Mercurial > jdk8-mips64-public > hotspot / file revision

 /*

  * Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.

  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

  *

  * This code is free software; you can redistribute it and/or modify it

  * under the terms of the GNU General Public License version 2 only, as

  * published by the Free Software Foundation.

  *

  * This code is distributed in the hope that it will be useful, but WITHOUT

  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

  * version 2 for more details (a copy is included in the LICENSE file that

  * accompanied this code).

  *

  * You should have received a copy of the GNU General Public License version

  * 2 along with this work; if not, write to the Free Software Foundation,

  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

  *

  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

  * or visit www.oracle.com if you need additional information or have any

  * questions.

  *

  */

 #include "precompiled.hpp"

 #include "asm/macroAssembler.hpp"

 #include "asm/macroAssembler.inline.hpp"

 #include "code/debugInfoRec.hpp"

 #include "code/icBuffer.hpp"

 #include "code/vtableStubs.hpp"

 #include "interpreter/interpreter.hpp"

 #include "oops/compiledICHolder.hpp"

 #include "prims/jvmtiRedefineClassesTrace.hpp"

 #include "runtime/sharedRuntime.hpp"

 #include "runtime/vframeArray.hpp"

 #include "vmreg_x86.inline.hpp"

 #ifdef COMPILER1

 #include "c1/c1_Runtime1.hpp"

 #endif

 #ifdef COMPILER2

 #include "opto/runtime.hpp"

 #endif

 #define __ masm->

 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;

 class SimpleRuntimeFrame {

   public:

   // Most of the runtime stubs have this simple frame layout.

   // This class exists to make the layout shared in one place.

   // Offsets are for compiler stack slots, which are jints.

   enum layout {

     // The frame sender code expects that rbp will be in the "natural" place and

     // will override any oopMap setting for it. We must therefore force the layout

     // so that it agrees with the frame sender code.

     rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,

     rbp_off2,

     return_off, return_off2,

     framesize

   };

 };

 class RegisterSaver {

   // Capture info about frame layout.  Layout offsets are in jint

   // units because compiler frame slots are jints.

 #define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off

   enum layout {

     fpu_state_off = frame::arg_reg_save_area_bytes/BytesPerInt, // fxsave save area

     xmm_off       = fpu_state_off + 160/BytesPerInt,            // offset in fxsave save area

     DEF_XMM_OFFS(0),

     DEF_XMM_OFFS(1),

     DEF_XMM_OFFS(2),

     DEF_XMM_OFFS(3),

     DEF_XMM_OFFS(4),

     DEF_XMM_OFFS(5),

     DEF_XMM_OFFS(6),

     DEF_XMM_OFFS(7),

     DEF_XMM_OFFS(8),

     DEF_XMM_OFFS(9),

     DEF_XMM_OFFS(10),

     DEF_XMM_OFFS(11),

     DEF_XMM_OFFS(12),

     DEF_XMM_OFFS(13),

     DEF_XMM_OFFS(14),

     DEF_XMM_OFFS(15),

     fpu_state_end = fpu_state_off + ((FPUStateSizeInWords-1)*wordSize / BytesPerInt),

     fpu_stateH_end,

     r15_off, r15H_off,

     r14_off, r14H_off,

     r13_off, r13H_off,

     r12_off, r12H_off,

     r11_off, r11H_off,

     r10_off, r10H_off,

     r9_off,  r9H_off,

     r8_off,  r8H_off,

     rdi_off, rdiH_off,

     rsi_off, rsiH_off,

     ignore_off, ignoreH_off,  // extra copy of rbp

     rsp_off, rspH_off,

     rbx_off, rbxH_off,

     rdx_off, rdxH_off,

     rcx_off, rcxH_off,

     rax_off, raxH_off,

     // 16-byte stack alignment fill word: see MacroAssembler::push/pop_IU_state

     align_off, alignH_off,

     flags_off, flagsH_off,

     // The frame sender code expects that rbp will be in the "natural" place and

     // will override any oopMap setting for it. We must therefore force the layout

     // so that it agrees with the frame sender code.

     rbp_off, rbpH_off,        // copy of rbp we will restore

     return_off, returnH_off,  // slot for return address

     reg_save_size             // size in compiler stack slots

   };

  public:

   static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors = false);

   static void restore_live_registers(MacroAssembler* masm, bool restore_vectors = false);

   // Offsets into the register save area

   // Used by deoptimization when it is managing result register

   // values on its own

   static int rax_offset_in_bytes(void)    { return BytesPerInt * rax_off; }

   static int rdx_offset_in_bytes(void)    { return BytesPerInt * rdx_off; }

   static int rbx_offset_in_bytes(void)    { return BytesPerInt * rbx_off; }

   static int xmm0_offset_in_bytes(void)   { return BytesPerInt * xmm0_off; }

   static int return_offset_in_bytes(void) { return BytesPerInt * return_off; }

   // During deoptimization only the result registers need to be restored,

   // all the other values have already been extracted.

   static void restore_result_registers(MacroAssembler* masm);

 };

 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors) {

   int vect_words = 0;

 #ifdef COMPILER2

   if (save_vectors) {

     assert(UseAVX > 0, "256bit vectors are supported only with AVX");

     assert(MaxVectorSize == 32, "only 256bit vectors are supported now");

     // Save upper half of YMM registes

     vect_words = 16 * 16 / wordSize;

     additional_frame_words += vect_words;

   }

 #else

   assert(!save_vectors, "vectors are generated only by C2");

 #endif

   // Always make the frame size 16-byte aligned

   int frame_size_in_bytes = round_to(additional_frame_words*wordSize +

                                      reg_save_size*BytesPerInt, 16);

   // OopMap frame size is in compiler stack slots (jint's) not bytes or words

   int frame_size_in_slots = frame_size_in_bytes / BytesPerInt;

   // The caller will allocate additional_frame_words

   int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt;

   // CodeBlob frame size is in words.

   int frame_size_in_words = frame_size_in_bytes / wordSize;

   *total_frame_words = frame_size_in_words;

   // Save registers, fpu state, and flags.

   // We assume caller has already pushed the return address onto the

   // stack, so rsp is 8-byte aligned here.

   // We push rpb twice in this sequence because we want the real rbp

   // to be under the return like a normal enter.

   __ enter();          // rsp becomes 16-byte aligned here

   __ push_CPU_state(); // Push a multiple of 16 bytes

   if (vect_words > 0) {

     assert(vect_words*wordSize == 256, "");

     __ subptr(rsp, 256); // Save upper half of YMM registes

     __ vextractf128h(Address(rsp,  0),xmm0);

     __ vextractf128h(Address(rsp, 16),xmm1);

     __ vextractf128h(Address(rsp, 32),xmm2);

     __ vextractf128h(Address(rsp, 48),xmm3);

     __ vextractf128h(Address(rsp, 64),xmm4);

     __ vextractf128h(Address(rsp, 80),xmm5);

     __ vextractf128h(Address(rsp, 96),xmm6);

     __ vextractf128h(Address(rsp,112),xmm7);

     __ vextractf128h(Address(rsp,128),xmm8);

     __ vextractf128h(Address(rsp,144),xmm9);

     __ vextractf128h(Address(rsp,160),xmm10);

     __ vextractf128h(Address(rsp,176),xmm11);

     __ vextractf128h(Address(rsp,192),xmm12);

     __ vextractf128h(Address(rsp,208),xmm13);

     __ vextractf128h(Address(rsp,224),xmm14);

     __ vextractf128h(Address(rsp,240),xmm15);

   }

   if (frame::arg_reg_save_area_bytes != 0) {

     // Allocate argument register save area

     __ subptr(rsp, frame::arg_reg_save_area_bytes);

   }

   // Set an oopmap for the call site.  This oopmap will map all

   // oop-registers and debug-info registers as callee-saved.  This

   // will allow deoptimization at this safepoint to find all possible

   // debug-info recordings, as well as let GC find all oops.

   OopMapSet *oop_maps = new OopMapSet();

   OopMap* map = new OopMap(frame_size_in_slots, 0);

 #define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_slots)

   map->set_callee_saved(STACK_OFFSET( rax_off ), rax->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( rcx_off ), rcx->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( rdx_off ), rdx->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( rbx_off ), rbx->as_VMReg());

   // rbp location is known implicitly by the frame sender code, needs no oopmap

   // and the location where rbp was saved by is ignored

   map->set_callee_saved(STACK_OFFSET( rsi_off ), rsi->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( rdi_off ), rdi->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r8_off  ), r8->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r9_off  ), r9->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r10_off ), r10->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r11_off ), r11->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r12_off ), r12->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r13_off ), r13->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r14_off ), r14->as_VMReg());

   map->set_callee_saved(STACK_OFFSET( r15_off ), r15->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm0_off ), xmm0->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm1_off ), xmm1->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm2_off ), xmm2->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm3_off ), xmm3->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm4_off ), xmm4->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm5_off ), xmm5->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm6_off ), xmm6->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm7_off ), xmm7->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm8_off ), xmm8->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm9_off ), xmm9->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm10_off), xmm10->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm11_off), xmm11->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm12_off), xmm12->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm13_off), xmm13->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm14_off), xmm14->as_VMReg());

   map->set_callee_saved(STACK_OFFSET(xmm15_off), xmm15->as_VMReg());

   // %%% These should all be a waste but we'll keep things as they were for now

   if (true) {

     map->set_callee_saved(STACK_OFFSET( raxH_off ), rax->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( rcxH_off ), rcx->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( rdxH_off ), rdx->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( rbxH_off ), rbx->as_VMReg()->next());

     // rbp location is known implicitly by the frame sender code, needs no oopmap

     map->set_callee_saved(STACK_OFFSET( rsiH_off ), rsi->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( rdiH_off ), rdi->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r8H_off  ), r8->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r9H_off  ), r9->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r10H_off ), r10->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r11H_off ), r11->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r12H_off ), r12->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r13H_off ), r13->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r14H_off ), r14->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET( r15H_off ), r15->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm0H_off ), xmm0->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm1H_off ), xmm1->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm2H_off ), xmm2->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm3H_off ), xmm3->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm4H_off ), xmm4->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm5H_off ), xmm5->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm6H_off ), xmm6->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm7H_off ), xmm7->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm8H_off ), xmm8->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm9H_off ), xmm9->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm10H_off), xmm10->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm11H_off), xmm11->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm12H_off), xmm12->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm13H_off), xmm13->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm14H_off), xmm14->as_VMReg()->next());

     map->set_callee_saved(STACK_OFFSET(xmm15H_off), xmm15->as_VMReg()->next());

   }

   return map;

 }

 void RegisterSaver::restore_live_registers(MacroAssembler* masm, bool restore_vectors) {

   if (frame::arg_reg_save_area_bytes != 0) {

     // Pop arg register save area

     __ addptr(rsp, frame::arg_reg_save_area_bytes);

   }

 #ifdef COMPILER2

   if (restore_vectors) {

     // Restore upper half of YMM registes.

