Wed, 02 Jun 2010 09:49:32 -0700
6954029: Improve implicit null check generation with compressed oops
Summary: Hoist DecodeN instruction above null check
Reviewed-by: never, twisti
1 //
2 // Copyright 1997-2010 Sun Microsystems, Inc. All Rights Reserved.
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 //
5 // This code is free software; you can redistribute it and/or modify it
6 // under the terms of the GNU General Public License version 2 only, as
7 // published by the Free Software Foundation.
8 //
9 // This code is distributed in the hope that it will be useful, but WITHOUT
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 // version 2 for more details (a copy is included in the LICENSE file that
13 // accompanied this code).
14 //
15 // You should have received a copy of the GNU General Public License version
16 // 2 along with this work; if not, write to the Free Software Foundation,
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 //
19 // Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
20 // CA 95054 USA or visit www.sun.com if you need additional information or
21 // have any questions.
22 //
23 //
25 // X86 Architecture Description File
27 //----------REGISTER DEFINITION BLOCK------------------------------------------
28 // This information is used by the matcher and the register allocator to
29 // describe individual registers and classes of registers within the target
30 // archtecture.
32 register %{
33 //----------Architecture Description Register Definitions----------------------
34 // General Registers
35 // "reg_def" name ( register save type, C convention save type,
36 // ideal register type, encoding );
37 // Register Save Types:
38 //
39 // NS = No-Save: The register allocator assumes that these registers
40 // can be used without saving upon entry to the method, &
41 // that they do not need to be saved at call sites.
42 //
43 // SOC = Save-On-Call: The register allocator assumes that these registers
44 // can be used without saving upon entry to the method,
45 // but that they must be saved at call sites.
46 //
47 // SOE = Save-On-Entry: The register allocator assumes that these registers
48 // must be saved before using them upon entry to the
49 // method, but they do not need to be saved at call
50 // sites.
51 //
52 // AS = Always-Save: The register allocator assumes that these registers
53 // must be saved before using them upon entry to the
54 // method, & that they must be saved at call sites.
55 //
56 // Ideal Register Type is used to determine how to save & restore a
57 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get
58 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI.
59 //
60 // The encoding number is the actual bit-pattern placed into the opcodes.
62 // General Registers
63 // Previously set EBX, ESI, and EDI as save-on-entry for java code
64 // Turn off SOE in java-code due to frequent use of uncommon-traps.
65 // Now that allocator is better, turn on ESI and EDI as SOE registers.
67 reg_def EBX(SOC, SOE, Op_RegI, 3, rbx->as_VMReg());
68 reg_def ECX(SOC, SOC, Op_RegI, 1, rcx->as_VMReg());
69 reg_def ESI(SOC, SOE, Op_RegI, 6, rsi->as_VMReg());
70 reg_def EDI(SOC, SOE, Op_RegI, 7, rdi->as_VMReg());
71 // now that adapter frames are gone EBP is always saved and restored by the prolog/epilog code
72 reg_def EBP(NS, SOE, Op_RegI, 5, rbp->as_VMReg());
73 reg_def EDX(SOC, SOC, Op_RegI, 2, rdx->as_VMReg());
74 reg_def EAX(SOC, SOC, Op_RegI, 0, rax->as_VMReg());
75 reg_def ESP( NS, NS, Op_RegI, 4, rsp->as_VMReg());
77 // Special Registers
78 reg_def EFLAGS(SOC, SOC, 0, 8, VMRegImpl::Bad());
80 // Float registers. We treat TOS/FPR0 special. It is invisible to the
81 // allocator, and only shows up in the encodings.
82 reg_def FPR0L( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
83 reg_def FPR0H( SOC, SOC, Op_RegF, 0, VMRegImpl::Bad());
84 // Ok so here's the trick FPR1 is really st(0) except in the midst
85 // of emission of assembly for a machnode. During the emission the fpu stack
86 // is pushed making FPR1 == st(1) temporarily. However at any safepoint
87 // the stack will not have this element so FPR1 == st(0) from the
88 // oopMap viewpoint. This same weirdness with numbering causes
89 // instruction encoding to have to play games with the register
90 // encode to correct for this 0/1 issue. See MachSpillCopyNode::implementation
91 // where it does flt->flt moves to see an example
92 //
93 reg_def FPR1L( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg());
94 reg_def FPR1H( SOC, SOC, Op_RegF, 1, as_FloatRegister(0)->as_VMReg()->next());
95 reg_def FPR2L( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg());
96 reg_def FPR2H( SOC, SOC, Op_RegF, 2, as_FloatRegister(1)->as_VMReg()->next());
97 reg_def FPR3L( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg());
98 reg_def FPR3H( SOC, SOC, Op_RegF, 3, as_FloatRegister(2)->as_VMReg()->next());
99 reg_def FPR4L( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg());
100 reg_def FPR4H( SOC, SOC, Op_RegF, 4, as_FloatRegister(3)->as_VMReg()->next());
101 reg_def FPR5L( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg());
102 reg_def FPR5H( SOC, SOC, Op_RegF, 5, as_FloatRegister(4)->as_VMReg()->next());
103 reg_def FPR6L( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg());
104 reg_def FPR6H( SOC, SOC, Op_RegF, 6, as_FloatRegister(5)->as_VMReg()->next());
105 reg_def FPR7L( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg());
106 reg_def FPR7H( SOC, SOC, Op_RegF, 7, as_FloatRegister(6)->as_VMReg()->next());
108 // XMM registers. 128-bit registers or 4 words each, labeled a-d.
109 // Word a in each register holds a Float, words ab hold a Double.
110 // We currently do not use the SIMD capabilities, so registers cd
111 // are unused at the moment.
112 reg_def XMM0a( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg());
113 reg_def XMM0b( SOC, SOC, Op_RegF, 0, xmm0->as_VMReg()->next());
114 reg_def XMM1a( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg());
115 reg_def XMM1b( SOC, SOC, Op_RegF, 1, xmm1->as_VMReg()->next());
116 reg_def XMM2a( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg());
117 reg_def XMM2b( SOC, SOC, Op_RegF, 2, xmm2->as_VMReg()->next());
118 reg_def XMM3a( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg());
119 reg_def XMM3b( SOC, SOC, Op_RegF, 3, xmm3->as_VMReg()->next());
120 reg_def XMM4a( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg());
121 reg_def XMM4b( SOC, SOC, Op_RegF, 4, xmm4->as_VMReg()->next());
122 reg_def XMM5a( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg());
123 reg_def XMM5b( SOC, SOC, Op_RegF, 5, xmm5->as_VMReg()->next());
124 reg_def XMM6a( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg());
125 reg_def XMM6b( SOC, SOC, Op_RegF, 6, xmm6->as_VMReg()->next());
126 reg_def XMM7a( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg());
127 reg_def XMM7b( SOC, SOC, Op_RegF, 7, xmm7->as_VMReg()->next());
129 // Specify priority of register selection within phases of register
130 // allocation. Highest priority is first. A useful heuristic is to
131 // give registers a low priority when they are required by machine
132 // instructions, like EAX and EDX. Registers which are used as
133 // pairs must fall on an even boundary (witness the FPR#L's in this list).
134 // For the Intel integer registers, the equivalent Long pairs are
135 // EDX:EAX, EBX:ECX, and EDI:EBP.
136 alloc_class chunk0( ECX, EBX, EBP, EDI, EAX, EDX, ESI, ESP,
137 FPR0L, FPR0H, FPR1L, FPR1H, FPR2L, FPR2H,
138 FPR3L, FPR3H, FPR4L, FPR4H, FPR5L, FPR5H,
139 FPR6L, FPR6H, FPR7L, FPR7H );
141 alloc_class chunk1( XMM0a, XMM0b,
142 XMM1a, XMM1b,
143 XMM2a, XMM2b,
144 XMM3a, XMM3b,
145 XMM4a, XMM4b,
146 XMM5a, XMM5b,
147 XMM6a, XMM6b,
148 XMM7a, XMM7b, EFLAGS);
151 //----------Architecture Description Register Classes--------------------------
152 // Several register classes are automatically defined based upon information in
153 // this architecture description.
154 // 1) reg_class inline_cache_reg ( /* as def'd in frame section */ )
155 // 2) reg_class compiler_method_oop_reg ( /* as def'd in frame section */ )
156 // 2) reg_class interpreter_method_oop_reg ( /* as def'd in frame section */ )
157 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ )
158 //
159 // Class for all registers
160 reg_class any_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX, ESP);
161 // Class for general registers
162 reg_class e_reg(EAX, EDX, EBP, EDI, ESI, ECX, EBX);
163 // Class for general registers which may be used for implicit null checks on win95
164 // Also safe for use by tailjump. We don't want to allocate in rbp,
165 reg_class e_reg_no_rbp(EAX, EDX, EDI, ESI, ECX, EBX);
166 // Class of "X" registers
167 reg_class x_reg(EBX, ECX, EDX, EAX);
168 // Class of registers that can appear in an address with no offset.
169 // EBP and ESP require an extra instruction byte for zero offset.
170 // Used in fast-unlock
171 reg_class p_reg(EDX, EDI, ESI, EBX);
172 // Class for general registers not including ECX
173 reg_class ncx_reg(EAX, EDX, EBP, EDI, ESI, EBX);
174 // Class for general registers not including EAX
175 reg_class nax_reg(EDX, EDI, ESI, ECX, EBX);
176 // Class for general registers not including EAX or EBX.
177 reg_class nabx_reg(EDX, EDI, ESI, ECX, EBP);
178 // Class of EAX (for multiply and divide operations)
179 reg_class eax_reg(EAX);
180 // Class of EBX (for atomic add)
181 reg_class ebx_reg(EBX);
182 // Class of ECX (for shift and JCXZ operations and cmpLTMask)
183 reg_class ecx_reg(ECX);
184 // Class of EDX (for multiply and divide operations)
185 reg_class edx_reg(EDX);
186 // Class of EDI (for synchronization)
187 reg_class edi_reg(EDI);
188 // Class of ESI (for synchronization)
189 reg_class esi_reg(ESI);
190 // Singleton class for interpreter's stack pointer
191 reg_class ebp_reg(EBP);
192 // Singleton class for stack pointer
193 reg_class sp_reg(ESP);
194 // Singleton class for instruction pointer
195 // reg_class ip_reg(EIP);
196 // Singleton class for condition codes
197 reg_class int_flags(EFLAGS);
198 // Class of integer register pairs
199 reg_class long_reg( EAX,EDX, ECX,EBX, EBP,EDI );
200 // Class of integer register pairs that aligns with calling convention
201 reg_class eadx_reg( EAX,EDX );
202 reg_class ebcx_reg( ECX,EBX );
203 // Not AX or DX, used in divides
204 reg_class nadx_reg( EBX,ECX,ESI,EDI,EBP );
206 // Floating point registers. Notice FPR0 is not a choice.
207 // FPR0 is not ever allocated; we use clever encodings to fake
208 // a 2-address instructions out of Intels FP stack.
209 reg_class flt_reg( FPR1L,FPR2L,FPR3L,FPR4L,FPR5L,FPR6L,FPR7L );
211 // make a register class for SSE registers
212 reg_class xmm_reg(XMM0a, XMM1a, XMM2a, XMM3a, XMM4a, XMM5a, XMM6a, XMM7a);
214 // make a double register class for SSE2 registers
215 reg_class xdb_reg(XMM0a,XMM0b, XMM1a,XMM1b, XMM2a,XMM2b, XMM3a,XMM3b,
216 XMM4a,XMM4b, XMM5a,XMM5b, XMM6a,XMM6b, XMM7a,XMM7b );
218 reg_class dbl_reg( FPR1L,FPR1H, FPR2L,FPR2H, FPR3L,FPR3H,
219 FPR4L,FPR4H, FPR5L,FPR5H, FPR6L,FPR6H,
220 FPR7L,FPR7H );
222 reg_class flt_reg0( FPR1L );
223 reg_class dbl_reg0( FPR1L,FPR1H );
224 reg_class dbl_reg1( FPR2L,FPR2H );
225 reg_class dbl_notreg0( FPR2L,FPR2H, FPR3L,FPR3H, FPR4L,FPR4H,
226 FPR5L,FPR5H, FPR6L,FPR6H, FPR7L,FPR7H );
228 // XMM6 and XMM7 could be used as temporary registers for long, float and
229 // double values for SSE2.
230 reg_class xdb_reg6( XMM6a,XMM6b );
231 reg_class xdb_reg7( XMM7a,XMM7b );
232 %}
235 //----------SOURCE BLOCK-------------------------------------------------------
236 // This is a block of C++ code which provides values, functions, and
237 // definitions necessary in the rest of the architecture description
238 source_hpp %{
239 // Must be visible to the DFA in dfa_x86_32.cpp
240 extern bool is_operand_hi32_zero(Node* n);
241 %}
243 source %{
244 #define RELOC_IMM32 Assembler::imm_operand
245 #define RELOC_DISP32 Assembler::disp32_operand
247 #define __ _masm.
249 // How to find the high register of a Long pair, given the low register
250 #define HIGH_FROM_LOW(x) ((x)+2)
252 // These masks are used to provide 128-bit aligned bitmasks to the XMM
253 // instructions, to allow sign-masking or sign-bit flipping. They allow
254 // fast versions of NegF/NegD and AbsF/AbsD.
256 // Note: 'double' and 'long long' have 32-bits alignment on x86.
257 static jlong* double_quadword(jlong *adr, jlong lo, jlong hi) {
258 // Use the expression (adr)&(~0xF) to provide 128-bits aligned address
259 // of 128-bits operands for SSE instructions.
260 jlong *operand = (jlong*)(((uintptr_t)adr)&((uintptr_t)(~0xF)));
261 // Store the value to a 128-bits operand.
262 operand[0] = lo;
263 operand[1] = hi;
264 return operand;
265 }
267 // Buffer for 128-bits masks used by SSE instructions.
268 static jlong fp_signmask_pool[(4+1)*2]; // 4*128bits(data) + 128bits(alignment)
270 // Static initialization during VM startup.
271 static jlong *float_signmask_pool = double_quadword(&fp_signmask_pool[1*2], CONST64(0x7FFFFFFF7FFFFFFF), CONST64(0x7FFFFFFF7FFFFFFF));
272 static jlong *double_signmask_pool = double_quadword(&fp_signmask_pool[2*2], CONST64(0x7FFFFFFFFFFFFFFF), CONST64(0x7FFFFFFFFFFFFFFF));
273 static jlong *float_signflip_pool = double_quadword(&fp_signmask_pool[3*2], CONST64(0x8000000080000000), CONST64(0x8000000080000000));
274 static jlong *double_signflip_pool = double_quadword(&fp_signmask_pool[4*2], CONST64(0x8000000000000000), CONST64(0x8000000000000000));
276 // Offset hacking within calls.
277 static int pre_call_FPU_size() {
278 if (Compile::current()->in_24_bit_fp_mode())
279 return 6; // fldcw
280 return 0;
281 }
283 static int preserve_SP_size() {
284 return LP64_ONLY(1 +) 2; // [rex,] op, rm(reg/reg)
285 }
287 // !!!!! Special hack to get all type of calls to specify the byte offset
288 // from the start of the call to the point where the return address
289 // will point.
290 int MachCallStaticJavaNode::ret_addr_offset() {
291 int offset = 5 + pre_call_FPU_size(); // 5 bytes from start of call to where return address points
292 if (_method_handle_invoke)
293 offset += preserve_SP_size();
294 return offset;
295 }
297 int MachCallDynamicJavaNode::ret_addr_offset() {
298 return 10 + pre_call_FPU_size(); // 10 bytes from start of call to where return address points
299 }
301 static int sizeof_FFree_Float_Stack_All = -1;
303 int MachCallRuntimeNode::ret_addr_offset() {
304 assert(sizeof_FFree_Float_Stack_All != -1, "must have been emitted already");
305 return sizeof_FFree_Float_Stack_All + 5 + pre_call_FPU_size();
306 }
308 // Indicate if the safepoint node needs the polling page as an input.
309 // Since x86 does have absolute addressing, it doesn't.
310 bool SafePointNode::needs_polling_address_input() {
311 return false;
312 }
314 //
315 // Compute padding required for nodes which need alignment
316 //
318 // The address of the call instruction needs to be 4-byte aligned to
319 // ensure that it does not span a cache line so that it can be patched.
320 int CallStaticJavaDirectNode::compute_padding(int current_offset) const {
321 current_offset += pre_call_FPU_size(); // skip fldcw, if any
322 current_offset += 1; // skip call opcode byte
323 return round_to(current_offset, alignment_required()) - current_offset;
324 }
326 // The address of the call instruction needs to be 4-byte aligned to
327 // ensure that it does not span a cache line so that it can be patched.
328 int CallStaticJavaHandleNode::compute_padding(int current_offset) const {
329 current_offset += pre_call_FPU_size(); // skip fldcw, if any
330 current_offset += preserve_SP_size(); // skip mov rbp, rsp
331 current_offset += 1; // skip call opcode byte
332 return round_to(current_offset, alignment_required()) - current_offset;
333 }
335 // The address of the call instruction needs to be 4-byte aligned to
336 // ensure that it does not span a cache line so that it can be patched.
337 int CallDynamicJavaDirectNode::compute_padding(int current_offset) const {
338 current_offset += pre_call_FPU_size(); // skip fldcw, if any
339 current_offset += 5; // skip MOV instruction
340 current_offset += 1; // skip call opcode byte
341 return round_to(current_offset, alignment_required()) - current_offset;
342 }
344 #ifndef PRODUCT
345 void MachBreakpointNode::format( PhaseRegAlloc *, outputStream* st ) const {
346 st->print("INT3");
347 }
348 #endif
350 // EMIT_RM()
351 void emit_rm(CodeBuffer &cbuf, int f1, int f2, int f3) {
352 unsigned char c = (unsigned char)((f1 << 6) | (f2 << 3) | f3);
353 *(cbuf.code_end()) = c;
354 cbuf.set_code_end(cbuf.code_end() + 1);
355 }
357 // EMIT_CC()
358 void emit_cc(CodeBuffer &cbuf, int f1, int f2) {
359 unsigned char c = (unsigned char)( f1 | f2 );
360 *(cbuf.code_end()) = c;
361 cbuf.set_code_end(cbuf.code_end() + 1);
362 }
364 // EMIT_OPCODE()
365 void emit_opcode(CodeBuffer &cbuf, int code) {
366 *(cbuf.code_end()) = (unsigned char)code;
367 cbuf.set_code_end(cbuf.code_end() + 1);
368 }
370 // EMIT_OPCODE() w/ relocation information
371 void emit_opcode(CodeBuffer &cbuf, int code, relocInfo::relocType reloc, int offset = 0) {
372 cbuf.relocate(cbuf.inst_mark() + offset, reloc);
373 emit_opcode(cbuf, code);
374 }
376 // EMIT_D8()
377 void emit_d8(CodeBuffer &cbuf, int d8) {
378 *(cbuf.code_end()) = (unsigned char)d8;
379 cbuf.set_code_end(cbuf.code_end() + 1);
380 }
382 // EMIT_D16()
383 void emit_d16(CodeBuffer &cbuf, int d16) {
384 *((short *)(cbuf.code_end())) = d16;
385 cbuf.set_code_end(cbuf.code_end() + 2);
386 }
388 // EMIT_D32()
389 void emit_d32(CodeBuffer &cbuf, int d32) {
390 *((int *)(cbuf.code_end())) = d32;
391 cbuf.set_code_end(cbuf.code_end() + 4);
392 }
394 // emit 32 bit value and construct relocation entry from relocInfo::relocType
395 void emit_d32_reloc(CodeBuffer &cbuf, int d32, relocInfo::relocType reloc,
396 int format) {
397 cbuf.relocate(cbuf.inst_mark(), reloc, format);
399 *((int *)(cbuf.code_end())) = d32;
400 cbuf.set_code_end(cbuf.code_end() + 4);
401 }
403 // emit 32 bit value and construct relocation entry from RelocationHolder
404 void emit_d32_reloc(CodeBuffer &cbuf, int d32, RelocationHolder const& rspec,
405 int format) {
406 #ifdef ASSERT
407 if (rspec.reloc()->type() == relocInfo::oop_type && d32 != 0 && d32 != (int)Universe::non_oop_word()) {
408 assert(oop(d32)->is_oop() && (ScavengeRootsInCode || !oop(d32)->is_scavengable()), "cannot embed scavengable oops in code");
409 }
410 #endif
411 cbuf.relocate(cbuf.inst_mark(), rspec, format);
413 *((int *)(cbuf.code_end())) = d32;
414 cbuf.set_code_end(cbuf.code_end() + 4);
415 }
417 // Access stack slot for load or store
418 void store_to_stackslot(CodeBuffer &cbuf, int opcode, int rm_field, int disp) {
419 emit_opcode( cbuf, opcode ); // (e.g., FILD [ESP+src])
420 if( -128 <= disp && disp <= 127 ) {
421 emit_rm( cbuf, 0x01, rm_field, ESP_enc ); // R/M byte
422 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
423 emit_d8 (cbuf, disp); // Displacement // R/M byte
424 } else {
425 emit_rm( cbuf, 0x02, rm_field, ESP_enc ); // R/M byte
426 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
427 emit_d32(cbuf, disp); // Displacement // R/M byte
428 }
429 }
431 // eRegI ereg, memory mem) %{ // emit_reg_mem
432 void encode_RegMem( CodeBuffer &cbuf, int reg_encoding, int base, int index, int scale, int displace, bool displace_is_oop ) {
433 // There is no index & no scale, use form without SIB byte
434 if ((index == 0x4) &&
435 (scale == 0) && (base != ESP_enc)) {
436 // If no displacement, mode is 0x0; unless base is [EBP]
437 if ( (displace == 0) && (base != EBP_enc) ) {
438 emit_rm(cbuf, 0x0, reg_encoding, base);
439 }
440 else { // If 8-bit displacement, mode 0x1
441 if ((displace >= -128) && (displace <= 127)
442 && !(displace_is_oop) ) {
443 emit_rm(cbuf, 0x1, reg_encoding, base);
444 emit_d8(cbuf, displace);
445 }
446 else { // If 32-bit displacement
447 if (base == -1) { // Special flag for absolute address
448 emit_rm(cbuf, 0x0, reg_encoding, 0x5);
449 // (manual lies; no SIB needed here)
450 if ( displace_is_oop ) {
451 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
452 } else {
453 emit_d32 (cbuf, displace);
454 }
455 }
456 else { // Normal base + offset
457 emit_rm(cbuf, 0x2, reg_encoding, base);
458 if ( displace_is_oop ) {
459 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
460 } else {
461 emit_d32 (cbuf, displace);
462 }
463 }
464 }
465 }
466 }
467 else { // Else, encode with the SIB byte
468 // If no displacement, mode is 0x0; unless base is [EBP]
469 if (displace == 0 && (base != EBP_enc)) { // If no displacement
470 emit_rm(cbuf, 0x0, reg_encoding, 0x4);
471 emit_rm(cbuf, scale, index, base);
472 }
473 else { // If 8-bit displacement, mode 0x1
474 if ((displace >= -128) && (displace <= 127)
475 && !(displace_is_oop) ) {
476 emit_rm(cbuf, 0x1, reg_encoding, 0x4);
477 emit_rm(cbuf, scale, index, base);
478 emit_d8(cbuf, displace);
479 }
480 else { // If 32-bit displacement
481 if (base == 0x04 ) {
482 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
483 emit_rm(cbuf, scale, index, 0x04);
484 } else {
485 emit_rm(cbuf, 0x2, reg_encoding, 0x4);
486 emit_rm(cbuf, scale, index, base);
487 }
488 if ( displace_is_oop ) {
489 emit_d32_reloc(cbuf, displace, relocInfo::oop_type, 1);
490 } else {
491 emit_d32 (cbuf, displace);
492 }
493 }
494 }
495 }
496 }
499 void encode_Copy( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
500 if( dst_encoding == src_encoding ) {
501 // reg-reg copy, use an empty encoding
502 } else {
503 emit_opcode( cbuf, 0x8B );
504 emit_rm(cbuf, 0x3, dst_encoding, src_encoding );
505 }
506 }
508 void encode_CopyXD( CodeBuffer &cbuf, int dst_encoding, int src_encoding ) {
509 if( dst_encoding == src_encoding ) {
510 // reg-reg copy, use an empty encoding
511 } else {
512 MacroAssembler _masm(&cbuf);
514 __ movdqa(as_XMMRegister(dst_encoding), as_XMMRegister(src_encoding));
515 }
516 }
519 //=============================================================================
520 #ifndef PRODUCT
521 void MachPrologNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
522 Compile* C = ra_->C;
523 if( C->in_24_bit_fp_mode() ) {
524 st->print("FLDCW 24 bit fpu control word");
525 st->print_cr(""); st->print("\t");
526 }
528 int framesize = C->frame_slots() << LogBytesPerInt;
529 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
530 // Remove two words for return addr and rbp,
531 framesize -= 2*wordSize;
533 // Calls to C2R adapters often do not accept exceptional returns.
534 // We require that their callers must bang for them. But be careful, because
535 // some VM calls (such as call site linkage) can use several kilobytes of
536 // stack. But the stack safety zone should account for that.
537 // See bugs 4446381, 4468289, 4497237.
538 if (C->need_stack_bang(framesize)) {
539 st->print_cr("# stack bang"); st->print("\t");
540 }
541 st->print_cr("PUSHL EBP"); st->print("\t");
543 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
544 st->print("PUSH 0xBADB100D\t# Majik cookie for stack depth check");
545 st->print_cr(""); st->print("\t");
546 framesize -= wordSize;
547 }
549 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
550 if (framesize) {
551 st->print("SUB ESP,%d\t# Create frame",framesize);
552 }
553 } else {
554 st->print("SUB ESP,%d\t# Create frame",framesize);
555 }
556 }
557 #endif
560 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
561 Compile* C = ra_->C;
563 if (UseSSE >= 2 && VerifyFPU) {
564 MacroAssembler masm(&cbuf);
565 masm.verify_FPU(0, "FPU stack must be clean on entry");
566 }
568 // WARNING: Initial instruction MUST be 5 bytes or longer so that
569 // NativeJump::patch_verified_entry will be able to patch out the entry
570 // code safely. The fldcw is ok at 6 bytes, the push to verify stack
571 // depth is ok at 5 bytes, the frame allocation can be either 3 or
572 // 6 bytes. So if we don't do the fldcw or the push then we must
573 // use the 6 byte frame allocation even if we have no frame. :-(
574 // If method sets FPU control word do it now
575 if( C->in_24_bit_fp_mode() ) {
576 MacroAssembler masm(&cbuf);
577 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
578 }
580 int framesize = C->frame_slots() << LogBytesPerInt;
581 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
582 // Remove two words for return addr and rbp,
583 framesize -= 2*wordSize;
585 // Calls to C2R adapters often do not accept exceptional returns.
586 // We require that their callers must bang for them. But be careful, because
587 // some VM calls (such as call site linkage) can use several kilobytes of
588 // stack. But the stack safety zone should account for that.
589 // See bugs 4446381, 4468289, 4497237.
590 if (C->need_stack_bang(framesize)) {
591 MacroAssembler masm(&cbuf);
592 masm.generate_stack_overflow_check(framesize);
593 }
595 // We always push rbp, so that on return to interpreter rbp, will be
596 // restored correctly and we can correct the stack.
597 emit_opcode(cbuf, 0x50 | EBP_enc);
599 if( VerifyStackAtCalls ) { // Majik cookie to verify stack depth
600 emit_opcode(cbuf, 0x68); // push 0xbadb100d
601 emit_d32(cbuf, 0xbadb100d);
602 framesize -= wordSize;
603 }
605 if ((C->in_24_bit_fp_mode() || VerifyStackAtCalls ) && framesize < 128 ) {
606 if (framesize) {
607 emit_opcode(cbuf, 0x83); // sub SP,#framesize
608 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
609 emit_d8(cbuf, framesize);
610 }
611 } else {
612 emit_opcode(cbuf, 0x81); // sub SP,#framesize
613 emit_rm(cbuf, 0x3, 0x05, ESP_enc);
614 emit_d32(cbuf, framesize);
615 }
616 C->set_frame_complete(cbuf.code_end() - cbuf.code_begin());
618 #ifdef ASSERT
619 if (VerifyStackAtCalls) {
620 Label L;
621 MacroAssembler masm(&cbuf);
622 masm.push(rax);
623 masm.mov(rax, rsp);
624 masm.andptr(rax, StackAlignmentInBytes-1);
625 masm.cmpptr(rax, StackAlignmentInBytes-wordSize);
626 masm.pop(rax);
627 masm.jcc(Assembler::equal, L);
628 masm.stop("Stack is not properly aligned!");
629 masm.bind(L);
630 }
631 #endif
633 }
635 uint MachPrologNode::size(PhaseRegAlloc *ra_) const {
636 return MachNode::size(ra_); // too many variables; just compute it the hard way
637 }
639 int MachPrologNode::reloc() const {
640 return 0; // a large enough number
641 }
643 //=============================================================================
644 #ifndef PRODUCT
645 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
646 Compile *C = ra_->C;
647 int framesize = C->frame_slots() << LogBytesPerInt;
648 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
649 // Remove two words for return addr and rbp,
650 framesize -= 2*wordSize;
652 if( C->in_24_bit_fp_mode() ) {
653 st->print("FLDCW standard control word");
654 st->cr(); st->print("\t");
655 }
656 if( framesize ) {
657 st->print("ADD ESP,%d\t# Destroy frame",framesize);
658 st->cr(); st->print("\t");
659 }
660 st->print_cr("POPL EBP"); st->print("\t");
661 if( do_polling() && C->is_method_compilation() ) {
662 st->print("TEST PollPage,EAX\t! Poll Safepoint");
663 st->cr(); st->print("\t");
664 }
665 }
666 #endif
668 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
669 Compile *C = ra_->C;
671 // If method set FPU control word, restore to standard control word
672 if( C->in_24_bit_fp_mode() ) {
673 MacroAssembler masm(&cbuf);
674 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
675 }
677 int framesize = C->frame_slots() << LogBytesPerInt;
678 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
679 // Remove two words for return addr and rbp,
680 framesize -= 2*wordSize;
682 // Note that VerifyStackAtCalls' Majik cookie does not change the frame size popped here
684 if( framesize >= 128 ) {
685 emit_opcode(cbuf, 0x81); // add SP, #framesize
686 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
687 emit_d32(cbuf, framesize);
688 }
689 else if( framesize ) {
690 emit_opcode(cbuf, 0x83); // add SP, #framesize
691 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
692 emit_d8(cbuf, framesize);
693 }
695 emit_opcode(cbuf, 0x58 | EBP_enc);
697 if( do_polling() && C->is_method_compilation() ) {
698 cbuf.relocate(cbuf.code_end(), relocInfo::poll_return_type, 0);
699 emit_opcode(cbuf,0x85);
700 emit_rm(cbuf, 0x0, EAX_enc, 0x5); // EAX
701 emit_d32(cbuf, (intptr_t)os::get_polling_page());
702 }
703 }
705 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const {
706 Compile *C = ra_->C;
707 // If method set FPU control word, restore to standard control word
708 int size = C->in_24_bit_fp_mode() ? 6 : 0;
709 if( do_polling() && C->is_method_compilation() ) size += 6;
711 int framesize = C->frame_slots() << LogBytesPerInt;
712 assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned");
713 // Remove two words for return addr and rbp,
714 framesize -= 2*wordSize;
716 size++; // popl rbp,
718 if( framesize >= 128 ) {
719 size += 6;
720 } else {
721 size += framesize ? 3 : 0;
722 }
723 return size;
724 }
726 int MachEpilogNode::reloc() const {
727 return 0; // a large enough number
728 }
730 const Pipeline * MachEpilogNode::pipeline() const {
731 return MachNode::pipeline_class();
732 }
734 int MachEpilogNode::safepoint_offset() const { return 0; }
736 //=============================================================================
738 enum RC { rc_bad, rc_int, rc_float, rc_xmm, rc_stack };
739 static enum RC rc_class( OptoReg::Name reg ) {
741 if( !OptoReg::is_valid(reg) ) return rc_bad;
742 if (OptoReg::is_stack(reg)) return rc_stack;
744 VMReg r = OptoReg::as_VMReg(reg);
745 if (r->is_Register()) return rc_int;
746 if (r->is_FloatRegister()) {
747 assert(UseSSE < 2, "shouldn't be used in SSE2+ mode");
748 return rc_float;
749 }
750 assert(r->is_XMMRegister(), "must be");
751 return rc_xmm;
752 }
754 static int impl_helper( CodeBuffer *cbuf, bool do_size, bool is_load, int offset, int reg,
755 int opcode, const char *op_str, int size, outputStream* st ) {
756 if( cbuf ) {
757 emit_opcode (*cbuf, opcode );
758 encode_RegMem(*cbuf, Matcher::_regEncode[reg], ESP_enc, 0x4, 0, offset, false);
759 #ifndef PRODUCT
760 } else if( !do_size ) {
761 if( size != 0 ) st->print("\n\t");
762 if( opcode == 0x8B || opcode == 0x89 ) { // MOV
763 if( is_load ) st->print("%s %s,[ESP + #%d]",op_str,Matcher::regName[reg],offset);
764 else st->print("%s [ESP + #%d],%s",op_str,offset,Matcher::regName[reg]);
765 } else { // FLD, FST, PUSH, POP
766 st->print("%s [ESP + #%d]",op_str,offset);
767 }
768 #endif
769 }
770 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
771 return size+3+offset_size;
772 }
774 // Helper for XMM registers. Extra opcode bits, limited syntax.
775 static int impl_x_helper( CodeBuffer *cbuf, bool do_size, bool is_load,
776 int offset, int reg_lo, int reg_hi, int size, outputStream* st ) {
777 if( cbuf ) {
778 if( reg_lo+1 == reg_hi ) { // double move?
779 if( is_load && !UseXmmLoadAndClearUpper )
780 emit_opcode(*cbuf, 0x66 ); // use 'movlpd' for load
781 else
782 emit_opcode(*cbuf, 0xF2 ); // use 'movsd' otherwise
783 } else {
784 emit_opcode(*cbuf, 0xF3 );
785 }
786 emit_opcode(*cbuf, 0x0F );
787 if( reg_lo+1 == reg_hi && is_load && !UseXmmLoadAndClearUpper )
788 emit_opcode(*cbuf, 0x12 ); // use 'movlpd' for load
789 else
790 emit_opcode(*cbuf, is_load ? 0x10 : 0x11 );
791 encode_RegMem(*cbuf, Matcher::_regEncode[reg_lo], ESP_enc, 0x4, 0, offset, false);
792 #ifndef PRODUCT
793 } else if( !do_size ) {
794 if( size != 0 ) st->print("\n\t");
795 if( reg_lo+1 == reg_hi ) { // double move?
796 if( is_load ) st->print("%s %s,[ESP + #%d]",
797 UseXmmLoadAndClearUpper ? "MOVSD " : "MOVLPD",
798 Matcher::regName[reg_lo], offset);
799 else st->print("MOVSD [ESP + #%d],%s",
800 offset, Matcher::regName[reg_lo]);
801 } else {
802 if( is_load ) st->print("MOVSS %s,[ESP + #%d]",
803 Matcher::regName[reg_lo], offset);
804 else st->print("MOVSS [ESP + #%d],%s",
805 offset, Matcher::regName[reg_lo]);
806 }
807 #endif
808 }
809 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
810 return size+5+offset_size;
811 }
814 static int impl_movx_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int dst_lo,
815 int src_hi, int dst_hi, int size, outputStream* st ) {
816 if( UseXmmRegToRegMoveAll ) {//Use movaps,movapd to move between xmm registers
817 if( cbuf ) {
818 if( (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ) {
819 emit_opcode(*cbuf, 0x66 );
820 }
821 emit_opcode(*cbuf, 0x0F );
822 emit_opcode(*cbuf, 0x28 );
823 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
824 #ifndef PRODUCT
825 } else if( !do_size ) {
826 if( size != 0 ) st->print("\n\t");
827 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
828 st->print("MOVAPD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
829 } else {
830 st->print("MOVAPS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
831 }
832 #endif
833 }
834 return size + ((src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 4 : 3);
835 } else {
836 if( cbuf ) {
837 emit_opcode(*cbuf, (src_lo+1 == src_hi && dst_lo+1 == dst_hi) ? 0xF2 : 0xF3 );
838 emit_opcode(*cbuf, 0x0F );
839 emit_opcode(*cbuf, 0x10 );
840 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst_lo], Matcher::_regEncode[src_lo] );
841 #ifndef PRODUCT
842 } else if( !do_size ) {
843 if( size != 0 ) st->print("\n\t");
844 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double move?
845 st->print("MOVSD %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
846 } else {
847 st->print("MOVSS %s,%s",Matcher::regName[dst_lo],Matcher::regName[src_lo]);
848 }
849 #endif
850 }
851 return size+4;
852 }
853 }
855 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int size, outputStream* st ) {
856 if( cbuf ) {
857 emit_opcode(*cbuf, 0x8B );
858 emit_rm (*cbuf, 0x3, Matcher::_regEncode[dst], Matcher::_regEncode[src] );
859 #ifndef PRODUCT
860 } else if( !do_size ) {
861 if( size != 0 ) st->print("\n\t");
862 st->print("MOV %s,%s",Matcher::regName[dst],Matcher::regName[src]);
863 #endif
864 }
865 return size+2;
866 }
868 static int impl_fp_store_helper( CodeBuffer *cbuf, bool do_size, int src_lo, int src_hi, int dst_lo, int dst_hi,
869 int offset, int size, outputStream* st ) {
870 if( src_lo != FPR1L_num ) { // Move value to top of FP stack, if not already there
871 if( cbuf ) {
872 emit_opcode( *cbuf, 0xD9 ); // FLD (i.e., push it)
873 emit_d8( *cbuf, 0xC0-1+Matcher::_regEncode[src_lo] );
874 #ifndef PRODUCT
875 } else if( !do_size ) {
876 if( size != 0 ) st->print("\n\t");
877 st->print("FLD %s",Matcher::regName[src_lo]);
878 #endif
879 }
880 size += 2;
881 }
883 int st_op = (src_lo != FPR1L_num) ? EBX_num /*store & pop*/ : EDX_num /*store no pop*/;
884 const char *op_str;
885 int op;
886 if( src_lo+1 == src_hi && dst_lo+1 == dst_hi ) { // double store?
887 op_str = (src_lo != FPR1L_num) ? "FSTP_D" : "FST_D ";
888 op = 0xDD;
889 } else { // 32-bit store
890 op_str = (src_lo != FPR1L_num) ? "FSTP_S" : "FST_S ";
891 op = 0xD9;
892 assert( !OptoReg::is_valid(src_hi) && !OptoReg::is_valid(dst_hi), "no non-adjacent float-stores" );
893 }
895 return impl_helper(cbuf,do_size,false,offset,st_op,op,op_str,size, st);
896 }
898 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, outputStream* st ) const {
899 // Get registers to move
900 OptoReg::Name src_second = ra_->get_reg_second(in(1));
901 OptoReg::Name src_first = ra_->get_reg_first(in(1));
902 OptoReg::Name dst_second = ra_->get_reg_second(this );
903 OptoReg::Name dst_first = ra_->get_reg_first(this );
905 enum RC src_second_rc = rc_class(src_second);
906 enum RC src_first_rc = rc_class(src_first);
907 enum RC dst_second_rc = rc_class(dst_second);
908 enum RC dst_first_rc = rc_class(dst_first);
910 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" );
912 // Generate spill code!
913 int size = 0;
915 if( src_first == dst_first && src_second == dst_second )
916 return size; // Self copy, no move
918 // --------------------------------------
919 // Check for mem-mem move. push/pop to move.
