Thu, 12 Oct 2017 21:27:07 +0800
merge
1 /*
2 * Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "compiler/compileLog.hpp"
27 #include "memory/allocation.inline.hpp"
28 #include "opto/addnode.hpp"
29 #include "opto/callnode.hpp"
30 #include "opto/connode.hpp"
31 #include "opto/divnode.hpp"
32 #include "opto/loopnode.hpp"
33 #include "opto/mulnode.hpp"
34 #include "opto/rootnode.hpp"
35 #include "opto/runtime.hpp"
36 #include "opto/subnode.hpp"
38 //------------------------------is_loop_exit-----------------------------------
39 // Given an IfNode, return the loop-exiting projection or NULL if both
40 // arms remain in the loop.
41 Node *IdealLoopTree::is_loop_exit(Node *iff) const {
42 if( iff->outcnt() != 2 ) return NULL; // Ignore partially dead tests
43 PhaseIdealLoop *phase = _phase;
44 // Test is an IfNode, has 2 projections. If BOTH are in the loop
45 // we need loop unswitching instead of peeling.
46 if( !is_member(phase->get_loop( iff->raw_out(0) )) )
47 return iff->raw_out(0);
48 if( !is_member(phase->get_loop( iff->raw_out(1) )) )
49 return iff->raw_out(1);
50 return NULL;
51 }
54 //=============================================================================
57 //------------------------------record_for_igvn----------------------------
58 // Put loop body on igvn work list
59 void IdealLoopTree::record_for_igvn() {
60 for( uint i = 0; i < _body.size(); i++ ) {
61 Node *n = _body.at(i);
62 _phase->_igvn._worklist.push(n);
63 }
64 }
66 //------------------------------compute_exact_trip_count-----------------------
67 // Compute loop exact trip count if possible. Do not recalculate trip count for
68 // split loops (pre-main-post) which have their limits and inits behind Opaque node.
69 void IdealLoopTree::compute_exact_trip_count( PhaseIdealLoop *phase ) {
70 if (!_head->as_Loop()->is_valid_counted_loop()) {
71 return;
72 }
73 CountedLoopNode* cl = _head->as_CountedLoop();
74 // Trip count may become nonexact for iteration split loops since
75 // RCE modifies limits. Note, _trip_count value is not reset since
76 // it is used to limit unrolling of main loop.
77 cl->set_nonexact_trip_count();
79 // Loop's test should be part of loop.
80 if (!phase->is_member(this, phase->get_ctrl(cl->loopexit()->in(CountedLoopEndNode::TestValue))))
81 return; // Infinite loop
83 #ifdef ASSERT
84 BoolTest::mask bt = cl->loopexit()->test_trip();
85 assert(bt == BoolTest::lt || bt == BoolTest::gt ||
86 bt == BoolTest::ne, "canonical test is expected");
87 #endif
89 Node* init_n = cl->init_trip();
90 Node* limit_n = cl->limit();
91 if (init_n != NULL && init_n->is_Con() &&
92 limit_n != NULL && limit_n->is_Con()) {
93 // Use longs to avoid integer overflow.
94 int stride_con = cl->stride_con();
95 jlong init_con = cl->init_trip()->get_int();
96 jlong limit_con = cl->limit()->get_int();
97 int stride_m = stride_con - (stride_con > 0 ? 1 : -1);
98 jlong trip_count = (limit_con - init_con + stride_m)/stride_con;
99 if (trip_count > 0 && (julong)trip_count < (julong)max_juint) {
100 // Set exact trip count.
101 cl->set_exact_trip_count((uint)trip_count);
102 }
103 }
104 }
106 //------------------------------compute_profile_trip_cnt----------------------------
107 // Compute loop trip count from profile data as
108 // (backedge_count + loop_exit_count) / loop_exit_count
109 void IdealLoopTree::compute_profile_trip_cnt( PhaseIdealLoop *phase ) {
110 if (!_head->is_CountedLoop()) {
111 return;
112 }
113 CountedLoopNode* head = _head->as_CountedLoop();
114 if (head->profile_trip_cnt() != COUNT_UNKNOWN) {
115 return; // Already computed
116 }
117 float trip_cnt = (float)max_jint; // default is big
119 Node* back = head->in(LoopNode::LoopBackControl);
120 while (back != head) {
121 if ((back->Opcode() == Op_IfTrue || back->Opcode() == Op_IfFalse) &&
122 back->in(0) &&
123 back->in(0)->is_If() &&
124 back->in(0)->as_If()->_fcnt != COUNT_UNKNOWN &&
125 back->in(0)->as_If()->_prob != PROB_UNKNOWN) {
126 break;
127 }
128 back = phase->idom(back);
129 }
130 if (back != head) {
131 assert((back->Opcode() == Op_IfTrue || back->Opcode() == Op_IfFalse) &&
132 back->in(0), "if-projection exists");
133 IfNode* back_if = back->in(0)->as_If();
134 float loop_back_cnt = back_if->_fcnt * back_if->_prob;
136 // Now compute a loop exit count
137 float loop_exit_cnt = 0.0f;
138 for( uint i = 0; i < _body.size(); i++ ) {
139 Node *n = _body[i];
140 if( n->is_If() ) {
141 IfNode *iff = n->as_If();
142 if( iff->_fcnt != COUNT_UNKNOWN && iff->_prob != PROB_UNKNOWN ) {
143 Node *exit = is_loop_exit(iff);
144 if( exit ) {
145 float exit_prob = iff->_prob;
146 if (exit->Opcode() == Op_IfFalse) exit_prob = 1.0 - exit_prob;
147 if (exit_prob > PROB_MIN) {
148 float exit_cnt = iff->_fcnt * exit_prob;
149 loop_exit_cnt += exit_cnt;
150 }
151 }
152 }
153 }
154 }
155 if (loop_exit_cnt > 0.0f) {
156 trip_cnt = (loop_back_cnt + loop_exit_cnt) / loop_exit_cnt;
157 } else {
158 // No exit count so use
159 trip_cnt = loop_back_cnt;
160 }
161 }
162 #ifndef PRODUCT
163 if (TraceProfileTripCount) {
164 tty->print_cr("compute_profile_trip_cnt lp: %d cnt: %f\n", head->_idx, trip_cnt);
165 }
166 #endif
167 head->set_profile_trip_cnt(trip_cnt);
168 }
170 //---------------------is_invariant_addition-----------------------------
171 // Return nonzero index of invariant operand for an Add or Sub
172 // of (nonconstant) invariant and variant values. Helper for reassociate_invariants.
173 int IdealLoopTree::is_invariant_addition(Node* n, PhaseIdealLoop *phase) {
174 int op = n->Opcode();
175 if (op == Op_AddI || op == Op_SubI) {
176 bool in1_invar = this->is_invariant(n->in(1));
177 bool in2_invar = this->is_invariant(n->in(2));
178 if (in1_invar && !in2_invar) return 1;
179 if (!in1_invar && in2_invar) return 2;
180 }
181 return 0;
182 }
184 //---------------------reassociate_add_sub-----------------------------
185 // Reassociate invariant add and subtract expressions:
186 //
187 // inv1 + (x + inv2) => ( inv1 + inv2) + x
188 // (x + inv2) + inv1 => ( inv1 + inv2) + x
189 // inv1 + (x - inv2) => ( inv1 - inv2) + x
190 // inv1 - (inv2 - x) => ( inv1 - inv2) + x
191 // (x + inv2) - inv1 => (-inv1 + inv2) + x
192 // (x - inv2) + inv1 => ( inv1 - inv2) + x
193 // (x - inv2) - inv1 => (-inv1 - inv2) + x
194 // inv1 + (inv2 - x) => ( inv1 + inv2) - x
195 // inv1 - (x - inv2) => ( inv1 + inv2) - x
196 // (inv2 - x) + inv1 => ( inv1 + inv2) - x
197 // (inv2 - x) - inv1 => (-inv1 + inv2) - x
198 // inv1 - (x + inv2) => ( inv1 - inv2) - x
199 //
200 Node* IdealLoopTree::reassociate_add_sub(Node* n1, PhaseIdealLoop *phase) {
201 if (!n1->is_Add() && !n1->is_Sub() || n1->outcnt() == 0) return NULL;
202 if (is_invariant(n1)) return NULL;
203 int inv1_idx = is_invariant_addition(n1, phase);
204 if (!inv1_idx) return NULL;
205 // Don't mess with add of constant (igvn moves them to expression tree root.)
206 if (n1->is_Add() && n1->in(2)->is_Con()) return NULL;
207 Node* inv1 = n1->in(inv1_idx);
208 Node* n2 = n1->in(3 - inv1_idx);
209 int inv2_idx = is_invariant_addition(n2, phase);
210 if (!inv2_idx) return NULL;
211 Node* x = n2->in(3 - inv2_idx);
212 Node* inv2 = n2->in(inv2_idx);
214 bool neg_x = n2->is_Sub() && inv2_idx == 1;
215 bool neg_inv2 = n2->is_Sub() && inv2_idx == 2;
216 bool neg_inv1 = n1->is_Sub() && inv1_idx == 2;
217 if (n1->is_Sub() && inv1_idx == 1) {
218 neg_x = !neg_x;
219 neg_inv2 = !neg_inv2;
220 }
221 Node* inv1_c = phase->get_ctrl(inv1);
222 Node* inv2_c = phase->get_ctrl(inv2);
223 Node* n_inv1;
224 if (neg_inv1) {
225 Node *zero = phase->_igvn.intcon(0);
226 phase->set_ctrl(zero, phase->C->root());
227 n_inv1 = new (phase->C) SubINode(zero, inv1);
228 phase->register_new_node(n_inv1, inv1_c);
229 } else {
230 n_inv1 = inv1;
231 }
232 Node* inv;
233 if (neg_inv2) {
234 inv = new (phase->C) SubINode(n_inv1, inv2);
235 } else {
236 inv = new (phase->C) AddINode(n_inv1, inv2);
237 }
238 phase->register_new_node(inv, phase->get_early_ctrl(inv));
240 Node* addx;
241 if (neg_x) {
242 addx = new (phase->C) SubINode(inv, x);
243 } else {
244 addx = new (phase->C) AddINode(x, inv);
245 }
246 phase->register_new_node(addx, phase->get_ctrl(x));
247 phase->_igvn.replace_node(n1, addx);
248 assert(phase->get_loop(phase->get_ctrl(n1)) == this, "");
249 _body.yank(n1);
250 return addx;
251 }
253 //---------------------reassociate_invariants-----------------------------
254 // Reassociate invariant expressions:
255 void IdealLoopTree::reassociate_invariants(PhaseIdealLoop *phase) {
256 for (int i = _body.size() - 1; i >= 0; i--) {
257 Node *n = _body.at(i);
258 for (int j = 0; j < 5; j++) {
259 Node* nn = reassociate_add_sub(n, phase);
260 if (nn == NULL) break;
261 n = nn; // again
262 };
263 }
264 }
266 //------------------------------policy_peeling---------------------------------
267 // Return TRUE or FALSE if the loop should be peeled or not. Peel if we can
268 // make some loop-invariant test (usually a null-check) happen before the loop.
269 bool IdealLoopTree::policy_peeling( PhaseIdealLoop *phase ) const {
270 Node *test = ((IdealLoopTree*)this)->tail();
271 int body_size = ((IdealLoopTree*)this)->_body.size();
272 // Peeling does loop cloning which can result in O(N^2) node construction
273 if( body_size > 255 /* Prevent overflow for large body_size */
274 || (body_size * body_size + phase->C->live_nodes()) > phase->C->max_node_limit() ) {
275 return false; // too large to safely clone
276 }
277 while( test != _head ) { // Scan till run off top of loop
278 if( test->is_If() ) { // Test?
279 Node *ctrl = phase->get_ctrl(test->in(1));
280 if (ctrl->is_top())
281 return false; // Found dead test on live IF? No peeling!
282 // Standard IF only has one input value to check for loop invariance
283 assert( test->Opcode() == Op_If || test->Opcode() == Op_CountedLoopEnd, "Check this code when new subtype is added");
284 // Condition is not a member of this loop?
285 if( !is_member(phase->get_loop(ctrl)) &&
286 is_loop_exit(test) )
287 return true; // Found reason to peel!
288 }
289 // Walk up dominators to loop _head looking for test which is
290 // executed on every path thru loop.
291 test = phase->idom(test);
292 }
293 return false;
294 }
296 //------------------------------peeled_dom_test_elim---------------------------
297 // If we got the effect of peeling, either by actually peeling or by making
298 // a pre-loop which must execute at least once, we can remove all
299 // loop-invariant dominated tests in the main body.
300 void PhaseIdealLoop::peeled_dom_test_elim( IdealLoopTree *loop, Node_List &old_new ) {
301 bool progress = true;
302 while( progress ) {
303 progress = false; // Reset for next iteration
304 Node *prev = loop->_head->in(LoopNode::LoopBackControl);//loop->tail();
305 Node *test = prev->in(0);
306 while( test != loop->_head ) { // Scan till run off top of loop
308 int p_op = prev->Opcode();
309 if( (p_op == Op_IfFalse || p_op == Op_IfTrue) &&
310 test->is_If() && // Test?
311 !test->in(1)->is_Con() && // And not already obvious?
312 // Condition is not a member of this loop?
313 !loop->is_member(get_loop(get_ctrl(test->in(1))))){
314 // Walk loop body looking for instances of this test
315 for( uint i = 0; i < loop->_body.size(); i++ ) {
316 Node *n = loop->_body.at(i);
317 if( n->is_If() && n->in(1) == test->in(1) /*&& n != loop->tail()->in(0)*/ ) {
318 // IfNode was dominated by version in peeled loop body
319 progress = true;
320 dominated_by( old_new[prev->_idx], n );
321 }
322 }
323 }
324 prev = test;
325 test = idom(test);
326 } // End of scan tests in loop
328 } // End of while( progress )
329 }
331 //------------------------------do_peeling-------------------------------------
332 // Peel the first iteration of the given loop.
333 // Step 1: Clone the loop body. The clone becomes the peeled iteration.
334 // The pre-loop illegally has 2 control users (old & new loops).
335 // Step 2: Make the old-loop fall-in edges point to the peeled iteration.
336 // Do this by making the old-loop fall-in edges act as if they came
337 // around the loopback from the prior iteration (follow the old-loop
338 // backedges) and then map to the new peeled iteration. This leaves
339 // the pre-loop with only 1 user (the new peeled iteration), but the
340 // peeled-loop backedge has 2 users.
341 // Step 3: Cut the backedge on the clone (so its not a loop) and remove the
342 // extra backedge user.
