jdk8-mips64-public/hotspot: src/cpu/sparc/vm/nativeInst

src/cpu/sparc/vm/nativeInst_sparc.cpp@9c2ecc2ffb12 (annotated)

src/cpu/sparc/vm/nativeInst_sparc.cpp

Fri, 11 Jul 2008 01:14:44 -0700

author: trims
date: Fri, 11 Jul 2008 01:14:44 -0700
changeset 670: 9c2ecc2ffb12
parent 631: d1605aabd0a1
child 1162: 6b2273dd6fa9
permissions: -rw-r--r--

Merge

 /*
  * Copyright 1997-2008 Sun Microsystems, Inc.  All Rights Reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 only, as
  * published by the Free Software Foundation.
  *
  * This code is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * version 2 for more details (a copy is included in the LICENSE file that
  * accompanied this code).
  *
  * You should have received a copy of the GNU General Public License version
  * 2 along with this work; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
  * CA 95054 USA or visit www.sun.com if you need additional information or
  * have any questions.
  *
  */
 # include "incls/_precompiled.incl"
 # include "incls/_nativeInst_sparc.cpp.incl"
 bool NativeInstruction::is_dtrace_trap() {
   return !is_nop();
 }
 void NativeInstruction::set_data64_sethi(address instaddr, intptr_t x) {
   ResourceMark rm;
   CodeBuffer buf(instaddr, 10 * BytesPerInstWord );
   MacroAssembler* _masm = new MacroAssembler(&buf);
   Register destreg;
   destreg = inv_rd(*(unsigned int *)instaddr);
   // Generate a the new sequence
   Address dest( destreg, (address)x );
   _masm->sethi( dest, true );
   ICache::invalidate_range(instaddr, 7 * BytesPerInstWord);
 }
 void NativeInstruction::verify() {
   // make sure code pattern is actually an instruction address
   address addr = addr_at(0);
   if (addr == 0 || ((intptr_t)addr & 3) != 0) {
     fatal("not an instruction address");
   }
 }
 void NativeInstruction::print() {
   tty->print_cr(INTPTR_FORMAT ": 0x%x", addr_at(0), long_at(0));
 }
 void NativeInstruction::set_long_at(int offset, int i) {
   address addr = addr_at(offset);
   *(int*)addr = i;
   ICache::invalidate_word(addr);
 }
 void NativeInstruction::set_jlong_at(int offset, jlong i) {
   address addr = addr_at(offset);
   *(jlong*)addr = i;
   // Don't need to invalidate 2 words here, because
   // the flush instruction operates on doublewords.
   ICache::invalidate_word(addr);
 }
 void NativeInstruction::set_addr_at(int offset, address x) {
   address addr = addr_at(offset);
   assert( ((intptr_t)addr & (wordSize-1)) == 0, "set_addr_at bad address alignment");
   *(uintptr_t*)addr = (uintptr_t)x;
   // Don't need to invalidate 2 words here in the 64-bit case,
   // because the flush instruction operates on doublewords.
   ICache::invalidate_word(addr);
   // The Intel code has this assertion for NativeCall::set_destination,
   // NativeMovConstReg::set_data, NativeMovRegMem::set_offset,
   // NativeJump::set_jump_destination, and NativePushImm32::set_data
   //assert (Patching_lock->owned_by_self(), "must hold lock to patch instruction")
 }
 bool NativeInstruction::is_zero_test(Register &reg) {
   int x = long_at(0);
   Assembler::op3s temp = (Assembler::op3s) (Assembler::sub_op3 | Assembler::cc_bit_op3);
   if (is_op3(x, temp, Assembler::arith_op) &&
       inv_immed(x) && inv_rd(x) == G0) {
       if (inv_rs1(x) == G0) {
         reg = inv_rs2(x);
         return true;
       } else if (inv_rs2(x) == G0) {
         reg = inv_rs1(x);
         return true;
       }
   }
   return false;
 }
 bool NativeInstruction::is_load_store_with_small_offset(Register reg) {
   int x = long_at(0);
   if (is_op(x, Assembler::ldst_op) &&
       inv_rs1(x) == reg && inv_immed(x)) {
     return true;
   }
   return false;
 }
 void NativeCall::verify() {
   NativeInstruction::verify();
   // make sure code pattern is actually a call instruction
   if (!is_op(long_at(0), Assembler::call_op)) {
     fatal("not a call");
   }
 }
 void NativeCall::print() {
   tty->print_cr(INTPTR_FORMAT ": call " INTPTR_FORMAT, instruction_address(), destination());
 }
 // MT-safe patching of a call instruction (and following word).