920 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) {
921 if( src_second == dst_first ) { // overlapping stack copy ranges
922 assert( src_second_rc == rc_stack && dst_second_rc == rc_stack, "we only expect a stk-stk copy here" );
923 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
924 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
925 src_second_rc = dst_second_rc = rc_bad; // flag as already moved the second bits
926 }
927 // move low bits
928 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),ESI_num,0xFF,"PUSH ",size, st);
929 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),EAX_num,0x8F,"POP ",size, st);
930 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { // mov second bits
931 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),ESI_num,0xFF,"PUSH ",size, st);
932 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),EAX_num,0x8F,"POP ",size, st);
933 }
934 return size;
935 }
937 // --------------------------------------
938 // Check for integer reg-reg copy
939 if( src_first_rc == rc_int && dst_first_rc == rc_int )
940 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,size, st);
942 // Check for integer store
943 if( src_first_rc == rc_int && dst_first_rc == rc_stack )
944 size = impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first,0x89,"MOV ",size, st);
946 // Check for integer load
947 if( dst_first_rc == rc_int && src_first_rc == rc_stack )
948 size = impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first,0x8B,"MOV ",size, st);
950 // --------------------------------------
951 // Check for float reg-reg copy
952 if( src_first_rc == rc_float && dst_first_rc == rc_float ) {
953 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
954 (src_first+1 == src_second && dst_first+1 == dst_second), "no non-adjacent float-moves" );
955 if( cbuf ) {
957 // Note the mucking with the register encode to compensate for the 0/1
958 // indexing issue mentioned in a comment in the reg_def sections
959 // for FPR registers many lines above here.
961 if( src_first != FPR1L_num ) {
962 emit_opcode (*cbuf, 0xD9 ); // FLD ST(i)
963 emit_d8 (*cbuf, 0xC0+Matcher::_regEncode[src_first]-1 );
964 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
965 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
966 } else {
967 emit_opcode (*cbuf, 0xDD ); // FST ST(i)
968 emit_d8 (*cbuf, 0xD0+Matcher::_regEncode[dst_first]-1 );
969 }
970 #ifndef PRODUCT
971 } else if( !do_size ) {
972 if( size != 0 ) st->print("\n\t");
973 if( src_first != FPR1L_num ) st->print("FLD %s\n\tFSTP %s",Matcher::regName[src_first],Matcher::regName[dst_first]);
974 else st->print( "FST %s", Matcher::regName[dst_first]);
975 #endif
976 }
977 return size + ((src_first != FPR1L_num) ? 2+2 : 2);
978 }
980 // Check for float store
981 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) {
982 return impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,ra_->reg2offset(dst_first),size, st);
983 }
985 // Check for float load
986 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) {
987 int offset = ra_->reg2offset(src_first);
988 const char *op_str;
989 int op;
990 if( src_first+1 == src_second && dst_first+1 == dst_second ) { // double load?
991 op_str = "FLD_D";
992 op = 0xDD;
993 } else { // 32-bit load
994 op_str = "FLD_S";
995 op = 0xD9;
996 assert( src_second_rc == rc_bad && dst_second_rc == rc_bad, "no non-adjacent float-loads" );
997 }
998 if( cbuf ) {
999 emit_opcode (*cbuf, op );
1000 encode_RegMem(*cbuf, 0x0, ESP_enc, 0x4, 0, offset, false);
1001 emit_opcode (*cbuf, 0xDD ); // FSTP ST(i)
1002 emit_d8 (*cbuf, 0xD8+Matcher::_regEncode[dst_first] );
1003 #ifndef PRODUCT
1004 } else if( !do_size ) {
1005 if( size != 0 ) st->print("\n\t");
1006 st->print("%s ST,[ESP + #%d]\n\tFSTP %s",op_str, offset,Matcher::regName[dst_first]);
1007 #endif
1008 }
1009 int offset_size = (offset == 0) ? 0 : ((offset <= 127) ? 1 : 4);
1010 return size + 3+offset_size+2;
1011 }
1013 // Check for xmm reg-reg copy
1014 if( src_first_rc == rc_xmm && dst_first_rc == rc_xmm ) {
1015 assert( (src_second_rc == rc_bad && dst_second_rc == rc_bad) ||
1016 (src_first+1 == src_second && dst_first+1 == dst_second),
1017 "no non-adjacent float-moves" );
1018 return impl_movx_helper(cbuf,do_size,src_first,dst_first,src_second, dst_second, size, st);
1019 }
1021 // Check for xmm store
1022 if( src_first_rc == rc_xmm && dst_first_rc == rc_stack ) {
1023 return impl_x_helper(cbuf,do_size,false,ra_->reg2offset(dst_first),src_first, src_second, size, st);
1024 }
1026 // Check for float xmm load
1027 if( dst_first_rc == rc_xmm && src_first_rc == rc_stack ) {
1028 return impl_x_helper(cbuf,do_size,true ,ra_->reg2offset(src_first),dst_first, dst_second, size, st);
1029 }
1031 // Copy from float reg to xmm reg
1032 if( dst_first_rc == rc_xmm && src_first_rc == rc_float ) {
1033 // copy to the top of stack from floating point reg
1034 // and use LEA to preserve flags
1035 if( cbuf ) {
1036 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP-8]
1037 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1038 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1039 emit_d8(*cbuf,0xF8);
1040 #ifndef PRODUCT
1041 } else if( !do_size ) {
1042 if( size != 0 ) st->print("\n\t");
1043 st->print("LEA ESP,[ESP-8]");
1044 #endif
1045 }
1046 size += 4;
1048 size = impl_fp_store_helper(cbuf,do_size,src_first,src_second,dst_first,dst_second,0,size, st);
1050 // Copy from the temp memory to the xmm reg.
1051 size = impl_x_helper(cbuf,do_size,true ,0,dst_first, dst_second, size, st);
1053 if( cbuf ) {
1054 emit_opcode(*cbuf,0x8D); // LEA ESP,[ESP+8]
1055 emit_rm(*cbuf, 0x1, ESP_enc, 0x04);
1056 emit_rm(*cbuf, 0x0, 0x04, ESP_enc);
1057 emit_d8(*cbuf,0x08);
1058 #ifndef PRODUCT
1059 } else if( !do_size ) {
1060 if( size != 0 ) st->print("\n\t");
1061 st->print("LEA ESP,[ESP+8]");
1062 #endif
1063 }
1064 size += 4;
1065 return size;
1066 }
1068 assert( size > 0, "missed a case" );
1070 // --------------------------------------------------------------------
1071 // Check for second bits still needing moving.
1072 if( src_second == dst_second )
1073 return size; // Self copy; no move
1074 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" );
1076 // Check for second word int-int move
1077 if( src_second_rc == rc_int && dst_second_rc == rc_int )
1078 return impl_mov_helper(cbuf,do_size,src_second,dst_second,size, st);
1080 // Check for second word integer store
1081 if( src_second_rc == rc_int && dst_second_rc == rc_stack )
1082 return impl_helper(cbuf,do_size,false,ra_->reg2offset(dst_second),src_second,0x89,"MOV ",size, st);
1084 // Check for second word integer load
1085 if( dst_second_rc == rc_int && src_second_rc == rc_stack )
1086 return impl_helper(cbuf,do_size,true ,ra_->reg2offset(src_second),dst_second,0x8B,"MOV ",size, st);
1089 Unimplemented();
1090 }
1092 #ifndef PRODUCT
1093 void MachSpillCopyNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1094 implementation( NULL, ra_, false, st );
1095 }
1096 #endif
1098 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1099 implementation( &cbuf, ra_, false, NULL );
1100 }
1102 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const {
1103 return implementation( NULL, ra_, true, NULL );
1104 }
1106 //=============================================================================
1107 #ifndef PRODUCT
1108 void MachNopNode::format( PhaseRegAlloc *, outputStream* st ) const {
1109 st->print("NOP \t# %d bytes pad for loops and calls", _count);
1110 }
1111 #endif
1113 void MachNopNode::emit(CodeBuffer &cbuf, PhaseRegAlloc * ) const {
1114 MacroAssembler _masm(&cbuf);
1115 __ nop(_count);
1116 }
1118 uint MachNopNode::size(PhaseRegAlloc *) const {
1119 return _count;
1120 }
1123 //=============================================================================
1124 #ifndef PRODUCT
1125 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1126 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1127 int reg = ra_->get_reg_first(this);
1128 st->print("LEA %s,[ESP + #%d]",Matcher::regName[reg],offset);
1129 }
1130 #endif
1132 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1133 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1134 int reg = ra_->get_encode(this);
1135 if( offset >= 128 ) {
1136 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1137 emit_rm(cbuf, 0x2, reg, 0x04);
1138 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1139 emit_d32(cbuf, offset);
1140 }
1141 else {
1142 emit_opcode(cbuf, 0x8D); // LEA reg,[SP+offset]
1143 emit_rm(cbuf, 0x1, reg, 0x04);
1144 emit_rm(cbuf, 0x0, 0x04, ESP_enc);
1145 emit_d8(cbuf, offset);
1146 }
1147 }
1149 uint BoxLockNode::size(PhaseRegAlloc *ra_) const {
1150 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem());
1151 if( offset >= 128 ) {
1152 return 7;
1153 }
1154 else {
1155 return 4;
1156 }
1157 }
1159 //=============================================================================
1161 // emit call stub, compiled java to interpreter
1162 void emit_java_to_interp(CodeBuffer &cbuf ) {
1163 // Stub is fixed up when the corresponding call is converted from calling
1164 // compiled code to calling interpreted code.
1165 // mov rbx,0
1166 // jmp -1
1168 address mark = cbuf.inst_mark(); // get mark within main instrs section
1170 // Note that the code buffer's inst_mark is always relative to insts.
1171 // That's why we must use the macroassembler to generate a stub.
1172 MacroAssembler _masm(&cbuf);
1174 address base =
1175 __ start_a_stub(Compile::MAX_stubs_size);
1176 if (base == NULL) return; // CodeBuffer::expand failed
1177 // static stub relocation stores the instruction address of the call
1178 __ relocate(static_stub_Relocation::spec(mark), RELOC_IMM32);
1179 // static stub relocation also tags the methodOop in the code-stream.
1180 __ movoop(rbx, (jobject)NULL); // method is zapped till fixup time
1181 // This is recognized as unresolved by relocs/nativeInst/ic code
1182 __ jump(RuntimeAddress(__ pc()));
1184 __ end_a_stub();
1185 // Update current stubs pointer and restore code_end.
1186 }
1187 // size of call stub, compiled java to interpretor
1188 uint size_java_to_interp() {
1189 return 10; // movl; jmp
1190 }
1191 // relocation entries for call stub, compiled java to interpretor
1192 uint reloc_java_to_interp() {
1193 return 4; // 3 in emit_java_to_interp + 1 in Java_Static_Call
1194 }
1196 //=============================================================================
1197 #ifndef PRODUCT
1198 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream* st ) const {
1199 st->print_cr( "CMP EAX,[ECX+4]\t# Inline cache check");
1200 st->print_cr("\tJNE SharedRuntime::handle_ic_miss_stub");
1201 st->print_cr("\tNOP");
1202 st->print_cr("\tNOP");
1203 if( !OptoBreakpoint )
1204 st->print_cr("\tNOP");
1205 }
1206 #endif
1208 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const {
1209 MacroAssembler masm(&cbuf);
1210 #ifdef ASSERT
1211 uint code_size = cbuf.code_size();
1212 #endif
1213 masm.cmpptr(rax, Address(rcx, oopDesc::klass_offset_in_bytes()));
1214 masm.jump_cc(Assembler::notEqual,
1215 RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1216 /* WARNING these NOPs are critical so that verified entry point is properly
1217 aligned for patching by NativeJump::patch_verified_entry() */
1218 int nops_cnt = 2;
1219 if( !OptoBreakpoint ) // Leave space for int3
1220 nops_cnt += 1;
1221 masm.nop(nops_cnt);
1223 assert(cbuf.code_size() - code_size == size(ra_), "checking code size of inline cache node");
1224 }
1226 uint MachUEPNode::size(PhaseRegAlloc *ra_) const {
1227 return OptoBreakpoint ? 11 : 12;
1228 }
1231 //=============================================================================
1232 uint size_exception_handler() {
1233 // NativeCall instruction size is the same as NativeJump.
1234 // exception handler starts out as jump and can be patched to
1235 // a call be deoptimization. (4932387)
1236 // Note that this value is also credited (in output.cpp) to
1237 // the size of the code section.
1238 return NativeJump::instruction_size;
1239 }
1241 // Emit exception handler code. Stuff framesize into a register
1242 // and call a VM stub routine.
1243 int emit_exception_handler(CodeBuffer& cbuf) {
1245 // Note that the code buffer's inst_mark is always relative to insts.
1246 // That's why we must use the macroassembler to generate a handler.
1247 MacroAssembler _masm(&cbuf);
1248 address base =
1249 __ start_a_stub(size_exception_handler());
1250 if (base == NULL) return 0; // CodeBuffer::expand failed
1251 int offset = __ offset();
1252 __ jump(RuntimeAddress(OptoRuntime::exception_blob()->instructions_begin()));
1253 assert(__ offset() - offset <= (int) size_exception_handler(), "overflow");
1254 __ end_a_stub();
1255 return offset;
1256 }
1258 uint size_deopt_handler() {
1259 // NativeCall instruction size is the same as NativeJump.
1260 // exception handler starts out as jump and can be patched to
1261 // a call be deoptimization. (4932387)
1262 // Note that this value is also credited (in output.cpp) to
1263 // the size of the code section.
1264 return 5 + NativeJump::instruction_size; // pushl(); jmp;
1265 }
1267 // Emit deopt handler code.
1268 int emit_deopt_handler(CodeBuffer& cbuf) {
1270 // Note that the code buffer's inst_mark is always relative to insts.
1271 // That's why we must use the macroassembler to generate a handler.
1272 MacroAssembler _masm(&cbuf);
1273 address base =
1274 __ start_a_stub(size_exception_handler());
1275 if (base == NULL) return 0; // CodeBuffer::expand failed
1276 int offset = __ offset();
1277 InternalAddress here(__ pc());
1278 __ pushptr(here.addr());
1280 __ jump(RuntimeAddress(SharedRuntime::deopt_blob()->unpack()));
1281 assert(__ offset() - offset <= (int) size_deopt_handler(), "overflow");
1282 __ end_a_stub();
1283 return offset;
1284 }
1287 static void emit_double_constant(CodeBuffer& cbuf, double x) {
1288 int mark = cbuf.insts()->mark_off();
1289 MacroAssembler _masm(&cbuf);
1290 address double_address = __ double_constant(x);
1291 cbuf.insts()->set_mark_off(mark); // preserve mark across masm shift
1292 emit_d32_reloc(cbuf,
1293 (int)double_address,
1294 internal_word_Relocation::spec(double_address),
1295 RELOC_DISP32);
1296 }
1298 static void emit_float_constant(CodeBuffer& cbuf, float x) {
1299 int mark = cbuf.insts()->mark_off();
1300 MacroAssembler _masm(&cbuf);
1301 address float_address = __ float_constant(x);
1302 cbuf.insts()->set_mark_off(mark); // preserve mark across masm shift
1303 emit_d32_reloc(cbuf,
1304 (int)float_address,
1305 internal_word_Relocation::spec(float_address),
1306 RELOC_DISP32);
1307 }
1310 const bool Matcher::match_rule_supported(int opcode) {
1311 if (!has_match_rule(opcode))
1312 return false;
1314 return true; // Per default match rules are supported.
1315 }
1317 int Matcher::regnum_to_fpu_offset(int regnum) {
1318 return regnum - 32; // The FP registers are in the second chunk
1319 }
1321 bool is_positive_zero_float(jfloat f) {
1322 return jint_cast(f) == jint_cast(0.0F);
1323 }
1325 bool is_positive_one_float(jfloat f) {
1326 return jint_cast(f) == jint_cast(1.0F);
1327 }
1329 bool is_positive_zero_double(jdouble d) {
1330 return jlong_cast(d) == jlong_cast(0.0);
1331 }
1333 bool is_positive_one_double(jdouble d) {
1334 return jlong_cast(d) == jlong_cast(1.0);
1335 }
1337 // This is UltraSparc specific, true just means we have fast l2f conversion
1338 const bool Matcher::convL2FSupported(void) {
1339 return true;
1340 }
1342 // Vector width in bytes
1343 const uint Matcher::vector_width_in_bytes(void) {
1344 return UseSSE >= 2 ? 8 : 0;
1345 }
1347 // Vector ideal reg
1348 const uint Matcher::vector_ideal_reg(void) {
1349 return Op_RegD;
1350 }
1352 // Is this branch offset short enough that a short branch can be used?
1353 //
1354 // NOTE: If the platform does not provide any short branch variants, then
1355 // this method should return false for offset 0.
1356 bool Matcher::is_short_branch_offset(int rule, int offset) {
1357 // the short version of jmpConUCF2 contains multiple branches,
1358 // making the reach slightly less
1359 if (rule == jmpConUCF2_rule)
1360 return (-126 <= offset && offset <= 125);
1361 return (-128 <= offset && offset <= 127);
1362 }
1364 const bool Matcher::isSimpleConstant64(jlong value) {
1365 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?.
1366 return false;
1367 }
1369 // The ecx parameter to rep stos for the ClearArray node is in dwords.
1370 const bool Matcher::init_array_count_is_in_bytes = false;
1372 // Threshold size for cleararray.
1373 const int Matcher::init_array_short_size = 8 * BytesPerLong;
1375 // Should the Matcher clone shifts on addressing modes, expecting them to
1376 // be subsumed into complex addressing expressions or compute them into
1377 // registers? True for Intel but false for most RISCs
1378 const bool Matcher::clone_shift_expressions = true;
1380 bool Matcher::narrow_oop_use_complex_address() {
1381 ShouldNotCallThis();
1382 return true;
1383 }
1386 // Is it better to copy float constants, or load them directly from memory?
1387 // Intel can load a float constant from a direct address, requiring no
1388 // extra registers. Most RISCs will have to materialize an address into a
1389 // register first, so they would do better to copy the constant from stack.
1390 const bool Matcher::rematerialize_float_constants = true;
1392 // If CPU can load and store mis-aligned doubles directly then no fixup is
1393 // needed. Else we split the double into 2 integer pieces and move it
1394 // piece-by-piece. Only happens when passing doubles into C code as the
1395 // Java calling convention forces doubles to be aligned.
1396 const bool Matcher::misaligned_doubles_ok = true;
1399 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) {
1400 // Get the memory operand from the node
1401 uint numopnds = node->num_opnds(); // Virtual call for number of operands
1402 uint skipped = node->oper_input_base(); // Sum of leaves skipped so far
1403 assert( idx >= skipped, "idx too low in pd_implicit_null_fixup" );
1404 uint opcnt = 1; // First operand
1405 uint num_edges = node->_opnds[1]->num_edges(); // leaves for first operand
1406 while( idx >= skipped+num_edges ) {
1407 skipped += num_edges;
1408 opcnt++; // Bump operand count
1409 assert( opcnt < numopnds, "Accessing non-existent operand" );
1410 num_edges = node->_opnds[opcnt]->num_edges(); // leaves for next operand
1411 }
1413 MachOper *memory = node->_opnds[opcnt];
1414 MachOper *new_memory = NULL;
1415 switch (memory->opcode()) {
1416 case DIRECT:
1417 case INDOFFSET32X:
1418 // No transformation necessary.
1419 return;
1420 case INDIRECT:
1421 new_memory = new (C) indirect_win95_safeOper( );
1422 break;
1423 case INDOFFSET8:
1424 new_memory = new (C) indOffset8_win95_safeOper(memory->disp(NULL, NULL, 0));
1425 break;
1426 case INDOFFSET32:
1427 new_memory = new (C) indOffset32_win95_safeOper(memory->disp(NULL, NULL, 0));
1428 break;
1429 case INDINDEXOFFSET:
1430 new_memory = new (C) indIndexOffset_win95_safeOper(memory->disp(NULL, NULL, 0));
1431 break;
1432 case INDINDEXSCALE:
1433 new_memory = new (C) indIndexScale_win95_safeOper(memory->scale());
1434 break;
1435 case INDINDEXSCALEOFFSET:
1436 new_memory = new (C) indIndexScaleOffset_win95_safeOper(memory->scale(), memory->disp(NULL, NULL, 0));
1437 break;
1438 case LOAD_LONG_INDIRECT:
1439 case LOAD_LONG_INDOFFSET32:
1440 // Does not use EBP as address register, use { EDX, EBX, EDI, ESI}
1441 return;
1442 default:
1443 assert(false, "unexpected memory operand in pd_implicit_null_fixup()");
1444 return;
1445 }
1446 node->_opnds[opcnt] = new_memory;
1447 }
1449 // Advertise here if the CPU requires explicit rounding operations
1450 // to implement the UseStrictFP mode.
1451 const bool Matcher::strict_fp_requires_explicit_rounding = true;
1453 // Are floats conerted to double when stored to stack during deoptimization?
1454 // On x32 it is stored with convertion only when FPU is used for floats.
1455 bool Matcher::float_in_double() { return (UseSSE == 0); }
1457 // Do ints take an entire long register or just half?
1458 const bool Matcher::int_in_long = false;
1460 // Return whether or not this register is ever used as an argument. This
1461 // function is used on startup to build the trampoline stubs in generateOptoStub.
1462 // Registers not mentioned will be killed by the VM call in the trampoline, and
1463 // arguments in those registers not be available to the callee.
1464 bool Matcher::can_be_java_arg( int reg ) {
1465 if( reg == ECX_num || reg == EDX_num ) return true;
1466 if( (reg == XMM0a_num || reg == XMM1a_num) && UseSSE>=1 ) return true;
1467 if( (reg == XMM0b_num || reg == XMM1b_num) && UseSSE>=2 ) return true;
1468 return false;
1469 }
1471 bool Matcher::is_spillable_arg( int reg ) {
1472 return can_be_java_arg(reg);
1473 }
1475 // Register for DIVI projection of divmodI
1476 RegMask Matcher::divI_proj_mask() {
1477 return EAX_REG_mask;
1478 }
1480 // Register for MODI projection of divmodI
1481 RegMask Matcher::modI_proj_mask() {
1482 return EDX_REG_mask;
1483 }
1485 // Register for DIVL projection of divmodL
1486 RegMask Matcher::divL_proj_mask() {
1487 ShouldNotReachHere();
1488 return RegMask();
1489 }
1491 // Register for MODL projection of divmodL
1492 RegMask Matcher::modL_proj_mask() {
1493 ShouldNotReachHere();
1494 return RegMask();
1495 }
1497 const RegMask Matcher::method_handle_invoke_SP_save_mask() {
1498 return EBP_REG_mask;
1499 }
1501 // Returns true if the high 32 bits of the value is known to be zero.
1502 bool is_operand_hi32_zero(Node* n) {
1503 int opc = n->Opcode();
1504 if (opc == Op_LoadUI2L) {
1505 return true;
1506 }
1507 if (opc == Op_AndL) {
1508 Node* o2 = n->in(2);
1509 if (o2->is_Con() && (o2->get_long() & 0xFFFFFFFF00000000LL) == 0LL) {
1510 return true;
1511 }
1512 }
1513 return false;
1514 }
1516 %}
1518 //----------ENCODING BLOCK-----------------------------------------------------
1519 // This block specifies the encoding classes used by the compiler to output
1520 // byte streams. Encoding classes generate functions which are called by
1521 // Machine Instruction Nodes in order to generate the bit encoding of the
1522 // instruction. Operands specify their base encoding interface with the
1523 // interface keyword. There are currently supported four interfaces,
1524 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an
1525 // operand to generate a function which returns its register number when
1526 // queried. CONST_INTER causes an operand to generate a function which
1527 // returns the value of the constant when queried. MEMORY_INTER causes an
1528 // operand to generate four functions which return the Base Register, the
1529 // Index Register, the Scale Value, and the Offset Value of the operand when
1530 // queried. COND_INTER causes an operand to generate six functions which
1531 // return the encoding code (ie - encoding bits for the instruction)
1532 // associated with each basic boolean condition for a conditional instruction.
1533 // Instructions specify two basic values for encoding. They use the
1534 // ins_encode keyword to specify their encoding class (which must be one of
1535 // the class names specified in the encoding block), and they use the
1536 // opcode keyword to specify, in order, their primary, secondary, and
1537 // tertiary opcode. Only the opcode sections which a particular instruction
1538 // needs for encoding need to be specified.
1539 encode %{
1540 // Build emit functions for each basic byte or larger field in the intel
1541 // encoding scheme (opcode, rm, sib, immediate), and call them from C++
1542 // code in the enc_class source block. Emit functions will live in the
1543 // main source block for now. In future, we can generalize this by
1544 // adding a syntax that specifies the sizes of fields in an order,
1545 // so that the adlc can build the emit functions automagically
1547 // Emit primary opcode
1548 enc_class OpcP %{
1549 emit_opcode(cbuf, $primary);
1550 %}
1552 // Emit secondary opcode
1553 enc_class OpcS %{
1554 emit_opcode(cbuf, $secondary);
1555 %}
1557 // Emit opcode directly
1558 enc_class Opcode(immI d8) %{
1559 emit_opcode(cbuf, $d8$$constant);
1560 %}
1562 enc_class SizePrefix %{
1563 emit_opcode(cbuf,0x66);
1564 %}
1566 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
1567 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1568 %}
1570 enc_class OpcRegReg (immI opcode, eRegI dst, eRegI src) %{ // OpcRegReg(Many)
1571 emit_opcode(cbuf,$opcode$$constant);
1572 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
1573 %}
1575 enc_class mov_r32_imm0( eRegI dst ) %{
1576 emit_opcode( cbuf, 0xB8 + $dst$$reg ); // 0xB8+ rd -- MOV r32 ,imm32
1577 emit_d32 ( cbuf, 0x0 ); // imm32==0x0
1578 %}
1580 enc_class cdq_enc %{
1581 // Full implementation of Java idiv and irem; checks for
1582 // special case as described in JVM spec., p.243 & p.271.
1583 //
1584 // normal case special case
1585 //
1586 // input : rax,: dividend min_int
1587 // reg: divisor -1
1588 //
1589 // output: rax,: quotient (= rax, idiv reg) min_int
1590 // rdx: remainder (= rax, irem reg) 0
1591 //
1592 // Code sequnce:
1593 //
1594 // 81 F8 00 00 00 80 cmp rax,80000000h
1595 // 0F 85 0B 00 00 00 jne normal_case
1596 // 33 D2 xor rdx,edx
1597 // 83 F9 FF cmp rcx,0FFh
1598 // 0F 84 03 00 00 00 je done
1599 // normal_case:
1600 // 99 cdq
1601 // F7 F9 idiv rax,ecx
1602 // done:
1603 //
1604 emit_opcode(cbuf,0x81); emit_d8(cbuf,0xF8);
1605 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00);
1606 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x80); // cmp rax,80000000h
1607 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x85);
1608 emit_opcode(cbuf,0x0B); emit_d8(cbuf,0x00);
1609 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // jne normal_case
1610 emit_opcode(cbuf,0x33); emit_d8(cbuf,0xD2); // xor rdx,edx
1611 emit_opcode(cbuf,0x83); emit_d8(cbuf,0xF9); emit_d8(cbuf,0xFF); // cmp rcx,0FFh
1612 emit_opcode(cbuf,0x0F); emit_d8(cbuf,0x84);
1613 emit_opcode(cbuf,0x03); emit_d8(cbuf,0x00);
1614 emit_opcode(cbuf,0x00); emit_d8(cbuf,0x00); // je done
1615 // normal_case:
1616 emit_opcode(cbuf,0x99); // cdq
1617 // idiv (note: must be emitted by the user of this rule)
1618 // normal:
1619 %}
1621 // Dense encoding for older common ops
1622 enc_class Opc_plus(immI opcode, eRegI reg) %{
1623 emit_opcode(cbuf, $opcode$$constant + $reg$$reg);
1624 %}
1627 // Opcde enc_class for 8/32 bit immediate instructions with sign-extension
1628 enc_class OpcSE (immI imm) %{ // Emit primary opcode and set sign-extend bit
1629 // Check for 8-bit immediate, and set sign extend bit in opcode
1630 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1631 emit_opcode(cbuf, $primary | 0x02);
1632 }
1633 else { // If 32-bit immediate
1634 emit_opcode(cbuf, $primary);
1635 }
1636 %}
1638 enc_class OpcSErm (eRegI dst, immI imm) %{ // OpcSEr/m
1639 // Emit primary opcode and set sign-extend bit
1640 // Check for 8-bit immediate, and set sign extend bit in opcode
1641 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1642 emit_opcode(cbuf, $primary | 0x02); }
1643 else { // If 32-bit immediate
1644 emit_opcode(cbuf, $primary);
1645 }
1646 // Emit r/m byte with secondary opcode, after primary opcode.
1647 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1648 %}
1650 enc_class Con8or32 (immI imm) %{ // Con8or32(storeImmI), 8 or 32 bits
1651 // Check for 8-bit immediate, and set sign extend bit in opcode
1652 if (($imm$$constant >= -128) && ($imm$$constant <= 127)) {
1653 $$$emit8$imm$$constant;
1654 }
1655 else { // If 32-bit immediate
1656 // Output immediate
1657 $$$emit32$imm$$constant;
1658 }
1659 %}
1661 enc_class Long_OpcSErm_Lo(eRegL dst, immL imm) %{
1662 // Emit primary opcode and set sign-extend bit
1663 // Check for 8-bit immediate, and set sign extend bit in opcode
1664 int con = (int)$imm$$constant; // Throw away top bits
1665 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1666 // Emit r/m byte with secondary opcode, after primary opcode.
1667 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1668 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1669 else emit_d32(cbuf,con);
1670 %}
1672 enc_class Long_OpcSErm_Hi(eRegL dst, immL imm) %{
1673 // Emit primary opcode and set sign-extend bit
1674 // Check for 8-bit immediate, and set sign extend bit in opcode
1675 int con = (int)($imm$$constant >> 32); // Throw away bottom bits
1676 emit_opcode(cbuf, ((con >= -128) && (con <= 127)) ? ($primary | 0x02) : $primary);
1677 // Emit r/m byte with tertiary opcode, after primary opcode.
1678 emit_rm(cbuf, 0x3, $tertiary, HIGH_FROM_LOW($dst$$reg));
1679 if ((con >= -128) && (con <= 127)) emit_d8 (cbuf,con);
1680 else emit_d32(cbuf,con);
1681 %}
1683 enc_class Lbl (label labl) %{ // JMP, CALL
1684 Label *l = $labl$$label;
1685 emit_d32(cbuf, l ? (l->loc_pos() - (cbuf.code_size()+4)) : 0);
1686 %}
1688 enc_class LblShort (label labl) %{ // JMP, CALL
1689 Label *l = $labl$$label;
1690 int disp = l ? (l->loc_pos() - (cbuf.code_size()+1)) : 0;
1691 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1692 emit_d8(cbuf, disp);
1693 %}
1695 enc_class OpcSReg (eRegI dst) %{ // BSWAP
1696 emit_cc(cbuf, $secondary, $dst$$reg );
1697 %}
1699 enc_class bswap_long_bytes(eRegL dst) %{ // BSWAP
1700 int destlo = $dst$$reg;
1701 int desthi = HIGH_FROM_LOW(destlo);
1702 // bswap lo
1703 emit_opcode(cbuf, 0x0F);
1704 emit_cc(cbuf, 0xC8, destlo);
1705 // bswap hi
1706 emit_opcode(cbuf, 0x0F);
1707 emit_cc(cbuf, 0xC8, desthi);
1708 // xchg lo and hi
1709 emit_opcode(cbuf, 0x87);
1710 emit_rm(cbuf, 0x3, destlo, desthi);
1711 %}
1713 enc_class RegOpc (eRegI div) %{ // IDIV, IMOD, JMP indirect, ...
1714 emit_rm(cbuf, 0x3, $secondary, $div$$reg );
1715 %}
1717 enc_class Jcc (cmpOp cop, label labl) %{ // JCC
1718 Label *l = $labl$$label;
1719 $$$emit8$primary;
1720 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1721 emit_d32(cbuf, l ? (l->loc_pos() - (cbuf.code_size()+4)) : 0);
1722 %}
1724 enc_class JccShort (cmpOp cop, label labl) %{ // JCC
1725 Label *l = $labl$$label;
1726 emit_cc(cbuf, $primary, $cop$$cmpcode);
1727 int disp = l ? (l->loc_pos() - (cbuf.code_size()+1)) : 0;
1728 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
1729 emit_d8(cbuf, disp);
1730 %}
1732 enc_class enc_cmov(cmpOp cop ) %{ // CMOV
1733 $$$emit8$primary;
1734 emit_cc(cbuf, $secondary, $cop$$cmpcode);
1735 %}
1737 enc_class enc_cmov_d(cmpOp cop, regD src ) %{ // CMOV
1738 int op = 0xDA00 + $cop$$cmpcode + ($src$$reg-1);
1739 emit_d8(cbuf, op >> 8 );
1740 emit_d8(cbuf, op & 255);
1741 %}
1743 // emulate a CMOV with a conditional branch around a MOV
1744 enc_class enc_cmov_branch( cmpOp cop, immI brOffs ) %{ // CMOV
1745 // Invert sense of branch from sense of CMOV
1746 emit_cc( cbuf, 0x70, ($cop$$cmpcode^1) );
1747 emit_d8( cbuf, $brOffs$$constant );
1748 %}
1750 enc_class enc_PartialSubtypeCheck( ) %{
1751 Register Redi = as_Register(EDI_enc); // result register
1752 Register Reax = as_Register(EAX_enc); // super class
1753 Register Recx = as_Register(ECX_enc); // killed
1754 Register Resi = as_Register(ESI_enc); // sub class
1755 Label miss;
1757 MacroAssembler _masm(&cbuf);
1758 __ check_klass_subtype_slow_path(Resi, Reax, Recx, Redi,
1759 NULL, &miss,
1760 /*set_cond_codes:*/ true);
1761 if ($primary) {
1762 __ xorptr(Redi, Redi);
1763 }
1764 __ bind(miss);
1765 %}
1767 enc_class FFree_Float_Stack_All %{ // Free_Float_Stack_All
1768 MacroAssembler masm(&cbuf);
1769 int start = masm.offset();
1770 if (UseSSE >= 2) {
1771 if (VerifyFPU) {
1772 masm.verify_FPU(0, "must be empty in SSE2+ mode");
1773 }
1774 } else {
1775 // External c_calling_convention expects the FPU stack to be 'clean'.
1776 // Compiled code leaves it dirty. Do cleanup now.
1777 masm.empty_FPU_stack();
1778 }
1779 if (sizeof_FFree_Float_Stack_All == -1) {
1780 sizeof_FFree_Float_Stack_All = masm.offset() - start;
1781 } else {
1782 assert(masm.offset() - start == sizeof_FFree_Float_Stack_All, "wrong size");
1783 }
1784 %}
1786 enc_class Verify_FPU_For_Leaf %{
1787 if( VerifyFPU ) {
1788 MacroAssembler masm(&cbuf);
1789 masm.verify_FPU( -3, "Returning from Runtime Leaf call");
1790 }
1791 %}
1793 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime, Java_To_Runtime_Leaf
1794 // This is the instruction starting address for relocation info.
1795 cbuf.set_inst_mark();
1796 $$$emit8$primary;
1797 // CALL directly to the runtime
1798 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.code_end()) - 4),
1799 runtime_call_Relocation::spec(), RELOC_IMM32 );
1801 if (UseSSE >= 2) {
1802 MacroAssembler _masm(&cbuf);
1803 BasicType rt = tf()->return_type();
1805 if ((rt == T_FLOAT || rt == T_DOUBLE) && !return_value_is_used()) {
1806 // A C runtime call where the return value is unused. In SSE2+
1807 // mode the result needs to be removed from the FPU stack. It's
1808 // likely that this function call could be removed by the
1809 // optimizer if the C function is a pure function.
1810 __ ffree(0);
1811 } else if (rt == T_FLOAT) {
1812 __ lea(rsp, Address(rsp, -4));
1813 __ fstp_s(Address(rsp, 0));
1814 __ movflt(xmm0, Address(rsp, 0));
1815 __ lea(rsp, Address(rsp, 4));
1816 } else if (rt == T_DOUBLE) {
1817 __ lea(rsp, Address(rsp, -8));
1818 __ fstp_d(Address(rsp, 0));
1819 __ movdbl(xmm0, Address(rsp, 0));
1820 __ lea(rsp, Address(rsp, 8));
1821 }
1822 }
1823 %}
1826 enc_class pre_call_FPU %{
1827 // If method sets FPU control word restore it here
1828 debug_only(int off0 = cbuf.code_size());
1829 if( Compile::current()->in_24_bit_fp_mode() ) {
1830 MacroAssembler masm(&cbuf);
1831 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std()));
1832 }
1833 debug_only(int off1 = cbuf.code_size());
1834 assert(off1 - off0 == pre_call_FPU_size(), "correct size prediction");
1835 %}
1837 enc_class post_call_FPU %{
1838 // If method sets FPU control word do it here also
1839 if( Compile::current()->in_24_bit_fp_mode() ) {
1840 MacroAssembler masm(&cbuf);
1841 masm.fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_24()));
1842 }
1843 %}
1845 enc_class preserve_SP %{
1846 debug_only(int off0 = cbuf.code_size());
1847 MacroAssembler _masm(&cbuf);
1848 // RBP is preserved across all calls, even compiled calls.
1849 // Use it to preserve RSP in places where the callee might change the SP.
1850 __ movptr(rbp_mh_SP_save, rsp);
1851 debug_only(int off1 = cbuf.code_size());
1852 assert(off1 - off0 == preserve_SP_size(), "correct size prediction");
1853 %}
1855 enc_class restore_SP %{
1856 MacroAssembler _masm(&cbuf);
1857 __ movptr(rsp, rbp_mh_SP_save);
1858 %}
1860 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL
1861 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1862 // who we intended to call.
1863 cbuf.set_inst_mark();
1864 $$$emit8$primary;
1865 if ( !_method ) {
1866 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.code_end()) - 4),
1867 runtime_call_Relocation::spec(), RELOC_IMM32 );
1868 } else if(_optimized_virtual) {
1869 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.code_end()) - 4),
1870 opt_virtual_call_Relocation::spec(), RELOC_IMM32 );
1871 } else {
1872 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.code_end()) - 4),
1873 static_call_Relocation::spec(), RELOC_IMM32 );
1874 }
1875 if( _method ) { // Emit stub for static call
1876 emit_java_to_interp(cbuf);
1877 }
1878 %}
1880 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL
1881 // !!!!!
1882 // Generate "Mov EAX,0x00", placeholder instruction to load oop-info
1883 // emit_call_dynamic_prologue( cbuf );
1884 cbuf.set_inst_mark();
1885 emit_opcode(cbuf, 0xB8 + EAX_enc); // mov EAX,-1
1886 emit_d32_reloc(cbuf, (int)Universe::non_oop_word(), oop_Relocation::spec_for_immediate(), RELOC_IMM32);
1887 address virtual_call_oop_addr = cbuf.inst_mark();
1888 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine
1889 // who we intended to call.
1890 cbuf.set_inst_mark();
1891 $$$emit8$primary;
1892 emit_d32_reloc(cbuf, ($meth$$method - (int)(cbuf.code_end()) - 4),
1893 virtual_call_Relocation::spec(virtual_call_oop_addr), RELOC_IMM32 );
1894 %}
1896 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL
1897 int disp = in_bytes(methodOopDesc::from_compiled_offset());
1898 assert( -128 <= disp && disp <= 127, "compiled_code_offset isn't small");
1900 // CALL *[EAX+in_bytes(methodOopDesc::from_compiled_code_entry_point_offset())]
1901 cbuf.set_inst_mark();
1902 $$$emit8$primary;
1903 emit_rm(cbuf, 0x01, $secondary, EAX_enc ); // R/M byte
1904 emit_d8(cbuf, disp); // Displacement
1906 %}
1908 enc_class Xor_Reg (eRegI dst) %{
1909 emit_opcode(cbuf, 0x33);
1910 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
1911 %}
1913 // Following encoding is no longer used, but may be restored if calling
1914 // convention changes significantly.
1915 // Became: Xor_Reg(EBP), Java_To_Runtime( labl )
1916 //
1917 // enc_class Java_Interpreter_Call (label labl) %{ // JAVA INTERPRETER CALL
1918 // // int ic_reg = Matcher::inline_cache_reg();
1919 // // int ic_encode = Matcher::_regEncode[ic_reg];
1920 // // int imo_reg = Matcher::interpreter_method_oop_reg();
1921 // // int imo_encode = Matcher::_regEncode[imo_reg];
1922 //
1923 // // // Interpreter expects method_oop in EBX, currently a callee-saved register,
1924 // // // so we load it immediately before the call
1925 // // emit_opcode(cbuf, 0x8B); // MOV imo_reg,ic_reg # method_oop
1926 // // emit_rm(cbuf, 0x03, imo_encode, ic_encode ); // R/M byte
1927 //
1928 // // xor rbp,ebp
1929 // emit_opcode(cbuf, 0x33);
1930 // emit_rm(cbuf, 0x3, EBP_enc, EBP_enc);
1931 //
1932 // // CALL to interpreter.
