Sat, 10 Sep 2011 00:11:04 -0700
7088020: SEGV in JNIHandleBlock::release_block
Reviewed-by: kvn, twisti
1 /*
2 * Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "interpreter/interpreter.hpp"
27 #include "interpreter/interpreterRuntime.hpp"
28 #include "memory/allocation.inline.hpp"
29 #include "prims/methodHandles.hpp"
31 #define __ _masm->
33 #ifdef PRODUCT
34 #define BLOCK_COMMENT(str) /* nothing */
35 #else
36 #define BLOCK_COMMENT(str) __ block_comment(str)
37 #endif
39 #define BIND(label) bind(label); BLOCK_COMMENT(#label ":")
41 // Workaround for C++ overloading nastiness on '0' for RegisterOrConstant.
42 static RegisterOrConstant constant(int value) {
43 return RegisterOrConstant(value);
44 }
46 address MethodHandleEntry::start_compiled_entry(MacroAssembler* _masm,
47 address interpreted_entry) {
48 // Just before the actual machine code entry point, allocate space
49 // for a MethodHandleEntry::Data record, so that we can manage everything
50 // from one base pointer.
51 __ align(wordSize);
52 address target = __ pc() + sizeof(Data);
53 while (__ pc() < target) {
54 __ nop();
55 __ align(wordSize);
56 }
58 MethodHandleEntry* me = (MethodHandleEntry*) __ pc();
59 me->set_end_address(__ pc()); // set a temporary end_address
60 me->set_from_interpreted_entry(interpreted_entry);
61 me->set_type_checking_entry(NULL);
63 return (address) me;
64 }
66 MethodHandleEntry* MethodHandleEntry::finish_compiled_entry(MacroAssembler* _masm,
67 address start_addr) {
68 MethodHandleEntry* me = (MethodHandleEntry*) start_addr;
69 assert(me->end_address() == start_addr, "valid ME");
71 // Fill in the real end_address:
72 __ align(wordSize);
73 me->set_end_address(__ pc());
75 return me;
76 }
78 // stack walking support
80 frame MethodHandles::ricochet_frame_sender(const frame& fr, RegisterMap *map) {
81 RicochetFrame* f = RicochetFrame::from_frame(fr);
82 if (map->update_map())
83 frame::update_map_with_saved_link(map, &f->_sender_link);
84 return frame(f->extended_sender_sp(), f->exact_sender_sp(), f->sender_link(), f->sender_pc());
85 }
87 void MethodHandles::ricochet_frame_oops_do(const frame& fr, OopClosure* blk, const RegisterMap* reg_map) {
88 RicochetFrame* f = RicochetFrame::from_frame(fr);
90 // pick up the argument type descriptor:
91 Thread* thread = Thread::current();
92 Handle cookie(thread, f->compute_saved_args_layout(true, true));
94 // process fixed part
95 blk->do_oop((oop*)f->saved_target_addr());
96 blk->do_oop((oop*)f->saved_args_layout_addr());
98 // process variable arguments:
99 if (cookie.is_null()) return; // no arguments to describe
101 // the cookie is actually the invokeExact method for my target
102 // his argument signature is what I'm interested in
103 assert(cookie->is_method(), "");
104 methodHandle invoker(thread, methodOop(cookie()));
105 assert(invoker->name() == vmSymbols::invokeExact_name(), "must be this kind of method");
106 assert(!invoker->is_static(), "must have MH argument");
107 int slot_count = invoker->size_of_parameters();
108 assert(slot_count >= 1, "must include 'this'");
109 intptr_t* base = f->saved_args_base();
110 intptr_t* retval = NULL;
111 if (f->has_return_value_slot())
112 retval = f->return_value_slot_addr();
113 int slot_num = slot_count;
114 intptr_t* loc = &base[slot_num -= 1];
115 //blk->do_oop((oop*) loc); // original target, which is irrelevant
116 int arg_num = 0;
117 for (SignatureStream ss(invoker->signature()); !ss.is_done(); ss.next()) {
118 if (ss.at_return_type()) continue;
119 BasicType ptype = ss.type();
120 if (ptype == T_ARRAY) ptype = T_OBJECT; // fold all refs to T_OBJECT
121 assert(ptype >= T_BOOLEAN && ptype <= T_OBJECT, "not array or void");
122 loc = &base[slot_num -= type2size[ptype]];
123 bool is_oop = (ptype == T_OBJECT && loc != retval);
124 if (is_oop) blk->do_oop((oop*)loc);
125 arg_num += 1;
126 }
127 assert(slot_num == 0, "must have processed all the arguments");
128 }
130 oop MethodHandles::RicochetFrame::compute_saved_args_layout(bool read_cache, bool write_cache) {
131 oop cookie = NULL;
132 if (read_cache) {
133 cookie = saved_args_layout();
134 if (cookie != NULL) return cookie;
135 }
136 oop target = saved_target();
137 oop mtype = java_lang_invoke_MethodHandle::type(target);
138 oop mtform = java_lang_invoke_MethodType::form(mtype);
139 cookie = java_lang_invoke_MethodTypeForm::vmlayout(mtform);
140 if (write_cache) {
141 (*saved_args_layout_addr()) = cookie;
142 }
143 return cookie;
144 }
146 void MethodHandles::RicochetFrame::generate_ricochet_blob(MacroAssembler* _masm,
147 // output params:
148 int* bounce_offset,
149 int* exception_offset,
150 int* frame_size_in_words) {
151 (*frame_size_in_words) = RicochetFrame::frame_size_in_bytes() / wordSize;
153 address start = __ pc();
155 #ifdef ASSERT
156 __ hlt(); __ hlt(); __ hlt();
157 // here's a hint of something special:
158 __ push(MAGIC_NUMBER_1);
159 __ push(MAGIC_NUMBER_2);
160 #endif //ASSERT
161 __ hlt(); // not reached
163 // A return PC has just been popped from the stack.
164 // Return values are in registers.
165 // The ebp points into the RicochetFrame, which contains
166 // a cleanup continuation we must return to.
168 (*bounce_offset) = __ pc() - start;
169 BLOCK_COMMENT("ricochet_blob.bounce");
171 if (VerifyMethodHandles) RicochetFrame::verify_clean(_masm);
172 trace_method_handle(_masm, "return/ricochet_blob.bounce");
174 __ jmp(frame_address(continuation_offset_in_bytes()));
175 __ hlt();
176 DEBUG_ONLY(__ push(MAGIC_NUMBER_2));
178 (*exception_offset) = __ pc() - start;
179 BLOCK_COMMENT("ricochet_blob.exception");
181 // compare this to Interpreter::rethrow_exception_entry, which is parallel code
182 // for example, see TemplateInterpreterGenerator::generate_throw_exception
183 // Live registers in:
184 // rax: exception
185 // rdx: return address/pc that threw exception (ignored, always equal to bounce addr)
186 __ verify_oop(rax);
188 // no need to empty_FPU_stack or reinit_heapbase, since caller frame will do the same if needed
190 // Take down the frame.
192 // Cf. InterpreterMacroAssembler::remove_activation.
193 leave_ricochet_frame(_masm, /*rcx_recv=*/ noreg,
194 saved_last_sp_register(),
195 /*sender_pc_reg=*/ rdx);
197 // In between activations - previous activation type unknown yet
198 // compute continuation point - the continuation point expects the
199 // following registers set up:
200 //
201 // rax: exception
202 // rdx: return address/pc that threw exception
203 // rsp: expression stack of caller
204 // rbp: ebp of caller
205 __ push(rax); // save exception
206 __ push(rdx); // save return address
207 Register thread_reg = LP64_ONLY(r15_thread) NOT_LP64(rdi);
208 NOT_LP64(__ get_thread(thread_reg));
209 __ call_VM_leaf(CAST_FROM_FN_PTR(address,
210 SharedRuntime::exception_handler_for_return_address),
211 thread_reg, rdx);
212 __ mov(rbx, rax); // save exception handler
213 __ pop(rdx); // restore return address
214 __ pop(rax); // restore exception
215 __ jmp(rbx); // jump to exception
216 // handler of caller
217 }
219 void MethodHandles::RicochetFrame::enter_ricochet_frame(MacroAssembler* _masm,
220 Register rcx_recv,
221 Register rax_argv,
222 address return_handler,
223 Register rbx_temp) {
224 const Register saved_last_sp = saved_last_sp_register();
225 Address rcx_mh_vmtarget( rcx_recv, java_lang_invoke_MethodHandle::vmtarget_offset_in_bytes() );
226 Address rcx_amh_conversion( rcx_recv, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes() );
228 // Push the RicochetFrame a word at a time.
229 // This creates something similar to an interpreter frame.
230 // Cf. TemplateInterpreterGenerator::generate_fixed_frame.
231 BLOCK_COMMENT("push RicochetFrame {");
232 DEBUG_ONLY(int rfo = (int) sizeof(RicochetFrame));
233 assert((rfo -= wordSize) == RicochetFrame::sender_pc_offset_in_bytes(), "");
234 #define RF_FIELD(push_value, name) \
235 { push_value; \
236 assert((rfo -= wordSize) == RicochetFrame::name##_offset_in_bytes(), ""); }
237 RF_FIELD(__ push(rbp), sender_link);
238 RF_FIELD(__ push(saved_last_sp), exact_sender_sp); // rsi/r13
239 RF_FIELD(__ pushptr(rcx_amh_conversion), conversion);
240 RF_FIELD(__ push(rax_argv), saved_args_base); // can be updated if args are shifted
241 RF_FIELD(__ push((int32_t) NULL_WORD), saved_args_layout); // cache for GC layout cookie
242 if (UseCompressedOops) {
243 __ load_heap_oop(rbx_temp, rcx_mh_vmtarget);
244 RF_FIELD(__ push(rbx_temp), saved_target);
245 } else {
246 RF_FIELD(__ pushptr(rcx_mh_vmtarget), saved_target);
247 }
248 __ lea(rbx_temp, ExternalAddress(return_handler));
249 RF_FIELD(__ push(rbx_temp), continuation);
250 #undef RF_FIELD
251 assert(rfo == 0, "fully initialized the RicochetFrame");
252 // compute new frame pointer:
253 __ lea(rbp, Address(rsp, RicochetFrame::sender_link_offset_in_bytes()));
254 // Push guard word #1 in debug mode.
255 DEBUG_ONLY(__ push((int32_t) RicochetFrame::MAGIC_NUMBER_1));
256 // For debugging, leave behind an indication of which stub built this frame.
257 DEBUG_ONLY({ Label L; __ call(L, relocInfo::none); __ bind(L); });
258 BLOCK_COMMENT("} RicochetFrame");
259 }
261 void MethodHandles::RicochetFrame::leave_ricochet_frame(MacroAssembler* _masm,
262 Register rcx_recv,
263 Register new_sp_reg,
264 Register sender_pc_reg) {
265 assert_different_registers(rcx_recv, new_sp_reg, sender_pc_reg);
266 const Register saved_last_sp = saved_last_sp_register();
267 // Take down the frame.
268 // Cf. InterpreterMacroAssembler::remove_activation.
269 BLOCK_COMMENT("end_ricochet_frame {");
270 // TO DO: If (exact_sender_sp - extended_sender_sp) > THRESH, compact the frame down.
271 // This will keep stack in bounds even with unlimited tailcalls, each with an adapter.
272 if (rcx_recv->is_valid())
273 __ movptr(rcx_recv, RicochetFrame::frame_address(RicochetFrame::saved_target_offset_in_bytes()));
274 __ movptr(sender_pc_reg, RicochetFrame::frame_address(RicochetFrame::sender_pc_offset_in_bytes()));
275 __ movptr(saved_last_sp, RicochetFrame::frame_address(RicochetFrame::exact_sender_sp_offset_in_bytes()));
276 __ movptr(rbp, RicochetFrame::frame_address(RicochetFrame::sender_link_offset_in_bytes()));
277 __ mov(rsp, new_sp_reg);
278 BLOCK_COMMENT("} end_ricochet_frame");
279 }
281 // Emit code to verify that RBP is pointing at a valid ricochet frame.
282 #ifdef ASSERT
283 enum {
284 ARG_LIMIT = 255, SLOP = 4,
285 // use this parameter for checking for garbage stack movements:
286 UNREASONABLE_STACK_MOVE = (ARG_LIMIT + SLOP)
287 // the slop defends against false alarms due to fencepost errors
288 };
290 void MethodHandles::RicochetFrame::verify_clean(MacroAssembler* _masm) {
291 // The stack should look like this:
292 // ... keep1 | dest=42 | keep2 | RF | magic | handler | magic | recursive args |
293 // Check various invariants.
