Fri, 12 Feb 2010 15:27:36 -0800
Merge
1 /*
2 * Copyright 2000-2009 Sun Microsystems, Inc. All Rights Reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 * CA 95054 USA or visit www.sun.com if you need additional information or
21 * have any questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_reg_split.cpp.incl"
28 //------------------------------Split--------------------------------------
29 // Walk the graph in RPO and for each lrg which spills, propagate reaching
30 // definitions. During propagation, split the live range around regions of
31 // High Register Pressure (HRP). If a Def is in a region of Low Register
32 // Pressure (LRP), it will not get spilled until we encounter a region of
33 // HRP between it and one of its uses. We will spill at the transition
34 // point between LRP and HRP. Uses in the HRP region will use the spilled
35 // Def. The first Use outside the HRP region will generate a SpillCopy to
36 // hoist the live range back up into a register, and all subsequent uses
37 // will use that new Def until another HRP region is encountered. Defs in
38 // HRP regions will get trailing SpillCopies to push the LRG down into the
39 // stack immediately.
40 //
41 // As a side effect, unlink from (hence make dead) coalesced copies.
42 //
44 static const char out_of_nodes[] = "out of nodes during split";
46 //------------------------------get_spillcopy_wide-----------------------------
47 // Get a SpillCopy node with wide-enough masks. Use the 'wide-mask', the
48 // wide ideal-register spill-mask if possible. If the 'wide-mask' does
49 // not cover the input (or output), use the input (or output) mask instead.
50 Node *PhaseChaitin::get_spillcopy_wide( Node *def, Node *use, uint uidx ) {
51 // If ideal reg doesn't exist we've got a bad schedule happening
52 // that is forcing us to spill something that isn't spillable.
53 // Bail rather than abort
54 int ireg = def->ideal_reg();
55 if( ireg == 0 || ireg == Op_RegFlags ) {
56 assert(false, "attempted to spill a non-spillable item");
57 C->record_method_not_compilable("attempted to spill a non-spillable item");
58 return NULL;
59 }
60 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) {
61 return NULL;
62 }
63 const RegMask *i_mask = &def->out_RegMask();
64 const RegMask *w_mask = C->matcher()->idealreg2spillmask[ireg];
65 const RegMask *o_mask = use ? &use->in_RegMask(uidx) : w_mask;
66 const RegMask *w_i_mask = w_mask->overlap( *i_mask ) ? w_mask : i_mask;
67 const RegMask *w_o_mask;
69 if( w_mask->overlap( *o_mask ) && // Overlap AND
70 ((ireg != Op_RegL && ireg != Op_RegD // Single use or aligned
71 #ifdef _LP64
72 && ireg != Op_RegP
73 #endif
74 ) || o_mask->is_aligned_Pairs()) ) {
75 // Don't come here for mis-aligned doubles
76 w_o_mask = w_mask;
77 } else { // wide ideal mask does not overlap with o_mask
78 // Mis-aligned doubles come here and XMM->FPR moves on x86.
79 w_o_mask = o_mask; // Must target desired registers
80 // Does the ideal-reg-mask overlap with o_mask? I.e., can I use
81 // a reg-reg move or do I need a trip across register classes
82 // (and thus through memory)?
83 if( !C->matcher()->idealreg2regmask[ireg]->overlap( *o_mask) && o_mask->is_UP() )
84 // Here we assume a trip through memory is required.
85 w_i_mask = &C->FIRST_STACK_mask();
86 }
87 return new (C) MachSpillCopyNode( def, *w_i_mask, *w_o_mask );
88 }
90 //------------------------------insert_proj------------------------------------
91 // Insert the spill at chosen location. Skip over any intervening Proj's or
92 // Phis. Skip over a CatchNode and projs, inserting in the fall-through block
93 // instead. Update high-pressure indices. Create a new live range.
94 void PhaseChaitin::insert_proj( Block *b, uint i, Node *spill, uint maxlrg ) {
95 // Skip intervening ProjNodes. Do not insert between a ProjNode and
96 // its definer.
97 while( i < b->_nodes.size() &&
98 (b->_nodes[i]->is_Proj() ||
99 b->_nodes[i]->is_Phi() ) )
100 i++;
102 // Do not insert between a call and his Catch
103 if( b->_nodes[i]->is_Catch() ) {
104 // Put the instruction at the top of the fall-thru block.
105 // Find the fall-thru projection
106 while( 1 ) {
107 const CatchProjNode *cp = b->_nodes[++i]->as_CatchProj();
108 if( cp->_con == CatchProjNode::fall_through_index )
109 break;
110 }
111 int sidx = i - b->end_idx()-1;
112 b = b->_succs[sidx]; // Switch to successor block
113 i = 1; // Right at start of block
114 }
116 b->_nodes.insert(i,spill); // Insert node in block
117 _cfg._bbs.map(spill->_idx,b); // Update node->block mapping to reflect
118 // Adjust the point where we go hi-pressure
119 if( i <= b->_ihrp_index ) b->_ihrp_index++;
120 if( i <= b->_fhrp_index ) b->_fhrp_index++;
122 // Assign a new Live Range Number to the SpillCopy and grow
123 // the node->live range mapping.
124 new_lrg(spill,maxlrg);
125 }
127 //------------------------------split_DEF--------------------------------------
128 // There are four categories of Split; UP/DOWN x DEF/USE
129 // Only three of these really occur as DOWN/USE will always color
130 // Any Split with a DEF cannot CISC-Spill now. Thus we need
131 // two helper routines, one for Split DEFS (insert after instruction),
132 // one for Split USES (insert before instruction). DEF insertion
133 // happens inside Split, where the Leaveblock array is updated.
134 uint PhaseChaitin::split_DEF( Node *def, Block *b, int loc, uint maxlrg, Node **Reachblock, Node **debug_defs, GrowableArray<uint> splits, int slidx ) {
135 #ifdef ASSERT
136 // Increment the counter for this lrg
137 splits.at_put(slidx, splits.at(slidx)+1);
138 #endif
139 // If we are spilling the memory op for an implicit null check, at the
140 // null check location (ie - null check is in HRP block) we need to do
141 // the null-check first, then spill-down in the following block.
142 // (The implicit_null_check function ensures the use is also dominated
143 // by the branch-not-taken block.)
144 Node *be = b->end();
145 if( be->is_MachNullCheck() && be->in(1) == def && def == b->_nodes[loc] ) {
146 // Spill goes in the branch-not-taken block
147 b = b->_succs[b->_nodes[b->end_idx()+1]->Opcode() == Op_IfTrue];
148 loc = 0; // Just past the Region
149 }
150 assert( loc >= 0, "must insert past block head" );
152 // Get a def-side SpillCopy
153 Node *spill = get_spillcopy_wide(def,NULL,0);
154 // Did we fail to split?, then bail
155 if (!spill) {
156 return 0;
157 }
159 // Insert the spill at chosen location
160 insert_proj( b, loc+1, spill, maxlrg++);
162 // Insert new node into Reaches array
163 Reachblock[slidx] = spill;
164 // Update debug list of reaching down definitions by adding this one
165 debug_defs[slidx] = spill;
167 // return updated count of live ranges
168 return maxlrg;
169 }
171 //------------------------------split_USE--------------------------------------
172 // Splits at uses can involve redeffing the LRG, so no CISC Spilling there.