1933 // cbuf.set_inst_mark();
1934 // $$$emit8$primary;
1935 // emit_d32_reloc(cbuf, ($labl$$label - (int)(cbuf.code_end()) - 4),
1936 // runtime_call_Relocation::spec(), RELOC_IMM32 );
1937 // %}
1939 enc_class RegOpcImm (eRegI dst, immI8 shift) %{ // SHL, SAR, SHR
1940 $$$emit8$primary;
1941 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
1942 $$$emit8$shift$$constant;
1943 %}
1945 enc_class LdImmI (eRegI dst, immI src) %{ // Load Immediate
1946 // Load immediate does not have a zero or sign extended version
1947 // for 8-bit immediates
1948 emit_opcode(cbuf, 0xB8 + $dst$$reg);
1949 $$$emit32$src$$constant;
1950 %}
1952 enc_class LdImmP (eRegI dst, immI src) %{ // Load Immediate
1953 // Load immediate does not have a zero or sign extended version
1954 // for 8-bit immediates
1955 emit_opcode(cbuf, $primary + $dst$$reg);
1956 $$$emit32$src$$constant;
1957 %}
1959 enc_class LdImmL_Lo( eRegL dst, immL src) %{ // Load Immediate
1960 // Load immediate does not have a zero or sign extended version
1961 // for 8-bit immediates
1962 int dst_enc = $dst$$reg;
1963 int src_con = $src$$constant & 0x0FFFFFFFFL;
1964 if (src_con == 0) {
1965 // xor dst, dst
1966 emit_opcode(cbuf, 0x33);
1967 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1968 } else {
1969 emit_opcode(cbuf, $primary + dst_enc);
1970 emit_d32(cbuf, src_con);
1971 }
1972 %}
1974 enc_class LdImmL_Hi( eRegL dst, immL src) %{ // Load Immediate
1975 // Load immediate does not have a zero or sign extended version
1976 // for 8-bit immediates
1977 int dst_enc = $dst$$reg + 2;
1978 int src_con = ((julong)($src$$constant)) >> 32;
1979 if (src_con == 0) {
1980 // xor dst, dst
1981 emit_opcode(cbuf, 0x33);
1982 emit_rm(cbuf, 0x3, dst_enc, dst_enc);
1983 } else {
1984 emit_opcode(cbuf, $primary + dst_enc);
1985 emit_d32(cbuf, src_con);
1986 }
1987 %}
1990 enc_class LdImmD (immD src) %{ // Load Immediate
1991 if( is_positive_zero_double($src$$constant)) {
1992 // FLDZ
1993 emit_opcode(cbuf,0xD9);
1994 emit_opcode(cbuf,0xEE);
1995 } else if( is_positive_one_double($src$$constant)) {
1996 // FLD1
1997 emit_opcode(cbuf,0xD9);
1998 emit_opcode(cbuf,0xE8);
1999 } else {
2000 emit_opcode(cbuf,0xDD);
2001 emit_rm(cbuf, 0x0, 0x0, 0x5);
2002 emit_double_constant(cbuf, $src$$constant);
2003 }
2004 %}
2007 enc_class LdImmF (immF src) %{ // Load Immediate
2008 if( is_positive_zero_float($src$$constant)) {
2009 emit_opcode(cbuf,0xD9);
2010 emit_opcode(cbuf,0xEE);
2011 } else if( is_positive_one_float($src$$constant)) {
2012 emit_opcode(cbuf,0xD9);
2013 emit_opcode(cbuf,0xE8);
2014 } else {
2015 $$$emit8$primary;
2016 // Load immediate does not have a zero or sign extended version
2017 // for 8-bit immediates
2018 // First load to TOS, then move to dst
2019 emit_rm(cbuf, 0x0, 0x0, 0x5);
2020 emit_float_constant(cbuf, $src$$constant);
2021 }
2022 %}
2024 enc_class LdImmX (regX dst, immXF con) %{ // Load Immediate
2025 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2026 emit_float_constant(cbuf, $con$$constant);
2027 %}
2029 enc_class LdImmXD (regXD dst, immXD con) %{ // Load Immediate
2030 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2031 emit_double_constant(cbuf, $con$$constant);
2032 %}
2034 enc_class load_conXD (regXD dst, immXD con) %{ // Load double constant
2035 // UseXmmLoadAndClearUpper ? movsd(dst, con) : movlpd(dst, con)
2036 emit_opcode(cbuf, UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
2037 emit_opcode(cbuf, 0x0F);
2038 emit_opcode(cbuf, UseXmmLoadAndClearUpper ? 0x10 : 0x12);
2039 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
2040 emit_double_constant(cbuf, $con$$constant);
2041 %}
2043 enc_class Opc_MemImm_F(immF src) %{
2044 cbuf.set_inst_mark();
2045 $$$emit8$primary;
2046 emit_rm(cbuf, 0x0, $secondary, 0x5);
2047 emit_float_constant(cbuf, $src$$constant);
2048 %}
2051 enc_class MovI2X_reg(regX dst, eRegI src) %{
2052 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2053 emit_opcode(cbuf, 0x0F );
2054 emit_opcode(cbuf, 0x6E );
2055 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2056 %}
2058 enc_class MovX2I_reg(eRegI dst, regX src) %{
2059 emit_opcode(cbuf, 0x66 ); // MOVD dst,src
2060 emit_opcode(cbuf, 0x0F );
2061 emit_opcode(cbuf, 0x7E );
2062 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2063 %}
2065 enc_class MovL2XD_reg(regXD dst, eRegL src, regXD tmp) %{
2066 { // MOVD $dst,$src.lo
2067 emit_opcode(cbuf,0x66);
2068 emit_opcode(cbuf,0x0F);
2069 emit_opcode(cbuf,0x6E);
2070 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2071 }
2072 { // MOVD $tmp,$src.hi
2073 emit_opcode(cbuf,0x66);
2074 emit_opcode(cbuf,0x0F);
2075 emit_opcode(cbuf,0x6E);
2076 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
2077 }
2078 { // PUNPCKLDQ $dst,$tmp
2079 emit_opcode(cbuf,0x66);
2080 emit_opcode(cbuf,0x0F);
2081 emit_opcode(cbuf,0x62);
2082 emit_rm(cbuf, 0x3, $dst$$reg, $tmp$$reg);
2083 }
2084 %}
2086 enc_class MovXD2L_reg(eRegL dst, regXD src, regXD tmp) %{
2087 { // MOVD $dst.lo,$src
2088 emit_opcode(cbuf,0x66);
2089 emit_opcode(cbuf,0x0F);
2090 emit_opcode(cbuf,0x7E);
2091 emit_rm(cbuf, 0x3, $src$$reg, $dst$$reg);
2092 }
2093 { // PSHUFLW $tmp,$src,0x4E (01001110b)
2094 emit_opcode(cbuf,0xF2);
2095 emit_opcode(cbuf,0x0F);
2096 emit_opcode(cbuf,0x70);
2097 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
2098 emit_d8(cbuf, 0x4E);
2099 }
2100 { // MOVD $dst.hi,$tmp
2101 emit_opcode(cbuf,0x66);
2102 emit_opcode(cbuf,0x0F);
2103 emit_opcode(cbuf,0x7E);
2104 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
2105 }
2106 %}
2109 // Encode a reg-reg copy. If it is useless, then empty encoding.
2110 enc_class enc_Copy( eRegI dst, eRegI src ) %{
2111 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2112 %}
2114 enc_class enc_CopyL_Lo( eRegI dst, eRegL src ) %{
2115 encode_Copy( cbuf, $dst$$reg, $src$$reg );
2116 %}
2118 // Encode xmm reg-reg copy. If it is useless, then empty encoding.
2119 enc_class enc_CopyXD( RegXD dst, RegXD src ) %{
2120 encode_CopyXD( cbuf, $dst$$reg, $src$$reg );
2121 %}
2123 enc_class RegReg (eRegI dst, eRegI src) %{ // RegReg(Many)
2124 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2125 %}
2127 enc_class RegReg_Lo(eRegL dst, eRegL src) %{ // RegReg(Many)
2128 $$$emit8$primary;
2129 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2130 %}
2132 enc_class RegReg_Hi(eRegL dst, eRegL src) %{ // RegReg(Many)
2133 $$$emit8$secondary;
2134 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2135 %}
2137 enc_class RegReg_Lo2(eRegL dst, eRegL src) %{ // RegReg(Many)
2138 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2139 %}
2141 enc_class RegReg_Hi2(eRegL dst, eRegL src) %{ // RegReg(Many)
2142 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg));
2143 %}
2145 enc_class RegReg_HiLo( eRegL src, eRegI dst ) %{
2146 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($src$$reg));
2147 %}
2149 enc_class Con32 (immI src) %{ // Con32(storeImmI)
2150 // Output immediate
2151 $$$emit32$src$$constant;
2152 %}
2154 enc_class Con32F_as_bits(immF src) %{ // storeF_imm
2155 // Output Float immediate bits
2156 jfloat jf = $src$$constant;
2157 int jf_as_bits = jint_cast( jf );
2158 emit_d32(cbuf, jf_as_bits);
2159 %}
2161 enc_class Con32XF_as_bits(immXF src) %{ // storeX_imm
2162 // Output Float immediate bits
2163 jfloat jf = $src$$constant;
2164 int jf_as_bits = jint_cast( jf );
2165 emit_d32(cbuf, jf_as_bits);
2166 %}
2168 enc_class Con16 (immI src) %{ // Con16(storeImmI)
2169 // Output immediate
2170 $$$emit16$src$$constant;
2171 %}
2173 enc_class Con_d32(immI src) %{
2174 emit_d32(cbuf,$src$$constant);
2175 %}
2177 enc_class conmemref (eRegP t1) %{ // Con32(storeImmI)
2178 // Output immediate memory reference
2179 emit_rm(cbuf, 0x00, $t1$$reg, 0x05 );
2180 emit_d32(cbuf, 0x00);
2181 %}
2183 enc_class lock_prefix( ) %{
2184 if( os::is_MP() )
2185 emit_opcode(cbuf,0xF0); // [Lock]
2186 %}
2188 // Cmp-xchg long value.
2189 // Note: we need to swap rbx, and rcx before and after the
2190 // cmpxchg8 instruction because the instruction uses
2191 // rcx as the high order word of the new value to store but
2192 // our register encoding uses rbx,.
2193 enc_class enc_cmpxchg8(eSIRegP mem_ptr) %{
2195 // XCHG rbx,ecx
2196 emit_opcode(cbuf,0x87);
2197 emit_opcode(cbuf,0xD9);
2198 // [Lock]
2199 if( os::is_MP() )
2200 emit_opcode(cbuf,0xF0);
2201 // CMPXCHG8 [Eptr]
2202 emit_opcode(cbuf,0x0F);
2203 emit_opcode(cbuf,0xC7);
2204 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2205 // XCHG rbx,ecx
2206 emit_opcode(cbuf,0x87);
2207 emit_opcode(cbuf,0xD9);
2208 %}
2210 enc_class enc_cmpxchg(eSIRegP mem_ptr) %{
2211 // [Lock]
2212 if( os::is_MP() )
2213 emit_opcode(cbuf,0xF0);
2215 // CMPXCHG [Eptr]
2216 emit_opcode(cbuf,0x0F);
2217 emit_opcode(cbuf,0xB1);
2218 emit_rm( cbuf, 0x0, 1, $mem_ptr$$reg );
2219 %}
2221 enc_class enc_flags_ne_to_boolean( iRegI res ) %{
2222 int res_encoding = $res$$reg;
2224 // MOV res,0
2225 emit_opcode( cbuf, 0xB8 + res_encoding);
2226 emit_d32( cbuf, 0 );
2227 // JNE,s fail
2228 emit_opcode(cbuf,0x75);
2229 emit_d8(cbuf, 5 );
2230 // MOV res,1
2231 emit_opcode( cbuf, 0xB8 + res_encoding);
2232 emit_d32( cbuf, 1 );
2233 // fail:
2234 %}
2236 enc_class set_instruction_start( ) %{
2237 cbuf.set_inst_mark(); // Mark start of opcode for reloc info in mem operand
2238 %}
2240 enc_class RegMem (eRegI ereg, memory mem) %{ // emit_reg_mem
2241 int reg_encoding = $ereg$$reg;
2242 int base = $mem$$base;
2243 int index = $mem$$index;
2244 int scale = $mem$$scale;
2245 int displace = $mem$$disp;
2246 bool disp_is_oop = $mem->disp_is_oop();
2247 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2248 %}
2250 enc_class RegMem_Hi(eRegL ereg, memory mem) %{ // emit_reg_mem
2251 int reg_encoding = HIGH_FROM_LOW($ereg$$reg); // Hi register of pair, computed from lo
2252 int base = $mem$$base;
2253 int index = $mem$$index;
2254 int scale = $mem$$scale;
2255 int displace = $mem$$disp + 4; // Offset is 4 further in memory
2256 assert( !$mem->disp_is_oop(), "Cannot add 4 to oop" );
2257 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, false/*disp_is_oop*/);
2258 %}
2260 enc_class move_long_small_shift( eRegL dst, immI_1_31 cnt ) %{
2261 int r1, r2;
2262 if( $tertiary == 0xA4 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2263 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2264 emit_opcode(cbuf,0x0F);
2265 emit_opcode(cbuf,$tertiary);
2266 emit_rm(cbuf, 0x3, r1, r2);
2267 emit_d8(cbuf,$cnt$$constant);
2268 emit_d8(cbuf,$primary);
2269 emit_rm(cbuf, 0x3, $secondary, r1);
2270 emit_d8(cbuf,$cnt$$constant);
2271 %}
2273 enc_class move_long_big_shift_sign( eRegL dst, immI_32_63 cnt ) %{
2274 emit_opcode( cbuf, 0x8B ); // Move
2275 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2276 emit_d8(cbuf,$primary);
2277 emit_rm(cbuf, 0x3, $secondary, $dst$$reg);
2278 emit_d8(cbuf,$cnt$$constant-32);
2279 emit_d8(cbuf,$primary);
2280 emit_rm(cbuf, 0x3, $secondary, HIGH_FROM_LOW($dst$$reg));
2281 emit_d8(cbuf,31);
2282 %}
2284 enc_class move_long_big_shift_clr( eRegL dst, immI_32_63 cnt ) %{
2285 int r1, r2;
2286 if( $secondary == 0x5 ) { r1 = $dst$$reg; r2 = HIGH_FROM_LOW($dst$$reg); }
2287 else { r2 = $dst$$reg; r1 = HIGH_FROM_LOW($dst$$reg); }
2289 emit_opcode( cbuf, 0x8B ); // Move r1,r2
2290 emit_rm(cbuf, 0x3, r1, r2);
2291 if( $cnt$$constant > 32 ) { // Shift, if not by zero
2292 emit_opcode(cbuf,$primary);
2293 emit_rm(cbuf, 0x3, $secondary, r1);
2294 emit_d8(cbuf,$cnt$$constant-32);
2295 }
2296 emit_opcode(cbuf,0x33); // XOR r2,r2
2297 emit_rm(cbuf, 0x3, r2, r2);
2298 %}
2300 // Clone of RegMem but accepts an extra parameter to access each
2301 // half of a double in memory; it never needs relocation info.
2302 enc_class Mov_MemD_half_to_Reg (immI opcode, memory mem, immI disp_for_half, eRegI rm_reg) %{
2303 emit_opcode(cbuf,$opcode$$constant);
2304 int reg_encoding = $rm_reg$$reg;
2305 int base = $mem$$base;
2306 int index = $mem$$index;
2307 int scale = $mem$$scale;
2308 int displace = $mem$$disp + $disp_for_half$$constant;
2309 bool disp_is_oop = false;
2310 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2311 %}
2313 // !!!!! Special Custom Code used by MemMove, and stack access instructions !!!!!
2314 //
2315 // Clone of RegMem except the RM-byte's reg/opcode field is an ADLC-time constant
2316 // and it never needs relocation information.
2317 // Frequently used to move data between FPU's Stack Top and memory.
2318 enc_class RMopc_Mem_no_oop (immI rm_opcode, memory mem) %{
2319 int rm_byte_opcode = $rm_opcode$$constant;
2320 int base = $mem$$base;
2321 int index = $mem$$index;
2322 int scale = $mem$$scale;
2323 int displace = $mem$$disp;
2324 assert( !$mem->disp_is_oop(), "No oops here because no relo info allowed" );
2325 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, false);
2326 %}
2328 enc_class RMopc_Mem (immI rm_opcode, memory mem) %{
2329 int rm_byte_opcode = $rm_opcode$$constant;
2330 int base = $mem$$base;
2331 int index = $mem$$index;
2332 int scale = $mem$$scale;
2333 int displace = $mem$$disp;
2334 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2335 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
2336 %}
2338 enc_class RegLea (eRegI dst, eRegI src0, immI src1 ) %{ // emit_reg_lea
2339 int reg_encoding = $dst$$reg;
2340 int base = $src0$$reg; // 0xFFFFFFFF indicates no base
2341 int index = 0x04; // 0x04 indicates no index
2342 int scale = 0x00; // 0x00 indicates no scale
2343 int displace = $src1$$constant; // 0x00 indicates no displacement
2344 bool disp_is_oop = false;
2345 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2346 %}
2348 enc_class min_enc (eRegI dst, eRegI src) %{ // MIN
2349 // Compare dst,src
2350 emit_opcode(cbuf,0x3B);
2351 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2352 // jmp dst < src around move
2353 emit_opcode(cbuf,0x7C);
2354 emit_d8(cbuf,2);
2355 // move dst,src
2356 emit_opcode(cbuf,0x8B);
2357 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2358 %}
2360 enc_class max_enc (eRegI dst, eRegI src) %{ // MAX
2361 // Compare dst,src
2362 emit_opcode(cbuf,0x3B);
2363 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2364 // jmp dst > src around move
2365 emit_opcode(cbuf,0x7F);
2366 emit_d8(cbuf,2);
2367 // move dst,src
2368 emit_opcode(cbuf,0x8B);
2369 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
2370 %}
2372 enc_class enc_FP_store(memory mem, regD src) %{
2373 // If src is FPR1, we can just FST to store it.
2374 // Else we need to FLD it to FPR1, then FSTP to store/pop it.
2375 int reg_encoding = 0x2; // Just store
2376 int base = $mem$$base;
2377 int index = $mem$$index;
2378 int scale = $mem$$scale;
2379 int displace = $mem$$disp;
2380 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
2381 if( $src$$reg != FPR1L_enc ) {
2382 reg_encoding = 0x3; // Store & pop
2383 emit_opcode( cbuf, 0xD9 ); // FLD (i.e., push it)
2384 emit_d8( cbuf, 0xC0-1+$src$$reg );
2385 }
2386 cbuf.set_inst_mark(); // Mark start of opcode for reloc info in mem operand
2387 emit_opcode(cbuf,$primary);
2388 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2389 %}
2391 enc_class neg_reg(eRegI dst) %{
2392 // NEG $dst
2393 emit_opcode(cbuf,0xF7);
2394 emit_rm(cbuf, 0x3, 0x03, $dst$$reg );
2395 %}
2397 enc_class setLT_reg(eCXRegI dst) %{
2398 // SETLT $dst
2399 emit_opcode(cbuf,0x0F);
2400 emit_opcode(cbuf,0x9C);
2401 emit_rm( cbuf, 0x3, 0x4, $dst$$reg );
2402 %}
2404 enc_class enc_cmpLTP(ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp) %{ // cadd_cmpLT
2405 int tmpReg = $tmp$$reg;
2407 // SUB $p,$q
2408 emit_opcode(cbuf,0x2B);
2409 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2410 // SBB $tmp,$tmp
2411 emit_opcode(cbuf,0x1B);
2412 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2413 // AND $tmp,$y
2414 emit_opcode(cbuf,0x23);
2415 emit_rm(cbuf, 0x3, tmpReg, $y$$reg);
2416 // ADD $p,$tmp
2417 emit_opcode(cbuf,0x03);
2418 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2419 %}
2421 enc_class enc_cmpLTP_mem(eRegI p, eRegI q, memory mem, eCXRegI tmp) %{ // cadd_cmpLT
2422 int tmpReg = $tmp$$reg;
2424 // SUB $p,$q
2425 emit_opcode(cbuf,0x2B);
2426 emit_rm(cbuf, 0x3, $p$$reg, $q$$reg);
2427 // SBB $tmp,$tmp
2428 emit_opcode(cbuf,0x1B);
2429 emit_rm(cbuf, 0x3, tmpReg, tmpReg);
2430 // AND $tmp,$y
2431 cbuf.set_inst_mark(); // Mark start of opcode for reloc info in mem operand
2432 emit_opcode(cbuf,0x23);
2433 int reg_encoding = tmpReg;
2434 int base = $mem$$base;
2435 int index = $mem$$index;
2436 int scale = $mem$$scale;
2437 int displace = $mem$$disp;
2438 bool disp_is_oop = $mem->disp_is_oop();
2439 encode_RegMem(cbuf, reg_encoding, base, index, scale, displace, disp_is_oop);
2440 // ADD $p,$tmp
2441 emit_opcode(cbuf,0x03);
2442 emit_rm(cbuf, 0x3, $p$$reg, tmpReg);
2443 %}
2445 enc_class shift_left_long( eRegL dst, eCXRegI shift ) %{
2446 // TEST shift,32
2447 emit_opcode(cbuf,0xF7);
2448 emit_rm(cbuf, 0x3, 0, ECX_enc);
2449 emit_d32(cbuf,0x20);
2450 // JEQ,s small
2451 emit_opcode(cbuf, 0x74);
2452 emit_d8(cbuf, 0x04);
2453 // MOV $dst.hi,$dst.lo
2454 emit_opcode( cbuf, 0x8B );
2455 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
2456 // CLR $dst.lo
2457 emit_opcode(cbuf, 0x33);
2458 emit_rm(cbuf, 0x3, $dst$$reg, $dst$$reg);
2459 // small:
2460 // SHLD $dst.hi,$dst.lo,$shift
2461 emit_opcode(cbuf,0x0F);
2462 emit_opcode(cbuf,0xA5);
2463 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg));
2464 // SHL $dst.lo,$shift"
2465 emit_opcode(cbuf,0xD3);
2466 emit_rm(cbuf, 0x3, 0x4, $dst$$reg );
2467 %}
2469 enc_class shift_right_long( eRegL dst, eCXRegI shift ) %{
2470 // TEST shift,32
2471 emit_opcode(cbuf,0xF7);
2472 emit_rm(cbuf, 0x3, 0, ECX_enc);
2473 emit_d32(cbuf,0x20);
2474 // JEQ,s small
2475 emit_opcode(cbuf, 0x74);
2476 emit_d8(cbuf, 0x04);
2477 // MOV $dst.lo,$dst.hi
2478 emit_opcode( cbuf, 0x8B );
2479 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2480 // CLR $dst.hi
2481 emit_opcode(cbuf, 0x33);
2482 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($dst$$reg));
2483 // small:
2484 // SHRD $dst.lo,$dst.hi,$shift
2485 emit_opcode(cbuf,0x0F);
2486 emit_opcode(cbuf,0xAD);
2487 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2488 // SHR $dst.hi,$shift"
2489 emit_opcode(cbuf,0xD3);
2490 emit_rm(cbuf, 0x3, 0x5, HIGH_FROM_LOW($dst$$reg) );
2491 %}
2493 enc_class shift_right_arith_long( eRegL dst, eCXRegI shift ) %{
2494 // TEST shift,32
2495 emit_opcode(cbuf,0xF7);
2496 emit_rm(cbuf, 0x3, 0, ECX_enc);
2497 emit_d32(cbuf,0x20);
2498 // JEQ,s small
2499 emit_opcode(cbuf, 0x74);
2500 emit_d8(cbuf, 0x05);
2501 // MOV $dst.lo,$dst.hi
2502 emit_opcode( cbuf, 0x8B );
2503 emit_rm(cbuf, 0x3, $dst$$reg, HIGH_FROM_LOW($dst$$reg) );
2504 // SAR $dst.hi,31
2505 emit_opcode(cbuf, 0xC1);
2506 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW($dst$$reg) );
2507 emit_d8(cbuf, 0x1F );
2508 // small:
2509 // SHRD $dst.lo,$dst.hi,$shift
2510 emit_opcode(cbuf,0x0F);
2511 emit_opcode(cbuf,0xAD);
2512 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg);
2513 // SAR $dst.hi,$shift"
2514 emit_opcode(cbuf,0xD3);
2515 emit_rm(cbuf, 0x3, 0x7, HIGH_FROM_LOW($dst$$reg) );
2516 %}
2519 // ----------------- Encodings for floating point unit -----------------
2520 // May leave result in FPU-TOS or FPU reg depending on opcodes
2521 enc_class OpcReg_F (regF src) %{ // FMUL, FDIV
2522 $$$emit8$primary;
2523 emit_rm(cbuf, 0x3, $secondary, $src$$reg );
2524 %}
2526 // Pop argument in FPR0 with FSTP ST(0)
2527 enc_class PopFPU() %{
2528 emit_opcode( cbuf, 0xDD );
2529 emit_d8( cbuf, 0xD8 );
2530 %}
2532 // !!!!! equivalent to Pop_Reg_F
2533 enc_class Pop_Reg_D( regD dst ) %{
2534 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2535 emit_d8( cbuf, 0xD8+$dst$$reg );
2536 %}
2538 enc_class Push_Reg_D( regD dst ) %{
2539 emit_opcode( cbuf, 0xD9 );
2540 emit_d8( cbuf, 0xC0-1+$dst$$reg ); // FLD ST(i-1)
2541 %}
2543 enc_class strictfp_bias1( regD dst ) %{
2544 emit_opcode( cbuf, 0xDB ); // FLD m80real
2545 emit_opcode( cbuf, 0x2D );
2546 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias1() );
2547 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2548 emit_opcode( cbuf, 0xC8+$dst$$reg );
2549 %}
2551 enc_class strictfp_bias2( regD dst ) %{
2552 emit_opcode( cbuf, 0xDB ); // FLD m80real
2553 emit_opcode( cbuf, 0x2D );
2554 emit_d32( cbuf, (int)StubRoutines::addr_fpu_subnormal_bias2() );
2555 emit_opcode( cbuf, 0xDE ); // FMULP ST(dst), ST0
2556 emit_opcode( cbuf, 0xC8+$dst$$reg );
2557 %}
2559 // Special case for moving an integer register to a stack slot.
2560 enc_class OpcPRegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2561 store_to_stackslot( cbuf, $primary, $src$$reg, $dst$$disp );
2562 %}
2564 // Special case for moving a register to a stack slot.
2565 enc_class RegSS( stackSlotI dst, eRegI src ) %{ // RegSS
2566 // Opcode already emitted
2567 emit_rm( cbuf, 0x02, $src$$reg, ESP_enc ); // R/M byte
2568 emit_rm( cbuf, 0x00, ESP_enc, ESP_enc); // SIB byte
2569 emit_d32(cbuf, $dst$$disp); // Displacement
2570 %}
2572 // Push the integer in stackSlot 'src' onto FP-stack
2573 enc_class Push_Mem_I( memory src ) %{ // FILD [ESP+src]
2574 store_to_stackslot( cbuf, $primary, $secondary, $src$$disp );
2575 %}
2577 // Push the float in stackSlot 'src' onto FP-stack
2578 enc_class Push_Mem_F( memory src ) %{ // FLD_S [ESP+src]
2579 store_to_stackslot( cbuf, 0xD9, 0x00, $src$$disp );
2580 %}
2582 // Push the double in stackSlot 'src' onto FP-stack
2583 enc_class Push_Mem_D( memory src ) %{ // FLD_D [ESP+src]
2584 store_to_stackslot( cbuf, 0xDD, 0x00, $src$$disp );
2585 %}
2587 // Push FPU's TOS float to a stack-slot, and pop FPU-stack
2588 enc_class Pop_Mem_F( stackSlotF dst ) %{ // FSTP_S [ESP+dst]
2589 store_to_stackslot( cbuf, 0xD9, 0x03, $dst$$disp );
2590 %}
2592 // Same as Pop_Mem_F except for opcode
2593 // Push FPU's TOS double to a stack-slot, and pop FPU-stack
2594 enc_class Pop_Mem_D( stackSlotD dst ) %{ // FSTP_D [ESP+dst]
2595 store_to_stackslot( cbuf, 0xDD, 0x03, $dst$$disp );
2596 %}
2598 enc_class Pop_Reg_F( regF dst ) %{
2599 emit_opcode( cbuf, 0xDD ); // FSTP ST(i)
2600 emit_d8( cbuf, 0xD8+$dst$$reg );
2601 %}
2603 enc_class Push_Reg_F( regF dst ) %{
2604 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2605 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2606 %}
2608 // Push FPU's float to a stack-slot, and pop FPU-stack
2609 enc_class Pop_Mem_Reg_F( stackSlotF dst, regF src ) %{
2610 int pop = 0x02;
2611 if ($src$$reg != FPR1L_enc) {
2612 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2613 emit_d8( cbuf, 0xC0-1+$src$$reg );
2614 pop = 0x03;
2615 }
2616 store_to_stackslot( cbuf, 0xD9, pop, $dst$$disp ); // FST<P>_S [ESP+dst]
2617 %}
2619 // Push FPU's double to a stack-slot, and pop FPU-stack
2620 enc_class Pop_Mem_Reg_D( stackSlotD dst, regD src ) %{
2621 int pop = 0x02;
2622 if ($src$$reg != FPR1L_enc) {
2623 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
2624 emit_d8( cbuf, 0xC0-1+$src$$reg );
2625 pop = 0x03;
2626 }
2627 store_to_stackslot( cbuf, 0xDD, pop, $dst$$disp ); // FST<P>_D [ESP+dst]
2628 %}
2630 // Push FPU's double to a FPU-stack-slot, and pop FPU-stack
2631 enc_class Pop_Reg_Reg_D( regD dst, regF src ) %{
2632 int pop = 0xD0 - 1; // -1 since we skip FLD
2633 if ($src$$reg != FPR1L_enc) {
2634 emit_opcode( cbuf, 0xD9 ); // FLD ST(src-1)
2635 emit_d8( cbuf, 0xC0-1+$src$$reg );
2636 pop = 0xD8;
2637 }
2638 emit_opcode( cbuf, 0xDD );
2639 emit_d8( cbuf, pop+$dst$$reg ); // FST<P> ST(i)
2640 %}
2643 enc_class Mul_Add_F( regF dst, regF src, regF src1, regF src2 ) %{
2644 MacroAssembler masm(&cbuf);
2645 masm.fld_s( $src1$$reg-1); // nothing at TOS, load TOS from src1.reg
2646 masm.fmul( $src2$$reg+0); // value at TOS
2647 masm.fadd( $src$$reg+0); // value at TOS
2648 masm.fstp_d( $dst$$reg+0); // value at TOS, popped off after store
2649 %}
2652 enc_class Push_Reg_Mod_D( regD dst, regD src) %{
2653 // load dst in FPR0
2654 emit_opcode( cbuf, 0xD9 );
2655 emit_d8( cbuf, 0xC0-1+$dst$$reg );
2656 if ($src$$reg != FPR1L_enc) {
2657 // fincstp
2658 emit_opcode (cbuf, 0xD9);
2659 emit_opcode (cbuf, 0xF7);
2660 // swap src with FPR1:
2661 // FXCH FPR1 with src
2662 emit_opcode(cbuf, 0xD9);
2663 emit_d8(cbuf, 0xC8-1+$src$$reg );
2664 // fdecstp
2665 emit_opcode (cbuf, 0xD9);
2666 emit_opcode (cbuf, 0xF6);
2667 }
2668 %}
2670 enc_class Push_ModD_encoding( regXD src0, regXD src1) %{
2671 // Allocate a word
2672 emit_opcode(cbuf,0x83); // SUB ESP,8
2673 emit_opcode(cbuf,0xEC);
2674 emit_d8(cbuf,0x08);
2676 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src1
2677 emit_opcode (cbuf, 0x0F );
2678 emit_opcode (cbuf, 0x11 );
2679 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2681 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2682 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2684 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src0
2685 emit_opcode (cbuf, 0x0F );
2686 emit_opcode (cbuf, 0x11 );
2687 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2689 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2690 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2692 %}
2694 enc_class Push_ModX_encoding( regX src0, regX src1) %{
2695 // Allocate a word
2696 emit_opcode(cbuf,0x83); // SUB ESP,4
2697 emit_opcode(cbuf,0xEC);
2698 emit_d8(cbuf,0x04);
2700 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src1
2701 emit_opcode (cbuf, 0x0F );
2702 emit_opcode (cbuf, 0x11 );
2703 encode_RegMem(cbuf, $src1$$reg, ESP_enc, 0x4, 0, 0, false);
2705 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2706 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2708 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src0
2709 emit_opcode (cbuf, 0x0F );
2710 emit_opcode (cbuf, 0x11 );
2711 encode_RegMem(cbuf, $src0$$reg, ESP_enc, 0x4, 0, 0, false);
2713 emit_opcode(cbuf,0xD9 ); // FLD [ESP]
2714 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2716 %}
2718 enc_class Push_ResultXD(regXD dst) %{
2719 store_to_stackslot( cbuf, 0xDD, 0x03, 0 ); //FSTP [ESP]
2721 // UseXmmLoadAndClearUpper ? movsd dst,[esp] : movlpd dst,[esp]
2722 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
2723 emit_opcode (cbuf, 0x0F );
2724 emit_opcode (cbuf, UseXmmLoadAndClearUpper ? 0x10 : 0x12);
2725 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2727 emit_opcode(cbuf,0x83); // ADD ESP,8
2728 emit_opcode(cbuf,0xC4);
2729 emit_d8(cbuf,0x08);
2730 %}
2732 enc_class Push_ResultX(regX dst, immI d8) %{
2733 store_to_stackslot( cbuf, 0xD9, 0x03, 0 ); //FSTP_S [ESP]
2735 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
2736 emit_opcode (cbuf, 0x0F );
2737 emit_opcode (cbuf, 0x10 );
2738 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
2740 emit_opcode(cbuf,0x83); // ADD ESP,d8 (4 or 8)
2741 emit_opcode(cbuf,0xC4);
2742 emit_d8(cbuf,$d8$$constant);
2743 %}
2745 enc_class Push_SrcXD(regXD src) %{
2746 // Allocate a word
2747 emit_opcode(cbuf,0x83); // SUB ESP,8
2748 emit_opcode(cbuf,0xEC);
2749 emit_d8(cbuf,0x08);
2751 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
2752 emit_opcode (cbuf, 0x0F );
2753 emit_opcode (cbuf, 0x11 );
2754 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
2756 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2757 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2758 %}
2760 enc_class push_stack_temp_qword() %{
2761 emit_opcode(cbuf,0x83); // SUB ESP,8
2762 emit_opcode(cbuf,0xEC);
2763 emit_d8 (cbuf,0x08);
2764 %}
2766 enc_class pop_stack_temp_qword() %{
2767 emit_opcode(cbuf,0x83); // ADD ESP,8
2768 emit_opcode(cbuf,0xC4);
2769 emit_d8 (cbuf,0x08);
2770 %}
2772 enc_class push_xmm_to_fpr1( regXD xmm_src ) %{
2773 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], xmm_src
2774 emit_opcode (cbuf, 0x0F );
2775 emit_opcode (cbuf, 0x11 );
2776 encode_RegMem(cbuf, $xmm_src$$reg, ESP_enc, 0x4, 0, 0, false);
2778 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
2779 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2780 %}
2782 // Compute X^Y using Intel's fast hardware instructions, if possible.
2783 // Otherwise return a NaN.
2784 enc_class pow_exp_core_encoding %{
2785 // FPR1 holds Y*ln2(X). Compute FPR1 = 2^(Y*ln2(X))
2786 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xC0); // fdup = fld st(0) Q Q
2787 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xFC); // frndint int(Q) Q
2788 emit_opcode(cbuf,0xDC); emit_opcode(cbuf,0xE9); // fsub st(1) -= st(0); int(Q) frac(Q)
2789 emit_opcode(cbuf,0xDB); // FISTP [ESP] frac(Q)
2790 emit_opcode(cbuf,0x1C);
2791 emit_d8(cbuf,0x24);
2792 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xF0); // f2xm1 2^frac(Q)-1
2793 emit_opcode(cbuf,0xD9); emit_opcode(cbuf,0xE8); // fld1 1 2^frac(Q)-1
2794 emit_opcode(cbuf,0xDE); emit_opcode(cbuf,0xC1); // faddp 2^frac(Q)
2795 emit_opcode(cbuf,0x8B); // mov rax,[esp+0]=int(Q)
2796 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 0, false);
2797 emit_opcode(cbuf,0xC7); // mov rcx,0xFFFFF800 - overflow mask
2798 emit_rm(cbuf, 0x3, 0x0, ECX_enc);
2799 emit_d32(cbuf,0xFFFFF800);
2800 emit_opcode(cbuf,0x81); // add rax,1023 - the double exponent bias
2801 emit_rm(cbuf, 0x3, 0x0, EAX_enc);
2802 emit_d32(cbuf,1023);
2803 emit_opcode(cbuf,0x8B); // mov rbx,eax
2804 emit_rm(cbuf, 0x3, EBX_enc, EAX_enc);
2805 emit_opcode(cbuf,0xC1); // shl rax,20 - Slide to exponent position
2806 emit_rm(cbuf,0x3,0x4,EAX_enc);
2807 emit_d8(cbuf,20);
2808 emit_opcode(cbuf,0x85); // test rbx,ecx - check for overflow
2809 emit_rm(cbuf, 0x3, EBX_enc, ECX_enc);
2810 emit_opcode(cbuf,0x0F); emit_opcode(cbuf,0x45); // CMOVne rax,ecx - overflow; stuff NAN into EAX
2811 emit_rm(cbuf, 0x3, EAX_enc, ECX_enc);
2812 emit_opcode(cbuf,0x89); // mov [esp+4],eax - Store as part of double word
2813 encode_RegMem(cbuf, EAX_enc, ESP_enc, 0x4, 0, 4, false);
2814 emit_opcode(cbuf,0xC7); // mov [esp+0],0 - [ESP] = (double)(1<<int(Q)) = 2^int(Q)
2815 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
2816 emit_d32(cbuf,0);
2817 emit_opcode(cbuf,0xDC); // fmul dword st(0),[esp+0]; FPR1 = 2^int(Q)*2^frac(Q) = 2^Q
2818 encode_RegMem(cbuf, 0x1, ESP_enc, 0x4, 0, 0, false);
2819 %}
2821 // enc_class Pop_Reg_Mod_D( regD dst, regD src)
2822 // was replaced by Push_Result_Mod_D followed by Pop_Reg_X() or Pop_Mem_X()
2824 enc_class Push_Result_Mod_D( regD src) %{
2825 if ($src$$reg != FPR1L_enc) {
2826 // fincstp
2827 emit_opcode (cbuf, 0xD9);
2828 emit_opcode (cbuf, 0xF7);
2829 // FXCH FPR1 with src
2830 emit_opcode(cbuf, 0xD9);
2831 emit_d8(cbuf, 0xC8-1+$src$$reg );
2832 // fdecstp
2833 emit_opcode (cbuf, 0xD9);
2834 emit_opcode (cbuf, 0xF6);
2835 }
2836 // // following asm replaced with Pop_Reg_F or Pop_Mem_F
2837 // // FSTP FPR$dst$$reg
2838 // emit_opcode( cbuf, 0xDD );
2839 // emit_d8( cbuf, 0xD8+$dst$$reg );
2840 %}
2842 enc_class fnstsw_sahf_skip_parity() %{
2843 // fnstsw ax
2844 emit_opcode( cbuf, 0xDF );
2845 emit_opcode( cbuf, 0xE0 );
2846 // sahf
2847 emit_opcode( cbuf, 0x9E );
2848 // jnp ::skip
2849 emit_opcode( cbuf, 0x7B );
2850 emit_opcode( cbuf, 0x05 );
2851 %}
2853 enc_class emitModD() %{
2854 // fprem must be iterative
2855 // :: loop
2856 // fprem
2857 emit_opcode( cbuf, 0xD9 );
2858 emit_opcode( cbuf, 0xF8 );
2859 // wait
2860 emit_opcode( cbuf, 0x9b );
2861 // fnstsw ax
2862 emit_opcode( cbuf, 0xDF );
2863 emit_opcode( cbuf, 0xE0 );
2864 // sahf
2865 emit_opcode( cbuf, 0x9E );
2866 // jp ::loop
2867 emit_opcode( cbuf, 0x0F );
2868 emit_opcode( cbuf, 0x8A );
2869 emit_opcode( cbuf, 0xF4 );
2870 emit_opcode( cbuf, 0xFF );
2871 emit_opcode( cbuf, 0xFF );
2872 emit_opcode( cbuf, 0xFF );
2873 %}
2875 enc_class fpu_flags() %{
2876 // fnstsw_ax
2877 emit_opcode( cbuf, 0xDF);
2878 emit_opcode( cbuf, 0xE0);
2879 // test ax,0x0400
2880 emit_opcode( cbuf, 0x66 ); // operand-size prefix for 16-bit immediate
2881 emit_opcode( cbuf, 0xA9 );
2882 emit_d16 ( cbuf, 0x0400 );
2883 // // // This sequence works, but stalls for 12-16 cycles on PPro
2884 // // test rax,0x0400
2885 // emit_opcode( cbuf, 0xA9 );
2886 // emit_d32 ( cbuf, 0x00000400 );
2887 //
2888 // jz exit (no unordered comparison)
2889 emit_opcode( cbuf, 0x74 );
2890 emit_d8 ( cbuf, 0x02 );
2891 // mov ah,1 - treat as LT case (set carry flag)
2892 emit_opcode( cbuf, 0xB4 );
2893 emit_d8 ( cbuf, 0x01 );
2894 // sahf
2895 emit_opcode( cbuf, 0x9E);
2896 %}
2898 enc_class cmpF_P6_fixup() %{
2899 // Fixup the integer flags in case comparison involved a NaN
2900 //
2901 // JNP exit (no unordered comparison, P-flag is set by NaN)
2902 emit_opcode( cbuf, 0x7B );
2903 emit_d8 ( cbuf, 0x03 );
2904 // MOV AH,1 - treat as LT case (set carry flag)
2905 emit_opcode( cbuf, 0xB4 );
2906 emit_d8 ( cbuf, 0x01 );
2907 // SAHF
2908 emit_opcode( cbuf, 0x9E);
2909 // NOP // target for branch to avoid branch to branch
2910 emit_opcode( cbuf, 0x90);
2911 %}
2913 // fnstsw_ax();
2914 // sahf();
2915 // movl(dst, nan_result);
2916 // jcc(Assembler::parity, exit);
2917 // movl(dst, less_result);
2918 // jcc(Assembler::below, exit);
2919 // movl(dst, equal_result);
2920 // jcc(Assembler::equal, exit);
2921 // movl(dst, greater_result);
2923 // less_result = 1;
2924 // greater_result = -1;
2925 // equal_result = 0;
2926 // nan_result = -1;
2928 enc_class CmpF_Result(eRegI dst) %{
2929 // fnstsw_ax();
2930 emit_opcode( cbuf, 0xDF);
2931 emit_opcode( cbuf, 0xE0);
2932 // sahf
2933 emit_opcode( cbuf, 0x9E);
2934 // movl(dst, nan_result);
2935 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2936 emit_d32( cbuf, -1 );
2937 // jcc(Assembler::parity, exit);
2938 emit_opcode( cbuf, 0x7A );
2939 emit_d8 ( cbuf, 0x13 );
2940 // movl(dst, less_result);
2941 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2942 emit_d32( cbuf, -1 );
2943 // jcc(Assembler::below, exit);
2944 emit_opcode( cbuf, 0x72 );
2945 emit_d8 ( cbuf, 0x0C );
2946 // movl(dst, equal_result);
2947 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2948 emit_d32( cbuf, 0 );
2949 // jcc(Assembler::equal, exit);
2950 emit_opcode( cbuf, 0x74 );
2951 emit_d8 ( cbuf, 0x05 );
2952 // movl(dst, greater_result);
2953 emit_opcode( cbuf, 0xB8 + $dst$$reg);
2954 emit_d32( cbuf, 1 );
2955 %}
2958 // XMM version of CmpF_Result. Because the XMM compare
2959 // instructions set the EFLAGS directly. It becomes simpler than
2960 // the float version above.
