Wed, 21 Jan 2015 12:38:11 +0100
8068013: [TESTBUG] Aix support in hotspot jtreg tests
Reviewed-by: ctornqvi, fzhinkin, farvidsson
1 /*
2 * Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/macroAssembler.hpp"
27 #include "asm/macroAssembler.inline.hpp"
28 #include "code/debugInfoRec.hpp"
29 #include "code/icBuffer.hpp"
30 #include "code/vtableStubs.hpp"
31 #include "interpreter/interpreter.hpp"
32 #include "oops/compiledICHolder.hpp"
33 #include "prims/jvmtiRedefineClassesTrace.hpp"
34 #include "runtime/sharedRuntime.hpp"
35 #include "runtime/vframeArray.hpp"
36 #include "vmreg_x86.inline.hpp"
37 #ifdef COMPILER1
38 #include "c1/c1_Runtime1.hpp"
39 #endif
40 #ifdef COMPILER2
41 #include "opto/runtime.hpp"
42 #endif
44 #define __ masm->
46 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;
48 class RegisterSaver {
49 // Capture info about frame layout
50 #define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off
51 enum layout {
52 fpu_state_off = 0,
53 fpu_state_end = fpu_state_off+FPUStateSizeInWords,
54 st0_off, st0H_off,
55 st1_off, st1H_off,
56 st2_off, st2H_off,
57 st3_off, st3H_off,
58 st4_off, st4H_off,
59 st5_off, st5H_off,
60 st6_off, st6H_off,
61 st7_off, st7H_off,
62 xmm_off,
63 DEF_XMM_OFFS(0),
64 DEF_XMM_OFFS(1),
65 DEF_XMM_OFFS(2),
66 DEF_XMM_OFFS(3),
67 DEF_XMM_OFFS(4),
68 DEF_XMM_OFFS(5),
69 DEF_XMM_OFFS(6),
70 DEF_XMM_OFFS(7),
71 flags_off = xmm7_off + 16/BytesPerInt + 1, // 16-byte stack alignment fill word
72 rdi_off,
73 rsi_off,
74 ignore_off, // extra copy of rbp,
75 rsp_off,
76 rbx_off,
77 rdx_off,
78 rcx_off,
79 rax_off,
80 // The frame sender code expects that rbp will be in the "natural" place and
81 // will override any oopMap setting for it. We must therefore force the layout
82 // so that it agrees with the frame sender code.
83 rbp_off,
84 return_off, // slot for return address
85 reg_save_size };
86 enum { FPU_regs_live = flags_off - fpu_state_end };
88 public:
90 static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words,
91 int* total_frame_words, bool verify_fpu = true, bool save_vectors = false);
92 static void restore_live_registers(MacroAssembler* masm, bool restore_vectors = false);
94 static int rax_offset() { return rax_off; }
95 static int rbx_offset() { return rbx_off; }
97 // Offsets into the register save area
98 // Used by deoptimization when it is managing result register
99 // values on its own
101 static int raxOffset(void) { return rax_off; }
102 static int rdxOffset(void) { return rdx_off; }
103 static int rbxOffset(void) { return rbx_off; }
104 static int xmm0Offset(void) { return xmm0_off; }
105 // This really returns a slot in the fp save area, which one is not important
106 static int fpResultOffset(void) { return st0_off; }
108 // During deoptimization only the result register need to be restored
109 // all the other values have already been extracted.
111 static void restore_result_registers(MacroAssembler* masm);
113 };
115 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words,
116 int* total_frame_words, bool verify_fpu, bool save_vectors) {
117 int vect_words = 0;
118 #ifdef COMPILER2
119 if (save_vectors) {
120 assert(UseAVX > 0, "256bit vectors are supported only with AVX");
121 assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
122 // Save upper half of YMM registes
123 vect_words = 8 * 16 / wordSize;
124 additional_frame_words += vect_words;
125 }
126 #else
127 assert(!save_vectors, "vectors are generated only by C2");
128 #endif
129 int frame_size_in_bytes = (reg_save_size + additional_frame_words) * wordSize;
130 int frame_words = frame_size_in_bytes / wordSize;
131 *total_frame_words = frame_words;
133 assert(FPUStateSizeInWords == 27, "update stack layout");
135 // save registers, fpu state, and flags
136 // We assume caller has already has return address slot on the stack
137 // We push epb twice in this sequence because we want the real rbp,
138 // to be under the return like a normal enter and we want to use pusha
139 // We push by hand instead of pusing push
140 __ enter();
141 __ pusha();
142 __ pushf();
143 __ subptr(rsp,FPU_regs_live*wordSize); // Push FPU registers space
144 __ push_FPU_state(); // Save FPU state & init
146 if (verify_fpu) {
147 // Some stubs may have non standard FPU control word settings so
148 // only check and reset the value when it required to be the
149 // standard value. The safepoint blob in particular can be used
150 // in methods which are using the 24 bit control word for
151 // optimized float math.
153 #ifdef ASSERT
154 // Make sure the control word has the expected value
155 Label ok;
156 __ cmpw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
157 __ jccb(Assembler::equal, ok);
158 __ stop("corrupted control word detected");
159 __ bind(ok);
160 #endif
162 // Reset the control word to guard against exceptions being unmasked
163 // since fstp_d can cause FPU stack underflow exceptions. Write it
164 // into the on stack copy and then reload that to make sure that the
165 // current and future values are correct.
166 __ movw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std());
167 }
169 __ frstor(Address(rsp, 0));
170 if (!verify_fpu) {
171 // Set the control word so that exceptions are masked for the
172 // following code.
173 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
174 }
176 // Save the FPU registers in de-opt-able form
178 __ fstp_d(Address(rsp, st0_off*wordSize)); // st(0)
179 __ fstp_d(Address(rsp, st1_off*wordSize)); // st(1)
180 __ fstp_d(Address(rsp, st2_off*wordSize)); // st(2)
181 __ fstp_d(Address(rsp, st3_off*wordSize)); // st(3)
182 __ fstp_d(Address(rsp, st4_off*wordSize)); // st(4)
183 __ fstp_d(Address(rsp, st5_off*wordSize)); // st(5)
184 __ fstp_d(Address(rsp, st6_off*wordSize)); // st(6)
185 __ fstp_d(Address(rsp, st7_off*wordSize)); // st(7)
187 if( UseSSE == 1 ) { // Save the XMM state
188 __ movflt(Address(rsp,xmm0_off*wordSize),xmm0);
189 __ movflt(Address(rsp,xmm1_off*wordSize),xmm1);
190 __ movflt(Address(rsp,xmm2_off*wordSize),xmm2);
191 __ movflt(Address(rsp,xmm3_off*wordSize),xmm3);
192 __ movflt(Address(rsp,xmm4_off*wordSize),xmm4);
193 __ movflt(Address(rsp,xmm5_off*wordSize),xmm5);
194 __ movflt(Address(rsp,xmm6_off*wordSize),xmm6);
195 __ movflt(Address(rsp,xmm7_off*wordSize),xmm7);
196 } else if( UseSSE >= 2 ) {
197 // Save whole 128bit (16 bytes) XMM regiters
198 __ movdqu(Address(rsp,xmm0_off*wordSize),xmm0);
199 __ movdqu(Address(rsp,xmm1_off*wordSize),xmm1);
200 __ movdqu(Address(rsp,xmm2_off*wordSize),xmm2);
201 __ movdqu(Address(rsp,xmm3_off*wordSize),xmm3);
202 __ movdqu(Address(rsp,xmm4_off*wordSize),xmm4);
203 __ movdqu(Address(rsp,xmm5_off*wordSize),xmm5);
204 __ movdqu(Address(rsp,xmm6_off*wordSize),xmm6);
205 __ movdqu(Address(rsp,xmm7_off*wordSize),xmm7);
206 }
208 if (vect_words > 0) {
209 assert(vect_words*wordSize == 128, "");
210 __ subptr(rsp, 128); // Save upper half of YMM registes
211 __ vextractf128h(Address(rsp, 0),xmm0);
212 __ vextractf128h(Address(rsp, 16),xmm1);
213 __ vextractf128h(Address(rsp, 32),xmm2);
214 __ vextractf128h(Address(rsp, 48),xmm3);
215 __ vextractf128h(Address(rsp, 64),xmm4);
216 __ vextractf128h(Address(rsp, 80),xmm5);
217 __ vextractf128h(Address(rsp, 96),xmm6);
218 __ vextractf128h(Address(rsp,112),xmm7);
219 }
221 // Set an oopmap for the call site. This oopmap will map all
222 // oop-registers and debug-info registers as callee-saved. This
223 // will allow deoptimization at this safepoint to find all possible
224 // debug-info recordings, as well as let GC find all oops.
226 OopMapSet *oop_maps = new OopMapSet();
227 OopMap* map = new OopMap( frame_words, 0 );
229 #define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_words)
231 map->set_callee_saved(STACK_OFFSET( rax_off), rax->as_VMReg());
232 map->set_callee_saved(STACK_OFFSET( rcx_off), rcx->as_VMReg());
233 map->set_callee_saved(STACK_OFFSET( rdx_off), rdx->as_VMReg());
234 map->set_callee_saved(STACK_OFFSET( rbx_off), rbx->as_VMReg());
235 // rbp, location is known implicitly, no oopMap
236 map->set_callee_saved(STACK_OFFSET( rsi_off), rsi->as_VMReg());
237 map->set_callee_saved(STACK_OFFSET( rdi_off), rdi->as_VMReg());
238 map->set_callee_saved(STACK_OFFSET(st0_off), as_FloatRegister(0)->as_VMReg());
239 map->set_callee_saved(STACK_OFFSET(st1_off), as_FloatRegister(1)->as_VMReg());
240 map->set_callee_saved(STACK_OFFSET(st2_off), as_FloatRegister(2)->as_VMReg());
241 map->set_callee_saved(STACK_OFFSET(st3_off), as_FloatRegister(3)->as_VMReg());
242 map->set_callee_saved(STACK_OFFSET(st4_off), as_FloatRegister(4)->as_VMReg());
243 map->set_callee_saved(STACK_OFFSET(st5_off), as_FloatRegister(5)->as_VMReg());
244 map->set_callee_saved(STACK_OFFSET(st6_off), as_FloatRegister(6)->as_VMReg());
245 map->set_callee_saved(STACK_OFFSET(st7_off), as_FloatRegister(7)->as_VMReg());
246 map->set_callee_saved(STACK_OFFSET(xmm0_off), xmm0->as_VMReg());
247 map->set_callee_saved(STACK_OFFSET(xmm1_off), xmm1->as_VMReg());
248 map->set_callee_saved(STACK_OFFSET(xmm2_off), xmm2->as_VMReg());
249 map->set_callee_saved(STACK_OFFSET(xmm3_off), xmm3->as_VMReg());
250 map->set_callee_saved(STACK_OFFSET(xmm4_off), xmm4->as_VMReg());
251 map->set_callee_saved(STACK_OFFSET(xmm5_off), xmm5->as_VMReg());
252 map->set_callee_saved(STACK_OFFSET(xmm6_off), xmm6->as_VMReg());
253 map->set_callee_saved(STACK_OFFSET(xmm7_off), xmm7->as_VMReg());
254 // %%% This is really a waste but we'll keep things as they were for now
255 if (true) {
256 #define NEXTREG(x) (x)->as_VMReg()->next()
257 map->set_callee_saved(STACK_OFFSET(st0H_off), NEXTREG(as_FloatRegister(0)));
258 map->set_callee_saved(STACK_OFFSET(st1H_off), NEXTREG(as_FloatRegister(1)));
259 map->set_callee_saved(STACK_OFFSET(st2H_off), NEXTREG(as_FloatRegister(2)));
260 map->set_callee_saved(STACK_OFFSET(st3H_off), NEXTREG(as_FloatRegister(3)));
261 map->set_callee_saved(STACK_OFFSET(st4H_off), NEXTREG(as_FloatRegister(4)));
262 map->set_callee_saved(STACK_OFFSET(st5H_off), NEXTREG(as_FloatRegister(5)));
263 map->set_callee_saved(STACK_OFFSET(st6H_off), NEXTREG(as_FloatRegister(6)));
264 map->set_callee_saved(STACK_OFFSET(st7H_off), NEXTREG(as_FloatRegister(7)));
265 map->set_callee_saved(STACK_OFFSET(xmm0H_off), NEXTREG(xmm0));
266 map->set_callee_saved(STACK_OFFSET(xmm1H_off), NEXTREG(xmm1));
267 map->set_callee_saved(STACK_OFFSET(xmm2H_off), NEXTREG(xmm2));
268 map->set_callee_saved(STACK_OFFSET(xmm3H_off), NEXTREG(xmm3));
269 map->set_callee_saved(STACK_OFFSET(xmm4H_off), NEXTREG(xmm4));
270 map->set_callee_saved(STACK_OFFSET(xmm5H_off), NEXTREG(xmm5));
271 map->set_callee_saved(STACK_OFFSET(xmm6H_off), NEXTREG(xmm6));
272 map->set_callee_saved(STACK_OFFSET(xmm7H_off), NEXTREG(xmm7));
273 #undef NEXTREG
274 #undef STACK_OFFSET
275 }
277 return map;
279 }
281 void RegisterSaver::restore_live_registers(MacroAssembler* masm, bool restore_vectors) {
282 // Recover XMM & FPU state
283 int additional_frame_bytes = 0;
284 #ifdef COMPILER2
285 if (restore_vectors) {
286 assert(UseAVX > 0, "256bit vectors are supported only with AVX");
287 assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
288 additional_frame_bytes = 128;
289 }
290 #else
291 assert(!restore_vectors, "vectors are generated only by C2");
292 #endif
293 if (UseSSE == 1) {
294 assert(additional_frame_bytes == 0, "");
295 __ movflt(xmm0,Address(rsp,xmm0_off*wordSize));
296 __ movflt(xmm1,Address(rsp,xmm1_off*wordSize));
297 __ movflt(xmm2,Address(rsp,xmm2_off*wordSize));
298 __ movflt(xmm3,Address(rsp,xmm3_off*wordSize));
299 __ movflt(xmm4,Address(rsp,xmm4_off*wordSize));
300 __ movflt(xmm5,Address(rsp,xmm5_off*wordSize));
301 __ movflt(xmm6,Address(rsp,xmm6_off*wordSize));
302 __ movflt(xmm7,Address(rsp,xmm7_off*wordSize));
303 } else if (UseSSE >= 2) {
304 #define STACK_ADDRESS(x) Address(rsp,(x)*wordSize + additional_frame_bytes)
305 __ movdqu(xmm0,STACK_ADDRESS(xmm0_off));
306 __ movdqu(xmm1,STACK_ADDRESS(xmm1_off));
307 __ movdqu(xmm2,STACK_ADDRESS(xmm2_off));
308 __ movdqu(xmm3,STACK_ADDRESS(xmm3_off));
309 __ movdqu(xmm4,STACK_ADDRESS(xmm4_off));
310 __ movdqu(xmm5,STACK_ADDRESS(xmm5_off));
311 __ movdqu(xmm6,STACK_ADDRESS(xmm6_off));
312 __ movdqu(xmm7,STACK_ADDRESS(xmm7_off));
313 #undef STACK_ADDRESS
314 }
315 if (restore_vectors) {
316 // Restore upper half of YMM registes.
317 assert(additional_frame_bytes == 128, "");
318 __ vinsertf128h(xmm0, Address(rsp, 0));
319 __ vinsertf128h(xmm1, Address(rsp, 16));
320 __ vinsertf128h(xmm2, Address(rsp, 32));
321 __ vinsertf128h(xmm3, Address(rsp, 48));
322 __ vinsertf128h(xmm4, Address(rsp, 64));
323 __ vinsertf128h(xmm5, Address(rsp, 80));
324 __ vinsertf128h(xmm6, Address(rsp, 96));
325 __ vinsertf128h(xmm7, Address(rsp,112));
326 __ addptr(rsp, additional_frame_bytes);
327 }
328 __ pop_FPU_state();
329 __ addptr(rsp, FPU_regs_live*wordSize); // Pop FPU registers
331 __ popf();
332 __ popa();
333 // Get the rbp, described implicitly by the frame sender code (no oopMap)
334 __ pop(rbp);
336 }
338 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
340 // Just restore result register. Only used by deoptimization. By
341 // now any callee save register that needs to be restore to a c2
342 // caller of the deoptee has been extracted into the vframeArray
343 // and will be stuffed into the c2i adapter we create for later
344 // restoration so only result registers need to be restored here.