173 // Debug uses want to know if def is already stack enabled.
174 uint PhaseChaitin::split_USE( Node *def, Block *b, Node *use, uint useidx, uint maxlrg, bool def_down, bool cisc_sp, GrowableArray<uint> splits, int slidx ) {
175 #ifdef ASSERT
176 // Increment the counter for this lrg
177 splits.at_put(slidx, splits.at(slidx)+1);
178 #endif
180 // Some setup stuff for handling debug node uses
181 JVMState* jvms = use->jvms();
182 uint debug_start = jvms ? jvms->debug_start() : 999999;
183 uint debug_end = jvms ? jvms->debug_end() : 999999;
185 //-------------------------------------------
186 // Check for use of debug info
187 if (useidx >= debug_start && useidx < debug_end) {
188 // Actually it's perfectly legal for constant debug info to appear
189 // just unlikely. In this case the optimizer left a ConI of a 4
190 // as both inputs to a Phi with only a debug use. It's a single-def
191 // live range of a rematerializable value. The live range spills,
192 // rematerializes and now the ConI directly feeds into the debug info.
193 // assert(!def->is_Con(), "constant debug info already constructed directly");
195 // Special split handling for Debug Info
196 // If DEF is DOWN, just hook the edge and return
197 // If DEF is UP, Split it DOWN for this USE.
198 if( def->is_Mach() ) {
199 if( def_down ) {
200 // DEF is DOWN, so connect USE directly to the DEF
201 use->set_req(useidx, def);
202 } else {
203 // Block and index where the use occurs.
204 Block *b = _cfg._bbs[use->_idx];
205 // Put the clone just prior to use
206 int bindex = b->find_node(use);
207 // DEF is UP, so must copy it DOWN and hook in USE
208 // Insert SpillCopy before the USE, which uses DEF as its input,
209 // and defs a new live range, which is used by this node.
210 Node *spill = get_spillcopy_wide(def,use,useidx);
211 // did we fail to split?
212 if (!spill) {
213 // Bail
214 return 0;
215 }
216 // insert into basic block
217 insert_proj( b, bindex, spill, maxlrg++ );
218 // Use the new split
219 use->set_req(useidx,spill);
220 }
221 // No further split handling needed for this use
222 return maxlrg;
223 } // End special splitting for debug info live range
224 } // If debug info
226 // CISC-SPILLING
227 // Finally, check to see if USE is CISC-Spillable, and if so,
228 // gather_lrg_masks will add the flags bit to its mask, and
229 // no use side copy is needed. This frees up the live range
230 // register choices without causing copy coalescing, etc.
231 if( UseCISCSpill && cisc_sp ) {
232 int inp = use->cisc_operand();
233 if( inp != AdlcVMDeps::Not_cisc_spillable )
234 // Convert operand number to edge index number
235 inp = use->as_Mach()->operand_index(inp);
236 if( inp == (int)useidx ) {
237 use->set_req(useidx, def);
238 #ifndef PRODUCT
239 if( TraceCISCSpill ) {
240 tty->print(" set_split: ");
241 use->dump();
242 }
243 #endif
244 return maxlrg;
245 }
246 }
248 //-------------------------------------------
249 // Insert a Copy before the use
251 // Block and index where the use occurs.
252 int bindex;
253 // Phi input spill-copys belong at the end of the prior block
254 if( use->is_Phi() ) {
255 b = _cfg._bbs[b->pred(useidx)->_idx];
256 bindex = b->end_idx();
257 } else {
258 // Put the clone just prior to use
259 bindex = b->find_node(use);
260 }
262 Node *spill = get_spillcopy_wide( def, use, useidx );
263 if( !spill ) return 0; // Bailed out
264 // Insert SpillCopy before the USE, which uses the reaching DEF as
265 // its input, and defs a new live range, which is used by this node.
266 insert_proj( b, bindex, spill, maxlrg++ );
267 // Use the spill/clone
268 use->set_req(useidx,spill);
270 // return updated live range count
271 return maxlrg;
272 }
274 //------------------------------split_Rematerialize----------------------------
275 // Clone a local copy of the def.
276 Node *PhaseChaitin::split_Rematerialize( Node *def, Block *b, uint insidx, uint &maxlrg, GrowableArray<uint> splits, int slidx, uint *lrg2reach, Node **Reachblock, bool walkThru ) {
277 // The input live ranges will be stretched to the site of the new
278 // instruction. They might be stretched past a def and will thus
279 // have the old and new values of the same live range alive at the
280 // same time - a definite no-no. Split out private copies of
281 // the inputs.
282 if( def->req() > 1 ) {
283 for( uint i = 1; i < def->req(); i++ ) {
284 Node *in = def->in(i);
285 // Check for single-def (LRG cannot redefined)
286 uint lidx = n2lidx(in);
287 if( lidx >= _maxlrg ) continue; // Value is a recent spill-copy
288 if (lrgs(lidx).is_singledef()) continue;
290 Block *b_def = _cfg._bbs[def->_idx];
291 int idx_def = b_def->find_node(def);
292 Node *in_spill = get_spillcopy_wide( in, def, i );
293 if( !in_spill ) return 0; // Bailed out
294 insert_proj(b_def,idx_def,in_spill,maxlrg++);
295 if( b_def == b )
296 insidx++;
297 def->set_req(i,in_spill);
298 }
299 }
301 Node *spill = def->clone();
302 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) {
303 // Check when generating nodes
304 return 0;
305 }
307 // See if any inputs are currently being spilled, and take the
308 // latest copy of spilled inputs.
309 if( spill->req() > 1 ) {
310 for( uint i = 1; i < spill->req(); i++ ) {
311 Node *in = spill->in(i);
312 uint lidx = Find_id(in);
314 // Walk backwards thru spill copy node intermediates
315 if (walkThru) {
316 while ( in->is_SpillCopy() && lidx >= _maxlrg ) {
317 in = in->in(1);
318 lidx = Find_id(in);
319 }
321 if (lidx < _maxlrg && lrgs(lidx).is_multidef()) {
322 // walkThru found a multidef LRG, which is unsafe to use, so
323 // just keep the original def used in the clone.
324 in = spill->in(i);
325 lidx = Find_id(in);
326 }
327 }
329 if( lidx < _maxlrg && lrgs(lidx).reg() >= LRG::SPILL_REG ) {
330 Node *rdef = Reachblock[lrg2reach[lidx]];
331 if( rdef ) spill->set_req(i,rdef);
332 }
333 }
334 }
337 assert( spill->out_RegMask().is_UP(), "rematerialize to a reg" );
338 // Rematerialized op is def->spilled+1
339 set_was_spilled(spill);
340 if( _spilled_once.test(def->_idx) )
341 set_was_spilled(spill);
343 insert_proj( b, insidx, spill, maxlrg++ );
344 #ifdef ASSERT
345 // Increment the counter for this lrg
346 splits.at_put(slidx, splits.at(slidx)+1);
347 #endif
348 // See if the cloned def kills any flags, and copy those kills as well
349 uint i = insidx+1;
350 if( clone_projs( b, i, def, spill, maxlrg ) ) {
351 // Adjust the point where we go hi-pressure
352 if( i <= b->_ihrp_index ) b->_ihrp_index++;
353 if( i <= b->_fhrp_index ) b->_fhrp_index++;
354 }
356 return spill;
357 }
359 //------------------------------is_high_pressure-------------------------------
360 // Function to compute whether or not this live range is "high pressure"
361 // in this block - whether it spills eagerly or not.
