Thu, 14 Apr 2011 13:45:41 -0700
Merge
1 /*
2 * Copyright (c) 2003, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "interp_masm_x86_64.hpp"
27 #include "interpreter/interpreter.hpp"
28 #include "interpreter/interpreterRuntime.hpp"
29 #include "oops/arrayOop.hpp"
30 #include "oops/markOop.hpp"
31 #include "oops/methodDataOop.hpp"
32 #include "oops/methodOop.hpp"
33 #include "prims/jvmtiExport.hpp"
34 #include "prims/jvmtiRedefineClassesTrace.hpp"
35 #include "prims/jvmtiThreadState.hpp"
36 #include "runtime/basicLock.hpp"
37 #include "runtime/biasedLocking.hpp"
38 #include "runtime/sharedRuntime.hpp"
39 #ifdef TARGET_OS_FAMILY_linux
40 # include "thread_linux.inline.hpp"
41 #endif
42 #ifdef TARGET_OS_FAMILY_solaris
43 # include "thread_solaris.inline.hpp"
44 #endif
45 #ifdef TARGET_OS_FAMILY_windows
46 # include "thread_windows.inline.hpp"
47 #endif
50 // Implementation of InterpreterMacroAssembler
52 #ifdef CC_INTERP
53 void InterpreterMacroAssembler::get_method(Register reg) {
54 movptr(reg, Address(rbp, -((int)sizeof(BytecodeInterpreter) + 2 * wordSize)));
55 movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method)));
56 }
57 #endif // CC_INTERP
59 #ifndef CC_INTERP
61 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point,
62 int number_of_arguments) {
63 // interpreter specific
64 //
65 // Note: No need to save/restore bcp & locals (r13 & r14) pointer
66 // since these are callee saved registers and no blocking/
67 // GC can happen in leaf calls.
68 // Further Note: DO NOT save/restore bcp/locals. If a caller has
69 // already saved them so that it can use esi/edi as temporaries
70 // then a save/restore here will DESTROY the copy the caller
71 // saved! There used to be a save_bcp() that only happened in
72 // the ASSERT path (no restore_bcp). Which caused bizarre failures
73 // when jvm built with ASSERTs.
74 #ifdef ASSERT
75 {
76 Label L;
77 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
78 jcc(Assembler::equal, L);
79 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
80 " last_sp != NULL");
81 bind(L);
82 }
83 #endif
84 // super call
85 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
86 // interpreter specific
87 // Used to ASSERT that r13/r14 were equal to frame's bcp/locals
88 // but since they may not have been saved (and we don't want to
89 // save thme here (see note above) the assert is invalid.
90 }
92 void InterpreterMacroAssembler::call_VM_base(Register oop_result,
93 Register java_thread,
94 Register last_java_sp,
95 address entry_point,
96 int number_of_arguments,
97 bool check_exceptions) {
98 // interpreter specific
99 //
100 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
101 // really make a difference for these runtime calls, since they are
102 // slow anyway. Btw., bcp must be saved/restored since it may change
103 // due to GC.
104 // assert(java_thread == noreg , "not expecting a precomputed java thread");
105 save_bcp();
106 #ifdef ASSERT
107 {
108 Label L;
109 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
110 jcc(Assembler::equal, L);
111 stop("InterpreterMacroAssembler::call_VM_leaf_base:"
112 " last_sp != NULL");
113 bind(L);
114 }
115 #endif /* ASSERT */
116 // super call
117 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp,
118 entry_point, number_of_arguments,
119 check_exceptions);
120 // interpreter specific
121 restore_bcp();
122 restore_locals();
123 }
126 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
127 if (JvmtiExport::can_pop_frame()) {
128 Label L;
129 // Initiate popframe handling only if it is not already being
130 // processed. If the flag has the popframe_processing bit set, it
131 // means that this code is called *during* popframe handling - we
132 // don't want to reenter.
133 // This method is only called just after the call into the vm in
134 // call_VM_base, so the arg registers are available.
135 movl(c_rarg0, Address(r15_thread, JavaThread::popframe_condition_offset()));
136 testl(c_rarg0, JavaThread::popframe_pending_bit);
137 jcc(Assembler::zero, L);
138 testl(c_rarg0, JavaThread::popframe_processing_bit);
139 jcc(Assembler::notZero, L);
140 // Call Interpreter::remove_activation_preserving_args_entry() to get the
141 // address of the same-named entrypoint in the generated interpreter code.
142 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
143 jmp(rax);
144 bind(L);
145 }
146 }
149 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
150 movptr(rcx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
151 const Address tos_addr(rcx, JvmtiThreadState::earlyret_tos_offset());
152 const Address oop_addr(rcx, JvmtiThreadState::earlyret_oop_offset());
153 const Address val_addr(rcx, JvmtiThreadState::earlyret_value_offset());
154 switch (state) {
155 case atos: movptr(rax, oop_addr);
156 movptr(oop_addr, (int32_t)NULL_WORD);
157 verify_oop(rax, state); break;
158 case ltos: movptr(rax, val_addr); break;
159 case btos: // fall through
160 case ctos: // fall through
161 case stos: // fall through
162 case itos: movl(rax, val_addr); break;
163 case ftos: movflt(xmm0, val_addr); break;
164 case dtos: movdbl(xmm0, val_addr); break;
165 case vtos: /* nothing to do */ break;
166 default : ShouldNotReachHere();
167 }
168 // Clean up tos value in the thread object
169 movl(tos_addr, (int) ilgl);
170 movl(val_addr, (int32_t) NULL_WORD);
171 }
174 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
175 if (JvmtiExport::can_force_early_return()) {
176 Label L;
177 movptr(c_rarg0, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
178 testptr(c_rarg0, c_rarg0);
179 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit;
181 // Initiate earlyret handling only if it is not already being processed.
182 // If the flag has the earlyret_processing bit set, it means that this code
183 // is called *during* earlyret handling - we don't want to reenter.
