Thu, 31 Mar 2011 02:31:57 -0700
6817525: turn on method handle functionality by default for JSR 292
Summary: After appropriate testing, we need to turn on EnableMethodHandles and EnableInvokeDynamic by default.
Reviewed-by: never, kvn, jrose, phh
1 /*
2 * Copyright (c) 2003, 2011, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/assembler.hpp"
27 #include "interpreter/bytecodeHistogram.hpp"
28 #include "interpreter/interpreter.hpp"
29 #include "interpreter/interpreterGenerator.hpp"
30 #include "interpreter/interpreterRuntime.hpp"
31 #include "interpreter/templateTable.hpp"
32 #include "oops/arrayOop.hpp"
33 #include "oops/methodDataOop.hpp"
34 #include "oops/methodOop.hpp"
35 #include "oops/oop.inline.hpp"
36 #include "prims/jvmtiExport.hpp"
37 #include "prims/jvmtiThreadState.hpp"
38 #include "runtime/arguments.hpp"
39 #include "runtime/deoptimization.hpp"
40 #include "runtime/frame.inline.hpp"
41 #include "runtime/sharedRuntime.hpp"
42 #include "runtime/stubRoutines.hpp"
43 #include "runtime/synchronizer.hpp"
44 #include "runtime/timer.hpp"
45 #include "runtime/vframeArray.hpp"
46 #include "utilities/debug.hpp"
48 #define __ _masm->
50 #ifndef CC_INTERP
52 const int method_offset = frame::interpreter_frame_method_offset * wordSize;
53 const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize;
54 const int locals_offset = frame::interpreter_frame_locals_offset * wordSize;
56 //-----------------------------------------------------------------------------
58 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
59 address entry = __ pc();
61 #ifdef ASSERT
62 {
63 Label L;
64 __ lea(rax, Address(rbp,
65 frame::interpreter_frame_monitor_block_top_offset *
66 wordSize));
67 __ cmpptr(rax, rsp); // rax = maximal rsp for current rbp (stack
68 // grows negative)
69 __ jcc(Assembler::aboveEqual, L); // check if frame is complete
70 __ stop ("interpreter frame not set up");
71 __ bind(L);
72 }
73 #endif // ASSERT
74 // Restore bcp under the assumption that the current frame is still
75 // interpreted
76 __ restore_bcp();
78 // expression stack must be empty before entering the VM if an
79 // exception happened
80 __ empty_expression_stack();
81 // throw exception
82 __ call_VM(noreg,
83 CAST_FROM_FN_PTR(address,
84 InterpreterRuntime::throw_StackOverflowError));
85 return entry;
86 }
88 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(
89 const char* name) {
90 address entry = __ pc();
91 // expression stack must be empty before entering the VM if an
92 // exception happened
93 __ empty_expression_stack();
94 // setup parameters
95 // ??? convention: expect aberrant index in register ebx
96 __ lea(c_rarg1, ExternalAddress((address)name));
97 __ call_VM(noreg,
98 CAST_FROM_FN_PTR(address,
99 InterpreterRuntime::
100 throw_ArrayIndexOutOfBoundsException),
101 c_rarg1, rbx);
102 return entry;
103 }
105 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
106 address entry = __ pc();
108 // object is at TOS
109 __ pop(c_rarg1);
111 // expression stack must be empty before entering the VM if an
112 // exception happened
113 __ empty_expression_stack();
115 __ call_VM(noreg,
116 CAST_FROM_FN_PTR(address,
117 InterpreterRuntime::
118 throw_ClassCastException),
119 c_rarg1);
120 return entry;
121 }
123 // Arguments are: required type at TOS+8, failing object (or NULL) at TOS+4.
124 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
125 address entry = __ pc();
127 __ pop(c_rarg2); // failing object is at TOS
128 __ pop(c_rarg1); // required type is at TOS+8
130 __ verify_oop(c_rarg1);
131 __ verify_oop(c_rarg2);
133 // Various method handle types use interpreter registers as temps.
134 __ restore_bcp();
135 __ restore_locals();
137 // Expression stack must be empty before entering the VM for an exception.
138 __ empty_expression_stack();
140 __ call_VM(noreg,
141 CAST_FROM_FN_PTR(address,
142 InterpreterRuntime::throw_WrongMethodTypeException),
143 // pass required type, failing object (or NULL)
144 c_rarg1, c_rarg2);
145 return entry;
146 }
148 address TemplateInterpreterGenerator::generate_exception_handler_common(
149 const char* name, const char* message, bool pass_oop) {
150 assert(!pass_oop || message == NULL, "either oop or message but not both");
151 address entry = __ pc();
152 if (pass_oop) {
153 // object is at TOS
154 __ pop(c_rarg2);
155 }
156 // expression stack must be empty before entering the VM if an
157 // exception happened
158 __ empty_expression_stack();
159 // setup parameters
160 __ lea(c_rarg1, ExternalAddress((address)name));
161 if (pass_oop) {
162 __ call_VM(rax, CAST_FROM_FN_PTR(address,
163 InterpreterRuntime::
164 create_klass_exception),
165 c_rarg1, c_rarg2);
166 } else {
167 // kind of lame ExternalAddress can't take NULL because
168 // external_word_Relocation will assert.
169 if (message != NULL) {
170 __ lea(c_rarg2, ExternalAddress((address)message));
171 } else {
172 __ movptr(c_rarg2, NULL_WORD);
173 }
174 __ call_VM(rax,
175 CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception),
176 c_rarg1, c_rarg2);
177 }
178 // throw exception
179 __ jump(ExternalAddress(Interpreter::throw_exception_entry()));
180 return entry;
181 }
184 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
185 address entry = __ pc();
186 // NULL last_sp until next java call
187 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
188 __ dispatch_next(state);
189 return entry;
190 }
193 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
194 address entry = __ pc();
196 // Restore stack bottom in case i2c adjusted stack
197 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
198 // and NULL it as marker that esp is now tos until next java call
199 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
201 __ restore_bcp();
202 __ restore_locals();
204 Label L_got_cache, L_giant_index;
205 if (EnableInvokeDynamic) {
206 __ cmpb(Address(r13, 0), Bytecodes::_invokedynamic);
207 __ jcc(Assembler::equal, L_giant_index);
208 }
209 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u2));
210 __ bind(L_got_cache);
211 __ movl(rbx, Address(rbx, rcx,
212 Address::times_ptr,
213 in_bytes(constantPoolCacheOopDesc::base_offset()) +
214 3 * wordSize));
215 __ andl(rbx, 0xFF);
216 __ lea(rsp, Address(rsp, rbx, Address::times_8));
217 __ dispatch_next(state, step);
219 // out of the main line of code...
220 if (EnableInvokeDynamic) {
221 __ bind(L_giant_index);
222 __ get_cache_and_index_at_bcp(rbx, rcx, 1, sizeof(u4));
223 __ jmp(L_got_cache);
224 }
226 return entry;
227 }
230 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state,
231 int step) {
232 address entry = __ pc();
233 // NULL last_sp until next java call
234 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
235 __ restore_bcp();
236 __ restore_locals();
237 // handle exceptions
238 {
239 Label L;
240 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
241 __ jcc(Assembler::zero, L);
242 __ call_VM(noreg,
243 CAST_FROM_FN_PTR(address,
244 InterpreterRuntime::throw_pending_exception));
245 __ should_not_reach_here();
246 __ bind(L);
247 }
248 __ dispatch_next(state, step);
249 return entry;
250 }
252 int AbstractInterpreter::BasicType_as_index(BasicType type) {
253 int i = 0;
254 switch (type) {
255 case T_BOOLEAN: i = 0; break;
256 case T_CHAR : i = 1; break;
257 case T_BYTE : i = 2; break;
258 case T_SHORT : i = 3; break;
259 case T_INT : i = 4; break;
260 case T_LONG : i = 5; break;
261 case T_VOID : i = 6; break;
262 case T_FLOAT : i = 7; break;
263 case T_DOUBLE : i = 8; break;
264 case T_OBJECT : i = 9; break;
265 case T_ARRAY : i = 9; break;
266 default : ShouldNotReachHere();
267 }
268 assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers,
269 "index out of bounds");
270 return i;
271 }
274 address TemplateInterpreterGenerator::generate_result_handler_for(
275 BasicType type) {
276 address entry = __ pc();
277 switch (type) {
278 case T_BOOLEAN: __ c2bool(rax); break;
279 case T_CHAR : __ movzwl(rax, rax); break;
280 case T_BYTE : __ sign_extend_byte(rax); break;
281 case T_SHORT : __ sign_extend_short(rax); break;
282 case T_INT : /* nothing to do */ break;
283 case T_LONG : /* nothing to do */ break;
284 case T_VOID : /* nothing to do */ break;
285 case T_FLOAT : /* nothing to do */ break;
286 case T_DOUBLE : /* nothing to do */ break;
287 case T_OBJECT :
288 // retrieve result from frame
289 __ movptr(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize));
290 // and verify it
291 __ verify_oop(rax);
292 break;
293 default : ShouldNotReachHere();
294 }
295 __ ret(0); // return from result handler
296 return entry;
297 }
299 address TemplateInterpreterGenerator::generate_safept_entry_for(
300 TosState state,
301 address runtime_entry) {
302 address entry = __ pc();
303 __ push(state);
304 __ call_VM(noreg, runtime_entry);
305 __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos));
306 return entry;
307 }
311 // Helpers for commoning out cases in the various type of method entries.
