E500V2)
209 return false;
210 #else
211 return i->reg_num() >= LIR_OprDesc::vreg_base && (i->type() == T_FLOAT || i->type() == T_DOUBLE);
212 #endif // __SOFTFP__ or E500V2
213 }
215 bool LinearScan::is_in_fpu_register(const Interval* i) {
216 // fixed intervals not needed for FPU stack allocation
217 return i->reg_num() >= nof_regs && pd_first_fpu_reg <= i->assigned_reg() && i->assigned_reg() <= pd_last_fpu_reg;
218 }
220 bool LinearScan::is_oop_interval(const Interval* i) {
221 // fixed intervals never contain oops
222 return i->reg_num() >= nof_regs && i->type() == T_OBJECT;
223 }
226 // ********** General helper functions
228 // compute next unused stack index that can be used for spilling
229 int LinearScan::allocate_spill_slot(bool double_word) {
230 int spill_slot;
231 if (double_word) {
232 if ((_max_spills & 1) == 1) {
233 // alignment of double-word values
234 // the hole because of the alignment is filled with the next single-word value
235 assert(_unused_spill_slot == -1, "wasting a spill slot");
236 _unused_spill_slot = _max_spills;
237 _max_spills++;
238 }
239 spill_slot = _max_spills;
240 _max_spills += 2;
242 } else if (_unused_spill_slot != -1) {
243 // re-use hole that was the result of a previous double-word alignment
244 spill_slot = _unused_spill_slot;
245 _unused_spill_slot = -1;
247 } else {
248 spill_slot = _max_spills;
249 _max_spills++;
250 }
252 int result = spill_slot + LinearScan::nof_regs + frame_map()->argcount();
254 // the class OopMapValue uses only 11 bits for storing the name of the
255 // oop location. So a stack slot bigger than 2^11 leads to an overflow
256 // that is not reported in product builds. Prevent this by checking the
257 // spill slot here (altough this value and the later used location name
258 // are slightly different)
259 if (result > 2000) {
260 bailout("too many stack slots used");
261 }
263 return result;
264 }
266 void LinearScan::assign_spill_slot(Interval* it) {
267 // assign the canonical spill slot of the parent (if a part of the interval
268 // is already spilled) or allocate a new spill slot
269 if (it->canonical_spill_slot() >= 0) {
270 it->assign_reg(it->canonical_spill_slot());
271 } else {
272 int spill = allocate_spill_slot(type2spill_size[it->type()] == 2);
273 it->set_canonical_spill_slot(spill);
274 it->assign_reg(spill);
275 }
276 }
278 void LinearScan::propagate_spill_slots() {
279 if (!frame_map()->finalize_frame(max_spills())) {
280 bailout("frame too large");
281 }
282 }
284 // create a new interval with a predefined reg_num
285 // (only used for parent intervals that are created during the building phase)
286 Interval* LinearScan::create_interval(int reg_num) {
287 assert(_intervals.at(reg_num) == NULL, "overwriting exisiting interval");
289 Interval* interval = new Interval(reg_num);
290 _intervals.at_put(reg_num, interval);
292 // assign register number for precolored intervals
293 if (reg_num < LIR_OprDesc::vreg_base) {
294 interval->assign_reg(reg_num);
295 }
296 return interval;
297 }
299 // assign a new reg_num to the interval and append it to the list of intervals
300 // (only used for child intervals that are created during register allocation)
301 void LinearScan::append_interval(Interval* it) {
302 it->set_reg_num(_intervals.length());
303 _intervals.append(it);
304 _new_intervals_from_allocation->append(it);
305 }
307 // copy the vreg-flags if an interval is split
308 void LinearScan::copy_register_flags(Interval* from, Interval* to) {
309 if (gen()->is_vreg_flag_set(from->reg_num(), LIRGenerator::byte_reg)) {
310 gen()->set_vreg_flag(to->reg_num(), LIRGenerator::byte_reg);
311 }
312 if (gen()->is_vreg_flag_set(from->reg_num(), LIRGenerator::callee_saved)) {
313 gen()->set_vreg_flag(to->reg_num(), LIRGenerator::callee_saved);
314 }
316 // Note: do not copy the must_start_in_memory flag because it is not necessary for child
317 // intervals (only the very beginning of the interval must be in memory)
318 }
321 // ********** spill move optimization
322 // eliminate moves from register to stack if stack slot is known to be correct
324 // called during building of intervals
325 void LinearScan::change_spill_definition_pos(Interval* interval, int def_pos) {
326 assert(interval->is_split_parent(), "can only be called for split parents");
328 switch (interval->spill_state()) {
329 case noDefinitionFound:
330 assert(interval->spill_definition_pos() == -1, "must no be set before");
331 interval->set_spill_definition_pos(def_pos);
332 interval->set_spill_state(oneDefinitionFound);
333 break;
335 case oneDefinitionFound:
336 assert(def_pos <= interval->spill_definition_pos(), "positions are processed in reverse order when intervals are created");
337 if (def_pos < interval->spill_definition_pos() - 2) {
338 // second definition found, so no spill optimization possible for this interval
339 interval->set_spill_state(noOptimization);
340 } else {
341 // two consecutive definitions (because of two-operand LIR form)
342 assert(block_of_op_with_id(def_pos) == block_of_op_with_id(interval->spill_definition_pos()), "block must be equal");
343 }
344 break;
346 case noOptimization:
347 // nothing to do
348 break;
350 default:
351 assert(false, "other states not allowed at this time");
352 }
353 }
355 // called during register allocation
356 void LinearScan::change_spill_state(Interval* interval, int spill_pos) {
357 switch (interval->spill_state()) {
358 case oneDefinitionFound: {
359 int def_loop_depth = block_of_op_with_id(interval->spill_definition_pos())->loop_depth();
360 int spill_loop_depth = block_of_op_with_id(spill_pos)->loop_depth();
362 if (def_loop_depth < spill_loop_depth) {
363 // the loop depth of the spilling position is higher then the loop depth
364 // at the definition of the interval -> move write to memory out of loop
365 // by storing at definitin of the interval
366 interval->set_spill_state(storeAtDefinition);
367 } else {
368 // the interval is currently spilled only once, so for now there is no
369 // reason to store the interval at the definition
370 interval->set_spill_state(oneMoveInserted);
371 }
372 break;
373 }
375 case oneMoveInserted: {
376 // the interval is spilled more then once, so it is better to store it to
377 // memory at the definition
378 interval->set_spill_state(storeAtDefinition);
379 break;
380 }
382 case storeAtDefinition:
383 case startInMemory:
384 case noOptimization:
385 case noDefinitionFound:
386 // nothing to do
387 break;
389 default:
390 assert(false, "other states not allowed at this time");
391 }
392 }
395 bool LinearScan::must_store_at_definition(const Interval* i) {
396 return i->is_split_parent() && i->spill_state() == storeAtDefinition;
397 }
399 // called once before asignment of register numbers
400 void LinearScan::eliminate_spill_moves() {
401 TIME_LINEAR_SCAN(timer_eliminate_spill_moves);
402 TRACE_LINEAR_SCAN(3, tty->print_cr("***** Eliminating unnecessary spill moves"));
404 // collect all intervals that must be stored after their definion.
405 // the list is sorted by Interval::spill_definition_pos
406 Interval* interval;
407 Interval* temp_list;
408 create_unhandled_lists(&interval, &temp_list, must_store_at_definition, NULL);
410 #ifdef ASSERT
411 Interval* prev = NULL;
412 Interval* temp = interval;
413 while (temp != Interval::end()) {
414 assert(temp->spill_definition_pos() > 0, "invalid spill definition pos");
415 if (prev != NULL) {
416 assert(temp->from() >= prev->from(), "intervals not sorted");
417 assert(temp->spill_definition_pos() >= prev->spill_definition_pos(), "when intervals are sorted by from, then they must also be sorted by spill_definition_pos");
418 }
420 assert(temp->canonical_spill_slot() >= LinearScan::nof_regs, "interval has no spill slot assigned");
421 assert(temp->spill_definition_pos() >= temp->from(), "invalid order");
422 assert(temp->spill_definition_pos() <= temp->from() + 2, "only intervals defined once at their start-pos can be optimized");
424 TRACE_LINEAR_SCAN(4, tty->print_cr("interval %d (from %d to %d) must be stored at %d", temp->reg_num(), temp->from(), temp->to(), temp->spill_definition_pos()));
426 temp = temp->next();
427 }
428 #endif
430 LIR_InsertionBuffer insertion_buffer;
431 int num_blocks = block_count();
432 for (int i = 0; i < num_blocks; i++) {
433 BlockBegin* block = block_at(i);
434 LIR_OpList* instructions = block->lir()->instructions_list();
435 int num_inst = instructions->length();
436 bool has_new = false;
438 // iterate all instructions of the block. skip the first because it is always a label
439 for (int j = 1; j < num_inst; j++) {
440 LIR_Op* op = instructions->at(j);
441 int op_id = op->id();
443 if (op_id == -1) {
444 // remove move from register to stack if the stack slot is guaranteed to be correct.
445 // only moves that have been inserted by LinearScan can be removed.
446 assert(op->code() == lir_move, "only moves can have a op_id of -1");
447 assert(op->as_Op1() != NULL, "move must be LIR_Op1");
448 assert(op->as_Op1()->result_opr()->is_virtual(), "LinearScan inserts only moves to virtual registers");
450 LIR_Op1* op1 = (LIR_Op1*)op;
451 Interval* interval = interval_at(op1->result_opr()->vreg_number());
453 if (interval->assigned_reg() >= LinearScan::nof_regs && interval->always_in_memory()) {
454 // move target is a stack slot that is always correct, so eliminate instruction
455 TRACE_LINEAR_SCAN(4, tty->print_cr("eliminating move from interval %d to %d", op1->in_opr()->vreg_number(), op1->result_opr()->vreg_number()));
456 instructions->at_put(j, NULL); // NULL-instructions are deleted by assign_reg_num
457 }
459 } else {
460 // insert move from register to stack just after the beginning of the interval
461 assert(interval == Interval::end() || interval->spill_definition_pos() >= op_id, "invalid order");
462 assert(interval == Interval::end() || (interval->is_split_parent() && interval->spill_state() == storeAtDefinition), "invalid interval");
464 while (interval != Interval::end() && interval->spill_definition_pos() == op_id) {
465 if (!has_new) {
466 // prepare insertion buffer (appended when all instructions of the block are processed)
467 insertion_buffer.init(block->lir());
468 has_new = true;
469 }
471 LIR_Opr from_opr = operand_for_interval(interval);
472 LIR_Opr to_opr = canonical_spill_opr(interval);
473 assert(from_opr->is_fixed_cpu() || from_opr->is_fixed_fpu(), "from operand must be a register");
474 assert(to_opr->is_stack(), "to operand must be a stack slot");
476 insertion_buffer.move(j, from_opr, to_opr);
477 TRACE_LINEAR_SCAN(4, tty->print_cr("inserting move after definition of interval %d to stack slot %d at op_id %d", interval->reg_num(), interval->canonical_spill_slot() - LinearScan::nof_regs, op_id));
479 interval = interval->next();
480 }
481 }
482 } // end of instruction iteration
484 if (has_new) {
485 block->lir()->append(&insertion_buffer);
486 }
487 } // end of block iteration
489 assert(interval == Interval::end(), "missed an interval");
490 }
493 // ********** Phase 1: number all instructions in all blocks
494 // Compute depth-first and linear scan block orders, and number LIR_Op nodes for linear scan.
496 void LinearScan::number_instructions() {
497 {
498 // dummy-timer to measure the cost of the timer itself
499 // (this time is then subtracted from all other timers to get the real value)
500 TIME_LINEAR_SCAN(timer_do_nothing);
501 }
502 TIME_LINEAR_SCAN(timer_number_instructions);
504 // Assign IDs to LIR nodes and build a mapping, lir_ops, from ID to LIR_Op node.
505 int num_blocks = block_count();
506 int num_instructions = 0;
507 int i;
508 for (i = 0; i < num_blocks; i++) {
509 num_instructions += block_at(i)->lir()->instructions_list()->length();
510 }
512 // initialize with correct length
513 _lir_ops = LIR_OpArray(num_instructions);
514 _block_of_op = BlockBeginArray(num_instructions);
516 int op_id = 0;
517 int idx = 0;
519 for (i = 0; i < num_blocks; i++) {
520 BlockBegin* block = block_at(i);
521 block->set_first_lir_instruction_id(op_id);
522 LIR_OpList* instructions = block->lir()->instructions_list();
524 int num_inst = instructions->length();
525 for (int j = 0; j < num_inst; j++) {
526 LIR_Op* op = instructions->at(j);
527 op->set_id(op_id);
529 _lir_ops.at_put(idx, op);
530 _block_of_op.at_put(idx, block);
531 assert(lir_op_with_id(op_id) == op, "must match");
533 idx++;
534 op_id += 2; // numbering of lir_ops by two
535 }
536 block->set_last_lir_instruction_id(op_id - 2);
537 }
538 assert(idx == num_instructions, "must match");
539 assert(idx * 2 == op_id, "must match");
541 _has_call = BitMap(num_instructions); _has_call.clear();
542 _has_info = BitMap(num_instructions); _has_info.clear();
543 }
546 // ********** Phase 2: compute local live sets separately for each block
547 // (sets live_gen and live_kill for each block)
549 void LinearScan::set_live_gen_kill(Value value, LIR_Op* op, BitMap& live_gen, BitMap& live_kill) {
550 LIR_Opr opr = value->operand();
551 Constant* con = value->as_Constant();
553 // check some asumptions about debug information
554 assert(!value->type()->is_illegal(), "if this local is used by the interpreter it shouldn't be of indeterminate type");
555 assert(con == NULL || opr->is_virtual() || opr->is_constant() || opr->is_illegal(), "asumption: Constant instructions have only constant operands");
556 assert(con != NULL || opr->is_virtual(), "asumption: non-Constant instructions have only virtual operands");
558 if ((con == NULL || con->is_pinned()) && opr->is_register()) {
559 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
560 int reg = opr->vreg_number();
561 if (!live_kill.at(reg)) {
562 live_gen.set_bit(reg);
563 TRACE_LINEAR_SCAN(4, tty->print_cr(" Setting live_gen for value %c%d, LIR op_id %d, register number %d", value->type()->tchar(), value->id(), op->id(), reg));
564 }
565 }
566 }
569 void LinearScan::compute_local_live_sets() {
570 TIME_LINEAR_SCAN(timer_compute_local_live_sets);
572 int num_blocks = block_count();
573 int live_size = live_set_size();
574 bool local_has_fpu_registers = false;
575 int local_num_calls = 0;
576 LIR_OpVisitState visitor;
578 BitMap2D local_interval_in_loop = BitMap2D(_num_virtual_regs, num_loops());
579 local_interval_in_loop.clear();
581 // iterate all blocks
582 for (int i = 0; i < num_blocks; i++) {
583 BlockBegin* block = block_at(i);
585 BitMap live_gen(live_size); live_gen.clear();
586 BitMap live_kill(live_size); live_kill.clear();
588 if (block->is_set(BlockBegin::exception_entry_flag)) {
589 // Phi functions at the begin of an exception handler are
590 // implicitly defined (= killed) at the beginning of the block.
591 for_each_phi_fun(block, phi,
592 live_kill.set_bit(phi->operand()->vreg_number())
593 );
594 }
596 LIR_OpList* instructions = block->lir()->instructions_list();
597 int num_inst = instructions->length();
599 // iterate all instructions of the block. skip the first because it is always a label
600 assert(visitor.no_operands(instructions->at(0)), "first operation must always be a label");
601 for (int j = 1; j < num_inst; j++) {
602 LIR_Op* op = instructions->at(j);
604 // visit operation to collect all operands
605 visitor.visit(op);
607 if (visitor.has_call()) {
608 _has_call.set_bit(op->id() >> 1);
609 local_num_calls++;
610 }
611 if (visitor.info_count() > 0) {
612 _has_info.set_bit(op->id() >> 1);
613 }
615 // iterate input operands of instruction
616 int k, n, reg;
617 n = visitor.opr_count(LIR_OpVisitState::inputMode);
618 for (k = 0; k < n; k++) {
619 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::inputMode, k);
620 assert(opr->is_register(), "visitor should only return register operands");
622 if (opr->is_virtual_register()) {
623 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
624 reg = opr->vreg_number();
625 if (!live_kill.at(reg)) {
626 live_gen.set_bit(reg);
627 TRACE_LINEAR_SCAN(4, tty->print_cr(" Setting live_gen for register %d at instruction %d", reg, op->id()));
628 }
629 if (block->loop_index() >= 0) {
630 local_interval_in_loop.set_bit(reg, block->loop_index());
631 }
632 local_has_fpu_registers = local_has_fpu_registers || opr->is_virtual_fpu();
633 }
635 #ifdef ASSERT
636 // fixed intervals are never live at block boundaries, so
637 // they need not be processed in live sets.
638 // this is checked by these assertions to be sure about it.
639 // the entry block may have incoming values in registers, which is ok.
640 if (!opr->is_virtual_register() && block != ir()->start()) {
641 reg = reg_num(opr);
642 if (is_processed_reg_num(reg)) {
643 assert(live_kill.at(reg), "using fixed register that is not defined in this block");
644 }
645 reg = reg_numHi(opr);
646 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
647 assert(live_kill.at(reg), "using fixed register that is not defined in this block");
648 }
649 }
650 #endif
651 }
653 // Add uses of live locals from interpreter's point of view for proper debug information generation
654 n = visitor.info_count();
655 for (k = 0; k < n; k++) {
656 CodeEmitInfo* info = visitor.info_at(k);
657 ValueStack* stack = info->stack();
658 for_each_state_value(stack, value,
659 set_live_gen_kill(value, op, live_gen, live_kill)
660 );
661 }
663 // iterate temp operands of instruction
664 n = visitor.opr_count(LIR_OpVisitState::tempMode);
665 for (k = 0; k < n; k++) {
666 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::tempMode, k);
667 assert(opr->is_register(), "visitor should only return register operands");
669 if (opr->is_virtual_register()) {
670 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
671 reg = opr->vreg_number();
672 live_kill.set_bit(reg);
673 if (block->loop_index() >= 0) {
674 local_interval_in_loop.set_bit(reg, block->loop_index());
675 }
676 local_has_fpu_registers = local_has_fpu_registers || opr->is_virtual_fpu();
677 }
679 #ifdef ASSERT
680 // fixed intervals are never live at block boundaries, so
681 // they need not be processed in live sets
682 // process them only in debug mode so that this can be checked
683 if (!opr->is_virtual_register()) {
684 reg = reg_num(opr);
685 if (is_processed_reg_num(reg)) {
686 live_kill.set_bit(reg_num(opr));
687 }
688 reg = reg_numHi(opr);
689 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
690 live_kill.set_bit(reg);
691 }
692 }
693 #endif
694 }
696 // iterate output operands of instruction
697 n = visitor.opr_count(LIR_OpVisitState::outputMode);
698 for (k = 0; k < n; k++) {
699 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::outputMode, k);
700 assert(opr->is_register(), "visitor should only return register operands");
702 if (opr->is_virtual_register()) {
703 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
704 reg = opr->vreg_number();
705 live_kill.set_bit(reg);
706 if (block->loop_index() >= 0) {
707 local_interval_in_loop.set_bit(reg, block->loop_index());
708 }
709 local_has_fpu_registers = local_has_fpu_registers || opr->is_virtual_fpu();
710 }
712 #ifdef ASSERT
713 // fixed intervals are never live at block boundaries, so
714 // they need not be processed in live sets
715 // process them only in debug mode so that this can be checked
716 if (!opr->is_virtual_register()) {
717 reg = reg_num(opr);
718 if (is_processed_reg_num(reg)) {
719 live_kill.set_bit(reg_num(opr));
720 }
721 reg = reg_numHi(opr);
722 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
723 live_kill.set_bit(reg);
724 }
725 }
726 #endif
727 }
728 } // end of instruction iteration
730 block->set_live_gen (live_gen);
731 block->set_live_kill(live_kill);
732 block->set_live_in (BitMap(live_size)); block->live_in().clear();
733 block->set_live_out (BitMap(live_size)); block->live_out().clear();
735 TRACE_LINEAR_SCAN(4, tty->print("live_gen B%d ", block->block_id()); print_bitmap(block->live_gen()));
736 TRACE_LINEAR_SCAN(4, tty->print("live_kill B%d ", block->block_id()); print_bitmap(block->live_kill()));
737 } // end of block iteration
739 // propagate local calculated information into LinearScan object
740 _has_fpu_registers = local_has_fpu_registers;
741 compilation()->set_has_fpu_code(local_has_fpu_registers);
743 _num_calls = local_num_calls;
744 _interval_in_loop = local_interval_in_loop;
745 }
748 // ********** Phase 3: perform a backward dataflow analysis to compute global live sets
749 // (sets live_in and live_out for each block)
751 void LinearScan::compute_global_live_sets() {
752 TIME_LINEAR_SCAN(timer_compute_global_live_sets);
754 int num_blocks = block_count();
755 bool change_occurred;
756 bool change_occurred_in_block;
757 int iteration_count = 0;
758 BitMap live_out(live_set_size()); live_out.clear(); // scratch set for calculations
760 // Perform a backward dataflow analysis to compute live_out and live_in for each block.
761 // The loop is executed until a fixpoint is reached (no changes in an iteration)
762 // Exception handlers must be processed because not all live values are
763 // present in the state array, e.g. because of global value numbering
764 do {
765 change_occurred = false;
767 // iterate all blocks in reverse order
768 for (int i = num_blocks - 1; i >= 0; i--) {
769 BlockBegin* block = block_at(i);
771 change_occurred_in_block = false;
773 // live_out(block) is the union of live_in(sux), for successors sux of block
774 int n = block->number_of_sux();
775 int e = block->number_of_exception_handlers();
776 if (n + e > 0) {
777 // block has successors
778 if (n > 0) {
779 live_out.set_from(block->sux_at(0)->live_in());
780 for (int j = 1; j < n; j++) {
781 live_out.set_union(block->sux_at(j)->live_in());
782 }
783 } else {
784 live_out.clear();
785 }
786 for (int j = 0; j < e; j++) {
787 live_out.set_union(block->exception_handler_at(j)->live_in());
788 }
790 if (!block->live_out().is_same(live_out)) {
791 // A change occurred. Swap the old and new live out sets to avoid copying.
792 BitMap temp = block->live_out();
793 block->set_live_out(live_out);
794 live_out = temp;
796 change_occurred = true;
797 change_occurred_in_block = true;
798 }
799 }
801 if (iteration_count == 0 || change_occurred_in_block) {
802 // live_in(block) is the union of live_gen(block) with (live_out(block) & !live_kill(block))
803 // note: live_in has to be computed only in first iteration or if live_out has changed!
804 BitMap live_in = block->live_in();
805 live_in.set_from(block->live_out());
806 live_in.set_difference(block->live_kill());
807 live_in.set_union(block->live_gen());
808 }
810 #ifndef PRODUCT
811 if (TraceLinearScanLevel >= 4) {
812 char c = ' ';
813 if (iteration_count == 0 || change_occurred_in_block) {
814 c = '*';
815 }
816 tty->print("(%d) live_in%c B%d ", iteration_count, c, block->block_id()); print_bitmap(block->live_in());
817 tty->print("(%d) live_out%c B%d ", iteration_count, c, block->block_id()); print_bitmap(block->live_out());
818 }
819 #endif
820 }
821 iteration_count++;
823 if (change_occurred && iteration_count > 50) {
824 BAILOUT("too many iterations in compute_global_live_sets");
825 }
826 } while (change_occurred);
829 #ifdef ASSERT
830 // check that fixed intervals are not live at block boundaries
831 // (live set must be empty at fixed intervals)
832 for (int i = 0; i < num_blocks; i++) {
833 BlockBegin* block = block_at(i);
834 for (int j = 0; j < LIR_OprDesc::vreg_base; j++) {
835 assert(block->live_in().at(j) == false, "live_in set of fixed register must be empty");
836 assert(block->live_out().at(j) == false, "live_out set of fixed register must be empty");
837 assert(block->live_gen().at(j) == false, "live_gen set of fixed register must be empty");
838 }
839 }
840 #endif
842 // check that the live_in set of the first block is empty
843 BitMap live_in_args(ir()->start()->live_in().size());
844 live_in_args.clear();
845 if (!ir()->start()->live_in().is_same(live_in_args)) {
846 #ifdef ASSERT
847 tty->print_cr("Error: live_in set of first block must be empty (when this fails, virtual registers are used before they are defined)");
848 tty->print_cr("affected registers:");
849 print_bitmap(ir()->start()->live_in());
851 // print some additional information to simplify debugging
852 for (unsigned int i = 0; i < ir()->start()->live_in().size(); i++) {
853 if (ir()->start()->live_in().at(i)) {
854 Instruction* instr = gen()->instruction_for_vreg(i);
855 tty->print_cr("* vreg %d (HIR instruction %c%d)", i, instr == NULL ? ' ' : instr->type()->tchar(), instr == NULL ? 0 : instr->id());
857 for (int j = 0; j < num_blocks; j++) {
858 BlockBegin* block = block_at(j);
859 if (block->live_gen().at(i)) {
860 tty->print_cr(" used in block B%d", block->block_id());
861 }
862 if (block->live_kill().at(i)) {
863 tty->print_cr(" defined in block B%d", block->block_id());
864 }
865 }
866 }
867 }
869 #endif
870 // when this fails, virtual registers are used before they are defined.
871 assert(false, "live_in set of first block must be empty");
872 // bailout of if this occurs in product mode.
873 bailout("live_in set of first block not empty");
874 }
875 }
878 // ********** Phase 4: build intervals
879 // (fills the list _intervals)
881 void LinearScan::add_use(Value value, int from, int to, IntervalUseKind use_kind) {
882 assert(!value->type()->is_illegal(), "if this value is used by the interpreter it shouldn't be of indeterminate type");
883 LIR_Opr opr = value->operand();
884 Constant* con = value->as_Constant();
886 if ((con == NULL || con->is_pinned()) && opr->is_register()) {
887 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
888 add_use(opr, from, to, use_kind);
889 }
890 }
893 void LinearScan::add_def(LIR_Opr opr, int def_pos, IntervalUseKind use_kind) {
894 TRACE_LINEAR_SCAN(2, tty->print(" def "); opr->print(tty); tty->print_cr(" def_pos %d (%d)", def_pos, use_kind));
895 assert(opr->is_register(), "should not be called otherwise");
897 if (opr->is_virtual_register()) {
898 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
899 add_def(opr->vreg_number(), def_pos, use_kind, opr->type_register());
901 } else {
902 int reg = reg_num(opr);
903 if (is_processed_reg_num(reg)) {
904 add_def(reg, def_pos, use_kind, opr->type_register());
905 }
906 reg = reg_numHi(opr);
907 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
908 add_def(reg, def_pos, use_kind, opr->type_register());
909 }
910 }
911 }
913 void LinearScan::add_use(LIR_Opr opr, int from, int to, IntervalUseKind use_kind) {
914 TRACE_LINEAR_SCAN(2, tty->print(" use "); opr->print(tty); tty->print_cr(" from %d to %d (%d)", from, to, use_kind));
915 assert(opr->is_register(), "should not be called otherwise");
917 if (opr->is_virtual_register()) {
918 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
919 add_use(opr->vreg_number(), from, to, use_kind, opr->type_register());
921 } else {
922 int reg = reg_num(opr);
923 if (is_processed_reg_num(reg)) {
924 add_use(reg, from, to, use_kind, opr->type_register());
925 }
926 reg = reg_numHi(opr);
927 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
928 add_use(reg, from, to, use_kind, opr->type_register());
929 }
930 }
931 }
933 void LinearScan::add_temp(LIR_Opr opr, int temp_pos, IntervalUseKind use_kind) {
934 TRACE_LINEAR_SCAN(2, tty->print(" temp "); opr->print(tty); tty->print_cr(" temp_pos %d (%d)", temp_pos, use_kind));
935 assert(opr->is_register(), "should not be called otherwise");
937 if (opr->is_virtual_register()) {
938 assert(reg_num(opr) == opr->vreg_number() && !is_valid_reg_num(reg_numHi(opr)), "invalid optimization below");
939 add_temp(opr->vreg_number(), temp_pos, use_kind, opr->type_register());
941 } else {
942 int reg = reg_num(opr);
943 if (is_processed_reg_num(reg)) {
944 add_temp(reg, temp_pos, use_kind, opr->type_register());
945 }
946 reg = reg_numHi(opr);
947 if (is_valid_reg_num(reg) && is_processed_reg_num(reg)) {
948 add_temp(reg, temp_pos, use_kind, opr->type_register());
949 }
950 }
951 }
954 void LinearScan::add_def(int reg_num, int def_pos, IntervalUseKind use_kind, BasicType type) {
955 Interval* interval = interval_at(reg_num);
956 if (interval != NULL) {
957 assert(interval->reg_num() == reg_num, "wrong interval");
959 if (type != T_ILLEGAL) {
960 interval->set_type(type);
961 }
963 Range* r = interval->first();
964 if (r->from() <= def_pos) {
965 // Update the starting point (when a range is first created for a use, its
966 // start is the beginning of the current block until a def is encountered.)
967 r->set_from(def_pos);
968 interval->add_use_pos(def_pos, use_kind);
970 } else {
971 // Dead value - make vacuous interval
972 // also add use_kind for dead intervals
973 interval->add_range(def_pos, def_pos + 1);
974 interval->add_use_pos(def_pos, use_kind);
975 TRACE_LINEAR_SCAN(2, tty->print_cr("Warning: def of reg %d at %d occurs without use", reg_num, def_pos));
976 }
978 } else {
979 // Dead value - make vacuous interval
980 // also add use_kind for dead intervals
981 interval = create_interval(reg_num);
982 if (type != T_ILLEGAL) {
983 interval->set_type(type);
984 }
986 interval->add_range(def_pos, def_pos + 1);
987 interval->add_use_pos(def_pos, use_kind);
988 TRACE_LINEAR_SCAN(2, tty->print_cr("Warning: dead value %d at %d in live intervals", reg_num, def_pos));
989 }
991 change_spill_definition_pos(interval, def_pos);
992 if (use_kind == noUse && interval->spill_state() <= startInMemory) {
993 // detection of method-parameters and roundfp-results
994 // TODO: move this directly to position where use-kind is computed
995 interval->set_spill_state(startInMemory);
996 }
997 }
999 void LinearScan::add_use(int reg_num, int from, int to, IntervalUseKind use_kind, BasicType type) {
1000 Interval* interval = interval_at(reg_num);
1001 if (interval == NULL) {
1002 interval = create_interval(reg_num);
1003 }
1004 assert(interval->reg_num() == reg_num, "wrong interval");
1006 if (type != T_ILLEGAL) {
1007 interval->set_type(type);
1008 }
1010 interval->add_range(from, to);
1011 interval->add_use_pos(to, use_kind);
1012 }
1014 void LinearScan::add_temp(int reg_num, int temp_pos, IntervalUseKind use_kind, BasicType type) {
1015 Interval* interval = interval_at(reg_num);
1016 if (interval == NULL) {
1017 interval = create_interval(reg_num);
1018 }
1019 assert(interval->reg_num() == reg_num, "wrong interval");
1021 if (type != T_ILLEGAL) {
1022 interval->set_type(type);
1023 }
1025 interval->add_range(temp_pos, temp_pos + 1);
1026 interval->add_use_pos(temp_pos, use_kind);
1027 }
1030 // the results of this functions are used for optimizing spilling and reloading
1031 // if the functions return shouldHaveRegister and the interval is spilled,
1032 // it is not reloaded to a register.
1033 IntervalUseKind LinearScan::use_kind_of_output_operand(LIR_Op* op, LIR_Opr opr) {
1034 if (op->code() == lir_move) {
1035 assert(op->as_Op1() != NULL, "lir_move must be LIR_Op1");
1036 LIR_Op1* move = (LIR_Op1*)op;
1037 LIR_Opr res = move->result_opr();
1038 bool result_in_memory = res->is_virtual() && gen()->is_vreg_flag_set(res->vreg_number(), LIRGenerator::must_start_in_memory);
1040 if (result_in_memory) {
1041 // Begin of an interval with must_start_in_memory set.
1042 // This interval will always get a stack slot first, so return noUse.
1043 return noUse;
1045 } else if (move->in_opr()->is_stack()) {
1046 // method argument (condition must be equal to handle_method_arguments)
1047 return noUse;
1049 } else if (move->in_opr()->is_register() && move->result_opr()->is_register()) {
1050 // Move from register to register
1051 if (block_of_op_with_id(op->id())->is_set(BlockBegin::osr_entry_flag)) {
1052 // special handling of phi-function moves inside osr-entry blocks
1053 // input operand must have a register instead of output operand (leads to better register allocation)
1054 return shouldHaveRegister;
1055 }
1056 }
1057 }
1059 if (opr->is_virtual() &&
1060 gen()->is_vreg_flag_set(opr->vreg_number(), LIRGenerator::must_start_in_memory)) {
1061 // result is a stack-slot, so prevent immediate reloading
1062 return noUse;
1063 }
1065 // all other operands require a register
1066 return mustHaveRegister;
1067 }
1069 IntervalUseKind LinearScan::use_kind_of_input_operand(LIR_Op* op, LIR_Opr opr) {
1070 if (op->code() == lir_move) {
1071 assert(op->as_Op1() != NULL, "lir_move must be LIR_Op1");
1072 LIR_Op1* move = (LIR_Op1*)op;
1073 LIR_Opr res = move->result_opr();
1074 bool result_in_memory = res->is_virtual() && gen()->is_vreg_flag_set(res->vreg_number(), LIRGenerator::must_start_in_memory);
1076 if (result_in_memory) {
1077 // Move to an interval with must_start_in_memory set.
