Sat, 07 Nov 2020 10:30:02 +0800
Added tag mips-jdk8u275-b01 for changeset d3b4d62f391f
1 //
2 // Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 //
5 // This code is free software; you can redistribute it and/or modify it
6 // under the terms of the GNU General Public License version 2 only, as
7 // published by the Free Software Foundation.
8 //
9 // This code is distributed in the hope that it will be useful, but WITHOUT
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 // version 2 for more details (a copy is included in the LICENSE file that
13 // accompanied this code).
14 //
15 // You should have received a copy of the GNU General Public License version
16 // 2 along with this work; if not, write to the Free Software Foundation,
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 //
19 // Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 // or visit www.oracle.com if you need additional information or have any
21 // questions.
22 //
23 //
25 // X86 Architecture Description File
27 //----------REGISTER DEFINITION BLOCK------------------------------------------
28 // This information is used by the matcher and the register allocator to
29 // describe individual registers and classes of registers within the target
30 // archtecture.
32 register %{
33 //----------Architecture Description Register Definitions----------------------
34 // General Registers
35 // "reg_def" name ( register save type, C convention save type,
36 // ideal register type, encoding );
37 // Register Save Types:
38 //
39 // NS = No-Save: The register allocator assumes that these registers
40 // can be used without saving upon entry to the method, &
41 // that they do not need to be saved at call sites.
42 //
43 // SOC = Save-On-Call: The register allocator assumes that these registers
44 // can be used without saving upon entry to the method,
45 // but that they must be saved at call sites.
46 //
47 // SOE = Save-On-Entry: The register allocator assumes that these registers
48 // must be saved before using them upon entry to the
49 // method, but they do not need to be saved at call
50 // sites.
51 //
52 // AS = Always-Save: The register allocator assumes that these registers
53 // must be saved before using them upon entry to the
54 // method, & that they must be saved at call sites.
55 //
56 // Ideal Register Type is used to determine how to save & restore a
57 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get
58 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI.
59 //
60 // The encoding number is the actual bit-pattern placed into the opcodes.
62 // General Registers
63 // Previously set EBX, ESI, and EDI as save-on-entry for java code
64 // Turn off SOE in java-code due to frequent use of uncommon-traps.
65 // Now that allocator is better, turn on ESI and EDI as SOE registers.
67 reg_def EBX(SOC, SOE, Op_RegI, 3, rbx->as_VMReg());
68 reg_def ECX(SOC, SOC, Op_RegI, 1, rcx->as_VMReg());
69 reg_def ESI(SOC, SOE, Op_RegI, 6, rsi->as_VMReg());
70 reg_def EDI(SOC, SOE, Op_RegI, 7, rdi->as_VMReg());
71 // now that adapter frames are gone EBP is always saved and restored by the prolog/epilog code
72 reg_def EBP(NS, SOE, Op_RegI, 5, rbp->as_VMReg());
73 reg_def EDX(SOC, SOC, Op_RegI, 2, rdx->as_VMReg());
74 reg_def EAX(SOC, SOC, Op_RegI, 0, rax->as_VMReg());
75 reg_def ESP( NS, NS, Op_RegI, 4, rsp->as_VMReg());
77 // Float registers. We treat TOS/FPR0 special. It is invisible to the
78 // allocator, and only shows up in the encodings.
79 reg_def FPR0L( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
80 reg_def FPR0H( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
81 // Ok so here's the trick FPR1 is really st(0) except in the midst
82 // of emission of assembly for a machnode. During the emission the fpu stack
83 // is pushed making FPR1 == st(1) temporarily. However at any safepoint
84 // the stack will not have this element so FPR1 == st(0) from the
85 // oopMap viewpoint. This same weirdness with numbering causes
86 // instruction encoding to have to play games with the register
87 // encode to correct for this 0/1 issue. See MachSpillCopyNode::implementation
88 // where it does flt->flt moves to see an example
89 //
90 reg_def FPR1L( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg());
91 reg_def FPR1H( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg()->next());
92 reg_def FPR2L( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg());
93 reg_def FPR2H( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg()->next());
94 reg_def FPR3L( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg());
95 reg_def FPR3H( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg()->next());
96 reg_def FPR4L( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg());
97 reg_def FPR4H( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg()->next());
98 reg_def FPR5L( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg());
99 reg_def FPR5H( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg()->next());
100 reg_def FPR6L( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg());
101 reg_def FPR6H( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg()->next());
102 reg_def FPR7L( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg());
103 reg_def FPR7H( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg()->next());
105 // Specify priority of register selection within phases of register
106 // allocation. Highest priority is first. A useful heuristic is to
107 // give registers a low priority when they are required by machine
108 // instructions, like EAX and EDX. Registers which are used as
109 // pairs must fall on an even boundary (witness the FPR#L's in this list).
110 // For the Intel integer registers, the equivalent Long pairs are
111 // EDX:EAX, EBX:ECX, and EDI:EBP.
112 alloc_class chunk0( ECX, EBX, EBP, EDI, EAX, EDX, ESI, ESP,
113 FPR0L, FPR0H, FPR1L, FPR1H, FPR2L, FPR2H,
114 FPR3L, FPR3H, FPR4L, FPR4H, FPR5L, FPR5H,
115 FPR6L, FPR6H, FPR7L, FPR7H );
118 //----------Architecture Description Register Classes--------------------------
119 // Several register classes are automatically defined based upon information in
120 // this architecture description.
121 // 1) reg_class inline_cache_reg ( /* as def'd in frame section */ )
122 // 2) reg_class compiler_method_oop_reg ( /* as def'd in frame section */ )
123 // 2) reg_class interpreter_method_oop_reg ( /* as def'd in frame section */ )
124 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ )
125 //
126 // Class for no registers (empty set).
127 reg_class no_reg();
129 // Class for all registers
130 reg_class any_reg_with_ebp(EAX, EDX, EBP, EDI, ESI, ECX, EBX, ESP);
131 // Class for all registers (excluding EBP)
132 reg_class any_reg_no_ebp(EAX, EDX, EDI, ESI, ECX, EBX, ESP);
133 // Dynamic register class that selects at runtime between register classes
134 // any_reg and any_no_ebp_reg (depending on the value of the flag PreserveFramePointer).
135 // Equivalent to: return PreserveFramePointer ? any_no_ebp_reg : any_reg;
136 reg_class_dynamic any_reg(any_reg_no_ebp, any_reg_with_ebp, %{ PreserveFramePointer %});
138 // Class for general registers
139 reg_class int_reg_with_ebp(EAX, EDX, EBP, EDI, ESI, ECX, EBX);
140 // Class for general registers (excluding EBP).
141 // This register class can be used for implicit null checks on win95.
142 // It is also safe for use by tailjumps (we don't want to allocate in ebp).
143 // Used also if the PreserveFramePointer flag is true.
144 reg_class int_reg_no_ebp(EAX, EDX, EDI, ESI, ECX, EBX);
145 // Dynamic register class that selects between int_reg and int_reg_no_ebp.
146 reg_class_dynamic int_reg(int_reg_no_ebp, int_reg_with_ebp, %{ PreserveFramePointer %});
148 // Class of "X" registers
149 reg_class int_x_reg(EBX, ECX, EDX, EAX);
151 // Class of registers that can appear in an address with no offset.
152 // EBP and ESP require an extra instruction byte for zero offset.
153 // Used in fast-unlock
154 reg_class p_reg(EDX, EDI, ESI, EBX);
156 // Class for general registers excluding ECX
157 reg_class ncx_reg_with_ebp(EAX, EDX, EBP, EDI, ESI, EBX);
158 // Class for general registers excluding ECX (and EBP)
159 reg_class ncx_reg_no_ebp(EAX, EDX, EDI, ESI, EBX);
160 // Dynamic register class that selects between ncx_reg and ncx_reg_no_ebp.
161 reg_class_dynamic ncx_reg(ncx_reg_no_ebp, ncx_reg_with_ebp, %{ PreserveFramePointer %});
163 // Class for general registers excluding EAX
164 reg_class nax_reg(EDX, EDI, ESI, ECX, EBX);
166 // Class for general registers excluding EAX and EBX.
167 reg_class nabx_reg_with_ebp(EDX, EDI, ESI, ECX, EBP);
168 // Class for general registers excluding EAX and EBX (and EBP)
169 reg_class nabx_reg_no_ebp(EDX, EDI, ESI, ECX);
170 // Dynamic register class that selects between nabx_reg and nabx_reg_no_ebp.
171 reg_class_dynamic nabx_reg(nabx_reg_no_ebp, nabx_reg_with_ebp, %{ PreserveFramePointer %});
173 // Class of EAX (for multiply and divide operations)
174 reg_class eax_reg(EAX);
176 // Class of EBX (for atomic add)
177 reg_class ebx_reg(EBX);
179 // Class of ECX (for shift and JCXZ operations and cmpLTMask)
180 reg_class ecx_reg(ECX);
182 // Class of EDX (for multiply and divide operations)
183 reg_class edx_reg(EDX);
185 // Class of EDI (for synchronization)
186 reg_class edi_reg(EDI);
188 // Class of ESI (for synchronization)
189 reg_class esi_reg(ESI);
191 // Singleton class for stack pointer
192 reg_class sp_reg(ESP);
194 // Singleton class for instruction pointer
195 // reg_class ip_reg(EIP);
197 // Class of integer register pairs
198 reg_class long_reg_with_ebp( EAX,EDX, ECX,EBX, EBP,EDI );
199 // Class of integer register pairs (excluding EBP and EDI);
200 reg_class long_reg_no_ebp( EAX,EDX, ECX,EBX );
201 // Dynamic register class that selects between long_reg and long_reg_no_ebp.
202 reg_class_dynamic long_reg(long_reg_no_ebp, long_reg_with_ebp, %{ PreserveFramePointer %});
204 // Class of integer register pairs that aligns with calling convention
205 reg_class eadx_reg( EAX,EDX );
206 reg_class ebcx_reg( ECX,EBX );
208 // Not AX or DX, used in divides
209 reg_class nadx_reg_with_ebp(EBX, ECX, ESI, EDI, EBP);
210 // Not AX or DX (and neither EBP), used in divides
211 reg_class nadx_reg_no_ebp(EBX, ECX, ESI, EDI);
212 // Dynamic register class that selects between nadx_reg and nadx_reg_no_ebp.
213 reg_class_dynamic nadx_reg(nadx_reg_no_ebp, nadx_reg_with_ebp, %{ PreserveFramePointer %});
215 // Floating point registers. Notice FPR0 is not a choice.
216 // FPR0 is not ever allocated; we use clever encodings to fake
217 // a 2-address instructions out of Intels FP stack.
218 reg_class fp_flt_reg( FPR1L,FPR2L,FPR3L,FPR4L,FPR5L,FPR6L,FPR7L );
220 reg_class fp_dbl_reg( FPR1L,FPR1H, FPR2L,FPR2H, FPR3L,FPR3H,
221 FPR4L,FPR4H, FPR5L,FPR5H, FPR6L,FPR6H,
222 FPR7L,FPR7H );
224 reg_class fp_flt_reg0( FPR1L );
225 reg_class fp_dbl_reg0( FPR1L,FPR1H );
226 reg_class fp_dbl_reg1( FPR2L,FPR2H );
227 reg_class fp_dbl_notreg0( FPR2L,FPR2H, FPR3L,FPR3H, FPR4L,FPR4H,
228 FPR5L,FPR5H, FPR6L,FPR6H, FPR7L,FPR7H );
230 %}
233 //----------SOURCE BLOCK-------------------------------------------------------
234 // This is a block of C++ code which provides values, functions, and
235 // definitions necessary in the rest of the architecture description
236 source_hpp %{
237 // Must be visible to the DFA in dfa_x86_32.cpp
238 extern bool is_operand_hi32_zero(Node* n);
239 %}
241 source %{
242 #define RELOC_IMM32 Assembler::imm_operand
243 #define RELOC_DISP32 Assembler::disp32_operand
245 #define __ _masm.
247 // How to find the high register of a Long pair, given the low register
248 #define HIGH_FROM_LOW(x) ((x)+2)
250 // These masks are used to provide 128-bit aligned bitmasks to the XMM
251 // instructions, to allow sign-masking or sign-bit flipping. They allow
252 // fast versions of NegF/NegD and AbsF/AbsD.
254 // Note: 'double' and 'long long' have 32-bits alignment on x86.
255 static jlong* double_quadword(jlong *adr, jlong lo, jlong hi) {
256 // Use the expression (adr)&(~0xF) to provide 128-bits aligned address
257 // of 128-bits operands for SSE instructions.
258 jlong *operand = (jlong*)(((uintptr_t)adr)&((uintptr_t)(~0xF)));
259 // Store the value to a 128-bits operand.
260 operand[0] = lo;
261 operand[1] = hi;
262 return operand;
263 }
265 // Buffer for 128-bits masks used by SSE instructions.
266 static jlong fp_signmask_pool[(4+1)*2]; // 4*128bits(data) + 128bits(alignment)
268 // Static initialization during VM startup.
269 static jlong *float_signmask_pool = double_quadword(&fp_signmask_pool[1*2], CONST64(0x7FFFFFFF7FFFFFFF), CONST64(0x7FFFFFFF7FFFFFFF));
270 static jlong *double_signmask_pool = double_quadword(&fp_signmask_pool[2*2], CONST64(0x7FFFFFFFFFFFFFFF), CONST64(0x7FFFFFFFFFFFFFFF));
271 static jlong *float_signflip_pool = double_quadword(&fp_signmask_pool[3*2], CONST64(0x8000000080000000), CONST64(0x8000000080000000));
272 static jlong *double_signflip_pool = double_quadword(&fp_signmask_pool[4*2], CONST64(0x8000000000000000), CONST64(0x8000000000000000));
274 // Offset hacking within calls.
275 static int pre_call_resets_size() {
276 int size = 0;
277 Compile* C = Compile::current();
278 if (C->in_24_bit_fp_mode()) {
279 size += 6; // fldcw
280 }
281 if (C->max_vector_size() > 16) {
282 size += 3; // vzeroupper
283 }
284 return size;
285 }
287 // !!!!! Special hack to get all type of calls to specify the byte offset
288 // from the start of the call to the point where the return address
289 // will point.
290 int MachCallStaticJavaNode::ret_addr_offset() {
291 return 5 + pre_call_resets_size(); // 5 bytes from start of call to where return address points
292 }
294 int MachCallDynamicJavaNode::ret_addr_offset() {
295 return 10 + pre_call_resets_size(); // 10 bytes from start of call to where return address points
296 }
298 static int sizeof_FFree_Float_Stack_All = -1;
300 int MachCallRuntimeNode::ret_addr_offset() {
301 assert(sizeof_FFree_Float_Stack_All != -1, "must have been emitted already");
302 return sizeof_FFree_Float_Stack_All + 5 + pre_call_resets_size();
303 }
305 // Indicate if the safepoint node needs the polling page as an input.
306 // Since x86 does have absolute addressing, it doesn't.
307 bool SafePointNode::needs_polling_address_input() {
308 return false;
309 }
311 //
312 // Compute padding required for nodes which need alignment
313 //
315 // The address of the call instruction needs to be 4-byte aligned to
316 // ensure that it does not span a cache line so that it can be patched.
317 int CallStaticJavaDirectNode::compute_padding(int current_offset) const {
318 current_offset += pre_call_resets_size(); // skip fldcw, if any
319 current_offset += 1; // skip call opcode byte
320 return round_to(current_offset, alignment_required()) - current_offset;
321 }
323 // The address of the call instruction needs to be 4-byte aligned to
324 // ensure that it does not span a cache line so that it can be patched.
325 int CallDynamicJavaDirectNode::compute_padding(int current_offset) const {
326 current_offset += pre_call_resets_size(); // skip fldcw, if any
327 current_offset += 5; // skip MOV instruction
328 current_offset += 1; // skip call opcode byte
329 return round_to(current_offset, alignment_required()) - current_offset;
330 }
332 // EMIT_RM()
333 void emit_rm(CodeBuffer &cbuf, int f1, int f2, int f3) {
334 unsigned char c = (unsigned char)((f1 << 6) | (f2 << 3) | f3);
335 cbuf.insts()->emit_int8(c);
336 }
338 // EMIT_CC()
339 void emit_cc(CodeBuffer &cbuf, int f1, int f2) {
340 unsigned char c = (unsigned char)( f1 | f2 );
341 cbuf.insts()->emit_int8(c);
342 }
344 // EMIT_OPCODE()
345 void emit_opcode(CodeBuffer &cbuf, int code) {
346 cbuf.insts()->emit_int8((unsigned char) code);
347 }
349 // EMIT_OPCODE() w/ relocation information
350 void emit_opcode(CodeBuffer &cbuf, int code, relocInfo::relocType reloc, int offset = 0) {
351 cbuf.relocate(cbuf.insts_mark() + offset, reloc);
352 emit_opcode(cbuf, code);
353 }
355 // EMIT_D8()
356 void emit_d8(CodeBuffer &cbuf, int d8) {
357 cbuf.insts()->emit_int8((unsigned char) d8);
358 }
360 // EMIT_D16()
361 void emit_d16(CodeBuffer &cbuf, int d16) {
362 cbuf.insts()->emit_int16(d16);
363 }
365 // EMIT_D32()
366 void emit_d32(CodeBuffer &cbuf, int d32) {
367 cbuf.insts()->emit_int32(d32);
368 }
370 // emit 32 bit value and construct relocation entry from relocInfo::relocType
371 void emit_d32_reloc(CodeBuffer &cbuf, int d32, relocInfo::relocType reloc,
372 int format) {
373 cbuf.relocate(cbuf.insts_mark(), reloc, format);
374 cbuf.insts()->emit_int32(d32);
375 }
377 // emit 32 bit value and construct relocation entry from RelocationHolder
378 void emit_d32_reloc(CodeBuffer &cbuf, int d32, RelocationHolder const& rspec,
379 int format) {
380 #ifdef ASSERT
381 if (rspec.reloc()->type() == relocInfo::oop_type && d32 != 0 && d32 != (int)Universe::non_oop_word()) {
382 assert(cast_to_oop(d32)->is_oop() && (ScavengeRootsInCode || !cast_to_oop(d32)->is_scavengable()), "cannot embed scavengable oops in code");
383 }
384 #endif
385 cbuf.relocate(cbuf.insts_mark(), rspec, format);
386 cbuf.insts()->emit_int32(d32);
387 }
389 // Access stack slot for load or store
390 void store_to_stackslot(CodeBuffer &cbuf, int opcode, int rm_field, int disp) {
391 emit_opcode( cbuf, opcode ); // (e.g., FILD [ESP+src])
392 if( -128 <= disp && disp <= 127 ) {
393 emit_rm( cbuf, 0x01, rm_field, ESP_enc ); // R/M byte
394 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
395 emit_d8 (cbuf, disp); // Displacement // R/M byte
396 } else {
397 emit_rm( cbuf, 0x02, rm_field, ESP_enc ); // R/M byte
398 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
399 emit_d32(cbuf, disp); // Displacement // R/M byte
400 }
401 }
403 // rRegI ereg, memory mem) %{ // emit_reg_mem
404 void encode_RegMem( CodeBuffer &cbuf, int reg_encoding, int base, int index, int scale, int displace, relocInfo::relocType disp_reloc ) {
405 // There is no index & no scale, use form without SIB byte
406 if ((index == 0x4) &&
407 (scale == 0) && (base != ESP_enc)) {
408 // If no displacement, mode is 0x0; unless base is [EBP]
409 if ( (displace == 0) && (base != EBP_enc) ) {
410 emit_rm(cbuf, 0x0, reg_encoding, base);
411 }
412 else { // If 8-bit displacement, mode 0x1
413 if ((displace >= -128) && (displace <= 127)
414 && (disp_reloc == relocInfo::none) ) {
415 emit_rm(cbuf, 0x1, reg_encoding, base);
416 emit_d8(cbuf, displace);
417 }
418 else { // If 32-bit displacement
419 if (base == -1) { // Special flag for absolute address
420 emit_rm(cbuf, 0x0, reg_encoding, 0x5);
421 // (manual lies; no SIB needed here)
422 if ( disp_reloc != relocInfo::none ) {
423 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
424 } else {
425 emit_d32 (cbuf, displace);
426 }
427 }
428 else { // Normal base + offset
429 emit_rm(cbuf, 0x2, reg_encoding, base);
430 if ( disp_reloc != relocInfo::none ) {
431 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
432 } else {
433 emit_d32 (cbuf, displace);
434 }
435 }
436 }
437 }
438 }
439 else { // Else, encode with the SIB byte
440 // If no displacement, mode is 0x0; unless base is [EBP]
441 if (displace == 0 && (base != EBP_enc)) { // If no displacement
442 emit_rm(cbuf, 0x0, reg_encoding, 0x4);
443 emit_rm(cbuf, scale, index, base);
444 }
445 else { // If 8-bit displacement, mode 0x1
446 if ((displace >= -128) && (displace <= 127)
447 && (disp_reloc == relocInfo::none) ) {
448 emit_rm(cbuf, 0x1, reg_encoding, 0x4);
449 emit_rm(cbuf, scale, index, base);
450 emit_d8(cbuf, displace);
451 }
452 else { // If 32-bit displacement
453 if (base == 0x04 ) {
454 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
455 emit_rm(cbuf, scale, index, 0x04);
456 } else {
457 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
458 emit_rm(cbuf, scale, index, base);
459 }
460 if ( disp_reloc != relocInfo::none ) {
461 emit_d32_reloc(cbuf, displace, disp_reloc, 1);
462 } else {
463 emit_d32 (cbuf, displace);
464 }
465 }
466 }
467 }
468 }
471 void encode_Copy( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
472 if( dst_encoding == src_encoding ) {
473 // reg-reg copy, use an empty encoding
474 } else {
475 emit_opcode( cbuf, 0x8B );
476 emit_rm(cbuf, 0x3, dst_encoding, src_encoding );
477 }
478 }
480 void emit_cmpfp_fixup(MacroAssembler& _masm) {
481 Label exit;
482 __ jccb(Assembler::noParity, exit);
483 __ pushf();
484 //
485 // comiss/ucomiss instructions set ZF,PF,CF flags and
486 // zero OF,AF,SF for NaN values.
487 // Fixup flags by zeroing ZF,PF so that compare of NaN
488 // values returns 'less than' result (CF is set).
489 // Leave the rest of flags unchanged.
490 //
491 // 7 6 5 4 3 2 1 0
492 // |S|Z|r|A|r|P|r|C| (r - reserved bit)
493 // 0 0 1 0 1 0 1 1 (0x2B)
494 //
495 __ andl(Address(rsp, 0), 0xffffff2b);
496 __ popf();
497 __ bind(exit);
498 }
500 void emit_cmpfp3(MacroAssembler& _masm, Register dst) {
501 Label done;
502 __ movl(dst, -1);
503 __ jcc(Assembler::parity, done);
504 __ jcc(Assembler::below, done);
505 __ setb(Assembler::notEqual, dst);
506 __ movzbl(dst, dst);
507 __ bind(done);
508 }
511 //=============================================================================
512 const RegMask& MachConstantBaseNode::_out_RegMask = RegMask::Empty;
514 int Compile::ConstantTable::calculate_table_base_offset() const {
515 return 0; // absolute addressing, no offset
516 }
518 bool MachConstantBaseNode::requires_postalloc_expand() const { return false; }
519 void MachConstantBaseNode::postalloc_expand(GrowableArray <Node *> *nodes, PhaseRegAlloc *ra_) {
520 ShouldNotReachHere();
521 }
523 void MachConstantBaseNode::emit(CodeBuffer& cbuf, PhaseRegAlloc* ra_) const {
524 // Empty encoding
525 }
527 uint MachConstantBaseNode::size(PhaseRegAlloc* ra_) const {
528 return 0;
529 }
531 #ifndef PRODUCT
532 void MachConstantBaseNode::format(PhaseRegAlloc* ra_, outputStream* st) const {
533 st->print("# MachConstantBaseNode (empty encoding)");
534 }
535 #endif
538 //=============================================================================
539 #ifndef PRODUCT
540 void MachPrologNode::format(PhaseRegAlloc* ra_, outputStream* st) const {
541 Compile* C = ra_->C;
543 int framesize = C->frame_size_in_bytes();
544 int bangsize = C->bang_size_in_bytes();
545 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
546 // Remove wordSize for return addr which is already pushed.
547 framesize -= wordSize;
549 if (C->need_stack_bang(bangsize)) {
550 framesize -= wordSize;
551 st->print("# stack bang (%d bytes)", bangsize);
552 st->print("\n\t");
553 st->print("PUSH EBP\t# Save EBP");
554 if (PreserveFramePointer) {
555 st->print("\n\t");
556 st->print("MOV EBP, ESP\t# Save the caller's SP into EBP");
557 }
558 if (framesize) {
559 st->print("\n\t");
560 st->print("SUB ESP, #%d\t# Create frame",framesize);
561 }
562 } else {
563 st->print("SUB ESP, #%d\t# Create frame",framesize);
564 st->print("\n\t");
565 framesize -= wordSize;
566 st->print("MOV [ESP + #%d], EBP\t# Save EBP",framesize);
567 if (PreserveFramePointer) {
568 st->print("\n\t");
569 st->print("MOV EBP, ESP\t# Save the caller's SP into EBP");
570 if (framesize > 0) {
571 st->print("\n\t");
572 st->print("ADD EBP, #%d", framesize);
573 }
574 }
575 }
577 if (VerifyStackAtCalls) {
578 st->print("\n\t");
579 framesize -= wordSize;
580 st->print("MOV [ESP + #%d], 0xBADB100D\t# Majik cookie for stack depth check",framesize);
581 }
583 if( C->in_24_bit_fp_mode() ) {
584 st->print("\n\t");
585 st->print("FLDCW \t# load 24 bit fpu control word");
586 }
587 if (UseSSE >= 2 && VerifyFPU) {
588 st->print("\n\t");
589 st->print("# verify FPU stack (must be clean on entry)");
590 }
592 #ifdef ASSERT
593 if (VerifyStackAtCalls) {
594 st->print("\n\t");
595 st->print("# stack alignment check");
596 }
597 #endif
598 st->cr();
599 }
600 #endif
603 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
604 Compile* C = ra_->C;
605 MacroAssembler _masm(&cbuf);
607 int framesize = C->frame_size_in_bytes();
608 int bangsize = C->bang_size_in_bytes();
610 __ verified_entry(framesize, C->need_stack_bang(bangsize)?bangsize:0, C->in_24_bit_fp_mode());
612 C->set_frame_complete(cbuf.insts_size());
614 if (C->has_mach_constant_base_node()) {
615 // NOTE: We set the table base offset here because users might be
616 // emitted before MachConstantBaseNode.
617 Compile::ConstantTable& constant_table = C->constant_table();
618 constant_table.set_table_base_offset(constant_table.calculate_table_base_offset());
619 }
620 }
622 uint MachPrologNode::size(PhaseRegAlloc *ra_) const {
623 return MachNode::size(ra_); // too many variables; just compute it the hard way
624 }
626 int MachPrologNode::reloc() const {
627 return 0; // a large enough number
628 }
630 //=============================================================================
631 #ifndef PRODUCT
632 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
633 Compile *C = ra_->C;
634 int framesize = C->frame_size_in_bytes();
635 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
636 // Remove two words for return addr and rbp,
637 framesize -= 2*wordSize;
639 if (C->max_vector_size() > 16) {
640 st->print("VZEROUPPER");
641 st->cr(); st->print("\t");
642 }
643 if (C->in_24_bit_fp_mode()) {
644 st->print("FLDCW standard control word");
645 st->cr(); st->print("\t");
646 }
647 if (framesize) {
648 st->print("ADD ESP,%d\t# Destroy frame",framesize);
649 st->cr(); st->print("\t");
650 }
651 st->print_cr("POPL EBP"); st->print("\t");
652 if (do_polling() && C->is_method_compilation()) {
653 st->print("TEST PollPage,EAX\t! Poll Safepoint");
654 st->cr(); st->print("\t");
655 }
656 }
657 #endif
659 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
660 Compile *C = ra_->C;
662 if (C->max_vector_size() > 16) {
663 // Clear upper bits of YMM registers when current compiled code uses
664 // wide vectors to avoid AVX <-> SSE transition penalty during call.
665 MacroAssembler masm(&cbuf);
666 masm.vzeroupper();
667 }
668 // If method set FPU control word, restore to standard control word
669 if (C->in_24_bit_fp_mode()) {
670 MacroAssembler masm(&cbuf);
671 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
672 }
674 int framesize = C->frame_size_in_bytes();
675 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
676 // Remove two words for return addr and rbp,
677 framesize -= 2*wordSize;
679 // Note that VerifyStackAtCalls' Majik cookie does not change the frame size popped here
681 if (framesize >= 128) {
682 emit_opcode(cbuf, 0x81); // add SP, #framesize
683 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
684 emit_d32(cbuf, framesize);
685 } else if (framesize) {
686 emit_opcode(cbuf, 0x83); // add SP, #framesize
687 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
688 emit_d8(cbuf, framesize);
689 }
691 emit_opcode(cbuf, 0x58 | EBP_enc);
693 if (do_polling() && C->is_method_compilation()) {
694 cbuf.relocate(cbuf.insts_end(), relocInfo::poll_return_type, 0);
695 emit_opcode(cbuf,0x85);
696 emit_rm(cbuf, 0x0, EAX_enc, 0x5); // EAX
697 emit_d32(cbuf, (intptr_t)os::get_polling_page());
698 }
699 }
701 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const {
702 Compile *C = ra_->C;
703 // If method set FPU control word, restore to standard control word
704 int size = C->in_24_bit_fp_mode() ? 6 : 0;
705 if (C->max_vector_size() > 16) size += 3; // vzeroupper
706 if (do_polling() && C->is_method_compilation()) size += 6;
708 int framesize = C->frame_size_in_bytes();
709 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
710 // Remove two words for return addr and rbp,
711 framesize -= 2*wordSize;
713 size++; // popl rbp,
715 if (framesize >= 128) {
716 size += 6;
717 } else {
718 size += framesize ? 3 : 0;
719 }
720 return size;
721 }
723 int MachEpilogNode::reloc() const {
724 return 0; // a large enough number
725 }
727 const Pipeline * MachEpilogNode::pipeline() const {
728 return MachNode::pipeline_class();
729 }
731 int MachEpilogNode::safepoint_offset() const { return 0; }
733 //=============================================================================
735 enum RC { rc_bad, rc_int, rc_float, rc_xmm, rc_stack };
736 static enum RC rc_class( OptoReg::Name reg ) {
738 if( !OptoReg::is_valid(reg) ) return rc_bad;
739 if (OptoReg::is_stack(reg)) return rc_stack;
741 VMReg r = OptoReg::as_VMReg(reg);
742 if (r->is_Register()) return rc_int;
743 if (r->is_FloatRegister()) {
744 assert(UseSSE < 2, "shouldn't be used in SSE2+ mode");
745 return rc_float;
746 }
747 assert(r->is_XMMRegister(), "must be");
748 return rc_xmm;
749 }
751 static int impl_helper( CodeBuffer *cbuf, bool do_size, bool is_load, int offset, int reg,
752 int opcode, const char *op_str, int size, outputStream* st ) {
753 if( cbuf ) {
754 emit_opcode (*cbuf, opcode );
755 encode_RegMem(*cbuf, Matcher::_regEncode[reg], ESP_enc, 0x4, 0, offset, relocInfo::none);
756 #ifndef PRODUCT
757 } else if( !do_size ) {
758 if( size != 0 ) st->print("\n\t");
759 if( opcode == 0x8B || opcode == 0x89 ) { // MOV
760 if( is_load ) st->print("%s %s,[ESP + #%d]",op_str,Matcher::regName[reg],offset);
761 else st->print("%s [ESP + #%d],%s",op_str,offset,Matcher::regName[reg]);
762 } else { // FLD, FST, PUSH, POP
763 st->print("%s [ESP + #%d]",op_str,offset);
764 }
765 #endif
766 }
767 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
768 return size+3+offset_size;
769 }
771 // Helper for XMM registers. Extra opcode bits, limited syntax.
772 static int impl_x_helper( CodeBuffer *cbuf, bool do_size, bool is_load,
773 int offset, int reg_lo, int reg_hi, int size, outputStream* st ) {
774 if (cbuf) {
775 MacroAssembler _masm(cbuf);
776 if (reg_lo+1 == reg_hi) { // double move?
777 if (is_load) {
778 __ movdbl(as_XMMRegister(Matcher::_regEncode[reg_lo]), Address(rsp, offset));
779 } else {
780 __ movdbl(Address(rsp, offset), as_XMMRegister(Matcher::_regEncode[reg_lo]));
781 }
782 } else {
783 if (is_load) {
784 __ movflt(as_XMMRegister(Matcher::_regEncode[reg_lo]), Address(rsp, offset));
785 } else {
786 __ movflt(Address(rsp, offset), as_XMMRegister(Matcher::_regEncode[reg_lo]));
787 }
788 }
789 #ifndef PRODUCT
790 } else if (!do_size) {
791 if (size != 0) st->print("\n\t");
792 if (reg_lo+1 == reg_hi) { // double move?
793 if (is_load) st->print("%s %s,[ESP + #%d]",
794 UseXmmLoadAndClearUpper ? "MOVSD " : "MOVLPD",
795 Matcher::regName[reg_lo], offset);
796 else st->print("MOVSD [ESP + #%d],%s",
797 offset, Matcher::regName[reg_lo]);
798 } else {
799 if (is_load) st->print("MOVSS %s,[ESP + #%d]",
800 Matcher::regName[reg_lo], offset);
801 else st->print("MOVSS [ESP + #%d],%s",
802 offset, Matcher::regName[reg_lo]);
803 }
804 #endif
805 }
806 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
807 // VEX_2bytes prefix is used if UseAVX > 0, so it takes the same 2 bytes as SIMD prefix.
808 return size+5+offset_size;
809 }
812 static int impl_movx_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
813 int src_hi, int dst_hi, int size, outputStream* st ) {
814 if (cbuf) {
815 MacroAssembler _masm(cbuf);
816 if (src_lo+1 == src_hi && dst_lo+1 == dst_hi) { // double move?
817 __ movdbl(as_XMMRegister(Matcher::_regEncode[dst_lo]),
818 as_XMMRegister(Matcher::_regEncode[src_lo]));
819 } else {
820 __ movflt(as_XMMRegister(Matcher::_regEncode[dst_lo]),
821 as_XMMRegister(Matcher::_regEncode[src_lo]));
822 }
823 #ifndef PRODUCT
824 } else if (!do_size) {
825 if (size != 0) st->print("\n\t");
826 if (UseXmmRegToRegMoveAll) {//Use movaps,movapd to move between xmm registers
827 if (src_lo+1 == src_hi && dst_lo+1 == dst_hi) { // double move?
828 st->print("MOVAPD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
829 } else {
830 st->print("MOVAPS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
831 }
832 } else {
833 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
834 st->print("MOVSD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
835 } else {
836 st->print("MOVSS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
837 }
838 }
839 #endif
840 }
841 // VEX_2bytes prefix is used if UseAVX > 0, and it takes the same 2 bytes as SIMD prefix.
842 // Only MOVAPS SSE prefix uses 1 byte.
843 int sz = 4;
844 if (!(src_lo+1 == src_hi && dst_lo+1 == dst_hi) &&
845 UseXmmRegToRegMoveAll && (UseAVX == 0)) sz = 3;
846 return size + sz;
847 }
849 static int impl_movgpr2x_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
850 int src_hi, int dst_hi, int size, outputStream* st ) {
851 // 32-bit
852 if (cbuf) {
853 MacroAssembler _masm(cbuf);
854 __ movdl(as_XMMRegister(Matcher::_regEncode[dst_lo]),
855 as_Register(Matcher::_regEncode[src_lo]));
856 #ifndef PRODUCT
857 } else if (!do_size) {
858 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
859 #endif
860 }
861 return 4;
862 }
865 static int impl_movx2gpr_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
866 int src_hi, int dst_hi, int size, outputStream* st ) {
867 // 32-bit
868 if (cbuf) {
869 MacroAssembler _masm(cbuf);
870 __ movdl(as_Register(Matcher::_regEncode[dst_lo]),
871 as_XMMRegister(Matcher::_regEncode[src_lo]));
872 #ifndef PRODUCT
873 } else if (!do_size) {
874 st->print("movdl %s, %s\t# spill", Matcher::regName[dst_lo], Matcher::regName[src_lo]);
875 #endif
876 }
877 return 4;
878 }
880 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int size, outputStream* st ) {
881 if( cbuf ) {
882 emit_opcode(*cbuf, 0x8B );
883 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst], Matcher::_regEncode[src] );
884 #ifndef PRODUCT
885 } else if( !do_size ) {
886 if( size != 0 ) st->print("\n\t");
887 st->print("MOV %s,%s",Matcher::regName[dst],Matcher::regName[src]);
888 #endif
889 }
890 return size+2;
891 }
893 static int impl_fp_store_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int src_hi, int dst_lo, int dst_hi,
894 int offset, int size, outputStream* st ) {
895 if( src_lo != FPR1L_num ) { // Move value to top of FP stack, if not already there
896 if( cbuf ) {
897 emit_opcode( *cbuf, 0xD9 ); // FLD (i.e., push it)
898 emit_d8( *cbuf, 0xC0-1+Matcher::_regEncode[src_lo] );
899 #ifndef PRODUCT
900 } else if( !do_size ) {
901 if( size != 0 ) st->print("\n\t");
902 st->print("FLD %s",Matcher::regName[src_lo]);
903 #endif
904 }
905 size += 2;
906 }
908 int st_op = (src_lo != FPR1L_num) ? EBX_num /*store & pop*/ : EDX_num /*store no pop*/;
909 const char *op_str;
910 int op;
911 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double store?
912 op_str = (src_lo != FPR1L_num) ? "FSTP_D" : "FST_D ";
913 op = 0xDD;
914 } else { // 32-bit store
915 op_str = (src_lo != FPR1L_num) ? "FSTP_S" : "FST_S ";
916 op = 0xD9;
917 assert( !OptoReg::is_valid(src_hi) && !OptoReg::is_valid(dst_hi), "no non-adjacent float-stores" );
918 }
920 return impl_helper(cbuf,do_size,false,offset,st_op,op,op_str,size, st);
921 }
923 // Next two methods are shared by 32- and 64-bit VM. They are defined in x86.ad.
924 static int vec_mov_helper(CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
925 int src_hi, int dst_hi, uint ireg, outputStream* st);
927 static int vec_spill_helper(CodeBuffer *cbuf, bool do_size, bool is_load,
928 int stack_offset, int reg, uint ireg, outputStream* st);
930 static int vec_stack_to_stack_helper(CodeBuffer *cbuf, bool do_size, int src_offset,
931 int dst_offset, uint ireg, outputStream* st) {
932 int calc_size = 0;
933 int src_offset_size = (src_offset == 0) ? 0 : ((src_offset < 0x80) ? 1 : 4);
934 int dst_offset_size = (dst_offset == 0) ? 0 : ((dst_offset < 0x80) ? 1 : 4);
935 switch (ireg) {
936 case Op_VecS:
937 calc_size = 3+src_offset_size + 3+dst_offset_size;
938 break;
939 case Op_VecD:
940 calc_size = 3+src_offset_size + 3+dst_offset_size;
941 src_offset += 4;
942 dst_offset += 4;
943 src_offset_size = (src_offset == 0) ? 0 : ((src_offset < 0x80) ? 1 : 4);
944 dst_offset_size = (dst_offset == 0) ? 0 : ((dst_offset < 0x80) ? 1 : 4);
945 calc_size += 3+src_offset_size + 3+dst_offset_size;
946 break;
947 case Op_VecX:
948 calc_size = 6 + 6 + 5+src_offset_size + 5+dst_offset_size;
949 break;
950 case Op_VecY:
951 calc_size = 6 + 6 + 5+src_offset_size + 5+dst_offset_size;
952 break;
953 default:
954 ShouldNotReachHere();
955 }
956 if (cbuf) {
957 MacroAssembler _masm(cbuf);
958 int offset = __ offset();
959 switch (ireg) {
960 case Op_VecS:
961 __ pushl(Address(rsp, src_offset));
962 __ popl (Address(rsp, dst_offset));
963 break;
964 case Op_VecD:
965 __ pushl(Address(rsp, src_offset));
966 __ popl (Address(rsp, dst_offset));
967 __ pushl(Address(rsp, src_offset+4));
968 __ popl (Address(rsp, dst_offset+4));
969 break;
970 case Op_VecX:
971 __ movdqu(Address(rsp, -16), xmm0);
972 __ movdqu(xmm0, Address(rsp, src_offset));
973 __ movdqu(Address(rsp, dst_offset), xmm0);
974 __ movdqu(xmm0, Address(rsp, -16));
975 break;
976 case Op_VecY:
977 __ vmovdqu(Address(rsp, -32), xmm0);
978 __ vmovdqu(xmm0, Address(rsp, src_offset));
979 __ vmovdqu(Address(rsp, dst_offset), xmm0);
980 __ vmovdqu(xmm0, Address(rsp, -32));
981 break;
982 default:
983 ShouldNotReachHere();
984 }
985 int size = __ offset() - offset;
986 assert(size == calc_size, "incorrect size calculattion");
987 return size;
988 #ifndef PRODUCT
989 } else if (!do_size) {
990 switch (ireg) {
991 case Op_VecS:
992 st->print("pushl [rsp + #%d]\t# 32-bit mem-mem spill\n\t"
993 "popl [rsp + #%d]",
994 src_offset, dst_offset);
995 break;
996 case Op_VecD:
997 st->print("pushl [rsp + #%d]\t# 64-bit mem-mem spill\n\t"
998 "popq [rsp + #%d]\n\t"
999 "pushl [rsp + #%d]\n\t"
1000 "popq [rsp + #%d]",
1001 src_offset, dst_offset, src_offset+4, dst_offset+4);
1002 break;
1003 case Op_VecX:
1004 st->print("movdqu [rsp - #16], xmm0\t# 128-bit mem-mem spill\n\t"
1005 "movdqu xmm0, [rsp + #%d]\n\t"
1006 "movdqu [rsp + #%d], xmm0\n\t"
1007 "movdqu xmm0, [rsp - #16]",
1008 src_offset, dst_offset);
1009 break;
1010 case Op_VecY:
1011 st->print("vmovdqu [rsp - #32], xmm0\t# 256-bit mem-mem spill\n\t"
1012 "vmovdqu xmm0, [rsp + #%d]\n\t"
1013 "vmovdqu [rsp + #%d], xmm0\n\t"
1014 "vmovdqu xmm0, [rsp - #32]",
1015 src_offset, dst_offset);
1016 break;
1017 default:
1018 ShouldNotReachHere();
1019 }
1020 #endif
1021 }
1022 return calc_size;
1023 }
1025 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, outputStream* st ) const {
1026 // Get registers to move
1027 OptoReg::Name src_second = ra_->get_reg_second(in(1));
1028 OptoReg::Name src_first = ra_->get_reg_first(in(1));
1029 OptoReg::Name dst_second = ra_->get_reg_second(this );
1030 OptoReg::Name dst_first = ra_->get_reg_first(this );
1032 enum RC src_second_rc = rc_class(src_second);
1033 enum RC src_first_rc = rc_class(src_first);
1034 enum RC dst_second_rc = rc_class(dst_second);
1035 enum RC dst_first_rc = rc_class(dst_first);
1037 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" );
1039 // Generate spill code!
1040 int size = 0;
1042 if( src_first == dst_first && src_second == dst_second )
1043 return size; // Self copy, no move
1045 if (bottom_type()->isa_vect() != NULL) {
1046 uint ireg = ideal_reg();
1047 assert((src_first_rc != rc_int && dst_first_rc != rc_int), "sanity");
1048 assert((src_first_rc != rc_float && dst_first_rc != rc_float), "sanity");
1049 assert((ireg == Op_VecS || ireg == Op_VecD || ireg == Op_VecX || ireg == Op_VecY), "sanity");
1050 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
1051 // mem -> mem
1052 int src_offset = ra_->reg2offset(src_first);
1053 int dst_offset = ra_->reg2offset(dst_first);
1054 return vec_stack_to_stack_helper(cbuf, do_size, src_offset, dst_offset, ireg, st);
1055 } else if (src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1056 return vec_mov_helper(cbuf, do_size, src_first, dst_first, src_second, dst_second, ireg, st);
1057 } else if (src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1058 int stack_offset = ra_->reg2offset(dst_first);
1059 return vec_spill_helper(cbuf, do_size, false, stack_offset, src_first, ireg, st);
1060 } else if (src_first_rc == rc_stack && dst_first_rc == rc_xmm ) {
1061 int stack_offset = ra_->reg2offset(src_first);
1062 return vec_spill_helper(cbuf, do_size, true, stack_offset, dst_first, ireg, st);
1063 } else {
1064 ShouldNotReachHere();
1065 }
1066 }
1068 // --------------------------------------
1069 // Check for mem-mem move. push/pop to move.
1070 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
1071 if( src_second == dst_first ) { // overlapping stack copy ranges
1072 assert( src_second_rc == rc_stack && dst_second_rc == rc_stack, "we only expect a stk-stk copy here" );
1073 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
1074 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
1075 src_second_rc = dst_second_rc = rc_bad; // flag as already moved the second bits
1076 }
1077 // move low bits
1078 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),ESI_num,0xFF,"PUSH ",size, st);
1079 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),EAX_num,0x8F,"POP ",size, st);
1080 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { // mov second bits
1081 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
1082 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
1083 }
1084 return size;
1085 }
1087 // --------------------------------------
1088 // Check for integer reg-reg copy
1089 if( src_first_rc == rc_int && dst_first_rc == rc_int )
1090 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,size, st);
1092 // Check for integer store
1093 if( src_first_rc == rc_int && dst_first_rc == rc_stack )
1094 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first,0x89,"MOV ",size, st);
1096 // Check for integer load
1097 if( dst_first_rc == rc_int && src_first_rc == rc_stack )
1098 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first,0x8B,"MOV ",size, st);
1100 // Check for integer reg-xmm reg copy
1101 if( src_first_rc == rc_int && dst_first_rc == rc_xmm ) {
1102 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1103 "no 64 bit integer-float reg moves" );
1104 return impl_movgpr2x_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1105 }
1106 // --------------------------------------
1107 // Check for float reg-reg copy
1108 if( src_first_rc == rc_float && dst_first_rc == rc_float ) {
1109 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1110 (src_first+1 == src_second && dst_first+1 == dst_second), "no non-adjacent float-moves" );
1111 if( cbuf ) {
1113 // Note the mucking with the register encode to compensate for the 0/1
1114 // indexing issue mentioned in a comment in the reg_def sections
1115 // for FPR registers many lines above here.
1117 if( src_first != FPR1L_num ) {
1118 emit_opcode (*cbuf, 0xD9 ); // FLD ST(i)
1119 emit_d8 (*cbuf, 0xC0+Matcher::_regEncode[src_first]-1 );
1120 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1121 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1122 } else {
1123 emit_opcode (*cbuf, 0xDD ); // FST ST(i)
1124 emit_d8 (*cbuf, 0xD0+Matcher::_regEncode[dst_first]-1 );
1125 }
1126 #ifndef PRODUCT
1127 } else if( !do_size ) {
1128 if( size != 0 ) st->print("\n\t");
1129 if( src_first != FPR1L_num ) st->print("FLD %s\n\tFSTP %s",Matcher::regName[src_first],Matcher::regName[dst_first]);
1130 else st->print( "FST %s", Matcher::regName[dst_first]);
1131 #endif
1132 }
1133 return size + ((src_first != FPR1L_num) ? 2+2 : 2);
1134 }
1136 // Check for float store
1137 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) {
1138 return impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,ra_->reg2offset(dst_first),size, st);
1139 }
1141 // Check for float load
1142 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) {
1143 int offset = ra_->reg2offset(src_first);
1144 const char *op_str;
1145 int op;
1146 if( src_first+1 == src_second && dst_first+1 == dst_second ) { // double load?
1147 op_str = "FLD_D";
1148 op = 0xDD;
1149 } else { // 32-bit load
1150 op_str = "FLD_S";
1151 op = 0xD9;
1152 assert( src_second_rc == rc_bad && dst_second_rc == rc_bad, "no non-adjacent float-loads" );
1153 }
1154 if( cbuf ) {
1155 emit_opcode (*cbuf, op );
1156 encode_RegMem(*cbuf, 0x0, ESP_enc, 0x4, 0, offset, relocInfo::none);
1157 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1158 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1159 #ifndef PRODUCT
1160 } else if( !do_size ) {
1161 if( size != 0 ) st->print("\n\t");
1162 st->print("%s ST,[ESP + #%d]\n\tFSTP %s",op_str, offset,Matcher::regName[dst_first]);
1163 #endif
1164 }
1165 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
1166 return size + 3+offset_size+2;
1167 }
1169 // Check for xmm reg-reg copy
1170 if( src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1171 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1172 (src_first+1 == src_second && dst_first+1 == dst_second),
1173 "no non-adjacent float-moves" );
1174 return impl_movx_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1175 }
1177 // Check for xmm reg-integer reg copy
1178 if( src_first_rc == rc_xmm && dst_first_rc == rc_int ) {
1179 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad),
1180 "no 64 bit float-integer reg moves" );
1181 return impl_movx2gpr_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1182 }
1184 // Check for xmm store
1185 if( src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1186 return impl_x_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first, src_second, size, st);
1187 }
1189 // Check for float xmm load
1190 if( dst_first_rc == rc_xmm && src_first_rc == rc_stack ) {
1191 return impl_x_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first, dst_second, size, st);
1192 }
1194 // Copy from float reg to xmm reg
1195 if( dst_first_rc == rc_xmm && src_first_rc == rc_float ) {
1196 // copy to the top of stack from floating point reg
1197 // and use LEA to preserve flags
1198 if( cbuf ) {
1199 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP-8]
1200 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1201 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1202 emit_d8(*cbuf,0xF8);
1203 #ifndef PRODUCT
1204 } else if( !do_size ) {
1205 if( size != 0 ) st->print("\n\t");
1206 st->print("LEA ESP,[ESP-8]");
1207 #endif
1208 }
1209 size += 4;
1211 size = impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,0,size, st);
1213 // Copy from the temp memory to the xmm reg.
1214 size = impl_x_helper(cbuf,do_size,true ,0,dst_first, dst_second, size, st);
1216 if( cbuf ) {
1217 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP+8]
1218 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1219 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1220 emit_d8(*cbuf,0x08);
1221 #ifndef PRODUCT
1222 } else if( !do_size ) {
1223 if( size != 0 ) st->print("\n\t");
1224 st->print("LEA ESP,[ESP+8]");
1225 #endif
1226 }
1227 size += 4;
1228 return size;
1229 }
1231 assert( size > 0, "missed a case" );
1233 // --------------------------------------------------------------------
1234 // Check for second bits still needing moving.
1235 if( src_second == dst_second )
1236 return size; // Self copy; no move
1237 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" );
1239 // Check for second word int-int move
1240 if( src_second_rc == rc_int && dst_second_rc == rc_int )
1241 return impl_mov_helper(cbuf,do_size,src_second,dst_second,size, st);
1243 // Check for second word integer store
1244 if( src_second_rc == rc_int && dst_second_rc == rc_stack )
1245 return impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),src_second,0x89,"MOV ",size, st);
1247 // Check for second word integer load
1248 if( dst_second_rc == rc_int && src_second_rc == rc_stack )
1249 return impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),dst_second,0x8B,"MOV ",size, st);
1252 Unimplemented();
1253 }
1255 #ifndef PRODUCT
1256 void MachSpillCopyNode::format(PhaseRegAlloc *ra_, outputStream* st) const {
1257 implementation( NULL, ra_, false, st );
1258 }
1259 #endif
1261 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1262 implementation( &cbuf, ra_, false, NULL );
1263 }
1265 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const {
1266 return implementation( NULL, ra_, true, NULL );
1267 }
1270 //=============================================================================
1271 #ifndef PRODUCT
1272 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1273 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1274 int reg = ra_->get_reg_first(this);
1275 st->print("LEA %s,[ESP + #%d]",Matcher::regName[reg],offset);
1276 }
1277 #endif
1279 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1280 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1281 int reg = ra_->get_encode(this);
1282 if( offset >= 128 ) {
1283 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1284 emit_rm(cbuf, 0x2, reg, 0x04);
1285 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1286 emit_d32(cbuf, offset);
1287 }
1288 else {
1289 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1290 emit_rm(cbuf, 0x1, reg, 0x04);
1291 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1292 emit_d8(cbuf, offset);
1293 }
1294 }
1296 uint BoxLockNode::size(PhaseRegAlloc *ra_) const {
1297 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1298 if( offset >= 128 ) {
1299 return 7;
1300 }
1301 else {
1302 return 4;
1303 }
1304 }
1306 //=============================================================================
1307 #ifndef PRODUCT
1308 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1309 st->print_cr( "CMP EAX,[ECX+4]\t# Inline cache check");
1310 st->print_cr("\tJNE SharedRuntime::handle_ic_miss_stub");
1311 st->print_cr("\tNOP");
1312 st->print_cr("\tNOP");
1313 if( !OptoBreakpoint )
1314 st->print_cr("\tNOP");
1315 }
1316 #endif
1318 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1319 MacroAssembler masm(&cbuf);
1320 #ifdef ASSERT
1321 uint insts_size = cbuf.insts_size();
1322 #endif
1323 masm.cmpptr(rax, Address(rcx, oopDesc::klass_offset_in_bytes()));
1324 masm.jump_cc(Assembler::notEqual,
1325 RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1326 /* WARNING these NOPs are critical so that verified entry point is properly
1327 aligned for patching by NativeJump::patch_verified_entry() */
1328 int nops_cnt = 2;
1329 if( !OptoBreakpoint ) // Leave space for int3
1330 nops_cnt += 1;
1331 masm.nop(nops_cnt);
1333 assert(cbuf.insts_size() - insts_size == size(ra_), "checking code size of inline cache node");
1334 }
1336 uint MachUEPNode::size(PhaseRegAlloc *ra_) const {
1337 return OptoBreakpoint ? 11 : 12;
1338 }
1341 //=============================================================================
1343 int Matcher::regnum_to_fpu_offset(int regnum) {
1344 return regnum - 32; // The FP registers are in the second chunk
1345 }
1347 // This is UltraSparc specific, true just means we have fast l2f conversion
1348 const bool Matcher::convL2FSupported(void) {
1349 return true;
1350 }
1352 // Is this branch offset short enough that a short branch can be used?
1353 //
1354 // NOTE: If the platform does not provide any short branch variants, then
1355 // this method should return false for offset 0.
1356 bool Matcher::is_short_branch_offset(int rule, int br_size, int offset) {
1357 // The passed offset is relative to address of the branch.
1358 // On 86 a branch displacement is calculated relative to address
1359 // of a next instruction.
1360 offset -= br_size;
1362 // the short version of jmpConUCF2 contains multiple branches,
1363 // making the reach slightly less
1364 if (rule == jmpConUCF2_rule)
1365 return (-126 <= offset && offset <= 125);
1366 return (-128 <= offset && offset <= 127);
1367 }
1369 const bool Matcher::isSimpleConstant64(jlong value) {
1370 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?.
1371 return false;
1372 }
1374 // The ecx parameter to rep stos for the ClearArray node is in dwords.
1375 const bool Matcher::init_array_count_is_in_bytes = false;
1377 // Threshold size for cleararray.
1378 const int Matcher::init_array_short_size = 8 * BytesPerLong;
1380 // Needs 2 CMOV's for longs.
1381 const int Matcher::long_cmove_cost() { return 1; }
1383 // No CMOVF/CMOVD with SSE/SSE2
1384 const int Matcher::float_cmove_cost() { return (UseSSE>=1) ? ConditionalMoveLimit : 0; }
1386 // Does the CPU require late expand (see block.cpp for description of late expand)?
1387 const bool Matcher::require_postalloc_expand = false;
1389 // Should the Matcher clone shifts on addressing modes, expecting them to
1390 // be subsumed into complex addressing expressions or compute them into
1391 // registers? True for Intel but false for most RISCs
1392 const bool Matcher::clone_shift_expressions = true;
1394 // Do we need to mask the count passed to shift instructions or does
1395 // the cpu only look at the lower 5/6 bits anyway?
1396 const bool Matcher::need_masked_shift_count = false;
1398 bool Matcher::narrow_oop_use_complex_address() {
1399 ShouldNotCallThis();
1400 return true;
1401 }
1403 bool Matcher::narrow_klass_use_complex_address() {
1404 ShouldNotCallThis();
1405 return true;
1406 }
1409 // Is it better to copy float constants, or load them directly from memory?
1410 // Intel can load a float constant from a direct address, requiring no
1411 // extra registers. Most RISCs will have to materialize an address into a
1412 // register first, so they would do better to copy the constant from stack.
1413 const bool Matcher::rematerialize_float_constants = true;
1415 // If CPU can load and store mis-aligned doubles directly then no fixup is
1416 // needed. Else we split the double into 2 integer pieces and move it
1417 // piece-by-piece. Only happens when passing doubles into C code as the
1418 // Java calling convention forces doubles to be aligned.
1419 const bool Matcher::misaligned_doubles_ok = true;
1422 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) {
1423 // Get the memory operand from the node
1424 uint numopnds = node->num_opnds(); // Virtual call for number of operands
1425 uint skipped = node->oper_input_base(); // Sum of leaves skipped so far
1426 assert( idx >= skipped, "idx too low in pd_implicit_null_fixup" );
1427 uint opcnt = 1; // First operand
1428 uint num_edges = node->_opnds[1]->num_edges(); // leaves for first operand
1429 while( idx >= skipped+num_edges ) {
1430 skipped += num_edges;
1431 opcnt++; // Bump operand count
1432 assert( opcnt < numopnds, "Accessing non-existent operand" );
1433 num_edges = node->_opnds[opcnt]->num_edges(); // leaves for next operand
1434 }
1436 MachOper *memory = node->_opnds[opcnt];
1437 MachOper *new_memory = NULL;
1438 switch (memory->opcode()) {
1439 case DIRECT:
1440 case INDOFFSET32X:
1441 // No transformation necessary.
1442 return;
1443 case INDIRECT:
1444 new_memory = new (C) indirect_win95_safeOper( );
1445 break;
1446 case INDOFFSET8:
1447 new_memory = new (C) indOffset8_win95_safeOper(memory->disp(NULL, NULL, 0));
1448 break;
1449 case INDOFFSET32:
1450 new_memory = new (C) indOffset32_win95_safeOper(memory->disp(NULL, NULL, 0));
1451 break;
1452 case INDINDEXOFFSET:
1453 new_memory = new (C) indIndexOffset_win95_safeOper(memory->disp(NULL, NULL, 0));
1454 break;
1455 case INDINDEXSCALE:
1456 new_memory = new (C) indIndexScale_win95_safeOper(memory->scale());
1457 break;
1458 case INDINDEXSCALEOFFSET:
1459 new_memory = new (C) indIndexScaleOffset_win95_safeOper(memory->scale(), memory->disp(NULL, NULL, 0));
1460 break;
1461 case LOAD_LONG_INDIRECT:
1462 case LOAD_LONG_INDOFFSET32:
1463 // Does not use EBP as address register, use { EDX, EBX, EDI, ESI}
1464 return;
1465 default:
1466 assert(false, "unexpected memory operand in pd_implicit_null_fixup()");
1467 return;
1468 }
1469 node->_opnds[opcnt] = new_memory;
1470 }
1472 // Advertise here if the CPU requires explicit rounding operations
1473 // to implement the UseStrictFP mode.
1474 const bool Matcher::strict_fp_requires_explicit_rounding = true;
1476 // Are floats conerted to double when stored to stack during deoptimization?
1477 // On x32 it is stored with convertion only when FPU is used for floats.
1478 bool Matcher::float_in_double() { return (UseSSE == 0); }
1480 // Do ints take an entire long register or just half?
1481 const bool Matcher::int_in_long = false;
1483 // Return whether or not this register is ever used as an argument. This
1484 // function is used on startup to build the trampoline stubs in generateOptoStub.
1485 // Registers not mentioned will be killed by the VM call in the trampoline, and
1486 // arguments in those registers not be available to the callee.
1487 bool Matcher::can_be_java_arg( int reg ) {
1488 if( reg == ECX_num || reg == EDX_num ) return true;
1489 if( (reg == XMM0_num || reg == XMM1_num ) && UseSSE>=1 ) return true;
1490 if( (reg == XMM0b_num || reg == XMM1b_num) && UseSSE>=2 ) return true;
1491 return false;
1492 }
1494 bool Matcher::is_spillable_arg( int reg ) {
1495 return can_be_java_arg(reg);
1496 }
1498 bool Matcher::use_asm_for_ldiv_by_con( jlong divisor ) {
1499 // Use hardware integer DIV instruction when
1500 // it is faster than a code which use multiply.
1501 // Only when constant divisor fits into 32 bit
1502 // (min_jint is excluded to get only correct
1503 // positive 32 bit values from negative).
1504 return VM_Version::has_fast_idiv() &&
1505 (divisor == (int)divisor && divisor != min_jint);
1506 }
1508 // Register for DIVI projection of divmodI
1509 RegMask Matcher::divI_proj_mask() {
1510 return EAX_REG_mask();
1511 }
1513 // Register for MODI projection of divmodI
1514 RegMask Matcher::modI_proj_mask() {
1515 return EDX_REG_mask();
1516 }
1518 // Register for DIVL projection of divmodL
1519 RegMask Matcher::divL_proj_mask() {
1520 ShouldNotReachHere();
1521 return RegMask();
1522 }
1524 // Register for MODL projection of divmodL
1525 RegMask Matcher::modL_proj_mask() {
1526 ShouldNotReachHere();
1527 return RegMask();
1528 }
1530 const RegMask Matcher::method_handle_invoke_SP_save_mask() {
1531 return NO_REG_mask();
1532 }
1534 // Returns true if the high 32 bits of the value is known to be zero.
1535 bool is_operand_hi32_zero(Node* n) {
1536 int opc = n->Opcode();
1537 if (opc == Op_AndL) {
1538 Node* o2 = n->in(2);
1539 if (o2->is_Con() && (o2->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1540 return true;
1541 }
1542 }
1543 if (opc == Op_ConL && (n->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1544 return true;
1545 }
1546 return false;
1547 }
1549 %}
1551 //----------ENCODING BLOCK-----------------------------------------------------
1552 // This block specifies the encoding classes used by the compiler to output
1553 // byte streams. Encoding classes generate functions which are called by
1554 // Machine Instruction Nodes in order to generate the bit encoding of the
1555 // instruction. Operands specify their base encoding interface with the
1556 // interface keyword. There are currently supported four interfaces,
1557 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an
1558 // operand to generate a function which returns its register number when
1559 // queried. CONST_INTER causes an operand to generate a function which
1560 // returns the value of the constant when queried. MEMORY_INTER causes an
1561 // operand to generate four functions which return the Base Register, the
1562 // Index Register, the Scale Value, and the Offset Value of the operand when
1563 // queried. COND_INTER causes an operand to generate six functions which
1564 // return the encoding code (ie - encoding bits for the instruction)
1565 // associated with each basic boolean condition for a conditional instruction.
1566 // Instructions specify two basic values for encoding. They use the
1567 // ins_encode keyword to specify their encoding class (which must be one of
1568 // the class names specified in the encoding block), and they use the
1569 // opcode keyword to specify, in order, their primary, secondary, and
1570 // tertiary opcode. Only the opcode sections which a particular instruction
1571 // needs for encoding need to be specified.
