Wed, 27 Jul 2011 17:28:36 -0700
7069452: Cleanup NodeFlags
Summary: Remove flags which duplicate information in Node::NodeClasses.
Reviewed-by: never
1 //
2 // Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 //
5 // This code is free software; you can redistribute it and/or modify it
6 // under the terms of the GNU General Public License version 2 only, as
7 // published by the Free Software Foundation.
8 //
9 // This code is distributed in the hope that it will be useful, but WITHOUT
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 // version 2 for more details (a copy is included in the LICENSE file that
13 // accompanied this code).
14 //
15 // You should have received a copy of the GNU General Public License version
16 // 2 along with this work; if not, write to the Free Software Foundation,
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 //
19 // Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 // or visit www.oracle.com if you need additional information or have any
21 // questions.
22 //
23 //
25 // X86 Architecture Description File
27 //----------REGISTER DEFINITION BLOCK------------------------------------------
28 // This information is used by the matcher and the register allocator to
29 // describe individual registers and classes of registers within the target
30 // archtecture.
32 register %{
33 //----------Architecture Description Register Definitions----------------------
34 // General Registers
35 // "reg_def" name ( register save type, C convention save type,
36 // ideal register type, encoding );
37 // Register Save Types:
38 //
39 // NS = No-Save: The register allocator assumes that these registers
40 // can be used without saving upon entry to the method, &
41 // that they do not need to be saved at call sites.
42 //
43 // SOC = Save-On-Call: The register allocator assumes that these registers
44 // can be used without saving upon entry to the method,
45 // but that they must be saved at call sites.
46 //
47 // SOE = Save-On-Entry: The register allocator assumes that these registers
48 // must be saved before using them upon entry to the
49 // method, but they do not need to be saved at call
50 // sites.
51 //
52 // AS = Always-Save: The register allocator assumes that these registers
53 // must be saved before using them upon entry to the
54 // method, & that they must be saved at call sites.
55 //
56 // Ideal Register Type is used to determine how to save & restore a
57 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get
58 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI.
59 //
60 // The encoding number is the actual bit-pattern placed into the opcodes.
62 // General Registers
63 // Previously set EBX, ESI, and EDI as save-on-entry for java code
64 // Turn off SOE in java-code due to frequent use of uncommon-traps.
65 // Now that allocator is better, turn on ESI and EDI as SOE registers.
67 reg_def EBX(SOC, SOE, Op_RegI, 3, rbx->as_VMReg());
68 reg_def ECX(SOC, SOC, Op_RegI, 1, rcx->as_VMReg());
69 reg_def ESI(SOC, SOE, Op_RegI, 6, rsi->as_VMReg());
70 reg_def EDI(SOC, SOE, Op_RegI, 7, rdi->as_VMReg());
71 // now that adapter frames are gone EBP is always saved and restored by the prolog/epilog code
72 reg_def EBP(NS, SOE, Op_RegI, 5, rbp->as_VMReg());
73 reg_def EDX(SOC, SOC, Op_RegI, 2, rdx->as_VMReg());
74 reg_def EAX(SOC, SOC, Op_RegI, 0, rax->as_VMReg());
75 reg_def ESP( NS, NS, Op_RegI, 4, rsp->as_VMReg());
77 // Special Registers
78 reg_def EFLAGS(SOC, SOC, 0, 8, VMRegImpl::Bad());
80 // Float registers. We treat TOS/FPR0 special. It is invisible to the
81 // allocator, and only shows up in the encodings.
82 reg_def FPR0L( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
83 reg_def FPR0H( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
84 // Ok so here's the trick FPR1 is really st(0) except in the midst
85 // of emission of assembly for a machnode. During the emission the fpu stack
86 // is pushed making FPR1 == st(1) temporarily. However at any safepoint
87 // the stack will not have this element so FPR1 == st(0) from the
88 // oopMap viewpoint. This same weirdness with numbering causes
89 // instruction encoding to have to play games with the register
90 // encode to correct for this 0/1 issue. See MachSpillCopyNode::implementation
91 // where it does flt->flt moves to see an example
92 //
93 reg_def FPR1L( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg());
94 reg_def FPR1H( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg()->next());
95 reg_def FPR2L( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg());
96 reg_def FPR2H( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg()->next());
97 reg_def FPR3L( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg());
98 reg_def FPR3H( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg()->next());
99 reg_def FPR4L( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg());
100 reg_def FPR4H( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg()->next());
101 reg_def FPR5L( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg());
102 reg_def FPR5H( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg()->next());
103 reg_def FPR6L( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg());
104 reg_def FPR6H( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg()->next());
105 reg_def FPR7L( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg());
106 reg_def FPR7H( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg()->next());
108 // XMM registers. 128-bit registers or 4 words each, labeled a-d.
109 // Word a in each register holds a Float, words ab hold a Double.
110 // We currently do not use the SIMD capabilities, so registers cd
111 // are unused at the moment.
112 reg_def XMM0a( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg());
113 reg_def XMM0b( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg()->next());
114 reg_def XMM1a( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg());
115 reg_def XMM1b( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg()->next());
116 reg_def XMM2a( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg());
117 reg_def XMM2b( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg()->next());
118 reg_def XMM3a( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg());
119 reg_def XMM3b( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg()->next());
120 reg_def XMM4a( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg());
121 reg_def XMM4b( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg()->next());
122 reg_def XMM5a( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg());
123 reg_def XMM5b( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg()->next());
124 reg_def XMM6a( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg());
125 reg_def XMM6b( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg()->next());
126 reg_def XMM7a( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg());
127 reg_def XMM7b( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg()->next());
129 // Specify priority of register selection within phases of register
130 // allocation. Highest priority is first. A useful heuristic is to
131 // give registers a low priority when they are required by machine
132 // instructions, like EAX and EDX. Registers which are used as
133 // pairs must fall on an even boundary (witness the FPR#L's in this list).
134 // For the Intel integer registers, the equivalent Long pairs are
135 // EDX:EAX, EBX:ECX, and EDI:EBP.
136 alloc_class chunk0( ECX, EBX, EBP, EDI, EAX, EDX, ESI, ESP,
137 FPR0L, FPR0H, FPR1L, FPR1H, FPR2L, FPR2H,
138 FPR3L, FPR3H, FPR4L, FPR4H, FPR5L, FPR5H,
139 FPR6L, FPR6H, FPR7L, FPR7H );
141 alloc_class chunk1( XMM0a, XMM0b,
142 XMM1a, XMM1b,
143 XMM2a, XMM2b,
144 XMM3a, XMM3b,
145 XMM4a, XMM4b,
146 XMM5a, XMM5b,
147 XMM6a, XMM6b,
148 XMM7a, XMM7b, EFLAGS);
151 //----------Architecture Description Register Classes--------------------------
152 // Several register classes are automatically defined based upon information in
153 // this architecture description.
154 // 1) reg_class inline_cache_reg ( /* as def'd in frame section */ )
155 // 2) reg_class compiler_method_oop_reg ( /* as def'd in frame section */ )
156 // 2) reg_class interpreter_method_oop_reg ( /* as def'd in frame section */ )
157 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ )
158 //
159 // Class for all registers
160 reg_class any_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX, ESP);
161 // Class for general registers
162 reg_class e_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX);
163 // Class for general registers which may be used for implicit null checks on win95
164 // Also safe for use by tailjump. We don't want to allocate in rbp,
165 reg_class e_reg_no_rbp(EAX, EDX, EDI, ESI, ECX, EBX);
166 // Class of "X" registers
167 reg_class x_reg(EBX, ECX, EDX, EAX);
168 // Class of registers that can appear in an address with no offset.
169 // EBP and ESP require an extra instruction byte for zero offset.
170 // Used in fast-unlock
171 reg_class p_reg(EDX, EDI, ESI, EBX);
172 // Class for general registers not including ECX
173 reg_class ncx_reg(EAX, EDX, EBP, EDI, ESI, EBX);
174 // Class for general registers not including EAX
175 reg_class nax_reg(EDX, EDI, ESI, ECX, EBX);
176 // Class for general registers not including EAX or EBX.
177 reg_class nabx_reg(EDX, EDI, ESI, ECX, EBP);
178 // Class of EAX (for multiply and divide operations)
179 reg_class eax_reg(EAX);
180 // Class of EBX (for atomic add)
181 reg_class ebx_reg(EBX);
182 // Class of ECX (for shift and JCXZ operations and cmpLTMask)
183 reg_class ecx_reg(ECX);
184 // Class of EDX (for multiply and divide operations)
185 reg_class edx_reg(EDX);
186 // Class of EDI (for synchronization)
187 reg_class edi_reg(EDI);
188 // Class of ESI (for synchronization)
189 reg_class esi_reg(ESI);
190 // Singleton class for interpreter's stack pointer
191 reg_class ebp_reg(EBP);
192 // Singleton class for stack pointer
193 reg_class sp_reg(ESP);
194 // Singleton class for instruction pointer
195 // reg_class ip_reg(EIP);
196 // Singleton class for condition codes
197 reg_class int_flags(EFLAGS);
198 // Class of integer register pairs
199 reg_class long_reg( EAX,EDX, ECX,EBX, EBP,EDI );
200 // Class of integer register pairs that aligns with calling convention
201 reg_class eadx_reg( EAX,EDX );
202 reg_class ebcx_reg( ECX,EBX );
203 // Not AX or DX, used in divides
204 reg_class nadx_reg( EBX,ECX,ESI,EDI,EBP );
206 // Floating point registers. Notice FPR0 is not a choice.
207 // FPR0 is not ever allocated; we use clever encodings to fake
208 // a 2-address instructions out of Intels FP stack.
209 reg_class flt_reg( FPR1L,FPR2L,FPR3L,FPR4L,FPR5L,FPR6L,FPR7L );
211 // make a register class for SSE registers
212 reg_class xmm_reg(XMM0a, XMM1a, XMM2a, XMM3a, XMM4a, XMM5a, XMM6a, XMM7a);
214 // make a double register class for SSE2 registers
215 reg_class xdb_reg(XMM0a,XMM0b, XMM1a,XMM1b, XMM2a,XMM2b, XMM3a,XMM3b,
216 XMM4a,XMM4b, XMM5a,XMM5b, XMM6a,XMM6b, XMM7a,XMM7b );
218 reg_class dbl_reg( FPR1L,FPR1H, FPR2L,FPR2H, FPR3L,FPR3H,
219 FPR4L,FPR4H, FPR5L,FPR5H, FPR6L,FPR6H,
220 FPR7L,FPR7H );
222 reg_class flt_reg0( FPR1L );
223 reg_class dbl_reg0( FPR1L,FPR1H );
224 reg_class dbl_reg1( FPR2L,FPR2H );
225 reg_class dbl_notreg0( FPR2L,FPR2H, FPR3L,FPR3H, FPR4L,FPR4H,
226 FPR5L,FPR5H, FPR6L,FPR6H, FPR7L,FPR7H );
228 // XMM6 and XMM7 could be used as temporary registers for long, float and
229 // double values for SSE2.
230 reg_class xdb_reg6( XMM6a,XMM6b );
231 reg_class xdb_reg7( XMM7a,XMM7b );
232 %}
235 //----------SOURCE BLOCK-------------------------------------------------------
236 // This is a block of C++ code which provides values, functions, and
237 // definitions necessary in the rest of the architecture description
238 source_hpp %{
239 // Must be visible to the DFA in dfa_x86_32.cpp
240 extern bool is_operand_hi32_zero(Node* n);
241 %}
243 source %{
244 #define RELOC_IMM32 Assembler::imm_operand
245 #define RELOC_DISP32 Assembler::disp32_operand
247 #define __ _masm.
249 // How to find the high register of a Long pair, given the low register
250 #define HIGH_FROM_LOW(x) ((x)+2)
252 // These masks are used to provide 128-bit aligned bitmasks to the XMM
253 // instructions, to allow sign-masking or sign-bit flipping. They allow
254 // fast versions of NegF/NegD and AbsF/AbsD.
256 // Note: 'double' and 'long long' have 32-bits alignment on x86.
257 static jlong* double_quadword(jlong *adr, jlong lo, jlong hi) {
258 // Use the expression (adr)&(~0xF) to provide 128-bits aligned address
259 // of 128-bits operands for SSE instructions.
260 jlong *operand = (jlong*)(((uintptr_t)adr)&((uintptr_t)(~0xF)));
261 // Store the value to a 128-bits operand.
262 operand[0] = lo;
263 operand[1] = hi;
264 return operand;
265 }
267 // Buffer for 128-bits masks used by SSE instructions.
268 static jlong fp_signmask_pool[(4+1)*2]; // 4*128bits(data) + 128bits(alignment)
270 // Static initialization during VM startup.
271 static jlong *float_signmask_pool = double_quadword(&fp_signmask_pool[1*2], CONST64(0x7FFFFFFF7FFFFFFF), CONST64(0x7FFFFFFF7FFFFFFF));
272 static jlong *double_signmask_pool = double_quadword(&fp_signmask_pool[2*2], CONST64(0x7FFFFFFFFFFFFFFF), CONST64(0x7FFFFFFFFFFFFFFF));
273 static jlong *float_signflip_pool = double_quadword(&fp_signmask_pool[3*2], CONST64(0x8000000080000000), CONST64(0x8000000080000000));
274 static jlong *double_signflip_pool = double_quadword(&fp_signmask_pool[4*2], CONST64(0x8000000000000000), CONST64(0x8000000000000000));
276 // Offset hacking within calls.
277 static int pre_call_FPU_size() {
278 if (Compile::current()->in_24_bit_fp_mode())
279 return 6; // fldcw
280 return 0;
281 }
283 static int preserve_SP_size() {
284 return LP64_ONLY(1 +) 2; // [rex,] op, rm(reg/reg)
285 }
287 // !!!!! Special hack to get all type of calls to specify the byte offset
288 // from the start of the call to the point where the return address
289 // will point.
290 int MachCallStaticJavaNode::ret_addr_offset() {
291 int offset = 5 + pre_call_FPU_size(); // 5 bytes from start of call to where return address points
292 if (_method_handle_invoke)
293 offset += preserve_SP_size();
294 return offset;
295 }
297 int MachCallDynamicJavaNode::ret_addr_offset() {
298 return 10 + pre_call_FPU_size(); // 10 bytes from start of call to where return address points
299 }
301 static int sizeof_FFree_Float_Stack_All = -1;
303 int MachCallRuntimeNode::ret_addr_offset() {
304 assert(sizeof_FFree_Float_Stack_All != -1, "must have been emitted already");
305 return sizeof_FFree_Float_Stack_All + 5 + pre_call_FPU_size();
306 }
308 // Indicate if the safepoint node needs the polling page as an input.
309 // Since x86 does have absolute addressing, it doesn't.
310 bool SafePointNode::needs_polling_address_input() {
311 return false;
312 }
314 //
315 // Compute padding required for nodes which need alignment
316 //
318 // The address of the call instruction needs to be 4-byte aligned to
319 // ensure that it does not span a cache line so that it can be patched.
320 int CallStaticJavaDirectNode::compute_padding(int current_offset) const {
321 current_offset += pre_call_FPU_size(); // skip fldcw, if any
322 current_offset += 1; // skip call opcode byte
323 return round_to(current_offset, alignment_required()) - current_offset;
324 }
326 // The address of the call instruction needs to be 4-byte aligned to
327 // ensure that it does not span a cache line so that it can be patched.
328 int CallStaticJavaHandleNode::compute_padding(int current_offset) const {
329 current_offset += pre_call_FPU_size(); // skip fldcw, if any
330 current_offset += preserve_SP_size(); // skip mov rbp, rsp
331 current_offset += 1; // skip call opcode byte
332 return round_to(current_offset, alignment_required()) - current_offset;
333 }
335 // The address of the call instruction needs to be 4-byte aligned to
336 // ensure that it does not span a cache line so that it can be patched.
337 int CallDynamicJavaDirectNode::compute_padding(int current_offset) const {
338 current_offset += pre_call_FPU_size(); // skip fldcw, if any
339 current_offset += 5; // skip MOV instruction
340 current_offset += 1; // skip call opcode byte
341 return round_to(current_offset, alignment_required()) - current_offset;
342 }
344 #ifndef PRODUCT
345 void MachBreakpointNode::format( PhaseRegAlloc *, outputStream* st ) const {
346 st->print("INT3");
347 }
348 #endif
350 // EMIT_RM()
351 void emit_rm(CodeBuffer &cbuf, int f1, int f2, int f3) {
352 unsigned char c = (unsigned char)((f1 << 6) | (f2 << 3) | f3);
353 cbuf.insts()->emit_int8(c);
354 }
356 // EMIT_CC()
357 void emit_cc(CodeBuffer &cbuf, int f1, int f2) {
358 unsigned char c = (unsigned char)( f1 | f2 );
359 cbuf.insts()->emit_int8(c);
360 }
362 // EMIT_OPCODE()
363 void emit_opcode(CodeBuffer &cbuf, int code) {
364 cbuf.insts()->emit_int8((unsigned char) code);
365 }
367 // EMIT_OPCODE() w/ relocation information
368 void emit_opcode(CodeBuffer &cbuf, int code, relocInfo::relocType reloc, int offset = 0) {
369 cbuf.relocate(cbuf.insts_mark() + offset, reloc);
370 emit_opcode(cbuf, code);
371 }
373 // EMIT_D8()
374 void emit_d8(CodeBuffer &cbuf, int d8) {
375 cbuf.insts()->emit_int8((unsigned char) d8);
376 }
378 // EMIT_D16()
379 void emit_d16(CodeBuffer &cbuf, int d16) {
380 cbuf.insts()->emit_int16(d16);
381 }
383 // EMIT_D32()
384 void emit_d32(CodeBuffer &cbuf, int d32) {
385 cbuf.insts()->emit_int32(d32);
386 }
388 // emit 32 bit value and construct relocation entry from relocInfo::relocType
389 void emit_d32_reloc(CodeBuffer &cbuf, int d32, relocInfo::relocType reloc,
390 int format) {
391 cbuf.relocate(cbuf.insts_mark(), reloc, format);
392 cbuf.insts()->emit_int32(d32);
393 }
395 // emit 32 bit value and construct relocation entry from RelocationHolder
396 void emit_d32_reloc(CodeBuffer &cbuf, int d32, RelocationHolder const& rspec,
397 int format) {
398 #ifdef ASSERT
399 if (rspec.reloc()->type() == relocInfo::oop_type && d32 != 0 && d32 != (int)Universe::non_oop_word()) {
400 assert(oop(d32)->is_oop() && (ScavengeRootsInCode || !oop(d32)->is_scavengable()), "cannot embed scavengable oops in code");
401 }
402 #endif
403 cbuf.relocate(cbuf.insts_mark(), rspec, format);
404 cbuf.insts()->emit_int32(d32);
405 }
407 // Access stack slot for load or store
408 void store_to_stackslot(CodeBuffer &cbuf, int opcode, int rm_field, int disp) {
409 emit_opcode( cbuf, opcode ); // (e.g., FILD [ESP+src])
410 if( -128 <= disp && disp <= 127 ) {
411 emit_rm( cbuf, 0x01, rm_field, ESP_enc ); // R/M byte
412 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
413 emit_d8 (cbuf, disp); // Displacement // R/M byte
414 } else {
415 emit_rm( cbuf, 0x02, rm_field, ESP_enc ); // R/M byte
416 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
417 emit_d32(cbuf, disp); // Displacement // R/M byte
418 }
419 }
421 // eRegI ereg, memory mem) %{ // emit_reg_mem
422 void encode_RegMem( CodeBuffer &cbuf, int reg_encoding, int base, int index, int scale, int displace, bool displace_is_oop ) {
423 // There is no index & no scale, use form without SIB byte
424 if ((index == 0x4) &&
425 (scale == 0) && (base != ESP_enc)) {
426 // If no displacement, mode is 0x0; unless base is [EBP]
427 if ( (displace == 0) && (base != EBP_enc) ) {
428 emit_rm(cbuf, 0x0, reg_encoding, base);
429 }
430 else { // If 8-bit displacement, mode 0x1
431 if ((displace >= -128) && (displace <= 127)
432 && !(displace_is_oop) ) {
433 emit_rm(cbuf, 0x1, reg_encoding, base);
434 emit_d8(cbuf, displace);
435 }
436 else { // If 32-bit displacement
437 if (base == -1) { // Special flag for absolute address
438 emit_rm(cbuf, 0x0, reg_encoding, 0x5);
439 // (manual lies; no SIB needed here)
440 if ( displace_is_oop ) {
441 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
442 } else {
443 emit_d32 (cbuf, displace);
444 }
445 }
446 else { // Normal base + offset
447 emit_rm(cbuf, 0x2, reg_encoding, base);
448 if ( displace_is_oop ) {
449 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
450 } else {
451 emit_d32 (cbuf, displace);
452 }
453 }
454 }
455 }
456 }
457 else { // Else, encode with the SIB byte
458 // If no displacement, mode is 0x0; unless base is [EBP]
459 if (displace == 0 && (base != EBP_enc)) { // If no displacement
460 emit_rm(cbuf, 0x0, reg_encoding, 0x4);
461 emit_rm(cbuf, scale, index, base);
462 }
463 else { // If 8-bit displacement, mode 0x1
464 if ((displace >= -128) && (displace <= 127)
465 && !(displace_is_oop) ) {
466 emit_rm(cbuf, 0x1, reg_encoding, 0x4);
467 emit_rm(cbuf, scale, index, base);
468 emit_d8(cbuf, displace);
469 }
470 else { // If 32-bit displacement
471 if (base == 0x04 ) {
472 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
473 emit_rm(cbuf, scale, index, 0x04);
474 } else {
475 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
476 emit_rm(cbuf, scale, index, base);
477 }
478 if ( displace_is_oop ) {
479 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
480 } else {
481 emit_d32 (cbuf, displace);
482 }
483 }
484 }
485 }
486 }
489 void encode_Copy( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
490 if( dst_encoding == src_encoding ) {
491 // reg-reg copy, use an empty encoding
492 } else {
493 emit_opcode( cbuf, 0x8B );
494 emit_rm(cbuf, 0x3, dst_encoding, src_encoding );
495 }
496 }
498 void encode_CopyXD( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
499 if( dst_encoding == src_encoding ) {
500 // reg-reg copy, use an empty encoding
501 } else {
502 MacroAssembler _masm(&cbuf);
504 __ movdqa(as_XMMRegister(dst_encoding), as_XMMRegister(src_encoding));
505 }
506 }
509 //=============================================================================
510 const bool Matcher::constant_table_absolute_addressing = true;
511 const RegMask& MachConstantBaseNode::_out_RegMask = RegMask::Empty;
513 void MachConstantBaseNode::emit(CodeBuffer& cbuf, PhaseRegAlloc* ra_) const {
514 // Empty encoding
515 }
517 uint MachConstantBaseNode::size(PhaseRegAlloc* ra_) const {
518 return 0;
519 }
521 #ifndef PRODUCT
522 void MachConstantBaseNode::format(PhaseRegAlloc* ra_, outputStream* st) const {
523 st->print("# MachConstantBaseNode (empty encoding)");
524 }
525 #endif
528 //=============================================================================
529 #ifndef PRODUCT
530 void MachPrologNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
531 Compile* C = ra_->C;
532 if( C->in_24_bit_fp_mode() ) {
533 st->print("FLDCW 24 bit fpu control word");
534 st->print_cr(""); st->print("\t");
535 }
537 int framesize = C->frame_slots() << LogBytesPerInt;
538 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
539 // Remove two words for return addr and rbp,
540 framesize -= 2*wordSize;
542 // Calls to C2R adapters often do not accept exceptional returns.
543 // We require that their callers must bang for them. But be careful, because
544 // some VM calls (such as call site linkage) can use several kilobytes of
545 // stack. But the stack safety zone should account for that.
546 // See bugs 4446381, 4468289, 4497237.
547 if (C->need_stack_bang(framesize)) {
548 st->print_cr("# stack bang"); st->print("\t");
549 }
550 st->print_cr("PUSHL EBP"); st->print("\t");
552 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
553 st->print("PUSH 0xBADB100D\t# Majik cookie for stack depth check");
554 st->print_cr(""); st->print("\t");
555 framesize -= wordSize;
556 }
558 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
559 if (framesize) {
560 st->print("SUB ESP,%d\t# Create frame",framesize);
561 }
562 } else {
563 st->print("SUB ESP,%d\t# Create frame",framesize);
564 }
565 }
566 #endif
569 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
570 Compile* C = ra_->C;
572 if (UseSSE >= 2 && VerifyFPU) {
573 MacroAssembler masm(&cbuf);
574 masm.verify_FPU(0, "FPU stack must be clean on entry");
575 }
577 // WARNING: Initial instruction MUST be 5 bytes or longer so that
578 // NativeJump::patch_verified_entry will be able to patch out the entry
579 // code safely. The fldcw is ok at 6 bytes, the push to verify stack
580 // depth is ok at 5 bytes, the frame allocation can be either 3 or
581 // 6 bytes. So if we don't do the fldcw or the push then we must
582 // use the 6 byte frame allocation even if we have no frame. :-(
583 // If method sets FPU control word do it now
584 if( C->in_24_bit_fp_mode() ) {
585 MacroAssembler masm(&cbuf);
586 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
587 }
589 int framesize = C->frame_slots() << LogBytesPerInt;
590 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
591 // Remove two words for return addr and rbp,
592 framesize -= 2*wordSize;
594 // Calls to C2R adapters often do not accept exceptional returns.
595 // We require that their callers must bang for them. But be careful, because
596 // some VM calls (such as call site linkage) can use several kilobytes of
597 // stack. But the stack safety zone should account for that.
598 // See bugs 4446381, 4468289, 4497237.
599 if (C->need_stack_bang(framesize)) {
600 MacroAssembler masm(&cbuf);
601 masm.generate_stack_overflow_check(framesize);
602 }
604 // We always push rbp, so that on return to interpreter rbp, will be
605 // restored correctly and we can correct the stack.
606 emit_opcode(cbuf, 0x50 | EBP_enc);
608 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
609 emit_opcode(cbuf, 0x68); // push 0xbadb100d
610 emit_d32(cbuf, 0xbadb100d);
611 framesize -= wordSize;
612 }
614 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
615 if (framesize) {
616 emit_opcode(cbuf, 0x83); // sub SP,#framesize
617 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
618 emit_d8(cbuf, framesize);
619 }
620 } else {
621 emit_opcode(cbuf, 0x81); // sub SP,#framesize
622 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
623 emit_d32(cbuf, framesize);
624 }
625 C->set_frame_complete(cbuf.insts_size());
627 #ifdef ASSERT
628 if (VerifyStackAtCalls) {
629 Label L;
630 MacroAssembler masm(&cbuf);
631 masm.push(rax);
632 masm.mov(rax, rsp);
633 masm.andptr(rax, StackAlignmentInBytes-1);
634 masm.cmpptr(rax, StackAlignmentInBytes-wordSize);
635 masm.pop(rax);
636 masm.jcc(Assembler::equal, L);
637 masm.stop("Stack is not properly aligned!");
638 masm.bind(L);
639 }
640 #endif
642 }
644 uint MachPrologNode::size(PhaseRegAlloc *ra_) const {
645 return MachNode::size(ra_); // too many variables; just compute it the hard way
646 }
648 int MachPrologNode::reloc() const {
649 return 0; // a large enough number
650 }
652 //=============================================================================
653 #ifndef PRODUCT
654 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
655 Compile *C = ra_->C;
656 int framesize = C->frame_slots() << LogBytesPerInt;
657 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
658 // Remove two words for return addr and rbp,
659 framesize -= 2*wordSize;
661 if( C->in_24_bit_fp_mode() ) {
662 st->print("FLDCW standard control word");
663 st->cr(); st->print("\t");
664 }
665 if( framesize ) {
666 st->print("ADD ESP,%d\t# Destroy frame",framesize);
667 st->cr(); st->print("\t");
668 }
669 st->print_cr("POPL EBP"); st->print("\t");
670 if( do_polling() && C->is_method_compilation() ) {
671 st->print("TEST PollPage,EAX\t! Poll Safepoint");
672 st->cr(); st->print("\t");
673 }
674 }
675 #endif
677 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
678 Compile *C = ra_->C;
680 // If method set FPU control word, restore to standard control word
681 if( C->in_24_bit_fp_mode() ) {
682 MacroAssembler masm(&cbuf);
683 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
684 }
686 int framesize = C->frame_slots() << LogBytesPerInt;
687 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
688 // Remove two words for return addr and rbp,
689 framesize -= 2*wordSize;
691 // Note that VerifyStackAtCalls' Majik cookie does not change the frame size popped here
693 if( framesize >= 128 ) {
694 emit_opcode(cbuf, 0x81); // add SP, #framesize
695 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
696 emit_d32(cbuf, framesize);
697 }
698 else if( framesize ) {
699 emit_opcode(cbuf, 0x83); // add SP, #framesize
700 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
701 emit_d8(cbuf, framesize);
702 }
704 emit_opcode(cbuf, 0x58 | EBP_enc);
706 if( do_polling() && C->is_method_compilation() ) {
707 cbuf.relocate(cbuf.insts_end(), relocInfo::poll_return_type, 0);
708 emit_opcode(cbuf,0x85);
709 emit_rm(cbuf, 0x0, EAX_enc, 0x5); // EAX
710 emit_d32(cbuf, (intptr_t)os::get_polling_page());
711 }
712 }
714 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const {
715 Compile *C = ra_->C;
716 // If method set FPU control word, restore to standard control word
717 int size = C->in_24_bit_fp_mode() ? 6 : 0;
718 if( do_polling() && C->is_method_compilation() ) size += 6;
720 int framesize = C->frame_slots() << LogBytesPerInt;
721 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
722 // Remove two words for return addr and rbp,
723 framesize -= 2*wordSize;
725 size++; // popl rbp,
727 if( framesize >= 128 ) {
728 size += 6;
729 } else {
730 size += framesize ? 3 : 0;
731 }
732 return size;
733 }
735 int MachEpilogNode::reloc() const {
736 return 0; // a large enough number
737 }
739 const Pipeline * MachEpilogNode::pipeline() const {
740 return MachNode::pipeline_class();
741 }
743 int MachEpilogNode::safepoint_offset() const { return 0; }
745 //=============================================================================
747 enum RC { rc_bad, rc_int, rc_float, rc_xmm, rc_stack };
748 static enum RC rc_class( OptoReg::Name reg ) {
750 if( !OptoReg::is_valid(reg) ) return rc_bad;
751 if (OptoReg::is_stack(reg)) return rc_stack;
753 VMReg r = OptoReg::as_VMReg(reg);
754 if (r->is_Register()) return rc_int;
755 if (r->is_FloatRegister()) {
756 assert(UseSSE < 2, "shouldn't be used in SSE2+ mode");
757 return rc_float;
758 }
759 assert(r->is_XMMRegister(), "must be");
760 return rc_xmm;
761 }
763 static int impl_helper( CodeBuffer *cbuf, bool do_size, bool is_load, int offset, int reg,
764 int opcode, const char *op_str, int size, outputStream* st ) {
765 if( cbuf ) {
766 emit_opcode (*cbuf, opcode );
767 encode_RegMem(*cbuf, Matcher::_regEncode[reg], ESP_enc, 0x4, 0, offset, false);
768 #ifndef PRODUCT
769 } else if( !do_size ) {
770 if( size != 0 ) st->print("\n\t");
771 if( opcode == 0x8B || opcode == 0x89 ) { // MOV
772 if( is_load ) st->print("%s %s,[ESP + #%d]",op_str,Matcher::regName[reg],offset);
773 else st->print("%s [ESP + #%d],%s",op_str,offset,Matcher::regName[reg]);
774 } else { // FLD, FST, PUSH, POP
775 st->print("%s [ESP + #%d]",op_str,offset);
776 }
777 #endif
778 }
779 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
780 return size+3+offset_size;
781 }
783 // Helper for XMM registers. Extra opcode bits, limited syntax.
784 static int impl_x_helper( CodeBuffer *cbuf, bool do_size, bool is_load,
785 int offset, int reg_lo, int reg_hi, int size, outputStream* st ) {
786 if( cbuf ) {
787 if( reg_lo+1 == reg_hi ) { // double move?
788 if( is_load && !UseXmmLoadAndClearUpper )
789 emit_opcode(*cbuf, 0x66 ); // use 'movlpd' for load
790 else
791 emit_opcode(*cbuf, 0xF2 ); // use 'movsd' otherwise
792 } else {
793 emit_opcode(*cbuf, 0xF3 );
794 }
795 emit_opcode(*cbuf, 0x0F );
796 if( reg_lo+1 == reg_hi && is_load && !UseXmmLoadAndClearUpper )
797 emit_opcode(*cbuf, 0x12 ); // use 'movlpd' for load
798 else
799 emit_opcode(*cbuf, is_load ? 0x10 : 0x11 );
800 encode_RegMem(*cbuf, Matcher::_regEncode[reg_lo], ESP_enc, 0x4, 0, offset, false);
801 #ifndef PRODUCT
802 } else if( !do_size ) {
803 if( size != 0 ) st->print("\n\t");
804 if( reg_lo+1 == reg_hi ) { // double move?
805 if( is_load ) st->print("%s %s,[ESP + #%d]",
806 UseXmmLoadAndClearUpper ? "MOVSD " : "MOVLPD",
807 Matcher::regName[reg_lo], offset);
808 else st->print("MOVSD [ESP + #%d],%s",
809 offset, Matcher::regName[reg_lo]);
810 } else {
811 if( is_load ) st->print("MOVSS %s,[ESP + #%d]",
812 Matcher::regName[reg_lo], offset);
813 else st->print("MOVSS [ESP + #%d],%s",
814 offset, Matcher::regName[reg_lo]);
815 }
816 #endif
817 }
818 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
819 return size+5+offset_size;
820 }
823 static int impl_movx_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
824 int src_hi, int dst_hi, int size, outputStream* st ) {
825 if( UseXmmRegToRegMoveAll ) {//Use movaps,movapd to move between xmm registers
826 if( cbuf ) {
827 if( (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ) {
828 emit_opcode(*cbuf, 0x66 );
829 }
830 emit_opcode(*cbuf, 0x0F );
831 emit_opcode(*cbuf, 0x28 );
832 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
833 #ifndef PRODUCT
834 } else if( !do_size ) {
835 if( size != 0 ) st->print("\n\t");
836 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
837 st->print("MOVAPD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
838 } else {
839 st->print("MOVAPS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
840 }
841 #endif
842 }
843 return size + ((src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 4 : 3);
844 } else {
845 if( cbuf ) {
846 emit_opcode(*cbuf, (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 0xF2 : 0xF3 );
847 emit_opcode(*cbuf, 0x0F );
848 emit_opcode(*cbuf, 0x10 );
849 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
850 #ifndef PRODUCT
851 } else if( !do_size ) {
852 if( size != 0 ) st->print("\n\t");
853 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
854 st->print("MOVSD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
855 } else {
856 st->print("MOVSS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
857 }
858 #endif
859 }
860 return size+4;
861 }
862 }
864 static int impl_movgpr2x_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
865 int src_hi, int dst_hi, int size, outputStream* st ) {
866 // 32-bit
867 if (cbuf) {
868 emit_opcode(*cbuf, 0x66);
869 emit_opcode(*cbuf, 0x0F);
870 emit_opcode(*cbuf, 0x6E);
871 emit_rm(*cbuf, 0x3, Matcher::_regEncode[dst_lo] & 7, Matcher::_regEncode[src_lo] & 7);
872 #ifndef PRODUCT
873 } else if (!do_size) {
874 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
875 #endif
876 }
877 return 4;
878 }
881 static int impl_movx2gpr_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
882 int src_hi, int dst_hi, int size, outputStream* st ) {
883 // 32-bit
884 if (cbuf) {
885 emit_opcode(*cbuf, 0x66);
886 emit_opcode(*cbuf, 0x0F);
887 emit_opcode(*cbuf, 0x7E);
888 emit_rm(*cbuf, 0x3, Matcher::_regEncode[src_lo] & 7, Matcher::_regEncode[dst_lo] & 7);
889 #ifndef PRODUCT
890 } else if (!do_size) {
891 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
892 #endif
893 }
894 return 4;
895 }
897 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int size, outputStream* st ) {
898 if( cbuf ) {
899 emit_opcode(*cbuf, 0x8B );
900 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst], Matcher::_regEncode[src] );
901 #ifndef PRODUCT
902 } else if( !do_size ) {
903 if( size != 0 ) st->print("\n\t");
904 st->print("MOV %s,%s",Matcher::regName[dst],Matcher::regName[src]);
905 #endif
906 }
907 return size+2;
908 }
910 static int impl_fp_store_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int src_hi, int dst_lo, int dst_hi,
911 int offset, int size, outputStream* st ) {
912 if( src_lo != FPR1L_num ) { // Move value to top of FP stack, if not already there
913 if( cbuf ) {
914 emit_opcode( *cbuf, 0xD9 ); // FLD (i.e., push it)
915 emit_d8( *cbuf, 0xC0-1+Matcher::_regEncode[src_lo] );
916 #ifndef PRODUCT
917 } else if( !do_size ) {
918 if( size != 0 ) st->print("\n\t");
919 st->print("FLD %s",Matcher::regName[src_lo]);
920 #endif
921 }
922 size += 2;
923 }
925 int st_op = (src_lo != FPR1L_num) ? EBX_num /*store & pop*/ : EDX_num /*store no pop*/;
926 const char *op_str;
927 int op;
928 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double store?
929 op_str = (src_lo != FPR1L_num) ? "FSTP_D" : "FST_D ";
930 op = 0xDD;
931 } else { // 32-bit store
932 op_str = (src_lo != FPR1L_num) ? "FSTP_S" : "FST_S ";
933 op = 0xD9;
934 assert( !OptoReg::is_valid(src_hi) && !OptoReg::is_valid(dst_hi), "no non-adjacent float-stores" );
935 }
937 return impl_helper(cbuf,do_size,false,offset,st_op,op,op_str,size, st);
938 }
940 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, outputStream* st ) const {
941 // Get registers to move
942 OptoReg::Name src_second = ra_->get_reg_second(in(1));
943 OptoReg::Name src_first = ra_->get_reg_first(in(1));
944 OptoReg::Name dst_second = ra_->get_reg_second(this );
945 OptoReg::Name dst_first = ra_->get_reg_first(this );
947 enum RC src_second_rc = rc_class(src_second);
948 enum RC src_first_rc = rc_class(src_first);
949 enum RC dst_second_rc = rc_class(dst_second);
950 enum RC dst_first_rc = rc_class(dst_first);
952 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" );
954 // Generate spill code!
955 int size = 0;
957 if( src_first == dst_first && src_second == dst_second )
958 return size; // Self copy, no move
960 // --------------------------------------
961 // Check for mem-mem move. push/pop to move.
962 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
963 if( src_second == dst_first ) { // overlapping stack copy ranges
964 assert( src_second_rc == rc_stack && dst_second_rc == rc_stack, "we only expect a stk-stk copy here" );
965 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
966 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
967 src_second_rc = dst_second_rc = rc_bad; // flag as already moved the second bits
968 }
969 // move low bits
970 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),ESI_num,0xFF,"PUSH ",size, st);
971 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),EAX_num,0x8F,"POP ",size, st);
972 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { // mov second bits
973 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
974 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
975 }
976 return size;
977 }
979 // --------------------------------------
980 // Check for integer reg-reg copy
981 if( src_first_rc == rc_int && dst_first_rc == rc_int )
982 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,size, st);
984 // Check for integer store
985 if( src_first_rc == rc_int && dst_first_rc == rc_stack )
986 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first,0x89,"MOV ",size, st);
988 // Check for integer load
989 if( dst_first_rc == rc_int && src_first_rc == rc_stack )
990 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first,0x8B,"MOV ",size, st);
992 // Check for integer reg-xmm reg copy
993 if( src_first_rc == rc_int && dst_first_rc == rc_xmm ) {
994 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
995 "no 64 bit integer-float reg moves" );
996 return impl_movgpr2x_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
997 }
998 // --------------------------------------
999 // Check for float reg-reg copy
1000 if( src_first_rc == rc_float && dst_first_rc == rc_float ) {
1001 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1002 (src_first+1 == src_second && dst_first+1 == dst_second), "no non-adjacent float-moves" );
1003 if( cbuf ) {
1005 // Note the mucking with the register encode to compensate for the 0/1
1006 // indexing issue mentioned in a comment in the reg_def sections
1007 // for FPR registers many lines above here.
1009 if( src_first != FPR1L_num ) {
1010 emit_opcode (*cbuf, 0xD9 ); // FLD ST(i)
1011 emit_d8 (*cbuf, 0xC0+Matcher::_regEncode[src_first]-1 );
1012 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1013 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1014 } else {
1015 emit_opcode (*cbuf, 0xDD ); // FST ST(i)
1016 emit_d8 (*cbuf, 0xD0+Matcher::_regEncode[dst_first]-1 );
1017 }
1018 #ifndef PRODUCT
1019 } else if( !do_size ) {
1020 if( size != 0 ) st->print("\n\t");
1021 if( src_first != FPR1L_num ) st->print("FLD %s\n\tFSTP %s",Matcher::regName[src_first],Matcher::regName[dst_first]);
1022 else st->print( "FST %s", Matcher::regName[dst_first]);
1023 #endif
1024 }
1025 return size + ((src_first != FPR1L_num) ? 2+2 : 2);
1026 }
1028 // Check for float store
1029 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) {
1030 return impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,ra_->reg2offset(dst_first),size, st);
1031 }
1033 // Check for float load
1034 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) {
1035 int offset = ra_->reg2offset(src_first);
1036 const char *op_str;
1037 int op;
1038 if( src_first+1 == src_second && dst_first+1 == dst_second ) { // double load?
1039 op_str = "FLD_D";
1040 op = 0xDD;
1041 } else { // 32-bit load
1042 op_str = "FLD_S";
1043 op = 0xD9;
1044 assert( src_second_rc == rc_bad && dst_second_rc == rc_bad, "no non-adjacent float-loads" );
1045 }
1046 if( cbuf ) {
1047 emit_opcode (*cbuf, op );
1048 encode_RegMem(*cbuf, 0x0, ESP_enc, 0x4, 0, offset, false);
1049 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1050 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1051 #ifndef PRODUCT
1052 } else if( !do_size ) {
1053 if( size != 0 ) st->print("\n\t");
1054 st->print("%s ST,[ESP + #%d]\n\tFSTP %s",op_str, offset,Matcher::regName[dst_first]);
1055 #endif
1056 }
1057 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
1058 return size + 3+offset_size+2;
1059 }
1061 // Check for xmm reg-reg copy
1062 if( src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1063 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1064 (src_first+1 == src_second && dst_first+1 == dst_second),
1065 "no non-adjacent float-moves" );
1066 return impl_movx_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1067 }
1069 // Check for xmm reg-integer reg copy
1070 if( src_first_rc == rc_xmm && dst_first_rc == rc_int ) {
1071 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1072 "no 64 bit float-integer reg moves" );
1073 return impl_movx2gpr_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1074 }
1076 // Check for xmm store
1077 if( src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1078 return impl_x_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first, src_second, size, st);
1079 }
1081 // Check for float xmm load
1082 if( dst_first_rc == rc_xmm && src_first_rc == rc_stack ) {
1083 return impl_x_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first, dst_second, size, st);
1084 }
1086 // Copy from float reg to xmm reg
1087 if( dst_first_rc == rc_xmm && src_first_rc == rc_float ) {
1088 // copy to the top of stack from floating point reg
1089 // and use LEA to preserve flags
1090 if( cbuf ) {
1091 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP-8]
1092 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1093 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1094 emit_d8(*cbuf,0xF8);
1095 #ifndef PRODUCT
1096 } else if( !do_size ) {
1097 if( size != 0 ) st->print("\n\t");
1098 st->print("LEA ESP,[ESP-8]");
1099 #endif
1100 }
1101 size += 4;
1103 size = impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,0,size, st);
1105 // Copy from the temp memory to the xmm reg.
1106 size = impl_x_helper(cbuf,do_size,true ,0,dst_first, dst_second, size, st);
1108 if( cbuf ) {
1109 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP+8]
1110 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1111 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1112 emit_d8(*cbuf,0x08);
1113 #ifndef PRODUCT
1114 } else if( !do_size ) {
1115 if( size != 0 ) st->print("\n\t");
1116 st->print("LEA ESP,[ESP+8]");
1117 #endif
1118 }
1119 size += 4;
1120 return size;
1121 }
1123 assert( size > 0, "missed a case" );
1125 // --------------------------------------------------------------------
1126 // Check for second bits still needing moving.
1127 if( src_second == dst_second )
1128 return size; // Self copy; no move
1129 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" );
1131 // Check for second word int-int move
1132 if( src_second_rc == rc_int && dst_second_rc == rc_int )
1133 return impl_mov_helper(cbuf,do_size,src_second,dst_second,size, st);
1135 // Check for second word integer store
1136 if( src_second_rc == rc_int && dst_second_rc == rc_stack )
1137 return impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),src_second,0x89,"MOV ",size, st);
1139 // Check for second word integer load
1140 if( dst_second_rc == rc_int && src_second_rc == rc_stack )
1141 return impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),dst_second,0x8B,"MOV ",size, st);
1144 Unimplemented();
1145 }
1147 #ifndef PRODUCT
1148 void MachSpillCopyNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1149 implementation( NULL, ra_, false, st );
1150 }
1151 #endif
1153 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1154 implementation( &cbuf, ra_, false, NULL );
1155 }
1157 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const {
1158 return implementation( NULL, ra_, true, NULL );
1159 }
1161 //=============================================================================
1162 #ifndef PRODUCT
1163 void MachNopNode::format( PhaseRegAlloc *, outputStream* st ) const {
1164 st->print("NOP \t# %d bytes pad for loops and calls", _count);
1165 }
1166 #endif
1168 void MachNopNode::emit(CodeBuffer &cbuf, PhaseRegAlloc * ) const {
1169 MacroAssembler _masm(&cbuf);
1170 __ nop(_count);
1171 }
1173 uint MachNopNode::size(PhaseRegAlloc *) const {
1174 return _count;
1175 }
1178 //=============================================================================
1179 #ifndef PRODUCT
1180 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1181 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1182 int reg = ra_->get_reg_first(this);
1183 st->print("LEA %s,[ESP + #%d]",Matcher::regName[reg],offset);
1184 }
1185 #endif
1187 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1188 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1189 int reg = ra_->get_encode(this);
1190 if( offset >= 128 ) {
1191 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1192 emit_rm(cbuf, 0x2, reg, 0x04);
1193 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1194 emit_d32(cbuf, offset);
1195 }
1196 else {
1197 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1198 emit_rm(cbuf, 0x1, reg, 0x04);
1199 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1200 emit_d8(cbuf, offset);
1201 }
1202 }
1204 uint BoxLockNode::size(PhaseRegAlloc *ra_) const {
1205 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1206 if( offset >= 128 ) {
1207 return 7;
1208 }
1209 else {
1210 return 4;
1211 }
1212 }
1214 //=============================================================================
1216 // emit call stub, compiled java to interpreter
1217 void emit_java_to_interp(CodeBuffer &cbuf ) {
1218 // Stub is fixed up when the corresponding call is converted from calling
1219 // compiled code to calling interpreted code.
1220 // mov rbx,0
1221 // jmp -1
1223 address mark = cbuf.insts_mark(); // get mark within main instrs section
1225 // Note that the code buffer's insts_mark is always relative to insts.
1226 // That's why we must use the macroassembler to generate a stub.
1227 MacroAssembler _masm(&cbuf);
1229 address base =
1230 __ start_a_stub(Compile::MAX_stubs_size);
1231 if (base == NULL) return; // CodeBuffer::expand failed
1232 // static stub relocation stores the instruction address of the call
1233 __ relocate(static_stub_Relocation::spec(mark), RELOC_IMM32);
1234 // static stub relocation also tags the methodOop in the code-stream.
1235 __ movoop(rbx, (jobject)NULL); // method is zapped till fixup time
1236 // This is recognized as unresolved by relocs/nativeInst/ic code
1237 __ jump(RuntimeAddress(__ pc()));
1239 __ end_a_stub();
1240 // Update current stubs pointer and restore insts_end.
1241 }
1242 // size of call stub, compiled java to interpretor
1243 uint size_java_to_interp() {
1244 return 10; // movl; jmp
1245 }
1246 // relocation entries for call stub, compiled java to interpretor
1247 uint reloc_java_to_interp() {
1248 return 4; // 3 in emit_java_to_interp + 1 in Java_Static_Call
1249 }
1251 //=============================================================================
1252 #ifndef PRODUCT
1253 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1254 st->print_cr( "CMP EAX,[ECX+4]\t# Inline cache check");
1255 st->print_cr("\tJNE SharedRuntime::handle_ic_miss_stub");
1256 st->print_cr("\tNOP");
1257 st->print_cr("\tNOP");
1258 if( !OptoBreakpoint )
1259 st->print_cr("\tNOP");
1260 }
1261 #endif
1263 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1264 MacroAssembler masm(&cbuf);
1265 #ifdef ASSERT
1266 uint insts_size = cbuf.insts_size();
1267 #endif
1268 masm.cmpptr(rax, Address(rcx, oopDesc::klass_offset_in_bytes()));
1269 masm.jump_cc(Assembler::notEqual,
1270 RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1271 /* WARNING these NOPs are critical so that verified entry point is properly
1272 aligned for patching by NativeJump::patch_verified_entry() */
1273 int nops_cnt = 2;
1274 if( !OptoBreakpoint ) // Leave space for int3
1275 nops_cnt += 1;
1276 masm.nop(nops_cnt);
1278 assert(cbuf.insts_size() - insts_size == size(ra_), "checking code size of inline cache node");
1279 }
1281 uint MachUEPNode::size(PhaseRegAlloc *ra_) const {
1282 return OptoBreakpoint ? 11 : 12;
1283 }
1286 //=============================================================================
1287 uint size_exception_handler() {
1288 // NativeCall instruction size is the same as NativeJump.
1289 // exception handler starts out as jump and can be patched to
1290 // a call be deoptimization. (4932387)
1291 // Note that this value is also credited (in output.cpp) to
1292 // the size of the code section.
1293 return NativeJump::instruction_size;
1294 }
1296 // Emit exception handler code. Stuff framesize into a register
1297 // and call a VM stub routine.
1298 int emit_exception_handler(CodeBuffer& cbuf) {
1300 // Note that the code buffer's insts_mark is always relative to insts.
1301 // That's why we must use the macroassembler to generate a handler.
1302 MacroAssembler _masm(&cbuf);
1303 address base =
1304 __ start_a_stub(size_exception_handler());
1305 if (base == NULL) return 0; // CodeBuffer::expand failed
1306 int offset = __ offset();
1307 __ jump(RuntimeAddress(OptoRuntime::exception_blob()->entry_point()));
1308 assert(__ offset() - offset <= (int) size_exception_handler(), "overflow");
1309 __ end_a_stub();
1310 return offset;
1311 }
1313 uint size_deopt_handler() {
1314 // NativeCall instruction size is the same as NativeJump.
1315 // exception handler starts out as jump and can be patched to
1316 // a call be deoptimization. (4932387)
1317 // Note that this value is also credited (in output.cpp) to
1318 // the size of the code section.
1319 return 5 + NativeJump::instruction_size; // pushl(); jmp;
1320 }
1322 // Emit deopt handler code.
1323 int emit_deopt_handler(CodeBuffer& cbuf) {
1325 // Note that the code buffer's insts_mark is always relative to insts.
1326 // That's why we must use the macroassembler to generate a handler.
1327 MacroAssembler _masm(&cbuf);
1328 address base =
1329 __ start_a_stub(size_exception_handler());
1330 if (base == NULL) return 0; // CodeBuffer::expand failed
1331 int offset = __ offset();
1332 InternalAddress here(__ pc());
1333 __ pushptr(here.addr());
1335 __ jump(RuntimeAddress(SharedRuntime::deopt_blob()->unpack()));
1336 assert(__ offset() - offset <= (int) size_deopt_handler(), "overflow");
1337 __ end_a_stub();
1338 return offset;
1339 }
1342 const bool Matcher::match_rule_supported(int opcode) {
1343 if (!has_match_rule(opcode))
1344 return false;
1346 return true; // Per default match rules are supported.
1347 }
1349 int Matcher::regnum_to_fpu_offset(int regnum) {
1350 return regnum - 32; // The FP registers are in the second chunk
1351 }
1353 // This is UltraSparc specific, true just means we have fast l2f conversion
1354 const bool Matcher::convL2FSupported(void) {
1355 return true;
1356 }
1358 // Vector width in bytes
1359 const uint Matcher::vector_width_in_bytes(void) {
1360 return UseSSE >= 2 ? 8 : 0;
1361 }
1363 // Vector ideal reg
1364 const uint Matcher::vector_ideal_reg(void) {
1365 return Op_RegD;
1366 }
1368 // Is this branch offset short enough that a short branch can be used?
1369 //
1370 // NOTE: If the platform does not provide any short branch variants, then
1371 // this method should return false for offset 0.
1372 bool Matcher::is_short_branch_offset(int rule, int offset) {
1373 // the short version of jmpConUCF2 contains multiple branches,
1374 // making the reach slightly less
1375 if (rule == jmpConUCF2_rule)
1376 return (-126 <= offset && offset <= 125);
1377 return (-128 <= offset && offset <= 127);
1378 }
1380 const bool Matcher::isSimpleConstant64(jlong value) {
1381 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?.
1382 return false;
1383 }
1385 // The ecx parameter to rep stos for the ClearArray node is in dwords.
1386 const bool Matcher::init_array_count_is_in_bytes = false;
1388 // Threshold size for cleararray.
1389 const int Matcher::init_array_short_size = 8 * BytesPerLong;
1391 // Should the Matcher clone shifts on addressing modes, expecting them to
1392 // be subsumed into complex addressing expressions or compute them into
1393 // registers? True for Intel but false for most RISCs
1394 const bool Matcher::clone_shift_expressions = true;
1396 // Do we need to mask the count passed to shift instructions or does
1397 // the cpu only look at the lower 5/6 bits anyway?
1398 const bool Matcher::need_masked_shift_count = false;
1400 bool Matcher::narrow_oop_use_complex_address() {
1401 ShouldNotCallThis();
1402 return true;
1403 }
1406 // Is it better to copy float constants, or load them directly from memory?
1407 // Intel can load a float constant from a direct address, requiring no
1408 // extra registers. Most RISCs will have to materialize an address into a
1409 // register first, so they would do better to copy the constant from stack.
1410 const bool Matcher::rematerialize_float_constants = true;
1412 // If CPU can load and store mis-aligned doubles directly then no fixup is
1413 // needed. Else we split the double into 2 integer pieces and move it
1414 // piece-by-piece. Only happens when passing doubles into C code as the
1415 // Java calling convention forces doubles to be aligned.
1416 const bool Matcher::misaligned_doubles_ok = true;
1419 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) {
1420 // Get the memory operand from the node
1421 uint numopnds = node->num_opnds(); // Virtual call for number of operands
1422 uint skipped = node->oper_input_base(); // Sum of leaves skipped so far
1423 assert( idx >= skipped, "idx too low in pd_implicit_null_fixup" );
1424 uint opcnt = 1; // First operand
1425 uint num_edges = node->_opnds[1]->num_edges(); // leaves for first operand
1426 while( idx >= skipped+num_edges ) {
1427 skipped += num_edges;
1428 opcnt++; // Bump operand count
1429 assert( opcnt < numopnds, "Accessing non-existent operand" );
1430 num_edges = node->_opnds[opcnt]->num_edges(); // leaves for next operand
1431 }
1433 MachOper *memory = node->_opnds[opcnt];
1434 MachOper *new_memory = NULL;
1435 switch (memory->opcode()) {
1436 case DIRECT:
1437 case INDOFFSET32X:
1438 // No transformation necessary.
1439 return;
1440 case INDIRECT:
1441 new_memory = new (C) indirect_win95_safeOper( );
1442 break;
1443 case INDOFFSET8:
1444 new_memory = new (C) indOffset8_win95_safeOper(memory->disp(NULL, NULL, 0));
1445 break;
1446 case INDOFFSET32:
1447 new_memory = new (C) indOffset32_win95_safeOper(memory->disp(NULL, NULL, 0));
1448 break;
1449 case INDINDEXOFFSET:
1450 new_memory = new (C) indIndexOffset_win95_safeOper(memory->disp(NULL, NULL, 0));
1451 break;
1452 case INDINDEXSCALE:
1453 new_memory = new (C) indIndexScale_win95_safeOper(memory->scale());
1454 break;
1455 case INDINDEXSCALEOFFSET:
1456 new_memory = new (C) indIndexScaleOffset_win95_safeOper(memory->scale(), memory->disp(NULL, NULL, 0));
1457 break;
1458 case LOAD_LONG_INDIRECT:
1459 case LOAD_LONG_INDOFFSET32:
1460 // Does not use EBP as address register, use { EDX, EBX, EDI, ESI}
1461 return;
1462 default:
1463 assert(false, "unexpected memory operand in pd_implicit_null_fixup()");
1464 return;
1465 }
1466 node->_opnds[opcnt] = new_memory;
1467 }
1469 // Advertise here if the CPU requires explicit rounding operations
1470 // to implement the UseStrictFP mode.
1471 const bool Matcher::strict_fp_requires_explicit_rounding = true;
1473 // Are floats conerted to double when stored to stack during deoptimization?
1474 // On x32 it is stored with convertion only when FPU is used for floats.
1475 bool Matcher::float_in_double() { return (UseSSE == 0); }
1477 // Do ints take an entire long register or just half?
1478 const bool Matcher::int_in_long = false;
1480 // Return whether or not this register is ever used as an argument. This
1481 // function is used on startup to build the trampoline stubs in generateOptoStub.
1482 // Registers not mentioned will be killed by the VM call in the trampoline, and
1483 // arguments in those registers not be available to the callee.
1484 bool Matcher::can_be_java_arg( int reg ) {
1485 if( reg == ECX_num || reg == EDX_num ) return true;
1486 if( (reg == XMM0a_num || reg == XMM1a_num) && UseSSE>=1 ) return true;
1487 if( (reg == XMM0b_num || reg == XMM1b_num) && UseSSE>=2 ) return true;
1488 return false;
1489 }
1491 bool Matcher::is_spillable_arg( int reg ) {
1492 return can_be_java_arg(reg);
1493 }
1495 bool Matcher::use_asm_for_ldiv_by_con( jlong divisor ) {
1496 // Use hardware integer DIV instruction when
1497 // it is faster than a code which use multiply.
1498 // Only when constant divisor fits into 32 bit
1499 // (min_jint is excluded to get only correct
1500 // positive 32 bit values from negative).
1501 return VM_Version::has_fast_idiv() &&
1502 (divisor == (int)divisor && divisor != min_jint);
1503 }
1505 // Register for DIVI projection of divmodI
1506 RegMask Matcher::divI_proj_mask() {
1507 return EAX_REG_mask;
1508 }
1510 // Register for MODI projection of divmodI
1511 RegMask Matcher::modI_proj_mask() {
1512 return EDX_REG_mask;
1513 }
1515 // Register for DIVL projection of divmodL
1516 RegMask Matcher::divL_proj_mask() {
1517 ShouldNotReachHere();
1518 return RegMask();
1519 }
1521 // Register for MODL projection of divmodL
1522 RegMask Matcher::modL_proj_mask() {
1523 ShouldNotReachHere();
1524 return RegMask();
1525 }
1527 const RegMask Matcher::method_handle_invoke_SP_save_mask() {
1528 return EBP_REG_mask;
1529 }
1531 // Returns true if the high 32 bits of the value is known to be zero.
1532 bool is_operand_hi32_zero(Node* n) {
1533 int opc = n->Opcode();
1534 if (opc == Op_LoadUI2L) {
1535 return true;
1536 }
1537 if (opc == Op_AndL) {
1538 Node* o2 = n->in(2);
1539 if (o2->is_Con() && (o2->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1540 return true;
1541 }
1542 }
1543 if (opc == Op_ConL && (n->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1544 return true;
1545 }
1546 return false;
1547 }
1549 %}
1551 //----------ENCODING BLOCK-----------------------------------------------------
1552 // This block specifies the encoding classes used by the compiler to output
1553 // byte streams. Encoding classes generate functions which are called by
1554 // Machine Instruction Nodes in order to generate the bit encoding of the
1555 // instruction. Operands specify their base encoding interface with the
1556 // interface keyword. There are currently supported four interfaces,
1557 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an
1558 // operand to generate a function which returns its register number when
1559 // queried. CONST_INTER causes an operand to generate a function which
1560 // returns the value of the constant when queried. MEMORY_INTER causes an
1561 // operand to generate four functions which return the Base Register, the
1562 // Index Register, the Scale Value, and the Offset Value of the operand when
1563 // queried. COND_INTER causes an operand to generate six functions which
1564 // return the encoding code (ie - encoding bits for the instruction)
1565 // associated with each basic boolean condition for a conditional instruction.
1566 // Instructions specify two basic values for encoding. They use the
1567 // ins_encode keyword to specify their encoding class (which must be one of
1568 // the class names specified in the encoding block), and they use the
1569 // opcode keyword to specify, in order, their primary, secondary, and
1570 // tertiary opcode. Only the opcode sections which a particular instruction
1571 // needs for encoding need to be specified.
1572 encode %{
1573 // Build emit functions for each basic byte or larger field in the intel
1574 // encoding scheme (opcode, rm, sib, immediate), and call them from C++
1575 // code in the enc_class source block. Emit functions will live in the
1576 // main source block for now. In future, we can generalize this by
1577 // adding a syntax that specifies the sizes of fields in an order,
1578 // so that the adlc can build the emit functions automagically
1580 // Emit primary opcode
1581 enc_class OpcP %{
1582 emit_opcode(cbuf, $primary);
1583 %}
1585 // Emit secondary opcode
1586 enc_class OpcS %{
1587 emit_opcode(cbuf, $secondary);
1588 %}
1590 // Emit opcode directly
1591 enc_class Opcode(immI d8) %{
1592 emit_opcode(cbuf, $d8$$constant);
1593 %}
1595 enc_class SizePrefix %{
1596 emit_opcode(cbuf,0x66);
1597 %}
1599 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
1600 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1601 %}
1603 enc_class OpcRegReg (immI opcode, eRegI dst, eRegI src) %{ // OpcRegReg(Many)
1604 emit_opcode(cbuf,$opcode$$constant);
1605 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1606 %}
1608 enc_class mov_r32_imm0( eRegI dst ) %{
1609 emit_opcode( cbuf, 0xB8 + $dst$$reg ); // 0xB8+ rd -- MOV r32 ,imm32
1610 emit_d32 ( cbuf, 0x0 ); // imm32==0x0
1611 %}
1613 enc_class cdq_enc %{
1614 // Full implementation of Java idiv and irem; checks for
1615 // special case as described in JVM spec., p.243 & p.271.
1616 //
1617 // normal case special case
1618 //
1619 // input : rax,: dividend min_int
1620 // reg: divisor -1
1621 //
1622 // output: rax,: quotient (= rax, idiv reg) min_int
1623 // rdx: remainder (= rax, irem reg) 0
1624 //
1625 // Code sequnce:
1626 //
1627 // 81 F8 00 00 00 80 cmp rax,80000000h
1628 // 0F 85 0B 00 00 00 jne normal_case
1629 // 33 D2 xor rdx,edx
1630 // 83 F9 FF cmp rcx,0FFh
1631 // 0F 84 03 00 00 00 je done
1632 // normal_case:
1633 // 99 cdq
1634 // F7 F9 idiv rax,ecx
1635 // done:
1636 //
1637 emit_opcode(cbuf,0x81); emit_d8(cbuf,0xF8);
1638 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00);
1639 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x80); // cmp rax,80000000h
1640 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x85);
1641 emit_opcode(cbuf,0x0B); emit_d8(cbuf,0x00);
1642 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // jne normal_case
1643 emit_opcode(cbuf,0x33); emit_d8(cbuf,0xD2); // xor rdx,edx
1644 emit_opcode(cbuf,0x83); emit_d8(cbuf,0xF9); emit_d8(cbuf,0xFF); // cmp rcx,0FFh
1645 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x84);
1646 emit_opcode(cbuf,0x03); emit_d8(cbuf,0x00);
1647 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // je done
1648 // normal_case:
1649 emit_opcode(cbuf,0x99); // cdq
1650 // idiv (note: must be emitted by the user of this rule)
1651 // normal:
1652 %}
1654 // Dense encoding for older common ops
1655 enc_class Opc_plus(immI opcode, eRegI reg) %{
1656 emit_opcode(cbuf, $opcode$$constant + $reg$$reg);
1657 %}
1660 // Opcde enc_class for 8/32 bit immediate instructions with sign-extension
1661 enc_class OpcSE (immI imm) %{ // Emit primary opcode and set sign-extend bit
1662 // Check for 8-bit immediate, and set sign extend bit in opcode
1663 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1664 emit_opcode(cbuf, $primary | 0x02);
1665 }
1666 else { // If 32-bit immediate
1667 emit_opcode(cbuf, $primary);
1668 }
1669 %}
1671 enc_class OpcSErm (eRegI dst, immI imm) %{ // OpcSEr/m
1672 // Emit primary opcode and set sign-extend bit
1673 // Check for 8-bit immediate, and set sign extend bit in opcode
1674 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1675 emit_opcode(cbuf, $primary | 0x02); }
1676 else { // If 32-bit immediate
1677 emit_opcode(cbuf, $primary);
1678 }
1679 // Emit r/m byte with secondary opcode, after primary opcode.
1680 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1681 %}
1683 enc_class Con8or32 (immI imm) %{ // Con8or32(storeImmI), 8 or 32 bits
1684 // Check for 8-bit immediate, and set sign extend bit in opcode
1685 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1686 $$$emit8$imm$$constant;
1687 }
1688 else { // If 32-bit immediate
1689 // Output immediate
1690 $$$emit32$imm$$constant;
1691 }
1692 %}
1694 enc_class Long_OpcSErm_Lo(eRegL dst, immL imm) %{
1695 // Emit primary opcode and set sign-extend bit
1696 // Check for 8-bit immediate, and set sign extend bit in opcode
1697 int con = (int)$imm$$constant; // Throw away top bits
1698 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1699 // Emit r/m byte with secondary opcode, after primary opcode.
1700 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1701 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1702 else emit_d32(cbuf,con);
1703 %}
1705 enc_class Long_OpcSErm_Hi(eRegL dst, immL imm) %{
1706 // Emit primary opcode and set sign-extend bit
1707 // Check for 8-bit immediate, and set sign extend bit in opcode
1708 int con = (int)($imm$$constant >> 32); // Throw away bottom bits
1709 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1710 // Emit r/m byte with tertiary opcode, after primary opcode.
