Mon, 26 Sep 2011 10:24:05 -0700
7081933: Use zeroing elimination optimization for large array
Summary: Don't zero new typeArray during runtime call if the allocation is followed by arraycopy into it.
Reviewed-by: twisti
1 /*
2 * Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/assembler.hpp"
27 #include "interpreter/bytecodeHistogram.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "interpreter/interpreterGenerator.hpp"
30 #include "interpreter/interpreterRuntime.hpp"
31 #include "interpreter/templateTable.hpp"
32 #include "oops/arrayOop.hpp"
33 #include "oops/methodDataOop.hpp"
34 #include "oops/methodOop.hpp"
35 #include "oops/oop.inline.hpp"
36 #include "prims/jvmtiExport.hpp"
37 #include "prims/jvmtiThreadState.hpp"
38 #include "runtime/arguments.hpp"
39 #include "runtime/deoptimization.hpp"
40 #include "runtime/frame.inline.hpp"
41 #include "runtime/sharedRuntime.hpp"
42 #include "runtime/stubRoutines.hpp"
43 #include "runtime/synchronizer.hpp"
44 #include "runtime/timer.hpp"
45 #include "runtime/vframeArray.hpp"
46 #include "utilities/debug.hpp"
48 #ifndef CC_INTERP
49 #ifndef FAST_DISPATCH
50 #define FAST_DISPATCH 1
51 #endif
52 #undef FAST_DISPATCH
55 // Generation of Interpreter
56 //
57 // The InterpreterGenerator generates the interpreter into Interpreter::_code.
60 #define __ _masm->
63 //----------------------------------------------------------------------------------------------------
66 void InterpreterGenerator::save_native_result(void) {
67 // result potentially in O0/O1: save it across calls
68 const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
70 // result potentially in F0/F1: save it across calls
71 const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
73 // save and restore any potential method result value around the unlocking operation
74 __ stf(FloatRegisterImpl::D, F0, d_tmp);
75 #ifdef _LP64
76 __ stx(O0, l_tmp);
77 #else
78 __ std(O0, l_tmp);
79 #endif
80 }
82 void InterpreterGenerator::restore_native_result(void) {
83 const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
84 const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
86 // Restore any method result value
87 __ ldf(FloatRegisterImpl::D, d_tmp, F0);
88 #ifdef _LP64
89 __ ldx(l_tmp, O0);
90 #else
91 __ ldd(l_tmp, O0);
92 #endif
93 }
95 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) {
96 assert(!pass_oop || message == NULL, "either oop or message but not both");
97 address entry = __ pc();
98 // expression stack must be empty before entering the VM if an exception happened
99 __ empty_expression_stack();
100 // load exception object
101 __ set((intptr_t)name, G3_scratch);
102 if (pass_oop) {
103 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), G3_scratch, Otos_i);
104 } else {
105 __ set((intptr_t)message, G4_scratch);
106 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), G3_scratch, G4_scratch);
107 }
108 // throw exception
109 assert(Interpreter::throw_exception_entry() != NULL, "generate it first");
110 AddressLiteral thrower(Interpreter::throw_exception_entry());
111 __ jump_to(thrower, G3_scratch);
112 __ delayed()->nop();
113 return entry;
114 }
116 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
117 address entry = __ pc();
118 // expression stack must be empty before entering the VM if an exception
119 // happened
120 __ empty_expression_stack();
121 // load exception object
122 __ call_VM(Oexception,
123 CAST_FROM_FN_PTR(address,
124 InterpreterRuntime::throw_ClassCastException),
125 Otos_i);
126 __ should_not_reach_here();
127 return entry;
128 }
131 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) {
132 address entry = __ pc();
133 // expression stack must be empty before entering the VM if an exception happened
134 __ empty_expression_stack();
135 // convention: expect aberrant index in register G3_scratch, then shuffle the
136 // index to G4_scratch for the VM call
137 __ mov(G3_scratch, G4_scratch);
138 __ set((intptr_t)name, G3_scratch);
139 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException), G3_scratch, G4_scratch);
140 __ should_not_reach_here();
141 return entry;
142 }
145 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
146 address entry = __ pc();
147 // expression stack must be empty before entering the VM if an exception happened
148 __ empty_expression_stack();
149 __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
150 __ should_not_reach_here();
151 return entry;
152 }
155 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
156 TosState incoming_state = state;
158 Label cont;
159 address compiled_entry = __ pc();
161 address entry = __ pc();
162 #if !defined(_LP64) && defined(COMPILER2)
163 // All return values are where we want them, except for Longs. C2 returns
164 // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1.
165 // Since the interpreter will return longs in G1 and O0/O1 in the 32bit
166 // build even if we are returning from interpreted we just do a little
167 // stupid shuffing.
168 // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to
169 // do this here. Unfortunately if we did a rethrow we'd see an machepilog node
170 // first which would move g1 -> O0/O1 and destroy the exception we were throwing.
172 if (incoming_state == ltos) {
173 __ srl (G1, 0, O1);
174 __ srlx(G1, 32, O0);
175 }
176 #endif // !_LP64 && COMPILER2
178 __ bind(cont);
180 // The callee returns with the stack possibly adjusted by adapter transition
181 // We remove that possible adjustment here.
182 // All interpreter local registers are untouched. Any result is passed back
183 // in the O0/O1 or float registers. Before continuing, the arguments must be
184 // popped from the java expression stack; i.e., Lesp must be adjusted.
186 __ mov(Llast_SP, SP); // Remove any adapter added stack space.
188 Label L_got_cache, L_giant_index;
189 const Register cache = G3_scratch;
190 const Register size = G1_scratch;
191 if (EnableInvokeDynamic) {
192 __ ldub(Address(Lbcp, 0), G1_scratch); // Load current bytecode.
193 __ cmp_and_br_short(G1_scratch, Bytecodes::_invokedynamic, Assembler::equal, Assembler::pn, L_giant_index);
194 }
195 __ get_cache_and_index_at_bcp(cache, G1_scratch, 1);
196 __ bind(L_got_cache);
197 __ ld_ptr(cache, constantPoolCacheOopDesc::base_offset() +
198 ConstantPoolCacheEntry::flags_offset(), size);
199 __ and3(size, 0xFF, size); // argument size in words
200 __ sll(size, Interpreter::logStackElementSize, size); // each argument size in bytes
201 __ add(Lesp, size, Lesp); // pop arguments
202 __ dispatch_next(state, step);
204 // out of the main line of code...
205 if (EnableInvokeDynamic) {
206 __ bind(L_giant_index);
207 __ get_cache_and_index_at_bcp(cache, G1_scratch, 1, sizeof(u4));
208 __ ba_short(L_got_cache);
209 }
211 return entry;
212 }
215 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) {
216 address entry = __ pc();
217 __ get_constant_pool_cache(LcpoolCache); // load LcpoolCache
218 { Label L;
219 Address exception_addr(G2_thread, Thread::pending_exception_offset());
220 __ ld_ptr(exception_addr, Gtemp); // Load pending exception.
221 __ br_null_short(Gtemp, Assembler::pt, L);
222 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
223 __ should_not_reach_here();
224 __ bind(L);
225 }
226 __ dispatch_next(state, step);
227 return entry;
228 }
230 // A result handler converts/unboxes a native call result into
231 // a java interpreter/compiler result. The current frame is an
232 // interpreter frame. The activation frame unwind code must be
233 // consistent with that of TemplateTable::_return(...). In the
234 // case of native methods, the caller's SP was not modified.
235 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) {
236 address entry = __ pc();
237 Register Itos_i = Otos_i ->after_save();
238 Register Itos_l = Otos_l ->after_save();
239 Register Itos_l1 = Otos_l1->after_save();
240 Register Itos_l2 = Otos_l2->after_save();
241 switch (type) {
242 case T_BOOLEAN: __ subcc(G0, O0, G0); __ addc(G0, 0, Itos_i); break; // !0 => true; 0 => false
243 case T_CHAR : __ sll(O0, 16, O0); __ srl(O0, 16, Itos_i); break; // cannot use and3, 0xFFFF too big as immediate value!
244 case T_BYTE : __ sll(O0, 24, O0); __ sra(O0, 24, Itos_i); break;
245 case T_SHORT : __ sll(O0, 16, O0); __ sra(O0, 16, Itos_i); break;
246 case T_LONG :
247 #ifndef _LP64
248 __ mov(O1, Itos_l2); // move other half of long
249 #endif // ifdef or no ifdef, fall through to the T_INT case
250 case T_INT : __ mov(O0, Itos_i); break;
251 case T_VOID : /* nothing to do */ break;
252 case T_FLOAT : assert(F0 == Ftos_f, "fix this code" ); break;
253 case T_DOUBLE : assert(F0 == Ftos_d, "fix this code" ); break;
254 case T_OBJECT :
255 __ ld_ptr(FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS, Itos_i);
256 __ verify_oop(Itos_i);
257 break;
258 default : ShouldNotReachHere();
259 }
260 __ ret(); // return from interpreter activation
261 __ delayed()->restore(I5_savedSP, G0, SP); // remove interpreter frame
262 NOT_PRODUCT(__ emit_long(0);) // marker for disassembly
263 return entry;
264 }
266 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) {
267 address entry = __ pc();
268 __ push(state);
269 __ call_VM(noreg, runtime_entry);
270 __ dispatch_via(vtos, Interpreter::normal_table(vtos));
271 return entry;
272 }
275 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
276 address entry = __ pc();
277 __ dispatch_next(state);
278 return entry;
279 }
281 //
282 // Helpers for commoning out cases in the various type of method entries.
283 //
285 // increment invocation count & check for overflow
286 //
287 // Note: checking for negative value instead of overflow
288 // so we have a 'sticky' overflow test
289 //
290 // Lmethod: method
291 // ??: invocation counter
292 //
293 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) {
294 // Note: In tiered we increment either counters in methodOop or in MDO depending if we're profiling or not.
295 if (TieredCompilation) {
296 const int increment = InvocationCounter::count_increment;
297 const int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift;
298 Label no_mdo, done;
299 if (ProfileInterpreter) {
300 // If no method data exists, go to profile_continue.
