Wed, 03 Apr 2013 11:12:57 -0700
8011102: Clear AVX registers after return from JNI call
Summary: Execute vzeroupper instruction after JNI call and on exits in jit compiled code which use 256bit vectors.
Reviewed-by: roland
1 /*
2 * Copyright (c) 1999, 2012, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/macroAssembler.hpp"
27 #include "asm/macroAssembler.inline.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "nativeInst_x86.hpp"
30 #include "oops/instanceOop.hpp"
31 #include "oops/method.hpp"
32 #include "oops/objArrayKlass.hpp"
33 #include "oops/oop.inline.hpp"
34 #include "prims/methodHandles.hpp"
35 #include "runtime/frame.inline.hpp"
36 #include "runtime/handles.inline.hpp"
37 #include "runtime/sharedRuntime.hpp"
38 #include "runtime/stubCodeGenerator.hpp"
39 #include "runtime/stubRoutines.hpp"
40 #include "runtime/thread.inline.hpp"
41 #include "utilities/top.hpp"
42 #ifdef COMPILER2
43 #include "opto/runtime.hpp"
44 #endif
46 // Declaration and definition of StubGenerator (no .hpp file).
47 // For a more detailed description of the stub routine structure
48 // see the comment in stubRoutines.hpp
50 #define __ _masm->
51 #define a__ ((Assembler*)_masm)->
53 #ifdef PRODUCT
54 #define BLOCK_COMMENT(str) /* nothing */
55 #else
56 #define BLOCK_COMMENT(str) __ block_comment(str)
57 #endif
59 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":")
61 const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions
62 const int FPU_CNTRL_WRD_MASK = 0xFFFF;
64 // -------------------------------------------------------------------------------------------------------------------------
65 // Stub Code definitions
67 static address handle_unsafe_access() {
68 JavaThread* thread = JavaThread::current();
69 address pc = thread->saved_exception_pc();
70 // pc is the instruction which we must emulate
71 // doing a no-op is fine: return garbage from the load
72 // therefore, compute npc
73 address npc = Assembler::locate_next_instruction(pc);
75 // request an async exception
76 thread->set_pending_unsafe_access_error();
78 // return address of next instruction to execute
79 return npc;
80 }
82 class StubGenerator: public StubCodeGenerator {
83 private:
85 #ifdef PRODUCT
86 #define inc_counter_np(counter) (0)
87 #else
88 void inc_counter_np_(int& counter) {
89 __ incrementl(ExternalAddress((address)&counter));
90 }
91 #define inc_counter_np(counter) \
92 BLOCK_COMMENT("inc_counter " #counter); \
93 inc_counter_np_(counter);
94 #endif //PRODUCT
96 void inc_copy_counter_np(BasicType t) {
97 #ifndef PRODUCT
98 switch (t) {
99 case T_BYTE: inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); return;
100 case T_SHORT: inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); return;
101 case T_INT: inc_counter_np(SharedRuntime::_jint_array_copy_ctr); return;
102 case T_LONG: inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); return;
103 case T_OBJECT: inc_counter_np(SharedRuntime::_oop_array_copy_ctr); return;
104 }
105 ShouldNotReachHere();
106 #endif //PRODUCT
107 }
109 //------------------------------------------------------------------------------------------------------------------------
110 // Call stubs are used to call Java from C
111 //
112 // [ return_from_Java ] <--- rsp
113 // [ argument word n ]
114 // ...
115 // -N [ argument word 1 ]
116 // -7 [ Possible padding for stack alignment ]
117 // -6 [ Possible padding for stack alignment ]
118 // -5 [ Possible padding for stack alignment ]
119 // -4 [ mxcsr save ] <--- rsp_after_call
120 // -3 [ saved rbx, ]
121 // -2 [ saved rsi ]
122 // -1 [ saved rdi ]
123 // 0 [ saved rbp, ] <--- rbp,
124 // 1 [ return address ]
125 // 2 [ ptr. to call wrapper ]
126 // 3 [ result ]
127 // 4 [ result_type ]
128 // 5 [ method ]
129 // 6 [ entry_point ]
130 // 7 [ parameters ]
131 // 8 [ parameter_size ]
132 // 9 [ thread ]
135 address generate_call_stub(address& return_address) {
136 StubCodeMark mark(this, "StubRoutines", "call_stub");
137 address start = __ pc();
139 // stub code parameters / addresses
140 assert(frame::entry_frame_call_wrapper_offset == 2, "adjust this code");
141 bool sse_save = false;
142 const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_catch_exception()!
143 const int locals_count_in_bytes (4*wordSize);
144 const Address mxcsr_save (rbp, -4 * wordSize);
145 const Address saved_rbx (rbp, -3 * wordSize);
146 const Address saved_rsi (rbp, -2 * wordSize);
147 const Address saved_rdi (rbp, -1 * wordSize);
148 const Address result (rbp, 3 * wordSize);
149 const Address result_type (rbp, 4 * wordSize);
150 const Address method (rbp, 5 * wordSize);
151 const Address entry_point (rbp, 6 * wordSize);
152 const Address parameters (rbp, 7 * wordSize);
153 const Address parameter_size(rbp, 8 * wordSize);
154 const Address thread (rbp, 9 * wordSize); // same as in generate_catch_exception()!
155 sse_save = UseSSE > 0;
157 // stub code
158 __ enter();
159 __ movptr(rcx, parameter_size); // parameter counter
160 __ shlptr(rcx, Interpreter::logStackElementSize); // convert parameter count to bytes
161 __ addptr(rcx, locals_count_in_bytes); // reserve space for register saves
162 __ subptr(rsp, rcx);
163 __ andptr(rsp, -(StackAlignmentInBytes)); // Align stack
165 // save rdi, rsi, & rbx, according to C calling conventions
166 __ movptr(saved_rdi, rdi);
167 __ movptr(saved_rsi, rsi);
168 __ movptr(saved_rbx, rbx);
169 // save and initialize %mxcsr
170 if (sse_save) {
171 Label skip_ldmx;
172 __ stmxcsr(mxcsr_save);
173 __ movl(rax, mxcsr_save);
174 __ andl(rax, MXCSR_MASK); // Only check control and mask bits
175 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
176 __ cmp32(rax, mxcsr_std);
177 __ jcc(Assembler::equal, skip_ldmx);
178 __ ldmxcsr(mxcsr_std);
179 __ bind(skip_ldmx);
180 }
182 // make sure the control word is correct.
183 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
185 #ifdef ASSERT
186 // make sure we have no pending exceptions
187 { Label L;
188 __ movptr(rcx, thread);
189 __ cmpptr(Address(rcx, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
190 __ jcc(Assembler::equal, L);
191 __ stop("StubRoutines::call_stub: entered with pending exception");
192 __ bind(L);
193 }
194 #endif
196 // pass parameters if any
197 BLOCK_COMMENT("pass parameters if any");
198 Label parameters_done;
199 __ movl(rcx, parameter_size); // parameter counter
200 __ testl(rcx, rcx);
201 __ jcc(Assembler::zero, parameters_done);
203 // parameter passing loop
205 Label loop;
206 // Copy Java parameters in reverse order (receiver last)
207 // Note that the argument order is inverted in the process
208 // source is rdx[rcx: N-1..0]
209 // dest is rsp[rbx: 0..N-1]
211 __ movptr(rdx, parameters); // parameter pointer
212 __ xorptr(rbx, rbx);
214 __ BIND(loop);
216 // get parameter
217 __ movptr(rax, Address(rdx, rcx, Interpreter::stackElementScale(), -wordSize));
218 __ movptr(Address(rsp, rbx, Interpreter::stackElementScale(),
219 Interpreter::expr_offset_in_bytes(0)), rax); // store parameter
220 __ increment(rbx);
221 __ decrement(rcx);
222 __ jcc(Assembler::notZero, loop);
224 // call Java function
225 __ BIND(parameters_done);
226 __ movptr(rbx, method); // get Method*
227 __ movptr(rax, entry_point); // get entry_point
228 __ mov(rsi, rsp); // set sender sp
229 BLOCK_COMMENT("call Java function");
230 __ call(rax);
232 BLOCK_COMMENT("call_stub_return_address:");
233 return_address = __ pc();
235 #ifdef COMPILER2
236 {
237 Label L_skip;
238 if (UseSSE >= 2) {
239 __ verify_FPU(0, "call_stub_return");
240 } else {
241 for (int i = 1; i < 8; i++) {
242 __ ffree(i);
243 }
245 // UseSSE <= 1 so double result should be left on TOS
246 __ movl(rsi, result_type);
247 __ cmpl(rsi, T_DOUBLE);
248 __ jcc(Assembler::equal, L_skip);
249 if (UseSSE == 0) {
250 // UseSSE == 0 so float result should be left on TOS
251 __ cmpl(rsi, T_FLOAT);
252 __ jcc(Assembler::equal, L_skip);
253 }
254 __ ffree(0);
255 }
256 __ BIND(L_skip);
257 }
258 #endif // COMPILER2
260 // store result depending on type
261 // (everything that is not T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT)
262 __ movptr(rdi, result);
263 Label is_long, is_float, is_double, exit;
264 __ movl(rsi, result_type);
265 __ cmpl(rsi, T_LONG);
266 __ jcc(Assembler::equal, is_long);
267 __ cmpl(rsi, T_FLOAT);
268 __ jcc(Assembler::equal, is_float);
269 __ cmpl(rsi, T_DOUBLE);
270 __ jcc(Assembler::equal, is_double);
272 // handle T_INT case
273 __ movl(Address(rdi, 0), rax);
274 __ BIND(exit);
276 // check that FPU stack is empty
277 __ verify_FPU(0, "generate_call_stub");
279 // pop parameters
280 __ lea(rsp, rsp_after_call);
282 // restore %mxcsr
283 if (sse_save) {
284 __ ldmxcsr(mxcsr_save);
285 }
287 // restore rdi, rsi and rbx,
288 __ movptr(rbx, saved_rbx);
289 __ movptr(rsi, saved_rsi);
290 __ movptr(rdi, saved_rdi);
291 __ addptr(rsp, 4*wordSize);
293 // return
294 __ pop(rbp);
295 __ ret(0);
297 // handle return types different from T_INT
298 __ BIND(is_long);
299 __ movl(Address(rdi, 0 * wordSize), rax);
300 __ movl(Address(rdi, 1 * wordSize), rdx);
301 __ jmp(exit);
303 __ BIND(is_float);
304 // interpreter uses xmm0 for return values
305 if (UseSSE >= 1) {
306 __ movflt(Address(rdi, 0), xmm0);
307 } else {
308 __ fstp_s(Address(rdi, 0));
309 }
310 __ jmp(exit);
312 __ BIND(is_double);
313 // interpreter uses xmm0 for return values
314 if (UseSSE >= 2) {
315 __ movdbl(Address(rdi, 0), xmm0);
316 } else {
317 __ fstp_d(Address(rdi, 0));
318 }
319 __ jmp(exit);
321 return start;
322 }
325 //------------------------------------------------------------------------------------------------------------------------
326 // Return point for a Java call if there's an exception thrown in Java code.
327 // The exception is caught and transformed into a pending exception stored in
328 // JavaThread that can be tested from within the VM.
329 //
330 // Note: Usually the parameters are removed by the callee. In case of an exception
331 // crossing an activation frame boundary, that is not the case if the callee
332 // is compiled code => need to setup the rsp.
333 //
334 // rax,: exception oop
336 address generate_catch_exception() {
337 StubCodeMark mark(this, "StubRoutines", "catch_exception");
338 const Address rsp_after_call(rbp, -4 * wordSize); // same as in generate_call_stub()!
339 const Address thread (rbp, 9 * wordSize); // same as in generate_call_stub()!
340 address start = __ pc();
342 // get thread directly
343 __ movptr(rcx, thread);
344 #ifdef ASSERT
345 // verify that threads correspond
346 { Label L;
347 __ get_thread(rbx);
348 __ cmpptr(rbx, rcx);
349 __ jcc(Assembler::equal, L);
350 __ stop("StubRoutines::catch_exception: threads must correspond");
351 __ bind(L);
352 }
353 #endif
354 // set pending exception
355 __ verify_oop(rax);
356 __ movptr(Address(rcx, Thread::pending_exception_offset()), rax );
357 __ lea(Address(rcx, Thread::exception_file_offset ()),
358 ExternalAddress((address)__FILE__));
359 __ movl(Address(rcx, Thread::exception_line_offset ()), __LINE__ );
360 // complete return to VM
361 assert(StubRoutines::_call_stub_return_address != NULL, "_call_stub_return_address must have been generated before");
362 __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address));
364 return start;
365 }
368 //------------------------------------------------------------------------------------------------------------------------
369 // Continuation point for runtime calls returning with a pending exception.
370 // The pending exception check happened in the runtime or native call stub.
371 // The pending exception in Thread is converted into a Java-level exception.
372 //
373 // Contract with Java-level exception handlers:
374 // rax: exception
375 // rdx: throwing pc
376 //
377 // NOTE: At entry of this stub, exception-pc must be on stack !!
379 address generate_forward_exception() {
380 StubCodeMark mark(this, "StubRoutines", "forward exception");
381 address start = __ pc();
382 const Register thread = rcx;
384 // other registers used in this stub
385 const Register exception_oop = rax;
386 const Register handler_addr = rbx;
387 const Register exception_pc = rdx;
389 // Upon entry, the sp points to the return address returning into Java
390 // (interpreted or compiled) code; i.e., the return address becomes the
391 // throwing pc.
392 //
393 // Arguments pushed before the runtime call are still on the stack but
394 // the exception handler will reset the stack pointer -> ignore them.
395 // A potential result in registers can be ignored as well.
397 #ifdef ASSERT
398 // make sure this code is only executed if there is a pending exception
399 { Label L;
400 __ get_thread(thread);
401 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
402 __ jcc(Assembler::notEqual, L);
403 __ stop("StubRoutines::forward exception: no pending exception (1)");
404 __ bind(L);
405 }
406 #endif
408 // compute exception handler into rbx,
409 __ get_thread(thread);
410 __ movptr(exception_pc, Address(rsp, 0));
411 BLOCK_COMMENT("call exception_handler_for_return_address");
412 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), thread, exception_pc);
413 __ mov(handler_addr, rax);
415 // setup rax & rdx, remove return address & clear pending exception
416 __ get_thread(thread);
417 __ pop(exception_pc);
418 __ movptr(exception_oop, Address(thread, Thread::pending_exception_offset()));
419 __ movptr(Address(thread, Thread::pending_exception_offset()), NULL_WORD);
421 #ifdef ASSERT
422 // make sure exception is set
423 { Label L;
424 __ testptr(exception_oop, exception_oop);
425 __ jcc(Assembler::notEqual, L);
426 __ stop("StubRoutines::forward exception: no pending exception (2)");
427 __ bind(L);
428 }
429 #endif
431 // Verify that there is really a valid exception in RAX.