343 //
344 // orig
345 //
346 // stmt1
347 // |
348 // v
349 // loop predicate
350 // |
351 // v
352 // loop<----+
353 // | |
354 // stmt2 |
355 // | |
356 // v |
357 // if ^
358 // / \ |
359 // / \ |
360 // v v |
361 // false true |
362 // / \ |
363 // / ----+
364 // |
365 // v
366 // exit
367 //
368 //
369 // after clone loop
370 //
371 // stmt1
372 // |
373 // v
374 // loop predicate
375 // / \
376 // clone / \ orig
377 // / \
378 // / \
379 // v v
380 // +---->loop clone loop<----+
381 // | | | |
382 // | stmt2 clone stmt2 |
383 // | | | |
384 // | v v |
385 // ^ if clone If ^
386 // | / \ / \ |
387 // | / \ / \ |
388 // | v v v v |
389 // | true false false true |
390 // | / \ / \ |
391 // +---- \ / ----+
392 // \ /
393 // 1v v2
394 // region
395 // |
396 // v
397 // exit
398 //
399 //
400 // after peel and predicate move
401 //
402 // stmt1
403 // /
404 // /
405 // clone / orig
406 // /
407 // / +----------+
408 // / | |
409 // / loop predicate |
410 // / | |
411 // v v |
412 // TOP-->loop clone loop<----+ |
413 // | | | |
414 // stmt2 clone stmt2 | |
415 // | | | ^
416 // v v | |
417 // if clone If ^ |
418 // / \ / \ | |
419 // / \ / \ | |
420 // v v v v | |
421 // true false false true | |
422 // | \ / \ | |
423 // | \ / ----+ ^
424 // | \ / |
425 // | 1v v2 |
426 // v region |
427 // | | |
428 // | v |
429 // | exit |
430 // | |
431 // +--------------->-----------------+
432 //
433 //
434 // final graph
435 //
436 // stmt1
437 // |
438 // v
439 // stmt2 clone
440 // |
441 // v
442 // if clone
443 // / |
444 // / |
445 // v v
446 // false true
447 // | |
448 // | v
449 // | loop predicate
450 // | |
451 // | v
452 // | loop<----+
453 // | | |
454 // | stmt2 |
455 // | | |
456 // | v |
457 // v if ^
458 // | / \ |
459 // | / \ |
460 // | v v |
461 // | false true |
462 // | | \ |
463 // v v --+
464 // region
465 // |
466 // v
467 // exit
468 //
469 void PhaseIdealLoop::do_peeling( IdealLoopTree *loop, Node_List &old_new ) {
471 C->set_major_progress();
472 // Peeling a 'main' loop in a pre/main/post situation obfuscates the
473 // 'pre' loop from the main and the 'pre' can no longer have it's
474 // iterations adjusted. Therefore, we need to declare this loop as
475 // no longer a 'main' loop; it will need new pre and post loops before
476 // we can do further RCE.
477 #ifndef PRODUCT
478 if (TraceLoopOpts) {
479 tty->print("Peel ");
480 loop->dump_head();
481 }
482 #endif
483 Node* head = loop->_head;
484 bool counted_loop = head->is_CountedLoop();
485 if (counted_loop) {
486 CountedLoopNode *cl = head->as_CountedLoop();
487 assert(cl->trip_count() > 0, "peeling a fully unrolled loop");
488 cl->set_trip_count(cl->trip_count() - 1);
489 if (cl->is_main_loop()) {
490 cl->set_normal_loop();
491 #ifndef PRODUCT
492 if (PrintOpto && VerifyLoopOptimizations) {
493 tty->print("Peeling a 'main' loop; resetting to 'normal' ");
494 loop->dump_head();
495 }
496 #endif
497 }
498 }
499 Node* entry = head->in(LoopNode::EntryControl);
501 // Step 1: Clone the loop body. The clone becomes the peeled iteration.
502 // The pre-loop illegally has 2 control users (old & new loops).
503 clone_loop( loop, old_new, dom_depth(head) );
505 // Step 2: Make the old-loop fall-in edges point to the peeled iteration.
506 // Do this by making the old-loop fall-in edges act as if they came
507 // around the loopback from the prior iteration (follow the old-loop
508 // backedges) and then map to the new peeled iteration. This leaves
509 // the pre-loop with only 1 user (the new peeled iteration), but the
510 // peeled-loop backedge has 2 users.
511 Node* new_entry = old_new[head->in(LoopNode::LoopBackControl)->_idx];
512 _igvn.hash_delete(head);
513 head->set_req(LoopNode::EntryControl, new_entry);
514 for (DUIterator_Fast jmax, j = head->fast_outs(jmax); j < jmax; j++) {
515 Node* old = head->fast_out(j);
516 if (old->in(0) == loop->_head && old->req() == 3 && old->is_Phi()) {
517 Node* new_exit_value = old_new[old->in(LoopNode::LoopBackControl)->_idx];
518 if (!new_exit_value ) // Backedge value is ALSO loop invariant?
519 // Then loop body backedge value remains the same.
520 new_exit_value = old->in(LoopNode::LoopBackControl);
521 _igvn.hash_delete(old);
522 old->set_req(LoopNode::EntryControl, new_exit_value);
523 }
524 }
527 // Step 3: Cut the backedge on the clone (so its not a loop) and remove the
528 // extra backedge user.
529 Node* new_head = old_new[head->_idx];
530 _igvn.hash_delete(new_head);
531 new_head->set_req(LoopNode::LoopBackControl, C->top());
532 for (DUIterator_Fast j2max, j2 = new_head->fast_outs(j2max); j2 < j2max; j2++) {
533 Node* use = new_head->fast_out(j2);
534 if (use->in(0) == new_head && use->req() == 3 && use->is_Phi()) {
535 _igvn.hash_delete(use);
536 use->set_req(LoopNode::LoopBackControl, C->top());
537 }
538 }
541 // Step 4: Correct dom-depth info. Set to loop-head depth.
542 int dd = dom_depth(head);
543 set_idom(head, head->in(1), dd);
544 for (uint j3 = 0; j3 < loop->_body.size(); j3++) {
545 Node *old = loop->_body.at(j3);
546 Node *nnn = old_new[old->_idx];
547 if (!has_ctrl(nnn))
548 set_idom(nnn, idom(nnn), dd-1);
549 }
551 // Now force out all loop-invariant dominating tests. The optimizer
552 // finds some, but we _know_ they are all useless.
553 peeled_dom_test_elim(loop,old_new);
555 loop->record_for_igvn();
556 }
558 #define EMPTY_LOOP_SIZE 7 // number of nodes in an empty loop
560 //------------------------------policy_maximally_unroll------------------------
561 // Calculate exact loop trip count and return true if loop can be maximally
562 // unrolled.
563 bool IdealLoopTree::policy_maximally_unroll( PhaseIdealLoop *phase ) const {
564 CountedLoopNode *cl = _head->as_CountedLoop();
565 assert(cl->is_normal_loop(), "");
566 if (!cl->is_valid_counted_loop())
567 return false; // Malformed counted loop
569 if (!cl->has_exact_trip_count()) {
570 // Trip count is not exact.
571 return false;
572 }
574 uint trip_count = cl->trip_count();
575 // Note, max_juint is used to indicate unknown trip count.
576 assert(trip_count > 1, "one iteration loop should be optimized out already");
577 assert(trip_count < max_juint, "exact trip_count should be less than max_uint.");
579 // Real policy: if we maximally unroll, does it get too big?
580 // Allow the unrolled mess to get larger than standard loop
581 // size. After all, it will no longer be a loop.
582 uint body_size = _body.size();
583 uint unroll_limit = (uint)LoopUnrollLimit * 4;
584 assert( (intx)unroll_limit == LoopUnrollLimit * 4, "LoopUnrollLimit must fit in 32bits");
585 if (trip_count > unroll_limit || body_size > unroll_limit) {
586 return false;
587 }
589 // Fully unroll a loop with few iterations regardless next
590 // conditions since following loop optimizations will split
591 // such loop anyway (pre-main-post).
592 if (trip_count <= 3)
593 return true;
595 // Take into account that after unroll conjoined heads and tails will fold,
596 // otherwise policy_unroll() may allow more unrolling than max unrolling.
597 uint new_body_size = EMPTY_LOOP_SIZE + (body_size - EMPTY_LOOP_SIZE) * trip_count;
598 uint tst_body_size = (new_body_size - EMPTY_LOOP_SIZE) / trip_count + EMPTY_LOOP_SIZE;
599 if (body_size != tst_body_size) // Check for int overflow
600 return false;
601 if (new_body_size > unroll_limit ||
602 // Unrolling can result in a large amount of node construction
603 new_body_size >= phase->C->max_node_limit() - phase->C->live_nodes()) {
604 return false;
605 }
607 // Do not unroll a loop with String intrinsics code.
608 // String intrinsics are large and have loops.
609 for (uint k = 0; k < _body.size(); k++) {
610 Node* n = _body.at(k);
611 switch (n->Opcode()) {
612 case Op_StrComp:
613 case Op_StrEquals:
614 case Op_StrIndexOf:
615 case Op_EncodeISOArray:
616 case Op_AryEq: {
617 return false;
618 }
619 #if INCLUDE_RTM_OPT
620 case Op_FastLock:
621 case Op_FastUnlock: {
622 // Don't unroll RTM locking code because it is large.
623 if (UseRTMLocking) {
624 return false;
625 }
626 }
627 #endif
628 } // switch
629 }
631 return true; // Do maximally unroll
632 }
635 //------------------------------policy_unroll----------------------------------
636 // Return TRUE or FALSE if the loop should be unrolled or not. Unroll if
637 // the loop is a CountedLoop and the body is small enough.
638 bool IdealLoopTree::policy_unroll( PhaseIdealLoop *phase ) const {
640 CountedLoopNode *cl = _head->as_CountedLoop();
641 assert(cl->is_normal_loop() || cl->is_main_loop(), "");
643 if (!cl->is_valid_counted_loop())
644 return false; // Malformed counted loop
646 // Protect against over-unrolling.
647 // After split at least one iteration will be executed in pre-loop.
648 if (cl->trip_count() <= (uint)(cl->is_normal_loop() ? 2 : 1)) return false;
650 int future_unroll_ct = cl->unrolled_count() * 2;
651 if (future_unroll_ct > LoopMaxUnroll) return false;
653 // Check for initial stride being a small enough constant
654 if (abs(cl->stride_con()) > (1<<2)*future_unroll_ct) return false;
656 // Don't unroll if the next round of unrolling would push us
657 // over the expected trip count of the loop. One is subtracted
658 // from the expected trip count because the pre-loop normally
659 // executes 1 iteration.
660 if (UnrollLimitForProfileCheck > 0 &&
661 cl->profile_trip_cnt() != COUNT_UNKNOWN &&
662 future_unroll_ct > UnrollLimitForProfileCheck &&
663 (float)future_unroll_ct > cl->profile_trip_cnt() - 1.0) {
664 return false;
665 }
667 // When unroll count is greater than LoopUnrollMin, don't unroll if:
668 // the residual iterations are more than 10% of the trip count
669 // and rounds of "unroll,optimize" are not making significant progress
670 // Progress defined as current size less than 20% larger than previous size.
671 if (UseSuperWord && cl->node_count_before_unroll() > 0 &&
672 future_unroll_ct > LoopUnrollMin &&
673 (future_unroll_ct - 1) * 10.0 > cl->profile_trip_cnt() &&
674 1.2 * cl->node_count_before_unroll() < (double)_body.size()) {
675 return false;
676 }
678 Node *init_n = cl->init_trip();
679 Node *limit_n = cl->limit();
680 int stride_con = cl->stride_con();
681 // Non-constant bounds.
682 // Protect against over-unrolling when init or/and limit are not constant
683 // (so that trip_count's init value is maxint) but iv range is known.
684 if (init_n == NULL || !init_n->is_Con() ||
685 limit_n == NULL || !limit_n->is_Con()) {
686 Node* phi = cl->phi();
687 if (phi != NULL) {
688 assert(phi->is_Phi() && phi->in(0) == _head, "Counted loop should have iv phi.");
689 const TypeInt* iv_type = phase->_igvn.type(phi)->is_int();
690 int next_stride = stride_con * 2; // stride after this unroll
691 if (next_stride > 0) {
692 if (iv_type->_lo + next_stride <= iv_type->_lo || // overflow
693 iv_type->_lo + next_stride > iv_type->_hi) {
694 return false; // over-unrolling
695 }
696 } else if (next_stride < 0) {
697 if (iv_type->_hi + next_stride >= iv_type->_hi || // overflow
698 iv_type->_hi + next_stride < iv_type->_lo) {
699 return false; // over-unrolling
700 }
701 }
702 }
703 }
705 // After unroll limit will be adjusted: new_limit = limit-stride.
706 // Bailout if adjustment overflow.
707 const TypeInt* limit_type = phase->_igvn.type(limit_n)->is_int();
708 if (stride_con > 0 && ((limit_type->_hi - stride_con) >= limit_type->_hi) ||
709 stride_con < 0 && ((limit_type->_lo - stride_con) <= limit_type->_lo))
710 return false; // overflow
712 // Adjust body_size to determine if we unroll or not
713 uint body_size = _body.size();
714 // Key test to unroll loop in CRC32 java code
715 int xors_in_loop = 0;
716 // Also count ModL, DivL and MulL which expand mightly
717 for (uint k = 0; k < _body.size(); k++) {
718 Node* n = _body.at(k);
719 switch (n->Opcode()) {
720 case Op_XorI: xors_in_loop++; break; // CRC32 java code
721 case Op_ModL: body_size += 30; break;
722 case Op_DivL: body_size += 30; break;
723 case Op_MulL: body_size += 10; break;
724 case Op_StrComp:
725 case Op_StrEquals:
726 case Op_StrIndexOf:
727 case Op_EncodeISOArray:
728 case Op_AryEq: {
729 // Do not unroll a loop with String intrinsics code.
730 // String intrinsics are large and have loops.
731 return false;
732 }
733 #if INCLUDE_RTM_OPT
734 case Op_FastLock:
735 case Op_FastUnlock: {
736 // Don't unroll RTM locking code because it is large.
737 if (UseRTMLocking) {
738 return false;
739 }
740 }
741 #endif
742 } // switch
743 }
745 // Check for being too big
746 if (body_size > (uint)LoopUnrollLimit) {
747 if (xors_in_loop >= 4 && body_size < (uint)LoopUnrollLimit*4) return true;
748 // Normal case: loop too big
749 return false;
750 }
752 // Unroll once! (Each trip will soon do double iterations)
753 return true;
754 }
756 //------------------------------policy_align-----------------------------------
757 // Return TRUE or FALSE if the loop should be cache-line aligned. Gather the
758 // expression that does the alignment. Note that only one array base can be
759 // aligned in a loop (unless the VM guarantees mutual alignment). Note that
760 // if we vectorize short memory ops into longer memory ops, we may want to
761 // increase alignment.
762 bool IdealLoopTree::policy_align( PhaseIdealLoop *phase ) const {
763 return false;
764 }
766 //------------------------------policy_range_check-----------------------------
767 // Return TRUE or FALSE if the loop should be range-check-eliminated.
768 // Actually we do iteration-splitting, a more powerful form of RCE.
769 bool IdealLoopTree::policy_range_check( PhaseIdealLoop *phase ) const {
770 if (!RangeCheckElimination) return false;
772 CountedLoopNode *cl = _head->as_CountedLoop();
773 // If we unrolled with no intention of doing RCE and we later
774 // changed our minds, we got no pre-loop. Either we need to
775 // make a new pre-loop, or we gotta disallow RCE.
776 if (cl->is_main_no_pre_loop()) return false; // Disallowed for now.
777 Node *trip_counter = cl->phi();
779 // Check loop body for tests of trip-counter plus loop-invariant vs
780 // loop-invariant.
781 for (uint i = 0; i < _body.size(); i++) {
782 Node *iff = _body[i];
783 if (iff->Opcode() == Op_If) { // Test?
