Thu, 07 Oct 2010 21:40:55 -0700
6980792: Crash "exception happened outside interpreter, nmethods and vtable stubs (1)"
Reviewed-by: kvn
1 /*
2 * Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "incls/_precompiled.incl"
26 #include "incls/_output.cpp.incl"
28 extern uint size_java_to_interp();
29 extern uint reloc_java_to_interp();
30 extern uint size_exception_handler();
31 extern uint size_deopt_handler();
33 #ifndef PRODUCT
34 #define DEBUG_ARG(x) , x
35 #else
36 #define DEBUG_ARG(x)
37 #endif
39 extern int emit_exception_handler(CodeBuffer &cbuf);
40 extern int emit_deopt_handler(CodeBuffer &cbuf);
42 //------------------------------Output-----------------------------------------
43 // Convert Nodes to instruction bits and pass off to the VM
44 void Compile::Output() {
45 // RootNode goes
46 assert( _cfg->_broot->_nodes.size() == 0, "" );
48 // Initialize the space for the BufferBlob used to find and verify
49 // instruction size in MachNode::emit_size()
50 init_scratch_buffer_blob();
51 if (failing()) return; // Out of memory
53 // The number of new nodes (mostly MachNop) is proportional to
54 // the number of java calls and inner loops which are aligned.
55 if ( C->check_node_count((NodeLimitFudgeFactor + C->java_calls()*3 +
56 C->inner_loops()*(OptoLoopAlignment-1)),
57 "out of nodes before code generation" ) ) {
58 return;
59 }
60 // Make sure I can find the Start Node
61 Block_Array& bbs = _cfg->_bbs;
62 Block *entry = _cfg->_blocks[1];
63 Block *broot = _cfg->_broot;
65 const StartNode *start = entry->_nodes[0]->as_Start();
67 // Replace StartNode with prolog
68 MachPrologNode *prolog = new (this) MachPrologNode();
69 entry->_nodes.map( 0, prolog );
70 bbs.map( prolog->_idx, entry );
71 bbs.map( start->_idx, NULL ); // start is no longer in any block
73 // Virtual methods need an unverified entry point
75 if( is_osr_compilation() ) {
76 if( PoisonOSREntry ) {
77 // TODO: Should use a ShouldNotReachHereNode...
78 _cfg->insert( broot, 0, new (this) MachBreakpointNode() );
79 }
80 } else {
81 if( _method && !_method->flags().is_static() ) {
82 // Insert unvalidated entry point
83 _cfg->insert( broot, 0, new (this) MachUEPNode() );
84 }
86 }
89 // Break before main entry point
90 if( (_method && _method->break_at_execute())
91 #ifndef PRODUCT
92 ||(OptoBreakpoint && is_method_compilation())
93 ||(OptoBreakpointOSR && is_osr_compilation())
94 ||(OptoBreakpointC2R && !_method)
95 #endif
96 ) {
97 // checking for _method means that OptoBreakpoint does not apply to
98 // runtime stubs or frame converters
99 _cfg->insert( entry, 1, new (this) MachBreakpointNode() );
100 }
102 // Insert epilogs before every return
103 for( uint i=0; i<_cfg->_num_blocks; i++ ) {
104 Block *b = _cfg->_blocks[i];
105 if( !b->is_connector() && b->non_connector_successor(0) == _cfg->_broot ) { // Found a program exit point?
106 Node *m = b->end();
107 if( m->is_Mach() && m->as_Mach()->ideal_Opcode() != Op_Halt ) {
108 MachEpilogNode *epilog = new (this) MachEpilogNode(m->as_Mach()->ideal_Opcode() == Op_Return);
109 b->add_inst( epilog );
110 bbs.map(epilog->_idx, b);
111 //_regalloc->set_bad(epilog->_idx); // Already initialized this way.
112 }
113 }
114 }
116 # ifdef ENABLE_ZAP_DEAD_LOCALS
117 if ( ZapDeadCompiledLocals ) Insert_zap_nodes();
118 # endif
120 ScheduleAndBundle();
122 #ifndef PRODUCT
123 if (trace_opto_output()) {
124 tty->print("\n---- After ScheduleAndBundle ----\n");
125 for (uint i = 0; i < _cfg->_num_blocks; i++) {
126 tty->print("\nBB#%03d:\n", i);
127 Block *bb = _cfg->_blocks[i];
128 for (uint j = 0; j < bb->_nodes.size(); j++) {
129 Node *n = bb->_nodes[j];
130 OptoReg::Name reg = _regalloc->get_reg_first(n);
131 tty->print(" %-6s ", reg >= 0 && reg < REG_COUNT ? Matcher::regName[reg] : "");
132 n->dump();
133 }
134 }
135 }
136 #endif
138 if (failing()) return;
140 BuildOopMaps();
142 if (failing()) return;
144 Fill_buffer();
145 }
147 bool Compile::need_stack_bang(int frame_size_in_bytes) const {
148 // Determine if we need to generate a stack overflow check.
149 // Do it if the method is not a stub function and
150 // has java calls or has frame size > vm_page_size/8.
151 return (stub_function() == NULL &&
152 (has_java_calls() || frame_size_in_bytes > os::vm_page_size()>>3));
153 }
155 bool Compile::need_register_stack_bang() const {
156 // Determine if we need to generate a register stack overflow check.
157 // This is only used on architectures which have split register
158 // and memory stacks (ie. IA64).
159 // Bang if the method is not a stub function and has java calls
160 return (stub_function() == NULL && has_java_calls());
161 }
163 # ifdef ENABLE_ZAP_DEAD_LOCALS
166 // In order to catch compiler oop-map bugs, we have implemented
167 // a debugging mode called ZapDeadCompilerLocals.
168 // This mode causes the compiler to insert a call to a runtime routine,
169 // "zap_dead_locals", right before each place in compiled code
170 // that could potentially be a gc-point (i.e., a safepoint or oop map point).
171 // The runtime routine checks that locations mapped as oops are really
172 // oops, that locations mapped as values do not look like oops,
173 // and that locations mapped as dead are not used later
174 // (by zapping them to an invalid address).
176 int Compile::_CompiledZap_count = 0;
178 void Compile::Insert_zap_nodes() {
179 bool skip = false;
182 // Dink with static counts because code code without the extra
183 // runtime calls is MUCH faster for debugging purposes
185 if ( CompileZapFirst == 0 ) ; // nothing special
186 else if ( CompileZapFirst > CompiledZap_count() ) skip = true;
187 else if ( CompileZapFirst == CompiledZap_count() )
188 warning("starting zap compilation after skipping");
190 if ( CompileZapLast == -1 ) ; // nothing special
191 else if ( CompileZapLast < CompiledZap_count() ) skip = true;
192 else if ( CompileZapLast == CompiledZap_count() )
193 warning("about to compile last zap");
195 ++_CompiledZap_count; // counts skipped zaps, too
197 if ( skip ) return;
200 if ( _method == NULL )
201 return; // no safepoints/oopmaps emitted for calls in stubs,so we don't care
203 // Insert call to zap runtime stub before every node with an oop map
204 for( uint i=0; i<_cfg->_num_blocks; i++ ) {
205 Block *b = _cfg->_blocks[i];
206 for ( uint j = 0; j < b->_nodes.size(); ++j ) {
207 Node *n = b->_nodes[j];
209 // Determining if we should insert a zap-a-lot node in output.
210 // We do that for all nodes that has oopmap info, except for calls
211 // to allocation. Calls to allocation passes in the old top-of-eden pointer
212 // and expect the C code to reset it. Hence, there can be no safepoints between
213 // the inlined-allocation and the call to new_Java, etc.
214 // We also cannot zap monitor calls, as they must hold the microlock
215 // during the call to Zap, which also wants to grab the microlock.
216 bool insert = n->is_MachSafePoint() && (n->as_MachSafePoint()->oop_map() != NULL);
217 if ( insert ) { // it is MachSafePoint
218 if ( !n->is_MachCall() ) {
219 insert = false;
220 } else if ( n->is_MachCall() ) {
221 MachCallNode* call = n->as_MachCall();
222 if (call->entry_point() == OptoRuntime::new_instance_Java() ||
223 call->entry_point() == OptoRuntime::new_array_Java() ||
224 call->entry_point() == OptoRuntime::multianewarray2_Java() ||
225 call->entry_point() == OptoRuntime::multianewarray3_Java() ||
226 call->entry_point() == OptoRuntime::multianewarray4_Java() ||
227 call->entry_point() == OptoRuntime::multianewarray5_Java() ||
228 call->entry_point() == OptoRuntime::slow_arraycopy_Java() ||
229 call->entry_point() == OptoRuntime::complete_monitor_locking_Java()
230 ) {
231 insert = false;
232 }
233 }
234 if (insert) {
235 Node *zap = call_zap_node(n->as_MachSafePoint(), i);
236 b->_nodes.insert( j, zap );
237 _cfg->_bbs.map( zap->_idx, b );
238 ++j;
239 }
240 }
241 }
242 }
243 }
246 Node* Compile::call_zap_node(MachSafePointNode* node_to_check, int block_no) {
247 const TypeFunc *tf = OptoRuntime::zap_dead_locals_Type();
248 CallStaticJavaNode* ideal_node =
249 new (this, tf->domain()->cnt()) CallStaticJavaNode( tf,
250 OptoRuntime::zap_dead_locals_stub(_method->flags().is_native()),
251 "call zap dead locals stub", 0, TypePtr::BOTTOM);
252 // We need to copy the OopMap from the site we're zapping at.
253 // We have to make a copy, because the zap site might not be
254 // a call site, and zap_dead is a call site.
255 OopMap* clone = node_to_check->oop_map()->deep_copy();
257 // Add the cloned OopMap to the zap node
258 ideal_node->set_oop_map(clone);
259 return _matcher->match_sfpt(ideal_node);
260 }
262 //------------------------------is_node_getting_a_safepoint--------------------
263 bool Compile::is_node_getting_a_safepoint( Node* n) {
264 // This code duplicates the logic prior to the call of add_safepoint
265 // below in this file.
266 if( n->is_MachSafePoint() ) return true;
267 return false;
268 }
270 # endif // ENABLE_ZAP_DEAD_LOCALS
272 //------------------------------compute_loop_first_inst_sizes------------------
273 // Compute the size of first NumberOfLoopInstrToAlign instructions at the top
274 // of a loop. When aligning a loop we need to provide enough instructions
275 // in cpu's fetch buffer to feed decoders. The loop alignment could be
276 // avoided if we have enough instructions in fetch buffer at the head of a loop.
277 // By default, the size is set to 999999 by Block's constructor so that
278 // a loop will be aligned if the size is not reset here.
279 //
280 // Note: Mach instructions could contain several HW instructions
281 // so the size is estimated only.
282 //
283 void Compile::compute_loop_first_inst_sizes() {
284 // The next condition is used to gate the loop alignment optimization.
285 // Don't aligned a loop if there are enough instructions at the head of a loop
286 // or alignment padding is larger then MaxLoopPad. By default, MaxLoopPad
287 // is equal to OptoLoopAlignment-1 except on new Intel cpus, where it is
288 // equal to 11 bytes which is the largest address NOP instruction.
289 if( MaxLoopPad < OptoLoopAlignment-1 ) {
290 uint last_block = _cfg->_num_blocks-1;
291 for( uint i=1; i <= last_block; i++ ) {
292 Block *b = _cfg->_blocks[i];
293 // Check the first loop's block which requires an alignment.
294 if( b->loop_alignment() > (uint)relocInfo::addr_unit() ) {
295 uint sum_size = 0;
296 uint inst_cnt = NumberOfLoopInstrToAlign;
297 inst_cnt = b->compute_first_inst_size(sum_size, inst_cnt, _regalloc);
299 // Check subsequent fallthrough blocks if the loop's first
300 // block(s) does not have enough instructions.
301 Block *nb = b;
302 while( inst_cnt > 0 &&
303 i < last_block &&
304 !_cfg->_blocks[i+1]->has_loop_alignment() &&
305 !nb->has_successor(b) ) {
306 i++;
307 nb = _cfg->_blocks[i];
308 inst_cnt = nb->compute_first_inst_size(sum_size, inst_cnt, _regalloc);
309 } // while( inst_cnt > 0 && i < last_block )
311 b->set_first_inst_size(sum_size);
312 } // f( b->head()->is_Loop() )
313 } // for( i <= last_block )
314 } // if( MaxLoopPad < OptoLoopAlignment-1 )
315 }
317 //----------------------Shorten_branches---------------------------------------
318 // The architecture description provides short branch variants for some long
319 // branch instructions. Replace eligible long branches with short branches.
320 void Compile::Shorten_branches(Label *labels, int& code_size, int& reloc_size, int& stub_size, int& const_size) {
322 // fill in the nop array for bundling computations
323 MachNode *_nop_list[Bundle::_nop_count];
324 Bundle::initialize_nops(_nop_list, this);
326 // ------------------
327 // Compute size of each block, method size, and relocation information size
328 uint *jmp_end = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks);
329 uint *blk_starts = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks+1);
330 DEBUG_ONLY( uint *jmp_target = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks); )
331 DEBUG_ONLY( uint *jmp_rule = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks); )
332 blk_starts[0] = 0;
334 // Initialize the sizes to 0
335 code_size = 0; // Size in bytes of generated code
336 stub_size = 0; // Size in bytes of all stub entries
337 // Size in bytes of all relocation entries, including those in local stubs.
338 // Start with 2-bytes of reloc info for the unvalidated entry point
339 reloc_size = 1; // Number of relocation entries
340 const_size = 0; // size of fp constants in words
342 // Make three passes. The first computes pessimistic blk_starts,
343 // relative jmp_end, reloc_size and const_size information.
344 // The second performs short branch substitution using the pessimistic
345 // sizing. The third inserts nops where needed.
347 Node *nj; // tmp
349 // Step one, perform a pessimistic sizing pass.
