Thu, 08 Apr 2010 10:55:40 +0200
6941529: SharedRuntime::raw_exception_handler_for_return_address must reset thread MethodHandle flag
Summary: During testing a bug was hit when an exception returned to the interpreter and the SP was wrong.
Reviewed-by: kvn, never
1 /*
2 * Copyright 2003-2010 Sun Microsystems, Inc. All Rights Reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 * have any questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_interpreter_x86_64.cpp.incl"
28 #define __ _masm->
30 #ifndef CC_INTERP
32 const int method_offset = frame::interpreter_frame_method_offset * wordSize;
33 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize;
34 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize;
36 //-----------------------------------------------------------------------------
38 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
39 address entry = __ pc();
41 #ifdef ASSERT
42 {
43 Label L;
44 __ lea(rax, Address(rbp,
45 frame::interpreter_frame_monitor_block_top_offset *
46 wordSize));
47 __ cmpptr(rax, rsp); // rax = maximal rsp for current rbp (stack
48 // grows negative)
49 __ jcc(Assembler::aboveEqual, L); // check if frame is complete
50 __ stop ("interpreter frame not set up");
51 __ bind(L);
52 }
53 #endif // ASSERT
54 // Restore bcp under the assumption that the current frame is still
55 // interpreted
56 __ restore_bcp();
58 // expression stack must be empty before entering the VM if an
59 // exception happened
60 __ empty_expression_stack();
61 // throw exception
62 __ call_VM(noreg,
63 CAST_FROM_FN_PTR(address,
64 InterpreterRuntime::throw_StackOverflowError));
65 return entry;
66 }
68 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(
69 const char* name) {
70 address entry = __ pc();
71 // expression stack must be empty before entering the VM if an
72 // exception happened
73 __ empty_expression_stack();
74 // setup parameters
75 // ??? convention: expect aberrant index in register ebx
76 __ lea(c_rarg1, ExternalAddress((address)name));
77 __ call_VM(noreg,
78 CAST_FROM_FN_PTR(address,
79 InterpreterRuntime::
80 throw_ArrayIndexOutOfBoundsException),
81 c_rarg1, rbx);
82 return entry;
83 }
85 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
86 address entry = __ pc();
88 // object is at TOS
89 __ pop(c_rarg1);
91 // expression stack must be empty before entering the VM if an
92 // exception happened
93 __ empty_expression_stack();
95 __ call_VM(noreg,
96 CAST_FROM_FN_PTR(address,
97 InterpreterRuntime::
98 throw_ClassCastException),
99 c_rarg1);
100 return entry;
101 }
103 // Arguments are: required type at TOS+8, failing object (or NULL) at TOS+4.
104 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
105 address entry = __ pc();
107 __ pop(c_rarg2); // failing object is at TOS
108 __ pop(c_rarg1); // required type is at TOS+8
110 __ verify_oop(c_rarg1);
111 __ verify_oop(c_rarg2);
113 // Various method handle types use interpreter registers as temps.
114 __ restore_bcp();
115 __ restore_locals();
117 // Expression stack must be empty before entering the VM for an exception.
118 __ empty_expression_stack();
120 __ call_VM(noreg,
121 CAST_FROM_FN_PTR(address,
122 InterpreterRuntime::throw_WrongMethodTypeException),
123 // pass required type, failing object (or NULL)
124 c_rarg1, c_rarg2);
125 return entry;
126 }
128 address TemplateInterpreterGenerator::generate_exception_handler_common(
129 const char* name, const char* message, bool pass_oop) {
130 assert(!pass_oop || message == NULL, "either oop or message but not both");
131 address entry = __ pc();
132 if (pass_oop) {
133 // object is at TOS
134 __ pop(c_rarg2);
135 }
136 // expression stack must be empty before entering the VM if an
137 // exception happened
138 __ empty_expression_stack();
139 // setup parameters
140 __ lea(c_rarg1, ExternalAddress((address)name));
141 if (pass_oop) {
142 __ call_VM(rax, CAST_FROM_FN_PTR(address,
143 InterpreterRuntime::
144 create_klass_exception),
145 c_rarg1, c_rarg2);
146 } else {
147 // kind of lame ExternalAddress can't take NULL because
148 // external_word_Relocation will assert.
149 if (message != NULL) {
150 __ lea(c_rarg2, ExternalAddress((address)message));
151 } else {
152 __ movptr(c_rarg2, NULL_WORD);
153 }
154 __ call_VM(rax,
155 CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception),
156 c_rarg1, c_rarg2);
157 }
158 // throw exception
159 __ jump(ExternalAddress(Interpreter::throw_exception_entry()));
160 return entry;
161 }
164 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
165 address entry = __ pc();
166 // NULL last_sp until next java call
167 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
168 __ dispatch_next(state);
169 return entry;
170 }
173 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state,
174 int step) {
176 // amd64 doesn't need to do anything special about compiled returns
177 // to the interpreter so the code that exists on x86 to place a sentinel
178 // here and the specialized cleanup code is not needed here.
180 address entry = __ pc();
182 // Restore stack bottom in case i2c adjusted stack
183 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
184 // and NULL it as marker that esp is now tos until next java call
185 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
187 __ restore_bcp();
188 __ restore_locals();
190 Label L_got_cache, L_giant_index;
191 if (EnableInvokeDynamic) {
192 __ cmpb(Address(r13, 0), Bytecodes::_invokedynamic);
193 __ jcc(Assembler::equal, L_giant_index);
194 }
195 __ get_cache_and_index_at_bcp(rbx, rcx, 1, false);
196 __ bind(L_got_cache);
197 __ movl(rbx, Address(rbx, rcx,
198 Address::times_ptr,
199 in_bytes(constantPoolCacheOopDesc::base_offset()) +
200 3 * wordSize));
201 __ andl(rbx, 0xFF);
202 if (TaggedStackInterpreter) __ shll(rbx, 1); // 2 slots per parameter.
203 __ lea(rsp, Address(rsp, rbx, Address::times_8));
204 __ dispatch_next(state, step);
206 // out of the main line of code...
207 if (EnableInvokeDynamic) {
208 __ bind(L_giant_index);
209 __ get_cache_and_index_at_bcp(rbx, rcx, 1, true);
210 __ jmp(L_got_cache);
211 }
213 return entry;
214 }
217 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state,
218 int step) {
219 address entry = __ pc();
220 // NULL last_sp until next java call
221 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
222 __ restore_bcp();
223 __ restore_locals();
224 // handle exceptions
225 {
226 Label L;
227 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
228 __ jcc(Assembler::zero, L);
229 __ call_VM(noreg,
230 CAST_FROM_FN_PTR(address,
231 InterpreterRuntime::throw_pending_exception));
232 __ should_not_reach_here();
233 __ bind(L);
234 }
235 __ dispatch_next(state, step);
236 return entry;
237 }
239 int AbstractInterpreter::BasicType_as_index(BasicType type) {
240 int i = 0;
241 switch (type) {
242 case T_BOOLEAN: i = 0; break;
243 case T_CHAR : i = 1; break;
244 case T_BYTE : i = 2; break;
245 case T_SHORT : i = 3; break;
246 case T_INT : i = 4; break;
247 case T_LONG : i = 5; break;
248 case T_VOID : i = 6; break;
249 case T_FLOAT : i = 7; break;
250 case T_DOUBLE : i = 8; break;
251 case T_OBJECT : i = 9; break;
252 case T_ARRAY : i = 9; break;
253 default : ShouldNotReachHere();
254 }
255 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers,
256 "index out of bounds");
257 return i;
258 }
261 address TemplateInterpreterGenerator::generate_result_handler_for(
262 BasicType type) {
263 address entry = __ pc();
264 switch (type) {
265 case T_BOOLEAN: __ c2bool(rax); break;
266 case T_CHAR : __ movzwl(rax, rax); break;
267 case T_BYTE : __ sign_extend_byte(rax); break;
268 case T_SHORT : __ sign_extend_short(rax); break;
269 case T_INT : /* nothing to do */ break;
270 case T_LONG : /* nothing to do */ break;
271 case T_VOID : /* nothing to do */ break;
272 case T_FLOAT : /* nothing to do */ break;
273 case T_DOUBLE : /* nothing to do */ break;
274 case T_OBJECT :
275 // retrieve result from frame
276 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize));
277 // and verify it
278 __ verify_oop(rax);
279 break;
280 default : ShouldNotReachHere();
281 }
282 __ ret(0); // return from result handler
283 return entry;
284 }
286 address TemplateInterpreterGenerator::generate_safept_entry_for(
287 TosState state,
288 address runtime_entry) {
289 address entry = __ pc();
290 __ push(state);
291 __ call_VM(noreg, runtime_entry);
292 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos));
293 return entry;
294 }
298 // Helpers for commoning out cases in the various type of method entries.