1711 emit_rm(cbuf, 0x3, $tertiary, HIGH_FROM_LOW($dst$$reg));
1712 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1713 else emit_d32(cbuf,con);
1714 %}
1716 enc_class Lbl (label labl) %{ // GOTO
1717 Label *l = $labl$$label;
1718 emit_d32(cbuf, (l->loc_pos() - (cbuf.insts_size()+4)));
1719 %}
1721 enc_class LblShort (label labl) %{ // GOTO
1722 Label *l = $labl$$label;
1723 int disp = l->loc_pos() - (cbuf.insts_size()+1);
1724 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1725 emit_d8(cbuf, disp);
1726 %}
1728 enc_class OpcSReg (eRegI dst) %{ // BSWAP
1729 emit_cc(cbuf, $secondary, $dst$$reg );
1730 %}
1732 enc_class bswap_long_bytes(eRegL dst) %{ // BSWAP
1733 int destlo = $dst$$reg;
1734 int desthi = HIGH_FROM_LOW(destlo);
1735 // bswap lo
1736 emit_opcode(cbuf, 0x0F);
1737 emit_cc(cbuf, 0xC8, destlo);
1738 // bswap hi
1739 emit_opcode(cbuf, 0x0F);
1740 emit_cc(cbuf, 0xC8, desthi);
1741 // xchg lo and hi
1742 emit_opcode(cbuf, 0x87);
1743 emit_rm(cbuf, 0x3, destlo, desthi);
1744 %}
1746 enc_class RegOpc (eRegI div) %{ // IDIV, IMOD, JMP indirect, ...
1747 emit_rm(cbuf, 0x3, $secondary, $div$$reg );
1748 %}
1750 enc_class Jcc (cmpOp cop, label labl) %{ // JCC
1751 Label *l = $labl$$label;
1752 $$$emit8$primary;
1753 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1754 emit_d32(cbuf, (l->loc_pos() - (cbuf.insts_size()+4)));
1755 %}
1757 enc_class JccShort (cmpOp cop, label labl) %{ // JCC
1758 Label *l = $labl$$label;
1759 emit_cc(cbuf, $primary, $cop$$cmpcode);
1760 int disp = l->loc_pos() - (cbuf.insts_size()+1);
1761 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1762 emit_d8(cbuf, disp);
1763 %}
1765 enc_class enc_cmov(cmpOp cop ) %{ // CMOV
1766 $$$emit8$primary;
1767 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1768 %}
1770 enc_class enc_cmov_d(cmpOp cop, regD src ) %{ // CMOV
1771 int op = 0xDA00 + $cop$$cmpcode + ($src$$reg-1);
1772 emit_d8(cbuf, op >> 8 );
1773 emit_d8(cbuf, op & 255);
1774 %}
1776 // emulate a CMOV with a conditional branch around a MOV
1777 enc_class enc_cmov_branch( cmpOp cop, immI brOffs ) %{ // CMOV
1778 // Invert sense of branch from sense of CMOV
1779 emit_cc( cbuf, 0x70, ($cop$$cmpcode^1) );
1780 emit_d8( cbuf, $brOffs$$constant );
1781 %}
1783 enc_class enc_PartialSubtypeCheck( ) %{
1784 Register Redi = as_Register(EDI_enc); // result register
1785 Register Reax = as_Register(EAX_enc); // super class
1786 Register Recx = as_Register(ECX_enc); // killed
1787 Register Resi = as_Register(ESI_enc); // sub class
1788 Label miss;
1790 MacroAssembler _masm(&cbuf);
1791 __ check_klass_subtype_slow_path(Resi, Reax, Recx, Redi,
1792 NULL, &miss,
1793 /*set_cond_codes:*/ true);
1794 if ($primary) {
1795 __ xorptr(Redi, Redi);
1796 }
1797 __ bind(miss);
1798 %}
1800 enc_class FFree_Float_Stack_All %{ // Free_Float_Stack_All
1801 MacroAssembler masm(&cbuf);
1802 int start = masm.offset();
1803 if (UseSSE >= 2) {
1804 if (VerifyFPU) {
1805 masm.verify_FPU(0, "must be empty in SSE2+ mode");
1806 }
1807 } else {
1808 // External c_calling_convention expects the FPU stack to be 'clean'.
1809 // Compiled code leaves it dirty. Do cleanup now.
1810 masm.empty_FPU_stack();
1811 }
1812 if (sizeof_FFree_Float_Stack_All == -1) {
1813 sizeof_FFree_Float_Stack_All = masm.offset() - start;
1814 } else {
1815 assert(masm.offset() - start == sizeof_FFree_Float_Stack_All, "wrong size");
1816 }
1817 %}
1819 enc_class Verify_FPU_For_Leaf %{
1820 if( VerifyFPU ) {
1821 MacroAssembler masm(&cbuf);
1822 masm.verify_FPU( -3, "Returning from Runtime Leaf call");
1823 }
1824 %}
1826 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime, Java_To_Runtime_Leaf
1827 // This is the instruction starting address for relocation info.
1828 cbuf.set_insts_mark();
1829 $$$emit8$primary;
1830 // CALL directly to the runtime
1831 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1832 runtime_call_Relocation::spec(), RELOC_IMM32 );
1834 if (UseSSE >= 2) {
1835 MacroAssembler _masm(&cbuf);
1836 BasicType rt = tf()->return_type();
1838 if ((rt == T_FLOAT || rt == T_DOUBLE) && !return_value_is_used()) {
1839 // A C runtime call where the return value is unused. In SSE2+
1840 // mode the result needs to be removed from the FPU stack. It's
1841 // likely that this function call could be removed by the
1842 // optimizer if the C function is a pure function.
1843 __ ffree(0);
1844 } else if (rt == T_FLOAT) {
1845 __ lea(rsp, Address(rsp, -4));
1846 __ fstp_s(Address(rsp, 0));
1847 __ movflt(xmm0, Address(rsp, 0));
1848 __ lea(rsp, Address(rsp, 4));
1849 } else if (rt == T_DOUBLE) {
1850 __ lea(rsp, Address(rsp, -8));
1851 __ fstp_d(Address(rsp, 0));
1852 __ movdbl(xmm0, Address(rsp, 0));
1853 __ lea(rsp, Address(rsp, 8));
1854 }
1855 }
1856 %}
1859 enc_class pre_call_FPU %{
1860 // If method sets FPU control word restore it here
1861 debug_only(int off0 = cbuf.insts_size());
1862 if( Compile::current()->in_24_bit_fp_mode() ) {
1863 MacroAssembler masm(&cbuf);
1864 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1865 }
1866 debug_only(int off1 = cbuf.insts_size());
1867 assert(off1 - off0 == pre_call_FPU_size(), "correct size prediction");
1868 %}
1870 enc_class post_call_FPU %{
1871 // If method sets FPU control word do it here also
1872 if( Compile::current()->in_24_bit_fp_mode() ) {
1873 MacroAssembler masm(&cbuf);
1874 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
1875 }
1876 %}
1878 enc_class preserve_SP %{
1879 debug_only(int off0 = cbuf.insts_size());
1880 MacroAssembler _masm(&cbuf);
1881 // RBP is preserved across all calls, even compiled calls.
1882 // Use it to preserve RSP in places where the callee might change the SP.
1883 __ movptr(rbp_mh_SP_save, rsp);
1884 debug_only(int off1 = cbuf.insts_size());
1885 assert(off1 - off0 == preserve_SP_size(), "correct size prediction");
1886 %}
1888 enc_class restore_SP %{
1889 MacroAssembler _masm(&cbuf);
1890 __ movptr(rsp, rbp_mh_SP_save);
1891 %}
1893 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL
1894 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1895 // who we intended to call.
1896 cbuf.set_insts_mark();
1897 $$$emit8$primary;
1898 if ( !_method ) {
1899 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1900 runtime_call_Relocation::spec(), RELOC_IMM32 );
1901 } else if(_optimized_virtual) {
1902 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1903 opt_virtual_call_Relocation::spec(), RELOC_IMM32 );
1904 } else {
1905 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1906 static_call_Relocation::spec(), RELOC_IMM32 );
1907 }
1908 if( _method ) { // Emit stub for static call
1909 emit_java_to_interp(cbuf);
1910 }
1911 %}
1913 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL
1914 // !!!!!
1915 // Generate "Mov EAX,0x00", placeholder instruction to load oop-info
1916 // emit_call_dynamic_prologue( cbuf );
1917 cbuf.set_insts_mark();
1918 emit_opcode(cbuf, 0xB8 + EAX_enc); // mov EAX,-1
1919 emit_d32_reloc(cbuf, (int)Universe::non_oop_word(), oop_Relocation::spec_for_immediate(), RELOC_IMM32);
1920 address virtual_call_oop_addr = cbuf.insts_mark();
1921 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1922 // who we intended to call.
1923 cbuf.set_insts_mark();
1924 $$$emit8$primary;
1925 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1926 virtual_call_Relocation::spec(virtual_call_oop_addr), RELOC_IMM32 );
1927 %}
1929 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL
1930 int disp = in_bytes(methodOopDesc::from_compiled_offset());
1931 assert( -128 <= disp && disp <= 127, "compiled_code_offset isn't small");
1933 // CALL *[EAX+in_bytes(methodOopDesc::from_compiled_code_entry_point_offset())]
1934 cbuf.set_insts_mark();
1935 $$$emit8$primary;
1936 emit_rm(cbuf, 0x01, $secondary, EAX_enc ); // R/M byte
1937 emit_d8(cbuf, disp); // Displacement
1939 %}
1941 enc_class Xor_Reg (eRegI dst) %{
1942 emit_opcode(cbuf, 0x33);
1943 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
1944 %}
1946 // Following encoding is no longer used, but may be restored if calling
1947 // convention changes significantly.
1948 // Became: Xor_Reg(EBP), Java_To_Runtime( labl )
1949 //
1950 // enc_class Java_Interpreter_Call (label labl) %{ // JAVA INTERPRETER CALL
1951 // // int ic_reg = Matcher::inline_cache_reg();
1952 // // int ic_encode = Matcher::_regEncode[ic_reg];
1953 // // int imo_reg = Matcher::interpreter_method_oop_reg();
1954 // // int imo_encode = Matcher::_regEncode[imo_reg];
1955 //
1956 // // // Interpreter expects method_oop in EBX, currently a callee-saved register,
1957 // // // so we load it immediately before the call
1958 // // emit_opcode(cbuf, 0x8B); // MOV imo_reg,ic_reg # method_oop
1959 // // emit_rm(cbuf, 0x03, imo_encode, ic_encode ); // R/M byte
1960 //
1961 // // xor rbp,ebp
1962 // emit_opcode(cbuf, 0x33);
1963 // emit_rm(cbuf, 0x3, EBP_enc, EBP_enc);
1964 //
1965 // // CALL to interpreter.
1966 // cbuf.set_insts_mark();
1967 // $$$emit8$primary;
1968 // emit_d32_reloc(cbuf, ($labl$$label - (int)(cbuf.insts_end()) - 4),
1969 // runtime_call_Relocation::spec(), RELOC_IMM32 );
1970 // %}
1972 enc_class RegOpcImm (eRegI dst, immI8 shift) %{ // SHL, SAR, SHR
1973 $$$emit8$primary;
1974 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1975 $$$emit8$shift$$constant;
1976 %}
1978 enc_class LdImmI (eRegI dst, immI src) %{ // Load Immediate
1979 // Load immediate does not have a zero or sign extended version
1980 // for 8-bit immediates
1981 emit_opcode(cbuf, 0xB8 + $dst$$reg);
1982 $$$emit32$src$$constant;
1983 %}
1985 enc_class LdImmP (eRegI dst, immI src) %{ // Load Immediate
1986 // Load immediate does not have a zero or sign extended version
1987 // for 8-bit immediates
1988 emit_opcode(cbuf, $primary + $dst$$reg);
1989 $$$emit32$src$$constant;
1990 %}
1992 enc_class LdImmL_Lo( eRegL dst, immL src) %{ // Load Immediate
1993 // Load immediate does not have a zero or sign extended version
1994 // for 8-bit immediates
1995 int dst_enc = $dst$$reg;
1996 int src_con = $src$$constant & 0x0FFFFFFFFL;
1997 if (src_con == 0) {
1998 // xor dst, dst
1999 emit_opcode(cbuf, 0x33);
2000 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
2001 } else {
2002 emit_opcode(cbuf, $primary + dst_enc);
2003 emit_d32(cbuf, src_con);
2004 }
2005 %}
2007 enc_class LdImmL_Hi( eRegL dst, immL src) %{ // Load Immediate
2008 // Load immediate does not have a zero or sign extended version
2009 // for 8-bit immediates
2010 int dst_enc = $dst$$reg + 2;
2011 int src_con = ((julong)($src$$constant)) >> 32;
2012 if (src_con == 0) {
2013 // xor dst, dst
2014 emit_opcode(cbuf, 0x33);
2015 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
2016 } else {
2017 emit_opcode(cbuf, $primary + dst_enc);
2018 emit_d32(cbuf, src_con);
2019 }
2020 %}
2023 enc_class MovI2X_reg(regX dst, eRegI src) %{
2024 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2025 emit_opcode(cbuf, 0x0F );
2026 emit_opcode(cbuf, 0x6E );
2027 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2028 %}
2030 enc_class MovX2I_reg(eRegI dst, regX src) %{
2031 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2032 emit_opcode(cbuf, 0x0F );
2033 emit_opcode(cbuf, 0x7E );
2034 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2035 %}
2037 enc_class MovL2XD_reg(regXD dst, eRegL src, regXD tmp) %{
2038 { // MOVD $dst,$src.lo
2039 emit_opcode(cbuf,0x66);
2040 emit_opcode(cbuf,0x0F);
2041 emit_opcode(cbuf,0x6E);
2042 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2043 }
2044 { // MOVD $tmp,$src.hi
2045 emit_opcode(cbuf,0x66);
2046 emit_opcode(cbuf,0x0F);
2047 emit_opcode(cbuf,0x6E);
2048 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
2049 }
2050 { // PUNPCKLDQ $dst,$tmp
2051 emit_opcode(cbuf,0x66);
2052 emit_opcode(cbuf,0x0F);
2053 emit_opcode(cbuf,0x62);
2054 emit_rm(cbuf, 0x3, $dst$$reg, $tmp$$reg);
2055 }
2056 %}
2058 enc_class MovXD2L_reg(eRegL dst, regXD src, regXD tmp) %{
2059 { // MOVD $dst.lo,$src
2060 emit_opcode(cbuf,0x66);
2061 emit_opcode(cbuf,0x0F);
2062 emit_opcode(cbuf,0x7E);
2063 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2064 }
2065 { // PSHUFLW $tmp,$src,0x4E (01001110b)
2066 emit_opcode(cbuf,0xF2);
2067 emit_opcode(cbuf,0x0F);
2068 emit_opcode(cbuf,0x70);
2069 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
2070 emit_d8(cbuf, 0x4E);
2071 }
2072 { // MOVD $dst.hi,$tmp
2073 emit_opcode(cbuf,0x66);
2074 emit_opcode(cbuf,0x0F);
2075 emit_opcode(cbuf,0x7E);
2076 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
2077 }
2078 %}
2081 // Encode a reg-reg copy. If it is useless, then empty encoding.
2082 enc_class enc_Copy( eRegI dst, eRegI src ) %{
2083 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2084 %}
2086 enc_class enc_CopyL_Lo( eRegI dst, eRegL src ) %{
2087 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2088 %}
2090 // Encode xmm reg-reg copy. If it is useless, then empty encoding.
2091 enc_class enc_CopyXD( RegXD dst, RegXD src ) %{
2092 encode_CopyXD( cbuf, $dst$$reg, $src$$reg );
2093 %}
2095 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
2096 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2097 %}
2099 enc_class RegReg_Lo(eRegL dst, eRegL src) %{ // RegReg(Many)
2100 $$$emit8$primary;
2101 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2102 %}
2104 enc_class RegReg_Hi(eRegL dst, eRegL src) %{ // RegReg(Many)
2105 $$$emit8$secondary;
2106 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2107 %}
2109 enc_class RegReg_Lo2(eRegL dst, eRegL src) %{ // RegReg(Many)
2110 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2111 %}
2113 enc_class RegReg_Hi2(eRegL dst, eRegL src) %{ // RegReg(Many)
2114 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2115 %}
2117 enc_class RegReg_HiLo( eRegL src, eRegI dst ) %{
2118 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($src$$reg));
2119 %}
2121 enc_class Con32 (immI src) %{ // Con32(storeImmI)
2122 // Output immediate
2123 $$$emit32$src$$constant;
2124 %}
2126 enc_class Con32F_as_bits(immF src) %{ // storeF_imm
2127 // Output Float immediate bits
2128 jfloat jf = $src$$constant;
2129 int jf_as_bits = jint_cast( jf );
2130 emit_d32(cbuf, jf_as_bits);
2131 %}
2133 enc_class Con32XF_as_bits(immXF src) %{ // storeX_imm
2134 // Output Float immediate bits
2135 jfloat jf = $src$$constant;
2136 int jf_as_bits = jint_cast( jf );
2137 emit_d32(cbuf, jf_as_bits);
2138 %}
2140 enc_class Con16 (immI src) %{ // Con16(storeImmI)
2141 // Output immediate
2142 $$$emit16$src$$constant;
2143 %}
2145 enc_class Con_d32(immI src) %{
2146 emit_d32(cbuf,$src$$constant);
2147 %}
2149 enc_class conmemref (eRegP t1) %{ // Con32(storeImmI)
2150 // Output immediate memory reference
2151 emit_rm(cbuf, 0x00, $t1$$reg, 0x05 );
2152 emit_d32(cbuf, 0x00);
2153 %}
2155 enc_class lock_prefix( ) %{
2156 if( os::is_MP() )
2157 emit_opcode(cbuf,0xF0); // [Lock]
2158 %}
2160 // Cmp-xchg long value.
2161 // Note: we need to swap rbx, and rcx before and after the
2162 // cmpxchg8 instruction because the instruction uses
2163 // rcx as the high order word of the new value to store but
2164 // our register encoding uses rbx,.
2165 enc_class enc_cmpxchg8(eSIRegP mem_ptr) %{
2167 // XCHG rbx,ecx
2168 emit_opcode(cbuf,0x87);
2169 emit_opcode(cbuf,0xD9);
2170 // [Lock]
2171 if( os::is_MP() )
2172 emit_opcode(cbuf,0xF0);
2173 // CMPXCHG8 [Eptr]
2174 emit_opcode(cbuf,0x0F);
2175 emit_opcode(cbuf,0xC7);
2176 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2177 // XCHG rbx,ecx
2178 emit_opcode(cbuf,0x87);
2179 emit_opcode(cbuf,0xD9);
2180 %}
2182 enc_class enc_cmpxchg(eSIRegP mem_ptr) %{
2183 // [Lock]
2184 if( os::is_MP() )
2185 emit_opcode(cbuf,0xF0);
2187 // CMPXCHG [Eptr]
2188 emit_opcode(cbuf,0x0F);
2189 emit_opcode(cbuf,0xB1);
2190 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2191 %}
2193 enc_class enc_flags_ne_to_boolean( iRegI res ) %{
2194 int res_encoding = $res$$reg;
2196 // MOV res,0
2197 emit_opcode( cbuf, 0xB8 + res_encoding);
2198 emit_d32( cbuf, 0 );
2199 // JNE,s fail
2200 emit_opcode(cbuf,0x75);
2201 emit_d8(cbuf, 5 );
2202 // MOV res,1
2203 emit_opcode( cbuf, 0xB8 + res_encoding);
2204 emit_d32( cbuf, 1 );
2205 // fail:
2206 %}
2208 enc_class set_instruction_start( ) %{
2209 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2210 %}
2212 enc_class RegMem (eRegI ereg, memory mem) %{ // emit_reg_mem
2213 int reg_encoding = $ereg$$reg;
2214 int base = $mem$$base;
2215 int index = $mem$$index;
2216 int scale = $mem$$scale;
2217 int displace = $mem$$disp;
2218 bool disp_is_oop = $mem->disp_is_oop();
2219 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2220 %}
2222 enc_class RegMem_Hi(eRegL ereg, memory mem) %{ // emit_reg_mem
2223 int reg_encoding = HIGH_FROM_LOW($ereg$$reg); // Hi register of pair, computed from lo
2224 int base = $mem$$base;
2225 int index = $mem$$index;
2226 int scale = $mem$$scale;
2227 int displace = $mem$$disp + 4; // Offset is 4 further in memory
2228 assert( !$mem->disp_is_oop(), "Cannot add 4 to oop" );
2229 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, false/*disp_is_oop*/);
2230 %}
2232 enc_class move_long_small_shift( eRegL dst, immI_1_31 cnt ) %{
2233 int r1, r2;
2234 if( $tertiary == 0xA4 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2235 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2236 emit_opcode(cbuf,0x0F);
2237 emit_opcode(cbuf,$tertiary);
2238 emit_rm(cbuf, 0x3, r1, r2);
2239 emit_d8(cbuf,$cnt$$constant);
2240 emit_d8(cbuf,$primary);
2241 emit_rm(cbuf, 0x3, $secondary, r1);
2242 emit_d8(cbuf,$cnt$$constant);
2243 %}
2245 enc_class move_long_big_shift_sign( eRegL dst, immI_32_63 cnt ) %{
2246 emit_opcode( cbuf, 0x8B ); // Move
2247 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2248 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2249 emit_d8(cbuf,$primary);
2250 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
2251 emit_d8(cbuf,$cnt$$constant-32);
2252 }
2253 emit_d8(cbuf,$primary);
2254 emit_rm(cbuf, 0x3, $secondary, HIGH_FROM_LOW($dst$$reg));
2255 emit_d8(cbuf,31);
2256 %}
2258 enc_class move_long_big_shift_clr( eRegL dst, immI_32_63 cnt ) %{
2259 int r1, r2;
2260 if( $secondary == 0x5 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2261 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2263 emit_opcode( cbuf, 0x8B ); // Move r1,r2
2264 emit_rm(cbuf, 0x3, r1, r2);
2265 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2266 emit_opcode(cbuf,$primary);
2267 emit_rm(cbuf, 0x3, $secondary, r1);
2268 emit_d8(cbuf,$cnt$$constant-32);
2269 }
2270 emit_opcode(cbuf,0x33); // XOR r2,r2
2271 emit_rm(cbuf, 0x3, r2, r2);
2272 %}
2274 // Clone of RegMem but accepts an extra parameter to access each
2275 // half of a double in memory; it never needs relocation info.
2276 enc_class Mov_MemD_half_to_Reg (immI opcode, memory mem, immI disp_for_half, eRegI rm_reg) %{
2277 emit_opcode(cbuf,$opcode$$constant);
2278 int reg_encoding = $rm_reg$$reg;
2279 int base = $mem$$base;
2280 int index = $mem$$index;
2281 int scale = $mem$$scale;
2282 int displace = $mem$$disp + $disp_for_half$$constant;
2283 bool disp_is_oop = false;
2284 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2285 %}
2287 // !!!!! Special Custom Code used by MemMove, and stack access instructions !!!!!
2288 //
2289 // Clone of RegMem except the RM-byte's reg/opcode field is an ADLC-time constant
2290 // and it never needs relocation information.
2291 // Frequently used to move data between FPU's Stack Top and memory.
2292 enc_class RMopc_Mem_no_oop (immI rm_opcode, memory mem) %{
2293 int rm_byte_opcode = $rm_opcode$$constant;
2294 int base = $mem$$base;
2295 int index = $mem$$index;
2296 int scale = $mem$$scale;
2297 int displace = $mem$$disp;
2298 assert( !$mem->disp_is_oop(), "No oops here because no relo info allowed" );
2299 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, false);
2300 %}
2302 enc_class RMopc_Mem (immI rm_opcode, memory mem) %{
2303 int rm_byte_opcode = $rm_opcode$$constant;
2304 int base = $mem$$base;
2305 int index = $mem$$index;
2306 int scale = $mem$$scale;
2307 int displace = $mem$$disp;
2308 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2309 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
2310 %}
2312 enc_class RegLea (eRegI dst, eRegI src0, immI src1 ) %{ // emit_reg_lea
2313 int reg_encoding = $dst$$reg;
2314 int base = $src0$$reg; // 0xFFFFFFFF indicates no base
2315 int index = 0x04; // 0x04 indicates no index
2316 int scale = 0x00; // 0x00 indicates no scale
2317 int displace = $src1$$constant; // 0x00 indicates no displacement
2318 bool disp_is_oop = false;
2319 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2320 %}
2322 enc_class min_enc (eRegI dst, eRegI src) %{ // MIN
2323 // Compare dst,src
2324 emit_opcode(cbuf,0x3B);
2325 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2326 // jmp dst < src around move
2327 emit_opcode(cbuf,0x7C);
2328 emit_d8(cbuf,2);
2329 // move dst,src
2330 emit_opcode(cbuf,0x8B);
2331 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2332 %}
2334 enc_class max_enc (eRegI dst, eRegI src) %{ // MAX
2335 // Compare dst,src
2336 emit_opcode(cbuf,0x3B);
2337 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2338 // jmp dst > src around move
2339 emit_opcode(cbuf,0x7F);
2340 emit_d8(cbuf,2);
2341 // move dst,src
2342 emit_opcode(cbuf,0x8B);
2343 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2344 %}
2346 enc_class enc_FP_store(memory mem, regD src) %{
2347 // If src is FPR1, we can just FST to store it.
2348 // Else we need to FLD it to FPR1, then FSTP to store/pop it.
2349 int reg_encoding = 0x2; // Just store
2350 int base = $mem$$base;
2351 int index = $mem$$index;
2352 int scale = $mem$$scale;
2353 int displace = $mem$$disp;
2354 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2355 if( $src$$reg != FPR1L_enc ) {
2356 reg_encoding = 0x3; // Store & pop
2357 emit_opcode( cbuf, 0xD9 ); // FLD (i.e., push it)
2358 emit_d8( cbuf, 0xC0-1+$src$$reg );
2359 }
2360 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2361 emit_opcode(cbuf,$primary);
2362 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2363 %}
2365 enc_class neg_reg(eRegI dst) %{
2366 // NEG $dst
2367 emit_opcode(cbuf,0xF7);
2368 emit_rm(cbuf, 0x3, 0x03, $dst$$reg );
2369 %}
2371 enc_class setLT_reg(eCXRegI dst) %{
2372 // SETLT $dst
2373 emit_opcode(cbuf,0x0F);
2374 emit_opcode(cbuf,0x9C);
2375 emit_rm( cbuf, 0x3, 0x4, $dst$$reg );
2376 %}
2378 enc_class enc_cmpLTP(ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp) %{ // cadd_cmpLT
2379 int tmpReg = $tmp$$reg;
2381 // SUB $p,$q
2382 emit_opcode(cbuf,0x2B);
2383 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2384 // SBB $tmp,$tmp
2385 emit_opcode(cbuf,0x1B);
2386 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2387 // AND $tmp,$y
2388 emit_opcode(cbuf,0x23);
2389 emit_rm(cbuf, 0x3, tmpReg, $y$$reg);
2390 // ADD $p,$tmp
2391 emit_opcode(cbuf,0x03);
2392 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2393 %}
2395 enc_class enc_cmpLTP_mem(eRegI p, eRegI q, memory mem, eCXRegI tmp) %{ // cadd_cmpLT
2396 int tmpReg = $tmp$$reg;
2398 // SUB $p,$q
2399 emit_opcode(cbuf,0x2B);
2400 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2401 // SBB $tmp,$tmp
2402 emit_opcode(cbuf,0x1B);
2403 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2404 // AND $tmp,$y
2405 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2406 emit_opcode(cbuf,0x23);
2407 int reg_encoding = tmpReg;
2408 int base = $mem$$base;
2409 int index = $mem$$index;
2410 int scale = $mem$$scale;
2411 int displace = $mem$$disp;
2412 bool disp_is_oop = $mem->disp_is_oop();
2413 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2414 // ADD $p,$tmp
2415 emit_opcode(cbuf,0x03);
2416 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2417 %}
2419 enc_class shift_left_long( eRegL dst, eCXRegI shift ) %{
2420 // TEST shift,32
2421 emit_opcode(cbuf,0xF7);
2422 emit_rm(cbuf, 0x3, 0, ECX_enc);
2423 emit_d32(cbuf,0x20);
2424 // JEQ,s small
2425 emit_opcode(cbuf, 0x74);
2426 emit_d8(cbuf, 0x04);
2427 // MOV $dst.hi,$dst.lo
2428 emit_opcode( cbuf, 0x8B );
2429 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2430 // CLR $dst.lo
2431 emit_opcode(cbuf, 0x33);
2432 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
2433 // small:
2434 // SHLD $dst.hi,$dst.lo,$shift
2435 emit_opcode(cbuf,0x0F);
2436 emit_opcode(cbuf,0xA5);
2437 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2438 // SHL $dst.lo,$shift"
2439 emit_opcode(cbuf,0xD3);
2440 emit_rm(cbuf, 0x3, 0x4, $dst$$reg );
2441 %}
2443 enc_class shift_right_long( eRegL dst, eCXRegI shift ) %{
2444 // TEST shift,32
2445 emit_opcode(cbuf,0xF7);
2446 emit_rm(cbuf, 0x3, 0, ECX_enc);
2447 emit_d32(cbuf,0x20);
2448 // JEQ,s small
2449 emit_opcode(cbuf, 0x74);
2450 emit_d8(cbuf, 0x04);
2451 // MOV $dst.lo,$dst.hi
2452 emit_opcode( cbuf, 0x8B );
2453 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2454 // CLR $dst.hi
2455 emit_opcode(cbuf, 0x33);
2456 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($dst$$reg));
2457 // small:
2458 // SHRD $dst.lo,$dst.hi,$shift
2459 emit_opcode(cbuf,0x0F);
2460 emit_opcode(cbuf,0xAD);
2461 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2462 // SHR $dst.hi,$shift"
2463 emit_opcode(cbuf,0xD3);
2464 emit_rm(cbuf, 0x3, 0x5, HIGH_FROM_LOW($dst$$reg) );
2465 %}
2467 enc_class shift_right_arith_long( eRegL dst, eCXRegI shift ) %{
2468 // TEST shift,32
2469 emit_opcode(cbuf,0xF7);
2470 emit_rm(cbuf, 0x3, 0, ECX_enc);
2471 emit_d32(cbuf,0x20);
2472 // JEQ,s small
2473 emit_opcode(cbuf, 0x74);
2474 emit_d8(cbuf, 0x05);
2475 // MOV $dst.lo,$dst.hi
2476 emit_opcode( cbuf, 0x8B );
2477 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2478 // SAR $dst.hi,31
2479 emit_opcode(cbuf, 0xC1);
2480 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW($dst$$reg) );
2481 emit_d8(cbuf, 0x1F );
2482 // small:
2483 // SHRD $dst.lo,$dst.hi,$shift
2484 emit_opcode(cbuf,0x0F);
2485 emit_opcode(cbuf,0xAD);
2486 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2487 // SAR $dst.hi,$shift"
2488 emit_opcode(cbuf,0xD3);
2489 emit_rm(cbuf, 0x3, 0x7, HIGH_FROM_LOW($dst$$reg) );
2490 %}
2493 // ----------------- Encodings for floating point unit -----------------
2494 // May leave result in FPU-TOS or FPU reg depending on opcodes
2495 enc_class OpcReg_F (regF src) %{ // FMUL, FDIV
2496 $$$emit8$primary;
2497 emit_rm(cbuf, 0x3, $secondary, $src$$reg );
2498 %}
2500 // Pop argument in FPR0 with FSTP ST(0)
2501 enc_class PopFPU() %{
2502 emit_opcode( cbuf, 0xDD );
2503 emit_d8( cbuf, 0xD8 );
2504 %}
2506 // !!!!! equivalent to Pop_Reg_F
2507 enc_class Pop_Reg_D( regD dst ) %{
2508 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2509 emit_d8( cbuf, 0xD8+$dst$$reg );
2510 %}
2512 enc_class Push_Reg_D( regD dst ) %{
2513 emit_opcode( cbuf, 0xD9 );
2514 emit_d8( cbuf, 0xC0-1+$dst$$reg ); // FLD ST(i-1)
2515 %}
2517 enc_class strictfp_bias1( regD dst ) %{
2518 emit_opcode( cbuf, 0xDB ); // FLD m80real
2519 emit_opcode( cbuf, 0x2D );
2520 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias1() );
2521 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2522 emit_opcode( cbuf, 0xC8+$dst$$reg );
2523 %}
2525 enc_class strictfp_bias2( regD dst ) %{
2526 emit_opcode( cbuf, 0xDB ); // FLD m80real
2527 emit_opcode( cbuf, 0x2D );
2528 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias2() );
2529 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2530 emit_opcode( cbuf, 0xC8+$dst$$reg );
2531 %}
2533 // Special case for moving an integer register to a stack slot.
2534 enc_class OpcPRegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2535 store_to_stackslot( cbuf, $primary, $src$$reg, $dst$$disp );
2536 %}
2538 // Special case for moving a register to a stack slot.
2539 enc_class RegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2540 // Opcode already emitted
2541 emit_rm( cbuf, 0x02, $src$$reg, ESP_enc ); // R/M byte
2542 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
2543 emit_d32(cbuf, $dst$$disp); // Displacement
2544 %}
2546 // Push the integer in stackSlot 'src' onto FP-stack
2547 enc_class Push_Mem_I( memory src ) %{ // FILD [ESP+src]
2548 store_to_stackslot( cbuf, $primary, $secondary, $src$$disp );
2549 %}
2551 // Push the float in stackSlot 'src' onto FP-stack
2552 enc_class Push_Mem_F( memory src ) %{ // FLD_S [ESP+src]
2553 store_to_stackslot( cbuf, 0xD9, 0x00, $src$$disp );
2554 %}
2556 // Push the double in stackSlot 'src' onto FP-stack
2557 enc_class Push_Mem_D( memory src ) %{ // FLD_D [ESP+src]
2558 store_to_stackslot( cbuf, 0xDD, 0x00, $src$$disp );
2559 %}
2561 // Push FPU's TOS float to a stack-slot, and pop FPU-stack
2562 enc_class Pop_Mem_F( stackSlotF dst ) %{ // FSTP_S [ESP+dst]
2563 store_to_stackslot( cbuf, 0xD9, 0x03, $dst$$disp );
2564 %}
2566 // Same as Pop_Mem_F except for opcode
2567 // Push FPU's TOS double to a stack-slot, and pop FPU-stack
2568 enc_class Pop_Mem_D( stackSlotD dst ) %{ // FSTP_D [ESP+dst]
2569 store_to_stackslot( cbuf, 0xDD, 0x03, $dst$$disp );
2570 %}
2572 enc_class Pop_Reg_F( regF dst ) %{
2573 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2574 emit_d8( cbuf, 0xD8+$dst$$reg );
2575 %}
2577 enc_class Push_Reg_F( regF dst ) %{
2578 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2579 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2580 %}
2582 // Push FPU's float to a stack-slot, and pop FPU-stack
2583 enc_class Pop_Mem_Reg_F( stackSlotF dst, regF src ) %{
2584 int pop = 0x02;
2585 if ($src$$reg != FPR1L_enc) {
2586 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2587 emit_d8( cbuf, 0xC0-1+$src$$reg );
2588 pop = 0x03;
2589 }
2590 store_to_stackslot( cbuf, 0xD9, pop, $dst$$disp ); // FST<P>_S [ESP+dst]
2591 %}
2593 // Push FPU's double to a stack-slot, and pop FPU-stack
2594 enc_class Pop_Mem_Reg_D( stackSlotD dst, regD src ) %{
2595 int pop = 0x02;
2596 if ($src$$reg != FPR1L_enc) {
2597 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2598 emit_d8( cbuf, 0xC0-1+$src$$reg );
2599 pop = 0x03;
2600 }
2601 store_to_stackslot( cbuf, 0xDD, pop, $dst$$disp ); // FST<P>_D [ESP+dst]
2602 %}
2604 // Push FPU's double to a FPU-stack-slot, and pop FPU-stack
2605 enc_class Pop_Reg_Reg_D( regD dst, regF src ) %{
2606 int pop = 0xD0 - 1; // -1 since we skip FLD
2607 if ($src$$reg != FPR1L_enc) {
2608 emit_opcode( cbuf, 0xD9 ); // FLD ST(src-1)
2609 emit_d8( cbuf, 0xC0-1+$src$$reg );
2610 pop = 0xD8;
2611 }
2612 emit_opcode( cbuf, 0xDD );
2613 emit_d8( cbuf, pop+$dst$$reg ); // FST<P> ST(i)
2614 %}
2617 enc_class Mul_Add_F( regF dst, regF src, regF src1, regF src2 ) %{
2618 MacroAssembler masm(&cbuf);
2619 masm.fld_s( $src1$$reg-1); // nothing at TOS, load TOS from src1.reg
2620 masm.fmul( $src2$$reg+0); // value at TOS
2621 masm.fadd( $src$$reg+0); // value at TOS
2622 masm.fstp_d( $dst$$reg+0); // value at TOS, popped off after store
2623 %}
2626 enc_class Push_Reg_Mod_D( regD dst, regD src) %{
2627 // load dst in FPR0
2628 emit_opcode( cbuf, 0xD9 );
2629 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2630 if ($src$$reg != FPR1L_enc) {
2631 // fincstp
2632 emit_opcode (cbuf, 0xD9);
2633 emit_opcode (cbuf, 0xF7);
2634 // swap src with FPR1:
2635 // FXCH FPR1 with src
2636 emit_opcode(cbuf, 0xD9);
2637 emit_d8(cbuf, 0xC8-1+$src$$reg );
2638 // fdecstp
2639 emit_opcode (cbuf, 0xD9);
2640 emit_opcode (cbuf, 0xF6);
2641 }
2642 %}
2644 enc_class Push_ModD_encoding( regXD src0, regXD src1) %{
2645 // Allocate a word
2646 emit_opcode(cbuf,0x83); // SUB ESP,8
2647 emit_opcode(cbuf,0xEC);
2648 emit_d8(cbuf,0x08);
2650 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src1
2651 emit_opcode (cbuf, 0x0F );
2652 emit_opcode (cbuf, 0x11 );
2653 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2655 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2656 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2658 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src0
2659 emit_opcode (cbuf, 0x0F );
2660 emit_opcode (cbuf, 0x11 );
2661 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2663 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2664 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2666 %}
2668 enc_class Push_ModX_encoding( regX src0, regX src1) %{
2669 // Allocate a word
2670 emit_opcode(cbuf,0x83); // SUB ESP,4
2671 emit_opcode(cbuf,0xEC);
2672 emit_d8(cbuf,0x04);
2674 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src1
2675 emit_opcode (cbuf, 0x0F );
2676 emit_opcode (cbuf, 0x11 );
2677 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2679 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2680 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2682 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src0
2683 emit_opcode (cbuf, 0x0F );
2684 emit_opcode (cbuf, 0x11 );
2685 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2687 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2688 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2690 %}
2692 enc_class Push_ResultXD(regXD dst) %{
2693 store_to_stackslot( cbuf, 0xDD, 0x03, 0 ); //FSTP [ESP]
2695 // UseXmmLoadAndClearUpper ? movsd dst,[esp] : movlpd dst,[esp]
2696 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
2697 emit_opcode (cbuf, 0x0F );
2698 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0x10 : 0x12);
2699 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2701 emit_opcode(cbuf,0x83); // ADD ESP,8
2702 emit_opcode(cbuf,0xC4);
2703 emit_d8(cbuf,0x08);
2704 %}
2706 enc_class Push_ResultX(regX dst, immI d8) %{
2707 store_to_stackslot( cbuf, 0xD9, 0x03, 0 ); //FSTP_S [ESP]
2709 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
2710 emit_opcode (cbuf, 0x0F );
2711 emit_opcode (cbuf, 0x10 );
2712 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2714 emit_opcode(cbuf,0x83); // ADD ESP,d8 (4 or 8)
2715 emit_opcode(cbuf,0xC4);
2716 emit_d8(cbuf,$d8$$constant);
2717 %}
2719 enc_class Push_SrcXD(regXD src) %{
2720 // Allocate a word
2721 emit_opcode(cbuf,0x83); // SUB ESP,8
2722 emit_opcode(cbuf,0xEC);
2723 emit_d8(cbuf,0x08);
2725 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
2726 emit_opcode (cbuf, 0x0F );
2727 emit_opcode (cbuf, 0x11 );
2728 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
2730 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2731 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2732 %}
2734 enc_class push_stack_temp_qword() %{
2735 emit_opcode(cbuf,0x83); // SUB ESP,8
2736 emit_opcode(cbuf,0xEC);
2737 emit_d8 (cbuf,0x08);
2738 %}
2740 enc_class pop_stack_temp_qword() %{
2741 emit_opcode(cbuf,0x83); // ADD ESP,8
2742 emit_opcode(cbuf,0xC4);
2743 emit_d8 (cbuf,0x08);
2744 %}
2746 enc_class push_xmm_to_fpr1( regXD xmm_src ) %{
2747 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], xmm_src
2748 emit_opcode (cbuf, 0x0F );
2749 emit_opcode (cbuf, 0x11 );
2750 encode_RegMem(cbuf, $xmm_src$$reg, ESP_enc, 0x4, 0, 0, false);
2752 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2753 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2754 %}
2756 // Compute X^Y using Intel's fast hardware instructions, if possible.
2757 // Otherwise return a NaN.
2758 enc_class pow_exp_core_encoding %{
2759 // FPR1 holds Y*ln2(X). Compute FPR1 = 2^(Y*ln2(X))
2760 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xC0); // fdup = fld st(0) Q Q
2761 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xFC); // frndint int(Q) Q
2762 emit_opcode(cbuf,0xDC); emit_opcode(cbuf,0xE9); // fsub st(1) -= st(0); int(Q) frac(Q)
2763 emit_opcode(cbuf,0xDB); // FISTP [ESP] frac(Q)
2764 emit_opcode(cbuf,0x1C);
2765 emit_d8(cbuf,0x24);
2766 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xF0); // f2xm1 2^frac(Q)-1
2767 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xE8); // fld1 1 2^frac(Q)-1
2768 emit_opcode(cbuf,0xDE); emit_opcode(cbuf,0xC1); // faddp 2^frac(Q)
2769 emit_opcode(cbuf,0x8B); // mov rax,[esp+0]=int(Q)
2770 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 0, false);
2771 emit_opcode(cbuf,0xC7); // mov rcx,0xFFFFF800 - overflow mask
2772 emit_rm(cbuf, 0x3, 0x0, ECX_enc);
2773 emit_d32(cbuf,0xFFFFF800);
2774 emit_opcode(cbuf,0x81); // add rax,1023 - the double exponent bias
2775 emit_rm(cbuf, 0x3, 0x0, EAX_enc);
2776 emit_d32(cbuf,1023);
2777 emit_opcode(cbuf,0x8B); // mov rbx,eax
2778 emit_rm(cbuf, 0x3, EBX_enc, EAX_enc);
2779 emit_opcode(cbuf,0xC1); // shl rax,20 - Slide to exponent position
2780 emit_rm(cbuf,0x3,0x4,EAX_enc);
2781 emit_d8(cbuf,20);
2782 emit_opcode(cbuf,0x85); // test rbx,ecx - check for overflow
2783 emit_rm(cbuf, 0x3, EBX_enc, ECX_enc);
2784 emit_opcode(cbuf,0x0F); emit_opcode(cbuf,0x45); // CMOVne rax,ecx - overflow; stuff NAN into EAX
2785 emit_rm(cbuf, 0x3, EAX_enc, ECX_enc);
2786 emit_opcode(cbuf,0x89); // mov [esp+4],eax - Store as part of double word
2787 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 4, false);
2788 emit_opcode(cbuf,0xC7); // mov [esp+0],0 - [ESP] = (double)(1<<int(Q)) = 2^int(Q)
2789 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2790 emit_d32(cbuf,0);
2791 emit_opcode(cbuf,0xDC); // fmul dword st(0),[esp+0]; FPR1 = 2^int(Q)*2^frac(Q) = 2^Q
2792 encode_RegMem(cbuf, 0x1, ESP_enc, 0x4, 0, 0, false);
2793 %}
2795 // enc_class Pop_Reg_Mod_D( regD dst, regD src)
2796 // was replaced by Push_Result_Mod_D followed by Pop_Reg_X() or Pop_Mem_X()
2798 enc_class Push_Result_Mod_D( regD src) %{
2799 if ($src$$reg != FPR1L_enc) {
2800 // fincstp
2801 emit_opcode (cbuf, 0xD9);
2802 emit_opcode (cbuf, 0xF7);
2803 // FXCH FPR1 with src
2804 emit_opcode(cbuf, 0xD9);
2805 emit_d8(cbuf, 0xC8-1+$src$$reg );
2806 // fdecstp
2807 emit_opcode (cbuf, 0xD9);
2808 emit_opcode (cbuf, 0xF6);
2809 }
2810 // // following asm replaced with Pop_Reg_F or Pop_Mem_F
2811 // // FSTP FPR$dst$$reg
2812 // emit_opcode( cbuf, 0xDD );
2813 // emit_d8( cbuf, 0xD8+$dst$$reg );
2814 %}
2816 enc_class fnstsw_sahf_skip_parity() %{
2817 // fnstsw ax
2818 emit_opcode( cbuf, 0xDF );
2819 emit_opcode( cbuf, 0xE0 );
2820 // sahf
2821 emit_opcode( cbuf, 0x9E );
2822 // jnp ::skip
2823 emit_opcode( cbuf, 0x7B );
2824 emit_opcode( cbuf, 0x05 );
2825 %}
2827 enc_class emitModD() %{
2828 // fprem must be iterative
2829 // :: loop
2830 // fprem
2831 emit_opcode( cbuf, 0xD9 );
2832 emit_opcode( cbuf, 0xF8 );
2833 // wait
2834 emit_opcode( cbuf, 0x9b );
2835 // fnstsw ax
2836 emit_opcode( cbuf, 0xDF );
2837 emit_opcode( cbuf, 0xE0 );
2838 // sahf
2839 emit_opcode( cbuf, 0x9E );
2840 // jp ::loop
2841 emit_opcode( cbuf, 0x0F );
2842 emit_opcode( cbuf, 0x8A );
2843 emit_opcode( cbuf, 0xF4 );
2844 emit_opcode( cbuf, 0xFF );
2845 emit_opcode( cbuf, 0xFF );
2846 emit_opcode( cbuf, 0xFF );
2847 %}
2849 enc_class fpu_flags() %{
2850 // fnstsw_ax
2851 emit_opcode( cbuf, 0xDF);
2852 emit_opcode( cbuf, 0xE0);
2853 // test ax,0x0400
2854 emit_opcode( cbuf, 0x66 ); // operand-size prefix for 16-bit immediate
2855 emit_opcode( cbuf, 0xA9 );
2856 emit_d16 ( cbuf, 0x0400 );
2857 // // // This sequence works, but stalls for 12-16 cycles on PPro
2858 // // test rax,0x0400
2859 // emit_opcode( cbuf, 0xA9 );
2860 // emit_d32 ( cbuf, 0x00000400 );
2861 //
2862 // jz exit (no unordered comparison)
2863 emit_opcode( cbuf, 0x74 );
2864 emit_d8 ( cbuf, 0x02 );
2865 // mov ah,1 - treat as LT case (set carry flag)
2866 emit_opcode( cbuf, 0xB4 );
2867 emit_d8 ( cbuf, 0x01 );
2868 // sahf
2869 emit_opcode( cbuf, 0x9E);
2870 %}
2872 enc_class cmpF_P6_fixup() %{
2873 // Fixup the integer flags in case comparison involved a NaN
2874 //
2875 // JNP exit (no unordered comparison, P-flag is set by NaN)
2876 emit_opcode( cbuf, 0x7B );
2877 emit_d8 ( cbuf, 0x03 );
2878 // MOV AH,1 - treat as LT case (set carry flag)
2879 emit_opcode( cbuf, 0xB4 );
2880 emit_d8 ( cbuf, 0x01 );
2881 // SAHF
2882 emit_opcode( cbuf, 0x9E);
2883 // NOP // target for branch to avoid branch to branch
2884 emit_opcode( cbuf, 0x90);
2885 %}
2887 // fnstsw_ax();
2888 // sahf();
2889 // movl(dst, nan_result);
2890 // jcc(Assembler::parity, exit);
2891 // movl(dst, less_result);
2892 // jcc(Assembler::below, exit);
2893 // movl(dst, equal_result);
2894 // jcc(Assembler::equal, exit);
2895 // movl(dst, greater_result);
2897 // less_result = 1;
2898 // greater_result = -1;
2899 // equal_result = 0;
2900 // nan_result = -1;
2902 enc_class CmpF_Result(eRegI dst) %{
2903 // fnstsw_ax();
2904 emit_opcode( cbuf, 0xDF);
2905 emit_opcode( cbuf, 0xE0);
2906 // sahf
2907 emit_opcode( cbuf, 0x9E);
2908 // movl(dst, nan_result);
2909 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2910 emit_d32( cbuf, -1 );
2911 // jcc(Assembler::parity, exit);
2912 emit_opcode( cbuf, 0x7A );
2913 emit_d8 ( cbuf, 0x13 );
2914 // movl(dst, less_result);
2915 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2916 emit_d32( cbuf, -1 );
2917 // jcc(Assembler::below, exit);
2918 emit_opcode( cbuf, 0x72 );
2919 emit_d8 ( cbuf, 0x0C );
2920 // movl(dst, equal_result);
2921 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2922 emit_d32( cbuf, 0 );
2923 // jcc(Assembler::equal, exit);
2924 emit_opcode( cbuf, 0x74 );
2925 emit_d8 ( cbuf, 0x05 );
2926 // movl(dst, greater_result);
2927 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2928 emit_d32( cbuf, 1 );
2929 %}
2932 // XMM version of CmpF_Result. Because the XMM compare
2933 // instructions set the EFLAGS directly. It becomes simpler than
2934 // the float version above.
2935 enc_class CmpX_Result(eRegI dst) %{
2936 MacroAssembler _masm(&cbuf);
2937 Label nan, inc, done;
2939 __ jccb(Assembler::parity, nan);
2940 __ jccb(Assembler::equal, done);
2941 __ jccb(Assembler::above, inc);
2942 __ bind(nan);
2943 __ decrement(as_Register($dst$$reg)); // NO L qqq
2944 __ jmpb(done);
2945 __ bind(inc);
2946 __ increment(as_Register($dst$$reg)); // NO L qqq
2947 __ bind(done);
2948 %}
2950 // Compare the longs and set flags
2951 // BROKEN! Do Not use as-is
2952 enc_class cmpl_test( eRegL src1, eRegL src2 ) %{
2953 // CMP $src1.hi,$src2.hi
2954 emit_opcode( cbuf, 0x3B );
2955 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2956 // JNE,s done
2957 emit_opcode(cbuf,0x75);
2958 emit_d8(cbuf, 2 );
2959 // CMP $src1.lo,$src2.lo
2960 emit_opcode( cbuf, 0x3B );
2961 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2962 // done:
2963 %}
2965 enc_class convert_int_long( regL dst, eRegI src ) %{
2966 // mov $dst.lo,$src
2967 int dst_encoding = $dst$$reg;
2968 int src_encoding = $src$$reg;
2969 encode_Copy( cbuf, dst_encoding , src_encoding );
2970 // mov $dst.hi,$src
2971 encode_Copy( cbuf, HIGH_FROM_LOW(dst_encoding), src_encoding );
2972 // sar $dst.hi,31
2973 emit_opcode( cbuf, 0xC1 );
2974 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW(dst_encoding) );
2975 emit_d8(cbuf, 0x1F );
2976 %}
2978 enc_class convert_long_double( eRegL src ) %{
2979 // push $src.hi
2980 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
2981 // push $src.lo
2982 emit_opcode(cbuf, 0x50+$src$$reg );
2983 // fild 64-bits at [SP]
2984 emit_opcode(cbuf,0xdf);
2985 emit_d8(cbuf, 0x6C);
2986 emit_d8(cbuf, 0x24);
2987 emit_d8(cbuf, 0x00);
2988 // pop stack
2989 emit_opcode(cbuf, 0x83); // add SP, #8
2990 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2991 emit_d8(cbuf, 0x8);
2992 %}
2994 enc_class multiply_con_and_shift_high( eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr ) %{
2995 // IMUL EDX:EAX,$src1
2996 emit_opcode( cbuf, 0xF7 );
2997 emit_rm( cbuf, 0x3, 0x5, $src1$$reg );
2998 // SAR EDX,$cnt-32
2999 int shift_count = ((int)$cnt$$constant) - 32;
3000 if (shift_count > 0) {
3001 emit_opcode(cbuf, 0xC1);
3002 emit_rm(cbuf, 0x3, 7, $dst$$reg );
3003 emit_d8(cbuf, shift_count);
3004 }
3005 %}
3007 // this version doesn't have add sp, 8
3008 enc_class convert_long_double2( eRegL src ) %{
3009 // push $src.hi
3010 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
3011 // push $src.lo
3012 emit_opcode(cbuf, 0x50+$src$$reg );
3013 // fild 64-bits at [SP]
3014 emit_opcode(cbuf,0xdf);
3015 emit_d8(cbuf, 0x6C);
3016 emit_d8(cbuf, 0x24);
3017 emit_d8(cbuf, 0x00);
3018 %}
3020 enc_class long_int_multiply( eADXRegL dst, nadxRegI src) %{
3021 // Basic idea: long = (long)int * (long)int
3022 // IMUL EDX:EAX, src
3023 emit_opcode( cbuf, 0xF7 );
3024 emit_rm( cbuf, 0x3, 0x5, $src$$reg);
3025 %}
3027 enc_class long_uint_multiply( eADXRegL dst, nadxRegI src) %{
3028 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
3029 // MUL EDX:EAX, src
3030 emit_opcode( cbuf, 0xF7 );
3031 emit_rm( cbuf, 0x3, 0x4, $src$$reg);
3032 %}
3034 enc_class long_multiply( eADXRegL dst, eRegL src, eRegI tmp ) %{
3035 // Basic idea: lo(result) = lo(x_lo * y_lo)
3036 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
3037 // MOV $tmp,$src.lo
3038 encode_Copy( cbuf, $tmp$$reg, $src$$reg );
3039 // IMUL $tmp,EDX
3040 emit_opcode( cbuf, 0x0F );
3041 emit_opcode( cbuf, 0xAF );
3042 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3043 // MOV EDX,$src.hi
3044 encode_Copy( cbuf, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg) );
3045 // IMUL EDX,EAX
3046 emit_opcode( cbuf, 0x0F );
3047 emit_opcode( cbuf, 0xAF );
3048 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
3049 // ADD $tmp,EDX
3050 emit_opcode( cbuf, 0x03 );
3051 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3052 // MUL EDX:EAX,$src.lo
3053 emit_opcode( cbuf, 0xF7 );
3054 emit_rm( cbuf, 0x3, 0x4, $src$$reg );
3055 // ADD EDX,ESI
3056 emit_opcode( cbuf, 0x03 );
3057 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $tmp$$reg );
3058 %}
3060 enc_class long_multiply_con( eADXRegL dst, immL_127 src, eRegI tmp ) %{
3061 // Basic idea: lo(result) = lo(src * y_lo)
3062 // hi(result) = hi(src * y_lo) + lo(src * y_hi)
3063 // IMUL $tmp,EDX,$src
3064 emit_opcode( cbuf, 0x6B );
3065 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3066 emit_d8( cbuf, (int)$src$$constant );
3067 // MOV EDX,$src
3068 emit_opcode(cbuf, 0xB8 + EDX_enc);
3069 emit_d32( cbuf, (int)$src$$constant );
3070 // MUL EDX:EAX,EDX
3071 emit_opcode( cbuf, 0xF7 );
3072 emit_rm( cbuf, 0x3, 0x4, EDX_enc );
3073 // ADD EDX,ESI
3074 emit_opcode( cbuf, 0x03 );
3075 emit_rm( cbuf, 0x3, EDX_enc, $tmp$$reg );
3076 %}
3078 enc_class long_div( eRegL src1, eRegL src2 ) %{
3079 // PUSH src1.hi
3080 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3081 // PUSH src1.lo
3082 emit_opcode(cbuf, 0x50+$src1$$reg );
3083 // PUSH src2.hi
3084 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3085 // PUSH src2.lo
3086 emit_opcode(cbuf, 0x50+$src2$$reg );
3087 // CALL directly to the runtime
3088 cbuf.set_insts_mark();
3089 emit_opcode(cbuf,0xE8); // Call into runtime
3090 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::ldiv) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3091 // Restore stack
3092 emit_opcode(cbuf, 0x83); // add SP, #framesize
3093 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3094 emit_d8(cbuf, 4*4);
3095 %}
3097 enc_class long_mod( eRegL src1, eRegL src2 ) %{
3098 // PUSH src1.hi
3099 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3100 // PUSH src1.lo
3101 emit_opcode(cbuf, 0x50+$src1$$reg );
3102 // PUSH src2.hi
3103 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3104 // PUSH src2.lo
3105 emit_opcode(cbuf, 0x50+$src2$$reg );
3106 // CALL directly to the runtime
3107 cbuf.set_insts_mark();
3108 emit_opcode(cbuf,0xE8); // Call into runtime
3109 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::lrem ) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3110 // Restore stack
3111 emit_opcode(cbuf, 0x83); // add SP, #framesize
3112 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3113 emit_d8(cbuf, 4*4);
3114 %}
3116 enc_class long_cmp_flags0( eRegL src, eRegI tmp ) %{
3117 // MOV $tmp,$src.lo
3118 emit_opcode(cbuf, 0x8B);
3119 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
3120 // OR $tmp,$src.hi
3121 emit_opcode(cbuf, 0x0B);
3122 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
3123 %}
3125 enc_class long_cmp_flags1( eRegL src1, eRegL src2 ) %{
3126 // CMP $src1.lo,$src2.lo
3127 emit_opcode( cbuf, 0x3B );
3128 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3129 // JNE,s skip
3130 emit_cc(cbuf, 0x70, 0x5);
3131 emit_d8(cbuf,2);
3132 // CMP $src1.hi,$src2.hi
3133 emit_opcode( cbuf, 0x3B );
3134 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
3135 %}
3137 enc_class long_cmp_flags2( eRegL src1, eRegL src2, eRegI tmp ) %{
3138 // CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits
3139 emit_opcode( cbuf, 0x3B );
3140 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3141 // MOV $tmp,$src1.hi
3142 emit_opcode( cbuf, 0x8B );
3143 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src1$$reg) );
3144 // SBB $tmp,$src2.hi\t! Compute flags for long compare
3145 emit_opcode( cbuf, 0x1B );
3146 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src2$$reg) );
3147 %}
3149 enc_class long_cmp_flags3( eRegL src, eRegI tmp ) %{
3150 // XOR $tmp,$tmp
3151 emit_opcode(cbuf,0x33); // XOR
3152 emit_rm(cbuf,0x3, $tmp$$reg, $tmp$$reg);
3153 // CMP $tmp,$src.lo
3154 emit_opcode( cbuf, 0x3B );
3155 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg );
3156 // SBB $tmp,$src.hi
3157 emit_opcode( cbuf, 0x1B );
3158 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg) );
3159 %}
3161 // Sniff, sniff... smells like Gnu Superoptimizer
3162 enc_class neg_long( eRegL dst ) %{
3163 emit_opcode(cbuf,0xF7); // NEG hi
3164 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3165 emit_opcode(cbuf,0xF7); // NEG lo
3166 emit_rm (cbuf,0x3, 0x3, $dst$$reg );
3167 emit_opcode(cbuf,0x83); // SBB hi,0
3168 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3169 emit_d8 (cbuf,0 );
3170 %}
3172 enc_class movq_ld(regXD dst, memory mem) %{
3173 MacroAssembler _masm(&cbuf);
3174 __ movq($dst$$XMMRegister, $mem$$Address);
3175 %}
3177 enc_class movq_st(memory mem, regXD src) %{
3178 MacroAssembler _masm(&cbuf);
3179 __ movq($mem$$Address, $src$$XMMRegister);
3180 %}
3182 enc_class pshufd_8x8(regX dst, regX src) %{
3183 MacroAssembler _masm(&cbuf);
3185 encode_CopyXD(cbuf, $dst$$reg, $src$$reg);
3186 __ punpcklbw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg));
3187 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg), 0x00);
3188 %}
3190 enc_class pshufd_4x16(regX dst, regX src) %{
3191 MacroAssembler _masm(&cbuf);
3193 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), 0x00);
3194 %}
3196 enc_class pshufd(regXD dst, regXD src, int mode) %{
3197 MacroAssembler _masm(&cbuf);
3199 __ pshufd(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), $mode);
3200 %}
3202 enc_class pxor(regXD dst, regXD src) %{
3203 MacroAssembler _masm(&cbuf);
3205 __ pxor(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg));
3206 %}
3208 enc_class mov_i2x(regXD dst, eRegI src) %{
3209 MacroAssembler _masm(&cbuf);
3211 __ movdl(as_XMMRegister($dst$$reg), as_Register($src$$reg));
3212 %}
3215 // Because the transitions from emitted code to the runtime
3216 // monitorenter/exit helper stubs are so slow it's critical that
3217 // we inline both the stack-locking fast-path and the inflated fast path.
3218 //
3219 // See also: cmpFastLock and cmpFastUnlock.
3220 //
3221 // What follows is a specialized inline transliteration of the code
3222 // in slow_enter() and slow_exit(). If we're concerned about I$ bloat
3223 // another option would be to emit TrySlowEnter and TrySlowExit methods
3224 // at startup-time. These methods would accept arguments as
3225 // (rax,=Obj, rbx=Self, rcx=box, rdx=Scratch) and return success-failure
3226 // indications in the icc.ZFlag. Fast_Lock and Fast_Unlock would simply
3227 // marshal the arguments and emit calls to TrySlowEnter and TrySlowExit.
3228 // In practice, however, the # of lock sites is bounded and is usually small.
3229 // Besides the call overhead, TrySlowEnter and TrySlowExit might suffer
3230 // if the processor uses simple bimodal branch predictors keyed by EIP
3231 // Since the helper routines would be called from multiple synchronization
3232 // sites.
3233 //
3234 // An even better approach would be write "MonitorEnter()" and "MonitorExit()"
3235 // in java - using j.u.c and unsafe - and just bind the lock and unlock sites
3236 // to those specialized methods. That'd give us a mostly platform-independent
3237 // implementation that the JITs could optimize and inline at their pleasure.
3238 // Done correctly, the only time we'd need to cross to native could would be
3239 // to park() or unpark() threads. We'd also need a few more unsafe operators
3240 // to (a) prevent compiler-JIT reordering of non-volatile accesses, and
3241 // (b) explicit barriers or fence operations.
3242 //
3243 // TODO:
3244 //
3245 // * Arrange for C2 to pass "Self" into Fast_Lock and Fast_Unlock in one of the registers (scr).
3246 // This avoids manifesting the Self pointer in the Fast_Lock and Fast_Unlock terminals.
3247 // Given TLAB allocation, Self is usually manifested in a register, so passing it into
3248 // the lock operators would typically be faster than reifying Self.
3249 //
3250 // * Ideally I'd define the primitives as:
3251 // fast_lock (nax Obj, nax box, EAX tmp, nax scr) where box, tmp and scr are KILLED.
3252 // fast_unlock (nax Obj, EAX box, nax tmp) where box and tmp are KILLED
3253 // Unfortunately ADLC bugs prevent us from expressing the ideal form.
3254 // Instead, we're stuck with a rather awkward and brittle register assignments below.
3255 // Furthermore the register assignments are overconstrained, possibly resulting in
3256 // sub-optimal code near the synchronization site.
3257 //
3258 // * Eliminate the sp-proximity tests and just use "== Self" tests instead.
3259 // Alternately, use a better sp-proximity test.
3260 //
3261 // * Currently ObjectMonitor._Owner can hold either an sp value or a (THREAD *) value.
3262 // Either one is sufficient to uniquely identify a thread.
3263 // TODO: eliminate use of sp in _owner and use get_thread(tr) instead.
3264 //
3265 // * Intrinsify notify() and notifyAll() for the common cases where the
3266 // object is locked by the calling thread but the waitlist is empty.
3267 // avoid the expensive JNI call to JVM_Notify() and JVM_NotifyAll().
3268 //
3269 // * use jccb and jmpb instead of jcc and jmp to improve code density.
3270 // But beware of excessive branch density on AMD Opterons.
3271 //
3272 // * Both Fast_Lock and Fast_Unlock set the ICC.ZF to indicate success
3273 // or failure of the fast-path. If the fast-path fails then we pass
3274 // control to the slow-path, typically in C. In Fast_Lock and
3275 // Fast_Unlock we often branch to DONE_LABEL, just to find that C2
3276 // will emit a conditional branch immediately after the node.
3277 // So we have branches to branches and lots of ICC.ZF games.
3278 // Instead, it might be better to have C2 pass a "FailureLabel"
3279 // into Fast_Lock and Fast_Unlock. In the case of success, control
3280 // will drop through the node. ICC.ZF is undefined at exit.
3281 // In the case of failure, the node will branch directly to the
3282 // FailureLabel
3285 // obj: object to lock
3286 // box: on-stack box address (displaced header location) - KILLED
3287 // rax,: tmp -- KILLED
3288 // scr: tmp -- KILLED
3289 enc_class Fast_Lock( eRegP obj, eRegP box, eAXRegI tmp, eRegP scr ) %{
3291 Register objReg = as_Register($obj$$reg);
3292 Register boxReg = as_Register($box$$reg);
3293 Register tmpReg = as_Register($tmp$$reg);
3294 Register scrReg = as_Register($scr$$reg);
3296 // Ensure the register assignents are disjoint
3297 guarantee (objReg != boxReg, "") ;
3298 guarantee (objReg != tmpReg, "") ;
3299 guarantee (objReg != scrReg, "") ;
3300 guarantee (boxReg != tmpReg, "") ;
3301 guarantee (boxReg != scrReg, "") ;
3302 guarantee (tmpReg == as_Register(EAX_enc), "") ;
3304 MacroAssembler masm(&cbuf);
3306 if (_counters != NULL) {
3307 masm.atomic_incl(ExternalAddress((address) _counters->total_entry_count_addr()));
3308 }
3309 if (EmitSync & 1) {
3310 // set box->dhw = unused_mark (3)
3311 // Force all sync thru slow-path: slow_enter() and slow_exit()
3312 masm.movptr (Address(boxReg, 0), int32_t(markOopDesc::unused_mark())) ;
3313 masm.cmpptr (rsp, (int32_t)0) ;
3314 } else
3315 if (EmitSync & 2) {
3316 Label DONE_LABEL ;
3317 if (UseBiasedLocking) {
3318 // Note: tmpReg maps to the swap_reg argument and scrReg to the tmp_reg argument.
