Mon, 13 Sep 2010 23:24:30 -0700
6939224: MethodHandle.invokeGeneric needs to perform the correct set of conversions
Reviewed-by: never
1 /*
2 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_sharedRuntime_x86_64.cpp.incl"
28 DeoptimizationBlob *SharedRuntime::_deopt_blob;
29 #ifdef COMPILER2
30 UncommonTrapBlob *SharedRuntime::_uncommon_trap_blob;
31 ExceptionBlob *OptoRuntime::_exception_blob;
32 #endif // COMPILER2
34 SafepointBlob *SharedRuntime::_polling_page_safepoint_handler_blob;
35 SafepointBlob *SharedRuntime::_polling_page_return_handler_blob;
36 RuntimeStub* SharedRuntime::_wrong_method_blob;
37 RuntimeStub* SharedRuntime::_ic_miss_blob;
38 RuntimeStub* SharedRuntime::_resolve_opt_virtual_call_blob;
39 RuntimeStub* SharedRuntime::_resolve_virtual_call_blob;
40 RuntimeStub* SharedRuntime::_resolve_static_call_blob;
42 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;
44 #define __ masm->
46 class SimpleRuntimeFrame {
48 public:
50 // Most of the runtime stubs have this simple frame layout.
51 // This class exists to make the layout shared in one place.
52 // Offsets are for compiler stack slots, which are jints.
53 enum layout {
54 // The frame sender code expects that rbp will be in the "natural" place and
55 // will override any oopMap setting for it. We must therefore force the layout
56 // so that it agrees with the frame sender code.
57 rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,
58 rbp_off2,
59 return_off, return_off2,
60 framesize
61 };
62 };
64 class RegisterSaver {
65 // Capture info about frame layout. Layout offsets are in jint
66 // units because compiler frame slots are jints.
67 #define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off
68 enum layout {
69 fpu_state_off = frame::arg_reg_save_area_bytes/BytesPerInt, // fxsave save area
70 xmm_off = fpu_state_off + 160/BytesPerInt, // offset in fxsave save area
71 DEF_XMM_OFFS(0),
72 DEF_XMM_OFFS(1),
73 DEF_XMM_OFFS(2),
74 DEF_XMM_OFFS(3),
75 DEF_XMM_OFFS(4),
76 DEF_XMM_OFFS(5),
77 DEF_XMM_OFFS(6),
78 DEF_XMM_OFFS(7),
79 DEF_XMM_OFFS(8),
80 DEF_XMM_OFFS(9),
81 DEF_XMM_OFFS(10),
82 DEF_XMM_OFFS(11),
83 DEF_XMM_OFFS(12),
84 DEF_XMM_OFFS(13),
85 DEF_XMM_OFFS(14),
86 DEF_XMM_OFFS(15),
87 fpu_state_end = fpu_state_off + ((FPUStateSizeInWords-1)*wordSize / BytesPerInt),
88 fpu_stateH_end,
89 r15_off, r15H_off,
90 r14_off, r14H_off,
91 r13_off, r13H_off,
92 r12_off, r12H_off,
93 r11_off, r11H_off,
94 r10_off, r10H_off,
95 r9_off, r9H_off,
96 r8_off, r8H_off,
97 rdi_off, rdiH_off,
98 rsi_off, rsiH_off,
99 ignore_off, ignoreH_off, // extra copy of rbp
100 rsp_off, rspH_off,
101 rbx_off, rbxH_off,
102 rdx_off, rdxH_off,
103 rcx_off, rcxH_off,
104 rax_off, raxH_off,
105 // 16-byte stack alignment fill word: see MacroAssembler::push/pop_IU_state
106 align_off, alignH_off,
107 flags_off, flagsH_off,
108 // The frame sender code expects that rbp will be in the "natural" place and
109 // will override any oopMap setting for it. We must therefore force the layout
110 // so that it agrees with the frame sender code.
111 rbp_off, rbpH_off, // copy of rbp we will restore
112 return_off, returnH_off, // slot for return address
113 reg_save_size // size in compiler stack slots
114 };
116 public:
117 static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words);
118 static void restore_live_registers(MacroAssembler* masm);
120 // Offsets into the register save area
121 // Used by deoptimization when it is managing result register
122 // values on its own
124 static int rax_offset_in_bytes(void) { return BytesPerInt * rax_off; }
125 static int rdx_offset_in_bytes(void) { return BytesPerInt * rdx_off; }
126 static int rbx_offset_in_bytes(void) { return BytesPerInt * rbx_off; }
127 static int xmm0_offset_in_bytes(void) { return BytesPerInt * xmm0_off; }
128 static int return_offset_in_bytes(void) { return BytesPerInt * return_off; }
130 // During deoptimization only the result registers need to be restored,
131 // all the other values have already been extracted.
132 static void restore_result_registers(MacroAssembler* masm);
133 };
135 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words) {
137 // Always make the frame size 16-byte aligned
138 int frame_size_in_bytes = round_to(additional_frame_words*wordSize +
139 reg_save_size*BytesPerInt, 16);
140 // OopMap frame size is in compiler stack slots (jint's) not bytes or words
141 int frame_size_in_slots = frame_size_in_bytes / BytesPerInt;
142 // The caller will allocate additional_frame_words
143 int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt;
144 // CodeBlob frame size is in words.
145 int frame_size_in_words = frame_size_in_bytes / wordSize;
146 *total_frame_words = frame_size_in_words;
148 // Save registers, fpu state, and flags.
149 // We assume caller has already pushed the return address onto the
150 // stack, so rsp is 8-byte aligned here.
151 // We push rpb twice in this sequence because we want the real rbp
152 // to be under the return like a normal enter.
154 __ enter(); // rsp becomes 16-byte aligned here
155 __ push_CPU_state(); // Push a multiple of 16 bytes
156 if (frame::arg_reg_save_area_bytes != 0) {
157 // Allocate argument register save area
158 __ subptr(rsp, frame::arg_reg_save_area_bytes);
159 }
161 // Set an oopmap for the call site. This oopmap will map all
162 // oop-registers and debug-info registers as callee-saved. This
163 // will allow deoptimization at this safepoint to find all possible
164 // debug-info recordings, as well as let GC find all oops.
166 OopMapSet *oop_maps = new OopMapSet();
167 OopMap* map = new OopMap(frame_size_in_slots, 0);
168 map->set_callee_saved(VMRegImpl::stack2reg( rax_off + additional_frame_slots), rax->as_VMReg());
169 map->set_callee_saved(VMRegImpl::stack2reg( rcx_off + additional_frame_slots), rcx->as_VMReg());
170 map->set_callee_saved(VMRegImpl::stack2reg( rdx_off + additional_frame_slots), rdx->as_VMReg());
171 map->set_callee_saved(VMRegImpl::stack2reg( rbx_off + additional_frame_slots), rbx->as_VMReg());
172 // rbp location is known implicitly by the frame sender code, needs no oopmap
173 // and the location where rbp was saved by is ignored
174 map->set_callee_saved(VMRegImpl::stack2reg( rsi_off + additional_frame_slots), rsi->as_VMReg());
175 map->set_callee_saved(VMRegImpl::stack2reg( rdi_off + additional_frame_slots), rdi->as_VMReg());
176 map->set_callee_saved(VMRegImpl::stack2reg( r8_off + additional_frame_slots), r8->as_VMReg());
177 map->set_callee_saved(VMRegImpl::stack2reg( r9_off + additional_frame_slots), r9->as_VMReg());
178 map->set_callee_saved(VMRegImpl::stack2reg( r10_off + additional_frame_slots), r10->as_VMReg());
179 map->set_callee_saved(VMRegImpl::stack2reg( r11_off + additional_frame_slots), r11->as_VMReg());
180 map->set_callee_saved(VMRegImpl::stack2reg( r12_off + additional_frame_slots), r12->as_VMReg());
181 map->set_callee_saved(VMRegImpl::stack2reg( r13_off + additional_frame_slots), r13->as_VMReg());
182 map->set_callee_saved(VMRegImpl::stack2reg( r14_off + additional_frame_slots), r14->as_VMReg());
183 map->set_callee_saved(VMRegImpl::stack2reg( r15_off + additional_frame_slots), r15->as_VMReg());
184 map->set_callee_saved(VMRegImpl::stack2reg(xmm0_off + additional_frame_slots), xmm0->as_VMReg());
185 map->set_callee_saved(VMRegImpl::stack2reg(xmm1_off + additional_frame_slots), xmm1->as_VMReg());
186 map->set_callee_saved(VMRegImpl::stack2reg(xmm2_off + additional_frame_slots), xmm2->as_VMReg());
187 map->set_callee_saved(VMRegImpl::stack2reg(xmm3_off + additional_frame_slots), xmm3->as_VMReg());
188 map->set_callee_saved(VMRegImpl::stack2reg(xmm4_off + additional_frame_slots), xmm4->as_VMReg());
189 map->set_callee_saved(VMRegImpl::stack2reg(xmm5_off + additional_frame_slots), xmm5->as_VMReg());
190 map->set_callee_saved(VMRegImpl::stack2reg(xmm6_off + additional_frame_slots), xmm6->as_VMReg());
191 map->set_callee_saved(VMRegImpl::stack2reg(xmm7_off + additional_frame_slots), xmm7->as_VMReg());
192 map->set_callee_saved(VMRegImpl::stack2reg(xmm8_off + additional_frame_slots), xmm8->as_VMReg());
193 map->set_callee_saved(VMRegImpl::stack2reg(xmm9_off + additional_frame_slots), xmm9->as_VMReg());
194 map->set_callee_saved(VMRegImpl::stack2reg(xmm10_off + additional_frame_slots), xmm10->as_VMReg());
195 map->set_callee_saved(VMRegImpl::stack2reg(xmm11_off + additional_frame_slots), xmm11->as_VMReg());
196 map->set_callee_saved(VMRegImpl::stack2reg(xmm12_off + additional_frame_slots), xmm12->as_VMReg());
197 map->set_callee_saved(VMRegImpl::stack2reg(xmm13_off + additional_frame_slots), xmm13->as_VMReg());
198 map->set_callee_saved(VMRegImpl::stack2reg(xmm14_off + additional_frame_slots), xmm14->as_VMReg());
199 map->set_callee_saved(VMRegImpl::stack2reg(xmm15_off + additional_frame_slots), xmm15->as_VMReg());
201 // %%% These should all be a waste but we'll keep things as they were for now
202 if (true) {
203 map->set_callee_saved(VMRegImpl::stack2reg( raxH_off + additional_frame_slots),
204 rax->as_VMReg()->next());
205 map->set_callee_saved(VMRegImpl::stack2reg( rcxH_off + additional_frame_slots),
206 rcx->as_VMReg()->next());
207 map->set_callee_saved(VMRegImpl::stack2reg( rdxH_off + additional_frame_slots),
208 rdx->as_VMReg()->next());
209 map->set_callee_saved(VMRegImpl::stack2reg( rbxH_off + additional_frame_slots),
210 rbx->as_VMReg()->next());
211 // rbp location is known implicitly by the frame sender code, needs no oopmap
212 map->set_callee_saved(VMRegImpl::stack2reg( rsiH_off + additional_frame_slots),
213 rsi->as_VMReg()->next());
214 map->set_callee_saved(VMRegImpl::stack2reg( rdiH_off + additional_frame_slots),
215 rdi->as_VMReg()->next());
216 map->set_callee_saved(VMRegImpl::stack2reg( r8H_off + additional_frame_slots),
217 r8->as_VMReg()->next());
218 map->set_callee_saved(VMRegImpl::stack2reg( r9H_off + additional_frame_slots),
219 r9->as_VMReg()->next());
220 map->set_callee_saved(VMRegImpl::stack2reg( r10H_off + additional_frame_slots),
221 r10->as_VMReg()->next());
222 map->set_callee_saved(VMRegImpl::stack2reg( r11H_off + additional_frame_slots),
223 r11->as_VMReg()->next());
224 map->set_callee_saved(VMRegImpl::stack2reg( r12H_off + additional_frame_slots),
225 r12->as_VMReg()->next());
226 map->set_callee_saved(VMRegImpl::stack2reg( r13H_off + additional_frame_slots),
227 r13->as_VMReg()->next());
228 map->set_callee_saved(VMRegImpl::stack2reg( r14H_off + additional_frame_slots),
229 r14->as_VMReg()->next());
230 map->set_callee_saved(VMRegImpl::stack2reg( r15H_off + additional_frame_slots),
231 r15->as_VMReg()->next());
232 map->set_callee_saved(VMRegImpl::stack2reg(xmm0H_off + additional_frame_slots),
233 xmm0->as_VMReg()->next());
234 map->set_callee_saved(VMRegImpl::stack2reg(xmm1H_off + additional_frame_slots),
235 xmm1->as_VMReg()->next());
236 map->set_callee_saved(VMRegImpl::stack2reg(xmm2H_off + additional_frame_slots),
237 xmm2->as_VMReg()->next());
238 map->set_callee_saved(VMRegImpl::stack2reg(xmm3H_off + additional_frame_slots),
239 xmm3->as_VMReg()->next());
240 map->set_callee_saved(VMRegImpl::stack2reg(xmm4H_off + additional_frame_slots),
241 xmm4->as_VMReg()->next());
242 map->set_callee_saved(VMRegImpl::stack2reg(xmm5H_off + additional_frame_slots),
243 xmm5->as_VMReg()->next());
244 map->set_callee_saved(VMRegImpl::stack2reg(xmm6H_off + additional_frame_slots),
245 xmm6->as_VMReg()->next());
246 map->set_callee_saved(VMRegImpl::stack2reg(xmm7H_off + additional_frame_slots),
247 xmm7->as_VMReg()->next());
248 map->set_callee_saved(VMRegImpl::stack2reg(xmm8H_off + additional_frame_slots),
249 xmm8->as_VMReg()->next());
250 map->set_callee_saved(VMRegImpl::stack2reg(xmm9H_off + additional_frame_slots),
251 xmm9->as_VMReg()->next());
252 map->set_callee_saved(VMRegImpl::stack2reg(xmm10H_off + additional_frame_slots),
253 xmm10->as_VMReg()->next());
254 map->set_callee_saved(VMRegImpl::stack2reg(xmm11H_off + additional_frame_slots),
255 xmm11->as_VMReg()->next());
256 map->set_callee_saved(VMRegImpl::stack2reg(xmm12H_off + additional_frame_slots),
257 xmm12->as_VMReg()->next());
258 map->set_callee_saved(VMRegImpl::stack2reg(xmm13H_off + additional_frame_slots),
259 xmm13->as_VMReg()->next());
260 map->set_callee_saved(VMRegImpl::stack2reg(xmm14H_off + additional_frame_slots),
261 xmm14->as_VMReg()->next());
262 map->set_callee_saved(VMRegImpl::stack2reg(xmm15H_off + additional_frame_slots),
263 xmm15->as_VMReg()->next());
264 }
266 return map;
267 }
269 void RegisterSaver::restore_live_registers(MacroAssembler* masm) {
270 if (frame::arg_reg_save_area_bytes != 0) {
271 // Pop arg register save area
272 __ addptr(rsp, frame::arg_reg_save_area_bytes);
273 }
274 // Recover CPU state
275 __ pop_CPU_state();
276 // Get the rbp described implicitly by the calling convention (no oopMap)
277 __ pop(rbp);
278 }
280 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
282 // Just restore result register. Only used by deoptimization. By
283 // now any callee save register that needs to be restored to a c2
284 // caller of the deoptee has been extracted into the vframeArray
285 // and will be stuffed into the c2i adapter we create for later
286 // restoration so only result registers need to be restored here.
