Fri, 07 Jan 2011 10:42:32 -0500
7003271: Hotspot should track cumulative Java heap bytes allocated on a per-thread basis
Summary: Track allocated bytes in Thread's, update on TLAB retirement and direct allocation in Eden and tenured, add JNI methods for ThreadMXBean.
Reviewed-by: coleenp, kvn, dholmes, ysr
1 /*
2 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/assembler.hpp"
27 #include "interpreter/bytecodeHistogram.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "interpreter/interpreterGenerator.hpp"
30 #include "interpreter/interpreterRuntime.hpp"
31 #include "interpreter/templateTable.hpp"
32 #include "oops/arrayOop.hpp"
33 #include "oops/methodDataOop.hpp"
34 #include "oops/methodOop.hpp"
35 #include "oops/oop.inline.hpp"
36 #include "prims/jvmtiExport.hpp"
37 #include "prims/jvmtiThreadState.hpp"
38 #include "runtime/arguments.hpp"
39 #include "runtime/deoptimization.hpp"
40 #include "runtime/frame.inline.hpp"
41 #include "runtime/sharedRuntime.hpp"
42 #include "runtime/stubRoutines.hpp"
43 #include "runtime/synchronizer.hpp"
44 #include "runtime/timer.hpp"
45 #include "runtime/vframeArray.hpp"
46 #include "utilities/debug.hpp"
48 #define __ _masm->
50 #ifndef CC_INTERP
52 const int method_offset = frame::interpreter_frame_method_offset * wordSize;
53 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize;
54 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize;
56 //-----------------------------------------------------------------------------
58 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
59 address entry = __ pc();
61 #ifdef ASSERT
62 {
63 Label L;
64 __ lea(rax, Address(rbp,
65 frame::interpreter_frame_monitor_block_top_offset *
66 wordSize));
67 __ cmpptr(rax, rsp); // rax = maximal rsp for current rbp (stack
68 // grows negative)
69 __ jcc(Assembler::aboveEqual, L); // check if frame is complete
70 __ stop ("interpreter frame not set up");
71 __ bind(L);
72 }
73 #endif // ASSERT
74 // Restore bcp under the assumption that the current frame is still
75 // interpreted
76 __ restore_bcp();
78 // expression stack must be empty before entering the VM if an
79 // exception happened
80 __ empty_expression_stack();
81 // throw exception
82 __ call_VM(noreg,
83 CAST_FROM_FN_PTR(address,
84 InterpreterRuntime::throw_StackOverflowError));
85 return entry;
86 }
88 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(
89 const char* name) {
90 address entry = __ pc();
91 // expression stack must be empty before entering the VM if an
92 // exception happened
93 __ empty_expression_stack();
94 // setup parameters
95 // ??? convention: expect aberrant index in register ebx
96 __ lea(c_rarg1, ExternalAddress((address)name));
97 __ call_VM(noreg,
98 CAST_FROM_FN_PTR(address,
99 InterpreterRuntime::
100 throw_ArrayIndexOutOfBoundsException),
101 c_rarg1, rbx);
102 return entry;
103 }
105 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
106 address entry = __ pc();
108 // object is at TOS
109 __ pop(c_rarg1);
111 // expression stack must be empty before entering the VM if an
112 // exception happened
113 __ empty_expression_stack();
115 __ call_VM(noreg,
116 CAST_FROM_FN_PTR(address,
117 InterpreterRuntime::
118 throw_ClassCastException),
119 c_rarg1);
120 return entry;
121 }
123 // Arguments are: required type at TOS+8, failing object (or NULL) at TOS+4.
124 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
125 address entry = __ pc();
127 __ pop(c_rarg2); // failing object is at TOS
128 __ pop(c_rarg1); // required type is at TOS+8
130 __ verify_oop(c_rarg1);
131 __ verify_oop(c_rarg2);
133 // Various method handle types use interpreter registers as temps.
134 __ restore_bcp();
135 __ restore_locals();
137 // Expression stack must be empty before entering the VM for an exception.
138 __ empty_expression_stack();
140 __ call_VM(noreg,
141 CAST_FROM_FN_PTR(address,
142 InterpreterRuntime::throw_WrongMethodTypeException),
143 // pass required type, failing object (or NULL)
144 c_rarg1, c_rarg2);
145 return entry;
146 }
148 address TemplateInterpreterGenerator::generate_exception_handler_common(
149 const char* name, const char* message, bool pass_oop) {
150 assert(!pass_oop || message == NULL, "either oop or message but not both");
151 address entry = __ pc();
152 if (pass_oop) {
153 // object is at TOS
154 __ pop(c_rarg2);
155 }
156 // expression stack must be empty before entering the VM if an
157 // exception happened
158 __ empty_expression_stack();
159 // setup parameters
160 __ lea(c_rarg1, ExternalAddress((address)name));
161 if (pass_oop) {
162 __ call_VM(rax, CAST_FROM_FN_PTR(address,
163 InterpreterRuntime::
164 create_klass_exception),
165 c_rarg1, c_rarg2);
166 } else {
167 // kind of lame ExternalAddress can't take NULL because
168 // external_word_Relocation will assert.
169 if (message != NULL) {
170 __ lea(c_rarg2, ExternalAddress((address)message));
171 } else {
172 __ movptr(c_rarg2, NULL_WORD);
173 }
174 __ call_VM(rax,
175 CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception),
176 c_rarg1, c_rarg2);
177 }
178 // throw exception
179 __ jump(ExternalAddress(Interpreter::throw_exception_entry()));
180 return entry;
181 }
184 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
185 address entry = __ pc();
186 // NULL last_sp until next java call
187 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
188 __ dispatch_next(state);
189 return entry;
190 }
193 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state,
194 int step) {
196 // amd64 doesn't need to do anything special about compiled returns
197 // to the interpreter so the code that exists on x86 to place a sentinel
198 // here and the specialized cleanup code is not needed here.
200 address entry = __ pc();
202 // Restore stack bottom in case i2c adjusted stack
203 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
204 // and NULL it as marker that esp is now tos until next java call
205 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
207 __ restore_bcp();
208 __ restore_locals();
210 Label L_got_cache, L_giant_index;
211 if (EnableInvokeDynamic) {
212 __ cmpb(Address(r13, 0), Bytecodes::_invokedynamic);
213 __ jcc(Assembler::equal, L_giant_index);
214 }
215 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u2));
216 __ bind(L_got_cache);
217 __ movl(rbx, Address(rbx, rcx,
218 Address::times_ptr,
219 in_bytes(constantPoolCacheOopDesc::base_offset()) +
220 3 * wordSize));
221 __ andl(rbx, 0xFF);
222 __ lea(rsp, Address(rsp, rbx, Address::times_8));
223 __ dispatch_next(state, step);
225 // out of the main line of code...
226 if (EnableInvokeDynamic) {
227 __ bind(L_giant_index);
228 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u4));
229 __ jmp(L_got_cache);
230 }
232 return entry;
233 }
236 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state,
237 int step) {
238 address entry = __ pc();
239 // NULL last_sp until next java call
240 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
241 __ restore_bcp();
242 __ restore_locals();
243 // handle exceptions
244 {
245 Label L;
246 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
247 __ jcc(Assembler::zero, L);
248 __ call_VM(noreg,
249 CAST_FROM_FN_PTR(address,
250 InterpreterRuntime::throw_pending_exception));
251 __ should_not_reach_here();
252 __ bind(L);
253 }
254 __ dispatch_next(state, step);
255 return entry;
256 }
258 int AbstractInterpreter::BasicType_as_index(BasicType type) {
259 int i = 0;
260 switch (type) {
261 case T_BOOLEAN: i = 0; break;
262 case T_CHAR : i = 1; break;
263 case T_BYTE : i = 2; break;
264 case T_SHORT : i = 3; break;
265 case T_INT : i = 4; break;
266 case T_LONG : i = 5; break;
267 case T_VOID : i = 6; break;
268 case T_FLOAT : i = 7; break;
269 case T_DOUBLE : i = 8; break;
270 case T_OBJECT : i = 9; break;
271 case T_ARRAY : i = 9; break;
272 default : ShouldNotReachHere();
273 }
274 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers,
275 "index out of bounds");
276 return i;
277 }
280 address TemplateInterpreterGenerator::generate_result_handler_for(
281 BasicType type) {
282 address entry = __ pc();
283 switch (type) {
284 case T_BOOLEAN: __ c2bool(rax); break;
285 case T_CHAR : __ movzwl(rax, rax); break;
286 case T_BYTE : __ sign_extend_byte(rax); break;
287 case T_SHORT : __ sign_extend_short(rax); break;
288 case T_INT : /* nothing to do */ break;
289 case T_LONG : /* nothing to do */ break;
290 case T_VOID : /* nothing to do */ break;
291 case T_FLOAT : /* nothing to do */ break;
292 case T_DOUBLE : /* nothing to do */ break;
293 case T_OBJECT :
294 // retrieve result from frame
295 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize));
296 // and verify it
297 __ verify_oop(rax);
298 break;
299 default : ShouldNotReachHere();
300 }
301 __ ret(0); // return from result handler
302 return entry;
303 }
305 address TemplateInterpreterGenerator::generate_safept_entry_for(
306 TosState state,
307 address runtime_entry) {
308 address entry = __ pc();
309 __ push(state);
310 __ call_VM(noreg, runtime_entry);
311 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos));
312 return entry;
313 }
317 // Helpers for commoning out cases in the various type of method entries.
