Mercurial > jdk8-mips64-public > hotspot / file revision

 /*

  * Copyright (c) 2008, 2011, Oracle and/or its affiliates. All rights reserved.

  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

  *

  * This code is free software; you can redistribute it and/or modify it

  * under the terms of the GNU General Public License version 2 only, as

  * published by the Free Software Foundation.

  *

  * This code is distributed in the hope that it will be useful, but WITHOUT

  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

  * version 2 for more details (a copy is included in the LICENSE file that

  * accompanied this code).

  *

  * You should have received a copy of the GNU General Public License version

  * 2 along with this work; if not, write to the Free Software Foundation,

  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

  *

  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

  * or visit www.oracle.com if you need additional information or have any

  * questions.

  *

  */

 #include "precompiled.hpp"

 #include "interpreter/interpreter.hpp"

 #include "memory/allocation.inline.hpp"

 #include "prims/methodHandles.hpp"

 #define __ _masm->

 #ifdef PRODUCT

 #define BLOCK_COMMENT(str) /* nothing */

 #else

 #define BLOCK_COMMENT(str) __ block_comment(str)

 #endif

 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":")

 address MethodHandleEntry::start_compiled_entry(MacroAssembler* _masm,

                                                 address interpreted_entry) {

   // Just before the actual machine code entry point, allocate space

   // for a MethodHandleEntry::Data record, so that we can manage everything

   // from one base pointer.

   __ align(wordSize);

   address target = __ pc() + sizeof(Data);

   while (__ pc() < target) {

     __ nop();

     __ align(wordSize);

   }

   MethodHandleEntry* me = (MethodHandleEntry*) __ pc();

   me->set_end_address(__ pc());         // set a temporary end_address

   me->set_from_interpreted_entry(interpreted_entry);

   me->set_type_checking_entry(NULL);

   return (address) me;

 }

 MethodHandleEntry* MethodHandleEntry::finish_compiled_entry(MacroAssembler* _masm,

                                                 address start_addr) {

   MethodHandleEntry* me = (MethodHandleEntry*) start_addr;

   assert(me->end_address() == start_addr, "valid ME");

   // Fill in the real end_address:

   __ align(wordSize);

   me->set_end_address(__ pc());

   return me;

 }

 // Code generation

 address MethodHandles::generate_method_handle_interpreter_entry(MacroAssembler* _masm) {

   // I5_savedSP/O5_savedSP: sender SP (must preserve)

   // G4 (Gargs): incoming argument list (must preserve)

   // G5_method:  invoke methodOop

   // G3_method_handle: receiver method handle (must load from sp[MethodTypeForm.vmslots])

   // O0, O1, O2, O3, O4: garbage temps, blown away

   Register O0_mtype   = O0;

   Register O1_scratch = O1;

   Register O2_scratch = O2;

   Register O3_scratch = O3;

   Register O4_argslot = O4;

   Register O4_argbase = O4;

   // emit WrongMethodType path first, to enable back-branch from main path

   Label wrong_method_type;

   __ bind(wrong_method_type);

   Label invoke_generic_slow_path;

   assert(methodOopDesc::intrinsic_id_size_in_bytes() == sizeof(u1), "");;

   __ ldub(Address(G5_method, methodOopDesc::intrinsic_id_offset_in_bytes()), O1_scratch);

   __ cmp(O1_scratch, (int) vmIntrinsics::_invokeExact);

   __ brx(Assembler::notEqual, false, Assembler::pt, invoke_generic_slow_path);

   __ delayed()->nop();

   __ mov(O0_mtype, G5_method_type);  // required by throw_WrongMethodType

   // mov(G3_method_handle, G3_method_handle);  // already in this register

   __ jump_to(AddressLiteral(Interpreter::throw_WrongMethodType_entry()), O1_scratch);

   __ delayed()->nop();

   // here's where control starts out:

   __ align(CodeEntryAlignment);

   address entry_point = __ pc();

   // fetch the MethodType from the method handle

   {

     Register tem = G5_method;

     for (jint* pchase = methodOopDesc::method_type_offsets_chain(); (*pchase) != -1; pchase++) {

       __ ld_ptr(Address(tem, *pchase), O0_mtype);

       tem = O0_mtype;          // in case there is another indirection

     }

   }

   // given the MethodType, find out where the MH argument is buried

   __ load_heap_oop(Address(O0_mtype,   __ delayed_value(java_lang_invoke_MethodType::form_offset_in_bytes,        O1_scratch)), O4_argslot);

   __ ldsw(         Address(O4_argslot, __ delayed_value(java_lang_invoke_MethodTypeForm::vmslots_offset_in_bytes, O1_scratch)), O4_argslot);

   __ add(Gargs, __ argument_offset(O4_argslot, 1), O4_argbase);

   // Note: argument_address uses its input as a scratch register!

