Sat, 07 Nov 2020 10:30:02 +0800
Added tag mips-jdk8u275-b01 for changeset d3b4d62f391f
1 /*
2 * Copyright (c) 2003, 2018, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "interp_masm_x86.hpp"
27 #include "interpreter/interpreter.hpp"
28 #include "interpreter/interpreterRuntime.hpp"
29 #include "oops/arrayOop.hpp"
30 #include "oops/markOop.hpp"
31 #include "oops/methodData.hpp"
32 #include "oops/method.hpp"
33 #include "prims/jvmtiExport.hpp"
34 #include "prims/jvmtiRedefineClassesTrace.hpp"
35 #include "prims/jvmtiThreadState.hpp"
36 #include "runtime/basicLock.hpp"
37 #include "runtime/biasedLocking.hpp"
38 #include "runtime/sharedRuntime.hpp"
39 #include "runtime/thread.inline.hpp"
42 // Implementation of InterpreterMacroAssembler
44 #ifdef CC_INTERP
45 void InterpreterMacroAssembler::get_method(Register reg) {
46 movptr(reg, Address(rbp, -((int)sizeof(BytecodeInterpreter) + 2 * wordSize)));
47 movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method)));
48 }
49 #endif // CC_INTERP
51 #ifndef CC_INTERP
53 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point,
54 int number_of_arguments) {
55 // interpreter specific
56 //
57 // Note: No need to save/restore bcp & locals (r13 & r14) pointer
58 // since these are callee saved registers and no blocking/
59 // GC can happen in leaf calls.
60 // Further Note: DO NOT save/restore bcp/locals. If a caller has
61 // already saved them so that it can use esi/edi as temporaries
62 // then a save/restore here will DESTROY the copy the caller
63 // saved! There used to be a save_bcp() that only happened in
64 // the ASSERT path (no restore_bcp). Which caused bizarre failures
65 // when jvm built with ASSERTs.
66 #ifdef ASSERT
67 {
68 Label L;
69 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
70 jcc(Assembler::equal, L);
71 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
72 " last_sp != NULL");
73 bind(L);
74 }
75 #endif
76 // super call
77 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
78 // interpreter specific
79 // Used to ASSERT that r13/r14 were equal to frame's bcp/locals
80 // but since they may not have been saved (and we don't want to
81 // save thme here (see note above) the assert is invalid.
82 }
84 void InterpreterMacroAssembler::call_VM_base(Register oop_result,
85 Register java_thread,
86 Register last_java_sp,
87 address entry_point,
88 int number_of_arguments,
89 bool check_exceptions) {
90 // interpreter specific
91 //
92 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
93 // really make a difference for these runtime calls, since they are
94 // slow anyway. Btw., bcp must be saved/restored since it may change
95 // due to GC.
96 // assert(java_thread == noreg , "not expecting a precomputed java thread");
97 save_bcp();
98 #ifdef ASSERT
99 {
100 Label L;
101 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
102 jcc(Assembler::equal, L);
103 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
104 " last_sp != NULL");
105 bind(L);
106 }
107 #endif /* ASSERT */
108 // super call
109 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp,
110 entry_point, number_of_arguments,
111 check_exceptions);
112 // interpreter specific
113 restore_bcp();
114 restore_locals();
115 }
118 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
119 if (JvmtiExport::can_pop_frame()) {
120 Label L;
121 // Initiate popframe handling only if it is not already being
122 // processed. If the flag has the popframe_processing bit set, it
123 // means that this code is called *during* popframe handling - we
124 // don't want to reenter.
125 // This method is only called just after the call into the vm in
126 // call_VM_base, so the arg registers are available.
127 movl(c_rarg0, Address(r15_thread, JavaThread::popframe_condition_offset()));
128 testl(c_rarg0, JavaThread::popframe_pending_bit);
129 jcc(Assembler::zero, L);
130 testl(c_rarg0, JavaThread::popframe_processing_bit);
131 jcc(Assembler::notZero, L);
132 // Call Interpreter::remove_activation_preserving_args_entry() to get the
133 // address of the same-named entrypoint in the generated interpreter code.
134 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
135 jmp(rax);
136 bind(L);
137 }
138 }
141 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
142 movptr(rcx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
143 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset());
144 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset());
145 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset());
146 switch (state) {
147 case atos: movptr(rax, oop_addr);
148 movptr(oop_addr, (int32_t)NULL_WORD);
149 verify_oop(rax, state); break;
150 case ltos: movptr(rax, val_addr); break;
151 case btos: // fall through
152 case ztos: // fall through
153 case ctos: // fall through
154 case stos: // fall through
155 case itos: movl(rax, val_addr); break;
156 case ftos: movflt(xmm0, val_addr); break;
157 case dtos: movdbl(xmm0, val_addr); break;
158 case vtos: /* nothing to do */ break;
159 default : ShouldNotReachHere();
160 }
161 // Clean up tos value in the thread object
162 movl(tos_addr, (int) ilgl);
163 movl(val_addr, (int32_t) NULL_WORD);
164 }
167 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
168 if (JvmtiExport::can_force_early_return()) {
169 Label L;
170 movptr(c_rarg0, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
171 testptr(c_rarg0, c_rarg0);
172 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit;
174 // Initiate earlyret handling only if it is not already being processed.
175 // If the flag has the earlyret_processing bit set, it means that this code
176 // is called *during* earlyret handling - we don't want to reenter.
177 movl(c_rarg0, Address(c_rarg0, JvmtiThreadState::earlyret_state_offset()));
178 cmpl(c_rarg0, JvmtiThreadState::earlyret_pending);
179 jcc(Assembler::notEqual, L);
181 // Call Interpreter::remove_activation_early_entry() to get the address of the
182 // same-named entrypoint in the generated interpreter code.