318 //
321 // increment invocation count & check for overflow
322 //
323 // Note: checking for negative value instead of overflow
324 // so we have a 'sticky' overflow test
325 //
326 // rbx: method
327 // ecx: invocation counter
328 //
329 void InterpreterGenerator::generate_counter_incr(
330 Label* overflow,
331 Label* profile_method,
332 Label* profile_method_continue) {
333 const Address invocation_counter(rbx, in_bytes(methodOopDesc::invocation_counter_offset()) +
334 in_bytes(InvocationCounter::counter_offset()));
335 // Note: In tiered we increment either counters in methodOop or in MDO depending if we're profiling or not.
336 if (TieredCompilation) {
337 int increment = InvocationCounter::count_increment;
338 int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift;
339 Label no_mdo, done;
340 if (ProfileInterpreter) {
341 // Are we profiling?
342 __ movptr(rax, Address(rbx, methodOopDesc::method_data_offset()));
343 __ testptr(rax, rax);
344 __ jccb(Assembler::zero, no_mdo);
345 // Increment counter in the MDO
346 const Address mdo_invocation_counter(rax, in_bytes(methodDataOopDesc::invocation_counter_offset()) +
347 in_bytes(InvocationCounter::counter_offset()));
348 __ increment_mask_and_jump(mdo_invocation_counter, increment, mask, rcx, false, Assembler::zero, overflow);
349 __ jmpb(done);
350 }
351 __ bind(no_mdo);
352 // Increment counter in methodOop (we don't need to load it, it's in ecx).
353 __ increment_mask_and_jump(invocation_counter, increment, mask, rcx, true, Assembler::zero, overflow);
354 __ bind(done);
355 } else {
356 const Address backedge_counter(rbx,
357 methodOopDesc::backedge_counter_offset() +
358 InvocationCounter::counter_offset());
360 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
361 __ incrementl(Address(rbx,
362 methodOopDesc::interpreter_invocation_counter_offset()));
363 }
364 // Update standard invocation counters
365 __ movl(rax, backedge_counter); // load backedge counter
367 __ incrementl(rcx, InvocationCounter::count_increment);
368 __ andl(rax, InvocationCounter::count_mask_value); // mask out the status bits
370 __ movl(invocation_counter, rcx); // save invocation count
371 __ addl(rcx, rax); // add both counters
373 // profile_method is non-null only for interpreted method so
374 // profile_method != NULL == !native_call
376 if (ProfileInterpreter && profile_method != NULL) {
377 // Test to see if we should create a method data oop
378 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit));
379 __ jcc(Assembler::less, *profile_method_continue);
381 // if no method data exists, go to profile_method
382 __ test_method_data_pointer(rax, *profile_method);
383 }
385 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit));
386 __ jcc(Assembler::aboveEqual, *overflow);
387 }
388 }
390 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) {
392 // Asm interpreter on entry
393 // r14 - locals
394 // r13 - bcp
395 // rbx - method
396 // edx - cpool --- DOES NOT APPEAR TO BE TRUE
397 // rbp - interpreter frame
399 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ]
400 // Everything as it was on entry
401 // rdx is not restored. Doesn't appear to really be set.
403 const Address size_of_parameters(rbx,
404 methodOopDesc::size_of_parameters_offset());
406 // InterpreterRuntime::frequency_counter_overflow takes two
407 // arguments, the first (thread) is passed by call_VM, the second
408 // indicates if the counter overflow occurs at a backwards branch
409 // (NULL bcp). We pass zero for it. The call returns the address
410 // of the verified entry point for the method or NULL if the
411 // compilation did not complete (either went background or bailed
412 // out).
413 __ movl(c_rarg1, 0);
414 __ call_VM(noreg,
415 CAST_FROM_FN_PTR(address,
416 InterpreterRuntime::frequency_counter_overflow),
417 c_rarg1);
419 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
420 // Preserve invariant that r13/r14 contain bcp/locals of sender frame
421 // and jump to the interpreted entry.
422 __ jmp(*do_continue, relocInfo::none);
423 }
425 // See if we've got enough room on the stack for locals plus overhead.
426 // The expression stack grows down incrementally, so the normal guard
427 // page mechanism will work for that.
428 //
429 // NOTE: Since the additional locals are also always pushed (wasn't
430 // obvious in generate_method_entry) so the guard should work for them
431 // too.
432 //
433 // Args:
434 // rdx: number of additional locals this frame needs (what we must check)
435 // rbx: methodOop
436 //
437 // Kills:
438 // rax
439 void InterpreterGenerator::generate_stack_overflow_check(void) {
441 // monitor entry size: see picture of stack set
442 // (generate_method_entry) and frame_amd64.hpp
443 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
445 // total overhead size: entry_size + (saved rbp through expr stack
446 // bottom). be sure to change this if you add/subtract anything
447 // to/from the overhead area
448 const int overhead_size =
449 -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size;
451 const int page_size = os::vm_page_size();
453 Label after_frame_check;
455 // see if the frame is greater than one page in size. If so,
456 // then we need to verify there is enough stack space remaining
457 // for the additional locals.
458 __ cmpl(rdx, (page_size - overhead_size) / Interpreter::stackElementSize);
459 __ jcc(Assembler::belowEqual, after_frame_check);
461 // compute rsp as if this were going to be the last frame on
462 // the stack before the red zone
464 const Address stack_base(r15_thread, Thread::stack_base_offset());
465 const Address stack_size(r15_thread, Thread::stack_size_offset());
467 // locals + overhead, in bytes
468 __ mov(rax, rdx);
469 __ shlptr(rax, Interpreter::logStackElementSize); // 2 slots per parameter.
470 __ addptr(rax, overhead_size);
472 #ifdef ASSERT
473 Label stack_base_okay, stack_size_okay;
474 // verify that thread stack base is non-zero
475 __ cmpptr(stack_base, (int32_t)NULL_WORD);
476 __ jcc(Assembler::notEqual, stack_base_okay);
477 __ stop("stack base is zero");
478 __ bind(stack_base_okay);
479 // verify that thread stack size is non-zero
480 __ cmpptr(stack_size, 0);
481 __ jcc(Assembler::notEqual, stack_size_okay);
482 __ stop("stack size is zero");
483 __ bind(stack_size_okay);
484 #endif
486 // Add stack base to locals and subtract stack size
487 __ addptr(rax, stack_base);
488 __ subptr(rax, stack_size);
490 // Use the maximum number of pages we might bang.