1572 encode %{
1573 // Build emit functions for each basic byte or larger field in the intel
1574 // encoding scheme (opcode, rm, sib, immediate), and call them from C++
1575 // code in the enc_class source block. Emit functions will live in the
1576 // main source block for now. In future, we can generalize this by
1577 // adding a syntax that specifies the sizes of fields in an order,
1578 // so that the adlc can build the emit functions automagically
1580 // Emit primary opcode
1581 enc_class OpcP %{
1582 emit_opcode(cbuf, $primary);
1583 %}
1585 // Emit secondary opcode
1586 enc_class OpcS %{
1587 emit_opcode(cbuf, $secondary);
1588 %}
1590 // Emit opcode directly
1591 enc_class Opcode(immI d8) %{
1592 emit_opcode(cbuf, $d8$$constant);
1593 %}
1595 enc_class SizePrefix %{
1596 emit_opcode(cbuf,0x66);
1597 %}
1599 enc_class RegReg (rRegI dst, rRegI src) %{ // RegReg(Many)
1600 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1601 %}
1603 enc_class OpcRegReg (immI opcode, rRegI dst, rRegI src) %{ // OpcRegReg(Many)
1604 emit_opcode(cbuf,$opcode$$constant);
1605 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1606 %}
1608 enc_class mov_r32_imm0( rRegI dst ) %{
1609 emit_opcode( cbuf, 0xB8 + $dst$$reg ); // 0xB8+ rd -- MOV r32 ,imm32
1610 emit_d32 ( cbuf, 0x0 ); // imm32==0x0
1611 %}
1613 enc_class cdq_enc %{
1614 // Full implementation of Java idiv and irem; checks for
1615 // special case as described in JVM spec., p.243 & p.271.
1616 //
1617 // normal case special case
1618 //
1619 // input : rax,: dividend min_int
1620 // reg: divisor -1
1621 //
1622 // output: rax,: quotient (= rax, idiv reg) min_int
1623 // rdx: remainder (= rax, irem reg) 0
1624 //
1625 // Code sequnce:
1626 //
1627 // 81 F8 00 00 00 80 cmp rax,80000000h
1628 // 0F 85 0B 00 00 00 jne normal_case
1629 // 33 D2 xor rdx,edx
1630 // 83 F9 FF cmp rcx,0FFh
1631 // 0F 84 03 00 00 00 je done
1632 // normal_case:
1633 // 99 cdq
1634 // F7 F9 idiv rax,ecx
1635 // done:
1636 //
1637 emit_opcode(cbuf,0x81); emit_d8(cbuf,0xF8);
1638 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00);
1639 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x80); // cmp rax,80000000h
1640 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x85);
1641 emit_opcode(cbuf,0x0B); emit_d8(cbuf,0x00);
1642 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // jne normal_case
1643 emit_opcode(cbuf,0x33); emit_d8(cbuf,0xD2); // xor rdx,edx
1644 emit_opcode(cbuf,0x83); emit_d8(cbuf,0xF9); emit_d8(cbuf,0xFF); // cmp rcx,0FFh
1645 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x84);
1646 emit_opcode(cbuf,0x03); emit_d8(cbuf,0x00);
1647 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // je done
1648 // normal_case:
1649 emit_opcode(cbuf,0x99); // cdq
1650 // idiv (note: must be emitted by the user of this rule)
1651 // normal:
1652 %}
1654 // Dense encoding for older common ops
1655 enc_class Opc_plus(immI opcode, rRegI reg) %{
1656 emit_opcode(cbuf, $opcode$$constant + $reg$$reg);
1657 %}
1660 // Opcde enc_class for 8/32 bit immediate instructions with sign-extension
1661 enc_class OpcSE (immI imm) %{ // Emit primary opcode and set sign-extend bit
1662 // Check for 8-bit immediate, and set sign extend bit in opcode
1663 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1664 emit_opcode(cbuf, $primary | 0x02);
1665 }
1666 else { // If 32-bit immediate
1667 emit_opcode(cbuf, $primary);
1668 }
1669 %}
1671 enc_class OpcSErm (rRegI dst, immI imm) %{ // OpcSEr/m
1672 // Emit primary opcode and set sign-extend bit
1673 // Check for 8-bit immediate, and set sign extend bit in opcode
1674 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1675 emit_opcode(cbuf, $primary | 0x02); }
1676 else { // If 32-bit immediate
1677 emit_opcode(cbuf, $primary);
1678 }
1679 // Emit r/m byte with secondary opcode, after primary opcode.
1680 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1681 %}
1683 enc_class Con8or32 (immI imm) %{ // Con8or32(storeImmI), 8 or 32 bits
1684 // Check for 8-bit immediate, and set sign extend bit in opcode
1685 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1686 $$$emit8$imm$$constant;
1687 }
1688 else { // If 32-bit immediate
1689 // Output immediate
1690 $$$emit32$imm$$constant;
1691 }
1692 %}
1694 enc_class Long_OpcSErm_Lo(eRegL dst, immL imm) %{
1695 // Emit primary opcode and set sign-extend bit
1696 // Check for 8-bit immediate, and set sign extend bit in opcode
1697 int con = (int)$imm$$constant; // Throw away top bits
1698 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1699 // Emit r/m byte with secondary opcode, after primary opcode.
1700 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1701 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1702 else emit_d32(cbuf,con);
1703 %}
1705 enc_class Long_OpcSErm_Hi(eRegL dst, immL imm) %{
1706 // Emit primary opcode and set sign-extend bit
1707 // Check for 8-bit immediate, and set sign extend bit in opcode
1708 int con = (int)($imm$$constant >> 32); // Throw away bottom bits
1709 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1710 // Emit r/m byte with tertiary opcode, after primary opcode.
1711 emit_rm(cbuf, 0x3, $tertiary, HIGH_FROM_LOW($dst$$reg));
1712 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1713 else emit_d32(cbuf,con);
1714 %}
1716 enc_class OpcSReg (rRegI dst) %{ // BSWAP
1717 emit_cc(cbuf, $secondary, $dst$$reg );
1718 %}
1720 enc_class bswap_long_bytes(eRegL dst) %{ // BSWAP
1721 int destlo = $dst$$reg;
1722 int desthi = HIGH_FROM_LOW(destlo);
1723 // bswap lo
1724 emit_opcode(cbuf, 0x0F);
1725 emit_cc(cbuf, 0xC8, destlo);
1726 // bswap hi
1727 emit_opcode(cbuf, 0x0F);
1728 emit_cc(cbuf, 0xC8, desthi);
1729 // xchg lo and hi
1730 emit_opcode(cbuf, 0x87);
1731 emit_rm(cbuf, 0x3, destlo, desthi);
1732 %}
1734 enc_class RegOpc (rRegI div) %{ // IDIV, IMOD, JMP indirect, ...
1735 emit_rm(cbuf, 0x3, $secondary, $div$$reg );
1736 %}
1738 enc_class enc_cmov(cmpOp cop ) %{ // CMOV
1739 $$$emit8$primary;
1740 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1741 %}
1743 enc_class enc_cmov_dpr(cmpOp cop, regDPR src ) %{ // CMOV
1744 int op = 0xDA00 + $cop$$cmpcode + ($src$$reg-1);
1745 emit_d8(cbuf, op >> 8 );
1746 emit_d8(cbuf, op & 255);
1747 %}
1749 // emulate a CMOV with a conditional branch around a MOV
1750 enc_class enc_cmov_branch( cmpOp cop, immI brOffs ) %{ // CMOV
1751 // Invert sense of branch from sense of CMOV
1752 emit_cc( cbuf, 0x70, ($cop$$cmpcode^1) );
1753 emit_d8( cbuf, $brOffs$$constant );
1754 %}
1756 enc_class enc_PartialSubtypeCheck( ) %{
1757 Register Redi = as_Register(EDI_enc); // result register
1758 Register Reax = as_Register(EAX_enc); // super class
1759 Register Recx = as_Register(ECX_enc); // killed
1760 Register Resi = as_Register(ESI_enc); // sub class
1761 Label miss;
1763 MacroAssembler _masm(&cbuf);
1764 __ check_klass_subtype_slow_path(Resi, Reax, Recx, Redi,
1765 NULL, &miss,
1766 /*set_cond_codes:*/ true);
1767 if ($primary) {
1768 __ xorptr(Redi, Redi);
1769 }
1770 __ bind(miss);
1771 %}
1773 enc_class FFree_Float_Stack_All %{ // Free_Float_Stack_All
1774 MacroAssembler masm(&cbuf);
1775 int start = masm.offset();
1776 if (UseSSE >= 2) {
1777 if (VerifyFPU) {
1778 masm.verify_FPU(0, "must be empty in SSE2+ mode");
1779 }
1780 } else {
1781 // External c_calling_convention expects the FPU stack to be 'clean'.
1782 // Compiled code leaves it dirty. Do cleanup now.
1783 masm.empty_FPU_stack();
1784 }
1785 if (sizeof_FFree_Float_Stack_All == -1) {
1786 sizeof_FFree_Float_Stack_All = masm.offset() - start;
1787 } else {
1788 assert(masm.offset() - start == sizeof_FFree_Float_Stack_All, "wrong size");
1789 }
1790 %}
1792 enc_class Verify_FPU_For_Leaf %{
1793 if( VerifyFPU ) {
1794 MacroAssembler masm(&cbuf);
1795 masm.verify_FPU( -3, "Returning from Runtime Leaf call");
1796 }
1797 %}
1799 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime, Java_To_Runtime_Leaf
1800 // This is the instruction starting address for relocation info.
1801 cbuf.set_insts_mark();
1802 $$$emit8$primary;
1803 // CALL directly to the runtime
1804 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1805 runtime_call_Relocation::spec(), RELOC_IMM32 );
1807 if (UseSSE >= 2) {
1808 MacroAssembler _masm(&cbuf);
1809 BasicType rt = tf()->return_type();
1811 if ((rt == T_FLOAT || rt == T_DOUBLE) && !return_value_is_used()) {
1812 // A C runtime call where the return value is unused. In SSE2+
1813 // mode the result needs to be removed from the FPU stack. It's
1814 // likely that this function call could be removed by the
1815 // optimizer if the C function is a pure function.
1816 __ ffree(0);
1817 } else if (rt == T_FLOAT) {
1818 __ lea(rsp, Address(rsp, -4));
1819 __ fstp_s(Address(rsp, 0));
1820 __ movflt(xmm0, Address(rsp, 0));
1821 __ lea(rsp, Address(rsp, 4));
1822 } else if (rt == T_DOUBLE) {
1823 __ lea(rsp, Address(rsp, -8));
1824 __ fstp_d(Address(rsp, 0));
1825 __ movdbl(xmm0, Address(rsp, 0));
1826 __ lea(rsp, Address(rsp, 8));
1827 }
1828 }
1829 %}
1832 enc_class pre_call_resets %{
1833 // If method sets FPU control word restore it here
1834 debug_only(int off0 = cbuf.insts_size());
1835 if (ra_->C->in_24_bit_fp_mode()) {
1836 MacroAssembler _masm(&cbuf);
1837 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1838 }
1839 if (ra_->C->max_vector_size() > 16) {
1840 // Clear upper bits of YMM registers when current compiled code uses
1841 // wide vectors to avoid AVX <-> SSE transition penalty during call.
1842 MacroAssembler _masm(&cbuf);
1843 __ vzeroupper();
1844 }
1845 debug_only(int off1 = cbuf.insts_size());
1846 assert(off1 - off0 == pre_call_resets_size(), "correct size prediction");
1847 %}
1849 enc_class post_call_FPU %{
1850 // If method sets FPU control word do it here also
1851 if (Compile::current()->in_24_bit_fp_mode()) {
1852 MacroAssembler masm(&cbuf);
1853 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
1854 }
1855 %}
1857 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL
1858 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1859 // who we intended to call.
1860 cbuf.set_insts_mark();
1861 $$$emit8$primary;
1862 if (!_method) {
1863 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1864 runtime_call_Relocation::spec(), RELOC_IMM32 );
1865 } else if (_optimized_virtual) {
1866 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1867 opt_virtual_call_Relocation::spec(), RELOC_IMM32 );
1868 } else {
1869 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.insts_end()) - 4),
1870 static_call_Relocation::spec(), RELOC_IMM32 );
1871 }
1872 if (_method) { // Emit stub for static call.
1873 address stub = CompiledStaticCall::emit_to_interp_stub(cbuf);
1874 if (stub == NULL) {
1875 ciEnv::current()->record_failure("CodeCache is full");
1876 return;
1877 }
1878 }
1879 %}
1881 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL
1882 MacroAssembler _masm(&cbuf);
1883 __ ic_call((address)$meth$$method);
1884 %}
1886 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL
1887 int disp = in_bytes(Method::from_compiled_offset());
1888 assert( -128 <= disp && disp <= 127, "compiled_code_offset isn't small");
1890 // CALL *[EAX+in_bytes(Method::from_compiled_code_entry_point_offset())]
1891 cbuf.set_insts_mark();
1892 $$$emit8$primary;
1893 emit_rm(cbuf, 0x01, $secondary, EAX_enc ); // R/M byte
1894 emit_d8(cbuf, disp); // Displacement
1896 %}
1898 // Following encoding is no longer used, but may be restored if calling
1899 // convention changes significantly.
1900 // Became: Xor_Reg(EBP), Java_To_Runtime( labl )
1901 //
1902 // enc_class Java_Interpreter_Call (label labl) %{ // JAVA INTERPRETER CALL
1903 // // int ic_reg = Matcher::inline_cache_reg();
1904 // // int ic_encode = Matcher::_regEncode[ic_reg];
1905 // // int imo_reg = Matcher::interpreter_method_oop_reg();
1906 // // int imo_encode = Matcher::_regEncode[imo_reg];
1907 //
1908 // // // Interpreter expects method_oop in EBX, currently a callee-saved register,
1909 // // // so we load it immediately before the call
1910 // // emit_opcode(cbuf, 0x8B); // MOV imo_reg,ic_reg # method_oop
1911 // // emit_rm(cbuf, 0x03, imo_encode, ic_encode ); // R/M byte
1912 //
1913 // // xor rbp,ebp
1914 // emit_opcode(cbuf, 0x33);
1915 // emit_rm(cbuf, 0x3, EBP_enc, EBP_enc);
1916 //
1917 // // CALL to interpreter.
1918 // cbuf.set_insts_mark();
1919 // $$$emit8$primary;
1920 // emit_d32_reloc(cbuf, ($labl$$label - (int)(cbuf.insts_end()) - 4),
1921 // runtime_call_Relocation::spec(), RELOC_IMM32 );
1922 // %}
1924 enc_class RegOpcImm (rRegI dst, immI8 shift) %{ // SHL, SAR, SHR
1925 $$$emit8$primary;
1926 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1927 $$$emit8$shift$$constant;
1928 %}
1930 enc_class LdImmI (rRegI dst, immI src) %{ // Load Immediate
1931 // Load immediate does not have a zero or sign extended version
1932 // for 8-bit immediates
1933 emit_opcode(cbuf, 0xB8 + $dst$$reg);
1934 $$$emit32$src$$constant;
1935 %}
1937 enc_class LdImmP (rRegI dst, immI src) %{ // Load Immediate
1938 // Load immediate does not have a zero or sign extended version
1939 // for 8-bit immediates
1940 emit_opcode(cbuf, $primary + $dst$$reg);
1941 $$$emit32$src$$constant;
1942 %}
1944 enc_class LdImmL_Lo( eRegL dst, immL src) %{ // Load Immediate
1945 // Load immediate does not have a zero or sign extended version
1946 // for 8-bit immediates
1947 int dst_enc = $dst$$reg;
1948 int src_con = $src$$constant & 0x0FFFFFFFFL;
1949 if (src_con == 0) {
1950 // xor dst, dst
1951 emit_opcode(cbuf, 0x33);
1952 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1953 } else {
1954 emit_opcode(cbuf, $primary + dst_enc);
1955 emit_d32(cbuf, src_con);
1956 }
1957 %}
1959 enc_class LdImmL_Hi( eRegL dst, immL src) %{ // Load Immediate
1960 // Load immediate does not have a zero or sign extended version
1961 // for 8-bit immediates
1962 int dst_enc = $dst$$reg + 2;
1963 int src_con = ((julong)($src$$constant)) >> 32;
1964 if (src_con == 0) {
1965 // xor dst, dst
1966 emit_opcode(cbuf, 0x33);
1967 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1968 } else {
1969 emit_opcode(cbuf, $primary + dst_enc);
1970 emit_d32(cbuf, src_con);
1971 }
1972 %}
1975 // Encode a reg-reg copy. If it is useless, then empty encoding.
1976 enc_class enc_Copy( rRegI dst, rRegI src ) %{
1977 encode_Copy( cbuf, $dst$$reg, $src$$reg );
1978 %}
1980 enc_class enc_CopyL_Lo( rRegI dst, eRegL src ) %{
1981 encode_Copy( cbuf, $dst$$reg, $src$$reg );
1982 %}
1984 enc_class RegReg (rRegI dst, rRegI src) %{ // RegReg(Many)
1985 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1986 %}
1988 enc_class RegReg_Lo(eRegL dst, eRegL src) %{ // RegReg(Many)
1989 $$$emit8$primary;
1990 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1991 %}
1993 enc_class RegReg_Hi(eRegL dst, eRegL src) %{ // RegReg(Many)
1994 $$$emit8$secondary;
1995 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
1996 %}
1998 enc_class RegReg_Lo2(eRegL dst, eRegL src) %{ // RegReg(Many)
1999 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2000 %}
2002 enc_class RegReg_Hi2(eRegL dst, eRegL src) %{ // RegReg(Many)
2003 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2004 %}
2006 enc_class RegReg_HiLo( eRegL src, rRegI dst ) %{
2007 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($src$$reg));
2008 %}
2010 enc_class Con32 (immI src) %{ // Con32(storeImmI)
2011 // Output immediate
2012 $$$emit32$src$$constant;
2013 %}
2015 enc_class Con32FPR_as_bits(immFPR src) %{ // storeF_imm
2016 // Output Float immediate bits
2017 jfloat jf = $src$$constant;
2018 int jf_as_bits = jint_cast( jf );
2019 emit_d32(cbuf, jf_as_bits);
2020 %}
2022 enc_class Con32F_as_bits(immF src) %{ // storeX_imm
2023 // Output Float immediate bits
2024 jfloat jf = $src$$constant;
2025 int jf_as_bits = jint_cast( jf );
2026 emit_d32(cbuf, jf_as_bits);
2027 %}
2029 enc_class Con16 (immI src) %{ // Con16(storeImmI)
2030 // Output immediate
2031 $$$emit16$src$$constant;
2032 %}
2034 enc_class Con_d32(immI src) %{
2035 emit_d32(cbuf,$src$$constant);
2036 %}
2038 enc_class conmemref (eRegP t1) %{ // Con32(storeImmI)
2039 // Output immediate memory reference
2040 emit_rm(cbuf, 0x00, $t1$$reg, 0x05 );
2041 emit_d32(cbuf, 0x00);
2042 %}
2044 enc_class lock_prefix( ) %{
2045 if( os::is_MP() )
2046 emit_opcode(cbuf,0xF0); // [Lock]
2047 %}
2049 // Cmp-xchg long value.
2050 // Note: we need to swap rbx, and rcx before and after the
2051 // cmpxchg8 instruction because the instruction uses
2052 // rcx as the high order word of the new value to store but
2053 // our register encoding uses rbx,.
2054 enc_class enc_cmpxchg8(eSIRegP mem_ptr) %{
2056 // XCHG rbx,ecx
2057 emit_opcode(cbuf,0x87);
2058 emit_opcode(cbuf,0xD9);
2059 // [Lock]
2060 if( os::is_MP() )
2061 emit_opcode(cbuf,0xF0);
2062 // CMPXCHG8 [Eptr]
2063 emit_opcode(cbuf,0x0F);
2064 emit_opcode(cbuf,0xC7);
2065 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2066 // XCHG rbx,ecx
2067 emit_opcode(cbuf,0x87);
2068 emit_opcode(cbuf,0xD9);
2069 %}
2071 enc_class enc_cmpxchg(eSIRegP mem_ptr) %{
2072 // [Lock]
2073 if( os::is_MP() )
2074 emit_opcode(cbuf,0xF0);
2076 // CMPXCHG [Eptr]
2077 emit_opcode(cbuf,0x0F);
2078 emit_opcode(cbuf,0xB1);
2079 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2080 %}
2082 enc_class enc_flags_ne_to_boolean( iRegI res ) %{
2083 int res_encoding = $res$$reg;
2085 // MOV res,0
2086 emit_opcode( cbuf, 0xB8 + res_encoding);
2087 emit_d32( cbuf, 0 );
2088 // JNE,s fail
2089 emit_opcode(cbuf,0x75);
2090 emit_d8(cbuf, 5 );
2091 // MOV res,1
2092 emit_opcode( cbuf, 0xB8 + res_encoding);
2093 emit_d32( cbuf, 1 );
2094 // fail:
2095 %}
2097 enc_class set_instruction_start( ) %{
2098 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2099 %}
2101 enc_class RegMem (rRegI ereg, memory mem) %{ // emit_reg_mem
2102 int reg_encoding = $ereg$$reg;
2103 int base = $mem$$base;
2104 int index = $mem$$index;
2105 int scale = $mem$$scale;
2106 int displace = $mem$$disp;
2107 relocInfo::relocType disp_reloc = $mem->disp_reloc();
2108 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2109 %}
2111 enc_class RegMem_Hi(eRegL ereg, memory mem) %{ // emit_reg_mem
2112 int reg_encoding = HIGH_FROM_LOW($ereg$$reg); // Hi register of pair, computed from lo
2113 int base = $mem$$base;
2114 int index = $mem$$index;
2115 int scale = $mem$$scale;
2116 int displace = $mem$$disp + 4; // Offset is 4 further in memory
2117 assert( $mem->disp_reloc() == relocInfo::none, "Cannot add 4 to oop" );
2118 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, relocInfo::none);
2119 %}
2121 enc_class move_long_small_shift( eRegL dst, immI_1_31 cnt ) %{
2122 int r1, r2;
2123 if( $tertiary == 0xA4 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2124 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2125 emit_opcode(cbuf,0x0F);
2126 emit_opcode(cbuf,$tertiary);
2127 emit_rm(cbuf, 0x3, r1, r2);
2128 emit_d8(cbuf,$cnt$$constant);
2129 emit_d8(cbuf,$primary);
2130 emit_rm(cbuf, 0x3, $secondary, r1);
2131 emit_d8(cbuf,$cnt$$constant);
2132 %}
2134 enc_class move_long_big_shift_sign( eRegL dst, immI_32_63 cnt ) %{
2135 emit_opcode( cbuf, 0x8B ); // Move
2136 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2137 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2138 emit_d8(cbuf,$primary);
2139 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
2140 emit_d8(cbuf,$cnt$$constant-32);
2141 }
2142 emit_d8(cbuf,$primary);
2143 emit_rm(cbuf, 0x3, $secondary, HIGH_FROM_LOW($dst$$reg));
2144 emit_d8(cbuf,31);
2145 %}
2147 enc_class move_long_big_shift_clr( eRegL dst, immI_32_63 cnt ) %{
2148 int r1, r2;
2149 if( $secondary == 0x5 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2150 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2152 emit_opcode( cbuf, 0x8B ); // Move r1,r2
2153 emit_rm(cbuf, 0x3, r1, r2);
2154 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2155 emit_opcode(cbuf,$primary);
2156 emit_rm(cbuf, 0x3, $secondary, r1);
2157 emit_d8(cbuf,$cnt$$constant-32);
2158 }
2159 emit_opcode(cbuf,0x33); // XOR r2,r2
2160 emit_rm(cbuf, 0x3, r2, r2);
2161 %}
2163 // Clone of RegMem but accepts an extra parameter to access each
2164 // half of a double in memory; it never needs relocation info.
2165 enc_class Mov_MemD_half_to_Reg (immI opcode, memory mem, immI disp_for_half, rRegI rm_reg) %{
2166 emit_opcode(cbuf,$opcode$$constant);
2167 int reg_encoding = $rm_reg$$reg;
2168 int base = $mem$$base;
2169 int index = $mem$$index;
2170 int scale = $mem$$scale;
2171 int displace = $mem$$disp + $disp_for_half$$constant;
2172 relocInfo::relocType disp_reloc = relocInfo::none;
2173 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2174 %}
2176 // !!!!! Special Custom Code used by MemMove, and stack access instructions !!!!!
2177 //
2178 // Clone of RegMem except the RM-byte's reg/opcode field is an ADLC-time constant
2179 // and it never needs relocation information.
2180 // Frequently used to move data between FPU's Stack Top and memory.
2181 enc_class RMopc_Mem_no_oop (immI rm_opcode, memory mem) %{
2182 int rm_byte_opcode = $rm_opcode$$constant;
2183 int base = $mem$$base;
2184 int index = $mem$$index;
2185 int scale = $mem$$scale;
2186 int displace = $mem$$disp;
2187 assert( $mem->disp_reloc() == relocInfo::none, "No oops here because no reloc info allowed" );
2188 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, relocInfo::none);
2189 %}
2191 enc_class RMopc_Mem (immI rm_opcode, memory mem) %{
2192 int rm_byte_opcode = $rm_opcode$$constant;
2193 int base = $mem$$base;
2194 int index = $mem$$index;
2195 int scale = $mem$$scale;
2196 int displace = $mem$$disp;
2197 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
2198 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
2199 %}
2201 enc_class RegLea (rRegI dst, rRegI src0, immI src1 ) %{ // emit_reg_lea
2202 int reg_encoding = $dst$$reg;
2203 int base = $src0$$reg; // 0xFFFFFFFF indicates no base
2204 int index = 0x04; // 0x04 indicates no index
2205 int scale = 0x00; // 0x00 indicates no scale
2206 int displace = $src1$$constant; // 0x00 indicates no displacement
2207 relocInfo::relocType disp_reloc = relocInfo::none;
2208 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2209 %}
2211 enc_class min_enc (rRegI dst, rRegI src) %{ // MIN
2212 // Compare dst,src
2213 emit_opcode(cbuf,0x3B);
2214 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2215 // jmp dst < src around move
2216 emit_opcode(cbuf,0x7C);
2217 emit_d8(cbuf,2);
2218 // move dst,src
2219 emit_opcode(cbuf,0x8B);
2220 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2221 %}
2223 enc_class max_enc (rRegI dst, rRegI src) %{ // MAX
2224 // Compare dst,src
2225 emit_opcode(cbuf,0x3B);
2226 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2227 // jmp dst > src around move
2228 emit_opcode(cbuf,0x7F);
2229 emit_d8(cbuf,2);
2230 // move dst,src
2231 emit_opcode(cbuf,0x8B);
2232 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2233 %}
2235 enc_class enc_FPR_store(memory mem, regDPR src) %{
2236 // If src is FPR1, we can just FST to store it.
2237 // Else we need to FLD it to FPR1, then FSTP to store/pop it.
2238 int reg_encoding = 0x2; // Just store
2239 int base = $mem$$base;
2240 int index = $mem$$index;
2241 int scale = $mem$$scale;
2242 int displace = $mem$$disp;
2243 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
2244 if( $src$$reg != FPR1L_enc ) {
2245 reg_encoding = 0x3; // Store & pop
2246 emit_opcode( cbuf, 0xD9 ); // FLD (i.e., push it)
2247 emit_d8( cbuf, 0xC0-1+$src$$reg );
2248 }
2249 cbuf.set_insts_mark(); // Mark start of opcode for reloc info in mem operand
2250 emit_opcode(cbuf,$primary);
2251 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_reloc);
2252 %}
2254 enc_class neg_reg(rRegI dst) %{
2255 // NEG $dst
2256 emit_opcode(cbuf,0xF7);
2257 emit_rm(cbuf, 0x3, 0x03, $dst$$reg );
2258 %}
2260 enc_class setLT_reg(eCXRegI dst) %{
2261 // SETLT $dst
2262 emit_opcode(cbuf,0x0F);
2263 emit_opcode(cbuf,0x9C);
2264 emit_rm( cbuf, 0x3, 0x4, $dst$$reg );
2265 %}
2267 enc_class enc_cmpLTP(ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp) %{ // cadd_cmpLT
2268 int tmpReg = $tmp$$reg;
2270 // SUB $p,$q
2271 emit_opcode(cbuf,0x2B);
2272 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2273 // SBB $tmp,$tmp
2274 emit_opcode(cbuf,0x1B);
2275 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2276 // AND $tmp,$y
2277 emit_opcode(cbuf,0x23);
2278 emit_rm(cbuf, 0x3, tmpReg, $y$$reg);
2279 // ADD $p,$tmp
2280 emit_opcode(cbuf,0x03);
2281 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2282 %}
2284 enc_class shift_left_long( eRegL dst, eCXRegI shift ) %{
2285 // TEST shift,32
2286 emit_opcode(cbuf,0xF7);
2287 emit_rm(cbuf, 0x3, 0, ECX_enc);
2288 emit_d32(cbuf,0x20);
2289 // JEQ,s small
2290 emit_opcode(cbuf, 0x74);
2291 emit_d8(cbuf, 0x04);
2292 // MOV $dst.hi,$dst.lo
2293 emit_opcode( cbuf, 0x8B );
2294 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2295 // CLR $dst.lo
2296 emit_opcode(cbuf, 0x33);
2297 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
2298 // small:
2299 // SHLD $dst.hi,$dst.lo,$shift
2300 emit_opcode(cbuf,0x0F);
2301 emit_opcode(cbuf,0xA5);
2302 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2303 // SHL $dst.lo,$shift"
2304 emit_opcode(cbuf,0xD3);
2305 emit_rm(cbuf, 0x3, 0x4, $dst$$reg );
2306 %}
2308 enc_class shift_right_long( eRegL dst, eCXRegI shift ) %{
2309 // TEST shift,32
2310 emit_opcode(cbuf,0xF7);
2311 emit_rm(cbuf, 0x3, 0, ECX_enc);
2312 emit_d32(cbuf,0x20);
2313 // JEQ,s small
2314 emit_opcode(cbuf, 0x74);
2315 emit_d8(cbuf, 0x04);
2316 // MOV $dst.lo,$dst.hi
2317 emit_opcode( cbuf, 0x8B );
2318 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2319 // CLR $dst.hi
2320 emit_opcode(cbuf, 0x33);
2321 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($dst$$reg));
2322 // small:
2323 // SHRD $dst.lo,$dst.hi,$shift
2324 emit_opcode(cbuf,0x0F);
2325 emit_opcode(cbuf,0xAD);
2326 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2327 // SHR $dst.hi,$shift"
2328 emit_opcode(cbuf,0xD3);
2329 emit_rm(cbuf, 0x3, 0x5, HIGH_FROM_LOW($dst$$reg) );
2330 %}
2332 enc_class shift_right_arith_long( eRegL dst, eCXRegI shift ) %{
2333 // TEST shift,32
2334 emit_opcode(cbuf,0xF7);
2335 emit_rm(cbuf, 0x3, 0, ECX_enc);
2336 emit_d32(cbuf,0x20);
2337 // JEQ,s small
2338 emit_opcode(cbuf, 0x74);
2339 emit_d8(cbuf, 0x05);
2340 // MOV $dst.lo,$dst.hi
2341 emit_opcode( cbuf, 0x8B );
2342 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2343 // SAR $dst.hi,31
2344 emit_opcode(cbuf, 0xC1);
2345 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW($dst$$reg) );
2346 emit_d8(cbuf, 0x1F );
2347 // small:
2348 // SHRD $dst.lo,$dst.hi,$shift
2349 emit_opcode(cbuf,0x0F);
2350 emit_opcode(cbuf,0xAD);
2351 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2352 // SAR $dst.hi,$shift"
2353 emit_opcode(cbuf,0xD3);
2354 emit_rm(cbuf, 0x3, 0x7, HIGH_FROM_LOW($dst$$reg) );
2355 %}
2358 // ----------------- Encodings for floating point unit -----------------
2359 // May leave result in FPU-TOS or FPU reg depending on opcodes
2360 enc_class OpcReg_FPR(regFPR src) %{ // FMUL, FDIV
2361 $$$emit8$primary;
2362 emit_rm(cbuf, 0x3, $secondary, $src$$reg );
2363 %}
2365 // Pop argument in FPR0 with FSTP ST(0)
2366 enc_class PopFPU() %{
2367 emit_opcode( cbuf, 0xDD );
2368 emit_d8( cbuf, 0xD8 );
2369 %}
2371 // !!!!! equivalent to Pop_Reg_F
2372 enc_class Pop_Reg_DPR( regDPR dst ) %{
2373 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2374 emit_d8( cbuf, 0xD8+$dst$$reg );
2375 %}
2377 enc_class Push_Reg_DPR( regDPR dst ) %{
2378 emit_opcode( cbuf, 0xD9 );
2379 emit_d8( cbuf, 0xC0-1+$dst$$reg ); // FLD ST(i-1)
2380 %}
2382 enc_class strictfp_bias1( regDPR dst ) %{
2383 emit_opcode( cbuf, 0xDB ); // FLD m80real
2384 emit_opcode( cbuf, 0x2D );
2385 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias1() );
2386 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2387 emit_opcode( cbuf, 0xC8+$dst$$reg );
2388 %}
2390 enc_class strictfp_bias2( regDPR dst ) %{
2391 emit_opcode( cbuf, 0xDB ); // FLD m80real
2392 emit_opcode( cbuf, 0x2D );
2393 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias2() );
2394 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2395 emit_opcode( cbuf, 0xC8+$dst$$reg );
2396 %}
2398 // Special case for moving an integer register to a stack slot.
2399 enc_class OpcPRegSS( stackSlotI dst, rRegI src ) %{ // RegSS
2400 store_to_stackslot( cbuf, $primary, $src$$reg, $dst$$disp );
2401 %}
2403 // Special case for moving a register to a stack slot.
2404 enc_class RegSS( stackSlotI dst, rRegI src ) %{ // RegSS
2405 // Opcode already emitted
2406 emit_rm( cbuf, 0x02, $src$$reg, ESP_enc ); // R/M byte
2407 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
2408 emit_d32(cbuf, $dst$$disp); // Displacement
2409 %}
2411 // Push the integer in stackSlot 'src' onto FP-stack
2412 enc_class Push_Mem_I( memory src ) %{ // FILD [ESP+src]
2413 store_to_stackslot( cbuf, $primary, $secondary, $src$$disp );
2414 %}
2416 // Push FPU's TOS float to a stack-slot, and pop FPU-stack
2417 enc_class Pop_Mem_FPR( stackSlotF dst ) %{ // FSTP_S [ESP+dst]
2418 store_to_stackslot( cbuf, 0xD9, 0x03, $dst$$disp );
2419 %}
2421 // Same as Pop_Mem_F except for opcode
2422 // Push FPU's TOS double to a stack-slot, and pop FPU-stack
2423 enc_class Pop_Mem_DPR( stackSlotD dst ) %{ // FSTP_D [ESP+dst]
2424 store_to_stackslot( cbuf, 0xDD, 0x03, $dst$$disp );
2425 %}
2427 enc_class Pop_Reg_FPR( regFPR dst ) %{
2428 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2429 emit_d8( cbuf, 0xD8+$dst$$reg );
2430 %}
2432 enc_class Push_Reg_FPR( regFPR dst ) %{
2433 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2434 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2435 %}
2437 // Push FPU's float to a stack-slot, and pop FPU-stack
2438 enc_class Pop_Mem_Reg_FPR( stackSlotF dst, regFPR src ) %{
2439 int pop = 0x02;
2440 if ($src$$reg != FPR1L_enc) {
2441 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2442 emit_d8( cbuf, 0xC0-1+$src$$reg );
2443 pop = 0x03;
2444 }
2445 store_to_stackslot( cbuf, 0xD9, pop, $dst$$disp ); // FST<P>_S [ESP+dst]
2446 %}
2448 // Push FPU's double to a stack-slot, and pop FPU-stack
2449 enc_class Pop_Mem_Reg_DPR( stackSlotD dst, regDPR src ) %{
2450 int pop = 0x02;
2451 if ($src$$reg != FPR1L_enc) {
2452 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2453 emit_d8( cbuf, 0xC0-1+$src$$reg );
2454 pop = 0x03;
2455 }
2456 store_to_stackslot( cbuf, 0xDD, pop, $dst$$disp ); // FST<P>_D [ESP+dst]
2457 %}
2459 // Push FPU's double to a FPU-stack-slot, and pop FPU-stack
2460 enc_class Pop_Reg_Reg_DPR( regDPR dst, regFPR src ) %{
2461 int pop = 0xD0 - 1; // -1 since we skip FLD
2462 if ($src$$reg != FPR1L_enc) {
2463 emit_opcode( cbuf, 0xD9 ); // FLD ST(src-1)
2464 emit_d8( cbuf, 0xC0-1+$src$$reg );
2465 pop = 0xD8;
2466 }
2467 emit_opcode( cbuf, 0xDD );
2468 emit_d8( cbuf, pop+$dst$$reg ); // FST<P> ST(i)
2469 %}
2472 enc_class Push_Reg_Mod_DPR( regDPR dst, regDPR src) %{
2473 // load dst in FPR0
2474 emit_opcode( cbuf, 0xD9 );
2475 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2476 if ($src$$reg != FPR1L_enc) {
2477 // fincstp
2478 emit_opcode (cbuf, 0xD9);
2479 emit_opcode (cbuf, 0xF7);
2480 // swap src with FPR1:
2481 // FXCH FPR1 with src
2482 emit_opcode(cbuf, 0xD9);
2483 emit_d8(cbuf, 0xC8-1+$src$$reg );
2484 // fdecstp
2485 emit_opcode (cbuf, 0xD9);
2486 emit_opcode (cbuf, 0xF6);
2487 }
2488 %}
2490 enc_class Push_ModD_encoding(regD src0, regD src1) %{
2491 MacroAssembler _masm(&cbuf);
2492 __ subptr(rsp, 8);
2493 __ movdbl(Address(rsp, 0), $src1$$XMMRegister);
2494 __ fld_d(Address(rsp, 0));
2495 __ movdbl(Address(rsp, 0), $src0$$XMMRegister);
2496 __ fld_d(Address(rsp, 0));
2497 %}
2499 enc_class Push_ModF_encoding(regF src0, regF src1) %{
2500 MacroAssembler _masm(&cbuf);
2501 __ subptr(rsp, 4);
2502 __ movflt(Address(rsp, 0), $src1$$XMMRegister);
2503 __ fld_s(Address(rsp, 0));
2504 __ movflt(Address(rsp, 0), $src0$$XMMRegister);
2505 __ fld_s(Address(rsp, 0));
2506 %}
2508 enc_class Push_ResultD(regD dst) %{
2509 MacroAssembler _masm(&cbuf);
2510 __ fstp_d(Address(rsp, 0));
2511 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
2512 __ addptr(rsp, 8);
2513 %}
2515 enc_class Push_ResultF(regF dst, immI d8) %{
2516 MacroAssembler _masm(&cbuf);
2517 __ fstp_s(Address(rsp, 0));
2518 __ movflt($dst$$XMMRegister, Address(rsp, 0));
2519 __ addptr(rsp, $d8$$constant);
2520 %}
2522 enc_class Push_SrcD(regD src) %{
2523 MacroAssembler _masm(&cbuf);
2524 __ subptr(rsp, 8);
2525 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
2526 __ fld_d(Address(rsp, 0));
2527 %}
2529 enc_class push_stack_temp_qword() %{
2530 MacroAssembler _masm(&cbuf);
2531 __ subptr(rsp, 8);
2532 %}
2534 enc_class pop_stack_temp_qword() %{
2535 MacroAssembler _masm(&cbuf);
2536 __ addptr(rsp, 8);
2537 %}
2539 enc_class push_xmm_to_fpr1(regD src) %{
2540 MacroAssembler _masm(&cbuf);
2541 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
2542 __ fld_d(Address(rsp, 0));
2543 %}
2545 enc_class Push_Result_Mod_DPR( regDPR src) %{
2546 if ($src$$reg != FPR1L_enc) {
2547 // fincstp
2548 emit_opcode (cbuf, 0xD9);
2549 emit_opcode (cbuf, 0xF7);
2550 // FXCH FPR1 with src
2551 emit_opcode(cbuf, 0xD9);
2552 emit_d8(cbuf, 0xC8-1+$src$$reg );
2553 // fdecstp
2554 emit_opcode (cbuf, 0xD9);
2555 emit_opcode (cbuf, 0xF6);
2556 }
2557 // // following asm replaced with Pop_Reg_F or Pop_Mem_F
2558 // // FSTP FPR$dst$$reg
2559 // emit_opcode( cbuf, 0xDD );
2560 // emit_d8( cbuf, 0xD8+$dst$$reg );
2561 %}
2563 enc_class fnstsw_sahf_skip_parity() %{
2564 // fnstsw ax
2565 emit_opcode( cbuf, 0xDF );
2566 emit_opcode( cbuf, 0xE0 );
2567 // sahf
2568 emit_opcode( cbuf, 0x9E );
2569 // jnp ::skip
2570 emit_opcode( cbuf, 0x7B );
2571 emit_opcode( cbuf, 0x05 );
2572 %}
2574 enc_class emitModDPR() %{
2575 // fprem must be iterative
2576 // :: loop
2577 // fprem
2578 emit_opcode( cbuf, 0xD9 );
2579 emit_opcode( cbuf, 0xF8 );
2580 // wait
2581 emit_opcode( cbuf, 0x9b );
2582 // fnstsw ax
2583 emit_opcode( cbuf, 0xDF );
2584 emit_opcode( cbuf, 0xE0 );
2585 // sahf
2586 emit_opcode( cbuf, 0x9E );
2587 // jp ::loop
2588 emit_opcode( cbuf, 0x0F );
2589 emit_opcode( cbuf, 0x8A );
2590 emit_opcode( cbuf, 0xF4 );
2591 emit_opcode( cbuf, 0xFF );
2592 emit_opcode( cbuf, 0xFF );
2593 emit_opcode( cbuf, 0xFF );
2594 %}
2596 enc_class fpu_flags() %{
2597 // fnstsw_ax
2598 emit_opcode( cbuf, 0xDF);
2599 emit_opcode( cbuf, 0xE0);
2600 // test ax,0x0400
2601 emit_opcode( cbuf, 0x66 ); // operand-size prefix for 16-bit immediate
2602 emit_opcode( cbuf, 0xA9 );
2603 emit_d16 ( cbuf, 0x0400 );
2604 // // // This sequence works, but stalls for 12-16 cycles on PPro
2605 // // test rax,0x0400
2606 // emit_opcode( cbuf, 0xA9 );
2607 // emit_d32 ( cbuf, 0x00000400 );
2608 //
2609 // jz exit (no unordered comparison)
2610 emit_opcode( cbuf, 0x74 );
2611 emit_d8 ( cbuf, 0x02 );
2612 // mov ah,1 - treat as LT case (set carry flag)
2613 emit_opcode( cbuf, 0xB4 );
2614 emit_d8 ( cbuf, 0x01 );
2615 // sahf
2616 emit_opcode( cbuf, 0x9E);
2617 %}
2619 enc_class cmpF_P6_fixup() %{
2620 // Fixup the integer flags in case comparison involved a NaN
2621 //
2622 // JNP exit (no unordered comparison, P-flag is set by NaN)
2623 emit_opcode( cbuf, 0x7B );
2624 emit_d8 ( cbuf, 0x03 );
2625 // MOV AH,1 - treat as LT case (set carry flag)
2626 emit_opcode( cbuf, 0xB4 );
2627 emit_d8 ( cbuf, 0x01 );
2628 // SAHF
2629 emit_opcode( cbuf, 0x9E);
2630 // NOP // target for branch to avoid branch to branch
2631 emit_opcode( cbuf, 0x90);
2632 %}
2634 // fnstsw_ax();
2635 // sahf();
2636 // movl(dst, nan_result);
2637 // jcc(Assembler::parity, exit);
2638 // movl(dst, less_result);
2639 // jcc(Assembler::below, exit);
2640 // movl(dst, equal_result);
2641 // jcc(Assembler::equal, exit);
2642 // movl(dst, greater_result);
2644 // less_result = 1;
2645 // greater_result = -1;
2646 // equal_result = 0;
2647 // nan_result = -1;
2649 enc_class CmpF_Result(rRegI dst) %{
2650 // fnstsw_ax();
2651 emit_opcode( cbuf, 0xDF);
2652 emit_opcode( cbuf, 0xE0);
2653 // sahf
2654 emit_opcode( cbuf, 0x9E);
2655 // movl(dst, nan_result);
2656 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2657 emit_d32( cbuf, -1 );
2658 // jcc(Assembler::parity, exit);
2659 emit_opcode( cbuf, 0x7A );
2660 emit_d8 ( cbuf, 0x13 );
2661 // movl(dst, less_result);
2662 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2663 emit_d32( cbuf, -1 );
2664 // jcc(Assembler::below, exit);
2665 emit_opcode( cbuf, 0x72 );
2666 emit_d8 ( cbuf, 0x0C );
2667 // movl(dst, equal_result);
2668 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2669 emit_d32( cbuf, 0 );
2670 // jcc(Assembler::equal, exit);
2671 emit_opcode( cbuf, 0x74 );
2672 emit_d8 ( cbuf, 0x05 );
2673 // movl(dst, greater_result);
2674 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2675 emit_d32( cbuf, 1 );
2676 %}
2679 // Compare the longs and set flags
2680 // BROKEN! Do Not use as-is
2681 enc_class cmpl_test( eRegL src1, eRegL src2 ) %{
2682 // CMP $src1.hi,$src2.hi
2683 emit_opcode( cbuf, 0x3B );
2684 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2685 // JNE,s done
2686 emit_opcode(cbuf,0x75);
2687 emit_d8(cbuf, 2 );
2688 // CMP $src1.lo,$src2.lo
2689 emit_opcode( cbuf, 0x3B );
2690 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2691 // done:
2692 %}
2694 enc_class convert_int_long( regL dst, rRegI src ) %{
2695 // mov $dst.lo,$src
2696 int dst_encoding = $dst$$reg;
2697 int src_encoding = $src$$reg;
2698 encode_Copy( cbuf, dst_encoding , src_encoding );
2699 // mov $dst.hi,$src
2700 encode_Copy( cbuf, HIGH_FROM_LOW(dst_encoding), src_encoding );
2701 // sar $dst.hi,31
2702 emit_opcode( cbuf, 0xC1 );
2703 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW(dst_encoding) );
2704 emit_d8(cbuf, 0x1F );
2705 %}
2707 enc_class convert_long_double( eRegL src ) %{
2708 // push $src.hi
2709 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
2710 // push $src.lo
2711 emit_opcode(cbuf, 0x50+$src$$reg );
2712 // fild 64-bits at [SP]
2713 emit_opcode(cbuf,0xdf);
2714 emit_d8(cbuf, 0x6C);
2715 emit_d8(cbuf, 0x24);
2716 emit_d8(cbuf, 0x00);
2717 // pop stack
2718 emit_opcode(cbuf, 0x83); // add SP, #8
2719 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2720 emit_d8(cbuf, 0x8);
2721 %}
2723 enc_class multiply_con_and_shift_high( eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr ) %{
2724 // IMUL EDX:EAX,$src1
2725 emit_opcode( cbuf, 0xF7 );
2726 emit_rm( cbuf, 0x3, 0x5, $src1$$reg );
2727 // SAR EDX,$cnt-32
2728 int shift_count = ((int)$cnt$$constant) - 32;
2729 if (shift_count > 0) {
2730 emit_opcode(cbuf, 0xC1);
2731 emit_rm(cbuf, 0x3, 7, $dst$$reg );
2732 emit_d8(cbuf, shift_count);
2733 }
2734 %}
2736 // this version doesn't have add sp, 8
2737 enc_class convert_long_double2( eRegL src ) %{
2738 // push $src.hi
2739 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
2740 // push $src.lo
2741 emit_opcode(cbuf, 0x50+$src$$reg );
2742 // fild 64-bits at [SP]
2743 emit_opcode(cbuf,0xdf);
2744 emit_d8(cbuf, 0x6C);
2745 emit_d8(cbuf, 0x24);
2746 emit_d8(cbuf, 0x00);
2747 %}
2749 enc_class long_int_multiply( eADXRegL dst, nadxRegI src) %{
2750 // Basic idea: long = (long)int * (long)int
2751 // IMUL EDX:EAX, src
2752 emit_opcode( cbuf, 0xF7 );
2753 emit_rm( cbuf, 0x3, 0x5, $src$$reg);
2754 %}
2756 enc_class long_uint_multiply( eADXRegL dst, nadxRegI src) %{
2757 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
2758 // MUL EDX:EAX, src
2759 emit_opcode( cbuf, 0xF7 );
2760 emit_rm( cbuf, 0x3, 0x4, $src$$reg);
2761 %}
2763 enc_class long_multiply( eADXRegL dst, eRegL src, rRegI tmp ) %{
2764 // Basic idea: lo(result) = lo(x_lo * y_lo)
2765 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
2766 // MOV $tmp,$src.lo
2767 encode_Copy( cbuf, $tmp$$reg, $src$$reg );
2768 // IMUL $tmp,EDX
2769 emit_opcode( cbuf, 0x0F );
2770 emit_opcode( cbuf, 0xAF );
2771 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2772 // MOV EDX,$src.hi
2773 encode_Copy( cbuf, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg) );
2774 // IMUL EDX,EAX
2775 emit_opcode( cbuf, 0x0F );
2776 emit_opcode( cbuf, 0xAF );
2777 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2778 // ADD $tmp,EDX
2779 emit_opcode( cbuf, 0x03 );
2780 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2781 // MUL EDX:EAX,$src.lo
2782 emit_opcode( cbuf, 0xF7 );
2783 emit_rm( cbuf, 0x3, 0x4, $src$$reg );
2784 // ADD EDX,ESI
2785 emit_opcode( cbuf, 0x03 );
2786 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $tmp$$reg );
2787 %}
2789 enc_class long_multiply_con( eADXRegL dst, immL_127 src, rRegI tmp ) %{
2790 // Basic idea: lo(result) = lo(src * y_lo)
2791 // hi(result) = hi(src * y_lo) + lo(src * y_hi)
2792 // IMUL $tmp,EDX,$src
2793 emit_opcode( cbuf, 0x6B );
2794 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
2795 emit_d8( cbuf, (int)$src$$constant );
2796 // MOV EDX,$src
2797 emit_opcode(cbuf, 0xB8 + EDX_enc);
2798 emit_d32( cbuf, (int)$src$$constant );
2799 // MUL EDX:EAX,EDX
2800 emit_opcode( cbuf, 0xF7 );
2801 emit_rm( cbuf, 0x3, 0x4, EDX_enc );
2802 // ADD EDX,ESI
2803 emit_opcode( cbuf, 0x03 );
2804 emit_rm( cbuf, 0x3, EDX_enc, $tmp$$reg );
2805 %}
2807 enc_class long_div( eRegL src1, eRegL src2 ) %{
2808 // PUSH src1.hi
2809 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
2810 // PUSH src1.lo
2811 emit_opcode(cbuf, 0x50+$src1$$reg );
2812 // PUSH src2.hi
2813 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
2814 // PUSH src2.lo
2815 emit_opcode(cbuf, 0x50+$src2$$reg );
2816 // CALL directly to the runtime
2817 cbuf.set_insts_mark();
2818 emit_opcode(cbuf,0xE8); // Call into runtime
2819 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::ldiv) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
2820 // Restore stack
2821 emit_opcode(cbuf, 0x83); // add SP, #framesize
2822 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2823 emit_d8(cbuf, 4*4);
2824 %}
2826 enc_class long_mod( eRegL src1, eRegL src2 ) %{
2827 // PUSH src1.hi
2828 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
2829 // PUSH src1.lo
2830 emit_opcode(cbuf, 0x50+$src1$$reg );
2831 // PUSH src2.hi
2832 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
2833 // PUSH src2.lo
2834 emit_opcode(cbuf, 0x50+$src2$$reg );
2835 // CALL directly to the runtime
2836 cbuf.set_insts_mark();
2837 emit_opcode(cbuf,0xE8); // Call into runtime
2838 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::lrem ) - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
2839 // Restore stack
2840 emit_opcode(cbuf, 0x83); // add SP, #framesize
2841 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
2842 emit_d8(cbuf, 4*4);
2843 %}
2845 enc_class long_cmp_flags0( eRegL src, rRegI tmp ) %{
2846 // MOV $tmp,$src.lo
2847 emit_opcode(cbuf, 0x8B);
2848 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
2849 // OR $tmp,$src.hi
2850 emit_opcode(cbuf, 0x0B);
2851 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
2852 %}
2854 enc_class long_cmp_flags1( eRegL src1, eRegL src2 ) %{
2855 // CMP $src1.lo,$src2.lo
2856 emit_opcode( cbuf, 0x3B );
2857 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2858 // JNE,s skip
2859 emit_cc(cbuf, 0x70, 0x5);
2860 emit_d8(cbuf,2);
2861 // CMP $src1.hi,$src2.hi
2862 emit_opcode( cbuf, 0x3B );
2863 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2864 %}
2866 enc_class long_cmp_flags2( eRegL src1, eRegL src2, rRegI tmp ) %{
2867 // CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits
2868 emit_opcode( cbuf, 0x3B );
2869 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2870 // MOV $tmp,$src1.hi
2871 emit_opcode( cbuf, 0x8B );
2872 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src1$$reg) );
2873 // SBB $tmp,$src2.hi\t! Compute flags for long compare
2874 emit_opcode( cbuf, 0x1B );
2875 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src2$$reg) );
2876 %}
2878 enc_class long_cmp_flags3( eRegL src, rRegI tmp ) %{
2879 // XOR $tmp,$tmp
2880 emit_opcode(cbuf,0x33); // XOR
2881 emit_rm(cbuf,0x3, $tmp$$reg, $tmp$$reg);
2882 // CMP $tmp,$src.lo
2883 emit_opcode( cbuf, 0x3B );
2884 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg );
2885 // SBB $tmp,$src.hi
2886 emit_opcode( cbuf, 0x1B );
2887 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg) );
2888 %}
2890 // Sniff, sniff... smells like Gnu Superoptimizer
2891 enc_class neg_long( eRegL dst ) %{
2892 emit_opcode(cbuf,0xF7); // NEG hi
2893 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
2894 emit_opcode(cbuf,0xF7); // NEG lo
2895 emit_rm (cbuf,0x3, 0x3, $dst$$reg );
2896 emit_opcode(cbuf,0x83); // SBB hi,0
2897 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
2898 emit_d8 (cbuf,0 );
2899 %}
2901 enc_class enc_pop_rdx() %{
2902 emit_opcode(cbuf,0x5A);
2903 %}
2905 enc_class enc_rethrow() %{
2906 cbuf.set_insts_mark();
2907 emit_opcode(cbuf, 0xE9); // jmp entry
2908 emit_d32_reloc(cbuf, (int)OptoRuntime::rethrow_stub() - ((int)cbuf.insts_end())-4,
2909 runtime_call_Relocation::spec(), RELOC_IMM32 );
2910 %}
2913 // Convert a double to an int. Java semantics require we do complex
2914 // manglelations in the corner cases. So we set the rounding mode to
2915 // 'zero', store the darned double down as an int, and reset the
2916 // rounding mode to 'nearest'. The hardware throws an exception which
2917 // patches up the correct value directly to the stack.
2918 enc_class DPR2I_encoding( regDPR src ) %{
2919 // Flip to round-to-zero mode. We attempted to allow invalid-op
2920 // exceptions here, so that a NAN or other corner-case value will
2921 // thrown an exception (but normal values get converted at full speed).
2922 // However, I2C adapters and other float-stack manglers leave pending
2923 // invalid-op exceptions hanging. We would have to clear them before
2924 // enabling them and that is more expensive than just testing for the
2925 // invalid value Intel stores down in the corner cases.
2926 emit_opcode(cbuf,0xD9); // FLDCW trunc
2927 emit_opcode(cbuf,0x2D);
2928 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
2929 // Allocate a word
2930 emit_opcode(cbuf,0x83); // SUB ESP,4
2931 emit_opcode(cbuf,0xEC);
2932 emit_d8(cbuf,0x04);
2933 // Encoding assumes a double has been pushed into FPR0.
2934 // Store down the double as an int, popping the FPU stack
2935 emit_opcode(cbuf,0xDB); // FISTP [ESP]
2936 emit_opcode(cbuf,0x1C);
2937 emit_d8(cbuf,0x24);
2938 // Restore the rounding mode; mask the exception
2939 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
2940 emit_opcode(cbuf,0x2D);
2941 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
2942 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
2943 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
2945 // Load the converted int; adjust CPU stack
2946 emit_opcode(cbuf,0x58); // POP EAX
2947 emit_opcode(cbuf,0x3D); // CMP EAX,imm
2948 emit_d32 (cbuf,0x80000000); // 0x80000000
2949 emit_opcode(cbuf,0x75); // JNE around_slow_call
2950 emit_d8 (cbuf,0x07); // Size of slow_call
2951 // Push src onto stack slow-path
2952 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
2953 emit_d8 (cbuf,0xC0-1+$src$$reg );
2954 // CALL directly to the runtime
2955 cbuf.set_insts_mark();
2956 emit_opcode(cbuf,0xE8); // Call into runtime
2957 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
2958 // Carry on here...
2959 %}
2961 enc_class DPR2L_encoding( regDPR src ) %{
2962 emit_opcode(cbuf,0xD9); // FLDCW trunc
2963 emit_opcode(cbuf,0x2D);
2964 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
2965 // Allocate a word
2966 emit_opcode(cbuf,0x83); // SUB ESP,8
2967 emit_opcode(cbuf,0xEC);
2968 emit_d8(cbuf,0x08);
2969 // Encoding assumes a double has been pushed into FPR0.
2970 // Store down the double as a long, popping the FPU stack
2971 emit_opcode(cbuf,0xDF); // FISTP [ESP]
2972 emit_opcode(cbuf,0x3C);
2973 emit_d8(cbuf,0x24);
2974 // Restore the rounding mode; mask the exception
2975 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
2976 emit_opcode(cbuf,0x2D);
2977 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
2978 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
2979 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
2981 // Load the converted int; adjust CPU stack
2982 emit_opcode(cbuf,0x58); // POP EAX
2983 emit_opcode(cbuf,0x5A); // POP EDX
2984 emit_opcode(cbuf,0x81); // CMP EDX,imm
2985 emit_d8 (cbuf,0xFA); // rdx
2986 emit_d32 (cbuf,0x80000000); // 0x80000000
2987 emit_opcode(cbuf,0x75); // JNE around_slow_call
2988 emit_d8 (cbuf,0x07+4); // Size of slow_call
2989 emit_opcode(cbuf,0x85); // TEST EAX,EAX
2990 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
2991 emit_opcode(cbuf,0x75); // JNE around_slow_call
2992 emit_d8 (cbuf,0x07); // Size of slow_call
2993 // Push src onto stack slow-path
2994 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
2995 emit_d8 (cbuf,0xC0-1+$src$$reg );
2996 // CALL directly to the runtime
2997 cbuf.set_insts_mark();
2998 emit_opcode(cbuf,0xE8); // Call into runtime
2999 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.insts_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3000 // Carry on here...
3001 %}
3003 enc_class FMul_ST_reg( eRegFPR src1 ) %{
3004 // Operand was loaded from memory into fp ST (stack top)
3005 // FMUL ST,$src /* D8 C8+i */
3006 emit_opcode(cbuf, 0xD8);
3007 emit_opcode(cbuf, 0xC8 + $src1$$reg);
3008 %}
3010 enc_class FAdd_ST_reg( eRegFPR src2 ) %{
3011 // FADDP ST,src2 /* D8 C0+i */
3012 emit_opcode(cbuf, 0xD8);
3013 emit_opcode(cbuf, 0xC0 + $src2$$reg);
3014 //could use FADDP src2,fpST /* DE C0+i */
3015 %}
3017 enc_class FAddP_reg_ST( eRegFPR src2 ) %{
3018 // FADDP src2,ST /* DE C0+i */
3019 emit_opcode(cbuf, 0xDE);
3020 emit_opcode(cbuf, 0xC0 + $src2$$reg);
3021 %}
3023 enc_class subFPR_divFPR_encode( eRegFPR src1, eRegFPR src2) %{
3024 // Operand has been loaded into fp ST (stack top)
3025 // FSUB ST,$src1
3026 emit_opcode(cbuf, 0xD8);
3027 emit_opcode(cbuf, 0xE0 + $src1$$reg);
3029 // FDIV
3030 emit_opcode(cbuf, 0xD8);
3031 emit_opcode(cbuf, 0xF0 + $src2$$reg);
3032 %}
3034 enc_class MulFAddF (eRegFPR src1, eRegFPR src2) %{
3035 // Operand was loaded from memory into fp ST (stack top)
3036 // FADD ST,$src /* D8 C0+i */
3037 emit_opcode(cbuf, 0xD8);
3038 emit_opcode(cbuf, 0xC0 + $src1$$reg);
3040 // FMUL ST,src2 /* D8 C*+i */
3041 emit_opcode(cbuf, 0xD8);
3042 emit_opcode(cbuf, 0xC8 + $src2$$reg);
3043 %}
3046 enc_class MulFAddFreverse (eRegFPR src1, eRegFPR src2) %{
3047 // Operand was loaded from memory into fp ST (stack top)
3048 // FADD ST,$src /* D8 C0+i */
3049 emit_opcode(cbuf, 0xD8);
3050 emit_opcode(cbuf, 0xC0 + $src1$$reg);
3052 // FMULP src2,ST /* DE C8+i */
3053 emit_opcode(cbuf, 0xDE);
3054 emit_opcode(cbuf, 0xC8 + $src2$$reg);
3055 %}
3057 // Atomically load the volatile long
3058 enc_class enc_loadL_volatile( memory mem, stackSlotL dst ) %{
3059 emit_opcode(cbuf,0xDF);
3060 int rm_byte_opcode = 0x05;
3061 int base = $mem$$base;
3062 int index = $mem$$index;
3063 int scale = $mem$$scale;
3064 int displace = $mem$$disp;
3065 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
3066 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
3067 store_to_stackslot( cbuf, 0x0DF, 0x07, $dst$$disp );
3068 %}
3070 // Volatile Store Long. Must be atomic, so move it into
3071 // the FP TOS and then do a 64-bit FIST. Has to probe the
3072 // target address before the store (for null-ptr checks)
3073 // so the memory operand is used twice in the encoding.
3074 enc_class enc_storeL_volatile( memory mem, stackSlotL src ) %{
3075 store_to_stackslot( cbuf, 0x0DF, 0x05, $src$$disp );
3076 cbuf.set_insts_mark(); // Mark start of FIST in case $mem has an oop
3077 emit_opcode(cbuf,0xDF);
3078 int rm_byte_opcode = 0x07;
3079 int base = $mem$$base;
3080 int index = $mem$$index;
3081 int scale = $mem$$scale;
3082 int displace = $mem$$disp;
3083 relocInfo::relocType disp_reloc = $mem->disp_reloc(); // disp-as-oop when working with static globals
3084 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_reloc);
3085 %}
3087 // Safepoint Poll. This polls the safepoint page, and causes an
3088 // exception if it is not readable. Unfortunately, it kills the condition code
3089 // in the process
3090 // We current use TESTL [spp],EDI
3091 // A better choice might be TESTB [spp + pagesize() - CacheLineSize()],0
3093 enc_class Safepoint_Poll() %{
3094 cbuf.relocate(cbuf.insts_mark(), relocInfo::poll_type, 0);
3095 emit_opcode(cbuf,0x85);
3096 emit_rm (cbuf, 0x0, 0x7, 0x5);
3097 emit_d32(cbuf, (intptr_t)os::get_polling_page());
3098 %}
3099 %}
3102 //----------FRAME--------------------------------------------------------------
3103 // Definition of frame structure and management information.
3104 //
3105 // S T A C K L A Y O U T Allocators stack-slot number
3106 // | (to get allocators register number
3107 // G Owned by | | v add OptoReg::stack0())
3108 // r CALLER | |
3109 // o | +--------+ pad to even-align allocators stack-slot
3110 // w V | pad0 | numbers; owned by CALLER
3111 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned
3112 // h ^ | in | 5
3113 // | | args | 4 Holes in incoming args owned by SELF
3114 // | | | | 3
3115 // | | +--------+
3116 // V | | old out| Empty on Intel, window on Sparc
3117 // | old |preserve| Must be even aligned.
3118 // | SP-+--------+----> Matcher::_old_SP, even aligned
3119 // | | in | 3 area for Intel ret address
3120 // Owned by |preserve| Empty on Sparc.
