Thu, 14 Apr 2011 13:45:41 -0700
Merge
1 /*
2 * Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "interp_masm_x86_32.hpp"
27 #include "interpreter/interpreter.hpp"
28 #include "interpreter/interpreterRuntime.hpp"
29 #include "oops/arrayOop.hpp"
30 #include "oops/markOop.hpp"
31 #include "oops/methodDataOop.hpp"
32 #include "oops/methodOop.hpp"
33 #include "prims/jvmtiExport.hpp"
34 #include "prims/jvmtiRedefineClassesTrace.hpp"
35 #include "prims/jvmtiThreadState.hpp"
36 #include "runtime/basicLock.hpp"
37 #include "runtime/biasedLocking.hpp"
38 #include "runtime/sharedRuntime.hpp"
39 #ifdef TARGET_OS_FAMILY_linux
40 # include "thread_linux.inline.hpp"
41 #endif
42 #ifdef TARGET_OS_FAMILY_solaris
43 # include "thread_solaris.inline.hpp"
44 #endif
45 #ifdef TARGET_OS_FAMILY_windows
46 # include "thread_windows.inline.hpp"
47 #endif
50 // Implementation of InterpreterMacroAssembler
51 #ifdef CC_INTERP
52 void InterpreterMacroAssembler::get_method(Register reg) {
53 movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize)));
54 movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method)));
55 }
56 #endif // CC_INTERP
59 #ifndef CC_INTERP
60 void InterpreterMacroAssembler::call_VM_leaf_base(
61 address entry_point,
62 int number_of_arguments
63 ) {
64 // interpreter specific
65 //
66 // Note: No need to save/restore bcp & locals (rsi & rdi) pointer
67 // since these are callee saved registers and no blocking/
68 // GC can happen in leaf calls.
69 // Further Note: DO NOT save/restore bcp/locals. If a caller has
70 // already saved them so that it can use rsi/rdi as temporaries
71 // then a save/restore here will DESTROY the copy the caller
72 // saved! There used to be a save_bcp() that only happened in
73 // the ASSERT path (no restore_bcp). Which caused bizarre failures
74 // when jvm built with ASSERTs.
75 #ifdef ASSERT
76 { Label L;
77 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
78 jcc(Assembler::equal, L);
79 stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL");
80 bind(L);
81 }
82 #endif
83 // super call
84 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments);
85 // interpreter specific
87 // Used to ASSERT that rsi/rdi were equal to frame's bcp/locals
88 // but since they may not have been saved (and we don't want to
89 // save them here (see note above) the assert is invalid.
90 }
93 void InterpreterMacroAssembler::call_VM_base(
94 Register oop_result,
95 Register java_thread,
96 Register last_java_sp,
97 address entry_point,
98 int number_of_arguments,
99 bool check_exceptions
100 ) {
101 #ifdef ASSERT
102 { Label L;
103 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
104 jcc(Assembler::equal, L);
105 stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL");
106 bind(L);
107 }
108 #endif /* ASSERT */
109 // interpreter specific
110 //
111 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't
112 // really make a difference for these runtime calls, since they are
113 // slow anyway. Btw., bcp must be saved/restored since it may change
114 // due to GC.
115 assert(java_thread == noreg , "not expecting a precomputed java thread");
116 save_bcp();
117 // super call
118 MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions);
119 // interpreter specific
120 restore_bcp();
121 restore_locals();
122 }
125 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) {
126 if (JvmtiExport::can_pop_frame()) {
127 Label L;
128 // Initiate popframe handling only if it is not already being processed. If the flag
129 // has the popframe_processing bit set, it means that this code is called *during* popframe
130 // handling - we don't want to reenter.
131 Register pop_cond = java_thread; // Not clear if any other register is available...
132 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset()));
133 testl(pop_cond, JavaThread::popframe_pending_bit);
134 jcc(Assembler::zero, L);
135 testl(pop_cond, JavaThread::popframe_processing_bit);
136 jcc(Assembler::notZero, L);
137 // Call Interpreter::remove_activation_preserving_args_entry() to get the
138 // address of the same-named entrypoint in the generated interpreter code.
139 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry));
140 jmp(rax);
141 bind(L);
142 get_thread(java_thread);
143 }
144 }
147 void InterpreterMacroAssembler::load_earlyret_value(TosState state) {
148 get_thread(rcx);
149 movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset()));
150 const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset());
151 const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset());
152 const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset());
153 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset()
154 + in_ByteSize(wordSize));
155 switch (state) {
156 case atos: movptr(rax, oop_addr);
157 movptr(oop_addr, NULL_WORD);
158 verify_oop(rax, state); break;
159 case ltos:
160 movl(rdx, val_addr1); // fall through
161 case btos: // fall through
162 case ctos: // fall through
163 case stos: // fall through
164 case itos: movl(rax, val_addr); break;
165 case ftos: fld_s(val_addr); break;
166 case dtos: fld_d(val_addr); break;
167 case vtos: /* nothing to do */ break;
168 default : ShouldNotReachHere();
169 }
170 // Clean up tos value in the thread object
171 movl(tos_addr, (int32_t) ilgl);
172 movptr(val_addr, NULL_WORD);
173 NOT_LP64(movptr(val_addr1, NULL_WORD));
174 }
177 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) {
178 if (JvmtiExport::can_force_early_return()) {
179 Label L;
180 Register tmp = java_thread;
181 movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset()));
182 testptr(tmp, tmp);
183 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit;
185 // Initiate earlyret handling only if it is not already being processed.