491 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages :
492 (StackRedPages+StackYellowPages);
494 // add in the red and yellow zone sizes
495 __ addptr(rax, max_pages * page_size);
497 // check against the current stack bottom
498 __ cmpptr(rsp, rax);
499 __ jcc(Assembler::above, after_frame_check);
501 __ pop(rax); // get return address
502 __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry()));
504 // all done with frame size check
505 __ bind(after_frame_check);
506 }
508 // Allocate monitor and lock method (asm interpreter)
509 //
510 // Args:
511 // rbx: methodOop
512 // r14: locals
513 //
514 // Kills:
515 // rax
516 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs)
517 // rscratch1, rscratch2 (scratch regs)
518 void InterpreterGenerator::lock_method(void) {
519 // synchronize method
520 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
521 const Address monitor_block_top(
522 rbp,
523 frame::interpreter_frame_monitor_block_top_offset * wordSize);
524 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
526 #ifdef ASSERT
527 {
528 Label L;
529 __ movl(rax, access_flags);
530 __ testl(rax, JVM_ACC_SYNCHRONIZED);
531 __ jcc(Assembler::notZero, L);
532 __ stop("method doesn't need synchronization");
533 __ bind(L);
534 }
535 #endif // ASSERT
537 // get synchronization object
538 {
539 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
540 Klass::java_mirror_offset_in_bytes();
541 Label done;
542 __ movl(rax, access_flags);
543 __ testl(rax, JVM_ACC_STATIC);
544 // get receiver (assume this is frequent case)
545 __ movptr(rax, Address(r14, Interpreter::local_offset_in_bytes(0)));
546 __ jcc(Assembler::zero, done);
547 __ movptr(rax, Address(rbx, methodOopDesc::constants_offset()));
548 __ movptr(rax, Address(rax,
549 constantPoolOopDesc::pool_holder_offset_in_bytes()));
550 __ movptr(rax, Address(rax, mirror_offset));
552 #ifdef ASSERT
553 {
554 Label L;
555 __ testptr(rax, rax);
556 __ jcc(Assembler::notZero, L);
557 __ stop("synchronization object is NULL");
558 __ bind(L);
559 }
560 #endif // ASSERT
562 __ bind(done);
563 }
565 // add space for monitor & lock
566 __ subptr(rsp, entry_size); // add space for a monitor entry
567 __ movptr(monitor_block_top, rsp); // set new monitor block top
568 // store object
569 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax);
570 __ movptr(c_rarg1, rsp); // object address
571 __ lock_object(c_rarg1);
572 }
574 // Generate a fixed interpreter frame. This is identical setup for
575 // interpreted methods and for native methods hence the shared code.
576 //
577 // Args:
578 // rax: return address
579 // rbx: methodOop
580 // r14: pointer to locals
581 // r13: sender sp
582 // rdx: cp cache
583 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
584 // initialize fixed part of activation frame
585 __ push(rax); // save return address
586 __ enter(); // save old & set new rbp
587 __ push(r13); // set sender sp
588 __ push((int)NULL_WORD); // leave last_sp as null
589 __ movptr(r13, Address(rbx, methodOopDesc::const_offset())); // get constMethodOop
590 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
591 __ push(rbx); // save methodOop
592 if (ProfileInterpreter) {
593 Label method_data_continue;
594 __ movptr(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
595 __ testptr(rdx, rdx);
596 __ jcc(Assembler::zero, method_data_continue);
597 __ addptr(rdx, in_bytes(methodDataOopDesc::data_offset()));
598 __ bind(method_data_continue);
599 __ push(rdx); // set the mdp (method data pointer)
600 } else {
601 __ push(0);
602 }
604 __ movptr(rdx, Address(rbx, methodOopDesc::constants_offset()));
605 __ movptr(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes()));
606 __ push(rdx); // set constant pool cache
607 __ push(r14); // set locals pointer
608 if (native_call) {
609 __ push(0); // no bcp
610 } else {
611 __ push(r13); // set bcp
612 }
613 __ push(0); // reserve word for pointer to expression stack bottom
614 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom
615 }
617 // End of helpers
619 // Various method entries
620 //------------------------------------------------------------------------------------------------------------------------
621 //
622 //
624 // Call an accessor method (assuming it is resolved, otherwise drop
625 // into vanilla (slow path) entry
626 address InterpreterGenerator::generate_accessor_entry(void) {
627 // rbx: methodOop
629 // r13: senderSP must preserver for slow path, set SP to it on fast path
631 address entry_point = __ pc();
632 Label xreturn_path;
634 // do fastpath for resolved accessor methods
635 if (UseFastAccessorMethods) {
636 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites
637 // thereof; parameter size = 1
638 // Note: We can only use this code if the getfield has been resolved
639 // and if we don't have a null-pointer exception => check for
640 // these conditions first and use slow path if necessary.
641 Label slow_path;
642 // If we need a safepoint check, generate full interpreter entry.
643 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
644 SafepointSynchronize::_not_synchronized);
646 __ jcc(Assembler::notEqual, slow_path);
647 // rbx: method
648 __ movptr(rax, Address(rsp, wordSize));
650 // check if local 0 != NULL and read field
651 __ testptr(rax, rax);
652 __ jcc(Assembler::zero, slow_path);
654 __ movptr(rdi, Address(rbx, methodOopDesc::constants_offset()));
655 // read first instruction word and extract bytecode @ 1 and index @ 2
656 __ movptr(rdx, Address(rbx, methodOopDesc::const_offset()));
657 __ movl(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
658 // Shift codes right to get the index on the right.
659 // The bytecode fetched looks like <index><0xb4><0x2a>
660 __ shrl(rdx, 2 * BitsPerByte);
661 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size())));
662 __ movptr(rdi, Address(rdi, constantPoolOopDesc::cache_offset_in_bytes()));
664 // rax: local 0
665 // rbx: method
666 // rdx: constant pool cache index
667 // rdi: constant pool cache
669 // check if getfield has been resolved and read constant pool cache entry
670 // check the validity of the cache entry by testing whether _indices field
671 // contains Bytecode::_getfield in b1 byte.
672 assert(in_words(ConstantPoolCacheEntry::size()) == 4,
673 "adjust shift below");
674 __ movl(rcx,
675 Address(rdi,
676 rdx,
677 Address::times_8,
678 constantPoolCacheOopDesc::base_offset() +
679 ConstantPoolCacheEntry::indices_offset()));
680 __ shrl(rcx, 2 * BitsPerByte);
681 __ andl(rcx, 0xFF);
682 __ cmpl(rcx, Bytecodes::_getfield);
683 __ jcc(Assembler::notEqual, slow_path);
685 // Note: constant pool entry is not valid before bytecode is resolved
686 __ movptr(rcx,
687 Address(rdi,
688 rdx,
689 Address::times_8,
690 constantPoolCacheOopDesc::base_offset() +
691 ConstantPoolCacheEntry::f2_offset()));
692 // edx: flags
693 __ movl(rdx,
694 Address(rdi,
695 rdx,
696 Address::times_8,
697 constantPoolCacheOopDesc::base_offset() +
698 ConstantPoolCacheEntry::flags_offset()));
700 Label notObj, notInt, notByte, notShort;
701 const Address field_address(rax, rcx, Address::times_1);
703 // Need to differentiate between igetfield, agetfield, bgetfield etc.
704 // because they are different sizes.
705 // Use the type from the constant pool cache
706 __ shrl(rdx, ConstantPoolCacheEntry::tosBits);
707 // Make sure we don't need to mask edx for tosBits after the above shift
708 ConstantPoolCacheEntry::verify_tosBits();
710 __ cmpl(rdx, atos);
711 __ jcc(Assembler::notEqual, notObj);
712 // atos
713 __ load_heap_oop(rax, field_address);
714 __ jmp(xreturn_path);
716 __ bind(notObj);
717 __ cmpl(rdx, itos);
718 __ jcc(Assembler::notEqual, notInt);
719 // itos
720 __ movl(rax, field_address);
721 __ jmp(xreturn_path);
723 __ bind(notInt);
724 __ cmpl(rdx, btos);
725 __ jcc(Assembler::notEqual, notByte);
726 // btos
727 __ load_signed_byte(rax, field_address);
728 __ jmp(xreturn_path);
730 __ bind(notByte);
731 __ cmpl(rdx, stos);
732 __ jcc(Assembler::notEqual, notShort);
733 // stos
734 __ load_signed_short(rax, field_address);
735 __ jmp(xreturn_path);
737 __ bind(notShort);
738 #ifdef ASSERT
739 Label okay;
740 __ cmpl(rdx, ctos);
741 __ jcc(Assembler::equal, okay);
742 __ stop("what type is this?");
743 __ bind(okay);
744 #endif
745 // ctos
746 __ load_unsigned_short(rax, field_address);
748 __ bind(xreturn_path);
750 // _ireturn/_areturn
751 __ pop(rdi);
752 __ mov(rsp, r13);
753 __ jmp(rdi);
754 __ ret(0);
756 // generate a vanilla interpreter entry as the slow path
757 __ bind(slow_path);
758 (void) generate_normal_entry(false);
759 } else {
760 (void) generate_normal_entry(false);
761 }
763 return entry_point;
764 }
766 // Interpreter stub for calling a native method. (asm interpreter)
767 // This sets up a somewhat different looking stack for calling the
768 // native method than the typical interpreter frame setup.
