Mercurial > jdk8-mips64-public > hotspot / file revision

 /*

  * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.

  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

  *

  * This code is free software; you can redistribute it and/or modify it

  * under the terms of the GNU General Public License version 2 only, as

  * published by the Free Software Foundation.

  *

  * This code is distributed in the hope that it will be useful, but WITHOUT

  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

  * version 2 for more details (a copy is included in the LICENSE file that

  * accompanied this code).

  *

  * You should have received a copy of the GNU General Public License version

  * 2 along with this work; if not, write to the Free Software Foundation,

  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

  *

  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

  * or visit www.oracle.com if you need additional information or have any

  * questions.

  *

  */

 # include "incls/_precompiled.incl"

 # include "incls/_vframeArray.cpp.incl"

 int vframeArrayElement:: bci(void) const { return (_bci == SynchronizationEntryBCI ? 0 : _bci); }

 void vframeArrayElement::free_monitors(JavaThread* jt) {

   if (_monitors != NULL) {

      MonitorChunk* chunk = _monitors;

      _monitors = NULL;

      jt->remove_monitor_chunk(chunk);

      delete chunk;

   }

 }

 void vframeArrayElement::fill_in(compiledVFrame* vf) {

 // Copy the information from the compiled vframe to the

 // interpreter frame we will be creating to replace vf

   _method = vf->method();

   _bci    = vf->raw_bci();

   _reexecute = vf->should_reexecute();

   int index;

   // Get the monitors off-stack

   GrowableArray<MonitorInfo*>* list = vf->monitors();

   if (list->is_empty()) {

     _monitors = NULL;

   } else {

     // Allocate monitor chunk

     _monitors = new MonitorChunk(list->length());

     vf->thread()->add_monitor_chunk(_monitors);

     // Migrate the BasicLocks from the stack to the monitor chunk

     for (index = 0; index < list->length(); index++) {

       MonitorInfo* monitor = list->at(index);

       assert(!monitor->owner_is_scalar_replaced(), "object should be reallocated already");

       assert(monitor->owner() == NULL || (!monitor->owner()->is_unlocked() && !monitor->owner()->has_bias_pattern()), "object must be null or locked, and unbiased");

       BasicObjectLock* dest = _monitors->at(index);

       dest->set_obj(monitor->owner());

       monitor->lock()->move_to(monitor->owner(), dest->lock());

     }

   }

   // Convert the vframe locals and expressions to off stack

   // values. Because we will not gc all oops can be converted to

   // intptr_t (i.e. a stack slot) and we are fine. This is

   // good since we are inside a HandleMark and the oops in our

   // collection would go away between packing them here and

   // unpacking them in unpack_on_stack.

   // First the locals go off-stack

   // FIXME this seems silly it creates a StackValueCollection

   // in order to get the size to then copy them and

   // convert the types to intptr_t size slots. Seems like it

   // could do it in place... Still uses less memory than the

   // old way though

   StackValueCollection *locs = vf->locals();

   _locals = new StackValueCollection(locs->size());

   for(index = 0; index < locs->size(); index++) {

     StackValue* value = locs->at(index);

     switch(value->type()) {

       case T_OBJECT:

         assert(!value->obj_is_scalar_replaced(), "object should be reallocated already");

         // preserve object type

         _locals->add( new StackValue((intptr_t) (value->get_obj()()), T_OBJECT ));

         break;

       case T_CONFLICT:

         // A dead local.  Will be initialized to null/zero.

         _locals->add( new StackValue());

         break;

       case T_INT:

         _locals->add( new StackValue(value->get_int()));

         break;

       default:

         ShouldNotReachHere();

     }

   }

   // Now the expressions off-stack

   // Same silliness as above

   StackValueCollection *exprs = vf->expressions();

   _expressions = new StackValueCollection(exprs->size());

   for(index = 0; index < exprs->size(); index++) {

     StackValue* value = exprs->at(index);

     switch(value->type()) {

       case T_OBJECT:

         assert(!value->obj_is_scalar_replaced(), "object should be reallocated already");

         // preserve object type

         _expressions->add( new StackValue((intptr_t) (value->get_obj()()), T_OBJECT ));

         break;

       case T_CONFLICT:

         // A dead stack element.  Will be initialized to null/zero.

         // This can occur when the compiler emits a state in which stack

         // elements are known to be dead (because of an imminent exception).