288 // Restore fp result register
289 __ movdbl(xmm0, Address(rsp, xmm0_offset_in_bytes()));
290 // Restore integer result register
291 __ movptr(rax, Address(rsp, rax_offset_in_bytes()));
292 __ movptr(rdx, Address(rsp, rdx_offset_in_bytes()));
294 // Pop all of the register save are off the stack except the return address
295 __ addptr(rsp, return_offset_in_bytes());
296 }
298 // The java_calling_convention describes stack locations as ideal slots on
299 // a frame with no abi restrictions. Since we must observe abi restrictions
300 // (like the placement of the register window) the slots must be biased by
301 // the following value.
302 static int reg2offset_in(VMReg r) {
303 // Account for saved rbp and return address
304 // This should really be in_preserve_stack_slots
305 return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size;
306 }
308 static int reg2offset_out(VMReg r) {
309 return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
310 }
312 // ---------------------------------------------------------------------------
313 // Read the array of BasicTypes from a signature, and compute where the
314 // arguments should go. Values in the VMRegPair regs array refer to 4-byte
315 // quantities. Values less than VMRegImpl::stack0 are registers, those above
316 // refer to 4-byte stack slots. All stack slots are based off of the stack pointer
317 // as framesizes are fixed.
318 // VMRegImpl::stack0 refers to the first slot 0(sp).
319 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register
320 // up to RegisterImpl::number_of_registers) are the 64-bit
321 // integer registers.
323 // Note: the INPUTS in sig_bt are in units of Java argument words, which are
324 // either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit
325 // units regardless of build. Of course for i486 there is no 64 bit build
327 // The Java calling convention is a "shifted" version of the C ABI.
328 // By skipping the first C ABI register we can call non-static jni methods
329 // with small numbers of arguments without having to shuffle the arguments
330 // at all. Since we control the java ABI we ought to at least get some
331 // advantage out of it.
333 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
334 VMRegPair *regs,
335 int total_args_passed,
336 int is_outgoing) {
338 // Create the mapping between argument positions and
339 // registers.
340 static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = {
341 j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5
342 };
343 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_j] = {
344 j_farg0, j_farg1, j_farg2, j_farg3,
345 j_farg4, j_farg5, j_farg6, j_farg7
346 };
349 uint int_args = 0;
350 uint fp_args = 0;
351 uint stk_args = 0; // inc by 2 each time
353 for (int i = 0; i < total_args_passed; i++) {
354 switch (sig_bt[i]) {
355 case T_BOOLEAN:
356 case T_CHAR:
357 case T_BYTE:
358 case T_SHORT:
359 case T_INT:
360 if (int_args < Argument::n_int_register_parameters_j) {
361 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
362 } else {
363 regs[i].set1(VMRegImpl::stack2reg(stk_args));
364 stk_args += 2;
365 }
366 break;
367 case T_VOID:
368 // halves of T_LONG or T_DOUBLE
369 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
370 regs[i].set_bad();
371 break;
372 case T_LONG:
373 assert(sig_bt[i + 1] == T_VOID, "expecting half");
374 // fall through
375 case T_OBJECT:
376 case T_ARRAY:
377 case T_ADDRESS:
378 if (int_args < Argument::n_int_register_parameters_j) {
379 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
380 } else {
381 regs[i].set2(VMRegImpl::stack2reg(stk_args));
382 stk_args += 2;
383 }
384 break;
385 case T_FLOAT:
386 if (fp_args < Argument::n_float_register_parameters_j) {
387 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
388 } else {
389 regs[i].set1(VMRegImpl::stack2reg(stk_args));
390 stk_args += 2;
391 }
392 break;
393 case T_DOUBLE:
394 assert(sig_bt[i + 1] == T_VOID, "expecting half");
395 if (fp_args < Argument::n_float_register_parameters_j) {
396 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
397 } else {
398 regs[i].set2(VMRegImpl::stack2reg(stk_args));
399 stk_args += 2;
400 }
401 break;
402 default:
403 ShouldNotReachHere();
404 break;
405 }
406 }
408 return round_to(stk_args, 2);
409 }
411 // Patch the callers callsite with entry to compiled code if it exists.
412 static void patch_callers_callsite(MacroAssembler *masm) {
413 Label L;
414 __ verify_oop(rbx);
415 __ cmpptr(Address(rbx, in_bytes(methodOopDesc::code_offset())), (int32_t)NULL_WORD);
416 __ jcc(Assembler::equal, L);
418 // Save the current stack pointer
419 __ mov(r13, rsp);
420 // Schedule the branch target address early.
421 // Call into the VM to patch the caller, then jump to compiled callee
422 // rax isn't live so capture return address while we easily can
423 __ movptr(rax, Address(rsp, 0));
425 // align stack so push_CPU_state doesn't fault
426 __ andptr(rsp, -(StackAlignmentInBytes));
427 __ push_CPU_state();
430 __ verify_oop(rbx);
431 // VM needs caller's callsite
432 // VM needs target method
433 // This needs to be a long call since we will relocate this adapter to
434 // the codeBuffer and it may not reach
436 // Allocate argument register save area
437 if (frame::arg_reg_save_area_bytes != 0) {
438 __ subptr(rsp, frame::arg_reg_save_area_bytes);
439 }
440 __ mov(c_rarg0, rbx);
441 __ mov(c_rarg1, rax);
442 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
444 // De-allocate argument register save area
445 if (frame::arg_reg_save_area_bytes != 0) {
446 __ addptr(rsp, frame::arg_reg_save_area_bytes);
447 }
449 __ pop_CPU_state();
450 // restore sp
451 __ mov(rsp, r13);
452 __ bind(L);
453 }
456 static void gen_c2i_adapter(MacroAssembler *masm,
457 int total_args_passed,
458 int comp_args_on_stack,
459 const BasicType *sig_bt,
460 const VMRegPair *regs,
461 Label& skip_fixup) {
462 // Before we get into the guts of the C2I adapter, see if we should be here
463 // at all. We've come from compiled code and are attempting to jump to the
464 // interpreter, which means the caller made a static call to get here
465 // (vcalls always get a compiled target if there is one). Check for a
466 // compiled target. If there is one, we need to patch the caller's call.
467 patch_callers_callsite(masm);
469 __ bind(skip_fixup);
471 // Since all args are passed on the stack, total_args_passed *
472 // Interpreter::stackElementSize is the space we need. Plus 1 because
473 // we also account for the return address location since
474 // we store it first rather than hold it in rax across all the shuffling
476 int extraspace = (total_args_passed * Interpreter::stackElementSize) + wordSize;
478 // stack is aligned, keep it that way
479 extraspace = round_to(extraspace, 2*wordSize);
481 // Get return address
482 __ pop(rax);
484 // set senderSP value
485 __ mov(r13, rsp);
487 __ subptr(rsp, extraspace);
489 // Store the return address in the expected location
490 __ movptr(Address(rsp, 0), rax);
492 // Now write the args into the outgoing interpreter space
493 for (int i = 0; i < total_args_passed; i++) {
494 if (sig_bt[i] == T_VOID) {
495 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
496 continue;
497 }
499 // offset to start parameters
500 int st_off = (total_args_passed - i) * Interpreter::stackElementSize;
501 int next_off = st_off - Interpreter::stackElementSize;
503 // Say 4 args:
504 // i st_off
505 // 0 32 T_LONG
506 // 1 24 T_VOID
507 // 2 16 T_OBJECT
508 // 3 8 T_BOOL
509 // - 0 return address
510 //
511 // However to make thing extra confusing. Because we can fit a long/double in
512 // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter
513 // leaves one slot empty and only stores to a single slot. In this case the
514 // slot that is occupied is the T_VOID slot. See I said it was confusing.
516 VMReg r_1 = regs[i].first();
517 VMReg r_2 = regs[i].second();
518 if (!r_1->is_valid()) {
519 assert(!r_2->is_valid(), "");
520 continue;
521 }
522 if (r_1->is_stack()) {
523 // memory to memory use rax
524 int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;
525 if (!r_2->is_valid()) {
526 // sign extend??
527 __ movl(rax, Address(rsp, ld_off));
528 __ movptr(Address(rsp, st_off), rax);
530 } else {
532 __ movq(rax, Address(rsp, ld_off));
534 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
535 // T_DOUBLE and T_LONG use two slots in the interpreter
536 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
537 // ld_off == LSW, ld_off+wordSize == MSW
538 // st_off == MSW, next_off == LSW
539 __ movq(Address(rsp, next_off), rax);
540 #ifdef ASSERT
541 // Overwrite the unused slot with known junk
542 __ mov64(rax, CONST64(0xdeadffffdeadaaaa));
543 __ movptr(Address(rsp, st_off), rax);
544 #endif /* ASSERT */
545 } else {
546 __ movq(Address(rsp, st_off), rax);
547 }
548 }
549 } else if (r_1->is_Register()) {
550 Register r = r_1->as_Register();
551 if (!r_2->is_valid()) {
552 // must be only an int (or less ) so move only 32bits to slot
553 // why not sign extend??
554 __ movl(Address(rsp, st_off), r);
555 } else {
556 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
557 // T_DOUBLE and T_LONG use two slots in the interpreter
558 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
559 // long/double in gpr
560 #ifdef ASSERT
561 // Overwrite the unused slot with known junk
562 __ mov64(rax, CONST64(0xdeadffffdeadaaab));
563 __ movptr(Address(rsp, st_off), rax);
564 #endif /* ASSERT */
565 __ movq(Address(rsp, next_off), r);
566 } else {
567 __ movptr(Address(rsp, st_off), r);
568 }
569 }
570 } else {
571 assert(r_1->is_XMMRegister(), "");
572 if (!r_2->is_valid()) {
573 // only a float use just part of the slot
574 __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
575 } else {
576 #ifdef ASSERT
577 // Overwrite the unused slot with known junk
578 __ mov64(rax, CONST64(0xdeadffffdeadaaac));
579 __ movptr(Address(rsp, st_off), rax);
580 #endif /* ASSERT */
581 __ movdbl(Address(rsp, next_off), r_1->as_XMMRegister());
582 }
583 }
584 }
586 // Schedule the branch target address early.
587 __ movptr(rcx, Address(rbx, in_bytes(methodOopDesc::interpreter_entry_offset())));
588 __ jmp(rcx);
589 }
591 static void gen_i2c_adapter(MacroAssembler *masm,
592 int total_args_passed,
593 int comp_args_on_stack,
594 const BasicType *sig_bt,
595 const VMRegPair *regs) {
597 //
598 // We will only enter here from an interpreted frame and never from after
599 // passing thru a c2i. Azul allowed this but we do not. If we lose the
600 // race and use a c2i we will remain interpreted for the race loser(s).
601 // This removes all sorts of headaches on the x86 side and also eliminates
602 // the possibility of having c2i -> i2c -> c2i -> ... endless transitions.
605 // Note: r13 contains the senderSP on entry. We must preserve it since
606 // we may do a i2c -> c2i transition if we lose a race where compiled
607 // code goes non-entrant while we get args ready.
608 // In addition we use r13 to locate all the interpreter args as
609 // we must align the stack to 16 bytes on an i2c entry else we
610 // lose alignment we expect in all compiled code and register
611 // save code can segv when fxsave instructions find improperly
612 // aligned stack pointer.
614 __ movptr(rax, Address(rsp, 0));
616 // Must preserve original SP for loading incoming arguments because
617 // we need to align the outgoing SP for compiled code.
618 __ movptr(r11, rsp);
620 // Cut-out for having no stack args. Since up to 2 int/oop args are passed
621 // in registers, we will occasionally have no stack args.
622 int comp_words_on_stack = 0;
623 if (comp_args_on_stack) {
624 // Sig words on the stack are greater-than VMRegImpl::stack0. Those in
625 // registers are below. By subtracting stack0, we either get a negative
626 // number (all values in registers) or the maximum stack slot accessed.
628 // Convert 4-byte c2 stack slots to words.
629 comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord;
630 // Round up to miminum stack alignment, in wordSize
631 comp_words_on_stack = round_to(comp_words_on_stack, 2);
632 __ subptr(rsp, comp_words_on_stack * wordSize);
633 }
636 // Ensure compiled code always sees stack at proper alignment
637 __ andptr(rsp, -16);
639 // push the return address and misalign the stack that youngest frame always sees
640 // as far as the placement of the call instruction
641 __ push(rax);
643 // Put saved SP in another register
644 const Register saved_sp = rax;
645 __ movptr(saved_sp, r11);
647 // Will jump to the compiled code just as if compiled code was doing it.
648 // Pre-load the register-jump target early, to schedule it better.
649 __ movptr(r11, Address(rbx, in_bytes(methodOopDesc::from_compiled_offset())));
651 // Now generate the shuffle code. Pick up all register args and move the
652 // rest through the floating point stack top.
653 for (int i = 0; i < total_args_passed; i++) {
654 if (sig_bt[i] == T_VOID) {
655 // Longs and doubles are passed in native word order, but misaligned
656 // in the 32-bit build.
657 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
658 continue;
659 }
661 // Pick up 0, 1 or 2 words from SP+offset.
663 assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
664 "scrambled load targets?");
665 // Load in argument order going down.
666 int ld_off = (total_args_passed - i)*Interpreter::stackElementSize;
667 // Point to interpreter value (vs. tag)
668 int next_off = ld_off - Interpreter::stackElementSize;
669 //
670 //
671 //
672 VMReg r_1 = regs[i].first();
673 VMReg r_2 = regs[i].second();
674 if (!r_1->is_valid()) {
675 assert(!r_2->is_valid(), "");
676 continue;
677 }
678 if (r_1->is_stack()) {
679 // Convert stack slot to an SP offset (+ wordSize to account for return address )
680 int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;
682 // We can use r13 as a temp here because compiled code doesn't need r13 as an input
683 // and if we end up going thru a c2i because of a miss a reasonable value of r13
684 // will be generated.
685 if (!r_2->is_valid()) {
686 // sign extend???
687 __ movl(r13, Address(saved_sp, ld_off));
688 __ movptr(Address(rsp, st_off), r13);
689 } else {
690 //
691 // We are using two optoregs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
692 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
693 // So we must adjust where to pick up the data to match the interpreter.