432 __ verify_oop(exception_oop);
434 // continue at exception handler (return address removed)
435 // rax: exception
436 // rbx: exception handler
437 // rdx: throwing pc
438 __ jmp(handler_addr);
440 return start;
441 }
444 //----------------------------------------------------------------------------------------------------
445 // Support for jint Atomic::xchg(jint exchange_value, volatile jint* dest)
446 //
447 // xchg exists as far back as 8086, lock needed for MP only
448 // Stack layout immediately after call:
449 //
450 // 0 [ret addr ] <--- rsp
451 // 1 [ ex ]
452 // 2 [ dest ]
453 //
454 // Result: *dest <- ex, return (old *dest)
455 //
456 // Note: win32 does not currently use this code
458 address generate_atomic_xchg() {
459 StubCodeMark mark(this, "StubRoutines", "atomic_xchg");
460 address start = __ pc();
462 __ push(rdx);
463 Address exchange(rsp, 2 * wordSize);
464 Address dest_addr(rsp, 3 * wordSize);
465 __ movl(rax, exchange);
466 __ movptr(rdx, dest_addr);
467 __ xchgl(rax, Address(rdx, 0));
468 __ pop(rdx);
469 __ ret(0);
471 return start;
472 }
474 //----------------------------------------------------------------------------------------------------
475 // Support for void verify_mxcsr()
476 //
477 // This routine is used with -Xcheck:jni to verify that native
478 // JNI code does not return to Java code without restoring the
479 // MXCSR register to our expected state.
482 address generate_verify_mxcsr() {
483 StubCodeMark mark(this, "StubRoutines", "verify_mxcsr");
484 address start = __ pc();
486 const Address mxcsr_save(rsp, 0);
488 if (CheckJNICalls && UseSSE > 0 ) {
489 Label ok_ret;
490 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
491 __ push(rax);
492 __ subptr(rsp, wordSize); // allocate a temp location
493 __ stmxcsr(mxcsr_save);
494 __ movl(rax, mxcsr_save);
495 __ andl(rax, MXCSR_MASK);
496 __ cmp32(rax, mxcsr_std);
497 __ jcc(Assembler::equal, ok_ret);
499 __ warn("MXCSR changed by native JNI code.");
501 __ ldmxcsr(mxcsr_std);
503 __ bind(ok_ret);
504 __ addptr(rsp, wordSize);
505 __ pop(rax);
506 }
508 __ ret(0);
510 return start;
511 }
514 //---------------------------------------------------------------------------
515 // Support for void verify_fpu_cntrl_wrd()
516 //
517 // This routine is used with -Xcheck:jni to verify that native
518 // JNI code does not return to Java code without restoring the
519 // FP control word to our expected state.
521 address generate_verify_fpu_cntrl_wrd() {
522 StubCodeMark mark(this, "StubRoutines", "verify_spcw");
523 address start = __ pc();
525 const Address fpu_cntrl_wrd_save(rsp, 0);
527 if (CheckJNICalls) {
528 Label ok_ret;
529 __ push(rax);
530 __ subptr(rsp, wordSize); // allocate a temp location
531 __ fnstcw(fpu_cntrl_wrd_save);
532 __ movl(rax, fpu_cntrl_wrd_save);
533 __ andl(rax, FPU_CNTRL_WRD_MASK);
534 ExternalAddress fpu_std(StubRoutines::addr_fpu_cntrl_wrd_std());
535 __ cmp32(rax, fpu_std);
536 __ jcc(Assembler::equal, ok_ret);
538 __ warn("Floating point control word changed by native JNI code.");
540 __ fldcw(fpu_std);
542 __ bind(ok_ret);
543 __ addptr(rsp, wordSize);
544 __ pop(rax);
545 }
547 __ ret(0);
549 return start;
550 }
552 //---------------------------------------------------------------------------
553 // Wrapper for slow-case handling of double-to-integer conversion
554 // d2i or f2i fast case failed either because it is nan or because
555 // of under/overflow.
556 // Input: FPU TOS: float value
557 // Output: rax, (rdx): integer (long) result
559 address generate_d2i_wrapper(BasicType t, address fcn) {
560 StubCodeMark mark(this, "StubRoutines", "d2i_wrapper");
561 address start = __ pc();
563 // Capture info about frame layout
564 enum layout { FPUState_off = 0,
565 rbp_off = FPUStateSizeInWords,
566 rdi_off,
567 rsi_off,
568 rcx_off,
569 rbx_off,
570 saved_argument_off,
571 saved_argument_off2, // 2nd half of double
572 framesize
573 };
575 assert(FPUStateSizeInWords == 27, "update stack layout");
577 // Save outgoing argument to stack across push_FPU_state()
578 __ subptr(rsp, wordSize * 2);
579 __ fstp_d(Address(rsp, 0));
581 // Save CPU & FPU state
582 __ push(rbx);
583 __ push(rcx);
584 __ push(rsi);
585 __ push(rdi);
586 __ push(rbp);
587 __ push_FPU_state();
589 // push_FPU_state() resets the FP top of stack
590 // Load original double into FP top of stack
591 __ fld_d(Address(rsp, saved_argument_off * wordSize));
592 // Store double into stack as outgoing argument
593 __ subptr(rsp, wordSize*2);
594 __ fst_d(Address(rsp, 0));
596 // Prepare FPU for doing math in C-land
597 __ empty_FPU_stack();
598 // Call the C code to massage the double. Result in EAX
599 if (t == T_INT)
600 { BLOCK_COMMENT("SharedRuntime::d2i"); }
601 else if (t == T_LONG)
602 { BLOCK_COMMENT("SharedRuntime::d2l"); }
603 __ call_VM_leaf( fcn, 2 );
605 // Restore CPU & FPU state
606 __ pop_FPU_state();
607 __ pop(rbp);
608 __ pop(rdi);
609 __ pop(rsi);
610 __ pop(rcx);
611 __ pop(rbx);
612 __ addptr(rsp, wordSize * 2);
614 __ ret(0);
616 return start;
617 }
620 //---------------------------------------------------------------------------
621 // The following routine generates a subroutine to throw an asynchronous
622 // UnknownError when an unsafe access gets a fault that could not be
623 // reasonably prevented by the programmer. (Example: SIGBUS/OBJERR.)
624 address generate_handler_for_unsafe_access() {
625 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access");
626 address start = __ pc();
628 __ push(0); // hole for return address-to-be
629 __ pusha(); // push registers
630 Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord);
631 BLOCK_COMMENT("call handle_unsafe_access");
632 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access)));
633 __ movptr(next_pc, rax); // stuff next address
634 __ popa();
635 __ ret(0); // jump to next address
637 return start;
638 }
641 //----------------------------------------------------------------------------------------------------
642 // Non-destructive plausibility checks for oops
644 address generate_verify_oop() {
645 StubCodeMark mark(this, "StubRoutines", "verify_oop");
646 address start = __ pc();
648 // Incoming arguments on stack after saving rax,:
649 //
650 // [tos ]: saved rdx
651 // [tos + 1]: saved EFLAGS
652 // [tos + 2]: return address
653 // [tos + 3]: char* error message
654 // [tos + 4]: oop object to verify
655 // [tos + 5]: saved rax, - saved by caller and bashed
657 Label exit, error;
658 __ pushf();
659 __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr()));
660 __ push(rdx); // save rdx
661 // make sure object is 'reasonable'
662 __ movptr(rax, Address(rsp, 4 * wordSize)); // get object
663 __ testptr(rax, rax);
664 __ jcc(Assembler::zero, exit); // if obj is NULL it is ok
666 // Check if the oop is in the right area of memory
667 const int oop_mask = Universe::verify_oop_mask();
668 const int oop_bits = Universe::verify_oop_bits();
669 __ mov(rdx, rax);
670 __ andptr(rdx, oop_mask);
671 __ cmpptr(rdx, oop_bits);
672 __ jcc(Assembler::notZero, error);
674 // make sure klass is 'reasonable', which is not zero.
675 __ movptr(rax, Address(rax, oopDesc::klass_offset_in_bytes())); // get klass
676 __ testptr(rax, rax);
677 __ jcc(Assembler::zero, error); // if klass is NULL it is broken
678 // TODO: Future assert that klass is lower 4g memory for UseCompressedKlassPointers
680 // return if everything seems ok
681 __ bind(exit);
682 __ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back
683 __ pop(rdx); // restore rdx
684 __ popf(); // restore EFLAGS
685 __ ret(3 * wordSize); // pop arguments
687 // handle errors
688 __ bind(error);
689 __ movptr(rax, Address(rsp, 5 * wordSize)); // get saved rax, back
690 __ pop(rdx); // get saved rdx back
691 __ popf(); // get saved EFLAGS off stack -- will be ignored
692 __ pusha(); // push registers (eip = return address & msg are already pushed)
693 BLOCK_COMMENT("call MacroAssembler::debug");
694 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug32)));
695 __ popa();
696 __ ret(3 * wordSize); // pop arguments
697 return start;
698 }
700 //
701 // Generate pre-barrier for array stores
702 //
703 // Input:
704 // start - starting address
705 // count - element count
706 void gen_write_ref_array_pre_barrier(Register start, Register count, bool uninitialized_target) {
707 assert_different_registers(start, count);
708 BarrierSet* bs = Universe::heap()->barrier_set();
709 switch (bs->kind()) {
710 case BarrierSet::G1SATBCT:
711 case BarrierSet::G1SATBCTLogging:
712 // With G1, don't generate the call if we statically know that the target in uninitialized
713 if (!uninitialized_target) {
714 __ pusha(); // push registers
715 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre),
716 start, count);
717 __ popa();
718 }
719 break;
720 case BarrierSet::CardTableModRef:
721 case BarrierSet::CardTableExtension:
722 case BarrierSet::ModRef:
723 break;
724 default :
725 ShouldNotReachHere();
727 }
728 }
731 //
732 // Generate a post-barrier for an array store
733 //
734 // start - starting address
735 // count - element count
736 //
737 // The two input registers are overwritten.
738 //
739 void gen_write_ref_array_post_barrier(Register start, Register count) {
740 BarrierSet* bs = Universe::heap()->barrier_set();
741 assert_different_registers(start, count);
742 switch (bs->kind()) {
743 case BarrierSet::G1SATBCT:
744 case BarrierSet::G1SATBCTLogging:
745 {
746 __ pusha(); // push registers
747 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post),
748 start, count);
749 __ popa();
750 }
751 break;
753 case BarrierSet::CardTableModRef:
754 case BarrierSet::CardTableExtension:
755 {
756 CardTableModRefBS* ct = (CardTableModRefBS*)bs;
757 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code");
759 Label L_loop;
760 const Register end = count; // elements count; end == start+count-1
761 assert_different_registers(start, end);
763 __ lea(end, Address(start, count, Address::times_ptr, -wordSize));
764 __ shrptr(start, CardTableModRefBS::card_shift);
765 __ shrptr(end, CardTableModRefBS::card_shift);
766 __ subptr(end, start); // end --> count
767 __ BIND(L_loop);
768 intptr_t disp = (intptr_t) ct->byte_map_base;
769 Address cardtable(start, count, Address::times_1, disp);
770 __ movb(cardtable, 0);
771 __ decrement(count);
772 __ jcc(Assembler::greaterEqual, L_loop);
773 }
774 break;
775 case BarrierSet::ModRef:
776 break;
777 default :
778 ShouldNotReachHere();
780 }
781 }
784 // Copy 64 bytes chunks
785 //
786 // Inputs:
787 // from - source array address
788 // to_from - destination array address - from
789 // qword_count - 8-bytes element count, negative
790 //
791 void xmm_copy_forward(Register from, Register to_from, Register qword_count) {
792 assert( UseSSE >= 2, "supported cpu only" );
793 Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
794 // Copy 64-byte chunks
795 __ jmpb(L_copy_64_bytes);
796 __ align(OptoLoopAlignment);
797 __ BIND(L_copy_64_bytes_loop);
799 if (UseUnalignedLoadStores) {
800 if (UseAVX >= 2) {
801 __ vmovdqu(xmm0, Address(from, 0));
802 __ vmovdqu(Address(from, to_from, Address::times_1, 0), xmm0);
803 __ vmovdqu(xmm1, Address(from, 32));
804 __ vmovdqu(Address(from, to_from, Address::times_1, 32), xmm1);
805 } else {
806 __ movdqu(xmm0, Address(from, 0));
807 __ movdqu(Address(from, to_from, Address::times_1, 0), xmm0);
808 __ movdqu(xmm1, Address(from, 16));
809 __ movdqu(Address(from, to_from, Address::times_1, 16), xmm1);
810 __ movdqu(xmm2, Address(from, 32));
811 __ movdqu(Address(from, to_from, Address::times_1, 32), xmm2);
812 __ movdqu(xmm3, Address(from, 48));
813 __ movdqu(Address(from, to_from, Address::times_1, 48), xmm3);
814 }
815 } else {
816 __ movq(xmm0, Address(from, 0));
817 __ movq(Address(from, to_from, Address::times_1, 0), xmm0);
818 __ movq(xmm1, Address(from, 8));
819 __ movq(Address(from, to_from, Address::times_1, 8), xmm1);
820 __ movq(xmm2, Address(from, 16));
821 __ movq(Address(from, to_from, Address::times_1, 16), xmm2);
822 __ movq(xmm3, Address(from, 24));
823 __ movq(Address(from, to_from, Address::times_1, 24), xmm3);
824 __ movq(xmm4, Address(from, 32));
825 __ movq(Address(from, to_from, Address::times_1, 32), xmm4);
826 __ movq(xmm5, Address(from, 40));
827 __ movq(Address(from, to_from, Address::times_1, 40), xmm5);
828 __ movq(xmm6, Address(from, 48));
829 __ movq(Address(from, to_from, Address::times_1, 48), xmm6);
830 __ movq(xmm7, Address(from, 56));
831 __ movq(Address(from, to_from, Address::times_1, 56), xmm7);
832 }
834 __ addl(from, 64);
835 __ BIND(L_copy_64_bytes);
836 __ subl(qword_count, 8);
837 __ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop);
839 if (UseUnalignedLoadStores && (UseAVX >= 2)) {
840 // clean upper bits of YMM registers
841 __ vzeroupper();
842 }
843 __ addl(qword_count, 8);
844 __ jccb(Assembler::zero, L_exit);
845 //
846 // length is too short, just copy qwords
847 //
848 __ BIND(L_copy_8_bytes);
849 __ movq(xmm0, Address(from, 0));
850 __ movq(Address(from, to_from, Address::times_1), xmm0);
851 __ addl(from, 8);
852 __ decrement(qword_count);
853 __ jcc(Assembler::greater, L_copy_8_bytes);
854 __ BIND(L_exit);
855 }
857 // Copy 64 bytes chunks
858 //
859 // Inputs:
860 // from - source array address
861 // to_from - destination array address - from
862 // qword_count - 8-bytes element count, negative
863 //
864 void mmx_copy_forward(Register from, Register to_from, Register qword_count) {
865 assert( VM_Version::supports_mmx(), "supported cpu only" );
866 Label L_copy_64_bytes_loop, L_copy_64_bytes, L_copy_8_bytes, L_exit;
867 // Copy 64-byte chunks
868 __ jmpb(L_copy_64_bytes);
869 __ align(OptoLoopAlignment);
870 __ BIND(L_copy_64_bytes_loop);
871 __ movq(mmx0, Address(from, 0));
872 __ movq(mmx1, Address(from, 8));
873 __ movq(mmx2, Address(from, 16));
874 __ movq(Address(from, to_from, Address::times_1, 0), mmx0);
875 __ movq(mmx3, Address(from, 24));
876 __ movq(Address(from, to_from, Address::times_1, 8), mmx1);
877 __ movq(mmx4, Address(from, 32));
878 __ movq(Address(from, to_from, Address::times_1, 16), mmx2);
879 __ movq(mmx5, Address(from, 40));
880 __ movq(Address(from, to_from, Address::times_1, 24), mmx3);
881 __ movq(mmx6, Address(from, 48));
882 __ movq(Address(from, to_from, Address::times_1, 32), mmx4);
883 __ movq(mmx7, Address(from, 56));
884 __ movq(Address(from, to_from, Address::times_1, 40), mmx5);
885 __ movq(Address(from, to_from, Address::times_1, 48), mmx6);
886 __ movq(Address(from, to_from, Address::times_1, 56), mmx7);
887 __ addptr(from, 64);
888 __ BIND(L_copy_64_bytes);
889 __ subl(qword_count, 8);
890 __ jcc(Assembler::greaterEqual, L_copy_64_bytes_loop);
891 __ addl(qword_count, 8);
892 __ jccb(Assembler::zero, L_exit);
893 //
894 // length is too short, just copy qwords
895 //
896 __ BIND(L_copy_8_bytes);
897 __ movq(mmx0, Address(from, 0));
898 __ movq(Address(from, to_from, Address::times_1), mmx0);
899 __ addptr(from, 8);
900 __ decrement(qword_count);
901 __ jcc(Assembler::greater, L_copy_8_bytes);
902 __ BIND(L_exit);
903 __ emms();
904 }
906 address generate_disjoint_copy(BasicType t, bool aligned,
907 Address::ScaleFactor sf,
908 address* entry, const char *name,
909 bool dest_uninitialized = false) {
910 __ align(CodeEntryAlignment);
911 StubCodeMark mark(this, "StubRoutines", name);
912 address start = __ pc();
914 Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte;
915 Label L_copy_2_bytes, L_copy_4_bytes, L_copy_64_bytes;
917 int shift = Address::times_ptr - sf;
919 const Register from = rsi; // source array address
920 const Register to = rdi; // destination array address
921 const Register count = rcx; // elements count
922 const Register to_from = to; // (to - from)
923 const Register saved_to = rdx; // saved destination array address
925 __ enter(); // required for proper stackwalking of RuntimeStub frame
926 __ push(rsi);
927 __ push(rdi);
928 __ movptr(from , Address(rsp, 12+ 4));
929 __ movptr(to , Address(rsp, 12+ 8));
930 __ movl(count, Address(rsp, 12+ 12));
932 if (entry != NULL) {
933 *entry = __ pc(); // Entry point from conjoint arraycopy stub.