 // First patches the second word, and then atomicly replaces
 // the first word with the first new instruction word.
 // Other processors might briefly see the old first word
 // followed by the new second word.  This is OK if the old
 // second word is harmless, and the new second word may be
 // harmlessly executed in the delay slot of the call.
 void NativeCall::replace_mt_safe(address instr_addr, address code_buffer) {
   assert(Patching_lock->is_locked() ||
          SafepointSynchronize::is_at_safepoint(), "concurrent code patching");
    assert (instr_addr != NULL, "illegal address for code patching");
    NativeCall* n_call =  nativeCall_at (instr_addr); // checking that it is a call
    assert(NativeCall::instruction_size == 8, "wrong instruction size; must be 8");
    int i0 = ((int*)code_buffer)[0];
    int i1 = ((int*)code_buffer)[1];
    int* contention_addr = (int*) n_call->addr_at(1*BytesPerInstWord);
    assert(inv_op(*contention_addr) == Assembler::arith_op ||
           *contention_addr == nop_instruction() || !VM_Version::v9_instructions_work(),
           "must not interfere with original call");
    // The set_long_at calls do the ICacheInvalidate so we just need to do them in reverse order
    n_call->set_long_at(1*BytesPerInstWord, i1);
    n_call->set_long_at(0*BytesPerInstWord, i0);
    // NOTE:  It is possible that another thread T will execute
    // only the second patched word.
    // In other words, since the original instruction is this
    //    call patching_stub; nop                   (NativeCall)
    // and the new sequence from the buffer is this:
    //    sethi %hi(K), %r; add %r, %lo(K), %r      (NativeMovConstReg)
    // what T will execute is this:
    //    call patching_stub; add %r, %lo(K), %r
    // thereby putting garbage into %r before calling the patching stub.
    // This is OK, because the patching stub ignores the value of %r.
    // Make sure the first-patched instruction, which may co-exist
    // briefly with the call, will do something harmless.
    assert(inv_op(*contention_addr) == Assembler::arith_op ||
           *contention_addr == nop_instruction() || !VM_Version::v9_instructions_work(),
           "must not interfere with original call");
 }
 // Similar to replace_mt_safe, but just changes the destination.  The
 // important thing is that free-running threads are able to execute this
 // call instruction at all times.  Thus, the displacement field must be
 // instruction-word-aligned.  This is always true on SPARC.
 //
 // Used in the runtime linkage of calls; see class CompiledIC.
 void NativeCall::set_destination_mt_safe(address dest) {
   assert(Patching_lock->is_locked() ||
          SafepointSynchronize::is_at_safepoint(), "concurrent code patching");
   // set_destination uses set_long_at which does the ICache::invalidate
   set_destination(dest);
 }
 // Code for unit testing implementation of NativeCall class
 void NativeCall::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 100, 100);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeCall  *nc;
   uint idx;
   int offsets[] = {
 x0,
 xfffffff0,
 x7ffffff0,
 x80000000,
 x20,
 x4000,
   };
   VM_Version::allow_all();
   a->call( a->pc(), relocInfo::none );
   a->delayed()->nop();
   nc = nativeCall_at( cb.code_begin() );
   nc->print();
   nc = nativeCall_overwriting_at( nc->next_instruction_address() );
   for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) {
     nc->set_destination( cb.code_begin() + offsets[idx] );
     assert(nc->destination() == (cb.code_begin() + offsets[idx]), "check unit test");
     nc->print();
   }
   nc = nativeCall_before( cb.code_begin() + 8 );
   nc->print();
   VM_Version::revert();
 #endif
 }
 // End code for unit testing implementation of NativeCall class
 //-------------------------------------------------------------------
 #ifdef _LP64
 void NativeFarCall::set_destination(address dest) {
   // Address materialized in the instruction stream, so nothing to do.
