Mon, 27 May 2013 12:56:34 +0200
8015428: Remove unused CDS support from StringTable
Summary: The string in StringTable is not used by CDS anymore. Remove the unnecessary code in preparation for 8015422: Large performance hit when the StringTable is walked twice in Parallel Scavenge
Reviewed-by: pliden, tschatzl, coleenp
1 /*
2 * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "memory/allocation.inline.hpp"
27 #include "opto/block.hpp"
28 #include "opto/cfgnode.hpp"
29 #include "opto/chaitin.hpp"
30 #include "opto/coalesce.hpp"
31 #include "opto/connode.hpp"
32 #include "opto/indexSet.hpp"
33 #include "opto/machnode.hpp"
34 #include "opto/matcher.hpp"
35 #include "opto/regmask.hpp"
37 //=============================================================================
38 //------------------------------Dump-------------------------------------------
39 #ifndef PRODUCT
40 void PhaseCoalesce::dump(Node *n) const {
41 // Being a const function means I cannot use 'Find'
42 uint r = _phc._lrg_map.find(n);
43 tty->print("L%d/N%d ",r,n->_idx);
44 }
46 //------------------------------dump-------------------------------------------
47 void PhaseCoalesce::dump() const {
48 // I know I have a block layout now, so I can print blocks in a loop
49 for( uint i=0; i<_phc._cfg._num_blocks; i++ ) {
50 uint j;
51 Block *b = _phc._cfg._blocks[i];
52 // Print a nice block header
53 tty->print("B%d: ",b->_pre_order);
54 for( j=1; j<b->num_preds(); j++ )
55 tty->print("B%d ", _phc._cfg._bbs[b->pred(j)->_idx]->_pre_order);
56 tty->print("-> ");
57 for( j=0; j<b->_num_succs; j++ )
58 tty->print("B%d ",b->_succs[j]->_pre_order);
59 tty->print(" IDom: B%d/#%d\n", b->_idom ? b->_idom->_pre_order : 0, b->_dom_depth);
60 uint cnt = b->_nodes.size();
61 for( j=0; j<cnt; j++ ) {
62 Node *n = b->_nodes[j];
63 dump( n );
64 tty->print("\t%s\t",n->Name());
66 // Dump the inputs
67 uint k; // Exit value of loop
68 for( k=0; k<n->req(); k++ ) // For all required inputs
69 if( n->in(k) ) dump( n->in(k) );
70 else tty->print("_ ");
71 int any_prec = 0;
72 for( ; k<n->len(); k++ ) // For all precedence inputs
73 if( n->in(k) ) {
74 if( !any_prec++ ) tty->print(" |");
75 dump( n->in(k) );
76 }
78 // Dump node-specific info
79 n->dump_spec(tty);
80 tty->print("\n");
82 }
83 tty->print("\n");
84 }
85 }
86 #endif
88 //------------------------------combine_these_two------------------------------
89 // Combine the live ranges def'd by these 2 Nodes. N2 is an input to N1.
90 void PhaseCoalesce::combine_these_two(Node *n1, Node *n2) {
91 uint lr1 = _phc._lrg_map.find(n1);
92 uint lr2 = _phc._lrg_map.find(n2);
93 if( lr1 != lr2 && // Different live ranges already AND
94 !_phc._ifg->test_edge_sq( lr1, lr2 ) ) { // Do not interfere
95 LRG *lrg1 = &_phc.lrgs(lr1);
96 LRG *lrg2 = &_phc.lrgs(lr2);
97 // Not an oop->int cast; oop->oop, int->int, AND int->oop are OK.
99 // Now, why is int->oop OK? We end up declaring a raw-pointer as an oop
100 // and in general that's a bad thing. However, int->oop conversions only
101 // happen at GC points, so the lifetime of the misclassified raw-pointer
102 // is from the CheckCastPP (that converts it to an oop) backwards up
103 // through a merge point and into the slow-path call, and around the
104 // diamond up to the heap-top check and back down into the slow-path call.
105 // The misclassified raw pointer is NOT live across the slow-path call,
106 // and so does not appear in any GC info, so the fact that it is
107 // misclassified is OK.
109 if( (lrg1->_is_oop || !lrg2->_is_oop) && // not an oop->int cast AND
110 // Compatible final mask
111 lrg1->mask().overlap( lrg2->mask() ) ) {
112 // Merge larger into smaller.