934 BLOCK_COMMENT("Entry:");
935 }
937 if (t == T_OBJECT) {
938 __ testl(count, count);
939 __ jcc(Assembler::zero, L_0_count);
940 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized);
941 __ mov(saved_to, to); // save 'to'
942 }
944 __ subptr(to, from); // to --> to_from
945 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
946 __ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp
947 if (!UseUnalignedLoadStores && !aligned && (t == T_BYTE || t == T_SHORT)) {
948 // align source address at 4 bytes address boundary
949 if (t == T_BYTE) {
950 // One byte misalignment happens only for byte arrays
951 __ testl(from, 1);
952 __ jccb(Assembler::zero, L_skip_align1);
953 __ movb(rax, Address(from, 0));
954 __ movb(Address(from, to_from, Address::times_1, 0), rax);
955 __ increment(from);
956 __ decrement(count);
957 __ BIND(L_skip_align1);
958 }
959 // Two bytes misalignment happens only for byte and short (char) arrays
960 __ testl(from, 2);
961 __ jccb(Assembler::zero, L_skip_align2);
962 __ movw(rax, Address(from, 0));
963 __ movw(Address(from, to_from, Address::times_1, 0), rax);
964 __ addptr(from, 2);
965 __ subl(count, 1<<(shift-1));
966 __ BIND(L_skip_align2);
967 }
968 if (!VM_Version::supports_mmx()) {
969 __ mov(rax, count); // save 'count'
970 __ shrl(count, shift); // bytes count
971 __ addptr(to_from, from);// restore 'to'
972 __ rep_mov();
973 __ subptr(to_from, from);// restore 'to_from'
974 __ mov(count, rax); // restore 'count'
975 __ jmpb(L_copy_2_bytes); // all dwords were copied
976 } else {
977 if (!UseUnalignedLoadStores) {
978 // align to 8 bytes, we know we are 4 byte aligned to start
979 __ testptr(from, 4);
980 __ jccb(Assembler::zero, L_copy_64_bytes);
981 __ movl(rax, Address(from, 0));
982 __ movl(Address(from, to_from, Address::times_1, 0), rax);
983 __ addptr(from, 4);
984 __ subl(count, 1<<shift);
985 }
986 __ BIND(L_copy_64_bytes);
987 __ mov(rax, count);
988 __ shrl(rax, shift+1); // 8 bytes chunk count
989 //
990 // Copy 8-byte chunks through MMX registers, 8 per iteration of the loop
991 //
992 if (UseXMMForArrayCopy) {
993 xmm_copy_forward(from, to_from, rax);
994 } else {
995 mmx_copy_forward(from, to_from, rax);
996 }
997 }
998 // copy tailing dword
999 __ BIND(L_copy_4_bytes);
1000 __ testl(count, 1<<shift);
1001 __ jccb(Assembler::zero, L_copy_2_bytes);
1002 __ movl(rax, Address(from, 0));
1003 __ movl(Address(from, to_from, Address::times_1, 0), rax);
1004 if (t == T_BYTE || t == T_SHORT) {
1005 __ addptr(from, 4);
1006 __ BIND(L_copy_2_bytes);
1007 // copy tailing word
1008 __ testl(count, 1<<(shift-1));
1009 __ jccb(Assembler::zero, L_copy_byte);
1010 __ movw(rax, Address(from, 0));
1011 __ movw(Address(from, to_from, Address::times_1, 0), rax);
1012 if (t == T_BYTE) {
1013 __ addptr(from, 2);
1014 __ BIND(L_copy_byte);
1015 // copy tailing byte
1016 __ testl(count, 1);
1017 __ jccb(Assembler::zero, L_exit);
1018 __ movb(rax, Address(from, 0));
1019 __ movb(Address(from, to_from, Address::times_1, 0), rax);
1020 __ BIND(L_exit);
1021 } else {
1022 __ BIND(L_copy_byte);
1023 }
1024 } else {
1025 __ BIND(L_copy_2_bytes);
1026 }
1028 if (t == T_OBJECT) {
1029 __ movl(count, Address(rsp, 12+12)); // reread 'count'
1030 __ mov(to, saved_to); // restore 'to'
1031 gen_write_ref_array_post_barrier(to, count);
1032 __ BIND(L_0_count);
1033 }
1034 inc_copy_counter_np(t);
1035 __ pop(rdi);
1036 __ pop(rsi);
1037 __ leave(); // required for proper stackwalking of RuntimeStub frame
1038 __ xorptr(rax, rax); // return 0
1039 __ ret(0);
1040 return start;
1041 }
1044 address generate_fill(BasicType t, bool aligned, const char *name) {
1045 __ align(CodeEntryAlignment);
1046 StubCodeMark mark(this, "StubRoutines", name);
1047 address start = __ pc();
1049 BLOCK_COMMENT("Entry:");
1051 const Register to = rdi; // source array address
1052 const Register value = rdx; // value
1053 const Register count = rsi; // elements count
1055 __ enter(); // required for proper stackwalking of RuntimeStub frame
1056 __ push(rsi);
1057 __ push(rdi);
1058 __ movptr(to , Address(rsp, 12+ 4));
1059 __ movl(value, Address(rsp, 12+ 8));
1060 __ movl(count, Address(rsp, 12+ 12));
1062 __ generate_fill(t, aligned, to, value, count, rax, xmm0);
1064 __ pop(rdi);
1065 __ pop(rsi);
1066 __ leave(); // required for proper stackwalking of RuntimeStub frame
1067 __ ret(0);
1068 return start;
1069 }
1071 address generate_conjoint_copy(BasicType t, bool aligned,
1072 Address::ScaleFactor sf,
1073 address nooverlap_target,
1074 address* entry, const char *name,
1075 bool dest_uninitialized = false) {
1076 __ align(CodeEntryAlignment);
1077 StubCodeMark mark(this, "StubRoutines", name);
1078 address start = __ pc();
1080 Label L_0_count, L_exit, L_skip_align1, L_skip_align2, L_copy_byte;
1081 Label L_copy_2_bytes, L_copy_4_bytes, L_copy_8_bytes, L_copy_8_bytes_loop;
1083 int shift = Address::times_ptr - sf;
1085 const Register src = rax; // source array address
1086 const Register dst = rdx; // destination array address
1087 const Register from = rsi; // source array address
1088 const Register to = rdi; // destination array address
1089 const Register count = rcx; // elements count
1090 const Register end = rax; // array end address
1092 __ enter(); // required for proper stackwalking of RuntimeStub frame
1093 __ push(rsi);
1094 __ push(rdi);
1095 __ movptr(src , Address(rsp, 12+ 4)); // from
1096 __ movptr(dst , Address(rsp, 12+ 8)); // to
1097 __ movl2ptr(count, Address(rsp, 12+12)); // count
1099 if (entry != NULL) {
1100 *entry = __ pc(); // Entry point from generic arraycopy stub.
1101 BLOCK_COMMENT("Entry:");
1102 }
1104 // nooverlap_target expects arguments in rsi and rdi.
1105 __ mov(from, src);
1106 __ mov(to , dst);
1108 // arrays overlap test: dispatch to disjoint stub if necessary.
1109 RuntimeAddress nooverlap(nooverlap_target);
1110 __ cmpptr(dst, src);
1111 __ lea(end, Address(src, count, sf, 0)); // src + count * elem_size
1112 __ jump_cc(Assembler::belowEqual, nooverlap);
1113 __ cmpptr(dst, end);
1114 __ jump_cc(Assembler::aboveEqual, nooverlap);
1116 if (t == T_OBJECT) {
1117 __ testl(count, count);
1118 __ jcc(Assembler::zero, L_0_count);
1119 gen_write_ref_array_pre_barrier(dst, count, dest_uninitialized);
1120 }
1122 // copy from high to low
1123 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
1124 __ jcc(Assembler::below, L_copy_4_bytes); // use unsigned cmp
1125 if (t == T_BYTE || t == T_SHORT) {
1126 // Align the end of destination array at 4 bytes address boundary
1127 __ lea(end, Address(dst, count, sf, 0));
1128 if (t == T_BYTE) {
1129 // One byte misalignment happens only for byte arrays
1130 __ testl(end, 1);
1131 __ jccb(Assembler::zero, L_skip_align1);
1132 __ decrement(count);
1133 __ movb(rdx, Address(from, count, sf, 0));
1134 __ movb(Address(to, count, sf, 0), rdx);
1135 __ BIND(L_skip_align1);
1136 }
1137 // Two bytes misalignment happens only for byte and short (char) arrays
1138 __ testl(end, 2);
1139 __ jccb(Assembler::zero, L_skip_align2);
1140 __ subptr(count, 1<<(shift-1));
1141 __ movw(rdx, Address(from, count, sf, 0));
1142 __ movw(Address(to, count, sf, 0), rdx);
1143 __ BIND(L_skip_align2);
1144 __ cmpl(count, 2<<shift); // Short arrays (< 8 bytes) copy by element
1145 __ jcc(Assembler::below, L_copy_4_bytes);
1146 }
1148 if (!VM_Version::supports_mmx()) {
1149 __ std();
1150 __ mov(rax, count); // Save 'count'
1151 __ mov(rdx, to); // Save 'to'
1152 __ lea(rsi, Address(from, count, sf, -4));
1153 __ lea(rdi, Address(to , count, sf, -4));
1154 __ shrptr(count, shift); // bytes count
1155 __ rep_mov();
1156 __ cld();
1157 __ mov(count, rax); // restore 'count'
1158 __ andl(count, (1<<shift)-1); // mask the number of rest elements
1159 __ movptr(from, Address(rsp, 12+4)); // reread 'from'
1160 __ mov(to, rdx); // restore 'to'
1161 __ jmpb(L_copy_2_bytes); // all dword were copied
1162 } else {
1163 // Align to 8 bytes the end of array. It is aligned to 4 bytes already.