   __ ld_ptr(Address(O4_argbase, -Interpreter::stackElementSize), G3_method_handle);

   trace_method_handle(_masm, "invokeExact");

   __ check_method_handle_type(O0_mtype, G3_method_handle, O1_scratch, wrong_method_type);

   __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

   // for invokeGeneric (only), apply argument and result conversions on the fly

   __ bind(invoke_generic_slow_path);

 #ifdef ASSERT

   { Label L;

     __ ldub(Address(G5_method, methodOopDesc::intrinsic_id_offset_in_bytes()), O1_scratch);

     __ cmp(O1_scratch, (int) vmIntrinsics::_invokeGeneric);

     __ brx(Assembler::equal, false, Assembler::pt, L);

     __ delayed()->nop();

     __ stop("bad methodOop::intrinsic_id");

     __ bind(L);

   }

 #endif //ASSERT

   // make room on the stack for another pointer:

   insert_arg_slots(_masm, 2 * stack_move_unit(), _INSERT_REF_MASK, O4_argbase, O1_scratch, O2_scratch, O3_scratch);

   // load up an adapter from the calling type (Java weaves this)

   Register O2_form    = O2_scratch;

   Register O3_adapter = O3_scratch;

   __ load_heap_oop(Address(O0_mtype, __ delayed_value(java_lang_invoke_MethodType::form_offset_in_bytes,               O1_scratch)), O2_form);

   // load_heap_oop(Address(O2_form,  __ delayed_value(java_lang_invoke_MethodTypeForm::genericInvoker_offset_in_bytes, O1_scratch)), O3_adapter);

   // deal with old JDK versions:

   __ add(          Address(O2_form,  __ delayed_value(java_lang_invoke_MethodTypeForm::genericInvoker_offset_in_bytes, O1_scratch)), O3_adapter);

   __ cmp(O3_adapter, O2_form);

   Label sorry_no_invoke_generic;

   __ brx(Assembler::lessUnsigned, false, Assembler::pn, sorry_no_invoke_generic);

   __ delayed()->nop();

   __ load_heap_oop(Address(O3_adapter, 0), O3_adapter);

   __ tst(O3_adapter);

   __ brx(Assembler::zero, false, Assembler::pn, sorry_no_invoke_generic);

   __ delayed()->nop();

   __ st_ptr(O3_adapter, Address(O4_argbase, 1 * Interpreter::stackElementSize));

   // As a trusted first argument, pass the type being called, so the adapter knows

   // the actual types of the arguments and return values.

   // (Generic invokers are shared among form-families of method-type.)

   __ st_ptr(O0_mtype,   Address(O4_argbase, 0 * Interpreter::stackElementSize));

   // FIXME: assert that O3_adapter is of the right method-type.

   __ mov(O3_adapter, G3_method_handle);

   trace_method_handle(_masm, "invokeGeneric");

   __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

   __ bind(sorry_no_invoke_generic); // no invokeGeneric implementation available!

   __ mov(O0_mtype, G5_method_type);  // required by throw_WrongMethodType

   // mov(G3_method_handle, G3_method_handle);  // already in this register

   __ jump_to(AddressLiteral(Interpreter::throw_WrongMethodType_entry()), O1_scratch);

   __ delayed()->nop();

   return entry_point;

 }

 #ifdef ASSERT

 static void verify_argslot(MacroAssembler* _masm, Register argslot_reg, Register temp_reg, const char* error_message) {

   // Verify that argslot lies within (Gargs, FP].

   Label L_ok, L_bad;

   BLOCK_COMMENT("{ verify_argslot");

 #ifdef _LP64

   __ add(FP, STACK_BIAS, temp_reg);

   __ cmp(argslot_reg, temp_reg);

 #else

   __ cmp(argslot_reg, FP);

 #endif

   __ brx(Assembler::greaterUnsigned, false, Assembler::pn, L_bad);

   __ delayed()->nop();

   __ cmp(Gargs, argslot_reg);

   __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, L_ok);

   __ delayed()->nop();

   __ bind(L_bad);

   __ stop(error_message);

   __ bind(L_ok);

   BLOCK_COMMENT("} verify_argslot");

 }

 #endif

 // Helper to insert argument slots into the stack.

 // arg_slots must be a multiple of stack_move_unit() and <= 0

 void MethodHandles::insert_arg_slots(MacroAssembler* _masm,

                                      RegisterOrConstant arg_slots,

                                      int arg_mask,

                                      Register argslot_reg,

                                      Register temp_reg, Register temp2_reg, Register temp3_reg) {

   assert(temp3_reg != noreg, "temp3 required");

   assert_different_registers(argslot_reg, temp_reg, temp2_reg, temp3_reg,

                              (!arg_slots.is_register() ? Gargs : arg_slots.as_register()));

 #ifdef ASSERT

   verify_argslot(_masm, argslot_reg, temp_reg, "insertion point must fall within current frame");

   if (arg_slots.is_register()) {

     Label L_ok, L_bad;

     __ cmp(arg_slots.as_register(), (int32_t) NULL_WORD);

     __ br(Assembler::greater, false, Assembler::pn, L_bad);

     __ delayed()->nop();

     __ btst(-stack_move_unit() - 1, arg_slots.as_register());

     __ br(Assembler::zero, false, Assembler::pt, L_ok);

     __ delayed()->nop();

     __ bind(L_bad);

     __ stop("assert arg_slots <= 0 and clear low bits");

     __ bind(L_ok);

   } else {

     assert(arg_slots.as_constant() <= 0, "");

     assert(arg_slots.as_constant() % -stack_move_unit() == 0, "");

   }

 #endif // ASSERT

 #ifdef _LP64

   if (arg_slots.is_register()) {

     // Was arg_slots register loaded as signed int?