294 verify_offsets();
296 Register rdi_temp = rdi;
297 Register rcx_temp = rcx;
298 { __ push(rdi_temp); __ push(rcx_temp); }
299 #define UNPUSH_TEMPS \
300 { __ pop(rcx_temp); __ pop(rdi_temp); }
302 Address magic_number_1_addr = RicochetFrame::frame_address(RicochetFrame::magic_number_1_offset_in_bytes());
303 Address magic_number_2_addr = RicochetFrame::frame_address(RicochetFrame::magic_number_2_offset_in_bytes());
304 Address continuation_addr = RicochetFrame::frame_address(RicochetFrame::continuation_offset_in_bytes());
305 Address conversion_addr = RicochetFrame::frame_address(RicochetFrame::conversion_offset_in_bytes());
306 Address saved_args_base_addr = RicochetFrame::frame_address(RicochetFrame::saved_args_base_offset_in_bytes());
308 Label L_bad, L_ok;
309 BLOCK_COMMENT("verify_clean {");
310 // Magic numbers must check out:
311 __ cmpptr(magic_number_1_addr, (int32_t) MAGIC_NUMBER_1);
312 __ jcc(Assembler::notEqual, L_bad);
313 __ cmpptr(magic_number_2_addr, (int32_t) MAGIC_NUMBER_2);
314 __ jcc(Assembler::notEqual, L_bad);
316 // Arguments pointer must look reasonable:
317 __ movptr(rcx_temp, saved_args_base_addr);
318 __ cmpptr(rcx_temp, rbp);
319 __ jcc(Assembler::below, L_bad);
320 __ subptr(rcx_temp, UNREASONABLE_STACK_MOVE * Interpreter::stackElementSize);
321 __ cmpptr(rcx_temp, rbp);
322 __ jcc(Assembler::above, L_bad);
324 load_conversion_dest_type(_masm, rdi_temp, conversion_addr);
325 __ cmpl(rdi_temp, T_VOID);
326 __ jcc(Assembler::equal, L_ok);
327 __ movptr(rcx_temp, saved_args_base_addr);
328 load_conversion_vminfo(_masm, rdi_temp, conversion_addr);
329 __ cmpptr(Address(rcx_temp, rdi_temp, Interpreter::stackElementScale()),
330 (int32_t) RETURN_VALUE_PLACEHOLDER);
331 __ jcc(Assembler::equal, L_ok);
332 __ BIND(L_bad);
333 UNPUSH_TEMPS;
334 __ stop("damaged ricochet frame");
335 __ BIND(L_ok);
336 UNPUSH_TEMPS;
337 BLOCK_COMMENT("} verify_clean");
339 #undef UNPUSH_TEMPS
341 }
342 #endif //ASSERT
344 void MethodHandles::load_klass_from_Class(MacroAssembler* _masm, Register klass_reg) {
345 if (VerifyMethodHandles)
346 verify_klass(_masm, klass_reg, SystemDictionaryHandles::Class_klass(),
347 "AMH argument is a Class");
348 __ load_heap_oop(klass_reg, Address(klass_reg, java_lang_Class::klass_offset_in_bytes()));
349 }
351 void MethodHandles::load_conversion_vminfo(MacroAssembler* _masm, Register reg, Address conversion_field_addr) {
352 int bits = BitsPerByte;
353 int offset = (CONV_VMINFO_SHIFT / bits);
354 int shift = (CONV_VMINFO_SHIFT % bits);
355 __ load_unsigned_byte(reg, conversion_field_addr.plus_disp(offset));
356 assert(CONV_VMINFO_MASK == right_n_bits(bits - shift), "else change type of previous load");
357 assert(shift == 0, "no shift needed");
358 }
360 void MethodHandles::load_conversion_dest_type(MacroAssembler* _masm, Register reg, Address conversion_field_addr) {
361 int bits = BitsPerByte;
362 int offset = (CONV_DEST_TYPE_SHIFT / bits);
363 int shift = (CONV_DEST_TYPE_SHIFT % bits);
364 __ load_unsigned_byte(reg, conversion_field_addr.plus_disp(offset));
365 assert(CONV_TYPE_MASK == right_n_bits(bits - shift), "else change type of previous load");
366 __ shrl(reg, shift);
367 DEBUG_ONLY(int conv_type_bits = (int) exact_log2(CONV_TYPE_MASK+1));
368 assert((shift + conv_type_bits) == bits, "left justified in byte");
369 }
371 void MethodHandles::load_stack_move(MacroAssembler* _masm,
372 Register rdi_stack_move,
373 Register rcx_amh,
374 bool might_be_negative) {
375 BLOCK_COMMENT("load_stack_move {");
376 Address rcx_amh_conversion(rcx_amh, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes());
377 __ movl(rdi_stack_move, rcx_amh_conversion);
378 __ sarl(rdi_stack_move, CONV_STACK_MOVE_SHIFT);
379 #ifdef _LP64
380 if (might_be_negative) {
381 // clean high bits of stack motion register (was loaded as an int)
382 __ movslq(rdi_stack_move, rdi_stack_move);
383 }
384 #endif //_LP64
385 if (VerifyMethodHandles) {
386 Label L_ok, L_bad;
387 int32_t stack_move_limit = 0x4000; // extra-large
388 __ cmpptr(rdi_stack_move, stack_move_limit);
389 __ jcc(Assembler::greaterEqual, L_bad);
390 __ cmpptr(rdi_stack_move, -stack_move_limit);
391 __ jcc(Assembler::greater, L_ok);
392 __ bind(L_bad);
393 __ stop("load_stack_move of garbage value");
394 __ BIND(L_ok);
395 }
396 BLOCK_COMMENT("} load_stack_move");
397 }
399 #ifdef ASSERT
400 void MethodHandles::RicochetFrame::verify_offsets() {
401 // Check compatibility of this struct with the more generally used offsets of class frame:
402 int ebp_off = sender_link_offset_in_bytes(); // offset from struct base to local rbp value
403 assert(ebp_off + wordSize*frame::interpreter_frame_method_offset == saved_args_base_offset_in_bytes(), "");
404 assert(ebp_off + wordSize*frame::interpreter_frame_last_sp_offset == conversion_offset_in_bytes(), "");
405 assert(ebp_off + wordSize*frame::interpreter_frame_sender_sp_offset == exact_sender_sp_offset_in_bytes(), "");
406 // These last two have to be exact:
407 assert(ebp_off + wordSize*frame::link_offset == sender_link_offset_in_bytes(), "");
408 assert(ebp_off + wordSize*frame::return_addr_offset == sender_pc_offset_in_bytes(), "");
409 }
411 void MethodHandles::RicochetFrame::verify() const {
412 verify_offsets();
413 assert(magic_number_1() == MAGIC_NUMBER_1, "");
414 assert(magic_number_2() == MAGIC_NUMBER_2, "");
415 if (!Universe::heap()->is_gc_active()) {
416 if (saved_args_layout() != NULL) {
417 assert(saved_args_layout()->is_method(), "must be valid oop");
418 }
419 if (saved_target() != NULL) {
420 assert(java_lang_invoke_MethodHandle::is_instance(saved_target()), "checking frame value");
421 }
422 }
423 int conv_op = adapter_conversion_op(conversion());
424 assert(conv_op == java_lang_invoke_AdapterMethodHandle::OP_COLLECT_ARGS ||
425 conv_op == java_lang_invoke_AdapterMethodHandle::OP_FOLD_ARGS ||
426 conv_op == java_lang_invoke_AdapterMethodHandle::OP_PRIM_TO_REF,
427 "must be a sane conversion");
428 if (has_return_value_slot()) {
429 assert(*return_value_slot_addr() == RETURN_VALUE_PLACEHOLDER, "");
430 }
431 }
432 #endif //PRODUCT
434 #ifdef ASSERT
435 void MethodHandles::verify_argslot(MacroAssembler* _masm,
436 Register argslot_reg,
437 const char* error_message) {
438 // Verify that argslot lies within (rsp, rbp].
439 Label L_ok, L_bad;
440 BLOCK_COMMENT("verify_argslot {");
441 __ cmpptr(argslot_reg, rbp);
442 __ jccb(Assembler::above, L_bad);
443 __ cmpptr(rsp, argslot_reg);
444 __ jccb(Assembler::below, L_ok);
445 __ bind(L_bad);
446 __ stop(error_message);
447 __ BIND(L_ok);
448 BLOCK_COMMENT("} verify_argslot");
449 }
451 void MethodHandles::verify_argslots(MacroAssembler* _masm,
452 RegisterOrConstant arg_slots,
453 Register arg_slot_base_reg,
454 bool negate_argslots,
455 const char* error_message) {
456 // Verify that [argslot..argslot+size) lies within (rsp, rbp).
457 Label L_ok, L_bad;
458 Register rdi_temp = rdi;
459 BLOCK_COMMENT("verify_argslots {");
460 __ push(rdi_temp);
461 if (negate_argslots) {
462 if (arg_slots.is_constant()) {
463 arg_slots = -1 * arg_slots.as_constant();
464 } else {
465 __ movptr(rdi_temp, arg_slots);
466 __ negptr(rdi_temp);
467 arg_slots = rdi_temp;
468 }
469 }
470 __ lea(rdi_temp, Address(arg_slot_base_reg, arg_slots, Interpreter::stackElementScale()));
471 __ cmpptr(rdi_temp, rbp);
472 __ pop(rdi_temp);
473 __ jcc(Assembler::above, L_bad);
474 __ cmpptr(rsp, arg_slot_base_reg);
475 __ jcc(Assembler::below, L_ok);
476 __ bind(L_bad);
477 __ stop(error_message);
478 __ BIND(L_ok);
479 BLOCK_COMMENT("} verify_argslots");
480 }
482 // Make sure that arg_slots has the same sign as the given direction.
483 // If (and only if) arg_slots is a assembly-time constant, also allow it to be zero.
484 void MethodHandles::verify_stack_move(MacroAssembler* _masm,
485 RegisterOrConstant arg_slots, int direction) {
486 bool allow_zero = arg_slots.is_constant();
487 if (direction == 0) { direction = +1; allow_zero = true; }
488 assert(stack_move_unit() == -1, "else add extra checks here");
489 if (arg_slots.is_register()) {
490 Label L_ok, L_bad;
491 BLOCK_COMMENT("verify_stack_move {");
492 // testl(arg_slots.as_register(), -stack_move_unit() - 1); // no need
493 // jcc(Assembler::notZero, L_bad);
494 __ cmpptr(arg_slots.as_register(), (int32_t) NULL_WORD);
495 if (direction > 0) {
496 __ jcc(allow_zero ? Assembler::less : Assembler::lessEqual, L_bad);
497 __ cmpptr(arg_slots.as_register(), (int32_t) UNREASONABLE_STACK_MOVE);
498 __ jcc(Assembler::less, L_ok);
499 } else {
500 __ jcc(allow_zero ? Assembler::greater : Assembler::greaterEqual, L_bad);
501 __ cmpptr(arg_slots.as_register(), (int32_t) -UNREASONABLE_STACK_MOVE);
502 __ jcc(Assembler::greater, L_ok);
503 }
504 __ bind(L_bad);
505 if (direction > 0)
506 __ stop("assert arg_slots > 0");
507 else
508 __ stop("assert arg_slots < 0");
509 __ BIND(L_ok);
510 BLOCK_COMMENT("} verify_stack_move");
511 } else {
512 intptr_t size = arg_slots.as_constant();
513 if (direction < 0) size = -size;
514 assert(size >= 0, "correct direction of constant move");
515 assert(size < UNREASONABLE_STACK_MOVE, "reasonable size of constant move");
516 }
517 }
519 void MethodHandles::verify_klass(MacroAssembler* _masm,
520 Register obj, KlassHandle klass,
521 const char* error_message) {
522 oop* klass_addr = klass.raw_value();
523 assert(klass_addr >= SystemDictionaryHandles::Object_klass().raw_value() &&
524 klass_addr <= SystemDictionaryHandles::Long_klass().raw_value(),
525 "must be one of the SystemDictionaryHandles");
526 Register temp = rdi;
527 Label L_ok, L_bad;
528 BLOCK_COMMENT("verify_klass {");
529 __ verify_oop(obj);
530 __ testptr(obj, obj);
531 __ jcc(Assembler::zero, L_bad);
532 __ push(temp);
533 __ load_klass(temp, obj);
534 __ cmpptr(temp, ExternalAddress((address) klass_addr));
535 __ jcc(Assembler::equal, L_ok);
536 intptr_t super_check_offset = klass->super_check_offset();
537 __ movptr(temp, Address(temp, super_check_offset));
538 __ cmpptr(temp, ExternalAddress((address) klass_addr));
539 __ jcc(Assembler::equal, L_ok);
540 __ pop(temp);
541 __ bind(L_bad);
542 __ stop(error_message);
543 __ BIND(L_ok);
544 __ pop(temp);
545 BLOCK_COMMENT("} verify_klass");
546 }
547 #endif //ASSERT
549 void MethodHandles::jump_from_method_handle(MacroAssembler* _masm, Register method, Register temp) {
550 if (JvmtiExport::can_post_interpreter_events()) {
551 Label run_compiled_code;
552 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
553 // compiled code in threads for which the event is enabled. Check here for
554 // interp_only_mode if these events CAN be enabled.
555 #ifdef _LP64
556 Register rthread = r15_thread;
557 #else
558 Register rthread = temp;
559 __ get_thread(rthread);
560 #endif
561 // interp_only is an int, on little endian it is sufficient to test the byte only
562 // Is a cmpl faster?
563 __ cmpb(Address(rthread, JavaThread::interp_only_mode_offset()), 0);
564 __ jccb(Assembler::zero, run_compiled_code);
565 __ jmp(Address(method, methodOopDesc::interpreter_entry_offset()));
566 __ bind(run_compiled_code);
567 }
568 __ jmp(Address(method, methodOopDesc::from_interpreted_offset()));
569 }
571 // Code generation
572 address MethodHandles::generate_method_handle_interpreter_entry(MacroAssembler* _masm) {
573 // rbx: methodOop
574 // rcx: receiver method handle (must load from sp[MethodTypeForm.vmslots])
575 // rsi/r13: sender SP (must preserve; see prepare_to_jump_from_interpreted)
576 // rdx, rdi: garbage temp, blown away
578 Register rbx_method = rbx;
579 Register rcx_recv = rcx;
580 Register rax_mtype = rax;
581 Register rdx_temp = rdx;
582 Register rdi_temp = rdi;
584 // emit WrongMethodType path first, to enable jccb back-branch from main path
585 Label wrong_method_type;
586 __ bind(wrong_method_type);
587 Label invoke_generic_slow_path, invoke_exact_error_path;
588 assert(methodOopDesc::intrinsic_id_size_in_bytes() == sizeof(u1), "");;
589 __ cmpb(Address(rbx_method, methodOopDesc::intrinsic_id_offset_in_bytes()), (int) vmIntrinsics::_invokeExact);
590 __ jcc(Assembler::notEqual, invoke_generic_slow_path);
591 __ jmp(invoke_exact_error_path);
593 // here's where control starts out:
594 __ align(CodeEntryAlignment);
595 address entry_point = __ pc();
597 // fetch the MethodType from the method handle into rax (the 'check' register)
598 // FIXME: Interpreter should transmit pre-popped stack pointer, to locate base of arg list.
599 // This would simplify several touchy bits of code.
