Wed, 17 Feb 2016 13:40:12 +0300
8081778: Use Intel x64 CPU instructions for RSA acceleration
Summary: Add intrinsics for BigInteger squareToLen and mulAdd methods.
Reviewed-by: kvn, jrose
1 /*
2 * Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/macroAssembler.hpp"
27 #include "asm/macroAssembler.inline.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "nativeInst_x86.hpp"
30 #include "oops/instanceOop.hpp"
31 #include "oops/method.hpp"
32 #include "oops/objArrayKlass.hpp"
33 #include "oops/oop.inline.hpp"
34 #include "prims/methodHandles.hpp"
35 #include "runtime/frame.inline.hpp"
36 #include "runtime/handles.inline.hpp"
37 #include "runtime/sharedRuntime.hpp"
38 #include "runtime/stubCodeGenerator.hpp"
39 #include "runtime/stubRoutines.hpp"
40 #include "runtime/thread.inline.hpp"
41 #include "utilities/top.hpp"
42 #ifdef COMPILER2
43 #include "opto/runtime.hpp"
44 #endif
46 // Declaration and definition of StubGenerator (no .hpp file).
47 // For a more detailed description of the stub routine structure
48 // see the comment in stubRoutines.hpp
50 #define __ _masm->
51 #define TIMES_OOP (UseCompressedOops ? Address::times_4 : Address::times_8)
52 #define a__ ((Assembler*)_masm)->
54 #ifdef PRODUCT
55 #define BLOCK_COMMENT(str) /* nothing */
56 #else
57 #define BLOCK_COMMENT(str) __ block_comment(str)
58 #endif
60 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":")
61 const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions
63 // Stub Code definitions
65 static address handle_unsafe_access() {
66 JavaThread* thread = JavaThread::current();
67 address pc = thread->saved_exception_pc();
68 // pc is the instruction which we must emulate
69 // doing a no-op is fine: return garbage from the load
70 // therefore, compute npc
71 address npc = Assembler::locate_next_instruction(pc);
73 // request an async exception
74 thread->set_pending_unsafe_access_error();
76 // return address of next instruction to execute
77 return npc;
78 }
80 class StubGenerator: public StubCodeGenerator {
81 private:
83 #ifdef PRODUCT
84 #define inc_counter_np(counter) ((void)0)
85 #else
86 void inc_counter_np_(int& counter) {
87 // This can destroy rscratch1 if counter is far from the code cache
88 __ incrementl(ExternalAddress((address)&counter));
89 }
90 #define inc_counter_np(counter) \
91 BLOCK_COMMENT("inc_counter " #counter); \
92 inc_counter_np_(counter);
93 #endif
95 // Call stubs are used to call Java from C
96 //
97 // Linux Arguments:
98 // c_rarg0: call wrapper address address
99 // c_rarg1: result address
100 // c_rarg2: result type BasicType
101 // c_rarg3: method Method*
102 // c_rarg4: (interpreter) entry point address
103 // c_rarg5: parameters intptr_t*
104 // 16(rbp): parameter size (in words) int
105 // 24(rbp): thread Thread*
106 //
107 // [ return_from_Java ] <--- rsp
108 // [ argument word n ]
109 // ...
110 // -12 [ argument word 1 ]
111 // -11 [ saved r15 ] <--- rsp_after_call
112 // -10 [ saved r14 ]
113 // -9 [ saved r13 ]
114 // -8 [ saved r12 ]
115 // -7 [ saved rbx ]
116 // -6 [ call wrapper ]
117 // -5 [ result ]
118 // -4 [ result type ]
119 // -3 [ method ]
120 // -2 [ entry point ]
121 // -1 [ parameters ]
122 // 0 [ saved rbp ] <--- rbp
123 // 1 [ return address ]
124 // 2 [ parameter size ]
125 // 3 [ thread ]
126 //
127 // Windows Arguments:
128 // c_rarg0: call wrapper address address
129 // c_rarg1: result address
130 // c_rarg2: result type BasicType
131 // c_rarg3: method Method*
132 // 48(rbp): (interpreter) entry point address
133 // 56(rbp): parameters intptr_t*
134 // 64(rbp): parameter size (in words) int
135 // 72(rbp): thread Thread*
136 //
137 // [ return_from_Java ] <--- rsp
138 // [ argument word n ]
139 // ...
140 // -28 [ argument word 1 ]
141 // -27 [ saved xmm15 ] <--- rsp_after_call
142 // [ saved xmm7-xmm14 ]
143 // -9 [ saved xmm6 ] (each xmm register takes 2 slots)
144 // -7 [ saved r15 ]
145 // -6 [ saved r14 ]
146 // -5 [ saved r13 ]
147 // -4 [ saved r12 ]
148 // -3 [ saved rdi ]
149 // -2 [ saved rsi ]
150 // -1 [ saved rbx ]
151 // 0 [ saved rbp ] <--- rbp
152 // 1 [ return address ]
153 // 2 [ call wrapper ]
154 // 3 [ result ]
155 // 4 [ result type ]
156 // 5 [ method ]
157 // 6 [ entry point ]
158 // 7 [ parameters ]
159 // 8 [ parameter size ]
160 // 9 [ thread ]
161 //
162 // Windows reserves the callers stack space for arguments 1-4.
163 // We spill c_rarg0-c_rarg3 to this space.
165 // Call stub stack layout word offsets from rbp
166 enum call_stub_layout {
167 #ifdef _WIN64
168 xmm_save_first = 6, // save from xmm6
169 xmm_save_last = 15, // to xmm15
170 xmm_save_base = -9,
171 rsp_after_call_off = xmm_save_base - 2 * (xmm_save_last - xmm_save_first), // -27
172 r15_off = -7,
173 r14_off = -6,
174 r13_off = -5,
175 r12_off = -4,
176 rdi_off = -3,
177 rsi_off = -2,
178 rbx_off = -1,
179 rbp_off = 0,
180 retaddr_off = 1,
181 call_wrapper_off = 2,
182 result_off = 3,
183 result_type_off = 4,
184 method_off = 5,
185 entry_point_off = 6,
186 parameters_off = 7,
187 parameter_size_off = 8,
188 thread_off = 9
189 #else
190 rsp_after_call_off = -12,
191 mxcsr_off = rsp_after_call_off,
192 r15_off = -11,
193 r14_off = -10,
194 r13_off = -9,
195 r12_off = -8,
196 rbx_off = -7,
197 call_wrapper_off = -6,
198 result_off = -5,
199 result_type_off = -4,
200 method_off = -3,
201 entry_point_off = -2,
202 parameters_off = -1,
203 rbp_off = 0,
204 retaddr_off = 1,
205 parameter_size_off = 2,
206 thread_off = 3
207 #endif
208 };
210 #ifdef _WIN64
211 Address xmm_save(int reg) {
212 assert(reg >= xmm_save_first && reg <= xmm_save_last, "XMM register number out of range");
213 return Address(rbp, (xmm_save_base - (reg - xmm_save_first) * 2) * wordSize);
214 }
215 #endif
217 address generate_call_stub(address& return_address) {
218 assert((int)frame::entry_frame_after_call_words == -(int)rsp_after_call_off + 1 &&
219 (int)frame::entry_frame_call_wrapper_offset == (int)call_wrapper_off,
220 "adjust this code");
221 StubCodeMark mark(this, "StubRoutines", "call_stub");
222 address start = __ pc();
224 // same as in generate_catch_exception()!
225 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize);
227 const Address call_wrapper (rbp, call_wrapper_off * wordSize);
228 const Address result (rbp, result_off * wordSize);
229 const Address result_type (rbp, result_type_off * wordSize);
230 const Address method (rbp, method_off * wordSize);
231 const Address entry_point (rbp, entry_point_off * wordSize);
232 const Address parameters (rbp, parameters_off * wordSize);
233 const Address parameter_size(rbp, parameter_size_off * wordSize);
235 // same as in generate_catch_exception()!
236 const Address thread (rbp, thread_off * wordSize);
238 const Address r15_save(rbp, r15_off * wordSize);
239 const Address r14_save(rbp, r14_off * wordSize);
240 const Address r13_save(rbp, r13_off * wordSize);
241 const Address r12_save(rbp, r12_off * wordSize);
242 const Address rbx_save(rbp, rbx_off * wordSize);
244 // stub code
245 __ enter();
246 __ subptr(rsp, -rsp_after_call_off * wordSize);
248 // save register parameters
249 #ifndef _WIN64
250 __ movptr(parameters, c_rarg5); // parameters
251 __ movptr(entry_point, c_rarg4); // entry_point
252 #endif
254 __ movptr(method, c_rarg3); // method
255 __ movl(result_type, c_rarg2); // result type
256 __ movptr(result, c_rarg1); // result
257 __ movptr(call_wrapper, c_rarg0); // call wrapper
259 // save regs belonging to calling function
260 __ movptr(rbx_save, rbx);
261 __ movptr(r12_save, r12);
262 __ movptr(r13_save, r13);
263 __ movptr(r14_save, r14);
264 __ movptr(r15_save, r15);
265 #ifdef _WIN64
266 for (int i = 6; i <= 15; i++) {
267 __ movdqu(xmm_save(i), as_XMMRegister(i));
268 }
270 const Address rdi_save(rbp, rdi_off * wordSize);
271 const Address rsi_save(rbp, rsi_off * wordSize);
273 __ movptr(rsi_save, rsi);
274 __ movptr(rdi_save, rdi);
275 #else
276 const Address mxcsr_save(rbp, mxcsr_off * wordSize);
277 {
278 Label skip_ldmx;
279 __ stmxcsr(mxcsr_save);
280 __ movl(rax, mxcsr_save);
281 __ andl(rax, MXCSR_MASK); // Only check control and mask bits
282 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
283 __ cmp32(rax, mxcsr_std);
284 __ jcc(Assembler::equal, skip_ldmx);
285 __ ldmxcsr(mxcsr_std);
286 __ bind(skip_ldmx);
287 }
288 #endif
290 // Load up thread register
291 __ movptr(r15_thread, thread);
292 __ reinit_heapbase();
294 #ifdef ASSERT
295 // make sure we have no pending exceptions
296 {
297 Label L;
298 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
299 __ jcc(Assembler::equal, L);
300 __ stop("StubRoutines::call_stub: entered with pending exception");
301 __ bind(L);
302 }
303 #endif
305 // pass parameters if any
306 BLOCK_COMMENT("pass parameters if any");
307 Label parameters_done;
308 __ movl(c_rarg3, parameter_size);
309 __ testl(c_rarg3, c_rarg3);
310 __ jcc(Assembler::zero, parameters_done);
312 Label loop;
313 __ movptr(c_rarg2, parameters); // parameter pointer
314 __ movl(c_rarg1, c_rarg3); // parameter counter is in c_rarg1
315 __ BIND(loop);
316 __ movptr(rax, Address(c_rarg2, 0));// get parameter
317 __ addptr(c_rarg2, wordSize); // advance to next parameter
318 __ decrementl(c_rarg1); // decrement counter
319 __ push(rax); // pass parameter
320 __ jcc(Assembler::notZero, loop);
322 // call Java function
323 __ BIND(parameters_done);
324 __ movptr(rbx, method); // get Method*
325 __ movptr(c_rarg1, entry_point); // get entry_point
326 __ mov(r13, rsp); // set sender sp
327 BLOCK_COMMENT("call Java function");
328 __ call(c_rarg1);
330 BLOCK_COMMENT("call_stub_return_address:");
331 return_address = __ pc();
333 // store result depending on type (everything that is not
334 // T_OBJECT, T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT)
335 __ movptr(c_rarg0, result);
336 Label is_long, is_float, is_double, exit;
337 __ movl(c_rarg1, result_type);
338 __ cmpl(c_rarg1, T_OBJECT);
339 __ jcc(Assembler::equal, is_long);
340 __ cmpl(c_rarg1, T_LONG);
341 __ jcc(Assembler::equal, is_long);
342 __ cmpl(c_rarg1, T_FLOAT);
343 __ jcc(Assembler::equal, is_float);
344 __ cmpl(c_rarg1, T_DOUBLE);
345 __ jcc(Assembler::equal, is_double);
347 // handle T_INT case
348 __ movl(Address(c_rarg0, 0), rax);
350 __ BIND(exit);
352 // pop parameters
353 __ lea(rsp, rsp_after_call);
355 #ifdef ASSERT
356 // verify that threads correspond
357 {
358 Label L, S;
359 __ cmpptr(r15_thread, thread);
360 __ jcc(Assembler::notEqual, S);
361 __ get_thread(rbx);
362 __ cmpptr(r15_thread, rbx);
363 __ jcc(Assembler::equal, L);
364 __ bind(S);
365 __ jcc(Assembler::equal, L);
366 __ stop("StubRoutines::call_stub: threads must correspond");
367 __ bind(L);
368 }
369 #endif
371 // restore regs belonging to calling function
372 #ifdef _WIN64
373 for (int i = 15; i >= 6; i--) {
374 __ movdqu(as_XMMRegister(i), xmm_save(i));
375 }
376 #endif
377 __ movptr(r15, r15_save);
378 __ movptr(r14, r14_save);
379 __ movptr(r13, r13_save);
380 __ movptr(r12, r12_save);
381 __ movptr(rbx, rbx_save);
383 #ifdef _WIN64
384 __ movptr(rdi, rdi_save);
385 __ movptr(rsi, rsi_save);
386 #else
387 __ ldmxcsr(mxcsr_save);
388 #endif
390 // restore rsp
391 __ addptr(rsp, -rsp_after_call_off * wordSize);
393 // return
394 __ pop(rbp);
395 __ ret(0);
397 // handle return types different from T_INT
398 __ BIND(is_long);
399 __ movq(Address(c_rarg0, 0), rax);
400 __ jmp(exit);
402 __ BIND(is_float);
403 __ movflt(Address(c_rarg0, 0), xmm0);
404 __ jmp(exit);
406 __ BIND(is_double);
407 __ movdbl(Address(c_rarg0, 0), xmm0);
408 __ jmp(exit);
410 return start;
411 }
413 // Return point for a Java call if there's an exception thrown in
414 // Java code. The exception is caught and transformed into a
415 // pending exception stored in JavaThread that can be tested from
416 // within the VM.
417 //
418 // Note: Usually the parameters are removed by the callee. In case
419 // of an exception crossing an activation frame boundary, that is
420 // not the case if the callee is compiled code => need to setup the
421 // rsp.
422 //
423 // rax: exception oop
425 address generate_catch_exception() {
426 StubCodeMark mark(this, "StubRoutines", "catch_exception");
427 address start = __ pc();
429 // same as in generate_call_stub():
430 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize);
431 const Address thread (rbp, thread_off * wordSize);
433 #ifdef ASSERT
434 // verify that threads correspond
435 {
436 Label L, S;
437 __ cmpptr(r15_thread, thread);
438 __ jcc(Assembler::notEqual, S);
439 __ get_thread(rbx);
440 __ cmpptr(r15_thread, rbx);
441 __ jcc(Assembler::equal, L);
442 __ bind(S);
443 __ stop("StubRoutines::catch_exception: threads must correspond");
444 __ bind(L);
445 }
446 #endif
448 // set pending exception
449 __ verify_oop(rax);
451 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), rax);
452 __ lea(rscratch1, ExternalAddress((address)__FILE__));
453 __ movptr(Address(r15_thread, Thread::exception_file_offset()), rscratch1);
454 __ movl(Address(r15_thread, Thread::exception_line_offset()), (int) __LINE__);
456 // complete return to VM
457 assert(StubRoutines::_call_stub_return_address != NULL,
458 "_call_stub_return_address must have been generated before");
459 __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address));
461 return start;
462 }
464 // Continuation point for runtime calls returning with a pending
465 // exception. The pending exception check happened in the runtime
466 // or native call stub. The pending exception in Thread is
467 // converted into a Java-level exception.
468 //
469 // Contract with Java-level exception handlers:
470 // rax: exception
471 // rdx: throwing pc
472 //
473 // NOTE: At entry of this stub, exception-pc must be on stack !!
475 address generate_forward_exception() {
476 StubCodeMark mark(this, "StubRoutines", "forward exception");
477 address start = __ pc();
479 // Upon entry, the sp points to the return address returning into
480 // Java (interpreted or compiled) code; i.e., the return address
481 // becomes the throwing pc.
482 //
483 // Arguments pushed before the runtime call are still on the stack
484 // but the exception handler will reset the stack pointer ->
485 // ignore them. A potential result in registers can be ignored as
486 // well.
488 #ifdef ASSERT
489 // make sure this code is only executed if there is a pending exception
490 {
491 Label L;
492 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL);
493 __ jcc(Assembler::notEqual, L);
494 __ stop("StubRoutines::forward exception: no pending exception (1)");
495 __ bind(L);
496 }
497 #endif
499 // compute exception handler into rbx
500 __ movptr(c_rarg0, Address(rsp, 0));
501 BLOCK_COMMENT("call exception_handler_for_return_address");
502 __ call_VM_leaf(CAST_FROM_FN_PTR(address,
503 SharedRuntime::exception_handler_for_return_address),
504 r15_thread, c_rarg0);
505 __ mov(rbx, rax);
507 // setup rax & rdx, remove return address & clear pending exception
508 __ pop(rdx);
509 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
510 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
512 #ifdef ASSERT
513 // make sure exception is set
514 {
515 Label L;
516 __ testptr(rax, rax);
517 __ jcc(Assembler::notEqual, L);
518 __ stop("StubRoutines::forward exception: no pending exception (2)");
519 __ bind(L);
520 }
521 #endif
523 // continue at exception handler (return address removed)
524 // rax: exception
525 // rbx: exception handler
526 // rdx: throwing pc
527 __ verify_oop(rax);
528 __ jmp(rbx);
530 return start;
531 }
533 // Support for jint atomic::xchg(jint exchange_value, volatile jint* dest)
534 //
535 // Arguments :
536 // c_rarg0: exchange_value
537 // c_rarg0: dest
538 //
539 // Result:
540 // *dest <- ex, return (orig *dest)
541 address generate_atomic_xchg() {
542 StubCodeMark mark(this, "StubRoutines", "atomic_xchg");
543 address start = __ pc();
545 __ movl(rax, c_rarg0); // Copy to eax we need a return value anyhow
546 __ xchgl(rax, Address(c_rarg1, 0)); // automatic LOCK
547 __ ret(0);
549 return start;
550 }
552 // Support for intptr_t atomic::xchg_ptr(intptr_t exchange_value, volatile intptr_t* dest)
553 //
554 // Arguments :
555 // c_rarg0: exchange_value
556 // c_rarg1: dest
557 //
558 // Result:
559 // *dest <- ex, return (orig *dest)
560 address generate_atomic_xchg_ptr() {
561 StubCodeMark mark(this, "StubRoutines", "atomic_xchg_ptr");
562 address start = __ pc();
564 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow
565 __ xchgptr(rax, Address(c_rarg1, 0)); // automatic LOCK
566 __ ret(0);
568 return start;
569 }
571 // Support for jint atomic::atomic_cmpxchg(jint exchange_value, volatile jint* dest,
572 // jint compare_value)
573 //
574 // Arguments :
575 // c_rarg0: exchange_value
576 // c_rarg1: dest
577 // c_rarg2: compare_value
578 //
579 // Result:
580 // if ( compare_value == *dest ) {
581 // *dest = exchange_value
582 // return compare_value;
583 // else
584 // return *dest;
585 address generate_atomic_cmpxchg() {
586 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg");
587 address start = __ pc();
589 __ movl(rax, c_rarg2);
590 if ( os::is_MP() ) __ lock();
591 __ cmpxchgl(c_rarg0, Address(c_rarg1, 0));
592 __ ret(0);
594 return start;
595 }
597 // Support for jint atomic::atomic_cmpxchg_long(jlong exchange_value,
598 // volatile jlong* dest,
599 // jlong compare_value)
600 // Arguments :
601 // c_rarg0: exchange_value
602 // c_rarg1: dest
603 // c_rarg2: compare_value
604 //
605 // Result:
606 // if ( compare_value == *dest ) {
607 // *dest = exchange_value
608 // return compare_value;
609 // else
610 // return *dest;
611 address generate_atomic_cmpxchg_long() {
612 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long");
613 address start = __ pc();
615 __ movq(rax, c_rarg2);
616 if ( os::is_MP() ) __ lock();
617 __ cmpxchgq(c_rarg0, Address(c_rarg1, 0));
618 __ ret(0);
620 return start;
621 }
623 // Support for jint atomic::add(jint add_value, volatile jint* dest)
624 //
625 // Arguments :
626 // c_rarg0: add_value
627 // c_rarg1: dest
628 //
629 // Result:
630 // *dest += add_value
631 // return *dest;
632 address generate_atomic_add() {
633 StubCodeMark mark(this, "StubRoutines", "atomic_add");
634 address start = __ pc();
636 __ movl(rax, c_rarg0);
637 if ( os::is_MP() ) __ lock();
638 __ xaddl(Address(c_rarg1, 0), c_rarg0);
639 __ addl(rax, c_rarg0);
640 __ ret(0);
642 return start;
643 }
645 // Support for intptr_t atomic::add_ptr(intptr_t add_value, volatile intptr_t* dest)
646 //
647 // Arguments :
648 // c_rarg0: add_value
649 // c_rarg1: dest
650 //
651 // Result:
652 // *dest += add_value
653 // return *dest;
654 address generate_atomic_add_ptr() {
655 StubCodeMark mark(this, "StubRoutines", "atomic_add_ptr");
656 address start = __ pc();
658 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow
659 if ( os::is_MP() ) __ lock();
660 __ xaddptr(Address(c_rarg1, 0), c_rarg0);
661 __ addptr(rax, c_rarg0);
662 __ ret(0);
664 return start;
665 }
667 // Support for intptr_t OrderAccess::fence()
668 //
669 // Arguments :
670 //
671 // Result:
672 address generate_orderaccess_fence() {
673 StubCodeMark mark(this, "StubRoutines", "orderaccess_fence");
674 address start = __ pc();
675 __ membar(Assembler::StoreLoad);
676 __ ret(0);
678 return start;
679 }
681 // Support for intptr_t get_previous_fp()
682 //
683 // This routine is used to find the previous frame pointer for the
684 // caller (current_frame_guess). This is used as part of debugging
685 // ps() is seemingly lost trying to find frames.
