Thu, 14 Apr 2011 13:45:41 -0700
Merge
1 /*
2 * Copyright (c) 2003, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/assembler.hpp"
27 #include "interpreter/bytecodeHistogram.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "interpreter/interpreterGenerator.hpp"
30 #include "interpreter/interpreterRuntime.hpp"
31 #include "interpreter/templateTable.hpp"
32 #include "oops/arrayOop.hpp"
33 #include "oops/methodDataOop.hpp"
34 #include "oops/methodOop.hpp"
35 #include "oops/oop.inline.hpp"
36 #include "prims/jvmtiExport.hpp"
37 #include "prims/jvmtiThreadState.hpp"
38 #include "runtime/arguments.hpp"
39 #include "runtime/deoptimization.hpp"
40 #include "runtime/frame.inline.hpp"
41 #include "runtime/sharedRuntime.hpp"
42 #include "runtime/stubRoutines.hpp"
43 #include "runtime/synchronizer.hpp"
44 #include "runtime/timer.hpp"
45 #include "runtime/vframeArray.hpp"
46 #include "utilities/debug.hpp"
48 #define __ _masm->
50 #ifndef CC_INTERP
52 const int method_offset = frame::interpreter_frame_method_offset * wordSize;
53 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize;
54 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize;
56 //-----------------------------------------------------------------------------
58 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
59 address entry = __ pc();
61 #ifdef ASSERT
62 {
63 Label L;
64 __ lea(rax, Address(rbp,
65 frame::interpreter_frame_monitor_block_top_offset *
66 wordSize));
67 __ cmpptr(rax, rsp); // rax = maximal rsp for current rbp (stack
68 // grows negative)
69 __ jcc(Assembler::aboveEqual, L); // check if frame is complete
70 __ stop ("interpreter frame not set up");
71 __ bind(L);
72 }
73 #endif // ASSERT
74 // Restore bcp under the assumption that the current frame is still
75 // interpreted
76 __ restore_bcp();
78 // expression stack must be empty before entering the VM if an
79 // exception happened
80 __ empty_expression_stack();
81 // throw exception
82 __ call_VM(noreg,
83 CAST_FROM_FN_PTR(address,
84 InterpreterRuntime::throw_StackOverflowError));
85 return entry;
86 }
88 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(
89 const char* name) {
90 address entry = __ pc();
91 // expression stack must be empty before entering the VM if an
92 // exception happened
93 __ empty_expression_stack();
94 // setup parameters
95 // ??? convention: expect aberrant index in register ebx
96 __ lea(c_rarg1, ExternalAddress((address)name));
97 __ call_VM(noreg,
98 CAST_FROM_FN_PTR(address,
99 InterpreterRuntime::
100 throw_ArrayIndexOutOfBoundsException),
101 c_rarg1, rbx);
102 return entry;
103 }
105 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
106 address entry = __ pc();
108 // object is at TOS
109 __ pop(c_rarg1);
111 // expression stack must be empty before entering the VM if an
112 // exception happened
113 __ empty_expression_stack();
115 __ call_VM(noreg,
116 CAST_FROM_FN_PTR(address,
117 InterpreterRuntime::
118 throw_ClassCastException),
119 c_rarg1);
120 return entry;
121 }
123 // Arguments are: required type at TOS+8, failing object (or NULL) at TOS+4.
124 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
125 address entry = __ pc();
127 __ pop(c_rarg2); // failing object is at TOS
128 __ pop(c_rarg1); // required type is at TOS+8
130 __ verify_oop(c_rarg1);
131 __ verify_oop(c_rarg2);
133 // Various method handle types use interpreter registers as temps.
134 __ restore_bcp();
135 __ restore_locals();
137 // Expression stack must be empty before entering the VM for an exception.
138 __ empty_expression_stack();
140 __ call_VM(noreg,
141 CAST_FROM_FN_PTR(address,
142 InterpreterRuntime::throw_WrongMethodTypeException),
143 // pass required type, failing object (or NULL)
144 c_rarg1, c_rarg2);
145 return entry;
146 }
148 address TemplateInterpreterGenerator::generate_exception_handler_common(
149 const char* name, const char* message, bool pass_oop) {
150 assert(!pass_oop || message == NULL, "either oop or message but not both");
151 address entry = __ pc();
152 if (pass_oop) {
153 // object is at TOS
154 __ pop(c_rarg2);
155 }
156 // expression stack must be empty before entering the VM if an
157 // exception happened
158 __ empty_expression_stack();
159 // setup parameters
160 __ lea(c_rarg1, ExternalAddress((address)name));
161 if (pass_oop) {
162 __ call_VM(rax, CAST_FROM_FN_PTR(address,
163 InterpreterRuntime::
164 create_klass_exception),
165 c_rarg1, c_rarg2);
166 } else {
167 // kind of lame ExternalAddress can't take NULL because
168 // external_word_Relocation will assert.
169 if (message != NULL) {
170 __ lea(c_rarg2, ExternalAddress((address)message));
171 } else {
172 __ movptr(c_rarg2, NULL_WORD);
173 }
174 __ call_VM(rax,
175 CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception),
176 c_rarg1, c_rarg2);
177 }
178 // throw exception
179 __ jump(ExternalAddress(Interpreter::throw_exception_entry()));
180 return entry;
181 }
184 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
185 address entry = __ pc();
186 // NULL last_sp until next java call
187 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
188 __ dispatch_next(state);
189 return entry;
190 }
193 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
194 address entry = __ pc();
196 // Restore stack bottom in case i2c adjusted stack
197 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
198 // and NULL it as marker that esp is now tos until next java call
199 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
201 __ restore_bcp();
202 __ restore_locals();
204 Label L_got_cache, L_giant_index;
205 if (EnableInvokeDynamic) {
206 __ cmpb(Address(r13, 0), Bytecodes::_invokedynamic);
207 __ jcc(Assembler::equal, L_giant_index);
208 }
209 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u2));
210 __ bind(L_got_cache);
211 __ movl(rbx, Address(rbx, rcx,
212 Address::times_ptr,
213 in_bytes(constantPoolCacheOopDesc::base_offset()) +
214 3 * wordSize));
215 __ andl(rbx, 0xFF);
216 __ lea(rsp, Address(rsp, rbx, Address::times_8));
217 __ dispatch_next(state, step);
219 // out of the main line of code...
220 if (EnableInvokeDynamic) {
221 __ bind(L_giant_index);
222 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u4));
223 __ jmp(L_got_cache);
224 }
226 return entry;
227 }
230 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state,
231 int step) {
232 address entry = __ pc();
233 // NULL last_sp until next java call
234 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
235 __ restore_bcp();
236 __ restore_locals();
237 // handle exceptions
238 {
239 Label L;
240 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
241 __ jcc(Assembler::zero, L);
242 __ call_VM(noreg,
243 CAST_FROM_FN_PTR(address,
244 InterpreterRuntime::throw_pending_exception));
245 __ should_not_reach_here();
246 __ bind(L);
247 }
248 __ dispatch_next(state, step);
249 return entry;
250 }
252 int AbstractInterpreter::BasicType_as_index(BasicType type) {
253 int i = 0;
254 switch (type) {
255 case T_BOOLEAN: i = 0; break;
256 case T_CHAR : i = 1; break;
257 case T_BYTE : i = 2; break;
258 case T_SHORT : i = 3; break;
259 case T_INT : i = 4; break;
260 case T_LONG : i = 5; break;
261 case T_VOID : i = 6; break;
262 case T_FLOAT : i = 7; break;
263 case T_DOUBLE : i = 8; break;
264 case T_OBJECT : i = 9; break;
265 case T_ARRAY : i = 9; break;
266 default : ShouldNotReachHere();
267 }
268 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers,
269 "index out of bounds");
270 return i;
271 }
274 address TemplateInterpreterGenerator::generate_result_handler_for(
275 BasicType type) {
276 address entry = __ pc();
277 switch (type) {
278 case T_BOOLEAN: __ c2bool(rax); break;
279 case T_CHAR : __ movzwl(rax, rax); break;
280 case T_BYTE : __ sign_extend_byte(rax); break;
281 case T_SHORT : __ sign_extend_short(rax); break;
282 case T_INT : /* nothing to do */ break;
283 case T_LONG : /* nothing to do */ break;
284 case T_VOID : /* nothing to do */ break;
285 case T_FLOAT : /* nothing to do */ break;
286 case T_DOUBLE : /* nothing to do */ break;
287 case T_OBJECT :
288 // retrieve result from frame
289 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize));
290 // and verify it
291 __ verify_oop(rax);
292 break;
293 default : ShouldNotReachHere();
294 }
295 __ ret(0); // return from result handler
296 return entry;
297 }
299 address TemplateInterpreterGenerator::generate_safept_entry_for(
300 TosState state,
301 address runtime_entry) {
302 address entry = __ pc();
303 __ push(state);
304 __ call_VM(noreg, runtime_entry);
305 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos));
306 return entry;
307 }
311 // Helpers for commoning out cases in the various type of method entries.