     assert(UseAVX > 0, "256bit vectors are supported only with AVX");

     assert(MaxVectorSize == 32, "only 256bit vectors are supported now");

     __ vinsertf128h(xmm0, Address(rsp,  0));

     __ vinsertf128h(xmm1, Address(rsp, 16));

     __ vinsertf128h(xmm2, Address(rsp, 32));

     __ vinsertf128h(xmm3, Address(rsp, 48));

     __ vinsertf128h(xmm4, Address(rsp, 64));

     __ vinsertf128h(xmm5, Address(rsp, 80));

     __ vinsertf128h(xmm6, Address(rsp, 96));

     __ vinsertf128h(xmm7, Address(rsp,112));

     __ vinsertf128h(xmm8, Address(rsp,128));

     __ vinsertf128h(xmm9, Address(rsp,144));

     __ vinsertf128h(xmm10, Address(rsp,160));

     __ vinsertf128h(xmm11, Address(rsp,176));

     __ vinsertf128h(xmm12, Address(rsp,192));

     __ vinsertf128h(xmm13, Address(rsp,208));

     __ vinsertf128h(xmm14, Address(rsp,224));

     __ vinsertf128h(xmm15, Address(rsp,240));

     __ addptr(rsp, 256);

   }

 #else

   assert(!restore_vectors, "vectors are generated only by C2");

 #endif

   // Recover CPU state

   __ pop_CPU_state();

   // Get the rbp described implicitly by the calling convention (no oopMap)

   __ pop(rbp);

 }

 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {

   // Just restore result register. Only used by deoptimization. By

   // now any callee save register that needs to be restored to a c2

   // caller of the deoptee has been extracted into the vframeArray

   // and will be stuffed into the c2i adapter we create for later

   // restoration so only result registers need to be restored here.

   // Restore fp result register

   __ movdbl(xmm0, Address(rsp, xmm0_offset_in_bytes()));

   // Restore integer result register

   __ movptr(rax, Address(rsp, rax_offset_in_bytes()));

   __ movptr(rdx, Address(rsp, rdx_offset_in_bytes()));

   // Pop all of the register save are off the stack except the return address

   __ addptr(rsp, return_offset_in_bytes());

 }

 // Is vector's size (in bytes) bigger than a size saved by default?

 // 16 bytes XMM registers are saved by default using fxsave/fxrstor instructions.

 bool SharedRuntime::is_wide_vector(int size) {

   return size > 16;

 }

 // The java_calling_convention describes stack locations as ideal slots on

 // a frame with no abi restrictions. Since we must observe abi restrictions

 // (like the placement of the register window) the slots must be biased by

 // the following value.

 static int reg2offset_in(VMReg r) {

   // Account for saved rbp and return address

   // This should really be in_preserve_stack_slots

   return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size;

 }

 static int reg2offset_out(VMReg r) {

   return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;

 }

 // ---------------------------------------------------------------------------

 // Read the array of BasicTypes from a signature, and compute where the

 // arguments should go.  Values in the VMRegPair regs array refer to 4-byte

 // quantities.  Values less than VMRegImpl::stack0 are registers, those above

 // refer to 4-byte stack slots.  All stack slots are based off of the stack pointer

 // as framesizes are fixed.

 // VMRegImpl::stack0 refers to the first slot 0(sp).

 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher.  Register

 // up to RegisterImpl::number_of_registers) are the 64-bit

 // integer registers.

 // Note: the INPUTS in sig_bt are in units of Java argument words, which are

 // either 32-bit or 64-bit depending on the build.  The OUTPUTS are in 32-bit

 // units regardless of build. Of course for i486 there is no 64 bit build

 // The Java calling convention is a "shifted" version of the C ABI.

 // By skipping the first C ABI register we can call non-static jni methods

 // with small numbers of arguments without having to shuffle the arguments

 // at all. Since we control the java ABI we ought to at least get some

 // advantage out of it.

 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,

                                            VMRegPair *regs,

                                            int total_args_passed,

                                            int is_outgoing) {

   // Create the mapping between argument positions and

   // registers.

   static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = {

     j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5

   };

   static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_j] = {

     j_farg0, j_farg1, j_farg2, j_farg3,

     j_farg4, j_farg5, j_farg6, j_farg7

   };

   uint int_args = 0;

   uint fp_args = 0;

   uint stk_args = 0; // inc by 2 each time

   for (int i = 0; i < total_args_passed; i++) {

     switch (sig_bt[i]) {

     case T_BOOLEAN:

     case T_CHAR:

     case T_BYTE:

     case T_SHORT:

     case T_INT:

       if (int_args < Argument::n_int_register_parameters_j) {

         regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());

       } else {

         regs[i].set1(VMRegImpl::stack2reg(stk_args));

         stk_args += 2;

       }

       break;

     case T_VOID:

       // halves of T_LONG or T_DOUBLE

       assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");

       regs[i].set_bad();

       break;

     case T_LONG:

       assert(sig_bt[i + 1] == T_VOID, "expecting half");

       // fall through

     case T_OBJECT:

     case T_ARRAY:

     case T_ADDRESS:

       if (int_args < Argument::n_int_register_parameters_j) {

         regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());

       } else {

         regs[i].set2(VMRegImpl::stack2reg(stk_args));

         stk_args += 2;

       }

       break;

     case T_FLOAT:

       if (fp_args < Argument::n_float_register_parameters_j) {

         regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());

       } else {

         regs[i].set1(VMRegImpl::stack2reg(stk_args));

         stk_args += 2;

       }

       break;

     case T_DOUBLE:

       assert(sig_bt[i + 1] == T_VOID, "expecting half");

       if (fp_args < Argument::n_float_register_parameters_j) {

         regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());

       } else {

         regs[i].set2(VMRegImpl::stack2reg(stk_args));

         stk_args += 2;

       }

       break;

     default:

       ShouldNotReachHere();

       break;

     }

   }

   return round_to(stk_args, 2);

 }

 // Patch the callers callsite with entry to compiled code if it exists.

 static void patch_callers_callsite(MacroAssembler *masm) {

   Label L;

   __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);

   __ jcc(Assembler::equal, L);

   // Save the current stack pointer

   __ mov(r13, rsp);

   // Schedule the branch target address early.

   // Call into the VM to patch the caller, then jump to compiled callee

   // rax isn't live so capture return address while we easily can

   __ movptr(rax, Address(rsp, 0));

   // align stack so push_CPU_state doesn't fault

   __ andptr(rsp, -(StackAlignmentInBytes));

   __ push_CPU_state();

   // VM needs caller's callsite

   // VM needs target method

   // This needs to be a long call since we will relocate this adapter to

   // the codeBuffer and it may not reach

   // Allocate argument register save area

   if (frame::arg_reg_save_area_bytes != 0) {

     __ subptr(rsp, frame::arg_reg_save_area_bytes);

   }

   __ mov(c_rarg0, rbx);

   __ mov(c_rarg1, rax);

   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));

   // De-allocate argument register save area

   if (frame::arg_reg_save_area_bytes != 0) {

     __ addptr(rsp, frame::arg_reg_save_area_bytes);

   }

   __ pop_CPU_state();

   // restore sp

   __ mov(rsp, r13);

   __ bind(L);

 }

 static void gen_c2i_adapter(MacroAssembler *masm,

                             int total_args_passed,

                             int comp_args_on_stack,

                             const BasicType *sig_bt,

                             const VMRegPair *regs,

                             Label& skip_fixup) {

   // Before we get into the guts of the C2I adapter, see if we should be here

   // at all.  We've come from compiled code and are attempting to jump to the

   // interpreter, which means the caller made a static call to get here

   // (vcalls always get a compiled target if there is one).  Check for a

   // compiled target.  If there is one, we need to patch the caller's call.

   patch_callers_callsite(masm);

   __ bind(skip_fixup);

   // Since all args are passed on the stack, total_args_passed *

   // Interpreter::stackElementSize is the space we need. Plus 1 because

   // we also account for the return address location since

   // we store it first rather than hold it in rax across all the shuffling

   int extraspace = (total_args_passed * Interpreter::stackElementSize) + wordSize;

   // stack is aligned, keep it that way

   extraspace = round_to(extraspace, 2*wordSize);

   // Get return address

   __ pop(rax);

   // set senderSP value

   __ mov(r13, rsp);

   __ subptr(rsp, extraspace);

   // Store the return address in the expected location

   __ movptr(Address(rsp, 0), rax);

   // Now write the args into the outgoing interpreter space

   for (int i = 0; i < total_args_passed; i++) {

     if (sig_bt[i] == T_VOID) {

       assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");

       continue;

     }

     // offset to start parameters

     int st_off   = (total_args_passed - i) * Interpreter::stackElementSize;

     int next_off = st_off - Interpreter::stackElementSize;

     // Say 4 args:

     // i   st_off

     // 0   32 T_LONG

     // 1   24 T_VOID

     // 2   16 T_OBJECT

     // 3    8 T_BOOL

     // -    0 return address

     //

     // However to make thing extra confusing. Because we can fit a long/double in

     // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter

     // leaves one slot empty and only stores to a single slot. In this case the

     // slot that is occupied is the T_VOID slot. See I said it was confusing.

     VMReg r_1 = regs[i].first();

     VMReg r_2 = regs[i].second();

     if (!r_1->is_valid()) {

       assert(!r_2->is_valid(), "");

       continue;

     }

     if (r_1->is_stack()) {

       // memory to memory use rax

       int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;

       if (!r_2->is_valid()) {

         // sign extend??

         __ movl(rax, Address(rsp, ld_off));

         __ movptr(Address(rsp, st_off), rax);

       } else {

         __ movq(rax, Address(rsp, ld_off));

         // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG

         // T_DOUBLE and T_LONG use two slots in the interpreter

         if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {

           // ld_off == LSW, ld_off+wordSize == MSW

           // st_off == MSW, next_off == LSW

           __ movq(Address(rsp, next_off), rax);

 #ifdef ASSERT

           // Overwrite the unused slot with known junk

           __ mov64(rax, CONST64(0xdeadffffdeadaaaa));

           __ movptr(Address(rsp, st_off), rax);

 #endif /* ASSERT */

         } else {

           __ movq(Address(rsp, st_off), rax);

         }

       }

     } else if (r_1->is_Register()) {

       Register r = r_1->as_Register();

       if (!r_2->is_valid()) {

         // must be only an int (or less ) so move only 32bits to slot

         // why not sign extend??

         __ movl(Address(rsp, st_off), r);

       } else {

         // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG

         // T_DOUBLE and T_LONG use two slots in the interpreter

         if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {

           // long/double in gpr

 #ifdef ASSERT

           // Overwrite the unused slot with known junk

           __ mov64(rax, CONST64(0xdeadffffdeadaaab));

           __ movptr(Address(rsp, st_off), rax);

 #endif /* ASSERT */

           __ movq(Address(rsp, next_off), r);

         } else {

           __ movptr(Address(rsp, st_off), r);

         }

       }

     } else {

       assert(r_1->is_XMMRegister(), "");

       if (!r_2->is_valid()) {

         // only a float use just part of the slot

         __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());

       } else {

 #ifdef ASSERT

         // Overwrite the unused slot with known junk

         __ mov64(rax, CONST64(0xdeadffffdeadaaac));

         __ movptr(Address(rsp, st_off), rax);

 #endif /* ASSERT */

         __ movdbl(Address(rsp, next_off), r_1->as_XMMRegister());

       }

     }

   }

   // Schedule the branch target address early.