686 // This code assumes that caller current_frame_guess) has a frame.
687 address generate_get_previous_fp() {
688 StubCodeMark mark(this, "StubRoutines", "get_previous_fp");
689 const Address old_fp(rbp, 0);
690 const Address older_fp(rax, 0);
691 address start = __ pc();
693 __ enter();
694 __ movptr(rax, old_fp); // callers fp
695 __ movptr(rax, older_fp); // the frame for ps()
696 __ pop(rbp);
697 __ ret(0);
699 return start;
700 }
702 // Support for intptr_t get_previous_sp()
703 //
704 // This routine is used to find the previous stack pointer for the
705 // caller.
706 address generate_get_previous_sp() {
707 StubCodeMark mark(this, "StubRoutines", "get_previous_sp");
708 address start = __ pc();
710 __ movptr(rax, rsp);
711 __ addptr(rax, 8); // return address is at the top of the stack.
712 __ ret(0);
714 return start;
715 }
717 //----------------------------------------------------------------------------------------------------
718 // Support for void verify_mxcsr()
719 //
720 // This routine is used with -Xcheck:jni to verify that native
721 // JNI code does not return to Java code without restoring the
722 // MXCSR register to our expected state.
724 address generate_verify_mxcsr() {
725 StubCodeMark mark(this, "StubRoutines", "verify_mxcsr");
726 address start = __ pc();
728 const Address mxcsr_save(rsp, 0);
730 if (CheckJNICalls) {
731 Label ok_ret;
732 ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
733 __ push(rax);
734 __ subptr(rsp, wordSize); // allocate a temp location
735 __ stmxcsr(mxcsr_save);
736 __ movl(rax, mxcsr_save);
737 __ andl(rax, MXCSR_MASK); // Only check control and mask bits
738 __ cmp32(rax, mxcsr_std);
739 __ jcc(Assembler::equal, ok_ret);
741 __ warn("MXCSR changed by native JNI code, use -XX:+RestoreMXCSROnJNICall");
743 __ ldmxcsr(mxcsr_std);
745 __ bind(ok_ret);
746 __ addptr(rsp, wordSize);
747 __ pop(rax);
748 }
750 __ ret(0);
752 return start;
753 }
755 address generate_f2i_fixup() {
756 StubCodeMark mark(this, "StubRoutines", "f2i_fixup");
757 Address inout(rsp, 5 * wordSize); // return address + 4 saves
759 address start = __ pc();
761 Label L;
763 __ push(rax);
764 __ push(c_rarg3);
765 __ push(c_rarg2);
766 __ push(c_rarg1);
768 __ movl(rax, 0x7f800000);
769 __ xorl(c_rarg3, c_rarg3);
770 __ movl(c_rarg2, inout);
771 __ movl(c_rarg1, c_rarg2);
772 __ andl(c_rarg1, 0x7fffffff);
773 __ cmpl(rax, c_rarg1); // NaN? -> 0
774 __ jcc(Assembler::negative, L);
775 __ testl(c_rarg2, c_rarg2); // signed ? min_jint : max_jint
776 __ movl(c_rarg3, 0x80000000);
777 __ movl(rax, 0x7fffffff);
778 __ cmovl(Assembler::positive, c_rarg3, rax);
780 __ bind(L);
781 __ movptr(inout, c_rarg3);
783 __ pop(c_rarg1);
784 __ pop(c_rarg2);
785 __ pop(c_rarg3);
786 __ pop(rax);
788 __ ret(0);
790 return start;
791 }
793 address generate_f2l_fixup() {
794 StubCodeMark mark(this, "StubRoutines", "f2l_fixup");
795 Address inout(rsp, 5 * wordSize); // return address + 4 saves
796 address start = __ pc();
798 Label L;
800 __ push(rax);
801 __ push(c_rarg3);
802 __ push(c_rarg2);
803 __ push(c_rarg1);
805 __ movl(rax, 0x7f800000);
806 __ xorl(c_rarg3, c_rarg3);
807 __ movl(c_rarg2, inout);
808 __ movl(c_rarg1, c_rarg2);
809 __ andl(c_rarg1, 0x7fffffff);
810 __ cmpl(rax, c_rarg1); // NaN? -> 0
811 __ jcc(Assembler::negative, L);
812 __ testl(c_rarg2, c_rarg2); // signed ? min_jlong : max_jlong
813 __ mov64(c_rarg3, 0x8000000000000000);
814 __ mov64(rax, 0x7fffffffffffffff);
815 __ cmov(Assembler::positive, c_rarg3, rax);
817 __ bind(L);
818 __ movptr(inout, c_rarg3);
820 __ pop(c_rarg1);
821 __ pop(c_rarg2);
822 __ pop(c_rarg3);
823 __ pop(rax);
825 __ ret(0);
827 return start;
828 }
830 address generate_d2i_fixup() {
831 StubCodeMark mark(this, "StubRoutines", "d2i_fixup");
832 Address inout(rsp, 6 * wordSize); // return address + 5 saves
834 address start = __ pc();
836 Label L;
838 __ push(rax);
839 __ push(c_rarg3);
840 __ push(c_rarg2);
841 __ push(c_rarg1);
842 __ push(c_rarg0);
844 __ movl(rax, 0x7ff00000);
845 __ movq(c_rarg2, inout);
846 __ movl(c_rarg3, c_rarg2);
847 __ mov(c_rarg1, c_rarg2);
848 __ mov(c_rarg0, c_rarg2);
849 __ negl(c_rarg3);
850 __ shrptr(c_rarg1, 0x20);
851 __ orl(c_rarg3, c_rarg2);
852 __ andl(c_rarg1, 0x7fffffff);
853 __ xorl(c_rarg2, c_rarg2);
854 __ shrl(c_rarg3, 0x1f);
855 __ orl(c_rarg1, c_rarg3);
856 __ cmpl(rax, c_rarg1);
857 __ jcc(Assembler::negative, L); // NaN -> 0
858 __ testptr(c_rarg0, c_rarg0); // signed ? min_jint : max_jint
859 __ movl(c_rarg2, 0x80000000);
860 __ movl(rax, 0x7fffffff);
861 __ cmov(Assembler::positive, c_rarg2, rax);
863 __ bind(L);
864 __ movptr(inout, c_rarg2);
866 __ pop(c_rarg0);
867 __ pop(c_rarg1);
868 __ pop(c_rarg2);
869 __ pop(c_rarg3);
870 __ pop(rax);
872 __ ret(0);
874 return start;
875 }
877 address generate_d2l_fixup() {
878 StubCodeMark mark(this, "StubRoutines", "d2l_fixup");
879 Address inout(rsp, 6 * wordSize); // return address + 5 saves
881 address start = __ pc();
883 Label L;
885 __ push(rax);
886 __ push(c_rarg3);
887 __ push(c_rarg2);
888 __ push(c_rarg1);
889 __ push(c_rarg0);
891 __ movl(rax, 0x7ff00000);
892 __ movq(c_rarg2, inout);
893 __ movl(c_rarg3, c_rarg2);
894 __ mov(c_rarg1, c_rarg2);
895 __ mov(c_rarg0, c_rarg2);
896 __ negl(c_rarg3);
897 __ shrptr(c_rarg1, 0x20);
898 __ orl(c_rarg3, c_rarg2);
899 __ andl(c_rarg1, 0x7fffffff);
900 __ xorl(c_rarg2, c_rarg2);
901 __ shrl(c_rarg3, 0x1f);
902 __ orl(c_rarg1, c_rarg3);
903 __ cmpl(rax, c_rarg1);
904 __ jcc(Assembler::negative, L); // NaN -> 0
905 __ testq(c_rarg0, c_rarg0); // signed ? min_jlong : max_jlong
906 __ mov64(c_rarg2, 0x8000000000000000);
907 __ mov64(rax, 0x7fffffffffffffff);
908 __ cmovq(Assembler::positive, c_rarg2, rax);
910 __ bind(L);
911 __ movq(inout, c_rarg2);
913 __ pop(c_rarg0);
914 __ pop(c_rarg1);
915 __ pop(c_rarg2);
916 __ pop(c_rarg3);
917 __ pop(rax);
919 __ ret(0);
921 return start;
922 }
924 address generate_fp_mask(const char *stub_name, int64_t mask) {
925 __ align(CodeEntryAlignment);
926 StubCodeMark mark(this, "StubRoutines", stub_name);
927 address start = __ pc();
929 __ emit_data64( mask, relocInfo::none );
930 __ emit_data64( mask, relocInfo::none );
932 return start;
933 }
935 // The following routine generates a subroutine to throw an
936 // asynchronous UnknownError when an unsafe access gets a fault that
937 // could not be reasonably prevented by the programmer. (Example:
938 // SIGBUS/OBJERR.)
939 address generate_handler_for_unsafe_access() {
940 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access");
941 address start = __ pc();
943 __ push(0); // hole for return address-to-be
944 __ pusha(); // push registers
945 Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord);
947 // FIXME: this probably needs alignment logic
949 __ subptr(rsp, frame::arg_reg_save_area_bytes);
950 BLOCK_COMMENT("call handle_unsafe_access");
951 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access)));
952 __ addptr(rsp, frame::arg_reg_save_area_bytes);
954 __ movptr(next_pc, rax); // stuff next address
955 __ popa();
956 __ ret(0); // jump to next address
958 return start;
959 }
961 // Non-destructive plausibility checks for oops
962 //
963 // Arguments:
964 // all args on stack!
965 //
966 // Stack after saving c_rarg3:
967 // [tos + 0]: saved c_rarg3
968 // [tos + 1]: saved c_rarg2
969 // [tos + 2]: saved r12 (several TemplateTable methods use it)
970 // [tos + 3]: saved flags
971 // [tos + 4]: return address
972 // * [tos + 5]: error message (char*)
973 // * [tos + 6]: object to verify (oop)
974 // * [tos + 7]: saved rax - saved by caller and bashed
975 // * [tos + 8]: saved r10 (rscratch1) - saved by caller
976 // * = popped on exit
977 address generate_verify_oop() {
978 StubCodeMark mark(this, "StubRoutines", "verify_oop");
979 address start = __ pc();
981 Label exit, error;
983 __ pushf();
984 __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr()));
986 __ push(r12);
988 // save c_rarg2 and c_rarg3
989 __ push(c_rarg2);
990 __ push(c_rarg3);
992 enum {
993 // After previous pushes.
994 oop_to_verify = 6 * wordSize,
995 saved_rax = 7 * wordSize,
996 saved_r10 = 8 * wordSize,
998 // Before the call to MacroAssembler::debug(), see below.
999 return_addr = 16 * wordSize,
1000 error_msg = 17 * wordSize
1001 };
1003 // get object
1004 __ movptr(rax, Address(rsp, oop_to_verify));
1006 // make sure object is 'reasonable'
1007 __ testptr(rax, rax);
1008 __ jcc(Assembler::zero, exit); // if obj is NULL it is OK
1009 // Check if the oop is in the right area of memory
1010 __ movptr(c_rarg2, rax);
1011 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_mask());
1012 __ andptr(c_rarg2, c_rarg3);
1013 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_bits());
1014 __ cmpptr(c_rarg2, c_rarg3);
1015 __ jcc(Assembler::notZero, error);
1017 // set r12 to heapbase for load_klass()
1018 __ reinit_heapbase();
1020 // make sure klass is 'reasonable', which is not zero.
1021 __ load_klass(rax, rax); // get klass
1022 __ testptr(rax, rax);
1023 __ jcc(Assembler::zero, error); // if klass is NULL it is broken
1025 // return if everything seems ok
1026 __ bind(exit);
1027 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back
1028 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back
1029 __ pop(c_rarg3); // restore c_rarg3
1030 __ pop(c_rarg2); // restore c_rarg2
1031 __ pop(r12); // restore r12
1032 __ popf(); // restore flags
1033 __ ret(4 * wordSize); // pop caller saved stuff
1035 // handle errors
1036 __ bind(error);
1037 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back
1038 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back
1039 __ pop(c_rarg3); // get saved c_rarg3 back
1040 __ pop(c_rarg2); // get saved c_rarg2 back
1041 __ pop(r12); // get saved r12 back
1042 __ popf(); // get saved flags off stack --
1043 // will be ignored
1045 __ pusha(); // push registers
1046 // (rip is already
1047 // already pushed)
1048 // debug(char* msg, int64_t pc, int64_t regs[])
1049 // We've popped the registers we'd saved (c_rarg3, c_rarg2 and flags), and
1050 // pushed all the registers, so now the stack looks like:
1051 // [tos + 0] 16 saved registers
1052 // [tos + 16] return address
1053 // * [tos + 17] error message (char*)
1054 // * [tos + 18] object to verify (oop)
1055 // * [tos + 19] saved rax - saved by caller and bashed
1056 // * [tos + 20] saved r10 (rscratch1) - saved by caller
1057 // * = popped on exit
1059 __ movptr(c_rarg0, Address(rsp, error_msg)); // pass address of error message
1060 __ movptr(c_rarg1, Address(rsp, return_addr)); // pass return address
1061 __ movq(c_rarg2, rsp); // pass address of regs on stack
1062 __ mov(r12, rsp); // remember rsp
1063 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1064 __ andptr(rsp, -16); // align stack as required by ABI
1065 BLOCK_COMMENT("call MacroAssembler::debug");
1066 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug64)));
1067 __ mov(rsp, r12); // restore rsp
1068 __ popa(); // pop registers (includes r12)
1069 __ ret(4 * wordSize); // pop caller saved stuff
1071 return start;
1072 }
1074 //
1075 // Verify that a register contains clean 32-bits positive value
1076 // (high 32-bits are 0) so it could be used in 64-bits shifts.
1077 //
1078 // Input:
1079 // Rint - 32-bits value
1080 // Rtmp - scratch
1081 //
1082 void assert_clean_int(Register Rint, Register Rtmp) {
1083 #ifdef ASSERT
1084 Label L;
1085 assert_different_registers(Rtmp, Rint);
1086 __ movslq(Rtmp, Rint);
1087 __ cmpq(Rtmp, Rint);
1088 __ jcc(Assembler::equal, L);
1089 __ stop("high 32-bits of int value are not 0");
1090 __ bind(L);
1091 #endif
1092 }
1094 // Generate overlap test for array copy stubs
1095 //
1096 // Input:
1097 // c_rarg0 - from
1098 // c_rarg1 - to
1099 // c_rarg2 - element count
1100 //
1101 // Output:
1102 // rax - &from[element count - 1]
1103 //
1104 void array_overlap_test(address no_overlap_target, Address::ScaleFactor sf) {
1105 assert(no_overlap_target != NULL, "must be generated");
1106 array_overlap_test(no_overlap_target, NULL, sf);
1107 }
1108 void array_overlap_test(Label& L_no_overlap, Address::ScaleFactor sf) {
1109 array_overlap_test(NULL, &L_no_overlap, sf);
1110 }
1111 void array_overlap_test(address no_overlap_target, Label* NOLp, Address::ScaleFactor sf) {
1112 const Register from = c_rarg0;
1113 const Register to = c_rarg1;
1114 const Register count = c_rarg2;
1115 const Register end_from = rax;
1117 __ cmpptr(to, from);
1118 __ lea(end_from, Address(from, count, sf, 0));
1119 if (NOLp == NULL) {
1120 ExternalAddress no_overlap(no_overlap_target);
1121 __ jump_cc(Assembler::belowEqual, no_overlap);
1122 __ cmpptr(to, end_from);
1123 __ jump_cc(Assembler::aboveEqual, no_overlap);
1124 } else {
1125 __ jcc(Assembler::belowEqual, (*NOLp));
1126 __ cmpptr(to, end_from);
1127 __ jcc(Assembler::aboveEqual, (*NOLp));
1128 }
1129 }
1131 // Shuffle first three arg regs on Windows into Linux/Solaris locations.
1132 //
1133 // Outputs:
1134 // rdi - rcx
1135 // rsi - rdx
1136 // rdx - r8
1137 // rcx - r9
1138 //
1139 // Registers r9 and r10 are used to save rdi and rsi on Windows, which latter
1140 // are non-volatile. r9 and r10 should not be used by the caller.
1141 //
1142 void setup_arg_regs(int nargs = 3) {
1143 const Register saved_rdi = r9;
1144 const Register saved_rsi = r10;
1145 assert(nargs == 3 || nargs == 4, "else fix");
1146 #ifdef _WIN64
1147 assert(c_rarg0 == rcx && c_rarg1 == rdx && c_rarg2 == r8 && c_rarg3 == r9,
1148 "unexpected argument registers");
1149 if (nargs >= 4)
1150 __ mov(rax, r9); // r9 is also saved_rdi
1151 __ movptr(saved_rdi, rdi);
1152 __ movptr(saved_rsi, rsi);
1153 __ mov(rdi, rcx); // c_rarg0
1154 __ mov(rsi, rdx); // c_rarg1
1155 __ mov(rdx, r8); // c_rarg2
1156 if (nargs >= 4)
1157 __ mov(rcx, rax); // c_rarg3 (via rax)
1158 #else
1159 assert(c_rarg0 == rdi && c_rarg1 == rsi && c_rarg2 == rdx && c_rarg3 == rcx,
1160 "unexpected argument registers");
1161 #endif
1162 }
1164 void restore_arg_regs() {
1165 const Register saved_rdi = r9;
1166 const Register saved_rsi = r10;
1167 #ifdef _WIN64
1168 __ movptr(rdi, saved_rdi);
1169 __ movptr(rsi, saved_rsi);
1170 #endif
1171 }
1173 // Generate code for an array write pre barrier
1174 //
1175 // addr - starting address
1176 // count - element count
1177 // tmp - scratch register
1178 //
1179 // Destroy no registers!
1180 //
1181 void gen_write_ref_array_pre_barrier(Register addr, Register count, bool dest_uninitialized) {
1182 BarrierSet* bs = Universe::heap()->barrier_set();
1183 switch (bs->kind()) {
1184 case BarrierSet::G1SATBCT:
1185 case BarrierSet::G1SATBCTLogging:
1186 // With G1, don't generate the call if we statically know that the target in uninitialized
1187 if (!dest_uninitialized) {
1188 __ pusha(); // push registers
1189 if (count == c_rarg0) {
1190 if (addr == c_rarg1) {
1191 // exactly backwards!!