186 // If the flag has the earlyret_processing bit set, it means that this code
187 // is called *during* earlyret handling - we don't want to reenter.
188 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset()));
189 cmpl(tmp, JvmtiThreadState::earlyret_pending);
190 jcc(Assembler::notEqual, L);
192 // Call Interpreter::remove_activation_early_entry() to get the address of the
193 // same-named entrypoint in the generated interpreter code.
194 get_thread(java_thread);
195 movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset()));
196 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset()));
197 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1);
198 jmp(rax);
199 bind(L);
200 get_thread(java_thread);
201 }
202 }
205 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) {
206 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode");
207 movl(reg, Address(rsi, bcp_offset));
208 bswapl(reg);
209 shrl(reg, 16);
210 }
213 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register reg, int bcp_offset, size_t index_size) {
214 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode");
215 if (index_size == sizeof(u2)) {
216 load_unsigned_short(reg, Address(rsi, bcp_offset));
217 } else if (index_size == sizeof(u4)) {
218 assert(EnableInvokeDynamic, "giant index used only for JSR 292");
219 movl(reg, Address(rsi, bcp_offset));
220 // Check if the secondary index definition is still ~x, otherwise
221 // we have to change the following assembler code to calculate the
222 // plain index.
223 assert(constantPoolCacheOopDesc::decode_secondary_index(~123) == 123, "else change next line");
224 notl(reg); // convert to plain index
225 } else if (index_size == sizeof(u1)) {
226 assert(EnableInvokeDynamic, "tiny index used only for JSR 292");
227 load_unsigned_byte(reg, Address(rsi, bcp_offset));
228 } else {
229 ShouldNotReachHere();
230 }
231 }
234 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index,
235 int bcp_offset, size_t index_size) {
236 assert(cache != index, "must use different registers");
237 get_cache_index_at_bcp(index, bcp_offset, index_size);
238 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
239 assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
240 shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index
241 }
244 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp,
245 int bcp_offset, size_t index_size) {
246 assert(cache != tmp, "must use different register");
247 get_cache_index_at_bcp(tmp, bcp_offset, index_size);
248 assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below");
249 // convert from field index to ConstantPoolCacheEntry index
250 // and from word offset to byte offset
251 shll(tmp, 2 + LogBytesPerWord);
252 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize));
253 // skip past the header
254 addptr(cache, in_bytes(constantPoolCacheOopDesc::base_offset()));
255 addptr(cache, tmp); // construct pointer to cache entry
256 }
259 // Generate a subtype check: branch to ok_is_subtype if sub_klass is
260 // a subtype of super_klass. EAX holds the super_klass. Blows ECX.
261 // Resets EDI to locals. Register sub_klass cannot be any of the above.
262 void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) {
263 assert( Rsub_klass != rax, "rax, holds superklass" );
264 assert( Rsub_klass != rcx, "used as a temp" );
265 assert( Rsub_klass != rdi, "used as a temp, restored from locals" );
267 // Profile the not-null value's klass.
268 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi
270 // Do the check.
271 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx
273 // Profile the failure of the check.
274 profile_typecheck_failed(rcx); // blows rcx
275 }
277 void InterpreterMacroAssembler::f2ieee() {
278 if (IEEEPrecision) {
279 fstp_s(Address(rsp, 0));
280 fld_s(Address(rsp, 0));
281 }
282 }
285 void InterpreterMacroAssembler::d2ieee() {
286 if (IEEEPrecision) {
287 fstp_d(Address(rsp, 0));
288 fld_d(Address(rsp, 0));
289 }
290 }
292 // Java Expression Stack
294 void InterpreterMacroAssembler::pop_ptr(Register r) {
295 pop(r);
296 }
298 void InterpreterMacroAssembler::pop_i(Register r) {
299 pop(r);
300 }
302 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) {
303 pop(lo);
304 pop(hi);
305 }
307 void InterpreterMacroAssembler::pop_f() {
308 fld_s(Address(rsp, 0));
309 addptr(rsp, 1 * wordSize);
310 }
312 void InterpreterMacroAssembler::pop_d() {
313 fld_d(Address(rsp, 0));
314 addptr(rsp, 2 * wordSize);
315 }
318 void InterpreterMacroAssembler::pop(TosState state) {
319 switch (state) {
320 case atos: pop_ptr(rax); break;
321 case btos: // fall through
322 case ctos: // fall through
323 case stos: // fall through
324 case itos: pop_i(rax); break;
325 case ltos: pop_l(rax, rdx); break;
326 case ftos: pop_f(); break;
327 case dtos: pop_d(); break;
328 case vtos: /* nothing to do */ break;
329 default : ShouldNotReachHere();
330 }
331 verify_oop(rax, state);
332 }
334 void InterpreterMacroAssembler::push_ptr(Register r) {
335 push(r);
336 }
338 void InterpreterMacroAssembler::push_i(Register r) {
339 push(r);
340 }
342 void InterpreterMacroAssembler::push_l(Register lo, Register hi) {
343 push(hi);
344 push(lo);
345 }
347 void InterpreterMacroAssembler::push_f() {
348 // Do not schedule for no AGI! Never write beyond rsp!