362 bool PhaseChaitin::is_high_pressure( Block *b, LRG *lrg, uint insidx ) {
363 if( lrg->_was_spilled1 ) return true;
364 // Forced spilling due to conflict? Then split only at binding uses
365 // or defs, not for supposed capacity problems.
366 // CNC - Turned off 7/8/99, causes too much spilling
367 // if( lrg->_is_bound ) return false;
369 // Not yet reached the high-pressure cutoff point, so low pressure
370 uint hrp_idx = lrg->_is_float ? b->_fhrp_index : b->_ihrp_index;
371 if( insidx < hrp_idx ) return false;
372 // Register pressure for the block as a whole depends on reg class
373 int block_pres = lrg->_is_float ? b->_freg_pressure : b->_reg_pressure;
374 // Bound live ranges will split at the binding points first;
375 // Intermediate splits should assume the live range's register set
376 // got "freed up" and that num_regs will become INT_PRESSURE.
377 int bound_pres = lrg->_is_float ? FLOATPRESSURE : INTPRESSURE;
378 // Effective register pressure limit.
379 int lrg_pres = (lrg->get_invalid_mask_size() > lrg->num_regs())
380 ? (lrg->get_invalid_mask_size() >> (lrg->num_regs()-1)) : bound_pres;
381 // High pressure if block pressure requires more register freedom
382 // than live range has.
383 return block_pres >= lrg_pres;
384 }
387 //------------------------------prompt_use---------------------------------
388 // True if lidx is used before any real register is def'd in the block
389 bool PhaseChaitin::prompt_use( Block *b, uint lidx ) {
390 if( lrgs(lidx)._was_spilled2 ) return false;
392 // Scan block for 1st use.
393 for( uint i = 1; i <= b->end_idx(); i++ ) {
394 Node *n = b->_nodes[i];
395 // Ignore PHI use, these can be up or down
396 if( n->is_Phi() ) continue;
397 for( uint j = 1; j < n->req(); j++ )
398 if( Find_id(n->in(j)) == lidx )
399 return true; // Found 1st use!
400 if( n->out_RegMask().is_NotEmpty() ) return false;
401 }
402 return false;
403 }
405 //------------------------------Split--------------------------------------
406 //----------Split Routine----------
407 // ***** NEW SPLITTING HEURISTIC *****
408 // DEFS: If the DEF is in a High Register Pressure(HRP) Block, split there.
409 // Else, no split unless there is a HRP block between a DEF and
410 // one of its uses, and then split at the HRP block.
411 //
412 // USES: If USE is in HRP, split at use to leave main LRG on stack.
413 // Else, hoist LRG back up to register only (ie - split is also DEF)
414 // We will compute a new maxlrg as we go
415 uint PhaseChaitin::Split( uint maxlrg ) {
416 NOT_PRODUCT( Compile::TracePhase t3("regAllocSplit", &_t_regAllocSplit, TimeCompiler); )
418 uint bidx, pidx, slidx, insidx, inpidx, twoidx;
419 uint non_phi = 1, spill_cnt = 0;
420 Node **Reachblock;
421 Node *n1, *n2, *n3;
422 Node_List *defs,*phis;
423 bool *UPblock;
424 bool u1, u2, u3;
425 Block *b, *pred;
426 PhiNode *phi;
427 GrowableArray<uint> lidxs;
429 // Array of counters to count splits per live range
430 GrowableArray<uint> splits;
432 //----------Setup Code----------
433 // Create a convenient mapping from lrg numbers to reaches/leaves indices
434 uint *lrg2reach = NEW_RESOURCE_ARRAY( uint, _maxlrg );
435 // Keep track of DEFS & Phis for later passes
436 defs = new Node_List();
437 phis = new Node_List();
438 // Gather info on which LRG's are spilling, and build maps
439 for( bidx = 1; bidx < _maxlrg; bidx++ ) {
440 if( lrgs(bidx).alive() && lrgs(bidx).reg() >= LRG::SPILL_REG ) {
441 assert(!lrgs(bidx).mask().is_AllStack(),"AllStack should color");
442 lrg2reach[bidx] = spill_cnt;
443 spill_cnt++;
444 lidxs.append(bidx);
445 #ifdef ASSERT
446 // Initialize the split counts to zero
447 splits.append(0);
448 #endif
449 #ifndef PRODUCT
450 if( PrintOpto && WizardMode && lrgs(bidx)._was_spilled1 )
451 tty->print_cr("Warning, 2nd spill of L%d",bidx);
452 #endif
453 }
454 }
456 // Create side arrays for propagating reaching defs info.
457 // Each block needs a node pointer for each spilling live range for the
458 // Def which is live into the block. Phi nodes handle multiple input
459 // Defs by querying the output of their predecessor blocks and resolving
460 // them to a single Def at the phi. The pointer is updated for each
461 // Def in the block, and then becomes the output for the block when
462 // processing of the block is complete. We also need to track whether
463 // a Def is UP or DOWN. UP means that it should get a register (ie -
464 // it is always in LRP regions), and DOWN means that it is probably
465 // on the stack (ie - it crosses HRP regions).
466 Node ***Reaches = NEW_RESOURCE_ARRAY( Node**, _cfg._num_blocks+1 );
467 bool **UP = NEW_RESOURCE_ARRAY( bool*, _cfg._num_blocks+1 );
468 Node **debug_defs = NEW_RESOURCE_ARRAY( Node*, spill_cnt );
469 VectorSet **UP_entry= NEW_RESOURCE_ARRAY( VectorSet*, spill_cnt );
471 // Initialize Reaches & UP
472 for( bidx = 0; bidx < _cfg._num_blocks+1; bidx++ ) {
473 Reaches[bidx] = NEW_RESOURCE_ARRAY( Node*, spill_cnt );
474 UP[bidx] = NEW_RESOURCE_ARRAY( bool, spill_cnt );
475 Node **Reachblock = Reaches[bidx];
476 bool *UPblock = UP[bidx];
477 for( slidx = 0; slidx < spill_cnt; slidx++ ) {
478 UPblock[slidx] = true; // Assume they start in registers
479 Reachblock[slidx] = NULL; // Assume that no def is present
480 }
481 }
483 // Initialize to array of empty vectorsets
484 for( slidx = 0; slidx < spill_cnt; slidx++ )
485 UP_entry[slidx] = new VectorSet(Thread::current()->resource_area());
487 //----------PASS 1----------
488 //----------Propagation & Node Insertion Code----------
489 // Walk the Blocks in RPO for DEF & USE info
490 for( bidx = 0; bidx < _cfg._num_blocks; bidx++ ) {
492 if (C->check_node_count(spill_cnt, out_of_nodes)) {
493 return 0;
494 }
496 b = _cfg._blocks[bidx];
497 // Reaches & UP arrays for this block
498 Reachblock = Reaches[b->_pre_order];
499 UPblock = UP[b->_pre_order];
500 // Reset counter of start of non-Phi nodes in block
501 non_phi = 1;
502 //----------Block Entry Handling----------
503 // Check for need to insert a new phi
504 // Cycle through this block's predecessors, collecting Reaches
505 // info for each spilled LRG. If they are identical, no phi is
506 // needed. If they differ, check for a phi, and insert if missing,
507 // or update edges if present. Set current block's Reaches set to
508 // be either the phi's or the reaching def, as appropriate.