1192 __ xchgptr(c_rarg1, c_rarg0);
1193 } else {
1194 __ movptr(c_rarg1, count);
1195 __ movptr(c_rarg0, addr);
1196 }
1197 } else {
1198 __ movptr(c_rarg0, addr);
1199 __ movptr(c_rarg1, count);
1200 }
1201 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre), 2);
1202 __ popa();
1203 }
1204 break;
1205 case BarrierSet::CardTableModRef:
1206 case BarrierSet::CardTableExtension:
1207 case BarrierSet::ModRef:
1208 break;
1209 default:
1210 ShouldNotReachHere();
1212 }
1213 }
1215 //
1216 // Generate code for an array write post barrier
1217 //
1218 // Input:
1219 // start - register containing starting address of destination array
1220 // count - elements count
1221 // scratch - scratch register
1222 //
1223 // The input registers are overwritten.
1224 //
1225 void gen_write_ref_array_post_barrier(Register start, Register count, Register scratch) {
1226 assert_different_registers(start, count, scratch);
1227 BarrierSet* bs = Universe::heap()->barrier_set();
1228 switch (bs->kind()) {
1229 case BarrierSet::G1SATBCT:
1230 case BarrierSet::G1SATBCTLogging:
1231 {
1232 __ pusha(); // push registers (overkill)
1233 if (c_rarg0 == count) { // On win64 c_rarg0 == rcx
1234 assert_different_registers(c_rarg1, start);
1235 __ mov(c_rarg1, count);
1236 __ mov(c_rarg0, start);
1237 } else {
1238 assert_different_registers(c_rarg0, count);
1239 __ mov(c_rarg0, start);
1240 __ mov(c_rarg1, count);
1241 }
1242 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post), 2);
1243 __ popa();
1244 }
1245 break;
1246 case BarrierSet::CardTableModRef:
1247 case BarrierSet::CardTableExtension:
1248 {
1249 CardTableModRefBS* ct = (CardTableModRefBS*)bs;
1250 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code");
1252 Label L_loop;
1253 const Register end = count;
1255 __ leaq(end, Address(start, count, TIMES_OOP, 0)); // end == start+count*oop_size
1256 __ subptr(end, BytesPerHeapOop); // end - 1 to make inclusive
1257 __ shrptr(start, CardTableModRefBS::card_shift);
1258 __ shrptr(end, CardTableModRefBS::card_shift);
1259 __ subptr(end, start); // end --> cards count
1261 int64_t disp = (int64_t) ct->byte_map_base;
1262 __ mov64(scratch, disp);
1263 __ addptr(start, scratch);
1264 __ BIND(L_loop);
1265 __ movb(Address(start, count, Address::times_1), 0);
1266 __ decrement(count);
1267 __ jcc(Assembler::greaterEqual, L_loop);
1268 }
1269 break;
1270 default:
1271 ShouldNotReachHere();
1273 }
1274 }
1277 // Copy big chunks forward
1278 //
1279 // Inputs:
1280 // end_from - source arrays end address
1281 // end_to - destination array end address
1282 // qword_count - 64-bits element count, negative
1283 // to - scratch
1284 // L_copy_bytes - entry label
1285 // L_copy_8_bytes - exit label
1286 //
1287 void copy_bytes_forward(Register end_from, Register end_to,
1288 Register qword_count, Register to,
1289 Label& L_copy_bytes, Label& L_copy_8_bytes) {
1290 DEBUG_ONLY(__ stop("enter at entry label, not here"));
1291 Label L_loop;
1292 __ align(OptoLoopAlignment);
1293 if (UseUnalignedLoadStores) {
1294 Label L_end;
1295 // Copy 64-bytes per iteration
1296 __ BIND(L_loop);
1297 if (UseAVX >= 2) {
1298 __ vmovdqu(xmm0, Address(end_from, qword_count, Address::times_8, -56));
1299 __ vmovdqu(Address(end_to, qword_count, Address::times_8, -56), xmm0);
1300 __ vmovdqu(xmm1, Address(end_from, qword_count, Address::times_8, -24));
1301 __ vmovdqu(Address(end_to, qword_count, Address::times_8, -24), xmm1);
1302 } else {
1303 __ movdqu(xmm0, Address(end_from, qword_count, Address::times_8, -56));
1304 __ movdqu(Address(end_to, qword_count, Address::times_8, -56), xmm0);
1305 __ movdqu(xmm1, Address(end_from, qword_count, Address::times_8, -40));
1306 __ movdqu(Address(end_to, qword_count, Address::times_8, -40), xmm1);
1307 __ movdqu(xmm2, Address(end_from, qword_count, Address::times_8, -24));
1308 __ movdqu(Address(end_to, qword_count, Address::times_8, -24), xmm2);
1309 __ movdqu(xmm3, Address(end_from, qword_count, Address::times_8, - 8));
1310 __ movdqu(Address(end_to, qword_count, Address::times_8, - 8), xmm3);
1311 }
1312 __ BIND(L_copy_bytes);
1313 __ addptr(qword_count, 8);
1314 __ jcc(Assembler::lessEqual, L_loop);
1315 __ subptr(qword_count, 4); // sub(8) and add(4)
1316 __ jccb(Assembler::greater, L_end);
1317 // Copy trailing 32 bytes
1318 if (UseAVX >= 2) {
1319 __ vmovdqu(xmm0, Address(end_from, qword_count, Address::times_8, -24));
1320 __ vmovdqu(Address(end_to, qword_count, Address::times_8, -24), xmm0);
1321 } else {
1322 __ movdqu(xmm0, Address(end_from, qword_count, Address::times_8, -24));
1323 __ movdqu(Address(end_to, qword_count, Address::times_8, -24), xmm0);
1324 __ movdqu(xmm1, Address(end_from, qword_count, Address::times_8, - 8));
1325 __ movdqu(Address(end_to, qword_count, Address::times_8, - 8), xmm1);
1326 }
1327 __ addptr(qword_count, 4);
1328 __ BIND(L_end);
1329 if (UseAVX >= 2) {
1330 // clean upper bits of YMM registers
1331 __ vpxor(xmm0, xmm0);
1332 __ vpxor(xmm1, xmm1);
1333 }
1334 } else {
1335 // Copy 32-bytes per iteration
1336 __ BIND(L_loop);
1337 __ movq(to, Address(end_from, qword_count, Address::times_8, -24));
1338 __ movq(Address(end_to, qword_count, Address::times_8, -24), to);
1339 __ movq(to, Address(end_from, qword_count, Address::times_8, -16));
1340 __ movq(Address(end_to, qword_count, Address::times_8, -16), to);
1341 __ movq(to, Address(end_from, qword_count, Address::times_8, - 8));
1342 __ movq(Address(end_to, qword_count, Address::times_8, - 8), to);
1343 __ movq(to, Address(end_from, qword_count, Address::times_8, - 0));
1344 __ movq(Address(end_to, qword_count, Address::times_8, - 0), to);
1346 __ BIND(L_copy_bytes);
1347 __ addptr(qword_count, 4);
1348 __ jcc(Assembler::lessEqual, L_loop);
1349 }
1350 __ subptr(qword_count, 4);
1351 __ jcc(Assembler::less, L_copy_8_bytes); // Copy trailing qwords
1352 }
1354 // Copy big chunks backward
1355 //
1356 // Inputs:
1357 // from - source arrays address
1358 // dest - destination array address
1359 // qword_count - 64-bits element count
1360 // to - scratch
1361 // L_copy_bytes - entry label
1362 // L_copy_8_bytes - exit label
1363 //
1364 void copy_bytes_backward(Register from, Register dest,
1365 Register qword_count, Register to,
1366 Label& L_copy_bytes, Label& L_copy_8_bytes) {
1367 DEBUG_ONLY(__ stop("enter at entry label, not here"));
1368 Label L_loop;
1369 __ align(OptoLoopAlignment);
1370 if (UseUnalignedLoadStores) {
1371 Label L_end;
1372 // Copy 64-bytes per iteration
1373 __ BIND(L_loop);
1374 if (UseAVX >= 2) {
1375 __ vmovdqu(xmm0, Address(from, qword_count, Address::times_8, 32));
1376 __ vmovdqu(Address(dest, qword_count, Address::times_8, 32), xmm0);
1377 __ vmovdqu(xmm1, Address(from, qword_count, Address::times_8, 0));
1378 __ vmovdqu(Address(dest, qword_count, Address::times_8, 0), xmm1);
1379 } else {
1380 __ movdqu(xmm0, Address(from, qword_count, Address::times_8, 48));
1381 __ movdqu(Address(dest, qword_count, Address::times_8, 48), xmm0);
1382 __ movdqu(xmm1, Address(from, qword_count, Address::times_8, 32));
1383 __ movdqu(Address(dest, qword_count, Address::times_8, 32), xmm1);
1384 __ movdqu(xmm2, Address(from, qword_count, Address::times_8, 16));
1385 __ movdqu(Address(dest, qword_count, Address::times_8, 16), xmm2);
1386 __ movdqu(xmm3, Address(from, qword_count, Address::times_8, 0));
1387 __ movdqu(Address(dest, qword_count, Address::times_8, 0), xmm3);
1388 }
1389 __ BIND(L_copy_bytes);
1390 __ subptr(qword_count, 8);
1391 __ jcc(Assembler::greaterEqual, L_loop);
1393 __ addptr(qword_count, 4); // add(8) and sub(4)
1394 __ jccb(Assembler::less, L_end);
1395 // Copy trailing 32 bytes
1396 if (UseAVX >= 2) {
1397 __ vmovdqu(xmm0, Address(from, qword_count, Address::times_8, 0));
1398 __ vmovdqu(Address(dest, qword_count, Address::times_8, 0), xmm0);
1399 } else {
1400 __ movdqu(xmm0, Address(from, qword_count, Address::times_8, 16));
1401 __ movdqu(Address(dest, qword_count, Address::times_8, 16), xmm0);
1402 __ movdqu(xmm1, Address(from, qword_count, Address::times_8, 0));
1403 __ movdqu(Address(dest, qword_count, Address::times_8, 0), xmm1);
1404 }
1405 __ subptr(qword_count, 4);
1406 __ BIND(L_end);
1407 if (UseAVX >= 2) {
1408 // clean upper bits of YMM registers
1409 __ vpxor(xmm0, xmm0);
1410 __ vpxor(xmm1, xmm1);
1411 }
1412 } else {
1413 // Copy 32-bytes per iteration
1414 __ BIND(L_loop);
1415 __ movq(to, Address(from, qword_count, Address::times_8, 24));
1416 __ movq(Address(dest, qword_count, Address::times_8, 24), to);
1417 __ movq(to, Address(from, qword_count, Address::times_8, 16));
1418 __ movq(Address(dest, qword_count, Address::times_8, 16), to);
1419 __ movq(to, Address(from, qword_count, Address::times_8, 8));
1420 __ movq(Address(dest, qword_count, Address::times_8, 8), to);
1421 __ movq(to, Address(from, qword_count, Address::times_8, 0));
1422 __ movq(Address(dest, qword_count, Address::times_8, 0), to);
1424 __ BIND(L_copy_bytes);
1425 __ subptr(qword_count, 4);
1426 __ jcc(Assembler::greaterEqual, L_loop);
1427 }
1428 __ addptr(qword_count, 4);
1429 __ jcc(Assembler::greater, L_copy_8_bytes); // Copy trailing qwords
1430 }
1433 // Arguments:
1434 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1435 // ignored
1436 // name - stub name string
1437 //
1438 // Inputs:
1439 // c_rarg0 - source array address
1440 // c_rarg1 - destination array address
1441 // c_rarg2 - element count, treated as ssize_t, can be zero
1442 //
1443 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries,
1444 // we let the hardware handle it. The one to eight bytes within words,
1445 // dwords or qwords that span cache line boundaries will still be loaded
1446 // and stored atomically.
1447 //
1448 // Side Effects:
1449 // disjoint_byte_copy_entry is set to the no-overlap entry point
1450 // used by generate_conjoint_byte_copy().
1451 //
1452 address generate_disjoint_byte_copy(bool aligned, address* entry, const char *name) {
1453 __ align(CodeEntryAlignment);
1454 StubCodeMark mark(this, "StubRoutines", name);
1455 address start = __ pc();
1457 Label L_copy_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes;
1458 Label L_copy_byte, L_exit;
1459 const Register from = rdi; // source array address
1460 const Register to = rsi; // destination array address
1461 const Register count = rdx; // elements count
1462 const Register byte_count = rcx;
1463 const Register qword_count = count;
1464 const Register end_from = from; // source array end address
1465 const Register end_to = to; // destination array end address
1466 // End pointers are inclusive, and if count is not zero they point
1467 // to the last unit copied: end_to[0] := end_from[0]
1469 __ enter(); // required for proper stackwalking of RuntimeStub frame
1470 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1472 if (entry != NULL) {
1473 *entry = __ pc();
1474 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1475 BLOCK_COMMENT("Entry:");
1476 }
1478 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1479 // r9 and r10 may be used to save non-volatile registers
1481 // 'from', 'to' and 'count' are now valid
1482 __ movptr(byte_count, count);
1483 __ shrptr(count, 3); // count => qword_count
1485 // Copy from low to high addresses. Use 'to' as scratch.
1486 __ lea(end_from, Address(from, qword_count, Address::times_8, -8));
1487 __ lea(end_to, Address(to, qword_count, Address::times_8, -8));
1488 __ negptr(qword_count); // make the count negative
1489 __ jmp(L_copy_bytes);
1491 // Copy trailing qwords
1492 __ BIND(L_copy_8_bytes);
1493 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8));
1494 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax);
1495 __ increment(qword_count);
1496 __ jcc(Assembler::notZero, L_copy_8_bytes);
1498 // Check for and copy trailing dword
1499 __ BIND(L_copy_4_bytes);
1500 __ testl(byte_count, 4);
1501 __ jccb(Assembler::zero, L_copy_2_bytes);
1502 __ movl(rax, Address(end_from, 8));
1503 __ movl(Address(end_to, 8), rax);
1505 __ addptr(end_from, 4);
1506 __ addptr(end_to, 4);
1508 // Check for and copy trailing word
1509 __ BIND(L_copy_2_bytes);
1510 __ testl(byte_count, 2);
1511 __ jccb(Assembler::zero, L_copy_byte);
1512 __ movw(rax, Address(end_from, 8));
1513 __ movw(Address(end_to, 8), rax);
1515 __ addptr(end_from, 2);
1516 __ addptr(end_to, 2);
1518 // Check for and copy trailing byte
1519 __ BIND(L_copy_byte);
1520 __ testl(byte_count, 1);
1521 __ jccb(Assembler::zero, L_exit);
1522 __ movb(rax, Address(end_from, 8));
1523 __ movb(Address(end_to, 8), rax);
1525 __ BIND(L_exit);
1526 restore_arg_regs();
1527 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free
1528 __ xorptr(rax, rax); // return 0
1529 __ leave(); // required for proper stackwalking of RuntimeStub frame
1530 __ ret(0);
1532 // Copy in multi-bytes chunks
1533 copy_bytes_forward(end_from, end_to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
1534 __ jmp(L_copy_4_bytes);
1536 return start;
1537 }
1539 // Arguments:
1540 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1541 // ignored
1542 // name - stub name string
1543 //
1544 // Inputs:
1545 // c_rarg0 - source array address
1546 // c_rarg1 - destination array address
1547 // c_rarg2 - element count, treated as ssize_t, can be zero
1548 //
1549 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries,
1550 // we let the hardware handle it. The one to eight bytes within words,
1551 // dwords or qwords that span cache line boundaries will still be loaded
1552 // and stored atomically.
1553 //
1554 address generate_conjoint_byte_copy(bool aligned, address nooverlap_target,
1555 address* entry, const char *name) {
1556 __ align(CodeEntryAlignment);
1557 StubCodeMark mark(this, "StubRoutines", name);
1558 address start = __ pc();
1560 Label L_copy_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes;
1561 const Register from = rdi; // source array address
1562 const Register to = rsi; // destination array address
1563 const Register count = rdx; // elements count
1564 const Register byte_count = rcx;
1565 const Register qword_count = count;
1567 __ enter(); // required for proper stackwalking of RuntimeStub frame
1568 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1570 if (entry != NULL) {
1571 *entry = __ pc();
1572 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1573 BLOCK_COMMENT("Entry:");
1574 }
1576 array_overlap_test(nooverlap_target, Address::times_1);
1577 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1578 // r9 and r10 may be used to save non-volatile registers
1580 // 'from', 'to' and 'count' are now valid
1581 __ movptr(byte_count, count);
1582 __ shrptr(count, 3); // count => qword_count
1584 // Copy from high to low addresses.
1586 // Check for and copy trailing byte
1587 __ testl(byte_count, 1);
1588 __ jcc(Assembler::zero, L_copy_2_bytes);
1589 __ movb(rax, Address(from, byte_count, Address::times_1, -1));
1590 __ movb(Address(to, byte_count, Address::times_1, -1), rax);
1591 __ decrement(byte_count); // Adjust for possible trailing word
1593 // Check for and copy trailing word
1594 __ BIND(L_copy_2_bytes);
1595 __ testl(byte_count, 2);
1596 __ jcc(Assembler::zero, L_copy_4_bytes);
1597 __ movw(rax, Address(from, byte_count, Address::times_1, -2));
1598 __ movw(Address(to, byte_count, Address::times_1, -2), rax);
1600 // Check for and copy trailing dword
1601 __ BIND(L_copy_4_bytes);
1602 __ testl(byte_count, 4);
1603 __ jcc(Assembler::zero, L_copy_bytes);
1604 __ movl(rax, Address(from, qword_count, Address::times_8));
1605 __ movl(Address(to, qword_count, Address::times_8), rax);
1606 __ jmp(L_copy_bytes);
1608 // Copy trailing qwords
1609 __ BIND(L_copy_8_bytes);
1610 __ movq(rax, Address(from, qword_count, Address::times_8, -8));
1611 __ movq(Address(to, qword_count, Address::times_8, -8), rax);
1612 __ decrement(qword_count);
1613 __ jcc(Assembler::notZero, L_copy_8_bytes);
1615 restore_arg_regs();
1616 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free
1617 __ xorptr(rax, rax); // return 0
1618 __ leave(); // required for proper stackwalking of RuntimeStub frame
1619 __ ret(0);
1621 // Copy in multi-bytes chunks
1622 copy_bytes_backward(from, to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
1624 restore_arg_regs();
1625 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free
1626 __ xorptr(rax, rax); // return 0
1627 __ leave(); // required for proper stackwalking of RuntimeStub frame
1628 __ ret(0);
1630 return start;
1631 }
1633 // Arguments:
1634 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1635 // ignored
1636 // name - stub name string
1637 //
1638 // Inputs:
1639 // c_rarg0 - source array address
1640 // c_rarg1 - destination array address
1641 // c_rarg2 - element count, treated as ssize_t, can be zero
1642 //
1643 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we
1644 // let the hardware handle it. The two or four words within dwords
1645 // or qwords that span cache line boundaries will still be loaded
1646 // and stored atomically.
1647 //
1648 // Side Effects:
1649 // disjoint_short_copy_entry is set to the no-overlap entry point
1650 // used by generate_conjoint_short_copy().
1651 //
1652 address generate_disjoint_short_copy(bool aligned, address *entry, const char *name) {
1653 __ align(CodeEntryAlignment);
1654 StubCodeMark mark(this, "StubRoutines", name);
1655 address start = __ pc();
1657 Label L_copy_bytes, L_copy_8_bytes, L_copy_4_bytes,L_copy_2_bytes,L_exit;
1658 const Register from = rdi; // source array address
1659 const Register to = rsi; // destination array address
1660 const Register count = rdx; // elements count
1661 const Register word_count = rcx;
1662 const Register qword_count = count;
1663 const Register end_from = from; // source array end address
1664 const Register end_to = to; // destination array end address
1665 // End pointers are inclusive, and if count is not zero they point
1666 // to the last unit copied: end_to[0] := end_from[0]
1668 __ enter(); // required for proper stackwalking of RuntimeStub frame
1669 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1671 if (entry != NULL) {
1672 *entry = __ pc();
1673 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1674 BLOCK_COMMENT("Entry:");
1675 }
1677 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1678 // r9 and r10 may be used to save non-volatile registers
1680 // 'from', 'to' and 'count' are now valid
1681 __ movptr(word_count, count);
1682 __ shrptr(count, 2); // count => qword_count
1684 // Copy from low to high addresses. Use 'to' as scratch.