         _expressions->add( new StackValue());

         break;

       case T_INT:

         _expressions->add( new StackValue(value->get_int()));

         break;

       default:

         ShouldNotReachHere();

     }

   }

 }

 int unpack_counter = 0;

 void vframeArrayElement::unpack_on_stack(int callee_parameters,

                                          int callee_locals,

                                          frame* caller,

                                          bool is_top_frame,

                                          int exec_mode) {

   JavaThread* thread = (JavaThread*) Thread::current();

   // Look at bci and decide on bcp and continuation pc

   address bcp;

   // C++ interpreter doesn't need a pc since it will figure out what to do when it

   // begins execution

   address pc;

   bool use_next_mdp = false; // true if we should use the mdp associated with the next bci

                              // rather than the one associated with bcp

   if (raw_bci() == SynchronizationEntryBCI) {

     // We are deoptimizing while hanging in prologue code for synchronized method

     bcp = method()->bcp_from(0); // first byte code

     pc  = Interpreter::deopt_entry(vtos, 0); // step = 0 since we don't skip current bytecode

   } else if (should_reexecute()) { //reexecute this bytecode

     assert(is_top_frame, "reexecute allowed only for the top frame");

     bcp = method()->bcp_from(bci());

     pc  = Interpreter::deopt_reexecute_entry(method(), bcp);

   } else {

     bcp = method()->bcp_from(bci());

     pc  = Interpreter::deopt_continue_after_entry(method(), bcp, callee_parameters, is_top_frame);

     use_next_mdp = true;

   }

   assert(Bytecodes::is_defined(*bcp), "must be a valid bytecode");

   // Monitorenter and pending exceptions:

   //

   // For Compiler2, there should be no pending exception when deoptimizing at monitorenter

   // because there is no safepoint at the null pointer check (it is either handled explicitly

   // or prior to the monitorenter) and asynchronous exceptions are not made "pending" by the

   // runtime interface for the slow case (see JRT_ENTRY_FOR_MONITORENTER).  If an asynchronous

   // exception was processed, the bytecode pointer would have to be extended one bytecode beyond

   // the monitorenter to place it in the proper exception range.

   //

   // For Compiler1, deoptimization can occur while throwing a NullPointerException at monitorenter,

   // in which case bcp should point to the monitorenter since it is within the exception's range.

   assert(*bcp != Bytecodes::_monitorenter || is_top_frame, "a _monitorenter must be a top frame");

   // TIERED Must know the compiler of the deoptee QQQ

   COMPILER2_PRESENT(guarantee(*bcp != Bytecodes::_monitorenter || exec_mode != Deoptimization::Unpack_exception,

                               "shouldn't get exception during monitorenter");)

   int popframe_preserved_args_size_in_bytes = 0;

   int popframe_preserved_args_size_in_words = 0;

   if (is_top_frame) {

     JvmtiThreadState *state = thread->jvmti_thread_state();

     if (JvmtiExport::can_pop_frame() &&

         (thread->has_pending_popframe() || thread->popframe_forcing_deopt_reexecution())) {

       if (thread->has_pending_popframe()) {

         // Pop top frame after deoptimization

 #ifndef CC_INTERP

         pc = Interpreter::remove_activation_preserving_args_entry();

 #else

         // Do an uncommon trap type entry. c++ interpreter will know

         // to pop frame and preserve the args

         pc = Interpreter::deopt_entry(vtos, 0);

         use_next_mdp = false;

 #endif

       } else {

         // Reexecute invoke in top frame

         pc = Interpreter::deopt_entry(vtos, 0);

         use_next_mdp = false;

         popframe_preserved_args_size_in_bytes = in_bytes(thread->popframe_preserved_args_size());

         // Note: the PopFrame-related extension of the expression stack size is done in

         // Deoptimization::fetch_unroll_info_helper

         popframe_preserved_args_size_in_words = in_words(thread->popframe_preserved_args_size_in_words());

       }

     } else if (JvmtiExport::can_force_early_return() && state != NULL && state->is_earlyret_pending()) {

       // Force early return from top frame after deoptimization

 #ifndef CC_INTERP

       pc = Interpreter::remove_activation_early_entry(state->earlyret_tos());

 #else

      // TBD: Need to implement ForceEarlyReturn for CC_INTERP (ia64)