2961 enc_class CmpX_Result(eRegI dst) %{
2962 MacroAssembler _masm(&cbuf);
2963 Label nan, inc, done;
2965 __ jccb(Assembler::parity, nan);
2966 __ jccb(Assembler::equal, done);
2967 __ jccb(Assembler::above, inc);
2968 __ bind(nan);
2969 __ decrement(as_Register($dst$$reg)); // NO L qqq
2970 __ jmpb(done);
2971 __ bind(inc);
2972 __ increment(as_Register($dst$$reg)); // NO L qqq
2973 __ bind(done);
2974 %}
2976 // Compare the longs and set flags
2977 // BROKEN! Do Not use as-is
2978 enc_class cmpl_test( eRegL src1, eRegL src2 ) %{
2979 // CMP $src1.hi,$src2.hi
2980 emit_opcode( cbuf, 0x3B );
2981 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
2982 // JNE,s done
2983 emit_opcode(cbuf,0x75);
2984 emit_d8(cbuf, 2 );
2985 // CMP $src1.lo,$src2.lo
2986 emit_opcode( cbuf, 0x3B );
2987 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
2988 // done:
2989 %}
2991 enc_class convert_int_long( regL dst, eRegI src ) %{
2992 // mov $dst.lo,$src
2993 int dst_encoding = $dst$$reg;
2994 int src_encoding = $src$$reg;
2995 encode_Copy( cbuf, dst_encoding , src_encoding );
2996 // mov $dst.hi,$src
2997 encode_Copy( cbuf, HIGH_FROM_LOW(dst_encoding), src_encoding );
2998 // sar $dst.hi,31
2999 emit_opcode( cbuf, 0xC1 );
3000 emit_rm(cbuf, 0x3, 7, HIGH_FROM_LOW(dst_encoding) );
3001 emit_d8(cbuf, 0x1F );
3002 %}
3004 enc_class convert_long_double( eRegL src ) %{
3005 // push $src.hi
3006 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
3007 // push $src.lo
3008 emit_opcode(cbuf, 0x50+$src$$reg );
3009 // fild 64-bits at [SP]
3010 emit_opcode(cbuf,0xdf);
3011 emit_d8(cbuf, 0x6C);
3012 emit_d8(cbuf, 0x24);
3013 emit_d8(cbuf, 0x00);
3014 // pop stack
3015 emit_opcode(cbuf, 0x83); // add SP, #8
3016 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3017 emit_d8(cbuf, 0x8);
3018 %}
3020 enc_class multiply_con_and_shift_high( eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr ) %{
3021 // IMUL EDX:EAX,$src1
3022 emit_opcode( cbuf, 0xF7 );
3023 emit_rm( cbuf, 0x3, 0x5, $src1$$reg );
3024 // SAR EDX,$cnt-32
3025 int shift_count = ((int)$cnt$$constant) - 32;
3026 if (shift_count > 0) {
3027 emit_opcode(cbuf, 0xC1);
3028 emit_rm(cbuf, 0x3, 7, $dst$$reg );
3029 emit_d8(cbuf, shift_count);
3030 }
3031 %}
3033 // this version doesn't have add sp, 8
3034 enc_class convert_long_double2( eRegL src ) %{
3035 // push $src.hi
3036 emit_opcode(cbuf, 0x50+HIGH_FROM_LOW($src$$reg));
3037 // push $src.lo
3038 emit_opcode(cbuf, 0x50+$src$$reg );
3039 // fild 64-bits at [SP]
3040 emit_opcode(cbuf,0xdf);
3041 emit_d8(cbuf, 0x6C);
3042 emit_d8(cbuf, 0x24);
3043 emit_d8(cbuf, 0x00);
3044 %}
3046 enc_class long_int_multiply( eADXRegL dst, nadxRegI src) %{
3047 // Basic idea: long = (long)int * (long)int
3048 // IMUL EDX:EAX, src
3049 emit_opcode( cbuf, 0xF7 );
3050 emit_rm( cbuf, 0x3, 0x5, $src$$reg);
3051 %}
3053 enc_class long_uint_multiply( eADXRegL dst, nadxRegI src) %{
3054 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
3055 // MUL EDX:EAX, src
3056 emit_opcode( cbuf, 0xF7 );
3057 emit_rm( cbuf, 0x3, 0x4, $src$$reg);
3058 %}
3060 enc_class long_multiply( eADXRegL dst, eRegL src, eRegI tmp ) %{
3061 // Basic idea: lo(result) = lo(x_lo * y_lo)
3062 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
3063 // MOV $tmp,$src.lo
3064 encode_Copy( cbuf, $tmp$$reg, $src$$reg );
3065 // IMUL $tmp,EDX
3066 emit_opcode( cbuf, 0x0F );
3067 emit_opcode( cbuf, 0xAF );
3068 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3069 // MOV EDX,$src.hi
3070 encode_Copy( cbuf, HIGH_FROM_LOW($dst$$reg), HIGH_FROM_LOW($src$$reg) );
3071 // IMUL EDX,EAX
3072 emit_opcode( cbuf, 0x0F );
3073 emit_opcode( cbuf, 0xAF );
3074 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $dst$$reg );
3075 // ADD $tmp,EDX
3076 emit_opcode( cbuf, 0x03 );
3077 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3078 // MUL EDX:EAX,$src.lo
3079 emit_opcode( cbuf, 0xF7 );
3080 emit_rm( cbuf, 0x3, 0x4, $src$$reg );
3081 // ADD EDX,ESI
3082 emit_opcode( cbuf, 0x03 );
3083 emit_rm( cbuf, 0x3, HIGH_FROM_LOW($dst$$reg), $tmp$$reg );
3084 %}
3086 enc_class long_multiply_con( eADXRegL dst, immL_127 src, eRegI tmp ) %{
3087 // Basic idea: lo(result) = lo(src * y_lo)
3088 // hi(result) = hi(src * y_lo) + lo(src * y_hi)
3089 // IMUL $tmp,EDX,$src
3090 emit_opcode( cbuf, 0x6B );
3091 emit_rm( cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg) );
3092 emit_d8( cbuf, (int)$src$$constant );
3093 // MOV EDX,$src
3094 emit_opcode(cbuf, 0xB8 + EDX_enc);
3095 emit_d32( cbuf, (int)$src$$constant );
3096 // MUL EDX:EAX,EDX
3097 emit_opcode( cbuf, 0xF7 );
3098 emit_rm( cbuf, 0x3, 0x4, EDX_enc );
3099 // ADD EDX,ESI
3100 emit_opcode( cbuf, 0x03 );
3101 emit_rm( cbuf, 0x3, EDX_enc, $tmp$$reg );
3102 %}
3104 enc_class long_div( eRegL src1, eRegL src2 ) %{
3105 // PUSH src1.hi
3106 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3107 // PUSH src1.lo
3108 emit_opcode(cbuf, 0x50+$src1$$reg );
3109 // PUSH src2.hi
3110 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3111 // PUSH src2.lo
3112 emit_opcode(cbuf, 0x50+$src2$$reg );
3113 // CALL directly to the runtime
3114 cbuf.set_inst_mark();
3115 emit_opcode(cbuf,0xE8); // Call into runtime
3116 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::ldiv) - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3117 // Restore stack
3118 emit_opcode(cbuf, 0x83); // add SP, #framesize
3119 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3120 emit_d8(cbuf, 4*4);
3121 %}
3123 enc_class long_mod( eRegL src1, eRegL src2 ) %{
3124 // PUSH src1.hi
3125 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src1$$reg) );
3126 // PUSH src1.lo
3127 emit_opcode(cbuf, 0x50+$src1$$reg );
3128 // PUSH src2.hi
3129 emit_opcode(cbuf, HIGH_FROM_LOW(0x50+$src2$$reg) );
3130 // PUSH src2.lo
3131 emit_opcode(cbuf, 0x50+$src2$$reg );
3132 // CALL directly to the runtime
3133 cbuf.set_inst_mark();
3134 emit_opcode(cbuf,0xE8); // Call into runtime
3135 emit_d32_reloc(cbuf, (CAST_FROM_FN_PTR(address, SharedRuntime::lrem ) - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3136 // Restore stack
3137 emit_opcode(cbuf, 0x83); // add SP, #framesize
3138 emit_rm(cbuf, 0x3, 0x00, ESP_enc);
3139 emit_d8(cbuf, 4*4);
3140 %}
3142 enc_class long_cmp_flags0( eRegL src, eRegI tmp ) %{
3143 // MOV $tmp,$src.lo
3144 emit_opcode(cbuf, 0x8B);
3145 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
3146 // OR $tmp,$src.hi
3147 emit_opcode(cbuf, 0x0B);
3148 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg));
3149 %}
3151 enc_class long_cmp_flags1( eRegL src1, eRegL src2 ) %{
3152 // CMP $src1.lo,$src2.lo
3153 emit_opcode( cbuf, 0x3B );
3154 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3155 // JNE,s skip
3156 emit_cc(cbuf, 0x70, 0x5);
3157 emit_d8(cbuf,2);
3158 // CMP $src1.hi,$src2.hi
3159 emit_opcode( cbuf, 0x3B );
3160 emit_rm(cbuf, 0x3, HIGH_FROM_LOW($src1$$reg), HIGH_FROM_LOW($src2$$reg) );
3161 %}
3163 enc_class long_cmp_flags2( eRegL src1, eRegL src2, eRegI tmp ) %{
3164 // CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits
3165 emit_opcode( cbuf, 0x3B );
3166 emit_rm(cbuf, 0x3, $src1$$reg, $src2$$reg );
3167 // MOV $tmp,$src1.hi
3168 emit_opcode( cbuf, 0x8B );
3169 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src1$$reg) );
3170 // SBB $tmp,$src2.hi\t! Compute flags for long compare
3171 emit_opcode( cbuf, 0x1B );
3172 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src2$$reg) );
3173 %}
3175 enc_class long_cmp_flags3( eRegL src, eRegI tmp ) %{
3176 // XOR $tmp,$tmp
3177 emit_opcode(cbuf,0x33); // XOR
3178 emit_rm(cbuf,0x3, $tmp$$reg, $tmp$$reg);
3179 // CMP $tmp,$src.lo
3180 emit_opcode( cbuf, 0x3B );
3181 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg );
3182 // SBB $tmp,$src.hi
3183 emit_opcode( cbuf, 0x1B );
3184 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($src$$reg) );
3185 %}
3187 // Sniff, sniff... smells like Gnu Superoptimizer
3188 enc_class neg_long( eRegL dst ) %{
3189 emit_opcode(cbuf,0xF7); // NEG hi
3190 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3191 emit_opcode(cbuf,0xF7); // NEG lo
3192 emit_rm (cbuf,0x3, 0x3, $dst$$reg );
3193 emit_opcode(cbuf,0x83); // SBB hi,0
3194 emit_rm (cbuf,0x3, 0x3, HIGH_FROM_LOW($dst$$reg));
3195 emit_d8 (cbuf,0 );
3196 %}
3198 enc_class movq_ld(regXD dst, memory mem) %{
3199 MacroAssembler _masm(&cbuf);
3200 __ movq($dst$$XMMRegister, $mem$$Address);
3201 %}
3203 enc_class movq_st(memory mem, regXD src) %{
3204 MacroAssembler _masm(&cbuf);
3205 __ movq($mem$$Address, $src$$XMMRegister);
3206 %}
3208 enc_class pshufd_8x8(regX dst, regX src) %{
3209 MacroAssembler _masm(&cbuf);
3211 encode_CopyXD(cbuf, $dst$$reg, $src$$reg);
3212 __ punpcklbw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg));
3213 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($dst$$reg), 0x00);
3214 %}
3216 enc_class pshufd_4x16(regX dst, regX src) %{
3217 MacroAssembler _masm(&cbuf);
3219 __ pshuflw(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), 0x00);
3220 %}
3222 enc_class pshufd(regXD dst, regXD src, int mode) %{
3223 MacroAssembler _masm(&cbuf);
3225 __ pshufd(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg), $mode);
3226 %}
3228 enc_class pxor(regXD dst, regXD src) %{
3229 MacroAssembler _masm(&cbuf);
3231 __ pxor(as_XMMRegister($dst$$reg), as_XMMRegister($src$$reg));
3232 %}
3234 enc_class mov_i2x(regXD dst, eRegI src) %{
3235 MacroAssembler _masm(&cbuf);
3237 __ movdl(as_XMMRegister($dst$$reg), as_Register($src$$reg));
3238 %}
3241 // Because the transitions from emitted code to the runtime
3242 // monitorenter/exit helper stubs are so slow it's critical that
3243 // we inline both the stack-locking fast-path and the inflated fast path.
3244 //
3245 // See also: cmpFastLock and cmpFastUnlock.
3246 //
3247 // What follows is a specialized inline transliteration of the code
3248 // in slow_enter() and slow_exit(). If we're concerned about I$ bloat
3249 // another option would be to emit TrySlowEnter and TrySlowExit methods
3250 // at startup-time. These methods would accept arguments as
3251 // (rax,=Obj, rbx=Self, rcx=box, rdx=Scratch) and return success-failure
3252 // indications in the icc.ZFlag. Fast_Lock and Fast_Unlock would simply
3253 // marshal the arguments and emit calls to TrySlowEnter and TrySlowExit.
3254 // In practice, however, the # of lock sites is bounded and is usually small.
3255 // Besides the call overhead, TrySlowEnter and TrySlowExit might suffer
3256 // if the processor uses simple bimodal branch predictors keyed by EIP
3257 // Since the helper routines would be called from multiple synchronization
3258 // sites.
3259 //
3260 // An even better approach would be write "MonitorEnter()" and "MonitorExit()"
3261 // in java - using j.u.c and unsafe - and just bind the lock and unlock sites
3262 // to those specialized methods. That'd give us a mostly platform-independent
3263 // implementation that the JITs could optimize and inline at their pleasure.
3264 // Done correctly, the only time we'd need to cross to native could would be
3265 // to park() or unpark() threads. We'd also need a few more unsafe operators
3266 // to (a) prevent compiler-JIT reordering of non-volatile accesses, and
3267 // (b) explicit barriers or fence operations.
3268 //
3269 // TODO:
3270 //
3271 // * Arrange for C2 to pass "Self" into Fast_Lock and Fast_Unlock in one of the registers (scr).
3272 // This avoids manifesting the Self pointer in the Fast_Lock and Fast_Unlock terminals.
3273 // Given TLAB allocation, Self is usually manifested in a register, so passing it into
3274 // the lock operators would typically be faster than reifying Self.
3275 //
3276 // * Ideally I'd define the primitives as:
3277 // fast_lock (nax Obj, nax box, EAX tmp, nax scr) where box, tmp and scr are KILLED.
3278 // fast_unlock (nax Obj, EAX box, nax tmp) where box and tmp are KILLED
3279 // Unfortunately ADLC bugs prevent us from expressing the ideal form.
3280 // Instead, we're stuck with a rather awkward and brittle register assignments below.
3281 // Furthermore the register assignments are overconstrained, possibly resulting in
3282 // sub-optimal code near the synchronization site.
3283 //
3284 // * Eliminate the sp-proximity tests and just use "== Self" tests instead.
3285 // Alternately, use a better sp-proximity test.
3286 //
3287 // * Currently ObjectMonitor._Owner can hold either an sp value or a (THREAD *) value.
3288 // Either one is sufficient to uniquely identify a thread.
3289 // TODO: eliminate use of sp in _owner and use get_thread(tr) instead.
3290 //
3291 // * Intrinsify notify() and notifyAll() for the common cases where the
3292 // object is locked by the calling thread but the waitlist is empty.
3293 // avoid the expensive JNI call to JVM_Notify() and JVM_NotifyAll().
3294 //
3295 // * use jccb and jmpb instead of jcc and jmp to improve code density.
3296 // But beware of excessive branch density on AMD Opterons.
3297 //
3298 // * Both Fast_Lock and Fast_Unlock set the ICC.ZF to indicate success
3299 // or failure of the fast-path. If the fast-path fails then we pass
3300 // control to the slow-path, typically in C. In Fast_Lock and
3301 // Fast_Unlock we often branch to DONE_LABEL, just to find that C2
3302 // will emit a conditional branch immediately after the node.
3303 // So we have branches to branches and lots of ICC.ZF games.
3304 // Instead, it might be better to have C2 pass a "FailureLabel"
3305 // into Fast_Lock and Fast_Unlock. In the case of success, control
3306 // will drop through the node. ICC.ZF is undefined at exit.
3307 // In the case of failure, the node will branch directly to the
3308 // FailureLabel
3311 // obj: object to lock
3312 // box: on-stack box address (displaced header location) - KILLED
3313 // rax,: tmp -- KILLED
3314 // scr: tmp -- KILLED
3315 enc_class Fast_Lock( eRegP obj, eRegP box, eAXRegI tmp, eRegP scr ) %{
3317 Register objReg = as_Register($obj$$reg);
3318 Register boxReg = as_Register($box$$reg);
3319 Register tmpReg = as_Register($tmp$$reg);
3320 Register scrReg = as_Register($scr$$reg);
3322 // Ensure the register assignents are disjoint
3323 guarantee (objReg != boxReg, "") ;
3324 guarantee (objReg != tmpReg, "") ;
3325 guarantee (objReg != scrReg, "") ;
3326 guarantee (boxReg != tmpReg, "") ;
3327 guarantee (boxReg != scrReg, "") ;
3328 guarantee (tmpReg == as_Register(EAX_enc), "") ;
3330 MacroAssembler masm(&cbuf);
3332 if (_counters != NULL) {
3333 masm.atomic_incl(ExternalAddress((address) _counters->total_entry_count_addr()));
3334 }
3335 if (EmitSync & 1) {
3336 // set box->dhw = unused_mark (3)
3337 // Force all sync thru slow-path: slow_enter() and slow_exit()
3338 masm.movptr (Address(boxReg, 0), int32_t(markOopDesc::unused_mark())) ;
3339 masm.cmpptr (rsp, (int32_t)0) ;
3340 } else
3341 if (EmitSync & 2) {
3342 Label DONE_LABEL ;
3343 if (UseBiasedLocking) {
3344 // Note: tmpReg maps to the swap_reg argument and scrReg to the tmp_reg argument.
3345 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3346 }
3348 masm.movptr(tmpReg, Address(objReg, 0)) ; // fetch markword
3349 masm.orptr (tmpReg, 0x1);
3350 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3351 if (os::is_MP()) { masm.lock(); }
3352 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3353 masm.jcc(Assembler::equal, DONE_LABEL);
3354 // Recursive locking
3355 masm.subptr(tmpReg, rsp);
3356 masm.andptr(tmpReg, (int32_t) 0xFFFFF003 );
3357 masm.movptr(Address(boxReg, 0), tmpReg);
3358 masm.bind(DONE_LABEL) ;
3359 } else {
3360 // Possible cases that we'll encounter in fast_lock
3361 // ------------------------------------------------
3362 // * Inflated
3363 // -- unlocked
3364 // -- Locked
3365 // = by self
3366 // = by other
3367 // * biased
3368 // -- by Self
3369 // -- by other
3370 // * neutral
3371 // * stack-locked
3372 // -- by self
3373 // = sp-proximity test hits
3374 // = sp-proximity test generates false-negative
3375 // -- by other
3376 //
3378 Label IsInflated, DONE_LABEL, PopDone ;
3380 // TODO: optimize away redundant LDs of obj->mark and improve the markword triage
3381 // order to reduce the number of conditional branches in the most common cases.
3382 // Beware -- there's a subtle invariant that fetch of the markword
3383 // at [FETCH], below, will never observe a biased encoding (*101b).
3384 // If this invariant is not held we risk exclusion (safety) failure.
3385 if (UseBiasedLocking && !UseOptoBiasInlining) {
3386 masm.biased_locking_enter(boxReg, objReg, tmpReg, scrReg, false, DONE_LABEL, NULL, _counters);
3387 }
3389 masm.movptr(tmpReg, Address(objReg, 0)) ; // [FETCH]
3390 masm.testptr(tmpReg, 0x02) ; // Inflated v (Stack-locked or neutral)
3391 masm.jccb (Assembler::notZero, IsInflated) ;
3393 // Attempt stack-locking ...
3394 masm.orptr (tmpReg, 0x1);
3395 masm.movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS
3396 if (os::is_MP()) { masm.lock(); }
3397 masm.cmpxchgptr(boxReg, Address(objReg, 0)); // Updates tmpReg
3398 if (_counters != NULL) {
3399 masm.cond_inc32(Assembler::equal,
3400 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3401 }
3402 masm.jccb (Assembler::equal, DONE_LABEL);
3404 // Recursive locking
3405 masm.subptr(tmpReg, rsp);
3406 masm.andptr(tmpReg, 0xFFFFF003 );
3407 masm.movptr(Address(boxReg, 0), tmpReg);
3408 if (_counters != NULL) {
3409 masm.cond_inc32(Assembler::equal,
3410 ExternalAddress((address)_counters->fast_path_entry_count_addr()));
3411 }
3412 masm.jmp (DONE_LABEL) ;
3414 masm.bind (IsInflated) ;
3416 // The object is inflated.
3417 //
3418 // TODO-FIXME: eliminate the ugly use of manifest constants:
3419 // Use markOopDesc::monitor_value instead of "2".
3420 // use markOop::unused_mark() instead of "3".
3421 // The tmpReg value is an objectMonitor reference ORed with
3422 // markOopDesc::monitor_value (2). We can either convert tmpReg to an
3423 // objectmonitor pointer by masking off the "2" bit or we can just
3424 // use tmpReg as an objectmonitor pointer but bias the objectmonitor
3425 // field offsets with "-2" to compensate for and annul the low-order tag bit.
3426 //
3427 // I use the latter as it avoids AGI stalls.
3428 // As such, we write "mov r, [tmpReg+OFFSETOF(Owner)-2]"
3429 // instead of "mov r, [tmpReg+OFFSETOF(Owner)]".
3430 //
3431 #define OFFSET_SKEWED(f) ((ObjectMonitor::f ## _offset_in_bytes())-2)
3433 // boxReg refers to the on-stack BasicLock in the current frame.
3434 // We'd like to write:
3435 // set box->_displaced_header = markOop::unused_mark(). Any non-0 value suffices.
3436 // This is convenient but results a ST-before-CAS penalty. The following CAS suffers
3437 // additional latency as we have another ST in the store buffer that must drain.
3439 if (EmitSync & 8192) {
3440 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3441 masm.get_thread (scrReg) ;
3442 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3443 masm.movptr(tmpReg, NULL_WORD); // consider: xor vs mov
3444 if (os::is_MP()) { masm.lock(); }
3445 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3446 } else
3447 if ((EmitSync & 128) == 0) { // avoid ST-before-CAS
3448 masm.movptr(scrReg, boxReg) ;
3449 masm.movptr(boxReg, tmpReg); // consider: LEA box, [tmp-2]
3451 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3452 if ((EmitSync & 2048) && VM_Version::supports_3dnow() && os::is_MP()) {
3453 // prefetchw [eax + Offset(_owner)-2]
3454 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3455 }
3457 if ((EmitSync & 64) == 0) {
3458 // Optimistic form: consider XORL tmpReg,tmpReg
3459 masm.movptr(tmpReg, NULL_WORD) ;
3460 } else {
3461 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3462 // Test-And-CAS instead of CAS
3463 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3464 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3465 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3466 }
3468 // Appears unlocked - try to swing _owner from null to non-null.
3469 // Ideally, I'd manifest "Self" with get_thread and then attempt
3470 // to CAS the register containing Self into m->Owner.
3471 // But we don't have enough registers, so instead we can either try to CAS
3472 // rsp or the address of the box (in scr) into &m->owner. If the CAS succeeds
3473 // we later store "Self" into m->Owner. Transiently storing a stack address
3474 // (rsp or the address of the box) into m->owner is harmless.
3475 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3476 if (os::is_MP()) { masm.lock(); }
3477 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3478 masm.movptr(Address(scrReg, 0), 3) ; // box->_displaced_header = 3
3479 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3480 masm.get_thread (scrReg) ; // beware: clobbers ICCs
3481 masm.movptr(Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2), scrReg) ;
3482 masm.xorptr(boxReg, boxReg) ; // set icc.ZFlag = 1 to indicate success
3484 // If the CAS fails we can either retry or pass control to the slow-path.
3485 // We use the latter tactic.
3486 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3487 // If the CAS was successful ...
3488 // Self has acquired the lock
3489 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3490 // Intentional fall-through into DONE_LABEL ...
3491 } else {
3492 masm.movptr(Address(boxReg, 0), 3) ; // results in ST-before-CAS penalty
3493 masm.movptr(boxReg, tmpReg) ;
3495 // Using a prefetchw helps avoid later RTS->RTO upgrades and cache probes
3496 if ((EmitSync & 2048) && VM_Version::supports_3dnow() && os::is_MP()) {
3497 // prefetchw [eax + Offset(_owner)-2]
3498 masm.prefetchw(Address(rax, ObjectMonitor::owner_offset_in_bytes()-2));
3499 }
3501 if ((EmitSync & 64) == 0) {
3502 // Optimistic form
3503 masm.xorptr (tmpReg, tmpReg) ;
3504 } else {
3505 // Can suffer RTS->RTO upgrades on shared or cold $ lines
3506 masm.movptr(tmpReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ; // rax, = m->_owner
3507 masm.testptr(tmpReg, tmpReg) ; // Locked ?
3508 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3509 }
3511 // Appears unlocked - try to swing _owner from null to non-null.
3512 // Use either "Self" (in scr) or rsp as thread identity in _owner.
3513 // Invariant: tmpReg == 0. tmpReg is EAX which is the implicit cmpxchg comparand.
3514 masm.get_thread (scrReg) ;
3515 if (os::is_MP()) { masm.lock(); }
3516 masm.cmpxchgptr(scrReg, Address(boxReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3518 // If the CAS fails we can either retry or pass control to the slow-path.
3519 // We use the latter tactic.
3520 // Pass the CAS result in the icc.ZFlag into DONE_LABEL
3521 // If the CAS was successful ...
3522 // Self has acquired the lock
3523 // Invariant: m->_recursions should already be 0, so we don't need to explicitly set it.
3524 // Intentional fall-through into DONE_LABEL ...
3525 }
3527 // DONE_LABEL is a hot target - we'd really like to place it at the
3528 // start of cache line by padding with NOPs.
3529 // See the AMD and Intel software optimization manuals for the
3530 // most efficient "long" NOP encodings.
3531 // Unfortunately none of our alignment mechanisms suffice.
3532 masm.bind(DONE_LABEL);
3534 // Avoid branch-to-branch on AMD processors
3535 // This appears to be superstition.
3536 if (EmitSync & 32) masm.nop() ;
3539 // At DONE_LABEL the icc ZFlag is set as follows ...
3540 // Fast_Unlock uses the same protocol.
3541 // ZFlag == 1 -> Success
3542 // ZFlag == 0 -> Failure - force control through the slow-path
3543 }
3544 %}
3546 // obj: object to unlock
3547 // box: box address (displaced header location), killed. Must be EAX.
3548 // rbx,: killed tmp; cannot be obj nor box.
3549 //
3550 // Some commentary on balanced locking:
3551 //
3552 // Fast_Lock and Fast_Unlock are emitted only for provably balanced lock sites.
3553 // Methods that don't have provably balanced locking are forced to run in the
3554 // interpreter - such methods won't be compiled to use fast_lock and fast_unlock.
3555 // The interpreter provides two properties:
3556 // I1: At return-time the interpreter automatically and quietly unlocks any
3557 // objects acquired the current activation (frame). Recall that the
3558 // interpreter maintains an on-stack list of locks currently held by
3559 // a frame.
3560 // I2: If a method attempts to unlock an object that is not held by the
3561 // the frame the interpreter throws IMSX.
3562 //
3563 // Lets say A(), which has provably balanced locking, acquires O and then calls B().
3564 // B() doesn't have provably balanced locking so it runs in the interpreter.
3565 // Control returns to A() and A() unlocks O. By I1 and I2, above, we know that O
3566 // is still locked by A().
3567 //
3568 // The only other source of unbalanced locking would be JNI. The "Java Native Interface:
3569 // Programmer's Guide and Specification" claims that an object locked by jni_monitorenter
3570 // should not be unlocked by "normal" java-level locking and vice-versa. The specification
3571 // doesn't specify what will occur if a program engages in such mixed-mode locking, however.
3573 enc_class Fast_Unlock( nabxRegP obj, eAXRegP box, eRegP tmp) %{
3575 Register objReg = as_Register($obj$$reg);
3576 Register boxReg = as_Register($box$$reg);
3577 Register tmpReg = as_Register($tmp$$reg);
3579 guarantee (objReg != boxReg, "") ;
3580 guarantee (objReg != tmpReg, "") ;
3581 guarantee (boxReg != tmpReg, "") ;
3582 guarantee (boxReg == as_Register(EAX_enc), "") ;
3583 MacroAssembler masm(&cbuf);
3585 if (EmitSync & 4) {
3586 // Disable - inhibit all inlining. Force control through the slow-path
3587 masm.cmpptr (rsp, 0) ;
3588 } else
3589 if (EmitSync & 8) {
3590 Label DONE_LABEL ;
3591 if (UseBiasedLocking) {
3592 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3593 }
3594 // classic stack-locking code ...
3595 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3596 masm.testptr(tmpReg, tmpReg) ;
3597 masm.jcc (Assembler::zero, DONE_LABEL) ;
3598 if (os::is_MP()) { masm.lock(); }
3599 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3600 masm.bind(DONE_LABEL);
3601 } else {
3602 Label DONE_LABEL, Stacked, CheckSucc, Inflated ;
3604 // Critically, the biased locking test must have precedence over
3605 // and appear before the (box->dhw == 0) recursive stack-lock test.
3606 if (UseBiasedLocking && !UseOptoBiasInlining) {
3607 masm.biased_locking_exit(objReg, tmpReg, DONE_LABEL);
3608 }
3610 masm.cmpptr(Address(boxReg, 0), 0) ; // Examine the displaced header
3611 masm.movptr(tmpReg, Address(objReg, 0)) ; // Examine the object's markword
3612 masm.jccb (Assembler::zero, DONE_LABEL) ; // 0 indicates recursive stack-lock
3614 masm.testptr(tmpReg, 0x02) ; // Inflated?
3615 masm.jccb (Assembler::zero, Stacked) ;
3617 masm.bind (Inflated) ;
3618 // It's inflated.
3619 // Despite our balanced locking property we still check that m->_owner == Self
3620 // as java routines or native JNI code called by this thread might
3621 // have released the lock.
3622 // Refer to the comments in synchronizer.cpp for how we might encode extra
3623 // state in _succ so we can avoid fetching EntryList|cxq.
3624 //
3625 // I'd like to add more cases in fast_lock() and fast_unlock() --
3626 // such as recursive enter and exit -- but we have to be wary of
3627 // I$ bloat, T$ effects and BP$ effects.
3628 //
3629 // If there's no contention try a 1-0 exit. That is, exit without
3630 // a costly MEMBAR or CAS. See synchronizer.cpp for details on how
3631 // we detect and recover from the race that the 1-0 exit admits.
3632 //
3633 // Conceptually Fast_Unlock() must execute a STST|LDST "release" barrier
3634 // before it STs null into _owner, releasing the lock. Updates
3635 // to data protected by the critical section must be visible before
3636 // we drop the lock (and thus before any other thread could acquire
3637 // the lock and observe the fields protected by the lock).
3638 // IA32's memory-model is SPO, so STs are ordered with respect to
3639 // each other and there's no need for an explicit barrier (fence).
3640 // See also http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
3642 masm.get_thread (boxReg) ;
3643 if ((EmitSync & 4096) && VM_Version::supports_3dnow() && os::is_MP()) {
3644 // prefetchw [ebx + Offset(_owner)-2]
3645 masm.prefetchw(Address(rbx, ObjectMonitor::owner_offset_in_bytes()-2));
3646 }
3648 // Note that we could employ various encoding schemes to reduce
3649 // the number of loads below (currently 4) to just 2 or 3.
3650 // Refer to the comments in synchronizer.cpp.
3651 // In practice the chain of fetches doesn't seem to impact performance, however.
3652 if ((EmitSync & 65536) == 0 && (EmitSync & 256)) {
3653 // Attempt to reduce branch density - AMD's branch predictor.
3654 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3655 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3656 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3657 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3658 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3659 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3660 masm.jmpb (DONE_LABEL) ;
3661 } else {
3662 masm.xorptr(boxReg, Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2)) ;
3663 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::recursions_offset_in_bytes()-2)) ;
3664 masm.jccb (Assembler::notZero, DONE_LABEL) ;
3665 masm.movptr(boxReg, Address (tmpReg, ObjectMonitor::EntryList_offset_in_bytes()-2)) ;
3666 masm.orptr(boxReg, Address (tmpReg, ObjectMonitor::cxq_offset_in_bytes()-2)) ;
3667 masm.jccb (Assembler::notZero, CheckSucc) ;
3668 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3669 masm.jmpb (DONE_LABEL) ;
3670 }
3672 // The Following code fragment (EmitSync & 65536) improves the performance of
3673 // contended applications and contended synchronization microbenchmarks.
3674 // Unfortunately the emission of the code - even though not executed - causes regressions
3675 // in scimark and jetstream, evidently because of $ effects. Replacing the code
3676 // with an equal number of never-executed NOPs results in the same regression.
3677 // We leave it off by default.
3679 if ((EmitSync & 65536) != 0) {
3680 Label LSuccess, LGoSlowPath ;
3682 masm.bind (CheckSucc) ;
3684 // Optional pre-test ... it's safe to elide this
3685 if ((EmitSync & 16) == 0) {
3686 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3687 masm.jccb (Assembler::zero, LGoSlowPath) ;
3688 }
3690 // We have a classic Dekker-style idiom:
3691 // ST m->_owner = 0 ; MEMBAR; LD m->_succ
3692 // There are a number of ways to implement the barrier:
3693 // (1) lock:andl &m->_owner, 0
3694 // is fast, but mask doesn't currently support the "ANDL M,IMM32" form.
3695 // LOCK: ANDL [ebx+Offset(_Owner)-2], 0
3696 // Encodes as 81 31 OFF32 IMM32 or 83 63 OFF8 IMM8
3697 // (2) If supported, an explicit MFENCE is appealing.
3698 // In older IA32 processors MFENCE is slower than lock:add or xchg
3699 // particularly if the write-buffer is full as might be the case if
3700 // if stores closely precede the fence or fence-equivalent instruction.
3701 // In more modern implementations MFENCE appears faster, however.
3702 // (3) In lieu of an explicit fence, use lock:addl to the top-of-stack
3703 // The $lines underlying the top-of-stack should be in M-state.
3704 // The locked add instruction is serializing, of course.
3705 // (4) Use xchg, which is serializing
3706 // mov boxReg, 0; xchgl boxReg, [tmpReg + Offset(_owner)-2] also works
3707 // (5) ST m->_owner = 0 and then execute lock:orl &m->_succ, 0.
3708 // The integer condition codes will tell us if succ was 0.
3709 // Since _succ and _owner should reside in the same $line and
3710 // we just stored into _owner, it's likely that the $line
3711 // remains in M-state for the lock:orl.
3712 //
3713 // We currently use (3), although it's likely that switching to (2)
3714 // is correct for the future.
3716 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), NULL_WORD) ;
3717 if (os::is_MP()) {
3718 if (VM_Version::supports_sse2() && 1 == FenceInstruction) {
3719 masm.mfence();
3720 } else {
3721 masm.lock () ; masm.addptr(Address(rsp, 0), 0) ;
3722 }
3723 }
3724 // Ratify _succ remains non-null
3725 masm.cmpptr(Address (tmpReg, ObjectMonitor::succ_offset_in_bytes()-2), 0) ;
3726 masm.jccb (Assembler::notZero, LSuccess) ;
3728 masm.xorptr(boxReg, boxReg) ; // box is really EAX
3729 if (os::is_MP()) { masm.lock(); }
3730 masm.cmpxchgptr(rsp, Address(tmpReg, ObjectMonitor::owner_offset_in_bytes()-2));
3731 masm.jccb (Assembler::notEqual, LSuccess) ;
3732 // Since we're low on registers we installed rsp as a placeholding in _owner.
3733 // Now install Self over rsp. This is safe as we're transitioning from
3734 // non-null to non=null
3735 masm.get_thread (boxReg) ;
3736 masm.movptr(Address (tmpReg, ObjectMonitor::owner_offset_in_bytes()-2), boxReg) ;
3737 // Intentional fall-through into LGoSlowPath ...