299 //
302 // increment invocation count & check for overflow
303 //
304 // Note: checking for negative value instead of overflow
305 // so we have a 'sticky' overflow test
306 //
307 // rbx: method
308 // ecx: invocation counter
309 //
310 void InterpreterGenerator::generate_counter_incr(
311 Label* overflow,
312 Label* profile_method,
313 Label* profile_method_continue) {
315 const Address invocation_counter(rbx,
316 methodOopDesc::invocation_counter_offset() +
317 InvocationCounter::counter_offset());
318 const Address backedge_counter(rbx,
319 methodOopDesc::backedge_counter_offset() +
320 InvocationCounter::counter_offset());
322 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
323 __ incrementl(Address(rbx,
324 methodOopDesc::interpreter_invocation_counter_offset()));
325 }
326 // Update standard invocation counters
327 __ movl(rax, backedge_counter); // load backedge counter
329 __ incrementl(rcx, InvocationCounter::count_increment);
330 __ andl(rax, InvocationCounter::count_mask_value); // mask out the
331 // status bits
333 __ movl(invocation_counter, rcx); // save invocation count
334 __ addl(rcx, rax); // add both counters
336 // profile_method is non-null only for interpreted method so
337 // profile_method != NULL == !native_call
339 if (ProfileInterpreter && profile_method != NULL) {
340 // Test to see if we should create a method data oop
341 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit));
342 __ jcc(Assembler::less, *profile_method_continue);
344 // if no method data exists, go to profile_method
345 __ test_method_data_pointer(rax, *profile_method);
346 }
348 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit));
349 __ jcc(Assembler::aboveEqual, *overflow);
350 }
352 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) {
354 // Asm interpreter on entry
355 // r14 - locals
356 // r13 - bcp
357 // rbx - method
358 // edx - cpool --- DOES NOT APPEAR TO BE TRUE
359 // rbp - interpreter frame
361 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ]
362 // Everything as it was on entry
363 // rdx is not restored. Doesn't appear to really be set.
365 const Address size_of_parameters(rbx,
366 methodOopDesc::size_of_parameters_offset());
368 // InterpreterRuntime::frequency_counter_overflow takes two
369 // arguments, the first (thread) is passed by call_VM, the second
370 // indicates if the counter overflow occurs at a backwards branch
371 // (NULL bcp). We pass zero for it. The call returns the address
372 // of the verified entry point for the method or NULL if the
373 // compilation did not complete (either went background or bailed
374 // out).
375 __ movl(c_rarg1, 0);
376 __ call_VM(noreg,
377 CAST_FROM_FN_PTR(address,
378 InterpreterRuntime::frequency_counter_overflow),
379 c_rarg1);
381 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
382 // Preserve invariant that r13/r14 contain bcp/locals of sender frame
383 // and jump to the interpreted entry.
384 __ jmp(*do_continue, relocInfo::none);
385 }
387 // See if we've got enough room on the stack for locals plus overhead.
388 // The expression stack grows down incrementally, so the normal guard
389 // page mechanism will work for that.
390 //
391 // NOTE: Since the additional locals are also always pushed (wasn't
392 // obvious in generate_method_entry) so the guard should work for them
393 // too.
394 //
395 // Args:
396 // rdx: number of additional locals this frame needs (what we must check)
397 // rbx: methodOop
398 //
399 // Kills:
400 // rax
401 void InterpreterGenerator::generate_stack_overflow_check(void) {
403 // monitor entry size: see picture of stack set
404 // (generate_method_entry) and frame_amd64.hpp
405 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
407 // total overhead size: entry_size + (saved rbp through expr stack
408 // bottom). be sure to change this if you add/subtract anything
409 // to/from the overhead area
410 const int overhead_size =
411 -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size;
413 const int page_size = os::vm_page_size();
415 Label after_frame_check;
417 // see if the frame is greater than one page in size. If so,
418 // then we need to verify there is enough stack space remaining
419 // for the additional locals.
420 __ cmpl(rdx, (page_size - overhead_size) / Interpreter::stackElementSize());
421 __ jcc(Assembler::belowEqual, after_frame_check);
423 // compute rsp as if this were going to be the last frame on
424 // the stack before the red zone
426 const Address stack_base(r15_thread, Thread::stack_base_offset());
427 const Address stack_size(r15_thread, Thread::stack_size_offset());
429 // locals + overhead, in bytes
430 __ mov(rax, rdx);
431 __ shlptr(rax, Interpreter::logStackElementSize()); // 2 slots per parameter.
432 __ addptr(rax, overhead_size);
434 #ifdef ASSERT
435 Label stack_base_okay, stack_size_okay;
436 // verify that thread stack base is non-zero
437 __ cmpptr(stack_base, (int32_t)NULL_WORD);
438 __ jcc(Assembler::notEqual, stack_base_okay);
439 __ stop("stack base is zero");
440 __ bind(stack_base_okay);
441 // verify that thread stack size is non-zero
442 __ cmpptr(stack_size, 0);
443 __ jcc(Assembler::notEqual, stack_size_okay);
444 __ stop("stack size is zero");
445 __ bind(stack_size_okay);
446 #endif
448 // Add stack base to locals and subtract stack size
449 __ addptr(rax, stack_base);
450 __ subptr(rax, stack_size);
452 // Use the maximum number of pages we might bang.
453 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages :
454 (StackRedPages+StackYellowPages);
456 // add in the red and yellow zone sizes
457 __ addptr(rax, max_pages * page_size);
459 // check against the current stack bottom
460 __ cmpptr(rsp, rax);
461 __ jcc(Assembler::above, after_frame_check);
463 __ pop(rax); // get return address
464 __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry()));
466 // all done with frame size check
467 __ bind(after_frame_check);
468 }
470 // Allocate monitor and lock method (asm interpreter)
471 //
472 // Args:
473 // rbx: methodOop
474 // r14: locals
475 //
476 // Kills:
477 // rax
478 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs)
479 // rscratch1, rscratch2 (scratch regs)
480 void InterpreterGenerator::lock_method(void) {
481 // synchronize method
482 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
483 const Address monitor_block_top(
484 rbp,
485 frame::interpreter_frame_monitor_block_top_offset * wordSize);
486 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
488 #ifdef ASSERT
489 {
490 Label L;
491 __ movl(rax, access_flags);
492 __ testl(rax, JVM_ACC_SYNCHRONIZED);
493 __ jcc(Assembler::notZero, L);
494 __ stop("method doesn't need synchronization");
495 __ bind(L);
496 }
497 #endif // ASSERT
499 // get synchronization object
500 {
501 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
502 Klass::java_mirror_offset_in_bytes();
503 Label done;
504 __ movl(rax, access_flags);
505 __ testl(rax, JVM_ACC_STATIC);
506 // get receiver (assume this is frequent case)
507 __ movptr(rax, Address(r14, Interpreter::local_offset_in_bytes(0)));
508 __ jcc(Assembler::zero, done);
509 __ movptr(rax, Address(rbx, methodOopDesc::constants_offset()));
510 __ movptr(rax, Address(rax,
511 constantPoolOopDesc::pool_holder_offset_in_bytes()));
512 __ movptr(rax, Address(rax, mirror_offset));
514 #ifdef ASSERT
515 {
516 Label L;
517 __ testptr(rax, rax);
518 __ jcc(Assembler::notZero, L);
519 __ stop("synchronization object is NULL");
520 __ bind(L);
521 }
522 #endif // ASSERT
524 __ bind(done);
525 }
527 // add space for monitor & lock
528 __ subptr(rsp, entry_size); // add space for a monitor entry
529 __ movptr(monitor_block_top, rsp); // set new monitor block top
530 // store object
531 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax);
532 __ movptr(c_rarg1, rsp); // object address
533 __ lock_object(c_rarg1);
534 }
536 // Generate a fixed interpreter frame. This is identical setup for
537 // interpreted methods and for native methods hence the shared code.