113 if( lr1 > lr2 ) {
114 uint tmp = lr1; lr1 = lr2; lr2 = tmp;
115 Node *n = n1; n1 = n2; n2 = n;
116 LRG *ltmp = lrg1; lrg1 = lrg2; lrg2 = ltmp;
117 }
118 // Union lr2 into lr1
119 _phc.Union( n1, n2 );
120 if (lrg1->_maxfreq < lrg2->_maxfreq)
121 lrg1->_maxfreq = lrg2->_maxfreq;
122 // Merge in the IFG
123 _phc._ifg->Union( lr1, lr2 );
124 // Combine register restrictions
125 lrg1->AND(lrg2->mask());
126 }
127 }
128 }
130 //------------------------------coalesce_driver--------------------------------
131 // Copy coalescing
132 void PhaseCoalesce::coalesce_driver( ) {
134 verify();
135 // Coalesce from high frequency to low
136 for( uint i=0; i<_phc._cfg._num_blocks; i++ )
137 coalesce( _phc._blks[i] );
139 }
141 //------------------------------insert_copy_with_overlap-----------------------
142 // I am inserting copies to come out of SSA form. In the general case, I am
143 // doing a parallel renaming. I'm in the Named world now, so I can't do a
144 // general parallel renaming. All the copies now use "names" (live-ranges)
145 // to carry values instead of the explicit use-def chains. Suppose I need to
146 // insert 2 copies into the same block. They copy L161->L128 and L128->L132.
147 // If I insert them in the wrong order then L128 will get clobbered before it
148 // can get used by the second copy. This cannot happen in the SSA model;
149 // direct use-def chains get me the right value. It DOES happen in the named
150 // model so I have to handle the reordering of copies.
151 //
152 // In general, I need to topo-sort the placed copies to avoid conflicts.
153 // Its possible to have a closed cycle of copies (e.g., recirculating the same
154 // values around a loop). In this case I need a temp to break the cycle.
155 void PhaseAggressiveCoalesce::insert_copy_with_overlap( Block *b, Node *copy, uint dst_name, uint src_name ) {
157 // Scan backwards for the locations of the last use of the dst_name.
158 // I am about to clobber the dst_name, so the copy must be inserted
159 // after the last use. Last use is really first-use on a backwards scan.
160 uint i = b->end_idx()-1;
161 while(1) {
162 Node *n = b->_nodes[i];
163 // Check for end of virtual copies; this is also the end of the
164 // parallel renaming effort.
165 if (n->_idx < _unique) {
166 break;
167 }
168 uint idx = n->is_Copy();
169 assert( idx || n->is_Con() || n->is_MachProj(), "Only copies during parallel renaming" );
170 if (idx && _phc._lrg_map.find(n->in(idx)) == dst_name) {
171 break;
172 }
173 i--;
174 }
175 uint last_use_idx = i;
177 // Also search for any kill of src_name that exits the block.
178 // Since the copy uses src_name, I have to come before any kill.
179 uint kill_src_idx = b->end_idx();
180 // There can be only 1 kill that exits any block and that is
181 // the last kill. Thus it is the first kill on a backwards scan.
182 i = b->end_idx()-1;
183 while (1) {
184 Node *n = b->_nodes[i];
185 // Check for end of virtual copies; this is also the end of the
186 // parallel renaming effort.
187 if (n->_idx < _unique) {
188 break;
189 }
190 assert( n->is_Copy() || n->is_Con() || n->is_MachProj(), "Only copies during parallel renaming" );
191 if (_phc._lrg_map.find(n) == src_name) {
192 kill_src_idx = i;
193 break;
194 }
195 i--;
196 }
197 // Need a temp? Last use of dst comes after the kill of src?
198 if (last_use_idx >= kill_src_idx) {
199 // Need to break a cycle with a temp
200 uint idx = copy->is_Copy();
201 Node *tmp = copy->clone();
202 uint max_lrg_id = _phc._lrg_map.max_lrg_id();
203 _phc.new_lrg(tmp, max_lrg_id);
204 _phc._lrg_map.set_max_lrg_id(max_lrg_id + 1);
206 // Insert new temp between copy and source
207 tmp ->set_req(idx,copy->in(idx));
208 copy->set_req(idx,tmp);
209 // Save source in temp early, before source is killed
210 b->_nodes.insert(kill_src_idx,tmp);
211 _phc._cfg._bbs.map( tmp->_idx, b );
212 last_use_idx++;
213 }
215 // Insert just after last use
216 b->_nodes.insert(last_use_idx+1,copy);
217 }
219 //------------------------------insert_copies----------------------------------
220 void PhaseAggressiveCoalesce::insert_copies( Matcher &matcher ) {
221 // We do LRGs compressing and fix a liveout data only here since the other
222 // place in Split() is guarded by the assert which we never hit.