     Label L_ok;

     __ sll(arg_slots.as_register(), BitsPerInt, temp_reg);

     __ sra(temp_reg, BitsPerInt, temp_reg);

     __ cmp(arg_slots.as_register(), temp_reg);

     __ br(Assembler::equal, false, Assembler::pt, L_ok);

     __ delayed()->nop();

     __ stop("arg_slots register not loaded as signed int");

     __ bind(L_ok);

   }

 #endif

   // Make space on the stack for the inserted argument(s).

   // Then pull down everything shallower than argslot_reg.

   // The stacked return address gets pulled down with everything else.

   // That is, copy [sp, argslot) downward by -size words.  In pseudo-code:

   //   sp -= size;

   //   for (temp = sp + size; temp < argslot; temp++)

   //     temp[-size] = temp[0]

   //   argslot -= size;

   BLOCK_COMMENT("insert_arg_slots {");

   RegisterOrConstant offset = __ regcon_sll_ptr(arg_slots, LogBytesPerWord, temp3_reg);

   // Keep the stack pointer 2*wordSize aligned.

   const int TwoWordAlignmentMask = right_n_bits(LogBytesPerWord + 1);

   RegisterOrConstant masked_offset = __ regcon_andn_ptr(offset, TwoWordAlignmentMask, temp_reg);

   __ add(SP, masked_offset, SP);

   __ mov(Gargs, temp_reg);  // source pointer for copy

   __ add(Gargs, offset, Gargs);

   {

     Label loop;

     __ BIND(loop);

     // pull one word down each time through the loop

     __ ld_ptr(Address(temp_reg, 0), temp2_reg);

     __ st_ptr(temp2_reg, Address(temp_reg, offset));

     __ add(temp_reg, wordSize, temp_reg);

     __ cmp(temp_reg, argslot_reg);

     __ brx(Assembler::less, false, Assembler::pt, loop);

     __ delayed()->nop();  // FILLME

   }

   // Now move the argslot down, to point to the opened-up space.

   __ add(argslot_reg, offset, argslot_reg);

   BLOCK_COMMENT("} insert_arg_slots");

 }

 // Helper to remove argument slots from the stack.

 // arg_slots must be a multiple of stack_move_unit() and >= 0

 void MethodHandles::remove_arg_slots(MacroAssembler* _masm,

                                      RegisterOrConstant arg_slots,

                                      Register argslot_reg,

                                      Register temp_reg, Register temp2_reg, Register temp3_reg) {

   assert(temp3_reg != noreg, "temp3 required");

   assert_different_registers(argslot_reg, temp_reg, temp2_reg, temp3_reg,

                              (!arg_slots.is_register() ? Gargs : arg_slots.as_register()));

   RegisterOrConstant offset = __ regcon_sll_ptr(arg_slots, LogBytesPerWord, temp3_reg);

 #ifdef ASSERT

   // Verify that [argslot..argslot+size) lies within (Gargs, FP).

   __ add(argslot_reg, offset, temp2_reg);

   verify_argslot(_masm, temp2_reg, temp_reg, "deleted argument(s) must fall within current frame");

   if (arg_slots.is_register()) {

     Label L_ok, L_bad;

     __ cmp(arg_slots.as_register(), (int32_t) NULL_WORD);

     __ br(Assembler::less, false, Assembler::pn, L_bad);

     __ delayed()->nop();

     __ btst(-stack_move_unit() - 1, arg_slots.as_register());

     __ br(Assembler::zero, false, Assembler::pt, L_ok);

     __ delayed()->nop();

     __ bind(L_bad);

     __ stop("assert arg_slots >= 0 and clear low bits");

     __ bind(L_ok);

   } else {

     assert(arg_slots.as_constant() >= 0, "");

     assert(arg_slots.as_constant() % -stack_move_unit() == 0, "");

   }

 #endif // ASSERT

   BLOCK_COMMENT("remove_arg_slots {");

   // Pull up everything shallower than argslot.

   // Then remove the excess space on the stack.

   // The stacked return address gets pulled up with everything else.

   // That is, copy [sp, argslot) upward by size words.  In pseudo-code:

   //   for (temp = argslot-1; temp >= sp; --temp)

   //     temp[size] = temp[0]

   //   argslot += size;

   //   sp += size;

   __ sub(argslot_reg, wordSize, temp_reg);  // source pointer for copy

   {

     Label loop;

     __ BIND(loop);

     // pull one word up each time through the loop

     __ ld_ptr(Address(temp_reg, 0), temp2_reg);

     __ st_ptr(temp2_reg, Address(temp_reg, offset));

     __ sub(temp_reg, wordSize, temp_reg);

     __ cmp(temp_reg, Gargs);

     __ brx(Assembler::greaterEqual, false, Assembler::pt, loop);

     __ delayed()->nop();  // FILLME

   }

   // Now move the argslot up, to point to the just-copied block.

   __ add(Gargs, offset, Gargs);

   // And adjust the argslot address to point at the deletion point.