350 uint i;
351 uint min_offset_from_last_call = 1; // init to a positive value
352 uint nop_size = (new (this) MachNopNode())->size(_regalloc);
353 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks
354 Block *b = _cfg->_blocks[i];
356 // Sum all instruction sizes to compute block size
357 uint last_inst = b->_nodes.size();
358 uint blk_size = 0;
359 for( uint j = 0; j<last_inst; j++ ) {
360 nj = b->_nodes[j];
361 uint inst_size = nj->size(_regalloc);
362 blk_size += inst_size;
363 // Handle machine instruction nodes
364 if( nj->is_Mach() ) {
365 MachNode *mach = nj->as_Mach();
366 blk_size += (mach->alignment_required() - 1) * relocInfo::addr_unit(); // assume worst case padding
367 reloc_size += mach->reloc();
368 const_size += mach->const_size();
369 if( mach->is_MachCall() ) {
370 MachCallNode *mcall = mach->as_MachCall();
371 // This destination address is NOT PC-relative
373 mcall->method_set((intptr_t)mcall->entry_point());
375 if( mcall->is_MachCallJava() && mcall->as_MachCallJava()->_method ) {
376 stub_size += size_java_to_interp();
377 reloc_size += reloc_java_to_interp();
378 }
379 } else if (mach->is_MachSafePoint()) {
380 // If call/safepoint are adjacent, account for possible
381 // nop to disambiguate the two safepoints.
382 if (min_offset_from_last_call == 0) {
383 blk_size += nop_size;
384 }
385 } else if (mach->ideal_Opcode() == Op_Jump) {
386 const_size += b->_num_succs; // Address table size
387 // The size is valid even for 64 bit since it is
388 // multiplied by 2*jintSize on this method exit.
389 }
390 }
391 min_offset_from_last_call += inst_size;
392 // Remember end of call offset
393 if (nj->is_MachCall() && nj->as_MachCall()->is_safepoint_node()) {
394 min_offset_from_last_call = 0;
395 }
396 }
398 // During short branch replacement, we store the relative (to blk_starts)
399 // end of jump in jmp_end, rather than the absolute end of jump. This
400 // is so that we do not need to recompute sizes of all nodes when we compute
401 // correct blk_starts in our next sizing pass.
402 jmp_end[i] = blk_size;
403 DEBUG_ONLY( jmp_target[i] = 0; )
405 // When the next block starts a loop, we may insert pad NOP
406 // instructions. Since we cannot know our future alignment,
407 // assume the worst.
408 if( i<_cfg->_num_blocks-1 ) {
409 Block *nb = _cfg->_blocks[i+1];
410 int max_loop_pad = nb->code_alignment()-relocInfo::addr_unit();
411 if( max_loop_pad > 0 ) {
412 assert(is_power_of_2(max_loop_pad+relocInfo::addr_unit()), "");
413 blk_size += max_loop_pad;
414 }
415 }
417 // Save block size; update total method size
418 blk_starts[i+1] = blk_starts[i]+blk_size;
419 }
421 // Step two, replace eligible long jumps.
423 // Note: this will only get the long branches within short branch
424 // range. Another pass might detect more branches that became
425 // candidates because the shortening in the first pass exposed
426 // more opportunities. Unfortunately, this would require
427 // recomputing the starting and ending positions for the blocks
428 for( i=0; i<_cfg->_num_blocks; i++ ) {
429 Block *b = _cfg->_blocks[i];
431 int j;
432 // Find the branch; ignore trailing NOPs.
433 for( j = b->_nodes.size()-1; j>=0; j-- ) {
434 nj = b->_nodes[j];
435 if( !nj->is_Mach() || nj->as_Mach()->ideal_Opcode() != Op_Con )
436 break;
437 }
439 if (j >= 0) {
440 if( nj->is_Mach() && nj->as_Mach()->may_be_short_branch() ) {
441 MachNode *mach = nj->as_Mach();
442 // This requires the TRUE branch target be in succs[0]
443 uint bnum = b->non_connector_successor(0)->_pre_order;
444 uintptr_t target = blk_starts[bnum];
445 if( mach->is_pc_relative() ) {
446 int offset = target-(blk_starts[i] + jmp_end[i]);
447 if (_matcher->is_short_branch_offset(mach->rule(), offset)) {
448 // We've got a winner. Replace this branch.
449 MachNode* replacement = mach->short_branch_version(this);
450 b->_nodes.map(j, replacement);
451 mach->subsume_by(replacement);
453 // Update the jmp_end size to save time in our
454 // next pass.
455 jmp_end[i] -= (mach->size(_regalloc) - replacement->size(_regalloc));
456 DEBUG_ONLY( jmp_target[i] = bnum; );
457 DEBUG_ONLY( jmp_rule[i] = mach->rule(); );
458 }
459 } else {
460 #ifndef PRODUCT
461 mach->dump(3);
462 #endif
463 Unimplemented();
464 }
465 }
466 }
467 }
469 // Compute the size of first NumberOfLoopInstrToAlign instructions at head
470 // of a loop. It is used to determine the padding for loop alignment.
471 compute_loop_first_inst_sizes();
473 // Step 3, compute the offsets of all the labels
474 uint last_call_adr = max_uint;
475 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks
476 // copy the offset of the beginning to the corresponding label
477 assert(labels[i].is_unused(), "cannot patch at this point");
478 labels[i].bind_loc(blk_starts[i], CodeBuffer::SECT_INSTS);
480 // insert padding for any instructions that need it
481 Block *b = _cfg->_blocks[i];
482 uint last_inst = b->_nodes.size();
483 uint adr = blk_starts[i];
484 for( uint j = 0; j<last_inst; j++ ) {
485 nj = b->_nodes[j];
486 if( nj->is_Mach() ) {
487 int padding = nj->as_Mach()->compute_padding(adr);
488 // If call/safepoint are adjacent insert a nop (5010568)
489 if (padding == 0 && nj->is_MachSafePoint() && !nj->is_MachCall() &&
490 adr == last_call_adr ) {
491 padding = nop_size;
492 }
493 if(padding > 0) {
494 assert((padding % nop_size) == 0, "padding is not a multiple of NOP size");
495 int nops_cnt = padding / nop_size;
496 MachNode *nop = new (this) MachNopNode(nops_cnt);
497 b->_nodes.insert(j++, nop);
498 _cfg->_bbs.map( nop->_idx, b );
499 adr += padding;
500 last_inst++;
501 }
502 }
503 adr += nj->size(_regalloc);
505 // Remember end of call offset
506 if (nj->is_MachCall() && nj->as_MachCall()->is_safepoint_node()) {
507 last_call_adr = adr;
508 }
509 }
511 if ( i != _cfg->_num_blocks-1) {
512 // Get the size of the block
513 uint blk_size = adr - blk_starts[i];
515 // When the next block is the top of a loop, we may insert pad NOP
516 // instructions.
517 Block *nb = _cfg->_blocks[i+1];
518 int current_offset = blk_starts[i] + blk_size;
519 current_offset += nb->alignment_padding(current_offset);
520 // Save block size; update total method size
521 blk_starts[i+1] = current_offset;
522 }
523 }
525 #ifdef ASSERT
526 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks
527 if( jmp_target[i] != 0 ) {
528 int offset = blk_starts[jmp_target[i]]-(blk_starts[i] + jmp_end[i]);
529 if (!_matcher->is_short_branch_offset(jmp_rule[i], offset)) {
530 tty->print_cr("target (%d) - jmp_end(%d) = offset (%d), jmp_block B%d, target_block B%d", blk_starts[jmp_target[i]], blk_starts[i] + jmp_end[i], offset, i, jmp_target[i]);
531 }
532 assert(_matcher->is_short_branch_offset(jmp_rule[i], offset), "Displacement too large for short jmp");
533 }
534 }
535 #endif
537 // ------------------
538 // Compute size for code buffer
539 code_size = blk_starts[i-1] + jmp_end[i-1];
541 // Relocation records
542 reloc_size += 1; // Relo entry for exception handler
544 // Adjust reloc_size to number of record of relocation info
545 // Min is 2 bytes, max is probably 6 or 8, with a tax up to 25% for
546 // a relocation index.
547 // The CodeBuffer will expand the locs array if this estimate is too low.
548 reloc_size *= 10 / sizeof(relocInfo);
550 // Adjust const_size to number of bytes
551 const_size *= 2*jintSize; // both float and double take two words per entry
553 }
555 //------------------------------FillLocArray-----------------------------------
556 // Create a bit of debug info and append it to the array. The mapping is from
557 // Java local or expression stack to constant, register or stack-slot. For
558 // doubles, insert 2 mappings and return 1 (to tell the caller that the next
559 // entry has been taken care of and caller should skip it).
560 static LocationValue *new_loc_value( PhaseRegAlloc *ra, OptoReg::Name regnum, Location::Type l_type ) {
561 // This should never have accepted Bad before
562 assert(OptoReg::is_valid(regnum), "location must be valid");
563 return (OptoReg::is_reg(regnum))
564 ? new LocationValue(Location::new_reg_loc(l_type, OptoReg::as_VMReg(regnum)) )
565 : new LocationValue(Location::new_stk_loc(l_type, ra->reg2offset(regnum)));
566 }
569 ObjectValue*
570 Compile::sv_for_node_id(GrowableArray<ScopeValue*> *objs, int id) {
571 for (int i = 0; i < objs->length(); i++) {
572 assert(objs->at(i)->is_object(), "corrupt object cache");
573 ObjectValue* sv = (ObjectValue*) objs->at(i);
574 if (sv->id() == id) {
575 return sv;
576 }
577 }
578 // Otherwise..
579 return NULL;
580 }
582 void Compile::set_sv_for_object_node(GrowableArray<ScopeValue*> *objs,
583 ObjectValue* sv ) {
584 assert(sv_for_node_id(objs, sv->id()) == NULL, "Precondition");
585 objs->append(sv);
586 }
589 void Compile::FillLocArray( int idx, MachSafePointNode* sfpt, Node *local,
590 GrowableArray<ScopeValue*> *array,
591 GrowableArray<ScopeValue*> *objs ) {
592 assert( local, "use _top instead of null" );
593 if (array->length() != idx) {
594 assert(array->length() == idx + 1, "Unexpected array count");
595 // Old functionality:
596 // return
597 // New functionality:
598 // Assert if the local is not top. In product mode let the new node
599 // override the old entry.
600 assert(local == top(), "LocArray collision");
601 if (local == top()) {
602 return;
603 }
604 array->pop();
605 }
606 const Type *t = local->bottom_type();
608 // Is it a safepoint scalar object node?
609 if (local->is_SafePointScalarObject()) {
610 SafePointScalarObjectNode* spobj = local->as_SafePointScalarObject();
612 ObjectValue* sv = Compile::sv_for_node_id(objs, spobj->_idx);
613 if (sv == NULL) {
614 ciKlass* cik = t->is_oopptr()->klass();
615 assert(cik->is_instance_klass() ||
616 cik->is_array_klass(), "Not supported allocation.");
617 sv = new ObjectValue(spobj->_idx,
618 new ConstantOopWriteValue(cik->constant_encoding()));
619 Compile::set_sv_for_object_node(objs, sv);
621 uint first_ind = spobj->first_index();
622 for (uint i = 0; i < spobj->n_fields(); i++) {
623 Node* fld_node = sfpt->in(first_ind+i);
624 (void)FillLocArray(sv->field_values()->length(), sfpt, fld_node, sv->field_values(), objs);
625 }
626 }
627 array->append(sv);
628 return;
629 }
631 // Grab the register number for the local
632 OptoReg::Name regnum = _regalloc->get_reg_first(local);
633 if( OptoReg::is_valid(regnum) ) {// Got a register/stack?
634 // Record the double as two float registers.
635 // The register mask for such a value always specifies two adjacent
636 // float registers, with the lower register number even.
637 // Normally, the allocation of high and low words to these registers
638 // is irrelevant, because nearly all operations on register pairs
639 // (e.g., StoreD) treat them as a single unit.
640 // Here, we assume in addition that the words in these two registers
641 // stored "naturally" (by operations like StoreD and double stores
642 // within the interpreter) such that the lower-numbered register
643 // is written to the lower memory address. This may seem like
644 // a machine dependency, but it is not--it is a requirement on
645 // the author of the <arch>.ad file to ensure that, for every
646 // even/odd double-register pair to which a double may be allocated,
647 // the word in the even single-register is stored to the first
648 // memory word. (Note that register numbers are completely
649 // arbitrary, and are not tied to any machine-level encodings.)
650 #ifdef _LP64
651 if( t->base() == Type::DoubleBot || t->base() == Type::DoubleCon ) {
652 array->append(new ConstantIntValue(0));
653 array->append(new_loc_value( _regalloc, regnum, Location::dbl ));
654 } else if ( t->base() == Type::Long ) {
655 array->append(new ConstantIntValue(0));
656 array->append(new_loc_value( _regalloc, regnum, Location::lng ));
657 } else if ( t->base() == Type::RawPtr ) {
658 // jsr/ret return address which must be restored into a the full
659 // width 64-bit stack slot.
660 array->append(new_loc_value( _regalloc, regnum, Location::lng ));
661 }
662 #else //_LP64
663 #ifdef SPARC
664 if (t->base() == Type::Long && OptoReg::is_reg(regnum)) {
665 // For SPARC we have to swap high and low words for
666 // long values stored in a single-register (g0-g7).
667 array->append(new_loc_value( _regalloc, regnum , Location::normal ));
668 array->append(new_loc_value( _regalloc, OptoReg::add(regnum,1), Location::normal ));
669 } else
670 #endif //SPARC
671 if( t->base() == Type::DoubleBot || t->base() == Type::DoubleCon || t->base() == Type::Long ) {
672 // Repack the double/long as two jints.
673 // The convention the interpreter uses is that the second local
674 // holds the first raw word of the native double representation.
675 // This is actually reasonable, since locals and stack arrays
676 // grow downwards in all implementations.
677 // (If, on some machine, the interpreter's Java locals or stack
678 // were to grow upwards, the embedded doubles would be word-swapped.)
679 array->append(new_loc_value( _regalloc, OptoReg::add(regnum,1), Location::normal ));
680 array->append(new_loc_value( _regalloc, regnum , Location::normal ));
681 }
682 #endif //_LP64
683 else if( (t->base() == Type::FloatBot || t->base() == Type::FloatCon) &&
684 OptoReg::is_reg(regnum) ) {
685 array->append(new_loc_value( _regalloc, regnum, Matcher::float_in_double()
686 ? Location::float_in_dbl : Location::normal ));
687 } else if( t->base() == Type::Int && OptoReg::is_reg(regnum) ) {
688 array->append(new_loc_value( _regalloc, regnum, Matcher::int_in_long
689 ? Location::int_in_long : Location::normal ));
690 } else if( t->base() == Type::NarrowOop ) {
691 array->append(new_loc_value( _regalloc, regnum, Location::narrowoop ));
692 } else {
693 array->append(new_loc_value( _regalloc, regnum, _regalloc->is_oop(local) ? Location::oop : Location::normal ));
694 }
695 return;
696 }
698 // No register. It must be constant data.