312 //
315 // increment invocation count & check for overflow
316 //
317 // Note: checking for negative value instead of overflow
318 // so we have a 'sticky' overflow test
319 //
320 // rbx: method
321 // ecx: invocation counter
322 //
323 void InterpreterGenerator::generate_counter_incr(
324 Label* overflow,
325 Label* profile_method,
326 Label* profile_method_continue) {
327 const Address invocation_counter(rbx, in_bytes(methodOopDesc::invocation_counter_offset()) +
328 in_bytes(InvocationCounter::counter_offset()));
329 // Note: In tiered we increment either counters in methodOop or in MDO depending if we're profiling or not.
330 if (TieredCompilation) {
331 int increment = InvocationCounter::count_increment;
332 int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift;
333 Label no_mdo, done;
334 if (ProfileInterpreter) {
335 // Are we profiling?
336 __ movptr(rax, Address(rbx, methodOopDesc::method_data_offset()));
337 __ testptr(rax, rax);
338 __ jccb(Assembler::zero, no_mdo);
339 // Increment counter in the MDO
340 const Address mdo_invocation_counter(rax, in_bytes(methodDataOopDesc::invocation_counter_offset()) +
341 in_bytes(InvocationCounter::counter_offset()));
342 __ increment_mask_and_jump(mdo_invocation_counter, increment, mask, rcx, false, Assembler::zero, overflow);
343 __ jmpb(done);
344 }
345 __ bind(no_mdo);
346 // Increment counter in methodOop (we don't need to load it, it's in ecx).
347 __ increment_mask_and_jump(invocation_counter, increment, mask, rcx, true, Assembler::zero, overflow);
348 __ bind(done);
349 } else {
350 const Address backedge_counter(rbx,
351 methodOopDesc::backedge_counter_offset() +
352 InvocationCounter::counter_offset());
354 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
355 __ incrementl(Address(rbx,
356 methodOopDesc::interpreter_invocation_counter_offset()));
357 }
358 // Update standard invocation counters
359 __ movl(rax, backedge_counter); // load backedge counter
361 __ incrementl(rcx, InvocationCounter::count_increment);
362 __ andl(rax, InvocationCounter::count_mask_value); // mask out the status bits
364 __ movl(invocation_counter, rcx); // save invocation count
365 __ addl(rcx, rax); // add both counters
367 // profile_method is non-null only for interpreted method so
368 // profile_method != NULL == !native_call
370 if (ProfileInterpreter && profile_method != NULL) {
371 // Test to see if we should create a method data oop
372 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit));
373 __ jcc(Assembler::less, *profile_method_continue);
375 // if no method data exists, go to profile_method
376 __ test_method_data_pointer(rax, *profile_method);
377 }
379 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit));
380 __ jcc(Assembler::aboveEqual, *overflow);
381 }
382 }
384 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) {
386 // Asm interpreter on entry
387 // r14 - locals
388 // r13 - bcp
389 // rbx - method
390 // edx - cpool --- DOES NOT APPEAR TO BE TRUE
391 // rbp - interpreter frame
393 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ]
394 // Everything as it was on entry
395 // rdx is not restored. Doesn't appear to really be set.
397 const Address size_of_parameters(rbx,
398 methodOopDesc::size_of_parameters_offset());
400 // InterpreterRuntime::frequency_counter_overflow takes two
401 // arguments, the first (thread) is passed by call_VM, the second
402 // indicates if the counter overflow occurs at a backwards branch
403 // (NULL bcp). We pass zero for it. The call returns the address
404 // of the verified entry point for the method or NULL if the
405 // compilation did not complete (either went background or bailed
406 // out).
407 __ movl(c_rarg1, 0);
408 __ call_VM(noreg,
409 CAST_FROM_FN_PTR(address,
410 InterpreterRuntime::frequency_counter_overflow),
411 c_rarg1);
413 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
414 // Preserve invariant that r13/r14 contain bcp/locals of sender frame
415 // and jump to the interpreted entry.
416 __ jmp(*do_continue, relocInfo::none);
417 }
419 // See if we've got enough room on the stack for locals plus overhead.
420 // The expression stack grows down incrementally, so the normal guard
421 // page mechanism will work for that.
422 //
423 // NOTE: Since the additional locals are also always pushed (wasn't
424 // obvious in generate_method_entry) so the guard should work for them
425 // too.
426 //
427 // Args:
428 // rdx: number of additional locals this frame needs (what we must check)
429 // rbx: methodOop
430 //
431 // Kills:
432 // rax
433 void InterpreterGenerator::generate_stack_overflow_check(void) {
435 // monitor entry size: see picture of stack set
436 // (generate_method_entry) and frame_amd64.hpp
437 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
439 // total overhead size: entry_size + (saved rbp through expr stack
440 // bottom). be sure to change this if you add/subtract anything
441 // to/from the overhead area
442 const int overhead_size =
443 -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size;
445 const int page_size = os::vm_page_size();
447 Label after_frame_check;
449 // see if the frame is greater than one page in size. If so,
450 // then we need to verify there is enough stack space remaining
451 // for the additional locals.
452 __ cmpl(rdx, (page_size - overhead_size) / Interpreter::stackElementSize);
453 __ jcc(Assembler::belowEqual, after_frame_check);
455 // compute rsp as if this were going to be the last frame on
456 // the stack before the red zone
458 const Address stack_base(r15_thread, Thread::stack_base_offset());
459 const Address stack_size(r15_thread, Thread::stack_size_offset());
461 // locals + overhead, in bytes
462 __ mov(rax, rdx);
463 __ shlptr(rax, Interpreter::logStackElementSize); // 2 slots per parameter.
464 __ addptr(rax, overhead_size);
466 #ifdef ASSERT
467 Label stack_base_okay, stack_size_okay;
468 // verify that thread stack base is non-zero
469 __ cmpptr(stack_base, (int32_t)NULL_WORD);
470 __ jcc(Assembler::notEqual, stack_base_okay);
471 __ stop("stack base is zero");
472 __ bind(stack_base_okay);
473 // verify that thread stack size is non-zero
474 __ cmpptr(stack_size, 0);
475 __ jcc(Assembler::notEqual, stack_size_okay);
476 __ stop("stack size is zero");
477 __ bind(stack_size_okay);
478 #endif
480 // Add stack base to locals and subtract stack size
481 __ addptr(rax, stack_base);
482 __ subptr(rax, stack_size);
484 // Use the maximum number of pages we might bang.
485 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages :
486 (StackRedPages+StackYellowPages);
488 // add in the red and yellow zone sizes
489 __ addptr(rax, max_pages * page_size);
491 // check against the current stack bottom
492 __ cmpptr(rsp, rax);
493 __ jcc(Assembler::above, after_frame_check);
495 __ pop(rax); // get return address
496 __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry()));
498 // all done with frame size check
499 __ bind(after_frame_check);
500 }
502 // Allocate monitor and lock method (asm interpreter)
503 //
504 // Args:
505 // rbx: methodOop
506 // r14: locals
507 //
508 // Kills:
509 // rax
510 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs)
511 // rscratch1, rscratch2 (scratch regs)
512 void InterpreterGenerator::lock_method(void) {
513 // synchronize method
514 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
515 const Address monitor_block_top(
516 rbp,
517 frame::interpreter_frame_monitor_block_top_offset * wordSize);
518 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
520 #ifdef ASSERT
521 {
522 Label L;
523 __ movl(rax, access_flags);
524 __ testl(rax, JVM_ACC_SYNCHRONIZED);
525 __ jcc(Assembler::notZero, L);
526 __ stop("method doesn't need synchronization");
527 __ bind(L);
528 }
529 #endif // ASSERT
531 // get synchronization object
532 {
533 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
534 Klass::java_mirror_offset_in_bytes();
535 Label done;
536 __ movl(rax, access_flags);
537 __ testl(rax, JVM_ACC_STATIC);
538 // get receiver (assume this is frequent case)
539 __ movptr(rax, Address(r14, Interpreter::local_offset_in_bytes(0)));
540 __ jcc(Assembler::zero, done);
541 __ movptr(rax, Address(rbx, methodOopDesc::constants_offset()));
542 __ movptr(rax, Address(rax,
543 constantPoolOopDesc::pool_holder_offset_in_bytes()));
544 __ movptr(rax, Address(rax, mirror_offset));
546 #ifdef ASSERT
547 {
548 Label L;
549 __ testptr(rax, rax);
550 __ jcc(Assembler::notZero, L);
551 __ stop("synchronization object is NULL");
552 __ bind(L);
553 }
554 #endif // ASSERT
556 __ bind(done);
557 }
559 // add space for monitor & lock
560 __ subptr(rsp, entry_size); // add space for a monitor entry
561 __ movptr(monitor_block_top, rsp); // set new monitor block top
562 // store object
563 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax);
564 __ movptr(c_rarg1, rsp); // object address
565 __ lock_object(c_rarg1);
566 }
568 // Generate a fixed interpreter frame. This is identical setup for
569 // interpreted methods and for native methods hence the shared code.