 #endif

     } else {

       // Possibly override the previous pc computation of the top (youngest) frame

       switch (exec_mode) {

       case Deoptimization::Unpack_deopt:

         // use what we've got

         break;

       case Deoptimization::Unpack_exception:

         // exception is pending

         pc = SharedRuntime::raw_exception_handler_for_return_address(thread, pc);

         // [phh] We're going to end up in some handler or other, so it doesn't

         // matter what mdp we point to.  See exception_handler_for_exception()

         // in interpreterRuntime.cpp.

         break;

       case Deoptimization::Unpack_uncommon_trap:

       case Deoptimization::Unpack_reexecute:

         // redo last byte code

         pc  = Interpreter::deopt_entry(vtos, 0);

         use_next_mdp = false;

         break;

       default:

         ShouldNotReachHere();

       }

     }

   }

   // Setup the interpreter frame

   assert(method() != NULL, "method must exist");

   int temps = expressions()->size();

   int locks = monitors() == NULL ? 0 : monitors()->number_of_monitors();

   Interpreter::layout_activation(method(),

                                  temps + callee_parameters,

                                  popframe_preserved_args_size_in_words,

                                  locks,

                                  callee_parameters,

                                  callee_locals,

                                  caller,

                                  iframe(),

                                  is_top_frame);

   // Update the pc in the frame object and overwrite the temporary pc

   // we placed in the skeletal frame now that we finally know the

   // exact interpreter address we should use.

   _frame.patch_pc(thread, pc);

   assert (!method()->is_synchronized() || locks > 0, "synchronized methods must have monitors");

   BasicObjectLock* top = iframe()->interpreter_frame_monitor_begin();

   for (int index = 0; index < locks; index++) {

     top = iframe()->previous_monitor_in_interpreter_frame(top);

     BasicObjectLock* src = _monitors->at(index);

     top->set_obj(src->obj());

     src->lock()->move_to(src->obj(), top->lock());

   }

   if (ProfileInterpreter) {

     iframe()->interpreter_frame_set_mdx(0); // clear out the mdp.

   }

   iframe()->interpreter_frame_set_bcx((intptr_t)bcp); // cannot use bcp because frame is not initialized yet

   if (ProfileInterpreter) {

     methodDataOop mdo = method()->method_data();

     if (mdo != NULL) {

       int bci = iframe()->interpreter_frame_bci();

       if (use_next_mdp) ++bci;

       address mdp = mdo->bci_to_dp(bci);

       iframe()->interpreter_frame_set_mdp(mdp);

     }

   }

   // Unpack expression stack

   // If this is an intermediate frame (i.e. not top frame) then this

   // only unpacks the part of the expression stack not used by callee

   // as parameters. The callee parameters are unpacked as part of the

   // callee locals.

   int i;

   for(i = 0; i < expressions()->size(); i++) {

     StackValue *value = expressions()->at(i);

     intptr_t*   addr  = iframe()->interpreter_frame_expression_stack_at(i);

     switch(value->type()) {

       case T_INT:

         *addr = value->get_int();

         break;

       case T_OBJECT:

         *addr = value->get_int(T_OBJECT);

         break;

       case T_CONFLICT:

         // A dead stack slot.  Initialize to null in case it is an oop.

         *addr = NULL_WORD;

         break;

       default:

         ShouldNotReachHere();

     }

   }

   // Unpack the locals

   for(i = 0; i < locals()->size(); i++) {

     StackValue *value = locals()->at(i);

     intptr_t* addr  = iframe()->interpreter_frame_local_at(i);

     switch(value->type()) {

       case T_INT:

         *addr = value->get_int();

         break;

       case T_OBJECT:

         *addr = value->get_int(T_OBJECT);

         break;

       case T_CONFLICT:

         // A dead location. If it is an oop then we need a NULL to prevent GC from following it

         *addr = NULL_WORD;

         break;

       default:

         ShouldNotReachHere();

     }

   }

   if (is_top_frame && JvmtiExport::can_pop_frame() && thread->popframe_forcing_deopt_reexecution()) {

     // An interpreted frame was popped but it returns to a deoptimized

     // frame. The incoming arguments to the interpreted activation

     // were preserved in thread-local storage by the

     // remove_activation_preserving_args_entry in the interpreter; now

     // we put them back into the just-unpacked interpreter frame.