   return;
 #if 0 // What we'd do if we really did want to change the destination
   if (destination() == dest) {
     return;
   }
   ResourceMark rm;
   CodeBuffer buf(addr_at(0), instruction_size + 1);
   MacroAssembler* _masm = new MacroAssembler(&buf);
   // Generate the new sequence
   Address(O7, dest);
   _masm->jumpl_to(dest, O7);
   ICache::invalidate_range(addr_at(0), instruction_size );
 #endif
 }
 void NativeFarCall::verify() {
   // make sure code pattern is actually a jumpl_to instruction
   assert((int)instruction_size == (int)NativeJump::instruction_size, "same as jump_to");
   assert((int)jmpl_offset == (int)NativeMovConstReg::add_offset, "sethi size ok");
   nativeJump_at(addr_at(0))->verify();
 }
 bool NativeFarCall::is_call_at(address instr) {
   return nativeInstruction_at(instr)->is_sethi();
 }
 void NativeFarCall::print() {
   tty->print_cr(INTPTR_FORMAT ": call " INTPTR_FORMAT, instruction_address(), destination());
 }
 bool NativeFarCall::destination_is_compiled_verified_entry_point() {
   nmethod* callee = CodeCache::find_nmethod(destination());
   if (callee == NULL) {
     return false;
   } else {
     return destination() == callee->verified_entry_point();
   }
 }
 // MT-safe patching of a far call.
 void NativeFarCall::replace_mt_safe(address instr_addr, address code_buffer) {
   Unimplemented();
 }
 // Code for unit testing implementation of NativeFarCall class
 void NativeFarCall::test() {
   Unimplemented();
 }
 // End code for unit testing implementation of NativeFarCall class
 #endif // _LP64
 //-------------------------------------------------------------------
 void NativeMovConstReg::verify() {
   NativeInstruction::verify();
   // make sure code pattern is actually a "set_oop" synthetic instruction
   // see MacroAssembler::set_oop()
   int i0 = long_at(sethi_offset);
   int i1 = long_at(add_offset);
   // verify the pattern "sethi %hi22(imm), reg ;  add reg, %lo10(imm), reg"
   Register rd = inv_rd(i0);
 #ifndef _LP64
   if (!(is_op2(i0, Assembler::sethi_op2) && rd != G0 &&
         is_op3(i1, Assembler::add_op3, Assembler::arith_op) &&
         inv_immed(i1) && (unsigned)get_simm13(i1) < (1 << 10) &&
         rd == inv_rs1(i1) && rd == inv_rd(i1))) {
     fatal("not a set_oop");
   }
 #else
   if (!is_op2(i0, Assembler::sethi_op2) && rd != G0 ) {
     fatal("not a set_oop");
   }
 #endif
 }
 void NativeMovConstReg::print() {
   tty->print_cr(INTPTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data());
 }
 #ifdef _LP64
 intptr_t NativeMovConstReg::data() const {
   return data64(addr_at(sethi_offset), long_at(add_offset));
 }
 #else
 intptr_t NativeMovConstReg::data() const {
   return data32(long_at(sethi_offset), long_at(add_offset));
 }
 #endif
 void NativeMovConstReg::set_data(intptr_t x) {
 #ifdef _LP64
   set_data64_sethi(addr_at(sethi_offset), x);
 #else
   set_long_at(sethi_offset, set_data32_sethi(  long_at(sethi_offset), x));
 #endif
   set_long_at(add_offset,   set_data32_simm13( long_at(add_offset),   x));
   // also store the value into an oop_Relocation cell, if any
   CodeBlob* nm = CodeCache::find_blob(instruction_address());
   if (nm != NULL) {
     RelocIterator iter(nm, instruction_address(), next_instruction_address());
     oop* oop_addr = NULL;
     while (iter.next()) {
       if (iter.type() == relocInfo::oop_type) {
         oop_Relocation *r = iter.oop_reloc();
         if (oop_addr == NULL) {
           oop_addr = r->oop_addr();
           *oop_addr = (oop)x;
         } else {
           assert(oop_addr == r->oop_addr(), "must be only one set-oop here");
         }
       }
     }
   }
 }
 // Code for unit testing implementation of NativeMovConstReg class
 void NativeMovConstReg::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 100, 100);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeMovConstReg* nm;
   uint idx;
   int offsets[] = {
 x0,
 x7fffffff,
 x80000000,
 xffffffff,
 x20,
 ,
 ,
   };
   VM_Version::allow_all();
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none);
   a->add(I3, low10(0xaaaabbbb), I3);
   a->sethi(0xccccdddd, O2, true, RelocationHolder::none);
   a->add(O2, low10(0xccccdddd), O2);
   nm = nativeMovConstReg_at( cb.code_begin() );
   nm->print();
   nm = nativeMovConstReg_at( nm->next_instruction_address() );
   for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) {
     nm->set_data( offsets[idx] );
     assert(nm->data() == offsets[idx], "check unit test");
   }
   nm->print();
   VM_Version::revert();
 #endif
 }
 // End code for unit testing implementation of NativeMovConstReg class
 //-------------------------------------------------------------------
 void NativeMovConstRegPatching::verify() {
   NativeInstruction::verify();
   // Make sure code pattern is sethi/nop/add.