694 //
695 // Interpreter local[n] == MSW, local[n+1] == LSW however locals
696 // are accessed as negative so LSW is at LOW address
698 // ld_off is MSW so get LSW
699 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
700 next_off : ld_off;
701 __ movq(r13, Address(saved_sp, offset));
702 // st_off is LSW (i.e. reg.first())
703 __ movq(Address(rsp, st_off), r13);
704 }
705 } else if (r_1->is_Register()) { // Register argument
706 Register r = r_1->as_Register();
707 assert(r != rax, "must be different");
708 if (r_2->is_valid()) {
709 //
710 // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
711 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
712 // So we must adjust where to pick up the data to match the interpreter.
714 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
715 next_off : ld_off;
717 // this can be a misaligned move
718 __ movq(r, Address(saved_sp, offset));
719 } else {
720 // sign extend and use a full word?
721 __ movl(r, Address(saved_sp, ld_off));
722 }
723 } else {
724 if (!r_2->is_valid()) {
725 __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
726 } else {
727 __ movdbl(r_1->as_XMMRegister(), Address(saved_sp, next_off));
728 }
729 }
730 }
732 // 6243940 We might end up in handle_wrong_method if
733 // the callee is deoptimized as we race thru here. If that
734 // happens we don't want to take a safepoint because the
735 // caller frame will look interpreted and arguments are now
736 // "compiled" so it is much better to make this transition
737 // invisible to the stack walking code. Unfortunately if
738 // we try and find the callee by normal means a safepoint
739 // is possible. So we stash the desired callee in the thread
740 // and the vm will find there should this case occur.
742 __ movptr(Address(r15_thread, JavaThread::callee_target_offset()), rbx);
744 // put methodOop where a c2i would expect should we end up there
745 // only needed becaus eof c2 resolve stubs return methodOop as a result in
746 // rax
747 __ mov(rax, rbx);
748 __ jmp(r11);
749 }
751 // ---------------------------------------------------------------
752 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
753 int total_args_passed,
754 int comp_args_on_stack,
755 const BasicType *sig_bt,
756 const VMRegPair *regs,
757 AdapterFingerPrint* fingerprint) {
758 address i2c_entry = __ pc();
760 gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);
762 // -------------------------------------------------------------------------
763 // Generate a C2I adapter. On entry we know rbx holds the methodOop during calls
764 // to the interpreter. The args start out packed in the compiled layout. They
765 // need to be unpacked into the interpreter layout. This will almost always
766 // require some stack space. We grow the current (compiled) stack, then repack
767 // the args. We finally end in a jump to the generic interpreter entry point.
768 // On exit from the interpreter, the interpreter will restore our SP (lest the
769 // compiled code, which relys solely on SP and not RBP, get sick).
771 address c2i_unverified_entry = __ pc();
772 Label skip_fixup;
773 Label ok;
775 Register holder = rax;
776 Register receiver = j_rarg0;
777 Register temp = rbx;
779 {
780 __ verify_oop(holder);
781 __ load_klass(temp, receiver);
782 __ verify_oop(temp);
784 __ cmpptr(temp, Address(holder, compiledICHolderOopDesc::holder_klass_offset()));
785 __ movptr(rbx, Address(holder, compiledICHolderOopDesc::holder_method_offset()));
786 __ jcc(Assembler::equal, ok);
787 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
789 __ bind(ok);
790 // Method might have been compiled since the call site was patched to
791 // interpreted if that is the case treat it as a miss so we can get
792 // the call site corrected.
793 __ cmpptr(Address(rbx, in_bytes(methodOopDesc::code_offset())), (int32_t)NULL_WORD);
794 __ jcc(Assembler::equal, skip_fixup);
795 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
796 }
798 address c2i_entry = __ pc();
800 gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);
802 __ flush();
803 return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);
804 }
806 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
807 VMRegPair *regs,
808 int total_args_passed) {
809 // We return the amount of VMRegImpl stack slots we need to reserve for all
810 // the arguments NOT counting out_preserve_stack_slots.
812 // NOTE: These arrays will have to change when c1 is ported
813 #ifdef _WIN64
814 static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
815 c_rarg0, c_rarg1, c_rarg2, c_rarg3
816 };
817 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
818 c_farg0, c_farg1, c_farg2, c_farg3
819 };
820 #else
821 static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
822 c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, c_rarg5
823 };
824 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
825 c_farg0, c_farg1, c_farg2, c_farg3,
826 c_farg4, c_farg5, c_farg6, c_farg7
827 };
828 #endif // _WIN64
831 uint int_args = 0;
832 uint fp_args = 0;
833 uint stk_args = 0; // inc by 2 each time
835 for (int i = 0; i < total_args_passed; i++) {
836 switch (sig_bt[i]) {
837 case T_BOOLEAN:
838 case T_CHAR:
839 case T_BYTE:
840 case T_SHORT:
841 case T_INT:
842 if (int_args < Argument::n_int_register_parameters_c) {
843 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
844 #ifdef _WIN64
845 fp_args++;
846 // Allocate slots for callee to stuff register args the stack.
847 stk_args += 2;
848 #endif
849 } else {
850 regs[i].set1(VMRegImpl::stack2reg(stk_args));
851 stk_args += 2;
852 }
853 break;
854 case T_LONG:
855 assert(sig_bt[i + 1] == T_VOID, "expecting half");
856 // fall through
857 case T_OBJECT:
858 case T_ARRAY:
859 case T_ADDRESS:
860 if (int_args < Argument::n_int_register_parameters_c) {
861 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
862 #ifdef _WIN64
863 fp_args++;
864 stk_args += 2;
865 #endif
866 } else {
867 regs[i].set2(VMRegImpl::stack2reg(stk_args));
868 stk_args += 2;
869 }
870 break;
871 case T_FLOAT:
872 if (fp_args < Argument::n_float_register_parameters_c) {
873 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
874 #ifdef _WIN64
875 int_args++;
876 // Allocate slots for callee to stuff register args the stack.
877 stk_args += 2;
878 #endif
879 } else {
880 regs[i].set1(VMRegImpl::stack2reg(stk_args));
881 stk_args += 2;
882 }
883 break;
884 case T_DOUBLE:
885 assert(sig_bt[i + 1] == T_VOID, "expecting half");
886 if (fp_args < Argument::n_float_register_parameters_c) {
887 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
888 #ifdef _WIN64
889 int_args++;
890 // Allocate slots for callee to stuff register args the stack.
891 stk_args += 2;
892 #endif
893 } else {
894 regs[i].set2(VMRegImpl::stack2reg(stk_args));
895 stk_args += 2;
896 }
897 break;
898 case T_VOID: // Halves of longs and doubles
899 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
900 regs[i].set_bad();
901 break;
902 default:
903 ShouldNotReachHere();
904 break;
905 }
906 }
907 #ifdef _WIN64
908 // windows abi requires that we always allocate enough stack space
909 // for 4 64bit registers to be stored down.
910 if (stk_args < 8) {
911 stk_args = 8;
912 }
913 #endif // _WIN64
915 return stk_args;
916 }
918 // On 64 bit we will store integer like items to the stack as
919 // 64 bits items (sparc abi) even though java would only store
920 // 32bits for a parameter. On 32bit it will simply be 32 bits
921 // So this routine will do 32->32 on 32bit and 32->64 on 64bit
922 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
923 if (src.first()->is_stack()) {
924 if (dst.first()->is_stack()) {
925 // stack to stack
926 __ movslq(rax, Address(rbp, reg2offset_in(src.first())));
927 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
928 } else {
929 // stack to reg
930 __ movslq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
931 }
932 } else if (dst.first()->is_stack()) {
933 // reg to stack
934 // Do we really have to sign extend???
935 // __ movslq(src.first()->as_Register(), src.first()->as_Register());
936 __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
937 } else {
938 // Do we really have to sign extend???
939 // __ movslq(dst.first()->as_Register(), src.first()->as_Register());
940 if (dst.first() != src.first()) {
941 __ movq(dst.first()->as_Register(), src.first()->as_Register());
942 }
943 }
944 }
947 // An oop arg. Must pass a handle not the oop itself
948 static void object_move(MacroAssembler* masm,
949 OopMap* map,
950 int oop_handle_offset,
951 int framesize_in_slots,
952 VMRegPair src,
953 VMRegPair dst,
954 bool is_receiver,
955 int* receiver_offset) {
957 // must pass a handle. First figure out the location we use as a handle
959 Register rHandle = dst.first()->is_stack() ? rax : dst.first()->as_Register();
961 // See if oop is NULL if it is we need no handle
963 if (src.first()->is_stack()) {
965 // Oop is already on the stack as an argument
966 int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
967 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
968 if (is_receiver) {
969 *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
970 }
972 __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);
973 __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));
974 // conditionally move a NULL
975 __ cmovptr(Assembler::equal, rHandle, Address(rbp, reg2offset_in(src.first())));
976 } else {
978 // Oop is in an a register we must store it to the space we reserve
979 // on the stack for oop_handles and pass a handle if oop is non-NULL
981 const Register rOop = src.first()->as_Register();
982 int oop_slot;
983 if (rOop == j_rarg0)
984 oop_slot = 0;
985 else if (rOop == j_rarg1)
986 oop_slot = 1;
987 else if (rOop == j_rarg2)
988 oop_slot = 2;
989 else if (rOop == j_rarg3)
990 oop_slot = 3;
991 else if (rOop == j_rarg4)
992 oop_slot = 4;
993 else {
994 assert(rOop == j_rarg5, "wrong register");
995 oop_slot = 5;
996 }
998 oop_slot = oop_slot * VMRegImpl::slots_per_word + oop_handle_offset;
999 int offset = oop_slot*VMRegImpl::stack_slot_size;
1001 map->set_oop(VMRegImpl::stack2reg(oop_slot));
1002 // Store oop in handle area, may be NULL
1003 __ movptr(Address(rsp, offset), rOop);
1004 if (is_receiver) {
1005 *receiver_offset = offset;
1006 }
1008 __ cmpptr(rOop, (int32_t)NULL_WORD);
1009 __ lea(rHandle, Address(rsp, offset));
1010 // conditionally move a NULL from the handle area where it was just stored
1011 __ cmovptr(Assembler::equal, rHandle, Address(rsp, offset));
1012 }
1014 // If arg is on the stack then place it otherwise it is already in correct reg.
1015 if (dst.first()->is_stack()) {
1016 __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
1017 }
1018 }
1020 // A float arg may have to do float reg int reg conversion
1021 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1022 assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
1024 // The calling conventions assures us that each VMregpair is either
1025 // all really one physical register or adjacent stack slots.
1026 // This greatly simplifies the cases here compared to sparc.
1028 if (src.first()->is_stack()) {
1029 if (dst.first()->is_stack()) {
1030 __ movl(rax, Address(rbp, reg2offset_in(src.first())));
1031 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1032 } else {
1033 // stack to reg
1034 assert(dst.first()->is_XMMRegister(), "only expect xmm registers as parameters");
1035 __ movflt(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_in(src.first())));
1036 }
1037 } else if (dst.first()->is_stack()) {
1038 // reg to stack
1039 assert(src.first()->is_XMMRegister(), "only expect xmm registers as parameters");
1040 __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1041 } else {
1042 // reg to reg
1043 // In theory these overlap but the ordering is such that this is likely a nop
1044 if ( src.first() != dst.first()) {
1045 __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());
1046 }
1047 }
1048 }
1050 // A long move
1051 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1053 // The calling conventions assures us that each VMregpair is either
1054 // all really one physical register or adjacent stack slots.
1055 // This greatly simplifies the cases here compared to sparc.
1057 if (src.is_single_phys_reg() ) {
1058 if (dst.is_single_phys_reg()) {
1059 if (dst.first() != src.first()) {
1060 __ mov(dst.first()->as_Register(), src.first()->as_Register());
1061 }
1062 } else {
1063 assert(dst.is_single_reg(), "not a stack pair");
1064 __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
1065 }
1066 } else if (dst.is_single_phys_reg()) {
1067 assert(src.is_single_reg(), "not a stack pair");
1068 __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_out(src.first())));
1069 } else {
1070 assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
1071 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
1072 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1073 }
1074 }
1076 // A double move
1077 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1079 // The calling conventions assures us that each VMregpair is either
1080 // all really one physical register or adjacent stack slots.
1081 // This greatly simplifies the cases here compared to sparc.
1083 if (src.is_single_phys_reg() ) {
1084 if (dst.is_single_phys_reg()) {
1085 // In theory these overlap but the ordering is such that this is likely a nop
1086 if ( src.first() != dst.first()) {
1087 __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());
1088 }
1089 } else {
1090 assert(dst.is_single_reg(), "not a stack pair");
1091 __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1092 }
1093 } else if (dst.is_single_phys_reg()) {
1094 assert(src.is_single_reg(), "not a stack pair");
1095 __ movdbl(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_out(src.first())));
1096 } else {
1097 assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
1098 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
1099 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1100 }
1101 }
1104 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1105 // We always ignore the frame_slots arg and just use the space just below frame pointer
1106 // which by this time is free to use
1107 switch (ret_type) {
1108 case T_FLOAT:
1109 __ movflt(Address(rbp, -wordSize), xmm0);
1110 break;
1111 case T_DOUBLE:
1112 __ movdbl(Address(rbp, -wordSize), xmm0);
1113 break;
1114 case T_VOID: break;
1115 default: {
1116 __ movptr(Address(rbp, -wordSize), rax);
1117 }
1118 }
1119 }
1121 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1122 // We always ignore the frame_slots arg and just use the space just below frame pointer
1123 // which by this time is free to use
1124 switch (ret_type) {
1125 case T_FLOAT:
1126 __ movflt(xmm0, Address(rbp, -wordSize));
1127 break;
1128 case T_DOUBLE:
1129 __ movdbl(xmm0, Address(rbp, -wordSize));
1130 break;
1131 case T_VOID: break;
1132 default: {
1133 __ movptr(rax, Address(rbp, -wordSize));
1134 }
1135 }
1136 }
1138 static void save_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
1139 for ( int i = first_arg ; i < arg_count ; i++ ) {
1140 if (args[i].first()->is_Register()) {
1141 __ push(args[i].first()->as_Register());
1142 } else if (args[i].first()->is_XMMRegister()) {
1143 __ subptr(rsp, 2*wordSize);
1144 __ movdbl(Address(rsp, 0), args[i].first()->as_XMMRegister());
1145 }
1146 }
1147 }
1149 static void restore_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
1150 for ( int i = arg_count - 1 ; i >= first_arg ; i-- ) {
1151 if (args[i].first()->is_Register()) {
1152 __ pop(args[i].first()->as_Register());
1153 } else if (args[i].first()->is_XMMRegister()) {
1154 __ movdbl(args[i].first()->as_XMMRegister(), Address(rsp, 0));
1155 __ addptr(rsp, 2*wordSize);
1156 }
1157 }
1158 }
1160 // ---------------------------------------------------------------------------
1161 // Generate a native wrapper for a given method. The method takes arguments
1162 // in the Java compiled code convention, marshals them to the native
1163 // convention (handlizes oops, etc), transitions to native, makes the call,
1164 // returns to java state (possibly blocking), unhandlizes any result and
1165 // returns.