509 // If no Phi is needed, check if the LRG needs to spill on entry
510 // to the block due to HRP.
511 for( slidx = 0; slidx < spill_cnt; slidx++ ) {
512 // Grab the live range number
513 uint lidx = lidxs.at(slidx);
514 // Do not bother splitting or putting in Phis for single-def
515 // rematerialized live ranges. This happens alot to constants
516 // with long live ranges.
517 if( lrgs(lidx).is_singledef() &&
518 lrgs(lidx)._def->rematerialize() ) {
519 // reset the Reaches & UP entries
520 Reachblock[slidx] = lrgs(lidx)._def;
521 UPblock[slidx] = true;
522 // Record following instruction in case 'n' rematerializes and
523 // kills flags
524 Block *pred1 = _cfg._bbs[b->pred(1)->_idx];
525 continue;
526 }
528 // Initialize needs_phi and needs_split
529 bool needs_phi = false;
530 bool needs_split = false;
531 bool has_phi = false;
532 // Walk the predecessor blocks to check inputs for that live range
533 // Grab predecessor block header
534 n1 = b->pred(1);
535 // Grab the appropriate reaching def info for inpidx
536 pred = _cfg._bbs[n1->_idx];
537 pidx = pred->_pre_order;
538 Node **Ltmp = Reaches[pidx];
539 bool *Utmp = UP[pidx];
540 n1 = Ltmp[slidx];
541 u1 = Utmp[slidx];
542 // Initialize node for saving type info
543 n3 = n1;
544 u3 = u1;
546 // Compare inputs to see if a Phi is needed
547 for( inpidx = 2; inpidx < b->num_preds(); inpidx++ ) {
548 // Grab predecessor block headers
549 n2 = b->pred(inpidx);
550 // Grab the appropriate reaching def info for inpidx
551 pred = _cfg._bbs[n2->_idx];
552 pidx = pred->_pre_order;
553 Ltmp = Reaches[pidx];
554 Utmp = UP[pidx];
555 n2 = Ltmp[slidx];
556 u2 = Utmp[slidx];
557 // For each LRG, decide if a phi is necessary
558 if( n1 != n2 ) {
559 needs_phi = true;
560 }
561 // See if the phi has mismatched inputs, UP vs. DOWN
562 if( n1 && n2 && (u1 != u2) ) {
563 needs_split = true;
564 }
565 // Move n2/u2 to n1/u1 for next iteration
566 n1 = n2;
567 u1 = u2;
568 // Preserve a non-NULL predecessor for later type referencing
569 if( (n3 == NULL) && (n2 != NULL) ){
570 n3 = n2;
571 u3 = u2;
572 }
573 } // End for all potential Phi inputs
575 // check block for appropriate phinode & update edges
576 for( insidx = 1; insidx <= b->end_idx(); insidx++ ) {
577 n1 = b->_nodes[insidx];
578 // bail if this is not a phi
579 phi = n1->is_Phi() ? n1->as_Phi() : NULL;
580 if( phi == NULL ) {
581 // Keep track of index of first non-PhiNode instruction in block
582 non_phi = insidx;
583 // break out of the for loop as we have handled all phi nodes
584 break;
585 }
586 // must be looking at a phi
587 if( Find_id(n1) == lidxs.at(slidx) ) {
588 // found the necessary phi
589 needs_phi = false;
590 has_phi = true;
591 // initialize the Reaches entry for this LRG
592 Reachblock[slidx] = phi;
593 break;
594 } // end if found correct phi
595 } // end for all phi's
597 // If a phi is needed or exist, check for it
598 if( needs_phi || has_phi ) {
599 // add new phinode if one not already found
600 if( needs_phi ) {
601 // create a new phi node and insert it into the block
602 // type is taken from left over pointer to a predecessor
603 assert(n3,"No non-NULL reaching DEF for a Phi");
604 phi = new (C, b->num_preds()) PhiNode(b->head(), n3->bottom_type());
605 // initialize the Reaches entry for this LRG
606 Reachblock[slidx] = phi;
608 // add node to block & node_to_block mapping
609 insert_proj( b, insidx++, phi, maxlrg++ );
610 non_phi++;
611 // Reset new phi's mapping to be the spilling live range
612 _names.map(phi->_idx, lidx);
613 assert(Find_id(phi) == lidx,"Bad update on Union-Find mapping");
614 } // end if not found correct phi
615 // Here you have either found or created the Phi, so record it
616 assert(phi != NULL,"Must have a Phi Node here");
617 phis->push(phi);
618 // PhiNodes should either force the LRG UP or DOWN depending
619 // on its inputs and the register pressure in the Phi's block.
620 UPblock[slidx] = true; // Assume new DEF is UP
621 // If entering a high-pressure area with no immediate use,
622 // assume Phi is DOWN
623 if( is_high_pressure( b, &lrgs(lidx), b->end_idx()) && !prompt_use(b,lidx) )
624 UPblock[slidx] = false;
625 // If we are not split up/down and all inputs are down, then we
626 // are down
627 if( !needs_split && !u3 )
628 UPblock[slidx] = false;
629 } // end if phi is needed
631 // Do not need a phi, so grab the reaching DEF
632 else {
633 // Grab predecessor block header
634 n1 = b->pred(1);
635 // Grab the appropriate reaching def info for k
636 pred = _cfg._bbs[n1->_idx];
637 pidx = pred->_pre_order;
638 Node **Ltmp = Reaches[pidx];
639 bool *Utmp = UP[pidx];
640 // reset the Reaches & UP entries
641 Reachblock[slidx] = Ltmp[slidx];
642 UPblock[slidx] = Utmp[slidx];
643 } // end else no Phi is needed
644 } // end for all spilling live ranges
645 // DEBUG
646 #ifndef PRODUCT
647 if(trace_spilling()) {
648 tty->print("/`\nBlock %d: ", b->_pre_order);
649 tty->print("Reaching Definitions after Phi handling\n");
650 for( uint x = 0; x < spill_cnt; x++ ) {
651 tty->print("Spill Idx %d: UP %d: Node\n",x,UPblock[x]);
652 if( Reachblock[x] )
653 Reachblock[x]->dump();
654 else
655 tty->print("Undefined\n");
656 }
657 }
658 #endif
660 //----------Non-Phi Node Splitting----------
661 // Since phi-nodes have now been handled, the Reachblock array for this
662 // block is initialized with the correct starting value for the defs which
663 // reach non-phi instructions in this block. Thus, process non-phi
664 // instructions normally, inserting SpillCopy nodes for all spill
665 // locations.