223 _phc._lrg_map.compress_uf_map_for_nodes();
224 // Fix block's liveout data for compressed live ranges.
225 for (uint lrg = 1; lrg < _phc._lrg_map.max_lrg_id(); lrg++) {
226 uint compressed_lrg = _phc._lrg_map.find(lrg);
227 if (lrg != compressed_lrg) {
228 for (uint bidx = 0; bidx < _phc._cfg._num_blocks; bidx++) {
229 IndexSet *liveout = _phc._live->live(_phc._cfg._blocks[bidx]);
230 if (liveout->member(lrg)) {
231 liveout->remove(lrg);
232 liveout->insert(compressed_lrg);
233 }
234 }
235 }
236 }
238 // All new nodes added are actual copies to replace virtual copies.
239 // Nodes with index less than '_unique' are original, non-virtual Nodes.
240 _unique = C->unique();
242 for( uint i=0; i<_phc._cfg._num_blocks; i++ ) {
243 Block *b = _phc._cfg._blocks[i];
244 uint cnt = b->num_preds(); // Number of inputs to the Phi
246 for( uint l = 1; l<b->_nodes.size(); l++ ) {
247 Node *n = b->_nodes[l];
249 // Do not use removed-copies, use copied value instead
250 uint ncnt = n->req();
251 for( uint k = 1; k<ncnt; k++ ) {
252 Node *copy = n->in(k);
253 uint cidx = copy->is_Copy();
254 if( cidx ) {
255 Node *def = copy->in(cidx);
256 if (_phc._lrg_map.find(copy) == _phc._lrg_map.find(def)) {
257 n->set_req(k, def);
258 }
259 }
260 }
262 // Remove any explicit copies that get coalesced.
263 uint cidx = n->is_Copy();
264 if( cidx ) {
265 Node *def = n->in(cidx);
266 if (_phc._lrg_map.find(n) == _phc._lrg_map.find(def)) {
267 n->replace_by(def);
268 n->set_req(cidx,NULL);
269 b->_nodes.remove(l);
270 l--;
271 continue;
272 }
273 }
275 if (n->is_Phi()) {
276 // Get the chosen name for the Phi
277 uint phi_name = _phc._lrg_map.find(n);
278 // Ignore the pre-allocated specials
279 if (!phi_name) {
280 continue;
281 }
282 // Check for mismatch inputs to Phi
283 for (uint j = 1; j < cnt; j++) {
284 Node *m = n->in(j);
285 uint src_name = _phc._lrg_map.find(m);
286 if (src_name != phi_name) {
287 Block *pred = _phc._cfg._bbs[b->pred(j)->_idx];
288 Node *copy;
289 assert(!m->is_Con() || m->is_Mach(), "all Con must be Mach");
290 // Rematerialize constants instead of copying them
291 if( m->is_Mach() && m->as_Mach()->is_Con() &&
292 m->as_Mach()->rematerialize() ) {
293 copy = m->clone();
294 // Insert the copy in the predecessor basic block
295 pred->add_inst(copy);
296 // Copy any flags as well
297 _phc.clone_projs(pred, pred->end_idx(), m, copy, _phc._lrg_map);
298 } else {
299 const RegMask *rm = C->matcher()->idealreg2spillmask[m->ideal_reg()];
300 copy = new (C) MachSpillCopyNode(m, *rm, *rm);
301 // Find a good place to insert. Kinda tricky, use a subroutine
302 insert_copy_with_overlap(pred,copy,phi_name,src_name);
303 }
304 // Insert the copy in the use-def chain
305 n->set_req(j, copy);
306 _phc._cfg._bbs.map( copy->_idx, pred );
307 // Extend ("register allocate") the names array for the copy.
308 _phc._lrg_map.extend(copy->_idx, phi_name);
309 } // End of if Phi names do not match
310 } // End of for all inputs to Phi
311 } else { // End of if Phi
313 // Now check for 2-address instructions
314 uint idx;
315 if( n->is_Mach() && (idx=n->as_Mach()->two_adr()) ) {
316 // Get the chosen name for the Node
317 uint name = _phc._lrg_map.find(n);
318 assert (name, "no 2-address specials");
319 // Check for name mis-match on the 2-address input
320 Node *m = n->in(idx);
321 if (_phc._lrg_map.find(m) != name) {
322 Node *copy;
323 assert(!m->is_Con() || m->is_Mach(), "all Con must be Mach");
324 // At this point it is unsafe to extend live ranges (6550579).