349 subptr(rsp, 1 * wordSize);
350 fstp_s(Address(rsp, 0));
351 }
353 void InterpreterMacroAssembler::push_d(Register r) {
354 // Do not schedule for no AGI! Never write beyond rsp!
355 subptr(rsp, 2 * wordSize);
356 fstp_d(Address(rsp, 0));
357 }
360 void InterpreterMacroAssembler::push(TosState state) {
361 verify_oop(rax, state);
362 switch (state) {
363 case atos: push_ptr(rax); break;
364 case btos: // fall through
365 case ctos: // fall through
366 case stos: // fall through
367 case itos: push_i(rax); break;
368 case ltos: push_l(rax, rdx); break;
369 case ftos: push_f(); break;
370 case dtos: push_d(rax); break;
371 case vtos: /* nothing to do */ break;
372 default : ShouldNotReachHere();
373 }
374 }
377 // Helpers for swap and dup
378 void InterpreterMacroAssembler::load_ptr(int n, Register val) {
379 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n)));
380 }
382 void InterpreterMacroAssembler::store_ptr(int n, Register val) {
383 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val);
384 }
386 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point) {
387 MacroAssembler::call_VM_leaf_base(entry_point, 0);
388 }
391 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1) {
392 push(arg_1);
393 MacroAssembler::call_VM_leaf_base(entry_point, 1);
394 }
397 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1, Register arg_2) {
398 push(arg_2);
399 push(arg_1);
400 MacroAssembler::call_VM_leaf_base(entry_point, 2);
401 }
404 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1, Register arg_2, Register arg_3) {
405 push(arg_3);
406 push(arg_2);
407 push(arg_1);
408 MacroAssembler::call_VM_leaf_base(entry_point, 3);
409 }
412 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() {
413 // set sender sp
414 lea(rsi, Address(rsp, wordSize));
415 // record last_sp
416 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi);
417 }
420 // Jump to from_interpreted entry of a call unless single stepping is possible
421 // in this thread in which case we must call the i2i entry
422 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) {
423 prepare_to_jump_from_interpreted();
425 if (JvmtiExport::can_post_interpreter_events()) {
426 Label run_compiled_code;
427 // JVMTI events, such as single-stepping, are implemented partly by avoiding running
428 // compiled code in threads for which the event is enabled. Check here for
429 // interp_only_mode if these events CAN be enabled.
430 get_thread(temp);
431 // interp_only is an int, on little endian it is sufficient to test the byte only
432 // Is a cmpl faster (ce
433 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0);
434 jcc(Assembler::zero, run_compiled_code);
435 jmp(Address(method, methodOopDesc::interpreter_entry_offset()));
436 bind(run_compiled_code);
437 }
439 jmp(Address(method, methodOopDesc::from_interpreted_offset()));
441 }
444 // The following two routines provide a hook so that an implementation
445 // can schedule the dispatch in two parts. Intel does not do this.
446 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) {
447 // Nothing Intel-specific to be done here.
448 }
450 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) {
451 dispatch_next(state, step);
452 }
454 void InterpreterMacroAssembler::dispatch_base(TosState state, address* table,
455 bool verifyoop) {
456 verify_FPU(1, state);
457 if (VerifyActivationFrameSize) {
458 Label L;
459 mov(rcx, rbp);
460 subptr(rcx, rsp);
461 int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize;
462 cmpptr(rcx, min_frame_size);
463 jcc(Assembler::greaterEqual, L);
464 stop("broken stack frame");
465 bind(L);
466 }
467 if (verifyoop) verify_oop(rax, state);
468 Address index(noreg, rbx, Address::times_ptr);
469 ExternalAddress tbl((address)table);
470 ArrayAddress dispatch(tbl, index);
471 jump(dispatch);
472 }
475 void InterpreterMacroAssembler::dispatch_only(TosState state) {
476 dispatch_base(state, Interpreter::dispatch_table(state));
477 }
480 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) {
481 dispatch_base(state, Interpreter::normal_table(state));
482 }
484 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) {
485 dispatch_base(state, Interpreter::normal_table(state), false);
486 }
489 void InterpreterMacroAssembler::dispatch_next(TosState state, int step) {
490 // load next bytecode (load before advancing rsi to prevent AGI)
491 load_unsigned_byte(rbx, Address(rsi, step));
492 // advance rsi
493 increment(rsi, step);
494 dispatch_base(state, Interpreter::dispatch_table(state));
495 }
498 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) {
499 // load current bytecode
500 load_unsigned_byte(rbx, Address(rsi, 0));
501 dispatch_base(state, table);
502 }
504 // remove activation
505 //
506 // Unlock the receiver if this is a synchronized method.
507 // Unlock any Java monitors from syncronized blocks.
508 // Remove the activation from the stack.