769 address InterpreterGenerator::generate_native_entry(bool synchronized) {
770 // determine code generation flags
771 bool inc_counter = UseCompiler || CountCompiledCalls;
773 // rbx: methodOop
774 // r13: sender sp
776 address entry_point = __ pc();
778 const Address size_of_parameters(rbx, methodOopDesc::
779 size_of_parameters_offset());
780 const Address invocation_counter(rbx, methodOopDesc::
781 invocation_counter_offset() +
782 InvocationCounter::counter_offset());
783 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
785 // get parameter size (always needed)
786 __ load_unsigned_short(rcx, size_of_parameters);
788 // native calls don't need the stack size check since they have no
789 // expression stack and the arguments are already on the stack and
790 // we only add a handful of words to the stack
792 // rbx: methodOop
793 // rcx: size of parameters
794 // r13: sender sp
795 __ pop(rax); // get return address
797 // for natives the size of locals is zero
799 // compute beginning of parameters (r14)
800 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
802 // add 2 zero-initialized slots for native calls
803 // initialize result_handler slot
804 __ push((int) NULL_WORD);
805 // slot for oop temp
806 // (static native method holder mirror/jni oop result)
807 __ push((int) NULL_WORD);
809 if (inc_counter) {
810 __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
811 }
813 // initialize fixed part of activation frame
814 generate_fixed_frame(true);
816 // make sure method is native & not abstract
817 #ifdef ASSERT
818 __ movl(rax, access_flags);
819 {
820 Label L;
821 __ testl(rax, JVM_ACC_NATIVE);
822 __ jcc(Assembler::notZero, L);
823 __ stop("tried to execute non-native method as native");
824 __ bind(L);
825 }
826 {
827 Label L;
828 __ testl(rax, JVM_ACC_ABSTRACT);
829 __ jcc(Assembler::zero, L);
830 __ stop("tried to execute abstract method in interpreter");
831 __ bind(L);
832 }
833 #endif
835 // Since at this point in the method invocation the exception handler
836 // would try to exit the monitor of synchronized methods which hasn't
837 // been entered yet, we set the thread local variable
838 // _do_not_unlock_if_synchronized to true. The remove_activation will
839 // check this flag.
841 const Address do_not_unlock_if_synchronized(r15_thread,
842 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
843 __ movbool(do_not_unlock_if_synchronized, true);
845 // increment invocation count & check for overflow
846 Label invocation_counter_overflow;
847 if (inc_counter) {
848 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
849 }
851 Label continue_after_compile;
852 __ bind(continue_after_compile);
854 bang_stack_shadow_pages(true);
856 // reset the _do_not_unlock_if_synchronized flag
857 __ movbool(do_not_unlock_if_synchronized, false);
859 // check for synchronized methods
860 // Must happen AFTER invocation_counter check and stack overflow check,
861 // so method is not locked if overflows.
862 if (synchronized) {
863 lock_method();
864 } else {
865 // no synchronization necessary
866 #ifdef ASSERT
867 {
868 Label L;
869 __ movl(rax, access_flags);
870 __ testl(rax, JVM_ACC_SYNCHRONIZED);
871 __ jcc(Assembler::zero, L);
872 __ stop("method needs synchronization");
873 __ bind(L);
874 }
875 #endif
876 }
878 // start execution
879 #ifdef ASSERT
880 {
881 Label L;
882 const Address monitor_block_top(rbp,
883 frame::interpreter_frame_monitor_block_top_offset * wordSize);
884 __ movptr(rax, monitor_block_top);
885 __ cmpptr(rax, rsp);
886 __ jcc(Assembler::equal, L);
887 __ stop("broken stack frame setup in interpreter");
888 __ bind(L);
889 }
890 #endif
892 // jvmti support
893 __ notify_method_entry();
895 // work registers
896 const Register method = rbx;
897 const Register t = r11;
899 // allocate space for parameters
900 __ get_method(method);
901 __ verify_oop(method);
902 __ load_unsigned_short(t,
903 Address(method,
904 methodOopDesc::size_of_parameters_offset()));
905 __ shll(t, Interpreter::logStackElementSize);
907 __ subptr(rsp, t);
908 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
909 __ andptr(rsp, -16); // must be 16 byte boundary (see amd64 ABI)
911 // get signature handler
912 {
913 Label L;
914 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
915 __ testptr(t, t);
916 __ jcc(Assembler::notZero, L);
917 __ call_VM(noreg,
918 CAST_FROM_FN_PTR(address,
919 InterpreterRuntime::prepare_native_call),
920 method);
921 __ get_method(method);
922 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
923 __ bind(L);
924 }
926 // call signature handler
927 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == r14,
928 "adjust this code");
929 assert(InterpreterRuntime::SignatureHandlerGenerator::to() == rsp,
930 "adjust this code");
931 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == rscratch1,
932 "adjust this code");
934 // The generated handlers do not touch RBX (the method oop).
935 // However, large signatures cannot be cached and are generated
936 // each time here. The slow-path generator can do a GC on return,
937 // so we must reload it after the call.
938 __ call(t);
939 __ get_method(method); // slow path can do a GC, reload RBX
942 // result handler is in rax
943 // set result handler
944 __ movptr(Address(rbp,
945 (frame::interpreter_frame_result_handler_offset) * wordSize),
946 rax);
948 // pass mirror handle if static call
949 {
950 Label L;
951 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
952 Klass::java_mirror_offset_in_bytes();
953 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
954 __ testl(t, JVM_ACC_STATIC);
955 __ jcc(Assembler::zero, L);
956 // get mirror
957 __ movptr(t, Address(method, methodOopDesc::constants_offset()));
958 __ movptr(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes()));
959 __ movptr(t, Address(t, mirror_offset));
960 // copy mirror into activation frame
961 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize),
962 t);
963 // pass handle to mirror
964 __ lea(c_rarg1,
965 Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize));
966 __ bind(L);
967 }
969 // get native function entry point
970 {
971 Label L;
972 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
973 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry());
974 __ movptr(rscratch2, unsatisfied.addr());
975 __ cmpptr(rax, rscratch2);
976 __ jcc(Assembler::notEqual, L);
977 __ call_VM(noreg,
978 CAST_FROM_FN_PTR(address,
979 InterpreterRuntime::prepare_native_call),
980 method);
981 __ get_method(method);
982 __ verify_oop(method);
983 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
984 __ bind(L);
985 }
987 // pass JNIEnv
988 __ lea(c_rarg0, Address(r15_thread, JavaThread::jni_environment_offset()));
990 // It is enough that the pc() points into the right code
991 // segment. It does not have to be the correct return pc.
992 __ set_last_Java_frame(rsp, rbp, (address) __ pc());
994 // change thread state
995 #ifdef ASSERT
996 {
997 Label L;
998 __ movl(t, Address(r15_thread, JavaThread::thread_state_offset()));
999 __ cmpl(t, _thread_in_Java);
1000 __ jcc(Assembler::equal, L);
1001 __ stop("Wrong thread state in native stub");
1002 __ bind(L);
1003 }
1004 #endif
1006 // Change state to native
1008 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1009 _thread_in_native);
1011 // Call the native method.