301 __ ld_ptr(Lmethod, methodOopDesc::method_data_offset(), G4_scratch);
302 __ br_null_short(G4_scratch, Assembler::pn, no_mdo);
303 // Increment counter
304 Address mdo_invocation_counter(G4_scratch,
305 in_bytes(methodDataOopDesc::invocation_counter_offset()) +
306 in_bytes(InvocationCounter::counter_offset()));
307 __ increment_mask_and_jump(mdo_invocation_counter, increment, mask,
308 G3_scratch, Lscratch,
309 Assembler::zero, overflow);
310 __ ba_short(done);
311 }
313 // Increment counter in methodOop
314 __ bind(no_mdo);
315 Address invocation_counter(Lmethod,
316 in_bytes(methodOopDesc::invocation_counter_offset()) +
317 in_bytes(InvocationCounter::counter_offset()));
318 __ increment_mask_and_jump(invocation_counter, increment, mask,
319 G3_scratch, Lscratch,
320 Assembler::zero, overflow);
321 __ bind(done);
322 } else {
323 // Update standard invocation counters
324 __ increment_invocation_counter(O0, G3_scratch);
325 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
326 Address interpreter_invocation_counter(Lmethod,in_bytes(methodOopDesc::interpreter_invocation_counter_offset()));
327 __ ld(interpreter_invocation_counter, G3_scratch);
328 __ inc(G3_scratch);
329 __ st(G3_scratch, interpreter_invocation_counter);
330 }
332 if (ProfileInterpreter && profile_method != NULL) {
333 // Test to see if we should create a method data oop
334 AddressLiteral profile_limit((address)&InvocationCounter::InterpreterProfileLimit);
335 __ load_contents(profile_limit, G3_scratch);
336 __ cmp_and_br_short(O0, G3_scratch, Assembler::lessUnsigned, Assembler::pn, *profile_method_continue);
338 // if no method data exists, go to profile_method
339 __ test_method_data_pointer(*profile_method);
340 }
342 AddressLiteral invocation_limit((address)&InvocationCounter::InterpreterInvocationLimit);
343 __ load_contents(invocation_limit, G3_scratch);
344 __ cmp(O0, G3_scratch);
345 __ br(Assembler::greaterEqualUnsigned, false, Assembler::pn, *overflow); // Far distance
346 __ delayed()->nop();
347 }
349 }
351 // Allocate monitor and lock method (asm interpreter)
352 // ebx - methodOop
353 //
354 void InterpreterGenerator::lock_method(void) {
355 __ ld(Lmethod, in_bytes(methodOopDesc::access_flags_offset()), O0); // Load access flags.
357 #ifdef ASSERT
358 { Label ok;
359 __ btst(JVM_ACC_SYNCHRONIZED, O0);
360 __ br( Assembler::notZero, false, Assembler::pt, ok);
361 __ delayed()->nop();
362 __ stop("method doesn't need synchronization");
363 __ bind(ok);
364 }
365 #endif // ASSERT
367 // get synchronization object to O0
368 { Label done;
369 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
370 __ btst(JVM_ACC_STATIC, O0);
371 __ br( Assembler::zero, true, Assembler::pt, done);
372 __ delayed()->ld_ptr(Llocals, Interpreter::local_offset_in_bytes(0), O0); // get receiver for not-static case
374 __ ld_ptr( Lmethod, in_bytes(methodOopDesc::constants_offset()), O0);
375 __ ld_ptr( O0, constantPoolOopDesc::pool_holder_offset_in_bytes(), O0);
377 // lock the mirror, not the klassOop
378 __ ld_ptr( O0, mirror_offset, O0);
380 #ifdef ASSERT
381 __ tst(O0);
382 __ breakpoint_trap(Assembler::zero);
383 #endif // ASSERT
385 __ bind(done);
386 }
388 __ add_monitor_to_stack(true, noreg, noreg); // allocate monitor elem
389 __ st_ptr( O0, Lmonitors, BasicObjectLock::obj_offset_in_bytes()); // store object
390 // __ untested("lock_object from method entry");
391 __ lock_object(Lmonitors, O0);
392 }
395 void TemplateInterpreterGenerator::generate_stack_overflow_check(Register Rframe_size,
396 Register Rscratch,
397 Register Rscratch2) {
398 const int page_size = os::vm_page_size();
399 Address saved_exception_pc(G2_thread, JavaThread::saved_exception_pc_offset());
400 Label after_frame_check;
402 assert_different_registers(Rframe_size, Rscratch, Rscratch2);
404 __ set(page_size, Rscratch);
405 __ cmp_and_br_short(Rframe_size, Rscratch, Assembler::lessEqual, Assembler::pt, after_frame_check);
407 // get the stack base, and in debug, verify it is non-zero
408 __ ld_ptr( G2_thread, Thread::stack_base_offset(), Rscratch );
409 #ifdef ASSERT
410 Label base_not_zero;
411 __ br_notnull_short(Rscratch, Assembler::pn, base_not_zero);
412 __ stop("stack base is zero in generate_stack_overflow_check");
413 __ bind(base_not_zero);
414 #endif
416 // get the stack size, and in debug, verify it is non-zero
417 assert( sizeof(size_t) == sizeof(intptr_t), "wrong load size" );
418 __ ld_ptr( G2_thread, Thread::stack_size_offset(), Rscratch2 );
419 #ifdef ASSERT
420 Label size_not_zero;
421 __ br_notnull_short(Rscratch2, Assembler::pn, size_not_zero);
422 __ stop("stack size is zero in generate_stack_overflow_check");
423 __ bind(size_not_zero);
424 #endif
426 // compute the beginning of the protected zone minus the requested frame size
427 __ sub( Rscratch, Rscratch2, Rscratch );
428 __ set( (StackRedPages+StackYellowPages) * page_size, Rscratch2 );
429 __ add( Rscratch, Rscratch2, Rscratch );
431 // Add in the size of the frame (which is the same as subtracting it from the
432 // SP, which would take another register
433 __ add( Rscratch, Rframe_size, Rscratch );
435 // the frame is greater than one page in size, so check against
436 // the bottom of the stack
437 __ cmp_and_brx_short(SP, Rscratch, Assembler::greater, Assembler::pt, after_frame_check);
439 // Save the return address as the exception pc
440 __ st_ptr(O7, saved_exception_pc);
442 // the stack will overflow, throw an exception
443 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
445 // if you get to here, then there is enough stack space
446 __ bind( after_frame_check );
447 }
450 //
451 // Generate a fixed interpreter frame. This is identical setup for interpreted
452 // methods and for native methods hence the shared code.
454 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
455 //
456 //
457 // The entry code sets up a new interpreter frame in 4 steps:
458 //
459 // 1) Increase caller's SP by for the extra local space needed:
460 // (check for overflow)
461 // Efficient implementation of xload/xstore bytecodes requires
462 // that arguments and non-argument locals are in a contigously
463 // addressable memory block => non-argument locals must be
464 // allocated in the caller's frame.
465 //
466 // 2) Create a new stack frame and register window:
467 // The new stack frame must provide space for the standard
468 // register save area, the maximum java expression stack size,
469 // the monitor slots (0 slots initially), and some frame local
470 // scratch locations.
471 //
472 // 3) The following interpreter activation registers must be setup:
473 // Lesp : expression stack pointer
474 // Lbcp : bytecode pointer
475 // Lmethod : method
476 // Llocals : locals pointer
477 // Lmonitors : monitor pointer
478 // LcpoolCache: constant pool cache
479 //
480 // 4) Initialize the non-argument locals if necessary:
481 // Non-argument locals may need to be initialized to NULL
482 // for GC to work. If the oop-map information is accurate
483 // (in the absence of the JSR problem), no initialization
484 // is necessary.
485 //
486 // (gri - 2/25/2000)
489 const Address size_of_parameters(G5_method, methodOopDesc::size_of_parameters_offset());
490 const Address size_of_locals (G5_method, methodOopDesc::size_of_locals_offset());
491 const Address max_stack (G5_method, methodOopDesc::max_stack_offset());
492 int rounded_vm_local_words = round_to( frame::interpreter_frame_vm_local_words, WordsPerLong );
494 const int extra_space =
495 rounded_vm_local_words + // frame local scratch space
496 //6815692//methodOopDesc::extra_stack_words() + // extra push slots for MH adapters
497 frame::memory_parameter_word_sp_offset + // register save area
498 (native_call ? frame::interpreter_frame_extra_outgoing_argument_words : 0);
500 const Register Glocals_size = G3;
501 const Register Otmp1 = O3;
502 const Register Otmp2 = O4;
503 // Lscratch can't be used as a temporary because the call_stub uses
504 // it to assert that the stack frame was setup correctly.