538 //
539 // Args:
540 // rax: return address
541 // rbx: methodOop
542 // r14: pointer to locals
543 // r13: sender sp
544 // rdx: cp cache
545 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
546 // initialize fixed part of activation frame
547 __ push(rax); // save return address
548 __ enter(); // save old & set new rbp
549 __ push(r13); // set sender sp
550 __ push((int)NULL_WORD); // leave last_sp as null
551 __ movptr(r13, Address(rbx, methodOopDesc::const_offset())); // get constMethodOop
552 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
553 __ push(rbx); // save methodOop
554 if (ProfileInterpreter) {
555 Label method_data_continue;
556 __ movptr(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
557 __ testptr(rdx, rdx);
558 __ jcc(Assembler::zero, method_data_continue);
559 __ addptr(rdx, in_bytes(methodDataOopDesc::data_offset()));
560 __ bind(method_data_continue);
561 __ push(rdx); // set the mdp (method data pointer)
562 } else {
563 __ push(0);
564 }
566 __ movptr(rdx, Address(rbx, methodOopDesc::constants_offset()));
567 __ movptr(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes()));
568 __ push(rdx); // set constant pool cache
569 __ push(r14); // set locals pointer
570 if (native_call) {
571 __ push(0); // no bcp
572 } else {
573 __ push(r13); // set bcp
574 }
575 __ push(0); // reserve word for pointer to expression stack bottom
576 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom
577 }
579 // End of helpers
581 // Various method entries
582 //------------------------------------------------------------------------------------------------------------------------
583 //
584 //
586 // Call an accessor method (assuming it is resolved, otherwise drop
587 // into vanilla (slow path) entry
588 address InterpreterGenerator::generate_accessor_entry(void) {
589 // rbx: methodOop
591 // r13: senderSP must preserver for slow path, set SP to it on fast path
593 address entry_point = __ pc();
594 Label xreturn_path;
596 // do fastpath for resolved accessor methods
597 if (UseFastAccessorMethods) {
598 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites
599 // thereof; parameter size = 1
600 // Note: We can only use this code if the getfield has been resolved
601 // and if we don't have a null-pointer exception => check for
602 // these conditions first and use slow path if necessary.
603 Label slow_path;
604 // If we need a safepoint check, generate full interpreter entry.
605 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
606 SafepointSynchronize::_not_synchronized);
608 __ jcc(Assembler::notEqual, slow_path);
609 // rbx: method
610 __ movptr(rax, Address(rsp, wordSize));
612 // check if local 0 != NULL and read field
613 __ testptr(rax, rax);
614 __ jcc(Assembler::zero, slow_path);
616 __ movptr(rdi, Address(rbx, methodOopDesc::constants_offset()));
617 // read first instruction word and extract bytecode @ 1 and index @ 2
618 __ movptr(rdx, Address(rbx, methodOopDesc::const_offset()));
619 __ movl(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
620 // Shift codes right to get the index on the right.
621 // The bytecode fetched looks like <index><0xb4><0x2a>
622 __ shrl(rdx, 2 * BitsPerByte);
623 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size())));
624 __ movptr(rdi, Address(rdi, constantPoolOopDesc::cache_offset_in_bytes()));
626 // rax: local 0
627 // rbx: method
628 // rdx: constant pool cache index
629 // rdi: constant pool cache
631 // check if getfield has been resolved and read constant pool cache entry
632 // check the validity of the cache entry by testing whether _indices field
633 // contains Bytecode::_getfield in b1 byte.
634 assert(in_words(ConstantPoolCacheEntry::size()) == 4,
635 "adjust shift below");
636 __ movl(rcx,
637 Address(rdi,
638 rdx,
639 Address::times_8,
640 constantPoolCacheOopDesc::base_offset() +
641 ConstantPoolCacheEntry::indices_offset()));
642 __ shrl(rcx, 2 * BitsPerByte);
643 __ andl(rcx, 0xFF);
644 __ cmpl(rcx, Bytecodes::_getfield);
645 __ jcc(Assembler::notEqual, slow_path);
647 // Note: constant pool entry is not valid before bytecode is resolved
648 __ movptr(rcx,
649 Address(rdi,
650 rdx,
651 Address::times_8,
652 constantPoolCacheOopDesc::base_offset() +
653 ConstantPoolCacheEntry::f2_offset()));
654 // edx: flags
655 __ movl(rdx,
656 Address(rdi,
657 rdx,
658 Address::times_8,
659 constantPoolCacheOopDesc::base_offset() +
660 ConstantPoolCacheEntry::flags_offset()));
662 Label notObj, notInt, notByte, notShort;
663 const Address field_address(rax, rcx, Address::times_1);
665 // Need to differentiate between igetfield, agetfield, bgetfield etc.
666 // because they are different sizes.
667 // Use the type from the constant pool cache
668 __ shrl(rdx, ConstantPoolCacheEntry::tosBits);
669 // Make sure we don't need to mask edx for tosBits after the above shift
670 ConstantPoolCacheEntry::verify_tosBits();
672 __ cmpl(rdx, atos);
673 __ jcc(Assembler::notEqual, notObj);
674 // atos
675 __ load_heap_oop(rax, field_address);
676 __ jmp(xreturn_path);
678 __ bind(notObj);
679 __ cmpl(rdx, itos);
680 __ jcc(Assembler::notEqual, notInt);
681 // itos
682 __ movl(rax, field_address);
683 __ jmp(xreturn_path);
685 __ bind(notInt);
686 __ cmpl(rdx, btos);
687 __ jcc(Assembler::notEqual, notByte);
688 // btos
689 __ load_signed_byte(rax, field_address);
690 __ jmp(xreturn_path);
692 __ bind(notByte);
693 __ cmpl(rdx, stos);
694 __ jcc(Assembler::notEqual, notShort);
695 // stos
696 __ load_signed_short(rax, field_address);
697 __ jmp(xreturn_path);
699 __ bind(notShort);
700 #ifdef ASSERT
701 Label okay;
702 __ cmpl(rdx, ctos);
703 __ jcc(Assembler::equal, okay);
704 __ stop("what type is this?");
705 __ bind(okay);
706 #endif
707 // ctos
708 __ load_unsigned_short(rax, field_address);
710 __ bind(xreturn_path);
712 // _ireturn/_areturn
713 __ pop(rdi);
714 __ mov(rsp, r13);
715 __ jmp(rdi);
716 __ ret(0);
718 // generate a vanilla interpreter entry as the slow path
719 __ bind(slow_path);
720 (void) generate_normal_entry(false);
721 } else {
722 (void) generate_normal_entry(false);
723 }
725 return entry_point;
726 }
728 // Interpreter stub for calling a native method. (asm interpreter)
729 // This sets up a somewhat different looking stack for calling the
730 // native method than the typical interpreter frame setup.