699 switch (t->base()) {
700 case Type::Half: // Second half of a double
701 ShouldNotReachHere(); // Caller should skip 2nd halves
702 break;
703 case Type::AnyPtr:
704 array->append(new ConstantOopWriteValue(NULL));
705 break;
706 case Type::AryPtr:
707 case Type::InstPtr:
708 case Type::KlassPtr: // fall through
709 array->append(new ConstantOopWriteValue(t->isa_oopptr()->const_oop()->constant_encoding()));
710 break;
711 case Type::NarrowOop:
712 if (t == TypeNarrowOop::NULL_PTR) {
713 array->append(new ConstantOopWriteValue(NULL));
714 } else {
715 array->append(new ConstantOopWriteValue(t->make_ptr()->isa_oopptr()->const_oop()->constant_encoding()));
716 }
717 break;
718 case Type::Int:
719 array->append(new ConstantIntValue(t->is_int()->get_con()));
720 break;
721 case Type::RawPtr:
722 // A return address (T_ADDRESS).
723 assert((intptr_t)t->is_ptr()->get_con() < (intptr_t)0x10000, "must be a valid BCI");
724 #ifdef _LP64
725 // Must be restored to the full-width 64-bit stack slot.
726 array->append(new ConstantLongValue(t->is_ptr()->get_con()));
727 #else
728 array->append(new ConstantIntValue(t->is_ptr()->get_con()));
729 #endif
730 break;
731 case Type::FloatCon: {
732 float f = t->is_float_constant()->getf();
733 array->append(new ConstantIntValue(jint_cast(f)));
734 break;
735 }
736 case Type::DoubleCon: {
737 jdouble d = t->is_double_constant()->getd();
738 #ifdef _LP64
739 array->append(new ConstantIntValue(0));
740 array->append(new ConstantDoubleValue(d));
741 #else
742 // Repack the double as two jints.
743 // The convention the interpreter uses is that the second local
744 // holds the first raw word of the native double representation.
745 // This is actually reasonable, since locals and stack arrays
746 // grow downwards in all implementations.
747 // (If, on some machine, the interpreter's Java locals or stack
748 // were to grow upwards, the embedded doubles would be word-swapped.)
749 jint *dp = (jint*)&d;
750 array->append(new ConstantIntValue(dp[1]));
751 array->append(new ConstantIntValue(dp[0]));
752 #endif
753 break;
754 }
755 case Type::Long: {
756 jlong d = t->is_long()->get_con();
757 #ifdef _LP64
758 array->append(new ConstantIntValue(0));
759 array->append(new ConstantLongValue(d));
760 #else
761 // Repack the long as two jints.
762 // The convention the interpreter uses is that the second local
763 // holds the first raw word of the native double representation.
764 // This is actually reasonable, since locals and stack arrays
765 // grow downwards in all implementations.
766 // (If, on some machine, the interpreter's Java locals or stack
767 // were to grow upwards, the embedded doubles would be word-swapped.)
768 jint *dp = (jint*)&d;
769 array->append(new ConstantIntValue(dp[1]));
770 array->append(new ConstantIntValue(dp[0]));
771 #endif
772 break;
773 }
774 case Type::Top: // Add an illegal value here
775 array->append(new LocationValue(Location()));
776 break;
777 default:
778 ShouldNotReachHere();
779 break;
780 }
781 }
783 // Determine if this node starts a bundle
784 bool Compile::starts_bundle(const Node *n) const {
785 return (_node_bundling_limit > n->_idx &&
786 _node_bundling_base[n->_idx].starts_bundle());
787 }
789 //--------------------------Process_OopMap_Node--------------------------------
790 void Compile::Process_OopMap_Node(MachNode *mach, int current_offset) {
792 // Handle special safepoint nodes for synchronization
793 MachSafePointNode *sfn = mach->as_MachSafePoint();
794 MachCallNode *mcall;
796 #ifdef ENABLE_ZAP_DEAD_LOCALS
797 assert( is_node_getting_a_safepoint(mach), "logic does not match; false negative");
798 #endif
800 int safepoint_pc_offset = current_offset;
801 bool is_method_handle_invoke = false;
802 bool return_oop = false;
804 // Add the safepoint in the DebugInfoRecorder
805 if( !mach->is_MachCall() ) {
806 mcall = NULL;
807 debug_info()->add_safepoint(safepoint_pc_offset, sfn->_oop_map);
808 } else {
809 mcall = mach->as_MachCall();
811 // Is the call a MethodHandle call?
812 if (mcall->is_MachCallJava()) {
813 if (mcall->as_MachCallJava()->_method_handle_invoke) {
814 assert(has_method_handle_invokes(), "must have been set during call generation");
815 is_method_handle_invoke = true;
816 }
817 }
819 // Check if a call returns an object.
820 if (mcall->return_value_is_used() &&
821 mcall->tf()->range()->field_at(TypeFunc::Parms)->isa_ptr()) {
822 return_oop = true;
823 }
824 safepoint_pc_offset += mcall->ret_addr_offset();
825 debug_info()->add_safepoint(safepoint_pc_offset, mcall->_oop_map);
826 }
828 // Loop over the JVMState list to add scope information
829 // Do not skip safepoints with a NULL method, they need monitor info
830 JVMState* youngest_jvms = sfn->jvms();
831 int max_depth = youngest_jvms->depth();
833 // Allocate the object pool for scalar-replaced objects -- the map from
834 // small-integer keys (which can be recorded in the local and ostack
835 // arrays) to descriptions of the object state.
836 GrowableArray<ScopeValue*> *objs = new GrowableArray<ScopeValue*>();
838 // Visit scopes from oldest to youngest.
839 for (int depth = 1; depth <= max_depth; depth++) {
840 JVMState* jvms = youngest_jvms->of_depth(depth);
841 int idx;
842 ciMethod* method = jvms->has_method() ? jvms->method() : NULL;
843 // Safepoints that do not have method() set only provide oop-map and monitor info
844 // to support GC; these do not support deoptimization.
845 int num_locs = (method == NULL) ? 0 : jvms->loc_size();
846 int num_exps = (method == NULL) ? 0 : jvms->stk_size();
847 int num_mon = jvms->nof_monitors();
848 assert(method == NULL || jvms->bci() < 0 || num_locs == method->max_locals(),
849 "JVMS local count must match that of the method");
851 // Add Local and Expression Stack Information
853 // Insert locals into the locarray
854 GrowableArray<ScopeValue*> *locarray = new GrowableArray<ScopeValue*>(num_locs);
855 for( idx = 0; idx < num_locs; idx++ ) {
856 FillLocArray( idx, sfn, sfn->local(jvms, idx), locarray, objs );
857 }
859 // Insert expression stack entries into the exparray
860 GrowableArray<ScopeValue*> *exparray = new GrowableArray<ScopeValue*>(num_exps);
861 for( idx = 0; idx < num_exps; idx++ ) {
862 FillLocArray( idx, sfn, sfn->stack(jvms, idx), exparray, objs );
863 }
865 // Add in mappings of the monitors
866 assert( !method ||
867 !method->is_synchronized() ||
868 method->is_native() ||
869 num_mon > 0 ||
870 !GenerateSynchronizationCode,
871 "monitors must always exist for synchronized methods");
873 // Build the growable array of ScopeValues for exp stack
874 GrowableArray<MonitorValue*> *monarray = new GrowableArray<MonitorValue*>(num_mon);
876 // Loop over monitors and insert into array
877 for(idx = 0; idx < num_mon; idx++) {
878 // Grab the node that defines this monitor
879 Node* box_node = sfn->monitor_box(jvms, idx);
880 Node* obj_node = sfn->monitor_obj(jvms, idx);
882 // Create ScopeValue for object
883 ScopeValue *scval = NULL;
885 if( obj_node->is_SafePointScalarObject() ) {
886 SafePointScalarObjectNode* spobj = obj_node->as_SafePointScalarObject();
887 scval = Compile::sv_for_node_id(objs, spobj->_idx);
888 if (scval == NULL) {
889 const Type *t = obj_node->bottom_type();
890 ciKlass* cik = t->is_oopptr()->klass();
891 assert(cik->is_instance_klass() ||
892 cik->is_array_klass(), "Not supported allocation.");
893 ObjectValue* sv = new ObjectValue(spobj->_idx,
894 new ConstantOopWriteValue(cik->constant_encoding()));
895 Compile::set_sv_for_object_node(objs, sv);
897 uint first_ind = spobj->first_index();
898 for (uint i = 0; i < spobj->n_fields(); i++) {
899 Node* fld_node = sfn->in(first_ind+i);
900 (void)FillLocArray(sv->field_values()->length(), sfn, fld_node, sv->field_values(), objs);
901 }
902 scval = sv;
903 }
904 } else if( !obj_node->is_Con() ) {
905 OptoReg::Name obj_reg = _regalloc->get_reg_first(obj_node);
906 if( obj_node->bottom_type()->base() == Type::NarrowOop ) {
907 scval = new_loc_value( _regalloc, obj_reg, Location::narrowoop );
908 } else {
909 scval = new_loc_value( _regalloc, obj_reg, Location::oop );
910 }
911 } else {
912 const TypePtr *tp = obj_node->bottom_type()->make_ptr();
913 scval = new ConstantOopWriteValue(tp->is_instptr()->const_oop()->constant_encoding());
914 }
916 OptoReg::Name box_reg = BoxLockNode::stack_slot(box_node);
917 Location basic_lock = Location::new_stk_loc(Location::normal,_regalloc->reg2offset(box_reg));
918 while( !box_node->is_BoxLock() ) box_node = box_node->in(1);
919 monarray->append(new MonitorValue(scval, basic_lock, box_node->as_BoxLock()->is_eliminated()));
920 }
922 // We dump the object pool first, since deoptimization reads it in first.
923 debug_info()->dump_object_pool(objs);
925 // Build first class objects to pass to scope
926 DebugToken *locvals = debug_info()->create_scope_values(locarray);
927 DebugToken *expvals = debug_info()->create_scope_values(exparray);
928 DebugToken *monvals = debug_info()->create_monitor_values(monarray);
930 // Make method available for all Safepoints
931 ciMethod* scope_method = method ? method : _method;
932 // Describe the scope here
933 assert(jvms->bci() >= InvocationEntryBci && jvms->bci() <= 0x10000, "must be a valid or entry BCI");
934 assert(!jvms->should_reexecute() || depth == max_depth, "reexecute allowed only for the youngest");
935 // Now we can describe the scope.
936 debug_info()->describe_scope(safepoint_pc_offset, scope_method, jvms->bci(), jvms->should_reexecute(), is_method_handle_invoke, return_oop, locvals, expvals, monvals);
937 } // End jvms loop
939 // Mark the end of the scope set.
940 debug_info()->end_safepoint(safepoint_pc_offset);
941 }
945 // A simplified version of Process_OopMap_Node, to handle non-safepoints.
946 class NonSafepointEmitter {
947 Compile* C;
948 JVMState* _pending_jvms;
949 int _pending_offset;
951 void emit_non_safepoint();
953 public:
954 NonSafepointEmitter(Compile* compile) {
955 this->C = compile;
956 _pending_jvms = NULL;
957 _pending_offset = 0;
958 }
960 void observe_instruction(Node* n, int pc_offset) {
961 if (!C->debug_info()->recording_non_safepoints()) return;
963 Node_Notes* nn = C->node_notes_at(n->_idx);
964 if (nn == NULL || nn->jvms() == NULL) return;
965 if (_pending_jvms != NULL &&
966 _pending_jvms->same_calls_as(nn->jvms())) {
967 // Repeated JVMS? Stretch it up here.
968 _pending_offset = pc_offset;
969 } else {
970 if (_pending_jvms != NULL &&
971 _pending_offset < pc_offset) {
972 emit_non_safepoint();
973 }
974 _pending_jvms = NULL;
975 if (pc_offset > C->debug_info()->last_pc_offset()) {
976 // This is the only way _pending_jvms can become non-NULL:
977 _pending_jvms = nn->jvms();
978 _pending_offset = pc_offset;
979 }
980 }
981 }
983 // Stay out of the way of real safepoints:
984 void observe_safepoint(JVMState* jvms, int pc_offset) {
985 if (_pending_jvms != NULL &&
986 !_pending_jvms->same_calls_as(jvms) &&
987 _pending_offset < pc_offset) {
988 emit_non_safepoint();
989 }
990 _pending_jvms = NULL;
991 }
993 void flush_at_end() {
994 if (_pending_jvms != NULL) {
995 emit_non_safepoint();
996 }
997 _pending_jvms = NULL;
998 }
999 };
1001 void NonSafepointEmitter::emit_non_safepoint() {
1002 JVMState* youngest_jvms = _pending_jvms;
1003 int pc_offset = _pending_offset;
1005 // Clear it now:
1006 _pending_jvms = NULL;
1008 DebugInformationRecorder* debug_info = C->debug_info();
1009 assert(debug_info->recording_non_safepoints(), "sanity");
1011 debug_info->add_non_safepoint(pc_offset);
1012 int max_depth = youngest_jvms->depth();
1014 // Visit scopes from oldest to youngest.
1015 for (int depth = 1; depth <= max_depth; depth++) {
1016 JVMState* jvms = youngest_jvms->of_depth(depth);
1017 ciMethod* method = jvms->has_method() ? jvms->method() : NULL;
1018 assert(!jvms->should_reexecute() || depth==max_depth, "reexecute allowed only for the youngest");
1019 debug_info->describe_scope(pc_offset, method, jvms->bci(), jvms->should_reexecute());
1020 }
1022 // Mark the end of the scope set.
1023 debug_info->end_non_safepoint(pc_offset);
1024 }
1028 // helper for Fill_buffer bailout logic
1029 static void turn_off_compiler(Compile* C) {
1030 if (CodeCache::unallocated_capacity() >= CodeCacheMinimumFreeSpace*10) {
1031 // Do not turn off compilation if a single giant method has
1032 // blown the code cache size.
1033 C->record_failure("excessive request to CodeCache");
1034 } else {
1035 // Let CompilerBroker disable further compilations.