312 //
315 // increment invocation count & check for overflow
316 //
317 // Note: checking for negative value instead of overflow
318 // so we have a 'sticky' overflow test
319 //
320 // rbx: method
321 // ecx: invocation counter
322 //
323 void InterpreterGenerator::generate_counter_incr(
324 Label* overflow,
325 Label* profile_method,
326 Label* profile_method_continue) {
327 const Address invocation_counter(rbx, in_bytes(methodOopDesc::invocation_counter_offset()) +
328 in_bytes(InvocationCounter::counter_offset()));
329 // Note: In tiered we increment either counters in methodOop or in MDO depending if we're profiling or not.
330 if (TieredCompilation) {
331 int increment = InvocationCounter::count_increment;
332 int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift;
333 Label no_mdo, done;
334 if (ProfileInterpreter) {
335 // Are we profiling?
336 __ movptr(rax, Address(rbx, methodOopDesc::method_data_offset()));
337 __ testptr(rax, rax);
338 __ jccb(Assembler::zero, no_mdo);
339 // Increment counter in the MDO
340 const Address mdo_invocation_counter(rax, in_bytes(methodDataOopDesc::invocation_counter_offset()) +
341 in_bytes(InvocationCounter::counter_offset()));
342 __ increment_mask_and_jump(mdo_invocation_counter, increment, mask, rcx, false, Assembler::zero, overflow);
343 __ jmpb(done);
344 }
345 __ bind(no_mdo);
346 // Increment counter in methodOop (we don't need to load it, it's in ecx).
347 __ increment_mask_and_jump(invocation_counter, increment, mask, rcx, true, Assembler::zero, overflow);
348 __ bind(done);
349 } else {
350 const Address backedge_counter(rbx,
351 methodOopDesc::backedge_counter_offset() +
352 InvocationCounter::counter_offset());
354 if (ProfileInterpreter) { // %%% Merge this into methodDataOop
355 __ incrementl(Address(rbx,
356 methodOopDesc::interpreter_invocation_counter_offset()));
357 }
358 // Update standard invocation counters
359 __ movl(rax, backedge_counter); // load backedge counter
361 __ incrementl(rcx, InvocationCounter::count_increment);
362 __ andl(rax, InvocationCounter::count_mask_value); // mask out the status bits
364 __ movl(invocation_counter, rcx); // save invocation count
365 __ addl(rcx, rax); // add both counters
367 // profile_method is non-null only for interpreted method so
368 // profile_method != NULL == !native_call
370 if (ProfileInterpreter && profile_method != NULL) {
371 // Test to see if we should create a method data oop
372 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit));
373 __ jcc(Assembler::less, *profile_method_continue);
375 // if no method data exists, go to profile_method
376 __ test_method_data_pointer(rax, *profile_method);
377 }
379 __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit));
380 __ jcc(Assembler::aboveEqual, *overflow);
381 }
382 }
384 void InterpreterGenerator::generate_counter_overflow(Label* do_continue) {
386 // Asm interpreter on entry
387 // r14 - locals
388 // r13 - bcp
389 // rbx - method
390 // edx - cpool --- DOES NOT APPEAR TO BE TRUE
391 // rbp - interpreter frame
393 // On return (i.e. jump to entry_point) [ back to invocation of interpreter ]
394 // Everything as it was on entry
395 // rdx is not restored. Doesn't appear to really be set.
397 const Address size_of_parameters(rbx,
398 methodOopDesc::size_of_parameters_offset());
400 // InterpreterRuntime::frequency_counter_overflow takes two
401 // arguments, the first (thread) is passed by call_VM, the second
402 // indicates if the counter overflow occurs at a backwards branch
403 // (NULL bcp). We pass zero for it. The call returns the address
404 // of the verified entry point for the method or NULL if the
405 // compilation did not complete (either went background or bailed
406 // out).
407 __ movl(c_rarg1, 0);
408 __ call_VM(noreg,
409 CAST_FROM_FN_PTR(address,
410 InterpreterRuntime::frequency_counter_overflow),
411 c_rarg1);
413 __ movptr(rbx, Address(rbp, method_offset)); // restore methodOop
414 // Preserve invariant that r13/r14 contain bcp/locals of sender frame
415 // and jump to the interpreted entry.
416 __ jmp(*do_continue, relocInfo::none);
417 }
419 // See if we've got enough room on the stack for locals plus overhead.
420 // The expression stack grows down incrementally, so the normal guard
421 // page mechanism will work for that.
422 //
423 // NOTE: Since the additional locals are also always pushed (wasn't
424 // obvious in generate_method_entry) so the guard should work for them
425 // too.
426 //
427 // Args:
428 // rdx: number of additional locals this frame needs (what we must check)
429 // rbx: methodOop
430 //
431 // Kills:
432 // rax
433 void InterpreterGenerator::generate_stack_overflow_check(void) {
435 // monitor entry size: see picture of stack set
436 // (generate_method_entry) and frame_amd64.hpp
437 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
439 // total overhead size: entry_size + (saved rbp through expr stack
440 // bottom). be sure to change this if you add/subtract anything
441 // to/from the overhead area
442 const int overhead_size =
443 -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size;
445 const int page_size = os::vm_page_size();
447 Label after_frame_check;
449 // see if the frame is greater than one page in size. If so,
450 // then we need to verify there is enough stack space remaining
451 // for the additional locals.
452 __ cmpl(rdx, (page_size - overhead_size) / Interpreter::stackElementSize);
453 __ jcc(Assembler::belowEqual, after_frame_check);
455 // compute rsp as if this were going to be the last frame on
456 // the stack before the red zone
458 const Address stack_base(r15_thread, Thread::stack_base_offset());
459 const Address stack_size(r15_thread, Thread::stack_size_offset());
461 // locals + overhead, in bytes
462 __ mov(rax, rdx);
463 __ shlptr(rax, Interpreter::logStackElementSize); // 2 slots per parameter.
464 __ addptr(rax, overhead_size);
466 #ifdef ASSERT
467 Label stack_base_okay, stack_size_okay;
468 // verify that thread stack base is non-zero
469 __ cmpptr(stack_base, (int32_t)NULL_WORD);
470 __ jcc(Assembler::notEqual, stack_base_okay);
471 __ stop("stack base is zero");
472 __ bind(stack_base_okay);
473 // verify that thread stack size is non-zero
474 __ cmpptr(stack_size, 0);
475 __ jcc(Assembler::notEqual, stack_size_okay);
476 __ stop("stack size is zero");
477 __ bind(stack_size_okay);
478 #endif
480 // Add stack base to locals and subtract stack size
481 __ addptr(rax, stack_base);
482 __ subptr(rax, stack_size);
484 // Use the maximum number of pages we might bang.
