jlaskey@3: #!/bin/bash
jlaskey@3: #
jlaskey@7: # Copyright (c) 2010, 2013, Oracle and/or its affiliates. All rights reserved.
jlaskey@3: # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
jlaskey@3: # 
jlaskey@3: # This code is free software; you can redistribute it and/or modify it
jlaskey@3: # under the terms of the GNU General Public License version 2 only, as
jlaskey@3: # published by the Free Software Foundation.
jlaskey@3: # 
jlaskey@3: # This code is distributed in the hope that it will be useful, but WITHOUT
jlaskey@3: # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
jlaskey@3: # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
jlaskey@3: # version 2 for more details (a copy is included in the LICENSE file that
jlaskey@3: # accompanied this code).
jlaskey@3: # 
jlaskey@3: # You should have received a copy of the GNU General Public License version
jlaskey@3: # 2 along with this work; if not, write to the Free Software Foundation,
jlaskey@3: # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
jlaskey@3: # 
jlaskey@3: # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
jlaskey@3: # or visit www.oracle.com if you need additional information or have any
jlaskey@3: # questions.
jlaskey@3: #
jlaskey@3: 
jlaskey@3: #best pass rate at test 262 known
jlaskey@3: TEST262_PASS_AT_LEAST=435
jlaskey@3: 
jlaskey@3: RUN_TEST="true"
jlaskey@3: RUN_TEST262="true"
jlaskey@3: RUN_NODE="true"
jlaskey@3: KEEP_OUTPUT="true"
jlaskey@3: CLEAN_AND_BUILD_NASHORN="true"
jlaskey@3: 
jlaskey@3: #the stable node version to sync against
jlaskey@3: NODE_LAST_STABLE=v0.6.18
jlaskey@3: 
jlaskey@3: #parse args
jlaskey@3: for arg in $*
jlaskey@3: do
jlaskey@3:     if [ $arg = "--no-test" ]; then
jlaskey@3: 	RUN_TEST="false"
jlaskey@3: 	echo "**** WARNING - you have disabled 'ant test', which is a minimum checkin requirement..."
jlaskey@3:     elif [ $arg = "--no-262" ]; then
jlaskey@3: 	RUN_TEST262="false"
jlaskey@3:     elif [ $arg = "--no-node" ]; then
jlaskey@3: 	RUN_NODE="false"
jlaskey@3:     elif [ $arg = "--no-build" ]; then
jlaskey@3: 	CLEAN_AND_BUILD_NASHORN="false"
jlaskey@3:     elif [ $arg = "--no-logs" ]; then
jlaskey@3: 	KEEP_OUTPUT="false"
jlaskey@3:     fi
jlaskey@3: done
jlaskey@3: 
jlaskey@3: function lastpart() {        
jlaskey@3:     arr=$(echo $1 | tr "/" "\n")
jlaskey@3:     for x in $arr
jlaskey@3:     do
jlaskey@3: 	_last=$x
jlaskey@3:     done
jlaskey@3:     echo $_last
jlaskey@3: }
jlaskey@3: 
jlaskey@3: function check_installed() {
jlaskey@3:     which $1 >/dev/null
jlaskey@3:     if [ $? -ne 0 ]; then
jlaskey@3: 	echo "Error $1 not installed: $?"
jlaskey@3: 	exit 2
jlaskey@3:     fi
jlaskey@3: }
jlaskey@3: 
jlaskey@3: check_installed hg
jlaskey@3: check_installed git
jlaskey@3: check_installed mv
jlaskey@3: check_installed git
jlaskey@3: 
jlaskey@3: PWD=$(pwd);
jlaskey@3: 
jlaskey@3: while [ -z $NASHORN_ROOT ]
jlaskey@3: do
jlaskey@3:     if [ -e $PWD/.hg ]; then
jlaskey@3: 	NASHORN_ROOT=${PWD}
jlaskey@3: 	break
jlaskey@3:     fi
jlaskey@3:     PWD=$(dirname ${PWD})
jlaskey@3: done
jlaskey@3: 
jlaskey@3: echo "Nashorn root detected at ${NASHORN_ROOT}"
jlaskey@3: 
jlaskey@3: COMMON_ROOT=$(dirname $NASHORN_ROOT)
jlaskey@3: echo "Common root is ${COMMON_ROOT}"
jlaskey@3: 
jlaskey@3: echo "Running checkintest..."
jlaskey@3: 
jlaskey@3: ABSOLUTE_NASHORN_HOME=$COMMON_ROOT/$(lastpart $NASHORN_ROOT)
jlaskey@3: 
jlaskey@3: if [ $CLEAN_AND_BUILD_NASHORN != "false" ]; then
jlaskey@3:     echo "Cleaning and building nashorn at $ABSOLUTE_NASHORN_HOME/nashorn..."
jlaskey@3:     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant clean >/dev/null 2>/dev/null)
jlaskey@3:     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant jar >/dev/null 2>/dev/null)
jlaskey@3:     echo "Done."