     // Note that this assumes that the locals arena grows toward lower

     // addresses.

     if (popframe_preserved_args_size_in_words != 0) {

       void* saved_args = thread->popframe_preserved_args();

       assert(saved_args != NULL, "must have been saved by interpreter");

 #ifdef ASSERT

       assert(popframe_preserved_args_size_in_words <=

              iframe()->interpreter_frame_expression_stack_size()*Interpreter::stackElementWords,

              "expression stack size should have been extended");

 #endif // ASSERT

       int top_element = iframe()->interpreter_frame_expression_stack_size()-1;

       intptr_t* base;

       if (frame::interpreter_frame_expression_stack_direction() < 0) {

         base = iframe()->interpreter_frame_expression_stack_at(top_element);

       } else {

         base = iframe()->interpreter_frame_expression_stack();

       }

       Copy::conjoint_jbytes(saved_args,

                             base,

                             popframe_preserved_args_size_in_bytes);

       thread->popframe_free_preserved_args();

     }

   }

 #ifndef PRODUCT

   if (TraceDeoptimization && Verbose) {

     ttyLocker ttyl;

     tty->print_cr("[%d Interpreted Frame]", ++unpack_counter);

     iframe()->print_on(tty);

     RegisterMap map(thread);

     vframe* f = vframe::new_vframe(iframe(), &map, thread);

     f->print();

     tty->print_cr("locals size     %d", locals()->size());

     tty->print_cr("expression size %d", expressions()->size());

     method()->print_value();

     tty->cr();

     // method()->print_codes();

   } else if (TraceDeoptimization) {

     tty->print("     ");

     method()->print_value();

     Bytecodes::Code code = Bytecodes::java_code_at(bcp);

     int bci = method()->bci_from(bcp);

     tty->print(" - %s", Bytecodes::name(code));

     tty->print(" @ bci %d ", bci);

     tty->print_cr("sp = " PTR_FORMAT, iframe()->sp());

   }

 #endif // PRODUCT

   // The expression stack and locals are in the resource area don't leave

   // a dangling pointer in the vframeArray we leave around for debug

   // purposes

   _locals = _expressions = NULL;

 }

 int vframeArrayElement::on_stack_size(int callee_parameters,

                                       int callee_locals,

                                       bool is_top_frame,

                                       int popframe_extra_stack_expression_els) const {

   assert(method()->max_locals() == locals()->size(), "just checking");

   int locks = monitors() == NULL ? 0 : monitors()->number_of_monitors();

   int temps = expressions()->size();

   return Interpreter::size_activation(method(),

                                       temps + callee_parameters,

                                       popframe_extra_stack_expression_els,

                                       locks,

                                       callee_parameters,

                                       callee_locals,

                                       is_top_frame);

 }

 vframeArray* vframeArray::allocate(JavaThread* thread, int frame_size, GrowableArray<compiledVFrame*>* chunk,

                                    RegisterMap *reg_map, frame sender, frame caller, frame self) {

   // Allocate the vframeArray

   vframeArray * result = (vframeArray*) AllocateHeap(sizeof(vframeArray) + // fixed part

                                                      sizeof(vframeArrayElement) * (chunk->length() - 1), // variable part

                                                      "vframeArray::allocate");

   result->_frames = chunk->length();

   result->_owner_thread = thread;

   result->_sender = sender;

   result->_caller = caller;

   result->_original = self;

   result->set_unroll_block(NULL); // initialize it

   result->fill_in(thread, frame_size, chunk, reg_map);

   return result;

 }

 void vframeArray::fill_in(JavaThread* thread,

                           int frame_size,

                           GrowableArray<compiledVFrame*>* chunk,

                           const RegisterMap *reg_map) {

   // Set owner first, it is used when adding monitor chunks

   _frame_size = frame_size;

   for(int i = 0; i < chunk->length(); i++) {

     element(i)->fill_in(chunk->at(i));

   }

   // Copy registers for callee-saved registers

   if (reg_map != NULL) {

     for(int i = 0; i < RegisterMap::reg_count; i++) {

 #ifdef AMD64

       // The register map has one entry for every int (32-bit value), so

       // 64-bit physical registers have two entries in the map, one for

       // each half.  Ignore the high halves of 64-bit registers, just like

       // frame::oopmapreg_to_location does.

       //

       // [phh] FIXME: this is a temporary hack!  This code *should* work

       // correctly w/o this hack, possibly by changing RegisterMap::pd_location

       // in frame_amd64.cpp and the values of the phantom high half registers

       // in amd64.ad.

