Thu, 06 Dec 2012 09:57:41 -0800
8003250: SPARC: move MacroAssembler into separate file
Reviewed-by: jrose, kvn
1 /*
2 * Copyright (c) 2003, 2012, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/macroAssembler.inline.hpp"
27 #include "code/debugInfoRec.hpp"
28 #include "code/icBuffer.hpp"
29 #include "code/vtableStubs.hpp"
30 #include "interpreter/interpreter.hpp"
31 #include "oops/compiledICHolder.hpp"
32 #include "prims/jvmtiRedefineClassesTrace.hpp"
33 #include "runtime/sharedRuntime.hpp"
34 #include "runtime/vframeArray.hpp"
35 #include "vmreg_sparc.inline.hpp"
36 #ifdef COMPILER1
37 #include "c1/c1_Runtime1.hpp"
38 #endif
39 #ifdef COMPILER2
40 #include "opto/runtime.hpp"
41 #endif
42 #ifdef SHARK
43 #include "compiler/compileBroker.hpp"
44 #include "shark/sharkCompiler.hpp"
45 #endif
47 #define __ masm->
50 class RegisterSaver {
52 // Used for saving volatile registers. This is Gregs, Fregs, I/L/O.
53 // The Oregs are problematic. In the 32bit build the compiler can
54 // have O registers live with 64 bit quantities. A window save will
55 // cut the heads off of the registers. We have to do a very extensive
56 // stack dance to save and restore these properly.
58 // Note that the Oregs problem only exists if we block at either a polling
59 // page exception a compiled code safepoint that was not originally a call
60 // or deoptimize following one of these kinds of safepoints.
62 // Lots of registers to save. For all builds, a window save will preserve
63 // the %i and %l registers. For the 32-bit longs-in-two entries and 64-bit
64 // builds a window-save will preserve the %o registers. In the LION build
65 // we need to save the 64-bit %o registers which requires we save them
66 // before the window-save (as then they become %i registers and get their
67 // heads chopped off on interrupt). We have to save some %g registers here
68 // as well.
69 enum {
70 // This frame's save area. Includes extra space for the native call:
71 // vararg's layout space and the like. Briefly holds the caller's
72 // register save area.
73 call_args_area = frame::register_save_words_sp_offset +
74 frame::memory_parameter_word_sp_offset*wordSize,
75 // Make sure save locations are always 8 byte aligned.
76 // can't use round_to because it doesn't produce compile time constant
77 start_of_extra_save_area = ((call_args_area + 7) & ~7),
78 g1_offset = start_of_extra_save_area, // g-regs needing saving
79 g3_offset = g1_offset+8,
80 g4_offset = g3_offset+8,
81 g5_offset = g4_offset+8,
82 o0_offset = g5_offset+8,
83 o1_offset = o0_offset+8,
84 o2_offset = o1_offset+8,
85 o3_offset = o2_offset+8,
86 o4_offset = o3_offset+8,
87 o5_offset = o4_offset+8,
88 start_of_flags_save_area = o5_offset+8,
89 ccr_offset = start_of_flags_save_area,
90 fsr_offset = ccr_offset + 8,
91 d00_offset = fsr_offset+8, // Start of float save area
92 register_save_size = d00_offset+8*32
93 };
96 public:
98 static int Oexception_offset() { return o0_offset; };
99 static int G3_offset() { return g3_offset; };
100 static int G5_offset() { return g5_offset; };
101 static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words);
102 static void restore_live_registers(MacroAssembler* masm);
104 // During deoptimization only the result register need to be restored
105 // all the other values have already been extracted.
107 static void restore_result_registers(MacroAssembler* masm);
108 };
110 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words) {
111 // Record volatile registers as callee-save values in an OopMap so their save locations will be
112 // propagated to the caller frame's RegisterMap during StackFrameStream construction (needed for
113 // deoptimization; see compiledVFrame::create_stack_value). The caller's I, L and O registers
114 // are saved in register windows - I's and L's in the caller's frame and O's in the stub frame
115 // (as the stub's I's) when the runtime routine called by the stub creates its frame.
116 int i;
117 // Always make the frame size 16 byte aligned.
118 int frame_size = round_to(additional_frame_words + register_save_size, 16);
119 // OopMap frame size is in c2 stack slots (sizeof(jint)) not bytes or words
120 int frame_size_in_slots = frame_size / sizeof(jint);
121 // CodeBlob frame size is in words.
122 *total_frame_words = frame_size / wordSize;
123 // OopMap* map = new OopMap(*total_frame_words, 0);
124 OopMap* map = new OopMap(frame_size_in_slots, 0);
126 #if !defined(_LP64)
128 // Save 64-bit O registers; they will get their heads chopped off on a 'save'.
129 __ stx(O0, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8);
130 __ stx(O1, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8);
131 __ stx(O2, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+2*8);
132 __ stx(O3, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+3*8);
133 __ stx(O4, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+4*8);
134 __ stx(O5, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+5*8);
135 #endif /* _LP64 */
137 __ save(SP, -frame_size, SP);
139 #ifndef _LP64
140 // Reload the 64 bit Oregs. Although they are now Iregs we load them
141 // to Oregs here to avoid interrupts cutting off their heads
143 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8, O0);
144 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8, O1);
145 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+2*8, O2);
146 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+3*8, O3);
147 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+4*8, O4);
148 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+5*8, O5);
150 __ stx(O0, SP, o0_offset+STACK_BIAS);
151 map->set_callee_saved(VMRegImpl::stack2reg((o0_offset + 4)>>2), O0->as_VMReg());
153 __ stx(O1, SP, o1_offset+STACK_BIAS);
155 map->set_callee_saved(VMRegImpl::stack2reg((o1_offset + 4)>>2), O1->as_VMReg());
157 __ stx(O2, SP, o2_offset+STACK_BIAS);
158 map->set_callee_saved(VMRegImpl::stack2reg((o2_offset + 4)>>2), O2->as_VMReg());
160 __ stx(O3, SP, o3_offset+STACK_BIAS);
161 map->set_callee_saved(VMRegImpl::stack2reg((o3_offset + 4)>>2), O3->as_VMReg());
163 __ stx(O4, SP, o4_offset+STACK_BIAS);
164 map->set_callee_saved(VMRegImpl::stack2reg((o4_offset + 4)>>2), O4->as_VMReg());
166 __ stx(O5, SP, o5_offset+STACK_BIAS);
167 map->set_callee_saved(VMRegImpl::stack2reg((o5_offset + 4)>>2), O5->as_VMReg());
168 #endif /* _LP64 */
171 #ifdef _LP64
172 int debug_offset = 0;
173 #else
174 int debug_offset = 4;
175 #endif
176 // Save the G's
177 __ stx(G1, SP, g1_offset+STACK_BIAS);
178 map->set_callee_saved(VMRegImpl::stack2reg((g1_offset + debug_offset)>>2), G1->as_VMReg());
180 __ stx(G3, SP, g3_offset+STACK_BIAS);
181 map->set_callee_saved(VMRegImpl::stack2reg((g3_offset + debug_offset)>>2), G3->as_VMReg());
183 __ stx(G4, SP, g4_offset+STACK_BIAS);
184 map->set_callee_saved(VMRegImpl::stack2reg((g4_offset + debug_offset)>>2), G4->as_VMReg());
186 __ stx(G5, SP, g5_offset+STACK_BIAS);
187 map->set_callee_saved(VMRegImpl::stack2reg((g5_offset + debug_offset)>>2), G5->as_VMReg());
189 // This is really a waste but we'll keep things as they were for now
190 if (true) {
191 #ifndef _LP64
192 map->set_callee_saved(VMRegImpl::stack2reg((o0_offset)>>2), O0->as_VMReg()->next());
193 map->set_callee_saved(VMRegImpl::stack2reg((o1_offset)>>2), O1->as_VMReg()->next());
194 map->set_callee_saved(VMRegImpl::stack2reg((o2_offset)>>2), O2->as_VMReg()->next());
195 map->set_callee_saved(VMRegImpl::stack2reg((o3_offset)>>2), O3->as_VMReg()->next());
196 map->set_callee_saved(VMRegImpl::stack2reg((o4_offset)>>2), O4->as_VMReg()->next());
197 map->set_callee_saved(VMRegImpl::stack2reg((o5_offset)>>2), O5->as_VMReg()->next());
198 map->set_callee_saved(VMRegImpl::stack2reg((g1_offset)>>2), G1->as_VMReg()->next());
199 map->set_callee_saved(VMRegImpl::stack2reg((g3_offset)>>2), G3->as_VMReg()->next());
200 map->set_callee_saved(VMRegImpl::stack2reg((g4_offset)>>2), G4->as_VMReg()->next());
201 map->set_callee_saved(VMRegImpl::stack2reg((g5_offset)>>2), G5->as_VMReg()->next());
202 #endif /* _LP64 */
203 }
206 // Save the flags
207 __ rdccr( G5 );
208 __ stx(G5, SP, ccr_offset+STACK_BIAS);
209 __ stxfsr(SP, fsr_offset+STACK_BIAS);
211 // Save all the FP registers: 32 doubles (32 floats correspond to the 2 halves of the first 16 doubles)
212 int offset = d00_offset;
213 for( int i=0; i<FloatRegisterImpl::number_of_registers; i+=2 ) {
214 FloatRegister f = as_FloatRegister(i);
215 __ stf(FloatRegisterImpl::D, f, SP, offset+STACK_BIAS);
216 // Record as callee saved both halves of double registers (2 float registers).
217 map->set_callee_saved(VMRegImpl::stack2reg(offset>>2), f->as_VMReg());
218 map->set_callee_saved(VMRegImpl::stack2reg((offset + sizeof(float))>>2), f->as_VMReg()->next());
219 offset += sizeof(double);
220 }
222 // And we're done.
224 return map;
225 }
228 // Pop the current frame and restore all the registers that we
229 // saved.
230 void RegisterSaver::restore_live_registers(MacroAssembler* masm) {
232 // Restore all the FP registers
233 for( int i=0; i<FloatRegisterImpl::number_of_registers; i+=2 ) {
234 __ ldf(FloatRegisterImpl::D, SP, d00_offset+i*sizeof(float)+STACK_BIAS, as_FloatRegister(i));
235 }
237 __ ldx(SP, ccr_offset+STACK_BIAS, G1);
238 __ wrccr (G1) ;
240 // Restore the G's
241 // Note that G2 (AKA GThread) must be saved and restored separately.
242 // TODO-FIXME: save and restore some of the other ASRs, viz., %asi and %gsr.
244 __ ldx(SP, g1_offset+STACK_BIAS, G1);
245 __ ldx(SP, g3_offset+STACK_BIAS, G3);
246 __ ldx(SP, g4_offset+STACK_BIAS, G4);
247 __ ldx(SP, g5_offset+STACK_BIAS, G5);
250 #if !defined(_LP64)
251 // Restore the 64-bit O's.
252 __ ldx(SP, o0_offset+STACK_BIAS, O0);
253 __ ldx(SP, o1_offset+STACK_BIAS, O1);
254 __ ldx(SP, o2_offset+STACK_BIAS, O2);
255 __ ldx(SP, o3_offset+STACK_BIAS, O3);
256 __ ldx(SP, o4_offset+STACK_BIAS, O4);
257 __ ldx(SP, o5_offset+STACK_BIAS, O5);
259 // And temporarily place them in TLS
261 __ stx(O0, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8);
262 __ stx(O1, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8);
263 __ stx(O2, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+2*8);
264 __ stx(O3, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+3*8);
265 __ stx(O4, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+4*8);
266 __ stx(O5, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+5*8);
267 #endif /* _LP64 */
269 // Restore flags
271 __ ldxfsr(SP, fsr_offset+STACK_BIAS);
273 __ restore();
275 #if !defined(_LP64)
276 // Now reload the 64bit Oregs after we've restore the window.
277 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8, O0);
278 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8, O1);
279 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+2*8, O2);
280 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+3*8, O3);
281 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+4*8, O4);
282 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+5*8, O5);
283 #endif /* _LP64 */
285 }
287 // Pop the current frame and restore the registers that might be holding
288 // a result.
289 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
291 #if !defined(_LP64)
292 // 32bit build returns longs in G1
293 __ ldx(SP, g1_offset+STACK_BIAS, G1);
295 // Retrieve the 64-bit O's.
296 __ ldx(SP, o0_offset+STACK_BIAS, O0);
297 __ ldx(SP, o1_offset+STACK_BIAS, O1);
298 // and save to TLS
299 __ stx(O0, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8);
300 __ stx(O1, G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8);
301 #endif /* _LP64 */
303 __ ldf(FloatRegisterImpl::D, SP, d00_offset+STACK_BIAS, as_FloatRegister(0));
305 __ restore();
307 #if !defined(_LP64)
308 // Now reload the 64bit Oregs after we've restore the window.
309 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+0*8, O0);
310 __ ldx(G2_thread, JavaThread::o_reg_temps_offset_in_bytes()+1*8, O1);
311 #endif /* _LP64 */
313 }
315 // Is vector's size (in bytes) bigger than a size saved by default?
316 // 8 bytes FP registers are saved by default on SPARC.
317 bool SharedRuntime::is_wide_vector(int size) {
318 // Note, MaxVectorSize == 8 on SPARC.
319 assert(size <= 8, err_msg_res("%d bytes vectors are not supported", size));
320 return size > 8;
321 }
323 // The java_calling_convention describes stack locations as ideal slots on
324 // a frame with no abi restrictions. Since we must observe abi restrictions
325 // (like the placement of the register window) the slots must be biased by
326 // the following value.
327 static int reg2offset(VMReg r) {
328 return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
329 }
331 static VMRegPair reg64_to_VMRegPair(Register r) {
332 VMRegPair ret;
333 if (wordSize == 8) {
334 ret.set2(r->as_VMReg());
335 } else {
336 ret.set_pair(r->successor()->as_VMReg(), r->as_VMReg());
337 }
338 return ret;
339 }
341 // ---------------------------------------------------------------------------
342 // Read the array of BasicTypes from a signature, and compute where the
343 // arguments should go. Values in the VMRegPair regs array refer to 4-byte (VMRegImpl::stack_slot_size)
344 // quantities. Values less than VMRegImpl::stack0 are registers, those above
345 // refer to 4-byte stack slots. All stack slots are based off of the window
346 // top. VMRegImpl::stack0 refers to the first slot past the 16-word window,
347 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register
348 // values 0-63 (up to RegisterImpl::number_of_registers) are the 64-bit
349 // integer registers. Values 64-95 are the (32-bit only) float registers.
350 // Each 32-bit quantity is given its own number, so the integer registers
351 // (in either 32- or 64-bit builds) use 2 numbers. For example, there is
352 // an O0-low and an O0-high. Essentially, all int register numbers are doubled.
354 // Register results are passed in O0-O5, for outgoing call arguments. To
355 // convert to incoming arguments, convert all O's to I's. The regs array
356 // refer to the low and hi 32-bit words of 64-bit registers or stack slots.
357 // If the regs[].second() field is set to VMRegImpl::Bad(), it means it's unused (a
358 // 32-bit value was passed). If both are VMRegImpl::Bad(), it means no value was
359 // passed (used as a placeholder for the other half of longs and doubles in
360 // the 64-bit build). regs[].second() is either VMRegImpl::Bad() or regs[].second() is
361 // regs[].first()+1 (regs[].first() may be misaligned in the C calling convention).
362 // Sparc never passes a value in regs[].second() but not regs[].first() (regs[].first()
363 // == VMRegImpl::Bad() && regs[].second() != VMRegImpl::Bad()) nor unrelated values in the
364 // same VMRegPair.
366 // Note: the INPUTS in sig_bt are in units of Java argument words, which are
367 // either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit
368 // units regardless of build.
371 // ---------------------------------------------------------------------------
372 // The compiled Java calling convention. The Java convention always passes
373 // 64-bit values in adjacent aligned locations (either registers or stack),
374 // floats in float registers and doubles in aligned float pairs. There is
375 // no backing varargs store for values in registers.
376 // In the 32-bit build, longs are passed on the stack (cannot be
377 // passed in I's, because longs in I's get their heads chopped off at
378 // interrupt).
379 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
380 VMRegPair *regs,
381 int total_args_passed,
382 int is_outgoing) {
383 assert(F31->as_VMReg()->is_reg(), "overlapping stack/register numbers");
385 const int int_reg_max = SPARC_ARGS_IN_REGS_NUM;
386 const int flt_reg_max = 8;
388 int int_reg = 0;
389 int flt_reg = 0;
390 int slot = 0;
392 for (int i = 0; i < total_args_passed; i++) {
393 switch (sig_bt[i]) {
394 case T_INT:
395 case T_SHORT:
396 case T_CHAR:
397 case T_BYTE:
398 case T_BOOLEAN:
399 #ifndef _LP64
400 case T_OBJECT:
401 case T_ARRAY:
402 case T_ADDRESS: // Used, e.g., in slow-path locking for the lock's stack address
403 #endif // _LP64
404 if (int_reg < int_reg_max) {
405 Register r = is_outgoing ? as_oRegister(int_reg++) : as_iRegister(int_reg++);
406 regs[i].set1(r->as_VMReg());
407 } else {
408 regs[i].set1(VMRegImpl::stack2reg(slot++));
409 }
410 break;
412 #ifdef _LP64
413 case T_LONG:
414 assert(sig_bt[i+1] == T_VOID, "expecting VOID in other half");
415 // fall-through
416 case T_OBJECT:
417 case T_ARRAY:
418 case T_ADDRESS: // Used, e.g., in slow-path locking for the lock's stack address
419 if (int_reg < int_reg_max) {
420 Register r = is_outgoing ? as_oRegister(int_reg++) : as_iRegister(int_reg++);
421 regs[i].set2(r->as_VMReg());
422 } else {
423 slot = round_to(slot, 2); // align
424 regs[i].set2(VMRegImpl::stack2reg(slot));
425 slot += 2;
426 }
427 break;
428 #else
429 case T_LONG:
430 assert(sig_bt[i+1] == T_VOID, "expecting VOID in other half");
431 // On 32-bit SPARC put longs always on the stack to keep the pressure off
432 // integer argument registers. They should be used for oops.
433 slot = round_to(slot, 2); // align
434 regs[i].set2(VMRegImpl::stack2reg(slot));
435 slot += 2;
436 #endif
437 break;
439 case T_FLOAT:
440 if (flt_reg < flt_reg_max) {
441 FloatRegister r = as_FloatRegister(flt_reg++);
442 regs[i].set1(r->as_VMReg());
443 } else {
444 regs[i].set1(VMRegImpl::stack2reg(slot++));
445 }
446 break;
448 case T_DOUBLE:
449 assert(sig_bt[i+1] == T_VOID, "expecting half");
450 if (round_to(flt_reg, 2) + 1 < flt_reg_max) {
451 flt_reg = round_to(flt_reg, 2); // align
452 FloatRegister r = as_FloatRegister(flt_reg);
453 regs[i].set2(r->as_VMReg());
454 flt_reg += 2;
455 } else {
456 slot = round_to(slot, 2); // align
457 regs[i].set2(VMRegImpl::stack2reg(slot));
458 slot += 2;
459 }
460 break;
462 case T_VOID:
463 regs[i].set_bad(); // Halves of longs & doubles
464 break;
466 default:
467 fatal(err_msg_res("unknown basic type %d", sig_bt[i]));
468 break;
469 }
470 }
472 // retun the amount of stack space these arguments will need.
473 return slot;
474 }
476 // Helper class mostly to avoid passing masm everywhere, and handle
477 // store displacement overflow logic.