345 //
347 __ frstor(Address(rsp, 0)); // Restore fpu state
349 // Recover XMM & FPU state
350 if( UseSSE == 1 ) {
351 __ movflt(xmm0, Address(rsp, xmm0_off*wordSize));
352 } else if( UseSSE >= 2 ) {
353 __ movdbl(xmm0, Address(rsp, xmm0_off*wordSize));
354 }
355 __ movptr(rax, Address(rsp, rax_off*wordSize));
356 __ movptr(rdx, Address(rsp, rdx_off*wordSize));
357 // Pop all of the register save are off the stack except the return address
358 __ addptr(rsp, return_off * wordSize);
359 }
361 // Is vector's size (in bytes) bigger than a size saved by default?
362 // 16 bytes XMM registers are saved by default using SSE2 movdqu instructions.
363 // Note, MaxVectorSize == 0 with UseSSE < 2 and vectors are not generated.
364 bool SharedRuntime::is_wide_vector(int size) {
365 return size > 16;
366 }
368 // The java_calling_convention describes stack locations as ideal slots on
369 // a frame with no abi restrictions. Since we must observe abi restrictions
370 // (like the placement of the register window) the slots must be biased by
371 // the following value.
372 static int reg2offset_in(VMReg r) {
373 // Account for saved rbp, and return address
374 // This should really be in_preserve_stack_slots
375 return (r->reg2stack() + 2) * VMRegImpl::stack_slot_size;
376 }
378 static int reg2offset_out(VMReg r) {
379 return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
380 }
382 // ---------------------------------------------------------------------------
383 // Read the array of BasicTypes from a signature, and compute where the
384 // arguments should go. Values in the VMRegPair regs array refer to 4-byte
385 // quantities. Values less than SharedInfo::stack0 are registers, those above
386 // refer to 4-byte stack slots. All stack slots are based off of the stack pointer
387 // as framesizes are fixed.
388 // VMRegImpl::stack0 refers to the first slot 0(sp).
389 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register
390 // up to RegisterImpl::number_of_registers) are the 32-bit
391 // integer registers.
393 // Pass first two oop/int args in registers ECX and EDX.
394 // Pass first two float/double args in registers XMM0 and XMM1.
395 // Doubles have precedence, so if you pass a mix of floats and doubles
396 // the doubles will grab the registers before the floats will.
398 // Note: the INPUTS in sig_bt are in units of Java argument words, which are
399 // either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit
400 // units regardless of build. Of course for i486 there is no 64 bit build
403 // ---------------------------------------------------------------------------
404 // The compiled Java calling convention.
405 // Pass first two oop/int args in registers ECX and EDX.
406 // Pass first two float/double args in registers XMM0 and XMM1.
407 // Doubles have precedence, so if you pass a mix of floats and doubles
408 // the doubles will grab the registers before the floats will.
409 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
410 VMRegPair *regs,
411 int total_args_passed,
412 int is_outgoing) {
413 uint stack = 0; // Starting stack position for args on stack
416 // Pass first two oop/int args in registers ECX and EDX.
417 uint reg_arg0 = 9999;
418 uint reg_arg1 = 9999;
420 // Pass first two float/double args in registers XMM0 and XMM1.
421 // Doubles have precedence, so if you pass a mix of floats and doubles
422 // the doubles will grab the registers before the floats will.
423 // CNC - TURNED OFF FOR non-SSE.
424 // On Intel we have to round all doubles (and most floats) at
425 // call sites by storing to the stack in any case.
426 // UseSSE=0 ==> Don't Use ==> 9999+0
427 // UseSSE=1 ==> Floats only ==> 9999+1
428 // UseSSE>=2 ==> Floats or doubles ==> 9999+2
429 enum { fltarg_dontuse = 9999+0, fltarg_float_only = 9999+1, fltarg_flt_dbl = 9999+2 };
430 uint fargs = (UseSSE>=2) ? 2 : UseSSE;
431 uint freg_arg0 = 9999+fargs;
432 uint freg_arg1 = 9999+fargs;
434 // Pass doubles & longs aligned on the stack. First count stack slots for doubles
435 int i;
436 for( i = 0; i < total_args_passed; i++) {
437 if( sig_bt[i] == T_DOUBLE ) {
438 // first 2 doubles go in registers
439 if( freg_arg0 == fltarg_flt_dbl ) freg_arg0 = i;
440 else if( freg_arg1 == fltarg_flt_dbl ) freg_arg1 = i;
441 else // Else double is passed low on the stack to be aligned.
442 stack += 2;
443 } else if( sig_bt[i] == T_LONG ) {
444 stack += 2;
445 }
446 }
447 int dstack = 0; // Separate counter for placing doubles
449 // Now pick where all else goes.
450 for( i = 0; i < total_args_passed; i++) {
451 // From the type and the argument number (count) compute the location
452 switch( sig_bt[i] ) {
453 case T_SHORT:
454 case T_CHAR:
455 case T_BYTE:
456 case T_BOOLEAN:
457 case T_INT:
458 case T_ARRAY:
459 case T_OBJECT:
460 case T_ADDRESS:
461 if( reg_arg0 == 9999 ) {
462 reg_arg0 = i;
463 regs[i].set1(rcx->as_VMReg());
464 } else if( reg_arg1 == 9999 ) {
465 reg_arg1 = i;
466 regs[i].set1(rdx->as_VMReg());
467 } else {
468 regs[i].set1(VMRegImpl::stack2reg(stack++));
469 }
470 break;
471 case T_FLOAT:
472 if( freg_arg0 == fltarg_flt_dbl || freg_arg0 == fltarg_float_only ) {
473 freg_arg0 = i;
474 regs[i].set1(xmm0->as_VMReg());
475 } else if( freg_arg1 == fltarg_flt_dbl || freg_arg1 == fltarg_float_only ) {
476 freg_arg1 = i;
477 regs[i].set1(xmm1->as_VMReg());
478 } else {
479 regs[i].set1(VMRegImpl::stack2reg(stack++));
480 }
481 break;
482 case T_LONG:
483 assert(sig_bt[i+1] == T_VOID, "missing Half" );
484 regs[i].set2(VMRegImpl::stack2reg(dstack));
485 dstack += 2;
486 break;
487 case T_DOUBLE:
488 assert(sig_bt[i+1] == T_VOID, "missing Half" );
489 if( freg_arg0 == (uint)i ) {
490 regs[i].set2(xmm0->as_VMReg());
491 } else if( freg_arg1 == (uint)i ) {
492 regs[i].set2(xmm1->as_VMReg());
493 } else {
494 regs[i].set2(VMRegImpl::stack2reg(dstack));
495 dstack += 2;
496 }
497 break;
498 case T_VOID: regs[i].set_bad(); break;
499 break;
500 default:
501 ShouldNotReachHere();
502 break;
503 }
504 }
506 // return value can be odd number of VMRegImpl stack slots make multiple of 2
507 return round_to(stack, 2);
508 }
510 // Patch the callers callsite with entry to compiled code if it exists.
511 static void patch_callers_callsite(MacroAssembler *masm) {
512 Label L;
513 __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
514 __ jcc(Assembler::equal, L);
515 // Schedule the branch target address early.
516 // Call into the VM to patch the caller, then jump to compiled callee
517 // rax, isn't live so capture return address while we easily can
518 __ movptr(rax, Address(rsp, 0));
519 __ pusha();
520 __ pushf();
522 if (UseSSE == 1) {
523 __ subptr(rsp, 2*wordSize);
524 __ movflt(Address(rsp, 0), xmm0);
525 __ movflt(Address(rsp, wordSize), xmm1);
526 }
527 if (UseSSE >= 2) {
528 __ subptr(rsp, 4*wordSize);
529 __ movdbl(Address(rsp, 0), xmm0);
530 __ movdbl(Address(rsp, 2*wordSize), xmm1);
531 }
532 #ifdef COMPILER2
533 // C2 may leave the stack dirty if not in SSE2+ mode
534 if (UseSSE >= 2) {
535 __ verify_FPU(0, "c2i transition should have clean FPU stack");
536 } else {
537 __ empty_FPU_stack();
538 }
539 #endif /* COMPILER2 */
541 // VM needs caller's callsite
542 __ push(rax);
543 // VM needs target method
544 __ push(rbx);
545 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
546 __ addptr(rsp, 2*wordSize);
548 if (UseSSE == 1) {
549 __ movflt(xmm0, Address(rsp, 0));
550 __ movflt(xmm1, Address(rsp, wordSize));
551 __ addptr(rsp, 2*wordSize);
552 }
553 if (UseSSE >= 2) {
554 __ movdbl(xmm0, Address(rsp, 0));
555 __ movdbl(xmm1, Address(rsp, 2*wordSize));
556 __ addptr(rsp, 4*wordSize);
557 }
559 __ popf();
560 __ popa();
561 __ bind(L);
562 }
565 static void move_c2i_double(MacroAssembler *masm, XMMRegister r, int st_off) {
566 int next_off = st_off - Interpreter::stackElementSize;
567 __ movdbl(Address(rsp, next_off), r);
568 }
570 static void gen_c2i_adapter(MacroAssembler *masm,
571 int total_args_passed,
572 int comp_args_on_stack,
573 const BasicType *sig_bt,
574 const VMRegPair *regs,
575 Label& skip_fixup) {
576 // Before we get into the guts of the C2I adapter, see if we should be here
577 // at all. We've come from compiled code and are attempting to jump to the
578 // interpreter, which means the caller made a static call to get here
579 // (vcalls always get a compiled target if there is one). Check for a
580 // compiled target. If there is one, we need to patch the caller's call.
581 patch_callers_callsite(masm);
583 __ bind(skip_fixup);
585 #ifdef COMPILER2
586 // C2 may leave the stack dirty if not in SSE2+ mode
587 if (UseSSE >= 2) {
588 __ verify_FPU(0, "c2i transition should have clean FPU stack");
589 } else {
590 __ empty_FPU_stack();
591 }
592 #endif /* COMPILER2 */
594 // Since all args are passed on the stack, total_args_passed * interpreter_
595 // stack_element_size is the
596 // space we need.
597 int extraspace = total_args_passed * Interpreter::stackElementSize;
599 // Get return address
600 __ pop(rax);
602 // set senderSP value
603 __ movptr(rsi, rsp);
605 __ subptr(rsp, extraspace);
607 // Now write the args into the outgoing interpreter space
608 for (int i = 0; i < total_args_passed; i++) {
609 if (sig_bt[i] == T_VOID) {
610 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
611 continue;
612 }
614 // st_off points to lowest address on stack.
615 int st_off = ((total_args_passed - 1) - i) * Interpreter::stackElementSize;
616 int next_off = st_off - Interpreter::stackElementSize;
618 // Say 4 args:
619 // i st_off
620 // 0 12 T_LONG
621 // 1 8 T_VOID
622 // 2 4 T_OBJECT
623 // 3 0 T_BOOL
624 VMReg r_1 = regs[i].first();
625 VMReg r_2 = regs[i].second();
626 if (!r_1->is_valid()) {
627 assert(!r_2->is_valid(), "");
628 continue;
629 }
631 if (r_1->is_stack()) {
632 // memory to memory use fpu stack top
633 int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;
635 if (!r_2->is_valid()) {
636 __ movl(rdi, Address(rsp, ld_off));
637 __ movptr(Address(rsp, st_off), rdi);
638 } else {
640 // ld_off == LSW, ld_off+VMRegImpl::stack_slot_size == MSW
641 // st_off == MSW, st_off-wordSize == LSW
643 __ movptr(rdi, Address(rsp, ld_off));
644 __ movptr(Address(rsp, next_off), rdi);
645 #ifndef _LP64
646 __ movptr(rdi, Address(rsp, ld_off + wordSize));
647 __ movptr(Address(rsp, st_off), rdi);
648 #else
649 #ifdef ASSERT
650 // Overwrite the unused slot with known junk
651 __ mov64(rax, CONST64(0xdeadffffdeadaaaa));
652 __ movptr(Address(rsp, st_off), rax);
653 #endif /* ASSERT */
654 #endif // _LP64
655 }
656 } else if (r_1->is_Register()) {
657 Register r = r_1->as_Register();
658 if (!r_2->is_valid()) {
659 __ movl(Address(rsp, st_off), r);
660 } else {
661 // long/double in gpr
662 NOT_LP64(ShouldNotReachHere());
663 // Two VMRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
664 // T_DOUBLE and T_LONG use two slots in the interpreter
665 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
666 // long/double in gpr
667 #ifdef ASSERT
668 // Overwrite the unused slot with known junk
669 LP64_ONLY(__ mov64(rax, CONST64(0xdeadffffdeadaaab)));
670 __ movptr(Address(rsp, st_off), rax);
671 #endif /* ASSERT */
672 __ movptr(Address(rsp, next_off), r);
673 } else {
674 __ movptr(Address(rsp, st_off), r);
675 }
676 }
677 } else {
678 assert(r_1->is_XMMRegister(), "");
679 if (!r_2->is_valid()) {
680 __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
681 } else {
682 assert(sig_bt[i] == T_DOUBLE || sig_bt[i] == T_LONG, "wrong type");
683 move_c2i_double(masm, r_1->as_XMMRegister(), st_off);
684 }
685 }
686 }
688 // Schedule the branch target address early.
689 __ movptr(rcx, Address(rbx, in_bytes(Method::interpreter_entry_offset())));
690 // And repush original return address
691 __ push(rax);
692 __ jmp(rcx);
693 }
696 static void move_i2c_double(MacroAssembler *masm, XMMRegister r, Register saved_sp, int ld_off) {
697 int next_val_off = ld_off - Interpreter::stackElementSize;
698 __ movdbl(r, Address(saved_sp, next_val_off));
699 }
701 static void range_check(MacroAssembler* masm, Register pc_reg, Register temp_reg,
702 address code_start, address code_end,
703 Label& L_ok) {
704 Label L_fail;
705 __ lea(temp_reg, ExternalAddress(code_start));
706 __ cmpptr(pc_reg, temp_reg);
707 __ jcc(Assembler::belowEqual, L_fail);
708 __ lea(temp_reg, ExternalAddress(code_end));
709 __ cmpptr(pc_reg, temp_reg);
710 __ jcc(Assembler::below, L_ok);
711 __ bind(L_fail);
712 }
714 static void gen_i2c_adapter(MacroAssembler *masm,
715 int total_args_passed,
716 int comp_args_on_stack,
717 const BasicType *sig_bt,
718 const VMRegPair *regs) {
720 // Note: rsi contains the senderSP on entry. We must preserve it since
721 // we may do a i2c -> c2i transition if we lose a race where compiled
722 // code goes non-entrant while we get args ready.
724 // Adapters can be frameless because they do not require the caller
725 // to perform additional cleanup work, such as correcting the stack pointer.
726 // An i2c adapter is frameless because the *caller* frame, which is interpreted,
727 // routinely repairs its own stack pointer (from interpreter_frame_last_sp),
728 // even if a callee has modified the stack pointer.
729 // A c2i adapter is frameless because the *callee* frame, which is interpreted,
730 // routinely repairs its caller's stack pointer (from sender_sp, which is set
731 // up via the senderSP register).
732 // In other words, if *either* the caller or callee is interpreted, we can
733 // get the stack pointer repaired after a call.
734 // This is why c2i and i2c adapters cannot be indefinitely composed.
735 // In particular, if a c2i adapter were to somehow call an i2c adapter,
736 // both caller and callee would be compiled methods, and neither would
737 // clean up the stack pointer changes performed by the two adapters.
738 // If this happens, control eventually transfers back to the compiled
739 // caller, but with an uncorrected stack, causing delayed havoc.
741 // Pick up the return address
742 __ movptr(rax, Address(rsp, 0));
744 if (VerifyAdapterCalls &&
745 (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) {
746 // So, let's test for cascading c2i/i2c adapters right now.
747 // assert(Interpreter::contains($return_addr) ||
748 // StubRoutines::contains($return_addr),
749 // "i2c adapter must return to an interpreter frame");
750 __ block_comment("verify_i2c { ");
751 Label L_ok;
752 if (Interpreter::code() != NULL)
753 range_check(masm, rax, rdi,
754 Interpreter::code()->code_start(), Interpreter::code()->code_end(),
755 L_ok);
756 if (StubRoutines::code1() != NULL)
757 range_check(masm, rax, rdi,
758 StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(),
759 L_ok);
760 if (StubRoutines::code2() != NULL)
761 range_check(masm, rax, rdi,
762 StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(),
763 L_ok);
764 const char* msg = "i2c adapter must return to an interpreter frame";
765 __ block_comment(msg);
766 __ stop(msg);
767 __ bind(L_ok);
768 __ block_comment("} verify_i2ce ");
769 }
771 // Must preserve original SP for loading incoming arguments because
772 // we need to align the outgoing SP for compiled code.