1078 // To avoid moves from stack to stack (not allowed) force the input operand to a register
1079 return mustHaveRegister;
1081 } else if (move->in_opr()->is_register() && move->result_opr()->is_register()) {
1082 // Move from register to register
1083 if (block_of_op_with_id(op->id())->is_set(BlockBegin::osr_entry_flag)) {
1084 // special handling of phi-function moves inside osr-entry blocks
1085 // input operand must have a register instead of output operand (leads to better register allocation)
1086 return mustHaveRegister;
1087 }
1089 // The input operand is not forced to a register (moves from stack to register are allowed),
1090 // but it is faster if the input operand is in a register
1091 return shouldHaveRegister;
1092 }
1093 }
1096 #ifdef X86
1097 if (op->code() == lir_cmove) {
1098 // conditional moves can handle stack operands
1099 assert(op->result_opr()->is_register(), "result must always be in a register");
1100 return shouldHaveRegister;
1101 }
1103 // optimizations for second input operand of arithmehtic operations on Intel
1104 // this operand is allowed to be on the stack in some cases
1105 BasicType opr_type = opr->type_register();
1106 if (opr_type == T_FLOAT || opr_type == T_DOUBLE) {
1107 if ((UseSSE == 1 && opr_type == T_FLOAT) || UseSSE >= 2) {
1108 // SSE float instruction (T_DOUBLE only supported with SSE2)
1109 switch (op->code()) {
1110 case lir_cmp:
1111 case lir_add:
1112 case lir_sub:
1113 case lir_mul:
1114 case lir_div:
1115 {
1116 assert(op->as_Op2() != NULL, "must be LIR_Op2");
1117 LIR_Op2* op2 = (LIR_Op2*)op;
1118 if (op2->in_opr1() != op2->in_opr2() && op2->in_opr2() == opr) {
1119 assert((op2->result_opr()->is_register() || op->code() == lir_cmp) && op2->in_opr1()->is_register(), "cannot mark second operand as stack if others are not in register");
1120 return shouldHaveRegister;
1121 }
1122 }
1123 }
1124 } else {
1125 // FPU stack float instruction
1126 switch (op->code()) {
1127 case lir_add:
1128 case lir_sub:
1129 case lir_mul:
1130 case lir_div:
1131 {
1132 assert(op->as_Op2() != NULL, "must be LIR_Op2");
1133 LIR_Op2* op2 = (LIR_Op2*)op;
1134 if (op2->in_opr1() != op2->in_opr2() && op2->in_opr2() == opr) {
1135 assert((op2->result_opr()->is_register() || op->code() == lir_cmp) && op2->in_opr1()->is_register(), "cannot mark second operand as stack if others are not in register");
1136 return shouldHaveRegister;
1137 }
1138 }
1139 }
1140 }
1141 // We want to sometimes use logical operations on pointers, in particular in GC barriers.
1142 // Since 64bit logical operations do not current support operands on stack, we have to make sure
1143 // T_OBJECT doesn't get spilled along with T_LONG.
1144 } else if (opr_type != T_LONG LP64_ONLY(&& opr_type != T_OBJECT)) {
1145 // integer instruction (note: long operands must always be in register)
1146 switch (op->code()) {
1147 case lir_cmp:
1148 case lir_add:
1149 case lir_sub:
1150 case lir_logic_and:
1151 case lir_logic_or:
1152 case lir_logic_xor:
1153 {
1154 assert(op->as_Op2() != NULL, "must be LIR_Op2");
1155 LIR_Op2* op2 = (LIR_Op2*)op;
1156 if (op2->in_opr1() != op2->in_opr2() && op2->in_opr2() == opr) {
1157 assert((op2->result_opr()->is_register() || op->code() == lir_cmp) && op2->in_opr1()->is_register(), "cannot mark second operand as stack if others are not in register");
1158 return shouldHaveRegister;
1159 }
1160 }
1161 }
1162 }
1163 #endif // X86
1165 // all other operands require a register
1166 return mustHaveRegister;
1167 }
1170 void LinearScan::handle_method_arguments(LIR_Op* op) {
1171 // special handling for method arguments (moves from stack to virtual register):
1172 // the interval gets no register assigned, but the stack slot.
1173 // it is split before the first use by the register allocator.
1175 if (op->code() == lir_move) {
1176 assert(op->as_Op1() != NULL, "must be LIR_Op1");
1177 LIR_Op1* move = (LIR_Op1*)op;
1179 if (move->in_opr()->is_stack()) {
1180 #ifdef ASSERT
1181 int arg_size = compilation()->method()->arg_size();
1182 LIR_Opr o = move->in_opr();
1183 if (o->is_single_stack()) {
1184 assert(o->single_stack_ix() >= 0 && o->single_stack_ix() < arg_size, "out of range");
1185 } else if (o->is_double_stack()) {
1186 assert(o->double_stack_ix() >= 0 && o->double_stack_ix() < arg_size, "out of range");
1187 } else {
1188 ShouldNotReachHere();
1189 }
1191 assert(move->id() > 0, "invalid id");
1192 assert(block_of_op_with_id(move->id())->number_of_preds() == 0, "move from stack must be in first block");
1193 assert(move->result_opr()->is_virtual(), "result of move must be a virtual register");
1195 TRACE_LINEAR_SCAN(4, tty->print_cr("found move from stack slot %d to vreg %d", o->is_single_stack() ? o->single_stack_ix() : o->double_stack_ix(), reg_num(move->result_opr())));
1196 #endif
1198 Interval* interval = interval_at(reg_num(move->result_opr()));
1200 int stack_slot = LinearScan::nof_regs + (move->in_opr()->is_single_stack() ? move->in_opr()->single_stack_ix() : move->in_opr()->double_stack_ix());
1201 interval->set_canonical_spill_slot(stack_slot);
1202 interval->assign_reg(stack_slot);
1203 }
1204 }
1205 }
1207 void LinearScan::handle_doubleword_moves(LIR_Op* op) {
1208 // special handling for doubleword move from memory to register:
1209 // in this case the registers of the input address and the result
1210 // registers must not overlap -> add a temp range for the input registers
1211 if (op->code() == lir_move) {
1212 assert(op->as_Op1() != NULL, "must be LIR_Op1");
1213 LIR_Op1* move = (LIR_Op1*)op;
1215 if (move->result_opr()->is_double_cpu() && move->in_opr()->is_pointer()) {
1216 LIR_Address* address = move->in_opr()->as_address_ptr();
1217 if (address != NULL) {
1218 if (address->base()->is_valid()) {
1219 add_temp(address->base(), op->id(), noUse);
1220 }
1221 if (address->index()->is_valid()) {
1222 add_temp(address->index(), op->id(), noUse);
1223 }
1224 }
1225 }
1226 }
1227 }
1229 void LinearScan::add_register_hints(LIR_Op* op) {
1230 switch (op->code()) {
1231 case lir_move: // fall through
1232 case lir_convert: {
1233 assert(op->as_Op1() != NULL, "lir_move, lir_convert must be LIR_Op1");
1234 LIR_Op1* move = (LIR_Op1*)op;
1236 LIR_Opr move_from = move->in_opr();
1237 LIR_Opr move_to = move->result_opr();
1239 if (move_to->is_register() && move_from->is_register()) {
1240 Interval* from = interval_at(reg_num(move_from));
1241 Interval* to = interval_at(reg_num(move_to));
1242 if (from != NULL && to != NULL) {
1243 to->set_register_hint(from);
1244 TRACE_LINEAR_SCAN(4, tty->print_cr("operation at op_id %d: added hint from interval %d to %d", move->id(), from->reg_num(), to->reg_num()));
1245 }
1246 }
1247 break;
1248 }
1249 case lir_cmove: {
1250 assert(op->as_Op2() != NULL, "lir_cmove must be LIR_Op2");
1251 LIR_Op2* cmove = (LIR_Op2*)op;
1253 LIR_Opr move_from = cmove->in_opr1();
1254 LIR_Opr move_to = cmove->result_opr();
1256 if (move_to->is_register() && move_from->is_register()) {
1257 Interval* from = interval_at(reg_num(move_from));
1258 Interval* to = interval_at(reg_num(move_to));
1259 if (from != NULL && to != NULL) {
1260 to->set_register_hint(from);
1261 TRACE_LINEAR_SCAN(4, tty->print_cr("operation at op_id %d: added hint from interval %d to %d", cmove->id(), from->reg_num(), to->reg_num()));
1262 }
1263 }
1264 break;
1265 }
1266 }
1267 }
1270 void LinearScan::build_intervals() {
1271 TIME_LINEAR_SCAN(timer_build_intervals);
1273 // initialize interval list with expected number of intervals
1274 // (32 is added to have some space for split children without having to resize the list)
1275 _intervals = IntervalList(num_virtual_regs() + 32);
1276 // initialize all slots that are used by build_intervals
1277 _intervals.at_put_grow(num_virtual_regs() - 1, NULL, NULL);
1279 // create a list with all caller-save registers (cpu, fpu, xmm)
1280 // when an instruction is a call, a temp range is created for all these registers
1281 int num_caller_save_registers = 0;
1282 int caller_save_registers[LinearScan::nof_regs];
1284 int i;
1285 for (i = 0; i < FrameMap::nof_caller_save_cpu_regs(); i++) {
1286 LIR_Opr opr = FrameMap::caller_save_cpu_reg_at(i);
1287 assert(opr->is_valid() && opr->is_register(), "FrameMap should not return invalid operands");
1288 assert(reg_numHi(opr) == -1, "missing addition of range for hi-register");
1289 caller_save_registers[num_caller_save_registers++] = reg_num(opr);
1290 }
1292 // temp ranges for fpu registers are only created when the method has
1293 // virtual fpu operands. Otherwise no allocation for fpu registers is
1294 // perfomed and so the temp ranges would be useless
1295 if (has_fpu_registers()) {
1296 #ifdef X86
1297 if (UseSSE < 2) {
1298 #endif
1299 for (i = 0; i < FrameMap::nof_caller_save_fpu_regs; i++) {
1300 LIR_Opr opr = FrameMap::caller_save_fpu_reg_at(i);
1301 assert(opr->is_valid() && opr->is_register(), "FrameMap should not return invalid operands");
1302 assert(reg_numHi(opr) == -1, "missing addition of range for hi-register");
1303 caller_save_registers[num_caller_save_registers++] = reg_num(opr);
1304 }
1305 #ifdef X86
1306 }
1307 if (UseSSE > 0) {
1308 for (i = 0; i < FrameMap::nof_caller_save_xmm_regs; i++) {
1309 LIR_Opr opr = FrameMap::caller_save_xmm_reg_at(i);
1310 assert(opr->is_valid() && opr->is_register(), "FrameMap should not return invalid operands");
1311 assert(reg_numHi(opr) == -1, "missing addition of range for hi-register");
1312 caller_save_registers[num_caller_save_registers++] = reg_num(opr);
1313 }
1314 }
1315 #endif
1316 }
1317 assert(num_caller_save_registers <= LinearScan::nof_regs, "out of bounds");
1320 LIR_OpVisitState visitor;
1322 // iterate all blocks in reverse order
1323 for (i = block_count() - 1; i >= 0; i--) {
1324 BlockBegin* block = block_at(i);
1325 LIR_OpList* instructions = block->lir()->instructions_list();
1326 int block_from = block->first_lir_instruction_id();
1327 int block_to = block->last_lir_instruction_id();
1329 assert(block_from == instructions->at(0)->id(), "must be");
1330 assert(block_to == instructions->at(instructions->length() - 1)->id(), "must be");
1332 // Update intervals for registers live at the end of this block;
1333 BitMap live = block->live_out();
1334 int size = (int)live.size();
1335 for (int number = (int)live.get_next_one_offset(0, size); number < size; number = (int)live.get_next_one_offset(number + 1, size)) {
1336 assert(live.at(number), "should not stop here otherwise");
1337 assert(number >= LIR_OprDesc::vreg_base, "fixed intervals must not be live on block bounds");
1338 TRACE_LINEAR_SCAN(2, tty->print_cr("live in %d to %d", number, block_to + 2));
1340 add_use(number, block_from, block_to + 2, noUse, T_ILLEGAL);
1342 // add special use positions for loop-end blocks when the
1343 // interval is used anywhere inside this loop. It's possible
1344 // that the block was part of a non-natural loop, so it might
1345 // have an invalid loop index.
1346 if (block->is_set(BlockBegin::linear_scan_loop_end_flag) &&
1347 block->loop_index() != -1 &&
1348 is_interval_in_loop(number, block->loop_index())) {
1349 interval_at(number)->add_use_pos(block_to + 1, loopEndMarker);
1350 }
1351 }
1353 // iterate all instructions of the block in reverse order.
1354 // skip the first instruction because it is always a label
1355 // definitions of intervals are processed before uses
1356 assert(visitor.no_operands(instructions->at(0)), "first operation must always be a label");
1357 for (int j = instructions->length() - 1; j >= 1; j--) {
1358 LIR_Op* op = instructions->at(j);
1359 int op_id = op->id();
1361 // visit operation to collect all operands
1362 visitor.visit(op);
1364 // add a temp range for each register if operation destroys caller-save registers
1365 if (visitor.has_call()) {
1366 for (int k = 0; k < num_caller_save_registers; k++) {
1367 add_temp(caller_save_registers[k], op_id, noUse, T_ILLEGAL);
1368 }
1369 TRACE_LINEAR_SCAN(4, tty->print_cr("operation destroys all caller-save registers"));
1370 }
1372 // Add any platform dependent temps
1373 pd_add_temps(op);
1375 // visit definitions (output and temp operands)
1376 int k, n;
1377 n = visitor.opr_count(LIR_OpVisitState::outputMode);
1378 for (k = 0; k < n; k++) {
1379 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::outputMode, k);
1380 assert(opr->is_register(), "visitor should only return register operands");
1381 add_def(opr, op_id, use_kind_of_output_operand(op, opr));
1382 }
1384 n = visitor.opr_count(LIR_OpVisitState::tempMode);
1385 for (k = 0; k < n; k++) {
1386 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::tempMode, k);
1387 assert(opr->is_register(), "visitor should only return register operands");
1388 add_temp(opr, op_id, mustHaveRegister);
1389 }
1391 // visit uses (input operands)
1392 n = visitor.opr_count(LIR_OpVisitState::inputMode);
1393 for (k = 0; k < n; k++) {
1394 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::inputMode, k);
1395 assert(opr->is_register(), "visitor should only return register operands");
1396 add_use(opr, block_from, op_id, use_kind_of_input_operand(op, opr));
1397 }
1399 // Add uses of live locals from interpreter's point of view for proper
1400 // debug information generation
1401 // Treat these operands as temp values (if the life range is extended
1402 // to a call site, the value would be in a register at the call otherwise)
1403 n = visitor.info_count();
1404 for (k = 0; k < n; k++) {
1405 CodeEmitInfo* info = visitor.info_at(k);
1406 ValueStack* stack = info->stack();
1407 for_each_state_value(stack, value,
1408 add_use(value, block_from, op_id + 1, noUse);
1409 );
1410 }
1412 // special steps for some instructions (especially moves)
1413 handle_method_arguments(op);
1414 handle_doubleword_moves(op);
1415 add_register_hints(op);
1417 } // end of instruction iteration
1418 } // end of block iteration
1421 // add the range [0, 1[ to all fixed intervals
1422 // -> the register allocator need not handle unhandled fixed intervals
1423 for (int n = 0; n < LinearScan::nof_regs; n++) {
1424 Interval* interval = interval_at(n);
1425 if (interval != NULL) {
1426 interval->add_range(0, 1);
1427 }
1428 }
1429 }
1432 // ********** Phase 5: actual register allocation
1434 int LinearScan::interval_cmp(Interval** a, Interval** b) {
1435 if (*a != NULL) {
1436 if (*b != NULL) {
1437 return (*a)->from() - (*b)->from();
1438 } else {
1439 return -1;
1440 }
1441 } else {
1442 if (*b != NULL) {
1443 return 1;
1444 } else {
1445 return 0;
1446 }
1447 }
1448 }
1450 #ifndef PRODUCT
1451 bool LinearScan::is_sorted(IntervalArray* intervals) {
1452 int from = -1;
1453 int i, j;
1454 for (i = 0; i < intervals->length(); i ++) {
1455 Interval* it = intervals->at(i);
1456 if (it != NULL) {
1457 if (from > it->from()) {
1458 assert(false, "");
1459 return false;
1460 }
1461 from = it->from();
1462 }
1463 }
1465 // check in both directions if sorted list and unsorted list contain same intervals
1466 for (i = 0; i < interval_count(); i++) {
1467 if (interval_at(i) != NULL) {
1468 int num_found = 0;
1469 for (j = 0; j < intervals->length(); j++) {
1470 if (interval_at(i) == intervals->at(j)) {
1471 num_found++;
1472 }
1473 }
1474 assert(num_found == 1, "lists do not contain same intervals");
1475 }
1476 }
1477 for (j = 0; j < intervals->length(); j++) {
1478 int num_found = 0;
1479 for (i = 0; i < interval_count(); i++) {
1480 if (interval_at(i) == intervals->at(j)) {
1481 num_found++;
1482 }
1483 }
1484 assert(num_found == 1, "lists do not contain same intervals");
1485 }
1487 return true;
1488 }
1489 #endif
1491 void LinearScan::add_to_list(Interval** first, Interval** prev, Interval* interval) {
1492 if (*prev != NULL) {
1493 (*prev)->set_next(interval);
1494 } else {
1495 *first = interval;
1496 }
1497 *prev = interval;
1498 }
1500 void LinearScan::create_unhandled_lists(Interval** list1, Interval** list2, bool (is_list1)(const Interval* i), bool (is_list2)(const Interval* i)) {
1501 assert(is_sorted(_sorted_intervals), "interval list is not sorted");
1503 *list1 = *list2 = Interval::end();
1505 Interval* list1_prev = NULL;
1506 Interval* list2_prev = NULL;
1507 Interval* v;
1509 const int n = _sorted_intervals->length();
1510 for (int i = 0; i < n; i++) {
1511 v = _sorted_intervals->at(i);
1512 if (v == NULL) continue;
1514 if (is_list1(v)) {
1515 add_to_list(list1, &list1_prev, v);
1516 } else if (is_list2 == NULL || is_list2(v)) {
1517 add_to_list(list2, &list2_prev, v);
1518 }
1519 }
1521 if (list1_prev != NULL) list1_prev->set_next(Interval::end());
1522 if (list2_prev != NULL) list2_prev->set_next(Interval::end());
1524 assert(list1_prev == NULL || list1_prev->next() == Interval::end(), "linear list ends not with sentinel");
1525 assert(list2_prev == NULL || list2_prev->next() == Interval::end(), "linear list ends not with sentinel");
1526 }
1529 void LinearScan::sort_intervals_before_allocation() {
1530 TIME_LINEAR_SCAN(timer_sort_intervals_before);
1532 if (_needs_full_resort) {
1533 // There is no known reason why this should occur but just in case...
1534 assert(false, "should never occur");
1535 // Re-sort existing interval list because an Interval::from() has changed
1536 _sorted_intervals->sort(interval_cmp);
1537 _needs_full_resort = false;
1538 }
1540 IntervalList* unsorted_list = &_intervals;
1541 int unsorted_len = unsorted_list->length();
1542 int sorted_len = 0;
1543 int unsorted_idx;
1544 int sorted_idx = 0;
1545 int sorted_from_max = -1;
1547 // calc number of items for sorted list (sorted list must not contain NULL values)
1548 for (unsorted_idx = 0; unsorted_idx < unsorted_len; unsorted_idx++) {
1549 if (unsorted_list->at(unsorted_idx) != NULL) {
1550 sorted_len++;
1551 }
1552 }
1553 IntervalArray* sorted_list = new IntervalArray(sorted_len);
1555 // special sorting algorithm: the original interval-list is almost sorted,
1556 // only some intervals are swapped. So this is much faster than a complete QuickSort
1557 for (unsorted_idx = 0; unsorted_idx < unsorted_len; unsorted_idx++) {
1558 Interval* cur_interval = unsorted_list->at(unsorted_idx);
1560 if (cur_interval != NULL) {
1561 int cur_from = cur_interval->from();
1563 if (sorted_from_max <= cur_from) {
1564 sorted_list->at_put(sorted_idx++, cur_interval);
1565 sorted_from_max = cur_interval->from();
1566 } else {
1567 // the asumption that the intervals are already sorted failed,
1568 // so this interval must be sorted in manually
1569 int j;
1570 for (j = sorted_idx - 1; j >= 0 && cur_from < sorted_list->at(j)->from(); j--) {
1571 sorted_list->at_put(j + 1, sorted_list->at(j));
1572 }
1573 sorted_list->at_put(j + 1, cur_interval);
1574 sorted_idx++;
1575 }
1576 }
1577 }
1578 _sorted_intervals = sorted_list;
1579 assert(is_sorted(_sorted_intervals), "intervals unsorted");
1580 }
1582 void LinearScan::sort_intervals_after_allocation() {
1583 TIME_LINEAR_SCAN(timer_sort_intervals_after);
1585 if (_needs_full_resort) {
1586 // Re-sort existing interval list because an Interval::from() has changed
1587 _sorted_intervals->sort(interval_cmp);
1588 _needs_full_resort = false;
1589 }
1591 IntervalArray* old_list = _sorted_intervals;
1592 IntervalList* new_list = _new_intervals_from_allocation;
1593 int old_len = old_list->length();
1594 int new_len = new_list->length();
1596 if (new_len == 0) {
1597 // no intervals have been added during allocation, so sorted list is already up to date
1598 assert(is_sorted(_sorted_intervals), "intervals unsorted");
1599 return;
1600 }
1602 // conventional sort-algorithm for new intervals
1603 new_list->sort(interval_cmp);
1605 // merge old and new list (both already sorted) into one combined list
1606 IntervalArray* combined_list = new IntervalArray(old_len + new_len);
1607 int old_idx = 0;
1608 int new_idx = 0;
1610 while (old_idx + new_idx < old_len + new_len) {
1611 if (new_idx >= new_len || (old_idx < old_len && old_list->at(old_idx)->from() <= new_list->at(new_idx)->from())) {
1612 combined_list->at_put(old_idx + new_idx, old_list->at(old_idx));
1613 old_idx++;
1614 } else {
1615 combined_list->at_put(old_idx + new_idx, new_list->at(new_idx));
1616 new_idx++;
1617 }
1618 }
1620 _sorted_intervals = combined_list;
1621 assert(is_sorted(_sorted_intervals), "intervals unsorted");
1622 }
1625 void LinearScan::allocate_registers() {
1626 TIME_LINEAR_SCAN(timer_allocate_registers);
1628 Interval* precolored_cpu_intervals, *not_precolored_cpu_intervals;
1629 Interval* precolored_fpu_intervals, *not_precolored_fpu_intervals;
1631 create_unhandled_lists(&precolored_cpu_intervals, ¬_precolored_cpu_intervals, is_precolored_cpu_interval, is_virtual_cpu_interval);
1632 if (has_fpu_registers()) {
1633 create_unhandled_lists(&precolored_fpu_intervals, ¬_precolored_fpu_intervals, is_precolored_fpu_interval, is_virtual_fpu_interval);
1634 #ifdef ASSERT
1635 } else {
1636 // fpu register allocation is omitted because no virtual fpu registers are present
1637 // just check this again...
1638 create_unhandled_lists(&precolored_fpu_intervals, ¬_precolored_fpu_intervals, is_precolored_fpu_interval, is_virtual_fpu_interval);
1639 assert(not_precolored_fpu_intervals == Interval::end(), "missed an uncolored fpu interval");
1640 #endif
1641 }
1643 // allocate cpu registers
1644 LinearScanWalker cpu_lsw(this, precolored_cpu_intervals, not_precolored_cpu_intervals);
1645 cpu_lsw.walk();
1646 cpu_lsw.finish_allocation();
1648 if (has_fpu_registers()) {
1649 // allocate fpu registers
1650 LinearScanWalker fpu_lsw(this, precolored_fpu_intervals, not_precolored_fpu_intervals);
1651 fpu_lsw.walk();
1652 fpu_lsw.finish_allocation();
1653 }
1654 }
1657 // ********** Phase 6: resolve data flow
1658 // (insert moves at edges between blocks if intervals have been split)
1660 // wrapper for Interval::split_child_at_op_id that performs a bailout in product mode
1661 // instead of returning NULL
1662 Interval* LinearScan::split_child_at_op_id(Interval* interval, int op_id, LIR_OpVisitState::OprMode mode) {
1663 Interval* result = interval->split_child_at_op_id(op_id, mode);
1664 if (result != NULL) {
1665 return result;
1666 }
1668 assert(false, "must find an interval, but do a clean bailout in product mode");
1669 result = new Interval(LIR_OprDesc::vreg_base);
1670 result->assign_reg(0);
1671 result->set_type(T_INT);
1672 BAILOUT_("LinearScan: interval is NULL", result);
1673 }
1676 Interval* LinearScan::interval_at_block_begin(BlockBegin* block, int reg_num) {
1677 assert(LinearScan::nof_regs <= reg_num && reg_num < num_virtual_regs(), "register number out of bounds");
1678 assert(interval_at(reg_num) != NULL, "no interval found");
1680 return split_child_at_op_id(interval_at(reg_num), block->first_lir_instruction_id(), LIR_OpVisitState::outputMode);
1681 }
1683 Interval* LinearScan::interval_at_block_end(BlockBegin* block, int reg_num) {
1684 assert(LinearScan::nof_regs <= reg_num && reg_num < num_virtual_regs(), "register number out of bounds");
1685 assert(interval_at(reg_num) != NULL, "no interval found");
1687 return split_child_at_op_id(interval_at(reg_num), block->last_lir_instruction_id() + 1, LIR_OpVisitState::outputMode);
1688 }
1690 Interval* LinearScan::interval_at_op_id(int reg_num, int op_id) {
1691 assert(LinearScan::nof_regs <= reg_num && reg_num < num_virtual_regs(), "register number out of bounds");
1692 assert(interval_at(reg_num) != NULL, "no interval found");
1694 return split_child_at_op_id(interval_at(reg_num), op_id, LIR_OpVisitState::inputMode);
1695 }
1698 void LinearScan::resolve_collect_mappings(BlockBegin* from_block, BlockBegin* to_block, MoveResolver &move_resolver) {
1699 DEBUG_ONLY(move_resolver.check_empty());
1701 const int num_regs = num_virtual_regs();
1702 const int size = live_set_size();
1703 const BitMap live_at_edge = to_block->live_in();
1705 // visit all registers where the live_at_edge bit is set
1706 for (int r = (int)live_at_edge.get_next_one_offset(0, size); r < size; r = (int)live_at_edge.get_next_one_offset(r + 1, size)) {
1707 assert(r < num_regs, "live information set for not exisiting interval");
1708 assert(from_block->live_out().at(r) && to_block->live_in().at(r), "interval not live at this edge");
1710 Interval* from_interval = interval_at_block_end(from_block, r);
1711 Interval* to_interval = interval_at_block_begin(to_block, r);
1713 if (from_interval != to_interval && (from_interval->assigned_reg() != to_interval->assigned_reg() || from_interval->assigned_regHi() != to_interval->assigned_regHi())) {
1714 // need to insert move instruction
1715 move_resolver.add_mapping(from_interval, to_interval);
1716 }
1717 }
1718 }
1721 void LinearScan::resolve_find_insert_pos(BlockBegin* from_block, BlockBegin* to_block, MoveResolver &move_resolver) {
1722 if (from_block->number_of_sux() <= 1) {
1723 TRACE_LINEAR_SCAN(4, tty->print_cr("inserting moves at end of from_block B%d", from_block->block_id()));
1725 LIR_OpList* instructions = from_block->lir()->instructions_list();
1726 LIR_OpBranch* branch = instructions->last()->as_OpBranch();
1727 if (branch != NULL) {
1728 // insert moves before branch
1729 assert(branch->cond() == lir_cond_always, "block does not end with an unconditional jump");
1730 move_resolver.set_insert_position(from_block->lir(), instructions->length() - 2);
1731 } else {
1732 move_resolver.set_insert_position(from_block->lir(), instructions->length() - 1);
1733 }
1735 } else {
1736 TRACE_LINEAR_SCAN(4, tty->print_cr("inserting moves at beginning of to_block B%d", to_block->block_id()));
1737 #ifdef ASSERT
1738 assert(from_block->lir()->instructions_list()->at(0)->as_OpLabel() != NULL, "block does not start with a label");
1740 // because the number of predecessor edges matches the number of
1741 // successor edges, blocks which are reached by switch statements
1742 // may have be more than one predecessor but it will be guaranteed
1743 // that all predecessors will be the same.