325 // Rematerialize only constants as we do for Phi above.
326 if(m->is_Mach() && m->as_Mach()->is_Con() &&
327 m->as_Mach()->rematerialize()) {
328 copy = m->clone();
329 // Insert the copy in the basic block, just before us
330 b->_nodes.insert(l++, copy);
331 if(_phc.clone_projs(b, l, m, copy, _phc._lrg_map)) {
332 l++;
333 }
334 } else {
335 const RegMask *rm = C->matcher()->idealreg2spillmask[m->ideal_reg()];
336 copy = new (C) MachSpillCopyNode(m, *rm, *rm);
337 // Insert the copy in the basic block, just before us
338 b->_nodes.insert(l++, copy);
339 }
340 // Insert the copy in the use-def chain
341 n->set_req(idx, copy);
342 // Extend ("register allocate") the names array for the copy.
343 _phc._lrg_map.extend(copy->_idx, name);
344 _phc._cfg._bbs.map( copy->_idx, b );
345 }
347 } // End of is two-adr
349 // Insert a copy at a debug use for a lrg which has high frequency
350 if (b->_freq < OPTO_DEBUG_SPLIT_FREQ || b->is_uncommon(_phc._cfg._bbs)) {
351 // Walk the debug inputs to the node and check for lrg freq
352 JVMState* jvms = n->jvms();
353 uint debug_start = jvms ? jvms->debug_start() : 999999;
354 uint debug_end = jvms ? jvms->debug_end() : 999999;
355 for(uint inpidx = debug_start; inpidx < debug_end; inpidx++) {
356 // Do not split monitors; they are only needed for debug table
357 // entries and need no code.
358 if (jvms->is_monitor_use(inpidx)) {
359 continue;
360 }
361 Node *inp = n->in(inpidx);
362 uint nidx = _phc._lrg_map.live_range_id(inp);
363 LRG &lrg = lrgs(nidx);
365 // If this lrg has a high frequency use/def
366 if( lrg._maxfreq >= _phc.high_frequency_lrg() ) {
367 // If the live range is also live out of this block (like it
368 // would be for a fast/slow idiom), the normal spill mechanism
369 // does an excellent job. If it is not live out of this block
370 // (like it would be for debug info to uncommon trap) splitting
371 // the live range now allows a better allocation in the high
372 // frequency blocks.
373 // Build_IFG_virtual has converted the live sets to
374 // live-IN info, not live-OUT info.
375 uint k;
376 for( k=0; k < b->_num_succs; k++ )
377 if( _phc._live->live(b->_succs[k])->member( nidx ) )
378 break; // Live in to some successor block?
379 if( k < b->_num_succs )
380 continue; // Live out; do not pre-split
381 // Split the lrg at this use
382 const RegMask *rm = C->matcher()->idealreg2spillmask[inp->ideal_reg()];
383 Node *copy = new (C) MachSpillCopyNode( inp, *rm, *rm );
384 // Insert the copy in the use-def chain
385 n->set_req(inpidx, copy );
386 // Insert the copy in the basic block, just before us
387 b->_nodes.insert( l++, copy );
388 // Extend ("register allocate") the names array for the copy.
389 uint max_lrg_id = _phc._lrg_map.max_lrg_id();
390 _phc.new_lrg(copy, max_lrg_id);
391 _phc._lrg_map.set_max_lrg_id(max_lrg_id + 1);
392 _phc._cfg._bbs.map(copy->_idx, b);
393 //tty->print_cr("Split a debug use in Aggressive Coalesce");
394 } // End of if high frequency use/def
395 } // End of for all debug inputs
396 } // End of if low frequency safepoint
398 } // End of if Phi
400 } // End of for all instructions
401 } // End of for all blocks
402 }
404 //=============================================================================
405 //------------------------------coalesce---------------------------------------
406 // Aggressive (but pessimistic) copy coalescing of a single block
408 // The following coalesce pass represents a single round of aggressive
409 // pessimistic coalesce. "Aggressive" means no attempt to preserve
410 // colorability when coalescing. This occasionally means more spills, but
411 // it also means fewer rounds of coalescing for better code - and that means
412 // faster compiles.