600 // See 6984712: JSR 292 method handle calls need a clean argument base pointer
601 {
602 Register tem = rbx_method;
603 for (jint* pchase = methodOopDesc::method_type_offsets_chain(); (*pchase) != -1; pchase++) {
604 __ movptr(rax_mtype, Address(tem, *pchase));
605 tem = rax_mtype; // in case there is another indirection
606 }
607 }
609 // given the MethodType, find out where the MH argument is buried
610 __ load_heap_oop(rdx_temp, Address(rax_mtype, __ delayed_value(java_lang_invoke_MethodType::form_offset_in_bytes, rdi_temp)));
611 Register rdx_vmslots = rdx_temp;
612 __ movl(rdx_vmslots, Address(rdx_temp, __ delayed_value(java_lang_invoke_MethodTypeForm::vmslots_offset_in_bytes, rdi_temp)));
613 Address mh_receiver_slot_addr = __ argument_address(rdx_vmslots);
614 __ movptr(rcx_recv, mh_receiver_slot_addr);
616 trace_method_handle(_masm, "invokeExact");
618 __ check_method_handle_type(rax_mtype, rcx_recv, rdi_temp, wrong_method_type);
620 // Nobody uses the MH receiver slot after this. Make sure.
621 DEBUG_ONLY(__ movptr(mh_receiver_slot_addr, (int32_t)0x999999));
623 __ jump_to_method_handle_entry(rcx_recv, rdi_temp);
625 // error path for invokeExact (only)
626 __ bind(invoke_exact_error_path);
627 // ensure that the top of stack is properly aligned.
628 __ mov(rdi, rsp);
629 __ andptr(rsp, -StackAlignmentInBytes); // Align the stack for the ABI
630 __ pushptr(Address(rdi, 0)); // Pick up the return address
632 // Stub wants expected type in rax and the actual type in rcx
633 __ jump(ExternalAddress(StubRoutines::throw_WrongMethodTypeException_entry()));
635 // for invokeGeneric (only), apply argument and result conversions on the fly
636 __ bind(invoke_generic_slow_path);
637 #ifdef ASSERT
638 if (VerifyMethodHandles) {
639 Label L;
640 __ cmpb(Address(rbx_method, methodOopDesc::intrinsic_id_offset_in_bytes()), (int) vmIntrinsics::_invokeGeneric);
641 __ jcc(Assembler::equal, L);
642 __ stop("bad methodOop::intrinsic_id");
643 __ bind(L);
644 }
645 #endif //ASSERT
646 Register rbx_temp = rbx_method; // don't need it now
648 // make room on the stack for another pointer:
649 Register rcx_argslot = rcx_recv;
650 __ lea(rcx_argslot, __ argument_address(rdx_vmslots, 1));
651 insert_arg_slots(_masm, 2 * stack_move_unit(),
652 rcx_argslot, rbx_temp, rdx_temp);
654 // load up an adapter from the calling type (Java weaves this)
655 Register rdx_adapter = rdx_temp;
656 __ load_heap_oop(rdx_temp, Address(rax_mtype, __ delayed_value(java_lang_invoke_MethodType::form_offset_in_bytes, rdi_temp)));
657 __ load_heap_oop(rdx_adapter, Address(rdx_temp, __ delayed_value(java_lang_invoke_MethodTypeForm::genericInvoker_offset_in_bytes, rdi_temp)));
658 __ verify_oop(rdx_adapter);
659 __ movptr(Address(rcx_argslot, 1 * Interpreter::stackElementSize), rdx_adapter);
660 // As a trusted first argument, pass the type being called, so the adapter knows
661 // the actual types of the arguments and return values.
662 // (Generic invokers are shared among form-families of method-type.)
663 __ movptr(Address(rcx_argslot, 0 * Interpreter::stackElementSize), rax_mtype);
664 // FIXME: assert that rdx_adapter is of the right method-type.
665 __ mov(rcx, rdx_adapter);
666 trace_method_handle(_masm, "invokeGeneric");
667 __ jump_to_method_handle_entry(rcx, rdi_temp);
669 return entry_point;
670 }
672 // Helper to insert argument slots into the stack.
673 // arg_slots must be a multiple of stack_move_unit() and < 0
674 // rax_argslot is decremented to point to the new (shifted) location of the argslot
675 // But, rdx_temp ends up holding the original value of rax_argslot.
676 void MethodHandles::insert_arg_slots(MacroAssembler* _masm,
677 RegisterOrConstant arg_slots,
678 Register rax_argslot,
679 Register rbx_temp, Register rdx_temp) {
680 // allow constant zero
681 if (arg_slots.is_constant() && arg_slots.as_constant() == 0)
682 return;
683 assert_different_registers(rax_argslot, rbx_temp, rdx_temp,
684 (!arg_slots.is_register() ? rsp : arg_slots.as_register()));
685 if (VerifyMethodHandles)
686 verify_argslot(_masm, rax_argslot, "insertion point must fall within current frame");
687 if (VerifyMethodHandles)
688 verify_stack_move(_masm, arg_slots, -1);
690 // Make space on the stack for the inserted argument(s).
691 // Then pull down everything shallower than rax_argslot.
692 // The stacked return address gets pulled down with everything else.
693 // That is, copy [rsp, argslot) downward by -size words. In pseudo-code:
694 // rsp -= size;
695 // for (rdx = rsp + size; rdx < argslot; rdx++)
696 // rdx[-size] = rdx[0]
697 // argslot -= size;
698 BLOCK_COMMENT("insert_arg_slots {");
699 __ mov(rdx_temp, rsp); // source pointer for copy
700 __ lea(rsp, Address(rsp, arg_slots, Interpreter::stackElementScale()));
701 {
702 Label loop;
703 __ BIND(loop);
704 // pull one word down each time through the loop
705 __ movptr(rbx_temp, Address(rdx_temp, 0));
706 __ movptr(Address(rdx_temp, arg_slots, Interpreter::stackElementScale()), rbx_temp);
707 __ addptr(rdx_temp, wordSize);
708 __ cmpptr(rdx_temp, rax_argslot);
709 __ jcc(Assembler::below, loop);
710 }
712 // Now move the argslot down, to point to the opened-up space.
713 __ lea(rax_argslot, Address(rax_argslot, arg_slots, Interpreter::stackElementScale()));
714 BLOCK_COMMENT("} insert_arg_slots");
715 }
717 // Helper to remove argument slots from the stack.
718 // arg_slots must be a multiple of stack_move_unit() and > 0
719 void MethodHandles::remove_arg_slots(MacroAssembler* _masm,
720 RegisterOrConstant arg_slots,
721 Register rax_argslot,
722 Register rbx_temp, Register rdx_temp) {
723 // allow constant zero
724 if (arg_slots.is_constant() && arg_slots.as_constant() == 0)
725 return;
726 assert_different_registers(rax_argslot, rbx_temp, rdx_temp,
727 (!arg_slots.is_register() ? rsp : arg_slots.as_register()));
728 if (VerifyMethodHandles)
729 verify_argslots(_masm, arg_slots, rax_argslot, false,
730 "deleted argument(s) must fall within current frame");
731 if (VerifyMethodHandles)
732 verify_stack_move(_masm, arg_slots, +1);
734 BLOCK_COMMENT("remove_arg_slots {");
735 // Pull up everything shallower than rax_argslot.
736 // Then remove the excess space on the stack.
737 // The stacked return address gets pulled up with everything else.
738 // That is, copy [rsp, argslot) upward by size words. In pseudo-code:
739 // for (rdx = argslot-1; rdx >= rsp; --rdx)
740 // rdx[size] = rdx[0]
741 // argslot += size;
742 // rsp += size;
743 __ lea(rdx_temp, Address(rax_argslot, -wordSize)); // source pointer for copy
744 {
745 Label loop;
746 __ BIND(loop);
747 // pull one word up each time through the loop
748 __ movptr(rbx_temp, Address(rdx_temp, 0));
749 __ movptr(Address(rdx_temp, arg_slots, Interpreter::stackElementScale()), rbx_temp);
750 __ addptr(rdx_temp, -wordSize);
751 __ cmpptr(rdx_temp, rsp);
752 __ jcc(Assembler::aboveEqual, loop);
753 }
755 // Now move the argslot up, to point to the just-copied block.
756 __ lea(rsp, Address(rsp, arg_slots, Interpreter::stackElementScale()));
757 // And adjust the argslot address to point at the deletion point.
758 __ lea(rax_argslot, Address(rax_argslot, arg_slots, Interpreter::stackElementScale()));
759 BLOCK_COMMENT("} remove_arg_slots");
760 }
762 // Helper to copy argument slots to the top of the stack.
763 // The sequence starts with rax_argslot and is counted by slot_count
764 // slot_count must be a multiple of stack_move_unit() and >= 0
765 // This function blows the temps but does not change rax_argslot.
766 void MethodHandles::push_arg_slots(MacroAssembler* _masm,
767 Register rax_argslot,
768 RegisterOrConstant slot_count,
769 int skip_words_count,
770 Register rbx_temp, Register rdx_temp) {
771 assert_different_registers(rax_argslot, rbx_temp, rdx_temp,
772 (!slot_count.is_register() ? rbp : slot_count.as_register()),
773 rsp);
774 assert(Interpreter::stackElementSize == wordSize, "else change this code");
776 if (VerifyMethodHandles)
777 verify_stack_move(_masm, slot_count, 0);
779 // allow constant zero
780 if (slot_count.is_constant() && slot_count.as_constant() == 0)
781 return;
783 BLOCK_COMMENT("push_arg_slots {");
785 Register rbx_top = rbx_temp;
787 // There is at most 1 word to carry down with the TOS.
788 switch (skip_words_count) {
789 case 1: __ pop(rdx_temp); break;
790 case 0: break;
791 default: ShouldNotReachHere();
792 }
794 if (slot_count.is_constant()) {
795 for (int i = slot_count.as_constant() - 1; i >= 0; i--) {
796 __ pushptr(Address(rax_argslot, i * wordSize));
797 }
798 } else {
799 Label L_plural, L_loop, L_break;
800 // Emit code to dynamically check for the common cases, zero and one slot.
801 __ cmpl(slot_count.as_register(), (int32_t) 1);
802 __ jccb(Assembler::greater, L_plural);
803 __ jccb(Assembler::less, L_break);
804 __ pushptr(Address(rax_argslot, 0));
805 __ jmpb(L_break);
806 __ BIND(L_plural);
808 // Loop for 2 or more:
809 // rbx = &rax[slot_count]
810 // while (rbx > rax) *(--rsp) = *(--rbx)
811 __ lea(rbx_top, Address(rax_argslot, slot_count, Address::times_ptr));
812 __ BIND(L_loop);
813 __ subptr(rbx_top, wordSize);
814 __ pushptr(Address(rbx_top, 0));
815 __ cmpptr(rbx_top, rax_argslot);
816 __ jcc(Assembler::above, L_loop);
817 __ bind(L_break);
818 }
819 switch (skip_words_count) {
820 case 1: __ push(rdx_temp); break;
821 case 0: break;
822 default: ShouldNotReachHere();
823 }
824 BLOCK_COMMENT("} push_arg_slots");
825 }
827 // in-place movement; no change to rsp
828 // blows rax_temp, rdx_temp
829 void MethodHandles::move_arg_slots_up(MacroAssembler* _masm,
830 Register rbx_bottom, // invariant
831 Address top_addr, // can use rax_temp
832 RegisterOrConstant positive_distance_in_slots,
833 Register rax_temp, Register rdx_temp) {
834 BLOCK_COMMENT("move_arg_slots_up {");
835 assert_different_registers(rbx_bottom,
836 rax_temp, rdx_temp,
837 positive_distance_in_slots.register_or_noreg());
838 Label L_loop, L_break;
839 Register rax_top = rax_temp;
840 if (!top_addr.is_same_address(Address(rax_top, 0)))
841 __ lea(rax_top, top_addr);
842 // Detect empty (or broken) loop:
843 #ifdef ASSERT
844 if (VerifyMethodHandles) {
845 // Verify that &bottom < &top (non-empty interval)
846 Label L_ok, L_bad;
847 if (positive_distance_in_slots.is_register()) {
848 __ cmpptr(positive_distance_in_slots.as_register(), (int32_t) 0);
849 __ jcc(Assembler::lessEqual, L_bad);
850 }
851 __ cmpptr(rbx_bottom, rax_top);
852 __ jcc(Assembler::below, L_ok);
853 __ bind(L_bad);
854 __ stop("valid bounds (copy up)");
855 __ BIND(L_ok);
856 }
857 #endif
858 __ cmpptr(rbx_bottom, rax_top);
859 __ jccb(Assembler::aboveEqual, L_break);
860 // work rax down to rbx, copying contiguous data upwards
861 // In pseudo-code:
862 // [rbx, rax) = &[bottom, top)
863 // while (--rax >= rbx) *(rax + distance) = *(rax + 0), rax--;
864 __ BIND(L_loop);
865 __ subptr(rax_top, wordSize);
866 __ movptr(rdx_temp, Address(rax_top, 0));
867 __ movptr( Address(rax_top, positive_distance_in_slots, Address::times_ptr), rdx_temp);
868 __ cmpptr(rax_top, rbx_bottom);
869 __ jcc(Assembler::above, L_loop);
870 assert(Interpreter::stackElementSize == wordSize, "else change loop");
871 __ bind(L_break);
872 BLOCK_COMMENT("} move_arg_slots_up");
873 }
875 // in-place movement; no change to rsp
876 // blows rax_temp, rdx_temp
877 void MethodHandles::move_arg_slots_down(MacroAssembler* _masm,
878 Address bottom_addr, // can use rax_temp
879 Register rbx_top, // invariant
880 RegisterOrConstant negative_distance_in_slots,
881 Register rax_temp, Register rdx_temp) {
882 BLOCK_COMMENT("move_arg_slots_down {");
883 assert_different_registers(rbx_top,
884 negative_distance_in_slots.register_or_noreg(),
885 rax_temp, rdx_temp);
886 Label L_loop, L_break;
887 Register rax_bottom = rax_temp;
888 if (!bottom_addr.is_same_address(Address(rax_bottom, 0)))
889 __ lea(rax_bottom, bottom_addr);
890 // Detect empty (or broken) loop:
891 #ifdef ASSERT
892 assert(!negative_distance_in_slots.is_constant() || negative_distance_in_slots.as_constant() < 0, "");
893 if (VerifyMethodHandles) {
894 // Verify that &bottom < &top (non-empty interval)
895 Label L_ok, L_bad;
896 if (negative_distance_in_slots.is_register()) {
897 __ cmpptr(negative_distance_in_slots.as_register(), (int32_t) 0);
898 __ jcc(Assembler::greaterEqual, L_bad);
899 }
900 __ cmpptr(rax_bottom, rbx_top);
901 __ jcc(Assembler::below, L_ok);
902 __ bind(L_bad);
903 __ stop("valid bounds (copy down)");
904 __ BIND(L_ok);
905 }
906 #endif
907 __ cmpptr(rax_bottom, rbx_top);
908 __ jccb(Assembler::aboveEqual, L_break);
909 // work rax up to rbx, copying contiguous data downwards
910 // In pseudo-code:
911 // [rax, rbx) = &[bottom, top)
912 // while (rax < rbx) *(rax - distance) = *(rax + 0), rax++;
913 __ BIND(L_loop);
914 __ movptr(rdx_temp, Address(rax_bottom, 0));
915 __ movptr( Address(rax_bottom, negative_distance_in_slots, Address::times_ptr), rdx_temp);
916 __ addptr(rax_bottom, wordSize);
917 __ cmpptr(rax_bottom, rbx_top);
918 __ jcc(Assembler::below, L_loop);
919 assert(Interpreter::stackElementSize == wordSize, "else change loop");
920 __ bind(L_break);
921 BLOCK_COMMENT("} move_arg_slots_down");
922 }
924 // Copy from a field or array element to a stacked argument slot.