3121 // SELF +--------+
3122 // | | pad2 | 2 pad to align old SP
3123 // | +--------+ 1
3124 // | | locks | 0
3125 // | +--------+----> OptoReg::stack0(), even aligned
3126 // | | pad1 | 11 pad to align new SP
3127 // | +--------+
3128 // | | | 10
3129 // | | spills | 9 spills
3130 // V | | 8 (pad0 slot for callee)
3131 // -----------+--------+----> Matcher::_out_arg_limit, unaligned
3132 // ^ | out | 7
3133 // | | args | 6 Holes in outgoing args owned by CALLEE
3134 // Owned by +--------+
3135 // CALLEE | new out| 6 Empty on Intel, window on Sparc
3136 // | new |preserve| Must be even-aligned.
3137 // | SP-+--------+----> Matcher::_new_SP, even aligned
3138 // | | |
3139 //
3140 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is
3141 // known from SELF's arguments and the Java calling convention.
3142 // Region 6-7 is determined per call site.
3143 // Note 2: If the calling convention leaves holes in the incoming argument
3144 // area, those holes are owned by SELF. Holes in the outgoing area
3145 // are owned by the CALLEE. Holes should not be nessecary in the
3146 // incoming area, as the Java calling convention is completely under
3147 // the control of the AD file. Doubles can be sorted and packed to
3148 // avoid holes. Holes in the outgoing arguments may be nessecary for
3149 // varargs C calling conventions.
3150 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is
3151 // even aligned with pad0 as needed.
3152 // Region 6 is even aligned. Region 6-7 is NOT even aligned;
3153 // region 6-11 is even aligned; it may be padded out more so that
3154 // the region from SP to FP meets the minimum stack alignment.
3156 frame %{
3157 // What direction does stack grow in (assumed to be same for C & Java)
3158 stack_direction(TOWARDS_LOW);
3160 // These three registers define part of the calling convention
3161 // between compiled code and the interpreter.
3162 inline_cache_reg(EAX); // Inline Cache Register
3163 interpreter_method_oop_reg(EBX); // Method Oop Register when calling interpreter
3165 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset]
3166 cisc_spilling_operand_name(indOffset32);
3168 // Number of stack slots consumed by locking an object
3169 sync_stack_slots(1);
3171 // Compiled code's Frame Pointer
3172 frame_pointer(ESP);
3173 // Interpreter stores its frame pointer in a register which is
3174 // stored to the stack by I2CAdaptors.
3175 // I2CAdaptors convert from interpreted java to compiled java.
3176 interpreter_frame_pointer(EBP);
3178 // Stack alignment requirement
3179 // Alignment size in bytes (128-bit -> 16 bytes)
3180 stack_alignment(StackAlignmentInBytes);
3182 // Number of stack slots between incoming argument block and the start of
3183 // a new frame. The PROLOG must add this many slots to the stack. The
3184 // EPILOG must remove this many slots. Intel needs one slot for
3185 // return address and one for rbp, (must save rbp)
3186 in_preserve_stack_slots(2+VerifyStackAtCalls);
3188 // Number of outgoing stack slots killed above the out_preserve_stack_slots
3189 // for calls to C. Supports the var-args backing area for register parms.
3190 varargs_C_out_slots_killed(0);
3192 // The after-PROLOG location of the return address. Location of
3193 // return address specifies a type (REG or STACK) and a number
3194 // representing the register number (i.e. - use a register name) or
3195 // stack slot.
3196 // Ret Addr is on stack in slot 0 if no locks or verification or alignment.
3197 // Otherwise, it is above the locks and verification slot and alignment word
3198 return_addr(STACK - 1 +
3199 round_to((Compile::current()->in_preserve_stack_slots() +
3200 Compile::current()->fixed_slots()),
3201 stack_alignment_in_slots()));
3203 // Body of function which returns an integer array locating
3204 // arguments either in registers or in stack slots. Passed an array
3205 // of ideal registers called "sig" and a "length" count. Stack-slot
3206 // offsets are based on outgoing arguments, i.e. a CALLER setting up
3207 // arguments for a CALLEE. Incoming stack arguments are
3208 // automatically biased by the preserve_stack_slots field above.
3209 calling_convention %{
3210 // No difference between ingoing/outgoing just pass false
3211 SharedRuntime::java_calling_convention(sig_bt, regs, length, false);
3212 %}
3215 // Body of function which returns an integer array locating
3216 // arguments either in registers or in stack slots. Passed an array
3217 // of ideal registers called "sig" and a "length" count. Stack-slot
3218 // offsets are based on outgoing arguments, i.e. a CALLER setting up
3219 // arguments for a CALLEE. Incoming stack arguments are
3220 // automatically biased by the preserve_stack_slots field above.
3221 c_calling_convention %{
3222 // This is obviously always outgoing
3223 (void) SharedRuntime::c_calling_convention(sig_bt, regs, /*regs2=*/NULL, length);
3224 %}
3226 // Location of C & interpreter return values
3227 c_return_value %{
3228 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
3229 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
3230 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
3232 // in SSE2+ mode we want to keep the FPU stack clean so pretend
3233 // that C functions return float and double results in XMM0.
3234 if( ideal_reg == Op_RegD && UseSSE>=2 )
3235 return OptoRegPair(XMM0b_num,XMM0_num);
3236 if( ideal_reg == Op_RegF && UseSSE>=2 )
3237 return OptoRegPair(OptoReg::Bad,XMM0_num);
3239 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
3240 %}
3242 // Location of return values
3243 return_value %{
3244 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
3245 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
3246 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
3247 if( ideal_reg == Op_RegD && UseSSE>=2 )
3248 return OptoRegPair(XMM0b_num,XMM0_num);
3249 if( ideal_reg == Op_RegF && UseSSE>=1 )
3250 return OptoRegPair(OptoReg::Bad,XMM0_num);
3251 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
3252 %}
3254 %}
3256 //----------ATTRIBUTES---------------------------------------------------------
3257 //----------Operand Attributes-------------------------------------------------
3258 op_attrib op_cost(0); // Required cost attribute
3260 //----------Instruction Attributes---------------------------------------------
3261 ins_attrib ins_cost(100); // Required cost attribute
3262 ins_attrib ins_size(8); // Required size attribute (in bits)
3263 ins_attrib ins_short_branch(0); // Required flag: is this instruction a
3264 // non-matching short branch variant of some
3265 // long branch?
3266 ins_attrib ins_alignment(1); // Required alignment attribute (must be a power of 2)
3267 // specifies the alignment that some part of the instruction (not
3268 // necessarily the start) requires. If > 1, a compute_padding()
3269 // function must be provided for the instruction
3271 //----------OPERANDS-----------------------------------------------------------
3272 // Operand definitions must precede instruction definitions for correct parsing
3273 // in the ADLC because operands constitute user defined types which are used in
3274 // instruction definitions.
3276 //----------Simple Operands----------------------------------------------------
3277 // Immediate Operands
3278 // Integer Immediate
3279 operand immI() %{
3280 match(ConI);
3282 op_cost(10);
3283 format %{ %}
3284 interface(CONST_INTER);
3285 %}
3287 // Constant for test vs zero
3288 operand immI0() %{
3289 predicate(n->get_int() == 0);
3290 match(ConI);
3292 op_cost(0);
3293 format %{ %}
3294 interface(CONST_INTER);
3295 %}
3297 // Constant for increment
3298 operand immI1() %{
3299 predicate(n->get_int() == 1);
3300 match(ConI);
3302 op_cost(0);
3303 format %{ %}
3304 interface(CONST_INTER);
3305 %}
3307 // Constant for decrement
3308 operand immI_M1() %{
3309 predicate(n->get_int() == -1);
3310 match(ConI);
3312 op_cost(0);
3313 format %{ %}
3314 interface(CONST_INTER);
3315 %}
3317 // Valid scale values for addressing modes
3318 operand immI2() %{
3319 predicate(0 <= n->get_int() && (n->get_int() <= 3));
3320 match(ConI);
3322 format %{ %}
3323 interface(CONST_INTER);
3324 %}
3326 operand immI8() %{
3327 predicate((-128 <= n->get_int()) && (n->get_int() <= 127));
3328 match(ConI);
3330 op_cost(5);
3331 format %{ %}
3332 interface(CONST_INTER);
3333 %}
3335 operand immI16() %{
3336 predicate((-32768 <= n->get_int()) && (n->get_int() <= 32767));
3337 match(ConI);
3339 op_cost(10);
3340 format %{ %}
3341 interface(CONST_INTER);
3342 %}
3344 // Int Immediate non-negative
3345 operand immU31()
3346 %{
3347 predicate(n->get_int() >= 0);
3348 match(ConI);
3350 op_cost(0);
3351 format %{ %}
3352 interface(CONST_INTER);
3353 %}
3355 // Constant for long shifts
3356 operand immI_32() %{
3357 predicate( n->get_int() == 32 );
3358 match(ConI);
3360 op_cost(0);
3361 format %{ %}
3362 interface(CONST_INTER);
3363 %}
3365 operand immI_1_31() %{
3366 predicate( n->get_int() >= 1 && n->get_int() <= 31 );
3367 match(ConI);
3369 op_cost(0);
3370 format %{ %}
3371 interface(CONST_INTER);
3372 %}
3374 operand immI_32_63() %{
3375 predicate( n->get_int() >= 32 && n->get_int() <= 63 );
3376 match(ConI);
3377 op_cost(0);
3379 format %{ %}
3380 interface(CONST_INTER);
3381 %}
3383 operand immI_1() %{
3384 predicate( n->get_int() == 1 );
3385 match(ConI);
3387 op_cost(0);
3388 format %{ %}
3389 interface(CONST_INTER);
3390 %}
3392 operand immI_2() %{
3393 predicate( n->get_int() == 2 );
3394 match(ConI);
3396 op_cost(0);
3397 format %{ %}
3398 interface(CONST_INTER);
3399 %}
3401 operand immI_3() %{
3402 predicate( n->get_int() == 3 );
3403 match(ConI);
3405 op_cost(0);
3406 format %{ %}
3407 interface(CONST_INTER);
3408 %}
3410 // Pointer Immediate
3411 operand immP() %{
3412 match(ConP);
3414 op_cost(10);
3415 format %{ %}
3416 interface(CONST_INTER);
3417 %}
3419 // NULL Pointer Immediate
3420 operand immP0() %{
3421 predicate( n->get_ptr() == 0 );
3422 match(ConP);
3423 op_cost(0);
3425 format %{ %}
3426 interface(CONST_INTER);
3427 %}
3429 // Long Immediate
3430 operand immL() %{
3431 match(ConL);
3433 op_cost(20);
3434 format %{ %}
3435 interface(CONST_INTER);
3436 %}
3438 // Long Immediate zero
3439 operand immL0() %{
3440 predicate( n->get_long() == 0L );
3441 match(ConL);
3442 op_cost(0);
3444 format %{ %}
3445 interface(CONST_INTER);
3446 %}
3448 // Long Immediate zero
3449 operand immL_M1() %{
3450 predicate( n->get_long() == -1L );
3451 match(ConL);
3452 op_cost(0);
3454 format %{ %}
3455 interface(CONST_INTER);
3456 %}
3458 // Long immediate from 0 to 127.
3459 // Used for a shorter form of long mul by 10.
3460 operand immL_127() %{
3461 predicate((0 <= n->get_long()) && (n->get_long() <= 127));
3462 match(ConL);
3463 op_cost(0);
3465 format %{ %}
3466 interface(CONST_INTER);
3467 %}
3469 // Long Immediate: low 32-bit mask
3470 operand immL_32bits() %{
3471 predicate(n->get_long() == 0xFFFFFFFFL);
3472 match(ConL);
3473 op_cost(0);
3475 format %{ %}
3476 interface(CONST_INTER);
3477 %}
3479 // Long Immediate: low 32-bit mask
3480 operand immL32() %{
3481 predicate(n->get_long() == (int)(n->get_long()));
3482 match(ConL);
3483 op_cost(20);
3485 format %{ %}
3486 interface(CONST_INTER);
3487 %}
3489 //Double Immediate zero
3490 operand immDPR0() %{
3491 // Do additional (and counter-intuitive) test against NaN to work around VC++
3492 // bug that generates code such that NaNs compare equal to 0.0
3493 predicate( UseSSE<=1 && n->getd() == 0.0 && !g_isnan(n->getd()) );
3494 match(ConD);
3496 op_cost(5);
3497 format %{ %}
3498 interface(CONST_INTER);
3499 %}
3501 // Double Immediate one
3502 operand immDPR1() %{
3503 predicate( UseSSE<=1 && n->getd() == 1.0 );
3504 match(ConD);
3506 op_cost(5);
3507 format %{ %}
3508 interface(CONST_INTER);
3509 %}
3511 // Double Immediate
3512 operand immDPR() %{
3513 predicate(UseSSE<=1);
3514 match(ConD);
3516 op_cost(5);
3517 format %{ %}
3518 interface(CONST_INTER);
3519 %}
3521 operand immD() %{
3522 predicate(UseSSE>=2);
3523 match(ConD);
3525 op_cost(5);
3526 format %{ %}
3527 interface(CONST_INTER);
3528 %}
3530 // Double Immediate zero
3531 operand immD0() %{
3532 // Do additional (and counter-intuitive) test against NaN to work around VC++
3533 // bug that generates code such that NaNs compare equal to 0.0 AND do not
3534 // compare equal to -0.0.
3535 predicate( UseSSE>=2 && jlong_cast(n->getd()) == 0 );
3536 match(ConD);
3538 format %{ %}
3539 interface(CONST_INTER);
3540 %}
3542 // Float Immediate zero
3543 operand immFPR0() %{
3544 predicate(UseSSE == 0 && n->getf() == 0.0F);
3545 match(ConF);
3547 op_cost(5);
3548 format %{ %}
3549 interface(CONST_INTER);
3550 %}
3552 // Float Immediate one
3553 operand immFPR1() %{
3554 predicate(UseSSE == 0 && n->getf() == 1.0F);
3555 match(ConF);
3557 op_cost(5);
3558 format %{ %}
3559 interface(CONST_INTER);
3560 %}
3562 // Float Immediate
3563 operand immFPR() %{
3564 predicate( UseSSE == 0 );
3565 match(ConF);
3567 op_cost(5);
3568 format %{ %}
3569 interface(CONST_INTER);
3570 %}
3572 // Float Immediate
3573 operand immF() %{
3574 predicate(UseSSE >= 1);
3575 match(ConF);
3577 op_cost(5);
3578 format %{ %}
3579 interface(CONST_INTER);
3580 %}
3582 // Float Immediate zero. Zero and not -0.0
3583 operand immF0() %{
3584 predicate( UseSSE >= 1 && jint_cast(n->getf()) == 0 );
3585 match(ConF);
3587 op_cost(5);
3588 format %{ %}
3589 interface(CONST_INTER);
3590 %}
3592 // Immediates for special shifts (sign extend)
3594 // Constants for increment
3595 operand immI_16() %{
3596 predicate( n->get_int() == 16 );
3597 match(ConI);
3599 format %{ %}
3600 interface(CONST_INTER);
3601 %}
3603 operand immI_24() %{
3604 predicate( n->get_int() == 24 );
3605 match(ConI);
3607 format %{ %}
3608 interface(CONST_INTER);
3609 %}
3611 // Constant for byte-wide masking
3612 operand immI_255() %{
3613 predicate( n->get_int() == 255 );
3614 match(ConI);
3616 format %{ %}
3617 interface(CONST_INTER);
3618 %}
3620 // Constant for short-wide masking
3621 operand immI_65535() %{
3622 predicate(n->get_int() == 65535);
3623 match(ConI);
3625 format %{ %}
3626 interface(CONST_INTER);
3627 %}
3629 // Register Operands
3630 // Integer Register
3631 operand rRegI() %{
3632 constraint(ALLOC_IN_RC(int_reg));
3633 match(RegI);
3634 match(xRegI);
3635 match(eAXRegI);
3636 match(eBXRegI);
3637 match(eCXRegI);
3638 match(eDXRegI);
3639 match(eDIRegI);
3640 match(eSIRegI);
3642 format %{ %}
3643 interface(REG_INTER);
3644 %}
3646 // Subset of Integer Register
3647 operand xRegI(rRegI reg) %{
3648 constraint(ALLOC_IN_RC(int_x_reg));
3649 match(reg);
3650 match(eAXRegI);
3651 match(eBXRegI);
3652 match(eCXRegI);
3653 match(eDXRegI);
3655 format %{ %}
3656 interface(REG_INTER);
3657 %}
3659 // Special Registers
3660 operand eAXRegI(xRegI reg) %{
3661 constraint(ALLOC_IN_RC(eax_reg));
3662 match(reg);
3663 match(rRegI);
3665 format %{ "EAX" %}
3666 interface(REG_INTER);
3667 %}
3669 // Special Registers
3670 operand eBXRegI(xRegI reg) %{
3671 constraint(ALLOC_IN_RC(ebx_reg));
3672 match(reg);
3673 match(rRegI);
3675 format %{ "EBX" %}
3676 interface(REG_INTER);
3677 %}
3679 operand eCXRegI(xRegI reg) %{
3680 constraint(ALLOC_IN_RC(ecx_reg));
3681 match(reg);
3682 match(rRegI);
3684 format %{ "ECX" %}
3685 interface(REG_INTER);
3686 %}
3688 operand eDXRegI(xRegI reg) %{
3689 constraint(ALLOC_IN_RC(edx_reg));
3690 match(reg);
3691 match(rRegI);
3693 format %{ "EDX" %}
3694 interface(REG_INTER);
3695 %}
3697 operand eDIRegI(xRegI reg) %{
3698 constraint(ALLOC_IN_RC(edi_reg));
3699 match(reg);
3700 match(rRegI);
3702 format %{ "EDI" %}
3703 interface(REG_INTER);
3704 %}
3706 operand naxRegI() %{
3707 constraint(ALLOC_IN_RC(nax_reg));
3708 match(RegI);
3709 match(eCXRegI);
3710 match(eDXRegI);
3711 match(eSIRegI);
3712 match(eDIRegI);
3714 format %{ %}
3715 interface(REG_INTER);
3716 %}
3718 operand nadxRegI() %{
3719 constraint(ALLOC_IN_RC(nadx_reg));
3720 match(RegI);
3721 match(eBXRegI);
3722 match(eCXRegI);
3723 match(eSIRegI);
3724 match(eDIRegI);
3726 format %{ %}
3727 interface(REG_INTER);
3728 %}
3730 operand ncxRegI() %{
3731 constraint(ALLOC_IN_RC(ncx_reg));
3732 match(RegI);
3733 match(eAXRegI);
3734 match(eDXRegI);
3735 match(eSIRegI);
3736 match(eDIRegI);
3738 format %{ %}
3739 interface(REG_INTER);
3740 %}
3742 // // This operand was used by cmpFastUnlock, but conflicted with 'object' reg
3743 // //
3744 operand eSIRegI(xRegI reg) %{
3745 constraint(ALLOC_IN_RC(esi_reg));
3746 match(reg);
3747 match(rRegI);
3749 format %{ "ESI" %}
3750 interface(REG_INTER);
3751 %}
3753 // Pointer Register
3754 operand anyRegP() %{
3755 constraint(ALLOC_IN_RC(any_reg));
3756 match(RegP);
3757 match(eAXRegP);
3758 match(eBXRegP);
3759 match(eCXRegP);
3760 match(eDIRegP);
3761 match(eRegP);
3763 format %{ %}
3764 interface(REG_INTER);
3765 %}
3767 operand eRegP() %{
3768 constraint(ALLOC_IN_RC(int_reg));
3769 match(RegP);
3770 match(eAXRegP);
3771 match(eBXRegP);
3772 match(eCXRegP);
3773 match(eDIRegP);
3775 format %{ %}
3776 interface(REG_INTER);
3777 %}
3779 // On windows95, EBP is not safe to use for implicit null tests.
3780 operand eRegP_no_EBP() %{
3781 constraint(ALLOC_IN_RC(int_reg_no_ebp));
3782 match(RegP);
3783 match(eAXRegP);
3784 match(eBXRegP);
3785 match(eCXRegP);
3786 match(eDIRegP);
3788 op_cost(100);
3789 format %{ %}
3790 interface(REG_INTER);
3791 %}
3793 operand naxRegP() %{
3794 constraint(ALLOC_IN_RC(nax_reg));
3795 match(RegP);
3796 match(eBXRegP);
3797 match(eDXRegP);
3798 match(eCXRegP);
3799 match(eSIRegP);
3800 match(eDIRegP);
3802 format %{ %}
3803 interface(REG_INTER);
3804 %}
3806 operand nabxRegP() %{
3807 constraint(ALLOC_IN_RC(nabx_reg));
3808 match(RegP);
3809 match(eCXRegP);
3810 match(eDXRegP);
3811 match(eSIRegP);
3812 match(eDIRegP);
3814 format %{ %}
3815 interface(REG_INTER);
3816 %}
3818 operand pRegP() %{
3819 constraint(ALLOC_IN_RC(p_reg));
3820 match(RegP);
3821 match(eBXRegP);
3822 match(eDXRegP);
3823 match(eSIRegP);
3824 match(eDIRegP);
3826 format %{ %}
3827 interface(REG_INTER);
3828 %}
3830 // Special Registers
3831 // Return a pointer value
3832 operand eAXRegP(eRegP reg) %{
3833 constraint(ALLOC_IN_RC(eax_reg));
3834 match(reg);
3835 format %{ "EAX" %}
3836 interface(REG_INTER);
3837 %}
3839 // Used in AtomicAdd
3840 operand eBXRegP(eRegP reg) %{
3841 constraint(ALLOC_IN_RC(ebx_reg));
3842 match(reg);
3843 format %{ "EBX" %}
3844 interface(REG_INTER);
3845 %}
3847 // Tail-call (interprocedural jump) to interpreter
3848 operand eCXRegP(eRegP reg) %{
3849 constraint(ALLOC_IN_RC(ecx_reg));
3850 match(reg);
3851 format %{ "ECX" %}
3852 interface(REG_INTER);
3853 %}
3855 operand eSIRegP(eRegP reg) %{
3856 constraint(ALLOC_IN_RC(esi_reg));
3857 match(reg);
3858 format %{ "ESI" %}
3859 interface(REG_INTER);
3860 %}
3862 // Used in rep stosw
3863 operand eDIRegP(eRegP reg) %{
3864 constraint(ALLOC_IN_RC(edi_reg));
3865 match(reg);
3866 format %{ "EDI" %}
3867 interface(REG_INTER);
3868 %}
3870 operand eRegL() %{
3871 constraint(ALLOC_IN_RC(long_reg));
3872 match(RegL);
3873 match(eADXRegL);
3875 format %{ %}
3876 interface(REG_INTER);
3877 %}
3879 operand eADXRegL( eRegL reg ) %{
3880 constraint(ALLOC_IN_RC(eadx_reg));
3881 match(reg);
3883 format %{ "EDX:EAX" %}
3884 interface(REG_INTER);
3885 %}
3887 operand eBCXRegL( eRegL reg ) %{
3888 constraint(ALLOC_IN_RC(ebcx_reg));
3889 match(reg);
3891 format %{ "EBX:ECX" %}
3892 interface(REG_INTER);
3893 %}
3895 // Special case for integer high multiply
3896 operand eADXRegL_low_only() %{
3897 constraint(ALLOC_IN_RC(eadx_reg));
3898 match(RegL);
3900 format %{ "EAX" %}
3901 interface(REG_INTER);
3902 %}
3904 // Flags register, used as output of compare instructions
3905 operand eFlagsReg() %{
3906 constraint(ALLOC_IN_RC(int_flags));
3907 match(RegFlags);
3909 format %{ "EFLAGS" %}
3910 interface(REG_INTER);
3911 %}
3913 // Flags register, used as output of FLOATING POINT compare instructions
3914 operand eFlagsRegU() %{
3915 constraint(ALLOC_IN_RC(int_flags));
3916 match(RegFlags);
3918 format %{ "EFLAGS_U" %}
3919 interface(REG_INTER);
3920 %}
3922 operand eFlagsRegUCF() %{
3923 constraint(ALLOC_IN_RC(int_flags));
3924 match(RegFlags);
3925 predicate(false);
3927 format %{ "EFLAGS_U_CF" %}
3928 interface(REG_INTER);
3929 %}
3931 // Condition Code Register used by long compare
3932 operand flagsReg_long_LTGE() %{
3933 constraint(ALLOC_IN_RC(int_flags));
3934 match(RegFlags);
3935 format %{ "FLAGS_LTGE" %}
3936 interface(REG_INTER);
3937 %}
3938 operand flagsReg_long_EQNE() %{
3939 constraint(ALLOC_IN_RC(int_flags));
3940 match(RegFlags);
3941 format %{ "FLAGS_EQNE" %}
3942 interface(REG_INTER);
3943 %}
3944 operand flagsReg_long_LEGT() %{
3945 constraint(ALLOC_IN_RC(int_flags));
3946 match(RegFlags);
3947 format %{ "FLAGS_LEGT" %}
3948 interface(REG_INTER);
3949 %}
3951 // Condition Code Register used by unsigned long compare
3952 operand flagsReg_ulong_LTGE() %{
3953 constraint(ALLOC_IN_RC(int_flags));
3954 match(RegFlags);
3955 format %{ "FLAGS_U_LTGE" %}
3956 interface(REG_INTER);
3957 %}
3958 operand flagsReg_ulong_EQNE() %{
3959 constraint(ALLOC_IN_RC(int_flags));
3960 match(RegFlags);
3961 format %{ "FLAGS_U_EQNE" %}
3962 interface(REG_INTER);
3963 %}
3964 operand flagsReg_ulong_LEGT() %{
3965 constraint(ALLOC_IN_RC(int_flags));
3966 match(RegFlags);
3967 format %{ "FLAGS_U_LEGT" %}
3968 interface(REG_INTER);
3969 %}
3971 // Float register operands
3972 operand regDPR() %{
3973 predicate( UseSSE < 2 );
3974 constraint(ALLOC_IN_RC(fp_dbl_reg));
3975 match(RegD);
3976 match(regDPR1);
3977 match(regDPR2);
3978 format %{ %}
3979 interface(REG_INTER);
3980 %}
3982 operand regDPR1(regDPR reg) %{
3983 predicate( UseSSE < 2 );
3984 constraint(ALLOC_IN_RC(fp_dbl_reg0));
3985 match(reg);
3986 format %{ "FPR1" %}
3987 interface(REG_INTER);
3988 %}
3990 operand regDPR2(regDPR reg) %{
3991 predicate( UseSSE < 2 );
3992 constraint(ALLOC_IN_RC(fp_dbl_reg1));
3993 match(reg);
3994 format %{ "FPR2" %}
3995 interface(REG_INTER);
3996 %}
3998 operand regnotDPR1(regDPR reg) %{
3999 predicate( UseSSE < 2 );
4000 constraint(ALLOC_IN_RC(fp_dbl_notreg0));
4001 match(reg);
4002 format %{ %}
4003 interface(REG_INTER);
4004 %}
4006 // Float register operands
4007 operand regFPR() %{
4008 predicate( UseSSE < 2 );
4009 constraint(ALLOC_IN_RC(fp_flt_reg));
4010 match(RegF);
4011 match(regFPR1);
4012 format %{ %}
4013 interface(REG_INTER);
4014 %}
4016 // Float register operands
4017 operand regFPR1(regFPR reg) %{
4018 predicate( UseSSE < 2 );
4019 constraint(ALLOC_IN_RC(fp_flt_reg0));
4020 match(reg);
4021 format %{ "FPR1" %}
4022 interface(REG_INTER);
4023 %}
4025 // XMM Float register operands
4026 operand regF() %{
4027 predicate( UseSSE>=1 );
4028 constraint(ALLOC_IN_RC(float_reg));
4029 match(RegF);
4030 format %{ %}
4031 interface(REG_INTER);
4032 %}
4034 // XMM Double register operands
4035 operand regD() %{
4036 predicate( UseSSE>=2 );
4037 constraint(ALLOC_IN_RC(double_reg));
4038 match(RegD);
4039 format %{ %}
4040 interface(REG_INTER);
4041 %}
4044 //----------Memory Operands----------------------------------------------------
4045 // Direct Memory Operand
4046 operand direct(immP addr) %{
4047 match(addr);
4049 format %{ "[$addr]" %}
4050 interface(MEMORY_INTER) %{
4051 base(0xFFFFFFFF);
4052 index(0x4);
4053 scale(0x0);
4054 disp($addr);
4055 %}
4056 %}
4058 // Indirect Memory Operand
4059 operand indirect(eRegP reg) %{
4060 constraint(ALLOC_IN_RC(int_reg));
4061 match(reg);
4063 format %{ "[$reg]" %}
4064 interface(MEMORY_INTER) %{
4065 base($reg);
4066 index(0x4);
4067 scale(0x0);
4068 disp(0x0);
4069 %}
4070 %}
4072 // Indirect Memory Plus Short Offset Operand
4073 operand indOffset8(eRegP reg, immI8 off) %{
4074 match(AddP reg off);
4076 format %{ "[$reg + $off]" %}
4077 interface(MEMORY_INTER) %{
4078 base($reg);
4079 index(0x4);
4080 scale(0x0);
4081 disp($off);
4082 %}
4083 %}
4085 // Indirect Memory Plus Long Offset Operand
4086 operand indOffset32(eRegP reg, immI off) %{
4087 match(AddP reg off);
4089 format %{ "[$reg + $off]" %}
4090 interface(MEMORY_INTER) %{
4091 base($reg);
4092 index(0x4);
4093 scale(0x0);
4094 disp($off);
4095 %}
4096 %}
4098 // Indirect Memory Plus Long Offset Operand
4099 operand indOffset32X(rRegI reg, immP off) %{
4100 match(AddP off reg);
4102 format %{ "[$reg + $off]" %}
4103 interface(MEMORY_INTER) %{
4104 base($reg);
4105 index(0x4);
4106 scale(0x0);
4107 disp($off);
4108 %}
4109 %}
4111 // Indirect Memory Plus Index Register Plus Offset Operand
4112 operand indIndexOffset(eRegP reg, rRegI ireg, immI off) %{
4113 match(AddP (AddP reg ireg) off);
4115 op_cost(10);
4116 format %{"[$reg + $off + $ireg]" %}
4117 interface(MEMORY_INTER) %{
4118 base($reg);
4119 index($ireg);
4120 scale(0x0);
4121 disp($off);
4122 %}
4123 %}
4125 // Indirect Memory Plus Index Register Plus Offset Operand
4126 operand indIndex(eRegP reg, rRegI ireg) %{
4127 match(AddP reg ireg);
4129 op_cost(10);
4130 format %{"[$reg + $ireg]" %}
4131 interface(MEMORY_INTER) %{
4132 base($reg);
4133 index($ireg);
4134 scale(0x0);
4135 disp(0x0);
4136 %}
4137 %}
4139 // // -------------------------------------------------------------------------
4140 // // 486 architecture doesn't support "scale * index + offset" with out a base
4141 // // -------------------------------------------------------------------------
4142 // // Scaled Memory Operands
4143 // // Indirect Memory Times Scale Plus Offset Operand
4144 // operand indScaleOffset(immP off, rRegI ireg, immI2 scale) %{
4145 // match(AddP off (LShiftI ireg scale));
4146 //
4147 // op_cost(10);
4148 // format %{"[$off + $ireg << $scale]" %}
4149 // interface(MEMORY_INTER) %{
4150 // base(0x4);
4151 // index($ireg);
4152 // scale($scale);
4153 // disp($off);
4154 // %}
4155 // %}
4157 // Indirect Memory Times Scale Plus Index Register
4158 operand indIndexScale(eRegP reg, rRegI ireg, immI2 scale) %{
4159 match(AddP reg (LShiftI ireg scale));
4161 op_cost(10);
4162 format %{"[$reg + $ireg << $scale]" %}
4163 interface(MEMORY_INTER) %{
4164 base($reg);
4165 index($ireg);
4166 scale($scale);
4167 disp(0x0);
4168 %}
4169 %}
4171 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
4172 operand indIndexScaleOffset(eRegP reg, immI off, rRegI ireg, immI2 scale) %{
4173 match(AddP (AddP reg (LShiftI ireg scale)) off);
4175 op_cost(10);
4176 format %{"[$reg + $off + $ireg << $scale]" %}
4177 interface(MEMORY_INTER) %{
4178 base($reg);
4179 index($ireg);
4180 scale($scale);
4181 disp($off);
4182 %}
4183 %}
4185 //----------Load Long Memory Operands------------------------------------------
4186 // The load-long idiom will use it's address expression again after loading
4187 // the first word of the long. If the load-long destination overlaps with
4188 // registers used in the addressing expression, the 2nd half will be loaded
4189 // from a clobbered address. Fix this by requiring that load-long use
4190 // address registers that do not overlap with the load-long target.
4192 // load-long support
4193 operand load_long_RegP() %{
4194 constraint(ALLOC_IN_RC(esi_reg));
4195 match(RegP);
4196 match(eSIRegP);
4197 op_cost(100);
4198 format %{ %}
4199 interface(REG_INTER);
4200 %}
4202 // Indirect Memory Operand Long
4203 operand load_long_indirect(load_long_RegP reg) %{
4204 constraint(ALLOC_IN_RC(esi_reg));
4205 match(reg);
4207 format %{ "[$reg]" %}
4208 interface(MEMORY_INTER) %{
4209 base($reg);
4210 index(0x4);
4211 scale(0x0);
4212 disp(0x0);
4213 %}
4214 %}
4216 // Indirect Memory Plus Long Offset Operand
4217 operand load_long_indOffset32(load_long_RegP reg, immI off) %{
4218 match(AddP reg off);
4220 format %{ "[$reg + $off]" %}
4221 interface(MEMORY_INTER) %{
4222 base($reg);
4223 index(0x4);
4224 scale(0x0);
4225 disp($off);
4226 %}
4227 %}
4229 opclass load_long_memory(load_long_indirect, load_long_indOffset32);
4232 //----------Special Memory Operands--------------------------------------------
4233 // Stack Slot Operand - This operand is used for loading and storing temporary
4234 // values on the stack where a match requires a value to
4235 // flow through memory.
4236 operand stackSlotP(sRegP reg) %{
4237 constraint(ALLOC_IN_RC(stack_slots));
4238 // No match rule because this operand is only generated in matching
4239 format %{ "[$reg]" %}
4240 interface(MEMORY_INTER) %{
4241 base(0x4); // ESP
4242 index(0x4); // No Index
4243 scale(0x0); // No Scale
4244 disp($reg); // Stack Offset
4245 %}
4246 %}
4248 operand stackSlotI(sRegI reg) %{
4249 constraint(ALLOC_IN_RC(stack_slots));
4250 // No match rule because this operand is only generated in matching
4251 format %{ "[$reg]" %}
4252 interface(MEMORY_INTER) %{
4253 base(0x4); // ESP
4254 index(0x4); // No Index
4255 scale(0x0); // No Scale
4256 disp($reg); // Stack Offset
4257 %}
4258 %}
4260 operand stackSlotF(sRegF reg) %{
4261 constraint(ALLOC_IN_RC(stack_slots));
4262 // No match rule because this operand is only generated in matching
4263 format %{ "[$reg]" %}
4264 interface(MEMORY_INTER) %{
4265 base(0x4); // ESP
4266 index(0x4); // No Index
4267 scale(0x0); // No Scale
4268 disp($reg); // Stack Offset
4269 %}
4270 %}
4272 operand stackSlotD(sRegD reg) %{
4273 constraint(ALLOC_IN_RC(stack_slots));
4274 // No match rule because this operand is only generated in matching
4275 format %{ "[$reg]" %}
4276 interface(MEMORY_INTER) %{
4277 base(0x4); // ESP
4278 index(0x4); // No Index
4279 scale(0x0); // No Scale
4280 disp($reg); // Stack Offset
4281 %}
4282 %}
4284 operand stackSlotL(sRegL reg) %{
4285 constraint(ALLOC_IN_RC(stack_slots));
4286 // No match rule because this operand is only generated in matching
4287 format %{ "[$reg]" %}
4288 interface(MEMORY_INTER) %{
4289 base(0x4); // ESP
4290 index(0x4); // No Index
4291 scale(0x0); // No Scale
4292 disp($reg); // Stack Offset
4293 %}
4294 %}
4296 //----------Memory Operands - Win95 Implicit Null Variants----------------
4297 // Indirect Memory Operand
4298 operand indirect_win95_safe(eRegP_no_EBP reg)
4299 %{
4300 constraint(ALLOC_IN_RC(int_reg));
4301 match(reg);
4303 op_cost(100);
4304 format %{ "[$reg]" %}
4305 interface(MEMORY_INTER) %{
4306 base($reg);
4307 index(0x4);
4308 scale(0x0);
4309 disp(0x0);
4310 %}
4311 %}
4313 // Indirect Memory Plus Short Offset Operand
4314 operand indOffset8_win95_safe(eRegP_no_EBP reg, immI8 off)
4315 %{
4316 match(AddP reg off);
4318 op_cost(100);
4319 format %{ "[$reg + $off]" %}
4320 interface(MEMORY_INTER) %{
4321 base($reg);
4322 index(0x4);
4323 scale(0x0);
4324 disp($off);
4325 %}
4326 %}
4328 // Indirect Memory Plus Long Offset Operand
4329 operand indOffset32_win95_safe(eRegP_no_EBP reg, immI off)
4330 %{
4331 match(AddP reg off);
4333 op_cost(100);
4334 format %{ "[$reg + $off]" %}
4335 interface(MEMORY_INTER) %{
4336 base($reg);
4337 index(0x4);
4338 scale(0x0);
4339 disp($off);
4340 %}
4341 %}
4343 // Indirect Memory Plus Index Register Plus Offset Operand
4344 operand indIndexOffset_win95_safe(eRegP_no_EBP reg, rRegI ireg, immI off)
4345 %{
4346 match(AddP (AddP reg ireg) off);
4348 op_cost(100);
4349 format %{"[$reg + $off + $ireg]" %}
4350 interface(MEMORY_INTER) %{
4351 base($reg);
4352 index($ireg);
4353 scale(0x0);
4354 disp($off);
4355 %}
4356 %}
4358 // Indirect Memory Times Scale Plus Index Register
4359 operand indIndexScale_win95_safe(eRegP_no_EBP reg, rRegI ireg, immI2 scale)
4360 %{
4361 match(AddP reg (LShiftI ireg scale));
4363 op_cost(100);
4364 format %{"[$reg + $ireg << $scale]" %}
4365 interface(MEMORY_INTER) %{
4366 base($reg);
4367 index($ireg);
4368 scale($scale);
4369 disp(0x0);
4370 %}
4371 %}
4373 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
4374 operand indIndexScaleOffset_win95_safe(eRegP_no_EBP reg, immI off, rRegI ireg, immI2 scale)
4375 %{
4376 match(AddP (AddP reg (LShiftI ireg scale)) off);
4378 op_cost(100);
4379 format %{"[$reg + $off + $ireg << $scale]" %}
4380 interface(MEMORY_INTER) %{
4381 base($reg);
4382 index($ireg);
4383 scale($scale);
4384 disp($off);
4385 %}
4386 %}
4388 //----------Conditional Branch Operands----------------------------------------
4389 // Comparison Op - This is the operation of the comparison, and is limited to
4390 // the following set of codes:
4391 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=)
4392 //
4393 // Other attributes of the comparison, such as unsignedness, are specified
4394 // by the comparison instruction that sets a condition code flags register.
4395 // That result is represented by a flags operand whose subtype is appropriate
4396 // to the unsignedness (etc.) of the comparison.
4397 //
4398 // Later, the instruction which matches both the Comparison Op (a Bool) and
4399 // the flags (produced by the Cmp) specifies the coding of the comparison op
4400 // by matching a specific subtype of Bool operand below, such as cmpOpU.
4402 // Comparision Code
4403 operand cmpOp() %{
4404 match(Bool);
4406 format %{ "" %}
4407 interface(COND_INTER) %{
4408 equal(0x4, "e");
4409 not_equal(0x5, "ne");
4410 less(0xC, "l");
4411 greater_equal(0xD, "ge");
4412 less_equal(0xE, "le");
4413 greater(0xF, "g");
4414 overflow(0x0, "o");
4415 no_overflow(0x1, "no");
4416 %}
4417 %}
4419 // Comparison Code, unsigned compare. Used by FP also, with
4420 // C2 (unordered) turned into GT or LT already. The other bits
4421 // C0 and C3 are turned into Carry & Zero flags.
4422 operand cmpOpU() %{
4423 match(Bool);
4425 format %{ "" %}
4426 interface(COND_INTER) %{
4427 equal(0x4, "e");
4428 not_equal(0x5, "ne");
4429 less(0x2, "b");
4430 greater_equal(0x3, "nb");
4431 less_equal(0x6, "be");
4432 greater(0x7, "nbe");
4433 overflow(0x0, "o");
4434 no_overflow(0x1, "no");
4435 %}
4436 %}
4438 // Floating comparisons that don't require any fixup for the unordered case
4439 operand cmpOpUCF() %{
4440 match(Bool);
4441 predicate(n->as_Bool()->_test._test == BoolTest::lt ||
4442 n->as_Bool()->_test._test == BoolTest::ge ||
4443 n->as_Bool()->_test._test == BoolTest::le ||
4444 n->as_Bool()->_test._test == BoolTest::gt);
4445 format %{ "" %}
4446 interface(COND_INTER) %{
4447 equal(0x4, "e");
4448 not_equal(0x5, "ne");
4449 less(0x2, "b");
4450 greater_equal(0x3, "nb");
4451 less_equal(0x6, "be");
4452 greater(0x7, "nbe");
4453 overflow(0x0, "o");
4454 no_overflow(0x1, "no");
4455 %}
4456 %}
4459 // Floating comparisons that can be fixed up with extra conditional jumps
4460 operand cmpOpUCF2() %{
4461 match(Bool);
4462 predicate(n->as_Bool()->_test._test == BoolTest::ne ||
4463 n->as_Bool()->_test._test == BoolTest::eq);
4464 format %{ "" %}
4465 interface(COND_INTER) %{
4466 equal(0x4, "e");
4467 not_equal(0x5, "ne");
4468 less(0x2, "b");
4469 greater_equal(0x3, "nb");
4470 less_equal(0x6, "be");
4471 greater(0x7, "nbe");
4472 overflow(0x0, "o");
4473 no_overflow(0x1, "no");
4474 %}
4475 %}
4477 // Comparison Code for FP conditional move
4478 operand cmpOp_fcmov() %{
4479 match(Bool);
4481 predicate(n->as_Bool()->_test._test != BoolTest::overflow &&
4482 n->as_Bool()->_test._test != BoolTest::no_overflow);
4483 format %{ "" %}
4484 interface(COND_INTER) %{
4485 equal (0x0C8);
4486 not_equal (0x1C8);
4487 less (0x0C0);
4488 greater_equal(0x1C0);
4489 less_equal (0x0D0);
4490 greater (0x1D0);
4491 overflow(0x0, "o"); // not really supported by the instruction
4492 no_overflow(0x1, "no"); // not really supported by the instruction
4493 %}
4494 %}
4496 // Comparison Code used in long compares
4497 operand cmpOp_commute() %{
4498 match(Bool);
4500 format %{ "" %}
4501 interface(COND_INTER) %{
4502 equal(0x4, "e");
4503 not_equal(0x5, "ne");
4504 less(0xF, "g");
4505 greater_equal(0xE, "le");
4506 less_equal(0xD, "ge");
4507 greater(0xC, "l");
4508 overflow(0x0, "o");
4509 no_overflow(0x1, "no");
4510 %}
4511 %}
4513 // Comparison Code used in unsigned long compares
4514 operand cmpOpU_commute() %{
4515 match(Bool);
4517 format %{ "" %}
4518 interface(COND_INTER) %{
4519 equal(0x4, "e");
4520 not_equal(0x5, "ne");
4521 less(0x7, "nbe");
4522 greater_equal(0x6, "be");
4523 less_equal(0x3, "nb");
4524 greater(0x2, "b");
4525 overflow(0x0, "o");
4526 no_overflow(0x1, "no");
4527 %}
4528 %}
4530 //----------OPERAND CLASSES----------------------------------------------------
4531 // Operand Classes are groups of operands that are used as to simplify
4532 // instruction definitions by not requiring the AD writer to specify separate
4533 // instructions for every form of operand when the instruction accepts
4534 // multiple operand types with the same basic encoding and format. The classic
4535 // case of this is memory operands.
4537 opclass memory(direct, indirect, indOffset8, indOffset32, indOffset32X, indIndexOffset,
4538 indIndex, indIndexScale, indIndexScaleOffset);
4540 // Long memory operations are encoded in 2 instructions and a +4 offset.
4541 // This means some kind of offset is always required and you cannot use
4542 // an oop as the offset (done when working on static globals).
4543 opclass long_memory(direct, indirect, indOffset8, indOffset32, indIndexOffset,
4544 indIndex, indIndexScale, indIndexScaleOffset);
4547 //----------PIPELINE-----------------------------------------------------------
4548 // Rules which define the behavior of the target architectures pipeline.
4549 pipeline %{
4551 //----------ATTRIBUTES---------------------------------------------------------
4552 attributes %{
4553 variable_size_instructions; // Fixed size instructions
4554 max_instructions_per_bundle = 3; // Up to 3 instructions per bundle
4555 instruction_unit_size = 1; // An instruction is 1 bytes long
4556 instruction_fetch_unit_size = 16; // The processor fetches one line
4557 instruction_fetch_units = 1; // of 16 bytes
4559 // List of nop instructions
4560 nops( MachNop );
4561 %}
4563 //----------RESOURCES----------------------------------------------------------
4564 // Resources are the functional units available to the machine
4566 // Generic P2/P3 pipeline
4567 // 3 decoders, only D0 handles big operands; a "bundle" is the limit of
4568 // 3 instructions decoded per cycle.
4569 // 2 load/store ops per cycle, 1 branch, 1 FPU,
4570 // 2 ALU op, only ALU0 handles mul/div instructions.
4571 resources( D0, D1, D2, DECODE = D0 | D1 | D2,
4572 MS0, MS1, MEM = MS0 | MS1,
4573 BR, FPU,
4574 ALU0, ALU1, ALU = ALU0 | ALU1 );
4576 //----------PIPELINE DESCRIPTION-----------------------------------------------
4577 // Pipeline Description specifies the stages in the machine's pipeline
4579 // Generic P2/P3 pipeline
4580 pipe_desc(S0, S1, S2, S3, S4, S5);
4582 //----------PIPELINE CLASSES---------------------------------------------------
4583 // Pipeline Classes describe the stages in which input and output are
4584 // referenced by the hardware pipeline.
4586 // Naming convention: ialu or fpu
4587 // Then: _reg
4588 // Then: _reg if there is a 2nd register
4589 // Then: _long if it's a pair of instructions implementing a long
4590 // Then: _fat if it requires the big decoder
4591 // Or: _mem if it requires the big decoder and a memory unit.
4593 // Integer ALU reg operation
4594 pipe_class ialu_reg(rRegI dst) %{
4595 single_instruction;
4596 dst : S4(write);
4597 dst : S3(read);
4598 DECODE : S0; // any decoder
4599 ALU : S3; // any alu
4600 %}
4602 // Long ALU reg operation
4603 pipe_class ialu_reg_long(eRegL dst) %{
4604 instruction_count(2);
4605 dst : S4(write);
4606 dst : S3(read);
4607 DECODE : S0(2); // any 2 decoders
4608 ALU : S3(2); // both alus
4609 %}
4611 // Integer ALU reg operation using big decoder
4612 pipe_class ialu_reg_fat(rRegI dst) %{
4613 single_instruction;
4614 dst : S4(write);
4615 dst : S3(read);
4616 D0 : S0; // big decoder only
4617 ALU : S3; // any alu
4618 %}
4620 // Long ALU reg operation using big decoder
4621 pipe_class ialu_reg_long_fat(eRegL dst) %{
4622 instruction_count(2);
4623 dst : S4(write);
4624 dst : S3(read);
4625 D0 : S0(2); // big decoder only; twice
4626 ALU : S3(2); // any 2 alus
4627 %}
4629 // Integer ALU reg-reg operation
4630 pipe_class ialu_reg_reg(rRegI dst, rRegI src) %{
4631 single_instruction;
4632 dst : S4(write);
4633 src : S3(read);
4634 DECODE : S0; // any decoder
4635 ALU : S3; // any alu
4636 %}
4638 // Long ALU reg-reg operation
4639 pipe_class ialu_reg_reg_long(eRegL dst, eRegL src) %{
4640 instruction_count(2);
4641 dst : S4(write);
4642 src : S3(read);
4643 DECODE : S0(2); // any 2 decoders
4644 ALU : S3(2); // both alus
4645 %}
4647 // Integer ALU reg-reg operation
4648 pipe_class ialu_reg_reg_fat(rRegI dst, memory src) %{
4649 single_instruction;
4650 dst : S4(write);
4651 src : S3(read);
4652 D0 : S0; // big decoder only
4653 ALU : S3; // any alu
4654 %}
4656 // Long ALU reg-reg operation
4657 pipe_class ialu_reg_reg_long_fat(eRegL dst, eRegL src) %{
4658 instruction_count(2);
4659 dst : S4(write);
4660 src : S3(read);
4661 D0 : S0(2); // big decoder only; twice
4662 ALU : S3(2); // both alus
4663 %}
4665 // Integer ALU reg-mem operation
4666 pipe_class ialu_reg_mem(rRegI dst, memory mem) %{
4667 single_instruction;
4668 dst : S5(write);
4669 mem : S3(read);
4670 D0 : S0; // big decoder only
4671 ALU : S4; // any alu
4672 MEM : S3; // any mem
4673 %}
4675 // Long ALU reg-mem operation
4676 pipe_class ialu_reg_long_mem(eRegL dst, load_long_memory mem) %{
4677 instruction_count(2);
4678 dst : S5(write);
4679 mem : S3(read);
4680 D0 : S0(2); // big decoder only; twice
4681 ALU : S4(2); // any 2 alus
4682 MEM : S3(2); // both mems
4683 %}
4685 // Integer mem operation (prefetch)
4686 pipe_class ialu_mem(memory mem)
4687 %{
4688 single_instruction;
4689 mem : S3(read);
4690 D0 : S0; // big decoder only
4691 MEM : S3; // any mem
4692 %}
4694 // Integer Store to Memory
4695 pipe_class ialu_mem_reg(memory mem, rRegI src) %{
4696 single_instruction;
4697 mem : S3(read);
4698 src : S5(read);
4699 D0 : S0; // big decoder only
4700 ALU : S4; // any alu
4701 MEM : S3;
4702 %}
4704 // Long Store to Memory
4705 pipe_class ialu_mem_long_reg(memory mem, eRegL src) %{
4706 instruction_count(2);
4707 mem : S3(read);
4708 src : S5(read);
4709 D0 : S0(2); // big decoder only; twice
4710 ALU : S4(2); // any 2 alus
4711 MEM : S3(2); // Both mems
4712 %}
4714 // Integer Store to Memory
4715 pipe_class ialu_mem_imm(memory mem) %{
4716 single_instruction;
4717 mem : S3(read);
4718 D0 : S0; // big decoder only
4719 ALU : S4; // any alu
4720 MEM : S3;
4721 %}
4723 // Integer ALU0 reg-reg operation
4724 pipe_class ialu_reg_reg_alu0(rRegI dst, rRegI src) %{
4725 single_instruction;
4726 dst : S4(write);
4727 src : S3(read);
4728 D0 : S0; // Big decoder only
4729 ALU0 : S3; // only alu0
4730 %}
4732 // Integer ALU0 reg-mem operation
4733 pipe_class ialu_reg_mem_alu0(rRegI dst, memory mem) %{
4734 single_instruction;
4735 dst : S5(write);
4736 mem : S3(read);
4737 D0 : S0; // big decoder only
4738 ALU0 : S4; // ALU0 only
4739 MEM : S3; // any mem
4740 %}
4742 // Integer ALU reg-reg operation
4743 pipe_class ialu_cr_reg_reg(eFlagsReg cr, rRegI src1, rRegI src2) %{
4744 single_instruction;
4745 cr : S4(write);
4746 src1 : S3(read);
4747 src2 : S3(read);
4748 DECODE : S0; // any decoder
4749 ALU : S3; // any alu
4750 %}
4752 // Integer ALU reg-imm operation
4753 pipe_class ialu_cr_reg_imm(eFlagsReg cr, rRegI src1) %{
4754 single_instruction;
4755 cr : S4(write);
4756 src1 : S3(read);
4757 DECODE : S0; // any decoder
4758 ALU : S3; // any alu
4759 %}
4761 // Integer ALU reg-mem operation
4762 pipe_class ialu_cr_reg_mem(eFlagsReg cr, rRegI src1, memory src2) %{
4763 single_instruction;
4764 cr : S4(write);
4765 src1 : S3(read);
4766 src2 : S3(read);
4767 D0 : S0; // big decoder only
4768 ALU : S4; // any alu
4769 MEM : S3;
4770 %}
4772 // Conditional move reg-reg
4773 pipe_class pipe_cmplt( rRegI p, rRegI q, rRegI y ) %{
4774 instruction_count(4);
4775 y : S4(read);
4776 q : S3(read);
4777 p : S3(read);
4778 DECODE : S0(4); // any decoder
4779 %}
4781 // Conditional move reg-reg
4782 pipe_class pipe_cmov_reg( rRegI dst, rRegI src, eFlagsReg cr ) %{
4783 single_instruction;
4784 dst : S4(write);
4785 src : S3(read);
4786 cr : S3(read);
4787 DECODE : S0; // any decoder
4788 %}
4790 // Conditional move reg-mem
4791 pipe_class pipe_cmov_mem( eFlagsReg cr, rRegI dst, memory src) %{
4792 single_instruction;
4793 dst : S4(write);
4794 src : S3(read);
4795 cr : S3(read);
4796 DECODE : S0; // any decoder
4797 MEM : S3;
4798 %}
4800 // Conditional move reg-reg long
4801 pipe_class pipe_cmov_reg_long( eFlagsReg cr, eRegL dst, eRegL src) %{
4802 single_instruction;
4803 dst : S4(write);
4804 src : S3(read);
4805 cr : S3(read);
4806 DECODE : S0(2); // any 2 decoders
4807 %}
4809 // Conditional move double reg-reg
4810 pipe_class pipe_cmovDPR_reg( eFlagsReg cr, regDPR1 dst, regDPR src) %{
4811 single_instruction;
4812 dst : S4(write);
4813 src : S3(read);
4814 cr : S3(read);
4815 DECODE : S0; // any decoder
4816 %}
4818 // Float reg-reg operation
4819 pipe_class fpu_reg(regDPR dst) %{
4820 instruction_count(2);
4821 dst : S3(read);
4822 DECODE : S0(2); // any 2 decoders
4823 FPU : S3;
4824 %}
4826 // Float reg-reg operation
4827 pipe_class fpu_reg_reg(regDPR dst, regDPR src) %{
4828 instruction_count(2);
4829 dst : S4(write);
4830 src : S3(read);
4831 DECODE : S0(2); // any 2 decoders
4832 FPU : S3;
4833 %}
4835 // Float reg-reg operation
4836 pipe_class fpu_reg_reg_reg(regDPR dst, regDPR src1, regDPR src2) %{
4837 instruction_count(3);
4838 dst : S4(write);
4839 src1 : S3(read);
4840 src2 : S3(read);
4841 DECODE : S0(3); // any 3 decoders
4842 FPU : S3(2);
4843 %}
4845 // Float reg-reg operation
4846 pipe_class fpu_reg_reg_reg_reg(regDPR dst, regDPR src1, regDPR src2, regDPR src3) %{
4847 instruction_count(4);
4848 dst : S4(write);
4849 src1 : S3(read);
4850 src2 : S3(read);
4851 src3 : S3(read);
4852 DECODE : S0(4); // any 3 decoders
4853 FPU : S3(2);
4854 %}
4856 // Float reg-reg operation
4857 pipe_class fpu_reg_mem_reg_reg(regDPR dst, memory src1, regDPR src2, regDPR src3) %{
4858 instruction_count(4);
4859 dst : S4(write);
4860 src1 : S3(read);
4861 src2 : S3(read);
4862 src3 : S3(read);
4863 DECODE : S1(3); // any 3 decoders
4864 D0 : S0; // Big decoder only
4865 FPU : S3(2);
4866 MEM : S3;
4867 %}
4869 // Float reg-mem operation
4870 pipe_class fpu_reg_mem(regDPR dst, memory mem) %{
4871 instruction_count(2);
4872 dst : S5(write);
4873 mem : S3(read);
4874 D0 : S0; // big decoder only
4875 DECODE : S1; // any decoder for FPU POP
4876 FPU : S4;
4877 MEM : S3; // any mem
4878 %}
4880 // Float reg-mem operation
4881 pipe_class fpu_reg_reg_mem(regDPR dst, regDPR src1, memory mem) %{
4882 instruction_count(3);
4883 dst : S5(write);
4884 src1 : S3(read);
4885 mem : S3(read);
4886 D0 : S0; // big decoder only
4887 DECODE : S1(2); // any decoder for FPU POP
4888 FPU : S4;
4889 MEM : S3; // any mem
4890 %}
4892 // Float mem-reg operation
4893 pipe_class fpu_mem_reg(memory mem, regDPR src) %{
4894 instruction_count(2);
4895 src : S5(read);
4896 mem : S3(read);
4897 DECODE : S0; // any decoder for FPU PUSH
4898 D0 : S1; // big decoder only
4899 FPU : S4;
4900 MEM : S3; // any mem
4901 %}
4903 pipe_class fpu_mem_reg_reg(memory mem, regDPR src1, regDPR src2) %{
4904 instruction_count(3);
4905 src1 : S3(read);
4906 src2 : S3(read);
4907 mem : S3(read);
4908 DECODE : S0(2); // any decoder for FPU PUSH
4909 D0 : S1; // big decoder only
4910 FPU : S4;
4911 MEM : S3; // any mem
4912 %}
4914 pipe_class fpu_mem_reg_mem(memory mem, regDPR src1, memory src2) %{
4915 instruction_count(3);
4916 src1 : S3(read);
4917 src2 : S3(read);
4918 mem : S4(read);
4919 DECODE : S0; // any decoder for FPU PUSH
4920 D0 : S0(2); // big decoder only
4921 FPU : S4;
4922 MEM : S3(2); // any mem
4923 %}
4925 pipe_class fpu_mem_mem(memory dst, memory src1) %{
4926 instruction_count(2);
4927 src1 : S3(read);
4928 dst : S4(read);
4929 D0 : S0(2); // big decoder only
4930 MEM : S3(2); // any mem
4931 %}
4933 pipe_class fpu_mem_mem_mem(memory dst, memory src1, memory src2) %{
4934 instruction_count(3);
4935 src1 : S3(read);
4936 src2 : S3(read);
4937 dst : S4(read);
4938 D0 : S0(3); // big decoder only
4939 FPU : S4;
4940 MEM : S3(3); // any mem
4941 %}
4943 pipe_class fpu_mem_reg_con(memory mem, regDPR src1) %{
4944 instruction_count(3);
4945 src1 : S4(read);
4946 mem : S4(read);
4947 DECODE : S0; // any decoder for FPU PUSH
4948 D0 : S0(2); // big decoder only
4949 FPU : S4;
4950 MEM : S3(2); // any mem
4951 %}
4953 // Float load constant
4954 pipe_class fpu_reg_con(regDPR dst) %{
4955 instruction_count(2);
4956 dst : S5(write);
4957 D0 : S0; // big decoder only for the load
4958 DECODE : S1; // any decoder for FPU POP
4959 FPU : S4;
4960 MEM : S3; // any mem
4961 %}
4963 // Float load constant
4964 pipe_class fpu_reg_reg_con(regDPR dst, regDPR src) %{
4965 instruction_count(3);
4966 dst : S5(write);
4967 src : S3(read);
4968 D0 : S0; // big decoder only for the load
4969 DECODE : S1(2); // any decoder for FPU POP
4970 FPU : S4;
4971 MEM : S3; // any mem
4972 %}
4974 // UnConditional branch
4975 pipe_class pipe_jmp( label labl ) %{
4976 single_instruction;
4977 BR : S3;
4978 %}
4980 // Conditional branch
4981 pipe_class pipe_jcc( cmpOp cmp, eFlagsReg cr, label labl ) %{
4982 single_instruction;
4983 cr : S1(read);
4984 BR : S3;
4985 %}
4987 // Allocation idiom
4988 pipe_class pipe_cmpxchg( eRegP dst, eRegP heap_ptr ) %{
4989 instruction_count(1); force_serialization;
4990 fixed_latency(6);
4991 heap_ptr : S3(read);
4992 DECODE : S0(3);
4993 D0 : S2;
4994 MEM : S3;
4995 ALU : S3(2);
4996 dst : S5(write);
4997 BR : S5;
4998 %}
5000 // Generic big/slow expanded idiom
5001 pipe_class pipe_slow( ) %{
5002 instruction_count(10); multiple_bundles; force_serialization;
5003 fixed_latency(100);
5004 D0 : S0(2);
5005 MEM : S3(2);
5006 %}
5008 // The real do-nothing guy
5009 pipe_class empty( ) %{
5010 instruction_count(0);
5011 %}
5013 // Define the class for the Nop node
5014 define %{
5015 MachNop = empty;
5016 %}
5018 %}
5020 //----------INSTRUCTIONS-------------------------------------------------------
5021 //
5022 // match -- States which machine-independent subtree may be replaced
5023 // by this instruction.
5024 // ins_cost -- The estimated cost of this instruction is used by instruction
5025 // selection to identify a minimum cost tree of machine
5026 // instructions that matches a tree of machine-independent
5027 // instructions.
5028 // format -- A string providing the disassembly for this instruction.
5029 // The value of an instruction's operand may be inserted
5030 // by referring to it with a '$' prefix.
5031 // opcode -- Three instruction opcodes may be provided. These are referred
5032 // to within an encode class as $primary, $secondary, and $tertiary
5033 // respectively. The primary opcode is commonly used to
5034 // indicate the type of machine instruction, while secondary
5035 // and tertiary are often used for prefix options or addressing
5036 // modes.
5037 // ins_encode -- A list of encode classes with parameters. The encode class
5038 // name must have been defined in an 'enc_class' specification
5039 // in the encode section of the architecture description.
