Mercurial > jdk8-mips64-public > nashorn / file revision

 /*

  * Copyright (c) 2010, 2013, Oracle and/or its affiliates. All rights reserved.

  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

  *

  * This code is free software; you can redistribute it and/or modify it

  * under the terms of the GNU General Public License version 2 only, as

  * published by the Free Software Foundation.  Oracle designates this

  * particular file as subject to the "Classpath" exception as provided

  * by Oracle in the LICENSE file that accompanied this code.

  *

  * This code is distributed in the hope that it will be useful, but WITHOUT

  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

  * version 2 for more details (a copy is included in the LICENSE file that

  * accompanied this code).

  *

  * You should have received a copy of the GNU General Public License version

  * 2 along with this work; if not, write to the Free Software Foundation,

  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

  *

  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

  * or visit www.oracle.com if you need additional information or have any

  * questions.

  */

 /*

  * This file is available under and governed by the GNU General Public

  * License version 2 only, as published by the Free Software Foundation.

  * However, the following notice accompanied the original version of this

  * file, and Oracle licenses the original version of this file under the BSD

  * license:

  */

 /*

    Copyright 2009-2013 Attila Szegedi

    Licensed under both the Apache License, Version 2.0 (the "Apache License")

    and the BSD License (the "BSD License"), with licensee being free to

    choose either of the two at their discretion.

    You may not use this file except in compliance with either the Apache

    License or the BSD License.

    If you choose to use this file in compliance with the Apache License, the

    following notice applies to you:

        You may obtain a copy of the Apache License at

            http://www.apache.org/licenses/LICENSE-2.0

        Unless required by applicable law or agreed to in writing, software

        distributed under the License is distributed on an "AS IS" BASIS,

        WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or

        implied. See the License for the specific language governing

        permissions and limitations under the License.

    If you choose to use this file in compliance with the BSD License, the

    following notice applies to you:

        Redistribution and use in source and binary forms, with or without

        modification, are permitted provided that the following conditions are

        met:

        * Redistributions of source code must retain the above copyright

          notice, this list of conditions and the following disclaimer.

        * Redistributions in binary form must reproduce the above copyright

          notice, this list of conditions and the following disclaimer in the

          documentation and/or other materials provided with the distribution.

        * Neither the name of the copyright holder nor the names of

          contributors may be used to endorse or promote products derived from

          this software without specific prior written permission.

        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS

        IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

        TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

        PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER

        BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

        CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

        SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

        BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

        WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

        OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

        ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */

 package jdk.internal.dynalink;

 import java.lang.invoke.MethodHandle;

 import java.lang.invoke.MethodHandles;

 import java.lang.invoke.MethodType;

 import java.lang.invoke.MutableCallSite;

 import java.util.List;

 import java.util.Objects;

 import jdk.internal.dynalink.linker.GuardedInvocation;

 import jdk.internal.dynalink.linker.GuardingDynamicLinker;

 import jdk.internal.dynalink.linker.LinkRequest;

 import jdk.internal.dynalink.linker.LinkerServices;

 import jdk.internal.dynalink.support.CallSiteDescriptorFactory;

 import jdk.internal.dynalink.support.LinkRequestImpl;

 import jdk.internal.dynalink.support.Lookup;

 import jdk.internal.dynalink.support.RuntimeContextLinkRequestImpl;

 /**

  * The linker for {@link RelinkableCallSite} objects. Users of it (scripting frameworks and language runtimes) have to

  * create a linker using the {@link DynamicLinkerFactory} and invoke its link method from the invokedynamic bootstrap

  * methods to set the target of all the call sites in the code they generate. Usual usage would be to create one class

  * per language runtime to contain one linker instance as:

  *

  * <pre>

  * class MyLanguageRuntime {

  *     private static final GuardingDynamicLinker myLanguageLinker = new MyLanguageLinker();

  *     private static final DynamicLinker dynamicLinker = createDynamicLinker();

  *

  *     private static DynamicLinker createDynamicLinker() {

  *         final DynamicLinkerFactory factory = new DynamicLinkerFactory();

  *         factory.setPrioritizedLinker(myLanguageLinker);

  *         return factory.createLinker();

  *     }

  *

  *     public static CallSite bootstrap(MethodHandles.Lookup caller, String name, MethodType type) {

  *         return dynamicLinker.link(new MonomorphicCallSite(CallSiteDescriptorFactory.create(lookup, name, type)));

  *     }

  * }

  * </pre>

  *

  * Note how there are three components you will need to provide here:

  * <ul>

  * <li>You're expected to provide a {@link GuardingDynamicLinker} for your own language. If your runtime doesn't

  * have its own language and/or object model (i.e. it's a generic scripting shell), you don't need to implement a

  * dynamic linker; you would simply not invoke the {@code setPrioritizedLinker} method on the factory, or even better,