183 movptr(c_rarg0, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
184 movl(c_rarg0, Address(c_rarg0, JvmtiThreadState::earlyret_tos_offset()));
185 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), c_rarg0);
186 jmp(rax);
187 bind(L);
188 }
189 }
192 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(
193 Register reg,
194 int bcp_offset) {
195 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
196 load_unsigned_short(reg, Address(r13, bcp_offset));
197 bswapl(reg);
198 shrl(reg, 16);
199 }
202 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index,
203 int bcp_offset,
204 size_t index_size) {
205 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
206 if (index_size == sizeof(u2)) {
207 load_unsigned_short(index, Address(r13, bcp_offset));
208 } else if (index_size == sizeof(u4)) {
209 assert(EnableInvokeDynamic, "giant index used only for JSR 292");
210 movl(index, Address(r13, bcp_offset));
211 // Check if the secondary index definition is still ~x, otherwise
212 // we have to change the following assembler code to calculate the
213 // plain index.
214 assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line");
215 notl(index); // convert to plain index
216 } else if (index_size == sizeof(u1)) {
217 load_unsigned_byte(index, Address(r13, bcp_offset));
218 } else {
219 ShouldNotReachHere();
220 }
221 }
224 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache,
225 Register index,
226 int bcp_offset,
227 size_t index_size) {
228 assert_different_registers(cache, index);
229 get_cache_index_at_bcp(index, bcp_offset, index_size);
230 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
231 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
232 // convert from field index to ConstantPoolCacheEntry index
233 assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line");
234 shll(index, 2);
235 }
238 void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache,
239 Register index,
240 Register bytecode,
241 int byte_no,
242 int bcp_offset,
243 size_t index_size) {
244 get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size);
245 // We use a 32-bit load here since the layout of 64-bit words on
246 // little-endian machines allow us that.
247 movl(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset()));
248 const int shift_count = (1 + byte_no) * BitsPerByte;
249 assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) ||
250 (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift),
251 "correct shift count");
252 shrl(bytecode, shift_count);
253 assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask");
254 andl(bytecode, ConstantPoolCacheEntry::bytecode_1_mask);
255 }
258 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache,
259 Register tmp,
260 int bcp_offset,
261 size_t index_size) {
262 assert(cache != tmp, "must use different register");
263 get_cache_index_at_bcp(tmp, bcp_offset, index_size);
264 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
265 // convert from field index to ConstantPoolCacheEntry index
266 // and from word offset to byte offset
267 assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line");
268 shll(tmp, 2 + LogBytesPerWord);
269 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
270 // skip past the header
271 addptr(cache, in_bytes(ConstantPoolCache::base_offset()));
272 addptr(cache, tmp); // construct pointer to cache entry
273 }
275 void InterpreterMacroAssembler::get_method_counters(Register method,
276 Register mcs, Label& skip) {
277 Label has_counters;
278 movptr(mcs, Address(method, Method::method_counters_offset()));
279 testptr(mcs, mcs);
280 jcc(Assembler::notZero, has_counters);
281 call_VM(noreg, CAST_FROM_FN_PTR(address,
282 InterpreterRuntime::build_method_counters), method);
283 movptr(mcs, Address(method,Method::method_counters_offset()));
284 testptr(mcs, mcs);
285 jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory
286 bind(has_counters);
287 }
289 // Load object from cpool->resolved_references(index)
290 void InterpreterMacroAssembler::load_resolved_reference_at_index(
291 Register result, Register index) {
292 assert_different_registers(result, index);
293 // convert from field index to resolved_references() index and from
294 // word index to byte offset. Since this is a java object, it can be compressed
295 Register tmp = index; // reuse
296 shll(tmp, LogBytesPerHeapOop);
298 get_constant_pool(result);
299 // load pointer for resolved_references[] objArray
300 movptr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes()));
301 // JNIHandles::resolve(obj);
302 movptr(result, Address(result, 0));
303 // Add in the index
304 addptr(result, tmp);
305 load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT)));
306 }
308 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a
309 // subtype of super_klass.
310 //
311 // Args:
312 // rax: superklass
313 // Rsub_klass: subklass
314 //
315 // Kills:
316 // rcx, rdi
317 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
318 Label& ok_is_subtype) {
319 assert(Rsub_klass != rax, "rax holds superklass");
320 assert(Rsub_klass != r14, "r14 holds locals");
321 assert(Rsub_klass != r13, "r13 holds bcp");
322 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length");
323 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr");
325 // Profile the not-null value's klass.
326 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi
328 // Do the check.
329 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx
331 // Profile the failure of the check.