3739 masm.bind (LGoSlowPath) ;
3740 masm.orptr(boxReg, 1) ; // set ICC.ZF=0 to indicate failure
3741 masm.jmpb (DONE_LABEL) ;
3743 masm.bind (LSuccess) ;
3744 masm.xorptr(boxReg, boxReg) ; // set ICC.ZF=1 to indicate success
3745 masm.jmpb (DONE_LABEL) ;
3746 }
3748 masm.bind (Stacked) ;
3749 // It's not inflated and it's not recursively stack-locked and it's not biased.
3750 // It must be stack-locked.
3751 // Try to reset the header to displaced header.
3752 // The "box" value on the stack is stable, so we can reload
3753 // and be assured we observe the same value as above.
3754 masm.movptr(tmpReg, Address(boxReg, 0)) ;
3755 if (os::is_MP()) { masm.lock(); }
3756 masm.cmpxchgptr(tmpReg, Address(objReg, 0)); // Uses EAX which is box
3757 // Intention fall-thru into DONE_LABEL
3760 // DONE_LABEL is a hot target - we'd really like to place it at the
3761 // start of cache line by padding with NOPs.
3762 // See the AMD and Intel software optimization manuals for the
3763 // most efficient "long" NOP encodings.
3764 // Unfortunately none of our alignment mechanisms suffice.
3765 if ((EmitSync & 65536) == 0) {
3766 masm.bind (CheckSucc) ;
3767 }
3768 masm.bind(DONE_LABEL);
3770 // Avoid branch to branch on AMD processors
3771 if (EmitSync & 32768) { masm.nop() ; }
3772 }
3773 %}
3776 enc_class enc_pop_rdx() %{
3777 emit_opcode(cbuf,0x5A);
3778 %}
3780 enc_class enc_rethrow() %{
3781 cbuf.set_inst_mark();
3782 emit_opcode(cbuf, 0xE9); // jmp entry
3783 emit_d32_reloc(cbuf, (int)OptoRuntime::rethrow_stub() - ((int)cbuf.code_end())-4,
3784 runtime_call_Relocation::spec(), RELOC_IMM32 );
3785 %}
3788 // Convert a double to an int. Java semantics require we do complex
3789 // manglelations in the corner cases. So we set the rounding mode to
3790 // 'zero', store the darned double down as an int, and reset the
3791 // rounding mode to 'nearest'. The hardware throws an exception which
3792 // patches up the correct value directly to the stack.
3793 enc_class D2I_encoding( regD src ) %{
3794 // Flip to round-to-zero mode. We attempted to allow invalid-op
3795 // exceptions here, so that a NAN or other corner-case value will
3796 // thrown an exception (but normal values get converted at full speed).
3797 // However, I2C adapters and other float-stack manglers leave pending
3798 // invalid-op exceptions hanging. We would have to clear them before
3799 // enabling them and that is more expensive than just testing for the
3800 // invalid value Intel stores down in the corner cases.
3801 emit_opcode(cbuf,0xD9); // FLDCW trunc
3802 emit_opcode(cbuf,0x2D);
3803 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3804 // Allocate a word
3805 emit_opcode(cbuf,0x83); // SUB ESP,4
3806 emit_opcode(cbuf,0xEC);
3807 emit_d8(cbuf,0x04);
3808 // Encoding assumes a double has been pushed into FPR0.
3809 // Store down the double as an int, popping the FPU stack
3810 emit_opcode(cbuf,0xDB); // FISTP [ESP]
3811 emit_opcode(cbuf,0x1C);
3812 emit_d8(cbuf,0x24);
3813 // Restore the rounding mode; mask the exception
3814 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3815 emit_opcode(cbuf,0x2D);
3816 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3817 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3818 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3820 // Load the converted int; adjust CPU stack
3821 emit_opcode(cbuf,0x58); // POP EAX
3822 emit_opcode(cbuf,0x3D); // CMP EAX,imm
3823 emit_d32 (cbuf,0x80000000); // 0x80000000
3824 emit_opcode(cbuf,0x75); // JNE around_slow_call
3825 emit_d8 (cbuf,0x07); // Size of slow_call
3826 // Push src onto stack slow-path
3827 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3828 emit_d8 (cbuf,0xC0-1+$src$$reg );
3829 // CALL directly to the runtime
3830 cbuf.set_inst_mark();
3831 emit_opcode(cbuf,0xE8); // Call into runtime
3832 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3833 // Carry on here...
3834 %}
3836 enc_class D2L_encoding( regD src ) %{
3837 emit_opcode(cbuf,0xD9); // FLDCW trunc
3838 emit_opcode(cbuf,0x2D);
3839 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3840 // Allocate a word
3841 emit_opcode(cbuf,0x83); // SUB ESP,8
3842 emit_opcode(cbuf,0xEC);
3843 emit_d8(cbuf,0x08);
3844 // Encoding assumes a double has been pushed into FPR0.
3845 // Store down the double as a long, popping the FPU stack
3846 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3847 emit_opcode(cbuf,0x3C);
3848 emit_d8(cbuf,0x24);
3849 // Restore the rounding mode; mask the exception
3850 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3851 emit_opcode(cbuf,0x2D);
3852 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3853 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3854 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3856 // Load the converted int; adjust CPU stack
3857 emit_opcode(cbuf,0x58); // POP EAX
3858 emit_opcode(cbuf,0x5A); // POP EDX
3859 emit_opcode(cbuf,0x81); // CMP EDX,imm
3860 emit_d8 (cbuf,0xFA); // rdx
3861 emit_d32 (cbuf,0x80000000); // 0x80000000
3862 emit_opcode(cbuf,0x75); // JNE around_slow_call
3863 emit_d8 (cbuf,0x07+4); // Size of slow_call
3864 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3865 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3866 emit_opcode(cbuf,0x75); // JNE around_slow_call
3867 emit_d8 (cbuf,0x07); // Size of slow_call
3868 // Push src onto stack slow-path
3869 emit_opcode(cbuf,0xD9 ); // FLD ST(i)
3870 emit_d8 (cbuf,0xC0-1+$src$$reg );
3871 // CALL directly to the runtime
3872 cbuf.set_inst_mark();
3873 emit_opcode(cbuf,0xE8); // Call into runtime
3874 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3875 // Carry on here...
3876 %}
3878 enc_class X2L_encoding( regX src ) %{
3879 // Allocate a word
3880 emit_opcode(cbuf,0x83); // SUB ESP,8
3881 emit_opcode(cbuf,0xEC);
3882 emit_d8(cbuf,0x08);
3884 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3885 emit_opcode (cbuf, 0x0F );
3886 emit_opcode (cbuf, 0x11 );
3887 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3889 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3890 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3892 emit_opcode(cbuf,0xD9); // FLDCW trunc
3893 emit_opcode(cbuf,0x2D);
3894 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3896 // Encoding assumes a double has been pushed into FPR0.
3897 // Store down the double as a long, popping the FPU stack
3898 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3899 emit_opcode(cbuf,0x3C);
3900 emit_d8(cbuf,0x24);
3902 // Restore the rounding mode; mask the exception
3903 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3904 emit_opcode(cbuf,0x2D);
3905 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3906 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3907 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3909 // Load the converted int; adjust CPU stack
3910 emit_opcode(cbuf,0x58); // POP EAX
3912 emit_opcode(cbuf,0x5A); // POP EDX
3914 emit_opcode(cbuf,0x81); // CMP EDX,imm
3915 emit_d8 (cbuf,0xFA); // rdx
3916 emit_d32 (cbuf,0x80000000);// 0x80000000
3918 emit_opcode(cbuf,0x75); // JNE around_slow_call
3919 emit_d8 (cbuf,0x13+4); // Size of slow_call
3921 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3922 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3924 emit_opcode(cbuf,0x75); // JNE around_slow_call
3925 emit_d8 (cbuf,0x13); // Size of slow_call
3927 // Allocate a word
3928 emit_opcode(cbuf,0x83); // SUB ESP,4
3929 emit_opcode(cbuf,0xEC);
3930 emit_d8(cbuf,0x04);
3932 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], src
3933 emit_opcode (cbuf, 0x0F );
3934 emit_opcode (cbuf, 0x11 );
3935 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3937 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
3938 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3940 emit_opcode(cbuf,0x83); // ADD ESP,4
3941 emit_opcode(cbuf,0xC4);
3942 emit_d8(cbuf,0x04);
3944 // CALL directly to the runtime
3945 cbuf.set_inst_mark();
3946 emit_opcode(cbuf,0xE8); // Call into runtime
3947 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
3948 // Carry on here...
3949 %}
3951 enc_class XD2L_encoding( regXD src ) %{
3952 // Allocate a word
3953 emit_opcode(cbuf,0x83); // SUB ESP,8
3954 emit_opcode(cbuf,0xEC);
3955 emit_d8(cbuf,0x08);
3957 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
3958 emit_opcode (cbuf, 0x0F );
3959 emit_opcode (cbuf, 0x11 );
3960 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
3962 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
3963 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
3965 emit_opcode(cbuf,0xD9); // FLDCW trunc
3966 emit_opcode(cbuf,0x2D);
3967 emit_d32(cbuf,(int)StubRoutines::addr_fpu_cntrl_wrd_trunc());
3969 // Encoding assumes a double has been pushed into FPR0.
3970 // Store down the double as a long, popping the FPU stack
3971 emit_opcode(cbuf,0xDF); // FISTP [ESP]
3972 emit_opcode(cbuf,0x3C);
3973 emit_d8(cbuf,0x24);
3975 // Restore the rounding mode; mask the exception
3976 emit_opcode(cbuf,0xD9); // FLDCW std/24-bit mode
3977 emit_opcode(cbuf,0x2D);
3978 emit_d32( cbuf, Compile::current()->in_24_bit_fp_mode()
3979 ? (int)StubRoutines::addr_fpu_cntrl_wrd_24()
3980 : (int)StubRoutines::addr_fpu_cntrl_wrd_std());
3982 // Load the converted int; adjust CPU stack
3983 emit_opcode(cbuf,0x58); // POP EAX
3985 emit_opcode(cbuf,0x5A); // POP EDX
3987 emit_opcode(cbuf,0x81); // CMP EDX,imm
3988 emit_d8 (cbuf,0xFA); // rdx
3989 emit_d32 (cbuf,0x80000000); // 0x80000000
3991 emit_opcode(cbuf,0x75); // JNE around_slow_call
3992 emit_d8 (cbuf,0x13+4); // Size of slow_call
3994 emit_opcode(cbuf,0x85); // TEST EAX,EAX
3995 emit_opcode(cbuf,0xC0); // 2/rax,/rax,
3997 emit_opcode(cbuf,0x75); // JNE around_slow_call
3998 emit_d8 (cbuf,0x13); // Size of slow_call
4000 // Push src onto stack slow-path
4001 // Allocate a word
4002 emit_opcode(cbuf,0x83); // SUB ESP,8
4003 emit_opcode(cbuf,0xEC);
4004 emit_d8(cbuf,0x08);
4006 emit_opcode (cbuf, 0xF2 ); // MOVSD [ESP], src
4007 emit_opcode (cbuf, 0x0F );
4008 emit_opcode (cbuf, 0x11 );
4009 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4011 emit_opcode(cbuf,0xDD ); // FLD_D [ESP]
4012 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4014 emit_opcode(cbuf,0x83); // ADD ESP,8
4015 emit_opcode(cbuf,0xC4);
4016 emit_d8(cbuf,0x08);
4018 // CALL directly to the runtime
4019 cbuf.set_inst_mark();
4020 emit_opcode(cbuf,0xE8); // Call into runtime
4021 emit_d32_reloc(cbuf, (StubRoutines::d2l_wrapper() - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
4022 // Carry on here...
4023 %}
4025 enc_class D2X_encoding( regX dst, regD src ) %{
4026 // Allocate a word
4027 emit_opcode(cbuf,0x83); // SUB ESP,4
4028 emit_opcode(cbuf,0xEC);
4029 emit_d8(cbuf,0x04);
4030 int pop = 0x02;
4031 if ($src$$reg != FPR1L_enc) {
4032 emit_opcode( cbuf, 0xD9 ); // FLD ST(i-1)
4033 emit_d8( cbuf, 0xC0-1+$src$$reg );
4034 pop = 0x03;
4035 }
4036 store_to_stackslot( cbuf, 0xD9, pop, 0 ); // FST<P>_S [ESP]
4038 emit_opcode (cbuf, 0xF3 ); // MOVSS dst(xmm), [ESP]
4039 emit_opcode (cbuf, 0x0F );
4040 emit_opcode (cbuf, 0x10 );
4041 encode_RegMem(cbuf, $dst$$reg, ESP_enc, 0x4, 0, 0, false);
4043 emit_opcode(cbuf,0x83); // ADD ESP,4
4044 emit_opcode(cbuf,0xC4);
4045 emit_d8(cbuf,0x04);
4046 // Carry on here...
4047 %}
4049 enc_class FX2I_encoding( regX src, eRegI dst ) %{
4050 emit_rm(cbuf, 0x3, $dst$$reg, $src$$reg);
4052 // Compare the result to see if we need to go to the slow path
4053 emit_opcode(cbuf,0x81); // CMP dst,imm
4054 emit_rm (cbuf,0x3,0x7,$dst$$reg);
4055 emit_d32 (cbuf,0x80000000); // 0x80000000
4057 emit_opcode(cbuf,0x75); // JNE around_slow_call
4058 emit_d8 (cbuf,0x13); // Size of slow_call
4059 // Store xmm to a temp memory
4060 // location and push it onto stack.
4062 emit_opcode(cbuf,0x83); // SUB ESP,4
4063 emit_opcode(cbuf,0xEC);
4064 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4066 emit_opcode (cbuf, $primary ? 0xF2 : 0xF3 ); // MOVSS [ESP], xmm
4067 emit_opcode (cbuf, 0x0F );
4068 emit_opcode (cbuf, 0x11 );
4069 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4071 emit_opcode(cbuf, $primary ? 0xDD : 0xD9 ); // FLD [ESP]
4072 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4074 emit_opcode(cbuf,0x83); // ADD ESP,4
4075 emit_opcode(cbuf,0xC4);
4076 emit_d8(cbuf, $primary ? 0x8 : 0x4);
4078 // CALL directly to the runtime
4079 cbuf.set_inst_mark();
4080 emit_opcode(cbuf,0xE8); // Call into runtime
4081 emit_d32_reloc(cbuf, (StubRoutines::d2i_wrapper() - cbuf.code_end()) - 4, runtime_call_Relocation::spec(), RELOC_IMM32 );
4083 // Carry on here...
4084 %}
4086 enc_class X2D_encoding( regD dst, regX src ) %{
4087 // Allocate a word
4088 emit_opcode(cbuf,0x83); // SUB ESP,4
4089 emit_opcode(cbuf,0xEC);
4090 emit_d8(cbuf,0x04);
4092 emit_opcode (cbuf, 0xF3 ); // MOVSS [ESP], xmm
4093 emit_opcode (cbuf, 0x0F );
4094 emit_opcode (cbuf, 0x11 );
4095 encode_RegMem(cbuf, $src$$reg, ESP_enc, 0x4, 0, 0, false);
4097 emit_opcode(cbuf,0xD9 ); // FLD_S [ESP]
4098 encode_RegMem(cbuf, 0x0, ESP_enc, 0x4, 0, 0, false);
4100 emit_opcode(cbuf,0x83); // ADD ESP,4
4101 emit_opcode(cbuf,0xC4);
4102 emit_d8(cbuf,0x04);
4104 // Carry on here...
4105 %}
4107 enc_class AbsXF_encoding(regX dst) %{
4108 address signmask_address=(address)float_signmask_pool;
4109 // andpd:\tANDPS $dst,[signconst]
4110 emit_opcode(cbuf, 0x0F);
4111 emit_opcode(cbuf, 0x54);
4112 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4113 emit_d32(cbuf, (int)signmask_address);
4114 %}
4116 enc_class AbsXD_encoding(regXD dst) %{
4117 address signmask_address=(address)double_signmask_pool;
4118 // andpd:\tANDPD $dst,[signconst]
4119 emit_opcode(cbuf, 0x66);
4120 emit_opcode(cbuf, 0x0F);
4121 emit_opcode(cbuf, 0x54);
4122 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4123 emit_d32(cbuf, (int)signmask_address);
4124 %}
4126 enc_class NegXF_encoding(regX dst) %{
4127 address signmask_address=(address)float_signflip_pool;
4128 // andpd:\tXORPS $dst,[signconst]
4129 emit_opcode(cbuf, 0x0F);
4130 emit_opcode(cbuf, 0x57);
4131 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4132 emit_d32(cbuf, (int)signmask_address);
4133 %}
4135 enc_class NegXD_encoding(regXD dst) %{
4136 address signmask_address=(address)double_signflip_pool;
4137 // andpd:\tXORPD $dst,[signconst]
4138 emit_opcode(cbuf, 0x66);
4139 emit_opcode(cbuf, 0x0F);
4140 emit_opcode(cbuf, 0x57);
4141 emit_rm(cbuf, 0x0, $dst$$reg, 0x5);
4142 emit_d32(cbuf, (int)signmask_address);
4143 %}
4145 enc_class FMul_ST_reg( eRegF src1 ) %{
4146 // Operand was loaded from memory into fp ST (stack top)
4147 // FMUL ST,$src /* D8 C8+i */
4148 emit_opcode(cbuf, 0xD8);
4149 emit_opcode(cbuf, 0xC8 + $src1$$reg);
4150 %}
4152 enc_class FAdd_ST_reg( eRegF src2 ) %{
4153 // FADDP ST,src2 /* D8 C0+i */
4154 emit_opcode(cbuf, 0xD8);
4155 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4156 //could use FADDP src2,fpST /* DE C0+i */
4157 %}
4159 enc_class FAddP_reg_ST( eRegF src2 ) %{
4160 // FADDP src2,ST /* DE C0+i */
4161 emit_opcode(cbuf, 0xDE);
4162 emit_opcode(cbuf, 0xC0 + $src2$$reg);
4163 %}
4165 enc_class subF_divF_encode( eRegF src1, eRegF src2) %{
4166 // Operand has been loaded into fp ST (stack top)
4167 // FSUB ST,$src1
4168 emit_opcode(cbuf, 0xD8);
4169 emit_opcode(cbuf, 0xE0 + $src1$$reg);
4171 // FDIV
4172 emit_opcode(cbuf, 0xD8);
4173 emit_opcode(cbuf, 0xF0 + $src2$$reg);
4174 %}
4176 enc_class MulFAddF (eRegF src1, eRegF src2) %{
4177 // Operand was loaded from memory into fp ST (stack top)
4178 // FADD ST,$src /* D8 C0+i */
4179 emit_opcode(cbuf, 0xD8);
4180 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4182 // FMUL ST,src2 /* D8 C*+i */
4183 emit_opcode(cbuf, 0xD8);
4184 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4185 %}
4188 enc_class MulFAddFreverse (eRegF src1, eRegF src2) %{
4189 // Operand was loaded from memory into fp ST (stack top)
4190 // FADD ST,$src /* D8 C0+i */
4191 emit_opcode(cbuf, 0xD8);
4192 emit_opcode(cbuf, 0xC0 + $src1$$reg);
4194 // FMULP src2,ST /* DE C8+i */
4195 emit_opcode(cbuf, 0xDE);
4196 emit_opcode(cbuf, 0xC8 + $src2$$reg);
4197 %}
4199 // Atomically load the volatile long
4200 enc_class enc_loadL_volatile( memory mem, stackSlotL dst ) %{
4201 emit_opcode(cbuf,0xDF);
4202 int rm_byte_opcode = 0x05;
4203 int base = $mem$$base;
4204 int index = $mem$$index;
4205 int scale = $mem$$scale;
4206 int displace = $mem$$disp;
4207 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4208 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4209 store_to_stackslot( cbuf, 0x0DF, 0x07, $dst$$disp );
4210 %}
4212 enc_class enc_loadLX_volatile( memory mem, stackSlotL dst, regXD tmp ) %{
4213 { // Atomic long load
4214 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4215 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4216 emit_opcode(cbuf,0x0F);
4217 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4218 int base = $mem$$base;
4219 int index = $mem$$index;
4220 int scale = $mem$$scale;
4221 int displace = $mem$$disp;
4222 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4223 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4224 }
4225 { // MOVSD $dst,$tmp ! atomic long store
4226 emit_opcode(cbuf,0xF2);
4227 emit_opcode(cbuf,0x0F);
4228 emit_opcode(cbuf,0x11);
4229 int base = $dst$$base;
4230 int index = $dst$$index;
4231 int scale = $dst$$scale;
4232 int displace = $dst$$disp;
4233 bool disp_is_oop = $dst->disp_is_oop(); // disp-as-oop when working with static globals
4234 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4235 }
4236 %}
4238 enc_class enc_loadLX_reg_volatile( memory mem, eRegL dst, regXD tmp ) %{
4239 { // Atomic long load
4240 // UseXmmLoadAndClearUpper ? movsd $tmp,$mem : movlpd $tmp,$mem
4241 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4242 emit_opcode(cbuf,0x0F);
4243 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4244 int base = $mem$$base;
4245 int index = $mem$$index;
4246 int scale = $mem$$scale;
4247 int displace = $mem$$disp;
4248 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4249 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4250 }
4251 { // MOVD $dst.lo,$tmp
4252 emit_opcode(cbuf,0x66);
4253 emit_opcode(cbuf,0x0F);
4254 emit_opcode(cbuf,0x7E);
4255 emit_rm(cbuf, 0x3, $tmp$$reg, $dst$$reg);
4256 }
4257 { // PSRLQ $tmp,32
4258 emit_opcode(cbuf,0x66);
4259 emit_opcode(cbuf,0x0F);
4260 emit_opcode(cbuf,0x73);
4261 emit_rm(cbuf, 0x3, 0x02, $tmp$$reg);
4262 emit_d8(cbuf, 0x20);
4263 }
4264 { // MOVD $dst.hi,$tmp
4265 emit_opcode(cbuf,0x66);
4266 emit_opcode(cbuf,0x0F);
4267 emit_opcode(cbuf,0x7E);
4268 emit_rm(cbuf, 0x3, $tmp$$reg, HIGH_FROM_LOW($dst$$reg));
4269 }
4270 %}
4272 // Volatile Store Long. Must be atomic, so move it into
4273 // the FP TOS and then do a 64-bit FIST. Has to probe the
4274 // target address before the store (for null-ptr checks)
4275 // so the memory operand is used twice in the encoding.
4276 enc_class enc_storeL_volatile( memory mem, stackSlotL src ) %{
4277 store_to_stackslot( cbuf, 0x0DF, 0x05, $src$$disp );
4278 cbuf.set_inst_mark(); // Mark start of FIST in case $mem has an oop
4279 emit_opcode(cbuf,0xDF);
4280 int rm_byte_opcode = 0x07;
4281 int base = $mem$$base;
4282 int index = $mem$$index;
4283 int scale = $mem$$scale;
4284 int displace = $mem$$disp;
4285 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4286 encode_RegMem(cbuf, rm_byte_opcode, base, index, scale, displace, disp_is_oop);
4287 %}
4289 enc_class enc_storeLX_volatile( memory mem, stackSlotL src, regXD tmp) %{
4290 { // Atomic long load
4291 // UseXmmLoadAndClearUpper ? movsd $tmp,[$src] : movlpd $tmp,[$src]
4292 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0xF2 : 0x66);
4293 emit_opcode(cbuf,0x0F);
4294 emit_opcode(cbuf,UseXmmLoadAndClearUpper ? 0x10 : 0x12);
4295 int base = $src$$base;
4296 int index = $src$$index;
4297 int scale = $src$$scale;
4298 int displace = $src$$disp;
4299 bool disp_is_oop = $src->disp_is_oop(); // disp-as-oop when working with static globals
4300 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4301 }
4302 cbuf.set_inst_mark(); // Mark start of MOVSD in case $mem has an oop
4303 { // MOVSD $mem,$tmp ! atomic long store
4304 emit_opcode(cbuf,0xF2);
4305 emit_opcode(cbuf,0x0F);
4306 emit_opcode(cbuf,0x11);
4307 int base = $mem$$base;
4308 int index = $mem$$index;
4309 int scale = $mem$$scale;
4310 int displace = $mem$$disp;
4311 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4312 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4313 }
4314 %}
4316 enc_class enc_storeLX_reg_volatile( memory mem, eRegL src, regXD tmp, regXD tmp2) %{
4317 { // MOVD $tmp,$src.lo
4318 emit_opcode(cbuf,0x66);
4319 emit_opcode(cbuf,0x0F);
4320 emit_opcode(cbuf,0x6E);
4321 emit_rm(cbuf, 0x3, $tmp$$reg, $src$$reg);
4322 }
4323 { // MOVD $tmp2,$src.hi
4324 emit_opcode(cbuf,0x66);
4325 emit_opcode(cbuf,0x0F);
4326 emit_opcode(cbuf,0x6E);
4327 emit_rm(cbuf, 0x3, $tmp2$$reg, HIGH_FROM_LOW($src$$reg));
4328 }
4329 { // PUNPCKLDQ $tmp,$tmp2
4330 emit_opcode(cbuf,0x66);
4331 emit_opcode(cbuf,0x0F);
4332 emit_opcode(cbuf,0x62);
4333 emit_rm(cbuf, 0x3, $tmp$$reg, $tmp2$$reg);
4334 }
4335 cbuf.set_inst_mark(); // Mark start of MOVSD in case $mem has an oop
4336 { // MOVSD $mem,$tmp ! atomic long store
4337 emit_opcode(cbuf,0xF2);
4338 emit_opcode(cbuf,0x0F);
4339 emit_opcode(cbuf,0x11);
4340 int base = $mem$$base;
4341 int index = $mem$$index;
4342 int scale = $mem$$scale;
4343 int displace = $mem$$disp;
4344 bool disp_is_oop = $mem->disp_is_oop(); // disp-as-oop when working with static globals
4345 encode_RegMem(cbuf, $tmp$$reg, base, index, scale, displace, disp_is_oop);
4346 }
4347 %}
4349 // Safepoint Poll. This polls the safepoint page, and causes an
4350 // exception if it is not readable. Unfortunately, it kills the condition code
4351 // in the process
4352 // We current use TESTL [spp],EDI
4353 // A better choice might be TESTB [spp + pagesize() - CacheLineSize()],0
4355 enc_class Safepoint_Poll() %{
4356 cbuf.relocate(cbuf.inst_mark(), relocInfo::poll_type, 0);
4357 emit_opcode(cbuf,0x85);
4358 emit_rm (cbuf, 0x0, 0x7, 0x5);
4359 emit_d32(cbuf, (intptr_t)os::get_polling_page());
4360 %}
4361 %}
4364 //----------FRAME--------------------------------------------------------------
4365 // Definition of frame structure and management information.
4366 //
4367 // S T A C K L A Y O U T Allocators stack-slot number
4368 // | (to get allocators register number
4369 // G Owned by | | v add OptoReg::stack0())
4370 // r CALLER | |
4371 // o | +--------+ pad to even-align allocators stack-slot
4372 // w V | pad0 | numbers; owned by CALLER
4373 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned
4374 // h ^ | in | 5
4375 // | | args | 4 Holes in incoming args owned by SELF
4376 // | | | | 3
4377 // | | +--------+
4378 // V | | old out| Empty on Intel, window on Sparc
4379 // | old |preserve| Must be even aligned.
4380 // | SP-+--------+----> Matcher::_old_SP, even aligned
4381 // | | in | 3 area for Intel ret address
4382 // Owned by |preserve| Empty on Sparc.
4383 // SELF +--------+
4384 // | | pad2 | 2 pad to align old SP
4385 // | +--------+ 1
4386 // | | locks | 0
4387 // | +--------+----> OptoReg::stack0(), even aligned
4388 // | | pad1 | 11 pad to align new SP
4389 // | +--------+
4390 // | | | 10
4391 // | | spills | 9 spills
4392 // V | | 8 (pad0 slot for callee)
4393 // -----------+--------+----> Matcher::_out_arg_limit, unaligned
4394 // ^ | out | 7
4395 // | | args | 6 Holes in outgoing args owned by CALLEE
4396 // Owned by +--------+
4397 // CALLEE | new out| 6 Empty on Intel, window on Sparc
4398 // | new |preserve| Must be even-aligned.
4399 // | SP-+--------+----> Matcher::_new_SP, even aligned
4400 // | | |
4401 //
4402 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is
4403 // known from SELF's arguments and the Java calling convention.
4404 // Region 6-7 is determined per call site.
4405 // Note 2: If the calling convention leaves holes in the incoming argument
4406 // area, those holes are owned by SELF. Holes in the outgoing area
4407 // are owned by the CALLEE. Holes should not be nessecary in the
4408 // incoming area, as the Java calling convention is completely under
4409 // the control of the AD file. Doubles can be sorted and packed to
4410 // avoid holes. Holes in the outgoing arguments may be nessecary for
4411 // varargs C calling conventions.
4412 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is
4413 // even aligned with pad0 as needed.
4414 // Region 6 is even aligned. Region 6-7 is NOT even aligned;
4415 // region 6-11 is even aligned; it may be padded out more so that
4416 // the region from SP to FP meets the minimum stack alignment.
4418 frame %{
4419 // What direction does stack grow in (assumed to be same for C & Java)
4420 stack_direction(TOWARDS_LOW);
4422 // These three registers define part of the calling convention
4423 // between compiled code and the interpreter.
4424 inline_cache_reg(EAX); // Inline Cache Register
4425 interpreter_method_oop_reg(EBX); // Method Oop Register when calling interpreter
4427 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset]
4428 cisc_spilling_operand_name(indOffset32);
4430 // Number of stack slots consumed by locking an object
4431 sync_stack_slots(1);
4433 // Compiled code's Frame Pointer
4434 frame_pointer(ESP);
4435 // Interpreter stores its frame pointer in a register which is
4436 // stored to the stack by I2CAdaptors.
4437 // I2CAdaptors convert from interpreted java to compiled java.
4438 interpreter_frame_pointer(EBP);
4440 // Stack alignment requirement
4441 // Alignment size in bytes (128-bit -> 16 bytes)
4442 stack_alignment(StackAlignmentInBytes);
4444 // Number of stack slots between incoming argument block and the start of
4445 // a new frame. The PROLOG must add this many slots to the stack. The
4446 // EPILOG must remove this many slots. Intel needs one slot for
4447 // return address and one for rbp, (must save rbp)
4448 in_preserve_stack_slots(2+VerifyStackAtCalls);
4450 // Number of outgoing stack slots killed above the out_preserve_stack_slots
4451 // for calls to C. Supports the var-args backing area for register parms.
4452 varargs_C_out_slots_killed(0);
4454 // The after-PROLOG location of the return address. Location of
4455 // return address specifies a type (REG or STACK) and a number
4456 // representing the register number (i.e. - use a register name) or
4457 // stack slot.
4458 // Ret Addr is on stack in slot 0 if no locks or verification or alignment.
4459 // Otherwise, it is above the locks and verification slot and alignment word
4460 return_addr(STACK - 1 +
4461 round_to(1+VerifyStackAtCalls+
4462 Compile::current()->fixed_slots(),
4463 (StackAlignmentInBytes/wordSize)));
4465 // Body of function which returns an integer array locating
4466 // arguments either in registers or in stack slots. Passed an array
4467 // of ideal registers called "sig" and a "length" count. Stack-slot
4468 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4469 // arguments for a CALLEE. Incoming stack arguments are
4470 // automatically biased by the preserve_stack_slots field above.
4471 calling_convention %{
4472 // No difference between ingoing/outgoing just pass false
4473 SharedRuntime::java_calling_convention(sig_bt, regs, length, false);
4474 %}
4477 // Body of function which returns an integer array locating
4478 // arguments either in registers or in stack slots. Passed an array
4479 // of ideal registers called "sig" and a "length" count. Stack-slot
4480 // offsets are based on outgoing arguments, i.e. a CALLER setting up
4481 // arguments for a CALLEE. Incoming stack arguments are
4482 // automatically biased by the preserve_stack_slots field above.
4483 c_calling_convention %{
4484 // This is obviously always outgoing
4485 (void) SharedRuntime::c_calling_convention(sig_bt, regs, length);
4486 %}
4488 // Location of C & interpreter return values
4489 c_return_value %{
4490 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4491 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4492 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4494 // in SSE2+ mode we want to keep the FPU stack clean so pretend
4495 // that C functions return float and double results in XMM0.
4496 if( ideal_reg == Op_RegD && UseSSE>=2 )
4497 return OptoRegPair(XMM0b_num,XMM0a_num);
4498 if( ideal_reg == Op_RegF && UseSSE>=2 )
4499 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4501 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4502 %}
4504 // Location of return values
4505 return_value %{
4506 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" );
4507 static int lo[Op_RegL+1] = { 0, 0, OptoReg::Bad, EAX_num, EAX_num, FPR1L_num, FPR1L_num, EAX_num };
4508 static int hi[Op_RegL+1] = { 0, 0, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, FPR1H_num, EDX_num };
4509 if( ideal_reg == Op_RegD && UseSSE>=2 )
4510 return OptoRegPair(XMM0b_num,XMM0a_num);
4511 if( ideal_reg == Op_RegF && UseSSE>=1 )
4512 return OptoRegPair(OptoReg::Bad,XMM0a_num);
4513 return OptoRegPair(hi[ideal_reg],lo[ideal_reg]);
4514 %}
4516 %}
4518 //----------ATTRIBUTES---------------------------------------------------------
4519 //----------Operand Attributes-------------------------------------------------
4520 op_attrib op_cost(0); // Required cost attribute
4522 //----------Instruction Attributes---------------------------------------------
4523 ins_attrib ins_cost(100); // Required cost attribute
4524 ins_attrib ins_size(8); // Required size attribute (in bits)
4525 ins_attrib ins_pc_relative(0); // Required PC Relative flag
4526 ins_attrib ins_short_branch(0); // Required flag: is this instruction a
4527 // non-matching short branch variant of some
4528 // long branch?
4529 ins_attrib ins_alignment(1); // Required alignment attribute (must be a power of 2)
4530 // specifies the alignment that some part of the instruction (not
4531 // necessarily the start) requires. If > 1, a compute_padding()
4532 // function must be provided for the instruction
4534 //----------OPERANDS-----------------------------------------------------------
4535 // Operand definitions must precede instruction definitions for correct parsing
4536 // in the ADLC because operands constitute user defined types which are used in
4537 // instruction definitions.
4539 //----------Simple Operands----------------------------------------------------
4540 // Immediate Operands
4541 // Integer Immediate
4542 operand immI() %{
4543 match(ConI);
4545 op_cost(10);
4546 format %{ %}
4547 interface(CONST_INTER);
4548 %}
4550 // Constant for test vs zero
4551 operand immI0() %{
4552 predicate(n->get_int() == 0);
4553 match(ConI);
4555 op_cost(0);
4556 format %{ %}
4557 interface(CONST_INTER);
4558 %}
4560 // Constant for increment
4561 operand immI1() %{
4562 predicate(n->get_int() == 1);
4563 match(ConI);
4565 op_cost(0);
4566 format %{ %}
4567 interface(CONST_INTER);
4568 %}
4570 // Constant for decrement
4571 operand immI_M1() %{
4572 predicate(n->get_int() == -1);
4573 match(ConI);
4575 op_cost(0);
4576 format %{ %}
4577 interface(CONST_INTER);
4578 %}
4580 // Valid scale values for addressing modes
4581 operand immI2() %{
4582 predicate(0 <= n->get_int() && (n->get_int() <= 3));
4583 match(ConI);
4585 format %{ %}
4586 interface(CONST_INTER);
4587 %}
4589 operand immI8() %{
4590 predicate((-128 <= n->get_int()) && (n->get_int() <= 127));
4591 match(ConI);
4593 op_cost(5);
4594 format %{ %}
4595 interface(CONST_INTER);
4596 %}
4598 operand immI16() %{
4599 predicate((-32768 <= n->get_int()) && (n->get_int() <= 32767));
4600 match(ConI);
4602 op_cost(10);
4603 format %{ %}
4604 interface(CONST_INTER);
4605 %}
4607 // Constant for long shifts
4608 operand immI_32() %{
4609 predicate( n->get_int() == 32 );
4610 match(ConI);
4612 op_cost(0);
4613 format %{ %}
4614 interface(CONST_INTER);
4615 %}
4617 operand immI_1_31() %{
4618 predicate( n->get_int() >= 1 && n->get_int() <= 31 );
4619 match(ConI);
4621 op_cost(0);
4622 format %{ %}
4623 interface(CONST_INTER);
4624 %}
4626 operand immI_32_63() %{
4627 predicate( n->get_int() >= 32 && n->get_int() <= 63 );
4628 match(ConI);
4629 op_cost(0);
4631 format %{ %}
4632 interface(CONST_INTER);
4633 %}
4635 operand immI_1() %{
4636 predicate( n->get_int() == 1 );
4637 match(ConI);
4639 op_cost(0);
4640 format %{ %}
4641 interface(CONST_INTER);
4642 %}
4644 operand immI_2() %{
4645 predicate( n->get_int() == 2 );
4646 match(ConI);
4648 op_cost(0);
4649 format %{ %}
4650 interface(CONST_INTER);
4651 %}
4653 operand immI_3() %{
4654 predicate( n->get_int() == 3 );
4655 match(ConI);
4657 op_cost(0);
4658 format %{ %}
4659 interface(CONST_INTER);
4660 %}
4662 // Pointer Immediate
4663 operand immP() %{
4664 match(ConP);
4666 op_cost(10);
4667 format %{ %}
4668 interface(CONST_INTER);
4669 %}
4671 // NULL Pointer Immediate
4672 operand immP0() %{
4673 predicate( n->get_ptr() == 0 );
4674 match(ConP);
4675 op_cost(0);
4677 format %{ %}
4678 interface(CONST_INTER);
4679 %}
4681 // Long Immediate
4682 operand immL() %{
4683 match(ConL);
4685 op_cost(20);
4686 format %{ %}
4687 interface(CONST_INTER);
4688 %}
4690 // Long Immediate zero
4691 operand immL0() %{
4692 predicate( n->get_long() == 0L );
4693 match(ConL);
4694 op_cost(0);
4696 format %{ %}
4697 interface(CONST_INTER);
4698 %}
4700 // Long Immediate zero
4701 operand immL_M1() %{
4702 predicate( n->get_long() == -1L );
4703 match(ConL);
4704 op_cost(0);
4706 format %{ %}
4707 interface(CONST_INTER);
4708 %}
4710 // Long immediate from 0 to 127.
4711 // Used for a shorter form of long mul by 10.
4712 operand immL_127() %{
4713 predicate((0 <= n->get_long()) && (n->get_long() <= 127));
4714 match(ConL);
4715 op_cost(0);
4717 format %{ %}
4718 interface(CONST_INTER);
4719 %}
4721 // Long Immediate: low 32-bit mask
4722 operand immL_32bits() %{
4723 predicate(n->get_long() == 0xFFFFFFFFL);
4724 match(ConL);
4725 op_cost(0);
4727 format %{ %}
4728 interface(CONST_INTER);
4729 %}
4731 // Long Immediate: low 32-bit mask
4732 operand immL32() %{
4733 predicate(n->get_long() == (int)(n->get_long()));
4734 match(ConL);
4735 op_cost(20);
4737 format %{ %}
4738 interface(CONST_INTER);
4739 %}
4741 //Double Immediate zero
4742 operand immD0() %{
4743 // Do additional (and counter-intuitive) test against NaN to work around VC++
4744 // bug that generates code such that NaNs compare equal to 0.0
4745 predicate( UseSSE<=1 && n->getd() == 0.0 && !g_isnan(n->getd()) );
4746 match(ConD);
4748 op_cost(5);
4749 format %{ %}
4750 interface(CONST_INTER);
4751 %}
4753 // Double Immediate
4754 operand immD1() %{
4755 predicate( UseSSE<=1 && n->getd() == 1.0 );
4756 match(ConD);
4758 op_cost(5);
4759 format %{ %}
4760 interface(CONST_INTER);
4761 %}
4763 // Double Immediate
4764 operand immD() %{
4765 predicate(UseSSE<=1);
4766 match(ConD);
4768 op_cost(5);
4769 format %{ %}
4770 interface(CONST_INTER);
4771 %}
4773 operand immXD() %{
4774 predicate(UseSSE>=2);
4775 match(ConD);
4777 op_cost(5);
4778 format %{ %}
4779 interface(CONST_INTER);
4780 %}
4782 // Double Immediate zero
4783 operand immXD0() %{
4784 // Do additional (and counter-intuitive) test against NaN to work around VC++
4785 // bug that generates code such that NaNs compare equal to 0.0 AND do not
4786 // compare equal to -0.0.
