ohair@425: #
ohair@425: # Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
ohair@425: # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
ohair@425: #
ohair@425: # This code is free software; you can redistribute it and/or modify it
ohair@425: # under the terms of the GNU General Public License version 2 only, as
ohair@425: # published by the Free Software Foundation.  Oracle designates this
ohair@425: # particular file as subject to the "Classpath" exception as provided
ohair@425: # by Oracle in the LICENSE file that accompanied this code.
ohair@425: #
ohair@425: # This code is distributed in the hope that it will be useful, but WITHOUT
ohair@425: # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
ohair@425: # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
ohair@425: # version 2 for more details (a copy is included in the LICENSE file that
ohair@425: # accompanied this code).
ohair@425: #
ohair@425: # You should have received a copy of the GNU General Public License version
ohair@425: # 2 along with this work; if not, write to the Free Software Foundation,
ohair@425: # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
ohair@425: #
ohair@425: # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
ohair@425: # or visit www.oracle.com if you need additional information or have any
ohair@425: # questions.
ohair@425: #
ohair@425: 
ohair@425: ################################################################
ohair@425: #
ohair@425: # Check that GNU make and cygwin are recent enough.
ohair@425: # Setup common utility functions.
ohair@425: #
ohair@425: ################################################################
ohair@425: 
ohair@425: ifndef _MAKEBASE_GMK
ohair@425: _MAKEBASE_GMK := 1
ohair@425: 
ohair@425: # If the variable that you want to send to stdout for piping into a file or otherwise,
ohair@425: # is potentially long, for example the a list of file paths, eg a list of all package directories.
ohair@425: # Then you need to use ListPathsSafely, which optimistically splits the output into several shell
ohair@425: # calls as well as use compression on recurrent file paths segments, to get around the potential
ohair@425: # command line length problem that exists in cygwin and other shells.
ihse@912: compress_pre:=$(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-pre-compress.incl))
ihse@912: compress_post:=$(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-post-compress.incl))
ohair@425: compress_paths=$(compress_pre)\
ohair@425: $(subst $(SRC_ROOT),X97,\
ohair@425: $(subst $(OUTPUT_ROOT),X98,\
ohair@425: $(subst X,X00,\
ohair@425: $(subst $(SPACE),\n,$(strip $1)))))\
ohair@425: $(compress_post)
ohair@425: 
ihse@912: decompress_paths=$(SED) -f $(SRC_ROOT)/make/common/support/ListPathsSafely-uncompress.sed -e 's|X99|\\n|g' \
ihse@839:     -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
ihse@839:     -e 's|X00|X|g' | tr '\n' '$2'
ohair@425: 
ohair@425: define ListPathsSafely_If
ihse@839: 	$(if $(word $3,$($1)),$(eval $1_LPS$3:=$(call compress_paths,$(wordlist $3,$4,$($1)))))
ohair@425: endef
ohair@425: 
ohair@425: define ListPathsSafely_Printf
erikj@840: 	$(if $(strip $($1_LPS$4)),$(if $(findstring $(LOG_LEVEL),trace),,@)printf \
erikj@840: 	    -- "$(strip $($1_LPS$4))\n" | $(decompress_paths) $3)
ohair@425: endef
ohair@425: 
ohair@425: # Receipt example:
ihse@839: #   rm -f thepaths
ihse@839: #   $(call ListPathsSafely,THEPATHS,\n, >> thepaths)
ihse@839: # The \n argument means translate spaces into \n
ihse@839: # if instead , , (a space) is supplied, then spaces remain spaces.
ohair@425: define ListPathsSafely
ihse@839: 	$(if $(word 16001,$($1)),$(error Cannot list safely more than 16000 paths. $1 has $(words $($1)) paths!))