184 movl(c_rarg0, Address(c_rarg0, JvmtiThreadState::earlyret_state_offset()));
185 cmpl(c_rarg0, JvmtiThreadState::earlyret_pending);
186 jcc(Assembler::notEqual, L);
188 // Call Interpreter::remove_activation_early_entry() to get the address of the
189 // same-named entrypoint in the generated interpreter code.
190 movptr(c_rarg0, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
191 movl(c_rarg0, Address(c_rarg0, JvmtiThreadState::earlyret_tos_offset()));
192 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), c_rarg0);
193 jmp(rax);
194 bind(L);
195 }
196 }
199 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(
200 Register reg,
201 int bcp_offset) {
202 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
203 movl(reg, Address(r13, bcp_offset));
204 bswapl(reg);
205 shrl(reg, 16);
206 }
209 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index,
210 int bcp_offset,
211 size_t index_size) {
212 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
213 if (index_size == sizeof(u2)) {
214 load_unsigned_short(index, Address(r13, bcp_offset));
215 } else if (index_size == sizeof(u4)) {
216 assert(EnableInvokeDynamic, "giant index used only for JSR 292");
217 movl(index, Address(r13, bcp_offset));
218 // Check if the secondary index definition is still ~x, otherwise
219 // we have to change the following assembler code to calculate the
220 // plain index.
221 assert(constantPoolCacheOopDesc::decode_secondary_index(~123) == 123, "else change next line");
222 notl(index); // convert to plain index
223 } else if (index_size == sizeof(u1)) {
224 assert(EnableInvokeDynamic, "tiny index used only for JSR 292");
225 load_unsigned_byte(index, Address(r13, bcp_offset));
226 } else {
227 ShouldNotReachHere();
228 }
229 }
232 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache,
233 Register index,
234 int bcp_offset,
235 size_t index_size) {
236 assert(cache != index, "must use different registers");
237 get_cache_index_at_bcp(index, bcp_offset, index_size);
238 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
239 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
240 // convert from field index to ConstantPoolCacheEntry index
241 shll(index, 2);
242 }
245 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache,
246 Register tmp,
247 int bcp_offset,
248 size_t index_size) {
249 assert(cache != tmp, "must use different register");
250 get_cache_index_at_bcp(tmp, bcp_offset, index_size);
251 assert(sizeof(ConstantPoolCacheEntry) == 4 * wordSize, "adjust code below");
252 // convert from field index to ConstantPoolCacheEntry index
253 // and from word offset to byte offset
254 shll(tmp, 2 + LogBytesPerWord);
255 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
256 // skip past the header
257 addptr(cache, in_bytes(constantPoolCacheOopDesc::base_offset()));
258 addptr(cache, tmp); // construct pointer to cache entry
259 }
262 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a
263 // subtype of super_klass.
264 //
265 // Args:
266 // rax: superklass
267 // Rsub_klass: subklass
268 //
269 // Kills:
270 // rcx, rdi
271 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass,
272 Label& ok_is_subtype) {
273 assert(Rsub_klass != rax, "rax holds superklass");
274 assert(Rsub_klass != r14, "r14 holds locals");
275 assert(Rsub_klass != r13, "r13 holds bcp");
276 assert(Rsub_klass != rcx, "rcx holds 2ndary super array length");
277 assert(Rsub_klass != rdi, "rdi holds 2ndary super array scan ptr");
279 // Profile the not-null value's klass.
280 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi
282 // Do the check.
283 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx
285 // Profile the failure of the check.
286 profile_typecheck_failed(rcx); // blows rcx
287 }
291 // Java Expression Stack
293 void InterpreterMacroAssembler::pop_ptr(Register r) {
294 pop(r);
295 }
297 void InterpreterMacroAssembler::pop_i(Register r) {
298 // XXX can't use pop currently, upper half non clean
299 movl(r, Address(rsp, 0));
300 addptr(rsp, wordSize);
301 }
303 void InterpreterMacroAssembler::pop_l(Register r) {
304 movq(r, Address(rsp, 0));
305 addptr(rsp, 2 * Interpreter::stackElementSize);
306 }
308 void InterpreterMacroAssembler::pop_f(XMMRegister r) {
309 movflt(r, Address(rsp, 0));
310 addptr(rsp, wordSize);
311 }
313 void InterpreterMacroAssembler::pop_d(XMMRegister r) {
314 movdbl(r, Address(rsp, 0));
315 addptr(rsp, 2 * Interpreter::stackElementSize);
316 }
318 void InterpreterMacroAssembler::push_ptr(Register r) {
319 push(r);
320 }
322 void InterpreterMacroAssembler::push_i(Register r) {
323 push(r);
324 }
326 void InterpreterMacroAssembler::push_l(Register r) {
327 subptr(rsp, 2 * wordSize);
328 movq(Address(rsp, 0), r);
329 }
331 void InterpreterMacroAssembler::push_f(XMMRegister r) {
332 subptr(rsp, wordSize);
333 movflt(Address(rsp, 0), r);
334 }
336 void InterpreterMacroAssembler::push_d(XMMRegister r) {
337 subptr(rsp, 2 * wordSize);
338 movdbl(Address(rsp, 0), r);
339 }
341 void InterpreterMacroAssembler::pop(TosState state) {
342 switch (state) {
343 case atos: pop_ptr(); break;
344 case btos:
345 case ctos:
346 case stos:
347 case itos: pop_i(); break;
348 case ltos: pop_l(); break;
349 case ftos: pop_f(); break;
350 case dtos: pop_d(); break;
351 case vtos: /* nothing to do */ break;
352 default: ShouldNotReachHere();
353 }
354 verify_oop(rax, state);
355 }
357 void InterpreterMacroAssembler::push(TosState state) {
358 verify_oop(rax, state);
359 switch (state) {
360 case atos: push_ptr(); break;
361 case btos:
362 case ctos:
363 case stos:
364 case itos: push_i(); break;
365 case ltos: push_l(); break;
366 case ftos: push_f(); break;
367 case dtos: push_d(); break;
368 case vtos: /* nothing to do */ break;
369 default : ShouldNotReachHere();
370 }
371 }
374 // Helpers for swap and dup
375 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
376 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