667 // Memoize any DOWN reaching definitions for use as DEBUG info
668 for( insidx = 0; insidx < spill_cnt; insidx++ ) {
669 debug_defs[insidx] = (UPblock[insidx]) ? NULL : Reachblock[insidx];
670 if( UPblock[insidx] ) // Memoize UP decision at block start
671 UP_entry[insidx]->set( b->_pre_order );
672 }
674 //----------Walk Instructions in the Block and Split----------
675 // For all non-phi instructions in the block
676 for( insidx = 1; insidx <= b->end_idx(); insidx++ ) {
677 Node *n = b->_nodes[insidx];
678 // Find the defining Node's live range index
679 uint defidx = Find_id(n);
680 uint cnt = n->req();
682 if( n->is_Phi() ) {
683 // Skip phi nodes after removing dead copies.
684 if( defidx < _maxlrg ) {
685 // Check for useless Phis. These appear if we spill, then
686 // coalesce away copies. Dont touch Phis in spilling live
687 // ranges; they are busy getting modifed in this pass.
688 if( lrgs(defidx).reg() < LRG::SPILL_REG ) {
689 uint i;
690 Node *u = NULL;
691 // Look for the Phi merging 2 unique inputs
692 for( i = 1; i < cnt; i++ ) {
693 // Ignore repeats and self
694 if( n->in(i) != u && n->in(i) != n ) {
695 // Found a unique input
696 if( u != NULL ) // If it's the 2nd, bail out
697 break;
698 u = n->in(i); // Else record it
699 }
700 }
701 assert( u, "at least 1 valid input expected" );
702 if( i >= cnt ) { // Found one unique input
703 assert(Find_id(n) == Find_id(u), "should be the same lrg");
704 n->replace_by(u); // Then replace with unique input
705 n->disconnect_inputs(NULL);
706 b->_nodes.remove(insidx);
707 insidx--;
708 b->_ihrp_index--;
709 b->_fhrp_index--;
710 }
711 }
712 }
713 continue;
714 }
715 assert( insidx > b->_ihrp_index ||
716 (b->_reg_pressure < (uint)INTPRESSURE) ||
717 b->_ihrp_index > 4000000 ||
718 b->_ihrp_index >= b->end_idx() ||
719 !b->_nodes[b->_ihrp_index]->is_Proj(), "" );
720 assert( insidx > b->_fhrp_index ||
721 (b->_freg_pressure < (uint)FLOATPRESSURE) ||
722 b->_fhrp_index > 4000000 ||
723 b->_fhrp_index >= b->end_idx() ||
724 !b->_nodes[b->_fhrp_index]->is_Proj(), "" );
726 // ********** Handle Crossing HRP Boundry **********
727 if( (insidx == b->_ihrp_index) || (insidx == b->_fhrp_index) ) {
728 for( slidx = 0; slidx < spill_cnt; slidx++ ) {
729 // Check for need to split at HRP boundary - split if UP
730 n1 = Reachblock[slidx];
731 // bail out if no reaching DEF
732 if( n1 == NULL ) continue;
733 // bail out if live range is 'isolated' around inner loop
734 uint lidx = lidxs.at(slidx);
735 // If live range is currently UP
736 if( UPblock[slidx] ) {
737 // set location to insert spills at
738 // SPLIT DOWN HERE - NO CISC SPILL
739 if( is_high_pressure( b, &lrgs(lidx), insidx ) &&
740 !n1->rematerialize() ) {
741 // If there is already a valid stack definition available, use it
742 if( debug_defs[slidx] != NULL ) {
743 Reachblock[slidx] = debug_defs[slidx];
744 }
745 else {
746 // Insert point is just past last use or def in the block
747 int insert_point = insidx-1;
748 while( insert_point > 0 ) {
749 Node *n = b->_nodes[insert_point];
750 // Hit top of block? Quit going backwards
751 if( n->is_Phi() ) break;
752 // Found a def? Better split after it.
753 if( n2lidx(n) == lidx ) break;
754 // Look for a use
755 uint i;
756 for( i = 1; i < n->req(); i++ )
757 if( n2lidx(n->in(i)) == lidx )
758 break;
759 // Found a use? Better split after it.
760 if( i < n->req() ) break;
761 insert_point--;
762 }
763 maxlrg = split_DEF( n1, b, insert_point, maxlrg, Reachblock, debug_defs, splits, slidx);
764 // If it wasn't split bail
765 if (!maxlrg) {
766 return 0;
767 }
768 insidx++;
769 }
770 // This is a new DEF, so update UP
771 UPblock[slidx] = false;
772 #ifndef PRODUCT
773 // DEBUG
774 if( trace_spilling() ) {
775 tty->print("\nNew Split DOWN DEF of Spill Idx ");
776 tty->print("%d, UP %d:\n",slidx,false);
777 n1->dump();
778 }
779 #endif
780 }
781 } // end if LRG is UP
782 } // end for all spilling live ranges
783 assert( b->_nodes[insidx] == n, "got insidx set incorrectly" );
784 } // end if crossing HRP Boundry
786 // If the LRG index is oob, then this is a new spillcopy, skip it.
787 if( defidx >= _maxlrg ) {
788 continue;
789 }
790 LRG &deflrg = lrgs(defidx);
791 uint copyidx = n->is_Copy();
792 // Remove coalesced copy from CFG
793 if( copyidx && defidx == n2lidx(n->in(copyidx)) ) {
794 n->replace_by( n->in(copyidx) );
795 n->set_req( copyidx, NULL );
796 b->_nodes.remove(insidx--);
797 b->_ihrp_index--; // Adjust the point where we go hi-pressure
798 b->_fhrp_index--;
799 continue;
800 }
802 #define DERIVED 0
804 // ********** Handle USES **********
805 bool nullcheck = false;
806 // Implicit null checks never use the spilled value
807 if( n->is_MachNullCheck() )
808 nullcheck = true;
809 if( !nullcheck ) {
810 // Search all inputs for a Spill-USE
811 JVMState* jvms = n->jvms();
812 uint oopoff = jvms ? jvms->oopoff() : cnt;
813 uint old_last = cnt - 1;
814 for( inpidx = 1; inpidx < cnt; inpidx++ ) {
815 // Derived/base pairs may be added to our inputs during this loop.
816 // If inpidx > old_last, then one of these new inputs is being
817 // handled. Skip the derived part of the pair, but process
818 // the base like any other input.
819 if( inpidx > old_last && ((inpidx - oopoff) & 1) == DERIVED ) {
820 continue; // skip derived_debug added below
821 }
822 // Get lidx of input
823 uint useidx = Find_id(n->in(inpidx));
824 // Not a brand-new split, and it is a spill use
825 if( useidx < _maxlrg && lrgs(useidx).reg() >= LRG::SPILL_REG ) {
826 // Check for valid reaching DEF
827 slidx = lrg2reach[useidx];
828 Node *def = Reachblock[slidx];
829 assert( def != NULL, "Using Undefined Value in Split()\n");
831 // (+++) %%%% remove this in favor of pre-pass in matcher.cpp
832 // monitor references do not care where they live, so just hook
833 if ( jvms && jvms->is_monitor_use(inpidx) ) {
834 // The effect of this clone is to drop the node out of the block,
835 // so that the allocator does not see it anymore, and therefore
836 // does not attempt to assign it a register.