414 // "Pessimistic" means we do not hit the fixed point in one pass (and we are
415 // reaching for the least fixed point to boot). This is typically solved
416 // with a few more rounds of coalescing, but the compiler must run fast. We
417 // could optimistically coalescing everything touching PhiNodes together
418 // into one big live range, then check for self-interference. Everywhere
419 // the live range interferes with self it would have to be split. Finding
420 // the right split points can be done with some heuristics (based on
421 // expected frequency of edges in the live range). In short, it's a real
422 // research problem and the timeline is too short to allow such research.
423 // Further thoughts: (1) build the LR in a pass, (2) find self-interference
424 // in another pass, (3) per each self-conflict, split, (4) split by finding
425 // the low-cost cut (min-cut) of the LR, (5) edges in the LR are weighted
426 // according to the GCM algorithm (or just exec freq on CFG edges).
428 void PhaseAggressiveCoalesce::coalesce( Block *b ) {
429 // Copies are still "virtual" - meaning we have not made them explicitly
430 // copies. Instead, Phi functions of successor blocks have mis-matched
431 // live-ranges. If I fail to coalesce, I'll have to insert a copy to line
432 // up the live-ranges. Check for Phis in successor blocks.
433 uint i;
434 for( i=0; i<b->_num_succs; i++ ) {
435 Block *bs = b->_succs[i];
436 // Find index of 'b' in 'bs' predecessors
437 uint j=1;
438 while( _phc._cfg._bbs[bs->pred(j)->_idx] != b ) j++;
439 // Visit all the Phis in successor block
440 for( uint k = 1; k<bs->_nodes.size(); k++ ) {
441 Node *n = bs->_nodes[k];
442 if( !n->is_Phi() ) break;
443 combine_these_two( n, n->in(j) );
444 }
445 } // End of for all successor blocks
448 // Check _this_ block for 2-address instructions and copies.
449 uint cnt = b->end_idx();
450 for( i = 1; i<cnt; i++ ) {
451 Node *n = b->_nodes[i];
452 uint idx;
453 // 2-address instructions have a virtual Copy matching their input
454 // to their output
455 if (n->is_Mach() && (idx = n->as_Mach()->two_adr())) {
456 MachNode *mach = n->as_Mach();
457 combine_these_two(mach, mach->in(idx));
458 }
459 } // End of for all instructions in block
460 }
462 //=============================================================================
463 //------------------------------PhaseConservativeCoalesce----------------------
464 PhaseConservativeCoalesce::PhaseConservativeCoalesce(PhaseChaitin &chaitin) : PhaseCoalesce(chaitin) {
465 _ulr.initialize(_phc._lrg_map.max_lrg_id());
466 }
468 //------------------------------verify-----------------------------------------
469 void PhaseConservativeCoalesce::verify() {
470 #ifdef ASSERT
471 _phc.set_was_low();
472 #endif
473 }
475 //------------------------------union_helper-----------------------------------
476 void PhaseConservativeCoalesce::union_helper( Node *lr1_node, Node *lr2_node, uint lr1, uint lr2, Node *src_def, Node *dst_copy, Node *src_copy, Block *b, uint bindex ) {
477 // Join live ranges. Merge larger into smaller. Union lr2 into lr1 in the
478 // union-find tree
479 _phc.Union( lr1_node, lr2_node );
481 // Single-def live range ONLY if both live ranges are single-def.
482 // If both are single def, then src_def powers one live range
483 // and def_copy powers the other. After merging, src_def powers
484 // the combined live range.
485 lrgs(lr1)._def = (lrgs(lr1).is_multidef() ||
486 lrgs(lr2).is_multidef() )
487 ? NodeSentinel : src_def;
488 lrgs(lr2)._def = NULL; // No def for lrg 2
489 lrgs(lr2).Clear(); // Force empty mask for LRG 2
490 //lrgs(lr2)._size = 0; // Live-range 2 goes dead
491 lrgs(lr1)._is_oop |= lrgs(lr2)._is_oop;
492 lrgs(lr2)._is_oop = 0; // In particular, not an oop for GC info
494 if (lrgs(lr1)._maxfreq < lrgs(lr2)._maxfreq)
495 lrgs(lr1)._maxfreq = lrgs(lr2)._maxfreq;
497 // Copy original value instead. Intermediate copies go dead, and
498 // the dst_copy becomes useless.