506 __ lduh( size_of_parameters, Glocals_size);
508 // Gargs points to first local + BytesPerWord
509 // Set the saved SP after the register window save
510 //
511 assert_different_registers(Gargs, Glocals_size, Gframe_size, O5_savedSP);
512 __ sll(Glocals_size, Interpreter::logStackElementSize, Otmp1);
513 __ add(Gargs, Otmp1, Gargs);
515 if (native_call) {
516 __ calc_mem_param_words( Glocals_size, Gframe_size );
517 __ add( Gframe_size, extra_space, Gframe_size);
518 __ round_to( Gframe_size, WordsPerLong );
519 __ sll( Gframe_size, LogBytesPerWord, Gframe_size );
520 } else {
522 //
523 // Compute number of locals in method apart from incoming parameters
524 //
525 __ lduh( size_of_locals, Otmp1 );
526 __ sub( Otmp1, Glocals_size, Glocals_size );
527 __ round_to( Glocals_size, WordsPerLong );
528 __ sll( Glocals_size, Interpreter::logStackElementSize, Glocals_size );
530 // see if the frame is greater than one page in size. If so,
531 // then we need to verify there is enough stack space remaining
532 // Frame_size = (max_stack + extra_space) * BytesPerWord;
533 __ lduh( max_stack, Gframe_size );
534 __ add( Gframe_size, extra_space, Gframe_size );
535 __ round_to( Gframe_size, WordsPerLong );
536 __ sll( Gframe_size, Interpreter::logStackElementSize, Gframe_size);
538 // Add in java locals size for stack overflow check only
539 __ add( Gframe_size, Glocals_size, Gframe_size );
541 const Register Otmp2 = O4;
542 assert_different_registers(Otmp1, Otmp2, O5_savedSP);
543 generate_stack_overflow_check(Gframe_size, Otmp1, Otmp2);
545 __ sub( Gframe_size, Glocals_size, Gframe_size);
547 //
548 // bump SP to accomodate the extra locals
549 //
550 __ sub( SP, Glocals_size, SP );
551 }
553 //
554 // now set up a stack frame with the size computed above
555 //
556 __ neg( Gframe_size );
557 __ save( SP, Gframe_size, SP );
559 //
560 // now set up all the local cache registers
561 //
562 // NOTE: At this point, Lbyte_code/Lscratch has been modified. Note
563 // that all present references to Lbyte_code initialize the register
564 // immediately before use
565 if (native_call) {
566 __ mov(G0, Lbcp);
567 } else {
568 __ ld_ptr(G5_method, methodOopDesc::const_offset(), Lbcp);
569 __ add(Lbcp, in_bytes(constMethodOopDesc::codes_offset()), Lbcp);
570 }
571 __ mov( G5_method, Lmethod); // set Lmethod
572 __ get_constant_pool_cache( LcpoolCache ); // set LcpoolCache
573 __ sub(FP, rounded_vm_local_words * BytesPerWord, Lmonitors ); // set Lmonitors
574 #ifdef _LP64
575 __ add( Lmonitors, STACK_BIAS, Lmonitors ); // Account for 64 bit stack bias
576 #endif
577 __ sub(Lmonitors, BytesPerWord, Lesp); // set Lesp
579 // setup interpreter activation registers
580 __ sub(Gargs, BytesPerWord, Llocals); // set Llocals
582 if (ProfileInterpreter) {
583 #ifdef FAST_DISPATCH
584 // FAST_DISPATCH and ProfileInterpreter are mutually exclusive since
585 // they both use I2.
586 assert(0, "FAST_DISPATCH and +ProfileInterpreter are mutually exclusive");
587 #endif // FAST_DISPATCH
588 __ set_method_data_pointer();
589 }
591 }
593 // Empty method, generate a very fast return.
595 address InterpreterGenerator::generate_empty_entry(void) {
597 // A method that does nother but return...
599 address entry = __ pc();
600 Label slow_path;
602 __ verify_oop(G5_method);
604 // do nothing for empty methods (do not even increment invocation counter)
605 if ( UseFastEmptyMethods) {
606 // If we need a safepoint check, generate full interpreter entry.
607 AddressLiteral sync_state(SafepointSynchronize::address_of_state());
608 __ set(sync_state, G3_scratch);
609 __ cmp_and_br_short(G3_scratch, SafepointSynchronize::_not_synchronized, Assembler::notEqual, Assembler::pn, slow_path);
611 // Code: _return
612 __ retl();
613 __ delayed()->mov(O5_savedSP, SP);
615 __ bind(slow_path);
616 (void) generate_normal_entry(false);
618 return entry;
619 }
620 return NULL;
621 }
623 // Call an accessor method (assuming it is resolved, otherwise drop into
624 // vanilla (slow path) entry
626 // Generates code to elide accessor methods
627 // Uses G3_scratch and G1_scratch as scratch
628 address InterpreterGenerator::generate_accessor_entry(void) {
630 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof;
631 // parameter size = 1
632 // Note: We can only use this code if the getfield has been resolved
633 // and if we don't have a null-pointer exception => check for
634 // these conditions first and use slow path if necessary.
635 address entry = __ pc();
636 Label slow_path;
639 // XXX: for compressed oops pointer loading and decoding doesn't fit in
640 // delay slot and damages G1
641 if ( UseFastAccessorMethods && !UseCompressedOops ) {
642 // Check if we need to reach a safepoint and generate full interpreter
643 // frame if so.
644 AddressLiteral sync_state(SafepointSynchronize::address_of_state());
645 __ load_contents(sync_state, G3_scratch);
646 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
647 __ cmp_and_br_short(G3_scratch, SafepointSynchronize::_not_synchronized, Assembler::notEqual, Assembler::pn, slow_path);
649 // Check if local 0 != NULL
650 __ ld_ptr(Gargs, G0, Otos_i ); // get local 0
651 // check if local 0 == NULL and go the slow path
652 __ br_null_short(Otos_i, Assembler::pn, slow_path);
655 // read first instruction word and extract bytecode @ 1 and index @ 2
656 // get first 4 bytes of the bytecodes (big endian!)
657 __ ld_ptr(G5_method, methodOopDesc::const_offset(), G1_scratch);
658 __ ld(G1_scratch, constMethodOopDesc::codes_offset(), G1_scratch);
660 // move index @ 2 far left then to the right most two bytes.
661 __ sll(G1_scratch, 2*BitsPerByte, G1_scratch);
662 __ srl(G1_scratch, 2*BitsPerByte - exact_log2(in_words(
663 ConstantPoolCacheEntry::size()) * BytesPerWord), G1_scratch);
665 // get constant pool cache
666 __ ld_ptr(G5_method, methodOopDesc::constants_offset(), G3_scratch);
667 __ ld_ptr(G3_scratch, constantPoolOopDesc::cache_offset_in_bytes(), G3_scratch);
669 // get specific constant pool cache entry
670 __ add(G3_scratch, G1_scratch, G3_scratch);
672 // Check the constant Pool cache entry to see if it has been resolved.
673 // If not, need the slow path.
674 ByteSize cp_base_offset = constantPoolCacheOopDesc::base_offset();
675 __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::indices_offset(), G1_scratch);
676 __ srl(G1_scratch, 2*BitsPerByte, G1_scratch);
677 __ and3(G1_scratch, 0xFF, G1_scratch);
678 __ cmp_and_br_short(G1_scratch, Bytecodes::_getfield, Assembler::notEqual, Assembler::pn, slow_path);
680 // Get the type and return field offset from the constant pool cache
681 __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::flags_offset(), G1_scratch);
682 __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::f2_offset(), G3_scratch);
684 Label xreturn_path;
685 // Need to differentiate between igetfield, agetfield, bgetfield etc.
686 // because they are different sizes.
687 // Get the type from the constant pool cache
688 __ srl(G1_scratch, ConstantPoolCacheEntry::tosBits, G1_scratch);
689 // Make sure we don't need to mask G1_scratch for tosBits after the above shift
690 ConstantPoolCacheEntry::verify_tosBits();
691 __ cmp(G1_scratch, atos );
692 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
693 __ delayed()->ld_ptr(Otos_i, G3_scratch, Otos_i);
694 __ cmp(G1_scratch, itos);
695 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
696 __ delayed()->ld(Otos_i, G3_scratch, Otos_i);
697 __ cmp(G1_scratch, stos);
698 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
699 __ delayed()->ldsh(Otos_i, G3_scratch, Otos_i);
700 __ cmp(G1_scratch, ctos);
701 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
702 __ delayed()->lduh(Otos_i, G3_scratch, Otos_i);
703 #ifdef ASSERT
704 __ cmp(G1_scratch, btos);
705 __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
706 __ delayed()->ldsb(Otos_i, G3_scratch, Otos_i);
707 __ should_not_reach_here();
708 #endif
709 __ ldsb(Otos_i, G3_scratch, Otos_i);
710 __ bind(xreturn_path);
712 // _ireturn/_areturn
713 __ retl(); // return from leaf routine
714 __ delayed()->mov(O5_savedSP, SP);
716 // Generate regular method entry
717 __ bind(slow_path);
718 (void) generate_normal_entry(false);
719 return entry;
720 }
721 return NULL;
722 }
724 // Method entry for java.lang.ref.Reference.get.
725 address InterpreterGenerator::generate_Reference_get_entry(void) {
726 #ifndef SERIALGC
727 // Code: _aload_0, _getfield, _areturn
728 // parameter size = 1
729 //
730 // The code that gets generated by this routine is split into 2 parts:
731 // 1. The "intrinsified" code for G1 (or any SATB based GC),
732 // 2. The slow path - which is an expansion of the regular method entry.
733 //
734 // Notes:-
735 // * In the G1 code we do not check whether we need to block for
736 // a safepoint. If G1 is enabled then we must execute the specialized
737 // code for Reference.get (except when the Reference object is null)
738 // so that we can log the value in the referent field with an SATB
739 // update buffer.
740 // If the code for the getfield template is modified so that the
741 // G1 pre-barrier code is executed when the current method is
742 // Reference.get() then going through the normal method entry
743 // will be fine.
744 // * The G1 code can, however, check the receiver object (the instance
745 // of java.lang.Reference) and jump to the slow path if null. If the
746 // Reference object is null then we obviously cannot fetch the referent
747 // and so we don't need to call the G1 pre-barrier. Thus we can use the
748 // regular method entry code to generate the NPE.
749 //
750 // This code is based on generate_accessor_enty.
752 address entry = __ pc();
754 const int referent_offset = java_lang_ref_Reference::referent_offset;
755 guarantee(referent_offset > 0, "referent offset not initialized");
757 if (UseG1GC) {
758 Label slow_path;
760 // In the G1 code we don't check if we need to reach a safepoint. We
761 // continue and the thread will safepoint at the next bytecode dispatch.
763 // Check if local 0 != NULL
764 // If the receiver is null then it is OK to jump to the slow path.
765 __ ld_ptr(Gargs, G0, Otos_i ); // get local 0
766 // check if local 0 == NULL and go the slow path
767 __ cmp_and_brx_short(Otos_i, 0, Assembler::equal, Assembler::pn, slow_path);
770 // Load the value of the referent field.