570 //
571 // Args:
572 // rax: return address
573 // rbx: methodOop
574 // r14: pointer to locals
575 // r13: sender sp
576 // rdx: cp cache
577 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
578 // initialize fixed part of activation frame
579 __ push(rax); // save return address
580 __ enter(); // save old & set new rbp
581 __ push(r13); // set sender sp
582 __ push((int)NULL_WORD); // leave last_sp as null
583 __ movptr(r13, Address(rbx, methodOopDesc::const_offset())); // get constMethodOop
584 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
585 __ push(rbx); // save methodOop
586 if (ProfileInterpreter) {
587 Label method_data_continue;
588 __ movptr(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
589 __ testptr(rdx, rdx);
590 __ jcc(Assembler::zero, method_data_continue);
591 __ addptr(rdx, in_bytes(methodDataOopDesc::data_offset()));
592 __ bind(method_data_continue);
593 __ push(rdx); // set the mdp (method data pointer)
594 } else {
595 __ push(0);
596 }
598 __ movptr(rdx, Address(rbx, methodOopDesc::constants_offset()));
599 __ movptr(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes()));
600 __ push(rdx); // set constant pool cache
601 __ push(r14); // set locals pointer
602 if (native_call) {
603 __ push(0); // no bcp
604 } else {
605 __ push(r13); // set bcp
606 }
607 __ push(0); // reserve word for pointer to expression stack bottom
608 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom
609 }
611 // End of helpers
613 // Various method entries
614 //------------------------------------------------------------------------------------------------------------------------
615 //
616 //
618 // Call an accessor method (assuming it is resolved, otherwise drop
619 // into vanilla (slow path) entry
620 address InterpreterGenerator::generate_accessor_entry(void) {
621 // rbx: methodOop
623 // r13: senderSP must preserver for slow path, set SP to it on fast path
625 address entry_point = __ pc();
626 Label xreturn_path;
628 // do fastpath for resolved accessor methods
629 if (UseFastAccessorMethods) {
630 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites
631 // thereof; parameter size = 1
632 // Note: We can only use this code if the getfield has been resolved
633 // and if we don't have a null-pointer exception => check for
634 // these conditions first and use slow path if necessary.
635 Label slow_path;
636 // If we need a safepoint check, generate full interpreter entry.
637 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
638 SafepointSynchronize::_not_synchronized);
640 __ jcc(Assembler::notEqual, slow_path);
641 // rbx: method
642 __ movptr(rax, Address(rsp, wordSize));
644 // check if local 0 != NULL and read field
645 __ testptr(rax, rax);
646 __ jcc(Assembler::zero, slow_path);
648 __ movptr(rdi, Address(rbx, methodOopDesc::constants_offset()));
649 // read first instruction word and extract bytecode @ 1 and index @ 2
650 __ movptr(rdx, Address(rbx, methodOopDesc::const_offset()));
651 __ movl(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
652 // Shift codes right to get the index on the right.
653 // The bytecode fetched looks like <index><0xb4><0x2a>
654 __ shrl(rdx, 2 * BitsPerByte);
655 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size())));
656 __ movptr(rdi, Address(rdi, constantPoolOopDesc::cache_offset_in_bytes()));
658 // rax: local 0
659 // rbx: method
660 // rdx: constant pool cache index
661 // rdi: constant pool cache
663 // check if getfield has been resolved and read constant pool cache entry
664 // check the validity of the cache entry by testing whether _indices field
665 // contains Bytecode::_getfield in b1 byte.
666 assert(in_words(ConstantPoolCacheEntry::size()) == 4,
667 "adjust shift below");
668 __ movl(rcx,
669 Address(rdi,
670 rdx,
671 Address::times_8,
672 constantPoolCacheOopDesc::base_offset() +
673 ConstantPoolCacheEntry::indices_offset()));
674 __ shrl(rcx, 2 * BitsPerByte);
675 __ andl(rcx, 0xFF);
676 __ cmpl(rcx, Bytecodes::_getfield);
677 __ jcc(Assembler::notEqual, slow_path);
679 // Note: constant pool entry is not valid before bytecode is resolved
680 __ movptr(rcx,
681 Address(rdi,
682 rdx,
683 Address::times_8,
684 constantPoolCacheOopDesc::base_offset() +
685 ConstantPoolCacheEntry::f2_offset()));
686 // edx: flags
687 __ movl(rdx,
688 Address(rdi,
689 rdx,
690 Address::times_8,
691 constantPoolCacheOopDesc::base_offset() +
692 ConstantPoolCacheEntry::flags_offset()));
694 Label notObj, notInt, notByte, notShort;
695 const Address field_address(rax, rcx, Address::times_1);
697 // Need to differentiate between igetfield, agetfield, bgetfield etc.
698 // because they are different sizes.
699 // Use the type from the constant pool cache
700 __ shrl(rdx, ConstantPoolCacheEntry::tosBits);
701 // Make sure we don't need to mask edx for tosBits after the above shift
702 ConstantPoolCacheEntry::verify_tosBits();
704 __ cmpl(rdx, atos);
705 __ jcc(Assembler::notEqual, notObj);
706 // atos
707 __ load_heap_oop(rax, field_address);
708 __ jmp(xreturn_path);
710 __ bind(notObj);
711 __ cmpl(rdx, itos);
712 __ jcc(Assembler::notEqual, notInt);
713 // itos
714 __ movl(rax, field_address);
715 __ jmp(xreturn_path);
717 __ bind(notInt);
718 __ cmpl(rdx, btos);
719 __ jcc(Assembler::notEqual, notByte);
720 // btos
721 __ load_signed_byte(rax, field_address);
722 __ jmp(xreturn_path);
724 __ bind(notByte);
725 __ cmpl(rdx, stos);
726 __ jcc(Assembler::notEqual, notShort);
727 // stos
728 __ load_signed_short(rax, field_address);
729 __ jmp(xreturn_path);
731 __ bind(notShort);
732 #ifdef ASSERT
733 Label okay;
734 __ cmpl(rdx, ctos);
735 __ jcc(Assembler::equal, okay);
736 __ stop("what type is this?");
737 __ bind(okay);
738 #endif
739 // ctos
740 __ load_unsigned_short(rax, field_address);
742 __ bind(xreturn_path);
744 // _ireturn/_areturn
745 __ pop(rdi);
746 __ mov(rsp, r13);
747 __ jmp(rdi);
748 __ ret(0);
750 // generate a vanilla interpreter entry as the slow path
751 __ bind(slow_path);
752 (void) generate_normal_entry(false);
753 } else {
754 (void) generate_normal_entry(false);
755 }
757 return entry_point;
758 }
760 // Method entry for java.lang.ref.Reference.get.
761 address InterpreterGenerator::generate_Reference_get_entry(void) {
762 #ifndef SERIALGC
763 // Code: _aload_0, _getfield, _areturn
764 // parameter size = 1
765 //
766 // The code that gets generated by this routine is split into 2 parts:
767 // 1. The "intrinsified" code for G1 (or any SATB based GC),
768 // 2. The slow path - which is an expansion of the regular method entry.
769 //
770 // Notes:-
771 // * In the G1 code we do not check whether we need to block for
772 // a safepoint. If G1 is enabled then we must execute the specialized
773 // code for Reference.get (except when the Reference object is null)
774 // so that we can log the value in the referent field with an SATB
775 // update buffer.