925 // is_element (ignored) says whether caller is loading an array element instead of an instance field.
926 void MethodHandles::move_typed_arg(MacroAssembler* _masm,
927 BasicType type, bool is_element,
928 Address slot_dest, Address value_src,
929 Register rbx_temp, Register rdx_temp) {
930 BLOCK_COMMENT(!is_element ? "move_typed_arg {" : "move_typed_arg { (array element)");
931 if (type == T_OBJECT || type == T_ARRAY) {
932 __ load_heap_oop(rbx_temp, value_src);
933 __ movptr(slot_dest, rbx_temp);
934 } else if (type != T_VOID) {
935 int arg_size = type2aelembytes(type);
936 bool arg_is_signed = is_signed_subword_type(type);
937 int slot_size = (arg_size > wordSize) ? arg_size : wordSize;
938 __ load_sized_value( rdx_temp, value_src, arg_size, arg_is_signed, rbx_temp);
939 __ store_sized_value( slot_dest, rdx_temp, slot_size, rbx_temp);
940 }
941 BLOCK_COMMENT("} move_typed_arg");
942 }
944 void MethodHandles::move_return_value(MacroAssembler* _masm, BasicType type,
945 Address return_slot) {
946 BLOCK_COMMENT("move_return_value {");
947 // Old versions of the JVM must clean the FPU stack after every return.
948 #ifndef _LP64
949 #ifdef COMPILER2
950 // The FPU stack is clean if UseSSE >= 2 but must be cleaned in other cases
951 if ((type == T_FLOAT && UseSSE < 1) || (type == T_DOUBLE && UseSSE < 2)) {
952 for (int i = 1; i < 8; i++) {
953 __ ffree(i);
954 }
955 } else if (UseSSE < 2) {
956 __ empty_FPU_stack();
957 }
958 #endif //COMPILER2
959 #endif //!_LP64
961 // Look at the type and pull the value out of the corresponding register.
962 if (type == T_VOID) {
963 // nothing to do
964 } else if (type == T_OBJECT) {
965 __ movptr(return_slot, rax);
966 } else if (type == T_INT || is_subword_type(type)) {
967 // write the whole word, even if only 32 bits is significant
968 __ movptr(return_slot, rax);
969 } else if (type == T_LONG) {
970 // store the value by parts
971 // Note: We assume longs are continguous (if misaligned) on the interpreter stack.
972 __ store_sized_value(return_slot, rax, BytesPerLong, rdx);
973 } else if (NOT_LP64((type == T_FLOAT && UseSSE < 1) ||
974 (type == T_DOUBLE && UseSSE < 2) ||)
975 false) {
976 // Use old x86 FPU registers:
977 if (type == T_FLOAT)
978 __ fstp_s(return_slot);
979 else
980 __ fstp_d(return_slot);
981 } else if (type == T_FLOAT) {
982 __ movflt(return_slot, xmm0);
983 } else if (type == T_DOUBLE) {
984 __ movdbl(return_slot, xmm0);
985 } else {
986 ShouldNotReachHere();
987 }
988 BLOCK_COMMENT("} move_return_value");
989 }
992 #ifndef PRODUCT
993 extern "C" void print_method_handle(oop mh);
994 void trace_method_handle_stub(const char* adaptername,
995 oop mh,
996 intptr_t* saved_regs,
997 intptr_t* entry_sp,
998 intptr_t* saved_sp,
999 intptr_t* saved_bp) {
1000 // called as a leaf from native code: do not block the JVM!
1001 bool has_mh = (strstr(adaptername, "return/") == NULL); // return adapters don't have rcx_mh
1002 intptr_t* last_sp = (intptr_t*) saved_bp[frame::interpreter_frame_last_sp_offset];
1003 intptr_t* base_sp = last_sp;
1004 typedef MethodHandles::RicochetFrame RicochetFrame;
1005 RicochetFrame* rfp = (RicochetFrame*)((address)saved_bp - RicochetFrame::sender_link_offset_in_bytes());
1006 if (!UseRicochetFrames || Universe::heap()->is_in((address) rfp->saved_args_base())) {
1007 // Probably an interpreter frame.
1008 base_sp = (intptr_t*) saved_bp[frame::interpreter_frame_monitor_block_top_offset];
1009 }
1010 intptr_t mh_reg = (intptr_t)mh;
1011 const char* mh_reg_name = "rcx_mh";
1012 if (!has_mh) mh_reg_name = "rcx";
1013 tty->print_cr("MH %s %s="PTR_FORMAT" sp=("PTR_FORMAT"+"INTX_FORMAT") stack_size="INTX_FORMAT" bp="PTR_FORMAT,
1014 adaptername, mh_reg_name, mh_reg,
1015 (intptr_t)entry_sp, (intptr_t)(saved_sp - entry_sp), (intptr_t)(base_sp - last_sp), (intptr_t)saved_bp);
1016 if (Verbose) {
1017 tty->print(" reg dump: ");
1018 int saved_regs_count = (entry_sp-1) - saved_regs;
1019 // 32 bit: rdi rsi rbp rsp; rbx rdx rcx (*) rax
1020 int i;
1021 for (i = 0; i <= saved_regs_count; i++) {
1022 if (i > 0 && i % 4 == 0 && i != saved_regs_count) {
1023 tty->cr();
1024 tty->print(" + dump: ");
1025 }
1026 tty->print(" %d: "PTR_FORMAT, i, saved_regs[i]);
1027 }
1028 tty->cr();
1029 if (last_sp != saved_sp && last_sp != NULL)
1030 tty->print_cr("*** last_sp="PTR_FORMAT, (intptr_t)last_sp);
1031 int stack_dump_count = 16;
1032 if (stack_dump_count < (int)(saved_bp + 2 - saved_sp))
1033 stack_dump_count = (int)(saved_bp + 2 - saved_sp);
1034 if (stack_dump_count > 64) stack_dump_count = 48;
1035 for (i = 0; i < stack_dump_count; i += 4) {
1036 tty->print_cr(" dump at SP[%d] "PTR_FORMAT": "PTR_FORMAT" "PTR_FORMAT" "PTR_FORMAT" "PTR_FORMAT,
1037 i, (intptr_t) &entry_sp[i+0], entry_sp[i+0], entry_sp[i+1], entry_sp[i+2], entry_sp[i+3]);
1038 }
1039 if (has_mh)
1040 print_method_handle(mh);
1041 }
1042 }
1044 // The stub wraps the arguments in a struct on the stack to avoid
1045 // dealing with the different calling conventions for passing 6
1046 // arguments.
1047 struct MethodHandleStubArguments {
1048 const char* adaptername;
1049 oopDesc* mh;
1050 intptr_t* saved_regs;
1051 intptr_t* entry_sp;
1052 intptr_t* saved_sp;
1053 intptr_t* saved_bp;
1054 };
1055 void trace_method_handle_stub_wrapper(MethodHandleStubArguments* args) {
1056 trace_method_handle_stub(args->adaptername,
1057 args->mh,
1058 args->saved_regs,
1059 args->entry_sp,
1060 args->saved_sp,
1061 args->saved_bp);
1062 }
1064 void MethodHandles::trace_method_handle(MacroAssembler* _masm, const char* adaptername) {
1065 if (!TraceMethodHandles) return;
1066 BLOCK_COMMENT("trace_method_handle {");
1067 __ push(rax);
1068 __ lea(rax, Address(rsp, wordSize * NOT_LP64(6) LP64_ONLY(14))); // entry_sp __ pusha();
1069 __ pusha();
1070 __ mov(rbx, rsp);
1071 __ enter();
1072 // incoming state:
1073 // rcx: method handle
1074 // r13 or rsi: saved sp
1075 // To avoid calling convention issues, build a record on the stack and pass the pointer to that instead.
1076 __ push(rbp); // saved_bp
1077 __ push(rsi); // saved_sp
1078 __ push(rax); // entry_sp
1079 __ push(rbx); // pusha saved_regs
1080 __ push(rcx); // mh
1081 __ push(rcx); // adaptername
1082 __ movptr(Address(rsp, 0), (intptr_t) adaptername);
1083 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, trace_method_handle_stub_wrapper), rsp);
1084 __ leave();
1085 __ popa();
1086 __ pop(rax);
1087 BLOCK_COMMENT("} trace_method_handle");
1088 }
1089 #endif //PRODUCT
1091 // which conversion op types are implemented here?
1092 int MethodHandles::adapter_conversion_ops_supported_mask() {
1093 return ((1<<java_lang_invoke_AdapterMethodHandle::OP_RETYPE_ONLY)
1094 |(1<<java_lang_invoke_AdapterMethodHandle::OP_RETYPE_RAW)
1095 |(1<<java_lang_invoke_AdapterMethodHandle::OP_CHECK_CAST)
1096 |(1<<java_lang_invoke_AdapterMethodHandle::OP_PRIM_TO_PRIM)
1097 |(1<<java_lang_invoke_AdapterMethodHandle::OP_REF_TO_PRIM)
1098 //OP_PRIM_TO_REF is below...
1099 |(1<<java_lang_invoke_AdapterMethodHandle::OP_SWAP_ARGS)
1100 |(1<<java_lang_invoke_AdapterMethodHandle::OP_ROT_ARGS)
1101 |(1<<java_lang_invoke_AdapterMethodHandle::OP_DUP_ARGS)
1102 |(1<<java_lang_invoke_AdapterMethodHandle::OP_DROP_ARGS)
1103 //OP_COLLECT_ARGS is below...
1104 |(1<<java_lang_invoke_AdapterMethodHandle::OP_SPREAD_ARGS)
1105 |(!UseRicochetFrames ? 0 :
1106 java_lang_invoke_MethodTypeForm::vmlayout_offset_in_bytes() <= 0 ? 0 :
1107 ((1<<java_lang_invoke_AdapterMethodHandle::OP_PRIM_TO_REF)
1108 |(1<<java_lang_invoke_AdapterMethodHandle::OP_COLLECT_ARGS)
1109 |(1<<java_lang_invoke_AdapterMethodHandle::OP_FOLD_ARGS)
1110 ))
1111 );
1112 }
1114 //------------------------------------------------------------------------------
1115 // MethodHandles::generate_method_handle_stub
1116 //
1117 // Generate an "entry" field for a method handle.
1118 // This determines how the method handle will respond to calls.
1119 void MethodHandles::generate_method_handle_stub(MacroAssembler* _masm, MethodHandles::EntryKind ek) {
1120 MethodHandles::EntryKind ek_orig = ek_original_kind(ek);
1122 // Here is the register state during an interpreted call,
1123 // as set up by generate_method_handle_interpreter_entry():
1124 // - rbx: garbage temp (was MethodHandle.invoke methodOop, unused)
1125 // - rcx: receiver method handle
1126 // - rax: method handle type (only used by the check_mtype entry point)
1127 // - rsi/r13: sender SP (must preserve; see prepare_to_jump_from_interpreted)
1128 // - rdx: garbage temp, can blow away
1130 const Register rcx_recv = rcx;
1131 const Register rax_argslot = rax;
1132 const Register rbx_temp = rbx;
1133 const Register rdx_temp = rdx;
1134 const Register rdi_temp = rdi;
1136 // This guy is set up by prepare_to_jump_from_interpreted (from interpreted calls)
1137 // and gen_c2i_adapter (from compiled calls):
1138 const Register saved_last_sp = saved_last_sp_register();
1140 // Argument registers for _raise_exception.
1141 // 32-bit: Pass first two oop/int args in registers ECX and EDX.
1142 const Register rarg0_code = LP64_ONLY(j_rarg0) NOT_LP64(rcx);
1143 const Register rarg1_actual = LP64_ONLY(j_rarg1) NOT_LP64(rdx);
1144 const Register rarg2_required = LP64_ONLY(j_rarg2) NOT_LP64(rdi);
1145 assert_different_registers(rarg0_code, rarg1_actual, rarg2_required, saved_last_sp);
1147 guarantee(java_lang_invoke_MethodHandle::vmentry_offset_in_bytes() != 0, "must have offsets");
1149 // some handy addresses
1150 Address rcx_mh_vmtarget( rcx_recv, java_lang_invoke_MethodHandle::vmtarget_offset_in_bytes() );
1151 Address rcx_dmh_vmindex( rcx_recv, java_lang_invoke_DirectMethodHandle::vmindex_offset_in_bytes() );
1153 Address rcx_bmh_vmargslot( rcx_recv, java_lang_invoke_BoundMethodHandle::vmargslot_offset_in_bytes() );
1154 Address rcx_bmh_argument( rcx_recv, java_lang_invoke_BoundMethodHandle::argument_offset_in_bytes() );
1156 Address rcx_amh_vmargslot( rcx_recv, java_lang_invoke_AdapterMethodHandle::vmargslot_offset_in_bytes() );
1157 Address rcx_amh_argument( rcx_recv, java_lang_invoke_AdapterMethodHandle::argument_offset_in_bytes() );
1158 Address rcx_amh_conversion( rcx_recv, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes() );
1159 Address vmarg; // __ argument_address(vmargslot)
1161 const int java_mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
1163 if (have_entry(ek)) {
1164 __ nop(); // empty stubs make SG sick
1165 return;
1166 }
1168 #ifdef ASSERT
1169 __ push((int32_t) 0xEEEEEEEE);
1170 __ push((int32_t) (intptr_t) entry_name(ek));
1171 LP64_ONLY(__ push((int32_t) high((intptr_t) entry_name(ek))));
1172 __ push((int32_t) 0x33333333);
1173 #endif //ASSERT
1175 address interp_entry = __ pc();
1177 trace_method_handle(_masm, entry_name(ek));
1179 BLOCK_COMMENT(err_msg("Entry %s {", entry_name(ek)));
1181 switch ((int) ek) {
1182 case _raise_exception:
1183 {
1184 // Not a real MH entry, but rather shared code for raising an
1185 // exception. Since we use the compiled entry, arguments are
1186 // expected in compiler argument registers.