3319 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3320 }
3322 masm.movptr(tmpReg, Address(objReg, 0)) ; // fetch markword
3323 masm.orptr (tmpReg, 0x1);
3324 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3325 if (os::is_MP()) { masm.lock(); }
3326 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3327 masm.jcc(Assembler::equal, DONE_LABEL);
3328 // Recursive locking
3329 masm.subptr(tmpReg, rsp);
3330 masm.andptr(tmpReg, (int32_t) 0xFFFFF003 );
3331 masm.movptr(Address(boxReg, 0), tmpReg);
3332 masm.bind(DONE_LABEL) ;
3333 } else {
3334 // Possible cases that we'll encounter in fast_lock
3335 // ------------------------------------------------
3336 // * Inflated
3337 // -- unlocked
3338 // -- Locked
3339 // = by self
3340 // = by other
3341 // * biased
3342 // -- by Self
3343 // -- by other
3344 // * neutral
3345 // * stack-locked
3346 // -- by self
3347 // = sp-proximity test hits
3348 // = sp-proximity test generates false-negative
3349 // -- by other
3350 //
3352 Label IsInflated, DONE_LABEL, PopDone ;
3354 // TODO: optimize away redundant LDs of obj->mark and improve the markword triage
3355 // order to reduce the number of conditional branches in the most common cases.
3356 // Beware -- there's a subtle invariant that fetch of the markword
3357 // at [FETCH], below, will never observe a biased encoding (*101b).
3358 // If this invariant is not held we risk exclusion (safety) failure.
3359 if (UseBiasedLocking && !UseOptoBiasInlining) {
3360 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3361 }
3363 masm.movptr(tmpReg, Address(objReg, 0)) ; // [FETCH]
3364 masm.testptr(tmpReg, 0x02) ; // Inflated v (Stack-locked or neutral)
3365 masm.jccb (Assembler::notZero, IsInflated) ;
3367 // Attempt stack-locking ...
3368 masm.orptr (tmpReg, 0x1);
3369 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3370 if (os::is_MP()) { masm.lock(); }
3371 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3372 if (_counters != NULL) {
3373 masm.cond_inc32(Assembler::equal,
3374 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3375 }
3376 masm.jccb (Assembler::equal, DONE_LABEL);
3378 // Recursive locking
3379 masm.subptr(tmpReg, rsp);
3380 masm.andptr(tmpReg, 0xFFFFF003 );
3381 masm.movptr(Address(boxReg, 0), tmpReg);
3382 if (_counters != NULL) {
3383 masm.cond_inc32(Assembler::equal,
3384 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3385 }
3386 masm.jmp (DONE_LABEL) ;
3388 masm.bind (IsInflated) ;
3390 // The object is inflated.
3391 //
3392 // TODO-FIXME: eliminate the ugly use of manifest constants:
3393 // Use markOopDesc::monitor_value instead of "2".
3394 // use markOop::unused_mark() instead of "3".
3395 // The tmpReg value is an objectMonitor reference ORed with
3396 // markOopDesc::monitor_value (2). We can either convert tmpReg to an
3397 // objectmonitor pointer by masking off the "2" bit or we can just
3398 // use tmpReg as an objectmonitor pointer but bias the objectmonitor
3399 // field offsets with "-2" to compensate for and annul the low-order tag bit.
3400 //
3401 // I use the latter as it avoids AGI stalls.
3402 // As such, we write "mov r, [tmpReg+OFFSETOF(Owner)-2]"
3403 // instead of "mov r, [tmpReg+OFFSETOF(Owner)]".
3404 //
3405 #define OFFSET_SKEWED(f) ((ObjectMonitor::f ## _offset_in_bytes())-2)
3407 // boxReg refers to the on-stack BasicLock in the current frame.
3408 // We'd like to write:
3409 // set box->_displaced_header = markOop::unused_mark(). Any non-0 value suffices.
3410 // This is convenient but results a ST-before-CAS penalty. The following CAS suffers
3411 // additional latency as we have another ST in the store buffer that must drain.
3413 if (EmitSync & 8192) {
3414 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3415 masm.get_thread (scrReg) ;
3416 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3417 masm.movptr(tmpReg, NULL_WORD); // consider: xor vs mov
3418 if (os::is_MP()) { masm.lock(); }
3419 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3420 } else
3421 if ((EmitSync & 128) == 0) { // avoid ST-before-CAS
3422 masm.movptr(scrReg, boxReg) ;
3423 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3425 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3426 if ((EmitSync & 2048) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3427 // prefetchw [eax + Offset(_owner)-2]
3428 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3429 }
3431 if ((EmitSync & 64) == 0) {
3432 // Optimistic form: consider XORL tmpReg,tmpReg
3433 masm.movptr(tmpReg, NULL_WORD) ;
3434 } else {
3435 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3436 // Test-And-CAS instead of CAS
3437 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3438 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3439 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3440 }
3442 // Appears unlocked - try to swing _owner from null to non-null.
3443 // Ideally, I'd manifest "Self" with get_thread and then attempt
3444 // to CAS the register containing Self into m->Owner.
3445 // But we don't have enough registers, so instead we can either try to CAS
3446 // rsp or the address of the box (in scr) into &m->owner. If the CAS succeeds
3447 // we later store "Self" into m->Owner. Transiently storing a stack address
3448 // (rsp or the address of the box) into m->owner is harmless.
3449 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3450 if (os::is_MP()) { masm.lock(); }
3451 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3452 masm.movptr(Address(scrReg, 0), 3) ; // box->_displaced_header = 3
3453 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3454 masm.get_thread (scrReg) ; // beware: clobbers ICCs
3455 masm.movptr(Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2), scrReg) ;
3456 masm.xorptr(boxReg, boxReg) ; // set icc.ZFlag = 1 to indicate success
3458 // If the CAS fails we can either retry or pass control to the slow-path.
3459 // We use the latter tactic.
3460 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3461 // If the CAS was successful ...
3462 // Self has acquired the lock
3463 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3464 // Intentional fall-through into DONE_LABEL ...
3465 } else {
3466 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3467 masm.movptr(boxReg, tmpReg) ;
3469 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3470 if ((EmitSync & 2048) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3471 // prefetchw [eax + Offset(_owner)-2]
3472 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3473 }
3475 if ((EmitSync & 64) == 0) {
3476 // Optimistic form
3477 masm.xorptr (tmpReg, tmpReg) ;
3478 } else {
3479 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3480 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3481 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3482 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3483 }
3485 // Appears unlocked - try to swing _owner from null to non-null.
3486 // Use either "Self" (in scr) or rsp as thread identity in _owner.
3487 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3488 masm.get_thread (scrReg) ;
3489 if (os::is_MP()) { masm.lock(); }
3490 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3492 // If the CAS fails we can either retry or pass control to the slow-path.
3493 // We use the latter tactic.
3494 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3495 // If the CAS was successful ...
3496 // Self has acquired the lock
3497 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3498 // Intentional fall-through into DONE_LABEL ...
3499 }
3501 // DONE_LABEL is a hot target - we'd really like to place it at the
3502 // start of cache line by padding with NOPs.
3503 // See the AMD and Intel software optimization manuals for the
3504 // most efficient "long" NOP encodings.
3505 // Unfortunately none of our alignment mechanisms suffice.
3506 masm.bind(DONE_LABEL);
3508 // Avoid branch-to-branch on AMD processors
3509 // This appears to be superstition.
3510 if (EmitSync & 32) masm.nop() ;
3513 // At DONE_LABEL the icc ZFlag is set as follows ...
3514 // Fast_Unlock uses the same protocol.
3515 // ZFlag == 1 -> Success
3516 // ZFlag == 0 -> Failure - force control through the slow-path
3517 }
3518 %}
3520 // obj: object to unlock
3521 // box: box address (displaced header location), killed. Must be EAX.
3522 // rbx,: killed tmp; cannot be obj nor box.
3523 //
3524 // Some commentary on balanced locking:
3525 //
3526 // Fast_Lock and Fast_Unlock are emitted only for provably balanced lock sites.
3527 // Methods that don't have provably balanced locking are forced to run in the
3528 // interpreter - such methods won't be compiled to use fast_lock and fast_unlock.
3529 // The interpreter provides two properties:
3530 // I1: At return-time the interpreter automatically and quietly unlocks any
3531 // objects acquired the current activation (frame). Recall that the
3532 // interpreter maintains an on-stack list of locks currently held by
3533 // a frame.
3534 // I2: If a method attempts to unlock an object that is not held by the
3535 // the frame the interpreter throws IMSX.
3536 //
3537 // Lets say A(), which has provably balanced locking, acquires O and then calls B().
3538 // B() doesn't have provably balanced locking so it runs in the interpreter.
3539 // Control returns to A() and A() unlocks O. By I1 and I2, above, we know that O
3540 // is still locked by A().
3541 //
3542 // The only other source of unbalanced locking would be JNI. The "Java Native Interface:
3543 // Programmer's Guide and Specification" claims that an object locked by jni_monitorenter
3544 // should not be unlocked by "normal" java-level locking and vice-versa. The specification
3545 // doesn't specify what will occur if a program engages in such mixed-mode locking, however.
3547 enc_class Fast_Unlock( nabxRegP obj, eAXRegP box, eRegP tmp) %{
3549 Register objReg = as_Register($obj$$reg);
3550 Register boxReg = as_Register($box$$reg);
3551 Register tmpReg = as_Register($tmp$$reg);
3553 guarantee (objReg != boxReg, "") ;
3554 guarantee (objReg != tmpReg, "") ;
3555 guarantee (boxReg != tmpReg, "") ;
3556 guarantee (boxReg == as_Register(EAX_enc), "") ;
3557 MacroAssembler masm(&cbuf);
3559 if (EmitSync & 4) {
3560 // Disable - inhibit all inlining. Force control through the slow-path
3561 masm.cmpptr (rsp, 0) ;
3562 } else
3563 if (EmitSync & 8) {
3564 Label DONE_LABEL ;
3565 if (UseBiasedLocking) {
3566 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3567 }
3568 // classic stack-locking code ...
3569 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3570 masm.testptr(tmpReg, tmpReg) ;
3571 masm.jcc (Assembler::zero, DONE_LABEL) ;
3572 if (os::is_MP()) { masm.lock(); }
3573 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3574 masm.bind(DONE_LABEL);
3575 } else {
3576 Label DONE_LABEL, Stacked, CheckSucc, Inflated ;
3578 // Critically, the biased locking test must have precedence over
3579 // and appear before the (box->dhw == 0) recursive stack-lock test.
3580 if (UseBiasedLocking && !UseOptoBiasInlining) {
3581 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3582 }
3584 masm.cmpptr(Address(boxReg, 0), 0) ; // Examine the displaced header
3585 masm.movptr(tmpReg, Address(objReg, 0)) ; // Examine the object's markword
3586 masm.jccb (Assembler::zero, DONE_LABEL) ; // 0 indicates recursive stack-lock
3588 masm.testptr(tmpReg, 0x02) ; // Inflated?
3589 masm.jccb (Assembler::zero, Stacked) ;
3591 masm.bind (Inflated) ;
3592 // It's inflated.
3593 // Despite our balanced locking property we still check that m->_owner == Self
3594 // as java routines or native JNI code called by this thread might
3595 // have released the lock.
3596 // Refer to the comments in synchronizer.cpp for how we might encode extra
3597 // state in _succ so we can avoid fetching EntryList|cxq.
3598 //
3599 // I'd like to add more cases in fast_lock() and fast_unlock() --
3600 // such as recursive enter and exit -- but we have to be wary of
3601 // I$ bloat, T$ effects and BP$ effects.
3602 //
3603 // If there's no contention try a 1-0 exit. That is, exit without
3604 // a costly MEMBAR or CAS. See synchronizer.cpp for details on how
3605 // we detect and recover from the race that the 1-0 exit admits.
3606 //
3607 // Conceptually Fast_Unlock() must execute a STST|LDST "release" barrier
3608 // before it STs null into _owner, releasing the lock. Updates
3609 // to data protected by the critical section must be visible before
3610 // we drop the lock (and thus before any other thread could acquire
3611 // the lock and observe the fields protected by the lock).
3612 // IA32's memory-model is SPO, so STs are ordered with respect to
3613 // each other and there's no need for an explicit barrier (fence).
3614 // See also http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
3616 masm.get_thread (boxReg) ;
3617 if ((EmitSync & 4096) && VM_Version::supports_3dnow_prefetch() && os::is_MP()) {
3618 // prefetchw [ebx + Offset(_owner)-2]
3619 masm.prefetchw(Address(rbx, ObjectMonitor::owner_offset_in_bytes()-2));
3620 }
3622 // Note that we could employ various encoding schemes to reduce
3623 // the number of loads below (currently 4) to just 2 or 3.
3624 // Refer to the comments in synchronizer.cpp.
3625 // In practice the chain of fetches doesn't seem to impact performance, however.
3626 if ((EmitSync & 65536) == 0 && (EmitSync & 256)) {
3627 // Attempt to reduce branch density - AMD's branch predictor.
3628 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3629 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3630 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3631 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3632 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3633 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3634 masm.jmpb (DONE_LABEL) ;
3635 } else {
3636 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3637 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3638 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3639 masm.movptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3640 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3641 masm.jccb (Assembler::notZero, CheckSucc) ;
3642 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3643 masm.jmpb (DONE_LABEL) ;
3644 }
3646 // The Following code fragment (EmitSync & 65536) improves the performance of
3647 // contended applications and contended synchronization microbenchmarks.
3648 // Unfortunately the emission of the code - even though not executed - causes regressions
3649 // in scimark and jetstream, evidently because of $ effects. Replacing the code
3650 // with an equal number of never-executed NOPs results in the same regression.
3651 // We leave it off by default.
3653 if ((EmitSync & 65536) != 0) {
3654 Label LSuccess, LGoSlowPath ;
3656 masm.bind (CheckSucc) ;
3658 // Optional pre-test ... it's safe to elide this
3659 if ((EmitSync & 16) == 0) {
3660 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3661 masm.jccb (Assembler::zero, LGoSlowPath) ;
3662 }
3664 // We have a classic Dekker-style idiom:
3665 // ST m->_owner = 0 ; MEMBAR; LD m->_succ
3666 // There are a number of ways to implement the barrier:
3667 // (1) lock:andl &m->_owner, 0
3668 // is fast, but mask doesn't currently support the "ANDL M,IMM32" form.
3669 // LOCK: ANDL [ebx+Offset(_Owner)-2], 0
3670 // Encodes as 81 31 OFF32 IMM32 or 83 63 OFF8 IMM8
3671 // (2) If supported, an explicit MFENCE is appealing.
3672 // In older IA32 processors MFENCE is slower than lock:add or xchg
3673 // particularly if the write-buffer is full as might be the case if
3674 // if stores closely precede the fence or fence-equivalent instruction.
3675 // In more modern implementations MFENCE appears faster, however.
3676 // (3) In lieu of an explicit fence, use lock:addl to the top-of-stack
3677 // The $lines underlying the top-of-stack should be in M-state.
3678 // The locked add instruction is serializing, of course.
3679 // (4) Use xchg, which is serializing
3680 // mov boxReg, 0; xchgl boxReg, [tmpReg + Offset(_owner)-2] also works
3681 // (5) ST m->_owner = 0 and then execute lock:orl &m->_succ, 0.
3682 // The integer condition codes will tell us if succ was 0.
3683 // Since _succ and _owner should reside in the same $line and
3684 // we just stored into _owner, it's likely that the $line
3685 // remains in M-state for the lock:orl.
3686 //
3687 // We currently use (3), although it's likely that switching to (2)
3688 // is correct for the future.
3690 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3691 if (os::is_MP()) {
3692 if (VM_Version::supports_sse2() && 1 == FenceInstruction) {
3693 masm.mfence();
3694 } else {
3695 masm.lock () ; masm.addptr(Address(rsp, 0), 0) ;
3696 }
3697 }
3698 // Ratify _succ remains non-null
3699 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3700 masm.jccb (Assembler::notZero, LSuccess) ;
3702 masm.xorptr(boxReg, boxReg) ; // box is really EAX
3703 if (os::is_MP()) { masm.lock(); }
3704 masm.cmpxchgptr(rsp, Address(tmpReg, ObjectMonitor::owner_offset_in_bytes()-2));
3705 masm.jccb (Assembler::notEqual, LSuccess) ;
3706 // Since we're low on registers we installed rsp as a placeholding in _owner.
3707 // Now install Self over rsp. This is safe as we're transitioning from
3708 // non-null to non=null
3709 masm.get_thread (boxReg) ;
3710 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), boxReg) ;
3711 // Intentional fall-through into LGoSlowPath ...
3713 masm.bind (LGoSlowPath) ;
3714 masm.orptr(boxReg, 1) ; // set ICC.ZF=0 to indicate failure
3715 masm.jmpb (DONE_LABEL) ;
3717 masm.bind (LSuccess) ;
3718 masm.xorptr(boxReg, boxReg) ; // set ICC.ZF=1 to indicate success
3719 masm.jmpb (DONE_LABEL) ;
3720 }
3722 masm.bind (Stacked) ;
3723 // It's not inflated and it's not recursively stack-locked and it's not biased.
3724 // It must be stack-locked.
3725 // Try to reset the header to displaced header.
3726 // The "box" value on the stack is stable, so we can reload
3727 // and be assured we observe the same value as above.
3728 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3729 if (os::is_MP()) { masm.lock(); }
3730 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3731 // Intention fall-thru into DONE_LABEL
3734 // DONE_LABEL is a hot target - we'd really like to place it at the
3735 // start of cache line by padding with NOPs.
3736 // See the AMD and Intel software optimization manuals for the
3737 // most efficient "long" NOP encodings.
3738 // Unfortunately none of our alignment mechanisms suffice.
3739 if ((EmitSync & 65536) == 0) {
3740 masm.bind (CheckSucc) ;
3741 }
3742 masm.bind(DONE_LABEL);
3744 // Avoid branch to branch on AMD processors
3745 if (EmitSync & 32768) { masm.nop() ; }
3746 }
3747 %}
3750 enc_class enc_pop_rdx() %{
3751 emit_opcode(cbuf,0x5A);
3752 %}
3754 enc_class enc_rethrow() %{
3755 cbuf.set_insts_mark();
3756 emit_opcode(cbuf, 0xE9); // jmp entry
3757 emit_d32_reloc(cbuf, (int)OptoRuntime::rethrow_stub() - ((int)cbuf.insts_end())-4,
3758 runtime_call_Relocation::spec(), RELOC_IMM32 );
3759 %}
3762 // Convert a double to an int. Java semantics require we do complex
3763 // manglelations in the corner cases. So we set the rounding mode to
3764 // 'zero', store the darned double down as an int, and reset the
3765 // rounding mode to 'nearest'. The hardware throws an exception which
3766 // patches up the correct value directly to the stack.
3767 enc_class D2I_encoding( regD src ) %{
3768 // Flip to round-to-zero mode. We attempted to allow invalid-op
3769 // exceptions here, so that a NAN or other corner-case value will
3770 // thrown an exception (but normal values get converted at full speed).
3771 // However, I2C adapters and other float-stack manglers leave pending
3772 // invalid-op exceptions hanging. We would have to clear them before
3773 // enabling them and that is more expensive than just testing for the
3774 // invalid value Intel stores down in the corner cases.
3775 emit_opcode(cbuf,0xD9); // FLDCW trunc
3776 emit_opcode(cbuf,0x2D);
3777 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3778 // Allocate a word
3779 emit_opcode(cbuf,0x83); // SUB ESP,4
3780 emit_opcode(cbuf,0xEC);
3781 emit_d8(cbuf,0x04);
3782 // Encoding assumes a double has been pushed into FPR0.
3783 // Store down the double as an int, popping the FPU stack
3784 emit_opcode(cbuf,0xDB); // FISTP [ESP]
3785 emit_opcode(cbuf,0x1C);
3786 emit_d8(cbuf,0x24);
3787 // Restore the rounding mode; mask the exception
3788 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3789 emit_opcode(cbuf,0x2D);
3790 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3791 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3792 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3794 // Load the converted int; adjust CPU stack
3795 emit_opcode(cbuf,0x58); // POP EAX
3796 emit_opcode(cbuf,0x3D); // CMP EAX,imm
3797 emit_d32 (cbuf,0x80000000); // 0x80000000
3798 emit_opcode(cbuf,0x75); // JNE around_slow_call
3799 emit_d8 (cbuf,0x07); // Size of slow_call
3800 // Push src onto stack slow-path
3801 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3802 emit_d8 (cbuf,0xC0-1+$src$$reg );
3803 // CALL directly to the runtime
3804 cbuf.set_insts_mark();
3805 emit_opcode(cbuf,0xE8); // Call into runtime
3806 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3807 // Carry on here...
3808 %}
3810 enc_class D2L_encoding( regD src ) %{
3811 emit_opcode(cbuf,0xD9); // FLDCW trunc
3812 emit_opcode(cbuf,0x2D);
3813 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3814 // Allocate a word
3815 emit_opcode(cbuf,0x83); // SUB ESP,8
3816 emit_opcode(cbuf,0xEC);
3817 emit_d8(cbuf,0x08);
3818 // Encoding assumes a double has been pushed into FPR0.
3819 // Store down the double as a long, popping the FPU stack
3820 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3821 emit_opcode(cbuf,0x3C);
3822 emit_d8(cbuf,0x24);
3823 // Restore the rounding mode; mask the exception
3824 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3825 emit_opcode(cbuf,0x2D);
3826 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3827 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3828 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3830 // Load the converted int; adjust CPU stack
3831 emit_opcode(cbuf,0x58); // POP EAX
3832 emit_opcode(cbuf,0x5A); // POP EDX
3833 emit_opcode(cbuf,0x81); // CMP EDX,imm
3834 emit_d8 (cbuf,0xFA); // rdx
3835 emit_d32 (cbuf,0x80000000); // 0x80000000
3836 emit_opcode(cbuf,0x75); // JNE around_slow_call
3837 emit_d8 (cbuf,0x07+4); // Size of slow_call
3838 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3839 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3840 emit_opcode(cbuf,0x75); // JNE around_slow_call
3841 emit_d8 (cbuf,0x07); // Size of slow_call
3842 // Push src onto stack slow-path
3843 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3844 emit_d8 (cbuf,0xC0-1+$src$$reg );
3845 // CALL directly to the runtime
3846 cbuf.set_insts_mark();
3847 emit_opcode(cbuf,0xE8); // Call into runtime
3848 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3849 // Carry on here...
3850 %}
3852 enc_class X2L_encoding( regX src ) %{
3853 // Allocate a word
3854 emit_opcode(cbuf,0x83); // SUB ESP,8
3855 emit_opcode(cbuf,0xEC);
3856 emit_d8(cbuf,0x08);
3858 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3859 emit_opcode (cbuf, 0x0F );
3860 emit_opcode (cbuf, 0x11 );
3861 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3863 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3864 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3866 emit_opcode(cbuf,0xD9); // FLDCW trunc
3867 emit_opcode(cbuf,0x2D);
3868 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3870 // Encoding assumes a double has been pushed into FPR0.
3871 // Store down the double as a long, popping the FPU stack
3872 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3873 emit_opcode(cbuf,0x3C);
3874 emit_d8(cbuf,0x24);
3876 // Restore the rounding mode; mask the exception
3877 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3878 emit_opcode(cbuf,0x2D);
3879 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3880 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3881 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3883 // Load the converted int; adjust CPU stack
3884 emit_opcode(cbuf,0x58); // POP EAX
3886 emit_opcode(cbuf,0x5A); // POP EDX
3888 emit_opcode(cbuf,0x81); // CMP EDX,imm
3889 emit_d8 (cbuf,0xFA); // rdx
3890 emit_d32 (cbuf,0x80000000);// 0x80000000
3892 emit_opcode(cbuf,0x75); // JNE around_slow_call
3893 emit_d8 (cbuf,0x13+4); // Size of slow_call
3895 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3896 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3898 emit_opcode(cbuf,0x75); // JNE around_slow_call
3899 emit_d8 (cbuf,0x13); // Size of slow_call
3901 // Allocate a word
3902 emit_opcode(cbuf,0x83); // SUB ESP,4
3903 emit_opcode(cbuf,0xEC);
3904 emit_d8(cbuf,0x04);
3906 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3907 emit_opcode (cbuf, 0x0F );
3908 emit_opcode (cbuf, 0x11 );
3909 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3911 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3912 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3914 emit_opcode(cbuf,0x83); // ADD ESP,4
3915 emit_opcode(cbuf,0xC4);
3916 emit_d8(cbuf,0x04);
3918 // CALL directly to the runtime
3919 cbuf.set_insts_mark();
3920 emit_opcode(cbuf,0xE8); // Call into runtime
3921 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3922 // Carry on here...
3923 %}
3925 enc_class XD2L_encoding( regXD src ) %{
3926 // Allocate a word
3927 emit_opcode(cbuf,0x83); // SUB ESP,8
3928 emit_opcode(cbuf,0xEC);
3929 emit_d8(cbuf,0x08);
3931 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
3932 emit_opcode (cbuf, 0x0F );
3933 emit_opcode (cbuf, 0x11 );
3934 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3936 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
3937 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3939 emit_opcode(cbuf,0xD9); // FLDCW trunc
3940 emit_opcode(cbuf,0x2D);
3941 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3943 // Encoding assumes a double has been pushed into FPR0.
3944 // Store down the double as a long, popping the FPU stack
3945 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3946 emit_opcode(cbuf,0x3C);
3947 emit_d8(cbuf,0x24);
3949 // Restore the rounding mode; mask the exception
3950 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3951 emit_opcode(cbuf,0x2D);
3952 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3953 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3954 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3956 // Load the converted int; adjust CPU stack
3957 emit_opcode(cbuf,0x58); // POP EAX
3959 emit_opcode(cbuf,0x5A); // POP EDX
3961 emit_opcode(cbuf,0x81); // CMP EDX,imm
3962 emit_d8 (cbuf,0xFA); // rdx
3963 emit_d32 (cbuf,0x80000000); // 0x80000000
3965 emit_opcode(cbuf,0x75); // JNE around_slow_call
3966 emit_d8 (cbuf,0x13+4); // Size of slow_call
3968 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3969 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3971 emit_opcode(cbuf,0x75); // JNE around_slow_call
3972 emit_d8 (cbuf,0x13); // Size of slow_call
3974 // Push src onto stack slow-path
3975 // Allocate a word
3976 emit_opcode(cbuf,0x83); // SUB ESP,8
3977 emit_opcode(cbuf,0xEC);
3978 emit_d8(cbuf,0x08);
3980 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
3981 emit_opcode (cbuf, 0x0F );
3982 emit_opcode (cbuf, 0x11 );
3983 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3985 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
3986 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3988 emit_opcode(cbuf,0x83); // ADD ESP,8
3989 emit_opcode(cbuf,0xC4);
3990 emit_d8(cbuf,0x08);
3992 // CALL directly to the runtime
3993 cbuf.set_insts_mark();
3994 emit_opcode(cbuf,0xE8); // Call into runtime
3995 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3996 // Carry on here...
3997 %}
3999 enc_class D2X_encoding( regX dst, regD src ) %{
4000 // Allocate a word
4001 emit_opcode(cbuf,0x83); // SUB ESP,4
4002 emit_opcode(cbuf,0xEC);
4003 emit_d8(cbuf,0x04);
4004 int pop = 0x02;
4005 if ($src$$reg != FPR1L_enc) {
4006 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
4007 emit_d8( cbuf, 0xC0-1+$src$$reg );
4008 pop = 0x03;
4009 }
4010 store_to_stackslot( cbuf, 0xD9, pop, 0 ); // FST<P>_S [ESP]
4012 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
4013 emit_opcode (cbuf, 0x0F );
4014 emit_opcode (cbuf, 0x10 );
4015 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
4017 emit_opcode(cbuf,0x83); // ADD ESP,4
4018 emit_opcode(cbuf,0xC4);
4019 emit_d8(cbuf,0x04);
4020 // Carry on here...
4021 %}
4023 enc_class FX2I_encoding( regX src, eRegI dst ) %{
4024 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
4026 // Compare the result to see if we need to go to the slow path
4027 emit_opcode(cbuf,0x81); // CMP dst,imm
4028 emit_rm (cbuf,0x3,0x7,$dst$$reg);
4029 emit_d32 (cbuf,0x80000000); // 0x80000000
4031 emit_opcode(cbuf,0x75); // JNE around_slow_call
4032 emit_d8 (cbuf,0x13); // Size of slow_call
4033 // Store xmm to a temp memory
4034 // location and push it onto stack.
4036 emit_opcode(cbuf,0x83); // SUB ESP,4
4037 emit_opcode(cbuf,0xEC);
4038 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4040 emit_opcode (cbuf, $primary ? 0xF2 : 0xF3 ); // MOVSS [ESP], xmm
4041 emit_opcode (cbuf, 0x0F );
4042 emit_opcode (cbuf, 0x11 );
4043 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4045 emit_opcode(cbuf, $primary ? 0xDD : 0xD9 ); // FLD [ESP]
4046 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4048 emit_opcode(cbuf,0x83); // ADD ESP,4
4049 emit_opcode(cbuf,0xC4);
4050 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4052 // CALL directly to the runtime
4053 cbuf.set_insts_mark();
4054 emit_opcode(cbuf,0xE8); // Call into runtime
4055 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
4057 // Carry on here...
4058 %}
4060 enc_class X2D_encoding( regD dst, regX src ) %{
4061 // Allocate a word
4062 emit_opcode(cbuf,0x83); // SUB ESP,4
4063 emit_opcode(cbuf,0xEC);
4064 emit_d8(cbuf,0x04);
4066 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], xmm
4067 emit_opcode (cbuf, 0x0F );
4068 emit_opcode (cbuf, 0x11 );
4069 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4071 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
4072 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4074 emit_opcode(cbuf,0x83); // ADD ESP,4
4075 emit_opcode(cbuf,0xC4);
4076 emit_d8(cbuf,0x04);
4078 // Carry on here...
4079 %}
4081 enc_class AbsXF_encoding(regX dst) %{
4082 address signmask_address=(address)float_signmask_pool;
4083 // andpd:\tANDPS $dst,[signconst]
4084 emit_opcode(cbuf, 0x0F);
4085 emit_opcode(cbuf, 0x54);
4086 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4087 emit_d32(cbuf, (int)signmask_address);
4088 %}
4090 enc_class AbsXD_encoding(regXD dst) %{
4091 address signmask_address=(address)double_signmask_pool;
4092 // andpd:\tANDPD $dst,[signconst]
4093 emit_opcode(cbuf, 0x66);
4094 emit_opcode(cbuf, 0x0F);
4095 emit_opcode(cbuf, 0x54);
4096 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4097 emit_d32(cbuf, (int)signmask_address);
4098 %}
4100 enc_class NegXF_encoding(regX dst) %{
4101 address signmask_address=(address)float_signflip_pool;
4102 // andpd:\tXORPS $dst,[signconst]
4103 emit_opcode(cbuf, 0x0F);
4104 emit_opcode(cbuf, 0x57);
4105 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4106 emit_d32(cbuf, (int)signmask_address);
4107 %}
4109 enc_class NegXD_encoding(regXD dst) %{
4110 address signmask_address=(address)double_signflip_pool;
4111 // andpd:\tXORPD $dst,[signconst]
4112 emit_opcode(cbuf, 0x66);
4113 emit_opcode(cbuf, 0x0F);
4114 emit_opcode(cbuf, 0x57);
4115 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4116 emit_d32(cbuf, (int)signmask_address);
4117 %}
4119 enc_class FMul_ST_reg( eRegF src1 ) %{
4120 // Operand was loaded from memory into fp ST (stack top)
4121 // FMUL ST,$src /* D8 C8+i */
4122 emit_opcode(cbuf, 0xD8);
4123 emit_opcode(cbuf, 0xC8 + $src1$$reg);
4124 %}
4126 enc_class FAdd_ST_reg( eRegF src2 ) %{
4127 // FADDP ST,src2 /* D8 C0+i */
4128 emit_opcode(cbuf, 0xD8);
4129 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4130 //could use FADDP src2,fpST /* DE C0+i */
4131 %}
4133 enc_class FAddP_reg_ST( eRegF src2 ) %{
4134 // FADDP src2,ST /* DE C0+i */
4135 emit_opcode(cbuf, 0xDE);
4136 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4137 %}
4139 enc_class subF_divF_encode( eRegF src1, eRegF src2) %{
4140 // Operand has been loaded into fp ST (stack top)
4141 // FSUB ST,$src1
4142 emit_opcode(cbuf, 0xD8);
4143 emit_opcode(cbuf, 0xE0 + $src1$$reg);
4145 // FDIV
4146 emit_opcode(cbuf, 0xD8);
4147 emit_opcode(cbuf, 0xF0 + $src2$$reg);
4148 %}
4150 enc_class MulFAddF (eRegF src1, eRegF src2) %{
4151 // Operand was loaded from memory into fp ST (stack top)
4152 // FADD ST,$src /* D8 C0+i */
4153 emit_opcode(cbuf, 0xD8);
4154 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4156 // FMUL ST,src2 /* D8 C*+i */
4157 emit_opcode(cbuf, 0xD8);
4158 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4159 %}
4162 enc_class MulFAddFreverse (eRegF src1, eRegF src2) %{
4163 // Operand was loaded from memory into fp ST (stack top)
4164 // FADD ST,$src /* D8 C0+i */
4165 emit_opcode(cbuf, 0xD8);
4166 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4168 // FMULP src2,ST /* DE C8+i */
4169 emit_opcode(cbuf, 0xDE);
4170 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4171 %}
4173 // Atomically load the volatile long
4174 enc_class enc_loadL_volatile( memory mem, stackSlotL dst ) %{
4175 emit_opcode(cbuf,0xDF);
4176 int rm_byte_opcode = 0x05;
4177 int base = $mem$$base;
4178 int index = $mem$$index;
4179 int scale = $mem$$scale;
4180 int displace = $mem$$disp;
4181 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4182 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4183 store_to_stackslot( cbuf, 0x0DF, 0x07, $dst$$disp );
4184 %}
4186 enc_class enc_loadLX_volatile( memory mem, stackSlotL dst, regXD tmp ) %{
4187 { // Atomic long load
4188 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4189 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4190 emit_opcode(cbuf,0x0F);
4191 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4192 int base = $mem$$base;
4193 int index = $mem$$index;
4194 int scale = $mem$$scale;
4195 int displace = $mem$$disp;
4196 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4197 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4198 }
4199 { // MOVSD $dst,$tmp ! atomic long store
4200 emit_opcode(cbuf,0xF2);
4201 emit_opcode(cbuf,0x0F);
4202 emit_opcode(cbuf,0x11);
4203 int base = $dst$$base;
4204 int index = $dst$$index;
4205 int scale = $dst$$scale;
4206 int displace = $dst$$disp;
4207 bool disp_is_oop = $dst->disp_is_oop(); // disp-as-oop when working with static globals
4208 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4209 }
4210 %}
4212 enc_class enc_loadLX_reg_volatile( memory mem, eRegL dst, regXD tmp ) %{
4213 { // Atomic long load
4214 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4215 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4216 emit_opcode(cbuf,0x0F);
4217 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4218 int base = $mem$$base;
4219 int index = $mem$$index;
4220 int scale = $mem$$scale;
4221 int displace = $mem$$disp;
4222 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4223 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4224 }
4225 { // MOVD $dst.lo,$tmp
4226 emit_opcode(cbuf,0x66);
4227 emit_opcode(cbuf,0x0F);
4228 emit_opcode(cbuf,0x7E);
4229 emit_rm(cbuf, 0x3, $tmp$$reg, $dst$$reg);
4230 }
4231 { // PSRLQ $tmp,32
4232 emit_opcode(cbuf,0x66);
4233 emit_opcode(cbuf,0x0F);
4234 emit_opcode(cbuf,0x73);
4235 emit_rm(cbuf, 0x3, 0x02, $tmp$$reg);
4236 emit_d8(cbuf, 0x20);
4237 }
4238 { // MOVD $dst.hi,$tmp
4239 emit_opcode(cbuf,0x66);
4240 emit_opcode(cbuf,0x0F);
4241 emit_opcode(cbuf,0x7E);
4242 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
4243 }
4244 %}
4246 // Volatile Store Long. Must be atomic, so move it into
4247 // the FP TOS and then do a 64-bit FIST. Has to probe the
4248 // target address before the store (for null-ptr checks)
4249 // so the memory operand is used twice in the encoding.
4250 enc_class enc_storeL_volatile( memory mem, stackSlotL src ) %{
4251 store_to_stackslot( cbuf, 0x0DF, 0x05, $src$$disp );
4252 cbuf.set_insts_mark(); // Mark start of FIST in case $mem has an oop
4253 emit_opcode(cbuf,0xDF);
4254 int rm_byte_opcode = 0x07;
4255 int base = $mem$$base;
4256 int index = $mem$$index;
4257 int scale = $mem$$scale;
4258 int displace = $mem$$disp;
4259 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4260 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4261 %}
4263 enc_class enc_storeLX_volatile( memory mem, stackSlotL src, regXD tmp) %{
4264 { // Atomic long load
4265 // UseXmmLoadAndClearUpper ? movsd $tmp,[$src] : movlpd $tmp,[$src]
4266 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4267 emit_opcode(cbuf,0x0F);
4268 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4269 int base = $src$$base;
4270 int index = $src$$index;
4271 int scale = $src$$scale;
4272 int displace = $src$$disp;
4273 bool disp_is_oop = $src->disp_is_oop(); // disp-as-oop when working with static globals
4274 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4275 }
4276 cbuf.set_insts_mark(); // Mark start of MOVSD in case $mem has an oop
4277 { // MOVSD $mem,$tmp ! atomic long store
4278 emit_opcode(cbuf,0xF2);
4279 emit_opcode(cbuf,0x0F);
4280 emit_opcode(cbuf,0x11);
4281 int base = $mem$$base;
4282 int index = $mem$$index;
4283 int scale = $mem$$scale;
4284 int displace = $mem$$disp;
4285 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4286 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4287 }
4288 %}
4290 enc_class enc_storeLX_reg_volatile( memory mem, eRegL src, regXD tmp, regXD tmp2) %{
4291 { // MOVD $tmp,$src.lo
4292 emit_opcode(cbuf,0x66);
4293 emit_opcode(cbuf,0x0F);
4294 emit_opcode(cbuf,0x6E);
4295 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
4296 }
4297 { // MOVD $tmp2,$src.hi
4298 emit_opcode(cbuf,0x66);
4299 emit_opcode(cbuf,0x0F);
4300 emit_opcode(cbuf,0x6E);
4301 emit_rm(cbuf, 0x3, $tmp2$$reg, HIGH_FROM_LOW($src$$reg));
4302 }
4303 { // PUNPCKLDQ $tmp,$tmp2
4304 emit_opcode(cbuf,0x66);
4305 emit_opcode(cbuf,0x0F);
4306 emit_opcode(cbuf,0x62);
4307 emit_rm(cbuf, 0x3, $tmp$$reg, $tmp2$$reg);
4308 }
4309 cbuf.set_insts_mark(); // Mark start of MOVSD in case $mem has an oop
4310 { // MOVSD $mem,$tmp ! atomic long store
4311 emit_opcode(cbuf,0xF2);
4312 emit_opcode(cbuf,0x0F);
4313 emit_opcode(cbuf,0x11);
4314 int base = $mem$$base;
4315 int index = $mem$$index;
4316 int scale = $mem$$scale;
4317 int displace = $mem$$disp;
4318 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4319 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4320 }
4321 %}
4323 // Safepoint Poll. This polls the safepoint page, and causes an
4324 // exception if it is not readable. Unfortunately, it kills the condition code
4325 // in the process
4326 // We current use TESTL [spp],EDI
4327 // A better choice might be TESTB [spp + pagesize() - CacheLineSize()],0
4329 enc_class Safepoint_Poll() %{
4330 cbuf.relocate(cbuf.insts_mark(), relocInfo::poll_type, 0);
4331 emit_opcode(cbuf,0x85);
4332 emit_rm (cbuf, 0x0, 0x7, 0x5);
4333 emit_d32(cbuf, (intptr_t)os::get_polling_page());
4334 %}
4335 %}
4338 //----------FRAME--------------------------------------------------------------
4339 // Definition of frame structure and management information.
4340 //
4341 // S T A C K L A Y O U T Allocators stack-slot number
4342 // | (to get allocators register number
4343 // G Owned by | | v add OptoReg::stack0())
4344 // r CALLER | |
4345 // o | +--------+ pad to even-align allocators stack-slot
4346 // w V | pad0 | numbers; owned by CALLER
4347 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned
4348 // h ^ | in | 5
4349 // | | args | 4 Holes in incoming args owned by SELF
4350 // | | | | 3
4351 // | | +--------+
4352 // V | | old out| Empty on Intel, window on Sparc
4353 // | old |preserve| Must be even aligned.
4354 // | SP-+--------+----> Matcher::_old_SP, even aligned
4355 // | | in | 3 area for Intel ret address
4356 // Owned by |preserve| Empty on Sparc.
4357 // SELF +--------+
4358 // | | pad2 | 2 pad to align old SP
4359 // | +--------+ 1
4360 // | | locks | 0
4361 // | +--------+----> OptoReg::stack0(), even aligned
4362 // | | pad1 | 11 pad to align new SP
4363 // | +--------+
4364 // | | | 10
4365 // | | spills | 9 spills
4366 // V | | 8 (pad0 slot for callee)
4367 // -----------+--------+----> Matcher::_out_arg_limit, unaligned
4368 // ^ | out | 7
4369 // | | args | 6 Holes in outgoing args owned by CALLEE
4370 // Owned by +--------+
4371 // CALLEE | new out| 6 Empty on Intel, window on Sparc
4372 // | new |preserve| Must be even-aligned.
4373 // | SP-+--------+----> Matcher::_new_SP, even aligned
4374 // | | |
4375 //
4376 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is
4377 // known from SELF's arguments and the Java calling convention.
4378 // Region 6-7 is determined per call site.
4379 // Note 2: If the calling convention leaves holes in the incoming argument
4380 // area, those holes are owned by SELF. Holes in the outgoing area
4381 // are owned by the CALLEE. Holes should not be nessecary in the
4382 // incoming area, as the Java calling convention is completely under
4383 // the control of the AD file. Doubles can be sorted and packed to
4384 // avoid holes. Holes in the outgoing arguments may be nessecary for
4385 // varargs C calling conventions.
4386 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is
4387 // even aligned with pad0 as needed.
4388 // Region 6 is even aligned. Region 6-7 is NOT even aligned;
4389 // region 6-11 is even aligned; it may be padded out more so that
4390 // the region from SP to FP meets the minimum stack alignment.
4392 frame %{
4393 // What direction does stack grow in (assumed to be same for C & Java)
4394 stack_direction(TOWARDS_LOW);
4396 // These three registers define part of the calling convention
4397 // between compiled code and the interpreter.
4398 inline_cache_reg(EAX); // Inline Cache Register
4399 interpreter_method_oop_reg(EBX); // Method Oop Register when calling interpreter
4401 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset]
4402 cisc_spilling_operand_name(indOffset32);
4404 // Number of stack slots consumed by locking an object
4405 sync_stack_slots(1);
4407 // Compiled code's Frame Pointer
4408 frame_pointer(ESP);
4409 // Interpreter stores its frame pointer in a register which is
4410 // stored to the stack by I2CAdaptors.
4411 // I2CAdaptors convert from interpreted java to compiled java.
4412 interpreter_frame_pointer(EBP);
4414 // Stack alignment requirement
4415 // Alignment size in bytes (128-bit -> 16 bytes)
4416 stack_alignment(StackAlignmentInBytes);
4418 // Number of stack slots between incoming argument block and the start of
4419 // a new frame. The PROLOG must add this many slots to the stack. The
4420 // EPILOG must remove this many slots. Intel needs one slot for
4421 // return address and one for rbp, (must save rbp)
4422 in_preserve_stack_slots(2+VerifyStackAtCalls);
4424 // Number of outgoing stack slots killed above the out_preserve_stack_slots
4425 // for calls to C. Supports the var-args backing area for register parms.
4426 varargs_C_out_slots_killed(0);
4428 // The after-PROLOG location of the return address. Location of
4429 // return address specifies a type (REG or STACK) and a number
4430 // representing the register number (i.e. - use a register name) or
4431 // stack slot.
4432 // Ret Addr is on stack in slot 0 if no locks or verification or alignment.
4433 // Otherwise, it is above the locks and verification slot and alignment word
4434 return_addr(STACK - 1 +
4435 round_to(1+VerifyStackAtCalls+
4436 Compile::current()->fixed_slots(),
4437 (StackAlignmentInBytes/wordSize)));
4439 // Body of function which returns an integer array locating
4440 // arguments either in registers or in stack slots. Passed an array
4441 // of ideal registers called "sig" and a "length" count. Stack-slot
4442 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4443 // arguments for a CALLEE. Incoming stack arguments are
4444 // automatically biased by the preserve_stack_slots field above.
4445 calling_convention %{
4446 // No difference between ingoing/outgoing just pass false
4447 SharedRuntime::java_calling_convention(sig_bt, regs, length, false);
4448 %}
4451 // Body of function which returns an integer array locating
4452 // arguments either in registers or in stack slots. Passed an array
4453 // of ideal registers called "sig" and a "length" count. Stack-slot
4454 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4455 // arguments for a CALLEE. Incoming stack arguments are
4456 // automatically biased by the preserve_stack_slots field above.
4457 c_calling_convention %{
4458 // This is obviously always outgoing
4459 (void) SharedRuntime::c_calling_convention(sig_bt, regs, length);
4460 %}
4462 // Location of C & interpreter return values
4463 c_return_value %{
4464 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4465 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4466 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4468 // in SSE2+ mode we want to keep the FPU stack clean so pretend
4469 // that C functions return float and double results in XMM0.
4470 if( ideal_reg == Op_RegD && UseSSE>=2 )
4471 return OptoRegPair(XMM0b_num,XMM0a_num);
4472 if( ideal_reg == Op_RegF && UseSSE>=2 )
4473 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4475 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4476 %}
4478 // Location of return values
4479 return_value %{
4480 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4481 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4482 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4483 if( ideal_reg == Op_RegD && UseSSE>=2 )
4484 return OptoRegPair(XMM0b_num,XMM0a_num);
4485 if( ideal_reg == Op_RegF && UseSSE>=1 )
4486 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4487 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4488 %}
4490 %}
4492 //----------ATTRIBUTES---------------------------------------------------------
4493 //----------Operand Attributes-------------------------------------------------
4494 op_attrib op_cost(0); // Required cost attribute
4496 //----------Instruction Attributes---------------------------------------------
4497 ins_attrib ins_cost(100); // Required cost attribute
4498 ins_attrib ins_size(8); // Required size attribute (in bits)
4499 ins_attrib ins_short_branch(0); // Required flag: is this instruction a
4500 // non-matching short branch variant of some
4501 // long branch?
4502 ins_attrib ins_alignment(1); // Required alignment attribute (must be a power of 2)
4503 // specifies the alignment that some part of the instruction (not
4504 // necessarily the start) requires. If > 1, a compute_padding()
4505 // function must be provided for the instruction
4507 //----------OPERANDS-----------------------------------------------------------
4508 // Operand definitions must precede instruction definitions for correct parsing
4509 // in the ADLC because operands constitute user defined types which are used in
4510 // instruction definitions.
4512 //----------Simple Operands----------------------------------------------------
4513 // Immediate Operands
4514 // Integer Immediate
4515 operand immI() %{
4516 match(ConI);
4518 op_cost(10);
4519 format %{ %}
4520 interface(CONST_INTER);
4521 %}
4523 // Constant for test vs zero
4524 operand immI0() %{
4525 predicate(n->get_int() == 0);
4526 match(ConI);
4528 op_cost(0);
4529 format %{ %}
4530 interface(CONST_INTER);
4531 %}
4533 // Constant for increment
4534 operand immI1() %{
4535 predicate(n->get_int() == 1);
4536 match(ConI);
4538 op_cost(0);
4539 format %{ %}
4540 interface(CONST_INTER);
4541 %}
4543 // Constant for decrement
4544 operand immI_M1() %{
4545 predicate(n->get_int() == -1);
4546 match(ConI);
4548 op_cost(0);
4549 format %{ %}
4550 interface(CONST_INTER);
4551 %}
4553 // Valid scale values for addressing modes
4554 operand immI2() %{
4555 predicate(0 <= n->get_int() && (n->get_int() <= 3));
4556 match(ConI);
4558 format %{ %}
4559 interface(CONST_INTER);
4560 %}
4562 operand immI8() %{
4563 predicate((-128 <= n->get_int()) && (n->get_int() <= 127));
4564 match(ConI);
4566 op_cost(5);
4567 format %{ %}
4568 interface(CONST_INTER);
4569 %}
4571 operand immI16() %{
4572 predicate((-32768 <= n->get_int()) && (n->get_int() <= 32767));
4573 match(ConI);
4575 op_cost(10);
4576 format %{ %}
4577 interface(CONST_INTER);
4578 %}
4580 // Constant for long shifts
4581 operand immI_32() %{
4582 predicate( n->get_int() == 32 );
4583 match(ConI);
4585 op_cost(0);
4586 format %{ %}
4587 interface(CONST_INTER);
4588 %}
4590 operand immI_1_31() %{
4591 predicate( n->get_int() >= 1 && n->get_int() <= 31 );
4592 match(ConI);
4594 op_cost(0);
4595 format %{ %}
4596 interface(CONST_INTER);
4597 %}
4599 operand immI_32_63() %{
4600 predicate( n->get_int() >= 32 && n->get_int() <= 63 );
4601 match(ConI);
4602 op_cost(0);
4604 format %{ %}
4605 interface(CONST_INTER);
4606 %}
4608 operand immI_1() %{
4609 predicate( n->get_int() == 1 );
4610 match(ConI);
4612 op_cost(0);
4613 format %{ %}
4614 interface(CONST_INTER);
4615 %}
4617 operand immI_2() %{
4618 predicate( n->get_int() == 2 );
4619 match(ConI);
4621 op_cost(0);
4622 format %{ %}
4623 interface(CONST_INTER);
4624 %}
4626 operand immI_3() %{
4627 predicate( n->get_int() == 3 );
4628 match(ConI);
4630 op_cost(0);
4631 format %{ %}
4632 interface(CONST_INTER);
4633 %}
4635 // Pointer Immediate
4636 operand immP() %{
4637 match(ConP);
4639 op_cost(10);
4640 format %{ %}
4641 interface(CONST_INTER);
4642 %}
4644 // NULL Pointer Immediate
4645 operand immP0() %{
4646 predicate( n->get_ptr() == 0 );
4647 match(ConP);
4648 op_cost(0);
4650 format %{ %}
4651 interface(CONST_INTER);
4652 %}
4654 // Long Immediate
4655 operand immL() %{
4656 match(ConL);
4658 op_cost(20);
4659 format %{ %}
4660 interface(CONST_INTER);
4661 %}
4663 // Long Immediate zero
4664 operand immL0() %{
4665 predicate( n->get_long() == 0L );
4666 match(ConL);
4667 op_cost(0);
4669 format %{ %}
4670 interface(CONST_INTER);
4671 %}
4673 // Long Immediate zero
4674 operand immL_M1() %{
4675 predicate( n->get_long() == -1L );
4676 match(ConL);
4677 op_cost(0);
4679 format %{ %}
4680 interface(CONST_INTER);
4681 %}
4683 // Long immediate from 0 to 127.
4684 // Used for a shorter form of long mul by 10.
4685 operand immL_127() %{
4686 predicate((0 <= n->get_long()) && (n->get_long() <= 127));
4687 match(ConL);
4688 op_cost(0);
4690 format %{ %}
4691 interface(CONST_INTER);
4692 %}
4694 // Long Immediate: low 32-bit mask
4695 operand immL_32bits() %{
4696 predicate(n->get_long() == 0xFFFFFFFFL);
4697 match(ConL);
4698 op_cost(0);
4700 format %{ %}
4701 interface(CONST_INTER);
4702 %}
4704 // Long Immediate: low 32-bit mask
4705 operand immL32() %{
4706 predicate(n->get_long() == (int)(n->get_long()));
4707 match(ConL);
4708 op_cost(20);
4710 format %{ %}
4711 interface(CONST_INTER);
4712 %}
4714 //Double Immediate zero
4715 operand immD0() %{
4716 // Do additional (and counter-intuitive) test against NaN to work around VC++
4717 // bug that generates code such that NaNs compare equal to 0.0
4718 predicate( UseSSE<=1 && n->getd() == 0.0 && !g_isnan(n->getd()) );
4719 match(ConD);
4721 op_cost(5);
4722 format %{ %}
4723 interface(CONST_INTER);
4724 %}
4726 // Double Immediate one
4727 operand immD1() %{
4728 predicate( UseSSE<=1 && n->getd() == 1.0 );
4729 match(ConD);
4731 op_cost(5);
4732 format %{ %}
4733 interface(CONST_INTER);
4734 %}
4736 // Double Immediate
4737 operand immD() %{
4738 predicate(UseSSE<=1);
4739 match(ConD);
4741 op_cost(5);
4742 format %{ %}
4743 interface(CONST_INTER);
4744 %}
4746 operand immXD() %{
4747 predicate(UseSSE>=2);
4748 match(ConD);
4750 op_cost(5);
4751 format %{ %}
4752 interface(CONST_INTER);
4753 %}
4755 // Double Immediate zero
4756 operand immXD0() %{
4757 // Do additional (and counter-intuitive) test against NaN to work around VC++
4758 // bug that generates code such that NaNs compare equal to 0.0 AND do not
4759 // compare equal to -0.0.
4760 predicate( UseSSE>=2 && jlong_cast(n->getd()) == 0 );
4761 match(ConD);
4763 format %{ %}
4764 interface(CONST_INTER);
4765 %}
4767 // Float Immediate zero
4768 operand immF0() %{
4769 predicate(UseSSE == 0 && n->getf() == 0.0F);
4770 match(ConF);
4772 op_cost(5);
4773 format %{ %}
4774 interface(CONST_INTER);
4775 %}
4777 // Float Immediate one
4778 operand immF1() %{
4779 predicate(UseSSE == 0 && n->getf() == 1.0F);
4780 match(ConF);
4782 op_cost(5);
4783 format %{ %}
4784 interface(CONST_INTER);
4785 %}
4787 // Float Immediate
4788 operand immF() %{
4789 predicate( UseSSE == 0 );
4790 match(ConF);
4792 op_cost(5);
4793 format %{ %}
4794 interface(CONST_INTER);
4795 %}
4797 // Float Immediate
4798 operand immXF() %{
4799 predicate(UseSSE >= 1);
4800 match(ConF);
4802 op_cost(5);
4803 format %{ %}
4804 interface(CONST_INTER);
4805 %}
4807 // Float Immediate zero. Zero and not -0.0
4808 operand immXF0() %{
4809 predicate( UseSSE >= 1 && jint_cast(n->getf()) == 0 );
4810 match(ConF);
4812 op_cost(5);
4813 format %{ %}
4814 interface(CONST_INTER);
4815 %}
4817 // Immediates for special shifts (sign extend)
4819 // Constants for increment
4820 operand immI_16() %{
4821 predicate( n->get_int() == 16 );
4822 match(ConI);
4824 format %{ %}
4825 interface(CONST_INTER);
4826 %}
4828 operand immI_24() %{
4829 predicate( n->get_int() == 24 );
4830 match(ConI);
4832 format %{ %}
4833 interface(CONST_INTER);
4834 %}
4836 // Constant for byte-wide masking
4837 operand immI_255() %{
4838 predicate( n->get_int() == 255 );
4839 match(ConI);
4841 format %{ %}
4842 interface(CONST_INTER);
4843 %}
4845 // Constant for short-wide masking
4846 operand immI_65535() %{
4847 predicate(n->get_int() == 65535);
4848 match(ConI);
4850 format %{ %}
4851 interface(CONST_INTER);
4852 %}
4854 // Register Operands
4855 // Integer Register
4856 operand eRegI() %{
4857 constraint(ALLOC_IN_RC(e_reg));
4858 match(RegI);
4859 match(xRegI);
4860 match(eAXRegI);
4861 match(eBXRegI);
4862 match(eCXRegI);
4863 match(eDXRegI);
4864 match(eDIRegI);
4865 match(eSIRegI);
4867 format %{ %}
4868 interface(REG_INTER);
4869 %}
4871 // Subset of Integer Register
4872 operand xRegI(eRegI reg) %{
4873 constraint(ALLOC_IN_RC(x_reg));
4874 match(reg);
4875 match(eAXRegI);
4876 match(eBXRegI);
4877 match(eCXRegI);
4878 match(eDXRegI);
4880 format %{ %}
4881 interface(REG_INTER);
4882 %}
4884 // Special Registers
4885 operand eAXRegI(xRegI reg) %{
4886 constraint(ALLOC_IN_RC(eax_reg));
4887 match(reg);
4888 match(eRegI);
4890 format %{ "EAX" %}
4891 interface(REG_INTER);
4892 %}
4894 // Special Registers
4895 operand eBXRegI(xRegI reg) %{
4896 constraint(ALLOC_IN_RC(ebx_reg));
4897 match(reg);
4898 match(eRegI);
4900 format %{ "EBX" %}
4901 interface(REG_INTER);
4902 %}
4904 operand eCXRegI(xRegI reg) %{
4905 constraint(ALLOC_IN_RC(ecx_reg));
4906 match(reg);
4907 match(eRegI);
4909 format %{ "ECX" %}
4910 interface(REG_INTER);
4911 %}
4913 operand eDXRegI(xRegI reg) %{
4914 constraint(ALLOC_IN_RC(edx_reg));
4915 match(reg);
4916 match(eRegI);
4918 format %{ "EDX" %}
4919 interface(REG_INTER);
4920 %}
4922 operand eDIRegI(xRegI reg) %{
4923 constraint(ALLOC_IN_RC(edi_reg));
4924 match(reg);
4925 match(eRegI);
4927 format %{ "EDI" %}
4928 interface(REG_INTER);
4929 %}
4931 operand naxRegI() %{
4932 constraint(ALLOC_IN_RC(nax_reg));
4933 match(RegI);
4934 match(eCXRegI);
4935 match(eDXRegI);
4936 match(eSIRegI);
4937 match(eDIRegI);
4939 format %{ %}
4940 interface(REG_INTER);
4941 %}
4943 operand nadxRegI() %{
4944 constraint(ALLOC_IN_RC(nadx_reg));
4945 match(RegI);
4946 match(eBXRegI);
4947 match(eCXRegI);
4948 match(eSIRegI);
4949 match(eDIRegI);
4951 format %{ %}
4952 interface(REG_INTER);
4953 %}
4955 operand ncxRegI() %{
4956 constraint(ALLOC_IN_RC(ncx_reg));
4957 match(RegI);
4958 match(eAXRegI);
4959 match(eDXRegI);
4960 match(eSIRegI);
4961 match(eDIRegI);
4963 format %{ %}
4964 interface(REG_INTER);
4965 %}
4967 // // This operand was used by cmpFastUnlock, but conflicted with 'object' reg
4968 // //
4969 operand eSIRegI(xRegI reg) %{
4970 constraint(ALLOC_IN_RC(esi_reg));
4971 match(reg);
4972 match(eRegI);
4974 format %{ "ESI" %}
4975 interface(REG_INTER);
4976 %}
4978 // Pointer Register
4979 operand anyRegP() %{
4980 constraint(ALLOC_IN_RC(any_reg));
4981 match(RegP);
4982 match(eAXRegP);
4983 match(eBXRegP);
4984 match(eCXRegP);
4985 match(eDIRegP);
4986 match(eRegP);
4988 format %{ %}
4989 interface(REG_INTER);
4990 %}
4992 operand eRegP() %{
4993 constraint(ALLOC_IN_RC(e_reg));
4994 match(RegP);
4995 match(eAXRegP);
4996 match(eBXRegP);
4997 match(eCXRegP);
4998 match(eDIRegP);
5000 format %{ %}
5001 interface(REG_INTER);
5002 %}
5004 // On windows95, EBP is not safe to use for implicit null tests.
5005 operand eRegP_no_EBP() %{
5006 constraint(ALLOC_IN_RC(e_reg_no_rbp));
5007 match(RegP);
5008 match(eAXRegP);
5009 match(eBXRegP);
5010 match(eCXRegP);
5011 match(eDIRegP);
5013 op_cost(100);
5014 format %{ %}
5015 interface(REG_INTER);
5016 %}
5018 operand naxRegP() %{
5019 constraint(ALLOC_IN_RC(nax_reg));
5020 match(RegP);
5021 match(eBXRegP);
5022 match(eDXRegP);
5023 match(eCXRegP);
5024 match(eSIRegP);
5025 match(eDIRegP);
5027 format %{ %}
5028 interface(REG_INTER);
5029 %}
5031 operand nabxRegP() %{
5032 constraint(ALLOC_IN_RC(nabx_reg));
5033 match(RegP);
5034 match(eCXRegP);
5035 match(eDXRegP);
5036 match(eSIRegP);
5037 match(eDIRegP);
5039 format %{ %}
5040 interface(REG_INTER);
5041 %}
5043 operand pRegP() %{
5044 constraint(ALLOC_IN_RC(p_reg));
5045 match(RegP);
5046 match(eBXRegP);
5047 match(eDXRegP);
5048 match(eSIRegP);
5049 match(eDIRegP);
5051 format %{ %}
5052 interface(REG_INTER);
5053 %}
5055 // Special Registers
5056 // Return a pointer value
5057 operand eAXRegP(eRegP reg) %{
5058 constraint(ALLOC_IN_RC(eax_reg));
5059 match(reg);
5060 format %{ "EAX" %}
5061 interface(REG_INTER);
5062 %}
5064 // Used in AtomicAdd
5065 operand eBXRegP(eRegP reg) %{
5066 constraint(ALLOC_IN_RC(ebx_reg));
5067 match(reg);
5068 format %{ "EBX" %}
5069 interface(REG_INTER);
5070 %}
5072 // Tail-call (interprocedural jump) to interpreter
5073 operand eCXRegP(eRegP reg) %{
5074 constraint(ALLOC_IN_RC(ecx_reg));
5075 match(reg);
5076 format %{ "ECX" %}
5077 interface(REG_INTER);
5078 %}
5080 operand eSIRegP(eRegP reg) %{
5081 constraint(ALLOC_IN_RC(esi_reg));
5082 match(reg);
5083 format %{ "ESI" %}
5084 interface(REG_INTER);
5085 %}
5087 // Used in rep stosw
5088 operand eDIRegP(eRegP reg) %{
5089 constraint(ALLOC_IN_RC(edi_reg));
5090 match(reg);
5091 format %{ "EDI" %}
5092 interface(REG_INTER);
5093 %}
5095 operand eBPRegP() %{
5096 constraint(ALLOC_IN_RC(ebp_reg));
5097 match(RegP);
5098 format %{ "EBP" %}
5099 interface(REG_INTER);
5100 %}
5102 operand eRegL() %{
5103 constraint(ALLOC_IN_RC(long_reg));
5104 match(RegL);
5105 match(eADXRegL);
5107 format %{ %}
5108 interface(REG_INTER);
5109 %}
5111 operand eADXRegL( eRegL reg ) %{
5112 constraint(ALLOC_IN_RC(eadx_reg));
5113 match(reg);
5115 format %{ "EDX:EAX" %}
5116 interface(REG_INTER);
5117 %}
5119 operand eBCXRegL( eRegL reg ) %{
5120 constraint(ALLOC_IN_RC(ebcx_reg));
5121 match(reg);
5123 format %{ "EBX:ECX" %}
5124 interface(REG_INTER);
5125 %}
5127 // Special case for integer high multiply
5128 operand eADXRegL_low_only() %{
5129 constraint(ALLOC_IN_RC(eadx_reg));
5130 match(RegL);
5132 format %{ "EAX" %}
5133 interface(REG_INTER);
5134 %}
5136 // Flags register, used as output of compare instructions
5137 operand eFlagsReg() %{
5138 constraint(ALLOC_IN_RC(int_flags));
5139 match(RegFlags);
5141 format %{ "EFLAGS" %}
5142 interface(REG_INTER);
5143 %}
5145 // Flags register, used as output of FLOATING POINT compare instructions
5146 operand eFlagsRegU() %{
5147 constraint(ALLOC_IN_RC(int_flags));
5148 match(RegFlags);
5150 format %{ "EFLAGS_U" %}
5151 interface(REG_INTER);
5152 %}
5154 operand eFlagsRegUCF() %{
5155 constraint(ALLOC_IN_RC(int_flags));
5156 match(RegFlags);
5157 predicate(false);
5159 format %{ "EFLAGS_U_CF" %}
5160 interface(REG_INTER);
5161 %}
5163 // Condition Code Register used by long compare
5164 operand flagsReg_long_LTGE() %{
5165 constraint(ALLOC_IN_RC(int_flags));
5166 match(RegFlags);
5167 format %{ "FLAGS_LTGE" %}
5168 interface(REG_INTER);
5169 %}
5170 operand flagsReg_long_EQNE() %{
5171 constraint(ALLOC_IN_RC(int_flags));
5172 match(RegFlags);
5173 format %{ "FLAGS_EQNE" %}
5174 interface(REG_INTER);
5175 %}
5176 operand flagsReg_long_LEGT() %{
5177 constraint(ALLOC_IN_RC(int_flags));
5178 match(RegFlags);
5179 format %{ "FLAGS_LEGT" %}
5180 interface(REG_INTER);
5181 %}
5183 // Float register operands
5184 operand regD() %{
5185 predicate( UseSSE < 2 );
5186 constraint(ALLOC_IN_RC(dbl_reg));
5187 match(RegD);
5188 match(regDPR1);
5189 match(regDPR2);
5190 format %{ %}
5191 interface(REG_INTER);
5192 %}
5194 operand regDPR1(regD reg) %{
5195 predicate( UseSSE < 2 );
5196 constraint(ALLOC_IN_RC(dbl_reg0));
5197 match(reg);
5198 format %{ "FPR1" %}
5199 interface(REG_INTER);
5200 %}
5202 operand regDPR2(regD reg) %{
5203 predicate( UseSSE < 2 );
5204 constraint(ALLOC_IN_RC(dbl_reg1));
5205 match(reg);
5206 format %{ "FPR2" %}
5207 interface(REG_INTER);
5208 %}
5210 operand regnotDPR1(regD reg) %{
5211 predicate( UseSSE < 2 );
5212 constraint(ALLOC_IN_RC(dbl_notreg0));
5213 match(reg);
5214 format %{ %}
5215 interface(REG_INTER);
5216 %}
5218 // XMM Double register operands
5219 operand regXD() %{
5220 predicate( UseSSE>=2 );
5221 constraint(ALLOC_IN_RC(xdb_reg));
5222 match(RegD);
5223 match(regXD6);
5224 match(regXD7);
5225 format %{ %}
5226 interface(REG_INTER);
5227 %}
5229 // XMM6 double register operands
5230 operand regXD6(regXD reg) %{
5231 predicate( UseSSE>=2 );
5232 constraint(ALLOC_IN_RC(xdb_reg6));
5233 match(reg);
5234 format %{ "XMM6" %}
5235 interface(REG_INTER);
5236 %}
5238 // XMM7 double register operands
5239 operand regXD7(regXD reg) %{
5240 predicate( UseSSE>=2 );
5241 constraint(ALLOC_IN_RC(xdb_reg7));
5242 match(reg);
5243 format %{ "XMM7" %}
5244 interface(REG_INTER);
5245 %}
5247 // Float register operands
5248 operand regF() %{
5249 predicate( UseSSE < 2 );
5250 constraint(ALLOC_IN_RC(flt_reg));
5251 match(RegF);
5252 match(regFPR1);
5253 format %{ %}
5254 interface(REG_INTER);
5255 %}
5257 // Float register operands
5258 operand regFPR1(regF reg) %{
5259 predicate( UseSSE < 2 );
5260 constraint(ALLOC_IN_RC(flt_reg0));
5261 match(reg);
5262 format %{ "FPR1" %}
5263 interface(REG_INTER);
5264 %}
5266 // XMM register operands
5267 operand regX() %{
5268 predicate( UseSSE>=1 );
5269 constraint(ALLOC_IN_RC(xmm_reg));
5270 match(RegF);
5271 format %{ %}
5272 interface(REG_INTER);
5273 %}
5276 //----------Memory Operands----------------------------------------------------
5277 // Direct Memory Operand
5278 operand direct(immP addr) %{
5279 match(addr);
5281 format %{ "[$addr]" %}
5282 interface(MEMORY_INTER) %{
5283 base(0xFFFFFFFF);
5284 index(0x4);
5285 scale(0x0);
5286 disp($addr);
5287 %}
5288 %}
5290 // Indirect Memory Operand
5291 operand indirect(eRegP reg) %{
5292 constraint(ALLOC_IN_RC(e_reg));
5293 match(reg);
5295 format %{ "[$reg]" %}
5296 interface(MEMORY_INTER) %{
5297 base($reg);
5298 index(0x4);
5299 scale(0x0);
5300 disp(0x0);
5301 %}
5302 %}
5304 // Indirect Memory Plus Short Offset Operand
5305 operand indOffset8(eRegP reg, immI8 off) %{
5306 match(AddP reg off);
5308 format %{ "[$reg + $off]" %}
5309 interface(MEMORY_INTER) %{
5310 base($reg);
5311 index(0x4);
5312 scale(0x0);
5313 disp($off);
5314 %}
5315 %}
5317 // Indirect Memory Plus Long Offset Operand
5318 operand indOffset32(eRegP reg, immI off) %{
5319 match(AddP reg off);
5321 format %{ "[$reg + $off]" %}
5322 interface(MEMORY_INTER) %{
5323 base($reg);
5324 index(0x4);
5325 scale(0x0);
5326 disp($off);
5327 %}
5328 %}
5330 // Indirect Memory Plus Long Offset Operand
5331 operand indOffset32X(eRegI reg, immP off) %{
5332 match(AddP off reg);
5334 format %{ "[$reg + $off]" %}
5335 interface(MEMORY_INTER) %{
5336 base($reg);
5337 index(0x4);
5338 scale(0x0);
5339 disp($off);
5340 %}
5341 %}
5343 // Indirect Memory Plus Index Register Plus Offset Operand
5344 operand indIndexOffset(eRegP reg, eRegI ireg, immI off) %{
5345 match(AddP (AddP reg ireg) off);
5347 op_cost(10);
5348 format %{"[$reg + $off + $ireg]" %}
5349 interface(MEMORY_INTER) %{
5350 base($reg);
5351 index($ireg);
5352 scale(0x0);
5353 disp($off);
5354 %}
5355 %}
5357 // Indirect Memory Plus Index Register Plus Offset Operand
5358 operand indIndex(eRegP reg, eRegI ireg) %{
5359 match(AddP reg ireg);
5361 op_cost(10);
5362 format %{"[$reg + $ireg]" %}
5363 interface(MEMORY_INTER) %{
5364 base($reg);
5365 index($ireg);
5366 scale(0x0);
5367 disp(0x0);
5368 %}
5369 %}
5371 // // -------------------------------------------------------------------------
5372 // // 486 architecture doesn't support "scale * index + offset" with out a base
5373 // // -------------------------------------------------------------------------
5374 // // Scaled Memory Operands
5375 // // Indirect Memory Times Scale Plus Offset Operand
5376 // operand indScaleOffset(immP off, eRegI ireg, immI2 scale) %{
5377 // match(AddP off (LShiftI ireg scale));
5378 //
5379 // op_cost(10);
5380 // format %{"[$off + $ireg << $scale]" %}
5381 // interface(MEMORY_INTER) %{
5382 // base(0x4);
5383 // index($ireg);
5384 // scale($scale);
5385 // disp($off);
5386 // %}
5387 // %}
5389 // Indirect Memory Times Scale Plus Index Register
5390 operand indIndexScale(eRegP reg, eRegI ireg, immI2 scale) %{
5391 match(AddP reg (LShiftI ireg scale));
5393 op_cost(10);
5394 format %{"[$reg + $ireg << $scale]" %}
5395 interface(MEMORY_INTER) %{
5396 base($reg);
5397 index($ireg);
5398 scale($scale);
5399 disp(0x0);
5400 %}
5401 %}
5403 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5404 operand indIndexScaleOffset(eRegP reg, immI off, eRegI ireg, immI2 scale) %{
5405 match(AddP (AddP reg (LShiftI ireg scale)) off);
5407 op_cost(10);
5408 format %{"[$reg + $off + $ireg << $scale]" %}
5409 interface(MEMORY_INTER) %{
5410 base($reg);
5411 index($ireg);
5412 scale($scale);
5413 disp($off);
5414 %}
5415 %}
5417 //----------Load Long Memory Operands------------------------------------------
5418 // The load-long idiom will use it's address expression again after loading
5419 // the first word of the long. If the load-long destination overlaps with
5420 // registers used in the addressing expression, the 2nd half will be loaded
5421 // from a clobbered address. Fix this by requiring that load-long use
5422 // address registers that do not overlap with the load-long target.