837 def = def->clone();
838 _names.extend(def->_idx,0);
839 _cfg._bbs.map(def->_idx,b);
840 n->set_req(inpidx, def);
841 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) {
842 return 0;
843 }
844 continue;
845 }
847 // Rematerializable? Then clone def at use site instead
848 // of store/load
849 if( def->rematerialize() ) {
850 int old_size = b->_nodes.size();
851 def = split_Rematerialize( def, b, insidx, maxlrg, splits, slidx, lrg2reach, Reachblock, true );
852 if( !def ) return 0; // Bail out
853 insidx += b->_nodes.size()-old_size;
854 }
856 MachNode *mach = n->is_Mach() ? n->as_Mach() : NULL;
857 // Base pointers and oopmap references do not care where they live.
858 if ((inpidx >= oopoff) ||
859 (mach && mach->ideal_Opcode() == Op_AddP && inpidx == AddPNode::Base)) {
860 if (def->rematerialize() && lrgs(useidx)._was_spilled2) {
861 // This def has been rematerialized a couple of times without
862 // progress. It doesn't care if it lives UP or DOWN, so
863 // spill it down now.
864 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false,splits,slidx);
865 // If it wasn't split bail
866 if (!maxlrg) {
867 return 0;
868 }
869 insidx++; // Reset iterator to skip USE side split
870 } else {
871 // Just hook the def edge
872 n->set_req(inpidx, def);
873 }
875 if (inpidx >= oopoff) {
876 // After oopoff, we have derived/base pairs. We must mention all
877 // derived pointers here as derived/base pairs for GC. If the
878 // derived value is spilling and we have a copy both in Reachblock
879 // (called here 'def') and debug_defs[slidx] we need to mention
880 // both in derived/base pairs or kill one.
881 Node *derived_debug = debug_defs[slidx];
882 if( ((inpidx - oopoff) & 1) == DERIVED && // derived vs base?
883 mach && mach->ideal_Opcode() != Op_Halt &&
884 derived_debug != NULL &&
885 derived_debug != def ) { // Actual 2nd value appears
886 // We have already set 'def' as a derived value.
887 // Also set debug_defs[slidx] as a derived value.
888 uint k;
889 for( k = oopoff; k < cnt; k += 2 )
890 if( n->in(k) == derived_debug )
891 break; // Found an instance of debug derived
892 if( k == cnt ) {// No instance of debug_defs[slidx]
893 // Add a derived/base pair to cover the debug info.
894 // We have to process the added base later since it is not
895 // handled yet at this point but skip derived part.
896 assert(((n->req() - oopoff) & 1) == DERIVED,
897 "must match skip condition above");
898 n->add_req( derived_debug ); // this will be skipped above
899 n->add_req( n->in(inpidx+1) ); // this will be processed
900 // Increment cnt to handle added input edges on
901 // subsequent iterations.
902 cnt += 2;
903 }
904 }
905 }
906 continue;
907 }
908 // Special logic for DEBUG info
909 if( jvms && b->_freq > BLOCK_FREQUENCY(0.5) ) {
910 uint debug_start = jvms->debug_start();
911 // If this is debug info use & there is a reaching DOWN def
912 if ((debug_start <= inpidx) && (debug_defs[slidx] != NULL)) {
913 assert(inpidx < oopoff, "handle only debug info here");
914 // Just hook it in & move on
915 n->set_req(inpidx, debug_defs[slidx]);
916 // (Note that this can make two sides of a split live at the
917 // same time: The debug def on stack, and another def in a
918 // register. The GC needs to know about both of them, but any
919 // derived pointers after oopoff will refer to only one of the
920 // two defs and the GC would therefore miss the other. Thus
921 // this hack is only allowed for debug info which is Java state
922 // and therefore never a derived pointer.)
923 continue;
924 }
925 }
926 // Grab register mask info
927 const RegMask &dmask = def->out_RegMask();
928 const RegMask &umask = n->in_RegMask(inpidx);
930 assert(inpidx < oopoff, "cannot use-split oop map info");
932 bool dup = UPblock[slidx];
933 bool uup = umask.is_UP();
935 // Need special logic to handle bound USES. Insert a split at this
936 // bound use if we can't rematerialize the def, or if we need the
937 // split to form a misaligned pair.
938 if( !umask.is_AllStack() &&
939 (int)umask.Size() <= lrgs(useidx).num_regs() &&
940 (!def->rematerialize() ||
941 umask.is_misaligned_Pair())) {
942 // These need a Split regardless of overlap or pressure
943 // SPLIT - NO DEF - NO CISC SPILL
944 maxlrg = split_USE(def,b,n,inpidx,maxlrg,dup,false, splits,slidx);
945 // If it wasn't split bail
946 if (!maxlrg) {
947 return 0;
948 }
949 insidx++; // Reset iterator to skip USE side split
950 continue;
951 }
952 // Here is the logic chart which describes USE Splitting:
953 // 0 = false or DOWN, 1 = true or UP
954 //
955 // Overlap | DEF | USE | Action
956 //-------------------------------------------------------
957 // 0 | 0 | 0 | Copy - mem -> mem
958 // 0 | 0 | 1 | Split-UP - Check HRP
959 // 0 | 1 | 0 | Split-DOWN - Debug Info?
960 // 0 | 1 | 1 | Copy - reg -> reg
961 // 1 | 0 | 0 | Reset Input Edge (no Split)
962 // 1 | 0 | 1 | Split-UP - Check HRP
963 // 1 | 1 | 0 | Split-DOWN - Debug Info?
964 // 1 | 1 | 1 | Reset Input Edge (no Split)
965 //
966 // So, if (dup == uup), then overlap test determines action,
967 // with true being no split, and false being copy. Else,
968 // if DEF is DOWN, Split-UP, and check HRP to decide on
969 // resetting DEF. Finally if DEF is UP, Split-DOWN, with
970 // special handling for Debug Info.
971 if( dup == uup ) {
972 if( dmask.overlap(umask) ) {
973 // Both are either up or down, and there is overlap, No Split
974 n->set_req(inpidx, def);
975 }
976 else { // Both are either up or down, and there is no overlap
977 if( dup ) { // If UP, reg->reg copy
978 // COPY ACROSS HERE - NO DEF - NO CISC SPILL
979 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false, splits,slidx);
980 // If it wasn't split bail
981 if (!maxlrg) {
982 return 0;
983 }
984 insidx++; // Reset iterator to skip USE side split
985 }
986 else { // DOWN, mem->mem copy
987 // COPY UP & DOWN HERE - NO DEF - NO CISC SPILL
988 // First Split-UP to move value into Register
989 uint def_ideal = def->ideal_reg();
990 const RegMask* tmp_rm = Matcher::idealreg2regmask[def_ideal];
991 Node *spill = new (C) MachSpillCopyNode(def, dmask, *tmp_rm);
992 insert_proj( b, insidx, spill, maxlrg );
993 // Then Split-DOWN as if previous Split was DEF
994 maxlrg = split_USE(spill,b,n,inpidx,maxlrg,false,false, splits,slidx);
995 // If it wasn't split bail
996 if (!maxlrg) {
997 return 0;
998 }
999 insidx += 2; // Reset iterator to skip USE side splits
1000 }
1001 } // End else no overlap
1002 } // End if dup == uup
1003 // dup != uup, so check dup for direction of Split
1004 else {
1005 if( dup ) { // If UP, Split-DOWN and check Debug Info
1006 // If this node is already a SpillCopy, just patch the edge
1007 // except the case of spilling to stack.