1012 __ call(rax);
1013 // result potentially in rax or xmm0
1015 // Depending on runtime options, either restore the MXCSR
1016 // register after returning from the JNI Call or verify that
1017 // it wasn't changed during -Xcheck:jni.
1018 if (RestoreMXCSROnJNICalls) {
1019 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
1020 }
1021 else if (CheckJNICalls) {
1022 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::x86::verify_mxcsr_entry())));
1023 }
1025 // NOTE: The order of these pushes is known to frame::interpreter_frame_result
1026 // in order to extract the result of a method call. If the order of these
1027 // pushes change or anything else is added to the stack then the code in
1028 // interpreter_frame_result must also change.
1030 __ push(dtos);
1031 __ push(ltos);
1033 // change thread state
1034 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1035 _thread_in_native_trans);
1037 if (os::is_MP()) {
1038 if (UseMembar) {
1039 // Force this write out before the read below
1040 __ membar(Assembler::Membar_mask_bits(
1041 Assembler::LoadLoad | Assembler::LoadStore |
1042 Assembler::StoreLoad | Assembler::StoreStore));
1043 } else {
1044 // Write serialization page so VM thread can do a pseudo remote membar.
1045 // We use the current thread pointer to calculate a thread specific
1046 // offset to write to within the page. This minimizes bus traffic
1047 // due to cache line collision.
1048 __ serialize_memory(r15_thread, rscratch2);
1049 }
1050 }
1052 // check for safepoint operation in progress and/or pending suspend requests
1053 {
1054 Label Continue;
1055 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
1056 SafepointSynchronize::_not_synchronized);
1058 Label L;
1059 __ jcc(Assembler::notEqual, L);
1060 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
1061 __ jcc(Assembler::equal, Continue);
1062 __ bind(L);
1064 // Don't use call_VM as it will see a possible pending exception
1065 // and forward it and never return here preventing us from
1066 // clearing _last_native_pc down below. Also can't use
1067 // call_VM_leaf either as it will check to see if r13 & r14 are
1068 // preserved and correspond to the bcp/locals pointers. So we do a
1069 // runtime call by hand.
1070 //
1071 __ mov(c_rarg0, r15_thread);
1072 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1073 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1074 __ andptr(rsp, -16); // align stack as required by ABI
1075 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
1076 __ mov(rsp, r12); // restore sp
1077 __ reinit_heapbase();
1078 __ bind(Continue);
1079 }
1081 // change thread state
1082 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
1084 // reset_last_Java_frame
1085 __ reset_last_Java_frame(true, true);
1087 // reset handle block
1088 __ movptr(t, Address(r15_thread, JavaThread::active_handles_offset()));
1089 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
1091 // If result is an oop unbox and store it in frame where gc will see it
1092 // and result handler will pick it up
1094 {
1095 Label no_oop, store_result;
1096 __ lea(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT)));
1097 __ cmpptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize));
1098 __ jcc(Assembler::notEqual, no_oop);
1099 // retrieve result
1100 __ pop(ltos);
1101 __ testptr(rax, rax);
1102 __ jcc(Assembler::zero, store_result);
1103 __ movptr(rax, Address(rax, 0));
1104 __ bind(store_result);
1105 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize), rax);
1106 // keep stack depth as expected by pushing oop which will eventually be discarde
1107 __ push(ltos);
1108 __ bind(no_oop);
1109 }
1112 {
1113 Label no_reguard;
1114 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()),
1115 JavaThread::stack_guard_yellow_disabled);
1116 __ jcc(Assembler::notEqual, no_reguard);
1118 __ pusha(); // XXX only save smashed registers
1119 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1120 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1121 __ andptr(rsp, -16); // align stack as required by ABI
1122 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1123 __ mov(rsp, r12); // restore sp
1124 __ popa(); // XXX only restore smashed registers
1125 __ reinit_heapbase();
1127 __ bind(no_reguard);
1128 }
1131 // The method register is junk from after the thread_in_native transition
1132 // until here. Also can't call_VM until the bcp has been
1133 // restored. Need bcp for throwing exception below so get it now.
1134 __ get_method(method);
1135 __ verify_oop(method);
1137 // restore r13 to have legal interpreter frame, i.e., bci == 0 <=>
1138 // r13 == code_base()
1139 __ movptr(r13, Address(method, methodOopDesc::const_offset())); // get constMethodOop
1140 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
1141 // handle exceptions (exception handling will handle unlocking!)
1142 {
1143 Label L;
1144 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
1145 __ jcc(Assembler::zero, L);
1146 // Note: At some point we may want to unify this with the code
1147 // used in call_VM_base(); i.e., we should use the
1148 // StubRoutines::forward_exception code. For now this doesn't work
1149 // here because the rsp is not correctly set at this point.
1150 __ MacroAssembler::call_VM(noreg,
1151 CAST_FROM_FN_PTR(address,
1152 InterpreterRuntime::throw_pending_exception));
1153 __ should_not_reach_here();
1154 __ bind(L);
1155 }
1157 // do unlocking if necessary
1158 {
1159 Label L;
1160 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1161 __ testl(t, JVM_ACC_SYNCHRONIZED);
1162 __ jcc(Assembler::zero, L);
1163 // the code below should be shared with interpreter macro
1164 // assembler implementation
1165 {
1166 Label unlock;
1167 // BasicObjectLock will be first in list, since this is a
1168 // synchronized method. However, need to check that the object
1169 // has not been unlocked by an explicit monitorexit bytecode.
1170 const Address monitor(rbp,
1171 (intptr_t)(frame::interpreter_frame_initial_sp_offset *
1172 wordSize - sizeof(BasicObjectLock)));
1174 // monitor expect in c_rarg1 for slow unlock path
1175 __ lea(c_rarg1, monitor); // address of first monitor
1177 __ movptr(t, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
1178 __ testptr(t, t);
1179 __ jcc(Assembler::notZero, unlock);
1181 // Entry already unlocked, need to throw exception
1182 __ MacroAssembler::call_VM(noreg,
1183 CAST_FROM_FN_PTR(address,
1184 InterpreterRuntime::throw_illegal_monitor_state_exception));
1185 __ should_not_reach_here();
1187 __ bind(unlock);
1188 __ unlock_object(c_rarg1);
1189 }
1190 __ bind(L);
1191 }
1193 // jvmti support
1194 // Note: This must happen _after_ handling/throwing any exceptions since
1195 // the exception handler code notifies the runtime of method exits
1196 // too. If this happens before, method entry/exit notifications are
1197 // not properly paired (was bug - gri 11/22/99).
1198 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI);
1200 // restore potential result in edx:eax, call result handler to
1201 // restore potential result in ST0 & handle result
1203 __ pop(ltos);
1204 __ pop(dtos);
1206 __ movptr(t, Address(rbp,
1207 (frame::interpreter_frame_result_handler_offset) * wordSize));
1208 __ call(t);
1210 // remove activation
1211 __ movptr(t, Address(rbp,
1212 frame::interpreter_frame_sender_sp_offset *
1213 wordSize)); // get sender sp
1214 __ leave(); // remove frame anchor
1215 __ pop(rdi); // get return address
1216 __ mov(rsp, t); // set sp to sender sp
1217 __ jmp(rdi);
1219 if (inc_counter) {
1220 // Handle overflow of counter and compile method
1221 __ bind(invocation_counter_overflow);
1222 generate_counter_overflow(&continue_after_compile);
1223 }
1225 return entry_point;
1226 }
1228 //
1229 // Generic interpreted method entry to (asm) interpreter
1230 //
1231 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1232 // determine code generation flags
1233 bool inc_counter = UseCompiler || CountCompiledCalls;
1235 // ebx: methodOop
1236 // r13: sender sp
1237 address entry_point = __ pc();
1239 const Address size_of_parameters(rbx,
1240 methodOopDesc::size_of_parameters_offset());
1241 const Address size_of_locals(rbx, methodOopDesc::size_of_locals_offset());
1242 const Address invocation_counter(rbx,
1243 methodOopDesc::invocation_counter_offset() +
1244 InvocationCounter::counter_offset());
1245 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
1247 // get parameter size (always needed)
1248 __ load_unsigned_short(rcx, size_of_parameters);
1250 // rbx: methodOop
1251 // rcx: size of parameters
1252 // r13: sender_sp (could differ from sp+wordSize if we were called via c2i )
1254 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words
1255 __ subl(rdx, rcx); // rdx = no. of additional locals
1257 // YYY
1258 // __ incrementl(rdx);
1259 // __ andl(rdx, -2);
1261 // see if we've got enough room on the stack for locals plus overhead.