478 class AdapterGenerator {
479 MacroAssembler *masm;
480 Register Rdisp;
481 void set_Rdisp(Register r) { Rdisp = r; }
483 void patch_callers_callsite();
485 // base+st_off points to top of argument
486 int arg_offset(const int st_off) { return st_off; }
487 int next_arg_offset(const int st_off) {
488 return st_off - Interpreter::stackElementSize;
489 }
491 // Argument slot values may be loaded first into a register because
492 // they might not fit into displacement.
493 RegisterOrConstant arg_slot(const int st_off);
494 RegisterOrConstant next_arg_slot(const int st_off);
496 // Stores long into offset pointed to by base
497 void store_c2i_long(Register r, Register base,
498 const int st_off, bool is_stack);
499 void store_c2i_object(Register r, Register base,
500 const int st_off);
501 void store_c2i_int(Register r, Register base,
502 const int st_off);
503 void store_c2i_double(VMReg r_2,
504 VMReg r_1, Register base, const int st_off);
505 void store_c2i_float(FloatRegister f, Register base,
506 const int st_off);
508 public:
509 void gen_c2i_adapter(int total_args_passed,
510 // VMReg max_arg,
511 int comp_args_on_stack, // VMRegStackSlots
512 const BasicType *sig_bt,
513 const VMRegPair *regs,
514 Label& skip_fixup);
515 void gen_i2c_adapter(int total_args_passed,
516 // VMReg max_arg,
517 int comp_args_on_stack, // VMRegStackSlots
518 const BasicType *sig_bt,
519 const VMRegPair *regs);
521 AdapterGenerator(MacroAssembler *_masm) : masm(_masm) {}
522 };
525 // Patch the callers callsite with entry to compiled code if it exists.
526 void AdapterGenerator::patch_callers_callsite() {
527 Label L;
528 __ ld_ptr(G5_method, in_bytes(Method::code_offset()), G3_scratch);
529 __ br_null(G3_scratch, false, Assembler::pt, L);
530 __ delayed()->nop();
531 // Call into the VM to patch the caller, then jump to compiled callee
532 __ save_frame(4); // Args in compiled layout; do not blow them
534 // Must save all the live Gregs the list is:
535 // G1: 1st Long arg (32bit build)
536 // G2: global allocated to TLS
537 // G3: used in inline cache check (scratch)
538 // G4: 2nd Long arg (32bit build);
539 // G5: used in inline cache check (Method*)
541 // The longs must go to the stack by hand since in the 32 bit build they can be trashed by window ops.
543 #ifdef _LP64
544 // mov(s,d)
545 __ mov(G1, L1);
546 __ mov(G4, L4);
547 __ mov(G5_method, L5);
548 __ mov(G5_method, O0); // VM needs target method
549 __ mov(I7, O1); // VM needs caller's callsite
550 // Must be a leaf call...
551 // can be very far once the blob has been relocated
552 AddressLiteral dest(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite));
553 __ relocate(relocInfo::runtime_call_type);
554 __ jumpl_to(dest, O7, O7);
555 __ delayed()->mov(G2_thread, L7_thread_cache);
556 __ mov(L7_thread_cache, G2_thread);
557 __ mov(L1, G1);
558 __ mov(L4, G4);
559 __ mov(L5, G5_method);
560 #else
561 __ stx(G1, FP, -8 + STACK_BIAS);
562 __ stx(G4, FP, -16 + STACK_BIAS);
563 __ mov(G5_method, L5);
564 __ mov(G5_method, O0); // VM needs target method
565 __ mov(I7, O1); // VM needs caller's callsite
566 // Must be a leaf call...
567 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite), relocInfo::runtime_call_type);
568 __ delayed()->mov(G2_thread, L7_thread_cache);
569 __ mov(L7_thread_cache, G2_thread);
570 __ ldx(FP, -8 + STACK_BIAS, G1);
571 __ ldx(FP, -16 + STACK_BIAS, G4);
572 __ mov(L5, G5_method);
573 #endif /* _LP64 */
575 __ restore(); // Restore args
576 __ bind(L);
577 }
580 RegisterOrConstant AdapterGenerator::arg_slot(const int st_off) {
581 RegisterOrConstant roc(arg_offset(st_off));
582 return __ ensure_simm13_or_reg(roc, Rdisp);
583 }
585 RegisterOrConstant AdapterGenerator::next_arg_slot(const int st_off) {
586 RegisterOrConstant roc(next_arg_offset(st_off));
587 return __ ensure_simm13_or_reg(roc, Rdisp);
588 }
591 // Stores long into offset pointed to by base
592 void AdapterGenerator::store_c2i_long(Register r, Register base,
593 const int st_off, bool is_stack) {
594 #ifdef _LP64
595 // In V9, longs are given 2 64-bit slots in the interpreter, but the
596 // data is passed in only 1 slot.
597 __ stx(r, base, next_arg_slot(st_off));
598 #else
599 #ifdef COMPILER2
600 // Misaligned store of 64-bit data
601 __ stw(r, base, arg_slot(st_off)); // lo bits
602 __ srlx(r, 32, r);
603 __ stw(r, base, next_arg_slot(st_off)); // hi bits
604 #else
605 if (is_stack) {
606 // Misaligned store of 64-bit data
607 __ stw(r, base, arg_slot(st_off)); // lo bits
608 __ srlx(r, 32, r);
609 __ stw(r, base, next_arg_slot(st_off)); // hi bits
610 } else {
611 __ stw(r->successor(), base, arg_slot(st_off) ); // lo bits
612 __ stw(r , base, next_arg_slot(st_off)); // hi bits
613 }
614 #endif // COMPILER2
615 #endif // _LP64
616 }
618 void AdapterGenerator::store_c2i_object(Register r, Register base,
619 const int st_off) {
620 __ st_ptr (r, base, arg_slot(st_off));
621 }
623 void AdapterGenerator::store_c2i_int(Register r, Register base,
624 const int st_off) {
625 __ st (r, base, arg_slot(st_off));
626 }
628 // Stores into offset pointed to by base
629 void AdapterGenerator::store_c2i_double(VMReg r_2,
630 VMReg r_1, Register base, const int st_off) {
631 #ifdef _LP64
632 // In V9, doubles are given 2 64-bit slots in the interpreter, but the
633 // data is passed in only 1 slot.
634 __ stf(FloatRegisterImpl::D, r_1->as_FloatRegister(), base, next_arg_slot(st_off));
635 #else
636 // Need to marshal 64-bit value from misaligned Lesp loads
637 __ stf(FloatRegisterImpl::S, r_1->as_FloatRegister(), base, next_arg_slot(st_off));
638 __ stf(FloatRegisterImpl::S, r_2->as_FloatRegister(), base, arg_slot(st_off) );
639 #endif
640 }
642 void AdapterGenerator::store_c2i_float(FloatRegister f, Register base,
643 const int st_off) {
644 __ stf(FloatRegisterImpl::S, f, base, arg_slot(st_off));
645 }
647 void AdapterGenerator::gen_c2i_adapter(
648 int total_args_passed,
649 // VMReg max_arg,
650 int comp_args_on_stack, // VMRegStackSlots
651 const BasicType *sig_bt,
652 const VMRegPair *regs,
653 Label& L_skip_fixup) {
655 // Before we get into the guts of the C2I adapter, see if we should be here
656 // at all. We've come from compiled code and are attempting to jump to the
657 // interpreter, which means the caller made a static call to get here
658 // (vcalls always get a compiled target if there is one). Check for a
659 // compiled target. If there is one, we need to patch the caller's call.
660 // However we will run interpreted if we come thru here. The next pass
661 // thru the call site will run compiled. If we ran compiled here then
662 // we can (theorectically) do endless i2c->c2i->i2c transitions during
663 // deopt/uncommon trap cycles. If we always go interpreted here then
664 // we can have at most one and don't need to play any tricks to keep
665 // from endlessly growing the stack.
666 //
667 // Actually if we detected that we had an i2c->c2i transition here we
668 // ought to be able to reset the world back to the state of the interpreted
669 // call and not bother building another interpreter arg area. We don't
670 // do that at this point.
672 patch_callers_callsite();
674 __ bind(L_skip_fixup);
676 // Since all args are passed on the stack, total_args_passed*wordSize is the
677 // space we need. Add in varargs area needed by the interpreter. Round up
678 // to stack alignment.
679 const int arg_size = total_args_passed * Interpreter::stackElementSize;
680 const int varargs_area =
681 (frame::varargs_offset - frame::register_save_words)*wordSize;
682 const int extraspace = round_to(arg_size + varargs_area, 2*wordSize);
684 const int bias = STACK_BIAS;
685 const int interp_arg_offset = frame::varargs_offset*wordSize +
686 (total_args_passed-1)*Interpreter::stackElementSize;
688 const Register base = SP;
690 // Make some extra space on the stack.
691 __ sub(SP, __ ensure_simm13_or_reg(extraspace, G3_scratch), SP);
692 set_Rdisp(G3_scratch);
694 // Write the args into the outgoing interpreter space.
695 for (int i = 0; i < total_args_passed; i++) {
696 const int st_off = interp_arg_offset - (i*Interpreter::stackElementSize) + bias;
697 VMReg r_1 = regs[i].first();
698 VMReg r_2 = regs[i].second();
699 if (!r_1->is_valid()) {
700 assert(!r_2->is_valid(), "");
701 continue;
702 }
703 if (r_1->is_stack()) { // Pretend stack targets are loaded into G1
704 RegisterOrConstant ld_off = reg2offset(r_1) + extraspace + bias;
705 ld_off = __ ensure_simm13_or_reg(ld_off, Rdisp);
706 r_1 = G1_scratch->as_VMReg();// as part of the load/store shuffle
707 if (!r_2->is_valid()) __ ld (base, ld_off, G1_scratch);
708 else __ ldx(base, ld_off, G1_scratch);
709 }
711 if (r_1->is_Register()) {
712 Register r = r_1->as_Register()->after_restore();
713 if (sig_bt[i] == T_OBJECT || sig_bt[i] == T_ARRAY) {
714 store_c2i_object(r, base, st_off);
715 } else if (sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
716 store_c2i_long(r, base, st_off, r_2->is_stack());
717 } else {
718 store_c2i_int(r, base, st_off);
719 }
720 } else {
721 assert(r_1->is_FloatRegister(), "");
722 if (sig_bt[i] == T_FLOAT) {
723 store_c2i_float(r_1->as_FloatRegister(), base, st_off);
724 } else {
725 assert(sig_bt[i] == T_DOUBLE, "wrong type");
726 store_c2i_double(r_2, r_1, base, st_off);
727 }
728 }
729 }
731 // Load the interpreter entry point.
732 __ ld_ptr(G5_method, in_bytes(Method::interpreter_entry_offset()), G3_scratch);
734 // Pass O5_savedSP as an argument to the interpreter.
735 // The interpreter will restore SP to this value before returning.
736 __ add(SP, __ ensure_simm13_or_reg(extraspace, G1), O5_savedSP);
738 __ mov((frame::varargs_offset)*wordSize -
739 1*Interpreter::stackElementSize+bias+BytesPerWord, G1);
740 // Jump to the interpreter just as if interpreter was doing it.
741 __ jmpl(G3_scratch, 0, G0);
742 // Setup Lesp for the call. Cannot actually set Lesp as the current Lesp
743 // (really L0) is in use by the compiled frame as a generic temp. However,
744 // the interpreter does not know where its args are without some kind of
745 // arg pointer being passed in. Pass it in Gargs.
746 __ delayed()->add(SP, G1, Gargs);
747 }
749 static void range_check(MacroAssembler* masm, Register pc_reg, Register temp_reg, Register temp2_reg,
750 address code_start, address code_end,
751 Label& L_ok) {
752 Label L_fail;
753 __ set(ExternalAddress(code_start), temp_reg);
754 __ set(pointer_delta(code_end, code_start, 1), temp2_reg);
755 __ cmp(pc_reg, temp_reg);
756 __ brx(Assembler::lessEqualUnsigned, false, Assembler::pn, L_fail);
757 __ delayed()->add(temp_reg, temp2_reg, temp_reg);
758 __ cmp(pc_reg, temp_reg);
759 __ cmp_and_brx_short(pc_reg, temp_reg, Assembler::lessUnsigned, Assembler::pt, L_ok);
760 __ bind(L_fail);
761 }
763 void AdapterGenerator::gen_i2c_adapter(
764 int total_args_passed,
765 // VMReg max_arg,
766 int comp_args_on_stack, // VMRegStackSlots
767 const BasicType *sig_bt,
768 const VMRegPair *regs) {
770 // Generate an I2C adapter: adjust the I-frame to make space for the C-frame
771 // layout. Lesp was saved by the calling I-frame and will be restored on
772 // return. Meanwhile, outgoing arg space is all owned by the callee
773 // C-frame, so we can mangle it at will. After adjusting the frame size,
774 // hoist register arguments and repack other args according to the compiled
775 // code convention. Finally, end in a jump to the compiled code. The entry
776 // point address is the start of the buffer.
778 // We will only enter here from an interpreted frame and never from after
779 // passing thru a c2i. Azul allowed this but we do not. If we lose the
780 // race and use a c2i we will remain interpreted for the race loser(s).
781 // This removes all sorts of headaches on the x86 side and also eliminates
782 // the possibility of having c2i -> i2c -> c2i -> ... endless transitions.
784 // More detail:
785 // Adapters can be frameless because they do not require the caller
786 // to perform additional cleanup work, such as correcting the stack pointer.
787 // An i2c adapter is frameless because the *caller* frame, which is interpreted,
788 // routinely repairs its own stack pointer (from interpreter_frame_last_sp),
789 // even if a callee has modified the stack pointer.
790 // A c2i adapter is frameless because the *callee* frame, which is interpreted,
791 // routinely repairs its caller's stack pointer (from sender_sp, which is set
792 // up via the senderSP register).
793 // In other words, if *either* the caller or callee is interpreted, we can
794 // get the stack pointer repaired after a call.
795 // This is why c2i and i2c adapters cannot be indefinitely composed.
796 // In particular, if a c2i adapter were to somehow call an i2c adapter,
797 // both caller and callee would be compiled methods, and neither would
798 // clean up the stack pointer changes performed by the two adapters.
799 // If this happens, control eventually transfers back to the compiled
800 // caller, but with an uncorrected stack, causing delayed havoc.
802 if (VerifyAdapterCalls &&
803 (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) {
804 // So, let's test for cascading c2i/i2c adapters right now.
805 // assert(Interpreter::contains($return_addr) ||
806 // StubRoutines::contains($return_addr),
807 // "i2c adapter must return to an interpreter frame");
808 __ block_comment("verify_i2c { ");
809 Label L_ok;
810 if (Interpreter::code() != NULL)
811 range_check(masm, O7, O0, O1,
812 Interpreter::code()->code_start(), Interpreter::code()->code_end(),
813 L_ok);
814 if (StubRoutines::code1() != NULL)
815 range_check(masm, O7, O0, O1,
816 StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(),
817 L_ok);
818 if (StubRoutines::code2() != NULL)
819 range_check(masm, O7, O0, O1,
820 StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(),
821 L_ok);
822 const char* msg = "i2c adapter must return to an interpreter frame";
823 __ block_comment(msg);
824 __ stop(msg);
825 __ bind(L_ok);
826 __ block_comment("} verify_i2ce ");
827 }
829 // As you can see from the list of inputs & outputs there are not a lot
830 // of temp registers to work with: mostly G1, G3 & G4.
832 // Inputs:
833 // G2_thread - TLS
834 // G5_method - Method oop
835 // G4 (Gargs) - Pointer to interpreter's args
836 // O0..O4 - free for scratch
837 // O5_savedSP - Caller's saved SP, to be restored if needed
838 // O6 - Current SP!
839 // O7 - Valid return address
840 // L0-L7, I0-I7 - Caller's temps (no frame pushed yet)
842 // Outputs:
843 // G2_thread - TLS
844 // O0-O5 - Outgoing args in compiled layout
845 // O6 - Adjusted or restored SP
846 // O7 - Valid return address
847 // L0-L7, I0-I7 - Caller's temps (no frame pushed yet)
848 // F0-F7 - more outgoing args
851 // Gargs is the incoming argument base, and also an outgoing argument.
852 __ sub(Gargs, BytesPerWord, Gargs);
854 // ON ENTRY TO THE CODE WE ARE MAKING, WE HAVE AN INTERPRETED FRAME
855 // WITH O7 HOLDING A VALID RETURN PC
856 //
857 // | |
858 // : java stack :
859 // | |
860 // +--------------+ <--- start of outgoing args
861 // | receiver | |
862 // : rest of args : |---size is java-arg-words
863 // | | |
864 // +--------------+ <--- O4_args (misaligned) and Lesp if prior is not C2I
865 // | | |
866 // : unused : |---Space for max Java stack, plus stack alignment
867 // | | |
868 // +--------------+ <--- SP + 16*wordsize
869 // | |
870 // : window :
871 // | |
872 // +--------------+ <--- SP
874 // WE REPACK THE STACK. We use the common calling convention layout as
875 // discovered by calling SharedRuntime::calling_convention. We assume it
876 // causes an arbitrary shuffle of memory, which may require some register
877 // temps to do the shuffle. We hope for (and optimize for) the case where
878 // temps are not needed. We may have to resize the stack slightly, in case
879 // we need alignment padding (32-bit interpreter can pass longs & doubles
880 // misaligned, but the compilers expect them aligned).
881 //
882 // | |
883 // : java stack :
884 // | |
885 // +--------------+ <--- start of outgoing args
886 // | pad, align | |
887 // +--------------+ |
888 // | ints, longs, | |
889 // | floats, | |---Outgoing stack args.
890 // : doubles : | First few args in registers.
891 // | | |
892 // +--------------+ <--- SP' + 16*wordsize
893 // | |
894 // : window :
895 // | |
896 // +--------------+ <--- SP'
898 // ON EXIT FROM THE CODE WE ARE MAKING, WE STILL HAVE AN INTERPRETED FRAME
899 // WITH O7 HOLDING A VALID RETURN PC - ITS JUST THAT THE ARGS ARE NOW SETUP
900 // FOR COMPILED CODE AND THE FRAME SLIGHTLY GROWN.
902 // Cut-out for having no stack args. Since up to 6 args are passed
903 // in registers, we will commonly have no stack args.
904 if (comp_args_on_stack > 0) {
905 // Convert VMReg stack slots to words.
906 int comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord;
907 // Round up to miminum stack alignment, in wordSize
908 comp_words_on_stack = round_to(comp_words_on_stack, 2);
909 // Now compute the distance from Lesp to SP. This calculation does not
910 // include the space for total_args_passed because Lesp has not yet popped
911 // the arguments.
912 __ sub(SP, (comp_words_on_stack)*wordSize, SP);
913 }
915 // Now generate the shuffle code. Pick up all register args and move the
916 // rest through G1_scratch.
917 for (int i = 0; i < total_args_passed; i++) {
918 if (sig_bt[i] == T_VOID) {
919 // Longs and doubles are passed in native word order, but misaligned
920 // in the 32-bit build.
921 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
922 continue;
923 }
925 // Pick up 0, 1 or 2 words from Lesp+offset. Assume mis-aligned in the
926 // 32-bit build and aligned in the 64-bit build. Look for the obvious
927 // ldx/lddf optimizations.
929 // Load in argument order going down.
930 const int ld_off = (total_args_passed-i)*Interpreter::stackElementSize;
931 set_Rdisp(G1_scratch);
933 VMReg r_1 = regs[i].first();
934 VMReg r_2 = regs[i].second();
935 if (!r_1->is_valid()) {
936 assert(!r_2->is_valid(), "");
937 continue;
938 }
939 if (r_1->is_stack()) { // Pretend stack targets are loaded into F8/F9
940 r_1 = F8->as_VMReg(); // as part of the load/store shuffle
941 if (r_2->is_valid()) r_2 = r_1->next();
942 }
943 if (r_1->is_Register()) { // Register argument
944 Register r = r_1->as_Register()->after_restore();
945 if (!r_2->is_valid()) {
946 __ ld(Gargs, arg_slot(ld_off), r);
947 } else {
948 #ifdef _LP64
949 // In V9, longs are given 2 64-bit slots in the interpreter, but the
950 // data is passed in only 1 slot.