   __ add(argslot_reg, offset, argslot_reg);

   // Keep the stack pointer 2*wordSize aligned.

   const int TwoWordAlignmentMask = right_n_bits(LogBytesPerWord + 1);

   RegisterOrConstant masked_offset = __ regcon_andn_ptr(offset, TwoWordAlignmentMask, temp_reg);

   __ add(SP, masked_offset, SP);

   BLOCK_COMMENT("} remove_arg_slots");

 }

 #ifndef PRODUCT

 extern "C" void print_method_handle(oop mh);

 void trace_method_handle_stub(const char* adaptername,

                               oopDesc* mh) {

   printf("MH %s mh="INTPTR_FORMAT"\n", adaptername, (intptr_t) mh);

   print_method_handle(mh);

 }

 void MethodHandles::trace_method_handle(MacroAssembler* _masm, const char* adaptername) {

   if (!TraceMethodHandles)  return;

   BLOCK_COMMENT("trace_method_handle {");

   // save: Gargs, O5_savedSP

   __ save_frame(16);

   __ set((intptr_t) adaptername, O0);

   __ mov(G3_method_handle, O1);

   __ mov(G3_method_handle, L3);

   __ mov(Gargs, L4);

   __ mov(G5_method_type, L5);

   __ call_VM_leaf(L7, CAST_FROM_FN_PTR(address, trace_method_handle_stub));

   __ mov(L3, G3_method_handle);

   __ mov(L4, Gargs);

   __ mov(L5, G5_method_type);

   __ restore();

   BLOCK_COMMENT("} trace_method_handle");

 }

 #endif // PRODUCT

 // which conversion op types are implemented here?

 int MethodHandles::adapter_conversion_ops_supported_mask() {

   return ((1<<java_lang_invoke_AdapterMethodHandle::OP_RETYPE_ONLY)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_RETYPE_RAW)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_CHECK_CAST)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_PRIM_TO_PRIM)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_REF_TO_PRIM)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_SWAP_ARGS)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_ROT_ARGS)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_DUP_ARGS)

          |(1<<java_lang_invoke_AdapterMethodHandle::OP_DROP_ARGS)

          //|(1<<java_lang_invoke_AdapterMethodHandle::OP_SPREAD_ARGS) //BUG!

          );

   // FIXME: MethodHandlesTest gets a crash if we enable OP_SPREAD_ARGS.

 }

 //------------------------------------------------------------------------------

 // MethodHandles::generate_method_handle_stub

 //

 // Generate an "entry" field for a method handle.

 // This determines how the method handle will respond to calls.

 void MethodHandles::generate_method_handle_stub(MacroAssembler* _masm, MethodHandles::EntryKind ek) {

   // Here is the register state during an interpreted call,

   // as set up by generate_method_handle_interpreter_entry():

   // - G5: garbage temp (was MethodHandle.invoke methodOop, unused)

   // - G3: receiver method handle

   // - O5_savedSP: sender SP (must preserve)

   const Register O0_argslot = O0;

   const Register O1_scratch = O1;

   const Register O2_scratch = O2;

   const Register O3_scratch = O3;

   const Register G5_index   = G5;

   // Argument registers for _raise_exception.

   const Register O0_code     = O0;

   const Register O1_actual   = O1;

   const Register O2_required = O2;

   guarantee(java_lang_invoke_MethodHandle::vmentry_offset_in_bytes() != 0, "must have offsets");

   // Some handy addresses:

   Address G5_method_fie(    G5_method,        in_bytes(methodOopDesc::from_interpreted_offset()));

   Address G5_method_fce(    G5_method,        in_bytes(methodOopDesc::from_compiled_offset()));

   Address G3_mh_vmtarget(   G3_method_handle, java_lang_invoke_MethodHandle::vmtarget_offset_in_bytes());

   Address G3_dmh_vmindex(   G3_method_handle, java_lang_invoke_DirectMethodHandle::vmindex_offset_in_bytes());

   Address G3_bmh_vmargslot( G3_method_handle, java_lang_invoke_BoundMethodHandle::vmargslot_offset_in_bytes());

   Address G3_bmh_argument(  G3_method_handle, java_lang_invoke_BoundMethodHandle::argument_offset_in_bytes());

   Address G3_amh_vmargslot( G3_method_handle, java_lang_invoke_AdapterMethodHandle::vmargslot_offset_in_bytes());

   Address G3_amh_argument ( G3_method_handle, java_lang_invoke_AdapterMethodHandle::argument_offset_in_bytes());

   Address G3_amh_conversion(G3_method_handle, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes());

   const int java_mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();

   if (have_entry(ek)) {

     __ nop();  // empty stubs make SG sick

     return;

   }

   address interp_entry = __ pc();

   trace_method_handle(_masm, entry_name(ek));

   switch ((int) ek) {

   case _raise_exception:

     {

       // Not a real MH entry, but rather shared code for raising an

       // exception.  Since we use the compiled entry, arguments are

       // expected in compiler argument registers.

       assert(raise_exception_method(), "must be set");

       assert(raise_exception_method()->from_compiled_entry(), "method must be linked");

       __ mov(O5_savedSP, SP);  // Cut the stack back to where the caller started.

       Label L_no_method;

       // FIXME: fill in _raise_exception_method with a suitable java.lang.invoke method

       __ set(AddressLiteral((address) &_raise_exception_method), G5_method);

       __ ld_ptr(Address(G5_method, 0), G5_method);

       __ tst(G5_method);

       __ brx(Assembler::zero, false, Assembler::pn, L_no_method);

       __ delayed()->nop();

       const int jobject_oop_offset = 0;

       __ ld_ptr(Address(G5_method, jobject_oop_offset), G5_method);

       __ tst(G5_method);

       __ brx(Assembler::zero, false, Assembler::pn, L_no_method);

       __ delayed()->nop();

       __ verify_oop(G5_method);

       __ jump_indirect_to(G5_method_fce, O3_scratch);  // jump to compiled entry

       __ delayed()->nop();

       // Do something that is at least causes a valid throw from the interpreter.