776 // If the code for the getfield template is modified so that the
777 // G1 pre-barrier code is executed when the current method is
778 // Reference.get() then going through the normal method entry
779 // will be fine.
780 // * The G1 code can, however, check the receiver object (the instance
781 // of java.lang.Reference) and jump to the slow path if null. If the
782 // Reference object is null then we obviously cannot fetch the referent
783 // and so we don't need to call the G1 pre-barrier. Thus we can use the
784 // regular method entry code to generate the NPE.
785 //
786 // This code is based on generate_accessor_enty.
787 //
788 // rbx: methodOop
790 // r13: senderSP must preserve for slow path, set SP to it on fast path
792 address entry = __ pc();
794 const int referent_offset = java_lang_ref_Reference::referent_offset;
795 guarantee(referent_offset > 0, "referent offset not initialized");
797 if (UseG1GC) {
798 Label slow_path;
799 // rbx: method
801 // Check if local 0 != NULL
802 // If the receiver is null then it is OK to jump to the slow path.
803 __ movptr(rax, Address(rsp, wordSize));
805 __ testptr(rax, rax);
806 __ jcc(Assembler::zero, slow_path);
808 // rax: local 0
809 // rbx: method (but can be used as scratch now)
810 // rdx: scratch
811 // rdi: scratch
813 // Generate the G1 pre-barrier code to log the value of
814 // the referent field in an SATB buffer.
816 // Load the value of the referent field.
817 const Address field_address(rax, referent_offset);
818 __ load_heap_oop(rax, field_address);
820 // Generate the G1 pre-barrier code to log the value of
821 // the referent field in an SATB buffer.
822 __ g1_write_barrier_pre(noreg /* obj */,
823 rax /* pre_val */,
824 r15_thread /* thread */,
825 rbx /* tmp */,
826 true /* tosca_live */,
827 true /* expand_call */);
829 // _areturn
830 __ pop(rdi); // get return address
831 __ mov(rsp, r13); // set sp to sender sp
832 __ jmp(rdi);
833 __ ret(0);
835 // generate a vanilla interpreter entry as the slow path
836 __ bind(slow_path);
837 (void) generate_normal_entry(false);
839 return entry;
840 }
841 #endif // SERIALGC
843 // If G1 is not enabled then attempt to go through the accessor entry point
844 // Reference.get is an accessor
845 return generate_accessor_entry();
846 }
849 // Interpreter stub for calling a native method. (asm interpreter)
850 // This sets up a somewhat different looking stack for calling the
851 // native method than the typical interpreter frame setup.
852 address InterpreterGenerator::generate_native_entry(bool synchronized) {
853 // determine code generation flags
854 bool inc_counter = UseCompiler || CountCompiledCalls;
856 // rbx: methodOop
857 // r13: sender sp
859 address entry_point = __ pc();
861 const Address size_of_parameters(rbx, methodOopDesc::
862 size_of_parameters_offset());
863 const Address invocation_counter(rbx, methodOopDesc::
864 invocation_counter_offset() +
865 InvocationCounter::counter_offset());
866 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
868 // get parameter size (always needed)
869 __ load_unsigned_short(rcx, size_of_parameters);
871 // native calls don't need the stack size check since they have no
872 // expression stack and the arguments are already on the stack and
873 // we only add a handful of words to the stack
875 // rbx: methodOop
876 // rcx: size of parameters
877 // r13: sender sp
878 __ pop(rax); // get return address
880 // for natives the size of locals is zero
882 // compute beginning of parameters (r14)
883 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
885 // add 2 zero-initialized slots for native calls
886 // initialize result_handler slot
887 __ push((int) NULL_WORD);
888 // slot for oop temp
889 // (static native method holder mirror/jni oop result)
890 __ push((int) NULL_WORD);
892 if (inc_counter) {
893 __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
894 }
896 // initialize fixed part of activation frame
897 generate_fixed_frame(true);
899 // make sure method is native & not abstract
900 #ifdef ASSERT
901 __ movl(rax, access_flags);
902 {
903 Label L;
904 __ testl(rax, JVM_ACC_NATIVE);
905 __ jcc(Assembler::notZero, L);
906 __ stop("tried to execute non-native method as native");
907 __ bind(L);
908 }
909 {
910 Label L;
911 __ testl(rax, JVM_ACC_ABSTRACT);
912 __ jcc(Assembler::zero, L);
913 __ stop("tried to execute abstract method in interpreter");
914 __ bind(L);
915 }
916 #endif
918 // Since at this point in the method invocation the exception handler
919 // would try to exit the monitor of synchronized methods which hasn't
920 // been entered yet, we set the thread local variable
921 // _do_not_unlock_if_synchronized to true. The remove_activation will
922 // check this flag.
924 const Address do_not_unlock_if_synchronized(r15_thread,
925 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
926 __ movbool(do_not_unlock_if_synchronized, true);
928 // increment invocation count & check for overflow
929 Label invocation_counter_overflow;
930 if (inc_counter) {
931 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
932 }
934 Label continue_after_compile;
935 __ bind(continue_after_compile);
937 bang_stack_shadow_pages(true);
939 // reset the _do_not_unlock_if_synchronized flag
940 __ movbool(do_not_unlock_if_synchronized, false);
942 // check for synchronized methods
943 // Must happen AFTER invocation_counter check and stack overflow check,
944 // so method is not locked if overflows.
945 if (synchronized) {
946 lock_method();
947 } else {
948 // no synchronization necessary
949 #ifdef ASSERT
950 {
951 Label L;
952 __ movl(rax, access_flags);
953 __ testl(rax, JVM_ACC_SYNCHRONIZED);
954 __ jcc(Assembler::zero, L);
955 __ stop("method needs synchronization");
956 __ bind(L);
957 }
958 #endif
959 }
961 // start execution
962 #ifdef ASSERT
963 {
964 Label L;
965 const Address monitor_block_top(rbp,
966 frame::interpreter_frame_monitor_block_top_offset * wordSize);
967 __ movptr(rax, monitor_block_top);
968 __ cmpptr(rax, rsp);
969 __ jcc(Assembler::equal, L);
970 __ stop("broken stack frame setup in interpreter");
971 __ bind(L);
972 }
973 #endif
975 // jvmti support
976 __ notify_method_entry();
978 // work registers
979 const Register method = rbx;
980 const Register t = r11;
982 // allocate space for parameters
983 __ get_method(method);
984 __ verify_oop(method);
985 __ load_unsigned_short(t,
986 Address(method,
987 methodOopDesc::size_of_parameters_offset()));
988 __ shll(t, Interpreter::logStackElementSize);
990 __ subptr(rsp, t);
991 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
992 __ andptr(rsp, -16); // must be 16 byte boundary (see amd64 ABI)
994 // get signature handler
995 {
996 Label L;
997 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
998 __ testptr(t, t);
999 __ jcc(Assembler::notZero, L);
1000 __ call_VM(noreg,
1001 CAST_FROM_FN_PTR(address,
1002 InterpreterRuntime::prepare_native_call),
1003 method);
1004 __ get_method(method);
1005 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
1006 __ bind(L);
1007 }
1009 // call signature handler
1010 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == r14,
1011 "adjust this code");
1012 assert(InterpreterRuntime::SignatureHandlerGenerator::to() == rsp,
1013 "adjust this code");
1014 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == rscratch1,
1015 "adjust this code");
1017 // The generated handlers do not touch RBX (the method oop).
1018 // However, large signatures cannot be cached and are generated
1019 // each time here. The slow-path generator can do a GC on return,
1020 // so we must reload it after the call.
1021 __ call(t);
1022 __ get_method(method); // slow path can do a GC, reload RBX
1025 // result handler is in rax
1026 // set result handler
1027 __ movptr(Address(rbp,
1028 (frame::interpreter_frame_result_handler_offset) * wordSize),
1029 rax);
1031 // pass mirror handle if static call
1032 {
1033 Label L;
1034 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
1035 Klass::java_mirror_offset_in_bytes();
1036 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1037 __ testl(t, JVM_ACC_STATIC);
1038 __ jcc(Assembler::zero, L);
1039 // get mirror
1040 __ movptr(t, Address(method, methodOopDesc::constants_offset()));
1041 __ movptr(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes()));
1042 __ movptr(t, Address(t, mirror_offset));
1043 // copy mirror into activation frame
1044 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize),
1045 t);
1046 // pass handle to mirror
1047 __ lea(c_rarg1,
1048 Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize));
1049 __ bind(L);
1050 }
1052 // get native function entry point
1053 {
1054 Label L;
1055 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
1056 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry());
1057 __ movptr(rscratch2, unsatisfied.addr());
1058 __ cmpptr(rax, rscratch2);
1059 __ jcc(Assembler::notEqual, L);
1060 __ call_VM(noreg,
1061 CAST_FROM_FN_PTR(address,
1062 InterpreterRuntime::prepare_native_call),
1063 method);
1064 __ get_method(method);
1065 __ verify_oop(method);
1066 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
1067 __ bind(L);
1068 }
1070 // pass JNIEnv
1071 __ lea(c_rarg0, Address(r15_thread, JavaThread::jni_environment_offset()));
1073 // It is enough that the pc() points into the right code
1074 // segment. It does not have to be the correct return pc.