332 profile_typecheck_failed(rcx); // blows rcx
333 }
337 // Java Expression Stack
339 void InterpreterMacroAssembler::pop_ptr(Register r) {
340 pop(r);
341 }
343 void InterpreterMacroAssembler::pop_i(Register r) {
344 // XXX can't use pop currently, upper half non clean
345 movl(r, Address(rsp, 0));
346 addptr(rsp, wordSize);
347 }
349 void InterpreterMacroAssembler::pop_l(Register r) {
350 movq(r, Address(rsp, 0));
351 addptr(rsp, 2 * Interpreter::stackElementSize);
352 }
354 void InterpreterMacroAssembler::pop_f(XMMRegister r) {
355 movflt(r, Address(rsp, 0));
356 addptr(rsp, wordSize);
357 }
359 void InterpreterMacroAssembler::pop_d(XMMRegister r) {
360 movdbl(r, Address(rsp, 0));
361 addptr(rsp, 2 * Interpreter::stackElementSize);
362 }
364 void InterpreterMacroAssembler::push_ptr(Register r) {
365 push(r);
366 }
368 void InterpreterMacroAssembler::push_i(Register r) {
369 push(r);
370 }
372 void InterpreterMacroAssembler::push_l(Register r) {
373 subptr(rsp, 2 * wordSize);
374 movq(Address(rsp, 0), r);
375 }
377 void InterpreterMacroAssembler::push_f(XMMRegister r) {
378 subptr(rsp, wordSize);
379 movflt(Address(rsp, 0), r);
380 }
382 void InterpreterMacroAssembler::push_d(XMMRegister r) {
383 subptr(rsp, 2 * wordSize);
384 movdbl(Address(rsp, 0), r);
385 }
387 void InterpreterMacroAssembler::pop(TosState state) {
388 switch (state) {
389 case atos: pop_ptr(); break;
390 case btos:
391 case ztos:
392 case ctos:
393 case stos:
394 case itos: pop_i(); break;
395 case ltos: pop_l(); break;
396 case ftos: pop_f(); break;
397 case dtos: pop_d(); break;
398 case vtos: /* nothing to do */ break;
399 default: ShouldNotReachHere();
400 }
401 verify_oop(rax, state);
402 }
404 void InterpreterMacroAssembler::push(TosState state) {
405 verify_oop(rax, state);
406 switch (state) {
407 case atos: push_ptr(); break;
408 case btos:
409 case ztos:
410 case ctos:
411 case stos:
412 case itos: push_i(); break;
413 case ltos: push_l(); break;
414 case ftos: push_f(); break;
415 case dtos: push_d(); break;
416 case vtos: /* nothing to do */ break;
417 default : ShouldNotReachHere();
418 }
419 }
422 // Helpers for swap and dup
423 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
424 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
425 }
427 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
428 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
429 }
432 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
433 // set sender sp
434 lea(r13, Address(rsp, wordSize));
435 // record last_sp
436 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), r13);
437 }
440 // Jump to from_interpreted entry of a call unless single stepping is possible
441 // in this thread in which case we must call the i2i entry
442 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
443 prepare_to_jump_from_interpreted();
445 if (JvmtiExport::can_post_interpreter_events()) {
446 Label run_compiled_code;
447 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
448 // compiled code in threads for which the event is enabled. Check here for
449 // interp_only_mode if these events CAN be enabled.
450 // interp_only is an int, on little endian it is sufficient to test the byte only
451 // Is a cmpl faster?
452 cmpb(Address(r15_thread, JavaThread::interp_only_mode_offset()), 0);
453 jccb(Assembler::zero, run_compiled_code);
454 jmp(Address(method, Method::interpreter_entry_offset()));
455 bind(run_compiled_code);
456 }
458 jmp(Address(method, Method::from_interpreted_offset()));
460 }
463 // The following two routines provide a hook so that an implementation
464 // can schedule the dispatch in two parts. amd64 does not do this.
465 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
466 // Nothing amd64 specific to be done here
467 }
469 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
470 dispatch_next(state, step);
471 }
473 void InterpreterMacroAssembler::dispatch_base(TosState state,
474 address* table,
475 bool verifyoop) {
476 verify_FPU(1, state);
477 if (VerifyActivationFrameSize) {
478 Label L;
479 mov(rcx, rbp);
480 subptr(rcx, rsp);
481 int32_t min_frame_size =
482 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) *
483 wordSize;
484 cmpptr(rcx, (int32_t)min_frame_size);
485 jcc(Assembler::greaterEqual, L);
486 stop("broken stack frame");
487 bind(L);
488 }
489 if (verifyoop) {
490 verify_oop(rax, state);
491 }
492 lea(rscratch1, ExternalAddress((address)table));
493 jmp(Address(rscratch1, rbx, Address::times_8));
494 }
496 void InterpreterMacroAssembler::dispatch_only(TosState state) {
497 dispatch_base(state, Interpreter::dispatch_table(state));
498 }
500 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
501 dispatch_base(state, Interpreter::normal_table(state));
502 }
504 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
505 dispatch_base(state, Interpreter::normal_table(state), false);
506 }
509 void InterpreterMacroAssembler::dispatch_next(TosState state, int step) {
510 // load next bytecode (load before advancing r13 to prevent AGI)
511 load_unsigned_byte(rbx, Address(r13, step));
512 // advance r13
513 increment(r13, step);
514 dispatch_base(state, Interpreter::dispatch_table(state));
515 }
517 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
518 // load current bytecode
519 load_unsigned_byte(rbx, Address(r13, 0));
520 dispatch_base(state, table);
521 }
523 // remove activation
524 //
525 // Unlock the receiver if this is a synchronized method.
526 // Unlock any Java monitors from syncronized blocks.
527 // Remove the activation from the stack.
528 //
529 // If there are locked Java monitors
530 // If throw_monitor_exception
531 // throws IllegalMonitorStateException
532 // Else if install_monitor_exception
533 // installs IllegalMonitorStateException
534 // Else
535 // no error processing
536 void InterpreterMacroAssembler::remove_activation(
537 TosState state,
538 Register ret_addr,
539 bool throw_monitor_exception,
540 bool install_monitor_exception,
541 bool notify_jvmdi) {
542 // Note: Registers rdx xmm0 may be in use for the
543 // result check if synchronized method
544 Label unlocked, unlock, no_unlock;
546 // get the value of _do_not_unlock_if_synchronized into rdx
547 const Address do_not_unlock_if_synchronized(r15_thread,
548 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
549 movbool(rdx, do_not_unlock_if_synchronized);
550 movbool(do_not_unlock_if_synchronized, false); // reset the flag
552 // get method access flags
553 movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize));
554 movl(rcx, Address(rbx, Method::access_flags_offset()));
555 testl(rcx, JVM_ACC_SYNCHRONIZED);
556 jcc(Assembler::zero, unlocked);
558 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
559 // is set.