   __ movptr(rcx, Address(rbx, in_bytes(Method::interpreter_entry_offset())));

   __ jmp(rcx);

 }

 static void range_check(MacroAssembler* masm, Register pc_reg, Register temp_reg,

                         address code_start, address code_end,

                         Label& L_ok) {

   Label L_fail;

   __ lea(temp_reg, ExternalAddress(code_start));

   __ cmpptr(pc_reg, temp_reg);

   __ jcc(Assembler::belowEqual, L_fail);

   __ lea(temp_reg, ExternalAddress(code_end));

   __ cmpptr(pc_reg, temp_reg);

   __ jcc(Assembler::below, L_ok);

   __ bind(L_fail);

 }

 static void gen_i2c_adapter(MacroAssembler *masm,

                             int total_args_passed,

                             int comp_args_on_stack,

                             const BasicType *sig_bt,

                             const VMRegPair *regs) {

   // Note: r13 contains the senderSP on entry. We must preserve it since

   // we may do a i2c -> c2i transition if we lose a race where compiled

   // code goes non-entrant while we get args ready.

   // In addition we use r13 to locate all the interpreter args as

   // we must align the stack to 16 bytes on an i2c entry else we

   // lose alignment we expect in all compiled code and register

   // save code can segv when fxsave instructions find improperly

   // aligned stack pointer.

   // Adapters can be frameless because they do not require the caller

   // to perform additional cleanup work, such as correcting the stack pointer.

   // An i2c adapter is frameless because the *caller* frame, which is interpreted,

   // routinely repairs its own stack pointer (from interpreter_frame_last_sp),

   // even if a callee has modified the stack pointer.

   // A c2i adapter is frameless because the *callee* frame, which is interpreted,

   // routinely repairs its caller's stack pointer (from sender_sp, which is set

   // up via the senderSP register).

   // In other words, if *either* the caller or callee is interpreted, we can

   // get the stack pointer repaired after a call.

   // This is why c2i and i2c adapters cannot be indefinitely composed.

   // In particular, if a c2i adapter were to somehow call an i2c adapter,

   // both caller and callee would be compiled methods, and neither would

   // clean up the stack pointer changes performed by the two adapters.

   // If this happens, control eventually transfers back to the compiled

   // caller, but with an uncorrected stack, causing delayed havoc.

   // Pick up the return address

   __ movptr(rax, Address(rsp, 0));

   if (VerifyAdapterCalls &&

       (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) {

     // So, let's test for cascading c2i/i2c adapters right now.

     //  assert(Interpreter::contains($return_addr) ||

     //         StubRoutines::contains($return_addr),

     //         "i2c adapter must return to an interpreter frame");

     __ block_comment("verify_i2c { ");

     Label L_ok;

     if (Interpreter::code() != NULL)

       range_check(masm, rax, r11,

                   Interpreter::code()->code_start(), Interpreter::code()->code_end(),

                   L_ok);

     if (StubRoutines::code1() != NULL)

       range_check(masm, rax, r11,

                   StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(),

                   L_ok);

     if (StubRoutines::code2() != NULL)

       range_check(masm, rax, r11,

                   StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(),

                   L_ok);

     const char* msg = "i2c adapter must return to an interpreter frame";

     __ block_comment(msg);

     __ stop(msg);

     __ bind(L_ok);

     __ block_comment("} verify_i2ce ");

   }

   // Must preserve original SP for loading incoming arguments because

   // we need to align the outgoing SP for compiled code.

   __ movptr(r11, rsp);

   // Cut-out for having no stack args.  Since up to 2 int/oop args are passed

   // in registers, we will occasionally have no stack args.

   int comp_words_on_stack = 0;

   if (comp_args_on_stack) {

     // Sig words on the stack are greater-than VMRegImpl::stack0.  Those in

     // registers are below.  By subtracting stack0, we either get a negative

     // number (all values in registers) or the maximum stack slot accessed.

     // Convert 4-byte c2 stack slots to words.

     comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord;

     // Round up to miminum stack alignment, in wordSize

     comp_words_on_stack = round_to(comp_words_on_stack, 2);

     __ subptr(rsp, comp_words_on_stack * wordSize);

   }

   // Ensure compiled code always sees stack at proper alignment

   __ andptr(rsp, -16);

   // push the return address and misalign the stack that youngest frame always sees

   // as far as the placement of the call instruction

   __ push(rax);

   // Put saved SP in another register

   const Register saved_sp = rax;

   __ movptr(saved_sp, r11);

   // Will jump to the compiled code just as if compiled code was doing it.

   // Pre-load the register-jump target early, to schedule it better.

   __ movptr(r11, Address(rbx, in_bytes(Method::from_compiled_offset())));

   // Now generate the shuffle code.  Pick up all register args and move the

   // rest through the floating point stack top.

   for (int i = 0; i < total_args_passed; i++) {

     if (sig_bt[i] == T_VOID) {

       // Longs and doubles are passed in native word order, but misaligned

       // in the 32-bit build.

       assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");

       continue;

     }

     // Pick up 0, 1 or 2 words from SP+offset.

     assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),

             "scrambled load targets?");

     // Load in argument order going down.

     int ld_off = (total_args_passed - i)*Interpreter::stackElementSize;

     // Point to interpreter value (vs. tag)

     int next_off = ld_off - Interpreter::stackElementSize;

     //

     //

     //

     VMReg r_1 = regs[i].first();

     VMReg r_2 = regs[i].second();

     if (!r_1->is_valid()) {

       assert(!r_2->is_valid(), "");

       continue;

     }

     if (r_1->is_stack()) {

       // Convert stack slot to an SP offset (+ wordSize to account for return address )

       int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;

       // We can use r13 as a temp here because compiled code doesn't need r13 as an input

       // and if we end up going thru a c2i because of a miss a reasonable value of r13

       // will be generated.

       if (!r_2->is_valid()) {

         // sign extend???

         __ movl(r13, Address(saved_sp, ld_off));

         __ movptr(Address(rsp, st_off), r13);

       } else {

         //

         // We are using two optoregs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE

         // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case

         // So we must adjust where to pick up the data to match the interpreter.

         //

         // Interpreter local[n] == MSW, local[n+1] == LSW however locals

         // are accessed as negative so LSW is at LOW address

         // ld_off is MSW so get LSW

         const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?

                            next_off : ld_off;

         __ movq(r13, Address(saved_sp, offset));

         // st_off is LSW (i.e. reg.first())

         __ movq(Address(rsp, st_off), r13);

       }

     } else if (r_1->is_Register()) {  // Register argument

       Register r = r_1->as_Register();

       assert(r != rax, "must be different");

       if (r_2->is_valid()) {

         //

         // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE

         // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case

         // So we must adjust where to pick up the data to match the interpreter.

         const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?

                            next_off : ld_off;

         // this can be a misaligned move

         __ movq(r, Address(saved_sp, offset));

       } else {

         // sign extend and use a full word?

         __ movl(r, Address(saved_sp, ld_off));

       }

     } else {

       if (!r_2->is_valid()) {

         __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));

       } else {

         __ movdbl(r_1->as_XMMRegister(), Address(saved_sp, next_off));

       }

     }

   }

   // 6243940 We might end up in handle_wrong_method if

   // the callee is deoptimized as we race thru here. If that

   // happens we don't want to take a safepoint because the

   // caller frame will look interpreted and arguments are now

   // "compiled" so it is much better to make this transition

   // invisible to the stack walking code. Unfortunately if

   // we try and find the callee by normal means a safepoint

   // is possible. So we stash the desired callee in the thread

   // and the vm will find there should this case occur.

   __ movptr(Address(r15_thread, JavaThread::callee_target_offset()), rbx);

   // put Method* where a c2i would expect should we end up there

   // only needed becaus eof c2 resolve stubs return Method* as a result in

   // rax

   __ mov(rax, rbx);

   __ jmp(r11);

 }

 // ---------------------------------------------------------------

 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,

                                                             int total_args_passed,

                                                             int comp_args_on_stack,

                                                             const BasicType *sig_bt,

                                                             const VMRegPair *regs,

                                                             AdapterFingerPrint* fingerprint) {

   address i2c_entry = __ pc();

   gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);

   // -------------------------------------------------------------------------

   // Generate a C2I adapter.  On entry we know rbx holds the Method* during calls

   // to the interpreter.  The args start out packed in the compiled layout.  They

   // need to be unpacked into the interpreter layout.  This will almost always

   // require some stack space.  We grow the current (compiled) stack, then repack

   // the args.  We  finally end in a jump to the generic interpreter entry point.

   // On exit from the interpreter, the interpreter will restore our SP (lest the

   // compiled code, which relys solely on SP and not RBP, get sick).

   address c2i_unverified_entry = __ pc();

   Label skip_fixup;

   Label ok;

   Register holder = rax;

   Register receiver = j_rarg0;

   Register temp = rbx;

   {

     __ load_klass(temp, receiver);

     __ cmpptr(temp, Address(holder, CompiledICHolder::holder_klass_offset()));

     __ movptr(rbx, Address(holder, CompiledICHolder::holder_method_offset()));

     __ jcc(Assembler::equal, ok);

     __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));

     __ bind(ok);

     // Method might have been compiled since the call site was patched to

     // interpreted if that is the case treat it as a miss so we can get

     // the call site corrected.

     __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);

     __ jcc(Assembler::equal, skip_fixup);

     __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));

   }

   address c2i_entry = __ pc();

   gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);

   __ flush();

   return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);

 }

 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,

                                          VMRegPair *regs,

                                          VMRegPair *regs2,

                                          int total_args_passed) {

   assert(regs2 == NULL, "not needed on x86");

 // We return the amount of VMRegImpl stack slots we need to reserve for all

 // the arguments NOT counting out_preserve_stack_slots.