1036 C->record_failure("CodeCache is full");
1037 }
1038 }
1041 //------------------------------Fill_buffer------------------------------------
1042 void Compile::Fill_buffer() {
1044 // Set the initially allocated size
1045 int code_req = initial_code_capacity;
1046 int locs_req = initial_locs_capacity;
1047 int stub_req = TraceJumps ? initial_stub_capacity * 10 : initial_stub_capacity;
1048 int const_req = initial_const_capacity;
1049 bool labels_not_set = true;
1051 int pad_req = NativeCall::instruction_size;
1052 // The extra spacing after the code is necessary on some platforms.
1053 // Sometimes we need to patch in a jump after the last instruction,
1054 // if the nmethod has been deoptimized. (See 4932387, 4894843.)
1056 uint i;
1057 // Compute the byte offset where we can store the deopt pc.
1058 if (fixed_slots() != 0) {
1059 _orig_pc_slot_offset_in_bytes = _regalloc->reg2offset(OptoReg::stack2reg(_orig_pc_slot));
1060 }
1062 // Compute prolog code size
1063 _method_size = 0;
1064 _frame_slots = OptoReg::reg2stack(_matcher->_old_SP)+_regalloc->_framesize;
1065 #ifdef IA64
1066 if (save_argument_registers()) {
1067 // 4815101: this is a stub with implicit and unknown precision fp args.
1068 // The usual spill mechanism can only generate stfd's in this case, which
1069 // doesn't work if the fp reg to spill contains a single-precision denorm.
1070 // Instead, we hack around the normal spill mechanism using stfspill's and
1071 // ldffill's in the MachProlog and MachEpilog emit methods. We allocate
1072 // space here for the fp arg regs (f8-f15) we're going to thusly spill.
1073 //
1074 // If we ever implement 16-byte 'registers' == stack slots, we can
1075 // get rid of this hack and have SpillCopy generate stfspill/ldffill
1076 // instead of stfd/stfs/ldfd/ldfs.
1077 _frame_slots += 8*(16/BytesPerInt);
1078 }
1079 #endif
1080 assert( _frame_slots >= 0 && _frame_slots < 1000000, "sanity check" );
1082 // Create an array of unused labels, one for each basic block
1083 Label *blk_labels = NEW_RESOURCE_ARRAY(Label, _cfg->_num_blocks+1);
1085 for( i=0; i <= _cfg->_num_blocks; i++ ) {
1086 blk_labels[i].init();
1087 }
1089 // If this machine supports different size branch offsets, then pre-compute
1090 // the length of the blocks
1091 if( _matcher->is_short_branch_offset(-1, 0) ) {
1092 Shorten_branches(blk_labels, code_req, locs_req, stub_req, const_req);
1093 labels_not_set = false;
1094 }
1096 // nmethod and CodeBuffer count stubs & constants as part of method's code.
1097 int exception_handler_req = size_exception_handler();
1098 int deopt_handler_req = size_deopt_handler();
1099 exception_handler_req += MAX_stubs_size; // add marginal slop for handler
1100 deopt_handler_req += MAX_stubs_size; // add marginal slop for handler
1101 stub_req += MAX_stubs_size; // ensure per-stub margin
1102 code_req += MAX_inst_size; // ensure per-instruction margin
1104 if (StressCodeBuffers)
1105 code_req = const_req = stub_req = exception_handler_req = deopt_handler_req = 0x10; // force expansion
1107 int total_req =
1108 code_req +
1109 pad_req +
1110 stub_req +
1111 exception_handler_req +
1112 deopt_handler_req + // deopt handler
1113 const_req;
1115 if (has_method_handle_invokes())
1116 total_req += deopt_handler_req; // deopt MH handler
1118 CodeBuffer* cb = code_buffer();
1119 cb->initialize(total_req, locs_req);
1121 // Have we run out of code space?
1122 if ((cb->blob() == NULL) || (!CompileBroker::should_compile_new_jobs())) {
1123 turn_off_compiler(this);
1124 return;
1125 }
1126 // Configure the code buffer.
1127 cb->initialize_consts_size(const_req);
1128 cb->initialize_stubs_size(stub_req);
1129 cb->initialize_oop_recorder(env()->oop_recorder());
1131 // fill in the nop array for bundling computations
1132 MachNode *_nop_list[Bundle::_nop_count];
1133 Bundle::initialize_nops(_nop_list, this);
1135 // Create oopmap set.
1136 _oop_map_set = new OopMapSet();
1138 // !!!!! This preserves old handling of oopmaps for now
1139 debug_info()->set_oopmaps(_oop_map_set);
1141 // Count and start of implicit null check instructions
1142 uint inct_cnt = 0;
1143 uint *inct_starts = NEW_RESOURCE_ARRAY(uint, _cfg->_num_blocks+1);
1145 // Count and start of calls
1146 uint *call_returns = NEW_RESOURCE_ARRAY(uint, _cfg->_num_blocks+1);
1148 uint return_offset = 0;
1149 int nop_size = (new (this) MachNopNode())->size(_regalloc);
1151 int previous_offset = 0;
1152 int current_offset = 0;
1153 int last_call_offset = -1;
1155 // Create an array of unused labels, one for each basic block, if printing is enabled
1156 #ifndef PRODUCT
1157 int *node_offsets = NULL;
1158 uint node_offset_limit = unique();
1161 if ( print_assembly() )
1162 node_offsets = NEW_RESOURCE_ARRAY(int, node_offset_limit);
1163 #endif
1165 NonSafepointEmitter non_safepoints(this); // emit non-safepoints lazily
1167 // ------------------
1168 // Now fill in the code buffer
1169 Node *delay_slot = NULL;
1171 for( i=0; i < _cfg->_num_blocks; i++ ) {
1172 Block *b = _cfg->_blocks[i];
1174 Node *head = b->head();
1176 // If this block needs to start aligned (i.e, can be reached other
1177 // than by falling-thru from the previous block), then force the
1178 // start of a new bundle.
1179 if( Pipeline::requires_bundling() && starts_bundle(head) )
1180 cb->flush_bundle(true);
1182 // Define the label at the beginning of the basic block
1183 if( labels_not_set )
1184 MacroAssembler(cb).bind( blk_labels[b->_pre_order] );
1186 else
1187 assert( blk_labels[b->_pre_order].loc_pos() == cb->insts_size(),
1188 "label position does not match code offset" );
1190 uint last_inst = b->_nodes.size();
1192 // Emit block normally, except for last instruction.
1193 // Emit means "dump code bits into code buffer".
1194 for( uint j = 0; j<last_inst; j++ ) {
1196 // Get the node
1197 Node* n = b->_nodes[j];
1199 // See if delay slots are supported
1200 if (valid_bundle_info(n) &&
1201 node_bundling(n)->used_in_unconditional_delay()) {
1202 assert(delay_slot == NULL, "no use of delay slot node");
1203 assert(n->size(_regalloc) == Pipeline::instr_unit_size(), "delay slot instruction wrong size");
1205 delay_slot = n;
1206 continue;
1207 }
1209 // If this starts a new instruction group, then flush the current one
1210 // (but allow split bundles)
1211 if( Pipeline::requires_bundling() && starts_bundle(n) )
1212 cb->flush_bundle(false);
1214 // The following logic is duplicated in the code ifdeffed for
1215 // ENABLE_ZAP_DEAD_LOCALS which appears above in this file. It
1216 // should be factored out. Or maybe dispersed to the nodes?
1218 // Special handling for SafePoint/Call Nodes
1219 bool is_mcall = false;
1220 if( n->is_Mach() ) {
1221 MachNode *mach = n->as_Mach();
1222 is_mcall = n->is_MachCall();
1223 bool is_sfn = n->is_MachSafePoint();
1225 // If this requires all previous instructions be flushed, then do so
1226 if( is_sfn || is_mcall || mach->alignment_required() != 1) {
1227 cb->flush_bundle(true);
1228 current_offset = cb->insts_size();
1229 }
1231 // align the instruction if necessary
1232 int padding = mach->compute_padding(current_offset);
1233 // Make sure safepoint node for polling is distinct from a call's
1234 // return by adding a nop if needed.
1235 if (is_sfn && !is_mcall && padding == 0 && current_offset == last_call_offset ) {
1236 padding = nop_size;
1237 }
1238 assert( labels_not_set || padding == 0, "instruction should already be aligned");
1240 if(padding > 0) {
1241 assert((padding % nop_size) == 0, "padding is not a multiple of NOP size");
1242 int nops_cnt = padding / nop_size;
1243 MachNode *nop = new (this) MachNopNode(nops_cnt);
1244 b->_nodes.insert(j++, nop);
1245 last_inst++;
1246 _cfg->_bbs.map( nop->_idx, b );
1247 nop->emit(*cb, _regalloc);
1248 cb->flush_bundle(true);
1249 current_offset = cb->insts_size();
1250 }
1252 // Remember the start of the last call in a basic block
1253 if (is_mcall) {
1254 MachCallNode *mcall = mach->as_MachCall();
1256 // This destination address is NOT PC-relative
1257 mcall->method_set((intptr_t)mcall->entry_point());
1259 // Save the return address
1260 call_returns[b->_pre_order] = current_offset + mcall->ret_addr_offset();
1262 if (!mcall->is_safepoint_node()) {
1263 is_mcall = false;
1264 is_sfn = false;
1265 }
1266 }
1268 // sfn will be valid whenever mcall is valid now because of inheritance
1269 if( is_sfn || is_mcall ) {
1271 // Handle special safepoint nodes for synchronization
1272 if( !is_mcall ) {
1273 MachSafePointNode *sfn = mach->as_MachSafePoint();
1274 // !!!!! Stubs only need an oopmap right now, so bail out
1275 if( sfn->jvms()->method() == NULL) {
1276 // Write the oopmap directly to the code blob??!!
1277 # ifdef ENABLE_ZAP_DEAD_LOCALS
1278 assert( !is_node_getting_a_safepoint(sfn), "logic does not match; false positive");
1279 # endif
1280 continue;
1281 }
1282 } // End synchronization
1284 non_safepoints.observe_safepoint(mach->as_MachSafePoint()->jvms(),
1285 current_offset);
1286 Process_OopMap_Node(mach, current_offset);
1287 } // End if safepoint
1289 // If this is a null check, then add the start of the previous instruction to the list
1290 else if( mach->is_MachNullCheck() ) {
1291 inct_starts[inct_cnt++] = previous_offset;
1292 }
1294 // If this is a branch, then fill in the label with the target BB's label
1295 else if ( mach->is_Branch() ) {
1297 if ( mach->ideal_Opcode() == Op_Jump ) {
1298 for (uint h = 0; h < b->_num_succs; h++ ) {
1299 Block* succs_block = b->_succs[h];
1300 for (uint j = 1; j < succs_block->num_preds(); j++) {
1301 Node* jpn = succs_block->pred(j);
1302 if ( jpn->is_JumpProj() && jpn->in(0) == mach ) {
1303 uint block_num = succs_block->non_connector()->_pre_order;
1304 Label *blkLabel = &blk_labels[block_num];
1305 mach->add_case_label(jpn->as_JumpProj()->proj_no(), blkLabel);
1306 }
1307 }
1308 }
1309 } else {
1310 // For Branchs
1311 // This requires the TRUE branch target be in succs[0]
1312 uint block_num = b->non_connector_successor(0)->_pre_order;
1313 mach->label_set( blk_labels[block_num], block_num );
1314 }
1315 }
1317 #ifdef ASSERT
1318 // Check that oop-store precedes the card-mark
1319 else if( mach->ideal_Opcode() == Op_StoreCM ) {
1320 uint storeCM_idx = j;
1321 Node *oop_store = mach->in(mach->_cnt); // First precedence edge
1322 assert( oop_store != NULL, "storeCM expects a precedence edge");
1323 uint i4;
1324 for( i4 = 0; i4 < last_inst; ++i4 ) {
1325 if( b->_nodes[i4] == oop_store ) break;
1326 }
1327 // Note: This test can provide a false failure if other precedence
1328 // edges have been added to the storeCMNode.
1329 assert( i4 == last_inst || i4 < storeCM_idx, "CM card-mark executes before oop-store");
1330 }
1331 #endif
1333 else if( !n->is_Proj() ) {
1334 // Remember the beginning of the previous instruction, in case
1335 // it's followed by a flag-kill and a null-check. Happens on
1336 // Intel all the time, with add-to-memory kind of opcodes.
1337 previous_offset = current_offset;
1338 }
1339 }
1341 // Verify that there is sufficient space remaining
1342 cb->insts()->maybe_expand_to_ensure_remaining(MAX_inst_size);
1343 if ((cb->blob() == NULL) || (!CompileBroker::should_compile_new_jobs())) {
1344 turn_off_compiler(this);
1345 return;
1346 }
1348 // Save the offset for the listing
1349 #ifndef PRODUCT
1350 if( node_offsets && n->_idx < node_offset_limit )
1351 node_offsets[n->_idx] = cb->insts_size();
1352 #endif
1354 // "Normal" instruction case
1355 n->emit(*cb, _regalloc);
1356 current_offset = cb->insts_size();
1357 non_safepoints.observe_instruction(n, current_offset);
1359 // mcall is last "call" that can be a safepoint
1360 // record it so we can see if a poll will directly follow it
1361 // in which case we'll need a pad to make the PcDesc sites unique
1362 // see 5010568. This can be slightly inaccurate but conservative
1363 // in the case that return address is not actually at current_offset.
1364 // This is a small price to pay.
1366 if (is_mcall) {
1367 last_call_offset = current_offset;
1368 }
1370 // See if this instruction has a delay slot
1371 if ( valid_bundle_info(n) && node_bundling(n)->use_unconditional_delay()) {
1372 assert(delay_slot != NULL, "expecting delay slot node");
1374 // Back up 1 instruction
1375 cb->set_insts_end(cb->insts_end() - Pipeline::instr_unit_size());
1377 // Save the offset for the listing
1378 #ifndef PRODUCT
1379 if( node_offsets && delay_slot->_idx < node_offset_limit )
1380 node_offsets[delay_slot->_idx] = cb->insts_size();
1381 #endif
1383 // Support a SafePoint in the delay slot
1384 if( delay_slot->is_MachSafePoint() ) {
1385 MachNode *mach = delay_slot->as_Mach();
1386 // !!!!! Stubs only need an oopmap right now, so bail out
1387 if( !mach->is_MachCall() && mach->as_MachSafePoint()->jvms()->method() == NULL ) {
1388 // Write the oopmap directly to the code blob??!!