560 testbool(rdx);
561 jcc(Assembler::notZero, no_unlock);
563 // unlock monitor
564 push(state); // save result
566 // BasicObjectLock will be first in list, since this is a
567 // synchronized method. However, need to check that the object has
568 // not been unlocked by an explicit monitorexit bytecode.
569 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset *
570 wordSize - (int) sizeof(BasicObjectLock));
571 // We use c_rarg1 so that if we go slow path it will be the correct
572 // register for unlock_object to pass to VM directly
573 lea(c_rarg1, monitor); // address of first monitor
575 movptr(rax, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
576 testptr(rax, rax);
577 jcc(Assembler::notZero, unlock);
579 pop(state);
580 if (throw_monitor_exception) {
581 // Entry already unlocked, need to throw exception
582 call_VM(noreg, CAST_FROM_FN_PTR(address,
583 InterpreterRuntime::throw_illegal_monitor_state_exception));
584 should_not_reach_here();
585 } else {
586 // Monitor already unlocked during a stack unroll. If requested,
587 // install an illegal_monitor_state_exception. Continue with
588 // stack unrolling.
589 if (install_monitor_exception) {
590 call_VM(noreg, CAST_FROM_FN_PTR(address,
591 InterpreterRuntime::new_illegal_monitor_state_exception));
592 }
593 jmp(unlocked);
594 }
596 bind(unlock);
597 unlock_object(c_rarg1);
598 pop(state);
600 // Check that for block-structured locking (i.e., that all locked
601 // objects has been unlocked)
602 bind(unlocked);
604 // rax: Might contain return value
606 // Check that all monitors are unlocked
607 {
608 Label loop, exception, entry, restart;
609 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
610 const Address monitor_block_top(
611 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
612 const Address monitor_block_bot(
613 rbp, frame::interpreter_frame_initial_sp_offset * wordSize);
615 bind(restart);
616 // We use c_rarg1 so that if we go slow path it will be the correct
617 // register for unlock_object to pass to VM directly
618 movptr(c_rarg1, monitor_block_top); // points to current entry, starting
619 // with top-most entry
620 lea(rbx, monitor_block_bot); // points to word before bottom of
621 // monitor block
622 jmp(entry);
624 // Entry already locked, need to throw exception
625 bind(exception);
627 if (throw_monitor_exception) {
628 // Throw exception
629 MacroAssembler::call_VM(noreg,
630 CAST_FROM_FN_PTR(address, InterpreterRuntime::
631 throw_illegal_monitor_state_exception));
632 should_not_reach_here();
633 } else {
634 // Stack unrolling. Unlock object and install illegal_monitor_exception.
635 // Unlock does not block, so don't have to worry about the frame.
636 // We don't have to preserve c_rarg1 since we are going to throw an exception.
638 push(state);
639 unlock_object(c_rarg1);
640 pop(state);
642 if (install_monitor_exception) {
643 call_VM(noreg, CAST_FROM_FN_PTR(address,
644 InterpreterRuntime::
645 new_illegal_monitor_state_exception));
646 }
648 jmp(restart);
649 }
651 bind(loop);
652 // check if current entry is used
653 cmpptr(Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL);
654 jcc(Assembler::notEqual, exception);
656 addptr(c_rarg1, entry_size); // otherwise advance to next entry
657 bind(entry);
658 cmpptr(c_rarg1, rbx); // check if bottom reached
659 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry
660 }
662 bind(no_unlock);
664 // jvmti support
665 if (notify_jvmdi) {
666 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
667 } else {
668 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
669 }
671 // remove activation
672 // get sender sp
673 movptr(rbx,
674 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize));
675 leave(); // remove frame anchor
676 pop(ret_addr); // get return address
677 mov(rsp, rbx); // set sp to sender sp
678 }
680 #endif // C_INTERP
682 // Lock object
683 //
684 // Args:
685 // c_rarg1: BasicObjectLock to be used for locking
686 //
687 // Kills:
688 // rax
689 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, .. (param regs)
690 // rscratch1, rscratch2 (scratch regs)
691 void InterpreterMacroAssembler::lock_object(Register lock_reg) {
692 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
694 if (UseHeavyMonitors) {
695 call_VM(noreg,
696 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
697 lock_reg);
698 } else {
699 Label done;
701 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
702 const Register obj_reg = c_rarg3; // Will contain the oop
704 const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
705 const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
706 const int mark_offset = lock_offset +
707 BasicLock::displaced_header_offset_in_bytes();
709 Label slow_case;
711 // Load object pointer into obj_reg %c_rarg3
712 movptr(obj_reg, Address(lock_reg, obj_offset));
714 if (UseBiasedLocking) {
715 biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, done, &slow_case);
716 }
718 // Load immediate 1 into swap_reg %rax
719 movl(swap_reg, 1);
721 // Load (object->mark() | 1) into swap_reg %rax
722 orptr(swap_reg, Address(obj_reg, 0));
724 // Save (object->mark() | 1) into BasicLock's displaced header
725 movptr(Address(lock_reg, mark_offset), swap_reg);
727 assert(lock_offset == 0,
728 "displached header must be first word in BasicObjectLock");
730 if (os::is_MP()) lock();
731 cmpxchgptr(lock_reg, Address(obj_reg, 0));
732 if (PrintBiasedLockingStatistics) {
733 cond_inc32(Assembler::zero,
734 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
735 }
736 jcc(Assembler::zero, done);
738 // Test if the oopMark is an obvious stack pointer, i.e.,
739 // 1) (mark & 7) == 0, and
740 // 2) rsp <= mark < mark + os::pagesize()
741 //
742 // These 3 tests can be done by evaluating the following
743 // expression: ((mark - rsp) & (7 - os::vm_page_size())),
744 // assuming both stack pointer and pagesize have their
745 // least significant 3 bits clear.