1685 __ lea(end_from, Address(from, qword_count, Address::times_8, -8));
1686 __ lea(end_to, Address(to, qword_count, Address::times_8, -8));
1687 __ negptr(qword_count);
1688 __ jmp(L_copy_bytes);
1690 // Copy trailing qwords
1691 __ BIND(L_copy_8_bytes);
1692 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8));
1693 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax);
1694 __ increment(qword_count);
1695 __ jcc(Assembler::notZero, L_copy_8_bytes);
1697 // Original 'dest' is trashed, so we can't use it as a
1698 // base register for a possible trailing word copy
1700 // Check for and copy trailing dword
1701 __ BIND(L_copy_4_bytes);
1702 __ testl(word_count, 2);
1703 __ jccb(Assembler::zero, L_copy_2_bytes);
1704 __ movl(rax, Address(end_from, 8));
1705 __ movl(Address(end_to, 8), rax);
1707 __ addptr(end_from, 4);
1708 __ addptr(end_to, 4);
1710 // Check for and copy trailing word
1711 __ BIND(L_copy_2_bytes);
1712 __ testl(word_count, 1);
1713 __ jccb(Assembler::zero, L_exit);
1714 __ movw(rax, Address(end_from, 8));
1715 __ movw(Address(end_to, 8), rax);
1717 __ BIND(L_exit);
1718 restore_arg_regs();
1719 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free
1720 __ xorptr(rax, rax); // return 0
1721 __ leave(); // required for proper stackwalking of RuntimeStub frame
1722 __ ret(0);
1724 // Copy in multi-bytes chunks
1725 copy_bytes_forward(end_from, end_to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
1726 __ jmp(L_copy_4_bytes);
1728 return start;
1729 }
1731 address generate_fill(BasicType t, bool aligned, const char *name) {
1732 __ align(CodeEntryAlignment);
1733 StubCodeMark mark(this, "StubRoutines", name);
1734 address start = __ pc();
1736 BLOCK_COMMENT("Entry:");
1738 const Register to = c_rarg0; // source array address
1739 const Register value = c_rarg1; // value
1740 const Register count = c_rarg2; // elements count
1742 __ enter(); // required for proper stackwalking of RuntimeStub frame
1744 __ generate_fill(t, aligned, to, value, count, rax, xmm0);
1746 __ leave(); // required for proper stackwalking of RuntimeStub frame
1747 __ ret(0);
1748 return start;
1749 }
1751 // Arguments:
1752 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1753 // ignored
1754 // name - stub name string
1755 //
1756 // Inputs:
1757 // c_rarg0 - source array address
1758 // c_rarg1 - destination array address
1759 // c_rarg2 - element count, treated as ssize_t, can be zero
1760 //
1761 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we
1762 // let the hardware handle it. The two or four words within dwords
1763 // or qwords that span cache line boundaries will still be loaded
1764 // and stored atomically.
1765 //
1766 address generate_conjoint_short_copy(bool aligned, address nooverlap_target,
1767 address *entry, const char *name) {
1768 __ align(CodeEntryAlignment);
1769 StubCodeMark mark(this, "StubRoutines", name);
1770 address start = __ pc();
1772 Label L_copy_bytes, L_copy_8_bytes, L_copy_4_bytes;
1773 const Register from = rdi; // source array address
1774 const Register to = rsi; // destination array address
1775 const Register count = rdx; // elements count
1776 const Register word_count = rcx;
1777 const Register qword_count = count;
1779 __ enter(); // required for proper stackwalking of RuntimeStub frame
1780 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1782 if (entry != NULL) {
1783 *entry = __ pc();
1784 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1785 BLOCK_COMMENT("Entry:");
1786 }
1788 array_overlap_test(nooverlap_target, Address::times_2);
1789 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1790 // r9 and r10 may be used to save non-volatile registers
1792 // 'from', 'to' and 'count' are now valid
1793 __ movptr(word_count, count);
1794 __ shrptr(count, 2); // count => qword_count
1796 // Copy from high to low addresses. Use 'to' as scratch.
1798 // Check for and copy trailing word
1799 __ testl(word_count, 1);
1800 __ jccb(Assembler::zero, L_copy_4_bytes);
1801 __ movw(rax, Address(from, word_count, Address::times_2, -2));
1802 __ movw(Address(to, word_count, Address::times_2, -2), rax);
1804 // Check for and copy trailing dword
1805 __ BIND(L_copy_4_bytes);
1806 __ testl(word_count, 2);
1807 __ jcc(Assembler::zero, L_copy_bytes);
1808 __ movl(rax, Address(from, qword_count, Address::times_8));
1809 __ movl(Address(to, qword_count, Address::times_8), rax);
1810 __ jmp(L_copy_bytes);
1812 // Copy trailing qwords
1813 __ BIND(L_copy_8_bytes);
1814 __ movq(rax, Address(from, qword_count, Address::times_8, -8));
1815 __ movq(Address(to, qword_count, Address::times_8, -8), rax);
1816 __ decrement(qword_count);
1817 __ jcc(Assembler::notZero, L_copy_8_bytes);
1819 restore_arg_regs();
1820 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free
1821 __ xorptr(rax, rax); // return 0
1822 __ leave(); // required for proper stackwalking of RuntimeStub frame
1823 __ ret(0);
1825 // Copy in multi-bytes chunks
1826 copy_bytes_backward(from, to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
1828 restore_arg_regs();
1829 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free
1830 __ xorptr(rax, rax); // return 0
1831 __ leave(); // required for proper stackwalking of RuntimeStub frame
1832 __ ret(0);
1834 return start;
1835 }
1837 // Arguments:
1838 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1839 // ignored
1840 // is_oop - true => oop array, so generate store check code
1841 // name - stub name string
1842 //
1843 // Inputs:
1844 // c_rarg0 - source array address
1845 // c_rarg1 - destination array address
1846 // c_rarg2 - element count, treated as ssize_t, can be zero
1847 //
1848 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let
1849 // the hardware handle it. The two dwords within qwords that span
1850 // cache line boundaries will still be loaded and stored atomicly.
1851 //
1852 // Side Effects:
1853 // disjoint_int_copy_entry is set to the no-overlap entry point
1854 // used by generate_conjoint_int_oop_copy().
1855 //
1856 address generate_disjoint_int_oop_copy(bool aligned, bool is_oop, address* entry,
1857 const char *name, bool dest_uninitialized = false) {
1858 __ align(CodeEntryAlignment);
1859 StubCodeMark mark(this, "StubRoutines", name);
1860 address start = __ pc();
1862 Label L_copy_bytes, L_copy_8_bytes, L_copy_4_bytes, L_exit;
1863 const Register from = rdi; // source array address
1864 const Register to = rsi; // destination array address
1865 const Register count = rdx; // elements count
1866 const Register dword_count = rcx;
1867 const Register qword_count = count;
1868 const Register end_from = from; // source array end address
1869 const Register end_to = to; // destination array end address
1870 const Register saved_to = r11; // saved destination array address
1871 // End pointers are inclusive, and if count is not zero they point
1872 // to the last unit copied: end_to[0] := end_from[0]
1874 __ enter(); // required for proper stackwalking of RuntimeStub frame
1875 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1877 if (entry != NULL) {
1878 *entry = __ pc();
1879 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1880 BLOCK_COMMENT("Entry:");
1881 }
1883 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1884 // r9 and r10 may be used to save non-volatile registers
1885 if (is_oop) {
1886 __ movq(saved_to, to);
1887 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized);
1888 }
1890 // 'from', 'to' and 'count' are now valid
1891 __ movptr(dword_count, count);
1892 __ shrptr(count, 1); // count => qword_count
1894 // Copy from low to high addresses. Use 'to' as scratch.
1895 __ lea(end_from, Address(from, qword_count, Address::times_8, -8));
1896 __ lea(end_to, Address(to, qword_count, Address::times_8, -8));
1897 __ negptr(qword_count);
1898 __ jmp(L_copy_bytes);
1900 // Copy trailing qwords
1901 __ BIND(L_copy_8_bytes);
1902 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8));
1903 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax);
1904 __ increment(qword_count);
1905 __ jcc(Assembler::notZero, L_copy_8_bytes);
1907 // Check for and copy trailing dword
1908 __ BIND(L_copy_4_bytes);
1909 __ testl(dword_count, 1); // Only byte test since the value is 0 or 1
1910 __ jccb(Assembler::zero, L_exit);
1911 __ movl(rax, Address(end_from, 8));
1912 __ movl(Address(end_to, 8), rax);
1914 __ BIND(L_exit);
1915 if (is_oop) {
1916 gen_write_ref_array_post_barrier(saved_to, dword_count, rax);
1917 }
1918 restore_arg_regs();
1919 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free
1920 __ xorptr(rax, rax); // return 0
1921 __ leave(); // required for proper stackwalking of RuntimeStub frame
1922 __ ret(0);
1924 // Copy in multi-bytes chunks
1925 copy_bytes_forward(end_from, end_to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
1926 __ jmp(L_copy_4_bytes);
1928 return start;
1929 }
1931 // Arguments:
1932 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary
1933 // ignored
1934 // is_oop - true => oop array, so generate store check code
1935 // name - stub name string
1936 //
1937 // Inputs:
1938 // c_rarg0 - source array address
1939 // c_rarg1 - destination array address
1940 // c_rarg2 - element count, treated as ssize_t, can be zero
1941 //
1942 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let
1943 // the hardware handle it. The two dwords within qwords that span
1944 // cache line boundaries will still be loaded and stored atomicly.
1945 //
1946 address generate_conjoint_int_oop_copy(bool aligned, bool is_oop, address nooverlap_target,
1947 address *entry, const char *name,
1948 bool dest_uninitialized = false) {
1949 __ align(CodeEntryAlignment);
1950 StubCodeMark mark(this, "StubRoutines", name);
1951 address start = __ pc();
1953 Label L_copy_bytes, L_copy_8_bytes, L_copy_2_bytes, L_exit;
1954 const Register from = rdi; // source array address
1955 const Register to = rsi; // destination array address
1956 const Register count = rdx; // elements count
1957 const Register dword_count = rcx;
1958 const Register qword_count = count;
1960 __ enter(); // required for proper stackwalking of RuntimeStub frame
1961 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
1963 if (entry != NULL) {
1964 *entry = __ pc();
1965 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
1966 BLOCK_COMMENT("Entry:");
1967 }
1969 array_overlap_test(nooverlap_target, Address::times_4);
1970 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
1971 // r9 and r10 may be used to save non-volatile registers
1973 if (is_oop) {
1974 // no registers are destroyed by this call
1975 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized);
1976 }
1978 assert_clean_int(count, rax); // Make sure 'count' is clean int.
1979 // 'from', 'to' and 'count' are now valid
1980 __ movptr(dword_count, count);
1981 __ shrptr(count, 1); // count => qword_count
1983 // Copy from high to low addresses. Use 'to' as scratch.
1985 // Check for and copy trailing dword
1986 __ testl(dword_count, 1);
1987 __ jcc(Assembler::zero, L_copy_bytes);
1988 __ movl(rax, Address(from, dword_count, Address::times_4, -4));
1989 __ movl(Address(to, dword_count, Address::times_4, -4), rax);
1990 __ jmp(L_copy_bytes);
1992 // Copy trailing qwords
1993 __ BIND(L_copy_8_bytes);
1994 __ movq(rax, Address(from, qword_count, Address::times_8, -8));
1995 __ movq(Address(to, qword_count, Address::times_8, -8), rax);
1996 __ decrement(qword_count);
1997 __ jcc(Assembler::notZero, L_copy_8_bytes);
1999 if (is_oop) {
2000 __ jmp(L_exit);
2001 }
2002 restore_arg_regs();
2003 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free
2004 __ xorptr(rax, rax); // return 0
2005 __ leave(); // required for proper stackwalking of RuntimeStub frame
2006 __ ret(0);
2008 // Copy in multi-bytes chunks
2009 copy_bytes_backward(from, to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
2011 __ BIND(L_exit);
2012 if (is_oop) {
2013 gen_write_ref_array_post_barrier(to, dword_count, rax);
2014 }
2015 restore_arg_regs();
2016 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free
2017 __ xorptr(rax, rax); // return 0
2018 __ leave(); // required for proper stackwalking of RuntimeStub frame
2019 __ ret(0);
2021 return start;
2022 }
2024 // Arguments:
2025 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes
2026 // ignored
2027 // is_oop - true => oop array, so generate store check code
2028 // name - stub name string
2029 //
2030 // Inputs:
2031 // c_rarg0 - source array address
2032 // c_rarg1 - destination array address
2033 // c_rarg2 - element count, treated as ssize_t, can be zero
2034 //
2035 // Side Effects:
2036 // disjoint_oop_copy_entry or disjoint_long_copy_entry is set to the
2037 // no-overlap entry point used by generate_conjoint_long_oop_copy().
2038 //
2039 address generate_disjoint_long_oop_copy(bool aligned, bool is_oop, address *entry,
2040 const char *name, bool dest_uninitialized = false) {
2041 __ align(CodeEntryAlignment);
2042 StubCodeMark mark(this, "StubRoutines", name);
2043 address start = __ pc();
2045 Label L_copy_bytes, L_copy_8_bytes, L_exit;
2046 const Register from = rdi; // source array address
2047 const Register to = rsi; // destination array address
2048 const Register qword_count = rdx; // elements count
2049 const Register end_from = from; // source array end address
2050 const Register end_to = rcx; // destination array end address
2051 const Register saved_to = to;
2052 const Register saved_count = r11;
2053 // End pointers are inclusive, and if count is not zero they point
2054 // to the last unit copied: end_to[0] := end_from[0]
2056 __ enter(); // required for proper stackwalking of RuntimeStub frame
2057 // Save no-overlap entry point for generate_conjoint_long_oop_copy()
2058 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
2060 if (entry != NULL) {
2061 *entry = __ pc();
2062 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
2063 BLOCK_COMMENT("Entry:");
2064 }
2066 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
2067 // r9 and r10 may be used to save non-volatile registers
2068 // 'from', 'to' and 'qword_count' are now valid
2069 if (is_oop) {
2070 // Save to and count for store barrier
2071 __ movptr(saved_count, qword_count);
2072 // no registers are destroyed by this call
2073 gen_write_ref_array_pre_barrier(to, qword_count, dest_uninitialized);
2074 }
2076 // Copy from low to high addresses. Use 'to' as scratch.
2077 __ lea(end_from, Address(from, qword_count, Address::times_8, -8));
2078 __ lea(end_to, Address(to, qword_count, Address::times_8, -8));
2079 __ negptr(qword_count);
2080 __ jmp(L_copy_bytes);
2082 // Copy trailing qwords
2083 __ BIND(L_copy_8_bytes);
2084 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8));
2085 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax);
2086 __ increment(qword_count);
2087 __ jcc(Assembler::notZero, L_copy_8_bytes);
2089 if (is_oop) {
2090 __ jmp(L_exit);
2091 } else {
2092 restore_arg_regs();
2093 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free
2094 __ xorptr(rax, rax); // return 0
2095 __ leave(); // required for proper stackwalking of RuntimeStub frame
2096 __ ret(0);
2097 }
2099 // Copy in multi-bytes chunks
2100 copy_bytes_forward(end_from, end_to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
2102 if (is_oop) {
2103 __ BIND(L_exit);
2104 gen_write_ref_array_post_barrier(saved_to, saved_count, rax);
2105 }
2106 restore_arg_regs();
2107 if (is_oop) {
2108 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); // Update counter after rscratch1 is free
2109 } else {
2110 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free
2111 }
2112 __ xorptr(rax, rax); // return 0
2113 __ leave(); // required for proper stackwalking of RuntimeStub frame
2114 __ ret(0);
2116 return start;
2117 }
2119 // Arguments:
2120 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes
2121 // ignored
2122 // is_oop - true => oop array, so generate store check code
2123 // name - stub name string
2124 //
2125 // Inputs:
2126 // c_rarg0 - source array address
2127 // c_rarg1 - destination array address
2128 // c_rarg2 - element count, treated as ssize_t, can be zero
2129 //
2130 address generate_conjoint_long_oop_copy(bool aligned, bool is_oop,
2131 address nooverlap_target, address *entry,
2132 const char *name, bool dest_uninitialized = false) {
2133 __ align(CodeEntryAlignment);
2134 StubCodeMark mark(this, "StubRoutines", name);
2135 address start = __ pc();
2137 Label L_copy_bytes, L_copy_8_bytes, L_exit;
2138 const Register from = rdi; // source array address
2139 const Register to = rsi; // destination array address
2140 const Register qword_count = rdx; // elements count
2141 const Register saved_count = rcx;
2143 __ enter(); // required for proper stackwalking of RuntimeStub frame
2144 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int.
2146 if (entry != NULL) {
2147 *entry = __ pc();
2148 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory)
2149 BLOCK_COMMENT("Entry:");
2150 }
2152 array_overlap_test(nooverlap_target, Address::times_8);
2153 setup_arg_regs(); // from => rdi, to => rsi, count => rdx
2154 // r9 and r10 may be used to save non-volatile registers
2155 // 'from', 'to' and 'qword_count' are now valid
2156 if (is_oop) {
2157 // Save to and count for store barrier
2158 __ movptr(saved_count, qword_count);
2159 // No registers are destroyed by this call
2160 gen_write_ref_array_pre_barrier(to, saved_count, dest_uninitialized);
2161 }
2163 __ jmp(L_copy_bytes);
2165 // Copy trailing qwords
2166 __ BIND(L_copy_8_bytes);
2167 __ movq(rax, Address(from, qword_count, Address::times_8, -8));
2168 __ movq(Address(to, qword_count, Address::times_8, -8), rax);
2169 __ decrement(qword_count);
2170 __ jcc(Assembler::notZero, L_copy_8_bytes);
2172 if (is_oop) {
2173 __ jmp(L_exit);
2174 } else {
2175 restore_arg_regs();
2176 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free
2177 __ xorptr(rax, rax); // return 0
2178 __ leave(); // required for proper stackwalking of RuntimeStub frame
2179 __ ret(0);
2180 }
2182 // Copy in multi-bytes chunks
2183 copy_bytes_backward(from, to, qword_count, rax, L_copy_bytes, L_copy_8_bytes);
2185 if (is_oop) {
2186 __ BIND(L_exit);
2187 gen_write_ref_array_post_barrier(to, saved_count, rax);
2188 }
2189 restore_arg_regs();
2190 if (is_oop) {
2191 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); // Update counter after rscratch1 is free
2192 } else {
2193 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free
2194 }
2195 __ xorptr(rax, rax); // return 0
2196 __ leave(); // required for proper stackwalking of RuntimeStub frame
2197 __ ret(0);
2199 return start;
2200 }
2203 // Helper for generating a dynamic type check.
2204 // Smashes no registers.
2205 void generate_type_check(Register sub_klass,
2206 Register super_check_offset,
2207 Register super_klass,
2208 Label& L_success) {
2209 assert_different_registers(sub_klass, super_check_offset, super_klass);
2211 BLOCK_COMMENT("type_check:");
2213 Label L_miss;
2215 __ check_klass_subtype_fast_path(sub_klass, super_klass, noreg, &L_success, &L_miss, NULL,
2216 super_check_offset);
2217 __ check_klass_subtype_slow_path(sub_klass, super_klass, noreg, noreg, &L_success, NULL);
2219 // Fall through on failure!