731 address InterpreterGenerator::generate_native_entry(bool synchronized) {
732 // determine code generation flags
733 bool inc_counter = UseCompiler || CountCompiledCalls;
735 // rbx: methodOop
736 // r13: sender sp
738 address entry_point = __ pc();
740 const Address size_of_parameters(rbx, methodOopDesc::
741 size_of_parameters_offset());
742 const Address invocation_counter(rbx, methodOopDesc::
743 invocation_counter_offset() +
744 InvocationCounter::counter_offset());
745 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
747 // get parameter size (always needed)
748 __ load_unsigned_short(rcx, size_of_parameters);
750 // native calls don't need the stack size check since they have no
751 // expression stack and the arguments are already on the stack and
752 // we only add a handful of words to the stack
754 // rbx: methodOop
755 // rcx: size of parameters
756 // r13: sender sp
757 __ pop(rax); // get return address
759 // for natives the size of locals is zero
761 // compute beginning of parameters (r14)
762 if (TaggedStackInterpreter) __ shll(rcx, 1); // 2 slots per parameter.
763 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
765 // add 2 zero-initialized slots for native calls
766 // initialize result_handler slot
767 __ push((int) NULL_WORD);
768 // slot for oop temp
769 // (static native method holder mirror/jni oop result)
770 __ push((int) NULL_WORD);
772 if (inc_counter) {
773 __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
774 }
776 // initialize fixed part of activation frame
777 generate_fixed_frame(true);
779 // make sure method is native & not abstract
780 #ifdef ASSERT
781 __ movl(rax, access_flags);
782 {
783 Label L;
784 __ testl(rax, JVM_ACC_NATIVE);
785 __ jcc(Assembler::notZero, L);
786 __ stop("tried to execute non-native method as native");
787 __ bind(L);
788 }
789 {
790 Label L;
791 __ testl(rax, JVM_ACC_ABSTRACT);
792 __ jcc(Assembler::zero, L);
793 __ stop("tried to execute abstract method in interpreter");
794 __ bind(L);
795 }
796 #endif
798 // Since at this point in the method invocation the exception handler
799 // would try to exit the monitor of synchronized methods which hasn't
800 // been entered yet, we set the thread local variable
801 // _do_not_unlock_if_synchronized to true. The remove_activation will
802 // check this flag.
804 const Address do_not_unlock_if_synchronized(r15_thread,
805 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
806 __ movbool(do_not_unlock_if_synchronized, true);
808 // increment invocation count & check for overflow
809 Label invocation_counter_overflow;
810 if (inc_counter) {
811 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
812 }
814 Label continue_after_compile;
815 __ bind(continue_after_compile);
817 bang_stack_shadow_pages(true);
819 // reset the _do_not_unlock_if_synchronized flag
820 __ movbool(do_not_unlock_if_synchronized, false);
822 // check for synchronized methods
823 // Must happen AFTER invocation_counter check and stack overflow check,
824 // so method is not locked if overflows.
825 if (synchronized) {
826 lock_method();
827 } else {
828 // no synchronization necessary
829 #ifdef ASSERT
830 {
831 Label L;
832 __ movl(rax, access_flags);
833 __ testl(rax, JVM_ACC_SYNCHRONIZED);
834 __ jcc(Assembler::zero, L);
835 __ stop("method needs synchronization");
836 __ bind(L);
837 }
838 #endif
839 }
841 // start execution
842 #ifdef ASSERT
843 {
844 Label L;
845 const Address monitor_block_top(rbp,
846 frame::interpreter_frame_monitor_block_top_offset * wordSize);
847 __ movptr(rax, monitor_block_top);
848 __ cmpptr(rax, rsp);
849 __ jcc(Assembler::equal, L);
850 __ stop("broken stack frame setup in interpreter");
851 __ bind(L);
852 }
853 #endif
855 // jvmti support
856 __ notify_method_entry();
858 // work registers
859 const Register method = rbx;
860 const Register t = r11;
862 // allocate space for parameters
863 __ get_method(method);
864 __ verify_oop(method);
865 __ load_unsigned_short(t,
866 Address(method,
867 methodOopDesc::size_of_parameters_offset()));
868 __ shll(t, Interpreter::logStackElementSize());
870 __ subptr(rsp, t);
871 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
872 __ andptr(rsp, -16); // must be 16 byte boundary (see amd64 ABI)
874 // get signature handler
875 {
876 Label L;
877 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
878 __ testptr(t, t);
879 __ jcc(Assembler::notZero, L);
880 __ call_VM(noreg,
881 CAST_FROM_FN_PTR(address,
882 InterpreterRuntime::prepare_native_call),
883 method);
884 __ get_method(method);
885 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
886 __ bind(L);
887 }
889 // call signature handler
890 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == r14,
891 "adjust this code");
892 assert(InterpreterRuntime::SignatureHandlerGenerator::to() == rsp,
893 "adjust this code");
894 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == rscratch1,
895 "adjust this code");
897 // The generated handlers do not touch RBX (the method oop).
898 // However, large signatures cannot be cached and are generated
899 // each time here. The slow-path generator can do a GC on return,
900 // so we must reload it after the call.
901 __ call(t);
902 __ get_method(method); // slow path can do a GC, reload RBX
905 // result handler is in rax
906 // set result handler
907 __ movptr(Address(rbp,
908 (frame::interpreter_frame_result_handler_offset) * wordSize),
909 rax);
911 // pass mirror handle if static call
912 {
913 Label L;
914 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
915 Klass::java_mirror_offset_in_bytes();
916 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
917 __ testl(t, JVM_ACC_STATIC);
918 __ jcc(Assembler::zero, L);
919 // get mirror
920 __ movptr(t, Address(method, methodOopDesc::constants_offset()));
921 __ movptr(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes()));
922 __ movptr(t, Address(t, mirror_offset));
923 // copy mirror into activation frame
924 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize),
925 t);
926 // pass handle to mirror
927 __ lea(c_rarg1,
928 Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize));
929 __ bind(L);
930 }
932 // get native function entry point
933 {
934 Label L;
935 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
936 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry());
937 __ movptr(rscratch2, unsatisfied.addr());
938 __ cmpptr(rax, rscratch2);
939 __ jcc(Assembler::notEqual, L);
940 __ call_VM(noreg,
941 CAST_FROM_FN_PTR(address,
942 InterpreterRuntime::prepare_native_call),
943 method);
944 __ get_method(method);
945 __ verify_oop(method);
946 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
947 __ bind(L);
948 }
950 // pass JNIEnv
951 __ lea(c_rarg0, Address(r15_thread, JavaThread::jni_environment_offset()));
953 // It is enough that the pc() points into the right code
954 // segment. It does not have to be the correct return pc.
955 __ set_last_Java_frame(rsp, rbp, (address) __ pc());
957 // change thread state
958 #ifdef ASSERT
959 {
960 Label L;
961 __ movl(t, Address(r15_thread, JavaThread::thread_state_offset()));
962 __ cmpl(t, _thread_in_Java);
963 __ jcc(Assembler::equal, L);
964 __ stop("Wrong thread state in native stub");
965 __ bind(L);
966 }
967 #endif
969 // Change state to native
971 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
972 _thread_in_native);
974 // Call the native method.
975 __ call(rax);
976 // result potentially in rax or xmm0
978 // Depending on runtime options, either restore the MXCSR
979 // register after returning from the JNI Call or verify that
980 // it wasn't changed during -Xcheck:jni.
981 if (RestoreMXCSROnJNICalls) {
982 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
983 }
984 else if (CheckJNICalls) {
985 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::x86::verify_mxcsr_entry())));
986 }
988 // NOTE: The order of these pushes is known to frame::interpreter_frame_result
989 // in order to extract the result of a method call. If the order of these
990 // pushes change or anything else is added to the stack then the code in
991 // interpreter_frame_result must also change.
993 __ push(dtos);
994 __ push(ltos);
996 // change thread state
997 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
998 _thread_in_native_trans);
1000 if (os::is_MP()) {
1001 if (UseMembar) {
1002 // Force this write out before the read below
1003 __ membar(Assembler::Membar_mask_bits(
1004 Assembler::LoadLoad | Assembler::LoadStore |
1005 Assembler::StoreLoad | Assembler::StoreStore));
1006 } else {
1007 // Write serialization page so VM thread can do a pseudo remote membar.