       __ bind(L_no_method);

       __ unimplemented("call throw_WrongMethodType_entry");

     }

     break;

   case _invokestatic_mh:

   case _invokespecial_mh:

     {

       __ load_heap_oop(G3_mh_vmtarget, G5_method);  // target is a methodOop

       __ verify_oop(G5_method);

       // Same as TemplateTable::invokestatic or invokespecial,

       // minus the CP setup and profiling:

       if (ek == _invokespecial_mh) {

         // Must load & check the first argument before entering the target method.

         __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);

         __ ld_ptr(__ argument_address(O0_argslot), G3_method_handle);

         __ null_check(G3_method_handle);

         __ verify_oop(G3_method_handle);

       }

       __ jump_indirect_to(G5_method_fie, O1_scratch);

       __ delayed()->nop();

     }

     break;

   case _invokevirtual_mh:

     {

       // Same as TemplateTable::invokevirtual,

       // minus the CP setup and profiling:

       // Pick out the vtable index and receiver offset from the MH,

       // and then we can discard it:

       __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);

       __ ldsw(G3_dmh_vmindex, G5_index);

       // Note:  The verifier allows us to ignore G3_mh_vmtarget.

       __ ld_ptr(__ argument_address(O0_argslot, -1), G3_method_handle);

       __ null_check(G3_method_handle, oopDesc::klass_offset_in_bytes());

       // Get receiver klass:

       Register O0_klass = O0_argslot;

       __ load_klass(G3_method_handle, O0_klass);

       __ verify_oop(O0_klass);

       // Get target methodOop & entry point:

       const int base = instanceKlass::vtable_start_offset() * wordSize;

       assert(vtableEntry::size() * wordSize == wordSize, "adjust the scaling in the code below");

       __ sll_ptr(G5_index, LogBytesPerWord, G5_index);

       __ add(O0_klass, G5_index, O0_klass);

       Address vtable_entry_addr(O0_klass, base + vtableEntry::method_offset_in_bytes());

       __ ld_ptr(vtable_entry_addr, G5_method);

       __ verify_oop(G5_method);

       __ jump_indirect_to(G5_method_fie, O1_scratch);

       __ delayed()->nop();

     }

     break;

   case _invokeinterface_mh:

     {

       // Same as TemplateTable::invokeinterface,

       // minus the CP setup and profiling:

       __ load_method_handle_vmslots(O0_argslot, G3_method_handle, O1_scratch);

       Register O1_intf  = O1_scratch;

       __ load_heap_oop(G3_mh_vmtarget, O1_intf);

       __ ldsw(G3_dmh_vmindex, G5_index);

       __ ld_ptr(__ argument_address(O0_argslot, -1), G3_method_handle);

       __ null_check(G3_method_handle, oopDesc::klass_offset_in_bytes());

       // Get receiver klass:

       Register O0_klass = O0_argslot;

       __ load_klass(G3_method_handle, O0_klass);

       __ verify_oop(O0_klass);

       // Get interface:

       Label no_such_interface;

       __ verify_oop(O1_intf);

       __ lookup_interface_method(O0_klass, O1_intf,

                                  // Note: next two args must be the same:

                                  G5_index, G5_method,

                                  O2_scratch,

                                  O3_scratch,

                                  no_such_interface);

       __ verify_oop(G5_method);

       __ jump_indirect_to(G5_method_fie, O1_scratch);

       __ delayed()->nop();

       __ bind(no_such_interface);

       // Throw an exception.

       // For historical reasons, it will be IncompatibleClassChangeError.

       __ unimplemented("not tested yet");

       __ ld_ptr(Address(O1_intf, java_mirror_offset), O2_required);  // required interface

       __ mov(   O0_klass,                             O1_actual);    // bad receiver

       __ jump_to(AddressLiteral(from_interpreted_entry(_raise_exception)), O3_scratch);

       __ delayed()->mov(Bytecodes::_invokeinterface,  O0_code);      // who is complaining?

     }

     break;

   case _bound_ref_mh:

   case _bound_int_mh:

   case _bound_long_mh:

   case _bound_ref_direct_mh:

   case _bound_int_direct_mh:

   case _bound_long_direct_mh:

     {

       const bool direct_to_method = (ek >= _bound_ref_direct_mh);

       BasicType arg_type  = T_ILLEGAL;

       int       arg_mask  = _INSERT_NO_MASK;

       int       arg_slots = -1;

       get_ek_bound_mh_info(ek, arg_type, arg_mask, arg_slots);

       // Make room for the new argument:

       __ ldsw(G3_bmh_vmargslot, O0_argslot);

       __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);

       insert_arg_slots(_masm, arg_slots * stack_move_unit(), arg_mask, O0_argslot, O1_scratch, O2_scratch, G5_index);

       // Store bound argument into the new stack slot:

       __ load_heap_oop(G3_bmh_argument, O1_scratch);

       if (arg_type == T_OBJECT) {

         __ st_ptr(O1_scratch, Address(O0_argslot, 0));

       } else {

         Address prim_value_addr(O1_scratch, java_lang_boxing_object::value_offset_in_bytes(arg_type));

         const int arg_size = type2aelembytes(arg_type);