2220 __ BIND(L_miss);
2221 }
2223 //
2224 // Generate checkcasting array copy stub
2225 //
2226 // Input:
2227 // c_rarg0 - source array address
2228 // c_rarg1 - destination array address
2229 // c_rarg2 - element count, treated as ssize_t, can be zero
2230 // c_rarg3 - size_t ckoff (super_check_offset)
2231 // not Win64
2232 // c_rarg4 - oop ckval (super_klass)
2233 // Win64
2234 // rsp+40 - oop ckval (super_klass)
2235 //
2236 // Output:
2237 // rax == 0 - success
2238 // rax == -1^K - failure, where K is partial transfer count
2239 //
2240 address generate_checkcast_copy(const char *name, address *entry,
2241 bool dest_uninitialized = false) {
2243 Label L_load_element, L_store_element, L_do_card_marks, L_done;
2245 // Input registers (after setup_arg_regs)
2246 const Register from = rdi; // source array address
2247 const Register to = rsi; // destination array address
2248 const Register length = rdx; // elements count
2249 const Register ckoff = rcx; // super_check_offset
2250 const Register ckval = r8; // super_klass
2252 // Registers used as temps (r13, r14 are save-on-entry)
2253 const Register end_from = from; // source array end address
2254 const Register end_to = r13; // destination array end address
2255 const Register count = rdx; // -(count_remaining)
2256 const Register r14_length = r14; // saved copy of length
2257 // End pointers are inclusive, and if length is not zero they point
2258 // to the last unit copied: end_to[0] := end_from[0]
2260 const Register rax_oop = rax; // actual oop copied
2261 const Register r11_klass = r11; // oop._klass
2263 //---------------------------------------------------------------
2264 // Assembler stub will be used for this call to arraycopy
2265 // if the two arrays are subtypes of Object[] but the
2266 // destination array type is not equal to or a supertype
2267 // of the source type. Each element must be separately
2268 // checked.
2270 __ align(CodeEntryAlignment);
2271 StubCodeMark mark(this, "StubRoutines", name);
2272 address start = __ pc();
2274 __ enter(); // required for proper stackwalking of RuntimeStub frame
2276 #ifdef ASSERT
2277 // caller guarantees that the arrays really are different
2278 // otherwise, we would have to make conjoint checks
2279 { Label L;
2280 array_overlap_test(L, TIMES_OOP);
2281 __ stop("checkcast_copy within a single array");
2282 __ bind(L);
2283 }
2284 #endif //ASSERT
2286 setup_arg_regs(4); // from => rdi, to => rsi, length => rdx
2287 // ckoff => rcx, ckval => r8
2288 // r9 and r10 may be used to save non-volatile registers
2289 #ifdef _WIN64
2290 // last argument (#4) is on stack on Win64
2291 __ movptr(ckval, Address(rsp, 6 * wordSize));
2292 #endif
2294 // Caller of this entry point must set up the argument registers.
2295 if (entry != NULL) {
2296 *entry = __ pc();
2297 BLOCK_COMMENT("Entry:");
2298 }
2300 // allocate spill slots for r13, r14
2301 enum {
2302 saved_r13_offset,
2303 saved_r14_offset,
2304 saved_rbp_offset
2305 };
2306 __ subptr(rsp, saved_rbp_offset * wordSize);
2307 __ movptr(Address(rsp, saved_r13_offset * wordSize), r13);
2308 __ movptr(Address(rsp, saved_r14_offset * wordSize), r14);
2310 // check that int operands are properly extended to size_t
2311 assert_clean_int(length, rax);
2312 assert_clean_int(ckoff, rax);
2314 #ifdef ASSERT
2315 BLOCK_COMMENT("assert consistent ckoff/ckval");
2316 // The ckoff and ckval must be mutually consistent,
2317 // even though caller generates both.
2318 { Label L;
2319 int sco_offset = in_bytes(Klass::super_check_offset_offset());
2320 __ cmpl(ckoff, Address(ckval, sco_offset));
2321 __ jcc(Assembler::equal, L);
2322 __ stop("super_check_offset inconsistent");
2323 __ bind(L);
2324 }
2325 #endif //ASSERT
2327 // Loop-invariant addresses. They are exclusive end pointers.
2328 Address end_from_addr(from, length, TIMES_OOP, 0);
2329 Address end_to_addr(to, length, TIMES_OOP, 0);
2330 // Loop-variant addresses. They assume post-incremented count < 0.
2331 Address from_element_addr(end_from, count, TIMES_OOP, 0);
2332 Address to_element_addr(end_to, count, TIMES_OOP, 0);
2334 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized);
2336 // Copy from low to high addresses, indexed from the end of each array.
2337 __ lea(end_from, end_from_addr);
2338 __ lea(end_to, end_to_addr);
2339 __ movptr(r14_length, length); // save a copy of the length
2340 assert(length == count, ""); // else fix next line:
2341 __ negptr(count); // negate and test the length
2342 __ jcc(Assembler::notZero, L_load_element);
2344 // Empty array: Nothing to do.
2345 __ xorptr(rax, rax); // return 0 on (trivial) success
2346 __ jmp(L_done);
2348 // ======== begin loop ========
2349 // (Loop is rotated; its entry is L_load_element.)
2350 // Loop control:
2351 // for (count = -count; count != 0; count++)
2352 // Base pointers src, dst are biased by 8*(count-1),to last element.
2353 __ align(OptoLoopAlignment);
2355 __ BIND(L_store_element);
2356 __ store_heap_oop(to_element_addr, rax_oop); // store the oop
2357 __ increment(count); // increment the count toward zero
2358 __ jcc(Assembler::zero, L_do_card_marks);
2360 // ======== loop entry is here ========
2361 __ BIND(L_load_element);
2362 __ load_heap_oop(rax_oop, from_element_addr); // load the oop
2363 __ testptr(rax_oop, rax_oop);
2364 __ jcc(Assembler::zero, L_store_element);
2366 __ load_klass(r11_klass, rax_oop);// query the object klass
2367 generate_type_check(r11_klass, ckoff, ckval, L_store_element);
2368 // ======== end loop ========
2370 // It was a real error; we must depend on the caller to finish the job.
2371 // Register rdx = -1 * number of *remaining* oops, r14 = *total* oops.
2372 // Emit GC store barriers for the oops we have copied (r14 + rdx),
2373 // and report their number to the caller.
2374 assert_different_registers(rax, r14_length, count, to, end_to, rcx, rscratch1);
2375 Label L_post_barrier;
2376 __ addptr(r14_length, count); // K = (original - remaining) oops
2377 __ movptr(rax, r14_length); // save the value
2378 __ notptr(rax); // report (-1^K) to caller (does not affect flags)
2379 __ jccb(Assembler::notZero, L_post_barrier);
2380 __ jmp(L_done); // K == 0, nothing was copied, skip post barrier
2382 // Come here on success only.
2383 __ BIND(L_do_card_marks);
2384 __ xorptr(rax, rax); // return 0 on success
2386 __ BIND(L_post_barrier);
2387 gen_write_ref_array_post_barrier(to, r14_length, rscratch1);
2389 // Common exit point (success or failure).
2390 __ BIND(L_done);
2391 __ movptr(r13, Address(rsp, saved_r13_offset * wordSize));
2392 __ movptr(r14, Address(rsp, saved_r14_offset * wordSize));
2393 restore_arg_regs();
2394 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr); // Update counter after rscratch1 is free
2395 __ leave(); // required for proper stackwalking of RuntimeStub frame
2396 __ ret(0);
2398 return start;
2399 }
2401 //
2402 // Generate 'unsafe' array copy stub
2403 // Though just as safe as the other stubs, it takes an unscaled
2404 // size_t argument instead of an element count.
2405 //
2406 // Input:
2407 // c_rarg0 - source array address
2408 // c_rarg1 - destination array address
2409 // c_rarg2 - byte count, treated as ssize_t, can be zero
2410 //
2411 // Examines the alignment of the operands and dispatches
2412 // to a long, int, short, or byte copy loop.
2413 //
2414 address generate_unsafe_copy(const char *name,
2415 address byte_copy_entry, address short_copy_entry,
2416 address int_copy_entry, address long_copy_entry) {
2418 Label L_long_aligned, L_int_aligned, L_short_aligned;
2420 // Input registers (before setup_arg_regs)
2421 const Register from = c_rarg0; // source array address
2422 const Register to = c_rarg1; // destination array address
2423 const Register size = c_rarg2; // byte count (size_t)
2425 // Register used as a temp
2426 const Register bits = rax; // test copy of low bits
2428 __ align(CodeEntryAlignment);
2429 StubCodeMark mark(this, "StubRoutines", name);
2430 address start = __ pc();
2432 __ enter(); // required for proper stackwalking of RuntimeStub frame
2434 // bump this on entry, not on exit:
2435 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr);
2437 __ mov(bits, from);
2438 __ orptr(bits, to);
2439 __ orptr(bits, size);
2441 __ testb(bits, BytesPerLong-1);
2442 __ jccb(Assembler::zero, L_long_aligned);
2444 __ testb(bits, BytesPerInt-1);
2445 __ jccb(Assembler::zero, L_int_aligned);
2447 __ testb(bits, BytesPerShort-1);
2448 __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry));
2450 __ BIND(L_short_aligned);
2451 __ shrptr(size, LogBytesPerShort); // size => short_count
2452 __ jump(RuntimeAddress(short_copy_entry));
2454 __ BIND(L_int_aligned);
2455 __ shrptr(size, LogBytesPerInt); // size => int_count
2456 __ jump(RuntimeAddress(int_copy_entry));
2458 __ BIND(L_long_aligned);
2459 __ shrptr(size, LogBytesPerLong); // size => qword_count
2460 __ jump(RuntimeAddress(long_copy_entry));
2462 return start;
2463 }
2465 // Perform range checks on the proposed arraycopy.
2466 // Kills temp, but nothing else.
2467 // Also, clean the sign bits of src_pos and dst_pos.
2468 void arraycopy_range_checks(Register src, // source array oop (c_rarg0)
2469 Register src_pos, // source position (c_rarg1)
2470 Register dst, // destination array oo (c_rarg2)
2471 Register dst_pos, // destination position (c_rarg3)
2472 Register length,
2473 Register temp,
2474 Label& L_failed) {
2475 BLOCK_COMMENT("arraycopy_range_checks:");
2477 // if (src_pos + length > arrayOop(src)->length()) FAIL;
2478 __ movl(temp, length);
2479 __ addl(temp, src_pos); // src_pos + length
2480 __ cmpl(temp, Address(src, arrayOopDesc::length_offset_in_bytes()));
2481 __ jcc(Assembler::above, L_failed);
2483 // if (dst_pos + length > arrayOop(dst)->length()) FAIL;
2484 __ movl(temp, length);
2485 __ addl(temp, dst_pos); // dst_pos + length
2486 __ cmpl(temp, Address(dst, arrayOopDesc::length_offset_in_bytes()));
2487 __ jcc(Assembler::above, L_failed);
2489 // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'.
2490 // Move with sign extension can be used since they are positive.
2491 __ movslq(src_pos, src_pos);
2492 __ movslq(dst_pos, dst_pos);
2494 BLOCK_COMMENT("arraycopy_range_checks done");
2495 }
2497 //
2498 // Generate generic array copy stubs
2499 //
2500 // Input:
2501 // c_rarg0 - src oop
2502 // c_rarg1 - src_pos (32-bits)
2503 // c_rarg2 - dst oop
2504 // c_rarg3 - dst_pos (32-bits)
2505 // not Win64
2506 // c_rarg4 - element count (32-bits)
2507 // Win64
2508 // rsp+40 - element count (32-bits)
2509 //
2510 // Output:
2511 // rax == 0 - success
2512 // rax == -1^K - failure, where K is partial transfer count
2513 //
2514 address generate_generic_copy(const char *name,
2515 address byte_copy_entry, address short_copy_entry,
2516 address int_copy_entry, address oop_copy_entry,
2517 address long_copy_entry, address checkcast_copy_entry) {
2519 Label L_failed, L_failed_0, L_objArray;
2520 Label L_copy_bytes, L_copy_shorts, L_copy_ints, L_copy_longs;
2522 // Input registers
2523 const Register src = c_rarg0; // source array oop
2524 const Register src_pos = c_rarg1; // source position
2525 const Register dst = c_rarg2; // destination array oop
2526 const Register dst_pos = c_rarg3; // destination position
2527 #ifndef _WIN64
2528 const Register length = c_rarg4;
2529 #else
2530 const Address length(rsp, 6 * wordSize); // elements count is on stack on Win64
2531 #endif
2533 { int modulus = CodeEntryAlignment;
2534 int target = modulus - 5; // 5 = sizeof jmp(L_failed)
2535 int advance = target - (__ offset() % modulus);
2536 if (advance < 0) advance += modulus;
2537 if (advance > 0) __ nop(advance);
2538 }
2539 StubCodeMark mark(this, "StubRoutines", name);
2541 // Short-hop target to L_failed. Makes for denser prologue code.
2542 __ BIND(L_failed_0);
2543 __ jmp(L_failed);
2544 assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed");
2546 __ align(CodeEntryAlignment);
2547 address start = __ pc();
2549 __ enter(); // required for proper stackwalking of RuntimeStub frame
2551 // bump this on entry, not on exit:
2552 inc_counter_np(SharedRuntime::_generic_array_copy_ctr);
2554 //-----------------------------------------------------------------------
2555 // Assembler stub will be used for this call to arraycopy
2556 // if the following conditions are met:
2557 //
2558 // (1) src and dst must not be null.
2559 // (2) src_pos must not be negative.
2560 // (3) dst_pos must not be negative.
2561 // (4) length must not be negative.
2562 // (5) src klass and dst klass should be the same and not NULL.
2563 // (6) src and dst should be arrays.
2564 // (7) src_pos + length must not exceed length of src.
2565 // (8) dst_pos + length must not exceed length of dst.
2566 //
2568 // if (src == NULL) return -1;
2569 __ testptr(src, src); // src oop
2570 size_t j1off = __ offset();
2571 __ jccb(Assembler::zero, L_failed_0);
2573 // if (src_pos < 0) return -1;
2574 __ testl(src_pos, src_pos); // src_pos (32-bits)
2575 __ jccb(Assembler::negative, L_failed_0);
2577 // if (dst == NULL) return -1;
2578 __ testptr(dst, dst); // dst oop
2579 __ jccb(Assembler::zero, L_failed_0);
2581 // if (dst_pos < 0) return -1;
2582 __ testl(dst_pos, dst_pos); // dst_pos (32-bits)
2583 size_t j4off = __ offset();
2584 __ jccb(Assembler::negative, L_failed_0);
2586 // The first four tests are very dense code,
2587 // but not quite dense enough to put four
2588 // jumps in a 16-byte instruction fetch buffer.
2589 // That's good, because some branch predicters
2590 // do not like jumps so close together.
2591 // Make sure of this.
2592 guarantee(((j1off ^ j4off) & ~15) != 0, "I$ line of 1st & 4th jumps");
2594 // registers used as temp
2595 const Register r11_length = r11; // elements count to copy
2596 const Register r10_src_klass = r10; // array klass
2598 // if (length < 0) return -1;
2599 __ movl(r11_length, length); // length (elements count, 32-bits value)
2600 __ testl(r11_length, r11_length);
2601 __ jccb(Assembler::negative, L_failed_0);
2603 __ load_klass(r10_src_klass, src);
2604 #ifdef ASSERT
2605 // assert(src->klass() != NULL);
2606 {
2607 BLOCK_COMMENT("assert klasses not null {");
2608 Label L1, L2;
2609 __ testptr(r10_src_klass, r10_src_klass);
2610 __ jcc(Assembler::notZero, L2); // it is broken if klass is NULL
2611 __ bind(L1);
2612 __ stop("broken null klass");
2613 __ bind(L2);
2614 __ load_klass(rax, dst);
2615 __ cmpq(rax, 0);
2616 __ jcc(Assembler::equal, L1); // this would be broken also
2617 BLOCK_COMMENT("} assert klasses not null done");
2618 }
2619 #endif
2621 // Load layout helper (32-bits)
2622 //
2623 // |array_tag| | header_size | element_type | |log2_element_size|
2624 // 32 30 24 16 8 2 0
2625 //
2626 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0
2627 //
2629 const int lh_offset = in_bytes(Klass::layout_helper_offset());
2631 // Handle objArrays completely differently...
2632 const jint objArray_lh = Klass::array_layout_helper(T_OBJECT);
2633 __ cmpl(Address(r10_src_klass, lh_offset), objArray_lh);
2634 __ jcc(Assembler::equal, L_objArray);
2636 // if (src->klass() != dst->klass()) return -1;
2637 __ load_klass(rax, dst);
2638 __ cmpq(r10_src_klass, rax);
2639 __ jcc(Assembler::notEqual, L_failed);
2641 const Register rax_lh = rax; // layout helper
2642 __ movl(rax_lh, Address(r10_src_klass, lh_offset));
2644 // if (!src->is_Array()) return -1;
2645 __ cmpl(rax_lh, Klass::_lh_neutral_value);
2646 __ jcc(Assembler::greaterEqual, L_failed);
2648 // At this point, it is known to be a typeArray (array_tag 0x3).
2649 #ifdef ASSERT
2650 {
2651 BLOCK_COMMENT("assert primitive array {");
2652 Label L;
2653 __ cmpl(rax_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift));
2654 __ jcc(Assembler::greaterEqual, L);
2655 __ stop("must be a primitive array");
2656 __ bind(L);
2657 BLOCK_COMMENT("} assert primitive array done");
2658 }
2659 #endif
2661 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length,
2662 r10, L_failed);
2664 // TypeArrayKlass
2665 //
2666 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize);
2667 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize);
2668 //
2670 const Register r10_offset = r10; // array offset
2671 const Register rax_elsize = rax_lh; // element size
2673 __ movl(r10_offset, rax_lh);
2674 __ shrl(r10_offset, Klass::_lh_header_size_shift);
2675 __ andptr(r10_offset, Klass::_lh_header_size_mask); // array_offset
2676 __ addptr(src, r10_offset); // src array offset
2677 __ addptr(dst, r10_offset); // dst array offset
2678 BLOCK_COMMENT("choose copy loop based on element size");
2679 __ andl(rax_lh, Klass::_lh_log2_element_size_mask); // rax_lh -> rax_elsize
2681 // next registers should be set before the jump to corresponding stub
2682 const Register from = c_rarg0; // source array address
2683 const Register to = c_rarg1; // destination array address
2684 const Register count = c_rarg2; // elements count
2686 // 'from', 'to', 'count' registers should be set in such order
2687 // since they are the same as 'src', 'src_pos', 'dst'.
2689 __ BIND(L_copy_bytes);
2690 __ cmpl(rax_elsize, 0);
2691 __ jccb(Assembler::notEqual, L_copy_shorts);
2692 __ lea(from, Address(src, src_pos, Address::times_1, 0));// src_addr
2693 __ lea(to, Address(dst, dst_pos, Address::times_1, 0));// dst_addr
2694 __ movl2ptr(count, r11_length); // length
2695 __ jump(RuntimeAddress(byte_copy_entry));
2697 __ BIND(L_copy_shorts);
2698 __ cmpl(rax_elsize, LogBytesPerShort);
2699 __ jccb(Assembler::notEqual, L_copy_ints);
2700 __ lea(from, Address(src, src_pos, Address::times_2, 0));// src_addr
2701 __ lea(to, Address(dst, dst_pos, Address::times_2, 0));// dst_addr
2702 __ movl2ptr(count, r11_length); // length
2703 __ jump(RuntimeAddress(short_copy_entry));
2705 __ BIND(L_copy_ints);
2706 __ cmpl(rax_elsize, LogBytesPerInt);
2707 __ jccb(Assembler::notEqual, L_copy_longs);
2708 __ lea(from, Address(src, src_pos, Address::times_4, 0));// src_addr
2709 __ lea(to, Address(dst, dst_pos, Address::times_4, 0));// dst_addr
2710 __ movl2ptr(count, r11_length); // length
2711 __ jump(RuntimeAddress(int_copy_entry));
2713 __ BIND(L_copy_longs);
2714 #ifdef ASSERT
2715 {
2716 BLOCK_COMMENT("assert long copy {");
2717 Label L;
2718 __ cmpl(rax_elsize, LogBytesPerLong);
2719 __ jcc(Assembler::equal, L);
2720 __ stop("must be long copy, but elsize is wrong");
2721 __ bind(L);
2722 BLOCK_COMMENT("} assert long copy done");
2723 }
2724 #endif
2725 __ lea(from, Address(src, src_pos, Address::times_8, 0));// src_addr
2726 __ lea(to, Address(dst, dst_pos, Address::times_8, 0));// dst_addr
2727 __ movl2ptr(count, r11_length); // length
2728 __ jump(RuntimeAddress(long_copy_entry));
2730 // ObjArrayKlass
2731 __ BIND(L_objArray);
2732 // live at this point: r10_src_klass, r11_length, src[_pos], dst[_pos]
2734 Label L_plain_copy, L_checkcast_copy;
2735 // test array classes for subtyping
2736 __ load_klass(rax, dst);
2737 __ cmpq(r10_src_klass, rax); // usual case is exact equality
2738 __ jcc(Assembler::notEqual, L_checkcast_copy);
2740 // Identically typed arrays can be copied without element-wise checks.