1008 // We use the current thread pointer to calculate a thread specific
1009 // offset to write to within the page. This minimizes bus traffic
1010 // due to cache line collision.
1011 __ serialize_memory(r15_thread, rscratch2);
1012 }
1013 }
1015 // check for safepoint operation in progress and/or pending suspend requests
1016 {
1017 Label Continue;
1018 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
1019 SafepointSynchronize::_not_synchronized);
1021 Label L;
1022 __ jcc(Assembler::notEqual, L);
1023 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
1024 __ jcc(Assembler::equal, Continue);
1025 __ bind(L);
1027 // Don't use call_VM as it will see a possible pending exception
1028 // and forward it and never return here preventing us from
1029 // clearing _last_native_pc down below. Also can't use
1030 // call_VM_leaf either as it will check to see if r13 & r14 are
1031 // preserved and correspond to the bcp/locals pointers. So we do a
1032 // runtime call by hand.
1033 //
1034 __ mov(c_rarg0, r15_thread);
1035 __ mov(r12, rsp); // remember sp
1036 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1037 __ andptr(rsp, -16); // align stack as required by ABI
1038 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
1039 __ mov(rsp, r12); // restore sp
1040 __ reinit_heapbase();
1041 __ bind(Continue);
1042 }
1044 // change thread state
1045 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
1047 // reset_last_Java_frame
1048 __ reset_last_Java_frame(true, true);
1050 // reset handle block
1051 __ movptr(t, Address(r15_thread, JavaThread::active_handles_offset()));
1052 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
1054 // If result is an oop unbox and store it in frame where gc will see it
1055 // and result handler will pick it up
1057 {
1058 Label no_oop, store_result;
1059 __ lea(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT)));
1060 __ cmpptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize));
1061 __ jcc(Assembler::notEqual, no_oop);
1062 // retrieve result
1063 __ pop(ltos);
1064 __ testptr(rax, rax);
1065 __ jcc(Assembler::zero, store_result);
1066 __ movptr(rax, Address(rax, 0));
1067 __ bind(store_result);
1068 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize), rax);
1069 // keep stack depth as expected by pushing oop which will eventually be discarde
1070 __ push(ltos);
1071 __ bind(no_oop);
1072 }
1075 {
1076 Label no_reguard;
1077 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()),
1078 JavaThread::stack_guard_yellow_disabled);
1079 __ jcc(Assembler::notEqual, no_reguard);
1081 __ pusha(); // XXX only save smashed registers
1082 __ mov(r12, rsp); // remember sp
1083 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1084 __ andptr(rsp, -16); // align stack as required by ABI
1085 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1086 __ mov(rsp, r12); // restore sp
1087 __ popa(); // XXX only restore smashed registers
1088 __ reinit_heapbase();
1090 __ bind(no_reguard);
1091 }
1094 // The method register is junk from after the thread_in_native transition
1095 // until here. Also can't call_VM until the bcp has been
1096 // restored. Need bcp for throwing exception below so get it now.
1097 __ get_method(method);
1098 __ verify_oop(method);
1100 // restore r13 to have legal interpreter frame, i.e., bci == 0 <=>
1101 // r13 == code_base()
1102 __ movptr(r13, Address(method, methodOopDesc::const_offset())); // get constMethodOop
1103 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
1104 // handle exceptions (exception handling will handle unlocking!)
1105 {
1106 Label L;
1107 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
1108 __ jcc(Assembler::zero, L);
1109 // Note: At some point we may want to unify this with the code
1110 // used in call_VM_base(); i.e., we should use the
1111 // StubRoutines::forward_exception code. For now this doesn't work
1112 // here because the rsp is not correctly set at this point.
1113 __ MacroAssembler::call_VM(noreg,
1114 CAST_FROM_FN_PTR(address,
1115 InterpreterRuntime::throw_pending_exception));
1116 __ should_not_reach_here();
1117 __ bind(L);
1118 }
1120 // do unlocking if necessary
1121 {
1122 Label L;
1123 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1124 __ testl(t, JVM_ACC_SYNCHRONIZED);
1125 __ jcc(Assembler::zero, L);
1126 // the code below should be shared with interpreter macro
1127 // assembler implementation
1128 {
1129 Label unlock;
1130 // BasicObjectLock will be first in list, since this is a
1131 // synchronized method. However, need to check that the object
1132 // has not been unlocked by an explicit monitorexit bytecode.
1133 const Address monitor(rbp,
1134 (intptr_t)(frame::interpreter_frame_initial_sp_offset *
1135 wordSize - sizeof(BasicObjectLock)));
1137 // monitor expect in c_rarg1 for slow unlock path
1138 __ lea(c_rarg1, monitor); // address of first monitor
1140 __ movptr(t, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
1141 __ testptr(t, t);
1142 __ jcc(Assembler::notZero, unlock);
1144 // Entry already unlocked, need to throw exception
1145 __ MacroAssembler::call_VM(noreg,
1146 CAST_FROM_FN_PTR(address,
1147 InterpreterRuntime::throw_illegal_monitor_state_exception));
1148 __ should_not_reach_here();
1150 __ bind(unlock);
1151 __ unlock_object(c_rarg1);
1152 }
1153 __ bind(L);
1154 }
1156 // jvmti support
1157 // Note: This must happen _after_ handling/throwing any exceptions since
1158 // the exception handler code notifies the runtime of method exits
1159 // too. If this happens before, method entry/exit notifications are
1160 // not properly paired (was bug - gri 11/22/99).
1161 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI);
1163 // restore potential result in edx:eax, call result handler to
1164 // restore potential result in ST0 & handle result
1166 __ pop(ltos);
1167 __ pop(dtos);
1169 __ movptr(t, Address(rbp,
1170 (frame::interpreter_frame_result_handler_offset) * wordSize));
1171 __ call(t);
1173 // remove activation
1174 __ movptr(t, Address(rbp,
1175 frame::interpreter_frame_sender_sp_offset *
1176 wordSize)); // get sender sp
1177 __ leave(); // remove frame anchor
1178 __ pop(rdi); // get return address
1179 __ mov(rsp, t); // set sp to sender sp
1180 __ jmp(rdi);
1182 if (inc_counter) {
1183 // Handle overflow of counter and compile method
1184 __ bind(invocation_counter_overflow);
1185 generate_counter_overflow(&continue_after_compile);
1186 }
1188 return entry_point;
1189 }
1191 //
1192 // Generic interpreted method entry to (asm) interpreter
1193 //
1194 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1195 // determine code generation flags
1196 bool inc_counter = UseCompiler || CountCompiledCalls;
1198 // ebx: methodOop
1199 // r13: sender sp
1200 address entry_point = __ pc();
1202 const Address size_of_parameters(rbx,
1203 methodOopDesc::size_of_parameters_offset());
1204 const Address size_of_locals(rbx, methodOopDesc::size_of_locals_offset());
1205 const Address invocation_counter(rbx,
1206 methodOopDesc::invocation_counter_offset() +
1207 InvocationCounter::counter_offset());
1208 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
1210 // get parameter size (always needed)
1211 __ load_unsigned_short(rcx, size_of_parameters);
1213 // rbx: methodOop
1214 // rcx: size of parameters
1215 // r13: sender_sp (could differ from sp+wordSize if we were called via c2i )
1217 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words
1218 __ subl(rdx, rcx); // rdx = no. of additional locals
1220 // YYY
1221 // __ incrementl(rdx);
1222 // __ andl(rdx, -2);
1224 // see if we've got enough room on the stack for locals plus overhead.
1225 generate_stack_overflow_check();
1227 // get return address
1228 __ pop(rax);
1230 // compute beginning of parameters (r14)
1231 if (TaggedStackInterpreter) __ shll(rcx, 1); // 2 slots per parameter.