1389 # ifdef ENABLE_ZAP_DEAD_LOCALS
1390 assert( !is_node_getting_a_safepoint(mach), "logic does not match; false positive");
1391 # endif
1392 delay_slot = NULL;
1393 continue;
1394 }
1396 int adjusted_offset = current_offset - Pipeline::instr_unit_size();
1397 non_safepoints.observe_safepoint(mach->as_MachSafePoint()->jvms(),
1398 adjusted_offset);
1399 // Generate an OopMap entry
1400 Process_OopMap_Node(mach, adjusted_offset);
1401 }
1403 // Insert the delay slot instruction
1404 delay_slot->emit(*cb, _regalloc);
1406 // Don't reuse it
1407 delay_slot = NULL;
1408 }
1410 } // End for all instructions in block
1412 // If the next block is the top of a loop, pad this block out to align
1413 // the loop top a little. Helps prevent pipe stalls at loop back branches.
1414 if( i<_cfg->_num_blocks-1 ) {
1415 Block *nb = _cfg->_blocks[i+1];
1416 uint padding = nb->alignment_padding(current_offset);
1417 if( padding > 0 ) {
1418 MachNode *nop = new (this) MachNopNode(padding / nop_size);
1419 b->_nodes.insert( b->_nodes.size(), nop );
1420 _cfg->_bbs.map( nop->_idx, b );
1421 nop->emit(*cb, _regalloc);
1422 current_offset = cb->insts_size();
1423 }
1424 }
1426 } // End of for all blocks
1428 non_safepoints.flush_at_end();
1430 // Offset too large?
1431 if (failing()) return;
1433 // Define a pseudo-label at the end of the code
1434 MacroAssembler(cb).bind( blk_labels[_cfg->_num_blocks] );
1436 // Compute the size of the first block
1437 _first_block_size = blk_labels[1].loc_pos() - blk_labels[0].loc_pos();
1439 assert(cb->insts_size() < 500000, "method is unreasonably large");
1441 // ------------------
1443 #ifndef PRODUCT
1444 // Information on the size of the method, without the extraneous code
1445 Scheduling::increment_method_size(cb->insts_size());
1446 #endif
1448 // ------------------
1449 // Fill in exception table entries.
1450 FillExceptionTables(inct_cnt, call_returns, inct_starts, blk_labels);
1452 // Only java methods have exception handlers and deopt handlers
1453 if (_method) {
1454 // Emit the exception handler code.
1455 _code_offsets.set_value(CodeOffsets::Exceptions, emit_exception_handler(*cb));
1456 // Emit the deopt handler code.
1457 _code_offsets.set_value(CodeOffsets::Deopt, emit_deopt_handler(*cb));
1459 // Emit the MethodHandle deopt handler code (if required).
1460 if (has_method_handle_invokes()) {
1461 // We can use the same code as for the normal deopt handler, we
1462 // just need a different entry point address.
1463 _code_offsets.set_value(CodeOffsets::DeoptMH, emit_deopt_handler(*cb));
1464 }
1465 }
1467 // One last check for failed CodeBuffer::expand:
1468 if ((cb->blob() == NULL) || (!CompileBroker::should_compile_new_jobs())) {
1469 turn_off_compiler(this);
1470 return;
1471 }
1473 #ifndef PRODUCT
1474 // Dump the assembly code, including basic-block numbers
1475 if (print_assembly()) {
1476 ttyLocker ttyl; // keep the following output all in one block
1477 if (!VMThread::should_terminate()) { // test this under the tty lock
1478 // This output goes directly to the tty, not the compiler log.
1479 // To enable tools to match it up with the compilation activity,
1480 // be sure to tag this tty output with the compile ID.
1481 if (xtty != NULL) {
1482 xtty->head("opto_assembly compile_id='%d'%s", compile_id(),
1483 is_osr_compilation() ? " compile_kind='osr'" :
1484 "");
1485 }
1486 if (method() != NULL) {
1487 method()->print_oop();
1488 print_codes();
1489 }
1490 dump_asm(node_offsets, node_offset_limit);
1491 if (xtty != NULL) {
1492 xtty->tail("opto_assembly");
1493 }
1494 }
1495 }
1496 #endif
1498 }
1500 void Compile::FillExceptionTables(uint cnt, uint *call_returns, uint *inct_starts, Label *blk_labels) {
1501 _inc_table.set_size(cnt);
1503 uint inct_cnt = 0;
1504 for( uint i=0; i<_cfg->_num_blocks; i++ ) {
1505 Block *b = _cfg->_blocks[i];
1506 Node *n = NULL;
1507 int j;
1509 // Find the branch; ignore trailing NOPs.
1510 for( j = b->_nodes.size()-1; j>=0; j-- ) {
1511 n = b->_nodes[j];
1512 if( !n->is_Mach() || n->as_Mach()->ideal_Opcode() != Op_Con )
1513 break;
1514 }
1516 // If we didn't find anything, continue
1517 if( j < 0 ) continue;
1519 // Compute ExceptionHandlerTable subtable entry and add it
1520 // (skip empty blocks)
1521 if( n->is_Catch() ) {
1523 // Get the offset of the return from the call
1524 uint call_return = call_returns[b->_pre_order];
1525 #ifdef ASSERT
1526 assert( call_return > 0, "no call seen for this basic block" );
1527 while( b->_nodes[--j]->Opcode() == Op_MachProj ) ;
1528 assert( b->_nodes[j]->is_Call(), "CatchProj must follow call" );
1529 #endif
1530 // last instruction is a CatchNode, find it's CatchProjNodes
1531 int nof_succs = b->_num_succs;
1532 // allocate space
1533 GrowableArray<intptr_t> handler_bcis(nof_succs);
1534 GrowableArray<intptr_t> handler_pcos(nof_succs);
1535 // iterate through all successors
1536 for (int j = 0; j < nof_succs; j++) {
1537 Block* s = b->_succs[j];
1538 bool found_p = false;
1539 for( uint k = 1; k < s->num_preds(); k++ ) {
1540 Node *pk = s->pred(k);
1541 if( pk->is_CatchProj() && pk->in(0) == n ) {
1542 const CatchProjNode* p = pk->as_CatchProj();
1543 found_p = true;
1544 // add the corresponding handler bci & pco information
1545 if( p->_con != CatchProjNode::fall_through_index ) {
1546 // p leads to an exception handler (and is not fall through)
1547 assert(s == _cfg->_blocks[s->_pre_order],"bad numbering");
1548 // no duplicates, please
1549 if( !handler_bcis.contains(p->handler_bci()) ) {
1550 uint block_num = s->non_connector()->_pre_order;
1551 handler_bcis.append(p->handler_bci());
1552 handler_pcos.append(blk_labels[block_num].loc_pos());
1553 }
1554 }
1555 }
1556 }
1557 assert(found_p, "no matching predecessor found");
1558 // Note: Due to empty block removal, one block may have
1559 // several CatchProj inputs, from the same Catch.
1560 }
1562 // Set the offset of the return from the call
1563 _handler_table.add_subtable(call_return, &handler_bcis, NULL, &handler_pcos);
1564 continue;
1565 }
1567 // Handle implicit null exception table updates
1568 if( n->is_MachNullCheck() ) {
1569 uint block_num = b->non_connector_successor(0)->_pre_order;
1570 _inc_table.append( inct_starts[inct_cnt++], blk_labels[block_num].loc_pos() );
1571 continue;
1572 }
1573 } // End of for all blocks fill in exception table entries
1574 }
1576 // Static Variables
1577 #ifndef PRODUCT
1578 uint Scheduling::_total_nop_size = 0;
1579 uint Scheduling::_total_method_size = 0;
1580 uint Scheduling::_total_branches = 0;
1581 uint Scheduling::_total_unconditional_delays = 0;
1582 uint Scheduling::_total_instructions_per_bundle[Pipeline::_max_instrs_per_cycle+1];
1583 #endif
1585 // Initializer for class Scheduling
1587 Scheduling::Scheduling(Arena *arena, Compile &compile)
1588 : _arena(arena),
1589 _cfg(compile.cfg()),
1590 _bbs(compile.cfg()->_bbs),
1591 _regalloc(compile.regalloc()),
1592 _reg_node(arena),
1593 _bundle_instr_count(0),
1594 _bundle_cycle_number(0),
1595 _scheduled(arena),
1596 _available(arena),
1597 _next_node(NULL),
1598 _bundle_use(0, 0, resource_count, &_bundle_use_elements[0]),
1599 _pinch_free_list(arena)
1600 #ifndef PRODUCT
1601 , _branches(0)
1602 , _unconditional_delays(0)
1603 #endif
1604 {
1605 // Create a MachNopNode
1606 _nop = new (&compile) MachNopNode();
1608 // Now that the nops are in the array, save the count
1609 // (but allow entries for the nops)
1610 _node_bundling_limit = compile.unique();
1611 uint node_max = _regalloc->node_regs_max_index();
1613 compile.set_node_bundling_limit(_node_bundling_limit);
1615 // This one is persistent within the Compile class
1616 _node_bundling_base = NEW_ARENA_ARRAY(compile.comp_arena(), Bundle, node_max);
1618 // Allocate space for fixed-size arrays
1619 _node_latency = NEW_ARENA_ARRAY(arena, unsigned short, node_max);
1620 _uses = NEW_ARENA_ARRAY(arena, short, node_max);
1621 _current_latency = NEW_ARENA_ARRAY(arena, unsigned short, node_max);
1623 // Clear the arrays
1624 memset(_node_bundling_base, 0, node_max * sizeof(Bundle));
1625 memset(_node_latency, 0, node_max * sizeof(unsigned short));
1626 memset(_uses, 0, node_max * sizeof(short));
1627 memset(_current_latency, 0, node_max * sizeof(unsigned short));
1629 // Clear the bundling information
1630 memcpy(_bundle_use_elements,
1631 Pipeline_Use::elaborated_elements,
1632 sizeof(Pipeline_Use::elaborated_elements));
1634 // Get the last node
1635 Block *bb = _cfg->_blocks[_cfg->_blocks.size()-1];
1637 _next_node = bb->_nodes[bb->_nodes.size()-1];
1638 }
1640 #ifndef PRODUCT
1641 // Scheduling destructor
1642 Scheduling::~Scheduling() {
1643 _total_branches += _branches;
1644 _total_unconditional_delays += _unconditional_delays;
1645 }
1646 #endif
1648 // Step ahead "i" cycles
1649 void Scheduling::step(uint i) {
1651 Bundle *bundle = node_bundling(_next_node);
1652 bundle->set_starts_bundle();
1654 // Update the bundle record, but leave the flags information alone
1655 if (_bundle_instr_count > 0) {
1656 bundle->set_instr_count(_bundle_instr_count);
1657 bundle->set_resources_used(_bundle_use.resourcesUsed());
1658 }
1660 // Update the state information
1661 _bundle_instr_count = 0;
1662 _bundle_cycle_number += i;
1663 _bundle_use.step(i);
1664 }
1666 void Scheduling::step_and_clear() {
1667 Bundle *bundle = node_bundling(_next_node);
1668 bundle->set_starts_bundle();
1670 // Update the bundle record
1671 if (_bundle_instr_count > 0) {
1672 bundle->set_instr_count(_bundle_instr_count);
1673 bundle->set_resources_used(_bundle_use.resourcesUsed());
1675 _bundle_cycle_number += 1;
1676 }
1678 // Clear the bundling information
1679 _bundle_instr_count = 0;
1680 _bundle_use.reset();
1682 memcpy(_bundle_use_elements,
1683 Pipeline_Use::elaborated_elements,
1684 sizeof(Pipeline_Use::elaborated_elements));
1685 }
1687 //------------------------------ScheduleAndBundle------------------------------
1688 // Perform instruction scheduling and bundling over the sequence of
1689 // instructions in backwards order.
1690 void Compile::ScheduleAndBundle() {
1692 // Don't optimize this if it isn't a method
1693 if (!_method)
1694 return;
1696 // Don't optimize this if scheduling is disabled
1697 if (!do_scheduling())
1698 return;
1700 NOT_PRODUCT( TracePhase t2("isched", &_t_instrSched, TimeCompiler); )
1702 // Create a data structure for all the scheduling information
1703 Scheduling scheduling(Thread::current()->resource_area(), *this);
1705 // Walk backwards over each basic block, computing the needed alignment
1706 // Walk over all the basic blocks
1707 scheduling.DoScheduling();
1708 }
1710 //------------------------------ComputeLocalLatenciesForward-------------------
1711 // Compute the latency of all the instructions. This is fairly simple,
1712 // because we already have a legal ordering. Walk over the instructions
1713 // from first to last, and compute the latency of the instruction based
1714 // on the latency of the preceding instruction(s).
1715 void Scheduling::ComputeLocalLatenciesForward(const Block *bb) {
1716 #ifndef PRODUCT
1717 if (_cfg->C->trace_opto_output())
1718 tty->print("# -> ComputeLocalLatenciesForward\n");
1719 #endif
1721 // Walk over all the schedulable instructions
1722 for( uint j=_bb_start; j < _bb_end; j++ ) {
1724 // This is a kludge, forcing all latency calculations to start at 1.