485 const int max_pages = StackShadowPages > (StackRedPages+StackYellowPages) ? StackShadowPages :
486 (StackRedPages+StackYellowPages);
488 // add in the red and yellow zone sizes
489 __ addptr(rax, max_pages * page_size);
491 // check against the current stack bottom
492 __ cmpptr(rsp, rax);
493 __ jcc(Assembler::above, after_frame_check);
495 __ pop(rax); // get return address
496 __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry()));
498 // all done with frame size check
499 __ bind(after_frame_check);
500 }
502 // Allocate monitor and lock method (asm interpreter)
503 //
504 // Args:
505 // rbx: methodOop
506 // r14: locals
507 //
508 // Kills:
509 // rax
510 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs)
511 // rscratch1, rscratch2 (scratch regs)
512 void InterpreterGenerator::lock_method(void) {
513 // synchronize method
514 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
515 const Address monitor_block_top(
516 rbp,
517 frame::interpreter_frame_monitor_block_top_offset * wordSize);
518 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize;
520 #ifdef ASSERT
521 {
522 Label L;
523 __ movl(rax, access_flags);
524 __ testl(rax, JVM_ACC_SYNCHRONIZED);
525 __ jcc(Assembler::notZero, L);
526 __ stop("method doesn't need synchronization");
527 __ bind(L);
528 }
529 #endif // ASSERT
531 // get synchronization object
532 {
533 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
534 Klass::java_mirror_offset_in_bytes();
535 Label done;
536 __ movl(rax, access_flags);
537 __ testl(rax, JVM_ACC_STATIC);
538 // get receiver (assume this is frequent case)
539 __ movptr(rax, Address(r14, Interpreter::local_offset_in_bytes(0)));
540 __ jcc(Assembler::zero, done);
541 __ movptr(rax, Address(rbx, methodOopDesc::constants_offset()));
542 __ movptr(rax, Address(rax,
543 constantPoolOopDesc::pool_holder_offset_in_bytes()));
544 __ movptr(rax, Address(rax, mirror_offset));
546 #ifdef ASSERT
547 {
548 Label L;
549 __ testptr(rax, rax);
550 __ jcc(Assembler::notZero, L);
551 __ stop("synchronization object is NULL");
552 __ bind(L);
553 }
554 #endif // ASSERT
556 __ bind(done);
557 }
559 // add space for monitor & lock
560 __ subptr(rsp, entry_size); // add space for a monitor entry
561 __ movptr(monitor_block_top, rsp); // set new monitor block top
562 // store object
563 __ movptr(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax);
564 __ movptr(c_rarg1, rsp); // object address
565 __ lock_object(c_rarg1);
566 }
568 // Generate a fixed interpreter frame. This is identical setup for
569 // interpreted methods and for native methods hence the shared code.
570 //
571 // Args:
572 // rax: return address
573 // rbx: methodOop
574 // r14: pointer to locals
575 // r13: sender sp
576 // rdx: cp cache
577 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
578 // initialize fixed part of activation frame
579 __ push(rax); // save return address
580 __ enter(); // save old & set new rbp
581 __ push(r13); // set sender sp
582 __ push((int)NULL_WORD); // leave last_sp as null
583 __ movptr(r13, Address(rbx, methodOopDesc::const_offset())); // get constMethodOop
584 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
585 __ push(rbx); // save methodOop
586 if (ProfileInterpreter) {
587 Label method_data_continue;
588 __ movptr(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset())));
589 __ testptr(rdx, rdx);
590 __ jcc(Assembler::zero, method_data_continue);
591 __ addptr(rdx, in_bytes(methodDataOopDesc::data_offset()));
592 __ bind(method_data_continue);
593 __ push(rdx); // set the mdp (method data pointer)
594 } else {
595 __ push(0);
596 }
598 __ movptr(rdx, Address(rbx, methodOopDesc::constants_offset()));
599 __ movptr(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes()));
600 __ push(rdx); // set constant pool cache
601 __ push(r14); // set locals pointer
602 if (native_call) {
603 __ push(0); // no bcp
604 } else {
605 __ push(r13); // set bcp
606 }
607 __ push(0); // reserve word for pointer to expression stack bottom
608 __ movptr(Address(rsp, 0), rsp); // set expression stack bottom
609 }
611 // End of helpers
613 // Various method entries
614 //------------------------------------------------------------------------------------------------------------------------
615 //
616 //
618 // Call an accessor method (assuming it is resolved, otherwise drop
619 // into vanilla (slow path) entry
620 address InterpreterGenerator::generate_accessor_entry(void) {
621 // rbx: methodOop
623 // r13: senderSP must preserver for slow path, set SP to it on fast path
625 address entry_point = __ pc();
626 Label xreturn_path;
628 // do fastpath for resolved accessor methods
629 if (UseFastAccessorMethods) {
630 // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites
631 // thereof; parameter size = 1
632 // Note: We can only use this code if the getfield has been resolved
633 // and if we don't have a null-pointer exception => check for
634 // these conditions first and use slow path if necessary.
635 Label slow_path;
636 // If we need a safepoint check, generate full interpreter entry.
637 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
638 SafepointSynchronize::_not_synchronized);
640 __ jcc(Assembler::notEqual, slow_path);
641 // rbx: method
642 __ movptr(rax, Address(rsp, wordSize));
644 // check if local 0 != NULL and read field
645 __ testptr(rax, rax);
646 __ jcc(Assembler::zero, slow_path);
648 __ movptr(rdi, Address(rbx, methodOopDesc::constants_offset()));
649 // read first instruction word and extract bytecode @ 1 and index @ 2
650 __ movptr(rdx, Address(rbx, methodOopDesc::const_offset()));
651 __ movl(rdx, Address(rdx, constMethodOopDesc::codes_offset()));
652 // Shift codes right to get the index on the right.
653 // The bytecode fetched looks like <index><0xb4><0x2a>
654 __ shrl(rdx, 2 * BitsPerByte);
655 __ shll(rdx, exact_log2(in_words(ConstantPoolCacheEntry::size())));
656 __ movptr(rdi, Address(rdi, constantPoolOopDesc::cache_offset_in_bytes()));
658 // rax: local 0
659 // rbx: method
660 // rdx: constant pool cache index
661 // rdi: constant pool cache
663 // check if getfield has been resolved and read constant pool cache entry
664 // check the validity of the cache entry by testing whether _indices field
665 // contains Bytecode::_getfield in b1 byte.
666 assert(in_words(ConstantPoolCacheEntry::size()) == 4,
667 "adjust shift below");
668 __ movl(rcx,
669 Address(rdi,
670 rdx,
671 Address::times_8,
672 constantPoolCacheOopDesc::base_offset() +
673 ConstantPoolCacheEntry::indices_offset()));
674 __ shrl(rcx, 2 * BitsPerByte);
675 __ andl(rcx, 0xFF);
676 __ cmpl(rcx, Bytecodes::_getfield);
677 __ jcc(Assembler::notEqual, slow_path);
679 // Note: constant pool entry is not valid before bytecode is resolved
680 __ movptr(rcx,
681 Address(rdi,
682 rdx,
683 Address::times_8,
684 constantPoolCacheOopDesc::base_offset() +
685 ConstantPoolCacheEntry::f2_offset()));
686 // edx: flags
687 __ movl(rdx,
688 Address(rdi,
689 rdx,
690 Address::times_8,
691 constantPoolCacheOopDesc::base_offset() +
692 ConstantPoolCacheEntry::flags_offset()));
694 Label notObj, notInt, notByte, notShort;
695 const Address field_address(rax, rcx, Address::times_1);
697 // Need to differentiate between igetfield, agetfield, bgetfield etc.
698 // because they are different sizes.
699 // Use the type from the constant pool cache
700 __ shrl(rdx, ConstantPoolCacheEntry::tosBits);
701 // Make sure we don't need to mask edx for tosBits after the above shift
702 ConstantPoolCacheEntry::verify_tosBits();
704 __ cmpl(rdx, atos);
705 __ jcc(Assembler::notEqual, notObj);
706 // atos
707 __ load_heap_oop(rax, field_address);
708 __ jmp(xreturn_path);
710 __ bind(notObj);
711 __ cmpl(rdx, itos);
712 __ jcc(Assembler::notEqual, notInt);
713 // itos
714 __ movl(rax, field_address);
715 __ jmp(xreturn_path);
717 __ bind(notInt);
718 __ cmpl(rdx, btos);
719 __ jcc(Assembler::notEqual, notByte);
720 // btos
721 __ load_signed_byte(rax, field_address);
722 __ jmp(xreturn_path);
724 __ bind(notByte);
725 __ cmpl(rdx, stos);
726 __ jcc(Assembler::notEqual, notShort);
727 // stos
728 __ load_signed_short(rax, field_address);
729 __ jmp(xreturn_path);
731 __ bind(notShort);
732 #ifdef ASSERT
733 Label okay;
734 __ cmpl(rdx, ctos);
735 __ jcc(Assembler::equal, okay);
736 __ stop("what type is this?");
737 __ bind(okay);
738 #endif
739 // ctos
740 __ load_unsigned_short(rax, field_address);
742 __ bind(xreturn_path);
744 // _ireturn/_areturn
745 __ pop(rdi);
746 __ mov(rsp, r13);
747 __ jmp(rdi);
748 __ ret(0);
750 // generate a vanilla interpreter entry as the slow path
751 __ bind(slow_path);
752 (void) generate_normal_entry(false);
753 } else {
754 (void) generate_normal_entry(false);
755 }
757 return entry_point;
758 }
760 // Interpreter stub for calling a native method. (asm interpreter)
761 // This sets up a somewhat different looking stack for calling the
762 // native method than the typical interpreter frame setup.