746 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg
747 subptr(swap_reg, rsp);
748 andptr(swap_reg, 7 - os::vm_page_size());
750 // Save the test result, for recursive case, the result is zero
751 movptr(Address(lock_reg, mark_offset), swap_reg);
753 if (PrintBiasedLockingStatistics) {
754 cond_inc32(Assembler::zero,
755 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
756 }
757 jcc(Assembler::zero, done);
759 bind(slow_case);
761 // Call the runtime routine for slow case
762 call_VM(noreg,
763 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
764 lock_reg);
766 bind(done);
767 }
768 }
771 // Unlocks an object. Used in monitorexit bytecode and
772 // remove_activation. Throws an IllegalMonitorException if object is
773 // not locked by current thread.
774 //
775 // Args:
776 // c_rarg1: BasicObjectLock for lock
777 //
778 // Kills:
779 // rax
780 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs)
781 // rscratch1, rscratch2 (scratch regs)
782 void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
783 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1");
785 if (UseHeavyMonitors) {
786 call_VM(noreg,
787 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
788 lock_reg);
789 } else {
790 Label done;
792 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
793 const Register header_reg = c_rarg2; // Will contain the old oopMark
794 const Register obj_reg = c_rarg3; // Will contain the oop
796 save_bcp(); // Save in case of exception
798 // Convert from BasicObjectLock structure to object and BasicLock
799 // structure Store the BasicLock address into %rax
800 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
802 // Load oop into obj_reg(%c_rarg3)
803 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
805 // Free entry
806 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD);
808 if (UseBiasedLocking) {
809 biased_locking_exit(obj_reg, header_reg, done);
810 }
812 // Load the old header from BasicLock structure
813 movptr(header_reg, Address(swap_reg,
814 BasicLock::displaced_header_offset_in_bytes()));
816 // Test for recursion
817 testptr(header_reg, header_reg);
819 // zero for recursive case
820 jcc(Assembler::zero, done);
822 // Atomic swap back the old header
823 if (os::is_MP()) lock();
824 cmpxchgptr(header_reg, Address(obj_reg, 0));
826 // zero for recursive case
827 jcc(Assembler::zero, done);
829 // Call the runtime routine for slow case.
830 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()),
831 obj_reg); // restore obj
832 call_VM(noreg,
833 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
834 lock_reg);
836 bind(done);
838 restore_bcp();
839 }
840 }
842 #ifndef CC_INTERP
844 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp,
845 Label& zero_continue) {
846 assert(ProfileInterpreter, "must be profiling interpreter");
847 movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize));
848 testptr(mdp, mdp);
849 jcc(Assembler::zero, zero_continue);
850 }
853 // Set the method data pointer for the current bcp.
854 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
855 assert(ProfileInterpreter, "must be profiling interpreter");
856 Label set_mdp;
857 push(rax);
858 push(rbx);
860 get_method(rbx);
861 // Test MDO to avoid the call if it is NULL.
862 movptr(rax, Address(rbx, in_bytes(Method::method_data_offset())));
863 testptr(rax, rax);
864 jcc(Assembler::zero, set_mdp);
865 // rbx: method
866 // r13: bcp
867 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, r13);
868 // rax: mdi
869 // mdo is guaranteed to be non-zero here, we checked for it before the call.
870 movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset())));
871 addptr(rbx, in_bytes(MethodData::data_offset()));
872 addptr(rax, rbx);
873 bind(set_mdp);
874 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
875 pop(rbx);
876 pop(rax);
877 }
879 void InterpreterMacroAssembler::verify_method_data_pointer() {
880 assert(ProfileInterpreter, "must be profiling interpreter");
881 #ifdef ASSERT
882 Label verify_continue;
883 push(rax);
884 push(rbx);
885 push(c_rarg3);
886 push(c_rarg2);
887 test_method_data_pointer(c_rarg3, verify_continue); // If mdp is zero, continue
888 get_method(rbx);
890 // If the mdp is valid, it will point to a DataLayout header which is
891 // consistent with the bcp. The converse is highly probable also.
892 load_unsigned_short(c_rarg2,
893 Address(c_rarg3, in_bytes(DataLayout::bci_offset())));
894 addptr(c_rarg2, Address(rbx, Method::const_offset()));
895 lea(c_rarg2, Address(c_rarg2, ConstMethod::codes_offset()));
896 cmpptr(c_rarg2, r13);
897 jcc(Assembler::equal, verify_continue);
898 // rbx: method
899 // r13: bcp
900 // c_rarg3: mdp
901 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp),
902 rbx, r13, c_rarg3);
903 bind(verify_continue);
904 pop(c_rarg2);
905 pop(c_rarg3);
906 pop(rbx);
907 pop(rax);
908 #endif // ASSERT
909 }
912 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in,
913 int constant,
914 Register value) {
915 assert(ProfileInterpreter, "must be profiling interpreter");
916 Address data(mdp_in, constant);
917 movptr(data, value);
918 }
921 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
922 int constant,
923 bool decrement) {
924 // Counter address
925 Address data(mdp_in, constant);
927 increment_mdp_data_at(data, decrement);
928 }
930 void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
931 bool decrement) {
932 assert(ProfileInterpreter, "must be profiling interpreter");
933 // %%% this does 64bit counters at best it is wasting space
934 // at worst it is a rare bug when counters overflow
936 if (decrement) {
937 // Decrement the register. Set condition codes.