1164 __ testptr(end, 4);
1165 __ jccb(Assembler::zero, L_copy_8_bytes);
1166 __ subl(count, 1<<shift);
1167 __ movl(rdx, Address(from, count, sf, 0));
1168 __ movl(Address(to, count, sf, 0), rdx);
1169 __ jmpb(L_copy_8_bytes);
1171 __ align(OptoLoopAlignment);
1172 // Move 8 bytes
1173 __ BIND(L_copy_8_bytes_loop);
1174 if (UseXMMForArrayCopy) {
1175 __ movq(xmm0, Address(from, count, sf, 0));
1176 __ movq(Address(to, count, sf, 0), xmm0);
1177 } else {
1178 __ movq(mmx0, Address(from, count, sf, 0));
1179 __ movq(Address(to, count, sf, 0), mmx0);
1180 }
1181 __ BIND(L_copy_8_bytes);
1182 __ subl(count, 2<<shift);
1183 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
1184 __ addl(count, 2<<shift);
1185 if (!UseXMMForArrayCopy) {
1186 __ emms();
1187 }
1188 }
1189 __ BIND(L_copy_4_bytes);
1190 // copy prefix qword
1191 __ testl(count, 1<<shift);
1192 __ jccb(Assembler::zero, L_copy_2_bytes);
1193 __ movl(rdx, Address(from, count, sf, -4));
1194 __ movl(Address(to, count, sf, -4), rdx);
1196 if (t == T_BYTE || t == T_SHORT) {
1197 __ subl(count, (1<<shift));
1198 __ BIND(L_copy_2_bytes);
1199 // copy prefix dword
1200 __ testl(count, 1<<(shift-1));
1201 __ jccb(Assembler::zero, L_copy_byte);
1202 __ movw(rdx, Address(from, count, sf, -2));
1203 __ movw(Address(to, count, sf, -2), rdx);
1204 if (t == T_BYTE) {
1205 __ subl(count, 1<<(shift-1));
1206 __ BIND(L_copy_byte);
1207 // copy prefix byte
1208 __ testl(count, 1);
1209 __ jccb(Assembler::zero, L_exit);
1210 __ movb(rdx, Address(from, 0));
1211 __ movb(Address(to, 0), rdx);
1212 __ BIND(L_exit);
1213 } else {
1214 __ BIND(L_copy_byte);
1215 }
1216 } else {
1217 __ BIND(L_copy_2_bytes);
1218 }
1219 if (t == T_OBJECT) {
1220 __ movl2ptr(count, Address(rsp, 12+12)); // reread count
1221 gen_write_ref_array_post_barrier(to, count);
1222 __ BIND(L_0_count);
1223 }
1224 inc_copy_counter_np(t);
1225 __ pop(rdi);
1226 __ pop(rsi);
1227 __ leave(); // required for proper stackwalking of RuntimeStub frame
1228 __ xorptr(rax, rax); // return 0
1229 __ ret(0);
1230 return start;
1231 }
1234 address generate_disjoint_long_copy(address* entry, const char *name) {
1235 __ align(CodeEntryAlignment);
1236 StubCodeMark mark(this, "StubRoutines", name);
1237 address start = __ pc();
1239 Label L_copy_8_bytes, L_copy_8_bytes_loop;
1240 const Register from = rax; // source array address
1241 const Register to = rdx; // destination array address
1242 const Register count = rcx; // elements count
1243 const Register to_from = rdx; // (to - from)
1245 __ enter(); // required for proper stackwalking of RuntimeStub frame
1246 __ movptr(from , Address(rsp, 8+0)); // from
1247 __ movptr(to , Address(rsp, 8+4)); // to
1248 __ movl2ptr(count, Address(rsp, 8+8)); // count
1250 *entry = __ pc(); // Entry point from conjoint arraycopy stub.
1251 BLOCK_COMMENT("Entry:");
1253 __ subptr(to, from); // to --> to_from
1254 if (VM_Version::supports_mmx()) {
1255 if (UseXMMForArrayCopy) {
1256 xmm_copy_forward(from, to_from, count);
1257 } else {
1258 mmx_copy_forward(from, to_from, count);
1259 }
1260 } else {
1261 __ jmpb(L_copy_8_bytes);
1262 __ align(OptoLoopAlignment);
1263 __ BIND(L_copy_8_bytes_loop);
1264 __ fild_d(Address(from, 0));
1265 __ fistp_d(Address(from, to_from, Address::times_1));
1266 __ addptr(from, 8);
1267 __ BIND(L_copy_8_bytes);
1268 __ decrement(count);
1269 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
1270 }
1271 inc_copy_counter_np(T_LONG);
1272 __ leave(); // required for proper stackwalking of RuntimeStub frame
1273 __ xorptr(rax, rax); // return 0
1274 __ ret(0);
1275 return start;
1276 }
1278 address generate_conjoint_long_copy(address nooverlap_target,
1279 address* entry, const char *name) {
1280 __ align(CodeEntryAlignment);
1281 StubCodeMark mark(this, "StubRoutines", name);
1282 address start = __ pc();
1284 Label L_copy_8_bytes, L_copy_8_bytes_loop;
1285 const Register from = rax; // source array address
1286 const Register to = rdx; // destination array address
1287 const Register count = rcx; // elements count
1288 const Register end_from = rax; // source array end address
1290 __ enter(); // required for proper stackwalking of RuntimeStub frame
1291 __ movptr(from , Address(rsp, 8+0)); // from
1292 __ movptr(to , Address(rsp, 8+4)); // to
1293 __ movl2ptr(count, Address(rsp, 8+8)); // count
1295 *entry = __ pc(); // Entry point from generic arraycopy stub.
1296 BLOCK_COMMENT("Entry:");
1298 // arrays overlap test
1299 __ cmpptr(to, from);
1300 RuntimeAddress nooverlap(nooverlap_target);
1301 __ jump_cc(Assembler::belowEqual, nooverlap);
1302 __ lea(end_from, Address(from, count, Address::times_8, 0));
1303 __ cmpptr(to, end_from);
1304 __ movptr(from, Address(rsp, 8)); // from
1305 __ jump_cc(Assembler::aboveEqual, nooverlap);
1307 __ jmpb(L_copy_8_bytes);
1309 __ align(OptoLoopAlignment);
1310 __ BIND(L_copy_8_bytes_loop);
1311 if (VM_Version::supports_mmx()) {
1312 if (UseXMMForArrayCopy) {
1313 __ movq(xmm0, Address(from, count, Address::times_8));
1314 __ movq(Address(to, count, Address::times_8), xmm0);
1315 } else {
1316 __ movq(mmx0, Address(from, count, Address::times_8));
1317 __ movq(Address(to, count, Address::times_8), mmx0);
1318 }
1319 } else {
1320 __ fild_d(Address(from, count, Address::times_8));
1321 __ fistp_d(Address(to, count, Address::times_8));
1322 }
1323 __ BIND(L_copy_8_bytes);
1324 __ decrement(count);
1325 __ jcc(Assembler::greaterEqual, L_copy_8_bytes_loop);
1327 if (VM_Version::supports_mmx() && !UseXMMForArrayCopy) {
1328 __ emms();
1329 }
1330 inc_copy_counter_np(T_LONG);
1331 __ leave(); // required for proper stackwalking of RuntimeStub frame
1332 __ xorptr(rax, rax); // return 0
1333 __ ret(0);
1334 return start;
1335 }
1338 // Helper for generating a dynamic type check.
1339 // The sub_klass must be one of {rbx, rdx, rsi}.
1340 // The temp is killed.
1341 void generate_type_check(Register sub_klass,
1342 Address& super_check_offset_addr,
1343 Address& super_klass_addr,
1344 Register temp,
1345 Label* L_success, Label* L_failure) {
1346 BLOCK_COMMENT("type_check:");
1348 Label L_fallthrough;
1349 #define LOCAL_JCC(assembler_con, label_ptr) \
1350 if (label_ptr != NULL) __ jcc(assembler_con, *(label_ptr)); \
1351 else __ jcc(assembler_con, L_fallthrough) /*omit semi*/
1353 // The following is a strange variation of the fast path which requires
1354 // one less register, because needed values are on the argument stack.
1355 // __ check_klass_subtype_fast_path(sub_klass, *super_klass*, temp,
1356 // L_success, L_failure, NULL);
1357 assert_different_registers(sub_klass, temp);
1359 int sc_offset = in_bytes(Klass::secondary_super_cache_offset());
1361 // if the pointers are equal, we are done (e.g., String[] elements)
1362 __ cmpptr(sub_klass, super_klass_addr);
1363 LOCAL_JCC(Assembler::equal, L_success);
1365 // check the supertype display:
1366 __ movl2ptr(temp, super_check_offset_addr);
1367 Address super_check_addr(sub_klass, temp, Address::times_1, 0);
1368 __ movptr(temp, super_check_addr); // load displayed supertype
1369 __ cmpptr(temp, super_klass_addr); // test the super type
1370 LOCAL_JCC(Assembler::equal, L_success);
1372 // if it was a primary super, we can just fail immediately
1373 __ cmpl(super_check_offset_addr, sc_offset);
1374 LOCAL_JCC(Assembler::notEqual, L_failure);
1376 // The repne_scan instruction uses fixed registers, which will get spilled.
1377 // We happen to know this works best when super_klass is in rax.
1378 Register super_klass = temp;
1379 __ movptr(super_klass, super_klass_addr);
1380 __ check_klass_subtype_slow_path(sub_klass, super_klass, noreg, noreg,
1381 L_success, L_failure);
1383 __ bind(L_fallthrough);
1385 if (L_success == NULL) { BLOCK_COMMENT("L_success:"); }
1386 if (L_failure == NULL) { BLOCK_COMMENT("L_failure:"); }
1388 #undef LOCAL_JCC
1389 }
1391 //
1392 // Generate checkcasting array copy stub
1393 //
1394 // Input:
1395 // 4(rsp) - source array address
1396 // 8(rsp) - destination array address
1397 // 12(rsp) - element count, can be zero
1398 // 16(rsp) - size_t ckoff (super_check_offset)
1399 // 20(rsp) - oop ckval (super_klass)
1400 //
1401 // Output:
1402 // rax, == 0 - success
1403 // rax, == -1^K - failure, where K is partial transfer count
1404 //
1405 address generate_checkcast_copy(const char *name, address* entry, bool dest_uninitialized = false) {
1406 __ align(CodeEntryAlignment);
1407 StubCodeMark mark(this, "StubRoutines", name);
1408 address start = __ pc();
1410 Label L_load_element, L_store_element, L_do_card_marks, L_done;
1412 // register use:
1413 // rax, rdx, rcx -- loop control (end_from, end_to, count)
1414 // rdi, rsi -- element access (oop, klass)
1415 // rbx, -- temp
1416 const Register from = rax; // source array address
1417 const Register to = rdx; // destination array address
1418 const Register length = rcx; // elements count
1419 const Register elem = rdi; // each oop copied
1420 const Register elem_klass = rsi; // each elem._klass (sub_klass)
1421 const Register temp = rbx; // lone remaining temp
1423 __ enter(); // required for proper stackwalking of RuntimeStub frame
1425 __ push(rsi);
1426 __ push(rdi);
1427 __ push(rbx);
1429 Address from_arg(rsp, 16+ 4); // from
1430 Address to_arg(rsp, 16+ 8); // to
1431 Address length_arg(rsp, 16+12); // elements count
1432 Address ckoff_arg(rsp, 16+16); // super_check_offset
1433 Address ckval_arg(rsp, 16+20); // super_klass
1435 // Load up:
1436 __ movptr(from, from_arg);
1437 __ movptr(to, to_arg);
1438 __ movl2ptr(length, length_arg);
1440 if (entry != NULL) {
1441 *entry = __ pc(); // Entry point from generic arraycopy stub.
1442 BLOCK_COMMENT("Entry:");
1443 }
1445 //---------------------------------------------------------------
1446 // Assembler stub will be used for this call to arraycopy
1447 // if the two arrays are subtypes of Object[] but the
1448 // destination array type is not equal to or a supertype
1449 // of the source type. Each element must be separately
1450 // checked.
1452 // Loop-invariant addresses. They are exclusive end pointers.
1453 Address end_from_addr(from, length, Address::times_ptr, 0);
1454 Address end_to_addr(to, length, Address::times_ptr, 0);
1456 Register end_from = from; // re-use
1457 Register end_to = to; // re-use
1458 Register count = length; // re-use
1460 // Loop-variant addresses. They assume post-incremented count < 0.
1461 Address from_element_addr(end_from, count, Address::times_ptr, 0);
1462 Address to_element_addr(end_to, count, Address::times_ptr, 0);
1463 Address elem_klass_addr(elem, oopDesc::klass_offset_in_bytes());
1465 // Copy from low to high addresses, indexed from the end of each array.
1466 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized);
1467 __ lea(end_from, end_from_addr);
1468 __ lea(end_to, end_to_addr);
1469 assert(length == count, ""); // else fix next line:
1470 __ negptr(count); // negate and test the length
1471 __ jccb(Assembler::notZero, L_load_element);
1473 // Empty array: Nothing to do.
1474 __ xorptr(rax, rax); // return 0 on (trivial) success
1475 __ jmp(L_done);
1477 // ======== begin loop ========
1478 // (Loop is rotated; its entry is L_load_element.)
1479 // Loop control:
1480 // for (count = -count; count != 0; count++)
1481 // Base pointers src, dst are biased by 8*count,to last element.
1482 __ align(OptoLoopAlignment);
1484 __ BIND(L_store_element);
1485 __ movptr(to_element_addr, elem); // store the oop
1486 __ increment(count); // increment the count toward zero
1487 __ jccb(Assembler::zero, L_do_card_marks);
1489 // ======== loop entry is here ========
1490 __ BIND(L_load_element);
1491 __ movptr(elem, from_element_addr); // load the oop
1492 __ testptr(elem, elem);
1493 __ jccb(Assembler::zero, L_store_element);
1495 // (Could do a trick here: Remember last successful non-null
1496 // element stored and make a quick oop equality check on it.)
1498 __ movptr(elem_klass, elem_klass_addr); // query the object klass
1499 generate_type_check(elem_klass, ckoff_arg, ckval_arg, temp,
1500 &L_store_element, NULL);
1501 // (On fall-through, we have failed the element type check.)
1502 // ======== end loop ========
1504 // It was a real error; we must depend on the caller to finish the job.
1505 // Register "count" = -1 * number of *remaining* oops, length_arg = *total* oops.
1506 // Emit GC store barriers for the oops we have copied (length_arg + count),
1507 // and report their number to the caller.
1508 __ addl(count, length_arg); // transfers = (length - remaining)
1509 __ movl2ptr(rax, count); // save the value
1510 __ notptr(rax); // report (-1^K) to caller
1511 __ movptr(to, to_arg); // reload
1512 assert_different_registers(to, count, rax);
1513 gen_write_ref_array_post_barrier(to, count);
1514 __ jmpb(L_done);
1516 // Come here on success only.
1517 __ BIND(L_do_card_marks);
1518 __ movl2ptr(count, length_arg);
1519 __ movptr(to, to_arg); // reload
1520 gen_write_ref_array_post_barrier(to, count);
1521 __ xorptr(rax, rax); // return 0 on success
1523 // Common exit point (success or failure).
1524 __ BIND(L_done);
1525 __ pop(rbx);
1526 __ pop(rdi);
1527 __ pop(rsi);
1528 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr);
1529 __ leave(); // required for proper stackwalking of RuntimeStub frame
1530 __ ret(0);
1532 return start;
1533 }
1535 //
1536 // Generate 'unsafe' array copy stub
1537 // Though just as safe as the other stubs, it takes an unscaled
1538 // size_t argument instead of an element count.