1744 for (int i = 0; i < to_block->number_of_preds(); i++) {
1745 assert(from_block == to_block->pred_at(i), "all critical edges must be broken");
1746 }
1747 #endif
1749 move_resolver.set_insert_position(to_block->lir(), 0);
1750 }
1751 }
1754 // insert necessary moves (spilling or reloading) at edges between blocks if interval has been split
1755 void LinearScan::resolve_data_flow() {
1756 TIME_LINEAR_SCAN(timer_resolve_data_flow);
1758 int num_blocks = block_count();
1759 MoveResolver move_resolver(this);
1760 BitMap block_completed(num_blocks); block_completed.clear();
1761 BitMap already_resolved(num_blocks); already_resolved.clear();
1763 int i;
1764 for (i = 0; i < num_blocks; i++) {
1765 BlockBegin* block = block_at(i);
1767 // check if block has only one predecessor and only one successor
1768 if (block->number_of_preds() == 1 && block->number_of_sux() == 1 && block->number_of_exception_handlers() == 0) {
1769 LIR_OpList* instructions = block->lir()->instructions_list();
1770 assert(instructions->at(0)->code() == lir_label, "block must start with label");
1771 assert(instructions->last()->code() == lir_branch, "block with successors must end with branch");
1772 assert(instructions->last()->as_OpBranch()->cond() == lir_cond_always, "block with successor must end with unconditional branch");
1774 // check if block is empty (only label and branch)
1775 if (instructions->length() == 2) {
1776 BlockBegin* pred = block->pred_at(0);
1777 BlockBegin* sux = block->sux_at(0);
1779 // prevent optimization of two consecutive blocks
1780 if (!block_completed.at(pred->linear_scan_number()) && !block_completed.at(sux->linear_scan_number())) {
1781 TRACE_LINEAR_SCAN(3, tty->print_cr("**** optimizing empty block B%d (pred: B%d, sux: B%d)", block->block_id(), pred->block_id(), sux->block_id()));
1782 block_completed.set_bit(block->linear_scan_number());
1784 // directly resolve between pred and sux (without looking at the empty block between)
1785 resolve_collect_mappings(pred, sux, move_resolver);
1786 if (move_resolver.has_mappings()) {
1787 move_resolver.set_insert_position(block->lir(), 0);
1788 move_resolver.resolve_and_append_moves();
1789 }
1790 }
1791 }
1792 }
1793 }
1796 for (i = 0; i < num_blocks; i++) {
1797 if (!block_completed.at(i)) {
1798 BlockBegin* from_block = block_at(i);
1799 already_resolved.set_from(block_completed);
1801 int num_sux = from_block->number_of_sux();
1802 for (int s = 0; s < num_sux; s++) {
1803 BlockBegin* to_block = from_block->sux_at(s);
1805 // check for duplicate edges between the same blocks (can happen with switch blocks)
1806 if (!already_resolved.at(to_block->linear_scan_number())) {
1807 TRACE_LINEAR_SCAN(3, tty->print_cr("**** processing edge between B%d and B%d", from_block->block_id(), to_block->block_id()));
1808 already_resolved.set_bit(to_block->linear_scan_number());
1810 // collect all intervals that have been split between from_block and to_block
1811 resolve_collect_mappings(from_block, to_block, move_resolver);
1812 if (move_resolver.has_mappings()) {
1813 resolve_find_insert_pos(from_block, to_block, move_resolver);
1814 move_resolver.resolve_and_append_moves();
1815 }
1816 }
1817 }
1818 }
1819 }
1820 }
1823 void LinearScan::resolve_exception_entry(BlockBegin* block, int reg_num, MoveResolver &move_resolver) {
1824 if (interval_at(reg_num) == NULL) {
1825 // if a phi function is never used, no interval is created -> ignore this
1826 return;
1827 }
1829 Interval* interval = interval_at_block_begin(block, reg_num);
1830 int reg = interval->assigned_reg();
1831 int regHi = interval->assigned_regHi();
1833 if ((reg < nof_regs && interval->always_in_memory()) ||
1834 (use_fpu_stack_allocation() && reg >= pd_first_fpu_reg && reg <= pd_last_fpu_reg)) {
1835 // the interval is split to get a short range that is located on the stack
1836 // in the following two cases:
1837 // * the interval started in memory (e.g. method parameter), but is currently in a register
1838 // this is an optimization for exception handling that reduces the number of moves that
1839 // are necessary for resolving the states when an exception uses this exception handler
1840 // * the interval would be on the fpu stack at the begin of the exception handler
1841 // this is not allowed because of the complicated fpu stack handling on Intel
1843 // range that will be spilled to memory
1844 int from_op_id = block->first_lir_instruction_id();
1845 int to_op_id = from_op_id + 1; // short live range of length 1
1846 assert(interval->from() <= from_op_id && interval->to() >= to_op_id,
1847 "no split allowed between exception entry and first instruction");
1849 if (interval->from() != from_op_id) {
1850 // the part before from_op_id is unchanged
1851 interval = interval->split(from_op_id);
1852 interval->assign_reg(reg, regHi);
1853 append_interval(interval);
1854 } else {
1855 _needs_full_resort = true;
1856 }
1857 assert(interval->from() == from_op_id, "must be true now");
1859 Interval* spilled_part = interval;
1860 if (interval->to() != to_op_id) {
1861 // the part after to_op_id is unchanged
1862 spilled_part = interval->split_from_start(to_op_id);
1863 append_interval(spilled_part);
1864 move_resolver.add_mapping(spilled_part, interval);
1865 }
1866 assign_spill_slot(spilled_part);
1868 assert(spilled_part->from() == from_op_id && spilled_part->to() == to_op_id, "just checking");
1869 }
1870 }
1872 void LinearScan::resolve_exception_entry(BlockBegin* block, MoveResolver &move_resolver) {
1873 assert(block->is_set(BlockBegin::exception_entry_flag), "should not call otherwise");
1874 DEBUG_ONLY(move_resolver.check_empty());
1876 // visit all registers where the live_in bit is set
1877 int size = live_set_size();
1878 for (int r = (int)block->live_in().get_next_one_offset(0, size); r < size; r = (int)block->live_in().get_next_one_offset(r + 1, size)) {
1879 resolve_exception_entry(block, r, move_resolver);
1880 }
1882 // the live_in bits are not set for phi functions of the xhandler entry, so iterate them separately
1883 for_each_phi_fun(block, phi,
1884 resolve_exception_entry(block, phi->operand()->vreg_number(), move_resolver)
1885 );
1887 if (move_resolver.has_mappings()) {
1888 // insert moves after first instruction
1889 move_resolver.set_insert_position(block->lir(), 0);
1890 move_resolver.resolve_and_append_moves();
1891 }
1892 }
1895 void LinearScan::resolve_exception_edge(XHandler* handler, int throwing_op_id, int reg_num, Phi* phi, MoveResolver &move_resolver) {
1896 if (interval_at(reg_num) == NULL) {
1897 // if a phi function is never used, no interval is created -> ignore this
1898 return;
1899 }
1901 // the computation of to_interval is equal to resolve_collect_mappings,
1902 // but from_interval is more complicated because of phi functions
1903 BlockBegin* to_block = handler->entry_block();
1904 Interval* to_interval = interval_at_block_begin(to_block, reg_num);
1906 if (phi != NULL) {
1907 // phi function of the exception entry block
1908 // no moves are created for this phi function in the LIR_Generator, so the
1909 // interval at the throwing instruction must be searched using the operands
1910 // of the phi function
1911 Value from_value = phi->operand_at(handler->phi_operand());
1913 // with phi functions it can happen that the same from_value is used in
1914 // multiple mappings, so notify move-resolver that this is allowed
1915 move_resolver.set_multiple_reads_allowed();
1917 Constant* con = from_value->as_Constant();
1918 if (con != NULL && !con->is_pinned()) {
1919 // unpinned constants may have no register, so add mapping from constant to interval
1920 move_resolver.add_mapping(LIR_OprFact::value_type(con->type()), to_interval);
1921 } else {
1922 // search split child at the throwing op_id
1923 Interval* from_interval = interval_at_op_id(from_value->operand()->vreg_number(), throwing_op_id);
1924 move_resolver.add_mapping(from_interval, to_interval);
1925 }
1927 } else {
1928 // no phi function, so use reg_num also for from_interval
1929 // search split child at the throwing op_id
1930 Interval* from_interval = interval_at_op_id(reg_num, throwing_op_id);
1931 if (from_interval != to_interval) {
1932 // optimization to reduce number of moves: when to_interval is on stack and
1933 // the stack slot is known to be always correct, then no move is necessary
1934 if (!from_interval->always_in_memory() || from_interval->canonical_spill_slot() != to_interval->assigned_reg()) {
1935 move_resolver.add_mapping(from_interval, to_interval);
1936 }
1937 }
1938 }
1939 }
1941 void LinearScan::resolve_exception_edge(XHandler* handler, int throwing_op_id, MoveResolver &move_resolver) {
1942 TRACE_LINEAR_SCAN(4, tty->print_cr("resolving exception handler B%d: throwing_op_id=%d", handler->entry_block()->block_id(), throwing_op_id));
1944 DEBUG_ONLY(move_resolver.check_empty());
1945 assert(handler->lir_op_id() == -1, "already processed this xhandler");
1946 DEBUG_ONLY(handler->set_lir_op_id(throwing_op_id));
1947 assert(handler->entry_code() == NULL, "code already present");
1949 // visit all registers where the live_in bit is set
1950 BlockBegin* block = handler->entry_block();
1951 int size = live_set_size();
1952 for (int r = (int)block->live_in().get_next_one_offset(0, size); r < size; r = (int)block->live_in().get_next_one_offset(r + 1, size)) {
1953 resolve_exception_edge(handler, throwing_op_id, r, NULL, move_resolver);
1954 }
1956 // the live_in bits are not set for phi functions of the xhandler entry, so iterate them separately
1957 for_each_phi_fun(block, phi,
1958 resolve_exception_edge(handler, throwing_op_id, phi->operand()->vreg_number(), phi, move_resolver)
1959 );
1961 if (move_resolver.has_mappings()) {
1962 LIR_List* entry_code = new LIR_List(compilation());
1963 move_resolver.set_insert_position(entry_code, 0);
1964 move_resolver.resolve_and_append_moves();
1966 entry_code->jump(handler->entry_block());
1967 handler->set_entry_code(entry_code);
1968 }
1969 }
1972 void LinearScan::resolve_exception_handlers() {
1973 MoveResolver move_resolver(this);
1974 LIR_OpVisitState visitor;
1975 int num_blocks = block_count();
1977 int i;
1978 for (i = 0; i < num_blocks; i++) {
1979 BlockBegin* block = block_at(i);
1980 if (block->is_set(BlockBegin::exception_entry_flag)) {
1981 resolve_exception_entry(block, move_resolver);
1982 }
1983 }
1985 for (i = 0; i < num_blocks; i++) {
1986 BlockBegin* block = block_at(i);
1987 LIR_List* ops = block->lir();
1988 int num_ops = ops->length();
1990 // iterate all instructions of the block. skip the first because it is always a label
1991 assert(visitor.no_operands(ops->at(0)), "first operation must always be a label");
1992 for (int j = 1; j < num_ops; j++) {
1993 LIR_Op* op = ops->at(j);
1994 int op_id = op->id();
1996 if (op_id != -1 && has_info(op_id)) {
1997 // visit operation to collect all operands
1998 visitor.visit(op);
1999 assert(visitor.info_count() > 0, "should not visit otherwise");
2001 XHandlers* xhandlers = visitor.all_xhandler();
2002 int n = xhandlers->length();
2003 for (int k = 0; k < n; k++) {
2004 resolve_exception_edge(xhandlers->handler_at(k), op_id, move_resolver);
2005 }
2007 #ifdef ASSERT
2008 } else {
2009 visitor.visit(op);
2010 assert(visitor.all_xhandler()->length() == 0, "missed exception handler");
2011 #endif
2012 }
2013 }
2014 }
2015 }
2018 // ********** Phase 7: assign register numbers back to LIR
2019 // (includes computation of debug information and oop maps)
2021 VMReg LinearScan::vm_reg_for_interval(Interval* interval) {
2022 VMReg reg = interval->cached_vm_reg();
2023 if (!reg->is_valid() ) {
2024 reg = vm_reg_for_operand(operand_for_interval(interval));
2025 interval->set_cached_vm_reg(reg);
2026 }
2027 assert(reg == vm_reg_for_operand(operand_for_interval(interval)), "wrong cached value");
2028 return reg;
2029 }
2031 VMReg LinearScan::vm_reg_for_operand(LIR_Opr opr) {
2032 assert(opr->is_oop(), "currently only implemented for oop operands");
2033 return frame_map()->regname(opr);
2034 }
2037 LIR_Opr LinearScan::operand_for_interval(Interval* interval) {
2038 LIR_Opr opr = interval->cached_opr();
2039 if (opr->is_illegal()) {
2040 opr = calc_operand_for_interval(interval);
2041 interval->set_cached_opr(opr);
2042 }
2044 assert(opr == calc_operand_for_interval(interval), "wrong cached value");
2045 return opr;
2046 }
2048 LIR_Opr LinearScan::calc_operand_for_interval(const Interval* interval) {
2049 int assigned_reg = interval->assigned_reg();
2050 BasicType type = interval->type();
2052 if (assigned_reg >= nof_regs) {
2053 // stack slot
2054 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2055 return LIR_OprFact::stack(assigned_reg - nof_regs, type);
2057 } else {
2058 // register
2059 switch (type) {
2060 case T_OBJECT: {
2061 assert(assigned_reg >= pd_first_cpu_reg && assigned_reg <= pd_last_cpu_reg, "no cpu register");
2062 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2063 return LIR_OprFact::single_cpu_oop(assigned_reg);
2064 }
2066 case T_ADDRESS: {
2067 assert(assigned_reg >= pd_first_cpu_reg && assigned_reg <= pd_last_cpu_reg, "no cpu register");
2068 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2069 return LIR_OprFact::single_cpu_address(assigned_reg);
2070 }
2072 case T_METADATA: {
2073 assert(assigned_reg >= pd_first_cpu_reg && assigned_reg <= pd_last_cpu_reg, "no cpu register");
2074 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2075 return LIR_OprFact::single_cpu_metadata(assigned_reg);
2076 }
2078 #ifdef __SOFTFP__
2079 case T_FLOAT: // fall through
2080 #endif // __SOFTFP__
2081 case T_INT: {
2082 assert(assigned_reg >= pd_first_cpu_reg && assigned_reg <= pd_last_cpu_reg, "no cpu register");
2083 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2084 return LIR_OprFact::single_cpu(assigned_reg);
2085 }
2087 #ifdef __SOFTFP__
2088 case T_DOUBLE: // fall through
2089 #endif // __SOFTFP__
2090 case T_LONG: {
2091 int assigned_regHi = interval->assigned_regHi();
2092 assert(assigned_reg >= pd_first_cpu_reg && assigned_reg <= pd_last_cpu_reg, "no cpu register");
2093 assert(num_physical_regs(T_LONG) == 1 ||
2094 (assigned_regHi >= pd_first_cpu_reg && assigned_regHi <= pd_last_cpu_reg), "no cpu register");
2096 assert(assigned_reg != assigned_regHi, "invalid allocation");
2097 assert(num_physical_regs(T_LONG) == 1 || assigned_reg < assigned_regHi,
2098 "register numbers must be sorted (ensure that e.g. a move from eax,ebx to ebx,eax can not occur)");
2099 assert((assigned_regHi != any_reg) ^ (num_physical_regs(T_LONG) == 1), "must be match");
2100 if (requires_adjacent_regs(T_LONG)) {
2101 assert(assigned_reg % 2 == 0 && assigned_reg + 1 == assigned_regHi, "must be sequential and even");
2102 }
2104 #ifdef _LP64
2105 return LIR_OprFact::double_cpu(assigned_reg, assigned_reg);
2106 #else
2107 #if defined(SPARC) || defined(PPC)
2108 return LIR_OprFact::double_cpu(assigned_regHi, assigned_reg);
2109 #else
2110 return LIR_OprFact::double_cpu(assigned_reg, assigned_regHi);
2111 #endif // SPARC
2112 #endif // LP64
2113 }
2115 #ifndef __SOFTFP__
2116 case T_FLOAT: {
2117 #ifdef X86
2118 if (UseSSE >= 1) {
2119 assert(assigned_reg >= pd_first_xmm_reg && assigned_reg <= pd_last_xmm_reg, "no xmm register");
2120 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2121 return LIR_OprFact::single_xmm(assigned_reg - pd_first_xmm_reg);
2122 }
2123 #endif
2125 assert(assigned_reg >= pd_first_fpu_reg && assigned_reg <= pd_last_fpu_reg, "no fpu register");
2126 assert(interval->assigned_regHi() == any_reg, "must not have hi register");
2127 return LIR_OprFact::single_fpu(assigned_reg - pd_first_fpu_reg);
2128 }
2130 case T_DOUBLE: {
2131 #ifdef X86
2132 if (UseSSE >= 2) {
2133 assert(assigned_reg >= pd_first_xmm_reg && assigned_reg <= pd_last_xmm_reg, "no xmm register");
2134 assert(interval->assigned_regHi() == any_reg, "must not have hi register (double xmm values are stored in one register)");
2135 return LIR_OprFact::double_xmm(assigned_reg - pd_first_xmm_reg);
2136 }
2137 #endif
2139 #ifdef SPARC
2140 assert(assigned_reg >= pd_first_fpu_reg && assigned_reg <= pd_last_fpu_reg, "no fpu register");
2141 assert(interval->assigned_regHi() >= pd_first_fpu_reg && interval->assigned_regHi() <= pd_last_fpu_reg, "no fpu register");
2142 assert(assigned_reg % 2 == 0 && assigned_reg + 1 == interval->assigned_regHi(), "must be sequential and even");
2143 LIR_Opr result = LIR_OprFact::double_fpu(interval->assigned_regHi() - pd_first_fpu_reg, assigned_reg - pd_first_fpu_reg);
2144 #elif defined(ARM)
2145 assert(assigned_reg >= pd_first_fpu_reg && assigned_reg <= pd_last_fpu_reg, "no fpu register");
2146 assert(interval->assigned_regHi() >= pd_first_fpu_reg && interval->assigned_regHi() <= pd_last_fpu_reg, "no fpu register");
2147 assert(assigned_reg % 2 == 0 && assigned_reg + 1 == interval->assigned_regHi(), "must be sequential and even");
2148 LIR_Opr result = LIR_OprFact::double_fpu(assigned_reg - pd_first_fpu_reg, interval->assigned_regHi() - pd_first_fpu_reg);
2149 #else
2150 assert(assigned_reg >= pd_first_fpu_reg && assigned_reg <= pd_last_fpu_reg, "no fpu register");
2151 assert(interval->assigned_regHi() == any_reg, "must not have hi register (double fpu values are stored in one register on Intel)");
2152 LIR_Opr result = LIR_OprFact::double_fpu(assigned_reg - pd_first_fpu_reg);
2153 #endif
2154 return result;
2155 }
2156 #endif // __SOFTFP__
2158 default: {
2159 ShouldNotReachHere();
2160 return LIR_OprFact::illegalOpr;
2161 }
2162 }
2163 }
2164 }
2166 LIR_Opr LinearScan::canonical_spill_opr(Interval* interval) {
2167 assert(interval->canonical_spill_slot() >= nof_regs, "canonical spill slot not set");
2168 return LIR_OprFact::stack(interval->canonical_spill_slot() - nof_regs, interval->type());
2169 }
2171 LIR_Opr LinearScan::color_lir_opr(LIR_Opr opr, int op_id, LIR_OpVisitState::OprMode mode) {
2172 assert(opr->is_virtual(), "should not call this otherwise");
2174 Interval* interval = interval_at(opr->vreg_number());
2175 assert(interval != NULL, "interval must exist");
2177 if (op_id != -1) {
2178 #ifdef ASSERT
2179 BlockBegin* block = block_of_op_with_id(op_id);
2180 if (block->number_of_sux() <= 1 && op_id == block->last_lir_instruction_id()) {
2181 // check if spill moves could have been appended at the end of this block, but
2182 // before the branch instruction. So the split child information for this branch would
2183 // be incorrect.
2184 LIR_OpBranch* branch = block->lir()->instructions_list()->last()->as_OpBranch();
2185 if (branch != NULL) {
2186 if (block->live_out().at(opr->vreg_number())) {
2187 assert(branch->cond() == lir_cond_always, "block does not end with an unconditional jump");
2188 assert(false, "can't get split child for the last branch of a block because the information would be incorrect (moves are inserted before the branch in resolve_data_flow)");
2189 }
2190 }
2191 }
2192 #endif
2194 // operands are not changed when an interval is split during allocation,
2195 // so search the right interval here
2196 interval = split_child_at_op_id(interval, op_id, mode);
2197 }
2199 LIR_Opr res = operand_for_interval(interval);
2201 #ifdef X86
2202 // new semantic for is_last_use: not only set on definite end of interval,
2203 // but also before hole
2204 // This may still miss some cases (e.g. for dead values), but it is not necessary that the
2205 // last use information is completely correct
2206 // information is only needed for fpu stack allocation
2207 if (res->is_fpu_register()) {
2208 if (opr->is_last_use() || op_id == interval->to() || (op_id != -1 && interval->has_hole_between(op_id, op_id + 1))) {
2209 assert(op_id == -1 || !is_block_begin(op_id), "holes at begin of block may also result from control flow");
2210 res = res->make_last_use();
2211 }
2212 }
2213 #endif
2215 assert(!gen()->is_vreg_flag_set(opr->vreg_number(), LIRGenerator::callee_saved) || !FrameMap::is_caller_save_register(res), "bad allocation");
2217 return res;
2218 }
2221 #ifdef ASSERT
2222 // some methods used to check correctness of debug information
2224 void assert_no_register_values(GrowableArray<ScopeValue*>* values) {
2225 if (values == NULL) {
2226 return;
2227 }
2229 for (int i = 0; i < values->length(); i++) {
2230 ScopeValue* value = values->at(i);
2232 if (value->is_location()) {
2233 Location location = ((LocationValue*)value)->location();
2234 assert(location.where() == Location::on_stack, "value is in register");
2235 }
2236 }
2237 }
2239 void assert_no_register_values(GrowableArray<MonitorValue*>* values) {
2240 if (values == NULL) {
2241 return;
2242 }
2244 for (int i = 0; i < values->length(); i++) {
2245 MonitorValue* value = values->at(i);
2247 if (value->owner()->is_location()) {
2248 Location location = ((LocationValue*)value->owner())->location();
2249 assert(location.where() == Location::on_stack, "owner is in register");
2250 }
2251 assert(value->basic_lock().where() == Location::on_stack, "basic_lock is in register");
2252 }
2253 }
2255 void assert_equal(Location l1, Location l2) {
2256 assert(l1.where() == l2.where() && l1.type() == l2.type() && l1.offset() == l2.offset(), "");
2257 }
2259 void assert_equal(ScopeValue* v1, ScopeValue* v2) {
2260 if (v1->is_location()) {
2261 assert(v2->is_location(), "");
2262 assert_equal(((LocationValue*)v1)->location(), ((LocationValue*)v2)->location());
2263 } else if (v1->is_constant_int()) {
2264 assert(v2->is_constant_int(), "");
2265 assert(((ConstantIntValue*)v1)->value() == ((ConstantIntValue*)v2)->value(), "");
2266 } else if (v1->is_constant_double()) {
2267 assert(v2->is_constant_double(), "");
2268 assert(((ConstantDoubleValue*)v1)->value() == ((ConstantDoubleValue*)v2)->value(), "");
2269 } else if (v1->is_constant_long()) {
2270 assert(v2->is_constant_long(), "");
2271 assert(((ConstantLongValue*)v1)->value() == ((ConstantLongValue*)v2)->value(), "");
2272 } else if (v1->is_constant_oop()) {
2273 assert(v2->is_constant_oop(), "");
2274 assert(((ConstantOopWriteValue*)v1)->value() == ((ConstantOopWriteValue*)v2)->value(), "");
2275 } else {
2276 ShouldNotReachHere();
2277 }
2278 }
2280 void assert_equal(MonitorValue* m1, MonitorValue* m2) {
2281 assert_equal(m1->owner(), m2->owner());
2282 assert_equal(m1->basic_lock(), m2->basic_lock());
2283 }
2285 void assert_equal(IRScopeDebugInfo* d1, IRScopeDebugInfo* d2) {
2286 assert(d1->scope() == d2->scope(), "not equal");
2287 assert(d1->bci() == d2->bci(), "not equal");
2289 if (d1->locals() != NULL) {
2290 assert(d1->locals() != NULL && d2->locals() != NULL, "not equal");
2291 assert(d1->locals()->length() == d2->locals()->length(), "not equal");
2292 for (int i = 0; i < d1->locals()->length(); i++) {
2293 assert_equal(d1->locals()->at(i), d2->locals()->at(i));
2294 }
2295 } else {
2296 assert(d1->locals() == NULL && d2->locals() == NULL, "not equal");
2297 }
2299 if (d1->expressions() != NULL) {
2300 assert(d1->expressions() != NULL && d2->expressions() != NULL, "not equal");
2301 assert(d1->expressions()->length() == d2->expressions()->length(), "not equal");
2302 for (int i = 0; i < d1->expressions()->length(); i++) {
2303 assert_equal(d1->expressions()->at(i), d2->expressions()->at(i));
2304 }
2305 } else {
2306 assert(d1->expressions() == NULL && d2->expressions() == NULL, "not equal");
2307 }
2309 if (d1->monitors() != NULL) {
2310 assert(d1->monitors() != NULL && d2->monitors() != NULL, "not equal");
2311 assert(d1->monitors()->length() == d2->monitors()->length(), "not equal");
2312 for (int i = 0; i < d1->monitors()->length(); i++) {
2313 assert_equal(d1->monitors()->at(i), d2->monitors()->at(i));
2314 }
2315 } else {
2316 assert(d1->monitors() == NULL && d2->monitors() == NULL, "not equal");
2317 }
2319 if (d1->caller() != NULL) {
2320 assert(d1->caller() != NULL && d2->caller() != NULL, "not equal");
2321 assert_equal(d1->caller(), d2->caller());
2322 } else {
2323 assert(d1->caller() == NULL && d2->caller() == NULL, "not equal");
2324 }
2325 }
2327 void check_stack_depth(CodeEmitInfo* info, int stack_end) {
2328 if (info->stack()->bci() != SynchronizationEntryBCI && !info->scope()->method()->is_native()) {
2329 Bytecodes::Code code = info->scope()->method()->java_code_at_bci(info->stack()->bci());
2330 switch (code) {
2331 case Bytecodes::_ifnull : // fall through
2332 case Bytecodes::_ifnonnull : // fall through
2333 case Bytecodes::_ifeq : // fall through
2334 case Bytecodes::_ifne : // fall through
2335 case Bytecodes::_iflt : // fall through
2336 case Bytecodes::_ifge : // fall through
2337 case Bytecodes::_ifgt : // fall through
2338 case Bytecodes::_ifle : // fall through
2339 case Bytecodes::_if_icmpeq : // fall through
2340 case Bytecodes::_if_icmpne : // fall through
2341 case Bytecodes::_if_icmplt : // fall through
2342 case Bytecodes::_if_icmpge : // fall through
2343 case Bytecodes::_if_icmpgt : // fall through
2344 case Bytecodes::_if_icmple : // fall through
2345 case Bytecodes::_if_acmpeq : // fall through
2346 case Bytecodes::_if_acmpne :
2347 assert(stack_end >= -Bytecodes::depth(code), "must have non-empty expression stack at if bytecode");
2348 break;
2349 }
2350 }
2351 }
2353 #endif // ASSERT
2356 IntervalWalker* LinearScan::init_compute_oop_maps() {
2357 // setup lists of potential oops for walking
2358 Interval* oop_intervals;
2359 Interval* non_oop_intervals;
2361 create_unhandled_lists(&oop_intervals, &non_oop_intervals, is_oop_interval, NULL);
2363 // intervals that have no oops inside need not to be processed
2364 // to ensure a walking until the last instruction id, add a dummy interval
2365 // with a high operation id
2366 non_oop_intervals = new Interval(any_reg);
2367 non_oop_intervals->add_range(max_jint - 2, max_jint - 1);
2369 return new IntervalWalker(this, oop_intervals, non_oop_intervals);
2370 }
2373 OopMap* LinearScan::compute_oop_map(IntervalWalker* iw, LIR_Op* op, CodeEmitInfo* info, bool is_call_site) {
2374 TRACE_LINEAR_SCAN(3, tty->print_cr("creating oop map at op_id %d", op->id()));
2376 // walk before the current operation -> intervals that start at
2377 // the operation (= output operands of the operation) are not
2378 // included in the oop map
2379 iw->walk_before(op->id());
2381 int frame_size = frame_map()->framesize();
2382 int arg_count = frame_map()->oop_map_arg_count();
2383 OopMap* map = new OopMap(frame_size, arg_count);
2385 // Iterate through active intervals
2386 for (Interval* interval = iw->active_first(fixedKind); interval != Interval::end(); interval = interval->next()) {
2387 int assigned_reg = interval->assigned_reg();
2389 assert(interval->current_from() <= op->id() && op->id() <= interval->current_to(), "interval should not be active otherwise");
2390 assert(interval->assigned_regHi() == any_reg, "oop must be single word");
2391 assert(interval->reg_num() >= LIR_OprDesc::vreg_base, "fixed interval found");
2393 // Check if this range covers the instruction. Intervals that
2394 // start or end at the current operation are not included in the
2395 // oop map, except in the case of patching moves. For patching
2396 // moves, any intervals which end at this instruction are included
2397 // in the oop map since we may safepoint while doing the patch
2398 // before we've consumed the inputs.
2399 if (op->is_patching() || op->id() < interval->current_to()) {
2401 // caller-save registers must not be included into oop-maps at calls
2402 assert(!is_call_site || assigned_reg >= nof_regs || !is_caller_save(assigned_reg), "interval is in a caller-save register at a call -> register will be overwritten");
2404 VMReg name = vm_reg_for_interval(interval);
2405 set_oop(map, name);
2407 // Spill optimization: when the stack value is guaranteed to be always correct,
2408 // then it must be added to the oop map even if the interval is currently in a register
2409 if (interval->always_in_memory() &&
2410 op->id() > interval->spill_definition_pos() &&
2411 interval->assigned_reg() != interval->canonical_spill_slot()) {
2412 assert(interval->spill_definition_pos() > 0, "position not set correctly");
2413 assert(interval->canonical_spill_slot() >= LinearScan::nof_regs, "no spill slot assigned");
2414 assert(interval->assigned_reg() < LinearScan::nof_regs, "interval is on stack, so stack slot is registered twice");
2416 set_oop(map, frame_map()->slot_regname(interval->canonical_spill_slot() - LinearScan::nof_regs));
2417 }
2418 }
2419 }
2421 // add oops from lock stack
2422 assert(info->stack() != NULL, "CodeEmitInfo must always have a stack");
2423 int locks_count = info->stack()->total_locks_size();
2424 for (int i = 0; i < locks_count; i++) {
2425 set_oop(map, frame_map()->monitor_object_regname(i));
2426 }
2428 return map;
2429 }
2432 void LinearScan::compute_oop_map(IntervalWalker* iw, const LIR_OpVisitState &visitor, LIR_Op* op) {
2433 assert(visitor.info_count() > 0, "no oop map needed");
2435 // compute oop_map only for first CodeEmitInfo
2436 // because it is (in most cases) equal for all other infos of the same operation
2437 CodeEmitInfo* first_info = visitor.info_at(0);
2438 OopMap* first_oop_map = compute_oop_map(iw, op, first_info, visitor.has_call());
2440 for (int i = 0; i < visitor.info_count(); i++) {
2441 CodeEmitInfo* info = visitor.info_at(i);
2442 OopMap* oop_map = first_oop_map;
2444 // compute worst case interpreter size in case of a deoptimization
2445 _compilation->update_interpreter_frame_size(info->interpreter_frame_size());
2447 if (info->stack()->locks_size() != first_info->stack()->locks_size()) {
2448 // this info has a different number of locks then the precomputed oop map
2449 // (possible for lock and unlock instructions) -> compute oop map with
2450 // correct lock information
2451 oop_map = compute_oop_map(iw, op, info, visitor.has_call());
2452 }
2454 if (info->_oop_map == NULL) {
2455 info->_oop_map = oop_map;
2456 } else {
2457 // a CodeEmitInfo can not be shared between different LIR-instructions
2458 // because interval splitting can occur anywhere between two instructions
2459 // and so the oop maps must be different
2460 // -> check if the already set oop_map is exactly the one calculated for this operation
2461 assert(info->_oop_map == oop_map, "same CodeEmitInfo used for multiple LIR instructions");
2462 }
2463 }
2464 }
2467 // frequently used constants
2468 // Allocate them with new so they are never destroyed (otherwise, a
2469 // forced exit could destroy these objects while they are still in
2470 // use).
2471 ConstantOopWriteValue* LinearScan::_oop_null_scope_value = new (ResourceObj::C_HEAP, mtCompiler) ConstantOopWriteValue(NULL);
2472 ConstantIntValue* LinearScan::_int_m1_scope_value = new (ResourceObj::C_HEAP, mtCompiler) ConstantIntValue(-1);
2473 ConstantIntValue* LinearScan::_int_0_scope_value = new (ResourceObj::C_HEAP, mtCompiler) ConstantIntValue(0);
2474 ConstantIntValue* LinearScan::_int_1_scope_value = new (ResourceObj::C_HEAP, mtCompiler) ConstantIntValue(1);
2475 ConstantIntValue* LinearScan::_int_2_scope_value = new (ResourceObj::C_HEAP, mtCompiler) ConstantIntValue(2);
2476 LocationValue* _illegal_value = new (ResourceObj::C_HEAP, mtCompiler) LocationValue(Location());
2478 void LinearScan::init_compute_debug_info() {
2479 // cache for frequently used scope values
2480 // (cpu registers and stack slots)
2481 _scope_value_cache = ScopeValueArray((LinearScan::nof_cpu_regs + frame_map()->argcount() + max_spills()) * 2, NULL);
2482 }
2484 MonitorValue* LinearScan::location_for_monitor_index(int monitor_index) {
2485 Location loc;
2486 if (!frame_map()->location_for_monitor_object(monitor_index, &loc)) {
2487 bailout("too large frame");
2488 }
2489 ScopeValue* object_scope_value = new LocationValue(loc);
2491 if (!frame_map()->location_for_monitor_lock(monitor_index, &loc)) {
2492 bailout("too large frame");
2493 }
2494 return new MonitorValue(object_scope_value, loc);
2495 }
2497 LocationValue* LinearScan::location_for_name(int name, Location::Type loc_type) {
2498 Location loc;
2499 if (!frame_map()->locations_for_slot(name, loc_type, &loc)) {
2500 bailout("too large frame");
2501 }
2502 return new LocationValue(loc);
2503 }
2506 int LinearScan::append_scope_value_for_constant(LIR_Opr opr, GrowableArray<ScopeValue*>* scope_values) {
2507 assert(opr->is_constant(), "should not be called otherwise");
2509 LIR_Const* c = opr->as_constant_ptr();
2510 BasicType t = c->type();
2511 switch (t) {
2512 case T_OBJECT: {
2513 jobject value = c->as_jobject();
2514 if (value == NULL) {
2515 scope_values->append(_oop_null_scope_value);
2516 } else {
2517 scope_values->append(new ConstantOopWriteValue(c->as_jobject()));
2518 }
2519 return 1;
2520 }
2522 case T_INT: // fall through
2523 case T_FLOAT: {
2524 int value = c->as_jint_bits();
2525 switch (value) {
2526 case -1: scope_values->append(_int_m1_scope_value); break;
2527 case 0: scope_values->append(_int_0_scope_value); break;
2528 case 1: scope_values->append(_int_1_scope_value); break;
2529 case 2: scope_values->append(_int_2_scope_value); break;
2530 default: scope_values->append(new ConstantIntValue(c->as_jint_bits())); break;
2531 }
2532 return 1;
2533 }
2535 case T_LONG: // fall through
2536 case T_DOUBLE: {
2537 #ifdef _LP64
2538 scope_values->append(_int_0_scope_value);
2539 scope_values->append(new ConstantLongValue(c->as_jlong_bits()));
2540 #else
2541 if (hi_word_offset_in_bytes > lo_word_offset_in_bytes) {
2542 scope_values->append(new ConstantIntValue(c->as_jint_hi_bits()));
2543 scope_values->append(new ConstantIntValue(c->as_jint_lo_bits()));
2544 } else {
2545 scope_values->append(new ConstantIntValue(c->as_jint_lo_bits()));
2546 scope_values->append(new ConstantIntValue(c->as_jint_hi_bits()));
2547 }
2548 #endif
2549 return 2;
2550 }
2552 case T_ADDRESS: {
2553 #ifdef _LP64
2554 scope_values->append(new ConstantLongValue(c->as_jint()));
2555 #else
2556 scope_values->append(new ConstantIntValue(c->as_jint()));
2557 #endif
2558 return 1;
2559 }
2561 default:
2562 ShouldNotReachHere();
2563 return -1;
2564 }
2565 }
2567 int LinearScan::append_scope_value_for_operand(LIR_Opr opr, GrowableArray<ScopeValue*>* scope_values) {
2568 if (opr->is_single_stack()) {
2569 int stack_idx = opr->single_stack_ix();
2570 bool is_oop = opr->is_oop_register();
2571 int cache_idx = (stack_idx + LinearScan::nof_cpu_regs) * 2 + (is_oop ? 1 : 0);
2573 ScopeValue* sv = _scope_value_cache.at(cache_idx);
2574 if (sv == NULL) {
2575 Location::Type loc_type = is_oop ? Location::oop : Location::normal;
2576 sv = location_for_name(stack_idx, loc_type);
2577 _scope_value_cache.at_put(cache_idx, sv);
2578 }
2580 // check if cached value is correct
2581 DEBUG_ONLY(assert_equal(sv, location_for_name(stack_idx, is_oop ? Location::oop : Location::normal)));
2583 scope_values->append(sv);
2584 return 1;
2586 } else if (opr->is_single_cpu()) {
2587 bool is_oop = opr->is_oop_register();
2588 int cache_idx = opr->cpu_regnr() * 2 + (is_oop ? 1 : 0);
2589 Location::Type int_loc_type = NOT_LP64(Location::normal) LP64_ONLY(Location::int_in_long);
2591 ScopeValue* sv = _scope_value_cache.at(cache_idx);
2592 if (sv == NULL) {
2593 Location::Type loc_type = is_oop ? Location::oop : int_loc_type;
2594 VMReg rname = frame_map()->regname(opr);
2595 sv = new LocationValue(Location::new_reg_loc(loc_type, rname));
2596 _scope_value_cache.at_put(cache_idx, sv);
2597 }
2599 // check if cached value is correct
2600 DEBUG_ONLY(assert_equal(sv, new LocationValue(Location::new_reg_loc(is_oop ? Location::oop : int_loc_type, frame_map()->regname(opr)))));
2602 scope_values->append(sv);
2603 return 1;
2605 #ifdef X86
2606 } else if (opr->is_single_xmm()) {
2607 VMReg rname = opr->as_xmm_float_reg()->as_VMReg();
2608 LocationValue* sv = new LocationValue(Location::new_reg_loc(Location::normal, rname));
2610 scope_values->append(sv);
2611 return 1;
2612 #endif
2614 } else if (opr->is_single_fpu()) {
2615 #ifdef X86
2616 // the exact location of fpu stack values is only known
2617 // during fpu stack allocation, so the stack allocator object
2618 // must be present
2619 assert(use_fpu_stack_allocation(), "should not have float stack values without fpu stack allocation (all floats must be SSE2)");
2620 assert(_fpu_stack_allocator != NULL, "must be present");
2621 opr = _fpu_stack_allocator->to_fpu_stack(opr);
2622 #endif
2624 Location::Type loc_type = float_saved_as_double ? Location::float_in_dbl : Location::normal;
2625 VMReg rname = frame_map()->fpu_regname(opr->fpu_regnr());
2626 #ifndef __SOFTFP__
2627 #ifndef VM_LITTLE_ENDIAN
2628 if (! float_saved_as_double) {
2629 // On big endian system, we may have an issue if float registers use only
2630 // the low half of the (same) double registers.