509 //
510 // If there are locked Java monitors
511 // If throw_monitor_exception
512 // throws IllegalMonitorStateException
513 // Else if install_monitor_exception
514 // installs IllegalMonitorStateException
515 // Else
516 // no error processing
517 void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr,
518 bool throw_monitor_exception,
519 bool install_monitor_exception,
520 bool notify_jvmdi) {
521 // Note: Registers rax, rdx and FPU ST(0) may be in use for the result
522 // check if synchronized method
523 Label unlocked, unlock, no_unlock;
525 get_thread(rcx);
526 const Address do_not_unlock_if_synchronized(rcx,
527 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
529 movbool(rbx, do_not_unlock_if_synchronized);
530 mov(rdi,rbx);
531 movbool(do_not_unlock_if_synchronized, false); // reset the flag
533 movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags
534 movl(rcx, Address(rbx, methodOopDesc::access_flags_offset()));
536 testl(rcx, JVM_ACC_SYNCHRONIZED);
537 jcc(Assembler::zero, unlocked);
539 // Don't unlock anything if the _do_not_unlock_if_synchronized flag
540 // is set.
541 mov(rcx,rdi);
542 testbool(rcx);
543 jcc(Assembler::notZero, no_unlock);
545 // unlock monitor
546 push(state); // save result
548 // BasicObjectLock will be first in list, since this is a synchronized method. However, need
549 // to check that the object has not been unlocked by an explicit monitorexit bytecode.
550 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock));
551 lea (rdx, monitor); // address of first monitor
553 movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes()));
554 testptr(rax, rax);
555 jcc (Assembler::notZero, unlock);
557 pop(state);
558 if (throw_monitor_exception) {
559 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
561 // Entry already unlocked, need to throw exception
562 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
563 should_not_reach_here();
564 } else {
565 // Monitor already unlocked during a stack unroll.
566 // If requested, install an illegal_monitor_state_exception.
567 // Continue with stack unrolling.
568 if (install_monitor_exception) {
569 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
570 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
571 }
572 jmp(unlocked);
573 }
575 bind(unlock);
576 unlock_object(rdx);
577 pop(state);
579 // Check that for block-structured locking (i.e., that all locked objects has been unlocked)
580 bind(unlocked);
582 // rax, rdx: Might contain return value
584 // Check that all monitors are unlocked
585 {
586 Label loop, exception, entry, restart;
587 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
588 const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize);
589 const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset * wordSize);
591 bind(restart);
592 movptr(rcx, monitor_block_top); // points to current entry, starting with top-most entry
593 lea(rbx, monitor_block_bot); // points to word before bottom of monitor block
594 jmp(entry);
596 // Entry already locked, need to throw exception
597 bind(exception);
599 if (throw_monitor_exception) {
600 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
602 // Throw exception
603 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception));
604 should_not_reach_here();
605 } else {
606 // Stack unrolling. Unlock object and install illegal_monitor_exception
607 // Unlock does not block, so don't have to worry about the frame
609 push(state);
610 mov(rdx, rcx);
611 unlock_object(rdx);
612 pop(state);
614 if (install_monitor_exception) {
615 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow
616 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception));
617 }
619 jmp(restart);
620 }
622 bind(loop);
623 cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); // check if current entry is used
624 jcc(Assembler::notEqual, exception);
626 addptr(rcx, entry_size); // otherwise advance to next entry
627 bind(entry);
628 cmpptr(rcx, rbx); // check if bottom reached
629 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry
630 }
632 bind(no_unlock);
634 // jvmti support
635 if (notify_jvmdi) {
636 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA
637 } else {
638 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA
639 }
641 // remove activation
642 movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp
643 leave(); // remove frame anchor
644 pop(ret_addr); // get return address
645 mov(rsp, rbx); // set sp to sender sp
646 if (UseSSE) {
647 // float and double are returned in xmm register in SSE-mode
648 if (state == ftos && UseSSE >= 1) {
649 subptr(rsp, wordSize);
650 fstp_s(Address(rsp, 0));
651 movflt(xmm0, Address(rsp, 0));
652 addptr(rsp, wordSize);
653 } else if (state == dtos && UseSSE >= 2) {
654 subptr(rsp, 2*wordSize);
655 fstp_d(Address(rsp, 0));
656 movdbl(xmm0, Address(rsp, 0));
657 addptr(rsp, 2*wordSize);
658 }
659 }
660 }
662 #endif /* !CC_INTERP */
665 // Lock object
666 //
667 // Argument: rdx : Points to BasicObjectLock to be used for locking. Must
668 // be initialized with object to lock
669 void InterpreterMacroAssembler::lock_object(Register lock_reg) {
670 assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");
672 if (UseHeavyMonitors) {
673 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
674 } else {
676 Label done;
678 const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
679 const Register obj_reg = rcx; // Will contain the oop
681 const int obj_offset = BasicObjectLock::obj_offset_in_bytes();
682 const int lock_offset = BasicObjectLock::lock_offset_in_bytes ();
683 const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes();
685 Label slow_case;
687 // Load object pointer into obj_reg %rcx
688 movptr(obj_reg, Address(lock_reg, obj_offset));
690 if (UseBiasedLocking) {
691 // Note: we use noreg for the temporary register since it's hard
692 // to come up with a free register on all incoming code paths
693 biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case);
694 }
696 // Load immediate 1 into swap_reg %rax,
697 movptr(swap_reg, (int32_t)1);
699 // Load (object->mark() | 1) into swap_reg %rax,
700 orptr(swap_reg, Address(obj_reg, 0));
702 // Save (object->mark() | 1) into BasicLock's displaced header
703 movptr(Address(lock_reg, mark_offset), swap_reg);
705 assert(lock_offset == 0, "displached header must be first word in BasicObjectLock");
706 if (os::is_MP()) {
707 lock();
708 }
709 cmpxchgptr(lock_reg, Address(obj_reg, 0));
710 if (PrintBiasedLockingStatistics) {
711 cond_inc32(Assembler::zero,
712 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
713 }
714 jcc(Assembler::zero, done);
716 // Test if the oopMark is an obvious stack pointer, i.e.,
717 // 1) (mark & 3) == 0, and
718 // 2) rsp <= mark < mark + os::pagesize()
719 //
720 // These 3 tests can be done by evaluating the following
721 // expression: ((mark - rsp) & (3 - os::vm_page_size())),
722 // assuming both stack pointer and pagesize have their
723 // least significant 2 bits clear.