785 // Comparing trip+off vs limit
786 Node *bol = iff->in(1);
787 if (bol->req() != 2) continue; // dead constant test
788 if (!bol->is_Bool()) {
789 assert(UseLoopPredicate && bol->Opcode() == Op_Conv2B, "predicate check only");
790 continue;
791 }
792 if (bol->as_Bool()->_test._test == BoolTest::ne)
793 continue; // not RC
795 Node *cmp = bol->in(1);
796 Node *rc_exp = cmp->in(1);
797 Node *limit = cmp->in(2);
799 Node *limit_c = phase->get_ctrl(limit);
800 if( limit_c == phase->C->top() )
801 return false; // Found dead test on live IF? No RCE!
802 if( is_member(phase->get_loop(limit_c) ) ) {
803 // Compare might have operands swapped; commute them
804 rc_exp = cmp->in(2);
805 limit = cmp->in(1);
806 limit_c = phase->get_ctrl(limit);
807 if( is_member(phase->get_loop(limit_c) ) )
808 continue; // Both inputs are loop varying; cannot RCE
809 }
811 if (!phase->is_scaled_iv_plus_offset(rc_exp, trip_counter, NULL, NULL)) {
812 continue;
813 }
814 // Yeah! Found a test like 'trip+off vs limit'
815 // Test is an IfNode, has 2 projections. If BOTH are in the loop
816 // we need loop unswitching instead of iteration splitting.
817 if( is_loop_exit(iff) )
818 return true; // Found reason to split iterations
819 } // End of is IF
820 }
822 return false;
823 }
825 //------------------------------policy_peel_only-------------------------------
826 // Return TRUE or FALSE if the loop should NEVER be RCE'd or aligned. Useful
827 // for unrolling loops with NO array accesses.
828 bool IdealLoopTree::policy_peel_only( PhaseIdealLoop *phase ) const {
830 for( uint i = 0; i < _body.size(); i++ )
831 if( _body[i]->is_Mem() )
832 return false;
834 // No memory accesses at all!
835 return true;
836 }
838 //------------------------------clone_up_backedge_goo--------------------------
839 // If Node n lives in the back_ctrl block and cannot float, we clone a private
840 // version of n in preheader_ctrl block and return that, otherwise return n.
841 Node *PhaseIdealLoop::clone_up_backedge_goo( Node *back_ctrl, Node *preheader_ctrl, Node *n, VectorSet &visited, Node_Stack &clones ) {
842 if( get_ctrl(n) != back_ctrl ) return n;
844 // Only visit once
845 if (visited.test_set(n->_idx)) {
846 Node *x = clones.find(n->_idx);
847 if (x != NULL)
848 return x;
849 return n;
850 }
852 Node *x = NULL; // If required, a clone of 'n'
853 // Check for 'n' being pinned in the backedge.
854 if( n->in(0) && n->in(0) == back_ctrl ) {
855 assert(clones.find(n->_idx) == NULL, "dead loop");
856 x = n->clone(); // Clone a copy of 'n' to preheader
857 clones.push(x, n->_idx);
858 x->set_req( 0, preheader_ctrl ); // Fix x's control input to preheader
859 }
861 // Recursive fixup any other input edges into x.
862 // If there are no changes we can just return 'n', otherwise
863 // we need to clone a private copy and change it.
864 for( uint i = 1; i < n->req(); i++ ) {
865 Node *g = clone_up_backedge_goo( back_ctrl, preheader_ctrl, n->in(i), visited, clones );
866 if( g != n->in(i) ) {
867 if( !x ) {
868 assert(clones.find(n->_idx) == NULL, "dead loop");
869 x = n->clone();
870 clones.push(x, n->_idx);
871 }
872 x->set_req(i, g);
873 }
874 }
875 if( x ) { // x can legally float to pre-header location
876 register_new_node( x, preheader_ctrl );
877 return x;
878 } else { // raise n to cover LCA of uses
879 set_ctrl( n, find_non_split_ctrl(back_ctrl->in(0)) );
880 }
881 return n;
882 }
884 bool PhaseIdealLoop::cast_incr_before_loop(Node* incr, Node* ctrl, Node* loop) {
885 Node* castii = new (C) CastIINode(incr, TypeInt::INT, true);
886 castii->set_req(0, ctrl);
887 register_new_node(castii, ctrl);
888 for (DUIterator_Fast imax, i = incr->fast_outs(imax); i < imax; i++) {
889 Node* n = incr->fast_out(i);
890 if (n->is_Phi() && n->in(0) == loop) {
891 int nrep = n->replace_edge(incr, castii);
892 return true;
893 }
894 }
895 return false;
896 }
898 //------------------------------insert_pre_post_loops--------------------------
899 // Insert pre and post loops. If peel_only is set, the pre-loop can not have
900 // more iterations added. It acts as a 'peel' only, no lower-bound RCE, no
901 // alignment. Useful to unroll loops that do no array accesses.
902 void PhaseIdealLoop::insert_pre_post_loops( IdealLoopTree *loop, Node_List &old_new, bool peel_only ) {
904 #ifndef PRODUCT
905 if (TraceLoopOpts) {
906 if (peel_only)
907 tty->print("PeelMainPost ");
908 else
909 tty->print("PreMainPost ");
910 loop->dump_head();
911 }
912 #endif
913 C->set_major_progress();
915 // Find common pieces of the loop being guarded with pre & post loops
916 CountedLoopNode *main_head = loop->_head->as_CountedLoop();
917 assert( main_head->is_normal_loop(), "" );
918 CountedLoopEndNode *main_end = main_head->loopexit();
919 guarantee(main_end != NULL, "no loop exit node");
920 assert( main_end->outcnt() == 2, "1 true, 1 false path only" );
921 uint dd_main_head = dom_depth(main_head);
922 uint max = main_head->outcnt();
924 Node *pre_header= main_head->in(LoopNode::EntryControl);
925 Node *init = main_head->init_trip();
926 Node *incr = main_end ->incr();
927 Node *limit = main_end ->limit();
928 Node *stride = main_end ->stride();
929 Node *cmp = main_end ->cmp_node();
930 BoolTest::mask b_test = main_end->test_trip();
932 // Need only 1 user of 'bol' because I will be hacking the loop bounds.
933 Node *bol = main_end->in(CountedLoopEndNode::TestValue);
934 if( bol->outcnt() != 1 ) {
935 bol = bol->clone();
936 register_new_node(bol,main_end->in(CountedLoopEndNode::TestControl));
937 _igvn.hash_delete(main_end);
938 main_end->set_req(CountedLoopEndNode::TestValue, bol);
939 }
940 // Need only 1 user of 'cmp' because I will be hacking the loop bounds.
941 if( cmp->outcnt() != 1 ) {
942 cmp = cmp->clone();
943 register_new_node(cmp,main_end->in(CountedLoopEndNode::TestControl));
944 _igvn.hash_delete(bol);
945 bol->set_req(1, cmp);
946 }
948 //------------------------------
949 // Step A: Create Post-Loop.
950 Node* main_exit = main_end->proj_out(false);
951 assert( main_exit->Opcode() == Op_IfFalse, "" );
952 int dd_main_exit = dom_depth(main_exit);
954 // Step A1: Clone the loop body. The clone becomes the post-loop. The main
955 // loop pre-header illegally has 2 control users (old & new loops).
956 clone_loop( loop, old_new, dd_main_exit );
957 assert( old_new[main_end ->_idx]->Opcode() == Op_CountedLoopEnd, "" );
958 CountedLoopNode *post_head = old_new[main_head->_idx]->as_CountedLoop();
959 post_head->set_post_loop(main_head);
961 // Reduce the post-loop trip count.
962 CountedLoopEndNode* post_end = old_new[main_end ->_idx]->as_CountedLoopEnd();
963 post_end->_prob = PROB_FAIR;
965 // Build the main-loop normal exit.
966 IfFalseNode *new_main_exit = new (C) IfFalseNode(main_end);
967 _igvn.register_new_node_with_optimizer( new_main_exit );
968 set_idom(new_main_exit, main_end, dd_main_exit );
969 set_loop(new_main_exit, loop->_parent);
971 // Step A2: Build a zero-trip guard for the post-loop. After leaving the
972 // main-loop, the post-loop may not execute at all. We 'opaque' the incr
973 // (the main-loop trip-counter exit value) because we will be changing
974 // the exit value (via unrolling) so we cannot constant-fold away the zero
975 // trip guard until all unrolling is done.
976 Node *zer_opaq = new (C) Opaque1Node(C, incr);
977 Node *zer_cmp = new (C) CmpINode( zer_opaq, limit );
978 Node *zer_bol = new (C) BoolNode( zer_cmp, b_test );
979 register_new_node( zer_opaq, new_main_exit );
980 register_new_node( zer_cmp , new_main_exit );
981 register_new_node( zer_bol , new_main_exit );
983 // Build the IfNode
984 IfNode *zer_iff = new (C) IfNode( new_main_exit, zer_bol, PROB_FAIR, COUNT_UNKNOWN );
985 _igvn.register_new_node_with_optimizer( zer_iff );
986 set_idom(zer_iff, new_main_exit, dd_main_exit);
987 set_loop(zer_iff, loop->_parent);
989 // Plug in the false-path, taken if we need to skip post-loop
990 _igvn.replace_input_of(main_exit, 0, zer_iff);
991 set_idom(main_exit, zer_iff, dd_main_exit);
992 set_idom(main_exit->unique_out(), zer_iff, dd_main_exit);
993 // Make the true-path, must enter the post loop
994 Node *zer_taken = new (C) IfTrueNode( zer_iff );
995 _igvn.register_new_node_with_optimizer( zer_taken );
996 set_idom(zer_taken, zer_iff, dd_main_exit);
997 set_loop(zer_taken, loop->_parent);
998 // Plug in the true path
999 _igvn.hash_delete( post_head );
1000 post_head->set_req(LoopNode::EntryControl, zer_taken);
1001 set_idom(post_head, zer_taken, dd_main_exit);
1003 Arena *a = Thread::current()->resource_area();
1004 VectorSet visited(a);
1005 Node_Stack clones(a, main_head->back_control()->outcnt());
1006 // Step A3: Make the fall-in values to the post-loop come from the
1007 // fall-out values of the main-loop.
1008 for (DUIterator_Fast imax, i = main_head->fast_outs(imax); i < imax; i++) {
1009 Node* main_phi = main_head->fast_out(i);
1010 if( main_phi->is_Phi() && main_phi->in(0) == main_head && main_phi->outcnt() >0 ) {
1011 Node *post_phi = old_new[main_phi->_idx];
1012 Node *fallmain = clone_up_backedge_goo(main_head->back_control(),
1013 post_head->init_control(),
1014 main_phi->in(LoopNode::LoopBackControl),
1015 visited, clones);
1016 _igvn.hash_delete(post_phi);
1017 post_phi->set_req( LoopNode::EntryControl, fallmain );
1018 }
1019 }
1021 // Update local caches for next stanza
1022 main_exit = new_main_exit;
1025 //------------------------------
1026 // Step B: Create Pre-Loop.
1028 // Step B1: Clone the loop body. The clone becomes the pre-loop. The main
1029 // loop pre-header illegally has 2 control users (old & new loops).
1030 clone_loop( loop, old_new, dd_main_head );
1031 CountedLoopNode* pre_head = old_new[main_head->_idx]->as_CountedLoop();
1032 CountedLoopEndNode* pre_end = old_new[main_end ->_idx]->as_CountedLoopEnd();
1033 pre_head->set_pre_loop(main_head);
1034 Node *pre_incr = old_new[incr->_idx];
1036 // Reduce the pre-loop trip count.
1037 pre_end->_prob = PROB_FAIR;
1039 // Find the pre-loop normal exit.
1040 Node* pre_exit = pre_end->proj_out(false);
1041 assert( pre_exit->Opcode() == Op_IfFalse, "" );
1042 IfFalseNode *new_pre_exit = new (C) IfFalseNode(pre_end);
1043 _igvn.register_new_node_with_optimizer( new_pre_exit );
1044 set_idom(new_pre_exit, pre_end, dd_main_head);
1045 set_loop(new_pre_exit, loop->_parent);
1047 // Step B2: Build a zero-trip guard for the main-loop. After leaving the
1048 // pre-loop, the main-loop may not execute at all. Later in life this
1049 // zero-trip guard will become the minimum-trip guard when we unroll
1050 // the main-loop.
1051 Node *min_opaq = new (C) Opaque1Node(C, limit);
1052 Node *min_cmp = new (C) CmpINode( pre_incr, min_opaq );
1053 Node *min_bol = new (C) BoolNode( min_cmp, b_test );
1054 register_new_node( min_opaq, new_pre_exit );
1055 register_new_node( min_cmp , new_pre_exit );
1056 register_new_node( min_bol , new_pre_exit );
1058 // Build the IfNode (assume the main-loop is executed always).
1059 IfNode *min_iff = new (C) IfNode( new_pre_exit, min_bol, PROB_ALWAYS, COUNT_UNKNOWN );
1060 _igvn.register_new_node_with_optimizer( min_iff );
1061 set_idom(min_iff, new_pre_exit, dd_main_head);
1062 set_loop(min_iff, loop->_parent);
1064 // Plug in the false-path, taken if we need to skip main-loop
1065 _igvn.hash_delete( pre_exit );
1066 pre_exit->set_req(0, min_iff);
1067 set_idom(pre_exit, min_iff, dd_main_head);
1068 set_idom(pre_exit->unique_out(), min_iff, dd_main_head);
1069 // Make the true-path, must enter the main loop
1070 Node *min_taken = new (C) IfTrueNode( min_iff );
1071 _igvn.register_new_node_with_optimizer( min_taken );
1072 set_idom(min_taken, min_iff, dd_main_head);
1073 set_loop(min_taken, loop->_parent);
1074 // Plug in the true path
1075 _igvn.hash_delete( main_head );
1076 main_head->set_req(LoopNode::EntryControl, min_taken);
1077 set_idom(main_head, min_taken, dd_main_head);
1079 visited.Clear();
1080 clones.clear();
1081 // Step B3: Make the fall-in values to the main-loop come from the
1082 // fall-out values of the pre-loop.
1083 for (DUIterator_Fast i2max, i2 = main_head->fast_outs(i2max); i2 < i2max; i2++) {
1084 Node* main_phi = main_head->fast_out(i2);
1085 if( main_phi->is_Phi() && main_phi->in(0) == main_head && main_phi->outcnt() > 0 ) {
1086 Node *pre_phi = old_new[main_phi->_idx];
1087 Node *fallpre = clone_up_backedge_goo(pre_head->back_control(),
1088 main_head->init_control(),
1089 pre_phi->in(LoopNode::LoopBackControl),
1090 visited, clones);
1091 _igvn.hash_delete(main_phi);
1092 main_phi->set_req( LoopNode::EntryControl, fallpre );
1093 }
1094 }
1096 // Nodes inside the loop may be control dependent on a predicate
1097 // that was moved before the preloop. If the back branch of the main
1098 // or post loops becomes dead, those nodes won't be dependent on the
1099 // test that guards that loop nest anymore which could lead to an
1100 // incorrect array access because it executes independently of the
1101 // test that was guarding the loop nest. We add a special CastII on
1102 // the if branch that enters the loop, between the input induction
1103 // variable value and the induction variable Phi to preserve correct
1104 // dependencies.
1106 // CastII for the post loop:
1107 bool inserted = cast_incr_before_loop(zer_opaq->in(1), zer_taken, post_head);
1108 assert(inserted, "no castII inserted");
1110 // CastII for the main loop:
1111 inserted = cast_incr_before_loop(pre_incr, min_taken, main_head);
1112 assert(inserted, "no castII inserted");
1114 // Step B4: Shorten the pre-loop to run only 1 iteration (for now).