2631 // Both the float and the double could have the same regnr but would correspond
2632 // to two different addresses once saved.
2634 // get next safely (no assertion checks)
2635 VMReg next = VMRegImpl::as_VMReg(1+rname->value());
2636 if (next->is_reg() &&
2637 (next->as_FloatRegister() == rname->as_FloatRegister())) {
2638 // the back-end does use the same numbering for the double and the float
2639 rname = next; // VMReg for the low bits, e.g. the real VMReg for the float
2640 }
2641 }
2642 #endif
2643 #endif
2644 LocationValue* sv = new LocationValue(Location::new_reg_loc(loc_type, rname));
2646 scope_values->append(sv);
2647 return 1;
2649 } else {
2650 // double-size operands
2652 ScopeValue* first;
2653 ScopeValue* second;
2655 if (opr->is_double_stack()) {
2656 #ifdef _LP64
2657 Location loc1;
2658 Location::Type loc_type = opr->type() == T_LONG ? Location::lng : Location::dbl;
2659 if (!frame_map()->locations_for_slot(opr->double_stack_ix(), loc_type, &loc1, NULL)) {
2660 bailout("too large frame");
2661 }
2662 // Does this reverse on x86 vs. sparc?
2663 first = new LocationValue(loc1);
2664 second = _int_0_scope_value;
2665 #else
2666 Location loc1, loc2;
2667 if (!frame_map()->locations_for_slot(opr->double_stack_ix(), Location::normal, &loc1, &loc2)) {
2668 bailout("too large frame");
2669 }
2670 first = new LocationValue(loc1);
2671 second = new LocationValue(loc2);
2672 #endif // _LP64
2674 } else if (opr->is_double_cpu()) {
2675 #ifdef _LP64
2676 VMReg rname_first = opr->as_register_lo()->as_VMReg();
2677 first = new LocationValue(Location::new_reg_loc(Location::lng, rname_first));
2678 second = _int_0_scope_value;
2679 #else
2680 VMReg rname_first = opr->as_register_lo()->as_VMReg();
2681 VMReg rname_second = opr->as_register_hi()->as_VMReg();
2683 if (hi_word_offset_in_bytes < lo_word_offset_in_bytes) {
2684 // lo/hi and swapped relative to first and second, so swap them
2685 VMReg tmp = rname_first;
2686 rname_first = rname_second;
2687 rname_second = tmp;
2688 }
2690 first = new LocationValue(Location::new_reg_loc(Location::normal, rname_first));
2691 second = new LocationValue(Location::new_reg_loc(Location::normal, rname_second));
2692 #endif //_LP64
2695 #ifdef X86
2696 } else if (opr->is_double_xmm()) {
2697 assert(opr->fpu_regnrLo() == opr->fpu_regnrHi(), "assumed in calculation");
2698 VMReg rname_first = opr->as_xmm_double_reg()->as_VMReg();
2699 # ifdef _LP64
2700 first = new LocationValue(Location::new_reg_loc(Location::dbl, rname_first));
2701 second = _int_0_scope_value;
2702 # else
2703 first = new LocationValue(Location::new_reg_loc(Location::normal, rname_first));
2704 // %%% This is probably a waste but we'll keep things as they were for now
2705 if (true) {
2706 VMReg rname_second = rname_first->next();
2707 second = new LocationValue(Location::new_reg_loc(Location::normal, rname_second));
2708 }
2709 # endif
2710 #endif
2712 } else if (opr->is_double_fpu()) {
2713 // On SPARC, fpu_regnrLo/fpu_regnrHi represents the two halves of
2714 // the double as float registers in the native ordering. On X86,
2715 // fpu_regnrLo is a FPU stack slot whose VMReg represents
2716 // the low-order word of the double and fpu_regnrLo + 1 is the
2717 // name for the other half. *first and *second must represent the
2718 // least and most significant words, respectively.
2720 #ifdef X86
2721 // the exact location of fpu stack values is only known
2722 // during fpu stack allocation, so the stack allocator object
2723 // must be present
2724 assert(use_fpu_stack_allocation(), "should not have float stack values without fpu stack allocation (all floats must be SSE2)");
2725 assert(_fpu_stack_allocator != NULL, "must be present");
2726 opr = _fpu_stack_allocator->to_fpu_stack(opr);
2728 assert(opr->fpu_regnrLo() == opr->fpu_regnrHi(), "assumed in calculation (only fpu_regnrLo is used)");
2729 #endif
2730 #ifdef SPARC
2731 assert(opr->fpu_regnrLo() == opr->fpu_regnrHi() + 1, "assumed in calculation (only fpu_regnrHi is used)");
2732 #endif
2733 #ifdef ARM
2734 assert(opr->fpu_regnrHi() == opr->fpu_regnrLo() + 1, "assumed in calculation (only fpu_regnrLo is used)");
2735 #endif
2736 #ifdef PPC
2737 assert(opr->fpu_regnrLo() == opr->fpu_regnrHi(), "assumed in calculation (only fpu_regnrHi is used)");
2738 #endif
2740 #ifdef VM_LITTLE_ENDIAN
2741 VMReg rname_first = frame_map()->fpu_regname(opr->fpu_regnrLo());
2742 #else
2743 VMReg rname_first = frame_map()->fpu_regname(opr->fpu_regnrHi());
2744 #endif
2746 #ifdef _LP64
2747 first = new LocationValue(Location::new_reg_loc(Location::dbl, rname_first));
2748 second = _int_0_scope_value;
2749 #else
2750 first = new LocationValue(Location::new_reg_loc(Location::normal, rname_first));
2751 // %%% This is probably a waste but we'll keep things as they were for now
2752 if (true) {
2753 VMReg rname_second = rname_first->next();
2754 second = new LocationValue(Location::new_reg_loc(Location::normal, rname_second));
2755 }
2756 #endif
2758 } else {
2759 ShouldNotReachHere();
2760 first = NULL;
2761 second = NULL;
2762 }
2764 assert(first != NULL && second != NULL, "must be set");
2765 // The convention the interpreter uses is that the second local
2766 // holds the first raw word of the native double representation.
2767 // This is actually reasonable, since locals and stack arrays
2768 // grow downwards in all implementations.
2769 // (If, on some machine, the interpreter's Java locals or stack
2770 // were to grow upwards, the embedded doubles would be word-swapped.)
2771 scope_values->append(second);
2772 scope_values->append(first);
2773 return 2;
2774 }
2775 }
2778 int LinearScan::append_scope_value(int op_id, Value value, GrowableArray<ScopeValue*>* scope_values) {
2779 if (value != NULL) {
2780 LIR_Opr opr = value->operand();
2781 Constant* con = value->as_Constant();
2783 assert(con == NULL || opr->is_virtual() || opr->is_constant() || opr->is_illegal(), "asumption: Constant instructions have only constant operands (or illegal if constant is optimized away)");
2784 assert(con != NULL || opr->is_virtual(), "asumption: non-Constant instructions have only virtual operands");
2786 if (con != NULL && !con->is_pinned() && !opr->is_constant()) {
2787 // Unpinned constants may have a virtual operand for a part of the lifetime
2788 // or may be illegal when it was optimized away,
2789 // so always use a constant operand
2790 opr = LIR_OprFact::value_type(con->type());
2791 }
2792 assert(opr->is_virtual() || opr->is_constant(), "other cases not allowed here");
2794 if (opr->is_virtual()) {
2795 LIR_OpVisitState::OprMode mode = LIR_OpVisitState::inputMode;
2797 BlockBegin* block = block_of_op_with_id(op_id);
2798 if (block->number_of_sux() == 1 && op_id == block->last_lir_instruction_id()) {
2799 // generating debug information for the last instruction of a block.
2800 // if this instruction is a branch, spill moves are inserted before this branch
2801 // and so the wrong operand would be returned (spill moves at block boundaries are not
2802 // considered in the live ranges of intervals)
2803 // Solution: use the first op_id of the branch target block instead.
2804 if (block->lir()->instructions_list()->last()->as_OpBranch() != NULL) {
2805 if (block->live_out().at(opr->vreg_number())) {
2806 op_id = block->sux_at(0)->first_lir_instruction_id();
2807 mode = LIR_OpVisitState::outputMode;
2808 }
2809 }
2810 }
2812 // Get current location of operand
2813 // The operand must be live because debug information is considered when building the intervals
2814 // if the interval is not live, color_lir_opr will cause an assertion failure
2815 opr = color_lir_opr(opr, op_id, mode);
2816 assert(!has_call(op_id) || opr->is_stack() || !is_caller_save(reg_num(opr)), "can not have caller-save register operands at calls");
2818 // Append to ScopeValue array
2819 return append_scope_value_for_operand(opr, scope_values);
2821 } else {
2822 assert(value->as_Constant() != NULL, "all other instructions have only virtual operands");
2823 assert(opr->is_constant(), "operand must be constant");
2825 return append_scope_value_for_constant(opr, scope_values);
2826 }
2827 } else {
2828 // append a dummy value because real value not needed
2829 scope_values->append(_illegal_value);
2830 return 1;
2831 }
2832 }
2835 IRScopeDebugInfo* LinearScan::compute_debug_info_for_scope(int op_id, IRScope* cur_scope, ValueStack* cur_state, ValueStack* innermost_state) {
2836 IRScopeDebugInfo* caller_debug_info = NULL;
2838 ValueStack* caller_state = cur_state->caller_state();
2839 if (caller_state != NULL) {
2840 // process recursively to compute outermost scope first
2841 caller_debug_info = compute_debug_info_for_scope(op_id, cur_scope->caller(), caller_state, innermost_state);
2842 }
2844 // initialize these to null.
2845 // If we don't need deopt info or there are no locals, expressions or monitors,
2846 // then these get recorded as no information and avoids the allocation of 0 length arrays.
2847 GrowableArray<ScopeValue*>* locals = NULL;
2848 GrowableArray<ScopeValue*>* expressions = NULL;
2849 GrowableArray<MonitorValue*>* monitors = NULL;
2851 // describe local variable values
2852 int nof_locals = cur_state->locals_size();
2853 if (nof_locals > 0) {
2854 locals = new GrowableArray<ScopeValue*>(nof_locals);
2856 int pos = 0;
2857 while (pos < nof_locals) {
2858 assert(pos < cur_state->locals_size(), "why not?");
2860 Value local = cur_state->local_at(pos);
2861 pos += append_scope_value(op_id, local, locals);
2863 assert(locals->length() == pos, "must match");
2864 }
2865 assert(locals->length() == cur_scope->method()->max_locals(), "wrong number of locals");
2866 assert(locals->length() == cur_state->locals_size(), "wrong number of locals");
2867 } else if (cur_scope->method()->max_locals() > 0) {
2868 assert(cur_state->kind() == ValueStack::EmptyExceptionState, "should be");
2869 nof_locals = cur_scope->method()->max_locals();
2870 locals = new GrowableArray<ScopeValue*>(nof_locals);
2871 for(int i = 0; i < nof_locals; i++) {
2872 locals->append(_illegal_value);
2873 }
2874 }
2876 // describe expression stack
2877 int nof_stack = cur_state->stack_size();
2878 if (nof_stack > 0) {
2879 expressions = new GrowableArray<ScopeValue*>(nof_stack);
2881 int pos = 0;
2882 while (pos < nof_stack) {
2883 Value expression = cur_state->stack_at_inc(pos);
2884 append_scope_value(op_id, expression, expressions);
2886 assert(expressions->length() == pos, "must match");
2887 }
2888 assert(expressions->length() == cur_state->stack_size(), "wrong number of stack entries");
2889 }
2891 // describe monitors
2892 int nof_locks = cur_state->locks_size();
2893 if (nof_locks > 0) {
2894 int lock_offset = cur_state->caller_state() != NULL ? cur_state->caller_state()->total_locks_size() : 0;
2895 monitors = new GrowableArray<MonitorValue*>(nof_locks);
2896 for (int i = 0; i < nof_locks; i++) {
2897 monitors->append(location_for_monitor_index(lock_offset + i));
2898 }
2899 }
2901 return new IRScopeDebugInfo(cur_scope, cur_state->bci(), locals, expressions, monitors, caller_debug_info);
2902 }
2905 void LinearScan::compute_debug_info(CodeEmitInfo* info, int op_id) {
2906 TRACE_LINEAR_SCAN(3, tty->print_cr("creating debug information at op_id %d", op_id));
2908 IRScope* innermost_scope = info->scope();
2909 ValueStack* innermost_state = info->stack();
2911 assert(innermost_scope != NULL && innermost_state != NULL, "why is it missing?");
2913 DEBUG_ONLY(check_stack_depth(info, innermost_state->stack_size()));
2915 if (info->_scope_debug_info == NULL) {
2916 // compute debug information
2917 info->_scope_debug_info = compute_debug_info_for_scope(op_id, innermost_scope, innermost_state, innermost_state);
2918 } else {
2919 // debug information already set. Check that it is correct from the current point of view
2920 DEBUG_ONLY(assert_equal(info->_scope_debug_info, compute_debug_info_for_scope(op_id, innermost_scope, innermost_state, innermost_state)));
2921 }
2922 }
2925 void LinearScan::assign_reg_num(LIR_OpList* instructions, IntervalWalker* iw) {
2926 LIR_OpVisitState visitor;
2927 int num_inst = instructions->length();
2928 bool has_dead = false;
2930 for (int j = 0; j < num_inst; j++) {
2931 LIR_Op* op = instructions->at(j);
2932 if (op == NULL) { // this can happen when spill-moves are removed in eliminate_spill_moves
2933 has_dead = true;
2934 continue;
2935 }
2936 int op_id = op->id();
2938 // visit instruction to get list of operands
2939 visitor.visit(op);
2941 // iterate all modes of the visitor and process all virtual operands
2942 for_each_visitor_mode(mode) {
2943 int n = visitor.opr_count(mode);
2944 for (int k = 0; k < n; k++) {
2945 LIR_Opr opr = visitor.opr_at(mode, k);
2946 if (opr->is_virtual_register()) {
2947 visitor.set_opr_at(mode, k, color_lir_opr(opr, op_id, mode));
2948 }
2949 }
2950 }
2952 if (visitor.info_count() > 0) {
2953 // exception handling
2954 if (compilation()->has_exception_handlers()) {
2955 XHandlers* xhandlers = visitor.all_xhandler();
2956 int n = xhandlers->length();
2957 for (int k = 0; k < n; k++) {
2958 XHandler* handler = xhandlers->handler_at(k);
2959 if (handler->entry_code() != NULL) {
2960 assign_reg_num(handler->entry_code()->instructions_list(), NULL);
2961 }
2962 }
2963 } else {
2964 assert(visitor.all_xhandler()->length() == 0, "missed exception handler");
2965 }
2967 // compute oop map
2968 assert(iw != NULL, "needed for compute_oop_map");
2969 compute_oop_map(iw, visitor, op);
2971 // compute debug information
2972 if (!use_fpu_stack_allocation()) {
2973 // compute debug information if fpu stack allocation is not needed.
2974 // when fpu stack allocation is needed, the debug information can not
2975 // be computed here because the exact location of fpu operands is not known
2976 // -> debug information is created inside the fpu stack allocator
2977 int n = visitor.info_count();
2978 for (int k = 0; k < n; k++) {
2979 compute_debug_info(visitor.info_at(k), op_id);
2980 }
2981 }
2982 }
2984 #ifdef ASSERT
2985 // make sure we haven't made the op invalid.
2986 op->verify();
2987 #endif
2989 // remove useless moves
2990 if (op->code() == lir_move) {
2991 assert(op->as_Op1() != NULL, "move must be LIR_Op1");
2992 LIR_Op1* move = (LIR_Op1*)op;
2993 LIR_Opr src = move->in_opr();
2994 LIR_Opr dst = move->result_opr();
2995 if (dst == src ||
2996 !dst->is_pointer() && !src->is_pointer() &&
2997 src->is_same_register(dst)) {
2998 instructions->at_put(j, NULL);
2999 has_dead = true;
3000 }
3001 }
3002 }
3004 if (has_dead) {
3005 // iterate all instructions of the block and remove all null-values.
3006 int insert_point = 0;
3007 for (int j = 0; j < num_inst; j++) {
3008 LIR_Op* op = instructions->at(j);
3009 if (op != NULL) {
3010 if (insert_point != j) {
3011 instructions->at_put(insert_point, op);
3012 }
3013 insert_point++;
3014 }
3015 }
3016 instructions->truncate(insert_point);
3017 }
3018 }
3020 void LinearScan::assign_reg_num() {
3021 TIME_LINEAR_SCAN(timer_assign_reg_num);
3023 init_compute_debug_info();
3024 IntervalWalker* iw = init_compute_oop_maps();
3026 int num_blocks = block_count();
3027 for (int i = 0; i < num_blocks; i++) {
3028 BlockBegin* block = block_at(i);
3029 assign_reg_num(block->lir()->instructions_list(), iw);
3030 }
3031 }
3034 void LinearScan::do_linear_scan() {
3035 NOT_PRODUCT(_total_timer.begin_method());
3037 number_instructions();
3039 NOT_PRODUCT(print_lir(1, "Before Register Allocation"));
3041 compute_local_live_sets();
3042 compute_global_live_sets();
3043 CHECK_BAILOUT();
3045 build_intervals();
3046 CHECK_BAILOUT();
3047 sort_intervals_before_allocation();
3049 NOT_PRODUCT(print_intervals("Before Register Allocation"));
3050 NOT_PRODUCT(LinearScanStatistic::compute(this, _stat_before_alloc));
3052 allocate_registers();
3053 CHECK_BAILOUT();
3055 resolve_data_flow();
3056 if (compilation()->has_exception_handlers()) {
3057 resolve_exception_handlers();
3058 }
3059 // fill in number of spill slots into frame_map
3060 propagate_spill_slots();
3061 CHECK_BAILOUT();
3063 NOT_PRODUCT(print_intervals("After Register Allocation"));
3064 NOT_PRODUCT(print_lir(2, "LIR after register allocation:"));
3066 sort_intervals_after_allocation();
3068 DEBUG_ONLY(verify());
3070 eliminate_spill_moves();
3071 assign_reg_num();
3072 CHECK_BAILOUT();
3074 NOT_PRODUCT(print_lir(2, "LIR after assignment of register numbers:"));
3075 NOT_PRODUCT(LinearScanStatistic::compute(this, _stat_after_asign));
3077 { TIME_LINEAR_SCAN(timer_allocate_fpu_stack);
3079 if (use_fpu_stack_allocation()) {
3080 allocate_fpu_stack(); // Only has effect on Intel
3081 NOT_PRODUCT(print_lir(2, "LIR after FPU stack allocation:"));
3082 }
3083 }
3085 { TIME_LINEAR_SCAN(timer_optimize_lir);
3087 EdgeMoveOptimizer::optimize(ir()->code());
3088 ControlFlowOptimizer::optimize(ir()->code());
3089 // check that cfg is still correct after optimizations
3090 ir()->verify();
3091 }
3093 NOT_PRODUCT(print_lir(1, "Before Code Generation", false));
3094 NOT_PRODUCT(LinearScanStatistic::compute(this, _stat_final));
3095 NOT_PRODUCT(_total_timer.end_method(this));
3096 }
3099 // ********** Printing functions
3101 #ifndef PRODUCT
3103 void LinearScan::print_timers(double total) {
3104 _total_timer.print(total);
3105 }
3107 void LinearScan::print_statistics() {
3108 _stat_before_alloc.print("before allocation");
3109 _stat_after_asign.print("after assignment of register");
3110 _stat_final.print("after optimization");
3111 }
3113 void LinearScan::print_bitmap(BitMap& b) {
3114 for (unsigned int i = 0; i < b.size(); i++) {
3115 if (b.at(i)) tty->print("%d ", i);
3116 }
3117 tty->cr();
3118 }
3120 void LinearScan::print_intervals(const char* label) {
3121 if (TraceLinearScanLevel >= 1) {
3122 int i;
3123 tty->cr();
3124 tty->print_cr("%s", label);
3126 for (i = 0; i < interval_count(); i++) {
3127 Interval* interval = interval_at(i);
3128 if (interval != NULL) {
3129 interval->print();
3130 }
3131 }
3133 tty->cr();
3134 tty->print_cr("--- Basic Blocks ---");
3135 for (i = 0; i < block_count(); i++) {
3136 BlockBegin* block = block_at(i);
3137 tty->print("B%d [%d, %d, %d, %d] ", block->block_id(), block->first_lir_instruction_id(), block->last_lir_instruction_id(), block->loop_index(), block->loop_depth());
3138 }
3139 tty->cr();
3140 tty->cr();
3141 }
3143 if (PrintCFGToFile) {
3144 CFGPrinter::print_intervals(&_intervals, label);
3145 }
3146 }
3148 void LinearScan::print_lir(int level, const char* label, bool hir_valid) {
3149 if (TraceLinearScanLevel >= level) {
3150 tty->cr();
3151 tty->print_cr("%s", label);
3152 print_LIR(ir()->linear_scan_order());
3153 tty->cr();
3154 }
3156 if (level == 1 && PrintCFGToFile) {
3157 CFGPrinter::print_cfg(ir()->linear_scan_order(), label, hir_valid, true);
3158 }
3159 }
3161 #endif //PRODUCT
3164 // ********** verification functions for allocation
3165 // (check that all intervals have a correct register and that no registers are overwritten)
3166 #ifdef ASSERT
3168 void LinearScan::verify() {
3169 TRACE_LINEAR_SCAN(2, tty->print_cr("********* verifying intervals ******************************************"));
3170 verify_intervals();
3172 TRACE_LINEAR_SCAN(2, tty->print_cr("********* verifying that no oops are in fixed intervals ****************"));
3173 verify_no_oops_in_fixed_intervals();
3175 TRACE_LINEAR_SCAN(2, tty->print_cr("********* verifying that unpinned constants are not alive across block boundaries"));
3176 verify_constants();
3178 TRACE_LINEAR_SCAN(2, tty->print_cr("********* verifying register allocation ********************************"));
3179 verify_registers();
3181 TRACE_LINEAR_SCAN(2, tty->print_cr("********* no errors found **********************************************"));
3182 }
3184 void LinearScan::verify_intervals() {
3185 int len = interval_count();
3186 bool has_error = false;
3188 for (int i = 0; i < len; i++) {
3189 Interval* i1 = interval_at(i);
3190 if (i1 == NULL) continue;
3192 i1->check_split_children();
3194 if (i1->reg_num() != i) {
3195 tty->print_cr("Interval %d is on position %d in list", i1->reg_num(), i); i1->print(); tty->cr();
3196 has_error = true;
3197 }
3199 if (i1->reg_num() >= LIR_OprDesc::vreg_base && i1->type() == T_ILLEGAL) {
3200 tty->print_cr("Interval %d has no type assigned", i1->reg_num()); i1->print(); tty->cr();
3201 has_error = true;
3202 }
3204 if (i1->assigned_reg() == any_reg) {
3205 tty->print_cr("Interval %d has no register assigned", i1->reg_num()); i1->print(); tty->cr();
3206 has_error = true;
3207 }
3209 if (i1->assigned_reg() == i1->assigned_regHi()) {
3210 tty->print_cr("Interval %d: low and high register equal", i1->reg_num()); i1->print(); tty->cr();
3211 has_error = true;
3212 }
3214 if (!is_processed_reg_num(i1->assigned_reg())) {
3215 tty->print_cr("Can not have an Interval for an ignored register"); i1->print(); tty->cr();
3216 has_error = true;
3217 }
3219 if (i1->first() == Range::end()) {
3220 tty->print_cr("Interval %d has no Range", i1->reg_num()); i1->print(); tty->cr();
3221 has_error = true;
3222 }
3224 for (Range* r = i1->first(); r != Range::end(); r = r->next()) {
3225 if (r->from() >= r->to()) {
3226 tty->print_cr("Interval %d has zero length range", i1->reg_num()); i1->print(); tty->cr();
3227 has_error = true;
3228 }
3229 }
3231 for (int j = i + 1; j < len; j++) {
3232 Interval* i2 = interval_at(j);
3233 if (i2 == NULL) continue;
3235 // special intervals that are created in MoveResolver
3236 // -> ignore them because the range information has no meaning there
3237 if (i1->from() == 1 && i1->to() == 2) continue;
3238 if (i2->from() == 1 && i2->to() == 2) continue;
3240 int r1 = i1->assigned_reg();
3241 int r1Hi = i1->assigned_regHi();
3242 int r2 = i2->assigned_reg();
3243 int r2Hi = i2->assigned_regHi();
3244 if (i1->intersects(i2) && (r1 == r2 || r1 == r2Hi || (r1Hi != any_reg && (r1Hi == r2 || r1Hi == r2Hi)))) {
3245 tty->print_cr("Intervals %d and %d overlap and have the same register assigned", i1->reg_num(), i2->reg_num());
3246 i1->print(); tty->cr();
3247 i2->print(); tty->cr();
3248 has_error = true;
3249 }
3250 }
3251 }
3253 assert(has_error == false, "register allocation invalid");
3254 }
3257 void LinearScan::verify_no_oops_in_fixed_intervals() {
3258 Interval* fixed_intervals;
3259 Interval* other_intervals;
3260 create_unhandled_lists(&fixed_intervals, &other_intervals, is_precolored_cpu_interval, NULL);
3262 // to ensure a walking until the last instruction id, add a dummy interval
3263 // with a high operation id
3264 other_intervals = new Interval(any_reg);
3265 other_intervals->add_range(max_jint - 2, max_jint - 1);
3266 IntervalWalker* iw = new IntervalWalker(this, fixed_intervals, other_intervals);
3268 LIR_OpVisitState visitor;
3269 for (int i = 0; i < block_count(); i++) {
3270 BlockBegin* block = block_at(i);
3272 LIR_OpList* instructions = block->lir()->instructions_list();
3274 for (int j = 0; j < instructions->length(); j++) {
3275 LIR_Op* op = instructions->at(j);
3276 int op_id = op->id();
3278 visitor.visit(op);
3280 if (visitor.info_count() > 0) {
3281 iw->walk_before(op->id());
3282 bool check_live = true;
3283 if (op->code() == lir_move) {
3284 LIR_Op1* move = (LIR_Op1*)op;
3285 check_live = (move->patch_code() == lir_patch_none);
3286 }
3287 LIR_OpBranch* branch = op->as_OpBranch();
3288 if (branch != NULL && branch->stub() != NULL && branch->stub()->is_exception_throw_stub()) {
3289 // Don't bother checking the stub in this case since the
3290 // exception stub will never return to normal control flow.
3291 check_live = false;
3292 }
3294 // Make sure none of the fixed registers is live across an
3295 // oopmap since we can't handle that correctly.
3296 if (check_live) {
3297 for (Interval* interval = iw->active_first(fixedKind);
3298 interval != Interval::end();
3299 interval = interval->next()) {
3300 if (interval->current_to() > op->id() + 1) {
3301 // This interval is live out of this op so make sure
3302 // that this interval represents some value that's
3303 // referenced by this op either as an input or output.
3304 bool ok = false;
3305 for_each_visitor_mode(mode) {
3306 int n = visitor.opr_count(mode);
3307 for (int k = 0; k < n; k++) {
3308 LIR_Opr opr = visitor.opr_at(mode, k);
3309 if (opr->is_fixed_cpu()) {
3310 if (interval_at(reg_num(opr)) == interval) {
3311 ok = true;
3312 break;
3313 }
3314 int hi = reg_numHi(opr);
3315 if (hi != -1 && interval_at(hi) == interval) {
3316 ok = true;
3317 break;
3318 }
3319 }
3320 }
3321 }
3322 assert(ok, "fixed intervals should never be live across an oopmap point");
3323 }
3324 }
3325 }
3326 }
3328 // oop-maps at calls do not contain registers, so check is not needed
3329 if (!visitor.has_call()) {
3331 for_each_visitor_mode(mode) {
3332 int n = visitor.opr_count(mode);
3333 for (int k = 0; k < n; k++) {
3334 LIR_Opr opr = visitor.opr_at(mode, k);
3336 if (opr->is_fixed_cpu() && opr->is_oop()) {
3337 // operand is a non-virtual cpu register and contains an oop
3338 TRACE_LINEAR_SCAN(4, op->print_on(tty); tty->print("checking operand "); opr->print(); tty->cr());
3340 Interval* interval = interval_at(reg_num(opr));
3341 assert(interval != NULL, "no interval");
3343 if (mode == LIR_OpVisitState::inputMode) {
3344 if (interval->to() >= op_id + 1) {
3345 assert(interval->to() < op_id + 2 ||
3346 interval->has_hole_between(op_id, op_id + 2),
3347 "oop input operand live after instruction");
3348 }
3349 } else if (mode == LIR_OpVisitState::outputMode) {
3350 if (interval->from() <= op_id - 1) {
3351 assert(interval->has_hole_between(op_id - 1, op_id),
3352 "oop input operand live after instruction");
3353 }
3354 }
3355 }
3356 }
3357 }
3358 }
3359 }
3360 }
3361 }
3364 void LinearScan::verify_constants() {
3365 int num_regs = num_virtual_regs();
3366 int size = live_set_size();
3367 int num_blocks = block_count();
3369 for (int i = 0; i < num_blocks; i++) {
3370 BlockBegin* block = block_at(i);
3371 BitMap live_at_edge = block->live_in();
3373 // visit all registers where the live_at_edge bit is set
3374 for (int r = (int)live_at_edge.get_next_one_offset(0, size); r < size; r = (int)live_at_edge.get_next_one_offset(r + 1, size)) {
3375 TRACE_LINEAR_SCAN(4, tty->print("checking interval %d of block B%d", r, block->block_id()));
3377 Value value = gen()->instruction_for_vreg(r);
3379 assert(value != NULL, "all intervals live across block boundaries must have Value");
3380 assert(value->operand()->is_register() && value->operand()->is_virtual(), "value must have virtual operand");
3381 assert(value->operand()->vreg_number() == r, "register number must match");
3382 // TKR assert(value->as_Constant() == NULL || value->is_pinned(), "only pinned constants can be alive accross block boundaries");
3383 }
3384 }
3385 }
3388 class RegisterVerifier: public StackObj {
3389 private:
3390 LinearScan* _allocator;
3391 BlockList _work_list; // all blocks that must be processed
3392 IntervalsList _saved_states; // saved information of previous check
3394 // simplified access to methods of LinearScan
3395 Compilation* compilation() const { return _allocator->compilation(); }
3396 Interval* interval_at(int reg_num) const { return _allocator->interval_at(reg_num); }
3397 int reg_num(LIR_Opr opr) const { return _allocator->reg_num(opr); }
3399 // currently, only registers are processed
3400 int state_size() { return LinearScan::nof_regs; }
3402 // accessors
3403 IntervalList* state_for_block(BlockBegin* block) { return _saved_states.at(block->block_id()); }
3404 void set_state_for_block(BlockBegin* block, IntervalList* saved_state) { _saved_states.at_put(block->block_id(), saved_state); }
3405 void add_to_work_list(BlockBegin* block) { if (!_work_list.contains(block)) _work_list.append(block); }
3407 // helper functions
3408 IntervalList* copy(IntervalList* input_state);
3409 void state_put(IntervalList* input_state, int reg, Interval* interval);
3410 bool check_state(IntervalList* input_state, int reg, Interval* interval);
3412 void process_block(BlockBegin* block);
3413 void process_xhandler(XHandler* xhandler, IntervalList* input_state);
3414 void process_successor(BlockBegin* block, IntervalList* input_state);
3415 void process_operations(LIR_List* ops, IntervalList* input_state);
3417 public:
3418 RegisterVerifier(LinearScan* allocator)
3419 : _allocator(allocator)
3420 , _work_list(16)
3421 , _saved_states(BlockBegin::number_of_blocks(), NULL)
3422 { }
3424 void verify(BlockBegin* start);
3425 };
3428 // entry function from LinearScan that starts the verification
3429 void LinearScan::verify_registers() {
3430 RegisterVerifier verifier(this);
3431 verifier.verify(block_at(0));
3432 }
3435 void RegisterVerifier::verify(BlockBegin* start) {
3436 // setup input registers (method arguments) for first block
3437 IntervalList* input_state = new IntervalList(state_size(), NULL);
3438 CallingConvention* args = compilation()->frame_map()->incoming_arguments();
3439 for (int n = 0; n < args->length(); n++) {
3440 LIR_Opr opr = args->at(n);
3441 if (opr->is_register()) {
3442 Interval* interval = interval_at(reg_num(opr));
3444 if (interval->assigned_reg() < state_size()) {
3445 input_state->at_put(interval->assigned_reg(), interval);
3446 }
3447 if (interval->assigned_regHi() != LinearScan::any_reg && interval->assigned_regHi() < state_size()) {
3448 input_state->at_put(interval->assigned_regHi(), interval);
3449 }
3450 }
3451 }
3453 set_state_for_block(start, input_state);
3454 add_to_work_list(start);
3456 // main loop for verification
3457 do {
3458 BlockBegin* block = _work_list.at(0);
3459 _work_list.remove_at(0);
3461 process_block(block);
3462 } while (!_work_list.is_empty());
3463 }
3465 void RegisterVerifier::process_block(BlockBegin* block) {
3466 TRACE_LINEAR_SCAN(2, tty->cr(); tty->print_cr("process_block B%d", block->block_id()));
3468 // must copy state because it is modified
3469 IntervalList* input_state = copy(state_for_block(block));
3471 if (TraceLinearScanLevel >= 4) {
3472 tty->print_cr("Input-State of intervals:");
3473 tty->print(" ");
3474 for (int i = 0; i < state_size(); i++) {
3475 if (input_state->at(i) != NULL) {
3476 tty->print(" %4d", input_state->at(i)->reg_num());
3477 } else {
3478 tty->print(" __");
3479 }
3480 }
3481 tty->cr();
3482 tty->cr();
3483 }
3485 // process all operations of the block
3486 process_operations(block->lir(), input_state);
3488 // iterate all successors
3489 for (int i = 0; i < block->number_of_sux(); i++) {
3490 process_successor(block->sux_at(i), input_state);
3491 }
3492 }
3494 void RegisterVerifier::process_xhandler(XHandler* xhandler, IntervalList* input_state) {
3495 TRACE_LINEAR_SCAN(2, tty->print_cr("process_xhandler B%d", xhandler->entry_block()->block_id()));
3497 // must copy state because it is modified
3498 input_state = copy(input_state);
3500 if (xhandler->entry_code() != NULL) {
3501 process_operations(xhandler->entry_code(), input_state);
3502 }
3503 process_successor(xhandler->entry_block(), input_state);
3504 }
3506 void RegisterVerifier::process_successor(BlockBegin* block, IntervalList* input_state) {
3507 IntervalList* saved_state = state_for_block(block);
3509 if (saved_state != NULL) {
3510 // this block was already processed before.