951 RegisterOrConstant slot = (sig_bt[i] == T_LONG) ?
952 next_arg_slot(ld_off) : arg_slot(ld_off);
953 __ ldx(Gargs, slot, r);
954 #else
955 fatal("longs should be on stack");
956 #endif
957 }
958 } else {
959 assert(r_1->is_FloatRegister(), "");
960 if (!r_2->is_valid()) {
961 __ ldf(FloatRegisterImpl::S, Gargs, arg_slot(ld_off), r_1->as_FloatRegister());
962 } else {
963 #ifdef _LP64
964 // In V9, doubles are given 2 64-bit slots in the interpreter, but the
965 // data is passed in only 1 slot. This code also handles longs that
966 // are passed on the stack, but need a stack-to-stack move through a
967 // spare float register.
968 RegisterOrConstant slot = (sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) ?
969 next_arg_slot(ld_off) : arg_slot(ld_off);
970 __ ldf(FloatRegisterImpl::D, Gargs, slot, r_1->as_FloatRegister());
971 #else
972 // Need to marshal 64-bit value from misaligned Lesp loads
973 __ ldf(FloatRegisterImpl::S, Gargs, next_arg_slot(ld_off), r_1->as_FloatRegister());
974 __ ldf(FloatRegisterImpl::S, Gargs, arg_slot(ld_off), r_2->as_FloatRegister());
975 #endif
976 }
977 }
978 // Was the argument really intended to be on the stack, but was loaded
979 // into F8/F9?
980 if (regs[i].first()->is_stack()) {
981 assert(r_1->as_FloatRegister() == F8, "fix this code");
982 // Convert stack slot to an SP offset
983 int st_off = reg2offset(regs[i].first()) + STACK_BIAS;
984 // Store down the shuffled stack word. Target address _is_ aligned.
985 RegisterOrConstant slot = __ ensure_simm13_or_reg(st_off, Rdisp);
986 if (!r_2->is_valid()) __ stf(FloatRegisterImpl::S, r_1->as_FloatRegister(), SP, slot);
987 else __ stf(FloatRegisterImpl::D, r_1->as_FloatRegister(), SP, slot);
988 }
989 }
991 // Jump to the compiled code just as if compiled code was doing it.
992 __ ld_ptr(G5_method, in_bytes(Method::from_compiled_offset()), G3);
994 // 6243940 We might end up in handle_wrong_method if
995 // the callee is deoptimized as we race thru here. If that
996 // happens we don't want to take a safepoint because the
997 // caller frame will look interpreted and arguments are now
998 // "compiled" so it is much better to make this transition
999 // invisible to the stack walking code. Unfortunately if
1000 // we try and find the callee by normal means a safepoint
1001 // is possible. So we stash the desired callee in the thread
1002 // and the vm will find there should this case occur.
1003 Address callee_target_addr(G2_thread, JavaThread::callee_target_offset());
1004 __ st_ptr(G5_method, callee_target_addr);
1006 if (StressNonEntrant) {
1007 // Open a big window for deopt failure
1008 __ save_frame(0);
1009 __ mov(G0, L0);
1010 Label loop;
1011 __ bind(loop);
1012 __ sub(L0, 1, L0);
1013 __ br_null_short(L0, Assembler::pt, loop);
1014 __ restore();
1015 }
1017 __ jmpl(G3, 0, G0);
1018 __ delayed()->nop();
1019 }
1021 // ---------------------------------------------------------------
1022 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
1023 int total_args_passed,
1024 // VMReg max_arg,
1025 int comp_args_on_stack, // VMRegStackSlots
1026 const BasicType *sig_bt,
1027 const VMRegPair *regs,
1028 AdapterFingerPrint* fingerprint) {
1029 address i2c_entry = __ pc();
1031 AdapterGenerator agen(masm);
1033 agen.gen_i2c_adapter(total_args_passed, comp_args_on_stack, sig_bt, regs);
1036 // -------------------------------------------------------------------------
1037 // Generate a C2I adapter. On entry we know G5 holds the Method*. The
1038 // args start out packed in the compiled layout. They need to be unpacked
1039 // into the interpreter layout. This will almost always require some stack
1040 // space. We grow the current (compiled) stack, then repack the args. We
1041 // finally end in a jump to the generic interpreter entry point. On exit
1042 // from the interpreter, the interpreter will restore our SP (lest the
1043 // compiled code, which relys solely on SP and not FP, get sick).
1045 address c2i_unverified_entry = __ pc();
1046 Label L_skip_fixup;
1047 {
1048 Register R_temp = G1; // another scratch register
1050 AddressLiteral ic_miss(SharedRuntime::get_ic_miss_stub());
1052 __ verify_oop(O0);
1053 __ load_klass(O0, G3_scratch);
1055 __ ld_ptr(G5_method, CompiledICHolder::holder_klass_offset(), R_temp);
1056 __ cmp(G3_scratch, R_temp);
1058 Label ok, ok2;
1059 __ brx(Assembler::equal, false, Assembler::pt, ok);
1060 __ delayed()->ld_ptr(G5_method, CompiledICHolder::holder_method_offset(), G5_method);
1061 __ jump_to(ic_miss, G3_scratch);
1062 __ delayed()->nop();
1064 __ bind(ok);
1065 // Method might have been compiled since the call site was patched to
1066 // interpreted if that is the case treat it as a miss so we can get
1067 // the call site corrected.
1068 __ ld_ptr(G5_method, in_bytes(Method::code_offset()), G3_scratch);
1069 __ bind(ok2);
1070 __ br_null(G3_scratch, false, Assembler::pt, L_skip_fixup);
1071 __ delayed()->nop();
1072 __ jump_to(ic_miss, G3_scratch);
1073 __ delayed()->nop();
1075 }
1077 address c2i_entry = __ pc();
1079 agen.gen_c2i_adapter(total_args_passed, comp_args_on_stack, sig_bt, regs, L_skip_fixup);
1081 __ flush();
1082 return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);
1084 }
1086 // Helper function for native calling conventions
1087 static VMReg int_stk_helper( int i ) {
1088 // Bias any stack based VMReg we get by ignoring the window area
1089 // but not the register parameter save area.
1090 //
1091 // This is strange for the following reasons. We'd normally expect
1092 // the calling convention to return an VMReg for a stack slot
1093 // completely ignoring any abi reserved area. C2 thinks of that
1094 // abi area as only out_preserve_stack_slots. This does not include
1095 // the area allocated by the C abi to store down integer arguments
1096 // because the java calling convention does not use it. So
1097 // since c2 assumes that there are only out_preserve_stack_slots
1098 // to bias the optoregs (which impacts VMRegs) when actually referencing any actual stack
1099 // location the c calling convention must add in this bias amount
1100 // to make up for the fact that the out_preserve_stack_slots is
1101 // insufficient for C calls. What a mess. I sure hope those 6
1102 // stack words were worth it on every java call!
1104 // Another way of cleaning this up would be for out_preserve_stack_slots
1105 // to take a parameter to say whether it was C or java calling conventions.
1106 // Then things might look a little better (but not much).
1108 int mem_parm_offset = i - SPARC_ARGS_IN_REGS_NUM;
1109 if( mem_parm_offset < 0 ) {
1110 return as_oRegister(i)->as_VMReg();
1111 } else {
1112 int actual_offset = (mem_parm_offset + frame::memory_parameter_word_sp_offset) * VMRegImpl::slots_per_word;
1113 // Now return a biased offset that will be correct when out_preserve_slots is added back in
1114 return VMRegImpl::stack2reg(actual_offset - SharedRuntime::out_preserve_stack_slots());
1115 }
1116 }
1119 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
1120 VMRegPair *regs,
1121 int total_args_passed) {
1123 // Return the number of VMReg stack_slots needed for the args.
1124 // This value does not include an abi space (like register window
1125 // save area).
1127 // The native convention is V8 if !LP64
1128 // The LP64 convention is the V9 convention which is slightly more sane.
1130 // We return the amount of VMReg stack slots we need to reserve for all
1131 // the arguments NOT counting out_preserve_stack_slots. Since we always
1132 // have space for storing at least 6 registers to memory we start with that.
1133 // See int_stk_helper for a further discussion.
1134 int max_stack_slots = (frame::varargs_offset * VMRegImpl::slots_per_word) - SharedRuntime::out_preserve_stack_slots();
1136 #ifdef _LP64
1137 // V9 convention: All things "as-if" on double-wide stack slots.
1138 // Hoist any int/ptr/long's in the first 6 to int regs.
1139 // Hoist any flt/dbl's in the first 16 dbl regs.
1140 int j = 0; // Count of actual args, not HALVES
1141 for( int i=0; i<total_args_passed; i++, j++ ) {
1142 switch( sig_bt[i] ) {
1143 case T_BOOLEAN:
1144 case T_BYTE:
1145 case T_CHAR:
1146 case T_INT:
1147 case T_SHORT:
1148 regs[i].set1( int_stk_helper( j ) ); break;
1149 case T_LONG:
1150 assert( sig_bt[i+1] == T_VOID, "expecting half" );
1151 case T_ADDRESS: // raw pointers, like current thread, for VM calls
1152 case T_ARRAY:
1153 case T_OBJECT:
1154 case T_METADATA:
1155 regs[i].set2( int_stk_helper( j ) );
1156 break;
1157 case T_FLOAT:
1158 if ( j < 16 ) {
1159 // V9ism: floats go in ODD registers
1160 regs[i].set1(as_FloatRegister(1 + (j<<1))->as_VMReg());
1161 } else {
1162 // V9ism: floats go in ODD stack slot
1163 regs[i].set1(VMRegImpl::stack2reg(1 + (j<<1)));
1164 }
1165 break;
1166 case T_DOUBLE:
1167 assert( sig_bt[i+1] == T_VOID, "expecting half" );
1168 if ( j < 16 ) {
1169 // V9ism: doubles go in EVEN/ODD regs
1170 regs[i].set2(as_FloatRegister(j<<1)->as_VMReg());
1171 } else {
1172 // V9ism: doubles go in EVEN/ODD stack slots
1173 regs[i].set2(VMRegImpl::stack2reg(j<<1));
1174 }
1175 break;
1176 case T_VOID: regs[i].set_bad(); j--; break; // Do not count HALVES
1177 default:
1178 ShouldNotReachHere();
1179 }
1180 if (regs[i].first()->is_stack()) {
1181 int off = regs[i].first()->reg2stack();
1182 if (off > max_stack_slots) max_stack_slots = off;
1183 }
1184 if (regs[i].second()->is_stack()) {
1185 int off = regs[i].second()->reg2stack();
1186 if (off > max_stack_slots) max_stack_slots = off;
1187 }
1188 }
1190 #else // _LP64
1191 // V8 convention: first 6 things in O-regs, rest on stack.
1192 // Alignment is willy-nilly.
1193 for( int i=0; i<total_args_passed; i++ ) {
1194 switch( sig_bt[i] ) {
1195 case T_ADDRESS: // raw pointers, like current thread, for VM calls
1196 case T_ARRAY:
1197 case T_BOOLEAN:
1198 case T_BYTE:
1199 case T_CHAR:
1200 case T_FLOAT:
1201 case T_INT:
1202 case T_OBJECT:
1203 case T_METADATA:
1204 case T_SHORT:
1205 regs[i].set1( int_stk_helper( i ) );
1206 break;
1207 case T_DOUBLE:
1208 case T_LONG:
1209 assert( sig_bt[i+1] == T_VOID, "expecting half" );
1210 regs[i].set_pair( int_stk_helper( i+1 ), int_stk_helper( i ) );
1211 break;
1212 case T_VOID: regs[i].set_bad(); break;
1213 default:
1214 ShouldNotReachHere();
1215 }
1216 if (regs[i].first()->is_stack()) {
1217 int off = regs[i].first()->reg2stack();
1218 if (off > max_stack_slots) max_stack_slots = off;
1219 }
1220 if (regs[i].second()->is_stack()) {
1221 int off = regs[i].second()->reg2stack();
1222 if (off > max_stack_slots) max_stack_slots = off;
1223 }
1224 }
1225 #endif // _LP64
1227 return round_to(max_stack_slots + 1, 2);
1229 }
1232 // ---------------------------------------------------------------------------
1233 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1234 switch (ret_type) {
1235 case T_FLOAT:
1236 __ stf(FloatRegisterImpl::S, F0, SP, frame_slots*VMRegImpl::stack_slot_size - 4+STACK_BIAS);
1237 break;
1238 case T_DOUBLE:
1239 __ stf(FloatRegisterImpl::D, F0, SP, frame_slots*VMRegImpl::stack_slot_size - 8+STACK_BIAS);
1240 break;
1241 }
1242 }
1244 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1245 switch (ret_type) {
1246 case T_FLOAT:
1247 __ ldf(FloatRegisterImpl::S, SP, frame_slots*VMRegImpl::stack_slot_size - 4+STACK_BIAS, F0);
1248 break;
1249 case T_DOUBLE:
1250 __ ldf(FloatRegisterImpl::D, SP, frame_slots*VMRegImpl::stack_slot_size - 8+STACK_BIAS, F0);
1251 break;
1252 }
1253 }
1255 // Check and forward and pending exception. Thread is stored in
1256 // L7_thread_cache and possibly NOT in G2_thread. Since this is a native call, there
1257 // is no exception handler. We merely pop this frame off and throw the
1258 // exception in the caller's frame.
1259 static void check_forward_pending_exception(MacroAssembler *masm, Register Rex_oop) {
1260 Label L;
1261 __ br_null(Rex_oop, false, Assembler::pt, L);
1262 __ delayed()->mov(L7_thread_cache, G2_thread); // restore in case we have exception
1263 // Since this is a native call, we *know* the proper exception handler
1264 // without calling into the VM: it's the empty function. Just pop this
1265 // frame and then jump to forward_exception_entry; O7 will contain the
1266 // native caller's return PC.
1267 AddressLiteral exception_entry(StubRoutines::forward_exception_entry());
1268 __ jump_to(exception_entry, G3_scratch);
1269 __ delayed()->restore(); // Pop this frame off.
1270 __ bind(L);
1271 }
1273 // A simple move of integer like type
1274 static void simple_move32(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1275 if (src.first()->is_stack()) {
1276 if (dst.first()->is_stack()) {
1277 // stack to stack
1278 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1279 __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1280 } else {
1281 // stack to reg
1282 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1283 }
1284 } else if (dst.first()->is_stack()) {
1285 // reg to stack
1286 __ st(src.first()->as_Register(), SP, reg2offset(dst.first()) + STACK_BIAS);
1287 } else {
1288 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1289 }
1290 }
1292 // On 64 bit we will store integer like items to the stack as
1293 // 64 bits items (sparc abi) even though java would only store
1294 // 32bits for a parameter. On 32bit it will simply be 32 bits
1295 // So this routine will do 32->32 on 32bit and 32->64 on 64bit
1296 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1297 if (src.first()->is_stack()) {
1298 if (dst.first()->is_stack()) {
1299 // stack to stack
1300 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1301 __ st_ptr(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1302 } else {
1303 // stack to reg
1304 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1305 }
1306 } else if (dst.first()->is_stack()) {
1307 // reg to stack
1308 __ st_ptr(src.first()->as_Register(), SP, reg2offset(dst.first()) + STACK_BIAS);
1309 } else {
1310 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1311 }
1312 }
1315 static void move_ptr(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1316 if (src.first()->is_stack()) {
1317 if (dst.first()->is_stack()) {
1318 // stack to stack
1319 __ ld_ptr(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1320 __ st_ptr(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1321 } else {
1322 // stack to reg
1323 __ ld_ptr(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1324 }
1325 } else if (dst.first()->is_stack()) {
1326 // reg to stack
1327 __ st_ptr(src.first()->as_Register(), SP, reg2offset(dst.first()) + STACK_BIAS);
1328 } else {
1329 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1330 }
1331 }
1334 // An oop arg. Must pass a handle not the oop itself
1335 static void object_move(MacroAssembler* masm,
1336 OopMap* map,
1337 int oop_handle_offset,
1338 int framesize_in_slots,
1339 VMRegPair src,
1340 VMRegPair dst,
1341 bool is_receiver,
1342 int* receiver_offset) {
1344 // must pass a handle. First figure out the location we use as a handle
1346 if (src.first()->is_stack()) {
1347 // Oop is already on the stack
1348 Register rHandle = dst.first()->is_stack() ? L5 : dst.first()->as_Register();
1349 __ add(FP, reg2offset(src.first()) + STACK_BIAS, rHandle);
1350 __ ld_ptr(rHandle, 0, L4);
1351 #ifdef _LP64
1352 __ movr( Assembler::rc_z, L4, G0, rHandle );
1353 #else
1354 __ tst( L4 );
1355 __ movcc( Assembler::zero, false, Assembler::icc, G0, rHandle );
1356 #endif
1357 if (dst.first()->is_stack()) {
1358 __ st_ptr(rHandle, SP, reg2offset(dst.first()) + STACK_BIAS);
1359 }
1360 int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1361 if (is_receiver) {
1362 *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
1363 }
1364 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
1365 } else {
1366 // Oop is in an input register pass we must flush it to the stack
1367 const Register rOop = src.first()->as_Register();
1368 const Register rHandle = L5;
1369 int oop_slot = rOop->input_number() * VMRegImpl::slots_per_word + oop_handle_offset;
1370 int offset = oop_slot*VMRegImpl::stack_slot_size;
1371 Label skip;
1372 __ st_ptr(rOop, SP, offset + STACK_BIAS);
1373 if (is_receiver) {
1374 *receiver_offset = oop_slot * VMRegImpl::stack_slot_size;
1375 }
1376 map->set_oop(VMRegImpl::stack2reg(oop_slot));
1377 __ add(SP, offset + STACK_BIAS, rHandle);
1378 #ifdef _LP64
1379 __ movr( Assembler::rc_z, rOop, G0, rHandle );
1380 #else
1381 __ tst( rOop );
1382 __ movcc( Assembler::zero, false, Assembler::icc, G0, rHandle );
1383 #endif
1385 if (dst.first()->is_stack()) {
1386 __ st_ptr(rHandle, SP, reg2offset(dst.first()) + STACK_BIAS);
1387 } else {
1388 __ mov(rHandle, dst.first()->as_Register());
1389 }
1390 }
1391 }
1393 // A float arg may have to do float reg int reg conversion
1394 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1395 assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
1397 if (src.first()->is_stack()) {
1398 if (dst.first()->is_stack()) {
1399 // stack to stack the easiest of the bunch
1400 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1401 __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1402 } else {
1403 // stack to reg
1404 if (dst.first()->is_Register()) {
1405 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1406 } else {
1407 __ ldf(FloatRegisterImpl::S, FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_FloatRegister());
1408 }
1409 }
1410 } else if (dst.first()->is_stack()) {
1411 // reg to stack
1412 if (src.first()->is_Register()) {
1413 __ st(src.first()->as_Register(), SP, reg2offset(dst.first()) + STACK_BIAS);
1414 } else {
1415 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(), SP, reg2offset(dst.first()) + STACK_BIAS);
1416 }
1417 } else {
1418 // reg to reg
1419 if (src.first()->is_Register()) {
1420 if (dst.first()->is_Register()) {
1421 // gpr -> gpr
1422 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1423 } else {
1424 // gpr -> fpr
1425 __ st(src.first()->as_Register(), FP, -4 + STACK_BIAS);
1426 __ ldf(FloatRegisterImpl::S, FP, -4 + STACK_BIAS, dst.first()->as_FloatRegister());
1427 }
1428 } else if (dst.first()->is_Register()) {
1429 // fpr -> gpr
1430 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(), FP, -4 + STACK_BIAS);
1431 __ ld(FP, -4 + STACK_BIAS, dst.first()->as_Register());
1432 } else {
1433 // fpr -> fpr
1434 // In theory these overlap but the ordering is such that this is likely a nop
1435 if ( src.first() != dst.first()) {
1436 __ fmov(FloatRegisterImpl::S, src.first()->as_FloatRegister(), dst.first()->as_FloatRegister());
1437 }
1438 }
1439 }
1440 }
1442 static void split_long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1443 VMRegPair src_lo(src.first());
1444 VMRegPair src_hi(src.second());
1445 VMRegPair dst_lo(dst.first());
1446 VMRegPair dst_hi(dst.second());
1447 simple_move32(masm, src_lo, dst_lo);
1448 simple_move32(masm, src_hi, dst_hi);
1449 }
1451 // A long move
1452 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1454 // Do the simple ones here else do two int moves
1455 if (src.is_single_phys_reg() ) {
1456 if (dst.is_single_phys_reg()) {
1457 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1458 } else {
1459 // split src into two separate registers
1460 // Remember hi means hi address or lsw on sparc
1461 // Move msw to lsw
1462 if (dst.second()->is_reg()) {
1463 // MSW -> MSW
1464 __ srax(src.first()->as_Register(), 32, dst.first()->as_Register());
1465 // Now LSW -> LSW
1466 // this will only move lo -> lo and ignore hi
1467 VMRegPair split(dst.second());
1468 simple_move32(masm, src, split);
1469 } else {
1470 VMRegPair split(src.first(), L4->as_VMReg());
1471 // MSW -> MSW (lo ie. first word)
1472 __ srax(src.first()->as_Register(), 32, L4);
1473 split_long_move(masm, split, dst);
1474 }
1475 }
1476 } else if (dst.is_single_phys_reg()) {
1477 if (src.is_adjacent_aligned_on_stack(2)) {
1478 __ ldx(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1479 } else {
1480 // dst is a single reg.