1187 assert(raise_exception_method(), "must be set");
1188 assert(raise_exception_method()->from_compiled_entry(), "method must be linked");
1190 const Register rax_pc = rax;
1191 __ pop(rax_pc); // caller PC
1192 __ mov(rsp, saved_last_sp); // cut the stack back to where the caller started
1194 Register rbx_method = rbx_temp;
1195 __ movptr(rbx_method, ExternalAddress((address) &_raise_exception_method));
1197 const int jobject_oop_offset = 0;
1198 __ movptr(rbx_method, Address(rbx_method, jobject_oop_offset)); // dereference the jobject
1200 __ movptr(saved_last_sp, rsp);
1201 __ subptr(rsp, 3 * wordSize);
1202 __ push(rax_pc); // restore caller PC
1204 __ movl (__ argument_address(constant(2)), rarg0_code);
1205 __ movptr(__ argument_address(constant(1)), rarg1_actual);
1206 __ movptr(__ argument_address(constant(0)), rarg2_required);
1207 jump_from_method_handle(_masm, rbx_method, rax);
1208 }
1209 break;
1211 case _invokestatic_mh:
1212 case _invokespecial_mh:
1213 {
1214 Register rbx_method = rbx_temp;
1215 __ load_heap_oop(rbx_method, rcx_mh_vmtarget); // target is a methodOop
1216 __ verify_oop(rbx_method);
1217 // same as TemplateTable::invokestatic or invokespecial,
1218 // minus the CP setup and profiling:
1219 if (ek == _invokespecial_mh) {
1220 // Must load & check the first argument before entering the target method.
1221 __ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
1222 __ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
1223 __ null_check(rcx_recv);
1224 __ verify_oop(rcx_recv);
1225 }
1226 jump_from_method_handle(_masm, rbx_method, rax);
1227 }
1228 break;
1230 case _invokevirtual_mh:
1231 {
1232 // same as TemplateTable::invokevirtual,
1233 // minus the CP setup and profiling:
1235 // pick out the vtable index and receiver offset from the MH,
1236 // and then we can discard it:
1237 __ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
1238 Register rbx_index = rbx_temp;
1239 __ movl(rbx_index, rcx_dmh_vmindex);
1240 // Note: The verifier allows us to ignore rcx_mh_vmtarget.
1241 __ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
1242 __ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
1244 // get receiver klass
1245 Register rax_klass = rax_argslot;
1246 __ load_klass(rax_klass, rcx_recv);
1247 __ verify_oop(rax_klass);
1249 // get target methodOop & entry point
1250 const int base = instanceKlass::vtable_start_offset() * wordSize;
1251 assert(vtableEntry::size() * wordSize == wordSize, "adjust the scaling in the code below");
1252 Address vtable_entry_addr(rax_klass,
1253 rbx_index, Address::times_ptr,
1254 base + vtableEntry::method_offset_in_bytes());
1255 Register rbx_method = rbx_temp;
1256 __ movptr(rbx_method, vtable_entry_addr);
1258 __ verify_oop(rbx_method);
1259 jump_from_method_handle(_masm, rbx_method, rax);
1260 }
1261 break;
1263 case _invokeinterface_mh:
1264 {
1265 // same as TemplateTable::invokeinterface,
1266 // minus the CP setup and profiling:
1268 // pick out the interface and itable index from the MH.
1269 __ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
1270 Register rdx_intf = rdx_temp;
1271 Register rbx_index = rbx_temp;
1272 __ load_heap_oop(rdx_intf, rcx_mh_vmtarget);
1273 __ movl(rbx_index, rcx_dmh_vmindex);
1274 __ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
1275 __ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
1277 // get receiver klass
1278 Register rax_klass = rax_argslot;
1279 __ load_klass(rax_klass, rcx_recv);
1280 __ verify_oop(rax_klass);
1282 Register rbx_method = rbx_index;
1284 // get interface klass
1285 Label no_such_interface;
1286 __ verify_oop(rdx_intf);
1287 __ lookup_interface_method(rax_klass, rdx_intf,
1288 // note: next two args must be the same:
1289 rbx_index, rbx_method,
1290 rdi_temp,
1291 no_such_interface);
1293 __ verify_oop(rbx_method);
1294 jump_from_method_handle(_masm, rbx_method, rax);
1295 __ hlt();
1297 __ bind(no_such_interface);
1298 // Throw an exception.
1299 // For historical reasons, it will be IncompatibleClassChangeError.
1300 __ mov(rbx_temp, rcx_recv); // rarg2_required might be RCX
1301 assert_different_registers(rarg2_required, rbx_temp);
1302 __ movptr(rarg2_required, Address(rdx_intf, java_mirror_offset)); // required interface
1303 __ mov( rarg1_actual, rbx_temp); // bad receiver
1304 __ movl( rarg0_code, (int) Bytecodes::_invokeinterface); // who is complaining?
1305 __ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
1306 }
1307 break;
1309 case _bound_ref_mh:
1310 case _bound_int_mh:
1311 case _bound_long_mh:
1312 case _bound_ref_direct_mh:
1313 case _bound_int_direct_mh:
1314 case _bound_long_direct_mh:
1315 {
1316 const bool direct_to_method = (ek >= _bound_ref_direct_mh);
1317 BasicType arg_type = ek_bound_mh_arg_type(ek);
1318 int arg_slots = type2size[arg_type];
1320 // make room for the new argument:
1321 __ movl(rax_argslot, rcx_bmh_vmargslot);
1322 __ lea(rax_argslot, __ argument_address(rax_argslot));
1324 insert_arg_slots(_masm, arg_slots * stack_move_unit(), rax_argslot, rbx_temp, rdx_temp);
1326 // store bound argument into the new stack slot:
1327 __ load_heap_oop(rbx_temp, rcx_bmh_argument);
1328 if (arg_type == T_OBJECT) {
1329 __ movptr(Address(rax_argslot, 0), rbx_temp);
1330 } else {
1331 Address prim_value_addr(rbx_temp, java_lang_boxing_object::value_offset_in_bytes(arg_type));
1332 move_typed_arg(_masm, arg_type, false,
1333 Address(rax_argslot, 0),
1334 prim_value_addr,
1335 rbx_temp, rdx_temp);
1336 }
1338 if (direct_to_method) {
1339 Register rbx_method = rbx_temp;
1340 __ load_heap_oop(rbx_method, rcx_mh_vmtarget);
1341 __ verify_oop(rbx_method);
1342 jump_from_method_handle(_masm, rbx_method, rax);
1343 } else {
1344 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1345 __ verify_oop(rcx_recv);
1346 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1347 }
1348 }
1349 break;
1351 case _adapter_opt_profiling:
1352 if (java_lang_invoke_CountingMethodHandle::vmcount_offset_in_bytes() != 0) {
1353 Address rcx_mh_vmcount(rcx_recv, java_lang_invoke_CountingMethodHandle::vmcount_offset_in_bytes());
1354 __ incrementl(rcx_mh_vmcount);
1355 }
1356 // fall through
1358 case _adapter_retype_only:
1359 case _adapter_retype_raw:
1360 // immediately jump to the next MH layer:
1361 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1362 __ verify_oop(rcx_recv);
1363 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1364 // This is OK when all parameter types widen.
1365 // It is also OK when a return type narrows.
1366 break;
1368 case _adapter_check_cast:
1369 {
1370 // temps:
1371 Register rbx_klass = rbx_temp; // interesting AMH data
1373 // check a reference argument before jumping to the next layer of MH:
1374 __ movl(rax_argslot, rcx_amh_vmargslot);
1375 vmarg = __ argument_address(rax_argslot);
1377 // What class are we casting to?
1378 __ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
1379 load_klass_from_Class(_masm, rbx_klass);
1381 Label done;
1382 __ movptr(rdx_temp, vmarg);
1383 __ testptr(rdx_temp, rdx_temp);
1384 __ jcc(Assembler::zero, done); // no cast if null
1385 __ load_klass(rdx_temp, rdx_temp);
1387 // live at this point:
1388 // - rbx_klass: klass required by the target method
1389 // - rdx_temp: argument klass to test
1390 // - rcx_recv: adapter method handle
1391 __ check_klass_subtype(rdx_temp, rbx_klass, rax_argslot, done);
1393 // If we get here, the type check failed!
1394 // Call the wrong_method_type stub, passing the failing argument type in rax.
1395 Register rax_mtype = rax_argslot;
1396 __ movl(rax_argslot, rcx_amh_vmargslot); // reload argslot field
1397 __ movptr(rdx_temp, vmarg);
1399 assert_different_registers(rarg2_required, rdx_temp);
1400 __ load_heap_oop(rarg2_required, rcx_amh_argument); // required class
1401 __ mov( rarg1_actual, rdx_temp); // bad object
1402 __ movl( rarg0_code, (int) Bytecodes::_checkcast); // who is complaining?
1403 __ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
1405 __ bind(done);
1406 // get the new MH:
1407 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1408 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1409 }
1410 break;
1412 case _adapter_prim_to_prim:
1413 case _adapter_ref_to_prim:
1414 case _adapter_prim_to_ref:
1415 // handled completely by optimized cases
1416 __ stop("init_AdapterMethodHandle should not issue this");
1417 break;
1419 case _adapter_opt_i2i: // optimized subcase of adapt_prim_to_prim
1420 //case _adapter_opt_f2i: // optimized subcase of adapt_prim_to_prim
1421 case _adapter_opt_l2i: // optimized subcase of adapt_prim_to_prim
1422 case _adapter_opt_unboxi: // optimized subcase of adapt_ref_to_prim
1423 {
1424 // perform an in-place conversion to int or an int subword
1425 __ movl(rax_argslot, rcx_amh_vmargslot);
1426 vmarg = __ argument_address(rax_argslot);
1428 switch (ek) {
1429 case _adapter_opt_i2i:
1430 __ movl(rdx_temp, vmarg);
1431 break;
1432 case _adapter_opt_l2i:
1433 {
1434 // just delete the extra slot; on a little-endian machine we keep the first
1435 __ lea(rax_argslot, __ argument_address(rax_argslot, 1));
1436 remove_arg_slots(_masm, -stack_move_unit(),
1437 rax_argslot, rbx_temp, rdx_temp);
1438 vmarg = Address(rax_argslot, -Interpreter::stackElementSize);
1439 __ movl(rdx_temp, vmarg);
1440 }
1441 break;
1442 case _adapter_opt_unboxi:
1443 {
1444 // Load the value up from the heap.
1445 __ movptr(rdx_temp, vmarg);
1446 int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_INT);
1447 #ifdef ASSERT
1448 for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
1449 if (is_subword_type(BasicType(bt)))
1450 assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(BasicType(bt)), "");
1451 }
1452 #endif
1453 __ null_check(rdx_temp, value_offset);
1454 __ movl(rdx_temp, Address(rdx_temp, value_offset));
1455 // We load this as a word. Because we are little-endian,
1456 // the low bits will be correct, but the high bits may need cleaning.
1457 // The vminfo will guide us to clean those bits.
1458 }
1459 break;
1460 default:
1461 ShouldNotReachHere();
1462 }
1464 // Do the requested conversion and store the value.
1465 Register rbx_vminfo = rbx_temp;
1466 load_conversion_vminfo(_masm, rbx_vminfo, rcx_amh_conversion);
1468 // get the new MH:
1469 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1470 // (now we are done with the old MH)
1472 // original 32-bit vmdata word must be of this form:
1473 // | MBZ:6 | signBitCount:8 | srcDstTypes:8 | conversionOp:8 |
1474 __ xchgptr(rcx, rbx_vminfo); // free rcx for shifts
1475 __ shll(rdx_temp /*, rcx*/);
1476 Label zero_extend, done;
1477 __ testl(rcx, CONV_VMINFO_SIGN_FLAG);
1478 __ jccb(Assembler::zero, zero_extend);
1480 // this path is taken for int->byte, int->short
1481 __ sarl(rdx_temp /*, rcx*/);
1482 __ jmpb(done);
1484 __ bind(zero_extend);
1485 // this is taken for int->char
1486 __ shrl(rdx_temp /*, rcx*/);
1488 __ bind(done);
1489 __ movl(vmarg, rdx_temp); // Store the value.
1490 __ xchgptr(rcx, rbx_vminfo); // restore rcx_recv
1492 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1493 }
1494 break;
1496 case _adapter_opt_i2l: // optimized subcase of adapt_prim_to_prim
1497 case _adapter_opt_unboxl: // optimized subcase of adapt_ref_to_prim
1498 {
1499 // perform an in-place int-to-long or ref-to-long conversion
1500 __ movl(rax_argslot, rcx_amh_vmargslot);
1502 // on a little-endian machine we keep the first slot and add another after
1503 __ lea(rax_argslot, __ argument_address(rax_argslot, 1));
1504 insert_arg_slots(_masm, stack_move_unit(),
1505 rax_argslot, rbx_temp, rdx_temp);
1506 Address vmarg1(rax_argslot, -Interpreter::stackElementSize);
1507 Address vmarg2 = vmarg1.plus_disp(Interpreter::stackElementSize);
1509 switch (ek) {
1510 case _adapter_opt_i2l:
1511 {
1512 #ifdef _LP64
1513 __ movslq(rdx_temp, vmarg1); // Load sign-extended
1514 __ movq(vmarg1, rdx_temp); // Store into first slot
1515 #else
1516 __ movl(rdx_temp, vmarg1);
1517 __ sarl(rdx_temp, BitsPerInt - 1); // __ extend_sign()
1518 __ movl(vmarg2, rdx_temp); // store second word
1519 #endif
1520 }
1521 break;
1522 case _adapter_opt_unboxl:
1523 {
1524 // Load the value up from the heap.