5424 // load-long support
5425 operand load_long_RegP() %{
5426 constraint(ALLOC_IN_RC(esi_reg));
5427 match(RegP);
5428 match(eSIRegP);
5429 op_cost(100);
5430 format %{ %}
5431 interface(REG_INTER);
5432 %}
5434 // Indirect Memory Operand Long
5435 operand load_long_indirect(load_long_RegP reg) %{
5436 constraint(ALLOC_IN_RC(esi_reg));
5437 match(reg);
5439 format %{ "[$reg]" %}
5440 interface(MEMORY_INTER) %{
5441 base($reg);
5442 index(0x4);
5443 scale(0x0);
5444 disp(0x0);
5445 %}
5446 %}
5448 // Indirect Memory Plus Long Offset Operand
5449 operand load_long_indOffset32(load_long_RegP reg, immI off) %{
5450 match(AddP reg off);
5452 format %{ "[$reg + $off]" %}
5453 interface(MEMORY_INTER) %{
5454 base($reg);
5455 index(0x4);
5456 scale(0x0);
5457 disp($off);
5458 %}
5459 %}
5461 opclass load_long_memory(load_long_indirect, load_long_indOffset32);
5464 //----------Special Memory Operands--------------------------------------------
5465 // Stack Slot Operand - This operand is used for loading and storing temporary
5466 // values on the stack where a match requires a value to
5467 // flow through memory.
5468 operand stackSlotP(sRegP reg) %{
5469 constraint(ALLOC_IN_RC(stack_slots));
5470 // No match rule because this operand is only generated in matching
5471 format %{ "[$reg]" %}
5472 interface(MEMORY_INTER) %{
5473 base(0x4); // ESP
5474 index(0x4); // No Index
5475 scale(0x0); // No Scale
5476 disp($reg); // Stack Offset
5477 %}
5478 %}
5480 operand stackSlotI(sRegI reg) %{
5481 constraint(ALLOC_IN_RC(stack_slots));
5482 // No match rule because this operand is only generated in matching
5483 format %{ "[$reg]" %}
5484 interface(MEMORY_INTER) %{
5485 base(0x4); // ESP
5486 index(0x4); // No Index
5487 scale(0x0); // No Scale
5488 disp($reg); // Stack Offset
5489 %}
5490 %}
5492 operand stackSlotF(sRegF reg) %{
5493 constraint(ALLOC_IN_RC(stack_slots));
5494 // No match rule because this operand is only generated in matching
5495 format %{ "[$reg]" %}
5496 interface(MEMORY_INTER) %{
5497 base(0x4); // ESP
5498 index(0x4); // No Index
5499 scale(0x0); // No Scale
5500 disp($reg); // Stack Offset
5501 %}
5502 %}
5504 operand stackSlotD(sRegD reg) %{
5505 constraint(ALLOC_IN_RC(stack_slots));
5506 // No match rule because this operand is only generated in matching
5507 format %{ "[$reg]" %}
5508 interface(MEMORY_INTER) %{
5509 base(0x4); // ESP
5510 index(0x4); // No Index
5511 scale(0x0); // No Scale
5512 disp($reg); // Stack Offset
5513 %}
5514 %}
5516 operand stackSlotL(sRegL reg) %{
5517 constraint(ALLOC_IN_RC(stack_slots));
5518 // No match rule because this operand is only generated in matching
5519 format %{ "[$reg]" %}
5520 interface(MEMORY_INTER) %{
5521 base(0x4); // ESP
5522 index(0x4); // No Index
5523 scale(0x0); // No Scale
5524 disp($reg); // Stack Offset
5525 %}
5526 %}
5528 //----------Memory Operands - Win95 Implicit Null Variants----------------
5529 // Indirect Memory Operand
5530 operand indirect_win95_safe(eRegP_no_EBP reg)
5531 %{
5532 constraint(ALLOC_IN_RC(e_reg));
5533 match(reg);
5535 op_cost(100);
5536 format %{ "[$reg]" %}
5537 interface(MEMORY_INTER) %{
5538 base($reg);
5539 index(0x4);
5540 scale(0x0);
5541 disp(0x0);
5542 %}
5543 %}
5545 // Indirect Memory Plus Short Offset Operand
5546 operand indOffset8_win95_safe(eRegP_no_EBP reg, immI8 off)
5547 %{
5548 match(AddP reg off);
5550 op_cost(100);
5551 format %{ "[$reg + $off]" %}
5552 interface(MEMORY_INTER) %{
5553 base($reg);
5554 index(0x4);
5555 scale(0x0);
5556 disp($off);
5557 %}
5558 %}
5560 // Indirect Memory Plus Long Offset Operand
5561 operand indOffset32_win95_safe(eRegP_no_EBP reg, immI off)
5562 %{
5563 match(AddP reg off);
5565 op_cost(100);
5566 format %{ "[$reg + $off]" %}
5567 interface(MEMORY_INTER) %{
5568 base($reg);
5569 index(0x4);
5570 scale(0x0);
5571 disp($off);
5572 %}
5573 %}
5575 // Indirect Memory Plus Index Register Plus Offset Operand
5576 operand indIndexOffset_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI off)
5577 %{
5578 match(AddP (AddP reg ireg) off);
5580 op_cost(100);
5581 format %{"[$reg + $off + $ireg]" %}
5582 interface(MEMORY_INTER) %{
5583 base($reg);
5584 index($ireg);
5585 scale(0x0);
5586 disp($off);
5587 %}
5588 %}
5590 // Indirect Memory Times Scale Plus Index Register
5591 operand indIndexScale_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI2 scale)
5592 %{
5593 match(AddP reg (LShiftI ireg scale));
5595 op_cost(100);
5596 format %{"[$reg + $ireg << $scale]" %}
5597 interface(MEMORY_INTER) %{
5598 base($reg);
5599 index($ireg);
5600 scale($scale);
5601 disp(0x0);
5602 %}
5603 %}
5605 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5606 operand indIndexScaleOffset_win95_safe(eRegP_no_EBP reg, immI off, eRegI ireg, immI2 scale)
5607 %{
5608 match(AddP (AddP reg (LShiftI ireg scale)) off);
5610 op_cost(100);
5611 format %{"[$reg + $off + $ireg << $scale]" %}
5612 interface(MEMORY_INTER) %{
5613 base($reg);
5614 index($ireg);
5615 scale($scale);
5616 disp($off);
5617 %}
5618 %}
5620 //----------Conditional Branch Operands----------------------------------------
5621 // Comparison Op - This is the operation of the comparison, and is limited to
5622 // the following set of codes:
5623 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=)
5624 //
5625 // Other attributes of the comparison, such as unsignedness, are specified
5626 // by the comparison instruction that sets a condition code flags register.
5627 // That result is represented by a flags operand whose subtype is appropriate
5628 // to the unsignedness (etc.) of the comparison.
5629 //
5630 // Later, the instruction which matches both the Comparison Op (a Bool) and
5631 // the flags (produced by the Cmp) specifies the coding of the comparison op
5632 // by matching a specific subtype of Bool operand below, such as cmpOpU.
5634 // Comparision Code
5635 operand cmpOp() %{
5636 match(Bool);
5638 format %{ "" %}
5639 interface(COND_INTER) %{
5640 equal(0x4, "e");
5641 not_equal(0x5, "ne");
5642 less(0xC, "l");
5643 greater_equal(0xD, "ge");
5644 less_equal(0xE, "le");
5645 greater(0xF, "g");
5646 %}
5647 %}
5649 // Comparison Code, unsigned compare. Used by FP also, with
5650 // C2 (unordered) turned into GT or LT already. The other bits
5651 // C0 and C3 are turned into Carry & Zero flags.
5652 operand cmpOpU() %{
5653 match(Bool);
5655 format %{ "" %}
5656 interface(COND_INTER) %{
5657 equal(0x4, "e");
5658 not_equal(0x5, "ne");
5659 less(0x2, "b");
5660 greater_equal(0x3, "nb");
5661 less_equal(0x6, "be");
5662 greater(0x7, "nbe");
5663 %}
5664 %}
5666 // Floating comparisons that don't require any fixup for the unordered case
5667 operand cmpOpUCF() %{
5668 match(Bool);
5669 predicate(n->as_Bool()->_test._test == BoolTest::lt ||
5670 n->as_Bool()->_test._test == BoolTest::ge ||
5671 n->as_Bool()->_test._test == BoolTest::le ||
5672 n->as_Bool()->_test._test == BoolTest::gt);
5673 format %{ "" %}
5674 interface(COND_INTER) %{
5675 equal(0x4, "e");
5676 not_equal(0x5, "ne");
5677 less(0x2, "b");
5678 greater_equal(0x3, "nb");
5679 less_equal(0x6, "be");
5680 greater(0x7, "nbe");
5681 %}
5682 %}
5685 // Floating comparisons that can be fixed up with extra conditional jumps
5686 operand cmpOpUCF2() %{
5687 match(Bool);
5688 predicate(n->as_Bool()->_test._test == BoolTest::ne ||
5689 n->as_Bool()->_test._test == BoolTest::eq);
5690 format %{ "" %}
5691 interface(COND_INTER) %{
5692 equal(0x4, "e");
5693 not_equal(0x5, "ne");
5694 less(0x2, "b");
5695 greater_equal(0x3, "nb");
5696 less_equal(0x6, "be");
5697 greater(0x7, "nbe");
5698 %}
5699 %}
5701 // Comparison Code for FP conditional move
5702 operand cmpOp_fcmov() %{
5703 match(Bool);
5705 format %{ "" %}
5706 interface(COND_INTER) %{
5707 equal (0x0C8);
5708 not_equal (0x1C8);
5709 less (0x0C0);
5710 greater_equal(0x1C0);
5711 less_equal (0x0D0);
5712 greater (0x1D0);
5713 %}
5714 %}
5716 // Comparision Code used in long compares
5717 operand cmpOp_commute() %{
5718 match(Bool);
5720 format %{ "" %}
5721 interface(COND_INTER) %{
5722 equal(0x4, "e");
5723 not_equal(0x5, "ne");
5724 less(0xF, "g");
5725 greater_equal(0xE, "le");
5726 less_equal(0xD, "ge");
5727 greater(0xC, "l");
5728 %}
5729 %}
5731 //----------OPERAND CLASSES----------------------------------------------------
5732 // Operand Classes are groups of operands that are used as to simplify
5733 // instruction definitions by not requiring the AD writer to specify separate
5734 // instructions for every form of operand when the instruction accepts
5735 // multiple operand types with the same basic encoding and format. The classic
5736 // case of this is memory operands.
5738 opclass memory(direct, indirect, indOffset8, indOffset32, indOffset32X, indIndexOffset,
5739 indIndex, indIndexScale, indIndexScaleOffset);
5741 // Long memory operations are encoded in 2 instructions and a +4 offset.
5742 // This means some kind of offset is always required and you cannot use
5743 // an oop as the offset (done when working on static globals).
5744 opclass long_memory(direct, indirect, indOffset8, indOffset32, indIndexOffset,
5745 indIndex, indIndexScale, indIndexScaleOffset);
5748 //----------PIPELINE-----------------------------------------------------------
5749 // Rules which define the behavior of the target architectures pipeline.
5750 pipeline %{
5752 //----------ATTRIBUTES---------------------------------------------------------
5753 attributes %{
5754 variable_size_instructions; // Fixed size instructions
5755 max_instructions_per_bundle = 3; // Up to 3 instructions per bundle
5756 instruction_unit_size = 1; // An instruction is 1 bytes long
5757 instruction_fetch_unit_size = 16; // The processor fetches one line
5758 instruction_fetch_units = 1; // of 16 bytes
5760 // List of nop instructions
5761 nops( MachNop );
5762 %}
5764 //----------RESOURCES----------------------------------------------------------
5765 // Resources are the functional units available to the machine
5767 // Generic P2/P3 pipeline
5768 // 3 decoders, only D0 handles big operands; a "bundle" is the limit of
5769 // 3 instructions decoded per cycle.
5770 // 2 load/store ops per cycle, 1 branch, 1 FPU,
5771 // 2 ALU op, only ALU0 handles mul/div instructions.
5772 resources( D0, D1, D2, DECODE = D0 | D1 | D2,
5773 MS0, MS1, MEM = MS0 | MS1,
5774 BR, FPU,
5775 ALU0, ALU1, ALU = ALU0 | ALU1 );
5777 //----------PIPELINE DESCRIPTION-----------------------------------------------
5778 // Pipeline Description specifies the stages in the machine's pipeline
5780 // Generic P2/P3 pipeline
5781 pipe_desc(S0, S1, S2, S3, S4, S5);
5783 //----------PIPELINE CLASSES---------------------------------------------------
5784 // Pipeline Classes describe the stages in which input and output are
5785 // referenced by the hardware pipeline.
5787 // Naming convention: ialu or fpu
5788 // Then: _reg
5789 // Then: _reg if there is a 2nd register
5790 // Then: _long if it's a pair of instructions implementing a long
5791 // Then: _fat if it requires the big decoder
5792 // Or: _mem if it requires the big decoder and a memory unit.
5794 // Integer ALU reg operation
5795 pipe_class ialu_reg(eRegI dst) %{
5796 single_instruction;
5797 dst : S4(write);
5798 dst : S3(read);
5799 DECODE : S0; // any decoder
5800 ALU : S3; // any alu
5801 %}
5803 // Long ALU reg operation
5804 pipe_class ialu_reg_long(eRegL dst) %{
5805 instruction_count(2);
5806 dst : S4(write);
5807 dst : S3(read);
5808 DECODE : S0(2); // any 2 decoders
5809 ALU : S3(2); // both alus
5810 %}
5812 // Integer ALU reg operation using big decoder
5813 pipe_class ialu_reg_fat(eRegI dst) %{
5814 single_instruction;
5815 dst : S4(write);
5816 dst : S3(read);
5817 D0 : S0; // big decoder only
5818 ALU : S3; // any alu
5819 %}
5821 // Long ALU reg operation using big decoder
5822 pipe_class ialu_reg_long_fat(eRegL dst) %{
5823 instruction_count(2);
5824 dst : S4(write);
5825 dst : S3(read);
5826 D0 : S0(2); // big decoder only; twice
5827 ALU : S3(2); // any 2 alus
5828 %}
5830 // Integer ALU reg-reg operation
5831 pipe_class ialu_reg_reg(eRegI dst, eRegI src) %{
5832 single_instruction;
5833 dst : S4(write);
5834 src : S3(read);
5835 DECODE : S0; // any decoder
5836 ALU : S3; // any alu
5837 %}
5839 // Long ALU reg-reg operation
5840 pipe_class ialu_reg_reg_long(eRegL dst, eRegL src) %{
5841 instruction_count(2);
5842 dst : S4(write);
5843 src : S3(read);
5844 DECODE : S0(2); // any 2 decoders
5845 ALU : S3(2); // both alus
5846 %}
5848 // Integer ALU reg-reg operation
5849 pipe_class ialu_reg_reg_fat(eRegI dst, memory src) %{
5850 single_instruction;
5851 dst : S4(write);
5852 src : S3(read);
5853 D0 : S0; // big decoder only
5854 ALU : S3; // any alu
5855 %}
5857 // Long ALU reg-reg operation
5858 pipe_class ialu_reg_reg_long_fat(eRegL dst, eRegL src) %{
5859 instruction_count(2);
5860 dst : S4(write);
5861 src : S3(read);
5862 D0 : S0(2); // big decoder only; twice
5863 ALU : S3(2); // both alus
5864 %}
5866 // Integer ALU reg-mem operation
5867 pipe_class ialu_reg_mem(eRegI dst, memory mem) %{
5868 single_instruction;
5869 dst : S5(write);
5870 mem : S3(read);
5871 D0 : S0; // big decoder only
5872 ALU : S4; // any alu
5873 MEM : S3; // any mem
5874 %}
5876 // Long ALU reg-mem operation
5877 pipe_class ialu_reg_long_mem(eRegL dst, load_long_memory mem) %{
5878 instruction_count(2);
5879 dst : S5(write);
5880 mem : S3(read);
5881 D0 : S0(2); // big decoder only; twice
5882 ALU : S4(2); // any 2 alus
5883 MEM : S3(2); // both mems
5884 %}
5886 // Integer mem operation (prefetch)
5887 pipe_class ialu_mem(memory mem)
5888 %{
5889 single_instruction;
5890 mem : S3(read);
5891 D0 : S0; // big decoder only
5892 MEM : S3; // any mem
5893 %}
5895 // Integer Store to Memory
5896 pipe_class ialu_mem_reg(memory mem, eRegI src) %{
5897 single_instruction;
5898 mem : S3(read);
5899 src : S5(read);
5900 D0 : S0; // big decoder only
5901 ALU : S4; // any alu
5902 MEM : S3;
5903 %}
5905 // Long Store to Memory
5906 pipe_class ialu_mem_long_reg(memory mem, eRegL src) %{
5907 instruction_count(2);
5908 mem : S3(read);
5909 src : S5(read);
5910 D0 : S0(2); // big decoder only; twice
5911 ALU : S4(2); // any 2 alus
5912 MEM : S3(2); // Both mems
5913 %}
5915 // Integer Store to Memory
5916 pipe_class ialu_mem_imm(memory mem) %{
5917 single_instruction;
5918 mem : S3(read);
5919 D0 : S0; // big decoder only
5920 ALU : S4; // any alu
5921 MEM : S3;
5922 %}
5924 // Integer ALU0 reg-reg operation
5925 pipe_class ialu_reg_reg_alu0(eRegI dst, eRegI src) %{
5926 single_instruction;
5927 dst : S4(write);
5928 src : S3(read);
5929 D0 : S0; // Big decoder only
5930 ALU0 : S3; // only alu0
5931 %}
5933 // Integer ALU0 reg-mem operation
5934 pipe_class ialu_reg_mem_alu0(eRegI dst, memory mem) %{
5935 single_instruction;
5936 dst : S5(write);
5937 mem : S3(read);
5938 D0 : S0; // big decoder only
5939 ALU0 : S4; // ALU0 only
5940 MEM : S3; // any mem
5941 %}
5943 // Integer ALU reg-reg operation
5944 pipe_class ialu_cr_reg_reg(eFlagsReg cr, eRegI src1, eRegI src2) %{
5945 single_instruction;
5946 cr : S4(write);
5947 src1 : S3(read);
5948 src2 : S3(read);
5949 DECODE : S0; // any decoder
5950 ALU : S3; // any alu
5951 %}
5953 // Integer ALU reg-imm operation
5954 pipe_class ialu_cr_reg_imm(eFlagsReg cr, eRegI src1) %{
5955 single_instruction;
5956 cr : S4(write);
5957 src1 : S3(read);
5958 DECODE : S0; // any decoder
5959 ALU : S3; // any alu
5960 %}
5962 // Integer ALU reg-mem operation
5963 pipe_class ialu_cr_reg_mem(eFlagsReg cr, eRegI src1, memory src2) %{
5964 single_instruction;
5965 cr : S4(write);
5966 src1 : S3(read);
5967 src2 : S3(read);
5968 D0 : S0; // big decoder only
5969 ALU : S4; // any alu
5970 MEM : S3;
5971 %}
5973 // Conditional move reg-reg
5974 pipe_class pipe_cmplt( eRegI p, eRegI q, eRegI y ) %{
5975 instruction_count(4);
5976 y : S4(read);
5977 q : S3(read);
5978 p : S3(read);
5979 DECODE : S0(4); // any decoder
5980 %}
5982 // Conditional move reg-reg
5983 pipe_class pipe_cmov_reg( eRegI dst, eRegI src, eFlagsReg cr ) %{
5984 single_instruction;
5985 dst : S4(write);
5986 src : S3(read);
5987 cr : S3(read);
5988 DECODE : S0; // any decoder
5989 %}
5991 // Conditional move reg-mem
5992 pipe_class pipe_cmov_mem( eFlagsReg cr, eRegI dst, memory src) %{
5993 single_instruction;
5994 dst : S4(write);
5995 src : S3(read);
5996 cr : S3(read);
5997 DECODE : S0; // any decoder
5998 MEM : S3;
5999 %}
6001 // Conditional move reg-reg long
6002 pipe_class pipe_cmov_reg_long( eFlagsReg cr, eRegL dst, eRegL src) %{
6003 single_instruction;
6004 dst : S4(write);
6005 src : S3(read);
6006 cr : S3(read);
6007 DECODE : S0(2); // any 2 decoders
6008 %}
6010 // Conditional move double reg-reg
6011 pipe_class pipe_cmovD_reg( eFlagsReg cr, regDPR1 dst, regD src) %{
6012 single_instruction;
6013 dst : S4(write);
6014 src : S3(read);
6015 cr : S3(read);
6016 DECODE : S0; // any decoder
6017 %}
6019 // Float reg-reg operation
6020 pipe_class fpu_reg(regD dst) %{
6021 instruction_count(2);
6022 dst : S3(read);
6023 DECODE : S0(2); // any 2 decoders
6024 FPU : S3;
6025 %}
6027 // Float reg-reg operation
6028 pipe_class fpu_reg_reg(regD dst, regD src) %{
6029 instruction_count(2);
6030 dst : S4(write);
6031 src : S3(read);
6032 DECODE : S0(2); // any 2 decoders
6033 FPU : S3;
6034 %}
6036 // Float reg-reg operation
6037 pipe_class fpu_reg_reg_reg(regD dst, regD src1, regD src2) %{
6038 instruction_count(3);
6039 dst : S4(write);
6040 src1 : S3(read);
6041 src2 : S3(read);
6042 DECODE : S0(3); // any 3 decoders
6043 FPU : S3(2);
6044 %}
6046 // Float reg-reg operation
6047 pipe_class fpu_reg_reg_reg_reg(regD dst, regD src1, regD src2, regD src3) %{
6048 instruction_count(4);
6049 dst : S4(write);
6050 src1 : S3(read);
6051 src2 : S3(read);
6052 src3 : S3(read);
6053 DECODE : S0(4); // any 3 decoders
6054 FPU : S3(2);
6055 %}
6057 // Float reg-reg operation
6058 pipe_class fpu_reg_mem_reg_reg(regD dst, memory src1, regD src2, regD src3) %{
6059 instruction_count(4);
6060 dst : S4(write);
6061 src1 : S3(read);
6062 src2 : S3(read);
6063 src3 : S3(read);
6064 DECODE : S1(3); // any 3 decoders
6065 D0 : S0; // Big decoder only
6066 FPU : S3(2);
6067 MEM : S3;
6068 %}
6070 // Float reg-mem operation
6071 pipe_class fpu_reg_mem(regD dst, memory mem) %{
6072 instruction_count(2);
6073 dst : S5(write);
6074 mem : S3(read);
6075 D0 : S0; // big decoder only
6076 DECODE : S1; // any decoder for FPU POP
6077 FPU : S4;
6078 MEM : S3; // any mem
6079 %}
6081 // Float reg-mem operation
6082 pipe_class fpu_reg_reg_mem(regD dst, regD src1, memory mem) %{
6083 instruction_count(3);
6084 dst : S5(write);
6085 src1 : S3(read);
6086 mem : S3(read);
6087 D0 : S0; // big decoder only
6088 DECODE : S1(2); // any decoder for FPU POP
6089 FPU : S4;
6090 MEM : S3; // any mem
6091 %}
6093 // Float mem-reg operation
6094 pipe_class fpu_mem_reg(memory mem, regD src) %{
6095 instruction_count(2);
6096 src : S5(read);
6097 mem : S3(read);
6098 DECODE : S0; // any decoder for FPU PUSH
6099 D0 : S1; // big decoder only
6100 FPU : S4;
6101 MEM : S3; // any mem
6102 %}
6104 pipe_class fpu_mem_reg_reg(memory mem, regD src1, regD src2) %{
6105 instruction_count(3);
6106 src1 : S3(read);
6107 src2 : S3(read);
6108 mem : S3(read);
6109 DECODE : S0(2); // any decoder for FPU PUSH
6110 D0 : S1; // big decoder only
6111 FPU : S4;
6112 MEM : S3; // any mem
6113 %}
6115 pipe_class fpu_mem_reg_mem(memory mem, regD src1, memory src2) %{
6116 instruction_count(3);
6117 src1 : S3(read);
6118 src2 : S3(read);
6119 mem : S4(read);
6120 DECODE : S0; // any decoder for FPU PUSH
6121 D0 : S0(2); // big decoder only
6122 FPU : S4;
6123 MEM : S3(2); // any mem
6124 %}
6126 pipe_class fpu_mem_mem(memory dst, memory src1) %{
6127 instruction_count(2);
6128 src1 : S3(read);
6129 dst : S4(read);
6130 D0 : S0(2); // big decoder only
6131 MEM : S3(2); // any mem
6132 %}
6134 pipe_class fpu_mem_mem_mem(memory dst, memory src1, memory src2) %{
6135 instruction_count(3);
6136 src1 : S3(read);
6137 src2 : S3(read);
6138 dst : S4(read);
6139 D0 : S0(3); // big decoder only
6140 FPU : S4;
6141 MEM : S3(3); // any mem
6142 %}
6144 pipe_class fpu_mem_reg_con(memory mem, regD src1) %{
6145 instruction_count(3);
6146 src1 : S4(read);
6147 mem : S4(read);
6148 DECODE : S0; // any decoder for FPU PUSH
6149 D0 : S0(2); // big decoder only
6150 FPU : S4;
6151 MEM : S3(2); // any mem
6152 %}
6154 // Float load constant
6155 pipe_class fpu_reg_con(regD dst) %{
6156 instruction_count(2);
6157 dst : S5(write);
6158 D0 : S0; // big decoder only for the load
6159 DECODE : S1; // any decoder for FPU POP
6160 FPU : S4;
6161 MEM : S3; // any mem
6162 %}
6164 // Float load constant
6165 pipe_class fpu_reg_reg_con(regD dst, regD src) %{
6166 instruction_count(3);
6167 dst : S5(write);
6168 src : S3(read);
6169 D0 : S0; // big decoder only for the load
6170 DECODE : S1(2); // any decoder for FPU POP
6171 FPU : S4;
6172 MEM : S3; // any mem
6173 %}
6175 // UnConditional branch
6176 pipe_class pipe_jmp( label labl ) %{
6177 single_instruction;
6178 BR : S3;
6179 %}
6181 // Conditional branch
6182 pipe_class pipe_jcc( cmpOp cmp, eFlagsReg cr, label labl ) %{
6183 single_instruction;
6184 cr : S1(read);
6185 BR : S3;
6186 %}
6188 // Allocation idiom
6189 pipe_class pipe_cmpxchg( eRegP dst, eRegP heap_ptr ) %{
6190 instruction_count(1); force_serialization;
6191 fixed_latency(6);
6192 heap_ptr : S3(read);
6193 DECODE : S0(3);
6194 D0 : S2;
6195 MEM : S3;
6196 ALU : S3(2);
6197 dst : S5(write);
6198 BR : S5;
6199 %}
6201 // Generic big/slow expanded idiom
6202 pipe_class pipe_slow( ) %{
6203 instruction_count(10); multiple_bundles; force_serialization;
6204 fixed_latency(100);
6205 D0 : S0(2);
6206 MEM : S3(2);
6207 %}
6209 // The real do-nothing guy
6210 pipe_class empty( ) %{
6211 instruction_count(0);
6212 %}
6214 // Define the class for the Nop node
6215 define %{
6216 MachNop = empty;
6217 %}
6219 %}
6221 //----------INSTRUCTIONS-------------------------------------------------------
6222 //
6223 // match -- States which machine-independent subtree may be replaced
6224 // by this instruction.
6225 // ins_cost -- The estimated cost of this instruction is used by instruction
6226 // selection to identify a minimum cost tree of machine
6227 // instructions that matches a tree of machine-independent
6228 // instructions.
6229 // format -- A string providing the disassembly for this instruction.
6230 // The value of an instruction's operand may be inserted
6231 // by referring to it with a '$' prefix.
6232 // opcode -- Three instruction opcodes may be provided. These are referred
6233 // to within an encode class as $primary, $secondary, and $tertiary
6234 // respectively. The primary opcode is commonly used to
6235 // indicate the type of machine instruction, while secondary
6236 // and tertiary are often used for prefix options or addressing
6237 // modes.
6238 // ins_encode -- A list of encode classes with parameters. The encode class
6239 // name must have been defined in an 'enc_class' specification
6240 // in the encode section of the architecture description.
6242 //----------BSWAP-Instruction--------------------------------------------------
6243 instruct bytes_reverse_int(eRegI dst) %{
6244 match(Set dst (ReverseBytesI dst));
6246 format %{ "BSWAP $dst" %}
6247 opcode(0x0F, 0xC8);
6248 ins_encode( OpcP, OpcSReg(dst) );
6249 ins_pipe( ialu_reg );
6250 %}
6252 instruct bytes_reverse_long(eRegL dst) %{
6253 match(Set dst (ReverseBytesL dst));
6255 format %{ "BSWAP $dst.lo\n\t"
6256 "BSWAP $dst.hi\n\t"
6257 "XCHG $dst.lo $dst.hi" %}
6259 ins_cost(125);
6260 ins_encode( bswap_long_bytes(dst) );
6261 ins_pipe( ialu_reg_reg);
6262 %}
6264 instruct bytes_reverse_unsigned_short(eRegI dst) %{
6265 match(Set dst (ReverseBytesUS dst));
6267 format %{ "BSWAP $dst\n\t"
6268 "SHR $dst,16\n\t" %}
6269 ins_encode %{
6270 __ bswapl($dst$$Register);
6271 __ shrl($dst$$Register, 16);
6272 %}
6273 ins_pipe( ialu_reg );
6274 %}
6276 instruct bytes_reverse_short(eRegI dst) %{
6277 match(Set dst (ReverseBytesS dst));
6279 format %{ "BSWAP $dst\n\t"
6280 "SAR $dst,16\n\t" %}
6281 ins_encode %{
6282 __ bswapl($dst$$Register);
6283 __ sarl($dst$$Register, 16);
6284 %}
6285 ins_pipe( ialu_reg );
6286 %}
6289 //---------- Zeros Count Instructions ------------------------------------------
6291 instruct countLeadingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6292 predicate(UseCountLeadingZerosInstruction);
6293 match(Set dst (CountLeadingZerosI src));
6294 effect(KILL cr);
6296 format %{ "LZCNT $dst, $src\t# count leading zeros (int)" %}
6297 ins_encode %{
6298 __ lzcntl($dst$$Register, $src$$Register);
6299 %}
6300 ins_pipe(ialu_reg);
6301 %}
6303 instruct countLeadingZerosI_bsr(eRegI dst, eRegI src, eFlagsReg cr) %{
6304 predicate(!UseCountLeadingZerosInstruction);
6305 match(Set dst (CountLeadingZerosI src));
6306 effect(KILL cr);
6308 format %{ "BSR $dst, $src\t# count leading zeros (int)\n\t"
6309 "JNZ skip\n\t"
6310 "MOV $dst, -1\n"
6311 "skip:\n\t"
6312 "NEG $dst\n\t"
6313 "ADD $dst, 31" %}
6314 ins_encode %{
6315 Register Rdst = $dst$$Register;
6316 Register Rsrc = $src$$Register;
6317 Label skip;
6318 __ bsrl(Rdst, Rsrc);
6319 __ jccb(Assembler::notZero, skip);
6320 __ movl(Rdst, -1);
6321 __ bind(skip);
6322 __ negl(Rdst);
6323 __ addl(Rdst, BitsPerInt - 1);
6324 %}
6325 ins_pipe(ialu_reg);
6326 %}
6328 instruct countLeadingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6329 predicate(UseCountLeadingZerosInstruction);
6330 match(Set dst (CountLeadingZerosL src));
6331 effect(TEMP dst, KILL cr);
6333 format %{ "LZCNT $dst, $src.hi\t# count leading zeros (long)\n\t"
6334 "JNC done\n\t"
6335 "LZCNT $dst, $src.lo\n\t"
6336 "ADD $dst, 32\n"
6337 "done:" %}
6338 ins_encode %{
6339 Register Rdst = $dst$$Register;
6340 Register Rsrc = $src$$Register;
6341 Label done;
6342 __ lzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
6343 __ jccb(Assembler::carryClear, done);
6344 __ lzcntl(Rdst, Rsrc);
6345 __ addl(Rdst, BitsPerInt);
6346 __ bind(done);
6347 %}
6348 ins_pipe(ialu_reg);
6349 %}
6351 instruct countLeadingZerosL_bsr(eRegI dst, eRegL src, eFlagsReg cr) %{
6352 predicate(!UseCountLeadingZerosInstruction);
6353 match(Set dst (CountLeadingZerosL src));
6354 effect(TEMP dst, KILL cr);
6356 format %{ "BSR $dst, $src.hi\t# count leading zeros (long)\n\t"
6357 "JZ msw_is_zero\n\t"
6358 "ADD $dst, 32\n\t"
6359 "JMP not_zero\n"
6360 "msw_is_zero:\n\t"
6361 "BSR $dst, $src.lo\n\t"
6362 "JNZ not_zero\n\t"
6363 "MOV $dst, -1\n"
6364 "not_zero:\n\t"
6365 "NEG $dst\n\t"
6366 "ADD $dst, 63\n" %}
6367 ins_encode %{
6368 Register Rdst = $dst$$Register;
6369 Register Rsrc = $src$$Register;
6370 Label msw_is_zero;
6371 Label not_zero;
6372 __ bsrl(Rdst, HIGH_FROM_LOW(Rsrc));
6373 __ jccb(Assembler::zero, msw_is_zero);
6374 __ addl(Rdst, BitsPerInt);
6375 __ jmpb(not_zero);
6376 __ bind(msw_is_zero);
6377 __ bsrl(Rdst, Rsrc);
6378 __ jccb(Assembler::notZero, not_zero);
6379 __ movl(Rdst, -1);
6380 __ bind(not_zero);
6381 __ negl(Rdst);
6382 __ addl(Rdst, BitsPerLong - 1);
6383 %}
6384 ins_pipe(ialu_reg);
6385 %}
6387 instruct countTrailingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6388 match(Set dst (CountTrailingZerosI src));
6389 effect(KILL cr);
6391 format %{ "BSF $dst, $src\t# count trailing zeros (int)\n\t"
6392 "JNZ done\n\t"
6393 "MOV $dst, 32\n"
6394 "done:" %}
6395 ins_encode %{
6396 Register Rdst = $dst$$Register;
6397 Label done;
6398 __ bsfl(Rdst, $src$$Register);
6399 __ jccb(Assembler::notZero, done);
6400 __ movl(Rdst, BitsPerInt);
6401 __ bind(done);
6402 %}
6403 ins_pipe(ialu_reg);
6404 %}
6406 instruct countTrailingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6407 match(Set dst (CountTrailingZerosL src));
6408 effect(TEMP dst, KILL cr);
6410 format %{ "BSF $dst, $src.lo\t# count trailing zeros (long)\n\t"
6411 "JNZ done\n\t"
6412 "BSF $dst, $src.hi\n\t"
6413 "JNZ msw_not_zero\n\t"
6414 "MOV $dst, 32\n"
6415 "msw_not_zero:\n\t"
6416 "ADD $dst, 32\n"
6417 "done:" %}
6418 ins_encode %{
6419 Register Rdst = $dst$$Register;
6420 Register Rsrc = $src$$Register;
6421 Label msw_not_zero;
6422 Label done;
6423 __ bsfl(Rdst, Rsrc);
6424 __ jccb(Assembler::notZero, done);
6425 __ bsfl(Rdst, HIGH_FROM_LOW(Rsrc));
6426 __ jccb(Assembler::notZero, msw_not_zero);
6427 __ movl(Rdst, BitsPerInt);
6428 __ bind(msw_not_zero);
6429 __ addl(Rdst, BitsPerInt);
6430 __ bind(done);
6431 %}
6432 ins_pipe(ialu_reg);
6433 %}
6436 //---------- Population Count Instructions -------------------------------------
6438 instruct popCountI(eRegI dst, eRegI src) %{
6439 predicate(UsePopCountInstruction);
6440 match(Set dst (PopCountI src));
6442 format %{ "POPCNT $dst, $src" %}
6443 ins_encode %{
6444 __ popcntl($dst$$Register, $src$$Register);
6445 %}
6446 ins_pipe(ialu_reg);
6447 %}
6449 instruct popCountI_mem(eRegI dst, memory mem) %{
6450 predicate(UsePopCountInstruction);
6451 match(Set dst (PopCountI (LoadI mem)));
6453 format %{ "POPCNT $dst, $mem" %}
6454 ins_encode %{
6455 __ popcntl($dst$$Register, $mem$$Address);
6456 %}
6457 ins_pipe(ialu_reg);
6458 %}
6460 // Note: Long.bitCount(long) returns an int.
6461 instruct popCountL(eRegI dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
6462 predicate(UsePopCountInstruction);
6463 match(Set dst (PopCountL src));
6464 effect(KILL cr, TEMP tmp, TEMP dst);
6466 format %{ "POPCNT $dst, $src.lo\n\t"
6467 "POPCNT $tmp, $src.hi\n\t"
6468 "ADD $dst, $tmp" %}
6469 ins_encode %{
6470 __ popcntl($dst$$Register, $src$$Register);
6471 __ popcntl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
6472 __ addl($dst$$Register, $tmp$$Register);
6473 %}
6474 ins_pipe(ialu_reg);
6475 %}
6477 // Note: Long.bitCount(long) returns an int.
6478 instruct popCountL_mem(eRegI dst, memory mem, eRegI tmp, eFlagsReg cr) %{
6479 predicate(UsePopCountInstruction);
6480 match(Set dst (PopCountL (LoadL mem)));
6481 effect(KILL cr, TEMP tmp, TEMP dst);
6483 format %{ "POPCNT $dst, $mem\n\t"
6484 "POPCNT $tmp, $mem+4\n\t"
6485 "ADD $dst, $tmp" %}
6486 ins_encode %{
6487 //__ popcntl($dst$$Register, $mem$$Address$$first);
6488 //__ popcntl($tmp$$Register, $mem$$Address$$second);
6489 __ popcntl($dst$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false));
6490 __ popcntl($tmp$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false));
6491 __ addl($dst$$Register, $tmp$$Register);
6492 %}
6493 ins_pipe(ialu_reg);
6494 %}
6497 //----------Load/Store/Move Instructions---------------------------------------
6498 //----------Load Instructions--------------------------------------------------
6499 // Load Byte (8bit signed)
6500 instruct loadB(xRegI dst, memory mem) %{
6501 match(Set dst (LoadB mem));
6503 ins_cost(125);
6504 format %{ "MOVSX8 $dst,$mem\t# byte" %}
6506 ins_encode %{
6507 __ movsbl($dst$$Register, $mem$$Address);
6508 %}
6510 ins_pipe(ialu_reg_mem);
6511 %}
6513 // Load Byte (8bit signed) into Long Register
6514 instruct loadB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6515 match(Set dst (ConvI2L (LoadB mem)));
6516 effect(KILL cr);
6518 ins_cost(375);
6519 format %{ "MOVSX8 $dst.lo,$mem\t# byte -> long\n\t"
6520 "MOV $dst.hi,$dst.lo\n\t"
6521 "SAR $dst.hi,7" %}
6523 ins_encode %{
6524 __ movsbl($dst$$Register, $mem$$Address);
6525 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6526 __ sarl(HIGH_FROM_LOW($dst$$Register), 7); // 24+1 MSB are already signed extended.
6527 %}
6529 ins_pipe(ialu_reg_mem);
6530 %}
6532 // Load Unsigned Byte (8bit UNsigned)
6533 instruct loadUB(xRegI dst, memory mem) %{
6534 match(Set dst (LoadUB mem));
6536 ins_cost(125);
6537 format %{ "MOVZX8 $dst,$mem\t# ubyte -> int" %}
6539 ins_encode %{
6540 __ movzbl($dst$$Register, $mem$$Address);
6541 %}
6543 ins_pipe(ialu_reg_mem);
6544 %}
6546 // Load Unsigned Byte (8 bit UNsigned) into Long Register
6547 instruct loadUB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6548 match(Set dst (ConvI2L (LoadUB mem)));
6549 effect(KILL cr);
6551 ins_cost(250);
6552 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte -> long\n\t"
6553 "XOR $dst.hi,$dst.hi" %}
6555 ins_encode %{
6556 Register Rdst = $dst$$Register;
6557 __ movzbl(Rdst, $mem$$Address);
6558 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6559 %}
6561 ins_pipe(ialu_reg_mem);
6562 %}
6564 // Load Unsigned Byte (8 bit UNsigned) with mask into Long Register
6565 instruct loadUB2L_immI8(eRegL dst, memory mem, immI8 mask, eFlagsReg cr) %{
6566 match(Set dst (ConvI2L (AndI (LoadUB mem) mask)));
6567 effect(KILL cr);
6569 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte & 8-bit mask -> long\n\t"
6570 "XOR $dst.hi,$dst.hi\n\t"
6571 "AND $dst.lo,$mask" %}
6572 ins_encode %{
6573 Register Rdst = $dst$$Register;
6574 __ movzbl(Rdst, $mem$$Address);
6575 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6576 __ andl(Rdst, $mask$$constant);
6577 %}
6578 ins_pipe(ialu_reg_mem);
6579 %}
6581 // Load Short (16bit signed)
6582 instruct loadS(eRegI dst, memory mem) %{
6583 match(Set dst (LoadS mem));
6585 ins_cost(125);
6586 format %{ "MOVSX $dst,$mem\t# short" %}
6588 ins_encode %{
6589 __ movswl($dst$$Register, $mem$$Address);
6590 %}
6592 ins_pipe(ialu_reg_mem);
6593 %}
6595 // Load Short (16 bit signed) to Byte (8 bit signed)
6596 instruct loadS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6597 match(Set dst (RShiftI (LShiftI (LoadS mem) twentyfour) twentyfour));
6599 ins_cost(125);
6600 format %{ "MOVSX $dst, $mem\t# short -> byte" %}
6601 ins_encode %{
6602 __ movsbl($dst$$Register, $mem$$Address);
6603 %}
6604 ins_pipe(ialu_reg_mem);
6605 %}
6607 // Load Short (16bit signed) into Long Register
6608 instruct loadS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6609 match(Set dst (ConvI2L (LoadS mem)));
6610 effect(KILL cr);
6612 ins_cost(375);
6613 format %{ "MOVSX $dst.lo,$mem\t# short -> long\n\t"
6614 "MOV $dst.hi,$dst.lo\n\t"
6615 "SAR $dst.hi,15" %}
6617 ins_encode %{
6618 __ movswl($dst$$Register, $mem$$Address);
6619 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6620 __ sarl(HIGH_FROM_LOW($dst$$Register), 15); // 16+1 MSB are already signed extended.
6621 %}
6623 ins_pipe(ialu_reg_mem);
6624 %}
6626 // Load Unsigned Short/Char (16bit unsigned)
6627 instruct loadUS(eRegI dst, memory mem) %{
6628 match(Set dst (LoadUS mem));
6630 ins_cost(125);
6631 format %{ "MOVZX $dst,$mem\t# ushort/char -> int" %}
6633 ins_encode %{
6634 __ movzwl($dst$$Register, $mem$$Address);
6635 %}
6637 ins_pipe(ialu_reg_mem);
6638 %}
6640 // Load Unsigned Short/Char (16 bit UNsigned) to Byte (8 bit signed)
6641 instruct loadUS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6642 match(Set dst (RShiftI (LShiftI (LoadUS mem) twentyfour) twentyfour));
6644 ins_cost(125);
6645 format %{ "MOVSX $dst, $mem\t# ushort -> byte" %}
6646 ins_encode %{
6647 __ movsbl($dst$$Register, $mem$$Address);
6648 %}
6649 ins_pipe(ialu_reg_mem);
6650 %}
6652 // Load Unsigned Short/Char (16 bit UNsigned) into Long Register
6653 instruct loadUS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6654 match(Set dst (ConvI2L (LoadUS mem)));
6655 effect(KILL cr);
6657 ins_cost(250);
6658 format %{ "MOVZX $dst.lo,$mem\t# ushort/char -> long\n\t"
6659 "XOR $dst.hi,$dst.hi" %}
6661 ins_encode %{
6662 __ movzwl($dst$$Register, $mem$$Address);
6663 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6664 %}
6666 ins_pipe(ialu_reg_mem);
6667 %}
6669 // Load Unsigned Short/Char (16 bit UNsigned) with mask 0xFF into Long Register
6670 instruct loadUS2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6671 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6672 effect(KILL cr);
6674 format %{ "MOVZX8 $dst.lo,$mem\t# ushort/char & 0xFF -> long\n\t"
6675 "XOR $dst.hi,$dst.hi" %}
6676 ins_encode %{
6677 Register Rdst = $dst$$Register;
6678 __ movzbl(Rdst, $mem$$Address);
6679 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6680 %}
6681 ins_pipe(ialu_reg_mem);
6682 %}
6684 // Load Unsigned Short/Char (16 bit UNsigned) with a 16-bit mask into Long Register
6685 instruct loadUS2L_immI16(eRegL dst, memory mem, immI16 mask, eFlagsReg cr) %{
6686 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6687 effect(KILL cr);
6689 format %{ "MOVZX $dst.lo, $mem\t# ushort/char & 16-bit mask -> long\n\t"
6690 "XOR $dst.hi,$dst.hi\n\t"
6691 "AND $dst.lo,$mask" %}
6692 ins_encode %{
6693 Register Rdst = $dst$$Register;
6694 __ movzwl(Rdst, $mem$$Address);
6695 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6696 __ andl(Rdst, $mask$$constant);
6697 %}
6698 ins_pipe(ialu_reg_mem);
6699 %}
6701 // Load Integer
6702 instruct loadI(eRegI dst, memory mem) %{
6703 match(Set dst (LoadI mem));
6705 ins_cost(125);
6706 format %{ "MOV $dst,$mem\t# int" %}
6708 ins_encode %{
6709 __ movl($dst$$Register, $mem$$Address);
6710 %}
6712 ins_pipe(ialu_reg_mem);
6713 %}
6715 // Load Integer (32 bit signed) to Byte (8 bit signed)
6716 instruct loadI2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6717 match(Set dst (RShiftI (LShiftI (LoadI mem) twentyfour) twentyfour));
6719 ins_cost(125);
6720 format %{ "MOVSX $dst, $mem\t# int -> byte" %}
6721 ins_encode %{
6722 __ movsbl($dst$$Register, $mem$$Address);
6723 %}
6724 ins_pipe(ialu_reg_mem);
6725 %}
6727 // Load Integer (32 bit signed) to Unsigned Byte (8 bit UNsigned)
6728 instruct loadI2UB(eRegI dst, memory mem, immI_255 mask) %{
6729 match(Set dst (AndI (LoadI mem) mask));
6731 ins_cost(125);
6732 format %{ "MOVZX $dst, $mem\t# int -> ubyte" %}
6733 ins_encode %{
6734 __ movzbl($dst$$Register, $mem$$Address);
6735 %}
6736 ins_pipe(ialu_reg_mem);
6737 %}
6739 // Load Integer (32 bit signed) to Short (16 bit signed)
6740 instruct loadI2S(eRegI dst, memory mem, immI_16 sixteen) %{
6741 match(Set dst (RShiftI (LShiftI (LoadI mem) sixteen) sixteen));
6743 ins_cost(125);
6744 format %{ "MOVSX $dst, $mem\t# int -> short" %}
6745 ins_encode %{
6746 __ movswl($dst$$Register, $mem$$Address);
6747 %}
6748 ins_pipe(ialu_reg_mem);
6749 %}
6751 // Load Integer (32 bit signed) to Unsigned Short/Char (16 bit UNsigned)
6752 instruct loadI2US(eRegI dst, memory mem, immI_65535 mask) %{
6753 match(Set dst (AndI (LoadI mem) mask));
6755 ins_cost(125);
6756 format %{ "MOVZX $dst, $mem\t# int -> ushort/char" %}
6757 ins_encode %{
6758 __ movzwl($dst$$Register, $mem$$Address);
6759 %}
6760 ins_pipe(ialu_reg_mem);
6761 %}
6763 // Load Integer into Long Register
6764 instruct loadI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6765 match(Set dst (ConvI2L (LoadI mem)));
6766 effect(KILL cr);
6768 ins_cost(375);
6769 format %{ "MOV $dst.lo,$mem\t# int -> long\n\t"
6770 "MOV $dst.hi,$dst.lo\n\t"
6771 "SAR $dst.hi,31" %}
6773 ins_encode %{
6774 __ movl($dst$$Register, $mem$$Address);
6775 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6776 __ sarl(HIGH_FROM_LOW($dst$$Register), 31);
6777 %}
6779 ins_pipe(ialu_reg_mem);
6780 %}
6782 // Load Integer with mask 0xFF into Long Register
6783 instruct loadI2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6784 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6785 effect(KILL cr);
6787 format %{ "MOVZX8 $dst.lo,$mem\t# int & 0xFF -> long\n\t"
6788 "XOR $dst.hi,$dst.hi" %}
6789 ins_encode %{
6790 Register Rdst = $dst$$Register;
6791 __ movzbl(Rdst, $mem$$Address);
6792 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6793 %}
6794 ins_pipe(ialu_reg_mem);
6795 %}
6797 // Load Integer with mask 0xFFFF into Long Register
6798 instruct loadI2L_immI_65535(eRegL dst, memory mem, immI_65535 mask, eFlagsReg cr) %{
6799 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6800 effect(KILL cr);
6802 format %{ "MOVZX $dst.lo,$mem\t# int & 0xFFFF -> long\n\t"
6803 "XOR $dst.hi,$dst.hi" %}
6804 ins_encode %{
6805 Register Rdst = $dst$$Register;
6806 __ movzwl(Rdst, $mem$$Address);
6807 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6808 %}
6809 ins_pipe(ialu_reg_mem);
6810 %}
6812 // Load Integer with 32-bit mask into Long Register
6813 instruct loadI2L_immI(eRegL dst, memory mem, immI mask, eFlagsReg cr) %{
6814 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6815 effect(KILL cr);
6817 format %{ "MOV $dst.lo,$mem\t# int & 32-bit mask -> long\n\t"
6818 "XOR $dst.hi,$dst.hi\n\t"
6819 "AND $dst.lo,$mask" %}
6820 ins_encode %{
6821 Register Rdst = $dst$$Register;
6822 __ movl(Rdst, $mem$$Address);
6823 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6824 __ andl(Rdst, $mask$$constant);
6825 %}
6826 ins_pipe(ialu_reg_mem);
6827 %}
6829 // Load Unsigned Integer into Long Register
6830 instruct loadUI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6831 match(Set dst (LoadUI2L mem));
6832 effect(KILL cr);
6834 ins_cost(250);
6835 format %{ "MOV $dst.lo,$mem\t# uint -> long\n\t"
6836 "XOR $dst.hi,$dst.hi" %}
6838 ins_encode %{
6839 __ movl($dst$$Register, $mem$$Address);
6840 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6841 %}
6843 ins_pipe(ialu_reg_mem);
6844 %}
6846 // Load Long. Cannot clobber address while loading, so restrict address
6847 // register to ESI
6848 instruct loadL(eRegL dst, load_long_memory mem) %{
6849 predicate(!((LoadLNode*)n)->require_atomic_access());
6850 match(Set dst (LoadL mem));
6852 ins_cost(250);
6853 format %{ "MOV $dst.lo,$mem\t# long\n\t"
6854 "MOV $dst.hi,$mem+4" %}
6856 ins_encode %{
6857 Address Amemlo = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false);
6858 Address Amemhi = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false);
6859 __ movl($dst$$Register, Amemlo);
6860 __ movl(HIGH_FROM_LOW($dst$$Register), Amemhi);
6861 %}
6863 ins_pipe(ialu_reg_long_mem);
6864 %}
6866 // Volatile Load Long. Must be atomic, so do 64-bit FILD
6867 // then store it down to the stack and reload on the int
6868 // side.
6869 instruct loadL_volatile(stackSlotL dst, memory mem) %{
6870 predicate(UseSSE<=1 && ((LoadLNode*)n)->require_atomic_access());
6871 match(Set dst (LoadL mem));
6873 ins_cost(200);
6874 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
6875 "FISTp $dst" %}
6876 ins_encode(enc_loadL_volatile(mem,dst));
6877 ins_pipe( fpu_reg_mem );
6878 %}
6880 instruct loadLX_volatile(stackSlotL dst, memory mem, regXD tmp) %{
6881 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6882 match(Set dst (LoadL mem));
6883 effect(TEMP tmp);
6884 ins_cost(180);
6885 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6886 "MOVSD $dst,$tmp" %}
6887 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
6888 ins_pipe( pipe_slow );
6889 %}
6891 instruct loadLX_reg_volatile(eRegL dst, memory mem, regXD tmp) %{
6892 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6893 match(Set dst (LoadL mem));
6894 effect(TEMP tmp);
6895 ins_cost(160);
6896 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6897 "MOVD $dst.lo,$tmp\n\t"
6898 "PSRLQ $tmp,32\n\t"
6899 "MOVD $dst.hi,$tmp" %}
6900 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
6901 ins_pipe( pipe_slow );
6902 %}
6904 // Load Range
6905 instruct loadRange(eRegI dst, memory mem) %{
6906 match(Set dst (LoadRange mem));
6908 ins_cost(125);
6909 format %{ "MOV $dst,$mem" %}
6910 opcode(0x8B);
6911 ins_encode( OpcP, RegMem(dst,mem));
6912 ins_pipe( ialu_reg_mem );
6913 %}
6916 // Load Pointer
6917 instruct loadP(eRegP dst, memory mem) %{
6918 match(Set dst (LoadP mem));
6920 ins_cost(125);
6921 format %{ "MOV $dst,$mem" %}
6922 opcode(0x8B);
6923 ins_encode( OpcP, RegMem(dst,mem));
6924 ins_pipe( ialu_reg_mem );
6925 %}
6927 // Load Klass Pointer
6928 instruct loadKlass(eRegP dst, memory mem) %{
6929 match(Set dst (LoadKlass mem));
6931 ins_cost(125);
6932 format %{ "MOV $dst,$mem" %}
6933 opcode(0x8B);
6934 ins_encode( OpcP, RegMem(dst,mem));
6935 ins_pipe( ialu_reg_mem );
6936 %}
6938 // Load Double
6939 instruct loadD(regD dst, memory mem) %{
6940 predicate(UseSSE<=1);
6941 match(Set dst (LoadD mem));
6943 ins_cost(150);
6944 format %{ "FLD_D ST,$mem\n\t"
6945 "FSTP $dst" %}
6946 opcode(0xDD); /* DD /0 */
6947 ins_encode( OpcP, RMopc_Mem(0x00,mem),
6948 Pop_Reg_D(dst) );
6949 ins_pipe( fpu_reg_mem );
6950 %}
6952 // Load Double to XMM
6953 instruct loadXD(regXD dst, memory mem) %{
6954 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
6955 match(Set dst (LoadD mem));
6956 ins_cost(145);
6957 format %{ "MOVSD $dst,$mem" %}
6958 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
6959 ins_pipe( pipe_slow );
6960 %}
6962 instruct loadXD_partial(regXD dst, memory mem) %{
6963 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
6964 match(Set dst (LoadD mem));
6965 ins_cost(145);
6966 format %{ "MOVLPD $dst,$mem" %}
6967 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,mem));
6968 ins_pipe( pipe_slow );
6969 %}
6971 // Load to XMM register (single-precision floating point)
6972 // MOVSS instruction
6973 instruct loadX(regX dst, memory mem) %{
6974 predicate(UseSSE>=1);
6975 match(Set dst (LoadF mem));
6976 ins_cost(145);
6977 format %{ "MOVSS $dst,$mem" %}
6978 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
6979 ins_pipe( pipe_slow );
6980 %}
6982 // Load Float
6983 instruct loadF(regF dst, memory mem) %{
6984 predicate(UseSSE==0);
6985 match(Set dst (LoadF mem));
6987 ins_cost(150);
6988 format %{ "FLD_S ST,$mem\n\t"
6989 "FSTP $dst" %}
6990 opcode(0xD9); /* D9 /0 */
6991 ins_encode( OpcP, RMopc_Mem(0x00,mem),
6992 Pop_Reg_F(dst) );
6993 ins_pipe( fpu_reg_mem );
6994 %}
6996 // Load Aligned Packed Byte to XMM register
6997 instruct loadA8B(regXD dst, memory mem) %{
6998 predicate(UseSSE>=1);
6999 match(Set dst (Load8B mem));
7000 ins_cost(125);
7001 format %{ "MOVQ $dst,$mem\t! packed8B" %}
7002 ins_encode( movq_ld(dst, mem));
7003 ins_pipe( pipe_slow );
7004 %}
7006 // Load Aligned Packed Short to XMM register
7007 instruct loadA4S(regXD dst, memory mem) %{
7008 predicate(UseSSE>=1);
7009 match(Set dst (Load4S mem));
7010 ins_cost(125);
7011 format %{ "MOVQ $dst,$mem\t! packed4S" %}
7012 ins_encode( movq_ld(dst, mem));
7013 ins_pipe( pipe_slow );
7014 %}
7016 // Load Aligned Packed Char to XMM register
7017 instruct loadA4C(regXD dst, memory mem) %{
7018 predicate(UseSSE>=1);
7019 match(Set dst (Load4C mem));
7020 ins_cost(125);
7021 format %{ "MOVQ $dst,$mem\t! packed4C" %}
7022 ins_encode( movq_ld(dst, mem));
7023 ins_pipe( pipe_slow );
7024 %}
7026 // Load Aligned Packed Integer to XMM register
7027 instruct load2IU(regXD dst, memory mem) %{
7028 predicate(UseSSE>=1);
7029 match(Set dst (Load2I mem));
7030 ins_cost(125);
7031 format %{ "MOVQ $dst,$mem\t! packed2I" %}
7032 ins_encode( movq_ld(dst, mem));
7033 ins_pipe( pipe_slow );
7034 %}
7036 // Load Aligned Packed Single to XMM
7037 instruct loadA2F(regXD dst, memory mem) %{
7038 predicate(UseSSE>=1);
7039 match(Set dst (Load2F mem));
7040 ins_cost(145);
7041 format %{ "MOVQ $dst,$mem\t! packed2F" %}
7042 ins_encode( movq_ld(dst, mem));
7043 ins_pipe( pipe_slow );
7044 %}
7046 // Load Effective Address
7047 instruct leaP8(eRegP dst, indOffset8 mem) %{
7048 match(Set dst mem);
7050 ins_cost(110);
7051 format %{ "LEA $dst,$mem" %}
7052 opcode(0x8D);
7053 ins_encode( OpcP, RegMem(dst,mem));
7054 ins_pipe( ialu_reg_reg_fat );
7055 %}
7057 instruct leaP32(eRegP dst, indOffset32 mem) %{
7058 match(Set dst mem);
7060 ins_cost(110);
7061 format %{ "LEA $dst,$mem" %}
7062 opcode(0x8D);
7063 ins_encode( OpcP, RegMem(dst,mem));
7064 ins_pipe( ialu_reg_reg_fat );
7065 %}
7067 instruct leaPIdxOff(eRegP dst, indIndexOffset mem) %{
7068 match(Set dst mem);
7070 ins_cost(110);
7071 format %{ "LEA $dst,$mem" %}
7072 opcode(0x8D);
7073 ins_encode( OpcP, RegMem(dst,mem));
7074 ins_pipe( ialu_reg_reg_fat );
7075 %}
7077 instruct leaPIdxScale(eRegP dst, indIndexScale mem) %{
7078 match(Set dst mem);
7080 ins_cost(110);
7081 format %{ "LEA $dst,$mem" %}
7082 opcode(0x8D);
7083 ins_encode( OpcP, RegMem(dst,mem));
7084 ins_pipe( ialu_reg_reg_fat );
7085 %}
7087 instruct leaPIdxScaleOff(eRegP dst, indIndexScaleOffset mem) %{
7088 match(Set dst mem);
7090 ins_cost(110);
7091 format %{ "LEA $dst,$mem" %}
7092 opcode(0x8D);
7093 ins_encode( OpcP, RegMem(dst,mem));
7094 ins_pipe( ialu_reg_reg_fat );
7095 %}
7097 // Load Constant
7098 instruct loadConI(eRegI dst, immI src) %{
7099 match(Set dst src);
7101 format %{ "MOV $dst,$src" %}
7102 ins_encode( LdImmI(dst, src) );
7103 ins_pipe( ialu_reg_fat );
7104 %}
7106 // Load Constant zero
7107 instruct loadConI0(eRegI dst, immI0 src, eFlagsReg cr) %{
7108 match(Set dst src);
7109 effect(KILL cr);
7111 ins_cost(50);
7112 format %{ "XOR $dst,$dst" %}
7113 opcode(0x33); /* + rd */
7114 ins_encode( OpcP, RegReg( dst, dst ) );
7115 ins_pipe( ialu_reg );
7116 %}
7118 instruct loadConP(eRegP dst, immP src) %{
7119 match(Set dst src);
7121 format %{ "MOV $dst,$src" %}
7122 opcode(0xB8); /* + rd */
7123 ins_encode( LdImmP(dst, src) );
7124 ins_pipe( ialu_reg_fat );
7125 %}
7127 instruct loadConL(eRegL dst, immL src, eFlagsReg cr) %{
7128 match(Set dst src);
7129 effect(KILL cr);
7130 ins_cost(200);
7131 format %{ "MOV $dst.lo,$src.lo\n\t"
7132 "MOV $dst.hi,$src.hi" %}
7133 opcode(0xB8);
7134 ins_encode( LdImmL_Lo(dst, src), LdImmL_Hi(dst, src) );
7135 ins_pipe( ialu_reg_long_fat );
7136 %}
7138 instruct loadConL0(eRegL dst, immL0 src, eFlagsReg cr) %{
7139 match(Set dst src);
7140 effect(KILL cr);
7141 ins_cost(150);
7142 format %{ "XOR $dst.lo,$dst.lo\n\t"
7143 "XOR $dst.hi,$dst.hi" %}
7144 opcode(0x33,0x33);
7145 ins_encode( RegReg_Lo(dst,dst), RegReg_Hi(dst, dst) );
7146 ins_pipe( ialu_reg_long );
7147 %}
7149 // The instruction usage is guarded by predicate in operand immF().