938 addptr(data, (int32_t) -DataLayout::counter_increment);
939 // If the decrement causes the counter to overflow, stay negative
940 Label L;
941 jcc(Assembler::negative, L);
942 addptr(data, (int32_t) DataLayout::counter_increment);
943 bind(L);
944 } else {
945 assert(DataLayout::counter_increment == 1,
946 "flow-free idiom only works with 1");
947 // Increment the register. Set carry flag.
948 addptr(data, DataLayout::counter_increment);
949 // If the increment causes the counter to overflow, pull back by 1.
950 sbbptr(data, (int32_t)0);
951 }
952 }
955 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
956 Register reg,
957 int constant,
958 bool decrement) {
959 Address data(mdp_in, reg, Address::times_1, constant);
961 increment_mdp_data_at(data, decrement);
962 }
964 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in,
965 int flag_byte_constant) {
966 assert(ProfileInterpreter, "must be profiling interpreter");
967 int header_offset = in_bytes(DataLayout::header_offset());
968 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant);
969 // Set the flag
970 orl(Address(mdp_in, header_offset), header_bits);
971 }
975 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
976 int offset,
977 Register value,
978 Register test_value_out,
979 Label& not_equal_continue) {
980 assert(ProfileInterpreter, "must be profiling interpreter");
981 if (test_value_out == noreg) {
982 cmpptr(value, Address(mdp_in, offset));
983 } else {
984 // Put the test value into a register, so caller can use it:
985 movptr(test_value_out, Address(mdp_in, offset));
986 cmpptr(test_value_out, value);
987 }
988 jcc(Assembler::notEqual, not_equal_continue);
989 }
992 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
993 int offset_of_disp) {
994 assert(ProfileInterpreter, "must be profiling interpreter");
995 Address disp_address(mdp_in, offset_of_disp);
996 addptr(mdp_in, disp_address);
997 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
998 }
1001 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1002 Register reg,
1003 int offset_of_disp) {
1004 assert(ProfileInterpreter, "must be profiling interpreter");
1005 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
1006 addptr(mdp_in, disp_address);
1007 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
1008 }
1011 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in,
1012 int constant) {
1013 assert(ProfileInterpreter, "must be profiling interpreter");
1014 addptr(mdp_in, constant);
1015 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
1016 }
1019 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
1020 assert(ProfileInterpreter, "must be profiling interpreter");
1021 push(return_bci); // save/restore across call_VM
1022 call_VM(noreg,
1023 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret),
1024 return_bci);
1025 pop(return_bci);
1026 }
1029 void InterpreterMacroAssembler::profile_taken_branch(Register mdp,
1030 Register bumped_count) {
1031 if (ProfileInterpreter) {
1032 Label profile_continue;
1034 // If no method data exists, go to profile_continue.
1035 // Otherwise, assign to mdp
1036 test_method_data_pointer(mdp, profile_continue);
1038 // We are taking a branch. Increment the taken count.
1039 // We inline increment_mdp_data_at to return bumped_count in a register
1040 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1041 Address data(mdp, in_bytes(JumpData::taken_offset()));
1042 movptr(bumped_count, data);
1043 assert(DataLayout::counter_increment == 1,
1044 "flow-free idiom only works with 1");
1045 addptr(bumped_count, DataLayout::counter_increment);
1046 sbbptr(bumped_count, 0);
1047 movptr(data, bumped_count); // Store back out
1049 // The method data pointer needs to be updated to reflect the new target.
1050 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1051 bind(profile_continue);
1052 }
1053 }
1056 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1057 if (ProfileInterpreter) {
1058 Label profile_continue;
1060 // If no method data exists, go to profile_continue.
1061 test_method_data_pointer(mdp, profile_continue);
1063 // We are taking a branch. Increment the not taken count.
1064 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1066 // The method data pointer needs to be updated to correspond to
1067 // the next bytecode
1068 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1069 bind(profile_continue);
1070 }
1071 }
1073 void InterpreterMacroAssembler::profile_call(Register mdp) {
1074 if (ProfileInterpreter) {
1075 Label profile_continue;
1077 // If no method data exists, go to profile_continue.
1078 test_method_data_pointer(mdp, profile_continue);
1080 // We are making a call. Increment the count.
1081 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1083 // The method data pointer needs to be updated to reflect the new target.
1084 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1085 bind(profile_continue);
1086 }
1087 }
1090 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1091 if (ProfileInterpreter) {
1092 Label profile_continue;
1094 // If no method data exists, go to profile_continue.
1095 test_method_data_pointer(mdp, profile_continue);
1097 // We are making a call. Increment the count.
1098 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1100 // The method data pointer needs to be updated to reflect the new target.
1101 update_mdp_by_constant(mdp,
1102 in_bytes(VirtualCallData::
1103 virtual_call_data_size()));
1104 bind(profile_continue);
1105 }
1106 }
1109 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1110 Register mdp,
1111 Register reg2,
1112 bool receiver_can_be_null) {
1113 if (ProfileInterpreter) {
1114 Label profile_continue;
1116 // If no method data exists, go to profile_continue.
1117 test_method_data_pointer(mdp, profile_continue);
1119 Label skip_receiver_profile;
1120 if (receiver_can_be_null) {
1121 Label not_null;
1122 testptr(receiver, receiver);
1123 jccb(Assembler::notZero, not_null);
1124 // We are making a call. Increment the count for null receiver.
1125 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1126 jmp(skip_receiver_profile);
1127 bind(not_null);
1128 }
1130 // Record the receiver type.
1131 record_klass_in_profile(receiver, mdp, reg2, true);
1132 bind(skip_receiver_profile);
1134 // The method data pointer needs to be updated to reflect the new target.
1135 update_mdp_by_constant(mdp,
1136 in_bytes(VirtualCallData::
1137 virtual_call_data_size()));
1138 bind(profile_continue);
1139 }
1140 }
1142 // This routine creates a state machine for updating the multi-row
1143 // type profile at a virtual call site (or other type-sensitive bytecode).