jlaskey@3: fi
jlaskey@3: 
jlaskey@3: function failure_check() {
jlaskey@3:     while read line
jlaskey@3:     do
jlaskey@3: 	LINE=$(echo $line | grep "Tests run")    
jlaskey@3: 	if [ "${LINE}" != "" ]; then
jlaskey@3: 	    RESULT=$(echo $line | grep "Failures: 0" | grep "Errors: 0")
jlaskey@3: 	    if [ "${RESULT}" == "" ]; then
jlaskey@3: 		TESTNAME=$2
jlaskey@3: 		echo "There were errors in ${TESTNAME} : ${LINE}"
jlaskey@3: 		exit 1
jlaskey@3: 	    fi
jlaskey@3: 	fi
jlaskey@3:     done < $1
jlaskey@3: }
jlaskey@3: 
jlaskey@3: function test() {
jlaskey@3:     TEST_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)
jlaskey@3:     echo "Running 'ant test' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..."
jlaskey@3:     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test >$TEST_OUTPUT)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     failure_check $TEST_OUTPUT
jlaskey@3: 
jlaskey@3:     echo "**** SUCCESS: 'ant test' successful"
jlaskey@3: 
jlaskey@3:     if [ $KEEP_OUTPUT == "true" ]; then
jlaskey@3: 	cp $TEST_OUTPUT ./checkintest.test.log
jlaskey@3: 	rm -fr $TEST_OUTPUT
jlaskey@3:     fi
jlaskey@3: }
jlaskey@3: 
jlaskey@3: if [ $RUN_TEST != "false" ]; then
jlaskey@3:     test;
jlaskey@3: fi
jlaskey@3: 
jlaskey@3: function test262() {
jlaskey@3: 
jlaskey@3:     echo "Running 'ant test262parallel' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..."
jlaskey@3:     TEST262_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)
jlaskey@3: 
jlaskey@3:     echo "Looking for ${ABSOLUTE_NASHORN_HOME}/test/test262..."
jlaskey@3: 
jlaskey@3:     if [ ! -e $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 ]; then
jlaskey@3: 	echo "test262 is missing... looking in $COMMON_ROOT..."
jlaskey@3: 	if [ ! -e $COMMON_ROOT/test262 ]; then
jlaskey@3: 	    echo "... not there either... cloning from repo..."
jlaskey@3: 	    hg clone http://hg.ecmascript.org/tests/test262 $COMMON_ROOT/test262 >/dev/null 2>/dev/null
jlaskey@3: 	    echo "Done."
jlaskey@3: 	fi
jlaskey@3: 	echo "Adding soft link ${COMMON_ROOT}/test262 -> ${ABSOLUTE_NASHORN_HOME}/test/test262..."
jlaskey@3: 	ln -s $COMMON_ROOT/test262 $ABSOLUTE_NASHORN_HOME/nashorn/test/test262
jlaskey@3: 	echo "Done."
jlaskey@3:     fi
jlaskey@3: 
jlaskey@3:     echo "Ensuring test262 is up to date..."
jlaskey@3:     $(cd $ABSOLUTE_NASHORN_HOME/nashorn/test/test262; hg pull -u >/dev/null 2>/dev/null)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     echo "Running test262..."
jlaskey@3:     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test262parallel > $TEST262_OUTPUT)
jlaskey@3:     
jlaskey@3:     FAILED=$(cat $TEST262_OUTPUT|grep "Tests run:"| cut -d ' ' -f 15 |tr -cd '"[[:digit:]]')
jlaskey@3:     if [ $FAILED -gt $TEST262_PASS_AT_LEAST ]; then 
jlaskey@3: 	echo "FAILURE: There are ${FAILED} failures in test262 and can be no more than ${TEST262_PASS_AT_LEAST}"
jlaskey@3: 	cp $TEST262_OUTPUT ./checkintest.test262.log
jlaskey@3: 	echo "See ./checkintest.test262.log"
jlaskey@3: 	echo "Terminating due to error"
jlaskey@3: 	exit 1
jlaskey@3:     elif [ $FAILED -lt $TEST262_PASS_AT_LEAST ]; then
jlaskey@3: 	echo "There seem to have been fixes to 262. ${FAILED} < ${TEST262_PASS_AT_LEAST}. Please update limit in bin/checkintest.sh"
jlaskey@3:     fi
jlaskey@3:     
jlaskey@3:     echo "**** SUCCESS: Test262 passed with no more than ${TEST262_PASS_AT_LEAST} failures."
jlaskey@3: 
jlaskey@3:     if [ $KEEP_OUTPUT == "true" ]; then
jlaskey@3: 	cp $TEST262_OUTPUT ./checkintest.test262.log
jlaskey@3: 	rm -fr $TEST262_OUTPUT
jlaskey@3:     fi    
jlaskey@3: }
jlaskey@3: 
jlaskey@3: if [ $RUN_TEST262 != "false" ]; then
jlaskey@3:     test262;    
jlaskey@3: fi;
jlaskey@3: 
jlaskey@3: function testnode() {
jlaskey@3:     TESTNODEJAR_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)
jlaskey@3:    
jlaskey@3:     echo "Running node tests..."