7150 instruct loadConF(regF dst, immF con) %{
7151 match(Set dst con);
7152 ins_cost(125);
7153 format %{ "FLD_S ST,[$constantaddress]\t# load from constant table: float=$con\n\t"
7154 "FSTP $dst" %}
7155 ins_encode %{
7156 __ fld_s($constantaddress($con));
7157 __ fstp_d($dst$$reg);
7158 %}
7159 ins_pipe(fpu_reg_con);
7160 %}
7162 // The instruction usage is guarded by predicate in operand immF0().
7163 instruct loadConF0(regF dst, immF0 con) %{
7164 match(Set dst con);
7165 ins_cost(125);
7166 format %{ "FLDZ ST\n\t"
7167 "FSTP $dst" %}
7168 ins_encode %{
7169 __ fldz();
7170 __ fstp_d($dst$$reg);
7171 %}
7172 ins_pipe(fpu_reg_con);
7173 %}
7175 // The instruction usage is guarded by predicate in operand immF1().
7176 instruct loadConF1(regF dst, immF1 con) %{
7177 match(Set dst con);
7178 ins_cost(125);
7179 format %{ "FLD1 ST\n\t"
7180 "FSTP $dst" %}
7181 ins_encode %{
7182 __ fld1();
7183 __ fstp_d($dst$$reg);
7184 %}
7185 ins_pipe(fpu_reg_con);
7186 %}
7188 // The instruction usage is guarded by predicate in operand immXF().
7189 instruct loadConX(regX dst, immXF con) %{
7190 match(Set dst con);
7191 ins_cost(125);
7192 format %{ "MOVSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
7193 ins_encode %{
7194 __ movflt($dst$$XMMRegister, $constantaddress($con));
7195 %}
7196 ins_pipe(pipe_slow);
7197 %}
7199 // The instruction usage is guarded by predicate in operand immXF0().
7200 instruct loadConX0(regX dst, immXF0 src) %{
7201 match(Set dst src);
7202 ins_cost(100);
7203 format %{ "XORPS $dst,$dst\t# float 0.0" %}
7204 ins_encode %{
7205 __ xorps($dst$$XMMRegister, $dst$$XMMRegister);
7206 %}
7207 ins_pipe(pipe_slow);
7208 %}
7210 // The instruction usage is guarded by predicate in operand immD().
7211 instruct loadConD(regD dst, immD con) %{
7212 match(Set dst con);
7213 ins_cost(125);
7215 format %{ "FLD_D ST,[$constantaddress]\t# load from constant table: double=$con\n\t"
7216 "FSTP $dst" %}
7217 ins_encode %{
7218 __ fld_d($constantaddress($con));
7219 __ fstp_d($dst$$reg);
7220 %}
7221 ins_pipe(fpu_reg_con);
7222 %}
7224 // The instruction usage is guarded by predicate in operand immD0().
7225 instruct loadConD0(regD dst, immD0 con) %{
7226 match(Set dst con);
7227 ins_cost(125);
7229 format %{ "FLDZ ST\n\t"
7230 "FSTP $dst" %}
7231 ins_encode %{
7232 __ fldz();
7233 __ fstp_d($dst$$reg);
7234 %}
7235 ins_pipe(fpu_reg_con);
7236 %}
7238 // The instruction usage is guarded by predicate in operand immD1().
7239 instruct loadConD1(regD dst, immD1 con) %{
7240 match(Set dst con);
7241 ins_cost(125);
7243 format %{ "FLD1 ST\n\t"
7244 "FSTP $dst" %}
7245 ins_encode %{
7246 __ fld1();
7247 __ fstp_d($dst$$reg);
7248 %}
7249 ins_pipe(fpu_reg_con);
7250 %}
7252 // The instruction usage is guarded by predicate in operand immXD().
7253 instruct loadConXD(regXD dst, immXD con) %{
7254 match(Set dst con);
7255 ins_cost(125);
7256 format %{ "MOVSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
7257 ins_encode %{
7258 __ movdbl($dst$$XMMRegister, $constantaddress($con));
7259 %}
7260 ins_pipe(pipe_slow);
7261 %}
7263 // The instruction usage is guarded by predicate in operand immXD0().
7264 instruct loadConXD0(regXD dst, immXD0 src) %{
7265 match(Set dst src);
7266 ins_cost(100);
7267 format %{ "XORPD $dst,$dst\t# double 0.0" %}
7268 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x57), RegReg(dst,dst));
7269 ins_pipe( pipe_slow );
7270 %}
7272 // Load Stack Slot
7273 instruct loadSSI(eRegI dst, stackSlotI src) %{
7274 match(Set dst src);
7275 ins_cost(125);
7277 format %{ "MOV $dst,$src" %}
7278 opcode(0x8B);
7279 ins_encode( OpcP, RegMem(dst,src));
7280 ins_pipe( ialu_reg_mem );
7281 %}
7283 instruct loadSSL(eRegL dst, stackSlotL src) %{
7284 match(Set dst src);
7286 ins_cost(200);
7287 format %{ "MOV $dst,$src.lo\n\t"
7288 "MOV $dst+4,$src.hi" %}
7289 opcode(0x8B, 0x8B);
7290 ins_encode( OpcP, RegMem( dst, src ), OpcS, RegMem_Hi( dst, src ) );
7291 ins_pipe( ialu_mem_long_reg );
7292 %}
7294 // Load Stack Slot
7295 instruct loadSSP(eRegP dst, stackSlotP src) %{
7296 match(Set dst src);
7297 ins_cost(125);
7299 format %{ "MOV $dst,$src" %}
7300 opcode(0x8B);
7301 ins_encode( OpcP, RegMem(dst,src));
7302 ins_pipe( ialu_reg_mem );
7303 %}
7305 // Load Stack Slot
7306 instruct loadSSF(regF dst, stackSlotF src) %{
7307 match(Set dst src);
7308 ins_cost(125);
7310 format %{ "FLD_S $src\n\t"
7311 "FSTP $dst" %}
7312 opcode(0xD9); /* D9 /0, FLD m32real */
7313 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7314 Pop_Reg_F(dst) );
7315 ins_pipe( fpu_reg_mem );
7316 %}
7318 // Load Stack Slot
7319 instruct loadSSD(regD dst, stackSlotD src) %{
7320 match(Set dst src);
7321 ins_cost(125);
7323 format %{ "FLD_D $src\n\t"
7324 "FSTP $dst" %}
7325 opcode(0xDD); /* DD /0, FLD m64real */
7326 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7327 Pop_Reg_D(dst) );
7328 ins_pipe( fpu_reg_mem );
7329 %}
7331 // Prefetch instructions.
7332 // Must be safe to execute with invalid address (cannot fault).
7334 instruct prefetchr0( memory mem ) %{
7335 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
7336 match(PrefetchRead mem);
7337 ins_cost(0);
7338 size(0);
7339 format %{ "PREFETCHR (non-SSE is empty encoding)" %}
7340 ins_encode();
7341 ins_pipe(empty);
7342 %}
7344 instruct prefetchr( memory mem ) %{
7345 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch() || ReadPrefetchInstr==3);
7346 match(PrefetchRead mem);
7347 ins_cost(100);
7349 format %{ "PREFETCHR $mem\t! Prefetch into level 1 cache for read" %}
7350 opcode(0x0F, 0x0d); /* Opcode 0F 0d /0 */
7351 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7352 ins_pipe(ialu_mem);
7353 %}
7355 instruct prefetchrNTA( memory mem ) %{
7356 predicate(UseSSE>=1 && ReadPrefetchInstr==0);
7357 match(PrefetchRead mem);
7358 ins_cost(100);
7360 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for read" %}
7361 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7362 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7363 ins_pipe(ialu_mem);
7364 %}
7366 instruct prefetchrT0( memory mem ) %{
7367 predicate(UseSSE>=1 && ReadPrefetchInstr==1);
7368 match(PrefetchRead mem);
7369 ins_cost(100);
7371 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for read" %}
7372 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7373 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7374 ins_pipe(ialu_mem);
7375 %}
7377 instruct prefetchrT2( memory mem ) %{
7378 predicate(UseSSE>=1 && ReadPrefetchInstr==2);
7379 match(PrefetchRead mem);
7380 ins_cost(100);
7382 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for read" %}
7383 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7384 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7385 ins_pipe(ialu_mem);
7386 %}
7388 instruct prefetchw0( memory mem ) %{
7389 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
7390 match(PrefetchWrite mem);
7391 ins_cost(0);
7392 size(0);
7393 format %{ "Prefetch (non-SSE is empty encoding)" %}
7394 ins_encode();
7395 ins_pipe(empty);
7396 %}
7398 instruct prefetchw( memory mem ) %{
7399 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch() || AllocatePrefetchInstr==3);
7400 match( PrefetchWrite mem );
7401 ins_cost(100);
7403 format %{ "PREFETCHW $mem\t! Prefetch into L1 cache and mark modified" %}
7404 opcode(0x0F, 0x0D); /* Opcode 0F 0D /1 */
7405 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7406 ins_pipe(ialu_mem);
7407 %}
7409 instruct prefetchwNTA( memory mem ) %{
7410 predicate(UseSSE>=1 && AllocatePrefetchInstr==0);
7411 match(PrefetchWrite mem);
7412 ins_cost(100);
7414 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for write" %}
7415 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7416 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7417 ins_pipe(ialu_mem);
7418 %}
7420 instruct prefetchwT0( memory mem ) %{
7421 predicate(UseSSE>=1 && AllocatePrefetchInstr==1);
7422 match(PrefetchWrite mem);
7423 ins_cost(100);
7425 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for write" %}
7426 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7427 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7428 ins_pipe(ialu_mem);
7429 %}
7431 instruct prefetchwT2( memory mem ) %{
7432 predicate(UseSSE>=1 && AllocatePrefetchInstr==2);
7433 match(PrefetchWrite mem);
7434 ins_cost(100);
7436 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for write" %}
7437 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7438 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7439 ins_pipe(ialu_mem);
7440 %}
7442 //----------Store Instructions-------------------------------------------------
7444 // Store Byte
7445 instruct storeB(memory mem, xRegI src) %{
7446 match(Set mem (StoreB mem src));
7448 ins_cost(125);
7449 format %{ "MOV8 $mem,$src" %}
7450 opcode(0x88);
7451 ins_encode( OpcP, RegMem( src, mem ) );
7452 ins_pipe( ialu_mem_reg );
7453 %}
7455 // Store Char/Short
7456 instruct storeC(memory mem, eRegI src) %{
7457 match(Set mem (StoreC mem src));
7459 ins_cost(125);
7460 format %{ "MOV16 $mem,$src" %}
7461 opcode(0x89, 0x66);
7462 ins_encode( OpcS, OpcP, RegMem( src, mem ) );
7463 ins_pipe( ialu_mem_reg );
7464 %}
7466 // Store Integer
7467 instruct storeI(memory mem, eRegI src) %{
7468 match(Set mem (StoreI mem src));
7470 ins_cost(125);
7471 format %{ "MOV $mem,$src" %}
7472 opcode(0x89);
7473 ins_encode( OpcP, RegMem( src, mem ) );
7474 ins_pipe( ialu_mem_reg );
7475 %}
7477 // Store Long
7478 instruct storeL(long_memory mem, eRegL src) %{
7479 predicate(!((StoreLNode*)n)->require_atomic_access());
7480 match(Set mem (StoreL mem src));
7482 ins_cost(200);
7483 format %{ "MOV $mem,$src.lo\n\t"
7484 "MOV $mem+4,$src.hi" %}
7485 opcode(0x89, 0x89);
7486 ins_encode( OpcP, RegMem( src, mem ), OpcS, RegMem_Hi( src, mem ) );
7487 ins_pipe( ialu_mem_long_reg );
7488 %}
7490 // Store Long to Integer
7491 instruct storeL2I(memory mem, eRegL src) %{
7492 match(Set mem (StoreI mem (ConvL2I src)));
7494 format %{ "MOV $mem,$src.lo\t# long -> int" %}
7495 ins_encode %{
7496 __ movl($mem$$Address, $src$$Register);
7497 %}
7498 ins_pipe(ialu_mem_reg);
7499 %}
7501 // Volatile Store Long. Must be atomic, so move it into
7502 // the FP TOS and then do a 64-bit FIST. Has to probe the
7503 // target address before the store (for null-ptr checks)
7504 // so the memory operand is used twice in the encoding.
7505 instruct storeL_volatile(memory mem, stackSlotL src, eFlagsReg cr ) %{
7506 predicate(UseSSE<=1 && ((StoreLNode*)n)->require_atomic_access());
7507 match(Set mem (StoreL mem src));
7508 effect( KILL cr );
7509 ins_cost(400);
7510 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7511 "FILD $src\n\t"
7512 "FISTp $mem\t # 64-bit atomic volatile long store" %}
7513 opcode(0x3B);
7514 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeL_volatile(mem,src));
7515 ins_pipe( fpu_reg_mem );
7516 %}
7518 instruct storeLX_volatile(memory mem, stackSlotL src, regXD tmp, eFlagsReg cr) %{
7519 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7520 match(Set mem (StoreL mem src));
7521 effect( TEMP tmp, KILL cr );
7522 ins_cost(380);
7523 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7524 "MOVSD $tmp,$src\n\t"
7525 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7526 opcode(0x3B);
7527 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_volatile(mem, src, tmp));
7528 ins_pipe( pipe_slow );
7529 %}
7531 instruct storeLX_reg_volatile(memory mem, eRegL src, regXD tmp2, regXD tmp, eFlagsReg cr) %{
7532 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7533 match(Set mem (StoreL mem src));
7534 effect( TEMP tmp2 , TEMP tmp, KILL cr );
7535 ins_cost(360);
7536 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7537 "MOVD $tmp,$src.lo\n\t"
7538 "MOVD $tmp2,$src.hi\n\t"
7539 "PUNPCKLDQ $tmp,$tmp2\n\t"
7540 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7541 opcode(0x3B);
7542 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_reg_volatile(mem, src, tmp, tmp2));
7543 ins_pipe( pipe_slow );
7544 %}
7546 // Store Pointer; for storing unknown oops and raw pointers
7547 instruct storeP(memory mem, anyRegP src) %{
7548 match(Set mem (StoreP mem src));
7550 ins_cost(125);
7551 format %{ "MOV $mem,$src" %}
7552 opcode(0x89);
7553 ins_encode( OpcP, RegMem( src, mem ) );
7554 ins_pipe( ialu_mem_reg );
7555 %}
7557 // Store Integer Immediate
7558 instruct storeImmI(memory mem, immI src) %{
7559 match(Set mem (StoreI mem src));
7561 ins_cost(150);
7562 format %{ "MOV $mem,$src" %}
7563 opcode(0xC7); /* C7 /0 */
7564 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7565 ins_pipe( ialu_mem_imm );
7566 %}
7568 // Store Short/Char Immediate
7569 instruct storeImmI16(memory mem, immI16 src) %{
7570 predicate(UseStoreImmI16);
7571 match(Set mem (StoreC mem src));
7573 ins_cost(150);
7574 format %{ "MOV16 $mem,$src" %}
7575 opcode(0xC7); /* C7 /0 Same as 32 store immediate with prefix */
7576 ins_encode( SizePrefix, OpcP, RMopc_Mem(0x00,mem), Con16( src ));
7577 ins_pipe( ialu_mem_imm );
7578 %}
7580 // Store Pointer Immediate; null pointers or constant oops that do not
7581 // need card-mark barriers.
7582 instruct storeImmP(memory mem, immP src) %{
7583 match(Set mem (StoreP mem src));
7585 ins_cost(150);
7586 format %{ "MOV $mem,$src" %}
7587 opcode(0xC7); /* C7 /0 */
7588 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7589 ins_pipe( ialu_mem_imm );
7590 %}
7592 // Store Byte Immediate
7593 instruct storeImmB(memory mem, immI8 src) %{
7594 match(Set mem (StoreB mem src));
7596 ins_cost(150);
7597 format %{ "MOV8 $mem,$src" %}
7598 opcode(0xC6); /* C6 /0 */
7599 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7600 ins_pipe( ialu_mem_imm );
7601 %}
7603 // Store Aligned Packed Byte XMM register to memory
7604 instruct storeA8B(memory mem, regXD src) %{
7605 predicate(UseSSE>=1);
7606 match(Set mem (Store8B mem src));
7607 ins_cost(145);
7608 format %{ "MOVQ $mem,$src\t! packed8B" %}
7609 ins_encode( movq_st(mem, src));
7610 ins_pipe( pipe_slow );
7611 %}
7613 // Store Aligned Packed Char/Short XMM register to memory
7614 instruct storeA4C(memory mem, regXD src) %{
7615 predicate(UseSSE>=1);
7616 match(Set mem (Store4C mem src));
7617 ins_cost(145);
7618 format %{ "MOVQ $mem,$src\t! packed4C" %}
7619 ins_encode( movq_st(mem, src));
7620 ins_pipe( pipe_slow );
7621 %}
7623 // Store Aligned Packed Integer XMM register to memory
7624 instruct storeA2I(memory mem, regXD src) %{
7625 predicate(UseSSE>=1);
7626 match(Set mem (Store2I mem src));
7627 ins_cost(145);
7628 format %{ "MOVQ $mem,$src\t! packed2I" %}
7629 ins_encode( movq_st(mem, src));
7630 ins_pipe( pipe_slow );
7631 %}
7633 // Store CMS card-mark Immediate
7634 instruct storeImmCM(memory mem, immI8 src) %{
7635 match(Set mem (StoreCM mem src));
7637 ins_cost(150);
7638 format %{ "MOV8 $mem,$src\t! CMS card-mark imm0" %}
7639 opcode(0xC6); /* C6 /0 */
7640 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7641 ins_pipe( ialu_mem_imm );
7642 %}
7644 // Store Double
7645 instruct storeD( memory mem, regDPR1 src) %{
7646 predicate(UseSSE<=1);
7647 match(Set mem (StoreD mem src));
7649 ins_cost(100);
7650 format %{ "FST_D $mem,$src" %}
7651 opcode(0xDD); /* DD /2 */
7652 ins_encode( enc_FP_store(mem,src) );
7653 ins_pipe( fpu_mem_reg );
7654 %}
7656 // Store double does rounding on x86
7657 instruct storeD_rounded( memory mem, regDPR1 src) %{
7658 predicate(UseSSE<=1);
7659 match(Set mem (StoreD mem (RoundDouble src)));
7661 ins_cost(100);
7662 format %{ "FST_D $mem,$src\t# round" %}
7663 opcode(0xDD); /* DD /2 */
7664 ins_encode( enc_FP_store(mem,src) );
7665 ins_pipe( fpu_mem_reg );
7666 %}
7668 // Store XMM register to memory (double-precision floating points)
7669 // MOVSD instruction
7670 instruct storeXD(memory mem, regXD src) %{
7671 predicate(UseSSE>=2);
7672 match(Set mem (StoreD mem src));
7673 ins_cost(95);
7674 format %{ "MOVSD $mem,$src" %}
7675 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7676 ins_pipe( pipe_slow );
7677 %}
7679 // Store XMM register to memory (single-precision floating point)
7680 // MOVSS instruction
7681 instruct storeX(memory mem, regX src) %{
7682 predicate(UseSSE>=1);
7683 match(Set mem (StoreF mem src));
7684 ins_cost(95);
7685 format %{ "MOVSS $mem,$src" %}
7686 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7687 ins_pipe( pipe_slow );
7688 %}
7690 // Store Aligned Packed Single Float XMM register to memory
7691 instruct storeA2F(memory mem, regXD src) %{
7692 predicate(UseSSE>=1);
7693 match(Set mem (Store2F mem src));
7694 ins_cost(145);
7695 format %{ "MOVQ $mem,$src\t! packed2F" %}
7696 ins_encode( movq_st(mem, src));
7697 ins_pipe( pipe_slow );
7698 %}
7700 // Store Float
7701 instruct storeF( memory mem, regFPR1 src) %{
7702 predicate(UseSSE==0);
7703 match(Set mem (StoreF mem src));
7705 ins_cost(100);
7706 format %{ "FST_S $mem,$src" %}
7707 opcode(0xD9); /* D9 /2 */
7708 ins_encode( enc_FP_store(mem,src) );
7709 ins_pipe( fpu_mem_reg );
7710 %}
7712 // Store Float does rounding on x86
7713 instruct storeF_rounded( memory mem, regFPR1 src) %{
7714 predicate(UseSSE==0);
7715 match(Set mem (StoreF mem (RoundFloat src)));
7717 ins_cost(100);
7718 format %{ "FST_S $mem,$src\t# round" %}
7719 opcode(0xD9); /* D9 /2 */
7720 ins_encode( enc_FP_store(mem,src) );
7721 ins_pipe( fpu_mem_reg );
7722 %}
7724 // Store Float does rounding on x86
7725 instruct storeF_Drounded( memory mem, regDPR1 src) %{
7726 predicate(UseSSE<=1);
7727 match(Set mem (StoreF mem (ConvD2F src)));
7729 ins_cost(100);
7730 format %{ "FST_S $mem,$src\t# D-round" %}
7731 opcode(0xD9); /* D9 /2 */
7732 ins_encode( enc_FP_store(mem,src) );
7733 ins_pipe( fpu_mem_reg );
7734 %}
7736 // Store immediate Float value (it is faster than store from FPU register)
7737 // The instruction usage is guarded by predicate in operand immF().
7738 instruct storeF_imm( memory mem, immF src) %{
7739 match(Set mem (StoreF mem src));
7741 ins_cost(50);
7742 format %{ "MOV $mem,$src\t# store float" %}
7743 opcode(0xC7); /* C7 /0 */
7744 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32F_as_bits( src ));
7745 ins_pipe( ialu_mem_imm );
7746 %}
7748 // Store immediate Float value (it is faster than store from XMM register)
7749 // The instruction usage is guarded by predicate in operand immXF().
7750 instruct storeX_imm( memory mem, immXF src) %{
7751 match(Set mem (StoreF mem src));
7753 ins_cost(50);
7754 format %{ "MOV $mem,$src\t# store float" %}
7755 opcode(0xC7); /* C7 /0 */
7756 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32XF_as_bits( src ));
7757 ins_pipe( ialu_mem_imm );
7758 %}
7760 // Store Integer to stack slot
7761 instruct storeSSI(stackSlotI dst, eRegI src) %{
7762 match(Set dst src);
7764 ins_cost(100);
7765 format %{ "MOV $dst,$src" %}
7766 opcode(0x89);
7767 ins_encode( OpcPRegSS( dst, src ) );
7768 ins_pipe( ialu_mem_reg );
7769 %}
7771 // Store Integer to stack slot
7772 instruct storeSSP(stackSlotP dst, eRegP src) %{
7773 match(Set dst src);
7775 ins_cost(100);
7776 format %{ "MOV $dst,$src" %}
7777 opcode(0x89);
7778 ins_encode( OpcPRegSS( dst, src ) );
7779 ins_pipe( ialu_mem_reg );
7780 %}
7782 // Store Long to stack slot
7783 instruct storeSSL(stackSlotL dst, eRegL src) %{
7784 match(Set dst src);
7786 ins_cost(200);
7787 format %{ "MOV $dst,$src.lo\n\t"
7788 "MOV $dst+4,$src.hi" %}
7789 opcode(0x89, 0x89);
7790 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
7791 ins_pipe( ialu_mem_long_reg );
7792 %}
7794 //----------MemBar Instructions-----------------------------------------------
7795 // Memory barrier flavors
7797 instruct membar_acquire() %{
7798 match(MemBarAcquire);
7799 ins_cost(400);
7801 size(0);
7802 format %{ "MEMBAR-acquire ! (empty encoding)" %}
7803 ins_encode();
7804 ins_pipe(empty);
7805 %}
7807 instruct membar_acquire_lock() %{
7808 match(MemBarAcquire);
7809 predicate(Matcher::prior_fast_lock(n));
7810 ins_cost(0);
7812 size(0);
7813 format %{ "MEMBAR-acquire (prior CMPXCHG in FastLock so empty encoding)" %}
7814 ins_encode( );
7815 ins_pipe(empty);
7816 %}
7818 instruct membar_release() %{
7819 match(MemBarRelease);
7820 ins_cost(400);
7822 size(0);
7823 format %{ "MEMBAR-release ! (empty encoding)" %}
7824 ins_encode( );
7825 ins_pipe(empty);
7826 %}
7828 instruct membar_release_lock() %{
7829 match(MemBarRelease);
7830 predicate(Matcher::post_fast_unlock(n));
7831 ins_cost(0);
7833 size(0);
7834 format %{ "MEMBAR-release (a FastUnlock follows so empty encoding)" %}
7835 ins_encode( );
7836 ins_pipe(empty);
7837 %}
7839 instruct membar_volatile(eFlagsReg cr) %{
7840 match(MemBarVolatile);
7841 effect(KILL cr);
7842 ins_cost(400);
7844 format %{
7845 $$template
7846 if (os::is_MP()) {
7847 $$emit$$"LOCK ADDL [ESP + #0], 0\t! membar_volatile"
7848 } else {
7849 $$emit$$"MEMBAR-volatile ! (empty encoding)"
7850 }
7851 %}
7852 ins_encode %{
7853 __ membar(Assembler::StoreLoad);
7854 %}
7855 ins_pipe(pipe_slow);
7856 %}
7858 instruct unnecessary_membar_volatile() %{
7859 match(MemBarVolatile);
7860 predicate(Matcher::post_store_load_barrier(n));
7861 ins_cost(0);
7863 size(0);
7864 format %{ "MEMBAR-volatile (unnecessary so empty encoding)" %}
7865 ins_encode( );
7866 ins_pipe(empty);
7867 %}
7869 //----------Move Instructions--------------------------------------------------
7870 instruct castX2P(eAXRegP dst, eAXRegI src) %{
7871 match(Set dst (CastX2P src));
7872 format %{ "# X2P $dst, $src" %}
7873 ins_encode( /*empty encoding*/ );
7874 ins_cost(0);
7875 ins_pipe(empty);
7876 %}
7878 instruct castP2X(eRegI dst, eRegP src ) %{
7879 match(Set dst (CastP2X src));
7880 ins_cost(50);
7881 format %{ "MOV $dst, $src\t# CastP2X" %}
7882 ins_encode( enc_Copy( dst, src) );
7883 ins_pipe( ialu_reg_reg );
7884 %}
7886 //----------Conditional Move---------------------------------------------------
7887 // Conditional move
7888 instruct cmovI_reg(eRegI dst, eRegI src, eFlagsReg cr, cmpOp cop ) %{
7889 predicate(VM_Version::supports_cmov() );
7890 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7891 ins_cost(200);
7892 format %{ "CMOV$cop $dst,$src" %}
7893 opcode(0x0F,0x40);
7894 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7895 ins_pipe( pipe_cmov_reg );
7896 %}
7898 instruct cmovI_regU( cmpOpU cop, eFlagsRegU cr, eRegI dst, eRegI src ) %{
7899 predicate(VM_Version::supports_cmov() );
7900 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7901 ins_cost(200);
7902 format %{ "CMOV$cop $dst,$src" %}
7903 opcode(0x0F,0x40);
7904 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7905 ins_pipe( pipe_cmov_reg );
7906 %}
7908 instruct cmovI_regUCF( cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, eRegI src ) %{
7909 predicate(VM_Version::supports_cmov() );
7910 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7911 ins_cost(200);
7912 expand %{
7913 cmovI_regU(cop, cr, dst, src);
7914 %}
7915 %}
7917 // Conditional move
7918 instruct cmovI_mem(cmpOp cop, eFlagsReg cr, eRegI dst, memory src) %{
7919 predicate(VM_Version::supports_cmov() );
7920 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7921 ins_cost(250);
7922 format %{ "CMOV$cop $dst,$src" %}
7923 opcode(0x0F,0x40);
7924 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7925 ins_pipe( pipe_cmov_mem );
7926 %}
7928 // Conditional move
7929 instruct cmovI_memU(cmpOpU cop, eFlagsRegU cr, eRegI dst, memory src) %{
7930 predicate(VM_Version::supports_cmov() );
7931 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7932 ins_cost(250);
7933 format %{ "CMOV$cop $dst,$src" %}
7934 opcode(0x0F,0x40);
7935 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7936 ins_pipe( pipe_cmov_mem );
7937 %}
7939 instruct cmovI_memUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, memory src) %{
7940 predicate(VM_Version::supports_cmov() );
7941 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7942 ins_cost(250);
7943 expand %{
7944 cmovI_memU(cop, cr, dst, src);
7945 %}
7946 %}
7948 // Conditional move
7949 instruct cmovP_reg(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7950 predicate(VM_Version::supports_cmov() );
7951 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7952 ins_cost(200);
7953 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7954 opcode(0x0F,0x40);
7955 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7956 ins_pipe( pipe_cmov_reg );
7957 %}
7959 // Conditional move (non-P6 version)
7960 // Note: a CMoveP is generated for stubs and native wrappers
7961 // regardless of whether we are on a P6, so we
7962 // emulate a cmov here
7963 instruct cmovP_reg_nonP6(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7964 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7965 ins_cost(300);
7966 format %{ "Jn$cop skip\n\t"
7967 "MOV $dst,$src\t# pointer\n"
7968 "skip:" %}
7969 opcode(0x8b);
7970 ins_encode( enc_cmov_branch(cop, 0x2), OpcP, RegReg(dst, src));
7971 ins_pipe( pipe_cmov_reg );
7972 %}
7974 // Conditional move
7975 instruct cmovP_regU(cmpOpU cop, eFlagsRegU cr, eRegP dst, eRegP src ) %{
7976 predicate(VM_Version::supports_cmov() );
7977 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7978 ins_cost(200);
7979 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7980 opcode(0x0F,0x40);
7981 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7982 ins_pipe( pipe_cmov_reg );
7983 %}
7985 instruct cmovP_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegP dst, eRegP src ) %{
7986 predicate(VM_Version::supports_cmov() );
7987 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7988 ins_cost(200);
7989 expand %{
7990 cmovP_regU(cop, cr, dst, src);
7991 %}
7992 %}
7994 // DISABLED: Requires the ADLC to emit a bottom_type call that
7995 // correctly meets the two pointer arguments; one is an incoming
7996 // register but the other is a memory operand. ALSO appears to
7997 // be buggy with implicit null checks.
7998 //
7999 //// Conditional move
8000 //instruct cmovP_mem(cmpOp cop, eFlagsReg cr, eRegP dst, memory src) %{
8001 // predicate(VM_Version::supports_cmov() );
8002 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
8003 // ins_cost(250);
8004 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
8005 // opcode(0x0F,0x40);
8006 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
8007 // ins_pipe( pipe_cmov_mem );
8008 //%}
8009 //
8010 //// Conditional move
8011 //instruct cmovP_memU(cmpOpU cop, eFlagsRegU cr, eRegP dst, memory src) %{
8012 // predicate(VM_Version::supports_cmov() );
8013 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
8014 // ins_cost(250);
8015 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
8016 // opcode(0x0F,0x40);
8017 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
8018 // ins_pipe( pipe_cmov_mem );
8019 //%}
8021 // Conditional move
8022 instruct fcmovD_regU(cmpOp_fcmov cop, eFlagsRegU cr, regDPR1 dst, regD src) %{
8023 predicate(UseSSE<=1);
8024 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8025 ins_cost(200);
8026 format %{ "FCMOV$cop $dst,$src\t# double" %}
8027 opcode(0xDA);
8028 ins_encode( enc_cmov_d(cop,src) );
8029 ins_pipe( pipe_cmovD_reg );
8030 %}
8032 // Conditional move
8033 instruct fcmovF_regU(cmpOp_fcmov cop, eFlagsRegU cr, regFPR1 dst, regF src) %{
8034 predicate(UseSSE==0);
8035 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8036 ins_cost(200);
8037 format %{ "FCMOV$cop $dst,$src\t# float" %}
8038 opcode(0xDA);
8039 ins_encode( enc_cmov_d(cop,src) );
8040 ins_pipe( pipe_cmovD_reg );
8041 %}
8043 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
8044 instruct fcmovD_regS(cmpOp cop, eFlagsReg cr, regD dst, regD src) %{
8045 predicate(UseSSE<=1);
8046 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8047 ins_cost(200);
8048 format %{ "Jn$cop skip\n\t"
8049 "MOV $dst,$src\t# double\n"
8050 "skip:" %}
8051 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8052 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_D(src), OpcP, RegOpc(dst) );
8053 ins_pipe( pipe_cmovD_reg );
8054 %}
8056 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
8057 instruct fcmovF_regS(cmpOp cop, eFlagsReg cr, regF dst, regF src) %{
8058 predicate(UseSSE==0);
8059 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8060 ins_cost(200);
8061 format %{ "Jn$cop skip\n\t"
8062 "MOV $dst,$src\t# float\n"
8063 "skip:" %}
8064 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8065 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_F(src), OpcP, RegOpc(dst) );
8066 ins_pipe( pipe_cmovD_reg );
8067 %}
8069 // No CMOVE with SSE/SSE2
8070 instruct fcmovX_regS(cmpOp cop, eFlagsReg cr, regX dst, regX src) %{
8071 predicate (UseSSE>=1);
8072 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8073 ins_cost(200);
8074 format %{ "Jn$cop skip\n\t"
8075 "MOVSS $dst,$src\t# float\n"
8076 "skip:" %}
8077 ins_encode %{
8078 Label skip;
8079 // Invert sense of branch from sense of CMOV
8080 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8081 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8082 __ bind(skip);
8083 %}
8084 ins_pipe( pipe_slow );
8085 %}
8087 // No CMOVE with SSE/SSE2
8088 instruct fcmovXD_regS(cmpOp cop, eFlagsReg cr, regXD dst, regXD src) %{
8089 predicate (UseSSE>=2);
8090 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8091 ins_cost(200);
8092 format %{ "Jn$cop skip\n\t"
8093 "MOVSD $dst,$src\t# float\n"
8094 "skip:" %}
8095 ins_encode %{
8096 Label skip;
8097 // Invert sense of branch from sense of CMOV
8098 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8099 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8100 __ bind(skip);
8101 %}
8102 ins_pipe( pipe_slow );
8103 %}
8105 // unsigned version
8106 instruct fcmovX_regU(cmpOpU cop, eFlagsRegU cr, regX dst, regX src) %{
8107 predicate (UseSSE>=1);
8108 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8109 ins_cost(200);
8110 format %{ "Jn$cop skip\n\t"
8111 "MOVSS $dst,$src\t# float\n"
8112 "skip:" %}
8113 ins_encode %{
8114 Label skip;
8115 // Invert sense of branch from sense of CMOV
8116 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8117 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8118 __ bind(skip);
8119 %}
8120 ins_pipe( pipe_slow );
8121 %}
8123 instruct fcmovX_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regX dst, regX src) %{
8124 predicate (UseSSE>=1);
8125 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8126 ins_cost(200);
8127 expand %{
8128 fcmovX_regU(cop, cr, dst, src);
8129 %}
8130 %}
8132 // unsigned version
8133 instruct fcmovXD_regU(cmpOpU cop, eFlagsRegU cr, regXD dst, regXD src) %{
8134 predicate (UseSSE>=2);
8135 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8136 ins_cost(200);
8137 format %{ "Jn$cop skip\n\t"
8138 "MOVSD $dst,$src\t# float\n"
8139 "skip:" %}
8140 ins_encode %{
8141 Label skip;
8142 // Invert sense of branch from sense of CMOV
8143 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8144 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8145 __ bind(skip);
8146 %}
8147 ins_pipe( pipe_slow );
8148 %}
8150 instruct fcmovXD_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regXD dst, regXD src) %{
8151 predicate (UseSSE>=2);
8152 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8153 ins_cost(200);
8154 expand %{
8155 fcmovXD_regU(cop, cr, dst, src);
8156 %}
8157 %}
8159 instruct cmovL_reg(cmpOp cop, eFlagsReg cr, eRegL dst, eRegL src) %{
8160 predicate(VM_Version::supports_cmov() );
8161 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8162 ins_cost(200);
8163 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8164 "CMOV$cop $dst.hi,$src.hi" %}
8165 opcode(0x0F,0x40);
8166 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8167 ins_pipe( pipe_cmov_reg_long );
8168 %}
8170 instruct cmovL_regU(cmpOpU cop, eFlagsRegU cr, eRegL dst, eRegL src) %{
8171 predicate(VM_Version::supports_cmov() );
8172 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8173 ins_cost(200);
8174 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8175 "CMOV$cop $dst.hi,$src.hi" %}
8176 opcode(0x0F,0x40);
8177 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8178 ins_pipe( pipe_cmov_reg_long );
8179 %}
8181 instruct cmovL_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegL dst, eRegL src) %{
8182 predicate(VM_Version::supports_cmov() );
8183 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8184 ins_cost(200);
8185 expand %{
8186 cmovL_regU(cop, cr, dst, src);
8187 %}
8188 %}
8190 //----------Arithmetic Instructions--------------------------------------------
8191 //----------Addition Instructions----------------------------------------------
8192 // Integer Addition Instructions
8193 instruct addI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8194 match(Set dst (AddI dst src));
8195 effect(KILL cr);
8197 size(2);
8198 format %{ "ADD $dst,$src" %}
8199 opcode(0x03);
8200 ins_encode( OpcP, RegReg( dst, src) );
8201 ins_pipe( ialu_reg_reg );
8202 %}
8204 instruct addI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8205 match(Set dst (AddI dst src));
8206 effect(KILL cr);
8208 format %{ "ADD $dst,$src" %}
8209 opcode(0x81, 0x00); /* /0 id */
8210 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8211 ins_pipe( ialu_reg );
8212 %}
8214 instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
8215 predicate(UseIncDec);
8216 match(Set dst (AddI dst src));
8217 effect(KILL cr);
8219 size(1);
8220 format %{ "INC $dst" %}
8221 opcode(0x40); /* */
8222 ins_encode( Opc_plus( primary, dst ) );
8223 ins_pipe( ialu_reg );
8224 %}
8226 instruct leaI_eReg_immI(eRegI dst, eRegI src0, immI src1) %{
8227 match(Set dst (AddI src0 src1));
8228 ins_cost(110);
8230 format %{ "LEA $dst,[$src0 + $src1]" %}
8231 opcode(0x8D); /* 0x8D /r */
8232 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8233 ins_pipe( ialu_reg_reg );
8234 %}
8236 instruct leaP_eReg_immI(eRegP dst, eRegP src0, immI src1) %{
8237 match(Set dst (AddP src0 src1));
8238 ins_cost(110);
8240 format %{ "LEA $dst,[$src0 + $src1]\t# ptr" %}
8241 opcode(0x8D); /* 0x8D /r */
8242 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8243 ins_pipe( ialu_reg_reg );
8244 %}
8246 instruct decI_eReg(eRegI dst, immI_M1 src, eFlagsReg cr) %{
8247 predicate(UseIncDec);
8248 match(Set dst (AddI dst src));
8249 effect(KILL cr);
8251 size(1);
8252 format %{ "DEC $dst" %}
8253 opcode(0x48); /* */
8254 ins_encode( Opc_plus( primary, dst ) );
8255 ins_pipe( ialu_reg );
8256 %}
8258 instruct addP_eReg(eRegP dst, eRegI src, eFlagsReg cr) %{
8259 match(Set dst (AddP dst src));
8260 effect(KILL cr);
8262 size(2);
8263 format %{ "ADD $dst,$src" %}
8264 opcode(0x03);
8265 ins_encode( OpcP, RegReg( dst, src) );
8266 ins_pipe( ialu_reg_reg );
8267 %}
8269 instruct addP_eReg_imm(eRegP dst, immI src, eFlagsReg cr) %{
8270 match(Set dst (AddP dst src));
8271 effect(KILL cr);
8273 format %{ "ADD $dst,$src" %}
8274 opcode(0x81,0x00); /* Opcode 81 /0 id */
8275 // ins_encode( RegImm( dst, src) );
8276 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8277 ins_pipe( ialu_reg );
8278 %}
8280 instruct addI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8281 match(Set dst (AddI dst (LoadI src)));
8282 effect(KILL cr);
8284 ins_cost(125);
8285 format %{ "ADD $dst,$src" %}
8286 opcode(0x03);
8287 ins_encode( OpcP, RegMem( dst, src) );
8288 ins_pipe( ialu_reg_mem );
8289 %}
8291 instruct addI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8292 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8293 effect(KILL cr);
8295 ins_cost(150);
8296 format %{ "ADD $dst,$src" %}
8297 opcode(0x01); /* Opcode 01 /r */
8298 ins_encode( OpcP, RegMem( src, dst ) );
8299 ins_pipe( ialu_mem_reg );
8300 %}
8302 // Add Memory with Immediate
8303 instruct addI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8304 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8305 effect(KILL cr);
8307 ins_cost(125);
8308 format %{ "ADD $dst,$src" %}
8309 opcode(0x81); /* Opcode 81 /0 id */
8310 ins_encode( OpcSE( src ), RMopc_Mem(0x00,dst), Con8or32( src ) );
8311 ins_pipe( ialu_mem_imm );
8312 %}
8314 instruct incI_mem(memory dst, immI1 src, eFlagsReg cr) %{
8315 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8316 effect(KILL cr);
8318 ins_cost(125);
8319 format %{ "INC $dst" %}
8320 opcode(0xFF); /* Opcode FF /0 */
8321 ins_encode( OpcP, RMopc_Mem(0x00,dst));
8322 ins_pipe( ialu_mem_imm );
8323 %}
8325 instruct decI_mem(memory dst, immI_M1 src, eFlagsReg cr) %{
8326 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8327 effect(KILL cr);
8329 ins_cost(125);
8330 format %{ "DEC $dst" %}
8331 opcode(0xFF); /* Opcode FF /1 */
8332 ins_encode( OpcP, RMopc_Mem(0x01,dst));
8333 ins_pipe( ialu_mem_imm );
8334 %}
8337 instruct checkCastPP( eRegP dst ) %{
8338 match(Set dst (CheckCastPP dst));
8340 size(0);
8341 format %{ "#checkcastPP of $dst" %}
8342 ins_encode( /*empty encoding*/ );
8343 ins_pipe( empty );
8344 %}
8346 instruct castPP( eRegP dst ) %{
8347 match(Set dst (CastPP dst));
8348 format %{ "#castPP of $dst" %}
8349 ins_encode( /*empty encoding*/ );
8350 ins_pipe( empty );
8351 %}
8353 instruct castII( eRegI dst ) %{
8354 match(Set dst (CastII dst));
8355 format %{ "#castII of $dst" %}
8356 ins_encode( /*empty encoding*/ );
8357 ins_cost(0);
8358 ins_pipe( empty );
8359 %}
8362 // Load-locked - same as a regular pointer load when used with compare-swap
8363 instruct loadPLocked(eRegP dst, memory mem) %{
8364 match(Set dst (LoadPLocked mem));
8366 ins_cost(125);
8367 format %{ "MOV $dst,$mem\t# Load ptr. locked" %}
8368 opcode(0x8B);
8369 ins_encode( OpcP, RegMem(dst,mem));
8370 ins_pipe( ialu_reg_mem );
8371 %}
8373 // LoadLong-locked - same as a volatile long load when used with compare-swap
8374 instruct loadLLocked(stackSlotL dst, load_long_memory mem) %{
8375 predicate(UseSSE<=1);
8376 match(Set dst (LoadLLocked mem));
8378 ins_cost(200);
8379 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
8380 "FISTp $dst" %}
8381 ins_encode(enc_loadL_volatile(mem,dst));
8382 ins_pipe( fpu_reg_mem );
8383 %}
8385 instruct loadLX_Locked(stackSlotL dst, load_long_memory mem, regXD tmp) %{
8386 predicate(UseSSE>=2);
8387 match(Set dst (LoadLLocked mem));
8388 effect(TEMP tmp);
8389 ins_cost(180);
8390 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8391 "MOVSD $dst,$tmp" %}
8392 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
8393 ins_pipe( pipe_slow );
8394 %}
8396 instruct loadLX_reg_Locked(eRegL dst, load_long_memory mem, regXD tmp) %{
8397 predicate(UseSSE>=2);
8398 match(Set dst (LoadLLocked mem));
8399 effect(TEMP tmp);
8400 ins_cost(160);
8401 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8402 "MOVD $dst.lo,$tmp\n\t"
8403 "PSRLQ $tmp,32\n\t"
8404 "MOVD $dst.hi,$tmp" %}
8405 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
8406 ins_pipe( pipe_slow );
8407 %}
8409 // Conditional-store of the updated heap-top.
8410 // Used during allocation of the shared heap.
8411 // Sets flags (EQ) on success. Implemented with a CMPXCHG on Intel.
8412 instruct storePConditional( memory heap_top_ptr, eAXRegP oldval, eRegP newval, eFlagsReg cr ) %{
8413 match(Set cr (StorePConditional heap_top_ptr (Binary oldval newval)));
8414 // EAX is killed if there is contention, but then it's also unused.
8415 // In the common case of no contention, EAX holds the new oop address.
8416 format %{ "CMPXCHG $heap_top_ptr,$newval\t# If EAX==$heap_top_ptr Then store $newval into $heap_top_ptr" %}
8417 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval,heap_top_ptr) );
8418 ins_pipe( pipe_cmpxchg );
8419 %}
8421 // Conditional-store of an int value.
8422 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG on Intel.
8423 instruct storeIConditional( memory mem, eAXRegI oldval, eRegI newval, eFlagsReg cr ) %{
8424 match(Set cr (StoreIConditional mem (Binary oldval newval)));
8425 effect(KILL oldval);
8426 format %{ "CMPXCHG $mem,$newval\t# If EAX==$mem Then store $newval into $mem" %}
8427 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval, mem) );
8428 ins_pipe( pipe_cmpxchg );
8429 %}
8431 // Conditional-store of a long value.
8432 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG8 on Intel.
8433 instruct storeLConditional( memory mem, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8434 match(Set cr (StoreLConditional mem (Binary oldval newval)));
8435 effect(KILL oldval);
8436 format %{ "XCHG EBX,ECX\t# correct order for CMPXCHG8 instruction\n\t"
8437 "CMPXCHG8 $mem,ECX:EBX\t# If EDX:EAX==$mem Then store ECX:EBX into $mem\n\t"
8438 "XCHG EBX,ECX"
8439 %}
8440 ins_encode %{
8441 // Note: we need to swap rbx, and rcx before and after the
8442 // cmpxchg8 instruction because the instruction uses
8443 // rcx as the high order word of the new value to store but
8444 // our register encoding uses rbx.
8445 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8446 if( os::is_MP() )
8447 __ lock();
8448 __ cmpxchg8($mem$$Address);
8449 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8450 %}
8451 ins_pipe( pipe_cmpxchg );
8452 %}
8454 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them
8456 instruct compareAndSwapL( eRegI res, eSIRegP mem_ptr, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8457 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval)));
8458 effect(KILL cr, KILL oldval);
8459 format %{ "CMPXCHG8 [$mem_ptr],$newval\t# If EDX:EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8460 "MOV $res,0\n\t"
8461 "JNE,s fail\n\t"
8462 "MOV $res,1\n"
8463 "fail:" %}
8464 ins_encode( enc_cmpxchg8(mem_ptr),
8465 enc_flags_ne_to_boolean(res) );
8466 ins_pipe( pipe_cmpxchg );
8467 %}
8469 instruct compareAndSwapP( eRegI res, pRegP mem_ptr, eAXRegP oldval, eCXRegP newval, eFlagsReg cr) %{
8470 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval)));
8471 effect(KILL cr, KILL oldval);
8472 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8473 "MOV $res,0\n\t"
8474 "JNE,s fail\n\t"
8475 "MOV $res,1\n"
8476 "fail:" %}
8477 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8478 ins_pipe( pipe_cmpxchg );
8479 %}
8481 instruct compareAndSwapI( eRegI res, pRegP mem_ptr, eAXRegI oldval, eCXRegI newval, eFlagsReg cr) %{
8482 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval)));
8483 effect(KILL cr, KILL oldval);
8484 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8485 "MOV $res,0\n\t"
8486 "JNE,s fail\n\t"
8487 "MOV $res,1\n"
8488 "fail:" %}
8489 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8490 ins_pipe( pipe_cmpxchg );
8491 %}
8493 //----------Subtraction Instructions-------------------------------------------
8494 // Integer Subtraction Instructions
8495 instruct subI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8496 match(Set dst (SubI dst src));
8497 effect(KILL cr);
8499 size(2);
8500 format %{ "SUB $dst,$src" %}
8501 opcode(0x2B);
8502 ins_encode( OpcP, RegReg( dst, src) );
8503 ins_pipe( ialu_reg_reg );
8504 %}
8506 instruct subI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8507 match(Set dst (SubI dst src));
8508 effect(KILL cr);
8510 format %{ "SUB $dst,$src" %}
8511 opcode(0x81,0x05); /* Opcode 81 /5 */
8512 // ins_encode( RegImm( dst, src) );
8513 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8514 ins_pipe( ialu_reg );
8515 %}
8517 instruct subI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8518 match(Set dst (SubI dst (LoadI src)));
8519 effect(KILL cr);
8521 ins_cost(125);
8522 format %{ "SUB $dst,$src" %}
8523 opcode(0x2B);
8524 ins_encode( OpcP, RegMem( dst, src) );
8525 ins_pipe( ialu_reg_mem );
8526 %}
8528 instruct subI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8529 match(Set dst (StoreI dst (SubI (LoadI dst) src)));
8530 effect(KILL cr);
8532 ins_cost(150);
8533 format %{ "SUB $dst,$src" %}
8534 opcode(0x29); /* Opcode 29 /r */
8535 ins_encode( OpcP, RegMem( src, dst ) );
8536 ins_pipe( ialu_mem_reg );
8537 %}
8539 // Subtract from a pointer
8540 instruct subP_eReg(eRegP dst, eRegI src, immI0 zero, eFlagsReg cr) %{
8541 match(Set dst (AddP dst (SubI zero src)));
8542 effect(KILL cr);
8544 size(2);
8545 format %{ "SUB $dst,$src" %}
8546 opcode(0x2B);
8547 ins_encode( OpcP, RegReg( dst, src) );
8548 ins_pipe( ialu_reg_reg );
8549 %}
8551 instruct negI_eReg(eRegI dst, immI0 zero, eFlagsReg cr) %{
8552 match(Set dst (SubI zero dst));
8553 effect(KILL cr);
8555 size(2);
8556 format %{ "NEG $dst" %}
8557 opcode(0xF7,0x03); // Opcode F7 /3
8558 ins_encode( OpcP, RegOpc( dst ) );
8559 ins_pipe( ialu_reg );
8560 %}
8563 //----------Multiplication/Division Instructions-------------------------------
8564 // Integer Multiplication Instructions
8565 // Multiply Register
8566 instruct mulI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8567 match(Set dst (MulI dst src));
8568 effect(KILL cr);
8570 size(3);
8571 ins_cost(300);
8572 format %{ "IMUL $dst,$src" %}
8573 opcode(0xAF, 0x0F);
8574 ins_encode( OpcS, OpcP, RegReg( dst, src) );
8575 ins_pipe( ialu_reg_reg_alu0 );
8576 %}
8578 // Multiply 32-bit Immediate
8579 instruct mulI_eReg_imm(eRegI dst, eRegI src, immI imm, eFlagsReg cr) %{
8580 match(Set dst (MulI src imm));
8581 effect(KILL cr);
8583 ins_cost(300);
8584 format %{ "IMUL $dst,$src,$imm" %}
8585 opcode(0x69); /* 69 /r id */
8586 ins_encode( OpcSE(imm), RegReg( dst, src ), Con8or32( imm ) );
8587 ins_pipe( ialu_reg_reg_alu0 );
8588 %}
8590 instruct loadConL_low_only(eADXRegL_low_only dst, immL32 src, eFlagsReg cr) %{
8591 match(Set dst src);
8592 effect(KILL cr);
8594 // Note that this is artificially increased to make it more expensive than loadConL
8595 ins_cost(250);
8596 format %{ "MOV EAX,$src\t// low word only" %}
8597 opcode(0xB8);
8598 ins_encode( LdImmL_Lo(dst, src) );
8599 ins_pipe( ialu_reg_fat );
8600 %}
8602 // Multiply by 32-bit Immediate, taking the shifted high order results
8603 // (special case for shift by 32)
8604 instruct mulI_imm_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32 cnt, eFlagsReg cr) %{
8605 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8606 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8607 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8608 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8609 effect(USE src1, KILL cr);
8611 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8612 ins_cost(0*100 + 1*400 - 150);
8613 format %{ "IMUL EDX:EAX,$src1" %}
8614 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8615 ins_pipe( pipe_slow );
8616 %}
8618 // Multiply by 32-bit Immediate, taking the shifted high order results
8619 instruct mulI_imm_RShift_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr) %{
8620 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8621 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8622 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8623 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8624 effect(USE src1, KILL cr);
8626 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8627 ins_cost(1*100 + 1*400 - 150);
8628 format %{ "IMUL EDX:EAX,$src1\n\t"
8629 "SAR EDX,$cnt-32" %}
8630 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8631 ins_pipe( pipe_slow );
8632 %}
8634 // Multiply Memory 32-bit Immediate
8635 instruct mulI_mem_imm(eRegI dst, memory src, immI imm, eFlagsReg cr) %{
8636 match(Set dst (MulI (LoadI src) imm));
8637 effect(KILL cr);
8639 ins_cost(300);
8640 format %{ "IMUL $dst,$src,$imm" %}
8641 opcode(0x69); /* 69 /r id */
8642 ins_encode( OpcSE(imm), RegMem( dst, src ), Con8or32( imm ) );
8643 ins_pipe( ialu_reg_mem_alu0 );
8644 %}
8646 // Multiply Memory
8647 instruct mulI(eRegI dst, memory src, eFlagsReg cr) %{
8648 match(Set dst (MulI dst (LoadI src)));
8649 effect(KILL cr);
8651 ins_cost(350);
8652 format %{ "IMUL $dst,$src" %}
8653 opcode(0xAF, 0x0F);
8654 ins_encode( OpcS, OpcP, RegMem( dst, src) );
8655 ins_pipe( ialu_reg_mem_alu0 );
8656 %}
8658 // Multiply Register Int to Long
8659 instruct mulI2L(eADXRegL dst, eAXRegI src, nadxRegI src1, eFlagsReg flags) %{
8660 // Basic Idea: long = (long)int * (long)int
8661 match(Set dst (MulL (ConvI2L src) (ConvI2L src1)));
8662 effect(DEF dst, USE src, USE src1, KILL flags);
8664 ins_cost(300);
8665 format %{ "IMUL $dst,$src1" %}
8667 ins_encode( long_int_multiply( dst, src1 ) );
8668 ins_pipe( ialu_reg_reg_alu0 );
8669 %}
8671 instruct mulIS_eReg(eADXRegL dst, immL_32bits mask, eFlagsReg flags, eAXRegI src, nadxRegI src1) %{
8672 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
8673 match(Set dst (MulL (AndL (ConvI2L src) mask) (AndL (ConvI2L src1) mask)));
8674 effect(KILL flags);
8676 ins_cost(300);
8677 format %{ "MUL $dst,$src1" %}
8679 ins_encode( long_uint_multiply(dst, src1) );
8680 ins_pipe( ialu_reg_reg_alu0 );
8681 %}
8683 // Multiply Register Long
8684 instruct mulL_eReg(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8685 match(Set dst (MulL dst src));
8686 effect(KILL cr, TEMP tmp);
8687 ins_cost(4*100+3*400);
8688 // Basic idea: lo(result) = lo(x_lo * y_lo)
8689 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
8690 format %{ "MOV $tmp,$src.lo\n\t"
8691 "IMUL $tmp,EDX\n\t"
8692 "MOV EDX,$src.hi\n\t"
8693 "IMUL EDX,EAX\n\t"
8694 "ADD $tmp,EDX\n\t"
8695 "MUL EDX:EAX,$src.lo\n\t"
8696 "ADD EDX,$tmp" %}
8697 ins_encode( long_multiply( dst, src, tmp ) );
8698 ins_pipe( pipe_slow );
8699 %}
8701 // Multiply Register Long where the left operand's high 32 bits are zero
8702 instruct mulL_eReg_lhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8703 predicate(is_operand_hi32_zero(n->in(1)));
8704 match(Set dst (MulL dst src));
8705 effect(KILL cr, TEMP tmp);
8706 ins_cost(2*100+2*400);
8707 // Basic idea: lo(result) = lo(x_lo * y_lo)
8708 // hi(result) = hi(x_lo * y_lo) + lo(x_lo * y_hi) where lo(x_hi * y_lo) = 0 because x_hi = 0
8709 format %{ "MOV $tmp,$src.hi\n\t"
8710 "IMUL $tmp,EAX\n\t"
8711 "MUL EDX:EAX,$src.lo\n\t"
8712 "ADD EDX,$tmp" %}
8713 ins_encode %{
8714 __ movl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
8715 __ imull($tmp$$Register, rax);
8716 __ mull($src$$Register);
8717 __ addl(rdx, $tmp$$Register);
8718 %}
8719 ins_pipe( pipe_slow );
8720 %}
8722 // Multiply Register Long where the right operand's high 32 bits are zero
8723 instruct mulL_eReg_rhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8724 predicate(is_operand_hi32_zero(n->in(2)));
8725 match(Set dst (MulL dst src));
8726 effect(KILL cr, TEMP tmp);
8727 ins_cost(2*100+2*400);
8728 // Basic idea: lo(result) = lo(x_lo * y_lo)
8729 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) where lo(x_lo * y_hi) = 0 because y_hi = 0
8730 format %{ "MOV $tmp,$src.lo\n\t"
8731 "IMUL $tmp,EDX\n\t"
8732 "MUL EDX:EAX,$src.lo\n\t"
8733 "ADD EDX,$tmp" %}
8734 ins_encode %{
8735 __ movl($tmp$$Register, $src$$Register);
8736 __ imull($tmp$$Register, rdx);
8737 __ mull($src$$Register);
8738 __ addl(rdx, $tmp$$Register);
8739 %}
8740 ins_pipe( pipe_slow );
8741 %}
8743 // Multiply Register Long where the left and the right operands' high 32 bits are zero
8744 instruct mulL_eReg_hi0(eADXRegL dst, eRegL src, eFlagsReg cr) %{
8745 predicate(is_operand_hi32_zero(n->in(1)) && is_operand_hi32_zero(n->in(2)));
8746 match(Set dst (MulL dst src));
8747 effect(KILL cr);
8748 ins_cost(1*400);
8749 // Basic idea: lo(result) = lo(x_lo * y_lo)
8750 // hi(result) = hi(x_lo * y_lo) where lo(x_hi * y_lo) = 0 and lo(x_lo * y_hi) = 0 because x_hi = 0 and y_hi = 0
8751 format %{ "MUL EDX:EAX,$src.lo\n\t" %}
8752 ins_encode %{
8753 __ mull($src$$Register);
8754 %}
8755 ins_pipe( pipe_slow );
8756 %}
8758 // Multiply Register Long by small constant
8759 instruct mulL_eReg_con(eADXRegL dst, immL_127 src, eRegI tmp, eFlagsReg cr) %{
8760 match(Set dst (MulL dst src));
8761 effect(KILL cr, TEMP tmp);
8762 ins_cost(2*100+2*400);
8763 size(12);
8764 // Basic idea: lo(result) = lo(src * EAX)
8765 // hi(result) = hi(src * EAX) + lo(src * EDX)
8766 format %{ "IMUL $tmp,EDX,$src\n\t"
8767 "MOV EDX,$src\n\t"
8768 "MUL EDX\t# EDX*EAX -> EDX:EAX\n\t"
8769 "ADD EDX,$tmp" %}
8770 ins_encode( long_multiply_con( dst, src, tmp ) );
8771 ins_pipe( pipe_slow );
8772 %}
8774 // Integer DIV with Register
8775 instruct divI_eReg(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8776 match(Set rax (DivI rax div));
8777 effect(KILL rdx, KILL cr);
8778 size(26);
8779 ins_cost(30*100+10*100);
8780 format %{ "CMP EAX,0x80000000\n\t"
8781 "JNE,s normal\n\t"
8782 "XOR EDX,EDX\n\t"
8783 "CMP ECX,-1\n\t"
8784 "JE,s done\n"
8785 "normal: CDQ\n\t"
8786 "IDIV $div\n\t"
8787 "done:" %}
8788 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8789 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8790 ins_pipe( ialu_reg_reg_alu0 );
8791 %}
8793 // Divide Register Long
8794 instruct divL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8795 match(Set dst (DivL src1 src2));
8796 effect( KILL cr, KILL cx, KILL bx );
8797 ins_cost(10000);
8798 format %{ "PUSH $src1.hi\n\t"
8799 "PUSH $src1.lo\n\t"
8800 "PUSH $src2.hi\n\t"
8801 "PUSH $src2.lo\n\t"
8802 "CALL SharedRuntime::ldiv\n\t"
8803 "ADD ESP,16" %}
8804 ins_encode( long_div(src1,src2) );
8805 ins_pipe( pipe_slow );
8806 %}
8808 // Integer DIVMOD with Register, both quotient and mod results
8809 instruct divModI_eReg_divmod(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8810 match(DivModI rax div);
8811 effect(KILL cr);
8812 size(26);
8813 ins_cost(30*100+10*100);
8814 format %{ "CMP EAX,0x80000000\n\t"
8815 "JNE,s normal\n\t"
8816 "XOR EDX,EDX\n\t"
8817 "CMP ECX,-1\n\t"
8818 "JE,s done\n"
8819 "normal: CDQ\n\t"
8820 "IDIV $div\n\t"
8821 "done:" %}
8822 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8823 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8824 ins_pipe( pipe_slow );
8825 %}
8827 // Integer MOD with Register
8828 instruct modI_eReg(eDXRegI rdx, eAXRegI rax, eCXRegI div, eFlagsReg cr) %{
8829 match(Set rdx (ModI rax div));
8830 effect(KILL rax, KILL cr);
8832 size(26);
8833 ins_cost(300);
8834 format %{ "CDQ\n\t"
8835 "IDIV $div" %}
8836 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8837 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8838 ins_pipe( ialu_reg_reg_alu0 );
8839 %}
8841 // Remainder Register Long
8842 instruct modL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8843 match(Set dst (ModL src1 src2));
8844 effect( KILL cr, KILL cx, KILL bx );
8845 ins_cost(10000);
8846 format %{ "PUSH $src1.hi\n\t"
8847 "PUSH $src1.lo\n\t"
8848 "PUSH $src2.hi\n\t"
8849 "PUSH $src2.lo\n\t"
8850 "CALL SharedRuntime::lrem\n\t"
8851 "ADD ESP,16" %}
8852 ins_encode( long_mod(src1,src2) );
8853 ins_pipe( pipe_slow );
8854 %}
8856 // Divide Register Long (no special case since divisor != -1)
8857 instruct divL_eReg_imm32( eADXRegL dst, immL32 imm, eRegI tmp, eRegI tmp2, eFlagsReg cr ) %{
8858 match(Set dst (DivL dst imm));
8859 effect( TEMP tmp, TEMP tmp2, KILL cr );
8860 ins_cost(1000);
8861 format %{ "MOV $tmp,abs($imm) # ldiv EDX:EAX,$imm\n\t"
8862 "XOR $tmp2,$tmp2\n\t"
8863 "CMP $tmp,EDX\n\t"
8864 "JA,s fast\n\t"
8865 "MOV $tmp2,EAX\n\t"
8866 "MOV EAX,EDX\n\t"
8867 "MOV EDX,0\n\t"
8868 "JLE,s pos\n\t"
8869 "LNEG EAX : $tmp2\n\t"
8870 "DIV $tmp # unsigned division\n\t"
8871 "XCHG EAX,$tmp2\n\t"
8872 "DIV $tmp\n\t"
8873 "LNEG $tmp2 : EAX\n\t"
8874 "JMP,s done\n"
8875 "pos:\n\t"
8876 "DIV $tmp\n\t"
8877 "XCHG EAX,$tmp2\n"
8878 "fast:\n\t"
8879 "DIV $tmp\n"
8880 "done:\n\t"
8881 "MOV EDX,$tmp2\n\t"
8882 "NEG EDX:EAX # if $imm < 0" %}
8883 ins_encode %{
8884 int con = (int)$imm$$constant;
8885 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8886 int pcon = (con > 0) ? con : -con;
8887 Label Lfast, Lpos, Ldone;
8889 __ movl($tmp$$Register, pcon);
8890 __ xorl($tmp2$$Register,$tmp2$$Register);
8891 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8892 __ jccb(Assembler::above, Lfast); // result fits into 32 bit
8894 __ movl($tmp2$$Register, $dst$$Register); // save
8895 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8896 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8897 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8899 // Negative dividend.