erikj@840: 	$(ECHO) $(LOG_DEBUG) Writing $(words $($1)) paths to '$3'
ihse@839: 	$(call ListPathsSafely_If,$1,$2,1,250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,251,500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,501,750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,751,1000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,1001,1250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,1251,1500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,1501,1750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,1751,2000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,2001,2250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,2251,2500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,2501,2750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,2751,3000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,3001,3250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,3251,3500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,3501,3750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,3751,4000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,4001,4250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,4251,4500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,4501,4750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,4751,5000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,5001,5250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,5251,5500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,5501,5750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,5751,6000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,6001,6250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,6251,6500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,6501,6750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,6751,7000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,7001,7250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,7251,7500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,7501,7750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,7751,8000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,8001,8250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,8251,8500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,8501,8750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,8751,9000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,9001,9250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,9251,9500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,9501,9750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,9751,10000)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,10001,10250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,10251,10500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,10501,10750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,10751,11000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,11001,11250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,11251,11500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,11501,11750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,11751,12000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,12001,12250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,12251,12500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,12501,12750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,12751,13000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,13001,13250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,13251,13500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,13501,13750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,13751,14000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,14001,14250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,14251,14500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,14501,14750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,14751,15000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_If,$1,$2,15001,15250)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,15251,15500)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,15501,15750)
ihse@839: 	$(call ListPathsSafely_If,$1,$2,15751,16000)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,1)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,1001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,1251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,1501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,1751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,2001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,2251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,2501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,2751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,3001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,3251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,3501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,3751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,4001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,4251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,4501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,4751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,5001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,5251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,5501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,5751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,6001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,6251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,6501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,6751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,7001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,7251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,7501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,7751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,8001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,8251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,8501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,8751)
ohair@425: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,9001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,9251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,9501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,9751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,10001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,10251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,10501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,10751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,11001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,11251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,11501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,11751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,12001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,12251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,12501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,12751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,13001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,13251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,13501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,13751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,14001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,14251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,14501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,14751)
erikj@501: 
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,15001)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,15251)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,15501)
ihse@839: 	$(call ListPathsSafely_Printf,$1,$2,$3,15751)
ohair@425: endef
ohair@425: 
ohair@425: define ListPathsSafelyNow_IfPrintf
ihse@839:   ifneq (,$$(word $4,$$($1)))
ihse@839:     $$(eval $1_LPS$4:=$$(call compress_paths,$$(wordlist $4,$5,$$($1))))
ihse@839:     $$(shell printf -- "$$(strip $$($1_LPS$4))\n" | $(decompress_paths) $3)
ihse@839:   endif
ohair@425: endef
ohair@425: 
ohair@425: # And an non-receipt version:
ohair@425: define ListPathsSafelyNow
ihse@839:   ifneq (,$$(word 10001,$$($1)))
ihse@839:     $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
ihse@839:   endif
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1,250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,251,500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,501,750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,751,1000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1001,1250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1251,1500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1501,1750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1751,2000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2001,2250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2251,2500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2501,2750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2751,3000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3001,3250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3251,3500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3501,3750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3751,4000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4001,4250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4251,4500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4501,4750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4751,5000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5001,5250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5251,5500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5501,5750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5751,6000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6001,6250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6251,6500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6501,6750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6751,7000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7001,7250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7251,7500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7501,7750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7751,8000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8001,8250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8251,8500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8501,8750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8751,9000)
ohair@425: 
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9001,9250)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9251,9500)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9501,9750)
ihse@839:   $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9751,10000)
ohair@425: 
ohair@425: endef
ohair@425: 
erikj@445: # The source tips can come from the Mercurial repository, or in the files
ihse@839: # $(HGTIP_FILENAME) which contains the tip but is also positioned in the same
ihse@839: # directory as the original $(HGDIR) directory.
ihse@839: # These should not be := assignments, only used from the root Makefile.
erikj@445: HG_VERSION = $(shell $(HG) version 2> /dev/null)
erikj@445: HG_DIRECTORY=.hg
erikj@445: HGTIP_FILENAME=.hgtip
erikj@445: HG_SEARCH = ./REPO ./*/REPO ./*/*/REPO ./*/*/*/REPO
erikj@445: REPO_LIST = $(patsubst ./%,%,$(patsubst %/,%,$(sort $(dir \
erikj@445:     $(shell $(CD) $(SRC_ROOT) ; ( $(LS) -d $(HG_SEARCH:%/REPO=%/$(HG_DIRECTORY)) ; \
ihse@839:         $(LS) $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) ) \
ihse@839:         2> /dev/null)))))
erikj@445: 
erikj@445: # Emit the repo:tip pairs to $@
erikj@445: define GetSourceTips
ihse@839: 	$(CD) $(SRC_ROOT) ; \
ihse@839: 	for i in $(REPO_LIST) IGNORE ; do \
ihse@839: 	  if [ "$${i}" = "IGNORE" ] ; then \
ihse@839: 	    continue; \
ihse@839: 	  elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \
ihse@839: 	    $(PRINTF) " %s:%s" \
ihse@839: 	        "$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \
ihse@839: 	  elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \
ihse@839: 	    $(PRINTF) " %s:%s" \
ihse@839: 	        "$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \
ihse@839: 	  fi; \
ihse@839: 	done >> $@
ihse@839: 	$(PRINTF) "\n" >> $@
erikj@445: endef
erikj@445: 
erikj@445: # Create the HGTIP_FILENAME file. Called from jdk/make/closed/bundles.gmk
erikj@445: define CreateHgTip
ihse@839: 	$(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME); \
ihse@839: 	$(ECHO) $1/$(HGTIP_FILENAME)
erikj@445: endef
erikj@445: 
erikj@445: define SetupLogging
ihse@839:   ifeq ($$(LOG_LEVEL),trace)
ihse@839:     # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
ihse@839:     # For each target executed, will print
ihse@839:     # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
ihse@839:     # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
ihse@839:     # (and causing a crash on Cygwin).