377 }
379 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
380 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
381 }
384 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point) {
385 MacroAssembler::call_VM_leaf_base(entry_point, 0);
386 }
389 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point,
390 Register arg_1) {
391 if (c_rarg0 != arg_1) {
392 mov(c_rarg0, arg_1);
393 }
394 MacroAssembler::call_VM_leaf_base(entry_point, 1);
395 }
398 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point,
399 Register arg_1,
400 Register arg_2) {
401 assert(c_rarg0 != arg_2, "smashed argument");
402 assert(c_rarg1 != arg_1, "smashed argument");
403 if (c_rarg0 != arg_1) {
404 mov(c_rarg0, arg_1);
405 }
406 if (c_rarg1 != arg_2) {
407 mov(c_rarg1, arg_2);
408 }
409 MacroAssembler::call_VM_leaf_base(entry_point, 2);
410 }
412 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point,
413 Register arg_1,
414 Register arg_2,
415 Register arg_3) {
416 assert(c_rarg0 != arg_2, "smashed argument");
417 assert(c_rarg0 != arg_3, "smashed argument");
418 assert(c_rarg1 != arg_1, "smashed argument");
419 assert(c_rarg1 != arg_3, "smashed argument");
420 assert(c_rarg2 != arg_1, "smashed argument");
421 assert(c_rarg2 != arg_2, "smashed argument");
422 if (c_rarg0 != arg_1) {
423 mov(c_rarg0, arg_1);
424 }
425 if (c_rarg1 != arg_2) {
426 mov(c_rarg1, arg_2);
427 }
428 if (c_rarg2 != arg_3) {
429 mov(c_rarg2, arg_3);
430 }
431 MacroAssembler::call_VM_leaf_base(entry_point, 3);
432 }
434 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
435 // set sender sp
436 lea(r13, Address(rsp, wordSize));
437 // record last_sp
438 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), r13);
439 }
442 // Jump to from_interpreted entry of a call unless single stepping is possible
443 // in this thread in which case we must call the i2i entry
444 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
445 prepare_to_jump_from_interpreted();
447 if (JvmtiExport::can_post_interpreter_events()) {
448 Label run_compiled_code;
449 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
450 // compiled code in threads for which the event is enabled. Check here for
451 // interp_only_mode if these events CAN be enabled.
452 // interp_only is an int, on little endian it is sufficient to test the byte only
453 // Is a cmpl faster?
454 cmpb(Address(r15_thread, JavaThread::interp_only_mode_offset()), 0);
455 jcc(Assembler::zero, run_compiled_code);
456 jmp(Address(method, methodOopDesc::interpreter_entry_offset()));
457 bind(run_compiled_code);
458 }
460 jmp(Address(method, methodOopDesc::from_interpreted_offset()));
462 }
465 // The following two routines provide a hook so that an implementation
466 // can schedule the dispatch in two parts. amd64 does not do this.
467 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
468 // Nothing amd64 specific to be done here
469 }
471 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
472 dispatch_next(state, step);
473 }
475 void InterpreterMacroAssembler::dispatch_base(TosState state,
476 address* table,
477 bool verifyoop) {
478 verify_FPU(1, state);
479 if (VerifyActivationFrameSize) {
480 Label L;
481 mov(rcx, rbp);
482 subptr(rcx, rsp);
483 int32_t min_frame_size =
484 (frame::link_offset - frame::interpreter_frame_initial_sp_offset) *
485 wordSize;
486 cmpptr(rcx, (int32_t)min_frame_size);
487 jcc(Assembler::greaterEqual, L);
488 stop("broken stack frame");
489 bind(L);
490 }
491 if (verifyoop) {
492 verify_oop(rax, state);
493 }
494 lea(rscratch1, ExternalAddress((address)table));
495 jmp(Address(rscratch1, rbx, Address::times_8));
496 }
498 void InterpreterMacroAssembler::dispatch_only(TosState state) {
499 dispatch_base(state, Interpreter::dispatch_table(state));
500 }
502 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
503 dispatch_base(state, Interpreter::normal_table(state));
504 }
506 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
507 dispatch_base(state, Interpreter::normal_table(state), false);
508 }
511 void InterpreterMacroAssembler::dispatch_next(TosState state, int step) {
512 // load next bytecode (load before advancing r13 to prevent AGI)
513 load_unsigned_byte(rbx, Address(r13, step));
514 // advance r13
515 increment(r13, step);
516 dispatch_base(state, Interpreter::dispatch_table(state));
517 }
519 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
520 // load current bytecode
521 load_unsigned_byte(rbx, Address(r13, 0));
522 dispatch_base(state, table);
523 }
525 // remove activation
526 //
527 // Unlock the receiver if this is a synchronized method.
528 // Unlock any Java monitors from syncronized blocks.
529 // Remove the activation from the stack.
530 //
531 // If there are locked Java monitors
532 // If throw_monitor_exception
533 // throws IllegalMonitorStateException
534 // Else if install_monitor_exception
535 // installs IllegalMonitorStateException
536 // Else
537 // no error processing
538 void InterpreterMacroAssembler::remove_activation(
539 TosState state,
540 Register ret_addr,
541 bool throw_monitor_exception,
542 bool install_monitor_exception,
543 bool notify_jvmdi) {
544 // Note: Registers rdx xmm0 may be in use for the
545 // result check if synchronized method
546 Label unlocked, unlock, no_unlock;
548 // get the value of _do_not_unlock_if_synchronized into rdx
549 const Address do_not_unlock_if_synchronized(r15_thread,
550 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
551 movbool(rdx, do_not_unlock_if_synchronized);
552 movbool(do_not_unlock_if_synchronized, false); // reset the flag
554 // get method access flags
555 movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize));
556 movl(rcx, Address(rbx, methodOopDesc::access_flags_offset()));
557 testl(rcx, JVM_ACC_SYNCHRONIZED);
558 jcc(Assembler::zero, unlocked);
560 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
561 // is set.