2741 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length,
2742 r10, L_failed);
2744 __ lea(from, Address(src, src_pos, TIMES_OOP,
2745 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr
2746 __ lea(to, Address(dst, dst_pos, TIMES_OOP,
2747 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr
2748 __ movl2ptr(count, r11_length); // length
2749 __ BIND(L_plain_copy);
2750 __ jump(RuntimeAddress(oop_copy_entry));
2752 __ BIND(L_checkcast_copy);
2753 // live at this point: r10_src_klass, r11_length, rax (dst_klass)
2754 {
2755 // Before looking at dst.length, make sure dst is also an objArray.
2756 __ cmpl(Address(rax, lh_offset), objArray_lh);
2757 __ jcc(Assembler::notEqual, L_failed);
2759 // It is safe to examine both src.length and dst.length.
2760 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length,
2761 rax, L_failed);
2763 const Register r11_dst_klass = r11;
2764 __ load_klass(r11_dst_klass, dst); // reload
2766 // Marshal the base address arguments now, freeing registers.
2767 __ lea(from, Address(src, src_pos, TIMES_OOP,
2768 arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
2769 __ lea(to, Address(dst, dst_pos, TIMES_OOP,
2770 arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
2771 __ movl(count, length); // length (reloaded)
2772 Register sco_temp = c_rarg3; // this register is free now
2773 assert_different_registers(from, to, count, sco_temp,
2774 r11_dst_klass, r10_src_klass);
2775 assert_clean_int(count, sco_temp);
2777 // Generate the type check.
2778 const int sco_offset = in_bytes(Klass::super_check_offset_offset());
2779 __ movl(sco_temp, Address(r11_dst_klass, sco_offset));
2780 assert_clean_int(sco_temp, rax);
2781 generate_type_check(r10_src_klass, sco_temp, r11_dst_klass, L_plain_copy);
2783 // Fetch destination element klass from the ObjArrayKlass header.
2784 int ek_offset = in_bytes(ObjArrayKlass::element_klass_offset());
2785 __ movptr(r11_dst_klass, Address(r11_dst_klass, ek_offset));
2786 __ movl( sco_temp, Address(r11_dst_klass, sco_offset));
2787 assert_clean_int(sco_temp, rax);
2789 // the checkcast_copy loop needs two extra arguments:
2790 assert(c_rarg3 == sco_temp, "#3 already in place");
2791 // Set up arguments for checkcast_copy_entry.
2792 setup_arg_regs(4);
2793 __ movptr(r8, r11_dst_klass); // dst.klass.element_klass, r8 is c_rarg4 on Linux/Solaris
2794 __ jump(RuntimeAddress(checkcast_copy_entry));
2795 }
2797 __ BIND(L_failed);
2798 __ xorptr(rax, rax);
2799 __ notptr(rax); // return -1
2800 __ leave(); // required for proper stackwalking of RuntimeStub frame
2801 __ ret(0);
2803 return start;
2804 }
2806 void generate_arraycopy_stubs() {
2807 address entry;
2808 address entry_jbyte_arraycopy;
2809 address entry_jshort_arraycopy;
2810 address entry_jint_arraycopy;
2811 address entry_oop_arraycopy;
2812 address entry_jlong_arraycopy;
2813 address entry_checkcast_arraycopy;
2815 StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, &entry,
2816 "jbyte_disjoint_arraycopy");
2817 StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, entry, &entry_jbyte_arraycopy,
2818 "jbyte_arraycopy");
2820 StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, &entry,
2821 "jshort_disjoint_arraycopy");
2822 StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, entry, &entry_jshort_arraycopy,
2823 "jshort_arraycopy");
2825 StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, false, &entry,
2826 "jint_disjoint_arraycopy");
2827 StubRoutines::_jint_arraycopy = generate_conjoint_int_oop_copy(false, false, entry,
2828 &entry_jint_arraycopy, "jint_arraycopy");
2830 StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, false, &entry,
2831 "jlong_disjoint_arraycopy");
2832 StubRoutines::_jlong_arraycopy = generate_conjoint_long_oop_copy(false, false, entry,
2833 &entry_jlong_arraycopy, "jlong_arraycopy");
2836 if (UseCompressedOops) {
2837 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, true, &entry,
2838 "oop_disjoint_arraycopy");
2839 StubRoutines::_oop_arraycopy = generate_conjoint_int_oop_copy(false, true, entry,
2840 &entry_oop_arraycopy, "oop_arraycopy");
2841 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_int_oop_copy(false, true, &entry,
2842 "oop_disjoint_arraycopy_uninit",
2843 /*dest_uninitialized*/true);
2844 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_int_oop_copy(false, true, entry,
2845 NULL, "oop_arraycopy_uninit",
2846 /*dest_uninitialized*/true);
2847 } else {
2848 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, true, &entry,
2849 "oop_disjoint_arraycopy");
2850 StubRoutines::_oop_arraycopy = generate_conjoint_long_oop_copy(false, true, entry,
2851 &entry_oop_arraycopy, "oop_arraycopy");
2852 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_long_oop_copy(false, true, &entry,
2853 "oop_disjoint_arraycopy_uninit",
2854 /*dest_uninitialized*/true);
2855 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_long_oop_copy(false, true, entry,
2856 NULL, "oop_arraycopy_uninit",
2857 /*dest_uninitialized*/true);
2858 }
2860 StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy", &entry_checkcast_arraycopy);
2861 StubRoutines::_checkcast_arraycopy_uninit = generate_checkcast_copy("checkcast_arraycopy_uninit", NULL,
2862 /*dest_uninitialized*/true);
2864 StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy",
2865 entry_jbyte_arraycopy,
2866 entry_jshort_arraycopy,
2867 entry_jint_arraycopy,
2868 entry_jlong_arraycopy);
2869 StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy",
2870 entry_jbyte_arraycopy,
2871 entry_jshort_arraycopy,
2872 entry_jint_arraycopy,
2873 entry_oop_arraycopy,
2874 entry_jlong_arraycopy,
2875 entry_checkcast_arraycopy);
2877 StubRoutines::_jbyte_fill = generate_fill(T_BYTE, false, "jbyte_fill");
2878 StubRoutines::_jshort_fill = generate_fill(T_SHORT, false, "jshort_fill");
2879 StubRoutines::_jint_fill = generate_fill(T_INT, false, "jint_fill");
2880 StubRoutines::_arrayof_jbyte_fill = generate_fill(T_BYTE, true, "arrayof_jbyte_fill");
2881 StubRoutines::_arrayof_jshort_fill = generate_fill(T_SHORT, true, "arrayof_jshort_fill");
2882 StubRoutines::_arrayof_jint_fill = generate_fill(T_INT, true, "arrayof_jint_fill");
2884 // We don't generate specialized code for HeapWord-aligned source
2885 // arrays, so just use the code we've already generated
2886 StubRoutines::_arrayof_jbyte_disjoint_arraycopy = StubRoutines::_jbyte_disjoint_arraycopy;
2887 StubRoutines::_arrayof_jbyte_arraycopy = StubRoutines::_jbyte_arraycopy;
2889 StubRoutines::_arrayof_jshort_disjoint_arraycopy = StubRoutines::_jshort_disjoint_arraycopy;
2890 StubRoutines::_arrayof_jshort_arraycopy = StubRoutines::_jshort_arraycopy;
2892 StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy;
2893 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy;
2895 StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy;
2896 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy;
2898 StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy;
2899 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy;
2901 StubRoutines::_arrayof_oop_disjoint_arraycopy_uninit = StubRoutines::_oop_disjoint_arraycopy_uninit;
2902 StubRoutines::_arrayof_oop_arraycopy_uninit = StubRoutines::_oop_arraycopy_uninit;
2903 }
2905 void generate_math_stubs() {
2906 {
2907 StubCodeMark mark(this, "StubRoutines", "log");
2908 StubRoutines::_intrinsic_log = (double (*)(double)) __ pc();
2910 __ subq(rsp, 8);
2911 __ movdbl(Address(rsp, 0), xmm0);
2912 __ fld_d(Address(rsp, 0));
2913 __ flog();
2914 __ fstp_d(Address(rsp, 0));
2915 __ movdbl(xmm0, Address(rsp, 0));
2916 __ addq(rsp, 8);
2917 __ ret(0);
2918 }
2919 {
2920 StubCodeMark mark(this, "StubRoutines", "log10");
2921 StubRoutines::_intrinsic_log10 = (double (*)(double)) __ pc();
2923 __ subq(rsp, 8);
2924 __ movdbl(Address(rsp, 0), xmm0);
2925 __ fld_d(Address(rsp, 0));
2926 __ flog10();
2927 __ fstp_d(Address(rsp, 0));
2928 __ movdbl(xmm0, Address(rsp, 0));
2929 __ addq(rsp, 8);
2930 __ ret(0);
2931 }
2932 {
2933 StubCodeMark mark(this, "StubRoutines", "sin");
2934 StubRoutines::_intrinsic_sin = (double (*)(double)) __ pc();
2936 __ subq(rsp, 8);
2937 __ movdbl(Address(rsp, 0), xmm0);
2938 __ fld_d(Address(rsp, 0));
2939 __ trigfunc('s');
2940 __ fstp_d(Address(rsp, 0));
2941 __ movdbl(xmm0, Address(rsp, 0));
2942 __ addq(rsp, 8);
2943 __ ret(0);
2944 }
2945 {
2946 StubCodeMark mark(this, "StubRoutines", "cos");
2947 StubRoutines::_intrinsic_cos = (double (*)(double)) __ pc();
2949 __ subq(rsp, 8);
2950 __ movdbl(Address(rsp, 0), xmm0);
2951 __ fld_d(Address(rsp, 0));
2952 __ trigfunc('c');
2953 __ fstp_d(Address(rsp, 0));
2954 __ movdbl(xmm0, Address(rsp, 0));
2955 __ addq(rsp, 8);
2956 __ ret(0);
2957 }
2958 {
2959 StubCodeMark mark(this, "StubRoutines", "tan");
2960 StubRoutines::_intrinsic_tan = (double (*)(double)) __ pc();
2962 __ subq(rsp, 8);
2963 __ movdbl(Address(rsp, 0), xmm0);
2964 __ fld_d(Address(rsp, 0));
2965 __ trigfunc('t');
2966 __ fstp_d(Address(rsp, 0));
2967 __ movdbl(xmm0, Address(rsp, 0));
2968 __ addq(rsp, 8);
2969 __ ret(0);
2970 }
2971 {
2972 StubCodeMark mark(this, "StubRoutines", "exp");
2973 StubRoutines::_intrinsic_exp = (double (*)(double)) __ pc();
2975 __ subq(rsp, 8);
2976 __ movdbl(Address(rsp, 0), xmm0);
2977 __ fld_d(Address(rsp, 0));
2978 __ exp_with_fallback(0);
2979 __ fstp_d(Address(rsp, 0));
2980 __ movdbl(xmm0, Address(rsp, 0));
2981 __ addq(rsp, 8);
2982 __ ret(0);
2983 }
2984 {
2985 StubCodeMark mark(this, "StubRoutines", "pow");
2986 StubRoutines::_intrinsic_pow = (double (*)(double,double)) __ pc();
2988 __ subq(rsp, 8);
2989 __ movdbl(Address(rsp, 0), xmm1);
2990 __ fld_d(Address(rsp, 0));
2991 __ movdbl(Address(rsp, 0), xmm0);
2992 __ fld_d(Address(rsp, 0));
2993 __ pow_with_fallback(0);
2994 __ fstp_d(Address(rsp, 0));
2995 __ movdbl(xmm0, Address(rsp, 0));
2996 __ addq(rsp, 8);
2997 __ ret(0);
2998 }
2999 }
3001 // AES intrinsic stubs
3002 enum {AESBlockSize = 16};
3004 address generate_key_shuffle_mask() {
3005 __ align(16);
3006 StubCodeMark mark(this, "StubRoutines", "key_shuffle_mask");
3007 address start = __ pc();
3008 __ emit_data64( 0x0405060700010203, relocInfo::none );
3009 __ emit_data64( 0x0c0d0e0f08090a0b, relocInfo::none );
3010 return start;
3011 }
3013 // Utility routine for loading a 128-bit key word in little endian format
3014 // can optionally specify that the shuffle mask is already in an xmmregister
3015 void load_key(XMMRegister xmmdst, Register key, int offset, XMMRegister xmm_shuf_mask=NULL) {
3016 __ movdqu(xmmdst, Address(key, offset));
3017 if (xmm_shuf_mask != NULL) {
3018 __ pshufb(xmmdst, xmm_shuf_mask);
3019 } else {
3020 __ pshufb(xmmdst, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
3021 }
3022 }
3024 // Arguments:
3025 //
3026 // Inputs:
3027 // c_rarg0 - source byte array address
3028 // c_rarg1 - destination byte array address
3029 // c_rarg2 - K (key) in little endian int array
3030 //
3031 address generate_aescrypt_encryptBlock() {
3032 assert(UseAES, "need AES instructions and misaligned SSE support");
3033 __ align(CodeEntryAlignment);
3034 StubCodeMark mark(this, "StubRoutines", "aescrypt_encryptBlock");
3035 Label L_doLast;
3036 address start = __ pc();
3038 const Register from = c_rarg0; // source array address
3039 const Register to = c_rarg1; // destination array address
3040 const Register key = c_rarg2; // key array address
3041 const Register keylen = rax;
3043 const XMMRegister xmm_result = xmm0;
3044 const XMMRegister xmm_key_shuf_mask = xmm1;
3045 // On win64 xmm6-xmm15 must be preserved so don't use them.
3046 const XMMRegister xmm_temp1 = xmm2;
3047 const XMMRegister xmm_temp2 = xmm3;
3048 const XMMRegister xmm_temp3 = xmm4;
3049 const XMMRegister xmm_temp4 = xmm5;
3051 __ enter(); // required for proper stackwalking of RuntimeStub frame
3053 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60}
3054 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
3056 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
3057 __ movdqu(xmm_result, Address(from, 0)); // get 16 bytes of input
3059 // For encryption, the java expanded key ordering is just what we need
3060 // we don't know if the key is aligned, hence not using load-execute form
3062 load_key(xmm_temp1, key, 0x00, xmm_key_shuf_mask);
3063 __ pxor(xmm_result, xmm_temp1);
3065 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask);
3066 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask);
3067 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask);
3068 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask);
3070 __ aesenc(xmm_result, xmm_temp1);
3071 __ aesenc(xmm_result, xmm_temp2);
3072 __ aesenc(xmm_result, xmm_temp3);
3073 __ aesenc(xmm_result, xmm_temp4);
3075 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask);
3076 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask);
3077 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask);
3078 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask);
3080 __ aesenc(xmm_result, xmm_temp1);
3081 __ aesenc(xmm_result, xmm_temp2);
3082 __ aesenc(xmm_result, xmm_temp3);
3083 __ aesenc(xmm_result, xmm_temp4);
3085 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask);
3086 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask);
3088 __ cmpl(keylen, 44);
3089 __ jccb(Assembler::equal, L_doLast);
3091 __ aesenc(xmm_result, xmm_temp1);
3092 __ aesenc(xmm_result, xmm_temp2);
3094 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask);
3095 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask);
3097 __ cmpl(keylen, 52);
3098 __ jccb(Assembler::equal, L_doLast);
3100 __ aesenc(xmm_result, xmm_temp1);
3101 __ aesenc(xmm_result, xmm_temp2);
3103 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask);
3104 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask);
3106 __ BIND(L_doLast);
3107 __ aesenc(xmm_result, xmm_temp1);
3108 __ aesenclast(xmm_result, xmm_temp2);
3109 __ movdqu(Address(to, 0), xmm_result); // store the result
3110 __ xorptr(rax, rax); // return 0
3111 __ leave(); // required for proper stackwalking of RuntimeStub frame
3112 __ ret(0);
3114 return start;
3115 }
3118 // Arguments:
3119 //
3120 // Inputs:
3121 // c_rarg0 - source byte array address
3122 // c_rarg1 - destination byte array address
3123 // c_rarg2 - K (key) in little endian int array
3124 //
3125 address generate_aescrypt_decryptBlock() {
3126 assert(UseAES, "need AES instructions and misaligned SSE support");
3127 __ align(CodeEntryAlignment);
3128 StubCodeMark mark(this, "StubRoutines", "aescrypt_decryptBlock");
3129 Label L_doLast;
3130 address start = __ pc();
3132 const Register from = c_rarg0; // source array address
3133 const Register to = c_rarg1; // destination array address
3134 const Register key = c_rarg2; // key array address
3135 const Register keylen = rax;
3137 const XMMRegister xmm_result = xmm0;
3138 const XMMRegister xmm_key_shuf_mask = xmm1;
3139 // On win64 xmm6-xmm15 must be preserved so don't use them.