1525 __ movptr(rdx_temp, vmarg1);
1526 int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_LONG);
1527 assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(T_DOUBLE), "");
1528 __ null_check(rdx_temp, value_offset);
1529 #ifdef _LP64
1530 __ movq(rbx_temp, Address(rdx_temp, value_offset));
1531 __ movq(vmarg1, rbx_temp);
1532 #else
1533 __ movl(rbx_temp, Address(rdx_temp, value_offset + 0*BytesPerInt));
1534 __ movl(rdx_temp, Address(rdx_temp, value_offset + 1*BytesPerInt));
1535 __ movl(vmarg1, rbx_temp);
1536 __ movl(vmarg2, rdx_temp);
1537 #endif
1538 }
1539 break;
1540 default:
1541 ShouldNotReachHere();
1542 }
1544 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1545 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1546 }
1547 break;
1549 case _adapter_opt_f2d: // optimized subcase of adapt_prim_to_prim
1550 case _adapter_opt_d2f: // optimized subcase of adapt_prim_to_prim
1551 {
1552 // perform an in-place floating primitive conversion
1553 __ movl(rax_argslot, rcx_amh_vmargslot);
1554 __ lea(rax_argslot, __ argument_address(rax_argslot, 1));
1555 if (ek == _adapter_opt_f2d) {
1556 insert_arg_slots(_masm, stack_move_unit(),
1557 rax_argslot, rbx_temp, rdx_temp);
1558 }
1559 Address vmarg(rax_argslot, -Interpreter::stackElementSize);
1561 #ifdef _LP64
1562 if (ek == _adapter_opt_f2d) {
1563 __ movflt(xmm0, vmarg);
1564 __ cvtss2sd(xmm0, xmm0);
1565 __ movdbl(vmarg, xmm0);
1566 } else {
1567 __ movdbl(xmm0, vmarg);
1568 __ cvtsd2ss(xmm0, xmm0);
1569 __ movflt(vmarg, xmm0);
1570 }
1571 #else //_LP64
1572 if (ek == _adapter_opt_f2d) {
1573 __ fld_s(vmarg); // load float to ST0
1574 __ fstp_d(vmarg); // store double
1575 } else {
1576 __ fld_d(vmarg); // load double to ST0
1577 __ fstp_s(vmarg); // store single
1578 }
1579 #endif //_LP64
1581 if (ek == _adapter_opt_d2f) {
1582 remove_arg_slots(_masm, -stack_move_unit(),
1583 rax_argslot, rbx_temp, rdx_temp);
1584 }
1586 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1587 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1588 }
1589 break;
1591 case _adapter_swap_args:
1592 case _adapter_rot_args:
1593 // handled completely by optimized cases
1594 __ stop("init_AdapterMethodHandle should not issue this");
1595 break;
1597 case _adapter_opt_swap_1:
1598 case _adapter_opt_swap_2:
1599 case _adapter_opt_rot_1_up:
1600 case _adapter_opt_rot_1_down:
1601 case _adapter_opt_rot_2_up:
1602 case _adapter_opt_rot_2_down:
1603 {
1604 int swap_slots = ek_adapter_opt_swap_slots(ek);
1605 int rotate = ek_adapter_opt_swap_mode(ek);
1607 // 'argslot' is the position of the first argument to swap
1608 __ movl(rax_argslot, rcx_amh_vmargslot);
1609 __ lea(rax_argslot, __ argument_address(rax_argslot));
1611 // 'vminfo' is the second
1612 Register rbx_destslot = rbx_temp;
1613 load_conversion_vminfo(_masm, rbx_destslot, rcx_amh_conversion);
1614 __ lea(rbx_destslot, __ argument_address(rbx_destslot));
1615 if (VerifyMethodHandles)
1616 verify_argslot(_masm, rbx_destslot, "swap point must fall within current frame");
1618 assert(Interpreter::stackElementSize == wordSize, "else rethink use of wordSize here");
1619 if (!rotate) {
1620 // simple swap
1621 for (int i = 0; i < swap_slots; i++) {
1622 __ movptr(rdi_temp, Address(rax_argslot, i * wordSize));
1623 __ movptr(rdx_temp, Address(rbx_destslot, i * wordSize));
1624 __ movptr(Address(rax_argslot, i * wordSize), rdx_temp);
1625 __ movptr(Address(rbx_destslot, i * wordSize), rdi_temp);
1626 }
1627 } else {
1628 // A rotate is actually pair of moves, with an "odd slot" (or pair)
1629 // changing place with a series of other slots.
1630 // First, push the "odd slot", which is going to get overwritten
1631 for (int i = swap_slots - 1; i >= 0; i--) {
1632 // handle one with rdi_temp instead of a push:
1633 if (i == 0) __ movptr(rdi_temp, Address(rax_argslot, i * wordSize));
1634 else __ pushptr( Address(rax_argslot, i * wordSize));
1635 }
1636 if (rotate > 0) {
1637 // Here is rotate > 0:
1638 // (low mem) (high mem)
1639 // | dest: more_slots... | arg: odd_slot :arg+1 |
1640 // =>
1641 // | dest: odd_slot | dest+1: more_slots... :arg+1 |
1642 // work argslot down to destslot, copying contiguous data upwards
1643 // pseudo-code:
1644 // rax = src_addr - swap_bytes
1645 // rbx = dest_addr
1646 // while (rax >= rbx) *(rax + swap_bytes) = *(rax + 0), rax--;
1647 move_arg_slots_up(_masm,
1648 rbx_destslot,
1649 Address(rax_argslot, 0),
1650 swap_slots,
1651 rax_argslot, rdx_temp);
1652 } else {
1653 // Here is the other direction, rotate < 0:
1654 // (low mem) (high mem)
1655 // | arg: odd_slot | arg+1: more_slots... :dest+1 |
1656 // =>
1657 // | arg: more_slots... | dest: odd_slot :dest+1 |
1658 // work argslot up to destslot, copying contiguous data downwards
1659 // pseudo-code:
1660 // rax = src_addr + swap_bytes
1661 // rbx = dest_addr
1662 // while (rax <= rbx) *(rax - swap_bytes) = *(rax + 0), rax++;
1663 // dest_slot denotes an exclusive upper limit
1664 int limit_bias = OP_ROT_ARGS_DOWN_LIMIT_BIAS;
1665 if (limit_bias != 0)
1666 __ addptr(rbx_destslot, - limit_bias * wordSize);
1667 move_arg_slots_down(_masm,
1668 Address(rax_argslot, swap_slots * wordSize),
1669 rbx_destslot,
1670 -swap_slots,
1671 rax_argslot, rdx_temp);
1672 __ subptr(rbx_destslot, swap_slots * wordSize);
1673 }
1674 // pop the original first chunk into the destination slot, now free
1675 for (int i = 0; i < swap_slots; i++) {
1676 if (i == 0) __ movptr(Address(rbx_destslot, i * wordSize), rdi_temp);
1677 else __ popptr(Address(rbx_destslot, i * wordSize));
1678 }
1679 }
1681 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1682 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1683 }
1684 break;
1686 case _adapter_dup_args:
1687 {
1688 // 'argslot' is the position of the first argument to duplicate
1689 __ movl(rax_argslot, rcx_amh_vmargslot);
1690 __ lea(rax_argslot, __ argument_address(rax_argslot));
1692 // 'stack_move' is negative number of words to duplicate
1693 Register rdi_stack_move = rdi_temp;
1694 load_stack_move(_masm, rdi_stack_move, rcx_recv, true);
1696 if (VerifyMethodHandles) {
1697 verify_argslots(_masm, rdi_stack_move, rax_argslot, true,
1698 "copied argument(s) must fall within current frame");
1699 }
1701 // insert location is always the bottom of the argument list:
1702 Address insert_location = __ argument_address(constant(0));
1703 int pre_arg_words = insert_location.disp() / wordSize; // return PC is pushed
1704 assert(insert_location.base() == rsp, "");
1706 __ negl(rdi_stack_move);
1707 push_arg_slots(_masm, rax_argslot, rdi_stack_move,
1708 pre_arg_words, rbx_temp, rdx_temp);
1710 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1711 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1712 }
1713 break;
1715 case _adapter_drop_args:
1716 {
1717 // 'argslot' is the position of the first argument to nuke
1718 __ movl(rax_argslot, rcx_amh_vmargslot);
1719 __ lea(rax_argslot, __ argument_address(rax_argslot));
1721 // (must do previous push after argslot address is taken)
1723 // 'stack_move' is number of words to drop
1724 Register rdi_stack_move = rdi_temp;
1725 load_stack_move(_masm, rdi_stack_move, rcx_recv, false);
1726 remove_arg_slots(_masm, rdi_stack_move,
1727 rax_argslot, rbx_temp, rdx_temp);
1729 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
1730 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
1731 }
1732 break;
1734 case _adapter_collect_args:
1735 case _adapter_fold_args:
1736 case _adapter_spread_args:
1737 // handled completely by optimized cases
1738 __ stop("init_AdapterMethodHandle should not issue this");
1739 break;
1741 case _adapter_opt_collect_ref:
1742 case _adapter_opt_collect_int:
1743 case _adapter_opt_collect_long:
1744 case _adapter_opt_collect_float:
1745 case _adapter_opt_collect_double:
1746 case _adapter_opt_collect_void:
1747 case _adapter_opt_collect_0_ref:
1748 case _adapter_opt_collect_1_ref:
1749 case _adapter_opt_collect_2_ref:
1750 case _adapter_opt_collect_3_ref:
1751 case _adapter_opt_collect_4_ref:
1752 case _adapter_opt_collect_5_ref:
1753 case _adapter_opt_filter_S0_ref:
1754 case _adapter_opt_filter_S1_ref:
1755 case _adapter_opt_filter_S2_ref:
1756 case _adapter_opt_filter_S3_ref:
1757 case _adapter_opt_filter_S4_ref:
1758 case _adapter_opt_filter_S5_ref:
1759 case _adapter_opt_collect_2_S0_ref:
1760 case _adapter_opt_collect_2_S1_ref:
1761 case _adapter_opt_collect_2_S2_ref:
1762 case _adapter_opt_collect_2_S3_ref:
1763 case _adapter_opt_collect_2_S4_ref:
1764 case _adapter_opt_collect_2_S5_ref:
1765 case _adapter_opt_fold_ref:
1766 case _adapter_opt_fold_int:
1767 case _adapter_opt_fold_long:
1768 case _adapter_opt_fold_float:
1769 case _adapter_opt_fold_double:
1770 case _adapter_opt_fold_void:
1771 case _adapter_opt_fold_1_ref:
1772 case _adapter_opt_fold_2_ref:
1773 case _adapter_opt_fold_3_ref:
1774 case _adapter_opt_fold_4_ref:
1775 case _adapter_opt_fold_5_ref:
1776 {
1777 // Given a fresh incoming stack frame, build a new ricochet frame.
1778 // On entry, TOS points at a return PC, and RBP is the callers frame ptr.
1779 // RSI/R13 has the caller's exact stack pointer, which we must also preserve.
1780 // RCX contains an AdapterMethodHandle of the indicated kind.
1782 // Relevant AMH fields:
1783 // amh.vmargslot:
1784 // points to the trailing edge of the arguments
1785 // to filter, collect, or fold. For a boxing operation,
1786 // it points just after the single primitive value.
1787 // amh.argument:
1788 // recursively called MH, on |collect| arguments
1789 // amh.vmtarget:
1790 // final destination MH, on return value, etc.
1791 // amh.conversion.dest:
1792 // tells what is the type of the return value
1793 // (not needed here, since dest is also derived from ek)
1794 // amh.conversion.vminfo:
1795 // points to the trailing edge of the return value
1796 // when the vmtarget is to be called; this is
1797 // equal to vmargslot + (retained ? |collect| : 0)
1799 // Pass 0 or more argument slots to the recursive target.
1800 int collect_count_constant = ek_adapter_opt_collect_count(ek);
1802 // The collected arguments are copied from the saved argument list:
1803 int collect_slot_constant = ek_adapter_opt_collect_slot(ek);
1805 assert(ek_orig == _adapter_collect_args ||
1806 ek_orig == _adapter_fold_args, "");
1807 bool retain_original_args = (ek_orig == _adapter_fold_args);
1809 // The return value is replaced (or inserted) at the 'vminfo' argslot.
1810 // Sometimes we can compute this statically.
1811 int dest_slot_constant = -1;
1812 if (!retain_original_args)
1813 dest_slot_constant = collect_slot_constant;
1814 else if (collect_slot_constant >= 0 && collect_count_constant >= 0)
1815 // We are preserving all the arguments, and the return value is prepended,
1816 // so the return slot is to the left (above) the |collect| sequence.
1817 dest_slot_constant = collect_slot_constant + collect_count_constant;
1819 // Replace all those slots by the result of the recursive call.
1820 // The result type can be one of ref, int, long, float, double, void.
1821 // In the case of void, nothing is pushed on the stack after return.
1822 BasicType dest = ek_adapter_opt_collect_type(ek);
1823 assert(dest == type2wfield[dest], "dest is a stack slot type");
1824 int dest_count = type2size[dest];
1825 assert(dest_count == 1 || dest_count == 2 || (dest_count == 0 && dest == T_VOID), "dest has a size");
1827 // Choose a return continuation.
1828 EntryKind ek_ret = _adapter_opt_return_any;
1829 if (dest != T_CONFLICT && OptimizeMethodHandles) {
1830 switch (dest) {
1831 case T_INT : ek_ret = _adapter_opt_return_int; break;
1832 case T_LONG : ek_ret = _adapter_opt_return_long; break;
1833 case T_FLOAT : ek_ret = _adapter_opt_return_float; break;
1834 case T_DOUBLE : ek_ret = _adapter_opt_return_double; break;
1835 case T_OBJECT : ek_ret = _adapter_opt_return_ref; break;
1836 case T_VOID : ek_ret = _adapter_opt_return_void; break;
1837 default : ShouldNotReachHere();
1838 }
1839 if (dest == T_OBJECT && dest_slot_constant >= 0) {
1840 EntryKind ek_try = EntryKind(_adapter_opt_return_S0_ref + dest_slot_constant);
1841 if (ek_try <= _adapter_opt_return_LAST &&
1842 ek_adapter_opt_return_slot(ek_try) == dest_slot_constant) {
1843 ek_ret = ek_try;
1844 }
1845 }
1846 assert(ek_adapter_opt_return_type(ek_ret) == dest, "");
1847 }
1849 // Already pushed: ... keep1 | collect | keep2 | sender_pc |
1850 // push(sender_pc);
1852 // Compute argument base:
1853 Register rax_argv = rax_argslot;
1854 __ lea(rax_argv, __ argument_address(constant(0)));
1856 // Push a few extra argument words, if we need them to store the return value.