1539 //
1540 // Input:
1541 // 4(rsp) - source array address
1542 // 8(rsp) - destination array address
1543 // 12(rsp) - byte count, can be zero
1544 //
1545 // Output:
1546 // rax, == 0 - success
1547 // rax, == -1 - need to call System.arraycopy
1548 //
1549 // Examines the alignment of the operands and dispatches
1550 // to a long, int, short, or byte copy loop.
1551 //
1552 address generate_unsafe_copy(const char *name,
1553 address byte_copy_entry,
1554 address short_copy_entry,
1555 address int_copy_entry,
1556 address long_copy_entry) {
1558 Label L_long_aligned, L_int_aligned, L_short_aligned;
1560 __ align(CodeEntryAlignment);
1561 StubCodeMark mark(this, "StubRoutines", name);
1562 address start = __ pc();
1564 const Register from = rax; // source array address
1565 const Register to = rdx; // destination array address
1566 const Register count = rcx; // elements count
1568 __ enter(); // required for proper stackwalking of RuntimeStub frame
1569 __ push(rsi);
1570 __ push(rdi);
1571 Address from_arg(rsp, 12+ 4); // from
1572 Address to_arg(rsp, 12+ 8); // to
1573 Address count_arg(rsp, 12+12); // byte count
1575 // Load up:
1576 __ movptr(from , from_arg);
1577 __ movptr(to , to_arg);
1578 __ movl2ptr(count, count_arg);
1580 // bump this on entry, not on exit:
1581 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr);
1583 const Register bits = rsi;
1584 __ mov(bits, from);
1585 __ orptr(bits, to);
1586 __ orptr(bits, count);
1588 __ testl(bits, BytesPerLong-1);
1589 __ jccb(Assembler::zero, L_long_aligned);
1591 __ testl(bits, BytesPerInt-1);
1592 __ jccb(Assembler::zero, L_int_aligned);
1594 __ testl(bits, BytesPerShort-1);
1595 __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry));
1597 __ BIND(L_short_aligned);
1598 __ shrptr(count, LogBytesPerShort); // size => short_count
1599 __ movl(count_arg, count); // update 'count'
1600 __ jump(RuntimeAddress(short_copy_entry));
1602 __ BIND(L_int_aligned);
1603 __ shrptr(count, LogBytesPerInt); // size => int_count
1604 __ movl(count_arg, count); // update 'count'
1605 __ jump(RuntimeAddress(int_copy_entry));
1607 __ BIND(L_long_aligned);
1608 __ shrptr(count, LogBytesPerLong); // size => qword_count
1609 __ movl(count_arg, count); // update 'count'
1610 __ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it.
1611 __ pop(rsi);
1612 __ jump(RuntimeAddress(long_copy_entry));
1614 return start;
1615 }
1618 // Perform range checks on the proposed arraycopy.
1619 // Smashes src_pos and dst_pos. (Uses them up for temps.)
1620 void arraycopy_range_checks(Register src,
1621 Register src_pos,
1622 Register dst,
1623 Register dst_pos,
1624 Address& length,
1625 Label& L_failed) {
1626 BLOCK_COMMENT("arraycopy_range_checks:");
1627 const Register src_end = src_pos; // source array end position
1628 const Register dst_end = dst_pos; // destination array end position
1629 __ addl(src_end, length); // src_pos + length
1630 __ addl(dst_end, length); // dst_pos + length
1632 // if (src_pos + length > arrayOop(src)->length() ) FAIL;
1633 __ cmpl(src_end, Address(src, arrayOopDesc::length_offset_in_bytes()));
1634 __ jcc(Assembler::above, L_failed);
1636 // if (dst_pos + length > arrayOop(dst)->length() ) FAIL;
1637 __ cmpl(dst_end, Address(dst, arrayOopDesc::length_offset_in_bytes()));
1638 __ jcc(Assembler::above, L_failed);
1640 BLOCK_COMMENT("arraycopy_range_checks done");
1641 }
1644 //
1645 // Generate generic array copy stubs
1646 //
1647 // Input:
1648 // 4(rsp) - src oop
1649 // 8(rsp) - src_pos
1650 // 12(rsp) - dst oop
1651 // 16(rsp) - dst_pos
1652 // 20(rsp) - element count
1653 //
1654 // Output:
1655 // rax, == 0 - success
1656 // rax, == -1^K - failure, where K is partial transfer count
1657 //
1658 address generate_generic_copy(const char *name,
1659 address entry_jbyte_arraycopy,
1660 address entry_jshort_arraycopy,
1661 address entry_jint_arraycopy,
1662 address entry_oop_arraycopy,
1663 address entry_jlong_arraycopy,
1664 address entry_checkcast_arraycopy) {
1665 Label L_failed, L_failed_0, L_objArray;
1667 { int modulus = CodeEntryAlignment;
1668 int target = modulus - 5; // 5 = sizeof jmp(L_failed)
1669 int advance = target - (__ offset() % modulus);
1670 if (advance < 0) advance += modulus;
1671 if (advance > 0) __ nop(advance);
1672 }
1673 StubCodeMark mark(this, "StubRoutines", name);
1675 // Short-hop target to L_failed. Makes for denser prologue code.
1676 __ BIND(L_failed_0);
1677 __ jmp(L_failed);
1678 assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed");
1680 __ align(CodeEntryAlignment);
1681 address start = __ pc();
1683 __ enter(); // required for proper stackwalking of RuntimeStub frame
1684 __ push(rsi);
1685 __ push(rdi);
1687 // bump this on entry, not on exit:
1688 inc_counter_np(SharedRuntime::_generic_array_copy_ctr);
1690 // Input values
1691 Address SRC (rsp, 12+ 4);
1692 Address SRC_POS (rsp, 12+ 8);
1693 Address DST (rsp, 12+12);
1694 Address DST_POS (rsp, 12+16);
1695 Address LENGTH (rsp, 12+20);
1697 //-----------------------------------------------------------------------
1698 // Assembler stub will be used for this call to arraycopy
1699 // if the following conditions are met:
1700 //
1701 // (1) src and dst must not be null.
1702 // (2) src_pos must not be negative.
1703 // (3) dst_pos must not be negative.
1704 // (4) length must not be negative.
1705 // (5) src klass and dst klass should be the same and not NULL.
1706 // (6) src and dst should be arrays.
1707 // (7) src_pos + length must not exceed length of src.
1708 // (8) dst_pos + length must not exceed length of dst.
1709 //
1711 const Register src = rax; // source array oop
1712 const Register src_pos = rsi;
1713 const Register dst = rdx; // destination array oop
1714 const Register dst_pos = rdi;
1715 const Register length = rcx; // transfer count
1717 // if (src == NULL) return -1;
1718 __ movptr(src, SRC); // src oop
1719 __ testptr(src, src);
1720 __ jccb(Assembler::zero, L_failed_0);
1722 // if (src_pos < 0) return -1;
1723 __ movl2ptr(src_pos, SRC_POS); // src_pos
1724 __ testl(src_pos, src_pos);
1725 __ jccb(Assembler::negative, L_failed_0);
1727 // if (dst == NULL) return -1;
1728 __ movptr(dst, DST); // dst oop
1729 __ testptr(dst, dst);
1730 __ jccb(Assembler::zero, L_failed_0);
1732 // if (dst_pos < 0) return -1;
1733 __ movl2ptr(dst_pos, DST_POS); // dst_pos
1734 __ testl(dst_pos, dst_pos);
1735 __ jccb(Assembler::negative, L_failed_0);
1737 // if (length < 0) return -1;
1738 __ movl2ptr(length, LENGTH); // length
1739 __ testl(length, length);
1740 __ jccb(Assembler::negative, L_failed_0);
1742 // if (src->klass() == NULL) return -1;
1743 Address src_klass_addr(src, oopDesc::klass_offset_in_bytes());
1744 Address dst_klass_addr(dst, oopDesc::klass_offset_in_bytes());
1745 const Register rcx_src_klass = rcx; // array klass
1746 __ movptr(rcx_src_klass, Address(src, oopDesc::klass_offset_in_bytes()));
1748 #ifdef ASSERT
1749 // assert(src->klass() != NULL);
1750 BLOCK_COMMENT("assert klasses not null");
1751 { Label L1, L2;
1752 __ testptr(rcx_src_klass, rcx_src_klass);
1753 __ jccb(Assembler::notZero, L2); // it is broken if klass is NULL
1754 __ bind(L1);
1755 __ stop("broken null klass");
1756 __ bind(L2);
1757 __ cmpptr(dst_klass_addr, (int32_t)NULL_WORD);
1758 __ jccb(Assembler::equal, L1); // this would be broken also
1759 BLOCK_COMMENT("assert done");
1760 }
1761 #endif //ASSERT
1763 // Load layout helper (32-bits)
1764 //
1765 // |array_tag| | header_size | element_type | |log2_element_size|
1766 // 32 30 24 16 8 2 0
1767 //
1768 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0
1769 //
1771 int lh_offset = in_bytes(Klass::layout_helper_offset());
1772 Address src_klass_lh_addr(rcx_src_klass, lh_offset);
1774 // Handle objArrays completely differently...
1775 jint objArray_lh = Klass::array_layout_helper(T_OBJECT);
1776 __ cmpl(src_klass_lh_addr, objArray_lh);
1777 __ jcc(Assembler::equal, L_objArray);
1779 // if (src->klass() != dst->klass()) return -1;
1780 __ cmpptr(rcx_src_klass, dst_klass_addr);
1781 __ jccb(Assembler::notEqual, L_failed_0);
1783 const Register rcx_lh = rcx; // layout helper
1784 assert(rcx_lh == rcx_src_klass, "known alias");
1785 __ movl(rcx_lh, src_klass_lh_addr);
1787 // if (!src->is_Array()) return -1;
1788 __ cmpl(rcx_lh, Klass::_lh_neutral_value);
1789 __ jcc(Assembler::greaterEqual, L_failed_0); // signed cmp
1791 // At this point, it is known to be a typeArray (array_tag 0x3).
1792 #ifdef ASSERT
1793 { Label L;
1794 __ cmpl(rcx_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift));
1795 __ jcc(Assembler::greaterEqual, L); // signed cmp
1796 __ stop("must be a primitive array");
1797 __ bind(L);
1798 }
1799 #endif
1801 assert_different_registers(src, src_pos, dst, dst_pos, rcx_lh);
1802 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
1804 // TypeArrayKlass
1805 //
1806 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize);
1807 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize);
1808 //
1809 const Register rsi_offset = rsi; // array offset
1810 const Register src_array = src; // src array offset
1811 const Register dst_array = dst; // dst array offset
1812 const Register rdi_elsize = rdi; // log2 element size
1814 __ mov(rsi_offset, rcx_lh);
1815 __ shrptr(rsi_offset, Klass::_lh_header_size_shift);
1816 __ andptr(rsi_offset, Klass::_lh_header_size_mask); // array_offset
1817 __ addptr(src_array, rsi_offset); // src array offset
1818 __ addptr(dst_array, rsi_offset); // dst array offset
1819 __ andptr(rcx_lh, Klass::_lh_log2_element_size_mask); // log2 elsize
1821 // next registers should be set before the jump to corresponding stub
1822 const Register from = src; // source array address
1823 const Register to = dst; // destination array address
1824 const Register count = rcx; // elements count
1825 // some of them should be duplicated on stack
1826 #define FROM Address(rsp, 12+ 4)
1827 #define TO Address(rsp, 12+ 8) // Not used now
1828 #define COUNT Address(rsp, 12+12) // Only for oop arraycopy
1830 BLOCK_COMMENT("scale indexes to element size");
1831 __ movl2ptr(rsi, SRC_POS); // src_pos
1832 __ shlptr(rsi); // src_pos << rcx (log2 elsize)
1833 assert(src_array == from, "");
1834 __ addptr(from, rsi); // from = src_array + SRC_POS << log2 elsize
1835 __ movl2ptr(rdi, DST_POS); // dst_pos
1836 __ shlptr(rdi); // dst_pos << rcx (log2 elsize)
1837 assert(dst_array == to, "");
1838 __ addptr(to, rdi); // to = dst_array + DST_POS << log2 elsize
1839 __ movptr(FROM, from); // src_addr
1840 __ mov(rdi_elsize, rcx_lh); // log2 elsize
1841 __ movl2ptr(count, LENGTH); // elements count
1843 BLOCK_COMMENT("choose copy loop based on element size");
1844 __ cmpl(rdi_elsize, 0);
1846 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jbyte_arraycopy));
1847 __ cmpl(rdi_elsize, LogBytesPerShort);
1848 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jshort_arraycopy));
1849 __ cmpl(rdi_elsize, LogBytesPerInt);
1850 __ jump_cc(Assembler::equal, RuntimeAddress(entry_jint_arraycopy));
1851 #ifdef ASSERT
1852 __ cmpl(rdi_elsize, LogBytesPerLong);
1853 __ jccb(Assembler::notEqual, L_failed);
1854 #endif
1855 __ pop(rdi); // Do pops here since jlong_arraycopy stub does not do it.
1856 __ pop(rsi);
1857 __ jump(RuntimeAddress(entry_jlong_arraycopy));
1859 __ BIND(L_failed);
1860 __ xorptr(rax, rax);
1861 __ notptr(rax); // return -1
1862 __ pop(rdi);
1863 __ pop(rsi);
1864 __ leave(); // required for proper stackwalking of RuntimeStub frame
1865 __ ret(0);
1867 // ObjArrayKlass
1868 __ BIND(L_objArray);
1869 // live at this point: rcx_src_klass, src[_pos], dst[_pos]
1871 Label L_plain_copy, L_checkcast_copy;
1872 // test array classes for subtyping
1873 __ cmpptr(rcx_src_klass, dst_klass_addr); // usual case is exact equality
1874 __ jccb(Assembler::notEqual, L_checkcast_copy);
1876 // Identically typed arrays can be copied without element-wise checks.
1877 assert_different_registers(src, src_pos, dst, dst_pos, rcx_src_klass);
1878 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
1880 __ BIND(L_plain_copy);
1881 __ movl2ptr(count, LENGTH); // elements count
1882 __ movl2ptr(src_pos, SRC_POS); // reload src_pos
1883 __ lea(from, Address(src, src_pos, Address::times_ptr,
1884 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr
1885 __ movl2ptr(dst_pos, DST_POS); // reload dst_pos
1886 __ lea(to, Address(dst, dst_pos, Address::times_ptr,
1887 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr
1888 __ movptr(FROM, from); // src_addr
1889 __ movptr(TO, to); // dst_addr
1890 __ movl(COUNT, count); // count
1891 __ jump(RuntimeAddress(entry_oop_arraycopy));
1893 __ BIND(L_checkcast_copy);
1894 // live at this point: rcx_src_klass, dst[_pos], src[_pos]
1895 {
1896 // Handy offsets:
1897 int ek_offset = in_bytes(ObjArrayKlass::element_klass_offset());
1898 int sco_offset = in_bytes(Klass::super_check_offset_offset());
1900 Register rsi_dst_klass = rsi;
1901 Register rdi_temp = rdi;
1902 assert(rsi_dst_klass == src_pos, "expected alias w/ src_pos");
1903 assert(rdi_temp == dst_pos, "expected alias w/ dst_pos");
1904 Address dst_klass_lh_addr(rsi_dst_klass, lh_offset);
1906 // Before looking at dst.length, make sure dst is also an objArray.