ihse@839:     # Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
ihse@839:     # Only use time if it's GNU time which supports format and output file.
ihse@839:     WRAPPER_SHELL:=/bin/bash $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log /bin/bash
ihse@839:     SHELL=$$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
ihse@839:   endif
ihse@839:   # Never remove warning messages; this is just for completeness
ihse@839:   LOG_WARN=
ihse@839:   ifneq ($$(findstring $$(LOG_LEVEL),info debug trace),)
ihse@839:     LOG_INFO=
ihse@839:   else
ihse@839:     LOG_INFO=> /dev/null
ihse@839:   endif
ihse@839:   ifneq ($$(findstring $$(LOG_LEVEL),debug trace),)
ihse@839:     LOG_DEBUG=
ihse@839:   else
ihse@839:     LOG_DEBUG=> /dev/null
ihse@839:   endif
ihse@839:   ifneq ($$(findstring $$(LOG_LEVEL),trace),)
ihse@839:     LOG_TRACE=
ihse@839:   else
ihse@839:     LOG_TRACE=> /dev/null
ihse@839:   endif
erikj@445: endef
erikj@445: 
erikj@445: # Make sure logging is setup for everyone that includes MakeBase.gmk.
erikj@445: $(eval $(call SetupLogging))
erikj@445: 
ohair@494: # This is to be called by all SetupFoo macros
ohair@494: define LogSetupMacroEntry
ihse@839:   $(if $(27),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
ihse@839:   $(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
ohair@494: endef
ohair@494: 
ohair@494: # Make directory without forking mkdir if not needed
ohair@494: define MakeDir
ihse@839:   ifneq ($$(wildcard $1 $2 $3 $4 $5 $6 $7 $8 $9),$$(strip $1 $2 $3 $4 $5 $6 $7 $8 $9))
ihse@839:     $$(shell $(MKDIR) -p $1 $2 $3 $4 $5 $6 $7 $8 $9)
ihse@839:   endif
ohair@494: endef
ohair@494: 
ohair@494: ifeq ($(OPENJDK_TARGET_OS),solaris)
ihse@839:   # On Solaris, if the target is a symlink and exists, cp won't overwrite.
ihse@839:   # Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the
ihse@839:   # name of the target file differs from the source file, rename after copy.
ihse@839:   define install-file
ohair@494: 	$(MKDIR) -p $(@D)
ohair@494: 	$(RM) '$@'
ohair@494: 	$(CP) -f -r -P '$<' '$(@D)'
erikj@670: 	if [ "$(@F)" != "$(<F)" ]; then $(MV) '$(@D)/$(<F)' '$@'; fi
ihse@839:   endef
ohair@494: else ifeq ($(OPENJDK_TARGET_OS),macosx)
ihse@839:   # On mac, extended attributes sometimes creep into the source files, which may later
ihse@839:   # cause the creation of ._* files which confuses testing. Clear these with xattr if
ihse@839:   # set. Some files get their write permissions removed after being copied to the
ihse@839:   # output dir. When these are copied again to images, xattr would fail. By only clearing
ihse@839:   # attributes when they are present, failing on this is avoided.
ihse@839:   define install-file
ohair@494: 	$(MKDIR) -p $(@D)
erikj@670: 	$(CP) -fRP '$<' '$@'
erikj@670: 	if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi
ihse@839:   endef
ohair@494: else
ihse@839:   define install-file
ohair@494: 	$(MKDIR) -p $(@D)
ohair@494: 	$(CP) -fP '$<' '$@'
ihse@839:   endef
ohair@494: endif
ohair@494: 
erikj@557: # Convenience functions for working around make's limitations with $(filter ).
erikj@557: containing = $(foreach v,$2,$(if $(findstring $1,$v),$v))
erikj@557: not-containing = $(foreach v,$2,$(if $(findstring $1,$v),,$v))
erikj@557: 
erikj@557: ################################################################################
erikj@557: # In Cygwin, finds are very costly, both because of expensive forks and because
erikj@557: # of bad file system caching. Find is used extensively in $(shell) commands to
ihse@839: # find source files. This makes rerunning make with no or few changes rather
erikj@557: # expensive. To speed this up, these two macros are used to cache the results
erikj@557: # of simple find commands for reuse.