5041 //----------BSWAP-Instruction--------------------------------------------------
5042 instruct bytes_reverse_int(rRegI dst) %{
5043 match(Set dst (ReverseBytesI dst));
5045 format %{ "BSWAP $dst" %}
5046 opcode(0x0F, 0xC8);
5047 ins_encode( OpcP, OpcSReg(dst) );
5048 ins_pipe( ialu_reg );
5049 %}
5051 instruct bytes_reverse_long(eRegL dst) %{
5052 match(Set dst (ReverseBytesL dst));
5054 format %{ "BSWAP $dst.lo\n\t"
5055 "BSWAP $dst.hi\n\t"
5056 "XCHG $dst.lo $dst.hi" %}
5058 ins_cost(125);
5059 ins_encode( bswap_long_bytes(dst) );
5060 ins_pipe( ialu_reg_reg);
5061 %}
5063 instruct bytes_reverse_unsigned_short(rRegI dst, eFlagsReg cr) %{
5064 match(Set dst (ReverseBytesUS dst));
5065 effect(KILL cr);
5067 format %{ "BSWAP $dst\n\t"
5068 "SHR $dst,16\n\t" %}
5069 ins_encode %{
5070 __ bswapl($dst$$Register);
5071 __ shrl($dst$$Register, 16);
5072 %}
5073 ins_pipe( ialu_reg );
5074 %}
5076 instruct bytes_reverse_short(rRegI dst, eFlagsReg cr) %{
5077 match(Set dst (ReverseBytesS dst));
5078 effect(KILL cr);
5080 format %{ "BSWAP $dst\n\t"
5081 "SAR $dst,16\n\t" %}
5082 ins_encode %{
5083 __ bswapl($dst$$Register);
5084 __ sarl($dst$$Register, 16);
5085 %}
5086 ins_pipe( ialu_reg );
5087 %}
5090 //---------- Zeros Count Instructions ------------------------------------------
5092 instruct countLeadingZerosI(rRegI dst, rRegI src, eFlagsReg cr) %{
5093 predicate(UseCountLeadingZerosInstruction);
5094 match(Set dst (CountLeadingZerosI src));
5095 effect(KILL cr);
5097 format %{ "LZCNT $dst, $src\t# count leading zeros (int)" %}
5098 ins_encode %{
5099 __ lzcntl($dst$$Register, $src$$Register);
5100 %}
5101 ins_pipe(ialu_reg);
5102 %}
5104 instruct countLeadingZerosI_bsr(rRegI dst, rRegI src, eFlagsReg cr) %{
5105 predicate(!UseCountLeadingZerosInstruction);
5106 match(Set dst (CountLeadingZerosI src));
5107 effect(KILL cr);
5109 format %{ "BSR $dst, $src\t# count leading zeros (int)\n\t"
5110 "JNZ skip\n\t"
5111 "MOV $dst, -1\n"
5112 "skip:\n\t"
5113 "NEG $dst\n\t"
5114 "ADD $dst, 31" %}
5115 ins_encode %{
5116 Register Rdst = $dst$$Register;
5117 Register Rsrc = $src$$Register;
5118 Label skip;
5119 __ bsrl(Rdst, Rsrc);
5120 __ jccb(Assembler::notZero, skip);
5121 __ movl(Rdst, -1);
5122 __ bind(skip);
5123 __ negl(Rdst);
5124 __ addl(Rdst, BitsPerInt - 1);
5125 %}
5126 ins_pipe(ialu_reg);
5127 %}
5129 instruct countLeadingZerosL(rRegI dst, eRegL src, eFlagsReg cr) %{
5130 predicate(UseCountLeadingZerosInstruction);
5131 match(Set dst (CountLeadingZerosL src));
5132 effect(TEMP dst, KILL cr);
5134 format %{ "LZCNT $dst, $src.hi\t# count leading zeros (long)\n\t"
5135 "JNC done\n\t"
5136 "LZCNT $dst, $src.lo\n\t"
5137 "ADD $dst, 32\n"
5138 "done:" %}
5139 ins_encode %{
5140 Register Rdst = $dst$$Register;
5141 Register Rsrc = $src$$Register;
5142 Label done;
5143 __ lzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
5144 __ jccb(Assembler::carryClear, done);
5145 __ lzcntl(Rdst, Rsrc);
5146 __ addl(Rdst, BitsPerInt);
5147 __ bind(done);
5148 %}
5149 ins_pipe(ialu_reg);
5150 %}
5152 instruct countLeadingZerosL_bsr(rRegI dst, eRegL src, eFlagsReg cr) %{
5153 predicate(!UseCountLeadingZerosInstruction);
5154 match(Set dst (CountLeadingZerosL src));
5155 effect(TEMP dst, KILL cr);
5157 format %{ "BSR $dst, $src.hi\t# count leading zeros (long)\n\t"
5158 "JZ msw_is_zero\n\t"
5159 "ADD $dst, 32\n\t"
5160 "JMP not_zero\n"
5161 "msw_is_zero:\n\t"
5162 "BSR $dst, $src.lo\n\t"
5163 "JNZ not_zero\n\t"
5164 "MOV $dst, -1\n"
5165 "not_zero:\n\t"
5166 "NEG $dst\n\t"
5167 "ADD $dst, 63\n" %}
5168 ins_encode %{
5169 Register Rdst = $dst$$Register;
5170 Register Rsrc = $src$$Register;
5171 Label msw_is_zero;
5172 Label not_zero;
5173 __ bsrl(Rdst, HIGH_FROM_LOW(Rsrc));
5174 __ jccb(Assembler::zero, msw_is_zero);
5175 __ addl(Rdst, BitsPerInt);
5176 __ jmpb(not_zero);
5177 __ bind(msw_is_zero);
5178 __ bsrl(Rdst, Rsrc);
5179 __ jccb(Assembler::notZero, not_zero);
5180 __ movl(Rdst, -1);
5181 __ bind(not_zero);
5182 __ negl(Rdst);
5183 __ addl(Rdst, BitsPerLong - 1);
5184 %}
5185 ins_pipe(ialu_reg);
5186 %}
5188 instruct countTrailingZerosI(rRegI dst, rRegI src, eFlagsReg cr) %{
5189 predicate(UseCountTrailingZerosInstruction);
5190 match(Set dst (CountTrailingZerosI src));
5191 effect(KILL cr);
5193 format %{ "TZCNT $dst, $src\t# count trailing zeros (int)" %}
5194 ins_encode %{
5195 __ tzcntl($dst$$Register, $src$$Register);
5196 %}
5197 ins_pipe(ialu_reg);
5198 %}
5200 instruct countTrailingZerosI_bsf(rRegI dst, rRegI src, eFlagsReg cr) %{
5201 predicate(!UseCountTrailingZerosInstruction);
5202 match(Set dst (CountTrailingZerosI src));
5203 effect(KILL cr);
5205 format %{ "BSF $dst, $src\t# count trailing zeros (int)\n\t"
5206 "JNZ done\n\t"
5207 "MOV $dst, 32\n"
5208 "done:" %}
5209 ins_encode %{
5210 Register Rdst = $dst$$Register;
5211 Label done;
5212 __ bsfl(Rdst, $src$$Register);
5213 __ jccb(Assembler::notZero, done);
5214 __ movl(Rdst, BitsPerInt);
5215 __ bind(done);
5216 %}
5217 ins_pipe(ialu_reg);
5218 %}
5220 instruct countTrailingZerosL(rRegI dst, eRegL src, eFlagsReg cr) %{
5221 predicate(UseCountTrailingZerosInstruction);
5222 match(Set dst (CountTrailingZerosL src));
5223 effect(TEMP dst, KILL cr);
5225 format %{ "TZCNT $dst, $src.lo\t# count trailing zeros (long) \n\t"
5226 "JNC done\n\t"
5227 "TZCNT $dst, $src.hi\n\t"
5228 "ADD $dst, 32\n"
5229 "done:" %}
5230 ins_encode %{
5231 Register Rdst = $dst$$Register;
5232 Register Rsrc = $src$$Register;
5233 Label done;
5234 __ tzcntl(Rdst, Rsrc);
5235 __ jccb(Assembler::carryClear, done);
5236 __ tzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
5237 __ addl(Rdst, BitsPerInt);
5238 __ bind(done);
5239 %}
5240 ins_pipe(ialu_reg);
5241 %}
5243 instruct countTrailingZerosL_bsf(rRegI dst, eRegL src, eFlagsReg cr) %{
5244 predicate(!UseCountTrailingZerosInstruction);
5245 match(Set dst (CountTrailingZerosL src));
5246 effect(TEMP dst, KILL cr);
5248 format %{ "BSF $dst, $src.lo\t# count trailing zeros (long)\n\t"
5249 "JNZ done\n\t"
5250 "BSF $dst, $src.hi\n\t"
5251 "JNZ msw_not_zero\n\t"
5252 "MOV $dst, 32\n"
5253 "msw_not_zero:\n\t"
5254 "ADD $dst, 32\n"
5255 "done:" %}
5256 ins_encode %{
5257 Register Rdst = $dst$$Register;
5258 Register Rsrc = $src$$Register;
5259 Label msw_not_zero;
5260 Label done;
5261 __ bsfl(Rdst, Rsrc);
5262 __ jccb(Assembler::notZero, done);
5263 __ bsfl(Rdst, HIGH_FROM_LOW(Rsrc));
5264 __ jccb(Assembler::notZero, msw_not_zero);
5265 __ movl(Rdst, BitsPerInt);
5266 __ bind(msw_not_zero);
5267 __ addl(Rdst, BitsPerInt);
5268 __ bind(done);
5269 %}
5270 ins_pipe(ialu_reg);
5271 %}
5274 //---------- Population Count Instructions -------------------------------------
5276 instruct popCountI(rRegI dst, rRegI src, eFlagsReg cr) %{
5277 predicate(UsePopCountInstruction);
5278 match(Set dst (PopCountI src));
5279 effect(KILL cr);
5281 format %{ "POPCNT $dst, $src" %}
5282 ins_encode %{
5283 __ popcntl($dst$$Register, $src$$Register);
5284 %}
5285 ins_pipe(ialu_reg);
5286 %}
5288 instruct popCountI_mem(rRegI dst, memory mem, eFlagsReg cr) %{
5289 predicate(UsePopCountInstruction);
5290 match(Set dst (PopCountI (LoadI mem)));
5291 effect(KILL cr);
5293 format %{ "POPCNT $dst, $mem" %}
5294 ins_encode %{
5295 __ popcntl($dst$$Register, $mem$$Address);
5296 %}
5297 ins_pipe(ialu_reg);
5298 %}
5300 // Note: Long.bitCount(long) returns an int.
5301 instruct popCountL(rRegI dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
5302 predicate(UsePopCountInstruction);
5303 match(Set dst (PopCountL src));
5304 effect(KILL cr, TEMP tmp, TEMP dst);
5306 format %{ "POPCNT $dst, $src.lo\n\t"
5307 "POPCNT $tmp, $src.hi\n\t"
5308 "ADD $dst, $tmp" %}
5309 ins_encode %{
5310 __ popcntl($dst$$Register, $src$$Register);
5311 __ popcntl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
5312 __ addl($dst$$Register, $tmp$$Register);
5313 %}
5314 ins_pipe(ialu_reg);
5315 %}
5317 // Note: Long.bitCount(long) returns an int.
5318 instruct popCountL_mem(rRegI dst, memory mem, rRegI tmp, eFlagsReg cr) %{
5319 predicate(UsePopCountInstruction);
5320 match(Set dst (PopCountL (LoadL mem)));
5321 effect(KILL cr, TEMP tmp, TEMP dst);
5323 format %{ "POPCNT $dst, $mem\n\t"
5324 "POPCNT $tmp, $mem+4\n\t"
5325 "ADD $dst, $tmp" %}
5326 ins_encode %{
5327 //__ popcntl($dst$$Register, $mem$$Address$$first);
5328 //__ popcntl($tmp$$Register, $mem$$Address$$second);
5329 __ popcntl($dst$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, relocInfo::none));
5330 __ popcntl($tmp$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, relocInfo::none));
5331 __ addl($dst$$Register, $tmp$$Register);
5332 %}
5333 ins_pipe(ialu_reg);
5334 %}
5337 //----------Load/Store/Move Instructions---------------------------------------
5338 //----------Load Instructions--------------------------------------------------
5339 // Load Byte (8bit signed)
5340 instruct loadB(xRegI dst, memory mem) %{
5341 match(Set dst (LoadB mem));
5343 ins_cost(125);
5344 format %{ "MOVSX8 $dst,$mem\t# byte" %}
5346 ins_encode %{
5347 __ movsbl($dst$$Register, $mem$$Address);
5348 %}
5350 ins_pipe(ialu_reg_mem);
5351 %}
5353 // Load Byte (8bit signed) into Long Register
5354 instruct loadB2L(eRegL dst, memory mem, eFlagsReg cr) %{
5355 match(Set dst (ConvI2L (LoadB mem)));
5356 effect(KILL cr);
5358 ins_cost(375);
5359 format %{ "MOVSX8 $dst.lo,$mem\t# byte -> long\n\t"
5360 "MOV $dst.hi,$dst.lo\n\t"
5361 "SAR $dst.hi,7" %}
5363 ins_encode %{
5364 __ movsbl($dst$$Register, $mem$$Address);
5365 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
5366 __ sarl(HIGH_FROM_LOW($dst$$Register), 7); // 24+1 MSB are already signed extended.
5367 %}
5369 ins_pipe(ialu_reg_mem);
5370 %}
5372 // Load Unsigned Byte (8bit UNsigned)
5373 instruct loadUB(xRegI dst, memory mem) %{
5374 match(Set dst (LoadUB mem));
5376 ins_cost(125);
5377 format %{ "MOVZX8 $dst,$mem\t# ubyte -> int" %}
5379 ins_encode %{
5380 __ movzbl($dst$$Register, $mem$$Address);
5381 %}
5383 ins_pipe(ialu_reg_mem);
5384 %}
5386 // Load Unsigned Byte (8 bit UNsigned) into Long Register
5387 instruct loadUB2L(eRegL dst, memory mem, eFlagsReg cr) %{
5388 match(Set dst (ConvI2L (LoadUB mem)));
5389 effect(KILL cr);
5391 ins_cost(250);
5392 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte -> long\n\t"
5393 "XOR $dst.hi,$dst.hi" %}
5395 ins_encode %{
5396 Register Rdst = $dst$$Register;
5397 __ movzbl(Rdst, $mem$$Address);
5398 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5399 %}
5401 ins_pipe(ialu_reg_mem);
5402 %}
5404 // Load Unsigned Byte (8 bit UNsigned) with mask into Long Register
5405 instruct loadUB2L_immI8(eRegL dst, memory mem, immI8 mask, eFlagsReg cr) %{
5406 match(Set dst (ConvI2L (AndI (LoadUB mem) mask)));
5407 effect(KILL cr);
5409 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte & 8-bit mask -> long\n\t"
5410 "XOR $dst.hi,$dst.hi\n\t"
5411 "AND $dst.lo,$mask" %}
5412 ins_encode %{
5413 Register Rdst = $dst$$Register;
5414 __ movzbl(Rdst, $mem$$Address);
5415 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5416 __ andl(Rdst, $mask$$constant);
5417 %}
5418 ins_pipe(ialu_reg_mem);
5419 %}
5421 // Load Short (16bit signed)
5422 instruct loadS(rRegI dst, memory mem) %{
5423 match(Set dst (LoadS mem));
5425 ins_cost(125);
5426 format %{ "MOVSX $dst,$mem\t# short" %}
5428 ins_encode %{
5429 __ movswl($dst$$Register, $mem$$Address);
5430 %}
5432 ins_pipe(ialu_reg_mem);
5433 %}
5435 // Load Short (16 bit signed) to Byte (8 bit signed)
5436 instruct loadS2B(rRegI dst, memory mem, immI_24 twentyfour) %{
5437 match(Set dst (RShiftI (LShiftI (LoadS mem) twentyfour) twentyfour));
5439 ins_cost(125);
5440 format %{ "MOVSX $dst, $mem\t# short -> byte" %}
5441 ins_encode %{
5442 __ movsbl($dst$$Register, $mem$$Address);
5443 %}
5444 ins_pipe(ialu_reg_mem);
5445 %}
5447 // Load Short (16bit signed) into Long Register
5448 instruct loadS2L(eRegL dst, memory mem, eFlagsReg cr) %{
5449 match(Set dst (ConvI2L (LoadS mem)));
5450 effect(KILL cr);
5452 ins_cost(375);
5453 format %{ "MOVSX $dst.lo,$mem\t# short -> long\n\t"
5454 "MOV $dst.hi,$dst.lo\n\t"
5455 "SAR $dst.hi,15" %}
5457 ins_encode %{
5458 __ movswl($dst$$Register, $mem$$Address);
5459 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
5460 __ sarl(HIGH_FROM_LOW($dst$$Register), 15); // 16+1 MSB are already signed extended.
5461 %}
5463 ins_pipe(ialu_reg_mem);
5464 %}
5466 // Load Unsigned Short/Char (16bit unsigned)
5467 instruct loadUS(rRegI dst, memory mem) %{
5468 match(Set dst (LoadUS mem));
5470 ins_cost(125);
5471 format %{ "MOVZX $dst,$mem\t# ushort/char -> int" %}
5473 ins_encode %{
5474 __ movzwl($dst$$Register, $mem$$Address);
5475 %}
5477 ins_pipe(ialu_reg_mem);
5478 %}
5480 // Load Unsigned Short/Char (16 bit UNsigned) to Byte (8 bit signed)
5481 instruct loadUS2B(rRegI dst, memory mem, immI_24 twentyfour) %{
5482 match(Set dst (RShiftI (LShiftI (LoadUS mem) twentyfour) twentyfour));
5484 ins_cost(125);
5485 format %{ "MOVSX $dst, $mem\t# ushort -> byte" %}
5486 ins_encode %{
5487 __ movsbl($dst$$Register, $mem$$Address);
5488 %}
5489 ins_pipe(ialu_reg_mem);
5490 %}
5492 // Load Unsigned Short/Char (16 bit UNsigned) into Long Register
5493 instruct loadUS2L(eRegL dst, memory mem, eFlagsReg cr) %{
5494 match(Set dst (ConvI2L (LoadUS mem)));
5495 effect(KILL cr);
5497 ins_cost(250);
5498 format %{ "MOVZX $dst.lo,$mem\t# ushort/char -> long\n\t"
5499 "XOR $dst.hi,$dst.hi" %}
5501 ins_encode %{
5502 __ movzwl($dst$$Register, $mem$$Address);
5503 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
5504 %}
5506 ins_pipe(ialu_reg_mem);
5507 %}
5509 // Load Unsigned Short/Char (16 bit UNsigned) with mask 0xFF into Long Register
5510 instruct loadUS2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
5511 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
5512 effect(KILL cr);
5514 format %{ "MOVZX8 $dst.lo,$mem\t# ushort/char & 0xFF -> long\n\t"
5515 "XOR $dst.hi,$dst.hi" %}
5516 ins_encode %{
5517 Register Rdst = $dst$$Register;
5518 __ movzbl(Rdst, $mem$$Address);
5519 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5520 %}
5521 ins_pipe(ialu_reg_mem);
5522 %}
5524 // Load Unsigned Short/Char (16 bit UNsigned) with a 16-bit mask into Long Register
5525 instruct loadUS2L_immI16(eRegL dst, memory mem, immI16 mask, eFlagsReg cr) %{
5526 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
5527 effect(KILL cr);
5529 format %{ "MOVZX $dst.lo, $mem\t# ushort/char & 16-bit mask -> long\n\t"
5530 "XOR $dst.hi,$dst.hi\n\t"
5531 "AND $dst.lo,$mask" %}
5532 ins_encode %{
5533 Register Rdst = $dst$$Register;
5534 __ movzwl(Rdst, $mem$$Address);
5535 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5536 __ andl(Rdst, $mask$$constant);
5537 %}
5538 ins_pipe(ialu_reg_mem);
5539 %}
5541 // Load Integer
5542 instruct loadI(rRegI dst, memory mem) %{
5543 match(Set dst (LoadI mem));
5545 ins_cost(125);
5546 format %{ "MOV $dst,$mem\t# int" %}
5548 ins_encode %{
5549 __ movl($dst$$Register, $mem$$Address);
5550 %}
5552 ins_pipe(ialu_reg_mem);
5553 %}
5555 // Load Integer (32 bit signed) to Byte (8 bit signed)
5556 instruct loadI2B(rRegI dst, memory mem, immI_24 twentyfour) %{
5557 match(Set dst (RShiftI (LShiftI (LoadI mem) twentyfour) twentyfour));
5559 ins_cost(125);
5560 format %{ "MOVSX $dst, $mem\t# int -> byte" %}
5561 ins_encode %{
5562 __ movsbl($dst$$Register, $mem$$Address);
5563 %}
5564 ins_pipe(ialu_reg_mem);
5565 %}
5567 // Load Integer (32 bit signed) to Unsigned Byte (8 bit UNsigned)
5568 instruct loadI2UB(rRegI dst, memory mem, immI_255 mask) %{
5569 match(Set dst (AndI (LoadI mem) mask));
5571 ins_cost(125);
5572 format %{ "MOVZX $dst, $mem\t# int -> ubyte" %}
5573 ins_encode %{
5574 __ movzbl($dst$$Register, $mem$$Address);
5575 %}
5576 ins_pipe(ialu_reg_mem);
5577 %}
5579 // Load Integer (32 bit signed) to Short (16 bit signed)
5580 instruct loadI2S(rRegI dst, memory mem, immI_16 sixteen) %{
5581 match(Set dst (RShiftI (LShiftI (LoadI mem) sixteen) sixteen));
5583 ins_cost(125);
5584 format %{ "MOVSX $dst, $mem\t# int -> short" %}
5585 ins_encode %{
5586 __ movswl($dst$$Register, $mem$$Address);
5587 %}
5588 ins_pipe(ialu_reg_mem);
5589 %}
5591 // Load Integer (32 bit signed) to Unsigned Short/Char (16 bit UNsigned)
5592 instruct loadI2US(rRegI dst, memory mem, immI_65535 mask) %{
5593 match(Set dst (AndI (LoadI mem) mask));
5595 ins_cost(125);
5596 format %{ "MOVZX $dst, $mem\t# int -> ushort/char" %}
5597 ins_encode %{
5598 __ movzwl($dst$$Register, $mem$$Address);
5599 %}
5600 ins_pipe(ialu_reg_mem);
5601 %}
5603 // Load Integer into Long Register
5604 instruct loadI2L(eRegL dst, memory mem, eFlagsReg cr) %{
5605 match(Set dst (ConvI2L (LoadI mem)));
5606 effect(KILL cr);
5608 ins_cost(375);
5609 format %{ "MOV $dst.lo,$mem\t# int -> long\n\t"
5610 "MOV $dst.hi,$dst.lo\n\t"
5611 "SAR $dst.hi,31" %}
5613 ins_encode %{
5614 __ movl($dst$$Register, $mem$$Address);
5615 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
5616 __ sarl(HIGH_FROM_LOW($dst$$Register), 31);
5617 %}
5619 ins_pipe(ialu_reg_mem);
5620 %}
5622 // Load Integer with mask 0xFF into Long Register
5623 instruct loadI2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
5624 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
5625 effect(KILL cr);
5627 format %{ "MOVZX8 $dst.lo,$mem\t# int & 0xFF -> long\n\t"
5628 "XOR $dst.hi,$dst.hi" %}
5629 ins_encode %{
5630 Register Rdst = $dst$$Register;
5631 __ movzbl(Rdst, $mem$$Address);
5632 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5633 %}
5634 ins_pipe(ialu_reg_mem);
5635 %}
5637 // Load Integer with mask 0xFFFF into Long Register
5638 instruct loadI2L_immI_65535(eRegL dst, memory mem, immI_65535 mask, eFlagsReg cr) %{
5639 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
5640 effect(KILL cr);
5642 format %{ "MOVZX $dst.lo,$mem\t# int & 0xFFFF -> long\n\t"
5643 "XOR $dst.hi,$dst.hi" %}
5644 ins_encode %{
5645 Register Rdst = $dst$$Register;
5646 __ movzwl(Rdst, $mem$$Address);
5647 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5648 %}
5649 ins_pipe(ialu_reg_mem);
5650 %}
5652 // Load Integer with 31-bit mask into Long Register
5653 instruct loadI2L_immU31(eRegL dst, memory mem, immU31 mask, eFlagsReg cr) %{
5654 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
5655 effect(KILL cr);
5657 format %{ "MOV $dst.lo,$mem\t# int & 31-bit mask -> long\n\t"
5658 "XOR $dst.hi,$dst.hi\n\t"
5659 "AND $dst.lo,$mask" %}
5660 ins_encode %{
5661 Register Rdst = $dst$$Register;
5662 __ movl(Rdst, $mem$$Address);
5663 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
5664 __ andl(Rdst, $mask$$constant);
5665 %}
5666 ins_pipe(ialu_reg_mem);
5667 %}
5669 // Load Unsigned Integer into Long Register
5670 instruct loadUI2L(eRegL dst, memory mem, immL_32bits mask, eFlagsReg cr) %{
5671 match(Set dst (AndL (ConvI2L (LoadI mem)) mask));
5672 effect(KILL cr);
5674 ins_cost(250);
5675 format %{ "MOV $dst.lo,$mem\t# uint -> long\n\t"
5676 "XOR $dst.hi,$dst.hi" %}
5678 ins_encode %{
5679 __ movl($dst$$Register, $mem$$Address);
5680 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
5681 %}
5683 ins_pipe(ialu_reg_mem);
5684 %}
5686 // Load Long. Cannot clobber address while loading, so restrict address
5687 // register to ESI
5688 instruct loadL(eRegL dst, load_long_memory mem) %{
5689 predicate(!((LoadLNode*)n)->require_atomic_access());
5690 match(Set dst (LoadL mem));
5692 ins_cost(250);
5693 format %{ "MOV $dst.lo,$mem\t# long\n\t"
5694 "MOV $dst.hi,$mem+4" %}
5696 ins_encode %{
5697 Address Amemlo = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, relocInfo::none);
5698 Address Amemhi = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, relocInfo::none);
5699 __ movl($dst$$Register, Amemlo);
5700 __ movl(HIGH_FROM_LOW($dst$$Register), Amemhi);
5701 %}
5703 ins_pipe(ialu_reg_long_mem);
5704 %}
5706 // Volatile Load Long. Must be atomic, so do 64-bit FILD
5707 // then store it down to the stack and reload on the int
5708 // side.
5709 instruct loadL_volatile(stackSlotL dst, memory mem) %{
5710 predicate(UseSSE<=1 && ((LoadLNode*)n)->require_atomic_access());
5711 match(Set dst (LoadL mem));
5713 ins_cost(200);
5714 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
5715 "FISTp $dst" %}
5716 ins_encode(enc_loadL_volatile(mem,dst));
5717 ins_pipe( fpu_reg_mem );
5718 %}
5720 instruct loadLX_volatile(stackSlotL dst, memory mem, regD tmp) %{
5721 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
5722 match(Set dst (LoadL mem));
5723 effect(TEMP tmp);
5724 ins_cost(180);
5725 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
5726 "MOVSD $dst,$tmp" %}
5727 ins_encode %{
5728 __ movdbl($tmp$$XMMRegister, $mem$$Address);
5729 __ movdbl(Address(rsp, $dst$$disp), $tmp$$XMMRegister);
5730 %}
5731 ins_pipe( pipe_slow );
5732 %}
5734 instruct loadLX_reg_volatile(eRegL dst, memory mem, regD tmp) %{
5735 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
5736 match(Set dst (LoadL mem));
5737 effect(TEMP tmp);
5738 ins_cost(160);
5739 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
5740 "MOVD $dst.lo,$tmp\n\t"
5741 "PSRLQ $tmp,32\n\t"
5742 "MOVD $dst.hi,$tmp" %}
5743 ins_encode %{
5744 __ movdbl($tmp$$XMMRegister, $mem$$Address);
5745 __ movdl($dst$$Register, $tmp$$XMMRegister);
5746 __ psrlq($tmp$$XMMRegister, 32);
5747 __ movdl(HIGH_FROM_LOW($dst$$Register), $tmp$$XMMRegister);
5748 %}
5749 ins_pipe( pipe_slow );
5750 %}
5752 // Load Range
5753 instruct loadRange(rRegI dst, memory mem) %{
5754 match(Set dst (LoadRange mem));
5756 ins_cost(125);
5757 format %{ "MOV $dst,$mem" %}
5758 opcode(0x8B);
5759 ins_encode( OpcP, RegMem(dst,mem));
5760 ins_pipe( ialu_reg_mem );
5761 %}
5764 // Load Pointer
5765 instruct loadP(eRegP dst, memory mem) %{
5766 match(Set dst (LoadP mem));
5768 ins_cost(125);
5769 format %{ "MOV $dst,$mem" %}
5770 opcode(0x8B);
5771 ins_encode( OpcP, RegMem(dst,mem));
5772 ins_pipe( ialu_reg_mem );
5773 %}
5775 // Load Klass Pointer
5776 instruct loadKlass(eRegP dst, memory mem) %{
5777 match(Set dst (LoadKlass mem));
5779 ins_cost(125);
5780 format %{ "MOV $dst,$mem" %}
5781 opcode(0x8B);
5782 ins_encode( OpcP, RegMem(dst,mem));
5783 ins_pipe( ialu_reg_mem );
5784 %}
5786 // Load Double
5787 instruct loadDPR(regDPR dst, memory mem) %{
5788 predicate(UseSSE<=1);
5789 match(Set dst (LoadD mem));
5791 ins_cost(150);
5792 format %{ "FLD_D ST,$mem\n\t"
5793 "FSTP $dst" %}
5794 opcode(0xDD); /* DD /0 */
5795 ins_encode( OpcP, RMopc_Mem(0x00,mem),
5796 Pop_Reg_DPR(dst) );
5797 ins_pipe( fpu_reg_mem );
5798 %}
5800 // Load Double to XMM
5801 instruct loadD(regD dst, memory mem) %{
5802 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
5803 match(Set dst (LoadD mem));
5804 ins_cost(145);
5805 format %{ "MOVSD $dst,$mem" %}
5806 ins_encode %{
5807 __ movdbl ($dst$$XMMRegister, $mem$$Address);
5808 %}
5809 ins_pipe( pipe_slow );
5810 %}
5812 instruct loadD_partial(regD dst, memory mem) %{
5813 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
5814 match(Set dst (LoadD mem));
5815 ins_cost(145);
5816 format %{ "MOVLPD $dst,$mem" %}
5817 ins_encode %{
5818 __ movdbl ($dst$$XMMRegister, $mem$$Address);
5819 %}
5820 ins_pipe( pipe_slow );
5821 %}
5823 // Load to XMM register (single-precision floating point)
5824 // MOVSS instruction
5825 instruct loadF(regF dst, memory mem) %{
5826 predicate(UseSSE>=1);
5827 match(Set dst (LoadF mem));
5828 ins_cost(145);
5829 format %{ "MOVSS $dst,$mem" %}
5830 ins_encode %{
5831 __ movflt ($dst$$XMMRegister, $mem$$Address);
5832 %}
5833 ins_pipe( pipe_slow );
5834 %}
5836 // Load Float
5837 instruct loadFPR(regFPR dst, memory mem) %{
5838 predicate(UseSSE==0);
5839 match(Set dst (LoadF mem));
5841 ins_cost(150);
5842 format %{ "FLD_S ST,$mem\n\t"
5843 "FSTP $dst" %}
5844 opcode(0xD9); /* D9 /0 */
5845 ins_encode( OpcP, RMopc_Mem(0x00,mem),
5846 Pop_Reg_FPR(dst) );
5847 ins_pipe( fpu_reg_mem );
5848 %}
5850 // Load Effective Address
5851 instruct leaP8(eRegP dst, indOffset8 mem) %{
5852 match(Set dst mem);
5854 ins_cost(110);
5855 format %{ "LEA $dst,$mem" %}
5856 opcode(0x8D);
5857 ins_encode( OpcP, RegMem(dst,mem));
5858 ins_pipe( ialu_reg_reg_fat );
5859 %}
5861 instruct leaP32(eRegP dst, indOffset32 mem) %{
5862 match(Set dst mem);
5864 ins_cost(110);
5865 format %{ "LEA $dst,$mem" %}
5866 opcode(0x8D);
5867 ins_encode( OpcP, RegMem(dst,mem));
5868 ins_pipe( ialu_reg_reg_fat );
5869 %}
5871 instruct leaPIdxOff(eRegP dst, indIndexOffset mem) %{
5872 match(Set dst mem);
5874 ins_cost(110);
5875 format %{ "LEA $dst,$mem" %}
5876 opcode(0x8D);
5877 ins_encode( OpcP, RegMem(dst,mem));
5878 ins_pipe( ialu_reg_reg_fat );
5879 %}
5881 instruct leaPIdxScale(eRegP dst, indIndexScale mem) %{
5882 match(Set dst mem);
5884 ins_cost(110);
5885 format %{ "LEA $dst,$mem" %}
5886 opcode(0x8D);
5887 ins_encode( OpcP, RegMem(dst,mem));
5888 ins_pipe( ialu_reg_reg_fat );
5889 %}
5891 instruct leaPIdxScaleOff(eRegP dst, indIndexScaleOffset mem) %{
5892 match(Set dst mem);
5894 ins_cost(110);
5895 format %{ "LEA $dst,$mem" %}
5896 opcode(0x8D);
5897 ins_encode( OpcP, RegMem(dst,mem));
5898 ins_pipe( ialu_reg_reg_fat );
5899 %}
5901 // Load Constant
5902 instruct loadConI(rRegI dst, immI src) %{
5903 match(Set dst src);
5905 format %{ "MOV $dst,$src" %}
5906 ins_encode( LdImmI(dst, src) );
5907 ins_pipe( ialu_reg_fat );
5908 %}
5910 // Load Constant zero
5911 instruct loadConI0(rRegI dst, immI0 src, eFlagsReg cr) %{
5912 match(Set dst src);
5913 effect(KILL cr);
5915 ins_cost(50);
5916 format %{ "XOR $dst,$dst" %}
5917 opcode(0x33); /* + rd */
5918 ins_encode( OpcP, RegReg( dst, dst ) );
5919 ins_pipe( ialu_reg );
5920 %}
5922 instruct loadConP(eRegP dst, immP src) %{
5923 match(Set dst src);
5925 format %{ "MOV $dst,$src" %}
5926 opcode(0xB8); /* + rd */
5927 ins_encode( LdImmP(dst, src) );
5928 ins_pipe( ialu_reg_fat );
5929 %}
5931 instruct loadConL(eRegL dst, immL src, eFlagsReg cr) %{
5932 match(Set dst src);
5933 effect(KILL cr);
5934 ins_cost(200);
5935 format %{ "MOV $dst.lo,$src.lo\n\t"
5936 "MOV $dst.hi,$src.hi" %}
5937 opcode(0xB8);
5938 ins_encode( LdImmL_Lo(dst, src), LdImmL_Hi(dst, src) );
5939 ins_pipe( ialu_reg_long_fat );
5940 %}
5942 instruct loadConL0(eRegL dst, immL0 src, eFlagsReg cr) %{
5943 match(Set dst src);
5944 effect(KILL cr);
5945 ins_cost(150);
5946 format %{ "XOR $dst.lo,$dst.lo\n\t"
5947 "XOR $dst.hi,$dst.hi" %}
5948 opcode(0x33,0x33);
5949 ins_encode( RegReg_Lo(dst,dst), RegReg_Hi(dst, dst) );
5950 ins_pipe( ialu_reg_long );
5951 %}
5953 // The instruction usage is guarded by predicate in operand immFPR().
5954 instruct loadConFPR(regFPR dst, immFPR con) %{
5955 match(Set dst con);
5956 ins_cost(125);
5957 format %{ "FLD_S ST,[$constantaddress]\t# load from constant table: float=$con\n\t"
5958 "FSTP $dst" %}
5959 ins_encode %{
5960 __ fld_s($constantaddress($con));
5961 __ fstp_d($dst$$reg);
5962 %}
5963 ins_pipe(fpu_reg_con);
5964 %}
5966 // The instruction usage is guarded by predicate in operand immFPR0().
5967 instruct loadConFPR0(regFPR dst, immFPR0 con) %{
5968 match(Set dst con);
5969 ins_cost(125);
5970 format %{ "FLDZ ST\n\t"
5971 "FSTP $dst" %}
5972 ins_encode %{
5973 __ fldz();
5974 __ fstp_d($dst$$reg);
5975 %}
5976 ins_pipe(fpu_reg_con);
5977 %}
5979 // The instruction usage is guarded by predicate in operand immFPR1().
5980 instruct loadConFPR1(regFPR dst, immFPR1 con) %{
5981 match(Set dst con);
5982 ins_cost(125);
5983 format %{ "FLD1 ST\n\t"
5984 "FSTP $dst" %}
5985 ins_encode %{
5986 __ fld1();
5987 __ fstp_d($dst$$reg);
5988 %}
5989 ins_pipe(fpu_reg_con);
5990 %}
5992 // The instruction usage is guarded by predicate in operand immF().
5993 instruct loadConF(regF dst, immF con) %{
5994 match(Set dst con);
5995 ins_cost(125);
5996 format %{ "MOVSS $dst,[$constantaddress]\t# load from constant table: float=$con" %}
5997 ins_encode %{
5998 __ movflt($dst$$XMMRegister, $constantaddress($con));
5999 %}
6000 ins_pipe(pipe_slow);
6001 %}
6003 // The instruction usage is guarded by predicate in operand immF0().
6004 instruct loadConF0(regF dst, immF0 src) %{
6005 match(Set dst src);
6006 ins_cost(100);
6007 format %{ "XORPS $dst,$dst\t# float 0.0" %}
6008 ins_encode %{
6009 __ xorps($dst$$XMMRegister, $dst$$XMMRegister);
6010 %}
6011 ins_pipe(pipe_slow);
6012 %}
6014 // The instruction usage is guarded by predicate in operand immDPR().
6015 instruct loadConDPR(regDPR dst, immDPR con) %{
6016 match(Set dst con);
6017 ins_cost(125);
6019 format %{ "FLD_D ST,[$constantaddress]\t# load from constant table: double=$con\n\t"
6020 "FSTP $dst" %}
6021 ins_encode %{
6022 __ fld_d($constantaddress($con));
6023 __ fstp_d($dst$$reg);
6024 %}
6025 ins_pipe(fpu_reg_con);
6026 %}
6028 // The instruction usage is guarded by predicate in operand immDPR0().
6029 instruct loadConDPR0(regDPR dst, immDPR0 con) %{
6030 match(Set dst con);
6031 ins_cost(125);
6033 format %{ "FLDZ ST\n\t"
6034 "FSTP $dst" %}
6035 ins_encode %{
6036 __ fldz();
6037 __ fstp_d($dst$$reg);
6038 %}
6039 ins_pipe(fpu_reg_con);
6040 %}
6042 // The instruction usage is guarded by predicate in operand immDPR1().
6043 instruct loadConDPR1(regDPR dst, immDPR1 con) %{
6044 match(Set dst con);
6045 ins_cost(125);
6047 format %{ "FLD1 ST\n\t"
6048 "FSTP $dst" %}
6049 ins_encode %{
6050 __ fld1();
6051 __ fstp_d($dst$$reg);
6052 %}
6053 ins_pipe(fpu_reg_con);
6054 %}
6056 // The instruction usage is guarded by predicate in operand immD().
6057 instruct loadConD(regD dst, immD con) %{
6058 match(Set dst con);
6059 ins_cost(125);
6060 format %{ "MOVSD $dst,[$constantaddress]\t# load from constant table: double=$con" %}
6061 ins_encode %{
6062 __ movdbl($dst$$XMMRegister, $constantaddress($con));
6063 %}
6064 ins_pipe(pipe_slow);
6065 %}
6067 // The instruction usage is guarded by predicate in operand immD0().
6068 instruct loadConD0(regD dst, immD0 src) %{
6069 match(Set dst src);
6070 ins_cost(100);
6071 format %{ "XORPD $dst,$dst\t# double 0.0" %}
6072 ins_encode %{
6073 __ xorpd ($dst$$XMMRegister, $dst$$XMMRegister);
6074 %}
6075 ins_pipe( pipe_slow );
6076 %}
6078 // Load Stack Slot
6079 instruct loadSSI(rRegI dst, stackSlotI src) %{
6080 match(Set dst src);
6081 ins_cost(125);
6083 format %{ "MOV $dst,$src" %}
6084 opcode(0x8B);
6085 ins_encode( OpcP, RegMem(dst,src));
6086 ins_pipe( ialu_reg_mem );
6087 %}
6089 instruct loadSSL(eRegL dst, stackSlotL src) %{
6090 match(Set dst src);
6092 ins_cost(200);
6093 format %{ "MOV $dst,$src.lo\n\t"
6094 "MOV $dst+4,$src.hi" %}
6095 opcode(0x8B, 0x8B);
6096 ins_encode( OpcP, RegMem( dst, src ), OpcS, RegMem_Hi( dst, src ) );
6097 ins_pipe( ialu_mem_long_reg );
6098 %}
6100 // Load Stack Slot
6101 instruct loadSSP(eRegP dst, stackSlotP src) %{
6102 match(Set dst src);
6103 ins_cost(125);
6105 format %{ "MOV $dst,$src" %}
6106 opcode(0x8B);
6107 ins_encode( OpcP, RegMem(dst,src));
6108 ins_pipe( ialu_reg_mem );
6109 %}
6111 // Load Stack Slot
6112 instruct loadSSF(regFPR dst, stackSlotF src) %{
6113 match(Set dst src);
6114 ins_cost(125);
6116 format %{ "FLD_S $src\n\t"
6117 "FSTP $dst" %}
6118 opcode(0xD9); /* D9 /0, FLD m32real */
6119 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
6120 Pop_Reg_FPR(dst) );
6121 ins_pipe( fpu_reg_mem );
6122 %}
6124 // Load Stack Slot
6125 instruct loadSSD(regDPR dst, stackSlotD src) %{
6126 match(Set dst src);
6127 ins_cost(125);
6129 format %{ "FLD_D $src\n\t"
6130 "FSTP $dst" %}
6131 opcode(0xDD); /* DD /0, FLD m64real */
6132 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
6133 Pop_Reg_DPR(dst) );
6134 ins_pipe( fpu_reg_mem );
6135 %}
6137 // Prefetch instructions.
6138 // Must be safe to execute with invalid address (cannot fault).
6140 instruct prefetchr0( memory mem ) %{
6141 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
6142 match(PrefetchRead mem);
6143 ins_cost(0);
6144 size(0);
6145 format %{ "PREFETCHR (non-SSE is empty encoding)" %}
6146 ins_encode();
6147 ins_pipe(empty);
6148 %}
6150 instruct prefetchr( memory mem ) %{
6151 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch() || ReadPrefetchInstr==3);
6152 match(PrefetchRead mem);
6153 ins_cost(100);
6155 format %{ "PREFETCHR $mem\t! Prefetch into level 1 cache for read" %}
6156 ins_encode %{
6157 __ prefetchr($mem$$Address);
6158 %}
6159 ins_pipe(ialu_mem);
6160 %}
6162 instruct prefetchrNTA( memory mem ) %{
6163 predicate(UseSSE>=1 && ReadPrefetchInstr==0);
6164 match(PrefetchRead mem);
6165 ins_cost(100);
6167 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for read" %}
6168 ins_encode %{
6169 __ prefetchnta($mem$$Address);
6170 %}
6171 ins_pipe(ialu_mem);
6172 %}
6174 instruct prefetchrT0( memory mem ) %{
6175 predicate(UseSSE>=1 && ReadPrefetchInstr==1);
6176 match(PrefetchRead mem);
6177 ins_cost(100);
6179 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for read" %}
6180 ins_encode %{
6181 __ prefetcht0($mem$$Address);
6182 %}
6183 ins_pipe(ialu_mem);
6184 %}
6186 instruct prefetchrT2( memory mem ) %{
6187 predicate(UseSSE>=1 && ReadPrefetchInstr==2);
6188 match(PrefetchRead mem);
6189 ins_cost(100);
6191 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for read" %}
6192 ins_encode %{
6193 __ prefetcht2($mem$$Address);
6194 %}
6195 ins_pipe(ialu_mem);
6196 %}
6198 instruct prefetchw0( memory mem ) %{
6199 predicate(UseSSE==0 && !VM_Version::supports_3dnow_prefetch());
6200 match(PrefetchWrite mem);
6201 ins_cost(0);
6202 size(0);
6203 format %{ "Prefetch (non-SSE is empty encoding)" %}
6204 ins_encode();
6205 ins_pipe(empty);
6206 %}
6208 instruct prefetchw( memory mem ) %{
6209 predicate(UseSSE==0 && VM_Version::supports_3dnow_prefetch());
6210 match( PrefetchWrite mem );
6211 ins_cost(100);
6213 format %{ "PREFETCHW $mem\t! Prefetch into L1 cache and mark modified" %}
6214 ins_encode %{
6215 __ prefetchw($mem$$Address);
6216 %}
6217 ins_pipe(ialu_mem);
6218 %}
6220 instruct prefetchwNTA( memory mem ) %{
6221 predicate(UseSSE>=1);
6222 match(PrefetchWrite mem);
6223 ins_cost(100);
6225 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for write" %}
6226 ins_encode %{
6227 __ prefetchnta($mem$$Address);
6228 %}
6229 ins_pipe(ialu_mem);
6230 %}
6232 // Prefetch instructions for allocation.
6234 instruct prefetchAlloc0( memory mem ) %{
6235 predicate(UseSSE==0 && AllocatePrefetchInstr!=3);
6236 match(PrefetchAllocation mem);
6237 ins_cost(0);
6238 size(0);
6239 format %{ "Prefetch allocation (non-SSE is empty encoding)" %}
6240 ins_encode();
6241 ins_pipe(empty);
6242 %}
6244 instruct prefetchAlloc( memory mem ) %{
6245 predicate(AllocatePrefetchInstr==3);
6246 match( PrefetchAllocation mem );
6247 ins_cost(100);
6249 format %{ "PREFETCHW $mem\t! Prefetch allocation into L1 cache and mark modified" %}
6250 ins_encode %{
6251 __ prefetchw($mem$$Address);
6252 %}
6253 ins_pipe(ialu_mem);
6254 %}
6256 instruct prefetchAllocNTA( memory mem ) %{
6257 predicate(UseSSE>=1 && AllocatePrefetchInstr==0);
6258 match(PrefetchAllocation mem);
6259 ins_cost(100);
6261 format %{ "PREFETCHNTA $mem\t! Prefetch allocation into non-temporal cache for write" %}
6262 ins_encode %{
6263 __ prefetchnta($mem$$Address);
6264 %}
6265 ins_pipe(ialu_mem);
6266 %}
6268 instruct prefetchAllocT0( memory mem ) %{
6269 predicate(UseSSE>=1 && AllocatePrefetchInstr==1);
6270 match(PrefetchAllocation mem);
6271 ins_cost(100);
6273 format %{ "PREFETCHT0 $mem\t! Prefetch allocation into L1 and L2 caches for write" %}
6274 ins_encode %{
6275 __ prefetcht0($mem$$Address);
6276 %}
6277 ins_pipe(ialu_mem);
6278 %}
6280 instruct prefetchAllocT2( memory mem ) %{
6281 predicate(UseSSE>=1 && AllocatePrefetchInstr==2);
6282 match(PrefetchAllocation mem);
6283 ins_cost(100);
6285 format %{ "PREFETCHT2 $mem\t! Prefetch allocation into L2 cache for write" %}
6286 ins_encode %{
6287 __ prefetcht2($mem$$Address);
6288 %}
6289 ins_pipe(ialu_mem);
6290 %}
6292 //----------Store Instructions-------------------------------------------------
6294 // Store Byte
6295 instruct storeB(memory mem, xRegI src) %{
6296 match(Set mem (StoreB mem src));
6298 ins_cost(125);
6299 format %{ "MOV8 $mem,$src" %}
6300 opcode(0x88);
6301 ins_encode( OpcP, RegMem( src, mem ) );
6302 ins_pipe( ialu_mem_reg );
6303 %}
6305 // Store Char/Short
6306 instruct storeC(memory mem, rRegI src) %{
6307 match(Set mem (StoreC mem src));
6309 ins_cost(125);
6310 format %{ "MOV16 $mem,$src" %}
6311 opcode(0x89, 0x66);
6312 ins_encode( OpcS, OpcP, RegMem( src, mem ) );
6313 ins_pipe( ialu_mem_reg );
6314 %}
6316 // Store Integer
6317 instruct storeI(memory mem, rRegI src) %{
6318 match(Set mem (StoreI mem src));
6320 ins_cost(125);
6321 format %{ "MOV $mem,$src" %}
6322 opcode(0x89);
6323 ins_encode( OpcP, RegMem( src, mem ) );
6324 ins_pipe( ialu_mem_reg );
6325 %}
6327 // Store Long
6328 instruct storeL(long_memory mem, eRegL src) %{
6329 predicate(!((StoreLNode*)n)->require_atomic_access());
6330 match(Set mem (StoreL mem src));
6332 ins_cost(200);
6333 format %{ "MOV $mem,$src.lo\n\t"
6334 "MOV $mem+4,$src.hi" %}
6335 opcode(0x89, 0x89);
6336 ins_encode( OpcP, RegMem( src, mem ), OpcS, RegMem_Hi( src, mem ) );
6337 ins_pipe( ialu_mem_long_reg );
6338 %}
6340 // Store Long to Integer
6341 instruct storeL2I(memory mem, eRegL src) %{
6342 match(Set mem (StoreI mem (ConvL2I src)));
6344 format %{ "MOV $mem,$src.lo\t# long -> int" %}
6345 ins_encode %{
6346 __ movl($mem$$Address, $src$$Register);
6347 %}
6348 ins_pipe(ialu_mem_reg);
6349 %}
6351 // Volatile Store Long. Must be atomic, so move it into
6352 // the FP TOS and then do a 64-bit FIST. Has to probe the
6353 // target address before the store (for null-ptr checks)
6354 // so the memory operand is used twice in the encoding.
6355 instruct storeL_volatile(memory mem, stackSlotL src, eFlagsReg cr ) %{
6356 predicate(UseSSE<=1 && ((StoreLNode*)n)->require_atomic_access());
6357 match(Set mem (StoreL mem src));
6358 effect( KILL cr );
6359 ins_cost(400);
6360 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6361 "FILD $src\n\t"
6362 "FISTp $mem\t # 64-bit atomic volatile long store" %}
6363 opcode(0x3B);
6364 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeL_volatile(mem,src));
6365 ins_pipe( fpu_reg_mem );
6366 %}
6368 instruct storeLX_volatile(memory mem, stackSlotL src, regD tmp, eFlagsReg cr) %{
6369 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
6370 match(Set mem (StoreL mem src));
6371 effect( TEMP tmp, KILL cr );
6372 ins_cost(380);
6373 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6374 "MOVSD $tmp,$src\n\t"
6375 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
6376 ins_encode %{
6377 __ cmpl(rax, $mem$$Address);
6378 __ movdbl($tmp$$XMMRegister, Address(rsp, $src$$disp));
6379 __ movdbl($mem$$Address, $tmp$$XMMRegister);
6380 %}
6381 ins_pipe( pipe_slow );
6382 %}
6384 instruct storeLX_reg_volatile(memory mem, eRegL src, regD tmp2, regD tmp, eFlagsReg cr) %{
6385 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
6386 match(Set mem (StoreL mem src));
6387 effect( TEMP tmp2 , TEMP tmp, KILL cr );
6388 ins_cost(360);
6389 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
6390 "MOVD $tmp,$src.lo\n\t"
6391 "MOVD $tmp2,$src.hi\n\t"
6392 "PUNPCKLDQ $tmp,$tmp2\n\t"
6393 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
6394 ins_encode %{
6395 __ cmpl(rax, $mem$$Address);
6396 __ movdl($tmp$$XMMRegister, $src$$Register);
6397 __ movdl($tmp2$$XMMRegister, HIGH_FROM_LOW($src$$Register));
6398 __ punpckldq($tmp$$XMMRegister, $tmp2$$XMMRegister);
6399 __ movdbl($mem$$Address, $tmp$$XMMRegister);
6400 %}
6401 ins_pipe( pipe_slow );
6402 %}
6404 // Store Pointer; for storing unknown oops and raw pointers
6405 instruct storeP(memory mem, anyRegP src) %{
6406 match(Set mem (StoreP mem src));
6408 ins_cost(125);
6409 format %{ "MOV $mem,$src" %}
6410 opcode(0x89);
6411 ins_encode( OpcP, RegMem( src, mem ) );
6412 ins_pipe( ialu_mem_reg );
6413 %}
6415 // Store Integer Immediate
6416 instruct storeImmI(memory mem, immI src) %{
6417 match(Set mem (StoreI mem src));
6419 ins_cost(150);
6420 format %{ "MOV $mem,$src" %}
6421 opcode(0xC7); /* C7 /0 */
6422 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
6423 ins_pipe( ialu_mem_imm );
6424 %}
6426 // Store Short/Char Immediate
6427 instruct storeImmI16(memory mem, immI16 src) %{
6428 predicate(UseStoreImmI16);
6429 match(Set mem (StoreC mem src));
6431 ins_cost(150);
6432 format %{ "MOV16 $mem,$src" %}
6433 opcode(0xC7); /* C7 /0 Same as 32 store immediate with prefix */
6434 ins_encode( SizePrefix, OpcP, RMopc_Mem(0x00,mem), Con16( src ));
6435 ins_pipe( ialu_mem_imm );
6436 %}
6438 // Store Pointer Immediate; null pointers or constant oops that do not
6439 // need card-mark barriers.
6440 instruct storeImmP(memory mem, immP src) %{
6441 match(Set mem (StoreP mem src));
6443 ins_cost(150);
6444 format %{ "MOV $mem,$src" %}
6445 opcode(0xC7); /* C7 /0 */
6446 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
6447 ins_pipe( ialu_mem_imm );
6448 %}
6450 // Store Byte Immediate
6451 instruct storeImmB(memory mem, immI8 src) %{
6452 match(Set mem (StoreB mem src));
6454 ins_cost(150);
6455 format %{ "MOV8 $mem,$src" %}
6456 opcode(0xC6); /* C6 /0 */
6457 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
6458 ins_pipe( ialu_mem_imm );
6459 %}
6461 // Store CMS card-mark Immediate
6462 instruct storeImmCM(memory mem, immI8 src) %{
6463 match(Set mem (StoreCM mem src));
6465 ins_cost(150);
6466 format %{ "MOV8 $mem,$src\t! CMS card-mark imm0" %}
6467 opcode(0xC6); /* C6 /0 */
6468 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
6469 ins_pipe( ialu_mem_imm );
6470 %}
6472 // Store Double
6473 instruct storeDPR( memory mem, regDPR1 src) %{
6474 predicate(UseSSE<=1);
6475 match(Set mem (StoreD mem src));
6477 ins_cost(100);
6478 format %{ "FST_D $mem,$src" %}
6479 opcode(0xDD); /* DD /2 */
6480 ins_encode( enc_FPR_store(mem,src) );
6481 ins_pipe( fpu_mem_reg );
6482 %}
6484 // Store double does rounding on x86
6485 instruct storeDPR_rounded( memory mem, regDPR1 src) %{
6486 predicate(UseSSE<=1);
6487 match(Set mem (StoreD mem (RoundDouble src)));
6489 ins_cost(100);
6490 format %{ "FST_D $mem,$src\t# round" %}
6491 opcode(0xDD); /* DD /2 */
6492 ins_encode( enc_FPR_store(mem,src) );
6493 ins_pipe( fpu_mem_reg );
6494 %}
6496 // Store XMM register to memory (double-precision floating points)
6497 // MOVSD instruction
6498 instruct storeD(memory mem, regD src) %{
6499 predicate(UseSSE>=2);
6500 match(Set mem (StoreD mem src));
6501 ins_cost(95);
6502 format %{ "MOVSD $mem,$src" %}
6503 ins_encode %{
6504 __ movdbl($mem$$Address, $src$$XMMRegister);
6505 %}
6506 ins_pipe( pipe_slow );
6507 %}
6509 // Store XMM register to memory (single-precision floating point)
6510 // MOVSS instruction
6511 instruct storeF(memory mem, regF src) %{
6512 predicate(UseSSE>=1);
6513 match(Set mem (StoreF mem src));
6514 ins_cost(95);
6515 format %{ "MOVSS $mem,$src" %}
6516 ins_encode %{
6517 __ movflt($mem$$Address, $src$$XMMRegister);
6518 %}
6519 ins_pipe( pipe_slow );
6520 %}
6522 // Store Float
6523 instruct storeFPR( memory mem, regFPR1 src) %{
6524 predicate(UseSSE==0);
6525 match(Set mem (StoreF mem src));
6527 ins_cost(100);
6528 format %{ "FST_S $mem,$src" %}
6529 opcode(0xD9); /* D9 /2 */
6530 ins_encode( enc_FPR_store(mem,src) );
6531 ins_pipe( fpu_mem_reg );
6532 %}
6534 // Store Float does rounding on x86
6535 instruct storeFPR_rounded( memory mem, regFPR1 src) %{
6536 predicate(UseSSE==0);
6537 match(Set mem (StoreF mem (RoundFloat src)));
6539 ins_cost(100);
6540 format %{ "FST_S $mem,$src\t# round" %}
6541 opcode(0xD9); /* D9 /2 */
6542 ins_encode( enc_FPR_store(mem,src) );
6543 ins_pipe( fpu_mem_reg );
6544 %}
6546 // Store Float does rounding on x86
6547 instruct storeFPR_Drounded( memory mem, regDPR1 src) %{
6548 predicate(UseSSE<=1);
6549 match(Set mem (StoreF mem (ConvD2F src)));
6551 ins_cost(100);
6552 format %{ "FST_S $mem,$src\t# D-round" %}
6553 opcode(0xD9); /* D9 /2 */
6554 ins_encode( enc_FPR_store(mem,src) );
6555 ins_pipe( fpu_mem_reg );
6556 %}
6558 // Store immediate Float value (it is faster than store from FPU register)
6559 // The instruction usage is guarded by predicate in operand immFPR().
6560 instruct storeFPR_imm( memory mem, immFPR src) %{
6561 match(Set mem (StoreF mem src));
6563 ins_cost(50);
6564 format %{ "MOV $mem,$src\t# store float" %}
6565 opcode(0xC7); /* C7 /0 */
6566 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32FPR_as_bits( src ));
6567 ins_pipe( ialu_mem_imm );
6568 %}
6570 // Store immediate Float value (it is faster than store from XMM register)
6571 // The instruction usage is guarded by predicate in operand immF().
6572 instruct storeF_imm( memory mem, immF src) %{
6573 match(Set mem (StoreF mem src));
6575 ins_cost(50);
6576 format %{ "MOV $mem,$src\t# store float" %}
6577 opcode(0xC7); /* C7 /0 */
6578 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32F_as_bits( src ));
6579 ins_pipe( ialu_mem_imm );
6580 %}
6582 // Store Integer to stack slot
6583 instruct storeSSI(stackSlotI dst, rRegI src) %{
6584 match(Set dst src);
6586 ins_cost(100);
6587 format %{ "MOV $dst,$src" %}
6588 opcode(0x89);
6589 ins_encode( OpcPRegSS( dst, src ) );
6590 ins_pipe( ialu_mem_reg );
6591 %}
6593 // Store Integer to stack slot
6594 instruct storeSSP(stackSlotP dst, eRegP src) %{
6595 match(Set dst src);
6597 ins_cost(100);
6598 format %{ "MOV $dst,$src" %}
6599 opcode(0x89);
6600 ins_encode( OpcPRegSS( dst, src ) );
6601 ins_pipe( ialu_mem_reg );
6602 %}
6604 // Store Long to stack slot
6605 instruct storeSSL(stackSlotL dst, eRegL src) %{
6606 match(Set dst src);
6608 ins_cost(200);
6609 format %{ "MOV $dst,$src.lo\n\t"
6610 "MOV $dst+4,$src.hi" %}
6611 opcode(0x89, 0x89);
6612 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
6613 ins_pipe( ialu_mem_long_reg );
6614 %}
6616 //----------MemBar Instructions-----------------------------------------------
6617 // Memory barrier flavors
6619 instruct membar_acquire() %{
6620 match(MemBarAcquire);
6621 match(LoadFence);
6622 ins_cost(400);
6624 size(0);
6625 format %{ "MEMBAR-acquire ! (empty encoding)" %}
6626 ins_encode();
6627 ins_pipe(empty);
6628 %}
6630 instruct membar_acquire_lock() %{
6631 match(MemBarAcquireLock);
6632 ins_cost(0);
6634 size(0);
6635 format %{ "MEMBAR-acquire (prior CMPXCHG in FastLock so empty encoding)" %}
6636 ins_encode( );
6637 ins_pipe(empty);
6638 %}
6640 instruct membar_release() %{
6641 match(MemBarRelease);
6642 match(StoreFence);
6643 ins_cost(400);
6645 size(0);
6646 format %{ "MEMBAR-release ! (empty encoding)" %}
6647 ins_encode( );
6648 ins_pipe(empty);
6649 %}
6651 instruct membar_release_lock() %{
6652 match(MemBarReleaseLock);
6653 ins_cost(0);
6655 size(0);
6656 format %{ "MEMBAR-release (a FastUnlock follows so empty encoding)" %}
6657 ins_encode( );
6658 ins_pipe(empty);
6659 %}
6661 instruct membar_volatile(eFlagsReg cr) %{
6662 match(MemBarVolatile);
6663 effect(KILL cr);
6664 ins_cost(400);
6666 format %{
6667 $$template
6668 if (os::is_MP()) {
6669 $$emit$$"LOCK ADDL [ESP + #0], 0\t! membar_volatile"
6670 } else {
6671 $$emit$$"MEMBAR-volatile ! (empty encoding)"
6672 }
6673 %}
6674 ins_encode %{
6675 __ membar(Assembler::StoreLoad);
6676 %}
6677 ins_pipe(pipe_slow);
6678 %}
6680 instruct unnecessary_membar_volatile() %{
6681 match(MemBarVolatile);
6682 predicate(Matcher::post_store_load_barrier(n));
6683 ins_cost(0);
6685 size(0);
6686 format %{ "MEMBAR-volatile (unnecessary so empty encoding)" %}
6687 ins_encode( );
6688 ins_pipe(empty);
6689 %}
6691 instruct membar_storestore() %{
6692 match(MemBarStoreStore);
6693 ins_cost(0);
6695 size(0);
6696 format %{ "MEMBAR-storestore (empty encoding)" %}
6697 ins_encode( );
6698 ins_pipe(empty);
6699 %}
6701 //----------Move Instructions--------------------------------------------------
6702 instruct castX2P(eAXRegP dst, eAXRegI src) %{
6703 match(Set dst (CastX2P src));
6704 format %{ "# X2P $dst, $src" %}
6705 ins_encode( /*empty encoding*/ );
6706 ins_cost(0);
6707 ins_pipe(empty);
6708 %}
6710 instruct castP2X(rRegI dst, eRegP src ) %{
6711 match(Set dst (CastP2X src));
6712 ins_cost(50);
6713 format %{ "MOV $dst, $src\t# CastP2X" %}
6714 ins_encode( enc_Copy( dst, src) );
6715 ins_pipe( ialu_reg_reg );
6716 %}
6718 //----------Conditional Move---------------------------------------------------
6719 // Conditional move
6720 instruct jmovI_reg(cmpOp cop, eFlagsReg cr, rRegI dst, rRegI src) %{
6721 predicate(!VM_Version::supports_cmov() );
6722 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
6723 ins_cost(200);
6724 format %{ "J$cop,us skip\t# signed cmove\n\t"
6725 "MOV $dst,$src\n"
6726 "skip:" %}
6727 ins_encode %{
6728 Label Lskip;
6729 // Invert sense of branch from sense of CMOV
6730 __ jccb((Assembler::Condition)($cop$$cmpcode^1), Lskip);
6731 __ movl($dst$$Register, $src$$Register);
6732 __ bind(Lskip);
6733 %}
6734 ins_pipe( pipe_cmov_reg );
6735 %}
6737 instruct jmovI_regU(cmpOpU cop, eFlagsRegU cr, rRegI dst, rRegI src) %{
6738 predicate(!VM_Version::supports_cmov() );
6739 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
6740 ins_cost(200);
6741 format %{ "J$cop,us skip\t# unsigned cmove\n\t"
6742 "MOV $dst,$src\n"
6743 "skip:" %}
6744 ins_encode %{
6745 Label Lskip;
6746 // Invert sense of branch from sense of CMOV
6747 __ jccb((Assembler::Condition)($cop$$cmpcode^1), Lskip);
6748 __ movl($dst$$Register, $src$$Register);
6749 __ bind(Lskip);
6750 %}
6751 ins_pipe( pipe_cmov_reg );
6752 %}
6754 instruct cmovI_reg(rRegI dst, rRegI src, eFlagsReg cr, cmpOp cop ) %{
6755 predicate(VM_Version::supports_cmov() );
6756 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
6757 ins_cost(200);
6758 format %{ "CMOV$cop $dst,$src" %}
6759 opcode(0x0F,0x40);
6760 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
6761 ins_pipe( pipe_cmov_reg );
6762 %}
6764 instruct cmovI_regU( cmpOpU cop, eFlagsRegU cr, rRegI dst, rRegI src ) %{
6765 predicate(VM_Version::supports_cmov() );
6766 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
6767 ins_cost(200);
6768 format %{ "CMOV$cop $dst,$src" %}
6769 opcode(0x0F,0x40);
6770 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
6771 ins_pipe( pipe_cmov_reg );
6772 %}
6774 instruct cmovI_regUCF( cmpOpUCF cop, eFlagsRegUCF cr, rRegI dst, rRegI src ) %{
6775 predicate(VM_Version::supports_cmov() );
6776 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
6777 ins_cost(200);
6778 expand %{
6779 cmovI_regU(cop, cr, dst, src);
6780 %}
6781 %}
6783 // Conditional move
6784 instruct cmovI_mem(cmpOp cop, eFlagsReg cr, rRegI dst, memory src) %{
6785 predicate(VM_Version::supports_cmov() );
6786 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
6787 ins_cost(250);
6788 format %{ "CMOV$cop $dst,$src" %}
6789 opcode(0x0F,0x40);
6790 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
6791 ins_pipe( pipe_cmov_mem );
6792 %}
6794 // Conditional move
6795 instruct cmovI_memU(cmpOpU cop, eFlagsRegU cr, rRegI dst, memory src) %{
6796 predicate(VM_Version::supports_cmov() );
6797 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
6798 ins_cost(250);
6799 format %{ "CMOV$cop $dst,$src" %}
6800 opcode(0x0F,0x40);
6801 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
6802 ins_pipe( pipe_cmov_mem );
6803 %}
6805 instruct cmovI_memUCF(cmpOpUCF cop, eFlagsRegUCF cr, rRegI dst, memory src) %{
6806 predicate(VM_Version::supports_cmov() );
6807 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
6808 ins_cost(250);
6809 expand %{
6810 cmovI_memU(cop, cr, dst, src);
6811 %}
6812 %}
6814 // Conditional move
6815 instruct cmovP_reg(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
6816 predicate(VM_Version::supports_cmov() );
6817 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
6818 ins_cost(200);
6819 format %{ "CMOV$cop $dst,$src\t# ptr" %}
6820 opcode(0x0F,0x40);
6821 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
6822 ins_pipe( pipe_cmov_reg );
6823 %}
6825 // Conditional move (non-P6 version)
6826 // Note: a CMoveP is generated for stubs and native wrappers
6827 // regardless of whether we are on a P6, so we
6828 // emulate a cmov here
6829 instruct cmovP_reg_nonP6(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
6830 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
6831 ins_cost(300);
6832 format %{ "Jn$cop skip\n\t"
6833 "MOV $dst,$src\t# pointer\n"
6834 "skip:" %}
6835 opcode(0x8b);
6836 ins_encode( enc_cmov_branch(cop, 0x2), OpcP, RegReg(dst, src));
6837 ins_pipe( pipe_cmov_reg );
6838 %}
6840 // Conditional move
6841 instruct cmovP_regU(cmpOpU cop, eFlagsRegU cr, eRegP dst, eRegP src ) %{
6842 predicate(VM_Version::supports_cmov() );
6843 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
6844 ins_cost(200);
6845 format %{ "CMOV$cop $dst,$src\t# ptr" %}
6846 opcode(0x0F,0x40);
6847 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
6848 ins_pipe( pipe_cmov_reg );
6849 %}
6851 instruct cmovP_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegP dst, eRegP src ) %{
6852 predicate(VM_Version::supports_cmov() );
6853 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
6854 ins_cost(200);
6855 expand %{
6856 cmovP_regU(cop, cr, dst, src);
6857 %}
6858 %}
6860 // DISABLED: Requires the ADLC to emit a bottom_type call that
6861 // correctly meets the two pointer arguments; one is an incoming
6862 // register but the other is a memory operand. ALSO appears to
6863 // be buggy with implicit null checks.