773 __ movptr(rdi, rsp);
775 // Cut-out for having no stack args. Since up to 2 int/oop args are passed
776 // in registers, we will occasionally have no stack args.
777 int comp_words_on_stack = 0;
778 if (comp_args_on_stack) {
779 // Sig words on the stack are greater-than VMRegImpl::stack0. Those in
780 // registers are below. By subtracting stack0, we either get a negative
781 // number (all values in registers) or the maximum stack slot accessed.
782 // int comp_args_on_stack = VMRegImpl::reg2stack(max_arg);
783 // Convert 4-byte stack slots to words.
784 comp_words_on_stack = round_to(comp_args_on_stack*4, wordSize)>>LogBytesPerWord;
785 // Round up to miminum stack alignment, in wordSize
786 comp_words_on_stack = round_to(comp_words_on_stack, 2);
787 __ subptr(rsp, comp_words_on_stack * wordSize);
788 }
790 // Align the outgoing SP
791 __ andptr(rsp, -(StackAlignmentInBytes));
793 // push the return address on the stack (note that pushing, rather
794 // than storing it, yields the correct frame alignment for the callee)
795 __ push(rax);
797 // Put saved SP in another register
798 const Register saved_sp = rax;
799 __ movptr(saved_sp, rdi);
802 // Will jump to the compiled code just as if compiled code was doing it.
803 // Pre-load the register-jump target early, to schedule it better.
804 __ movptr(rdi, Address(rbx, in_bytes(Method::from_compiled_offset())));
806 // Now generate the shuffle code. Pick up all register args and move the
807 // rest through the floating point stack top.
808 for (int i = 0; i < total_args_passed; i++) {
809 if (sig_bt[i] == T_VOID) {
810 // Longs and doubles are passed in native word order, but misaligned
811 // in the 32-bit build.
812 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
813 continue;
814 }
816 // Pick up 0, 1 or 2 words from SP+offset.
818 assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
819 "scrambled load targets?");
820 // Load in argument order going down.
821 int ld_off = (total_args_passed - i) * Interpreter::stackElementSize;
822 // Point to interpreter value (vs. tag)
823 int next_off = ld_off - Interpreter::stackElementSize;
824 //
825 //
826 //
827 VMReg r_1 = regs[i].first();
828 VMReg r_2 = regs[i].second();
829 if (!r_1->is_valid()) {
830 assert(!r_2->is_valid(), "");
831 continue;
832 }
833 if (r_1->is_stack()) {
834 // Convert stack slot to an SP offset (+ wordSize to account for return address )
835 int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;
837 // We can use rsi as a temp here because compiled code doesn't need rsi as an input
838 // and if we end up going thru a c2i because of a miss a reasonable value of rsi
839 // we be generated.
840 if (!r_2->is_valid()) {
841 // __ fld_s(Address(saved_sp, ld_off));
842 // __ fstp_s(Address(rsp, st_off));
843 __ movl(rsi, Address(saved_sp, ld_off));
844 __ movptr(Address(rsp, st_off), rsi);
845 } else {
846 // Interpreter local[n] == MSW, local[n+1] == LSW however locals
847 // are accessed as negative so LSW is at LOW address
849 // ld_off is MSW so get LSW
850 // st_off is LSW (i.e. reg.first())
851 // __ fld_d(Address(saved_sp, next_off));
852 // __ fstp_d(Address(rsp, st_off));
853 //
854 // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
855 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
856 // So we must adjust where to pick up the data to match the interpreter.
857 //
858 // Interpreter local[n] == MSW, local[n+1] == LSW however locals
859 // are accessed as negative so LSW is at LOW address
861 // ld_off is MSW so get LSW
862 const int offset = (NOT_LP64(true ||) sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
863 next_off : ld_off;
864 __ movptr(rsi, Address(saved_sp, offset));
865 __ movptr(Address(rsp, st_off), rsi);
866 #ifndef _LP64
867 __ movptr(rsi, Address(saved_sp, ld_off));
868 __ movptr(Address(rsp, st_off + wordSize), rsi);
869 #endif // _LP64
870 }
871 } else if (r_1->is_Register()) { // Register argument
872 Register r = r_1->as_Register();
873 assert(r != rax, "must be different");
874 if (r_2->is_valid()) {
875 //
876 // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
877 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
878 // So we must adjust where to pick up the data to match the interpreter.
880 const int offset = (NOT_LP64(true ||) sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
881 next_off : ld_off;
883 // this can be a misaligned move
884 __ movptr(r, Address(saved_sp, offset));
885 #ifndef _LP64
886 assert(r_2->as_Register() != rax, "need another temporary register");
887 // Remember r_1 is low address (and LSB on x86)
888 // So r_2 gets loaded from high address regardless of the platform
889 __ movptr(r_2->as_Register(), Address(saved_sp, ld_off));
890 #endif // _LP64
891 } else {
892 __ movl(r, Address(saved_sp, ld_off));
893 }
894 } else {
895 assert(r_1->is_XMMRegister(), "");
896 if (!r_2->is_valid()) {
897 __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
898 } else {
899 move_i2c_double(masm, r_1->as_XMMRegister(), saved_sp, ld_off);
900 }
901 }
902 }
904 // 6243940 We might end up in handle_wrong_method if
905 // the callee is deoptimized as we race thru here. If that
906 // happens we don't want to take a safepoint because the
907 // caller frame will look interpreted and arguments are now
908 // "compiled" so it is much better to make this transition
909 // invisible to the stack walking code. Unfortunately if
910 // we try and find the callee by normal means a safepoint
911 // is possible. So we stash the desired callee in the thread
912 // and the vm will find there should this case occur.
914 __ get_thread(rax);
915 __ movptr(Address(rax, JavaThread::callee_target_offset()), rbx);
917 // move Method* to rax, in case we end up in an c2i adapter.
918 // the c2i adapters expect Method* in rax, (c2) because c2's
919 // resolve stubs return the result (the method) in rax,.
920 // I'd love to fix this.
921 __ mov(rax, rbx);
923 __ jmp(rdi);
924 }
926 // ---------------------------------------------------------------
927 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
928 int total_args_passed,
929 int comp_args_on_stack,
930 const BasicType *sig_bt,
931 const VMRegPair *regs,
932 AdapterFingerPrint* fingerprint) {
933 address i2c_entry = __ pc();
935 gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);
937 // -------------------------------------------------------------------------
938 // Generate a C2I adapter. On entry we know rbx, holds the Method* during calls
939 // to the interpreter. The args start out packed in the compiled layout. They
940 // need to be unpacked into the interpreter layout. This will almost always
941 // require some stack space. We grow the current (compiled) stack, then repack
942 // the args. We finally end in a jump to the generic interpreter entry point.
943 // On exit from the interpreter, the interpreter will restore our SP (lest the
944 // compiled code, which relys solely on SP and not EBP, get sick).
946 address c2i_unverified_entry = __ pc();
947 Label skip_fixup;
949 Register holder = rax;
950 Register receiver = rcx;
951 Register temp = rbx;
953 {
955 Label missed;
956 __ movptr(temp, Address(receiver, oopDesc::klass_offset_in_bytes()));
957 __ cmpptr(temp, Address(holder, CompiledICHolder::holder_klass_offset()));
958 __ movptr(rbx, Address(holder, CompiledICHolder::holder_method_offset()));
959 __ jcc(Assembler::notEqual, missed);
960 // Method might have been compiled since the call site was patched to
961 // interpreted if that is the case treat it as a miss so we can get
962 // the call site corrected.
963 __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
964 __ jcc(Assembler::equal, skip_fixup);
966 __ bind(missed);
967 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
968 }
970 address c2i_entry = __ pc();
972 gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);
974 __ flush();
975 return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);
976 }
978 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
979 VMRegPair *regs,
980 VMRegPair *regs2,
981 int total_args_passed) {
982 assert(regs2 == NULL, "not needed on x86");
983 // We return the amount of VMRegImpl stack slots we need to reserve for all
984 // the arguments NOT counting out_preserve_stack_slots.
986 uint stack = 0; // All arguments on stack
988 for( int i = 0; i < total_args_passed; i++) {
989 // From the type and the argument number (count) compute the location
990 switch( sig_bt[i] ) {
991 case T_BOOLEAN:
992 case T_CHAR:
993 case T_FLOAT:
994 case T_BYTE:
995 case T_SHORT:
996 case T_INT:
997 case T_OBJECT:
998 case T_ARRAY:
999 case T_ADDRESS:
1000 case T_METADATA:
1001 regs[i].set1(VMRegImpl::stack2reg(stack++));
1002 break;
1003 case T_LONG:
1004 case T_DOUBLE: // The stack numbering is reversed from Java
1005 // Since C arguments do not get reversed, the ordering for
1006 // doubles on the stack must be opposite the Java convention
1007 assert(sig_bt[i+1] == T_VOID, "missing Half" );
1008 regs[i].set2(VMRegImpl::stack2reg(stack));
1009 stack += 2;
1010 break;
1011 case T_VOID: regs[i].set_bad(); break;
1012 default:
1013 ShouldNotReachHere();
1014 break;
1015 }
1016 }
1017 return stack;
1018 }
1020 // A simple move of integer like type
1021 static void simple_move32(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1022 if (src.first()->is_stack()) {
1023 if (dst.first()->is_stack()) {
1024 // stack to stack
1025 // __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5);
1026 // __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS);
1027 __ movl2ptr(rax, Address(rbp, reg2offset_in(src.first())));
1028 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1029 } else {
1030 // stack to reg
1031 __ movl2ptr(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
1032 }
1033 } else if (dst.first()->is_stack()) {
1034 // reg to stack
1035 // no need to sign extend on 64bit
1036 __ movptr(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
1037 } else {
1038 if (dst.first() != src.first()) {
1039 __ mov(dst.first()->as_Register(), src.first()->as_Register());
1040 }
1041 }
1042 }
1044 // An oop arg. Must pass a handle not the oop itself
1045 static void object_move(MacroAssembler* masm,
1046 OopMap* map,
1047 int oop_handle_offset,
1048 int framesize_in_slots,
1049 VMRegPair src,
1050 VMRegPair dst,
1051 bool is_receiver,
1052 int* receiver_offset) {
1054 // Because of the calling conventions we know that src can be a
1055 // register or a stack location. dst can only be a stack location.
1057 assert(dst.first()->is_stack(), "must be stack");
1058 // must pass a handle. First figure out the location we use as a handle
1060 if (src.first()->is_stack()) {
1061 // Oop is already on the stack as an argument
1062 Register rHandle = rax;
1063 Label nil;
1064 __ xorptr(rHandle, rHandle);
1065 __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);
1066 __ jcc(Assembler::equal, nil);
1067 __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));
1068 __ bind(nil);
1069 __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
1071 int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1072 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
1073 if (is_receiver) {
1074 *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
1075 }
1076 } else {
1077 // Oop is in an a register we must store it to the space we reserve
1078 // on the stack for oop_handles
1079 const Register rOop = src.first()->as_Register();
1080 const Register rHandle = rax;
1081 int oop_slot = (rOop == rcx ? 0 : 1) * VMRegImpl::slots_per_word + oop_handle_offset;
1082 int offset = oop_slot*VMRegImpl::stack_slot_size;
1083 Label skip;
1084 __ movptr(Address(rsp, offset), rOop);
1085 map->set_oop(VMRegImpl::stack2reg(oop_slot));
1086 __ xorptr(rHandle, rHandle);
1087 __ cmpptr(rOop, (int32_t)NULL_WORD);
1088 __ jcc(Assembler::equal, skip);
1089 __ lea(rHandle, Address(rsp, offset));
1090 __ bind(skip);
1091 // Store the handle parameter
1092 __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
1093 if (is_receiver) {
1094 *receiver_offset = offset;
1095 }
1096 }
1097 }
1099 // A float arg may have to do float reg int reg conversion
1100 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1101 assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
1103 // Because of the calling convention we know that src is either a stack location
1104 // or an xmm register. dst can only be a stack location.
1106 assert(dst.first()->is_stack() && ( src.first()->is_stack() || src.first()->is_XMMRegister()), "bad parameters");
1108 if (src.first()->is_stack()) {
1109 __ movl(rax, Address(rbp, reg2offset_in(src.first())));
1110 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1111 } else {
1112 // reg to stack
1113 __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1114 }
1115 }
1117 // A long move
1118 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1120 // The only legal possibility for a long_move VMRegPair is:
1121 // 1: two stack slots (possibly unaligned)
1122 // as neither the java or C calling convention will use registers
1123 // for longs.
1125 if (src.first()->is_stack() && dst.first()->is_stack()) {
1126 assert(src.second()->is_stack() && dst.second()->is_stack(), "must be all stack");
1127 __ movptr(rax, Address(rbp, reg2offset_in(src.first())));
1128 NOT_LP64(__ movptr(rbx, Address(rbp, reg2offset_in(src.second()))));
1129 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1130 NOT_LP64(__ movptr(Address(rsp, reg2offset_out(dst.second())), rbx));
1131 } else {
1132 ShouldNotReachHere();
1133 }
1134 }
1136 // A double move
1137 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1139 // The only legal possibilities for a double_move VMRegPair are:
1140 // The painful thing here is that like long_move a VMRegPair might be
1142 // Because of the calling convention we know that src is either
1143 // 1: a single physical register (xmm registers only)
1144 // 2: two stack slots (possibly unaligned)
1145 // dst can only be a pair of stack slots.
1147 assert(dst.first()->is_stack() && (src.first()->is_XMMRegister() || src.first()->is_stack()), "bad args");
1149 if (src.first()->is_stack()) {
1150 // source is all stack
1151 __ movptr(rax, Address(rbp, reg2offset_in(src.first())));
1152 NOT_LP64(__ movptr(rbx, Address(rbp, reg2offset_in(src.second()))));
1153 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1154 NOT_LP64(__ movptr(Address(rsp, reg2offset_out(dst.second())), rbx));
1155 } else {
1156 // reg to stack
1157 // No worries about stack alignment
1158 __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1159 }
1160 }
1163 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1164 // We always ignore the frame_slots arg and just use the space just below frame pointer
1165 // which by this time is free to use
1166 switch (ret_type) {
1167 case T_FLOAT:
1168 __ fstp_s(Address(rbp, -wordSize));
1169 break;
1170 case T_DOUBLE:
1171 __ fstp_d(Address(rbp, -2*wordSize));
1172 break;
1173 case T_VOID: break;
1174 case T_LONG:
1175 __ movptr(Address(rbp, -wordSize), rax);
1176 NOT_LP64(__ movptr(Address(rbp, -2*wordSize), rdx));
1177 break;
1178 default: {
1179 __ movptr(Address(rbp, -wordSize), rax);
1180 }
1181 }
1182 }
1184 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1185 // We always ignore the frame_slots arg and just use the space just below frame pointer
1186 // which by this time is free to use
1187 switch (ret_type) {
1188 case T_FLOAT:
1189 __ fld_s(Address(rbp, -wordSize));
1190 break;
1191 case T_DOUBLE:
1192 __ fld_d(Address(rbp, -2*wordSize));
1193 break;
1194 case T_LONG:
1195 __ movptr(rax, Address(rbp, -wordSize));
1196 NOT_LP64(__ movptr(rdx, Address(rbp, -2*wordSize)));
1197 break;
1198 case T_VOID: break;
1199 default: {
1200 __ movptr(rax, Address(rbp, -wordSize));
1201 }
1202 }
1203 }
1206 static void save_or_restore_arguments(MacroAssembler* masm,
1207 const int stack_slots,
1208 const int total_in_args,
1209 const int arg_save_area,
1210 OopMap* map,
1211 VMRegPair* in_regs,
1212 BasicType* in_sig_bt) {
1213 // if map is non-NULL then the code should store the values,
1214 // otherwise it should load them.