 // NOTE: These arrays will have to change when c1 is ported

 #ifdef _WIN64

     static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {

       c_rarg0, c_rarg1, c_rarg2, c_rarg3

     };

     static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {

       c_farg0, c_farg1, c_farg2, c_farg3

     };

 #else

     static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {

       c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, c_rarg5

     };

     static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {

       c_farg0, c_farg1, c_farg2, c_farg3,

       c_farg4, c_farg5, c_farg6, c_farg7

     };

 #endif // _WIN64

     uint int_args = 0;

     uint fp_args = 0;

     uint stk_args = 0; // inc by 2 each time

     for (int i = 0; i < total_args_passed; i++) {

       switch (sig_bt[i]) {

       case T_BOOLEAN:

       case T_CHAR:

       case T_BYTE:

       case T_SHORT:

       case T_INT:

         if (int_args < Argument::n_int_register_parameters_c) {

           regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());

 #ifdef _WIN64

           fp_args++;

           // Allocate slots for callee to stuff register args the stack.

           stk_args += 2;

 #endif

         } else {

           regs[i].set1(VMRegImpl::stack2reg(stk_args));

           stk_args += 2;

         }

         break;

       case T_LONG:

         assert(sig_bt[i + 1] == T_VOID, "expecting half");

         // fall through

       case T_OBJECT:

       case T_ARRAY:

       case T_ADDRESS:

       case T_METADATA:

         if (int_args < Argument::n_int_register_parameters_c) {

           regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());

 #ifdef _WIN64

           fp_args++;

           stk_args += 2;

 #endif

         } else {

           regs[i].set2(VMRegImpl::stack2reg(stk_args));

           stk_args += 2;

         }

         break;

       case T_FLOAT:

         if (fp_args < Argument::n_float_register_parameters_c) {

           regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());

 #ifdef _WIN64

           int_args++;

           // Allocate slots for callee to stuff register args the stack.

           stk_args += 2;

 #endif

         } else {

           regs[i].set1(VMRegImpl::stack2reg(stk_args));

           stk_args += 2;

         }

         break;

       case T_DOUBLE:

         assert(sig_bt[i + 1] == T_VOID, "expecting half");

         if (fp_args < Argument::n_float_register_parameters_c) {

           regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());

 #ifdef _WIN64

           int_args++;

           // Allocate slots for callee to stuff register args the stack.

           stk_args += 2;

 #endif

         } else {

           regs[i].set2(VMRegImpl::stack2reg(stk_args));

           stk_args += 2;

         }

         break;

       case T_VOID: // Halves of longs and doubles

         assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");

         regs[i].set_bad();

         break;

       default:

         ShouldNotReachHere();

         break;

       }

     }

 #ifdef _WIN64

   // windows abi requires that we always allocate enough stack space

   // for 4 64bit registers to be stored down.

   if (stk_args < 8) {

     stk_args = 8;

   }

 #endif // _WIN64

   return stk_args;

 }

 // On 64 bit we will store integer like items to the stack as

 // 64 bits items (sparc abi) even though java would only store

 // 32bits for a parameter. On 32bit it will simply be 32 bits

 // So this routine will do 32->32 on 32bit and 32->64 on 64bit

 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

   if (src.first()->is_stack()) {

     if (dst.first()->is_stack()) {

       // stack to stack

       __ movslq(rax, Address(rbp, reg2offset_in(src.first())));

       __ movq(Address(rsp, reg2offset_out(dst.first())), rax);

     } else {

       // stack to reg

       __ movslq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));

     }

   } else if (dst.first()->is_stack()) {

     // reg to stack

     // Do we really have to sign extend???

     // __ movslq(src.first()->as_Register(), src.first()->as_Register());

     __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());

   } else {

     // Do we really have to sign extend???

     // __ movslq(dst.first()->as_Register(), src.first()->as_Register());

     if (dst.first() != src.first()) {

       __ movq(dst.first()->as_Register(), src.first()->as_Register());

     }

   }

 }

 static void move_ptr(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

   if (src.first()->is_stack()) {

     if (dst.first()->is_stack()) {

       // stack to stack

       __ movq(rax, Address(rbp, reg2offset_in(src.first())));

       __ movq(Address(rsp, reg2offset_out(dst.first())), rax);

     } else {

       // stack to reg

       __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));

     }

   } else if (dst.first()->is_stack()) {

     // reg to stack

     __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());

   } else {

     if (dst.first() != src.first()) {

       __ movq(dst.first()->as_Register(), src.first()->as_Register());

     }

   }

 }

 // An oop arg. Must pass a handle not the oop itself

 static void object_move(MacroAssembler* masm,

                         OopMap* map,

                         int oop_handle_offset,

                         int framesize_in_slots,

                         VMRegPair src,

                         VMRegPair dst,

                         bool is_receiver,

                         int* receiver_offset) {

   // must pass a handle. First figure out the location we use as a handle

   Register rHandle = dst.first()->is_stack() ? rax : dst.first()->as_Register();

   // See if oop is NULL if it is we need no handle

   if (src.first()->is_stack()) {

     // Oop is already on the stack as an argument

     int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();

     map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));

     if (is_receiver) {

       *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;

     }

     __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);

     __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));

     // conditionally move a NULL

     __ cmovptr(Assembler::equal, rHandle, Address(rbp, reg2offset_in(src.first())));

   } else {

     // Oop is in an a register we must store it to the space we reserve

     // on the stack for oop_handles and pass a handle if oop is non-NULL

     const Register rOop = src.first()->as_Register();

     int oop_slot;

     if (rOop == j_rarg0)

       oop_slot = 0;

     else if (rOop == j_rarg1)

       oop_slot = 1;

     else if (rOop == j_rarg2)

       oop_slot = 2;

     else if (rOop == j_rarg3)

       oop_slot = 3;

     else if (rOop == j_rarg4)

       oop_slot = 4;

     else {

       assert(rOop == j_rarg5, "wrong register");

       oop_slot = 5;

     }

     oop_slot = oop_slot * VMRegImpl::slots_per_word + oop_handle_offset;

     int offset = oop_slot*VMRegImpl::stack_slot_size;

     map->set_oop(VMRegImpl::stack2reg(oop_slot));

     // Store oop in handle area, may be NULL

     __ movptr(Address(rsp, offset), rOop);

     if (is_receiver) {

       *receiver_offset = offset;

     }

     __ cmpptr(rOop, (int32_t)NULL_WORD);

     __ lea(rHandle, Address(rsp, offset));

     // conditionally move a NULL from the handle area where it was just stored

     __ cmovptr(Assembler::equal, rHandle, Address(rsp, offset));

   }

   // If arg is on the stack then place it otherwise it is already in correct reg.

   if (dst.first()->is_stack()) {

     __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);

   }

 }

 // A float arg may have to do float reg int reg conversion

 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

   assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");

   // The calling conventions assures us that each VMregpair is either

   // all really one physical register or adjacent stack slots.

   // This greatly simplifies the cases here compared to sparc.

   if (src.first()->is_stack()) {

     if (dst.first()->is_stack()) {

       __ movl(rax, Address(rbp, reg2offset_in(src.first())));

       __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);

     } else {

       // stack to reg

       assert(dst.first()->is_XMMRegister(), "only expect xmm registers as parameters");

       __ movflt(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_in(src.first())));

     }

   } else if (dst.first()->is_stack()) {

     // reg to stack

     assert(src.first()->is_XMMRegister(), "only expect xmm registers as parameters");

     __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());

   } else {

     // reg to reg

     // In theory these overlap but the ordering is such that this is likely a nop

     if ( src.first() != dst.first()) {

       __ movdbl(dst.first()->as_XMMRegister(),  src.first()->as_XMMRegister());

     }

   }

 }

 // A long move

 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

   // The calling conventions assures us that each VMregpair is either

   // all really one physical register or adjacent stack slots.

   // This greatly simplifies the cases here compared to sparc.

   if (src.is_single_phys_reg() ) {

     if (dst.is_single_phys_reg()) {

       if (dst.first() != src.first()) {

         __ mov(dst.first()->as_Register(), src.first()->as_Register());

       }

     } else {

       assert(dst.is_single_reg(), "not a stack pair");

       __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());

     }

   } else if (dst.is_single_phys_reg()) {

     assert(src.is_single_reg(),  "not a stack pair");

     __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_out(src.first())));

   } else {

     assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");

     __ movq(rax, Address(rbp, reg2offset_in(src.first())));

     __ movq(Address(rsp, reg2offset_out(dst.first())), rax);

   }

 }

 // A double move

 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {

   // The calling conventions assures us that each VMregpair is either

   // all really one physical register or adjacent stack slots.

   // This greatly simplifies the cases here compared to sparc.

   if (src.is_single_phys_reg() ) {

     if (dst.is_single_phys_reg()) {

       // In theory these overlap but the ordering is such that this is likely a nop

       if ( src.first() != dst.first()) {

         __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());

       }

     } else {

       assert(dst.is_single_reg(), "not a stack pair");

       __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());

     }

   } else if (dst.is_single_phys_reg()) {

     assert(src.is_single_reg(),  "not a stack pair");

     __ movdbl(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_out(src.first())));

   } else {

     assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");

     __ movq(rax, Address(rbp, reg2offset_in(src.first())));

     __ movq(Address(rsp, reg2offset_out(dst.first())), rax);

   }

 }

 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {

   // We always ignore the frame_slots arg and just use the space just below frame pointer

   // which by this time is free to use

   switch (ret_type) {

   case T_FLOAT:

     __ movflt(Address(rbp, -wordSize), xmm0);

     break;

   case T_DOUBLE:

     __ movdbl(Address(rbp, -wordSize), xmm0);

     break;

   case T_VOID:  break;

   default: {

     __ movptr(Address(rbp, -wordSize), rax);

     }

   }

 }

 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {

   // We always ignore the frame_slots arg and just use the space just below frame pointer

   // which by this time is free to use

   switch (ret_type) {

   case T_FLOAT:

     __ movflt(xmm0, Address(rbp, -wordSize));

     break;

   case T_DOUBLE:

     __ movdbl(xmm0, Address(rbp, -wordSize));

     break;

   case T_VOID:  break;

   default: {

     __ movptr(rax, Address(rbp, -wordSize));

     }

   }

 }

 static void save_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {

     for ( int i = first_arg ; i < arg_count ; i++ ) {

       if (args[i].first()->is_Register()) {

         __ push(args[i].first()->as_Register());

       } else if (args[i].first()->is_XMMRegister()) {

         __ subptr(rsp, 2*wordSize);

         __ movdbl(Address(rsp, 0), args[i].first()->as_XMMRegister());

       }

     }

 }

 static void restore_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {

     for ( int i = arg_count - 1 ; i >= first_arg ; i-- ) {

       if (args[i].first()->is_Register()) {

         __ pop(args[i].first()->as_Register());

       } else if (args[i].first()->is_XMMRegister()) {

         __ movdbl(args[i].first()->as_XMMRegister(), Address(rsp, 0));

         __ addptr(rsp, 2*wordSize);

       }

     }

 }

 static void save_or_restore_arguments(MacroAssembler* masm,

                                       const int stack_slots,

                                       const int total_in_args,

                                       const int arg_save_area,

                                       OopMap* map,

                                       VMRegPair* in_regs,

                                       BasicType* in_sig_bt) {

   // if map is non-NULL then the code should store the values,

   // otherwise it should load them.

   int slot = arg_save_area;