1115 // RCE and alignment may change this later.
1116 Node *cmp_end = pre_end->cmp_node();
1117 assert( cmp_end->in(2) == limit, "" );
1118 Node *pre_limit = new (C) AddINode( init, stride );
1120 // Save the original loop limit in this Opaque1 node for
1121 // use by range check elimination.
1122 Node *pre_opaq = new (C) Opaque1Node(C, pre_limit, limit);
1124 register_new_node( pre_limit, pre_head->in(0) );
1125 register_new_node( pre_opaq , pre_head->in(0) );
1127 // Since no other users of pre-loop compare, I can hack limit directly
1128 assert( cmp_end->outcnt() == 1, "no other users" );
1129 _igvn.hash_delete(cmp_end);
1130 cmp_end->set_req(2, peel_only ? pre_limit : pre_opaq);
1132 // Special case for not-equal loop bounds:
1133 // Change pre loop test, main loop test, and the
1134 // main loop guard test to use lt or gt depending on stride
1135 // direction:
1136 // positive stride use <
1137 // negative stride use >
1138 //
1139 // not-equal test is kept for post loop to handle case
1140 // when init > limit when stride > 0 (and reverse).
1142 if (pre_end->in(CountedLoopEndNode::TestValue)->as_Bool()->_test._test == BoolTest::ne) {
1144 BoolTest::mask new_test = (main_end->stride_con() > 0) ? BoolTest::lt : BoolTest::gt;
1145 // Modify pre loop end condition
1146 Node* pre_bol = pre_end->in(CountedLoopEndNode::TestValue)->as_Bool();
1147 BoolNode* new_bol0 = new (C) BoolNode(pre_bol->in(1), new_test);
1148 register_new_node( new_bol0, pre_head->in(0) );
1149 _igvn.hash_delete(pre_end);
1150 pre_end->set_req(CountedLoopEndNode::TestValue, new_bol0);
1151 // Modify main loop guard condition
1152 assert(min_iff->in(CountedLoopEndNode::TestValue) == min_bol, "guard okay");
1153 BoolNode* new_bol1 = new (C) BoolNode(min_bol->in(1), new_test);
1154 register_new_node( new_bol1, new_pre_exit );
1155 _igvn.hash_delete(min_iff);
1156 min_iff->set_req(CountedLoopEndNode::TestValue, new_bol1);
1157 // Modify main loop end condition
1158 BoolNode* main_bol = main_end->in(CountedLoopEndNode::TestValue)->as_Bool();
1159 BoolNode* new_bol2 = new (C) BoolNode(main_bol->in(1), new_test);
1160 register_new_node( new_bol2, main_end->in(CountedLoopEndNode::TestControl) );
1161 _igvn.hash_delete(main_end);
1162 main_end->set_req(CountedLoopEndNode::TestValue, new_bol2);
1163 }
1165 // Flag main loop
1166 main_head->set_main_loop();
1167 if( peel_only ) main_head->set_main_no_pre_loop();
1169 // Subtract a trip count for the pre-loop.
1170 main_head->set_trip_count(main_head->trip_count() - 1);
1172 // It's difficult to be precise about the trip-counts
1173 // for the pre/post loops. They are usually very short,
1174 // so guess that 4 trips is a reasonable value.
1175 post_head->set_profile_trip_cnt(4.0);
1176 pre_head->set_profile_trip_cnt(4.0);
1178 // Now force out all loop-invariant dominating tests. The optimizer
1179 // finds some, but we _know_ they are all useless.
1180 peeled_dom_test_elim(loop,old_new);
1181 loop->record_for_igvn();
1182 }
1184 //------------------------------is_invariant-----------------------------
1185 // Return true if n is invariant
1186 bool IdealLoopTree::is_invariant(Node* n) const {
1187 Node *n_c = _phase->has_ctrl(n) ? _phase->get_ctrl(n) : n;
1188 if (n_c->is_top()) return false;
1189 return !is_member(_phase->get_loop(n_c));
1190 }
1193 //------------------------------do_unroll--------------------------------------
1194 // Unroll the loop body one step - make each trip do 2 iterations.
1195 void PhaseIdealLoop::do_unroll( IdealLoopTree *loop, Node_List &old_new, bool adjust_min_trip ) {
1196 assert(LoopUnrollLimit, "");
1197 CountedLoopNode *loop_head = loop->_head->as_CountedLoop();
1198 CountedLoopEndNode *loop_end = loop_head->loopexit();
1199 assert(loop_end, "");
1200 #ifndef PRODUCT
1201 if (PrintOpto && VerifyLoopOptimizations) {
1202 tty->print("Unrolling ");
1203 loop->dump_head();
1204 } else if (TraceLoopOpts) {
1205 if (loop_head->trip_count() < (uint)LoopUnrollLimit) {
1206 tty->print("Unroll %d(%2d) ", loop_head->unrolled_count()*2, loop_head->trip_count());
1207 } else {
1208 tty->print("Unroll %d ", loop_head->unrolled_count()*2);
1209 }
1210 loop->dump_head();
1211 }
1212 #endif
1214 // Remember loop node count before unrolling to detect
1215 // if rounds of unroll,optimize are making progress
1216 loop_head->set_node_count_before_unroll(loop->_body.size());
1218 Node *ctrl = loop_head->in(LoopNode::EntryControl);
1219 Node *limit = loop_head->limit();
1220 Node *init = loop_head->init_trip();
1221 Node *stride = loop_head->stride();
1223 Node *opaq = NULL;
1224 if (adjust_min_trip) { // If not maximally unrolling, need adjustment
1225 // Search for zero-trip guard.
1226 assert( loop_head->is_main_loop(), "" );
1227 assert( ctrl->Opcode() == Op_IfTrue || ctrl->Opcode() == Op_IfFalse, "" );
1228 Node *iff = ctrl->in(0);
1229 assert( iff->Opcode() == Op_If, "" );
1230 Node *bol = iff->in(1);
1231 assert( bol->Opcode() == Op_Bool, "" );
1232 Node *cmp = bol->in(1);
1233 assert( cmp->Opcode() == Op_CmpI, "" );
1234 opaq = cmp->in(2);
1235 // Occasionally it's possible for a zero-trip guard Opaque1 node to be
1236 // optimized away and then another round of loop opts attempted.
1237 // We can not optimize this particular loop in that case.
1238 if (opaq->Opcode() != Op_Opaque1)
1239 return; // Cannot find zero-trip guard! Bail out!
1240 // Zero-trip test uses an 'opaque' node which is not shared.
1241 assert(opaq->outcnt() == 1 && opaq->in(1) == limit, "");
1242 }
1244 C->set_major_progress();
1246 Node* new_limit = NULL;
1247 if (UnrollLimitCheck) {
1248 int stride_con = stride->get_int();
1249 int stride_p = (stride_con > 0) ? stride_con : -stride_con;
1250 uint old_trip_count = loop_head->trip_count();
1251 // Verify that unroll policy result is still valid.
1252 assert(old_trip_count > 1 &&
1253 (!adjust_min_trip || stride_p <= (1<<3)*loop_head->unrolled_count()), "sanity");
1255 // Adjust loop limit to keep valid iterations number after unroll.
1256 // Use (limit - stride) instead of (((limit - init)/stride) & (-2))*stride
1257 // which may overflow.
1258 if (!adjust_min_trip) {
1259 assert(old_trip_count > 1 && (old_trip_count & 1) == 0,
1260 "odd trip count for maximally unroll");
1261 // Don't need to adjust limit for maximally unroll since trip count is even.
1262 } else if (loop_head->has_exact_trip_count() && init->is_Con()) {
1263 // Loop's limit is constant. Loop's init could be constant when pre-loop
1264 // become peeled iteration.
1265 jlong init_con = init->get_int();
1266 // We can keep old loop limit if iterations count stays the same:
1267 // old_trip_count == new_trip_count * 2
1268 // Note: since old_trip_count >= 2 then new_trip_count >= 1
1269 // so we also don't need to adjust zero trip test.
1270 jlong limit_con = limit->get_int();
1271 // (stride_con*2) not overflow since stride_con <= 8.
1272 int new_stride_con = stride_con * 2;
1273 int stride_m = new_stride_con - (stride_con > 0 ? 1 : -1);
1274 jlong trip_count = (limit_con - init_con + stride_m)/new_stride_con;
1275 // New trip count should satisfy next conditions.
1276 assert(trip_count > 0 && (julong)trip_count < (julong)max_juint/2, "sanity");
1277 uint new_trip_count = (uint)trip_count;
1278 adjust_min_trip = (old_trip_count != new_trip_count*2);
1279 }
1281 if (adjust_min_trip) {
1282 // Step 2: Adjust the trip limit if it is called for.
1283 // The adjustment amount is -stride. Need to make sure if the
1284 // adjustment underflows or overflows, then the main loop is skipped.
1285 Node* cmp = loop_end->cmp_node();
1286 assert(cmp->in(2) == limit, "sanity");
1287 assert(opaq != NULL && opaq->in(1) == limit, "sanity");
1289 // Verify that policy_unroll result is still valid.
1290 const TypeInt* limit_type = _igvn.type(limit)->is_int();
1291 assert(stride_con > 0 && ((limit_type->_hi - stride_con) < limit_type->_hi) ||
1292 stride_con < 0 && ((limit_type->_lo - stride_con) > limit_type->_lo), "sanity");
1294 if (limit->is_Con()) {
1295 // The check in policy_unroll and the assert above guarantee
1296 // no underflow if limit is constant.
1297 new_limit = _igvn.intcon(limit->get_int() - stride_con);
1298 set_ctrl(new_limit, C->root());
1299 } else {
1300 // Limit is not constant.
1301 if (loop_head->unrolled_count() == 1) { // only for first unroll
1302 // Separate limit by Opaque node in case it is an incremented
1303 // variable from previous loop to avoid using pre-incremented
1304 // value which could increase register pressure.
1305 // Otherwise reorg_offsets() optimization will create a separate
1306 // Opaque node for each use of trip-counter and as result
1307 // zero trip guard limit will be different from loop limit.
1308 assert(has_ctrl(opaq), "should have it");
1309 Node* opaq_ctrl = get_ctrl(opaq);
1310 limit = new (C) Opaque2Node( C, limit );
1311 register_new_node( limit, opaq_ctrl );
1312 }
1313 if (stride_con > 0 && ((limit_type->_lo - stride_con) < limit_type->_lo) ||
1314 stride_con < 0 && ((limit_type->_hi - stride_con) > limit_type->_hi)) {
1315 // No underflow.
1316 new_limit = new (C) SubINode(limit, stride);
1317 } else {
1318 // (limit - stride) may underflow.
1319 // Clamp the adjustment value with MININT or MAXINT:
1320 //
1321 // new_limit = limit-stride
1322 // if (stride > 0)
1323 // new_limit = (limit < new_limit) ? MININT : new_limit;
1324 // else
1325 // new_limit = (limit > new_limit) ? MAXINT : new_limit;
1326 //
1327 BoolTest::mask bt = loop_end->test_trip();
1328 assert(bt == BoolTest::lt || bt == BoolTest::gt, "canonical test is expected");
1329 Node* adj_max = _igvn.intcon((stride_con > 0) ? min_jint : max_jint);
1330 set_ctrl(adj_max, C->root());
1331 Node* old_limit = NULL;
1332 Node* adj_limit = NULL;
1333 Node* bol = limit->is_CMove() ? limit->in(CMoveNode::Condition) : NULL;
1334 if (loop_head->unrolled_count() > 1 &&
1335 limit->is_CMove() && limit->Opcode() == Op_CMoveI &&
1336 limit->in(CMoveNode::IfTrue) == adj_max &&
1337 bol->as_Bool()->_test._test == bt &&
1338 bol->in(1)->Opcode() == Op_CmpI &&
1339 bol->in(1)->in(2) == limit->in(CMoveNode::IfFalse)) {
1340 // Loop was unrolled before.
1341 // Optimize the limit to avoid nested CMove:
1342 // use original limit as old limit.
1343 old_limit = bol->in(1)->in(1);
1344 // Adjust previous adjusted limit.
1345 adj_limit = limit->in(CMoveNode::IfFalse);
1346 adj_limit = new (C) SubINode(adj_limit, stride);
1347 } else {
1348 old_limit = limit;
1349 adj_limit = new (C) SubINode(limit, stride);
1350 }
1351 assert(old_limit != NULL && adj_limit != NULL, "");
1352 register_new_node( adj_limit, ctrl ); // adjust amount
1353 Node* adj_cmp = new (C) CmpINode(old_limit, adj_limit);
1354 register_new_node( adj_cmp, ctrl );
1355 Node* adj_bool = new (C) BoolNode(adj_cmp, bt);
1356 register_new_node( adj_bool, ctrl );
1357 new_limit = new (C) CMoveINode(adj_bool, adj_limit, adj_max, TypeInt::INT);
1358 }
1359 register_new_node(new_limit, ctrl);
1360 }
1361 assert(new_limit != NULL, "");
1362 // Replace in loop test.
1363 assert(loop_end->in(1)->in(1) == cmp, "sanity");
1364 if (cmp->outcnt() == 1 && loop_end->in(1)->outcnt() == 1) {
1365 // Don't need to create new test since only one user.
1366 _igvn.hash_delete(cmp);
1367 cmp->set_req(2, new_limit);
1368 } else {
1369 // Create new test since it is shared.
1370 Node* ctrl2 = loop_end->in(0);
1371 Node* cmp2 = cmp->clone();
1372 cmp2->set_req(2, new_limit);
1373 register_new_node(cmp2, ctrl2);
1374 Node* bol2 = loop_end->in(1)->clone();
1375 bol2->set_req(1, cmp2);
1376 register_new_node(bol2, ctrl2);
1377 _igvn.hash_delete(loop_end);
1378 loop_end->set_req(1, bol2);
1379 }
1380 // Step 3: Find the min-trip test guaranteed before a 'main' loop.
1381 // Make it a 1-trip test (means at least 2 trips).
1383 // Guard test uses an 'opaque' node which is not shared. Hence I
1384 // can edit it's inputs directly. Hammer in the new limit for the
1385 // minimum-trip guard.
1386 assert(opaq->outcnt() == 1, "");
1387 _igvn.hash_delete(opaq);
1388 opaq->set_req(1, new_limit);
1389 }
1391 // Adjust max trip count. The trip count is intentionally rounded
1392 // down here (e.g. 15-> 7-> 3-> 1) because if we unwittingly over-unroll,
1393 // the main, unrolled, part of the loop will never execute as it is protected
1394 // by the min-trip test. See bug 4834191 for a case where we over-unrolled
1395 // and later determined that part of the unrolled loop was dead.
1396 loop_head->set_trip_count(old_trip_count / 2);
1398 // Double the count of original iterations in the unrolled loop body.
1399 loop_head->double_unrolled_count();
1401 } else { // LoopLimitCheck
1403 // Adjust max trip count. The trip count is intentionally rounded
1404 // down here (e.g. 15-> 7-> 3-> 1) because if we unwittingly over-unroll,
1405 // the main, unrolled, part of the loop will never execute as it is protected
1406 // by the min-trip test. See bug 4834191 for a case where we over-unrolled
1407 // and later determined that part of the unrolled loop was dead.
1408 loop_head->set_trip_count(loop_head->trip_count() / 2);
1410 // Double the count of original iterations in the unrolled loop body.
1411 loop_head->double_unrolled_count();
1413 // -----------
1414 // Step 2: Cut back the trip counter for an unroll amount of 2.