1215 int handle_index = 0;
1216 // Save down double word first
1217 for ( int i = 0; i < total_in_args; i++) {
1218 if (in_regs[i].first()->is_XMMRegister() && in_sig_bt[i] == T_DOUBLE) {
1219 int slot = handle_index * VMRegImpl::slots_per_word + arg_save_area;
1220 int offset = slot * VMRegImpl::stack_slot_size;
1221 handle_index += 2;
1222 assert(handle_index <= stack_slots, "overflow");
1223 if (map != NULL) {
1224 __ movdbl(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
1225 } else {
1226 __ movdbl(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
1227 }
1228 }
1229 if (in_regs[i].first()->is_Register() && in_sig_bt[i] == T_LONG) {
1230 int slot = handle_index * VMRegImpl::slots_per_word + arg_save_area;
1231 int offset = slot * VMRegImpl::stack_slot_size;
1232 handle_index += 2;
1233 assert(handle_index <= stack_slots, "overflow");
1234 if (map != NULL) {
1235 __ movl(Address(rsp, offset), in_regs[i].first()->as_Register());
1236 if (in_regs[i].second()->is_Register()) {
1237 __ movl(Address(rsp, offset + 4), in_regs[i].second()->as_Register());
1238 }
1239 } else {
1240 __ movl(in_regs[i].first()->as_Register(), Address(rsp, offset));
1241 if (in_regs[i].second()->is_Register()) {
1242 __ movl(in_regs[i].second()->as_Register(), Address(rsp, offset + 4));
1243 }
1244 }
1245 }
1246 }
1247 // Save or restore single word registers
1248 for ( int i = 0; i < total_in_args; i++) {
1249 if (in_regs[i].first()->is_Register()) {
1250 int slot = handle_index++ * VMRegImpl::slots_per_word + arg_save_area;
1251 int offset = slot * VMRegImpl::stack_slot_size;
1252 assert(handle_index <= stack_slots, "overflow");
1253 if (in_sig_bt[i] == T_ARRAY && map != NULL) {
1254 map->set_oop(VMRegImpl::stack2reg(slot));;
1255 }
1257 // Value is in an input register pass we must flush it to the stack
1258 const Register reg = in_regs[i].first()->as_Register();
1259 switch (in_sig_bt[i]) {
1260 case T_ARRAY:
1261 if (map != NULL) {
1262 __ movptr(Address(rsp, offset), reg);
1263 } else {
1264 __ movptr(reg, Address(rsp, offset));
1265 }
1266 break;
1267 case T_BOOLEAN:
1268 case T_CHAR:
1269 case T_BYTE:
1270 case T_SHORT:
1271 case T_INT:
1272 if (map != NULL) {
1273 __ movl(Address(rsp, offset), reg);
1274 } else {
1275 __ movl(reg, Address(rsp, offset));
1276 }
1277 break;
1278 case T_OBJECT:
1279 default: ShouldNotReachHere();
1280 }
1281 } else if (in_regs[i].first()->is_XMMRegister()) {
1282 if (in_sig_bt[i] == T_FLOAT) {
1283 int slot = handle_index++ * VMRegImpl::slots_per_word + arg_save_area;
1284 int offset = slot * VMRegImpl::stack_slot_size;
1285 assert(handle_index <= stack_slots, "overflow");
1286 if (map != NULL) {
1287 __ movflt(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
1288 } else {
1289 __ movflt(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
1290 }
1291 }
1292 } else if (in_regs[i].first()->is_stack()) {
1293 if (in_sig_bt[i] == T_ARRAY && map != NULL) {
1294 int offset_in_older_frame = in_regs[i].first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1295 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + stack_slots));
1296 }
1297 }
1298 }
1299 }
1301 // Check GC_locker::needs_gc and enter the runtime if it's true. This
1302 // keeps a new JNI critical region from starting until a GC has been
1303 // forced. Save down any oops in registers and describe them in an
1304 // OopMap.
1305 static void check_needs_gc_for_critical_native(MacroAssembler* masm,
1306 Register thread,
1307 int stack_slots,
1308 int total_c_args,
1309 int total_in_args,
1310 int arg_save_area,
1311 OopMapSet* oop_maps,
1312 VMRegPair* in_regs,
1313 BasicType* in_sig_bt) {
1314 __ block_comment("check GC_locker::needs_gc");
1315 Label cont;
1316 __ cmp8(ExternalAddress((address)GC_locker::needs_gc_address()), false);
1317 __ jcc(Assembler::equal, cont);
1319 // Save down any incoming oops and call into the runtime to halt for a GC
1321 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1323 save_or_restore_arguments(masm, stack_slots, total_in_args,
1324 arg_save_area, map, in_regs, in_sig_bt);
1326 address the_pc = __ pc();
1327 oop_maps->add_gc_map( __ offset(), map);
1328 __ set_last_Java_frame(thread, rsp, noreg, the_pc);
1330 __ block_comment("block_for_jni_critical");
1331 __ push(thread);
1332 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::block_for_jni_critical)));
1333 __ increment(rsp, wordSize);
1335 __ get_thread(thread);
1336 __ reset_last_Java_frame(thread, false, true);
1338 save_or_restore_arguments(masm, stack_slots, total_in_args,
1339 arg_save_area, NULL, in_regs, in_sig_bt);
1341 __ bind(cont);
1342 #ifdef ASSERT
1343 if (StressCriticalJNINatives) {
1344 // Stress register saving
1345 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1346 save_or_restore_arguments(masm, stack_slots, total_in_args,
1347 arg_save_area, map, in_regs, in_sig_bt);
1348 // Destroy argument registers
1349 for (int i = 0; i < total_in_args - 1; i++) {
1350 if (in_regs[i].first()->is_Register()) {
1351 const Register reg = in_regs[i].first()->as_Register();
1352 __ xorptr(reg, reg);
1353 } else if (in_regs[i].first()->is_XMMRegister()) {
1354 __ xorpd(in_regs[i].first()->as_XMMRegister(), in_regs[i].first()->as_XMMRegister());
1355 } else if (in_regs[i].first()->is_FloatRegister()) {
1356 ShouldNotReachHere();
1357 } else if (in_regs[i].first()->is_stack()) {
1358 // Nothing to do
1359 } else {
1360 ShouldNotReachHere();
1361 }
1362 if (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_DOUBLE) {
1363 i++;
1364 }
1365 }
1367 save_or_restore_arguments(masm, stack_slots, total_in_args,
1368 arg_save_area, NULL, in_regs, in_sig_bt);
1369 }
1370 #endif
1371 }
1373 // Unpack an array argument into a pointer to the body and the length
1374 // if the array is non-null, otherwise pass 0 for both.
1375 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) {
1376 Register tmp_reg = rax;
1377 assert(!body_arg.first()->is_Register() || body_arg.first()->as_Register() != tmp_reg,
1378 "possible collision");
1379 assert(!length_arg.first()->is_Register() || length_arg.first()->as_Register() != tmp_reg,
1380 "possible collision");
1382 // Pass the length, ptr pair
1383 Label is_null, done;
1384 VMRegPair tmp(tmp_reg->as_VMReg());
1385 if (reg.first()->is_stack()) {
1386 // Load the arg up from the stack
1387 simple_move32(masm, reg, tmp);
1388 reg = tmp;
1389 }
1390 __ testptr(reg.first()->as_Register(), reg.first()->as_Register());
1391 __ jccb(Assembler::equal, is_null);
1392 __ lea(tmp_reg, Address(reg.first()->as_Register(), arrayOopDesc::base_offset_in_bytes(in_elem_type)));
1393 simple_move32(masm, tmp, body_arg);
1394 // load the length relative to the body.
1395 __ movl(tmp_reg, Address(tmp_reg, arrayOopDesc::length_offset_in_bytes() -
1396 arrayOopDesc::base_offset_in_bytes(in_elem_type)));
1397 simple_move32(masm, tmp, length_arg);
1398 __ jmpb(done);
1399 __ bind(is_null);
1400 // Pass zeros
1401 __ xorptr(tmp_reg, tmp_reg);
1402 simple_move32(masm, tmp, body_arg);
1403 simple_move32(masm, tmp, length_arg);
1404 __ bind(done);
1405 }
1407 static void verify_oop_args(MacroAssembler* masm,
1408 methodHandle method,
1409 const BasicType* sig_bt,
1410 const VMRegPair* regs) {
1411 Register temp_reg = rbx; // not part of any compiled calling seq
1412 if (VerifyOops) {
1413 for (int i = 0; i < method->size_of_parameters(); i++) {
1414 if (sig_bt[i] == T_OBJECT ||
1415 sig_bt[i] == T_ARRAY) {
1416 VMReg r = regs[i].first();
1417 assert(r->is_valid(), "bad oop arg");
1418 if (r->is_stack()) {
1419 __ movptr(temp_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1420 __ verify_oop(temp_reg);
1421 } else {
1422 __ verify_oop(r->as_Register());
1423 }
1424 }
1425 }
1426 }
1427 }
1429 static void gen_special_dispatch(MacroAssembler* masm,
1430 methodHandle method,
1431 const BasicType* sig_bt,
1432 const VMRegPair* regs) {
1433 verify_oop_args(masm, method, sig_bt, regs);
1434 vmIntrinsics::ID iid = method->intrinsic_id();
1436 // Now write the args into the outgoing interpreter space
1437 bool has_receiver = false;
1438 Register receiver_reg = noreg;
1439 int member_arg_pos = -1;
1440 Register member_reg = noreg;
1441 int ref_kind = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid);
1442 if (ref_kind != 0) {
1443 member_arg_pos = method->size_of_parameters() - 1; // trailing MemberName argument
1444 member_reg = rbx; // known to be free at this point
1445 has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind);
1446 } else if (iid == vmIntrinsics::_invokeBasic) {
1447 has_receiver = true;
1448 } else {
1449 fatal(err_msg_res("unexpected intrinsic id %d", iid));
1450 }
1452 if (member_reg != noreg) {
1453 // Load the member_arg into register, if necessary.
1454 SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs);
1455 VMReg r = regs[member_arg_pos].first();
1456 if (r->is_stack()) {
1457 __ movptr(member_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1458 } else {
1459 // no data motion is needed
1460 member_reg = r->as_Register();
1461 }
1462 }
1464 if (has_receiver) {
1465 // Make sure the receiver is loaded into a register.
1466 assert(method->size_of_parameters() > 0, "oob");
1467 assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object");
1468 VMReg r = regs[0].first();
1469 assert(r->is_valid(), "bad receiver arg");
1470 if (r->is_stack()) {
1471 // Porting note: This assumes that compiled calling conventions always
1472 // pass the receiver oop in a register. If this is not true on some
1473 // platform, pick a temp and load the receiver from stack.
1474 fatal("receiver always in a register");
1475 receiver_reg = rcx; // known to be free at this point
1476 __ movptr(receiver_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1477 } else {
1478 // no data motion is needed
1479 receiver_reg = r->as_Register();
1480 }
1481 }
1483 // Figure out which address we are really jumping to:
1484 MethodHandles::generate_method_handle_dispatch(masm, iid,
1485 receiver_reg, member_reg, /*for_compiler_entry:*/ true);
1486 }
1488 // ---------------------------------------------------------------------------
1489 // Generate a native wrapper for a given method. The method takes arguments
1490 // in the Java compiled code convention, marshals them to the native
1491 // convention (handlizes oops, etc), transitions to native, makes the call,
1492 // returns to java state (possibly blocking), unhandlizes any result and
1493 // returns.
1494 //
1495 // Critical native functions are a shorthand for the use of
1496 // GetPrimtiveArrayCritical and disallow the use of any other JNI
1497 // functions. The wrapper is expected to unpack the arguments before
1498 // passing them to the callee and perform checks before and after the
1499 // native call to ensure that they GC_locker
1500 // lock_critical/unlock_critical semantics are followed. Some other
1501 // parts of JNI setup are skipped like the tear down of the JNI handle
1502 // block and the check for pending exceptions it's impossible for them
1503 // to be thrown.
1504 //
1505 // They are roughly structured like this:
1506 // if (GC_locker::needs_gc())
1507 // SharedRuntime::block_for_jni_critical();
1508 // tranistion to thread_in_native
1509 // unpack arrray arguments and call native entry point
1510 // check for safepoint in progress
1511 // check if any thread suspend flags are set
1512 // call into JVM and possible unlock the JNI critical
1513 // if a GC was suppressed while in the critical native.
1514 // transition back to thread_in_Java
1515 // return to caller
1516 //
1517 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm,
1518 methodHandle method,
1519 int compile_id,
1520 BasicType* in_sig_bt,
1521 VMRegPair* in_regs,
1522 BasicType ret_type) {
1523 if (method->is_method_handle_intrinsic()) {
1524 vmIntrinsics::ID iid = method->intrinsic_id();
1525 intptr_t start = (intptr_t)__ pc();
1526 int vep_offset = ((intptr_t)__ pc()) - start;
1527 gen_special_dispatch(masm,
1528 method,
1529 in_sig_bt,
1530 in_regs);
1531 int frame_complete = ((intptr_t)__ pc()) - start; // not complete, period
1532 __ flush();
1533 int stack_slots = SharedRuntime::out_preserve_stack_slots(); // no out slots at all, actually
1534 return nmethod::new_native_nmethod(method,
1535 compile_id,
1536 masm->code(),
1537 vep_offset,
1538 frame_complete,
1539 stack_slots / VMRegImpl::slots_per_word,
1540 in_ByteSize(-1),
1541 in_ByteSize(-1),
1542 (OopMapSet*)NULL);
1543 }
1544 bool is_critical_native = true;
1545 address native_func = method->critical_native_function();
1546 if (native_func == NULL) {
1547 native_func = method->native_function();
1548 is_critical_native = false;
1549 }
1550 assert(native_func != NULL, "must have function");
1552 // An OopMap for lock (and class if static)
1553 OopMapSet *oop_maps = new OopMapSet();
1555 // We have received a description of where all the java arg are located
1556 // on entry to the wrapper. We need to convert these args to where
1557 // the jni function will expect them. To figure out where they go
1558 // we convert the java signature to a C signature by inserting
1559 // the hidden arguments as arg[0] and possibly arg[1] (static method)
1561 const int total_in_args = method->size_of_parameters();
1562 int total_c_args = total_in_args;
1563 if (!is_critical_native) {
1564 total_c_args += 1;
1565 if (method->is_static()) {
1566 total_c_args++;
1567 }
1568 } else {
1569 for (int i = 0; i < total_in_args; i++) {
1570 if (in_sig_bt[i] == T_ARRAY) {
1571 total_c_args++;
1572 }
1573 }
1574 }
1576 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
1577 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
1578 BasicType* in_elem_bt = NULL;
1580 int argc = 0;
1581 if (!is_critical_native) {
1582 out_sig_bt[argc++] = T_ADDRESS;
1583 if (method->is_static()) {
1584 out_sig_bt[argc++] = T_OBJECT;
1585 }
1587 for (int i = 0; i < total_in_args ; i++ ) {
1588 out_sig_bt[argc++] = in_sig_bt[i];
1589 }
1590 } else {
1591 Thread* THREAD = Thread::current();
1592 in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args);
1593 SignatureStream ss(method->signature());
1594 for (int i = 0; i < total_in_args ; i++ ) {
1595 if (in_sig_bt[i] == T_ARRAY) {
1596 // Arrays are passed as int, elem* pair
1597 out_sig_bt[argc++] = T_INT;
1598 out_sig_bt[argc++] = T_ADDRESS;
1599 Symbol* atype = ss.as_symbol(CHECK_NULL);
1600 const char* at = atype->as_C_string();
1601 if (strlen(at) == 2) {
1602 assert(at[0] == '[', "must be");
1603 switch (at[1]) {
1604 case 'B': in_elem_bt[i] = T_BYTE; break;
1605 case 'C': in_elem_bt[i] = T_CHAR; break;
1606 case 'D': in_elem_bt[i] = T_DOUBLE; break;
1607 case 'F': in_elem_bt[i] = T_FLOAT; break;
1608 case 'I': in_elem_bt[i] = T_INT; break;
1609 case 'J': in_elem_bt[i] = T_LONG; break;
1610 case 'S': in_elem_bt[i] = T_SHORT; break;
1611 case 'Z': in_elem_bt[i] = T_BOOLEAN; break;
1612 default: ShouldNotReachHere();
1613 }
1614 }
1615 } else {
1616 out_sig_bt[argc++] = in_sig_bt[i];
1617 in_elem_bt[i] = T_VOID;
1618 }
1619 if (in_sig_bt[i] != T_VOID) {
1620 assert(in_sig_bt[i] == ss.type(), "must match");
1621 ss.next();
1622 }
1623 }
1624 }
1626 // Now figure out where the args must be stored and how much stack space
1627 // they require.