1166 nmethod *SharedRuntime::generate_native_wrapper(MacroAssembler *masm,
1167 methodHandle method,
1168 int total_in_args,
1169 int comp_args_on_stack,
1170 BasicType *in_sig_bt,
1171 VMRegPair *in_regs,
1172 BasicType ret_type) {
1173 // Native nmethod wrappers never take possesion of the oop arguments.
1174 // So the caller will gc the arguments. The only thing we need an
1175 // oopMap for is if the call is static
1176 //
1177 // An OopMap for lock (and class if static)
1178 OopMapSet *oop_maps = new OopMapSet();
1179 intptr_t start = (intptr_t)__ pc();
1181 // We have received a description of where all the java arg are located
1182 // on entry to the wrapper. We need to convert these args to where
1183 // the jni function will expect them. To figure out where they go
1184 // we convert the java signature to a C signature by inserting
1185 // the hidden arguments as arg[0] and possibly arg[1] (static method)
1187 int total_c_args = total_in_args + 1;
1188 if (method->is_static()) {
1189 total_c_args++;
1190 }
1192 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
1193 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
1195 int argc = 0;
1196 out_sig_bt[argc++] = T_ADDRESS;
1197 if (method->is_static()) {
1198 out_sig_bt[argc++] = T_OBJECT;
1199 }
1201 for (int i = 0; i < total_in_args ; i++ ) {
1202 out_sig_bt[argc++] = in_sig_bt[i];
1203 }
1205 // Now figure out where the args must be stored and how much stack space
1206 // they require.
1207 //
1208 int out_arg_slots;
1209 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);
1211 // Compute framesize for the wrapper. We need to handlize all oops in
1212 // incoming registers
1214 // Calculate the total number of stack slots we will need.
1216 // First count the abi requirement plus all of the outgoing args
1217 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
1219 // Now the space for the inbound oop handle area
1221 int oop_handle_offset = stack_slots;
1222 stack_slots += 6*VMRegImpl::slots_per_word;
1224 // Now any space we need for handlizing a klass if static method
1226 int oop_temp_slot_offset = 0;
1227 int klass_slot_offset = 0;
1228 int klass_offset = -1;
1229 int lock_slot_offset = 0;
1230 bool is_static = false;
1232 if (method->is_static()) {
1233 klass_slot_offset = stack_slots;
1234 stack_slots += VMRegImpl::slots_per_word;
1235 klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
1236 is_static = true;
1237 }
1239 // Plus a lock if needed
1241 if (method->is_synchronized()) {
1242 lock_slot_offset = stack_slots;
1243 stack_slots += VMRegImpl::slots_per_word;
1244 }
1246 // Now a place (+2) to save return values or temp during shuffling
1247 // + 4 for return address (which we own) and saved rbp
1248 stack_slots += 6;
1250 // Ok The space we have allocated will look like:
1251 //
1252 //
1253 // FP-> | |
1254 // |---------------------|
1255 // | 2 slots for moves |
1256 // |---------------------|
1257 // | lock box (if sync) |
1258 // |---------------------| <- lock_slot_offset
1259 // | klass (if static) |
1260 // |---------------------| <- klass_slot_offset
1261 // | oopHandle area |
1262 // |---------------------| <- oop_handle_offset (6 java arg registers)
1263 // | outbound memory |
1264 // | based arguments |
1265 // | |
1266 // |---------------------|
1267 // | |
1268 // SP-> | out_preserved_slots |
1269 //
1270 //
1273 // Now compute actual number of stack words we need rounding to make
1274 // stack properly aligned.
1275 stack_slots = round_to(stack_slots, StackAlignmentInSlots);
1277 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
1280 // First thing make an ic check to see if we should even be here
1282 // We are free to use all registers as temps without saving them and
1283 // restoring them except rbp. rbp is the only callee save register
1284 // as far as the interpreter and the compiler(s) are concerned.
1287 const Register ic_reg = rax;
1288 const Register receiver = j_rarg0;
1290 Label ok;
1291 Label exception_pending;
1293 assert_different_registers(ic_reg, receiver, rscratch1);
1294 __ verify_oop(receiver);
1295 __ load_klass(rscratch1, receiver);
1296 __ cmpq(ic_reg, rscratch1);
1297 __ jcc(Assembler::equal, ok);
1299 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1301 __ bind(ok);
1303 // Verified entry point must be aligned
1304 __ align(8);
1306 int vep_offset = ((intptr_t)__ pc()) - start;
1308 // The instruction at the verified entry point must be 5 bytes or longer
1309 // because it can be patched on the fly by make_non_entrant. The stack bang
1310 // instruction fits that requirement.
1312 // Generate stack overflow check
1314 if (UseStackBanging) {
1315 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
1316 } else {
1317 // need a 5 byte instruction to allow MT safe patching to non-entrant
1318 __ fat_nop();
1319 }
1321 // Generate a new frame for the wrapper.
1322 __ enter();
1323 // -2 because return address is already present and so is saved rbp
1324 __ subptr(rsp, stack_size - 2*wordSize);
1326 // Frame is now completed as far as size and linkage.
1328 int frame_complete = ((intptr_t)__ pc()) - start;
1330 #ifdef ASSERT
1331 {
1332 Label L;
1333 __ mov(rax, rsp);
1334 __ andptr(rax, -16); // must be 16 byte boundary (see amd64 ABI)
1335 __ cmpptr(rax, rsp);
1336 __ jcc(Assembler::equal, L);
1337 __ stop("improperly aligned stack");
1338 __ bind(L);
1339 }
1340 #endif /* ASSERT */
1343 // We use r14 as the oop handle for the receiver/klass
1344 // It is callee save so it survives the call to native
1346 const Register oop_handle_reg = r14;
1350 //
1351 // We immediately shuffle the arguments so that any vm call we have to
1352 // make from here on out (sync slow path, jvmti, etc.) we will have
1353 // captured the oops from our caller and have a valid oopMap for
1354 // them.
1356 // -----------------
1357 // The Grand Shuffle
1359 // The Java calling convention is either equal (linux) or denser (win64) than the
1360 // c calling convention. However the because of the jni_env argument the c calling
1361 // convention always has at least one more (and two for static) arguments than Java.
1362 // Therefore if we move the args from java -> c backwards then we will never have
1363 // a register->register conflict and we don't have to build a dependency graph
1364 // and figure out how to break any cycles.
1365 //
1367 // Record esp-based slot for receiver on stack for non-static methods
1368 int receiver_offset = -1;
1370 // This is a trick. We double the stack slots so we can claim
1371 // the oops in the caller's frame. Since we are sure to have
1372 // more args than the caller doubling is enough to make
1373 // sure we can capture all the incoming oop args from the
1374 // caller.
1375 //
1376 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1378 // Mark location of rbp (someday)
1379 // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, vmreg(rbp));
1381 // Use eax, ebx as temporaries during any memory-memory moves we have to do
1382 // All inbound args are referenced based on rbp and all outbound args via rsp.
1385 #ifdef ASSERT
1386 bool reg_destroyed[RegisterImpl::number_of_registers];
1387 bool freg_destroyed[XMMRegisterImpl::number_of_registers];
1388 for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {
1389 reg_destroyed[r] = false;
1390 }
1391 for ( int f = 0 ; f < XMMRegisterImpl::number_of_registers ; f++ ) {
1392 freg_destroyed[f] = false;
1393 }
1395 #endif /* ASSERT */
1398 int c_arg = total_c_args - 1;
1399 for ( int i = total_in_args - 1; i >= 0 ; i--, c_arg-- ) {
1400 #ifdef ASSERT
1401 if (in_regs[i].first()->is_Register()) {
1402 assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "destroyed reg!");
1403 } else if (in_regs[i].first()->is_XMMRegister()) {
1404 assert(!freg_destroyed[in_regs[i].first()->as_XMMRegister()->encoding()], "destroyed reg!");
1405 }
1406 if (out_regs[c_arg].first()->is_Register()) {
1407 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
1408 } else if (out_regs[c_arg].first()->is_XMMRegister()) {
1409 freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;
1410 }
1411 #endif /* ASSERT */
1412 switch (in_sig_bt[i]) {
1413 case T_ARRAY:
1414 case T_OBJECT:
1415 object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
1416 ((i == 0) && (!is_static)),
1417 &receiver_offset);
1418 break;
1419 case T_VOID:
1420 break;
1422 case T_FLOAT:
1423 float_move(masm, in_regs[i], out_regs[c_arg]);
1424 break;
1426 case T_DOUBLE:
1427 assert( i + 1 < total_in_args &&
1428 in_sig_bt[i + 1] == T_VOID &&
1429 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
1430 double_move(masm, in_regs[i], out_regs[c_arg]);
1431 break;
1433 case T_LONG :
1434 long_move(masm, in_regs[i], out_regs[c_arg]);
1435 break;
1437 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
1439 default:
1440 move32_64(masm, in_regs[i], out_regs[c_arg]);
1441 }
1442 }
1444 // point c_arg at the first arg that is already loaded in case we
1445 // need to spill before we call out
1446 c_arg++;
1448 // Pre-load a static method's oop into r14. Used both by locking code and
1449 // the normal JNI call code.
1450 if (method->is_static()) {
1452 // load oop into a register
1453 __ movoop(oop_handle_reg, JNIHandles::make_local(Klass::cast(method->method_holder())->java_mirror()));
1455 // Now handlize the static class mirror it's known not-null.
1456 __ movptr(Address(rsp, klass_offset), oop_handle_reg);
1457 map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
1459 // Now get the handle
1460 __ lea(oop_handle_reg, Address(rsp, klass_offset));
1461 // store the klass handle as second argument
1462 __ movptr(c_rarg1, oop_handle_reg);
1463 // and protect the arg if we must spill
1464 c_arg--;
1465 }
1467 // Change state to native (we save the return address in the thread, since it might not
1468 // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
1469 // points into the right code segment. It does not have to be the correct return pc.
1470 // We use the same pc/oopMap repeatedly when we call out
1472 intptr_t the_pc = (intptr_t) __ pc();
1473 oop_maps->add_gc_map(the_pc - start, map);
1475 __ set_last_Java_frame(rsp, noreg, (address)the_pc);
1478 // We have all of the arguments setup at this point. We must not touch any register
1479 // argument registers at this point (what if we save/restore them there are no oop?
1481 {
1482 SkipIfEqual skip(masm, &DTraceMethodProbes, false);
1483 // protect the args we've loaded
1484 save_args(masm, total_c_args, c_arg, out_regs);
1485 __ movoop(c_rarg1, JNIHandles::make_local(method()));
1486 __ call_VM_leaf(
1487 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1488 r15_thread, c_rarg1);
1489 restore_args(masm, total_c_args, c_arg, out_regs);
1490 }
1492 // RedefineClasses() tracing support for obsolete method entry
1493 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
1494 // protect the args we've loaded
1495 save_args(masm, total_c_args, c_arg, out_regs);
1496 __ movoop(c_rarg1, JNIHandles::make_local(method()));
1497 __ call_VM_leaf(
1498 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1499 r15_thread, c_rarg1);
1500 restore_args(masm, total_c_args, c_arg, out_regs);
1501 }
1503 // Lock a synchronized method
1505 // Register definitions used by locking and unlocking
1507 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
1508 const Register obj_reg = rbx; // Will contain the oop
1509 const Register lock_reg = r13; // Address of compiler lock object (BasicLock)
1510 const Register old_hdr = r13; // value of old header at unlock time
1512 Label slow_path_lock;
1513 Label lock_done;
1515 if (method->is_synchronized()) {
1518 const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();
1520 // Get the handle (the 2nd argument)
1521 __ mov(oop_handle_reg, c_rarg1);
1523 // Get address of the box
1525 __ lea(lock_reg, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
1527 // Load the oop from the handle
1528 __ movptr(obj_reg, Address(oop_handle_reg, 0));
1530 if (UseBiasedLocking) {
1531 __ biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, lock_done, &slow_path_lock);
1532 }
1534 // Load immediate 1 into swap_reg %rax
1535 __ movl(swap_reg, 1);
1537 // Load (object->mark() | 1) into swap_reg %rax
1538 __ orptr(swap_reg, Address(obj_reg, 0));
1540 // Save (object->mark() | 1) into BasicLock's displaced header
1541 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
1543 if (os::is_MP()) {
1544 __ lock();
1545 }
1547 // src -> dest iff dest == rax else rax <- dest
1548 __ cmpxchgptr(lock_reg, Address(obj_reg, 0));
1549 __ jcc(Assembler::equal, lock_done);
1551 // Hmm should this move to the slow path code area???
1553 // Test if the oopMark is an obvious stack pointer, i.e.,
1554 // 1) (mark & 3) == 0, and
1555 // 2) rsp <= mark < mark + os::pagesize()
1556 // These 3 tests can be done by evaluating the following
1557 // expression: ((mark - rsp) & (3 - os::vm_page_size())),
1558 // assuming both stack pointer and pagesize have their
1559 // least significant 2 bits clear.
1560 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg
1562 __ subptr(swap_reg, rsp);
1563 __ andptr(swap_reg, 3 - os::vm_page_size());
1565 // Save the test result, for recursive case, the result is zero
1566 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
1567 __ jcc(Assembler::notEqual, slow_path_lock);
1569 // Slow path will re-enter here
1571 __ bind(lock_done);
1572 }
1575 // Finally just about ready to make the JNI call
1578 // get JNIEnv* which is first argument to native
1580 __ lea(c_rarg0, Address(r15_thread, in_bytes(JavaThread::jni_environment_offset())));
1582 // Now set thread in native
1583 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native);
1585 __ call(RuntimeAddress(method->native_function()));
1587 // Either restore the MXCSR register after returning from the JNI Call
1588 // or verify that it wasn't changed.
1589 if (RestoreMXCSROnJNICalls) {
1590 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
1592 }
1593 else if (CheckJNICalls ) {
1594 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::x86::verify_mxcsr_entry())));
1595 }
1598 // Unpack native results.
1599 switch (ret_type) {
1600 case T_BOOLEAN: __ c2bool(rax); break;
1601 case T_CHAR : __ movzwl(rax, rax); break;
1602 case T_BYTE : __ sign_extend_byte (rax); break;
1603 case T_SHORT : __ sign_extend_short(rax); break;
1604 case T_INT : /* nothing to do */ break;
1605 case T_DOUBLE :
1606 case T_FLOAT :
1607 // Result is in xmm0 we'll save as needed
1608 break;
1609 case T_ARRAY: // Really a handle
1610 case T_OBJECT: // Really a handle
1611 break; // can't de-handlize until after safepoint check
1612 case T_VOID: break;
1613 case T_LONG: break;
1614 default : ShouldNotReachHere();
1615 }
1617 // Switch thread to "native transition" state before reading the synchronization state.