763 address InterpreterGenerator::generate_native_entry(bool synchronized) {
764 // determine code generation flags
765 bool inc_counter = UseCompiler || CountCompiledCalls;
767 // rbx: methodOop
768 // r13: sender sp
770 address entry_point = __ pc();
772 const Address size_of_parameters(rbx, methodOopDesc::
773 size_of_parameters_offset());
774 const Address invocation_counter(rbx, methodOopDesc::
775 invocation_counter_offset() +
776 InvocationCounter::counter_offset());
777 const Address access_flags (rbx, methodOopDesc::access_flags_offset());
779 // get parameter size (always needed)
780 __ load_unsigned_short(rcx, size_of_parameters);
782 // native calls don't need the stack size check since they have no
783 // expression stack and the arguments are already on the stack and
784 // we only add a handful of words to the stack
786 // rbx: methodOop
787 // rcx: size of parameters
788 // r13: sender sp
789 __ pop(rax); // get return address
791 // for natives the size of locals is zero
793 // compute beginning of parameters (r14)
794 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
796 // add 2 zero-initialized slots for native calls
797 // initialize result_handler slot
798 __ push((int) NULL_WORD);
799 // slot for oop temp
800 // (static native method holder mirror/jni oop result)
801 __ push((int) NULL_WORD);
803 if (inc_counter) {
804 __ movl(rcx, invocation_counter); // (pre-)fetch invocation count
805 }
807 // initialize fixed part of activation frame
808 generate_fixed_frame(true);
810 // make sure method is native & not abstract
811 #ifdef ASSERT
812 __ movl(rax, access_flags);
813 {
814 Label L;
815 __ testl(rax, JVM_ACC_NATIVE);
816 __ jcc(Assembler::notZero, L);
817 __ stop("tried to execute non-native method as native");
818 __ bind(L);
819 }
820 {
821 Label L;
822 __ testl(rax, JVM_ACC_ABSTRACT);
823 __ jcc(Assembler::zero, L);
824 __ stop("tried to execute abstract method in interpreter");
825 __ bind(L);
826 }
827 #endif
829 // Since at this point in the method invocation the exception handler
830 // would try to exit the monitor of synchronized methods which hasn't
831 // been entered yet, we set the thread local variable
832 // _do_not_unlock_if_synchronized to true. The remove_activation will
833 // check this flag.
835 const Address do_not_unlock_if_synchronized(r15_thread,
836 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
837 __ movbool(do_not_unlock_if_synchronized, true);
839 // increment invocation count & check for overflow
840 Label invocation_counter_overflow;
841 if (inc_counter) {
842 generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
843 }
845 Label continue_after_compile;
846 __ bind(continue_after_compile);
848 bang_stack_shadow_pages(true);
850 // reset the _do_not_unlock_if_synchronized flag
851 __ movbool(do_not_unlock_if_synchronized, false);
853 // check for synchronized methods
854 // Must happen AFTER invocation_counter check and stack overflow check,
855 // so method is not locked if overflows.
856 if (synchronized) {
857 lock_method();
858 } else {
859 // no synchronization necessary
860 #ifdef ASSERT
861 {
862 Label L;
863 __ movl(rax, access_flags);
864 __ testl(rax, JVM_ACC_SYNCHRONIZED);
865 __ jcc(Assembler::zero, L);
866 __ stop("method needs synchronization");
867 __ bind(L);
868 }
869 #endif
870 }
872 // start execution
873 #ifdef ASSERT
874 {
875 Label L;
876 const Address monitor_block_top(rbp,
877 frame::interpreter_frame_monitor_block_top_offset * wordSize);
878 __ movptr(rax, monitor_block_top);
879 __ cmpptr(rax, rsp);
880 __ jcc(Assembler::equal, L);
881 __ stop("broken stack frame setup in interpreter");
882 __ bind(L);
883 }
884 #endif
886 // jvmti support
887 __ notify_method_entry();
889 // work registers
890 const Register method = rbx;
891 const Register t = r11;
893 // allocate space for parameters
894 __ get_method(method);
895 __ verify_oop(method);
896 __ load_unsigned_short(t,
897 Address(method,
898 methodOopDesc::size_of_parameters_offset()));
899 __ shll(t, Interpreter::logStackElementSize);
901 __ subptr(rsp, t);
902 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
903 __ andptr(rsp, -16); // must be 16 byte boundary (see amd64 ABI)
905 // get signature handler
906 {
907 Label L;
908 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
909 __ testptr(t, t);
910 __ jcc(Assembler::notZero, L);
911 __ call_VM(noreg,
912 CAST_FROM_FN_PTR(address,
913 InterpreterRuntime::prepare_native_call),
914 method);
915 __ get_method(method);
916 __ movptr(t, Address(method, methodOopDesc::signature_handler_offset()));
917 __ bind(L);
918 }
920 // call signature handler
921 assert(InterpreterRuntime::SignatureHandlerGenerator::from() == r14,
922 "adjust this code");
923 assert(InterpreterRuntime::SignatureHandlerGenerator::to() == rsp,
924 "adjust this code");
925 assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == rscratch1,
926 "adjust this code");
928 // The generated handlers do not touch RBX (the method oop).
929 // However, large signatures cannot be cached and are generated
930 // each time here. The slow-path generator can do a GC on return,
931 // so we must reload it after the call.
932 __ call(t);
933 __ get_method(method); // slow path can do a GC, reload RBX
936 // result handler is in rax
937 // set result handler
938 __ movptr(Address(rbp,
939 (frame::interpreter_frame_result_handler_offset) * wordSize),
940 rax);
942 // pass mirror handle if static call
943 {
944 Label L;
945 const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() +
946 Klass::java_mirror_offset_in_bytes();
947 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
948 __ testl(t, JVM_ACC_STATIC);
949 __ jcc(Assembler::zero, L);
950 // get mirror
951 __ movptr(t, Address(method, methodOopDesc::constants_offset()));
952 __ movptr(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes()));
953 __ movptr(t, Address(t, mirror_offset));
954 // copy mirror into activation frame
955 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize),
956 t);
957 // pass handle to mirror
958 __ lea(c_rarg1,
959 Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize));
960 __ bind(L);
961 }
963 // get native function entry point
964 {
965 Label L;
966 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
967 ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry());
968 __ movptr(rscratch2, unsatisfied.addr());
969 __ cmpptr(rax, rscratch2);
970 __ jcc(Assembler::notEqual, L);
971 __ call_VM(noreg,
972 CAST_FROM_FN_PTR(address,
973 InterpreterRuntime::prepare_native_call),
974 method);
975 __ get_method(method);
976 __ verify_oop(method);
977 __ movptr(rax, Address(method, methodOopDesc::native_function_offset()));
978 __ bind(L);
979 }
981 // pass JNIEnv
982 __ lea(c_rarg0, Address(r15_thread, JavaThread::jni_environment_offset()));
984 // It is enough that the pc() points into the right code
985 // segment. It does not have to be the correct return pc.
986 __ set_last_Java_frame(rsp, rbp, (address) __ pc());
988 // change thread state
989 #ifdef ASSERT
990 {
991 Label L;
992 __ movl(t, Address(r15_thread, JavaThread::thread_state_offset()));
993 __ cmpl(t, _thread_in_Java);
994 __ jcc(Assembler::equal, L);
995 __ stop("Wrong thread state in native stub");
996 __ bind(L);
997 }
998 #endif
1000 // Change state to native
1002 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1003 _thread_in_native);
1005 // Call the native method.