1481 // Remember lo is low address not msb for stack slots
1482 // and lo is the "real" register for registers
1483 // src is
1485 VMRegPair split;
1487 if (src.first()->is_reg()) {
1488 // src.lo (msw) is a reg, src.hi is stk/reg
1489 // we will move: src.hi (LSW) -> dst.lo, src.lo (MSW) -> src.lo [the MSW is in the LSW of the reg]
1490 split.set_pair(dst.first(), src.first());
1491 } else {
1492 // msw is stack move to L5
1493 // lsw is stack move to dst.lo (real reg)
1494 // we will move: src.hi (LSW) -> dst.lo, src.lo (MSW) -> L5
1495 split.set_pair(dst.first(), L5->as_VMReg());
1496 }
1498 // src.lo -> src.lo/L5, src.hi -> dst.lo (the real reg)
1499 // msw -> src.lo/L5, lsw -> dst.lo
1500 split_long_move(masm, src, split);
1502 // So dst now has the low order correct position the
1503 // msw half
1504 __ sllx(split.first()->as_Register(), 32, L5);
1506 const Register d = dst.first()->as_Register();
1507 __ or3(L5, d, d);
1508 }
1509 } else {
1510 // For LP64 we can probably do better.
1511 split_long_move(masm, src, dst);
1512 }
1513 }
1515 // A double move
1516 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1518 // The painful thing here is that like long_move a VMRegPair might be
1519 // 1: a single physical register
1520 // 2: two physical registers (v8)
1521 // 3: a physical reg [lo] and a stack slot [hi] (v8)
1522 // 4: two stack slots
1524 // Since src is always a java calling convention we know that the src pair
1525 // is always either all registers or all stack (and aligned?)
1527 // in a register [lo] and a stack slot [hi]
1528 if (src.first()->is_stack()) {
1529 if (dst.first()->is_stack()) {
1530 // stack to stack the easiest of the bunch
1531 // ought to be a way to do this where if alignment is ok we use ldd/std when possible
1532 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1533 __ ld(FP, reg2offset(src.second()) + STACK_BIAS, L4);
1534 __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1535 __ st(L4, SP, reg2offset(dst.second()) + STACK_BIAS);
1536 } else {
1537 // stack to reg
1538 if (dst.second()->is_stack()) {
1539 // stack -> reg, stack -> stack
1540 __ ld(FP, reg2offset(src.second()) + STACK_BIAS, L4);
1541 if (dst.first()->is_Register()) {
1542 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1543 } else {
1544 __ ldf(FloatRegisterImpl::S, FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_FloatRegister());
1545 }
1546 // This was missing. (very rare case)
1547 __ st(L4, SP, reg2offset(dst.second()) + STACK_BIAS);
1548 } else {
1549 // stack -> reg
1550 // Eventually optimize for alignment QQQ
1551 if (dst.first()->is_Register()) {
1552 __ ld(FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_Register());
1553 __ ld(FP, reg2offset(src.second()) + STACK_BIAS, dst.second()->as_Register());
1554 } else {
1555 __ ldf(FloatRegisterImpl::S, FP, reg2offset(src.first()) + STACK_BIAS, dst.first()->as_FloatRegister());
1556 __ ldf(FloatRegisterImpl::S, FP, reg2offset(src.second()) + STACK_BIAS, dst.second()->as_FloatRegister());
1557 }
1558 }
1559 }
1560 } else if (dst.first()->is_stack()) {
1561 // reg to stack
1562 if (src.first()->is_Register()) {
1563 // Eventually optimize for alignment QQQ
1564 __ st(src.first()->as_Register(), SP, reg2offset(dst.first()) + STACK_BIAS);
1565 if (src.second()->is_stack()) {
1566 __ ld(FP, reg2offset(src.second()) + STACK_BIAS, L4);
1567 __ st(L4, SP, reg2offset(dst.second()) + STACK_BIAS);
1568 } else {
1569 __ st(src.second()->as_Register(), SP, reg2offset(dst.second()) + STACK_BIAS);
1570 }
1571 } else {
1572 // fpr to stack
1573 if (src.second()->is_stack()) {
1574 ShouldNotReachHere();
1575 } else {
1576 // Is the stack aligned?
1577 if (reg2offset(dst.first()) & 0x7) {
1578 // No do as pairs
1579 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(), SP, reg2offset(dst.first()) + STACK_BIAS);
1580 __ stf(FloatRegisterImpl::S, src.second()->as_FloatRegister(), SP, reg2offset(dst.second()) + STACK_BIAS);
1581 } else {
1582 __ stf(FloatRegisterImpl::D, src.first()->as_FloatRegister(), SP, reg2offset(dst.first()) + STACK_BIAS);
1583 }
1584 }
1585 }
1586 } else {
1587 // reg to reg
1588 if (src.first()->is_Register()) {
1589 if (dst.first()->is_Register()) {
1590 // gpr -> gpr
1591 __ mov(src.first()->as_Register(), dst.first()->as_Register());
1592 __ mov(src.second()->as_Register(), dst.second()->as_Register());
1593 } else {
1594 // gpr -> fpr
1595 // ought to be able to do a single store
1596 __ stx(src.first()->as_Register(), FP, -8 + STACK_BIAS);
1597 __ stx(src.second()->as_Register(), FP, -4 + STACK_BIAS);
1598 // ought to be able to do a single load
1599 __ ldf(FloatRegisterImpl::S, FP, -8 + STACK_BIAS, dst.first()->as_FloatRegister());
1600 __ ldf(FloatRegisterImpl::S, FP, -4 + STACK_BIAS, dst.second()->as_FloatRegister());
1601 }
1602 } else if (dst.first()->is_Register()) {
1603 // fpr -> gpr
1604 // ought to be able to do a single store
1605 __ stf(FloatRegisterImpl::D, src.first()->as_FloatRegister(), FP, -8 + STACK_BIAS);
1606 // ought to be able to do a single load
1607 // REMEMBER first() is low address not LSB
1608 __ ld(FP, -8 + STACK_BIAS, dst.first()->as_Register());
1609 if (dst.second()->is_Register()) {
1610 __ ld(FP, -4 + STACK_BIAS, dst.second()->as_Register());
1611 } else {
1612 __ ld(FP, -4 + STACK_BIAS, L4);
1613 __ st(L4, SP, reg2offset(dst.second()) + STACK_BIAS);
1614 }
1615 } else {
1616 // fpr -> fpr
1617 // In theory these overlap but the ordering is such that this is likely a nop
1618 if ( src.first() != dst.first()) {
1619 __ fmov(FloatRegisterImpl::D, src.first()->as_FloatRegister(), dst.first()->as_FloatRegister());
1620 }
1621 }
1622 }
1623 }
1625 // Creates an inner frame if one hasn't already been created, and
1626 // saves a copy of the thread in L7_thread_cache
1627 static void create_inner_frame(MacroAssembler* masm, bool* already_created) {
1628 if (!*already_created) {
1629 __ save_frame(0);
1630 // Save thread in L7 (INNER FRAME); it crosses a bunch of VM calls below
1631 // Don't use save_thread because it smashes G2 and we merely want to save a
1632 // copy
1633 __ mov(G2_thread, L7_thread_cache);
1634 *already_created = true;
1635 }
1636 }
1639 static void save_or_restore_arguments(MacroAssembler* masm,
1640 const int stack_slots,
1641 const int total_in_args,
1642 const int arg_save_area,
1643 OopMap* map,
1644 VMRegPair* in_regs,
1645 BasicType* in_sig_bt) {
1646 // if map is non-NULL then the code should store the values,
1647 // otherwise it should load them.
1648 if (map != NULL) {
1649 // Fill in the map
1650 for (int i = 0; i < total_in_args; i++) {
1651 if (in_sig_bt[i] == T_ARRAY) {
1652 if (in_regs[i].first()->is_stack()) {
1653 int offset_in_older_frame = in_regs[i].first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1654 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + stack_slots));
1655 } else if (in_regs[i].first()->is_Register()) {
1656 map->set_oop(in_regs[i].first());
1657 } else {
1658 ShouldNotReachHere();
1659 }
1660 }
1661 }
1662 }
1664 // Save or restore double word values
1665 int handle_index = 0;
1666 for (int i = 0; i < total_in_args; i++) {
1667 int slot = handle_index + arg_save_area;
1668 int offset = slot * VMRegImpl::stack_slot_size;
1669 if (in_sig_bt[i] == T_LONG && in_regs[i].first()->is_Register()) {
1670 const Register reg = in_regs[i].first()->as_Register();
1671 if (reg->is_global()) {
1672 handle_index += 2;
1673 assert(handle_index <= stack_slots, "overflow");
1674 if (map != NULL) {
1675 __ stx(reg, SP, offset + STACK_BIAS);
1676 } else {
1677 __ ldx(SP, offset + STACK_BIAS, reg);
1678 }
1679 }
1680 } else if (in_sig_bt[i] == T_DOUBLE && in_regs[i].first()->is_FloatRegister()) {
1681 handle_index += 2;
1682 assert(handle_index <= stack_slots, "overflow");
1683 if (map != NULL) {
1684 __ stf(FloatRegisterImpl::D, in_regs[i].first()->as_FloatRegister(), SP, offset + STACK_BIAS);
1685 } else {
1686 __ ldf(FloatRegisterImpl::D, SP, offset + STACK_BIAS, in_regs[i].first()->as_FloatRegister());
1687 }
1688 }
1689 }
1690 // Save floats
1691 for (int i = 0; i < total_in_args; i++) {
1692 int slot = handle_index + arg_save_area;
1693 int offset = slot * VMRegImpl::stack_slot_size;
1694 if (in_sig_bt[i] == T_FLOAT && in_regs[i].first()->is_FloatRegister()) {
1695 handle_index++;
1696 assert(handle_index <= stack_slots, "overflow");
1697 if (map != NULL) {
1698 __ stf(FloatRegisterImpl::S, in_regs[i].first()->as_FloatRegister(), SP, offset + STACK_BIAS);
1699 } else {
1700 __ ldf(FloatRegisterImpl::S, SP, offset + STACK_BIAS, in_regs[i].first()->as_FloatRegister());
1701 }
1702 }
1703 }
1705 }
1708 // Check GC_locker::needs_gc and enter the runtime if it's true. This
1709 // keeps a new JNI critical region from starting until a GC has been
1710 // forced. Save down any oops in registers and describe them in an
1711 // OopMap.
1712 static void check_needs_gc_for_critical_native(MacroAssembler* masm,
1713 const int stack_slots,
1714 const int total_in_args,
1715 const int arg_save_area,
1716 OopMapSet* oop_maps,
1717 VMRegPair* in_regs,
1718 BasicType* in_sig_bt) {
1719 __ block_comment("check GC_locker::needs_gc");
1720 Label cont;
1721 AddressLiteral sync_state(GC_locker::needs_gc_address());
1722 __ load_bool_contents(sync_state, G3_scratch);
1723 __ cmp_zero_and_br(Assembler::equal, G3_scratch, cont);
1724 __ delayed()->nop();
1726 // Save down any values that are live in registers and call into the
1727 // runtime to halt for a GC
1728 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1729 save_or_restore_arguments(masm, stack_slots, total_in_args,
1730 arg_save_area, map, in_regs, in_sig_bt);
1732 __ mov(G2_thread, L7_thread_cache);
1734 __ set_last_Java_frame(SP, noreg);
1736 __ block_comment("block_for_jni_critical");
1737 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::block_for_jni_critical), relocInfo::runtime_call_type);
1738 __ delayed()->mov(L7_thread_cache, O0);
1739 oop_maps->add_gc_map( __ offset(), map);
1741 __ restore_thread(L7_thread_cache); // restore G2_thread
1742 __ reset_last_Java_frame();
1744 // Reload all the register arguments
1745 save_or_restore_arguments(masm, stack_slots, total_in_args,
1746 arg_save_area, NULL, in_regs, in_sig_bt);
1748 __ bind(cont);
1749 #ifdef ASSERT
1750 if (StressCriticalJNINatives) {
1751 // Stress register saving
1752 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1753 save_or_restore_arguments(masm, stack_slots, total_in_args,
1754 arg_save_area, map, in_regs, in_sig_bt);
1755 // Destroy argument registers
1756 for (int i = 0; i < total_in_args; i++) {
1757 if (in_regs[i].first()->is_Register()) {
1758 const Register reg = in_regs[i].first()->as_Register();
1759 if (reg->is_global()) {
1760 __ mov(G0, reg);
1761 }
1762 } else if (in_regs[i].first()->is_FloatRegister()) {
1763 __ fneg(FloatRegisterImpl::D, in_regs[i].first()->as_FloatRegister(), in_regs[i].first()->as_FloatRegister());
1764 }
1765 }
1767 save_or_restore_arguments(masm, stack_slots, total_in_args,
1768 arg_save_area, NULL, in_regs, in_sig_bt);
1769 }
1770 #endif
1771 }
1773 // Unpack an array argument into a pointer to the body and the length
1774 // if the array is non-null, otherwise pass 0 for both.
1775 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) {
1776 // Pass the length, ptr pair
1777 Label is_null, done;
1778 if (reg.first()->is_stack()) {
1779 VMRegPair tmp = reg64_to_VMRegPair(L2);
1780 // Load the arg up from the stack
1781 move_ptr(masm, reg, tmp);
1782 reg = tmp;
1783 }
1784 __ cmp(reg.first()->as_Register(), G0);
1785 __ brx(Assembler::equal, false, Assembler::pt, is_null);
1786 __ delayed()->add(reg.first()->as_Register(), arrayOopDesc::base_offset_in_bytes(in_elem_type), L4);
1787 move_ptr(masm, reg64_to_VMRegPair(L4), body_arg);
1788 __ ld(reg.first()->as_Register(), arrayOopDesc::length_offset_in_bytes(), L4);
1789 move32_64(masm, reg64_to_VMRegPair(L4), length_arg);
1790 __ ba_short(done);
1791 __ bind(is_null);
1792 // Pass zeros
1793 move_ptr(masm, reg64_to_VMRegPair(G0), body_arg);
1794 move32_64(masm, reg64_to_VMRegPair(G0), length_arg);
1795 __ bind(done);
1796 }
1798 static void verify_oop_args(MacroAssembler* masm,
1799 methodHandle method,
1800 const BasicType* sig_bt,
1801 const VMRegPair* regs) {
1802 Register temp_reg = G5_method; // not part of any compiled calling seq
1803 if (VerifyOops) {
1804 for (int i = 0; i < method->size_of_parameters(); i++) {
1805 if (sig_bt[i] == T_OBJECT ||
1806 sig_bt[i] == T_ARRAY) {
1807 VMReg r = regs[i].first();
1808 assert(r->is_valid(), "bad oop arg");
1809 if (r->is_stack()) {
1810 RegisterOrConstant ld_off = reg2offset(r) + STACK_BIAS;
1811 ld_off = __ ensure_simm13_or_reg(ld_off, temp_reg);
1812 __ ld_ptr(SP, ld_off, temp_reg);
1813 __ verify_oop(temp_reg);
1814 } else {
1815 __ verify_oop(r->as_Register());
1816 }
1817 }
1818 }
1819 }
1820 }
1822 static void gen_special_dispatch(MacroAssembler* masm,
1823 methodHandle method,
1824 const BasicType* sig_bt,
1825 const VMRegPair* regs) {
1826 verify_oop_args(masm, method, sig_bt, regs);
1827 vmIntrinsics::ID iid = method->intrinsic_id();
1829 // Now write the args into the outgoing interpreter space
1830 bool has_receiver = false;
1831 Register receiver_reg = noreg;
1832 int member_arg_pos = -1;
1833 Register member_reg = noreg;
1834 int ref_kind = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid);
1835 if (ref_kind != 0) {
1836 member_arg_pos = method->size_of_parameters() - 1; // trailing MemberName argument
1837 member_reg = G5_method; // known to be free at this point
1838 has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind);
1839 } else if (iid == vmIntrinsics::_invokeBasic) {
1840 has_receiver = true;
1841 } else {
1842 fatal(err_msg_res("unexpected intrinsic id %d", iid));
1843 }
1845 if (member_reg != noreg) {
1846 // Load the member_arg into register, if necessary.
1847 SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs);
1848 VMReg r = regs[member_arg_pos].first();
1849 if (r->is_stack()) {
1850 RegisterOrConstant ld_off = reg2offset(r) + STACK_BIAS;
1851 ld_off = __ ensure_simm13_or_reg(ld_off, member_reg);
1852 __ ld_ptr(SP, ld_off, member_reg);
1853 } else {
1854 // no data motion is needed
1855 member_reg = r->as_Register();
1856 }
1857 }
1859 if (has_receiver) {
1860 // Make sure the receiver is loaded into a register.
1861 assert(method->size_of_parameters() > 0, "oob");
1862 assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object");
1863 VMReg r = regs[0].first();
1864 assert(r->is_valid(), "bad receiver arg");
1865 if (r->is_stack()) {
1866 // Porting note: This assumes that compiled calling conventions always
1867 // pass the receiver oop in a register. If this is not true on some
1868 // platform, pick a temp and load the receiver from stack.
1869 fatal("receiver always in a register");
1870 receiver_reg = G3_scratch; // known to be free at this point
1871 RegisterOrConstant ld_off = reg2offset(r) + STACK_BIAS;
1872 ld_off = __ ensure_simm13_or_reg(ld_off, member_reg);
1873 __ ld_ptr(SP, ld_off, receiver_reg);
1874 } else {
1875 // no data motion is needed
1876 receiver_reg = r->as_Register();
1877 }
1878 }
1880 // Figure out which address we are really jumping to:
1881 MethodHandles::generate_method_handle_dispatch(masm, iid,
1882 receiver_reg, member_reg, /*for_compiler_entry:*/ true);
1883 }
1885 // ---------------------------------------------------------------------------
1886 // Generate a native wrapper for a given method. The method takes arguments
1887 // in the Java compiled code convention, marshals them to the native
1888 // convention (handlizes oops, etc), transitions to native, makes the call,
1889 // returns to java state (possibly blocking), unhandlizes any result and
1890 // returns.