724 // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg
725 subptr(swap_reg, rsp);
726 andptr(swap_reg, 3 - os::vm_page_size());
728 // Save the test result, for recursive case, the result is zero
729 movptr(Address(lock_reg, mark_offset), swap_reg);
731 if (PrintBiasedLockingStatistics) {
732 cond_inc32(Assembler::zero,
733 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr()));
734 }
735 jcc(Assembler::zero, done);
737 bind(slow_case);
739 // Call the runtime routine for slow case
740 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg);
742 bind(done);
743 }
744 }
747 // Unlocks an object. Used in monitorexit bytecode and remove_activation.
748 //
749 // Argument: rdx : Points to BasicObjectLock structure for lock
750 // Throw an IllegalMonitorException if object is not locked by current thread
751 //
752 // Uses: rax, rbx, rcx, rdx
753 void InterpreterMacroAssembler::unlock_object(Register lock_reg) {
754 assert(lock_reg == rdx, "The argument is only for looks. It must be rdx");
756 if (UseHeavyMonitors) {
757 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
758 } else {
759 Label done;
761 const Register swap_reg = rax; // Must use rax, for cmpxchg instruction
762 const Register header_reg = rbx; // Will contain the old oopMark
763 const Register obj_reg = rcx; // Will contain the oop
765 save_bcp(); // Save in case of exception
767 // Convert from BasicObjectLock structure to object and BasicLock structure
768 // Store the BasicLock address into %rax,
769 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes()));
771 // Load oop into obj_reg(%rcx)
772 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ()));
774 // Free entry
775 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD);
777 if (UseBiasedLocking) {
778 biased_locking_exit(obj_reg, header_reg, done);
779 }
781 // Load the old header from BasicLock structure
782 movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes()));
784 // Test for recursion
785 testptr(header_reg, header_reg);
787 // zero for recursive case
788 jcc(Assembler::zero, done);
790 // Atomic swap back the old header
791 if (os::is_MP()) lock();
792 cmpxchgptr(header_reg, Address(obj_reg, 0));
794 // zero for recursive case
795 jcc(Assembler::zero, done);
797 // Call the runtime routine for slow case.
798 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj
799 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg);
801 bind(done);
803 restore_bcp();
804 }
805 }
808 #ifndef CC_INTERP
810 // Test ImethodDataPtr. If it is null, continue at the specified label
811 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) {
812 assert(ProfileInterpreter, "must be profiling interpreter");
813 movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize));
814 testptr(mdp, mdp);
815 jcc(Assembler::zero, zero_continue);
816 }
819 // Set the method data pointer for the current bcp.
820 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() {
821 assert(ProfileInterpreter, "must be profiling interpreter");
822 Label set_mdp;
823 push(rax);
824 push(rbx);
826 get_method(rbx);
827 // Test MDO to avoid the call if it is NULL.
828 movptr(rax, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
829 testptr(rax, rax);
830 jcc(Assembler::zero, set_mdp);
831 // rbx,: method
832 // rsi: bcp
833 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi);
834 // rax,: mdi
835 // mdo is guaranteed to be non-zero here, we checked for it before the call.
836 movptr(rbx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
837 addptr(rbx, in_bytes(methodDataOopDesc::data_offset()));
838 addptr(rax, rbx);
839 bind(set_mdp);
840 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax);
841 pop(rbx);
842 pop(rax);
843 }
845 void InterpreterMacroAssembler::verify_method_data_pointer() {
846 assert(ProfileInterpreter, "must be profiling interpreter");
847 #ifdef ASSERT
848 Label verify_continue;
849 push(rax);
850 push(rbx);
851 push(rcx);
852 push(rdx);
853 test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue
854 get_method(rbx);
856 // If the mdp is valid, it will point to a DataLayout header which is
857 // consistent with the bcp. The converse is highly probable also.
858 load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset())));
859 addptr(rdx, Address(rbx, methodOopDesc::const_offset()));
860 lea(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
861 cmpptr(rdx, rsi);
862 jcc(Assembler::equal, verify_continue);
863 // rbx,: method
864 // rsi: bcp
865 // rcx: mdp
866 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx);
867 bind(verify_continue);
868 pop(rdx);
869 pop(rcx);
870 pop(rbx);
871 pop(rax);
872 #endif // ASSERT
873 }
876 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) {
877 // %%% this seems to be used to store counter data which is surely 32bits
878 // however 64bit side stores 64 bits which seems wrong
879 assert(ProfileInterpreter, "must be profiling interpreter");
880 Address data(mdp_in, constant);
881 movptr(data, value);
882 }
885 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
886 int constant,
887 bool decrement) {
888 // Counter address
889 Address data(mdp_in, constant);
891 increment_mdp_data_at(data, decrement);
892 }
895 void InterpreterMacroAssembler::increment_mdp_data_at(Address data,
896 bool decrement) {
898 assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
899 assert(ProfileInterpreter, "must be profiling interpreter");
901 // %%% 64bit treats this as 64 bit which seems unlikely
902 if (decrement) {
903 // Decrement the register. Set condition codes.