1006 __ call(rax);
1007 // result potentially in rax or xmm0
1009 // Depending on runtime options, either restore the MXCSR
1010 // register after returning from the JNI Call or verify that
1011 // it wasn't changed during -Xcheck:jni.
1012 if (RestoreMXCSROnJNICalls) {
1013 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
1014 }
1015 else if (CheckJNICalls) {
1016 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::x86::verify_mxcsr_entry())));
1017 }
1019 // NOTE: The order of these pushes is known to frame::interpreter_frame_result
1020 // in order to extract the result of a method call. If the order of these
1021 // pushes change or anything else is added to the stack then the code in
1022 // interpreter_frame_result must also change.
1024 __ push(dtos);
1025 __ push(ltos);
1027 // change thread state
1028 __ movl(Address(r15_thread, JavaThread::thread_state_offset()),
1029 _thread_in_native_trans);
1031 if (os::is_MP()) {
1032 if (UseMembar) {
1033 // Force this write out before the read below
1034 __ membar(Assembler::Membar_mask_bits(
1035 Assembler::LoadLoad | Assembler::LoadStore |
1036 Assembler::StoreLoad | Assembler::StoreStore));
1037 } else {
1038 // Write serialization page so VM thread can do a pseudo remote membar.
1039 // We use the current thread pointer to calculate a thread specific
1040 // offset to write to within the page. This minimizes bus traffic
1041 // due to cache line collision.
1042 __ serialize_memory(r15_thread, rscratch2);
1043 }
1044 }
1046 // check for safepoint operation in progress and/or pending suspend requests
1047 {
1048 Label Continue;
1049 __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()),
1050 SafepointSynchronize::_not_synchronized);
1052 Label L;
1053 __ jcc(Assembler::notEqual, L);
1054 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
1055 __ jcc(Assembler::equal, Continue);
1056 __ bind(L);
1058 // Don't use call_VM as it will see a possible pending exception
1059 // and forward it and never return here preventing us from
1060 // clearing _last_native_pc down below. Also can't use
1061 // call_VM_leaf either as it will check to see if r13 & r14 are
1062 // preserved and correspond to the bcp/locals pointers. So we do a
1063 // runtime call by hand.
1064 //
1065 __ mov(c_rarg0, r15_thread);
1066 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1067 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1068 __ andptr(rsp, -16); // align stack as required by ABI
1069 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
1070 __ mov(rsp, r12); // restore sp
1071 __ reinit_heapbase();
1072 __ bind(Continue);
1073 }
1075 // change thread state
1076 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
1078 // reset_last_Java_frame
1079 __ reset_last_Java_frame(true, true);
1081 // reset handle block
1082 __ movptr(t, Address(r15_thread, JavaThread::active_handles_offset()));
1083 __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
1085 // If result is an oop unbox and store it in frame where gc will see it
1086 // and result handler will pick it up
1088 {
1089 Label no_oop, store_result;
1090 __ lea(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT)));
1091 __ cmpptr(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize));
1092 __ jcc(Assembler::notEqual, no_oop);
1093 // retrieve result
1094 __ pop(ltos);
1095 __ testptr(rax, rax);
1096 __ jcc(Assembler::zero, store_result);
1097 __ movptr(rax, Address(rax, 0));
1098 __ bind(store_result);
1099 __ movptr(Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize), rax);
1100 // keep stack depth as expected by pushing oop which will eventually be discarde
1101 __ push(ltos);
1102 __ bind(no_oop);
1103 }
1106 {
1107 Label no_reguard;
1108 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()),
1109 JavaThread::stack_guard_yellow_disabled);
1110 __ jcc(Assembler::notEqual, no_reguard);
1112 __ pusha(); // XXX only save smashed registers
1113 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1114 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1115 __ andptr(rsp, -16); // align stack as required by ABI
1116 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
1117 __ mov(rsp, r12); // restore sp
1118 __ popa(); // XXX only restore smashed registers
1119 __ reinit_heapbase();
1121 __ bind(no_reguard);
1122 }
1125 // The method register is junk from after the thread_in_native transition
1126 // until here. Also can't call_VM until the bcp has been
1127 // restored. Need bcp for throwing exception below so get it now.
1128 __ get_method(method);
1129 __ verify_oop(method);
1131 // restore r13 to have legal interpreter frame, i.e., bci == 0 <=>
1132 // r13 == code_base()
1133 __ movptr(r13, Address(method, methodOopDesc::const_offset())); // get constMethodOop
1134 __ lea(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase
1135 // handle exceptions (exception handling will handle unlocking!)
1136 {
1137 Label L;
1138 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL_WORD);
1139 __ jcc(Assembler::zero, L);
1140 // Note: At some point we may want to unify this with the code
1141 // used in call_VM_base(); i.e., we should use the
1142 // StubRoutines::forward_exception code. For now this doesn't work
1143 // here because the rsp is not correctly set at this point.
1144 __ MacroAssembler::call_VM(noreg,
1145 CAST_FROM_FN_PTR(address,
1146 InterpreterRuntime::throw_pending_exception));
1147 __ should_not_reach_here();
1148 __ bind(L);
1149 }
1151 // do unlocking if necessary
1152 {
1153 Label L;
1154 __ movl(t, Address(method, methodOopDesc::access_flags_offset()));
1155 __ testl(t, JVM_ACC_SYNCHRONIZED);
1156 __ jcc(Assembler::zero, L);
1157 // the code below should be shared with interpreter macro
1158 // assembler implementation
1159 {
1160 Label unlock;
1161 // BasicObjectLock will be first in list, since this is a
1162 // synchronized method. However, need to check that the object
1163 // has not been unlocked by an explicit monitorexit bytecode.
1164 const Address monitor(rbp,
1165 (intptr_t)(frame::interpreter_frame_initial_sp_offset *
1166 wordSize - sizeof(BasicObjectLock)));
1168 // monitor expect in c_rarg1 for slow unlock path
1169 __ lea(c_rarg1, monitor); // address of first monitor
1171 __ movptr(t, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes()));
1172 __ testptr(t, t);
1173 __ jcc(Assembler::notZero, unlock);
1175 // Entry already unlocked, need to throw exception
1176 __ MacroAssembler::call_VM(noreg,
1177 CAST_FROM_FN_PTR(address,
1178 InterpreterRuntime::throw_illegal_monitor_state_exception));
1179 __ should_not_reach_here();
1181 __ bind(unlock);
1182 __ unlock_object(c_rarg1);
1183 }
1184 __ bind(L);
1185 }
1187 // jvmti support
1188 // Note: This must happen _after_ handling/throwing any exceptions since
1189 // the exception handler code notifies the runtime of method exits
1190 // too. If this happens before, method entry/exit notifications are
1191 // not properly paired (was bug - gri 11/22/99).
1192 __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI);
1194 // restore potential result in edx:eax, call result handler to
1195 // restore potential result in ST0 & handle result
1197 __ pop(ltos);
1198 __ pop(dtos);
1200 __ movptr(t, Address(rbp,
1201 (frame::interpreter_frame_result_handler_offset) * wordSize));
1202 __ call(t);
1204 // remove activation
1205 __ movptr(t, Address(rbp,
1206 frame::interpreter_frame_sender_sp_offset *
1207 wordSize)); // get sender sp
1208 __ leave(); // remove frame anchor
1209 __ pop(rdi); // get return address
1210 __ mov(rsp, t); // set sp to sender sp
1211 __ jmp(rdi);
1213 if (inc_counter) {
1214 // Handle overflow of counter and compile method
1215 __ bind(invocation_counter_overflow);
1216 generate_counter_overflow(&continue_after_compile);
1217 }
1219 return entry_point;
1220 }
1222 //
1223 // Generic interpreted method entry to (asm) interpreter
1224 //
1225 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
1226 // determine code generation flags
1227 bool inc_counter = UseCompiler || CountCompiledCalls;
1229 // ebx: methodOop
1230 // r13: sender sp
1231 address entry_point = __ pc();
1233 const Address size_of_parameters(rbx,
1234 methodOopDesc::size_of_parameters_offset());
1235 const Address size_of_locals(rbx, methodOopDesc::size_of_locals_offset());
1236 const Address invocation_counter(rbx,
1237 methodOopDesc::invocation_counter_offset() +
1238 InvocationCounter::counter_offset());
1239 const Address access_flags(rbx, methodOopDesc::access_flags_offset());
1241 // get parameter size (always needed)
1242 __ load_unsigned_short(rcx, size_of_parameters);
1244 // rbx: methodOop
1245 // rcx: size of parameters
1246 // r13: sender_sp (could differ from sp+wordSize if we were called via c2i )
1248 __ load_unsigned_short(rdx, size_of_locals); // get size of locals in words
1249 __ subl(rdx, rcx); // rdx = no. of additional locals
1251 // YYY
1252 // __ incrementl(rdx);
1253 // __ andl(rdx, -2);
1255 // see if we've got enough room on the stack for locals plus overhead.