       //      if (VMReg::Name(i) < SharedInfo::stack0 && is_even(i)) {

         intptr_t* src = (intptr_t*) reg_map->location(VMRegImpl::as_VMReg(i));

         _callee_registers[i] = src != NULL ? *src : NULL_WORD;

         //      } else {

         //      jint* src = (jint*) reg_map->location(VMReg::Name(i));

         //      _callee_registers[i] = src != NULL ? *src : NULL_WORD;

         //      }

 #else

       jint* src = (jint*) reg_map->location(VMRegImpl::as_VMReg(i));

       _callee_registers[i] = src != NULL ? *src : NULL_WORD;

 #endif

       if (src == NULL) {

         set_location_valid(i, false);

       } else {

         set_location_valid(i, true);

         jint* dst = (jint*) register_location(i);

         *dst = *src;

       }

     }

   }

 }

 void vframeArray::unpack_to_stack(frame &unpack_frame, int exec_mode) {

   // stack picture

   //   unpack_frame

   //   [new interpreter frames ] (frames are skeletal but walkable)

   //   caller_frame

   //

   //  This routine fills in the missing data for the skeletal interpreter frames

   //  in the above picture.

   // Find the skeletal interpreter frames to unpack into

   RegisterMap map(JavaThread::current(), false);

   // Get the youngest frame we will unpack (last to be unpacked)

   frame me = unpack_frame.sender(&map);

   int index;

   for (index = 0; index < frames(); index++ ) {

     *element(index)->iframe() = me;

     // Get the caller frame (possibly skeletal)

     me = me.sender(&map);

   }

   frame caller_frame = me;

   // Do the unpacking of interpreter frames; the frame at index 0 represents the top activation, so it has no callee

   // Unpack the frames from the oldest (frames() -1) to the youngest (0)

   for (index = frames() - 1; index >= 0 ; index--) {

     int callee_parameters = index == 0 ? 0 : element(index-1)->method()->size_of_parameters();

     int callee_locals     = index == 0 ? 0 : element(index-1)->method()->max_locals();

     element(index)->unpack_on_stack(callee_parameters,

                                     callee_locals,

                                     &caller_frame,

                                     index == 0,

                                     exec_mode);

     if (index == frames() - 1) {

       Deoptimization::unwind_callee_save_values(element(index)->iframe(), this);

     }

     caller_frame = *element(index)->iframe();

   }

   deallocate_monitor_chunks();

 }

 void vframeArray::deallocate_monitor_chunks() {

   JavaThread* jt = JavaThread::current();

   for (int index = 0; index < frames(); index++ ) {

      element(index)->free_monitors(jt);

   }

 }

 #ifndef PRODUCT

 bool vframeArray::structural_compare(JavaThread* thread, GrowableArray<compiledVFrame*>* chunk) {

   if (owner_thread() != thread) return false;

   int index = 0;

 #if 0 // FIXME can't do this comparison

   // Compare only within vframe array.

   for (deoptimizedVFrame* vf = deoptimizedVFrame::cast(vframe_at(first_index())); vf; vf = vf->deoptimized_sender_or_null()) {

     if (index >= chunk->length() || !vf->structural_compare(chunk->at(index))) return false;

     index++;

   }

   if (index != chunk->length()) return false;

 #endif

   return true;

 }

 #endif

 address vframeArray::register_location(int i) const {

   assert(0 <= i && i < RegisterMap::reg_count, "index out of bounds");

   return (address) & _callee_registers[i];

 }

 #ifndef PRODUCT

 // Printing

 // Note: we cannot have print_on as const, as we allocate inside the method

 void vframeArray::print_on_2(outputStream* st)  {

   st->print_cr(" - sp: " INTPTR_FORMAT, sp());

   st->print(" - thread: ");

   Thread::current()->print();

   st->print_cr(" - frame size: %d", frame_size());

   for (int index = 0; index < frames() ; index++ ) {

     element(index)->print(st);

   }

 }

 void vframeArrayElement::print(outputStream* st) {

   st->print_cr(" - interpreter_frame -> sp: " INTPTR_FORMAT, iframe()->sp());

 }

 void vframeArray::print_value_on(outputStream* st) const {

   st->print_cr("vframeArray [%d] ", frames());

 }

 #endif