   int i0 = long_at(sethi_offset);
   int i1 = long_at(nop_offset);
   int i2 = long_at(add_offset);
   assert((int)nop_offset == (int)NativeMovConstReg::add_offset, "sethi size ok");
   // Verify the pattern "sethi %hi22(imm), reg; nop; add reg, %lo10(imm), reg"
   // The casual reader should note that on Sparc a nop is a special case if sethi
   // in which the destination register is %g0.
   Register rd0 = inv_rd(i0);
   Register rd1 = inv_rd(i1);
   if (!(is_op2(i0, Assembler::sethi_op2) && rd0 != G0 &&
         is_op2(i1, Assembler::sethi_op2) && rd1 == G0 &&        // nop is a special case of sethi
         is_op3(i2, Assembler::add_op3, Assembler::arith_op) &&
         inv_immed(i2) && (unsigned)get_simm13(i2) < (1 << 10) &&
         rd0 == inv_rs1(i2) && rd0 == inv_rd(i2))) {
     fatal("not a set_oop");
   }
 }
 void NativeMovConstRegPatching::print() {
   tty->print_cr(INTPTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data());
 }
 int NativeMovConstRegPatching::data() const {
 #ifdef _LP64
   return data64(addr_at(sethi_offset), long_at(add_offset));
 #else
   return data32(long_at(sethi_offset), long_at(add_offset));
 #endif
 }
 void NativeMovConstRegPatching::set_data(int x) {
 #ifdef _LP64
   set_data64_sethi(addr_at(sethi_offset), x);
 #else
   set_long_at(sethi_offset, set_data32_sethi(long_at(sethi_offset), x));
 #endif
   set_long_at(add_offset, set_data32_simm13(long_at(add_offset), x));
   // also store the value into an oop_Relocation cell, if any
   CodeBlob* nm = CodeCache::find_blob(instruction_address());
   if (nm != NULL) {
     RelocIterator iter(nm, instruction_address(), next_instruction_address());
     oop* oop_addr = NULL;
     while (iter.next()) {
       if (iter.type() == relocInfo::oop_type) {
         oop_Relocation *r = iter.oop_reloc();
         if (oop_addr == NULL) {
           oop_addr = r->oop_addr();
           *oop_addr = (oop)x;
         } else {
           assert(oop_addr == r->oop_addr(), "must be only one set-oop here");
         }
       }
     }
   }
 }
 // Code for unit testing implementation of NativeMovConstRegPatching class
 void NativeMovConstRegPatching::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 100, 100);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeMovConstRegPatching* nm;
   uint idx;
   int offsets[] = {
 x0,
 x7fffffff,
 x80000000,
 xffffffff,
 x20,
 ,
 ,
   };
   VM_Version::allow_all();
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none);
   a->nop();
   a->add(I3, low10(0xaaaabbbb), I3);
   a->sethi(0xccccdddd, O2, true, RelocationHolder::none);
   a->nop();
   a->add(O2, low10(0xccccdddd), O2);
   nm = nativeMovConstRegPatching_at( cb.code_begin() );
   nm->print();
   nm = nativeMovConstRegPatching_at( nm->next_instruction_address() );
   for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) {
     nm->set_data( offsets[idx] );
     assert(nm->data() == offsets[idx], "check unit test");
   }
   nm->print();
   VM_Version::revert();
 #endif // ASSERT
 }
 // End code for unit testing implementation of NativeMovConstRegPatching class
 //-------------------------------------------------------------------
 void NativeMovRegMem::copy_instruction_to(address new_instruction_address) {
   Untested("copy_instruction_to");
   int instruction_size = next_instruction_address() - instruction_address();
   for (int i = 0; i < instruction_size; i += BytesPerInstWord) {
     *(int*)(new_instruction_address + i) = *(int*)(address(this) + i);
   }
 }
 void NativeMovRegMem::verify() {
   NativeInstruction::verify();
   // make sure code pattern is actually a "ld" or "st" of some sort.