1256 generate_stack_overflow_check();
1258 // get return address
1259 __ pop(rax);
1261 // compute beginning of parameters (r14)
1262 __ lea(r14, Address(rsp, rcx, Address::times_8, -wordSize));
1264 // rdx - # of additional locals
1265 // allocate space for locals
1266 // explicitly initialize locals
1267 {
1268 Label exit, loop;
1269 __ testl(rdx, rdx);
1270 __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0
1271 __ bind(loop);
1272 __ push((int) NULL_WORD); // initialize local variables
1273 __ decrementl(rdx); // until everything initialized
1274 __ jcc(Assembler::greater, loop);
1275 __ bind(exit);
1276 }
1278 // (pre-)fetch invocation count
1279 if (inc_counter) {
1280 __ movl(rcx, invocation_counter);
1281 }
1282 // initialize fixed part of activation frame
1283 generate_fixed_frame(false);
1285 // make sure method is not native & not abstract
1286 #ifdef ASSERT
1287 __ movl(rax, access_flags);
1288 {
1289 Label L;
1290 __ testl(rax, JVM_ACC_NATIVE);
1291 __ jcc(Assembler::zero, L);
1292 __ stop("tried to execute native method as non-native");
1293 __ bind(L);
1294 }
1295 {
1296 Label L;
1297 __ testl(rax, JVM_ACC_ABSTRACT);
1298 __ jcc(Assembler::zero, L);
1299 __ stop("tried to execute abstract method in interpreter");
1300 __ bind(L);
1301 }
1302 #endif
1304 // Since at this point in the method invocation the exception
1305 // handler would try to exit the monitor of synchronized methods
1306 // which hasn't been entered yet, we set the thread local variable
1307 // _do_not_unlock_if_synchronized to true. The remove_activation
1308 // will check this flag.
1310 const Address do_not_unlock_if_synchronized(r15_thread,
1311 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset()));
1312 __ movbool(do_not_unlock_if_synchronized, true);
1314 // increment invocation count & check for overflow
1315 Label invocation_counter_overflow;
1316 Label profile_method;
1317 Label profile_method_continue;
1318 if (inc_counter) {
1319 generate_counter_incr(&invocation_counter_overflow,
1320 &profile_method,
1321 &profile_method_continue);
1322 if (ProfileInterpreter) {
1323 __ bind(profile_method_continue);
1324 }
1325 }
1327 Label continue_after_compile;
1328 __ bind(continue_after_compile);
1330 // check for synchronized interpreted methods
1331 bang_stack_shadow_pages(false);
1333 // reset the _do_not_unlock_if_synchronized flag
1334 __ movbool(do_not_unlock_if_synchronized, false);
1336 // check for synchronized methods
1337 // Must happen AFTER invocation_counter check and stack overflow check,
1338 // so method is not locked if overflows.
1339 if (synchronized) {
1340 // Allocate monitor and lock method
1341 lock_method();
1342 } else {
1343 // no synchronization necessary
1344 #ifdef ASSERT
1345 {
1346 Label L;
1347 __ movl(rax, access_flags);
1348 __ testl(rax, JVM_ACC_SYNCHRONIZED);
1349 __ jcc(Assembler::zero, L);
1350 __ stop("method needs synchronization");
1351 __ bind(L);
1352 }
1353 #endif
1354 }
1356 // start execution
1357 #ifdef ASSERT
1358 {
1359 Label L;
1360 const Address monitor_block_top (rbp,
1361 frame::interpreter_frame_monitor_block_top_offset * wordSize);
1362 __ movptr(rax, monitor_block_top);
1363 __ cmpptr(rax, rsp);
1364 __ jcc(Assembler::equal, L);
1365 __ stop("broken stack frame setup in interpreter");
1366 __ bind(L);
1367 }
1368 #endif
1370 // jvmti support
1371 __ notify_method_entry();
1373 __ dispatch_next(vtos);
1375 // invocation counter overflow
1376 if (inc_counter) {
1377 if (ProfileInterpreter) {
1378 // We have decided to profile this method in the interpreter
1379 __ bind(profile_method);
1380 __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method));
1381 __ set_method_data_pointer_for_bcp();
1382 __ get_method(rbx);
1383 __ jmp(profile_method_continue);
1384 }
1385 // Handle overflow of counter and compile method
1386 __ bind(invocation_counter_overflow);
1387 generate_counter_overflow(&continue_after_compile);
1388 }
1390 return entry_point;
1391 }
1393 // Entry points
1394 //
1395 // Here we generate the various kind of entries into the interpreter.
1396 // The two main entry type are generic bytecode methods and native
1397 // call method. These both come in synchronized and non-synchronized
1398 // versions but the frame layout they create is very similar. The
1399 // other method entry types are really just special purpose entries
1400 // that are really entry and interpretation all in one. These are for
1401 // trivial methods like accessor, empty, or special math methods.
1402 //
1403 // When control flow reaches any of the entry types for the interpreter
1404 // the following holds ->
1405 //
1406 // Arguments:
1407 //
1408 // rbx: methodOop
1409 //
1410 // Stack layout immediately at entry
1411 //
1412 // [ return address ] <--- rsp
1413 // [ parameter n ]
1414 // ...
1415 // [ parameter 1 ]
1416 // [ expression stack ] (caller's java expression stack)
1418 // Assuming that we don't go to one of the trivial specialized entries
1419 // the stack will look like below when we are ready to execute the
1420 // first bytecode (or call the native routine). The register usage
1421 // will be as the template based interpreter expects (see
1422 // interpreter_amd64.hpp).
1423 //
1424 // local variables follow incoming parameters immediately; i.e.
1425 // the return address is moved to the end of the locals).
1426 //
1427 // [ monitor entry ] <--- rsp
1428 // ...
1429 // [ monitor entry ]
1430 // [ expr. stack bottom ]
1431 // [ saved r13 ]
1432 // [ current r14 ]
1433 // [ methodOop ]
1434 // [ saved ebp ] <--- rbp
1435 // [ return address ]
1436 // [ local variable m ]
1437 // ...
1438 // [ local variable 1 ]
1439 // [ parameter n ]
1440 // ...
1441 // [ parameter 1 ] <--- r14
1443 address AbstractInterpreterGenerator::generate_method_entry(
1444 AbstractInterpreter::MethodKind kind) {
1445 // determine code generation flags
1446 bool synchronized = false;
1447 address entry_point = NULL;
1449 switch (kind) {
1450 case Interpreter::zerolocals : break;
1451 case Interpreter::zerolocals_synchronized: synchronized = true; break;
1452 case Interpreter::native : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(false); break;
1453 case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(true); break;
1454 case Interpreter::empty : entry_point = ((InterpreterGenerator*) this)->generate_empty_entry(); break;
1455 case Interpreter::accessor : entry_point = ((InterpreterGenerator*) this)->generate_accessor_entry(); break;
1456 case Interpreter::abstract : entry_point = ((InterpreterGenerator*) this)->generate_abstract_entry(); break;
1457 case Interpreter::method_handle : entry_point = ((InterpreterGenerator*) this)->generate_method_handle_entry();break;
1459 case Interpreter::java_lang_math_sin : // fall thru
1460 case Interpreter::java_lang_math_cos : // fall thru
1461 case Interpreter::java_lang_math_tan : // fall thru
1462 case Interpreter::java_lang_math_abs : // fall thru
1463 case Interpreter::java_lang_math_log : // fall thru
1464 case Interpreter::java_lang_math_log10 : // fall thru
1465 case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*) this)->generate_math_entry(kind); break;
1466 default : ShouldNotReachHere(); break;
1467 }
1469 if (entry_point) {
1470 return entry_point;
1471 }
1473 return ((InterpreterGenerator*) this)->
1474 generate_normal_entry(synchronized);
1475 }
1477 // These should never be compiled since the interpreter will prefer
1478 // the compiled version to the intrinsic version.