904 addl(data, -DataLayout::counter_increment);
905 // If the decrement causes the counter to overflow, stay negative
906 Label L;
907 jcc(Assembler::negative, L);
908 addl(data, DataLayout::counter_increment);
909 bind(L);
910 } else {
911 assert(DataLayout::counter_increment == 1,
912 "flow-free idiom only works with 1");
913 // Increment the register. Set carry flag.
914 addl(data, DataLayout::counter_increment);
915 // If the increment causes the counter to overflow, pull back by 1.
916 sbbl(data, 0);
917 }
918 }
921 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in,
922 Register reg,
923 int constant,
924 bool decrement) {
925 Address data(mdp_in, reg, Address::times_1, constant);
927 increment_mdp_data_at(data, decrement);
928 }
931 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) {
932 assert(ProfileInterpreter, "must be profiling interpreter");
933 int header_offset = in_bytes(DataLayout::header_offset());
934 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant);
935 // Set the flag
936 orl(Address(mdp_in, header_offset), header_bits);
937 }
941 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in,
942 int offset,
943 Register value,
944 Register test_value_out,
945 Label& not_equal_continue) {
946 assert(ProfileInterpreter, "must be profiling interpreter");
947 if (test_value_out == noreg) {
948 cmpptr(value, Address(mdp_in, offset));
949 } else {
950 // Put the test value into a register, so caller can use it:
951 movptr(test_value_out, Address(mdp_in, offset));
952 cmpptr(test_value_out, value);
953 }
954 jcc(Assembler::notEqual, not_equal_continue);
955 }
958 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) {
959 assert(ProfileInterpreter, "must be profiling interpreter");
960 Address disp_address(mdp_in, offset_of_disp);
961 addptr(mdp_in,disp_address);
962 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
963 }
966 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) {
967 assert(ProfileInterpreter, "must be profiling interpreter");
968 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp);
969 addptr(mdp_in, disp_address);
970 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
971 }
974 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) {
975 assert(ProfileInterpreter, "must be profiling interpreter");
976 addptr(mdp_in, constant);
977 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in);
978 }
981 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) {
982 assert(ProfileInterpreter, "must be profiling interpreter");
983 push(return_bci); // save/restore across call_VM
984 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci);
985 pop(return_bci);
986 }
989 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) {
990 if (ProfileInterpreter) {
991 Label profile_continue;
993 // If no method data exists, go to profile_continue.
994 // Otherwise, assign to mdp
995 test_method_data_pointer(mdp, profile_continue);
997 // We are taking a branch. Increment the taken count.
998 // We inline increment_mdp_data_at to return bumped_count in a register
999 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset()));
1000 Address data(mdp, in_bytes(JumpData::taken_offset()));
1002 // %%% 64bit treats these cells as 64 bit but they seem to be 32 bit
1003 movl(bumped_count,data);
1004 assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" );
1005 addl(bumped_count, DataLayout::counter_increment);
1006 sbbl(bumped_count, 0);
1007 movl(data,bumped_count); // Store back out
1009 // The method data pointer needs to be updated to reflect the new target.
1010 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset()));
1011 bind (profile_continue);
1012 }
1013 }
1016 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) {
1017 if (ProfileInterpreter) {
1018 Label profile_continue;
1020 // If no method data exists, go to profile_continue.
1021 test_method_data_pointer(mdp, profile_continue);
1023 // We are taking a branch. Increment the not taken count.
1024 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()));
1026 // The method data pointer needs to be updated to correspond to the next bytecode
1027 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size()));
1028 bind (profile_continue);
1029 }
1030 }
1033 void InterpreterMacroAssembler::profile_call(Register mdp) {
1034 if (ProfileInterpreter) {
1035 Label profile_continue;
1037 // If no method data exists, go to profile_continue.
1038 test_method_data_pointer(mdp, profile_continue);
1040 // We are making a call. Increment the count.
1041 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1043 // The method data pointer needs to be updated to reflect the new target.
1044 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size()));
1045 bind (profile_continue);
1046 }
1047 }
1050 void InterpreterMacroAssembler::profile_final_call(Register mdp) {
1051 if (ProfileInterpreter) {
1052 Label profile_continue;
1054 // If no method data exists, go to profile_continue.
1055 test_method_data_pointer(mdp, profile_continue);
1057 // We are making a call. Increment the count.
1058 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1060 // The method data pointer needs to be updated to reflect the new target.
1061 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size()));
1062 bind (profile_continue);
1063 }
1064 }
1067 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp,
1068 Register reg2,
1069 bool receiver_can_be_null) {
1070 if (ProfileInterpreter) {
1071 Label profile_continue;
1073 // If no method data exists, go to profile_continue.