   int i0 = long_at(0);
   int op3 = inv_op3(i0);
   assert((int)add_offset == NativeMovConstReg::add_offset, "sethi size ok");
   if (!(is_op(i0, Assembler::ldst_op) &&
         inv_immed(i0) &&
 != (op3 < op3_ldst_int_limit
          ? (1 <<  op3                      ) & (op3_mask_ld  | op3_mask_st)
          : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf))))
   {
     int i1 = long_at(ldst_offset);
     Register rd = inv_rd(i0);
     op3 = inv_op3(i1);
     if (!is_op(i1, Assembler::ldst_op) && rd == inv_rs2(i1) &&
 != (op3 < op3_ldst_int_limit
               ? (1 <<  op3                      ) & (op3_mask_ld  | op3_mask_st)
                : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf))) {
       fatal("not a ld* or st* op");
     }
   }
 }
 void NativeMovRegMem::print() {
   if (is_immediate()) {
     tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + %x]", instruction_address(), offset());
   } else {
     tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + reg]", instruction_address());
   }
 }
 // Code for unit testing implementation of NativeMovRegMem class
 void NativeMovRegMem::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 1000, 1000);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeMovRegMem* nm;
   uint idx = 0;
   uint idx1;
   int offsets[] = {
 x0,
 xffffffff,
 x7fffffff,
 x80000000,
 ,
 ,
 x20,
 x4000,
   };
   VM_Version::allow_all();
   a->ldsw( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsw( G5, I3, G4 ); idx++;
   a->ldsb( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsb( G5, I3, G4 ); idx++;
   a->ldsh( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsh( G5, I3, G4 ); idx++;
   a->lduw( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->lduw( G5, I3, G4 ); idx++;
   a->ldub( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldub( G5, I3, G4 ); idx++;
   a->lduh( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->lduh( G5, I3, G4 ); idx++;
   a->ldx( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldx( G5, I3, G4 ); idx++;
   a->ldd( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldd( G5, I3, G4 ); idx++;
   a->ldf( FloatRegisterImpl::D, O2, -1, F14 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldf( FloatRegisterImpl::S, O0, I3, F15 ); idx++;
   a->stw( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->stw( G5, G4, I3 ); idx++;
   a->stb( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->stb( G5, G4, I3 ); idx++;
   a->sth( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->sth( G5, G4, I3 ); idx++;
   a->stx( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->stx( G5, G4, I3 ); idx++;
   a->std( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->std( G5, G4, I3 ); idx++;
   a->stf( FloatRegisterImpl::S, F18, O2, -1 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->add(I3, low10(0xaaaabbbb), I3);
   a->stf( FloatRegisterImpl::S, F15, O0, I3 ); idx++;
   nm = nativeMovRegMem_at( cb.code_begin() );
   nm->print();
   nm->set_offset( low10(0) );
   nm->print();
   nm->add_offset_in_bytes( low10(0xbb) * wordSize );
   nm->print();
   while (--idx) {
     nm = nativeMovRegMem_at( nm->next_instruction_address() );
     nm->print();
     for (idx1 = 0; idx1 < ARRAY_SIZE(offsets); idx1++) {
       nm->set_offset( nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1] );
       assert(nm->offset() == (nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1]),
              "check unit test");
       nm->print();
     }
     nm->add_offset_in_bytes( low10(0xbb) * wordSize );
     nm->print();
   }
   VM_Version::revert();
 #endif // ASSERT
 }
 // End code for unit testing implementation of NativeMovRegMem class
 //--------------------------------------------------------------------------------
 void NativeMovRegMemPatching::copy_instruction_to(address new_instruction_address) {
   Untested("copy_instruction_to");
   int instruction_size = next_instruction_address() - instruction_address();
   for (int i = 0; i < instruction_size; i += wordSize) {
     *(long*)(new_instruction_address + i) = *(long*)(address(this) + i);
   }
 }
 void NativeMovRegMemPatching::verify() {
   NativeInstruction::verify();
   // make sure code pattern is actually a "ld" or "st" of some sort.