1415 // Loop will normally trip (limit - init)/stride_con. Since it's a
1416 // CountedLoop this is exact (stride divides limit-init exactly).
1417 // We are going to double the loop body, so we want to knock off any
1418 // odd iteration: (trip_cnt & ~1). Then back compute a new limit.
1419 Node *span = new (C) SubINode( limit, init );
1420 register_new_node( span, ctrl );
1421 Node *trip = new (C) DivINode( 0, span, stride );
1422 register_new_node( trip, ctrl );
1423 Node *mtwo = _igvn.intcon(-2);
1424 set_ctrl(mtwo, C->root());
1425 Node *rond = new (C) AndINode( trip, mtwo );
1426 register_new_node( rond, ctrl );
1427 Node *spn2 = new (C) MulINode( rond, stride );
1428 register_new_node( spn2, ctrl );
1429 new_limit = new (C) AddINode( spn2, init );
1430 register_new_node( new_limit, ctrl );
1432 // Hammer in the new limit
1433 Node *ctrl2 = loop_end->in(0);
1434 Node *cmp2 = new (C) CmpINode( loop_head->incr(), new_limit );
1435 register_new_node( cmp2, ctrl2 );
1436 Node *bol2 = new (C) BoolNode( cmp2, loop_end->test_trip() );
1437 register_new_node( bol2, ctrl2 );
1438 _igvn.hash_delete(loop_end);
1439 loop_end->set_req(CountedLoopEndNode::TestValue, bol2);
1441 // Step 3: Find the min-trip test guaranteed before a 'main' loop.
1442 // Make it a 1-trip test (means at least 2 trips).
1443 if( adjust_min_trip ) {
1444 assert( new_limit != NULL, "" );
1445 // Guard test uses an 'opaque' node which is not shared. Hence I
1446 // can edit it's inputs directly. Hammer in the new limit for the
1447 // minimum-trip guard.
1448 assert( opaq->outcnt() == 1, "" );
1449 _igvn.hash_delete(opaq);
1450 opaq->set_req(1, new_limit);
1451 }
1452 } // LoopLimitCheck
1454 // ---------
1455 // Step 4: Clone the loop body. Move it inside the loop. This loop body
1456 // represents the odd iterations; since the loop trips an even number of
1457 // times its backedge is never taken. Kill the backedge.
1458 uint dd = dom_depth(loop_head);
1459 clone_loop( loop, old_new, dd );
1461 // Make backedges of the clone equal to backedges of the original.
1462 // Make the fall-in from the original come from the fall-out of the clone.
1463 for (DUIterator_Fast jmax, j = loop_head->fast_outs(jmax); j < jmax; j++) {
1464 Node* phi = loop_head->fast_out(j);
1465 if( phi->is_Phi() && phi->in(0) == loop_head && phi->outcnt() > 0 ) {
1466 Node *newphi = old_new[phi->_idx];
1467 _igvn.hash_delete( phi );
1468 _igvn.hash_delete( newphi );
1470 phi ->set_req(LoopNode:: EntryControl, newphi->in(LoopNode::LoopBackControl));
1471 newphi->set_req(LoopNode::LoopBackControl, phi ->in(LoopNode::LoopBackControl));
1472 phi ->set_req(LoopNode::LoopBackControl, C->top());
1473 }
1474 }
1475 Node *clone_head = old_new[loop_head->_idx];
1476 _igvn.hash_delete( clone_head );
1477 loop_head ->set_req(LoopNode:: EntryControl, clone_head->in(LoopNode::LoopBackControl));
1478 clone_head->set_req(LoopNode::LoopBackControl, loop_head ->in(LoopNode::LoopBackControl));
1479 loop_head ->set_req(LoopNode::LoopBackControl, C->top());
1480 loop->_head = clone_head; // New loop header
1482 set_idom(loop_head, loop_head ->in(LoopNode::EntryControl), dd);
1483 set_idom(clone_head, clone_head->in(LoopNode::EntryControl), dd);
1485 // Kill the clone's backedge
1486 Node *newcle = old_new[loop_end->_idx];
1487 _igvn.hash_delete( newcle );
1488 Node *one = _igvn.intcon(1);
1489 set_ctrl(one, C->root());
1490 newcle->set_req(1, one);
1491 // Force clone into same loop body
1492 uint max = loop->_body.size();
1493 for( uint k = 0; k < max; k++ ) {
1494 Node *old = loop->_body.at(k);
1495 Node *nnn = old_new[old->_idx];
1496 loop->_body.push(nnn);
1497 if (!has_ctrl(old))
1498 set_loop(nnn, loop);
1499 }
1501 loop->record_for_igvn();
1502 }
1504 //------------------------------do_maximally_unroll----------------------------
1506 void PhaseIdealLoop::do_maximally_unroll( IdealLoopTree *loop, Node_List &old_new ) {
1507 CountedLoopNode *cl = loop->_head->as_CountedLoop();
1508 assert(cl->has_exact_trip_count(), "trip count is not exact");
1509 assert(cl->trip_count() > 0, "");
1510 #ifndef PRODUCT
1511 if (TraceLoopOpts) {
1512 tty->print("MaxUnroll %d ", cl->trip_count());
1513 loop->dump_head();
1514 }
1515 #endif
1517 // If loop is tripping an odd number of times, peel odd iteration
1518 if ((cl->trip_count() & 1) == 1) {
1519 do_peeling(loop, old_new);
1520 }
1522 // Now its tripping an even number of times remaining. Double loop body.
1523 // Do not adjust pre-guards; they are not needed and do not exist.
1524 if (cl->trip_count() > 0) {
1525 assert((cl->trip_count() & 1) == 0, "missed peeling");
1526 do_unroll(loop, old_new, false);
1527 }
1528 }
1530 //------------------------------dominates_backedge---------------------------------
1531 // Returns true if ctrl is executed on every complete iteration
1532 bool IdealLoopTree::dominates_backedge(Node* ctrl) {
1533 assert(ctrl->is_CFG(), "must be control");
1534 Node* backedge = _head->as_Loop()->in(LoopNode::LoopBackControl);
1535 return _phase->dom_lca_internal(ctrl, backedge) == ctrl;
1536 }
1538 //------------------------------adjust_limit-----------------------------------
1539 // Helper function for add_constraint().
1540 Node* PhaseIdealLoop::adjust_limit(int stride_con, Node * scale, Node *offset, Node *rc_limit, Node *loop_limit, Node *pre_ctrl) {
1541 // Compute "I :: (limit-offset)/scale"
1542 Node *con = new (C) SubINode(rc_limit, offset);
1543 register_new_node(con, pre_ctrl);
1544 Node *X = new (C) DivINode(0, con, scale);
1545 register_new_node(X, pre_ctrl);
1547 // Adjust loop limit
1548 loop_limit = (stride_con > 0)
1549 ? (Node*)(new (C) MinINode(loop_limit, X))
1550 : (Node*)(new (C) MaxINode(loop_limit, X));
1551 register_new_node(loop_limit, pre_ctrl);
1552 return loop_limit;
1553 }
1555 //------------------------------add_constraint---------------------------------
1556 // Constrain the main loop iterations so the conditions:
1557 // low_limit <= scale_con * I + offset < upper_limit
1558 // always holds true. That is, either increase the number of iterations in
1559 // the pre-loop or the post-loop until the condition holds true in the main
1560 // loop. Stride, scale, offset and limit are all loop invariant. Further,
1561 // stride and scale are constants (offset and limit often are).
1562 void PhaseIdealLoop::add_constraint( int stride_con, int scale_con, Node *offset, Node *low_limit, Node *upper_limit, Node *pre_ctrl, Node **pre_limit, Node **main_limit ) {
1563 // For positive stride, the pre-loop limit always uses a MAX function
1564 // and the main loop a MIN function. For negative stride these are
1565 // reversed.
1567 // Also for positive stride*scale the affine function is increasing, so the
1568 // pre-loop must check for underflow and the post-loop for overflow.
1569 // Negative stride*scale reverses this; pre-loop checks for overflow and
1570 // post-loop for underflow.
1572 Node *scale = _igvn.intcon(scale_con);
1573 set_ctrl(scale, C->root());
1575 if ((stride_con^scale_con) >= 0) { // Use XOR to avoid overflow
1576 // The overflow limit: scale*I+offset < upper_limit
1577 // For main-loop compute
1578 // ( if (scale > 0) /* and stride > 0 */
1579 // I < (upper_limit-offset)/scale
1580 // else /* scale < 0 and stride < 0 */
1581 // I > (upper_limit-offset)/scale
1582 // )
1583 //
1584 // (upper_limit-offset) may overflow or underflow.
1585 // But it is fine since main loop will either have
1586 // less iterations or will be skipped in such case.
1587 *main_limit = adjust_limit(stride_con, scale, offset, upper_limit, *main_limit, pre_ctrl);
1589 // The underflow limit: low_limit <= scale*I+offset.
1590 // For pre-loop compute
1591 // NOT(scale*I+offset >= low_limit)
1592 // scale*I+offset < low_limit
1593 // ( if (scale > 0) /* and stride > 0 */
1594 // I < (low_limit-offset)/scale
1595 // else /* scale < 0 and stride < 0 */
1596 // I > (low_limit-offset)/scale
1597 // )
1599 if (low_limit->get_int() == -max_jint) {
1600 if (!RangeLimitCheck) return;
1601 // We need this guard when scale*pre_limit+offset >= limit
1602 // due to underflow. So we need execute pre-loop until
1603 // scale*I+offset >= min_int. But (min_int-offset) will
1604 // underflow when offset > 0 and X will be > original_limit
1605 // when stride > 0. To avoid it we replace positive offset with 0.
1606 //
1607 // Also (min_int+1 == -max_int) is used instead of min_int here
1608 // to avoid problem with scale == -1 (min_int/(-1) == min_int).
1609 Node* shift = _igvn.intcon(31);
1610 set_ctrl(shift, C->root());
1611 Node* sign = new (C) RShiftINode(offset, shift);
1612 register_new_node(sign, pre_ctrl);
1613 offset = new (C) AndINode(offset, sign);
1614 register_new_node(offset, pre_ctrl);
1615 } else {
1616 assert(low_limit->get_int() == 0, "wrong low limit for range check");
1617 // The only problem we have here when offset == min_int
1618 // since (0-min_int) == min_int. It may be fine for stride > 0
1619 // but for stride < 0 X will be < original_limit. To avoid it
1620 // max(pre_limit, original_limit) is used in do_range_check().
1621 }
1622 // Pass (-stride) to indicate pre_loop_cond = NOT(main_loop_cond);
1623 *pre_limit = adjust_limit((-stride_con), scale, offset, low_limit, *pre_limit, pre_ctrl);
1625 } else { // stride_con*scale_con < 0
1626 // For negative stride*scale pre-loop checks for overflow and
1627 // post-loop for underflow.
1628 //
1629 // The overflow limit: scale*I+offset < upper_limit
1630 // For pre-loop compute
1631 // NOT(scale*I+offset < upper_limit)
1632 // scale*I+offset >= upper_limit
1633 // scale*I+offset+1 > upper_limit
1634 // ( if (scale < 0) /* and stride > 0 */
1635 // I < (upper_limit-(offset+1))/scale
1636 // else /* scale > 0 and stride < 0 */
1637 // I > (upper_limit-(offset+1))/scale
1638 // )
1639 //
1640 // (upper_limit-offset-1) may underflow or overflow.
1641 // To avoid it min(pre_limit, original_limit) is used
1642 // in do_range_check() for stride > 0 and max() for < 0.
1643 Node *one = _igvn.intcon(1);
1644 set_ctrl(one, C->root());
1646 Node *plus_one = new (C) AddINode(offset, one);
1647 register_new_node( plus_one, pre_ctrl );
1648 // Pass (-stride) to indicate pre_loop_cond = NOT(main_loop_cond);
1649 *pre_limit = adjust_limit((-stride_con), scale, plus_one, upper_limit, *pre_limit, pre_ctrl);
1651 if (low_limit->get_int() == -max_jint) {
1652 if (!RangeLimitCheck) return;
1653 // We need this guard when scale*main_limit+offset >= limit
1654 // due to underflow. So we need execute main-loop while
1655 // scale*I+offset+1 > min_int. But (min_int-offset-1) will
1656 // underflow when (offset+1) > 0 and X will be < main_limit
1657 // when scale < 0 (and stride > 0). To avoid it we replace
1658 // positive (offset+1) with 0.
1659 //
1660 // Also (min_int+1 == -max_int) is used instead of min_int here
1661 // to avoid problem with scale == -1 (min_int/(-1) == min_int).
1662 Node* shift = _igvn.intcon(31);
1663 set_ctrl(shift, C->root());
1664 Node* sign = new (C) RShiftINode(plus_one, shift);
1665 register_new_node(sign, pre_ctrl);
1666 plus_one = new (C) AndINode(plus_one, sign);
1667 register_new_node(plus_one, pre_ctrl);
1668 } else {
1669 assert(low_limit->get_int() == 0, "wrong low limit for range check");
1670 // The only problem we have here when offset == max_int
1671 // since (max_int+1) == min_int and (0-min_int) == min_int.
1672 // But it is fine since main loop will either have
1673 // less iterations or will be skipped in such case.
1674 }
1675 // The underflow limit: low_limit <= scale*I+offset.
1676 // For main-loop compute
1677 // scale*I+offset+1 > low_limit
1678 // ( if (scale < 0) /* and stride > 0 */
1679 // I < (low_limit-(offset+1))/scale
1680 // else /* scale > 0 and stride < 0 */
1681 // I > (low_limit-(offset+1))/scale
1682 // )
1684 *main_limit = adjust_limit(stride_con, scale, plus_one, low_limit, *main_limit, pre_ctrl);
1685 }
1686 }
1689 //------------------------------is_scaled_iv---------------------------------
1690 // Return true if exp is a constant times an induction var
1691 bool PhaseIdealLoop::is_scaled_iv(Node* exp, Node* iv, int* p_scale) {
1692 if (exp == iv) {
1693 if (p_scale != NULL) {
1694 *p_scale = 1;
1695 }
1696 return true;
1697 }
1698 int opc = exp->Opcode();
1699 if (opc == Op_MulI) {
1700 if (exp->in(1) == iv && exp->in(2)->is_Con()) {
1701 if (p_scale != NULL) {
1702 *p_scale = exp->in(2)->get_int();
1703 }
1704 return true;
1705 }
1706 if (exp->in(2) == iv && exp->in(1)->is_Con()) {
1707 if (p_scale != NULL) {
1708 *p_scale = exp->in(1)->get_int();
1709 }
1710 return true;
1711 }
1712 } else if (opc == Op_LShiftI) {
1713 if (exp->in(1) == iv && exp->in(2)->is_Con()) {
1714 if (p_scale != NULL) {
1715 *p_scale = 1 << exp->in(2)->get_int();
1716 }
1717 return true;
1718 }
1719 }
1720 return false;
1721 }
1723 //-----------------------------is_scaled_iv_plus_offset------------------------------
1724 // Return true if exp is a simple induction variable expression: k1*iv + (invar + k2)
1725 bool PhaseIdealLoop::is_scaled_iv_plus_offset(Node* exp, Node* iv, int* p_scale, Node** p_offset, int depth) {
1726 if (is_scaled_iv(exp, iv, p_scale)) {
1727 if (p_offset != NULL) {
1728 Node *zero = _igvn.intcon(0);
1729 set_ctrl(zero, C->root());
1730 *p_offset = zero;
1731 }
1732 return true;
1733 }
1734 int opc = exp->Opcode();
1735 if (opc == Op_AddI) {
1736 if (is_scaled_iv(exp->in(1), iv, p_scale)) {
1737 if (p_offset != NULL) {
1738 *p_offset = exp->in(2);
1739 }
1740 return true;
1741 }
1742 if (exp->in(2)->is_Con()) {
1743 Node* offset2 = NULL;
1744 if (depth < 2 &&
1745 is_scaled_iv_plus_offset(exp->in(1), iv, p_scale,
1746 p_offset != NULL ? &offset2 : NULL, depth+1)) {
1747 if (p_offset != NULL) {
1748 Node *ctrl_off2 = get_ctrl(offset2);
1749 Node* offset = new (C) AddINode(offset2, exp->in(2));
1750 register_new_node(offset, ctrl_off2);
1751 *p_offset = offset;
1752 }
1753 return true;
1754 }
1755 }
1756 } else if (opc == Op_SubI) {
1757 if (is_scaled_iv(exp->in(1), iv, p_scale)) {
1758 if (p_offset != NULL) {
1759 Node *zero = _igvn.intcon(0);
1760 set_ctrl(zero, C->root());
1761 Node *ctrl_off = get_ctrl(exp->in(2));
1762 Node* offset = new (C) SubINode(zero, exp->in(2));
1763 register_new_node(offset, ctrl_off);
1764 *p_offset = offset;
1765 }
1766 return true;
1767 }
1768 if (is_scaled_iv(exp->in(2), iv, p_scale)) {
1769 if (p_offset != NULL) {
1770 *p_scale *= -1;
1771 *p_offset = exp->in(1);
1772 }
1773 return true;
1774 }
1775 }
1776 return false;
1777 }
1779 //------------------------------do_range_check---------------------------------
1780 // Eliminate range-checks and other trip-counter vs loop-invariant tests.