1074 test_method_data_pointer(mdp, profile_continue);
1076 Label skip_receiver_profile;
1077 if (receiver_can_be_null) {
1078 Label not_null;
1079 testptr(receiver, receiver);
1080 jccb(Assembler::notZero, not_null);
1081 // We are making a call. Increment the count for null receiver.
1082 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1083 jmp(skip_receiver_profile);
1084 bind(not_null);
1085 }
1087 // Record the receiver type.
1088 record_klass_in_profile(receiver, mdp, reg2, true);
1089 bind(skip_receiver_profile);
1091 // The method data pointer needs to be updated to reflect the new target.
1092 update_mdp_by_constant(mdp,
1093 in_bytes(VirtualCallData::
1094 virtual_call_data_size()));
1095 bind(profile_continue);
1096 }
1097 }
1100 void InterpreterMacroAssembler::record_klass_in_profile_helper(
1101 Register receiver, Register mdp,
1102 Register reg2, int start_row,
1103 Label& done, bool is_virtual_call) {
1104 if (TypeProfileWidth == 0) {
1105 if (is_virtual_call) {
1106 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1107 }
1108 return;
1109 }
1111 int last_row = VirtualCallData::row_limit() - 1;
1112 assert(start_row <= last_row, "must be work left to do");
1113 // Test this row for both the receiver and for null.
1114 // Take any of three different outcomes:
1115 // 1. found receiver => increment count and goto done
1116 // 2. found null => keep looking for case 1, maybe allocate this cell
1117 // 3. found something else => keep looking for cases 1 and 2
1118 // Case 3 is handled by a recursive call.
1119 for (int row = start_row; row <= last_row; row++) {
1120 Label next_test;
1121 bool test_for_null_also = (row == start_row);
1123 // See if the receiver is receiver[n].
1124 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row));
1125 test_mdp_data_at(mdp, recvr_offset, receiver,
1126 (test_for_null_also ? reg2 : noreg),
1127 next_test);
1128 // (Reg2 now contains the receiver from the CallData.)
1130 // The receiver is receiver[n]. Increment count[n].
1131 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row));
1132 increment_mdp_data_at(mdp, count_offset);
1133 jmp(done);
1134 bind(next_test);
1136 if (row == start_row) {
1137 Label found_null;
1138 // Failed the equality check on receiver[n]... Test for null.
1139 testptr(reg2, reg2);
1140 if (start_row == last_row) {
1141 // The only thing left to do is handle the null case.
1142 if (is_virtual_call) {
1143 jccb(Assembler::zero, found_null);
1144 // Receiver did not match any saved receiver and there is no empty row for it.
1145 // Increment total counter to indicate polymorphic case.
1146 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1147 jmp(done);
1148 bind(found_null);
1149 } else {
1150 jcc(Assembler::notZero, done);
1151 }
1152 break;
1153 }
1154 // Since null is rare, make it be the branch-taken case.
1155 jcc(Assembler::zero, found_null);
1157 // Put all the "Case 3" tests here.
1158 record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call);
1160 // Found a null. Keep searching for a matching receiver,
1161 // but remember that this is an empty (unused) slot.
1162 bind(found_null);
1163 }
1164 }
1166 // In the fall-through case, we found no matching receiver, but we
1167 // observed the receiver[start_row] is NULL.
1169 // Fill in the receiver field and increment the count.
1170 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row));
1171 set_mdp_data_at(mdp, recvr_offset, receiver);
1172 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row));
1173 movptr(reg2, (int32_t)DataLayout::counter_increment);
1174 set_mdp_data_at(mdp, count_offset, reg2);
1175 if (start_row > 0) {
1176 jmp(done);
1177 }
1178 }
1180 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver,
1181 Register mdp, Register reg2,
1182 bool is_virtual_call) {
1183 assert(ProfileInterpreter, "must be profiling");
1184 Label done;
1186 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call);
1188 bind (done);
1189 }
1191 void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) {
1192 if (ProfileInterpreter) {
1193 Label profile_continue;
1194 uint row;
1196 // If no method data exists, go to profile_continue.
1197 test_method_data_pointer(mdp, profile_continue);
1199 // Update the total ret count.
1200 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset()));
1202 for (row = 0; row < RetData::row_limit(); row++) {
1203 Label next_test;
1205 // See if return_bci is equal to bci[n]:
1206 test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci,
1207 noreg, next_test);
1209 // return_bci is equal to bci[n]. Increment the count.
1210 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row)));
1212 // The method data pointer needs to be updated to reflect the new target.
1213 update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row)));
1214 jmp(profile_continue);
1215 bind(next_test);
1216 }
1218 update_mdp_for_ret(return_bci);
1220 bind (profile_continue);
1221 }
1222 }
1225 void InterpreterMacroAssembler::profile_null_seen(Register mdp) {
1226 if (ProfileInterpreter) {
1227 Label profile_continue;
1229 // If no method data exists, go to profile_continue.
1230 test_method_data_pointer(mdp, profile_continue);
1232 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant());
1234 // The method data pointer needs to be updated.
1235 int mdp_delta = in_bytes(BitData::bit_data_size());
1236 if (TypeProfileCasts) {
1237 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1238 }
1239 update_mdp_by_constant(mdp, mdp_delta);
1241 bind (profile_continue);
1242 }
1243 }
1246 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) {
1247 if (ProfileInterpreter && TypeProfileCasts) {
1248 Label profile_continue;
1250 // If no method data exists, go to profile_continue.