3511 // check if new input_state is consistent with saved_state
3513 bool saved_state_correct = true;
3514 for (int i = 0; i < state_size(); i++) {
3515 if (input_state->at(i) != saved_state->at(i)) {
3516 // current input_state and previous saved_state assume a different
3517 // interval in this register -> assume that this register is invalid
3518 if (saved_state->at(i) != NULL) {
3519 // invalidate old calculation only if it assumed that
3520 // register was valid. when the register was already invalid,
3521 // then the old calculation was correct.
3522 saved_state_correct = false;
3523 saved_state->at_put(i, NULL);
3525 TRACE_LINEAR_SCAN(4, tty->print_cr("process_successor B%d: invalidating slot %d", block->block_id(), i));
3526 }
3527 }
3528 }
3530 if (saved_state_correct) {
3531 // already processed block with correct input_state
3532 TRACE_LINEAR_SCAN(2, tty->print_cr("process_successor B%d: previous visit already correct", block->block_id()));
3533 } else {
3534 // must re-visit this block
3535 TRACE_LINEAR_SCAN(2, tty->print_cr("process_successor B%d: must re-visit because input state changed", block->block_id()));
3536 add_to_work_list(block);
3537 }
3539 } else {
3540 // block was not processed before, so set initial input_state
3541 TRACE_LINEAR_SCAN(2, tty->print_cr("process_successor B%d: initial visit", block->block_id()));
3543 set_state_for_block(block, copy(input_state));
3544 add_to_work_list(block);
3545 }
3546 }
3549 IntervalList* RegisterVerifier::copy(IntervalList* input_state) {
3550 IntervalList* copy_state = new IntervalList(input_state->length());
3551 copy_state->push_all(input_state);
3552 return copy_state;
3553 }
3555 void RegisterVerifier::state_put(IntervalList* input_state, int reg, Interval* interval) {
3556 if (reg != LinearScan::any_reg && reg < state_size()) {
3557 if (interval != NULL) {
3558 TRACE_LINEAR_SCAN(4, tty->print_cr(" reg[%d] = %d", reg, interval->reg_num()));
3559 } else if (input_state->at(reg) != NULL) {
3560 TRACE_LINEAR_SCAN(4, tty->print_cr(" reg[%d] = NULL", reg));
3561 }
3563 input_state->at_put(reg, interval);
3564 }
3565 }
3567 bool RegisterVerifier::check_state(IntervalList* input_state, int reg, Interval* interval) {
3568 if (reg != LinearScan::any_reg && reg < state_size()) {
3569 if (input_state->at(reg) != interval) {
3570 tty->print_cr("!! Error in register allocation: register %d does not contain interval %d", reg, interval->reg_num());
3571 return true;
3572 }
3573 }
3574 return false;
3575 }
3577 void RegisterVerifier::process_operations(LIR_List* ops, IntervalList* input_state) {
3578 // visit all instructions of the block
3579 LIR_OpVisitState visitor;
3580 bool has_error = false;
3582 for (int i = 0; i < ops->length(); i++) {
3583 LIR_Op* op = ops->at(i);
3584 visitor.visit(op);
3586 TRACE_LINEAR_SCAN(4, op->print_on(tty));
3588 // check if input operands are correct
3589 int j;
3590 int n = visitor.opr_count(LIR_OpVisitState::inputMode);
3591 for (j = 0; j < n; j++) {
3592 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::inputMode, j);
3593 if (opr->is_register() && LinearScan::is_processed_reg_num(reg_num(opr))) {
3594 Interval* interval = interval_at(reg_num(opr));
3595 if (op->id() != -1) {
3596 interval = interval->split_child_at_op_id(op->id(), LIR_OpVisitState::inputMode);
3597 }
3599 has_error |= check_state(input_state, interval->assigned_reg(), interval->split_parent());
3600 has_error |= check_state(input_state, interval->assigned_regHi(), interval->split_parent());
3602 // When an operand is marked with is_last_use, then the fpu stack allocator
3603 // removes the register from the fpu stack -> the register contains no value
3604 if (opr->is_last_use()) {
3605 state_put(input_state, interval->assigned_reg(), NULL);
3606 state_put(input_state, interval->assigned_regHi(), NULL);
3607 }
3608 }
3609 }
3611 // invalidate all caller save registers at calls
3612 if (visitor.has_call()) {
3613 for (j = 0; j < FrameMap::nof_caller_save_cpu_regs(); j++) {
3614 state_put(input_state, reg_num(FrameMap::caller_save_cpu_reg_at(j)), NULL);
3615 }
3616 for (j = 0; j < FrameMap::nof_caller_save_fpu_regs; j++) {
3617 state_put(input_state, reg_num(FrameMap::caller_save_fpu_reg_at(j)), NULL);
3618 }
3620 #ifdef X86
3621 for (j = 0; j < FrameMap::nof_caller_save_xmm_regs; j++) {
3622 state_put(input_state, reg_num(FrameMap::caller_save_xmm_reg_at(j)), NULL);
3623 }
3624 #endif
3625 }
3627 // process xhandler before output and temp operands
3628 XHandlers* xhandlers = visitor.all_xhandler();
3629 n = xhandlers->length();
3630 for (int k = 0; k < n; k++) {
3631 process_xhandler(xhandlers->handler_at(k), input_state);
3632 }
3634 // set temp operands (some operations use temp operands also as output operands, so can't set them NULL)
3635 n = visitor.opr_count(LIR_OpVisitState::tempMode);
3636 for (j = 0; j < n; j++) {
3637 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::tempMode, j);
3638 if (opr->is_register() && LinearScan::is_processed_reg_num(reg_num(opr))) {
3639 Interval* interval = interval_at(reg_num(opr));
3640 if (op->id() != -1) {
3641 interval = interval->split_child_at_op_id(op->id(), LIR_OpVisitState::tempMode);
3642 }
3644 state_put(input_state, interval->assigned_reg(), interval->split_parent());
3645 state_put(input_state, interval->assigned_regHi(), interval->split_parent());
3646 }
3647 }
3649 // set output operands
3650 n = visitor.opr_count(LIR_OpVisitState::outputMode);
3651 for (j = 0; j < n; j++) {
3652 LIR_Opr opr = visitor.opr_at(LIR_OpVisitState::outputMode, j);
3653 if (opr->is_register() && LinearScan::is_processed_reg_num(reg_num(opr))) {
3654 Interval* interval = interval_at(reg_num(opr));
3655 if (op->id() != -1) {
3656 interval = interval->split_child_at_op_id(op->id(), LIR_OpVisitState::outputMode);
3657 }
3659 state_put(input_state, interval->assigned_reg(), interval->split_parent());
3660 state_put(input_state, interval->assigned_regHi(), interval->split_parent());
3661 }
3662 }
3663 }
3664 assert(has_error == false, "Error in register allocation");
3665 }
3667 #endif // ASSERT
3671 // **** Implementation of MoveResolver ******************************
3673 MoveResolver::MoveResolver(LinearScan* allocator) :
3674 _allocator(allocator),
3675 _multiple_reads_allowed(false),
3676 _mapping_from(8),
3677 _mapping_from_opr(8),
3678 _mapping_to(8),
3679 _insert_list(NULL),
3680 _insert_idx(-1),
3681 _insertion_buffer()
3682 {
3683 for (int i = 0; i < LinearScan::nof_regs; i++) {
3684 _register_blocked[i] = 0;
3685 }
3686 DEBUG_ONLY(check_empty());
3687 }
3690 #ifdef ASSERT
3692 void MoveResolver::check_empty() {
3693 assert(_mapping_from.length() == 0 && _mapping_from_opr.length() == 0 && _mapping_to.length() == 0, "list must be empty before and after processing");
3694 for (int i = 0; i < LinearScan::nof_regs; i++) {
3695 assert(register_blocked(i) == 0, "register map must be empty before and after processing");
3696 }
3697 assert(_multiple_reads_allowed == false, "must have default value");
3698 }
3700 void MoveResolver::verify_before_resolve() {
3701 assert(_mapping_from.length() == _mapping_from_opr.length(), "length must be equal");
3702 assert(_mapping_from.length() == _mapping_to.length(), "length must be equal");
3703 assert(_insert_list != NULL && _insert_idx != -1, "insert position not set");
3705 int i, j;
3706 if (!_multiple_reads_allowed) {
3707 for (i = 0; i < _mapping_from.length(); i++) {
3708 for (j = i + 1; j < _mapping_from.length(); j++) {
3709 assert(_mapping_from.at(i) == NULL || _mapping_from.at(i) != _mapping_from.at(j), "cannot read from same interval twice");
3710 }
3711 }
3712 }
3714 for (i = 0; i < _mapping_to.length(); i++) {
3715 for (j = i + 1; j < _mapping_to.length(); j++) {
3716 assert(_mapping_to.at(i) != _mapping_to.at(j), "cannot write to same interval twice");
3717 }
3718 }
3721 BitMap used_regs(LinearScan::nof_regs + allocator()->frame_map()->argcount() + allocator()->max_spills());
3722 used_regs.clear();
3723 if (!_multiple_reads_allowed) {
3724 for (i = 0; i < _mapping_from.length(); i++) {
3725 Interval* it = _mapping_from.at(i);
3726 if (it != NULL) {
3727 assert(!used_regs.at(it->assigned_reg()), "cannot read from same register twice");
3728 used_regs.set_bit(it->assigned_reg());
3730 if (it->assigned_regHi() != LinearScan::any_reg) {
3731 assert(!used_regs.at(it->assigned_regHi()), "cannot read from same register twice");
3732 used_regs.set_bit(it->assigned_regHi());
3733 }
3734 }
3735 }
3736 }
3738 used_regs.clear();
3739 for (i = 0; i < _mapping_to.length(); i++) {
3740 Interval* it = _mapping_to.at(i);
3741 assert(!used_regs.at(it->assigned_reg()), "cannot write to same register twice");
3742 used_regs.set_bit(it->assigned_reg());
3744 if (it->assigned_regHi() != LinearScan::any_reg) {
3745 assert(!used_regs.at(it->assigned_regHi()), "cannot write to same register twice");
3746 used_regs.set_bit(it->assigned_regHi());
3747 }
3748 }
3750 used_regs.clear();
3751 for (i = 0; i < _mapping_from.length(); i++) {
3752 Interval* it = _mapping_from.at(i);
3753 if (it != NULL && it->assigned_reg() >= LinearScan::nof_regs) {
3754 used_regs.set_bit(it->assigned_reg());
3755 }
3756 }
3757 for (i = 0; i < _mapping_to.length(); i++) {
3758 Interval* it = _mapping_to.at(i);
3759 assert(!used_regs.at(it->assigned_reg()) || it->assigned_reg() == _mapping_from.at(i)->assigned_reg(), "stack slots used in _mapping_from must be disjoint to _mapping_to");
3760 }
3761 }
3763 #endif // ASSERT
3766 // mark assigned_reg and assigned_regHi of the interval as blocked
3767 void MoveResolver::block_registers(Interval* it) {
3768 int reg = it->assigned_reg();
3769 if (reg < LinearScan::nof_regs) {
3770 assert(_multiple_reads_allowed || register_blocked(reg) == 0, "register already marked as used");
3771 set_register_blocked(reg, 1);
3772 }
3773 reg = it->assigned_regHi();
3774 if (reg != LinearScan::any_reg && reg < LinearScan::nof_regs) {
3775 assert(_multiple_reads_allowed || register_blocked(reg) == 0, "register already marked as used");
3776 set_register_blocked(reg, 1);
3777 }
3778 }
3780 // mark assigned_reg and assigned_regHi of the interval as unblocked
3781 void MoveResolver::unblock_registers(Interval* it) {
3782 int reg = it->assigned_reg();
3783 if (reg < LinearScan::nof_regs) {
3784 assert(register_blocked(reg) > 0, "register already marked as unused");
3785 set_register_blocked(reg, -1);
3786 }
3787 reg = it->assigned_regHi();
3788 if (reg != LinearScan::any_reg && reg < LinearScan::nof_regs) {
3789 assert(register_blocked(reg) > 0, "register already marked as unused");
3790 set_register_blocked(reg, -1);
3791 }
3792 }
3794 // check if assigned_reg and assigned_regHi of the to-interval are not blocked (or only blocked by from)
3795 bool MoveResolver::save_to_process_move(Interval* from, Interval* to) {
3796 int from_reg = -1;
3797 int from_regHi = -1;
3798 if (from != NULL) {
3799 from_reg = from->assigned_reg();
3800 from_regHi = from->assigned_regHi();
3801 }
3803 int reg = to->assigned_reg();
3804 if (reg < LinearScan::nof_regs) {
3805 if (register_blocked(reg) > 1 || (register_blocked(reg) == 1 && reg != from_reg && reg != from_regHi)) {
3806 return false;
3807 }
3808 }
3809 reg = to->assigned_regHi();
3810 if (reg != LinearScan::any_reg && reg < LinearScan::nof_regs) {
3811 if (register_blocked(reg) > 1 || (register_blocked(reg) == 1 && reg != from_reg && reg != from_regHi)) {
3812 return false;
3813 }
3814 }
3816 return true;
3817 }
3820 void MoveResolver::create_insertion_buffer(LIR_List* list) {
3821 assert(!_insertion_buffer.initialized(), "overwriting existing buffer");
3822 _insertion_buffer.init(list);
3823 }
3825 void MoveResolver::append_insertion_buffer() {
3826 if (_insertion_buffer.initialized()) {
3827 _insertion_buffer.lir_list()->append(&_insertion_buffer);
3828 }
3829 assert(!_insertion_buffer.initialized(), "must be uninitialized now");
3831 _insert_list = NULL;
3832 _insert_idx = -1;
3833 }
3835 void MoveResolver::insert_move(Interval* from_interval, Interval* to_interval) {
3836 assert(from_interval->reg_num() != to_interval->reg_num(), "from and to interval equal");
3837 assert(from_interval->type() == to_interval->type(), "move between different types");
3838 assert(_insert_list != NULL && _insert_idx != -1, "must setup insert position first");
3839 assert(_insertion_buffer.lir_list() == _insert_list, "wrong insertion buffer");
3841 LIR_Opr from_opr = LIR_OprFact::virtual_register(from_interval->reg_num(), from_interval->type());
3842 LIR_Opr to_opr = LIR_OprFact::virtual_register(to_interval->reg_num(), to_interval->type());
3844 if (!_multiple_reads_allowed) {
3845 // the last_use flag is an optimization for FPU stack allocation. When the same
3846 // input interval is used in more than one move, then it is too difficult to determine
3847 // if this move is really the last use.
3848 from_opr = from_opr->make_last_use();
3849 }
3850 _insertion_buffer.move(_insert_idx, from_opr, to_opr);
3852 TRACE_LINEAR_SCAN(4, tty->print_cr("MoveResolver: inserted move from register %d (%d, %d) to %d (%d, %d)", from_interval->reg_num(), from_interval->assigned_reg(), from_interval->assigned_regHi(), to_interval->reg_num(), to_interval->assigned_reg(), to_interval->assigned_regHi()));
3853 }
3855 void MoveResolver::insert_move(LIR_Opr from_opr, Interval* to_interval) {
3856 assert(from_opr->type() == to_interval->type(), "move between different types");
3857 assert(_insert_list != NULL && _insert_idx != -1, "must setup insert position first");
3858 assert(_insertion_buffer.lir_list() == _insert_list, "wrong insertion buffer");
3860 LIR_Opr to_opr = LIR_OprFact::virtual_register(to_interval->reg_num(), to_interval->type());
3861 _insertion_buffer.move(_insert_idx, from_opr, to_opr);
3863 TRACE_LINEAR_SCAN(4, tty->print("MoveResolver: inserted move from constant "); from_opr->print(); tty->print_cr(" to %d (%d, %d)", to_interval->reg_num(), to_interval->assigned_reg(), to_interval->assigned_regHi()));
3864 }
3867 void MoveResolver::resolve_mappings() {
3868 TRACE_LINEAR_SCAN(4, tty->print_cr("MoveResolver: resolving mappings for Block B%d, index %d", _insert_list->block() != NULL ? _insert_list->block()->block_id() : -1, _insert_idx));
3869 DEBUG_ONLY(verify_before_resolve());
3871 // Block all registers that are used as input operands of a move.
3872 // When a register is blocked, no move to this register is emitted.
3873 // This is necessary for detecting cycles in moves.
3874 int i;
3875 for (i = _mapping_from.length() - 1; i >= 0; i--) {
3876 Interval* from_interval = _mapping_from.at(i);
3877 if (from_interval != NULL) {
3878 block_registers(from_interval);
3879 }
3880 }
3882 int spill_candidate = -1;
3883 while (_mapping_from.length() > 0) {
3884 bool processed_interval = false;
3886 for (i = _mapping_from.length() - 1; i >= 0; i--) {
3887 Interval* from_interval = _mapping_from.at(i);
3888 Interval* to_interval = _mapping_to.at(i);
3890 if (save_to_process_move(from_interval, to_interval)) {
3891 // this inverval can be processed because target is free
3892 if (from_interval != NULL) {
3893 insert_move(from_interval, to_interval);
3894 unblock_registers(from_interval);
3895 } else {
3896 insert_move(_mapping_from_opr.at(i), to_interval);
3897 }
3898 _mapping_from.remove_at(i);
3899 _mapping_from_opr.remove_at(i);
3900 _mapping_to.remove_at(i);
3902 processed_interval = true;
3903 } else if (from_interval != NULL && from_interval->assigned_reg() < LinearScan::nof_regs) {
3904 // this interval cannot be processed now because target is not free
3905 // it starts in a register, so it is a possible candidate for spilling
3906 spill_candidate = i;
3907 }
3908 }
3910 if (!processed_interval) {
3911 // no move could be processed because there is a cycle in the move list
3912 // (e.g. r1 -> r2, r2 -> r1), so one interval must be spilled to memory
3913 assert(spill_candidate != -1, "no interval in register for spilling found");
3915 // create a new spill interval and assign a stack slot to it
3916 Interval* from_interval = _mapping_from.at(spill_candidate);
3917 Interval* spill_interval = new Interval(-1);
3918 spill_interval->set_type(from_interval->type());
3920 // add a dummy range because real position is difficult to calculate
3921 // Note: this range is a special case when the integrity of the allocation is checked
3922 spill_interval->add_range(1, 2);
3924 // do not allocate a new spill slot for temporary interval, but
3925 // use spill slot assigned to from_interval. Otherwise moves from
3926 // one stack slot to another can happen (not allowed by LIR_Assembler
3927 int spill_slot = from_interval->canonical_spill_slot();
3928 if (spill_slot < 0) {
3929 spill_slot = allocator()->allocate_spill_slot(type2spill_size[spill_interval->type()] == 2);
3930 from_interval->set_canonical_spill_slot(spill_slot);
3931 }
3932 spill_interval->assign_reg(spill_slot);
3933 allocator()->append_interval(spill_interval);
3935 TRACE_LINEAR_SCAN(4, tty->print_cr("created new Interval %d for spilling", spill_interval->reg_num()));
3937 // insert a move from register to stack and update the mapping
3938 insert_move(from_interval, spill_interval);
3939 _mapping_from.at_put(spill_candidate, spill_interval);
3940 unblock_registers(from_interval);
3941 }
3942 }
3944 // reset to default value
3945 _multiple_reads_allowed = false;
3947 // check that all intervals have been processed
3948 DEBUG_ONLY(check_empty());
3949 }
3952 void MoveResolver::set_insert_position(LIR_List* insert_list, int insert_idx) {
3953 TRACE_LINEAR_SCAN(4, tty->print_cr("MoveResolver: setting insert position to Block B%d, index %d", insert_list->block() != NULL ? insert_list->block()->block_id() : -1, insert_idx));
3954 assert(_insert_list == NULL && _insert_idx == -1, "use move_insert_position instead of set_insert_position when data already set");
3956 create_insertion_buffer(insert_list);
3957 _insert_list = insert_list;
3958 _insert_idx = insert_idx;
3959 }
3961 void MoveResolver::move_insert_position(LIR_List* insert_list, int insert_idx) {
3962 TRACE_LINEAR_SCAN(4, tty->print_cr("MoveResolver: moving insert position to Block B%d, index %d", insert_list->block() != NULL ? insert_list->block()->block_id() : -1, insert_idx));
3964 if (_insert_list != NULL && (insert_list != _insert_list || insert_idx != _insert_idx)) {
3965 // insert position changed -> resolve current mappings
3966 resolve_mappings();
3967 }
3969 if (insert_list != _insert_list) {
3970 // block changed -> append insertion_buffer because it is
3971 // bound to a specific block and create a new insertion_buffer
3972 append_insertion_buffer();
3973 create_insertion_buffer(insert_list);
3974 }
3976 _insert_list = insert_list;
3977 _insert_idx = insert_idx;
3978 }
3980 void MoveResolver::add_mapping(Interval* from_interval, Interval* to_interval) {
3981 TRACE_LINEAR_SCAN(4, tty->print_cr("MoveResolver: adding mapping from %d (%d, %d) to %d (%d, %d)", from_interval->reg_num(), from_interval->assigned_reg(), from_interval->assigned_regHi(), to_interval->reg_num(), to_interval->assigned_reg(), to_interval->assigned_regHi()));
3983 _mapping_from.append(from_interval);
3984 _mapping_from_opr.append(LIR_OprFact::illegalOpr);
3985 _mapping_to.append(to_interval);
3986 }
3989 void MoveResolver::add_mapping(LIR_Opr from_opr, Interval* to_interval) {
3990 TRACE_LINEAR_SCAN(4, tty->print("MoveResolver: adding mapping from "); from_opr->print(); tty->print_cr(" to %d (%d, %d)", to_interval->reg_num(), to_interval->assigned_reg(), to_interval->assigned_regHi()));
3991 assert(from_opr->is_constant(), "only for constants");
3993 _mapping_from.append(NULL);
3994 _mapping_from_opr.append(from_opr);
3995 _mapping_to.append(to_interval);
3996 }
3998 void MoveResolver::resolve_and_append_moves() {
3999 if (has_mappings()) {
4000 resolve_mappings();
4001 }
4002 append_insertion_buffer();
4003 }
4007 // **** Implementation of Range *************************************
4009 Range::Range(int from, int to, Range* next) :
4010 _from(from),
4011 _to(to),
4012 _next(next)
4013 {
4014 }
4016 // initialize sentinel
4017 Range* Range::_end = NULL;
4018 void Range::initialize(Arena* arena) {
4019 _end = new (arena) Range(max_jint, max_jint, NULL);
4020 }
4022 int Range::intersects_at(Range* r2) const {
4023 const Range* r1 = this;
4025 assert(r1 != NULL && r2 != NULL, "null ranges not allowed");
4026 assert(r1 != _end && r2 != _end, "empty ranges not allowed");
4028 do {
4029 if (r1->from() < r2->from()) {
4030 if (r1->to() <= r2->from()) {
4031 r1 = r1->next(); if (r1 == _end) return -1;
4032 } else {
4033 return r2->from();
4034 }
4035 } else if (r2->from() < r1->from()) {
4036 if (r2->to() <= r1->from()) {
4037 r2 = r2->next(); if (r2 == _end) return -1;
4038 } else {
4039 return r1->from();
4040 }
4041 } else { // r1->from() == r2->from()
4042 if (r1->from() == r1->to()) {
4043 r1 = r1->next(); if (r1 == _end) return -1;
4044 } else if (r2->from() == r2->to()) {
4045 r2 = r2->next(); if (r2 == _end) return -1;
4046 } else {
4047 return r1->from();
4048 }
4049 }
4050 } while (true);
4051 }
4053 #ifndef PRODUCT
4054 void Range::print(outputStream* out) const {
4055 out->print("[%d, %d[ ", _from, _to);
4056 }
4057 #endif
4061 // **** Implementation of Interval **********************************
4063 // initialize sentinel
4064 Interval* Interval::_end = NULL;
4065 void Interval::initialize(Arena* arena) {
4066 Range::initialize(arena);
4067 _end = new (arena) Interval(-1);
4068 }
4070 Interval::Interval(int reg_num) :
4071 _reg_num(reg_num),
4072 _type(T_ILLEGAL),
4073 _first(Range::end()),
4074 _use_pos_and_kinds(12),
4075 _current(Range::end()),
4076 _next(_end),
4077 _state(invalidState),
4078 _assigned_reg(LinearScan::any_reg),
4079 _assigned_regHi(LinearScan::any_reg),
4080 _cached_to(-1),
4081 _cached_opr(LIR_OprFact::illegalOpr),
4082 _cached_vm_reg(VMRegImpl::Bad()),
4083 _split_children(0),
4084 _canonical_spill_slot(-1),
4085 _insert_move_when_activated(false),
4086 _register_hint(NULL),
4087 _spill_state(noDefinitionFound),
4088 _spill_definition_pos(-1)
4089 {
4090 _split_parent = this;
4091 _current_split_child = this;
4092 }
4094 int Interval::calc_to() {
4095 assert(_first != Range::end(), "interval has no range");
4097 Range* r = _first;
4098 while (r->next() != Range::end()) {
4099 r = r->next();
4100 }
4101 return r->to();
4102 }
4105 #ifdef ASSERT
4106 // consistency check of split-children
4107 void Interval::check_split_children() {
4108 if (_split_children.length() > 0) {
4109 assert(is_split_parent(), "only split parents can have children");
4111 for (int i = 0; i < _split_children.length(); i++) {
4112 Interval* i1 = _split_children.at(i);
4114 assert(i1->split_parent() == this, "not a split child of this interval");
4115 assert(i1->type() == type(), "must be equal for all split children");
4116 assert(i1->canonical_spill_slot() == canonical_spill_slot(), "must be equal for all split children");
4118 for (int j = i + 1; j < _split_children.length(); j++) {
4119 Interval* i2 = _split_children.at(j);
4121 assert(i1->reg_num() != i2->reg_num(), "same register number");
4123 if (i1->from() < i2->from()) {
4124 assert(i1->to() <= i2->from() && i1->to() < i2->to(), "intervals overlapping");
4125 } else {
4126 assert(i2->from() < i1->from(), "intervals start at same op_id");
4127 assert(i2->to() <= i1->from() && i2->to() < i1->to(), "intervals overlapping");
4128 }
4129 }
4130 }
4131 }
4132 }
4133 #endif // ASSERT
4135 Interval* Interval::register_hint(bool search_split_child) const {
4136 if (!search_split_child) {
4137 return _register_hint;
4138 }
4140 if (_register_hint != NULL) {
4141 assert(_register_hint->is_split_parent(), "ony split parents are valid hint registers");
4143 if (_register_hint->assigned_reg() >= 0 && _register_hint->assigned_reg() < LinearScan::nof_regs) {
4144 return _register_hint;
4146 } else if (_register_hint->_split_children.length() > 0) {
4147 // search the first split child that has a register assigned
4148 int len = _register_hint->_split_children.length();
4149 for (int i = 0; i < len; i++) {
4150 Interval* cur = _register_hint->_split_children.at(i);
4152 if (cur->assigned_reg() >= 0 && cur->assigned_reg() < LinearScan::nof_regs) {
4153 return cur;
4154 }
4155 }
4156 }
4157 }
4159 // no hint interval found that has a register assigned
4160 return NULL;
4161 }
4164 Interval* Interval::split_child_at_op_id(int op_id, LIR_OpVisitState::OprMode mode) {
4165 assert(is_split_parent(), "can only be called for split parents");
4166 assert(op_id >= 0, "invalid op_id (method can not be called for spill moves)");
4168 Interval* result;
4169 if (_split_children.length() == 0) {
4170 result = this;
4171 } else {
4172 result = NULL;
4173 int len = _split_children.length();
4175 // in outputMode, the end of the interval (op_id == cur->to()) is not valid
4176 int to_offset = (mode == LIR_OpVisitState::outputMode ? 0 : 1);
4178 int i;
4179 for (i = 0; i < len; i++) {
4180 Interval* cur = _split_children.at(i);
4181 if (cur->from() <= op_id && op_id < cur->to() + to_offset) {
4182 if (i > 0) {
4183 // exchange current split child to start of list (faster access for next call)
4184 _split_children.at_put(i, _split_children.at(0));
4185 _split_children.at_put(0, cur);
4186 }
4188 // interval found
4189 result = cur;
4190 break;
4191 }
4192 }
4194 #ifdef ASSERT
4195 for (i = 0; i < len; i++) {
4196 Interval* tmp = _split_children.at(i);
4197 if (tmp != result && tmp->from() <= op_id && op_id < tmp->to() + to_offset) {
4198 tty->print_cr("two valid result intervals found for op_id %d: %d and %d", op_id, result->reg_num(), tmp->reg_num());
4199 result->print();
4200 tmp->print();
4201 assert(false, "two valid result intervals found");
4202 }
4203 }
4204 #endif
4205 }
4207 assert(result != NULL, "no matching interval found");
4208 assert(result->covers(op_id, mode), "op_id not covered by interval");
4210 return result;
4211 }
4214 // returns the last split child that ends before the given op_id
4215 Interval* Interval::split_child_before_op_id(int op_id) {
4216 assert(op_id >= 0, "invalid op_id");
4218 Interval* parent = split_parent();
4219 Interval* result = NULL;
4221 int len = parent->_split_children.length();
4222 assert(len > 0, "no split children available");
4224 for (int i = len - 1; i >= 0; i--) {
4225 Interval* cur = parent->_split_children.at(i);
4226 if (cur->to() <= op_id && (result == NULL || result->to() < cur->to())) {
4227 result = cur;
4228 }
4229 }
4231 assert(result != NULL, "no split child found");
4232 return result;
4233 }
4236 // checks if op_id is covered by any split child
4237 bool Interval::split_child_covers(int op_id, LIR_OpVisitState::OprMode mode) {
4238 assert(is_split_parent(), "can only be called for split parents");
4239 assert(op_id >= 0, "invalid op_id (method can not be called for spill moves)");
4241 if (_split_children.length() == 0) {
4242 // simple case if interval was not split
4243 return covers(op_id, mode);
4245 } else {
4246 // extended case: check all split children
4247 int len = _split_children.length();
4248 for (int i = 0; i < len; i++) {
4249 Interval* cur = _split_children.at(i);
4250 if (cur->covers(op_id, mode)) {
4251 return true;
4252 }
4253 }
4254 return false;
4255 }
4256 }
4259 // Note: use positions are sorted descending -> first use has highest index
4260 int Interval::first_usage(IntervalUseKind min_use_kind) const {
4261 assert(LinearScan::is_virtual_interval(this), "cannot access use positions for fixed intervals");
4263 for (int i = _use_pos_and_kinds.length() - 2; i >= 0; i -= 2) {
4264 if (_use_pos_and_kinds.at(i + 1) >= min_use_kind) {
4265 return _use_pos_and_kinds.at(i);
4266 }
4267 }
4268 return max_jint;
4269 }
4271 int Interval::next_usage(IntervalUseKind min_use_kind, int from) const {
4272 assert(LinearScan::is_virtual_interval(this), "cannot access use positions for fixed intervals");
4274 for (int i = _use_pos_and_kinds.length() - 2; i >= 0; i -= 2) {
4275 if (_use_pos_and_kinds.at(i) >= from && _use_pos_and_kinds.at(i + 1) >= min_use_kind) {
4276 return _use_pos_and_kinds.at(i);
4277 }
4278 }
4279 return max_jint;
4280 }
4282 int Interval::next_usage_exact(IntervalUseKind exact_use_kind, int from) const {
4283 assert(LinearScan::is_virtual_interval(this), "cannot access use positions for fixed intervals");
4285 for (int i = _use_pos_and_kinds.length() - 2; i >= 0; i -= 2) {
4286 if (_use_pos_and_kinds.at(i) >= from && _use_pos_and_kinds.at(i + 1) == exact_use_kind) {
4287 return _use_pos_and_kinds.at(i);
4288 }
4289 }
4290 return max_jint;
4291 }
4293 int Interval::previous_usage(IntervalUseKind min_use_kind, int from) const {
4294 assert(LinearScan::is_virtual_interval(this), "cannot access use positions for fixed intervals");
4296 int prev = 0;
4297 for (int i = _use_pos_and_kinds.length() - 2; i >= 0; i -= 2) {
4298 if (_use_pos_and_kinds.at(i) > from) {
4299 return prev;
4300 }
4301 if (_use_pos_and_kinds.at(i + 1) >= min_use_kind) {
4302 prev = _use_pos_and_kinds.at(i);
4303 }
4304 }
4305 return prev;
4306 }
4308 void Interval::add_use_pos(int pos, IntervalUseKind use_kind) {
4309 assert(covers(pos, LIR_OpVisitState::inputMode), "use position not covered by live range");
4311 // do not add use positions for precolored intervals because
4312 // they are never used
4313 if (use_kind != noUse && reg_num() >= LIR_OprDesc::vreg_base) {
4314 #ifdef ASSERT
4315 assert(_use_pos_and_kinds.length() % 2 == 0, "must be");
4316 for (int i = 0; i < _use_pos_and_kinds.length(); i += 2) {
4317 assert(pos <= _use_pos_and_kinds.at(i), "already added a use-position with lower position");
4318 assert(_use_pos_and_kinds.at(i + 1) >= firstValidKind && _use_pos_and_kinds.at(i + 1) <= lastValidKind, "invalid use kind");
4319 if (i > 0) {
4320 assert(_use_pos_and_kinds.at(i) < _use_pos_and_kinds.at(i - 2), "not sorted descending");
4321 }
4322 }
4323 #endif
4325 // Note: add_use is called in descending order, so list gets sorted
4326 // automatically by just appending new use positions
4327 int len = _use_pos_and_kinds.length();
4328 if (len == 0 || _use_pos_and_kinds.at(len - 2) > pos) {
4329 _use_pos_and_kinds.append(pos);
4330 _use_pos_and_kinds.append(use_kind);
4331 } else if (_use_pos_and_kinds.at(len - 1) < use_kind) {
4332 assert(_use_pos_and_kinds.at(len - 2) == pos, "list not sorted correctly");
4333 _use_pos_and_kinds.at_put(len - 1, use_kind);
4334 }
4335 }
4336 }
4338 void Interval::add_range(int from, int to) {
4339 assert(from < to, "invalid range");
4340 assert(first() == Range::end() || to < first()->next()->from(), "not inserting at begin of interval");
4341 assert(from <= first()->to(), "not inserting at begin of interval");
4343 if (first()->from() <= to) {
4344 // join intersecting ranges
4345 first()->set_from(MIN2(from, first()->from()));
4346 first()->set_to (MAX2(to, first()->to()));
4347 } else {
4348 // insert new range
4349 _first = new Range(from, to, first());
4350 }
4351 }
4353 Interval* Interval::new_split_child() {
4354 // allocate new interval
4355 Interval* result = new Interval(-1);
4356 result->set_type(type());
4358 Interval* parent = split_parent();
4359 result->_split_parent = parent;
4360 result->set_register_hint(parent);
4362 // insert new interval in children-list of parent
4363 if (parent->_split_children.length() == 0) {
4364 assert(is_split_parent(), "list must be initialized at first split");
4366 parent->_split_children = IntervalList(4);
4367 parent->_split_children.append(this);
4368 }
4369 parent->_split_children.append(result);
4371 return result;
4372 }
4374 // split this interval at the specified position and return
4375 // the remainder as a new interval.