1781 void PhaseIdealLoop::do_range_check( IdealLoopTree *loop, Node_List &old_new ) {
1782 #ifndef PRODUCT
1783 if (PrintOpto && VerifyLoopOptimizations) {
1784 tty->print("Range Check Elimination ");
1785 loop->dump_head();
1786 } else if (TraceLoopOpts) {
1787 tty->print("RangeCheck ");
1788 loop->dump_head();
1789 }
1790 #endif
1791 assert(RangeCheckElimination, "");
1792 CountedLoopNode *cl = loop->_head->as_CountedLoop();
1793 assert(cl->is_main_loop(), "");
1795 // protect against stride not being a constant
1796 if (!cl->stride_is_con())
1797 return;
1799 // Find the trip counter; we are iteration splitting based on it
1800 Node *trip_counter = cl->phi();
1801 // Find the main loop limit; we will trim it's iterations
1802 // to not ever trip end tests
1803 Node *main_limit = cl->limit();
1805 // Need to find the main-loop zero-trip guard
1806 Node *ctrl = cl->in(LoopNode::EntryControl);
1807 assert(ctrl->Opcode() == Op_IfTrue || ctrl->Opcode() == Op_IfFalse, "");
1808 Node *iffm = ctrl->in(0);
1809 assert(iffm->Opcode() == Op_If, "");
1810 Node *bolzm = iffm->in(1);
1811 assert(bolzm->Opcode() == Op_Bool, "");
1812 Node *cmpzm = bolzm->in(1);
1813 assert(cmpzm->is_Cmp(), "");
1814 Node *opqzm = cmpzm->in(2);
1815 // Can not optimize a loop if zero-trip Opaque1 node is optimized
1816 // away and then another round of loop opts attempted.
1817 if (opqzm->Opcode() != Op_Opaque1)
1818 return;
1819 assert(opqzm->in(1) == main_limit, "do not understand situation");
1821 // Find the pre-loop limit; we will expand it's iterations to
1822 // not ever trip low tests.
1823 Node *p_f = iffm->in(0);
1824 assert(p_f->Opcode() == Op_IfFalse, "");
1825 CountedLoopEndNode *pre_end = p_f->in(0)->as_CountedLoopEnd();
1826 assert(pre_end->loopnode()->is_pre_loop(), "");
1827 Node *pre_opaq1 = pre_end->limit();
1828 // Occasionally it's possible for a pre-loop Opaque1 node to be
1829 // optimized away and then another round of loop opts attempted.
1830 // We can not optimize this particular loop in that case.
1831 if (pre_opaq1->Opcode() != Op_Opaque1)
1832 return;
1833 Opaque1Node *pre_opaq = (Opaque1Node*)pre_opaq1;
1834 Node *pre_limit = pre_opaq->in(1);
1836 // Where do we put new limit calculations
1837 Node *pre_ctrl = pre_end->loopnode()->in(LoopNode::EntryControl);
1839 // Ensure the original loop limit is available from the
1840 // pre-loop Opaque1 node.
1841 Node *orig_limit = pre_opaq->original_loop_limit();
1842 if (orig_limit == NULL || _igvn.type(orig_limit) == Type::TOP)
1843 return;
1845 // Must know if its a count-up or count-down loop
1847 int stride_con = cl->stride_con();
1848 Node *zero = _igvn.intcon(0);
1849 Node *one = _igvn.intcon(1);
1850 // Use symmetrical int range [-max_jint,max_jint]
1851 Node *mini = _igvn.intcon(-max_jint);
1852 set_ctrl(zero, C->root());
1853 set_ctrl(one, C->root());
1854 set_ctrl(mini, C->root());
1856 // Range checks that do not dominate the loop backedge (ie.
1857 // conditionally executed) can lengthen the pre loop limit beyond
1858 // the original loop limit. To prevent this, the pre limit is
1859 // (for stride > 0) MINed with the original loop limit (MAXed
1860 // stride < 0) when some range_check (rc) is conditionally
1861 // executed.
1862 bool conditional_rc = false;
1864 // Check loop body for tests of trip-counter plus loop-invariant vs
1865 // loop-invariant.
1866 for( uint i = 0; i < loop->_body.size(); i++ ) {
1867 Node *iff = loop->_body[i];
1868 if( iff->Opcode() == Op_If ) { // Test?
1870 // Test is an IfNode, has 2 projections. If BOTH are in the loop
1871 // we need loop unswitching instead of iteration splitting.
1872 Node *exit = loop->is_loop_exit(iff);
1873 if( !exit ) continue;
1874 int flip = (exit->Opcode() == Op_IfTrue) ? 1 : 0;
1876 // Get boolean condition to test
1877 Node *i1 = iff->in(1);
1878 if( !i1->is_Bool() ) continue;
1879 BoolNode *bol = i1->as_Bool();
1880 BoolTest b_test = bol->_test;
1881 // Flip sense of test if exit condition is flipped
1882 if( flip )
1883 b_test = b_test.negate();
1885 // Get compare
1886 Node *cmp = bol->in(1);
1888 // Look for trip_counter + offset vs limit
1889 Node *rc_exp = cmp->in(1);
1890 Node *limit = cmp->in(2);
1891 jint scale_con= 1; // Assume trip counter not scaled
1893 Node *limit_c = get_ctrl(limit);
1894 if( loop->is_member(get_loop(limit_c) ) ) {
1895 // Compare might have operands swapped; commute them
1896 b_test = b_test.commute();
1897 rc_exp = cmp->in(2);
1898 limit = cmp->in(1);
1899 limit_c = get_ctrl(limit);
1900 if( loop->is_member(get_loop(limit_c) ) )
1901 continue; // Both inputs are loop varying; cannot RCE
1902 }
1903 // Here we know 'limit' is loop invariant
1905 // 'limit' maybe pinned below the zero trip test (probably from a
1906 // previous round of rce), in which case, it can't be used in the
1907 // zero trip test expression which must occur before the zero test's if.
1908 if( limit_c == ctrl ) {
1909 continue; // Don't rce this check but continue looking for other candidates.
1910 }
1912 // Check for scaled induction variable plus an offset
1913 Node *offset = NULL;
1915 if (!is_scaled_iv_plus_offset(rc_exp, trip_counter, &scale_con, &offset)) {
1916 continue;
1917 }
1919 Node *offset_c = get_ctrl(offset);
1920 if( loop->is_member( get_loop(offset_c) ) )
1921 continue; // Offset is not really loop invariant
1922 // Here we know 'offset' is loop invariant.
1924 // As above for the 'limit', the 'offset' maybe pinned below the
1925 // zero trip test.
1926 if( offset_c == ctrl ) {
1927 continue; // Don't rce this check but continue looking for other candidates.
1928 }
1929 #ifdef ASSERT
1930 if (TraceRangeLimitCheck) {
1931 tty->print_cr("RC bool node%s", flip ? " flipped:" : ":");
1932 bol->dump(2);
1933 }
1934 #endif
1935 // At this point we have the expression as:
1936 // scale_con * trip_counter + offset :: limit
1937 // where scale_con, offset and limit are loop invariant. Trip_counter
1938 // monotonically increases by stride_con, a constant. Both (or either)
1939 // stride_con and scale_con can be negative which will flip about the
1940 // sense of the test.
1942 // Adjust pre and main loop limits to guard the correct iteration set
1943 if( cmp->Opcode() == Op_CmpU ) {// Unsigned compare is really 2 tests
1944 if( b_test._test == BoolTest::lt ) { // Range checks always use lt
1945 // The underflow and overflow limits: 0 <= scale*I+offset < limit
1946 add_constraint( stride_con, scale_con, offset, zero, limit, pre_ctrl, &pre_limit, &main_limit );
1947 if (!conditional_rc) {
1948 // (0-offset)/scale could be outside of loop iterations range.
1949 conditional_rc = !loop->dominates_backedge(iff) || RangeLimitCheck;
1950 }
1951 } else {
1952 #ifndef PRODUCT
1953 if( PrintOpto )
1954 tty->print_cr("missed RCE opportunity");
1955 #endif
1956 continue; // In release mode, ignore it
1957 }
1958 } else { // Otherwise work on normal compares
1959 switch( b_test._test ) {
1960 case BoolTest::gt:
1961 // Fall into GE case
1962 case BoolTest::ge:
1963 // Convert (I*scale+offset) >= Limit to (I*(-scale)+(-offset)) <= -Limit
1964 scale_con = -scale_con;
1965 offset = new (C) SubINode( zero, offset );
1966 register_new_node( offset, pre_ctrl );
1967 limit = new (C) SubINode( zero, limit );
1968 register_new_node( limit, pre_ctrl );
1969 // Fall into LE case
1970 case BoolTest::le:
1971 if (b_test._test != BoolTest::gt) {
1972 // Convert X <= Y to X < Y+1
1973 limit = new (C) AddINode( limit, one );
1974 register_new_node( limit, pre_ctrl );
1975 }
1976 // Fall into LT case
1977 case BoolTest::lt:
1978 // The underflow and overflow limits: MIN_INT <= scale*I+offset < limit
1979 // Note: (MIN_INT+1 == -MAX_INT) is used instead of MIN_INT here
1980 // to avoid problem with scale == -1: MIN_INT/(-1) == MIN_INT.
1981 add_constraint( stride_con, scale_con, offset, mini, limit, pre_ctrl, &pre_limit, &main_limit );
1982 if (!conditional_rc) {
1983 // ((MIN_INT+1)-offset)/scale could be outside of loop iterations range.
1984 // Note: negative offset is replaced with 0 but (MIN_INT+1)/scale could
1985 // still be outside of loop range.
1986 conditional_rc = !loop->dominates_backedge(iff) || RangeLimitCheck;
1987 }
1988 break;
1989 default:
1990 #ifndef PRODUCT
1991 if( PrintOpto )
1992 tty->print_cr("missed RCE opportunity");
1993 #endif
1994 continue; // Unhandled case
1995 }
1996 }
1998 // Kill the eliminated test
1999 C->set_major_progress();
2000 Node *kill_con = _igvn.intcon( 1-flip );
2001 set_ctrl(kill_con, C->root());
2002 _igvn.replace_input_of(iff, 1, kill_con);
2003 // Find surviving projection
2004 assert(iff->is_If(), "");
2005 ProjNode* dp = ((IfNode*)iff)->proj_out(1-flip);
2006 // Find loads off the surviving projection; remove their control edge
2007 for (DUIterator_Fast imax, i = dp->fast_outs(imax); i < imax; i++) {
2008 Node* cd = dp->fast_out(i); // Control-dependent node
2009 if (cd->is_Load() && cd->depends_only_on_test()) { // Loads can now float around in the loop
2010 // Allow the load to float around in the loop, or before it
2011 // but NOT before the pre-loop.
2012 _igvn.replace_input_of(cd, 0, ctrl); // ctrl, not NULL
2013 --i;
2014 --imax;
2015 }
2016 }
2018 } // End of is IF
2020 }
2022 // Update loop limits
2023 if (conditional_rc) {
2024 pre_limit = (stride_con > 0) ? (Node*)new (C) MinINode(pre_limit, orig_limit)
2025 : (Node*)new (C) MaxINode(pre_limit, orig_limit);
2026 register_new_node(pre_limit, pre_ctrl);
2027 }
2028 _igvn.hash_delete(pre_opaq);
2029 pre_opaq->set_req(1, pre_limit);
2031 // Note:: we are making the main loop limit no longer precise;
2032 // need to round up based on stride.
2033 cl->set_nonexact_trip_count();
2034 if (!LoopLimitCheck && stride_con != 1 && stride_con != -1) { // Cutout for common case
2035 // "Standard" round-up logic: ([main_limit-init+(y-1)]/y)*y+init
2036 // Hopefully, compiler will optimize for powers of 2.
2037 Node *ctrl = get_ctrl(main_limit);
2038 Node *stride = cl->stride();
2039 Node *init = cl->init_trip();
2040 Node *span = new (C) SubINode(main_limit,init);
2041 register_new_node(span,ctrl);
2042 Node *rndup = _igvn.intcon(stride_con + ((stride_con>0)?-1:1));
2043 Node *add = new (C) AddINode(span,rndup);
2044 register_new_node(add,ctrl);
2045 Node *div = new (C) DivINode(0,add,stride);
2046 register_new_node(div,ctrl);
2047 Node *mul = new (C) MulINode(div,stride);
2048 register_new_node(mul,ctrl);
2049 Node *newlim = new (C) AddINode(mul,init);
2050 register_new_node(newlim,ctrl);
2051 main_limit = newlim;
2052 }
2054 Node *main_cle = cl->loopexit();
2055 Node *main_bol = main_cle->in(1);
2056 // Hacking loop bounds; need private copies of exit test
2057 if( main_bol->outcnt() > 1 ) {// BoolNode shared?
2058 _igvn.hash_delete(main_cle);
2059 main_bol = main_bol->clone();// Clone a private BoolNode
2060 register_new_node( main_bol, main_cle->in(0) );
2061 main_cle->set_req(1,main_bol);
2062 }
2063 Node *main_cmp = main_bol->in(1);
2064 if( main_cmp->outcnt() > 1 ) { // CmpNode shared?