771 if (Assembler::is_simm13(referent_offset)) {
772 __ load_heap_oop(Otos_i, referent_offset, Otos_i);
773 } else {
774 __ set(referent_offset, G3_scratch);
775 __ load_heap_oop(Otos_i, G3_scratch, Otos_i);
776 }
778 // Generate the G1 pre-barrier code to log the value of
779 // the referent field in an SATB buffer. Note with
780 // these parameters the pre-barrier does not generate
781 // the load of the previous value
783 __ g1_write_barrier_pre(noreg /* obj */, noreg /* index */, 0 /* offset */,
784 Otos_i /* pre_val */,
785 G3_scratch /* tmp */,
786 true /* preserve_o_regs */);
788 // _areturn
789 __ retl(); // return from leaf routine
790 __ delayed()->mov(O5_savedSP, SP);
792 // Generate regular method entry
793 __ bind(slow_path);
794 (void) generate_normal_entry(false);
795 return entry;
796 }
797 #endif // SERIALGC
799 // If G1 is not enabled then attempt to go through the accessor entry point
800 // Reference.get is an accessor
801 return generate_accessor_entry();
802 }
804 //
805 // Interpreter stub for calling a native method. (asm interpreter)
806 // This sets up a somewhat different looking stack for calling the native method
807 // than the typical interpreter frame setup.
808 //
810 address InterpreterGenerator::generate_native_entry(bool synchronized) {
811 address entry = __ pc();
813 // the following temporary registers are used during frame creation
814 const Register Gtmp1 = G3_scratch ;
815 const Register Gtmp2 = G1_scratch;
816 bool inc_counter = UseCompiler || CountCompiledCalls;
818 // make sure registers are different!
819 assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
821 const Address Laccess_flags(Lmethod, methodOopDesc::access_flags_offset());
823 __ verify_oop(G5_method);
825 const Register Glocals_size = G3;
826 assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
828 // make sure method is native & not abstract
829 // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
830 #ifdef ASSERT
831 __ ld(G5_method, methodOopDesc::access_flags_offset(), Gtmp1);
832 {
833 Label L;
834 __ btst(JVM_ACC_NATIVE, Gtmp1);
835 __ br(Assembler::notZero, false, Assembler::pt, L);
836 __ delayed()->nop();
837 __ stop("tried to execute non-native method as native");
838 __ bind(L);
839 }
840 { Label L;
841 __ btst(JVM_ACC_ABSTRACT, Gtmp1);
842 __ br(Assembler::zero, false, Assembler::pt, L);
843 __ delayed()->nop();
844 __ stop("tried to execute abstract method as non-abstract");
845 __ bind(L);
846 }
847 #endif // ASSERT
849 // generate the code to allocate the interpreter stack frame
850 generate_fixed_frame(true);
852 //
853 // No locals to initialize for native method
854 //
856 // this slot will be set later, we initialize it to null here just in
857 // case we get a GC before the actual value is stored later
858 __ st_ptr(G0, FP, (frame::interpreter_frame_oop_temp_offset * wordSize) + STACK_BIAS);
860 const Address do_not_unlock_if_synchronized(G2_thread,
861 JavaThread::do_not_unlock_if_synchronized_offset());
862 // Since at this point in the method invocation the exception handler
863 // would try to exit the monitor of synchronized methods which hasn't
864 // been entered yet, we set the thread local variable
865 // _do_not_unlock_if_synchronized to true. If any exception was thrown by
866 // runtime, exception handling i.e. unlock_if_synchronized_method will
867 // check this thread local flag.
868 // This flag has two effects, one is to force an unwind in the topmost
869 // interpreter frame and not perform an unlock while doing so.
871 __ movbool(true, G3_scratch);
872 __ stbool(G3_scratch, do_not_unlock_if_synchronized);
874 // increment invocation counter and check for overflow
875 //
876 // Note: checking for negative value instead of overflow
877 // so we have a 'sticky' overflow test (may be of
878 // importance as soon as we have true MT/MP)
879 Label invocation_counter_overflow;
880 Label Lcontinue;
881 if (inc_counter) {
882 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
884 }
885 __ bind(Lcontinue);
887 bang_stack_shadow_pages(true);
889 // reset the _do_not_unlock_if_synchronized flag
890 __ stbool(G0, do_not_unlock_if_synchronized);
892 // check for synchronized methods
893 // Must happen AFTER invocation_counter check and stack overflow check,
894 // so method is not locked if overflows.
896 if (synchronized) {
897 lock_method();
898 } else {
899 #ifdef ASSERT
900 { Label ok;
901 __ ld(Laccess_flags, O0);
902 __ btst(JVM_ACC_SYNCHRONIZED, O0);
903 __ br( Assembler::zero, false, Assembler::pt, ok);
904 __ delayed()->nop();
905 __ stop("method needs synchronization");
906 __ bind(ok);
907 }
908 #endif // ASSERT
909 }
912 // start execution
913 __ verify_thread();
915 // JVMTI support
916 __ notify_method_entry();
918 // native call
920 // (note that O0 is never an oop--at most it is a handle)
921 // It is important not to smash any handles created by this call,
922 // until any oop handle in O0 is dereferenced.
924 // (note that the space for outgoing params is preallocated)
926 // get signature handler
927 { Label L;
928 Address signature_handler(Lmethod, methodOopDesc::signature_handler_offset());
929 __ ld_ptr(signature_handler, G3_scratch);
930 __ br_notnull_short(G3_scratch, Assembler::pt, L);
931 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), Lmethod);
932 __ ld_ptr(signature_handler, G3_scratch);
933 __ bind(L);
934 }
936 // Push a new frame so that the args will really be stored in
937 // Copy a few locals across so the new frame has the variables
938 // we need but these values will be dead at the jni call and
939 // therefore not gc volatile like the values in the current
940 // frame (Lmethod in particular)
942 // Flush the method pointer to the register save area
943 __ st_ptr(Lmethod, SP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS);
944 __ mov(Llocals, O1);
946 // calculate where the mirror handle body is allocated in the interpreter frame:
947 __ add(FP, (frame::interpreter_frame_oop_temp_offset * wordSize) + STACK_BIAS, O2);
949 // Calculate current frame size
950 __ sub(SP, FP, O3); // Calculate negative of current frame size
951 __ save(SP, O3, SP); // Allocate an identical sized frame
953 // Note I7 has leftover trash. Slow signature handler will fill it in
954 // should we get there. Normal jni call will set reasonable last_Java_pc
955 // below (and fix I7 so the stack trace doesn't have a meaningless frame
956 // in it).
958 // Load interpreter frame's Lmethod into same register here
960 __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
962 __ mov(I1, Llocals);
963 __ mov(I2, Lscratch2); // save the address of the mirror
966 // ONLY Lmethod and Llocals are valid here!
968 // call signature handler, It will move the arg properly since Llocals in current frame
969 // matches that in outer frame
971 __ callr(G3_scratch, 0);
972 __ delayed()->nop();
974 // Result handler is in Lscratch
976 // Reload interpreter frame's Lmethod since slow signature handler may block
977 __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
979 { Label not_static;
981 __ ld(Laccess_flags, O0);
982 __ btst(JVM_ACC_STATIC, O0);
983 __ br( Assembler::zero, false, Assembler::pt, not_static);
984 // get native function entry point(O0 is a good temp until the very end)
985 __ delayed()->ld_ptr(Lmethod, in_bytes(methodOopDesc::native_function_offset()), O0);
986 // for static methods insert the mirror argument
987 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
989 __ ld_ptr(Lmethod, methodOopDesc:: constants_offset(), O1);
990 __ ld_ptr(O1, constantPoolOopDesc::pool_holder_offset_in_bytes(), O1);
991 __ ld_ptr(O1, mirror_offset, O1);
992 #ifdef ASSERT
993 if (!PrintSignatureHandlers) // do not dirty the output with this
994 { Label L;
995 __ br_notnull_short(O1, Assembler::pt, L);
996 __ stop("mirror is missing");
997 __ bind(L);
998 }
999 #endif // ASSERT
1000 __ st_ptr(O1, Lscratch2, 0);
1001 __ mov(Lscratch2, O1);
1002 __ bind(not_static);
1003 }
1005 // At this point, arguments have been copied off of stack into
1006 // their JNI positions, which are O1..O5 and SP[68..].
1007 // Oops are boxed in-place on the stack, with handles copied to arguments.
1008 // The result handler is in Lscratch. O0 will shortly hold the JNIEnv*.
1010 #ifdef ASSERT
1011 { Label L;
1012 __ br_notnull_short(O0, Assembler::pt, L);
1013 __ stop("native entry point is missing");
1014 __ bind(L);
1015 }
1016 #endif // ASSERT
1018 //
1019 // setup the frame anchor
1020 //
1021 // The scavenge function only needs to know that the PC of this frame is
1022 // in the interpreter method entry code, it doesn't need to know the exact
1023 // PC and hence we can use O7 which points to the return address from the
1024 // previous call in the code stream (signature handler function)
1025 //
1026 // The other trick is we set last_Java_sp to FP instead of the usual SP because
1027 // we have pushed the extra frame in order to protect the volatile register(s)
1028 // in that frame when we return from the jni call
1029 //
1031 __ set_last_Java_frame(FP, O7);
1032 __ mov(O7, I7); // make dummy interpreter frame look like one above,
1033 // not meaningless information that'll confuse me.
1035 // flush the windows now. We don't care about the current (protection) frame
1036 // only the outer frames
1038 __ flush_windows();
1040 // mark windows as flushed
1041 Address flags(G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset());
1042 __ set(JavaFrameAnchor::flushed, G3_scratch);
1043 __ st(G3_scratch, flags);
1045 // Transition from _thread_in_Java to _thread_in_native. We are already safepoint ready.
1047 Address thread_state(G2_thread, JavaThread::thread_state_offset());
1048 #ifdef ASSERT
1049 { Label L;
1050 __ ld(thread_state, G3_scratch);
1051 __ cmp_and_br_short(G3_scratch, _thread_in_Java, Assembler::equal, Assembler::pt, L);
1052 __ stop("Wrong thread state in native stub");
1053 __ bind(L);
1054 }
1055 #endif // ASSERT
1056 __ set(_thread_in_native, G3_scratch);
1057 __ st(G3_scratch, thread_state);
1059 // Call the jni method, using the delay slot to set the JNIEnv* argument.
1060 __ save_thread(L7_thread_cache); // save Gthread
1061 __ callr(O0, 0);
1062 __ delayed()->
1063 add(L7_thread_cache, in_bytes(JavaThread::jni_environment_offset()), O0);
1065 // Back from jni method Lmethod in this frame is DEAD, DEAD, DEAD
1067 __ restore_thread(L7_thread_cache); // restore G2_thread
1068 __ reinit_heapbase();
1070 // must we block?