4376 //
4377 // when an interval is split, a bi-directional link is established between the original interval
4378 // (the split parent) and the intervals that are split off this interval (the split children)
4379 // When a split child is split again, the new created interval is also a direct child
4380 // of the original parent (there is no tree of split children stored, but a flat list)
4381 // All split children are spilled to the same stack slot (stored in _canonical_spill_slot)
4382 //
4383 // Note: The new interval has no valid reg_num
4384 Interval* Interval::split(int split_pos) {
4385 assert(LinearScan::is_virtual_interval(this), "cannot split fixed intervals");
4387 // allocate new interval
4388 Interval* result = new_split_child();
4390 // split the ranges
4391 Range* prev = NULL;
4392 Range* cur = _first;
4393 while (cur != Range::end() && cur->to() <= split_pos) {
4394 prev = cur;
4395 cur = cur->next();
4396 }
4397 assert(cur != Range::end(), "split interval after end of last range");
4399 if (cur->from() < split_pos) {
4400 result->_first = new Range(split_pos, cur->to(), cur->next());
4401 cur->set_to(split_pos);
4402 cur->set_next(Range::end());
4404 } else {
4405 assert(prev != NULL, "split before start of first range");
4406 result->_first = cur;
4407 prev->set_next(Range::end());
4408 }
4409 result->_current = result->_first;
4410 _cached_to = -1; // clear cached value
4412 // split list of use positions
4413 int total_len = _use_pos_and_kinds.length();
4414 int start_idx = total_len - 2;
4415 while (start_idx >= 0 && _use_pos_and_kinds.at(start_idx) < split_pos) {
4416 start_idx -= 2;
4417 }
4419 intStack new_use_pos_and_kinds(total_len - start_idx);
4420 int i;
4421 for (i = start_idx + 2; i < total_len; i++) {
4422 new_use_pos_and_kinds.append(_use_pos_and_kinds.at(i));
4423 }
4425 _use_pos_and_kinds.truncate(start_idx + 2);
4426 result->_use_pos_and_kinds = _use_pos_and_kinds;
4427 _use_pos_and_kinds = new_use_pos_and_kinds;
4429 #ifdef ASSERT
4430 assert(_use_pos_and_kinds.length() % 2 == 0, "must have use kind for each use pos");
4431 assert(result->_use_pos_and_kinds.length() % 2 == 0, "must have use kind for each use pos");
4432 assert(_use_pos_and_kinds.length() + result->_use_pos_and_kinds.length() == total_len, "missed some entries");
4434 for (i = 0; i < _use_pos_and_kinds.length(); i += 2) {
4435 assert(_use_pos_and_kinds.at(i) < split_pos, "must be");
4436 assert(_use_pos_and_kinds.at(i + 1) >= firstValidKind && _use_pos_and_kinds.at(i + 1) <= lastValidKind, "invalid use kind");
4437 }
4438 for (i = 0; i < result->_use_pos_and_kinds.length(); i += 2) {
4439 assert(result->_use_pos_and_kinds.at(i) >= split_pos, "must be");
4440 assert(result->_use_pos_and_kinds.at(i + 1) >= firstValidKind && result->_use_pos_and_kinds.at(i + 1) <= lastValidKind, "invalid use kind");
4441 }
4442 #endif
4444 return result;
4445 }
4447 // split this interval at the specified position and return
4448 // the head as a new interval (the original interval is the tail)
4449 //
4450 // Currently, only the first range can be split, and the new interval
4451 // must not have split positions
4452 Interval* Interval::split_from_start(int split_pos) {
4453 assert(LinearScan::is_virtual_interval(this), "cannot split fixed intervals");
4454 assert(split_pos > from() && split_pos < to(), "can only split inside interval");
4455 assert(split_pos > _first->from() && split_pos <= _first->to(), "can only split inside first range");
4456 assert(first_usage(noUse) > split_pos, "can not split when use positions are present");
4458 // allocate new interval
4459 Interval* result = new_split_child();
4461 // the new created interval has only one range (checked by assertion above),
4462 // so the splitting of the ranges is very simple
4463 result->add_range(_first->from(), split_pos);
4465 if (split_pos == _first->to()) {
4466 assert(_first->next() != Range::end(), "must not be at end");
4467 _first = _first->next();
4468 } else {
4469 _first->set_from(split_pos);
4470 }
4472 return result;
4473 }
4476 // returns true if the op_id is inside the interval
4477 bool Interval::covers(int op_id, LIR_OpVisitState::OprMode mode) const {
4478 Range* cur = _first;
4480 while (cur != Range::end() && cur->to() < op_id) {
4481 cur = cur->next();
4482 }
4483 if (cur != Range::end()) {
4484 assert(cur->to() != cur->next()->from(), "ranges not separated");
4486 if (mode == LIR_OpVisitState::outputMode) {
4487 return cur->from() <= op_id && op_id < cur->to();
4488 } else {
4489 return cur->from() <= op_id && op_id <= cur->to();
4490 }
4491 }
4492 return false;
4493 }
4495 // returns true if the interval has any hole between hole_from and hole_to
4496 // (even if the hole has only the length 1)
4497 bool Interval::has_hole_between(int hole_from, int hole_to) {
4498 assert(hole_from < hole_to, "check");
4499 assert(from() <= hole_from && hole_to <= to(), "index out of interval");
4501 Range* cur = _first;
4502 while (cur != Range::end()) {
4503 assert(cur->to() < cur->next()->from(), "no space between ranges");
4505 // hole-range starts before this range -> hole
4506 if (hole_from < cur->from()) {
4507 return true;
4509 // hole-range completely inside this range -> no hole
4510 } else if (hole_to <= cur->to()) {
4511 return false;
4513 // overlapping of hole-range with this range -> hole
4514 } else if (hole_from <= cur->to()) {
4515 return true;
4516 }
4518 cur = cur->next();
4519 }
4521 return false;
4522 }
4525 #ifndef PRODUCT
4526 void Interval::print(outputStream* out) const {
4527 const char* SpillState2Name[] = { "no definition", "no spill store", "one spill store", "store at definition", "start in memory", "no optimization" };
4528 const char* UseKind2Name[] = { "N", "L", "S", "M" };
4530 const char* type_name;
4531 LIR_Opr opr = LIR_OprFact::illegal();
4532 if (reg_num() < LIR_OprDesc::vreg_base) {
4533 type_name = "fixed";
4534 // need a temporary operand for fixed intervals because type() cannot be called
4535 if (assigned_reg() >= pd_first_cpu_reg && assigned_reg() <= pd_last_cpu_reg) {
4536 opr = LIR_OprFact::single_cpu(assigned_reg());
4537 } else if (assigned_reg() >= pd_first_fpu_reg && assigned_reg() <= pd_last_fpu_reg) {
4538 opr = LIR_OprFact::single_fpu(assigned_reg() - pd_first_fpu_reg);
4539 #ifdef X86
4540 } else if (assigned_reg() >= pd_first_xmm_reg && assigned_reg() <= pd_last_xmm_reg) {
4541 opr = LIR_OprFact::single_xmm(assigned_reg() - pd_first_xmm_reg);
4542 #endif
4543 } else {
4544 ShouldNotReachHere();
4545 }
4546 } else {
4547 type_name = type2name(type());
4548 if (assigned_reg() != -1 &&
4549 (LinearScan::num_physical_regs(type()) == 1 || assigned_regHi() != -1)) {
4550 opr = LinearScan::calc_operand_for_interval(this);
4551 }
4552 }
4554 out->print("%d %s ", reg_num(), type_name);
4555 if (opr->is_valid()) {
4556 out->print("\"");
4557 opr->print(out);
4558 out->print("\" ");
4559 }
4560 out->print("%d %d ", split_parent()->reg_num(), (register_hint(false) != NULL ? register_hint(false)->reg_num() : -1));
4562 // print ranges
4563 Range* cur = _first;
4564 while (cur != Range::end()) {
4565 cur->print(out);
4566 cur = cur->next();
4567 assert(cur != NULL, "range list not closed with range sentinel");
4568 }
4570 // print use positions
4571 int prev = 0;
4572 assert(_use_pos_and_kinds.length() % 2 == 0, "must be");
4573 for (int i =_use_pos_and_kinds.length() - 2; i >= 0; i -= 2) {
4574 assert(_use_pos_and_kinds.at(i + 1) >= firstValidKind && _use_pos_and_kinds.at(i + 1) <= lastValidKind, "invalid use kind");
4575 assert(prev < _use_pos_and_kinds.at(i), "use positions not sorted");
4577 out->print("%d %s ", _use_pos_and_kinds.at(i), UseKind2Name[_use_pos_and_kinds.at(i + 1)]);
4578 prev = _use_pos_and_kinds.at(i);
4579 }
4581 out->print(" \"%s\"", SpillState2Name[spill_state()]);
4582 out->cr();
4583 }
4584 #endif
4588 // **** Implementation of IntervalWalker ****************************
4590 IntervalWalker::IntervalWalker(LinearScan* allocator, Interval* unhandled_fixed_first, Interval* unhandled_any_first)
4591 : _compilation(allocator->compilation())
4592 , _allocator(allocator)
4593 {
4594 _unhandled_first[fixedKind] = unhandled_fixed_first;
4595 _unhandled_first[anyKind] = unhandled_any_first;
4596 _active_first[fixedKind] = Interval::end();
4597 _inactive_first[fixedKind] = Interval::end();
4598 _active_first[anyKind] = Interval::end();
4599 _inactive_first[anyKind] = Interval::end();
4600 _current_position = -1;
4601 _current = NULL;
4602 next_interval();
4603 }
4606 // append interval at top of list
4607 void IntervalWalker::append_unsorted(Interval** list, Interval* interval) {
4608 interval->set_next(*list); *list = interval;
4609 }
4612 // append interval in order of current range from()
4613 void IntervalWalker::append_sorted(Interval** list, Interval* interval) {
4614 Interval* prev = NULL;
4615 Interval* cur = *list;
4616 while (cur->current_from() < interval->current_from()) {
4617 prev = cur; cur = cur->next();
4618 }
4619 if (prev == NULL) {
4620 *list = interval;
4621 } else {
4622 prev->set_next(interval);
4623 }
4624 interval->set_next(cur);
4625 }
4627 void IntervalWalker::append_to_unhandled(Interval** list, Interval* interval) {
4628 assert(interval->from() >= current()->current_from(), "cannot append new interval before current walk position");
4630 Interval* prev = NULL;
4631 Interval* cur = *list;
4632 while (cur->from() < interval->from() || (cur->from() == interval->from() && cur->first_usage(noUse) < interval->first_usage(noUse))) {
4633 prev = cur; cur = cur->next();
4634 }
4635 if (prev == NULL) {
4636 *list = interval;
4637 } else {
4638 prev->set_next(interval);
4639 }
4640 interval->set_next(cur);
4641 }
4644 inline bool IntervalWalker::remove_from_list(Interval** list, Interval* i) {
4645 while (*list != Interval::end() && *list != i) {
4646 list = (*list)->next_addr();
4647 }
4648 if (*list != Interval::end()) {
4649 assert(*list == i, "check");
4650 *list = (*list)->next();
4651 return true;
4652 } else {
4653 return false;
4654 }
4655 }
4657 void IntervalWalker::remove_from_list(Interval* i) {
4658 bool deleted;
4660 if (i->state() == activeState) {
4661 deleted = remove_from_list(active_first_addr(anyKind), i);
4662 } else {
4663 assert(i->state() == inactiveState, "invalid state");
4664 deleted = remove_from_list(inactive_first_addr(anyKind), i);
4665 }
4667 assert(deleted, "interval has not been found in list");
4668 }
4671 void IntervalWalker::walk_to(IntervalState state, int from) {
4672 assert (state == activeState || state == inactiveState, "wrong state");
4673 for_each_interval_kind(kind) {
4674 Interval** prev = state == activeState ? active_first_addr(kind) : inactive_first_addr(kind);
4675 Interval* next = *prev;
4676 while (next->current_from() <= from) {
4677 Interval* cur = next;
4678 next = cur->next();
4680 bool range_has_changed = false;
4681 while (cur->current_to() <= from) {
4682 cur->next_range();
4683 range_has_changed = true;
4684 }
4686 // also handle move from inactive list to active list
4687 range_has_changed = range_has_changed || (state == inactiveState && cur->current_from() <= from);
4689 if (range_has_changed) {
4690 // remove cur from list
4691 *prev = next;
4692 if (cur->current_at_end()) {
4693 // move to handled state (not maintained as a list)
4694 cur->set_state(handledState);
4695 interval_moved(cur, kind, state, handledState);
4696 } else if (cur->current_from() <= from){
4697 // sort into active list
4698 append_sorted(active_first_addr(kind), cur);
4699 cur->set_state(activeState);
4700 if (*prev == cur) {
4701 assert(state == activeState, "check");
4702 prev = cur->next_addr();
4703 }
4704 interval_moved(cur, kind, state, activeState);
4705 } else {
4706 // sort into inactive list
4707 append_sorted(inactive_first_addr(kind), cur);
4708 cur->set_state(inactiveState);
4709 if (*prev == cur) {
4710 assert(state == inactiveState, "check");
4711 prev = cur->next_addr();
4712 }
4713 interval_moved(cur, kind, state, inactiveState);
4714 }
4715 } else {
4716 prev = cur->next_addr();
4717 continue;
4718 }
4719 }
4720 }
4721 }
4724 void IntervalWalker::next_interval() {
4725 IntervalKind kind;
4726 Interval* any = _unhandled_first[anyKind];
4727 Interval* fixed = _unhandled_first[fixedKind];
4729 if (any != Interval::end()) {
4730 // intervals may start at same position -> prefer fixed interval
4731 kind = fixed != Interval::end() && fixed->from() <= any->from() ? fixedKind : anyKind;
4733 assert (kind == fixedKind && fixed->from() <= any->from() ||
4734 kind == anyKind && any->from() <= fixed->from(), "wrong interval!!!");
4735 assert(any == Interval::end() || fixed == Interval::end() || any->from() != fixed->from() || kind == fixedKind, "if fixed and any-Interval start at same position, fixed must be processed first");
4737 } else if (fixed != Interval::end()) {
4738 kind = fixedKind;
4739 } else {
4740 _current = NULL; return;
4741 }
4742 _current_kind = kind;
4743 _current = _unhandled_first[kind];
4744 _unhandled_first[kind] = _current->next();
4745 _current->set_next(Interval::end());
4746 _current->rewind_range();
4747 }
4750 void IntervalWalker::walk_to(int lir_op_id) {
4751 assert(_current_position <= lir_op_id, "can not walk backwards");
4752 while (current() != NULL) {
4753 bool is_active = current()->from() <= lir_op_id;
4754 int id = is_active ? current()->from() : lir_op_id;
4756 TRACE_LINEAR_SCAN(2, if (_current_position < id) { tty->cr(); tty->print_cr("walk_to(%d) **************************************************************", id); })
4758 // set _current_position prior to call of walk_to
4759 _current_position = id;
4761 // call walk_to even if _current_position == id
4762 walk_to(activeState, id);
4763 walk_to(inactiveState, id);
4765 if (is_active) {
4766 current()->set_state(activeState);
4767 if (activate_current()) {
4768 append_sorted(active_first_addr(current_kind()), current());
4769 interval_moved(current(), current_kind(), unhandledState, activeState);
4770 }
4772 next_interval();
4773 } else {
4774 return;
4775 }
4776 }
4777 }
4779 void IntervalWalker::interval_moved(Interval* interval, IntervalKind kind, IntervalState from, IntervalState to) {
4780 #ifndef PRODUCT
4781 if (TraceLinearScanLevel >= 4) {
4782 #define print_state(state) \
4783 switch(state) {\
4784 case unhandledState: tty->print("unhandled"); break;\
4785 case activeState: tty->print("active"); break;\
4786 case inactiveState: tty->print("inactive"); break;\
4787 case handledState: tty->print("handled"); break;\
4788 default: ShouldNotReachHere(); \
4789 }
4791 print_state(from); tty->print(" to "); print_state(to);
4792 tty->fill_to(23);
4793 interval->print();
4795 #undef print_state
4796 }
4797 #endif
4798 }
4802 // **** Implementation of LinearScanWalker **************************
4804 LinearScanWalker::LinearScanWalker(LinearScan* allocator, Interval* unhandled_fixed_first, Interval* unhandled_any_first)
4805 : IntervalWalker(allocator, unhandled_fixed_first, unhandled_any_first)
4806 , _move_resolver(allocator)
4807 {
4808 for (int i = 0; i < LinearScan::nof_regs; i++) {
4809 _spill_intervals[i] = new IntervalList(2);
4810 }
4811 }
4814 inline void LinearScanWalker::init_use_lists(bool only_process_use_pos) {
4815 for (int i = _first_reg; i <= _last_reg; i++) {
4816 _use_pos[i] = max_jint;
4818 if (!only_process_use_pos) {
4819 _block_pos[i] = max_jint;
4820 _spill_intervals[i]->clear();
4821 }
4822 }
4823 }
4825 inline void LinearScanWalker::exclude_from_use(int reg) {
4826 assert(reg < LinearScan::nof_regs, "interval must have a register assigned (stack slots not allowed)");
4827 if (reg >= _first_reg && reg <= _last_reg) {
4828 _use_pos[reg] = 0;
4829 }
4830 }
4831 inline void LinearScanWalker::exclude_from_use(Interval* i) {
4832 assert(i->assigned_reg() != any_reg, "interval has no register assigned");
4834 exclude_from_use(i->assigned_reg());
4835 exclude_from_use(i->assigned_regHi());
4836 }
4838 inline void LinearScanWalker::set_use_pos(int reg, Interval* i, int use_pos, bool only_process_use_pos) {
4839 assert(use_pos != 0, "must use exclude_from_use to set use_pos to 0");
4841 if (reg >= _first_reg && reg <= _last_reg) {
4842 if (_use_pos[reg] > use_pos) {
4843 _use_pos[reg] = use_pos;
4844 }
4845 if (!only_process_use_pos) {
4846 _spill_intervals[reg]->append(i);
4847 }
4848 }
4849 }
4850 inline void LinearScanWalker::set_use_pos(Interval* i, int use_pos, bool only_process_use_pos) {
4851 assert(i->assigned_reg() != any_reg, "interval has no register assigned");
4852 if (use_pos != -1) {
4853 set_use_pos(i->assigned_reg(), i, use_pos, only_process_use_pos);
4854 set_use_pos(i->assigned_regHi(), i, use_pos, only_process_use_pos);
4855 }
4856 }
4858 inline void LinearScanWalker::set_block_pos(int reg, Interval* i, int block_pos) {
4859 if (reg >= _first_reg && reg <= _last_reg) {
4860 if (_block_pos[reg] > block_pos) {
4861 _block_pos[reg] = block_pos;
4862 }
4863 if (_use_pos[reg] > block_pos) {
4864 _use_pos[reg] = block_pos;
4865 }
4866 }
4867 }
4868 inline void LinearScanWalker::set_block_pos(Interval* i, int block_pos) {
4869 assert(i->assigned_reg() != any_reg, "interval has no register assigned");
4870 if (block_pos != -1) {
4871 set_block_pos(i->assigned_reg(), i, block_pos);
4872 set_block_pos(i->assigned_regHi(), i, block_pos);
4873 }
4874 }
4877 void LinearScanWalker::free_exclude_active_fixed() {
4878 Interval* list = active_first(fixedKind);
4879 while (list != Interval::end()) {
4880 assert(list->assigned_reg() < LinearScan::nof_regs, "active interval must have a register assigned");
4881 exclude_from_use(list);
4882 list = list->next();
4883 }
4884 }
4886 void LinearScanWalker::free_exclude_active_any() {
4887 Interval* list = active_first(anyKind);
4888 while (list != Interval::end()) {
4889 exclude_from_use(list);
4890 list = list->next();
4891 }
4892 }
4894 void LinearScanWalker::free_collect_inactive_fixed(Interval* cur) {
4895 Interval* list = inactive_first(fixedKind);
4896 while (list != Interval::end()) {
4897 if (cur->to() <= list->current_from()) {
4898 assert(list->current_intersects_at(cur) == -1, "must not intersect");
4899 set_use_pos(list, list->current_from(), true);
4900 } else {
4901 set_use_pos(list, list->current_intersects_at(cur), true);
4902 }
4903 list = list->next();
4904 }
4905 }
4907 void LinearScanWalker::free_collect_inactive_any(Interval* cur) {
4908 Interval* list = inactive_first(anyKind);
4909 while (list != Interval::end()) {
4910 set_use_pos(list, list->current_intersects_at(cur), true);
4911 list = list->next();
4912 }
4913 }
4915 void LinearScanWalker::free_collect_unhandled(IntervalKind kind, Interval* cur) {
4916 Interval* list = unhandled_first(kind);
4917 while (list != Interval::end()) {
4918 set_use_pos(list, list->intersects_at(cur), true);
4919 if (kind == fixedKind && cur->to() <= list->from()) {
4920 set_use_pos(list, list->from(), true);
4921 }
4922 list = list->next();
4923 }
4924 }
4926 void LinearScanWalker::spill_exclude_active_fixed() {
4927 Interval* list = active_first(fixedKind);
4928 while (list != Interval::end()) {
4929 exclude_from_use(list);
4930 list = list->next();
4931 }
4932 }
4934 void LinearScanWalker::spill_block_unhandled_fixed(Interval* cur) {
4935 Interval* list = unhandled_first(fixedKind);
4936 while (list != Interval::end()) {
4937 set_block_pos(list, list->intersects_at(cur));
4938 list = list->next();
4939 }
4940 }
4942 void LinearScanWalker::spill_block_inactive_fixed(Interval* cur) {
4943 Interval* list = inactive_first(fixedKind);
4944 while (list != Interval::end()) {
4945 if (cur->to() > list->current_from()) {
4946 set_block_pos(list, list->current_intersects_at(cur));
4947 } else {
4948 assert(list->current_intersects_at(cur) == -1, "invalid optimization: intervals intersect");
4949 }
4951 list = list->next();
4952 }
4953 }
4955 void LinearScanWalker::spill_collect_active_any() {
4956 Interval* list = active_first(anyKind);
4957 while (list != Interval::end()) {
4958 set_use_pos(list, MIN2(list->next_usage(loopEndMarker, _current_position), list->to()), false);
4959 list = list->next();
4960 }
4961 }
4963 void LinearScanWalker::spill_collect_inactive_any(Interval* cur) {
4964 Interval* list = inactive_first(anyKind);
4965 while (list != Interval::end()) {
4966 if (list->current_intersects(cur)) {
4967 set_use_pos(list, MIN2(list->next_usage(loopEndMarker, _current_position), list->to()), false);
4968 }
4969 list = list->next();
4970 }
4971 }
4974 void LinearScanWalker::insert_move(int op_id, Interval* src_it, Interval* dst_it) {
4975 // output all moves here. When source and target are equal, the move is
4976 // optimized away later in assign_reg_nums
4978 op_id = (op_id + 1) & ~1;
4979 BlockBegin* op_block = allocator()->block_of_op_with_id(op_id);
4980 assert(op_id > 0 && allocator()->block_of_op_with_id(op_id - 2) == op_block, "cannot insert move at block boundary");
4982 // calculate index of instruction inside instruction list of current block
4983 // the minimal index (for a block with no spill moves) can be calculated because the
4984 // numbering of instructions is known.
4985 // When the block already contains spill moves, the index must be increased until the
4986 // correct index is reached.
4987 LIR_OpList* list = op_block->lir()->instructions_list();
4988 int index = (op_id - list->at(0)->id()) / 2;
4989 assert(list->at(index)->id() <= op_id, "error in calculation");
4991 while (list->at(index)->id() != op_id) {
4992 index++;
4993 assert(0 <= index && index < list->length(), "index out of bounds");
4994 }
4995 assert(1 <= index && index < list->length(), "index out of bounds");
4996 assert(list->at(index)->id() == op_id, "error in calculation");
4998 // insert new instruction before instruction at position index
4999 _move_resolver.move_insert_position(op_block->lir(), index - 1);
5000 _move_resolver.add_mapping(src_it, dst_it);
5001 }
5004 int LinearScanWalker::find_optimal_split_pos(BlockBegin* min_block, BlockBegin* max_block, int max_split_pos) {
5005 int from_block_nr = min_block->linear_scan_number();
5006 int to_block_nr = max_block->linear_scan_number();
5008 assert(0 <= from_block_nr && from_block_nr < block_count(), "out of range");
5009 assert(0 <= to_block_nr && to_block_nr < block_count(), "out of range");
5010 assert(from_block_nr < to_block_nr, "must cross block boundary");
5012 // Try to split at end of max_block. If this would be after
5013 // max_split_pos, then use the begin of max_block
5014 int optimal_split_pos = max_block->last_lir_instruction_id() + 2;
5015 if (optimal_split_pos > max_split_pos) {
5016 optimal_split_pos = max_block->first_lir_instruction_id();
5017 }
5019 int min_loop_depth = max_block->loop_depth();
5020 for (int i = to_block_nr - 1; i >= from_block_nr; i--) {
5021 BlockBegin* cur = block_at(i);
5023 if (cur->loop_depth() < min_loop_depth) {
5024 // block with lower loop-depth found -> split at the end of this block
5025 min_loop_depth = cur->loop_depth();
5026 optimal_split_pos = cur->last_lir_instruction_id() + 2;
5027 }
5028 }
5029 assert(optimal_split_pos > allocator()->max_lir_op_id() || allocator()->is_block_begin(optimal_split_pos), "algorithm must move split pos to block boundary");
5031 return optimal_split_pos;
5032 }
5035 int LinearScanWalker::find_optimal_split_pos(Interval* it, int min_split_pos, int max_split_pos, bool do_loop_optimization) {
5036 int optimal_split_pos = -1;
5037 if (min_split_pos == max_split_pos) {
5038 // trivial case, no optimization of split position possible
5039 TRACE_LINEAR_SCAN(4, tty->print_cr(" min-pos and max-pos are equal, no optimization possible"));
5040 optimal_split_pos = min_split_pos;
5042 } else {
5043 assert(min_split_pos < max_split_pos, "must be true then");
5044 assert(min_split_pos > 0, "cannot access min_split_pos - 1 otherwise");
5046 // reason for using min_split_pos - 1: when the minimal split pos is exactly at the
5047 // beginning of a block, then min_split_pos is also a possible split position.
5048 // Use the block before as min_block, because then min_block->last_lir_instruction_id() + 2 == min_split_pos
5049 BlockBegin* min_block = allocator()->block_of_op_with_id(min_split_pos - 1);
5051 // reason for using max_split_pos - 1: otherwise there would be an assertion failure
5052 // when an interval ends at the end of the last block of the method
5053 // (in this case, max_split_pos == allocator()->max_lir_op_id() + 2, and there is no
5054 // block at this op_id)
5055 BlockBegin* max_block = allocator()->block_of_op_with_id(max_split_pos - 1);
5057 assert(min_block->linear_scan_number() <= max_block->linear_scan_number(), "invalid order");
5058 if (min_block == max_block) {
5059 // split position cannot be moved to block boundary, so split as late as possible
5060 TRACE_LINEAR_SCAN(4, tty->print_cr(" cannot move split pos to block boundary because min_pos and max_pos are in same block"));
5061 optimal_split_pos = max_split_pos;
5063 } else if (it->has_hole_between(max_split_pos - 1, max_split_pos) && !allocator()->is_block_begin(max_split_pos)) {
5064 // Do not move split position if the interval has a hole before max_split_pos.
5065 // Intervals resulting from Phi-Functions have more than one definition (marked
5066 // as mustHaveRegister) with a hole before each definition. When the register is needed
5067 // for the second definition, an earlier reloading is unnecessary.
5068 TRACE_LINEAR_SCAN(4, tty->print_cr(" interval has hole just before max_split_pos, so splitting at max_split_pos"));
5069 optimal_split_pos = max_split_pos;
5071 } else {
5072 // seach optimal block boundary between min_split_pos and max_split_pos
5073 TRACE_LINEAR_SCAN(4, tty->print_cr(" moving split pos to optimal block boundary between block B%d and B%d", min_block->block_id(), max_block->block_id()));
5075 if (do_loop_optimization) {
5076 // Loop optimization: if a loop-end marker is found between min- and max-position,
5077 // then split before this loop
5078 int loop_end_pos = it->next_usage_exact(loopEndMarker, min_block->last_lir_instruction_id() + 2);
5079 TRACE_LINEAR_SCAN(4, tty->print_cr(" loop optimization: loop end found at pos %d", loop_end_pos));
5081 assert(loop_end_pos > min_split_pos, "invalid order");
5082 if (loop_end_pos < max_split_pos) {
5083 // loop-end marker found between min- and max-position
5084 // if it is not the end marker for the same loop as the min-position, then move
5085 // the max-position to this loop block.