499 int didx = dst_copy->is_Copy();
500 dst_copy->set_req( didx, src_def );
501 // Add copy to free list
502 // _phc.free_spillcopy(b->_nodes[bindex]);
503 assert( b->_nodes[bindex] == dst_copy, "" );
504 dst_copy->replace_by( dst_copy->in(didx) );
505 dst_copy->set_req( didx, NULL);
506 b->_nodes.remove(bindex);
507 if( bindex < b->_ihrp_index ) b->_ihrp_index--;
508 if( bindex < b->_fhrp_index ) b->_fhrp_index--;
510 // Stretched lr1; add it to liveness of intermediate blocks
511 Block *b2 = _phc._cfg._bbs[src_copy->_idx];
512 while( b != b2 ) {
513 b = _phc._cfg._bbs[b->pred(1)->_idx];
514 _phc._live->live(b)->insert(lr1);
515 }
516 }
518 //------------------------------compute_separating_interferences---------------
519 // Factored code from copy_copy that computes extra interferences from
520 // lengthening a live range by double-coalescing.
521 uint PhaseConservativeCoalesce::compute_separating_interferences(Node *dst_copy, Node *src_copy, Block *b, uint bindex, RegMask &rm, uint reg_degree, uint rm_size, uint lr1, uint lr2 ) {
523 assert(!lrgs(lr1)._fat_proj, "cannot coalesce fat_proj");
524 assert(!lrgs(lr2)._fat_proj, "cannot coalesce fat_proj");
525 Node *prev_copy = dst_copy->in(dst_copy->is_Copy());
526 Block *b2 = b;
527 uint bindex2 = bindex;
528 while( 1 ) {
529 // Find previous instruction
530 bindex2--; // Chain backwards 1 instruction
531 while( bindex2 == 0 ) { // At block start, find prior block
532 assert( b2->num_preds() == 2, "cannot double coalesce across c-flow" );
533 b2 = _phc._cfg._bbs[b2->pred(1)->_idx];
534 bindex2 = b2->end_idx()-1;
535 }
536 // Get prior instruction
537 assert(bindex2 < b2->_nodes.size(), "index out of bounds");
538 Node *x = b2->_nodes[bindex2];
539 if( x == prev_copy ) { // Previous copy in copy chain?
540 if( prev_copy == src_copy)// Found end of chain and all interferences
541 break; // So break out of loop
542 // Else work back one in copy chain
543 prev_copy = prev_copy->in(prev_copy->is_Copy());
544 } else { // Else collect interferences
545 uint lidx = _phc._lrg_map.find(x);
546 // Found another def of live-range being stretched?
547 if(lidx == lr1) {
548 return max_juint;
549 }
550 if(lidx == lr2) {
551 return max_juint;
552 }
554 // If we attempt to coalesce across a bound def
555 if( lrgs(lidx).is_bound() ) {
556 // Do not let the coalesced LRG expect to get the bound color
557 rm.SUBTRACT( lrgs(lidx).mask() );
558 // Recompute rm_size
559 rm_size = rm.Size();
560 //if( rm._flags ) rm_size += 1000000;
561 if( reg_degree >= rm_size ) return max_juint;
562 }
563 if( rm.overlap(lrgs(lidx).mask()) ) {
564 // Insert lidx into union LRG; returns TRUE if actually inserted
565 if( _ulr.insert(lidx) ) {
566 // Infinite-stack neighbors do not alter colorability, as they
567 // can always color to some other color.
568 if( !lrgs(lidx).mask().is_AllStack() ) {
569 // If this coalesce will make any new neighbor uncolorable,
570 // do not coalesce.
571 if( lrgs(lidx).just_lo_degree() )
572 return max_juint;
573 // Bump our degree
574 if( ++reg_degree >= rm_size )
575 return max_juint;
576 } // End of if not infinite-stack neighbor
577 } // End of if actually inserted
578 } // End of if live range overlaps
579 } // End of else collect interferences for 1 node
580 } // End of while forever, scan back for interferences
581 return reg_degree;
582 }
584 //------------------------------update_ifg-------------------------------------
585 void PhaseConservativeCoalesce::update_ifg(uint lr1, uint lr2, IndexSet *n_lr1, IndexSet *n_lr2) {
586 // Some original neighbors of lr1 might have gone away
587 // because the constrained register mask prevented them.
588 // Remove lr1 from such neighbors.
589 IndexSetIterator one(n_lr1);
590 uint neighbor;
591 LRG &lrg1 = lrgs(lr1);
592 while ((neighbor = one.next()) != 0)
593 if( !_ulr.member(neighbor) )
594 if( _phc._ifg->neighbors(neighbor)->remove(lr1) )
595 lrgs(neighbor).inc_degree( -lrg1.compute_degree(lrgs(neighbor)) );
598 // lr2 is now called (coalesced into) lr1.