562 testbool(rdx);
563 jcc(Assembler::notZero, no_unlock);
565 // unlock monitor
566 push(state); // save result
568 // BasicObjectLock will be first in list, since this is a
569 // synchronized method. However, need to check that the object has
570 // not been unlocked by an explicit monitorexit bytecode.
571 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset *
572 wordSize - (int) sizeof(BasicObjectLock));
573 // We use c_rarg1 so that if we go slow path it will be the correct
574 // register for unlock_object to pass to VM directly
575 lea(c_rarg1, monitor); // address of first monitor
577 movptr(rax, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
578 testptr(rax, rax);
579 jcc(Assembler::notZero, unlock);
581 pop(state);
582 if (throw_monitor_exception) {
583 // Entry already unlocked, need to throw exception
584 call_VM(noreg, CAST_FROM_FN_PTR(address,
585 InterpreterRuntime::throw_illegal_monitor_state_exception));
586 should_not_reach_here();
587 } else {
588 // Monitor already unlocked during a stack unroll. If requested,
589 // install an illegal_monitor_state_exception. Continue with
590 // stack unrolling.
591 if (install_monitor_exception) {
592 call_VM(noreg, CAST_FROM_FN_PTR(address,
593 InterpreterRuntime::new_illegal_monitor_state_exception));
594 }
595 jmp(unlocked);
596 }
598 bind(unlock);
599 unlock_object(c_rarg1);
600 pop(state);
602 // Check that for block-structured locking (i.e., that all locked
603 // objects has been unlocked)
604 bind(unlocked);
606 // rax: Might contain return value
608 // Check that all monitors are unlocked
609 {
610 Label loop, exception, entry, restart;
611 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
612 const Address monitor_block_top(
613 rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
614 const Address monitor_block_bot(
615 rbp, frame::interpreter_frame_initial_sp_offset * wordSize);
617 bind(restart);
618 // We use c_rarg1 so that if we go slow path it will be the correct
619 // register for unlock_object to pass to VM directly
620 movptr(c_rarg1, monitor_block_top); // points to current entry, starting
621 // with top-most entry
622 lea(rbx, monitor_block_bot); // points to word before bottom of
623 // monitor block
624 jmp(entry);
626 // Entry already locked, need to throw exception
627 bind(exception);
629 if (throw_monitor_exception) {
630 // Throw exception
631 MacroAssembler::call_VM(noreg,
632 CAST_FROM_FN_PTR(address, InterpreterRuntime::
633 throw_illegal_monitor_state_exception));
634 should_not_reach_here();
635 } else {
636 // Stack unrolling. Unlock object and install illegal_monitor_exception.
637 // Unlock does not block, so don't have to worry about the frame.
638 // We don't have to preserve c_rarg1 since we are going to throw an exception.
640 push(state);
641 unlock_object(c_rarg1);
642 pop(state);
644 if (install_monitor_exception) {
645 call_VM(noreg, CAST_FROM_FN_PTR(address,
646 InterpreterRuntime::
647 new_illegal_monitor_state_exception));
648 }
650 jmp(restart);
651 }
653 bind(loop);
654 // check if current entry is used
655 cmpptr(Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()), (int32_t) NULL);
656 jcc(Assembler::notEqual, exception);
658 addptr(c_rarg1, entry_size); // otherwise advance to next entry
659 bind(entry);
660 cmpptr(c_rarg1, rbx); // check if bottom reached
661 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry
662 }
664 bind(no_unlock);
666 // jvmti support
667 if (notify_jvmdi) {
668 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
669 } else {
670 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
671 }
673 // remove activation
674 // get sender sp
675 movptr(rbx,
676 Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize));
677 leave(); // remove frame anchor
678 pop(ret_addr); // get return address
679 mov(rsp, rbx); // set sp to sender sp
680 }
682 #endif // C_INTERP
684 // Lock object
685 //
686 // Args:
687 // c_rarg1: BasicObjectLock to be used for locking
688 //
689 // Kills:
690 // rax
691 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, .. (param regs)
692 // rscratch1, rscratch2 (scratch regs)
693 void InterpreterMacroAssembler::lock_object(Register lock_reg) {
694 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1");
696 if (UseHeavyMonitors) {
697 call_VM(noreg,
698 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
699 lock_reg);
700 } else {
701 Label done;
703 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
704 const Register obj_reg = c_rarg3; // Will contain the oop
706 const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
707 const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
708 const int mark_offset = lock_offset +
709 BasicLock::displaced_header_offset_in_bytes();
711 Label slow_case;
713 // Load object pointer into obj_reg %c_rarg3
714 movptr(obj_reg, Address(lock_reg, obj_offset));
716 if (UseBiasedLocking) {
717 biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, done, &slow_case);
718 }
720 // Load immediate 1 into swap_reg %rax
721 movl(swap_reg, 1);
723 // Load (object->mark() | 1) into swap_reg %rax
724 orptr(swap_reg, Address(obj_reg, 0));
726 // Save (object->mark() | 1) into BasicLock's displaced header
727 movptr(Address(lock_reg, mark_offset), swap_reg);
729 assert(lock_offset == 0,
730 "displached header must be first word in BasicObjectLock");
732 if (os::is_MP()) lock();
733 cmpxchgptr(lock_reg, Address(obj_reg, 0));
734 if (PrintBiasedLockingStatistics) {
735 cond_inc32(Assembler::zero,
736 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
737 }
738 jcc(Assembler::zero, done);
740 // Test if the oopMark is an obvious stack pointer, i.e.,
741 // 1) (mark & 7) == 0, and
742 // 2) rsp <= mark < mark + os::pagesize()
743 //
744 // These 3 tests can be done by evaluating the following
745 // expression: ((mark - rsp) & (7 - os::vm_page_size())),
746 // assuming both stack pointer and pagesize have their
747 // least significant 3 bits clear.