5086 // Desired result: uses tagged as shouldHaveRegister inside a loop cause a reloading
5087 // of the interval (normally, only mustHaveRegister causes a reloading)
5088 BlockBegin* loop_block = allocator()->block_of_op_with_id(loop_end_pos);
5090 TRACE_LINEAR_SCAN(4, tty->print_cr(" interval is used in loop that ends in block B%d, so trying to move max_block back from B%d to B%d", loop_block->block_id(), max_block->block_id(), loop_block->block_id()));
5091 assert(loop_block != min_block, "loop_block and min_block must be different because block boundary is needed between");
5093 optimal_split_pos = find_optimal_split_pos(min_block, loop_block, loop_block->last_lir_instruction_id() + 2);
5094 if (optimal_split_pos == loop_block->last_lir_instruction_id() + 2) {
5095 optimal_split_pos = -1;
5096 TRACE_LINEAR_SCAN(4, tty->print_cr(" loop optimization not necessary"));
5097 } else {
5098 TRACE_LINEAR_SCAN(4, tty->print_cr(" loop optimization successful"));
5099 }
5100 }
5101 }
5103 if (optimal_split_pos == -1) {
5104 // not calculated by loop optimization
5105 optimal_split_pos = find_optimal_split_pos(min_block, max_block, max_split_pos);
5106 }
5107 }
5108 }
5109 TRACE_LINEAR_SCAN(4, tty->print_cr(" optimal split position: %d", optimal_split_pos));
5111 return optimal_split_pos;
5112 }
5115 /*
5116 split an interval at the optimal position between min_split_pos and
5117 max_split_pos in two parts:
5118 1) the left part has already a location assigned
5119 2) the right part is sorted into to the unhandled-list
5120 */
5121 void LinearScanWalker::split_before_usage(Interval* it, int min_split_pos, int max_split_pos) {
5122 TRACE_LINEAR_SCAN(2, tty->print ("----- splitting interval: "); it->print());
5123 TRACE_LINEAR_SCAN(2, tty->print_cr(" between %d and %d", min_split_pos, max_split_pos));
5125 assert(it->from() < min_split_pos, "cannot split at start of interval");
5126 assert(current_position() < min_split_pos, "cannot split before current position");
5127 assert(min_split_pos <= max_split_pos, "invalid order");
5128 assert(max_split_pos <= it->to(), "cannot split after end of interval");
5130 int optimal_split_pos = find_optimal_split_pos(it, min_split_pos, max_split_pos, true);
5132 assert(min_split_pos <= optimal_split_pos && optimal_split_pos <= max_split_pos, "out of range");
5133 assert(optimal_split_pos <= it->to(), "cannot split after end of interval");
5134 assert(optimal_split_pos > it->from(), "cannot split at start of interval");
5136 if (optimal_split_pos == it->to() && it->next_usage(mustHaveRegister, min_split_pos) == max_jint) {
5137 // the split position would be just before the end of the interval
5138 // -> no split at all necessary
5139 TRACE_LINEAR_SCAN(4, tty->print_cr(" no split necessary because optimal split position is at end of interval"));
5140 return;
5141 }
5143 // must calculate this before the actual split is performed and before split position is moved to odd op_id
5144 bool move_necessary = !allocator()->is_block_begin(optimal_split_pos) && !it->has_hole_between(optimal_split_pos - 1, optimal_split_pos);
5146 if (!allocator()->is_block_begin(optimal_split_pos)) {
5147 // move position before actual instruction (odd op_id)
5148 optimal_split_pos = (optimal_split_pos - 1) | 1;
5149 }
5151 TRACE_LINEAR_SCAN(4, tty->print_cr(" splitting at position %d", optimal_split_pos));
5152 assert(allocator()->is_block_begin(optimal_split_pos) || (optimal_split_pos % 2 == 1), "split pos must be odd when not on block boundary");
5153 assert(!allocator()->is_block_begin(optimal_split_pos) || (optimal_split_pos % 2 == 0), "split pos must be even on block boundary");
5155 Interval* split_part = it->split(optimal_split_pos);
5157 allocator()->append_interval(split_part);
5158 allocator()->copy_register_flags(it, split_part);
5159 split_part->set_insert_move_when_activated(move_necessary);
5160 append_to_unhandled(unhandled_first_addr(anyKind), split_part);
5162 TRACE_LINEAR_SCAN(2, tty->print_cr(" split interval in two parts (insert_move_when_activated: %d)", move_necessary));
5163 TRACE_LINEAR_SCAN(2, tty->print (" "); it->print());
5164 TRACE_LINEAR_SCAN(2, tty->print (" "); split_part->print());
5165 }
5167 /*
5168 split an interval at the optimal position between min_split_pos and
5169 max_split_pos in two parts:
5170 1) the left part has already a location assigned
5171 2) the right part is always on the stack and therefore ignored in further processing
5172 */
5173 void LinearScanWalker::split_for_spilling(Interval* it) {
5174 // calculate allowed range of splitting position
5175 int max_split_pos = current_position();
5176 int min_split_pos = MAX2(it->previous_usage(shouldHaveRegister, max_split_pos) + 1, it->from());
5178 TRACE_LINEAR_SCAN(2, tty->print ("----- splitting and spilling interval: "); it->print());
5179 TRACE_LINEAR_SCAN(2, tty->print_cr(" between %d and %d", min_split_pos, max_split_pos));
5181 assert(it->state() == activeState, "why spill interval that is not active?");
5182 assert(it->from() <= min_split_pos, "cannot split before start of interval");
5183 assert(min_split_pos <= max_split_pos, "invalid order");
5184 assert(max_split_pos < it->to(), "cannot split at end end of interval");
5185 assert(current_position() < it->to(), "interval must not end before current position");
5187 if (min_split_pos == it->from()) {
5188 // the whole interval is never used, so spill it entirely to memory
5189 TRACE_LINEAR_SCAN(2, tty->print_cr(" spilling entire interval because split pos is at beginning of interval"));
5190 assert(it->first_usage(shouldHaveRegister) > current_position(), "interval must not have use position before current_position");
5192 allocator()->assign_spill_slot(it);
5193 allocator()->change_spill_state(it, min_split_pos);
5195 // Also kick parent intervals out of register to memory when they have no use
5196 // position. This avoids short interval in register surrounded by intervals in
5197 // memory -> avoid useless moves from memory to register and back
5198 Interval* parent = it;
5199 while (parent != NULL && parent->is_split_child()) {
5200 parent = parent->split_child_before_op_id(parent->from());
5202 if (parent->assigned_reg() < LinearScan::nof_regs) {
5203 if (parent->first_usage(shouldHaveRegister) == max_jint) {
5204 // parent is never used, so kick it out of its assigned register
5205 TRACE_LINEAR_SCAN(4, tty->print_cr(" kicking out interval %d out of its register because it is never used", parent->reg_num()));
5206 allocator()->assign_spill_slot(parent);
5207 } else {
5208 // do not go further back because the register is actually used by the interval
5209 parent = NULL;
5210 }
5211 }
5212 }
5214 } else {
5215 // search optimal split pos, split interval and spill only the right hand part
5216 int optimal_split_pos = find_optimal_split_pos(it, min_split_pos, max_split_pos, false);
5218 assert(min_split_pos <= optimal_split_pos && optimal_split_pos <= max_split_pos, "out of range");
5219 assert(optimal_split_pos < it->to(), "cannot split at end of interval");
5220 assert(optimal_split_pos >= it->from(), "cannot split before start of interval");
5222 if (!allocator()->is_block_begin(optimal_split_pos)) {
5223 // move position before actual instruction (odd op_id)
5224 optimal_split_pos = (optimal_split_pos - 1) | 1;
5225 }
5227 TRACE_LINEAR_SCAN(4, tty->print_cr(" splitting at position %d", optimal_split_pos));
5228 assert(allocator()->is_block_begin(optimal_split_pos) || (optimal_split_pos % 2 == 1), "split pos must be odd when not on block boundary");
5229 assert(!allocator()->is_block_begin(optimal_split_pos) || (optimal_split_pos % 2 == 0), "split pos must be even on block boundary");
5231 Interval* spilled_part = it->split(optimal_split_pos);
5232 allocator()->append_interval(spilled_part);
5233 allocator()->assign_spill_slot(spilled_part);
5234 allocator()->change_spill_state(spilled_part, optimal_split_pos);
5236 if (!allocator()->is_block_begin(optimal_split_pos)) {
5237 TRACE_LINEAR_SCAN(4, tty->print_cr(" inserting move from interval %d to %d", it->reg_num(), spilled_part->reg_num()));
5238 insert_move(optimal_split_pos, it, spilled_part);
5239 }
5241 // the current_split_child is needed later when moves are inserted for reloading
5242 assert(spilled_part->current_split_child() == it, "overwriting wrong current_split_child");
5243 spilled_part->make_current_split_child();
5245 TRACE_LINEAR_SCAN(2, tty->print_cr(" split interval in two parts"));
5246 TRACE_LINEAR_SCAN(2, tty->print (" "); it->print());
5247 TRACE_LINEAR_SCAN(2, tty->print (" "); spilled_part->print());
5248 }
5249 }
5252 void LinearScanWalker::split_stack_interval(Interval* it) {
5253 int min_split_pos = current_position() + 1;
5254 int max_split_pos = MIN2(it->first_usage(shouldHaveRegister), it->to());
5256 split_before_usage(it, min_split_pos, max_split_pos);
5257 }
5259 void LinearScanWalker::split_when_partial_register_available(Interval* it, int register_available_until) {
5260 int min_split_pos = MAX2(it->previous_usage(shouldHaveRegister, register_available_until), it->from() + 1);
5261 int max_split_pos = register_available_until;
5263 split_before_usage(it, min_split_pos, max_split_pos);
5264 }
5266 void LinearScanWalker::split_and_spill_interval(Interval* it) {
5267 assert(it->state() == activeState || it->state() == inactiveState, "other states not allowed");
5269 int current_pos = current_position();
5270 if (it->state() == inactiveState) {
5271 // the interval is currently inactive, so no spill slot is needed for now.
5272 // when the split part is activated, the interval has a new chance to get a register,
5273 // so in the best case no stack slot is necessary
5274 assert(it->has_hole_between(current_pos - 1, current_pos + 1), "interval can not be inactive otherwise");
5275 split_before_usage(it, current_pos + 1, current_pos + 1);
5277 } else {
5278 // search the position where the interval must have a register and split
5279 // at the optimal position before.
5280 // The new created part is added to the unhandled list and will get a register
5281 // when it is activated
5282 int min_split_pos = current_pos + 1;
5283 int max_split_pos = MIN2(it->next_usage(mustHaveRegister, min_split_pos), it->to());
5285 split_before_usage(it, min_split_pos, max_split_pos);
5287 assert(it->next_usage(mustHaveRegister, current_pos) == max_jint, "the remaining part is spilled to stack and therefore has no register");
5288 split_for_spilling(it);
5289 }
5290 }
5293 int LinearScanWalker::find_free_reg(int reg_needed_until, int interval_to, int hint_reg, int ignore_reg, bool* need_split) {
5294 int min_full_reg = any_reg;
5295 int max_partial_reg = any_reg;
5297 for (int i = _first_reg; i <= _last_reg; i++) {
5298 if (i == ignore_reg) {
5299 // this register must be ignored
5301 } else if (_use_pos[i] >= interval_to) {
5302 // this register is free for the full interval
5303 if (min_full_reg == any_reg || i == hint_reg || (_use_pos[i] < _use_pos[min_full_reg] && min_full_reg != hint_reg)) {
5304 min_full_reg = i;
5305 }
5306 } else if (_use_pos[i] > reg_needed_until) {
5307 // this register is at least free until reg_needed_until
5308 if (max_partial_reg == any_reg || i == hint_reg || (_use_pos[i] > _use_pos[max_partial_reg] && max_partial_reg != hint_reg)) {
5309 max_partial_reg = i;
5310 }
5311 }
5312 }
5314 if (min_full_reg != any_reg) {
5315 return min_full_reg;
5316 } else if (max_partial_reg != any_reg) {
5317 *need_split = true;
5318 return max_partial_reg;
5319 } else {
5320 return any_reg;
5321 }
5322 }
5324 int LinearScanWalker::find_free_double_reg(int reg_needed_until, int interval_to, int hint_reg, bool* need_split) {
5325 assert((_last_reg - _first_reg + 1) % 2 == 0, "adjust algorithm");
5327 int min_full_reg = any_reg;
5328 int max_partial_reg = any_reg;
5330 for (int i = _first_reg; i < _last_reg; i+=2) {
5331 if (_use_pos[i] >= interval_to && _use_pos[i + 1] >= interval_to) {
5332 // this register is free for the full interval
5333 if (min_full_reg == any_reg || i == hint_reg || (_use_pos[i] < _use_pos[min_full_reg] && min_full_reg != hint_reg)) {
5334 min_full_reg = i;
5335 }
5336 } else if (_use_pos[i] > reg_needed_until && _use_pos[i + 1] > reg_needed_until) {
5337 // this register is at least free until reg_needed_until
5338 if (max_partial_reg == any_reg || i == hint_reg || (_use_pos[i] > _use_pos[max_partial_reg] && max_partial_reg != hint_reg)) {
5339 max_partial_reg = i;
5340 }
5341 }
5342 }
5344 if (min_full_reg != any_reg) {
5345 return min_full_reg;
5346 } else if (max_partial_reg != any_reg) {
5347 *need_split = true;
5348 return max_partial_reg;
5349 } else {
5350 return any_reg;
5351 }
5352 }
5355 bool LinearScanWalker::alloc_free_reg(Interval* cur) {
5356 TRACE_LINEAR_SCAN(2, tty->print("trying to find free register for "); cur->print());
5358 init_use_lists(true);
5359 free_exclude_active_fixed();
5360 free_exclude_active_any();
5361 free_collect_inactive_fixed(cur);
5362 free_collect_inactive_any(cur);
5363 // free_collect_unhandled(fixedKind, cur);
5364 assert(unhandled_first(fixedKind) == Interval::end(), "must not have unhandled fixed intervals because all fixed intervals have a use at position 0");
5366 // _use_pos contains the start of the next interval that has this register assigned
5367 // (either as a fixed register or a normal allocated register in the past)
5368 // only intervals overlapping with cur are processed, non-overlapping invervals can be ignored safely
5369 TRACE_LINEAR_SCAN(4, tty->print_cr(" state of registers:"));
5370 TRACE_LINEAR_SCAN(4, for (int i = _first_reg; i <= _last_reg; i++) tty->print_cr(" reg %d: use_pos: %d", i, _use_pos[i]));
5372 int hint_reg, hint_regHi;
5373 Interval* register_hint = cur->register_hint();
5374 if (register_hint != NULL) {
5375 hint_reg = register_hint->assigned_reg();
5376 hint_regHi = register_hint->assigned_regHi();
5378 if (allocator()->is_precolored_cpu_interval(register_hint)) {
5379 assert(hint_reg != any_reg && hint_regHi == any_reg, "must be for fixed intervals");
5380 hint_regHi = hint_reg + 1; // connect e.g. eax-edx
5381 }
5382 TRACE_LINEAR_SCAN(4, tty->print(" hint registers %d, %d from interval ", hint_reg, hint_regHi); register_hint->print());
5384 } else {
5385 hint_reg = any_reg;
5386 hint_regHi = any_reg;
5387 }
5388 assert(hint_reg == any_reg || hint_reg != hint_regHi, "hint reg and regHi equal");
5389 assert(cur->assigned_reg() == any_reg && cur->assigned_regHi() == any_reg, "register already assigned to interval");
5391 // the register must be free at least until this position
5392 int reg_needed_until = cur->from() + 1;
5393 int interval_to = cur->to();
5395 bool need_split = false;
5396 int split_pos = -1;
5397 int reg = any_reg;
5398 int regHi = any_reg;
5400 if (_adjacent_regs) {
5401 reg = find_free_double_reg(reg_needed_until, interval_to, hint_reg, &need_split);
5402 regHi = reg + 1;
5403 if (reg == any_reg) {
5404 return false;
5405 }
5406 split_pos = MIN2(_use_pos[reg], _use_pos[regHi]);
5408 } else {
5409 reg = find_free_reg(reg_needed_until, interval_to, hint_reg, any_reg, &need_split);
5410 if (reg == any_reg) {
5411 return false;
5412 }
5413 split_pos = _use_pos[reg];
5415 if (_num_phys_regs == 2) {
5416 regHi = find_free_reg(reg_needed_until, interval_to, hint_regHi, reg, &need_split);
5418 if (_use_pos[reg] < interval_to && regHi == any_reg) {
5419 // do not split interval if only one register can be assigned until the split pos
5420 // (when one register is found for the whole interval, split&spill is only
5421 // performed for the hi register)
5422 return false;
5424 } else if (regHi != any_reg) {
5425 split_pos = MIN2(split_pos, _use_pos[regHi]);
5427 // sort register numbers to prevent e.g. a move from eax,ebx to ebx,eax
5428 if (reg > regHi) {
5429 int temp = reg;
5430 reg = regHi;
5431 regHi = temp;
5432 }
5433 }
5434 }
5435 }
5437 cur->assign_reg(reg, regHi);
5438 TRACE_LINEAR_SCAN(2, tty->print_cr("selected register %d, %d", reg, regHi));
5440 assert(split_pos > 0, "invalid split_pos");
5441 if (need_split) {
5442 // register not available for full interval, so split it
5443 split_when_partial_register_available(cur, split_pos);
5444 }
5446 // only return true if interval is completely assigned
5447 return _num_phys_regs == 1 || regHi != any_reg;
5448 }
5451 int LinearScanWalker::find_locked_reg(int reg_needed_until, int interval_to, int hint_reg, int ignore_reg, bool* need_split) {
5452 int max_reg = any_reg;
5454 for (int i = _first_reg; i <= _last_reg; i++) {
5455 if (i == ignore_reg) {
5456 // this register must be ignored
5458 } else if (_use_pos[i] > reg_needed_until) {
5459 if (max_reg == any_reg || i == hint_reg || (_use_pos[i] > _use_pos[max_reg] && max_reg != hint_reg)) {
5460 max_reg = i;
5461 }
5462 }
5463 }
5465 if (max_reg != any_reg && _block_pos[max_reg] <= interval_to) {
5466 *need_split = true;
5467 }
5469 return max_reg;
5470 }
5472 int LinearScanWalker::find_locked_double_reg(int reg_needed_until, int interval_to, int hint_reg, bool* need_split) {
5473 assert((_last_reg - _first_reg + 1) % 2 == 0, "adjust algorithm");
5475 int max_reg = any_reg;
5477 for (int i = _first_reg; i < _last_reg; i+=2) {
5478 if (_use_pos[i] > reg_needed_until && _use_pos[i + 1] > reg_needed_until) {
5479 if (max_reg == any_reg || _use_pos[i] > _use_pos[max_reg]) {
5480 max_reg = i;
5481 }
5482 }
5483 }
5485 if (_block_pos[max_reg] <= interval_to || _block_pos[max_reg + 1] <= interval_to) {
5486 *need_split = true;
5487 }
5489 return max_reg;
5490 }
5492 void LinearScanWalker::split_and_spill_intersecting_intervals(int reg, int regHi) {
5493 assert(reg != any_reg, "no register assigned");
5495 for (int i = 0; i < _spill_intervals[reg]->length(); i++) {
5496 Interval* it = _spill_intervals[reg]->at(i);
5497 remove_from_list(it);
5498 split_and_spill_interval(it);
5499 }
5501 if (regHi != any_reg) {
5502 IntervalList* processed = _spill_intervals[reg];
5503 for (int i = 0; i < _spill_intervals[regHi]->length(); i++) {
5504 Interval* it = _spill_intervals[regHi]->at(i);
5505 if (processed->index_of(it) == -1) {
5506 remove_from_list(it);
5507 split_and_spill_interval(it);
5508 }
5509 }
5510 }
5511 }
5514 // Split an Interval and spill it to memory so that cur can be placed in a register
5515 void LinearScanWalker::alloc_locked_reg(Interval* cur) {
5516 TRACE_LINEAR_SCAN(2, tty->print("need to split and spill to get register for "); cur->print());
5518 // collect current usage of registers
5519 init_use_lists(false);
5520 spill_exclude_active_fixed();
5521 // spill_block_unhandled_fixed(cur);
5522 assert(unhandled_first(fixedKind) == Interval::end(), "must not have unhandled fixed intervals because all fixed intervals have a use at position 0");
5523 spill_block_inactive_fixed(cur);
5524 spill_collect_active_any();
5525 spill_collect_inactive_any(cur);
5527 #ifndef PRODUCT
5528 if (TraceLinearScanLevel >= 4) {
5529 tty->print_cr(" state of registers:");
5530 for (int i = _first_reg; i <= _last_reg; i++) {
5531 tty->print(" reg %d: use_pos: %d, block_pos: %d, intervals: ", i, _use_pos[i], _block_pos[i]);
5532 for (int j = 0; j < _spill_intervals[i]->length(); j++) {
5533 tty->print("%d ", _spill_intervals[i]->at(j)->reg_num());
5534 }
5535 tty->cr();
5536 }
5537 }
5538 #endif
5540 // the register must be free at least until this position
5541 int reg_needed_until = MIN2(cur->first_usage(mustHaveRegister), cur->from() + 1);
5542 int interval_to = cur->to();
5543 assert (reg_needed_until > 0 && reg_needed_until < max_jint, "interval has no use");
5545 int split_pos = 0;
5546 int use_pos = 0;
5547 bool need_split = false;
5548 int reg, regHi;
5550 if (_adjacent_regs) {
5551 reg = find_locked_double_reg(reg_needed_until, interval_to, any_reg, &need_split);
5552 regHi = reg + 1;
5554 if (reg != any_reg) {
5555 use_pos = MIN2(_use_pos[reg], _use_pos[regHi]);
5556 split_pos = MIN2(_block_pos[reg], _block_pos[regHi]);
5557 }
5558 } else {
5559 reg = find_locked_reg(reg_needed_until, interval_to, any_reg, cur->assigned_reg(), &need_split);
5560 regHi = any_reg;
5562 if (reg != any_reg) {
5563 use_pos = _use_pos[reg];
5564 split_pos = _block_pos[reg];
5566 if (_num_phys_regs == 2) {
5567 if (cur->assigned_reg() != any_reg) {
5568 regHi = reg;
5569 reg = cur->assigned_reg();
5570 } else {
5571 regHi = find_locked_reg(reg_needed_until, interval_to, any_reg, reg, &need_split);
5572 if (regHi != any_reg) {
5573 use_pos = MIN2(use_pos, _use_pos[regHi]);
5574 split_pos = MIN2(split_pos, _block_pos[regHi]);
5575 }
5576 }
5578 if (regHi != any_reg && reg > regHi) {
5579 // sort register numbers to prevent e.g. a move from eax,ebx to ebx,eax
5580 int temp = reg;
5581 reg = regHi;
5582 regHi = temp;
5583 }
5584 }
5585 }
5586 }
5588 if (reg == any_reg || (_num_phys_regs == 2 && regHi == any_reg) || use_pos <= cur->first_usage(mustHaveRegister)) {
5589 // the first use of cur is later than the spilling position -> spill cur
5590 TRACE_LINEAR_SCAN(4, tty->print_cr("able to spill current interval. first_usage(register): %d, use_pos: %d", cur->first_usage(mustHaveRegister), use_pos));
5592 if (cur->first_usage(mustHaveRegister) <= cur->from() + 1) {
5593 assert(false, "cannot spill interval that is used in first instruction (possible reason: no register found)");
5594 // assign a reasonable register and do a bailout in product mode to avoid errors
5595 allocator()->assign_spill_slot(cur);
5596 BAILOUT("LinearScan: no register found");
5597 }
5599 split_and_spill_interval(cur);
5600 } else {
5601 TRACE_LINEAR_SCAN(4, tty->print_cr("decided to use register %d, %d", reg, regHi));
5602 assert(reg != any_reg && (_num_phys_regs == 1 || regHi != any_reg), "no register found");
5603 assert(split_pos > 0, "invalid split_pos");
5604 assert(need_split == false || split_pos > cur->from(), "splitting interval at from");
5606 cur->assign_reg(reg, regHi);
5607 if (need_split) {
5608 // register not available for full interval, so split it
5609 split_when_partial_register_available(cur, split_pos);
5610 }
5612 // perform splitting and spilling for all affected intervalls
5613 split_and_spill_intersecting_intervals(reg, regHi);
5614 }
5615 }
5617 bool LinearScanWalker::no_allocation_possible(Interval* cur) {
5618 #ifdef X86
5619 // fast calculation of intervals that can never get a register because the
5620 // the next instruction is a call that blocks all registers
5621 // Note: this does not work if callee-saved registers are available (e.g. on Sparc)
5623 // check if this interval is the result of a split operation
5624 // (an interval got a register until this position)
5625 int pos = cur->from();
5626 if ((pos & 1) == 1) {
5627 // the current instruction is a call that blocks all registers
5628 if (pos < allocator()->max_lir_op_id() && allocator()->has_call(pos + 1)) {
5629 TRACE_LINEAR_SCAN(4, tty->print_cr(" free register cannot be available because all registers blocked by following call"));
5631 // safety check that there is really no register available
5632 assert(alloc_free_reg(cur) == false, "found a register for this interval");
5633 return true;
5634 }
5636 }
5637 #endif
5638 return false;
5639 }
5641 void LinearScanWalker::init_vars_for_alloc(Interval* cur) {
5642 BasicType type = cur->type();
5643 _num_phys_regs = LinearScan::num_physical_regs(type);
5644 _adjacent_regs = LinearScan::requires_adjacent_regs(type);
5646 if (pd_init_regs_for_alloc(cur)) {
5647 // the appropriate register range was selected.
5648 } else if (type == T_FLOAT || type == T_DOUBLE) {
5649 _first_reg = pd_first_fpu_reg;
5650 _last_reg = pd_last_fpu_reg;
5651 } else {
5652 _first_reg = pd_first_cpu_reg;
5653 _last_reg = FrameMap::last_cpu_reg();
5654 }
5656 assert(0 <= _first_reg && _first_reg < LinearScan::nof_regs, "out of range");
5657 assert(0 <= _last_reg && _last_reg < LinearScan::nof_regs, "out of range");
5658 }
5661 bool LinearScanWalker::is_move(LIR_Op* op, Interval* from, Interval* to) {
5662 if (op->code() != lir_move) {
5663 return false;
5664 }
5665 assert(op->as_Op1() != NULL, "move must be LIR_Op1");
5667 LIR_Opr in = ((LIR_Op1*)op)->in_opr();
5668 LIR_Opr res = ((LIR_Op1*)op)->result_opr();
5669 return in->is_virtual() && res->is_virtual() && in->vreg_number() == from->reg_num() && res->vreg_number() == to->reg_num();
5670 }
5672 // optimization (especially for phi functions of nested loops):
5673 // assign same spill slot to non-intersecting intervals
5674 void LinearScanWalker::combine_spilled_intervals(Interval* cur) {
5675 if (cur->is_split_child()) {
5676 // optimization is only suitable for split parents
5677 return;
5678 }
5680 Interval* register_hint = cur->register_hint(false);
5681 if (register_hint == NULL) {
5682 // cur is not the target of a move, otherwise register_hint would be set
5683 return;
5684 }
5685 assert(register_hint->is_split_parent(), "register hint must be split parent");
5687 if (cur->spill_state() != noOptimization || register_hint->spill_state() != noOptimization) {
5688 // combining the stack slots for intervals where spill move optimization is applied
5689 // is not benefitial and would cause problems
5690 return;
5691 }
5693 int begin_pos = cur->from();
5694 int end_pos = cur->to();
5695 if (end_pos > allocator()->max_lir_op_id() || (begin_pos & 1) != 0 || (end_pos & 1) != 0) {
5696 // safety check that lir_op_with_id is allowed
5697 return;
5698 }
5700 if (!is_move(allocator()->lir_op_with_id(begin_pos), register_hint, cur) || !is_move(allocator()->lir_op_with_id(end_pos), cur, register_hint)) {
5701 // cur and register_hint are not connected with two moves
5702 return;
5703 }
5705 Interval* begin_hint = register_hint->split_child_at_op_id(begin_pos, LIR_OpVisitState::inputMode);
5706 Interval* end_hint = register_hint->split_child_at_op_id(end_pos, LIR_OpVisitState::outputMode);
5707 if (begin_hint == end_hint || begin_hint->to() != begin_pos || end_hint->from() != end_pos) {
5708 // register_hint must be split, otherwise the re-writing of use positions does not work
5709 return;
5710 }
5712 assert(begin_hint->assigned_reg() != any_reg, "must have register assigned");
5713 assert(end_hint->assigned_reg() == any_reg, "must not have register assigned");
5714 assert(cur->first_usage(mustHaveRegister) == begin_pos, "must have use position at begin of interval because of move");
5715 assert(end_hint->first_usage(mustHaveRegister) == end_pos, "must have use position at begin of interval because of move");
5717 if (begin_hint->assigned_reg() < LinearScan::nof_regs) {
5718 // register_hint is not spilled at begin_pos, so it would not be benefitial to immediately spill cur
5719 return;
5720 }
5721 assert(register_hint->canonical_spill_slot() != -1, "must be set when part of interval was spilled");
5723 // modify intervals such that cur gets the same stack slot as register_hint
5724 // delete use positions to prevent the intervals to get a register at beginning
5725 cur->set_canonical_spill_slot(register_hint->canonical_spill_slot());
5726 cur->remove_first_use_pos();
5727 end_hint->remove_first_use_pos();
5728 }
5731 // allocate a physical register or memory location to an interval
5732 bool LinearScanWalker::activate_current() {
5733 Interval* cur = current();
5734 bool result = true;
5736 TRACE_LINEAR_SCAN(2, tty->print ("+++++ activating interval "); cur->print());
5737 TRACE_LINEAR_SCAN(4, tty->print_cr(" split_parent: %d, insert_move_when_activated: %d", cur->split_parent()->reg_num(), cur->insert_move_when_activated()));
5739 if (cur->assigned_reg() >= LinearScan::nof_regs) {
5740 // activating an interval that has a stack slot assigned -> split it at first use position
5741 // used for method parameters
5742 TRACE_LINEAR_SCAN(4, tty->print_cr(" interval has spill slot assigned (method parameter) -> split it before first use"));
5744 split_stack_interval(cur);
5745 result = false;
5747 } else if (allocator()->gen()->is_vreg_flag_set(cur->reg_num(), LIRGenerator::must_start_in_memory)) {
5748 // activating an interval that must start in a stack slot, but may get a register later
5749 // used for lir_roundfp: rounding is done by store to stack and reload later
5750 TRACE_LINEAR_SCAN(4, tty->print_cr(" interval must start in stack slot -> split it before first use"));
5751 assert(cur->assigned_reg() == any_reg && cur->assigned_regHi() == any_reg, "register already assigned");
5753 allocator()->assign_spill_slot(cur);
5754 split_stack_interval(cur);
5755 result = false;
5757 } else if (cur->assigned_reg() == any_reg) {
5758 // interval has not assigned register -> normal allocation
5759 // (this is the normal case for most intervals)
5760 TRACE_LINEAR_SCAN(4, tty->print_cr(" normal allocation of register"));
5762 // assign same spill slot to non-intersecting intervals
5763 combine_spilled_intervals(cur);
5765 init_vars_for_alloc(cur);
5766 if (no_allocation_possible(cur) || !alloc_free_reg(cur)) {
5767 // no empty register available.
5768 // split and spill another interval so that this interval gets a register
5769 alloc_locked_reg(cur);
5770 }
5772 // spilled intervals need not be move to active-list
5773 if (cur->assigned_reg() >= LinearScan::nof_regs) {
5774 result = false;
5775 }
5776 }
5778 // load spilled values that become active from stack slot to register
5779 if (cur->insert_move_when_activated()) {
5780 assert(cur->is_split_child(), "must be");
5781 assert(cur->current_split_child() != NULL, "must be");
5782 assert(cur->current_split_child()->reg_num() != cur->reg_num(), "cannot insert move between same interval");
5783 TRACE_LINEAR_SCAN(4, tty->print_cr("Inserting move from interval %d to %d because insert_move_when_activated is set", cur->current_split_child()->reg_num(), cur->reg_num()));
5785 insert_move(cur->from(), cur->current_split_child(), cur);
5786 }
5787 cur->make_current_split_child();
5789 return result; // true = interval is moved to active list
5790 }
5793 // Implementation of EdgeMoveOptimizer
5795 EdgeMoveOptimizer::EdgeMoveOptimizer() :
5796 _edge_instructions(4),
5797 _edge_instructions_idx(4)
5798 {
5799 }
5801 void EdgeMoveOptimizer::optimize(BlockList* code) {
5802 EdgeMoveOptimizer optimizer = EdgeMoveOptimizer();
5804 // ignore the first block in the list (index 0 is not processed)
5805 for (int i = code->length() - 1; i >= 1; i--) {
5806 BlockBegin* block = code->at(i);
5808 if (block->number_of_preds() > 1 && !block->is_set(BlockBegin::exception_entry_flag)) {
5809 optimizer.optimize_moves_at_block_end(block);
5810 }
5811 if (block->number_of_sux() == 2) {
5812 optimizer.optimize_moves_at_block_begin(block);
5813 }
5814 }
5815 }
5818 // clear all internal data structures
5819 void EdgeMoveOptimizer::init_instructions() {
5820 _edge_instructions.clear();
5821 _edge_instructions_idx.clear();
5822 }
5824 // append a lir-instruction-list and the index of the current operation in to the list
5825 void EdgeMoveOptimizer::append_instructions(LIR_OpList* instructions, int instructions_idx) {
5826 _edge_instructions.append(instructions);
5827 _edge_instructions_idx.append(instructions_idx);
5828 }
5830 // return the current operation of the given edge (predecessor or successor)
5831 LIR_Op* EdgeMoveOptimizer::instruction_at(int edge) {
5832 LIR_OpList* instructions = _edge_instructions.at(edge);
5833 int idx = _edge_instructions_idx.at(edge);
5835 if (idx < instructions->length()) {
5836 return instructions->at(idx);
5837 } else {
5838 return NULL;
5839 }
5840 }
5842 // removes the current operation of the given edge (predecessor or successor)
5843 void EdgeMoveOptimizer::remove_cur_instruction(int edge, bool decrement_index) {
5844 LIR_OpList* instructions = _edge_instructions.at(edge);
5845 int idx = _edge_instructions_idx.at(edge);
5846 instructions->remove_at(idx);
5848 if (decrement_index) {
5849 _edge_instructions_idx.at_put(edge, idx - 1);
5850 }
5851 }
5854 bool EdgeMoveOptimizer::operations_different(LIR_Op* op1, LIR_Op* op2) {
5855 if (op1 == NULL || op2 == NULL) {
5856 // at least one block is already empty -> no optimization possible
5857 return true;
5858 }
5860 if (op1->code() == lir_move && op2->code() == lir_move) {
5861 assert(op1->as_Op1() != NULL, "move must be LIR_Op1");
5862 assert(op2->as_Op1() != NULL, "move must be LIR_Op1");
5863 LIR_Op1* move1 = (LIR_Op1*)op1;
5864 LIR_Op1* move2 = (LIR_Op1*)op2;
5865 if (move1->info() == move2->info() && move1->in_opr() == move2->in_opr() && move1->result_opr() == move2->result_opr()) {
5866 // these moves are exactly equal and can be optimized
5867 return false;
5868 }
5870 } else if (op1->code() == lir_fxch && op2->code() == lir_fxch) {
5871 assert(op1->as_Op1() != NULL, "fxch must be LIR_Op1");
5872 assert(op2->as_Op1() != NULL, "fxch must be LIR_Op1");
5873 LIR_Op1* fxch1 = (LIR_Op1*)op1;
5874 LIR_Op1* fxch2 = (LIR_Op1*)op2;
5875 if (fxch1->in_opr()->as_jint() == fxch2->in_opr()->as_jint()) {
5876 // equal FPU stack operations can be optimized
5877 return false;
5878 }
5880 } else if (op1->code() == lir_fpop_raw && op2->code() == lir_fpop_raw) {
5881 // equal FPU stack operations can be optimized
5882 return false;
5883 }
5885 // no optimization possible
5886 return true;
5887 }
5889 void EdgeMoveOptimizer::optimize_moves_at_block_end(BlockBegin* block) {
5890 TRACE_LINEAR_SCAN(4, tty->print_cr("optimizing moves at end of block B%d", block->block_id()));
5892 if (block->is_predecessor(block)) {
5893 // currently we can't handle this correctly.