599 // Remove lr2 from the IFG.
600 IndexSetIterator two(n_lr2);
601 LRG &lrg2 = lrgs(lr2);
602 while ((neighbor = two.next()) != 0)
603 if( _phc._ifg->neighbors(neighbor)->remove(lr2) )
604 lrgs(neighbor).inc_degree( -lrg2.compute_degree(lrgs(neighbor)) );
606 // Some neighbors of intermediate copies now interfere with the
607 // combined live range.
608 IndexSetIterator three(&_ulr);
609 while ((neighbor = three.next()) != 0)
610 if( _phc._ifg->neighbors(neighbor)->insert(lr1) )
611 lrgs(neighbor).inc_degree( lrg1.compute_degree(lrgs(neighbor)) );
612 }
614 //------------------------------record_bias------------------------------------
615 static void record_bias( const PhaseIFG *ifg, int lr1, int lr2 ) {
616 // Tag copy bias here
617 if( !ifg->lrgs(lr1)._copy_bias )
618 ifg->lrgs(lr1)._copy_bias = lr2;
619 if( !ifg->lrgs(lr2)._copy_bias )
620 ifg->lrgs(lr2)._copy_bias = lr1;
621 }
623 //------------------------------copy_copy--------------------------------------
624 // See if I can coalesce a series of multiple copies together. I need the
625 // final dest copy and the original src copy. They can be the same Node.
626 // Compute the compatible register masks.
627 bool PhaseConservativeCoalesce::copy_copy(Node *dst_copy, Node *src_copy, Block *b, uint bindex) {
629 if (!dst_copy->is_SpillCopy()) {
630 return false;
631 }
632 if (!src_copy->is_SpillCopy()) {
633 return false;
634 }
635 Node *src_def = src_copy->in(src_copy->is_Copy());
636 uint lr1 = _phc._lrg_map.find(dst_copy);
637 uint lr2 = _phc._lrg_map.find(src_def);
639 // Same live ranges already?
640 if (lr1 == lr2) {
641 return false;
642 }
644 // Interfere?
645 if (_phc._ifg->test_edge_sq(lr1, lr2)) {
646 return false;
647 }
649 // Not an oop->int cast; oop->oop, int->int, AND int->oop are OK.
650 if (!lrgs(lr1)._is_oop && lrgs(lr2)._is_oop) { // not an oop->int cast
651 return false;
652 }
654 // Coalescing between an aligned live range and a mis-aligned live range?
655 // No, no! Alignment changes how we count degree.
656 if (lrgs(lr1)._fat_proj != lrgs(lr2)._fat_proj) {
657 return false;
658 }
660 // Sort; use smaller live-range number
661 Node *lr1_node = dst_copy;
662 Node *lr2_node = src_def;
663 if (lr1 > lr2) {
664 uint tmp = lr1; lr1 = lr2; lr2 = tmp;
665 lr1_node = src_def; lr2_node = dst_copy;
666 }
668 // Check for compatibility of the 2 live ranges by
669 // intersecting their allowed register sets.
670 RegMask rm = lrgs(lr1).mask();
671 rm.AND(lrgs(lr2).mask());
672 // Number of bits free
673 uint rm_size = rm.Size();
675 if (UseFPUForSpilling && rm.is_AllStack() ) {
676 // Don't coalesce when frequency difference is large
677 Block *dst_b = _phc._cfg._bbs[dst_copy->_idx];
678 Block *src_def_b = _phc._cfg._bbs[src_def->_idx];
679 if (src_def_b->_freq > 10*dst_b->_freq )
680 return false;
681 }
683 // If we can use any stack slot, then effective size is infinite
684 if( rm.is_AllStack() ) rm_size += 1000000;
685 // Incompatible masks, no way to coalesce
686 if( rm_size == 0 ) return false;
688 // Another early bail-out test is when we are double-coalescing and the
689 // 2 copies are separated by some control flow.
690 if( dst_copy != src_copy ) {
691 Block *src_b = _phc._cfg._bbs[src_copy->_idx];
692 Block *b2 = b;
693 while( b2 != src_b ) {
694 if( b2->num_preds() > 2 ){// Found merge-point
695 _phc._lost_opp_cflow_coalesce++;
696 // extra record_bias commented out because Chris believes it is not
697 // productive. Since we can record only 1 bias, we want to choose one
698 // that stands a chance of working and this one probably does not.