2065 _igvn.hash_delete(main_bol);
2066 main_cmp = main_cmp->clone();// Clone a private CmpNode
2067 register_new_node( main_cmp, main_cle->in(0) );
2068 main_bol->set_req(1,main_cmp);
2069 }
2070 // Hack the now-private loop bounds
2071 _igvn.replace_input_of(main_cmp, 2, main_limit);
2072 // The OpaqueNode is unshared by design
2073 assert( opqzm->outcnt() == 1, "cannot hack shared node" );
2074 _igvn.replace_input_of(opqzm, 1, main_limit);
2075 }
2077 //------------------------------DCE_loop_body----------------------------------
2078 // Remove simplistic dead code from loop body
2079 void IdealLoopTree::DCE_loop_body() {
2080 for( uint i = 0; i < _body.size(); i++ )
2081 if( _body.at(i)->outcnt() == 0 )
2082 _body.map( i--, _body.pop() );
2083 }
2086 //------------------------------adjust_loop_exit_prob--------------------------
2087 // Look for loop-exit tests with the 50/50 (or worse) guesses from the parsing stage.
2088 // Replace with a 1-in-10 exit guess.
2089 void IdealLoopTree::adjust_loop_exit_prob( PhaseIdealLoop *phase ) {
2090 Node *test = tail();
2091 while( test != _head ) {
2092 uint top = test->Opcode();
2093 if( top == Op_IfTrue || top == Op_IfFalse ) {
2094 int test_con = ((ProjNode*)test)->_con;
2095 assert(top == (uint)(test_con? Op_IfTrue: Op_IfFalse), "sanity");
2096 IfNode *iff = test->in(0)->as_If();
2097 if( iff->outcnt() == 2 ) { // Ignore dead tests
2098 Node *bol = iff->in(1);
2099 if( bol && bol->req() > 1 && bol->in(1) &&
2100 ((bol->in(1)->Opcode() == Op_StorePConditional ) ||
2101 (bol->in(1)->Opcode() == Op_StoreIConditional ) ||
2102 (bol->in(1)->Opcode() == Op_StoreLConditional ) ||
2103 (bol->in(1)->Opcode() == Op_CompareAndSwapI ) ||
2104 (bol->in(1)->Opcode() == Op_CompareAndSwapL ) ||
2105 (bol->in(1)->Opcode() == Op_CompareAndSwapP ) ||
2106 (bol->in(1)->Opcode() == Op_CompareAndSwapN )))
2107 return; // Allocation loops RARELY take backedge
2108 // Find the OTHER exit path from the IF
2109 Node* ex = iff->proj_out(1-test_con);
2110 float p = iff->_prob;
2111 if( !phase->is_member( this, ex ) && iff->_fcnt == COUNT_UNKNOWN ) {
2112 if( top == Op_IfTrue ) {
2113 if( p < (PROB_FAIR + PROB_UNLIKELY_MAG(3))) {
2114 iff->_prob = PROB_STATIC_FREQUENT;
2115 }
2116 } else {
2117 if( p > (PROB_FAIR - PROB_UNLIKELY_MAG(3))) {
2118 iff->_prob = PROB_STATIC_INFREQUENT;
2119 }
2120 }
2121 }
2122 }
2123 }
2124 test = phase->idom(test);
2125 }
2126 }
2129 //------------------------------policy_do_remove_empty_loop--------------------
2130 // Micro-benchmark spamming. Policy is to always remove empty loops.
2131 // The 'DO' part is to replace the trip counter with the value it will
2132 // have on the last iteration. This will break the loop.
2133 bool IdealLoopTree::policy_do_remove_empty_loop( PhaseIdealLoop *phase ) {
2134 // Minimum size must be empty loop
2135 if (_body.size() > EMPTY_LOOP_SIZE)
2136 return false;
2138 if (!_head->is_CountedLoop())
2139 return false; // Dead loop
2140 CountedLoopNode *cl = _head->as_CountedLoop();
2141 if (!cl->is_valid_counted_loop())
2142 return false; // Malformed loop
2143 if (!phase->is_member(this, phase->get_ctrl(cl->loopexit()->in(CountedLoopEndNode::TestValue))))
2144 return false; // Infinite loop
2146 #ifdef ASSERT
2147 // Ensure only one phi which is the iv.
2148 Node* iv = NULL;
2149 for (DUIterator_Fast imax, i = cl->fast_outs(imax); i < imax; i++) {
2150 Node* n = cl->fast_out(i);
2151 if (n->Opcode() == Op_Phi) {
2152 assert(iv == NULL, "Too many phis" );
2153 iv = n;
2154 }
2155 }
2156 assert(iv == cl->phi(), "Wrong phi" );
2157 #endif
2159 // main and post loops have explicitly created zero trip guard
2160 bool needs_guard = !cl->is_main_loop() && !cl->is_post_loop();
2161 if (needs_guard) {
2162 // Skip guard if values not overlap.
2163 const TypeInt* init_t = phase->_igvn.type(cl->init_trip())->is_int();
2164 const TypeInt* limit_t = phase->_igvn.type(cl->limit())->is_int();
2165 int stride_con = cl->stride_con();
2166 if (stride_con > 0) {
2167 needs_guard = (init_t->_hi >= limit_t->_lo);
2168 } else {
2169 needs_guard = (init_t->_lo <= limit_t->_hi);
2170 }
2171 }
2172 if (needs_guard) {
2173 // Check for an obvious zero trip guard.
2174 Node* inctrl = PhaseIdealLoop::skip_loop_predicates(cl->in(LoopNode::EntryControl));
2175 if (inctrl->Opcode() == Op_IfTrue) {
2176 // The test should look like just the backedge of a CountedLoop
2177 Node* iff = inctrl->in(0);
2178 if (iff->is_If()) {
2179 Node* bol = iff->in(1);
2180 if (bol->is_Bool() && bol->as_Bool()->_test._test == cl->loopexit()->test_trip()) {
2181 Node* cmp = bol->in(1);
2182 if (cmp->is_Cmp() && cmp->in(1) == cl->init_trip() && cmp->in(2) == cl->limit()) {
2183 needs_guard = false;
2184 }
2185 }
2186 }
2187 }
2188 }
2190 #ifndef PRODUCT
2191 if (PrintOpto) {
2192 tty->print("Removing empty loop with%s zero trip guard", needs_guard ? "out" : "");
2193 this->dump_head();
2194 } else if (TraceLoopOpts) {
2195 tty->print("Empty with%s zero trip guard ", needs_guard ? "out" : "");
2196 this->dump_head();
2197 }
2198 #endif
2200 if (needs_guard) {
2201 // Peel the loop to ensure there's a zero trip guard
2202 Node_List old_new;
2203 phase->do_peeling(this, old_new);
2204 }
2206 // Replace the phi at loop head with the final value of the last
2207 // iteration. Then the CountedLoopEnd will collapse (backedge never
2208 // taken) and all loop-invariant uses of the exit values will be correct.
2209 Node *phi = cl->phi();
2210 Node *exact_limit = phase->exact_limit(this);
2211 if (exact_limit != cl->limit()) {
2212 // We also need to replace the original limit to collapse loop exit.
2213 Node* cmp = cl->loopexit()->cmp_node();
2214 assert(cl->limit() == cmp->in(2), "sanity");
2215 phase->_igvn._worklist.push(cmp->in(2)); // put limit on worklist
2216 phase->_igvn.replace_input_of(cmp, 2, exact_limit); // put cmp on worklist
2217 }
2218 // Note: the final value after increment should not overflow since
2219 // counted loop has limit check predicate.
2220 Node *final = new (phase->C) SubINode( exact_limit, cl->stride() );
2221 phase->register_new_node(final,cl->in(LoopNode::EntryControl));
2222 phase->_igvn.replace_node(phi,final);
2223 phase->C->set_major_progress();
2224 return true;
2225 }
2227 //------------------------------policy_do_one_iteration_loop-------------------
2228 // Convert one iteration loop into normal code.
2229 bool IdealLoopTree::policy_do_one_iteration_loop( PhaseIdealLoop *phase ) {
2230 if (!_head->as_Loop()->is_valid_counted_loop())
2231 return false; // Only for counted loop
2233 CountedLoopNode *cl = _head->as_CountedLoop();
2234 if (!cl->has_exact_trip_count() || cl->trip_count() != 1) {
2235 return false;
2236 }
2238 #ifndef PRODUCT
2239 if(TraceLoopOpts) {
2240 tty->print("OneIteration ");
2241 this->dump_head();
2242 }
2243 #endif
2245 Node *init_n = cl->init_trip();
2246 #ifdef ASSERT
2247 // Loop boundaries should be constant since trip count is exact.
2248 assert(init_n->get_int() + cl->stride_con() >= cl->limit()->get_int(), "should be one iteration");
2249 #endif
2250 // Replace the phi at loop head with the value of the init_trip.
2251 // Then the CountedLoopEnd will collapse (backedge will not be taken)
2252 // and all loop-invariant uses of the exit values will be correct.
2253 phase->_igvn.replace_node(cl->phi(), cl->init_trip());
2254 phase->C->set_major_progress();
2255 return true;
2256 }
2258 //=============================================================================
2259 //------------------------------iteration_split_impl---------------------------
2260 bool IdealLoopTree::iteration_split_impl( PhaseIdealLoop *phase, Node_List &old_new ) {
2261 // Compute exact loop trip count if possible.
2262 compute_exact_trip_count(phase);
2264 // Convert one iteration loop into normal code.
2265 if (policy_do_one_iteration_loop(phase))
2266 return true;
2268 // Check and remove empty loops (spam micro-benchmarks)
2269 if (policy_do_remove_empty_loop(phase))
2270 return true; // Here we removed an empty loop
2272 bool should_peel = policy_peeling(phase); // Should we peel?
2274 bool should_unswitch = policy_unswitching(phase);
2276 // Non-counted loops may be peeled; exactly 1 iteration is peeled.
2277 // This removes loop-invariant tests (usually null checks).
2278 if (!_head->is_CountedLoop()) { // Non-counted loop
2279 if (PartialPeelLoop && phase->partial_peel(this, old_new)) {
2280 // Partial peel succeeded so terminate this round of loop opts
2281 return false;
2282 }
2283 if (should_peel) { // Should we peel?
2284 #ifndef PRODUCT
2285 if (PrintOpto) tty->print_cr("should_peel");
2286 #endif
2287 phase->do_peeling(this,old_new);
2288 } else if (should_unswitch) {
2289 phase->do_unswitching(this, old_new);
2290 }
2291 return true;
2292 }
2293 CountedLoopNode *cl = _head->as_CountedLoop();
2295 if (!cl->is_valid_counted_loop()) return true; // Ignore various kinds of broken loops
2297 // Do nothing special to pre- and post- loops
2298 if (cl->is_pre_loop() || cl->is_post_loop()) return true;
2300 // Compute loop trip count from profile data
2301 compute_profile_trip_cnt(phase);
2303 // Before attempting fancy unrolling, RCE or alignment, see if we want
2304 // to completely unroll this loop or do loop unswitching.
2305 if (cl->is_normal_loop()) {
2306 if (should_unswitch) {
2307 phase->do_unswitching(this, old_new);
2308 return true;
2309 }
2310 bool should_maximally_unroll = policy_maximally_unroll(phase);
2311 if (should_maximally_unroll) {
2312 // Here we did some unrolling and peeling. Eventually we will
2313 // completely unroll this loop and it will no longer be a loop.
2314 phase->do_maximally_unroll(this,old_new);
2315 return true;
2316 }
2317 }
2319 // Skip next optimizations if running low on nodes. Note that
2320 // policy_unswitching and policy_maximally_unroll have this check.
2321 int nodes_left = phase->C->max_node_limit() - phase->C->live_nodes();
2322 if ((int)(2 * _body.size()) > nodes_left) {
2323 return true;
2324 }
2326 // Counted loops may be peeled, may need some iterations run up
2327 // front for RCE, and may want to align loop refs to a cache
2328 // line. Thus we clone a full loop up front whose trip count is
2329 // at least 1 (if peeling), but may be several more.
2331 // The main loop will start cache-line aligned with at least 1
2332 // iteration of the unrolled body (zero-trip test required) and
2333 // will have some range checks removed.
2335 // A post-loop will finish any odd iterations (leftover after
2336 // unrolling), plus any needed for RCE purposes.
2338 bool should_unroll = policy_unroll(phase);
2340 bool should_rce = policy_range_check(phase);
2342 bool should_align = policy_align(phase);
2344 // If not RCE'ing (iteration splitting) or Aligning, then we do not
2345 // need a pre-loop. We may still need to peel an initial iteration but
2346 // we will not be needing an unknown number of pre-iterations.
2347 //
2348 // Basically, if may_rce_align reports FALSE first time through,
2349 // we will not be able to later do RCE or Aligning on this loop.
2350 bool may_rce_align = !policy_peel_only(phase) || should_rce || should_align;
2352 // If we have any of these conditions (RCE, alignment, unrolling) met, then
2353 // we switch to the pre-/main-/post-loop model. This model also covers
2354 // peeling.
2355 if (should_rce || should_align || should_unroll) {
2356 if (cl->is_normal_loop()) // Convert to 'pre/main/post' loops
2357 phase->insert_pre_post_loops(this,old_new, !may_rce_align);
2359 // Adjust the pre- and main-loop limits to let the pre and post loops run
2360 // with full checks, but the main-loop with no checks. Remove said
2361 // checks from the main body.
2362 if (should_rce)
2363 phase->do_range_check(this,old_new);
2365 // Double loop body for unrolling. Adjust the minimum-trip test (will do
2366 // twice as many iterations as before) and the main body limit (only do
2367 // an even number of trips). If we are peeling, we might enable some RCE
2368 // and we'd rather unroll the post-RCE'd loop SO... do not unroll if
2369 // peeling.
2370 if (should_unroll && !should_peel)
2371 phase->do_unroll(this,old_new, true);
2373 // Adjust the pre-loop limits to align the main body
2374 // iterations.
2375 if (should_align)
2376 Unimplemented();
2378 } else { // Else we have an unchanged counted loop
2379 if (should_peel) // Might want to peel but do nothing else
2380 phase->do_peeling(this,old_new);
2381 }
2382 return true;
2383 }
2386 //=============================================================================
2387 //------------------------------iteration_split--------------------------------
2388 bool IdealLoopTree::iteration_split( PhaseIdealLoop *phase, Node_List &old_new ) {
2389 // Recursively iteration split nested loops
2390 if (_child && !_child->iteration_split(phase, old_new))
2391 return false;
2393 // Clean out prior deadwood
2394 DCE_loop_body();
2397 // Look for loop-exit tests with my 50/50 guesses from the Parsing stage.
2398 // Replace with a 1-in-10 exit guess.
2399 if (_parent /*not the root loop*/ &&
2400 !_irreducible &&
2401 // Also ignore the occasional dead backedge
2402 !tail()->is_top()) {
2403 adjust_loop_exit_prob(phase);
2404 }
2406 // Gate unrolling, RCE and peeling efforts.
2407 if (!_child && // If not an inner loop, do not split
2408 !_irreducible &&
2409 _allow_optimizations &&
2410 !tail()->is_top()) { // Also ignore the occasional dead backedge
2411 if (!_has_call) {
2412 if (!iteration_split_impl(phase, old_new)) {
2413 return false;
2414 }
2415 } else if (policy_unswitching(phase)) {
2416 phase->do_unswitching(this, old_new);
2417 }
2418 }
2420 // Minor offset re-organization to remove loop-fallout uses of
2421 // trip counter when there was no major reshaping.
2422 phase->reorg_offsets(this);
2424 if (_next && !_next->iteration_split(phase, old_new))
2425 return false;
2426 return true;
2427 }
2430 //=============================================================================
2431 // Process all the loops in the loop tree and replace any fill
2432 // patterns with an intrisc version.