1232 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
1234 // rdx - # of additional locals
1235 // allocate space for locals
1236 // explicitly initialize locals
1237 {
1238 Label exit, loop;
1239 __ testl(rdx, rdx);
1240 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0
1241 __ bind(loop);
1242 if (TaggedStackInterpreter) __ push((int) NULL_WORD); // push tag
1243 __ push((int) NULL_WORD); // initialize local variables
1244 __ decrementl(rdx); // until everything initialized
1245 __ jcc(Assembler::greater, loop);
1246 __ bind(exit);
1247 }
1249 // (pre-)fetch invocation count
1250 if (inc_counter) {
1251 __ movl(rcx, invocation_counter);
1252 }
1253 // initialize fixed part of activation frame
1254 generate_fixed_frame(false);
1256 // make sure method is not native & not abstract
1257 #ifdef ASSERT
1258 __ movl(rax, access_flags);
1259 {
1260 Label L;
1261 __ testl(rax, JVM_ACC_NATIVE);
1262 __ jcc(Assembler::zero, L);
1263 __ stop("tried to execute native method as non-native");
1264 __ bind(L);
1265 }
1266 {
1267 Label L;
1268 __ testl(rax, JVM_ACC_ABSTRACT);
1269 __ jcc(Assembler::zero, L);
1270 __ stop("tried to execute abstract method in interpreter");
1271 __ bind(L);
1272 }
1273 #endif
1275 // Since at this point in the method invocation the exception
1276 // handler would try to exit the monitor of synchronized methods
1277 // which hasn't been entered yet, we set the thread local variable
1278 // _do_not_unlock_if_synchronized to true. The remove_activation
1279 // will check this flag.
1281 const Address do_not_unlock_if_synchronized(r15_thread,
1282 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1283 __ movbool(do_not_unlock_if_synchronized, true);
1285 // increment invocation count & check for overflow
1286 Label invocation_counter_overflow;
1287 Label profile_method;
1288 Label profile_method_continue;
1289 if (inc_counter) {
1290 generate_counter_incr(&invocation_counter_overflow,
1291 &profile_method,
1292 &profile_method_continue);
1293 if (ProfileInterpreter) {
1294 __ bind(profile_method_continue);
1295 }
1296 }
1298 Label continue_after_compile;
1299 __ bind(continue_after_compile);
1301 // check for synchronized interpreted methods
1302 bang_stack_shadow_pages(false);
1304 // reset the _do_not_unlock_if_synchronized flag
1305 __ movbool(do_not_unlock_if_synchronized, false);
1307 // check for synchronized methods
1308 // Must happen AFTER invocation_counter check and stack overflow check,
1309 // so method is not locked if overflows.
1310 if (synchronized) {
1311 // Allocate monitor and lock method
1312 lock_method();
1313 } else {
1314 // no synchronization necessary
1315 #ifdef ASSERT
1316 {
1317 Label L;
1318 __ movl(rax, access_flags);
1319 __ testl(rax, JVM_ACC_SYNCHRONIZED);
1320 __ jcc(Assembler::zero, L);
1321 __ stop("method needs synchronization");
1322 __ bind(L);
1323 }
1324 #endif
1325 }
1327 // start execution
1328 #ifdef ASSERT
1329 {
1330 Label L;
1331 const Address monitor_block_top (rbp,
1332 frame::interpreter_frame_monitor_block_top_offset * wordSize);
1333 __ movptr(rax, monitor_block_top);
1334 __ cmpptr(rax, rsp);
1335 __ jcc(Assembler::equal, L);
1336 __ stop("broken stack frame setup in interpreter");
1337 __ bind(L);
1338 }
1339 #endif
1341 // jvmti support
1342 __ notify_method_entry();
1344 __ dispatch_next(vtos);
1346 // invocation counter overflow
1347 if (inc_counter) {
1348 if (ProfileInterpreter) {
1349 // We have decided to profile this method in the interpreter
1350 __ bind(profile_method);
1352 __ call_VM(noreg,
1353 CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method),
1354 r13, true);
1356 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
1357 __ movptr(rax, Address(rbx,
1358 in_bytes(methodOopDesc::method_data_offset())));
1359 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize),
1360 rax);
1361 __ test_method_data_pointer(rax, profile_method_continue);
1362 __ addptr(rax, in_bytes(methodDataOopDesc::data_offset()));
1363 __ movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize),
1364 rax);
1365 __ jmp(profile_method_continue);
1366 }
1367 // Handle overflow of counter and compile method
1368 __ bind(invocation_counter_overflow);
1369 generate_counter_overflow(&continue_after_compile);
1370 }
1372 return entry_point;
1373 }
1375 // Entry points
1376 //
1377 // Here we generate the various kind of entries into the interpreter.
1378 // The two main entry type are generic bytecode methods and native
1379 // call method. These both come in synchronized and non-synchronized
1380 // versions but the frame layout they create is very similar. The
1381 // other method entry types are really just special purpose entries
1382 // that are really entry and interpretation all in one. These are for
1383 // trivial methods like accessor, empty, or special math methods.
1384 //
1385 // When control flow reaches any of the entry types for the interpreter
1386 // the following holds ->
1387 //
1388 // Arguments:
1389 //
1390 // rbx: methodOop
1391 //
1392 // Stack layout immediately at entry
1393 //
1394 // [ return address ] <--- rsp
1395 // [ parameter n ]
1396 // ...
1397 // [ parameter 1 ]
1398 // [ expression stack ] (caller's java expression stack)
1400 // Assuming that we don't go to one of the trivial specialized entries
1401 // the stack will look like below when we are ready to execute the
1402 // first bytecode (or call the native routine). The register usage
1403 // will be as the template based interpreter expects (see
1404 // interpreter_amd64.hpp).
1405 //
1406 // local variables follow incoming parameters immediately; i.e.
1407 // the return address is moved to the end of the locals).
1408 //
1409 // [ monitor entry ] <--- rsp
1410 // ...
1411 // [ monitor entry ]
1412 // [ expr. stack bottom ]
1413 // [ saved r13 ]
1414 // [ current r14 ]
1415 // [ methodOop ]
1416 // [ saved ebp ] <--- rbp
1417 // [ return address ]
1418 // [ local variable m ]
1419 // ...
1420 // [ local variable 1 ]
1421 // [ parameter n ]
1422 // ...
1423 // [ parameter 1 ] <--- r14
1425 address AbstractInterpreterGenerator::generate_method_entry(
1426 AbstractInterpreter::MethodKind kind) {
1427 // determine code generation flags
1428 bool synchronized = false;
1429 address entry_point = NULL;
1431 switch (kind) {
1432 case Interpreter::zerolocals : break;
1433 case Interpreter::zerolocals_synchronized: synchronized = true; break;
1434 case Interpreter::native : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(false); break;
1435 case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(true); break;
1436 case Interpreter::empty : entry_point = ((InterpreterGenerator*) this)->generate_empty_entry(); break;
1437 case Interpreter::accessor : entry_point = ((InterpreterGenerator*) this)->generate_accessor_entry(); break;
1438 case Interpreter::abstract : entry_point = ((InterpreterGenerator*) this)->generate_abstract_entry(); break;
1439 case Interpreter::method_handle : entry_point = ((InterpreterGenerator*) this)->generate_method_handle_entry();break;
1441 case Interpreter::java_lang_math_sin : // fall thru
1442 case Interpreter::java_lang_math_cos : // fall thru
1443 case Interpreter::java_lang_math_tan : // fall thru
1444 case Interpreter::java_lang_math_abs : // fall thru
1445 case Interpreter::java_lang_math_log : // fall thru
1446 case Interpreter::java_lang_math_log10 : // fall thru
1447 case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*) this)->generate_math_entry(kind); break;
1448 default : ShouldNotReachHere(); break;
1449 }
1451 if (entry_point) {
1452 return entry_point;
1453 }
1455 return ((InterpreterGenerator*) this)->
1456 generate_normal_entry(synchronized);
1457 }
1459 // These should never be compiled since the interpreter will prefer
1460 // the compiled version to the intrinsic version.