4787 predicate( UseSSE>=2 && jlong_cast(n->getd()) == 0 );
4788 match(ConD);
4790 format %{ %}
4791 interface(CONST_INTER);
4792 %}
4794 // Float Immediate zero
4795 operand immF0() %{
4796 predicate( UseSSE == 0 && n->getf() == 0.0 );
4797 match(ConF);
4799 op_cost(5);
4800 format %{ %}
4801 interface(CONST_INTER);
4802 %}
4804 // Float Immediate
4805 operand immF() %{
4806 predicate( UseSSE == 0 );
4807 match(ConF);
4809 op_cost(5);
4810 format %{ %}
4811 interface(CONST_INTER);
4812 %}
4814 // Float Immediate
4815 operand immXF() %{
4816 predicate(UseSSE >= 1);
4817 match(ConF);
4819 op_cost(5);
4820 format %{ %}
4821 interface(CONST_INTER);
4822 %}
4824 // Float Immediate zero. Zero and not -0.0
4825 operand immXF0() %{
4826 predicate( UseSSE >= 1 && jint_cast(n->getf()) == 0 );
4827 match(ConF);
4829 op_cost(5);
4830 format %{ %}
4831 interface(CONST_INTER);
4832 %}
4834 // Immediates for special shifts (sign extend)
4836 // Constants for increment
4837 operand immI_16() %{
4838 predicate( n->get_int() == 16 );
4839 match(ConI);
4841 format %{ %}
4842 interface(CONST_INTER);
4843 %}
4845 operand immI_24() %{
4846 predicate( n->get_int() == 24 );
4847 match(ConI);
4849 format %{ %}
4850 interface(CONST_INTER);
4851 %}
4853 // Constant for byte-wide masking
4854 operand immI_255() %{
4855 predicate( n->get_int() == 255 );
4856 match(ConI);
4858 format %{ %}
4859 interface(CONST_INTER);
4860 %}
4862 // Constant for short-wide masking
4863 operand immI_65535() %{
4864 predicate(n->get_int() == 65535);
4865 match(ConI);
4867 format %{ %}
4868 interface(CONST_INTER);
4869 %}
4871 // Register Operands
4872 // Integer Register
4873 operand eRegI() %{
4874 constraint(ALLOC_IN_RC(e_reg));
4875 match(RegI);
4876 match(xRegI);
4877 match(eAXRegI);
4878 match(eBXRegI);
4879 match(eCXRegI);
4880 match(eDXRegI);
4881 match(eDIRegI);
4882 match(eSIRegI);
4884 format %{ %}
4885 interface(REG_INTER);
4886 %}
4888 // Subset of Integer Register
4889 operand xRegI(eRegI reg) %{
4890 constraint(ALLOC_IN_RC(x_reg));
4891 match(reg);
4892 match(eAXRegI);
4893 match(eBXRegI);
4894 match(eCXRegI);
4895 match(eDXRegI);
4897 format %{ %}
4898 interface(REG_INTER);
4899 %}
4901 // Special Registers
4902 operand eAXRegI(xRegI reg) %{
4903 constraint(ALLOC_IN_RC(eax_reg));
4904 match(reg);
4905 match(eRegI);
4907 format %{ "EAX" %}
4908 interface(REG_INTER);
4909 %}
4911 // Special Registers
4912 operand eBXRegI(xRegI reg) %{
4913 constraint(ALLOC_IN_RC(ebx_reg));
4914 match(reg);
4915 match(eRegI);
4917 format %{ "EBX" %}
4918 interface(REG_INTER);
4919 %}
4921 operand eCXRegI(xRegI reg) %{
4922 constraint(ALLOC_IN_RC(ecx_reg));
4923 match(reg);
4924 match(eRegI);
4926 format %{ "ECX" %}
4927 interface(REG_INTER);
4928 %}
4930 operand eDXRegI(xRegI reg) %{
4931 constraint(ALLOC_IN_RC(edx_reg));
4932 match(reg);
4933 match(eRegI);
4935 format %{ "EDX" %}
4936 interface(REG_INTER);
4937 %}
4939 operand eDIRegI(xRegI reg) %{
4940 constraint(ALLOC_IN_RC(edi_reg));
4941 match(reg);
4942 match(eRegI);
4944 format %{ "EDI" %}
4945 interface(REG_INTER);
4946 %}
4948 operand naxRegI() %{
4949 constraint(ALLOC_IN_RC(nax_reg));
4950 match(RegI);
4951 match(eCXRegI);
4952 match(eDXRegI);
4953 match(eSIRegI);
4954 match(eDIRegI);
4956 format %{ %}
4957 interface(REG_INTER);
4958 %}
4960 operand nadxRegI() %{
4961 constraint(ALLOC_IN_RC(nadx_reg));
4962 match(RegI);
4963 match(eBXRegI);
4964 match(eCXRegI);
4965 match(eSIRegI);
4966 match(eDIRegI);
4968 format %{ %}
4969 interface(REG_INTER);
4970 %}
4972 operand ncxRegI() %{
4973 constraint(ALLOC_IN_RC(ncx_reg));
4974 match(RegI);
4975 match(eAXRegI);
4976 match(eDXRegI);
4977 match(eSIRegI);
4978 match(eDIRegI);
4980 format %{ %}
4981 interface(REG_INTER);
4982 %}
4984 // // This operand was used by cmpFastUnlock, but conflicted with 'object' reg
4985 // //
4986 operand eSIRegI(xRegI reg) %{
4987 constraint(ALLOC_IN_RC(esi_reg));
4988 match(reg);
4989 match(eRegI);
4991 format %{ "ESI" %}
4992 interface(REG_INTER);
4993 %}
4995 // Pointer Register
4996 operand anyRegP() %{
4997 constraint(ALLOC_IN_RC(any_reg));
4998 match(RegP);
4999 match(eAXRegP);
5000 match(eBXRegP);
5001 match(eCXRegP);
5002 match(eDIRegP);
5003 match(eRegP);
5005 format %{ %}
5006 interface(REG_INTER);
5007 %}
5009 operand eRegP() %{
5010 constraint(ALLOC_IN_RC(e_reg));
5011 match(RegP);
5012 match(eAXRegP);
5013 match(eBXRegP);
5014 match(eCXRegP);
5015 match(eDIRegP);
5017 format %{ %}
5018 interface(REG_INTER);
5019 %}
5021 // On windows95, EBP is not safe to use for implicit null tests.
5022 operand eRegP_no_EBP() %{
5023 constraint(ALLOC_IN_RC(e_reg_no_rbp));
5024 match(RegP);
5025 match(eAXRegP);
5026 match(eBXRegP);
5027 match(eCXRegP);
5028 match(eDIRegP);
5030 op_cost(100);
5031 format %{ %}
5032 interface(REG_INTER);
5033 %}
5035 operand naxRegP() %{
5036 constraint(ALLOC_IN_RC(nax_reg));
5037 match(RegP);
5038 match(eBXRegP);
5039 match(eDXRegP);
5040 match(eCXRegP);
5041 match(eSIRegP);
5042 match(eDIRegP);
5044 format %{ %}
5045 interface(REG_INTER);
5046 %}
5048 operand nabxRegP() %{
5049 constraint(ALLOC_IN_RC(nabx_reg));
5050 match(RegP);
5051 match(eCXRegP);
5052 match(eDXRegP);
5053 match(eSIRegP);
5054 match(eDIRegP);
5056 format %{ %}
5057 interface(REG_INTER);
5058 %}
5060 operand pRegP() %{
5061 constraint(ALLOC_IN_RC(p_reg));
5062 match(RegP);
5063 match(eBXRegP);
5064 match(eDXRegP);
5065 match(eSIRegP);
5066 match(eDIRegP);
5068 format %{ %}
5069 interface(REG_INTER);
5070 %}
5072 // Special Registers
5073 // Return a pointer value
5074 operand eAXRegP(eRegP reg) %{
5075 constraint(ALLOC_IN_RC(eax_reg));
5076 match(reg);
5077 format %{ "EAX" %}
5078 interface(REG_INTER);
5079 %}
5081 // Used in AtomicAdd
5082 operand eBXRegP(eRegP reg) %{
5083 constraint(ALLOC_IN_RC(ebx_reg));
5084 match(reg);
5085 format %{ "EBX" %}
5086 interface(REG_INTER);
5087 %}
5089 // Tail-call (interprocedural jump) to interpreter
5090 operand eCXRegP(eRegP reg) %{
5091 constraint(ALLOC_IN_RC(ecx_reg));
5092 match(reg);
5093 format %{ "ECX" %}
5094 interface(REG_INTER);
5095 %}
5097 operand eSIRegP(eRegP reg) %{
5098 constraint(ALLOC_IN_RC(esi_reg));
5099 match(reg);
5100 format %{ "ESI" %}
5101 interface(REG_INTER);
5102 %}
5104 // Used in rep stosw
5105 operand eDIRegP(eRegP reg) %{
5106 constraint(ALLOC_IN_RC(edi_reg));
5107 match(reg);
5108 format %{ "EDI" %}
5109 interface(REG_INTER);
5110 %}
5112 operand eBPRegP() %{
5113 constraint(ALLOC_IN_RC(ebp_reg));
5114 match(RegP);
5115 format %{ "EBP" %}
5116 interface(REG_INTER);
5117 %}
5119 operand eRegL() %{
5120 constraint(ALLOC_IN_RC(long_reg));
5121 match(RegL);
5122 match(eADXRegL);
5124 format %{ %}
5125 interface(REG_INTER);
5126 %}
5128 operand eADXRegL( eRegL reg ) %{
5129 constraint(ALLOC_IN_RC(eadx_reg));
5130 match(reg);
5132 format %{ "EDX:EAX" %}
5133 interface(REG_INTER);
5134 %}
5136 operand eBCXRegL( eRegL reg ) %{
5137 constraint(ALLOC_IN_RC(ebcx_reg));
5138 match(reg);
5140 format %{ "EBX:ECX" %}
5141 interface(REG_INTER);
5142 %}
5144 // Special case for integer high multiply
5145 operand eADXRegL_low_only() %{
5146 constraint(ALLOC_IN_RC(eadx_reg));
5147 match(RegL);
5149 format %{ "EAX" %}
5150 interface(REG_INTER);
5151 %}
5153 // Flags register, used as output of compare instructions
5154 operand eFlagsReg() %{
5155 constraint(ALLOC_IN_RC(int_flags));
5156 match(RegFlags);
5158 format %{ "EFLAGS" %}
5159 interface(REG_INTER);
5160 %}
5162 // Flags register, used as output of FLOATING POINT compare instructions
5163 operand eFlagsRegU() %{
5164 constraint(ALLOC_IN_RC(int_flags));
5165 match(RegFlags);
5167 format %{ "EFLAGS_U" %}
5168 interface(REG_INTER);
5169 %}
5171 operand eFlagsRegUCF() %{
5172 constraint(ALLOC_IN_RC(int_flags));
5173 match(RegFlags);
5174 predicate(false);
5176 format %{ "EFLAGS_U_CF" %}
5177 interface(REG_INTER);
5178 %}
5180 // Condition Code Register used by long compare
5181 operand flagsReg_long_LTGE() %{
5182 constraint(ALLOC_IN_RC(int_flags));
5183 match(RegFlags);
5184 format %{ "FLAGS_LTGE" %}
5185 interface(REG_INTER);
5186 %}
5187 operand flagsReg_long_EQNE() %{
5188 constraint(ALLOC_IN_RC(int_flags));
5189 match(RegFlags);
5190 format %{ "FLAGS_EQNE" %}
5191 interface(REG_INTER);
5192 %}
5193 operand flagsReg_long_LEGT() %{
5194 constraint(ALLOC_IN_RC(int_flags));
5195 match(RegFlags);
5196 format %{ "FLAGS_LEGT" %}
5197 interface(REG_INTER);
5198 %}
5200 // Float register operands
5201 operand regD() %{
5202 predicate( UseSSE < 2 );
5203 constraint(ALLOC_IN_RC(dbl_reg));
5204 match(RegD);
5205 match(regDPR1);
5206 match(regDPR2);
5207 format %{ %}
5208 interface(REG_INTER);
5209 %}
5211 operand regDPR1(regD reg) %{
5212 predicate( UseSSE < 2 );
5213 constraint(ALLOC_IN_RC(dbl_reg0));
5214 match(reg);
5215 format %{ "FPR1" %}
5216 interface(REG_INTER);
5217 %}
5219 operand regDPR2(regD reg) %{
5220 predicate( UseSSE < 2 );
5221 constraint(ALLOC_IN_RC(dbl_reg1));
5222 match(reg);
5223 format %{ "FPR2" %}
5224 interface(REG_INTER);
5225 %}
5227 operand regnotDPR1(regD reg) %{
5228 predicate( UseSSE < 2 );
5229 constraint(ALLOC_IN_RC(dbl_notreg0));
5230 match(reg);
5231 format %{ %}
5232 interface(REG_INTER);
5233 %}
5235 // XMM Double register operands
5236 operand regXD() %{
5237 predicate( UseSSE>=2 );
5238 constraint(ALLOC_IN_RC(xdb_reg));
5239 match(RegD);
5240 match(regXD6);
5241 match(regXD7);
5242 format %{ %}
5243 interface(REG_INTER);
5244 %}
5246 // XMM6 double register operands
5247 operand regXD6(regXD reg) %{
5248 predicate( UseSSE>=2 );
5249 constraint(ALLOC_IN_RC(xdb_reg6));
5250 match(reg);
5251 format %{ "XMM6" %}
5252 interface(REG_INTER);
5253 %}
5255 // XMM7 double register operands
5256 operand regXD7(regXD reg) %{
5257 predicate( UseSSE>=2 );
5258 constraint(ALLOC_IN_RC(xdb_reg7));
5259 match(reg);
5260 format %{ "XMM7" %}
5261 interface(REG_INTER);
5262 %}
5264 // Float register operands
5265 operand regF() %{
5266 predicate( UseSSE < 2 );
5267 constraint(ALLOC_IN_RC(flt_reg));
5268 match(RegF);
5269 match(regFPR1);
5270 format %{ %}
5271 interface(REG_INTER);
5272 %}
5274 // Float register operands
5275 operand regFPR1(regF reg) %{
5276 predicate( UseSSE < 2 );
5277 constraint(ALLOC_IN_RC(flt_reg0));
5278 match(reg);
5279 format %{ "FPR1" %}
5280 interface(REG_INTER);
5281 %}
5283 // XMM register operands
5284 operand regX() %{
5285 predicate( UseSSE>=1 );
5286 constraint(ALLOC_IN_RC(xmm_reg));
5287 match(RegF);
5288 format %{ %}
5289 interface(REG_INTER);
5290 %}
5293 //----------Memory Operands----------------------------------------------------
5294 // Direct Memory Operand
5295 operand direct(immP addr) %{
5296 match(addr);
5298 format %{ "[$addr]" %}
5299 interface(MEMORY_INTER) %{
5300 base(0xFFFFFFFF);
5301 index(0x4);
5302 scale(0x0);
5303 disp($addr);
5304 %}
5305 %}
5307 // Indirect Memory Operand
5308 operand indirect(eRegP reg) %{
5309 constraint(ALLOC_IN_RC(e_reg));
5310 match(reg);
5312 format %{ "[$reg]" %}
5313 interface(MEMORY_INTER) %{
5314 base($reg);
5315 index(0x4);
5316 scale(0x0);
5317 disp(0x0);
5318 %}
5319 %}
5321 // Indirect Memory Plus Short Offset Operand
5322 operand indOffset8(eRegP reg, immI8 off) %{
5323 match(AddP reg off);
5325 format %{ "[$reg + $off]" %}
5326 interface(MEMORY_INTER) %{
5327 base($reg);
5328 index(0x4);
5329 scale(0x0);
5330 disp($off);
5331 %}
5332 %}
5334 // Indirect Memory Plus Long Offset Operand
5335 operand indOffset32(eRegP reg, immI off) %{
5336 match(AddP reg off);
5338 format %{ "[$reg + $off]" %}
5339 interface(MEMORY_INTER) %{
5340 base($reg);
5341 index(0x4);
5342 scale(0x0);
5343 disp($off);
5344 %}
5345 %}
5347 // Indirect Memory Plus Long Offset Operand
5348 operand indOffset32X(eRegI reg, immP off) %{
5349 match(AddP off reg);
5351 format %{ "[$reg + $off]" %}
5352 interface(MEMORY_INTER) %{
5353 base($reg);
5354 index(0x4);
5355 scale(0x0);
5356 disp($off);
5357 %}
5358 %}
5360 // Indirect Memory Plus Index Register Plus Offset Operand
5361 operand indIndexOffset(eRegP reg, eRegI ireg, immI off) %{
5362 match(AddP (AddP reg ireg) off);
5364 op_cost(10);
5365 format %{"[$reg + $off + $ireg]" %}
5366 interface(MEMORY_INTER) %{
5367 base($reg);
5368 index($ireg);
5369 scale(0x0);
5370 disp($off);
5371 %}
5372 %}
5374 // Indirect Memory Plus Index Register Plus Offset Operand
5375 operand indIndex(eRegP reg, eRegI ireg) %{
5376 match(AddP reg ireg);
5378 op_cost(10);
5379 format %{"[$reg + $ireg]" %}
5380 interface(MEMORY_INTER) %{
5381 base($reg);
5382 index($ireg);
5383 scale(0x0);
5384 disp(0x0);
5385 %}
5386 %}
5388 // // -------------------------------------------------------------------------
5389 // // 486 architecture doesn't support "scale * index + offset" with out a base
5390 // // -------------------------------------------------------------------------
5391 // // Scaled Memory Operands
5392 // // Indirect Memory Times Scale Plus Offset Operand
5393 // operand indScaleOffset(immP off, eRegI ireg, immI2 scale) %{
5394 // match(AddP off (LShiftI ireg scale));
5395 //
5396 // op_cost(10);
5397 // format %{"[$off + $ireg << $scale]" %}
5398 // interface(MEMORY_INTER) %{
5399 // base(0x4);
5400 // index($ireg);
5401 // scale($scale);
5402 // disp($off);
5403 // %}
5404 // %}
5406 // Indirect Memory Times Scale Plus Index Register
5407 operand indIndexScale(eRegP reg, eRegI ireg, immI2 scale) %{
5408 match(AddP reg (LShiftI ireg scale));
5410 op_cost(10);
5411 format %{"[$reg + $ireg << $scale]" %}
5412 interface(MEMORY_INTER) %{
5413 base($reg);
5414 index($ireg);
5415 scale($scale);
5416 disp(0x0);
5417 %}
5418 %}
5420 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5421 operand indIndexScaleOffset(eRegP reg, immI off, eRegI ireg, immI2 scale) %{
5422 match(AddP (AddP reg (LShiftI ireg scale)) off);
5424 op_cost(10);
5425 format %{"[$reg + $off + $ireg << $scale]" %}
5426 interface(MEMORY_INTER) %{
5427 base($reg);
5428 index($ireg);
5429 scale($scale);
5430 disp($off);
5431 %}
5432 %}
5434 //----------Load Long Memory Operands------------------------------------------
5435 // The load-long idiom will use it's address expression again after loading
5436 // the first word of the long. If the load-long destination overlaps with
5437 // registers used in the addressing expression, the 2nd half will be loaded
5438 // from a clobbered address. Fix this by requiring that load-long use
5439 // address registers that do not overlap with the load-long target.
5441 // load-long support
5442 operand load_long_RegP() %{
5443 constraint(ALLOC_IN_RC(esi_reg));
5444 match(RegP);
5445 match(eSIRegP);
5446 op_cost(100);
5447 format %{ %}
5448 interface(REG_INTER);
5449 %}
5451 // Indirect Memory Operand Long
5452 operand load_long_indirect(load_long_RegP reg) %{
5453 constraint(ALLOC_IN_RC(esi_reg));
5454 match(reg);
5456 format %{ "[$reg]" %}
5457 interface(MEMORY_INTER) %{
5458 base($reg);
5459 index(0x4);
5460 scale(0x0);
5461 disp(0x0);
5462 %}
5463 %}
5465 // Indirect Memory Plus Long Offset Operand
5466 operand load_long_indOffset32(load_long_RegP reg, immI off) %{
5467 match(AddP reg off);
5469 format %{ "[$reg + $off]" %}
5470 interface(MEMORY_INTER) %{
5471 base($reg);
5472 index(0x4);
5473 scale(0x0);
5474 disp($off);
5475 %}
5476 %}
5478 opclass load_long_memory(load_long_indirect, load_long_indOffset32);
5481 //----------Special Memory Operands--------------------------------------------
5482 // Stack Slot Operand - This operand is used for loading and storing temporary
5483 // values on the stack where a match requires a value to
5484 // flow through memory.
5485 operand stackSlotP(sRegP reg) %{
5486 constraint(ALLOC_IN_RC(stack_slots));
5487 // No match rule because this operand is only generated in matching
5488 format %{ "[$reg]" %}
5489 interface(MEMORY_INTER) %{
5490 base(0x4); // ESP
5491 index(0x4); // No Index
5492 scale(0x0); // No Scale
5493 disp($reg); // Stack Offset
5494 %}
5495 %}
5497 operand stackSlotI(sRegI reg) %{
5498 constraint(ALLOC_IN_RC(stack_slots));
5499 // No match rule because this operand is only generated in matching
5500 format %{ "[$reg]" %}
5501 interface(MEMORY_INTER) %{
5502 base(0x4); // ESP
5503 index(0x4); // No Index
5504 scale(0x0); // No Scale
5505 disp($reg); // Stack Offset
5506 %}
5507 %}
5509 operand stackSlotF(sRegF reg) %{
5510 constraint(ALLOC_IN_RC(stack_slots));
5511 // No match rule because this operand is only generated in matching
5512 format %{ "[$reg]" %}
5513 interface(MEMORY_INTER) %{
5514 base(0x4); // ESP
5515 index(0x4); // No Index
5516 scale(0x0); // No Scale
5517 disp($reg); // Stack Offset
5518 %}
5519 %}
5521 operand stackSlotD(sRegD reg) %{
5522 constraint(ALLOC_IN_RC(stack_slots));
5523 // No match rule because this operand is only generated in matching
5524 format %{ "[$reg]" %}
5525 interface(MEMORY_INTER) %{
5526 base(0x4); // ESP
5527 index(0x4); // No Index
5528 scale(0x0); // No Scale
5529 disp($reg); // Stack Offset
5530 %}
5531 %}
5533 operand stackSlotL(sRegL reg) %{
5534 constraint(ALLOC_IN_RC(stack_slots));
5535 // No match rule because this operand is only generated in matching
5536 format %{ "[$reg]" %}
5537 interface(MEMORY_INTER) %{
5538 base(0x4); // ESP
5539 index(0x4); // No Index
5540 scale(0x0); // No Scale
5541 disp($reg); // Stack Offset
5542 %}
5543 %}
5545 //----------Memory Operands - Win95 Implicit Null Variants----------------
5546 // Indirect Memory Operand
5547 operand indirect_win95_safe(eRegP_no_EBP reg)
5548 %{
5549 constraint(ALLOC_IN_RC(e_reg));
5550 match(reg);
5552 op_cost(100);
5553 format %{ "[$reg]" %}
5554 interface(MEMORY_INTER) %{
5555 base($reg);
5556 index(0x4);
5557 scale(0x0);
5558 disp(0x0);
5559 %}
5560 %}
5562 // Indirect Memory Plus Short Offset Operand
5563 operand indOffset8_win95_safe(eRegP_no_EBP reg, immI8 off)
5564 %{
5565 match(AddP reg off);
5567 op_cost(100);
5568 format %{ "[$reg + $off]" %}
5569 interface(MEMORY_INTER) %{
5570 base($reg);
5571 index(0x4);
5572 scale(0x0);
5573 disp($off);
5574 %}
5575 %}
5577 // Indirect Memory Plus Long Offset Operand
5578 operand indOffset32_win95_safe(eRegP_no_EBP reg, immI off)
5579 %{
5580 match(AddP reg off);
5582 op_cost(100);
5583 format %{ "[$reg + $off]" %}
5584 interface(MEMORY_INTER) %{
5585 base($reg);
5586 index(0x4);
5587 scale(0x0);
5588 disp($off);
5589 %}
5590 %}
5592 // Indirect Memory Plus Index Register Plus Offset Operand
5593 operand indIndexOffset_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI off)
5594 %{
5595 match(AddP (AddP reg ireg) off);
5597 op_cost(100);
5598 format %{"[$reg + $off + $ireg]" %}
5599 interface(MEMORY_INTER) %{
5600 base($reg);
5601 index($ireg);
5602 scale(0x0);
5603 disp($off);
5604 %}
5605 %}
5607 // Indirect Memory Times Scale Plus Index Register
5608 operand indIndexScale_win95_safe(eRegP_no_EBP reg, eRegI ireg, immI2 scale)
5609 %{
5610 match(AddP reg (LShiftI ireg scale));
5612 op_cost(100);
5613 format %{"[$reg + $ireg << $scale]" %}
5614 interface(MEMORY_INTER) %{
5615 base($reg);
5616 index($ireg);
5617 scale($scale);
5618 disp(0x0);
5619 %}
5620 %}
5622 // Indirect Memory Times Scale Plus Index Register Plus Offset Operand
5623 operand indIndexScaleOffset_win95_safe(eRegP_no_EBP reg, immI off, eRegI ireg, immI2 scale)
5624 %{
5625 match(AddP (AddP reg (LShiftI ireg scale)) off);
5627 op_cost(100);
5628 format %{"[$reg + $off + $ireg << $scale]" %}
5629 interface(MEMORY_INTER) %{
5630 base($reg);
5631 index($ireg);
5632 scale($scale);
5633 disp($off);
5634 %}
5635 %}
5637 //----------Conditional Branch Operands----------------------------------------
5638 // Comparison Op - This is the operation of the comparison, and is limited to
5639 // the following set of codes:
5640 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=)
5641 //
5642 // Other attributes of the comparison, such as unsignedness, are specified
5643 // by the comparison instruction that sets a condition code flags register.
5644 // That result is represented by a flags operand whose subtype is appropriate
5645 // to the unsignedness (etc.) of the comparison.
5646 //
5647 // Later, the instruction which matches both the Comparison Op (a Bool) and
5648 // the flags (produced by the Cmp) specifies the coding of the comparison op
5649 // by matching a specific subtype of Bool operand below, such as cmpOpU.
5651 // Comparision Code
5652 operand cmpOp() %{
5653 match(Bool);
5655 format %{ "" %}
5656 interface(COND_INTER) %{
5657 equal(0x4, "e");
5658 not_equal(0x5, "ne");
5659 less(0xC, "l");
5660 greater_equal(0xD, "ge");
5661 less_equal(0xE, "le");
5662 greater(0xF, "g");
5663 %}
5664 %}
5666 // Comparison Code, unsigned compare. Used by FP also, with
5667 // C2 (unordered) turned into GT or LT already. The other bits
5668 // C0 and C3 are turned into Carry & Zero flags.
5669 operand cmpOpU() %{
5670 match(Bool);
5672 format %{ "" %}
5673 interface(COND_INTER) %{
5674 equal(0x4, "e");
5675 not_equal(0x5, "ne");
5676 less(0x2, "b");
5677 greater_equal(0x3, "nb");
5678 less_equal(0x6, "be");
5679 greater(0x7, "nbe");
5680 %}
5681 %}
5683 // Floating comparisons that don't require any fixup for the unordered case
5684 operand cmpOpUCF() %{
5685 match(Bool);
5686 predicate(n->as_Bool()->_test._test == BoolTest::lt ||
5687 n->as_Bool()->_test._test == BoolTest::ge ||
5688 n->as_Bool()->_test._test == BoolTest::le ||
5689 n->as_Bool()->_test._test == BoolTest::gt);
5690 format %{ "" %}
5691 interface(COND_INTER) %{
5692 equal(0x4, "e");
5693 not_equal(0x5, "ne");
5694 less(0x2, "b");
5695 greater_equal(0x3, "nb");
5696 less_equal(0x6, "be");
5697 greater(0x7, "nbe");
5698 %}
5699 %}
5702 // Floating comparisons that can be fixed up with extra conditional jumps
5703 operand cmpOpUCF2() %{
5704 match(Bool);
5705 predicate(n->as_Bool()->_test._test == BoolTest::ne ||
5706 n->as_Bool()->_test._test == BoolTest::eq);
5707 format %{ "" %}
5708 interface(COND_INTER) %{
5709 equal(0x4, "e");
5710 not_equal(0x5, "ne");
5711 less(0x2, "b");
5712 greater_equal(0x3, "nb");
5713 less_equal(0x6, "be");
5714 greater(0x7, "nbe");
5715 %}
5716 %}
5718 // Comparison Code for FP conditional move
5719 operand cmpOp_fcmov() %{
5720 match(Bool);
5722 format %{ "" %}
5723 interface(COND_INTER) %{
5724 equal (0x0C8);
5725 not_equal (0x1C8);
5726 less (0x0C0);
5727 greater_equal(0x1C0);
5728 less_equal (0x0D0);
5729 greater (0x1D0);
5730 %}
5731 %}
5733 // Comparision Code used in long compares
5734 operand cmpOp_commute() %{
5735 match(Bool);
5737 format %{ "" %}
5738 interface(COND_INTER) %{
5739 equal(0x4, "e");
5740 not_equal(0x5, "ne");
5741 less(0xF, "g");
5742 greater_equal(0xE, "le");
5743 less_equal(0xD, "ge");
5744 greater(0xC, "l");
5745 %}
5746 %}
5748 //----------OPERAND CLASSES----------------------------------------------------
5749 // Operand Classes are groups of operands that are used as to simplify
5750 // instruction definitions by not requiring the AD writer to specify separate
5751 // instructions for every form of operand when the instruction accepts
5752 // multiple operand types with the same basic encoding and format. The classic
5753 // case of this is memory operands.
5755 opclass memory(direct, indirect, indOffset8, indOffset32, indOffset32X, indIndexOffset,
5756 indIndex, indIndexScale, indIndexScaleOffset);
5758 // Long memory operations are encoded in 2 instructions and a +4 offset.
5759 // This means some kind of offset is always required and you cannot use
5760 // an oop as the offset (done when working on static globals).
5761 opclass long_memory(direct, indirect, indOffset8, indOffset32, indIndexOffset,
5762 indIndex, indIndexScale, indIndexScaleOffset);
5765 //----------PIPELINE-----------------------------------------------------------
5766 // Rules which define the behavior of the target architectures pipeline.
5767 pipeline %{
5769 //----------ATTRIBUTES---------------------------------------------------------
5770 attributes %{
5771 variable_size_instructions; // Fixed size instructions
5772 max_instructions_per_bundle = 3; // Up to 3 instructions per bundle
5773 instruction_unit_size = 1; // An instruction is 1 bytes long
5774 instruction_fetch_unit_size = 16; // The processor fetches one line
5775 instruction_fetch_units = 1; // of 16 bytes
5777 // List of nop instructions
5778 nops( MachNop );
5779 %}
5781 //----------RESOURCES----------------------------------------------------------
5782 // Resources are the functional units available to the machine
5784 // Generic P2/P3 pipeline
5785 // 3 decoders, only D0 handles big operands; a "bundle" is the limit of
5786 // 3 instructions decoded per cycle.
5787 // 2 load/store ops per cycle, 1 branch, 1 FPU,
5788 // 2 ALU op, only ALU0 handles mul/div instructions.
5789 resources( D0, D1, D2, DECODE = D0 | D1 | D2,
5790 MS0, MS1, MEM = MS0 | MS1,
5791 BR, FPU,
5792 ALU0, ALU1, ALU = ALU0 | ALU1 );
5794 //----------PIPELINE DESCRIPTION-----------------------------------------------
5795 // Pipeline Description specifies the stages in the machine's pipeline
5797 // Generic P2/P3 pipeline
5798 pipe_desc(S0, S1, S2, S3, S4, S5);
5800 //----------PIPELINE CLASSES---------------------------------------------------
5801 // Pipeline Classes describe the stages in which input and output are
5802 // referenced by the hardware pipeline.
5804 // Naming convention: ialu or fpu
5805 // Then: _reg
5806 // Then: _reg if there is a 2nd register
5807 // Then: _long if it's a pair of instructions implementing a long
5808 // Then: _fat if it requires the big decoder
5809 // Or: _mem if it requires the big decoder and a memory unit.
5811 // Integer ALU reg operation
5812 pipe_class ialu_reg(eRegI dst) %{
5813 single_instruction;
5814 dst : S4(write);
5815 dst : S3(read);
5816 DECODE : S0; // any decoder
5817 ALU : S3; // any alu
5818 %}
5820 // Long ALU reg operation
5821 pipe_class ialu_reg_long(eRegL dst) %{
5822 instruction_count(2);
5823 dst : S4(write);
5824 dst : S3(read);
5825 DECODE : S0(2); // any 2 decoders
5826 ALU : S3(2); // both alus
5827 %}
5829 // Integer ALU reg operation using big decoder
5830 pipe_class ialu_reg_fat(eRegI dst) %{
5831 single_instruction;
5832 dst : S4(write);
5833 dst : S3(read);
5834 D0 : S0; // big decoder only
5835 ALU : S3; // any alu
5836 %}
5838 // Long ALU reg operation using big decoder
5839 pipe_class ialu_reg_long_fat(eRegL dst) %{
5840 instruction_count(2);
5841 dst : S4(write);
5842 dst : S3(read);
5843 D0 : S0(2); // big decoder only; twice
5844 ALU : S3(2); // any 2 alus
5845 %}
5847 // Integer ALU reg-reg operation
5848 pipe_class ialu_reg_reg(eRegI dst, eRegI src) %{
5849 single_instruction;
5850 dst : S4(write);
5851 src : S3(read);
5852 DECODE : S0; // any decoder
5853 ALU : S3; // any alu
5854 %}
5856 // Long ALU reg-reg operation
5857 pipe_class ialu_reg_reg_long(eRegL dst, eRegL src) %{
5858 instruction_count(2);
5859 dst : S4(write);
5860 src : S3(read);
5861 DECODE : S0(2); // any 2 decoders
5862 ALU : S3(2); // both alus
5863 %}
5865 // Integer ALU reg-reg operation
5866 pipe_class ialu_reg_reg_fat(eRegI dst, memory src) %{
5867 single_instruction;
5868 dst : S4(write);
5869 src : S3(read);
5870 D0 : S0; // big decoder only
5871 ALU : S3; // any alu
5872 %}
5874 // Long ALU reg-reg operation
5875 pipe_class ialu_reg_reg_long_fat(eRegL dst, eRegL src) %{
5876 instruction_count(2);
5877 dst : S4(write);
5878 src : S3(read);
5879 D0 : S0(2); // big decoder only; twice
5880 ALU : S3(2); // both alus
5881 %}
5883 // Integer ALU reg-mem operation
5884 pipe_class ialu_reg_mem(eRegI dst, memory mem) %{
5885 single_instruction;
5886 dst : S5(write);
5887 mem : S3(read);
5888 D0 : S0; // big decoder only
5889 ALU : S4; // any alu
5890 MEM : S3; // any mem
5891 %}
5893 // Long ALU reg-mem operation
5894 pipe_class ialu_reg_long_mem(eRegL dst, load_long_memory mem) %{
5895 instruction_count(2);
5896 dst : S5(write);
5897 mem : S3(read);
5898 D0 : S0(2); // big decoder only; twice
5899 ALU : S4(2); // any 2 alus
5900 MEM : S3(2); // both mems
5901 %}
5903 // Integer mem operation (prefetch)
5904 pipe_class ialu_mem(memory mem)
5905 %{
5906 single_instruction;
5907 mem : S3(read);
5908 D0 : S0; // big decoder only
5909 MEM : S3; // any mem
5910 %}
5912 // Integer Store to Memory
5913 pipe_class ialu_mem_reg(memory mem, eRegI src) %{
5914 single_instruction;
5915 mem : S3(read);
5916 src : S5(read);
5917 D0 : S0; // big decoder only
5918 ALU : S4; // any alu
5919 MEM : S3;
5920 %}
5922 // Long Store to Memory
5923 pipe_class ialu_mem_long_reg(memory mem, eRegL src) %{
5924 instruction_count(2);
5925 mem : S3(read);
5926 src : S5(read);
5927 D0 : S0(2); // big decoder only; twice
5928 ALU : S4(2); // any 2 alus
5929 MEM : S3(2); // Both mems
5930 %}
5932 // Integer Store to Memory
5933 pipe_class ialu_mem_imm(memory mem) %{
5934 single_instruction;
5935 mem : S3(read);
5936 D0 : S0; // big decoder only
5937 ALU : S4; // any alu
5938 MEM : S3;
5939 %}
5941 // Integer ALU0 reg-reg operation
5942 pipe_class ialu_reg_reg_alu0(eRegI dst, eRegI src) %{
5943 single_instruction;
5944 dst : S4(write);
5945 src : S3(read);
5946 D0 : S0; // Big decoder only
5947 ALU0 : S3; // only alu0
5948 %}
5950 // Integer ALU0 reg-mem operation
5951 pipe_class ialu_reg_mem_alu0(eRegI dst, memory mem) %{
5952 single_instruction;
5953 dst : S5(write);
5954 mem : S3(read);
5955 D0 : S0; // big decoder only
5956 ALU0 : S4; // ALU0 only
5957 MEM : S3; // any mem
5958 %}
5960 // Integer ALU reg-reg operation
5961 pipe_class ialu_cr_reg_reg(eFlagsReg cr, eRegI src1, eRegI src2) %{
5962 single_instruction;
5963 cr : S4(write);
5964 src1 : S3(read);
5965 src2 : S3(read);
5966 DECODE : S0; // any decoder
5967 ALU : S3; // any alu
5968 %}
5970 // Integer ALU reg-imm operation
5971 pipe_class ialu_cr_reg_imm(eFlagsReg cr, eRegI src1) %{
5972 single_instruction;
5973 cr : S4(write);
5974 src1 : S3(read);
5975 DECODE : S0; // any decoder
5976 ALU : S3; // any alu
5977 %}
5979 // Integer ALU reg-mem operation
5980 pipe_class ialu_cr_reg_mem(eFlagsReg cr, eRegI src1, memory src2) %{
5981 single_instruction;
5982 cr : S4(write);
5983 src1 : S3(read);
5984 src2 : S3(read);
5985 D0 : S0; // big decoder only
5986 ALU : S4; // any alu
5987 MEM : S3;
5988 %}
5990 // Conditional move reg-reg
5991 pipe_class pipe_cmplt( eRegI p, eRegI q, eRegI y ) %{
5992 instruction_count(4);
5993 y : S4(read);
5994 q : S3(read);
5995 p : S3(read);
5996 DECODE : S0(4); // any decoder
5997 %}
5999 // Conditional move reg-reg
6000 pipe_class pipe_cmov_reg( eRegI dst, eRegI src, eFlagsReg cr ) %{
6001 single_instruction;
6002 dst : S4(write);
6003 src : S3(read);
6004 cr : S3(read);
6005 DECODE : S0; // any decoder
6006 %}
6008 // Conditional move reg-mem
6009 pipe_class pipe_cmov_mem( eFlagsReg cr, eRegI dst, memory src) %{
6010 single_instruction;
6011 dst : S4(write);
6012 src : S3(read);
6013 cr : S3(read);
6014 DECODE : S0; // any decoder
6015 MEM : S3;
6016 %}
6018 // Conditional move reg-reg long
6019 pipe_class pipe_cmov_reg_long( eFlagsReg cr, eRegL dst, eRegL src) %{
6020 single_instruction;
6021 dst : S4(write);
6022 src : S3(read);
6023 cr : S3(read);
6024 DECODE : S0(2); // any 2 decoders
6025 %}
6027 // Conditional move double reg-reg
6028 pipe_class pipe_cmovD_reg( eFlagsReg cr, regDPR1 dst, regD src) %{
6029 single_instruction;
6030 dst : S4(write);
6031 src : S3(read);
6032 cr : S3(read);
6033 DECODE : S0; // any decoder
6034 %}
6036 // Float reg-reg operation
6037 pipe_class fpu_reg(regD dst) %{
6038 instruction_count(2);
6039 dst : S3(read);
6040 DECODE : S0(2); // any 2 decoders
6041 FPU : S3;
6042 %}
6044 // Float reg-reg operation
6045 pipe_class fpu_reg_reg(regD dst, regD src) %{
6046 instruction_count(2);
6047 dst : S4(write);
6048 src : S3(read);
6049 DECODE : S0(2); // any 2 decoders
6050 FPU : S3;
6051 %}
6053 // Float reg-reg operation
6054 pipe_class fpu_reg_reg_reg(regD dst, regD src1, regD src2) %{
6055 instruction_count(3);
6056 dst : S4(write);
6057 src1 : S3(read);
6058 src2 : S3(read);
6059 DECODE : S0(3); // any 3 decoders
6060 FPU : S3(2);
6061 %}
6063 // Float reg-reg operation
6064 pipe_class fpu_reg_reg_reg_reg(regD dst, regD src1, regD src2, regD src3) %{
6065 instruction_count(4);
6066 dst : S4(write);
6067 src1 : S3(read);
6068 src2 : S3(read);
6069 src3 : S3(read);
6070 DECODE : S0(4); // any 3 decoders
6071 FPU : S3(2);
6072 %}
6074 // Float reg-reg operation
6075 pipe_class fpu_reg_mem_reg_reg(regD dst, memory src1, regD src2, regD src3) %{
6076 instruction_count(4);
6077 dst : S4(write);
6078 src1 : S3(read);
6079 src2 : S3(read);
6080 src3 : S3(read);
6081 DECODE : S1(3); // any 3 decoders
6082 D0 : S0; // Big decoder only
6083 FPU : S3(2);
6084 MEM : S3;
6085 %}
6087 // Float reg-mem operation
6088 pipe_class fpu_reg_mem(regD dst, memory mem) %{
6089 instruction_count(2);
6090 dst : S5(write);
6091 mem : S3(read);
6092 D0 : S0; // big decoder only
6093 DECODE : S1; // any decoder for FPU POP
6094 FPU : S4;
6095 MEM : S3; // any mem
6096 %}
6098 // Float reg-mem operation
6099 pipe_class fpu_reg_reg_mem(regD dst, regD src1, memory mem) %{
6100 instruction_count(3);
6101 dst : S5(write);
6102 src1 : S3(read);
6103 mem : S3(read);
6104 D0 : S0; // big decoder only
6105 DECODE : S1(2); // any decoder for FPU POP
6106 FPU : S4;
6107 MEM : S3; // any mem
6108 %}
6110 // Float mem-reg operation
6111 pipe_class fpu_mem_reg(memory mem, regD src) %{
6112 instruction_count(2);
6113 src : S5(read);
6114 mem : S3(read);
6115 DECODE : S0; // any decoder for FPU PUSH
6116 D0 : S1; // big decoder only
6117 FPU : S4;
6118 MEM : S3; // any mem
6119 %}
6121 pipe_class fpu_mem_reg_reg(memory mem, regD src1, regD src2) %{
6122 instruction_count(3);
6123 src1 : S3(read);
6124 src2 : S3(read);
6125 mem : S3(read);
6126 DECODE : S0(2); // any decoder for FPU PUSH
6127 D0 : S1; // big decoder only
6128 FPU : S4;
6129 MEM : S3; // any mem
6130 %}
6132 pipe_class fpu_mem_reg_mem(memory mem, regD src1, memory src2) %{
6133 instruction_count(3);
6134 src1 : S3(read);
6135 src2 : S3(read);
6136 mem : S4(read);
6137 DECODE : S0; // any decoder for FPU PUSH
6138 D0 : S0(2); // big decoder only
6139 FPU : S4;
6140 MEM : S3(2); // any mem
6141 %}
6143 pipe_class fpu_mem_mem(memory dst, memory src1) %{
6144 instruction_count(2);
6145 src1 : S3(read);
6146 dst : S4(read);
6147 D0 : S0(2); // big decoder only
6148 MEM : S3(2); // any mem
6149 %}
6151 pipe_class fpu_mem_mem_mem(memory dst, memory src1, memory src2) %{
6152 instruction_count(3);
6153 src1 : S3(read);
6154 src2 : S3(read);
6155 dst : S4(read);
6156 D0 : S0(3); // big decoder only
6157 FPU : S4;
6158 MEM : S3(3); // any mem
6159 %}
6161 pipe_class fpu_mem_reg_con(memory mem, regD src1) %{
6162 instruction_count(3);
6163 src1 : S4(read);
6164 mem : S4(read);
6165 DECODE : S0; // any decoder for FPU PUSH
6166 D0 : S0(2); // big decoder only
6167 FPU : S4;
6168 MEM : S3(2); // any mem
6169 %}
6171 // Float load constant
6172 pipe_class fpu_reg_con(regD dst) %{
6173 instruction_count(2);
6174 dst : S5(write);
6175 D0 : S0; // big decoder only for the load
6176 DECODE : S1; // any decoder for FPU POP
6177 FPU : S4;
6178 MEM : S3; // any mem
6179 %}
6181 // Float load constant
6182 pipe_class fpu_reg_reg_con(regD dst, regD src) %{
6183 instruction_count(3);
6184 dst : S5(write);
6185 src : S3(read);
6186 D0 : S0; // big decoder only for the load
6187 DECODE : S1(2); // any decoder for FPU POP
6188 FPU : S4;
6189 MEM : S3; // any mem
6190 %}
6192 // UnConditional branch
6193 pipe_class pipe_jmp( label labl ) %{
6194 single_instruction;
6195 BR : S3;
6196 %}
6198 // Conditional branch
6199 pipe_class pipe_jcc( cmpOp cmp, eFlagsReg cr, label labl ) %{
6200 single_instruction;
6201 cr : S1(read);
6202 BR : S3;
6203 %}
6205 // Allocation idiom
6206 pipe_class pipe_cmpxchg( eRegP dst, eRegP heap_ptr ) %{
6207 instruction_count(1); force_serialization;
6208 fixed_latency(6);
6209 heap_ptr : S3(read);
6210 DECODE : S0(3);
6211 D0 : S2;
6212 MEM : S3;
6213 ALU : S3(2);
6214 dst : S5(write);
6215 BR : S5;
6216 %}
6218 // Generic big/slow expanded idiom
6219 pipe_class pipe_slow( ) %{
6220 instruction_count(10); multiple_bundles; force_serialization;
6221 fixed_latency(100);
6222 D0 : S0(2);
6223 MEM : S3(2);
6224 %}
6226 // The real do-nothing guy
6227 pipe_class empty( ) %{
6228 instruction_count(0);
6229 %}
6231 // Define the class for the Nop node
6232 define %{
6233 MachNop = empty;
6234 %}
6236 %}
6238 //----------INSTRUCTIONS-------------------------------------------------------
6239 //
6240 // match -- States which machine-independent subtree may be replaced
6241 // by this instruction.