1075 __ set_last_Java_frame(rsp, rbp, (address) __ pc());
1077 // change thread state
1078 #ifdef ASSERT
1079 {
1080 Label L;
1081 __ movl(t, Address(r15_thread, JavaThread::thread_state_offset()));
1082 __ cmpl(t, _thread_in_Java);
1083 __ jcc(Assembler::equal, L);
1084 __ stop("Wrong thread state in native stub");
1085 __ bind(L);
1086 }
1087 #endif
1089 // Change state to native
1091 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1092 _thread_in_native);
1094 // Call the native method.
1095 __ call(rax);
1096 // result potentially in rax or xmm0
1098 // Depending on runtime options, either restore the MXCSR
1099 // register after returning from the JNI Call or verify that
1100 // it wasn't changed during -Xcheck:jni.
1101 if (RestoreMXCSROnJNICalls) {
1102 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
1103 }
1104 else if (CheckJNICalls) {
1105 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::x86::verify_mxcsr_entry())));
1106 }
1108 // NOTE: The order of these pushes is known to frame::interpreter_frame_result
1109 // in order to extract the result of a method call. If the order of these
1110 // pushes change or anything else is added to the stack then the code in
1111 // interpreter_frame_result must also change.
1113 __ push(dtos);
1114 __ push(ltos);
1116 // change thread state
1117 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1118 _thread_in_native_trans);
1120 if (os::is_MP()) {
1121 if (UseMembar) {
1122 // Force this write out before the read below
1123 __ membar(Assembler::Membar_mask_bits(
1124 Assembler::LoadLoad | Assembler::LoadStore |
1125 Assembler::StoreLoad | Assembler::StoreStore));
1126 } else {
1127 // Write serialization page so VM thread can do a pseudo remote membar.
1128 // We use the current thread pointer to calculate a thread specific
1129 // offset to write to within the page. This minimizes bus traffic
1130 // due to cache line collision.
1131 __ serialize_memory(r15_thread, rscratch2);
1132 }
1133 }
1135 // check for safepoint operation in progress and/or pending suspend requests
1136 {
1137 Label Continue;
1138 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
1139 SafepointSynchronize::_not_synchronized);
1141 Label L;
1142 __ jcc(Assembler::notEqual, L);
1143 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
1144 __ jcc(Assembler::equal, Continue);
1145 __ bind(L);
1147 // Don't use call_VM as it will see a possible pending exception
1148 // and forward it and never return here preventing us from
1149 // clearing _last_native_pc down below. Also can't use
1150 // call_VM_leaf either as it will check to see if r13 & r14 are
1151 // preserved and correspond to the bcp/locals pointers. So we do a
1152 // runtime call by hand.
1153 //
1154 __ mov(c_rarg0, r15_thread);
1155 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1156 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1157 __ andptr(rsp, -16); // align stack as required by ABI
1158 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
1159 __ mov(rsp, r12); // restore sp
1160 __ reinit_heapbase();
1161 __ bind(Continue);
1162 }
1164 // change thread state
1165 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
1167 // reset_last_Java_frame
1168 __ reset_last_Java_frame(true, true);
1170 // reset handle block
1171 __ movptr(t, Address(r15_thread, JavaThread::active_handles_offset()));
1172 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
1174 // If result is an oop unbox and store it in frame where gc will see it
1175 // and result handler will pick it up
1177 {
1178 Label no_oop, store_result;
1179 __ lea(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT)));
1180 __ cmpptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize));
1181 __ jcc(Assembler::notEqual, no_oop);
1182 // retrieve result
1183 __ pop(ltos);
1184 __ testptr(rax, rax);
1185 __ jcc(Assembler::zero, store_result);
1186 __ movptr(rax, Address(rax, 0));
1187 __ bind(store_result);
1188 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize), rax);
1189 // keep stack depth as expected by pushing oop which will eventually be discarde
1190 __ push(ltos);
1191 __ bind(no_oop);
1192 }
1195 {
1196 Label no_reguard;
1197 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()),
1198 JavaThread::stack_guard_yellow_disabled);
1199 __ jcc(Assembler::notEqual, no_reguard);
1201 __ pusha(); // XXX only save smashed registers
1202 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1203 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1204 __ andptr(rsp, -16); // align stack as required by ABI
1205 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1206 __ mov(rsp, r12); // restore sp
1207 __ popa(); // XXX only restore smashed registers
1208 __ reinit_heapbase();
1210 __ bind(no_reguard);
1211 }
1214 // The method register is junk from after the thread_in_native transition
1215 // until here. Also can't call_VM until the bcp has been
1216 // restored. Need bcp for throwing exception below so get it now.
1217 __ get_method(method);
1218 __ verify_oop(method);
1220 // restore r13 to have legal interpreter frame, i.e., bci == 0 <=>
1221 // r13 == code_base()
1222 __ movptr(r13, Address(method, methodOopDesc::const_offset())); // get constMethodOop
1223 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
1224 // handle exceptions (exception handling will handle unlocking!)
1225 {
1226 Label L;
1227 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
1228 __ jcc(Assembler::zero, L);
1229 // Note: At some point we may want to unify this with the code
1230 // used in call_VM_base(); i.e., we should use the
1231 // StubRoutines::forward_exception code. For now this doesn't work
1232 // here because the rsp is not correctly set at this point.
1233 __ MacroAssembler::call_VM(noreg,
1234 CAST_FROM_FN_PTR(address,
1235 InterpreterRuntime::throw_pending_exception));
1236 __ should_not_reach_here();
1237 __ bind(L);
1238 }
1240 // do unlocking if necessary
1241 {
1242 Label L;
1243 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1244 __ testl(t, JVM_ACC_SYNCHRONIZED);
1245 __ jcc(Assembler::zero, L);
1246 // the code below should be shared with interpreter macro
1247 // assembler implementation
1248 {
1249 Label unlock;
1250 // BasicObjectLock will be first in list, since this is a
1251 // synchronized method. However, need to check that the object
1252 // has not been unlocked by an explicit monitorexit bytecode.
1253 const Address monitor(rbp,
1254 (intptr_t)(frame::interpreter_frame_initial_sp_offset *
1255 wordSize - sizeof(BasicObjectLock)));
1257 // monitor expect in c_rarg1 for slow unlock path
1258 __ lea(c_rarg1, monitor); // address of first monitor
1260 __ movptr(t, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
1261 __ testptr(t, t);
1262 __ jcc(Assembler::notZero, unlock);
1264 // Entry already unlocked, need to throw exception
1265 __ MacroAssembler::call_VM(noreg,
1266 CAST_FROM_FN_PTR(address,
1267 InterpreterRuntime::throw_illegal_monitor_state_exception));
1268 __ should_not_reach_here();
1270 __ bind(unlock);
1271 __ unlock_object(c_rarg1);
1272 }
1273 __ bind(L);
1274 }
1276 // jvmti support
1277 // Note: This must happen _after_ handling/throwing any exceptions since
1278 // the exception handler code notifies the runtime of method exits
1279 // too. If this happens before, method entry/exit notifications are
1280 // not properly paired (was bug - gri 11/22/99).