1461 bool AbstractInterpreter::can_be_compiled(methodHandle m) {
1462 switch (method_kind(m)) {
1463 case Interpreter::java_lang_math_sin : // fall thru
1464 case Interpreter::java_lang_math_cos : // fall thru
1465 case Interpreter::java_lang_math_tan : // fall thru
1466 case Interpreter::java_lang_math_abs : // fall thru
1467 case Interpreter::java_lang_math_log : // fall thru
1468 case Interpreter::java_lang_math_log10 : // fall thru
1469 case Interpreter::java_lang_math_sqrt :
1470 return false;
1471 default:
1472 return true;
1473 }
1474 }
1476 // How much stack a method activation needs in words.
1477 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1478 const int entry_size = frame::interpreter_frame_monitor_size();
1480 // total overhead size: entry_size + (saved rbp thru expr stack
1481 // bottom). be sure to change this if you add/subtract anything
1482 // to/from the overhead area
1483 const int overhead_size =
1484 -(frame::interpreter_frame_initial_sp_offset) + entry_size;
1486 const int stub_code = frame::entry_frame_after_call_words;
1487 const int extra_stack = methodOopDesc::extra_stack_entries();
1488 const int method_stack = (method->max_locals() + method->max_stack() + extra_stack) *
1489 Interpreter::stackElementWords();
1490 return (overhead_size + method_stack + stub_code);
1491 }
1493 int AbstractInterpreter::layout_activation(methodOop method,
1494 int tempcount,
1495 int popframe_extra_args,
1496 int moncount,
1497 int callee_param_count,
1498 int callee_locals,
1499 frame* caller,
1500 frame* interpreter_frame,
1501 bool is_top_frame) {
1502 // Note: This calculation must exactly parallel the frame setup
1503 // in AbstractInterpreterGenerator::generate_method_entry.
1504 // If interpreter_frame!=NULL, set up the method, locals, and monitors.
1505 // The frame interpreter_frame, if not NULL, is guaranteed to be the
1506 // right size, as determined by a previous call to this method.
1507 // It is also guaranteed to be walkable even though it is in a skeletal state
1509 // fixed size of an interpreter frame:
1510 int max_locals = method->max_locals() * Interpreter::stackElementWords();
1511 int extra_locals = (method->max_locals() - method->size_of_parameters()) *
1512 Interpreter::stackElementWords();
1514 int overhead = frame::sender_sp_offset -
1515 frame::interpreter_frame_initial_sp_offset;
1516 // Our locals were accounted for by the caller (or last_frame_adjust
1517 // on the transistion) Since the callee parameters already account
1518 // for the callee's params we only need to account for the extra
1519 // locals.
1520 int size = overhead +
1521 (callee_locals - callee_param_count)*Interpreter::stackElementWords() +
1522 moncount * frame::interpreter_frame_monitor_size() +
1523 tempcount* Interpreter::stackElementWords() + popframe_extra_args;
1524 if (interpreter_frame != NULL) {
1525 #ifdef ASSERT
1526 if (!EnableMethodHandles)
1527 // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences?
1528 // Probably, since deoptimization doesn't work yet.
1529 assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1530 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)");
1531 #endif
1533 interpreter_frame->interpreter_frame_set_method(method);
1534 // NOTE the difference in using sender_sp and
1535 // interpreter_frame_sender_sp interpreter_frame_sender_sp is
1536 // the original sp of the caller (the unextended_sp) and
1537 // sender_sp is fp+16 XXX
1538 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1;
1540 interpreter_frame->interpreter_frame_set_locals(locals);
1541 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin();
1542 BasicObjectLock* monbot = montop - moncount;
1543 interpreter_frame->interpreter_frame_set_monitor_end(monbot);
1545 // Set last_sp
1546 intptr_t* esp = (intptr_t*) monbot -
1547 tempcount*Interpreter::stackElementWords() -
1548 popframe_extra_args;
1549 interpreter_frame->interpreter_frame_set_last_sp(esp);
1551 // All frames but the initial (oldest) interpreter frame we fill in have
1552 // a value for sender_sp that allows walking the stack but isn't
1553 // truly correct. Correct the value here.
1554 if (extra_locals != 0 &&
1555 interpreter_frame->sender_sp() ==
1556 interpreter_frame->interpreter_frame_sender_sp()) {
1557 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() +
1558 extra_locals);
1559 }
1560 *interpreter_frame->interpreter_frame_cache_addr() =
1561 method->constants()->cache();
1562 }
1563 return size;
1564 }
1566 //-----------------------------------------------------------------------------
1567 // Exceptions
1569 void TemplateInterpreterGenerator::generate_throw_exception() {
1570 // Entry point in previous activation (i.e., if the caller was
1571 // interpreted)
1572 Interpreter::_rethrow_exception_entry = __ pc();
1573 // Restore sp to interpreter_frame_last_sp even though we are going
1574 // to empty the expression stack for the exception processing.
1575 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1576 // rax: exception
1577 // rdx: return address/pc that threw exception
1578 __ restore_bcp(); // r13 points to call/send
1579 __ restore_locals();
1580 __ reinit_heapbase(); // restore r12 as heapbase.
1581 // Entry point for exceptions thrown within interpreter code
1582 Interpreter::_throw_exception_entry = __ pc();
1583 // expression stack is undefined here
1584 // rax: exception
1585 // r13: exception bcp
1586 __ verify_oop(rax);
1587 __ mov(c_rarg1, rax);
1589 // expression stack must be empty before entering the VM in case of
1590 // an exception
1591 __ empty_expression_stack();
1592 // find exception handler address and preserve exception oop
1593 __ call_VM(rdx,
1594 CAST_FROM_FN_PTR(address,
1595 InterpreterRuntime::exception_handler_for_exception),
1596 c_rarg1);
1597 // rax: exception handler entry point
1598 // rdx: preserved exception oop
1599 // r13: bcp for exception handler
1600 __ push_ptr(rdx); // push exception which is now the only value on the stack
1601 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!)
1603 // If the exception is not handled in the current frame the frame is
1604 // removed and the exception is rethrown (i.e. exception
1605 // continuation is _rethrow_exception).
1606 //
1607 // Note: At this point the bci is still the bxi for the instruction
1608 // which caused the exception and the expression stack is
1609 // empty. Thus, for any VM calls at this point, GC will find a legal
1610 // oop map (with empty expression stack).
1612 // In current activation
1613 // tos: exception
1614 // esi: exception bcp
1616 //
1617 // JVMTI PopFrame support
1618 //
1620 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1621 __ empty_expression_stack();
1622 // Set the popframe_processing bit in pending_popframe_condition
1623 // indicating that we are currently handling popframe, so that
1624 // call_VMs that may happen later do not trigger new popframe
1625 // handling cycles.
1626 __ movl(rdx, Address(r15_thread, JavaThread::popframe_condition_offset()));
1627 __ orl(rdx, JavaThread::popframe_processing_bit);
1628 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), rdx);
1630 {
1631 // Check to see whether we are returning to a deoptimized frame.
1632 // (The PopFrame call ensures that the caller of the popped frame is
1633 // either interpreted or compiled and deoptimizes it if compiled.)
1634 // In this case, we can't call dispatch_next() after the frame is
1635 // popped, but instead must save the incoming arguments and restore
1636 // them after deoptimization has occurred.
1637 //
1638 // Note that we don't compare the return PC against the
1639 // deoptimization blob's unpack entry because of the presence of
1640 // adapter frames in C2.
1641 Label caller_not_deoptimized;
1642 __ movptr(c_rarg1, Address(rbp, frame::return_addr_offset * wordSize));
1643 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1644 InterpreterRuntime::interpreter_contains), c_rarg1);
1645 __ testl(rax, rax);
1646 __ jcc(Assembler::notZero, caller_not_deoptimized);
1648 // Compute size of arguments for saving when returning to
1649 // deoptimized caller
1650 __ get_method(rax);
1651 __ load_unsigned_short(rax, Address(rax, in_bytes(methodOopDesc::
1652 size_of_parameters_offset())));
1653 __ shll(rax, Interpreter::logStackElementSize());
1654 __ restore_locals(); // XXX do we need this?