1857 {
1858 int extra_slots = 0;
1859 if (retain_original_args) {
1860 extra_slots = dest_count;
1861 } else if (collect_count_constant == -1) {
1862 extra_slots = dest_count; // collect_count might be zero; be generous
1863 } else if (dest_count > collect_count_constant) {
1864 extra_slots = (dest_count - collect_count_constant);
1865 } else {
1866 // else we know we have enough dead space in |collect| to repurpose for return values
1867 }
1868 DEBUG_ONLY(extra_slots += 1);
1869 if (extra_slots > 0) {
1870 __ pop(rbx_temp); // return value
1871 __ subptr(rsp, (extra_slots * Interpreter::stackElementSize));
1872 // Push guard word #2 in debug mode.
1873 DEBUG_ONLY(__ movptr(Address(rsp, 0), (int32_t) RicochetFrame::MAGIC_NUMBER_2));
1874 __ push(rbx_temp);
1875 }
1876 }
1878 RicochetFrame::enter_ricochet_frame(_masm, rcx_recv, rax_argv,
1879 entry(ek_ret)->from_interpreted_entry(), rbx_temp);
1881 // Now pushed: ... keep1 | collect | keep2 | RF |
1882 // some handy frame slots:
1883 Address exact_sender_sp_addr = RicochetFrame::frame_address(RicochetFrame::exact_sender_sp_offset_in_bytes());
1884 Address conversion_addr = RicochetFrame::frame_address(RicochetFrame::conversion_offset_in_bytes());
1885 Address saved_args_base_addr = RicochetFrame::frame_address(RicochetFrame::saved_args_base_offset_in_bytes());
1887 #ifdef ASSERT
1888 if (VerifyMethodHandles && dest != T_CONFLICT) {
1889 BLOCK_COMMENT("verify AMH.conv.dest");
1890 load_conversion_dest_type(_masm, rbx_temp, conversion_addr);
1891 Label L_dest_ok;
1892 __ cmpl(rbx_temp, (int) dest);
1893 __ jcc(Assembler::equal, L_dest_ok);
1894 if (dest == T_INT) {
1895 for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
1896 if (is_subword_type(BasicType(bt))) {
1897 __ cmpl(rbx_temp, (int) bt);
1898 __ jcc(Assembler::equal, L_dest_ok);
1899 }
1900 }
1901 }
1902 __ stop("bad dest in AMH.conv");
1903 __ BIND(L_dest_ok);
1904 }
1905 #endif //ASSERT
1907 // Find out where the original copy of the recursive argument sequence begins.
1908 Register rax_coll = rax_argv;
1909 {
1910 RegisterOrConstant collect_slot = collect_slot_constant;
1911 if (collect_slot_constant == -1) {
1912 __ movl(rdi_temp, rcx_amh_vmargslot);
1913 collect_slot = rdi_temp;
1914 }
1915 if (collect_slot_constant != 0)
1916 __ lea(rax_coll, Address(rax_argv, collect_slot, Interpreter::stackElementScale()));
1917 // rax_coll now points at the trailing edge of |collect| and leading edge of |keep2|
1918 }
1920 // Replace the old AMH with the recursive MH. (No going back now.)
1921 // In the case of a boxing call, the recursive call is to a 'boxer' method,
1922 // such as Integer.valueOf or Long.valueOf. In the case of a filter
1923 // or collect call, it will take one or more arguments, transform them,
1924 // and return some result, to store back into argument_base[vminfo].
1925 __ load_heap_oop(rcx_recv, rcx_amh_argument);
1926 if (VerifyMethodHandles) verify_method_handle(_masm, rcx_recv);
1928 // Push a space for the recursively called MH first:
1929 __ push((int32_t)NULL_WORD);
1931 // Calculate |collect|, the number of arguments we are collecting.
1932 Register rdi_collect_count = rdi_temp;
1933 RegisterOrConstant collect_count;
1934 if (collect_count_constant >= 0) {
1935 collect_count = collect_count_constant;
1936 } else {
1937 __ load_method_handle_vmslots(rdi_collect_count, rcx_recv, rdx_temp);
1938 collect_count = rdi_collect_count;
1939 }
1940 #ifdef ASSERT
1941 if (VerifyMethodHandles && collect_count_constant >= 0) {
1942 __ load_method_handle_vmslots(rbx_temp, rcx_recv, rdx_temp);
1943 Label L_count_ok;
1944 __ cmpl(rbx_temp, collect_count_constant);
1945 __ jcc(Assembler::equal, L_count_ok);
1946 __ stop("bad vminfo in AMH.conv");
1947 __ BIND(L_count_ok);
1948 }
1949 #endif //ASSERT
1951 // copy |collect| slots directly to TOS:
1952 push_arg_slots(_masm, rax_coll, collect_count, 0, rbx_temp, rdx_temp);
1953 // Now pushed: ... keep1 | collect | keep2 | RF... | collect |
1954 // rax_coll still points at the trailing edge of |collect| and leading edge of |keep2|
1956 // If necessary, adjust the saved arguments to make room for the eventual return value.
1957 // Normal adjustment: ... keep1 | +dest+ | -collect- | keep2 | RF... | collect |
1958 // If retaining args: ... keep1 | +dest+ | collect | keep2 | RF... | collect |
1959 // In the non-retaining case, this might move keep2 either up or down.
1960 // We don't have to copy the whole | RF... collect | complex,
1961 // but we must adjust RF.saved_args_base.
1962 // Also, from now on, we will forget about the original copy of |collect|.
1963 // If we are retaining it, we will treat it as part of |keep2|.
1964 // For clarity we will define |keep3| = |collect|keep2| or |keep2|.
1966 BLOCK_COMMENT("adjust trailing arguments {");
1967 // Compare the sizes of |+dest+| and |-collect-|, which are opposed opening and closing movements.
1968 int open_count = dest_count;
1969 RegisterOrConstant close_count = collect_count_constant;
1970 Register rdi_close_count = rdi_collect_count;
1971 if (retain_original_args) {
1972 close_count = constant(0);
1973 } else if (collect_count_constant == -1) {
1974 close_count = rdi_collect_count;
1975 }
1977 // How many slots need moving? This is simply dest_slot (0 => no |keep3|).
1978 RegisterOrConstant keep3_count;
1979 Register rsi_keep3_count = rsi; // can repair from RF.exact_sender_sp
1980 if (dest_slot_constant >= 0) {
1981 keep3_count = dest_slot_constant;
1982 } else {
1983 load_conversion_vminfo(_masm, rsi_keep3_count, conversion_addr);
1984 keep3_count = rsi_keep3_count;
1985 }
1986 #ifdef ASSERT
1987 if (VerifyMethodHandles && dest_slot_constant >= 0) {
1988 load_conversion_vminfo(_masm, rbx_temp, conversion_addr);
1989 Label L_vminfo_ok;
1990 __ cmpl(rbx_temp, dest_slot_constant);
1991 __ jcc(Assembler::equal, L_vminfo_ok);
1992 __ stop("bad vminfo in AMH.conv");
1993 __ BIND(L_vminfo_ok);
1994 }
1995 #endif //ASSERT
1997 // tasks remaining:
1998 bool move_keep3 = (!keep3_count.is_constant() || keep3_count.as_constant() != 0);
1999 bool stomp_dest = (NOT_DEBUG(dest == T_OBJECT) DEBUG_ONLY(dest_count != 0));
2000 bool fix_arg_base = (!close_count.is_constant() || open_count != close_count.as_constant());
2002 if (stomp_dest | fix_arg_base) {
2003 // we will probably need an updated rax_argv value
2004 if (collect_slot_constant >= 0) {
2005 // rax_coll already holds the leading edge of |keep2|, so tweak it
2006 assert(rax_coll == rax_argv, "elided a move");
2007 if (collect_slot_constant != 0)
2008 __ subptr(rax_argv, collect_slot_constant * Interpreter::stackElementSize);
2009 } else {
2010 // Just reload from RF.saved_args_base.
2011 __ movptr(rax_argv, saved_args_base_addr);
2012 }
2013 }
2015 // Old and new argument locations (based at slot 0).
2016 // Net shift (&new_argv - &old_argv) is (close_count - open_count).
2017 bool zero_open_count = (open_count == 0); // remember this bit of info
2018 if (move_keep3 && fix_arg_base) {
2019 // It will be easier to have everything in one register:
2020 if (close_count.is_register()) {
2021 // Deduct open_count from close_count register to get a clean +/- value.
2022 __ subptr(close_count.as_register(), open_count);
2023 } else {
2024 close_count = close_count.as_constant() - open_count;
2025 }
2026 open_count = 0;
2027 }
2028 Address old_argv(rax_argv, 0);
2029 Address new_argv(rax_argv, close_count, Interpreter::stackElementScale(),
2030 - open_count * Interpreter::stackElementSize);
2032 // First decide if any actual data are to be moved.
2033 // We can skip if (a) |keep3| is empty, or (b) the argument list size didn't change.
2034 // (As it happens, all movements involve an argument list size change.)
2036 // If there are variable parameters, use dynamic checks to skip around the whole mess.
2037 Label L_done;
2038 if (!keep3_count.is_constant()) {
2039 __ testl(keep3_count.as_register(), keep3_count.as_register());
2040 __ jcc(Assembler::zero, L_done);
2041 }
2042 if (!close_count.is_constant()) {
2043 __ cmpl(close_count.as_register(), open_count);
2044 __ jcc(Assembler::equal, L_done);
2045 }
2047 if (move_keep3 && fix_arg_base) {
2048 bool emit_move_down = false, emit_move_up = false, emit_guard = false;
2049 if (!close_count.is_constant()) {
2050 emit_move_down = emit_guard = !zero_open_count;
2051 emit_move_up = true;
2052 } else if (open_count != close_count.as_constant()) {
2053 emit_move_down = (open_count > close_count.as_constant());
2054 emit_move_up = !emit_move_down;
2055 }
2056 Label L_move_up;
2057 if (emit_guard) {
2058 __ cmpl(close_count.as_register(), open_count);
2059 __ jcc(Assembler::greater, L_move_up);
2060 }
2062 if (emit_move_down) {
2063 // Move arguments down if |+dest+| > |-collect-|
2064 // (This is rare, except when arguments are retained.)
2065 // This opens space for the return value.
2066 if (keep3_count.is_constant()) {
2067 for (int i = 0; i < keep3_count.as_constant(); i++) {
2068 __ movptr(rdx_temp, old_argv.plus_disp(i * Interpreter::stackElementSize));
2069 __ movptr( new_argv.plus_disp(i * Interpreter::stackElementSize), rdx_temp);
2070 }
2071 } else {
2072 Register rbx_argv_top = rbx_temp;
2073 __ lea(rbx_argv_top, old_argv.plus_disp(keep3_count, Interpreter::stackElementScale()));
2074 move_arg_slots_down(_masm,
2075 old_argv, // beginning of old argv
2076 rbx_argv_top, // end of old argv
2077 close_count, // distance to move down (must be negative)
2078 rax_argv, rdx_temp);
2079 // Used argv as an iteration variable; reload from RF.saved_args_base.
2080 __ movptr(rax_argv, saved_args_base_addr);
2081 }
2082 }
2084 if (emit_guard) {
2085 __ jmp(L_done); // assumes emit_move_up is true also
2086 __ BIND(L_move_up);
2087 }
2089 if (emit_move_up) {
2091 // Move arguments up if |+dest+| < |-collect-|
2092 // (This is usual, except when |keep3| is empty.)
2093 // This closes up the space occupied by the now-deleted collect values.
2094 if (keep3_count.is_constant()) {
2095 for (int i = keep3_count.as_constant() - 1; i >= 0; i--) {
2096 __ movptr(rdx_temp, old_argv.plus_disp(i * Interpreter::stackElementSize));
2097 __ movptr( new_argv.plus_disp(i * Interpreter::stackElementSize), rdx_temp);
2098 }
2099 } else {
2100 Address argv_top = old_argv.plus_disp(keep3_count, Interpreter::stackElementScale());
2101 move_arg_slots_up(_masm,
2102 rax_argv, // beginning of old argv
2103 argv_top, // end of old argv
2104 close_count, // distance to move up (must be positive)
2105 rbx_temp, rdx_temp);
2106 }
2107 }
2108 }
2109 __ BIND(L_done);
2111 if (fix_arg_base) {
2112 // adjust RF.saved_args_base by adding (close_count - open_count)
2113 if (!new_argv.is_same_address(Address(rax_argv, 0)))
2114 __ lea(rax_argv, new_argv);
2115 __ movptr(saved_args_base_addr, rax_argv);
2116 }
2118 if (stomp_dest) {
2119 // Stomp the return slot, so it doesn't hold garbage.
2120 // This isn't strictly necessary, but it may help detect bugs.
2121 int forty_two = RicochetFrame::RETURN_VALUE_PLACEHOLDER;
2122 __ movptr(Address(rax_argv, keep3_count, Address::times_ptr),
2123 (int32_t) forty_two);
2124 // uses rsi_keep3_count
2125 }
2126 BLOCK_COMMENT("} adjust trailing arguments");
2128 BLOCK_COMMENT("do_recursive_call");
2129 __ mov(saved_last_sp, rsp); // set rsi/r13 for callee
2130 __ pushptr(ExternalAddress(SharedRuntime::ricochet_blob()->bounce_addr()).addr());
2131 // The globally unique bounce address has two purposes:
2132 // 1. It helps the JVM recognize this frame (frame::is_ricochet_frame).
2133 // 2. When returned to, it cuts back the stack and redirects control flow
2134 // to the return handler.