1907 __ movptr(rsi_dst_klass, dst_klass_addr);
1908 __ cmpl(dst_klass_lh_addr, objArray_lh);
1909 __ jccb(Assembler::notEqual, L_failed);
1911 // It is safe to examine both src.length and dst.length.
1912 __ movl2ptr(src_pos, SRC_POS); // reload rsi
1913 arraycopy_range_checks(src, src_pos, dst, dst_pos, LENGTH, L_failed);
1914 // (Now src_pos and dst_pos are killed, but not src and dst.)
1916 // We'll need this temp (don't forget to pop it after the type check).
1917 __ push(rbx);
1918 Register rbx_src_klass = rbx;
1920 __ mov(rbx_src_klass, rcx_src_klass); // spill away from rcx
1921 __ movptr(rsi_dst_klass, dst_klass_addr);
1922 Address super_check_offset_addr(rsi_dst_klass, sco_offset);
1923 Label L_fail_array_check;
1924 generate_type_check(rbx_src_klass,
1925 super_check_offset_addr, dst_klass_addr,
1926 rdi_temp, NULL, &L_fail_array_check);
1927 // (On fall-through, we have passed the array type check.)
1928 __ pop(rbx);
1929 __ jmp(L_plain_copy);
1931 __ BIND(L_fail_array_check);
1932 // Reshuffle arguments so we can call checkcast_arraycopy:
1934 // match initial saves for checkcast_arraycopy
1935 // push(rsi); // already done; see above
1936 // push(rdi); // already done; see above
1937 // push(rbx); // already done; see above
1939 // Marshal outgoing arguments now, freeing registers.
1940 Address from_arg(rsp, 16+ 4); // from
1941 Address to_arg(rsp, 16+ 8); // to
1942 Address length_arg(rsp, 16+12); // elements count
1943 Address ckoff_arg(rsp, 16+16); // super_check_offset
1944 Address ckval_arg(rsp, 16+20); // super_klass
1946 Address SRC_POS_arg(rsp, 16+ 8);
1947 Address DST_POS_arg(rsp, 16+16);
1948 Address LENGTH_arg(rsp, 16+20);
1949 // push rbx, changed the incoming offsets (why not just use rbp,??)
1950 // assert(SRC_POS_arg.disp() == SRC_POS.disp() + 4, "");
1952 __ movptr(rbx, Address(rsi_dst_klass, ek_offset));
1953 __ movl2ptr(length, LENGTH_arg); // reload elements count
1954 __ movl2ptr(src_pos, SRC_POS_arg); // reload src_pos
1955 __ movl2ptr(dst_pos, DST_POS_arg); // reload dst_pos
1957 __ movptr(ckval_arg, rbx); // destination element type
1958 __ movl(rbx, Address(rbx, sco_offset));
1959 __ movl(ckoff_arg, rbx); // corresponding class check offset
1961 __ movl(length_arg, length); // outgoing length argument
1963 __ lea(from, Address(src, src_pos, Address::times_ptr,
1964 arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
1965 __ movptr(from_arg, from);
1967 __ lea(to, Address(dst, dst_pos, Address::times_ptr,
1968 arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
1969 __ movptr(to_arg, to);
1970 __ jump(RuntimeAddress(entry_checkcast_arraycopy));
1971 }
1973 return start;
1974 }
1976 void generate_arraycopy_stubs() {
1977 address entry;
1978 address entry_jbyte_arraycopy;
1979 address entry_jshort_arraycopy;
1980 address entry_jint_arraycopy;
1981 address entry_oop_arraycopy;
1982 address entry_jlong_arraycopy;
1983 address entry_checkcast_arraycopy;
1985 StubRoutines::_arrayof_jbyte_disjoint_arraycopy =
1986 generate_disjoint_copy(T_BYTE, true, Address::times_1, &entry,
1987 "arrayof_jbyte_disjoint_arraycopy");
1988 StubRoutines::_arrayof_jbyte_arraycopy =
1989 generate_conjoint_copy(T_BYTE, true, Address::times_1, entry,
1990 NULL, "arrayof_jbyte_arraycopy");
1991 StubRoutines::_jbyte_disjoint_arraycopy =
1992 generate_disjoint_copy(T_BYTE, false, Address::times_1, &entry,
1993 "jbyte_disjoint_arraycopy");
1994 StubRoutines::_jbyte_arraycopy =
1995 generate_conjoint_copy(T_BYTE, false, Address::times_1, entry,
1996 &entry_jbyte_arraycopy, "jbyte_arraycopy");
1998 StubRoutines::_arrayof_jshort_disjoint_arraycopy =
1999 generate_disjoint_copy(T_SHORT, true, Address::times_2, &entry,
2000 "arrayof_jshort_disjoint_arraycopy");
2001 StubRoutines::_arrayof_jshort_arraycopy =
2002 generate_conjoint_copy(T_SHORT, true, Address::times_2, entry,
2003 NULL, "arrayof_jshort_arraycopy");
2004 StubRoutines::_jshort_disjoint_arraycopy =
2005 generate_disjoint_copy(T_SHORT, false, Address::times_2, &entry,
2006 "jshort_disjoint_arraycopy");
2007 StubRoutines::_jshort_arraycopy =
2008 generate_conjoint_copy(T_SHORT, false, Address::times_2, entry,
2009 &entry_jshort_arraycopy, "jshort_arraycopy");
2011 // Next arrays are always aligned on 4 bytes at least.
2012 StubRoutines::_jint_disjoint_arraycopy =
2013 generate_disjoint_copy(T_INT, true, Address::times_4, &entry,
2014 "jint_disjoint_arraycopy");
2015 StubRoutines::_jint_arraycopy =
2016 generate_conjoint_copy(T_INT, true, Address::times_4, entry,
2017 &entry_jint_arraycopy, "jint_arraycopy");
2019 StubRoutines::_oop_disjoint_arraycopy =
2020 generate_disjoint_copy(T_OBJECT, true, Address::times_ptr, &entry,
2021 "oop_disjoint_arraycopy");
2022 StubRoutines::_oop_arraycopy =
2023 generate_conjoint_copy(T_OBJECT, true, Address::times_ptr, entry,
2024 &entry_oop_arraycopy, "oop_arraycopy");
2026 StubRoutines::_oop_disjoint_arraycopy_uninit =
2027 generate_disjoint_copy(T_OBJECT, true, Address::times_ptr, &entry,
2028 "oop_disjoint_arraycopy_uninit",
2029 /*dest_uninitialized*/true);
2030 StubRoutines::_oop_arraycopy_uninit =
2031 generate_conjoint_copy(T_OBJECT, true, Address::times_ptr, entry,
2032 NULL, "oop_arraycopy_uninit",
2033 /*dest_uninitialized*/true);
2035 StubRoutines::_jlong_disjoint_arraycopy =
2036 generate_disjoint_long_copy(&entry, "jlong_disjoint_arraycopy");
2037 StubRoutines::_jlong_arraycopy =
2038 generate_conjoint_long_copy(entry, &entry_jlong_arraycopy,
2039 "jlong_arraycopy");
2041 StubRoutines::_jbyte_fill = generate_fill(T_BYTE, false, "jbyte_fill");
2042 StubRoutines::_jshort_fill = generate_fill(T_SHORT, false, "jshort_fill");
2043 StubRoutines::_jint_fill = generate_fill(T_INT, false, "jint_fill");
2044 StubRoutines::_arrayof_jbyte_fill = generate_fill(T_BYTE, true, "arrayof_jbyte_fill");
2045 StubRoutines::_arrayof_jshort_fill = generate_fill(T_SHORT, true, "arrayof_jshort_fill");
2046 StubRoutines::_arrayof_jint_fill = generate_fill(T_INT, true, "arrayof_jint_fill");
2048 StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy;
2049 StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy;
2050 StubRoutines::_arrayof_oop_disjoint_arraycopy_uninit = StubRoutines::_oop_disjoint_arraycopy_uninit;
2051 StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy;
2053 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy;
2054 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy;
2055 StubRoutines::_arrayof_oop_arraycopy_uninit = StubRoutines::_oop_arraycopy_uninit;
2056 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy;
2058 StubRoutines::_checkcast_arraycopy =
2059 generate_checkcast_copy("checkcast_arraycopy", &entry_checkcast_arraycopy);
2060 StubRoutines::_checkcast_arraycopy_uninit =
2061 generate_checkcast_copy("checkcast_arraycopy_uninit", NULL, /*dest_uninitialized*/true);
2063 StubRoutines::_unsafe_arraycopy =
2064 generate_unsafe_copy("unsafe_arraycopy",
2065 entry_jbyte_arraycopy,
2066 entry_jshort_arraycopy,
2067 entry_jint_arraycopy,
2068 entry_jlong_arraycopy);
2070 StubRoutines::_generic_arraycopy =
2071 generate_generic_copy("generic_arraycopy",
2072 entry_jbyte_arraycopy,
2073 entry_jshort_arraycopy,
2074 entry_jint_arraycopy,
2075 entry_oop_arraycopy,
2076 entry_jlong_arraycopy,
2077 entry_checkcast_arraycopy);
2078 }
2080 void generate_math_stubs() {
2081 {
2082 StubCodeMark mark(this, "StubRoutines", "log");
2083 StubRoutines::_intrinsic_log = (double (*)(double)) __ pc();
2085 __ fld_d(Address(rsp, 4));
2086 __ flog();
2087 __ ret(0);
2088 }
2089 {
2090 StubCodeMark mark(this, "StubRoutines", "log10");
2091 StubRoutines::_intrinsic_log10 = (double (*)(double)) __ pc();
2093 __ fld_d(Address(rsp, 4));
2094 __ flog10();
2095 __ ret(0);
2096 }
2097 {
2098 StubCodeMark mark(this, "StubRoutines", "sin");
2099 StubRoutines::_intrinsic_sin = (double (*)(double)) __ pc();
2101 __ fld_d(Address(rsp, 4));
2102 __ trigfunc('s');
2103 __ ret(0);
2104 }
2105 {
2106 StubCodeMark mark(this, "StubRoutines", "cos");
2107 StubRoutines::_intrinsic_cos = (double (*)(double)) __ pc();
2109 __ fld_d(Address(rsp, 4));
2110 __ trigfunc('c');
2111 __ ret(0);
2112 }
2113 {
2114 StubCodeMark mark(this, "StubRoutines", "tan");
2115 StubRoutines::_intrinsic_tan = (double (*)(double)) __ pc();
2117 __ fld_d(Address(rsp, 4));
2118 __ trigfunc('t');
2119 __ ret(0);
2120 }
2121 {
2122 StubCodeMark mark(this, "StubRoutines", "exp");
2123 StubRoutines::_intrinsic_exp = (double (*)(double)) __ pc();
2125 __ fld_d(Address(rsp, 4));
2126 __ exp_with_fallback(0);
2127 __ ret(0);
2128 }
2129 {
2130 StubCodeMark mark(this, "StubRoutines", "pow");
2131 StubRoutines::_intrinsic_pow = (double (*)(double,double)) __ pc();
2133 __ fld_d(Address(rsp, 12));
2134 __ fld_d(Address(rsp, 4));
2135 __ pow_with_fallback(0);
2136 __ ret(0);
2137 }
2138 }
2140 // AES intrinsic stubs
2141 enum {AESBlockSize = 16};
2143 address generate_key_shuffle_mask() {
2144 __ align(16);
2145 StubCodeMark mark(this, "StubRoutines", "key_shuffle_mask");
2146 address start = __ pc();
2147 __ emit_data(0x00010203, relocInfo::none, 0 );
2148 __ emit_data(0x04050607, relocInfo::none, 0 );
2149 __ emit_data(0x08090a0b, relocInfo::none, 0 );
2150 __ emit_data(0x0c0d0e0f, relocInfo::none, 0 );
2151 return start;
2152 }
2154 // Utility routine for loading a 128-bit key word in little endian format
2155 // can optionally specify that the shuffle mask is already in an xmmregister
2156 void load_key(XMMRegister xmmdst, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) {
2157 __ movdqu(xmmdst, Address(key, offset));
2158 if (xmm_shuf_mask != NULL) {
2159 __ pshufb(xmmdst, xmm_shuf_mask);
2160 } else {
2161 __ pshufb(xmmdst, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
2162 }
2163 }
2165 // aesenc using specified key+offset
2166 // can optionally specify that the shuffle mask is already in an xmmregister
2167 void aes_enc_key(XMMRegister xmmdst, XMMRegister xmmtmp, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) {
2168 load_key(xmmtmp, key, offset, xmm_shuf_mask);
2169 __ aesenc(xmmdst, xmmtmp);
2170 }
2172 // aesdec using specified key+offset
2173 // can optionally specify that the shuffle mask is already in an xmmregister
2174 void aes_dec_key(XMMRegister xmmdst, XMMRegister xmmtmp, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) {
2175 load_key(xmmtmp, key, offset, xmm_shuf_mask);
2176 __ aesdec(xmmdst, xmmtmp);
2177 }
2180 // Arguments:
2181 //
2182 // Inputs:
2183 // c_rarg0 - source byte array address
2184 // c_rarg1 - destination byte array address
2185 // c_rarg2 - K (key) in little endian int array
2186 //
2187 address generate_aescrypt_encryptBlock() {
2188 assert(UseAES, "need AES instructions and misaligned SSE support");
2189 __ align(CodeEntryAlignment);
2190 StubCodeMark mark(this, "StubRoutines", "aescrypt_encryptBlock");
2191 Label L_doLast;
2192 address start = __ pc();
2194 const Register from = rdx; // source array address
2195 const Register to = rdx; // destination array address
2196 const Register key = rcx; // key array address
2197 const Register keylen = rax;
2198 const Address from_param(rbp, 8+0);
2199 const Address to_param (rbp, 8+4);
2200 const Address key_param (rbp, 8+8);
2202 const XMMRegister xmm_result = xmm0;
2203 const XMMRegister xmm_key_shuf_mask = xmm1;
2204 const XMMRegister xmm_temp1 = xmm2;
2205 const XMMRegister xmm_temp2 = xmm3;
2206 const XMMRegister xmm_temp3 = xmm4;
2207 const XMMRegister xmm_temp4 = xmm5;
2209 __ enter(); // required for proper stackwalking of RuntimeStub frame
2210 __ movptr(from, from_param);
2211 __ movptr(key, key_param);
2213 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60}
2214 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
2216 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
2217 __ movdqu(xmm_result, Address(from, 0)); // get 16 bytes of input
2218 __ movptr(to, to_param);
2220 // For encryption, the java expanded key ordering is just what we need
2222 load_key(xmm_temp1, key, 0x00, xmm_key_shuf_mask);
2223 __ pxor(xmm_result, xmm_temp1);
2225 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask);
2226 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask);
2227 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask);
2228 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask);
2230 __ aesenc(xmm_result, xmm_temp1);
2231 __ aesenc(xmm_result, xmm_temp2);
2232 __ aesenc(xmm_result, xmm_temp3);
2233 __ aesenc(xmm_result, xmm_temp4);
2235 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask);
2236 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask);
2237 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask);
2238 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask);
2240 __ aesenc(xmm_result, xmm_temp1);
2241 __ aesenc(xmm_result, xmm_temp2);
2242 __ aesenc(xmm_result, xmm_temp3);
2243 __ aesenc(xmm_result, xmm_temp4);
2245 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask);
2246 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask);
2248 __ cmpl(keylen, 44);
2249 __ jccb(Assembler::equal, L_doLast);
2251 __ aesenc(xmm_result, xmm_temp1);
2252 __ aesenc(xmm_result, xmm_temp2);
2254 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask);
2255 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask);
2257 __ cmpl(keylen, 52);
2258 __ jccb(Assembler::equal, L_doLast);
2260 __ aesenc(xmm_result, xmm_temp1);
2261 __ aesenc(xmm_result, xmm_temp2);
2263 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask);
2264 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask);
2266 __ BIND(L_doLast);
2267 __ aesenc(xmm_result, xmm_temp1);
2268 __ aesenclast(xmm_result, xmm_temp2);