1008 if( n->is_SpillCopy() ) {
1009 RegMask tmp_rm(umask);
1010 tmp_rm.SUBTRACT(Matcher::STACK_ONLY_mask);
1011 if( dmask.overlap(tmp_rm) ) {
1012 if( def != n->in(inpidx) ) {
1013 n->set_req(inpidx, def);
1014 }
1015 continue;
1016 }
1017 }
1018 // COPY DOWN HERE - NO DEF - NO CISC SPILL
1019 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false, splits,slidx);
1020 // If it wasn't split bail
1021 if (!maxlrg) {
1022 return 0;
1023 }
1024 insidx++; // Reset iterator to skip USE side split
1025 // Check for debug-info split. Capture it for later
1026 // debug splits of the same value
1027 if (jvms && jvms->debug_start() <= inpidx && inpidx < oopoff)
1028 debug_defs[slidx] = n->in(inpidx);
1030 }
1031 else { // DOWN, Split-UP and check register pressure
1032 if( is_high_pressure( b, &lrgs(useidx), insidx ) ) {
1033 // COPY UP HERE - NO DEF - CISC SPILL
1034 maxlrg = split_USE(def,b,n,inpidx,maxlrg,true,true, splits,slidx);
1035 // If it wasn't split bail
1036 if (!maxlrg) {
1037 return 0;
1038 }
1039 insidx++; // Reset iterator to skip USE side split
1040 } else { // LRP
1041 // COPY UP HERE - WITH DEF - NO CISC SPILL
1042 maxlrg = split_USE(def,b,n,inpidx,maxlrg,true,false, splits,slidx);
1043 // If it wasn't split bail
1044 if (!maxlrg) {
1045 return 0;
1046 }
1047 // Flag this lift-up in a low-pressure block as
1048 // already-spilled, so if it spills again it will
1049 // spill hard (instead of not spilling hard and
1050 // coalescing away).
1051 set_was_spilled(n->in(inpidx));
1052 // Since this is a new DEF, update Reachblock & UP
1053 Reachblock[slidx] = n->in(inpidx);
1054 UPblock[slidx] = true;
1055 insidx++; // Reset iterator to skip USE side split
1056 }
1057 } // End else DOWN
1058 } // End dup != uup
1059 } // End if Spill USE
1060 } // End For All Inputs
1061 } // End If not nullcheck
1063 // ********** Handle DEFS **********
1064 // DEFS either Split DOWN in HRP regions or when the LRG is bound, or
1065 // just reset the Reaches info in LRP regions. DEFS must always update
1066 // UP info.
1067 if( deflrg.reg() >= LRG::SPILL_REG ) { // Spilled?
1068 uint slidx = lrg2reach[defidx];
1069 // Add to defs list for later assignment of new live range number
1070 defs->push(n);
1071 // Set a flag on the Node indicating it has already spilled.
1072 // Only do it for capacity spills not conflict spills.
1073 if( !deflrg._direct_conflict )
1074 set_was_spilled(n);
1075 assert(!n->is_Phi(),"Cannot insert Phi into DEFS list");
1076 // Grab UP info for DEF
1077 const RegMask &dmask = n->out_RegMask();
1078 bool defup = dmask.is_UP();
1079 // Only split at Def if this is a HRP block or bound (and spilled once)
1080 if( !n->rematerialize() &&
1081 (((dmask.is_bound1() || dmask.is_bound2() || dmask.is_misaligned_Pair()) &&
1082 (deflrg._direct_conflict || deflrg._must_spill)) ||
1083 // Check for LRG being up in a register and we are inside a high
1084 // pressure area. Spill it down immediately.
1085 (defup && is_high_pressure(b,&deflrg,insidx))) ) {
1086 assert( !n->rematerialize(), "" );
1087 assert( !n->is_SpillCopy(), "" );
1088 // Do a split at the def site.
1089 maxlrg = split_DEF( n, b, insidx, maxlrg, Reachblock, debug_defs, splits, slidx );
1090 // If it wasn't split bail
1091 if (!maxlrg) {
1092 return 0;
1093 }
1094 // Split DEF's Down
1095 UPblock[slidx] = 0;
1096 #ifndef PRODUCT
1097 // DEBUG
1098 if( trace_spilling() ) {
1099 tty->print("\nNew Split DOWN DEF of Spill Idx ");
1100 tty->print("%d, UP %d:\n",slidx,false);
1101 n->dump();
1102 }
1103 #endif
1104 }
1105 else { // Neither bound nor HRP, must be LRP
1106 // otherwise, just record the def
1107 Reachblock[slidx] = n;
1108 // UP should come from the outRegmask() of the DEF
1109 UPblock[slidx] = defup;
1110 // Update debug list of reaching down definitions, kill if DEF is UP
1111 debug_defs[slidx] = defup ? NULL : n;
1112 #ifndef PRODUCT
1113 // DEBUG
1114 if( trace_spilling() ) {
1115 tty->print("\nNew DEF of Spill Idx ");
1116 tty->print("%d, UP %d:\n",slidx,defup);
1117 n->dump();
1118 }
1119 #endif
1120 } // End else LRP
1121 } // End if spill def
1123 // ********** Split Left Over Mem-Mem Moves **********
1124 // Check for mem-mem copies and split them now. Do not do this
1125 // to copies about to be spilled; they will be Split shortly.
1126 if( copyidx ) {
1127 Node *use = n->in(copyidx);
1128 uint useidx = Find_id(use);
1129 if( useidx < _maxlrg && // This is not a new split
1130 OptoReg::is_stack(deflrg.reg()) &&
1131 deflrg.reg() < LRG::SPILL_REG ) { // And DEF is from stack
1132 LRG &uselrg = lrgs(useidx);
1133 if( OptoReg::is_stack(uselrg.reg()) &&
1134 uselrg.reg() < LRG::SPILL_REG && // USE is from stack
1135 deflrg.reg() != uselrg.reg() ) { // Not trivially removed
1136 uint def_ideal_reg = Matcher::base2reg[n->bottom_type()->base()];
1137 const RegMask &def_rm = *Matcher::idealreg2regmask[def_ideal_reg];
1138 const RegMask &use_rm = n->in_RegMask(copyidx);
1139 if( def_rm.overlap(use_rm) && n->is_SpillCopy() ) { // Bug 4707800, 'n' may be a storeSSL
1140 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) { // Check when generating nodes
1141 return 0;
1142 }
1143 Node *spill = new (C) MachSpillCopyNode(use,use_rm,def_rm);
1144 n->set_req(copyidx,spill);
1145 n->as_MachSpillCopy()->set_in_RegMask(def_rm);
1146 // Put the spill just before the copy
1147 insert_proj( b, insidx++, spill, maxlrg++ );
1148 }
1149 }
1150 }
1151 }
1152 } // End For All Instructions in Block - Non-PHI Pass
1154 // Check if each LRG is live out of this block so as not to propagate
1155 // beyond the last use of a LRG.