3140 const XMMRegister xmm_temp1 = xmm2;
3141 const XMMRegister xmm_temp2 = xmm3;
3142 const XMMRegister xmm_temp3 = xmm4;
3143 const XMMRegister xmm_temp4 = xmm5;
3145 __ enter(); // required for proper stackwalking of RuntimeStub frame
3147 // keylen could be only {11, 13, 15} * 4 = {44, 52, 60}
3148 __ movl(keylen, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
3150 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
3151 __ movdqu(xmm_result, Address(from, 0));
3153 // for decryption java expanded key ordering is rotated one position from what we want
3154 // so we start from 0x10 here and hit 0x00 last
3155 // we don't know if the key is aligned, hence not using load-execute form
3156 load_key(xmm_temp1, key, 0x10, xmm_key_shuf_mask);
3157 load_key(xmm_temp2, key, 0x20, xmm_key_shuf_mask);
3158 load_key(xmm_temp3, key, 0x30, xmm_key_shuf_mask);
3159 load_key(xmm_temp4, key, 0x40, xmm_key_shuf_mask);
3161 __ pxor (xmm_result, xmm_temp1);
3162 __ aesdec(xmm_result, xmm_temp2);
3163 __ aesdec(xmm_result, xmm_temp3);
3164 __ aesdec(xmm_result, xmm_temp4);
3166 load_key(xmm_temp1, key, 0x50, xmm_key_shuf_mask);
3167 load_key(xmm_temp2, key, 0x60, xmm_key_shuf_mask);
3168 load_key(xmm_temp3, key, 0x70, xmm_key_shuf_mask);
3169 load_key(xmm_temp4, key, 0x80, xmm_key_shuf_mask);
3171 __ aesdec(xmm_result, xmm_temp1);
3172 __ aesdec(xmm_result, xmm_temp2);
3173 __ aesdec(xmm_result, xmm_temp3);
3174 __ aesdec(xmm_result, xmm_temp4);
3176 load_key(xmm_temp1, key, 0x90, xmm_key_shuf_mask);
3177 load_key(xmm_temp2, key, 0xa0, xmm_key_shuf_mask);
3178 load_key(xmm_temp3, key, 0x00, xmm_key_shuf_mask);
3180 __ cmpl(keylen, 44);
3181 __ jccb(Assembler::equal, L_doLast);
3183 __ aesdec(xmm_result, xmm_temp1);
3184 __ aesdec(xmm_result, xmm_temp2);
3186 load_key(xmm_temp1, key, 0xb0, xmm_key_shuf_mask);
3187 load_key(xmm_temp2, key, 0xc0, xmm_key_shuf_mask);
3189 __ cmpl(keylen, 52);
3190 __ jccb(Assembler::equal, L_doLast);
3192 __ aesdec(xmm_result, xmm_temp1);
3193 __ aesdec(xmm_result, xmm_temp2);
3195 load_key(xmm_temp1, key, 0xd0, xmm_key_shuf_mask);
3196 load_key(xmm_temp2, key, 0xe0, xmm_key_shuf_mask);
3198 __ BIND(L_doLast);
3199 __ aesdec(xmm_result, xmm_temp1);
3200 __ aesdec(xmm_result, xmm_temp2);
3202 // for decryption the aesdeclast operation is always on key+0x00
3203 __ aesdeclast(xmm_result, xmm_temp3);
3204 __ movdqu(Address(to, 0), xmm_result); // store the result
3205 __ xorptr(rax, rax); // return 0
3206 __ leave(); // required for proper stackwalking of RuntimeStub frame
3207 __ ret(0);
3209 return start;
3210 }
3213 // Arguments:
3214 //
3215 // Inputs:
3216 // c_rarg0 - source byte array address
3217 // c_rarg1 - destination byte array address
3218 // c_rarg2 - K (key) in little endian int array
3219 // c_rarg3 - r vector byte array address
3220 // c_rarg4 - input length
3221 //
3222 // Output:
3223 // rax - input length
3224 //
3225 address generate_cipherBlockChaining_encryptAESCrypt() {
3226 assert(UseAES, "need AES instructions and misaligned SSE support");
3227 __ align(CodeEntryAlignment);
3228 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_encryptAESCrypt");
3229 address start = __ pc();
3231 Label L_exit, L_key_192_256, L_key_256, L_loopTop_128, L_loopTop_192, L_loopTop_256;
3232 const Register from = c_rarg0; // source array address
3233 const Register to = c_rarg1; // destination array address
3234 const Register key = c_rarg2; // key array address
3235 const Register rvec = c_rarg3; // r byte array initialized from initvector array address
3236 // and left with the results of the last encryption block
3237 #ifndef _WIN64
3238 const Register len_reg = c_rarg4; // src len (must be multiple of blocksize 16)
3239 #else
3240 const Address len_mem(rbp, 6 * wordSize); // length is on stack on Win64
3241 const Register len_reg = r10; // pick the first volatile windows register
3242 #endif
3243 const Register pos = rax;
3245 // xmm register assignments for the loops below
3246 const XMMRegister xmm_result = xmm0;
3247 const XMMRegister xmm_temp = xmm1;
3248 // keys 0-10 preloaded into xmm2-xmm12
3249 const int XMM_REG_NUM_KEY_FIRST = 2;
3250 const int XMM_REG_NUM_KEY_LAST = 15;
3251 const XMMRegister xmm_key0 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST);
3252 const XMMRegister xmm_key10 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST+10);
3253 const XMMRegister xmm_key11 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST+11);
3254 const XMMRegister xmm_key12 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST+12);
3255 const XMMRegister xmm_key13 = as_XMMRegister(XMM_REG_NUM_KEY_FIRST+13);
3257 __ enter(); // required for proper stackwalking of RuntimeStub frame
3259 #ifdef _WIN64
3260 // on win64, fill len_reg from stack position
3261 __ movl(len_reg, len_mem);
3262 // save the xmm registers which must be preserved 6-15
3263 __ subptr(rsp, -rsp_after_call_off * wordSize);
3264 for (int i = 6; i <= XMM_REG_NUM_KEY_LAST; i++) {
3265 __ movdqu(xmm_save(i), as_XMMRegister(i));
3266 }
3267 #else
3268 __ push(len_reg); // Save
3269 #endif
3271 const XMMRegister xmm_key_shuf_mask = xmm_temp; // used temporarily to swap key bytes up front
3272 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
3273 // load up xmm regs xmm2 thru xmm12 with key 0x00 - 0xa0
3274 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x00; rnum <= XMM_REG_NUM_KEY_FIRST+10; rnum++) {
3275 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask);
3276 offset += 0x10;
3277 }
3278 __ movdqu(xmm_result, Address(rvec, 0x00)); // initialize xmm_result with r vec
3280 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256))
3281 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
3282 __ cmpl(rax, 44);
3283 __ jcc(Assembler::notEqual, L_key_192_256);
3285 // 128 bit code follows here
3286 __ movptr(pos, 0);
3287 __ align(OptoLoopAlignment);
3289 __ BIND(L_loopTop_128);
3290 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
3291 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
3292 __ pxor (xmm_result, xmm_key0); // do the aes rounds
3293 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_FIRST + 9; rnum++) {
3294 __ aesenc(xmm_result, as_XMMRegister(rnum));
3295 }
3296 __ aesenclast(xmm_result, xmm_key10);
3297 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3298 // no need to store r to memory until we exit
3299 __ addptr(pos, AESBlockSize);
3300 __ subptr(len_reg, AESBlockSize);
3301 __ jcc(Assembler::notEqual, L_loopTop_128);
3303 __ BIND(L_exit);
3304 __ movdqu(Address(rvec, 0), xmm_result); // final value of r stored in rvec of CipherBlockChaining object
3306 #ifdef _WIN64
3307 // restore xmm regs belonging to calling function
3308 for (int i = 6; i <= XMM_REG_NUM_KEY_LAST; i++) {
3309 __ movdqu(as_XMMRegister(i), xmm_save(i));
3310 }
3311 __ movl(rax, len_mem);
3312 #else
3313 __ pop(rax); // return length
3314 #endif
3315 __ leave(); // required for proper stackwalking of RuntimeStub frame
3316 __ ret(0);
3318 __ BIND(L_key_192_256);
3319 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256)
3320 load_key(xmm_key11, key, 0xb0, xmm_key_shuf_mask);
3321 load_key(xmm_key12, key, 0xc0, xmm_key_shuf_mask);
3322 __ cmpl(rax, 52);
3323 __ jcc(Assembler::notEqual, L_key_256);
3325 // 192-bit code follows here (could be changed to use more xmm registers)
3326 __ movptr(pos, 0);
3327 __ align(OptoLoopAlignment);
3329 __ BIND(L_loopTop_192);
3330 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
3331 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
3332 __ pxor (xmm_result, xmm_key0); // do the aes rounds
3333 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_FIRST + 11; rnum++) {
3334 __ aesenc(xmm_result, as_XMMRegister(rnum));
3335 }
3336 __ aesenclast(xmm_result, xmm_key12);
3337 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3338 // no need to store r to memory until we exit
3339 __ addptr(pos, AESBlockSize);
3340 __ subptr(len_reg, AESBlockSize);
3341 __ jcc(Assembler::notEqual, L_loopTop_192);
3342 __ jmp(L_exit);
3344 __ BIND(L_key_256);
3345 // 256-bit code follows here (could be changed to use more xmm registers)
3346 load_key(xmm_key13, key, 0xd0, xmm_key_shuf_mask);
3347 __ movptr(pos, 0);
3348 __ align(OptoLoopAlignment);
3350 __ BIND(L_loopTop_256);
3351 __ movdqu(xmm_temp, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of input
3352 __ pxor (xmm_result, xmm_temp); // xor with the current r vector
3353 __ pxor (xmm_result, xmm_key0); // do the aes rounds
3354 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_FIRST + 13; rnum++) {
3355 __ aesenc(xmm_result, as_XMMRegister(rnum));
3356 }
3357 load_key(xmm_temp, key, 0xe0);
3358 __ aesenclast(xmm_result, xmm_temp);
3359 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3360 // no need to store r to memory until we exit
3361 __ addptr(pos, AESBlockSize);
3362 __ subptr(len_reg, AESBlockSize);
3363 __ jcc(Assembler::notEqual, L_loopTop_256);
3364 __ jmp(L_exit);
3366 return start;
3367 }
3369 // Safefetch stubs.
3370 void generate_safefetch(const char* name, int size, address* entry,
3371 address* fault_pc, address* continuation_pc) {
3372 // safefetch signatures:
3373 // int SafeFetch32(int* adr, int errValue);
3374 // intptr_t SafeFetchN (intptr_t* adr, intptr_t errValue);
3375 //
3376 // arguments:
3377 // c_rarg0 = adr
3378 // c_rarg1 = errValue
3379 //
3380 // result:
3381 // PPC_RET = *adr or errValue
3383 StubCodeMark mark(this, "StubRoutines", name);
3385 // Entry point, pc or function descriptor.
3386 *entry = __ pc();
3388 // Load *adr into c_rarg1, may fault.
3389 *fault_pc = __ pc();
3390 switch (size) {
3391 case 4:
3392 // int32_t
3393 __ movl(c_rarg1, Address(c_rarg0, 0));
3394 break;
3395 case 8:
3396 // int64_t
3397 __ movq(c_rarg1, Address(c_rarg0, 0));
3398 break;
3399 default:
3400 ShouldNotReachHere();
3401 }
3403 // return errValue or *adr
3404 *continuation_pc = __ pc();
3405 __ movq(rax, c_rarg1);
3406 __ ret(0);
3407 }
3409 // This is a version of CBC/AES Decrypt which does 4 blocks in a loop at a time
3410 // to hide instruction latency
3411 //
3412 // Arguments:
3413 //
3414 // Inputs:
3415 // c_rarg0 - source byte array address
3416 // c_rarg1 - destination byte array address
3417 // c_rarg2 - K (key) in little endian int array
3418 // c_rarg3 - r vector byte array address
3419 // c_rarg4 - input length
3420 //
3421 // Output:
3422 // rax - input length
3423 //
3425 address generate_cipherBlockChaining_decryptAESCrypt_Parallel() {
3426 assert(UseAES, "need AES instructions and misaligned SSE support");
3427 __ align(CodeEntryAlignment);
3428 StubCodeMark mark(this, "StubRoutines", "cipherBlockChaining_decryptAESCrypt");
3429 address start = __ pc();
3431 Label L_exit, L_key_192_256, L_key_256;
3432 Label L_singleBlock_loopTop_128, L_multiBlock_loopTop_128;
3433 Label L_singleBlock_loopTop_192, L_singleBlock_loopTop_256;
3434 const Register from = c_rarg0; // source array address
3435 const Register to = c_rarg1; // destination array address
3436 const Register key = c_rarg2; // key array address
3437 const Register rvec = c_rarg3; // r byte array initialized from initvector array address
3438 // and left with the results of the last encryption block
3439 #ifndef _WIN64
3440 const Register len_reg = c_rarg4; // src len (must be multiple of blocksize 16)
3441 #else
3442 const Address len_mem(rbp, 6 * wordSize); // length is on stack on Win64
3443 const Register len_reg = r10; // pick the first volatile windows register
3444 #endif
3445 const Register pos = rax;
3447 // keys 0-10 preloaded into xmm2-xmm12
3448 const int XMM_REG_NUM_KEY_FIRST = 5;
3449 const int XMM_REG_NUM_KEY_LAST = 15;
3450 const XMMRegister xmm_key_first = as_XMMRegister(XMM_REG_NUM_KEY_FIRST);
3451 const XMMRegister xmm_key_last = as_XMMRegister(XMM_REG_NUM_KEY_LAST);
3453 __ enter(); // required for proper stackwalking of RuntimeStub frame
3455 #ifdef _WIN64
3456 // on win64, fill len_reg from stack position
3457 __ movl(len_reg, len_mem);
3458 // save the xmm registers which must be preserved 6-15
3459 __ subptr(rsp, -rsp_after_call_off * wordSize);
3460 for (int i = 6; i <= XMM_REG_NUM_KEY_LAST; i++) {
3461 __ movdqu(xmm_save(i), as_XMMRegister(i));
3462 }
3463 #else
3464 __ push(len_reg); // Save
3465 #endif
3467 // the java expanded key ordering is rotated one position from what we want
3468 // so we start from 0x10 here and hit 0x00 last
3469 const XMMRegister xmm_key_shuf_mask = xmm1; // used temporarily to swap key bytes up front
3470 __ movdqu(xmm_key_shuf_mask, ExternalAddress(StubRoutines::x86::key_shuffle_mask_addr()));
3471 // load up xmm regs 5 thru 15 with key 0x10 - 0xa0 - 0x00
3472 for (int rnum = XMM_REG_NUM_KEY_FIRST, offset = 0x10; rnum < XMM_REG_NUM_KEY_LAST; rnum++) {
3473 load_key(as_XMMRegister(rnum), key, offset, xmm_key_shuf_mask);
3474 offset += 0x10;
3475 }
3476 load_key(xmm_key_last, key, 0x00, xmm_key_shuf_mask);
3478 const XMMRegister xmm_prev_block_cipher = xmm1; // holds cipher of previous block
3480 // registers holding the four results in the parallelized loop
3481 const XMMRegister xmm_result0 = xmm0;
3482 const XMMRegister xmm_result1 = xmm2;
3483 const XMMRegister xmm_result2 = xmm3;
3484 const XMMRegister xmm_result3 = xmm4;
3486 __ movdqu(xmm_prev_block_cipher, Address(rvec, 0x00)); // initialize with initial rvec
3488 // now split to different paths depending on the keylen (len in ints of AESCrypt.KLE array (52=192, or 60=256))
3489 __ movl(rax, Address(key, arrayOopDesc::length_offset_in_bytes() - arrayOopDesc::base_offset_in_bytes(T_INT)));
3490 __ cmpl(rax, 44);
3491 __ jcc(Assembler::notEqual, L_key_192_256);
3494 // 128-bit code follows here, parallelized
3495 __ movptr(pos, 0);
3496 __ align(OptoLoopAlignment);
3497 __ BIND(L_multiBlock_loopTop_128);
3498 __ cmpptr(len_reg, 4*AESBlockSize); // see if at least 4 blocks left
3499 __ jcc(Assembler::less, L_singleBlock_loopTop_128);
3501 __ movdqu(xmm_result0, Address(from, pos, Address::times_1, 0*AESBlockSize)); // get next 4 blocks into xmmresult registers
3502 __ movdqu(xmm_result1, Address(from, pos, Address::times_1, 1*AESBlockSize));
3503 __ movdqu(xmm_result2, Address(from, pos, Address::times_1, 2*AESBlockSize));
3504 __ movdqu(xmm_result3, Address(from, pos, Address::times_1, 3*AESBlockSize));
3506 #define DoFour(opc, src_reg) \
3507 __ opc(xmm_result0, src_reg); \
3508 __ opc(xmm_result1, src_reg); \
3509 __ opc(xmm_result2, src_reg); \
3510 __ opc(xmm_result3, src_reg);
3512 DoFour(pxor, xmm_key_first);
3513 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST - 1; rnum++) {
3514 DoFour(aesdec, as_XMMRegister(rnum));
3515 }
3516 DoFour(aesdeclast, xmm_key_last);
3517 // for each result, xor with the r vector of previous cipher block
3518 __ pxor(xmm_result0, xmm_prev_block_cipher);
3519 __ movdqu(xmm_prev_block_cipher, Address(from, pos, Address::times_1, 0*AESBlockSize));
3520 __ pxor(xmm_result1, xmm_prev_block_cipher);
3521 __ movdqu(xmm_prev_block_cipher, Address(from, pos, Address::times_1, 1*AESBlockSize));
3522 __ pxor(xmm_result2, xmm_prev_block_cipher);
3523 __ movdqu(xmm_prev_block_cipher, Address(from, pos, Address::times_1, 2*AESBlockSize));
3524 __ pxor(xmm_result3, xmm_prev_block_cipher);
3525 __ movdqu(xmm_prev_block_cipher, Address(from, pos, Address::times_1, 3*AESBlockSize)); // this will carry over to next set of blocks
3527 __ movdqu(Address(to, pos, Address::times_1, 0*AESBlockSize), xmm_result0); // store 4 results into the next 64 bytes of output
3528 __ movdqu(Address(to, pos, Address::times_1, 1*AESBlockSize), xmm_result1);
3529 __ movdqu(Address(to, pos, Address::times_1, 2*AESBlockSize), xmm_result2);
3530 __ movdqu(Address(to, pos, Address::times_1, 3*AESBlockSize), xmm_result3);
3532 __ addptr(pos, 4*AESBlockSize);
3533 __ subptr(len_reg, 4*AESBlockSize);
3534 __ jmp(L_multiBlock_loopTop_128);
3536 // registers used in the non-parallelized loops
3537 // xmm register assignments for the loops below
3538 const XMMRegister xmm_result = xmm0;
3539 const XMMRegister xmm_prev_block_cipher_save = xmm2;
3540 const XMMRegister xmm_key11 = xmm3;
3541 const XMMRegister xmm_key12 = xmm4;
3542 const XMMRegister xmm_temp = xmm4;
3544 __ align(OptoLoopAlignment);
3545 __ BIND(L_singleBlock_loopTop_128);
3546 __ cmpptr(len_reg, 0); // any blocks left??
3547 __ jcc(Assembler::equal, L_exit);
3548 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
3549 __ movdqa(xmm_prev_block_cipher_save, xmm_result); // save for next r vector
3550 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
3551 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST - 1; rnum++) {
3552 __ aesdec(xmm_result, as_XMMRegister(rnum));
3553 }
3554 __ aesdeclast(xmm_result, xmm_key_last);
3555 __ pxor (xmm_result, xmm_prev_block_cipher); // xor with the current r vector
3556 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3557 // no need to store r to memory until we exit
3558 __ movdqa(xmm_prev_block_cipher, xmm_prev_block_cipher_save); // set up next r vector with cipher input from this block
3560 __ addptr(pos, AESBlockSize);
3561 __ subptr(len_reg, AESBlockSize);
3562 __ jmp(L_singleBlock_loopTop_128);
3565 __ BIND(L_exit);
3566 __ movdqu(Address(rvec, 0), xmm_prev_block_cipher); // final value of r stored in rvec of CipherBlockChaining object
3567 #ifdef _WIN64
3568 // restore regs belonging to calling function
3569 for (int i = 6; i <= XMM_REG_NUM_KEY_LAST; i++) {
3570 __ movdqu(as_XMMRegister(i), xmm_save(i));
3571 }
3572 __ movl(rax, len_mem);
3573 #else
3574 __ pop(rax); // return length
3575 #endif
3576 __ leave(); // required for proper stackwalking of RuntimeStub frame
3577 __ ret(0);
3580 __ BIND(L_key_192_256);
3581 // here rax = len in ints of AESCrypt.KLE array (52=192, or 60=256)
3582 load_key(xmm_key11, key, 0xb0);
3583 __ cmpl(rax, 52);
3584 __ jcc(Assembler::notEqual, L_key_256);
3586 // 192-bit code follows here (could be optimized to use parallelism)
3587 load_key(xmm_key12, key, 0xc0); // 192-bit key goes up to c0
3588 __ movptr(pos, 0);
3589 __ align(OptoLoopAlignment);
3591 __ BIND(L_singleBlock_loopTop_192);
3592 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
3593 __ movdqa(xmm_prev_block_cipher_save, xmm_result); // save for next r vector
3594 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
3595 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST - 1; rnum++) {
3596 __ aesdec(xmm_result, as_XMMRegister(rnum));
3597 }
3598 __ aesdec(xmm_result, xmm_key11);
3599 __ aesdec(xmm_result, xmm_key12);
3600 __ aesdeclast(xmm_result, xmm_key_last); // xmm15 always came from key+0
3601 __ pxor (xmm_result, xmm_prev_block_cipher); // xor with the current r vector
3602 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3603 // no need to store r to memory until we exit
3604 __ movdqa(xmm_prev_block_cipher, xmm_prev_block_cipher_save); // set up next r vector with cipher input from this block
3605 __ addptr(pos, AESBlockSize);
3606 __ subptr(len_reg, AESBlockSize);
3607 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_192);
3608 __ jmp(L_exit);
3610 __ BIND(L_key_256);
3611 // 256-bit code follows here (could be optimized to use parallelism)
3612 __ movptr(pos, 0);
3613 __ align(OptoLoopAlignment);
3615 __ BIND(L_singleBlock_loopTop_256);
3616 __ movdqu(xmm_result, Address(from, pos, Address::times_1, 0)); // get next 16 bytes of cipher input
3617 __ movdqa(xmm_prev_block_cipher_save, xmm_result); // save for next r vector
3618 __ pxor (xmm_result, xmm_key_first); // do the aes dec rounds
3619 for (int rnum = XMM_REG_NUM_KEY_FIRST + 1; rnum <= XMM_REG_NUM_KEY_LAST - 1; rnum++) {
3620 __ aesdec(xmm_result, as_XMMRegister(rnum));
3621 }
3622 __ aesdec(xmm_result, xmm_key11);
3623 load_key(xmm_temp, key, 0xc0);
3624 __ aesdec(xmm_result, xmm_temp);
3625 load_key(xmm_temp, key, 0xd0);
3626 __ aesdec(xmm_result, xmm_temp);
3627 load_key(xmm_temp, key, 0xe0); // 256-bit key goes up to e0
3628 __ aesdec(xmm_result, xmm_temp);
3629 __ aesdeclast(xmm_result, xmm_key_last); // xmm15 came from key+0
3630 __ pxor (xmm_result, xmm_prev_block_cipher); // xor with the current r vector
3631 __ movdqu(Address(to, pos, Address::times_1, 0), xmm_result); // store into the next 16 bytes of output
3632 // no need to store r to memory until we exit
3633 __ movdqa(xmm_prev_block_cipher, xmm_prev_block_cipher_save); // set up next r vector with cipher input from this block
3634 __ addptr(pos, AESBlockSize);
3635 __ subptr(len_reg, AESBlockSize);
3636 __ jcc(Assembler::notEqual,L_singleBlock_loopTop_256);
3637 __ jmp(L_exit);
3639 return start;
3640 }
3642 /**
3643 * Arguments:
3644 *
3645 * Inputs:
3646 * c_rarg0 - int crc
3647 * c_rarg1 - byte* buf
3648 * c_rarg2 - int length
3649 *
3650 * Ouput:
3651 * rax - int crc result
3652 */
3653 address generate_updateBytesCRC32() {
3654 assert(UseCRC32Intrinsics, "need AVX and CLMUL instructions");
3656 __ align(CodeEntryAlignment);
3657 StubCodeMark mark(this, "StubRoutines", "updateBytesCRC32");
3659 address start = __ pc();
3660 // Win64: rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...)