1479 bool AbstractInterpreter::can_be_compiled(methodHandle m) {
1480 switch (method_kind(m)) {
1481 case Interpreter::java_lang_math_sin : // fall thru
1482 case Interpreter::java_lang_math_cos : // fall thru
1483 case Interpreter::java_lang_math_tan : // fall thru
1484 case Interpreter::java_lang_math_abs : // fall thru
1485 case Interpreter::java_lang_math_log : // fall thru
1486 case Interpreter::java_lang_math_log10 : // fall thru
1487 case Interpreter::java_lang_math_sqrt :
1488 return false;
1489 default:
1490 return true;
1491 }
1492 }
1494 // How much stack a method activation needs in words.
1495 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
1496 const int entry_size = frame::interpreter_frame_monitor_size();
1498 // total overhead size: entry_size + (saved rbp thru expr stack
1499 // bottom). be sure to change this if you add/subtract anything
1500 // to/from the overhead area
1501 const int overhead_size =
1502 -(frame::interpreter_frame_initial_sp_offset) + entry_size;
1504 const int stub_code = frame::entry_frame_after_call_words;
1505 const int extra_stack = methodOopDesc::extra_stack_entries();
1506 const int method_stack = (method->max_locals() + method->max_stack() + extra_stack) *
1507 Interpreter::stackElementWords;
1508 return (overhead_size + method_stack + stub_code);
1509 }
1511 int AbstractInterpreter::layout_activation(methodOop method,
1512 int tempcount,
1513 int popframe_extra_args,
1514 int moncount,
1515 int callee_param_count,
1516 int callee_locals,
1517 frame* caller,
1518 frame* interpreter_frame,
1519 bool is_top_frame) {
1520 // Note: This calculation must exactly parallel the frame setup
1521 // in AbstractInterpreterGenerator::generate_method_entry.
1522 // If interpreter_frame!=NULL, set up the method, locals, and monitors.
1523 // The frame interpreter_frame, if not NULL, is guaranteed to be the
1524 // right size, as determined by a previous call to this method.
1525 // It is also guaranteed to be walkable even though it is in a skeletal state
1527 // fixed size of an interpreter frame:
1528 int max_locals = method->max_locals() * Interpreter::stackElementWords;
1529 int extra_locals = (method->max_locals() - method->size_of_parameters()) *
1530 Interpreter::stackElementWords;
1532 int overhead = frame::sender_sp_offset -
1533 frame::interpreter_frame_initial_sp_offset;
1534 // Our locals were accounted for by the caller (or last_frame_adjust
1535 // on the transistion) Since the callee parameters already account
1536 // for the callee's params we only need to account for the extra
1537 // locals.
1538 int size = overhead +
1539 (callee_locals - callee_param_count)*Interpreter::stackElementWords +
1540 moncount * frame::interpreter_frame_monitor_size() +
1541 tempcount* Interpreter::stackElementWords + popframe_extra_args;
1542 if (interpreter_frame != NULL) {
1543 #ifdef ASSERT
1544 if (!EnableInvokeDynamic)
1545 // @@@ FIXME: Should we correct interpreter_frame_sender_sp in the calling sequences?
1546 // Probably, since deoptimization doesn't work yet.
1547 assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), "Frame not properly walkable");
1548 assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)");
1549 #endif
1551 interpreter_frame->interpreter_frame_set_method(method);
1552 // NOTE the difference in using sender_sp and
1553 // interpreter_frame_sender_sp interpreter_frame_sender_sp is
1554 // the original sp of the caller (the unextended_sp) and
1555 // sender_sp is fp+16 XXX
1556 intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1;
1558 interpreter_frame->interpreter_frame_set_locals(locals);
1559 BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin();
1560 BasicObjectLock* monbot = montop - moncount;
1561 interpreter_frame->interpreter_frame_set_monitor_end(monbot);
1563 // Set last_sp
1564 intptr_t* esp = (intptr_t*) monbot -
1565 tempcount*Interpreter::stackElementWords -
1566 popframe_extra_args;
1567 interpreter_frame->interpreter_frame_set_last_sp(esp);
1569 // All frames but the initial (oldest) interpreter frame we fill in have
1570 // a value for sender_sp that allows walking the stack but isn't
1571 // truly correct. Correct the value here.
1572 if (extra_locals != 0 &&
1573 interpreter_frame->sender_sp() ==
1574 interpreter_frame->interpreter_frame_sender_sp()) {
1575 interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() +
1576 extra_locals);
1577 }
1578 *interpreter_frame->interpreter_frame_cache_addr() =
1579 method->constants()->cache();
1580 }
1581 return size;
1582 }
1584 //-----------------------------------------------------------------------------
1585 // Exceptions
1587 void TemplateInterpreterGenerator::generate_throw_exception() {
1588 // Entry point in previous activation (i.e., if the caller was
1589 // interpreted)
1590 Interpreter::_rethrow_exception_entry = __ pc();
1591 // Restore sp to interpreter_frame_last_sp even though we are going
1592 // to empty the expression stack for the exception processing.
1593 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1594 // rax: exception
1595 // rdx: return address/pc that threw exception
1596 __ restore_bcp(); // r13 points to call/send
1597 __ restore_locals();
1598 __ reinit_heapbase(); // restore r12 as heapbase.
1599 // Entry point for exceptions thrown within interpreter code
1600 Interpreter::_throw_exception_entry = __ pc();
1601 // expression stack is undefined here
1602 // rax: exception
1603 // r13: exception bcp
1604 __ verify_oop(rax);
1605 __ mov(c_rarg1, rax);
1607 // expression stack must be empty before entering the VM in case of
1608 // an exception
1609 __ empty_expression_stack();
1610 // find exception handler address and preserve exception oop
1611 __ call_VM(rdx,
1612 CAST_FROM_FN_PTR(address,
1613 InterpreterRuntime::exception_handler_for_exception),
1614 c_rarg1);
1615 // rax: exception handler entry point
1616 // rdx: preserved exception oop
1617 // r13: bcp for exception handler
1618 __ push_ptr(rdx); // push exception which is now the only value on the stack
1619 __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!)
1621 // If the exception is not handled in the current frame the frame is
1622 // removed and the exception is rethrown (i.e. exception
1623 // continuation is _rethrow_exception).
1624 //
1625 // Note: At this point the bci is still the bxi for the instruction
1626 // which caused the exception and the expression stack is
1627 // empty. Thus, for any VM calls at this point, GC will find a legal
1628 // oop map (with empty expression stack).
1630 // In current activation
1631 // tos: exception
1632 // esi: exception bcp
1634 //
1635 // JVMTI PopFrame support
1636 //
1638 Interpreter::_remove_activation_preserving_args_entry = __ pc();
1639 __ empty_expression_stack();
1640 // Set the popframe_processing bit in pending_popframe_condition
1641 // indicating that we are currently handling popframe, so that
1642 // call_VMs that may happen later do not trigger new popframe
1643 // handling cycles.
1644 __ movl(rdx, Address(r15_thread, JavaThread::popframe_condition_offset()));
1645 __ orl(rdx, JavaThread::popframe_processing_bit);
1646 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), rdx);
1648 {
1649 // Check to see whether we are returning to a deoptimized frame.
1650 // (The PopFrame call ensures that the caller of the popped frame is
1651 // either interpreted or compiled and deoptimizes it if compiled.)
1652 // In this case, we can't call dispatch_next() after the frame is
1653 // popped, but instead must save the incoming arguments and restore
1654 // them after deoptimization has occurred.
1655 //
1656 // Note that we don't compare the return PC against the
1657 // deoptimization blob's unpack entry because of the presence of
1658 // adapter frames in C2.
1659 Label caller_not_deoptimized;
1660 __ movptr(c_rarg1, Address(rbp, frame::return_addr_offset * wordSize));
1661 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1662 InterpreterRuntime::interpreter_contains), c_rarg1);
1663 __ testl(rax, rax);
1664 __ jcc(Assembler::notZero, caller_not_deoptimized);
1666 // Compute size of arguments for saving when returning to
1667 // deoptimized caller
1668 __ get_method(rax);
1669 __ load_unsigned_short(rax, Address(rax, in_bytes(methodOopDesc::
1670 size_of_parameters_offset())));
1671 __ shll(rax, Interpreter::logStackElementSize);
1672 __ restore_locals(); // XXX do we need this?