6864 //
6865 //// Conditional move
6866 //instruct cmovP_mem(cmpOp cop, eFlagsReg cr, eRegP dst, memory src) %{
6867 // predicate(VM_Version::supports_cmov() );
6868 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
6869 // ins_cost(250);
6870 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
6871 // opcode(0x0F,0x40);
6872 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
6873 // ins_pipe( pipe_cmov_mem );
6874 //%}
6875 //
6876 //// Conditional move
6877 //instruct cmovP_memU(cmpOpU cop, eFlagsRegU cr, eRegP dst, memory src) %{
6878 // predicate(VM_Version::supports_cmov() );
6879 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
6880 // ins_cost(250);
6881 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
6882 // opcode(0x0F,0x40);
6883 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
6884 // ins_pipe( pipe_cmov_mem );
6885 //%}
6887 // Conditional move
6888 instruct fcmovDPR_regU(cmpOp_fcmov cop, eFlagsRegU cr, regDPR1 dst, regDPR src) %{
6889 predicate(UseSSE<=1);
6890 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
6891 ins_cost(200);
6892 format %{ "FCMOV$cop $dst,$src\t# double" %}
6893 opcode(0xDA);
6894 ins_encode( enc_cmov_dpr(cop,src) );
6895 ins_pipe( pipe_cmovDPR_reg );
6896 %}
6898 // Conditional move
6899 instruct fcmovFPR_regU(cmpOp_fcmov cop, eFlagsRegU cr, regFPR1 dst, regFPR src) %{
6900 predicate(UseSSE==0);
6901 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
6902 ins_cost(200);
6903 format %{ "FCMOV$cop $dst,$src\t# float" %}
6904 opcode(0xDA);
6905 ins_encode( enc_cmov_dpr(cop,src) );
6906 ins_pipe( pipe_cmovDPR_reg );
6907 %}
6909 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
6910 instruct fcmovDPR_regS(cmpOp cop, eFlagsReg cr, regDPR dst, regDPR src) %{
6911 predicate(UseSSE<=1);
6912 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
6913 ins_cost(200);
6914 format %{ "Jn$cop skip\n\t"
6915 "MOV $dst,$src\t# double\n"
6916 "skip:" %}
6917 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
6918 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_DPR(src), OpcP, RegOpc(dst) );
6919 ins_pipe( pipe_cmovDPR_reg );
6920 %}
6922 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
6923 instruct fcmovFPR_regS(cmpOp cop, eFlagsReg cr, regFPR dst, regFPR src) %{
6924 predicate(UseSSE==0);
6925 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
6926 ins_cost(200);
6927 format %{ "Jn$cop skip\n\t"
6928 "MOV $dst,$src\t# float\n"
6929 "skip:" %}
6930 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
6931 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_FPR(src), OpcP, RegOpc(dst) );
6932 ins_pipe( pipe_cmovDPR_reg );
6933 %}
6935 // No CMOVE with SSE/SSE2
6936 instruct fcmovF_regS(cmpOp cop, eFlagsReg cr, regF dst, regF src) %{
6937 predicate (UseSSE>=1);
6938 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
6939 ins_cost(200);
6940 format %{ "Jn$cop skip\n\t"
6941 "MOVSS $dst,$src\t# float\n"
6942 "skip:" %}
6943 ins_encode %{
6944 Label skip;
6945 // Invert sense of branch from sense of CMOV
6946 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
6947 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
6948 __ bind(skip);
6949 %}
6950 ins_pipe( pipe_slow );
6951 %}
6953 // No CMOVE with SSE/SSE2
6954 instruct fcmovD_regS(cmpOp cop, eFlagsReg cr, regD dst, regD src) %{
6955 predicate (UseSSE>=2);
6956 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
6957 ins_cost(200);
6958 format %{ "Jn$cop skip\n\t"
6959 "MOVSD $dst,$src\t# float\n"
6960 "skip:" %}
6961 ins_encode %{
6962 Label skip;
6963 // Invert sense of branch from sense of CMOV
6964 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
6965 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
6966 __ bind(skip);
6967 %}
6968 ins_pipe( pipe_slow );
6969 %}
6971 // unsigned version
6972 instruct fcmovF_regU(cmpOpU cop, eFlagsRegU cr, regF dst, regF src) %{
6973 predicate (UseSSE>=1);
6974 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
6975 ins_cost(200);
6976 format %{ "Jn$cop skip\n\t"
6977 "MOVSS $dst,$src\t# float\n"
6978 "skip:" %}
6979 ins_encode %{
6980 Label skip;
6981 // Invert sense of branch from sense of CMOV
6982 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
6983 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
6984 __ bind(skip);
6985 %}
6986 ins_pipe( pipe_slow );
6987 %}
6989 instruct fcmovF_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regF dst, regF src) %{
6990 predicate (UseSSE>=1);
6991 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
6992 ins_cost(200);
6993 expand %{
6994 fcmovF_regU(cop, cr, dst, src);
6995 %}
6996 %}
6998 // unsigned version
6999 instruct fcmovD_regU(cmpOpU cop, eFlagsRegU cr, regD dst, regD src) %{
7000 predicate (UseSSE>=2);
7001 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7002 ins_cost(200);
7003 format %{ "Jn$cop skip\n\t"
7004 "MOVSD $dst,$src\t# float\n"
7005 "skip:" %}
7006 ins_encode %{
7007 Label skip;
7008 // Invert sense of branch from sense of CMOV
7009 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
7010 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
7011 __ bind(skip);
7012 %}
7013 ins_pipe( pipe_slow );
7014 %}
7016 instruct fcmovD_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regD dst, regD src) %{
7017 predicate (UseSSE>=2);
7018 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7019 ins_cost(200);
7020 expand %{
7021 fcmovD_regU(cop, cr, dst, src);
7022 %}
7023 %}
7025 instruct cmovL_reg(cmpOp cop, eFlagsReg cr, eRegL dst, eRegL src) %{
7026 predicate(VM_Version::supports_cmov() );
7027 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7028 ins_cost(200);
7029 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
7030 "CMOV$cop $dst.hi,$src.hi" %}
7031 opcode(0x0F,0x40);
7032 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
7033 ins_pipe( pipe_cmov_reg_long );
7034 %}
7036 instruct cmovL_regU(cmpOpU cop, eFlagsRegU cr, eRegL dst, eRegL src) %{
7037 predicate(VM_Version::supports_cmov() );
7038 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7039 ins_cost(200);
7040 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
7041 "CMOV$cop $dst.hi,$src.hi" %}
7042 opcode(0x0F,0x40);
7043 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
7044 ins_pipe( pipe_cmov_reg_long );
7045 %}
7047 instruct cmovL_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegL dst, eRegL src) %{
7048 predicate(VM_Version::supports_cmov() );
7049 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
7050 ins_cost(200);
7051 expand %{
7052 cmovL_regU(cop, cr, dst, src);
7053 %}
7054 %}
7056 //----------Arithmetic Instructions--------------------------------------------
7057 //----------Addition Instructions----------------------------------------------
7059 // Integer Addition Instructions
7060 instruct addI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7061 match(Set dst (AddI dst src));
7062 effect(KILL cr);
7064 size(2);
7065 format %{ "ADD $dst,$src" %}
7066 opcode(0x03);
7067 ins_encode( OpcP, RegReg( dst, src) );
7068 ins_pipe( ialu_reg_reg );
7069 %}
7071 instruct addI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
7072 match(Set dst (AddI dst src));
7073 effect(KILL cr);
7075 format %{ "ADD $dst,$src" %}
7076 opcode(0x81, 0x00); /* /0 id */
7077 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7078 ins_pipe( ialu_reg );
7079 %}
7081 instruct incI_eReg(rRegI dst, immI1 src, eFlagsReg cr) %{
7082 predicate(UseIncDec);
7083 match(Set dst (AddI dst src));
7084 effect(KILL cr);
7086 size(1);
7087 format %{ "INC $dst" %}
7088 opcode(0x40); /* */
7089 ins_encode( Opc_plus( primary, dst ) );
7090 ins_pipe( ialu_reg );
7091 %}
7093 instruct leaI_eReg_immI(rRegI dst, rRegI src0, immI src1) %{
7094 match(Set dst (AddI src0 src1));
7095 ins_cost(110);
7097 format %{ "LEA $dst,[$src0 + $src1]" %}
7098 opcode(0x8D); /* 0x8D /r */
7099 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
7100 ins_pipe( ialu_reg_reg );
7101 %}
7103 instruct leaP_eReg_immI(eRegP dst, eRegP src0, immI src1) %{
7104 match(Set dst (AddP src0 src1));
7105 ins_cost(110);
7107 format %{ "LEA $dst,[$src0 + $src1]\t# ptr" %}
7108 opcode(0x8D); /* 0x8D /r */
7109 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
7110 ins_pipe( ialu_reg_reg );
7111 %}
7113 instruct decI_eReg(rRegI dst, immI_M1 src, eFlagsReg cr) %{
7114 predicate(UseIncDec);
7115 match(Set dst (AddI dst src));
7116 effect(KILL cr);
7118 size(1);
7119 format %{ "DEC $dst" %}
7120 opcode(0x48); /* */
7121 ins_encode( Opc_plus( primary, dst ) );
7122 ins_pipe( ialu_reg );
7123 %}
7125 instruct addP_eReg(eRegP dst, rRegI src, eFlagsReg cr) %{
7126 match(Set dst (AddP dst src));
7127 effect(KILL cr);
7129 size(2);
7130 format %{ "ADD $dst,$src" %}
7131 opcode(0x03);
7132 ins_encode( OpcP, RegReg( dst, src) );
7133 ins_pipe( ialu_reg_reg );
7134 %}
7136 instruct addP_eReg_imm(eRegP dst, immI src, eFlagsReg cr) %{
7137 match(Set dst (AddP dst src));
7138 effect(KILL cr);
7140 format %{ "ADD $dst,$src" %}
7141 opcode(0x81,0x00); /* Opcode 81 /0 id */
7142 // ins_encode( RegImm( dst, src) );
7143 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7144 ins_pipe( ialu_reg );
7145 %}
7147 instruct addI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
7148 match(Set dst (AddI dst (LoadI src)));
7149 effect(KILL cr);
7151 ins_cost(125);
7152 format %{ "ADD $dst,$src" %}
7153 opcode(0x03);
7154 ins_encode( OpcP, RegMem( dst, src) );
7155 ins_pipe( ialu_reg_mem );
7156 %}
7158 instruct addI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
7159 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7160 effect(KILL cr);
7162 ins_cost(150);
7163 format %{ "ADD $dst,$src" %}
7164 opcode(0x01); /* Opcode 01 /r */
7165 ins_encode( OpcP, RegMem( src, dst ) );
7166 ins_pipe( ialu_mem_reg );
7167 %}
7169 // Add Memory with Immediate
7170 instruct addI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
7171 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7172 effect(KILL cr);
7174 ins_cost(125);
7175 format %{ "ADD $dst,$src" %}
7176 opcode(0x81); /* Opcode 81 /0 id */
7177 ins_encode( OpcSE( src ), RMopc_Mem(0x00,dst), Con8or32( src ) );
7178 ins_pipe( ialu_mem_imm );
7179 %}
7181 instruct incI_mem(memory dst, immI1 src, eFlagsReg cr) %{
7182 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7183 effect(KILL cr);
7185 ins_cost(125);
7186 format %{ "INC $dst" %}
7187 opcode(0xFF); /* Opcode FF /0 */
7188 ins_encode( OpcP, RMopc_Mem(0x00,dst));
7189 ins_pipe( ialu_mem_imm );
7190 %}
7192 instruct decI_mem(memory dst, immI_M1 src, eFlagsReg cr) %{
7193 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
7194 effect(KILL cr);
7196 ins_cost(125);
7197 format %{ "DEC $dst" %}
7198 opcode(0xFF); /* Opcode FF /1 */
7199 ins_encode( OpcP, RMopc_Mem(0x01,dst));
7200 ins_pipe( ialu_mem_imm );
7201 %}
7204 instruct checkCastPP( eRegP dst ) %{
7205 match(Set dst (CheckCastPP dst));
7207 size(0);
7208 format %{ "#checkcastPP of $dst" %}
7209 ins_encode( /*empty encoding*/ );
7210 ins_pipe( empty );
7211 %}
7213 instruct castPP( eRegP dst ) %{
7214 match(Set dst (CastPP dst));
7215 format %{ "#castPP of $dst" %}
7216 ins_encode( /*empty encoding*/ );
7217 ins_pipe( empty );
7218 %}
7220 instruct castII( rRegI dst ) %{
7221 match(Set dst (CastII dst));
7222 format %{ "#castII of $dst" %}
7223 ins_encode( /*empty encoding*/ );
7224 ins_cost(0);
7225 ins_pipe( empty );
7226 %}
7229 // Load-locked - same as a regular pointer load when used with compare-swap
7230 instruct loadPLocked(eRegP dst, memory mem) %{
7231 match(Set dst (LoadPLocked mem));
7233 ins_cost(125);
7234 format %{ "MOV $dst,$mem\t# Load ptr. locked" %}
7235 opcode(0x8B);
7236 ins_encode( OpcP, RegMem(dst,mem));
7237 ins_pipe( ialu_reg_mem );
7238 %}
7240 // Conditional-store of the updated heap-top.
7241 // Used during allocation of the shared heap.
7242 // Sets flags (EQ) on success. Implemented with a CMPXCHG on Intel.
7243 instruct storePConditional( memory heap_top_ptr, eAXRegP oldval, eRegP newval, eFlagsReg cr ) %{
7244 match(Set cr (StorePConditional heap_top_ptr (Binary oldval newval)));
7245 // EAX is killed if there is contention, but then it's also unused.
7246 // In the common case of no contention, EAX holds the new oop address.
7247 format %{ "CMPXCHG $heap_top_ptr,$newval\t# If EAX==$heap_top_ptr Then store $newval into $heap_top_ptr" %}
7248 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval,heap_top_ptr) );
7249 ins_pipe( pipe_cmpxchg );
7250 %}
7252 // Conditional-store of an int value.
7253 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG on Intel.
7254 instruct storeIConditional( memory mem, eAXRegI oldval, rRegI newval, eFlagsReg cr ) %{
7255 match(Set cr (StoreIConditional mem (Binary oldval newval)));
7256 effect(KILL oldval);
7257 format %{ "CMPXCHG $mem,$newval\t# If EAX==$mem Then store $newval into $mem" %}
7258 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval, mem) );
7259 ins_pipe( pipe_cmpxchg );
7260 %}
7262 // Conditional-store of a long value.
7263 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG8 on Intel.
7264 instruct storeLConditional( memory mem, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
7265 match(Set cr (StoreLConditional mem (Binary oldval newval)));
7266 effect(KILL oldval);
7267 format %{ "XCHG EBX,ECX\t# correct order for CMPXCHG8 instruction\n\t"
7268 "CMPXCHG8 $mem,ECX:EBX\t# If EDX:EAX==$mem Then store ECX:EBX into $mem\n\t"
7269 "XCHG EBX,ECX"
7270 %}
7271 ins_encode %{
7272 // Note: we need to swap rbx, and rcx before and after the
7273 // cmpxchg8 instruction because the instruction uses
7274 // rcx as the high order word of the new value to store but
7275 // our register encoding uses rbx.
7276 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
7277 if( os::is_MP() )
7278 __ lock();
7279 __ cmpxchg8($mem$$Address);
7280 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
7281 %}
7282 ins_pipe( pipe_cmpxchg );
7283 %}
7285 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them
7287 instruct compareAndSwapL( rRegI res, eSIRegP mem_ptr, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
7288 predicate(VM_Version::supports_cx8());
7289 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval)));
7290 effect(KILL cr, KILL oldval);
7291 format %{ "CMPXCHG8 [$mem_ptr],$newval\t# If EDX:EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7292 "MOV $res,0\n\t"
7293 "JNE,s fail\n\t"
7294 "MOV $res,1\n"
7295 "fail:" %}
7296 ins_encode( enc_cmpxchg8(mem_ptr),
7297 enc_flags_ne_to_boolean(res) );
7298 ins_pipe( pipe_cmpxchg );
7299 %}
7301 instruct compareAndSwapP( rRegI res, pRegP mem_ptr, eAXRegP oldval, eCXRegP newval, eFlagsReg cr) %{
7302 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval)));
7303 effect(KILL cr, KILL oldval);
7304 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7305 "MOV $res,0\n\t"
7306 "JNE,s fail\n\t"
7307 "MOV $res,1\n"
7308 "fail:" %}
7309 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
7310 ins_pipe( pipe_cmpxchg );
7311 %}
7313 instruct compareAndSwapI( rRegI res, pRegP mem_ptr, eAXRegI oldval, eCXRegI newval, eFlagsReg cr) %{
7314 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval)));
7315 effect(KILL cr, KILL oldval);
7316 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
7317 "MOV $res,0\n\t"
7318 "JNE,s fail\n\t"
7319 "MOV $res,1\n"
7320 "fail:" %}
7321 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
7322 ins_pipe( pipe_cmpxchg );
7323 %}
7325 instruct xaddI_no_res( memory mem, Universe dummy, immI add, eFlagsReg cr) %{
7326 predicate(n->as_LoadStore()->result_not_used());
7327 match(Set dummy (GetAndAddI mem add));
7328 effect(KILL cr);
7329 format %{ "ADDL [$mem],$add" %}
7330 ins_encode %{
7331 if (os::is_MP()) { __ lock(); }
7332 __ addl($mem$$Address, $add$$constant);
7333 %}
7334 ins_pipe( pipe_cmpxchg );
7335 %}
7337 instruct xaddI( memory mem, rRegI newval, eFlagsReg cr) %{
7338 match(Set newval (GetAndAddI mem newval));
7339 effect(KILL cr);
7340 format %{ "XADDL [$mem],$newval" %}
7341 ins_encode %{
7342 if (os::is_MP()) { __ lock(); }
7343 __ xaddl($mem$$Address, $newval$$Register);
7344 %}
7345 ins_pipe( pipe_cmpxchg );
7346 %}
7348 instruct xchgI( memory mem, rRegI newval) %{
7349 match(Set newval (GetAndSetI mem newval));
7350 format %{ "XCHGL $newval,[$mem]" %}
7351 ins_encode %{
7352 __ xchgl($newval$$Register, $mem$$Address);
7353 %}
7354 ins_pipe( pipe_cmpxchg );
7355 %}
7357 instruct xchgP( memory mem, pRegP newval) %{
7358 match(Set newval (GetAndSetP mem newval));
7359 format %{ "XCHGL $newval,[$mem]" %}
7360 ins_encode %{
7361 __ xchgl($newval$$Register, $mem$$Address);
7362 %}
7363 ins_pipe( pipe_cmpxchg );
7364 %}
7366 //----------Subtraction Instructions-------------------------------------------
7368 // Integer Subtraction Instructions
7369 instruct subI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7370 match(Set dst (SubI dst src));
7371 effect(KILL cr);
7373 size(2);
7374 format %{ "SUB $dst,$src" %}
7375 opcode(0x2B);
7376 ins_encode( OpcP, RegReg( dst, src) );
7377 ins_pipe( ialu_reg_reg );
7378 %}
7380 instruct subI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
7381 match(Set dst (SubI dst src));
7382 effect(KILL cr);
7384 format %{ "SUB $dst,$src" %}
7385 opcode(0x81,0x05); /* Opcode 81 /5 */
7386 // ins_encode( RegImm( dst, src) );
7387 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
7388 ins_pipe( ialu_reg );
7389 %}
7391 instruct subI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
7392 match(Set dst (SubI dst (LoadI src)));
7393 effect(KILL cr);
7395 ins_cost(125);
7396 format %{ "SUB $dst,$src" %}
7397 opcode(0x2B);
7398 ins_encode( OpcP, RegMem( dst, src) );
7399 ins_pipe( ialu_reg_mem );
7400 %}
7402 instruct subI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
7403 match(Set dst (StoreI dst (SubI (LoadI dst) src)));
7404 effect(KILL cr);
7406 ins_cost(150);
7407 format %{ "SUB $dst,$src" %}
7408 opcode(0x29); /* Opcode 29 /r */
7409 ins_encode( OpcP, RegMem( src, dst ) );
7410 ins_pipe( ialu_mem_reg );
7411 %}
7413 // Subtract from a pointer
7414 instruct subP_eReg(eRegP dst, rRegI src, immI0 zero, eFlagsReg cr) %{
7415 match(Set dst (AddP dst (SubI zero src)));
7416 effect(KILL cr);
7418 size(2);
7419 format %{ "SUB $dst,$src" %}
7420 opcode(0x2B);
7421 ins_encode( OpcP, RegReg( dst, src) );
7422 ins_pipe( ialu_reg_reg );
7423 %}
7425 instruct negI_eReg(rRegI dst, immI0 zero, eFlagsReg cr) %{
7426 match(Set dst (SubI zero dst));
7427 effect(KILL cr);
7429 size(2);
7430 format %{ "NEG $dst" %}
7431 opcode(0xF7,0x03); // Opcode F7 /3
7432 ins_encode( OpcP, RegOpc( dst ) );
7433 ins_pipe( ialu_reg );
7434 %}
7436 //----------Multiplication/Division Instructions-------------------------------
7437 // Integer Multiplication Instructions
7438 // Multiply Register
7439 instruct mulI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
7440 match(Set dst (MulI dst src));
7441 effect(KILL cr);
7443 size(3);
7444 ins_cost(300);
7445 format %{ "IMUL $dst,$src" %}
7446 opcode(0xAF, 0x0F);
7447 ins_encode( OpcS, OpcP, RegReg( dst, src) );
7448 ins_pipe( ialu_reg_reg_alu0 );
7449 %}
7451 // Multiply 32-bit Immediate
7452 instruct mulI_eReg_imm(rRegI dst, rRegI src, immI imm, eFlagsReg cr) %{
7453 match(Set dst (MulI src imm));
7454 effect(KILL cr);
7456 ins_cost(300);
7457 format %{ "IMUL $dst,$src,$imm" %}
7458 opcode(0x69); /* 69 /r id */
7459 ins_encode( OpcSE(imm), RegReg( dst, src ), Con8or32( imm ) );
7460 ins_pipe( ialu_reg_reg_alu0 );
7461 %}
7463 instruct loadConL_low_only(eADXRegL_low_only dst, immL32 src, eFlagsReg cr) %{
7464 match(Set dst src);
7465 effect(KILL cr);
7467 // Note that this is artificially increased to make it more expensive than loadConL
7468 ins_cost(250);
7469 format %{ "MOV EAX,$src\t// low word only" %}
7470 opcode(0xB8);
7471 ins_encode( LdImmL_Lo(dst, src) );
7472 ins_pipe( ialu_reg_fat );
7473 %}
7475 // Multiply by 32-bit Immediate, taking the shifted high order results
7476 // (special case for shift by 32)
7477 instruct mulI_imm_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32 cnt, eFlagsReg cr) %{
7478 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
7479 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
7480 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
7481 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
7482 effect(USE src1, KILL cr);
7484 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
7485 ins_cost(0*100 + 1*400 - 150);
7486 format %{ "IMUL EDX:EAX,$src1" %}
7487 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
7488 ins_pipe( pipe_slow );
7489 %}
7491 // Multiply by 32-bit Immediate, taking the shifted high order results
7492 instruct mulI_imm_RShift_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr) %{
7493 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
7494 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
7495 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
7496 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
7497 effect(USE src1, KILL cr);
7499 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
7500 ins_cost(1*100 + 1*400 - 150);
7501 format %{ "IMUL EDX:EAX,$src1\n\t"
7502 "SAR EDX,$cnt-32" %}
7503 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
7504 ins_pipe( pipe_slow );
7505 %}
7507 // Multiply Memory 32-bit Immediate
7508 instruct mulI_mem_imm(rRegI dst, memory src, immI imm, eFlagsReg cr) %{
7509 match(Set dst (MulI (LoadI src) imm));
7510 effect(KILL cr);
7512 ins_cost(300);
7513 format %{ "IMUL $dst,$src,$imm" %}
7514 opcode(0x69); /* 69 /r id */
7515 ins_encode( OpcSE(imm), RegMem( dst, src ), Con8or32( imm ) );
7516 ins_pipe( ialu_reg_mem_alu0 );
7517 %}
7519 // Multiply Memory
7520 instruct mulI(rRegI dst, memory src, eFlagsReg cr) %{
7521 match(Set dst (MulI dst (LoadI src)));
7522 effect(KILL cr);
7524 ins_cost(350);
7525 format %{ "IMUL $dst,$src" %}
7526 opcode(0xAF, 0x0F);
7527 ins_encode( OpcS, OpcP, RegMem( dst, src) );
7528 ins_pipe( ialu_reg_mem_alu0 );
7529 %}
7531 // Multiply Register Int to Long
7532 instruct mulI2L(eADXRegL dst, eAXRegI src, nadxRegI src1, eFlagsReg flags) %{
7533 // Basic Idea: long = (long)int * (long)int
7534 match(Set dst (MulL (ConvI2L src) (ConvI2L src1)));
7535 effect(DEF dst, USE src, USE src1, KILL flags);
7537 ins_cost(300);
7538 format %{ "IMUL $dst,$src1" %}
7540 ins_encode( long_int_multiply( dst, src1 ) );
7541 ins_pipe( ialu_reg_reg_alu0 );
7542 %}
7544 instruct mulIS_eReg(eADXRegL dst, immL_32bits mask, eFlagsReg flags, eAXRegI src, nadxRegI src1) %{
7545 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
7546 match(Set dst (MulL (AndL (ConvI2L src) mask) (AndL (ConvI2L src1) mask)));
7547 effect(KILL flags);
7549 ins_cost(300);
7550 format %{ "MUL $dst,$src1" %}
7552 ins_encode( long_uint_multiply(dst, src1) );
7553 ins_pipe( ialu_reg_reg_alu0 );
7554 %}
7556 // Multiply Register Long
7557 instruct mulL_eReg(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
7558 match(Set dst (MulL dst src));
7559 effect(KILL cr, TEMP tmp);
7560 ins_cost(4*100+3*400);
7561 // Basic idea: lo(result) = lo(x_lo * y_lo)
7562 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
7563 format %{ "MOV $tmp,$src.lo\n\t"
7564 "IMUL $tmp,EDX\n\t"
7565 "MOV EDX,$src.hi\n\t"
7566 "IMUL EDX,EAX\n\t"
7567 "ADD $tmp,EDX\n\t"
7568 "MUL EDX:EAX,$src.lo\n\t"
7569 "ADD EDX,$tmp" %}
7570 ins_encode( long_multiply( dst, src, tmp ) );
7571 ins_pipe( pipe_slow );
7572 %}
7574 // Multiply Register Long where the left operand's high 32 bits are zero
7575 instruct mulL_eReg_lhi0(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
7576 predicate(is_operand_hi32_zero(n->in(1)));
7577 match(Set dst (MulL dst src));
7578 effect(KILL cr, TEMP tmp);
7579 ins_cost(2*100+2*400);
7580 // Basic idea: lo(result) = lo(x_lo * y_lo)
7581 // hi(result) = hi(x_lo * y_lo) + lo(x_lo * y_hi) where lo(x_hi * y_lo) = 0 because x_hi = 0
7582 format %{ "MOV $tmp,$src.hi\n\t"
7583 "IMUL $tmp,EAX\n\t"
7584 "MUL EDX:EAX,$src.lo\n\t"
7585 "ADD EDX,$tmp" %}
7586 ins_encode %{
7587 __ movl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
7588 __ imull($tmp$$Register, rax);
7589 __ mull($src$$Register);
7590 __ addl(rdx, $tmp$$Register);
7591 %}
7592 ins_pipe( pipe_slow );
7593 %}
7595 // Multiply Register Long where the right operand's high 32 bits are zero
7596 instruct mulL_eReg_rhi0(eADXRegL dst, eRegL src, rRegI tmp, eFlagsReg cr) %{
7597 predicate(is_operand_hi32_zero(n->in(2)));
7598 match(Set dst (MulL dst src));
7599 effect(KILL cr, TEMP tmp);
7600 ins_cost(2*100+2*400);
7601 // Basic idea: lo(result) = lo(x_lo * y_lo)
7602 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) where lo(x_lo * y_hi) = 0 because y_hi = 0
7603 format %{ "MOV $tmp,$src.lo\n\t"
7604 "IMUL $tmp,EDX\n\t"
7605 "MUL EDX:EAX,$src.lo\n\t"
7606 "ADD EDX,$tmp" %}
7607 ins_encode %{
7608 __ movl($tmp$$Register, $src$$Register);
7609 __ imull($tmp$$Register, rdx);
7610 __ mull($src$$Register);
7611 __ addl(rdx, $tmp$$Register);
7612 %}
7613 ins_pipe( pipe_slow );
7614 %}
7616 // Multiply Register Long where the left and the right operands' high 32 bits are zero
7617 instruct mulL_eReg_hi0(eADXRegL dst, eRegL src, eFlagsReg cr) %{
7618 predicate(is_operand_hi32_zero(n->in(1)) && is_operand_hi32_zero(n->in(2)));
7619 match(Set dst (MulL dst src));
7620 effect(KILL cr);
7621 ins_cost(1*400);
7622 // Basic idea: lo(result) = lo(x_lo * y_lo)
7623 // hi(result) = hi(x_lo * y_lo) where lo(x_hi * y_lo) = 0 and lo(x_lo * y_hi) = 0 because x_hi = 0 and y_hi = 0
7624 format %{ "MUL EDX:EAX,$src.lo\n\t" %}
7625 ins_encode %{
7626 __ mull($src$$Register);
7627 %}
7628 ins_pipe( pipe_slow );
7629 %}
7631 // Multiply Register Long by small constant
7632 instruct mulL_eReg_con(eADXRegL dst, immL_127 src, rRegI tmp, eFlagsReg cr) %{
7633 match(Set dst (MulL dst src));
7634 effect(KILL cr, TEMP tmp);
7635 ins_cost(2*100+2*400);
7636 size(12);
7637 // Basic idea: lo(result) = lo(src * EAX)
7638 // hi(result) = hi(src * EAX) + lo(src * EDX)
7639 format %{ "IMUL $tmp,EDX,$src\n\t"
7640 "MOV EDX,$src\n\t"
7641 "MUL EDX\t# EDX*EAX -> EDX:EAX\n\t"
7642 "ADD EDX,$tmp" %}
7643 ins_encode( long_multiply_con( dst, src, tmp ) );
7644 ins_pipe( pipe_slow );
7645 %}
7647 // Integer DIV with Register
7648 instruct divI_eReg(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
7649 match(Set rax (DivI rax div));
7650 effect(KILL rdx, KILL cr);
7651 size(26);
7652 ins_cost(30*100+10*100);
7653 format %{ "CMP EAX,0x80000000\n\t"
7654 "JNE,s normal\n\t"
7655 "XOR EDX,EDX\n\t"
7656 "CMP ECX,-1\n\t"
7657 "JE,s done\n"
7658 "normal: CDQ\n\t"
7659 "IDIV $div\n\t"
7660 "done:" %}
7661 opcode(0xF7, 0x7); /* Opcode F7 /7 */
7662 ins_encode( cdq_enc, OpcP, RegOpc(div) );
7663 ins_pipe( ialu_reg_reg_alu0 );
7664 %}
7666 // Divide Register Long
7667 instruct divL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
7668 match(Set dst (DivL src1 src2));
7669 effect( KILL cr, KILL cx, KILL bx );
7670 ins_cost(10000);
7671 format %{ "PUSH $src1.hi\n\t"
7672 "PUSH $src1.lo\n\t"
7673 "PUSH $src2.hi\n\t"
7674 "PUSH $src2.lo\n\t"
7675 "CALL SharedRuntime::ldiv\n\t"
7676 "ADD ESP,16" %}
7677 ins_encode( long_div(src1,src2) );
7678 ins_pipe( pipe_slow );
7679 %}
7681 // Integer DIVMOD with Register, both quotient and mod results
7682 instruct divModI_eReg_divmod(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
7683 match(DivModI rax div);
7684 effect(KILL cr);
7685 size(26);
7686 ins_cost(30*100+10*100);
7687 format %{ "CMP EAX,0x80000000\n\t"
7688 "JNE,s normal\n\t"
7689 "XOR EDX,EDX\n\t"
7690 "CMP ECX,-1\n\t"
7691 "JE,s done\n"
7692 "normal: CDQ\n\t"
7693 "IDIV $div\n\t"
7694 "done:" %}
7695 opcode(0xF7, 0x7); /* Opcode F7 /7 */
7696 ins_encode( cdq_enc, OpcP, RegOpc(div) );
7697 ins_pipe( pipe_slow );
7698 %}
7700 // Integer MOD with Register
7701 instruct modI_eReg(eDXRegI rdx, eAXRegI rax, eCXRegI div, eFlagsReg cr) %{
7702 match(Set rdx (ModI rax div));
7703 effect(KILL rax, KILL cr);
7705 size(26);
7706 ins_cost(300);
7707 format %{ "CDQ\n\t"
7708 "IDIV $div" %}
7709 opcode(0xF7, 0x7); /* Opcode F7 /7 */
7710 ins_encode( cdq_enc, OpcP, RegOpc(div) );
7711 ins_pipe( ialu_reg_reg_alu0 );
7712 %}
7714 // Remainder Register Long
7715 instruct modL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
7716 match(Set dst (ModL src1 src2));
7717 effect( KILL cr, KILL cx, KILL bx );
7718 ins_cost(10000);
7719 format %{ "PUSH $src1.hi\n\t"
7720 "PUSH $src1.lo\n\t"
7721 "PUSH $src2.hi\n\t"
7722 "PUSH $src2.lo\n\t"
7723 "CALL SharedRuntime::lrem\n\t"
7724 "ADD ESP,16" %}
7725 ins_encode( long_mod(src1,src2) );
7726 ins_pipe( pipe_slow );
7727 %}
7729 // Divide Register Long (no special case since divisor != -1)
7730 instruct divL_eReg_imm32( eADXRegL dst, immL32 imm, rRegI tmp, rRegI tmp2, eFlagsReg cr ) %{
7731 match(Set dst (DivL dst imm));
7732 effect( TEMP tmp, TEMP tmp2, KILL cr );
7733 ins_cost(1000);
7734 format %{ "MOV $tmp,abs($imm) # ldiv EDX:EAX,$imm\n\t"
7735 "XOR $tmp2,$tmp2\n\t"
7736 "CMP $tmp,EDX\n\t"
7737 "JA,s fast\n\t"
7738 "MOV $tmp2,EAX\n\t"
7739 "MOV EAX,EDX\n\t"
7740 "MOV EDX,0\n\t"
7741 "JLE,s pos\n\t"
7742 "LNEG EAX : $tmp2\n\t"
7743 "DIV $tmp # unsigned division\n\t"
7744 "XCHG EAX,$tmp2\n\t"
7745 "DIV $tmp\n\t"
7746 "LNEG $tmp2 : EAX\n\t"
7747 "JMP,s done\n"
7748 "pos:\n\t"
7749 "DIV $tmp\n\t"
7750 "XCHG EAX,$tmp2\n"
7751 "fast:\n\t"
7752 "DIV $tmp\n"
7753 "done:\n\t"
7754 "MOV EDX,$tmp2\n\t"
7755 "NEG EDX:EAX # if $imm < 0" %}
7756 ins_encode %{
7757 int con = (int)$imm$$constant;
7758 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
7759 int pcon = (con > 0) ? con : -con;
7760 Label Lfast, Lpos, Ldone;
7762 __ movl($tmp$$Register, pcon);
7763 __ xorl($tmp2$$Register,$tmp2$$Register);
7764 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
7765 __ jccb(Assembler::above, Lfast); // result fits into 32 bit
7767 __ movl($tmp2$$Register, $dst$$Register); // save
7768 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
7769 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
7770 __ jccb(Assembler::lessEqual, Lpos); // result is positive
7772 // Negative dividend.
7773 // convert value to positive to use unsigned division
7774 __ lneg($dst$$Register, $tmp2$$Register);
7775 __ divl($tmp$$Register);
7776 __ xchgl($dst$$Register, $tmp2$$Register);
7777 __ divl($tmp$$Register);
7778 // revert result back to negative
7779 __ lneg($tmp2$$Register, $dst$$Register);
7780 __ jmpb(Ldone);
7782 __ bind(Lpos);
7783 __ divl($tmp$$Register); // Use unsigned division
7784 __ xchgl($dst$$Register, $tmp2$$Register);
7785 // Fallthrow for final divide, tmp2 has 32 bit hi result
7787 __ bind(Lfast);
7788 // fast path: src is positive
7789 __ divl($tmp$$Register); // Use unsigned division
7791 __ bind(Ldone);
7792 __ movl(HIGH_FROM_LOW($dst$$Register),$tmp2$$Register);
7793 if (con < 0) {
7794 __ lneg(HIGH_FROM_LOW($dst$$Register), $dst$$Register);
7795 }
7796 %}
7797 ins_pipe( pipe_slow );
7798 %}
7800 // Remainder Register Long (remainder fit into 32 bits)
7801 instruct modL_eReg_imm32( eADXRegL dst, immL32 imm, rRegI tmp, rRegI tmp2, eFlagsReg cr ) %{
7802 match(Set dst (ModL dst imm));
7803 effect( TEMP tmp, TEMP tmp2, KILL cr );
7804 ins_cost(1000);
7805 format %{ "MOV $tmp,abs($imm) # lrem EDX:EAX,$imm\n\t"
7806 "CMP $tmp,EDX\n\t"
7807 "JA,s fast\n\t"
7808 "MOV $tmp2,EAX\n\t"
7809 "MOV EAX,EDX\n\t"
7810 "MOV EDX,0\n\t"
7811 "JLE,s pos\n\t"
7812 "LNEG EAX : $tmp2\n\t"
7813 "DIV $tmp # unsigned division\n\t"
7814 "MOV EAX,$tmp2\n\t"
7815 "DIV $tmp\n\t"
7816 "NEG EDX\n\t"
7817 "JMP,s done\n"
7818 "pos:\n\t"
7819 "DIV $tmp\n\t"
7820 "MOV EAX,$tmp2\n"
7821 "fast:\n\t"
7822 "DIV $tmp\n"
7823 "done:\n\t"
7824 "MOV EAX,EDX\n\t"
7825 "SAR EDX,31\n\t" %}
7826 ins_encode %{
7827 int con = (int)$imm$$constant;
7828 assert(con != 0 && con != -1 && con != min_jint, "wrong divisor");
7829 int pcon = (con > 0) ? con : -con;
7830 Label Lfast, Lpos, Ldone;
7832 __ movl($tmp$$Register, pcon);
7833 __ cmpl($tmp$$Register, HIGH_FROM_LOW($dst$$Register));
7834 __ jccb(Assembler::above, Lfast); // src is positive and result fits into 32 bit
7836 __ movl($tmp2$$Register, $dst$$Register); // save
7837 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
7838 __ movl(HIGH_FROM_LOW($dst$$Register),0); // preserve flags
7839 __ jccb(Assembler::lessEqual, Lpos); // result is positive
7841 // Negative dividend.
7842 // convert value to positive to use unsigned division
7843 __ lneg($dst$$Register, $tmp2$$Register);
7844 __ divl($tmp$$Register);
7845 __ movl($dst$$Register, $tmp2$$Register);
7846 __ divl($tmp$$Register);
7847 // revert remainder back to negative
7848 __ negl(HIGH_FROM_LOW($dst$$Register));
7849 __ jmpb(Ldone);
7851 __ bind(Lpos);
7852 __ divl($tmp$$Register);
7853 __ movl($dst$$Register, $tmp2$$Register);
7855 __ bind(Lfast);
7856 // fast path: src is positive
7857 __ divl($tmp$$Register);
7859 __ bind(Ldone);
7860 __ movl($dst$$Register, HIGH_FROM_LOW($dst$$Register));
7861 __ sarl(HIGH_FROM_LOW($dst$$Register), 31); // result sign
7863 %}
7864 ins_pipe( pipe_slow );
7865 %}
7867 // Integer Shift Instructions
7868 // Shift Left by one
7869 instruct shlI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
7870 match(Set dst (LShiftI dst shift));
7871 effect(KILL cr);
7873 size(2);
7874 format %{ "SHL $dst,$shift" %}
7875 opcode(0xD1, 0x4); /* D1 /4 */
7876 ins_encode( OpcP, RegOpc( dst ) );
7877 ins_pipe( ialu_reg );
7878 %}
7880 // Shift Left by 8-bit immediate
7881 instruct salI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
7882 match(Set dst (LShiftI dst shift));
7883 effect(KILL cr);
7885 size(3);
7886 format %{ "SHL $dst,$shift" %}
7887 opcode(0xC1, 0x4); /* C1 /4 ib */
7888 ins_encode( RegOpcImm( dst, shift) );
7889 ins_pipe( ialu_reg );
7890 %}
7892 // Shift Left by variable
7893 instruct salI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
7894 match(Set dst (LShiftI dst shift));
7895 effect(KILL cr);
7897 size(2);
7898 format %{ "SHL $dst,$shift" %}
7899 opcode(0xD3, 0x4); /* D3 /4 */
7900 ins_encode( OpcP, RegOpc( dst ) );
7901 ins_pipe( ialu_reg_reg );
7902 %}
7904 // Arithmetic shift right by one
7905 instruct sarI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
7906 match(Set dst (RShiftI dst shift));
7907 effect(KILL cr);
7909 size(2);
7910 format %{ "SAR $dst,$shift" %}
7911 opcode(0xD1, 0x7); /* D1 /7 */
7912 ins_encode( OpcP, RegOpc( dst ) );
7913 ins_pipe( ialu_reg );
7914 %}
7916 // Arithmetic shift right by one
7917 instruct sarI_mem_1(memory dst, immI1 shift, eFlagsReg cr) %{
7918 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
7919 effect(KILL cr);
7920 format %{ "SAR $dst,$shift" %}
7921 opcode(0xD1, 0x7); /* D1 /7 */
7922 ins_encode( OpcP, RMopc_Mem(secondary,dst) );
7923 ins_pipe( ialu_mem_imm );
7924 %}
7926 // Arithmetic Shift Right by 8-bit immediate
7927 instruct sarI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
7928 match(Set dst (RShiftI dst shift));
7929 effect(KILL cr);
7931 size(3);
7932 format %{ "SAR $dst,$shift" %}
7933 opcode(0xC1, 0x7); /* C1 /7 ib */
7934 ins_encode( RegOpcImm( dst, shift ) );
7935 ins_pipe( ialu_mem_imm );
7936 %}
7938 // Arithmetic Shift Right by 8-bit immediate
7939 instruct sarI_mem_imm(memory dst, immI8 shift, eFlagsReg cr) %{
7940 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
7941 effect(KILL cr);
7943 format %{ "SAR $dst,$shift" %}
7944 opcode(0xC1, 0x7); /* C1 /7 ib */
7945 ins_encode( OpcP, RMopc_Mem(secondary, dst ), Con8or32( shift ) );
7946 ins_pipe( ialu_mem_imm );
7947 %}
7949 // Arithmetic Shift Right by variable
7950 instruct sarI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
7951 match(Set dst (RShiftI dst shift));
7952 effect(KILL cr);
7954 size(2);
7955 format %{ "SAR $dst,$shift" %}
7956 opcode(0xD3, 0x7); /* D3 /7 */
7957 ins_encode( OpcP, RegOpc( dst ) );
7958 ins_pipe( ialu_reg_reg );
7959 %}
7961 // Logical shift right by one
7962 instruct shrI_eReg_1(rRegI dst, immI1 shift, eFlagsReg cr) %{
7963 match(Set dst (URShiftI dst shift));
7964 effect(KILL cr);
7966 size(2);
7967 format %{ "SHR $dst,$shift" %}
7968 opcode(0xD1, 0x5); /* D1 /5 */
7969 ins_encode( OpcP, RegOpc( dst ) );
7970 ins_pipe( ialu_reg );
7971 %}
7973 // Logical Shift Right by 8-bit immediate
7974 instruct shrI_eReg_imm(rRegI dst, immI8 shift, eFlagsReg cr) %{
7975 match(Set dst (URShiftI dst shift));
7976 effect(KILL cr);
7978 size(3);
7979 format %{ "SHR $dst,$shift" %}
7980 opcode(0xC1, 0x5); /* C1 /5 ib */
7981 ins_encode( RegOpcImm( dst, shift) );
7982 ins_pipe( ialu_reg );
7983 %}
7986 // Logical Shift Right by 24, followed by Arithmetic Shift Left by 24.
7987 // This idiom is used by the compiler for the i2b bytecode.
7988 instruct i2b(rRegI dst, xRegI src, immI_24 twentyfour) %{
7989 match(Set dst (RShiftI (LShiftI src twentyfour) twentyfour));
7991 size(3);
7992 format %{ "MOVSX $dst,$src :8" %}
7993 ins_encode %{
7994 __ movsbl($dst$$Register, $src$$Register);
7995 %}
7996 ins_pipe(ialu_reg_reg);
7997 %}
7999 // Logical Shift Right by 16, followed by Arithmetic Shift Left by 16.
8000 // This idiom is used by the compiler the i2s bytecode.
8001 instruct i2s(rRegI dst, xRegI src, immI_16 sixteen) %{
8002 match(Set dst (RShiftI (LShiftI src sixteen) sixteen));
8004 size(3);
8005 format %{ "MOVSX $dst,$src :16" %}
8006 ins_encode %{
8007 __ movswl($dst$$Register, $src$$Register);
8008 %}
8009 ins_pipe(ialu_reg_reg);
8010 %}
8013 // Logical Shift Right by variable
8014 instruct shrI_eReg_CL(rRegI dst, eCXRegI shift, eFlagsReg cr) %{
8015 match(Set dst (URShiftI dst shift));
8016 effect(KILL cr);
8018 size(2);
8019 format %{ "SHR $dst,$shift" %}
8020 opcode(0xD3, 0x5); /* D3 /5 */
8021 ins_encode( OpcP, RegOpc( dst ) );
8022 ins_pipe( ialu_reg_reg );
8023 %}
8026 //----------Logical Instructions-----------------------------------------------
8027 //----------Integer Logical Instructions---------------------------------------
8028 // And Instructions
8029 // And Register with Register
8030 instruct andI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8031 match(Set dst (AndI dst src));
8032 effect(KILL cr);
8034 size(2);
8035 format %{ "AND $dst,$src" %}
8036 opcode(0x23);
8037 ins_encode( OpcP, RegReg( dst, src) );
8038 ins_pipe( ialu_reg_reg );
8039 %}
8041 // And Register with Immediate
8042 instruct andI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8043 match(Set dst (AndI dst src));
8044 effect(KILL cr);
8046 format %{ "AND $dst,$src" %}
8047 opcode(0x81,0x04); /* Opcode 81 /4 */
8048 // ins_encode( RegImm( dst, src) );
8049 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8050 ins_pipe( ialu_reg );
8051 %}
8053 // And Register with Memory
8054 instruct andI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8055 match(Set dst (AndI dst (LoadI src)));
8056 effect(KILL cr);
8058 ins_cost(125);
8059 format %{ "AND $dst,$src" %}
8060 opcode(0x23);
8061 ins_encode( OpcP, RegMem( dst, src) );
8062 ins_pipe( ialu_reg_mem );
8063 %}
8065 // And Memory with Register
8066 instruct andI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8067 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
8068 effect(KILL cr);
8070 ins_cost(150);
8071 format %{ "AND $dst,$src" %}
8072 opcode(0x21); /* Opcode 21 /r */
8073 ins_encode( OpcP, RegMem( src, dst ) );
8074 ins_pipe( ialu_mem_reg );
8075 %}
8077 // And Memory with Immediate
8078 instruct andI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8079 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
8080 effect(KILL cr);
8082 ins_cost(125);
8083 format %{ "AND $dst,$src" %}
8084 opcode(0x81, 0x4); /* Opcode 81 /4 id */
8085 // ins_encode( MemImm( dst, src) );
8086 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8087 ins_pipe( ialu_mem_imm );
8088 %}
8090 // BMI1 instructions
8091 instruct andnI_rReg_rReg_rReg(rRegI dst, rRegI src1, rRegI src2, immI_M1 minus_1, eFlagsReg cr) %{
8092 match(Set dst (AndI (XorI src1 minus_1) src2));
8093 predicate(UseBMI1Instructions);
8094 effect(KILL cr);
8096 format %{ "ANDNL $dst, $src1, $src2" %}
8098 ins_encode %{
8099 __ andnl($dst$$Register, $src1$$Register, $src2$$Register);
8100 %}
8101 ins_pipe(ialu_reg);
8102 %}
8104 instruct andnI_rReg_rReg_mem(rRegI dst, rRegI src1, memory src2, immI_M1 minus_1, eFlagsReg cr) %{
8105 match(Set dst (AndI (XorI src1 minus_1) (LoadI src2) ));
8106 predicate(UseBMI1Instructions);
8107 effect(KILL cr);
8109 ins_cost(125);
8110 format %{ "ANDNL $dst, $src1, $src2" %}
8112 ins_encode %{
8113 __ andnl($dst$$Register, $src1$$Register, $src2$$Address);
8114 %}
8115 ins_pipe(ialu_reg_mem);
8116 %}
8118 instruct blsiI_rReg_rReg(rRegI dst, rRegI src, immI0 imm_zero, eFlagsReg cr) %{
8119 match(Set dst (AndI (SubI imm_zero src) src));
8120 predicate(UseBMI1Instructions);
8121 effect(KILL cr);
8123 format %{ "BLSIL $dst, $src" %}
8125 ins_encode %{
8126 __ blsil($dst$$Register, $src$$Register);
8127 %}
8128 ins_pipe(ialu_reg);
8129 %}
8131 instruct blsiI_rReg_mem(rRegI dst, memory src, immI0 imm_zero, eFlagsReg cr) %{
8132 match(Set dst (AndI (SubI imm_zero (LoadI src) ) (LoadI src) ));
8133 predicate(UseBMI1Instructions);
8134 effect(KILL cr);
8136 ins_cost(125);
8137 format %{ "BLSIL $dst, $src" %}
8139 ins_encode %{
8140 __ blsil($dst$$Register, $src$$Address);
8141 %}
8142 ins_pipe(ialu_reg_mem);
8143 %}
8145 instruct blsmskI_rReg_rReg(rRegI dst, rRegI src, immI_M1 minus_1, eFlagsReg cr)
8146 %{
8147 match(Set dst (XorI (AddI src minus_1) src));
8148 predicate(UseBMI1Instructions);
8149 effect(KILL cr);
8151 format %{ "BLSMSKL $dst, $src" %}
8153 ins_encode %{
8154 __ blsmskl($dst$$Register, $src$$Register);
8155 %}
8157 ins_pipe(ialu_reg);
8158 %}
8160 instruct blsmskI_rReg_mem(rRegI dst, memory src, immI_M1 minus_1, eFlagsReg cr)
8161 %{
8162 match(Set dst (XorI (AddI (LoadI src) minus_1) (LoadI src) ));
8163 predicate(UseBMI1Instructions);
8164 effect(KILL cr);
8166 ins_cost(125);
8167 format %{ "BLSMSKL $dst, $src" %}
8169 ins_encode %{
8170 __ blsmskl($dst$$Register, $src$$Address);
8171 %}
8173 ins_pipe(ialu_reg_mem);
8174 %}
8176 instruct blsrI_rReg_rReg(rRegI dst, rRegI src, immI_M1 minus_1, eFlagsReg cr)
8177 %{
8178 match(Set dst (AndI (AddI src minus_1) src) );
8179 predicate(UseBMI1Instructions);
8180 effect(KILL cr);
8182 format %{ "BLSRL $dst, $src" %}
8184 ins_encode %{
8185 __ blsrl($dst$$Register, $src$$Register);
8186 %}
8188 ins_pipe(ialu_reg);
8189 %}
8191 instruct blsrI_rReg_mem(rRegI dst, memory src, immI_M1 minus_1, eFlagsReg cr)
8192 %{
8193 match(Set dst (AndI (AddI (LoadI src) minus_1) (LoadI src) ));
8194 predicate(UseBMI1Instructions);
8195 effect(KILL cr);
8197 ins_cost(125);
8198 format %{ "BLSRL $dst, $src" %}
8200 ins_encode %{
8201 __ blsrl($dst$$Register, $src$$Address);
8202 %}
8204 ins_pipe(ialu_reg_mem);
8205 %}
8207 // Or Instructions
8208 // Or Register with Register
8209 instruct orI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8210 match(Set dst (OrI dst src));
8211 effect(KILL cr);
8213 size(2);
8214 format %{ "OR $dst,$src" %}
8215 opcode(0x0B);
8216 ins_encode( OpcP, RegReg( dst, src) );
8217 ins_pipe( ialu_reg_reg );
8218 %}
8220 instruct orI_eReg_castP2X(rRegI dst, eRegP src, eFlagsReg cr) %{
8221 match(Set dst (OrI dst (CastP2X src)));
8222 effect(KILL cr);
8224 size(2);
8225 format %{ "OR $dst,$src" %}
8226 opcode(0x0B);
8227 ins_encode( OpcP, RegReg( dst, src) );
8228 ins_pipe( ialu_reg_reg );
8229 %}
8232 // Or Register with Immediate
8233 instruct orI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8234 match(Set dst (OrI dst src));
8235 effect(KILL cr);
8237 format %{ "OR $dst,$src" %}
8238 opcode(0x81,0x01); /* Opcode 81 /1 id */
8239 // ins_encode( RegImm( dst, src) );
8240 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8241 ins_pipe( ialu_reg );
8242 %}
8244 // Or Register with Memory
8245 instruct orI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8246 match(Set dst (OrI dst (LoadI src)));
8247 effect(KILL cr);
8249 ins_cost(125);
8250 format %{ "OR $dst,$src" %}
8251 opcode(0x0B);
8252 ins_encode( OpcP, RegMem( dst, src) );
8253 ins_pipe( ialu_reg_mem );
8254 %}
8256 // Or Memory with Register
8257 instruct orI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8258 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
8259 effect(KILL cr);
8261 ins_cost(150);
8262 format %{ "OR $dst,$src" %}
8263 opcode(0x09); /* Opcode 09 /r */
8264 ins_encode( OpcP, RegMem( src, dst ) );
8265 ins_pipe( ialu_mem_reg );
8266 %}
8268 // Or Memory with Immediate
8269 instruct orI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8270 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
8271 effect(KILL cr);
8273 ins_cost(125);
8274 format %{ "OR $dst,$src" %}
8275 opcode(0x81,0x1); /* Opcode 81 /1 id */
8276 // ins_encode( MemImm( dst, src) );
8277 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8278 ins_pipe( ialu_mem_imm );
8279 %}
8281 // ROL/ROR
8282 // ROL expand
8283 instruct rolI_eReg_imm1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8284 effect(USE_DEF dst, USE shift, KILL cr);
8286 format %{ "ROL $dst, $shift" %}
8287 opcode(0xD1, 0x0); /* Opcode D1 /0 */
8288 ins_encode( OpcP, RegOpc( dst ));
8289 ins_pipe( ialu_reg );
8290 %}
8292 instruct rolI_eReg_imm8(rRegI dst, immI8 shift, eFlagsReg cr) %{
8293 effect(USE_DEF dst, USE shift, KILL cr);
8295 format %{ "ROL $dst, $shift" %}
8296 opcode(0xC1, 0x0); /*Opcode /C1 /0 */
8297 ins_encode( RegOpcImm(dst, shift) );
8298 ins_pipe(ialu_reg);
8299 %}
8301 instruct rolI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr) %{
8302 effect(USE_DEF dst, USE shift, KILL cr);
8304 format %{ "ROL $dst, $shift" %}
8305 opcode(0xD3, 0x0); /* Opcode D3 /0 */
8306 ins_encode(OpcP, RegOpc(dst));
8307 ins_pipe( ialu_reg_reg );
8308 %}
8309 // end of ROL expand
8311 // ROL 32bit by one once
8312 instruct rolI_eReg_i1(rRegI dst, immI1 lshift, immI_M1 rshift, eFlagsReg cr) %{
8313 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
8315 expand %{
8316 rolI_eReg_imm1(dst, lshift, cr);
8317 %}
8318 %}
8320 // ROL 32bit var by imm8 once
8321 instruct rolI_eReg_i8(rRegI dst, immI8 lshift, immI8 rshift, eFlagsReg cr) %{
8322 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
8323 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
8325 expand %{
8326 rolI_eReg_imm8(dst, lshift, cr);
8327 %}
8328 %}
8330 // ROL 32bit var by var once
8331 instruct rolI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
8332 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI zero shift))));
8334 expand %{
8335 rolI_eReg_CL(dst, shift, cr);
8336 %}
8337 %}
8339 // ROL 32bit var by var once
8340 instruct rolI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
8341 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI c32 shift))));
8343 expand %{
8344 rolI_eReg_CL(dst, shift, cr);
8345 %}
8346 %}
8348 // ROR expand
8349 instruct rorI_eReg_imm1(rRegI dst, immI1 shift, eFlagsReg cr) %{
8350 effect(USE_DEF dst, USE shift, KILL cr);
8352 format %{ "ROR $dst, $shift" %}
8353 opcode(0xD1,0x1); /* Opcode D1 /1 */
8354 ins_encode( OpcP, RegOpc( dst ) );
8355 ins_pipe( ialu_reg );
8356 %}
8358 instruct rorI_eReg_imm8(rRegI dst, immI8 shift, eFlagsReg cr) %{
8359 effect (USE_DEF dst, USE shift, KILL cr);
8361 format %{ "ROR $dst, $shift" %}
8362 opcode(0xC1, 0x1); /* Opcode /C1 /1 ib */
8363 ins_encode( RegOpcImm(dst, shift) );
8364 ins_pipe( ialu_reg );
8365 %}
8367 instruct rorI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr)%{
8368 effect(USE_DEF dst, USE shift, KILL cr);
8370 format %{ "ROR $dst, $shift" %}
8371 opcode(0xD3, 0x1); /* Opcode D3 /1 */
8372 ins_encode(OpcP, RegOpc(dst));
8373 ins_pipe( ialu_reg_reg );
8374 %}
8375 // end of ROR expand
8377 // ROR right once
8378 instruct rorI_eReg_i1(rRegI dst, immI1 rshift, immI_M1 lshift, eFlagsReg cr) %{
8379 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
8381 expand %{
8382 rorI_eReg_imm1(dst, rshift, cr);
8383 %}
8384 %}
8386 // ROR 32bit by immI8 once
8387 instruct rorI_eReg_i8(rRegI dst, immI8 rshift, immI8 lshift, eFlagsReg cr) %{
8388 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
8389 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
8391 expand %{
8392 rorI_eReg_imm8(dst, rshift, cr);
8393 %}
8394 %}
8396 // ROR 32bit var by var once
8397 instruct rorI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
8398 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI zero shift))));
8400 expand %{
8401 rorI_eReg_CL(dst, shift, cr);
8402 %}
8403 %}
8405 // ROR 32bit var by var once
8406 instruct rorI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
8407 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI c32 shift))));
8409 expand %{
8410 rorI_eReg_CL(dst, shift, cr);
8411 %}
8412 %}
8414 // Xor Instructions
8415 // Xor Register with Register
8416 instruct xorI_eReg(rRegI dst, rRegI src, eFlagsReg cr) %{
8417 match(Set dst (XorI dst src));
8418 effect(KILL cr);
8420 size(2);
8421 format %{ "XOR $dst,$src" %}
8422 opcode(0x33);
8423 ins_encode( OpcP, RegReg( dst, src) );
8424 ins_pipe( ialu_reg_reg );
8425 %}
8427 // Xor Register with Immediate -1
8428 instruct xorI_eReg_im1(rRegI dst, immI_M1 imm) %{
8429 match(Set dst (XorI dst imm));
8431 size(2);
8432 format %{ "NOT $dst" %}
8433 ins_encode %{
8434 __ notl($dst$$Register);
8435 %}
8436 ins_pipe( ialu_reg );
8437 %}
8439 // Xor Register with Immediate
8440 instruct xorI_eReg_imm(rRegI dst, immI src, eFlagsReg cr) %{
8441 match(Set dst (XorI dst src));
8442 effect(KILL cr);
8444 format %{ "XOR $dst,$src" %}
8445 opcode(0x81,0x06); /* Opcode 81 /6 id */
8446 // ins_encode( RegImm( dst, src) );
8447 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8448 ins_pipe( ialu_reg );
8449 %}
8451 // Xor Register with Memory
8452 instruct xorI_eReg_mem(rRegI dst, memory src, eFlagsReg cr) %{
8453 match(Set dst (XorI dst (LoadI src)));
8454 effect(KILL cr);
8456 ins_cost(125);
8457 format %{ "XOR $dst,$src" %}
8458 opcode(0x33);
8459 ins_encode( OpcP, RegMem(dst, src) );
8460 ins_pipe( ialu_reg_mem );
8461 %}
8463 // Xor Memory with Register
8464 instruct xorI_mem_eReg(memory dst, rRegI src, eFlagsReg cr) %{
8465 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
8466 effect(KILL cr);
8468 ins_cost(150);
8469 format %{ "XOR $dst,$src" %}
8470 opcode(0x31); /* Opcode 31 /r */
8471 ins_encode( OpcP, RegMem( src, dst ) );
8472 ins_pipe( ialu_mem_reg );
8473 %}
8475 // Xor Memory with Immediate
8476 instruct xorI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8477 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
8478 effect(KILL cr);
8480 ins_cost(125);
8481 format %{ "XOR $dst,$src" %}
8482 opcode(0x81,0x6); /* Opcode 81 /6 id */
8483 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
8484 ins_pipe( ialu_mem_imm );
8485 %}
8487 //----------Convert Int to Boolean---------------------------------------------
8489 instruct movI_nocopy(rRegI dst, rRegI src) %{
8490 effect( DEF dst, USE src );
8491 format %{ "MOV $dst,$src" %}
8492 ins_encode( enc_Copy( dst, src) );
8493 ins_pipe( ialu_reg_reg );
8494 %}
8496 instruct ci2b( rRegI dst, rRegI src, eFlagsReg cr ) %{
8497 effect( USE_DEF dst, USE src, KILL cr );
8499 size(4);
8500 format %{ "NEG $dst\n\t"
8501 "ADC $dst,$src" %}
8502 ins_encode( neg_reg(dst),
8503 OpcRegReg(0x13,dst,src) );
8504 ins_pipe( ialu_reg_reg_long );
8505 %}
8507 instruct convI2B( rRegI dst, rRegI src, eFlagsReg cr ) %{
8508 match(Set dst (Conv2B src));
8510 expand %{
8511 movI_nocopy(dst,src);
8512 ci2b(dst,src,cr);
8513 %}
8514 %}
8516 instruct movP_nocopy(rRegI dst, eRegP src) %{
8517 effect( DEF dst, USE src );
8518 format %{ "MOV $dst,$src" %}
8519 ins_encode( enc_Copy( dst, src) );
8520 ins_pipe( ialu_reg_reg );
8521 %}
8523 instruct cp2b( rRegI dst, eRegP src, eFlagsReg cr ) %{
8524 effect( USE_DEF dst, USE src, KILL cr );
8525 format %{ "NEG $dst\n\t"
8526 "ADC $dst,$src" %}
8527 ins_encode( neg_reg(dst),
8528 OpcRegReg(0x13,dst,src) );
8529 ins_pipe( ialu_reg_reg_long );
8530 %}
8532 instruct convP2B( rRegI dst, eRegP src, eFlagsReg cr ) %{
8533 match(Set dst (Conv2B src));
8535 expand %{
8536 movP_nocopy(dst,src);
8537 cp2b(dst,src,cr);
8538 %}
8539 %}
8541 instruct cmpLTMask(eCXRegI dst, ncxRegI p, ncxRegI q, eFlagsReg cr) %{
8542 match(Set dst (CmpLTMask p q));
8543 effect(KILL cr);
8544 ins_cost(400);
8546 // SETlt can only use low byte of EAX,EBX, ECX, or EDX as destination
8547 format %{ "XOR $dst,$dst\n\t"
8548 "CMP $p,$q\n\t"
8549 "SETlt $dst\n\t"
8550 "NEG $dst" %}
8551 ins_encode %{
8552 Register Rp = $p$$Register;
8553 Register Rq = $q$$Register;
8554 Register Rd = $dst$$Register;
8555 Label done;
8556 __ xorl(Rd, Rd);
8557 __ cmpl(Rp, Rq);
8558 __ setb(Assembler::less, Rd);
8559 __ negl(Rd);
8560 %}
8562 ins_pipe(pipe_slow);
8563 %}
8565 instruct cmpLTMask0(rRegI dst, immI0 zero, eFlagsReg cr) %{
8566 match(Set dst (CmpLTMask dst zero));
8567 effect(DEF dst, KILL cr);
8568 ins_cost(100);
8570 format %{ "SAR $dst,31\t# cmpLTMask0" %}
8571 ins_encode %{
8572 __ sarl($dst$$Register, 31);
8573 %}
8574 ins_pipe(ialu_reg);
8575 %}
8577 /* better to save a register than avoid a branch */
8578 instruct cadd_cmpLTMask(rRegI p, rRegI q, rRegI y, eFlagsReg cr) %{
8579 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q)));
8580 effect(KILL cr);
8581 ins_cost(400);
8582 format %{ "SUB $p,$q\t# cadd_cmpLTMask\n\t"
8583 "JGE done\n\t"
8584 "ADD $p,$y\n"
8585 "done: " %}
8586 ins_encode %{
8587 Register Rp = $p$$Register;
8588 Register Rq = $q$$Register;
8589 Register Ry = $y$$Register;
8590 Label done;
8591 __ subl(Rp, Rq);
8592 __ jccb(Assembler::greaterEqual, done);
8593 __ addl(Rp, Ry);
8594 __ bind(done);
8595 %}
8597 ins_pipe(pipe_cmplt);
8598 %}
8600 /* better to save a register than avoid a branch */
8601 instruct and_cmpLTMask(rRegI p, rRegI q, rRegI y, eFlagsReg cr) %{
8602 match(Set y (AndI (CmpLTMask p q) y));
8603 effect(KILL cr);
8605 ins_cost(300);
8607 format %{ "CMPL $p, $q\t# and_cmpLTMask\n\t"
8608 "JLT done\n\t"
8609 "XORL $y, $y\n"
8610 "done: " %}
8611 ins_encode %{
8612 Register Rp = $p$$Register;
8613 Register Rq = $q$$Register;
8614 Register Ry = $y$$Register;
8615 Label done;
8616 __ cmpl(Rp, Rq);
8617 __ jccb(Assembler::less, done);
8618 __ xorl(Ry, Ry);
8619 __ bind(done);
8620 %}
8622 ins_pipe(pipe_cmplt);
8623 %}
8625 /* If I enable this, I encourage spilling in the inner loop of compress.