   int i0 = long_at(0);
   int op3 = inv_op3(i0);
   assert((int)nop_offset == (int)NativeMovConstReg::add_offset, "sethi size ok");
   if (!(is_op(i0, Assembler::ldst_op) &&
         inv_immed(i0) &&
 != (op3 < op3_ldst_int_limit
          ? (1 <<  op3                      ) & (op3_mask_ld  | op3_mask_st)
          : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf)))) {
     int i1 = long_at(ldst_offset);
     Register rd = inv_rd(i0);
     op3 = inv_op3(i1);
     if (!is_op(i1, Assembler::ldst_op) && rd == inv_rs2(i1) &&
 != (op3 < op3_ldst_int_limit
               ? (1 <<  op3                      ) & (op3_mask_ld  | op3_mask_st)
               : (1 << (op3 - op3_ldst_int_limit)) & (op3_mask_ldf | op3_mask_stf))) {
       fatal("not a ld* or st* op");
     }
   }
 }
 void NativeMovRegMemPatching::print() {
   if (is_immediate()) {
     tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + %x]", instruction_address(), offset());
   } else {
     tty->print_cr(INTPTR_FORMAT ": mov reg, [reg + reg]", instruction_address());
   }
 }
 // Code for unit testing implementation of NativeMovRegMemPatching class
 void NativeMovRegMemPatching::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 1000, 1000);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeMovRegMemPatching* nm;
   uint idx = 0;
   uint idx1;
   int offsets[] = {
 x0,
 xffffffff,
 x7fffffff,
 x80000000,
 ,
 ,
 x20,
 x4000,
   };
   VM_Version::allow_all();
   a->ldsw( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsw( G5, I3, G4 ); idx++;
   a->ldsb( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsb( G5, I3, G4 ); idx++;
   a->ldsh( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldsh( G5, I3, G4 ); idx++;
   a->lduw( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->lduw( G5, I3, G4 ); idx++;
   a->ldub( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldub( G5, I3, G4 ); idx++;
   a->lduh( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->lduh( G5, I3, G4 ); idx++;
   a->ldx( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldx( G5, I3, G4 ); idx++;
   a->ldd( G5, low10(0xffffffff), G4 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldd( G5, I3, G4 ); idx++;
   a->ldf( FloatRegisterImpl::D, O2, -1, F14 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->ldf( FloatRegisterImpl::S, O0, I3, F15 ); idx++;
   a->stw( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->stw( G5, G4, I3 ); idx++;
   a->stb( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->stb( G5, G4, I3 ); idx++;
   a->sth( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->sth( G5, G4, I3 ); idx++;
   a->stx( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->stx( G5, G4, I3 ); idx++;
   a->std( G5, G4, low10(0xffffffff) ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->std( G5, G4, I3 ); idx++;
   a->stf( FloatRegisterImpl::S, F18, O2, -1 ); idx++;
   a->sethi(0xaaaabbbb, I3, true, RelocationHolder::none); a->nop(); a->add(I3, low10(0xaaaabbbb), I3);
   a->stf( FloatRegisterImpl::S, F15, O0, I3 ); idx++;
   nm = nativeMovRegMemPatching_at( cb.code_begin() );
   nm->print();
   nm->set_offset( low10(0) );
   nm->print();
   nm->add_offset_in_bytes( low10(0xbb) * wordSize );
   nm->print();
   while (--idx) {
     nm = nativeMovRegMemPatching_at( nm->next_instruction_address() );
     nm->print();
     for (idx1 = 0; idx1 < ARRAY_SIZE(offsets); idx1++) {
       nm->set_offset( nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1] );
       assert(nm->offset() == (nm->is_immediate() ? low10(offsets[idx1]) : offsets[idx1]),
              "check unit test");
       nm->print();
     }
     nm->add_offset_in_bytes( low10(0xbb) * wordSize );
     nm->print();
   }
   VM_Version::revert();
 #endif // ASSERT
 }
 // End code for unit testing implementation of NativeMovRegMemPatching class
 //--------------------------------------------------------------------------------
 void NativeJump::verify() {
   NativeInstruction::verify();
   int i0 = long_at(sethi_offset);
   int i1 = long_at(jmpl_offset);
   assert((int)jmpl_offset == (int)NativeMovConstReg::add_offset, "sethi size ok");
   // verify the pattern "sethi %hi22(imm), treg ;  jmpl treg, %lo10(imm), lreg"
   Register rd = inv_rd(i0);
 #ifndef _LP64
   if (!(is_op2(i0, Assembler::sethi_op2) && rd != G0 &&
         (is_op3(i1, Assembler::jmpl_op3, Assembler::arith_op) ||
         (TraceJumps && is_op3(i1, Assembler::add_op3, Assembler::arith_op))) &&
         inv_immed(i1) && (unsigned)get_simm13(i1) < (1 << 10) &&
         rd == inv_rs1(i1))) {
     fatal("not a jump_to instruction");
   }
 #else
   // In LP64, the jump instruction location varies for non relocatable
   // jumps, for example is could be sethi, xor, jmp instead of the
   // 7 instructions for sethi.  So let's check sethi only.
