Mercurial > jdk8-mips64-public > nashorn / file comparison
comparison: bin/checkintest.sh
bin/checkintest.sh
- changeset 0
- b1a7da25b547
- child 952
- 6d5471a497fb
equal
deleted
inserted
replaced
| -1:000000000000 | 0:b1a7da25b547 |
|---|---|
| 1 #!/bin/bash | |
| 2 # | |
| 3 # Copyright (c) 2010, 2013, Oracle and/or its affiliates. All rights reserved. | |
| 4 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. | |
| 5 # | |
| 6 # This code is free software; you can redistribute it and/or modify it | |
| 7 # under the terms of the GNU General Public License version 2 only, as | |
| 8 # published by the Free Software Foundation. | |
| 9 # | |
| 10 # This code is distributed in the hope that it will be useful, but WITHOUT | |
| 11 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 12 # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| 13 # version 2 for more details (a copy is included in the LICENSE file that | |
| 14 # accompanied this code). | |
| 15 # | |
| 16 # You should have received a copy of the GNU General Public License version | |
| 17 # 2 along with this work; if not, write to the Free Software Foundation, | |
| 18 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| 19 # | |
| 20 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA | |
| 21 # or visit www.oracle.com if you need additional information or have any | |
| 22 # questions. | |
| 23 # | |
| 24 | |
| 25 #best pass rate at test 262 known | |
| 26 TEST262_PASS_AT_LEAST=435 | |
| 27 | |
| 28 RUN_TEST="true" | |
| 29 RUN_TEST262="true" | |
| 30 RUN_NODE="true" | |
| 31 KEEP_OUTPUT="true" | |
| 32 CLEAN_AND_BUILD_NASHORN="true" | |
| 33 | |
| 34 #the stable node version to sync against | |
| 35 NODE_LAST_STABLE=v0.6.18 | |
| 36 | |
| 37 #parse args | |
| 38 for arg in $* | |
| 39 do | |
| 40 if [ $arg = "--no-test" ]; then | |
| 41 RUN_TEST="false" | |
| 42 echo "**** WARNING - you have disabled 'ant test', which is a minimum checkin requirement..." | |
| 43 elif [ $arg = "--no-262" ]; then | |
| 44 RUN_TEST262="false" | |
| 45 elif [ $arg = "--no-node" ]; then | |
| 46 RUN_NODE="false" | |
| 47 elif [ $arg = "--no-build" ]; then | |
| 48 CLEAN_AND_BUILD_NASHORN="false" | |
| 49 elif [ $arg = "--no-logs" ]; then | |
| 50 KEEP_OUTPUT="false" | |
| 51 fi | |
| 52 done | |
| 53 | |
| 54 function lastpart() { | |
| 55 arr=$(echo $1 | tr "/" "\n") | |
| 56 for x in $arr | |
| 57 do | |
| 58 _last=$x | |
| 59 done | |
| 60 echo $_last | |
| 61 } | |
| 62 | |
| 63 function check_installed() { | |
| 64 which $1 >/dev/null | |
| 65 if [ $? -ne 0 ]; then | |
| 66 echo "Error $1 not installed: $?" | |
| 67 exit 2 | |
| 68 fi | |
| 69 } | |
| 70 | |
| 71 check_installed hg | |
| 72 check_installed git | |
| 73 check_installed mv | |
| 74 check_installed git | |
| 75 | |
| 76 PWD=$(pwd); | |
| 77 | |
| 78 while [ -z $NASHORN_ROOT ] | |
| 79 do | |
| 80 if [ -e $PWD/.hg ]; then | |
| 81 NASHORN_ROOT=${PWD} | |
| 82 break | |
| 83 fi | |
| 84 PWD=$(dirname ${PWD}) | |
| 85 done | |
| 86 | |
| 87 echo "Nashorn root detected at ${NASHORN_ROOT}" | |
| 88 | |
| 89 COMMON_ROOT=$(dirname $NASHORN_ROOT) | |
| 90 echo "Common root is ${COMMON_ROOT}" | |
| 91 | |
| 92 echo "Running checkintest..." | |
| 93 | |
| 94 ABSOLUTE_NASHORN_HOME=$COMMON_ROOT/$(lastpart $NASHORN_ROOT) | |
| 95 | |
| 96 if [ $CLEAN_AND_BUILD_NASHORN != "false" ]; then | |