748 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg
749 subptr(swap_reg, rsp);
750 andptr(swap_reg, 7 - os::vm_page_size());
752 // Save the test result, for recursive case, the result is zero
753 movptr(Address(lock_reg, mark_offset), swap_reg);
755 if (PrintBiasedLockingStatistics) {
756 cond_inc32(Assembler::zero,
757 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
758 }
759 jcc(Assembler::zero, done);
761 bind(slow_case);
763 // Call the runtime routine for slow case
764 call_VM(noreg,
765 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter),
766 lock_reg);
768 bind(done);
769 }
770 }
773 // Unlocks an object. Used in monitorexit bytecode and
774 // remove_activation. Throws an IllegalMonitorException if object is
775 // not locked by current thread.
776 //
777 // Args:
778 // c_rarg1: BasicObjectLock for lock
779 //
780 // Kills:
781 // rax
782 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs)
783 // rscratch1, rscratch2 (scratch regs)
784 void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
785 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1");
787 if (UseHeavyMonitors) {
788 call_VM(noreg,
789 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
790 lock_reg);
791 } else {
792 Label done;
794 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
795 const Register header_reg = c_rarg2; // Will contain the old oopMark
796 const Register obj_reg = c_rarg3; // Will contain the oop
798 save_bcp(); // Save in case of exception
800 // Convert from BasicObjectLock structure to object and BasicLock
801 // structure Store the BasicLock address into %rax
802 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
804 // Load oop into obj_reg(%c_rarg3)
805 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()));
807 // Free entry
808 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD);
810 if (UseBiasedLocking) {
811 biased_locking_exit(obj_reg, header_reg, done);
812 }
814 // Load the old header from BasicLock structure
815 movptr(header_reg, Address(swap_reg,
816 BasicLock::displaced_header_offset_in_bytes()));
818 // Test for recursion
819 testptr(header_reg, header_reg);
821 // zero for recursive case
822 jcc(Assembler::zero, done);
824 // Atomic swap back the old header
825 if (os::is_MP()) lock();
826 cmpxchgptr(header_reg, Address(obj_reg, 0));
828 // zero for recursive case
829 jcc(Assembler::zero, done);
831 // Call the runtime routine for slow case.
832 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()),
833 obj_reg); // restore obj
834 call_VM(noreg,
835 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit),
836 lock_reg);
838 bind(done);
840 restore_bcp();
841 }
842 }
844 #ifndef CC_INTERP
846 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp,
847 Label& zero_continue) {
848 assert(ProfileInterpreter, "must be profiling interpreter");
849 movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize));
850 testptr(mdp, mdp);
851 jcc(Assembler::zero, zero_continue);
852 }
855 // Set the method data pointer for the current bcp.
856 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
857 assert(ProfileInterpreter, "must be profiling interpreter");
858 Label set_mdp;
859 push(rax);
860 push(rbx);
862 get_method(rbx);
863 // Test MDO to avoid the call if it is NULL.
864 movptr(rax, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
865 testptr(rax, rax);
866 jcc(Assembler::zero, set_mdp);
867 // rbx: method
868 // r13: bcp
869 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, r13);
870 // rax: mdi
871 // mdo is guaranteed to be non-zero here, we checked for it before the call.
872 movptr(rbx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
873 addptr(rbx, in_bytes(methodDataOopDesc::data_offset()));
874 addptr(rax, rbx);
875 bind(set_mdp);
876 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
877 pop(rbx);
878 pop(rax);
879 }
881 void InterpreterMacroAssembler::verify_method_data_pointer() {
882 assert(ProfileInterpreter, "must be profiling interpreter");
883 #ifdef ASSERT
884 Label verify_continue;
885 push(rax);
886 push(rbx);
887 push(c_rarg3);
888 push(c_rarg2);
889 test_method_data_pointer(c_rarg3, verify_continue); // If mdp is zero, continue
890 get_method(rbx);
892 // If the mdp is valid, it will point to a DataLayout header which is
893 // consistent with the bcp. The converse is highly probable also.
894 load_unsigned_short(c_rarg2,
895 Address(c_rarg3, in_bytes(DataLayout::bci_offset())));
896 addptr(c_rarg2, Address(rbx, methodOopDesc::const_offset()));
897 lea(c_rarg2, Address(c_rarg2, constMethodOopDesc::codes_offset()));
898 cmpptr(c_rarg2, r13);
899 jcc(Assembler::equal, verify_continue);
900 // rbx: method
901 // r13: bcp
902 // c_rarg3: mdp
903 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp),
904 rbx, r13, c_rarg3);
905 bind(verify_continue);
906 pop(c_rarg2);
907 pop(c_rarg3);
908 pop(rbx);
909 pop(rax);
910 #endif // ASSERT
911 }
914 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in,
915 int constant,
916 Register value) {
917 assert(ProfileInterpreter, "must be profiling interpreter");
918 Address data(mdp_in, constant);
919 movptr(data, value);
920 }
923 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
924 int constant,
925 bool decrement) {
926 // Counter address
927 Address data(mdp_in, constant);
929 increment_mdp_data_at(data, decrement);
930 }
932 void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
933 bool decrement) {
934 assert(ProfileInterpreter, "must be profiling interpreter");
935 // %%% this does 64bit counters at best it is wasting space
936 // at worst it is a rare bug when counters overflow
938 if (decrement) {
939 // Decrement the register. Set condition codes.