1072 // Block, if necessary, before resuming in _thread_in_Java state.
1073 // In order for GC to work, don't clear the last_Java_sp until after blocking.
1074 { Label no_block;
1075 AddressLiteral sync_state(SafepointSynchronize::address_of_state());
1077 // Switch thread to "native transition" state before reading the synchronization state.
1078 // This additional state is necessary because reading and testing the synchronization
1079 // state is not atomic w.r.t. GC, as this scenario demonstrates:
1080 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
1081 // VM thread changes sync state to synchronizing and suspends threads for GC.
1082 // Thread A is resumed to finish this native method, but doesn't block here since it
1083 // didn't see any synchronization is progress, and escapes.
1084 __ set(_thread_in_native_trans, G3_scratch);
1085 __ st(G3_scratch, thread_state);
1086 if(os::is_MP()) {
1087 if (UseMembar) {
1088 // Force this write out before the read below
1089 __ membar(Assembler::StoreLoad);
1090 } else {
1091 // Write serialization page so VM thread can do a pseudo remote membar.
1092 // We use the current thread pointer to calculate a thread specific
1093 // offset to write to within the page. This minimizes bus traffic
1094 // due to cache line collision.
1095 __ serialize_memory(G2_thread, G1_scratch, G3_scratch);
1096 }
1097 }
1098 __ load_contents(sync_state, G3_scratch);
1099 __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
1101 Label L;
1102 __ br(Assembler::notEqual, false, Assembler::pn, L);
1103 __ delayed()->ld(G2_thread, JavaThread::suspend_flags_offset(), G3_scratch);
1104 __ cmp_and_br_short(G3_scratch, 0, Assembler::equal, Assembler::pt, no_block);
1105 __ bind(L);
1107 // Block. Save any potential method result value before the operation and
1108 // use a leaf call to leave the last_Java_frame setup undisturbed.
1109 save_native_result();
1110 __ call_VM_leaf(L7_thread_cache,
1111 CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans),
1112 G2_thread);
1114 // Restore any method result value
1115 restore_native_result();
1116 __ bind(no_block);
1117 }
1119 // Clear the frame anchor now
1121 __ reset_last_Java_frame();
1123 // Move the result handler address
1124 __ mov(Lscratch, G3_scratch);
1125 // return possible result to the outer frame
1126 #ifndef __LP64
1127 __ mov(O0, I0);
1128 __ restore(O1, G0, O1);
1129 #else
1130 __ restore(O0, G0, O0);
1131 #endif /* __LP64 */
1133 // Move result handler to expected register
1134 __ mov(G3_scratch, Lscratch);
1136 // Back in normal (native) interpreter frame. State is thread_in_native_trans
1137 // switch to thread_in_Java.
1139 __ set(_thread_in_Java, G3_scratch);
1140 __ st(G3_scratch, thread_state);
1142 // reset handle block
1143 __ ld_ptr(G2_thread, JavaThread::active_handles_offset(), G3_scratch);
1144 __ st_ptr(G0, G3_scratch, JNIHandleBlock::top_offset_in_bytes());
1146 // If we have an oop result store it where it will be safe for any further gc
1147 // until we return now that we've released the handle it might be protected by
1149 {
1150 Label no_oop, store_result;
1152 __ set((intptr_t)AbstractInterpreter::result_handler(T_OBJECT), G3_scratch);
1153 __ cmp_and_brx_short(G3_scratch, Lscratch, Assembler::notEqual, Assembler::pt, no_oop);
1154 __ addcc(G0, O0, O0);
1155 __ brx(Assembler::notZero, true, Assembler::pt, store_result); // if result is not NULL:
1156 __ delayed()->ld_ptr(O0, 0, O0); // unbox it
1157 __ mov(G0, O0);
1159 __ bind(store_result);
1160 // Store it where gc will look for it and result handler expects it.
1161 __ st_ptr(O0, FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS);
1163 __ bind(no_oop);
1165 }
1168 // handle exceptions (exception handling will handle unlocking!)
1169 { Label L;
1170 Address exception_addr(G2_thread, Thread::pending_exception_offset());
1171 __ ld_ptr(exception_addr, Gtemp);
1172 __ br_null_short(Gtemp, Assembler::pt, L);
1173 // Note: This could be handled more efficiently since we know that the native
1174 // method doesn't have an exception handler. We could directly return
1175 // to the exception handler for the caller.
1176 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
1177 __ should_not_reach_here();
1178 __ bind(L);
1179 }
1181 // JVMTI support (preserves thread register)
1182 __ notify_method_exit(true, ilgl, InterpreterMacroAssembler::NotifyJVMTI);
1184 if (synchronized) {
1185 // save and restore any potential method result value around the unlocking operation
1186 save_native_result();
1188 __ add( __ top_most_monitor(), O1);
1189 __ unlock_object(O1);
1191 restore_native_result();
1192 }
1194 #if defined(COMPILER2) && !defined(_LP64)
1196 // C2 expects long results in G1 we can't tell if we're returning to interpreted
1197 // or compiled so just be safe.
1199 __ sllx(O0, 32, G1); // Shift bits into high G1
1200 __ srl (O1, 0, O1); // Zero extend O1
1201 __ or3 (O1, G1, G1); // OR 64 bits into G1
1203 #endif /* COMPILER2 && !_LP64 */
1205 // dispose of return address and remove activation
1206 #ifdef ASSERT
1207 {
1208 Label ok;
1209 __ cmp_and_brx_short(I5_savedSP, FP, Assembler::greaterEqualUnsigned, Assembler::pt, ok);
1210 __ stop("bad I5_savedSP value");
1211 __ should_not_reach_here();
1212 __ bind(ok);
1213 }
1214 #endif
1215 if (TraceJumps) {
1216 // Move target to register that is recordable
1217 __ mov(Lscratch, G3_scratch);
1218 __ JMP(G3_scratch, 0);
1219 } else {
1220 __ jmp(Lscratch, 0);
1221 }
1222 __ delayed()->nop();
1225 if (inc_counter) {
1226 // handle invocation counter overflow
1227 __ bind(invocation_counter_overflow);
1228 generate_counter_overflow(Lcontinue);
1229 }
1233 return entry;
1234 }
1237 // Generic method entry to (asm) interpreter
1238 //------------------------------------------------------------------------------------------------------------------------
1239 //
1240 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1241 address entry = __ pc();
1243 bool inc_counter = UseCompiler || CountCompiledCalls;
1245 // the following temporary registers are used during frame creation
1246 const Register Gtmp1 = G3_scratch ;
1247 const Register Gtmp2 = G1_scratch;
1249 // make sure registers are different!
1250 assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
1252 const Address size_of_parameters(G5_method, methodOopDesc::size_of_parameters_offset());
1253 const Address size_of_locals (G5_method, methodOopDesc::size_of_locals_offset());
1254 // Seems like G5_method is live at the point this is used. So we could make this look consistent
1255 // and use in the asserts.
1256 const Address access_flags (Lmethod, methodOopDesc::access_flags_offset());
1258 __ verify_oop(G5_method);
1260 const Register Glocals_size = G3;
1261 assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
1263 // make sure method is not native & not abstract
1264 // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
1265 #ifdef ASSERT
1266 __ ld(G5_method, methodOopDesc::access_flags_offset(), Gtmp1);
1267 {
1268 Label L;
1269 __ btst(JVM_ACC_NATIVE, Gtmp1);
1270 __ br(Assembler::zero, false, Assembler::pt, L);
1271 __ delayed()->nop();
1272 __ stop("tried to execute native method as non-native");
1273 __ bind(L);
1274 }
1275 { Label L;
1276 __ btst(JVM_ACC_ABSTRACT, Gtmp1);
1277 __ br(Assembler::zero, false, Assembler::pt, L);
1278 __ delayed()->nop();
1279 __ stop("tried to execute abstract method as non-abstract");
1280 __ bind(L);
1281 }
1282 #endif // ASSERT
1284 // generate the code to allocate the interpreter stack frame
1286 generate_fixed_frame(false);
1288 #ifdef FAST_DISPATCH
1289 __ set((intptr_t)Interpreter::dispatch_table(), IdispatchTables);
1290 // set bytecode dispatch table base
1291 #endif
1293 //
1294 // Code to initialize the extra (i.e. non-parm) locals
1295 //
1296 Register init_value = noreg; // will be G0 if we must clear locals
1297 // The way the code was setup before zerolocals was always true for vanilla java entries.
1298 // It could only be false for the specialized entries like accessor or empty which have
1299 // no extra locals so the testing was a waste of time and the extra locals were always
1300 // initialized. We removed this extra complication to already over complicated code.
1302 init_value = G0;
1303 Label clear_loop;
1305 // NOTE: If you change the frame layout, this code will need to
1306 // be updated!
1307 __ lduh( size_of_locals, O2 );
1308 __ lduh( size_of_parameters, O1 );
1309 __ sll( O2, Interpreter::logStackElementSize, O2);
1310 __ sll( O1, Interpreter::logStackElementSize, O1 );
1311 __ sub( Llocals, O2, O2 );
1312 __ sub( Llocals, O1, O1 );
1314 __ bind( clear_loop );
1315 __ inc( O2, wordSize );
1317 __ cmp( O2, O1 );
1318 __ brx( Assembler::lessEqualUnsigned, true, Assembler::pt, clear_loop );
1319 __ delayed()->st_ptr( init_value, O2, 0 );
1321 const Address do_not_unlock_if_synchronized(G2_thread,
1322 JavaThread::do_not_unlock_if_synchronized_offset());
1323 // Since at this point in the method invocation the exception handler
1324 // would try to exit the monitor of synchronized methods which hasn't
1325 // been entered yet, we set the thread local variable
1326 // _do_not_unlock_if_synchronized to true. If any exception was thrown by
1327 // runtime, exception handling i.e. unlock_if_synchronized_method will
1328 // check this thread local flag.