jlaskey@3: #replace node jar properties nashorn with this nashorn
jlaskey@3:     
jlaskey@3:     NODEJAR_PROPERTIES=~/nodejar.properties
jlaskey@3:     
jlaskey@3:     NODE_HOME=$(cat $NODEJAR_PROPERTIES | grep ^node.home | cut -f2 -d=)    
jlaskey@3:     NASHORN_HOME=$(cat $NODEJAR_PROPERTIES | grep ^nashorn.home | cut -f2 -d=)
jlaskey@3:     
jlaskey@3:     ABSOLUTE_NODE_HOME=$COMMON_ROOT/$(lastpart $NODE_HOME)    
jlaskey@3:     
jlaskey@3:     echo "Writing nodejar.properties..."
jlaskey@3: 
jlaskey@3:     cat > $NODEJAR_PROPERTIES << EOF
jlaskey@3: node.home=../node
jlaskey@3: nashorn.home=../$(lastpart $NASHORN_ROOT)
jlaskey@3: EOF
jlaskey@3:     echo "Done."
jlaskey@3:     echo "Checking node home ${ABSOLUTE_NODE_HOME}..."
jlaskey@3: 
jlaskey@3:     if [ ! -e $ABSOLUTE_NODE_HOME ]; then
jlaskey@3: 	echo "Node base dir not found. Cloning node..."    
jlaskey@3: 	$(cd $COMMON_ROOT; git clone https://github.com/joyent/node.git $(lastpart $NODE_HOME) >/dev/null 2>/dev/null)
jlaskey@3: 	echo "Done."
jlaskey@3: 	echo "Updating to last stable version ${NODE_LAST_STABLE}..."
jlaskey@3: 	$(cd $ABSOLUTE_NODE_HOME; git checkout $NODE_LAST_STABLE >/dev/null 2>/dev/null)
jlaskey@3: 	echo "Done."
jlaskey@3: 	echo "Running configure..."
jlaskey@3: 	$(cd $ABSOLUTE_NODE_HOME; ./configure >/dev/null 2>/dev/null)
jlaskey@3: 	echo "Done."
jlaskey@3:     fi
jlaskey@3:     
jlaskey@3:     echo "Ensuring node is built..."
jlaskey@3: #make sure node is built
jlaskey@3:     $(cd $ABSOLUTE_NODE_HOME; make >/dev/null 2>/dev/null)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     NODEJAR_HOME=$COMMON_ROOT/nodejar
jlaskey@3: 
jlaskey@3:     if [ ! -e $NODEJAR_HOME ]; then
jlaskey@3: 	echo "No node jar home found. cloning from depot..."
jlaskey@3: 	$(cd $COMMON_ROOT; hg clone https://hg.kenai.com/hg/nodejs~source nodejar >/dev/null 2>/dev/null) 
jlaskey@3: 	$(cd $COMMON_ROOT/nodejar; ant >/dev/null)
jlaskey@3: 	echo "Done."
jlaskey@3: 	echo "Copying node files..."
jlaskey@3: 	$(cd $COMMON_ROOT/nodejar; ant copy-node-files >/dev/null 2>/dev/null)
jlaskey@3: 	echo "Patching node files..."
jlaskey@3: 	$(cd $COMMON_ROOT/nodejar; ant patch-node-files >/dev/null 2>/dev/null)
jlaskey@3: 	echo "Done."
jlaskey@3:     fi
jlaskey@3:     
jlaskey@3:     echo "Ensuring node.jar is up to date from source depot..."
jlaskey@3:     $(cd $COMMON_ROOT/nodejar; hg pull -u >/dev/null 2>/dev/null)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     echo "Installing nashorn..."
jlaskey@3:     $(cd $COMMON_ROOT/nodejar; ant >/dev/null)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     echo "Running node.jar test..."
jlaskey@3:     $(cd $COMMON_ROOT/nodejar; mvn clean verify >$TESTNODEJAR_OUTPUT)
jlaskey@3:     echo "Done."
jlaskey@3: 
jlaskey@3:     failure_check $TESTNODEJAR_OUTPUT
jlaskey@3:     
jlaskey@3:     echo "**** SUCCESS: Node test successful."
jlaskey@3: 
jlaskey@3:     if [ $KEEP_OUTPUT == "true" ]; then
jlaskey@3: 	rm -fr $TESTNODEJAR_OUTPUT
jlaskey@3: 	cp $TESTNODEJAR_OUTPUT ./checkintest.nodejar.log
jlaskey@3:     fi
jlaskey@3: }
jlaskey@3: 
jlaskey@3: if [ $RUN_NODE != "false" ]; then
jlaskey@3:     testnode;
jlaskey@3: fi;
jlaskey@3: 
jlaskey@3: echo "Finished"