940 addptr(data, (int32_t) -DataLayout::counter_increment);
941 // If the decrement causes the counter to overflow, stay negative
942 Label L;
943 jcc(Assembler::negative, L);
944 addptr(data, (int32_t) DataLayout::counter_increment);
945 bind(L);
946 } else {
947 assert(DataLayout::counter_increment == 1,
948 "flow-free idiom only works with 1");
949 // Increment the register. Set carry flag.
950 addptr(data, DataLayout::counter_increment);
951 // If the increment causes the counter to overflow, pull back by 1.
952 sbbptr(data, (int32_t)0);
953 }
954 }
957 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
958 Register reg,
959 int constant,
960 bool decrement) {
961 Address data(mdp_in, reg, Address::times_1, constant);
963 increment_mdp_data_at(data, decrement);
964 }
966 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in,
967 int flag_byte_constant) {
968 assert(ProfileInterpreter, "must be profiling interpreter");
969 int header_offset = in_bytes(DataLayout::header_offset());
970 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant);
971 // Set the flag
972 orl(Address(mdp_in, header_offset), header_bits);
973 }
977 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
978 int offset,
979 Register value,
980 Register test_value_out,
981 Label& not_equal_continue) {
982 assert(ProfileInterpreter, "must be profiling interpreter");
983 if (test_value_out == noreg) {
984 cmpptr(value, Address(mdp_in, offset));
985 } else {
986 // Put the test value into a register, so caller can use it:
987 movptr(test_value_out, Address(mdp_in, offset));
988 cmpptr(test_value_out, value);
989 }
990 jcc(Assembler::notEqual, not_equal_continue);
991 }
994 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
995 int offset_of_disp) {
996 assert(ProfileInterpreter, "must be profiling interpreter");
997 Address disp_address(mdp_in, offset_of_disp);
998 addptr(mdp_in, disp_address);
999 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
1000 }
1003 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in,
1004 Register reg,
1005 int offset_of_disp) {
1006 assert(ProfileInterpreter, "must be profiling interpreter");
1007 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
1008 addptr(mdp_in, disp_address);
1009 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
1010 }
1013 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in,
1014 int constant) {
1015 assert(ProfileInterpreter, "must be profiling interpreter");
1016 addptr(mdp_in, constant);
1017 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
1018 }
1021 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
1022 assert(ProfileInterpreter, "must be profiling interpreter");
1023 push(return_bci); // save/restore across call_VM
1024 call_VM(noreg,
1025 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret),
1026 return_bci);
1027 pop(return_bci);
1028 }
1031 void InterpreterMacroAssembler::profile_taken_branch(Register mdp,
1032 Register bumped_count) {
1033 if (ProfileInterpreter) {
1034 Label profile_continue;
1036 // If no method data exists, go to profile_continue.
1037 // Otherwise, assign to mdp
1038 test_method_data_pointer(mdp, profile_continue);
1040 // We are taking a branch. Increment the taken count.
1041 // We inline increment_mdp_data_at to return bumped_count in a register
1042 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1043 Address data(mdp, in_bytes(JumpData::taken_offset()));
1044 movptr(bumped_count, data);
1045 assert(DataLayout::counter_increment == 1,
1046 "flow-free idiom only works with 1");
1047 addptr(bumped_count, DataLayout::counter_increment);
1048 sbbptr(bumped_count, 0);
1049 movptr(data, bumped_count); // Store back out
1051 // The method data pointer needs to be updated to reflect the new target.
1052 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1053 bind(profile_continue);
1054 }
1055 }
1058 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1059 if (ProfileInterpreter) {
1060 Label profile_continue;
1062 // If no method data exists, go to profile_continue.
1063 test_method_data_pointer(mdp, profile_continue);
1065 // We are taking a branch. Increment the not taken count.
1066 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1068 // The method data pointer needs to be updated to correspond to
1069 // the next bytecode
1070 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1071 bind(profile_continue);
1072 }
1073 }
1076 void InterpreterMacroAssembler::profile_call(Register mdp) {
1077 if (ProfileInterpreter) {
1078 Label profile_continue;
1080 // If no method data exists, go to profile_continue.
1081 test_method_data_pointer(mdp, profile_continue);
1083 // We are making a call. Increment the count.
1084 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1086 // The method data pointer needs to be updated to reflect the new target.
1087 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1088 bind(profile_continue);
1089 }
1090 }
1093 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1094 if (ProfileInterpreter) {
1095 Label profile_continue;
1097 // If no method data exists, go to profile_continue.
1098 test_method_data_pointer(mdp, profile_continue);
1100 // We are making a call. Increment the count.
1101 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1103 // The method data pointer needs to be updated to reflect the new target.
1104 update_mdp_by_constant(mdp,
1105 in_bytes(VirtualCallData::
1106 virtual_call_data_size()));
1107 bind(profile_continue);
1108 }
1109 }
1112 void InterpreterMacroAssembler::profile_virtual_call(Register receiver,
1113 Register mdp,
1114 Register reg2,
1115 bool receiver_can_be_null) {
1116 if (ProfileInterpreter) {
1117 Label profile_continue;
1119 // If no method data exists, go to profile_continue.
1120 test_method_data_pointer(mdp, profile_continue);
1122 Label skip_receiver_profile;
1123 if (receiver_can_be_null) {
1124 Label not_null;
1125 testptr(receiver, receiver);
1126 jccb(Assembler::notZero, not_null);
1127 // We are making a call. Increment the count for null receiver.
1128 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1129 jmp(skip_receiver_profile);
1130 bind(not_null);
1131 }
1133 // Record the receiver type.
1134 record_klass_in_profile(receiver, mdp, reg2, true);
1135 bind(skip_receiver_profile);
1137 // The method data pointer needs to be updated to reflect the new target.
1138 update_mdp_by_constant(mdp,
1139 in_bytes(VirtualCallData::
1140 virtual_call_data_size()));
1141 bind(profile_continue);
1142 }
1143 }
1145 // This routine creates a state machine for updating the multi-row
1146 // type profile at a virtual call site (or other type-sensitive bytecode).