3661 // Unix: rdi, rsi, rdx, rcx, r8, r9 (c_rarg0, c_rarg1, ...)
3662 // rscratch1: r10
3663 const Register crc = c_rarg0; // crc
3664 const Register buf = c_rarg1; // source java byte array address
3665 const Register len = c_rarg2; // length
3666 const Register table = c_rarg3; // crc_table address (reuse register)
3667 const Register tmp = r11;
3668 assert_different_registers(crc, buf, len, table, tmp, rax);
3670 BLOCK_COMMENT("Entry:");
3671 __ enter(); // required for proper stackwalking of RuntimeStub frame
3673 __ kernel_crc32(crc, buf, len, table, tmp);
3675 __ movl(rax, crc);
3676 __ leave(); // required for proper stackwalking of RuntimeStub frame
3677 __ ret(0);
3679 return start;
3680 }
3683 /**
3684 * Arguments:
3685 *
3686 * Input:
3687 * c_rarg0 - x address
3688 * c_rarg1 - x length
3689 * c_rarg2 - y address
3690 * c_rarg3 - y lenth
3691 * not Win64
3692 * c_rarg4 - z address
3693 * c_rarg5 - z length
3694 * Win64
3695 * rsp+40 - z address
3696 * rsp+48 - z length
3697 */
3698 address generate_multiplyToLen() {
3699 __ align(CodeEntryAlignment);
3700 StubCodeMark mark(this, "StubRoutines", "multiplyToLen");
3702 address start = __ pc();
3703 // Win64: rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...)
3704 // Unix: rdi, rsi, rdx, rcx, r8, r9 (c_rarg0, c_rarg1, ...)
3705 const Register x = rdi;
3706 const Register xlen = rax;
3707 const Register y = rsi;
3708 const Register ylen = rcx;
3709 const Register z = r8;
3710 const Register zlen = r11;
3712 // Next registers will be saved on stack in multiply_to_len().
3713 const Register tmp1 = r12;
3714 const Register tmp2 = r13;
3715 const Register tmp3 = r14;
3716 const Register tmp4 = r15;
3717 const Register tmp5 = rbx;
3719 BLOCK_COMMENT("Entry:");
3720 __ enter(); // required for proper stackwalking of RuntimeStub frame
3722 #ifndef _WIN64
3723 __ movptr(zlen, r9); // Save r9 in r11 - zlen
3724 #endif
3725 setup_arg_regs(4); // x => rdi, xlen => rsi, y => rdx
3726 // ylen => rcx, z => r8, zlen => r11
3727 // r9 and r10 may be used to save non-volatile registers
3728 #ifdef _WIN64
3729 // last 2 arguments (#4, #5) are on stack on Win64
3730 __ movptr(z, Address(rsp, 6 * wordSize));
3731 __ movptr(zlen, Address(rsp, 7 * wordSize));
3732 #endif
3734 __ movptr(xlen, rsi);
3735 __ movptr(y, rdx);
3736 __ multiply_to_len(x, xlen, y, ylen, z, zlen, tmp1, tmp2, tmp3, tmp4, tmp5);
3738 restore_arg_regs();
3740 __ leave(); // required for proper stackwalking of RuntimeStub frame
3741 __ ret(0);
3743 return start;
3744 }
3746 /**
3747 * Arguments:
3748 *
3749 // Input:
3750 // c_rarg0 - x address
3751 // c_rarg1 - x length
3752 // c_rarg2 - z address
3753 // c_rarg3 - z lenth
3754 *
3755 */
3756 address generate_squareToLen() {
3758 __ align(CodeEntryAlignment);
3759 StubCodeMark mark(this, "StubRoutines", "squareToLen");
3761 address start = __ pc();
3762 // Win64: rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...)
3763 // Unix: rdi, rsi, rdx, rcx (c_rarg0, c_rarg1, ...)
3764 const Register x = rdi;
3765 const Register len = rsi;
3766 const Register z = r8;
3767 const Register zlen = rcx;
3769 const Register tmp1 = r12;
3770 const Register tmp2 = r13;
3771 const Register tmp3 = r14;
3772 const Register tmp4 = r15;
3773 const Register tmp5 = rbx;
3775 BLOCK_COMMENT("Entry:");
3776 __ enter(); // required for proper stackwalking of RuntimeStub frame
3778 setup_arg_regs(4); // x => rdi, len => rsi, z => rdx
3779 // zlen => rcx
3780 // r9 and r10 may be used to save non-volatile registers
3781 __ movptr(r8, rdx);
3782 __ square_to_len(x, len, z, zlen, tmp1, tmp2, tmp3, tmp4, tmp5, rdx, rax);
3784 restore_arg_regs();
3786 __ leave(); // required for proper stackwalking of RuntimeStub frame
3787 __ ret(0);
3789 return start;
3790 }
3792 /**
3793 * Arguments:
3794 *
3795 * Input:
3796 * c_rarg0 - out address
3797 * c_rarg1 - in address
3798 * c_rarg2 - offset
3799 * c_rarg3 - len
3800 * not Win64
3801 * c_rarg4 - k
3802 * Win64
3803 * rsp+40 - k
3804 */
3805 address generate_mulAdd() {
3806 __ align(CodeEntryAlignment);
3807 StubCodeMark mark(this, "StubRoutines", "mulAdd");
3809 address start = __ pc();
3810 // Win64: rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...)
3811 // Unix: rdi, rsi, rdx, rcx, r8, r9 (c_rarg0, c_rarg1, ...)
3812 const Register out = rdi;
3813 const Register in = rsi;
3814 const Register offset = r11;
3815 const Register len = rcx;
3816 const Register k = r8;
3818 // Next registers will be saved on stack in mul_add().
3819 const Register tmp1 = r12;
3820 const Register tmp2 = r13;
3821 const Register tmp3 = r14;
3822 const Register tmp4 = r15;
3823 const Register tmp5 = rbx;
3825 BLOCK_COMMENT("Entry:");
3826 __ enter(); // required for proper stackwalking of RuntimeStub frame
3828 setup_arg_regs(4); // out => rdi, in => rsi, offset => rdx
3829 // len => rcx, k => r8
3830 // r9 and r10 may be used to save non-volatile registers
3831 #ifdef _WIN64
3832 // last argument is on stack on Win64
3833 __ movl(k, Address(rsp, 6 * wordSize));
3834 #endif
3835 __ movptr(r11, rdx); // move offset in rdx to offset(r11)
3836 __ mul_add(out, in, offset, len, k, tmp1, tmp2, tmp3, tmp4, tmp5, rdx, rax);
3838 restore_arg_regs();
3840 __ leave(); // required for proper stackwalking of RuntimeStub frame
3841 __ ret(0);
3843 return start;
3844 }
3847 #undef __
3848 #define __ masm->
3850 // Continuation point for throwing of implicit exceptions that are
3851 // not handled in the current activation. Fabricates an exception
3852 // oop and initiates normal exception dispatching in this
3853 // frame. Since we need to preserve callee-saved values (currently
3854 // only for C2, but done for C1 as well) we need a callee-saved oop
3855 // map and therefore have to make these stubs into RuntimeStubs
3856 // rather than BufferBlobs. If the compiler needs all registers to
3857 // be preserved between the fault point and the exception handler
3858 // then it must assume responsibility for that in
3859 // AbstractCompiler::continuation_for_implicit_null_exception or
3860 // continuation_for_implicit_division_by_zero_exception. All other
3861 // implicit exceptions (e.g., NullPointerException or
3862 // AbstractMethodError on entry) are either at call sites or
3863 // otherwise assume that stack unwinding will be initiated, so
3864 // caller saved registers were assumed volatile in the compiler.
3865 address generate_throw_exception(const char* name,
3866 address runtime_entry,
3867 Register arg1 = noreg,
3868 Register arg2 = noreg) {
3869 // Information about frame layout at time of blocking runtime call.
3870 // Note that we only have to preserve callee-saved registers since
3871 // the compilers are responsible for supplying a continuation point
3872 // if they expect all registers to be preserved.
3873 enum layout {
3874 rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,
3875 rbp_off2,
3876 return_off,
3877 return_off2,
3878 framesize // inclusive of return address
3879 };
3881 int insts_size = 512;
3882 int locs_size = 64;
3884 CodeBuffer code(name, insts_size, locs_size);
3885 OopMapSet* oop_maps = new OopMapSet();
3886 MacroAssembler* masm = new MacroAssembler(&code);
3888 address start = __ pc();
3890 // This is an inlined and slightly modified version of call_VM
3891 // which has the ability to fetch the return PC out of
3892 // thread-local storage and also sets up last_Java_sp slightly
3893 // differently than the real call_VM
3895 __ enter(); // required for proper stackwalking of RuntimeStub frame
3897 assert(is_even(framesize/2), "sp not 16-byte aligned");
3899 // return address and rbp are already in place
3900 __ subptr(rsp, (framesize-4) << LogBytesPerInt); // prolog
3902 int frame_complete = __ pc() - start;
3904 // Set up last_Java_sp and last_Java_fp
3905 address the_pc = __ pc();
3906 __ set_last_Java_frame(rsp, rbp, the_pc);
3907 __ andptr(rsp, -(StackAlignmentInBytes)); // Align stack
3909 // Call runtime
3910 if (arg1 != noreg) {
3911 assert(arg2 != c_rarg1, "clobbered");
3912 __ movptr(c_rarg1, arg1);
3913 }
3914 if (arg2 != noreg) {
3915 __ movptr(c_rarg2, arg2);
3916 }
3917 __ movptr(c_rarg0, r15_thread);
3918 BLOCK_COMMENT("call runtime_entry");
3919 __ call(RuntimeAddress(runtime_entry));
3921 // Generate oop map
3922 OopMap* map = new OopMap(framesize, 0);
3924 oop_maps->add_gc_map(the_pc - start, map);
3926 __ reset_last_Java_frame(true, true);
3928 __ leave(); // required for proper stackwalking of RuntimeStub frame
3930 // check for pending exceptions
3931 #ifdef ASSERT
3932 Label L;
3933 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()),
3934 (int32_t) NULL_WORD);
3935 __ jcc(Assembler::notEqual, L);
3936 __ should_not_reach_here();
3937 __ bind(L);
3938 #endif // ASSERT
3939 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3942 // codeBlob framesize is in words (not VMRegImpl::slot_size)
3943 RuntimeStub* stub =
3944 RuntimeStub::new_runtime_stub(name,
3945 &code,
3946 frame_complete,
3947 (framesize >> (LogBytesPerWord - LogBytesPerInt)),
3948 oop_maps, false);
3949 return stub->entry_point();
3950 }
3952 void create_control_words() {
3953 // Round to nearest, 53-bit mode, exceptions masked
3954 StubRoutines::_fpu_cntrl_wrd_std = 0x027F;
3955 // Round to zero, 53-bit mode, exception mased
3956 StubRoutines::_fpu_cntrl_wrd_trunc = 0x0D7F;
3957 // Round to nearest, 24-bit mode, exceptions masked
3958 StubRoutines::_fpu_cntrl_wrd_24 = 0x007F;
3959 // Round to nearest, 64-bit mode, exceptions masked
3960 StubRoutines::_fpu_cntrl_wrd_64 = 0x037F;
3961 // Round to nearest, 64-bit mode, exceptions masked
3962 StubRoutines::_mxcsr_std = 0x1F80;
3963 // Note: the following two constants are 80-bit values
3964 // layout is critical for correct loading by FPU.
3965 // Bias for strict fp multiply/divide
3966 StubRoutines::_fpu_subnormal_bias1[0]= 0x00000000; // 2^(-15360) == 0x03ff 8000 0000 0000 0000
3967 StubRoutines::_fpu_subnormal_bias1[1]= 0x80000000;
3968 StubRoutines::_fpu_subnormal_bias1[2]= 0x03ff;
3969 // Un-Bias for strict fp multiply/divide
3970 StubRoutines::_fpu_subnormal_bias2[0]= 0x00000000; // 2^(+15360) == 0x7bff 8000 0000 0000 0000
3971 StubRoutines::_fpu_subnormal_bias2[1]= 0x80000000;
3972 StubRoutines::_fpu_subnormal_bias2[2]= 0x7bff;
3973 }
3975 // Initialization
3976 void generate_initial() {
3977 // Generates all stubs and initializes the entry points
3979 // This platform-specific settings are needed by generate_call_stub()
3980 create_control_words();
3982 // entry points that exist in all platforms Note: This is code
3983 // that could be shared among different platforms - however the
3984 // benefit seems to be smaller than the disadvantage of having a
3985 // much more complicated generator structure. See also comment in
3986 // stubRoutines.hpp.
3988 StubRoutines::_forward_exception_entry = generate_forward_exception();
3990 StubRoutines::_call_stub_entry =
3991 generate_call_stub(StubRoutines::_call_stub_return_address);
3993 // is referenced by megamorphic call
3994 StubRoutines::_catch_exception_entry = generate_catch_exception();
3996 // atomic calls
3997 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg();
3998 StubRoutines::_atomic_xchg_ptr_entry = generate_atomic_xchg_ptr();
3999 StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg();
4000 StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long();
4001 StubRoutines::_atomic_add_entry = generate_atomic_add();
4002 StubRoutines::_atomic_add_ptr_entry = generate_atomic_add_ptr();
4003 StubRoutines::_fence_entry = generate_orderaccess_fence();
4005 StubRoutines::_handler_for_unsafe_access_entry =
4006 generate_handler_for_unsafe_access();
4008 // platform dependent
4009 StubRoutines::x86::_get_previous_fp_entry = generate_get_previous_fp();
4010 StubRoutines::x86::_get_previous_sp_entry = generate_get_previous_sp();
4012 StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr();
4014 // Build this early so it's available for the interpreter.
4015 StubRoutines::_throw_StackOverflowError_entry =
4016 generate_throw_exception("StackOverflowError throw_exception",
4017 CAST_FROM_FN_PTR(address,
4018 SharedRuntime::
4019 throw_StackOverflowError));
4020 if (UseCRC32Intrinsics) {
4021 // set table address before stub generation which use it
4022 StubRoutines::_crc_table_adr = (address)StubRoutines::x86::_crc_table;
4023 StubRoutines::_updateBytesCRC32 = generate_updateBytesCRC32();
4024 }
4025 }
4027 void generate_all() {
4028 // Generates all stubs and initializes the entry points
4030 // These entry points require SharedInfo::stack0 to be set up in
4031 // non-core builds and need to be relocatable, so they each
4032 // fabricate a RuntimeStub internally.
4033 StubRoutines::_throw_AbstractMethodError_entry =
4034 generate_throw_exception("AbstractMethodError throw_exception",
4035 CAST_FROM_FN_PTR(address,
4036 SharedRuntime::
4037 throw_AbstractMethodError));
4039 StubRoutines::_throw_IncompatibleClassChangeError_entry =
4040 generate_throw_exception("IncompatibleClassChangeError throw_exception",
4041 CAST_FROM_FN_PTR(address,
4042 SharedRuntime::
4043 throw_IncompatibleClassChangeError));
4045 StubRoutines::_throw_NullPointerException_at_call_entry =
4046 generate_throw_exception("NullPointerException at call throw_exception",
4047 CAST_FROM_FN_PTR(address,
4048 SharedRuntime::
4049 throw_NullPointerException_at_call));
4051 // entry points that are platform specific
4052 StubRoutines::x86::_f2i_fixup = generate_f2i_fixup();
4053 StubRoutines::x86::_f2l_fixup = generate_f2l_fixup();
4054 StubRoutines::x86::_d2i_fixup = generate_d2i_fixup();
4055 StubRoutines::x86::_d2l_fixup = generate_d2l_fixup();
4057 StubRoutines::x86::_float_sign_mask = generate_fp_mask("float_sign_mask", 0x7FFFFFFF7FFFFFFF);
4058 StubRoutines::x86::_float_sign_flip = generate_fp_mask("float_sign_flip", 0x8000000080000000);
4059 StubRoutines::x86::_double_sign_mask = generate_fp_mask("double_sign_mask", 0x7FFFFFFFFFFFFFFF);
4060 StubRoutines::x86::_double_sign_flip = generate_fp_mask("double_sign_flip", 0x8000000000000000);
4062 // support for verify_oop (must happen after universe_init)
4063 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop();
4065 // arraycopy stubs used by compilers
4066 generate_arraycopy_stubs();
4068 generate_math_stubs();
4070 // don't bother generating these AES intrinsic stubs unless global flag is set
4071 if (UseAESIntrinsics) {
4072 StubRoutines::x86::_key_shuffle_mask_addr = generate_key_shuffle_mask(); // needed by the others
4074 StubRoutines::_aescrypt_encryptBlock = generate_aescrypt_encryptBlock();
4075 StubRoutines::_aescrypt_decryptBlock = generate_aescrypt_decryptBlock();
4076 StubRoutines::_cipherBlockChaining_encryptAESCrypt = generate_cipherBlockChaining_encryptAESCrypt();
4077 StubRoutines::_cipherBlockChaining_decryptAESCrypt = generate_cipherBlockChaining_decryptAESCrypt_Parallel();
4078 }
4080 // Safefetch stubs.
4081 generate_safefetch("SafeFetch32", sizeof(int), &StubRoutines::_safefetch32_entry,
4082 &StubRoutines::_safefetch32_fault_pc,
4083 &StubRoutines::_safefetch32_continuation_pc);
4084 generate_safefetch("SafeFetchN", sizeof(intptr_t), &StubRoutines::_safefetchN_entry,
4085 &StubRoutines::_safefetchN_fault_pc,
4086 &StubRoutines::_safefetchN_continuation_pc);
4087 #ifdef COMPILER2
4088 if (UseMultiplyToLenIntrinsic) {
4089 StubRoutines::_multiplyToLen = generate_multiplyToLen();
4090 }
4091 if (UseSquareToLenIntrinsic) {
4092 StubRoutines::_squareToLen = generate_squareToLen();
4093 }
4094 if (UseMulAddIntrinsic) {
4095 StubRoutines::_mulAdd = generate_mulAdd();
4096 }
4097 #endif
4098 }
4100 public:
4101 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) {
4102 if (all) {
4103 generate_all();
4104 } else {
4105 generate_initial();
4106 }
4107 }
4108 }; // end class declaration
4110 void StubGenerator_generate(CodeBuffer* code, bool all) {
4111 StubGenerator g(code, all);
4112 }