1628 int out_arg_slots;
1629 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
1631 // Compute framesize for the wrapper. We need to handlize all oops in
1632 // registers a max of 2 on x86.
1634 // Calculate the total number of stack slots we will need.
1636 // First count the abi requirement plus all of the outgoing args
1637 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
1639 // Now the space for the inbound oop handle area
1640 int total_save_slots = 2 * VMRegImpl::slots_per_word; // 2 arguments passed in registers
1641 if (is_critical_native) {
1642 // Critical natives may have to call out so they need a save area
1643 // for register arguments.
1644 int double_slots = 0;
1645 int single_slots = 0;
1646 for ( int i = 0; i < total_in_args; i++) {
1647 if (in_regs[i].first()->is_Register()) {
1648 const Register reg = in_regs[i].first()->as_Register();
1649 switch (in_sig_bt[i]) {
1650 case T_ARRAY: // critical array (uses 2 slots on LP64)
1651 case T_BOOLEAN:
1652 case T_BYTE:
1653 case T_SHORT:
1654 case T_CHAR:
1655 case T_INT: single_slots++; break;
1656 case T_LONG: double_slots++; break;
1657 default: ShouldNotReachHere();
1658 }
1659 } else if (in_regs[i].first()->is_XMMRegister()) {
1660 switch (in_sig_bt[i]) {
1661 case T_FLOAT: single_slots++; break;
1662 case T_DOUBLE: double_slots++; break;
1663 default: ShouldNotReachHere();
1664 }
1665 } else if (in_regs[i].first()->is_FloatRegister()) {
1666 ShouldNotReachHere();
1667 }
1668 }
1669 total_save_slots = double_slots * 2 + single_slots;
1670 // align the save area
1671 if (double_slots != 0) {
1672 stack_slots = round_to(stack_slots, 2);
1673 }
1674 }
1676 int oop_handle_offset = stack_slots;
1677 stack_slots += total_save_slots;
1679 // Now any space we need for handlizing a klass if static method
1681 int klass_slot_offset = 0;
1682 int klass_offset = -1;
1683 int lock_slot_offset = 0;
1684 bool is_static = false;
1686 if (method->is_static()) {
1687 klass_slot_offset = stack_slots;
1688 stack_slots += VMRegImpl::slots_per_word;
1689 klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
1690 is_static = true;
1691 }
1693 // Plus a lock if needed
1695 if (method->is_synchronized()) {
1696 lock_slot_offset = stack_slots;
1697 stack_slots += VMRegImpl::slots_per_word;
1698 }
1700 // Now a place (+2) to save return values or temp during shuffling
1701 // + 2 for return address (which we own) and saved rbp,
1702 stack_slots += 4;
1704 // Ok The space we have allocated will look like:
1705 //
1706 //
1707 // FP-> | |
1708 // |---------------------|
1709 // | 2 slots for moves |
1710 // |---------------------|
1711 // | lock box (if sync) |
1712 // |---------------------| <- lock_slot_offset (-lock_slot_rbp_offset)
1713 // | klass (if static) |
1714 // |---------------------| <- klass_slot_offset
1715 // | oopHandle area |
1716 // |---------------------| <- oop_handle_offset (a max of 2 registers)
1717 // | outbound memory |
1718 // | based arguments |
1719 // | |
1720 // |---------------------|
1721 // | |
1722 // SP-> | out_preserved_slots |
1723 //
1724 //
1725 // ****************************************************************************
1726 // WARNING - on Windows Java Natives use pascal calling convention and pop the
1727 // arguments off of the stack after the jni call. Before the call we can use
1728 // instructions that are SP relative. After the jni call we switch to FP
1729 // relative instructions instead of re-adjusting the stack on windows.
1730 // ****************************************************************************
1733 // Now compute actual number of stack words we need rounding to make
1734 // stack properly aligned.
1735 stack_slots = round_to(stack_slots, StackAlignmentInSlots);
1737 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
1739 intptr_t start = (intptr_t)__ pc();
1741 // First thing make an ic check to see if we should even be here
1743 // We are free to use all registers as temps without saving them and
1744 // restoring them except rbp. rbp is the only callee save register
1745 // as far as the interpreter and the compiler(s) are concerned.
1748 const Register ic_reg = rax;
1749 const Register receiver = rcx;
1750 Label hit;
1751 Label exception_pending;
1753 __ verify_oop(receiver);
1754 __ cmpptr(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
1755 __ jcc(Assembler::equal, hit);
1757 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1759 // verified entry must be aligned for code patching.
1760 // and the first 5 bytes must be in the same cache line
1761 // if we align at 8 then we will be sure 5 bytes are in the same line
1762 __ align(8);
1764 __ bind(hit);
1766 int vep_offset = ((intptr_t)__ pc()) - start;
1768 #ifdef COMPILER1
1769 if (InlineObjectHash && method->intrinsic_id() == vmIntrinsics::_hashCode) {
1770 // Object.hashCode can pull the hashCode from the header word
1771 // instead of doing a full VM transition once it's been computed.
1772 // Since hashCode is usually polymorphic at call sites we can't do
1773 // this optimization at the call site without a lot of work.
1774 Label slowCase;
1775 Register receiver = rcx;
1776 Register result = rax;
1777 __ movptr(result, Address(receiver, oopDesc::mark_offset_in_bytes()));
1779 // check if locked
1780 __ testptr(result, markOopDesc::unlocked_value);
1781 __ jcc (Assembler::zero, slowCase);
1783 if (UseBiasedLocking) {
1784 // Check if biased and fall through to runtime if so
1785 __ testptr(result, markOopDesc::biased_lock_bit_in_place);
1786 __ jcc (Assembler::notZero, slowCase);
1787 }
1789 // get hash
1790 __ andptr(result, markOopDesc::hash_mask_in_place);
1791 // test if hashCode exists
1792 __ jcc (Assembler::zero, slowCase);
1793 __ shrptr(result, markOopDesc::hash_shift);
1794 __ ret(0);
1795 __ bind (slowCase);
1796 }
1797 #endif // COMPILER1
1799 // The instruction at the verified entry point must be 5 bytes or longer
1800 // because it can be patched on the fly by make_non_entrant. The stack bang
1801 // instruction fits that requirement.
1803 // Generate stack overflow check
1805 if (UseStackBanging) {
1806 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
1807 } else {
1808 // need a 5 byte instruction to allow MT safe patching to non-entrant
1809 __ fat_nop();
1810 }
1812 // Generate a new frame for the wrapper.
1813 __ enter();
1814 // -2 because return address is already present and so is saved rbp
1815 __ subptr(rsp, stack_size - 2*wordSize);
1817 // Frame is now completed as far as size and linkage.
1818 int frame_complete = ((intptr_t)__ pc()) - start;
1820 if (UseRTMLocking) {
1821 // Abort RTM transaction before calling JNI
1822 // because critical section will be large and will be
1823 // aborted anyway. Also nmethod could be deoptimized.
1824 __ xabort(0);
1825 }
1827 // Calculate the difference between rsp and rbp,. We need to know it
1828 // after the native call because on windows Java Natives will pop
1829 // the arguments and it is painful to do rsp relative addressing
1830 // in a platform independent way. So after the call we switch to
1831 // rbp, relative addressing.
1833 int fp_adjustment = stack_size - 2*wordSize;
1835 #ifdef COMPILER2
1836 // C2 may leave the stack dirty if not in SSE2+ mode
1837 if (UseSSE >= 2) {
1838 __ verify_FPU(0, "c2i transition should have clean FPU stack");
1839 } else {
1840 __ empty_FPU_stack();
1841 }
1842 #endif /* COMPILER2 */
1844 // Compute the rbp, offset for any slots used after the jni call
1846 int lock_slot_rbp_offset = (lock_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment;
1848 // We use rdi as a thread pointer because it is callee save and
1849 // if we load it once it is usable thru the entire wrapper
1850 const Register thread = rdi;
1852 // We use rsi as the oop handle for the receiver/klass
1853 // It is callee save so it survives the call to native
1855 const Register oop_handle_reg = rsi;
1857 __ get_thread(thread);
1859 if (is_critical_native) {
1860 check_needs_gc_for_critical_native(masm, thread, stack_slots, total_c_args, total_in_args,
1861 oop_handle_offset, oop_maps, in_regs, in_sig_bt);
1862 }
1864 //
1865 // We immediately shuffle the arguments so that any vm call we have to
1866 // make from here on out (sync slow path, jvmti, etc.) we will have
1867 // captured the oops from our caller and have a valid oopMap for
1868 // them.
1870 // -----------------
1871 // The Grand Shuffle
1872 //
1873 // Natives require 1 or 2 extra arguments over the normal ones: the JNIEnv*
1874 // and, if static, the class mirror instead of a receiver. This pretty much
1875 // guarantees that register layout will not match (and x86 doesn't use reg
1876 // parms though amd does). Since the native abi doesn't use register args
1877 // and the java conventions does we don't have to worry about collisions.
1878 // All of our moved are reg->stack or stack->stack.
1879 // We ignore the extra arguments during the shuffle and handle them at the
1880 // last moment. The shuffle is described by the two calling convention
1881 // vectors we have in our possession. We simply walk the java vector to
1882 // get the source locations and the c vector to get the destinations.
1884 int c_arg = is_critical_native ? 0 : (method->is_static() ? 2 : 1 );
1886 // Record rsp-based slot for receiver on stack for non-static methods
1887 int receiver_offset = -1;
1889 // This is a trick. We double the stack slots so we can claim
1890 // the oops in the caller's frame. Since we are sure to have
1891 // more args than the caller doubling is enough to make
1892 // sure we can capture all the incoming oop args from the
1893 // caller.
1894 //
1895 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1897 // Mark location of rbp,
1898 // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, rbp->as_VMReg());
1900 // We know that we only have args in at most two integer registers (rcx, rdx). So rax, rbx
1901 // Are free to temporaries if we have to do stack to steck moves.
1902 // All inbound args are referenced based on rbp, and all outbound args via rsp.
1904 for (int i = 0; i < total_in_args ; i++, c_arg++ ) {
1905 switch (in_sig_bt[i]) {
1906 case T_ARRAY:
1907 if (is_critical_native) {
1908 unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg + 1], out_regs[c_arg]);
1909 c_arg++;
1910 break;
1911 }
1912 case T_OBJECT:
1913 assert(!is_critical_native, "no oop arguments");
1914 object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
1915 ((i == 0) && (!is_static)),
1916 &receiver_offset);
1917 break;
1918 case T_VOID:
1919 break;
1921 case T_FLOAT:
1922 float_move(masm, in_regs[i], out_regs[c_arg]);
1923 break;
1925 case T_DOUBLE:
1926 assert( i + 1 < total_in_args &&
1927 in_sig_bt[i + 1] == T_VOID &&
1928 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
1929 double_move(masm, in_regs[i], out_regs[c_arg]);
1930 break;
1932 case T_LONG :
1933 long_move(masm, in_regs[i], out_regs[c_arg]);
1934 break;
1936 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
1938 default:
1939 simple_move32(masm, in_regs[i], out_regs[c_arg]);
1940 }
1941 }
1943 // Pre-load a static method's oop into rsi. Used both by locking code and
1944 // the normal JNI call code.
1945 if (method->is_static() && !is_critical_native) {
1947 // load opp into a register
1948 __ movoop(oop_handle_reg, JNIHandles::make_local(method->method_holder()->java_mirror()));
1950 // Now handlize the static class mirror it's known not-null.
1951 __ movptr(Address(rsp, klass_offset), oop_handle_reg);
1952 map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
1954 // Now get the handle
1955 __ lea(oop_handle_reg, Address(rsp, klass_offset));
1956 // store the klass handle as second argument
1957 __ movptr(Address(rsp, wordSize), oop_handle_reg);
1958 }
1960 // Change state to native (we save the return address in the thread, since it might not
1961 // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
1962 // points into the right code segment. It does not have to be the correct return pc.
1963 // We use the same pc/oopMap repeatedly when we call out
1965 intptr_t the_pc = (intptr_t) __ pc();
1966 oop_maps->add_gc_map(the_pc - start, map);
1968 __ set_last_Java_frame(thread, rsp, noreg, (address)the_pc);
1971 // We have all of the arguments setup at this point. We must not touch any register
1972 // argument registers at this point (what if we save/restore them there are no oop?
1974 {
1975 SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
1976 __ mov_metadata(rax, method());
1977 __ call_VM_leaf(
1978 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1979 thread, rax);
1980 }
1982 // RedefineClasses() tracing support for obsolete method entry
1983 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
1984 __ mov_metadata(rax, method());
1985 __ call_VM_leaf(
1986 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1987 thread, rax);
1988 }
1990 // These are register definitions we need for locking/unlocking
1991 const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
1992 const Register obj_reg = rcx; // Will contain the oop
1993 const Register lock_reg = rdx; // Address of compiler lock object (BasicLock)
1995 Label slow_path_lock;
1996 Label lock_done;
1998 // Lock a synchronized method
1999 if (method->is_synchronized()) {
2000 assert(!is_critical_native, "unhandled");
2003 const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();
2005 // Get the handle (the 2nd argument)
2006 __ movptr(oop_handle_reg, Address(rsp, wordSize));
2008 // Get address of the box
2010 __ lea(lock_reg, Address(rbp, lock_slot_rbp_offset));
2012 // Load the oop from the handle
2013 __ movptr(obj_reg, Address(oop_handle_reg, 0));
2015 if (UseBiasedLocking) {
2016 // Note that oop_handle_reg is trashed during this call
2017 __ biased_locking_enter(lock_reg, obj_reg, swap_reg, oop_handle_reg, false, lock_done, &slow_path_lock);
2018 }
2020 // Load immediate 1 into swap_reg %rax,
2021 __ movptr(swap_reg, 1);
2023 // Load (object->mark() | 1) into swap_reg %rax,
2024 __ orptr(swap_reg, Address(obj_reg, 0));
2026 // Save (object->mark() | 1) into BasicLock's displaced header
2027 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
2029 if (os::is_MP()) {
2030 __ lock();
2031 }
2033 // src -> dest iff dest == rax, else rax, <- dest
2034 // *obj_reg = lock_reg iff *obj_reg == rax, else rax, = *(obj_reg)
2035 __ cmpxchgptr(lock_reg, Address(obj_reg, 0));
2036 __ jcc(Assembler::equal, lock_done);
2038 // Test if the oopMark is an obvious stack pointer, i.e.,
2039 // 1) (mark & 3) == 0, and
2040 // 2) rsp <= mark < mark + os::pagesize()
2041 // These 3 tests can be done by evaluating the following
2042 // expression: ((mark - rsp) & (3 - os::vm_page_size())),
2043 // assuming both stack pointer and pagesize have their
2044 // least significant 2 bits clear.
2045 // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg
2047 __ subptr(swap_reg, rsp);
2048 __ andptr(swap_reg, 3 - os::vm_page_size());
2050 // Save the test result, for recursive case, the result is zero
2051 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
2052 __ jcc(Assembler::notEqual, slow_path_lock);
2053 // Slow path will re-enter here
2054 __ bind(lock_done);
2056 if (UseBiasedLocking) {
2057 // Re-fetch oop_handle_reg as we trashed it above
2058 __ movptr(oop_handle_reg, Address(rsp, wordSize));
2059 }
2060 }
2063 // Finally just about ready to make the JNI call
2066 // get JNIEnv* which is first argument to native
2067 if (!is_critical_native) {
2068 __ lea(rdx, Address(thread, in_bytes(JavaThread::jni_environment_offset())));
2069 __ movptr(Address(rsp, 0), rdx);
2070 }
2072 // Now set thread in native
2073 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native);
2075 __ call(RuntimeAddress(native_func));
2077 // Verify or restore cpu control state after JNI call
2078 __ restore_cpu_control_state_after_jni();
2080 // WARNING - on Windows Java Natives use pascal calling convention and pop the
2081 // arguments off of the stack. We could just re-adjust the stack pointer here
2082 // and continue to do SP relative addressing but we instead switch to FP
2083 // relative addressing.
2085 // Unpack native results.
2086 switch (ret_type) {
2087 case T_BOOLEAN: __ c2bool(rax); break;
2088 case T_CHAR : __ andptr(rax, 0xFFFF); break;
2089 case T_BYTE : __ sign_extend_byte (rax); break;
2090 case T_SHORT : __ sign_extend_short(rax); break;
2091 case T_INT : /* nothing to do */ break;
2092 case T_DOUBLE :
2093 case T_FLOAT :
2094 // Result is in st0 we'll save as needed
2095 break;
2096 case T_ARRAY: // Really a handle
2097 case T_OBJECT: // Really a handle
2098 break; // can't de-handlize until after safepoint check
2099 case T_VOID: break;
2100 case T_LONG: break;
2101 default : ShouldNotReachHere();
2102 }
2104 // Switch thread to "native transition" state before reading the synchronization state.