  * simply use {@link DefaultBootstrapper}.</li>

  * <li>The performance of the programs can depend on your choice of the class to represent call sites. The above

  * example used {@link MonomorphicCallSite}, but you might want to use {@link ChainedCallSite} instead. You'll need to

  * experiment and decide what fits your language runtime the best. You can subclass either of these or roll your own if

  * you need to.</li>

  * <li>You also need to provide {@link CallSiteDescriptor}s to your call sites. They are immutable objects that contain

  * all the information about the call site: the class performing the lookups, the name of the method being invoked, and

  * the method signature. The library has a default {@link CallSiteDescriptorFactory} for descriptors that you can use,

  * or you can create your own descriptor classes, especially if you need to add further information (values passed in

  * additional parameters to the bootstrap method) to them.</li>

  * </ul>

  *

  * @author Attila Szegedi

  */

 public class DynamicLinker {

     private static final String CLASS_NAME = DynamicLinker.class.getName();

     private static final String RELINK_METHOD_NAME = "relink";

     private static final String INITIAL_LINK_CLASS_NAME = "java.lang.invoke.MethodHandleNatives";

     private static final String INITIAL_LINK_METHOD_NAME = "linkCallSite";

     private final LinkerServices linkerServices;

     private final GuardedInvocationFilter prelinkFilter;

     private final int runtimeContextArgCount;

     private final boolean syncOnRelink;

     private final int unstableRelinkThreshold;

     /**

      * Creates a new dynamic linker.

      *

      * @param linkerServices the linkerServices used by the linker, created by the factory.

      * @param prelinkFilter see {@link DynamicLinkerFactory#setPrelinkFilter(GuardedInvocationFilter)}

      * @param runtimeContextArgCount see {@link DynamicLinkerFactory#setRuntimeContextArgCount(int)}

      */

     DynamicLinker(final LinkerServices linkerServices, final GuardedInvocationFilter prelinkFilter, final int runtimeContextArgCount,

             final boolean syncOnRelink, final int unstableRelinkThreshold) {

         if(runtimeContextArgCount < 0) {

             throw new IllegalArgumentException("runtimeContextArgCount < 0");

         }

         if(unstableRelinkThreshold < 0) {

             throw new IllegalArgumentException("unstableRelinkThreshold < 0");

         }

         this.linkerServices = linkerServices;

         this.prelinkFilter = prelinkFilter;

         this.runtimeContextArgCount = runtimeContextArgCount;

         this.syncOnRelink = syncOnRelink;

         this.unstableRelinkThreshold = unstableRelinkThreshold;

     }

     /**

      * Links an invokedynamic call site. It will install a method handle into the call site that invokes the relinking

      * mechanism of this linker. Next time the call site is invoked, it will be linked for the actual arguments it was

      * invoked with.

      *

      * @param callSite the call site to link.

      * @return the callSite, for easy call chaining.

      */

     public <T extends RelinkableCallSite> T link(final T callSite) {

         callSite.initialize(createRelinkAndInvokeMethod(callSite, 0));

         return callSite;

     }

     /**

      * Returns the object representing the lower level linker services of this class that are normally exposed to

      * individual language-specific linkers. While as a user of this class you normally only care about the

      * {@link #link(RelinkableCallSite)} method, in certain circumstances you might want to use the lower level services

      * directly; either to lookup specific method handles, to access the type converters, and so on.

      * @return the object representing the linker services of this class.

      */

     public LinkerServices getLinkerServices() {

         return linkerServices;

     }

     private static final MethodHandle RELINK = Lookup.findOwnSpecial(MethodHandles.lookup(), RELINK_METHOD_NAME,

             MethodHandle.class, RelinkableCallSite.class, int.class, Object[].class);

     private MethodHandle createRelinkAndInvokeMethod(final RelinkableCallSite callSite, final int relinkCount) {

         // Make a bound MH of invoke() for this linker and call site

         final MethodHandle boundRelinker = MethodHandles.insertArguments(RELINK, 0, this, callSite, Integer.valueOf(

                 relinkCount));

         // Make a MH that gathers all arguments to the invocation into an Object[]

         final MethodType type = callSite.getDescriptor().getMethodType();

         final MethodHandle collectingRelinker = boundRelinker.asCollector(Object[].class, type.parameterCount());

         return MethodHandles.foldArguments(MethodHandles.exactInvoker(type), collectingRelinker.asType(

                 type.changeReturnType(MethodHandle.class)));

     }

     /**

      * Relinks a call site conforming to the invocation arguments.

      *

      * @param callSite the call site itself

      * @param arguments arguments to the invocation

      * @return return the method handle for the invocation

      * @throws Exception rethrows any exception thrown by the linkers

      */

     @SuppressWarnings("unused")

     private MethodHandle relink(final RelinkableCallSite callSite, final int relinkCount, final Object... arguments) throws Exception {

         final CallSiteDescriptor callSiteDescriptor = callSite.getDescriptor();

         final boolean unstableDetectionEnabled = unstableRelinkThreshold > 0;

         final boolean callSiteUnstable = unstableDetectionEnabled && relinkCount >= unstableRelinkThreshold;

         final LinkRequest linkRequest =

                 runtimeContextArgCount == 0 ?