8626 instruct cadd_cmpLTMask_mem(ncxRegI p, ncxRegI q, memory y, eCXRegI tmp, eFlagsReg cr) %{
8627 match(Set p (AddI (AndI (CmpLTMask p q) (LoadI y)) (SubI p q)));
8628 */
8629 //----------Overflow Math Instructions-----------------------------------------
8631 instruct overflowAddI_eReg(eFlagsReg cr, eAXRegI op1, rRegI op2)
8632 %{
8633 match(Set cr (OverflowAddI op1 op2));
8634 effect(DEF cr, USE_KILL op1, USE op2);
8636 format %{ "ADD $op1, $op2\t# overflow check int" %}
8638 ins_encode %{
8639 __ addl($op1$$Register, $op2$$Register);
8640 %}
8641 ins_pipe(ialu_reg_reg);
8642 %}
8644 instruct overflowAddI_rReg_imm(eFlagsReg cr, eAXRegI op1, immI op2)
8645 %{
8646 match(Set cr (OverflowAddI op1 op2));
8647 effect(DEF cr, USE_KILL op1, USE op2);
8649 format %{ "ADD $op1, $op2\t# overflow check int" %}
8651 ins_encode %{
8652 __ addl($op1$$Register, $op2$$constant);
8653 %}
8654 ins_pipe(ialu_reg_reg);
8655 %}
8657 instruct overflowSubI_rReg(eFlagsReg cr, rRegI op1, rRegI op2)
8658 %{
8659 match(Set cr (OverflowSubI op1 op2));
8661 format %{ "CMP $op1, $op2\t# overflow check int" %}
8662 ins_encode %{
8663 __ cmpl($op1$$Register, $op2$$Register);
8664 %}
8665 ins_pipe(ialu_reg_reg);
8666 %}
8668 instruct overflowSubI_rReg_imm(eFlagsReg cr, rRegI op1, immI op2)
8669 %{
8670 match(Set cr (OverflowSubI op1 op2));
8672 format %{ "CMP $op1, $op2\t# overflow check int" %}
8673 ins_encode %{
8674 __ cmpl($op1$$Register, $op2$$constant);
8675 %}
8676 ins_pipe(ialu_reg_reg);
8677 %}
8679 instruct overflowNegI_rReg(eFlagsReg cr, immI0 zero, eAXRegI op2)
8680 %{
8681 match(Set cr (OverflowSubI zero op2));
8682 effect(DEF cr, USE_KILL op2);
8684 format %{ "NEG $op2\t# overflow check int" %}
8685 ins_encode %{
8686 __ negl($op2$$Register);
8687 %}
8688 ins_pipe(ialu_reg_reg);
8689 %}
8691 instruct overflowMulI_rReg(eFlagsReg cr, eAXRegI op1, rRegI op2)
8692 %{
8693 match(Set cr (OverflowMulI op1 op2));
8694 effect(DEF cr, USE_KILL op1, USE op2);
8696 format %{ "IMUL $op1, $op2\t# overflow check int" %}
8697 ins_encode %{
8698 __ imull($op1$$Register, $op2$$Register);
8699 %}
8700 ins_pipe(ialu_reg_reg_alu0);
8701 %}
8703 instruct overflowMulI_rReg_imm(eFlagsReg cr, rRegI op1, immI op2, rRegI tmp)
8704 %{
8705 match(Set cr (OverflowMulI op1 op2));
8706 effect(DEF cr, TEMP tmp, USE op1, USE op2);
8708 format %{ "IMUL $tmp, $op1, $op2\t# overflow check int" %}
8709 ins_encode %{
8710 __ imull($tmp$$Register, $op1$$Register, $op2$$constant);
8711 %}
8712 ins_pipe(ialu_reg_reg_alu0);
8713 %}
8715 //----------Long Instructions------------------------------------------------
8716 // Add Long Register with Register
8717 instruct addL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
8718 match(Set dst (AddL dst src));
8719 effect(KILL cr);
8720 ins_cost(200);
8721 format %{ "ADD $dst.lo,$src.lo\n\t"
8722 "ADC $dst.hi,$src.hi" %}
8723 opcode(0x03, 0x13);
8724 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
8725 ins_pipe( ialu_reg_reg_long );
8726 %}
8728 // Add Long Register with Immediate
8729 instruct addL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
8730 match(Set dst (AddL dst src));
8731 effect(KILL cr);
8732 format %{ "ADD $dst.lo,$src.lo\n\t"
8733 "ADC $dst.hi,$src.hi" %}
8734 opcode(0x81,0x00,0x02); /* Opcode 81 /0, 81 /2 */
8735 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
8736 ins_pipe( ialu_reg_long );
8737 %}
8739 // Add Long Register with Memory
8740 instruct addL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
8741 match(Set dst (AddL dst (LoadL mem)));
8742 effect(KILL cr);
8743 ins_cost(125);
8744 format %{ "ADD $dst.lo,$mem\n\t"
8745 "ADC $dst.hi,$mem+4" %}
8746 opcode(0x03, 0x13);
8747 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
8748 ins_pipe( ialu_reg_long_mem );
8749 %}
8751 // Subtract Long Register with Register.
8752 instruct subL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
8753 match(Set dst (SubL dst src));
8754 effect(KILL cr);
8755 ins_cost(200);
8756 format %{ "SUB $dst.lo,$src.lo\n\t"
8757 "SBB $dst.hi,$src.hi" %}
8758 opcode(0x2B, 0x1B);
8759 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
8760 ins_pipe( ialu_reg_reg_long );
8761 %}
8763 // Subtract Long Register with Immediate
8764 instruct subL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
8765 match(Set dst (SubL dst src));
8766 effect(KILL cr);
8767 format %{ "SUB $dst.lo,$src.lo\n\t"
8768 "SBB $dst.hi,$src.hi" %}
8769 opcode(0x81,0x05,0x03); /* Opcode 81 /5, 81 /3 */
8770 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
8771 ins_pipe( ialu_reg_long );
8772 %}
8774 // Subtract Long Register with Memory
8775 instruct subL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
8776 match(Set dst (SubL dst (LoadL mem)));
8777 effect(KILL cr);
8778 ins_cost(125);
8779 format %{ "SUB $dst.lo,$mem\n\t"
8780 "SBB $dst.hi,$mem+4" %}
8781 opcode(0x2B, 0x1B);
8782 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
8783 ins_pipe( ialu_reg_long_mem );
8784 %}
8786 instruct negL_eReg(eRegL dst, immL0 zero, eFlagsReg cr) %{
8787 match(Set dst (SubL zero dst));
8788 effect(KILL cr);
8789 ins_cost(300);
8790 format %{ "NEG $dst.hi\n\tNEG $dst.lo\n\tSBB $dst.hi,0" %}
8791 ins_encode( neg_long(dst) );
8792 ins_pipe( ialu_reg_reg_long );
8793 %}
8795 // And Long Register with Register
8796 instruct andL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
8797 match(Set dst (AndL dst src));
8798 effect(KILL cr);
8799 format %{ "AND $dst.lo,$src.lo\n\t"
8800 "AND $dst.hi,$src.hi" %}
8801 opcode(0x23,0x23);
8802 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
8803 ins_pipe( ialu_reg_reg_long );
8804 %}
8806 // And Long Register with Immediate
8807 instruct andL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
8808 match(Set dst (AndL dst src));
8809 effect(KILL cr);
8810 format %{ "AND $dst.lo,$src.lo\n\t"
8811 "AND $dst.hi,$src.hi" %}
8812 opcode(0x81,0x04,0x04); /* Opcode 81 /4, 81 /4 */
8813 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
8814 ins_pipe( ialu_reg_long );
8815 %}
8817 // And Long Register with Memory
8818 instruct andL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
8819 match(Set dst (AndL dst (LoadL mem)));
8820 effect(KILL cr);
8821 ins_cost(125);
8822 format %{ "AND $dst.lo,$mem\n\t"
8823 "AND $dst.hi,$mem+4" %}
8824 opcode(0x23, 0x23);
8825 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
8826 ins_pipe( ialu_reg_long_mem );
8827 %}
8829 // BMI1 instructions
8830 instruct andnL_eReg_eReg_eReg(eRegL dst, eRegL src1, eRegL src2, immL_M1 minus_1, eFlagsReg cr) %{
8831 match(Set dst (AndL (XorL src1 minus_1) src2));
8832 predicate(UseBMI1Instructions);
8833 effect(KILL cr, TEMP dst);
8835 format %{ "ANDNL $dst.lo, $src1.lo, $src2.lo\n\t"
8836 "ANDNL $dst.hi, $src1.hi, $src2.hi"
8837 %}
8839 ins_encode %{
8840 Register Rdst = $dst$$Register;
8841 Register Rsrc1 = $src1$$Register;
8842 Register Rsrc2 = $src2$$Register;
8843 __ andnl(Rdst, Rsrc1, Rsrc2);
8844 __ andnl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc1), HIGH_FROM_LOW(Rsrc2));
8845 %}
8846 ins_pipe(ialu_reg_reg_long);
8847 %}
8849 instruct andnL_eReg_eReg_mem(eRegL dst, eRegL src1, memory src2, immL_M1 minus_1, eFlagsReg cr) %{
8850 match(Set dst (AndL (XorL src1 minus_1) (LoadL src2) ));
8851 predicate(UseBMI1Instructions);
8852 effect(KILL cr, TEMP dst);
8854 ins_cost(125);
8855 format %{ "ANDNL $dst.lo, $src1.lo, $src2\n\t"
8856 "ANDNL $dst.hi, $src1.hi, $src2+4"
8857 %}
8859 ins_encode %{
8860 Register Rdst = $dst$$Register;
8861 Register Rsrc1 = $src1$$Register;
8862 Address src2_hi = Address::make_raw($src2$$base, $src2$$index, $src2$$scale, $src2$$disp + 4, relocInfo::none);
8864 __ andnl(Rdst, Rsrc1, $src2$$Address);
8865 __ andnl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc1), src2_hi);
8866 %}
8867 ins_pipe(ialu_reg_mem);
8868 %}
8870 instruct blsiL_eReg_eReg(eRegL dst, eRegL src, immL0 imm_zero, eFlagsReg cr) %{
8871 match(Set dst (AndL (SubL imm_zero src) src));
8872 predicate(UseBMI1Instructions);
8873 effect(KILL cr, TEMP dst);
8875 format %{ "MOVL $dst.hi, 0\n\t"
8876 "BLSIL $dst.lo, $src.lo\n\t"
8877 "JNZ done\n\t"
8878 "BLSIL $dst.hi, $src.hi\n"
8879 "done:"
8880 %}
8882 ins_encode %{
8883 Label done;
8884 Register Rdst = $dst$$Register;
8885 Register Rsrc = $src$$Register;
8886 __ movl(HIGH_FROM_LOW(Rdst), 0);
8887 __ blsil(Rdst, Rsrc);
8888 __ jccb(Assembler::notZero, done);
8889 __ blsil(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc));
8890 __ bind(done);
8891 %}
8892 ins_pipe(ialu_reg);
8893 %}
8895 instruct blsiL_eReg_mem(eRegL dst, memory src, immL0 imm_zero, eFlagsReg cr) %{
8896 match(Set dst (AndL (SubL imm_zero (LoadL src) ) (LoadL src) ));
8897 predicate(UseBMI1Instructions);
8898 effect(KILL cr, TEMP dst);
8900 ins_cost(125);
8901 format %{ "MOVL $dst.hi, 0\n\t"
8902 "BLSIL $dst.lo, $src\n\t"
8903 "JNZ done\n\t"
8904 "BLSIL $dst.hi, $src+4\n"
8905 "done:"
8906 %}
8908 ins_encode %{
8909 Label done;
8910 Register Rdst = $dst$$Register;
8911 Address src_hi = Address::make_raw($src$$base, $src$$index, $src$$scale, $src$$disp + 4, relocInfo::none);
8913 __ movl(HIGH_FROM_LOW(Rdst), 0);
8914 __ blsil(Rdst, $src$$Address);
8915 __ jccb(Assembler::notZero, done);
8916 __ blsil(HIGH_FROM_LOW(Rdst), src_hi);
8917 __ bind(done);
8918 %}
8919 ins_pipe(ialu_reg_mem);
8920 %}
8922 instruct blsmskL_eReg_eReg(eRegL dst, eRegL src, immL_M1 minus_1, eFlagsReg cr)
8923 %{
8924 match(Set dst (XorL (AddL src minus_1) src));
8925 predicate(UseBMI1Instructions);
8926 effect(KILL cr, TEMP dst);
8928 format %{ "MOVL $dst.hi, 0\n\t"
8929 "BLSMSKL $dst.lo, $src.lo\n\t"
8930 "JNC done\n\t"
8931 "BLSMSKL $dst.hi, $src.hi\n"
8932 "done:"
8933 %}
8935 ins_encode %{
8936 Label done;
8937 Register Rdst = $dst$$Register;
8938 Register Rsrc = $src$$Register;
8939 __ movl(HIGH_FROM_LOW(Rdst), 0);
8940 __ blsmskl(Rdst, Rsrc);
8941 __ jccb(Assembler::carryClear, done);
8942 __ blsmskl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc));
8943 __ bind(done);
8944 %}
8946 ins_pipe(ialu_reg);
8947 %}
8949 instruct blsmskL_eReg_mem(eRegL dst, memory src, immL_M1 minus_1, eFlagsReg cr)
8950 %{
8951 match(Set dst (XorL (AddL (LoadL src) minus_1) (LoadL src) ));
8952 predicate(UseBMI1Instructions);
8953 effect(KILL cr, TEMP dst);
8955 ins_cost(125);
8956 format %{ "MOVL $dst.hi, 0\n\t"
8957 "BLSMSKL $dst.lo, $src\n\t"
8958 "JNC done\n\t"
8959 "BLSMSKL $dst.hi, $src+4\n"
8960 "done:"
8961 %}
8963 ins_encode %{
8964 Label done;
8965 Register Rdst = $dst$$Register;
8966 Address src_hi = Address::make_raw($src$$base, $src$$index, $src$$scale, $src$$disp + 4, relocInfo::none);
8968 __ movl(HIGH_FROM_LOW(Rdst), 0);
8969 __ blsmskl(Rdst, $src$$Address);
8970 __ jccb(Assembler::carryClear, done);
8971 __ blsmskl(HIGH_FROM_LOW(Rdst), src_hi);
8972 __ bind(done);
8973 %}
8975 ins_pipe(ialu_reg_mem);
8976 %}
8978 instruct blsrL_eReg_eReg(eRegL dst, eRegL src, immL_M1 minus_1, eFlagsReg cr)
8979 %{
8980 match(Set dst (AndL (AddL src minus_1) src) );
8981 predicate(UseBMI1Instructions);
8982 effect(KILL cr, TEMP dst);
8984 format %{ "MOVL $dst.hi, $src.hi\n\t"
8985 "BLSRL $dst.lo, $src.lo\n\t"
8986 "JNC done\n\t"
8987 "BLSRL $dst.hi, $src.hi\n"
8988 "done:"
8989 %}
8991 ins_encode %{
8992 Label done;
8993 Register Rdst = $dst$$Register;
8994 Register Rsrc = $src$$Register;
8995 __ movl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc));
8996 __ blsrl(Rdst, Rsrc);
8997 __ jccb(Assembler::carryClear, done);
8998 __ blsrl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rsrc));
8999 __ bind(done);
9000 %}
9002 ins_pipe(ialu_reg);
9003 %}
9005 instruct blsrL_eReg_mem(eRegL dst, memory src, immL_M1 minus_1, eFlagsReg cr)
9006 %{
9007 match(Set dst (AndL (AddL (LoadL src) minus_1) (LoadL src) ));
9008 predicate(UseBMI1Instructions);
9009 effect(KILL cr, TEMP dst);
9011 ins_cost(125);
9012 format %{ "MOVL $dst.hi, $src+4\n\t"
9013 "BLSRL $dst.lo, $src\n\t"
9014 "JNC done\n\t"
9015 "BLSRL $dst.hi, $src+4\n"
9016 "done:"
9017 %}
9019 ins_encode %{
9020 Label done;
9021 Register Rdst = $dst$$Register;
9022 Address src_hi = Address::make_raw($src$$base, $src$$index, $src$$scale, $src$$disp + 4, relocInfo::none);
9023 __ movl(HIGH_FROM_LOW(Rdst), src_hi);
9024 __ blsrl(Rdst, $src$$Address);
9025 __ jccb(Assembler::carryClear, done);
9026 __ blsrl(HIGH_FROM_LOW(Rdst), src_hi);
9027 __ bind(done);
9028 %}
9030 ins_pipe(ialu_reg_mem);
9031 %}
9033 // Or Long Register with Register
9034 instruct orl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9035 match(Set dst (OrL dst src));
9036 effect(KILL cr);
9037 format %{ "OR $dst.lo,$src.lo\n\t"
9038 "OR $dst.hi,$src.hi" %}
9039 opcode(0x0B,0x0B);
9040 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9041 ins_pipe( ialu_reg_reg_long );
9042 %}
9044 // Or Long Register with Immediate
9045 instruct orl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9046 match(Set dst (OrL dst src));
9047 effect(KILL cr);
9048 format %{ "OR $dst.lo,$src.lo\n\t"
9049 "OR $dst.hi,$src.hi" %}
9050 opcode(0x81,0x01,0x01); /* Opcode 81 /1, 81 /1 */
9051 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9052 ins_pipe( ialu_reg_long );
9053 %}
9055 // Or Long Register with Memory
9056 instruct orl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9057 match(Set dst (OrL dst (LoadL mem)));
9058 effect(KILL cr);
9059 ins_cost(125);
9060 format %{ "OR $dst.lo,$mem\n\t"
9061 "OR $dst.hi,$mem+4" %}
9062 opcode(0x0B,0x0B);
9063 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9064 ins_pipe( ialu_reg_long_mem );
9065 %}
9067 // Xor Long Register with Register
9068 instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9069 match(Set dst (XorL dst src));
9070 effect(KILL cr);
9071 format %{ "XOR $dst.lo,$src.lo\n\t"
9072 "XOR $dst.hi,$src.hi" %}
9073 opcode(0x33,0x33);
9074 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9075 ins_pipe( ialu_reg_reg_long );
9076 %}
9078 // Xor Long Register with Immediate -1
9079 instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
9080 match(Set dst (XorL dst imm));
9081 format %{ "NOT $dst.lo\n\t"
9082 "NOT $dst.hi" %}
9083 ins_encode %{
9084 __ notl($dst$$Register);
9085 __ notl(HIGH_FROM_LOW($dst$$Register));
9086 %}
9087 ins_pipe( ialu_reg_long );
9088 %}
9090 // Xor Long Register with Immediate
9091 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9092 match(Set dst (XorL dst src));
9093 effect(KILL cr);
9094 format %{ "XOR $dst.lo,$src.lo\n\t"
9095 "XOR $dst.hi,$src.hi" %}
9096 opcode(0x81,0x06,0x06); /* Opcode 81 /6, 81 /6 */
9097 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9098 ins_pipe( ialu_reg_long );
9099 %}
9101 // Xor Long Register with Memory
9102 instruct xorl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9103 match(Set dst (XorL dst (LoadL mem)));
9104 effect(KILL cr);
9105 ins_cost(125);
9106 format %{ "XOR $dst.lo,$mem\n\t"
9107 "XOR $dst.hi,$mem+4" %}
9108 opcode(0x33,0x33);
9109 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9110 ins_pipe( ialu_reg_long_mem );
9111 %}
9113 // Shift Left Long by 1
9114 instruct shlL_eReg_1(eRegL dst, immI_1 cnt, eFlagsReg cr) %{
9115 predicate(UseNewLongLShift);
9116 match(Set dst (LShiftL dst cnt));
9117 effect(KILL cr);
9118 ins_cost(100);
9119 format %{ "ADD $dst.lo,$dst.lo\n\t"
9120 "ADC $dst.hi,$dst.hi" %}
9121 ins_encode %{
9122 __ addl($dst$$Register,$dst$$Register);
9123 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9124 %}
9125 ins_pipe( ialu_reg_long );
9126 %}
9128 // Shift Left Long by 2
9129 instruct shlL_eReg_2(eRegL dst, immI_2 cnt, eFlagsReg cr) %{
9130 predicate(UseNewLongLShift);
9131 match(Set dst (LShiftL dst cnt));
9132 effect(KILL cr);
9133 ins_cost(100);
9134 format %{ "ADD $dst.lo,$dst.lo\n\t"
9135 "ADC $dst.hi,$dst.hi\n\t"
9136 "ADD $dst.lo,$dst.lo\n\t"
9137 "ADC $dst.hi,$dst.hi" %}
9138 ins_encode %{
9139 __ addl($dst$$Register,$dst$$Register);
9140 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9141 __ addl($dst$$Register,$dst$$Register);
9142 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9143 %}
9144 ins_pipe( ialu_reg_long );
9145 %}
9147 // Shift Left Long by 3
9148 instruct shlL_eReg_3(eRegL dst, immI_3 cnt, eFlagsReg cr) %{
9149 predicate(UseNewLongLShift);
9150 match(Set dst (LShiftL dst cnt));
9151 effect(KILL cr);
9152 ins_cost(100);
9153 format %{ "ADD $dst.lo,$dst.lo\n\t"
9154 "ADC $dst.hi,$dst.hi\n\t"
9155 "ADD $dst.lo,$dst.lo\n\t"
9156 "ADC $dst.hi,$dst.hi\n\t"
9157 "ADD $dst.lo,$dst.lo\n\t"
9158 "ADC $dst.hi,$dst.hi" %}
9159 ins_encode %{
9160 __ addl($dst$$Register,$dst$$Register);
9161 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9162 __ addl($dst$$Register,$dst$$Register);
9163 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9164 __ addl($dst$$Register,$dst$$Register);
9165 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9166 %}
9167 ins_pipe( ialu_reg_long );
9168 %}
9170 // Shift Left Long by 1-31
9171 instruct shlL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9172 match(Set dst (LShiftL dst cnt));
9173 effect(KILL cr);
9174 ins_cost(200);
9175 format %{ "SHLD $dst.hi,$dst.lo,$cnt\n\t"
9176 "SHL $dst.lo,$cnt" %}
9177 opcode(0xC1, 0x4, 0xA4); /* 0F/A4, then C1 /4 ib */
9178 ins_encode( move_long_small_shift(dst,cnt) );
9179 ins_pipe( ialu_reg_long );
9180 %}
9182 // Shift Left Long by 32-63
9183 instruct shlL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9184 match(Set dst (LShiftL dst cnt));
9185 effect(KILL cr);
9186 ins_cost(300);
9187 format %{ "MOV $dst.hi,$dst.lo\n"
9188 "\tSHL $dst.hi,$cnt-32\n"
9189 "\tXOR $dst.lo,$dst.lo" %}
9190 opcode(0xC1, 0x4); /* C1 /4 ib */
9191 ins_encode( move_long_big_shift_clr(dst,cnt) );
9192 ins_pipe( ialu_reg_long );
9193 %}
9195 // Shift Left Long by variable
9196 instruct salL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9197 match(Set dst (LShiftL dst shift));
9198 effect(KILL cr);
9199 ins_cost(500+200);
9200 size(17);
9201 format %{ "TEST $shift,32\n\t"
9202 "JEQ,s small\n\t"
9203 "MOV $dst.hi,$dst.lo\n\t"
9204 "XOR $dst.lo,$dst.lo\n"
9205 "small:\tSHLD $dst.hi,$dst.lo,$shift\n\t"
9206 "SHL $dst.lo,$shift" %}
9207 ins_encode( shift_left_long( dst, shift ) );
9208 ins_pipe( pipe_slow );
9209 %}
9211 // Shift Right Long by 1-31
9212 instruct shrL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9213 match(Set dst (URShiftL dst cnt));
9214 effect(KILL cr);
9215 ins_cost(200);
9216 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9217 "SHR $dst.hi,$cnt" %}
9218 opcode(0xC1, 0x5, 0xAC); /* 0F/AC, then C1 /5 ib */
9219 ins_encode( move_long_small_shift(dst,cnt) );
9220 ins_pipe( ialu_reg_long );
9221 %}
9223 // Shift Right Long by 32-63
9224 instruct shrL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9225 match(Set dst (URShiftL dst cnt));
9226 effect(KILL cr);
9227 ins_cost(300);
9228 format %{ "MOV $dst.lo,$dst.hi\n"
9229 "\tSHR $dst.lo,$cnt-32\n"
9230 "\tXOR $dst.hi,$dst.hi" %}
9231 opcode(0xC1, 0x5); /* C1 /5 ib */
9232 ins_encode( move_long_big_shift_clr(dst,cnt) );
9233 ins_pipe( ialu_reg_long );
9234 %}
9236 // Shift Right Long by variable
9237 instruct shrL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9238 match(Set dst (URShiftL dst shift));
9239 effect(KILL cr);
9240 ins_cost(600);
9241 size(17);
9242 format %{ "TEST $shift,32\n\t"
9243 "JEQ,s small\n\t"
9244 "MOV $dst.lo,$dst.hi\n\t"
9245 "XOR $dst.hi,$dst.hi\n"
9246 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9247 "SHR $dst.hi,$shift" %}
9248 ins_encode( shift_right_long( dst, shift ) );
9249 ins_pipe( pipe_slow );
9250 %}
9252 // Shift Right Long by 1-31
9253 instruct sarL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9254 match(Set dst (RShiftL dst cnt));
9255 effect(KILL cr);
9256 ins_cost(200);
9257 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9258 "SAR $dst.hi,$cnt" %}
9259 opcode(0xC1, 0x7, 0xAC); /* 0F/AC, then C1 /7 ib */
9260 ins_encode( move_long_small_shift(dst,cnt) );
9261 ins_pipe( ialu_reg_long );
9262 %}
9264 // Shift Right Long by 32-63
9265 instruct sarL_eReg_32_63( eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9266 match(Set dst (RShiftL dst cnt));
9267 effect(KILL cr);
9268 ins_cost(300);
9269 format %{ "MOV $dst.lo,$dst.hi\n"
9270 "\tSAR $dst.lo,$cnt-32\n"
9271 "\tSAR $dst.hi,31" %}
9272 opcode(0xC1, 0x7); /* C1 /7 ib */
9273 ins_encode( move_long_big_shift_sign(dst,cnt) );
9274 ins_pipe( ialu_reg_long );
9275 %}
9277 // Shift Right arithmetic Long by variable
9278 instruct sarL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9279 match(Set dst (RShiftL dst shift));
9280 effect(KILL cr);
9281 ins_cost(600);
9282 size(18);
9283 format %{ "TEST $shift,32\n\t"
9284 "JEQ,s small\n\t"
9285 "MOV $dst.lo,$dst.hi\n\t"
9286 "SAR $dst.hi,31\n"
9287 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9288 "SAR $dst.hi,$shift" %}
9289 ins_encode( shift_right_arith_long( dst, shift ) );
9290 ins_pipe( pipe_slow );
9291 %}
9294 //----------Double Instructions------------------------------------------------
9295 // Double Math
9297 // Compare & branch
9299 // P6 version of float compare, sets condition codes in EFLAGS
9300 instruct cmpDPR_cc_P6(eFlagsRegU cr, regDPR src1, regDPR src2, eAXRegI rax) %{
9301 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9302 match(Set cr (CmpD src1 src2));
9303 effect(KILL rax);
9304 ins_cost(150);
9305 format %{ "FLD $src1\n\t"
9306 "FUCOMIP ST,$src2 // P6 instruction\n\t"
9307 "JNP exit\n\t"
9308 "MOV ah,1 // saw a NaN, set CF\n\t"
9309 "SAHF\n"
9310 "exit:\tNOP // avoid branch to branch" %}
9311 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9312 ins_encode( Push_Reg_DPR(src1),
9313 OpcP, RegOpc(src2),
9314 cmpF_P6_fixup );
9315 ins_pipe( pipe_slow );
9316 %}
9318 instruct cmpDPR_cc_P6CF(eFlagsRegUCF cr, regDPR src1, regDPR src2) %{
9319 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9320 match(Set cr (CmpD src1 src2));
9321 ins_cost(150);
9322 format %{ "FLD $src1\n\t"
9323 "FUCOMIP ST,$src2 // P6 instruction" %}
9324 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9325 ins_encode( Push_Reg_DPR(src1),
9326 OpcP, RegOpc(src2));
9327 ins_pipe( pipe_slow );
9328 %}
9330 // Compare & branch
9331 instruct cmpDPR_cc(eFlagsRegU cr, regDPR src1, regDPR src2, eAXRegI rax) %{
9332 predicate(UseSSE<=1);
9333 match(Set cr (CmpD src1 src2));
9334 effect(KILL rax);
9335 ins_cost(200);
9336 format %{ "FLD $src1\n\t"
9337 "FCOMp $src2\n\t"
9338 "FNSTSW AX\n\t"
9339 "TEST AX,0x400\n\t"
9340 "JZ,s flags\n\t"
9341 "MOV AH,1\t# unordered treat as LT\n"
9342 "flags:\tSAHF" %}
9343 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9344 ins_encode( Push_Reg_DPR(src1),
9345 OpcP, RegOpc(src2),
9346 fpu_flags);
9347 ins_pipe( pipe_slow );
9348 %}
9350 // Compare vs zero into -1,0,1
9351 instruct cmpDPR_0(rRegI dst, regDPR src1, immDPR0 zero, eAXRegI rax, eFlagsReg cr) %{
9352 predicate(UseSSE<=1);
9353 match(Set dst (CmpD3 src1 zero));
9354 effect(KILL cr, KILL rax);
9355 ins_cost(280);
9356 format %{ "FTSTD $dst,$src1" %}
9357 opcode(0xE4, 0xD9);
9358 ins_encode( Push_Reg_DPR(src1),
9359 OpcS, OpcP, PopFPU,
9360 CmpF_Result(dst));
9361 ins_pipe( pipe_slow );
9362 %}
9364 // Compare into -1,0,1
9365 instruct cmpDPR_reg(rRegI dst, regDPR src1, regDPR src2, eAXRegI rax, eFlagsReg cr) %{
9366 predicate(UseSSE<=1);
9367 match(Set dst (CmpD3 src1 src2));
9368 effect(KILL cr, KILL rax);
9369 ins_cost(300);
9370 format %{ "FCMPD $dst,$src1,$src2" %}
9371 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9372 ins_encode( Push_Reg_DPR(src1),
9373 OpcP, RegOpc(src2),
9374 CmpF_Result(dst));
9375 ins_pipe( pipe_slow );
9376 %}
9378 // float compare and set condition codes in EFLAGS by XMM regs
9379 instruct cmpD_cc(eFlagsRegU cr, regD src1, regD src2) %{
9380 predicate(UseSSE>=2);
9381 match(Set cr (CmpD src1 src2));
9382 ins_cost(145);
9383 format %{ "UCOMISD $src1,$src2\n\t"
9384 "JNP,s exit\n\t"
9385 "PUSHF\t# saw NaN, set CF\n\t"
9386 "AND [rsp], #0xffffff2b\n\t"
9387 "POPF\n"
9388 "exit:" %}
9389 ins_encode %{
9390 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9391 emit_cmpfp_fixup(_masm);
9392 %}
9393 ins_pipe( pipe_slow );
9394 %}
9396 instruct cmpD_ccCF(eFlagsRegUCF cr, regD src1, regD src2) %{
9397 predicate(UseSSE>=2);
9398 match(Set cr (CmpD src1 src2));
9399 ins_cost(100);
9400 format %{ "UCOMISD $src1,$src2" %}
9401 ins_encode %{
9402 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9403 %}
9404 ins_pipe( pipe_slow );
9405 %}
9407 // float compare and set condition codes in EFLAGS by XMM regs
9408 instruct cmpD_ccmem(eFlagsRegU cr, regD src1, memory src2) %{
9409 predicate(UseSSE>=2);
9410 match(Set cr (CmpD src1 (LoadD src2)));
9411 ins_cost(145);
9412 format %{ "UCOMISD $src1,$src2\n\t"
9413 "JNP,s exit\n\t"
9414 "PUSHF\t# saw NaN, set CF\n\t"
9415 "AND [rsp], #0xffffff2b\n\t"
9416 "POPF\n"
9417 "exit:" %}
9418 ins_encode %{
9419 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9420 emit_cmpfp_fixup(_masm);
9421 %}
9422 ins_pipe( pipe_slow );
9423 %}
9425 instruct cmpD_ccmemCF(eFlagsRegUCF cr, regD src1, memory src2) %{
9426 predicate(UseSSE>=2);
9427 match(Set cr (CmpD src1 (LoadD src2)));
9428 ins_cost(100);
9429 format %{ "UCOMISD $src1,$src2" %}
9430 ins_encode %{
9431 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9432 %}
9433 ins_pipe( pipe_slow );
9434 %}
9436 // Compare into -1,0,1 in XMM
9437 instruct cmpD_reg(xRegI dst, regD src1, regD src2, eFlagsReg cr) %{
9438 predicate(UseSSE>=2);
9439 match(Set dst (CmpD3 src1 src2));
9440 effect(KILL cr);
9441 ins_cost(255);
9442 format %{ "UCOMISD $src1, $src2\n\t"
9443 "MOV $dst, #-1\n\t"
9444 "JP,s done\n\t"
9445 "JB,s done\n\t"
9446 "SETNE $dst\n\t"
9447 "MOVZB $dst, $dst\n"
9448 "done:" %}
9449 ins_encode %{
9450 __ ucomisd($src1$$XMMRegister, $src2$$XMMRegister);
9451 emit_cmpfp3(_masm, $dst$$Register);
9452 %}
9453 ins_pipe( pipe_slow );
9454 %}
9456 // Compare into -1,0,1 in XMM and memory
9457 instruct cmpD_regmem(xRegI dst, regD src1, memory src2, eFlagsReg cr) %{
9458 predicate(UseSSE>=2);
9459 match(Set dst (CmpD3 src1 (LoadD src2)));
9460 effect(KILL cr);
9461 ins_cost(275);
9462 format %{ "UCOMISD $src1, $src2\n\t"
9463 "MOV $dst, #-1\n\t"
9464 "JP,s done\n\t"
9465 "JB,s done\n\t"
9466 "SETNE $dst\n\t"
9467 "MOVZB $dst, $dst\n"
9468 "done:" %}
9469 ins_encode %{
9470 __ ucomisd($src1$$XMMRegister, $src2$$Address);
9471 emit_cmpfp3(_masm, $dst$$Register);
9472 %}
9473 ins_pipe( pipe_slow );
9474 %}
9477 instruct subDPR_reg(regDPR dst, regDPR src) %{
9478 predicate (UseSSE <=1);
9479 match(Set dst (SubD dst src));
9481 format %{ "FLD $src\n\t"
9482 "DSUBp $dst,ST" %}
9483 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
9484 ins_cost(150);
9485 ins_encode( Push_Reg_DPR(src),
9486 OpcP, RegOpc(dst) );
9487 ins_pipe( fpu_reg_reg );
9488 %}
9490 instruct subDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9491 predicate (UseSSE <=1);
9492 match(Set dst (RoundDouble (SubD src1 src2)));
9493 ins_cost(250);
9495 format %{ "FLD $src2\n\t"
9496 "DSUB ST,$src1\n\t"
9497 "FSTP_D $dst\t# D-round" %}
9498 opcode(0xD8, 0x5);
9499 ins_encode( Push_Reg_DPR(src2),
9500 OpcP, RegOpc(src1), Pop_Mem_DPR(dst) );
9501 ins_pipe( fpu_mem_reg_reg );
9502 %}
9505 instruct subDPR_reg_mem(regDPR dst, memory src) %{
9506 predicate (UseSSE <=1);
9507 match(Set dst (SubD dst (LoadD src)));
9508 ins_cost(150);
9510 format %{ "FLD $src\n\t"
9511 "DSUBp $dst,ST" %}
9512 opcode(0xDE, 0x5, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
9513 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9514 OpcP, RegOpc(dst) );
9515 ins_pipe( fpu_reg_mem );
9516 %}
9518 instruct absDPR_reg(regDPR1 dst, regDPR1 src) %{
9519 predicate (UseSSE<=1);
9520 match(Set dst (AbsD src));
9521 ins_cost(100);
9522 format %{ "FABS" %}
9523 opcode(0xE1, 0xD9);
9524 ins_encode( OpcS, OpcP );
9525 ins_pipe( fpu_reg_reg );
9526 %}
9528 instruct negDPR_reg(regDPR1 dst, regDPR1 src) %{
9529 predicate(UseSSE<=1);
9530 match(Set dst (NegD src));
9531 ins_cost(100);
9532 format %{ "FCHS" %}
9533 opcode(0xE0, 0xD9);
9534 ins_encode( OpcS, OpcP );
9535 ins_pipe( fpu_reg_reg );
9536 %}
9538 instruct addDPR_reg(regDPR dst, regDPR src) %{
9539 predicate(UseSSE<=1);
9540 match(Set dst (AddD dst src));
9541 format %{ "FLD $src\n\t"
9542 "DADD $dst,ST" %}
9543 size(4);
9544 ins_cost(150);
9545 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
9546 ins_encode( Push_Reg_DPR(src),
9547 OpcP, RegOpc(dst) );
9548 ins_pipe( fpu_reg_reg );
9549 %}
9552 instruct addDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9553 predicate(UseSSE<=1);
9554 match(Set dst (RoundDouble (AddD src1 src2)));
9555 ins_cost(250);
9557 format %{ "FLD $src2\n\t"
9558 "DADD ST,$src1\n\t"
9559 "FSTP_D $dst\t# D-round" %}
9560 opcode(0xD8, 0x0); /* D8 C0+i or D8 /0*/
9561 ins_encode( Push_Reg_DPR(src2),
9562 OpcP, RegOpc(src1), Pop_Mem_DPR(dst) );
9563 ins_pipe( fpu_mem_reg_reg );
9564 %}
9567 instruct addDPR_reg_mem(regDPR dst, memory src) %{
9568 predicate(UseSSE<=1);
9569 match(Set dst (AddD dst (LoadD src)));
9570 ins_cost(150);
9572 format %{ "FLD $src\n\t"
9573 "DADDp $dst,ST" %}
9574 opcode(0xDE, 0x0, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
9575 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9576 OpcP, RegOpc(dst) );
9577 ins_pipe( fpu_reg_mem );
9578 %}
9580 // add-to-memory
9581 instruct addDPR_mem_reg(memory dst, regDPR src) %{
9582 predicate(UseSSE<=1);
9583 match(Set dst (StoreD dst (RoundDouble (AddD (LoadD dst) src))));
9584 ins_cost(150);
9586 format %{ "FLD_D $dst\n\t"
9587 "DADD ST,$src\n\t"
9588 "FST_D $dst" %}
9589 opcode(0xDD, 0x0);
9590 ins_encode( Opcode(0xDD), RMopc_Mem(0x00,dst),
9591 Opcode(0xD8), RegOpc(src),
9592 set_instruction_start,
9593 Opcode(0xDD), RMopc_Mem(0x03,dst) );
9594 ins_pipe( fpu_reg_mem );
9595 %}
9597 instruct addDPR_reg_imm1(regDPR dst, immDPR1 con) %{
9598 predicate(UseSSE<=1);
9599 match(Set dst (AddD dst con));
9600 ins_cost(125);
9601 format %{ "FLD1\n\t"
9602 "DADDp $dst,ST" %}
9603 ins_encode %{
9604 __ fld1();
9605 __ faddp($dst$$reg);
9606 %}
9607 ins_pipe(fpu_reg);
9608 %}
9610 instruct addDPR_reg_imm(regDPR dst, immDPR con) %{
9611 predicate(UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
9612 match(Set dst (AddD dst con));
9613 ins_cost(200);
9614 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9615 "DADDp $dst,ST" %}
9616 ins_encode %{
9617 __ fld_d($constantaddress($con));
9618 __ faddp($dst$$reg);
9619 %}
9620 ins_pipe(fpu_reg_mem);
9621 %}
9623 instruct addDPR_reg_imm_round(stackSlotD dst, regDPR src, immDPR con) %{
9624 predicate(UseSSE<=1 && _kids[0]->_kids[1]->_leaf->getd() != 0.0 && _kids[0]->_kids[1]->_leaf->getd() != 1.0 );
9625 match(Set dst (RoundDouble (AddD src con)));
9626 ins_cost(200);
9627 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9628 "DADD ST,$src\n\t"
9629 "FSTP_D $dst\t# D-round" %}
9630 ins_encode %{
9631 __ fld_d($constantaddress($con));
9632 __ fadd($src$$reg);
9633 __ fstp_d(Address(rsp, $dst$$disp));
9634 %}
9635 ins_pipe(fpu_mem_reg_con);
9636 %}
9638 instruct mulDPR_reg(regDPR dst, regDPR src) %{
9639 predicate(UseSSE<=1);
9640 match(Set dst (MulD dst src));
9641 format %{ "FLD $src\n\t"
9642 "DMULp $dst,ST" %}
9643 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
9644 ins_cost(150);
9645 ins_encode( Push_Reg_DPR(src),
9646 OpcP, RegOpc(dst) );
9647 ins_pipe( fpu_reg_reg );
9648 %}
9650 // Strict FP instruction biases argument before multiply then
9651 // biases result to avoid double rounding of subnormals.
9652 //
9653 // scale arg1 by multiplying arg1 by 2^(-15360)
9654 // load arg2
9655 // multiply scaled arg1 by arg2
9656 // rescale product by 2^(15360)
9657 //
9658 instruct strictfp_mulDPR_reg(regDPR1 dst, regnotDPR1 src) %{
9659 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
9660 match(Set dst (MulD dst src));
9661 ins_cost(1); // Select this instruction for all strict FP double multiplies
9663 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
9664 "DMULp $dst,ST\n\t"
9665 "FLD $src\n\t"
9666 "DMULp $dst,ST\n\t"
9667 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
9668 "DMULp $dst,ST\n\t" %}
9669 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
9670 ins_encode( strictfp_bias1(dst),
9671 Push_Reg_DPR(src),
9672 OpcP, RegOpc(dst),
9673 strictfp_bias2(dst) );
9674 ins_pipe( fpu_reg_reg );
9675 %}
9677 instruct mulDPR_reg_imm(regDPR dst, immDPR con) %{
9678 predicate( UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
9679 match(Set dst (MulD dst con));
9680 ins_cost(200);
9681 format %{ "FLD_D [$constantaddress]\t# load from constant table: double=$con\n\t"
9682 "DMULp $dst,ST" %}
9683 ins_encode %{
9684 __ fld_d($constantaddress($con));
9685 __ fmulp($dst$$reg);
9686 %}
9687 ins_pipe(fpu_reg_mem);
9688 %}
9691 instruct mulDPR_reg_mem(regDPR dst, memory src) %{
9692 predicate( UseSSE<=1 );
9693 match(Set dst (MulD dst (LoadD src)));
9694 ins_cost(200);
9695 format %{ "FLD_D $src\n\t"
9696 "DMULp $dst,ST" %}
9697 opcode(0xDE, 0x1, 0xDD); /* DE C8+i or DE /1*/ /* LoadD DD /0 */
9698 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
9699 OpcP, RegOpc(dst) );
9700 ins_pipe( fpu_reg_mem );
9701 %}
9703 //
9704 // Cisc-alternate to reg-reg multiply
9705 instruct mulDPR_reg_mem_cisc(regDPR dst, regDPR src, memory mem) %{
9706 predicate( UseSSE<=1 );
9707 match(Set dst (MulD src (LoadD mem)));
9708 ins_cost(250);
9709 format %{ "FLD_D $mem\n\t"
9710 "DMUL ST,$src\n\t"
9711 "FSTP_D $dst" %}
9712 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadD D9 /0 */
9713 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem),
9714 OpcReg_FPR(src),
9715 Pop_Reg_DPR(dst) );
9716 ins_pipe( fpu_reg_reg_mem );
9717 %}
9720 // MACRO3 -- addDPR a mulDPR
9721 // This instruction is a '2-address' instruction in that the result goes
9722 // back to src2. This eliminates a move from the macro; possibly the
9723 // register allocator will have to add it back (and maybe not).
9724 instruct addDPR_mulDPR_reg(regDPR src2, regDPR src1, regDPR src0) %{
9725 predicate( UseSSE<=1 );
9726 match(Set src2 (AddD (MulD src0 src1) src2));
9727 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
9728 "DMUL ST,$src1\n\t"
9729 "DADDp $src2,ST" %}
9730 ins_cost(250);
9731 opcode(0xDD); /* LoadD DD /0 */
9732 ins_encode( Push_Reg_FPR(src0),
9733 FMul_ST_reg(src1),
9734 FAddP_reg_ST(src2) );
9735 ins_pipe( fpu_reg_reg_reg );
9736 %}
9739 // MACRO3 -- subDPR a mulDPR
9740 instruct subDPR_mulDPR_reg(regDPR src2, regDPR src1, regDPR src0) %{
9741 predicate( UseSSE<=1 );
9742 match(Set src2 (SubD (MulD src0 src1) src2));
9743 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
9744 "DMUL ST,$src1\n\t"
9745 "DSUBRp $src2,ST" %}
9746 ins_cost(250);
9747 ins_encode( Push_Reg_FPR(src0),
9748 FMul_ST_reg(src1),
9749 Opcode(0xDE), Opc_plus(0xE0,src2));
9750 ins_pipe( fpu_reg_reg_reg );
9751 %}
9754 instruct divDPR_reg(regDPR dst, regDPR src) %{
9755 predicate( UseSSE<=1 );
9756 match(Set dst (DivD dst src));
9758 format %{ "FLD $src\n\t"
9759 "FDIVp $dst,ST" %}
9760 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
9761 ins_cost(150);
9762 ins_encode( Push_Reg_DPR(src),
9763 OpcP, RegOpc(dst) );
9764 ins_pipe( fpu_reg_reg );
9765 %}
9767 // Strict FP instruction biases argument before division then
9768 // biases result, to avoid double rounding of subnormals.