   // Save down double word first

   for ( int i = 0; i < total_in_args; i++) {

     if (in_regs[i].first()->is_XMMRegister() && in_sig_bt[i] == T_DOUBLE) {

       int offset = slot * VMRegImpl::stack_slot_size;

       slot += VMRegImpl::slots_per_word;

       assert(slot <= stack_slots, "overflow");

       if (map != NULL) {

         __ movdbl(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());

       } else {

         __ movdbl(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));

       }

     }

     if (in_regs[i].first()->is_Register() &&

         (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_ARRAY)) {

       int offset = slot * VMRegImpl::stack_slot_size;

       if (map != NULL) {

         __ movq(Address(rsp, offset), in_regs[i].first()->as_Register());

         if (in_sig_bt[i] == T_ARRAY) {

           map->set_oop(VMRegImpl::stack2reg(slot));;

         }

       } else {

         __ movq(in_regs[i].first()->as_Register(), Address(rsp, offset));

       }

       slot += VMRegImpl::slots_per_word;

     }

   }

   // Save or restore single word registers

   for ( int i = 0; i < total_in_args; i++) {

     if (in_regs[i].first()->is_Register()) {

       int offset = slot * VMRegImpl::stack_slot_size;

       slot++;

       assert(slot <= stack_slots, "overflow");

       // Value is in an input register pass we must flush it to the stack

       const Register reg = in_regs[i].first()->as_Register();

       switch (in_sig_bt[i]) {

         case T_BOOLEAN:

         case T_CHAR:

         case T_BYTE:

         case T_SHORT:

         case T_INT:

           if (map != NULL) {

             __ movl(Address(rsp, offset), reg);

           } else {

             __ movl(reg, Address(rsp, offset));

           }

           break;

         case T_ARRAY:

         case T_LONG:

           // handled above

           break;

         case T_OBJECT:

         default: ShouldNotReachHere();

       }

     } else if (in_regs[i].first()->is_XMMRegister()) {

       if (in_sig_bt[i] == T_FLOAT) {

         int offset = slot * VMRegImpl::stack_slot_size;

         slot++;

         assert(slot <= stack_slots, "overflow");

         if (map != NULL) {

           __ movflt(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());

         } else {

           __ movflt(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));

         }

       }

     } else if (in_regs[i].first()->is_stack()) {

       if (in_sig_bt[i] == T_ARRAY && map != NULL) {

         int offset_in_older_frame = in_regs[i].first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();

         map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + stack_slots));

       }

     }

   }

 }

 // Check GC_locker::needs_gc and enter the runtime if it's true.  This

 // keeps a new JNI critical region from starting until a GC has been

 // forced.  Save down any oops in registers and describe them in an

 // OopMap.

 static void check_needs_gc_for_critical_native(MacroAssembler* masm,

                                                int stack_slots,

                                                int total_c_args,

                                                int total_in_args,

                                                int arg_save_area,

                                                OopMapSet* oop_maps,

                                                VMRegPair* in_regs,

                                                BasicType* in_sig_bt) {

   __ block_comment("check GC_locker::needs_gc");

   Label cont;

   __ cmp8(ExternalAddress((address)GC_locker::needs_gc_address()), false);

   __ jcc(Assembler::equal, cont);

   // Save down any incoming oops and call into the runtime to halt for a GC

   OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);

   save_or_restore_arguments(masm, stack_slots, total_in_args,

                             arg_save_area, map, in_regs, in_sig_bt);

   address the_pc = __ pc();

   oop_maps->add_gc_map( __ offset(), map);

   __ set_last_Java_frame(rsp, noreg, the_pc);

   __ block_comment("block_for_jni_critical");

   __ movptr(c_rarg0, r15_thread);

   __ mov(r12, rsp); // remember sp

   __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows

   __ andptr(rsp, -16); // align stack as required by ABI

   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::block_for_jni_critical)));

   __ mov(rsp, r12); // restore sp

   __ reinit_heapbase();

   __ reset_last_Java_frame(false, true);

   save_or_restore_arguments(masm, stack_slots, total_in_args,

                             arg_save_area, NULL, in_regs, in_sig_bt);

   __ bind(cont);

 #ifdef ASSERT

   if (StressCriticalJNINatives) {

     // Stress register saving

     OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);

     save_or_restore_arguments(masm, stack_slots, total_in_args,

                               arg_save_area, map, in_regs, in_sig_bt);

     // Destroy argument registers

     for (int i = 0; i < total_in_args - 1; i++) {

       if (in_regs[i].first()->is_Register()) {

         const Register reg = in_regs[i].first()->as_Register();

         __ xorptr(reg, reg);

       } else if (in_regs[i].first()->is_XMMRegister()) {

         __ xorpd(in_regs[i].first()->as_XMMRegister(), in_regs[i].first()->as_XMMRegister());

       } else if (in_regs[i].first()->is_FloatRegister()) {

         ShouldNotReachHere();

       } else if (in_regs[i].first()->is_stack()) {

         // Nothing to do

       } else {

         ShouldNotReachHere();

       }

       if (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_DOUBLE) {

         i++;

       }

     }

     save_or_restore_arguments(masm, stack_slots, total_in_args,

                               arg_save_area, NULL, in_regs, in_sig_bt);

   }

 #endif

 }

 // Unpack an array argument into a pointer to the body and the length

 // if the array is non-null, otherwise pass 0 for both.

 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) {

   Register tmp_reg = rax;

   assert(!body_arg.first()->is_Register() || body_arg.first()->as_Register() != tmp_reg,

          "possible collision");

   assert(!length_arg.first()->is_Register() || length_arg.first()->as_Register() != tmp_reg,

          "possible collision");

   __ block_comment("unpack_array_argument {");

   // Pass the length, ptr pair

   Label is_null, done;

   VMRegPair tmp;

   tmp.set_ptr(tmp_reg->as_VMReg());

   if (reg.first()->is_stack()) {

     // Load the arg up from the stack

     move_ptr(masm, reg, tmp);

     reg = tmp;

   }

   __ testptr(reg.first()->as_Register(), reg.first()->as_Register());

   __ jccb(Assembler::equal, is_null);

   __ lea(tmp_reg, Address(reg.first()->as_Register(), arrayOopDesc::base_offset_in_bytes(in_elem_type)));

   move_ptr(masm, tmp, body_arg);

   // load the length relative to the body.

   __ movl(tmp_reg, Address(tmp_reg, arrayOopDesc::length_offset_in_bytes() -

                            arrayOopDesc::base_offset_in_bytes(in_elem_type)));

   move32_64(masm, tmp, length_arg);

   __ jmpb(done);

   __ bind(is_null);

   // Pass zeros

   __ xorptr(tmp_reg, tmp_reg);

   move_ptr(masm, tmp, body_arg);

   move32_64(masm, tmp, length_arg);

   __ bind(done);

   __ block_comment("} unpack_array_argument");

 }

 // Different signatures may require very different orders for the move

 // to avoid clobbering other arguments.  There's no simple way to

 // order them safely.  Compute a safe order for issuing stores and

 // break any cycles in those stores.  This code is fairly general but

 // it's not necessary on the other platforms so we keep it in the

 // platform dependent code instead of moving it into a shared file.

 // (See bugs 7013347 & 7145024.)

 // Note that this code is specific to LP64.

 class ComputeMoveOrder: public StackObj {

   class MoveOperation: public ResourceObj {

     friend class ComputeMoveOrder;

    private:

     VMRegPair        _src;

     VMRegPair        _dst;

     int              _src_index;

     int              _dst_index;

     bool             _processed;

     MoveOperation*  _next;

     MoveOperation*  _prev;

     static int get_id(VMRegPair r) {

       return r.first()->value();

     }

    public:

     MoveOperation(int src_index, VMRegPair src, int dst_index, VMRegPair dst):

       _src(src)

     , _src_index(src_index)

     , _dst(dst)

     , _dst_index(dst_index)

     , _next(NULL)

     , _prev(NULL)

     , _processed(false) {

     }

     VMRegPair src() const              { return _src; }

     int src_id() const                 { return get_id(src()); }

     int src_index() const              { return _src_index; }

     VMRegPair dst() const              { return _dst; }

     void set_dst(int i, VMRegPair dst) { _dst_index = i, _dst = dst; }

     int dst_index() const              { return _dst_index; }

     int dst_id() const                 { return get_id(dst()); }

     MoveOperation* next() const       { return _next; }

     MoveOperation* prev() const       { return _prev; }

     void set_processed()               { _processed = true; }

     bool is_processed() const          { return _processed; }

     // insert

     void break_cycle(VMRegPair temp_register) {

       // create a new store following the last store

       // to move from the temp_register to the original

       MoveOperation* new_store = new MoveOperation(-1, temp_register, dst_index(), dst());

       // break the cycle of links and insert new_store at the end

       // break the reverse link.

       MoveOperation* p = prev();

       assert(p->next() == this, "must be");

       _prev = NULL;

       p->_next = new_store;

       new_store->_prev = p;

       // change the original store to save it's value in the temp.

       set_dst(-1, temp_register);

     }

     void link(GrowableArray<MoveOperation*>& killer) {

       // link this store in front the store that it depends on

       MoveOperation* n = killer.at_grow(src_id(), NULL);

       if (n != NULL) {

         assert(_next == NULL && n->_prev == NULL, "shouldn't have been set yet");

         _next = n;

         n->_prev = this;

       }

     }

   };

  private:

   GrowableArray<MoveOperation*> edges;

  public:

   ComputeMoveOrder(int total_in_args, VMRegPair* in_regs, int total_c_args, VMRegPair* out_regs,

                     BasicType* in_sig_bt, GrowableArray<int>& arg_order, VMRegPair tmp_vmreg) {

     // Move operations where the dest is the stack can all be

     // scheduled first since they can't interfere with the other moves.

     for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {

       if (in_sig_bt[i] == T_ARRAY) {

         c_arg--;

         if (out_regs[c_arg].first()->is_stack() &&

             out_regs[c_arg + 1].first()->is_stack()) {

           arg_order.push(i);

           arg_order.push(c_arg);

         } else {

           if (out_regs[c_arg].first()->is_stack() ||

               in_regs[i].first() == out_regs[c_arg].first()) {

             add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg + 1]);

           } else {

             add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);

           }

         }

       } else if (in_sig_bt[i] == T_VOID) {

         arg_order.push(i);

         arg_order.push(c_arg);

       } else {

         if (out_regs[c_arg].first()->is_stack() ||

             in_regs[i].first() == out_regs[c_arg].first()) {

           arg_order.push(i);

           arg_order.push(c_arg);

         } else {

           add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);

         }

       }

     }

     // Break any cycles in the register moves and emit the in the

     // proper order.