1144 // The machine visits each row (of receiver/count) until the receiver type
1145 // is found, or until it runs out of rows. At the same time, it remembers
1146 // the location of the first empty row. (An empty row records null for its
1147 // receiver, and can be allocated for a newly-observed receiver type.)
1148 // Because there are two degrees of freedom in the state, a simple linear
1149 // search will not work; it must be a decision tree. Hence this helper
1150 // function is recursive, to generate the required tree structured code.
1151 // It's the interpreter, so we are trading off code space for speed.
1152 // See below for example code.
1153 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1154 Register receiver, Register mdp,
1155 Register reg2, int start_row,
1156 Label& done, bool is_virtual_call) {
1157 if (TypeProfileWidth == 0) {
1158 if (is_virtual_call) {
1159 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1160 }
1161 return;
1162 }
1164 int last_row = VirtualCallData::row_limit() - 1;
1165 assert(start_row <= last_row, "must be work left to do");
1166 // Test this row for both the receiver and for null.
1167 // Take any of three different outcomes:
1168 // 1. found receiver => increment count and goto done
1169 // 2. found null => keep looking for case 1, maybe allocate this cell
1170 // 3. found something else => keep looking for cases 1 and 2
1171 // Case 3 is handled by a recursive call.
1172 for (int row = start_row; row <= last_row; row++) {
1173 Label next_test;
1174 bool test_for_null_also = (row == start_row);
1176 // See if the receiver is receiver[n].
1177 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
1178 test_mdp_data_at(mdp, recvr_offset, receiver,
1179 (test_for_null_also ? reg2 : noreg),
1180 next_test);
1181 // (Reg2 now contains the receiver from the CallData.)
1183 // The receiver is receiver[n]. Increment count[n].
1184 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
1185 increment_mdp_data_at(mdp, count_offset);
1186 jmp(done);
1187 bind(next_test);
1189 if (test_for_null_also) {
1190 Label found_null;
1191 // Failed the equality check on receiver[n]... Test for null.
1192 testptr(reg2, reg2);
1193 if (start_row == last_row) {
1194 // The only thing left to do is handle the null case.
1195 if (is_virtual_call) {
1196 jccb(Assembler::zero, found_null);
1197 // Receiver did not match any saved receiver and there is no empty row for it.
1198 // Increment total counter to indicate polymorphic case.
1199 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1200 jmp(done);
1201 bind(found_null);
1202 } else {
1203 jcc(Assembler::notZero, done);
1204 }
1205 break;
1206 }
1207 // Since null is rare, make it be the branch-taken case.
1208 jcc(Assembler::zero, found_null);
1210 // Put all the "Case 3" tests here.
1211 record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call);
1213 // Found a null. Keep searching for a matching receiver,
1214 // but remember that this is an empty (unused) slot.
1215 bind(found_null);
1216 }
1217 }
1219 // In the fall-through case, we found no matching receiver, but we
1220 // observed the receiver[start_row] is NULL.
1222 // Fill in the receiver field and increment the count.
1223 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
1224 set_mdp_data_at(mdp, recvr_offset, receiver);
1225 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
1226 movl(reg2, DataLayout::counter_increment);
1227 set_mdp_data_at(mdp, count_offset, reg2);
1228 if (start_row > 0) {
1229 jmp(done);
1230 }
1231 }
1233 // Example state machine code for three profile rows:
1234 // // main copy of decision tree, rooted at row[1]
1235 // if (row[0].rec == rec) { row[0].incr(); goto done; }
1236 // if (row[0].rec != NULL) {
1237 // // inner copy of decision tree, rooted at row[1]
1238 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1239 // if (row[1].rec != NULL) {
1240 // // degenerate decision tree, rooted at row[2]
1241 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1242 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow
1243 // row[2].init(rec); goto done;
1244 // } else {
1245 // // remember row[1] is empty
1246 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1247 // row[1].init(rec); goto done;
1248 // }
1249 // } else {
1250 // // remember row[0] is empty
1251 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1252 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1253 // row[0].init(rec); goto done;
1254 // }
1255 // done:
1257 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1258 Register mdp, Register reg2,
1259 bool is_virtual_call) {
1260 assert(ProfileInterpreter, "must be profiling");
1261 Label done;
1263 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1265 bind (done);
1266 }
1268 void InterpreterMacroAssembler::profile_ret(Register return_bci,
1269 Register mdp) {
1270 if (ProfileInterpreter) {
1271 Label profile_continue;
1272 uint row;
1274 // If no method data exists, go to profile_continue.
1275 test_method_data_pointer(mdp, profile_continue);
1277 // Update the total ret count.
1278 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1280 for (row = 0; row < RetData::row_limit(); row++) {
1281 Label next_test;
1283 // See if return_bci is equal to bci[n]:
1284 test_mdp_data_at(mdp,
1285 in_bytes(RetData::bci_offset(row)),
1286 return_bci, noreg,
1287 next_test);
1289 // return_bci is equal to bci[n]. Increment the count.
1290 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1292 // The method data pointer needs to be updated to reflect the new target.
1293 update_mdp_by_offset(mdp,
1294 in_bytes(RetData::bci_displacement_offset(row)));
1295 jmp(profile_continue);
1296 bind(next_test);
1297 }
1299 update_mdp_for_ret(return_bci);
1301 bind(profile_continue);
1302 }
1303 }
1306 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1307 if (ProfileInterpreter) {
1308 Label profile_continue;
1310 // If no method data exists, go to profile_continue.
1311 test_method_data_pointer(mdp, profile_continue);
1313 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1315 // The method data pointer needs to be updated.