1618 // This additional state is necessary because reading and testing the synchronization
1619 // state is not atomic w.r.t. GC, as this scenario demonstrates:
1620 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
1621 // VM thread changes sync state to synchronizing and suspends threads for GC.
1622 // Thread A is resumed to finish this native method, but doesn't block here since it
1623 // didn't see any synchronization is progress, and escapes.
1624 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
1626 if(os::is_MP()) {
1627 if (UseMembar) {
1628 // Force this write out before the read below
1629 __ membar(Assembler::Membar_mask_bits(
1630 Assembler::LoadLoad | Assembler::LoadStore |
1631 Assembler::StoreLoad | Assembler::StoreStore));
1632 } else {
1633 // Write serialization page so VM thread can do a pseudo remote membar.
1634 // We use the current thread pointer to calculate a thread specific
1635 // offset to write to within the page. This minimizes bus traffic
1636 // due to cache line collision.
1637 __ serialize_memory(r15_thread, rcx);
1638 }
1639 }
1642 // check for safepoint operation in progress and/or pending suspend requests
1643 {
1644 Label Continue;
1646 __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
1647 SafepointSynchronize::_not_synchronized);
1649 Label L;
1650 __ jcc(Assembler::notEqual, L);
1651 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
1652 __ jcc(Assembler::equal, Continue);
1653 __ bind(L);
1655 // Don't use call_VM as it will see a possible pending exception and forward it
1656 // and never return here preventing us from clearing _last_native_pc down below.
1657 // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
1658 // preserved and correspond to the bcp/locals pointers. So we do a runtime call
1659 // by hand.
1660 //
1661 save_native_result(masm, ret_type, stack_slots);
1662 __ mov(c_rarg0, r15_thread);
1663 __ mov(r12, rsp); // remember sp
1664 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1665 __ andptr(rsp, -16); // align stack as required by ABI
1666 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
1667 __ mov(rsp, r12); // restore sp
1668 __ reinit_heapbase();
1669 // Restore any method result value
1670 restore_native_result(masm, ret_type, stack_slots);
1671 __ bind(Continue);
1672 }
1674 // change thread state
1675 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
1677 Label reguard;
1678 Label reguard_done;
1679 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
1680 __ jcc(Assembler::equal, reguard);
1681 __ bind(reguard_done);
1683 // native result if any is live
1685 // Unlock
1686 Label unlock_done;
1687 Label slow_path_unlock;
1688 if (method->is_synchronized()) {
1690 // Get locked oop from the handle we passed to jni
1691 __ movptr(obj_reg, Address(oop_handle_reg, 0));
1693 Label done;
1695 if (UseBiasedLocking) {
1696 __ biased_locking_exit(obj_reg, old_hdr, done);
1697 }
1699 // Simple recursive lock?
1701 __ cmpptr(Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size), (int32_t)NULL_WORD);
1702 __ jcc(Assembler::equal, done);
1704 // Must save rax if if it is live now because cmpxchg must use it
1705 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
1706 save_native_result(masm, ret_type, stack_slots);
1707 }
1710 // get address of the stack lock
1711 __ lea(rax, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
1712 // get old displaced header
1713 __ movptr(old_hdr, Address(rax, 0));
1715 // Atomic swap old header if oop still contains the stack lock
1716 if (os::is_MP()) {
1717 __ lock();
1718 }
1719 __ cmpxchgptr(old_hdr, Address(obj_reg, 0));
1720 __ jcc(Assembler::notEqual, slow_path_unlock);
1722 // slow path re-enters here
1723 __ bind(unlock_done);
1724 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
1725 restore_native_result(masm, ret_type, stack_slots);
1726 }
1728 __ bind(done);
1730 }
1731 {
1732 SkipIfEqual skip(masm, &DTraceMethodProbes, false);
1733 save_native_result(masm, ret_type, stack_slots);
1734 __ movoop(c_rarg1, JNIHandles::make_local(method()));
1735 __ call_VM_leaf(
1736 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1737 r15_thread, c_rarg1);
1738 restore_native_result(masm, ret_type, stack_slots);
1739 }
1741 __ reset_last_Java_frame(false, true);
1743 // Unpack oop result
1744 if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
1745 Label L;
1746 __ testptr(rax, rax);
1747 __ jcc(Assembler::zero, L);
1748 __ movptr(rax, Address(rax, 0));
1749 __ bind(L);
1750 __ verify_oop(rax);
1751 }
1753 // reset handle block
1754 __ movptr(rcx, Address(r15_thread, JavaThread::active_handles_offset()));
1755 __ movptr(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
1757 // pop our frame
1759 __ leave();
1761 // Any exception pending?
1762 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
1763 __ jcc(Assembler::notEqual, exception_pending);
1765 // Return
1767 __ ret(0);
1769 // Unexpected paths are out of line and go here
1771 // forward the exception
1772 __ bind(exception_pending);
1774 // and forward the exception
1775 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
1778 // Slow path locking & unlocking
1779 if (method->is_synchronized()) {
1781 // BEGIN Slow path lock
1782 __ bind(slow_path_lock);
1784 // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
1785 // args are (oop obj, BasicLock* lock, JavaThread* thread)
1787 // protect the args we've loaded
1788 save_args(masm, total_c_args, c_arg, out_regs);
1790 __ mov(c_rarg0, obj_reg);
1791 __ mov(c_rarg1, lock_reg);
1792 __ mov(c_rarg2, r15_thread);
1794 // Not a leaf but we have last_Java_frame setup as we want
1795 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), 3);
1796 restore_args(masm, total_c_args, c_arg, out_regs);
1798 #ifdef ASSERT
1799 { Label L;
1800 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
1801 __ jcc(Assembler::equal, L);
1802 __ stop("no pending exception allowed on exit from monitorenter");
1803 __ bind(L);
1804 }
1805 #endif
1806 __ jmp(lock_done);
1808 // END Slow path lock
1810 // BEGIN Slow path unlock
1811 __ bind(slow_path_unlock);
1813 // If we haven't already saved the native result we must save it now as xmm registers
1814 // are still exposed.
1816 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
1817 save_native_result(masm, ret_type, stack_slots);
1818 }
1820 __ lea(c_rarg1, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
1822 __ mov(c_rarg0, obj_reg);
1823 __ mov(r12, rsp); // remember sp
1824 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1825 __ andptr(rsp, -16); // align stack as required by ABI
1827 // Save pending exception around call to VM (which contains an EXCEPTION_MARK)
1828 // NOTE that obj_reg == rbx currently
1829 __ movptr(rbx, Address(r15_thread, in_bytes(Thread::pending_exception_offset())));
1830 __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
1832 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
1833 __ mov(rsp, r12); // restore sp
1834 __ reinit_heapbase();
1835 #ifdef ASSERT
1836 {
1837 Label L;
1838 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
1839 __ jcc(Assembler::equal, L);
1840 __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
1841 __ bind(L);
1842 }
1843 #endif /* ASSERT */
1845 __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), rbx);
1847 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
1848 restore_native_result(masm, ret_type, stack_slots);
1849 }
1850 __ jmp(unlock_done);
1852 // END Slow path unlock
1854 } // synchronized
1856 // SLOW PATH Reguard the stack if needed
1858 __ bind(reguard);
1859 save_native_result(masm, ret_type, stack_slots);
1860 __ mov(r12, rsp); // remember sp
1861 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1862 __ andptr(rsp, -16); // align stack as required by ABI
1863 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1864 __ mov(rsp, r12); // restore sp
1865 __ reinit_heapbase();
1866 restore_native_result(masm, ret_type, stack_slots);
1867 // and continue
1868 __ jmp(reguard_done);
1872 __ flush();
1874 nmethod *nm = nmethod::new_native_nmethod(method,
1875 masm->code(),
1876 vep_offset,
1877 frame_complete,
1878 stack_slots / VMRegImpl::slots_per_word,
1879 (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
1880 in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
1881 oop_maps);
1882 return nm;
1884 }
1886 #ifdef HAVE_DTRACE_H
1887 // ---------------------------------------------------------------------------
1888 // Generate a dtrace nmethod for a given signature. The method takes arguments
1889 // in the Java compiled code convention, marshals them to the native
1890 // abi and then leaves nops at the position you would expect to call a native
1891 // function. When the probe is enabled the nops are replaced with a trap
1892 // instruction that dtrace inserts and the trace will cause a notification
1893 // to dtrace.
1894 //
1895 // The probes are only able to take primitive types and java/lang/String as
1896 // arguments. No other java types are allowed. Strings are converted to utf8
1897 // strings so that from dtrace point of view java strings are converted to C
1898 // strings. There is an arbitrary fixed limit on the total space that a method
1899 // can use for converting the strings. (256 chars per string in the signature).
1900 // So any java string larger then this is truncated.
1902 static int fp_offset[ConcreteRegisterImpl::number_of_registers] = { 0 };
1903 static bool offsets_initialized = false;
1906 nmethod *SharedRuntime::generate_dtrace_nmethod(MacroAssembler *masm,
1907 methodHandle method) {
1910 // generate_dtrace_nmethod is guarded by a mutex so we are sure to
1911 // be single threaded in this method.
1912 assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");
1914 if (!offsets_initialized) {
1915 fp_offset[c_rarg0->as_VMReg()->value()] = -1 * wordSize;
1916 fp_offset[c_rarg1->as_VMReg()->value()] = -2 * wordSize;
1917 fp_offset[c_rarg2->as_VMReg()->value()] = -3 * wordSize;
1918 fp_offset[c_rarg3->as_VMReg()->value()] = -4 * wordSize;
1919 fp_offset[c_rarg4->as_VMReg()->value()] = -5 * wordSize;
1920 fp_offset[c_rarg5->as_VMReg()->value()] = -6 * wordSize;
1922 fp_offset[c_farg0->as_VMReg()->value()] = -7 * wordSize;
1923 fp_offset[c_farg1->as_VMReg()->value()] = -8 * wordSize;
1924 fp_offset[c_farg2->as_VMReg()->value()] = -9 * wordSize;
1925 fp_offset[c_farg3->as_VMReg()->value()] = -10 * wordSize;
1926 fp_offset[c_farg4->as_VMReg()->value()] = -11 * wordSize;
1927 fp_offset[c_farg5->as_VMReg()->value()] = -12 * wordSize;
1928 fp_offset[c_farg6->as_VMReg()->value()] = -13 * wordSize;
1929 fp_offset[c_farg7->as_VMReg()->value()] = -14 * wordSize;
1931 offsets_initialized = true;
1932 }
1933 // Fill in the signature array, for the calling-convention call.
1934 int total_args_passed = method->size_of_parameters();
1936 BasicType* in_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
1937 VMRegPair *in_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);
1939 // The signature we are going to use for the trap that dtrace will see
1940 // java/lang/String is converted. We drop "this" and any other object
1941 // is converted to NULL. (A one-slot java/lang/Long object reference
1942 // is converted to a two-slot long, which is why we double the allocation).
1943 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
1944 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);
1946 int i=0;
1947 int total_strings = 0;
1948 int first_arg_to_pass = 0;
1949 int total_c_args = 0;
1951 // Skip the receiver as dtrace doesn't want to see it
1952 if( !method->is_static() ) {
1953 in_sig_bt[i++] = T_OBJECT;
1954 first_arg_to_pass = 1;
1955 }
1957 // We need to convert the java args to where a native (non-jni) function
1958 // would expect them. To figure out where they go we convert the java
1959 // signature to a C signature.
1961 SignatureStream ss(method->signature());
1962 for ( ; !ss.at_return_type(); ss.next()) {
1963 BasicType bt = ss.type();
1964 in_sig_bt[i++] = bt; // Collect remaining bits of signature
1965 out_sig_bt[total_c_args++] = bt;
1966 if( bt == T_OBJECT) {
1967 symbolOop s = ss.as_symbol_or_null();
1968 if (s == vmSymbols::java_lang_String()) {
1969 total_strings++;
1970 out_sig_bt[total_c_args-1] = T_ADDRESS;
1971 } else if (s == vmSymbols::java_lang_Boolean() ||
1972 s == vmSymbols::java_lang_Character() ||
1973 s == vmSymbols::java_lang_Byte() ||
1974 s == vmSymbols::java_lang_Short() ||
1975 s == vmSymbols::java_lang_Integer() ||
1976 s == vmSymbols::java_lang_Float()) {
1977 out_sig_bt[total_c_args-1] = T_INT;
1978 } else if (s == vmSymbols::java_lang_Long() ||
1979 s == vmSymbols::java_lang_Double()) {
1980 out_sig_bt[total_c_args-1] = T_LONG;
1981 out_sig_bt[total_c_args++] = T_VOID;
1982 }
1983 } else if ( bt == T_LONG || bt == T_DOUBLE ) {
1984 in_sig_bt[i++] = T_VOID; // Longs & doubles take 2 Java slots
1985 // We convert double to long
1986 out_sig_bt[total_c_args-1] = T_LONG;
1987 out_sig_bt[total_c_args++] = T_VOID;
1988 } else if ( bt == T_FLOAT) {
1989 // We convert float to int
1990 out_sig_bt[total_c_args-1] = T_INT;
1991 }
1992 }
1994 assert(i==total_args_passed, "validly parsed signature");
1996 // Now get the compiled-Java layout as input arguments
1997 int comp_args_on_stack;
1998 comp_args_on_stack = SharedRuntime::java_calling_convention(
1999 in_sig_bt, in_regs, total_args_passed, false);
2001 // Now figure out where the args must be stored and how much stack space
2002 // they require (neglecting out_preserve_stack_slots but space for storing
2003 // the 1st six register arguments). It's weird see int_stk_helper.
2005 int out_arg_slots;
2006 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args);
2008 // Calculate the total number of stack slots we will need.
2010 // First count the abi requirement plus all of the outgoing args
2011 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
2013 // Now space for the string(s) we must convert
2014 int* string_locs = NEW_RESOURCE_ARRAY(int, total_strings + 1);
2015 for (i = 0; i < total_strings ; i++) {
2016 string_locs[i] = stack_slots;
2017 stack_slots += max_dtrace_string_size / VMRegImpl::stack_slot_size;
2018 }
2020 // Plus the temps we might need to juggle register args
2021 // regs take two slots each
2022 stack_slots += (Argument::n_int_register_parameters_c +
2023 Argument::n_float_register_parameters_c) * 2;
2026 // + 4 for return address (which we own) and saved rbp,
2028 stack_slots += 4;
2030 // Ok The space we have allocated will look like:
2031 //
2032 //
2033 // FP-> | |
2034 // |---------------------|
2035 // | string[n] |
2036 // |---------------------| <- string_locs[n]
2037 // | string[n-1] |
2038 // |---------------------| <- string_locs[n-1]
2039 // | ... |
2040 // | ... |
2041 // |---------------------| <- string_locs[1]
2042 // | string[0] |
2043 // |---------------------| <- string_locs[0]
2044 // | outbound memory |
2045 // | based arguments |
2046 // | |
2047 // |---------------------|
2048 // | |
2049 // SP-> | out_preserved_slots |
2050 //
2051 //
2053 // Now compute actual number of stack words we need rounding to make
2054 // stack properly aligned.