1329 __ movbool(true, G3_scratch);
1330 __ stbool(G3_scratch, do_not_unlock_if_synchronized);
1332 // increment invocation counter and check for overflow
1333 //
1334 // Note: checking for negative value instead of overflow
1335 // so we have a 'sticky' overflow test (may be of
1336 // importance as soon as we have true MT/MP)
1337 Label invocation_counter_overflow;
1338 Label profile_method;
1339 Label profile_method_continue;
1340 Label Lcontinue;
1341 if (inc_counter) {
1342 generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue);
1343 if (ProfileInterpreter) {
1344 __ bind(profile_method_continue);
1345 }
1346 }
1347 __ bind(Lcontinue);
1349 bang_stack_shadow_pages(false);
1351 // reset the _do_not_unlock_if_synchronized flag
1352 __ stbool(G0, do_not_unlock_if_synchronized);
1354 // check for synchronized methods
1355 // Must happen AFTER invocation_counter check and stack overflow check,
1356 // so method is not locked if overflows.
1358 if (synchronized) {
1359 lock_method();
1360 } else {
1361 #ifdef ASSERT
1362 { Label ok;
1363 __ ld(access_flags, O0);
1364 __ btst(JVM_ACC_SYNCHRONIZED, O0);
1365 __ br( Assembler::zero, false, Assembler::pt, ok);
1366 __ delayed()->nop();
1367 __ stop("method needs synchronization");
1368 __ bind(ok);
1369 }
1370 #endif // ASSERT
1371 }
1373 // start execution
1375 __ verify_thread();
1377 // jvmti support
1378 __ notify_method_entry();
1380 // start executing instructions
1381 __ dispatch_next(vtos);
1384 if (inc_counter) {
1385 if (ProfileInterpreter) {
1386 // We have decided to profile this method in the interpreter
1387 __ bind(profile_method);
1389 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method));
1390 __ set_method_data_pointer_for_bcp();
1391 __ ba_short(profile_method_continue);
1392 }
1394 // handle invocation counter overflow
1395 __ bind(invocation_counter_overflow);
1396 generate_counter_overflow(Lcontinue);
1397 }
1400 return entry;
1401 }
1404 //----------------------------------------------------------------------------------------------------
1405 // Entry points & stack frame layout
1406 //
1407 // Here we generate the various kind of entries into the interpreter.
1408 // The two main entry type are generic bytecode methods and native call method.
1409 // These both come in synchronized and non-synchronized versions but the
1410 // frame layout they create is very similar. The other method entry
1411 // types are really just special purpose entries that are really entry
1412 // and interpretation all in one. These are for trivial methods like
1413 // accessor, empty, or special math methods.
1414 //
1415 // When control flow reaches any of the entry types for the interpreter
1416 // the following holds ->
1417 //
1418 // C2 Calling Conventions:
1419 //
1420 // The entry code below assumes that the following registers are set
1421 // when coming in:
1422 // G5_method: holds the methodOop of the method to call
1423 // Lesp: points to the TOS of the callers expression stack
1424 // after having pushed all the parameters
1425 //
1426 // The entry code does the following to setup an interpreter frame
1427 // pop parameters from the callers stack by adjusting Lesp
1428 // set O0 to Lesp
1429 // compute X = (max_locals - num_parameters)
1430 // bump SP up by X to accomadate the extra locals
1431 // compute X = max_expression_stack
1432 // + vm_local_words
1433 // + 16 words of register save area
1434 // save frame doing a save sp, -X, sp growing towards lower addresses
1435 // set Lbcp, Lmethod, LcpoolCache
1436 // set Llocals to i0
1437 // set Lmonitors to FP - rounded_vm_local_words
1438 // set Lesp to Lmonitors - 4
1439 //
1440 // The frame has now been setup to do the rest of the entry code
1442 // Try this optimization: Most method entries could live in a
1443 // "one size fits all" stack frame without all the dynamic size
1444 // calculations. It might be profitable to do all this calculation
1445 // statically and approximately for "small enough" methods.
1447 //-----------------------------------------------------------------------------------------------
1449 // C1 Calling conventions
1450 //
1451 // Upon method entry, the following registers are setup:
1452 //
1453 // g2 G2_thread: current thread
1454 // g5 G5_method: method to activate
1455 // g4 Gargs : pointer to last argument
1456 //
1457 //
1458 // Stack:
1459 //
1460 // +---------------+ <--- sp
1461 // | |
1462 // : reg save area :
1463 // | |
1464 // +---------------+ <--- sp + 0x40
1465 // | |
1466 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1467 // | |
1468 // +---------------+ <--- sp + 0x5c
1469 // | |
1470 // : free :
1471 // | |
1472 // +---------------+ <--- Gargs
1473 // | |
1474 // : arguments :
1475 // | |
1476 // +---------------+
1477 // | |
1478 //
1479 //
1480 //
1481 // AFTER FRAME HAS BEEN SETUP for method interpretation the stack looks like:
1482 //
1483 // +---------------+ <--- sp
1484 // | |
1485 // : reg save area :
1486 // | |
1487 // +---------------+ <--- sp + 0x40
1488 // | |
1489 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1490 // | |
1491 // +---------------+ <--- sp + 0x5c
1492 // | |
1493 // : :
1494 // | | <--- Lesp
1495 // +---------------+ <--- Lmonitors (fp - 0x18)
1496 // | VM locals |
1497 // +---------------+ <--- fp
1498 // | |
1499 // : reg save area :
1500 // | |
1501 // +---------------+ <--- fp + 0x40
1502 // | |
1503 // : extra 7 slots : note: these slots are not really needed for the interpreter (fix later)
1504 // | |
1505 // +---------------+ <--- fp + 0x5c
1506 // | |
1507 // : free :
1508 // | |
1509 // +---------------+
1510 // | |
1511 // : nonarg locals :
1512 // | |
1513 // +---------------+
1514 // | |
1515 // : arguments :
1516 // | | <--- Llocals
1517 // +---------------+ <--- Gargs
1518 // | |
1520 static int size_activation_helper(int callee_extra_locals, int max_stack, int monitor_size) {
1522 // Figure out the size of an interpreter frame (in words) given that we have a fully allocated
1523 // expression stack, the callee will have callee_extra_locals (so we can account for
1524 // frame extension) and monitor_size for monitors. Basically we need to calculate
1525 // this exactly like generate_fixed_frame/generate_compute_interpreter_state.
1526 //
1527 //
1528 // The big complicating thing here is that we must ensure that the stack stays properly
1529 // aligned. This would be even uglier if monitor size wasn't modulo what the stack
1530 // needs to be aligned for). We are given that the sp (fp) is already aligned by
1531 // the caller so we must ensure that it is properly aligned for our callee.
1532 //
1533 const int rounded_vm_local_words =
1534 round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
1535 // callee_locals and max_stack are counts, not the size in frame.
1536 const int locals_size =
1537 round_to(callee_extra_locals * Interpreter::stackElementWords, WordsPerLong);
1538 const int max_stack_words = max_stack * Interpreter::stackElementWords;
1539 return (round_to((max_stack_words
1540 //6815692//+ methodOopDesc::extra_stack_words()
1541 + rounded_vm_local_words
1542 + frame::memory_parameter_word_sp_offset), WordsPerLong)
1543 // already rounded
1544 + locals_size + monitor_size);
1545 }
1547 // How much stack a method top interpreter activation needs in words.
1548 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1550 // See call_stub code
1551 int call_stub_size = round_to(7 + frame::memory_parameter_word_sp_offset,
1552 WordsPerLong); // 7 + register save area
1554 // Save space for one monitor to get into the interpreted method in case
1555 // the method is synchronized
1556 int monitor_size = method->is_synchronized() ?
1557 1*frame::interpreter_frame_monitor_size() : 0;
1558 return size_activation_helper(method->max_locals(), method->max_stack(),
1559 monitor_size) + call_stub_size;
1560 }
1562 int AbstractInterpreter::layout_activation(methodOop method,
1563 int tempcount,
1564 int popframe_extra_args,
1565 int moncount,
1566 int caller_actual_parameters,
1567 int callee_param_count,
1568 int callee_local_count,
1569 frame* caller,
1570 frame* interpreter_frame,
1571 bool is_top_frame) {
1572 // Note: This calculation must exactly parallel the frame setup
1573 // in InterpreterGenerator::generate_fixed_frame.
1574 // If f!=NULL, set up the following variables:
1575 // - Lmethod
1576 // - Llocals
1577 // - Lmonitors (to the indicated number of monitors)
1578 // - Lesp (to the indicated number of temps)
1579 // The frame f (if not NULL) on entry is a description of the caller of the frame
1580 // we are about to layout. We are guaranteed that we will be able to fill in a
1581 // new interpreter frame as its callee (i.e. the stack space is allocated and
1582 // the amount was determined by an earlier call to this method with f == NULL).
1583 // On return f (if not NULL) while describe the interpreter frame we just layed out.
1585 int monitor_size = moncount * frame::interpreter_frame_monitor_size();
1586 int rounded_vm_local_words = round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
1588 assert(monitor_size == round_to(monitor_size, WordsPerLong), "must align");
1589 //
1590 // Note: if you look closely this appears to be doing something much different
1591 // than generate_fixed_frame. What is happening is this. On sparc we have to do
1592 // this dance with interpreter_sp_adjustment because the window save area would
1593 // appear just below the bottom (tos) of the caller's java expression stack. Because
1594 // the interpreter want to have the locals completely contiguous generate_fixed_frame
1595 // will adjust the caller's sp for the "extra locals" (max_locals - parameter_size).
1596 // Now in generate_fixed_frame the extension of the caller's sp happens in the callee.
1597 // In this code the opposite occurs the caller adjusts it's own stack base on the callee.