| 97 echo "Cleaning and building nashorn at $ABSOLUTE_NASHORN_HOME/nashorn..." | |
| 98 $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant clean >/dev/null 2>/dev/null) | |
| 99 $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant jar >/dev/null 2>/dev/null) | |
| 100 echo "Done." | |
| 101 fi | |
| 102 | |
| 103 function failure_check() { | |
| 104 while read line | |
| 105 do | |
| 106 LINE=$(echo $line | grep "Tests run") | |
| 107 if [ "${LINE}" != "" ]; then | |
| 108 RESULT=$(echo $line | grep "Failures: 0" | grep "Errors: 0") | |
| 109 if [ "${RESULT}" == "" ]; then | |
| 110 TESTNAME=$2 | |
| 111 echo "There were errors in ${TESTNAME} : ${LINE}" | |
| 112 exit 1 | |
| 113 fi | |
| 114 fi | |
| 115 done < $1 | |
| 116 } | |
| 117 | |
| 118 function test() { | |
| 119 TEST_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) | |
| 120 echo "Running 'ant test' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..." | |
| 121 $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test >$TEST_OUTPUT) | |
| 122 echo "Done." | |
| 123 | |
| 124 failure_check $TEST_OUTPUT | |
| 125 | |
| 126 echo "**** SUCCESS: 'ant test' successful" | |
| 127 | |
| 128 if [ $KEEP_OUTPUT == "true" ]; then | |
| 129 cp $TEST_OUTPUT ./checkintest.test.log | |
| 130 rm -fr $TEST_OUTPUT | |
| 131 fi | |
| 132 } | |
| 133 | |
| 134 if [ $RUN_TEST != "false" ]; then | |
| 135 test; | |
| 136 fi | |
| 137 | |
| 138 function test262() { | |
| 139 | |
| 140 echo "Running 'ant test262parallel' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..." | |
| 141 TEST262_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) | |
| 142 | |
| 143 echo "Looking for ${ABSOLUTE_NASHORN_HOME}/test/test262..." | |
| 144 | |
| 145 if [ ! -e $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 ]; then | |
| 146 echo "test262 is missing... looking in $COMMON_ROOT..." | |
| 147 if [ ! -e $COMMON_ROOT/test262 ]; then | |
| 148 echo "... not there either... cloning from repo..." | |
| 149 hg clone http://hg.ecmascript.org/tests/test262 $COMMON_ROOT/test262 >/dev/null 2>/dev/null | |
| 150 echo "Done." | |
| 151 fi | |
| 152 echo "Adding soft link ${COMMON_ROOT}/test262 -> ${ABSOLUTE_NASHORN_HOME}/test/test262..." | |
| 153 ln -s $COMMON_ROOT/test262 $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 | |
| 154 echo "Done." | |
| 155 fi | |
| 156 | |
| 157 echo "Ensuring test262 is up to date..." | |
| 158 $(cd $ABSOLUTE_NASHORN_HOME/nashorn/test/test262; hg pull -u >/dev/null 2>/dev/null) | |
| 159 echo "Done." | |
| 160 | |
| 161 echo "Running test262..." | |
| 162 $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test262parallel > $TEST262_OUTPUT) | |
| 163 | |
| 164 FAILED=$(cat $TEST262_OUTPUT|grep "Tests run:"| cut -d ' ' -f 15 |tr -cd '"[[:digit:]]') | |
| 165 if [ $FAILED -gt $TEST262_PASS_AT_LEAST ]; then | |
| 166 echo "FAILURE: There are ${FAILED} failures in test262 and can be no more than ${TEST262_PASS_AT_LEAST}" | |
| 167 cp $TEST262_OUTPUT ./checkintest.test262.log | |
| 168 echo "See ./checkintest.test262.log" | |
| 169 echo "Terminating due to error" | |
| 170 exit 1 | |
| 171 elif [ $FAILED -lt $TEST262_PASS_AT_LEAST ]; then | |
| 172 echo "There seem to have been fixes to 262. ${FAILED} < ${TEST262_PASS_AT_LEAST}. Please update limit in bin/checkintest.sh" | |
| 173 fi | |
| 174 | |
| 175 echo "**** SUCCESS: Test262 passed with no more than ${TEST262_PASS_AT_LEAST} failures." | |