1262 generate_stack_overflow_check();
1264 // get return address
1265 __ pop(rax);
1267 // compute beginning of parameters (r14)
1268 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
1270 // rdx - # of additional locals
1271 // allocate space for locals
1272 // explicitly initialize locals
1273 {
1274 Label exit, loop;
1275 __ testl(rdx, rdx);
1276 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0
1277 __ bind(loop);
1278 __ push((int) NULL_WORD); // initialize local variables
1279 __ decrementl(rdx); // until everything initialized
1280 __ jcc(Assembler::greater, loop);
1281 __ bind(exit);
1282 }
1284 // (pre-)fetch invocation count
1285 if (inc_counter) {
1286 __ movl(rcx, invocation_counter);
1287 }
1288 // initialize fixed part of activation frame
1289 generate_fixed_frame(false);
1291 // make sure method is not native & not abstract
1292 #ifdef ASSERT
1293 __ movl(rax, access_flags);
1294 {
1295 Label L;
1296 __ testl(rax, JVM_ACC_NATIVE);
1297 __ jcc(Assembler::zero, L);
1298 __ stop("tried to execute native method as non-native");
1299 __ bind(L);
1300 }
1301 {
1302 Label L;
1303 __ testl(rax, JVM_ACC_ABSTRACT);
1304 __ jcc(Assembler::zero, L);
1305 __ stop("tried to execute abstract method in interpreter");
1306 __ bind(L);
1307 }
1308 #endif
1310 // Since at this point in the method invocation the exception
1311 // handler would try to exit the monitor of synchronized methods
1312 // which hasn't been entered yet, we set the thread local variable
1313 // _do_not_unlock_if_synchronized to true. The remove_activation
1314 // will check this flag.
1316 const Address do_not_unlock_if_synchronized(r15_thread,
1317 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1318 __ movbool(do_not_unlock_if_synchronized, true);
1320 // increment invocation count & check for overflow
1321 Label invocation_counter_overflow;
1322 Label profile_method;
1323 Label profile_method_continue;
1324 if (inc_counter) {
1325 generate_counter_incr(&invocation_counter_overflow,
1326 &profile_method,
1327 &profile_method_continue);
1328 if (ProfileInterpreter) {
1329 __ bind(profile_method_continue);
1330 }
1331 }
1333 Label continue_after_compile;
1334 __ bind(continue_after_compile);
1336 // check for synchronized interpreted methods
1337 bang_stack_shadow_pages(false);
1339 // reset the _do_not_unlock_if_synchronized flag
1340 __ movbool(do_not_unlock_if_synchronized, false);
1342 // check for synchronized methods
1343 // Must happen AFTER invocation_counter check and stack overflow check,
1344 // so method is not locked if overflows.
1345 if (synchronized) {
1346 // Allocate monitor and lock method
1347 lock_method();
1348 } else {
1349 // no synchronization necessary
1350 #ifdef ASSERT
1351 {
1352 Label L;
1353 __ movl(rax, access_flags);
1354 __ testl(rax, JVM_ACC_SYNCHRONIZED);
1355 __ jcc(Assembler::zero, L);
1356 __ stop("method needs synchronization");
1357 __ bind(L);
1358 }
1359 #endif
1360 }
1362 // start execution
1363 #ifdef ASSERT
1364 {
1365 Label L;
1366 const Address monitor_block_top (rbp,
1367 frame::interpreter_frame_monitor_block_top_offset * wordSize);
1368 __ movptr(rax, monitor_block_top);
1369 __ cmpptr(rax, rsp);
1370 __ jcc(Assembler::equal, L);
1371 __ stop("broken stack frame setup in interpreter");
1372 __ bind(L);
1373 }
1374 #endif
1376 // jvmti support
1377 __ notify_method_entry();
1379 __ dispatch_next(vtos);
1381 // invocation counter overflow
1382 if (inc_counter) {
1383 if (ProfileInterpreter) {
1384 // We have decided to profile this method in the interpreter
1385 __ bind(profile_method);
1387 __ call_VM(noreg,
1388 CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method),
1389 r13, true);
1391 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
1392 __ movptr(rax, Address(rbx,
1393 in_bytes(methodOopDesc::method_data_offset())));
1394 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize),
1395 rax);
1396 __ test_method_data_pointer(rax, profile_method_continue);
1397 __ addptr(rax, in_bytes(methodDataOopDesc::data_offset()));
1398 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize),
1399 rax);
1400 __ jmp(profile_method_continue);
1401 }
1402 // Handle overflow of counter and compile method
1403 __ bind(invocation_counter_overflow);
1404 generate_counter_overflow(&continue_after_compile);
1405 }
1407 return entry_point;
1408 }
1410 // Entry points
1411 //
1412 // Here we generate the various kind of entries into the interpreter.
1413 // The two main entry type are generic bytecode methods and native
1414 // call method. These both come in synchronized and non-synchronized
1415 // versions but the frame layout they create is very similar. The
1416 // other method entry types are really just special purpose entries
1417 // that are really entry and interpretation all in one. These are for
1418 // trivial methods like accessor, empty, or special math methods.
1419 //
1420 // When control flow reaches any of the entry types for the interpreter
1421 // the following holds ->
1422 //
1423 // Arguments:
1424 //
1425 // rbx: methodOop
1426 //
1427 // Stack layout immediately at entry
1428 //
1429 // [ return address ] <--- rsp
1430 // [ parameter n ]
1431 // ...
1432 // [ parameter 1 ]
1433 // [ expression stack ] (caller's java expression stack)
1435 // Assuming that we don't go to one of the trivial specialized entries
1436 // the stack will look like below when we are ready to execute the
1437 // first bytecode (or call the native routine). The register usage
1438 // will be as the template based interpreter expects (see
1439 // interpreter_amd64.hpp).
1440 //
1441 // local variables follow incoming parameters immediately; i.e.
1442 // the return address is moved to the end of the locals).
1443 //
1444 // [ monitor entry ] <--- rsp
1445 // ...
1446 // [ monitor entry ]
1447 // [ expr. stack bottom ]
1448 // [ saved r13 ]
1449 // [ current r14 ]
1450 // [ methodOop ]
1451 // [ saved ebp ] <--- rbp
1452 // [ return address ]
1453 // [ local variable m ]
1454 // ...
1455 // [ local variable 1 ]
1456 // [ parameter n ]
1457 // ...
1458 // [ parameter 1 ] <--- r14
1460 address AbstractInterpreterGenerator::generate_method_entry(
1461 AbstractInterpreter::MethodKind kind) {
1462 // determine code generation flags
1463 bool synchronized = false;
1464 address entry_point = NULL;
1466 switch (kind) {
1467 case Interpreter::zerolocals : break;
1468 case Interpreter::zerolocals_synchronized: synchronized = true; break;
1469 case Interpreter::native : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(false); break;
1470 case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(true); break;
1471 case Interpreter::empty : entry_point = ((InterpreterGenerator*) this)->generate_empty_entry(); break;
1472 case Interpreter::accessor : entry_point = ((InterpreterGenerator*) this)->generate_accessor_entry(); break;
1473 case Interpreter::abstract : entry_point = ((InterpreterGenerator*) this)->generate_abstract_entry(); break;
1474 case Interpreter::method_handle : entry_point = ((InterpreterGenerator*) this)->generate_method_handle_entry();break;
1476 case Interpreter::java_lang_math_sin : // fall thru
1477 case Interpreter::java_lang_math_cos : // fall thru
1478 case Interpreter::java_lang_math_tan : // fall thru
1479 case Interpreter::java_lang_math_abs : // fall thru
1480 case Interpreter::java_lang_math_log : // fall thru
1481 case Interpreter::java_lang_math_log10 : // fall thru
1482 case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*) this)->generate_math_entry(kind); break;
1483 default : ShouldNotReachHere(); break;
1484 }
1486 if (entry_point) {
1487 return entry_point;
1488 }
1490 return ((InterpreterGenerator*) this)->
1491 generate_normal_entry(synchronized);
1492 }
1494 // These should never be compiled since the interpreter will prefer
1495 // the compiled version to the intrinsic version.