1891 //
1892 // Critical native functions are a shorthand for the use of
1893 // GetPrimtiveArrayCritical and disallow the use of any other JNI
1894 // functions. The wrapper is expected to unpack the arguments before
1895 // passing them to the callee and perform checks before and after the
1896 // native call to ensure that they GC_locker
1897 // lock_critical/unlock_critical semantics are followed. Some other
1898 // parts of JNI setup are skipped like the tear down of the JNI handle
1899 // block and the check for pending exceptions it's impossible for them
1900 // to be thrown.
1901 //
1902 // They are roughly structured like this:
1903 // if (GC_locker::needs_gc())
1904 // SharedRuntime::block_for_jni_critical();
1905 // tranistion to thread_in_native
1906 // unpack arrray arguments and call native entry point
1907 // check for safepoint in progress
1908 // check if any thread suspend flags are set
1909 // call into JVM and possible unlock the JNI critical
1910 // if a GC was suppressed while in the critical native.
1911 // transition back to thread_in_Java
1912 // return to caller
1913 //
1914 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm,
1915 methodHandle method,
1916 int compile_id,
1917 BasicType* in_sig_bt,
1918 VMRegPair* in_regs,
1919 BasicType ret_type) {
1920 if (method->is_method_handle_intrinsic()) {
1921 vmIntrinsics::ID iid = method->intrinsic_id();
1922 intptr_t start = (intptr_t)__ pc();
1923 int vep_offset = ((intptr_t)__ pc()) - start;
1924 gen_special_dispatch(masm,
1925 method,
1926 in_sig_bt,
1927 in_regs);
1928 int frame_complete = ((intptr_t)__ pc()) - start; // not complete, period
1929 __ flush();
1930 int stack_slots = SharedRuntime::out_preserve_stack_slots(); // no out slots at all, actually
1931 return nmethod::new_native_nmethod(method,
1932 compile_id,
1933 masm->code(),
1934 vep_offset,
1935 frame_complete,
1936 stack_slots / VMRegImpl::slots_per_word,
1937 in_ByteSize(-1),
1938 in_ByteSize(-1),
1939 (OopMapSet*)NULL);
1940 }
1941 bool is_critical_native = true;
1942 address native_func = method->critical_native_function();
1943 if (native_func == NULL) {
1944 native_func = method->native_function();
1945 is_critical_native = false;
1946 }
1947 assert(native_func != NULL, "must have function");
1949 // Native nmethod wrappers never take possesion of the oop arguments.
1950 // So the caller will gc the arguments. The only thing we need an
1951 // oopMap for is if the call is static
1952 //
1953 // An OopMap for lock (and class if static), and one for the VM call itself
1954 OopMapSet *oop_maps = new OopMapSet();
1955 intptr_t start = (intptr_t)__ pc();
1957 // First thing make an ic check to see if we should even be here
1958 {
1959 Label L;
1960 const Register temp_reg = G3_scratch;
1961 AddressLiteral ic_miss(SharedRuntime::get_ic_miss_stub());
1962 __ verify_oop(O0);
1963 __ load_klass(O0, temp_reg);
1964 __ cmp_and_brx_short(temp_reg, G5_inline_cache_reg, Assembler::equal, Assembler::pt, L);
1966 __ jump_to(ic_miss, temp_reg);
1967 __ delayed()->nop();
1968 __ align(CodeEntryAlignment);
1969 __ bind(L);
1970 }
1972 int vep_offset = ((intptr_t)__ pc()) - start;
1974 #ifdef COMPILER1
1975 if (InlineObjectHash && method->intrinsic_id() == vmIntrinsics::_hashCode) {
1976 // Object.hashCode can pull the hashCode from the header word
1977 // instead of doing a full VM transition once it's been computed.
1978 // Since hashCode is usually polymorphic at call sites we can't do
1979 // this optimization at the call site without a lot of work.
1980 Label slowCase;
1981 Register receiver = O0;
1982 Register result = O0;
1983 Register header = G3_scratch;
1984 Register hash = G3_scratch; // overwrite header value with hash value
1985 Register mask = G1; // to get hash field from header
1987 // Read the header and build a mask to get its hash field. Give up if the object is not unlocked.
1988 // We depend on hash_mask being at most 32 bits and avoid the use of
1989 // hash_mask_in_place because it could be larger than 32 bits in a 64-bit
1990 // vm: see markOop.hpp.
1991 __ ld_ptr(receiver, oopDesc::mark_offset_in_bytes(), header);
1992 __ sethi(markOopDesc::hash_mask, mask);
1993 __ btst(markOopDesc::unlocked_value, header);
1994 __ br(Assembler::zero, false, Assembler::pn, slowCase);
1995 if (UseBiasedLocking) {
1996 // Check if biased and fall through to runtime if so
1997 __ delayed()->nop();
1998 __ btst(markOopDesc::biased_lock_bit_in_place, header);
1999 __ br(Assembler::notZero, false, Assembler::pn, slowCase);
2000 }
2001 __ delayed()->or3(mask, markOopDesc::hash_mask & 0x3ff, mask);
2003 // Check for a valid (non-zero) hash code and get its value.
2004 #ifdef _LP64
2005 __ srlx(header, markOopDesc::hash_shift, hash);
2006 #else
2007 __ srl(header, markOopDesc::hash_shift, hash);
2008 #endif
2009 __ andcc(hash, mask, hash);
2010 __ br(Assembler::equal, false, Assembler::pn, slowCase);
2011 __ delayed()->nop();
2013 // leaf return.
2014 __ retl();
2015 __ delayed()->mov(hash, result);
2016 __ bind(slowCase);
2017 }
2018 #endif // COMPILER1
2021 // We have received a description of where all the java arg are located
2022 // on entry to the wrapper. We need to convert these args to where
2023 // the jni function will expect them. To figure out where they go
2024 // we convert the java signature to a C signature by inserting
2025 // the hidden arguments as arg[0] and possibly arg[1] (static method)
2027 const int total_in_args = method->size_of_parameters();
2028 int total_c_args = total_in_args;
2029 int total_save_slots = 6 * VMRegImpl::slots_per_word;
2030 if (!is_critical_native) {
2031 total_c_args += 1;
2032 if (method->is_static()) {
2033 total_c_args++;
2034 }
2035 } else {
2036 for (int i = 0; i < total_in_args; i++) {
2037 if (in_sig_bt[i] == T_ARRAY) {
2038 // These have to be saved and restored across the safepoint
2039 total_c_args++;
2040 }
2041 }
2042 }
2044 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
2045 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
2046 BasicType* in_elem_bt = NULL;
2048 int argc = 0;
2049 if (!is_critical_native) {
2050 out_sig_bt[argc++] = T_ADDRESS;
2051 if (method->is_static()) {
2052 out_sig_bt[argc++] = T_OBJECT;
2053 }
2055 for (int i = 0; i < total_in_args ; i++ ) {
2056 out_sig_bt[argc++] = in_sig_bt[i];
2057 }
2058 } else {
2059 Thread* THREAD = Thread::current();
2060 in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args);
2061 SignatureStream ss(method->signature());
2062 for (int i = 0; i < total_in_args ; i++ ) {
2063 if (in_sig_bt[i] == T_ARRAY) {
2064 // Arrays are passed as int, elem* pair
2065 out_sig_bt[argc++] = T_INT;
2066 out_sig_bt[argc++] = T_ADDRESS;
2067 Symbol* atype = ss.as_symbol(CHECK_NULL);
2068 const char* at = atype->as_C_string();
2069 if (strlen(at) == 2) {
2070 assert(at[0] == '[', "must be");
2071 switch (at[1]) {
2072 case 'B': in_elem_bt[i] = T_BYTE; break;
2073 case 'C': in_elem_bt[i] = T_CHAR; break;
2074 case 'D': in_elem_bt[i] = T_DOUBLE; break;
2075 case 'F': in_elem_bt[i] = T_FLOAT; break;
2076 case 'I': in_elem_bt[i] = T_INT; break;
2077 case 'J': in_elem_bt[i] = T_LONG; break;
2078 case 'S': in_elem_bt[i] = T_SHORT; break;
2079 case 'Z': in_elem_bt[i] = T_BOOLEAN; break;
2080 default: ShouldNotReachHere();
2081 }
2082 }
2083 } else {
2084 out_sig_bt[argc++] = in_sig_bt[i];
2085 in_elem_bt[i] = T_VOID;
2086 }
2087 if (in_sig_bt[i] != T_VOID) {
2088 assert(in_sig_bt[i] == ss.type(), "must match");
2089 ss.next();
2090 }
2091 }
2092 }
2094 // Now figure out where the args must be stored and how much stack space
2095 // they require (neglecting out_preserve_stack_slots but space for storing
2096 // the 1st six register arguments). It's weird see int_stk_helper.
2097 //
2098 int out_arg_slots;
2099 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);
2101 if (is_critical_native) {
2102 // Critical natives may have to call out so they need a save area
2103 // for register arguments.
2104 int double_slots = 0;
2105 int single_slots = 0;
2106 for ( int i = 0; i < total_in_args; i++) {
2107 if (in_regs[i].first()->is_Register()) {
2108 const Register reg = in_regs[i].first()->as_Register();
2109 switch (in_sig_bt[i]) {
2110 case T_ARRAY:
2111 case T_BOOLEAN:
2112 case T_BYTE:
2113 case T_SHORT:
2114 case T_CHAR:
2115 case T_INT: assert(reg->is_in(), "don't need to save these"); break;
2116 case T_LONG: if (reg->is_global()) double_slots++; break;
2117 default: ShouldNotReachHere();
2118 }
2119 } else if (in_regs[i].first()->is_FloatRegister()) {
2120 switch (in_sig_bt[i]) {
2121 case T_FLOAT: single_slots++; break;
2122 case T_DOUBLE: double_slots++; break;
2123 default: ShouldNotReachHere();
2124 }
2125 }
2126 }
2127 total_save_slots = double_slots * 2 + single_slots;
2128 }
2130 // Compute framesize for the wrapper. We need to handlize all oops in
2131 // registers. We must create space for them here that is disjoint from
2132 // the windowed save area because we have no control over when we might
2133 // flush the window again and overwrite values that gc has since modified.
2134 // (The live window race)
2135 //
2136 // We always just allocate 6 word for storing down these object. This allow
2137 // us to simply record the base and use the Ireg number to decide which
2138 // slot to use. (Note that the reg number is the inbound number not the
2139 // outbound number).
2140 // We must shuffle args to match the native convention, and include var-args space.
2142 // Calculate the total number of stack slots we will need.
2144 // First count the abi requirement plus all of the outgoing args
2145 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
2147 // Now the space for the inbound oop handle area
2149 int oop_handle_offset = round_to(stack_slots, 2);
2150 stack_slots += total_save_slots;
2152 // Now any space we need for handlizing a klass if static method
2154 int klass_slot_offset = 0;
2155 int klass_offset = -1;
2156 int lock_slot_offset = 0;
2157 bool is_static = false;
2159 if (method->is_static()) {
2160 klass_slot_offset = stack_slots;
2161 stack_slots += VMRegImpl::slots_per_word;
2162 klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
2163 is_static = true;
2164 }
2166 // Plus a lock if needed
2168 if (method->is_synchronized()) {
2169 lock_slot_offset = stack_slots;
2170 stack_slots += VMRegImpl::slots_per_word;
2171 }
2173 // Now a place to save return value or as a temporary for any gpr -> fpr moves
2174 stack_slots += 2;
2176 // Ok The space we have allocated will look like:
2177 //
2178 //
2179 // FP-> | |
2180 // |---------------------|
2181 // | 2 slots for moves |
2182 // |---------------------|
2183 // | lock box (if sync) |
2184 // |---------------------| <- lock_slot_offset
2185 // | klass (if static) |
2186 // |---------------------| <- klass_slot_offset
2187 // | oopHandle area |
2188 // |---------------------| <- oop_handle_offset
2189 // | outbound memory |
2190 // | based arguments |
2191 // | |
2192 // |---------------------|
2193 // | vararg area |
2194 // |---------------------|
2195 // | |
2196 // SP-> | out_preserved_slots |
2197 //
2198 //
2201 // Now compute actual number of stack words we need rounding to make
2202 // stack properly aligned.
2203 stack_slots = round_to(stack_slots, 2 * VMRegImpl::slots_per_word);
2205 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
2207 // Generate stack overflow check before creating frame
2208 __ generate_stack_overflow_check(stack_size);
2210 // Generate a new frame for the wrapper.
2211 __ save(SP, -stack_size, SP);
2213 int frame_complete = ((intptr_t)__ pc()) - start;
2215 __ verify_thread();
2217 if (is_critical_native) {
2218 check_needs_gc_for_critical_native(masm, stack_slots, total_in_args,
2219 oop_handle_offset, oop_maps, in_regs, in_sig_bt);
2220 }
2222 //
2223 // We immediately shuffle the arguments so that any vm call we have to
2224 // make from here on out (sync slow path, jvmti, etc.) we will have
2225 // captured the oops from our caller and have a valid oopMap for
2226 // them.
2228 // -----------------
2229 // The Grand Shuffle
2230 //
2231 // Natives require 1 or 2 extra arguments over the normal ones: the JNIEnv*
2232 // (derived from JavaThread* which is in L7_thread_cache) and, if static,
2233 // the class mirror instead of a receiver. This pretty much guarantees that
2234 // register layout will not match. We ignore these extra arguments during
2235 // the shuffle. The shuffle is described by the two calling convention
2236 // vectors we have in our possession. We simply walk the java vector to
2237 // get the source locations and the c vector to get the destinations.
2238 // Because we have a new window and the argument registers are completely
2239 // disjoint ( I0 -> O1, I1 -> O2, ...) we have nothing to worry about
2240 // here.
2242 // This is a trick. We double the stack slots so we can claim
2243 // the oops in the caller's frame. Since we are sure to have
2244 // more args than the caller doubling is enough to make
2245 // sure we can capture all the incoming oop args from the
2246 // caller.
2247 //
2248 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
2249 // Record sp-based slot for receiver on stack for non-static methods
2250 int receiver_offset = -1;
2252 // We move the arguments backward because the floating point registers
2253 // destination will always be to a register with a greater or equal register
2254 // number or the stack.
2256 #ifdef ASSERT
2257 bool reg_destroyed[RegisterImpl::number_of_registers];
2258 bool freg_destroyed[FloatRegisterImpl::number_of_registers];
2259 for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {
2260 reg_destroyed[r] = false;
2261 }
2262 for ( int f = 0 ; f < FloatRegisterImpl::number_of_registers ; f++ ) {
2263 freg_destroyed[f] = false;
2264 }
2266 #endif /* ASSERT */
2268 for ( int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0 ; i--, c_arg-- ) {
2270 #ifdef ASSERT
2271 if (in_regs[i].first()->is_Register()) {
2272 assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "ack!");
2273 } else if (in_regs[i].first()->is_FloatRegister()) {
2274 assert(!freg_destroyed[in_regs[i].first()->as_FloatRegister()->encoding(FloatRegisterImpl::S)], "ack!");
2275 }
2276 if (out_regs[c_arg].first()->is_Register()) {
2277 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
2278 } else if (out_regs[c_arg].first()->is_FloatRegister()) {
2279 freg_destroyed[out_regs[c_arg].first()->as_FloatRegister()->encoding(FloatRegisterImpl::S)] = true;
2280 }
2281 #endif /* ASSERT */
2283 switch (in_sig_bt[i]) {
2284 case T_ARRAY:
2285 if (is_critical_native) {
2286 unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg], out_regs[c_arg - 1]);
2287 c_arg--;
2288 break;
2289 }
2290 case T_OBJECT:
2291 assert(!is_critical_native, "no oop arguments");
2292 object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
2293 ((i == 0) && (!is_static)),
2294 &receiver_offset);
2295 break;
2296 case T_VOID:
2297 break;
2299 case T_FLOAT:
2300 float_move(masm, in_regs[i], out_regs[c_arg]);
2301 break;
2303 case T_DOUBLE:
2304 assert( i + 1 < total_in_args &&
2305 in_sig_bt[i + 1] == T_VOID &&
2306 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
2307 double_move(masm, in_regs[i], out_regs[c_arg]);
2308 break;
2310 case T_LONG :
2311 long_move(masm, in_regs[i], out_regs[c_arg]);
2312 break;
2314 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
2316 default:
2317 move32_64(masm, in_regs[i], out_regs[c_arg]);
2318 }
2319 }
2321 // Pre-load a static method's oop into O1. Used both by locking code and
2322 // the normal JNI call code.
2323 if (method->is_static() && !is_critical_native) {
2324 __ set_oop_constant(JNIHandles::make_local(method->method_holder()->java_mirror()), O1);
2326 // Now handlize the static class mirror in O1. It's known not-null.
2327 __ st_ptr(O1, SP, klass_offset + STACK_BIAS);
2328 map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
2329 __ add(SP, klass_offset + STACK_BIAS, O1);
2330 }
2333 const Register L6_handle = L6;
2335 if (method->is_synchronized()) {
2336 assert(!is_critical_native, "unhandled");
2337 __ mov(O1, L6_handle);
2338 }
2340 // We have all of the arguments setup at this point. We MUST NOT touch any Oregs
2341 // except O6/O7. So if we must call out we must push a new frame. We immediately
2342 // push a new frame and flush the windows.
2343 #ifdef _LP64
2344 intptr_t thepc = (intptr_t) __ pc();
2345 {
2346 address here = __ pc();
2347 // Call the next instruction
2348 __ call(here + 8, relocInfo::none);
2349 __ delayed()->nop();
2350 }
2351 #else
2352 intptr_t thepc = __ load_pc_address(O7, 0);
2353 #endif /* _LP64 */
2355 // We use the same pc/oopMap repeatedly when we call out
2356 oop_maps->add_gc_map(thepc - start, map);
2358 // O7 now has the pc loaded that we will use when we finally call to native.
2360 // Save thread in L7; it crosses a bunch of VM calls below
2361 // Don't use save_thread because it smashes G2 and we merely
2362 // want to save a copy
2363 __ mov(G2_thread, L7_thread_cache);
2366 // If we create an inner frame once is plenty
2367 // when we create it we must also save G2_thread
2368 bool inner_frame_created = false;
2370 // dtrace method entry support
2371 {
2372 SkipIfEqual skip_if(
2373 masm, G3_scratch, &DTraceMethodProbes, Assembler::zero);
2374 // create inner frame
2375 __ save_frame(0);
2376 __ mov(G2_thread, L7_thread_cache);
2377 __ set_metadata_constant(method(), O1);
2378 __ call_VM_leaf(L7_thread_cache,
2379 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
2380 G2_thread, O1);
2381 __ restore();
2382 }
2384 // RedefineClasses() tracing support for obsolete method entry
2385 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
2386 // create inner frame
2387 __ save_frame(0);
2388 __ mov(G2_thread, L7_thread_cache);
2389 __ set_metadata_constant(method(), O1);
2390 __ call_VM_leaf(L7_thread_cache,
2391 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
2392 G2_thread, O1);
2393 __ restore();
2394 }
2396 // We are in the jni frame unless saved_frame is true in which case
2397 // we are in one frame deeper (the "inner" frame). If we are in the
2398 // "inner" frames the args are in the Iregs and if the jni frame then
2399 // they are in the Oregs.