2055 stack_slots = round_to(stack_slots, 4 * VMRegImpl::slots_per_word);
2057 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
2059 intptr_t start = (intptr_t)__ pc();
2061 // First thing make an ic check to see if we should even be here
2063 // We are free to use all registers as temps without saving them and
2064 // restoring them except rbp. rbp, is the only callee save register
2065 // as far as the interpreter and the compiler(s) are concerned.
2067 const Register ic_reg = rax;
2068 const Register receiver = rcx;
2069 Label hit;
2070 Label exception_pending;
2073 __ verify_oop(receiver);
2074 __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
2075 __ jcc(Assembler::equal, hit);
2077 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
2079 // verified entry must be aligned for code patching.
2080 // and the first 5 bytes must be in the same cache line
2081 // if we align at 8 then we will be sure 5 bytes are in the same line
2082 __ align(8);
2084 __ bind(hit);
2086 int vep_offset = ((intptr_t)__ pc()) - start;
2089 // The instruction at the verified entry point must be 5 bytes or longer
2090 // because it can be patched on the fly by make_non_entrant. The stack bang
2091 // instruction fits that requirement.
2093 // Generate stack overflow check
2095 if (UseStackBanging) {
2096 if (stack_size <= StackShadowPages*os::vm_page_size()) {
2097 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
2098 } else {
2099 __ movl(rax, stack_size);
2100 __ bang_stack_size(rax, rbx);
2101 }
2102 } else {
2103 // need a 5 byte instruction to allow MT safe patching to non-entrant
2104 __ fat_nop();
2105 }
2107 assert(((uintptr_t)__ pc() - start - vep_offset) >= 5,
2108 "valid size for make_non_entrant");
2110 // Generate a new frame for the wrapper.
2111 __ enter();
2113 // -4 because return address is already present and so is saved rbp,
2114 if (stack_size - 2*wordSize != 0) {
2115 __ subq(rsp, stack_size - 2*wordSize);
2116 }
2118 // Frame is now completed as far a size and linkage.
2120 int frame_complete = ((intptr_t)__ pc()) - start;
2122 int c_arg, j_arg;
2124 // State of input register args
2126 bool live[ConcreteRegisterImpl::number_of_registers];
2128 live[j_rarg0->as_VMReg()->value()] = false;
2129 live[j_rarg1->as_VMReg()->value()] = false;
2130 live[j_rarg2->as_VMReg()->value()] = false;
2131 live[j_rarg3->as_VMReg()->value()] = false;
2132 live[j_rarg4->as_VMReg()->value()] = false;
2133 live[j_rarg5->as_VMReg()->value()] = false;
2135 live[j_farg0->as_VMReg()->value()] = false;
2136 live[j_farg1->as_VMReg()->value()] = false;
2137 live[j_farg2->as_VMReg()->value()] = false;
2138 live[j_farg3->as_VMReg()->value()] = false;
2139 live[j_farg4->as_VMReg()->value()] = false;
2140 live[j_farg5->as_VMReg()->value()] = false;
2141 live[j_farg6->as_VMReg()->value()] = false;
2142 live[j_farg7->as_VMReg()->value()] = false;
2145 bool rax_is_zero = false;
2147 // All args (except strings) destined for the stack are moved first
2148 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2149 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2150 VMRegPair src = in_regs[j_arg];
2151 VMRegPair dst = out_regs[c_arg];
2153 // Get the real reg value or a dummy (rsp)
2155 int src_reg = src.first()->is_reg() ?
2156 src.first()->value() :
2157 rsp->as_VMReg()->value();
2159 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
2160 (in_sig_bt[j_arg] == T_OBJECT &&
2161 out_sig_bt[c_arg] != T_INT &&
2162 out_sig_bt[c_arg] != T_ADDRESS &&
2163 out_sig_bt[c_arg] != T_LONG);
2165 live[src_reg] = !useless;
2167 if (dst.first()->is_stack()) {
2169 // Even though a string arg in a register is still live after this loop
2170 // after the string conversion loop (next) it will be dead so we take
2171 // advantage of that now for simpler code to manage live.
2173 live[src_reg] = false;
2174 switch (in_sig_bt[j_arg]) {
2176 case T_ARRAY:
2177 case T_OBJECT:
2178 {
2179 Address stack_dst(rsp, reg2offset_out(dst.first()));
2181 if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
2182 // need to unbox a one-word value
2183 Register in_reg = rax;
2184 if ( src.first()->is_reg() ) {
2185 in_reg = src.first()->as_Register();
2186 } else {
2187 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
2188 rax_is_zero = false;
2189 }
2190 Label skipUnbox;
2191 __ movptr(Address(rsp, reg2offset_out(dst.first())),
2192 (int32_t)NULL_WORD);
2193 __ testq(in_reg, in_reg);
2194 __ jcc(Assembler::zero, skipUnbox);
2196 BasicType bt = out_sig_bt[c_arg];
2197 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
2198 Address src1(in_reg, box_offset);
2199 if ( bt == T_LONG ) {
2200 __ movq(in_reg, src1);
2201 __ movq(stack_dst, in_reg);
2202 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2203 ++c_arg; // skip over T_VOID to keep the loop indices in sync
2204 } else {
2205 __ movl(in_reg, src1);
2206 __ movl(stack_dst, in_reg);
2207 }
2209 __ bind(skipUnbox);
2210 } else if (out_sig_bt[c_arg] != T_ADDRESS) {
2211 // Convert the arg to NULL
2212 if (!rax_is_zero) {
2213 __ xorq(rax, rax);
2214 rax_is_zero = true;
2215 }
2216 __ movq(stack_dst, rax);
2217 }
2218 }
2219 break;
2221 case T_VOID:
2222 break;
2224 case T_FLOAT:
2225 // This does the right thing since we know it is destined for the
2226 // stack
2227 float_move(masm, src, dst);
2228 break;
2230 case T_DOUBLE:
2231 // This does the right thing since we know it is destined for the
2232 // stack
2233 double_move(masm, src, dst);
2234 break;
2236 case T_LONG :
2237 long_move(masm, src, dst);
2238 break;
2240 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
2242 default:
2243 move32_64(masm, src, dst);
2244 }
2245 }
2247 }
2249 // If we have any strings we must store any register based arg to the stack
2250 // This includes any still live xmm registers too.
2252 int sid = 0;
2254 if (total_strings > 0 ) {
2255 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2256 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2257 VMRegPair src = in_regs[j_arg];
2258 VMRegPair dst = out_regs[c_arg];
2260 if (src.first()->is_reg()) {
2261 Address src_tmp(rbp, fp_offset[src.first()->value()]);
2263 // string oops were left untouched by the previous loop even if the
2264 // eventual (converted) arg is destined for the stack so park them
2265 // away now (except for first)
2267 if (out_sig_bt[c_arg] == T_ADDRESS) {
2268 Address utf8_addr = Address(
2269 rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
2270 if (sid != 1) {
2271 // The first string arg won't be killed until after the utf8
2272 // conversion
2273 __ movq(utf8_addr, src.first()->as_Register());
2274 }
2275 } else if (dst.first()->is_reg()) {
2276 if (in_sig_bt[j_arg] == T_FLOAT || in_sig_bt[j_arg] == T_DOUBLE) {
2278 // Convert the xmm register to an int and store it in the reserved
2279 // location for the eventual c register arg
2280 XMMRegister f = src.first()->as_XMMRegister();
2281 if (in_sig_bt[j_arg] == T_FLOAT) {
2282 __ movflt(src_tmp, f);
2283 } else {
2284 __ movdbl(src_tmp, f);
2285 }
2286 } else {
2287 // If the arg is an oop type we don't support don't bother to store
2288 // it remember string was handled above.
2289 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
2290 (in_sig_bt[j_arg] == T_OBJECT &&
2291 out_sig_bt[c_arg] != T_INT &&
2292 out_sig_bt[c_arg] != T_LONG);
2294 if (!useless) {
2295 __ movq(src_tmp, src.first()->as_Register());
2296 }
2297 }
2298 }
2299 }
2300 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
2301 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2302 ++c_arg; // skip over T_VOID to keep the loop indices in sync
2303 }
2304 }
2306 // Now that the volatile registers are safe, convert all the strings
2307 sid = 0;
2309 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2310 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2311 if (out_sig_bt[c_arg] == T_ADDRESS) {
2312 // It's a string
2313 Address utf8_addr = Address(
2314 rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
2315 // The first string we find might still be in the original java arg
2316 // register
2318 VMReg src = in_regs[j_arg].first();
2320 // We will need to eventually save the final argument to the trap
2321 // in the von-volatile location dedicated to src. This is the offset
2322 // from fp we will use.
2323 int src_off = src->is_reg() ?
2324 fp_offset[src->value()] : reg2offset_in(src);
2326 // This is where the argument will eventually reside
2327 VMRegPair dst = out_regs[c_arg];
2329 if (src->is_reg()) {
2330 if (sid == 1) {
2331 __ movq(c_rarg0, src->as_Register());
2332 } else {
2333 __ movq(c_rarg0, utf8_addr);
2334 }
2335 } else {
2336 // arg is still in the original location
2337 __ movq(c_rarg0, Address(rbp, reg2offset_in(src)));
2338 }
2339 Label done, convert;
2341 // see if the oop is NULL
2342 __ testq(c_rarg0, c_rarg0);
2343 __ jcc(Assembler::notEqual, convert);
2345 if (dst.first()->is_reg()) {
2346 // Save the ptr to utf string in the origina src loc or the tmp
2347 // dedicated to it
2348 __ movq(Address(rbp, src_off), c_rarg0);
2349 } else {
2350 __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg0);
2351 }
2352 __ jmp(done);
2354 __ bind(convert);
2356 __ lea(c_rarg1, utf8_addr);
2357 if (dst.first()->is_reg()) {
2358 __ movq(Address(rbp, src_off), c_rarg1);
2359 } else {
2360 __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg1);
2361 }
2362 // And do the conversion
2363 __ call(RuntimeAddress(
2364 CAST_FROM_FN_PTR(address, SharedRuntime::get_utf)));
2366 __ bind(done);
2367 }
2368 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
2369 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2370 ++c_arg; // skip over T_VOID to keep the loop indices in sync
2371 }
2372 }
2373 // The get_utf call killed all the c_arg registers
2374 live[c_rarg0->as_VMReg()->value()] = false;
2375 live[c_rarg1->as_VMReg()->value()] = false;
2376 live[c_rarg2->as_VMReg()->value()] = false;
2377 live[c_rarg3->as_VMReg()->value()] = false;
2378 live[c_rarg4->as_VMReg()->value()] = false;
2379 live[c_rarg5->as_VMReg()->value()] = false;
2381 live[c_farg0->as_VMReg()->value()] = false;
2382 live[c_farg1->as_VMReg()->value()] = false;
2383 live[c_farg2->as_VMReg()->value()] = false;
2384 live[c_farg3->as_VMReg()->value()] = false;
2385 live[c_farg4->as_VMReg()->value()] = false;
2386 live[c_farg5->as_VMReg()->value()] = false;
2387 live[c_farg6->as_VMReg()->value()] = false;
2388 live[c_farg7->as_VMReg()->value()] = false;
2389 }
2391 // Now we can finally move the register args to their desired locations
2393 rax_is_zero = false;
2395 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2396 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2398 VMRegPair src = in_regs[j_arg];
2399 VMRegPair dst = out_regs[c_arg];
2401 // Only need to look for args destined for the interger registers (since we
2402 // convert float/double args to look like int/long outbound)
2403 if (dst.first()->is_reg()) {
2404 Register r = dst.first()->as_Register();
2406 // Check if the java arg is unsupported and thereofre useless
2407 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
2408 (in_sig_bt[j_arg] == T_OBJECT &&
2409 out_sig_bt[c_arg] != T_INT &&
2410 out_sig_bt[c_arg] != T_ADDRESS &&
2411 out_sig_bt[c_arg] != T_LONG);
2414 // If we're going to kill an existing arg save it first
2415 if (live[dst.first()->value()]) {
2416 // you can't kill yourself
2417 if (src.first() != dst.first()) {
2418 __ movq(Address(rbp, fp_offset[dst.first()->value()]), r);
2419 }
2420 }
2421 if (src.first()->is_reg()) {
2422 if (live[src.first()->value()] ) {
2423 if (in_sig_bt[j_arg] == T_FLOAT) {
2424 __ movdl(r, src.first()->as_XMMRegister());
2425 } else if (in_sig_bt[j_arg] == T_DOUBLE) {
2426 __ movdq(r, src.first()->as_XMMRegister());
2427 } else if (r != src.first()->as_Register()) {
2428 if (!useless) {
2429 __ movq(r, src.first()->as_Register());
2430 }
2431 }
2432 } else {
2433 // If the arg is an oop type we don't support don't bother to store
2434 // it
2435 if (!useless) {
2436 if (in_sig_bt[j_arg] == T_DOUBLE ||
2437 in_sig_bt[j_arg] == T_LONG ||
2438 in_sig_bt[j_arg] == T_OBJECT ) {
2439 __ movq(r, Address(rbp, fp_offset[src.first()->value()]));
2440 } else {
2441 __ movl(r, Address(rbp, fp_offset[src.first()->value()]));
2442 }
2443 }
2444 }
2445 live[src.first()->value()] = false;
2446 } else if (!useless) {
2447 // full sized move even for int should be ok
2448 __ movq(r, Address(rbp, reg2offset_in(src.first())));
2449 }
2451 // At this point r has the original java arg in the final location
2452 // (assuming it wasn't useless). If the java arg was an oop
2453 // we have a bit more to do
2455 if (in_sig_bt[j_arg] == T_ARRAY || in_sig_bt[j_arg] == T_OBJECT ) {
2456 if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
2457 // need to unbox a one-word value
2458 Label skip;
2459 __ testq(r, r);
2460 __ jcc(Assembler::equal, skip);
2461 BasicType bt = out_sig_bt[c_arg];
2462 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
2463 Address src1(r, box_offset);
2464 if ( bt == T_LONG ) {
2465 __ movq(r, src1);
2466 } else {
2467 __ movl(r, src1);
2468 }
2469 __ bind(skip);
2471 } else if (out_sig_bt[c_arg] != T_ADDRESS) {
2472 // Convert the arg to NULL
2473 __ xorq(r, r);
2474 }
2475 }
2477 // dst can longer be holding an input value
2478 live[dst.first()->value()] = false;
2479 }
2480 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
2481 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2482 ++c_arg; // skip over T_VOID to keep the loop indices in sync
2483 }
2484 }
2487 // Ok now we are done. Need to place the nop that dtrace wants in order to
2488 // patch in the trap
2489 int patch_offset = ((intptr_t)__ pc()) - start;
2491 __ nop();
2494 // Return
2496 __ leave();
2497 __ ret(0);
2499 __ flush();
2501 nmethod *nm = nmethod::new_dtrace_nmethod(
2502 method, masm->code(), vep_offset, patch_offset, frame_complete,
2503 stack_slots / VMRegImpl::slots_per_word);
2504 return nm;
2506 }
2508 #endif // HAVE_DTRACE_H
2510 // this function returns the adjust size (in number of words) to a c2i adapter
2511 // activation for use during deoptimization
2512 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
2513 return (callee_locals - callee_parameters) * Interpreter::stackElementWords;
2514 }
2517 uint SharedRuntime::out_preserve_stack_slots() {
2518 return 0;
2519 }
2522 //------------------------------generate_deopt_blob----------------------------
2523 void SharedRuntime::generate_deopt_blob() {
2524 // Allocate space for the code
2525 ResourceMark rm;
2526 // Setup code generation tools
2527 CodeBuffer buffer("deopt_blob", 2048, 1024);
2528 MacroAssembler* masm = new MacroAssembler(&buffer);
2529 int frame_size_in_words;
2530 OopMap* map = NULL;
2531 OopMapSet *oop_maps = new OopMapSet();
2533 // -------------
2534 // This code enters when returning to a de-optimized nmethod. A return
2535 // address has been pushed on the the stack, and return values are in
2536 // registers.