         __ load_sized_value(prim_value_addr, O2_scratch, arg_size, is_signed_subword_type(arg_type));

         __ store_sized_value(O2_scratch, Address(O0_argslot, 0), arg_size);  // long store uses O2/O3 on !_LP64

       }

       if (direct_to_method) {

         __ load_heap_oop(G3_mh_vmtarget, G5_method);  // target is a methodOop

         __ verify_oop(G5_method);

         __ jump_indirect_to(G5_method_fie, O1_scratch);

         __ delayed()->nop();

       } else {

         __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);  // target is a methodOop

         __ verify_oop(G3_method_handle);

         __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

       }

     }

     break;

   case _adapter_retype_only:

   case _adapter_retype_raw:

     // Immediately jump to the next MH layer:

     __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

     __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     // This is OK when all parameter types widen.

     // It is also OK when a return type narrows.

     break;

   case _adapter_check_cast:

     {

       // Temps:

       Register G5_klass = G5_index;  // Interesting AMH data.

       // Check a reference argument before jumping to the next layer of MH:

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       Address vmarg = __ argument_address(O0_argslot);

       // What class are we casting to?

       __ load_heap_oop(G3_amh_argument, G5_klass);  // This is a Class object!

       __ load_heap_oop(Address(G5_klass, java_lang_Class::klass_offset_in_bytes()), G5_klass);

       Label done;

       __ ld_ptr(vmarg, O1_scratch);

       __ tst(O1_scratch);

       __ brx(Assembler::zero, false, Assembler::pn, done);  // No cast if null.

       __ delayed()->nop();

       __ load_klass(O1_scratch, O1_scratch);

       // Live at this point:

       // - G5_klass        :  klass required by the target method

       // - O1_scratch      :  argument klass to test

       // - G3_method_handle:  adapter method handle

       __ check_klass_subtype(O1_scratch, G5_klass, O0_argslot, O2_scratch, done);

       // If we get here, the type check failed!

       __ load_heap_oop(G3_amh_argument,        O2_required);  // required class

       __ ld_ptr(       vmarg,                  O1_actual);    // bad object

       __ jump_to(AddressLiteral(from_interpreted_entry(_raise_exception)), O3_scratch);

       __ delayed()->mov(Bytecodes::_checkcast, O0_code);      // who is complaining?

       __ bind(done);

       // Get the new MH:

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_prim_to_prim:

   case _adapter_ref_to_prim:

     // Handled completely by optimized cases.

     __ stop("init_AdapterMethodHandle should not issue this");

     break;

   case _adapter_opt_i2i:        // optimized subcase of adapt_prim_to_prim

 //case _adapter_opt_f2i:        // optimized subcase of adapt_prim_to_prim

   case _adapter_opt_l2i:        // optimized subcase of adapt_prim_to_prim

   case _adapter_opt_unboxi:     // optimized subcase of adapt_ref_to_prim

     {

       // Perform an in-place conversion to int or an int subword.

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       Address value;

       Address vmarg = __ argument_address(O0_argslot);

       bool value_left_justified = false;

       switch (ek) {

       case _adapter_opt_i2i:

         value = vmarg;

         break;

       case _adapter_opt_l2i:

         {

           // just delete the extra slot

 #ifdef _LP64

           // In V9, longs are given 2 64-bit slots in the interpreter, but the

           // data is passed in only 1 slot.

           // Keep the second slot.

           __ add(Gargs, __ argument_offset(O0_argslot, -1), O0_argslot);

           remove_arg_slots(_masm, -stack_move_unit(), O0_argslot, O1_scratch, O2_scratch, O3_scratch);

           value = Address(O0_argslot, 4);  // Get least-significant 32-bit of 64-bit value.

           vmarg = Address(O0_argslot, Interpreter::stackElementSize);

 #else

           // Keep the first slot.

           __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);

           remove_arg_slots(_masm, -stack_move_unit(), O0_argslot, O1_scratch, O2_scratch, O3_scratch);

           value = Address(O0_argslot, 0);

           vmarg = value;

 #endif

         }

         break;

       case _adapter_opt_unboxi:

         {

           // Load the value up from the heap.

           __ ld_ptr(vmarg, O1_scratch);

           int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_INT);

 #ifdef ASSERT

           for (int bt = T_BOOLEAN; bt < T_INT; bt++) {

             if (is_subword_type(BasicType(bt)))

               assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(BasicType(bt)), "");

           }

 #endif

           __ null_check(O1_scratch, value_offset);

           value = Address(O1_scratch, value_offset);

 #ifdef _BIG_ENDIAN

           // Values stored in objects are packed.

           value_left_justified = true;

 #endif

         }

         break;

       default:

         ShouldNotReachHere();

       }

       // This check is required on _BIG_ENDIAN

       Register G5_vminfo = G5_index;

       __ ldsw(G3_amh_conversion, G5_vminfo);

       assert(CONV_VMINFO_SHIFT == 0, "preshifted");

       // Original 32-bit vmdata word must be of this form:

       // | MBZ:6 | signBitCount:8 | srcDstTypes:8 | conversionOp:8 |

       __ lduw(value, O1_scratch);

       if (!value_left_justified)