2105 // This additional state is necessary because reading and testing the synchronization
2106 // state is not atomic w.r.t. GC, as this scenario demonstrates:
2107 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
2108 // VM thread changes sync state to synchronizing and suspends threads for GC.
2109 // Thread A is resumed to finish this native method, but doesn't block here since it
2110 // didn't see any synchronization is progress, and escapes.
2111 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
2113 if(os::is_MP()) {
2114 if (UseMembar) {
2115 // Force this write out before the read below
2116 __ membar(Assembler::Membar_mask_bits(
2117 Assembler::LoadLoad | Assembler::LoadStore |
2118 Assembler::StoreLoad | Assembler::StoreStore));
2119 } else {
2120 // Write serialization page so VM thread can do a pseudo remote membar.
2121 // We use the current thread pointer to calculate a thread specific
2122 // offset to write to within the page. This minimizes bus traffic
2123 // due to cache line collision.
2124 __ serialize_memory(thread, rcx);
2125 }
2126 }
2128 if (AlwaysRestoreFPU) {
2129 // Make sure the control word is correct.
2130 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
2131 }
2133 Label after_transition;
2135 // check for safepoint operation in progress and/or pending suspend requests
2136 { Label Continue;
2138 __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
2139 SafepointSynchronize::_not_synchronized);
2141 Label L;
2142 __ jcc(Assembler::notEqual, L);
2143 __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0);
2144 __ jcc(Assembler::equal, Continue);
2145 __ bind(L);
2147 // Don't use call_VM as it will see a possible pending exception and forward it
2148 // and never return here preventing us from clearing _last_native_pc down below.
2149 // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
2150 // preserved and correspond to the bcp/locals pointers. So we do a runtime call
2151 // by hand.
2152 //
2153 save_native_result(masm, ret_type, stack_slots);
2154 __ push(thread);
2155 if (!is_critical_native) {
2156 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address,
2157 JavaThread::check_special_condition_for_native_trans)));
2158 } else {
2159 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address,
2160 JavaThread::check_special_condition_for_native_trans_and_transition)));
2161 }
2162 __ increment(rsp, wordSize);
2163 // Restore any method result value
2164 restore_native_result(masm, ret_type, stack_slots);
2166 if (is_critical_native) {
2167 // The call above performed the transition to thread_in_Java so
2168 // skip the transition logic below.
2169 __ jmpb(after_transition);
2170 }
2172 __ bind(Continue);
2173 }
2175 // change thread state
2176 __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java);
2177 __ bind(after_transition);
2179 Label reguard;
2180 Label reguard_done;
2181 __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
2182 __ jcc(Assembler::equal, reguard);
2184 // slow path reguard re-enters here
2185 __ bind(reguard_done);
2187 // Handle possible exception (will unlock if necessary)
2189 // native result if any is live
2191 // Unlock
2192 Label slow_path_unlock;
2193 Label unlock_done;
2194 if (method->is_synchronized()) {
2196 Label done;
2198 // Get locked oop from the handle we passed to jni
2199 __ movptr(obj_reg, Address(oop_handle_reg, 0));
2201 if (UseBiasedLocking) {
2202 __ biased_locking_exit(obj_reg, rbx, done);
2203 }
2205 // Simple recursive lock?
2207 __ cmpptr(Address(rbp, lock_slot_rbp_offset), (int32_t)NULL_WORD);
2208 __ jcc(Assembler::equal, done);
2210 // Must save rax, if if it is live now because cmpxchg must use it
2211 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
2212 save_native_result(masm, ret_type, stack_slots);
2213 }
2215 // get old displaced header
2216 __ movptr(rbx, Address(rbp, lock_slot_rbp_offset));
2218 // get address of the stack lock
2219 __ lea(rax, Address(rbp, lock_slot_rbp_offset));
2221 // Atomic swap old header if oop still contains the stack lock
2222 if (os::is_MP()) {
2223 __ lock();
2224 }
2226 // src -> dest iff dest == rax, else rax, <- dest
2227 // *obj_reg = rbx, iff *obj_reg == rax, else rax, = *(obj_reg)
2228 __ cmpxchgptr(rbx, Address(obj_reg, 0));
2229 __ jcc(Assembler::notEqual, slow_path_unlock);
2231 // slow path re-enters here
2232 __ bind(unlock_done);
2233 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
2234 restore_native_result(masm, ret_type, stack_slots);
2235 }
2237 __ bind(done);
2239 }
2241 {
2242 SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0);
2243 // Tell dtrace about this method exit
2244 save_native_result(masm, ret_type, stack_slots);
2245 __ mov_metadata(rax, method());
2246 __ call_VM_leaf(
2247 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
2248 thread, rax);
2249 restore_native_result(masm, ret_type, stack_slots);
2250 }
2252 // We can finally stop using that last_Java_frame we setup ages ago
2254 __ reset_last_Java_frame(thread, false, true);
2256 // Unpack oop result
2257 if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
2258 Label L;
2259 __ cmpptr(rax, (int32_t)NULL_WORD);
2260 __ jcc(Assembler::equal, L);
2261 __ movptr(rax, Address(rax, 0));
2262 __ bind(L);
2263 __ verify_oop(rax);
2264 }
2266 if (!is_critical_native) {
2267 // reset handle block
2268 __ movptr(rcx, Address(thread, JavaThread::active_handles_offset()));
2269 __ movl(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), NULL_WORD);
2271 // Any exception pending?
2272 __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
2273 __ jcc(Assembler::notEqual, exception_pending);
2274 }
2276 // no exception, we're almost done
2278 // check that only result value is on FPU stack
2279 __ verify_FPU(ret_type == T_FLOAT || ret_type == T_DOUBLE ? 1 : 0, "native_wrapper normal exit");
2281 // Fixup floating pointer results so that result looks like a return from a compiled method
2282 if (ret_type == T_FLOAT) {
2283 if (UseSSE >= 1) {
2284 // Pop st0 and store as float and reload into xmm register
2285 __ fstp_s(Address(rbp, -4));
2286 __ movflt(xmm0, Address(rbp, -4));
2287 }
2288 } else if (ret_type == T_DOUBLE) {
2289 if (UseSSE >= 2) {
2290 // Pop st0 and store as double and reload into xmm register
2291 __ fstp_d(Address(rbp, -8));
2292 __ movdbl(xmm0, Address(rbp, -8));
2293 }
2294 }
2296 // Return
2298 __ leave();
2299 __ ret(0);
2301 // Unexpected paths are out of line and go here
2303 // Slow path locking & unlocking
2304 if (method->is_synchronized()) {
2306 // BEGIN Slow path lock
2308 __ bind(slow_path_lock);
2310 // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
2311 // args are (oop obj, BasicLock* lock, JavaThread* thread)
2312 __ push(thread);
2313 __ push(lock_reg);
2314 __ push(obj_reg);
2315 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C)));
2316 __ addptr(rsp, 3*wordSize);
2318 #ifdef ASSERT
2319 { Label L;
2320 __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
2321 __ jcc(Assembler::equal, L);
2322 __ stop("no pending exception allowed on exit from monitorenter");
2323 __ bind(L);
2324 }
2325 #endif
2326 __ jmp(lock_done);
2328 // END Slow path lock
2330 // BEGIN Slow path unlock
2331 __ bind(slow_path_unlock);
2333 // Slow path unlock
2335 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
2336 save_native_result(masm, ret_type, stack_slots);
2337 }
2338 // Save pending exception around call to VM (which contains an EXCEPTION_MARK)
2340 __ pushptr(Address(thread, in_bytes(Thread::pending_exception_offset())));
2341 __ movptr(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD);
2344 // should be a peal
2345 // +wordSize because of the push above
2346 __ lea(rax, Address(rbp, lock_slot_rbp_offset));
2347 __ push(rax);
2349 __ push(obj_reg);
2350 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
2351 __ addptr(rsp, 2*wordSize);
2352 #ifdef ASSERT
2353 {
2354 Label L;
2355 __ cmpptr(Address(thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
2356 __ jcc(Assembler::equal, L);
2357 __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
2358 __ bind(L);
2359 }
2360 #endif /* ASSERT */
2362 __ popptr(Address(thread, in_bytes(Thread::pending_exception_offset())));
2364 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
2365 restore_native_result(masm, ret_type, stack_slots);
2366 }
2367 __ jmp(unlock_done);
2368 // END Slow path unlock
2370 }
2372 // SLOW PATH Reguard the stack if needed
2374 __ bind(reguard);
2375 save_native_result(masm, ret_type, stack_slots);
2376 {
2377 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
2378 }
2379 restore_native_result(masm, ret_type, stack_slots);
2380 __ jmp(reguard_done);
2383 // BEGIN EXCEPTION PROCESSING
2385 if (!is_critical_native) {
2386 // Forward the exception
2387 __ bind(exception_pending);
2389 // remove possible return value from FPU register stack
2390 __ empty_FPU_stack();
2392 // pop our frame
2393 __ leave();
2394 // and forward the exception
2395 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
2396 }
2398 __ flush();
2400 nmethod *nm = nmethod::new_native_nmethod(method,
2401 compile_id,
2402 masm->code(),
2403 vep_offset,
2404 frame_complete,
2405 stack_slots / VMRegImpl::slots_per_word,
2406 (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
2407 in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
2408 oop_maps);
2410 if (is_critical_native) {
2411 nm->set_lazy_critical_native(true);
2412 }
2414 return nm;
2416 }
2418 #ifdef HAVE_DTRACE_H
2419 // ---------------------------------------------------------------------------
2420 // Generate a dtrace nmethod for a given signature. The method takes arguments
2421 // in the Java compiled code convention, marshals them to the native
2422 // abi and then leaves nops at the position you would expect to call a native
2423 // function. When the probe is enabled the nops are replaced with a trap
2424 // instruction that dtrace inserts and the trace will cause a notification
2425 // to dtrace.
2426 //
2427 // The probes are only able to take primitive types and java/lang/String as
2428 // arguments. No other java types are allowed. Strings are converted to utf8
2429 // strings so that from dtrace point of view java strings are converted to C
2430 // strings. There is an arbitrary fixed limit on the total space that a method
2431 // can use for converting the strings. (256 chars per string in the signature).
2432 // So any java string larger then this is truncated.
2434 nmethod *SharedRuntime::generate_dtrace_nmethod(
2435 MacroAssembler *masm, methodHandle method) {
2437 // generate_dtrace_nmethod is guarded by a mutex so we are sure to
2438 // be single threaded in this method.
2439 assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");
2441 // Fill in the signature array, for the calling-convention call.
2442 int total_args_passed = method->size_of_parameters();
2444 BasicType* in_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
2445 VMRegPair *in_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);
2447 // The signature we are going to use for the trap that dtrace will see
2448 // java/lang/String is converted. We drop "this" and any other object
2449 // is converted to NULL. (A one-slot java/lang/Long object reference
2450 // is converted to a two-slot long, which is why we double the allocation).
2451 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
2452 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);
2454 int i=0;
2455 int total_strings = 0;
2456 int first_arg_to_pass = 0;
2457 int total_c_args = 0;
2459 if( !method->is_static() ) { // Pass in receiver first
2460 in_sig_bt[i++] = T_OBJECT;
2461 first_arg_to_pass = 1;
2462 }
2464 // We need to convert the java args to where a native (non-jni) function
2465 // would expect them. To figure out where they go we convert the java
2466 // signature to a C signature.
2468 SignatureStream ss(method->signature());
2469 for ( ; !ss.at_return_type(); ss.next()) {
2470 BasicType bt = ss.type();
2471 in_sig_bt[i++] = bt; // Collect remaining bits of signature
2472 out_sig_bt[total_c_args++] = bt;
2473 if( bt == T_OBJECT) {
2474 Symbol* s = ss.as_symbol_or_null(); // symbol is created
2475 if (s == vmSymbols::java_lang_String()) {
2476 total_strings++;
2477 out_sig_bt[total_c_args-1] = T_ADDRESS;
2478 } else if (s == vmSymbols::java_lang_Boolean() ||
2479 s == vmSymbols::java_lang_Character() ||
2480 s == vmSymbols::java_lang_Byte() ||
2481 s == vmSymbols::java_lang_Short() ||
2482 s == vmSymbols::java_lang_Integer() ||
2483 s == vmSymbols::java_lang_Float()) {
2484 out_sig_bt[total_c_args-1] = T_INT;
2485 } else if (s == vmSymbols::java_lang_Long() ||
2486 s == vmSymbols::java_lang_Double()) {
2487 out_sig_bt[total_c_args-1] = T_LONG;
2488 out_sig_bt[total_c_args++] = T_VOID;
2489 }
2490 } else if ( bt == T_LONG || bt == T_DOUBLE ) {
2491 in_sig_bt[i++] = T_VOID; // Longs & doubles take 2 Java slots
2492 out_sig_bt[total_c_args++] = T_VOID;
2493 }
2494 }
2496 assert(i==total_args_passed, "validly parsed signature");
2498 // Now get the compiled-Java layout as input arguments
2499 int comp_args_on_stack;
2500 comp_args_on_stack = SharedRuntime::java_calling_convention(
2501 in_sig_bt, in_regs, total_args_passed, false);
2503 // Now figure out where the args must be stored and how much stack space
2504 // they require (neglecting out_preserve_stack_slots).
2506 int out_arg_slots;
2507 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
2509 // Calculate the total number of stack slots we will need.
2511 // First count the abi requirement plus all of the outgoing args
2512 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
2514 // Now space for the string(s) we must convert
2516 int* string_locs = NEW_RESOURCE_ARRAY(int, total_strings + 1);
2517 for (i = 0; i < total_strings ; i++) {
2518 string_locs[i] = stack_slots;
2519 stack_slots += max_dtrace_string_size / VMRegImpl::stack_slot_size;
2520 }
2522 // + 2 for return address (which we own) and saved rbp,
2524 stack_slots += 2;
2526 // Ok The space we have allocated will look like:
2527 //
2528 //
2529 // FP-> | |
2530 // |---------------------|
2531 // | string[n] |
2532 // |---------------------| <- string_locs[n]
2533 // | string[n-1] |
2534 // |---------------------| <- string_locs[n-1]
2535 // | ... |
2536 // | ... |
2537 // |---------------------| <- string_locs[1]
2538 // | string[0] |
2539 // |---------------------| <- string_locs[0]
2540 // | outbound memory |
2541 // | based arguments |
2542 // | |
2543 // |---------------------|
2544 // | |
2545 // SP-> | out_preserved_slots |
2546 //
2547 //
2549 // Now compute actual number of stack words we need rounding to make
2550 // stack properly aligned.
2551 stack_slots = round_to(stack_slots, 2 * VMRegImpl::slots_per_word);
2553 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
2555 intptr_t start = (intptr_t)__ pc();
2557 // First thing make an ic check to see if we should even be here
2559 // We are free to use all registers as temps without saving them and
2560 // restoring them except rbp. rbp, is the only callee save register
2561 // as far as the interpreter and the compiler(s) are concerned.
2563 const Register ic_reg = rax;
2564 const Register receiver = rcx;
2565 Label hit;
2566 Label exception_pending;
2569 __ verify_oop(receiver);
2570 __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
2571 __ jcc(Assembler::equal, hit);
2573 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
2575 // verified entry must be aligned for code patching.
2576 // and the first 5 bytes must be in the same cache line
2577 // if we align at 8 then we will be sure 5 bytes are in the same line
2578 __ align(8);
2580 __ bind(hit);
2582 int vep_offset = ((intptr_t)__ pc()) - start;
2585 // The instruction at the verified entry point must be 5 bytes or longer
2586 // because it can be patched on the fly by make_non_entrant. The stack bang
2587 // instruction fits that requirement.
2589 // Generate stack overflow check
2592 if (UseStackBanging) {
2593 if (stack_size <= StackShadowPages*os::vm_page_size()) {
2594 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
2595 } else {
2596 __ movl(rax, stack_size);
2597 __ bang_stack_size(rax, rbx);
2598 }
2599 } else {
2600 // need a 5 byte instruction to allow MT safe patching to non-entrant
2601 __ fat_nop();
2602 }
2604 assert(((int)__ pc() - start - vep_offset) >= 5,
2605 "valid size for make_non_entrant");
2607 // Generate a new frame for the wrapper.