8900 // convert value to positive to use unsigned division
8901 __ lneg($dst$$Register, $tmp2$$Register);
8902 __ divl($tmp$$Register);
8903 __ xchgl($dst$$Register, $tmp2$$Register);
8904 __ divl($tmp$$Register);
8905 // revert result back to negative
8906 __ lneg($tmp2$$Register, $dst$$Register);
8907 __ jmpb(Ldone);
8909 __ bind(Lpos);
8910 __ divl($tmp$$Register); // Use unsigned division
8911 __ xchgl($dst$$Register, $tmp2$$Register);
8912 // Fallthrow for final divide, tmp2 has 32 bit hi result
8914 __ bind(Lfast);
8915 // fast path: src is positive
8916 __ divl($tmp$$Register); // Use unsigned division
8918 __ bind(Ldone);
8919 __ movl(HIGH_FROM_LOW($dst$$Register),$tmp2$$Register);
8920 if (con < 0) {
8921 __ lneg(HIGH_FROM_LOW($dst$$Register), $dst$$Register);
8922 }
8923 %}
8924 ins_pipe( pipe_slow );
8925 %}
8927 // Remainder Register Long (remainder fit into 32 bits)
8928 instruct modL_eReg_imm32( eADXRegL dst, immL32 imm, eRegI tmp, eRegI tmp2, eFlagsReg cr ) %{
8929 match(Set dst (ModL dst imm));
8930 effect( TEMP tmp, TEMP tmp2, KILL cr );
8931 ins_cost(1000);
8932 format %{ "MOV $tmp,abs($imm) # lrem EDX:EAX,$imm\n\t"
8933 "CMP $tmp,EDX\n\t"
8934 "JA,s fast\n\t"
8935 "MOV $tmp2,EAX\n\t"
8936 "MOV EAX,EDX\n\t"
8937 "MOV EDX,0\n\t"
8938 "JLE,s pos\n\t"
8939 "LNEG EAX : $tmp2\n\t"
8940 "DIV $tmp # unsigned division\n\t"
8941 "MOV EAX,$tmp2\n\t"
8942 "DIV $tmp\n\t"
8943 "NEG EDX\n\t"
8944 "JMP,s done\n"
8945 "pos:\n\t"
8946 "DIV $tmp\n\t"
8947 "MOV EAX,$tmp2\n"
8948 "fast:\n\t"
8949 "DIV $tmp\n"
8950 "done:\n\t"
8951 "MOV EAX,EDX\n\t"
8952 "SAR EDX,31\n\t" %}
8953 ins_encode %{
8954 int con = (int)$imm$$constant;
8955 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
8956 int pcon = (con > 0) ? con : -con;
8957 Label Lfast, Lpos, Ldone;
8959 __ movl($tmp$$Register, pcon);
8960 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
8961 __ jccb(Assembler::above, Lfast); // src is positive and result fits into 32 bit
8963 __ movl($tmp2$$Register, $dst$$Register); // save
8964 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8965 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
8966 __ jccb(Assembler::lessEqual, Lpos); // result is positive
8968 // Negative dividend.
8969 // convert value to positive to use unsigned division
8970 __ lneg($dst$$Register, $tmp2$$Register);
8971 __ divl($tmp$$Register);
8972 __ movl($dst$$Register, $tmp2$$Register);
8973 __ divl($tmp$$Register);
8974 // revert remainder back to negative
8975 __ negl(HIGH_FROM_LOW($dst$$Register));
8976 __ jmpb(Ldone);
8978 __ bind(Lpos);
8979 __ divl($tmp$$Register);
8980 __ movl($dst$$Register, $tmp2$$Register);
8982 __ bind(Lfast);
8983 // fast path: src is positive
8984 __ divl($tmp$$Register);
8986 __ bind(Ldone);
8987 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
8988 __ sarl(HIGH_FROM_LOW($dst$$Register), 31); // result sign
8990 %}
8991 ins_pipe( pipe_slow );
8992 %}
8994 // Integer Shift Instructions
8995 // Shift Left by one
8996 instruct shlI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
8997 match(Set dst (LShiftI dst shift));
8998 effect(KILL cr);
9000 size(2);
9001 format %{ "SHL $dst,$shift" %}
9002 opcode(0xD1, 0x4); /* D1 /4 */
9003 ins_encode( OpcP, RegOpc( dst ) );
9004 ins_pipe( ialu_reg );
9005 %}
9007 // Shift Left by 8-bit immediate
9008 instruct salI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9009 match(Set dst (LShiftI dst shift));
9010 effect(KILL cr);
9012 size(3);
9013 format %{ "SHL $dst,$shift" %}
9014 opcode(0xC1, 0x4); /* C1 /4 ib */
9015 ins_encode( RegOpcImm( dst, shift) );
9016 ins_pipe( ialu_reg );
9017 %}
9019 // Shift Left by variable
9020 instruct salI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9021 match(Set dst (LShiftI dst shift));
9022 effect(KILL cr);
9024 size(2);
9025 format %{ "SHL $dst,$shift" %}
9026 opcode(0xD3, 0x4); /* D3 /4 */
9027 ins_encode( OpcP, RegOpc( dst ) );
9028 ins_pipe( ialu_reg_reg );
9029 %}
9031 // Arithmetic shift right by one
9032 instruct sarI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9033 match(Set dst (RShiftI dst shift));
9034 effect(KILL cr);
9036 size(2);
9037 format %{ "SAR $dst,$shift" %}
9038 opcode(0xD1, 0x7); /* D1 /7 */
9039 ins_encode( OpcP, RegOpc( dst ) );
9040 ins_pipe( ialu_reg );
9041 %}
9043 // Arithmetic shift right by one
9044 instruct sarI_mem_1(memory dst, immI1 shift, eFlagsReg cr) %{
9045 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
9046 effect(KILL cr);
9047 format %{ "SAR $dst,$shift" %}
9048 opcode(0xD1, 0x7); /* D1 /7 */
9049 ins_encode( OpcP, RMopc_Mem(secondary,dst) );
9050 ins_pipe( ialu_mem_imm );
9051 %}
9053 // Arithmetic Shift Right by 8-bit immediate
9054 instruct sarI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9055 match(Set dst (RShiftI dst shift));
9056 effect(KILL cr);
9058 size(3);
9059 format %{ "SAR $dst,$shift" %}
9060 opcode(0xC1, 0x7); /* C1 /7 ib */
9061 ins_encode( RegOpcImm( dst, shift ) );
9062 ins_pipe( ialu_mem_imm );
9063 %}
9065 // Arithmetic Shift Right by 8-bit immediate
9066 instruct sarI_mem_imm(memory dst, immI8 shift, eFlagsReg cr) %{
9067 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
9068 effect(KILL cr);
9070 format %{ "SAR $dst,$shift" %}
9071 opcode(0xC1, 0x7); /* C1 /7 ib */
9072 ins_encode( OpcP, RMopc_Mem(secondary, dst ), Con8or32( shift ) );
9073 ins_pipe( ialu_mem_imm );
9074 %}
9076 // Arithmetic Shift Right by variable
9077 instruct sarI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9078 match(Set dst (RShiftI dst shift));
9079 effect(KILL cr);
9081 size(2);
9082 format %{ "SAR $dst,$shift" %}
9083 opcode(0xD3, 0x7); /* D3 /7 */
9084 ins_encode( OpcP, RegOpc( dst ) );
9085 ins_pipe( ialu_reg_reg );
9086 %}
9088 // Logical shift right by one
9089 instruct shrI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9090 match(Set dst (URShiftI dst shift));
9091 effect(KILL cr);
9093 size(2);
9094 format %{ "SHR $dst,$shift" %}
9095 opcode(0xD1, 0x5); /* D1 /5 */
9096 ins_encode( OpcP, RegOpc( dst ) );
9097 ins_pipe( ialu_reg );
9098 %}
9100 // Logical Shift Right by 8-bit immediate
9101 instruct shrI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
9102 match(Set dst (URShiftI dst shift));
9103 effect(KILL cr);
9105 size(3);
9106 format %{ "SHR $dst,$shift" %}
9107 opcode(0xC1, 0x5); /* C1 /5 ib */
9108 ins_encode( RegOpcImm( dst, shift) );
9109 ins_pipe( ialu_reg );
9110 %}
9113 // Logical Shift Right by 24, followed by Arithmetic Shift Left by 24.
9114 // This idiom is used by the compiler for the i2b bytecode.
9115 instruct i2b(eRegI dst, xRegI src, immI_24 twentyfour) %{
9116 match(Set dst (RShiftI (LShiftI src twentyfour) twentyfour));
9118 size(3);
9119 format %{ "MOVSX $dst,$src :8" %}
9120 ins_encode %{
9121 __ movsbl($dst$$Register, $src$$Register);
9122 %}
9123 ins_pipe(ialu_reg_reg);
9124 %}
9126 // Logical Shift Right by 16, followed by Arithmetic Shift Left by 16.
9127 // This idiom is used by the compiler the i2s bytecode.
9128 instruct i2s(eRegI dst, xRegI src, immI_16 sixteen) %{
9129 match(Set dst (RShiftI (LShiftI src sixteen) sixteen));
9131 size(3);
9132 format %{ "MOVSX $dst,$src :16" %}
9133 ins_encode %{
9134 __ movswl($dst$$Register, $src$$Register);
9135 %}
9136 ins_pipe(ialu_reg_reg);
9137 %}
9140 // Logical Shift Right by variable
9141 instruct shrI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
9142 match(Set dst (URShiftI dst shift));
9143 effect(KILL cr);
9145 size(2);
9146 format %{ "SHR $dst,$shift" %}
9147 opcode(0xD3, 0x5); /* D3 /5 */
9148 ins_encode( OpcP, RegOpc( dst ) );
9149 ins_pipe( ialu_reg_reg );
9150 %}
9153 //----------Logical Instructions-----------------------------------------------
9154 //----------Integer Logical Instructions---------------------------------------
9155 // And Instructions
9156 // And Register with Register
9157 instruct andI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9158 match(Set dst (AndI dst src));
9159 effect(KILL cr);
9161 size(2);
9162 format %{ "AND $dst,$src" %}
9163 opcode(0x23);
9164 ins_encode( OpcP, RegReg( dst, src) );
9165 ins_pipe( ialu_reg_reg );
9166 %}
9168 // And Register with Immediate
9169 instruct andI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9170 match(Set dst (AndI dst src));
9171 effect(KILL cr);
9173 format %{ "AND $dst,$src" %}
9174 opcode(0x81,0x04); /* Opcode 81 /4 */
9175 // ins_encode( RegImm( dst, src) );
9176 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9177 ins_pipe( ialu_reg );
9178 %}
9180 // And Register with Memory
9181 instruct andI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9182 match(Set dst (AndI dst (LoadI src)));
9183 effect(KILL cr);
9185 ins_cost(125);
9186 format %{ "AND $dst,$src" %}
9187 opcode(0x23);
9188 ins_encode( OpcP, RegMem( dst, src) );
9189 ins_pipe( ialu_reg_mem );
9190 %}
9192 // And Memory with Register
9193 instruct andI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9194 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9195 effect(KILL cr);
9197 ins_cost(150);
9198 format %{ "AND $dst,$src" %}
9199 opcode(0x21); /* Opcode 21 /r */
9200 ins_encode( OpcP, RegMem( src, dst ) );
9201 ins_pipe( ialu_mem_reg );
9202 %}
9204 // And Memory with Immediate
9205 instruct andI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9206 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9207 effect(KILL cr);
9209 ins_cost(125);
9210 format %{ "AND $dst,$src" %}
9211 opcode(0x81, 0x4); /* Opcode 81 /4 id */
9212 // ins_encode( MemImm( dst, src) );
9213 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9214 ins_pipe( ialu_mem_imm );
9215 %}
9217 // Or Instructions
9218 // Or Register with Register
9219 instruct orI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9220 match(Set dst (OrI dst src));
9221 effect(KILL cr);
9223 size(2);
9224 format %{ "OR $dst,$src" %}
9225 opcode(0x0B);
9226 ins_encode( OpcP, RegReg( dst, src) );
9227 ins_pipe( ialu_reg_reg );
9228 %}
9230 instruct orI_eReg_castP2X(eRegI dst, eRegP src, eFlagsReg cr) %{
9231 match(Set dst (OrI dst (CastP2X src)));
9232 effect(KILL cr);
9234 size(2);
9235 format %{ "OR $dst,$src" %}
9236 opcode(0x0B);
9237 ins_encode( OpcP, RegReg( dst, src) );
9238 ins_pipe( ialu_reg_reg );
9239 %}
9242 // Or Register with Immediate
9243 instruct orI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9244 match(Set dst (OrI dst src));
9245 effect(KILL cr);
9247 format %{ "OR $dst,$src" %}
9248 opcode(0x81,0x01); /* Opcode 81 /1 id */
9249 // ins_encode( RegImm( dst, src) );
9250 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9251 ins_pipe( ialu_reg );
9252 %}
9254 // Or Register with Memory
9255 instruct orI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9256 match(Set dst (OrI dst (LoadI src)));
9257 effect(KILL cr);
9259 ins_cost(125);
9260 format %{ "OR $dst,$src" %}
9261 opcode(0x0B);
9262 ins_encode( OpcP, RegMem( dst, src) );
9263 ins_pipe( ialu_reg_mem );
9264 %}
9266 // Or Memory with Register
9267 instruct orI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9268 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9269 effect(KILL cr);
9271 ins_cost(150);
9272 format %{ "OR $dst,$src" %}
9273 opcode(0x09); /* Opcode 09 /r */
9274 ins_encode( OpcP, RegMem( src, dst ) );
9275 ins_pipe( ialu_mem_reg );
9276 %}
9278 // Or Memory with Immediate
9279 instruct orI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9280 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9281 effect(KILL cr);
9283 ins_cost(125);
9284 format %{ "OR $dst,$src" %}
9285 opcode(0x81,0x1); /* Opcode 81 /1 id */
9286 // ins_encode( MemImm( dst, src) );
9287 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9288 ins_pipe( ialu_mem_imm );
9289 %}
9291 // ROL/ROR
9292 // ROL expand
9293 instruct rolI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9294 effect(USE_DEF dst, USE shift, KILL cr);
9296 format %{ "ROL $dst, $shift" %}
9297 opcode(0xD1, 0x0); /* Opcode D1 /0 */
9298 ins_encode( OpcP, RegOpc( dst ));
9299 ins_pipe( ialu_reg );
9300 %}
9302 instruct rolI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9303 effect(USE_DEF dst, USE shift, KILL cr);
9305 format %{ "ROL $dst, $shift" %}
9306 opcode(0xC1, 0x0); /*Opcode /C1 /0 */
9307 ins_encode( RegOpcImm(dst, shift) );
9308 ins_pipe(ialu_reg);
9309 %}
9311 instruct rolI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr) %{
9312 effect(USE_DEF dst, USE shift, KILL cr);
9314 format %{ "ROL $dst, $shift" %}
9315 opcode(0xD3, 0x0); /* Opcode D3 /0 */
9316 ins_encode(OpcP, RegOpc(dst));
9317 ins_pipe( ialu_reg_reg );
9318 %}
9319 // end of ROL expand
9321 // ROL 32bit by one once
9322 instruct rolI_eReg_i1(eRegI dst, immI1 lshift, immI_M1 rshift, eFlagsReg cr) %{
9323 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9325 expand %{
9326 rolI_eReg_imm1(dst, lshift, cr);
9327 %}
9328 %}
9330 // ROL 32bit var by imm8 once
9331 instruct rolI_eReg_i8(eRegI dst, immI8 lshift, immI8 rshift, eFlagsReg cr) %{
9332 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9333 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9335 expand %{
9336 rolI_eReg_imm8(dst, lshift, cr);
9337 %}
9338 %}
9340 // ROL 32bit var by var once
9341 instruct rolI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9342 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI zero shift))));
9344 expand %{
9345 rolI_eReg_CL(dst, shift, cr);
9346 %}
9347 %}
9349 // ROL 32bit var by var once
9350 instruct rolI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9351 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI c32 shift))));
9353 expand %{
9354 rolI_eReg_CL(dst, shift, cr);
9355 %}
9356 %}
9358 // ROR expand
9359 instruct rorI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9360 effect(USE_DEF dst, USE shift, KILL cr);
9362 format %{ "ROR $dst, $shift" %}
9363 opcode(0xD1,0x1); /* Opcode D1 /1 */
9364 ins_encode( OpcP, RegOpc( dst ) );
9365 ins_pipe( ialu_reg );
9366 %}
9368 instruct rorI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9369 effect (USE_DEF dst, USE shift, KILL cr);
9371 format %{ "ROR $dst, $shift" %}
9372 opcode(0xC1, 0x1); /* Opcode /C1 /1 ib */
9373 ins_encode( RegOpcImm(dst, shift) );
9374 ins_pipe( ialu_reg );
9375 %}
9377 instruct rorI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr)%{
9378 effect(USE_DEF dst, USE shift, KILL cr);
9380 format %{ "ROR $dst, $shift" %}
9381 opcode(0xD3, 0x1); /* Opcode D3 /1 */
9382 ins_encode(OpcP, RegOpc(dst));
9383 ins_pipe( ialu_reg_reg );
9384 %}
9385 // end of ROR expand
9387 // ROR right once
9388 instruct rorI_eReg_i1(eRegI dst, immI1 rshift, immI_M1 lshift, eFlagsReg cr) %{
9389 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9391 expand %{
9392 rorI_eReg_imm1(dst, rshift, cr);
9393 %}
9394 %}
9396 // ROR 32bit by immI8 once
9397 instruct rorI_eReg_i8(eRegI dst, immI8 rshift, immI8 lshift, eFlagsReg cr) %{
9398 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9399 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9401 expand %{
9402 rorI_eReg_imm8(dst, rshift, cr);
9403 %}
9404 %}
9406 // ROR 32bit var by var once
9407 instruct rorI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9408 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI zero shift))));
9410 expand %{
9411 rorI_eReg_CL(dst, shift, cr);
9412 %}
9413 %}
9415 // ROR 32bit var by var once
9416 instruct rorI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9417 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI c32 shift))));
9419 expand %{
9420 rorI_eReg_CL(dst, shift, cr);
9421 %}
9422 %}
9424 // Xor Instructions
9425 // Xor Register with Register
9426 instruct xorI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9427 match(Set dst (XorI dst src));
9428 effect(KILL cr);
9430 size(2);
9431 format %{ "XOR $dst,$src" %}
9432 opcode(0x33);
9433 ins_encode( OpcP, RegReg( dst, src) );
9434 ins_pipe( ialu_reg_reg );
9435 %}
9437 // Xor Register with Immediate -1
9438 instruct xorI_eReg_im1(eRegI dst, immI_M1 imm) %{
9439 match(Set dst (XorI dst imm));
9441 size(2);
9442 format %{ "NOT $dst" %}
9443 ins_encode %{
9444 __ notl($dst$$Register);
9445 %}
9446 ins_pipe( ialu_reg );
9447 %}
9449 // Xor Register with Immediate
9450 instruct xorI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9451 match(Set dst (XorI dst src));
9452 effect(KILL cr);
9454 format %{ "XOR $dst,$src" %}
9455 opcode(0x81,0x06); /* Opcode 81 /6 id */
9456 // ins_encode( RegImm( dst, src) );
9457 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9458 ins_pipe( ialu_reg );
9459 %}
9461 // Xor Register with Memory
9462 instruct xorI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9463 match(Set dst (XorI dst (LoadI src)));
9464 effect(KILL cr);
9466 ins_cost(125);
9467 format %{ "XOR $dst,$src" %}
9468 opcode(0x33);
9469 ins_encode( OpcP, RegMem(dst, src) );
9470 ins_pipe( ialu_reg_mem );
9471 %}
9473 // Xor Memory with Register
9474 instruct xorI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9475 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9476 effect(KILL cr);
9478 ins_cost(150);
9479 format %{ "XOR $dst,$src" %}
9480 opcode(0x31); /* Opcode 31 /r */
9481 ins_encode( OpcP, RegMem( src, dst ) );
9482 ins_pipe( ialu_mem_reg );
9483 %}
9485 // Xor Memory with Immediate
9486 instruct xorI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9487 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9488 effect(KILL cr);
9490 ins_cost(125);
9491 format %{ "XOR $dst,$src" %}
9492 opcode(0x81,0x6); /* Opcode 81 /6 id */
9493 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9494 ins_pipe( ialu_mem_imm );
9495 %}
9497 //----------Convert Int to Boolean---------------------------------------------
9499 instruct movI_nocopy(eRegI dst, eRegI src) %{
9500 effect( DEF dst, USE src );
9501 format %{ "MOV $dst,$src" %}
9502 ins_encode( enc_Copy( dst, src) );
9503 ins_pipe( ialu_reg_reg );
9504 %}
9506 instruct ci2b( eRegI dst, eRegI src, eFlagsReg cr ) %{
9507 effect( USE_DEF dst, USE src, KILL cr );
9509 size(4);
9510 format %{ "NEG $dst\n\t"
9511 "ADC $dst,$src" %}
9512 ins_encode( neg_reg(dst),
9513 OpcRegReg(0x13,dst,src) );
9514 ins_pipe( ialu_reg_reg_long );
9515 %}
9517 instruct convI2B( eRegI dst, eRegI src, eFlagsReg cr ) %{
9518 match(Set dst (Conv2B src));
9520 expand %{
9521 movI_nocopy(dst,src);
9522 ci2b(dst,src,cr);
9523 %}
9524 %}
9526 instruct movP_nocopy(eRegI dst, eRegP src) %{
9527 effect( DEF dst, USE src );
9528 format %{ "MOV $dst,$src" %}
9529 ins_encode( enc_Copy( dst, src) );
9530 ins_pipe( ialu_reg_reg );
9531 %}
9533 instruct cp2b( eRegI dst, eRegP src, eFlagsReg cr ) %{
9534 effect( USE_DEF dst, USE src, KILL cr );
9535 format %{ "NEG $dst\n\t"
9536 "ADC $dst,$src" %}
9537 ins_encode( neg_reg(dst),
9538 OpcRegReg(0x13,dst,src) );
9539 ins_pipe( ialu_reg_reg_long );
9540 %}
9542 instruct convP2B( eRegI dst, eRegP src, eFlagsReg cr ) %{
9543 match(Set dst (Conv2B src));
9545 expand %{
9546 movP_nocopy(dst,src);
9547 cp2b(dst,src,cr);
9548 %}
9549 %}
9551 instruct cmpLTMask( eCXRegI dst, ncxRegI p, ncxRegI q, eFlagsReg cr ) %{
9552 match(Set dst (CmpLTMask p q));
9553 effect( KILL cr );
9554 ins_cost(400);
9556 // SETlt can only use low byte of EAX,EBX, ECX, or EDX as destination
9557 format %{ "XOR $dst,$dst\n\t"
9558 "CMP $p,$q\n\t"
9559 "SETlt $dst\n\t"
9560 "NEG $dst" %}
9561 ins_encode( OpcRegReg(0x33,dst,dst),
9562 OpcRegReg(0x3B,p,q),
9563 setLT_reg(dst), neg_reg(dst) );
9564 ins_pipe( pipe_slow );
9565 %}
9567 instruct cmpLTMask0( eRegI dst, immI0 zero, eFlagsReg cr ) %{
9568 match(Set dst (CmpLTMask dst zero));
9569 effect( DEF dst, KILL cr );
9570 ins_cost(100);
9572 format %{ "SAR $dst,31" %}
9573 opcode(0xC1, 0x7); /* C1 /7 ib */
9574 ins_encode( RegOpcImm( dst, 0x1F ) );
9575 ins_pipe( ialu_reg );
9576 %}
9579 instruct cadd_cmpLTMask( ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp, eFlagsReg cr ) %{
9580 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q)));
9581 effect( KILL tmp, KILL cr );
9582 ins_cost(400);
9583 // annoyingly, $tmp has no edges so you cant ask for it in
9584 // any format or encoding
9585 format %{ "SUB $p,$q\n\t"
9586 "SBB ECX,ECX\n\t"
9587 "AND ECX,$y\n\t"
9588 "ADD $p,ECX" %}
9589 ins_encode( enc_cmpLTP(p,q,y,tmp) );
9590 ins_pipe( pipe_cmplt );
9591 %}
9593 /* If I enable this, I encourage spilling in the inner loop of compress.
9594 instruct cadd_cmpLTMask_mem( ncxRegI p, ncxRegI q, memory y, eCXRegI tmp, eFlagsReg cr ) %{
9595 match(Set p (AddI (AndI (CmpLTMask p q) (LoadI y)) (SubI p q)));
9596 effect( USE_KILL tmp, KILL cr );
9597 ins_cost(400);
9599 format %{ "SUB $p,$q\n\t"
9600 "SBB ECX,ECX\n\t"
9601 "AND ECX,$y\n\t"
9602 "ADD $p,ECX" %}
9603 ins_encode( enc_cmpLTP_mem(p,q,y,tmp) );
9604 %}
9605 */
9607 //----------Long Instructions------------------------------------------------
9608 // Add Long Register with Register
9609 instruct addL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9610 match(Set dst (AddL dst src));
9611 effect(KILL cr);
9612 ins_cost(200);
9613 format %{ "ADD $dst.lo,$src.lo\n\t"
9614 "ADC $dst.hi,$src.hi" %}
9615 opcode(0x03, 0x13);
9616 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9617 ins_pipe( ialu_reg_reg_long );
9618 %}
9620 // Add Long Register with Immediate
9621 instruct addL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9622 match(Set dst (AddL dst src));
9623 effect(KILL cr);
9624 format %{ "ADD $dst.lo,$src.lo\n\t"
9625 "ADC $dst.hi,$src.hi" %}
9626 opcode(0x81,0x00,0x02); /* Opcode 81 /0, 81 /2 */
9627 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9628 ins_pipe( ialu_reg_long );
9629 %}
9631 // Add Long Register with Memory
9632 instruct addL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9633 match(Set dst (AddL dst (LoadL mem)));
9634 effect(KILL cr);
9635 ins_cost(125);
9636 format %{ "ADD $dst.lo,$mem\n\t"
9637 "ADC $dst.hi,$mem+4" %}
9638 opcode(0x03, 0x13);
9639 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9640 ins_pipe( ialu_reg_long_mem );
9641 %}
9643 // Subtract Long Register with Register.
9644 instruct subL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9645 match(Set dst (SubL dst src));
9646 effect(KILL cr);
9647 ins_cost(200);
9648 format %{ "SUB $dst.lo,$src.lo\n\t"
9649 "SBB $dst.hi,$src.hi" %}
9650 opcode(0x2B, 0x1B);
9651 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9652 ins_pipe( ialu_reg_reg_long );
9653 %}
9655 // Subtract Long Register with Immediate
9656 instruct subL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9657 match(Set dst (SubL dst src));
9658 effect(KILL cr);
9659 format %{ "SUB $dst.lo,$src.lo\n\t"
9660 "SBB $dst.hi,$src.hi" %}
9661 opcode(0x81,0x05,0x03); /* Opcode 81 /5, 81 /3 */
9662 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9663 ins_pipe( ialu_reg_long );
9664 %}
9666 // Subtract Long Register with Memory
9667 instruct subL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9668 match(Set dst (SubL dst (LoadL mem)));
9669 effect(KILL cr);
9670 ins_cost(125);
9671 format %{ "SUB $dst.lo,$mem\n\t"
9672 "SBB $dst.hi,$mem+4" %}
9673 opcode(0x2B, 0x1B);
9674 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9675 ins_pipe( ialu_reg_long_mem );
9676 %}
9678 instruct negL_eReg(eRegL dst, immL0 zero, eFlagsReg cr) %{
9679 match(Set dst (SubL zero dst));
9680 effect(KILL cr);
9681 ins_cost(300);
9682 format %{ "NEG $dst.hi\n\tNEG $dst.lo\n\tSBB $dst.hi,0" %}
9683 ins_encode( neg_long(dst) );
9684 ins_pipe( ialu_reg_reg_long );
9685 %}
9687 // And Long Register with Register
9688 instruct andL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9689 match(Set dst (AndL dst src));
9690 effect(KILL cr);
9691 format %{ "AND $dst.lo,$src.lo\n\t"
9692 "AND $dst.hi,$src.hi" %}
9693 opcode(0x23,0x23);
9694 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9695 ins_pipe( ialu_reg_reg_long );
9696 %}
9698 // And Long Register with Immediate
9699 instruct andL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9700 match(Set dst (AndL dst src));
9701 effect(KILL cr);
9702 format %{ "AND $dst.lo,$src.lo\n\t"
9703 "AND $dst.hi,$src.hi" %}
9704 opcode(0x81,0x04,0x04); /* Opcode 81 /4, 81 /4 */
9705 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9706 ins_pipe( ialu_reg_long );
9707 %}
9709 // And Long Register with Memory
9710 instruct andL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9711 match(Set dst (AndL dst (LoadL mem)));
9712 effect(KILL cr);
9713 ins_cost(125);
9714 format %{ "AND $dst.lo,$mem\n\t"
9715 "AND $dst.hi,$mem+4" %}
9716 opcode(0x23, 0x23);
9717 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9718 ins_pipe( ialu_reg_long_mem );
9719 %}
9721 // Or Long Register with Register
9722 instruct orl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9723 match(Set dst (OrL dst src));
9724 effect(KILL cr);
9725 format %{ "OR $dst.lo,$src.lo\n\t"
9726 "OR $dst.hi,$src.hi" %}
9727 opcode(0x0B,0x0B);
9728 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9729 ins_pipe( ialu_reg_reg_long );
9730 %}
9732 // Or Long Register with Immediate
9733 instruct orl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9734 match(Set dst (OrL dst src));
9735 effect(KILL cr);
9736 format %{ "OR $dst.lo,$src.lo\n\t"
9737 "OR $dst.hi,$src.hi" %}
9738 opcode(0x81,0x01,0x01); /* Opcode 81 /1, 81 /1 */
9739 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9740 ins_pipe( ialu_reg_long );
9741 %}
9743 // Or Long Register with Memory
9744 instruct orl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9745 match(Set dst (OrL dst (LoadL mem)));
9746 effect(KILL cr);
9747 ins_cost(125);
9748 format %{ "OR $dst.lo,$mem\n\t"
9749 "OR $dst.hi,$mem+4" %}
9750 opcode(0x0B,0x0B);
9751 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9752 ins_pipe( ialu_reg_long_mem );
9753 %}
9755 // Xor Long Register with Register
9756 instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9757 match(Set dst (XorL dst src));
9758 effect(KILL cr);
9759 format %{ "XOR $dst.lo,$src.lo\n\t"
9760 "XOR $dst.hi,$src.hi" %}
9761 opcode(0x33,0x33);
9762 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9763 ins_pipe( ialu_reg_reg_long );
9764 %}
9766 // Xor Long Register with Immediate -1
9767 instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
9768 match(Set dst (XorL dst imm));
9769 format %{ "NOT $dst.lo\n\t"
9770 "NOT $dst.hi" %}
9771 ins_encode %{
9772 __ notl($dst$$Register);
9773 __ notl(HIGH_FROM_LOW($dst$$Register));
9774 %}
9775 ins_pipe( ialu_reg_long );
9776 %}
9778 // Xor Long Register with Immediate
9779 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9780 match(Set dst (XorL dst src));
9781 effect(KILL cr);
9782 format %{ "XOR $dst.lo,$src.lo\n\t"
9783 "XOR $dst.hi,$src.hi" %}
9784 opcode(0x81,0x06,0x06); /* Opcode 81 /6, 81 /6 */
9785 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9786 ins_pipe( ialu_reg_long );
9787 %}
9789 // Xor Long Register with Memory
9790 instruct xorl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9791 match(Set dst (XorL dst (LoadL mem)));
9792 effect(KILL cr);
9793 ins_cost(125);
9794 format %{ "XOR $dst.lo,$mem\n\t"
9795 "XOR $dst.hi,$mem+4" %}
9796 opcode(0x33,0x33);
9797 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9798 ins_pipe( ialu_reg_long_mem );
9799 %}
9801 // Shift Left Long by 1
9802 instruct shlL_eReg_1(eRegL dst, immI_1 cnt, eFlagsReg cr) %{
9803 predicate(UseNewLongLShift);
9804 match(Set dst (LShiftL dst cnt));
9805 effect(KILL cr);
9806 ins_cost(100);
9807 format %{ "ADD $dst.lo,$dst.lo\n\t"
9808 "ADC $dst.hi,$dst.hi" %}
9809 ins_encode %{
9810 __ addl($dst$$Register,$dst$$Register);
9811 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9812 %}
9813 ins_pipe( ialu_reg_long );
9814 %}
9816 // Shift Left Long by 2
9817 instruct shlL_eReg_2(eRegL dst, immI_2 cnt, eFlagsReg cr) %{
9818 predicate(UseNewLongLShift);
9819 match(Set dst (LShiftL dst cnt));
9820 effect(KILL cr);
9821 ins_cost(100);
9822 format %{ "ADD $dst.lo,$dst.lo\n\t"
9823 "ADC $dst.hi,$dst.hi\n\t"
9824 "ADD $dst.lo,$dst.lo\n\t"
9825 "ADC $dst.hi,$dst.hi" %}
9826 ins_encode %{
9827 __ addl($dst$$Register,$dst$$Register);
9828 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9829 __ addl($dst$$Register,$dst$$Register);
9830 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9831 %}
9832 ins_pipe( ialu_reg_long );
9833 %}
9835 // Shift Left Long by 3
9836 instruct shlL_eReg_3(eRegL dst, immI_3 cnt, eFlagsReg cr) %{
9837 predicate(UseNewLongLShift);
9838 match(Set dst (LShiftL dst cnt));
9839 effect(KILL cr);
9840 ins_cost(100);
9841 format %{ "ADD $dst.lo,$dst.lo\n\t"
9842 "ADC $dst.hi,$dst.hi\n\t"
9843 "ADD $dst.lo,$dst.lo\n\t"
9844 "ADC $dst.hi,$dst.hi\n\t"
9845 "ADD $dst.lo,$dst.lo\n\t"
9846 "ADC $dst.hi,$dst.hi" %}
9847 ins_encode %{
9848 __ addl($dst$$Register,$dst$$Register);
9849 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9850 __ addl($dst$$Register,$dst$$Register);
9851 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9852 __ addl($dst$$Register,$dst$$Register);
9853 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9854 %}
9855 ins_pipe( ialu_reg_long );
9856 %}
9858 // Shift Left Long by 1-31
9859 instruct shlL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9860 match(Set dst (LShiftL dst cnt));
9861 effect(KILL cr);
9862 ins_cost(200);
9863 format %{ "SHLD $dst.hi,$dst.lo,$cnt\n\t"
9864 "SHL $dst.lo,$cnt" %}
9865 opcode(0xC1, 0x4, 0xA4); /* 0F/A4, then C1 /4 ib */
9866 ins_encode( move_long_small_shift(dst,cnt) );
9867 ins_pipe( ialu_reg_long );
9868 %}
9870 // Shift Left Long by 32-63
9871 instruct shlL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9872 match(Set dst (LShiftL dst cnt));
9873 effect(KILL cr);
9874 ins_cost(300);
9875 format %{ "MOV $dst.hi,$dst.lo\n"
9876 "\tSHL $dst.hi,$cnt-32\n"
9877 "\tXOR $dst.lo,$dst.lo" %}
9878 opcode(0xC1, 0x4); /* C1 /4 ib */
9879 ins_encode( move_long_big_shift_clr(dst,cnt) );
9880 ins_pipe( ialu_reg_long );
9881 %}
9883 // Shift Left Long by variable
9884 instruct salL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9885 match(Set dst (LShiftL dst shift));
9886 effect(KILL cr);
9887 ins_cost(500+200);
9888 size(17);
9889 format %{ "TEST $shift,32\n\t"
9890 "JEQ,s small\n\t"
9891 "MOV $dst.hi,$dst.lo\n\t"
9892 "XOR $dst.lo,$dst.lo\n"
9893 "small:\tSHLD $dst.hi,$dst.lo,$shift\n\t"
9894 "SHL $dst.lo,$shift" %}
9895 ins_encode( shift_left_long( dst, shift ) );
9896 ins_pipe( pipe_slow );
9897 %}
9899 // Shift Right Long by 1-31
9900 instruct shrL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9901 match(Set dst (URShiftL dst cnt));
9902 effect(KILL cr);
9903 ins_cost(200);
9904 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9905 "SHR $dst.hi,$cnt" %}
9906 opcode(0xC1, 0x5, 0xAC); /* 0F/AC, then C1 /5 ib */
9907 ins_encode( move_long_small_shift(dst,cnt) );
9908 ins_pipe( ialu_reg_long );
9909 %}
9911 // Shift Right Long by 32-63
9912 instruct shrL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9913 match(Set dst (URShiftL dst cnt));
9914 effect(KILL cr);
9915 ins_cost(300);
9916 format %{ "MOV $dst.lo,$dst.hi\n"
9917 "\tSHR $dst.lo,$cnt-32\n"
9918 "\tXOR $dst.hi,$dst.hi" %}
9919 opcode(0xC1, 0x5); /* C1 /5 ib */
9920 ins_encode( move_long_big_shift_clr(dst,cnt) );
9921 ins_pipe( ialu_reg_long );
9922 %}
9924 // Shift Right Long by variable
9925 instruct shrL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9926 match(Set dst (URShiftL dst shift));
9927 effect(KILL cr);
9928 ins_cost(600);
9929 size(17);
9930 format %{ "TEST $shift,32\n\t"
9931 "JEQ,s small\n\t"
9932 "MOV $dst.lo,$dst.hi\n\t"
9933 "XOR $dst.hi,$dst.hi\n"
9934 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9935 "SHR $dst.hi,$shift" %}
9936 ins_encode( shift_right_long( dst, shift ) );
9937 ins_pipe( pipe_slow );
9938 %}
9940 // Shift Right Long by 1-31
9941 instruct sarL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9942 match(Set dst (RShiftL dst cnt));
9943 effect(KILL cr);
9944 ins_cost(200);
9945 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9946 "SAR $dst.hi,$cnt" %}
9947 opcode(0xC1, 0x7, 0xAC); /* 0F/AC, then C1 /7 ib */
9948 ins_encode( move_long_small_shift(dst,cnt) );
9949 ins_pipe( ialu_reg_long );
9950 %}
9952 // Shift Right Long by 32-63
9953 instruct sarL_eReg_32_63( eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9954 match(Set dst (RShiftL dst cnt));
9955 effect(KILL cr);
9956 ins_cost(300);
9957 format %{ "MOV $dst.lo,$dst.hi\n"
9958 "\tSAR $dst.lo,$cnt-32\n"
9959 "\tSAR $dst.hi,31" %}
9960 opcode(0xC1, 0x7); /* C1 /7 ib */
9961 ins_encode( move_long_big_shift_sign(dst,cnt) );
9962 ins_pipe( ialu_reg_long );
9963 %}
9965 // Shift Right arithmetic Long by variable
9966 instruct sarL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9967 match(Set dst (RShiftL dst shift));
9968 effect(KILL cr);
9969 ins_cost(600);
9970 size(18);
9971 format %{ "TEST $shift,32\n\t"
9972 "JEQ,s small\n\t"
9973 "MOV $dst.lo,$dst.hi\n\t"
9974 "SAR $dst.hi,31\n"
9975 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9976 "SAR $dst.hi,$shift" %}
9977 ins_encode( shift_right_arith_long( dst, shift ) );
9978 ins_pipe( pipe_slow );
9979 %}
9982 //----------Double Instructions------------------------------------------------
9983 // Double Math
9985 // Compare & branch
9987 // P6 version of float compare, sets condition codes in EFLAGS
9988 instruct cmpD_cc_P6(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
9989 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9990 match(Set cr (CmpD src1 src2));
9991 effect(KILL rax);
9992 ins_cost(150);
9993 format %{ "FLD $src1\n\t"
9994 "FUCOMIP ST,$src2 // P6 instruction\n\t"
9995 "JNP exit\n\t"
9996 "MOV ah,1 // saw a NaN, set CF\n\t"
9997 "SAHF\n"
9998 "exit:\tNOP // avoid branch to branch" %}
9999 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10000 ins_encode( Push_Reg_D(src1),
10001 OpcP, RegOpc(src2),
10002 cmpF_P6_fixup );
10003 ins_pipe( pipe_slow );
10004 %}
10006 instruct cmpD_cc_P6CF(eFlagsRegUCF cr, regD src1, regD src2) %{
10007 predicate(VM_Version::supports_cmov() && UseSSE <=1);
10008 match(Set cr (CmpD src1 src2));
10009 ins_cost(150);
10010 format %{ "FLD $src1\n\t"
10011 "FUCOMIP ST,$src2 // P6 instruction" %}
10012 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10013 ins_encode( Push_Reg_D(src1),
10014 OpcP, RegOpc(src2));
10015 ins_pipe( pipe_slow );
10016 %}
10018 // Compare & branch
10019 instruct cmpD_cc(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
10020 predicate(UseSSE<=1);
10021 match(Set cr (CmpD src1 src2));
10022 effect(KILL rax);
10023 ins_cost(200);
10024 format %{ "FLD $src1\n\t"
10025 "FCOMp $src2\n\t"
10026 "FNSTSW AX\n\t"
10027 "TEST AX,0x400\n\t"
10028 "JZ,s flags\n\t"
10029 "MOV AH,1\t# unordered treat as LT\n"
10030 "flags:\tSAHF" %}
10031 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10032 ins_encode( Push_Reg_D(src1),
10033 OpcP, RegOpc(src2),
10034 fpu_flags);
10035 ins_pipe( pipe_slow );
10036 %}
10038 // Compare vs zero into -1,0,1
10039 instruct cmpD_0(eRegI dst, regD src1, immD0 zero, eAXRegI rax, eFlagsReg cr) %{
10040 predicate(UseSSE<=1);
10041 match(Set dst (CmpD3 src1 zero));
10042 effect(KILL cr, KILL rax);
10043 ins_cost(280);
10044 format %{ "FTSTD $dst,$src1" %}
10045 opcode(0xE4, 0xD9);
10046 ins_encode( Push_Reg_D(src1),
10047 OpcS, OpcP, PopFPU,
10048 CmpF_Result(dst));
10049 ins_pipe( pipe_slow );
10050 %}
10052 // Compare into -1,0,1
10053 instruct cmpD_reg(eRegI dst, regD src1, regD src2, eAXRegI rax, eFlagsReg cr) %{
10054 predicate(UseSSE<=1);
10055 match(Set dst (CmpD3 src1 src2));
10056 effect(KILL cr, KILL rax);
10057 ins_cost(300);
10058 format %{ "FCMPD $dst,$src1,$src2" %}
10059 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10060 ins_encode( Push_Reg_D(src1),
10061 OpcP, RegOpc(src2),
10062 CmpF_Result(dst));
10063 ins_pipe( pipe_slow );
10064 %}
10066 // float compare and set condition codes in EFLAGS by XMM regs
10067 instruct cmpXD_cc(eFlagsRegU cr, regXD dst, regXD src, eAXRegI rax) %{
10068 predicate(UseSSE>=2);
10069 match(Set cr (CmpD dst src));
10070 effect(KILL rax);
10071 ins_cost(125);
10072 format %{ "COMISD $dst,$src\n"
10073 "\tJNP exit\n"
10074 "\tMOV ah,1 // saw a NaN, set CF\n"
10075 "\tSAHF\n"
10076 "exit:\tNOP // avoid branch to branch" %}
10077 opcode(0x66, 0x0F, 0x2F);
10078 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src), cmpF_P6_fixup);
10079 ins_pipe( pipe_slow );
10080 %}
10082 instruct cmpXD_ccCF(eFlagsRegUCF cr, regXD dst, regXD src) %{
10083 predicate(UseSSE>=2);
10084 match(Set cr (CmpD dst src));
10085 ins_cost(100);
10086 format %{ "COMISD $dst,$src" %}
10087 opcode(0x66, 0x0F, 0x2F);
10088 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
10089 ins_pipe( pipe_slow );
10090 %}
10092 // float compare and set condition codes in EFLAGS by XMM regs
10093 instruct cmpXD_ccmem(eFlagsRegU cr, regXD dst, memory src, eAXRegI rax) %{
10094 predicate(UseSSE>=2);
10095 match(Set cr (CmpD dst (LoadD src)));
10096 effect(KILL rax);
10097 ins_cost(145);
10098 format %{ "COMISD $dst,$src\n"
10099 "\tJNP exit\n"
10100 "\tMOV ah,1 // saw a NaN, set CF\n"
10101 "\tSAHF\n"
10102 "exit:\tNOP // avoid branch to branch" %}
10103 opcode(0x66, 0x0F, 0x2F);
10104 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src), cmpF_P6_fixup);
10105 ins_pipe( pipe_slow );
10106 %}
10108 instruct cmpXD_ccmemCF(eFlagsRegUCF cr, regXD dst, memory src) %{
10109 predicate(UseSSE>=2);
10110 match(Set cr (CmpD dst (LoadD src)));
10111 ins_cost(100);
10112 format %{ "COMISD $dst,$src" %}
10113 opcode(0x66, 0x0F, 0x2F);
10114 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src));
10115 ins_pipe( pipe_slow );
10116 %}
10118 // Compare into -1,0,1 in XMM
10119 instruct cmpXD_reg(eRegI dst, regXD src1, regXD src2, eFlagsReg cr) %{
10120 predicate(UseSSE>=2);
10121 match(Set dst (CmpD3 src1 src2));
10122 effect(KILL cr);
10123 ins_cost(255);
10124 format %{ "XOR $dst,$dst\n"
10125 "\tCOMISD $src1,$src2\n"
10126 "\tJP,s nan\n"
10127 "\tJEQ,s exit\n"
10128 "\tJA,s inc\n"
10129 "nan:\tDEC $dst\n"
10130 "\tJMP,s exit\n"
10131 "inc:\tINC $dst\n"
10132 "exit:"
10133 %}
10134 opcode(0x66, 0x0F, 0x2F);
10135 ins_encode(Xor_Reg(dst), OpcP, OpcS, Opcode(tertiary), RegReg(src1, src2),
10136 CmpX_Result(dst));
10137 ins_pipe( pipe_slow );
10138 %}
10140 // Compare into -1,0,1 in XMM and memory
10141 instruct cmpXD_regmem(eRegI dst, regXD src1, memory mem, eFlagsReg cr) %{
10142 predicate(UseSSE>=2);
10143 match(Set dst (CmpD3 src1 (LoadD mem)));
10144 effect(KILL cr);
10145 ins_cost(275);
10146 format %{ "COMISD $src1,$mem\n"
10147 "\tMOV $dst,0\t\t# do not blow flags\n"
10148 "\tJP,s nan\n"
10149 "\tJEQ,s exit\n"
10150 "\tJA,s inc\n"
10151 "nan:\tDEC $dst\n"
10152 "\tJMP,s exit\n"
10153 "inc:\tINC $dst\n"
10154 "exit:"
10155 %}
10156 opcode(0x66, 0x0F, 0x2F);
10157 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(src1, mem),
10158 LdImmI(dst,0x0), CmpX_Result(dst));
10159 ins_pipe( pipe_slow );
10160 %}
10163 instruct subD_reg(regD dst, regD src) %{
10164 predicate (UseSSE <=1);
10165 match(Set dst (SubD dst src));
10167 format %{ "FLD $src\n\t"
10168 "DSUBp $dst,ST" %}
10169 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
10170 ins_cost(150);
10171 ins_encode( Push_Reg_D(src),
10172 OpcP, RegOpc(dst) );
10173 ins_pipe( fpu_reg_reg );
10174 %}
10176 instruct subD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10177 predicate (UseSSE <=1);
10178 match(Set dst (RoundDouble (SubD src1 src2)));
10179 ins_cost(250);
10181 format %{ "FLD $src2\n\t"
10182 "DSUB ST,$src1\n\t"
10183 "FSTP_D $dst\t# D-round" %}
10184 opcode(0xD8, 0x5);
10185 ins_encode( Push_Reg_D(src2),
10186 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10187 ins_pipe( fpu_mem_reg_reg );
10188 %}
10191 instruct subD_reg_mem(regD dst, memory src) %{
10192 predicate (UseSSE <=1);
10193 match(Set dst (SubD dst (LoadD src)));
10194 ins_cost(150);
10196 format %{ "FLD $src\n\t"
10197 "DSUBp $dst,ST" %}
10198 opcode(0xDE, 0x5, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10199 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10200 OpcP, RegOpc(dst) );
10201 ins_pipe( fpu_reg_mem );
10202 %}
10204 instruct absD_reg(regDPR1 dst, regDPR1 src) %{
10205 predicate (UseSSE<=1);
10206 match(Set dst (AbsD src));
10207 ins_cost(100);
10208 format %{ "FABS" %}
10209 opcode(0xE1, 0xD9);
10210 ins_encode( OpcS, OpcP );
10211 ins_pipe( fpu_reg_reg );
10212 %}
10214 instruct absXD_reg( regXD dst ) %{
10215 predicate(UseSSE>=2);
10216 match(Set dst (AbsD dst));
10217 format %{ "ANDPD $dst,[0x7FFFFFFFFFFFFFFF]\t# ABS D by sign masking" %}
10218 ins_encode( AbsXD_encoding(dst));
10219 ins_pipe( pipe_slow );
10220 %}
10222 instruct negD_reg(regDPR1 dst, regDPR1 src) %{
10223 predicate(UseSSE<=1);
10224 match(Set dst (NegD src));
10225 ins_cost(100);
10226 format %{ "FCHS" %}
10227 opcode(0xE0, 0xD9);
10228 ins_encode( OpcS, OpcP );
10229 ins_pipe( fpu_reg_reg );
10230 %}
10232 instruct negXD_reg( regXD dst ) %{
10233 predicate(UseSSE>=2);
10234 match(Set dst (NegD dst));
10235 format %{ "XORPD $dst,[0x8000000000000000]\t# CHS D by sign flipping" %}
10236 ins_encode %{
10237 __ xorpd($dst$$XMMRegister,
10238 ExternalAddress((address)double_signflip_pool));
10239 %}
10240 ins_pipe( pipe_slow );
10241 %}
10243 instruct addD_reg(regD dst, regD src) %{
10244 predicate(UseSSE<=1);
10245 match(Set dst (AddD dst src));
10246 format %{ "FLD $src\n\t"
10247 "DADD $dst,ST" %}
10248 size(4);
10249 ins_cost(150);
10250 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
10251 ins_encode( Push_Reg_D(src),
10252 OpcP, RegOpc(dst) );
10253 ins_pipe( fpu_reg_reg );
10254 %}
10257 instruct addD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10258 predicate(UseSSE<=1);
10259 match(Set dst (RoundDouble (AddD src1 src2)));
10260 ins_cost(250);
10262 format %{ "FLD $src2\n\t"
10263 "DADD ST,$src1\n\t"
10264 "FSTP_D $dst\t# D-round" %}
10265 opcode(0xD8, 0x0); /* D8 C0+i or D8 /0*/
10266 ins_encode( Push_Reg_D(src2),
10267 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10268 ins_pipe( fpu_mem_reg_reg );
10269 %}
10272 instruct addD_reg_mem(regD dst, memory src) %{
10273 predicate(UseSSE<=1);
10274 match(Set dst (AddD dst (LoadD src)));
10275 ins_cost(150);
10277 format %{ "FLD $src\n\t"
10278 "DADDp $dst,ST" %}
10279 opcode(0xDE, 0x0, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10280 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10281 OpcP, RegOpc(dst) );
10282 ins_pipe( fpu_reg_mem );
10283 %}
10285 // add-to-memory
10286 instruct addD_mem_reg(memory dst, regD src) %{
10287 predicate(UseSSE<=1);
10288 match(Set dst (StoreD dst (RoundDouble (AddD (LoadD dst) src))));
10289 ins_cost(150);
10291 format %{ "FLD_D $dst\n\t"
10292 "DADD ST,$src\n\t"
10293 "FST_D $dst" %}
10294 opcode(0xDD, 0x0);
10295 ins_encode( Opcode(0xDD), RMopc_Mem(0x00,dst),
10296 Opcode(0xD8), RegOpc(src),
10297 set_instruction_start,
10298 Opcode(0xDD), RMopc_Mem(0x03,dst) );
10299 ins_pipe( fpu_reg_mem );
10300 %}
10302 instruct addD_reg_imm1(regD dst, immD1 con) %{
10303 predicate(UseSSE<=1);
10304 match(Set dst (AddD dst con));
10305 ins_cost(125);
10306 format %{ "FLD1\n\t"
10307 "DADDp $dst,ST" %}
10308 ins_encode %{
10309 __ fld1();
10310 __ faddp($dst$$reg);
10311 %}
10312 ins_pipe(fpu_reg);
10313 %}
10315 instruct addD_reg_imm(regD dst, immD con) %{
10316 predicate(UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10317 match(Set dst (AddD dst con));
10318 ins_cost(200);
10319 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
10320 "DADDp $dst,ST" %}
10321 ins_encode %{
10322 __ fld_d($constantaddress($con));
10323 __ faddp($dst$$reg);
10324 %}
10325 ins_pipe(fpu_reg_mem);
10326 %}
10328 instruct addD_reg_imm_round(stackSlotD dst, regD src, immD con) %{
10329 predicate(UseSSE<=1 && _kids[0]->_kids[1]->_leaf->getd() != 0.0 && _kids[0]->_kids[1]->_leaf->getd() != 1.0 );
10330 match(Set dst (RoundDouble (AddD src con)));
10331 ins_cost(200);
10332 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
10333 "DADD ST,$src\n\t"
10334 "FSTP_D $dst\t# D-round" %}
10335 ins_encode %{
10336 __ fld_d($constantaddress($con));
10337 __ fadd($src$$reg);
10338 __ fstp_d(Address(rsp, $dst$$disp));
10339 %}
10340 ins_pipe(fpu_mem_reg_con);
10341 %}
10343 // Add two double precision floating point values in xmm
10344 instruct addXD_reg(regXD dst, regXD src) %{
10345 predicate(UseSSE>=2);
10346 match(Set dst (AddD dst src));
10347 format %{ "ADDSD $dst,$src" %}
10348 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
10349 ins_pipe( pipe_slow );
10350 %}
10352 instruct addXD_imm(regXD dst, immXD con) %{
10353 predicate(UseSSE>=2);
10354 match(Set dst (AddD dst con));
10355 format %{ "ADDSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
10356 ins_encode %{
10357 __ addsd($dst$$XMMRegister, $constantaddress($con));
10358 %}
10359 ins_pipe(pipe_slow);
10360 %}
10362 instruct addXD_mem(regXD dst, memory mem) %{
10363 predicate(UseSSE>=2);
10364 match(Set dst (AddD dst (LoadD mem)));
10365 format %{ "ADDSD $dst,$mem" %}
10366 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegMem(dst,mem));
10367 ins_pipe( pipe_slow );
10368 %}
10370 // Sub two double precision floating point values in xmm
10371 instruct subXD_reg(regXD dst, regXD src) %{
10372 predicate(UseSSE>=2);
10373 match(Set dst (SubD dst src));
10374 format %{ "SUBSD $dst,$src" %}
10375 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
10376 ins_pipe( pipe_slow );
10377 %}
10379 instruct subXD_imm(regXD dst, immXD con) %{
10380 predicate(UseSSE>=2);
10381 match(Set dst (SubD dst con));
10382 format %{ "SUBSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
10383 ins_encode %{
10384 __ subsd($dst$$XMMRegister, $constantaddress($con));
10385 %}
10386 ins_pipe(pipe_slow);
10387 %}
10389 instruct subXD_mem(regXD dst, memory mem) %{
10390 predicate(UseSSE>=2);
10391 match(Set dst (SubD dst (LoadD mem)));
10392 format %{ "SUBSD $dst,$mem" %}
10393 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
10394 ins_pipe( pipe_slow );
10395 %}
10397 // Mul two double precision floating point values in xmm
10398 instruct mulXD_reg(regXD dst, regXD src) %{
10399 predicate(UseSSE>=2);
10400 match(Set dst (MulD dst src));
10401 format %{ "MULSD $dst,$src" %}
10402 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
10403 ins_pipe( pipe_slow );
10404 %}
10406 instruct mulXD_imm(regXD dst, immXD con) %{
10407 predicate(UseSSE>=2);
10408 match(Set dst (MulD dst con));
10409 format %{ "MULSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
10410 ins_encode %{
10411 __ mulsd($dst$$XMMRegister, $constantaddress($con));
10412 %}
10413 ins_pipe(pipe_slow);
10414 %}
10416 instruct mulXD_mem(regXD dst, memory mem) %{
10417 predicate(UseSSE>=2);
10418 match(Set dst (MulD dst (LoadD mem)));
10419 format %{ "MULSD $dst,$mem" %}
10420 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
10421 ins_pipe( pipe_slow );
10422 %}
10424 // Div two double precision floating point values in xmm
10425 instruct divXD_reg(regXD dst, regXD src) %{
10426 predicate(UseSSE>=2);
10427 match(Set dst (DivD dst src));
10428 format %{ "DIVSD $dst,$src" %}
10429 opcode(0xF2, 0x0F, 0x5E);
10430 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
10431 ins_pipe( pipe_slow );
10432 %}
10434 instruct divXD_imm(regXD dst, immXD con) %{
10435 predicate(UseSSE>=2);
10436 match(Set dst (DivD dst con));
10437 format %{ "DIVSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
10438 ins_encode %{
10439 __ divsd($dst$$XMMRegister, $constantaddress($con));
10440 %}
10441 ins_pipe(pipe_slow);
10442 %}
10444 instruct divXD_mem(regXD dst, memory mem) %{
10445 predicate(UseSSE>=2);
10446 match(Set dst (DivD dst (LoadD mem)));
10447 format %{ "DIVSD $dst,$mem" %}
10448 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
10449 ins_pipe( pipe_slow );
10450 %}
10453 instruct mulD_reg(regD dst, regD src) %{
10454 predicate(UseSSE<=1);
10455 match(Set dst (MulD dst src));
10456 format %{ "FLD $src\n\t"
10457 "DMULp $dst,ST" %}
10458 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10459 ins_cost(150);
10460 ins_encode( Push_Reg_D(src),
10461 OpcP, RegOpc(dst) );
10462 ins_pipe( fpu_reg_reg );
10463 %}
10465 // Strict FP instruction biases argument before multiply then
10466 // biases result to avoid double rounding of subnormals.
10467 //
10468 // scale arg1 by multiplying arg1 by 2^(-15360)
10469 // load arg2
10470 // multiply scaled arg1 by arg2
10471 // rescale product by 2^(15360)
10472 //
10473 instruct strictfp_mulD_reg(regDPR1 dst, regnotDPR1 src) %{
10474 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10475 match(Set dst (MulD dst src));
10476 ins_cost(1); // Select this instruction for all strict FP double multiplies
10478 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10479 "DMULp $dst,ST\n\t"
10480 "FLD $src\n\t"
10481 "DMULp $dst,ST\n\t"
10482 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10483 "DMULp $dst,ST\n\t" %}
10484 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10485 ins_encode( strictfp_bias1(dst),
10486 Push_Reg_D(src),
10487 OpcP, RegOpc(dst),
10488 strictfp_bias2(dst) );
10489 ins_pipe( fpu_reg_reg );
10490 %}
10492 instruct mulD_reg_imm(regD dst, immD con) %{
10493 predicate( UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10494 match(Set dst (MulD dst con));
10495 ins_cost(200);
10496 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
10497 "DMULp $dst,ST" %}
10498 ins_encode %{
10499 __ fld_d($constantaddress($con));
10500 __ fmulp($dst$$reg);
10501 %}
10502 ins_pipe(fpu_reg_mem);
10503 %}
10506 instruct mulD_reg_mem(regD dst, memory src) %{
10507 predicate( UseSSE<=1 );
10508 match(Set dst (MulD dst (LoadD src)));
10509 ins_cost(200);
10510 format %{ "FLD_D $src\n\t"
10511 "DMULp $dst,ST" %}
10512 opcode(0xDE, 0x1, 0xDD); /* DE C8+i or DE /1*/ /* LoadD DD /0 */
10513 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10514 OpcP, RegOpc(dst) );
10515 ins_pipe( fpu_reg_mem );
10516 %}
10518 //
10519 // Cisc-alternate to reg-reg multiply
10520 instruct mulD_reg_mem_cisc(regD dst, regD src, memory mem) %{
10521 predicate( UseSSE<=1 );
10522 match(Set dst (MulD src (LoadD mem)));
10523 ins_cost(250);
10524 format %{ "FLD_D $mem\n\t"
10525 "DMUL ST,$src\n\t"
10526 "FSTP_D $dst" %}
10527 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadD D9 /0 */
10528 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem),
10529 OpcReg_F(src),
10530 Pop_Reg_D(dst) );
10531 ins_pipe( fpu_reg_reg_mem );
10532 %}
10535 // MACRO3 -- addD a mulD
10536 // This instruction is a '2-address' instruction in that the result goes
10537 // back to src2. This eliminates a move from the macro; possibly the
10538 // register allocator will have to add it back (and maybe not).
10539 instruct addD_mulD_reg(regD src2, regD src1, regD src0) %{
10540 predicate( UseSSE<=1 );
10541 match(Set src2 (AddD (MulD src0 src1) src2));
10542 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10543 "DMUL ST,$src1\n\t"
10544 "DADDp $src2,ST" %}
10545 ins_cost(250);
10546 opcode(0xDD); /* LoadD DD /0 */
10547 ins_encode( Push_Reg_F(src0),
10548 FMul_ST_reg(src1),
10549 FAddP_reg_ST(src2) );
10550 ins_pipe( fpu_reg_reg_reg );
10551 %}
10554 // MACRO3 -- subD a mulD
10555 instruct subD_mulD_reg(regD src2, regD src1, regD src0) %{
10556 predicate( UseSSE<=1 );
10557 match(Set src2 (SubD (MulD src0 src1) src2));
10558 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10559 "DMUL ST,$src1\n\t"
10560 "DSUBRp $src2,ST" %}
10561 ins_cost(250);
10562 ins_encode( Push_Reg_F(src0),
10563 FMul_ST_reg(src1),
10564 Opcode(0xDE), Opc_plus(0xE0,src2));
10565 ins_pipe( fpu_reg_reg_reg );
10566 %}
10569 instruct divD_reg(regD dst, regD src) %{
10570 predicate( UseSSE<=1 );
10571 match(Set dst (DivD dst src));
10573 format %{ "FLD $src\n\t"
10574 "FDIVp $dst,ST" %}
10575 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10576 ins_cost(150);
10577 ins_encode( Push_Reg_D(src),
10578 OpcP, RegOpc(dst) );
10579 ins_pipe( fpu_reg_reg );
10580 %}
10582 // Strict FP instruction biases argument before division then
10583 // biases result, to avoid double rounding of subnormals.