   if (!is_op2(i0, Assembler::sethi_op2) && rd != G0 ) {
     fatal("not a jump_to instruction");
   }
 #endif
 }
 void NativeJump::print() {
   tty->print_cr(INTPTR_FORMAT ": jmpl reg, " INTPTR_FORMAT, instruction_address(), jump_destination());
 }
 // Code for unit testing implementation of NativeJump class
 void NativeJump::test() {
 #ifdef ASSERT
   ResourceMark rm;
   CodeBuffer cb("test", 100, 100);
   MacroAssembler* a = new MacroAssembler(&cb);
   NativeJump* nj;
   uint idx;
   int offsets[] = {
 x0,
 xffffffff,
 x7fffffff,
 x80000000,
 ,
 ,
 x20,
 x4000,
   };
   VM_Version::allow_all();
   a->sethi(0x7fffbbbb, I3, true, RelocationHolder::none);
   a->jmpl(I3, low10(0x7fffbbbb), G0, RelocationHolder::none);
   a->delayed()->nop();
   a->sethi(0x7fffbbbb, I3, true, RelocationHolder::none);
   a->jmpl(I3, low10(0x7fffbbbb), L3, RelocationHolder::none);
   a->delayed()->nop();
   nj = nativeJump_at( cb.code_begin() );
   nj->print();
   nj = nativeJump_at( nj->next_instruction_address() );
   for (idx = 0; idx < ARRAY_SIZE(offsets); idx++) {
     nj->set_jump_destination( nj->instruction_address() + offsets[idx] );
     assert(nj->jump_destination() == (nj->instruction_address() + offsets[idx]), "check unit test");
     nj->print();
   }
   VM_Version::revert();
 #endif // ASSERT
 }
 // End code for unit testing implementation of NativeJump class
 void NativeJump::insert(address code_pos, address entry) {
   Unimplemented();
 }
 // MT safe inserting of a jump over an unknown instruction sequence (used by nmethod::makeZombie)
 // The problem: jump_to <dest> is a 3-word instruction (including its delay slot).
 // Atomic write can be only with 1 word.
 void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) {
   // Here's one way to do it:  Pre-allocate a three-word jump sequence somewhere
   // in the header of the nmethod, within a short branch's span of the patch point.
   // Set up the jump sequence using NativeJump::insert, and then use an annulled
   // unconditional branch at the target site (an atomic 1-word update).
   // Limitations:  You can only patch nmethods, with any given nmethod patched at
   // most once, and the patch must be in the nmethod's header.
   // It's messy, but you can ask the CodeCache for the nmethod containing the
   // target address.