2135 // The return handler will further cut back the stack when it takes
2136 // down the RF. Perhaps there is a way to streamline this further.
2138 // State during recursive call:
2139 // ... keep1 | dest | dest=42 | keep3 | RF... | collect | bounce_pc |
2140 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
2142 break;
2143 }
2145 case _adapter_opt_return_ref:
2146 case _adapter_opt_return_int:
2147 case _adapter_opt_return_long:
2148 case _adapter_opt_return_float:
2149 case _adapter_opt_return_double:
2150 case _adapter_opt_return_void:
2151 case _adapter_opt_return_S0_ref:
2152 case _adapter_opt_return_S1_ref:
2153 case _adapter_opt_return_S2_ref:
2154 case _adapter_opt_return_S3_ref:
2155 case _adapter_opt_return_S4_ref:
2156 case _adapter_opt_return_S5_ref:
2157 {
2158 BasicType dest_type_constant = ek_adapter_opt_return_type(ek);
2159 int dest_slot_constant = ek_adapter_opt_return_slot(ek);
2161 if (VerifyMethodHandles) RicochetFrame::verify_clean(_masm);
2163 if (dest_slot_constant == -1) {
2164 // The current stub is a general handler for this dest_type.
2165 // It can be called from _adapter_opt_return_any below.
2166 // Stash the address in a little table.
2167 assert((dest_type_constant & CONV_TYPE_MASK) == dest_type_constant, "oob");
2168 address return_handler = __ pc();
2169 _adapter_return_handlers[dest_type_constant] = return_handler;
2170 if (dest_type_constant == T_INT) {
2171 // do the subword types too
2172 for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
2173 if (is_subword_type(BasicType(bt)) &&
2174 _adapter_return_handlers[bt] == NULL) {
2175 _adapter_return_handlers[bt] = return_handler;
2176 }
2177 }
2178 }
2179 }
2181 Register rbx_arg_base = rbx_temp;
2182 assert_different_registers(rax, rdx, // possibly live return value registers
2183 rdi_temp, rbx_arg_base);
2185 Address conversion_addr = RicochetFrame::frame_address(RicochetFrame::conversion_offset_in_bytes());
2186 Address saved_args_base_addr = RicochetFrame::frame_address(RicochetFrame::saved_args_base_offset_in_bytes());
2188 __ movptr(rbx_arg_base, saved_args_base_addr);
2189 RegisterOrConstant dest_slot = dest_slot_constant;
2190 if (dest_slot_constant == -1) {
2191 load_conversion_vminfo(_masm, rdi_temp, conversion_addr);
2192 dest_slot = rdi_temp;
2193 }
2194 // Store the result back into the argslot.
2195 // This code uses the interpreter calling sequence, in which the return value
2196 // is usually left in the TOS register, as defined by InterpreterMacroAssembler::pop.
2197 // There are certain irregularities with floating point values, which can be seen
2198 // in TemplateInterpreterGenerator::generate_return_entry_for.
2199 move_return_value(_masm, dest_type_constant, Address(rbx_arg_base, dest_slot, Interpreter::stackElementScale()));
2201 RicochetFrame::leave_ricochet_frame(_masm, rcx_recv, rbx_arg_base, rdx_temp);
2202 __ push(rdx_temp); // repush the return PC
2204 // Load the final target and go.
2205 if (VerifyMethodHandles) verify_method_handle(_masm, rcx_recv);
2206 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
2207 __ hlt(); // --------------------
2208 break;
2209 }
2211 case _adapter_opt_return_any:
2212 {
2213 if (VerifyMethodHandles) RicochetFrame::verify_clean(_masm);
2214 Register rdi_conv = rdi_temp;
2215 assert_different_registers(rax, rdx, // possibly live return value registers
2216 rdi_conv, rbx_temp);
2218 Address conversion_addr = RicochetFrame::frame_address(RicochetFrame::conversion_offset_in_bytes());
2219 load_conversion_dest_type(_masm, rdi_conv, conversion_addr);
2220 __ lea(rbx_temp, ExternalAddress((address) &_adapter_return_handlers[0]));
2221 __ movptr(rbx_temp, Address(rbx_temp, rdi_conv, Address::times_ptr));
2223 #ifdef ASSERT
2224 { Label L_badconv;
2225 __ testptr(rbx_temp, rbx_temp);
2226 __ jccb(Assembler::zero, L_badconv);
2227 __ jmp(rbx_temp);
2228 __ bind(L_badconv);
2229 __ stop("bad method handle return");
2230 }
2231 #else //ASSERT
2232 __ jmp(rbx_temp);
2233 #endif //ASSERT
2234 break;
2235 }
2237 case _adapter_opt_spread_0:
2238 case _adapter_opt_spread_1_ref:
2239 case _adapter_opt_spread_2_ref:
2240 case _adapter_opt_spread_3_ref:
2241 case _adapter_opt_spread_4_ref:
2242 case _adapter_opt_spread_5_ref:
2243 case _adapter_opt_spread_ref:
2244 case _adapter_opt_spread_byte:
2245 case _adapter_opt_spread_char:
2246 case _adapter_opt_spread_short:
2247 case _adapter_opt_spread_int:
2248 case _adapter_opt_spread_long:
2249 case _adapter_opt_spread_float:
2250 case _adapter_opt_spread_double:
2251 {
2252 // spread an array out into a group of arguments
2253 int length_constant = ek_adapter_opt_spread_count(ek);
2254 bool length_can_be_zero = (length_constant == 0);
2255 if (length_constant < 0) {
2256 // some adapters with variable length must handle the zero case
2257 if (!OptimizeMethodHandles ||
2258 ek_adapter_opt_spread_type(ek) != T_OBJECT)
2259 length_can_be_zero = true;
2260 }
2262 // find the address of the array argument
2263 __ movl(rax_argslot, rcx_amh_vmargslot);
2264 __ lea(rax_argslot, __ argument_address(rax_argslot));
2266 // grab another temp
2267 Register rsi_temp = rsi;
2268 { if (rsi_temp == saved_last_sp) __ push(saved_last_sp); }
2269 // (preceding push must be done after argslot address is taken!)
2270 #define UNPUSH_RSI \
2271 { if (rsi_temp == saved_last_sp) __ pop(saved_last_sp); }
2273 // arx_argslot points both to the array and to the first output arg
2274 vmarg = Address(rax_argslot, 0);
2276 // Get the array value.
2277 Register rsi_array = rsi_temp;
2278 Register rdx_array_klass = rdx_temp;
2279 BasicType elem_type = ek_adapter_opt_spread_type(ek);
2280 int elem_slots = type2size[elem_type]; // 1 or 2
2281 int array_slots = 1; // array is always a T_OBJECT
2282 int length_offset = arrayOopDesc::length_offset_in_bytes();
2283 int elem0_offset = arrayOopDesc::base_offset_in_bytes(elem_type);
2284 __ movptr(rsi_array, vmarg);
2286 Label L_array_is_empty, L_insert_arg_space, L_copy_args, L_args_done;
2287 if (length_can_be_zero) {
2288 // handle the null pointer case, if zero is allowed
2289 Label L_skip;
2290 if (length_constant < 0) {
2291 load_conversion_vminfo(_masm, rbx_temp, rcx_amh_conversion);
2292 __ testl(rbx_temp, rbx_temp);
2293 __ jcc(Assembler::notZero, L_skip);
2294 }
2295 __ testptr(rsi_array, rsi_array);
2296 __ jcc(Assembler::zero, L_array_is_empty);
2297 __ bind(L_skip);
2298 }
2299 __ null_check(rsi_array, oopDesc::klass_offset_in_bytes());
2300 __ load_klass(rdx_array_klass, rsi_array);
2302 // Check the array type.
2303 Register rbx_klass = rbx_temp;
2304 __ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
2305 load_klass_from_Class(_masm, rbx_klass);
2307 Label ok_array_klass, bad_array_klass, bad_array_length;
2308 __ check_klass_subtype(rdx_array_klass, rbx_klass, rdi_temp, ok_array_klass);
2309 // If we get here, the type check failed!
2310 __ jmp(bad_array_klass);
2311 __ BIND(ok_array_klass);
2313 // Check length.
2314 if (length_constant >= 0) {
2315 __ cmpl(Address(rsi_array, length_offset), length_constant);
2316 } else {
2317 Register rbx_vminfo = rbx_temp;
2318 load_conversion_vminfo(_masm, rbx_vminfo, rcx_amh_conversion);
2319 __ cmpl(rbx_vminfo, Address(rsi_array, length_offset));
2320 }
2321 __ jcc(Assembler::notEqual, bad_array_length);
2323 Register rdx_argslot_limit = rdx_temp;
2325 // Array length checks out. Now insert any required stack slots.
2326 if (length_constant == -1) {
2327 // Form a pointer to the end of the affected region.
2328 __ lea(rdx_argslot_limit, Address(rax_argslot, Interpreter::stackElementSize));
2329 // 'stack_move' is negative number of words to insert
2330 // This number already accounts for elem_slots.
2331 Register rdi_stack_move = rdi_temp;
2332 load_stack_move(_masm, rdi_stack_move, rcx_recv, true);
2333 __ cmpptr(rdi_stack_move, 0);
2334 assert(stack_move_unit() < 0, "else change this comparison");
2335 __ jcc(Assembler::less, L_insert_arg_space);
2336 __ jcc(Assembler::equal, L_copy_args);
2337 // single argument case, with no array movement
2338 __ BIND(L_array_is_empty);
2339 remove_arg_slots(_masm, -stack_move_unit() * array_slots,
2340 rax_argslot, rbx_temp, rdx_temp);
2341 __ jmp(L_args_done); // no spreading to do
2342 __ BIND(L_insert_arg_space);
2343 // come here in the usual case, stack_move < 0 (2 or more spread arguments)
2344 Register rsi_temp = rsi_array; // spill this
2345 insert_arg_slots(_masm, rdi_stack_move,
2346 rax_argslot, rbx_temp, rsi_temp);
2347 // reload the array since rsi was killed
2348 // reload from rdx_argslot_limit since rax_argslot is now decremented
2349 __ movptr(rsi_array, Address(rdx_argslot_limit, -Interpreter::stackElementSize));
2350 } else if (length_constant >= 1) {
2351 int new_slots = (length_constant * elem_slots) - array_slots;
2352 insert_arg_slots(_masm, new_slots * stack_move_unit(),
2353 rax_argslot, rbx_temp, rdx_temp);
2354 } else if (length_constant == 0) {
2355 __ BIND(L_array_is_empty);
2356 remove_arg_slots(_masm, -stack_move_unit() * array_slots,
2357 rax_argslot, rbx_temp, rdx_temp);
2358 } else {
2359 ShouldNotReachHere();
2360 }
2362 // Copy from the array to the new slots.
2363 // Note: Stack change code preserves integrity of rax_argslot pointer.
2364 // So even after slot insertions, rax_argslot still points to first argument.
2365 // Beware: Arguments that are shallow on the stack are deep in the array,
2366 // and vice versa. So a downward-growing stack (the usual) has to be copied
2367 // elementwise in reverse order from the source array.
2368 __ BIND(L_copy_args);
2369 if (length_constant == -1) {
2370 // [rax_argslot, rdx_argslot_limit) is the area we are inserting into.
2371 // Array element [0] goes at rdx_argslot_limit[-wordSize].
2372 Register rsi_source = rsi_array;
2373 __ lea(rsi_source, Address(rsi_array, elem0_offset));
2374 Register rdx_fill_ptr = rdx_argslot_limit;
2375 Label loop;
2376 __ BIND(loop);
2377 __ addptr(rdx_fill_ptr, -Interpreter::stackElementSize * elem_slots);
2378 move_typed_arg(_masm, elem_type, true,
2379 Address(rdx_fill_ptr, 0), Address(rsi_source, 0),
2380 rbx_temp, rdi_temp);
2381 __ addptr(rsi_source, type2aelembytes(elem_type));
2382 __ cmpptr(rdx_fill_ptr, rax_argslot);
2383 __ jcc(Assembler::above, loop);
2384 } else if (length_constant == 0) {
2385 // nothing to copy
2386 } else {
2387 int elem_offset = elem0_offset;
2388 int slot_offset = length_constant * Interpreter::stackElementSize;
2389 for (int index = 0; index < length_constant; index++) {
2390 slot_offset -= Interpreter::stackElementSize * elem_slots; // fill backward
2391 move_typed_arg(_masm, elem_type, true,
2392 Address(rax_argslot, slot_offset), Address(rsi_array, elem_offset),
2393 rbx_temp, rdi_temp);
2394 elem_offset += type2aelembytes(elem_type);
2395 }
2396 }
2397 __ BIND(L_args_done);
2399 // Arguments are spread. Move to next method handle.
2400 UNPUSH_RSI;
2401 __ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
2402 __ jump_to_method_handle_entry(rcx_recv, rdx_temp);
2404 __ bind(bad_array_klass);
2405 UNPUSH_RSI;
2406 assert(!vmarg.uses(rarg2_required), "must be different registers");
2407 __ load_heap_oop( rarg2_required, Address(rdx_array_klass, java_mirror_offset)); // required type
2408 __ movptr( rarg1_actual, vmarg); // bad array
2409 __ movl( rarg0_code, (int) Bytecodes::_aaload); // who is complaining?
2410 __ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
2412 __ bind(bad_array_length);
2413 UNPUSH_RSI;
2414 assert(!vmarg.uses(rarg2_required), "must be different registers");
2415 __ mov( rarg2_required, rcx_recv); // AMH requiring a certain length
2416 __ movptr( rarg1_actual, vmarg); // bad array
2417 __ movl( rarg0_code, (int) Bytecodes::_arraylength); // who is complaining?
2418 __ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
2419 #undef UNPUSH_RSI
2421 break;
2422 }
2424 default:
2425 // do not require all platforms to recognize all adapter types
2426 __ nop();
2427 return;
2428 }
2429 BLOCK_COMMENT(err_msg("} Entry %s", entry_name(ek)));
2430 __ hlt();
2432 address me_cookie = MethodHandleEntry::start_compiled_entry(_masm, interp_entry);
2433 __ unimplemented(entry_name(ek)); // %%% FIXME: NYI
2435 init_entry(ek, MethodHandleEntry::finish_compiled_entry(_masm, me_cookie));
2436 }