     GrowableArray<MoveOperation*>* stores = get_store_order(tmp_vmreg);

     for (int i = 0; i < stores->length(); i++) {

       arg_order.push(stores->at(i)->src_index());

       arg_order.push(stores->at(i)->dst_index());

     }

  }

   // Collected all the move operations

   void add_edge(int src_index, VMRegPair src, int dst_index, VMRegPair dst) {

     if (src.first() == dst.first()) return;

     edges.append(new MoveOperation(src_index, src, dst_index, dst));

   }

   // Walk the edges breaking cycles between moves.  The result list

   // can be walked in order to produce the proper set of loads

   GrowableArray<MoveOperation*>* get_store_order(VMRegPair temp_register) {

     // Record which moves kill which values

     GrowableArray<MoveOperation*> killer;

     for (int i = 0; i < edges.length(); i++) {

       MoveOperation* s = edges.at(i);

       assert(killer.at_grow(s->dst_id(), NULL) == NULL, "only one killer");

       killer.at_put_grow(s->dst_id(), s, NULL);

     }

     assert(killer.at_grow(MoveOperation::get_id(temp_register), NULL) == NULL,

            "make sure temp isn't in the registers that are killed");

     // create links between loads and stores

     for (int i = 0; i < edges.length(); i++) {

       edges.at(i)->link(killer);

     }

     // at this point, all the move operations are chained together

     // in a doubly linked list.  Processing it backwards finds

     // the beginning of the chain, forwards finds the end.  If there's

     // a cycle it can be broken at any point,  so pick an edge and walk

     // backward until the list ends or we end where we started.

     GrowableArray<MoveOperation*>* stores = new GrowableArray<MoveOperation*>();

     for (int e = 0; e < edges.length(); e++) {

       MoveOperation* s = edges.at(e);

       if (!s->is_processed()) {

         MoveOperation* start = s;

         // search for the beginning of the chain or cycle

         while (start->prev() != NULL && start->prev() != s) {

           start = start->prev();

         }

         if (start->prev() == s) {

           start->break_cycle(temp_register);

         }

         // walk the chain forward inserting to store list

         while (start != NULL) {

           stores->append(start);

           start->set_processed();

           start = start->next();

         }

       }

     }

     return stores;

   }

 };

 static void verify_oop_args(MacroAssembler* masm,

                             methodHandle method,

                             const BasicType* sig_bt,

                             const VMRegPair* regs) {

   Register temp_reg = rbx;  // not part of any compiled calling seq

   if (VerifyOops) {

     for (int i = 0; i < method->size_of_parameters(); i++) {

       if (sig_bt[i] == T_OBJECT ||

           sig_bt[i] == T_ARRAY) {

         VMReg r = regs[i].first();

         assert(r->is_valid(), "bad oop arg");

         if (r->is_stack()) {

           __ movptr(temp_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));

           __ verify_oop(temp_reg);

         } else {

           __ verify_oop(r->as_Register());

         }

       }

     }

   }

 }

 static void gen_special_dispatch(MacroAssembler* masm,

                                  methodHandle method,

                                  const BasicType* sig_bt,

                                  const VMRegPair* regs) {

   verify_oop_args(masm, method, sig_bt, regs);

   vmIntrinsics::ID iid = method->intrinsic_id();

   // Now write the args into the outgoing interpreter space

   bool     has_receiver   = false;

   Register receiver_reg   = noreg;

   int      member_arg_pos = -1;

   Register member_reg     = noreg;

   int      ref_kind       = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid);

   if (ref_kind != 0) {

     member_arg_pos = method->size_of_parameters() - 1;  // trailing MemberName argument

     member_reg = rbx;  // known to be free at this point

     has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind);

   } else if (iid == vmIntrinsics::_invokeBasic) {

     has_receiver = true;

   } else {

     fatal(err_msg_res("unexpected intrinsic id %d", iid));

   }

   if (member_reg != noreg) {

     // Load the member_arg into register, if necessary.

     SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs);

     VMReg r = regs[member_arg_pos].first();

     if (r->is_stack()) {

       __ movptr(member_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));

     } else {

       // no data motion is needed

       member_reg = r->as_Register();

     }

   }

   if (has_receiver) {

     // Make sure the receiver is loaded into a register.

     assert(method->size_of_parameters() > 0, "oob");

     assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object");

     VMReg r = regs[0].first();

     assert(r->is_valid(), "bad receiver arg");

     if (r->is_stack()) {

       // Porting note:  This assumes that compiled calling conventions always

       // pass the receiver oop in a register.  If this is not true on some

       // platform, pick a temp and load the receiver from stack.

       fatal("receiver always in a register");

       receiver_reg = j_rarg0;  // known to be free at this point

       __ movptr(receiver_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));

     } else {

       // no data motion is needed

       receiver_reg = r->as_Register();

     }

   }

   // Figure out which address we are really jumping to:

   MethodHandles::generate_method_handle_dispatch(masm, iid,

                                                  receiver_reg, member_reg, /*for_compiler_entry:*/ true);

 }

 // ---------------------------------------------------------------------------

 // Generate a native wrapper for a given method.  The method takes arguments

 // in the Java compiled code convention, marshals them to the native

 // convention (handlizes oops, etc), transitions to native, makes the call,

 // returns to java state (possibly blocking), unhandlizes any result and

 // returns.

 //

 // Critical native functions are a shorthand for the use of

 // GetPrimtiveArrayCritical and disallow the use of any other JNI

 // functions.  The wrapper is expected to unpack the arguments before

 // passing them to the callee and perform checks before and after the

 // native call to ensure that they GC_locker

 // lock_critical/unlock_critical semantics are followed.  Some other

 // parts of JNI setup are skipped like the tear down of the JNI handle

 // block and the check for pending exceptions it's impossible for them

 // to be thrown.

 //

 // They are roughly structured like this:

 //    if (GC_locker::needs_gc())

 //      SharedRuntime::block_for_jni_critical();

 //    tranistion to thread_in_native

 //    unpack arrray arguments and call native entry point

 //    check for safepoint in progress

 //    check if any thread suspend flags are set

 //      call into JVM and possible unlock the JNI critical

 //      if a GC was suppressed while in the critical native.

 //    transition back to thread_in_Java

 //    return to caller

 //

 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm,

                                                 methodHandle method,

                                                 int compile_id,

                                                 BasicType* in_sig_bt,

                                                 VMRegPair* in_regs,

                                                 BasicType ret_type) {

   if (method->is_method_handle_intrinsic()) {

     vmIntrinsics::ID iid = method->intrinsic_id();

     intptr_t start = (intptr_t)__ pc();

     int vep_offset = ((intptr_t)__ pc()) - start;

     gen_special_dispatch(masm,

                          method,

                          in_sig_bt,

                          in_regs);

     int frame_complete = ((intptr_t)__ pc()) - start;  // not complete, period

     __ flush();

     int stack_slots = SharedRuntime::out_preserve_stack_slots();  // no out slots at all, actually

     return nmethod::new_native_nmethod(method,

                                        compile_id,

                                        masm->code(),

                                        vep_offset,

                                        frame_complete,

                                        stack_slots / VMRegImpl::slots_per_word,

                                        in_ByteSize(-1),

                                        in_ByteSize(-1),

                                        (OopMapSet*)NULL);

   }

   bool is_critical_native = true;

   address native_func = method->critical_native_function();

   if (native_func == NULL) {

     native_func = method->native_function();

     is_critical_native = false;

   }

   assert(native_func != NULL, "must have function");

   // An OopMap for lock (and class if static)

   OopMapSet *oop_maps = new OopMapSet();

   intptr_t start = (intptr_t)__ pc();

   // We have received a description of where all the java arg are located

   // on entry to the wrapper. We need to convert these args to where

   // the jni function will expect them. To figure out where they go

   // we convert the java signature to a C signature by inserting

   // the hidden arguments as arg[0] and possibly arg[1] (static method)

   const int total_in_args = method->size_of_parameters();

   int total_c_args = total_in_args;

   if (!is_critical_native) {

     total_c_args += 1;

     if (method->is_static()) {

       total_c_args++;

     }

   } else {

     for (int i = 0; i < total_in_args; i++) {

       if (in_sig_bt[i] == T_ARRAY) {

         total_c_args++;

       }

     }

   }

   BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);

   VMRegPair* out_regs   = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);

   BasicType* in_elem_bt = NULL;

   int argc = 0;

   if (!is_critical_native) {

     out_sig_bt[argc++] = T_ADDRESS;

     if (method->is_static()) {

       out_sig_bt[argc++] = T_OBJECT;

     }

     for (int i = 0; i < total_in_args ; i++ ) {

       out_sig_bt[argc++] = in_sig_bt[i];

     }

   } else {

     Thread* THREAD = Thread::current();

     in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args);

     SignatureStream ss(method->signature());

     for (int i = 0; i < total_in_args ; i++ ) {

       if (in_sig_bt[i] == T_ARRAY) {

         // Arrays are passed as int, elem* pair

         out_sig_bt[argc++] = T_INT;

         out_sig_bt[argc++] = T_ADDRESS;

         Symbol* atype = ss.as_symbol(CHECK_NULL);

         const char* at = atype->as_C_string();

         if (strlen(at) == 2) {

           assert(at[0] == '[', "must be");

           switch (at[1]) {

             case 'B': in_elem_bt[i]  = T_BYTE; break;

             case 'C': in_elem_bt[i]  = T_CHAR; break;

             case 'D': in_elem_bt[i]  = T_DOUBLE; break;

             case 'F': in_elem_bt[i]  = T_FLOAT; break;

             case 'I': in_elem_bt[i]  = T_INT; break;

             case 'J': in_elem_bt[i]  = T_LONG; break;

             case 'S': in_elem_bt[i]  = T_SHORT; break;

             case 'Z': in_elem_bt[i]  = T_BOOLEAN; break;

             default: ShouldNotReachHere();

           }

         }

       } else {

         out_sig_bt[argc++] = in_sig_bt[i];

         in_elem_bt[i] = T_VOID;

       }

       if (in_sig_bt[i] != T_VOID) {

         assert(in_sig_bt[i] == ss.type(), "must match");

         ss.next();

       }

     }

   }

   // Now figure out where the args must be stored and how much stack space

   // they require.

   int out_arg_slots;

   out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);

   // Compute framesize for the wrapper.  We need to handlize all oops in

   // incoming registers

   // Calculate the total number of stack slots we will need.