1496 bool AbstractInterpreter::can_be_compiled(methodHandle m) {
1497 switch (method_kind(m)) {
1498 case Interpreter::java_lang_math_sin : // fall thru
1499 case Interpreter::java_lang_math_cos : // fall thru
1500 case Interpreter::java_lang_math_tan : // fall thru
1501 case Interpreter::java_lang_math_abs : // fall thru
1502 case Interpreter::java_lang_math_log : // fall thru
1503 case Interpreter::java_lang_math_log10 : // fall thru
1504 case Interpreter::java_lang_math_sqrt :
1505 return false;
1506 default:
1507 return true;
1508 }
1509 }
1511 // How much stack a method activation needs in words.
1512 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1513 const int entry_size = frame::interpreter_frame_monitor_size();
1515 // total overhead size: entry_size + (saved rbp thru expr stack
1516 // bottom). be sure to change this if you add/subtract anything
1517 // to/from the overhead area
1518 const int overhead_size =
1519 -(frame::interpreter_frame_initial_sp_offset) + entry_size;
1521 const int stub_code = frame::entry_frame_after_call_words;
1522 const int extra_stack = methodOopDesc::extra_stack_entries();
1523 const int method_stack = (method->max_locals() + method->max_stack() + extra_stack) *
1524 Interpreter::stackElementWords;
1525 return (overhead_size + method_stack + stub_code);
1526 }
1528 int AbstractInterpreter::layout_activation(methodOop method,
1529 int tempcount,
1530 int popframe_extra_args,
1531 int moncount,
1532 int callee_param_count,
1533 int callee_locals,
1534 frame* caller,
1535 frame* interpreter_frame,
1536 bool is_top_frame) {
1537 // Note: This calculation must exactly parallel the frame setup
1538 // in AbstractInterpreterGenerator::generate_method_entry.
1539 // If interpreter_frame!=NULL, set up the method, locals, and monitors.
1540 // The frame interpreter_frame, if not NULL, is guaranteed to be the
1541 // right size, as determined by a previous call to this method.
1542 // It is also guaranteed to be walkable even though it is in a skeletal state
1544 // fixed size of an interpreter frame:
1545 int max_locals = method->max_locals() * Interpreter::stackElementWords;
1546 int extra_locals = (method->max_locals() - method->size_of_parameters()) *
1547 Interpreter::stackElementWords;
1549 int overhead = frame::sender_sp_offset -
1550 frame::interpreter_frame_initial_sp_offset;
1551 // Our locals were accounted for by the caller (or last_frame_adjust
1552 // on the transistion) Since the callee parameters already account
1553 // for the callee's params we only need to account for the extra
1554 // locals.
1555 int size = overhead +
1556 (callee_locals - callee_param_count)*Interpreter::stackElementWords +
1557 moncount * frame::interpreter_frame_monitor_size() +
1558 tempcount* Interpreter::stackElementWords + popframe_extra_args;
1559 if (interpreter_frame != NULL) {
1560 #ifdef ASSERT
1561 if (!EnableMethodHandles)
1562 // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences?
1563 // Probably, since deoptimization doesn't work yet.
1564 assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1565 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)");
1566 #endif
1568 interpreter_frame->interpreter_frame_set_method(method);
1569 // NOTE the difference in using sender_sp and
1570 // interpreter_frame_sender_sp interpreter_frame_sender_sp is
1571 // the original sp of the caller (the unextended_sp) and
1572 // sender_sp is fp+16 XXX
1573 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1;
1575 interpreter_frame->interpreter_frame_set_locals(locals);
1576 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin();
1577 BasicObjectLock* monbot = montop - moncount;
1578 interpreter_frame->interpreter_frame_set_monitor_end(monbot);
1580 // Set last_sp
1581 intptr_t* esp = (intptr_t*) monbot -
1582 tempcount*Interpreter::stackElementWords -
1583 popframe_extra_args;
1584 interpreter_frame->interpreter_frame_set_last_sp(esp);
1586 // All frames but the initial (oldest) interpreter frame we fill in have
1587 // a value for sender_sp that allows walking the stack but isn't
1588 // truly correct. Correct the value here.
1589 if (extra_locals != 0 &&
1590 interpreter_frame->sender_sp() ==
1591 interpreter_frame->interpreter_frame_sender_sp()) {
1592 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() +
1593 extra_locals);
1594 }
1595 *interpreter_frame->interpreter_frame_cache_addr() =
1596 method->constants()->cache();
1597 }
1598 return size;
1599 }
1601 //-----------------------------------------------------------------------------
1602 // Exceptions
1604 void TemplateInterpreterGenerator::generate_throw_exception() {
1605 // Entry point in previous activation (i.e., if the caller was
1606 // interpreted)
1607 Interpreter::_rethrow_exception_entry = __ pc();
1608 // Restore sp to interpreter_frame_last_sp even though we are going
1609 // to empty the expression stack for the exception processing.
1610 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1611 // rax: exception
1612 // rdx: return address/pc that threw exception
1613 __ restore_bcp(); // r13 points to call/send
1614 __ restore_locals();
1615 __ reinit_heapbase(); // restore r12 as heapbase.
1616 // Entry point for exceptions thrown within interpreter code
1617 Interpreter::_throw_exception_entry = __ pc();
1618 // expression stack is undefined here
1619 // rax: exception
1620 // r13: exception bcp
1621 __ verify_oop(rax);
1622 __ mov(c_rarg1, rax);
1624 // expression stack must be empty before entering the VM in case of
1625 // an exception
1626 __ empty_expression_stack();
1627 // find exception handler address and preserve exception oop
1628 __ call_VM(rdx,
1629 CAST_FROM_FN_PTR(address,
1630 InterpreterRuntime::exception_handler_for_exception),
1631 c_rarg1);
1632 // rax: exception handler entry point
1633 // rdx: preserved exception oop
1634 // r13: bcp for exception handler
1635 __ push_ptr(rdx); // push exception which is now the only value on the stack
1636 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!)
1638 // If the exception is not handled in the current frame the frame is
1639 // removed and the exception is rethrown (i.e. exception
1640 // continuation is _rethrow_exception).
1641 //
1642 // Note: At this point the bci is still the bxi for the instruction
1643 // which caused the exception and the expression stack is
1644 // empty. Thus, for any VM calls at this point, GC will find a legal
1645 // oop map (with empty expression stack).
1647 // In current activation
1648 // tos: exception
1649 // esi: exception bcp
1651 //
1652 // JVMTI PopFrame support
1653 //
1655 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1656 __ empty_expression_stack();
1657 // Set the popframe_processing bit in pending_popframe_condition
1658 // indicating that we are currently handling popframe, so that
1659 // call_VMs that may happen later do not trigger new popframe
1660 // handling cycles.
1661 __ movl(rdx, Address(r15_thread, JavaThread::popframe_condition_offset()));
1662 __ orl(rdx, JavaThread::popframe_processing_bit);
1663 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), rdx);
1665 {
1666 // Check to see whether we are returning to a deoptimized frame.
1667 // (The PopFrame call ensures that the caller of the popped frame is
1668 // either interpreted or compiled and deoptimizes it if compiled.)
1669 // In this case, we can't call dispatch_next() after the frame is
1670 // popped, but instead must save the incoming arguments and restore
1671 // them after deoptimization has occurred.
1672 //
1673 // Note that we don't compare the return PC against the
1674 // deoptimization blob's unpack entry because of the presence of
1675 // adapter frames in C2.