1147 // The machine visits each row (of receiver/count) until the receiver type
1148 // is found, or until it runs out of rows. At the same time, it remembers
1149 // the location of the first empty row. (An empty row records null for its
1150 // receiver, and can be allocated for a newly-observed receiver type.)
1151 // Because there are two degrees of freedom in the state, a simple linear
1152 // search will not work; it must be a decision tree. Hence this helper
1153 // function is recursive, to generate the required tree structured code.
1154 // It's the interpreter, so we are trading off code space for speed.
1155 // See below for example code.
1156 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1157 Register receiver, Register mdp,
1158 Register reg2, int start_row,
1159 Label& done, bool is_virtual_call) {
1160 if (TypeProfileWidth == 0) {
1161 if (is_virtual_call) {
1162 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1163 }
1164 return;
1165 }
1167 int last_row = VirtualCallData::row_limit() - 1;
1168 assert(start_row <= last_row, "must be work left to do");
1169 // Test this row for both the receiver and for null.
1170 // Take any of three different outcomes:
1171 // 1. found receiver => increment count and goto done
1172 // 2. found null => keep looking for case 1, maybe allocate this cell
1173 // 3. found something else => keep looking for cases 1 and 2
1174 // Case 3 is handled by a recursive call.
1175 for (int row = start_row; row <= last_row; row++) {
1176 Label next_test;
1177 bool test_for_null_also = (row == start_row);
1179 // See if the receiver is receiver[n].
1180 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
1181 test_mdp_data_at(mdp, recvr_offset, receiver,
1182 (test_for_null_also ? reg2 : noreg),
1183 next_test);
1184 // (Reg2 now contains the receiver from the CallData.)
1186 // The receiver is receiver[n]. Increment count[n].
1187 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
1188 increment_mdp_data_at(mdp, count_offset);
1189 jmp(done);
1190 bind(next_test);
1192 if (test_for_null_also) {
1193 Label found_null;
1194 // Failed the equality check on receiver[n]... Test for null.
1195 testptr(reg2, reg2);
1196 if (start_row == last_row) {
1197 // The only thing left to do is handle the null case.
1198 if (is_virtual_call) {
1199 jccb(Assembler::zero, found_null);
1200 // Receiver did not match any saved receiver and there is no empty row for it.
1201 // Increment total counter to indicate polymorphic case.
1202 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1203 jmp(done);
1204 bind(found_null);
1205 } else {
1206 jcc(Assembler::notZero, done);
1207 }
1208 break;
1209 }
1210 // Since null is rare, make it be the branch-taken case.
1211 jcc(Assembler::zero, found_null);
1213 // Put all the "Case 3" tests here.
1214 record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call);
1216 // Found a null. Keep searching for a matching receiver,
1217 // but remember that this is an empty (unused) slot.
1218 bind(found_null);
1219 }
1220 }
1222 // In the fall-through case, we found no matching receiver, but we
1223 // observed the receiver[start_row] is NULL.
1225 // Fill in the receiver field and increment the count.
1226 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
1227 set_mdp_data_at(mdp, recvr_offset, receiver);
1228 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
1229 movl(reg2, DataLayout::counter_increment);
1230 set_mdp_data_at(mdp, count_offset, reg2);
1231 if (start_row > 0) {
1232 jmp(done);
1233 }
1234 }
1236 // Example state machine code for three profile rows:
1237 // // main copy of decision tree, rooted at row[1]
1238 // if (row[0].rec == rec) { row[0].incr(); goto done; }
1239 // if (row[0].rec != NULL) {
1240 // // inner copy of decision tree, rooted at row[1]
1241 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1242 // if (row[1].rec != NULL) {
1243 // // degenerate decision tree, rooted at row[2]
1244 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1245 // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow
1246 // row[2].init(rec); goto done;
1247 // } else {
1248 // // remember row[1] is empty
1249 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1250 // row[1].init(rec); goto done;
1251 // }
1252 // } else {
1253 // // remember row[0] is empty
1254 // if (row[1].rec == rec) { row[1].incr(); goto done; }
1255 // if (row[2].rec == rec) { row[2].incr(); goto done; }
1256 // row[0].init(rec); goto done;
1257 // }
1258 // done:
1260 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1261 Register mdp, Register reg2,
1262 bool is_virtual_call) {
1263 assert(ProfileInterpreter, "must be profiling");
1264 Label done;
1266 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1268 bind (done);
1269 }
1271 void InterpreterMacroAssembler::profile_ret(Register return_bci,
1272 Register mdp) {
1273 if (ProfileInterpreter) {
1274 Label profile_continue;
1275 uint row;
1277 // If no method data exists, go to profile_continue.
1278 test_method_data_pointer(mdp, profile_continue);
1280 // Update the total ret count.
1281 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1283 for (row = 0; row < RetData::row_limit(); row++) {
1284 Label next_test;
1286 // See if return_bci is equal to bci[n]:
1287 test_mdp_data_at(mdp,
1288 in_bytes(RetData::bci_offset(row)),
1289 return_bci, noreg,
1290 next_test);
1292 // return_bci is equal to bci[n]. Increment the count.
1293 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1295 // The method data pointer needs to be updated to reflect the new target.
1296 update_mdp_by_offset(mdp,
1297 in_bytes(RetData::bci_displacement_offset(row)));
1298 jmp(profile_continue);
1299 bind(next_test);
1300 }
1302 update_mdp_for_ret(return_bci);
1304 bind(profile_continue);
1305 }
1306 }
1309 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1310 if (ProfileInterpreter) {
1311 Label profile_continue;
1313 // If no method data exists, go to profile_continue.
1314 test_method_data_pointer(mdp, profile_continue);
1316 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1318 // The method data pointer needs to be updated.
