jdk8-mips64-public/nashorn: bin/checkintest.sh@762eaacc45ce

     1 #!/bin/bash

2 #

     3 # Copyright (c) 2010, 2013, Oracle and/or its affiliates. All rights reserved.

     4 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

5 #

     6 # This code is free software; you can redistribute it and/or modify it

     7 # under the terms of the GNU General Public License version 2 only, as

     8 # published by the Free Software Foundation.

9 #

    10 # This code is distributed in the hope that it will be useful, but WITHOUT

    11 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    12 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

    13 # version 2 for more details (a copy is included in the LICENSE file that

    14 # accompanied this code).

    15 #

    16 # You should have received a copy of the GNU General Public License version

    17 # 2 along with this work; if not, write to the Free Software Foundation,

    18 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

    19 #

    20 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

    21 # or visit www.oracle.com if you need additional information or have any

    22 # questions.

    23 #

    25 #best pass rate at test 262 known

    26 TEST262_PASS_AT_LEAST=435

    28 RUN_TEST="true"

    29 RUN_TEST262="true"

    30 RUN_NODE="true"

    31 KEEP_OUTPUT="true"

    32 CLEAN_AND_BUILD_NASHORN="true"

    34 #the stable node version to sync against

    35 NODE_LAST_STABLE=v0.6.18

    37 #parse args

    38 for arg in $*

    39 do

    40     if [ $arg = "--no-test" ]; then

    41 	RUN_TEST="false"

    42 	echo "**** WARNING - you have disabled 'ant test', which is a minimum checkin requirement..."

    43     elif [ $arg = "--no-262" ]; then

    44 	RUN_TEST262="false"

    45     elif [ $arg = "--no-node" ]; then

    46 	RUN_NODE="false"

    47     elif [ $arg = "--no-build" ]; then

    48 	CLEAN_AND_BUILD_NASHORN="false"

    49     elif [ $arg = "--no-logs" ]; then

    50 	KEEP_OUTPUT="false"

    51     fi

    52 done

    54 function lastpart() {

    55     arr=$(echo $1 | tr "/" "\n")

    56     for x in $arr

    57     do

    58 	_last=$x

    59     done

    60     echo $_last

    61 }

    63 function check_installed() {

    64     which $1 >/dev/null

    65     if [ $? -ne 0 ]; then

    66 	echo "Error $1 not installed: $?"

    67 	exit 2

    68     fi

    69 }

    71 check_installed hg

    72 check_installed git

    73 check_installed mv

    74 check_installed git

    76 PWD=$(pwd);

    78 while [ -z $NASHORN_ROOT ]

    79 do

    80     if [ -e $PWD/.hg ]; then

    81 	NASHORN_ROOT=${PWD}

    82 	break

    83     fi

    84     PWD=$(dirname ${PWD})

    85 done

    87 echo "Nashorn root detected at ${NASHORN_ROOT}"

    89 COMMON_ROOT=$(dirname $NASHORN_ROOT)

    90 echo "Common root is ${COMMON_ROOT}"

    92 echo "Running checkintest..."

    94 ABSOLUTE_NASHORN_HOME=$COMMON_ROOT/$(lastpart $NASHORN_ROOT)

    96 if [ $CLEAN_AND_BUILD_NASHORN != "false" ]; then

    97     echo "Cleaning and building nashorn at $ABSOLUTE_NASHORN_HOME/nashorn..."

    98     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant clean >/dev/null 2>/dev/null)

    99     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant jar >/dev/null 2>/dev/null)

   100     echo "Done."

   101 fi

   103 function failure_check() {

   104     while read line

   105     do

   106 	LINE=$(echo $line | grep "Tests run")

   107 	if [ "${LINE}" != "" ]; then

   108 	    RESULT=$(echo $line | grep "Failures: 0" | grep "Errors: 0")

   109 	    if [ "${RESULT}" == "" ]; then

   110 		TESTNAME=$2

   111 		echo "There were errors in ${TESTNAME} : ${LINE}"

   112 		exit 1

   113 	    fi

   114 	fi

   115     done < $1

   116 }

   118 function test() {

   119     TEST_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)

   120     echo "Running 'ant test' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..."

   121     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test >$TEST_OUTPUT)

   122     echo "Done."

   124     failure_check $TEST_OUTPUT

   126     echo "**** SUCCESS: 'ant test' successful"

   128     if [ $KEEP_OUTPUT == "true" ]; then

   129 	cp $TEST_OUTPUT ./checkintest.test.log

   130 	rm -fr $TEST_OUTPUT

   131     fi

   132 }

   134 if [ $RUN_TEST != "false" ]; then

   135     test;

   136 fi

   138 function test262() {

   140     echo "Running 'ant test262parallel' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..."

   141     TEST262_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)

   143     echo "Looking for ${ABSOLUTE_NASHORN_HOME}/test/test262..."

   145     if [ ! -e $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 ]; then

   146 	echo "test262 is missing... looking in $COMMON_ROOT..."

   147 	if [ ! -e $COMMON_ROOT/test262 ]; then

   148 	    echo "... not there either... cloning from repo..."

   149 	    hg clone http://hg.ecmascript.org/tests/test262 $COMMON_ROOT/test262 >/dev/null 2>/dev/null

   150 	    echo "Done."

   151 	fi

   152 	echo "Adding soft link ${COMMON_ROOT}/test262 -> ${ABSOLUTE_NASHORN_HOME}/test/test262..."

   153 	ln -s $COMMON_ROOT/test262 $ABSOLUTE_NASHORN_HOME/nashorn/test/test262

   154 	echo "Done."