699 //record_bias( _phc._lrgs, lr1, lr2 );
700 return false; // To hard to find all interferences
701 }
702 b2 = _phc._cfg._bbs[b2->pred(1)->_idx];
703 }
704 }
706 // Union the two interference sets together into '_ulr'
707 uint reg_degree = _ulr.lrg_union( lr1, lr2, rm_size, _phc._ifg, rm );
709 if( reg_degree >= rm_size ) {
710 record_bias( _phc._ifg, lr1, lr2 );
711 return false;
712 }
714 // Now I need to compute all the interferences between dst_copy and
715 // src_copy. I'm not willing visit the entire interference graph, so
716 // I limit my search to things in dst_copy's block or in a straight
717 // line of previous blocks. I give up at merge points or when I get
718 // more interferences than my degree. I can stop when I find src_copy.
719 if( dst_copy != src_copy ) {
720 reg_degree = compute_separating_interferences(dst_copy, src_copy, b, bindex, rm, rm_size, reg_degree, lr1, lr2 );
721 if( reg_degree == max_juint ) {
722 record_bias( _phc._ifg, lr1, lr2 );
723 return false;
724 }
725 } // End of if dst_copy & src_copy are different
728 // ---- THE COMBINED LRG IS COLORABLE ----
730 // YEAH - Now coalesce this copy away
731 assert( lrgs(lr1).num_regs() == lrgs(lr2).num_regs(), "" );
733 IndexSet *n_lr1 = _phc._ifg->neighbors(lr1);
734 IndexSet *n_lr2 = _phc._ifg->neighbors(lr2);
736 // Update the interference graph
737 update_ifg(lr1, lr2, n_lr1, n_lr2);
739 _ulr.remove(lr1);
741 // Uncomment the following code to trace Coalescing in great detail.
742 //
743 //if (false) {
744 // tty->cr();
745 // tty->print_cr("#######################################");
746 // tty->print_cr("union %d and %d", lr1, lr2);
747 // n_lr1->dump();
748 // n_lr2->dump();
749 // tty->print_cr("resulting set is");
750 // _ulr.dump();
751 //}
753 // Replace n_lr1 with the new combined live range. _ulr will use
754 // n_lr1's old memory on the next iteration. n_lr2 is cleared to
755 // send its internal memory to the free list.
756 _ulr.swap(n_lr1);
757 _ulr.clear();
758 n_lr2->clear();
760 lrgs(lr1).set_degree( _phc._ifg->effective_degree(lr1) );
761 lrgs(lr2).set_degree( 0 );
763 // Join live ranges. Merge larger into smaller. Union lr2 into lr1 in the
764 // union-find tree
765 union_helper( lr1_node, lr2_node, lr1, lr2, src_def, dst_copy, src_copy, b, bindex );
766 // Combine register restrictions
767 lrgs(lr1).set_mask(rm);
768 lrgs(lr1).compute_set_mask_size();
769 lrgs(lr1)._cost += lrgs(lr2)._cost;
770 lrgs(lr1)._area += lrgs(lr2)._area;
772 // While its uncommon to successfully coalesce live ranges that started out
773 // being not-lo-degree, it can happen. In any case the combined coalesced
774 // live range better Simplify nicely.
775 lrgs(lr1)._was_lo = 1;
777 // kinda expensive to do all the time
778 //tty->print_cr("warning: slow verify happening");
779 //_phc._ifg->verify( &_phc );
780 return true;
781 }
783 //------------------------------coalesce---------------------------------------
784 // Conservative (but pessimistic) copy coalescing of a single block
785 void PhaseConservativeCoalesce::coalesce( Block *b ) {
786 // Bail out on infrequent blocks
787 if( b->is_uncommon(_phc._cfg._bbs) )
788 return;
789 // Check this block for copies.
790 for( uint i = 1; i<b->end_idx(); i++ ) {
791 // Check for actual copies on inputs. Coalesce a copy into its
792 // input if use and copy's input are compatible.
793 Node *copy1 = b->_nodes[i];
794 uint idx1 = copy1->is_Copy();
795 if( !idx1 ) continue; // Not a copy
797 if( copy_copy(copy1,copy1,b,i) ) {
798 i--; // Retry, same location in block
799 PhaseChaitin::_conserv_coalesce++; // Collect stats on success
800 continue;
801 }
802 }
803 }