2608 __ enter();
2610 // -2 because return address is already present and so is saved rbp,
2611 if (stack_size - 2*wordSize != 0) {
2612 __ subl(rsp, stack_size - 2*wordSize);
2613 }
2615 // Frame is now completed as far a size and linkage.
2617 int frame_complete = ((intptr_t)__ pc()) - start;
2619 // First thing we do store all the args as if we are doing the call.
2620 // Since the C calling convention is stack based that ensures that
2621 // all the Java register args are stored before we need to convert any
2622 // string we might have.
2624 int sid = 0;
2625 int c_arg, j_arg;
2626 int string_reg = 0;
2628 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2629 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2631 VMRegPair src = in_regs[j_arg];
2632 VMRegPair dst = out_regs[c_arg];
2633 assert(dst.first()->is_stack() || in_sig_bt[j_arg] == T_VOID,
2634 "stack based abi assumed");
2636 switch (in_sig_bt[j_arg]) {
2638 case T_ARRAY:
2639 case T_OBJECT:
2640 if (out_sig_bt[c_arg] == T_ADDRESS) {
2641 // Any register based arg for a java string after the first
2642 // will be destroyed by the call to get_utf so we store
2643 // the original value in the location the utf string address
2644 // will eventually be stored.
2645 if (src.first()->is_reg()) {
2646 if (string_reg++ != 0) {
2647 simple_move32(masm, src, dst);
2648 }
2649 }
2650 } else if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
2651 // need to unbox a one-word value
2652 Register in_reg = rax;
2653 if ( src.first()->is_reg() ) {
2654 in_reg = src.first()->as_Register();
2655 } else {
2656 simple_move32(masm, src, in_reg->as_VMReg());
2657 }
2658 Label skipUnbox;
2659 __ movl(Address(rsp, reg2offset_out(dst.first())), NULL_WORD);
2660 if ( out_sig_bt[c_arg] == T_LONG ) {
2661 __ movl(Address(rsp, reg2offset_out(dst.second())), NULL_WORD);
2662 }
2663 __ testl(in_reg, in_reg);
2664 __ jcc(Assembler::zero, skipUnbox);
2665 assert(dst.first()->is_stack() &&
2666 (!dst.second()->is_valid() || dst.second()->is_stack()),
2667 "value(s) must go into stack slots");
2669 BasicType bt = out_sig_bt[c_arg];
2670 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
2671 if ( bt == T_LONG ) {
2672 __ movl(rbx, Address(in_reg,
2673 box_offset + VMRegImpl::stack_slot_size));
2674 __ movl(Address(rsp, reg2offset_out(dst.second())), rbx);
2675 }
2676 __ movl(in_reg, Address(in_reg, box_offset));
2677 __ movl(Address(rsp, reg2offset_out(dst.first())), in_reg);
2678 __ bind(skipUnbox);
2679 } else {
2680 // Convert the arg to NULL
2681 __ movl(Address(rsp, reg2offset_out(dst.first())), NULL_WORD);
2682 }
2683 if (out_sig_bt[c_arg] == T_LONG) {
2684 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2685 ++c_arg; // Move over the T_VOID To keep the loop indices in sync
2686 }
2687 break;
2689 case T_VOID:
2690 break;
2692 case T_FLOAT:
2693 float_move(masm, src, dst);
2694 break;
2696 case T_DOUBLE:
2697 assert( j_arg + 1 < total_args_passed &&
2698 in_sig_bt[j_arg + 1] == T_VOID, "bad arg list");
2699 double_move(masm, src, dst);
2700 break;
2702 case T_LONG :
2703 long_move(masm, src, dst);
2704 break;
2706 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
2708 default:
2709 simple_move32(masm, src, dst);
2710 }
2711 }
2713 // Now we must convert any string we have to utf8
2714 //
2716 for (sid = 0, j_arg = first_arg_to_pass, c_arg = 0 ;
2717 sid < total_strings ; j_arg++, c_arg++ ) {
2719 if (out_sig_bt[c_arg] == T_ADDRESS) {
2721 Address utf8_addr = Address(
2722 rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
2723 __ leal(rax, utf8_addr);
2725 // The first string we find might still be in the original java arg
2726 // register
2727 VMReg orig_loc = in_regs[j_arg].first();
2728 Register string_oop;
2730 // This is where the argument will eventually reside
2731 Address dest = Address(rsp, reg2offset_out(out_regs[c_arg].first()));
2733 if (sid == 1 && orig_loc->is_reg()) {
2734 string_oop = orig_loc->as_Register();
2735 assert(string_oop != rax, "smashed arg");
2736 } else {
2738 if (orig_loc->is_reg()) {
2739 // Get the copy of the jls object
2740 __ movl(rcx, dest);
2741 } else {
2742 // arg is still in the original location
2743 __ movl(rcx, Address(rbp, reg2offset_in(orig_loc)));
2744 }
2745 string_oop = rcx;
2747 }
2748 Label nullString;
2749 __ movl(dest, NULL_WORD);
2750 __ testl(string_oop, string_oop);
2751 __ jcc(Assembler::zero, nullString);
2753 // Now we can store the address of the utf string as the argument
2754 __ movl(dest, rax);
2756 // And do the conversion
2757 __ call_VM_leaf(CAST_FROM_FN_PTR(
2758 address, SharedRuntime::get_utf), string_oop, rax);
2759 __ bind(nullString);
2760 }
2762 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
2763 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2764 ++c_arg; // Move over the T_VOID To keep the loop indices in sync
2765 }
2766 }
2769 // Ok now we are done. Need to place the nop that dtrace wants in order to
2770 // patch in the trap
2772 int patch_offset = ((intptr_t)__ pc()) - start;
2774 __ nop();
2777 // Return
2779 __ leave();
2780 __ ret(0);
2782 __ flush();
2784 nmethod *nm = nmethod::new_dtrace_nmethod(
2785 method, masm->code(), vep_offset, patch_offset, frame_complete,
2786 stack_slots / VMRegImpl::slots_per_word);
2787 return nm;
2789 }
2791 #endif // HAVE_DTRACE_H
2793 // this function returns the adjust size (in number of words) to a c2i adapter
2794 // activation for use during deoptimization
2795 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
2796 return (callee_locals - callee_parameters) * Interpreter::stackElementWords;
2797 }
2800 uint SharedRuntime::out_preserve_stack_slots() {
2801 return 0;
2802 }
2804 //------------------------------generate_deopt_blob----------------------------
2805 void SharedRuntime::generate_deopt_blob() {
2806 // allocate space for the code
2807 ResourceMark rm;
2808 // setup code generation tools
2809 CodeBuffer buffer("deopt_blob", 1024, 1024);
2810 MacroAssembler* masm = new MacroAssembler(&buffer);
2811 int frame_size_in_words;
2812 OopMap* map = NULL;
2813 // Account for the extra args we place on the stack
2814 // by the time we call fetch_unroll_info
2815 const int additional_words = 2; // deopt kind, thread
2817 OopMapSet *oop_maps = new OopMapSet();
2819 // -------------
2820 // This code enters when returning to a de-optimized nmethod. A return
2821 // address has been pushed on the the stack, and return values are in
2822 // registers.
2823 // If we are doing a normal deopt then we were called from the patched
2824 // nmethod from the point we returned to the nmethod. So the return
2825 // address on the stack is wrong by NativeCall::instruction_size
2826 // We will adjust the value to it looks like we have the original return
2827 // address on the stack (like when we eagerly deoptimized).
2828 // In the case of an exception pending with deoptimized then we enter
2829 // with a return address on the stack that points after the call we patched
2830 // into the exception handler. We have the following register state:
2831 // rax,: exception
2832 // rbx,: exception handler
2833 // rdx: throwing pc
2834 // So in this case we simply jam rdx into the useless return address and
2835 // the stack looks just like we want.
2836 //
2837 // At this point we need to de-opt. We save the argument return
2838 // registers. We call the first C routine, fetch_unroll_info(). This
2839 // routine captures the return values and returns a structure which
2840 // describes the current frame size and the sizes of all replacement frames.
2841 // The current frame is compiled code and may contain many inlined
2842 // functions, each with their own JVM state. We pop the current frame, then
2843 // push all the new frames. Then we call the C routine unpack_frames() to
2844 // populate these frames. Finally unpack_frames() returns us the new target
2845 // address. Notice that callee-save registers are BLOWN here; they have
2846 // already been captured in the vframeArray at the time the return PC was
2847 // patched.
2848 address start = __ pc();
2849 Label cont;
2851 // Prolog for non exception case!
2853 // Save everything in sight.
2855 map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false);
2856 // Normal deoptimization
2857 __ push(Deoptimization::Unpack_deopt);
2858 __ jmp(cont);
2860 int reexecute_offset = __ pc() - start;
2862 // Reexecute case
2863 // return address is the pc describes what bci to do re-execute at
2865 // No need to update map as each call to save_live_registers will produce identical oopmap
2866 (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false);
2868 __ push(Deoptimization::Unpack_reexecute);
2869 __ jmp(cont);
2871 int exception_offset = __ pc() - start;
2873 // Prolog for exception case
2875 // all registers are dead at this entry point, except for rax, and
2876 // rdx which contain the exception oop and exception pc
2877 // respectively. Set them in TLS and fall thru to the
2878 // unpack_with_exception_in_tls entry point.
2880 __ get_thread(rdi);
2881 __ movptr(Address(rdi, JavaThread::exception_pc_offset()), rdx);
2882 __ movptr(Address(rdi, JavaThread::exception_oop_offset()), rax);
2884 int exception_in_tls_offset = __ pc() - start;
2886 // new implementation because exception oop is now passed in JavaThread
2888 // Prolog for exception case
2889 // All registers must be preserved because they might be used by LinearScan
2890 // Exceptiop oop and throwing PC are passed in JavaThread
2891 // tos: stack at point of call to method that threw the exception (i.e. only
2892 // args are on the stack, no return address)
2894 // make room on stack for the return address
2895 // It will be patched later with the throwing pc. The correct value is not
2896 // available now because loading it from memory would destroy registers.
2897 __ push(0);
2899 // Save everything in sight.
2901 // No need to update map as each call to save_live_registers will produce identical oopmap
2902 (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false);
2904 // Now it is safe to overwrite any register
2906 // store the correct deoptimization type
2907 __ push(Deoptimization::Unpack_exception);
2909 // load throwing pc from JavaThread and patch it as the return address
2910 // of the current frame. Then clear the field in JavaThread
2911 __ get_thread(rdi);
2912 __ movptr(rdx, Address(rdi, JavaThread::exception_pc_offset()));
2913 __ movptr(Address(rbp, wordSize), rdx);
2914 __ movptr(Address(rdi, JavaThread::exception_pc_offset()), NULL_WORD);
2916 #ifdef ASSERT
2917 // verify that there is really an exception oop in JavaThread
2918 __ movptr(rax, Address(rdi, JavaThread::exception_oop_offset()));
2919 __ verify_oop(rax);
2921 // verify that there is no pending exception
2922 Label no_pending_exception;
2923 __ movptr(rax, Address(rdi, Thread::pending_exception_offset()));
2924 __ testptr(rax, rax);
2925 __ jcc(Assembler::zero, no_pending_exception);
2926 __ stop("must not have pending exception here");
2927 __ bind(no_pending_exception);
2928 #endif
2930 __ bind(cont);
2932 // Compiled code leaves the floating point stack dirty, empty it.
2933 __ empty_FPU_stack();
2936 // Call C code. Need thread and this frame, but NOT official VM entry
2937 // crud. We cannot block on this call, no GC can happen.
2938 __ get_thread(rcx);
2939 __ push(rcx);
2940 // fetch_unroll_info needs to call last_java_frame()
2941 __ set_last_Java_frame(rcx, noreg, noreg, NULL);
2943 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));
2945 // Need to have an oopmap that tells fetch_unroll_info where to
2946 // find any register it might need.
2948 oop_maps->add_gc_map( __ pc()-start, map);
2950 // Discard arg to fetch_unroll_info
2951 __ pop(rcx);
2953 __ get_thread(rcx);
2954 __ reset_last_Java_frame(rcx, false, false);
2956 // Load UnrollBlock into EDI
2957 __ mov(rdi, rax);
2959 // Move the unpack kind to a safe place in the UnrollBlock because
2960 // we are very short of registers
2962 Address unpack_kind(rdi, Deoptimization::UnrollBlock::unpack_kind_offset_in_bytes());
2963 // retrieve the deopt kind from where we left it.
2964 __ pop(rax);
2965 __ movl(unpack_kind, rax); // save the unpack_kind value
2967 Label noException;
2968 __ cmpl(rax, Deoptimization::Unpack_exception); // Was exception pending?
2969 __ jcc(Assembler::notEqual, noException);
2970 __ movptr(rax, Address(rcx, JavaThread::exception_oop_offset()));
2971 __ movptr(rdx, Address(rcx, JavaThread::exception_pc_offset()));
2972 __ movptr(Address(rcx, JavaThread::exception_oop_offset()), NULL_WORD);
2973 __ movptr(Address(rcx, JavaThread::exception_pc_offset()), NULL_WORD);
2975 __ verify_oop(rax);
2977 // Overwrite the result registers with the exception results.
2978 __ movptr(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
2979 __ movptr(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);
2981 __ bind(noException);
2983 // Stack is back to only having register save data on the stack.
2984 // Now restore the result registers. Everything else is either dead or captured
2985 // in the vframeArray.
2987 RegisterSaver::restore_result_registers(masm);
2989 // Non standard control word may be leaked out through a safepoint blob, and we can
2990 // deopt at a poll point with the non standard control word. However, we should make
2991 // sure the control word is correct after restore_result_registers.
2992 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
2994 // All of the register save area has been popped of the stack. Only the
2995 // return address remains.
2997 // Pop all the frames we must move/replace.
2998 //
2999 // Frame picture (youngest to oldest)
3000 // 1: self-frame (no frame link)
3001 // 2: deopting frame (no frame link)
3002 // 3: caller of deopting frame (could be compiled/interpreted).
3003 //
3004 // Note: by leaving the return address of self-frame on the stack
3005 // and using the size of frame 2 to adjust the stack
3006 // when we are done the return to frame 3 will still be on the stack.
3008 // Pop deoptimized frame
3009 __ addptr(rsp, Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
3011 // sp should be pointing at the return address to the caller (3)
3013 // Pick up the initial fp we should save
3014 // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
3015 __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
3017 #ifdef ASSERT
3018 // Compilers generate code that bang the stack by as much as the
3019 // interpreter would need. So this stack banging should never
3020 // trigger a fault. Verify that it does not on non product builds.
3021 if (UseStackBanging) {
3022 __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
3023 __ bang_stack_size(rbx, rcx);
3024 }
3025 #endif
3027 // Load array of frame pcs into ECX
3028 __ movptr(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
3030 __ pop(rsi); // trash the old pc
3032 // Load array of frame sizes into ESI
3033 __ movptr(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
3035 Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());
3037 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
3038 __ movl(counter, rbx);
3040 // Now adjust the caller's stack to make up for the extra locals
3041 // but record the original sp so that we can save it in the skeletal interpreter
3042 // frame and the stack walking of interpreter_sender will get the unextended sp
3043 // value and not the "real" sp value.
3045 Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
3046 __ movptr(sp_temp, rsp);
3047 __ movl2ptr(rbx, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
3048 __ subptr(rsp, rbx);
3050 // Push interpreter frames in a loop
3051 Label loop;
3052 __ bind(loop);
3053 __ movptr(rbx, Address(rsi, 0)); // Load frame size
3054 #ifdef CC_INTERP
3055 __ subptr(rbx, 4*wordSize); // we'll push pc and ebp by hand and
3056 #ifdef ASSERT
3057 __ push(0xDEADDEAD); // Make a recognizable pattern
3058 __ push(0xDEADDEAD);
3059 #else /* ASSERT */
3060 __ subptr(rsp, 2*wordSize); // skip the "static long no_param"
3061 #endif /* ASSERT */
3062 #else /* CC_INTERP */
3063 __ subptr(rbx, 2*wordSize); // we'll push pc and rbp, by hand
3064 #endif /* CC_INTERP */
3065 __ pushptr(Address(rcx, 0)); // save return address
3066 __ enter(); // save old & set new rbp,
3067 __ subptr(rsp, rbx); // Prolog!