1673 __ subptr(r14, rax);
1674 __ addptr(r14, wordSize);
1675 // Save these arguments
1676 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1677 Deoptimization::
1678 popframe_preserve_args),
1679 r15_thread, rax, r14);
1681 __ remove_activation(vtos, rdx,
1682 /* throw_monitor_exception */ false,
1683 /* install_monitor_exception */ false,
1684 /* notify_jvmdi */ false);
1686 // Inform deoptimization that it is responsible for restoring
1687 // these arguments
1688 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1689 JavaThread::popframe_force_deopt_reexecution_bit);
1691 // Continue in deoptimization handler
1692 __ jmp(rdx);
1694 __ bind(caller_not_deoptimized);
1695 }
1697 __ remove_activation(vtos, rdx, /* rdx result (retaddr) is not used */
1698 /* throw_monitor_exception */ false,
1699 /* install_monitor_exception */ false,
1700 /* notify_jvmdi */ false);
1702 // Finish with popframe handling
1703 // A previous I2C followed by a deoptimization might have moved the
1704 // outgoing arguments further up the stack. PopFrame expects the
1705 // mutations to those outgoing arguments to be preserved and other
1706 // constraints basically require this frame to look exactly as
1707 // though it had previously invoked an interpreted activation with
1708 // no space between the top of the expression stack (current
1709 // last_sp) and the top of stack. Rather than force deopt to
1710 // maintain this kind of invariant all the time we call a small
1711 // fixup routine to move the mutated arguments onto the top of our
1712 // expression stack if necessary.
1713 __ mov(c_rarg1, rsp);
1714 __ movptr(c_rarg2, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1715 // PC must point into interpreter here
1716 __ set_last_Java_frame(noreg, rbp, __ pc());
1717 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), r15_thread, c_rarg1, c_rarg2);
1718 __ reset_last_Java_frame(true, true);
1719 // Restore the last_sp and null it out
1720 __ movptr(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize));
1721 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD);
1723 __ restore_bcp(); // XXX do we need this?
1724 __ restore_locals(); // XXX do we need this?
1725 // The method data pointer was incremented already during
1726 // call profiling. We have to restore the mdp for the current bcp.
1727 if (ProfileInterpreter) {
1728 __ set_method_data_pointer_for_bcp();
1729 }
1731 // Clear the popframe condition flag
1732 __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()),
1733 JavaThread::popframe_inactive);
1735 __ dispatch_next(vtos);
1736 // end of PopFrame support
1738 Interpreter::_remove_activation_entry = __ pc();
1740 // preserve exception over this code sequence
1741 __ pop_ptr(rax);
1742 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), rax);
1743 // remove the activation (without doing throws on illegalMonitorExceptions)
1744 __ remove_activation(vtos, rdx, false, true, false);
1745 // restore exception
1746 __ movptr(rax, Address(r15_thread, JavaThread::vm_result_offset()));
1747 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int32_t)NULL_WORD);
1748 __ verify_oop(rax);
1750 // In between activations - previous activation type unknown yet
1751 // compute continuation point - the continuation point expects the
1752 // following registers set up:
1753 //
1754 // rax: exception
1755 // rdx: return address/pc that threw exception
1756 // rsp: expression stack of caller
1757 // rbp: ebp of caller
1758 __ push(rax); // save exception
1759 __ push(rdx); // save return address
1760 __ super_call_VM_leaf(CAST_FROM_FN_PTR(address,
1761 SharedRuntime::exception_handler_for_return_address),
1762 r15_thread, rdx);
1763 __ mov(rbx, rax); // save exception handler
1764 __ pop(rdx); // restore return address
1765 __ pop(rax); // restore exception
1766 // Note that an "issuing PC" is actually the next PC after the call
1767 __ jmp(rbx); // jump to exception
1768 // handler of caller
1769 }
1772 //
1773 // JVMTI ForceEarlyReturn support
1774 //
1775 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
1776 address entry = __ pc();
1778 __ restore_bcp();
1779 __ restore_locals();
1780 __ empty_expression_stack();
1781 __ load_earlyret_value(state);
1783 __ movptr(rdx, Address(r15_thread, JavaThread::jvmti_thread_state_offset()));
1784 Address cond_addr(rdx, JvmtiThreadState::earlyret_state_offset());
1786 // Clear the earlyret state
1787 __ movl(cond_addr, JvmtiThreadState::earlyret_inactive);
1789 __ remove_activation(state, rsi,
1790 false, /* throw_monitor_exception */
1791 false, /* install_monitor_exception */
1792 true); /* notify_jvmdi */
1793 __ jmp(rsi);
1795 return entry;
1796 } // end of ForceEarlyReturn support
1799 //-----------------------------------------------------------------------------
1800 // Helper for vtos entry point generation
1802 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t,
1803 address& bep,
1804 address& cep,
1805 address& sep,
1806 address& aep,
1807 address& iep,
1808 address& lep,
1809 address& fep,
1810 address& dep,
1811 address& vep) {
1812 assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
1813 Label L;
1814 aep = __ pc(); __ push_ptr(); __ jmp(L);
1815 fep = __ pc(); __ push_f(); __ jmp(L);
1816 dep = __ pc(); __ push_d(); __ jmp(L);
1817 lep = __ pc(); __ push_l(); __ jmp(L);
1818 bep = cep = sep =
1819 iep = __ pc(); __ push_i();
1820 vep = __ pc();
1821 __ bind(L);
1822 generate_and_dispatch(t);
1823 }
1826 //-----------------------------------------------------------------------------
1827 // Generation of individual instructions
1829 // helpers for generate_and_dispatch
1832 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
1833 : TemplateInterpreterGenerator(code) {
1834 generate_all(); // down here so it can be "virtual"
1835 }
1837 //-----------------------------------------------------------------------------
1839 // Non-product code
1840 #ifndef PRODUCT
1841 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
1842 address entry = __ pc();
1844 __ push(state);
1845 __ push(c_rarg0);
1846 __ push(c_rarg1);
1847 __ push(c_rarg2);
1848 __ push(c_rarg3);
1849 __ mov(c_rarg2, rax); // Pass itos
1850 #ifdef _WIN64
1851 __ movflt(xmm3, xmm0); // Pass ftos
1852 #endif
1853 __ call_VM(noreg,
1854 CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode),
1855 c_rarg1, c_rarg2, c_rarg3);
1856 __ pop(c_rarg3);
1857 __ pop(c_rarg2);
1858 __ pop(c_rarg1);
1859 __ pop(c_rarg0);
1860 __ pop(state);
1861 __ ret(0); // return from result handler
1863 return entry;
1864 }
1866 void TemplateInterpreterGenerator::count_bytecode() {
1867 __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value));
1868 }
1870 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
1871 __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()]));
1872 }
1874 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
1875 __ mov32(rbx, ExternalAddress((address) &BytecodePairHistogram::_index));
1876 __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes);
1877 __ orl(rbx,
1878 ((int) t->bytecode()) <<
1879 BytecodePairHistogram::log2_number_of_codes);
1880 __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx);
1881 __ lea(rscratch1, ExternalAddress((address) BytecodePairHistogram::_counters));
1882 __ incrementl(Address(rscratch1, rbx, Address::times_4));
1883 }
1886 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
1887 // Call a little run-time stub to avoid blow-up for each bytecode.
1888 // The run-time runtime saves the right registers, depending on
1889 // the tosca in-state for the given template.
1891 assert(Interpreter::trace_code(t->tos_in()) != NULL,
1892 "entry must have been generated");
1893 __ mov(r12, rsp); // remember sp (can only use r12 if not using call_VM)
1894 __ andptr(rsp, -16); // align stack as required by ABI
1895 __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in())));
1896 __ mov(rsp, r12); // restore sp
1897 __ reinit_heapbase();
1898 }
1901 void TemplateInterpreterGenerator::stop_interpreter_at() {
1902 Label L;
1903 __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value),
1904 StopInterpreterAt);
1905 __ jcc(Assembler::notEqual, L);
1906 __ int3();
1907 __ bind(L);
1908 }
1909 #endif // !PRODUCT
1910 #endif // ! CC_INTERP