2400 // If we ever need to go to the VM (for locking, jvmti) then
2401 // we will always be in the "inner" frame.
2403 // Lock a synchronized method
2404 int lock_offset = -1; // Set if locked
2405 if (method->is_synchronized()) {
2406 Register Roop = O1;
2407 const Register L3_box = L3;
2409 create_inner_frame(masm, &inner_frame_created);
2411 __ ld_ptr(I1, 0, O1);
2412 Label done;
2414 lock_offset = (lock_slot_offset * VMRegImpl::stack_slot_size);
2415 __ add(FP, lock_offset+STACK_BIAS, L3_box);
2416 #ifdef ASSERT
2417 if (UseBiasedLocking) {
2418 // making the box point to itself will make it clear it went unused
2419 // but also be obviously invalid
2420 __ st_ptr(L3_box, L3_box, 0);
2421 }
2422 #endif // ASSERT
2423 //
2424 // Compiler_lock_object (Roop, Rmark, Rbox, Rscratch) -- kills Rmark, Rbox, Rscratch
2425 //
2426 __ compiler_lock_object(Roop, L1, L3_box, L2);
2427 __ br(Assembler::equal, false, Assembler::pt, done);
2428 __ delayed() -> add(FP, lock_offset+STACK_BIAS, L3_box);
2431 // None of the above fast optimizations worked so we have to get into the
2432 // slow case of monitor enter. Inline a special case of call_VM that
2433 // disallows any pending_exception.
2434 __ mov(Roop, O0); // Need oop in O0
2435 __ mov(L3_box, O1);
2437 // Record last_Java_sp, in case the VM code releases the JVM lock.
2439 __ set_last_Java_frame(FP, I7);
2441 // do the call
2442 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), relocInfo::runtime_call_type);
2443 __ delayed()->mov(L7_thread_cache, O2);
2445 __ restore_thread(L7_thread_cache); // restore G2_thread
2446 __ reset_last_Java_frame();
2448 #ifdef ASSERT
2449 { Label L;
2450 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), O0);
2451 __ br_null_short(O0, Assembler::pt, L);
2452 __ stop("no pending exception allowed on exit from IR::monitorenter");
2453 __ bind(L);
2454 }
2455 #endif
2456 __ bind(done);
2457 }
2460 // Finally just about ready to make the JNI call
2462 __ flush_windows();
2463 if (inner_frame_created) {
2464 __ restore();
2465 } else {
2466 // Store only what we need from this frame
2467 // QQQ I think that non-v9 (like we care) we don't need these saves
2468 // either as the flush traps and the current window goes too.
2469 __ st_ptr(FP, SP, FP->sp_offset_in_saved_window()*wordSize + STACK_BIAS);
2470 __ st_ptr(I7, SP, I7->sp_offset_in_saved_window()*wordSize + STACK_BIAS);
2471 }
2473 // get JNIEnv* which is first argument to native
2474 if (!is_critical_native) {
2475 __ add(G2_thread, in_bytes(JavaThread::jni_environment_offset()), O0);
2476 }
2478 // Use that pc we placed in O7 a while back as the current frame anchor
2479 __ set_last_Java_frame(SP, O7);
2481 // We flushed the windows ages ago now mark them as flushed before transitioning.
2482 __ set(JavaFrameAnchor::flushed, G3_scratch);
2483 __ st(G3_scratch, G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset());
2485 // Transition from _thread_in_Java to _thread_in_native.
2486 __ set(_thread_in_native, G3_scratch);
2488 #ifdef _LP64
2489 AddressLiteral dest(native_func);
2490 __ relocate(relocInfo::runtime_call_type);
2491 __ jumpl_to(dest, O7, O7);
2492 #else
2493 __ call(native_func, relocInfo::runtime_call_type);
2494 #endif
2495 __ delayed()->st(G3_scratch, G2_thread, JavaThread::thread_state_offset());
2497 __ restore_thread(L7_thread_cache); // restore G2_thread
2499 // Unpack native results. For int-types, we do any needed sign-extension
2500 // and move things into I0. The return value there will survive any VM
2501 // calls for blocking or unlocking. An FP or OOP result (handle) is done
2502 // specially in the slow-path code.
2503 switch (ret_type) {
2504 case T_VOID: break; // Nothing to do!
2505 case T_FLOAT: break; // Got it where we want it (unless slow-path)
2506 case T_DOUBLE: break; // Got it where we want it (unless slow-path)
2507 // In 64 bits build result is in O0, in O0, O1 in 32bit build
2508 case T_LONG:
2509 #ifndef _LP64
2510 __ mov(O1, I1);
2511 #endif
2512 // Fall thru
2513 case T_OBJECT: // Really a handle
2514 case T_ARRAY:
2515 case T_INT:
2516 __ mov(O0, I0);
2517 break;
2518 case T_BOOLEAN: __ subcc(G0, O0, G0); __ addc(G0, 0, I0); break; // !0 => true; 0 => false
2519 case T_BYTE : __ sll(O0, 24, O0); __ sra(O0, 24, I0); break;
2520 case T_CHAR : __ sll(O0, 16, O0); __ srl(O0, 16, I0); break; // cannot use and3, 0xFFFF too big as immediate value!
2521 case T_SHORT : __ sll(O0, 16, O0); __ sra(O0, 16, I0); break;
2522 break; // Cannot de-handlize until after reclaiming jvm_lock
2523 default:
2524 ShouldNotReachHere();
2525 }
2527 Label after_transition;
2528 // must we block?
2530 // Block, if necessary, before resuming in _thread_in_Java state.
2531 // In order for GC to work, don't clear the last_Java_sp until after blocking.
2532 { Label no_block;
2533 AddressLiteral sync_state(SafepointSynchronize::address_of_state());
2535 // Switch thread to "native transition" state before reading the synchronization state.
2536 // This additional state is necessary because reading and testing the synchronization
2537 // state is not atomic w.r.t. GC, as this scenario demonstrates:
2538 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
2539 // VM thread changes sync state to synchronizing and suspends threads for GC.
2540 // Thread A is resumed to finish this native method, but doesn't block here since it
2541 // didn't see any synchronization is progress, and escapes.
2542 __ set(_thread_in_native_trans, G3_scratch);
2543 __ st(G3_scratch, G2_thread, JavaThread::thread_state_offset());
2544 if(os::is_MP()) {
2545 if (UseMembar) {
2546 // Force this write out before the read below
2547 __ membar(Assembler::StoreLoad);
2548 } else {
2549 // Write serialization page so VM thread can do a pseudo remote membar.
2550 // We use the current thread pointer to calculate a thread specific
2551 // offset to write to within the page. This minimizes bus traffic
2552 // due to cache line collision.
2553 __ serialize_memory(G2_thread, G1_scratch, G3_scratch);
2554 }
2555 }
2556 __ load_contents(sync_state, G3_scratch);
2557 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
2559 Label L;
2560 Address suspend_state(G2_thread, JavaThread::suspend_flags_offset());
2561 __ br(Assembler::notEqual, false, Assembler::pn, L);
2562 __ delayed()->ld(suspend_state, G3_scratch);
2563 __ cmp_and_br_short(G3_scratch, 0, Assembler::equal, Assembler::pt, no_block);
2564 __ bind(L);
2566 // Block. Save any potential method result value before the operation and
2567 // use a leaf call to leave the last_Java_frame setup undisturbed. Doing this
2568 // lets us share the oopMap we used when we went native rather the create
2569 // a distinct one for this pc
2570 //
2571 save_native_result(masm, ret_type, stack_slots);
2572 if (!is_critical_native) {
2573 __ call_VM_leaf(L7_thread_cache,
2574 CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans),
2575 G2_thread);
2576 } else {
2577 __ call_VM_leaf(L7_thread_cache,
2578 CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans_and_transition),
2579 G2_thread);
2580 }
2582 // Restore any method result value
2583 restore_native_result(masm, ret_type, stack_slots);
2585 if (is_critical_native) {
2586 // The call above performed the transition to thread_in_Java so
2587 // skip the transition logic below.
2588 __ ba(after_transition);
2589 __ delayed()->nop();
2590 }
2592 __ bind(no_block);
2593 }
2595 // thread state is thread_in_native_trans. Any safepoint blocking has already
2596 // happened so we can now change state to _thread_in_Java.
2597 __ set(_thread_in_Java, G3_scratch);
2598 __ st(G3_scratch, G2_thread, JavaThread::thread_state_offset());
2599 __ bind(after_transition);
2601 Label no_reguard;
2602 __ ld(G2_thread, JavaThread::stack_guard_state_offset(), G3_scratch);
2603 __ cmp_and_br_short(G3_scratch, JavaThread::stack_guard_yellow_disabled, Assembler::notEqual, Assembler::pt, no_reguard);
2605 save_native_result(masm, ret_type, stack_slots);
2606 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages));
2607 __ delayed()->nop();
2609 __ restore_thread(L7_thread_cache); // restore G2_thread
2610 restore_native_result(masm, ret_type, stack_slots);
2612 __ bind(no_reguard);
2614 // Handle possible exception (will unlock if necessary)
2616 // native result if any is live in freg or I0 (and I1 if long and 32bit vm)
2618 // Unlock
2619 if (method->is_synchronized()) {
2620 Label done;
2621 Register I2_ex_oop = I2;
2622 const Register L3_box = L3;
2623 // Get locked oop from the handle we passed to jni
2624 __ ld_ptr(L6_handle, 0, L4);
2625 __ add(SP, lock_offset+STACK_BIAS, L3_box);
2626 // Must save pending exception around the slow-path VM call. Since it's a
2627 // leaf call, the pending exception (if any) can be kept in a register.
2628 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), I2_ex_oop);
2629 // Now unlock
2630 // (Roop, Rmark, Rbox, Rscratch)
2631 __ compiler_unlock_object(L4, L1, L3_box, L2);
2632 __ br(Assembler::equal, false, Assembler::pt, done);
2633 __ delayed()-> add(SP, lock_offset+STACK_BIAS, L3_box);
2635 // save and restore any potential method result value around the unlocking
2636 // operation. Will save in I0 (or stack for FP returns).
2637 save_native_result(masm, ret_type, stack_slots);
2639 // Must clear pending-exception before re-entering the VM. Since this is
2640 // a leaf call, pending-exception-oop can be safely kept in a register.
2641 __ st_ptr(G0, G2_thread, in_bytes(Thread::pending_exception_offset()));
2643 // slow case of monitor enter. Inline a special case of call_VM that
2644 // disallows any pending_exception.
2645 __ mov(L3_box, O1);
2647 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C), relocInfo::runtime_call_type);
2648 __ delayed()->mov(L4, O0); // Need oop in O0
2650 __ restore_thread(L7_thread_cache); // restore G2_thread
2652 #ifdef ASSERT
2653 { Label L;
2654 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), O0);
2655 __ br_null_short(O0, Assembler::pt, L);
2656 __ stop("no pending exception allowed on exit from IR::monitorexit");
2657 __ bind(L);
2658 }
2659 #endif
2660 restore_native_result(masm, ret_type, stack_slots);
2661 // check_forward_pending_exception jump to forward_exception if any pending
2662 // exception is set. The forward_exception routine expects to see the
2663 // exception in pending_exception and not in a register. Kind of clumsy,
2664 // since all folks who branch to forward_exception must have tested
2665 // pending_exception first and hence have it in a register already.
2666 __ st_ptr(I2_ex_oop, G2_thread, in_bytes(Thread::pending_exception_offset()));
2667 __ bind(done);
2668 }
2670 // Tell dtrace about this method exit
2671 {
2672 SkipIfEqual skip_if(
2673 masm, G3_scratch, &DTraceMethodProbes, Assembler::zero);
2674 save_native_result(masm, ret_type, stack_slots);
2675 __ set_metadata_constant(method(), O1);
2676 __ call_VM_leaf(L7_thread_cache,
2677 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
2678 G2_thread, O1);
2679 restore_native_result(masm, ret_type, stack_slots);
2680 }
2682 // Clear "last Java frame" SP and PC.
2683 __ verify_thread(); // G2_thread must be correct
2684 __ reset_last_Java_frame();
2686 // Unpack oop result
2687 if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
2688 Label L;
2689 __ addcc(G0, I0, G0);
2690 __ brx(Assembler::notZero, true, Assembler::pt, L);
2691 __ delayed()->ld_ptr(I0, 0, I0);
2692 __ mov(G0, I0);
2693 __ bind(L);
2694 __ verify_oop(I0);
2695 }
2697 if (!is_critical_native) {
2698 // reset handle block
2699 __ ld_ptr(G2_thread, in_bytes(JavaThread::active_handles_offset()), L5);
2700 __ st_ptr(G0, L5, JNIHandleBlock::top_offset_in_bytes());
2702 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), G3_scratch);
2703 check_forward_pending_exception(masm, G3_scratch);
2704 }
2707 // Return
2709 #ifndef _LP64
2710 if (ret_type == T_LONG) {
2712 // Must leave proper result in O0,O1 and G1 (c2/tiered only)
2713 __ sllx(I0, 32, G1); // Shift bits into high G1
2714 __ srl (I1, 0, I1); // Zero extend O1 (harmless?)
2715 __ or3 (I1, G1, G1); // OR 64 bits into G1
2716 }
2717 #endif
2719 __ ret();
2720 __ delayed()->restore();
2722 __ flush();
2724 nmethod *nm = nmethod::new_native_nmethod(method,
2725 compile_id,
2726 masm->code(),
2727 vep_offset,
2728 frame_complete,
2729 stack_slots / VMRegImpl::slots_per_word,
2730 (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
2731 in_ByteSize(lock_offset),
2732 oop_maps);
2734 if (is_critical_native) {
2735 nm->set_lazy_critical_native(true);
2736 }
2737 return nm;
2739 }
2741 #ifdef HAVE_DTRACE_H
2742 // ---------------------------------------------------------------------------
2743 // Generate a dtrace nmethod for a given signature. The method takes arguments
2744 // in the Java compiled code convention, marshals them to the native
2745 // abi and then leaves nops at the position you would expect to call a native
2746 // function. When the probe is enabled the nops are replaced with a trap
2747 // instruction that dtrace inserts and the trace will cause a notification
2748 // to dtrace.
2749 //
2750 // The probes are only able to take primitive types and java/lang/String as
2751 // arguments. No other java types are allowed. Strings are converted to utf8
2752 // strings so that from dtrace point of view java strings are converted to C
2753 // strings. There is an arbitrary fixed limit on the total space that a method
2754 // can use for converting the strings. (256 chars per string in the signature).
2755 // So any java string larger then this is truncated.
2757 static int fp_offset[ConcreteRegisterImpl::number_of_registers] = { 0 };
2758 static bool offsets_initialized = false;
2760 nmethod *SharedRuntime::generate_dtrace_nmethod(
2761 MacroAssembler *masm, methodHandle method) {
2764 // generate_dtrace_nmethod is guarded by a mutex so we are sure to
2765 // be single threaded in this method.
2766 assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");
2768 // Fill in the signature array, for the calling-convention call.
2769 int total_args_passed = method->size_of_parameters();
2771 BasicType* in_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
2772 VMRegPair *in_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);
2774 // The signature we are going to use for the trap that dtrace will see
2775 // java/lang/String is converted. We drop "this" and any other object
2776 // is converted to NULL. (A one-slot java/lang/Long object reference
2777 // is converted to a two-slot long, which is why we double the allocation).
2778 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
2779 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);
2781 int i=0;
2782 int total_strings = 0;
2783 int first_arg_to_pass = 0;
2784 int total_c_args = 0;
2786 // Skip the receiver as dtrace doesn't want to see it
2787 if( !method->is_static() ) {
2788 in_sig_bt[i++] = T_OBJECT;
2789 first_arg_to_pass = 1;
2790 }
2792 SignatureStream ss(method->signature());
2793 for ( ; !ss.at_return_type(); ss.next()) {
2794 BasicType bt = ss.type();
2795 in_sig_bt[i++] = bt; // Collect remaining bits of signature
2796 out_sig_bt[total_c_args++] = bt;
2797 if( bt == T_OBJECT) {
2798 Symbol* s = ss.as_symbol_or_null();
2799 if (s == vmSymbols::java_lang_String()) {
2800 total_strings++;
2801 out_sig_bt[total_c_args-1] = T_ADDRESS;
2802 } else if (s == vmSymbols::java_lang_Boolean() ||
2803 s == vmSymbols::java_lang_Byte()) {
2804 out_sig_bt[total_c_args-1] = T_BYTE;
2805 } else if (s == vmSymbols::java_lang_Character() ||
2806 s == vmSymbols::java_lang_Short()) {
2807 out_sig_bt[total_c_args-1] = T_SHORT;
2808 } else if (s == vmSymbols::java_lang_Integer() ||
2809 s == vmSymbols::java_lang_Float()) {
2810 out_sig_bt[total_c_args-1] = T_INT;
2811 } else if (s == vmSymbols::java_lang_Long() ||
2812 s == vmSymbols::java_lang_Double()) {
2813 out_sig_bt[total_c_args-1] = T_LONG;
2814 out_sig_bt[total_c_args++] = T_VOID;
2815 }
2816 } else if ( bt == T_LONG || bt == T_DOUBLE ) {
2817 in_sig_bt[i++] = T_VOID; // Longs & doubles take 2 Java slots
2818 // We convert double to long
2819 out_sig_bt[total_c_args-1] = T_LONG;
2820 out_sig_bt[total_c_args++] = T_VOID;
2821 } else if ( bt == T_FLOAT) {
2822 // We convert float to int
2823 out_sig_bt[total_c_args-1] = T_INT;
2824 }
2825 }
2827 assert(i==total_args_passed, "validly parsed signature");
2829 // Now get the compiled-Java layout as input arguments
2830 int comp_args_on_stack;
2831 comp_args_on_stack = SharedRuntime::java_calling_convention(
2832 in_sig_bt, in_regs, total_args_passed, false);
2834 // We have received a description of where all the java arg are located
2835 // on entry to the wrapper. We need to convert these args to where
2836 // the a native (non-jni) function would expect them. To figure out
2837 // where they go we convert the java signature to a C signature and remove
2838 // T_VOID for any long/double we might have received.
2841 // Now figure out where the args must be stored and how much stack space
2842 // they require (neglecting out_preserve_stack_slots but space for storing
2843 // the 1st six register arguments). It's weird see int_stk_helper.
2844 //
2845 int out_arg_slots;
2846 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);
2848 // Calculate the total number of stack slots we will need.
2850 // First count the abi requirement plus all of the outgoing args
2851 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
2853 // Plus a temp for possible converion of float/double/long register args
2855 int conversion_temp = stack_slots;
2856 stack_slots += 2;
2859 // Now space for the string(s) we must convert
2861 int string_locs = stack_slots;
2862 stack_slots += total_strings *
2863 (max_dtrace_string_size / VMRegImpl::stack_slot_size);
2865 // Ok The space we have allocated will look like:
2866 //
2867 //
2868 // FP-> | |
2869 // |---------------------|
2870 // | string[n] |
2871 // |---------------------| <- string_locs[n]
2872 // | string[n-1] |
2873 // |---------------------| <- string_locs[n-1]
2874 // | ... |
2875 // | ... |
2876 // |---------------------| <- string_locs[1]
2877 // | string[0] |
2878 // |---------------------| <- string_locs[0]
2879 // | temp |
2880 // |---------------------| <- conversion_temp
2881 // | outbound memory |
2882 // | based arguments |
2883 // | |
2884 // |---------------------|
2885 // | |
2886 // SP-> | out_preserved_slots |
2887 //
2888 //
2890 // Now compute actual number of stack words we need rounding to make
2891 // stack properly aligned.