         __ sll(O1_scratch, G5_vminfo, O1_scratch);

       Label zero_extend, done;

       __ btst(CONV_VMINFO_SIGN_FLAG, G5_vminfo);

       __ br(Assembler::zero, false, Assembler::pn, zero_extend);

       __ delayed()->nop();

       // this path is taken for int->byte, int->short

       __ sra(O1_scratch, G5_vminfo, O1_scratch);

       __ ba(false, done);

       __ delayed()->nop();

       __ bind(zero_extend);

       // this is taken for int->char

       __ srl(O1_scratch, G5_vminfo, O1_scratch);

       __ bind(done);

       __ st(O1_scratch, vmarg);

       // Get the new MH:

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_opt_i2l:        // optimized subcase of adapt_prim_to_prim

   case _adapter_opt_unboxl:     // optimized subcase of adapt_ref_to_prim

     {

       // Perform an in-place int-to-long or ref-to-long conversion.

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       // On big-endian machine we duplicate the slot and store the MSW

       // in the first slot.

       __ add(Gargs, __ argument_offset(O0_argslot, 1), O0_argslot);

       insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK, O0_argslot, O1_scratch, O2_scratch, G5_index);

       Address arg_lsw(O0_argslot, 0);

       Address arg_msw(O0_argslot, -Interpreter::stackElementSize);

       switch (ek) {

       case _adapter_opt_i2l:

         {

 #ifdef _LP64

           __ ldsw(arg_lsw, O2_scratch);                 // Load LSW sign-extended

 #else

           __ ldsw(arg_lsw, O3_scratch);                 // Load LSW sign-extended

           __ srlx(O3_scratch, BitsPerInt, O2_scratch);  // Move MSW value to lower 32-bits for std

 #endif

           __ st_long(O2_scratch, arg_msw);              // Uses O2/O3 on !_LP64

         }

         break;

       case _adapter_opt_unboxl:

         {

           // Load the value up from the heap.

           __ ld_ptr(arg_lsw, O1_scratch);

           int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_LONG);

           assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(T_DOUBLE), "");

           __ null_check(O1_scratch, value_offset);

           __ ld_long(Address(O1_scratch, value_offset), O2_scratch);  // Uses O2/O3 on !_LP64

           __ st_long(O2_scratch, arg_msw);

         }

         break;

       default:

         ShouldNotReachHere();

       }

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_opt_f2d:        // optimized subcase of adapt_prim_to_prim

   case _adapter_opt_d2f:        // optimized subcase of adapt_prim_to_prim

     {

       // perform an in-place floating primitive conversion

       __ unimplemented(entry_name(ek));

     }

     break;

   case _adapter_prim_to_ref:

     __ unimplemented(entry_name(ek)); // %%% FIXME: NYI

     break;

   case _adapter_swap_args:

   case _adapter_rot_args:

     // handled completely by optimized cases

     __ stop("init_AdapterMethodHandle should not issue this");

     break;

   case _adapter_opt_swap_1:

   case _adapter_opt_swap_2:

   case _adapter_opt_rot_1_up:

   case _adapter_opt_rot_1_down:

   case _adapter_opt_rot_2_up:

   case _adapter_opt_rot_2_down:

     {

       int swap_bytes = 0, rotate = 0;

       get_ek_adapter_opt_swap_rot_info(ek, swap_bytes, rotate);

       // 'argslot' is the position of the first argument to swap.

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);

       // 'vminfo' is the second.

       Register O1_destslot = O1_scratch;

       __ ldsw(G3_amh_conversion, O1_destslot);

       assert(CONV_VMINFO_SHIFT == 0, "preshifted");

       __ and3(O1_destslot, CONV_VMINFO_MASK, O1_destslot);

       __ add(Gargs, __ argument_offset(O1_destslot), O1_destslot);

       if (!rotate) {

         for (int i = 0; i < swap_bytes; i += wordSize) {

           __ ld_ptr(Address(O0_argslot,  i), O2_scratch);

           __ ld_ptr(Address(O1_destslot, i), O3_scratch);

           __ st_ptr(O3_scratch, Address(O0_argslot,  i));

           __ st_ptr(O2_scratch, Address(O1_destslot, i));

         }

       } else {

         // Save the first chunk, which is going to get overwritten.

         switch (swap_bytes) {

         case 4 : __ lduw(Address(O0_argslot, 0), O2_scratch); break;

         case 16: __ ldx( Address(O0_argslot, 8), O3_scratch); //fall-thru

         case 8 : __ ldx( Address(O0_argslot, 0), O2_scratch); break;

         default: ShouldNotReachHere();

         }

         if (rotate > 0) {

           // Rorate upward.

           __ sub(O0_argslot, swap_bytes, O0_argslot);

 #if ASSERT

           {

             // Verify that argslot > destslot, by at least swap_bytes.

             Label L_ok;

             __ cmp(O0_argslot, O1_destslot);

             __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, L_ok);

             __ delayed()->nop();

             __ stop("source must be above destination (upward rotation)");

             __ bind(L_ok);

           }

 #endif

           // Work argslot down to destslot, copying contiguous data upwards.