6242 // ins_cost -- The estimated cost of this instruction is used by instruction
6243 // selection to identify a minimum cost tree of machine
6244 // instructions that matches a tree of machine-independent
6245 // instructions.
6246 // format -- A string providing the disassembly for this instruction.
6247 // The value of an instruction's operand may be inserted
6248 // by referring to it with a '$' prefix.
6249 // opcode -- Three instruction opcodes may be provided. These are referred
6250 // to within an encode class as $primary, $secondary, and $tertiary
6251 // respectively. The primary opcode is commonly used to
6252 // indicate the type of machine instruction, while secondary
6253 // and tertiary are often used for prefix options or addressing
6254 // modes.
6255 // ins_encode -- A list of encode classes with parameters. The encode class
6256 // name must have been defined in an 'enc_class' specification
6257 // in the encode section of the architecture description.
6259 //----------BSWAP-Instruction--------------------------------------------------
6260 instruct bytes_reverse_int(eRegI dst) %{
6261 match(Set dst (ReverseBytesI dst));
6263 format %{ "BSWAP $dst" %}
6264 opcode(0x0F, 0xC8);
6265 ins_encode( OpcP, OpcSReg(dst) );
6266 ins_pipe( ialu_reg );
6267 %}
6269 instruct bytes_reverse_long(eRegL dst) %{
6270 match(Set dst (ReverseBytesL dst));
6272 format %{ "BSWAP $dst.lo\n\t"
6273 "BSWAP $dst.hi\n\t"
6274 "XCHG $dst.lo $dst.hi" %}
6276 ins_cost(125);
6277 ins_encode( bswap_long_bytes(dst) );
6278 ins_pipe( ialu_reg_reg);
6279 %}
6281 instruct bytes_reverse_unsigned_short(eRegI dst) %{
6282 match(Set dst (ReverseBytesUS dst));
6284 format %{ "BSWAP $dst\n\t"
6285 "SHR $dst,16\n\t" %}
6286 ins_encode %{
6287 __ bswapl($dst$$Register);
6288 __ shrl($dst$$Register, 16);
6289 %}
6290 ins_pipe( ialu_reg );
6291 %}
6293 instruct bytes_reverse_short(eRegI dst) %{
6294 match(Set dst (ReverseBytesS dst));
6296 format %{ "BSWAP $dst\n\t"
6297 "SAR $dst,16\n\t" %}
6298 ins_encode %{
6299 __ bswapl($dst$$Register);
6300 __ sarl($dst$$Register, 16);
6301 %}
6302 ins_pipe( ialu_reg );
6303 %}
6306 //---------- Zeros Count Instructions ------------------------------------------
6308 instruct countLeadingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6309 predicate(UseCountLeadingZerosInstruction);
6310 match(Set dst (CountLeadingZerosI src));
6311 effect(KILL cr);
6313 format %{ "LZCNT $dst, $src\t# count leading zeros (int)" %}
6314 ins_encode %{
6315 __ lzcntl($dst$$Register, $src$$Register);
6316 %}
6317 ins_pipe(ialu_reg);
6318 %}
6320 instruct countLeadingZerosI_bsr(eRegI dst, eRegI src, eFlagsReg cr) %{
6321 predicate(!UseCountLeadingZerosInstruction);
6322 match(Set dst (CountLeadingZerosI src));
6323 effect(KILL cr);
6325 format %{ "BSR $dst, $src\t# count leading zeros (int)\n\t"
6326 "JNZ skip\n\t"
6327 "MOV $dst, -1\n"
6328 "skip:\n\t"
6329 "NEG $dst\n\t"
6330 "ADD $dst, 31" %}
6331 ins_encode %{
6332 Register Rdst = $dst$$Register;
6333 Register Rsrc = $src$$Register;
6334 Label skip;
6335 __ bsrl(Rdst, Rsrc);
6336 __ jccb(Assembler::notZero, skip);
6337 __ movl(Rdst, -1);
6338 __ bind(skip);
6339 __ negl(Rdst);
6340 __ addl(Rdst, BitsPerInt - 1);
6341 %}
6342 ins_pipe(ialu_reg);
6343 %}
6345 instruct countLeadingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6346 predicate(UseCountLeadingZerosInstruction);
6347 match(Set dst (CountLeadingZerosL src));
6348 effect(TEMP dst, KILL cr);
6350 format %{ "LZCNT $dst, $src.hi\t# count leading zeros (long)\n\t"
6351 "JNC done\n\t"
6352 "LZCNT $dst, $src.lo\n\t"
6353 "ADD $dst, 32\n"
6354 "done:" %}
6355 ins_encode %{
6356 Register Rdst = $dst$$Register;
6357 Register Rsrc = $src$$Register;
6358 Label done;
6359 __ lzcntl(Rdst, HIGH_FROM_LOW(Rsrc));
6360 __ jccb(Assembler::carryClear, done);
6361 __ lzcntl(Rdst, Rsrc);
6362 __ addl(Rdst, BitsPerInt);
6363 __ bind(done);
6364 %}
6365 ins_pipe(ialu_reg);
6366 %}
6368 instruct countLeadingZerosL_bsr(eRegI dst, eRegL src, eFlagsReg cr) %{
6369 predicate(!UseCountLeadingZerosInstruction);
6370 match(Set dst (CountLeadingZerosL src));
6371 effect(TEMP dst, KILL cr);
6373 format %{ "BSR $dst, $src.hi\t# count leading zeros (long)\n\t"
6374 "JZ msw_is_zero\n\t"
6375 "ADD $dst, 32\n\t"
6376 "JMP not_zero\n"
6377 "msw_is_zero:\n\t"
6378 "BSR $dst, $src.lo\n\t"
6379 "JNZ not_zero\n\t"
6380 "MOV $dst, -1\n"
6381 "not_zero:\n\t"
6382 "NEG $dst\n\t"
6383 "ADD $dst, 63\n" %}
6384 ins_encode %{
6385 Register Rdst = $dst$$Register;
6386 Register Rsrc = $src$$Register;
6387 Label msw_is_zero;
6388 Label not_zero;
6389 __ bsrl(Rdst, HIGH_FROM_LOW(Rsrc));
6390 __ jccb(Assembler::zero, msw_is_zero);
6391 __ addl(Rdst, BitsPerInt);
6392 __ jmpb(not_zero);
6393 __ bind(msw_is_zero);
6394 __ bsrl(Rdst, Rsrc);
6395 __ jccb(Assembler::notZero, not_zero);
6396 __ movl(Rdst, -1);
6397 __ bind(not_zero);
6398 __ negl(Rdst);
6399 __ addl(Rdst, BitsPerLong - 1);
6400 %}
6401 ins_pipe(ialu_reg);
6402 %}
6404 instruct countTrailingZerosI(eRegI dst, eRegI src, eFlagsReg cr) %{
6405 match(Set dst (CountTrailingZerosI src));
6406 effect(KILL cr);
6408 format %{ "BSF $dst, $src\t# count trailing zeros (int)\n\t"
6409 "JNZ done\n\t"
6410 "MOV $dst, 32\n"
6411 "done:" %}
6412 ins_encode %{
6413 Register Rdst = $dst$$Register;
6414 Label done;
6415 __ bsfl(Rdst, $src$$Register);
6416 __ jccb(Assembler::notZero, done);
6417 __ movl(Rdst, BitsPerInt);
6418 __ bind(done);
6419 %}
6420 ins_pipe(ialu_reg);
6421 %}
6423 instruct countTrailingZerosL(eRegI dst, eRegL src, eFlagsReg cr) %{
6424 match(Set dst (CountTrailingZerosL src));
6425 effect(TEMP dst, KILL cr);
6427 format %{ "BSF $dst, $src.lo\t# count trailing zeros (long)\n\t"
6428 "JNZ done\n\t"
6429 "BSF $dst, $src.hi\n\t"
6430 "JNZ msw_not_zero\n\t"
6431 "MOV $dst, 32\n"
6432 "msw_not_zero:\n\t"
6433 "ADD $dst, 32\n"
6434 "done:" %}
6435 ins_encode %{
6436 Register Rdst = $dst$$Register;
6437 Register Rsrc = $src$$Register;
6438 Label msw_not_zero;
6439 Label done;
6440 __ bsfl(Rdst, Rsrc);
6441 __ jccb(Assembler::notZero, done);
6442 __ bsfl(Rdst, HIGH_FROM_LOW(Rsrc));
6443 __ jccb(Assembler::notZero, msw_not_zero);
6444 __ movl(Rdst, BitsPerInt);
6445 __ bind(msw_not_zero);
6446 __ addl(Rdst, BitsPerInt);
6447 __ bind(done);
6448 %}
6449 ins_pipe(ialu_reg);
6450 %}
6453 //---------- Population Count Instructions -------------------------------------
6455 instruct popCountI(eRegI dst, eRegI src) %{
6456 predicate(UsePopCountInstruction);
6457 match(Set dst (PopCountI src));
6459 format %{ "POPCNT $dst, $src" %}
6460 ins_encode %{
6461 __ popcntl($dst$$Register, $src$$Register);
6462 %}
6463 ins_pipe(ialu_reg);
6464 %}
6466 instruct popCountI_mem(eRegI dst, memory mem) %{
6467 predicate(UsePopCountInstruction);
6468 match(Set dst (PopCountI (LoadI mem)));
6470 format %{ "POPCNT $dst, $mem" %}
6471 ins_encode %{
6472 __ popcntl($dst$$Register, $mem$$Address);
6473 %}
6474 ins_pipe(ialu_reg);
6475 %}
6477 // Note: Long.bitCount(long) returns an int.
6478 instruct popCountL(eRegI dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
6479 predicate(UsePopCountInstruction);
6480 match(Set dst (PopCountL src));
6481 effect(KILL cr, TEMP tmp, TEMP dst);
6483 format %{ "POPCNT $dst, $src.lo\n\t"
6484 "POPCNT $tmp, $src.hi\n\t"
6485 "ADD $dst, $tmp" %}
6486 ins_encode %{
6487 __ popcntl($dst$$Register, $src$$Register);
6488 __ popcntl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
6489 __ addl($dst$$Register, $tmp$$Register);
6490 %}
6491 ins_pipe(ialu_reg);
6492 %}
6494 // Note: Long.bitCount(long) returns an int.
6495 instruct popCountL_mem(eRegI dst, memory mem, eRegI tmp, eFlagsReg cr) %{
6496 predicate(UsePopCountInstruction);
6497 match(Set dst (PopCountL (LoadL mem)));
6498 effect(KILL cr, TEMP tmp, TEMP dst);
6500 format %{ "POPCNT $dst, $mem\n\t"
6501 "POPCNT $tmp, $mem+4\n\t"
6502 "ADD $dst, $tmp" %}
6503 ins_encode %{
6504 //__ popcntl($dst$$Register, $mem$$Address$$first);
6505 //__ popcntl($tmp$$Register, $mem$$Address$$second);
6506 __ popcntl($dst$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false));
6507 __ popcntl($tmp$$Register, Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false));
6508 __ addl($dst$$Register, $tmp$$Register);
6509 %}
6510 ins_pipe(ialu_reg);
6511 %}
6514 //----------Load/Store/Move Instructions---------------------------------------
6515 //----------Load Instructions--------------------------------------------------
6516 // Load Byte (8bit signed)
6517 instruct loadB(xRegI dst, memory mem) %{
6518 match(Set dst (LoadB mem));
6520 ins_cost(125);
6521 format %{ "MOVSX8 $dst,$mem\t# byte" %}
6523 ins_encode %{
6524 __ movsbl($dst$$Register, $mem$$Address);
6525 %}
6527 ins_pipe(ialu_reg_mem);
6528 %}
6530 // Load Byte (8bit signed) into Long Register
6531 instruct loadB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6532 match(Set dst (ConvI2L (LoadB mem)));
6533 effect(KILL cr);
6535 ins_cost(375);
6536 format %{ "MOVSX8 $dst.lo,$mem\t# byte -> long\n\t"
6537 "MOV $dst.hi,$dst.lo\n\t"
6538 "SAR $dst.hi,7" %}
6540 ins_encode %{
6541 __ movsbl($dst$$Register, $mem$$Address);
6542 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6543 __ sarl(HIGH_FROM_LOW($dst$$Register), 7); // 24+1 MSB are already signed extended.
6544 %}
6546 ins_pipe(ialu_reg_mem);
6547 %}
6549 // Load Unsigned Byte (8bit UNsigned)
6550 instruct loadUB(xRegI dst, memory mem) %{
6551 match(Set dst (LoadUB mem));
6553 ins_cost(125);
6554 format %{ "MOVZX8 $dst,$mem\t# ubyte -> int" %}
6556 ins_encode %{
6557 __ movzbl($dst$$Register, $mem$$Address);
6558 %}
6560 ins_pipe(ialu_reg_mem);
6561 %}
6563 // Load Unsigned Byte (8 bit UNsigned) into Long Register
6564 instruct loadUB2L(eRegL dst, memory mem, eFlagsReg cr) %{
6565 match(Set dst (ConvI2L (LoadUB mem)));
6566 effect(KILL cr);
6568 ins_cost(250);
6569 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte -> long\n\t"
6570 "XOR $dst.hi,$dst.hi" %}
6572 ins_encode %{
6573 Register Rdst = $dst$$Register;
6574 __ movzbl(Rdst, $mem$$Address);
6575 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6576 %}
6578 ins_pipe(ialu_reg_mem);
6579 %}
6581 // Load Unsigned Byte (8 bit UNsigned) with mask into Long Register
6582 instruct loadUB2L_immI8(eRegL dst, memory mem, immI8 mask, eFlagsReg cr) %{
6583 match(Set dst (ConvI2L (AndI (LoadUB mem) mask)));
6584 effect(KILL cr);
6586 format %{ "MOVZX8 $dst.lo,$mem\t# ubyte & 8-bit mask -> long\n\t"
6587 "XOR $dst.hi,$dst.hi\n\t"
6588 "AND $dst.lo,$mask" %}
6589 ins_encode %{
6590 Register Rdst = $dst$$Register;
6591 __ movzbl(Rdst, $mem$$Address);
6592 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6593 __ andl(Rdst, $mask$$constant);
6594 %}
6595 ins_pipe(ialu_reg_mem);
6596 %}
6598 // Load Short (16bit signed)
6599 instruct loadS(eRegI dst, memory mem) %{
6600 match(Set dst (LoadS mem));
6602 ins_cost(125);
6603 format %{ "MOVSX $dst,$mem\t# short" %}
6605 ins_encode %{
6606 __ movswl($dst$$Register, $mem$$Address);
6607 %}
6609 ins_pipe(ialu_reg_mem);
6610 %}
6612 // Load Short (16 bit signed) to Byte (8 bit signed)
6613 instruct loadS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6614 match(Set dst (RShiftI (LShiftI (LoadS mem) twentyfour) twentyfour));
6616 ins_cost(125);
6617 format %{ "MOVSX $dst, $mem\t# short -> byte" %}
6618 ins_encode %{
6619 __ movsbl($dst$$Register, $mem$$Address);
6620 %}
6621 ins_pipe(ialu_reg_mem);
6622 %}
6624 // Load Short (16bit signed) into Long Register
6625 instruct loadS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6626 match(Set dst (ConvI2L (LoadS mem)));
6627 effect(KILL cr);
6629 ins_cost(375);
6630 format %{ "MOVSX $dst.lo,$mem\t# short -> long\n\t"
6631 "MOV $dst.hi,$dst.lo\n\t"
6632 "SAR $dst.hi,15" %}
6634 ins_encode %{
6635 __ movswl($dst$$Register, $mem$$Address);
6636 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6637 __ sarl(HIGH_FROM_LOW($dst$$Register), 15); // 16+1 MSB are already signed extended.
6638 %}
6640 ins_pipe(ialu_reg_mem);
6641 %}
6643 // Load Unsigned Short/Char (16bit unsigned)
6644 instruct loadUS(eRegI dst, memory mem) %{
6645 match(Set dst (LoadUS mem));
6647 ins_cost(125);
6648 format %{ "MOVZX $dst,$mem\t# ushort/char -> int" %}
6650 ins_encode %{
6651 __ movzwl($dst$$Register, $mem$$Address);
6652 %}
6654 ins_pipe(ialu_reg_mem);
6655 %}
6657 // Load Unsigned Short/Char (16 bit UNsigned) to Byte (8 bit signed)
6658 instruct loadUS2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6659 match(Set dst (RShiftI (LShiftI (LoadUS mem) twentyfour) twentyfour));
6661 ins_cost(125);
6662 format %{ "MOVSX $dst, $mem\t# ushort -> byte" %}
6663 ins_encode %{
6664 __ movsbl($dst$$Register, $mem$$Address);
6665 %}
6666 ins_pipe(ialu_reg_mem);
6667 %}
6669 // Load Unsigned Short/Char (16 bit UNsigned) into Long Register
6670 instruct loadUS2L(eRegL dst, memory mem, eFlagsReg cr) %{
6671 match(Set dst (ConvI2L (LoadUS mem)));
6672 effect(KILL cr);
6674 ins_cost(250);
6675 format %{ "MOVZX $dst.lo,$mem\t# ushort/char -> long\n\t"
6676 "XOR $dst.hi,$dst.hi" %}
6678 ins_encode %{
6679 __ movzwl($dst$$Register, $mem$$Address);
6680 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6681 %}
6683 ins_pipe(ialu_reg_mem);
6684 %}
6686 // Load Unsigned Short/Char (16 bit UNsigned) with mask 0xFF into Long Register
6687 instruct loadUS2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6688 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6689 effect(KILL cr);
6691 format %{ "MOVZX8 $dst.lo,$mem\t# ushort/char & 0xFF -> long\n\t"
6692 "XOR $dst.hi,$dst.hi" %}
6693 ins_encode %{
6694 Register Rdst = $dst$$Register;
6695 __ movzbl(Rdst, $mem$$Address);
6696 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6697 %}
6698 ins_pipe(ialu_reg_mem);
6699 %}
6701 // Load Unsigned Short/Char (16 bit UNsigned) with a 16-bit mask into Long Register
6702 instruct loadUS2L_immI16(eRegL dst, memory mem, immI16 mask, eFlagsReg cr) %{
6703 match(Set dst (ConvI2L (AndI (LoadUS mem) mask)));
6704 effect(KILL cr);
6706 format %{ "MOVZX $dst.lo, $mem\t# ushort/char & 16-bit mask -> long\n\t"
6707 "XOR $dst.hi,$dst.hi\n\t"
6708 "AND $dst.lo,$mask" %}
6709 ins_encode %{
6710 Register Rdst = $dst$$Register;
6711 __ movzwl(Rdst, $mem$$Address);
6712 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6713 __ andl(Rdst, $mask$$constant);
6714 %}
6715 ins_pipe(ialu_reg_mem);
6716 %}
6718 // Load Integer
6719 instruct loadI(eRegI dst, memory mem) %{
6720 match(Set dst (LoadI mem));
6722 ins_cost(125);
6723 format %{ "MOV $dst,$mem\t# int" %}
6725 ins_encode %{
6726 __ movl($dst$$Register, $mem$$Address);
6727 %}
6729 ins_pipe(ialu_reg_mem);
6730 %}
6732 // Load Integer (32 bit signed) to Byte (8 bit signed)
6733 instruct loadI2B(eRegI dst, memory mem, immI_24 twentyfour) %{
6734 match(Set dst (RShiftI (LShiftI (LoadI mem) twentyfour) twentyfour));
6736 ins_cost(125);
6737 format %{ "MOVSX $dst, $mem\t# int -> byte" %}
6738 ins_encode %{
6739 __ movsbl($dst$$Register, $mem$$Address);
6740 %}
6741 ins_pipe(ialu_reg_mem);
6742 %}
6744 // Load Integer (32 bit signed) to Unsigned Byte (8 bit UNsigned)
6745 instruct loadI2UB(eRegI dst, memory mem, immI_255 mask) %{
6746 match(Set dst (AndI (LoadI mem) mask));
6748 ins_cost(125);
6749 format %{ "MOVZX $dst, $mem\t# int -> ubyte" %}
6750 ins_encode %{
6751 __ movzbl($dst$$Register, $mem$$Address);
6752 %}
6753 ins_pipe(ialu_reg_mem);
6754 %}
6756 // Load Integer (32 bit signed) to Short (16 bit signed)
6757 instruct loadI2S(eRegI dst, memory mem, immI_16 sixteen) %{
6758 match(Set dst (RShiftI (LShiftI (LoadI mem) sixteen) sixteen));
6760 ins_cost(125);
6761 format %{ "MOVSX $dst, $mem\t# int -> short" %}
6762 ins_encode %{
6763 __ movswl($dst$$Register, $mem$$Address);
6764 %}
6765 ins_pipe(ialu_reg_mem);
6766 %}
6768 // Load Integer (32 bit signed) to Unsigned Short/Char (16 bit UNsigned)
6769 instruct loadI2US(eRegI dst, memory mem, immI_65535 mask) %{
6770 match(Set dst (AndI (LoadI mem) mask));
6772 ins_cost(125);
6773 format %{ "MOVZX $dst, $mem\t# int -> ushort/char" %}
6774 ins_encode %{
6775 __ movzwl($dst$$Register, $mem$$Address);
6776 %}
6777 ins_pipe(ialu_reg_mem);
6778 %}
6780 // Load Integer into Long Register
6781 instruct loadI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6782 match(Set dst (ConvI2L (LoadI mem)));
6783 effect(KILL cr);
6785 ins_cost(375);
6786 format %{ "MOV $dst.lo,$mem\t# int -> long\n\t"
6787 "MOV $dst.hi,$dst.lo\n\t"
6788 "SAR $dst.hi,31" %}
6790 ins_encode %{
6791 __ movl($dst$$Register, $mem$$Address);
6792 __ movl(HIGH_FROM_LOW($dst$$Register), $dst$$Register); // This is always a different register.
6793 __ sarl(HIGH_FROM_LOW($dst$$Register), 31);
6794 %}
6796 ins_pipe(ialu_reg_mem);
6797 %}
6799 // Load Integer with mask 0xFF into Long Register
6800 instruct loadI2L_immI_255(eRegL dst, memory mem, immI_255 mask, eFlagsReg cr) %{
6801 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6802 effect(KILL cr);
6804 format %{ "MOVZX8 $dst.lo,$mem\t# int & 0xFF -> long\n\t"
6805 "XOR $dst.hi,$dst.hi" %}
6806 ins_encode %{
6807 Register Rdst = $dst$$Register;
6808 __ movzbl(Rdst, $mem$$Address);
6809 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6810 %}
6811 ins_pipe(ialu_reg_mem);
6812 %}
6814 // Load Integer with mask 0xFFFF into Long Register
6815 instruct loadI2L_immI_65535(eRegL dst, memory mem, immI_65535 mask, eFlagsReg cr) %{
6816 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6817 effect(KILL cr);
6819 format %{ "MOVZX $dst.lo,$mem\t# int & 0xFFFF -> long\n\t"
6820 "XOR $dst.hi,$dst.hi" %}
6821 ins_encode %{
6822 Register Rdst = $dst$$Register;
6823 __ movzwl(Rdst, $mem$$Address);
6824 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6825 %}
6826 ins_pipe(ialu_reg_mem);
6827 %}
6829 // Load Integer with 32-bit mask into Long Register
6830 instruct loadI2L_immI(eRegL dst, memory mem, immI mask, eFlagsReg cr) %{
6831 match(Set dst (ConvI2L (AndI (LoadI mem) mask)));
6832 effect(KILL cr);
6834 format %{ "MOV $dst.lo,$mem\t# int & 32-bit mask -> long\n\t"
6835 "XOR $dst.hi,$dst.hi\n\t"
6836 "AND $dst.lo,$mask" %}
6837 ins_encode %{
6838 Register Rdst = $dst$$Register;
6839 __ movl(Rdst, $mem$$Address);
6840 __ xorl(HIGH_FROM_LOW(Rdst), HIGH_FROM_LOW(Rdst));
6841 __ andl(Rdst, $mask$$constant);
6842 %}
6843 ins_pipe(ialu_reg_mem);
6844 %}
6846 // Load Unsigned Integer into Long Register
6847 instruct loadUI2L(eRegL dst, memory mem, eFlagsReg cr) %{
6848 match(Set dst (LoadUI2L mem));
6849 effect(KILL cr);
6851 ins_cost(250);
6852 format %{ "MOV $dst.lo,$mem\t# uint -> long\n\t"
6853 "XOR $dst.hi,$dst.hi" %}
6855 ins_encode %{
6856 __ movl($dst$$Register, $mem$$Address);
6857 __ xorl(HIGH_FROM_LOW($dst$$Register), HIGH_FROM_LOW($dst$$Register));
6858 %}
6860 ins_pipe(ialu_reg_mem);
6861 %}
6863 // Load Long. Cannot clobber address while loading, so restrict address
6864 // register to ESI
6865 instruct loadL(eRegL dst, load_long_memory mem) %{
6866 predicate(!((LoadLNode*)n)->require_atomic_access());
6867 match(Set dst (LoadL mem));
6869 ins_cost(250);
6870 format %{ "MOV $dst.lo,$mem\t# long\n\t"
6871 "MOV $dst.hi,$mem+4" %}
6873 ins_encode %{
6874 Address Amemlo = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp, false);
6875 Address Amemhi = Address::make_raw($mem$$base, $mem$$index, $mem$$scale, $mem$$disp + 4, false);
6876 __ movl($dst$$Register, Amemlo);
6877 __ movl(HIGH_FROM_LOW($dst$$Register), Amemhi);
6878 %}
6880 ins_pipe(ialu_reg_long_mem);
6881 %}
6883 // Volatile Load Long. Must be atomic, so do 64-bit FILD
6884 // then store it down to the stack and reload on the int
6885 // side.
6886 instruct loadL_volatile(stackSlotL dst, memory mem) %{
6887 predicate(UseSSE<=1 && ((LoadLNode*)n)->require_atomic_access());
6888 match(Set dst (LoadL mem));
6890 ins_cost(200);
6891 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
6892 "FISTp $dst" %}
6893 ins_encode(enc_loadL_volatile(mem,dst));
6894 ins_pipe( fpu_reg_mem );
6895 %}
6897 instruct loadLX_volatile(stackSlotL dst, memory mem, regXD tmp) %{
6898 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6899 match(Set dst (LoadL mem));
6900 effect(TEMP tmp);
6901 ins_cost(180);
6902 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6903 "MOVSD $dst,$tmp" %}
6904 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
6905 ins_pipe( pipe_slow );
6906 %}
6908 instruct loadLX_reg_volatile(eRegL dst, memory mem, regXD tmp) %{
6909 predicate(UseSSE>=2 && ((LoadLNode*)n)->require_atomic_access());
6910 match(Set dst (LoadL mem));
6911 effect(TEMP tmp);
6912 ins_cost(160);
6913 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
6914 "MOVD $dst.lo,$tmp\n\t"
6915 "PSRLQ $tmp,32\n\t"
6916 "MOVD $dst.hi,$tmp" %}
6917 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
6918 ins_pipe( pipe_slow );
6919 %}
6921 // Load Range
6922 instruct loadRange(eRegI dst, memory mem) %{
6923 match(Set dst (LoadRange mem));
6925 ins_cost(125);
6926 format %{ "MOV $dst,$mem" %}
6927 opcode(0x8B);
6928 ins_encode( OpcP, RegMem(dst,mem));
6929 ins_pipe( ialu_reg_mem );
6930 %}
6933 // Load Pointer
6934 instruct loadP(eRegP dst, memory mem) %{
6935 match(Set dst (LoadP mem));
6937 ins_cost(125);
6938 format %{ "MOV $dst,$mem" %}
6939 opcode(0x8B);
6940 ins_encode( OpcP, RegMem(dst,mem));
6941 ins_pipe( ialu_reg_mem );
6942 %}
6944 // Load Klass Pointer
6945 instruct loadKlass(eRegP dst, memory mem) %{
6946 match(Set dst (LoadKlass mem));
6948 ins_cost(125);
6949 format %{ "MOV $dst,$mem" %}
6950 opcode(0x8B);
6951 ins_encode( OpcP, RegMem(dst,mem));
6952 ins_pipe( ialu_reg_mem );
6953 %}
6955 // Load Double
6956 instruct loadD(regD dst, memory mem) %{
6957 predicate(UseSSE<=1);
6958 match(Set dst (LoadD mem));
6960 ins_cost(150);
6961 format %{ "FLD_D ST,$mem\n\t"
6962 "FSTP $dst" %}
6963 opcode(0xDD); /* DD /0 */
6964 ins_encode( OpcP, RMopc_Mem(0x00,mem),
6965 Pop_Reg_D(dst) );
6966 ins_pipe( fpu_reg_mem );
6967 %}
6969 // Load Double to XMM
6970 instruct loadXD(regXD dst, memory mem) %{
6971 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
6972 match(Set dst (LoadD mem));
6973 ins_cost(145);
6974 format %{ "MOVSD $dst,$mem" %}
6975 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
6976 ins_pipe( pipe_slow );
6977 %}
6979 instruct loadXD_partial(regXD dst, memory mem) %{
6980 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
6981 match(Set dst (LoadD mem));
6982 ins_cost(145);
6983 format %{ "MOVLPD $dst,$mem" %}
6984 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,mem));
6985 ins_pipe( pipe_slow );
6986 %}
6988 // Load to XMM register (single-precision floating point)
6989 // MOVSS instruction
6990 instruct loadX(regX dst, memory mem) %{
6991 predicate(UseSSE>=1);
6992 match(Set dst (LoadF mem));
6993 ins_cost(145);
6994 format %{ "MOVSS $dst,$mem" %}
6995 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,mem));
6996 ins_pipe( pipe_slow );
6997 %}
6999 // Load Float
7000 instruct loadF(regF dst, memory mem) %{
7001 predicate(UseSSE==0);
7002 match(Set dst (LoadF mem));
7004 ins_cost(150);
7005 format %{ "FLD_S ST,$mem\n\t"
7006 "FSTP $dst" %}
7007 opcode(0xD9); /* D9 /0 */
7008 ins_encode( OpcP, RMopc_Mem(0x00,mem),
7009 Pop_Reg_F(dst) );
7010 ins_pipe( fpu_reg_mem );
7011 %}
7013 // Load Aligned Packed Byte to XMM register
7014 instruct loadA8B(regXD dst, memory mem) %{
7015 predicate(UseSSE>=1);
7016 match(Set dst (Load8B mem));
7017 ins_cost(125);
7018 format %{ "MOVQ $dst,$mem\t! packed8B" %}
7019 ins_encode( movq_ld(dst, mem));
7020 ins_pipe( pipe_slow );
7021 %}
7023 // Load Aligned Packed Short to XMM register
7024 instruct loadA4S(regXD dst, memory mem) %{
7025 predicate(UseSSE>=1);
7026 match(Set dst (Load4S mem));
7027 ins_cost(125);
7028 format %{ "MOVQ $dst,$mem\t! packed4S" %}
7029 ins_encode( movq_ld(dst, mem));
7030 ins_pipe( pipe_slow );
7031 %}
7033 // Load Aligned Packed Char to XMM register
7034 instruct loadA4C(regXD dst, memory mem) %{
7035 predicate(UseSSE>=1);
7036 match(Set dst (Load4C mem));
7037 ins_cost(125);
7038 format %{ "MOVQ $dst,$mem\t! packed4C" %}
7039 ins_encode( movq_ld(dst, mem));
7040 ins_pipe( pipe_slow );
7041 %}
7043 // Load Aligned Packed Integer to XMM register
7044 instruct load2IU(regXD dst, memory mem) %{
7045 predicate(UseSSE>=1);
7046 match(Set dst (Load2I mem));
7047 ins_cost(125);
7048 format %{ "MOVQ $dst,$mem\t! packed2I" %}
7049 ins_encode( movq_ld(dst, mem));
7050 ins_pipe( pipe_slow );
7051 %}
7053 // Load Aligned Packed Single to XMM
7054 instruct loadA2F(regXD dst, memory mem) %{
7055 predicate(UseSSE>=1);
7056 match(Set dst (Load2F mem));
7057 ins_cost(145);
7058 format %{ "MOVQ $dst,$mem\t! packed2F" %}
7059 ins_encode( movq_ld(dst, mem));
7060 ins_pipe( pipe_slow );
7061 %}
7063 // Load Effective Address
7064 instruct leaP8(eRegP dst, indOffset8 mem) %{
7065 match(Set dst mem);
7067 ins_cost(110);
7068 format %{ "LEA $dst,$mem" %}
7069 opcode(0x8D);
7070 ins_encode( OpcP, RegMem(dst,mem));
7071 ins_pipe( ialu_reg_reg_fat );
7072 %}
7074 instruct leaP32(eRegP dst, indOffset32 mem) %{
7075 match(Set dst mem);
7077 ins_cost(110);
7078 format %{ "LEA $dst,$mem" %}
7079 opcode(0x8D);
7080 ins_encode( OpcP, RegMem(dst,mem));
7081 ins_pipe( ialu_reg_reg_fat );
7082 %}
7084 instruct leaPIdxOff(eRegP dst, indIndexOffset mem) %{
7085 match(Set dst mem);
7087 ins_cost(110);
7088 format %{ "LEA $dst,$mem" %}
7089 opcode(0x8D);
7090 ins_encode( OpcP, RegMem(dst,mem));
7091 ins_pipe( ialu_reg_reg_fat );
7092 %}
7094 instruct leaPIdxScale(eRegP dst, indIndexScale mem) %{
7095 match(Set dst mem);
7097 ins_cost(110);
7098 format %{ "LEA $dst,$mem" %}
7099 opcode(0x8D);
7100 ins_encode( OpcP, RegMem(dst,mem));
7101 ins_pipe( ialu_reg_reg_fat );
7102 %}
7104 instruct leaPIdxScaleOff(eRegP dst, indIndexScaleOffset mem) %{
7105 match(Set dst mem);
7107 ins_cost(110);
7108 format %{ "LEA $dst,$mem" %}
7109 opcode(0x8D);
7110 ins_encode( OpcP, RegMem(dst,mem));
7111 ins_pipe( ialu_reg_reg_fat );
7112 %}
7114 // Load Constant
7115 instruct loadConI(eRegI dst, immI src) %{
7116 match(Set dst src);
7118 format %{ "MOV $dst,$src" %}
7119 ins_encode( LdImmI(dst, src) );
7120 ins_pipe( ialu_reg_fat );
7121 %}
7123 // Load Constant zero
7124 instruct loadConI0(eRegI dst, immI0 src, eFlagsReg cr) %{
7125 match(Set dst src);
7126 effect(KILL cr);
7128 ins_cost(50);
7129 format %{ "XOR $dst,$dst" %}
7130 opcode(0x33); /* + rd */
7131 ins_encode( OpcP, RegReg( dst, dst ) );
7132 ins_pipe( ialu_reg );
7133 %}
7135 instruct loadConP(eRegP dst, immP src) %{
7136 match(Set dst src);
7138 format %{ "MOV $dst,$src" %}
7139 opcode(0xB8); /* + rd */
7140 ins_encode( LdImmP(dst, src) );
7141 ins_pipe( ialu_reg_fat );
7142 %}
7144 instruct loadConL(eRegL dst, immL src, eFlagsReg cr) %{
7145 match(Set dst src);
7146 effect(KILL cr);
7147 ins_cost(200);
7148 format %{ "MOV $dst.lo,$src.lo\n\t"
7149 "MOV $dst.hi,$src.hi" %}
7150 opcode(0xB8);
7151 ins_encode( LdImmL_Lo(dst, src), LdImmL_Hi(dst, src) );
7152 ins_pipe( ialu_reg_long_fat );
7153 %}
7155 instruct loadConL0(eRegL dst, immL0 src, eFlagsReg cr) %{
7156 match(Set dst src);
7157 effect(KILL cr);
7158 ins_cost(150);
7159 format %{ "XOR $dst.lo,$dst.lo\n\t"
7160 "XOR $dst.hi,$dst.hi" %}
7161 opcode(0x33,0x33);
7162 ins_encode( RegReg_Lo(dst,dst), RegReg_Hi(dst, dst) );
7163 ins_pipe( ialu_reg_long );
7164 %}
7166 // The instruction usage is guarded by predicate in operand immF().