10584 //
10585 // scale dividend by multiplying dividend by 2^(-15360)
10586 // load divisor
10587 // divide scaled dividend by divisor
10588 // rescale quotient by 2^(15360)
10589 //
10590 instruct strictfp_divD_reg(regDPR1 dst, regnotDPR1 src) %{
10591 predicate (UseSSE<=1);
10592 match(Set dst (DivD dst src));
10593 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10594 ins_cost(01);
10596 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10597 "DMULp $dst,ST\n\t"
10598 "FLD $src\n\t"
10599 "FDIVp $dst,ST\n\t"
10600 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10601 "DMULp $dst,ST\n\t" %}
10602 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10603 ins_encode( strictfp_bias1(dst),
10604 Push_Reg_D(src),
10605 OpcP, RegOpc(dst),
10606 strictfp_bias2(dst) );
10607 ins_pipe( fpu_reg_reg );
10608 %}
10610 instruct divD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10611 predicate( UseSSE<=1 && !(Compile::current()->has_method() && Compile::current()->method()->is_strict()) );
10612 match(Set dst (RoundDouble (DivD src1 src2)));
10614 format %{ "FLD $src1\n\t"
10615 "FDIV ST,$src2\n\t"
10616 "FSTP_D $dst\t# D-round" %}
10617 opcode(0xD8, 0x6); /* D8 F0+i or D8 /6 */
10618 ins_encode( Push_Reg_D(src1),
10619 OpcP, RegOpc(src2), Pop_Mem_D(dst) );
10620 ins_pipe( fpu_mem_reg_reg );
10621 %}
10624 instruct modD_reg(regD dst, regD src, eAXRegI rax, eFlagsReg cr) %{
10625 predicate(UseSSE<=1);
10626 match(Set dst (ModD dst src));
10627 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
10629 format %{ "DMOD $dst,$src" %}
10630 ins_cost(250);
10631 ins_encode(Push_Reg_Mod_D(dst, src),
10632 emitModD(),
10633 Push_Result_Mod_D(src),
10634 Pop_Reg_D(dst));
10635 ins_pipe( pipe_slow );
10636 %}
10638 instruct modXD_reg(regXD dst, regXD src0, regXD src1, eAXRegI rax, eFlagsReg cr) %{
10639 predicate(UseSSE>=2);
10640 match(Set dst (ModD src0 src1));
10641 effect(KILL rax, KILL cr);
10643 format %{ "SUB ESP,8\t # DMOD\n"
10644 "\tMOVSD [ESP+0],$src1\n"
10645 "\tFLD_D [ESP+0]\n"
10646 "\tMOVSD [ESP+0],$src0\n"
10647 "\tFLD_D [ESP+0]\n"
10648 "loop:\tFPREM\n"
10649 "\tFWAIT\n"
10650 "\tFNSTSW AX\n"
10651 "\tSAHF\n"
10652 "\tJP loop\n"
10653 "\tFSTP_D [ESP+0]\n"
10654 "\tMOVSD $dst,[ESP+0]\n"
10655 "\tADD ESP,8\n"
10656 "\tFSTP ST0\t # Restore FPU Stack"
10657 %}
10658 ins_cost(250);
10659 ins_encode( Push_ModD_encoding(src0, src1), emitModD(), Push_ResultXD(dst), PopFPU);
10660 ins_pipe( pipe_slow );
10661 %}
10663 instruct sinD_reg(regDPR1 dst, regDPR1 src) %{
10664 predicate (UseSSE<=1);
10665 match(Set dst (SinD src));
10666 ins_cost(1800);
10667 format %{ "DSIN $dst" %}
10668 opcode(0xD9, 0xFE);
10669 ins_encode( OpcP, OpcS );
10670 ins_pipe( pipe_slow );
10671 %}
10673 instruct sinXD_reg(regXD dst, eFlagsReg cr) %{
10674 predicate (UseSSE>=2);
10675 match(Set dst (SinD dst));
10676 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10677 ins_cost(1800);
10678 format %{ "DSIN $dst" %}
10679 opcode(0xD9, 0xFE);
10680 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10681 ins_pipe( pipe_slow );
10682 %}
10684 instruct cosD_reg(regDPR1 dst, regDPR1 src) %{
10685 predicate (UseSSE<=1);
10686 match(Set dst (CosD src));
10687 ins_cost(1800);
10688 format %{ "DCOS $dst" %}
10689 opcode(0xD9, 0xFF);
10690 ins_encode( OpcP, OpcS );
10691 ins_pipe( pipe_slow );
10692 %}
10694 instruct cosXD_reg(regXD dst, eFlagsReg cr) %{
10695 predicate (UseSSE>=2);
10696 match(Set dst (CosD dst));
10697 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10698 ins_cost(1800);
10699 format %{ "DCOS $dst" %}
10700 opcode(0xD9, 0xFF);
10701 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10702 ins_pipe( pipe_slow );
10703 %}
10705 instruct tanD_reg(regDPR1 dst, regDPR1 src) %{
10706 predicate (UseSSE<=1);
10707 match(Set dst(TanD src));
10708 format %{ "DTAN $dst" %}
10709 ins_encode( Opcode(0xD9), Opcode(0xF2), // fptan
10710 Opcode(0xDD), Opcode(0xD8)); // fstp st
10711 ins_pipe( pipe_slow );
10712 %}
10714 instruct tanXD_reg(regXD dst, eFlagsReg cr) %{
10715 predicate (UseSSE>=2);
10716 match(Set dst(TanD dst));
10717 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10718 format %{ "DTAN $dst" %}
10719 ins_encode( Push_SrcXD(dst),
10720 Opcode(0xD9), Opcode(0xF2), // fptan
10721 Opcode(0xDD), Opcode(0xD8), // fstp st
10722 Push_ResultXD(dst) );
10723 ins_pipe( pipe_slow );
10724 %}
10726 instruct atanD_reg(regD dst, regD src) %{
10727 predicate (UseSSE<=1);
10728 match(Set dst(AtanD dst src));
10729 format %{ "DATA $dst,$src" %}
10730 opcode(0xD9, 0xF3);
10731 ins_encode( Push_Reg_D(src),
10732 OpcP, OpcS, RegOpc(dst) );
10733 ins_pipe( pipe_slow );
10734 %}
10736 instruct atanXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10737 predicate (UseSSE>=2);
10738 match(Set dst(AtanD dst src));
10739 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10740 format %{ "DATA $dst,$src" %}
10741 opcode(0xD9, 0xF3);
10742 ins_encode( Push_SrcXD(src),
10743 OpcP, OpcS, Push_ResultXD(dst) );
10744 ins_pipe( pipe_slow );
10745 %}
10747 instruct sqrtD_reg(regD dst, regD src) %{
10748 predicate (UseSSE<=1);
10749 match(Set dst (SqrtD src));
10750 format %{ "DSQRT $dst,$src" %}
10751 opcode(0xFA, 0xD9);
10752 ins_encode( Push_Reg_D(src),
10753 OpcS, OpcP, Pop_Reg_D(dst) );
10754 ins_pipe( pipe_slow );
10755 %}
10757 instruct powD_reg(regD X, regDPR1 Y, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10758 predicate (UseSSE<=1);
10759 match(Set Y (PowD X Y)); // Raise X to the Yth power
10760 effect(KILL rax, KILL rbx, KILL rcx);
10761 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10762 "FLD_D $X\n\t"
10763 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10765 "FDUP \t\t\t# Q Q\n\t"
10766 "FRNDINT\t\t\t# int(Q) Q\n\t"
10767 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10768 "FISTP dword [ESP]\n\t"
10769 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10770 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10771 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10772 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10773 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10774 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10775 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10776 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10777 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10778 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10779 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10780 "MOV [ESP+0],0\n\t"
10781 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10783 "ADD ESP,8"
10784 %}
10785 ins_encode( push_stack_temp_qword,
10786 Push_Reg_D(X),
10787 Opcode(0xD9), Opcode(0xF1), // fyl2x
10788 pow_exp_core_encoding,
10789 pop_stack_temp_qword);
10790 ins_pipe( pipe_slow );
10791 %}
10793 instruct powXD_reg(regXD dst, regXD src0, regXD src1, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx ) %{
10794 predicate (UseSSE>=2);
10795 match(Set dst (PowD src0 src1)); // Raise src0 to the src1'th power
10796 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx );
10797 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10798 "MOVSD [ESP],$src1\n\t"
10799 "FLD FPR1,$src1\n\t"
10800 "MOVSD [ESP],$src0\n\t"
10801 "FLD FPR1,$src0\n\t"
10802 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10804 "FDUP \t\t\t# Q Q\n\t"
10805 "FRNDINT\t\t\t# int(Q) Q\n\t"
10806 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10807 "FISTP dword [ESP]\n\t"
10808 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10809 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10810 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10811 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10812 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10813 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10814 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10815 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10816 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10817 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10818 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10819 "MOV [ESP+0],0\n\t"
10820 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10822 "FST_D [ESP]\n\t"
10823 "MOVSD $dst,[ESP]\n\t"
10824 "ADD ESP,8"
10825 %}
10826 ins_encode( push_stack_temp_qword,
10827 push_xmm_to_fpr1(src1),
10828 push_xmm_to_fpr1(src0),
10829 Opcode(0xD9), Opcode(0xF1), // fyl2x
10830 pow_exp_core_encoding,
10831 Push_ResultXD(dst) );
10832 ins_pipe( pipe_slow );
10833 %}
10836 instruct expD_reg(regDPR1 dpr1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10837 predicate (UseSSE<=1);
10838 match(Set dpr1 (ExpD dpr1));
10839 effect(KILL rax, KILL rbx, KILL rcx);
10840 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding"
10841 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10842 "FMULP \t\t\t# Q=X*log2(e)\n\t"
10844 "FDUP \t\t\t# Q Q\n\t"
10845 "FRNDINT\t\t\t# int(Q) Q\n\t"
10846 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10847 "FISTP dword [ESP]\n\t"
10848 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10849 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10850 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10851 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10852 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10853 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10854 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10855 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10856 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10857 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10858 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10859 "MOV [ESP+0],0\n\t"
10860 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10862 "ADD ESP,8"
10863 %}
10864 ins_encode( push_stack_temp_qword,
10865 Opcode(0xD9), Opcode(0xEA), // fldl2e
10866 Opcode(0xDE), Opcode(0xC9), // fmulp
10867 pow_exp_core_encoding,
10868 pop_stack_temp_qword);
10869 ins_pipe( pipe_slow );
10870 %}
10872 instruct expXD_reg(regXD dst, regXD src, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10873 predicate (UseSSE>=2);
10874 match(Set dst (ExpD src));
10875 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx);
10876 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding\n\t"
10877 "MOVSD [ESP],$src\n\t"
10878 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10879 "FMULP \t\t\t# Q=X*log2(e) X\n\t"
10881 "FDUP \t\t\t# Q Q\n\t"
10882 "FRNDINT\t\t\t# int(Q) Q\n\t"
10883 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10884 "FISTP dword [ESP]\n\t"
10885 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10886 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10887 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10888 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10889 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10890 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10891 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10892 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10893 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10894 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10895 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10896 "MOV [ESP+0],0\n\t"
10897 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10899 "FST_D [ESP]\n\t"
10900 "MOVSD $dst,[ESP]\n\t"
10901 "ADD ESP,8"
10902 %}
10903 ins_encode( Push_SrcXD(src),
10904 Opcode(0xD9), Opcode(0xEA), // fldl2e
10905 Opcode(0xDE), Opcode(0xC9), // fmulp
10906 pow_exp_core_encoding,
10907 Push_ResultXD(dst) );
10908 ins_pipe( pipe_slow );
10909 %}
10913 instruct log10D_reg(regDPR1 dst, regDPR1 src) %{
10914 predicate (UseSSE<=1);
10915 // The source Double operand on FPU stack
10916 match(Set dst (Log10D src));
10917 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10918 // fxch ; swap ST(0) with ST(1)
10919 // fyl2x ; compute log_10(2) * log_2(x)
10920 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10921 "FXCH \n\t"
10922 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10923 %}
10924 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10925 Opcode(0xD9), Opcode(0xC9), // fxch
10926 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10928 ins_pipe( pipe_slow );
10929 %}
10931 instruct log10XD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10932 predicate (UseSSE>=2);
10933 effect(KILL cr);
10934 match(Set dst (Log10D src));
10935 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10936 // fyl2x ; compute log_10(2) * log_2(x)
10937 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10938 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10939 %}
10940 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10941 Push_SrcXD(src),
10942 Opcode(0xD9), Opcode(0xF1), // fyl2x
10943 Push_ResultXD(dst));
10945 ins_pipe( pipe_slow );
10946 %}
10948 instruct logD_reg(regDPR1 dst, regDPR1 src) %{
10949 predicate (UseSSE<=1);
10950 // The source Double operand on FPU stack
10951 match(Set dst (LogD src));
10952 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10953 // fxch ; swap ST(0) with ST(1)
10954 // fyl2x ; compute log_e(2) * log_2(x)
10955 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10956 "FXCH \n\t"
10957 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10958 %}
10959 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10960 Opcode(0xD9), Opcode(0xC9), // fxch
10961 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10963 ins_pipe( pipe_slow );
10964 %}
10966 instruct logXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10967 predicate (UseSSE>=2);
10968 effect(KILL cr);
10969 // The source and result Double operands in XMM registers
10970 match(Set dst (LogD src));
10971 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10972 // fyl2x ; compute log_e(2) * log_2(x)
10973 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10974 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10975 %}
10976 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10977 Push_SrcXD(src),
10978 Opcode(0xD9), Opcode(0xF1), // fyl2x
10979 Push_ResultXD(dst));
10980 ins_pipe( pipe_slow );
10981 %}
10983 //-------------Float Instructions-------------------------------
10984 // Float Math
10986 // Code for float compare:
10987 // fcompp();
10988 // fwait(); fnstsw_ax();
10989 // sahf();
10990 // movl(dst, unordered_result);
10991 // jcc(Assembler::parity, exit);
10992 // movl(dst, less_result);
10993 // jcc(Assembler::below, exit);
10994 // movl(dst, equal_result);
10995 // jcc(Assembler::equal, exit);
10996 // movl(dst, greater_result);
10997 // exit:
10999 // P6 version of float compare, sets condition codes in EFLAGS
11000 instruct cmpF_cc_P6(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
11001 predicate(VM_Version::supports_cmov() && UseSSE == 0);
11002 match(Set cr (CmpF src1 src2));
11003 effect(KILL rax);
11004 ins_cost(150);
11005 format %{ "FLD $src1\n\t"
11006 "FUCOMIP ST,$src2 // P6 instruction\n\t"
11007 "JNP exit\n\t"
11008 "MOV ah,1 // saw a NaN, set CF (treat as LT)\n\t"
11009 "SAHF\n"
11010 "exit:\tNOP // avoid branch to branch" %}
11011 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
11012 ins_encode( Push_Reg_D(src1),
11013 OpcP, RegOpc(src2),
11014 cmpF_P6_fixup );
11015 ins_pipe( pipe_slow );
11016 %}
11018 instruct cmpF_cc_P6CF(eFlagsRegUCF cr, regF src1, regF src2) %{
11019 predicate(VM_Version::supports_cmov() && UseSSE == 0);
11020 match(Set cr (CmpF src1 src2));
11021 ins_cost(100);
11022 format %{ "FLD $src1\n\t"
11023 "FUCOMIP ST,$src2 // P6 instruction" %}
11024 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
11025 ins_encode( Push_Reg_D(src1),
11026 OpcP, RegOpc(src2));
11027 ins_pipe( pipe_slow );
11028 %}
11031 // Compare & branch
11032 instruct cmpF_cc(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
11033 predicate(UseSSE == 0);
11034 match(Set cr (CmpF src1 src2));
11035 effect(KILL rax);
11036 ins_cost(200);
11037 format %{ "FLD $src1\n\t"
11038 "FCOMp $src2\n\t"
11039 "FNSTSW AX\n\t"
11040 "TEST AX,0x400\n\t"
11041 "JZ,s flags\n\t"
11042 "MOV AH,1\t# unordered treat as LT\n"
11043 "flags:\tSAHF" %}
11044 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
11045 ins_encode( Push_Reg_D(src1),
11046 OpcP, RegOpc(src2),
11047 fpu_flags);
11048 ins_pipe( pipe_slow );
11049 %}
11051 // Compare vs zero into -1,0,1
11052 instruct cmpF_0(eRegI dst, regF src1, immF0 zero, eAXRegI rax, eFlagsReg cr) %{
11053 predicate(UseSSE == 0);
11054 match(Set dst (CmpF3 src1 zero));
11055 effect(KILL cr, KILL rax);
11056 ins_cost(280);
11057 format %{ "FTSTF $dst,$src1" %}
11058 opcode(0xE4, 0xD9);
11059 ins_encode( Push_Reg_D(src1),
11060 OpcS, OpcP, PopFPU,
11061 CmpF_Result(dst));
11062 ins_pipe( pipe_slow );
11063 %}
11065 // Compare into -1,0,1
11066 instruct cmpF_reg(eRegI dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
11067 predicate(UseSSE == 0);
11068 match(Set dst (CmpF3 src1 src2));
11069 effect(KILL cr, KILL rax);
11070 ins_cost(300);
11071 format %{ "FCMPF $dst,$src1,$src2" %}
11072 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
11073 ins_encode( Push_Reg_D(src1),
11074 OpcP, RegOpc(src2),
11075 CmpF_Result(dst));
11076 ins_pipe( pipe_slow );
11077 %}
11079 // float compare and set condition codes in EFLAGS by XMM regs
11080 instruct cmpX_cc(eFlagsRegU cr, regX dst, regX src, eAXRegI rax) %{
11081 predicate(UseSSE>=1);
11082 match(Set cr (CmpF dst src));
11083 effect(KILL rax);
11084 ins_cost(145);
11085 format %{ "COMISS $dst,$src\n"
11086 "\tJNP exit\n"
11087 "\tMOV ah,1 // saw a NaN, set CF\n"
11088 "\tSAHF\n"
11089 "exit:\tNOP // avoid branch to branch" %}
11090 opcode(0x0F, 0x2F);
11091 ins_encode(OpcP, OpcS, RegReg(dst, src), cmpF_P6_fixup);
11092 ins_pipe( pipe_slow );
11093 %}
11095 instruct cmpX_ccCF(eFlagsRegUCF cr, regX dst, regX src) %{
11096 predicate(UseSSE>=1);
11097 match(Set cr (CmpF dst src));
11098 ins_cost(100);
11099 format %{ "COMISS $dst,$src" %}
11100 opcode(0x0F, 0x2F);
11101 ins_encode(OpcP, OpcS, RegReg(dst, src));
11102 ins_pipe( pipe_slow );
11103 %}
11105 // float compare and set condition codes in EFLAGS by XMM regs
11106 instruct cmpX_ccmem(eFlagsRegU cr, regX dst, memory src, eAXRegI rax) %{
11107 predicate(UseSSE>=1);
11108 match(Set cr (CmpF dst (LoadF src)));
11109 effect(KILL rax);
11110 ins_cost(165);
11111 format %{ "COMISS $dst,$src\n"
11112 "\tJNP exit\n"
11113 "\tMOV ah,1 // saw a NaN, set CF\n"
11114 "\tSAHF\n"
11115 "exit:\tNOP // avoid branch to branch" %}
11116 opcode(0x0F, 0x2F);
11117 ins_encode(OpcP, OpcS, RegMem(dst, src), cmpF_P6_fixup);
11118 ins_pipe( pipe_slow );
11119 %}
11121 instruct cmpX_ccmemCF(eFlagsRegUCF cr, regX dst, memory src) %{
11122 predicate(UseSSE>=1);
11123 match(Set cr (CmpF dst (LoadF src)));
11124 ins_cost(100);
11125 format %{ "COMISS $dst,$src" %}
11126 opcode(0x0F, 0x2F);
11127 ins_encode(OpcP, OpcS, RegMem(dst, src));
11128 ins_pipe( pipe_slow );
11129 %}
11131 // Compare into -1,0,1 in XMM
11132 instruct cmpX_reg(eRegI dst, regX src1, regX src2, eFlagsReg cr) %{
11133 predicate(UseSSE>=1);
11134 match(Set dst (CmpF3 src1 src2));
11135 effect(KILL cr);
11136 ins_cost(255);
11137 format %{ "XOR $dst,$dst\n"
11138 "\tCOMISS $src1,$src2\n"
11139 "\tJP,s nan\n"
11140 "\tJEQ,s exit\n"
11141 "\tJA,s inc\n"
11142 "nan:\tDEC $dst\n"
11143 "\tJMP,s exit\n"
11144 "inc:\tINC $dst\n"
11145 "exit:"
11146 %}
11147 opcode(0x0F, 0x2F);
11148 ins_encode(Xor_Reg(dst), OpcP, OpcS, RegReg(src1, src2), CmpX_Result(dst));
11149 ins_pipe( pipe_slow );
11150 %}
11152 // Compare into -1,0,1 in XMM and memory
11153 instruct cmpX_regmem(eRegI dst, regX src1, memory mem, eFlagsReg cr) %{
11154 predicate(UseSSE>=1);
11155 match(Set dst (CmpF3 src1 (LoadF mem)));
11156 effect(KILL cr);
11157 ins_cost(275);
11158 format %{ "COMISS $src1,$mem\n"
11159 "\tMOV $dst,0\t\t# do not blow flags\n"
11160 "\tJP,s nan\n"
11161 "\tJEQ,s exit\n"
11162 "\tJA,s inc\n"
11163 "nan:\tDEC $dst\n"
11164 "\tJMP,s exit\n"
11165 "inc:\tINC $dst\n"
11166 "exit:"
11167 %}
11168 opcode(0x0F, 0x2F);
11169 ins_encode(OpcP, OpcS, RegMem(src1, mem), LdImmI(dst,0x0), CmpX_Result(dst));
11170 ins_pipe( pipe_slow );
11171 %}
11173 // Spill to obtain 24-bit precision
11174 instruct subF24_reg(stackSlotF dst, regF src1, regF src2) %{
11175 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11176 match(Set dst (SubF src1 src2));
11178 format %{ "FSUB $dst,$src1 - $src2" %}
11179 opcode(0xD8, 0x4); /* D8 E0+i or D8 /4 mod==0x3 ;; result in TOS */
11180 ins_encode( Push_Reg_F(src1),
11181 OpcReg_F(src2),
11182 Pop_Mem_F(dst) );
11183 ins_pipe( fpu_mem_reg_reg );
11184 %}
11185 //
11186 // This instruction does not round to 24-bits
11187 instruct subF_reg(regF dst, regF src) %{
11188 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11189 match(Set dst (SubF dst src));
11191 format %{ "FSUB $dst,$src" %}
11192 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
11193 ins_encode( Push_Reg_F(src),
11194 OpcP, RegOpc(dst) );
11195 ins_pipe( fpu_reg_reg );
11196 %}
11198 // Spill to obtain 24-bit precision
11199 instruct addF24_reg(stackSlotF dst, regF src1, regF src2) %{
11200 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11201 match(Set dst (AddF src1 src2));
11203 format %{ "FADD $dst,$src1,$src2" %}
11204 opcode(0xD8, 0x0); /* D8 C0+i */
11205 ins_encode( Push_Reg_F(src2),
11206 OpcReg_F(src1),
11207 Pop_Mem_F(dst) );
11208 ins_pipe( fpu_mem_reg_reg );
11209 %}
11210 //
11211 // This instruction does not round to 24-bits
11212 instruct addF_reg(regF dst, regF src) %{
11213 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11214 match(Set dst (AddF dst src));
11216 format %{ "FLD $src\n\t"
11217 "FADDp $dst,ST" %}
11218 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
11219 ins_encode( Push_Reg_F(src),
11220 OpcP, RegOpc(dst) );
11221 ins_pipe( fpu_reg_reg );
11222 %}
11224 // Add two single precision floating point values in xmm
11225 instruct addX_reg(regX dst, regX src) %{
11226 predicate(UseSSE>=1);
11227 match(Set dst (AddF dst src));
11228 format %{ "ADDSS $dst,$src" %}
11229 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
11230 ins_pipe( pipe_slow );
11231 %}
11233 instruct addX_imm(regX dst, immXF con) %{
11234 predicate(UseSSE>=1);
11235 match(Set dst (AddF dst con));
11236 format %{ "ADDSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
11237 ins_encode %{
11238 __ addss($dst$$XMMRegister, $constantaddress($con));
11239 %}
11240 ins_pipe(pipe_slow);
11241 %}
11243 instruct addX_mem(regX dst, memory mem) %{
11244 predicate(UseSSE>=1);
11245 match(Set dst (AddF dst (LoadF mem)));
11246 format %{ "ADDSS $dst,$mem" %}
11247 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegMem(dst, mem));
11248 ins_pipe( pipe_slow );
11249 %}
11251 // Subtract two single precision floating point values in xmm
11252 instruct subX_reg(regX dst, regX src) %{
11253 predicate(UseSSE>=1);
11254 match(Set dst (SubF dst src));
11255 format %{ "SUBSS $dst,$src" %}
11256 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
11257 ins_pipe( pipe_slow );
11258 %}
11260 instruct subX_imm(regX dst, immXF con) %{
11261 predicate(UseSSE>=1);
11262 match(Set dst (SubF dst con));
11263 format %{ "SUBSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
11264 ins_encode %{
11265 __ subss($dst$$XMMRegister, $constantaddress($con));
11266 %}
11267 ins_pipe(pipe_slow);
11268 %}
11270 instruct subX_mem(regX dst, memory mem) %{
11271 predicate(UseSSE>=1);
11272 match(Set dst (SubF dst (LoadF mem)));
11273 format %{ "SUBSS $dst,$mem" %}
11274 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
11275 ins_pipe( pipe_slow );
11276 %}
11278 // Multiply two single precision floating point values in xmm
11279 instruct mulX_reg(regX dst, regX src) %{
11280 predicate(UseSSE>=1);
11281 match(Set dst (MulF dst src));
11282 format %{ "MULSS $dst,$src" %}
11283 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
11284 ins_pipe( pipe_slow );
11285 %}
11287 instruct mulX_imm(regX dst, immXF con) %{
11288 predicate(UseSSE>=1);
11289 match(Set dst (MulF dst con));
11290 format %{ "MULSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
11291 ins_encode %{
11292 __ mulss($dst$$XMMRegister, $constantaddress($con));
11293 %}
11294 ins_pipe(pipe_slow);
11295 %}
11297 instruct mulX_mem(regX dst, memory mem) %{
11298 predicate(UseSSE>=1);
11299 match(Set dst (MulF dst (LoadF mem)));
11300 format %{ "MULSS $dst,$mem" %}
11301 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
11302 ins_pipe( pipe_slow );
11303 %}
11305 // Divide two single precision floating point values in xmm
11306 instruct divX_reg(regX dst, regX src) %{
11307 predicate(UseSSE>=1);
11308 match(Set dst (DivF dst src));
11309 format %{ "DIVSS $dst,$src" %}
11310 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
11311 ins_pipe( pipe_slow );
11312 %}
11314 instruct divX_imm(regX dst, immXF con) %{
11315 predicate(UseSSE>=1);
11316 match(Set dst (DivF dst con));
11317 format %{ "DIVSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
11318 ins_encode %{
11319 __ divss($dst$$XMMRegister, $constantaddress($con));
11320 %}
11321 ins_pipe(pipe_slow);
11322 %}
11324 instruct divX_mem(regX dst, memory mem) %{
11325 predicate(UseSSE>=1);
11326 match(Set dst (DivF dst (LoadF mem)));
11327 format %{ "DIVSS $dst,$mem" %}
11328 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
11329 ins_pipe( pipe_slow );
11330 %}
11332 // Get the square root of a single precision floating point values in xmm
11333 instruct sqrtX_reg(regX dst, regX src) %{
11334 predicate(UseSSE>=1);
11335 match(Set dst (ConvD2F (SqrtD (ConvF2D src))));
11336 format %{ "SQRTSS $dst,$src" %}
11337 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11338 ins_pipe( pipe_slow );
11339 %}
11341 instruct sqrtX_mem(regX dst, memory mem) %{
11342 predicate(UseSSE>=1);
11343 match(Set dst (ConvD2F (SqrtD (ConvF2D (LoadF mem)))));
11344 format %{ "SQRTSS $dst,$mem" %}
11345 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11346 ins_pipe( pipe_slow );
11347 %}
11349 // Get the square root of a double precision floating point values in xmm
11350 instruct sqrtXD_reg(regXD dst, regXD src) %{
11351 predicate(UseSSE>=2);
11352 match(Set dst (SqrtD src));
11353 format %{ "SQRTSD $dst,$src" %}
11354 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11355 ins_pipe( pipe_slow );
11356 %}
11358 instruct sqrtXD_mem(regXD dst, memory mem) %{
11359 predicate(UseSSE>=2);
11360 match(Set dst (SqrtD (LoadD mem)));
11361 format %{ "SQRTSD $dst,$mem" %}
11362 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11363 ins_pipe( pipe_slow );
11364 %}
11366 instruct absF_reg(regFPR1 dst, regFPR1 src) %{
11367 predicate(UseSSE==0);
11368 match(Set dst (AbsF src));
11369 ins_cost(100);
11370 format %{ "FABS" %}
11371 opcode(0xE1, 0xD9);
11372 ins_encode( OpcS, OpcP );
11373 ins_pipe( fpu_reg_reg );
11374 %}
11376 instruct absX_reg(regX dst ) %{
11377 predicate(UseSSE>=1);
11378 match(Set dst (AbsF dst));
11379 format %{ "ANDPS $dst,[0x7FFFFFFF]\t# ABS F by sign masking" %}
11380 ins_encode( AbsXF_encoding(dst));
11381 ins_pipe( pipe_slow );
11382 %}
11384 instruct negF_reg(regFPR1 dst, regFPR1 src) %{
11385 predicate(UseSSE==0);
11386 match(Set dst (NegF src));
11387 ins_cost(100);
11388 format %{ "FCHS" %}
11389 opcode(0xE0, 0xD9);
11390 ins_encode( OpcS, OpcP );
11391 ins_pipe( fpu_reg_reg );
11392 %}
11394 instruct negX_reg( regX dst ) %{
11395 predicate(UseSSE>=1);
11396 match(Set dst (NegF dst));
11397 format %{ "XORPS $dst,[0x80000000]\t# CHS F by sign flipping" %}
11398 ins_encode( NegXF_encoding(dst));
11399 ins_pipe( pipe_slow );
11400 %}
11402 // Cisc-alternate to addF_reg
11403 // Spill to obtain 24-bit precision
11404 instruct addF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11405 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11406 match(Set dst (AddF src1 (LoadF src2)));
11408 format %{ "FLD $src2\n\t"
11409 "FADD ST,$src1\n\t"
11410 "FSTP_S $dst" %}
11411 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11412 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11413 OpcReg_F(src1),
11414 Pop_Mem_F(dst) );
11415 ins_pipe( fpu_mem_reg_mem );
11416 %}
11417 //
11418 // Cisc-alternate to addF_reg
11419 // This instruction does not round to 24-bits
11420 instruct addF_reg_mem(regF dst, memory src) %{
11421 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11422 match(Set dst (AddF dst (LoadF src)));
11424 format %{ "FADD $dst,$src" %}
11425 opcode(0xDE, 0x0, 0xD9); /* DE C0+i or DE /0*/ /* LoadF D9 /0 */
11426 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
11427 OpcP, RegOpc(dst) );
11428 ins_pipe( fpu_reg_mem );
11429 %}
11431 // // Following two instructions for _222_mpegaudio
11432 // Spill to obtain 24-bit precision
11433 instruct addF24_mem_reg(stackSlotF dst, regF src2, memory src1 ) %{
11434 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11435 match(Set dst (AddF src1 src2));
11437 format %{ "FADD $dst,$src1,$src2" %}
11438 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11439 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src1),
11440 OpcReg_F(src2),
11441 Pop_Mem_F(dst) );
11442 ins_pipe( fpu_mem_reg_mem );
11443 %}
11445 // Cisc-spill variant
11446 // Spill to obtain 24-bit precision
11447 instruct addF24_mem_cisc(stackSlotF dst, memory src1, memory src2) %{
11448 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11449 match(Set dst (AddF src1 (LoadF src2)));
11451 format %{ "FADD $dst,$src1,$src2 cisc" %}
11452 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11453 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11454 set_instruction_start,
11455 OpcP, RMopc_Mem(secondary,src1),
11456 Pop_Mem_F(dst) );
11457 ins_pipe( fpu_mem_mem_mem );
11458 %}
11460 // Spill to obtain 24-bit precision
11461 instruct addF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11462 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11463 match(Set dst (AddF src1 src2));
11465 format %{ "FADD $dst,$src1,$src2" %}
11466 opcode(0xD8, 0x0, 0xD9); /* D8 /0 */ /* LoadF D9 /0 */
11467 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11468 set_instruction_start,
11469 OpcP, RMopc_Mem(secondary,src1),
11470 Pop_Mem_F(dst) );
11471 ins_pipe( fpu_mem_mem_mem );
11472 %}
11475 // Spill to obtain 24-bit precision
11476 instruct addF24_reg_imm(stackSlotF dst, regF src, immF con) %{
11477 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11478 match(Set dst (AddF src con));
11479 format %{ "FLD $src\n\t"
11480 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
11481 "FSTP_S $dst" %}
11482 ins_encode %{
11483 __ fld_s($src$$reg - 1); // FLD ST(i-1)
11484 __ fadd_s($constantaddress($con));
11485 __ fstp_s(Address(rsp, $dst$$disp));
11486 %}
11487 ins_pipe(fpu_mem_reg_con);
11488 %}
11489 //
11490 // This instruction does not round to 24-bits
11491 instruct addF_reg_imm(regF dst, regF src, immF con) %{
11492 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11493 match(Set dst (AddF src con));
11494 format %{ "FLD $src\n\t"
11495 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
11496 "FSTP $dst" %}
11497 ins_encode %{
11498 __ fld_s($src$$reg - 1); // FLD ST(i-1)
11499 __ fadd_s($constantaddress($con));
11500 __ fstp_d($dst$$reg);
11501 %}
11502 ins_pipe(fpu_reg_reg_con);
11503 %}
11505 // Spill to obtain 24-bit precision
11506 instruct mulF24_reg(stackSlotF dst, regF src1, regF src2) %{
11507 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11508 match(Set dst (MulF src1 src2));
11510 format %{ "FLD $src1\n\t"
11511 "FMUL $src2\n\t"
11512 "FSTP_S $dst" %}
11513 opcode(0xD8, 0x1); /* D8 C8+i or D8 /1 ;; result in TOS */
11514 ins_encode( Push_Reg_F(src1),
11515 OpcReg_F(src2),
11516 Pop_Mem_F(dst) );
11517 ins_pipe( fpu_mem_reg_reg );
11518 %}
11519 //
11520 // This instruction does not round to 24-bits
11521 instruct mulF_reg(regF dst, regF src1, regF src2) %{
11522 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11523 match(Set dst (MulF src1 src2));
11525 format %{ "FLD $src1\n\t"
11526 "FMUL $src2\n\t"
11527 "FSTP_S $dst" %}
11528 opcode(0xD8, 0x1); /* D8 C8+i */
11529 ins_encode( Push_Reg_F(src2),
11530 OpcReg_F(src1),
11531 Pop_Reg_F(dst) );
11532 ins_pipe( fpu_reg_reg_reg );
11533 %}
11536 // Spill to obtain 24-bit precision
11537 // Cisc-alternate to reg-reg multiply
11538 instruct mulF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11539 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11540 match(Set dst (MulF src1 (LoadF src2)));
11542 format %{ "FLD_S $src2\n\t"
11543 "FMUL $src1\n\t"
11544 "FSTP_S $dst" %}
11545 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or DE /1*/ /* LoadF D9 /0 */
11546 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11547 OpcReg_F(src1),
11548 Pop_Mem_F(dst) );
11549 ins_pipe( fpu_mem_reg_mem );
11550 %}
11551 //
11552 // This instruction does not round to 24-bits
11553 // Cisc-alternate to reg-reg multiply
11554 instruct mulF_reg_mem(regF dst, regF src1, memory src2) %{
11555 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11556 match(Set dst (MulF src1 (LoadF src2)));
11558 format %{ "FMUL $dst,$src1,$src2" %}
11559 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadF D9 /0 */
11560 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11561 OpcReg_F(src1),
11562 Pop_Reg_F(dst) );
11563 ins_pipe( fpu_reg_reg_mem );
11564 %}
11566 // Spill to obtain 24-bit precision
11567 instruct mulF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11568 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11569 match(Set dst (MulF src1 src2));
11571 format %{ "FMUL $dst,$src1,$src2" %}
11572 opcode(0xD8, 0x1, 0xD9); /* D8 /1 */ /* LoadF D9 /0 */
11573 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11574 set_instruction_start,
11575 OpcP, RMopc_Mem(secondary,src1),
11576 Pop_Mem_F(dst) );
11577 ins_pipe( fpu_mem_mem_mem );
11578 %}
11580 // Spill to obtain 24-bit precision
11581 instruct mulF24_reg_imm(stackSlotF dst, regF src, immF con) %{
11582 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11583 match(Set dst (MulF src con));
11585 format %{ "FLD $src\n\t"
11586 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
11587 "FSTP_S $dst" %}
11588 ins_encode %{
11589 __ fld_s($src$$reg - 1); // FLD ST(i-1)
11590 __ fmul_s($constantaddress($con));
11591 __ fstp_s(Address(rsp, $dst$$disp));
11592 %}
11593 ins_pipe(fpu_mem_reg_con);
11594 %}
11595 //
11596 // This instruction does not round to 24-bits
11597 instruct mulF_reg_imm(regF dst, regF src, immF con) %{
11598 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11599 match(Set dst (MulF src con));
11601 format %{ "FLD $src\n\t"
11602 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
11603 "FSTP $dst" %}
11604 ins_encode %{
11605 __ fld_s($src$$reg - 1); // FLD ST(i-1)
11606 __ fmul_s($constantaddress($con));
11607 __ fstp_d($dst$$reg);
11608 %}
11609 ins_pipe(fpu_reg_reg_con);
11610 %}
11613 //
11614 // MACRO1 -- subsume unshared load into mulF
11615 // This instruction does not round to 24-bits
11616 instruct mulF_reg_load1(regF dst, regF src, memory mem1 ) %{
11617 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11618 match(Set dst (MulF (LoadF mem1) src));
11620 format %{ "FLD $mem1 ===MACRO1===\n\t"
11621 "FMUL ST,$src\n\t"
11622 "FSTP $dst" %}
11623 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or D8 /1 */ /* LoadF D9 /0 */
11624 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem1),
11625 OpcReg_F(src),
11626 Pop_Reg_F(dst) );
11627 ins_pipe( fpu_reg_reg_mem );
11628 %}
11629 //
11630 // MACRO2 -- addF a mulF which subsumed an unshared load
11631 // This instruction does not round to 24-bits
11632 instruct addF_mulF_reg_load1(regF dst, memory mem1, regF src1, regF src2) %{
11633 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11634 match(Set dst (AddF (MulF (LoadF mem1) src1) src2));
11635 ins_cost(95);
11637 format %{ "FLD $mem1 ===MACRO2===\n\t"
11638 "FMUL ST,$src1 subsume mulF left load\n\t"
11639 "FADD ST,$src2\n\t"
11640 "FSTP $dst" %}
11641 opcode(0xD9); /* LoadF D9 /0 */
11642 ins_encode( OpcP, RMopc_Mem(0x00,mem1),
11643 FMul_ST_reg(src1),
11644 FAdd_ST_reg(src2),
11645 Pop_Reg_F(dst) );
11646 ins_pipe( fpu_reg_mem_reg_reg );
11647 %}
11649 // MACRO3 -- addF a mulF
11650 // This instruction does not round to 24-bits. It is a '2-address'
11651 // instruction in that the result goes back to src2. This eliminates
11652 // a move from the macro; possibly the register allocator will have
11653 // to add it back (and maybe not).
11654 instruct addF_mulF_reg(regF src2, regF src1, regF src0) %{
11655 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11656 match(Set src2 (AddF (MulF src0 src1) src2));
11658 format %{ "FLD $src0 ===MACRO3===\n\t"
11659 "FMUL ST,$src1\n\t"
11660 "FADDP $src2,ST" %}
11661 opcode(0xD9); /* LoadF D9 /0 */
11662 ins_encode( Push_Reg_F(src0),
11663 FMul_ST_reg(src1),
11664 FAddP_reg_ST(src2) );
11665 ins_pipe( fpu_reg_reg_reg );
11666 %}
11668 // MACRO4 -- divF subF
11669 // This instruction does not round to 24-bits
11670 instruct subF_divF_reg(regF dst, regF src1, regF src2, regF src3) %{
11671 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11672 match(Set dst (DivF (SubF src2 src1) src3));
11674 format %{ "FLD $src2 ===MACRO4===\n\t"
11675 "FSUB ST,$src1\n\t"
11676 "FDIV ST,$src3\n\t"
11677 "FSTP $dst" %}
11678 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11679 ins_encode( Push_Reg_F(src2),
11680 subF_divF_encode(src1,src3),
11681 Pop_Reg_F(dst) );
11682 ins_pipe( fpu_reg_reg_reg_reg );
11683 %}
11685 // Spill to obtain 24-bit precision
11686 instruct divF24_reg(stackSlotF dst, regF src1, regF src2) %{
11687 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11688 match(Set dst (DivF src1 src2));
11690 format %{ "FDIV $dst,$src1,$src2" %}
11691 opcode(0xD8, 0x6); /* D8 F0+i or DE /6*/
11692 ins_encode( Push_Reg_F(src1),
11693 OpcReg_F(src2),
11694 Pop_Mem_F(dst) );
11695 ins_pipe( fpu_mem_reg_reg );
11696 %}
11697 //
11698 // This instruction does not round to 24-bits
11699 instruct divF_reg(regF dst, regF src) %{
11700 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11701 match(Set dst (DivF dst src));
11703 format %{ "FDIV $dst,$src" %}
11704 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11705 ins_encode( Push_Reg_F(src),
11706 OpcP, RegOpc(dst) );
11707 ins_pipe( fpu_reg_reg );
11708 %}
11711 // Spill to obtain 24-bit precision
11712 instruct modF24_reg(stackSlotF dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
11713 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11714 match(Set dst (ModF src1 src2));
11715 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11717 format %{ "FMOD $dst,$src1,$src2" %}
11718 ins_encode( Push_Reg_Mod_D(src1, src2),
11719 emitModD(),
11720 Push_Result_Mod_D(src2),
11721 Pop_Mem_F(dst));
11722 ins_pipe( pipe_slow );
11723 %}
11724 //
11725 // This instruction does not round to 24-bits
11726 instruct modF_reg(regF dst, regF src, eAXRegI rax, eFlagsReg cr) %{
11727 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11728 match(Set dst (ModF dst src));
11729 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11731 format %{ "FMOD $dst,$src" %}
11732 ins_encode(Push_Reg_Mod_D(dst, src),
11733 emitModD(),
11734 Push_Result_Mod_D(src),
11735 Pop_Reg_F(dst));
11736 ins_pipe( pipe_slow );
11737 %}
11739 instruct modX_reg(regX dst, regX src0, regX src1, eAXRegI rax, eFlagsReg cr) %{
11740 predicate(UseSSE>=1);
11741 match(Set dst (ModF src0 src1));
11742 effect(KILL rax, KILL cr);
11743 format %{ "SUB ESP,4\t # FMOD\n"
11744 "\tMOVSS [ESP+0],$src1\n"
11745 "\tFLD_S [ESP+0]\n"
11746 "\tMOVSS [ESP+0],$src0\n"
11747 "\tFLD_S [ESP+0]\n"
11748 "loop:\tFPREM\n"
11749 "\tFWAIT\n"
11750 "\tFNSTSW AX\n"
11751 "\tSAHF\n"
11752 "\tJP loop\n"
11753 "\tFSTP_S [ESP+0]\n"
11754 "\tMOVSS $dst,[ESP+0]\n"
11755 "\tADD ESP,4\n"
11756 "\tFSTP ST0\t # Restore FPU Stack"
11757 %}
11758 ins_cost(250);
11759 ins_encode( Push_ModX_encoding(src0, src1), emitModD(), Push_ResultX(dst,0x4), PopFPU);
11760 ins_pipe( pipe_slow );
11761 %}
11764 //----------Arithmetic Conversion Instructions---------------------------------
11765 // The conversions operations are all Alpha sorted. Please keep it that way!
11767 instruct roundFloat_mem_reg(stackSlotF dst, regF src) %{
11768 predicate(UseSSE==0);
11769 match(Set dst (RoundFloat src));
11770 ins_cost(125);
11771 format %{ "FST_S $dst,$src\t# F-round" %}
11772 ins_encode( Pop_Mem_Reg_F(dst, src) );
11773 ins_pipe( fpu_mem_reg );
11774 %}
11776 instruct roundDouble_mem_reg(stackSlotD dst, regD src) %{
11777 predicate(UseSSE<=1);
11778 match(Set dst (RoundDouble src));
11779 ins_cost(125);
11780 format %{ "FST_D $dst,$src\t# D-round" %}
11781 ins_encode( Pop_Mem_Reg_D(dst, src) );
11782 ins_pipe( fpu_mem_reg );
11783 %}
11785 // Force rounding to 24-bit precision and 6-bit exponent
11786 instruct convD2F_reg(stackSlotF dst, regD src) %{
11787 predicate(UseSSE==0);
11788 match(Set dst (ConvD2F src));
11789 format %{ "FST_S $dst,$src\t# F-round" %}
11790 expand %{
11791 roundFloat_mem_reg(dst,src);
11792 %}
11793 %}
11795 // Force rounding to 24-bit precision and 6-bit exponent
11796 instruct convD2X_reg(regX dst, regD src, eFlagsReg cr) %{
11797 predicate(UseSSE==1);
11798 match(Set dst (ConvD2F src));
11799 effect( KILL cr );
11800 format %{ "SUB ESP,4\n\t"
11801 "FST_S [ESP],$src\t# F-round\n\t"
11802 "MOVSS $dst,[ESP]\n\t"
11803 "ADD ESP,4" %}
11804 ins_encode( D2X_encoding(dst, src) );
11805 ins_pipe( pipe_slow );
11806 %}
11808 // Force rounding double precision to single precision
11809 instruct convXD2X_reg(regX dst, regXD src) %{
11810 predicate(UseSSE>=2);
11811 match(Set dst (ConvD2F src));
11812 format %{ "CVTSD2SS $dst,$src\t# F-round" %}
11813 opcode(0xF2, 0x0F, 0x5A);
11814 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11815 ins_pipe( pipe_slow );
11816 %}
11818 instruct convF2D_reg_reg(regD dst, regF src) %{
11819 predicate(UseSSE==0);
11820 match(Set dst (ConvF2D src));
11821 format %{ "FST_S $dst,$src\t# D-round" %}
11822 ins_encode( Pop_Reg_Reg_D(dst, src));
11823 ins_pipe( fpu_reg_reg );
11824 %}
11826 instruct convF2D_reg(stackSlotD dst, regF src) %{
11827 predicate(UseSSE==1);
11828 match(Set dst (ConvF2D src));
11829 format %{ "FST_D $dst,$src\t# D-round" %}
11830 expand %{
11831 roundDouble_mem_reg(dst,src);
11832 %}
11833 %}
11835 instruct convX2D_reg(regD dst, regX src, eFlagsReg cr) %{
11836 predicate(UseSSE==1);
11837 match(Set dst (ConvF2D src));
11838 effect( KILL cr );
11839 format %{ "SUB ESP,4\n\t"
11840 "MOVSS [ESP] $src\n\t"
11841 "FLD_S [ESP]\n\t"
11842 "ADD ESP,4\n\t"
11843 "FSTP $dst\t# D-round" %}
11844 ins_encode( X2D_encoding(dst, src), Pop_Reg_D(dst));
11845 ins_pipe( pipe_slow );
11846 %}
11848 instruct convX2XD_reg(regXD dst, regX src) %{
11849 predicate(UseSSE>=2);
11850 match(Set dst (ConvF2D src));
11851 format %{ "CVTSS2SD $dst,$src\t# D-round" %}
11852 opcode(0xF3, 0x0F, 0x5A);
11853 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11854 ins_pipe( pipe_slow );
11855 %}
11857 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11858 instruct convD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regD src, eFlagsReg cr ) %{
11859 predicate(UseSSE<=1);
11860 match(Set dst (ConvD2I src));
11861 effect( KILL tmp, KILL cr );
11862 format %{ "FLD $src\t# Convert double to int \n\t"
11863 "FLDCW trunc mode\n\t"
11864 "SUB ESP,4\n\t"
11865 "FISTp [ESP + #0]\n\t"
11866 "FLDCW std/24-bit mode\n\t"
11867 "POP EAX\n\t"
11868 "CMP EAX,0x80000000\n\t"
11869 "JNE,s fast\n\t"
11870 "FLD_D $src\n\t"
11871 "CALL d2i_wrapper\n"
11872 "fast:" %}
11873 ins_encode( Push_Reg_D(src), D2I_encoding(src) );
11874 ins_pipe( pipe_slow );
11875 %}
11877 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11878 instruct convXD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regXD src, eFlagsReg cr ) %{
11879 predicate(UseSSE>=2);
11880 match(Set dst (ConvD2I src));
11881 effect( KILL tmp, KILL cr );
11882 format %{ "CVTTSD2SI $dst, $src\n\t"
11883 "CMP $dst,0x80000000\n\t"
11884 "JNE,s fast\n\t"
11885 "SUB ESP, 8\n\t"
11886 "MOVSD [ESP], $src\n\t"
11887 "FLD_D [ESP]\n\t"
11888 "ADD ESP, 8\n\t"
11889 "CALL d2i_wrapper\n"
11890 "fast:" %}
11891 opcode(0x1); // double-precision conversion
11892 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11893 ins_pipe( pipe_slow );
11894 %}
11896 instruct convD2L_reg_reg( eADXRegL dst, regD src, eFlagsReg cr ) %{
11897 predicate(UseSSE<=1);
11898 match(Set dst (ConvD2L src));
11899 effect( KILL cr );
11900 format %{ "FLD $src\t# Convert double to long\n\t"
11901 "FLDCW trunc mode\n\t"
11902 "SUB ESP,8\n\t"
11903 "FISTp [ESP + #0]\n\t"
11904 "FLDCW std/24-bit mode\n\t"
11905 "POP EAX\n\t"
11906 "POP EDX\n\t"
11907 "CMP EDX,0x80000000\n\t"
11908 "JNE,s fast\n\t"
11909 "TEST EAX,EAX\n\t"
11910 "JNE,s fast\n\t"
11911 "FLD $src\n\t"
11912 "CALL d2l_wrapper\n"
11913 "fast:" %}
11914 ins_encode( Push_Reg_D(src), D2L_encoding(src) );
11915 ins_pipe( pipe_slow );
11916 %}
11918 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11919 instruct convXD2L_reg_reg( eADXRegL dst, regXD src, eFlagsReg cr ) %{
11920 predicate (UseSSE>=2);
11921 match(Set dst (ConvD2L src));
11922 effect( KILL cr );
11923 format %{ "SUB ESP,8\t# Convert double to long\n\t"
11924 "MOVSD [ESP],$src\n\t"
11925 "FLD_D [ESP]\n\t"
11926 "FLDCW trunc mode\n\t"
11927 "FISTp [ESP + #0]\n\t"
11928 "FLDCW std/24-bit mode\n\t"
11929 "POP EAX\n\t"
11930 "POP EDX\n\t"
11931 "CMP EDX,0x80000000\n\t"
11932 "JNE,s fast\n\t"
11933 "TEST EAX,EAX\n\t"
11934 "JNE,s fast\n\t"
11935 "SUB ESP,8\n\t"
11936 "MOVSD [ESP],$src\n\t"
11937 "FLD_D [ESP]\n\t"
11938 "CALL d2l_wrapper\n"
11939 "fast:" %}
11940 ins_encode( XD2L_encoding(src) );
11941 ins_pipe( pipe_slow );
11942 %}
11944 // Convert a double to an int. Java semantics require we do complex
11945 // manglations in the corner cases. So we set the rounding mode to
11946 // 'zero', store the darned double down as an int, and reset the
11947 // rounding mode to 'nearest'. The hardware stores a flag value down
11948 // if we would overflow or converted a NAN; we check for this and
11949 // and go the slow path if needed.
11950 instruct convF2I_reg_reg(eAXRegI dst, eDXRegI tmp, regF src, eFlagsReg cr ) %{
11951 predicate(UseSSE==0);
11952 match(Set dst (ConvF2I src));
11953 effect( KILL tmp, KILL cr );
11954 format %{ "FLD $src\t# Convert float to int \n\t"
11955 "FLDCW trunc mode\n\t"
11956 "SUB ESP,4\n\t"
11957 "FISTp [ESP + #0]\n\t"
11958 "FLDCW std/24-bit mode\n\t"
11959 "POP EAX\n\t"
11960 "CMP EAX,0x80000000\n\t"
11961 "JNE,s fast\n\t"
11962 "FLD $src\n\t"
11963 "CALL d2i_wrapper\n"
11964 "fast:" %}
11965 // D2I_encoding works for F2I
11966 ins_encode( Push_Reg_F(src), D2I_encoding(src) );
11967 ins_pipe( pipe_slow );
11968 %}
11970 // Convert a float in xmm to an int reg.
11971 instruct convX2I_reg(eAXRegI dst, eDXRegI tmp, regX src, eFlagsReg cr ) %{
11972 predicate(UseSSE>=1);
11973 match(Set dst (ConvF2I src));
11974 effect( KILL tmp, KILL cr );
11975 format %{ "CVTTSS2SI $dst, $src\n\t"
11976 "CMP $dst,0x80000000\n\t"
11977 "JNE,s fast\n\t"
11978 "SUB ESP, 4\n\t"
11979 "MOVSS [ESP], $src\n\t"
11980 "FLD [ESP]\n\t"
11981 "ADD ESP, 4\n\t"
11982 "CALL d2i_wrapper\n"
11983 "fast:" %}
11984 opcode(0x0); // single-precision conversion
11985 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11986 ins_pipe( pipe_slow );
11987 %}
11989 instruct convF2L_reg_reg( eADXRegL dst, regF src, eFlagsReg cr ) %{
11990 predicate(UseSSE==0);
11991 match(Set dst (ConvF2L src));
11992 effect( KILL cr );
11993 format %{ "FLD $src\t# Convert float to long\n\t"
11994 "FLDCW trunc mode\n\t"
11995 "SUB ESP,8\n\t"
11996 "FISTp [ESP + #0]\n\t"
11997 "FLDCW std/24-bit mode\n\t"
11998 "POP EAX\n\t"
11999 "POP EDX\n\t"
12000 "CMP EDX,0x80000000\n\t"
12001 "JNE,s fast\n\t"
12002 "TEST EAX,EAX\n\t"
12003 "JNE,s fast\n\t"
12004 "FLD $src\n\t"
12005 "CALL d2l_wrapper\n"
12006 "fast:" %}
12007 // D2L_encoding works for F2L
12008 ins_encode( Push_Reg_F(src), D2L_encoding(src) );
12009 ins_pipe( pipe_slow );
12010 %}
12012 // XMM lacks a float/double->long conversion, so use the old FPU stack.
12013 instruct convX2L_reg_reg( eADXRegL dst, regX src, eFlagsReg cr ) %{
12014 predicate (UseSSE>=1);
12015 match(Set dst (ConvF2L src));
12016 effect( KILL cr );
12017 format %{ "SUB ESP,8\t# Convert float to long\n\t"
12018 "MOVSS [ESP],$src\n\t"
12019 "FLD_S [ESP]\n\t"
12020 "FLDCW trunc mode\n\t"
12021 "FISTp [ESP + #0]\n\t"
12022 "FLDCW std/24-bit mode\n\t"
12023 "POP EAX\n\t"
12024 "POP EDX\n\t"
12025 "CMP EDX,0x80000000\n\t"
12026 "JNE,s fast\n\t"
12027 "TEST EAX,EAX\n\t"
12028 "JNE,s fast\n\t"
12029 "SUB ESP,4\t# Convert float to long\n\t"
12030 "MOVSS [ESP],$src\n\t"
12031 "FLD_S [ESP]\n\t"
12032 "ADD ESP,4\n\t"
12033 "CALL d2l_wrapper\n"
12034 "fast:" %}
12035 ins_encode( X2L_encoding(src) );
12036 ins_pipe( pipe_slow );
12037 %}
12039 instruct convI2D_reg(regD dst, stackSlotI src) %{
12040 predicate( UseSSE<=1 );
12041 match(Set dst (ConvI2D src));
12042 format %{ "FILD $src\n\t"
12043 "FSTP $dst" %}
12044 opcode(0xDB, 0x0); /* DB /0 */
12045 ins_encode(Push_Mem_I(src), Pop_Reg_D(dst));
12046 ins_pipe( fpu_reg_mem );
12047 %}
12049 instruct convI2XD_reg(regXD dst, eRegI src) %{
12050 predicate( UseSSE>=2 && !UseXmmI2D );
12051 match(Set dst (ConvI2D src));
12052 format %{ "CVTSI2SD $dst,$src" %}
12053 opcode(0xF2, 0x0F, 0x2A);
12054 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
12055 ins_pipe( pipe_slow );
12056 %}
12058 instruct convI2XD_mem(regXD dst, memory mem) %{
12059 predicate( UseSSE>=2 );
12060 match(Set dst (ConvI2D (LoadI mem)));
12061 format %{ "CVTSI2SD $dst,$mem" %}
12062 opcode(0xF2, 0x0F, 0x2A);
12063 ins_encode( OpcP, OpcS, Opcode(tertiary), RegMem(dst, mem));
12064 ins_pipe( pipe_slow );
12065 %}
12067 instruct convXI2XD_reg(regXD dst, eRegI src)
12068 %{
12069 predicate( UseSSE>=2 && UseXmmI2D );
12070 match(Set dst (ConvI2D src));
12072 format %{ "MOVD $dst,$src\n\t"
12073 "CVTDQ2PD $dst,$dst\t# i2d" %}
12074 ins_encode %{
12075 __ movdl($dst$$XMMRegister, $src$$Register);
12076 __ cvtdq2pd($dst$$XMMRegister, $dst$$XMMRegister);
12077 %}
12078 ins_pipe(pipe_slow); // XXX
12079 %}
12081 instruct convI2D_mem(regD dst, memory mem) %{
12082 predicate( UseSSE<=1 && !Compile::current()->select_24_bit_instr());
12083 match(Set dst (ConvI2D (LoadI mem)));
12084 format %{ "FILD $mem\n\t"
12085 "FSTP $dst" %}
12086 opcode(0xDB); /* DB /0 */
12087 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12088 Pop_Reg_D(dst));
12089 ins_pipe( fpu_reg_mem );
12090 %}
12092 // Convert a byte to a float; no rounding step needed.
12093 instruct conv24I2F_reg(regF dst, stackSlotI src) %{
12094 predicate( UseSSE==0 && n->in(1)->Opcode() == Op_AndI && n->in(1)->in(2)->is_Con() && n->in(1)->in(2)->get_int() == 255 );
12095 match(Set dst (ConvI2F src));
12096 format %{ "FILD $src\n\t"
12097 "FSTP $dst" %}
12099 opcode(0xDB, 0x0); /* DB /0 */
12100 ins_encode(Push_Mem_I(src), Pop_Reg_F(dst));
12101 ins_pipe( fpu_reg_mem );
12102 %}
12104 // In 24-bit mode, force exponent rounding by storing back out
12105 instruct convI2F_SSF(stackSlotF dst, stackSlotI src) %{
12106 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
12107 match(Set dst (ConvI2F src));
12108 ins_cost(200);
12109 format %{ "FILD $src\n\t"
12110 "FSTP_S $dst" %}
12111 opcode(0xDB, 0x0); /* DB /0 */
12112 ins_encode( Push_Mem_I(src),
12113 Pop_Mem_F(dst));
12114 ins_pipe( fpu_mem_mem );
12115 %}
12117 // In 24-bit mode, force exponent rounding by storing back out
12118 instruct convI2F_SSF_mem(stackSlotF dst, memory mem) %{
12119 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
12120 match(Set dst (ConvI2F (LoadI mem)));
12121 ins_cost(200);
12122 format %{ "FILD $mem\n\t"
12123 "FSTP_S $dst" %}
12124 opcode(0xDB); /* DB /0 */
12125 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12126 Pop_Mem_F(dst));
12127 ins_pipe( fpu_mem_mem );
12128 %}
12130 // This instruction does not round to 24-bits
12131 instruct convI2F_reg(regF dst, stackSlotI src) %{
12132 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
12133 match(Set dst (ConvI2F src));
12134 format %{ "FILD $src\n\t"
12135 "FSTP $dst" %}
12136 opcode(0xDB, 0x0); /* DB /0 */
12137 ins_encode( Push_Mem_I(src),
12138 Pop_Reg_F(dst));
12139 ins_pipe( fpu_reg_mem );
12140 %}
12142 // This instruction does not round to 24-bits
12143 instruct convI2F_mem(regF dst, memory mem) %{
12144 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
12145 match(Set dst (ConvI2F (LoadI mem)));
12146 format %{ "FILD $mem\n\t"
12147 "FSTP $dst" %}
12148 opcode(0xDB); /* DB /0 */
12149 ins_encode( OpcP, RMopc_Mem(0x00,mem),
12150 Pop_Reg_F(dst));
12151 ins_pipe( fpu_reg_mem );
12152 %}
12154 // Convert an int to a float in xmm; no rounding step needed.