1281 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI);
1283 // restore potential result in edx:eax, call result handler to
1284 // restore potential result in ST0 & handle result
1286 __ pop(ltos);
1287 __ pop(dtos);
1289 __ movptr(t, Address(rbp,
1290 (frame::interpreter_frame_result_handler_offset) * wordSize));
1291 __ call(t);
1293 // remove activation
1294 __ movptr(t, Address(rbp,
1295 frame::interpreter_frame_sender_sp_offset *
1296 wordSize)); // get sender sp
1297 __ leave(); // remove frame anchor
1298 __ pop(rdi); // get return address
1299 __ mov(rsp, t); // set sp to sender sp
1300 __ jmp(rdi);
1302 if (inc_counter) {
1303 // Handle overflow of counter and compile method
1304 __ bind(invocation_counter_overflow);
1305 generate_counter_overflow(&continue_after_compile);
1306 }
1308 return entry_point;
1309 }
1311 //
1312 // Generic interpreted method entry to (asm) interpreter
1313 //
1314 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1315 // determine code generation flags
1316 bool inc_counter = UseCompiler || CountCompiledCalls;
1318 // ebx: methodOop
1319 // r13: sender sp
1320 address entry_point = __ pc();
1322 const Address size_of_parameters(rbx,
1323 methodOopDesc::size_of_parameters_offset());
1324 const Address size_of_locals(rbx, methodOopDesc::size_of_locals_offset());
1325 const Address invocation_counter(rbx,
1326 methodOopDesc::invocation_counter_offset() +
1327 InvocationCounter::counter_offset());
1328 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
1330 // get parameter size (always needed)
1331 __ load_unsigned_short(rcx, size_of_parameters);
1333 // rbx: methodOop
1334 // rcx: size of parameters
1335 // r13: sender_sp (could differ from sp+wordSize if we were called via c2i )
1337 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words
1338 __ subl(rdx, rcx); // rdx = no. of additional locals
1340 // YYY
1341 // __ incrementl(rdx);
1342 // __ andl(rdx, -2);
1344 // see if we've got enough room on the stack for locals plus overhead.
1345 generate_stack_overflow_check();
1347 // get return address
1348 __ pop(rax);
1350 // compute beginning of parameters (r14)
1351 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
1353 // rdx - # of additional locals
1354 // allocate space for locals
1355 // explicitly initialize locals
1356 {
1357 Label exit, loop;
1358 __ testl(rdx, rdx);
1359 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0
1360 __ bind(loop);
1361 __ push((int) NULL_WORD); // initialize local variables
1362 __ decrementl(rdx); // until everything initialized
1363 __ jcc(Assembler::greater, loop);
1364 __ bind(exit);
1365 }
1367 // (pre-)fetch invocation count
1368 if (inc_counter) {
1369 __ movl(rcx, invocation_counter);
1370 }
1371 // initialize fixed part of activation frame
1372 generate_fixed_frame(false);
1374 // make sure method is not native & not abstract
1375 #ifdef ASSERT
1376 __ movl(rax, access_flags);
1377 {
1378 Label L;
1379 __ testl(rax, JVM_ACC_NATIVE);
1380 __ jcc(Assembler::zero, L);
1381 __ stop("tried to execute native method as non-native");
1382 __ bind(L);
1383 }
1384 {
1385 Label L;
1386 __ testl(rax, JVM_ACC_ABSTRACT);
1387 __ jcc(Assembler::zero, L);
1388 __ stop("tried to execute abstract method in interpreter");
1389 __ bind(L);
1390 }
1391 #endif
1393 // Since at this point in the method invocation the exception
1394 // handler would try to exit the monitor of synchronized methods
1395 // which hasn't been entered yet, we set the thread local variable
1396 // _do_not_unlock_if_synchronized to true. The remove_activation
1397 // will check this flag.
1399 const Address do_not_unlock_if_synchronized(r15_thread,
1400 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1401 __ movbool(do_not_unlock_if_synchronized, true);
1403 // increment invocation count & check for overflow
1404 Label invocation_counter_overflow;
1405 Label profile_method;
1406 Label profile_method_continue;
1407 if (inc_counter) {
1408 generate_counter_incr(&invocation_counter_overflow,
1409 &profile_method,
1410 &profile_method_continue);
1411 if (ProfileInterpreter) {
1412 __ bind(profile_method_continue);
1413 }
1414 }
1416 Label continue_after_compile;
1417 __ bind(continue_after_compile);
1419 // check for synchronized interpreted methods
1420 bang_stack_shadow_pages(false);
1422 // reset the _do_not_unlock_if_synchronized flag
1423 __ movbool(do_not_unlock_if_synchronized, false);
1425 // check for synchronized methods
1426 // Must happen AFTER invocation_counter check and stack overflow check,
1427 // so method is not locked if overflows.
1428 if (synchronized) {
1429 // Allocate monitor and lock method
1430 lock_method();
1431 } else {
1432 // no synchronization necessary
1433 #ifdef ASSERT
1434 {
1435 Label L;
1436 __ movl(rax, access_flags);
1437 __ testl(rax, JVM_ACC_SYNCHRONIZED);
1438 __ jcc(Assembler::zero, L);
1439 __ stop("method needs synchronization");
1440 __ bind(L);
1441 }
1442 #endif
1443 }
1445 // start execution
1446 #ifdef ASSERT
1447 {
1448 Label L;
1449 const Address monitor_block_top (rbp,
1450 frame::interpreter_frame_monitor_block_top_offset * wordSize);
1451 __ movptr(rax, monitor_block_top);
1452 __ cmpptr(rax, rsp);
1453 __ jcc(Assembler::equal, L);
1454 __ stop("broken stack frame setup in interpreter");
1455 __ bind(L);
1456 }
1457 #endif
1459 // jvmti support
1460 __ notify_method_entry();
1462 __ dispatch_next(vtos);
1464 // invocation counter overflow
1465 if (inc_counter) {
1466 if (ProfileInterpreter) {
1467 // We have decided to profile this method in the interpreter
1468 __ bind(profile_method);
1469 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method));
1470 __ set_method_data_pointer_for_bcp();
1471 __ get_method(rbx);
1472 __ jmp(profile_method_continue);
1473 }
1474 // Handle overflow of counter and compile method
1475 __ bind(invocation_counter_overflow);
1476 generate_counter_overflow(&continue_after_compile);
1477 }
1479 return entry_point;
1480 }
1482 // Entry points
1483 //
1484 // Here we generate the various kind of entries into the interpreter.
1485 // The two main entry type are generic bytecode methods and native
1486 // call method. These both come in synchronized and non-synchronized
1487 // versions but the frame layout they create is very similar. The
1488 // other method entry types are really just special purpose entries
1489 // that are really entry and interpretation all in one. These are for
1490 // trivial methods like accessor, empty, or special math methods.
1491 //
1492 // When control flow reaches any of the entry types for the interpreter
1493 // the following holds ->
1494 //
1495 // Arguments:
1496 //
1497 // rbx: methodOop
1498 //
1499 // Stack layout immediately at entry
1500 //
1501 // [ return address ] <--- rsp
1502 // [ parameter n ]
1503 // ...
1504 // [ parameter 1 ]
1505 // [ expression stack ] (caller's java expression stack)
1507 // Assuming that we don't go to one of the trivial specialized entries
1508 // the stack will look like below when we are ready to execute the
1509 // first bytecode (or call the native routine). The register usage
1510 // will be as the template based interpreter expects (see
1511 // interpreter_amd64.hpp).
1512 //
1513 // local variables follow incoming parameters immediately; i.e.
1514 // the return address is moved to the end of the locals).
1515 //
1516 // [ monitor entry ] <--- rsp
1517 // ...
1518 // [ monitor entry ]
1519 // [ expr. stack bottom ]
1520 // [ saved r13 ]
1521 // [ current r14 ]
1522 // [ methodOop ]
1523 // [ saved ebp ] <--- rbp
1524 // [ return address ]
1525 // [ local variable m ]
1526 // ...
1527 // [ local variable 1 ]
1528 // [ parameter n ]
1529 // ...