| 176 | |
| 177 if [ $KEEP_OUTPUT == "true" ]; then | |
| 178 cp $TEST262_OUTPUT ./checkintest.test262.log | |
| 179 rm -fr $TEST262_OUTPUT | |
| 180 fi | |
| 181 } | |
| 182 | |
| 183 if [ $RUN_TEST262 != "false" ]; then | |
| 184 test262; | |
| 185 fi; | |
| 186 | |
| 187 function testnode() { | |
| 188 TESTNODEJAR_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) | |
| 189 | |
| 190 echo "Running node tests..." | |
| 191 #replace node jar properties nashorn with this nashorn | |
| 192 | |
| 193 NODEJAR_PROPERTIES=~/nodejar.properties | |
| 194 | |
| 195 NODE_HOME=$(cat $NODEJAR_PROPERTIES | grep ^node.home | cut -f2 -d=) | |
| 196 NASHORN_HOME=$(cat $NODEJAR_PROPERTIES | grep ^nashorn.home | cut -f2 -d=) | |
| 197 | |
| 198 ABSOLUTE_NODE_HOME=$COMMON_ROOT/$(lastpart $NODE_HOME) | |
| 199 | |
| 200 echo "Writing nodejar.properties..." | |
| 201 | |
| 202 cat > $NODEJAR_PROPERTIES << EOF | |
| 203 node.home=../node | |
| 204 nashorn.home=../$(lastpart $NASHORN_ROOT) | |
| 205 EOF | |
| 206 echo "Done." | |
| 207 echo "Checking node home ${ABSOLUTE_NODE_HOME}..." | |
| 208 | |
| 209 if [ ! -e $ABSOLUTE_NODE_HOME ]; then | |
| 210 echo "Node base dir not found. Cloning node..." | |
| 211 $(cd $COMMON_ROOT; git clone https://github.com/joyent/node.git $(lastpart $NODE_HOME) >/dev/null 2>/dev/null) | |
| 212 echo "Done." | |
| 213 echo "Updating to last stable version ${NODE_LAST_STABLE}..." | |
| 214 $(cd $ABSOLUTE_NODE_HOME; git checkout $NODE_LAST_STABLE >/dev/null 2>/dev/null) | |
| 215 echo "Done." | |
| 216 echo "Running configure..." | |
| 217 $(cd $ABSOLUTE_NODE_HOME; ./configure >/dev/null 2>/dev/null) | |
| 218 echo "Done." | |
| 219 fi | |
| 220 | |
| 221 echo "Ensuring node is built..." | |
| 222 #make sure node is built | |
| 223 $(cd $ABSOLUTE_NODE_HOME; make >/dev/null 2>/dev/null) | |
| 224 echo "Done." | |
| 225 | |
| 226 NODEJAR_HOME=$COMMON_ROOT/nodejar | |
| 227 | |
| 228 if [ ! -e $NODEJAR_HOME ]; then | |
| 229 echo "No node jar home found. cloning from depot..." | |
| 230 $(cd $COMMON_ROOT; hg clone https://hg.kenai.com/hg/nodejs~source nodejar >/dev/null 2>/dev/null) | |
| 231 $(cd $COMMON_ROOT/nodejar; ant >/dev/null) | |
| 232 echo "Done." | |
| 233 echo "Copying node files..." | |
| 234 $(cd $COMMON_ROOT/nodejar; ant copy-node-files >/dev/null 2>/dev/null) | |
| 235 echo "Patching node files..." | |
| 236 $(cd $COMMON_ROOT/nodejar; ant patch-node-files >/dev/null 2>/dev/null) | |
| 237 echo "Done." | |
| 238 fi | |
| 239 | |
| 240 echo "Ensuring node.jar is up to date from source depot..." | |
| 241 $(cd $COMMON_ROOT/nodejar; hg pull -u >/dev/null 2>/dev/null) | |
| 242 echo "Done." | |
| 243 | |
| 244 echo "Installing nashorn..." | |
| 245 $(cd $COMMON_ROOT/nodejar; ant >/dev/null) | |
| 246 echo "Done." | |
| 247 | |
| 248 echo "Running node.jar test..." | |
| 249 $(cd $COMMON_ROOT/nodejar; mvn clean verify >$TESTNODEJAR_OUTPUT) | |
| 250 echo "Done." | |
| 251 | |
| 252 failure_check $TESTNODEJAR_OUTPUT | |
| 253 | |
| 254 echo "**** SUCCESS: Node test successful." | |
| 255 | |
| 256 if [ $KEEP_OUTPUT == "true" ]; then | |
| 257 rm -fr $TESTNODEJAR_OUTPUT | |
| 258 cp $TESTNODEJAR_OUTPUT ./checkintest.nodejar.log | |
| 259 fi | |
| 260 } | |
| 261 | |
| 262 if [ $RUN_NODE != "false" ]; then | |
| 263 testnode; | |
| 264 fi; | |
| 265 | |
| 266 echo "Finished" |