1156 for( slidx = 0; slidx < spill_cnt; slidx++ ) {
1157 uint defidx = lidxs.at(slidx);
1158 IndexSet *liveout = _live->live(b);
1159 if( !liveout->member(defidx) ) {
1160 #ifdef ASSERT
1161 // The index defidx is not live. Check the liveout array to ensure that
1162 // it contains no members which compress to defidx. Finding such an
1163 // instance may be a case to add liveout adjustment in compress_uf_map().
1164 // See 5063219.
1165 uint member;
1166 IndexSetIterator isi(liveout);
1167 while ((member = isi.next()) != 0) {
1168 assert(defidx != Find_const(member), "Live out member has not been compressed");
1169 }
1170 #endif
1171 Reachblock[slidx] = NULL;
1172 } else {
1173 assert(Reachblock[slidx] != NULL,"No reaching definition for liveout value");
1174 }
1175 }
1176 #ifndef PRODUCT
1177 if( trace_spilling() )
1178 b->dump();
1179 #endif
1180 } // End For All Blocks
1182 //----------PASS 2----------
1183 // Reset all DEF live range numbers here
1184 for( insidx = 0; insidx < defs->size(); insidx++ ) {
1185 // Grab the def
1186 n1 = defs->at(insidx);
1187 // Set new lidx for DEF
1188 new_lrg(n1, maxlrg++);
1189 }
1190 //----------Phi Node Splitting----------
1191 // Clean up a phi here, and assign a new live range number
1192 // Cycle through this block's predecessors, collecting Reaches
1193 // info for each spilled LRG and update edges.
1194 // Walk the phis list to patch inputs, split phis, and name phis
1195 for( insidx = 0; insidx < phis->size(); insidx++ ) {
1196 Node *phi = phis->at(insidx);
1197 assert(phi->is_Phi(),"This list must only contain Phi Nodes");
1198 Block *b = _cfg._bbs[phi->_idx];
1199 // Grab the live range number
1200 uint lidx = Find_id(phi);
1201 uint slidx = lrg2reach[lidx];
1202 // Update node to lidx map
1203 new_lrg(phi, maxlrg++);
1204 // Get PASS1's up/down decision for the block.
1205 int phi_up = !!UP_entry[slidx]->test(b->_pre_order);
1207 // Force down if double-spilling live range
1208 if( lrgs(lidx)._was_spilled1 )
1209 phi_up = false;
1211 // When splitting a Phi we an split it normal or "inverted".
1212 // An inverted split makes the splits target the Phi's UP/DOWN
1213 // sense inverted; then the Phi is followed by a final def-side
1214 // split to invert back. It changes which blocks the spill code
1215 // goes in.
1217 // Walk the predecessor blocks and assign the reaching def to the Phi.
1218 // Split Phi nodes by placing USE side splits wherever the reaching
1219 // DEF has the wrong UP/DOWN value.
1220 for( uint i = 1; i < b->num_preds(); i++ ) {
1221 // Get predecessor block pre-order number
1222 Block *pred = _cfg._bbs[b->pred(i)->_idx];
1223 pidx = pred->_pre_order;
1224 // Grab reaching def
1225 Node *def = Reaches[pidx][slidx];
1226 assert( def, "must have reaching def" );
1227 // If input up/down sense and reg-pressure DISagree
1228 if( def->rematerialize() ) {
1229 def = split_Rematerialize( def, pred, pred->end_idx(), maxlrg, splits, slidx, lrg2reach, Reachblock, false );
1230 if( !def ) return 0; // Bail out
1231 }
1232 // Update the Phi's input edge array
1233 phi->set_req(i,def);
1234 // Grab the UP/DOWN sense for the input
1235 u1 = UP[pidx][slidx];
1236 if( u1 != (phi_up != 0)) {
1237 maxlrg = split_USE(def, b, phi, i, maxlrg, !u1, false, splits,slidx);
1238 // If it wasn't split bail
1239 if (!maxlrg) {
1240 return 0;
1241 }
1242 }
1243 } // End for all inputs to the Phi
1244 } // End for all Phi Nodes
1245 // Update _maxlrg to save Union asserts
1246 _maxlrg = maxlrg;
1249 //----------PASS 3----------
1250 // Pass over all Phi's to union the live ranges
1251 for( insidx = 0; insidx < phis->size(); insidx++ ) {
1252 Node *phi = phis->at(insidx);
1253 assert(phi->is_Phi(),"This list must only contain Phi Nodes");
1254 // Walk all inputs to Phi and Union input live range with Phi live range
1255 for( uint i = 1; i < phi->req(); i++ ) {
1256 // Grab the input node
1257 Node *n = phi->in(i);
1258 assert( n, "" );
1259 uint lidx = Find(n);
1260 uint pidx = Find(phi);
1261 if( lidx < pidx )
1262 Union(n, phi);
1263 else if( lidx > pidx )
1264 Union(phi, n);
1265 } // End for all inputs to the Phi Node
1266 } // End for all Phi Nodes
1267 // Now union all two address instructions
1268 for( insidx = 0; insidx < defs->size(); insidx++ ) {
1269 // Grab the def
1270 n1 = defs->at(insidx);
1271 // Set new lidx for DEF & handle 2-addr instructions
1272 if( n1->is_Mach() && ((twoidx = n1->as_Mach()->two_adr()) != 0) ) {
1273 assert( Find(n1->in(twoidx)) < maxlrg,"Assigning bad live range index");
1274 // Union the input and output live ranges
1275 uint lr1 = Find(n1);
1276 uint lr2 = Find(n1->in(twoidx));
1277 if( lr1 < lr2 )
1278 Union(n1, n1->in(twoidx));
1279 else if( lr1 > lr2 )
1280 Union(n1->in(twoidx), n1);
1281 } // End if two address
1282 } // End for all defs
1283 // DEBUG
1284 #ifdef ASSERT
1285 // Validate all live range index assignments
1286 for( bidx = 0; bidx < _cfg._num_blocks; bidx++ ) {
1287 b = _cfg._blocks[bidx];
1288 for( insidx = 0; insidx <= b->end_idx(); insidx++ ) {
1289 Node *n = b->_nodes[insidx];
1290 uint defidx = Find(n);
1291 assert(defidx < _maxlrg,"Bad live range index in Split");
1292 assert(defidx < maxlrg,"Bad live range index in Split");
1293 }
1294 }
1295 // Issue a warning if splitting made no progress
1296 int noprogress = 0;
1297 for( slidx = 0; slidx < spill_cnt; slidx++ ) {
1298 if( PrintOpto && WizardMode && splits.at(slidx) == 0 ) {
1299 tty->print_cr("Failed to split live range %d", lidxs.at(slidx));
1300 //BREAKPOINT;
1301 }
1302 else {
1303 noprogress++;
1304 }
1305 }
1306 if(!noprogress) {
1307 tty->print_cr("Failed to make progress in Split");
1308 //BREAKPOINT;
1309 }
1310 #endif
1311 // Return updated count of live ranges
1312 return maxlrg;
1313 }