5894 return;
5895 }
5897 init_instructions();
5898 int num_preds = block->number_of_preds();
5899 assert(num_preds > 1, "do not call otherwise");
5900 assert(!block->is_set(BlockBegin::exception_entry_flag), "exception handlers not allowed");
5902 // setup a list with the lir-instructions of all predecessors
5903 int i;
5904 for (i = 0; i < num_preds; i++) {
5905 BlockBegin* pred = block->pred_at(i);
5906 LIR_OpList* pred_instructions = pred->lir()->instructions_list();
5908 if (pred->number_of_sux() != 1) {
5909 // this can happen with switch-statements where multiple edges are between
5910 // the same blocks.
5911 return;
5912 }
5914 assert(pred->number_of_sux() == 1, "can handle only one successor");
5915 assert(pred->sux_at(0) == block, "invalid control flow");
5916 assert(pred_instructions->last()->code() == lir_branch, "block with successor must end with branch");
5917 assert(pred_instructions->last()->as_OpBranch() != NULL, "branch must be LIR_OpBranch");
5918 assert(pred_instructions->last()->as_OpBranch()->cond() == lir_cond_always, "block must end with unconditional branch");
5920 if (pred_instructions->last()->info() != NULL) {
5921 // can not optimize instructions when debug info is needed
5922 return;
5923 }
5925 // ignore the unconditional branch at the end of the block
5926 append_instructions(pred_instructions, pred_instructions->length() - 2);
5927 }
5930 // process lir-instructions while all predecessors end with the same instruction
5931 while (true) {
5932 LIR_Op* op = instruction_at(0);
5933 for (i = 1; i < num_preds; i++) {
5934 if (operations_different(op, instruction_at(i))) {
5935 // these instructions are different and cannot be optimized ->
5936 // no further optimization possible
5937 return;
5938 }
5939 }
5941 TRACE_LINEAR_SCAN(4, tty->print("found instruction that is equal in all %d predecessors: ", num_preds); op->print());
5943 // insert the instruction at the beginning of the current block
5944 block->lir()->insert_before(1, op);
5946 // delete the instruction at the end of all predecessors
5947 for (i = 0; i < num_preds; i++) {
5948 remove_cur_instruction(i, true);
5949 }
5950 }
5951 }
5954 void EdgeMoveOptimizer::optimize_moves_at_block_begin(BlockBegin* block) {
5955 TRACE_LINEAR_SCAN(4, tty->print_cr("optimization moves at begin of block B%d", block->block_id()));
5957 init_instructions();
5958 int num_sux = block->number_of_sux();
5960 LIR_OpList* cur_instructions = block->lir()->instructions_list();
5962 assert(num_sux == 2, "method should not be called otherwise");
5963 assert(cur_instructions->last()->code() == lir_branch, "block with successor must end with branch");
5964 assert(cur_instructions->last()->as_OpBranch() != NULL, "branch must be LIR_OpBranch");
5965 assert(cur_instructions->last()->as_OpBranch()->cond() == lir_cond_always, "block must end with unconditional branch");
5967 if (cur_instructions->last()->info() != NULL) {
5968 // can no optimize instructions when debug info is needed
5969 return;
5970 }
5972 LIR_Op* branch = cur_instructions->at(cur_instructions->length() - 2);
5973 if (branch->info() != NULL || (branch->code() != lir_branch && branch->code() != lir_cond_float_branch)) {
5974 // not a valid case for optimization
5975 // currently, only blocks that end with two branches (conditional branch followed
5976 // by unconditional branch) are optimized
5977 return;
5978 }
5980 // now it is guaranteed that the block ends with two branch instructions.
5981 // the instructions are inserted at the end of the block before these two branches
5982 int insert_idx = cur_instructions->length() - 2;
5984 int i;
5985 #ifdef ASSERT
5986 for (i = insert_idx - 1; i >= 0; i--) {
5987 LIR_Op* op = cur_instructions->at(i);
5988 if ((op->code() == lir_branch || op->code() == lir_cond_float_branch) && ((LIR_OpBranch*)op)->block() != NULL) {
5989 assert(false, "block with two successors can have only two branch instructions");
5990 }
5991 }
5992 #endif
5994 // setup a list with the lir-instructions of all successors
5995 for (i = 0; i < num_sux; i++) {
5996 BlockBegin* sux = block->sux_at(i);
5997 LIR_OpList* sux_instructions = sux->lir()->instructions_list();
5999 assert(sux_instructions->at(0)->code() == lir_label, "block must start with label");
6001 if (sux->number_of_preds() != 1) {
6002 // this can happen with switch-statements where multiple edges are between
6003 // the same blocks.
6004 return;
6005 }
6006 assert(sux->pred_at(0) == block, "invalid control flow");
6007 assert(!sux->is_set(BlockBegin::exception_entry_flag), "exception handlers not allowed");
6009 // ignore the label at the beginning of the block
6010 append_instructions(sux_instructions, 1);
6011 }
6013 // process lir-instructions while all successors begin with the same instruction
6014 while (true) {
6015 LIR_Op* op = instruction_at(0);
6016 for (i = 1; i < num_sux; i++) {
6017 if (operations_different(op, instruction_at(i))) {
6018 // these instructions are different and cannot be optimized ->
6019 // no further optimization possible
6020 return;
6021 }
6022 }
6024 TRACE_LINEAR_SCAN(4, tty->print("----- found instruction that is equal in all %d successors: ", num_sux); op->print());
6026 // insert instruction at end of current block
6027 block->lir()->insert_before(insert_idx, op);
6028 insert_idx++;
6030 // delete the instructions at the beginning of all successors
6031 for (i = 0; i < num_sux; i++) {
6032 remove_cur_instruction(i, false);
6033 }
6034 }
6035 }
6038 // Implementation of ControlFlowOptimizer
6040 ControlFlowOptimizer::ControlFlowOptimizer() :
6041 _original_preds(4)
6042 {
6043 }
6045 void ControlFlowOptimizer::optimize(BlockList* code) {
6046 ControlFlowOptimizer optimizer = ControlFlowOptimizer();
6048 // push the OSR entry block to the end so that we're not jumping over it.
6049 BlockBegin* osr_entry = code->at(0)->end()->as_Base()->osr_entry();
6050 if (osr_entry) {
6051 int index = osr_entry->linear_scan_number();
6052 assert(code->at(index) == osr_entry, "wrong index");
6053 code->remove_at(index);
6054 code->append(osr_entry);
6055 }
6057 optimizer.reorder_short_loops(code);
6058 optimizer.delete_empty_blocks(code);
6059 optimizer.delete_unnecessary_jumps(code);
6060 optimizer.delete_jumps_to_return(code);
6061 }
6063 void ControlFlowOptimizer::reorder_short_loop(BlockList* code, BlockBegin* header_block, int header_idx) {
6064 int i = header_idx + 1;
6065 int max_end = MIN2(header_idx + ShortLoopSize, code->length());
6066 while (i < max_end && code->at(i)->loop_depth() >= header_block->loop_depth()) {
6067 i++;
6068 }
6070 if (i == code->length() || code->at(i)->loop_depth() < header_block->loop_depth()) {
6071 int end_idx = i - 1;
6072 BlockBegin* end_block = code->at(end_idx);
6074 if (end_block->number_of_sux() == 1 && end_block->sux_at(0) == header_block) {
6075 // short loop from header_idx to end_idx found -> reorder blocks such that
6076 // the header_block is the last block instead of the first block of the loop
6077 TRACE_LINEAR_SCAN(1, tty->print_cr("Reordering short loop: length %d, header B%d, end B%d",
6078 end_idx - header_idx + 1,
6079 header_block->block_id(), end_block->block_id()));
6081 for (int j = header_idx; j < end_idx; j++) {
6082 code->at_put(j, code->at(j + 1));
6083 }
6084 code->at_put(end_idx, header_block);
6086 // correct the flags so that any loop alignment occurs in the right place.
6087 assert(code->at(end_idx)->is_set(BlockBegin::backward_branch_target_flag), "must be backward branch target");
6088 code->at(end_idx)->clear(BlockBegin::backward_branch_target_flag);
6089 code->at(header_idx)->set(BlockBegin::backward_branch_target_flag);
6090 }
6091 }
6092 }
6094 void ControlFlowOptimizer::reorder_short_loops(BlockList* code) {
6095 for (int i = code->length() - 1; i >= 0; i--) {
6096 BlockBegin* block = code->at(i);
6098 if (block->is_set(BlockBegin::linear_scan_loop_header_flag)) {
6099 reorder_short_loop(code, block, i);
6100 }
6101 }
6103 DEBUG_ONLY(verify(code));
6104 }
6106 // only blocks with exactly one successor can be deleted. Such blocks
6107 // must always end with an unconditional branch to this successor
6108 bool ControlFlowOptimizer::can_delete_block(BlockBegin* block) {
6109 if (block->number_of_sux() != 1 || block->number_of_exception_handlers() != 0 || block->is_entry_block()) {
6110 return false;
6111 }
6113 LIR_OpList* instructions = block->lir()->instructions_list();
6115 assert(instructions->length() >= 2, "block must have label and branch");
6116 assert(instructions->at(0)->code() == lir_label, "first instruction must always be a label");
6117 assert(instructions->last()->as_OpBranch() != NULL, "last instrcution must always be a branch");
6118 assert(instructions->last()->as_OpBranch()->cond() == lir_cond_always, "branch must be unconditional");
6119 assert(instructions->last()->as_OpBranch()->block() == block->sux_at(0), "branch target must be the successor");
6121 // block must have exactly one successor
6123 if (instructions->length() == 2 && instructions->last()->info() == NULL) {
6124 return true;
6125 }
6126 return false;
6127 }
6129 // substitute branch targets in all branch-instructions of this blocks
6130 void ControlFlowOptimizer::substitute_branch_target(BlockBegin* block, BlockBegin* target_from, BlockBegin* target_to) {
6131 TRACE_LINEAR_SCAN(3, tty->print_cr("Deleting empty block: substituting from B%d to B%d inside B%d", target_from->block_id(), target_to->block_id(), block->block_id()));
6133 LIR_OpList* instructions = block->lir()->instructions_list();
6135 assert(instructions->at(0)->code() == lir_label, "first instruction must always be a label");
6136 for (int i = instructions->length() - 1; i >= 1; i--) {
6137 LIR_Op* op = instructions->at(i);
6139 if (op->code() == lir_branch || op->code() == lir_cond_float_branch) {
6140 assert(op->as_OpBranch() != NULL, "branch must be of type LIR_OpBranch");
6141 LIR_OpBranch* branch = (LIR_OpBranch*)op;
6143 if (branch->block() == target_from) {
6144 branch->change_block(target_to);
6145 }
6146 if (branch->ublock() == target_from) {
6147 branch->change_ublock(target_to);
6148 }
6149 }
6150 }
6151 }
6153 void ControlFlowOptimizer::delete_empty_blocks(BlockList* code) {
6154 int old_pos = 0;
6155 int new_pos = 0;
6156 int num_blocks = code->length();
6158 while (old_pos < num_blocks) {
6159 BlockBegin* block = code->at(old_pos);
6161 if (can_delete_block(block)) {
6162 BlockBegin* new_target = block->sux_at(0);
6164 // propagate backward branch target flag for correct code alignment
6165 if (block->is_set(BlockBegin::backward_branch_target_flag)) {
6166 new_target->set(BlockBegin::backward_branch_target_flag);
6167 }
6169 // collect a list with all predecessors that contains each predecessor only once
6170 // the predecessors of cur are changed during the substitution, so a copy of the
6171 // predecessor list is necessary
6172 int j;
6173 _original_preds.clear();
6174 for (j = block->number_of_preds() - 1; j >= 0; j--) {
6175 BlockBegin* pred = block->pred_at(j);
6176 if (_original_preds.index_of(pred) == -1) {
6177 _original_preds.append(pred);
6178 }
6179 }
6181 for (j = _original_preds.length() - 1; j >= 0; j--) {
6182 BlockBegin* pred = _original_preds.at(j);
6183 substitute_branch_target(pred, block, new_target);
6184 pred->substitute_sux(block, new_target);
6185 }
6186 } else {
6187 // adjust position of this block in the block list if blocks before
6188 // have been deleted
6189 if (new_pos != old_pos) {
6190 code->at_put(new_pos, code->at(old_pos));
6191 }
6192 new_pos++;
6193 }
6194 old_pos++;
6195 }
6196 code->truncate(new_pos);
6198 DEBUG_ONLY(verify(code));
6199 }
6201 void ControlFlowOptimizer::delete_unnecessary_jumps(BlockList* code) {
6202 // skip the last block because there a branch is always necessary
6203 for (int i = code->length() - 2; i >= 0; i--) {
6204 BlockBegin* block = code->at(i);
6205 LIR_OpList* instructions = block->lir()->instructions_list();
6207 LIR_Op* last_op = instructions->last();
6208 if (last_op->code() == lir_branch) {
6209 assert(last_op->as_OpBranch() != NULL, "branch must be of type LIR_OpBranch");
6210 LIR_OpBranch* last_branch = (LIR_OpBranch*)last_op;
6212 assert(last_branch->block() != NULL, "last branch must always have a block as target");
6213 assert(last_branch->label() == last_branch->block()->label(), "must be equal");
6215 if (last_branch->info() == NULL) {
6216 if (last_branch->block() == code->at(i + 1)) {
6218 TRACE_LINEAR_SCAN(3, tty->print_cr("Deleting unconditional branch at end of block B%d", block->block_id()));
6220 // delete last branch instruction
6221 instructions->truncate(instructions->length() - 1);
6223 } else {
6224 LIR_Op* prev_op = instructions->at(instructions->length() - 2);
6225 if (prev_op->code() == lir_branch || prev_op->code() == lir_cond_float_branch) {
6226 assert(prev_op->as_OpBranch() != NULL, "branch must be of type LIR_OpBranch");
6227 LIR_OpBranch* prev_branch = (LIR_OpBranch*)prev_op;
6229 if (prev_branch->stub() == NULL) {
6231 LIR_Op2* prev_cmp = NULL;
6233 for(int j = instructions->length() - 3; j >= 0 && prev_cmp == NULL; j--) {
6234 prev_op = instructions->at(j);
6235 if (prev_op->code() == lir_cmp) {
6236 assert(prev_op->as_Op2() != NULL, "branch must be of type LIR_Op2");
6237 prev_cmp = (LIR_Op2*)prev_op;
6238 assert(prev_branch->cond() == prev_cmp->condition(), "should be the same");
6239 }
6240 }
6241 assert(prev_cmp != NULL, "should have found comp instruction for branch");
6242 if (prev_branch->block() == code->at(i + 1) && prev_branch->info() == NULL) {
6244 TRACE_LINEAR_SCAN(3, tty->print_cr("Negating conditional branch and deleting unconditional branch at end of block B%d", block->block_id()));
6246 // eliminate a conditional branch to the immediate successor
6247 prev_branch->change_block(last_branch->block());
6248 prev_branch->negate_cond();
6249 prev_cmp->set_condition(prev_branch->cond());
6250 instructions->truncate(instructions->length() - 1);
6251 }
6252 }
6253 }
6254 }
6255 }
6256 }
6257 }
6259 DEBUG_ONLY(verify(code));
6260 }
6262 void ControlFlowOptimizer::delete_jumps_to_return(BlockList* code) {
6263 #ifdef ASSERT
6264 BitMap return_converted(BlockBegin::number_of_blocks());
6265 return_converted.clear();
6266 #endif
6268 for (int i = code->length() - 1; i >= 0; i--) {
6269 BlockBegin* block = code->at(i);
6270 LIR_OpList* cur_instructions = block->lir()->instructions_list();
6271 LIR_Op* cur_last_op = cur_instructions->last();
6273 assert(cur_instructions->at(0)->code() == lir_label, "first instruction must always be a label");
6274 if (cur_instructions->length() == 2 && cur_last_op->code() == lir_return) {
6275 // the block contains only a label and a return
6276 // if a predecessor ends with an unconditional jump to this block, then the jump
6277 // can be replaced with a return instruction
6278 //
6279 // Note: the original block with only a return statement cannot be deleted completely
6280 // because the predecessors might have other (conditional) jumps to this block
6281 // -> this may lead to unnecesary return instructions in the final code
6283 assert(cur_last_op->info() == NULL, "return instructions do not have debug information");
6284 assert(block->number_of_sux() == 0 ||
6285 (return_converted.at(block->block_id()) && block->number_of_sux() == 1),
6286 "blocks that end with return must not have successors");
6288 assert(cur_last_op->as_Op1() != NULL, "return must be LIR_Op1");
6289 LIR_Opr return_opr = ((LIR_Op1*)cur_last_op)->in_opr();
6291 for (int j = block->number_of_preds() - 1; j >= 0; j--) {
6292 BlockBegin* pred = block->pred_at(j);
6293 LIR_OpList* pred_instructions = pred->lir()->instructions_list();
6294 LIR_Op* pred_last_op = pred_instructions->last();
6296 if (pred_last_op->code() == lir_branch) {
6297 assert(pred_last_op->as_OpBranch() != NULL, "branch must be LIR_OpBranch");
6298 LIR_OpBranch* pred_last_branch = (LIR_OpBranch*)pred_last_op;
6300 if (pred_last_branch->block() == block && pred_last_branch->cond() == lir_cond_always && pred_last_branch->info() == NULL) {
6301 // replace the jump to a return with a direct return
6302 // Note: currently the edge between the blocks is not deleted
6303 pred_instructions->at_put(pred_instructions->length() - 1, new LIR_Op1(lir_return, return_opr));
6304 #ifdef ASSERT
6305 return_converted.set_bit(pred->block_id());
6306 #endif
6307 }
6308 }
6309 }
6310 }
6311 }
6312 }
6315 #ifdef ASSERT
6316 void ControlFlowOptimizer::verify(BlockList* code) {
6317 for (int i = 0; i < code->length(); i++) {
6318 BlockBegin* block = code->at(i);
6319 LIR_OpList* instructions = block->lir()->instructions_list();
6321 int j;
6322 for (j = 0; j < instructions->length(); j++) {
6323 LIR_OpBranch* op_branch = instructions->at(j)->as_OpBranch();
6325 if (op_branch != NULL) {
6326 assert(op_branch->block() == NULL || code->index_of(op_branch->block()) != -1, "branch target not valid");
6327 assert(op_branch->ublock() == NULL || code->index_of(op_branch->ublock()) != -1, "branch target not valid");
6328 }
6329 }
6331 for (j = 0; j < block->number_of_sux() - 1; j++) {
6332 BlockBegin* sux = block->sux_at(j);
6333 assert(code->index_of(sux) != -1, "successor not valid");
6334 }
6336 for (j = 0; j < block->number_of_preds() - 1; j++) {
6337 BlockBegin* pred = block->pred_at(j);
6338 assert(code->index_of(pred) != -1, "successor not valid");
6339 }
6340 }
6341 }
6342 #endif
6345 #ifndef PRODUCT
6347 // Implementation of LinearStatistic
6349 const char* LinearScanStatistic::counter_name(int counter_idx) {
6350 switch (counter_idx) {
6351 case counter_method: return "compiled methods";
6352 case counter_fpu_method: return "methods using fpu";
6353 case counter_loop_method: return "methods with loops";
6354 case counter_exception_method:return "methods with xhandler";
6356 case counter_loop: return "loops";
6357 case counter_block: return "blocks";
6358 case counter_loop_block: return "blocks inside loop";
6359 case counter_exception_block: return "exception handler entries";
6360 case counter_interval: return "intervals";
6361 case counter_fixed_interval: return "fixed intervals";
6362 case counter_range: return "ranges";
6363 case counter_fixed_range: return "fixed ranges";
6364 case counter_use_pos: return "use positions";
6365 case counter_fixed_use_pos: return "fixed use positions";
6366 case counter_spill_slots: return "spill slots";
6368 // counter for classes of lir instructions
6369 case counter_instruction: return "total instructions";
6370 case counter_label: return "labels";
6371 case counter_entry: return "method entries";
6372 case counter_return: return "method returns";
6373 case counter_call: return "method calls";
6374 case counter_move: return "moves";
6375 case counter_cmp: return "compare";
6376 case counter_cond_branch: return "conditional branches";
6377 case counter_uncond_branch: return "unconditional branches";
6378 case counter_stub_branch: return "branches to stub";
6379 case counter_alu: return "artithmetic + logic";
6380 case counter_alloc: return "allocations";
6381 case counter_sync: return "synchronisation";
6382 case counter_throw: return "throw";
6383 case counter_unwind: return "unwind";
6384 case counter_typecheck: return "type+null-checks";
6385 case counter_fpu_stack: return "fpu-stack";
6386 case counter_misc_inst: return "other instructions";
6387 case counter_other_inst: return "misc. instructions";
6389 // counter for different types of moves
6390 case counter_move_total: return "total moves";
6391 case counter_move_reg_reg: return "register->register";
6392 case counter_move_reg_stack: return "register->stack";
6393 case counter_move_stack_reg: return "stack->register";
6394 case counter_move_stack_stack:return "stack->stack";
6395 case counter_move_reg_mem: return "register->memory";
6396 case counter_move_mem_reg: return "memory->register";
6397 case counter_move_const_any: return "constant->any";
6399 case blank_line_1: return "";
6400 case blank_line_2: return "";
6402 default: ShouldNotReachHere(); return "";
6403 }
6404 }
6406 LinearScanStatistic::Counter LinearScanStatistic::base_counter(int counter_idx) {
6407 if (counter_idx == counter_fpu_method || counter_idx == counter_loop_method || counter_idx == counter_exception_method) {
6408 return counter_method;
6409 } else if (counter_idx == counter_loop_block || counter_idx == counter_exception_block) {
6410 return counter_block;
6411 } else if (counter_idx >= counter_instruction && counter_idx <= counter_other_inst) {
6412 return counter_instruction;
6413 } else if (counter_idx >= counter_move_total && counter_idx <= counter_move_const_any) {
6414 return counter_move_total;
6415 }
6416 return invalid_counter;
6417 }
6419 LinearScanStatistic::LinearScanStatistic() {
6420 for (int i = 0; i < number_of_counters; i++) {
6421 _counters_sum[i] = 0;
6422 _counters_max[i] = -1;
6423 }
6425 }
6427 // add the method-local numbers to the total sum
6428 void LinearScanStatistic::sum_up(LinearScanStatistic &method_statistic) {
6429 for (int i = 0; i < number_of_counters; i++) {
6430 _counters_sum[i] += method_statistic._counters_sum[i];
6431 _counters_max[i] = MAX2(_counters_max[i], method_statistic._counters_sum[i]);
6432 }
6433 }
6435 void LinearScanStatistic::print(const char* title) {
6436 if (CountLinearScan || TraceLinearScanLevel > 0) {
6437 tty->cr();
6438 tty->print_cr("***** LinearScan statistic - %s *****", title);
6440 for (int i = 0; i < number_of_counters; i++) {
6441 if (_counters_sum[i] > 0 || _counters_max[i] >= 0) {
6442 tty->print("%25s: %8d", counter_name(i), _counters_sum[i]);
6444 if (base_counter(i) != invalid_counter) {
6445 tty->print(" (%5.1f%%) ", _counters_sum[i] * 100.0 / _counters_sum[base_counter(i)]);
6446 } else {
6447 tty->print(" ");
6448 }
6450 if (_counters_max[i] >= 0) {
6451 tty->print("%8d", _counters_max[i]);
6452 }
6453 }
6454 tty->cr();
6455 }
6456 }
6457 }
6459 void LinearScanStatistic::collect(LinearScan* allocator) {
6460 inc_counter(counter_method);
6461 if (allocator->has_fpu_registers()) {
6462 inc_counter(counter_fpu_method);
6463 }
6464 if (allocator->num_loops() > 0) {
6465 inc_counter(counter_loop_method);
6466 }
6467 inc_counter(counter_loop, allocator->num_loops());
6468 inc_counter(counter_spill_slots, allocator->max_spills());
6470 int i;
6471 for (i = 0; i < allocator->interval_count(); i++) {
6472 Interval* cur = allocator->interval_at(i);
6474 if (cur != NULL) {
6475 inc_counter(counter_interval);
6476 inc_counter(counter_use_pos, cur->num_use_positions());
6477 if (LinearScan::is_precolored_interval(cur)) {
6478 inc_counter(counter_fixed_interval);
6479 inc_counter(counter_fixed_use_pos, cur->num_use_positions());
6480 }
6482 Range* range = cur->first();
6483 while (range != Range::end()) {
6484 inc_counter(counter_range);
6485 if (LinearScan::is_precolored_interval(cur)) {
6486 inc_counter(counter_fixed_range);
6487 }
6488 range = range->next();
6489 }
6490 }
6491 }
6493 bool has_xhandlers = false;
6494 // Note: only count blocks that are in code-emit order
6495 for (i = 0; i < allocator->ir()->code()->length(); i++) {
6496 BlockBegin* cur = allocator->ir()->code()->at(i);
6498 inc_counter(counter_block);
6499 if (cur->loop_depth() > 0) {
6500 inc_counter(counter_loop_block);
6501 }
6502 if (cur->is_set(BlockBegin::exception_entry_flag)) {
6503 inc_counter(counter_exception_block);
6504 has_xhandlers = true;
6505 }
6507 LIR_OpList* instructions = cur->lir()->instructions_list();
6508 for (int j = 0; j < instructions->length(); j++) {
6509 LIR_Op* op = instructions->at(j);
6511 inc_counter(counter_instruction);
6513 switch (op->code()) {
6514 case lir_label: inc_counter(counter_label); break;
6515 case lir_std_entry:
6516 case lir_osr_entry: inc_counter(counter_entry); break;
6517 case lir_return: inc_counter(counter_return); break;
6519 case lir_rtcall:
6520 case lir_static_call:
6521 case lir_optvirtual_call:
6522 case lir_virtual_call: inc_counter(counter_call); break;
6524 case lir_move: {
6525 inc_counter(counter_move);
6526 inc_counter(counter_move_total);
6528 LIR_Opr in = op->as_Op1()->in_opr();
6529 LIR_Opr res = op->as_Op1()->result_opr();
6530 if (in->is_register()) {
6531 if (res->is_register()) {
6532 inc_counter(counter_move_reg_reg);
6533 } else if (res->is_stack()) {
6534 inc_counter(counter_move_reg_stack);
6535 } else if (res->is_address()) {
6536 inc_counter(counter_move_reg_mem);
6537 } else {
6538 ShouldNotReachHere();
6539 }
6540 } else if (in->is_stack()) {
6541 if (res->is_register()) {
6542 inc_counter(counter_move_stack_reg);
6543 } else {
6544 inc_counter(counter_move_stack_stack);
6545 }
6546 } else if (in->is_address()) {
6547 assert(res->is_register(), "must be");
6548 inc_counter(counter_move_mem_reg);
6549 } else if (in->is_constant()) {
6550 inc_counter(counter_move_const_any);
6551 } else {
6552 ShouldNotReachHere();
6553 }
6554 break;
6555 }
6557 case lir_cmp: inc_counter(counter_cmp); break;
6559 case lir_branch:
6560 case lir_cond_float_branch: {
6561 LIR_OpBranch* branch = op->as_OpBranch();
6562 if (branch->block() == NULL) {
6563 inc_counter(counter_stub_branch);
6564 } else if (branch->cond() == lir_cond_always) {
6565 inc_counter(counter_uncond_branch);
6566 } else {
6567 inc_counter(counter_cond_branch);
6568 }
6569 break;
6570 }
6572 case lir_neg:
6573 case lir_add:
6574 case lir_sub:
6575 case lir_mul:
6576 case lir_mul_strictfp:
6577 case lir_div:
6578 case lir_div_strictfp:
6579 case lir_rem:
6580 case lir_sqrt:
6581 case lir_sin:
6582 case lir_cos:
6583 case lir_abs:
6584 case lir_log10:
6585 case lir_log:
6586 case lir_pow:
6587 case lir_exp:
6588 case lir_logic_and:
6589 case lir_logic_or:
6590 case lir_logic_xor:
6591 case lir_shl:
6592 case lir_shr:
6593 case lir_ushr: inc_counter(counter_alu); break;
6595 case lir_alloc_object:
6596 case lir_alloc_array: inc_counter(counter_alloc); break;
6598 case lir_monaddr:
6599 case lir_lock:
6600 case lir_unlock: inc_counter(counter_sync); break;
6602 case lir_throw: inc_counter(counter_throw); break;
6604 case lir_unwind: inc_counter(counter_unwind); break;
6606 case lir_null_check:
6607 case lir_leal:
6608 case lir_instanceof:
6609 case lir_checkcast:
6610 case lir_store_check: inc_counter(counter_typecheck); break;
6612 case lir_fpop_raw:
6613 case lir_fxch:
6614 case lir_fld: inc_counter(counter_fpu_stack); break;
6616 case lir_nop:
6617 case lir_push:
6618 case lir_pop:
6619 case lir_convert:
6620 case lir_roundfp:
6621 case lir_cmove: inc_counter(counter_misc_inst); break;
6623 default: inc_counter(counter_other_inst); break;
6624 }
6625 }
6626 }
6628 if (has_xhandlers) {
6629 inc_counter(counter_exception_method);
6630 }
6631 }
6633 void LinearScanStatistic::compute(LinearScan* allocator, LinearScanStatistic &global_statistic) {
6634 if (CountLinearScan || TraceLinearScanLevel > 0) {
6636 LinearScanStatistic local_statistic = LinearScanStatistic();
6638 local_statistic.collect(allocator);
6639 global_statistic.sum_up(local_statistic);
6641 if (TraceLinearScanLevel > 2) {
6642 local_statistic.print("current local statistic");
6643 }
6644 }
6645 }
6648 // Implementation of LinearTimers
6650 LinearScanTimers::LinearScanTimers() {
6651 for (int i = 0; i < number_of_timers; i++) {
6652 timer(i)->reset();
6653 }
6654 }
6656 const char* LinearScanTimers::timer_name(int idx) {
6657 switch (idx) {
6658 case timer_do_nothing: return "Nothing (Time Check)";
6659 case timer_number_instructions: return "Number Instructions";
6660 case timer_compute_local_live_sets: return "Local Live Sets";
6661 case timer_compute_global_live_sets: return "Global Live Sets";
6662 case timer_build_intervals: return "Build Intervals";
6663 case timer_sort_intervals_before: return "Sort Intervals Before";
6664 case timer_allocate_registers: return "Allocate Registers";
6665 case timer_resolve_data_flow: return "Resolve Data Flow";
6666 case timer_sort_intervals_after: return "Sort Intervals After";
6667 case timer_eliminate_spill_moves: return "Spill optimization";
6668 case timer_assign_reg_num: return "Assign Reg Num";
6669 case timer_allocate_fpu_stack: return "Allocate FPU Stack";
6670 case timer_optimize_lir: return "Optimize LIR";
6671 default: ShouldNotReachHere(); return "";
6672 }
6673 }
6675 void LinearScanTimers::begin_method() {
6676 if (TimeEachLinearScan) {
6677 // reset all timers to measure only current method
6678 for (int i = 0; i < number_of_timers; i++) {
6679 timer(i)->reset();
6680 }
6681 }
6682 }
6684 void LinearScanTimers::end_method(LinearScan* allocator) {
6685 if (TimeEachLinearScan) {
6687 double c = timer(timer_do_nothing)->seconds();
6688 double total = 0;
6689 for (int i = 1; i < number_of_timers; i++) {
6690 total += timer(i)->seconds() - c;
6691 }
6693 if (total >= 0.0005) {
6694 // print all information in one line for automatic processing
6695 tty->print("@"); allocator->compilation()->method()->print_name();
6697 tty->print("@ %d ", allocator->compilation()->method()->code_size());
6698 tty->print("@ %d ", allocator->block_at(allocator->block_count() - 1)->last_lir_instruction_id() / 2);
6699 tty->print("@ %d ", allocator->block_count());
6700 tty->print("@ %d ", allocator->num_virtual_regs());
6701 tty->print("@ %d ", allocator->interval_count());
6702 tty->print("@ %d ", allocator->_num_calls);
6703 tty->print("@ %d ", allocator->num_loops());
6705 tty->print("@ %6.6f ", total);
6706 for (int i = 1; i < number_of_timers; i++) {
6707 tty->print("@ %4.1f ", ((timer(i)->seconds() - c) / total) * 100);
6708 }
6709 tty->cr();
6710 }
6711 }
6712 }
6714 void LinearScanTimers::print(double total_time) {
6715 if (TimeLinearScan) {
6716 // correction value: sum of dummy-timer that only measures the time that
6717 // is necesary to start and stop itself
6718 double c = timer(timer_do_nothing)->seconds();
6720 for (int i = 0; i < number_of_timers; i++) {
6721 double t = timer(i)->seconds();
6722 tty->print_cr(" %25s: %6.3f s (%4.1f%%) corrected: %6.3f s (%4.1f%%)", timer_name(i), t, (t / total_time) * 100.0, t - c, (t - c) / (total_time - 2 * number_of_timers * c) * 100);
6723 }
6724 }
6725 }
6727 #endif // #ifndef PRODUCT