2433 bool PhaseIdealLoop::do_intrinsify_fill() {
2434 bool changed = false;
2435 for (LoopTreeIterator iter(_ltree_root); !iter.done(); iter.next()) {
2436 IdealLoopTree* lpt = iter.current();
2437 changed |= intrinsify_fill(lpt);
2438 }
2439 return changed;
2440 }
2443 // Examine an inner loop looking for a a single store of an invariant
2444 // value in a unit stride loop,
2445 bool PhaseIdealLoop::match_fill_loop(IdealLoopTree* lpt, Node*& store, Node*& store_value,
2446 Node*& shift, Node*& con) {
2447 const char* msg = NULL;
2448 Node* msg_node = NULL;
2450 store_value = NULL;
2451 con = NULL;
2452 shift = NULL;
2454 // Process the loop looking for stores. If there are multiple
2455 // stores or extra control flow give at this point.
2456 CountedLoopNode* head = lpt->_head->as_CountedLoop();
2457 for (uint i = 0; msg == NULL && i < lpt->_body.size(); i++) {
2458 Node* n = lpt->_body.at(i);
2459 if (n->outcnt() == 0) continue; // Ignore dead
2460 if (n->is_Store()) {
2461 if (store != NULL) {
2462 msg = "multiple stores";
2463 break;
2464 }
2465 int opc = n->Opcode();
2466 if (opc == Op_StoreP || opc == Op_StoreN || opc == Op_StoreNKlass || opc == Op_StoreCM) {
2467 msg = "oop fills not handled";
2468 break;
2469 }
2470 Node* value = n->in(MemNode::ValueIn);
2471 if (!lpt->is_invariant(value)) {
2472 msg = "variant store value";
2473 } else if (!_igvn.type(n->in(MemNode::Address))->isa_aryptr()) {
2474 msg = "not array address";
2475 }
2476 store = n;
2477 store_value = value;
2478 } else if (n->is_If() && n != head->loopexit()) {
2479 msg = "extra control flow";
2480 msg_node = n;
2481 }
2482 }
2484 if (store == NULL) {
2485 // No store in loop
2486 return false;
2487 }
2489 if (msg == NULL && head->stride_con() != 1) {
2490 // could handle negative strides too
2491 if (head->stride_con() < 0) {
2492 msg = "negative stride";
2493 } else {
2494 msg = "non-unit stride";
2495 }
2496 }
2498 if (msg == NULL && !store->in(MemNode::Address)->is_AddP()) {
2499 msg = "can't handle store address";
2500 msg_node = store->in(MemNode::Address);
2501 }
2503 if (msg == NULL &&
2504 (!store->in(MemNode::Memory)->is_Phi() ||
2505 store->in(MemNode::Memory)->in(LoopNode::LoopBackControl) != store)) {
2506 msg = "store memory isn't proper phi";
2507 msg_node = store->in(MemNode::Memory);
2508 }
2510 // Make sure there is an appropriate fill routine
2511 BasicType t = store->as_Mem()->memory_type();
2512 const char* fill_name;
2513 if (msg == NULL &&
2514 StubRoutines::select_fill_function(t, false, fill_name) == NULL) {
2515 msg = "unsupported store";
2516 msg_node = store;
2517 }
2519 if (msg != NULL) {
2520 #ifndef PRODUCT
2521 if (TraceOptimizeFill) {
2522 tty->print_cr("not fill intrinsic candidate: %s", msg);
2523 if (msg_node != NULL) msg_node->dump();
2524 }
2525 #endif
2526 return false;
2527 }
2529 // Make sure the address expression can be handled. It should be
2530 // head->phi * elsize + con. head->phi might have a ConvI2L.
2531 Node* elements[4];
2532 Node* conv = NULL;
2533 bool found_index = false;
2534 int count = store->in(MemNode::Address)->as_AddP()->unpack_offsets(elements, ARRAY_SIZE(elements));
2535 for (int e = 0; e < count; e++) {
2536 Node* n = elements[e];
2537 if (n->is_Con() && con == NULL) {
2538 con = n;
2539 } else if (n->Opcode() == Op_LShiftX && shift == NULL) {
2540 Node* value = n->in(1);
2541 #ifdef _LP64
2542 if (value->Opcode() == Op_ConvI2L) {
2543 conv = value;
2544 value = value->in(1);
2545 }
2546 #endif
2547 if (value != head->phi()) {
2548 msg = "unhandled shift in address";
2549 } else {
2550 if (type2aelembytes(store->as_Mem()->memory_type(), true) != (1 << n->in(2)->get_int())) {
2551 msg = "scale doesn't match";
2552 } else {
2553 found_index = true;
2554 shift = n;
2555 }
2556 }
2557 } else if (n->Opcode() == Op_ConvI2L && conv == NULL) {
2558 if (n->in(1) == head->phi()) {
2559 found_index = true;
2560 conv = n;
2561 } else {
2562 msg = "unhandled input to ConvI2L";
2563 }
2564 } else if (n == head->phi()) {
2565 // no shift, check below for allowed cases
2566 found_index = true;
2567 } else {
2568 msg = "unhandled node in address";
2569 msg_node = n;
2570 }
2571 }
2573 if (count == -1) {
2574 msg = "malformed address expression";
2575 msg_node = store;
2576 }
2578 if (!found_index) {
2579 msg = "missing use of index";
2580 }
2582 // byte sized items won't have a shift
2583 if (msg == NULL && shift == NULL && t != T_BYTE && t != T_BOOLEAN) {
2584 msg = "can't find shift";
2585 msg_node = store;
2586 }
2588 if (msg != NULL) {
2589 #ifndef PRODUCT
2590 if (TraceOptimizeFill) {
2591 tty->print_cr("not fill intrinsic: %s", msg);
2592 if (msg_node != NULL) msg_node->dump();
2593 }
2594 #endif
2595 return false;
2596 }
2598 // No make sure all the other nodes in the loop can be handled
2599 VectorSet ok(Thread::current()->resource_area());
2601 // store related values are ok
2602 ok.set(store->_idx);
2603 ok.set(store->in(MemNode::Memory)->_idx);
2605 CountedLoopEndNode* loop_exit = head->loopexit();
2606 guarantee(loop_exit != NULL, "no loop exit node");
2608 // Loop structure is ok
2609 ok.set(head->_idx);
2610 ok.set(loop_exit->_idx);
2611 ok.set(head->phi()->_idx);
2612 ok.set(head->incr()->_idx);
2613 ok.set(loop_exit->cmp_node()->_idx);
2614 ok.set(loop_exit->in(1)->_idx);
2616 // Address elements are ok
2617 if (con) ok.set(con->_idx);
2618 if (shift) ok.set(shift->_idx);
2619 if (conv) ok.set(conv->_idx);
2621 for (uint i = 0; msg == NULL && i < lpt->_body.size(); i++) {
2622 Node* n = lpt->_body.at(i);
2623 if (n->outcnt() == 0) continue; // Ignore dead
2624 if (ok.test(n->_idx)) continue;
2625 // Backedge projection is ok
2626 if (n->is_IfTrue() && n->in(0) == loop_exit) continue;
2627 if (!n->is_AddP()) {
2628 msg = "unhandled node";
2629 msg_node = n;
2630 break;
2631 }
2632 }
2634 // Make sure no unexpected values are used outside the loop
2635 for (uint i = 0; msg == NULL && i < lpt->_body.size(); i++) {
2636 Node* n = lpt->_body.at(i);
2637 // These values can be replaced with other nodes if they are used
2638 // outside the loop.
2639 if (n == store || n == loop_exit || n == head->incr() || n == store->in(MemNode::Memory)) continue;
2640 for (SimpleDUIterator iter(n); iter.has_next(); iter.next()) {
2641 Node* use = iter.get();
2642 if (!lpt->_body.contains(use)) {
2643 msg = "node is used outside loop";
2644 // lpt->_body.dump();
2645 msg_node = n;
2646 break;
2647 }
2648 }
2649 }
2651 #ifdef ASSERT
2652 if (TraceOptimizeFill) {
2653 if (msg != NULL) {
2654 tty->print_cr("no fill intrinsic: %s", msg);
2655 if (msg_node != NULL) msg_node->dump();
2656 } else {
2657 tty->print_cr("fill intrinsic for:");
2658 }
2659 store->dump();
2660 if (Verbose) {
2661 lpt->_body.dump();
2662 }
2663 }
2664 #endif
2666 return msg == NULL;
2667 }
2671 bool PhaseIdealLoop::intrinsify_fill(IdealLoopTree* lpt) {
2672 // Only for counted inner loops
2673 if (!lpt->is_counted() || !lpt->is_inner()) {
2674 return false;
2675 }
2677 // Must have constant stride
2678 CountedLoopNode* head = lpt->_head->as_CountedLoop();
2679 if (!head->is_valid_counted_loop() || !head->is_normal_loop()) {
2680 return false;
2681 }
2683 // Check that the body only contains a store of a loop invariant
2684 // value that is indexed by the loop phi.
2685 Node* store = NULL;
2686 Node* store_value = NULL;
2687 Node* shift = NULL;
2688 Node* offset = NULL;
2689 if (!match_fill_loop(lpt, store, store_value, shift, offset)) {
2690 return false;
2691 }
2693 #ifndef PRODUCT
2694 if (TraceLoopOpts) {
2695 tty->print("ArrayFill ");
2696 lpt->dump_head();
2697 }
2698 #endif
2700 // Now replace the whole loop body by a call to a fill routine that
2701 // covers the same region as the loop.
2702 Node* base = store->in(MemNode::Address)->as_AddP()->in(AddPNode::Base);
2704 // Build an expression for the beginning of the copy region
2705 Node* index = head->init_trip();
2706 #ifdef _LP64
2707 index = new (C) ConvI2LNode(index);
2708 _igvn.register_new_node_with_optimizer(index);
2709 #endif
2710 if (shift != NULL) {
2711 // byte arrays don't require a shift but others do.
2712 index = new (C) LShiftXNode(index, shift->in(2));
2713 _igvn.register_new_node_with_optimizer(index);
2714 }
2715 index = new (C) AddPNode(base, base, index);
2716 _igvn.register_new_node_with_optimizer(index);
2717 Node* from = new (C) AddPNode(base, index, offset);
2718 _igvn.register_new_node_with_optimizer(from);
2719 // Compute the number of elements to copy
2720 Node* len = new (C) SubINode(head->limit(), head->init_trip());
2721 _igvn.register_new_node_with_optimizer(len);
2723 BasicType t = store->as_Mem()->memory_type();
2724 bool aligned = false;
2725 if (offset != NULL && head->init_trip()->is_Con()) {
2726 int element_size = type2aelembytes(t);
2727 aligned = (offset->find_intptr_t_type()->get_con() + head->init_trip()->get_int() * element_size) % HeapWordSize == 0;
2728 }
2730 // Build a call to the fill routine
2731 const char* fill_name;
2732 address fill = StubRoutines::select_fill_function(t, aligned, fill_name);
2733 assert(fill != NULL, "what?");
2735 // Convert float/double to int/long for fill routines
2736 if (t == T_FLOAT) {
2737 store_value = new (C) MoveF2INode(store_value);
2738 _igvn.register_new_node_with_optimizer(store_value);
2739 } else if (t == T_DOUBLE) {
2740 store_value = new (C) MoveD2LNode(store_value);
2741 _igvn.register_new_node_with_optimizer(store_value);
2742 }
2744 if (CCallingConventionRequiresIntsAsLongs &&
2745 // See StubRoutines::select_fill_function for types. FLOAT has been converted to INT.
2746 (t == T_FLOAT || t == T_INT || is_subword_type(t))) {
2747 store_value = new (C) ConvI2LNode(store_value);
2748 _igvn.register_new_node_with_optimizer(store_value);
2749 }
2751 Node* mem_phi = store->in(MemNode::Memory);
2752 Node* result_ctrl;
2753 Node* result_mem;
2754 const TypeFunc* call_type = OptoRuntime::array_fill_Type();
2755 CallLeafNode *call = new (C) CallLeafNoFPNode(call_type, fill,
2756 fill_name, TypeAryPtr::get_array_body_type(t));
2757 uint cnt = 0;
2758 call->init_req(TypeFunc::Parms + cnt++, from);
2759 call->init_req(TypeFunc::Parms + cnt++, store_value);
2760 if (CCallingConventionRequiresIntsAsLongs) {
2761 call->init_req(TypeFunc::Parms + cnt++, C->top());
2762 }
2763 #ifdef _LP64
2764 len = new (C) ConvI2LNode(len);
2765 _igvn.register_new_node_with_optimizer(len);
2766 #endif
2767 call->init_req(TypeFunc::Parms + cnt++, len);
2768 #ifdef _LP64
2769 call->init_req(TypeFunc::Parms + cnt++, C->top());
2770 #endif
2771 call->init_req(TypeFunc::Control, head->init_control());
2772 call->init_req(TypeFunc::I_O, C->top()); // Does no I/O.
2773 call->init_req(TypeFunc::Memory, mem_phi->in(LoopNode::EntryControl));
2774 call->init_req(TypeFunc::ReturnAdr, C->start()->proj_out(TypeFunc::ReturnAdr));
2775 call->init_req(TypeFunc::FramePtr, C->start()->proj_out(TypeFunc::FramePtr));
2776 _igvn.register_new_node_with_optimizer(call);
2777 result_ctrl = new (C) ProjNode(call,TypeFunc::Control);
2778 _igvn.register_new_node_with_optimizer(result_ctrl);
2779 result_mem = new (C) ProjNode(call,TypeFunc::Memory);
2780 _igvn.register_new_node_with_optimizer(result_mem);
2782 /* Disable following optimization until proper fix (add missing checks).
2784 // If this fill is tightly coupled to an allocation and overwrites
2785 // the whole body, allow it to take over the zeroing.
2786 AllocateNode* alloc = AllocateNode::Ideal_allocation(base, this);
2787 if (alloc != NULL && alloc->is_AllocateArray()) {
2788 Node* length = alloc->as_AllocateArray()->Ideal_length();
2789 if (head->limit() == length &&
2790 head->init_trip() == _igvn.intcon(0)) {
2791 if (TraceOptimizeFill) {
2792 tty->print_cr("Eliminated zeroing in allocation");
2793 }
2794 alloc->maybe_set_complete(&_igvn);
2795 } else {
2796 #ifdef ASSERT
2797 if (TraceOptimizeFill) {
2798 tty->print_cr("filling array but bounds don't match");
2799 alloc->dump();
2800 head->init_trip()->dump();
2801 head->limit()->dump();
2802 length->dump();
2803 }
2804 #endif
2805 }
2806 }
2807 */
2809 // Redirect the old control and memory edges that are outside the loop.
2810 Node* exit = head->loopexit()->proj_out(0);
2811 // Sometimes the memory phi of the head is used as the outgoing
2812 // state of the loop. It's safe in this case to replace it with the
2813 // result_mem.
2814 _igvn.replace_node(store->in(MemNode::Memory), result_mem);
2815 _igvn.replace_node(exit, result_ctrl);
2816 _igvn.replace_node(store, result_mem);
2817 // Any uses the increment outside of the loop become the loop limit.
2818 _igvn.replace_node(head->incr(), head->limit());
2820 // Disconnect the head from the loop.
2821 for (uint i = 0; i < lpt->_body.size(); i++) {
2822 Node* n = lpt->_body.at(i);
2823 _igvn.replace_node(n, C->top());
2824 }
2826 return true;
2827 }