1598 // This is mostly ok but it does cause a problem when we get to the initial frame (the oldest)
1599 // because the oldest frame would have adjust its callers frame and yet that frame
1600 // already exists and isn't part of this array of frames we are unpacking. So at first
1601 // glance this would seem to mess up that frame. However Deoptimization::fetch_unroll_info_helper()
1602 // will after it calculates all of the frame's on_stack_size()'s will then figure out the
1603 // amount to adjust the caller of the initial (oldest) frame and the calculation will all
1604 // add up. It does seem like it simpler to account for the adjustment here (and remove the
1605 // callee... parameters here). However this would mean that this routine would have to take
1606 // the caller frame as input so we could adjust its sp (and set it's interpreter_sp_adjustment)
1607 // and run the calling loop in the reverse order. This would also would appear to mean making
1608 // this code aware of what the interactions are when that initial caller fram was an osr or
1609 // other adapter frame. deoptimization is complicated enough and hard enough to debug that
1610 // there is no sense in messing working code.
1611 //
1613 int rounded_cls = round_to((callee_local_count - callee_param_count), WordsPerLong);
1614 assert(rounded_cls == round_to(rounded_cls, WordsPerLong), "must align");
1616 int raw_frame_size = size_activation_helper(rounded_cls, method->max_stack(),
1617 monitor_size);
1619 if (interpreter_frame != NULL) {
1620 // The skeleton frame must already look like an interpreter frame
1621 // even if not fully filled out.
1622 assert(interpreter_frame->is_interpreted_frame(), "Must be interpreted frame");
1624 intptr_t* fp = interpreter_frame->fp();
1626 JavaThread* thread = JavaThread::current();
1627 RegisterMap map(thread, false);
1628 // More verification that skeleton frame is properly walkable
1629 assert(fp == caller->sp(), "fp must match");
1631 intptr_t* montop = fp - rounded_vm_local_words;
1633 // preallocate monitors (cf. __ add_monitor_to_stack)
1634 intptr_t* monitors = montop - monitor_size;
1636 // preallocate stack space
1637 intptr_t* esp = monitors - 1 -
1638 (tempcount * Interpreter::stackElementWords) -
1639 popframe_extra_args;
1641 int local_words = method->max_locals() * Interpreter::stackElementWords;
1642 NEEDS_CLEANUP;
1643 intptr_t* locals;
1644 if (caller->is_interpreted_frame()) {
1645 // Can force the locals area to end up properly overlapping the top of the expression stack.
1646 intptr_t* Lesp_ptr = caller->interpreter_frame_tos_address() - 1;
1647 // Note that this computation means we replace size_of_parameters() values from the caller
1648 // interpreter frame's expression stack with our argument locals
1649 int parm_words = caller_actual_parameters * Interpreter::stackElementWords;
1650 locals = Lesp_ptr + parm_words;
1651 int delta = local_words - parm_words;
1652 int computed_sp_adjustment = (delta > 0) ? round_to(delta, WordsPerLong) : 0;
1653 *interpreter_frame->register_addr(I5_savedSP) = (intptr_t) (fp + computed_sp_adjustment) - STACK_BIAS;
1654 } else {
1655 assert(caller->is_compiled_frame() || caller->is_entry_frame() || caller->is_ricochet_frame(), "only possible cases");
1656 // Don't have Lesp available; lay out locals block in the caller
1657 // adjacent to the register window save area.
1658 //
1659 // Compiled frames do not allocate a varargs area which is why this if
1660 // statement is needed.
1661 //
1662 if (caller->is_compiled_frame()) {
1663 locals = fp + frame::register_save_words + local_words - 1;
1664 } else {
1665 locals = fp + frame::memory_parameter_word_sp_offset + local_words - 1;
1666 }
1667 if (!caller->is_entry_frame()) {
1668 // Caller wants his own SP back
1669 int caller_frame_size = caller->cb()->frame_size();
1670 *interpreter_frame->register_addr(I5_savedSP) = (intptr_t)(caller->fp() - caller_frame_size) - STACK_BIAS;
1671 }
1672 }
1673 if (TraceDeoptimization) {
1674 if (caller->is_entry_frame()) {
1675 // make sure I5_savedSP and the entry frames notion of saved SP
1676 // agree. This assertion duplicate a check in entry frame code
1677 // but catches the failure earlier.
1678 assert(*caller->register_addr(Lscratch) == *interpreter_frame->register_addr(I5_savedSP),
1679 "would change callers SP");
1680 }
1681 if (caller->is_entry_frame()) {
1682 tty->print("entry ");
1683 }
1684 if (caller->is_compiled_frame()) {
1685 tty->print("compiled ");
1686 if (caller->is_deoptimized_frame()) {
1687 tty->print("(deopt) ");
1688 }
1689 }
1690 if (caller->is_interpreted_frame()) {
1691 tty->print("interpreted ");
1692 }
1693 tty->print_cr("caller fp=0x%x sp=0x%x", caller->fp(), caller->sp());
1694 tty->print_cr("save area = 0x%x, 0x%x", caller->sp(), caller->sp() + 16);
1695 tty->print_cr("save area = 0x%x, 0x%x", caller->fp(), caller->fp() + 16);
1696 tty->print_cr("interpreter fp=0x%x sp=0x%x", interpreter_frame->fp(), interpreter_frame->sp());
1697 tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->sp(), interpreter_frame->sp() + 16);
1698 tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->fp(), interpreter_frame->fp() + 16);
1699 tty->print_cr("Llocals = 0x%x", locals);
1700 tty->print_cr("Lesp = 0x%x", esp);
1701 tty->print_cr("Lmonitors = 0x%x", monitors);
1702 }
1704 if (method->max_locals() > 0) {
1705 assert(locals < caller->sp() || locals >= (caller->sp() + 16), "locals in save area");
1706 assert(locals < caller->fp() || locals > (caller->fp() + 16), "locals in save area");
1707 assert(locals < interpreter_frame->sp() || locals > (interpreter_frame->sp() + 16), "locals in save area");
1708 assert(locals < interpreter_frame->fp() || locals >= (interpreter_frame->fp() + 16), "locals in save area");
1709 }
1710 #ifdef _LP64
1711 assert(*interpreter_frame->register_addr(I5_savedSP) & 1, "must be odd");
1712 #endif
1714 *interpreter_frame->register_addr(Lmethod) = (intptr_t) method;
1715 *interpreter_frame->register_addr(Llocals) = (intptr_t) locals;
1716 *interpreter_frame->register_addr(Lmonitors) = (intptr_t) monitors;
1717 *interpreter_frame->register_addr(Lesp) = (intptr_t) esp;
1718 // Llast_SP will be same as SP as there is no adapter space
1719 *interpreter_frame->register_addr(Llast_SP) = (intptr_t) interpreter_frame->sp() - STACK_BIAS;
1720 *interpreter_frame->register_addr(LcpoolCache) = (intptr_t) method->constants()->cache();
1721 #ifdef FAST_DISPATCH
1722 *interpreter_frame->register_addr(IdispatchTables) = (intptr_t) Interpreter::dispatch_table();
1723 #endif
1726 #ifdef ASSERT
1727 BasicObjectLock* mp = (BasicObjectLock*)monitors;
1729 assert(interpreter_frame->interpreter_frame_method() == method, "method matches");
1730 assert(interpreter_frame->interpreter_frame_local_at(9) == (intptr_t *)((intptr_t)locals - (9 * Interpreter::stackElementSize)), "locals match");
1731 assert(interpreter_frame->interpreter_frame_monitor_end() == mp, "monitor_end matches");
1732 assert(((intptr_t *)interpreter_frame->interpreter_frame_monitor_begin()) == ((intptr_t *)mp)+monitor_size, "monitor_begin matches");
1733 assert(interpreter_frame->interpreter_frame_tos_address()-1 == esp, "esp matches");
1735 // check bounds
1736 intptr_t* lo = interpreter_frame->sp() + (frame::memory_parameter_word_sp_offset - 1);
1737 intptr_t* hi = interpreter_frame->fp() - rounded_vm_local_words;
1738 assert(lo < monitors && montop <= hi, "monitors in bounds");
1739 assert(lo <= esp && esp < monitors, "esp in bounds");
1740 #endif // ASSERT
1741 }
1743 return raw_frame_size;
1744 }
1746 //----------------------------------------------------------------------------------------------------
1747 // Exceptions
1748 void TemplateInterpreterGenerator::generate_throw_exception() {
1750 // Entry point in previous activation (i.e., if the caller was interpreted)
1751 Interpreter::_rethrow_exception_entry = __ pc();
1752 // O0: exception
1754 // entry point for exceptions thrown within interpreter code
1755 Interpreter::_throw_exception_entry = __ pc();
1756 __ verify_thread();
1757 // expression stack is undefined here
1758 // O0: exception, i.e. Oexception
1759 // Lbcp: exception bcx
1760 __ verify_oop(Oexception);
1763 // expression stack must be empty before entering the VM in case of an exception
1764 __ empty_expression_stack();
1765 // find exception handler address and preserve exception oop
1766 // call C routine to find handler and jump to it
1767 __ call_VM(O1, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), Oexception);
1768 __ push_ptr(O1); // push exception for exception handler bytecodes
1770 __ JMP(O0, 0); // jump to exception handler (may be remove activation entry!)
1771 __ delayed()->nop();
1774 // if the exception is not handled in the current frame
1775 // the frame is removed and the exception is rethrown
1776 // (i.e. exception continuation is _rethrow_exception)
1777 //
1778 // Note: At this point the bci is still the bxi for the instruction which caused
1779 // the exception and the expression stack is empty. Thus, for any VM calls
1780 // at this point, GC will find a legal oop map (with empty expression stack).
1782 // in current activation
1783 // tos: exception
1784 // Lbcp: exception bcp
1786 //
1787 // JVMTI PopFrame support
1788 //
1790 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1791 Address popframe_condition_addr(G2_thread, JavaThread::popframe_condition_offset());
1792 // Set the popframe_processing bit in popframe_condition indicating that we are
1793 // currently handling popframe, so that call_VMs that may happen later do not trigger new
1794 // popframe handling cycles.
1796 __ ld(popframe_condition_addr, G3_scratch);
1797 __ or3(G3_scratch, JavaThread::popframe_processing_bit, G3_scratch);
1798 __ stw(G3_scratch, popframe_condition_addr);
1800 // Empty the expression stack, as in normal exception handling
1801 __ empty_expression_stack();
1802 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, /* install_monitor_exception */ false);
1804 {
1805 // Check to see whether we are returning to a deoptimized frame.