ihse@839: #
erikj@557: # Runs a find and stores both the directories where it was run and the results.
erikj@557: # This macro can be called multiple times to add to the cache. Only finds files
erikj@557: # with no filters.
erikj@557: #
erikj@557: # Needs to be called with $(eval )
ihse@839: #
erikj@557: # Param 1 - Dir to find in
erikj@557: ifeq ($(OPENJDK_BUILD_OS),windows)
ihse@839:   define FillCacheFind
erikj@557:     FIND_CACHE_DIR += $1
erikj@557:     FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $1 -type f -o -type l))
ihse@839:   endef
erikj@557: else
ihse@839:   define FillCacheFind
ihse@839:   endef
erikj@557: endif
erikj@557: 
erikj@557: # Mimics find by looking in the cache if all of the directories have been cached.
erikj@557: # Otherwise reverts to shell find. This is safe to call on all platforms, even if
erikj@557: # cache is deactivated.
erikj@557: #
erikj@557: # The extra - is needed when FIND_CACHE_DIR is empty but should be harmless.
erikj@557: # Param 1 - Dirs to find in
erikj@557: define CacheFind
ihse@839:   $(if $(filter-out $(addsuffix %,- $(FIND_CACHE_DIR)),$1), \
ihse@839:     $(shell $(FIND) $1 -type f -o -type l), \
ihse@839:     $(filter $(addsuffix %,$1),$(FIND_CACHE)))
erikj@557: endef
erikj@557: 
erikj@557: ################################################################################
erikj@557: 
kevinw@2223: define AddFileToCopy
kevinw@2223:   # Helper macro for SetupCopyFiles
kevinw@2223:   # 1 : Source file
kevinw@2223:   # 2 : Dest file
kevinw@2223:   # 3 : Variable to add targets to
kevinw@2223:   # 4 : Macro to call for copy operation
kevinw@2223:   $2: $1
kevinw@2223: 	$(ECHO) $(LOG_INFO) Copying $$(patsubst $(OUTPUT_ROOT)/%,%,$$@)
kevinw@2223: 	$$($$(strip $4))
kevinw@2223: 
kevinw@2223:   $3 += $2
kevinw@2223: endef
kevinw@2223: 
kevinw@2223: define SetupCopyFiles
kevinw@2223:   # param 1 is for example COPY_MYFILES
kevinw@2223:   # param 2,3,4,5 are named args.
kevinw@2223:   #   SRC     : Source root dir (defaults to dir of first file)
kevinw@2223:   #   DEST    : Dest root dir
kevinw@2223:   #   FILES   : List of files to copy with absolute paths, or path relative to SRC.
kevinw@2223:   #             Must be in SRC.
kevinw@2223:   #   FLATTEN : Set to flatten the directory structure in the DEST dir.
kevinw@2223:   #   MACRO   : Optionally override the default macro used for making the copy.
kevinw@2223:   #             Default is 'install-file'
kevinw@2223:   $(foreach i,2 3 4 5 6, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
kevinw@2223:   $(call LogSetupMacroEntry,SetupCopyFiles($1),$2,$3,$4,$5,$6)
kevinw@2223:   $(if $(7),$(error Internal makefile error: Too many arguments to SetupCopyFiles))
kevinw@2223: 
kevinw@2223:   ifeq ($$($1_MACRO), )
kevinw@2223:     $1_MACRO := install-file
kevinw@2223:   endif
kevinw@2223: 
kevinw@2223:   # Default SRC to the dir of the first file.
kevinw@2223:   ifeq ($$($1_SRC), )
kevinw@2223:     $1_SRC := $$(dir $$(firstword $$($1_FILES)))
kevinw@2223:   endif
kevinw@2223: 
kevinw@2223:   # Remove any trailing slash from SRC
kevinw@2223:   $1_SRC := $$(patsubst %/,%,$$($1_SRC))
kevinw@2223: 
kevinw@2223:   $$(foreach f, $$(patsubst $$($1_SRC)/%,%,$$($1_FILES)), \
kevinw@2223:       $$(eval $$(call AddFileToCopy, $$($1_SRC)/$$f, \
kevinw@2223:       $$($1_DEST)/$$(if $$($1_FLATTEN),$$(notdir $$f),$$f), $1, $$($1_MACRO))))
kevinw@2223: 
kevinw@2223: endef
kevinw@2223: 
kevinw@2223: ################################################################################
kevinw@2223: 
ohair@425: endif # _MAKEBASE_GMK