2537 // If we are doing a normal deopt then we were called from the patched
2538 // nmethod from the point we returned to the nmethod. So the return
2539 // address on the stack is wrong by NativeCall::instruction_size
2540 // We will adjust the value so it looks like we have the original return
2541 // address on the stack (like when we eagerly deoptimized).
2542 // In the case of an exception pending when deoptimizing, we enter
2543 // with a return address on the stack that points after the call we patched
2544 // into the exception handler. We have the following register state from,
2545 // e.g., the forward exception stub (see stubGenerator_x86_64.cpp).
2546 // rax: exception oop
2547 // rbx: exception handler
2548 // rdx: throwing pc
2549 // So in this case we simply jam rdx into the useless return address and
2550 // the stack looks just like we want.
2551 //
2552 // At this point we need to de-opt. We save the argument return
2553 // registers. We call the first C routine, fetch_unroll_info(). This
2554 // routine captures the return values and returns a structure which
2555 // describes the current frame size and the sizes of all replacement frames.
2556 // The current frame is compiled code and may contain many inlined
2557 // functions, each with their own JVM state. We pop the current frame, then
2558 // push all the new frames. Then we call the C routine unpack_frames() to
2559 // populate these frames. Finally unpack_frames() returns us the new target
2560 // address. Notice that callee-save registers are BLOWN here; they have
2561 // already been captured in the vframeArray at the time the return PC was
2562 // patched.
2563 address start = __ pc();
2564 Label cont;
2566 // Prolog for non exception case!
2568 // Save everything in sight.
2569 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
2571 // Normal deoptimization. Save exec mode for unpack_frames.
2572 __ movl(r14, Deoptimization::Unpack_deopt); // callee-saved
2573 __ jmp(cont);
2575 int reexecute_offset = __ pc() - start;
2577 // Reexecute case
2578 // return address is the pc describes what bci to do re-execute at
2580 // No need to update map as each call to save_live_registers will produce identical oopmap
2581 (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
2583 __ movl(r14, Deoptimization::Unpack_reexecute); // callee-saved
2584 __ jmp(cont);
2586 int exception_offset = __ pc() - start;
2588 // Prolog for exception case
2590 // all registers are dead at this entry point, except for rax, and
2591 // rdx which contain the exception oop and exception pc
2592 // respectively. Set them in TLS and fall thru to the
2593 // unpack_with_exception_in_tls entry point.
2595 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
2596 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), rax);
2598 int exception_in_tls_offset = __ pc() - start;
2600 // new implementation because exception oop is now passed in JavaThread
2602 // Prolog for exception case
2603 // All registers must be preserved because they might be used by LinearScan
2604 // Exceptiop oop and throwing PC are passed in JavaThread
2605 // tos: stack at point of call to method that threw the exception (i.e. only
2606 // args are on the stack, no return address)
2608 // make room on stack for the return address
2609 // It will be patched later with the throwing pc. The correct value is not
2610 // available now because loading it from memory would destroy registers.
2611 __ push(0);
2613 // Save everything in sight.
2614 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
2616 // Now it is safe to overwrite any register
2618 // Deopt during an exception. Save exec mode for unpack_frames.
2619 __ movl(r14, Deoptimization::Unpack_exception); // callee-saved
2621 // load throwing pc from JavaThread and patch it as the return address
2622 // of the current frame. Then clear the field in JavaThread
2624 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
2625 __ movptr(Address(rbp, wordSize), rdx);
2626 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
2628 #ifdef ASSERT
2629 // verify that there is really an exception oop in JavaThread
2630 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
2631 __ verify_oop(rax);
2633 // verify that there is no pending exception
2634 Label no_pending_exception;
2635 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
2636 __ testptr(rax, rax);
2637 __ jcc(Assembler::zero, no_pending_exception);
2638 __ stop("must not have pending exception here");
2639 __ bind(no_pending_exception);
2640 #endif
2642 __ bind(cont);
2644 // Call C code. Need thread and this frame, but NOT official VM entry
2645 // crud. We cannot block on this call, no GC can happen.
2646 //
2647 // UnrollBlock* fetch_unroll_info(JavaThread* thread)
2649 // fetch_unroll_info needs to call last_java_frame().
2651 __ set_last_Java_frame(noreg, noreg, NULL);
2652 #ifdef ASSERT
2653 { Label L;
2654 __ cmpptr(Address(r15_thread,
2655 JavaThread::last_Java_fp_offset()),
2656 (int32_t)0);
2657 __ jcc(Assembler::equal, L);
2658 __ stop("SharedRuntime::generate_deopt_blob: last_Java_fp not cleared");
2659 __ bind(L);
2660 }
2661 #endif // ASSERT
2662 __ mov(c_rarg0, r15_thread);
2663 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));
2665 // Need to have an oopmap that tells fetch_unroll_info where to
2666 // find any register it might need.
2667 oop_maps->add_gc_map(__ pc() - start, map);
2669 __ reset_last_Java_frame(false, false);
2671 // Load UnrollBlock* into rdi
2672 __ mov(rdi, rax);
2674 Label noException;
2675 __ cmpl(r14, Deoptimization::Unpack_exception); // Was exception pending?
2676 __ jcc(Assembler::notEqual, noException);
2677 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
2678 // QQQ this is useless it was NULL above
2679 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
2680 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int32_t)NULL_WORD);
2681 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
2683 __ verify_oop(rax);
2685 // Overwrite the result registers with the exception results.
2686 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
2687 // I think this is useless
2688 __ movptr(Address(rsp, RegisterSaver::rdx_offset_in_bytes()), rdx);
2690 __ bind(noException);
2692 // Only register save data is on the stack.
2693 // Now restore the result registers. Everything else is either dead
2694 // or captured in the vframeArray.
2695 RegisterSaver::restore_result_registers(masm);
2697 // All of the register save area has been popped of the stack. Only the
2698 // return address remains.
2700 // Pop all the frames we must move/replace.
2701 //
2702 // Frame picture (youngest to oldest)
2703 // 1: self-frame (no frame link)
2704 // 2: deopting frame (no frame link)
2705 // 3: caller of deopting frame (could be compiled/interpreted).
2706 //
2707 // Note: by leaving the return address of self-frame on the stack
2708 // and using the size of frame 2 to adjust the stack
2709 // when we are done the return to frame 3 will still be on the stack.
2711 // Pop deoptimized frame
2712 __ movl(rcx, Address(rdi, Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
2713 __ addptr(rsp, rcx);
2715 // rsp should be pointing at the return address to the caller (3)
2717 // Stack bang to make sure there's enough room for these interpreter frames.
2718 if (UseStackBanging) {
2719 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
2720 __ bang_stack_size(rbx, rcx);
2721 }
2723 // Load address of array of frame pcs into rcx
2724 __ movptr(rcx, Address(rdi, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
2726 // Trash the old pc
2727 __ addptr(rsp, wordSize);
2729 // Load address of array of frame sizes into rsi
2730 __ movptr(rsi, Address(rdi, Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
2732 // Load counter into rdx
2733 __ movl(rdx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
2735 // Pick up the initial fp we should save
2736 __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));
2738 // Now adjust the caller's stack to make up for the extra locals
2739 // but record the original sp so that we can save it in the skeletal interpreter
2740 // frame and the stack walking of interpreter_sender will get the unextended sp
2741 // value and not the "real" sp value.
2743 const Register sender_sp = r8;
2745 __ mov(sender_sp, rsp);
2746 __ movl(rbx, Address(rdi,
2747 Deoptimization::UnrollBlock::
2748 caller_adjustment_offset_in_bytes()));
2749 __ subptr(rsp, rbx);
2751 // Push interpreter frames in a loop
2752 Label loop;
2753 __ bind(loop);
2754 __ movptr(rbx, Address(rsi, 0)); // Load frame size
2755 #ifdef CC_INTERP
2756 __ subptr(rbx, 4*wordSize); // we'll push pc and ebp by hand and
2757 #ifdef ASSERT
2758 __ push(0xDEADDEAD); // Make a recognizable pattern
2759 __ push(0xDEADDEAD);
2760 #else /* ASSERT */
2761 __ subptr(rsp, 2*wordSize); // skip the "static long no_param"
2762 #endif /* ASSERT */
2763 #else
2764 __ subptr(rbx, 2*wordSize); // We'll push pc and ebp by hand
2765 #endif // CC_INTERP
2766 __ pushptr(Address(rcx, 0)); // Save return address
2767 __ enter(); // Save old & set new ebp
2768 __ subptr(rsp, rbx); // Prolog
2769 #ifdef CC_INTERP
2770 __ movptr(Address(rbp,
2771 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
2772 sender_sp); // Make it walkable
2773 #else /* CC_INTERP */
2774 // This value is corrected by layout_activation_impl
2775 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
2776 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), sender_sp); // Make it walkable
2777 #endif /* CC_INTERP */
2778 __ mov(sender_sp, rsp); // Pass sender_sp to next frame
2779 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
2780 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
2781 __ decrementl(rdx); // Decrement counter
2782 __ jcc(Assembler::notZero, loop);
2783 __ pushptr(Address(rcx, 0)); // Save final return address
2785 // Re-push self-frame
2786 __ enter(); // Save old & set new ebp
2788 // Allocate a full sized register save area.
2789 // Return address and rbp are in place, so we allocate two less words.
2790 __ subptr(rsp, (frame_size_in_words - 2) * wordSize);
2792 // Restore frame locals after moving the frame
2793 __ movdbl(Address(rsp, RegisterSaver::xmm0_offset_in_bytes()), xmm0);
2794 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
2796 // Call C code. Need thread but NOT official VM entry
2797 // crud. We cannot block on this call, no GC can happen. Call should
2798 // restore return values to their stack-slots with the new SP.
2799 //
2800 // void Deoptimization::unpack_frames(JavaThread* thread, int exec_mode)
2802 // Use rbp because the frames look interpreted now
2803 __ set_last_Java_frame(noreg, rbp, NULL);
2805 __ mov(c_rarg0, r15_thread);
2806 __ movl(c_rarg1, r14); // second arg: exec_mode
2807 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
2809 // Set an oopmap for the call site
2810 oop_maps->add_gc_map(__ pc() - start,
2811 new OopMap( frame_size_in_words, 0 ));
2813 __ reset_last_Java_frame(true, false);
2815 // Collect return values
2816 __ movdbl(xmm0, Address(rsp, RegisterSaver::xmm0_offset_in_bytes()));
2817 __ movptr(rax, Address(rsp, RegisterSaver::rax_offset_in_bytes()));
2818 // I think this is useless (throwing pc?)
2819 __ movptr(rdx, Address(rsp, RegisterSaver::rdx_offset_in_bytes()));
2821 // Pop self-frame.
2822 __ leave(); // Epilog
2824 // Jump to interpreter
2825 __ ret(0);
2827 // Make sure all code is generated
2828 masm->flush();
2830 _deopt_blob = DeoptimizationBlob::create(&buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
2831 _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
2832 }
2834 #ifdef COMPILER2
2835 //------------------------------generate_uncommon_trap_blob--------------------
2836 void SharedRuntime::generate_uncommon_trap_blob() {
2837 // Allocate space for the code
2838 ResourceMark rm;
2839 // Setup code generation tools
2840 CodeBuffer buffer("uncommon_trap_blob", 2048, 1024);
2841 MacroAssembler* masm = new MacroAssembler(&buffer);
2843 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
2845 address start = __ pc();
2847 // Push self-frame. We get here with a return address on the
2848 // stack, so rsp is 8-byte aligned until we allocate our frame.
2849 __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog!
2851 // No callee saved registers. rbp is assumed implicitly saved
2852 __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
2854 // compiler left unloaded_class_index in j_rarg0 move to where the
2855 // runtime expects it.
2856 __ movl(c_rarg1, j_rarg0);
2858 __ set_last_Java_frame(noreg, noreg, NULL);
2860 // Call C code. Need thread but NOT official VM entry
2861 // crud. We cannot block on this call, no GC can happen. Call should
2862 // capture callee-saved registers as well as return values.
2863 // Thread is in rdi already.
2864 //
2865 // UnrollBlock* uncommon_trap(JavaThread* thread, jint unloaded_class_index);
2867 __ mov(c_rarg0, r15_thread);
2868 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));
2870 // Set an oopmap for the call site
2871 OopMapSet* oop_maps = new OopMapSet();
2872 OopMap* map = new OopMap(SimpleRuntimeFrame::framesize, 0);
2874 // location of rbp is known implicitly by the frame sender code
2876 oop_maps->add_gc_map(__ pc() - start, map);
2878 __ reset_last_Java_frame(false, false);
2880 // Load UnrollBlock* into rdi
2881 __ mov(rdi, rax);
2883 // Pop all the frames we must move/replace.
2884 //
2885 // Frame picture (youngest to oldest)
2886 // 1: self-frame (no frame link)
2887 // 2: deopting frame (no frame link)
2888 // 3: caller of deopting frame (could be compiled/interpreted).
2890 // Pop self-frame. We have no frame, and must rely only on rax and rsp.
2891 __ addptr(rsp, (SimpleRuntimeFrame::framesize - 2) << LogBytesPerInt); // Epilog!