   155     fi

   157     echo "Ensuring test262 is up to date..."

   158     $(cd $ABSOLUTE_NASHORN_HOME/nashorn/test/test262; hg pull -u >/dev/null 2>/dev/null)

   159     echo "Done."

   161     echo "Running test262..."

   162     $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test262parallel > $TEST262_OUTPUT)

   164     FAILED=$(cat $TEST262_OUTPUT|grep "Tests run:"| cut -d ' ' -f 15 |tr -cd '"[[:digit:]]')

   165     if [ $FAILED -gt $TEST262_PASS_AT_LEAST ]; then

   166 	echo "FAILURE: There are ${FAILED} failures in test262 and can be no more than ${TEST262_PASS_AT_LEAST}"

   167 	cp $TEST262_OUTPUT ./checkintest.test262.log

   168 	echo "See ./checkintest.test262.log"

   169 	echo "Terminating due to error"

   170 	exit 1

   171     elif [ $FAILED -lt $TEST262_PASS_AT_LEAST ]; then

   172 	echo "There seem to have been fixes to 262. ${FAILED} < ${TEST262_PASS_AT_LEAST}. Please update limit in bin/checkintest.sh"

   173     fi

   175     echo "**** SUCCESS: Test262 passed with no more than ${TEST262_PASS_AT_LEAST} failures."

   177     if [ $KEEP_OUTPUT == "true" ]; then

   178 	cp $TEST262_OUTPUT ./checkintest.test262.log

   179 	rm -fr $TEST262_OUTPUT

   180     fi

   181 }

   183 if [ $RUN_TEST262 != "false" ]; then

   184     test262;

   185 fi;

   187 function testnode() {

   188     TESTNODEJAR_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX)

   190     echo "Running node tests..."

   191 #replace node jar properties nashorn with this nashorn

   193     NODEJAR_PROPERTIES=~/nodejar.properties

   195     NODE_HOME=$(cat $NODEJAR_PROPERTIES | grep ^node.home | cut -f2 -d=)

   196     NASHORN_HOME=$(cat $NODEJAR_PROPERTIES | grep ^nashorn.home | cut -f2 -d=)

   198     ABSOLUTE_NODE_HOME=$COMMON_ROOT/$(lastpart $NODE_HOME)

   200     echo "Writing nodejar.properties..."

   202     cat > $NODEJAR_PROPERTIES << EOF

   203 node.home=../node

   204 nashorn.home=../$(lastpart $NASHORN_ROOT)

   205 EOF

   206     echo "Done."

   207     echo "Checking node home ${ABSOLUTE_NODE_HOME}..."

   209     if [ ! -e $ABSOLUTE_NODE_HOME ]; then

   210 	echo "Node base dir not found. Cloning node..."

   211 	$(cd $COMMON_ROOT; git clone https://github.com/joyent/node.git $(lastpart $NODE_HOME) >/dev/null 2>/dev/null)

   212 	echo "Done."

   213 	echo "Updating to last stable version ${NODE_LAST_STABLE}..."

   214 	$(cd $ABSOLUTE_NODE_HOME; git checkout $NODE_LAST_STABLE >/dev/null 2>/dev/null)

   215 	echo "Done."

   216 	echo "Running configure..."

   217 	$(cd $ABSOLUTE_NODE_HOME; ./configure >/dev/null 2>/dev/null)

   218 	echo "Done."

   219     fi

   221     echo "Ensuring node is built..."

   222 #make sure node is built

   223     $(cd $ABSOLUTE_NODE_HOME; make >/dev/null 2>/dev/null)

   224     echo "Done."

   226     NODEJAR_HOME=$COMMON_ROOT/nodejar

   228     if [ ! -e $NODEJAR_HOME ]; then

   229 	echo "No node jar home found. cloning from depot..."

   230 	$(cd $COMMON_ROOT; hg clone https://hg.kenai.com/hg/nodejs~source nodejar >/dev/null 2>/dev/null)

   231 	$(cd $COMMON_ROOT/nodejar; ant >/dev/null)

   232 	echo "Done."

   233 	echo "Copying node files..."

   234 	$(cd $COMMON_ROOT/nodejar; ant copy-node-files >/dev/null 2>/dev/null)

   235 	echo "Patching node files..."

   236 	$(cd $COMMON_ROOT/nodejar; ant patch-node-files >/dev/null 2>/dev/null)

   237 	echo "Done."

   238     fi

   240     echo "Ensuring node.jar is up to date from source depot..."

   241     $(cd $COMMON_ROOT/nodejar; hg pull -u >/dev/null 2>/dev/null)

   242     echo "Done."

   244     echo "Installing nashorn..."

   245     $(cd $COMMON_ROOT/nodejar; ant >/dev/null)

   246     echo "Done."

   248     echo "Running node.jar test..."

   249     $(cd $COMMON_ROOT/nodejar; mvn clean verify >$TESTNODEJAR_OUTPUT)

   250     echo "Done."

   252     failure_check $TESTNODEJAR_OUTPUT

   254     echo "**** SUCCESS: Node test successful."

   256     if [ $KEEP_OUTPUT == "true" ]; then

   257 	rm -fr $TESTNODEJAR_OUTPUT

   258 	cp $TESTNODEJAR_OUTPUT ./checkintest.nodejar.log

   259     fi

   260 }

   262 if [ $RUN_NODE != "false" ]; then

   263     testnode;

   264 fi;

   266 echo "Finished"

Mercurial > jdk8-mips64-public > nashorn / file revision

bin/checkintest.sh@762eaacc45ce

bin/checkintest.sh