1530 // [ parameter 1 ] <--- r14
1532 address AbstractInterpreterGenerator::generate_method_entry(
1533 AbstractInterpreter::MethodKind kind) {
1534 // determine code generation flags
1535 bool synchronized = false;
1536 address entry_point = NULL;
1538 switch (kind) {
1539 case Interpreter::zerolocals : break;
1540 case Interpreter::zerolocals_synchronized: synchronized = true; break;
1541 case Interpreter::native : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(false); break;
1542 case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(true); break;
1543 case Interpreter::empty : entry_point = ((InterpreterGenerator*) this)->generate_empty_entry(); break;
1544 case Interpreter::accessor : entry_point = ((InterpreterGenerator*) this)->generate_accessor_entry(); break;
1545 case Interpreter::abstract : entry_point = ((InterpreterGenerator*) this)->generate_abstract_entry(); break;
1546 case Interpreter::method_handle : entry_point = ((InterpreterGenerator*) this)->generate_method_handle_entry();break;
1548 case Interpreter::java_lang_math_sin : // fall thru
1549 case Interpreter::java_lang_math_cos : // fall thru
1550 case Interpreter::java_lang_math_tan : // fall thru
1551 case Interpreter::java_lang_math_abs : // fall thru
1552 case Interpreter::java_lang_math_log : // fall thru
1553 case Interpreter::java_lang_math_log10 : // fall thru
1554 case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*) this)->generate_math_entry(kind); break;
1555 case Interpreter::java_lang_ref_reference_get
1556 : entry_point = ((InterpreterGenerator*)this)->generate_Reference_get_entry(); break;
1557 default : ShouldNotReachHere(); break;
1558 }
1560 if (entry_point) {
1561 return entry_point;
1562 }
1564 return ((InterpreterGenerator*) this)->
1565 generate_normal_entry(synchronized);
1566 }
1568 // These should never be compiled since the interpreter will prefer
1569 // the compiled version to the intrinsic version.
1570 bool AbstractInterpreter::can_be_compiled(methodHandle m) {
1571 switch (method_kind(m)) {
1572 case Interpreter::java_lang_math_sin : // fall thru
1573 case Interpreter::java_lang_math_cos : // fall thru
1574 case Interpreter::java_lang_math_tan : // fall thru
1575 case Interpreter::java_lang_math_abs : // fall thru
1576 case Interpreter::java_lang_math_log : // fall thru
1577 case Interpreter::java_lang_math_log10 : // fall thru
1578 case Interpreter::java_lang_math_sqrt :
1579 return false;
1580 default:
1581 return true;
1582 }
1583 }
1585 // How much stack a method activation needs in words.
1586 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1587 const int entry_size = frame::interpreter_frame_monitor_size();
1589 // total overhead size: entry_size + (saved rbp thru expr stack
1590 // bottom). be sure to change this if you add/subtract anything
1591 // to/from the overhead area
1592 const int overhead_size =
1593 -(frame::interpreter_frame_initial_sp_offset) + entry_size;
1595 const int stub_code = frame::entry_frame_after_call_words;
1596 const int extra_stack = methodOopDesc::extra_stack_entries();
1597 const int method_stack = (method->max_locals() + method->max_stack() + extra_stack) *
1598 Interpreter::stackElementWords;
1599 return (overhead_size + method_stack + stub_code);
1600 }
1602 int AbstractInterpreter::layout_activation(methodOop method,
1603 int tempcount,
1604 int popframe_extra_args,
1605 int moncount,
1606 int callee_param_count,
1607 int callee_locals,
1608 frame* caller,
1609 frame* interpreter_frame,
1610 bool is_top_frame) {
1611 // Note: This calculation must exactly parallel the frame setup
1612 // in AbstractInterpreterGenerator::generate_method_entry.
1613 // If interpreter_frame!=NULL, set up the method, locals, and monitors.
1614 // The frame interpreter_frame, if not NULL, is guaranteed to be the
1615 // right size, as determined by a previous call to this method.
1616 // It is also guaranteed to be walkable even though it is in a skeletal state
1618 // fixed size of an interpreter frame:
1619 int max_locals = method->max_locals() * Interpreter::stackElementWords;
1620 int extra_locals = (method->max_locals() - method->size_of_parameters()) *
1621 Interpreter::stackElementWords;
1623 int overhead = frame::sender_sp_offset -
1624 frame::interpreter_frame_initial_sp_offset;
1625 // Our locals were accounted for by the caller (or last_frame_adjust
1626 // on the transistion) Since the callee parameters already account
1627 // for the callee's params we only need to account for the extra
1628 // locals.
1629 int size = overhead +
1630 (callee_locals - callee_param_count)*Interpreter::stackElementWords +
1631 moncount * frame::interpreter_frame_monitor_size() +
1632 tempcount* Interpreter::stackElementWords + popframe_extra_args;
1633 if (interpreter_frame != NULL) {
1634 #ifdef ASSERT
1635 if (!EnableInvokeDynamic)
1636 // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences?
1637 // Probably, since deoptimization doesn't work yet.
1638 assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1639 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)");
1640 #endif
1642 interpreter_frame->interpreter_frame_set_method(method);
1643 // NOTE the difference in using sender_sp and
1644 // interpreter_frame_sender_sp interpreter_frame_sender_sp is
1645 // the original sp of the caller (the unextended_sp) and
1646 // sender_sp is fp+16 XXX
1647 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1;
1649 interpreter_frame->interpreter_frame_set_locals(locals);
1650 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin();
1651 BasicObjectLock* monbot = montop - moncount;
1652 interpreter_frame->interpreter_frame_set_monitor_end(monbot);
1654 // Set last_sp
1655 intptr_t* esp = (intptr_t*) monbot -
1656 tempcount*Interpreter::stackElementWords -
1657 popframe_extra_args;
1658 interpreter_frame->interpreter_frame_set_last_sp(esp);
1660 // All frames but the initial (oldest) interpreter frame we fill in have
1661 // a value for sender_sp that allows walking the stack but isn't
1662 // truly correct. Correct the value here.
1663 if (extra_locals != 0 &&
1664 interpreter_frame->sender_sp() ==
1665 interpreter_frame->interpreter_frame_sender_sp()) {
1666 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() +
1667 extra_locals);
1668 }
1669 *interpreter_frame->interpreter_frame_cache_addr() =
1670 method->constants()->cache();
1671 }
1672 return size;
1673 }
1675 //-----------------------------------------------------------------------------
1676 // Exceptions
1678 void TemplateInterpreterGenerator::generate_throw_exception() {
1679 // Entry point in previous activation (i.e., if the caller was
1680 // interpreted)
1681 Interpreter::_rethrow_exception_entry = __ pc();
1682 // Restore sp to interpreter_frame_last_sp even though we are going
1683 // to empty the expression stack for the exception processing.
1684 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1685 // rax: exception
1686 // rdx: return address/pc that threw exception
1687 __ restore_bcp(); // r13 points to call/send
1688 __ restore_locals();
1689 __ reinit_heapbase(); // restore r12 as heapbase.
1690 // Entry point for exceptions thrown within interpreter code
1691 Interpreter::_throw_exception_entry = __ pc();
1692 // expression stack is undefined here
1693 // rax: exception
1694 // r13: exception bcp
1695 __ verify_oop(rax);
1696 __ mov(c_rarg1, rax);
1698 // expression stack must be empty before entering the VM in case of
1699 // an exception
1700 __ empty_expression_stack();
1701 // find exception handler address and preserve exception oop
1702 __ call_VM(rdx,
1703 CAST_FROM_FN_PTR(address,
1704 InterpreterRuntime::exception_handler_for_exception),
1705 c_rarg1);
1706 // rax: exception handler entry point
1707 // rdx: preserved exception oop
1708 // r13: bcp for exception handler
1709 __ push_ptr(rdx); // push exception which is now the only value on the stack
1710 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!)
1712 // If the exception is not handled in the current frame the frame is
1713 // removed and the exception is rethrown (i.e. exception
1714 // continuation is _rethrow_exception).
1715 //
1716 // Note: At this point the bci is still the bxi for the instruction
1717 // which caused the exception and the expression stack is
1718 // empty. Thus, for any VM calls at this point, GC will find a legal
1719 // oop map (with empty expression stack).
1721 // In current activation
1722 // tos: exception
1723 // esi: exception bcp
1725 //
1726 // JVMTI PopFrame support
1727 //
1729 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1730 __ empty_expression_stack();
1731 // Set the popframe_processing bit in pending_popframe_condition
1732 // indicating that we are currently handling popframe, so that
1733 // call_VMs that may happen later do not trigger new popframe
1734 // handling cycles.
1735 __ movl(rdx, Address(r15_thread, JavaThread::popframe_condition_offset()));
1736 __ orl(rdx, JavaThread::popframe_processing_bit);
1737 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), rdx);
1739 {
1740 // Check to see whether we are returning to a deoptimized frame.
1741 // (The PopFrame call ensures that the caller of the popped frame is
1742 // either interpreted or compiled and deoptimizes it if compiled.)
1743 // In this case, we can't call dispatch_next() after the frame is
1744 // popped, but instead must save the incoming arguments and restore
1745 // them after deoptimization has occurred.
1746 //
1747 // Note that we don't compare the return PC against the
1748 // deoptimization blob's unpack entry because of the presence of
1749 // adapter frames in C2.