2892 stack_slots = round_to(stack_slots, 4 * VMRegImpl::slots_per_word);
2894 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
2896 intptr_t start = (intptr_t)__ pc();
2898 // First thing make an ic check to see if we should even be here
2900 {
2901 Label L;
2902 const Register temp_reg = G3_scratch;
2903 AddressLiteral ic_miss(SharedRuntime::get_ic_miss_stub());
2904 __ verify_oop(O0);
2905 __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), temp_reg);
2906 __ cmp_and_brx_short(temp_reg, G5_inline_cache_reg, Assembler::equal, Assembler::pt, L);
2908 __ jump_to(ic_miss, temp_reg);
2909 __ delayed()->nop();
2910 __ align(CodeEntryAlignment);
2911 __ bind(L);
2912 }
2914 int vep_offset = ((intptr_t)__ pc()) - start;
2917 // The instruction at the verified entry point must be 5 bytes or longer
2918 // because it can be patched on the fly by make_non_entrant. The stack bang
2919 // instruction fits that requirement.
2921 // Generate stack overflow check before creating frame
2922 __ generate_stack_overflow_check(stack_size);
2924 assert(((intptr_t)__ pc() - start - vep_offset) >= 5,
2925 "valid size for make_non_entrant");
2927 // Generate a new frame for the wrapper.
2928 __ save(SP, -stack_size, SP);
2930 // Frame is now completed as far a size and linkage.
2932 int frame_complete = ((intptr_t)__ pc()) - start;
2934 #ifdef ASSERT
2935 bool reg_destroyed[RegisterImpl::number_of_registers];
2936 bool freg_destroyed[FloatRegisterImpl::number_of_registers];
2937 for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {
2938 reg_destroyed[r] = false;
2939 }
2940 for ( int f = 0 ; f < FloatRegisterImpl::number_of_registers ; f++ ) {
2941 freg_destroyed[f] = false;
2942 }
2944 #endif /* ASSERT */
2946 VMRegPair zero;
2947 const Register g0 = G0; // without this we get a compiler warning (why??)
2948 zero.set2(g0->as_VMReg());
2950 int c_arg, j_arg;
2952 Register conversion_off = noreg;
2954 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2955 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2957 VMRegPair src = in_regs[j_arg];
2958 VMRegPair dst = out_regs[c_arg];
2960 #ifdef ASSERT
2961 if (src.first()->is_Register()) {
2962 assert(!reg_destroyed[src.first()->as_Register()->encoding()], "ack!");
2963 } else if (src.first()->is_FloatRegister()) {
2964 assert(!freg_destroyed[src.first()->as_FloatRegister()->encoding(
2965 FloatRegisterImpl::S)], "ack!");
2966 }
2967 if (dst.first()->is_Register()) {
2968 reg_destroyed[dst.first()->as_Register()->encoding()] = true;
2969 } else if (dst.first()->is_FloatRegister()) {
2970 freg_destroyed[dst.first()->as_FloatRegister()->encoding(
2971 FloatRegisterImpl::S)] = true;
2972 }
2973 #endif /* ASSERT */
2975 switch (in_sig_bt[j_arg]) {
2976 case T_ARRAY:
2977 case T_OBJECT:
2978 {
2979 if (out_sig_bt[c_arg] == T_BYTE || out_sig_bt[c_arg] == T_SHORT ||
2980 out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
2981 // need to unbox a one-slot value
2982 Register in_reg = L0;
2983 Register tmp = L2;
2984 if ( src.first()->is_reg() ) {
2985 in_reg = src.first()->as_Register();
2986 } else {
2987 assert(Assembler::is_simm13(reg2offset(src.first()) + STACK_BIAS),
2988 "must be");
2989 __ ld_ptr(FP, reg2offset(src.first()) + STACK_BIAS, in_reg);
2990 }
2991 // If the final destination is an acceptable register
2992 if ( dst.first()->is_reg() ) {
2993 if ( dst.is_single_phys_reg() || out_sig_bt[c_arg] != T_LONG ) {
2994 tmp = dst.first()->as_Register();
2995 }
2996 }
2998 Label skipUnbox;
2999 if ( wordSize == 4 && out_sig_bt[c_arg] == T_LONG ) {
3000 __ mov(G0, tmp->successor());
3001 }
3002 __ br_null(in_reg, true, Assembler::pn, skipUnbox);
3003 __ delayed()->mov(G0, tmp);
3005 BasicType bt = out_sig_bt[c_arg];
3006 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
3007 switch (bt) {
3008 case T_BYTE:
3009 __ ldub(in_reg, box_offset, tmp); break;
3010 case T_SHORT:
3011 __ lduh(in_reg, box_offset, tmp); break;
3012 case T_INT:
3013 __ ld(in_reg, box_offset, tmp); break;
3014 case T_LONG:
3015 __ ld_long(in_reg, box_offset, tmp); break;
3016 default: ShouldNotReachHere();
3017 }
3019 __ bind(skipUnbox);
3020 // If tmp wasn't final destination copy to final destination
3021 if (tmp == L2) {
3022 VMRegPair tmp_as_VM = reg64_to_VMRegPair(L2);
3023 if (out_sig_bt[c_arg] == T_LONG) {
3024 long_move(masm, tmp_as_VM, dst);
3025 } else {
3026 move32_64(masm, tmp_as_VM, out_regs[c_arg]);
3027 }
3028 }
3029 if (out_sig_bt[c_arg] == T_LONG) {
3030 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
3031 ++c_arg; // move over the T_VOID to keep the loop indices in sync
3032 }
3033 } else if (out_sig_bt[c_arg] == T_ADDRESS) {
3034 Register s =
3035 src.first()->is_reg() ? src.first()->as_Register() : L2;
3036 Register d =
3037 dst.first()->is_reg() ? dst.first()->as_Register() : L2;
3039 // We store the oop now so that the conversion pass can reach
3040 // while in the inner frame. This will be the only store if
3041 // the oop is NULL.
3042 if (s != L2) {
3043 // src is register
3044 if (d != L2) {
3045 // dst is register
3046 __ mov(s, d);
3047 } else {
3048 assert(Assembler::is_simm13(reg2offset(dst.first()) +
3049 STACK_BIAS), "must be");
3050 __ st_ptr(s, SP, reg2offset(dst.first()) + STACK_BIAS);
3051 }
3052 } else {
3053 // src not a register
3054 assert(Assembler::is_simm13(reg2offset(src.first()) +
3055 STACK_BIAS), "must be");
3056 __ ld_ptr(FP, reg2offset(src.first()) + STACK_BIAS, d);
3057 if (d == L2) {
3058 assert(Assembler::is_simm13(reg2offset(dst.first()) +
3059 STACK_BIAS), "must be");
3060 __ st_ptr(d, SP, reg2offset(dst.first()) + STACK_BIAS);
3061 }
3062 }
3063 } else if (out_sig_bt[c_arg] != T_VOID) {
3064 // Convert the arg to NULL
3065 if (dst.first()->is_reg()) {
3066 __ mov(G0, dst.first()->as_Register());
3067 } else {
3068 assert(Assembler::is_simm13(reg2offset(dst.first()) +
3069 STACK_BIAS), "must be");
3070 __ st_ptr(G0, SP, reg2offset(dst.first()) + STACK_BIAS);
3071 }
3072 }
3073 }
3074 break;
3075 case T_VOID:
3076 break;
3078 case T_FLOAT:
3079 if (src.first()->is_stack()) {
3080 // Stack to stack/reg is simple
3081 move32_64(masm, src, dst);
3082 } else {
3083 if (dst.first()->is_reg()) {
3084 // freg -> reg
3085 int off =
3086 STACK_BIAS + conversion_temp * VMRegImpl::stack_slot_size;
3087 Register d = dst.first()->as_Register();
3088 if (Assembler::is_simm13(off)) {
3089 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(),
3090 SP, off);
3091 __ ld(SP, off, d);
3092 } else {
3093 if (conversion_off == noreg) {
3094 __ set(off, L6);
3095 conversion_off = L6;
3096 }
3097 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(),
3098 SP, conversion_off);
3099 __ ld(SP, conversion_off , d);
3100 }
3101 } else {
3102 // freg -> mem
3103 int off = STACK_BIAS + reg2offset(dst.first());
3104 if (Assembler::is_simm13(off)) {
3105 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(),
3106 SP, off);
3107 } else {
3108 if (conversion_off == noreg) {
3109 __ set(off, L6);
3110 conversion_off = L6;
3111 }
3112 __ stf(FloatRegisterImpl::S, src.first()->as_FloatRegister(),
3113 SP, conversion_off);
3114 }
3115 }
3116 }
3117 break;
3119 case T_DOUBLE:
3120 assert( j_arg + 1 < total_args_passed &&
3121 in_sig_bt[j_arg + 1] == T_VOID &&
3122 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
3123 if (src.first()->is_stack()) {
3124 // Stack to stack/reg is simple
3125 long_move(masm, src, dst);
3126 } else {
3127 Register d = dst.first()->is_reg() ? dst.first()->as_Register() : L2;
3129 // Destination could be an odd reg on 32bit in which case
3130 // we can't load direct to the destination.
3132 if (!d->is_even() && wordSize == 4) {
3133 d = L2;
3134 }
3135 int off = STACK_BIAS + conversion_temp * VMRegImpl::stack_slot_size;
3136 if (Assembler::is_simm13(off)) {
3137 __ stf(FloatRegisterImpl::D, src.first()->as_FloatRegister(),
3138 SP, off);
3139 __ ld_long(SP, off, d);
3140 } else {
3141 if (conversion_off == noreg) {
3142 __ set(off, L6);
3143 conversion_off = L6;
3144 }
3145 __ stf(FloatRegisterImpl::D, src.first()->as_FloatRegister(),
3146 SP, conversion_off);
3147 __ ld_long(SP, conversion_off, d);
3148 }
3149 if (d == L2) {
3150 long_move(masm, reg64_to_VMRegPair(L2), dst);
3151 }
3152 }
3153 break;
3155 case T_LONG :
3156 // 32bit can't do a split move of something like g1 -> O0, O1
3157 // so use a memory temp
3158 if (src.is_single_phys_reg() && wordSize == 4) {
3159 Register tmp = L2;
3160 if (dst.first()->is_reg() &&
3161 (wordSize == 8 || dst.first()->as_Register()->is_even())) {
3162 tmp = dst.first()->as_Register();
3163 }
3165 int off = STACK_BIAS + conversion_temp * VMRegImpl::stack_slot_size;
3166 if (Assembler::is_simm13(off)) {
3167 __ stx(src.first()->as_Register(), SP, off);
3168 __ ld_long(SP, off, tmp);
3169 } else {
3170 if (conversion_off == noreg) {
3171 __ set(off, L6);
3172 conversion_off = L6;
3173 }
3174 __ stx(src.first()->as_Register(), SP, conversion_off);
3175 __ ld_long(SP, conversion_off, tmp);
3176 }
3178 if (tmp == L2) {
3179 long_move(masm, reg64_to_VMRegPair(L2), dst);
3180 }
3181 } else {
3182 long_move(masm, src, dst);
3183 }
3184 break;
3186 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
3188 default:
3189 move32_64(masm, src, dst);
3190 }
3191 }
3194 // If we have any strings we must store any register based arg to the stack
3195 // This includes any still live xmm registers too.
3197 if (total_strings > 0 ) {
3199 // protect all the arg registers
3200 __ save_frame(0);
3201 __ mov(G2_thread, L7_thread_cache);
3202 const Register L2_string_off = L2;
3204 // Get first string offset
3205 __ set(string_locs * VMRegImpl::stack_slot_size, L2_string_off);
3207 for (c_arg = 0 ; c_arg < total_c_args ; c_arg++ ) {
3208 if (out_sig_bt[c_arg] == T_ADDRESS) {
3210 VMRegPair dst = out_regs[c_arg];
3211 const Register d = dst.first()->is_reg() ?
3212 dst.first()->as_Register()->after_save() : noreg;
3214 // It's a string the oop and it was already copied to the out arg
3215 // position
3216 if (d != noreg) {
3217 __ mov(d, O0);
3218 } else {
3219 assert(Assembler::is_simm13(reg2offset(dst.first()) + STACK_BIAS),
3220 "must be");
3221 __ ld_ptr(FP, reg2offset(dst.first()) + STACK_BIAS, O0);
3222 }
3223 Label skip;
3225 __ br_null(O0, false, Assembler::pn, skip);
3226 __ delayed()->add(FP, L2_string_off, O1);
3228 if (d != noreg) {
3229 __ mov(O1, d);
3230 } else {
3231 assert(Assembler::is_simm13(reg2offset(dst.first()) + STACK_BIAS),
3232 "must be");
3233 __ st_ptr(O1, FP, reg2offset(dst.first()) + STACK_BIAS);
3234 }
3236 __ call(CAST_FROM_FN_PTR(address, SharedRuntime::get_utf),
3237 relocInfo::runtime_call_type);
3238 __ delayed()->add(L2_string_off, max_dtrace_string_size, L2_string_off);
3240 __ bind(skip);
3242 }
3244 }
3245 __ mov(L7_thread_cache, G2_thread);
3246 __ restore();
3248 }
3251 // Ok now we are done. Need to place the nop that dtrace wants in order to
3252 // patch in the trap
3254 int patch_offset = ((intptr_t)__ pc()) - start;
3256 __ nop();
3259 // Return
3261 __ ret();
3262 __ delayed()->restore();
3264 __ flush();
3266 nmethod *nm = nmethod::new_dtrace_nmethod(
3267 method, masm->code(), vep_offset, patch_offset, frame_complete,
3268 stack_slots / VMRegImpl::slots_per_word);
3269 return nm;
3271 }
3273 #endif // HAVE_DTRACE_H
3275 // this function returns the adjust size (in number of words) to a c2i adapter
3276 // activation for use during deoptimization
3277 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals) {
3278 assert(callee_locals >= callee_parameters,
3279 "test and remove; got more parms than locals");
3280 if (callee_locals < callee_parameters)
3281 return 0; // No adjustment for negative locals
3282 int diff = (callee_locals - callee_parameters) * Interpreter::stackElementWords;
3283 return round_to(diff, WordsPerLong);
3284 }
3286 // "Top of Stack" slots that may be unused by the calling convention but must
3287 // otherwise be preserved.
3288 // On Intel these are not necessary and the value can be zero.
3289 // On Sparc this describes the words reserved for storing a register window
3290 // when an interrupt occurs.
3291 uint SharedRuntime::out_preserve_stack_slots() {
3292 return frame::register_save_words * VMRegImpl::slots_per_word;
3293 }
3295 static void gen_new_frame(MacroAssembler* masm, bool deopt) {
3296 //
3297 // Common out the new frame generation for deopt and uncommon trap
3298 //
3299 Register G3pcs = G3_scratch; // Array of new pcs (input)
3300 Register Oreturn0 = O0;
3301 Register Oreturn1 = O1;
3302 Register O2UnrollBlock = O2;
3303 Register O3array = O3; // Array of frame sizes (input)
3304 Register O4array_size = O4; // number of frames (input)
3305 Register O7frame_size = O7; // number of frames (input)
3307 __ ld_ptr(O3array, 0, O7frame_size);
3308 __ sub(G0, O7frame_size, O7frame_size);
3309 __ save(SP, O7frame_size, SP);
3310 __ ld_ptr(G3pcs, 0, I7); // load frame's new pc
3312 #ifdef ASSERT
3313 // make sure that the frames are aligned properly
3314 #ifndef _LP64
3315 __ btst(wordSize*2-1, SP);
3316 __ breakpoint_trap(Assembler::notZero, Assembler::ptr_cc);
3317 #endif
3318 #endif
3320 // Deopt needs to pass some extra live values from frame to frame
3322 if (deopt) {
3323 __ mov(Oreturn0->after_save(), Oreturn0);
3324 __ mov(Oreturn1->after_save(), Oreturn1);
3325 }
3327 __ mov(O4array_size->after_save(), O4array_size);
3328 __ sub(O4array_size, 1, O4array_size);
3329 __ mov(O3array->after_save(), O3array);
3330 __ mov(O2UnrollBlock->after_save(), O2UnrollBlock);
3331 __ add(G3pcs, wordSize, G3pcs); // point to next pc value
3333 #ifdef ASSERT
3334 // trash registers to show a clear pattern in backtraces
3335 __ set(0xDEAD0000, I0);
3336 __ add(I0, 2, I1);
3337 __ add(I0, 4, I2);
3338 __ add(I0, 6, I3);
3339 __ add(I0, 8, I4);
3340 // Don't touch I5 could have valuable savedSP
3341 __ set(0xDEADBEEF, L0);
3342 __ mov(L0, L1);
3343 __ mov(L0, L2);
3344 __ mov(L0, L3);
3345 __ mov(L0, L4);
3346 __ mov(L0, L5);
3348 // trash the return value as there is nothing to return yet
3349 __ set(0xDEAD0001, O7);
3350 #endif
3352 __ mov(SP, O5_savedSP);
3353 }
3356 static void make_new_frames(MacroAssembler* masm, bool deopt) {
3357 //
3358 // loop through the UnrollBlock info and create new frames
3359 //
3360 Register G3pcs = G3_scratch;
3361 Register Oreturn0 = O0;
3362 Register Oreturn1 = O1;
3363 Register O2UnrollBlock = O2;
3364 Register O3array = O3;
3365 Register O4array_size = O4;
3366 Label loop;
3368 // Before we make new frames, check to see if stack is available.
3369 // Do this after the caller's return address is on top of stack
3370 if (UseStackBanging) {
3371 // Get total frame size for interpreted frames
3372 __ ld(O2UnrollBlock, Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes(), O4);
3373 __ bang_stack_size(O4, O3, G3_scratch);
3374 }
3376 __ ld(O2UnrollBlock, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes(), O4array_size);
3377 __ ld_ptr(O2UnrollBlock, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes(), G3pcs);
3378 __ ld_ptr(O2UnrollBlock, Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes(), O3array);
3380 // Adjust old interpreter frame to make space for new frame's extra java locals
3381 //
3382 // We capture the original sp for the transition frame only because it is needed in
3383 // order to properly calculate interpreter_sp_adjustment. Even though in real life
3384 // every interpreter frame captures a savedSP it is only needed at the transition
3385 // (fortunately). If we had to have it correct everywhere then we would need to
3386 // be told the sp_adjustment for each frame we create. If the frame size array
3387 // were to have twice the frame count entries then we could have pairs [sp_adjustment, frame_size]
3388 // for each frame we create and keep up the illusion every where.
3389 //
3391 __ ld(O2UnrollBlock, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes(), O7);
3392 __ mov(SP, O5_savedSP); // remember initial sender's original sp before adjustment
3393 __ sub(SP, O7, SP);
3395 #ifdef ASSERT
3396 // make sure that there is at least one entry in the array
3397 __ tst(O4array_size);
3398 __ breakpoint_trap(Assembler::zero, Assembler::icc);
3399 #endif
3401 // Now push the new interpreter frames
3402 __ bind(loop);
3404 // allocate a new frame, filling the registers
3406 gen_new_frame(masm, deopt); // allocate an interpreter frame
3408 __ cmp_zero_and_br(Assembler::notZero, O4array_size, loop);
3409 __ delayed()->add(O3array, wordSize, O3array);
3410 __ ld_ptr(G3pcs, 0, O7); // load final frame new pc
3412 }
3414 //------------------------------generate_deopt_blob----------------------------
3415 // Ought to generate an ideal graph & compile, but here's some SPARC ASM
3416 // instead.