1725 // Used to allow latency 0 to force an instruction to the beginning
1726 // of the bb
1727 uint latency = 1;
1728 Node *use = bb->_nodes[j];
1729 uint nlen = use->len();
1731 // Walk over all the inputs
1732 for ( uint k=0; k < nlen; k++ ) {
1733 Node *def = use->in(k);
1734 if (!def)
1735 continue;
1737 uint l = _node_latency[def->_idx] + use->latency(k);
1738 if (latency < l)
1739 latency = l;
1740 }
1742 _node_latency[use->_idx] = latency;
1744 #ifndef PRODUCT
1745 if (_cfg->C->trace_opto_output()) {
1746 tty->print("# latency %4d: ", latency);
1747 use->dump();
1748 }
1749 #endif
1750 }
1752 #ifndef PRODUCT
1753 if (_cfg->C->trace_opto_output())
1754 tty->print("# <- ComputeLocalLatenciesForward\n");
1755 #endif
1757 } // end ComputeLocalLatenciesForward
1759 // See if this node fits into the present instruction bundle
1760 bool Scheduling::NodeFitsInBundle(Node *n) {
1761 uint n_idx = n->_idx;
1763 // If this is the unconditional delay instruction, then it fits
1764 if (n == _unconditional_delay_slot) {
1765 #ifndef PRODUCT
1766 if (_cfg->C->trace_opto_output())
1767 tty->print("# NodeFitsInBundle [%4d]: TRUE; is in unconditional delay slot\n", n->_idx);
1768 #endif
1769 return (true);
1770 }
1772 // If the node cannot be scheduled this cycle, skip it
1773 if (_current_latency[n_idx] > _bundle_cycle_number) {
1774 #ifndef PRODUCT
1775 if (_cfg->C->trace_opto_output())
1776 tty->print("# NodeFitsInBundle [%4d]: FALSE; latency %4d > %d\n",
1777 n->_idx, _current_latency[n_idx], _bundle_cycle_number);
1778 #endif
1779 return (false);
1780 }
1782 const Pipeline *node_pipeline = n->pipeline();
1784 uint instruction_count = node_pipeline->instructionCount();
1785 if (node_pipeline->mayHaveNoCode() && n->size(_regalloc) == 0)
1786 instruction_count = 0;
1787 else if (node_pipeline->hasBranchDelay() && !_unconditional_delay_slot)
1788 instruction_count++;
1790 if (_bundle_instr_count + instruction_count > Pipeline::_max_instrs_per_cycle) {
1791 #ifndef PRODUCT
1792 if (_cfg->C->trace_opto_output())
1793 tty->print("# NodeFitsInBundle [%4d]: FALSE; too many instructions: %d > %d\n",
1794 n->_idx, _bundle_instr_count + instruction_count, Pipeline::_max_instrs_per_cycle);
1795 #endif
1796 return (false);
1797 }
1799 // Don't allow non-machine nodes to be handled this way
1800 if (!n->is_Mach() && instruction_count == 0)
1801 return (false);
1803 // See if there is any overlap
1804 uint delay = _bundle_use.full_latency(0, node_pipeline->resourceUse());
1806 if (delay > 0) {
1807 #ifndef PRODUCT
1808 if (_cfg->C->trace_opto_output())
1809 tty->print("# NodeFitsInBundle [%4d]: FALSE; functional units overlap\n", n_idx);
1810 #endif
1811 return false;
1812 }
1814 #ifndef PRODUCT
1815 if (_cfg->C->trace_opto_output())
1816 tty->print("# NodeFitsInBundle [%4d]: TRUE\n", n_idx);
1817 #endif
1819 return true;
1820 }
1822 Node * Scheduling::ChooseNodeToBundle() {
1823 uint siz = _available.size();
1825 if (siz == 0) {
1827 #ifndef PRODUCT
1828 if (_cfg->C->trace_opto_output())
1829 tty->print("# ChooseNodeToBundle: NULL\n");
1830 #endif
1831 return (NULL);
1832 }
1834 // Fast path, if only 1 instruction in the bundle
1835 if (siz == 1) {
1836 #ifndef PRODUCT
1837 if (_cfg->C->trace_opto_output()) {
1838 tty->print("# ChooseNodeToBundle (only 1): ");
1839 _available[0]->dump();
1840 }
1841 #endif
1842 return (_available[0]);
1843 }
1845 // Don't bother, if the bundle is already full
1846 if (_bundle_instr_count < Pipeline::_max_instrs_per_cycle) {
1847 for ( uint i = 0; i < siz; i++ ) {
1848 Node *n = _available[i];
1850 // Skip projections, we'll handle them another way
1851 if (n->is_Proj())
1852 continue;
1854 // This presupposed that instructions are inserted into the
1855 // available list in a legality order; i.e. instructions that
1856 // must be inserted first are at the head of the list
1857 if (NodeFitsInBundle(n)) {
1858 #ifndef PRODUCT
1859 if (_cfg->C->trace_opto_output()) {
1860 tty->print("# ChooseNodeToBundle: ");
1861 n->dump();
1862 }
1863 #endif
1864 return (n);
1865 }
1866 }
1867 }
1869 // Nothing fits in this bundle, choose the highest priority
1870 #ifndef PRODUCT
1871 if (_cfg->C->trace_opto_output()) {
1872 tty->print("# ChooseNodeToBundle: ");
1873 _available[0]->dump();
1874 }
1875 #endif
1877 return _available[0];
1878 }
1880 //------------------------------AddNodeToAvailableList-------------------------
1881 void Scheduling::AddNodeToAvailableList(Node *n) {
1882 assert( !n->is_Proj(), "projections never directly made available" );
1883 #ifndef PRODUCT
1884 if (_cfg->C->trace_opto_output()) {
1885 tty->print("# AddNodeToAvailableList: ");
1886 n->dump();
1887 }
1888 #endif
1890 int latency = _current_latency[n->_idx];
1892 // Insert in latency order (insertion sort)
1893 uint i;
1894 for ( i=0; i < _available.size(); i++ )
1895 if (_current_latency[_available[i]->_idx] > latency)
1896 break;
1898 // Special Check for compares following branches
1899 if( n->is_Mach() && _scheduled.size() > 0 ) {
1900 int op = n->as_Mach()->ideal_Opcode();
1901 Node *last = _scheduled[0];
1902 if( last->is_MachIf() && last->in(1) == n &&
1903 ( op == Op_CmpI ||
1904 op == Op_CmpU ||
1905 op == Op_CmpP ||
1906 op == Op_CmpF ||
1907 op == Op_CmpD ||
1908 op == Op_CmpL ) ) {
1910 // Recalculate position, moving to front of same latency
1911 for ( i=0 ; i < _available.size(); i++ )
1912 if (_current_latency[_available[i]->_idx] >= latency)
1913 break;
1914 }
1915 }
1917 // Insert the node in the available list
1918 _available.insert(i, n);
1920 #ifndef PRODUCT
1921 if (_cfg->C->trace_opto_output())
1922 dump_available();
1923 #endif
1924 }
1926 //------------------------------DecrementUseCounts-----------------------------
1927 void Scheduling::DecrementUseCounts(Node *n, const Block *bb) {
1928 for ( uint i=0; i < n->len(); i++ ) {
1929 Node *def = n->in(i);
1930 if (!def) continue;
1931 if( def->is_Proj() ) // If this is a machine projection, then
1932 def = def->in(0); // propagate usage thru to the base instruction
1934 if( _bbs[def->_idx] != bb ) // Ignore if not block-local
1935 continue;
1937 // Compute the latency
1938 uint l = _bundle_cycle_number + n->latency(i);
1939 if (_current_latency[def->_idx] < l)
1940 _current_latency[def->_idx] = l;
1942 // If this does not have uses then schedule it
1943 if ((--_uses[def->_idx]) == 0)
1944 AddNodeToAvailableList(def);
1945 }
1946 }
1948 //------------------------------AddNodeToBundle--------------------------------
1949 void Scheduling::AddNodeToBundle(Node *n, const Block *bb) {
1950 #ifndef PRODUCT
1951 if (_cfg->C->trace_opto_output()) {
1952 tty->print("# AddNodeToBundle: ");
1953 n->dump();
1954 }
1955 #endif
1957 // Remove this from the available list
1958 uint i;
1959 for (i = 0; i < _available.size(); i++)
1960 if (_available[i] == n)
1961 break;
1962 assert(i < _available.size(), "entry in _available list not found");
1963 _available.remove(i);
1965 // See if this fits in the current bundle
1966 const Pipeline *node_pipeline = n->pipeline();
1967 const Pipeline_Use& node_usage = node_pipeline->resourceUse();
1969 // Check for instructions to be placed in the delay slot. We
1970 // do this before we actually schedule the current instruction,
1971 // because the delay slot follows the current instruction.
1972 if (Pipeline::_branch_has_delay_slot &&
1973 node_pipeline->hasBranchDelay() &&
1974 !_unconditional_delay_slot) {
1976 uint siz = _available.size();
1978 // Conditional branches can support an instruction that
1979 // is unconditionally executed and not dependent by the
1980 // branch, OR a conditionally executed instruction if
1981 // the branch is taken. In practice, this means that
1982 // the first instruction at the branch target is
1983 // copied to the delay slot, and the branch goes to
1984 // the instruction after that at the branch target
1985 if ( n->is_Mach() && n->is_Branch() ) {
1987 assert( !n->is_MachNullCheck(), "should not look for delay slot for Null Check" );
1988 assert( !n->is_Catch(), "should not look for delay slot for Catch" );
1990 #ifndef PRODUCT
1991 _branches++;
1992 #endif
1994 // At least 1 instruction is on the available list
1995 // that is not dependent on the branch
1996 for (uint i = 0; i < siz; i++) {
1997 Node *d = _available[i];
1998 const Pipeline *avail_pipeline = d->pipeline();
2000 // Don't allow safepoints in the branch shadow, that will
2001 // cause a number of difficulties
2002 if ( avail_pipeline->instructionCount() == 1 &&
2003 !avail_pipeline->hasMultipleBundles() &&
2004 !avail_pipeline->hasBranchDelay() &&
2005 Pipeline::instr_has_unit_size() &&
2006 d->size(_regalloc) == Pipeline::instr_unit_size() &&
2007 NodeFitsInBundle(d) &&
2008 !node_bundling(d)->used_in_delay()) {
2010 if (d->is_Mach() && !d->is_MachSafePoint()) {
2011 // A node that fits in the delay slot was found, so we need to
2012 // set the appropriate bits in the bundle pipeline information so
2013 // that it correctly indicates resource usage. Later, when we
2014 // attempt to add this instruction to the bundle, we will skip
2015 // setting the resource usage.
2016 _unconditional_delay_slot = d;
2017 node_bundling(n)->set_use_unconditional_delay();
2018 node_bundling(d)->set_used_in_unconditional_delay();
2019 _bundle_use.add_usage(avail_pipeline->resourceUse());
2020 _current_latency[d->_idx] = _bundle_cycle_number;
2021 _next_node = d;
2022 ++_bundle_instr_count;
2023 #ifndef PRODUCT
2024 _unconditional_delays++;
2025 #endif
2026 break;
2027 }
2028 }
2029 }
2030 }
2032 // No delay slot, add a nop to the usage
2033 if (!_unconditional_delay_slot) {
2034 // See if adding an instruction in the delay slot will overflow
2035 // the bundle.
2036 if (!NodeFitsInBundle(_nop)) {
2037 #ifndef PRODUCT
2038 if (_cfg->C->trace_opto_output())
2039 tty->print("# *** STEP(1 instruction for delay slot) ***\n");
2040 #endif
2041 step(1);
2042 }
2044 _bundle_use.add_usage(_nop->pipeline()->resourceUse());
2045 _next_node = _nop;
2046 ++_bundle_instr_count;
2047 }
2049 // See if the instruction in the delay slot requires a
2050 // step of the bundles
2051 if (!NodeFitsInBundle(n)) {
2052 #ifndef PRODUCT
2053 if (_cfg->C->trace_opto_output())
2054 tty->print("# *** STEP(branch won't fit) ***\n");
2055 #endif
2056 // Update the state information
2057 _bundle_instr_count = 0;
2058 _bundle_cycle_number += 1;
2059 _bundle_use.step(1);
2060 }
2061 }
2063 // Get the number of instructions
2064 uint instruction_count = node_pipeline->instructionCount();
2065 if (node_pipeline->mayHaveNoCode() && n->size(_regalloc) == 0)
2066 instruction_count = 0;
2068 // Compute the latency information
2069 uint delay = 0;
2071 if (instruction_count > 0 || !node_pipeline->mayHaveNoCode()) {
2072 int relative_latency = _current_latency[n->_idx] - _bundle_cycle_number;
2073 if (relative_latency < 0)
2074 relative_latency = 0;
2076 delay = _bundle_use.full_latency(relative_latency, node_usage);
2078 // Does not fit in this bundle, start a new one
2079 if (delay > 0) {
2080 step(delay);
2082 #ifndef PRODUCT
2083 if (_cfg->C->trace_opto_output())
2084 tty->print("# *** STEP(%d) ***\n", delay);
2085 #endif
2086 }
2087 }
2089 // If this was placed in the delay slot, ignore it
2090 if (n != _unconditional_delay_slot) {
2092 if (delay == 0) {
2093 if (node_pipeline->hasMultipleBundles()) {
2094 #ifndef PRODUCT
2095 if (_cfg->C->trace_opto_output())
2096 tty->print("# *** STEP(multiple instructions) ***\n");
2097 #endif
2098 step(1);
2099 }
2101 else if (instruction_count + _bundle_instr_count > Pipeline::_max_instrs_per_cycle) {
2102 #ifndef PRODUCT
2103 if (_cfg->C->trace_opto_output())
2104 tty->print("# *** STEP(%d >= %d instructions) ***\n",
2105 instruction_count + _bundle_instr_count,
2106 Pipeline::_max_instrs_per_cycle);
2107 #endif
2108 step(1);
2109 }
2110 }
2112 if (node_pipeline->hasBranchDelay() && !_unconditional_delay_slot)
2113 _bundle_instr_count++;
2115 // Set the node's latency
2116 _current_latency[n->_idx] = _bundle_cycle_number;
2118 // Now merge the functional unit information
2119 if (instruction_count > 0 || !node_pipeline->mayHaveNoCode())
2120 _bundle_use.add_usage(node_usage);
2122 // Increment the number of instructions in this bundle
2123 _bundle_instr_count += instruction_count;
2125 // Remember this node for later
2126 if (n->is_Mach())
2127 _next_node = n;
2128 }
2130 // It's possible to have a BoxLock in the graph and in the _bbs mapping but
2131 // not in the bb->_nodes array. This happens for debug-info-only BoxLocks.
2132 // 'Schedule' them (basically ignore in the schedule) but do not insert them
2133 // into the block. All other scheduled nodes get put in the schedule here.
2134 int op = n->Opcode();
2135 if( (op == Op_Node && n->req() == 0) || // anti-dependence node OR
2136 (op != Op_Node && // Not an unused antidepedence node and
2137 // not an unallocated boxlock
2138 (OptoReg::is_valid(_regalloc->get_reg_first(n)) || op != Op_BoxLock)) ) {
2140 // Push any trailing projections
2141 if( bb->_nodes[bb->_nodes.size()-1] != n ) {
2142 for (DUIterator_Fast imax, i = n->fast_outs(imax); i < imax; i++) {
2143 Node *foi = n->fast_out(i);
2144 if( foi->is_Proj() )
2145 _scheduled.push(foi);
2146 }
2147 }
2149 // Put the instruction in the schedule list
2150 _scheduled.push(n);
2151 }
2153 #ifndef PRODUCT
2154 if (_cfg->C->trace_opto_output())
2155 dump_available();
2156 #endif
2158 // Walk all the definitions, decrementing use counts, and
2159 // if a definition has a 0 use count, place it in the available list.