                         new LinkRequestImpl(callSiteDescriptor, callSite, relinkCount, callSiteUnstable, arguments) :

                         new RuntimeContextLinkRequestImpl(callSiteDescriptor, callSite, relinkCount, callSiteUnstable, arguments, runtimeContextArgCount);

         GuardedInvocation guardedInvocation = linkerServices.getGuardedInvocation(linkRequest);

         // None found - throw an exception

         if(guardedInvocation == null) {

             throw new NoSuchDynamicMethodException(callSiteDescriptor.toString());

         }

         // If our call sites have a runtime context, and the linker produced a context-stripped invocation, adapt the

         // produced invocation into contextual invocation (by dropping the context...)

         if(runtimeContextArgCount > 0) {

             final MethodType origType = callSiteDescriptor.getMethodType();

             final MethodHandle invocation = guardedInvocation.getInvocation();

             if(invocation.type().parameterCount() == origType.parameterCount() - runtimeContextArgCount) {

                 final List<Class<?>> prefix = origType.parameterList().subList(1, runtimeContextArgCount + 1);

                 final MethodHandle guard = guardedInvocation.getGuard();

                 guardedInvocation = guardedInvocation.dropArguments(1, prefix);

             }

         }

         // Make sure we filter the invocation before linking it into the call site. This is typically used to match the

         // return type of the invocation to the call site.

         guardedInvocation = prelinkFilter.filter(guardedInvocation, linkRequest, linkerServices);

         Objects.requireNonNull(guardedInvocation);

         int newRelinkCount = relinkCount;

         // Note that the short-circuited "&&" evaluation below ensures we'll increment the relinkCount until

         // threshold + 1 but not beyond that. Threshold + 1 is treated as a special value to signal that resetAndRelink

         // has already executed once for the unstable call site; we only want the call site to throw away its current

         // linkage once, when it transitions to unstable.

         if(unstableDetectionEnabled && newRelinkCount <= unstableRelinkThreshold && newRelinkCount++ == unstableRelinkThreshold) {

             callSite.resetAndRelink(guardedInvocation, createRelinkAndInvokeMethod(callSite, newRelinkCount));

         } else {

             callSite.relink(guardedInvocation, createRelinkAndInvokeMethod(callSite, newRelinkCount));

         }

         if(syncOnRelink) {

             MutableCallSite.syncAll(new MutableCallSite[] { (MutableCallSite)callSite });

         }

         return guardedInvocation.getInvocation();

     }

     /**

      * Returns a stack trace element describing the location of the call site currently being linked on the current

      * thread. The operation internally creates a Throwable object and inspects its stack trace, so it's potentially

      * expensive. The recommended usage for it is in writing diagnostics code.

      * @return a stack trace element describing the location of the call site currently being linked, or null if it is

      * not invoked while a call site is being linked.

      */

     public static StackTraceElement getLinkedCallSiteLocation() {

         final StackTraceElement[] trace = new Throwable().getStackTrace();

         for(int i = 0; i < trace.length - 1; ++i) {

             final StackTraceElement frame = trace[i];

             if(isRelinkFrame(frame) || isInitialLinkFrame(frame)) {

                 return trace[i + 1];

             }

         }

         return null;

     }

     /**

      * Deprecated because of not precise name.

      * @deprecated Use {@link #getLinkedCallSiteLocation()} instead.

      * @return see non-deprecated method

      */

     @Deprecated

     public static StackTraceElement getRelinkedCallSiteLocation() {

         return getLinkedCallSiteLocation();

     }

     /**

      * Returns true if the frame represents {@code MethodHandleNatives.linkCallSite()}, the frame immediately on top of

      * the call site frame when the call site is being linked for the first time.

      * @param frame the frame

      * @return true if this frame represents {@code MethodHandleNatives.linkCallSite()}

      */

     private static boolean isInitialLinkFrame(final StackTraceElement frame) {

         return testFrame(frame, INITIAL_LINK_METHOD_NAME, INITIAL_LINK_CLASS_NAME);

     }

     /**

      * Returns true if the frame represents {@code DynamicLinker.relink()}, the frame immediately on top of the call

      * site frame when the call site is being relinked (linked for second and subsequent times).

      * @param frame the frame

      * @return true if this frame represents {@code DynamicLinker.relink()}

      */

     private static boolean isRelinkFrame(final StackTraceElement frame) {

         return testFrame(frame, RELINK_METHOD_NAME, CLASS_NAME);

     }

     private static boolean testFrame(final StackTraceElement frame, final String methodName, final String className) {

         return methodName.equals(frame.getMethodName()) && className.equals(frame.getClassName());

     }

 }