1251 test_method_data_pointer(mdp, profile_continue);
1253 int count_offset = in_bytes(CounterData::count_offset());
1254 // Back up the address, since we have already bumped the mdp.
1255 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size());
1257 // *Decrement* the counter. We expect to see zero or small negatives.
1258 increment_mdp_data_at(mdp, count_offset, true);
1260 bind (profile_continue);
1261 }
1262 }
1265 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2)
1266 {
1267 if (ProfileInterpreter) {
1268 Label profile_continue;
1270 // If no method data exists, go to profile_continue.
1271 test_method_data_pointer(mdp, profile_continue);
1273 // The method data pointer needs to be updated.
1274 int mdp_delta = in_bytes(BitData::bit_data_size());
1275 if (TypeProfileCasts) {
1276 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size());
1278 // Record the object type.
1279 record_klass_in_profile(klass, mdp, reg2, false);
1280 assert(reg2 == rdi, "we know how to fix this blown reg");
1281 restore_locals(); // Restore EDI
1282 }
1283 update_mdp_by_constant(mdp, mdp_delta);
1285 bind(profile_continue);
1286 }
1287 }
1290 void InterpreterMacroAssembler::profile_switch_default(Register mdp) {
1291 if (ProfileInterpreter) {
1292 Label profile_continue;
1294 // If no method data exists, go to profile_continue.
1295 test_method_data_pointer(mdp, profile_continue);
1297 // Update the default case count
1298 increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset()));
1300 // The method data pointer needs to be updated.
1301 update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset()));
1303 bind (profile_continue);
1304 }
1305 }
1308 void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) {
1309 if (ProfileInterpreter) {
1310 Label profile_continue;
1312 // If no method data exists, go to profile_continue.
1313 test_method_data_pointer(mdp, profile_continue);
1315 // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes()
1316 movptr(reg2, (int32_t)in_bytes(MultiBranchData::per_case_size()));
1317 // index is positive and so should have correct value if this code were
1318 // used on 64bits
1319 imulptr(index, reg2);
1320 addptr(index, in_bytes(MultiBranchData::case_array_offset()));
1322 // Update the case count
1323 increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset()));
1325 // The method data pointer needs to be updated.
1326 update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset()));
1328 bind (profile_continue);
1329 }
1330 }
1332 #endif // !CC_INTERP
1336 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) {
1337 if (state == atos) MacroAssembler::verify_oop(reg);
1338 }
1341 #ifndef CC_INTERP
1342 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) {
1343 if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth);
1344 }
1346 #endif /* CC_INTERP */
1349 void InterpreterMacroAssembler::notify_method_entry() {
1350 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1351 // track stack depth. If it is possible to enter interp_only_mode we add
1352 // the code to check if the event should be sent.
1353 if (JvmtiExport::can_post_interpreter_events()) {
1354 Label L;
1355 get_thread(rcx);
1356 movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
1357 testl(rcx,rcx);
1358 jcc(Assembler::zero, L);
1359 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry));
1360 bind(L);
1361 }
1363 {
1364 SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
1365 get_thread(rcx);
1366 get_method(rbx);
1367 call_VM_leaf(
1368 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx);
1369 }
1371 // RedefineClasses() tracing support for obsolete method entry
1372 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
1373 get_thread(rcx);
1374 get_method(rbx);
1375 call_VM_leaf(
1376 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
1377 rcx, rbx);
1378 }
1379 }
1382 void InterpreterMacroAssembler::notify_method_exit(
1383 TosState state, NotifyMethodExitMode mode) {
1384 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to
1385 // track stack depth. If it is possible to enter interp_only_mode we add
1386 // the code to check if the event should be sent.
1387 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) {
1388 Label L;
1389 // Note: frame::interpreter_frame_result has a dependency on how the
1390 // method result is saved across the call to post_method_exit. If this
1391 // is changed then the interpreter_frame_result implementation will
1392 // need to be updated too.
1394 // For c++ interpreter the result is always stored at a known location in the frame
1395 // template interpreter will leave it on the top of the stack.
1396 NOT_CC_INTERP(push(state);)
1397 get_thread(rcx);
1398 movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset()));
1399 testl(rcx,rcx);
1400 jcc(Assembler::zero, L);
1401 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit));
1402 bind(L);
1403 NOT_CC_INTERP(pop(state);)
1404 }
1406 {
1407 SkipIfEqual skip_if(this, &DTraceMethodProbes, 0);
1408 NOT_CC_INTERP(push(state));
1409 get_thread(rbx);
1410 get_method(rcx);
1411 call_VM_leaf(
1412 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
1413 rbx, rcx);
1414 NOT_CC_INTERP(pop(state));
1415 }
1416 }
1418 // Jump if ((*counter_addr += increment) & mask) satisfies the condition.
1419 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr,
1420 int increment, int mask,
1421 Register scratch, bool preloaded,
1422 Condition cond, Label* where) {
1423 if (!preloaded) {
1424 movl(scratch, counter_addr);
1425 }
1426 incrementl(scratch, increment);
1427 movl(counter_addr, scratch);
1428 andl(scratch, mask);
1429 jcc(cond, *where);
1430 }