1676 Label caller_not_deoptimized;
1677 __ movptr(c_rarg1, Address(rbp, frame::return_addr_offset * wordSize));
1678 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1679 InterpreterRuntime::interpreter_contains), c_rarg1);
1680 __ testl(rax, rax);
1681 __ jcc(Assembler::notZero, caller_not_deoptimized);
1683 // Compute size of arguments for saving when returning to
1684 // deoptimized caller
1685 __ get_method(rax);
1686 __ load_unsigned_short(rax, Address(rax, in_bytes(methodOopDesc::
1687 size_of_parameters_offset())));
1688 __ shll(rax, Interpreter::logStackElementSize);
1689 __ restore_locals(); // XXX do we need this?
1690 __ subptr(r14, rax);
1691 __ addptr(r14, wordSize);
1692 // Save these arguments
1693 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1694 Deoptimization::
1695 popframe_preserve_args),
1696 r15_thread, rax, r14);
1698 __ remove_activation(vtos, rdx,
1699 /* throw_monitor_exception */ false,
1700 /* install_monitor_exception */ false,
1701 /* notify_jvmdi */ false);
1703 // Inform deoptimization that it is responsible for restoring
1704 // these arguments
1705 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1706 JavaThread::popframe_force_deopt_reexecution_bit);
1708 // Continue in deoptimization handler
1709 __ jmp(rdx);
1711 __ bind(caller_not_deoptimized);
1712 }
1714 __ remove_activation(vtos, rdx, /* rdx result (retaddr) is not used */
1715 /* throw_monitor_exception */ false,
1716 /* install_monitor_exception */ false,
1717 /* notify_jvmdi */ false);
1719 // Finish with popframe handling
1720 // A previous I2C followed by a deoptimization might have moved the
1721 // outgoing arguments further up the stack. PopFrame expects the
1722 // mutations to those outgoing arguments to be preserved and other
1723 // constraints basically require this frame to look exactly as
1724 // though it had previously invoked an interpreted activation with
1725 // no space between the top of the expression stack (current
1726 // last_sp) and the top of stack. Rather than force deopt to
1727 // maintain this kind of invariant all the time we call a small
1728 // fixup routine to move the mutated arguments onto the top of our
1729 // expression stack if necessary.
1730 __ mov(c_rarg1, rsp);
1731 __ movptr(c_rarg2, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1732 // PC must point into interpreter here
1733 __ set_last_Java_frame(noreg, rbp, __ pc());
1734 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), r15_thread, c_rarg1, c_rarg2);
1735 __ reset_last_Java_frame(true, true);
1736 // Restore the last_sp and null it out
1737 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1738 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1740 __ restore_bcp(); // XXX do we need this?
1741 __ restore_locals(); // XXX do we need this?
1742 // The method data pointer was incremented already during
1743 // call profiling. We have to restore the mdp for the current bcp.
1744 if (ProfileInterpreter) {
1745 __ set_method_data_pointer_for_bcp();
1746 }
1748 // Clear the popframe condition flag
1749 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1750 JavaThread::popframe_inactive);
1752 __ dispatch_next(vtos);
1753 // end of PopFrame support
1755 Interpreter::_remove_activation_entry = __ pc();
1757 // preserve exception over this code sequence
1758 __ pop_ptr(rax);
1759 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), rax);
1760 // remove the activation (without doing throws on illegalMonitorExceptions)
1761 __ remove_activation(vtos, rdx, false, true, false);
1762 // restore exception
1763 __ movptr(rax, Address(r15_thread, JavaThread::vm_result_offset()));
1764 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int32_t)NULL_WORD);
1765 __ verify_oop(rax);
1767 // In between activations - previous activation type unknown yet
1768 // compute continuation point - the continuation point expects the
1769 // following registers set up:
1770 //
1771 // rax: exception
1772 // rdx: return address/pc that threw exception
1773 // rsp: expression stack of caller
1774 // rbp: ebp of caller
1775 __ push(rax); // save exception
1776 __ push(rdx); // save return address
1777 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1778 SharedRuntime::exception_handler_for_return_address),
1779 r15_thread, rdx);
1780 __ mov(rbx, rax); // save exception handler
1781 __ pop(rdx); // restore return address
1782 __ pop(rax); // restore exception
1783 // Note that an "issuing PC" is actually the next PC after the call
1784 __ jmp(rbx); // jump to exception
1785 // handler of caller
1786 }
1789 //
1790 // JVMTI ForceEarlyReturn support
1791 //
1792 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1793 address entry = __ pc();
1795 __ restore_bcp();
1796 __ restore_locals();
1797 __ empty_expression_stack();
1798 __ load_earlyret_value(state);
1800 __ movptr(rdx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
1801 Address cond_addr(rdx, JvmtiThreadState::earlyret_state_offset());
1803 // Clear the earlyret state
1804 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive);
1806 __ remove_activation(state, rsi,
1807 false, /* throw_monitor_exception */
1808 false, /* install_monitor_exception */
1809 true); /* notify_jvmdi */
1810 __ jmp(rsi);
1812 return entry;
1813 } // end of ForceEarlyReturn support
1816 //-----------------------------------------------------------------------------
1817 // Helper for vtos entry point generation
1819 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t,
1820 address& bep,
1821 address& cep,
1822 address& sep,
1823 address& aep,
1824 address& iep,
1825 address& lep,
1826 address& fep,
1827 address& dep,
1828 address& vep) {
1829 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1830 Label L;
1831 aep = __ pc(); __ push_ptr(); __ jmp(L);
1832 fep = __ pc(); __ push_f(); __ jmp(L);
1833 dep = __ pc(); __ push_d(); __ jmp(L);
1834 lep = __ pc(); __ push_l(); __ jmp(L);
1835 bep = cep = sep =
1836 iep = __ pc(); __ push_i();
1837 vep = __ pc();
1838 __ bind(L);
1839 generate_and_dispatch(t);
1840 }
1843 //-----------------------------------------------------------------------------
1844 // Generation of individual instructions
1846 // helpers for generate_and_dispatch
1849 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1850 : TemplateInterpreterGenerator(code) {
1851 generate_all(); // down here so it can be "virtual"
1852 }
1854 //-----------------------------------------------------------------------------
1856 // Non-product code
1857 #ifndef PRODUCT
1858 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1859 address entry = __ pc();
1861 __ push(state);
1862 __ push(c_rarg0);
1863 __ push(c_rarg1);
1864 __ push(c_rarg2);
1865 __ push(c_rarg3);
1866 __ mov(c_rarg2, rax); // Pass itos
1867 #ifdef _WIN64
1868 __ movflt(xmm3, xmm0); // Pass ftos
1869 #endif
1870 __ call_VM(noreg,
1871 CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode),
1872 c_rarg1, c_rarg2, c_rarg3);
1873 __ pop(c_rarg3);
1874 __ pop(c_rarg2);
1875 __ pop(c_rarg1);
1876 __ pop(c_rarg0);
1877 __ pop(state);
1878 __ ret(0); // return from result handler
1880 return entry;
1881 }
1883 void TemplateInterpreterGenerator::count_bytecode() {
1884 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value));
1885 }
1887 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1888 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()]));
1889 }
1891 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1892 __ mov32(rbx, ExternalAddress((address) &BytecodePairHistogram::_index));
1893 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes);
1894 __ orl(rbx,
1895 ((int) t->bytecode()) <<
1896 BytecodePairHistogram::log2_number_of_codes);
1897 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx);
1898 __ lea(rscratch1, ExternalAddress((address) BytecodePairHistogram::_counters));
1899 __ incrementl(Address(rscratch1, rbx, Address::times_4));
1900 }
1903 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1904 // Call a little run-time stub to avoid blow-up for each bytecode.
1905 // The run-time runtime saves the right registers, depending on
1906 // the tosca in-state for the given template.
1908 assert(Interpreter::trace_code(t->tos_in()) != NULL,
1909 "entry must have been generated");
1910 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1911 __ andptr(rsp, -16); // align stack as required by ABI
1912 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in())));
1913 __ mov(rsp, r12); // restore sp
1914 __ reinit_heapbase();
1915 }
1918 void TemplateInterpreterGenerator::stop_interpreter_at() {
1919 Label L;
1920 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value),
1921 StopInterpreterAt);
1922 __ jcc(Assembler::notEqual, L);
1923 __ int3();
1924 __ bind(L);
1925 }
1926 #endif // !PRODUCT
1927 #endif // ! CC_INTERP