1316 int mdp_delta = in_bytes(BitData::bit_data_size());
1317 if (TypeProfileCasts) {
1318 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1319 }
1320 update_mdp_by_constant(mdp, mdp_delta);
1322 bind(profile_continue);
1323 }
1324 }
1327 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
1328 if (ProfileInterpreter && TypeProfileCasts) {
1329 Label profile_continue;
1331 // If no method data exists, go to profile_continue.
1332 test_method_data_pointer(mdp, profile_continue);
1334 int count_offset = in_bytes(CounterData::count_offset());
1335 // Back up the address, since we have already bumped the mdp.
1336 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1338 // *Decrement* the counter. We expect to see zero or small negatives.
1339 increment_mdp_data_at(mdp, count_offset, true);
1341 bind (profile_continue);
1342 }
1343 }
1346 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) {
1347 if (ProfileInterpreter) {
1348 Label profile_continue;
1350 // If no method data exists, go to profile_continue.
1351 test_method_data_pointer(mdp, profile_continue);
1353 // The method data pointer needs to be updated.
1354 int mdp_delta = in_bytes(BitData::bit_data_size());
1355 if (TypeProfileCasts) {
1356 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1358 // Record the object type.
1359 record_klass_in_profile(klass, mdp, reg2, false);
1360 }
1361 update_mdp_by_constant(mdp, mdp_delta);
1363 bind(profile_continue);
1364 }
1365 }
1368 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1369 if (ProfileInterpreter) {
1370 Label profile_continue;
1372 // If no method data exists, go to profile_continue.
1373 test_method_data_pointer(mdp, profile_continue);
1375 // Update the default case count
1376 increment_mdp_data_at(mdp,
1377 in_bytes(MultiBranchData::default_count_offset()));
1379 // The method data pointer needs to be updated.
1380 update_mdp_by_offset(mdp,
1381 in_bytes(MultiBranchData::
1382 default_displacement_offset()));
1384 bind(profile_continue);
1385 }
1386 }
1389 void InterpreterMacroAssembler::profile_switch_case(Register index,
1390 Register mdp,
1391 Register reg2) {
1392 if (ProfileInterpreter) {
1393 Label profile_continue;
1395 // If no method data exists, go to profile_continue.
1396 test_method_data_pointer(mdp, profile_continue);
1398 // Build the base (index * per_case_size_in_bytes()) +
1399 // case_array_offset_in_bytes()
1400 movl(reg2, in_bytes(MultiBranchData::per_case_size()));
1401 imulptr(index, reg2); // XXX l ?
1402 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ?
1404 // Update the case count
1405 increment_mdp_data_at(mdp,
1406 index,
1407 in_bytes(MultiBranchData::relative_count_offset()));
1409 // The method data pointer needs to be updated.
1410 update_mdp_by_offset(mdp,
1411 index,
1412 in_bytes(MultiBranchData::
1413 relative_displacement_offset()));
1415 bind(profile_continue);
1416 }
1417 }
1421 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
1422 if (state == atos) {
1423 MacroAssembler::verify_oop(reg);
1424 }
1425 }
1427 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
1428 }
1429 #endif // !CC_INTERP
1432 void InterpreterMacroAssembler::notify_method_entry() {
1433 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1434 // track stack depth. If it is possible to enter interp_only_mode we add
1435 // the code to check if the event should be sent.
1436 if (JvmtiExport::can_post_interpreter_events()) {
1437 Label L;
1438 movl(rdx, Address(r15_thread, JavaThread::interp_only_mode_offset()));
1439 testl(rdx, rdx);
1440 jcc(Assembler::zero, L);
1441 call_VM(noreg, CAST_FROM_FN_PTR(address,
1442 InterpreterRuntime::post_method_entry));
1443 bind(L);
1444 }
1446 {
1447 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1448 get_method(c_rarg1);
1449 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1450 r15_thread, c_rarg1);
1451 }
1453 // RedefineClasses() tracing support for obsolete method entry
1454 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
1455 get_method(c_rarg1);
1456 call_VM_leaf(
1457 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1458 r15_thread, c_rarg1);
1459 }
1460 }
1463 void InterpreterMacroAssembler::notify_method_exit(
1464 TosState state, NotifyMethodExitMode mode) {
1465 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1466 // track stack depth. If it is possible to enter interp_only_mode we add
1467 // the code to check if the event should be sent.
1468 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1469 Label L;
1470 // Note: frame::interpreter_frame_result has a dependency on how the
1471 // method result is saved across the call to post_method_exit. If this
1472 // is changed then the interpreter_frame_result implementation will
1473 // need to be updated too.
1475 // For c++ interpreter the result is always stored at a known location in the frame
1476 // template interpreter will leave it on the top of the stack.
1477 NOT_CC_INTERP(push(state);)
1478 movl(rdx, Address(r15_thread, JavaThread::interp_only_mode_offset()));
1479 testl(rdx, rdx);
1480 jcc(Assembler::zero, L);
1481 call_VM(noreg,
1482 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1483 bind(L);
1484 NOT_CC_INTERP(pop(state));
1485 }
1487 {
1488 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1489 NOT_CC_INTERP(push(state));
1490 get_method(c_rarg1);
1491 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1492 r15_thread, c_rarg1);
1493 NOT_CC_INTERP(pop(state));
1494 }
1495 }
1497 // Jump if ((*counter_addr += increment) & mask) satisfies the condition.
1498 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
1499 int increment, int mask,
1500 Register scratch, bool preloaded,
1501 Condition cond, Label* where) {
1502 if (!preloaded) {
1503 movl(scratch, counter_addr);
1504 }
1505 incrementl(scratch, increment);
1506 movl(counter_addr, scratch);
1507 andl(scratch, mask);
1508 if (where != NULL) {
1509 jcc(cond, *where);
1510 }
1511 }