   // First count the abi requirement plus all of the outgoing args

   int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;

   // Now the space for the inbound oop handle area

   int total_save_slots = 6 * VMRegImpl::slots_per_word;  // 6 arguments passed in registers

   if (is_critical_native) {

     // Critical natives may have to call out so they need a save area

     // for register arguments.

     int double_slots = 0;

     int single_slots = 0;

     for ( int i = 0; i < total_in_args; i++) {

       if (in_regs[i].first()->is_Register()) {

         const Register reg = in_regs[i].first()->as_Register();

         switch (in_sig_bt[i]) {

           case T_BOOLEAN:

           case T_BYTE:

           case T_SHORT:

           case T_CHAR:

           case T_INT:  single_slots++; break;

           case T_ARRAY:  // specific to LP64 (7145024)

           case T_LONG: double_slots++; break;

           default:  ShouldNotReachHere();

         }

       } else if (in_regs[i].first()->is_XMMRegister()) {

         switch (in_sig_bt[i]) {

           case T_FLOAT:  single_slots++; break;

           case T_DOUBLE: double_slots++; break;

           default:  ShouldNotReachHere();

         }

       } else if (in_regs[i].first()->is_FloatRegister()) {

         ShouldNotReachHere();

       }

     }

     total_save_slots = double_slots * 2 + single_slots;

     // align the save area

     if (double_slots != 0) {

       stack_slots = round_to(stack_slots, 2);

     }

   }

   int oop_handle_offset = stack_slots;

   stack_slots += total_save_slots;

   // Now any space we need for handlizing a klass if static method

   int klass_slot_offset = 0;

   int klass_offset = -1;

   int lock_slot_offset = 0;

   bool is_static = false;

   if (method->is_static()) {

     klass_slot_offset = stack_slots;

     stack_slots += VMRegImpl::slots_per_word;

     klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;

     is_static = true;

   }

   // Plus a lock if needed

   if (method->is_synchronized()) {

     lock_slot_offset = stack_slots;

     stack_slots += VMRegImpl::slots_per_word;

   }

   // Now a place (+2) to save return values or temp during shuffling

   // + 4 for return address (which we own) and saved rbp

   stack_slots += 6;

   // Ok The space we have allocated will look like:

   //

   //

   // FP-> |                     |

   //      |---------------------|

   //      | 2 slots for moves   |

   //      |---------------------|

   //      | lock box (if sync)  |

   //      |---------------------| <- lock_slot_offset

   //      | klass (if static)   |

   //      |---------------------| <- klass_slot_offset

   //      | oopHandle area      |

   //      |---------------------| <- oop_handle_offset (6 java arg registers)

   //      | outbound memory     |

   //      | based arguments     |

   //      |                     |

   //      |---------------------|

   //      |                     |

   // SP-> | out_preserved_slots |

   //

   //

   // Now compute actual number of stack words we need rounding to make

   // stack properly aligned.

   stack_slots = round_to(stack_slots, StackAlignmentInSlots);

   int stack_size = stack_slots * VMRegImpl::stack_slot_size;

   // First thing make an ic check to see if we should even be here

   // We are free to use all registers as temps without saving them and

   // restoring them except rbp. rbp is the only callee save register

   // as far as the interpreter and the compiler(s) are concerned.

   const Register ic_reg = rax;

   const Register receiver = j_rarg0;

   Label hit;

   Label exception_pending;

   assert_different_registers(ic_reg, receiver, rscratch1);

   __ verify_oop(receiver);

   __ load_klass(rscratch1, receiver);

   __ cmpq(ic_reg, rscratch1);

   __ jcc(Assembler::equal, hit);

   __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));

   // Verified entry point must be aligned

   __ align(8);

   __ bind(hit);

   int vep_offset = ((intptr_t)__ pc()) - start;

   // The instruction at the verified entry point must be 5 bytes or longer

   // because it can be patched on the fly by make_non_entrant. The stack bang

   // instruction fits that requirement.

   // Generate stack overflow check

   if (UseStackBanging) {

     __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());

   } else {

     // need a 5 byte instruction to allow MT safe patching to non-entrant

     __ fat_nop();

   }

   // Generate a new frame for the wrapper.

   __ enter();

   // -2 because return address is already present and so is saved rbp

   __ subptr(rsp, stack_size - 2*wordSize);

   // Frame is now completed as far as size and linkage.

   int frame_complete = ((intptr_t)__ pc()) - start;

 #ifdef ASSERT

     {

       Label L;

       __ mov(rax, rsp);

       __ andptr(rax, -16); // must be 16 byte boundary (see amd64 ABI)

       __ cmpptr(rax, rsp);

       __ jcc(Assembler::equal, L);

       __ stop("improperly aligned stack");

       __ bind(L);

     }

 #endif /* ASSERT */

   // We use r14 as the oop handle for the receiver/klass

   // It is callee save so it survives the call to native

   const Register oop_handle_reg = r14;

   if (is_critical_native) {

     check_needs_gc_for_critical_native(masm, stack_slots, total_c_args, total_in_args,

                                        oop_handle_offset, oop_maps, in_regs, in_sig_bt);

   }

   //

   // We immediately shuffle the arguments so that any vm call we have to

   // make from here on out (sync slow path, jvmti, etc.) we will have

   // captured the oops from our caller and have a valid oopMap for

   // them.

   // -----------------

   // The Grand Shuffle

   // The Java calling convention is either equal (linux) or denser (win64) than the

   // c calling convention. However the because of the jni_env argument the c calling

   // convention always has at least one more (and two for static) arguments than Java.

   // Therefore if we move the args from java -> c backwards then we will never have

   // a register->register conflict and we don't have to build a dependency graph

   // and figure out how to break any cycles.

   //

   // Record esp-based slot for receiver on stack for non-static methods

   int receiver_offset = -1;

   // This is a trick. We double the stack slots so we can claim

   // the oops in the caller's frame. Since we are sure to have

   // more args than the caller doubling is enough to make

   // sure we can capture all the incoming oop args from the

   // caller.

   //

   OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);

   // Mark location of rbp (someday)

   // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, vmreg(rbp));

   // Use eax, ebx as temporaries during any memory-memory moves we have to do

   // All inbound args are referenced based on rbp and all outbound args via rsp.

 #ifdef ASSERT

   bool reg_destroyed[RegisterImpl::number_of_registers];

   bool freg_destroyed[XMMRegisterImpl::number_of_registers];

   for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {

     reg_destroyed[r] = false;

   }

   for ( int f = 0 ; f < XMMRegisterImpl::number_of_registers ; f++ ) {

     freg_destroyed[f] = false;

   }

 #endif /* ASSERT */

   // This may iterate in two different directions depending on the

   // kind of native it is.  The reason is that for regular JNI natives

   // the incoming and outgoing registers are offset upwards and for

   // critical natives they are offset down.

   GrowableArray<int> arg_order(2 * total_in_args);

   VMRegPair tmp_vmreg;

   tmp_vmreg.set1(rbx->as_VMReg());

   if (!is_critical_native) {

     for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {

       arg_order.push(i);

       arg_order.push(c_arg);

     }

   } else {

     // Compute a valid move order, using tmp_vmreg to break any cycles

     ComputeMoveOrder cmo(total_in_args, in_regs, total_c_args, out_regs, in_sig_bt, arg_order, tmp_vmreg);

   }

   int temploc = -1;

   for (int ai = 0; ai < arg_order.length(); ai += 2) {

     int i = arg_order.at(ai);

     int c_arg = arg_order.at(ai + 1);

     __ block_comment(err_msg("move %d -> %d", i, c_arg));

     if (c_arg == -1) {

       assert(is_critical_native, "should only be required for critical natives");

       // This arg needs to be moved to a temporary

       __ mov(tmp_vmreg.first()->as_Register(), in_regs[i].first()->as_Register());

       in_regs[i] = tmp_vmreg;

       temploc = i;

       continue;

     } else if (i == -1) {

       assert(is_critical_native, "should only be required for critical natives");

       // Read from the temporary location

       assert(temploc != -1, "must be valid");

       i = temploc;

       temploc = -1;

     }

 #ifdef ASSERT

     if (in_regs[i].first()->is_Register()) {

       assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "destroyed reg!");

     } else if (in_regs[i].first()->is_XMMRegister()) {

       assert(!freg_destroyed[in_regs[i].first()->as_XMMRegister()->encoding()], "destroyed reg!");

     }

     if (out_regs[c_arg].first()->is_Register()) {

       reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;

     } else if (out_regs[c_arg].first()->is_XMMRegister()) {

       freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;

     }

 #endif /* ASSERT */

     switch (in_sig_bt[i]) {

       case T_ARRAY:

         if (is_critical_native) {

           unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg + 1], out_regs[c_arg]);

           c_arg++;

 #ifdef ASSERT

           if (out_regs[c_arg].first()->is_Register()) {

             reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;

           } else if (out_regs[c_arg].first()->is_XMMRegister()) {

             freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;

           }

 #endif

           break;

         }

       case T_OBJECT:

         assert(!is_critical_native, "no oop arguments");

         object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],

                     ((i == 0) && (!is_static)),

                     &receiver_offset);

         break;

       case T_VOID:

         break;

       case T_FLOAT:

         float_move(masm, in_regs[i], out_regs[c_arg]);

           break;

       case T_DOUBLE:

         assert( i + 1 < total_in_args &&

                 in_sig_bt[i + 1] == T_VOID &&

                 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");

         double_move(masm, in_regs[i], out_regs[c_arg]);

         break;

       case T_LONG :

         long_move(masm, in_regs[i], out_regs[c_arg]);

         break;

       case T_ADDRESS: assert(false, "found T_ADDRESS in java args");

       default:

         move32_64(masm, in_regs[i], out_regs[c_arg]);

     }

   }

   int c_arg;

   // Pre-load a static method's oop into r14.  Used both by locking code and

   // the normal JNI call code.

   if (!is_critical_native) {

     // point c_arg at the first arg that is already loaded in case we

     // need to spill before we call out

     c_arg = total_c_args - total_in_args;

     if (method->is_static()) {

       //  load oop into a register

       __ movoop(oop_handle_reg, JNIHandles::make_local(method->method_holder()->java_mirror()));

       // Now handlize the static class mirror it's known not-null.

       __ movptr(Address(rsp, klass_offset), oop_handle_reg);

       map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));

       // Now get the handle

       __ lea(oop_handle_reg, Address(rsp, klass_offset));

       // store the klass handle as second argument

       __ movptr(c_rarg1, oop_handle_reg);

       // and protect the arg if we must spill

       c_arg--;

     }

   } else {

     // For JNI critical methods we need to save all registers in save_args.

     c_arg = 0;

   }

   // Change state to native (we save the return address in the thread, since it might not

   // be pushed on the stack when we do a a stack traversal). It is enough that the pc()

   // points into the right code segment. It does not have to be the correct return pc.

   // We use the same pc/oopMap repeatedly when we call out

   intptr_t the_pc = (intptr_t) __ pc();

   oop_maps->add_gc_map(the_pc - start, map);

   __ set_last_Java_frame(rsp, noreg, (address)the_pc);

   // We have all of the arguments setup at this point. We must not touch any register

   // argument registers at this point (what if we save/restore them there are no oop?