1806 // (The PopFrame call ensures that the caller of the popped frame is
1807 // either interpreted or compiled and deoptimizes it if compiled.)
1808 // In this case, we can't call dispatch_next() after the frame is
1809 // popped, but instead must save the incoming arguments and restore
1810 // them after deoptimization has occurred.
1811 //
1812 // Note that we don't compare the return PC against the
1813 // deoptimization blob's unpack entry because of the presence of
1814 // adapter frames in C2.
1815 Label caller_not_deoptimized;
1816 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), I7);
1817 __ br_notnull_short(O0, Assembler::pt, caller_not_deoptimized);
1819 const Register Gtmp1 = G3_scratch;
1820 const Register Gtmp2 = G1_scratch;
1822 // Compute size of arguments for saving when returning to deoptimized caller
1823 __ lduh(Lmethod, in_bytes(methodOopDesc::size_of_parameters_offset()), Gtmp1);
1824 __ sll(Gtmp1, Interpreter::logStackElementSize, Gtmp1);
1825 __ sub(Llocals, Gtmp1, Gtmp2);
1826 __ add(Gtmp2, wordSize, Gtmp2);
1827 // Save these arguments
1828 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), G2_thread, Gtmp1, Gtmp2);
1829 // Inform deoptimization that it is responsible for restoring these arguments
1830 __ set(JavaThread::popframe_force_deopt_reexecution_bit, Gtmp1);
1831 Address popframe_condition_addr(G2_thread, JavaThread::popframe_condition_offset());
1832 __ st(Gtmp1, popframe_condition_addr);
1834 // Return from the current method
1835 // The caller's SP was adjusted upon method entry to accomodate
1836 // the callee's non-argument locals. Undo that adjustment.
1837 __ ret();
1838 __ delayed()->restore(I5_savedSP, G0, SP);
1840 __ bind(caller_not_deoptimized);
1841 }
1843 // Clear the popframe condition flag
1844 __ stw(G0 /* popframe_inactive */, popframe_condition_addr);
1846 // Get out of the current method (how this is done depends on the particular compiler calling
1847 // convention that the interpreter currently follows)
1848 // The caller's SP was adjusted upon method entry to accomodate
1849 // the callee's non-argument locals. Undo that adjustment.
1850 __ restore(I5_savedSP, G0, SP);
1851 // The method data pointer was incremented already during
1852 // call profiling. We have to restore the mdp for the current bcp.
1853 if (ProfileInterpreter) {
1854 __ set_method_data_pointer_for_bcp();
1855 }
1856 // Resume bytecode interpretation at the current bcp
1857 __ dispatch_next(vtos);
1858 // end of JVMTI PopFrame support
1860 Interpreter::_remove_activation_entry = __ pc();
1862 // preserve exception over this code sequence (remove activation calls the vm, but oopmaps are not correct here)
1863 __ pop_ptr(Oexception); // get exception
1865 // Intel has the following comment:
1866 //// remove the activation (without doing throws on illegalMonitorExceptions)
1867 // They remove the activation without checking for bad monitor state.
1868 // %%% We should make sure this is the right semantics before implementing.
1870 // %%% changed set_vm_result_2 to set_vm_result and get_vm_result_2 to get_vm_result. Is there a bug here?
1871 __ set_vm_result(Oexception);
1872 __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false);
1874 __ notify_method_exit(false, vtos, InterpreterMacroAssembler::SkipNotifyJVMTI);
1876 __ get_vm_result(Oexception);
1877 __ verify_oop(Oexception);
1879 const int return_reg_adjustment = frame::pc_return_offset;
1880 Address issuing_pc_addr(I7, return_reg_adjustment);
1882 // We are done with this activation frame; find out where to go next.
1883 // The continuation point will be an exception handler, which expects
1884 // the following registers set up:
1885 //
1886 // Oexception: exception
1887 // Oissuing_pc: the local call that threw exception
1888 // Other On: garbage
1889 // In/Ln: the contents of the caller's register window
1890 //
1891 // We do the required restore at the last possible moment, because we
1892 // need to preserve some state across a runtime call.
1893 // (Remember that the caller activation is unknown--it might not be
1894 // interpreted, so things like Lscratch are useless in the caller.)
1896 // Although the Intel version uses call_C, we can use the more
1897 // compact call_VM. (The only real difference on SPARC is a
1898 // harmlessly ignored [re]set_last_Java_frame, compared with
1899 // the Intel code which lacks this.)
1900 __ mov(Oexception, Oexception ->after_save()); // get exception in I0 so it will be on O0 after restore
1901 __ add(issuing_pc_addr, Oissuing_pc->after_save()); // likewise set I1 to a value local to the caller
1902 __ super_call_VM_leaf(L7_thread_cache,
1903 CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address),
1904 G2_thread, Oissuing_pc->after_save());
1906 // The caller's SP was adjusted upon method entry to accomodate
1907 // the callee's non-argument locals. Undo that adjustment.
1908 __ JMP(O0, 0); // return exception handler in caller
1909 __ delayed()->restore(I5_savedSP, G0, SP);
1911 // (same old exception object is already in Oexception; see above)
1912 // Note that an "issuing PC" is actually the next PC after the call
1913 }
1916 //
1917 // JVMTI ForceEarlyReturn support
1918 //
1920 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1921 address entry = __ pc();
1923 __ empty_expression_stack();
1924 __ load_earlyret_value(state);
1926 __ ld_ptr(G2_thread, JavaThread::jvmti_thread_state_offset(), G3_scratch);
1927 Address cond_addr(G3_scratch, JvmtiThreadState::earlyret_state_offset());
1929 // Clear the earlyret state
1930 __ stw(G0 /* JvmtiThreadState::earlyret_inactive */, cond_addr);
1932 __ remove_activation(state,
1933 /* throw_monitor_exception */ false,
1934 /* install_monitor_exception */ false);
1936 // The caller's SP was adjusted upon method entry to accomodate
1937 // the callee's non-argument locals. Undo that adjustment.
1938 __ ret(); // return to caller
1939 __ delayed()->restore(I5_savedSP, G0, SP);
1941 return entry;
1942 } // end of JVMTI ForceEarlyReturn support
1945 //------------------------------------------------------------------------------------------------------------------------
1946 // Helper for vtos entry point generation
1948 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, address& bep, address& cep, address& sep, address& aep, address& iep, address& lep, address& fep, address& dep, address& vep) {
1949 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1950 Label L;
1951 aep = __ pc(); __ push_ptr(); __ ba_short(L);
1952 fep = __ pc(); __ push_f(); __ ba_short(L);
1953 dep = __ pc(); __ push_d(); __ ba_short(L);
1954 lep = __ pc(); __ push_l(); __ ba_short(L);
1955 iep = __ pc(); __ push_i();
1956 bep = cep = sep = iep; // there aren't any
1957 vep = __ pc(); __ bind(L); // fall through
1958 generate_and_dispatch(t);
1959 }
1961 // --------------------------------------------------------------------------------
1964 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1965 : TemplateInterpreterGenerator(code) {
1966 generate_all(); // down here so it can be "virtual"
1967 }
1969 // --------------------------------------------------------------------------------
1971 // Non-product code
1972 #ifndef PRODUCT
1973 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1974 address entry = __ pc();
1976 __ push(state);
1977 __ mov(O7, Lscratch); // protect return address within interpreter
1979 // Pass a 0 (not used in sparc) and the top of stack to the bytecode tracer
1980 __ mov( Otos_l2, G3_scratch );
1981 __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), G0, Otos_l1, G3_scratch);
1982 __ mov(Lscratch, O7); // restore return address
1983 __ pop(state);
1984 __ retl();
1985 __ delayed()->nop();
1987 return entry;
1988 }
1991 // helpers for generate_and_dispatch
1993 void TemplateInterpreterGenerator::count_bytecode() {
1994 __ inc_counter(&BytecodeCounter::_counter_value, G3_scratch, G4_scratch);
1995 }
1998 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1999 __ inc_counter(&BytecodeHistogram::_counters[t->bytecode()], G3_scratch, G4_scratch);
2000 }
2003 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
2004 AddressLiteral index (&BytecodePairHistogram::_index);
2005 AddressLiteral counters((address) &BytecodePairHistogram::_counters);
2007 // get index, shift out old bytecode, bring in new bytecode, and store it
2008 // _index = (_index >> log2_number_of_codes) |
2009 // (bytecode << log2_number_of_codes);
2011 __ load_contents(index, G4_scratch);
2012 __ srl( G4_scratch, BytecodePairHistogram::log2_number_of_codes, G4_scratch );
2013 __ set( ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes, G3_scratch );
2014 __ or3( G3_scratch, G4_scratch, G4_scratch );
2015 __ store_contents(G4_scratch, index, G3_scratch);
2017 // bump bucket contents
2018 // _counters[_index] ++;
2020 __ set(counters, G3_scratch); // loads into G3_scratch
2021 __ sll( G4_scratch, LogBytesPerWord, G4_scratch ); // Index is word address
2022 __ add (G3_scratch, G4_scratch, G3_scratch); // Add in index
2023 __ ld (G3_scratch, 0, G4_scratch);
2024 __ inc (G4_scratch);
2025 __ st (G4_scratch, 0, G3_scratch);
2026 }
2029 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
2030 // Call a little run-time stub to avoid blow-up for each bytecode.
2031 // The run-time runtime saves the right registers, depending on
2032 // the tosca in-state for the given template.
2033 address entry = Interpreter::trace_code(t->tos_in());
2034 guarantee(entry != NULL, "entry must have been generated");
2035 __ call(entry, relocInfo::none);
2036 __ delayed()->nop();
2037 }
2040 void TemplateInterpreterGenerator::stop_interpreter_at() {
2041 AddressLiteral counter(&BytecodeCounter::_counter_value);
2042 __ load_contents(counter, G3_scratch);
2043 AddressLiteral stop_at(&StopInterpreterAt);
2044 __ load_ptr_contents(stop_at, G4_scratch);
2045 __ cmp(G3_scratch, G4_scratch);
2046 __ breakpoint_trap(Assembler::equal);
2047 }
2048 #endif // not PRODUCT
2049 #endif // !CC_INTERP