2269 __ movdqu(Address(to, 0), xmm_result); // store the result
2270 __ xorptr(rax, rax); // return 0
2271 __ leave(); // required for proper stackwalking of RuntimeStub frame
2272 __ ret(0);
2274 return start;
2275 }
2278 // Arguments:
2279 //
2280 // Inputs:
2281 // c_rarg0 - source byte array address
2282 // c_rarg1 - destination byte array address
2283 // c_rarg2 - K (key) in little endian int array
2284 //
2285 address generate_aescrypt_decryptBlock() {
2286 assert(UseAES, "need AES instructions and misaligned SSE support");
2287 __ align(CodeEntryAlignment);
2288 StubCodeMark mark(this, "StubRoutines", "aescrypt_decryptBlock");
2289 Label L_doLast;
2290 address start = __ pc();
2292 const Register from = rdx; // source array address
2293 const Register to = rdx; // destination array address
2294 const Register key = rcx; // key array address
2295 const Register keylen = rax;
2296 const Address from_param(rbp, 8+0);
2297 const Address to_param (rbp, 8+4);
2298 const Address key_param (rbp, 8+8);
2300 const XMMRegister xmm_result = xmm0;
2301 const XMMRegister xmm_key_shuf_mask = xmm1;
2302 const XMMRegister xmm_temp1 = xmm2;
2303 const XMMRegister xmm_temp2 = xmm3;
2304 const XMMRegister xmm_temp3 = xmm4;
2305 const XMMRegister xmm_temp4 = xmm5;
2307 __ enter(); // required for proper stackwalking of RuntimeStub frame
2308 __ movptr(from, from_param);
2309 __ movptr(key, key_param);
2311 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60}
2312 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
2314 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
2315 __ movdqu(xmm_result, Address(from, 0));
2316 __ movptr(to, to_param);
2318 // for decryption java expanded key ordering is rotated one position from what we want
2319 // so we start from 0x10 here and hit 0x00 last
2320 // we don't know if the key is aligned, hence not using load-execute form
2321 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask);
2322 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask);
2323 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask);
2324 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask);
2326 __ pxor (xmm_result, xmm_temp1);
2327 __ aesdec(xmm_result, xmm_temp2);
2328 __ aesdec(xmm_result, xmm_temp3);
2329 __ aesdec(xmm_result, xmm_temp4);
2331 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask);
2332 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask);
2333 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask);
2334 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask);
2336 __ aesdec(xmm_result, xmm_temp1);
2337 __ aesdec(xmm_result, xmm_temp2);
2338 __ aesdec(xmm_result, xmm_temp3);
2339 __ aesdec(xmm_result, xmm_temp4);
2341 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask);
2342 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask);
2343 load_key(xmm_temp3, key, 0x00, xmm_key_shuf_mask);
2345 __ cmpl(keylen, 44);
2346 __ jccb(Assembler::equal, L_doLast);
2348 __ aesdec(xmm_result, xmm_temp1);
2349 __ aesdec(xmm_result, xmm_temp2);
2351 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask);
2352 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask);
2354 __ cmpl(keylen, 52);
2355 __ jccb(Assembler::equal, L_doLast);
2357 __ aesdec(xmm_result, xmm_temp1);
2358 __ aesdec(xmm_result, xmm_temp2);
2360 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask);
2361 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask);
2363 __ BIND(L_doLast);
2364 __ aesdec(xmm_result, xmm_temp1);
2365 __ aesdec(xmm_result, xmm_temp2);
2367 // for decryption the aesdeclast operation is always on key+0x00
2368 __ aesdeclast(xmm_result, xmm_temp3);
2369 __ movdqu(Address(to, 0), xmm_result); // store the result
2370 __ xorptr(rax, rax); // return 0
2371 __ leave(); // required for proper stackwalking of RuntimeStub frame
2372 __ ret(0);
2374 return start;
2375 }
2377 void handleSOERegisters(bool saving) {
2378 const int saveFrameSizeInBytes = 4 * wordSize;
2379 const Address saved_rbx (rbp, -3 * wordSize);
2380 const Address saved_rsi (rbp, -2 * wordSize);
2381 const Address saved_rdi (rbp, -1 * wordSize);
2383 if (saving) {
2384 __ subptr(rsp, saveFrameSizeInBytes);
2385 __ movptr(saved_rsi, rsi);
2386 __ movptr(saved_rdi, rdi);
2387 __ movptr(saved_rbx, rbx);
2388 } else {
2389 // restoring
2390 __ movptr(rsi, saved_rsi);
2391 __ movptr(rdi, saved_rdi);
2392 __ movptr(rbx, saved_rbx);
2393 }
2394 }
2396 // Arguments:
2397 //
2398 // Inputs:
2399 // c_rarg0 - source byte array address
2400 // c_rarg1 - destination byte array address
2401 // c_rarg2 - K (key) in little endian int array
2402 // c_rarg3 - r vector byte array address
2403 // c_rarg4 - input length
2404 //
2405 address generate_cipherBlockChaining_encryptAESCrypt() {
2406 assert(UseAES, "need AES instructions and misaligned SSE support");
2407 __ align(CodeEntryAlignment);
2408 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_encryptAESCrypt");
2409 address start = __ pc();
2411 Label L_exit, L_key_192_256, L_key_256, L_loopTop_128, L_loopTop_192, L_loopTop_256;
2412 const Register from = rsi; // source array address
2413 const Register to = rdx; // destination array address
2414 const Register key = rcx; // key array address
2415 const Register rvec = rdi; // r byte array initialized from initvector array address
2416 // and left with the results of the last encryption block
2417 const Register len_reg = rbx; // src len (must be multiple of blocksize 16)
2418 const Register pos = rax;
2420 // xmm register assignments for the loops below
2421 const XMMRegister xmm_result = xmm0;
2422 const XMMRegister xmm_temp = xmm1;
2423 // first 6 keys preloaded into xmm2-xmm7
2424 const int XMM_REG_NUM_KEY_FIRST = 2;
2425 const int XMM_REG_NUM_KEY_LAST = 7;
2426 const XMMRegister xmm_key0 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST);
2428 __ enter(); // required for proper stackwalking of RuntimeStub frame
2429 handleSOERegisters(true /*saving*/);
2431 // load registers from incoming parameters
2432 const Address from_param(rbp, 8+0);
2433 const Address to_param (rbp, 8+4);
2434 const Address key_param (rbp, 8+8);
2435 const Address rvec_param (rbp, 8+12);
2436 const Address len_param (rbp, 8+16);
2437 __ movptr(from , from_param);
2438 __ movptr(to , to_param);
2439 __ movptr(key , key_param);
2440 __ movptr(rvec , rvec_param);
2441 __ movptr(len_reg , len_param);
2443 const XMMRegister xmm_key_shuf_mask = xmm_temp; // used temporarily to swap key bytes up front
2444 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
2445 // load up xmm regs 2 thru 7 with keys 0-5
2446 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x00; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2447 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask);
2448 offset += 0x10;
2449 }
2451 __ movdqu(xmm_result, Address(rvec, 0x00)); // initialize xmm_result with r vec
2453 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256))
2454 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
2455 __ cmpl(rax, 44);
2456 __ jcc(Assembler::notEqual, L_key_192_256);
2458 // 128 bit code follows here
2459 __ movl(pos, 0);
2460 __ align(OptoLoopAlignment);
2461 __ BIND(L_loopTop_128);
2462 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
2463 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2465 __ pxor (xmm_result, xmm_key0); // do the aes rounds
2466 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2467 __ aesenc(xmm_result, as_XMMRegister(rnum));
2468 }
2469 for (int key_offset = 0x60; key_offset <= 0x90; key_offset += 0x10) {
2470 aes_enc_key(xmm_result, xmm_temp, key, key_offset);
2471 }
2472 load_key(xmm_temp, key, 0xa0);
2473 __ aesenclast(xmm_result, xmm_temp);
2475 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2476 // no need to store r to memory until we exit
2477 __ addptr(pos, AESBlockSize);
2478 __ subptr(len_reg, AESBlockSize);
2479 __ jcc(Assembler::notEqual, L_loopTop_128);
2481 __ BIND(L_exit);
2482 __ movdqu(Address(rvec, 0), xmm_result); // final value of r stored in rvec of CipherBlockChaining object
2484 handleSOERegisters(false /*restoring*/);
2485 __ movl(rax, 0); // return 0 (why?)
2486 __ leave(); // required for proper stackwalking of RuntimeStub frame
2487 __ ret(0);
2489 __ BIND(L_key_192_256);
2490 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256)
2491 __ cmpl(rax, 52);
2492 __ jcc(Assembler::notEqual, L_key_256);
2494 // 192-bit code follows here (could be changed to use more xmm registers)
2495 __ movl(pos, 0);
2496 __ align(OptoLoopAlignment);
2497 __ BIND(L_loopTop_192);
2498 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
2499 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2501 __ pxor (xmm_result, xmm_key0); // do the aes rounds
2502 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2503 __ aesenc(xmm_result, as_XMMRegister(rnum));
2504 }
2505 for (int key_offset = 0x60; key_offset <= 0xb0; key_offset += 0x10) {
2506 aes_enc_key(xmm_result, xmm_temp, key, key_offset);
2507 }
2508 load_key(xmm_temp, key, 0xc0);
2509 __ aesenclast(xmm_result, xmm_temp);
2511 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2512 // no need to store r to memory until we exit
2513 __ addptr(pos, AESBlockSize);
2514 __ subptr(len_reg, AESBlockSize);
2515 __ jcc(Assembler::notEqual, L_loopTop_192);
2516 __ jmp(L_exit);
2518 __ BIND(L_key_256);
2519 // 256-bit code follows here (could be changed to use more xmm registers)
2520 __ movl(pos, 0);
2521 __ align(OptoLoopAlignment);
2522 __ BIND(L_loopTop_256);
2523 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
2524 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2526 __ pxor (xmm_result, xmm_key0); // do the aes rounds
2527 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2528 __ aesenc(xmm_result, as_XMMRegister(rnum));
2529 }
2530 for (int key_offset = 0x60; key_offset <= 0xd0; key_offset += 0x10) {
2531 aes_enc_key(xmm_result, xmm_temp, key, key_offset);
2532 }
2533 load_key(xmm_temp, key, 0xe0);
2534 __ aesenclast(xmm_result, xmm_temp);
2536 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2537 // no need to store r to memory until we exit
2538 __ addptr(pos, AESBlockSize);
2539 __ subptr(len_reg, AESBlockSize);
2540 __ jcc(Assembler::notEqual, L_loopTop_256);
2541 __ jmp(L_exit);
2543 return start;
2544 }
2547 // CBC AES Decryption.
2548 // In 32-bit stub, because of lack of registers we do not try to parallelize 4 blocks at a time.
2549 //
2550 // Arguments:
2551 //
2552 // Inputs:
2553 // c_rarg0 - source byte array address
2554 // c_rarg1 - destination byte array address
2555 // c_rarg2 - K (key) in little endian int array
2556 // c_rarg3 - r vector byte array address
2557 // c_rarg4 - input length
2558 //
2560 address generate_cipherBlockChaining_decryptAESCrypt() {
2561 assert(UseAES, "need AES instructions and misaligned SSE support");
2562 __ align(CodeEntryAlignment);
2563 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_decryptAESCrypt");
2564 address start = __ pc();
2566 Label L_exit, L_key_192_256, L_key_256;
2567 Label L_singleBlock_loopTop_128;
2568 Label L_singleBlock_loopTop_192, L_singleBlock_loopTop_256;
2569 const Register from = rsi; // source array address
2570 const Register to = rdx; // destination array address
2571 const Register key = rcx; // key array address
2572 const Register rvec = rdi; // r byte array initialized from initvector array address
2573 // and left with the results of the last encryption block
2574 const Register len_reg = rbx; // src len (must be multiple of blocksize 16)
2575 const Register pos = rax;
2577 // xmm register assignments for the loops below
2578 const XMMRegister xmm_result = xmm0;
2579 const XMMRegister xmm_temp = xmm1;
2580 // first 6 keys preloaded into xmm2-xmm7
2581 const int XMM_REG_NUM_KEY_FIRST = 2;
2582 const int XMM_REG_NUM_KEY_LAST = 7;
2583 const int FIRST_NON_REG_KEY_offset = 0x70;
2584 const XMMRegister xmm_key_first = as_XMMRegister(XMM_REG_NUM_KEY_FIRST);
2586 __ enter(); // required for proper stackwalking of RuntimeStub frame
2587 handleSOERegisters(true /*saving*/);
2589 // load registers from incoming parameters
2590 const Address from_param(rbp, 8+0);
2591 const Address to_param (rbp, 8+4);
2592 const Address key_param (rbp, 8+8);
2593 const Address rvec_param (rbp, 8+12);
2594 const Address len_param (rbp, 8+16);
2595 __ movptr(from , from_param);
2596 __ movptr(to , to_param);
2597 __ movptr(key , key_param);
2598 __ movptr(rvec , rvec_param);
2599 __ movptr(len_reg , len_param);
2601 // the java expanded key ordering is rotated one position from what we want
2602 // so we start from 0x10 here and hit 0x00 last
2603 const XMMRegister xmm_key_shuf_mask = xmm1; // used temporarily to swap key bytes up front
2604 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
2605 // load up xmm regs 2 thru 6 with first 5 keys
2606 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x10; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2607 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask);
2608 offset += 0x10;
2609 }
2611 // inside here, use the rvec register to point to previous block cipher
2612 // with which we xor at the end of each newly decrypted block
2613 const Register prev_block_cipher_ptr = rvec;
2615 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256))
2616 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
2617 __ cmpl(rax, 44);
2618 __ jcc(Assembler::notEqual, L_key_192_256);
2621 // 128-bit code follows here, parallelized
2622 __ movl(pos, 0);
2623 __ align(OptoLoopAlignment);
2624 __ BIND(L_singleBlock_loopTop_128);
2625 __ cmpptr(len_reg, 0); // any blocks left??