1750 Label caller_not_deoptimized;
1751 __ movptr(c_rarg1, Address(rbp, frame::return_addr_offset * wordSize));
1752 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1753 InterpreterRuntime::interpreter_contains), c_rarg1);
1754 __ testl(rax, rax);
1755 __ jcc(Assembler::notZero, caller_not_deoptimized);
1757 // Compute size of arguments for saving when returning to
1758 // deoptimized caller
1759 __ get_method(rax);
1760 __ load_unsigned_short(rax, Address(rax, in_bytes(methodOopDesc::
1761 size_of_parameters_offset())));
1762 __ shll(rax, Interpreter::logStackElementSize);
1763 __ restore_locals(); // XXX do we need this?
1764 __ subptr(r14, rax);
1765 __ addptr(r14, wordSize);
1766 // Save these arguments
1767 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1768 Deoptimization::
1769 popframe_preserve_args),
1770 r15_thread, rax, r14);
1772 __ remove_activation(vtos, rdx,
1773 /* throw_monitor_exception */ false,
1774 /* install_monitor_exception */ false,
1775 /* notify_jvmdi */ false);
1777 // Inform deoptimization that it is responsible for restoring
1778 // these arguments
1779 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1780 JavaThread::popframe_force_deopt_reexecution_bit);
1782 // Continue in deoptimization handler
1783 __ jmp(rdx);
1785 __ bind(caller_not_deoptimized);
1786 }
1788 __ remove_activation(vtos, rdx, /* rdx result (retaddr) is not used */
1789 /* throw_monitor_exception */ false,
1790 /* install_monitor_exception */ false,
1791 /* notify_jvmdi */ false);
1793 // Finish with popframe handling
1794 // A previous I2C followed by a deoptimization might have moved the
1795 // outgoing arguments further up the stack. PopFrame expects the
1796 // mutations to those outgoing arguments to be preserved and other
1797 // constraints basically require this frame to look exactly as
1798 // though it had previously invoked an interpreted activation with
1799 // no space between the top of the expression stack (current
1800 // last_sp) and the top of stack. Rather than force deopt to
1801 // maintain this kind of invariant all the time we call a small
1802 // fixup routine to move the mutated arguments onto the top of our
1803 // expression stack if necessary.
1804 __ mov(c_rarg1, rsp);
1805 __ movptr(c_rarg2, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1806 // PC must point into interpreter here
1807 __ set_last_Java_frame(noreg, rbp, __ pc());
1808 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), r15_thread, c_rarg1, c_rarg2);
1809 __ reset_last_Java_frame(true, true);
1810 // Restore the last_sp and null it out
1811 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1812 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1814 __ restore_bcp(); // XXX do we need this?
1815 __ restore_locals(); // XXX do we need this?
1816 // The method data pointer was incremented already during
1817 // call profiling. We have to restore the mdp for the current bcp.
1818 if (ProfileInterpreter) {
1819 __ set_method_data_pointer_for_bcp();
1820 }
1822 // Clear the popframe condition flag
1823 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1824 JavaThread::popframe_inactive);
1826 __ dispatch_next(vtos);
1827 // end of PopFrame support
1829 Interpreter::_remove_activation_entry = __ pc();
1831 // preserve exception over this code sequence
1832 __ pop_ptr(rax);
1833 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), rax);
1834 // remove the activation (without doing throws on illegalMonitorExceptions)
1835 __ remove_activation(vtos, rdx, false, true, false);
1836 // restore exception
1837 __ movptr(rax, Address(r15_thread, JavaThread::vm_result_offset()));
1838 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int32_t)NULL_WORD);
1839 __ verify_oop(rax);
1841 // In between activations - previous activation type unknown yet
1842 // compute continuation point - the continuation point expects the
1843 // following registers set up:
1844 //
1845 // rax: exception
1846 // rdx: return address/pc that threw exception
1847 // rsp: expression stack of caller
1848 // rbp: ebp of caller
1849 __ push(rax); // save exception
1850 __ push(rdx); // save return address
1851 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1852 SharedRuntime::exception_handler_for_return_address),
1853 r15_thread, rdx);
1854 __ mov(rbx, rax); // save exception handler
1855 __ pop(rdx); // restore return address
1856 __ pop(rax); // restore exception
1857 // Note that an "issuing PC" is actually the next PC after the call
1858 __ jmp(rbx); // jump to exception
1859 // handler of caller
1860 }
1863 //
1864 // JVMTI ForceEarlyReturn support
1865 //
1866 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1867 address entry = __ pc();
1869 __ restore_bcp();
1870 __ restore_locals();
1871 __ empty_expression_stack();
1872 __ load_earlyret_value(state);
1874 __ movptr(rdx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
1875 Address cond_addr(rdx, JvmtiThreadState::earlyret_state_offset());
1877 // Clear the earlyret state
1878 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive);
1880 __ remove_activation(state, rsi,
1881 false, /* throw_monitor_exception */
1882 false, /* install_monitor_exception */
1883 true); /* notify_jvmdi */
1884 __ jmp(rsi);
1886 return entry;
1887 } // end of ForceEarlyReturn support
1890 //-----------------------------------------------------------------------------
1891 // Helper for vtos entry point generation
1893 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t,
1894 address& bep,
1895 address& cep,
1896 address& sep,
1897 address& aep,
1898 address& iep,
1899 address& lep,
1900 address& fep,
1901 address& dep,
1902 address& vep) {
1903 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1904 Label L;
1905 aep = __ pc(); __ push_ptr(); __ jmp(L);
1906 fep = __ pc(); __ push_f(); __ jmp(L);
1907 dep = __ pc(); __ push_d(); __ jmp(L);
1908 lep = __ pc(); __ push_l(); __ jmp(L);
1909 bep = cep = sep =
1910 iep = __ pc(); __ push_i();
1911 vep = __ pc();
1912 __ bind(L);
1913 generate_and_dispatch(t);
1914 }
1917 //-----------------------------------------------------------------------------
1918 // Generation of individual instructions
1920 // helpers for generate_and_dispatch
1923 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1924 : TemplateInterpreterGenerator(code) {
1925 generate_all(); // down here so it can be "virtual"
1926 }
1928 //-----------------------------------------------------------------------------
1930 // Non-product code
1931 #ifndef PRODUCT
1932 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1933 address entry = __ pc();
1935 __ push(state);
1936 __ push(c_rarg0);
1937 __ push(c_rarg1);
1938 __ push(c_rarg2);
1939 __ push(c_rarg3);
1940 __ mov(c_rarg2, rax); // Pass itos
1941 #ifdef _WIN64
1942 __ movflt(xmm3, xmm0); // Pass ftos
1943 #endif
1944 __ call_VM(noreg,
1945 CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode),
1946 c_rarg1, c_rarg2, c_rarg3);
1947 __ pop(c_rarg3);
1948 __ pop(c_rarg2);
1949 __ pop(c_rarg1);
1950 __ pop(c_rarg0);
1951 __ pop(state);
1952 __ ret(0); // return from result handler
1954 return entry;
1955 }
1957 void TemplateInterpreterGenerator::count_bytecode() {
1958 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value));
1959 }
1961 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1962 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()]));
1963 }
1965 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1966 __ mov32(rbx, ExternalAddress((address) &BytecodePairHistogram::_index));
1967 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes);
1968 __ orl(rbx,
1969 ((int) t->bytecode()) <<
1970 BytecodePairHistogram::log2_number_of_codes);
1971 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx);
1972 __ lea(rscratch1, ExternalAddress((address) BytecodePairHistogram::_counters));
1973 __ incrementl(Address(rscratch1, rbx, Address::times_4));
1974 }
1977 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1978 // Call a little run-time stub to avoid blow-up for each bytecode.
1979 // The run-time runtime saves the right registers, depending on
1980 // the tosca in-state for the given template.
1982 assert(Interpreter::trace_code(t->tos_in()) != NULL,
1983 "entry must have been generated");
1984 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1985 __ andptr(rsp, -16); // align stack as required by ABI
1986 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in())));
1987 __ mov(rsp, r12); // restore sp
1988 __ reinit_heapbase();
1989 }
1992 void TemplateInterpreterGenerator::stop_interpreter_at() {
1993 Label L;
1994 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value),
1995 StopInterpreterAt);
1996 __ jcc(Assembler::notEqual, L);
1997 __ int3();
1998 __ bind(L);
1999 }
2000 #endif // !PRODUCT
2001 #endif // ! CC_INTERP