           // Pseudo-code:

           //   argslot  = src_addr - swap_bytes

           //   destslot = dest_addr

           //   while (argslot >= destslot) {

           //     *(argslot + swap_bytes) = *(argslot + 0);

           //     argslot--;

           //   }

           Label loop;

           __ bind(loop);

           __ ld_ptr(Address(O0_argslot, 0), G5_index);

           __ st_ptr(G5_index, Address(O0_argslot, swap_bytes));

           __ sub(O0_argslot, wordSize, O0_argslot);

           __ cmp(O0_argslot, O1_destslot);

           __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, loop);

           __ delayed()->nop();  // FILLME

         } else {

           __ add(O0_argslot, swap_bytes, O0_argslot);

 #if ASSERT

           {

             // Verify that argslot < destslot, by at least swap_bytes.

             Label L_ok;

             __ cmp(O0_argslot, O1_destslot);

             __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, L_ok);

             __ delayed()->nop();

             __ stop("source must be above destination (upward rotation)");

             __ bind(L_ok);

           }

 #endif

           // Work argslot up to destslot, copying contiguous data downwards.

           // Pseudo-code:

           //   argslot  = src_addr + swap_bytes

           //   destslot = dest_addr

           //   while (argslot >= destslot) {

           //     *(argslot - swap_bytes) = *(argslot + 0);

           //     argslot++;

           //   }

           Label loop;

           __ bind(loop);

           __ ld_ptr(Address(O0_argslot, 0), G5_index);

           __ st_ptr(G5_index, Address(O0_argslot, -swap_bytes));

           __ add(O0_argslot, wordSize, O0_argslot);

           __ cmp(O0_argslot, O1_destslot);

           __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, loop);

           __ delayed()->nop();  // FILLME

         }

         // Store the original first chunk into the destination slot, now free.

         switch (swap_bytes) {

         case 4 : __ stw(O2_scratch, Address(O1_destslot, 0)); break;

         case 16: __ stx(O3_scratch, Address(O1_destslot, 8)); // fall-thru

         case 8 : __ stx(O2_scratch, Address(O1_destslot, 0)); break;

         default: ShouldNotReachHere();

         }

       }

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_dup_args:

     {

       // 'argslot' is the position of the first argument to duplicate.

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);

       // 'stack_move' is negative number of words to duplicate.

       Register G5_stack_move = G5_index;

       __ ldsw(G3_amh_conversion, G5_stack_move);

       __ sra(G5_stack_move, CONV_STACK_MOVE_SHIFT, G5_stack_move);

       // Remember the old Gargs (argslot[0]).

       Register O1_oldarg = O1_scratch;

       __ mov(Gargs, O1_oldarg);

       // Move Gargs down to make room for dups.

       __ sll_ptr(G5_stack_move, LogBytesPerWord, G5_stack_move);

       __ add(Gargs, G5_stack_move, Gargs);

       // Compute the new Gargs (argslot[0]).

       Register O2_newarg = O2_scratch;

       __ mov(Gargs, O2_newarg);

       // Copy from oldarg[0...] down to newarg[0...]

       // Pseude-code:

       //   O1_oldarg  = old-Gargs

       //   O2_newarg  = new-Gargs

       //   O0_argslot = argslot

       //   while (O2_newarg < O1_oldarg) *O2_newarg = *O0_argslot++

       Label loop;

       __ bind(loop);

       __ ld_ptr(Address(O0_argslot, 0), O3_scratch);

       __ st_ptr(O3_scratch, Address(O2_newarg, 0));

       __ add(O0_argslot, wordSize, O0_argslot);

       __ add(O2_newarg,  wordSize, O2_newarg);

       __ cmp(O2_newarg, O1_oldarg);

       __ brx(Assembler::less, false, Assembler::pt, loop);

       __ delayed()->nop();  // FILLME

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_drop_args:

     {

       // 'argslot' is the position of the first argument to nuke.

       __ ldsw(G3_amh_vmargslot, O0_argslot);

       __ add(Gargs, __ argument_offset(O0_argslot), O0_argslot);

       // 'stack_move' is number of words to drop.

       Register G5_stack_move = G5_index;

       __ ldsw(G3_amh_conversion, G5_stack_move);

       __ sra(G5_stack_move, CONV_STACK_MOVE_SHIFT, G5_stack_move);

       remove_arg_slots(_masm, G5_stack_move, O0_argslot, O1_scratch, O2_scratch, O3_scratch);

       __ load_heap_oop(G3_mh_vmtarget, G3_method_handle);

       __ jump_to_method_handle_entry(G3_method_handle, O1_scratch);

     }

     break;

   case _adapter_collect_args:

     __ unimplemented(entry_name(ek)); // %%% FIXME: NYI

     break;

   case _adapter_spread_args:

     // Handled completely by optimized cases.

     __ stop("init_AdapterMethodHandle should not issue this");

     break;

   case _adapter_opt_spread_0:

   case _adapter_opt_spread_1:

   case _adapter_opt_spread_more:

     {

       // spread an array out into a group of arguments

       __ unimplemented(entry_name(ek));

     }

     break;

   case _adapter_flyby:

   case _adapter_ricochet:

     __ unimplemented(entry_name(ek)); // %%% FIXME: NYI

     break;

   default:

     ShouldNotReachHere();

   }

   address me_cookie = MethodHandleEntry::start_compiled_entry(_masm, interp_entry);

   __ unimplemented(entry_name(ek)); // %%% FIXME: NYI

   init_entry(ek, MethodHandleEntry::finish_compiled_entry(_masm, me_cookie));

 }