2626 __ jcc(Assembler::equal, L_exit);
2627 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
2628 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
2629 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2630 __ aesdec(xmm_result, as_XMMRegister(rnum));
2631 }
2632 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xa0; key_offset += 0x10) { // 128-bit runs up to key offset a0
2633 aes_dec_key(xmm_result, xmm_temp, key, key_offset);
2634 }
2635 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0
2636 __ aesdeclast(xmm_result, xmm_temp);
2637 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00));
2638 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2639 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2640 // no need to store r to memory until we exit
2641 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr
2642 __ addptr(pos, AESBlockSize);
2643 __ subptr(len_reg, AESBlockSize);
2644 __ jmp(L_singleBlock_loopTop_128);
2647 __ BIND(L_exit);
2648 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00));
2649 __ movptr(rvec , rvec_param); // restore this since used in loop
2650 __ movdqu(Address(rvec, 0), xmm_temp); // final value of r stored in rvec of CipherBlockChaining object
2651 handleSOERegisters(false /*restoring*/);
2652 __ movl(rax, 0); // return 0 (why?)
2653 __ leave(); // required for proper stackwalking of RuntimeStub frame
2654 __ ret(0);
2657 __ BIND(L_key_192_256);
2658 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256)
2659 __ cmpl(rax, 52);
2660 __ jcc(Assembler::notEqual, L_key_256);
2662 // 192-bit code follows here (could be optimized to use parallelism)
2663 __ movl(pos, 0);
2664 __ align(OptoLoopAlignment);
2665 __ BIND(L_singleBlock_loopTop_192);
2666 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
2667 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
2668 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2669 __ aesdec(xmm_result, as_XMMRegister(rnum));
2670 }
2671 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xc0; key_offset += 0x10) { // 192-bit runs up to key offset c0
2672 aes_dec_key(xmm_result, xmm_temp, key, key_offset);
2673 }
2674 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0
2675 __ aesdeclast(xmm_result, xmm_temp);
2676 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00));
2677 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2678 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2679 // no need to store r to memory until we exit
2680 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr
2681 __ addptr(pos, AESBlockSize);
2682 __ subptr(len_reg, AESBlockSize);
2683 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_192);
2684 __ jmp(L_exit);
2686 __ BIND(L_key_256);
2687 // 256-bit code follows here (could be optimized to use parallelism)
2688 __ movl(pos, 0);
2689 __ align(OptoLoopAlignment);
2690 __ BIND(L_singleBlock_loopTop_256);
2691 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
2692 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
2693 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST; rnum++) {
2694 __ aesdec(xmm_result, as_XMMRegister(rnum));
2695 }
2696 for (int key_offset = FIRST_NON_REG_KEY_offset; key_offset <= 0xe0; key_offset += 0x10) { // 256-bit runs up to key offset e0
2697 aes_dec_key(xmm_result, xmm_temp, key, key_offset);
2698 }
2699 load_key(xmm_temp, key, 0x00); // final key is stored in java expanded array at offset 0
2700 __ aesdeclast(xmm_result, xmm_temp);
2701 __ movdqu(xmm_temp, Address(prev_block_cipher_ptr, 0x00));
2702 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
2703 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
2704 // no need to store r to memory until we exit
2705 __ lea(prev_block_cipher_ptr, Address(from, pos, Address::times_1, 0)); // set up new ptr
2706 __ addptr(pos, AESBlockSize);
2707 __ subptr(len_reg, AESBlockSize);
2708 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_256);
2709 __ jmp(L_exit);
2711 return start;
2712 }
2715 public:
2716 // Information about frame layout at time of blocking runtime call.
2717 // Note that we only have to preserve callee-saved registers since
2718 // the compilers are responsible for supplying a continuation point
2719 // if they expect all registers to be preserved.
2720 enum layout {
2721 thread_off, // last_java_sp
2722 arg1_off,
2723 arg2_off,
2724 rbp_off, // callee saved register
2725 ret_pc,
2726 framesize
2727 };
2729 private:
2731 #undef __
2732 #define __ masm->
2734 //------------------------------------------------------------------------------------------------------------------------
2735 // Continuation point for throwing of implicit exceptions that are not handled in
2736 // the current activation. Fabricates an exception oop and initiates normal
2737 // exception dispatching in this frame.
2738 //
2739 // Previously the compiler (c2) allowed for callee save registers on Java calls.
2740 // This is no longer true after adapter frames were removed but could possibly
2741 // be brought back in the future if the interpreter code was reworked and it
2742 // was deemed worthwhile. The comment below was left to describe what must
2743 // happen here if callee saves were resurrected. As it stands now this stub
2744 // could actually be a vanilla BufferBlob and have now oopMap at all.
2745 // Since it doesn't make much difference we've chosen to leave it the
2746 // way it was in the callee save days and keep the comment.
2748 // If we need to preserve callee-saved values we need a callee-saved oop map and
2749 // therefore have to make these stubs into RuntimeStubs rather than BufferBlobs.
2750 // If the compiler needs all registers to be preserved between the fault
2751 // point and the exception handler then it must assume responsibility for that in
2752 // AbstractCompiler::continuation_for_implicit_null_exception or
2753 // continuation_for_implicit_division_by_zero_exception. All other implicit
2754 // exceptions (e.g., NullPointerException or AbstractMethodError on entry) are
2755 // either at call sites or otherwise assume that stack unwinding will be initiated,
2756 // so caller saved registers were assumed volatile in the compiler.
2757 address generate_throw_exception(const char* name, address runtime_entry,
2758 Register arg1 = noreg, Register arg2 = noreg) {
2760 int insts_size = 256;
2761 int locs_size = 32;
2763 CodeBuffer code(name, insts_size, locs_size);
2764 OopMapSet* oop_maps = new OopMapSet();
2765 MacroAssembler* masm = new MacroAssembler(&code);
2767 address start = __ pc();
2769 // This is an inlined and slightly modified version of call_VM
2770 // which has the ability to fetch the return PC out of
2771 // thread-local storage and also sets up last_Java_sp slightly
2772 // differently than the real call_VM
2773 Register java_thread = rbx;
2774 __ get_thread(java_thread);
2776 __ enter(); // required for proper stackwalking of RuntimeStub frame
2778 // pc and rbp, already pushed
2779 __ subptr(rsp, (framesize-2) * wordSize); // prolog
2781 // Frame is now completed as far as size and linkage.
2783 int frame_complete = __ pc() - start;
2785 // push java thread (becomes first argument of C function)
2786 __ movptr(Address(rsp, thread_off * wordSize), java_thread);
2787 if (arg1 != noreg) {
2788 __ movptr(Address(rsp, arg1_off * wordSize), arg1);
2789 }
2790 if (arg2 != noreg) {
2791 assert(arg1 != noreg, "missing reg arg");
2792 __ movptr(Address(rsp, arg2_off * wordSize), arg2);
2793 }
2795 // Set up last_Java_sp and last_Java_fp
2796 __ set_last_Java_frame(java_thread, rsp, rbp, NULL);
2798 // Call runtime
2799 BLOCK_COMMENT("call runtime_entry");
2800 __ call(RuntimeAddress(runtime_entry));
2801 // Generate oop map
2802 OopMap* map = new OopMap(framesize, 0);
2803 oop_maps->add_gc_map(__ pc() - start, map);
2805 // restore the thread (cannot use the pushed argument since arguments
2806 // may be overwritten by C code generated by an optimizing compiler);
2807 // however can use the register value directly if it is callee saved.
2808 __ get_thread(java_thread);
2810 __ reset_last_Java_frame(java_thread, true, false);
2812 __ leave(); // required for proper stackwalking of RuntimeStub frame
2814 // check for pending exceptions
2815 #ifdef ASSERT
2816 Label L;
2817 __ cmpptr(Address(java_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
2818 __ jcc(Assembler::notEqual, L);
2819 __ should_not_reach_here();
2820 __ bind(L);
2821 #endif /* ASSERT */
2822 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
2825 RuntimeStub* stub = RuntimeStub::new_runtime_stub(name, &code, frame_complete, framesize, oop_maps, false);
2826 return stub->entry_point();
2827 }
2830 void create_control_words() {
2831 // Round to nearest, 53-bit mode, exceptions masked
2832 StubRoutines::_fpu_cntrl_wrd_std = 0x027F;
2833 // Round to zero, 53-bit mode, exception mased
2834 StubRoutines::_fpu_cntrl_wrd_trunc = 0x0D7F;
2835 // Round to nearest, 24-bit mode, exceptions masked
2836 StubRoutines::_fpu_cntrl_wrd_24 = 0x007F;
2837 // Round to nearest, 64-bit mode, exceptions masked
2838 StubRoutines::_fpu_cntrl_wrd_64 = 0x037F;
2839 // Round to nearest, 64-bit mode, exceptions masked
2840 StubRoutines::_mxcsr_std = 0x1F80;
2841 // Note: the following two constants are 80-bit values
2842 // layout is critical for correct loading by FPU.
2843 // Bias for strict fp multiply/divide
2844 StubRoutines::_fpu_subnormal_bias1[0]= 0x00000000; // 2^(-15360) == 0x03ff 8000 0000 0000 0000
2845 StubRoutines::_fpu_subnormal_bias1[1]= 0x80000000;
2846 StubRoutines::_fpu_subnormal_bias1[2]= 0x03ff;
2847 // Un-Bias for strict fp multiply/divide
2848 StubRoutines::_fpu_subnormal_bias2[0]= 0x00000000; // 2^(+15360) == 0x7bff 8000 0000 0000 0000
2849 StubRoutines::_fpu_subnormal_bias2[1]= 0x80000000;
2850 StubRoutines::_fpu_subnormal_bias2[2]= 0x7bff;
2851 }
2853 //---------------------------------------------------------------------------
2854 // Initialization
2856 void generate_initial() {
2857 // Generates all stubs and initializes the entry points
2859 //------------------------------------------------------------------------------------------------------------------------
2860 // entry points that exist in all platforms
2861 // Note: This is code that could be shared among different platforms - however the benefit seems to be smaller than
2862 // the disadvantage of having a much more complicated generator structure. See also comment in stubRoutines.hpp.
2863 StubRoutines::_forward_exception_entry = generate_forward_exception();
2865 StubRoutines::_call_stub_entry =
2866 generate_call_stub(StubRoutines::_call_stub_return_address);
2867 // is referenced by megamorphic call
2868 StubRoutines::_catch_exception_entry = generate_catch_exception();
2870 // These are currently used by Solaris/Intel
2871 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg();
2873 StubRoutines::_handler_for_unsafe_access_entry =
2874 generate_handler_for_unsafe_access();
2876 // platform dependent
2877 create_control_words();
2879 StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr();
2880 StubRoutines::x86::_verify_fpu_cntrl_wrd_entry = generate_verify_fpu_cntrl_wrd();
2881 StubRoutines::_d2i_wrapper = generate_d2i_wrapper(T_INT,
2882 CAST_FROM_FN_PTR(address, SharedRuntime::d2i));
2883 StubRoutines::_d2l_wrapper = generate_d2i_wrapper(T_LONG,
2884 CAST_FROM_FN_PTR(address, SharedRuntime::d2l));
2886 // Build this early so it's available for the interpreter
2887 StubRoutines::_throw_StackOverflowError_entry = generate_throw_exception("StackOverflowError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_StackOverflowError));
2888 }
2891 void generate_all() {
2892 // Generates all stubs and initializes the entry points
2894 // These entry points require SharedInfo::stack0 to be set up in non-core builds
2895 // and need to be relocatable, so they each fabricate a RuntimeStub internally.
2896 StubRoutines::_throw_AbstractMethodError_entry = generate_throw_exception("AbstractMethodError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_AbstractMethodError));
2897 StubRoutines::_throw_IncompatibleClassChangeError_entry= generate_throw_exception("IncompatibleClassChangeError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_IncompatibleClassChangeError));
2898 StubRoutines::_throw_NullPointerException_at_call_entry= generate_throw_exception("NullPointerException at call throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException_at_call));
2900 //------------------------------------------------------------------------------------------------------------------------
2901 // entry points that are platform specific
2903 // support for verify_oop (must happen after universe_init)
2904 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop();
2906 // arraycopy stubs used by compilers
2907 generate_arraycopy_stubs();
2909 generate_math_stubs();
2911 // don't bother generating these AES intrinsic stubs unless global flag is set
2912 if (UseAESIntrinsics) {
2913 StubRoutines::x86::_key_shuffle_mask_addr = generate_key_shuffle_mask(); // might be needed by the others
2915 StubRoutines::_aescrypt_encryptBlock = generate_aescrypt_encryptBlock();
2916 StubRoutines::_aescrypt_decryptBlock = generate_aescrypt_decryptBlock();
2917 StubRoutines::_cipherBlockChaining_encryptAESCrypt = generate_cipherBlockChaining_encryptAESCrypt();
2918 StubRoutines::_cipherBlockChaining_decryptAESCrypt = generate_cipherBlockChaining_decryptAESCrypt();
2919 }
2920 }
2923 public:
2924 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) {
2925 if (all) {
2926 generate_all();
2927 } else {
2928 generate_initial();
2929 }
2930 }
2931 }; // end class declaration
2934 void StubGenerator_generate(CodeBuffer* code, bool all) {
2935 StubGenerator g(code, all);
2936 }