   {

     SkipIfEqual skip(masm, &DTraceMethodProbes, false);

     // protect the args we've loaded

     save_args(masm, total_c_args, c_arg, out_regs);

     __ mov_metadata(c_rarg1, method());

     __ call_VM_leaf(

       CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),

       r15_thread, c_rarg1);

     restore_args(masm, total_c_args, c_arg, out_regs);

   }

   // RedefineClasses() tracing support for obsolete method entry

   if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {

     // protect the args we've loaded

     save_args(masm, total_c_args, c_arg, out_regs);

     __ mov_metadata(c_rarg1, method());

     __ call_VM_leaf(

       CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),

       r15_thread, c_rarg1);

     restore_args(masm, total_c_args, c_arg, out_regs);

   }

   // Lock a synchronized method

   // Register definitions used by locking and unlocking

   const Register swap_reg = rax;  // Must use rax for cmpxchg instruction

   const Register obj_reg  = rbx;  // Will contain the oop

   const Register lock_reg = r13;  // Address of compiler lock object (BasicLock)

   const Register old_hdr  = r13;  // value of old header at unlock time

   Label slow_path_lock;

   Label lock_done;

   if (method->is_synchronized()) {

     assert(!is_critical_native, "unhandled");

     const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();

     // Get the handle (the 2nd argument)

     __ mov(oop_handle_reg, c_rarg1);

     // Get address of the box

     __ lea(lock_reg, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));

     // Load the oop from the handle

     __ movptr(obj_reg, Address(oop_handle_reg, 0));

     if (UseBiasedLocking) {

       __ biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, lock_done, &slow_path_lock);

     }

     // Load immediate 1 into swap_reg %rax

     __ movl(swap_reg, 1);

     // Load (object->mark() | 1) into swap_reg %rax

     __ orptr(swap_reg, Address(obj_reg, 0));

     // Save (object->mark() | 1) into BasicLock's displaced header

     __ movptr(Address(lock_reg, mark_word_offset), swap_reg);

     if (os::is_MP()) {

       __ lock();

     }

     // src -> dest iff dest == rax else rax <- dest

     __ cmpxchgptr(lock_reg, Address(obj_reg, 0));

     __ jcc(Assembler::equal, lock_done);

     // Hmm should this move to the slow path code area???

     // Test if the oopMark is an obvious stack pointer, i.e.,

     //  1) (mark & 3) == 0, and

     //  2) rsp <= mark < mark + os::pagesize()

     // These 3 tests can be done by evaluating the following

     // expression: ((mark - rsp) & (3 - os::vm_page_size())),

     // assuming both stack pointer and pagesize have their

     // least significant 2 bits clear.

     // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg

     __ subptr(swap_reg, rsp);

     __ andptr(swap_reg, 3 - os::vm_page_size());

     // Save the test result, for recursive case, the result is zero

     __ movptr(Address(lock_reg, mark_word_offset), swap_reg);

     __ jcc(Assembler::notEqual, slow_path_lock);

     // Slow path will re-enter here

     __ bind(lock_done);

   }

   // Finally just about ready to make the JNI call

   // get JNIEnv* which is first argument to native

   if (!is_critical_native) {

     __ lea(c_rarg0, Address(r15_thread, in_bytes(JavaThread::jni_environment_offset())));

   }

   // Now set thread in native

   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native);

   __ call(RuntimeAddress(native_func));

   // Verify or restore cpu control state after JNI call

   __ restore_cpu_control_state_after_jni();

   // Unpack native results.

   switch (ret_type) {

   case T_BOOLEAN: __ c2bool(rax);            break;

   case T_CHAR   : __ movzwl(rax, rax);      break;

   case T_BYTE   : __ sign_extend_byte (rax); break;

   case T_SHORT  : __ sign_extend_short(rax); break;

   case T_INT    : /* nothing to do */        break;

   case T_DOUBLE :

   case T_FLOAT  :

     // Result is in xmm0 we'll save as needed

     break;

   case T_ARRAY:                 // Really a handle

   case T_OBJECT:                // Really a handle

       break; // can't de-handlize until after safepoint check

   case T_VOID: break;

   case T_LONG: break;

   default       : ShouldNotReachHere();

   }

   // Switch thread to "native transition" state before reading the synchronization state.

   // This additional state is necessary because reading and testing the synchronization

   // state is not atomic w.r.t. GC, as this scenario demonstrates:

   //     Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.

   //     VM thread changes sync state to synchronizing and suspends threads for GC.

   //     Thread A is resumed to finish this native method, but doesn't block here since it

   //     didn't see any synchronization is progress, and escapes.

   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native_trans);

   if(os::is_MP()) {

     if (UseMembar) {

       // Force this write out before the read below

       __ membar(Assembler::Membar_mask_bits(

            Assembler::LoadLoad | Assembler::LoadStore |

            Assembler::StoreLoad | Assembler::StoreStore));

     } else {

       // Write serialization page so VM thread can do a pseudo remote membar.

       // We use the current thread pointer to calculate a thread specific

       // offset to write to within the page. This minimizes bus traffic

       // due to cache line collision.

       __ serialize_memory(r15_thread, rcx);

     }

   }

   Label after_transition;

   // check for safepoint operation in progress and/or pending suspend requests

   {

     Label Continue;

     __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),

              SafepointSynchronize::_not_synchronized);

     Label L;

     __ jcc(Assembler::notEqual, L);

     __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);

     __ jcc(Assembler::equal, Continue);

     __ bind(L);

     // Don't use call_VM as it will see a possible pending exception and forward it

     // and never return here preventing us from clearing _last_native_pc down below.

     // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are

     // preserved and correspond to the bcp/locals pointers. So we do a runtime call

     // by hand.

     //

     save_native_result(masm, ret_type, stack_slots);

     __ mov(c_rarg0, r15_thread);

     __ mov(r12, rsp); // remember sp

     __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows

     __ andptr(rsp, -16); // align stack as required by ABI

     if (!is_critical_native) {

       __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));

     } else {

       __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans_and_transition)));

     }

     __ mov(rsp, r12); // restore sp

     __ reinit_heapbase();

     // Restore any method result value

     restore_native_result(masm, ret_type, stack_slots);

     if (is_critical_native) {

       // The call above performed the transition to thread_in_Java so

       // skip the transition logic below.

       __ jmpb(after_transition);

     }

     __ bind(Continue);

   }

   // change thread state

   __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);

   __ bind(after_transition);

   Label reguard;

   Label reguard_done;

   __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);

   __ jcc(Assembler::equal, reguard);

   __ bind(reguard_done);

   // native result if any is live

   // Unlock

   Label unlock_done;

   Label slow_path_unlock;

   if (method->is_synchronized()) {

     // Get locked oop from the handle we passed to jni

     __ movptr(obj_reg, Address(oop_handle_reg, 0));

     Label done;

     if (UseBiasedLocking) {

       __ biased_locking_exit(obj_reg, old_hdr, done);

     }

     // Simple recursive lock?

     __ cmpptr(Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size), (int32_t)NULL_WORD);

     __ jcc(Assembler::equal, done);

     // Must save rax if if it is live now because cmpxchg must use it

     if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {

       save_native_result(masm, ret_type, stack_slots);

     }

     // get address of the stack lock

     __ lea(rax, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));

     //  get old displaced header

     __ movptr(old_hdr, Address(rax, 0));

     // Atomic swap old header if oop still contains the stack lock

     if (os::is_MP()) {

       __ lock();

     }

     __ cmpxchgptr(old_hdr, Address(obj_reg, 0));

     __ jcc(Assembler::notEqual, slow_path_unlock);

     // slow path re-enters here

     __ bind(unlock_done);

     if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {

       restore_native_result(masm, ret_type, stack_slots);

     }

     __ bind(done);

   }

   {

     SkipIfEqual skip(masm, &DTraceMethodProbes, false);

     save_native_result(masm, ret_type, stack_slots);

     __ mov_metadata(c_rarg1, method());

     __ call_VM_leaf(

          CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),

          r15_thread, c_rarg1);

     restore_native_result(masm, ret_type, stack_slots);

   }

   __ reset_last_Java_frame(false, true);

   // Unpack oop result

   if (ret_type == T_OBJECT || ret_type == T_ARRAY) {

       Label L;

       __ testptr(rax, rax);

       __ jcc(Assembler::zero, L);

       __ movptr(rax, Address(rax, 0));

       __ bind(L);

       __ verify_oop(rax);

   }

   if (!is_critical_native) {

     // reset handle block

     __ movptr(rcx, Address(r15_thread, JavaThread::active_handles_offset()));

     __ movptr(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);

   }

   // pop our frame

   __ leave();

   if (!is_critical_native) {

     // Any exception pending?

     __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);

     __ jcc(Assembler::notEqual, exception_pending);

   }

   // Return

   __ ret(0);

   // Unexpected paths are out of line and go here

   if (!is_critical_native) {

     // forward the exception

     __ bind(exception_pending);

     // and forward the exception

     __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));

   }

   // Slow path locking & unlocking

   if (method->is_synchronized()) {

     // BEGIN Slow path lock

     __ bind(slow_path_lock);

     // has last_Java_frame setup. No exceptions so do vanilla call not call_VM

     // args are (oop obj, BasicLock* lock, JavaThread* thread)

     // protect the args we've loaded

     save_args(masm, total_c_args, c_arg, out_regs);

     __ mov(c_rarg0, obj_reg);

     __ mov(c_rarg1, lock_reg);

     __ mov(c_rarg2, r15_thread);

     // Not a leaf but we have last_Java_frame setup as we want

     __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), 3);

     restore_args(masm, total_c_args, c_arg, out_regs);

 #ifdef ASSERT

     { Label L;

     __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);

     __ jcc(Assembler::equal, L);

     __ stop("no pending exception allowed on exit from monitorenter");

     __ bind(L);

     }

 #endif

     __ jmp(lock_done);

     // END Slow path lock

     // BEGIN Slow path unlock

     __ bind(slow_path_unlock);

     // If we haven't already saved the native result we must save it now as xmm registers

     // are still exposed.

     if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {

       save_native_result(masm, ret_type, stack_slots);

     }

     __ lea(c_rarg1, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));

     __ mov(c_rarg0, obj_reg);

     __ mov(r12, rsp); // remember sp

     __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows

     __ andptr(rsp, -16); // align stack as required by ABI

     // Save pending exception around call to VM (which contains an EXCEPTION_MARK)

     // NOTE that obj_reg == rbx currently

     __ movptr(rbx, Address(r15_thread, in_bytes(Thread::pending_exception_offset())));

     __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);

     __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));

     __ mov(rsp, r12); // restore sp

     __ reinit_heapbase();

 #ifdef ASSERT

     {

       Label L;

       __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);

       __ jcc(Assembler::equal, L);

       __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");

       __ bind(L);

     }

 #endif /* ASSERT */

     __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), rbx);

     if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {

       restore_native_result(masm, ret_type, stack_slots);

     }

     __ jmp(unlock_done);

     // END Slow path unlock

   } // synchronized

   // SLOW PATH Reguard the stack if needed

   __ bind(reguard);

   save_native_result(masm, ret_type, stack_slots);

   __ mov(r12, rsp); // remember sp

   __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows

   __ andptr(rsp, -16); // align stack as required by ABI

   __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));

   __ mov(rsp, r12); // restore sp

   __ reinit_heapbase();

   restore_native_result(masm, ret_type, stack_slots);

   // and continue

   __ jmp(reguard_done);

   __ flush();

   nmethod *nm = nmethod::new_native_nmethod(method,

                                             compile_id,

                                             masm->code(),

                                             vep_offset,

                                             frame_complete,

                                             stack_slots / VMRegImpl::slots_per_word,

                                             (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),

                                             in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),

                                             oop_maps);

   if (is_critical_native) {

     nm->set_lazy_critical_native(true);

   }

   return nm;

 }