2160 DecrementUseCounts(n,bb);
2161 }
2163 //------------------------------ComputeUseCount--------------------------------
2164 // This method sets the use count within a basic block. We will ignore all
2165 // uses outside the current basic block. As we are doing a backwards walk,
2166 // any node we reach that has a use count of 0 may be scheduled. This also
2167 // avoids the problem of cyclic references from phi nodes, as long as phi
2168 // nodes are at the front of the basic block. This method also initializes
2169 // the available list to the set of instructions that have no uses within this
2170 // basic block.
2171 void Scheduling::ComputeUseCount(const Block *bb) {
2172 #ifndef PRODUCT
2173 if (_cfg->C->trace_opto_output())
2174 tty->print("# -> ComputeUseCount\n");
2175 #endif
2177 // Clear the list of available and scheduled instructions, just in case
2178 _available.clear();
2179 _scheduled.clear();
2181 // No delay slot specified
2182 _unconditional_delay_slot = NULL;
2184 #ifdef ASSERT
2185 for( uint i=0; i < bb->_nodes.size(); i++ )
2186 assert( _uses[bb->_nodes[i]->_idx] == 0, "_use array not clean" );
2187 #endif
2189 // Force the _uses count to never go to zero for unscheduable pieces
2190 // of the block
2191 for( uint k = 0; k < _bb_start; k++ )
2192 _uses[bb->_nodes[k]->_idx] = 1;
2193 for( uint l = _bb_end; l < bb->_nodes.size(); l++ )
2194 _uses[bb->_nodes[l]->_idx] = 1;
2196 // Iterate backwards over the instructions in the block. Don't count the
2197 // branch projections at end or the block header instructions.
2198 for( uint j = _bb_end-1; j >= _bb_start; j-- ) {
2199 Node *n = bb->_nodes[j];
2200 if( n->is_Proj() ) continue; // Projections handled another way
2202 // Account for all uses
2203 for ( uint k = 0; k < n->len(); k++ ) {
2204 Node *inp = n->in(k);
2205 if (!inp) continue;
2206 assert(inp != n, "no cycles allowed" );
2207 if( _bbs[inp->_idx] == bb ) { // Block-local use?
2208 if( inp->is_Proj() ) // Skip through Proj's
2209 inp = inp->in(0);
2210 ++_uses[inp->_idx]; // Count 1 block-local use
2211 }
2212 }
2214 // If this instruction has a 0 use count, then it is available
2215 if (!_uses[n->_idx]) {
2216 _current_latency[n->_idx] = _bundle_cycle_number;
2217 AddNodeToAvailableList(n);
2218 }
2220 #ifndef PRODUCT
2221 if (_cfg->C->trace_opto_output()) {
2222 tty->print("# uses: %3d: ", _uses[n->_idx]);
2223 n->dump();
2224 }
2225 #endif
2226 }
2228 #ifndef PRODUCT
2229 if (_cfg->C->trace_opto_output())
2230 tty->print("# <- ComputeUseCount\n");
2231 #endif
2232 }
2234 // This routine performs scheduling on each basic block in reverse order,
2235 // using instruction latencies and taking into account function unit
2236 // availability.
2237 void Scheduling::DoScheduling() {
2238 #ifndef PRODUCT
2239 if (_cfg->C->trace_opto_output())
2240 tty->print("# -> DoScheduling\n");
2241 #endif
2243 Block *succ_bb = NULL;
2244 Block *bb;
2246 // Walk over all the basic blocks in reverse order
2247 for( int i=_cfg->_num_blocks-1; i >= 0; succ_bb = bb, i-- ) {
2248 bb = _cfg->_blocks[i];
2250 #ifndef PRODUCT
2251 if (_cfg->C->trace_opto_output()) {
2252 tty->print("# Schedule BB#%03d (initial)\n", i);
2253 for (uint j = 0; j < bb->_nodes.size(); j++)
2254 bb->_nodes[j]->dump();
2255 }
2256 #endif
2258 // On the head node, skip processing
2259 if( bb == _cfg->_broot )
2260 continue;
2262 // Skip empty, connector blocks
2263 if (bb->is_connector())
2264 continue;
2266 // If the following block is not the sole successor of
2267 // this one, then reset the pipeline information
2268 if (bb->_num_succs != 1 || bb->non_connector_successor(0) != succ_bb) {
2269 #ifndef PRODUCT
2270 if (_cfg->C->trace_opto_output()) {
2271 tty->print("*** bundle start of next BB, node %d, for %d instructions\n",
2272 _next_node->_idx, _bundle_instr_count);
2273 }
2274 #endif
2275 step_and_clear();
2276 }
2278 // Leave untouched the starting instruction, any Phis, a CreateEx node
2279 // or Top. bb->_nodes[_bb_start] is the first schedulable instruction.
2280 _bb_end = bb->_nodes.size()-1;
2281 for( _bb_start=1; _bb_start <= _bb_end; _bb_start++ ) {
2282 Node *n = bb->_nodes[_bb_start];
2283 // Things not matched, like Phinodes and ProjNodes don't get scheduled.
2284 // Also, MachIdealNodes do not get scheduled
2285 if( !n->is_Mach() ) continue; // Skip non-machine nodes
2286 MachNode *mach = n->as_Mach();
2287 int iop = mach->ideal_Opcode();
2288 if( iop == Op_CreateEx ) continue; // CreateEx is pinned
2289 if( iop == Op_Con ) continue; // Do not schedule Top
2290 if( iop == Op_Node && // Do not schedule PhiNodes, ProjNodes
2291 mach->pipeline() == MachNode::pipeline_class() &&
2292 !n->is_SpillCopy() ) // Breakpoints, Prolog, etc
2293 continue;
2294 break; // Funny loop structure to be sure...
2295 }
2296 // Compute last "interesting" instruction in block - last instruction we
2297 // might schedule. _bb_end points just after last schedulable inst. We
2298 // normally schedule conditional branches (despite them being forced last
2299 // in the block), because they have delay slots we can fill. Calls all
2300 // have their delay slots filled in the template expansions, so we don't
2301 // bother scheduling them.
2302 Node *last = bb->_nodes[_bb_end];
2303 if( last->is_Catch() ||
2304 // Exclude unreachable path case when Halt node is in a separate block.
2305 (_bb_end > 1 && last->is_Mach() && last->as_Mach()->ideal_Opcode() == Op_Halt) ) {
2306 // There must be a prior call. Skip it.
2307 while( !bb->_nodes[--_bb_end]->is_Call() ) {
2308 assert( bb->_nodes[_bb_end]->is_Proj(), "skipping projections after expected call" );
2309 }
2310 } else if( last->is_MachNullCheck() ) {
2311 // Backup so the last null-checked memory instruction is
2312 // outside the schedulable range. Skip over the nullcheck,
2313 // projection, and the memory nodes.
2314 Node *mem = last->in(1);
2315 do {
2316 _bb_end--;
2317 } while (mem != bb->_nodes[_bb_end]);
2318 } else {
2319 // Set _bb_end to point after last schedulable inst.
2320 _bb_end++;
2321 }
2323 assert( _bb_start <= _bb_end, "inverted block ends" );
2325 // Compute the register antidependencies for the basic block
2326 ComputeRegisterAntidependencies(bb);
2327 if (_cfg->C->failing()) return; // too many D-U pinch points
2329 // Compute intra-bb latencies for the nodes
2330 ComputeLocalLatenciesForward(bb);
2332 // Compute the usage within the block, and set the list of all nodes
2333 // in the block that have no uses within the block.
2334 ComputeUseCount(bb);
2336 // Schedule the remaining instructions in the block
2337 while ( _available.size() > 0 ) {
2338 Node *n = ChooseNodeToBundle();
2339 AddNodeToBundle(n,bb);
2340 }
2342 assert( _scheduled.size() == _bb_end - _bb_start, "wrong number of instructions" );
2343 #ifdef ASSERT
2344 for( uint l = _bb_start; l < _bb_end; l++ ) {
2345 Node *n = bb->_nodes[l];
2346 uint m;
2347 for( m = 0; m < _bb_end-_bb_start; m++ )
2348 if( _scheduled[m] == n )
2349 break;
2350 assert( m < _bb_end-_bb_start, "instruction missing in schedule" );
2351 }
2352 #endif
2354 // Now copy the instructions (in reverse order) back to the block
2355 for ( uint k = _bb_start; k < _bb_end; k++ )
2356 bb->_nodes.map(k, _scheduled[_bb_end-k-1]);
2358 #ifndef PRODUCT
2359 if (_cfg->C->trace_opto_output()) {
2360 tty->print("# Schedule BB#%03d (final)\n", i);
2361 uint current = 0;
2362 for (uint j = 0; j < bb->_nodes.size(); j++) {
2363 Node *n = bb->_nodes[j];
2364 if( valid_bundle_info(n) ) {
2365 Bundle *bundle = node_bundling(n);
2366 if (bundle->instr_count() > 0 || bundle->flags() > 0) {
2367 tty->print("*** Bundle: ");
2368 bundle->dump();
2369 }
2370 n->dump();
2371 }
2372 }
2373 }
2374 #endif
2375 #ifdef ASSERT
2376 verify_good_schedule(bb,"after block local scheduling");
2377 #endif
2378 }
2380 #ifndef PRODUCT
2381 if (_cfg->C->trace_opto_output())
2382 tty->print("# <- DoScheduling\n");
2383 #endif
2385 // Record final node-bundling array location
2386 _regalloc->C->set_node_bundling_base(_node_bundling_base);
2388 } // end DoScheduling
2390 //------------------------------verify_good_schedule---------------------------
2391 // Verify that no live-range used in the block is killed in the block by a
2392 // wrong DEF. This doesn't verify live-ranges that span blocks.
2394 // Check for edge existence. Used to avoid adding redundant precedence edges.
2395 static bool edge_from_to( Node *from, Node *to ) {
2396 for( uint i=0; i<from->len(); i++ )
2397 if( from->in(i) == to )
2398 return true;
2399 return false;
2400 }
2402 #ifdef ASSERT
2403 //------------------------------verify_do_def----------------------------------
2404 void Scheduling::verify_do_def( Node *n, OptoReg::Name def, const char *msg ) {
2405 // Check for bad kills
2406 if( OptoReg::is_valid(def) ) { // Ignore stores & control flow
2407 Node *prior_use = _reg_node[def];
2408 if( prior_use && !edge_from_to(prior_use,n) ) {
2409 tty->print("%s = ",OptoReg::as_VMReg(def)->name());
2410 n->dump();
2411 tty->print_cr("...");
2412 prior_use->dump();
2413 assert(edge_from_to(prior_use,n),msg);
2414 }
2415 _reg_node.map(def,NULL); // Kill live USEs
2416 }
2417 }
2419 //------------------------------verify_good_schedule---------------------------
2420 void Scheduling::verify_good_schedule( Block *b, const char *msg ) {
2422 // Zap to something reasonable for the verify code
2423 _reg_node.clear();
2425 // Walk over the block backwards. Check to make sure each DEF doesn't
2426 // kill a live value (other than the one it's supposed to). Add each
2427 // USE to the live set.
2428 for( uint i = b->_nodes.size()-1; i >= _bb_start; i-- ) {
2429 Node *n = b->_nodes[i];
2430 int n_op = n->Opcode();
2431 if( n_op == Op_MachProj && n->ideal_reg() == MachProjNode::fat_proj ) {
2432 // Fat-proj kills a slew of registers
2433 RegMask rm = n->out_RegMask();// Make local copy
2434 while( rm.is_NotEmpty() ) {
2435 OptoReg::Name kill = rm.find_first_elem();
2436 rm.Remove(kill);
2437 verify_do_def( n, kill, msg );
2438 }
2439 } else if( n_op != Op_Node ) { // Avoid brand new antidependence nodes
2440 // Get DEF'd registers the normal way
2441 verify_do_def( n, _regalloc->get_reg_first(n), msg );
2442 verify_do_def( n, _regalloc->get_reg_second(n), msg );
2443 }
2445 // Now make all USEs live
2446 for( uint i=1; i<n->req(); i++ ) {
2447 Node *def = n->in(i);
2448 assert(def != 0, "input edge required");
2449 OptoReg::Name reg_lo = _regalloc->get_reg_first(def);
2450 OptoReg::Name reg_hi = _regalloc->get_reg_second(def);
2451 if( OptoReg::is_valid(reg_lo) ) {
2452 assert(!_reg_node[reg_lo] || edge_from_to(_reg_node[reg_lo],def), msg);
2453 _reg_node.map(reg_lo,n);
2454 }
2455 if( OptoReg::is_valid(reg_hi) ) {
2456 assert(!_reg_node[reg_hi] || edge_from_to(_reg_node[reg_hi],def), msg);
2457 _reg_node.map(reg_hi,n);
2458 }
2459 }
2461 }
2463 // Zap to something reasonable for the Antidependence code
2464 _reg_node.clear();
2465 }
2466 #endif
2468 // Conditionally add precedence edges. Avoid putting edges on Projs.
2469 static void add_prec_edge_from_to( Node *from, Node *to ) {
2470 if( from->is_Proj() ) { // Put precedence edge on Proj's input
2471 assert( from->req() == 1 && (from->len() == 1 || from->in(1)==0), "no precedence edges on projections" );
2472 from = from->in(0);
2473 }
2474 if( from != to && // No cycles (for things like LD L0,[L0+4] )
2475 !edge_from_to( from, to ) ) // Avoid duplicate edge
2476 from->add_prec(to);
2477 }
2479 //------------------------------anti_do_def------------------------------------
2480 void Scheduling::anti_do_def( Block *b, Node *def, OptoReg::Name def_reg, int is_def ) {
2481 if( !OptoReg::is_valid(def_reg) ) // Ignore stores & control flow
2482 return;
2484 Node *pinch = _reg_node[def_reg]; // Get pinch point
2485 if( !pinch || _bbs[pinch->_idx] != b || // No pinch-point yet?