9769 //
9770 // scale dividend by multiplying dividend by 2^(-15360)
9771 // load divisor
9772 // divide scaled dividend by divisor
9773 // rescale quotient by 2^(15360)
9774 //
9775 instruct strictfp_divDPR_reg(regDPR1 dst, regnotDPR1 src) %{
9776 predicate (UseSSE<=1);
9777 match(Set dst (DivD dst src));
9778 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
9779 ins_cost(01);
9781 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
9782 "DMULp $dst,ST\n\t"
9783 "FLD $src\n\t"
9784 "FDIVp $dst,ST\n\t"
9785 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
9786 "DMULp $dst,ST\n\t" %}
9787 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
9788 ins_encode( strictfp_bias1(dst),
9789 Push_Reg_DPR(src),
9790 OpcP, RegOpc(dst),
9791 strictfp_bias2(dst) );
9792 ins_pipe( fpu_reg_reg );
9793 %}
9795 instruct divDPR_reg_round(stackSlotD dst, regDPR src1, regDPR src2) %{
9796 predicate( UseSSE<=1 && !(Compile::current()->has_method() && Compile::current()->method()->is_strict()) );
9797 match(Set dst (RoundDouble (DivD src1 src2)));
9799 format %{ "FLD $src1\n\t"
9800 "FDIV ST,$src2\n\t"
9801 "FSTP_D $dst\t# D-round" %}
9802 opcode(0xD8, 0x6); /* D8 F0+i or D8 /6 */
9803 ins_encode( Push_Reg_DPR(src1),
9804 OpcP, RegOpc(src2), Pop_Mem_DPR(dst) );
9805 ins_pipe( fpu_mem_reg_reg );
9806 %}
9809 instruct modDPR_reg(regDPR dst, regDPR src, eAXRegI rax, eFlagsReg cr) %{
9810 predicate(UseSSE<=1);
9811 match(Set dst (ModD dst src));
9812 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
9814 format %{ "DMOD $dst,$src" %}
9815 ins_cost(250);
9816 ins_encode(Push_Reg_Mod_DPR(dst, src),
9817 emitModDPR(),
9818 Push_Result_Mod_DPR(src),
9819 Pop_Reg_DPR(dst));
9820 ins_pipe( pipe_slow );
9821 %}
9823 instruct modD_reg(regD dst, regD src0, regD src1, eAXRegI rax, eFlagsReg cr) %{
9824 predicate(UseSSE>=2);
9825 match(Set dst (ModD src0 src1));
9826 effect(KILL rax, KILL cr);
9828 format %{ "SUB ESP,8\t # DMOD\n"
9829 "\tMOVSD [ESP+0],$src1\n"
9830 "\tFLD_D [ESP+0]\n"
9831 "\tMOVSD [ESP+0],$src0\n"
9832 "\tFLD_D [ESP+0]\n"
9833 "loop:\tFPREM\n"
9834 "\tFWAIT\n"
9835 "\tFNSTSW AX\n"
9836 "\tSAHF\n"
9837 "\tJP loop\n"
9838 "\tFSTP_D [ESP+0]\n"
9839 "\tMOVSD $dst,[ESP+0]\n"
9840 "\tADD ESP,8\n"
9841 "\tFSTP ST0\t # Restore FPU Stack"
9842 %}
9843 ins_cost(250);
9844 ins_encode( Push_ModD_encoding(src0, src1), emitModDPR(), Push_ResultD(dst), PopFPU);
9845 ins_pipe( pipe_slow );
9846 %}
9848 instruct sinDPR_reg(regDPR1 dst, regDPR1 src) %{
9849 predicate (UseSSE<=1);
9850 match(Set dst (SinD src));
9851 ins_cost(1800);
9852 format %{ "DSIN $dst" %}
9853 opcode(0xD9, 0xFE);
9854 ins_encode( OpcP, OpcS );
9855 ins_pipe( pipe_slow );
9856 %}
9858 instruct sinD_reg(regD dst, eFlagsReg cr) %{
9859 predicate (UseSSE>=2);
9860 match(Set dst (SinD dst));
9861 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9862 ins_cost(1800);
9863 format %{ "DSIN $dst" %}
9864 opcode(0xD9, 0xFE);
9865 ins_encode( Push_SrcD(dst), OpcP, OpcS, Push_ResultD(dst) );
9866 ins_pipe( pipe_slow );
9867 %}
9869 instruct cosDPR_reg(regDPR1 dst, regDPR1 src) %{
9870 predicate (UseSSE<=1);
9871 match(Set dst (CosD src));
9872 ins_cost(1800);
9873 format %{ "DCOS $dst" %}
9874 opcode(0xD9, 0xFF);
9875 ins_encode( OpcP, OpcS );
9876 ins_pipe( pipe_slow );
9877 %}
9879 instruct cosD_reg(regD dst, eFlagsReg cr) %{
9880 predicate (UseSSE>=2);
9881 match(Set dst (CosD dst));
9882 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9883 ins_cost(1800);
9884 format %{ "DCOS $dst" %}
9885 opcode(0xD9, 0xFF);
9886 ins_encode( Push_SrcD(dst), OpcP, OpcS, Push_ResultD(dst) );
9887 ins_pipe( pipe_slow );
9888 %}
9890 instruct tanDPR_reg(regDPR1 dst, regDPR1 src) %{
9891 predicate (UseSSE<=1);
9892 match(Set dst(TanD src));
9893 format %{ "DTAN $dst" %}
9894 ins_encode( Opcode(0xD9), Opcode(0xF2), // fptan
9895 Opcode(0xDD), Opcode(0xD8)); // fstp st
9896 ins_pipe( pipe_slow );
9897 %}
9899 instruct tanD_reg(regD dst, eFlagsReg cr) %{
9900 predicate (UseSSE>=2);
9901 match(Set dst(TanD dst));
9902 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9903 format %{ "DTAN $dst" %}
9904 ins_encode( Push_SrcD(dst),
9905 Opcode(0xD9), Opcode(0xF2), // fptan
9906 Opcode(0xDD), Opcode(0xD8), // fstp st
9907 Push_ResultD(dst) );
9908 ins_pipe( pipe_slow );
9909 %}
9911 instruct atanDPR_reg(regDPR dst, regDPR src) %{
9912 predicate (UseSSE<=1);
9913 match(Set dst(AtanD dst src));
9914 format %{ "DATA $dst,$src" %}
9915 opcode(0xD9, 0xF3);
9916 ins_encode( Push_Reg_DPR(src),
9917 OpcP, OpcS, RegOpc(dst) );
9918 ins_pipe( pipe_slow );
9919 %}
9921 instruct atanD_reg(regD dst, regD src, eFlagsReg cr) %{
9922 predicate (UseSSE>=2);
9923 match(Set dst(AtanD dst src));
9924 effect(KILL cr); // Push_{Src|Result}D() uses "{SUB|ADD} ESP,8"
9925 format %{ "DATA $dst,$src" %}
9926 opcode(0xD9, 0xF3);
9927 ins_encode( Push_SrcD(src),
9928 OpcP, OpcS, Push_ResultD(dst) );
9929 ins_pipe( pipe_slow );
9930 %}
9932 instruct sqrtDPR_reg(regDPR dst, regDPR src) %{
9933 predicate (UseSSE<=1);
9934 match(Set dst (SqrtD src));
9935 format %{ "DSQRT $dst,$src" %}
9936 opcode(0xFA, 0xD9);
9937 ins_encode( Push_Reg_DPR(src),
9938 OpcS, OpcP, Pop_Reg_DPR(dst) );
9939 ins_pipe( pipe_slow );
9940 %}
9942 instruct powDPR_reg(regDPR X, regDPR1 Y, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9943 predicate (UseSSE<=1);
9944 match(Set Y (PowD X Y)); // Raise X to the Yth power
9945 effect(KILL rax, KILL rdx, KILL rcx, KILL cr);
9946 format %{ "fast_pow $X $Y -> $Y // KILL $rax, $rcx, $rdx" %}
9947 ins_encode %{
9948 __ subptr(rsp, 8);
9949 __ fld_s($X$$reg - 1);
9950 __ fast_pow();
9951 __ addptr(rsp, 8);
9952 %}
9953 ins_pipe( pipe_slow );
9954 %}
9956 instruct powD_reg(regD dst, regD src0, regD src1, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9957 predicate (UseSSE>=2);
9958 match(Set dst (PowD src0 src1)); // Raise src0 to the src1'th power
9959 effect(KILL rax, KILL rdx, KILL rcx, KILL cr);
9960 format %{ "fast_pow $src0 $src1 -> $dst // KILL $rax, $rcx, $rdx" %}
9961 ins_encode %{
9962 __ subptr(rsp, 8);
9963 __ movdbl(Address(rsp, 0), $src1$$XMMRegister);
9964 __ fld_d(Address(rsp, 0));
9965 __ movdbl(Address(rsp, 0), $src0$$XMMRegister);
9966 __ fld_d(Address(rsp, 0));
9967 __ fast_pow();
9968 __ fstp_d(Address(rsp, 0));
9969 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
9970 __ addptr(rsp, 8);
9971 %}
9972 ins_pipe( pipe_slow );
9973 %}
9976 instruct expDPR_reg(regDPR1 dpr1, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9977 predicate (UseSSE<=1);
9978 match(Set dpr1 (ExpD dpr1));
9979 effect(KILL rax, KILL rcx, KILL rdx, KILL cr);
9980 format %{ "fast_exp $dpr1 -> $dpr1 // KILL $rax, $rcx, $rdx" %}
9981 ins_encode %{
9982 __ fast_exp();
9983 %}
9984 ins_pipe( pipe_slow );
9985 %}
9987 instruct expD_reg(regD dst, regD src, eAXRegI rax, eDXRegI rdx, eCXRegI rcx, eFlagsReg cr) %{
9988 predicate (UseSSE>=2);
9989 match(Set dst (ExpD src));
9990 effect(KILL rax, KILL rcx, KILL rdx, KILL cr);
9991 format %{ "fast_exp $dst -> $src // KILL $rax, $rcx, $rdx" %}
9992 ins_encode %{
9993 __ subptr(rsp, 8);
9994 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
9995 __ fld_d(Address(rsp, 0));
9996 __ fast_exp();
9997 __ fstp_d(Address(rsp, 0));
9998 __ movdbl($dst$$XMMRegister, Address(rsp, 0));
9999 __ addptr(rsp, 8);
10000 %}
10001 ins_pipe( pipe_slow );
10002 %}
10004 instruct log10DPR_reg(regDPR1 dst, regDPR1 src) %{
10005 predicate (UseSSE<=1);
10006 // The source Double operand on FPU stack
10007 match(Set dst (Log10D src));
10008 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10009 // fxch ; swap ST(0) with ST(1)
10010 // fyl2x ; compute log_10(2) * log_2(x)
10011 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10012 "FXCH \n\t"
10013 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10014 %}
10015 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10016 Opcode(0xD9), Opcode(0xC9), // fxch
10017 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10019 ins_pipe( pipe_slow );
10020 %}
10022 instruct log10D_reg(regD dst, regD src, eFlagsReg cr) %{
10023 predicate (UseSSE>=2);
10024 effect(KILL cr);
10025 match(Set dst (Log10D src));
10026 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10027 // fyl2x ; compute log_10(2) * log_2(x)
10028 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10029 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10030 %}
10031 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10032 Push_SrcD(src),
10033 Opcode(0xD9), Opcode(0xF1), // fyl2x
10034 Push_ResultD(dst));
10036 ins_pipe( pipe_slow );
10037 %}
10039 instruct logDPR_reg(regDPR1 dst, regDPR1 src) %{
10040 predicate (UseSSE<=1);
10041 // The source Double operand on FPU stack
10042 match(Set dst (LogD src));
10043 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10044 // fxch ; swap ST(0) with ST(1)
10045 // fyl2x ; compute log_e(2) * log_2(x)
10046 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10047 "FXCH \n\t"
10048 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10049 %}
10050 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10051 Opcode(0xD9), Opcode(0xC9), // fxch
10052 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10054 ins_pipe( pipe_slow );
10055 %}
10057 instruct logD_reg(regD dst, regD src, eFlagsReg cr) %{
10058 predicate (UseSSE>=2);
10059 effect(KILL cr);
10060 // The source and result Double operands in XMM registers
10061 match(Set dst (LogD src));
10062 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10063 // fyl2x ; compute log_e(2) * log_2(x)
10064 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10065 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10066 %}
10067 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10068 Push_SrcD(src),
10069 Opcode(0xD9), Opcode(0xF1), // fyl2x
10070 Push_ResultD(dst));
10071 ins_pipe( pipe_slow );
10072 %}
10074 //-------------Float Instructions-------------------------------
10075 // Float Math
10077 // Code for float compare:
10078 // fcompp();
10079 // fwait(); fnstsw_ax();
10080 // sahf();
10081 // movl(dst, unordered_result);
10082 // jcc(Assembler::parity, exit);
10083 // movl(dst, less_result);
10084 // jcc(Assembler::below, exit);
10085 // movl(dst, equal_result);
10086 // jcc(Assembler::equal, exit);
10087 // movl(dst, greater_result);
10088 // exit:
10090 // P6 version of float compare, sets condition codes in EFLAGS
10091 instruct cmpFPR_cc_P6(eFlagsRegU cr, regFPR src1, regFPR src2, eAXRegI rax) %{
10092 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10093 match(Set cr (CmpF src1 src2));
10094 effect(KILL rax);
10095 ins_cost(150);
10096 format %{ "FLD $src1\n\t"
10097 "FUCOMIP ST,$src2 // P6 instruction\n\t"
10098 "JNP exit\n\t"
10099 "MOV ah,1 // saw a NaN, set CF (treat as LT)\n\t"
10100 "SAHF\n"
10101 "exit:\tNOP // avoid branch to branch" %}
10102 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10103 ins_encode( Push_Reg_DPR(src1),
10104 OpcP, RegOpc(src2),
10105 cmpF_P6_fixup );
10106 ins_pipe( pipe_slow );
10107 %}
10109 instruct cmpFPR_cc_P6CF(eFlagsRegUCF cr, regFPR src1, regFPR src2) %{
10110 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10111 match(Set cr (CmpF src1 src2));
10112 ins_cost(100);
10113 format %{ "FLD $src1\n\t"
10114 "FUCOMIP ST,$src2 // P6 instruction" %}
10115 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10116 ins_encode( Push_Reg_DPR(src1),
10117 OpcP, RegOpc(src2));
10118 ins_pipe( pipe_slow );
10119 %}
10122 // Compare & branch
10123 instruct cmpFPR_cc(eFlagsRegU cr, regFPR src1, regFPR src2, eAXRegI rax) %{
10124 predicate(UseSSE == 0);
10125 match(Set cr (CmpF src1 src2));
10126 effect(KILL rax);
10127 ins_cost(200);
10128 format %{ "FLD $src1\n\t"
10129 "FCOMp $src2\n\t"
10130 "FNSTSW AX\n\t"
10131 "TEST AX,0x400\n\t"
10132 "JZ,s flags\n\t"
10133 "MOV AH,1\t# unordered treat as LT\n"
10134 "flags:\tSAHF" %}
10135 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10136 ins_encode( Push_Reg_DPR(src1),
10137 OpcP, RegOpc(src2),
10138 fpu_flags);
10139 ins_pipe( pipe_slow );
10140 %}
10142 // Compare vs zero into -1,0,1
10143 instruct cmpFPR_0(rRegI dst, regFPR src1, immFPR0 zero, eAXRegI rax, eFlagsReg cr) %{
10144 predicate(UseSSE == 0);
10145 match(Set dst (CmpF3 src1 zero));
10146 effect(KILL cr, KILL rax);
10147 ins_cost(280);
10148 format %{ "FTSTF $dst,$src1" %}
10149 opcode(0xE4, 0xD9);
10150 ins_encode( Push_Reg_DPR(src1),
10151 OpcS, OpcP, PopFPU,
10152 CmpF_Result(dst));
10153 ins_pipe( pipe_slow );
10154 %}
10156 // Compare into -1,0,1
10157 instruct cmpFPR_reg(rRegI dst, regFPR src1, regFPR src2, eAXRegI rax, eFlagsReg cr) %{
10158 predicate(UseSSE == 0);
10159 match(Set dst (CmpF3 src1 src2));
10160 effect(KILL cr, KILL rax);
10161 ins_cost(300);
10162 format %{ "FCMPF $dst,$src1,$src2" %}
10163 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10164 ins_encode( Push_Reg_DPR(src1),
10165 OpcP, RegOpc(src2),
10166 CmpF_Result(dst));
10167 ins_pipe( pipe_slow );
10168 %}
10170 // float compare and set condition codes in EFLAGS by XMM regs
10171 instruct cmpF_cc(eFlagsRegU cr, regF src1, regF src2) %{
10172 predicate(UseSSE>=1);
10173 match(Set cr (CmpF src1 src2));
10174 ins_cost(145);
10175 format %{ "UCOMISS $src1,$src2\n\t"
10176 "JNP,s exit\n\t"
10177 "PUSHF\t# saw NaN, set CF\n\t"
10178 "AND [rsp], #0xffffff2b\n\t"
10179 "POPF\n"
10180 "exit:" %}
10181 ins_encode %{
10182 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10183 emit_cmpfp_fixup(_masm);
10184 %}
10185 ins_pipe( pipe_slow );
10186 %}
10188 instruct cmpF_ccCF(eFlagsRegUCF cr, regF src1, regF src2) %{
10189 predicate(UseSSE>=1);
10190 match(Set cr (CmpF src1 src2));
10191 ins_cost(100);
10192 format %{ "UCOMISS $src1,$src2" %}
10193 ins_encode %{
10194 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10195 %}
10196 ins_pipe( pipe_slow );
10197 %}
10199 // float compare and set condition codes in EFLAGS by XMM regs
10200 instruct cmpF_ccmem(eFlagsRegU cr, regF src1, memory src2) %{
10201 predicate(UseSSE>=1);
10202 match(Set cr (CmpF src1 (LoadF src2)));
10203 ins_cost(165);
10204 format %{ "UCOMISS $src1,$src2\n\t"
10205 "JNP,s exit\n\t"
10206 "PUSHF\t# saw NaN, set CF\n\t"
10207 "AND [rsp], #0xffffff2b\n\t"
10208 "POPF\n"
10209 "exit:" %}
10210 ins_encode %{
10211 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10212 emit_cmpfp_fixup(_masm);
10213 %}
10214 ins_pipe( pipe_slow );
10215 %}
10217 instruct cmpF_ccmemCF(eFlagsRegUCF cr, regF src1, memory src2) %{
10218 predicate(UseSSE>=1);
10219 match(Set cr (CmpF src1 (LoadF src2)));
10220 ins_cost(100);
10221 format %{ "UCOMISS $src1,$src2" %}
10222 ins_encode %{
10223 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10224 %}
10225 ins_pipe( pipe_slow );
10226 %}
10228 // Compare into -1,0,1 in XMM
10229 instruct cmpF_reg(xRegI dst, regF src1, regF src2, eFlagsReg cr) %{
10230 predicate(UseSSE>=1);
10231 match(Set dst (CmpF3 src1 src2));
10232 effect(KILL cr);
10233 ins_cost(255);
10234 format %{ "UCOMISS $src1, $src2\n\t"
10235 "MOV $dst, #-1\n\t"
10236 "JP,s done\n\t"
10237 "JB,s done\n\t"
10238 "SETNE $dst\n\t"
10239 "MOVZB $dst, $dst\n"
10240 "done:" %}
10241 ins_encode %{
10242 __ ucomiss($src1$$XMMRegister, $src2$$XMMRegister);
10243 emit_cmpfp3(_masm, $dst$$Register);
10244 %}
10245 ins_pipe( pipe_slow );
10246 %}
10248 // Compare into -1,0,1 in XMM and memory
10249 instruct cmpF_regmem(xRegI dst, regF src1, memory src2, eFlagsReg cr) %{
10250 predicate(UseSSE>=1);
10251 match(Set dst (CmpF3 src1 (LoadF src2)));
10252 effect(KILL cr);
10253 ins_cost(275);
10254 format %{ "UCOMISS $src1, $src2\n\t"
10255 "MOV $dst, #-1\n\t"
10256 "JP,s done\n\t"
10257 "JB,s done\n\t"
10258 "SETNE $dst\n\t"
10259 "MOVZB $dst, $dst\n"
10260 "done:" %}
10261 ins_encode %{
10262 __ ucomiss($src1$$XMMRegister, $src2$$Address);
10263 emit_cmpfp3(_masm, $dst$$Register);
10264 %}
10265 ins_pipe( pipe_slow );
10266 %}
10268 // Spill to obtain 24-bit precision
10269 instruct subFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10270 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10271 match(Set dst (SubF src1 src2));
10273 format %{ "FSUB $dst,$src1 - $src2" %}
10274 opcode(0xD8, 0x4); /* D8 E0+i or D8 /4 mod==0x3 ;; result in TOS */
10275 ins_encode( Push_Reg_FPR(src1),
10276 OpcReg_FPR(src2),
10277 Pop_Mem_FPR(dst) );
10278 ins_pipe( fpu_mem_reg_reg );
10279 %}
10280 //
10281 // This instruction does not round to 24-bits
10282 instruct subFPR_reg(regFPR dst, regFPR src) %{
10283 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10284 match(Set dst (SubF dst src));
10286 format %{ "FSUB $dst,$src" %}
10287 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
10288 ins_encode( Push_Reg_FPR(src),
10289 OpcP, RegOpc(dst) );
10290 ins_pipe( fpu_reg_reg );
10291 %}
10293 // Spill to obtain 24-bit precision
10294 instruct addFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10295 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10296 match(Set dst (AddF src1 src2));
10298 format %{ "FADD $dst,$src1,$src2" %}
10299 opcode(0xD8, 0x0); /* D8 C0+i */
10300 ins_encode( Push_Reg_FPR(src2),
10301 OpcReg_FPR(src1),
10302 Pop_Mem_FPR(dst) );
10303 ins_pipe( fpu_mem_reg_reg );
10304 %}
10305 //
10306 // This instruction does not round to 24-bits
10307 instruct addFPR_reg(regFPR dst, regFPR src) %{
10308 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10309 match(Set dst (AddF dst src));
10311 format %{ "FLD $src\n\t"
10312 "FADDp $dst,ST" %}
10313 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
10314 ins_encode( Push_Reg_FPR(src),
10315 OpcP, RegOpc(dst) );
10316 ins_pipe( fpu_reg_reg );
10317 %}
10319 instruct absFPR_reg(regFPR1 dst, regFPR1 src) %{
10320 predicate(UseSSE==0);
10321 match(Set dst (AbsF src));
10322 ins_cost(100);
10323 format %{ "FABS" %}
10324 opcode(0xE1, 0xD9);
10325 ins_encode( OpcS, OpcP );
10326 ins_pipe( fpu_reg_reg );
10327 %}
10329 instruct negFPR_reg(regFPR1 dst, regFPR1 src) %{
10330 predicate(UseSSE==0);
10331 match(Set dst (NegF src));
10332 ins_cost(100);
10333 format %{ "FCHS" %}
10334 opcode(0xE0, 0xD9);
10335 ins_encode( OpcS, OpcP );
10336 ins_pipe( fpu_reg_reg );
10337 %}
10339 // Cisc-alternate to addFPR_reg
10340 // Spill to obtain 24-bit precision
10341 instruct addFPR24_reg_mem(stackSlotF dst, regFPR src1, memory src2) %{
10342 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10343 match(Set dst (AddF src1 (LoadF src2)));
10345 format %{ "FLD $src2\n\t"
10346 "FADD ST,$src1\n\t"
10347 "FSTP_S $dst" %}
10348 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10349 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10350 OpcReg_FPR(src1),
10351 Pop_Mem_FPR(dst) );
10352 ins_pipe( fpu_mem_reg_mem );
10353 %}
10354 //
10355 // Cisc-alternate to addFPR_reg
10356 // This instruction does not round to 24-bits
10357 instruct addFPR_reg_mem(regFPR dst, memory src) %{
10358 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10359 match(Set dst (AddF dst (LoadF src)));
10361 format %{ "FADD $dst,$src" %}
10362 opcode(0xDE, 0x0, 0xD9); /* DE C0+i or DE /0*/ /* LoadF D9 /0 */
10363 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10364 OpcP, RegOpc(dst) );
10365 ins_pipe( fpu_reg_mem );
10366 %}
10368 // // Following two instructions for _222_mpegaudio
10369 // Spill to obtain 24-bit precision
10370 instruct addFPR24_mem_reg(stackSlotF dst, regFPR src2, memory src1 ) %{
10371 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10372 match(Set dst (AddF src1 src2));
10374 format %{ "FADD $dst,$src1,$src2" %}
10375 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10376 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src1),
10377 OpcReg_FPR(src2),
10378 Pop_Mem_FPR(dst) );
10379 ins_pipe( fpu_mem_reg_mem );
10380 %}
10382 // Cisc-spill variant
10383 // Spill to obtain 24-bit precision
10384 instruct addFPR24_mem_cisc(stackSlotF dst, memory src1, memory src2) %{
10385 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10386 match(Set dst (AddF src1 (LoadF src2)));
10388 format %{ "FADD $dst,$src1,$src2 cisc" %}
10389 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
10390 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10391 set_instruction_start,
10392 OpcP, RMopc_Mem(secondary,src1),
10393 Pop_Mem_FPR(dst) );
10394 ins_pipe( fpu_mem_mem_mem );
10395 %}
10397 // Spill to obtain 24-bit precision
10398 instruct addFPR24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
10399 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10400 match(Set dst (AddF src1 src2));
10402 format %{ "FADD $dst,$src1,$src2" %}
10403 opcode(0xD8, 0x0, 0xD9); /* D8 /0 */ /* LoadF D9 /0 */
10404 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10405 set_instruction_start,
10406 OpcP, RMopc_Mem(secondary,src1),
10407 Pop_Mem_FPR(dst) );
10408 ins_pipe( fpu_mem_mem_mem );
10409 %}
10412 // Spill to obtain 24-bit precision
10413 instruct addFPR24_reg_imm(stackSlotF dst, regFPR src, immFPR con) %{
10414 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10415 match(Set dst (AddF src con));
10416 format %{ "FLD $src\n\t"
10417 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10418 "FSTP_S $dst" %}
10419 ins_encode %{
10420 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10421 __ fadd_s($constantaddress($con));
10422 __ fstp_s(Address(rsp, $dst$$disp));
10423 %}
10424 ins_pipe(fpu_mem_reg_con);
10425 %}
10426 //
10427 // This instruction does not round to 24-bits
10428 instruct addFPR_reg_imm(regFPR dst, regFPR src, immFPR con) %{
10429 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10430 match(Set dst (AddF src con));
10431 format %{ "FLD $src\n\t"
10432 "FADD_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10433 "FSTP $dst" %}
10434 ins_encode %{
10435 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10436 __ fadd_s($constantaddress($con));
10437 __ fstp_d($dst$$reg);
10438 %}
10439 ins_pipe(fpu_reg_reg_con);
10440 %}
10442 // Spill to obtain 24-bit precision
10443 instruct mulFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10444 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10445 match(Set dst (MulF src1 src2));
10447 format %{ "FLD $src1\n\t"
10448 "FMUL $src2\n\t"
10449 "FSTP_S $dst" %}
10450 opcode(0xD8, 0x1); /* D8 C8+i or D8 /1 ;; result in TOS */
10451 ins_encode( Push_Reg_FPR(src1),
10452 OpcReg_FPR(src2),
10453 Pop_Mem_FPR(dst) );
10454 ins_pipe( fpu_mem_reg_reg );
10455 %}
10456 //
10457 // This instruction does not round to 24-bits
10458 instruct mulFPR_reg(regFPR dst, regFPR src1, regFPR src2) %{
10459 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10460 match(Set dst (MulF src1 src2));
10462 format %{ "FLD $src1\n\t"
10463 "FMUL $src2\n\t"
10464 "FSTP_S $dst" %}
10465 opcode(0xD8, 0x1); /* D8 C8+i */
10466 ins_encode( Push_Reg_FPR(src2),
10467 OpcReg_FPR(src1),
10468 Pop_Reg_FPR(dst) );
10469 ins_pipe( fpu_reg_reg_reg );
10470 %}
10473 // Spill to obtain 24-bit precision
10474 // Cisc-alternate to reg-reg multiply
10475 instruct mulFPR24_reg_mem(stackSlotF dst, regFPR src1, memory src2) %{
10476 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10477 match(Set dst (MulF src1 (LoadF src2)));
10479 format %{ "FLD_S $src2\n\t"
10480 "FMUL $src1\n\t"
10481 "FSTP_S $dst" %}
10482 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or DE /1*/ /* LoadF D9 /0 */
10483 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10484 OpcReg_FPR(src1),
10485 Pop_Mem_FPR(dst) );
10486 ins_pipe( fpu_mem_reg_mem );
10487 %}
10488 //
10489 // This instruction does not round to 24-bits
10490 // Cisc-alternate to reg-reg multiply
10491 instruct mulFPR_reg_mem(regFPR dst, regFPR src1, memory src2) %{
10492 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10493 match(Set dst (MulF src1 (LoadF src2)));
10495 format %{ "FMUL $dst,$src1,$src2" %}
10496 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadF D9 /0 */
10497 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10498 OpcReg_FPR(src1),
10499 Pop_Reg_FPR(dst) );
10500 ins_pipe( fpu_reg_reg_mem );
10501 %}
10503 // Spill to obtain 24-bit precision
10504 instruct mulFPR24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
10505 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10506 match(Set dst (MulF src1 src2));
10508 format %{ "FMUL $dst,$src1,$src2" %}
10509 opcode(0xD8, 0x1, 0xD9); /* D8 /1 */ /* LoadF D9 /0 */
10510 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
10511 set_instruction_start,
10512 OpcP, RMopc_Mem(secondary,src1),
10513 Pop_Mem_FPR(dst) );
10514 ins_pipe( fpu_mem_mem_mem );
10515 %}
10517 // Spill to obtain 24-bit precision
10518 instruct mulFPR24_reg_imm(stackSlotF dst, regFPR src, immFPR con) %{
10519 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10520 match(Set dst (MulF src con));
10522 format %{ "FLD $src\n\t"
10523 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10524 "FSTP_S $dst" %}
10525 ins_encode %{
10526 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10527 __ fmul_s($constantaddress($con));
10528 __ fstp_s(Address(rsp, $dst$$disp));
10529 %}
10530 ins_pipe(fpu_mem_reg_con);
10531 %}
10532 //
10533 // This instruction does not round to 24-bits
10534 instruct mulFPR_reg_imm(regFPR dst, regFPR src, immFPR con) %{
10535 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10536 match(Set dst (MulF src con));
10538 format %{ "FLD $src\n\t"
10539 "FMUL_S [$constantaddress]\t# load from constant table: float=$con\n\t"
10540 "FSTP $dst" %}
10541 ins_encode %{
10542 __ fld_s($src$$reg - 1); // FLD ST(i-1)
10543 __ fmul_s($constantaddress($con));
10544 __ fstp_d($dst$$reg);
10545 %}
10546 ins_pipe(fpu_reg_reg_con);
10547 %}
10550 //
10551 // MACRO1 -- subsume unshared load into mulFPR
10552 // This instruction does not round to 24-bits
10553 instruct mulFPR_reg_load1(regFPR dst, regFPR src, memory mem1 ) %{
10554 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10555 match(Set dst (MulF (LoadF mem1) src));
10557 format %{ "FLD $mem1 ===MACRO1===\n\t"
10558 "FMUL ST,$src\n\t"
10559 "FSTP $dst" %}
10560 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or D8 /1 */ /* LoadF D9 /0 */
10561 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem1),
10562 OpcReg_FPR(src),
10563 Pop_Reg_FPR(dst) );
10564 ins_pipe( fpu_reg_reg_mem );
10565 %}
10566 //
10567 // MACRO2 -- addFPR a mulFPR which subsumed an unshared load
10568 // This instruction does not round to 24-bits
10569 instruct addFPR_mulFPR_reg_load1(regFPR dst, memory mem1, regFPR src1, regFPR src2) %{
10570 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10571 match(Set dst (AddF (MulF (LoadF mem1) src1) src2));
10572 ins_cost(95);
10574 format %{ "FLD $mem1 ===MACRO2===\n\t"
10575 "FMUL ST,$src1 subsume mulFPR left load\n\t"
10576 "FADD ST,$src2\n\t"
10577 "FSTP $dst" %}
10578 opcode(0xD9); /* LoadF D9 /0 */
10579 ins_encode( OpcP, RMopc_Mem(0x00,mem1),
10580 FMul_ST_reg(src1),
10581 FAdd_ST_reg(src2),
10582 Pop_Reg_FPR(dst) );
10583 ins_pipe( fpu_reg_mem_reg_reg );
10584 %}
10586 // MACRO3 -- addFPR a mulFPR
10587 // This instruction does not round to 24-bits. It is a '2-address'
10588 // instruction in that the result goes back to src2. This eliminates
10589 // a move from the macro; possibly the register allocator will have
10590 // to add it back (and maybe not).
10591 instruct addFPR_mulFPR_reg(regFPR src2, regFPR src1, regFPR src0) %{
10592 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10593 match(Set src2 (AddF (MulF src0 src1) src2));
10595 format %{ "FLD $src0 ===MACRO3===\n\t"
10596 "FMUL ST,$src1\n\t"
10597 "FADDP $src2,ST" %}
10598 opcode(0xD9); /* LoadF D9 /0 */
10599 ins_encode( Push_Reg_FPR(src0),
10600 FMul_ST_reg(src1),
10601 FAddP_reg_ST(src2) );
10602 ins_pipe( fpu_reg_reg_reg );
10603 %}
10605 // MACRO4 -- divFPR subFPR
10606 // This instruction does not round to 24-bits
10607 instruct subFPR_divFPR_reg(regFPR dst, regFPR src1, regFPR src2, regFPR src3) %{
10608 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10609 match(Set dst (DivF (SubF src2 src1) src3));
10611 format %{ "FLD $src2 ===MACRO4===\n\t"
10612 "FSUB ST,$src1\n\t"
10613 "FDIV ST,$src3\n\t"
10614 "FSTP $dst" %}
10615 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10616 ins_encode( Push_Reg_FPR(src2),
10617 subFPR_divFPR_encode(src1,src3),
10618 Pop_Reg_FPR(dst) );
10619 ins_pipe( fpu_reg_reg_reg_reg );
10620 %}
10622 // Spill to obtain 24-bit precision
10623 instruct divFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2) %{
10624 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10625 match(Set dst (DivF src1 src2));
10627 format %{ "FDIV $dst,$src1,$src2" %}
10628 opcode(0xD8, 0x6); /* D8 F0+i or DE /6*/
10629 ins_encode( Push_Reg_FPR(src1),
10630 OpcReg_FPR(src2),
10631 Pop_Mem_FPR(dst) );
10632 ins_pipe( fpu_mem_reg_reg );
10633 %}
10634 //
10635 // This instruction does not round to 24-bits
10636 instruct divFPR_reg(regFPR dst, regFPR src) %{
10637 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10638 match(Set dst (DivF dst src));
10640 format %{ "FDIV $dst,$src" %}
10641 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10642 ins_encode( Push_Reg_FPR(src),
10643 OpcP, RegOpc(dst) );
10644 ins_pipe( fpu_reg_reg );
10645 %}
10648 // Spill to obtain 24-bit precision
10649 instruct modFPR24_reg(stackSlotF dst, regFPR src1, regFPR src2, eAXRegI rax, eFlagsReg cr) %{
10650 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
10651 match(Set dst (ModF src1 src2));
10652 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
10654 format %{ "FMOD $dst,$src1,$src2" %}
10655 ins_encode( Push_Reg_Mod_DPR(src1, src2),
10656 emitModDPR(),
10657 Push_Result_Mod_DPR(src2),
10658 Pop_Mem_FPR(dst));
10659 ins_pipe( pipe_slow );
10660 %}
10661 //
10662 // This instruction does not round to 24-bits
10663 instruct modFPR_reg(regFPR dst, regFPR src, eAXRegI rax, eFlagsReg cr) %{
10664 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
10665 match(Set dst (ModF dst src));
10666 effect(KILL rax, KILL cr); // emitModDPR() uses EAX and EFLAGS
10668 format %{ "FMOD $dst,$src" %}
10669 ins_encode(Push_Reg_Mod_DPR(dst, src),
10670 emitModDPR(),
10671 Push_Result_Mod_DPR(src),
10672 Pop_Reg_FPR(dst));
10673 ins_pipe( pipe_slow );
10674 %}
10676 instruct modF_reg(regF dst, regF src0, regF src1, eAXRegI rax, eFlagsReg cr) %{
10677 predicate(UseSSE>=1);
10678 match(Set dst (ModF src0 src1));
10679 effect(KILL rax, KILL cr);
10680 format %{ "SUB ESP,4\t # FMOD\n"
10681 "\tMOVSS [ESP+0],$src1\n"
10682 "\tFLD_S [ESP+0]\n"
10683 "\tMOVSS [ESP+0],$src0\n"
10684 "\tFLD_S [ESP+0]\n"
10685 "loop:\tFPREM\n"
10686 "\tFWAIT\n"
10687 "\tFNSTSW AX\n"
10688 "\tSAHF\n"
10689 "\tJP loop\n"
10690 "\tFSTP_S [ESP+0]\n"
10691 "\tMOVSS $dst,[ESP+0]\n"
10692 "\tADD ESP,4\n"
10693 "\tFSTP ST0\t # Restore FPU Stack"
10694 %}
10695 ins_cost(250);
10696 ins_encode( Push_ModF_encoding(src0, src1), emitModDPR(), Push_ResultF(dst,0x4), PopFPU);
10697 ins_pipe( pipe_slow );
10698 %}
10701 //----------Arithmetic Conversion Instructions---------------------------------
10702 // The conversions operations are all Alpha sorted. Please keep it that way!
10704 instruct roundFloat_mem_reg(stackSlotF dst, regFPR src) %{
10705 predicate(UseSSE==0);
10706 match(Set dst (RoundFloat src));
10707 ins_cost(125);
10708 format %{ "FST_S $dst,$src\t# F-round" %}
10709 ins_encode( Pop_Mem_Reg_FPR(dst, src) );
10710 ins_pipe( fpu_mem_reg );
10711 %}
10713 instruct roundDouble_mem_reg(stackSlotD dst, regDPR src) %{
10714 predicate(UseSSE<=1);
10715 match(Set dst (RoundDouble src));
10716 ins_cost(125);
10717 format %{ "FST_D $dst,$src\t# D-round" %}
10718 ins_encode( Pop_Mem_Reg_DPR(dst, src) );
10719 ins_pipe( fpu_mem_reg );
10720 %}
10722 // Force rounding to 24-bit precision and 6-bit exponent
10723 instruct convDPR2FPR_reg(stackSlotF dst, regDPR src) %{
10724 predicate(UseSSE==0);
10725 match(Set dst (ConvD2F src));
10726 format %{ "FST_S $dst,$src\t# F-round" %}
10727 expand %{
10728 roundFloat_mem_reg(dst,src);
10729 %}
10730 %}
10732 // Force rounding to 24-bit precision and 6-bit exponent
10733 instruct convDPR2F_reg(regF dst, regDPR src, eFlagsReg cr) %{
10734 predicate(UseSSE==1);
10735 match(Set dst (ConvD2F src));
10736 effect( KILL cr );
10737 format %{ "SUB ESP,4\n\t"
10738 "FST_S [ESP],$src\t# F-round\n\t"
10739 "MOVSS $dst,[ESP]\n\t"
10740 "ADD ESP,4" %}
10741 ins_encode %{
10742 __ subptr(rsp, 4);
10743 if ($src$$reg != FPR1L_enc) {
10744 __ fld_s($src$$reg-1);
10745 __ fstp_s(Address(rsp, 0));
10746 } else {
10747 __ fst_s(Address(rsp, 0));
10748 }
10749 __ movflt($dst$$XMMRegister, Address(rsp, 0));
10750 __ addptr(rsp, 4);
10751 %}
10752 ins_pipe( pipe_slow );
10753 %}
10755 // Force rounding double precision to single precision
10756 instruct convD2F_reg(regF dst, regD src) %{
10757 predicate(UseSSE>=2);
10758 match(Set dst (ConvD2F src));
10759 format %{ "CVTSD2SS $dst,$src\t# F-round" %}
10760 ins_encode %{
10761 __ cvtsd2ss ($dst$$XMMRegister, $src$$XMMRegister);
10762 %}
10763 ins_pipe( pipe_slow );
10764 %}
10766 instruct convFPR2DPR_reg_reg(regDPR dst, regFPR src) %{
10767 predicate(UseSSE==0);
10768 match(Set dst (ConvF2D src));
10769 format %{ "FST_S $dst,$src\t# D-round" %}
10770 ins_encode( Pop_Reg_Reg_DPR(dst, src));
10771 ins_pipe( fpu_reg_reg );
10772 %}
10774 instruct convFPR2D_reg(stackSlotD dst, regFPR src) %{
10775 predicate(UseSSE==1);
10776 match(Set dst (ConvF2D src));
10777 format %{ "FST_D $dst,$src\t# D-round" %}
10778 expand %{
10779 roundDouble_mem_reg(dst,src);
10780 %}
10781 %}
10783 instruct convF2DPR_reg(regDPR dst, regF src, eFlagsReg cr) %{
10784 predicate(UseSSE==1);
10785 match(Set dst (ConvF2D src));
10786 effect( KILL cr );
10787 format %{ "SUB ESP,4\n\t"
10788 "MOVSS [ESP] $src\n\t"
10789 "FLD_S [ESP]\n\t"
10790 "ADD ESP,4\n\t"
10791 "FSTP $dst\t# D-round" %}
10792 ins_encode %{
10793 __ subptr(rsp, 4);
10794 __ movflt(Address(rsp, 0), $src$$XMMRegister);
10795 __ fld_s(Address(rsp, 0));
10796 __ addptr(rsp, 4);
10797 __ fstp_d($dst$$reg);
10798 %}
10799 ins_pipe( pipe_slow );
10800 %}
10802 instruct convF2D_reg(regD dst, regF src) %{
10803 predicate(UseSSE>=2);
10804 match(Set dst (ConvF2D src));
10805 format %{ "CVTSS2SD $dst,$src\t# D-round" %}
10806 ins_encode %{
10807 __ cvtss2sd ($dst$$XMMRegister, $src$$XMMRegister);
10808 %}
10809 ins_pipe( pipe_slow );
10810 %}
10812 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
10813 instruct convDPR2I_reg_reg( eAXRegI dst, eDXRegI tmp, regDPR src, eFlagsReg cr ) %{
10814 predicate(UseSSE<=1);
10815 match(Set dst (ConvD2I src));
10816 effect( KILL tmp, KILL cr );
10817 format %{ "FLD $src\t# Convert double to int \n\t"
10818 "FLDCW trunc mode\n\t"
10819 "SUB ESP,4\n\t"
10820 "FISTp [ESP + #0]\n\t"
10821 "FLDCW std/24-bit mode\n\t"
10822 "POP EAX\n\t"
10823 "CMP EAX,0x80000000\n\t"
10824 "JNE,s fast\n\t"
10825 "FLD_D $src\n\t"
10826 "CALL d2i_wrapper\n"
10827 "fast:" %}
10828 ins_encode( Push_Reg_DPR(src), DPR2I_encoding(src) );
10829 ins_pipe( pipe_slow );
10830 %}
10832 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
10833 instruct convD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regD src, eFlagsReg cr ) %{
10834 predicate(UseSSE>=2);
10835 match(Set dst (ConvD2I src));
10836 effect( KILL tmp, KILL cr );
10837 format %{ "CVTTSD2SI $dst, $src\n\t"
10838 "CMP $dst,0x80000000\n\t"
10839 "JNE,s fast\n\t"
10840 "SUB ESP, 8\n\t"
10841 "MOVSD [ESP], $src\n\t"
10842 "FLD_D [ESP]\n\t"
10843 "ADD ESP, 8\n\t"
10844 "CALL d2i_wrapper\n"
10845 "fast:" %}
10846 ins_encode %{
10847 Label fast;
10848 __ cvttsd2sil($dst$$Register, $src$$XMMRegister);
10849 __ cmpl($dst$$Register, 0x80000000);
10850 __ jccb(Assembler::notEqual, fast);
10851 __ subptr(rsp, 8);
10852 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10853 __ fld_d(Address(rsp, 0));
10854 __ addptr(rsp, 8);
10855 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2i_wrapper())));
10856 __ bind(fast);
10857 %}
10858 ins_pipe( pipe_slow );
10859 %}
10861 instruct convDPR2L_reg_reg( eADXRegL dst, regDPR src, eFlagsReg cr ) %{
10862 predicate(UseSSE<=1);
10863 match(Set dst (ConvD2L src));
10864 effect( KILL cr );
10865 format %{ "FLD $src\t# Convert double to long\n\t"
10866 "FLDCW trunc mode\n\t"
10867 "SUB ESP,8\n\t"
10868 "FISTp [ESP + #0]\n\t"
10869 "FLDCW std/24-bit mode\n\t"
10870 "POP EAX\n\t"
10871 "POP EDX\n\t"
10872 "CMP EDX,0x80000000\n\t"
10873 "JNE,s fast\n\t"
10874 "TEST EAX,EAX\n\t"
10875 "JNE,s fast\n\t"
10876 "FLD $src\n\t"
10877 "CALL d2l_wrapper\n"
10878 "fast:" %}
10879 ins_encode( Push_Reg_DPR(src), DPR2L_encoding(src) );
10880 ins_pipe( pipe_slow );
10881 %}
10883 // XMM lacks a float/double->long conversion, so use the old FPU stack.
10884 instruct convD2L_reg_reg( eADXRegL dst, regD src, eFlagsReg cr ) %{
10885 predicate (UseSSE>=2);
10886 match(Set dst (ConvD2L src));
10887 effect( KILL cr );
10888 format %{ "SUB ESP,8\t# Convert double to long\n\t"
10889 "MOVSD [ESP],$src\n\t"
10890 "FLD_D [ESP]\n\t"
10891 "FLDCW trunc mode\n\t"
10892 "FISTp [ESP + #0]\n\t"
10893 "FLDCW std/24-bit mode\n\t"
10894 "POP EAX\n\t"
10895 "POP EDX\n\t"
10896 "CMP EDX,0x80000000\n\t"
10897 "JNE,s fast\n\t"
10898 "TEST EAX,EAX\n\t"
10899 "JNE,s fast\n\t"
10900 "SUB ESP,8\n\t"
10901 "MOVSD [ESP],$src\n\t"
10902 "FLD_D [ESP]\n\t"
10903 "ADD ESP,8\n\t"
10904 "CALL d2l_wrapper\n"
10905 "fast:" %}
10906 ins_encode %{
10907 Label fast;
10908 __ subptr(rsp, 8);
10909 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10910 __ fld_d(Address(rsp, 0));
10911 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_trunc()));
10912 __ fistp_d(Address(rsp, 0));
10913 // Restore the rounding mode, mask the exception
10914 if (Compile::current()->in_24_bit_fp_mode()) {
10915 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
10916 } else {
10917 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
10918 }
10919 // Load the converted long, adjust CPU stack
10920 __ pop(rax);
10921 __ pop(rdx);
10922 __ cmpl(rdx, 0x80000000);
10923 __ jccb(Assembler::notEqual, fast);
10924 __ testl(rax, rax);
10925 __ jccb(Assembler::notEqual, fast);
10926 __ subptr(rsp, 8);
10927 __ movdbl(Address(rsp, 0), $src$$XMMRegister);
10928 __ fld_d(Address(rsp, 0));
10929 __ addptr(rsp, 8);
10930 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2l_wrapper())));
10931 __ bind(fast);
10932 %}
10933 ins_pipe( pipe_slow );
10934 %}
10936 // Convert a double to an int. Java semantics require we do complex
10937 // manglations in the corner cases. So we set the rounding mode to
10938 // 'zero', store the darned double down as an int, and reset the
10939 // rounding mode to 'nearest'. The hardware stores a flag value down
10940 // if we would overflow or converted a NAN; we check for this and
10941 // and go the slow path if needed.
10942 instruct convFPR2I_reg_reg(eAXRegI dst, eDXRegI tmp, regFPR src, eFlagsReg cr ) %{
10943 predicate(UseSSE==0);
10944 match(Set dst (ConvF2I src));
10945 effect( KILL tmp, KILL cr );
10946 format %{ "FLD $src\t# Convert float to int \n\t"
10947 "FLDCW trunc mode\n\t"
10948 "SUB ESP,4\n\t"
10949 "FISTp [ESP + #0]\n\t"
10950 "FLDCW std/24-bit mode\n\t"
10951 "POP EAX\n\t"
10952 "CMP EAX,0x80000000\n\t"
10953 "JNE,s fast\n\t"
10954 "FLD $src\n\t"
10955 "CALL d2i_wrapper\n"
10956 "fast:" %}
10957 // DPR2I_encoding works for FPR2I
10958 ins_encode( Push_Reg_FPR(src), DPR2I_encoding(src) );
10959 ins_pipe( pipe_slow );
10960 %}
10962 // Convert a float in xmm to an int reg.
10963 instruct convF2I_reg(eAXRegI dst, eDXRegI tmp, regF src, eFlagsReg cr ) %{
10964 predicate(UseSSE>=1);
10965 match(Set dst (ConvF2I src));
10966 effect( KILL tmp, KILL cr );
10967 format %{ "CVTTSS2SI $dst, $src\n\t"
10968 "CMP $dst,0x80000000\n\t"
10969 "JNE,s fast\n\t"
10970 "SUB ESP, 4\n\t"
10971 "MOVSS [ESP], $src\n\t"
10972 "FLD [ESP]\n\t"
10973 "ADD ESP, 4\n\t"
10974 "CALL d2i_wrapper\n"
10975 "fast:" %}
10976 ins_encode %{
10977 Label fast;
10978 __ cvttss2sil($dst$$Register, $src$$XMMRegister);
10979 __ cmpl($dst$$Register, 0x80000000);
10980 __ jccb(Assembler::notEqual, fast);
10981 __ subptr(rsp, 4);
10982 __ movflt(Address(rsp, 0), $src$$XMMRegister);
10983 __ fld_s(Address(rsp, 0));
10984 __ addptr(rsp, 4);
10985 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2i_wrapper())));
10986 __ bind(fast);
10987 %}
10988 ins_pipe( pipe_slow );
10989 %}
10991 instruct convFPR2L_reg_reg( eADXRegL dst, regFPR src, eFlagsReg cr ) %{
10992 predicate(UseSSE==0);
10993 match(Set dst (ConvF2L src));
10994 effect( KILL cr );
10995 format %{ "FLD $src\t# Convert float to long\n\t"
10996 "FLDCW trunc mode\n\t"
10997 "SUB ESP,8\n\t"
10998 "FISTp [ESP + #0]\n\t"
10999 "FLDCW std/24-bit mode\n\t"
11000 "POP EAX\n\t"
11001 "POP EDX\n\t"
11002 "CMP EDX,0x80000000\n\t"
11003 "JNE,s fast\n\t"
11004 "TEST EAX,EAX\n\t"
11005 "JNE,s fast\n\t"
11006 "FLD $src\n\t"
11007 "CALL d2l_wrapper\n"
11008 "fast:" %}
11009 // DPR2L_encoding works for FPR2L
11010 ins_encode( Push_Reg_FPR(src), DPR2L_encoding(src) );
11011 ins_pipe( pipe_slow );
11012 %}
11014 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11015 instruct convF2L_reg_reg( eADXRegL dst, regF src, eFlagsReg cr ) %{
11016 predicate (UseSSE>=1);
11017 match(Set dst (ConvF2L src));
11018 effect( KILL cr );
11019 format %{ "SUB ESP,8\t# Convert float to long\n\t"
11020 "MOVSS [ESP],$src\n\t"
11021 "FLD_S [ESP]\n\t"
11022 "FLDCW trunc mode\n\t"
11023 "FISTp [ESP + #0]\n\t"
11024 "FLDCW std/24-bit mode\n\t"
11025 "POP EAX\n\t"
11026 "POP EDX\n\t"
11027 "CMP EDX,0x80000000\n\t"
11028 "JNE,s fast\n\t"
11029 "TEST EAX,EAX\n\t"
11030 "JNE,s fast\n\t"
11031 "SUB ESP,4\t# Convert float to long\n\t"
11032 "MOVSS [ESP],$src\n\t"
11033 "FLD_S [ESP]\n\t"
11034 "ADD ESP,4\n\t"
11035 "CALL d2l_wrapper\n"
11036 "fast:" %}
11037 ins_encode %{
11038 Label fast;
11039 __ subptr(rsp, 8);
11040 __ movflt(Address(rsp, 0), $src$$XMMRegister);
11041 __ fld_s(Address(rsp, 0));
11042 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_trunc()));
11043 __ fistp_d(Address(rsp, 0));
11044 // Restore the rounding mode, mask the exception
11045 if (Compile::current()->in_24_bit_fp_mode()) {
11046 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
11047 } else {
11048 __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
11049 }
11050 // Load the converted long, adjust CPU stack
11051 __ pop(rax);
11052 __ pop(rdx);
11053 __ cmpl(rdx, 0x80000000);
11054 __ jccb(Assembler::notEqual, fast);
11055 __ testl(rax, rax);
11056 __ jccb(Assembler::notEqual, fast);
11057 __ subptr(rsp, 4);
11058 __ movflt(Address(rsp, 0), $src$$XMMRegister);
11059 __ fld_s(Address(rsp, 0));
11060 __ addptr(rsp, 4);
11061 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::d2l_wrapper())));
11062 __ bind(fast);
11063 %}
11064 ins_pipe( pipe_slow );
11065 %}
11067 instruct convI2DPR_reg(regDPR dst, stackSlotI src) %{
11068 predicate( UseSSE<=1 );
11069 match(Set dst (ConvI2D src));
11070 format %{ "FILD $src\n\t"
11071 "FSTP $dst" %}
11072 opcode(0xDB, 0x0); /* DB /0 */
11073 ins_encode(Push_Mem_I(src), Pop_Reg_DPR(dst));
11074 ins_pipe( fpu_reg_mem );
11075 %}
11077 instruct convI2D_reg(regD dst, rRegI src) %{
11078 predicate( UseSSE>=2 && !UseXmmI2D );
11079 match(Set dst (ConvI2D src));
11080 format %{ "CVTSI2SD $dst,$src" %}
11081 ins_encode %{
11082 __ cvtsi2sdl ($dst$$XMMRegister, $src$$Register);
11083 %}
11084 ins_pipe( pipe_slow );
11085 %}
11087 instruct convI2D_mem(regD dst, memory mem) %{
11088 predicate( UseSSE>=2 );
11089 match(Set dst (ConvI2D (LoadI mem)));
11090 format %{ "CVTSI2SD $dst,$mem" %}
11091 ins_encode %{
11092 __ cvtsi2sdl ($dst$$XMMRegister, $mem$$Address);
11093 %}
11094 ins_pipe( pipe_slow );
11095 %}
11097 instruct convXI2D_reg(regD dst, rRegI src)
11098 %{
11099 predicate( UseSSE>=2 && UseXmmI2D );
11100 match(Set dst (ConvI2D src));
11102 format %{ "MOVD $dst,$src\n\t"
11103 "CVTDQ2PD $dst,$dst\t# i2d" %}
11104 ins_encode %{
11105 __ movdl($dst$$XMMRegister, $src$$Register);
11106 __ cvtdq2pd($dst$$XMMRegister, $dst$$XMMRegister);
11107 %}
11108 ins_pipe(pipe_slow); // XXX
11109 %}
11111 instruct convI2DPR_mem(regDPR dst, memory mem) %{
11112 predicate( UseSSE<=1 && !Compile::current()->select_24_bit_instr());
11113 match(Set dst (ConvI2D (LoadI mem)));
11114 format %{ "FILD $mem\n\t"
11115 "FSTP $dst" %}
11116 opcode(0xDB); /* DB /0 */
11117 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11118 Pop_Reg_DPR(dst));
11119 ins_pipe( fpu_reg_mem );
11120 %}
11122 // Convert a byte to a float; no rounding step needed.
11123 instruct conv24I2FPR_reg(regFPR dst, stackSlotI src) %{
11124 predicate( UseSSE==0 && n->in(1)->Opcode() == Op_AndI && n->in(1)->in(2)->is_Con() && n->in(1)->in(2)->get_int() == 255 );
11125 match(Set dst (ConvI2F src));
11126 format %{ "FILD $src\n\t"
11127 "FSTP $dst" %}
11129 opcode(0xDB, 0x0); /* DB /0 */
11130 ins_encode(Push_Mem_I(src), Pop_Reg_FPR(dst));
11131 ins_pipe( fpu_reg_mem );
11132 %}
11134 // In 24-bit mode, force exponent rounding by storing back out
11135 instruct convI2FPR_SSF(stackSlotF dst, stackSlotI src) %{
11136 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11137 match(Set dst (ConvI2F src));
11138 ins_cost(200);
11139 format %{ "FILD $src\n\t"
11140 "FSTP_S $dst" %}
11141 opcode(0xDB, 0x0); /* DB /0 */
11142 ins_encode( Push_Mem_I(src),
11143 Pop_Mem_FPR(dst));
11144 ins_pipe( fpu_mem_mem );
11145 %}
11147 // In 24-bit mode, force exponent rounding by storing back out
11148 instruct convI2FPR_SSF_mem(stackSlotF dst, memory mem) %{
11149 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11150 match(Set dst (ConvI2F (LoadI mem)));
11151 ins_cost(200);
11152 format %{ "FILD $mem\n\t"
11153 "FSTP_S $dst" %}
11154 opcode(0xDB); /* DB /0 */
11155 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11156 Pop_Mem_FPR(dst));
11157 ins_pipe( fpu_mem_mem );
11158 %}
11160 // This instruction does not round to 24-bits
11161 instruct convI2FPR_reg(regFPR dst, stackSlotI src) %{
11162 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11163 match(Set dst (ConvI2F src));
11164 format %{ "FILD $src\n\t"
11165 "FSTP $dst" %}
11166 opcode(0xDB, 0x0); /* DB /0 */
11167 ins_encode( Push_Mem_I(src),
11168 Pop_Reg_FPR(dst));
11169 ins_pipe( fpu_reg_mem );
11170 %}
11172 // This instruction does not round to 24-bits
11173 instruct convI2FPR_mem(regFPR dst, memory mem) %{
11174 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11175 match(Set dst (ConvI2F (LoadI mem)));
11176 format %{ "FILD $mem\n\t"
11177 "FSTP $dst" %}
11178 opcode(0xDB); /* DB /0 */
11179 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11180 Pop_Reg_FPR(dst));
11181 ins_pipe( fpu_reg_mem );
11182 %}
11184 // Convert an int to a float in xmm; no rounding step needed.
11185 instruct convI2F_reg(regF dst, rRegI src) %{
11186 predicate( UseSSE==1 || UseSSE>=2 && !UseXmmI2F );
11187 match(Set dst (ConvI2F src));
11188 format %{ "CVTSI2SS $dst, $src" %}
11189 ins_encode %{
11190 __ cvtsi2ssl ($dst$$XMMRegister, $src$$Register);
11191 %}
11192 ins_pipe( pipe_slow );
11193 %}
11195 instruct convXI2F_reg(regF dst, rRegI src)
11196 %{
11197 predicate( UseSSE>=2 && UseXmmI2F );
11198 match(Set dst (ConvI2F src));
11200 format %{ "MOVD $dst,$src\n\t"
11201 "CVTDQ2PS $dst,$dst\t# i2f" %}
11202 ins_encode %{
11203 __ movdl($dst$$XMMRegister, $src$$Register);
11204 __ cvtdq2ps($dst$$XMMRegister, $dst$$XMMRegister);
11205 %}
11206 ins_pipe(pipe_slow); // XXX
11207 %}
11209 instruct convI2L_reg( eRegL dst, rRegI src, eFlagsReg cr) %{
11210 match(Set dst (ConvI2L src));
11211 effect(KILL cr);
11212 ins_cost(375);
11213 format %{ "MOV $dst.lo,$src\n\t"
11214 "MOV $dst.hi,$src\n\t"
11215 "SAR $dst.hi,31" %}
11216 ins_encode(convert_int_long(dst,src));
11217 ins_pipe( ialu_reg_reg_long );
11218 %}
11220 // Zero-extend convert int to long
11221 instruct convI2L_reg_zex(eRegL dst, rRegI src, immL_32bits mask, eFlagsReg flags ) %{
11222 match(Set dst (AndL (ConvI2L src) mask) );
11223 effect( KILL flags );
11224 ins_cost(250);
11225 format %{ "MOV $dst.lo,$src\n\t"
11226 "XOR $dst.hi,$dst.hi" %}
11227 opcode(0x33); // XOR
11228 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11229 ins_pipe( ialu_reg_reg_long );
11230 %}
11232 // Zero-extend long
11233 instruct zerox_long(eRegL dst, eRegL src, immL_32bits mask, eFlagsReg flags ) %{
11234 match(Set dst (AndL src mask) );
11235 effect( KILL flags );
11236 ins_cost(250);
11237 format %{ "MOV $dst.lo,$src.lo\n\t"
11238 "XOR $dst.hi,$dst.hi\n\t" %}
11239 opcode(0x33); // XOR
11240 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11241 ins_pipe( ialu_reg_reg_long );
11242 %}
11244 instruct convL2DPR_reg( stackSlotD dst, eRegL src, eFlagsReg cr) %{
11245 predicate (UseSSE<=1);
11246 match(Set dst (ConvL2D src));
11247 effect( KILL cr );
11248 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
11249 "PUSH $src.lo\n\t"
11250 "FILD ST,[ESP + #0]\n\t"
11251 "ADD ESP,8\n\t"
11252 "FSTP_D $dst\t# D-round" %}
11253 opcode(0xDF, 0x5); /* DF /5 */
11254 ins_encode(convert_long_double(src), Pop_Mem_DPR(dst));
11255 ins_pipe( pipe_slow );
11256 %}
11258 instruct convL2D_reg( regD dst, eRegL src, eFlagsReg cr) %{
11259 predicate (UseSSE>=2);
11260 match(Set dst (ConvL2D src));
11261 effect( KILL cr );
11262 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
11263 "PUSH $src.lo\n\t"
11264 "FILD_D [ESP]\n\t"
11265 "FSTP_D [ESP]\n\t"
11266 "MOVSD $dst,[ESP]\n\t"
11267 "ADD ESP,8" %}
11268 opcode(0xDF, 0x5); /* DF /5 */
11269 ins_encode(convert_long_double2(src), Push_ResultD(dst));
11270 ins_pipe( pipe_slow );
11271 %}
11273 instruct convL2F_reg( regF dst, eRegL src, eFlagsReg cr) %{
11274 predicate (UseSSE>=1);
11275 match(Set dst (ConvL2F src));
11276 effect( KILL cr );
11277 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
11278 "PUSH $src.lo\n\t"
11279 "FILD_D [ESP]\n\t"
11280 "FSTP_S [ESP]\n\t"
11281 "MOVSS $dst,[ESP]\n\t"
11282 "ADD ESP,8" %}
11283 opcode(0xDF, 0x5); /* DF /5 */
11284 ins_encode(convert_long_double2(src), Push_ResultF(dst,0x8));
11285 ins_pipe( pipe_slow );
11286 %}
11288 instruct convL2FPR_reg( stackSlotF dst, eRegL src, eFlagsReg cr) %{
11289 match(Set dst (ConvL2F src));
11290 effect( KILL cr );
11291 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
11292 "PUSH $src.lo\n\t"
11293 "FILD ST,[ESP + #0]\n\t"
11294 "ADD ESP,8\n\t"
11295 "FSTP_S $dst\t# F-round" %}
11296 opcode(0xDF, 0x5); /* DF /5 */
11297 ins_encode(convert_long_double(src), Pop_Mem_FPR(dst));
11298 ins_pipe( pipe_slow );
11299 %}
11301 instruct convL2I_reg( rRegI dst, eRegL src ) %{
11302 match(Set dst (ConvL2I src));
11303 effect( DEF dst, USE src );
11304 format %{ "MOV $dst,$src.lo" %}
11305 ins_encode(enc_CopyL_Lo(dst,src));
11306 ins_pipe( ialu_reg_reg );
11307 %}
11310 instruct MoveF2I_stack_reg(rRegI dst, stackSlotF src) %{
11311 match(Set dst (MoveF2I src));
11312 effect( DEF dst, USE src );
11313 ins_cost(100);
11314 format %{ "MOV $dst,$src\t# MoveF2I_stack_reg" %}
11315 ins_encode %{
11316 __ movl($dst$$Register, Address(rsp, $src$$disp));
11317 %}
11318 ins_pipe( ialu_reg_mem );
11319 %}
11321 instruct MoveFPR2I_reg_stack(stackSlotI dst, regFPR src) %{
11322 predicate(UseSSE==0);
11323 match(Set dst (MoveF2I src));
11324 effect( DEF dst, USE src );
11326 ins_cost(125);
11327 format %{ "FST_S $dst,$src\t# MoveF2I_reg_stack" %}
11328 ins_encode( Pop_Mem_Reg_FPR(dst, src) );
11329 ins_pipe( fpu_mem_reg );
11330 %}
11332 instruct MoveF2I_reg_stack_sse(stackSlotI dst, regF src) %{
11333 predicate(UseSSE>=1);
11334 match(Set dst (MoveF2I src));
11335 effect( DEF dst, USE src );
11337 ins_cost(95);
11338 format %{ "MOVSS $dst,$src\t# MoveF2I_reg_stack_sse" %}
11339 ins_encode %{
11340 __ movflt(Address(rsp, $dst$$disp), $src$$XMMRegister);
11341 %}
11342 ins_pipe( pipe_slow );
11343 %}
11345 instruct MoveF2I_reg_reg_sse(rRegI dst, regF src) %{
11346 predicate(UseSSE>=2);
11347 match(Set dst (MoveF2I src));
11348 effect( DEF dst, USE src );
11349 ins_cost(85);
11350 format %{ "MOVD $dst,$src\t# MoveF2I_reg_reg_sse" %}
11351 ins_encode %{
11352 __ movdl($dst$$Register, $src$$XMMRegister);
11353 %}
11354 ins_pipe( pipe_slow );
11355 %}
11357 instruct MoveI2F_reg_stack(stackSlotF dst, rRegI src) %{
11358 match(Set dst (MoveI2F src));
11359 effect( DEF dst, USE src );
11361 ins_cost(100);
11362 format %{ "MOV $dst,$src\t# MoveI2F_reg_stack" %}
11363 ins_encode %{
11364 __ movl(Address(rsp, $dst$$disp), $src$$Register);
11365 %}
11366 ins_pipe( ialu_mem_reg );
11367 %}
11370 instruct MoveI2FPR_stack_reg(regFPR dst, stackSlotI src) %{
11371 predicate(UseSSE==0);
11372 match(Set dst (MoveI2F src));
11373 effect(DEF dst, USE src);
11375 ins_cost(125);
11376 format %{ "FLD_S $src\n\t"
11377 "FSTP $dst\t# MoveI2F_stack_reg" %}
11378 opcode(0xD9); /* D9 /0, FLD m32real */
11379 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
11380 Pop_Reg_FPR(dst) );
11381 ins_pipe( fpu_reg_mem );
11382 %}
11384 instruct MoveI2F_stack_reg_sse(regF dst, stackSlotI src) %{
11385 predicate(UseSSE>=1);
11386 match(Set dst (MoveI2F src));
11387 effect( DEF dst, USE src );
11389 ins_cost(95);
11390 format %{ "MOVSS $dst,$src\t# MoveI2F_stack_reg_sse" %}
11391 ins_encode %{
11392 __ movflt($dst$$XMMRegister, Address(rsp, $src$$disp));
11393 %}
11394 ins_pipe( pipe_slow );
11395 %}
11397 instruct MoveI2F_reg_reg_sse(regF dst, rRegI src) %{
11398 predicate(UseSSE>=2);
11399 match(Set dst (MoveI2F src));
11400 effect( DEF dst, USE src );
11402 ins_cost(85);
11403 format %{ "MOVD $dst,$src\t# MoveI2F_reg_reg_sse" %}
11404 ins_encode %{
11405 __ movdl($dst$$XMMRegister, $src$$Register);
11406 %}
11407 ins_pipe( pipe_slow );
11408 %}
11410 instruct MoveD2L_stack_reg(eRegL dst, stackSlotD src) %{
11411 match(Set dst (MoveD2L src));
11412 effect(DEF dst, USE src);
11414 ins_cost(250);
11415 format %{ "MOV $dst.lo,$src\n\t"
11416 "MOV $dst.hi,$src+4\t# MoveD2L_stack_reg" %}
11417 opcode(0x8B, 0x8B);
11418 ins_encode( OpcP, RegMem(dst,src), OpcS, RegMem_Hi(dst,src));
11419 ins_pipe( ialu_mem_long_reg );
11420 %}
11422 instruct MoveDPR2L_reg_stack(stackSlotL dst, regDPR src) %{
11423 predicate(UseSSE<=1);
11424 match(Set dst (MoveD2L src));
11425 effect(DEF dst, USE src);
11427 ins_cost(125);
11428 format %{ "FST_D $dst,$src\t# MoveD2L_reg_stack" %}
11429 ins_encode( Pop_Mem_Reg_DPR(dst, src) );
11430 ins_pipe( fpu_mem_reg );
11431 %}
11433 instruct MoveD2L_reg_stack_sse(stackSlotL dst, regD src) %{
11434 predicate(UseSSE>=2);
11435 match(Set dst (MoveD2L src));
11436 effect(DEF dst, USE src);
11437 ins_cost(95);
11438 format %{ "MOVSD $dst,$src\t# MoveD2L_reg_stack_sse" %}
11439 ins_encode %{
11440 __ movdbl(Address(rsp, $dst$$disp), $src$$XMMRegister);
11441 %}
11442 ins_pipe( pipe_slow );
11443 %}
11445 instruct MoveD2L_reg_reg_sse(eRegL dst, regD src, regD tmp) %{
11446 predicate(UseSSE>=2);
11447 match(Set dst (MoveD2L src));
11448 effect(DEF dst, USE src, TEMP tmp);
11449 ins_cost(85);
11450 format %{ "MOVD $dst.lo,$src\n\t"
11451 "PSHUFLW $tmp,$src,0x4E\n\t"
11452 "MOVD $dst.hi,$tmp\t# MoveD2L_reg_reg_sse" %}
11453 ins_encode %{
11454 __ movdl($dst$$Register, $src$$XMMRegister);
11455 __ pshuflw($tmp$$XMMRegister, $src$$XMMRegister, 0x4e);
11456 __ movdl(HIGH_FROM_LOW($dst$$Register), $tmp$$XMMRegister);
11457 %}
11458 ins_pipe( pipe_slow );
11459 %}
11461 instruct MoveL2D_reg_stack(stackSlotD dst, eRegL src) %{
11462 match(Set dst (MoveL2D src));
11463 effect(DEF dst, USE src);
11465 ins_cost(200);
11466 format %{ "MOV $dst,$src.lo\n\t"
11467 "MOV $dst+4,$src.hi\t# MoveL2D_reg_stack" %}
11468 opcode(0x89, 0x89);
11469 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
11470 ins_pipe( ialu_mem_long_reg );
11471 %}
11474 instruct MoveL2DPR_stack_reg(regDPR dst, stackSlotL src) %{
11475 predicate(UseSSE<=1);
11476 match(Set dst (MoveL2D src));
11477 effect(DEF dst, USE src);
11478 ins_cost(125);
11480 format %{ "FLD_D $src\n\t"
11481 "FSTP $dst\t# MoveL2D_stack_reg" %}
11482 opcode(0xDD); /* DD /0, FLD m64real */
11483 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
11484 Pop_Reg_DPR(dst) );
11485 ins_pipe( fpu_reg_mem );
11486 %}
11489 instruct MoveL2D_stack_reg_sse(regD dst, stackSlotL src) %{
11490 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
11491 match(Set dst (MoveL2D src));
11492 effect(DEF dst, USE src);
11494 ins_cost(95);
11495 format %{ "MOVSD $dst,$src\t# MoveL2D_stack_reg_sse" %}
11496 ins_encode %{
11497 __ movdbl($dst$$XMMRegister, Address(rsp, $src$$disp));
11498 %}
11499 ins_pipe( pipe_slow );
11500 %}
11502 instruct MoveL2D_stack_reg_sse_partial(regD dst, stackSlotL src) %{
11503 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
11504 match(Set dst (MoveL2D src));
11505 effect(DEF dst, USE src);
11507 ins_cost(95);
11508 format %{ "MOVLPD $dst,$src\t# MoveL2D_stack_reg_sse" %}
11509 ins_encode %{
11510 __ movdbl($dst$$XMMRegister, Address(rsp, $src$$disp));
11511 %}
11512 ins_pipe( pipe_slow );
11513 %}
11515 instruct MoveL2D_reg_reg_sse(regD dst, eRegL src, regD tmp) %{
11516 predicate(UseSSE>=2);
11517 match(Set dst (MoveL2D src));
11518 effect(TEMP dst, USE src, TEMP tmp);
11519 ins_cost(85);
11520 format %{ "MOVD $dst,$src.lo\n\t"
11521 "MOVD $tmp,$src.hi\n\t"
11522 "PUNPCKLDQ $dst,$tmp\t# MoveL2D_reg_reg_sse" %}
11523 ins_encode %{
11524 __ movdl($dst$$XMMRegister, $src$$Register);
11525 __ movdl($tmp$$XMMRegister, HIGH_FROM_LOW($src$$Register));
11526 __ punpckldq($dst$$XMMRegister, $tmp$$XMMRegister);
11527 %}
11528 ins_pipe( pipe_slow );
11529 %}
11532 // =======================================================================
11533 // fast clearing of an array
11534 instruct rep_stos(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
11535 predicate(!UseFastStosb);
11536 match(Set dummy (ClearArray cnt base));
11537 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
11538 format %{ "XOR EAX,EAX\t# ClearArray:\n\t"
11539 "SHL ECX,1\t# Convert doublewords to words\n\t"
11540 "REP STOS\t# store EAX into [EDI++] while ECX--" %}
11541 ins_encode %{
11542 __ clear_mem($base$$Register, $cnt$$Register, $zero$$Register);
11543 %}
11544 ins_pipe( pipe_slow );
11545 %}
11547 instruct rep_fast_stosb(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
11548 predicate(UseFastStosb);
11549 match(Set dummy (ClearArray cnt base));
11550 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
11551 format %{ "XOR EAX,EAX\t# ClearArray:\n\t"
11552 "SHL ECX,3\t# Convert doublewords to bytes\n\t"
11553 "REP STOSB\t# store EAX into [EDI++] while ECX--" %}
11554 ins_encode %{
11555 __ clear_mem($base$$Register, $cnt$$Register, $zero$$Register);
11556 %}
11557 ins_pipe( pipe_slow );
11558 %}
11560 instruct string_compare(eDIRegP str1, eCXRegI cnt1, eSIRegP str2, eDXRegI cnt2,
11561 eAXRegI result, regD tmp1, eFlagsReg cr) %{
11562 match(Set result (StrComp (Binary str1 cnt1) (Binary str2 cnt2)));
11563 effect(TEMP tmp1, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL cr);
11565 format %{ "String Compare $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp1" %}
11566 ins_encode %{
11567 __ string_compare($str1$$Register, $str2$$Register,
11568 $cnt1$$Register, $cnt2$$Register, $result$$Register,
11569 $tmp1$$XMMRegister);
11570 %}
11571 ins_pipe( pipe_slow );
11572 %}
11574 // fast string equals
11575 instruct string_equals(eDIRegP str1, eSIRegP str2, eCXRegI cnt, eAXRegI result,
11576 regD tmp1, regD tmp2, eBXRegI tmp3, eFlagsReg cr) %{
11577 match(Set result (StrEquals (Binary str1 str2) cnt));
11578 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt, KILL tmp3, KILL cr);
11580 format %{ "String Equals $str1,$str2,$cnt -> $result // KILL $tmp1, $tmp2, $tmp3" %}
11581 ins_encode %{
11582 __ char_arrays_equals(false, $str1$$Register, $str2$$Register,
11583 $cnt$$Register, $result$$Register, $tmp3$$Register,
11584 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
11585 %}
11586 ins_pipe( pipe_slow );
11587 %}
11589 // fast search of substring with known size.