3068 __ movptr(rbx, sp_temp); // sender's sp
3069 #ifdef CC_INTERP
3070 __ movptr(Address(rbp,
3071 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
3072 rbx); // Make it walkable
3073 #else /* CC_INTERP */
3074 // This value is corrected by layout_activation_impl
3075 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD);
3076 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
3077 #endif /* CC_INTERP */
3078 __ movptr(sp_temp, rsp); // pass to next frame
3079 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
3080 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
3081 __ decrementl(counter); // decrement counter
3082 __ jcc(Assembler::notZero, loop);
3083 __ pushptr(Address(rcx, 0)); // save final return address
3085 // Re-push self-frame
3086 __ enter(); // save old & set new rbp,
3088 // Return address and rbp, are in place
3089 // We'll push additional args later. Just allocate a full sized
3090 // register save area
3091 __ subptr(rsp, (frame_size_in_words-additional_words - 2) * wordSize);
3093 // Restore frame locals after moving the frame
3094 __ movptr(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax);
3095 __ movptr(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx);
3096 __ fstp_d(Address(rsp, RegisterSaver::fpResultOffset()*wordSize)); // Pop float stack and store in local
3097 if( UseSSE>=2 ) __ movdbl(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);
3098 if( UseSSE==1 ) __ movflt(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0);
3100 // Set up the args to unpack_frame
3102 __ pushl(unpack_kind); // get the unpack_kind value
3103 __ get_thread(rcx);
3104 __ push(rcx);
3106 // set last_Java_sp, last_Java_fp
3107 __ set_last_Java_frame(rcx, noreg, rbp, NULL);
3109 // Call C code. Need thread but NOT official VM entry
3110 // crud. We cannot block on this call, no GC can happen. Call should
3111 // restore return values to their stack-slots with the new SP.
3112 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
3113 // Set an oopmap for the call site
3114 oop_maps->add_gc_map( __ pc()-start, new OopMap( frame_size_in_words, 0 ));
3116 // rax, contains the return result type
3117 __ push(rax);
3119 __ get_thread(rcx);
3120 __ reset_last_Java_frame(rcx, false, false);
3122 // Collect return values
3123 __ movptr(rax,Address(rsp, (RegisterSaver::raxOffset() + additional_words + 1)*wordSize));
3124 __ movptr(rdx,Address(rsp, (RegisterSaver::rdxOffset() + additional_words + 1)*wordSize));
3126 // Clear floating point stack before returning to interpreter
3127 __ empty_FPU_stack();
3129 // Check if we should push the float or double return value.
3130 Label results_done, yes_double_value;
3131 __ cmpl(Address(rsp, 0), T_DOUBLE);
3132 __ jcc (Assembler::zero, yes_double_value);
3133 __ cmpl(Address(rsp, 0), T_FLOAT);
3134 __ jcc (Assembler::notZero, results_done);
3136 // return float value as expected by interpreter
3137 if( UseSSE>=1 ) __ movflt(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
3138 else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));
3139 __ jmp(results_done);
3141 // return double value as expected by interpreter
3142 __ bind(yes_double_value);
3143 if( UseSSE>=2 ) __ movdbl(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize));
3144 else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize));
3146 __ bind(results_done);
3148 // Pop self-frame.
3149 __ leave(); // Epilog!
3151 // Jump to interpreter
3152 __ ret(0);
3154 // -------------
3155 // make sure all code is generated
3156 masm->flush();
3158 _deopt_blob = DeoptimizationBlob::create( &buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
3159 _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
3160 }
3163 #ifdef COMPILER2
3164 //------------------------------generate_uncommon_trap_blob--------------------
3165 void SharedRuntime::generate_uncommon_trap_blob() {
3166 // allocate space for the code
3167 ResourceMark rm;
3168 // setup code generation tools
3169 CodeBuffer buffer("uncommon_trap_blob", 512, 512);
3170 MacroAssembler* masm = new MacroAssembler(&buffer);
3172 enum frame_layout {
3173 arg0_off, // thread sp + 0 // Arg location for
3174 arg1_off, // unloaded_class_index sp + 1 // calling C
3175 // The frame sender code expects that rbp will be in the "natural" place and
3176 // will override any oopMap setting for it. We must therefore force the layout
3177 // so that it agrees with the frame sender code.
3178 rbp_off, // callee saved register sp + 2
3179 return_off, // slot for return address sp + 3
3180 framesize
3181 };
3183 address start = __ pc();
3185 if (UseRTMLocking) {
3186 // Abort RTM transaction before possible nmethod deoptimization.
3187 __ xabort(0);
3188 }
3190 // Push self-frame.
3191 __ subptr(rsp, return_off*wordSize); // Epilog!
3193 // rbp, is an implicitly saved callee saved register (i.e. the calling
3194 // convention will save restore it in prolog/epilog) Other than that
3195 // there are no callee save registers no that adapter frames are gone.
3196 __ movptr(Address(rsp, rbp_off*wordSize), rbp);
3198 // Clear the floating point exception stack
3199 __ empty_FPU_stack();
3201 // set last_Java_sp
3202 __ get_thread(rdx);
3203 __ set_last_Java_frame(rdx, noreg, noreg, NULL);
3205 // Call C code. Need thread but NOT official VM entry
3206 // crud. We cannot block on this call, no GC can happen. Call should
3207 // capture callee-saved registers as well as return values.
3208 __ movptr(Address(rsp, arg0_off*wordSize), rdx);
3209 // argument already in ECX
3210 __ movl(Address(rsp, arg1_off*wordSize),rcx);
3211 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));
3213 // Set an oopmap for the call site
3214 OopMapSet *oop_maps = new OopMapSet();
3215 OopMap* map = new OopMap( framesize, 0 );
3216 // No oopMap for rbp, it is known implicitly
3218 oop_maps->add_gc_map( __ pc()-start, map);
3220 __ get_thread(rcx);
3222 __ reset_last_Java_frame(rcx, false, false);
3224 // Load UnrollBlock into EDI
3225 __ movptr(rdi, rax);
3227 // Pop all the frames we must move/replace.
3228 //
3229 // Frame picture (youngest to oldest)
3230 // 1: self-frame (no frame link)
3231 // 2: deopting frame (no frame link)
3232 // 3: caller of deopting frame (could be compiled/interpreted).
3234 // Pop self-frame. We have no frame, and must rely only on EAX and ESP.
3235 __ addptr(rsp,(framesize-1)*wordSize); // Epilog!
3237 // Pop deoptimized frame
3238 __ movl2ptr(rcx, Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
3239 __ addptr(rsp, rcx);
3241 // sp should be pointing at the return address to the caller (3)
3243 // Pick up the initial fp we should save
3244 // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
3245 __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
3247 #ifdef ASSERT
3248 // Compilers generate code that bang the stack by as much as the
3249 // interpreter would need. So this stack banging should never
3250 // trigger a fault. Verify that it does not on non product builds.
3251 if (UseStackBanging) {
3252 __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
3253 __ bang_stack_size(rbx, rcx);
3254 }
3255 #endif
3257 // Load array of frame pcs into ECX
3258 __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
3260 __ pop(rsi); // trash the pc
3262 // Load array of frame sizes into ESI
3263 __ movptr(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
3265 Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes());
3267 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
3268 __ movl(counter, rbx);
3270 // Now adjust the caller's stack to make up for the extra locals
3271 // but record the original sp so that we can save it in the skeletal interpreter
3272 // frame and the stack walking of interpreter_sender will get the unextended sp
3273 // value and not the "real" sp value.
3275 Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes());
3276 __ movptr(sp_temp, rsp);
3277 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes()));
3278 __ subptr(rsp, rbx);
3280 // Push interpreter frames in a loop
3281 Label loop;
3282 __ bind(loop);
3283 __ movptr(rbx, Address(rsi, 0)); // Load frame size
3284 #ifdef CC_INTERP
3285 __ subptr(rbx, 4*wordSize); // we'll push pc and ebp by hand and
3286 #ifdef ASSERT
3287 __ push(0xDEADDEAD); // Make a recognizable pattern
3288 __ push(0xDEADDEAD); // (parm to RecursiveInterpreter...)
3289 #else /* ASSERT */
3290 __ subptr(rsp, 2*wordSize); // skip the "static long no_param"
3291 #endif /* ASSERT */
3292 #else /* CC_INTERP */
3293 __ subptr(rbx, 2*wordSize); // we'll push pc and rbp, by hand
3294 #endif /* CC_INTERP */
3295 __ pushptr(Address(rcx, 0)); // save return address
3296 __ enter(); // save old & set new rbp,
3297 __ subptr(rsp, rbx); // Prolog!
3298 __ movptr(rbx, sp_temp); // sender's sp
3299 #ifdef CC_INTERP
3300 __ movptr(Address(rbp,
3301 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
3302 rbx); // Make it walkable
3303 #else /* CC_INTERP */
3304 // This value is corrected by layout_activation_impl
3305 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD );
3306 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable
3307 #endif /* CC_INTERP */
3308 __ movptr(sp_temp, rsp); // pass to next frame
3309 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
3310 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
3311 __ decrementl(counter); // decrement counter
3312 __ jcc(Assembler::notZero, loop);
3313 __ pushptr(Address(rcx, 0)); // save final return address
3315 // Re-push self-frame
3316 __ enter(); // save old & set new rbp,
3317 __ subptr(rsp, (framesize-2) * wordSize); // Prolog!
3320 // set last_Java_sp, last_Java_fp
3321 __ get_thread(rdi);
3322 __ set_last_Java_frame(rdi, noreg, rbp, NULL);
3324 // Call C code. Need thread but NOT official VM entry
3325 // crud. We cannot block on this call, no GC can happen. Call should
3326 // restore return values to their stack-slots with the new SP.
3327 __ movptr(Address(rsp,arg0_off*wordSize),rdi);
3328 __ movl(Address(rsp,arg1_off*wordSize), Deoptimization::Unpack_uncommon_trap);
3329 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
3330 // Set an oopmap for the call site
3331 oop_maps->add_gc_map( __ pc()-start, new OopMap( framesize, 0 ) );
3333 __ get_thread(rdi);
3334 __ reset_last_Java_frame(rdi, true, false);
3336 // Pop self-frame.
3337 __ leave(); // Epilog!
3339 // Jump to interpreter
3340 __ ret(0);
3342 // -------------
3343 // make sure all code is generated
3344 masm->flush();
3346 _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps, framesize);
3347 }
3348 #endif // COMPILER2
3350 //------------------------------generate_handler_blob------
3351 //
3352 // Generate a special Compile2Runtime blob that saves all registers,
3353 // setup oopmap, and calls safepoint code to stop the compiled code for
3354 // a safepoint.
3355 //
3356 SafepointBlob* SharedRuntime::generate_handler_blob(address call_ptr, int poll_type) {
3358 // Account for thread arg in our frame
3359 const int additional_words = 1;
3360 int frame_size_in_words;
3362 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3364 ResourceMark rm;
3365 OopMapSet *oop_maps = new OopMapSet();
3366 OopMap* map;
3368 // allocate space for the code
3369 // setup code generation tools
3370 CodeBuffer buffer("handler_blob", 1024, 512);
3371 MacroAssembler* masm = new MacroAssembler(&buffer);
3373 const Register java_thread = rdi; // callee-saved for VC++
3374 address start = __ pc();
3375 address call_pc = NULL;
3376 bool cause_return = (poll_type == POLL_AT_RETURN);
3377 bool save_vectors = (poll_type == POLL_AT_VECTOR_LOOP);
3379 if (UseRTMLocking) {
3380 // Abort RTM transaction before calling runtime
3381 // because critical section will be large and will be
3382 // aborted anyway. Also nmethod could be deoptimized.
3383 __ xabort(0);
3384 }
3386 // If cause_return is true we are at a poll_return and there is
3387 // the return address on the stack to the caller on the nmethod
3388 // that is safepoint. We can leave this return on the stack and
3389 // effectively complete the return and safepoint in the caller.
3390 // Otherwise we push space for a return address that the safepoint
3391 // handler will install later to make the stack walking sensible.
3392 if (!cause_return)
3393 __ push(rbx); // Make room for return address (or push it again)
3395 map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false, save_vectors);
3397 // The following is basically a call_VM. However, we need the precise
3398 // address of the call in order to generate an oopmap. Hence, we do all the
3399 // work ourselves.
3401 // Push thread argument and setup last_Java_sp
3402 __ get_thread(java_thread);
3403 __ push(java_thread);
3404 __ set_last_Java_frame(java_thread, noreg, noreg, NULL);
3406 // if this was not a poll_return then we need to correct the return address now.
3407 if (!cause_return) {
3408 __ movptr(rax, Address(java_thread, JavaThread::saved_exception_pc_offset()));
3409 __ movptr(Address(rbp, wordSize), rax);
3410 }
3412 // do the call
3413 __ call(RuntimeAddress(call_ptr));
3415 // Set an oopmap for the call site. This oopmap will map all
3416 // oop-registers and debug-info registers as callee-saved. This
3417 // will allow deoptimization at this safepoint to find all possible
3418 // debug-info recordings, as well as let GC find all oops.
3420 oop_maps->add_gc_map( __ pc() - start, map);
3422 // Discard arg
3423 __ pop(rcx);
3425 Label noException;
3427 // Clear last_Java_sp again
3428 __ get_thread(java_thread);
3429 __ reset_last_Java_frame(java_thread, false, false);
3431 __ cmpptr(Address(java_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3432 __ jcc(Assembler::equal, noException);
3434 // Exception pending
3435 RegisterSaver::restore_live_registers(masm, save_vectors);
3437 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3439 __ bind(noException);
3441 // Normal exit, register restoring and exit
3442 RegisterSaver::restore_live_registers(masm, save_vectors);
3444 __ ret(0);
3446 // make sure all code is generated
3447 masm->flush();
3449 // Fill-out other meta info
3450 return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
3451 }
3453 //
3454 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
3455 //
3456 // Generate a stub that calls into vm to find out the proper destination
3457 // of a java call. All the argument registers are live at this point
3458 // but since this is generic code we don't know what they are and the caller
3459 // must do any gc of the args.
3460 //
3461 RuntimeStub* SharedRuntime::generate_resolve_blob(address destination, const char* name) {
3462 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3464 // allocate space for the code
3465 ResourceMark rm;
3467 CodeBuffer buffer(name, 1000, 512);
3468 MacroAssembler* masm = new MacroAssembler(&buffer);
3470 int frame_size_words;
3471 enum frame_layout {
3472 thread_off,
3473 extra_words };
3475 OopMapSet *oop_maps = new OopMapSet();
3476 OopMap* map = NULL;
3478 int start = __ offset();
3480 map = RegisterSaver::save_live_registers(masm, extra_words, &frame_size_words);
3482 int frame_complete = __ offset();
3484 const Register thread = rdi;
3485 __ get_thread(rdi);
3487 __ push(thread);
3488 __ set_last_Java_frame(thread, noreg, rbp, NULL);
3490 __ call(RuntimeAddress(destination));
3493 // Set an oopmap for the call site.
3494 // We need this not only for callee-saved registers, but also for volatile
3495 // registers that the compiler might be keeping live across a safepoint.
3497 oop_maps->add_gc_map( __ offset() - start, map);
3499 // rax, contains the address we are going to jump to assuming no exception got installed
3501 __ addptr(rsp, wordSize);
3503 // clear last_Java_sp
3504 __ reset_last_Java_frame(thread, true, false);
3505 // check for pending exceptions
3506 Label pending;
3507 __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3508 __ jcc(Assembler::notEqual, pending);
3510 // get the returned Method*
3511 __ get_vm_result_2(rbx, thread);
3512 __ movptr(Address(rsp, RegisterSaver::rbx_offset() * wordSize), rbx);
3514 __ movptr(Address(rsp, RegisterSaver::rax_offset() * wordSize), rax);
3516 RegisterSaver::restore_live_registers(masm);
3518 // We are back the the original state on entry and ready to go.
3520 __ jmp(rax);
3522 // Pending exception after the safepoint
3524 __ bind(pending);
3526 RegisterSaver::restore_live_registers(masm);
3528 // exception pending => remove activation and forward to exception handler
3530 __ get_thread(thread);
3531 __ movptr(Address(thread, JavaThread::vm_result_offset()), NULL_WORD);
3532 __ movptr(rax, Address(thread, Thread::pending_exception_offset()));
3533 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3535 // -------------
3536 // make sure all code is generated
3537 masm->flush();
3539 // return the blob
3540 // frame_size_words or bytes??
3541 return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_words, oop_maps, true);
3542 }