1655 __ subptr(r14, rax);
1656 __ addptr(r14, wordSize);
1657 // Save these arguments
1658 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1659 Deoptimization::
1660 popframe_preserve_args),
1661 r15_thread, rax, r14);
1663 __ remove_activation(vtos, rdx,
1664 /* throw_monitor_exception */ false,
1665 /* install_monitor_exception */ false,
1666 /* notify_jvmdi */ false);
1668 // Inform deoptimization that it is responsible for restoring
1669 // these arguments
1670 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1671 JavaThread::popframe_force_deopt_reexecution_bit);
1673 // Continue in deoptimization handler
1674 __ jmp(rdx);
1676 __ bind(caller_not_deoptimized);
1677 }
1679 __ remove_activation(vtos, rdx, /* rdx result (retaddr) is not used */
1680 /* throw_monitor_exception */ false,
1681 /* install_monitor_exception */ false,
1682 /* notify_jvmdi */ false);
1684 // Finish with popframe handling
1685 // A previous I2C followed by a deoptimization might have moved the
1686 // outgoing arguments further up the stack. PopFrame expects the
1687 // mutations to those outgoing arguments to be preserved and other
1688 // constraints basically require this frame to look exactly as
1689 // though it had previously invoked an interpreted activation with
1690 // no space between the top of the expression stack (current
1691 // last_sp) and the top of stack. Rather than force deopt to
1692 // maintain this kind of invariant all the time we call a small
1693 // fixup routine to move the mutated arguments onto the top of our
1694 // expression stack if necessary.
1695 __ mov(c_rarg1, rsp);
1696 __ movptr(c_rarg2, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1697 // PC must point into interpreter here
1698 __ set_last_Java_frame(noreg, rbp, __ pc());
1699 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), r15_thread, c_rarg1, c_rarg2);
1700 __ reset_last_Java_frame(true, true);
1701 // Restore the last_sp and null it out
1702 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1703 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1705 __ restore_bcp(); // XXX do we need this?
1706 __ restore_locals(); // XXX do we need this?
1707 // The method data pointer was incremented already during
1708 // call profiling. We have to restore the mdp for the current bcp.
1709 if (ProfileInterpreter) {
1710 __ set_method_data_pointer_for_bcp();
1711 }
1713 // Clear the popframe condition flag
1714 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1715 JavaThread::popframe_inactive);
1717 __ dispatch_next(vtos);
1718 // end of PopFrame support
1720 Interpreter::_remove_activation_entry = __ pc();
1722 // preserve exception over this code sequence
1723 __ pop_ptr(rax);
1724 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), rax);
1725 // remove the activation (without doing throws on illegalMonitorExceptions)
1726 __ remove_activation(vtos, rdx, false, true, false);
1727 // restore exception
1728 __ movptr(rax, Address(r15_thread, JavaThread::vm_result_offset()));
1729 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int32_t)NULL_WORD);
1730 __ verify_oop(rax);
1732 // In between activations - previous activation type unknown yet
1733 // compute continuation point - the continuation point expects the
1734 // following registers set up:
1735 //
1736 // rax: exception
1737 // rdx: return address/pc that threw exception
1738 // rsp: expression stack of caller
1739 // rbp: ebp of caller
1740 __ push(rax); // save exception
1741 __ push(rdx); // save return address
1742 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1743 SharedRuntime::exception_handler_for_return_address),
1744 r15_thread, rdx);
1745 __ mov(rbx, rax); // save exception handler
1746 __ pop(rdx); // restore return address
1747 __ pop(rax); // restore exception
1748 // Note that an "issuing PC" is actually the next PC after the call
1749 __ jmp(rbx); // jump to exception
1750 // handler of caller
1751 }
1754 //
1755 // JVMTI ForceEarlyReturn support
1756 //
1757 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1758 address entry = __ pc();
1760 __ restore_bcp();
1761 __ restore_locals();
1762 __ empty_expression_stack();
1763 __ load_earlyret_value(state);
1765 __ movptr(rdx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
1766 Address cond_addr(rdx, JvmtiThreadState::earlyret_state_offset());
1768 // Clear the earlyret state
1769 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive);
1771 __ remove_activation(state, rsi,
1772 false, /* throw_monitor_exception */
1773 false, /* install_monitor_exception */
1774 true); /* notify_jvmdi */
1775 __ jmp(rsi);
1777 return entry;
1778 } // end of ForceEarlyReturn support
1781 //-----------------------------------------------------------------------------
1782 // Helper for vtos entry point generation
1784 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t,
1785 address& bep,
1786 address& cep,
1787 address& sep,
1788 address& aep,
1789 address& iep,
1790 address& lep,
1791 address& fep,
1792 address& dep,
1793 address& vep) {
1794 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1795 Label L;
1796 aep = __ pc(); __ push_ptr(); __ jmp(L);
1797 fep = __ pc(); __ push_f(); __ jmp(L);
1798 dep = __ pc(); __ push_d(); __ jmp(L);
1799 lep = __ pc(); __ push_l(); __ jmp(L);
1800 bep = cep = sep =
1801 iep = __ pc(); __ push_i();
1802 vep = __ pc();
1803 __ bind(L);
1804 generate_and_dispatch(t);
1805 }
1808 //-----------------------------------------------------------------------------
1809 // Generation of individual instructions
1811 // helpers for generate_and_dispatch
1814 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1815 : TemplateInterpreterGenerator(code) {
1816 generate_all(); // down here so it can be "virtual"
1817 }
1819 //-----------------------------------------------------------------------------
1821 // Non-product code
1822 #ifndef PRODUCT
1823 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1824 address entry = __ pc();
1826 __ push(state);
1827 __ push(c_rarg0);
1828 __ push(c_rarg1);
1829 __ push(c_rarg2);
1830 __ push(c_rarg3);
1831 __ mov(c_rarg2, rax); // Pass itos
1832 #ifdef _WIN64
1833 __ movflt(xmm3, xmm0); // Pass ftos
1834 #endif
1835 __ call_VM(noreg,
1836 CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode),
1837 c_rarg1, c_rarg2, c_rarg3);
1838 __ pop(c_rarg3);
1839 __ pop(c_rarg2);
1840 __ pop(c_rarg1);
1841 __ pop(c_rarg0);
1842 __ pop(state);
1843 __ ret(0); // return from result handler
1845 return entry;
1846 }
1848 void TemplateInterpreterGenerator::count_bytecode() {
1849 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value));
1850 }
1852 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1853 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()]));
1854 }
1856 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1857 __ mov32(rbx, ExternalAddress((address) &BytecodePairHistogram::_index));
1858 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes);
1859 __ orl(rbx,
1860 ((int) t->bytecode()) <<
1861 BytecodePairHistogram::log2_number_of_codes);
1862 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx);
1863 __ lea(rscratch1, ExternalAddress((address) BytecodePairHistogram::_counters));
1864 __ incrementl(Address(rscratch1, rbx, Address::times_4));
1865 }
1868 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1869 // Call a little run-time stub to avoid blow-up for each bytecode.
1870 // The run-time runtime saves the right registers, depending on
1871 // the tosca in-state for the given template.
1873 assert(Interpreter::trace_code(t->tos_in()) != NULL,
1874 "entry must have been generated");
1875 __ mov(r12, rsp); // remember sp
1876 __ andptr(rsp, -16); // align stack as required by ABI
1877 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in())));
1878 __ mov(rsp, r12); // restore sp
1879 __ reinit_heapbase();
1880 }
1883 void TemplateInterpreterGenerator::stop_interpreter_at() {
1884 Label L;
1885 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value),
1886 StopInterpreterAt);
1887 __ jcc(Assembler::notEqual, L);
1888 __ int3();
1889 __ bind(L);
1890 }
1891 #endif // !PRODUCT
1892 #endif // ! CC_INTERP