11590 instruct string_indexof_con(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, immI int_cnt2,
11591 eBXRegI result, regD vec, eAXRegI cnt2, eCXRegI tmp, eFlagsReg cr) %{
11592 predicate(UseSSE42Intrinsics);
11593 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 int_cnt2)));
11594 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, KILL cnt2, KILL tmp, KILL cr);
11596 format %{ "String IndexOf $str1,$cnt1,$str2,$int_cnt2 -> $result // KILL $vec, $cnt1, $cnt2, $tmp" %}
11597 ins_encode %{
11598 int icnt2 = (int)$int_cnt2$$constant;
11599 if (icnt2 >= 8) {
11600 // IndexOf for constant substrings with size >= 8 elements
11601 // which don't need to be loaded through stack.
11602 __ string_indexofC8($str1$$Register, $str2$$Register,
11603 $cnt1$$Register, $cnt2$$Register,
11604 icnt2, $result$$Register,
11605 $vec$$XMMRegister, $tmp$$Register);
11606 } else {
11607 // Small strings are loaded through stack if they cross page boundary.
11608 __ string_indexof($str1$$Register, $str2$$Register,
11609 $cnt1$$Register, $cnt2$$Register,
11610 icnt2, $result$$Register,
11611 $vec$$XMMRegister, $tmp$$Register);
11612 }
11613 %}
11614 ins_pipe( pipe_slow );
11615 %}
11617 instruct string_indexof(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, eAXRegI cnt2,
11618 eBXRegI result, regD vec, eCXRegI tmp, eFlagsReg cr) %{
11619 predicate(UseSSE42Intrinsics);
11620 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 cnt2)));
11621 effect(TEMP vec, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL tmp, KILL cr);
11623 format %{ "String IndexOf $str1,$cnt1,$str2,$cnt2 -> $result // KILL all" %}
11624 ins_encode %{
11625 __ string_indexof($str1$$Register, $str2$$Register,
11626 $cnt1$$Register, $cnt2$$Register,
11627 (-1), $result$$Register,
11628 $vec$$XMMRegister, $tmp$$Register);
11629 %}
11630 ins_pipe( pipe_slow );
11631 %}
11633 // fast array equals
11634 instruct array_equals(eDIRegP ary1, eSIRegP ary2, eAXRegI result,
11635 regD tmp1, regD tmp2, eCXRegI tmp3, eBXRegI tmp4, eFlagsReg cr)
11636 %{
11637 match(Set result (AryEq ary1 ary2));
11638 effect(TEMP tmp1, TEMP tmp2, USE_KILL ary1, USE_KILL ary2, KILL tmp3, KILL tmp4, KILL cr);
11639 //ins_cost(300);
11641 format %{ "Array Equals $ary1,$ary2 -> $result // KILL $tmp1, $tmp2, $tmp3, $tmp4" %}
11642 ins_encode %{
11643 __ char_arrays_equals(true, $ary1$$Register, $ary2$$Register,
11644 $tmp3$$Register, $result$$Register, $tmp4$$Register,
11645 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
11646 %}
11647 ins_pipe( pipe_slow );
11648 %}
11650 // encode char[] to byte[] in ISO_8859_1
11651 instruct encode_iso_array(eSIRegP src, eDIRegP dst, eDXRegI len,
11652 regD tmp1, regD tmp2, regD tmp3, regD tmp4,
11653 eCXRegI tmp5, eAXRegI result, eFlagsReg cr) %{
11654 match(Set result (EncodeISOArray src (Binary dst len)));
11655 effect(TEMP tmp1, TEMP tmp2, TEMP tmp3, TEMP tmp4, USE_KILL src, USE_KILL dst, USE_KILL len, KILL tmp5, KILL cr);
11657 format %{ "Encode array $src,$dst,$len -> $result // KILL ECX, EDX, $tmp1, $tmp2, $tmp3, $tmp4, ESI, EDI " %}
11658 ins_encode %{
11659 __ encode_iso_array($src$$Register, $dst$$Register, $len$$Register,
11660 $tmp1$$XMMRegister, $tmp2$$XMMRegister, $tmp3$$XMMRegister,
11661 $tmp4$$XMMRegister, $tmp5$$Register, $result$$Register);
11662 %}
11663 ins_pipe( pipe_slow );
11664 %}
11667 //----------Control Flow Instructions------------------------------------------
11668 // Signed compare Instructions
11669 instruct compI_eReg(eFlagsReg cr, rRegI op1, rRegI op2) %{
11670 match(Set cr (CmpI op1 op2));
11671 effect( DEF cr, USE op1, USE op2 );
11672 format %{ "CMP $op1,$op2" %}
11673 opcode(0x3B); /* Opcode 3B /r */
11674 ins_encode( OpcP, RegReg( op1, op2) );
11675 ins_pipe( ialu_cr_reg_reg );
11676 %}
11678 instruct compI_eReg_imm(eFlagsReg cr, rRegI op1, immI op2) %{
11679 match(Set cr (CmpI op1 op2));
11680 effect( DEF cr, USE op1 );
11681 format %{ "CMP $op1,$op2" %}
11682 opcode(0x81,0x07); /* Opcode 81 /7 */
11683 // ins_encode( RegImm( op1, op2) ); /* Was CmpImm */
11684 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11685 ins_pipe( ialu_cr_reg_imm );
11686 %}
11688 // Cisc-spilled version of cmpI_eReg
11689 instruct compI_eReg_mem(eFlagsReg cr, rRegI op1, memory op2) %{
11690 match(Set cr (CmpI op1 (LoadI op2)));
11692 format %{ "CMP $op1,$op2" %}
11693 ins_cost(500);
11694 opcode(0x3B); /* Opcode 3B /r */
11695 ins_encode( OpcP, RegMem( op1, op2) );
11696 ins_pipe( ialu_cr_reg_mem );
11697 %}
11699 instruct testI_reg( eFlagsReg cr, rRegI src, immI0 zero ) %{
11700 match(Set cr (CmpI src zero));
11701 effect( DEF cr, USE src );
11703 format %{ "TEST $src,$src" %}
11704 opcode(0x85);
11705 ins_encode( OpcP, RegReg( src, src ) );
11706 ins_pipe( ialu_cr_reg_imm );
11707 %}
11709 instruct testI_reg_imm( eFlagsReg cr, rRegI src, immI con, immI0 zero ) %{
11710 match(Set cr (CmpI (AndI src con) zero));
11712 format %{ "TEST $src,$con" %}
11713 opcode(0xF7,0x00);
11714 ins_encode( OpcP, RegOpc(src), Con32(con) );
11715 ins_pipe( ialu_cr_reg_imm );
11716 %}
11718 instruct testI_reg_mem( eFlagsReg cr, rRegI src, memory mem, immI0 zero ) %{
11719 match(Set cr (CmpI (AndI src mem) zero));
11721 format %{ "TEST $src,$mem" %}
11722 opcode(0x85);
11723 ins_encode( OpcP, RegMem( src, mem ) );
11724 ins_pipe( ialu_cr_reg_mem );
11725 %}
11727 // Unsigned compare Instructions; really, same as signed except they
11728 // produce an eFlagsRegU instead of eFlagsReg.
11729 instruct compU_eReg(eFlagsRegU cr, rRegI op1, rRegI op2) %{
11730 match(Set cr (CmpU op1 op2));
11732 format %{ "CMPu $op1,$op2" %}
11733 opcode(0x3B); /* Opcode 3B /r */
11734 ins_encode( OpcP, RegReg( op1, op2) );
11735 ins_pipe( ialu_cr_reg_reg );
11736 %}
11738 instruct compU_eReg_imm(eFlagsRegU cr, rRegI op1, immI op2) %{
11739 match(Set cr (CmpU op1 op2));
11741 format %{ "CMPu $op1,$op2" %}
11742 opcode(0x81,0x07); /* Opcode 81 /7 */
11743 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11744 ins_pipe( ialu_cr_reg_imm );
11745 %}
11747 // // Cisc-spilled version of cmpU_eReg
11748 instruct compU_eReg_mem(eFlagsRegU cr, rRegI op1, memory op2) %{
11749 match(Set cr (CmpU op1 (LoadI op2)));
11751 format %{ "CMPu $op1,$op2" %}
11752 ins_cost(500);
11753 opcode(0x3B); /* Opcode 3B /r */
11754 ins_encode( OpcP, RegMem( op1, op2) );
11755 ins_pipe( ialu_cr_reg_mem );
11756 %}
11758 // // Cisc-spilled version of cmpU_eReg
11759 //instruct compU_mem_eReg(eFlagsRegU cr, memory op1, rRegI op2) %{
11760 // match(Set cr (CmpU (LoadI op1) op2));
11761 //
11762 // format %{ "CMPu $op1,$op2" %}
11763 // ins_cost(500);
11764 // opcode(0x39); /* Opcode 39 /r */
11765 // ins_encode( OpcP, RegMem( op1, op2) );
11766 //%}
11768 instruct testU_reg( eFlagsRegU cr, rRegI src, immI0 zero ) %{
11769 match(Set cr (CmpU src zero));
11771 format %{ "TESTu $src,$src" %}
11772 opcode(0x85);
11773 ins_encode( OpcP, RegReg( src, src ) );
11774 ins_pipe( ialu_cr_reg_imm );
11775 %}
11777 // Unsigned pointer compare Instructions
11778 instruct compP_eReg(eFlagsRegU cr, eRegP op1, eRegP op2) %{
11779 match(Set cr (CmpP op1 op2));
11781 format %{ "CMPu $op1,$op2" %}
11782 opcode(0x3B); /* Opcode 3B /r */
11783 ins_encode( OpcP, RegReg( op1, op2) );
11784 ins_pipe( ialu_cr_reg_reg );
11785 %}
11787 instruct compP_eReg_imm(eFlagsRegU cr, eRegP op1, immP op2) %{
11788 match(Set cr (CmpP op1 op2));
11790 format %{ "CMPu $op1,$op2" %}
11791 opcode(0x81,0x07); /* Opcode 81 /7 */
11792 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
11793 ins_pipe( ialu_cr_reg_imm );
11794 %}
11796 // // Cisc-spilled version of cmpP_eReg
11797 instruct compP_eReg_mem(eFlagsRegU cr, eRegP op1, memory op2) %{
11798 match(Set cr (CmpP op1 (LoadP op2)));
11800 format %{ "CMPu $op1,$op2" %}
11801 ins_cost(500);
11802 opcode(0x3B); /* Opcode 3B /r */
11803 ins_encode( OpcP, RegMem( op1, op2) );
11804 ins_pipe( ialu_cr_reg_mem );
11805 %}
11807 // // Cisc-spilled version of cmpP_eReg
11808 //instruct compP_mem_eReg(eFlagsRegU cr, memory op1, eRegP op2) %{
11809 // match(Set cr (CmpP (LoadP op1) op2));
11810 //
11811 // format %{ "CMPu $op1,$op2" %}
11812 // ins_cost(500);
11813 // opcode(0x39); /* Opcode 39 /r */
11814 // ins_encode( OpcP, RegMem( op1, op2) );
11815 //%}
11817 // Compare raw pointer (used in out-of-heap check).
11818 // Only works because non-oop pointers must be raw pointers
11819 // and raw pointers have no anti-dependencies.
11820 instruct compP_mem_eReg( eFlagsRegU cr, eRegP op1, memory op2 ) %{
11821 predicate( n->in(2)->in(2)->bottom_type()->reloc() == relocInfo::none );
11822 match(Set cr (CmpP op1 (LoadP op2)));
11824 format %{ "CMPu $op1,$op2" %}
11825 opcode(0x3B); /* Opcode 3B /r */
11826 ins_encode( OpcP, RegMem( op1, op2) );
11827 ins_pipe( ialu_cr_reg_mem );
11828 %}
11830 //
11831 // This will generate a signed flags result. This should be ok
11832 // since any compare to a zero should be eq/neq.
11833 instruct testP_reg( eFlagsReg cr, eRegP src, immP0 zero ) %{
11834 match(Set cr (CmpP src zero));
11836 format %{ "TEST $src,$src" %}
11837 opcode(0x85);
11838 ins_encode( OpcP, RegReg( src, src ) );
11839 ins_pipe( ialu_cr_reg_imm );
11840 %}
11842 // Cisc-spilled version of testP_reg
11843 // This will generate a signed flags result. This should be ok
11844 // since any compare to a zero should be eq/neq.
11845 instruct testP_Reg_mem( eFlagsReg cr, memory op, immI0 zero ) %{
11846 match(Set cr (CmpP (LoadP op) zero));
11848 format %{ "TEST $op,0xFFFFFFFF" %}
11849 ins_cost(500);
11850 opcode(0xF7); /* Opcode F7 /0 */
11851 ins_encode( OpcP, RMopc_Mem(0x00,op), Con_d32(0xFFFFFFFF) );
11852 ins_pipe( ialu_cr_reg_imm );
11853 %}
11855 // Yanked all unsigned pointer compare operations.
11856 // Pointer compares are done with CmpP which is already unsigned.
11858 //----------Max and Min--------------------------------------------------------
11859 // Min Instructions
11860 ////
11861 // *** Min and Max using the conditional move are slower than the
11862 // *** branch version on a Pentium III.
11863 // // Conditional move for min
11864 //instruct cmovI_reg_lt( rRegI op2, rRegI op1, eFlagsReg cr ) %{
11865 // effect( USE_DEF op2, USE op1, USE cr );
11866 // format %{ "CMOVlt $op2,$op1\t! min" %}
11867 // opcode(0x4C,0x0F);
11868 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
11869 // ins_pipe( pipe_cmov_reg );
11870 //%}
11871 //
11872 //// Min Register with Register (P6 version)
11873 //instruct minI_eReg_p6( rRegI op1, rRegI op2 ) %{
11874 // predicate(VM_Version::supports_cmov() );
11875 // match(Set op2 (MinI op1 op2));
11876 // ins_cost(200);
11877 // expand %{
11878 // eFlagsReg cr;
11879 // compI_eReg(cr,op1,op2);
11880 // cmovI_reg_lt(op2,op1,cr);
11881 // %}
11882 //%}
11884 // Min Register with Register (generic version)
11885 instruct minI_eReg(rRegI dst, rRegI src, eFlagsReg flags) %{
11886 match(Set dst (MinI dst src));
11887 effect(KILL flags);
11888 ins_cost(300);
11890 format %{ "MIN $dst,$src" %}
11891 opcode(0xCC);
11892 ins_encode( min_enc(dst,src) );
11893 ins_pipe( pipe_slow );
11894 %}
11896 // Max Register with Register
11897 // *** Min and Max using the conditional move are slower than the
11898 // *** branch version on a Pentium III.
11899 // // Conditional move for max
11900 //instruct cmovI_reg_gt( rRegI op2, rRegI op1, eFlagsReg cr ) %{
11901 // effect( USE_DEF op2, USE op1, USE cr );
11902 // format %{ "CMOVgt $op2,$op1\t! max" %}
11903 // opcode(0x4F,0x0F);
11904 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
11905 // ins_pipe( pipe_cmov_reg );
11906 //%}
11907 //
11908 // // Max Register with Register (P6 version)
11909 //instruct maxI_eReg_p6( rRegI op1, rRegI op2 ) %{
11910 // predicate(VM_Version::supports_cmov() );
11911 // match(Set op2 (MaxI op1 op2));
11912 // ins_cost(200);
11913 // expand %{
11914 // eFlagsReg cr;
11915 // compI_eReg(cr,op1,op2);
11916 // cmovI_reg_gt(op2,op1,cr);
11917 // %}
11918 //%}
11920 // Max Register with Register (generic version)
11921 instruct maxI_eReg(rRegI dst, rRegI src, eFlagsReg flags) %{
11922 match(Set dst (MaxI dst src));
11923 effect(KILL flags);
11924 ins_cost(300);
11926 format %{ "MAX $dst,$src" %}
11927 opcode(0xCC);
11928 ins_encode( max_enc(dst,src) );
11929 ins_pipe( pipe_slow );
11930 %}
11932 // ============================================================================
11933 // Counted Loop limit node which represents exact final iterator value.
11934 // Note: the resulting value should fit into integer range since
11935 // counted loops have limit check on overflow.
11936 instruct loopLimit_eReg(eAXRegI limit, nadxRegI init, immI stride, eDXRegI limit_hi, nadxRegI tmp, eFlagsReg flags) %{
11937 match(Set limit (LoopLimit (Binary init limit) stride));
11938 effect(TEMP limit_hi, TEMP tmp, KILL flags);
11939 ins_cost(300);
11941 format %{ "loopLimit $init,$limit,$stride # $limit = $init + $stride *( $limit - $init + $stride -1)/ $stride, kills $limit_hi" %}
11942 ins_encode %{
11943 int strd = (int)$stride$$constant;
11944 assert(strd != 1 && strd != -1, "sanity");
11945 int m1 = (strd > 0) ? 1 : -1;
11946 // Convert limit to long (EAX:EDX)
11947 __ cdql();
11948 // Convert init to long (init:tmp)
11949 __ movl($tmp$$Register, $init$$Register);
11950 __ sarl($tmp$$Register, 31);
11951 // $limit - $init
11952 __ subl($limit$$Register, $init$$Register);
11953 __ sbbl($limit_hi$$Register, $tmp$$Register);
11954 // + ($stride - 1)
11955 if (strd > 0) {
11956 __ addl($limit$$Register, (strd - 1));
11957 __ adcl($limit_hi$$Register, 0);
11958 __ movl($tmp$$Register, strd);
11959 } else {
11960 __ addl($limit$$Register, (strd + 1));
11961 __ adcl($limit_hi$$Register, -1);
11962 __ lneg($limit_hi$$Register, $limit$$Register);
11963 __ movl($tmp$$Register, -strd);
11964 }
11965 // signed devision: (EAX:EDX) / pos_stride
11966 __ idivl($tmp$$Register);
11967 if (strd < 0) {
11968 // restore sign
11969 __ negl($tmp$$Register);
11970 }
11971 // (EAX) * stride
11972 __ mull($tmp$$Register);
11973 // + init (ignore upper bits)
11974 __ addl($limit$$Register, $init$$Register);
11975 %}
11976 ins_pipe( pipe_slow );
11977 %}
11979 // ============================================================================
11980 // Branch Instructions
11981 // Jump Table
11982 instruct jumpXtnd(rRegI switch_val) %{
11983 match(Jump switch_val);
11984 ins_cost(350);
11985 format %{ "JMP [$constantaddress](,$switch_val,1)\n\t" %}
11986 ins_encode %{
11987 // Jump to Address(table_base + switch_reg)
11988 Address index(noreg, $switch_val$$Register, Address::times_1);
11989 __ jump(ArrayAddress($constantaddress, index));
11990 %}
11991 ins_pipe(pipe_jmp);
11992 %}
11994 // Jump Direct - Label defines a relative address from JMP+1
11995 instruct jmpDir(label labl) %{
11996 match(Goto);
11997 effect(USE labl);
11999 ins_cost(300);
12000 format %{ "JMP $labl" %}
12001 size(5);
12002 ins_encode %{
12003 Label* L = $labl$$label;
12004 __ jmp(*L, false); // Always long jump
12005 %}
12006 ins_pipe( pipe_jmp );
12007 %}
12009 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12010 instruct jmpCon(cmpOp cop, eFlagsReg cr, label labl) %{
12011 match(If cop cr);
12012 effect(USE labl);
12014 ins_cost(300);
12015 format %{ "J$cop $labl" %}
12016 size(6);
12017 ins_encode %{
12018 Label* L = $labl$$label;
12019 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12020 %}
12021 ins_pipe( pipe_jcc );
12022 %}
12024 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12025 instruct jmpLoopEnd(cmpOp cop, eFlagsReg cr, label labl) %{
12026 match(CountedLoopEnd cop cr);
12027 effect(USE labl);
12029 ins_cost(300);
12030 format %{ "J$cop $labl\t# Loop end" %}
12031 size(6);
12032 ins_encode %{
12033 Label* L = $labl$$label;
12034 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12035 %}
12036 ins_pipe( pipe_jcc );
12037 %}
12039 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12040 instruct jmpLoopEndU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12041 match(CountedLoopEnd cop cmp);
12042 effect(USE labl);
12044 ins_cost(300);
12045 format %{ "J$cop,u $labl\t# Loop end" %}
12046 size(6);
12047 ins_encode %{
12048 Label* L = $labl$$label;
12049 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12050 %}
12051 ins_pipe( pipe_jcc );
12052 %}
12054 instruct jmpLoopEndUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12055 match(CountedLoopEnd cop cmp);
12056 effect(USE labl);
12058 ins_cost(200);
12059 format %{ "J$cop,u $labl\t# Loop end" %}
12060 size(6);
12061 ins_encode %{
12062 Label* L = $labl$$label;
12063 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12064 %}
12065 ins_pipe( pipe_jcc );
12066 %}
12068 // Jump Direct Conditional - using unsigned comparison
12069 instruct jmpConU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12070 match(If cop cmp);
12071 effect(USE labl);
12073 ins_cost(300);
12074 format %{ "J$cop,u $labl" %}
12075 size(6);
12076 ins_encode %{
12077 Label* L = $labl$$label;
12078 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12079 %}
12080 ins_pipe(pipe_jcc);
12081 %}
12083 instruct jmpConUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12084 match(If cop cmp);
12085 effect(USE labl);
12087 ins_cost(200);
12088 format %{ "J$cop,u $labl" %}
12089 size(6);
12090 ins_encode %{
12091 Label* L = $labl$$label;
12092 __ jcc((Assembler::Condition)($cop$$cmpcode), *L, false); // Always long jump
12093 %}
12094 ins_pipe(pipe_jcc);
12095 %}
12097 instruct jmpConUCF2(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
12098 match(If cop cmp);
12099 effect(USE labl);
12101 ins_cost(200);
12102 format %{ $$template
12103 if ($cop$$cmpcode == Assembler::notEqual) {
12104 $$emit$$"JP,u $labl\n\t"
12105 $$emit$$"J$cop,u $labl"
12106 } else {
12107 $$emit$$"JP,u done\n\t"
12108 $$emit$$"J$cop,u $labl\n\t"
12109 $$emit$$"done:"
12110 }
12111 %}
12112 ins_encode %{
12113 Label* l = $labl$$label;
12114 if ($cop$$cmpcode == Assembler::notEqual) {
12115 __ jcc(Assembler::parity, *l, false);
12116 __ jcc(Assembler::notEqual, *l, false);
12117 } else if ($cop$$cmpcode == Assembler::equal) {
12118 Label done;
12119 __ jccb(Assembler::parity, done);
12120 __ jcc(Assembler::equal, *l, false);
12121 __ bind(done);
12122 } else {
12123 ShouldNotReachHere();
12124 }
12125 %}
12126 ins_pipe(pipe_jcc);
12127 %}
12129 // ============================================================================
12130 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass
12131 // array for an instance of the superklass. Set a hidden internal cache on a
12132 // hit (cache is checked with exposed code in gen_subtype_check()). Return
12133 // NZ for a miss or zero for a hit. The encoding ALSO sets flags.
12134 instruct partialSubtypeCheck( eDIRegP result, eSIRegP sub, eAXRegP super, eCXRegI rcx, eFlagsReg cr ) %{
12135 match(Set result (PartialSubtypeCheck sub super));
12136 effect( KILL rcx, KILL cr );
12138 ins_cost(1100); // slightly larger than the next version
12139 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12140 "MOV ECX,[EDI+ArrayKlass::length]\t# length to scan\n\t"
12141 "ADD EDI,ArrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12142 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12143 "JNE,s miss\t\t# Missed: EDI not-zero\n\t"
12144 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache\n\t"
12145 "XOR $result,$result\t\t Hit: EDI zero\n\t"
12146 "miss:\t" %}
12148 opcode(0x1); // Force a XOR of EDI
12149 ins_encode( enc_PartialSubtypeCheck() );
12150 ins_pipe( pipe_slow );
12151 %}
12153 instruct partialSubtypeCheck_vs_Zero( eFlagsReg cr, eSIRegP sub, eAXRegP super, eCXRegI rcx, eDIRegP result, immP0 zero ) %{
12154 match(Set cr (CmpP (PartialSubtypeCheck sub super) zero));
12155 effect( KILL rcx, KILL result );
12157 ins_cost(1000);
12158 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12159 "MOV ECX,[EDI+ArrayKlass::length]\t# length to scan\n\t"
12160 "ADD EDI,ArrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12161 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12162 "JNE,s miss\t\t# Missed: flags NZ\n\t"
12163 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache, flags Z\n\t"
12164 "miss:\t" %}
12166 opcode(0x0); // No need to XOR EDI
12167 ins_encode( enc_PartialSubtypeCheck() );
12168 ins_pipe( pipe_slow );
12169 %}
12171 // ============================================================================
12172 // Branch Instructions -- short offset versions
12173 //
12174 // These instructions are used to replace jumps of a long offset (the default
12175 // match) with jumps of a shorter offset. These instructions are all tagged
12176 // with the ins_short_branch attribute, which causes the ADLC to suppress the
12177 // match rules in general matching. Instead, the ADLC generates a conversion
12178 // method in the MachNode which can be used to do in-place replacement of the
12179 // long variant with the shorter variant. The compiler will determine if a
12180 // branch can be taken by the is_short_branch_offset() predicate in the machine
12181 // specific code section of the file.
12183 // Jump Direct - Label defines a relative address from JMP+1
12184 instruct jmpDir_short(label labl) %{
12185 match(Goto);
12186 effect(USE labl);
12188 ins_cost(300);
12189 format %{ "JMP,s $labl" %}
12190 size(2);
12191 ins_encode %{
12192 Label* L = $labl$$label;
12193 __ jmpb(*L);
12194 %}
12195 ins_pipe( pipe_jmp );
12196 ins_short_branch(1);
12197 %}
12199 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12200 instruct jmpCon_short(cmpOp cop, eFlagsReg cr, label labl) %{
12201 match(If cop cr);
12202 effect(USE labl);
12204 ins_cost(300);
12205 format %{ "J$cop,s $labl" %}
12206 size(2);
12207 ins_encode %{
12208 Label* L = $labl$$label;
12209 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12210 %}
12211 ins_pipe( pipe_jcc );
12212 ins_short_branch(1);
12213 %}
12215 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12216 instruct jmpLoopEnd_short(cmpOp cop, eFlagsReg cr, label labl) %{
12217 match(CountedLoopEnd cop cr);
12218 effect(USE labl);
12220 ins_cost(300);
12221 format %{ "J$cop,s $labl\t# Loop end" %}
12222 size(2);
12223 ins_encode %{
12224 Label* L = $labl$$label;
12225 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12226 %}
12227 ins_pipe( pipe_jcc );
12228 ins_short_branch(1);
12229 %}
12231 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12232 instruct jmpLoopEndU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12233 match(CountedLoopEnd cop cmp);
12234 effect(USE labl);
12236 ins_cost(300);
12237 format %{ "J$cop,us $labl\t# Loop end" %}
12238 size(2);
12239 ins_encode %{
12240 Label* L = $labl$$label;
12241 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12242 %}
12243 ins_pipe( pipe_jcc );
12244 ins_short_branch(1);
12245 %}
12247 instruct jmpLoopEndUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12248 match(CountedLoopEnd cop cmp);
12249 effect(USE labl);
12251 ins_cost(300);
12252 format %{ "J$cop,us $labl\t# Loop end" %}
12253 size(2);
12254 ins_encode %{
12255 Label* L = $labl$$label;
12256 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12257 %}
12258 ins_pipe( pipe_jcc );
12259 ins_short_branch(1);
12260 %}
12262 // Jump Direct Conditional - using unsigned comparison
12263 instruct jmpConU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12264 match(If cop cmp);
12265 effect(USE labl);
12267 ins_cost(300);
12268 format %{ "J$cop,us $labl" %}
12269 size(2);
12270 ins_encode %{
12271 Label* L = $labl$$label;
12272 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12273 %}
12274 ins_pipe( pipe_jcc );
12275 ins_short_branch(1);
12276 %}
12278 instruct jmpConUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12279 match(If cop cmp);
12280 effect(USE labl);
12282 ins_cost(300);
12283 format %{ "J$cop,us $labl" %}
12284 size(2);
12285 ins_encode %{
12286 Label* L = $labl$$label;
12287 __ jccb((Assembler::Condition)($cop$$cmpcode), *L);
12288 %}
12289 ins_pipe( pipe_jcc );
12290 ins_short_branch(1);
12291 %}
12293 instruct jmpConUCF2_short(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
12294 match(If cop cmp);
12295 effect(USE labl);
12297 ins_cost(300);
12298 format %{ $$template
12299 if ($cop$$cmpcode == Assembler::notEqual) {
12300 $$emit$$"JP,u,s $labl\n\t"
12301 $$emit$$"J$cop,u,s $labl"
12302 } else {
12303 $$emit$$"JP,u,s done\n\t"
12304 $$emit$$"J$cop,u,s $labl\n\t"
12305 $$emit$$"done:"
12306 }
12307 %}
12308 size(4);
12309 ins_encode %{
12310 Label* l = $labl$$label;
12311 if ($cop$$cmpcode == Assembler::notEqual) {
12312 __ jccb(Assembler::parity, *l);
12313 __ jccb(Assembler::notEqual, *l);
12314 } else if ($cop$$cmpcode == Assembler::equal) {
12315 Label done;
12316 __ jccb(Assembler::parity, done);
12317 __ jccb(Assembler::equal, *l);
12318 __ bind(done);
12319 } else {
12320 ShouldNotReachHere();
12321 }
12322 %}
12323 ins_pipe(pipe_jcc);
12324 ins_short_branch(1);
12325 %}
12327 // ============================================================================
12328 // Long Compare
12329 //
12330 // Currently we hold longs in 2 registers. Comparing such values efficiently
12331 // is tricky. The flavor of compare used depends on whether we are testing
12332 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit.
12333 // The GE test is the negated LT test. The LE test can be had by commuting
12334 // the operands (yielding a GE test) and then negating; negate again for the
12335 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the
12336 // NE test is negated from that.
12338 // Due to a shortcoming in the ADLC, it mixes up expressions like:
12339 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the
12340 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections
12341 // are collapsed internally in the ADLC's dfa-gen code. The match for
12342 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the
12343 // foo match ends up with the wrong leaf. One fix is to not match both
12344 // reg-reg and reg-zero forms of long-compare. This is unfortunate because
12345 // both forms beat the trinary form of long-compare and both are very useful
12346 // on Intel which has so few registers.
12348 // Manifest a CmpL result in an integer register. Very painful.
12349 // This is the test to avoid.
12350 instruct cmpL3_reg_reg(eSIRegI dst, eRegL src1, eRegL src2, eFlagsReg flags ) %{
12351 match(Set dst (CmpL3 src1 src2));
12352 effect( KILL flags );
12353 ins_cost(1000);
12354 format %{ "XOR $dst,$dst\n\t"
12355 "CMP $src1.hi,$src2.hi\n\t"
12356 "JLT,s m_one\n\t"
12357 "JGT,s p_one\n\t"
12358 "CMP $src1.lo,$src2.lo\n\t"
12359 "JB,s m_one\n\t"
12360 "JEQ,s done\n"
12361 "p_one:\tINC $dst\n\t"
12362 "JMP,s done\n"
12363 "m_one:\tDEC $dst\n"
12364 "done:" %}
12365 ins_encode %{
12366 Label p_one, m_one, done;
12367 __ xorptr($dst$$Register, $dst$$Register);
12368 __ cmpl(HIGH_FROM_LOW($src1$$Register), HIGH_FROM_LOW($src2$$Register));
12369 __ jccb(Assembler::less, m_one);
12370 __ jccb(Assembler::greater, p_one);
12371 __ cmpl($src1$$Register, $src2$$Register);
12372 __ jccb(Assembler::below, m_one);
12373 __ jccb(Assembler::equal, done);
12374 __ bind(p_one);
12375 __ incrementl($dst$$Register);
12376 __ jmpb(done);
12377 __ bind(m_one);
12378 __ decrementl($dst$$Register);
12379 __ bind(done);
12380 %}
12381 ins_pipe( pipe_slow );
12382 %}
12384 //======
12385 // Manifest a CmpL result in the normal flags. Only good for LT or GE
12386 // compares. Can be used for LE or GT compares by reversing arguments.
12387 // NOT GOOD FOR EQ/NE tests.
12388 instruct cmpL_zero_flags_LTGE( flagsReg_long_LTGE flags, eRegL src, immL0 zero ) %{
12389 match( Set flags (CmpL src zero ));
12390 ins_cost(100);
12391 format %{ "TEST $src.hi,$src.hi" %}
12392 opcode(0x85);
12393 ins_encode( OpcP, RegReg_Hi2( src, src ) );
12394 ins_pipe( ialu_cr_reg_reg );
12395 %}
12397 // Manifest a CmpL result in the normal flags. Only good for LT or GE
12398 // compares. Can be used for LE or GT compares by reversing arguments.
12399 // NOT GOOD FOR EQ/NE tests.
12400 instruct cmpL_reg_flags_LTGE( flagsReg_long_LTGE flags, eRegL src1, eRegL src2, rRegI tmp ) %{
12401 match( Set flags (CmpL src1 src2 ));
12402 effect( TEMP tmp );
12403 ins_cost(300);
12404 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
12405 "MOV $tmp,$src1.hi\n\t"
12406 "SBB $tmp,$src2.hi\t! Compute flags for long compare" %}
12407 ins_encode( long_cmp_flags2( src1, src2, tmp ) );
12408 ins_pipe( ialu_cr_reg_reg );
12409 %}
12411 // Long compares reg < zero/req OR reg >= zero/req.
12412 // Just a wrapper for a normal branch, plus the predicate test.
12413 instruct cmpL_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, label labl) %{
12414 match(If cmp flags);
12415 effect(USE labl);
12416 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12417 expand %{
12418 jmpCon(cmp,flags,labl); // JLT or JGE...
12419 %}
12420 %}
12422 //======
12423 // Manifest a CmpUL result in the normal flags. Only good for LT or GE
12424 // compares. Can be used for LE or GT compares by reversing arguments.
12425 // NOT GOOD FOR EQ/NE tests.
12426 instruct cmpUL_zero_flags_LTGE(flagsReg_ulong_LTGE flags, eRegL src, immL0 zero) %{
12427 match(Set flags (CmpUL src zero));
12428 ins_cost(100);
12429 format %{ "TEST $src.hi,$src.hi" %}
12430 opcode(0x85);
12431 ins_encode(OpcP, RegReg_Hi2(src, src));
12432 ins_pipe(ialu_cr_reg_reg);
12433 %}
12435 // Manifest a CmpUL result in the normal flags. Only good for LT or GE
12436 // compares. Can be used for LE or GT compares by reversing arguments.
12437 // NOT GOOD FOR EQ/NE tests.
12438 instruct cmpUL_reg_flags_LTGE(flagsReg_ulong_LTGE flags, eRegL src1, eRegL src2, rRegI tmp) %{
12439 match(Set flags (CmpUL src1 src2));
12440 effect(TEMP tmp);
12441 ins_cost(300);
12442 format %{ "CMP $src1.lo,$src2.lo\t! Unsigned long compare; set flags for low bits\n\t"
12443 "MOV $tmp,$src1.hi\n\t"
12444 "SBB $tmp,$src2.hi\t! Compute flags for unsigned long compare" %}
12445 ins_encode(long_cmp_flags2(src1, src2, tmp));
12446 ins_pipe(ialu_cr_reg_reg);
12447 %}
12449 // Unsigned long compares reg < zero/req OR reg >= zero/req.
12450 // Just a wrapper for a normal branch, plus the predicate test.
12451 instruct cmpUL_LTGE(cmpOpU cmp, flagsReg_ulong_LTGE flags, label labl) %{
12452 match(If cmp flags);
12453 effect(USE labl);
12454 predicate(_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge);
12455 expand %{
12456 jmpCon(cmp, flags, labl); // JLT or JGE...
12457 %}
12458 %}
12460 // Compare 2 longs and CMOVE longs.
12461 instruct cmovLL_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, eRegL src) %{
12462 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12463 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12464 ins_cost(400);
12465 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12466 "CMOV$cmp $dst.hi,$src.hi" %}
12467 opcode(0x0F,0x40);
12468 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12469 ins_pipe( pipe_cmov_reg_long );
12470 %}
12472 instruct cmovLL_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, load_long_memory src) %{
12473 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12474 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12475 ins_cost(500);
12476 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12477 "CMOV$cmp $dst.hi,$src.hi" %}
12478 opcode(0x0F,0x40);
12479 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12480 ins_pipe( pipe_cmov_reg_long );
12481 %}
12483 // Compare 2 longs and CMOVE ints.
12484 instruct cmovII_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, rRegI dst, rRegI src) %{
12485 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12486 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12487 ins_cost(200);
12488 format %{ "CMOV$cmp $dst,$src" %}
12489 opcode(0x0F,0x40);
12490 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12491 ins_pipe( pipe_cmov_reg );
12492 %}
12494 instruct cmovII_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, rRegI dst, memory src) %{
12495 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12496 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12497 ins_cost(250);
12498 format %{ "CMOV$cmp $dst,$src" %}
12499 opcode(0x0F,0x40);
12500 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12501 ins_pipe( pipe_cmov_mem );
12502 %}
12504 // Compare 2 longs and CMOVE ints.
12505 instruct cmovPP_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegP dst, eRegP src) %{
12506 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
12507 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12508 ins_cost(200);
12509 format %{ "CMOV$cmp $dst,$src" %}
12510 opcode(0x0F,0x40);
12511 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12512 ins_pipe( pipe_cmov_reg );
12513 %}
12515 // Compare 2 longs and CMOVE doubles
12516 instruct cmovDDPR_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regDPR dst, regDPR src) %{
12517 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12518 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12519 ins_cost(200);
12520 expand %{
12521 fcmovDPR_regS(cmp,flags,dst,src);
12522 %}
12523 %}
12525 // Compare 2 longs and CMOVE doubles
12526 instruct cmovDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regD dst, regD src) %{
12527 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12528 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12529 ins_cost(200);
12530 expand %{
12531 fcmovD_regS(cmp,flags,dst,src);
12532 %}
12533 %}
12535 instruct cmovFFPR_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regFPR dst, regFPR src) %{
12536 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12537 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12538 ins_cost(200);
12539 expand %{
12540 fcmovFPR_regS(cmp,flags,dst,src);
12541 %}
12542 %}
12544 instruct cmovFF_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regF dst, regF src) %{
12545 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
12546 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12547 ins_cost(200);
12548 expand %{
12549 fcmovF_regS(cmp,flags,dst,src);
12550 %}
12551 %}
12553 //======
12554 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
12555 instruct cmpL_zero_flags_EQNE( flagsReg_long_EQNE flags, eRegL src, immL0 zero, rRegI tmp ) %{
12556 match( Set flags (CmpL src zero ));
12557 effect(TEMP tmp);
12558 ins_cost(200);
12559 format %{ "MOV $tmp,$src.lo\n\t"
12560 "OR $tmp,$src.hi\t! Long is EQ/NE 0?" %}
12561 ins_encode( long_cmp_flags0( src, tmp ) );
12562 ins_pipe( ialu_reg_reg_long );
12563 %}
12565 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
12566 instruct cmpL_reg_flags_EQNE( flagsReg_long_EQNE flags, eRegL src1, eRegL src2 ) %{
12567 match( Set flags (CmpL src1 src2 ));
12568 ins_cost(200+300);
12569 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
12570 "JNE,s skip\n\t"
12571 "CMP $src1.hi,$src2.hi\n\t"
12572 "skip:\t" %}
12573 ins_encode( long_cmp_flags1( src1, src2 ) );
12574 ins_pipe( ialu_cr_reg_reg );
12575 %}
12577 // Long compare reg == zero/reg OR reg != zero/reg
12578 // Just a wrapper for a normal branch, plus the predicate test.
12579 instruct cmpL_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, label labl) %{
12580 match(If cmp flags);
12581 effect(USE labl);
12582 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12583 expand %{
12584 jmpCon(cmp,flags,labl); // JEQ or JNE...
12585 %}
12586 %}
12588 //======
12589 // Manifest a CmpUL result in the normal flags. Only good for EQ/NE compares.
12590 instruct cmpUL_zero_flags_EQNE(flagsReg_ulong_EQNE flags, eRegL src, immL0 zero, rRegI tmp) %{
12591 match(Set flags (CmpUL src zero));
12592 effect(TEMP tmp);
12593 ins_cost(200);
12594 format %{ "MOV $tmp,$src.lo\n\t"
12595 "OR $tmp,$src.hi\t! Unsigned long is EQ/NE 0?" %}
12596 ins_encode(long_cmp_flags0(src, tmp));
12597 ins_pipe(ialu_reg_reg_long);
12598 %}
12600 // Manifest a CmpUL result in the normal flags. Only good for EQ/NE compares.
12601 instruct cmpUL_reg_flags_EQNE(flagsReg_ulong_EQNE flags, eRegL src1, eRegL src2) %{
12602 match(Set flags (CmpUL src1 src2));
12603 ins_cost(200+300);
12604 format %{ "CMP $src1.lo,$src2.lo\t! Unsigned long compare; set flags for low bits\n\t"
12605 "JNE,s skip\n\t"
12606 "CMP $src1.hi,$src2.hi\n\t"
12607 "skip:\t" %}
12608 ins_encode(long_cmp_flags1(src1, src2));
12609 ins_pipe(ialu_cr_reg_reg);
12610 %}
12612 // Unsigned long compare reg == zero/reg OR reg != zero/reg
12613 // Just a wrapper for a normal branch, plus the predicate test.
12614 instruct cmpUL_EQNE(cmpOpU cmp, flagsReg_ulong_EQNE flags, label labl) %{
12615 match(If cmp flags);
12616 effect(USE labl);
12617 predicate(_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne);
12618 expand %{
12619 jmpCon(cmp, flags, labl); // JEQ or JNE...
12620 %}
12621 %}
12623 // Compare 2 longs and CMOVE longs.
12624 instruct cmovLL_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, eRegL src) %{
12625 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12626 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12627 ins_cost(400);
12628 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12629 "CMOV$cmp $dst.hi,$src.hi" %}
12630 opcode(0x0F,0x40);
12631 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12632 ins_pipe( pipe_cmov_reg_long );
12633 %}
12635 instruct cmovLL_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, load_long_memory src) %{
12636 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12637 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12638 ins_cost(500);
12639 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12640 "CMOV$cmp $dst.hi,$src.hi" %}
12641 opcode(0x0F,0x40);
12642 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12643 ins_pipe( pipe_cmov_reg_long );
12644 %}
12646 // Compare 2 longs and CMOVE ints.
12647 instruct cmovII_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, rRegI dst, rRegI src) %{
12648 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12649 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12650 ins_cost(200);
12651 format %{ "CMOV$cmp $dst,$src" %}
12652 opcode(0x0F,0x40);
12653 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12654 ins_pipe( pipe_cmov_reg );
12655 %}
12657 instruct cmovII_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, rRegI dst, memory src) %{
12658 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12659 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12660 ins_cost(250);
12661 format %{ "CMOV$cmp $dst,$src" %}
12662 opcode(0x0F,0x40);
12663 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12664 ins_pipe( pipe_cmov_mem );
12665 %}
12667 // Compare 2 longs and CMOVE ints.
12668 instruct cmovPP_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegP dst, eRegP src) %{
12669 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
12670 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12671 ins_cost(200);
12672 format %{ "CMOV$cmp $dst,$src" %}
12673 opcode(0x0F,0x40);
12674 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12675 ins_pipe( pipe_cmov_reg );
12676 %}
12678 // Compare 2 longs and CMOVE doubles
12679 instruct cmovDDPR_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regDPR dst, regDPR src) %{
12680 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12681 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12682 ins_cost(200);
12683 expand %{
12684 fcmovDPR_regS(cmp,flags,dst,src);
12685 %}
12686 %}
12688 // Compare 2 longs and CMOVE doubles
12689 instruct cmovDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regD dst, regD src) %{
12690 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12691 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12692 ins_cost(200);
12693 expand %{
12694 fcmovD_regS(cmp,flags,dst,src);
12695 %}
12696 %}
12698 instruct cmovFFPR_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regFPR dst, regFPR src) %{
12699 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12700 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12701 ins_cost(200);
12702 expand %{
12703 fcmovFPR_regS(cmp,flags,dst,src);
12704 %}
12705 %}
12707 instruct cmovFF_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regF dst, regF src) %{
12708 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
12709 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12710 ins_cost(200);
12711 expand %{
12712 fcmovF_regS(cmp,flags,dst,src);
12713 %}
12714 %}
12716 //======
12717 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
12718 // Same as cmpL_reg_flags_LEGT except must negate src
12719 instruct cmpL_zero_flags_LEGT( flagsReg_long_LEGT flags, eRegL src, immL0 zero, rRegI tmp ) %{
12720 match( Set flags (CmpL src zero ));
12721 effect( TEMP tmp );
12722 ins_cost(300);
12723 format %{ "XOR $tmp,$tmp\t# Long compare for -$src < 0, use commuted test\n\t"
12724 "CMP $tmp,$src.lo\n\t"
12725 "SBB $tmp,$src.hi\n\t" %}
12726 ins_encode( long_cmp_flags3(src, tmp) );
12727 ins_pipe( ialu_reg_reg_long );
12728 %}
12730 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
12731 // Same as cmpL_reg_flags_LTGE except operands swapped. Swapping operands
12732 // requires a commuted test to get the same result.
12733 instruct cmpL_reg_flags_LEGT( flagsReg_long_LEGT flags, eRegL src1, eRegL src2, rRegI tmp ) %{
12734 match( Set flags (CmpL src1 src2 ));
12735 effect( TEMP tmp );
12736 ins_cost(300);
12737 format %{ "CMP $src2.lo,$src1.lo\t! Long compare, swapped operands, use with commuted test\n\t"
12738 "MOV $tmp,$src2.hi\n\t"
12739 "SBB $tmp,$src1.hi\t! Compute flags for long compare" %}
12740 ins_encode( long_cmp_flags2( src2, src1, tmp ) );
12741 ins_pipe( ialu_cr_reg_reg );
12742 %}
12744 // Long compares reg < zero/req OR reg >= zero/req.
12745 // Just a wrapper for a normal branch, plus the predicate test
12746 instruct cmpL_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, label labl) %{
12747 match(If cmp flags);
12748 effect(USE labl);
12749 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le );
12750 ins_cost(300);
12751 expand %{
12752 jmpCon(cmp,flags,labl); // JGT or JLE...
12753 %}
12754 %}
12756 //======
12757 // Manifest a CmpUL result in the normal flags. Only good for LE or GT compares.
12758 // Same as cmpUL_reg_flags_LEGT except must negate src
12759 instruct cmpUL_zero_flags_LEGT(flagsReg_ulong_LEGT flags, eRegL src, immL0 zero, rRegI tmp) %{
12760 match(Set flags (CmpUL src zero));
12761 effect(TEMP tmp);
12762 ins_cost(300);
12763 format %{ "XOR $tmp,$tmp\t# Unsigned long compare for -$src < 0, use commuted test\n\t"
12764 "CMP $tmp,$src.lo\n\t"
12765 "SBB $tmp,$src.hi\n\t" %}
12766 ins_encode(long_cmp_flags3(src, tmp));
12767 ins_pipe(ialu_reg_reg_long);
12768 %}
12770 // Manifest a CmpUL result in the normal flags. Only good for LE or GT compares.
12771 // Same as cmpUL_reg_flags_LTGE except operands swapped. Swapping operands
12772 // requires a commuted test to get the same result.
12773 instruct cmpUL_reg_flags_LEGT(flagsReg_ulong_LEGT flags, eRegL src1, eRegL src2, rRegI tmp) %{
12774 match(Set flags (CmpUL src1 src2));
12775 effect(TEMP tmp);
12776 ins_cost(300);
12777 format %{ "CMP $src2.lo,$src1.lo\t! Unsigned long compare, swapped operands, use with commuted test\n\t"
12778 "MOV $tmp,$src2.hi\n\t"
12779 "SBB $tmp,$src1.hi\t! Compute flags for unsigned long compare" %}
12780 ins_encode(long_cmp_flags2( src2, src1, tmp));
12781 ins_pipe(ialu_cr_reg_reg);
12782 %}
12784 // Unsigned long compares reg < zero/req OR reg >= zero/req.
12785 // Just a wrapper for a normal branch, plus the predicate test
12786 instruct cmpUL_LEGT(cmpOpU_commute cmp, flagsReg_ulong_LEGT flags, label labl) %{
12787 match(If cmp flags);
12788 effect(USE labl);
12789 predicate(_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le);
12790 ins_cost(300);
12791 expand %{
12792 jmpCon(cmp, flags, labl); // JGT or JLE...
12793 %}
12794 %}
12796 // Compare 2 longs and CMOVE longs.
12797 instruct cmovLL_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, eRegL src) %{
12798 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
12799 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12800 ins_cost(400);
12801 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12802 "CMOV$cmp $dst.hi,$src.hi" %}
12803 opcode(0x0F,0x40);
12804 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
12805 ins_pipe( pipe_cmov_reg_long );
12806 %}
12808 instruct cmovLL_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, load_long_memory src) %{
12809 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
12810 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12811 ins_cost(500);
12812 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
12813 "CMOV$cmp $dst.hi,$src.hi+4" %}
12814 opcode(0x0F,0x40);
12815 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
12816 ins_pipe( pipe_cmov_reg_long );
12817 %}
12819 // Compare 2 longs and CMOVE ints.
12820 instruct cmovII_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, rRegI dst, rRegI src) %{
12821 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12822 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
12823 ins_cost(200);
12824 format %{ "CMOV$cmp $dst,$src" %}
12825 opcode(0x0F,0x40);
12826 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12827 ins_pipe( pipe_cmov_reg );
12828 %}
12830 instruct cmovII_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, rRegI dst, memory src) %{
12831 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12832 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
12833 ins_cost(250);
12834 format %{ "CMOV$cmp $dst,$src" %}
12835 opcode(0x0F,0x40);
12836 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
12837 ins_pipe( pipe_cmov_mem );
12838 %}
12840 // Compare 2 longs and CMOVE ptrs.
12841 instruct cmovPP_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegP dst, eRegP src) %{
12842 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
12843 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
12844 ins_cost(200);
12845 format %{ "CMOV$cmp $dst,$src" %}
12846 opcode(0x0F,0x40);
12847 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
12848 ins_pipe( pipe_cmov_reg );
12849 %}
12851 // Compare 2 longs and CMOVE doubles
12852 instruct cmovDDPR_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regDPR dst, regDPR src) %{
12853 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12854 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12855 ins_cost(200);
12856 expand %{
12857 fcmovDPR_regS(cmp,flags,dst,src);
12858 %}
12859 %}
12861 // Compare 2 longs and CMOVE doubles
12862 instruct cmovDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regD dst, regD src) %{
12863 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12864 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
12865 ins_cost(200);
12866 expand %{
12867 fcmovD_regS(cmp,flags,dst,src);
12868 %}
12869 %}
12871 instruct cmovFFPR_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regFPR dst, regFPR src) %{
12872 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12873 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12874 ins_cost(200);
12875 expand %{
12876 fcmovFPR_regS(cmp,flags,dst,src);
12877 %}
12878 %}
12881 instruct cmovFF_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regF dst, regF src) %{
12882 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
12883 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
12884 ins_cost(200);
12885 expand %{
12886 fcmovF_regS(cmp,flags,dst,src);
12887 %}
12888 %}
12891 // ============================================================================
12892 // Procedure Call/Return Instructions
12893 // Call Java Static Instruction
12894 // Note: If this code changes, the corresponding ret_addr_offset() and
12895 // compute_padding() functions will have to be adjusted.
12896 instruct CallStaticJavaDirect(method meth) %{
12897 match(CallStaticJava);
12898 effect(USE meth);
12900 ins_cost(300);
12901 format %{ "CALL,static " %}
12902 opcode(0xE8); /* E8 cd */
12903 ins_encode( pre_call_resets,
12904 Java_Static_Call( meth ),
12905 call_epilog,
12906 post_call_FPU );
12907 ins_pipe( pipe_slow );
12908 ins_alignment(4);
12909 %}
12911 // Call Java Dynamic Instruction
12912 // Note: If this code changes, the corresponding ret_addr_offset() and
12913 // compute_padding() functions will have to be adjusted.
12914 instruct CallDynamicJavaDirect(method meth) %{
12915 match(CallDynamicJava);
12916 effect(USE meth);
12918 ins_cost(300);
12919 format %{ "MOV EAX,(oop)-1\n\t"
12920 "CALL,dynamic" %}
12921 opcode(0xE8); /* E8 cd */
12922 ins_encode( pre_call_resets,
12923 Java_Dynamic_Call( meth ),
12924 call_epilog,
12925 post_call_FPU );
12926 ins_pipe( pipe_slow );
12927 ins_alignment(4);
12928 %}
12930 // Call Runtime Instruction
12931 instruct CallRuntimeDirect(method meth) %{
12932 match(CallRuntime );
12933 effect(USE meth);
12935 ins_cost(300);
12936 format %{ "CALL,runtime " %}
12937 opcode(0xE8); /* E8 cd */
12938 // Use FFREEs to clear entries in float stack
12939 ins_encode( pre_call_resets,
12940 FFree_Float_Stack_All,
12941 Java_To_Runtime( meth ),
12942 post_call_FPU );
12943 ins_pipe( pipe_slow );
12944 %}
12946 // Call runtime without safepoint
12947 instruct CallLeafDirect(method meth) %{
12948 match(CallLeaf);
12949 effect(USE meth);
12951 ins_cost(300);
12952 format %{ "CALL_LEAF,runtime " %}
12953 opcode(0xE8); /* E8 cd */
12954 ins_encode( pre_call_resets,
12955 FFree_Float_Stack_All,
12956 Java_To_Runtime( meth ),
12957 Verify_FPU_For_Leaf, post_call_FPU );
12958 ins_pipe( pipe_slow );
12959 %}
12961 instruct CallLeafNoFPDirect(method meth) %{
12962 match(CallLeafNoFP);
12963 effect(USE meth);
12965 ins_cost(300);
12966 format %{ "CALL_LEAF_NOFP,runtime " %}
12967 opcode(0xE8); /* E8 cd */
12968 ins_encode(Java_To_Runtime(meth));
12969 ins_pipe( pipe_slow );
12970 %}
12973 // Return Instruction
12974 // Remove the return address & jump to it.
12975 instruct Ret() %{
12976 match(Return);
12977 format %{ "RET" %}
12978 opcode(0xC3);
12979 ins_encode(OpcP);
12980 ins_pipe( pipe_jmp );
12981 %}
12983 // Tail Call; Jump from runtime stub to Java code.
12984 // Also known as an 'interprocedural jump'.
12985 // Target of jump will eventually return to caller.
12986 // TailJump below removes the return address.
12987 instruct TailCalljmpInd(eRegP_no_EBP jump_target, eBXRegP method_oop) %{
12988 match(TailCall jump_target method_oop );
12989 ins_cost(300);
12990 format %{ "JMP $jump_target \t# EBX holds method oop" %}
12991 opcode(0xFF, 0x4); /* Opcode FF /4 */
12992 ins_encode( OpcP, RegOpc(jump_target) );
12993 ins_pipe( pipe_jmp );
12994 %}
12997 // Tail Jump; remove the return address; jump to target.
12998 // TailCall above leaves the return address around.
12999 instruct tailjmpInd(eRegP_no_EBP jump_target, eAXRegP ex_oop) %{
13000 match( TailJump jump_target ex_oop );
13001 ins_cost(300);
13002 format %{ "POP EDX\t# pop return address into dummy\n\t"
13003 "JMP $jump_target " %}
13004 opcode(0xFF, 0x4); /* Opcode FF /4 */
13005 ins_encode( enc_pop_rdx,
13006 OpcP, RegOpc(jump_target) );
13007 ins_pipe( pipe_jmp );
13008 %}
13010 // Create exception oop: created by stack-crawling runtime code.
13011 // Created exception is now available to this handler, and is setup
13012 // just prior to jumping to this handler. No code emitted.
13013 instruct CreateException( eAXRegP ex_oop )
13014 %{
13015 match(Set ex_oop (CreateEx));
13017 size(0);
13018 // use the following format syntax
13019 format %{ "# exception oop is in EAX; no code emitted" %}
13020 ins_encode();
13021 ins_pipe( empty );
13022 %}
13025 // Rethrow exception:
13026 // The exception oop will come in the first argument position.
13027 // Then JUMP (not call) to the rethrow stub code.
13028 instruct RethrowException()
13029 %{
13030 match(Rethrow);
13032 // use the following format syntax
13033 format %{ "JMP rethrow_stub" %}
13034 ins_encode(enc_rethrow);
13035 ins_pipe( pipe_jmp );
13036 %}
13038 // inlined locking and unlocking
13040 instruct cmpFastLockRTM(eFlagsReg cr, eRegP object, eBXRegP box, eAXRegI tmp, eDXRegI scr, rRegI cx1, rRegI cx2) %{
13041 predicate(Compile::current()->use_rtm());
13042 match(Set cr (FastLock object box));
13043 effect(TEMP tmp, TEMP scr, TEMP cx1, TEMP cx2, USE_KILL box);
13044 ins_cost(300);
13045 format %{ "FASTLOCK $object,$box\t! kills $box,$tmp,$scr,$cx1,$cx2" %}
13046 ins_encode %{
13047 __ fast_lock($object$$Register, $box$$Register, $tmp$$Register,
13048 $scr$$Register, $cx1$$Register, $cx2$$Register,
13049 _counters, _rtm_counters, _stack_rtm_counters,
13050 ((Method*)(ra_->C->method()->constant_encoding()))->method_data(),
13051 true, ra_->C->profile_rtm());
13052 %}
13053 ins_pipe(pipe_slow);
13054 %}
13056 instruct cmpFastLock(eFlagsReg cr, eRegP object, eBXRegP box, eAXRegI tmp, eRegP scr) %{
13057 predicate(!Compile::current()->use_rtm());
13058 match(Set cr (FastLock object box));
13059 effect(TEMP tmp, TEMP scr, USE_KILL box);
13060 ins_cost(300);
13061 format %{ "FASTLOCK $object,$box\t! kills $box,$tmp,$scr" %}
13062 ins_encode %{
13063 __ fast_lock($object$$Register, $box$$Register, $tmp$$Register,
13064 $scr$$Register, noreg, noreg, _counters, NULL, NULL, NULL, false, false);
13065 %}
13066 ins_pipe(pipe_slow);
13067 %}
13069 instruct cmpFastUnlock(eFlagsReg cr, eRegP object, eAXRegP box, eRegP tmp ) %{
13070 match(Set cr (FastUnlock object box));
13071 effect(TEMP tmp, USE_KILL box);
13072 ins_cost(300);
13073 format %{ "FASTUNLOCK $object,$box\t! kills $box,$tmp" %}
13074 ins_encode %{
13075 __ fast_unlock($object$$Register, $box$$Register, $tmp$$Register, ra_->C->use_rtm());
13076 %}
13077 ins_pipe(pipe_slow);
13078 %}
13082 // ============================================================================
13083 // Safepoint Instruction
13084 instruct safePoint_poll(eFlagsReg cr) %{
13085 match(SafePoint);
13086 effect(KILL cr);
13088 // TODO-FIXME: we currently poll at offset 0 of the safepoint polling page.
13089 // On SPARC that might be acceptable as we can generate the address with
13090 // just a sethi, saving an or. By polling at offset 0 we can end up
13091 // putting additional pressure on the index-0 in the D$. Because of
13092 // alignment (just like the situation at hand) the lower indices tend
13093 // to see more traffic. It'd be better to change the polling address
13094 // to offset 0 of the last $line in the polling page.
13096 format %{ "TSTL #polladdr,EAX\t! Safepoint: poll for GC" %}
13097 ins_cost(125);
13098 size(6) ;
13099 ins_encode( Safepoint_Poll() );
13100 ins_pipe( ialu_reg_mem );
13101 %}
13104 // ============================================================================
13105 // This name is KNOWN by the ADLC and cannot be changed.
13106 // The ADLC forces a 'TypeRawPtr::BOTTOM' output type
13107 // for this guy.
13108 instruct tlsLoadP(eRegP dst, eFlagsReg cr) %{
13109 match(Set dst (ThreadLocal));
13110 effect(DEF dst, KILL cr);
13112 format %{ "MOV $dst, Thread::current()" %}
13113 ins_encode %{
13114 Register dstReg = as_Register($dst$$reg);
13115 __ get_thread(dstReg);
13116 %}
13117 ins_pipe( ialu_reg_fat );
13118 %}
13122 //----------PEEPHOLE RULES-----------------------------------------------------
13123 // These must follow all instruction definitions as they use the names
13124 // defined in the instructions definitions.
13125 //
13126 // peepmatch ( root_instr_name [preceding_instruction]* );
13127 //
13128 // peepconstraint %{
13129 // (instruction_number.operand_name relational_op instruction_number.operand_name
13130 // [, ...] );
13131 // // instruction numbers are zero-based using left to right order in peepmatch
13132 //
13133 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) );
13134 // // provide an instruction_number.operand_name for each operand that appears
13135 // // in the replacement instruction's match rule
13136 //
13137 // ---------VM FLAGS---------------------------------------------------------
13138 //
13139 // All peephole optimizations can be turned off using -XX:-OptoPeephole
13140 //
13141 // Each peephole rule is given an identifying number starting with zero and
13142 // increasing by one in the order seen by the parser. An individual peephole
13143 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=#
13144 // on the command-line.
13145 //
13146 // ---------CURRENT LIMITATIONS----------------------------------------------
13147 //
13148 // Only match adjacent instructions in same basic block
13149 // Only equality constraints
13150 // Only constraints between operands, not (0.dest_reg == EAX_enc)
13151 // Only one replacement instruction
13152 //
13153 // ---------EXAMPLE----------------------------------------------------------
13154 //
13155 // // pertinent parts of existing instructions in architecture description
13156 // instruct movI(rRegI dst, rRegI src) %{
13157 // match(Set dst (CopyI src));
13158 // %}
13159 //
13160 // instruct incI_eReg(rRegI dst, immI1 src, eFlagsReg cr) %{
13161 // match(Set dst (AddI dst src));
13162 // effect(KILL cr);
13163 // %}
13164 //
13165 // // Change (inc mov) to lea
13166 // peephole %{
13167 // // increment preceeded by register-register move
13168 // peepmatch ( incI_eReg movI );
13169 // // require that the destination register of the increment
13170 // // match the destination register of the move
13171 // peepconstraint ( 0.dst == 1.dst );
13172 // // construct a replacement instruction that sets
13173 // // the destination to ( move's source register + one )
13174 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13175 // %}
13176 //
13177 // Implementation no longer uses movX instructions since
13178 // machine-independent system no longer uses CopyX nodes.
13179 //
13180 // peephole %{
13181 // peepmatch ( incI_eReg movI );
13182 // peepconstraint ( 0.dst == 1.dst );
13183 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13184 // %}
13185 //
13186 // peephole %{
13187 // peepmatch ( decI_eReg movI );
13188 // peepconstraint ( 0.dst == 1.dst );
13189 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13190 // %}
13191 //
13192 // peephole %{
13193 // peepmatch ( addI_eReg_imm movI );
13194 // peepconstraint ( 0.dst == 1.dst );
13195 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13196 // %}
13197 //
13198 // peephole %{
13199 // peepmatch ( addP_eReg_imm movP );
13200 // peepconstraint ( 0.dst == 1.dst );
13201 // peepreplace ( leaP_eReg_immI( 0.dst 1.src 0.src ) );
13202 // %}
13204 // // Change load of spilled value to only a spill
13205 // instruct storeI(memory mem, rRegI src) %{
13206 // match(Set mem (StoreI mem src));
13207 // %}
13208 //
13209 // instruct loadI(rRegI dst, memory mem) %{
13210 // match(Set dst (LoadI mem));
13211 // %}
13212 //
13213 peephole %{
13214 peepmatch ( loadI storeI );
13215 peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem );
13216 peepreplace ( storeI( 1.mem 1.mem 1.src ) );
13217 %}
13219 //----------SMARTSPILL RULES---------------------------------------------------
13220 // These must follow all instruction definitions as they use the names
13221 // defined in the instructions definitions.