3417 void SharedRuntime::generate_deopt_blob() {
3418 // allocate space for the code
3419 ResourceMark rm;
3420 // setup code generation tools
3421 int pad = VerifyThread ? 512 : 0;// Extra slop space for more verify code
3422 if (UseStackBanging) {
3423 pad += StackShadowPages*16 + 32;
3424 }
3425 #ifdef _LP64
3426 CodeBuffer buffer("deopt_blob", 2100+pad, 512);
3427 #else
3428 // Measured 8/7/03 at 1212 in 32bit debug build (no VerifyThread)
3429 // Measured 8/7/03 at 1396 in 32bit debug build (VerifyThread)
3430 CodeBuffer buffer("deopt_blob", 1600+pad, 512);
3431 #endif /* _LP64 */
3432 MacroAssembler* masm = new MacroAssembler(&buffer);
3433 FloatRegister Freturn0 = F0;
3434 Register Greturn1 = G1;
3435 Register Oreturn0 = O0;
3436 Register Oreturn1 = O1;
3437 Register O2UnrollBlock = O2;
3438 Register L0deopt_mode = L0;
3439 Register G4deopt_mode = G4_scratch;
3440 int frame_size_words;
3441 Address saved_Freturn0_addr(FP, -sizeof(double) + STACK_BIAS);
3442 #if !defined(_LP64) && defined(COMPILER2)
3443 Address saved_Greturn1_addr(FP, -sizeof(double) -sizeof(jlong) + STACK_BIAS);
3444 #endif
3445 Label cont;
3447 OopMapSet *oop_maps = new OopMapSet();
3449 //
3450 // This is the entry point for code which is returning to a de-optimized
3451 // frame.
3452 // The steps taken by this frame are as follows:
3453 // - push a dummy "register_save" and save the return values (O0, O1, F0/F1, G1)
3454 // and all potentially live registers (at a pollpoint many registers can be live).
3455 //
3456 // - call the C routine: Deoptimization::fetch_unroll_info (this function
3457 // returns information about the number and size of interpreter frames
3458 // which are equivalent to the frame which is being deoptimized)
3459 // - deallocate the unpack frame, restoring only results values. Other
3460 // volatile registers will now be captured in the vframeArray as needed.
3461 // - deallocate the deoptimization frame
3462 // - in a loop using the information returned in the previous step
3463 // push new interpreter frames (take care to propagate the return
3464 // values through each new frame pushed)
3465 // - create a dummy "unpack_frame" and save the return values (O0, O1, F0)
3466 // - call the C routine: Deoptimization::unpack_frames (this function
3467 // lays out values on the interpreter frame which was just created)
3468 // - deallocate the dummy unpack_frame
3469 // - ensure that all the return values are correctly set and then do
3470 // a return to the interpreter entry point
3471 //
3472 // Refer to the following methods for more information:
3473 // - Deoptimization::fetch_unroll_info
3474 // - Deoptimization::unpack_frames
3476 OopMap* map = NULL;
3478 int start = __ offset();
3480 // restore G2, the trampoline destroyed it
3481 __ get_thread();
3483 // On entry we have been called by the deoptimized nmethod with a call that
3484 // replaced the original call (or safepoint polling location) so the deoptimizing
3485 // pc is now in O7. Return values are still in the expected places
3487 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_words);
3488 __ ba(cont);
3489 __ delayed()->mov(Deoptimization::Unpack_deopt, L0deopt_mode);
3491 int exception_offset = __ offset() - start;
3493 // restore G2, the trampoline destroyed it
3494 __ get_thread();
3496 // On entry we have been jumped to by the exception handler (or exception_blob
3497 // for server). O0 contains the exception oop and O7 contains the original
3498 // exception pc. So if we push a frame here it will look to the
3499 // stack walking code (fetch_unroll_info) just like a normal call so
3500 // state will be extracted normally.
3502 // save exception oop in JavaThread and fall through into the
3503 // exception_in_tls case since they are handled in same way except
3504 // for where the pending exception is kept.
3505 __ st_ptr(Oexception, G2_thread, JavaThread::exception_oop_offset());
3507 //
3508 // Vanilla deoptimization with an exception pending in exception_oop
3509 //
3510 int exception_in_tls_offset = __ offset() - start;
3512 // No need to update oop_map as each call to save_live_registers will produce identical oopmap
3513 (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_words);
3515 // Restore G2_thread
3516 __ get_thread();
3518 #ifdef ASSERT
3519 {
3520 // verify that there is really an exception oop in exception_oop
3521 Label has_exception;
3522 __ ld_ptr(G2_thread, JavaThread::exception_oop_offset(), Oexception);
3523 __ br_notnull_short(Oexception, Assembler::pt, has_exception);
3524 __ stop("no exception in thread");
3525 __ bind(has_exception);
3527 // verify that there is no pending exception
3528 Label no_pending_exception;
3529 Address exception_addr(G2_thread, Thread::pending_exception_offset());
3530 __ ld_ptr(exception_addr, Oexception);
3531 __ br_null_short(Oexception, Assembler::pt, no_pending_exception);
3532 __ stop("must not have pending exception here");
3533 __ bind(no_pending_exception);
3534 }
3535 #endif
3537 __ ba(cont);
3538 __ delayed()->mov(Deoptimization::Unpack_exception, L0deopt_mode);;
3540 //
3541 // Reexecute entry, similar to c2 uncommon trap
3542 //
3543 int reexecute_offset = __ offset() - start;
3545 // No need to update oop_map as each call to save_live_registers will produce identical oopmap
3546 (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_words);
3548 __ mov(Deoptimization::Unpack_reexecute, L0deopt_mode);
3550 __ bind(cont);
3552 __ set_last_Java_frame(SP, noreg);
3554 // do the call by hand so we can get the oopmap
3556 __ mov(G2_thread, L7_thread_cache);
3557 __ call(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info), relocInfo::runtime_call_type);
3558 __ delayed()->mov(G2_thread, O0);
3560 // Set an oopmap for the call site this describes all our saved volatile registers
3562 oop_maps->add_gc_map( __ offset()-start, map);
3564 __ mov(L7_thread_cache, G2_thread);
3566 __ reset_last_Java_frame();
3568 // NOTE: we know that only O0/O1 will be reloaded by restore_result_registers
3569 // so this move will survive
3571 __ mov(L0deopt_mode, G4deopt_mode);
3573 __ mov(O0, O2UnrollBlock->after_save());
3575 RegisterSaver::restore_result_registers(masm);
3577 Label noException;
3578 __ cmp_and_br_short(G4deopt_mode, Deoptimization::Unpack_exception, Assembler::notEqual, Assembler::pt, noException);
3580 // Move the pending exception from exception_oop to Oexception so
3581 // the pending exception will be picked up the interpreter.
3582 __ ld_ptr(G2_thread, in_bytes(JavaThread::exception_oop_offset()), Oexception);
3583 __ st_ptr(G0, G2_thread, in_bytes(JavaThread::exception_oop_offset()));
3584 __ bind(noException);
3586 // deallocate the deoptimization frame taking care to preserve the return values
3587 __ mov(Oreturn0, Oreturn0->after_save());
3588 __ mov(Oreturn1, Oreturn1->after_save());
3589 __ mov(O2UnrollBlock, O2UnrollBlock->after_save());
3590 __ restore();
3592 // Allocate new interpreter frame(s) and possible c2i adapter frame
3594 make_new_frames(masm, true);
3596 // push a dummy "unpack_frame" taking care of float return values and
3597 // call Deoptimization::unpack_frames to have the unpacker layout
3598 // information in the interpreter frames just created and then return
3599 // to the interpreter entry point
3600 __ save(SP, -frame_size_words*wordSize, SP);
3601 __ stf(FloatRegisterImpl::D, Freturn0, saved_Freturn0_addr);
3602 #if !defined(_LP64)
3603 #if defined(COMPILER2)
3604 // 32-bit 1-register longs return longs in G1
3605 __ stx(Greturn1, saved_Greturn1_addr);
3606 #endif
3607 __ set_last_Java_frame(SP, noreg);
3608 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames), G2_thread, G4deopt_mode);
3609 #else
3610 // LP64 uses g4 in set_last_Java_frame
3611 __ mov(G4deopt_mode, O1);
3612 __ set_last_Java_frame(SP, G0);
3613 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames), G2_thread, O1);
3614 #endif
3615 __ reset_last_Java_frame();
3616 __ ldf(FloatRegisterImpl::D, saved_Freturn0_addr, Freturn0);
3618 #if !defined(_LP64) && defined(COMPILER2)
3619 // In 32 bit, C2 returns longs in G1 so restore the saved G1 into
3620 // I0/I1 if the return value is long.
3621 Label not_long;
3622 __ cmp_and_br_short(O0,T_LONG, Assembler::notEqual, Assembler::pt, not_long);
3623 __ ldd(saved_Greturn1_addr,I0);
3624 __ bind(not_long);
3625 #endif
3626 __ ret();
3627 __ delayed()->restore();
3629 masm->flush();
3630 _deopt_blob = DeoptimizationBlob::create(&buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_words);
3631 _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
3632 }
3634 #ifdef COMPILER2
3636 //------------------------------generate_uncommon_trap_blob--------------------
3637 // Ought to generate an ideal graph & compile, but here's some SPARC ASM
3638 // instead.
3639 void SharedRuntime::generate_uncommon_trap_blob() {
3640 // allocate space for the code
3641 ResourceMark rm;
3642 // setup code generation tools
3643 int pad = VerifyThread ? 512 : 0;
3644 if (UseStackBanging) {
3645 pad += StackShadowPages*16 + 32;
3646 }
3647 #ifdef _LP64
3648 CodeBuffer buffer("uncommon_trap_blob", 2700+pad, 512);
3649 #else
3650 // Measured 8/7/03 at 660 in 32bit debug build (no VerifyThread)
3651 // Measured 8/7/03 at 1028 in 32bit debug build (VerifyThread)
3652 CodeBuffer buffer("uncommon_trap_blob", 2000+pad, 512);
3653 #endif
3654 MacroAssembler* masm = new MacroAssembler(&buffer);
3655 Register O2UnrollBlock = O2;
3656 Register O2klass_index = O2;
3658 //
3659 // This is the entry point for all traps the compiler takes when it thinks
3660 // it cannot handle further execution of compilation code. The frame is
3661 // deoptimized in these cases and converted into interpreter frames for
3662 // execution
3663 // The steps taken by this frame are as follows:
3664 // - push a fake "unpack_frame"
3665 // - call the C routine Deoptimization::uncommon_trap (this function
3666 // packs the current compiled frame into vframe arrays and returns
3667 // information about the number and size of interpreter frames which
3668 // are equivalent to the frame which is being deoptimized)
3669 // - deallocate the "unpack_frame"
3670 // - deallocate the deoptimization frame
3671 // - in a loop using the information returned in the previous step
3672 // push interpreter frames;
3673 // - create a dummy "unpack_frame"
3674 // - call the C routine: Deoptimization::unpack_frames (this function
3675 // lays out values on the interpreter frame which was just created)
3676 // - deallocate the dummy unpack_frame
3677 // - return to the interpreter entry point
3678 //
3679 // Refer to the following methods for more information:
3680 // - Deoptimization::uncommon_trap
3681 // - Deoptimization::unpack_frame
3683 // the unloaded class index is in O0 (first parameter to this blob)
3685 // push a dummy "unpack_frame"
3686 // and call Deoptimization::uncommon_trap to pack the compiled frame into
3687 // vframe array and return the UnrollBlock information
3688 __ save_frame(0);
3689 __ set_last_Java_frame(SP, noreg);
3690 __ mov(I0, O2klass_index);
3691 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap), G2_thread, O2klass_index);
3692 __ reset_last_Java_frame();
3693 __ mov(O0, O2UnrollBlock->after_save());
3694 __ restore();
3696 // deallocate the deoptimized frame taking care to preserve the return values
3697 __ mov(O2UnrollBlock, O2UnrollBlock->after_save());
3698 __ restore();
3700 // Allocate new interpreter frame(s) and possible c2i adapter frame
3702 make_new_frames(masm, false);
3704 // push a dummy "unpack_frame" taking care of float return values and
3705 // call Deoptimization::unpack_frames to have the unpacker layout
3706 // information in the interpreter frames just created and then return
3707 // to the interpreter entry point
3708 __ save_frame(0);
3709 __ set_last_Java_frame(SP, noreg);
3710 __ mov(Deoptimization::Unpack_uncommon_trap, O3); // indicate it is the uncommon trap case
3711 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames), G2_thread, O3);
3712 __ reset_last_Java_frame();
3713 __ ret();
3714 __ delayed()->restore();
3716 masm->flush();
3717 _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, NULL, __ total_frame_size_in_bytes(0)/wordSize);
3718 }
3720 #endif // COMPILER2
3722 //------------------------------generate_handler_blob-------------------
3723 //
3724 // Generate a special Compile2Runtime blob that saves all registers, and sets
3725 // up an OopMap.
3726 //
3727 // This blob is jumped to (via a breakpoint and the signal handler) from a
3728 // safepoint in compiled code. On entry to this blob, O7 contains the
3729 // address in the original nmethod at which we should resume normal execution.
3730 // Thus, this blob looks like a subroutine which must preserve lots of
3731 // registers and return normally. Note that O7 is never register-allocated,
3732 // so it is guaranteed to be free here.
3733 //
3735 // The hardest part of what this blob must do is to save the 64-bit %o
3736 // registers in the 32-bit build. A simple 'save' turn the %o's to %i's and
3737 // an interrupt will chop off their heads. Making space in the caller's frame
3738 // first will let us save the 64-bit %o's before save'ing, but we cannot hand
3739 // the adjusted FP off to the GC stack-crawler: this will modify the caller's
3740 // SP and mess up HIS OopMaps. So we first adjust the caller's SP, then save
3741 // the 64-bit %o's, then do a save, then fixup the caller's SP (our FP).
3742 // Tricky, tricky, tricky...
3744 SafepointBlob* SharedRuntime::generate_handler_blob(address call_ptr, int poll_type) {
3745 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3747 // allocate space for the code
3748 ResourceMark rm;
3749 // setup code generation tools
3750 // Measured 8/7/03 at 896 in 32bit debug build (no VerifyThread)
3751 // Measured 8/7/03 at 1080 in 32bit debug build (VerifyThread)
3752 // even larger with TraceJumps
3753 int pad = TraceJumps ? 512 : 0;
3754 CodeBuffer buffer("handler_blob", 1600 + pad, 512);
3755 MacroAssembler* masm = new MacroAssembler(&buffer);
3756 int frame_size_words;
3757 OopMapSet *oop_maps = new OopMapSet();
3758 OopMap* map = NULL;
3760 int start = __ offset();
3762 bool cause_return = (poll_type == POLL_AT_RETURN);
3763 // If this causes a return before the processing, then do a "restore"
3764 if (cause_return) {
3765 __ restore();
3766 } else {
3767 // Make it look like we were called via the poll
3768 // so that frame constructor always sees a valid return address
3769 __ ld_ptr(G2_thread, in_bytes(JavaThread::saved_exception_pc_offset()), O7);
3770 __ sub(O7, frame::pc_return_offset, O7);
3771 }
3773 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_words);
3775 // setup last_Java_sp (blows G4)
3776 __ set_last_Java_frame(SP, noreg);
3778 // call into the runtime to handle illegal instructions exception
3779 // Do not use call_VM_leaf, because we need to make a GC map at this call site.
3780 __ mov(G2_thread, O0);
3781 __ save_thread(L7_thread_cache);
3782 __ call(call_ptr);
3783 __ delayed()->nop();
3785 // Set an oopmap for the call site.
3786 // We need this not only for callee-saved registers, but also for volatile
3787 // registers that the compiler might be keeping live across a safepoint.
3789 oop_maps->add_gc_map( __ offset() - start, map);
3791 __ restore_thread(L7_thread_cache);
3792 // clear last_Java_sp
3793 __ reset_last_Java_frame();
3795 // Check for exceptions
3796 Label pending;
3798 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), O1);
3799 __ br_notnull_short(O1, Assembler::pn, pending);
3801 RegisterSaver::restore_live_registers(masm);
3803 // We are back the the original state on entry and ready to go.
3805 __ retl();
3806 __ delayed()->nop();
3808 // Pending exception after the safepoint
3810 __ bind(pending);
3812 RegisterSaver::restore_live_registers(masm);
3814 // We are back the the original state on entry.
3816 // Tail-call forward_exception_entry, with the issuing PC in O7,
3817 // so it looks like the original nmethod called forward_exception_entry.
3818 __ set((intptr_t)StubRoutines::forward_exception_entry(), O0);
3819 __ JMP(O0, 0);
3820 __ delayed()->nop();
3822 // -------------
3823 // make sure all code is generated
3824 masm->flush();
3826 // return exception blob
3827 return SafepointBlob::create(&buffer, oop_maps, frame_size_words);
3828 }
3830 //
3831 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
3832 //
3833 // Generate a stub that calls into vm to find out the proper destination
3834 // of a java call. All the argument registers are live at this point
3835 // but since this is generic code we don't know what they are and the caller
3836 // must do any gc of the args.
3837 //
3838 RuntimeStub* SharedRuntime::generate_resolve_blob(address destination, const char* name) {
3839 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3841 // allocate space for the code
3842 ResourceMark rm;
3843 // setup code generation tools
3844 // Measured 8/7/03 at 896 in 32bit debug build (no VerifyThread)
3845 // Measured 8/7/03 at 1080 in 32bit debug build (VerifyThread)
3846 // even larger with TraceJumps
3847 int pad = TraceJumps ? 512 : 0;
3848 CodeBuffer buffer(name, 1600 + pad, 512);
3849 MacroAssembler* masm = new MacroAssembler(&buffer);
3850 int frame_size_words;
3851 OopMapSet *oop_maps = new OopMapSet();
3852 OopMap* map = NULL;
3854 int start = __ offset();
3856 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_words);
3858 int frame_complete = __ offset();
3860 // setup last_Java_sp (blows G4)
3861 __ set_last_Java_frame(SP, noreg);
3863 // call into the runtime to handle illegal instructions exception
3864 // Do not use call_VM_leaf, because we need to make a GC map at this call site.
3865 __ mov(G2_thread, O0);
3866 __ save_thread(L7_thread_cache);
3867 __ call(destination, relocInfo::runtime_call_type);
3868 __ delayed()->nop();
3870 // O0 contains the address we are going to jump to assuming no exception got installed
3872 // Set an oopmap for the call site.
3873 // We need this not only for callee-saved registers, but also for volatile
3874 // registers that the compiler might be keeping live across a safepoint.
3876 oop_maps->add_gc_map( __ offset() - start, map);
3878 __ restore_thread(L7_thread_cache);
3879 // clear last_Java_sp
3880 __ reset_last_Java_frame();
3882 // Check for exceptions
3883 Label pending;
3885 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), O1);
3886 __ br_notnull_short(O1, Assembler::pn, pending);
3888 // get the returned Method*
3890 __ get_vm_result_2(G5_method);
3891 __ stx(G5_method, SP, RegisterSaver::G5_offset()+STACK_BIAS);
3893 // O0 is where we want to jump, overwrite G3 which is saved and scratch
3895 __ stx(O0, SP, RegisterSaver::G3_offset()+STACK_BIAS);
3897 RegisterSaver::restore_live_registers(masm);
3899 // We are back the the original state on entry and ready to go.
3901 __ JMP(G3, 0);
3902 __ delayed()->nop();
3904 // Pending exception after the safepoint
3906 __ bind(pending);
3908 RegisterSaver::restore_live_registers(masm);
3910 // We are back the the original state on entry.
3912 // Tail-call forward_exception_entry, with the issuing PC in O7,
3913 // so it looks like the original nmethod called forward_exception_entry.
3914 __ set((intptr_t)StubRoutines::forward_exception_entry(), O0);
3915 __ JMP(O0, 0);
3916 __ delayed()->nop();
3918 // -------------
3919 // make sure all code is generated
3920 masm->flush();
3922 // return the blob
3923 // frame_size_words or bytes??
3924 return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_words, oop_maps, true);
3925 }