2486 is_def ) { // Check for a true def (not a kill)
2487 _reg_node.map(def_reg,def); // Record def/kill as the optimistic pinch-point
2488 return;
2489 }
2491 Node *kill = def; // Rename 'def' to more descriptive 'kill'
2492 debug_only( def = (Node*)0xdeadbeef; )
2494 // After some number of kills there _may_ be a later def
2495 Node *later_def = NULL;
2497 // Finding a kill requires a real pinch-point.
2498 // Check for not already having a pinch-point.
2499 // Pinch points are Op_Node's.
2500 if( pinch->Opcode() != Op_Node ) { // Or later-def/kill as pinch-point?
2501 later_def = pinch; // Must be def/kill as optimistic pinch-point
2502 if ( _pinch_free_list.size() > 0) {
2503 pinch = _pinch_free_list.pop();
2504 } else {
2505 pinch = new (_cfg->C, 1) Node(1); // Pinch point to-be
2506 }
2507 if (pinch->_idx >= _regalloc->node_regs_max_index()) {
2508 _cfg->C->record_method_not_compilable("too many D-U pinch points");
2509 return;
2510 }
2511 _bbs.map(pinch->_idx,b); // Pretend it's valid in this block (lazy init)
2512 _reg_node.map(def_reg,pinch); // Record pinch-point
2513 //_regalloc->set_bad(pinch->_idx); // Already initialized this way.
2514 if( later_def->outcnt() == 0 || later_def->ideal_reg() == MachProjNode::fat_proj ) { // Distinguish def from kill
2515 pinch->init_req(0, _cfg->C->top()); // set not NULL for the next call
2516 add_prec_edge_from_to(later_def,pinch); // Add edge from kill to pinch
2517 later_def = NULL; // and no later def
2518 }
2519 pinch->set_req(0,later_def); // Hook later def so we can find it
2520 } else { // Else have valid pinch point
2521 if( pinch->in(0) ) // If there is a later-def
2522 later_def = pinch->in(0); // Get it
2523 }
2525 // Add output-dependence edge from later def to kill
2526 if( later_def ) // If there is some original def
2527 add_prec_edge_from_to(later_def,kill); // Add edge from def to kill
2529 // See if current kill is also a use, and so is forced to be the pinch-point.
2530 if( pinch->Opcode() == Op_Node ) {
2531 Node *uses = kill->is_Proj() ? kill->in(0) : kill;
2532 for( uint i=1; i<uses->req(); i++ ) {
2533 if( _regalloc->get_reg_first(uses->in(i)) == def_reg ||
2534 _regalloc->get_reg_second(uses->in(i)) == def_reg ) {
2535 // Yes, found a use/kill pinch-point
2536 pinch->set_req(0,NULL); //
2537 pinch->replace_by(kill); // Move anti-dep edges up
2538 pinch = kill;
2539 _reg_node.map(def_reg,pinch);
2540 return;
2541 }
2542 }
2543 }
2545 // Add edge from kill to pinch-point
2546 add_prec_edge_from_to(kill,pinch);
2547 }
2549 //------------------------------anti_do_use------------------------------------
2550 void Scheduling::anti_do_use( Block *b, Node *use, OptoReg::Name use_reg ) {
2551 if( !OptoReg::is_valid(use_reg) ) // Ignore stores & control flow
2552 return;
2553 Node *pinch = _reg_node[use_reg]; // Get pinch point
2554 // Check for no later def_reg/kill in block
2555 if( pinch && _bbs[pinch->_idx] == b &&
2556 // Use has to be block-local as well
2557 _bbs[use->_idx] == b ) {
2558 if( pinch->Opcode() == Op_Node && // Real pinch-point (not optimistic?)
2559 pinch->req() == 1 ) { // pinch not yet in block?
2560 pinch->del_req(0); // yank pointer to later-def, also set flag
2561 // Insert the pinch-point in the block just after the last use
2562 b->_nodes.insert(b->find_node(use)+1,pinch);
2563 _bb_end++; // Increase size scheduled region in block
2564 }
2566 add_prec_edge_from_to(pinch,use);
2567 }
2568 }
2570 //------------------------------ComputeRegisterAntidependences-----------------
2571 // We insert antidependences between the reads and following write of
2572 // allocated registers to prevent illegal code motion. Hopefully, the
2573 // number of added references should be fairly small, especially as we
2574 // are only adding references within the current basic block.
2575 void Scheduling::ComputeRegisterAntidependencies(Block *b) {
2577 #ifdef ASSERT
2578 verify_good_schedule(b,"before block local scheduling");
2579 #endif
2581 // A valid schedule, for each register independently, is an endless cycle
2582 // of: a def, then some uses (connected to the def by true dependencies),
2583 // then some kills (defs with no uses), finally the cycle repeats with a new
2584 // def. The uses are allowed to float relative to each other, as are the
2585 // kills. No use is allowed to slide past a kill (or def). This requires
2586 // antidependencies between all uses of a single def and all kills that
2587 // follow, up to the next def. More edges are redundant, because later defs
2588 // & kills are already serialized with true or antidependencies. To keep
2589 // the edge count down, we add a 'pinch point' node if there's more than
2590 // one use or more than one kill/def.
2592 // We add dependencies in one bottom-up pass.
2594 // For each instruction we handle it's DEFs/KILLs, then it's USEs.
2596 // For each DEF/KILL, we check to see if there's a prior DEF/KILL for this
2597 // register. If not, we record the DEF/KILL in _reg_node, the
2598 // register-to-def mapping. If there is a prior DEF/KILL, we insert a
2599 // "pinch point", a new Node that's in the graph but not in the block.
2600 // We put edges from the prior and current DEF/KILLs to the pinch point.
2601 // We put the pinch point in _reg_node. If there's already a pinch point
2602 // we merely add an edge from the current DEF/KILL to the pinch point.
2604 // After doing the DEF/KILLs, we handle USEs. For each used register, we
2605 // put an edge from the pinch point to the USE.
2607 // To be expedient, the _reg_node array is pre-allocated for the whole
2608 // compilation. _reg_node is lazily initialized; it either contains a NULL,
2609 // or a valid def/kill/pinch-point, or a leftover node from some prior
2610 // block. Leftover node from some prior block is treated like a NULL (no
2611 // prior def, so no anti-dependence needed). Valid def is distinguished by
2612 // it being in the current block.
2613 bool fat_proj_seen = false;
2614 uint last_safept = _bb_end-1;
2615 Node* end_node = (_bb_end-1 >= _bb_start) ? b->_nodes[last_safept] : NULL;
2616 Node* last_safept_node = end_node;
2617 for( uint i = _bb_end-1; i >= _bb_start; i-- ) {
2618 Node *n = b->_nodes[i];
2619 int is_def = n->outcnt(); // def if some uses prior to adding precedence edges
2620 if( n->Opcode() == Op_MachProj && n->ideal_reg() == MachProjNode::fat_proj ) {
2621 // Fat-proj kills a slew of registers
2622 // This can add edges to 'n' and obscure whether or not it was a def,
2623 // hence the is_def flag.
2624 fat_proj_seen = true;
2625 RegMask rm = n->out_RegMask();// Make local copy
2626 while( rm.is_NotEmpty() ) {
2627 OptoReg::Name kill = rm.find_first_elem();
2628 rm.Remove(kill);
2629 anti_do_def( b, n, kill, is_def );
2630 }
2631 } else {
2632 // Get DEF'd registers the normal way
2633 anti_do_def( b, n, _regalloc->get_reg_first(n), is_def );
2634 anti_do_def( b, n, _regalloc->get_reg_second(n), is_def );
2635 }
2637 // Check each register used by this instruction for a following DEF/KILL
2638 // that must occur afterward and requires an anti-dependence edge.
2639 for( uint j=0; j<n->req(); j++ ) {
2640 Node *def = n->in(j);
2641 if( def ) {
2642 assert( def->Opcode() != Op_MachProj || def->ideal_reg() != MachProjNode::fat_proj, "" );
2643 anti_do_use( b, n, _regalloc->get_reg_first(def) );
2644 anti_do_use( b, n, _regalloc->get_reg_second(def) );
2645 }
2646 }
2647 // Do not allow defs of new derived values to float above GC
2648 // points unless the base is definitely available at the GC point.
2650 Node *m = b->_nodes[i];
2652 // Add precedence edge from following safepoint to use of derived pointer
2653 if( last_safept_node != end_node &&
2654 m != last_safept_node) {
2655 for (uint k = 1; k < m->req(); k++) {
2656 const Type *t = m->in(k)->bottom_type();
2657 if( t->isa_oop_ptr() &&
2658 t->is_ptr()->offset() != 0 ) {
2659 last_safept_node->add_prec( m );
2660 break;
2661 }
2662 }
2663 }
2665 if( n->jvms() ) { // Precedence edge from derived to safept
2666 // Check if last_safept_node was moved by pinch-point insertion in anti_do_use()
2667 if( b->_nodes[last_safept] != last_safept_node ) {
2668 last_safept = b->find_node(last_safept_node);
2669 }
2670 for( uint j=last_safept; j > i; j-- ) {
2671 Node *mach = b->_nodes[j];
2672 if( mach->is_Mach() && mach->as_Mach()->ideal_Opcode() == Op_AddP )
2673 mach->add_prec( n );
2674 }
2675 last_safept = i;
2676 last_safept_node = m;
2677 }
2678 }
2680 if (fat_proj_seen) {
2681 // Garbage collect pinch nodes that were not consumed.
2682 // They are usually created by a fat kill MachProj for a call.
2683 garbage_collect_pinch_nodes();
2684 }
2685 }
2687 //------------------------------garbage_collect_pinch_nodes-------------------------------
2689 // Garbage collect pinch nodes for reuse by other blocks.
2690 //
2691 // The block scheduler's insertion of anti-dependence
2692 // edges creates many pinch nodes when the block contains
2693 // 2 or more Calls. A pinch node is used to prevent a
2694 // combinatorial explosion of edges. If a set of kills for a
2695 // register is anti-dependent on a set of uses (or defs), rather
2696 // than adding an edge in the graph between each pair of kill
2697 // and use (or def), a pinch is inserted between them:
2698 //
2699 // use1 use2 use3
2700 // \ | /
2701 // \ | /
2702 // pinch
2703 // / | \
2704 // / | \
2705 // kill1 kill2 kill3
2706 //
2707 // One pinch node is created per register killed when
2708 // the second call is encountered during a backwards pass
2709 // over the block. Most of these pinch nodes are never
2710 // wired into the graph because the register is never
2711 // used or def'ed in the block.
2712 //
2713 void Scheduling::garbage_collect_pinch_nodes() {
2714 #ifndef PRODUCT
2715 if (_cfg->C->trace_opto_output()) tty->print("Reclaimed pinch nodes:");
2716 #endif
2717 int trace_cnt = 0;
2718 for (uint k = 0; k < _reg_node.Size(); k++) {
2719 Node* pinch = _reg_node[k];
2720 if (pinch != NULL && pinch->Opcode() == Op_Node &&
2721 // no predecence input edges
2722 (pinch->req() == pinch->len() || pinch->in(pinch->req()) == NULL) ) {
2723 cleanup_pinch(pinch);
2724 _pinch_free_list.push(pinch);
2725 _reg_node.map(k, NULL);
2726 #ifndef PRODUCT
2727 if (_cfg->C->trace_opto_output()) {
2728 trace_cnt++;
2729 if (trace_cnt > 40) {
2730 tty->print("\n");
2731 trace_cnt = 0;
2732 }
2733 tty->print(" %d", pinch->_idx);
2734 }
2735 #endif
2736 }
2737 }
2738 #ifndef PRODUCT
2739 if (_cfg->C->trace_opto_output()) tty->print("\n");
2740 #endif
2741 }
2743 // Clean up a pinch node for reuse.
2744 void Scheduling::cleanup_pinch( Node *pinch ) {
2745 assert (pinch && pinch->Opcode() == Op_Node && pinch->req() == 1, "just checking");
2747 for (DUIterator_Last imin, i = pinch->last_outs(imin); i >= imin; ) {
2748 Node* use = pinch->last_out(i);
2749 uint uses_found = 0;
2750 for (uint j = use->req(); j < use->len(); j++) {
2751 if (use->in(j) == pinch) {
2752 use->rm_prec(j);
2753 uses_found++;
2754 }
2755 }
2756 assert(uses_found > 0, "must be a precedence edge");
2757 i -= uses_found; // we deleted 1 or more copies of this edge
2758 }
2759 // May have a later_def entry
2760 pinch->set_req(0, NULL);
2761 }
2763 //------------------------------print_statistics-------------------------------
2764 #ifndef PRODUCT
2766 void Scheduling::dump_available() const {
2767 tty->print("#Availist ");
2768 for (uint i = 0; i < _available.size(); i++)
2769 tty->print(" N%d/l%d", _available[i]->_idx,_current_latency[_available[i]->_idx]);
2770 tty->cr();
2771 }
2773 // Print Scheduling Statistics
2774 void Scheduling::print_statistics() {
2775 // Print the size added by nops for bundling
2776 tty->print("Nops added %d bytes to total of %d bytes",
2777 _total_nop_size, _total_method_size);
2778 if (_total_method_size > 0)
2779 tty->print(", for %.2f%%",
2780 ((double)_total_nop_size) / ((double) _total_method_size) * 100.0);
2781 tty->print("\n");
2783 // Print the number of branch shadows filled
2784 if (Pipeline::_branch_has_delay_slot) {
2785 tty->print("Of %d branches, %d had unconditional delay slots filled",
2786 _total_branches, _total_unconditional_delays);
2787 if (_total_branches > 0)
2788 tty->print(", for %.2f%%",
2789 ((double)_total_unconditional_delays) / ((double)_total_branches) * 100.0);
2790 tty->print("\n");
2791 }
2793 uint total_instructions = 0, total_bundles = 0;
2795 for (uint i = 1; i <= Pipeline::_max_instrs_per_cycle; i++) {
2796 uint bundle_count = _total_instructions_per_bundle[i];
2797 total_instructions += bundle_count * i;
2798 total_bundles += bundle_count;
2799 }
2801 if (total_bundles > 0)
2802 tty->print("Average ILP (excluding nops) is %.2f\n",
2803 ((double)total_instructions) / ((double)total_bundles));
2804 }
2805 #endif