2893 // Pop deoptimized frame (int)
2894 __ movl(rcx, Address(rdi,
2895 Deoptimization::UnrollBlock::
2896 size_of_deoptimized_frame_offset_in_bytes()));
2897 __ addptr(rsp, rcx);
2899 // rsp should be pointing at the return address to the caller (3)
2901 // Stack bang to make sure there's enough room for these interpreter frames.
2902 if (UseStackBanging) {
2903 __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
2904 __ bang_stack_size(rbx, rcx);
2905 }
2907 // Load address of array of frame pcs into rcx (address*)
2908 __ movptr(rcx,
2909 Address(rdi,
2910 Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
2912 // Trash the return pc
2913 __ addptr(rsp, wordSize);
2915 // Load address of array of frame sizes into rsi (intptr_t*)
2916 __ movptr(rsi, Address(rdi,
2917 Deoptimization::UnrollBlock::
2918 frame_sizes_offset_in_bytes()));
2920 // Counter
2921 __ movl(rdx, Address(rdi,
2922 Deoptimization::UnrollBlock::
2923 number_of_frames_offset_in_bytes())); // (int)
2925 // Pick up the initial fp we should save
2926 __ movptr(rbp,
2927 Address(rdi,
2928 Deoptimization::UnrollBlock::initial_fp_offset_in_bytes()));
2930 // Now adjust the caller's stack to make up for the extra locals but
2931 // record the original sp so that we can save it in the skeletal
2932 // interpreter frame and the stack walking of interpreter_sender
2933 // will get the unextended sp value and not the "real" sp value.
2935 const Register sender_sp = r8;
2937 __ mov(sender_sp, rsp);
2938 __ movl(rbx, Address(rdi,
2939 Deoptimization::UnrollBlock::
2940 caller_adjustment_offset_in_bytes())); // (int)
2941 __ subptr(rsp, rbx);
2943 // Push interpreter frames in a loop
2944 Label loop;
2945 __ bind(loop);
2946 __ movptr(rbx, Address(rsi, 0)); // Load frame size
2947 __ subptr(rbx, 2 * wordSize); // We'll push pc and rbp by hand
2948 __ pushptr(Address(rcx, 0)); // Save return address
2949 __ enter(); // Save old & set new rbp
2950 __ subptr(rsp, rbx); // Prolog
2951 #ifdef CC_INTERP
2952 __ movptr(Address(rbp,
2953 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
2954 sender_sp); // Make it walkable
2955 #else // CC_INTERP
2956 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize),
2957 sender_sp); // Make it walkable
2958 // This value is corrected by layout_activation_impl
2959 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
2960 #endif // CC_INTERP
2961 __ mov(sender_sp, rsp); // Pass sender_sp to next frame
2962 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
2963 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
2964 __ decrementl(rdx); // Decrement counter
2965 __ jcc(Assembler::notZero, loop);
2966 __ pushptr(Address(rcx, 0)); // Save final return address
2968 // Re-push self-frame
2969 __ enter(); // Save old & set new rbp
2970 __ subptr(rsp, (SimpleRuntimeFrame::framesize - 4) << LogBytesPerInt);
2971 // Prolog
2973 // Use rbp because the frames look interpreted now
2974 __ set_last_Java_frame(noreg, rbp, NULL);
2976 // Call C code. Need thread but NOT official VM entry
2977 // crud. We cannot block on this call, no GC can happen. Call should
2978 // restore return values to their stack-slots with the new SP.
2979 // Thread is in rdi already.
2980 //
2981 // BasicType unpack_frames(JavaThread* thread, int exec_mode);
2983 __ mov(c_rarg0, r15_thread);
2984 __ movl(c_rarg1, Deoptimization::Unpack_uncommon_trap);
2985 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
2987 // Set an oopmap for the call site
2988 oop_maps->add_gc_map(__ pc() - start, new OopMap(SimpleRuntimeFrame::framesize, 0));
2990 __ reset_last_Java_frame(true, false);
2992 // Pop self-frame.
2993 __ leave(); // Epilog
2995 // Jump to interpreter
2996 __ ret(0);
2998 // Make sure all code is generated
2999 masm->flush();
3001 _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps,
3002 SimpleRuntimeFrame::framesize >> 1);
3003 }
3004 #endif // COMPILER2
3007 //------------------------------generate_handler_blob------
3008 //
3009 // Generate a special Compile2Runtime blob that saves all registers,
3010 // and setup oopmap.
3011 //
3012 static SafepointBlob* generate_handler_blob(address call_ptr, bool cause_return) {
3013 assert(StubRoutines::forward_exception_entry() != NULL,
3014 "must be generated before");
3016 ResourceMark rm;
3017 OopMapSet *oop_maps = new OopMapSet();
3018 OopMap* map;
3020 // Allocate space for the code. Setup code generation tools.
3021 CodeBuffer buffer("handler_blob", 2048, 1024);
3022 MacroAssembler* masm = new MacroAssembler(&buffer);
3024 address start = __ pc();
3025 address call_pc = NULL;
3026 int frame_size_in_words;
3028 // Make room for return address (or push it again)
3029 if (!cause_return) {
3030 __ push(rbx);
3031 }
3033 // Save registers, fpu state, and flags
3034 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3036 // The following is basically a call_VM. However, we need the precise
3037 // address of the call in order to generate an oopmap. Hence, we do all the
3038 // work outselves.
3040 __ set_last_Java_frame(noreg, noreg, NULL);
3042 // The return address must always be correct so that frame constructor never
3043 // sees an invalid pc.
3045 if (!cause_return) {
3046 // overwrite the dummy value we pushed on entry
3047 __ movptr(c_rarg0, Address(r15_thread, JavaThread::saved_exception_pc_offset()));
3048 __ movptr(Address(rbp, wordSize), c_rarg0);
3049 }
3051 // Do the call
3052 __ mov(c_rarg0, r15_thread);
3053 __ call(RuntimeAddress(call_ptr));
3055 // Set an oopmap for the call site. This oopmap will map all
3056 // oop-registers and debug-info registers as callee-saved. This
3057 // will allow deoptimization at this safepoint to find all possible
3058 // debug-info recordings, as well as let GC find all oops.
3060 oop_maps->add_gc_map( __ pc() - start, map);
3062 Label noException;
3064 __ reset_last_Java_frame(false, false);
3066 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3067 __ jcc(Assembler::equal, noException);
3069 // Exception pending
3071 RegisterSaver::restore_live_registers(masm);
3073 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3075 // No exception case
3076 __ bind(noException);
3078 // Normal exit, restore registers and exit.
3079 RegisterSaver::restore_live_registers(masm);
3081 __ ret(0);
3083 // Make sure all code is generated
3084 masm->flush();
3086 // Fill-out other meta info
3087 return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
3088 }
3090 //
3091 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
3092 //
3093 // Generate a stub that calls into vm to find out the proper destination
3094 // of a java call. All the argument registers are live at this point
3095 // but since this is generic code we don't know what they are and the caller
3096 // must do any gc of the args.
3097 //
3098 static RuntimeStub* generate_resolve_blob(address destination, const char* name) {
3099 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3101 // allocate space for the code
3102 ResourceMark rm;
3104 CodeBuffer buffer(name, 1000, 512);
3105 MacroAssembler* masm = new MacroAssembler(&buffer);
3107 int frame_size_in_words;
3109 OopMapSet *oop_maps = new OopMapSet();
3110 OopMap* map = NULL;
3112 int start = __ offset();
3114 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3116 int frame_complete = __ offset();
3118 __ set_last_Java_frame(noreg, noreg, NULL);
3120 __ mov(c_rarg0, r15_thread);
3122 __ call(RuntimeAddress(destination));
3125 // Set an oopmap for the call site.
3126 // We need this not only for callee-saved registers, but also for volatile
3127 // registers that the compiler might be keeping live across a safepoint.
3129 oop_maps->add_gc_map( __ offset() - start, map);
3131 // rax contains the address we are going to jump to assuming no exception got installed
3133 // clear last_Java_sp
3134 __ reset_last_Java_frame(false, false);
3135 // check for pending exceptions
3136 Label pending;
3137 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3138 __ jcc(Assembler::notEqual, pending);
3140 // get the returned methodOop
3141 __ movptr(rbx, Address(r15_thread, JavaThread::vm_result_offset()));
3142 __ movptr(Address(rsp, RegisterSaver::rbx_offset_in_bytes()), rbx);
3144 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
3146 RegisterSaver::restore_live_registers(masm);
3148 // We are back the the original state on entry and ready to go.
3150 __ jmp(rax);
3152 // Pending exception after the safepoint
3154 __ bind(pending);
3156 RegisterSaver::restore_live_registers(masm);
3158 // exception pending => remove activation and forward to exception handler
3160 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int)NULL_WORD);
3162 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
3163 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3165 // -------------
3166 // make sure all code is generated
3167 masm->flush();
3169 // return the blob
3170 // frame_size_words or bytes??
3171 return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_in_words, oop_maps, true);
3172 }
3175 void SharedRuntime::generate_stubs() {
3177 _wrong_method_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method),
3178 "wrong_method_stub");
3179 _ic_miss_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method_ic_miss),
3180 "ic_miss_stub");
3181 _resolve_opt_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_opt_virtual_call_C),
3182 "resolve_opt_virtual_call");
3184 _resolve_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_virtual_call_C),
3185 "resolve_virtual_call");
3187 _resolve_static_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_static_call_C),
3188 "resolve_static_call");
3189 _polling_page_safepoint_handler_blob =
3190 generate_handler_blob(CAST_FROM_FN_PTR(address,
3191 SafepointSynchronize::handle_polling_page_exception), false);
3193 _polling_page_return_handler_blob =
3194 generate_handler_blob(CAST_FROM_FN_PTR(address,
3195 SafepointSynchronize::handle_polling_page_exception), true);
3197 generate_deopt_blob();
3199 #ifdef COMPILER2
3200 generate_uncommon_trap_blob();
3201 #endif // COMPILER2
3202 }
3205 #ifdef COMPILER2
3206 // This is here instead of runtime_x86_64.cpp because it uses SimpleRuntimeFrame
3207 //
3208 //------------------------------generate_exception_blob---------------------------
3209 // creates exception blob at the end
3210 // Using exception blob, this code is jumped from a compiled method.
3211 // (see emit_exception_handler in x86_64.ad file)
3212 //
3213 // Given an exception pc at a call we call into the runtime for the
3214 // handler in this method. This handler might merely restore state
3215 // (i.e. callee save registers) unwind the frame and jump to the
3216 // exception handler for the nmethod if there is no Java level handler
3217 // for the nmethod.
3218 //
3219 // This code is entered with a jmp.
3220 //
3221 // Arguments:
3222 // rax: exception oop
3223 // rdx: exception pc
3224 //
3225 // Results:
3226 // rax: exception oop
3227 // rdx: exception pc in caller or ???
3228 // destination: exception handler of caller
3229 //
3230 // Note: the exception pc MUST be at a call (precise debug information)
3231 // Registers rax, rdx, rcx, rsi, rdi, r8-r11 are not callee saved.
3232 //
3234 void OptoRuntime::generate_exception_blob() {
3235 assert(!OptoRuntime::is_callee_saved_register(RDX_num), "");
3236 assert(!OptoRuntime::is_callee_saved_register(RAX_num), "");
3237 assert(!OptoRuntime::is_callee_saved_register(RCX_num), "");
3239 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
3241 // Allocate space for the code
3242 ResourceMark rm;
3243 // Setup code generation tools
3244 CodeBuffer buffer("exception_blob", 2048, 1024);
3245 MacroAssembler* masm = new MacroAssembler(&buffer);
3248 address start = __ pc();
3250 // Exception pc is 'return address' for stack walker
3251 __ push(rdx);
3252 __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Prolog
3254 // Save callee-saved registers. See x86_64.ad.
3256 // rbp is an implicitly saved callee saved register (i.e. the calling
3257 // convention will save restore it in prolog/epilog) Other than that
3258 // there are no callee save registers now that adapter frames are gone.
3260 __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
3262 // Store exception in Thread object. We cannot pass any arguments to the
3263 // handle_exception call, since we do not want to make any assumption
3264 // about the size of the frame where the exception happened in.
3265 // c_rarg0 is either rdi (Linux) or rcx (Windows).
3266 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()),rax);
3267 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
3269 // This call does all the hard work. It checks if an exception handler
3270 // exists in the method.
3271 // If so, it returns the handler address.
3272 // If not, it prepares for stack-unwinding, restoring the callee-save
3273 // registers of the frame being removed.
3274 //
3275 // address OptoRuntime::handle_exception_C(JavaThread* thread)
3277 __ set_last_Java_frame(noreg, noreg, NULL);
3278 __ mov(c_rarg0, r15_thread);
3279 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, OptoRuntime::handle_exception_C)));
3281 // Set an oopmap for the call site. This oopmap will only be used if we
3282 // are unwinding the stack. Hence, all locations will be dead.
3283 // Callee-saved registers will be the same as the frame above (i.e.,
3284 // handle_exception_stub), since they were restored when we got the
3285 // exception.
3287 OopMapSet* oop_maps = new OopMapSet();
3289 oop_maps->add_gc_map( __ pc()-start, new OopMap(SimpleRuntimeFrame::framesize, 0));
3291 __ reset_last_Java_frame(false, false);
3293 // Restore callee-saved registers
3295 // rbp is an implicitly saved callee saved register (i.e. the calling
3296 // convention will save restore it in prolog/epilog) Other than that
3297 // there are no callee save registers no that adapter frames are gone.
3299 __ movptr(rbp, Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt));
3301 __ addptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog
3302 __ pop(rdx); // No need for exception pc anymore
3304 // rax: exception handler
3306 // Restore SP from BP if the exception PC is a MethodHandle call site.
3307 __ cmpl(Address(r15_thread, JavaThread::is_method_handle_return_offset()), 0);
3308 __ cmovptr(Assembler::notEqual, rsp, rbp_mh_SP_save);
3310 // We have a handler in rax (could be deopt blob).
3311 __ mov(r8, rax);
3313 // Get the exception oop
3314 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
3315 // Get the exception pc in case we are deoptimized
3316 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
3317 #ifdef ASSERT
3318 __ movptr(Address(r15_thread, JavaThread::exception_handler_pc_offset()), (int)NULL_WORD);
3319 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int)NULL_WORD);
3320 #endif
3321 // Clear the exception oop so GC no longer processes it as a root.
3322 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int)NULL_WORD);
3324 // rax: exception oop
3325 // r8: exception handler
3326 // rdx: exception pc
3327 // Jump to handler
3329 __ jmp(r8);
3331 // Make sure all code is generated
3332 masm->flush();
3334 // Set exception blob
3335 _exception_blob = ExceptionBlob::create(&buffer, oop_maps, SimpleRuntimeFrame::framesize >> 1);
3336 }
3337 #endif // COMPILER2