1319 int mdp_delta = in_bytes(BitData::bit_data_size());
1320 if (TypeProfileCasts) {
1321 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1322 }
1323 update_mdp_by_constant(mdp, mdp_delta);
1325 bind(profile_continue);
1326 }
1327 }
1330 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
1331 if (ProfileInterpreter && TypeProfileCasts) {
1332 Label profile_continue;
1334 // If no method data exists, go to profile_continue.
1335 test_method_data_pointer(mdp, profile_continue);
1337 int count_offset = in_bytes(CounterData::count_offset());
1338 // Back up the address, since we have already bumped the mdp.
1339 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1341 // *Decrement* the counter. We expect to see zero or small negatives.
1342 increment_mdp_data_at(mdp, count_offset, true);
1344 bind (profile_continue);
1345 }
1346 }
1349 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) {
1350 if (ProfileInterpreter) {
1351 Label profile_continue;
1353 // If no method data exists, go to profile_continue.
1354 test_method_data_pointer(mdp, profile_continue);
1356 // The method data pointer needs to be updated.
1357 int mdp_delta = in_bytes(BitData::bit_data_size());
1358 if (TypeProfileCasts) {
1359 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1361 // Record the object type.
1362 record_klass_in_profile(klass, mdp, reg2, false);
1363 }
1364 update_mdp_by_constant(mdp, mdp_delta);
1366 bind(profile_continue);
1367 }
1368 }
1371 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1372 if (ProfileInterpreter) {
1373 Label profile_continue;
1375 // If no method data exists, go to profile_continue.
1376 test_method_data_pointer(mdp, profile_continue);
1378 // Update the default case count
1379 increment_mdp_data_at(mdp,
1380 in_bytes(MultiBranchData::default_count_offset()));
1382 // The method data pointer needs to be updated.
1383 update_mdp_by_offset(mdp,
1384 in_bytes(MultiBranchData::
1385 default_displacement_offset()));
1387 bind(profile_continue);
1388 }
1389 }
1392 void InterpreterMacroAssembler::profile_switch_case(Register index,
1393 Register mdp,
1394 Register reg2) {
1395 if (ProfileInterpreter) {
1396 Label profile_continue;
1398 // If no method data exists, go to profile_continue.
1399 test_method_data_pointer(mdp, profile_continue);
1401 // Build the base (index * per_case_size_in_bytes()) +
1402 // case_array_offset_in_bytes()
1403 movl(reg2, in_bytes(MultiBranchData::per_case_size()));
1404 imulptr(index, reg2); // XXX l ?
1405 addptr(index, in_bytes(MultiBranchData::case_array_offset())); // XXX l ?
1407 // Update the case count
1408 increment_mdp_data_at(mdp,
1409 index,
1410 in_bytes(MultiBranchData::relative_count_offset()));
1412 // The method data pointer needs to be updated.
1413 update_mdp_by_offset(mdp,
1414 index,
1415 in_bytes(MultiBranchData::
1416 relative_displacement_offset()));
1418 bind(profile_continue);
1419 }
1420 }
1424 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
1425 if (state == atos) {
1426 MacroAssembler::verify_oop(reg);
1427 }
1428 }
1430 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
1431 }
1432 #endif // !CC_INTERP
1435 void InterpreterMacroAssembler::notify_method_entry() {
1436 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1437 // track stack depth. If it is possible to enter interp_only_mode we add
1438 // the code to check if the event should be sent.
1439 if (JvmtiExport::can_post_interpreter_events()) {
1440 Label L;
1441 movl(rdx, Address(r15_thread, JavaThread::interp_only_mode_offset()));
1442 testl(rdx, rdx);
1443 jcc(Assembler::zero, L);
1444 call_VM(noreg, CAST_FROM_FN_PTR(address,
1445 InterpreterRuntime::post_method_entry));
1446 bind(L);
1447 }
1449 {
1450 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1451 get_method(c_rarg1);
1452 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
1453 r15_thread, c_rarg1);
1454 }
1456 // RedefineClasses() tracing support for obsolete method entry
1457 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
1458 get_method(c_rarg1);
1459 call_VM_leaf(
1460 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1461 r15_thread, c_rarg1);
1462 }
1463 }
1466 void InterpreterMacroAssembler::notify_method_exit(
1467 TosState state, NotifyMethodExitMode mode) {
1468 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1469 // track stack depth. If it is possible to enter interp_only_mode we add
1470 // the code to check if the event should be sent.
1471 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1472 Label L;
1473 // Note: frame::interpreter_frame_result has a dependency on how the
1474 // method result is saved across the call to post_method_exit. If this
1475 // is changed then the interpreter_frame_result implementation will
1476 // need to be updated too.
1478 // For c++ interpreter the result is always stored at a known location in the frame
1479 // template interpreter will leave it on the top of the stack.
1480 NOT_CC_INTERP(push(state);)
1481 movl(rdx, Address(r15_thread, JavaThread::interp_only_mode_offset()));
1482 testl(rdx, rdx);
1483 jcc(Assembler::zero, L);
1484 call_VM(noreg,
1485 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1486 bind(L);
1487 NOT_CC_INTERP(pop(state));
1488 }
1490 {
1491 SkipIfEqual skip(this, &DTraceMethodProbes, false);
1492 NOT_CC_INTERP(push(state));
1493 get_method(c_rarg1);
1494 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1495 r15_thread, c_rarg1);
1496 NOT_CC_INTERP(pop(state));
1497 }
1498 }
1500 // Jump if ((*counter_addr += increment) & mask) satisfies the condition.
1501 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
1502 int increment, int mask,
1503 Register scratch, bool preloaded,
1504 Condition cond, Label* where) {
1505 if (!preloaded) {
1506 movl(scratch, counter_addr);
1507 }
1508 incrementl(scratch, increment);
1509 movl(counter_addr, scratch);
1510 andl(scratch, mask);
1511 jcc(cond, *where);
1512 }