12155 instruct convI2X_reg(regX dst, eRegI src) %{
12156 predicate( UseSSE==1 || UseSSE>=2 && !UseXmmI2F );
12157 match(Set dst (ConvI2F src));
12158 format %{ "CVTSI2SS $dst, $src" %}
12160 opcode(0xF3, 0x0F, 0x2A); /* F3 0F 2A /r */
12161 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
12162 ins_pipe( pipe_slow );
12163 %}
12165 instruct convXI2X_reg(regX dst, eRegI src)
12166 %{
12167 predicate( UseSSE>=2 && UseXmmI2F );
12168 match(Set dst (ConvI2F src));
12170 format %{ "MOVD $dst,$src\n\t"
12171 "CVTDQ2PS $dst,$dst\t# i2f" %}
12172 ins_encode %{
12173 __ movdl($dst$$XMMRegister, $src$$Register);
12174 __ cvtdq2ps($dst$$XMMRegister, $dst$$XMMRegister);
12175 %}
12176 ins_pipe(pipe_slow); // XXX
12177 %}
12179 instruct convI2L_reg( eRegL dst, eRegI src, eFlagsReg cr) %{
12180 match(Set dst (ConvI2L src));
12181 effect(KILL cr);
12182 ins_cost(375);
12183 format %{ "MOV $dst.lo,$src\n\t"
12184 "MOV $dst.hi,$src\n\t"
12185 "SAR $dst.hi,31" %}
12186 ins_encode(convert_int_long(dst,src));
12187 ins_pipe( ialu_reg_reg_long );
12188 %}
12190 // Zero-extend convert int to long
12191 instruct convI2L_reg_zex(eRegL dst, eRegI src, immL_32bits mask, eFlagsReg flags ) %{
12192 match(Set dst (AndL (ConvI2L src) mask) );
12193 effect( KILL flags );
12194 ins_cost(250);
12195 format %{ "MOV $dst.lo,$src\n\t"
12196 "XOR $dst.hi,$dst.hi" %}
12197 opcode(0x33); // XOR
12198 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
12199 ins_pipe( ialu_reg_reg_long );
12200 %}
12202 // Zero-extend long
12203 instruct zerox_long(eRegL dst, eRegL src, immL_32bits mask, eFlagsReg flags ) %{
12204 match(Set dst (AndL src mask) );
12205 effect( KILL flags );
12206 ins_cost(250);
12207 format %{ "MOV $dst.lo,$src.lo\n\t"
12208 "XOR $dst.hi,$dst.hi\n\t" %}
12209 opcode(0x33); // XOR
12210 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
12211 ins_pipe( ialu_reg_reg_long );
12212 %}
12214 instruct convL2D_reg( stackSlotD dst, eRegL src, eFlagsReg cr) %{
12215 predicate (UseSSE<=1);
12216 match(Set dst (ConvL2D src));
12217 effect( KILL cr );
12218 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12219 "PUSH $src.lo\n\t"
12220 "FILD ST,[ESP + #0]\n\t"
12221 "ADD ESP,8\n\t"
12222 "FSTP_D $dst\t# D-round" %}
12223 opcode(0xDF, 0x5); /* DF /5 */
12224 ins_encode(convert_long_double(src), Pop_Mem_D(dst));
12225 ins_pipe( pipe_slow );
12226 %}
12228 instruct convL2XD_reg( regXD dst, eRegL src, eFlagsReg cr) %{
12229 predicate (UseSSE>=2);
12230 match(Set dst (ConvL2D src));
12231 effect( KILL cr );
12232 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12233 "PUSH $src.lo\n\t"
12234 "FILD_D [ESP]\n\t"
12235 "FSTP_D [ESP]\n\t"
12236 "MOVSD $dst,[ESP]\n\t"
12237 "ADD ESP,8" %}
12238 opcode(0xDF, 0x5); /* DF /5 */
12239 ins_encode(convert_long_double2(src), Push_ResultXD(dst));
12240 ins_pipe( pipe_slow );
12241 %}
12243 instruct convL2X_reg( regX dst, eRegL src, eFlagsReg cr) %{
12244 predicate (UseSSE>=1);
12245 match(Set dst (ConvL2F src));
12246 effect( KILL cr );
12247 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12248 "PUSH $src.lo\n\t"
12249 "FILD_D [ESP]\n\t"
12250 "FSTP_S [ESP]\n\t"
12251 "MOVSS $dst,[ESP]\n\t"
12252 "ADD ESP,8" %}
12253 opcode(0xDF, 0x5); /* DF /5 */
12254 ins_encode(convert_long_double2(src), Push_ResultX(dst,0x8));
12255 ins_pipe( pipe_slow );
12256 %}
12258 instruct convL2F_reg( stackSlotF dst, eRegL src, eFlagsReg cr) %{
12259 match(Set dst (ConvL2F src));
12260 effect( KILL cr );
12261 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12262 "PUSH $src.lo\n\t"
12263 "FILD ST,[ESP + #0]\n\t"
12264 "ADD ESP,8\n\t"
12265 "FSTP_S $dst\t# F-round" %}
12266 opcode(0xDF, 0x5); /* DF /5 */
12267 ins_encode(convert_long_double(src), Pop_Mem_F(dst));
12268 ins_pipe( pipe_slow );
12269 %}
12271 instruct convL2I_reg( eRegI dst, eRegL src ) %{
12272 match(Set dst (ConvL2I src));
12273 effect( DEF dst, USE src );
12274 format %{ "MOV $dst,$src.lo" %}
12275 ins_encode(enc_CopyL_Lo(dst,src));
12276 ins_pipe( ialu_reg_reg );
12277 %}
12280 instruct MoveF2I_stack_reg(eRegI dst, stackSlotF src) %{
12281 match(Set dst (MoveF2I src));
12282 effect( DEF dst, USE src );
12283 ins_cost(100);
12284 format %{ "MOV $dst,$src\t# MoveF2I_stack_reg" %}
12285 opcode(0x8B);
12286 ins_encode( OpcP, RegMem(dst,src));
12287 ins_pipe( ialu_reg_mem );
12288 %}
12290 instruct MoveF2I_reg_stack(stackSlotI dst, regF src) %{
12291 predicate(UseSSE==0);
12292 match(Set dst (MoveF2I src));
12293 effect( DEF dst, USE src );
12295 ins_cost(125);
12296 format %{ "FST_S $dst,$src\t# MoveF2I_reg_stack" %}
12297 ins_encode( Pop_Mem_Reg_F(dst, src) );
12298 ins_pipe( fpu_mem_reg );
12299 %}
12301 instruct MoveF2I_reg_stack_sse(stackSlotI dst, regX src) %{
12302 predicate(UseSSE>=1);
12303 match(Set dst (MoveF2I src));
12304 effect( DEF dst, USE src );
12306 ins_cost(95);
12307 format %{ "MOVSS $dst,$src\t# MoveF2I_reg_stack_sse" %}
12308 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, dst));
12309 ins_pipe( pipe_slow );
12310 %}
12312 instruct MoveF2I_reg_reg_sse(eRegI dst, regX src) %{
12313 predicate(UseSSE>=2);
12314 match(Set dst (MoveF2I src));
12315 effect( DEF dst, USE src );
12316 ins_cost(85);
12317 format %{ "MOVD $dst,$src\t# MoveF2I_reg_reg_sse" %}
12318 ins_encode( MovX2I_reg(dst, src));
12319 ins_pipe( pipe_slow );
12320 %}
12322 instruct MoveI2F_reg_stack(stackSlotF dst, eRegI src) %{
12323 match(Set dst (MoveI2F src));
12324 effect( DEF dst, USE src );
12326 ins_cost(100);
12327 format %{ "MOV $dst,$src\t# MoveI2F_reg_stack" %}
12328 opcode(0x89);
12329 ins_encode( OpcPRegSS( dst, src ) );
12330 ins_pipe( ialu_mem_reg );
12331 %}
12334 instruct MoveI2F_stack_reg(regF dst, stackSlotI src) %{
12335 predicate(UseSSE==0);
12336 match(Set dst (MoveI2F src));
12337 effect(DEF dst, USE src);
12339 ins_cost(125);
12340 format %{ "FLD_S $src\n\t"
12341 "FSTP $dst\t# MoveI2F_stack_reg" %}
12342 opcode(0xD9); /* D9 /0, FLD m32real */
12343 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12344 Pop_Reg_F(dst) );
12345 ins_pipe( fpu_reg_mem );
12346 %}
12348 instruct MoveI2F_stack_reg_sse(regX dst, stackSlotI src) %{
12349 predicate(UseSSE>=1);
12350 match(Set dst (MoveI2F src));
12351 effect( DEF dst, USE src );
12353 ins_cost(95);
12354 format %{ "MOVSS $dst,$src\t# MoveI2F_stack_reg_sse" %}
12355 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12356 ins_pipe( pipe_slow );
12357 %}
12359 instruct MoveI2F_reg_reg_sse(regX dst, eRegI src) %{
12360 predicate(UseSSE>=2);
12361 match(Set dst (MoveI2F src));
12362 effect( DEF dst, USE src );
12364 ins_cost(85);
12365 format %{ "MOVD $dst,$src\t# MoveI2F_reg_reg_sse" %}
12366 ins_encode( MovI2X_reg(dst, src) );
12367 ins_pipe( pipe_slow );
12368 %}
12370 instruct MoveD2L_stack_reg(eRegL dst, stackSlotD src) %{
12371 match(Set dst (MoveD2L src));
12372 effect(DEF dst, USE src);
12374 ins_cost(250);
12375 format %{ "MOV $dst.lo,$src\n\t"
12376 "MOV $dst.hi,$src+4\t# MoveD2L_stack_reg" %}
12377 opcode(0x8B, 0x8B);
12378 ins_encode( OpcP, RegMem(dst,src), OpcS, RegMem_Hi(dst,src));
12379 ins_pipe( ialu_mem_long_reg );
12380 %}
12382 instruct MoveD2L_reg_stack(stackSlotL dst, regD src) %{
12383 predicate(UseSSE<=1);
12384 match(Set dst (MoveD2L src));
12385 effect(DEF dst, USE src);
12387 ins_cost(125);
12388 format %{ "FST_D $dst,$src\t# MoveD2L_reg_stack" %}
12389 ins_encode( Pop_Mem_Reg_D(dst, src) );
12390 ins_pipe( fpu_mem_reg );
12391 %}
12393 instruct MoveD2L_reg_stack_sse(stackSlotL dst, regXD src) %{
12394 predicate(UseSSE>=2);
12395 match(Set dst (MoveD2L src));
12396 effect(DEF dst, USE src);
12397 ins_cost(95);
12399 format %{ "MOVSD $dst,$src\t# MoveD2L_reg_stack_sse" %}
12400 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src,dst));
12401 ins_pipe( pipe_slow );
12402 %}
12404 instruct MoveD2L_reg_reg_sse(eRegL dst, regXD src, regXD tmp) %{
12405 predicate(UseSSE>=2);
12406 match(Set dst (MoveD2L src));
12407 effect(DEF dst, USE src, TEMP tmp);
12408 ins_cost(85);
12409 format %{ "MOVD $dst.lo,$src\n\t"
12410 "PSHUFLW $tmp,$src,0x4E\n\t"
12411 "MOVD $dst.hi,$tmp\t# MoveD2L_reg_reg_sse" %}
12412 ins_encode( MovXD2L_reg(dst, src, tmp) );
12413 ins_pipe( pipe_slow );
12414 %}
12416 instruct MoveL2D_reg_stack(stackSlotD dst, eRegL src) %{
12417 match(Set dst (MoveL2D src));
12418 effect(DEF dst, USE src);
12420 ins_cost(200);
12421 format %{ "MOV $dst,$src.lo\n\t"
12422 "MOV $dst+4,$src.hi\t# MoveL2D_reg_stack" %}
12423 opcode(0x89, 0x89);
12424 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
12425 ins_pipe( ialu_mem_long_reg );
12426 %}
12429 instruct MoveL2D_stack_reg(regD dst, stackSlotL src) %{
12430 predicate(UseSSE<=1);
12431 match(Set dst (MoveL2D src));
12432 effect(DEF dst, USE src);
12433 ins_cost(125);
12435 format %{ "FLD_D $src\n\t"
12436 "FSTP $dst\t# MoveL2D_stack_reg" %}
12437 opcode(0xDD); /* DD /0, FLD m64real */
12438 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12439 Pop_Reg_D(dst) );
12440 ins_pipe( fpu_reg_mem );
12441 %}
12444 instruct MoveL2D_stack_reg_sse(regXD dst, stackSlotL src) %{
12445 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
12446 match(Set dst (MoveL2D src));
12447 effect(DEF dst, USE src);
12449 ins_cost(95);
12450 format %{ "MOVSD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12451 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12452 ins_pipe( pipe_slow );
12453 %}
12455 instruct MoveL2D_stack_reg_sse_partial(regXD dst, stackSlotL src) %{
12456 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
12457 match(Set dst (MoveL2D src));
12458 effect(DEF dst, USE src);
12460 ins_cost(95);
12461 format %{ "MOVLPD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12462 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,src));
12463 ins_pipe( pipe_slow );
12464 %}
12466 instruct MoveL2D_reg_reg_sse(regXD dst, eRegL src, regXD tmp) %{
12467 predicate(UseSSE>=2);
12468 match(Set dst (MoveL2D src));
12469 effect(TEMP dst, USE src, TEMP tmp);
12470 ins_cost(85);
12471 format %{ "MOVD $dst,$src.lo\n\t"
12472 "MOVD $tmp,$src.hi\n\t"
12473 "PUNPCKLDQ $dst,$tmp\t# MoveL2D_reg_reg_sse" %}
12474 ins_encode( MovL2XD_reg(dst, src, tmp) );
12475 ins_pipe( pipe_slow );
12476 %}
12478 // Replicate scalar to packed byte (1 byte) values in xmm
12479 instruct Repl8B_reg(regXD dst, regXD src) %{
12480 predicate(UseSSE>=2);
12481 match(Set dst (Replicate8B src));
12482 format %{ "MOVDQA $dst,$src\n\t"
12483 "PUNPCKLBW $dst,$dst\n\t"
12484 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12485 ins_encode( pshufd_8x8(dst, src));
12486 ins_pipe( pipe_slow );
12487 %}
12489 // Replicate scalar to packed byte (1 byte) values in xmm
12490 instruct Repl8B_eRegI(regXD dst, eRegI src) %{
12491 predicate(UseSSE>=2);
12492 match(Set dst (Replicate8B src));
12493 format %{ "MOVD $dst,$src\n\t"
12494 "PUNPCKLBW $dst,$dst\n\t"
12495 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12496 ins_encode( mov_i2x(dst, src), pshufd_8x8(dst, dst));
12497 ins_pipe( pipe_slow );
12498 %}
12500 // Replicate scalar zero to packed byte (1 byte) values in xmm
12501 instruct Repl8B_immI0(regXD dst, immI0 zero) %{
12502 predicate(UseSSE>=2);
12503 match(Set dst (Replicate8B zero));
12504 format %{ "PXOR $dst,$dst\t! replicate8B" %}
12505 ins_encode( pxor(dst, dst));
12506 ins_pipe( fpu_reg_reg );
12507 %}
12509 // Replicate scalar to packed shore (2 byte) values in xmm
12510 instruct Repl4S_reg(regXD dst, regXD src) %{
12511 predicate(UseSSE>=2);
12512 match(Set dst (Replicate4S src));
12513 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4S" %}
12514 ins_encode( pshufd_4x16(dst, src));
12515 ins_pipe( fpu_reg_reg );
12516 %}
12518 // Replicate scalar to packed shore (2 byte) values in xmm
12519 instruct Repl4S_eRegI(regXD dst, eRegI src) %{
12520 predicate(UseSSE>=2);
12521 match(Set dst (Replicate4S src));
12522 format %{ "MOVD $dst,$src\n\t"
12523 "PSHUFLW $dst,$dst,0x00\t! replicate4S" %}
12524 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12525 ins_pipe( fpu_reg_reg );
12526 %}
12528 // Replicate scalar zero to packed short (2 byte) values in xmm
12529 instruct Repl4S_immI0(regXD dst, immI0 zero) %{
12530 predicate(UseSSE>=2);
12531 match(Set dst (Replicate4S zero));
12532 format %{ "PXOR $dst,$dst\t! replicate4S" %}
12533 ins_encode( pxor(dst, dst));
12534 ins_pipe( fpu_reg_reg );
12535 %}
12537 // Replicate scalar to packed char (2 byte) values in xmm
12538 instruct Repl4C_reg(regXD dst, regXD src) %{
12539 predicate(UseSSE>=2);
12540 match(Set dst (Replicate4C src));
12541 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4C" %}
12542 ins_encode( pshufd_4x16(dst, src));
12543 ins_pipe( fpu_reg_reg );
12544 %}
12546 // Replicate scalar to packed char (2 byte) values in xmm
12547 instruct Repl4C_eRegI(regXD dst, eRegI src) %{
12548 predicate(UseSSE>=2);
12549 match(Set dst (Replicate4C src));
12550 format %{ "MOVD $dst,$src\n\t"
12551 "PSHUFLW $dst,$dst,0x00\t! replicate4C" %}
12552 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12553 ins_pipe( fpu_reg_reg );
12554 %}
12556 // Replicate scalar zero to packed char (2 byte) values in xmm
12557 instruct Repl4C_immI0(regXD dst, immI0 zero) %{
12558 predicate(UseSSE>=2);
12559 match(Set dst (Replicate4C zero));
12560 format %{ "PXOR $dst,$dst\t! replicate4C" %}
12561 ins_encode( pxor(dst, dst));
12562 ins_pipe( fpu_reg_reg );
12563 %}
12565 // Replicate scalar to packed integer (4 byte) values in xmm
12566 instruct Repl2I_reg(regXD dst, regXD src) %{
12567 predicate(UseSSE>=2);
12568 match(Set dst (Replicate2I src));
12569 format %{ "PSHUFD $dst,$src,0x00\t! replicate2I" %}
12570 ins_encode( pshufd(dst, src, 0x00));
12571 ins_pipe( fpu_reg_reg );
12572 %}
12574 // Replicate scalar to packed integer (4 byte) values in xmm
12575 instruct Repl2I_eRegI(regXD dst, eRegI src) %{
12576 predicate(UseSSE>=2);
12577 match(Set dst (Replicate2I src));
12578 format %{ "MOVD $dst,$src\n\t"
12579 "PSHUFD $dst,$dst,0x00\t! replicate2I" %}
12580 ins_encode( mov_i2x(dst, src), pshufd(dst, dst, 0x00));
12581 ins_pipe( fpu_reg_reg );
12582 %}
12584 // Replicate scalar zero to packed integer (2 byte) values in xmm
12585 instruct Repl2I_immI0(regXD dst, immI0 zero) %{
12586 predicate(UseSSE>=2);
12587 match(Set dst (Replicate2I zero));
12588 format %{ "PXOR $dst,$dst\t! replicate2I" %}
12589 ins_encode( pxor(dst, dst));
12590 ins_pipe( fpu_reg_reg );
12591 %}
12593 // Replicate scalar to packed single precision floating point values in xmm
12594 instruct Repl2F_reg(regXD dst, regXD src) %{
12595 predicate(UseSSE>=2);
12596 match(Set dst (Replicate2F src));
12597 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12598 ins_encode( pshufd(dst, src, 0xe0));
12599 ins_pipe( fpu_reg_reg );
12600 %}
12602 // Replicate scalar to packed single precision floating point values in xmm
12603 instruct Repl2F_regX(regXD dst, regX src) %{
12604 predicate(UseSSE>=2);
12605 match(Set dst (Replicate2F src));
12606 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12607 ins_encode( pshufd(dst, src, 0xe0));
12608 ins_pipe( fpu_reg_reg );
12609 %}
12611 // Replicate scalar to packed single precision floating point values in xmm
12612 instruct Repl2F_immXF0(regXD dst, immXF0 zero) %{
12613 predicate(UseSSE>=2);
12614 match(Set dst (Replicate2F zero));
12615 format %{ "PXOR $dst,$dst\t! replicate2F" %}
12616 ins_encode( pxor(dst, dst));
12617 ins_pipe( fpu_reg_reg );
12618 %}
12620 // =======================================================================
12621 // fast clearing of an array
12622 instruct rep_stos(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
12623 match(Set dummy (ClearArray cnt base));
12624 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
12625 format %{ "SHL ECX,1\t# Convert doublewords to words\n\t"
12626 "XOR EAX,EAX\n\t"
12627 "REP STOS\t# store EAX into [EDI++] while ECX--" %}
12628 opcode(0,0x4);
12629 ins_encode( Opcode(0xD1), RegOpc(ECX),
12630 OpcRegReg(0x33,EAX,EAX),
12631 Opcode(0xF3), Opcode(0xAB) );
12632 ins_pipe( pipe_slow );
12633 %}
12635 instruct string_compare(eDIRegP str1, eCXRegI cnt1, eSIRegP str2, eDXRegI cnt2,
12636 eAXRegI result, regXD tmp1, eFlagsReg cr) %{
12637 match(Set result (StrComp (Binary str1 cnt1) (Binary str2 cnt2)));
12638 effect(TEMP tmp1, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL cr);
12640 format %{ "String Compare $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp1" %}
12641 ins_encode %{
12642 __ string_compare($str1$$Register, $str2$$Register,
12643 $cnt1$$Register, $cnt2$$Register, $result$$Register,
12644 $tmp1$$XMMRegister);
12645 %}
12646 ins_pipe( pipe_slow );
12647 %}
12649 // fast string equals
12650 instruct string_equals(eDIRegP str1, eSIRegP str2, eCXRegI cnt, eAXRegI result,
12651 regXD tmp1, regXD tmp2, eBXRegI tmp3, eFlagsReg cr) %{
12652 match(Set result (StrEquals (Binary str1 str2) cnt));
12653 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt, KILL tmp3, KILL cr);
12655 format %{ "String Equals $str1,$str2,$cnt -> $result // KILL $tmp1, $tmp2, $tmp3" %}
12656 ins_encode %{
12657 __ char_arrays_equals(false, $str1$$Register, $str2$$Register,
12658 $cnt$$Register, $result$$Register, $tmp3$$Register,
12659 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12660 %}
12661 ins_pipe( pipe_slow );
12662 %}
12664 // fast search of substring with known size.
12665 instruct string_indexof_con(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, immI int_cnt2,
12666 eBXRegI result, regXD vec, eAXRegI cnt2, eCXRegI tmp, eFlagsReg cr) %{
12667 predicate(UseSSE42Intrinsics);
12668 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 int_cnt2)));
12669 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, KILL cnt2, KILL tmp, KILL cr);
12671 format %{ "String IndexOf $str1,$cnt1,$str2,$int_cnt2 -> $result // KILL $vec, $cnt1, $cnt2, $tmp" %}
12672 ins_encode %{
12673 int icnt2 = (int)$int_cnt2$$constant;
12674 if (icnt2 >= 8) {
12675 // IndexOf for constant substrings with size >= 8 elements
12676 // which don't need to be loaded through stack.
12677 __ string_indexofC8($str1$$Register, $str2$$Register,
12678 $cnt1$$Register, $cnt2$$Register,
12679 icnt2, $result$$Register,
12680 $vec$$XMMRegister, $tmp$$Register);
12681 } else {
12682 // Small strings are loaded through stack if they cross page boundary.
12683 __ string_indexof($str1$$Register, $str2$$Register,
12684 $cnt1$$Register, $cnt2$$Register,
12685 icnt2, $result$$Register,
12686 $vec$$XMMRegister, $tmp$$Register);
12687 }
12688 %}
12689 ins_pipe( pipe_slow );
12690 %}
12692 instruct string_indexof(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, eAXRegI cnt2,
12693 eBXRegI result, regXD vec, eCXRegI tmp, eFlagsReg cr) %{
12694 predicate(UseSSE42Intrinsics);
12695 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 cnt2)));
12696 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL tmp, KILL cr);
12698 format %{ "String IndexOf $str1,$cnt1,$str2,$cnt2 -> $result // KILL all" %}
12699 ins_encode %{
12700 __ string_indexof($str1$$Register, $str2$$Register,
12701 $cnt1$$Register, $cnt2$$Register,
12702 (-1), $result$$Register,
12703 $vec$$XMMRegister, $tmp$$Register);
12704 %}
12705 ins_pipe( pipe_slow );
12706 %}
12708 // fast array equals
12709 instruct array_equals(eDIRegP ary1, eSIRegP ary2, eAXRegI result,
12710 regXD tmp1, regXD tmp2, eCXRegI tmp3, eBXRegI tmp4, eFlagsReg cr)
12711 %{
12712 match(Set result (AryEq ary1 ary2));
12713 effect(TEMP tmp1, TEMP tmp2, USE_KILL ary1, USE_KILL ary2, KILL tmp3, KILL tmp4, KILL cr);
12714 //ins_cost(300);
12716 format %{ "Array Equals $ary1,$ary2 -> $result // KILL $tmp1, $tmp2, $tmp3, $tmp4" %}
12717 ins_encode %{
12718 __ char_arrays_equals(true, $ary1$$Register, $ary2$$Register,
12719 $tmp3$$Register, $result$$Register, $tmp4$$Register,
12720 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12721 %}
12722 ins_pipe( pipe_slow );
12723 %}
12725 //----------Control Flow Instructions------------------------------------------
12726 // Signed compare Instructions
12727 instruct compI_eReg(eFlagsReg cr, eRegI op1, eRegI op2) %{
12728 match(Set cr (CmpI op1 op2));
12729 effect( DEF cr, USE op1, USE op2 );
12730 format %{ "CMP $op1,$op2" %}
12731 opcode(0x3B); /* Opcode 3B /r */
12732 ins_encode( OpcP, RegReg( op1, op2) );
12733 ins_pipe( ialu_cr_reg_reg );
12734 %}
12736 instruct compI_eReg_imm(eFlagsReg cr, eRegI op1, immI op2) %{
12737 match(Set cr (CmpI op1 op2));
12738 effect( DEF cr, USE op1 );
12739 format %{ "CMP $op1,$op2" %}
12740 opcode(0x81,0x07); /* Opcode 81 /7 */
12741 // ins_encode( RegImm( op1, op2) ); /* Was CmpImm */
12742 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12743 ins_pipe( ialu_cr_reg_imm );
12744 %}
12746 // Cisc-spilled version of cmpI_eReg
12747 instruct compI_eReg_mem(eFlagsReg cr, eRegI op1, memory op2) %{
12748 match(Set cr (CmpI op1 (LoadI op2)));
12750 format %{ "CMP $op1,$op2" %}
12751 ins_cost(500);
12752 opcode(0x3B); /* Opcode 3B /r */
12753 ins_encode( OpcP, RegMem( op1, op2) );
12754 ins_pipe( ialu_cr_reg_mem );
12755 %}
12757 instruct testI_reg( eFlagsReg cr, eRegI src, immI0 zero ) %{
12758 match(Set cr (CmpI src zero));
12759 effect( DEF cr, USE src );
12761 format %{ "TEST $src,$src" %}
12762 opcode(0x85);
12763 ins_encode( OpcP, RegReg( src, src ) );
12764 ins_pipe( ialu_cr_reg_imm );
12765 %}
12767 instruct testI_reg_imm( eFlagsReg cr, eRegI src, immI con, immI0 zero ) %{
12768 match(Set cr (CmpI (AndI src con) zero));
12770 format %{ "TEST $src,$con" %}
12771 opcode(0xF7,0x00);
12772 ins_encode( OpcP, RegOpc(src), Con32(con) );
12773 ins_pipe( ialu_cr_reg_imm );
12774 %}
12776 instruct testI_reg_mem( eFlagsReg cr, eRegI src, memory mem, immI0 zero ) %{
12777 match(Set cr (CmpI (AndI src mem) zero));
12779 format %{ "TEST $src,$mem" %}
12780 opcode(0x85);
12781 ins_encode( OpcP, RegMem( src, mem ) );
12782 ins_pipe( ialu_cr_reg_mem );
12783 %}
12785 // Unsigned compare Instructions; really, same as signed except they
12786 // produce an eFlagsRegU instead of eFlagsReg.
12787 instruct compU_eReg(eFlagsRegU cr, eRegI op1, eRegI op2) %{
12788 match(Set cr (CmpU op1 op2));
12790 format %{ "CMPu $op1,$op2" %}
12791 opcode(0x3B); /* Opcode 3B /r */
12792 ins_encode( OpcP, RegReg( op1, op2) );
12793 ins_pipe( ialu_cr_reg_reg );
12794 %}
12796 instruct compU_eReg_imm(eFlagsRegU cr, eRegI op1, immI op2) %{
12797 match(Set cr (CmpU op1 op2));
12799 format %{ "CMPu $op1,$op2" %}
12800 opcode(0x81,0x07); /* Opcode 81 /7 */
12801 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12802 ins_pipe( ialu_cr_reg_imm );
12803 %}
12805 // // Cisc-spilled version of cmpU_eReg
12806 instruct compU_eReg_mem(eFlagsRegU cr, eRegI op1, memory op2) %{
12807 match(Set cr (CmpU op1 (LoadI op2)));
12809 format %{ "CMPu $op1,$op2" %}
12810 ins_cost(500);
12811 opcode(0x3B); /* Opcode 3B /r */
12812 ins_encode( OpcP, RegMem( op1, op2) );
12813 ins_pipe( ialu_cr_reg_mem );
12814 %}
12816 // // Cisc-spilled version of cmpU_eReg
12817 //instruct compU_mem_eReg(eFlagsRegU cr, memory op1, eRegI op2) %{
12818 // match(Set cr (CmpU (LoadI op1) op2));
12819 //
12820 // format %{ "CMPu $op1,$op2" %}
12821 // ins_cost(500);
12822 // opcode(0x39); /* Opcode 39 /r */
12823 // ins_encode( OpcP, RegMem( op1, op2) );
12824 //%}
12826 instruct testU_reg( eFlagsRegU cr, eRegI src, immI0 zero ) %{
12827 match(Set cr (CmpU src zero));
12829 format %{ "TESTu $src,$src" %}
12830 opcode(0x85);
12831 ins_encode( OpcP, RegReg( src, src ) );
12832 ins_pipe( ialu_cr_reg_imm );
12833 %}
12835 // Unsigned pointer compare Instructions
12836 instruct compP_eReg(eFlagsRegU cr, eRegP op1, eRegP op2) %{
12837 match(Set cr (CmpP op1 op2));
12839 format %{ "CMPu $op1,$op2" %}
12840 opcode(0x3B); /* Opcode 3B /r */
12841 ins_encode( OpcP, RegReg( op1, op2) );
12842 ins_pipe( ialu_cr_reg_reg );
12843 %}
12845 instruct compP_eReg_imm(eFlagsRegU cr, eRegP op1, immP op2) %{
12846 match(Set cr (CmpP op1 op2));
12848 format %{ "CMPu $op1,$op2" %}
12849 opcode(0x81,0x07); /* Opcode 81 /7 */
12850 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12851 ins_pipe( ialu_cr_reg_imm );
12852 %}
12854 // // Cisc-spilled version of cmpP_eReg
12855 instruct compP_eReg_mem(eFlagsRegU cr, eRegP op1, memory op2) %{
12856 match(Set cr (CmpP op1 (LoadP op2)));
12858 format %{ "CMPu $op1,$op2" %}
12859 ins_cost(500);
12860 opcode(0x3B); /* Opcode 3B /r */
12861 ins_encode( OpcP, RegMem( op1, op2) );
12862 ins_pipe( ialu_cr_reg_mem );
12863 %}
12865 // // Cisc-spilled version of cmpP_eReg
12866 //instruct compP_mem_eReg(eFlagsRegU cr, memory op1, eRegP op2) %{
12867 // match(Set cr (CmpP (LoadP op1) op2));
12868 //
12869 // format %{ "CMPu $op1,$op2" %}
12870 // ins_cost(500);
12871 // opcode(0x39); /* Opcode 39 /r */
12872 // ins_encode( OpcP, RegMem( op1, op2) );
12873 //%}
12875 // Compare raw pointer (used in out-of-heap check).
12876 // Only works because non-oop pointers must be raw pointers
12877 // and raw pointers have no anti-dependencies.
12878 instruct compP_mem_eReg( eFlagsRegU cr, eRegP op1, memory op2 ) %{
12879 predicate( !n->in(2)->in(2)->bottom_type()->isa_oop_ptr() );
12880 match(Set cr (CmpP op1 (LoadP op2)));
12882 format %{ "CMPu $op1,$op2" %}
12883 opcode(0x3B); /* Opcode 3B /r */
12884 ins_encode( OpcP, RegMem( op1, op2) );
12885 ins_pipe( ialu_cr_reg_mem );
12886 %}
12888 //
12889 // This will generate a signed flags result. This should be ok
12890 // since any compare to a zero should be eq/neq.
12891 instruct testP_reg( eFlagsReg cr, eRegP src, immP0 zero ) %{
12892 match(Set cr (CmpP src zero));
12894 format %{ "TEST $src,$src" %}
12895 opcode(0x85);
12896 ins_encode( OpcP, RegReg( src, src ) );
12897 ins_pipe( ialu_cr_reg_imm );
12898 %}
12900 // Cisc-spilled version of testP_reg
12901 // This will generate a signed flags result. This should be ok
12902 // since any compare to a zero should be eq/neq.
12903 instruct testP_Reg_mem( eFlagsReg cr, memory op, immI0 zero ) %{
12904 match(Set cr (CmpP (LoadP op) zero));
12906 format %{ "TEST $op,0xFFFFFFFF" %}
12907 ins_cost(500);
12908 opcode(0xF7); /* Opcode F7 /0 */
12909 ins_encode( OpcP, RMopc_Mem(0x00,op), Con_d32(0xFFFFFFFF) );
12910 ins_pipe( ialu_cr_reg_imm );
12911 %}
12913 // Yanked all unsigned pointer compare operations.
12914 // Pointer compares are done with CmpP which is already unsigned.
12916 //----------Max and Min--------------------------------------------------------
12917 // Min Instructions
12918 ////
12919 // *** Min and Max using the conditional move are slower than the
12920 // *** branch version on a Pentium III.
12921 // // Conditional move for min
12922 //instruct cmovI_reg_lt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12923 // effect( USE_DEF op2, USE op1, USE cr );
12924 // format %{ "CMOVlt $op2,$op1\t! min" %}
12925 // opcode(0x4C,0x0F);
12926 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12927 // ins_pipe( pipe_cmov_reg );
12928 //%}
12929 //
12930 //// Min Register with Register (P6 version)
12931 //instruct minI_eReg_p6( eRegI op1, eRegI op2 ) %{
12932 // predicate(VM_Version::supports_cmov() );
12933 // match(Set op2 (MinI op1 op2));
12934 // ins_cost(200);
12935 // expand %{
12936 // eFlagsReg cr;
12937 // compI_eReg(cr,op1,op2);
12938 // cmovI_reg_lt(op2,op1,cr);
12939 // %}
12940 //%}
12942 // Min Register with Register (generic version)
12943 instruct minI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12944 match(Set dst (MinI dst src));
12945 effect(KILL flags);
12946 ins_cost(300);
12948 format %{ "MIN $dst,$src" %}
12949 opcode(0xCC);
12950 ins_encode( min_enc(dst,src) );
12951 ins_pipe( pipe_slow );
12952 %}
12954 // Max Register with Register
12955 // *** Min and Max using the conditional move are slower than the
12956 // *** branch version on a Pentium III.
12957 // // Conditional move for max
12958 //instruct cmovI_reg_gt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12959 // effect( USE_DEF op2, USE op1, USE cr );
12960 // format %{ "CMOVgt $op2,$op1\t! max" %}
12961 // opcode(0x4F,0x0F);
12962 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12963 // ins_pipe( pipe_cmov_reg );
12964 //%}
12965 //
12966 // // Max Register with Register (P6 version)
12967 //instruct maxI_eReg_p6( eRegI op1, eRegI op2 ) %{
12968 // predicate(VM_Version::supports_cmov() );
12969 // match(Set op2 (MaxI op1 op2));
12970 // ins_cost(200);
12971 // expand %{
12972 // eFlagsReg cr;
12973 // compI_eReg(cr,op1,op2);
12974 // cmovI_reg_gt(op2,op1,cr);
12975 // %}
12976 //%}
12978 // Max Register with Register (generic version)
12979 instruct maxI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12980 match(Set dst (MaxI dst src));
12981 effect(KILL flags);
12982 ins_cost(300);
12984 format %{ "MAX $dst,$src" %}
12985 opcode(0xCC);
12986 ins_encode( max_enc(dst,src) );
12987 ins_pipe( pipe_slow );
12988 %}
12990 // ============================================================================
12991 // Counted Loop limit node which represents exact final iterator value.
12992 // Note: the resulting value should fit into integer range since
12993 // counted loops have limit check on overflow.
12994 instruct loopLimit_eReg(eAXRegI limit, nadxRegI init, immI stride, eDXRegI limit_hi, nadxRegI tmp, eFlagsReg flags) %{
12995 match(Set limit (LoopLimit (Binary init limit) stride));
12996 effect(TEMP limit_hi, TEMP tmp, KILL flags);
12997 ins_cost(300);
12999 format %{ "loopLimit $init,$limit,$stride # $limit = $init + $stride *( $limit - $init + $stride -1)/ $stride, kills $limit_hi" %}
13000 ins_encode %{
13001 int strd = (int)$stride$$constant;
13002 assert(strd != 1 && strd != -1, "sanity");
13003 int m1 = (strd > 0) ? 1 : -1;
13004 // Convert limit to long (EAX:EDX)
13005 __ cdql();
13006 // Convert init to long (init:tmp)
13007 __ movl($tmp$$Register, $init$$Register);
13008 __ sarl($tmp$$Register, 31);
13009 // $limit - $init
13010 __ subl($limit$$Register, $init$$Register);
13011 __ sbbl($limit_hi$$Register, $tmp$$Register);
13012 // + ($stride - 1)
13013 if (strd > 0) {
13014 __ addl($limit$$Register, (strd - 1));
13015 __ adcl($limit_hi$$Register, 0);
13016 __ movl($tmp$$Register, strd);
13017 } else {
13018 __ addl($limit$$Register, (strd + 1));
13019 __ adcl($limit_hi$$Register, -1);
13020 __ lneg($limit_hi$$Register, $limit$$Register);
13021 __ movl($tmp$$Register, -strd);
13022 }
13023 // signed devision: (EAX:EDX) / pos_stride
13024 __ idivl($tmp$$Register);
13025 if (strd < 0) {
13026 // restore sign
13027 __ negl($tmp$$Register);
13028 }
13029 // (EAX) * stride
13030 __ mull($tmp$$Register);
13031 // + init (ignore upper bits)
13032 __ addl($limit$$Register, $init$$Register);
13033 %}
13034 ins_pipe( pipe_slow );
13035 %}
13037 // ============================================================================
13038 // Branch Instructions
13039 // Jump Table
13040 instruct jumpXtnd(eRegI switch_val) %{
13041 match(Jump switch_val);
13042 ins_cost(350);
13043 format %{ "JMP [$constantaddress](,$switch_val,1)\n\t" %}
13044 ins_encode %{
13045 // Jump to Address(table_base + switch_reg)
13046 Address index(noreg, $switch_val$$Register, Address::times_1);
13047 __ jump(ArrayAddress($constantaddress, index));
13048 %}
13049 ins_pipe(pipe_jmp);
13050 %}
13052 // Jump Direct - Label defines a relative address from JMP+1
13053 instruct jmpDir(label labl) %{
13054 match(Goto);
13055 effect(USE labl);
13057 ins_cost(300);
13058 format %{ "JMP $labl" %}
13059 size(5);
13060 opcode(0xE9);
13061 ins_encode( OpcP, Lbl( labl ) );
13062 ins_pipe( pipe_jmp );
13063 %}
13065 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13066 instruct jmpCon(cmpOp cop, eFlagsReg cr, label labl) %{
13067 match(If cop cr);
13068 effect(USE labl);
13070 ins_cost(300);
13071 format %{ "J$cop $labl" %}
13072 size(6);
13073 opcode(0x0F, 0x80);
13074 ins_encode( Jcc( cop, labl) );
13075 ins_pipe( pipe_jcc );
13076 %}
13078 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13079 instruct jmpLoopEnd(cmpOp cop, eFlagsReg cr, label labl) %{
13080 match(CountedLoopEnd cop cr);
13081 effect(USE labl);
13083 ins_cost(300);
13084 format %{ "J$cop $labl\t# Loop end" %}
13085 size(6);
13086 opcode(0x0F, 0x80);
13087 ins_encode( Jcc( cop, labl) );
13088 ins_pipe( pipe_jcc );
13089 %}
13091 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13092 instruct jmpLoopEndU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13093 match(CountedLoopEnd cop cmp);
13094 effect(USE labl);
13096 ins_cost(300);
13097 format %{ "J$cop,u $labl\t# Loop end" %}
13098 size(6);
13099 opcode(0x0F, 0x80);
13100 ins_encode( Jcc( cop, labl) );
13101 ins_pipe( pipe_jcc );
13102 %}
13104 instruct jmpLoopEndUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13105 match(CountedLoopEnd cop cmp);
13106 effect(USE labl);
13108 ins_cost(200);
13109 format %{ "J$cop,u $labl\t# Loop end" %}
13110 size(6);
13111 opcode(0x0F, 0x80);
13112 ins_encode( Jcc( cop, labl) );
13113 ins_pipe( pipe_jcc );
13114 %}
13116 // Jump Direct Conditional - using unsigned comparison
13117 instruct jmpConU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13118 match(If cop cmp);
13119 effect(USE labl);
13121 ins_cost(300);
13122 format %{ "J$cop,u $labl" %}
13123 size(6);
13124 opcode(0x0F, 0x80);
13125 ins_encode(Jcc(cop, labl));
13126 ins_pipe(pipe_jcc);
13127 %}
13129 instruct jmpConUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13130 match(If cop cmp);
13131 effect(USE labl);
13133 ins_cost(200);
13134 format %{ "J$cop,u $labl" %}
13135 size(6);
13136 opcode(0x0F, 0x80);
13137 ins_encode(Jcc(cop, labl));
13138 ins_pipe(pipe_jcc);
13139 %}
13141 instruct jmpConUCF2(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
13142 match(If cop cmp);
13143 effect(USE labl);
13145 ins_cost(200);
13146 format %{ $$template
13147 if ($cop$$cmpcode == Assembler::notEqual) {
13148 $$emit$$"JP,u $labl\n\t"
13149 $$emit$$"J$cop,u $labl"
13150 } else {
13151 $$emit$$"JP,u done\n\t"
13152 $$emit$$"J$cop,u $labl\n\t"
13153 $$emit$$"done:"
13154 }
13155 %}
13156 size(12);
13157 opcode(0x0F, 0x80);
13158 ins_encode %{
13159 Label* l = $labl$$label;
13160 $$$emit8$primary;
13161 emit_cc(cbuf, $secondary, Assembler::parity);
13162 int parity_disp = -1;
13163 bool ok = false;
13164 if ($cop$$cmpcode == Assembler::notEqual) {
13165 // the two jumps 6 bytes apart so the jump distances are too
13166 parity_disp = l->loc_pos() - (cbuf.insts_size() + 4);
13167 } else if ($cop$$cmpcode == Assembler::equal) {
13168 parity_disp = 6;
13169 ok = true;
13170 } else {
13171 ShouldNotReachHere();
13172 }
13173 emit_d32(cbuf, parity_disp);
13174 $$$emit8$primary;
13175 emit_cc(cbuf, $secondary, $cop$$cmpcode);
13176 int disp = l->loc_pos() - (cbuf.insts_size() + 4);
13177 emit_d32(cbuf, disp);
13178 %}
13179 ins_pipe(pipe_jcc);
13180 %}
13182 // ============================================================================
13183 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass
13184 // array for an instance of the superklass. Set a hidden internal cache on a
13185 // hit (cache is checked with exposed code in gen_subtype_check()). Return
13186 // NZ for a miss or zero for a hit. The encoding ALSO sets flags.
13187 instruct partialSubtypeCheck( eDIRegP result, eSIRegP sub, eAXRegP super, eCXRegI rcx, eFlagsReg cr ) %{
13188 match(Set result (PartialSubtypeCheck sub super));
13189 effect( KILL rcx, KILL cr );
13191 ins_cost(1100); // slightly larger than the next version
13192 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
13193 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
13194 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
13195 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
13196 "JNE,s miss\t\t# Missed: EDI not-zero\n\t"
13197 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache\n\t"
13198 "XOR $result,$result\t\t Hit: EDI zero\n\t"
13199 "miss:\t" %}
13201 opcode(0x1); // Force a XOR of EDI
13202 ins_encode( enc_PartialSubtypeCheck() );
13203 ins_pipe( pipe_slow );
13204 %}
13206 instruct partialSubtypeCheck_vs_Zero( eFlagsReg cr, eSIRegP sub, eAXRegP super, eCXRegI rcx, eDIRegP result, immP0 zero ) %{
13207 match(Set cr (CmpP (PartialSubtypeCheck sub super) zero));
13208 effect( KILL rcx, KILL result );
13210 ins_cost(1000);
13211 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
13212 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
13213 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
13214 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
13215 "JNE,s miss\t\t# Missed: flags NZ\n\t"
13216 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache, flags Z\n\t"
13217 "miss:\t" %}
13219 opcode(0x0); // No need to XOR EDI
13220 ins_encode( enc_PartialSubtypeCheck() );
13221 ins_pipe( pipe_slow );
13222 %}
13224 // ============================================================================
13225 // Branch Instructions -- short offset versions
13226 //
13227 // These instructions are used to replace jumps of a long offset (the default
13228 // match) with jumps of a shorter offset. These instructions are all tagged
13229 // with the ins_short_branch attribute, which causes the ADLC to suppress the
13230 // match rules in general matching. Instead, the ADLC generates a conversion
13231 // method in the MachNode which can be used to do in-place replacement of the
13232 // long variant with the shorter variant. The compiler will determine if a
13233 // branch can be taken by the is_short_branch_offset() predicate in the machine
13234 // specific code section of the file.
13236 // Jump Direct - Label defines a relative address from JMP+1
13237 instruct jmpDir_short(label labl) %{
13238 match(Goto);
13239 effect(USE labl);
13241 ins_cost(300);
13242 format %{ "JMP,s $labl" %}
13243 size(2);
13244 opcode(0xEB);
13245 ins_encode( OpcP, LblShort( labl ) );
13246 ins_pipe( pipe_jmp );
13247 ins_short_branch(1);
13248 %}
13250 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13251 instruct jmpCon_short(cmpOp cop, eFlagsReg cr, label labl) %{
13252 match(If cop cr);
13253 effect(USE labl);
13255 ins_cost(300);
13256 format %{ "J$cop,s $labl" %}
13257 size(2);
13258 opcode(0x70);
13259 ins_encode( JccShort( cop, labl) );
13260 ins_pipe( pipe_jcc );
13261 ins_short_branch(1);
13262 %}
13264 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13265 instruct jmpLoopEnd_short(cmpOp cop, eFlagsReg cr, label labl) %{
13266 match(CountedLoopEnd cop cr);
13267 effect(USE labl);
13269 ins_cost(300);
13270 format %{ "J$cop,s $labl\t# Loop end" %}
13271 size(2);
13272 opcode(0x70);
13273 ins_encode( JccShort( cop, labl) );
13274 ins_pipe( pipe_jcc );
13275 ins_short_branch(1);
13276 %}
13278 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13279 instruct jmpLoopEndU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13280 match(CountedLoopEnd cop cmp);
13281 effect(USE labl);
13283 ins_cost(300);
13284 format %{ "J$cop,us $labl\t# Loop end" %}
13285 size(2);
13286 opcode(0x70);
13287 ins_encode( JccShort( cop, labl) );
13288 ins_pipe( pipe_jcc );
13289 ins_short_branch(1);
13290 %}
13292 instruct jmpLoopEndUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13293 match(CountedLoopEnd cop cmp);
13294 effect(USE labl);
13296 ins_cost(300);
13297 format %{ "J$cop,us $labl\t# Loop end" %}
13298 size(2);
13299 opcode(0x70);
13300 ins_encode( JccShort( cop, labl) );
13301 ins_pipe( pipe_jcc );
13302 ins_short_branch(1);
13303 %}
13305 // Jump Direct Conditional - using unsigned comparison
13306 instruct jmpConU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13307 match(If cop cmp);
13308 effect(USE labl);
13310 ins_cost(300);
13311 format %{ "J$cop,us $labl" %}
13312 size(2);
13313 opcode(0x70);
13314 ins_encode( JccShort( cop, labl) );
13315 ins_pipe( pipe_jcc );
13316 ins_short_branch(1);
13317 %}
13319 instruct jmpConUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13320 match(If cop cmp);
13321 effect(USE labl);
13323 ins_cost(300);
13324 format %{ "J$cop,us $labl" %}
13325 size(2);
13326 opcode(0x70);
13327 ins_encode( JccShort( cop, labl) );
13328 ins_pipe( pipe_jcc );
13329 ins_short_branch(1);
13330 %}
13332 instruct jmpConUCF2_short(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
13333 match(If cop cmp);
13334 effect(USE labl);
13336 ins_cost(300);
13337 format %{ $$template
13338 if ($cop$$cmpcode == Assembler::notEqual) {
13339 $$emit$$"JP,u,s $labl\n\t"
13340 $$emit$$"J$cop,u,s $labl"
13341 } else {
13342 $$emit$$"JP,u,s done\n\t"
13343 $$emit$$"J$cop,u,s $labl\n\t"
13344 $$emit$$"done:"
13345 }
13346 %}
13347 size(4);
13348 opcode(0x70);
13349 ins_encode %{
13350 Label* l = $labl$$label;
13351 emit_cc(cbuf, $primary, Assembler::parity);
13352 int parity_disp = -1;
13353 if ($cop$$cmpcode == Assembler::notEqual) {
13354 parity_disp = l->loc_pos() - (cbuf.insts_size() + 1);
13355 } else if ($cop$$cmpcode == Assembler::equal) {
13356 parity_disp = 2;
13357 } else {
13358 ShouldNotReachHere();
13359 }
13360 emit_d8(cbuf, parity_disp);
13361 emit_cc(cbuf, $primary, $cop$$cmpcode);
13362 int disp = l->loc_pos() - (cbuf.insts_size() + 1);
13363 emit_d8(cbuf, disp);
13364 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
13365 assert(-128 <= parity_disp && parity_disp <= 127, "Displacement too large for short jmp");
13366 %}
13367 ins_pipe(pipe_jcc);
13368 ins_short_branch(1);
13369 %}
13371 // ============================================================================
13372 // Long Compare
13373 //
13374 // Currently we hold longs in 2 registers. Comparing such values efficiently
13375 // is tricky. The flavor of compare used depends on whether we are testing
13376 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit.
13377 // The GE test is the negated LT test. The LE test can be had by commuting
13378 // the operands (yielding a GE test) and then negating; negate again for the
13379 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the
13380 // NE test is negated from that.
13382 // Due to a shortcoming in the ADLC, it mixes up expressions like:
13383 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the
13384 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections
13385 // are collapsed internally in the ADLC's dfa-gen code. The match for
13386 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the
13387 // foo match ends up with the wrong leaf. One fix is to not match both
13388 // reg-reg and reg-zero forms of long-compare. This is unfortunate because
13389 // both forms beat the trinary form of long-compare and both are very useful
13390 // on Intel which has so few registers.
13392 // Manifest a CmpL result in an integer register. Very painful.
13393 // This is the test to avoid.
13394 instruct cmpL3_reg_reg(eSIRegI dst, eRegL src1, eRegL src2, eFlagsReg flags ) %{
13395 match(Set dst (CmpL3 src1 src2));
13396 effect( KILL flags );
13397 ins_cost(1000);
13398 format %{ "XOR $dst,$dst\n\t"
13399 "CMP $src1.hi,$src2.hi\n\t"
13400 "JLT,s m_one\n\t"
13401 "JGT,s p_one\n\t"
13402 "CMP $src1.lo,$src2.lo\n\t"
13403 "JB,s m_one\n\t"
13404 "JEQ,s done\n"
13405 "p_one:\tINC $dst\n\t"
13406 "JMP,s done\n"
13407 "m_one:\tDEC $dst\n"
13408 "done:" %}
13409 ins_encode %{
13410 Label p_one, m_one, done;
13411 __ xorptr($dst$$Register, $dst$$Register);
13412 __ cmpl(HIGH_FROM_LOW($src1$$Register), HIGH_FROM_LOW($src2$$Register));
13413 __ jccb(Assembler::less, m_one);
13414 __ jccb(Assembler::greater, p_one);
13415 __ cmpl($src1$$Register, $src2$$Register);
13416 __ jccb(Assembler::below, m_one);
13417 __ jccb(Assembler::equal, done);
13418 __ bind(p_one);
13419 __ incrementl($dst$$Register);
13420 __ jmpb(done);
13421 __ bind(m_one);
13422 __ decrementl($dst$$Register);
13423 __ bind(done);
13424 %}
13425 ins_pipe( pipe_slow );
13426 %}
13428 //======
13429 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13430 // compares. Can be used for LE or GT compares by reversing arguments.
13431 // NOT GOOD FOR EQ/NE tests.
13432 instruct cmpL_zero_flags_LTGE( flagsReg_long_LTGE flags, eRegL src, immL0 zero ) %{
13433 match( Set flags (CmpL src zero ));
13434 ins_cost(100);
13435 format %{ "TEST $src.hi,$src.hi" %}
13436 opcode(0x85);
13437 ins_encode( OpcP, RegReg_Hi2( src, src ) );
13438 ins_pipe( ialu_cr_reg_reg );
13439 %}
13441 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13442 // compares. Can be used for LE or GT compares by reversing arguments.
13443 // NOT GOOD FOR EQ/NE tests.
13444 instruct cmpL_reg_flags_LTGE( flagsReg_long_LTGE flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13445 match( Set flags (CmpL src1 src2 ));
13446 effect( TEMP tmp );
13447 ins_cost(300);
13448 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13449 "MOV $tmp,$src1.hi\n\t"
13450 "SBB $tmp,$src2.hi\t! Compute flags for long compare" %}
13451 ins_encode( long_cmp_flags2( src1, src2, tmp ) );
13452 ins_pipe( ialu_cr_reg_reg );
13453 %}
13455 // Long compares reg < zero/req OR reg >= zero/req.
13456 // Just a wrapper for a normal branch, plus the predicate test.
13457 instruct cmpL_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, label labl) %{
13458 match(If cmp flags);
13459 effect(USE labl);
13460 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13461 expand %{
13462 jmpCon(cmp,flags,labl); // JLT or JGE...
13463 %}
13464 %}
13466 // Compare 2 longs and CMOVE longs.
13467 instruct cmovLL_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, eRegL src) %{
13468 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13469 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13470 ins_cost(400);
13471 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13472 "CMOV$cmp $dst.hi,$src.hi" %}
13473 opcode(0x0F,0x40);
13474 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13475 ins_pipe( pipe_cmov_reg_long );
13476 %}
13478 instruct cmovLL_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, load_long_memory src) %{
13479 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13480 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13481 ins_cost(500);
13482 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13483 "CMOV$cmp $dst.hi,$src.hi" %}
13484 opcode(0x0F,0x40);
13485 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13486 ins_pipe( pipe_cmov_reg_long );
13487 %}
13489 // Compare 2 longs and CMOVE ints.
13490 instruct cmovII_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, eRegI src) %{
13491 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13492 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13493 ins_cost(200);
13494 format %{ "CMOV$cmp $dst,$src" %}
13495 opcode(0x0F,0x40);
13496 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13497 ins_pipe( pipe_cmov_reg );
13498 %}
13500 instruct cmovII_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, memory src) %{
13501 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13502 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13503 ins_cost(250);
13504 format %{ "CMOV$cmp $dst,$src" %}
13505 opcode(0x0F,0x40);
13506 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13507 ins_pipe( pipe_cmov_mem );
13508 %}
13510 // Compare 2 longs and CMOVE ints.
13511 instruct cmovPP_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegP dst, eRegP src) %{
13512 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13513 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13514 ins_cost(200);
13515 format %{ "CMOV$cmp $dst,$src" %}
13516 opcode(0x0F,0x40);
13517 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13518 ins_pipe( pipe_cmov_reg );
13519 %}
13521 // Compare 2 longs and CMOVE doubles
13522 instruct cmovDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regD dst, regD src) %{
13523 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13524 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13525 ins_cost(200);
13526 expand %{
13527 fcmovD_regS(cmp,flags,dst,src);
13528 %}
13529 %}
13531 // Compare 2 longs and CMOVE doubles
13532 instruct cmovXDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regXD dst, regXD src) %{
13533 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13534 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13535 ins_cost(200);
13536 expand %{
13537 fcmovXD_regS(cmp,flags,dst,src);
13538 %}
13539 %}
13541 instruct cmovFF_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regF dst, regF src) %{
13542 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13543 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13544 ins_cost(200);
13545 expand %{
13546 fcmovF_regS(cmp,flags,dst,src);
13547 %}
13548 %}
13550 instruct cmovXX_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regX dst, regX src) %{
13551 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13552 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13553 ins_cost(200);
13554 expand %{
13555 fcmovX_regS(cmp,flags,dst,src);
13556 %}
13557 %}
13559 //======
13560 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13561 instruct cmpL_zero_flags_EQNE( flagsReg_long_EQNE flags, eRegL src, immL0 zero, eRegI tmp ) %{
13562 match( Set flags (CmpL src zero ));
13563 effect(TEMP tmp);
13564 ins_cost(200);
13565 format %{ "MOV $tmp,$src.lo\n\t"
13566 "OR $tmp,$src.hi\t! Long is EQ/NE 0?" %}
13567 ins_encode( long_cmp_flags0( src, tmp ) );
13568 ins_pipe( ialu_reg_reg_long );
13569 %}
13571 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13572 instruct cmpL_reg_flags_EQNE( flagsReg_long_EQNE flags, eRegL src1, eRegL src2 ) %{
13573 match( Set flags (CmpL src1 src2 ));
13574 ins_cost(200+300);
13575 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13576 "JNE,s skip\n\t"
13577 "CMP $src1.hi,$src2.hi\n\t"
13578 "skip:\t" %}
13579 ins_encode( long_cmp_flags1( src1, src2 ) );
13580 ins_pipe( ialu_cr_reg_reg );
13581 %}
13583 // Long compare reg == zero/reg OR reg != zero/reg
13584 // Just a wrapper for a normal branch, plus the predicate test.
13585 instruct cmpL_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, label labl) %{
13586 match(If cmp flags);
13587 effect(USE labl);
13588 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13589 expand %{
13590 jmpCon(cmp,flags,labl); // JEQ or JNE...
13591 %}
13592 %}
13594 // Compare 2 longs and CMOVE longs.
13595 instruct cmovLL_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, eRegL src) %{
13596 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13597 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13598 ins_cost(400);
13599 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13600 "CMOV$cmp $dst.hi,$src.hi" %}
13601 opcode(0x0F,0x40);
13602 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13603 ins_pipe( pipe_cmov_reg_long );
13604 %}
13606 instruct cmovLL_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, load_long_memory src) %{
13607 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13608 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13609 ins_cost(500);
13610 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13611 "CMOV$cmp $dst.hi,$src.hi" %}
13612 opcode(0x0F,0x40);
13613 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13614 ins_pipe( pipe_cmov_reg_long );
13615 %}
13617 // Compare 2 longs and CMOVE ints.
13618 instruct cmovII_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, eRegI src) %{
13619 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13620 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13621 ins_cost(200);
13622 format %{ "CMOV$cmp $dst,$src" %}
13623 opcode(0x0F,0x40);
13624 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13625 ins_pipe( pipe_cmov_reg );
13626 %}
13628 instruct cmovII_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, memory src) %{
13629 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13630 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13631 ins_cost(250);
13632 format %{ "CMOV$cmp $dst,$src" %}
13633 opcode(0x0F,0x40);
13634 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13635 ins_pipe( pipe_cmov_mem );
13636 %}
13638 // Compare 2 longs and CMOVE ints.
13639 instruct cmovPP_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegP dst, eRegP src) %{
13640 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13641 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13642 ins_cost(200);
13643 format %{ "CMOV$cmp $dst,$src" %}
13644 opcode(0x0F,0x40);
13645 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13646 ins_pipe( pipe_cmov_reg );
13647 %}
13649 // Compare 2 longs and CMOVE doubles
13650 instruct cmovDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regD dst, regD src) %{
13651 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13652 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13653 ins_cost(200);
13654 expand %{
13655 fcmovD_regS(cmp,flags,dst,src);
13656 %}
13657 %}
13659 // Compare 2 longs and CMOVE doubles
13660 instruct cmovXDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regXD dst, regXD src) %{
13661 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13662 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13663 ins_cost(200);
13664 expand %{
13665 fcmovXD_regS(cmp,flags,dst,src);
13666 %}
13667 %}
13669 instruct cmovFF_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regF dst, regF src) %{
13670 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13671 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13672 ins_cost(200);
13673 expand %{
13674 fcmovF_regS(cmp,flags,dst,src);
13675 %}
13676 %}
13678 instruct cmovXX_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regX dst, regX src) %{
13679 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13680 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13681 ins_cost(200);
13682 expand %{
13683 fcmovX_regS(cmp,flags,dst,src);
13684 %}
13685 %}
13687 //======
13688 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13689 // Same as cmpL_reg_flags_LEGT except must negate src
13690 instruct cmpL_zero_flags_LEGT( flagsReg_long_LEGT flags, eRegL src, immL0 zero, eRegI tmp ) %{
13691 match( Set flags (CmpL src zero ));
13692 effect( TEMP tmp );
13693 ins_cost(300);
13694 format %{ "XOR $tmp,$tmp\t# Long compare for -$src < 0, use commuted test\n\t"
13695 "CMP $tmp,$src.lo\n\t"
13696 "SBB $tmp,$src.hi\n\t" %}
13697 ins_encode( long_cmp_flags3(src, tmp) );
13698 ins_pipe( ialu_reg_reg_long );
13699 %}
13701 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13702 // Same as cmpL_reg_flags_LTGE except operands swapped. Swapping operands
13703 // requires a commuted test to get the same result.
13704 instruct cmpL_reg_flags_LEGT( flagsReg_long_LEGT flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13705 match( Set flags (CmpL src1 src2 ));
13706 effect( TEMP tmp );
13707 ins_cost(300);
13708 format %{ "CMP $src2.lo,$src1.lo\t! Long compare, swapped operands, use with commuted test\n\t"
13709 "MOV $tmp,$src2.hi\n\t"
13710 "SBB $tmp,$src1.hi\t! Compute flags for long compare" %}
13711 ins_encode( long_cmp_flags2( src2, src1, tmp ) );
13712 ins_pipe( ialu_cr_reg_reg );
13713 %}
13715 // Long compares reg < zero/req OR reg >= zero/req.
13716 // Just a wrapper for a normal branch, plus the predicate test
13717 instruct cmpL_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, label labl) %{
13718 match(If cmp flags);
13719 effect(USE labl);
13720 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le );
13721 ins_cost(300);
13722 expand %{
13723 jmpCon(cmp,flags,labl); // JGT or JLE...
13724 %}
13725 %}
13727 // Compare 2 longs and CMOVE longs.
13728 instruct cmovLL_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, eRegL src) %{
13729 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13730 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13731 ins_cost(400);
13732 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13733 "CMOV$cmp $dst.hi,$src.hi" %}
13734 opcode(0x0F,0x40);
13735 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13736 ins_pipe( pipe_cmov_reg_long );
13737 %}
13739 instruct cmovLL_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, load_long_memory src) %{
13740 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13741 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13742 ins_cost(500);
13743 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13744 "CMOV$cmp $dst.hi,$src.hi+4" %}
13745 opcode(0x0F,0x40);
13746 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13747 ins_pipe( pipe_cmov_reg_long );
13748 %}
13750 // Compare 2 longs and CMOVE ints.
13751 instruct cmovII_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, eRegI src) %{
13752 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13753 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13754 ins_cost(200);
13755 format %{ "CMOV$cmp $dst,$src" %}
13756 opcode(0x0F,0x40);
13757 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13758 ins_pipe( pipe_cmov_reg );
13759 %}
13761 instruct cmovII_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, memory src) %{
13762 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13763 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13764 ins_cost(250);
13765 format %{ "CMOV$cmp $dst,$src" %}
13766 opcode(0x0F,0x40);
13767 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13768 ins_pipe( pipe_cmov_mem );
13769 %}
13771 // Compare 2 longs and CMOVE ptrs.
13772 instruct cmovPP_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegP dst, eRegP src) %{
13773 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13774 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13775 ins_cost(200);
13776 format %{ "CMOV$cmp $dst,$src" %}
13777 opcode(0x0F,0x40);
13778 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13779 ins_pipe( pipe_cmov_reg );
13780 %}
13782 // Compare 2 longs and CMOVE doubles
13783 instruct cmovDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regD dst, regD src) %{
13784 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13785 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13786 ins_cost(200);
13787 expand %{
13788 fcmovD_regS(cmp,flags,dst,src);
13789 %}
13790 %}
13792 // Compare 2 longs and CMOVE doubles
13793 instruct cmovXDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regXD dst, regXD src) %{
13794 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13795 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13796 ins_cost(200);
13797 expand %{
13798 fcmovXD_regS(cmp,flags,dst,src);
13799 %}
13800 %}
13802 instruct cmovFF_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regF dst, regF src) %{
13803 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13804 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13805 ins_cost(200);
13806 expand %{
13807 fcmovF_regS(cmp,flags,dst,src);
13808 %}
13809 %}
13812 instruct cmovXX_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regX dst, regX src) %{
13813 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13814 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13815 ins_cost(200);
13816 expand %{
13817 fcmovX_regS(cmp,flags,dst,src);
13818 %}
13819 %}
13822 // ============================================================================
13823 // Procedure Call/Return Instructions
13824 // Call Java Static Instruction
13825 // Note: If this code changes, the corresponding ret_addr_offset() and
13826 // compute_padding() functions will have to be adjusted.
13827 instruct CallStaticJavaDirect(method meth) %{
13828 match(CallStaticJava);
13829 predicate(! ((CallStaticJavaNode*)n)->is_method_handle_invoke());
13830 effect(USE meth);
13832 ins_cost(300);
13833 format %{ "CALL,static " %}
13834 opcode(0xE8); /* E8 cd */
13835 ins_encode( pre_call_FPU,
13836 Java_Static_Call( meth ),
13837 call_epilog,
13838 post_call_FPU );
13839 ins_pipe( pipe_slow );
13840 ins_alignment(4);
13841 %}
13843 // Call Java Static Instruction (method handle version)
13844 // Note: If this code changes, the corresponding ret_addr_offset() and
13845 // compute_padding() functions will have to be adjusted.
13846 instruct CallStaticJavaHandle(method meth, eBPRegP ebp_mh_SP_save) %{
13847 match(CallStaticJava);
13848 predicate(((CallStaticJavaNode*)n)->is_method_handle_invoke());
13849 effect(USE meth);
13850 // EBP is saved by all callees (for interpreter stack correction).
13851 // We use it here for a similar purpose, in {preserve,restore}_SP.
13853 ins_cost(300);
13854 format %{ "CALL,static/MethodHandle " %}
13855 opcode(0xE8); /* E8 cd */
13856 ins_encode( pre_call_FPU,
13857 preserve_SP,
13858 Java_Static_Call( meth ),
13859 restore_SP,
13860 call_epilog,
13861 post_call_FPU );
13862 ins_pipe( pipe_slow );
13863 ins_alignment(4);
13864 %}
13866 // Call Java Dynamic Instruction
13867 // Note: If this code changes, the corresponding ret_addr_offset() and
13868 // compute_padding() functions will have to be adjusted.
13869 instruct CallDynamicJavaDirect(method meth) %{
13870 match(CallDynamicJava);
13871 effect(USE meth);
13873 ins_cost(300);
13874 format %{ "MOV EAX,(oop)-1\n\t"
13875 "CALL,dynamic" %}
13876 opcode(0xE8); /* E8 cd */
13877 ins_encode( pre_call_FPU,
13878 Java_Dynamic_Call( meth ),
13879 call_epilog,
13880 post_call_FPU );
13881 ins_pipe( pipe_slow );
13882 ins_alignment(4);
13883 %}
13885 // Call Runtime Instruction
13886 instruct CallRuntimeDirect(method meth) %{
13887 match(CallRuntime );
13888 effect(USE meth);
13890 ins_cost(300);
13891 format %{ "CALL,runtime " %}
13892 opcode(0xE8); /* E8 cd */
13893 // Use FFREEs to clear entries in float stack
13894 ins_encode( pre_call_FPU,
13895 FFree_Float_Stack_All,
13896 Java_To_Runtime( meth ),
13897 post_call_FPU );
13898 ins_pipe( pipe_slow );
13899 %}
13901 // Call runtime without safepoint
13902 instruct CallLeafDirect(method meth) %{
13903 match(CallLeaf);
13904 effect(USE meth);
13906 ins_cost(300);
13907 format %{ "CALL_LEAF,runtime " %}
13908 opcode(0xE8); /* E8 cd */
13909 ins_encode( pre_call_FPU,
13910 FFree_Float_Stack_All,
13911 Java_To_Runtime( meth ),
13912 Verify_FPU_For_Leaf, post_call_FPU );
13913 ins_pipe( pipe_slow );
13914 %}
13916 instruct CallLeafNoFPDirect(method meth) %{
13917 match(CallLeafNoFP);
13918 effect(USE meth);
13920 ins_cost(300);
13921 format %{ "CALL_LEAF_NOFP,runtime " %}
13922 opcode(0xE8); /* E8 cd */
13923 ins_encode(Java_To_Runtime(meth));
13924 ins_pipe( pipe_slow );
13925 %}
13928 // Return Instruction
13929 // Remove the return address & jump to it.
13930 instruct Ret() %{
13931 match(Return);
13932 format %{ "RET" %}
13933 opcode(0xC3);
13934 ins_encode(OpcP);
13935 ins_pipe( pipe_jmp );
13936 %}
13938 // Tail Call; Jump from runtime stub to Java code.
13939 // Also known as an 'interprocedural jump'.
13940 // Target of jump will eventually return to caller.
13941 // TailJump below removes the return address.
13942 instruct TailCalljmpInd(eRegP_no_EBP jump_target, eBXRegP method_oop) %{
13943 match(TailCall jump_target method_oop );
13944 ins_cost(300);
13945 format %{ "JMP $jump_target \t# EBX holds method oop" %}
13946 opcode(0xFF, 0x4); /* Opcode FF /4 */
13947 ins_encode( OpcP, RegOpc(jump_target) );
13948 ins_pipe( pipe_jmp );
13949 %}
13952 // Tail Jump; remove the return address; jump to target.
13953 // TailCall above leaves the return address around.
13954 instruct tailjmpInd(eRegP_no_EBP jump_target, eAXRegP ex_oop) %{
13955 match( TailJump jump_target ex_oop );
13956 ins_cost(300);
13957 format %{ "POP EDX\t# pop return address into dummy\n\t"
13958 "JMP $jump_target " %}
13959 opcode(0xFF, 0x4); /* Opcode FF /4 */
13960 ins_encode( enc_pop_rdx,
13961 OpcP, RegOpc(jump_target) );
13962 ins_pipe( pipe_jmp );
13963 %}
13965 // Create exception oop: created by stack-crawling runtime code.
13966 // Created exception is now available to this handler, and is setup
13967 // just prior to jumping to this handler. No code emitted.
13968 instruct CreateException( eAXRegP ex_oop )
13969 %{
13970 match(Set ex_oop (CreateEx));
13972 size(0);
13973 // use the following format syntax
13974 format %{ "# exception oop is in EAX; no code emitted" %}
13975 ins_encode();
13976 ins_pipe( empty );
13977 %}
13980 // Rethrow exception:
13981 // The exception oop will come in the first argument position.
13982 // Then JUMP (not call) to the rethrow stub code.
13983 instruct RethrowException()
13984 %{
13985 match(Rethrow);
13987 // use the following format syntax
13988 format %{ "JMP rethrow_stub" %}
13989 ins_encode(enc_rethrow);
13990 ins_pipe( pipe_jmp );
13991 %}
13993 // inlined locking and unlocking
13996 instruct cmpFastLock( eFlagsReg cr, eRegP object, eRegP box, eAXRegI tmp, eRegP scr) %{
13997 match( Set cr (FastLock object box) );
13998 effect( TEMP tmp, TEMP scr );
13999 ins_cost(300);
14000 format %{ "FASTLOCK $object, $box KILLS $tmp,$scr" %}
14001 ins_encode( Fast_Lock(object,box,tmp,scr) );
14002 ins_pipe( pipe_slow );
14003 %}
14005 instruct cmpFastUnlock( eFlagsReg cr, eRegP object, eAXRegP box, eRegP tmp ) %{
14006 match( Set cr (FastUnlock object box) );
14007 effect( TEMP tmp );
14008 ins_cost(300);
14009 format %{ "FASTUNLOCK $object, $box, $tmp" %}
14010 ins_encode( Fast_Unlock(object,box,tmp) );
14011 ins_pipe( pipe_slow );
14012 %}
14016 // ============================================================================
14017 // Safepoint Instruction
14018 instruct safePoint_poll(eFlagsReg cr) %{
14019 match(SafePoint);
14020 effect(KILL cr);
14022 // TODO-FIXME: we currently poll at offset 0 of the safepoint polling page.
14023 // On SPARC that might be acceptable as we can generate the address with
14024 // just a sethi, saving an or. By polling at offset 0 we can end up
14025 // putting additional pressure on the index-0 in the D$. Because of
14026 // alignment (just like the situation at hand) the lower indices tend
14027 // to see more traffic. It'd be better to change the polling address
14028 // to offset 0 of the last $line in the polling page.
14030 format %{ "TSTL #polladdr,EAX\t! Safepoint: poll for GC" %}
14031 ins_cost(125);
14032 size(6) ;
14033 ins_encode( Safepoint_Poll() );
14034 ins_pipe( ialu_reg_mem );
14035 %}
14037 //----------PEEPHOLE RULES-----------------------------------------------------
14038 // These must follow all instruction definitions as they use the names
14039 // defined in the instructions definitions.
14040 //
14041 // peepmatch ( root_instr_name [preceding_instruction]* );
14042 //
14043 // peepconstraint %{
14044 // (instruction_number.operand_name relational_op instruction_number.operand_name
14045 // [, ...] );
14046 // // instruction numbers are zero-based using left to right order in peepmatch
14047 //
14048 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) );
14049 // // provide an instruction_number.operand_name for each operand that appears
14050 // // in the replacement instruction's match rule
14051 //
14052 // ---------VM FLAGS---------------------------------------------------------
14053 //
14054 // All peephole optimizations can be turned off using -XX:-OptoPeephole
14055 //
14056 // Each peephole rule is given an identifying number starting with zero and
14057 // increasing by one in the order seen by the parser. An individual peephole
14058 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=#
14059 // on the command-line.
14060 //
14061 // ---------CURRENT LIMITATIONS----------------------------------------------
14062 //
14063 // Only match adjacent instructions in same basic block
14064 // Only equality constraints
14065 // Only constraints between operands, not (0.dest_reg == EAX_enc)
14066 // Only one replacement instruction
14067 //
14068 // ---------EXAMPLE----------------------------------------------------------
14069 //
14070 // // pertinent parts of existing instructions in architecture description
14071 // instruct movI(eRegI dst, eRegI src) %{
14072 // match(Set dst (CopyI src));
14073 // %}
14074 //
14075 // instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
14076 // match(Set dst (AddI dst src));
14077 // effect(KILL cr);
14078 // %}
14079 //
14080 // // Change (inc mov) to lea
14081 // peephole %{
14082 // // increment preceeded by register-register move
14083 // peepmatch ( incI_eReg movI );
14084 // // require that the destination register of the increment
14085 // // match the destination register of the move
14086 // peepconstraint ( 0.dst == 1.dst );
14087 // // construct a replacement instruction that sets
14088 // // the destination to ( move's source register + one )
14089 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14090 // %}
14091 //
14092 // Implementation no longer uses movX instructions since
14093 // machine-independent system no longer uses CopyX nodes.
14094 //
14095 // peephole %{
14096 // peepmatch ( incI_eReg movI );
14097 // peepconstraint ( 0.dst == 1.dst );
14098 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14099 // %}
14100 //
14101 // peephole %{
14102 // peepmatch ( decI_eReg movI );
14103 // peepconstraint ( 0.dst == 1.dst );
14104 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14105 // %}
14106 //
14107 // peephole %{
14108 // peepmatch ( addI_eReg_imm movI );
14109 // peepconstraint ( 0.dst == 1.dst );
14110 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
14111 // %}
14112 //
14113 // peephole %{
14114 // peepmatch ( addP_eReg_imm movP );
14115 // peepconstraint ( 0.dst == 1.dst );
14116 // peepreplace ( leaP_eReg_immI( 0.dst 1.src 0.src ) );
14117 // %}
14119 // // Change load of spilled value to only a spill
14120 // instruct storeI(memory mem, eRegI src) %{
14121 // match(Set mem (StoreI mem src));
14122 // %}
14123 //
14124 // instruct loadI(eRegI dst, memory mem) %{
14125 // match(Set dst (LoadI mem));
14126 // %}
14127 //
14128 peephole %{
14129 peepmatch ( loadI storeI );
14130 peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem );
14131 peepreplace ( storeI( 1.mem 1.mem 1.src ) );
14132 %}
14134 //----------SMARTSPILL RULES---------------------------------------------------
14135 // These must follow all instruction definitions as they use the names
14136 // defined in the instructions definitions.