   // %%%%% For now, do something MT-stupid:
   ResourceMark rm;
   int code_size = 1 * BytesPerInstWord;
   CodeBuffer cb(verified_entry, code_size + 1);
   MacroAssembler* a = new MacroAssembler(&cb);
   if (VM_Version::v9_instructions_work()) {
     a->ldsw(G0, 0, O7); // "ld" must agree with code in the signal handler
   } else {
     a->lduw(G0, 0, O7); // "ld" must agree with code in the signal handler
   }
   ICache::invalidate_range(verified_entry, code_size);
 }
 void NativeIllegalInstruction::insert(address code_pos) {
   NativeIllegalInstruction* nii = (NativeIllegalInstruction*) nativeInstruction_at(code_pos);
   nii->set_long_at(0, illegal_instruction());
 }
 static int illegal_instruction_bits = 0;
 int NativeInstruction::illegal_instruction() {
   if (illegal_instruction_bits == 0) {
     ResourceMark rm;
     char buf[40];
     CodeBuffer cbuf((address)&buf[0], 20);
     MacroAssembler* a = new MacroAssembler(&cbuf);
     address ia = a->pc();
     a->trap(ST_RESERVED_FOR_USER_0 + 1);
     int bits = *(int*)ia;
     assert(is_op3(bits, Assembler::trap_op3, Assembler::arith_op), "bad instruction");
     illegal_instruction_bits = bits;
     assert(illegal_instruction_bits != 0, "oops");
   }
   return illegal_instruction_bits;
 }
 static int ic_miss_trap_bits = 0;
 bool NativeInstruction::is_ic_miss_trap() {
   if (ic_miss_trap_bits == 0) {
     ResourceMark rm;
     char buf[40];
     CodeBuffer cbuf((address)&buf[0], 20);
     MacroAssembler* a = new MacroAssembler(&cbuf);
     address ia = a->pc();
     a->trap(Assembler::notEqual, Assembler::ptr_cc, G0, ST_RESERVED_FOR_USER_0 + 2);
     int bits = *(int*)ia;
     assert(is_op3(bits, Assembler::trap_op3, Assembler::arith_op), "bad instruction");
     ic_miss_trap_bits = bits;
     assert(ic_miss_trap_bits != 0, "oops");
   }
   return long_at(0) == ic_miss_trap_bits;
 }
 bool NativeInstruction::is_illegal() {
   if (illegal_instruction_bits == 0) {
     return false;
   }
   return long_at(0) == illegal_instruction_bits;
 }
 void NativeGeneralJump::verify() {
   assert(((NativeInstruction *)this)->is_jump() ||
          ((NativeInstruction *)this)->is_cond_jump(), "not a general jump instruction");
 }
 void NativeGeneralJump::insert_unconditional(address code_pos, address entry) {
   Assembler::Condition condition = Assembler::always;
   int x = Assembler::op2(Assembler::br_op2) | Assembler::annul(false) |
     Assembler::cond(condition) | Assembler::wdisp((intptr_t)entry, (intptr_t)code_pos, 22);
   NativeGeneralJump* ni = (NativeGeneralJump*) nativeInstruction_at(code_pos);
   ni->set_long_at(0, x);
 }
 // MT-safe patching of a jmp instruction (and following word).
 // First patches the second word, and then atomicly replaces
 // the first word with the first new instruction word.
 // Other processors might briefly see the old first word
 // followed by the new second word.  This is OK if the old
 // second word is harmless, and the new second word may be
 // harmlessly executed in the delay slot of the call.
 void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) {
    assert(Patching_lock->is_locked() ||
          SafepointSynchronize::is_at_safepoint(), "concurrent code patching");
    assert (instr_addr != NULL, "illegal address for code patching");
    NativeGeneralJump* h_jump =  nativeGeneralJump_at (instr_addr); // checking that it is a call
    assert(NativeGeneralJump::instruction_size == 8, "wrong instruction size; must be 8");
    int i0 = ((int*)code_buffer)[0];
    int i1 = ((int*)code_buffer)[1];
    int* contention_addr = (int*) h_jump->addr_at(1*BytesPerInstWord);
    assert(inv_op(*contention_addr) == Assembler::arith_op ||
           *contention_addr == nop_instruction() || !VM_Version::v9_instructions_work(),
           "must not interfere with original call");
    // The set_long_at calls do the ICacheInvalidate so we just need to do them in reverse order
    h_jump->set_long_at(1*BytesPerInstWord, i1);
    h_jump->set_long_at(0*BytesPerInstWord, i0);
    // NOTE:  It is possible that another thread T will execute
    // only the second patched word.
    // In other words, since the original instruction is this
    //    jmp patching_stub; nop                    (NativeGeneralJump)
    // and the new sequence from the buffer is this:
    //    sethi %hi(K), %r; add %r, %lo(K), %r      (NativeMovConstReg)
    // what T will execute is this:
    //    jmp patching_stub; add %r, %lo(K), %r
    // thereby putting garbage into %r before calling the patching stub.
    // This is OK, because the patching stub ignores the value of %r.
    // Make sure the first-patched instruction, which may co-exist
    // briefly with the call, will do something harmless.
    assert(inv_op(*contention_addr) == Assembler::arith_op ||
           *contention_addr == nop_instruction() || !VM_Version::v9_instructions_work(),
           "must not interfere with original call");
 }

Mercurial > jdk8-mips64-public > hotspot / annotate

src/cpu/sparc/vm/nativeInst_sparc.cpp@9c2ecc2ffb12 (annotated)

src/cpu/sparc/vm/nativeInst_sparc.cpp