7167 instruct loadConF(regF dst, immF src) %{
7168 match(Set dst src);
7169 ins_cost(125);
7171 format %{ "FLD_S ST,$src\n\t"
7172 "FSTP $dst" %}
7173 opcode(0xD9, 0x00); /* D9 /0 */
7174 ins_encode(LdImmF(src), Pop_Reg_F(dst) );
7175 ins_pipe( fpu_reg_con );
7176 %}
7178 // The instruction usage is guarded by predicate in operand immXF().
7179 instruct loadConX(regX dst, immXF con) %{
7180 match(Set dst con);
7181 ins_cost(125);
7182 format %{ "MOVSS $dst,[$con]" %}
7183 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), LdImmX(dst, con));
7184 ins_pipe( pipe_slow );
7185 %}
7187 // The instruction usage is guarded by predicate in operand immXF0().
7188 instruct loadConX0(regX dst, immXF0 src) %{
7189 match(Set dst src);
7190 ins_cost(100);
7191 format %{ "XORPS $dst,$dst\t# float 0.0" %}
7192 ins_encode( Opcode(0x0F), Opcode(0x57), RegReg(dst,dst));
7193 ins_pipe( pipe_slow );
7194 %}
7196 // The instruction usage is guarded by predicate in operand immD().
7197 instruct loadConD(regD dst, immD src) %{
7198 match(Set dst src);
7199 ins_cost(125);
7201 format %{ "FLD_D ST,$src\n\t"
7202 "FSTP $dst" %}
7203 ins_encode(LdImmD(src), Pop_Reg_D(dst) );
7204 ins_pipe( fpu_reg_con );
7205 %}
7207 // The instruction usage is guarded by predicate in operand immXD().
7208 instruct loadConXD(regXD dst, immXD con) %{
7209 match(Set dst con);
7210 ins_cost(125);
7211 format %{ "MOVSD $dst,[$con]" %}
7212 ins_encode(load_conXD(dst, con));
7213 ins_pipe( pipe_slow );
7214 %}
7216 // The instruction usage is guarded by predicate in operand immXD0().
7217 instruct loadConXD0(regXD dst, immXD0 src) %{
7218 match(Set dst src);
7219 ins_cost(100);
7220 format %{ "XORPD $dst,$dst\t# double 0.0" %}
7221 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x57), RegReg(dst,dst));
7222 ins_pipe( pipe_slow );
7223 %}
7225 // Load Stack Slot
7226 instruct loadSSI(eRegI dst, stackSlotI src) %{
7227 match(Set dst src);
7228 ins_cost(125);
7230 format %{ "MOV $dst,$src" %}
7231 opcode(0x8B);
7232 ins_encode( OpcP, RegMem(dst,src));
7233 ins_pipe( ialu_reg_mem );
7234 %}
7236 instruct loadSSL(eRegL dst, stackSlotL src) %{
7237 match(Set dst src);
7239 ins_cost(200);
7240 format %{ "MOV $dst,$src.lo\n\t"
7241 "MOV $dst+4,$src.hi" %}
7242 opcode(0x8B, 0x8B);
7243 ins_encode( OpcP, RegMem( dst, src ), OpcS, RegMem_Hi( dst, src ) );
7244 ins_pipe( ialu_mem_long_reg );
7245 %}
7247 // Load Stack Slot
7248 instruct loadSSP(eRegP dst, stackSlotP src) %{
7249 match(Set dst src);
7250 ins_cost(125);
7252 format %{ "MOV $dst,$src" %}
7253 opcode(0x8B);
7254 ins_encode( OpcP, RegMem(dst,src));
7255 ins_pipe( ialu_reg_mem );
7256 %}
7258 // Load Stack Slot
7259 instruct loadSSF(regF dst, stackSlotF src) %{
7260 match(Set dst src);
7261 ins_cost(125);
7263 format %{ "FLD_S $src\n\t"
7264 "FSTP $dst" %}
7265 opcode(0xD9); /* D9 /0, FLD m32real */
7266 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7267 Pop_Reg_F(dst) );
7268 ins_pipe( fpu_reg_mem );
7269 %}
7271 // Load Stack Slot
7272 instruct loadSSD(regD dst, stackSlotD src) %{
7273 match(Set dst src);
7274 ins_cost(125);
7276 format %{ "FLD_D $src\n\t"
7277 "FSTP $dst" %}
7278 opcode(0xDD); /* DD /0, FLD m64real */
7279 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
7280 Pop_Reg_D(dst) );
7281 ins_pipe( fpu_reg_mem );
7282 %}
7284 // Prefetch instructions.
7285 // Must be safe to execute with invalid address (cannot fault).
7287 instruct prefetchr0( memory mem ) %{
7288 predicate(UseSSE==0 && !VM_Version::supports_3dnow());
7289 match(PrefetchRead mem);
7290 ins_cost(0);
7291 size(0);
7292 format %{ "PREFETCHR (non-SSE is empty encoding)" %}
7293 ins_encode();
7294 ins_pipe(empty);
7295 %}
7297 instruct prefetchr( memory mem ) %{
7298 predicate(UseSSE==0 && VM_Version::supports_3dnow() || ReadPrefetchInstr==3);
7299 match(PrefetchRead mem);
7300 ins_cost(100);
7302 format %{ "PREFETCHR $mem\t! Prefetch into level 1 cache for read" %}
7303 opcode(0x0F, 0x0d); /* Opcode 0F 0d /0 */
7304 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7305 ins_pipe(ialu_mem);
7306 %}
7308 instruct prefetchrNTA( memory mem ) %{
7309 predicate(UseSSE>=1 && ReadPrefetchInstr==0);
7310 match(PrefetchRead mem);
7311 ins_cost(100);
7313 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for read" %}
7314 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7315 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7316 ins_pipe(ialu_mem);
7317 %}
7319 instruct prefetchrT0( memory mem ) %{
7320 predicate(UseSSE>=1 && ReadPrefetchInstr==1);
7321 match(PrefetchRead mem);
7322 ins_cost(100);
7324 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for read" %}
7325 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7326 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7327 ins_pipe(ialu_mem);
7328 %}
7330 instruct prefetchrT2( memory mem ) %{
7331 predicate(UseSSE>=1 && ReadPrefetchInstr==2);
7332 match(PrefetchRead mem);
7333 ins_cost(100);
7335 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for read" %}
7336 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7337 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7338 ins_pipe(ialu_mem);
7339 %}
7341 instruct prefetchw0( memory mem ) %{
7342 predicate(UseSSE==0 && !VM_Version::supports_3dnow());
7343 match(PrefetchWrite mem);
7344 ins_cost(0);
7345 size(0);
7346 format %{ "Prefetch (non-SSE is empty encoding)" %}
7347 ins_encode();
7348 ins_pipe(empty);
7349 %}
7351 instruct prefetchw( memory mem ) %{
7352 predicate(UseSSE==0 && VM_Version::supports_3dnow() || AllocatePrefetchInstr==3);
7353 match( PrefetchWrite mem );
7354 ins_cost(100);
7356 format %{ "PREFETCHW $mem\t! Prefetch into L1 cache and mark modified" %}
7357 opcode(0x0F, 0x0D); /* Opcode 0F 0D /1 */
7358 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7359 ins_pipe(ialu_mem);
7360 %}
7362 instruct prefetchwNTA( memory mem ) %{
7363 predicate(UseSSE>=1 && AllocatePrefetchInstr==0);
7364 match(PrefetchWrite mem);
7365 ins_cost(100);
7367 format %{ "PREFETCHNTA $mem\t! Prefetch into non-temporal cache for write" %}
7368 opcode(0x0F, 0x18); /* Opcode 0F 18 /0 */
7369 ins_encode(OpcP, OpcS, RMopc_Mem(0x00,mem));
7370 ins_pipe(ialu_mem);
7371 %}
7373 instruct prefetchwT0( memory mem ) %{
7374 predicate(UseSSE>=1 && AllocatePrefetchInstr==1);
7375 match(PrefetchWrite mem);
7376 ins_cost(100);
7378 format %{ "PREFETCHT0 $mem\t! Prefetch into L1 and L2 caches for write" %}
7379 opcode(0x0F, 0x18); /* Opcode 0F 18 /1 */
7380 ins_encode(OpcP, OpcS, RMopc_Mem(0x01,mem));
7381 ins_pipe(ialu_mem);
7382 %}
7384 instruct prefetchwT2( memory mem ) %{
7385 predicate(UseSSE>=1 && AllocatePrefetchInstr==2);
7386 match(PrefetchWrite mem);
7387 ins_cost(100);
7389 format %{ "PREFETCHT2 $mem\t! Prefetch into L2 cache for write" %}
7390 opcode(0x0F, 0x18); /* Opcode 0F 18 /3 */
7391 ins_encode(OpcP, OpcS, RMopc_Mem(0x03,mem));
7392 ins_pipe(ialu_mem);
7393 %}
7395 //----------Store Instructions-------------------------------------------------
7397 // Store Byte
7398 instruct storeB(memory mem, xRegI src) %{
7399 match(Set mem (StoreB mem src));
7401 ins_cost(125);
7402 format %{ "MOV8 $mem,$src" %}
7403 opcode(0x88);
7404 ins_encode( OpcP, RegMem( src, mem ) );
7405 ins_pipe( ialu_mem_reg );
7406 %}
7408 // Store Char/Short
7409 instruct storeC(memory mem, eRegI src) %{
7410 match(Set mem (StoreC mem src));
7412 ins_cost(125);
7413 format %{ "MOV16 $mem,$src" %}
7414 opcode(0x89, 0x66);
7415 ins_encode( OpcS, OpcP, RegMem( src, mem ) );
7416 ins_pipe( ialu_mem_reg );
7417 %}
7419 // Store Integer
7420 instruct storeI(memory mem, eRegI src) %{
7421 match(Set mem (StoreI mem src));
7423 ins_cost(125);
7424 format %{ "MOV $mem,$src" %}
7425 opcode(0x89);
7426 ins_encode( OpcP, RegMem( src, mem ) );
7427 ins_pipe( ialu_mem_reg );
7428 %}
7430 // Store Long
7431 instruct storeL(long_memory mem, eRegL src) %{
7432 predicate(!((StoreLNode*)n)->require_atomic_access());
7433 match(Set mem (StoreL mem src));
7435 ins_cost(200);
7436 format %{ "MOV $mem,$src.lo\n\t"
7437 "MOV $mem+4,$src.hi" %}
7438 opcode(0x89, 0x89);
7439 ins_encode( OpcP, RegMem( src, mem ), OpcS, RegMem_Hi( src, mem ) );
7440 ins_pipe( ialu_mem_long_reg );
7441 %}
7443 // Store Long to Integer
7444 instruct storeL2I(memory mem, eRegL src) %{
7445 match(Set mem (StoreI mem (ConvL2I src)));
7447 format %{ "MOV $mem,$src.lo\t# long -> int" %}
7448 ins_encode %{
7449 __ movl($mem$$Address, $src$$Register);
7450 %}
7451 ins_pipe(ialu_mem_reg);
7452 %}
7454 // Volatile Store Long. Must be atomic, so move it into
7455 // the FP TOS and then do a 64-bit FIST. Has to probe the
7456 // target address before the store (for null-ptr checks)
7457 // so the memory operand is used twice in the encoding.
7458 instruct storeL_volatile(memory mem, stackSlotL src, eFlagsReg cr ) %{
7459 predicate(UseSSE<=1 && ((StoreLNode*)n)->require_atomic_access());
7460 match(Set mem (StoreL mem src));
7461 effect( KILL cr );
7462 ins_cost(400);
7463 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7464 "FILD $src\n\t"
7465 "FISTp $mem\t # 64-bit atomic volatile long store" %}
7466 opcode(0x3B);
7467 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeL_volatile(mem,src));
7468 ins_pipe( fpu_reg_mem );
7469 %}
7471 instruct storeLX_volatile(memory mem, stackSlotL src, regXD tmp, eFlagsReg cr) %{
7472 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7473 match(Set mem (StoreL mem src));
7474 effect( TEMP tmp, KILL cr );
7475 ins_cost(380);
7476 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7477 "MOVSD $tmp,$src\n\t"
7478 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7479 opcode(0x3B);
7480 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_volatile(mem, src, tmp));
7481 ins_pipe( pipe_slow );
7482 %}
7484 instruct storeLX_reg_volatile(memory mem, eRegL src, regXD tmp2, regXD tmp, eFlagsReg cr) %{
7485 predicate(UseSSE>=2 && ((StoreLNode*)n)->require_atomic_access());
7486 match(Set mem (StoreL mem src));
7487 effect( TEMP tmp2 , TEMP tmp, KILL cr );
7488 ins_cost(360);
7489 format %{ "CMP $mem,EAX\t# Probe address for implicit null check\n\t"
7490 "MOVD $tmp,$src.lo\n\t"
7491 "MOVD $tmp2,$src.hi\n\t"
7492 "PUNPCKLDQ $tmp,$tmp2\n\t"
7493 "MOVSD $mem,$tmp\t # 64-bit atomic volatile long store" %}
7494 opcode(0x3B);
7495 ins_encode( OpcP, RegMem( EAX, mem ), enc_storeLX_reg_volatile(mem, src, tmp, tmp2));
7496 ins_pipe( pipe_slow );
7497 %}
7499 // Store Pointer; for storing unknown oops and raw pointers
7500 instruct storeP(memory mem, anyRegP src) %{
7501 match(Set mem (StoreP mem src));
7503 ins_cost(125);
7504 format %{ "MOV $mem,$src" %}
7505 opcode(0x89);
7506 ins_encode( OpcP, RegMem( src, mem ) );
7507 ins_pipe( ialu_mem_reg );
7508 %}
7510 // Store Integer Immediate
7511 instruct storeImmI(memory mem, immI src) %{
7512 match(Set mem (StoreI mem src));
7514 ins_cost(150);
7515 format %{ "MOV $mem,$src" %}
7516 opcode(0xC7); /* C7 /0 */
7517 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7518 ins_pipe( ialu_mem_imm );
7519 %}
7521 // Store Short/Char Immediate
7522 instruct storeImmI16(memory mem, immI16 src) %{
7523 predicate(UseStoreImmI16);
7524 match(Set mem (StoreC mem src));
7526 ins_cost(150);
7527 format %{ "MOV16 $mem,$src" %}
7528 opcode(0xC7); /* C7 /0 Same as 32 store immediate with prefix */
7529 ins_encode( SizePrefix, OpcP, RMopc_Mem(0x00,mem), Con16( src ));
7530 ins_pipe( ialu_mem_imm );
7531 %}
7533 // Store Pointer Immediate; null pointers or constant oops that do not
7534 // need card-mark barriers.
7535 instruct storeImmP(memory mem, immP src) %{
7536 match(Set mem (StoreP mem src));
7538 ins_cost(150);
7539 format %{ "MOV $mem,$src" %}
7540 opcode(0xC7); /* C7 /0 */
7541 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32( src ));
7542 ins_pipe( ialu_mem_imm );
7543 %}
7545 // Store Byte Immediate
7546 instruct storeImmB(memory mem, immI8 src) %{
7547 match(Set mem (StoreB mem src));
7549 ins_cost(150);
7550 format %{ "MOV8 $mem,$src" %}
7551 opcode(0xC6); /* C6 /0 */
7552 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7553 ins_pipe( ialu_mem_imm );
7554 %}
7556 // Store Aligned Packed Byte XMM register to memory
7557 instruct storeA8B(memory mem, regXD src) %{
7558 predicate(UseSSE>=1);
7559 match(Set mem (Store8B mem src));
7560 ins_cost(145);
7561 format %{ "MOVQ $mem,$src\t! packed8B" %}
7562 ins_encode( movq_st(mem, src));
7563 ins_pipe( pipe_slow );
7564 %}
7566 // Store Aligned Packed Char/Short XMM register to memory
7567 instruct storeA4C(memory mem, regXD src) %{
7568 predicate(UseSSE>=1);
7569 match(Set mem (Store4C mem src));
7570 ins_cost(145);
7571 format %{ "MOVQ $mem,$src\t! packed4C" %}
7572 ins_encode( movq_st(mem, src));
7573 ins_pipe( pipe_slow );
7574 %}
7576 // Store Aligned Packed Integer XMM register to memory
7577 instruct storeA2I(memory mem, regXD src) %{
7578 predicate(UseSSE>=1);
7579 match(Set mem (Store2I mem src));
7580 ins_cost(145);
7581 format %{ "MOVQ $mem,$src\t! packed2I" %}
7582 ins_encode( movq_st(mem, src));
7583 ins_pipe( pipe_slow );
7584 %}
7586 // Store CMS card-mark Immediate
7587 instruct storeImmCM(memory mem, immI8 src) %{
7588 match(Set mem (StoreCM mem src));
7590 ins_cost(150);
7591 format %{ "MOV8 $mem,$src\t! CMS card-mark imm0" %}
7592 opcode(0xC6); /* C6 /0 */
7593 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con8or32( src ));
7594 ins_pipe( ialu_mem_imm );
7595 %}
7597 // Store Double
7598 instruct storeD( memory mem, regDPR1 src) %{
7599 predicate(UseSSE<=1);
7600 match(Set mem (StoreD mem src));
7602 ins_cost(100);
7603 format %{ "FST_D $mem,$src" %}
7604 opcode(0xDD); /* DD /2 */
7605 ins_encode( enc_FP_store(mem,src) );
7606 ins_pipe( fpu_mem_reg );
7607 %}
7609 // Store double does rounding on x86
7610 instruct storeD_rounded( memory mem, regDPR1 src) %{
7611 predicate(UseSSE<=1);
7612 match(Set mem (StoreD mem (RoundDouble src)));
7614 ins_cost(100);
7615 format %{ "FST_D $mem,$src\t# round" %}
7616 opcode(0xDD); /* DD /2 */
7617 ins_encode( enc_FP_store(mem,src) );
7618 ins_pipe( fpu_mem_reg );
7619 %}
7621 // Store XMM register to memory (double-precision floating points)
7622 // MOVSD instruction
7623 instruct storeXD(memory mem, regXD src) %{
7624 predicate(UseSSE>=2);
7625 match(Set mem (StoreD mem src));
7626 ins_cost(95);
7627 format %{ "MOVSD $mem,$src" %}
7628 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7629 ins_pipe( pipe_slow );
7630 %}
7632 // Store XMM register to memory (single-precision floating point)
7633 // MOVSS instruction
7634 instruct storeX(memory mem, regX src) %{
7635 predicate(UseSSE>=1);
7636 match(Set mem (StoreF mem src));
7637 ins_cost(95);
7638 format %{ "MOVSS $mem,$src" %}
7639 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, mem));
7640 ins_pipe( pipe_slow );
7641 %}
7643 // Store Aligned Packed Single Float XMM register to memory
7644 instruct storeA2F(memory mem, regXD src) %{
7645 predicate(UseSSE>=1);
7646 match(Set mem (Store2F mem src));
7647 ins_cost(145);
7648 format %{ "MOVQ $mem,$src\t! packed2F" %}
7649 ins_encode( movq_st(mem, src));
7650 ins_pipe( pipe_slow );
7651 %}
7653 // Store Float
7654 instruct storeF( memory mem, regFPR1 src) %{
7655 predicate(UseSSE==0);
7656 match(Set mem (StoreF mem src));
7658 ins_cost(100);
7659 format %{ "FST_S $mem,$src" %}
7660 opcode(0xD9); /* D9 /2 */
7661 ins_encode( enc_FP_store(mem,src) );
7662 ins_pipe( fpu_mem_reg );
7663 %}
7665 // Store Float does rounding on x86
7666 instruct storeF_rounded( memory mem, regFPR1 src) %{
7667 predicate(UseSSE==0);
7668 match(Set mem (StoreF mem (RoundFloat src)));
7670 ins_cost(100);
7671 format %{ "FST_S $mem,$src\t# round" %}
7672 opcode(0xD9); /* D9 /2 */
7673 ins_encode( enc_FP_store(mem,src) );
7674 ins_pipe( fpu_mem_reg );
7675 %}
7677 // Store Float does rounding on x86
7678 instruct storeF_Drounded( memory mem, regDPR1 src) %{
7679 predicate(UseSSE<=1);
7680 match(Set mem (StoreF mem (ConvD2F src)));
7682 ins_cost(100);
7683 format %{ "FST_S $mem,$src\t# D-round" %}
7684 opcode(0xD9); /* D9 /2 */
7685 ins_encode( enc_FP_store(mem,src) );
7686 ins_pipe( fpu_mem_reg );
7687 %}
7689 // Store immediate Float value (it is faster than store from FPU register)
7690 // The instruction usage is guarded by predicate in operand immF().
7691 instruct storeF_imm( memory mem, immF src) %{
7692 match(Set mem (StoreF mem src));
7694 ins_cost(50);
7695 format %{ "MOV $mem,$src\t# store float" %}
7696 opcode(0xC7); /* C7 /0 */
7697 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32F_as_bits( src ));
7698 ins_pipe( ialu_mem_imm );
7699 %}
7701 // Store immediate Float value (it is faster than store from XMM register)
7702 // The instruction usage is guarded by predicate in operand immXF().
7703 instruct storeX_imm( memory mem, immXF src) %{
7704 match(Set mem (StoreF mem src));
7706 ins_cost(50);
7707 format %{ "MOV $mem,$src\t# store float" %}
7708 opcode(0xC7); /* C7 /0 */
7709 ins_encode( OpcP, RMopc_Mem(0x00,mem), Con32XF_as_bits( src ));
7710 ins_pipe( ialu_mem_imm );
7711 %}
7713 // Store Integer to stack slot
7714 instruct storeSSI(stackSlotI dst, eRegI src) %{
7715 match(Set dst src);
7717 ins_cost(100);
7718 format %{ "MOV $dst,$src" %}
7719 opcode(0x89);
7720 ins_encode( OpcPRegSS( dst, src ) );
7721 ins_pipe( ialu_mem_reg );
7722 %}
7724 // Store Integer to stack slot
7725 instruct storeSSP(stackSlotP dst, eRegP src) %{
7726 match(Set dst src);
7728 ins_cost(100);
7729 format %{ "MOV $dst,$src" %}
7730 opcode(0x89);
7731 ins_encode( OpcPRegSS( dst, src ) );
7732 ins_pipe( ialu_mem_reg );
7733 %}
7735 // Store Long to stack slot
7736 instruct storeSSL(stackSlotL dst, eRegL src) %{
7737 match(Set dst src);
7739 ins_cost(200);
7740 format %{ "MOV $dst,$src.lo\n\t"
7741 "MOV $dst+4,$src.hi" %}
7742 opcode(0x89, 0x89);
7743 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
7744 ins_pipe( ialu_mem_long_reg );
7745 %}
7747 //----------MemBar Instructions-----------------------------------------------
7748 // Memory barrier flavors
7750 instruct membar_acquire() %{
7751 match(MemBarAcquire);
7752 ins_cost(400);
7754 size(0);
7755 format %{ "MEMBAR-acquire ! (empty encoding)" %}
7756 ins_encode();
7757 ins_pipe(empty);
7758 %}
7760 instruct membar_acquire_lock() %{
7761 match(MemBarAcquire);
7762 predicate(Matcher::prior_fast_lock(n));
7763 ins_cost(0);
7765 size(0);
7766 format %{ "MEMBAR-acquire (prior CMPXCHG in FastLock so empty encoding)" %}
7767 ins_encode( );
7768 ins_pipe(empty);
7769 %}
7771 instruct membar_release() %{
7772 match(MemBarRelease);
7773 ins_cost(400);
7775 size(0);
7776 format %{ "MEMBAR-release ! (empty encoding)" %}
7777 ins_encode( );
7778 ins_pipe(empty);
7779 %}
7781 instruct membar_release_lock() %{
7782 match(MemBarRelease);
7783 predicate(Matcher::post_fast_unlock(n));
7784 ins_cost(0);
7786 size(0);
7787 format %{ "MEMBAR-release (a FastUnlock follows so empty encoding)" %}
7788 ins_encode( );
7789 ins_pipe(empty);
7790 %}
7792 instruct membar_volatile(eFlagsReg cr) %{
7793 match(MemBarVolatile);
7794 effect(KILL cr);
7795 ins_cost(400);
7797 format %{
7798 $$template
7799 if (os::is_MP()) {
7800 $$emit$$"LOCK ADDL [ESP + #0], 0\t! membar_volatile"
7801 } else {
7802 $$emit$$"MEMBAR-volatile ! (empty encoding)"
7803 }
7804 %}
7805 ins_encode %{
7806 __ membar(Assembler::StoreLoad);
7807 %}
7808 ins_pipe(pipe_slow);
7809 %}
7811 instruct unnecessary_membar_volatile() %{
7812 match(MemBarVolatile);
7813 predicate(Matcher::post_store_load_barrier(n));
7814 ins_cost(0);
7816 size(0);
7817 format %{ "MEMBAR-volatile (unnecessary so empty encoding)" %}
7818 ins_encode( );
7819 ins_pipe(empty);
7820 %}
7822 //----------Move Instructions--------------------------------------------------
7823 instruct castX2P(eAXRegP dst, eAXRegI src) %{
7824 match(Set dst (CastX2P src));
7825 format %{ "# X2P $dst, $src" %}
7826 ins_encode( /*empty encoding*/ );
7827 ins_cost(0);
7828 ins_pipe(empty);
7829 %}
7831 instruct castP2X(eRegI dst, eRegP src ) %{
7832 match(Set dst (CastP2X src));
7833 ins_cost(50);
7834 format %{ "MOV $dst, $src\t# CastP2X" %}
7835 ins_encode( enc_Copy( dst, src) );
7836 ins_pipe( ialu_reg_reg );
7837 %}
7839 //----------Conditional Move---------------------------------------------------
7840 // Conditional move
7841 instruct cmovI_reg(eRegI dst, eRegI src, eFlagsReg cr, cmpOp cop ) %{
7842 predicate(VM_Version::supports_cmov() );
7843 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7844 ins_cost(200);
7845 format %{ "CMOV$cop $dst,$src" %}
7846 opcode(0x0F,0x40);
7847 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7848 ins_pipe( pipe_cmov_reg );
7849 %}
7851 instruct cmovI_regU( cmpOpU cop, eFlagsRegU cr, eRegI dst, eRegI src ) %{
7852 predicate(VM_Version::supports_cmov() );
7853 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7854 ins_cost(200);
7855 format %{ "CMOV$cop $dst,$src" %}
7856 opcode(0x0F,0x40);
7857 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7858 ins_pipe( pipe_cmov_reg );
7859 %}
7861 instruct cmovI_regUCF( cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, eRegI src ) %{
7862 predicate(VM_Version::supports_cmov() );
7863 match(Set dst (CMoveI (Binary cop cr) (Binary dst src)));
7864 ins_cost(200);
7865 expand %{
7866 cmovI_regU(cop, cr, dst, src);
7867 %}
7868 %}
7870 // Conditional move
7871 instruct cmovI_mem(cmpOp cop, eFlagsReg cr, eRegI dst, memory src) %{
7872 predicate(VM_Version::supports_cmov() );
7873 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7874 ins_cost(250);
7875 format %{ "CMOV$cop $dst,$src" %}
7876 opcode(0x0F,0x40);
7877 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7878 ins_pipe( pipe_cmov_mem );
7879 %}
7881 // Conditional move
7882 instruct cmovI_memU(cmpOpU cop, eFlagsRegU cr, eRegI dst, memory src) %{
7883 predicate(VM_Version::supports_cmov() );
7884 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7885 ins_cost(250);
7886 format %{ "CMOV$cop $dst,$src" %}
7887 opcode(0x0F,0x40);
7888 ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7889 ins_pipe( pipe_cmov_mem );
7890 %}
7892 instruct cmovI_memUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegI dst, memory src) %{
7893 predicate(VM_Version::supports_cmov() );
7894 match(Set dst (CMoveI (Binary cop cr) (Binary dst (LoadI src))));
7895 ins_cost(250);
7896 expand %{
7897 cmovI_memU(cop, cr, dst, src);
7898 %}
7899 %}
7901 // Conditional move
7902 instruct cmovP_reg(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7903 predicate(VM_Version::supports_cmov() );
7904 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7905 ins_cost(200);
7906 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7907 opcode(0x0F,0x40);
7908 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7909 ins_pipe( pipe_cmov_reg );
7910 %}
7912 // Conditional move (non-P6 version)
7913 // Note: a CMoveP is generated for stubs and native wrappers
7914 // regardless of whether we are on a P6, so we
7915 // emulate a cmov here
7916 instruct cmovP_reg_nonP6(eRegP dst, eRegP src, eFlagsReg cr, cmpOp cop ) %{
7917 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7918 ins_cost(300);
7919 format %{ "Jn$cop skip\n\t"
7920 "MOV $dst,$src\t# pointer\n"
7921 "skip:" %}
7922 opcode(0x8b);
7923 ins_encode( enc_cmov_branch(cop, 0x2), OpcP, RegReg(dst, src));
7924 ins_pipe( pipe_cmov_reg );
7925 %}
7927 // Conditional move
7928 instruct cmovP_regU(cmpOpU cop, eFlagsRegU cr, eRegP dst, eRegP src ) %{
7929 predicate(VM_Version::supports_cmov() );
7930 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7931 ins_cost(200);
7932 format %{ "CMOV$cop $dst,$src\t# ptr" %}
7933 opcode(0x0F,0x40);
7934 ins_encode( enc_cmov(cop), RegReg( dst, src ) );
7935 ins_pipe( pipe_cmov_reg );
7936 %}
7938 instruct cmovP_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegP dst, eRegP src ) %{
7939 predicate(VM_Version::supports_cmov() );
7940 match(Set dst (CMoveP (Binary cop cr) (Binary dst src)));
7941 ins_cost(200);
7942 expand %{
7943 cmovP_regU(cop, cr, dst, src);
7944 %}
7945 %}
7947 // DISABLED: Requires the ADLC to emit a bottom_type call that
7948 // correctly meets the two pointer arguments; one is an incoming
7949 // register but the other is a memory operand. ALSO appears to
7950 // be buggy with implicit null checks.
7951 //
7952 //// Conditional move
7953 //instruct cmovP_mem(cmpOp cop, eFlagsReg cr, eRegP dst, memory src) %{
7954 // predicate(VM_Version::supports_cmov() );
7955 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
7956 // ins_cost(250);
7957 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
7958 // opcode(0x0F,0x40);
7959 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7960 // ins_pipe( pipe_cmov_mem );
7961 //%}
7962 //
7963 //// Conditional move
7964 //instruct cmovP_memU(cmpOpU cop, eFlagsRegU cr, eRegP dst, memory src) %{
7965 // predicate(VM_Version::supports_cmov() );
7966 // match(Set dst (CMoveP (Binary cop cr) (Binary dst (LoadP src))));
7967 // ins_cost(250);
7968 // format %{ "CMOV$cop $dst,$src\t# ptr" %}
7969 // opcode(0x0F,0x40);
7970 // ins_encode( enc_cmov(cop), RegMem( dst, src ) );
7971 // ins_pipe( pipe_cmov_mem );
7972 //%}
7974 // Conditional move
7975 instruct fcmovD_regU(cmpOp_fcmov cop, eFlagsRegU cr, regDPR1 dst, regD src) %{
7976 predicate(UseSSE<=1);
7977 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
7978 ins_cost(200);
7979 format %{ "FCMOV$cop $dst,$src\t# double" %}
7980 opcode(0xDA);
7981 ins_encode( enc_cmov_d(cop,src) );
7982 ins_pipe( pipe_cmovD_reg );
7983 %}
7985 // Conditional move
7986 instruct fcmovF_regU(cmpOp_fcmov cop, eFlagsRegU cr, regFPR1 dst, regF src) %{
7987 predicate(UseSSE==0);
7988 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
7989 ins_cost(200);
7990 format %{ "FCMOV$cop $dst,$src\t# float" %}
7991 opcode(0xDA);
7992 ins_encode( enc_cmov_d(cop,src) );
7993 ins_pipe( pipe_cmovD_reg );
7994 %}
7996 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
7997 instruct fcmovD_regS(cmpOp cop, eFlagsReg cr, regD dst, regD src) %{
7998 predicate(UseSSE<=1);
7999 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8000 ins_cost(200);
8001 format %{ "Jn$cop skip\n\t"
8002 "MOV $dst,$src\t# double\n"
8003 "skip:" %}
8004 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8005 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_D(src), OpcP, RegOpc(dst) );
8006 ins_pipe( pipe_cmovD_reg );
8007 %}
8009 // Float CMOV on Intel doesn't handle *signed* compares, only unsigned.
8010 instruct fcmovF_regS(cmpOp cop, eFlagsReg cr, regF dst, regF src) %{
8011 predicate(UseSSE==0);
8012 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8013 ins_cost(200);
8014 format %{ "Jn$cop skip\n\t"
8015 "MOV $dst,$src\t# float\n"
8016 "skip:" %}
8017 opcode (0xdd, 0x3); /* DD D8+i or DD /3 */
8018 ins_encode( enc_cmov_branch( cop, 0x4 ), Push_Reg_F(src), OpcP, RegOpc(dst) );
8019 ins_pipe( pipe_cmovD_reg );
8020 %}
8022 // No CMOVE with SSE/SSE2
8023 instruct fcmovX_regS(cmpOp cop, eFlagsReg cr, regX dst, regX src) %{
8024 predicate (UseSSE>=1);
8025 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8026 ins_cost(200);
8027 format %{ "Jn$cop skip\n\t"
8028 "MOVSS $dst,$src\t# float\n"
8029 "skip:" %}
8030 ins_encode %{
8031 Label skip;
8032 // Invert sense of branch from sense of CMOV
8033 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8034 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8035 __ bind(skip);
8036 %}
8037 ins_pipe( pipe_slow );
8038 %}
8040 // No CMOVE with SSE/SSE2
8041 instruct fcmovXD_regS(cmpOp cop, eFlagsReg cr, regXD dst, regXD src) %{
8042 predicate (UseSSE>=2);
8043 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8044 ins_cost(200);
8045 format %{ "Jn$cop skip\n\t"
8046 "MOVSD $dst,$src\t# float\n"
8047 "skip:" %}
8048 ins_encode %{
8049 Label skip;
8050 // Invert sense of branch from sense of CMOV
8051 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8052 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8053 __ bind(skip);
8054 %}
8055 ins_pipe( pipe_slow );
8056 %}
8058 // unsigned version
8059 instruct fcmovX_regU(cmpOpU cop, eFlagsRegU cr, regX dst, regX src) %{
8060 predicate (UseSSE>=1);
8061 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8062 ins_cost(200);
8063 format %{ "Jn$cop skip\n\t"
8064 "MOVSS $dst,$src\t# float\n"
8065 "skip:" %}
8066 ins_encode %{
8067 Label skip;
8068 // Invert sense of branch from sense of CMOV
8069 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8070 __ movflt($dst$$XMMRegister, $src$$XMMRegister);
8071 __ bind(skip);
8072 %}
8073 ins_pipe( pipe_slow );
8074 %}
8076 instruct fcmovX_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regX dst, regX src) %{
8077 predicate (UseSSE>=1);
8078 match(Set dst (CMoveF (Binary cop cr) (Binary dst src)));
8079 ins_cost(200);
8080 expand %{
8081 fcmovX_regU(cop, cr, dst, src);
8082 %}
8083 %}
8085 // unsigned version
8086 instruct fcmovXD_regU(cmpOpU cop, eFlagsRegU cr, regXD dst, regXD src) %{
8087 predicate (UseSSE>=2);
8088 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8089 ins_cost(200);
8090 format %{ "Jn$cop skip\n\t"
8091 "MOVSD $dst,$src\t# float\n"
8092 "skip:" %}
8093 ins_encode %{
8094 Label skip;
8095 // Invert sense of branch from sense of CMOV
8096 __ jccb((Assembler::Condition)($cop$$cmpcode^1), skip);
8097 __ movdbl($dst$$XMMRegister, $src$$XMMRegister);
8098 __ bind(skip);
8099 %}
8100 ins_pipe( pipe_slow );
8101 %}
8103 instruct fcmovXD_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, regXD dst, regXD src) %{
8104 predicate (UseSSE>=2);
8105 match(Set dst (CMoveD (Binary cop cr) (Binary dst src)));
8106 ins_cost(200);
8107 expand %{
8108 fcmovXD_regU(cop, cr, dst, src);
8109 %}
8110 %}
8112 instruct cmovL_reg(cmpOp cop, eFlagsReg cr, eRegL dst, eRegL src) %{
8113 predicate(VM_Version::supports_cmov() );
8114 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8115 ins_cost(200);
8116 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8117 "CMOV$cop $dst.hi,$src.hi" %}
8118 opcode(0x0F,0x40);
8119 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8120 ins_pipe( pipe_cmov_reg_long );
8121 %}
8123 instruct cmovL_regU(cmpOpU cop, eFlagsRegU cr, eRegL dst, eRegL src) %{
8124 predicate(VM_Version::supports_cmov() );
8125 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8126 ins_cost(200);
8127 format %{ "CMOV$cop $dst.lo,$src.lo\n\t"
8128 "CMOV$cop $dst.hi,$src.hi" %}
8129 opcode(0x0F,0x40);
8130 ins_encode( enc_cmov(cop), RegReg_Lo2( dst, src ), enc_cmov(cop), RegReg_Hi2( dst, src ) );
8131 ins_pipe( pipe_cmov_reg_long );
8132 %}
8134 instruct cmovL_regUCF(cmpOpUCF cop, eFlagsRegUCF cr, eRegL dst, eRegL src) %{
8135 predicate(VM_Version::supports_cmov() );
8136 match(Set dst (CMoveL (Binary cop cr) (Binary dst src)));
8137 ins_cost(200);
8138 expand %{
8139 cmovL_regU(cop, cr, dst, src);
8140 %}
8141 %}
8143 //----------Arithmetic Instructions--------------------------------------------
8144 //----------Addition Instructions----------------------------------------------
8145 // Integer Addition Instructions
8146 instruct addI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8147 match(Set dst (AddI dst src));
8148 effect(KILL cr);
8150 size(2);
8151 format %{ "ADD $dst,$src" %}
8152 opcode(0x03);
8153 ins_encode( OpcP, RegReg( dst, src) );
8154 ins_pipe( ialu_reg_reg );
8155 %}
8157 instruct addI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8158 match(Set dst (AddI dst src));
8159 effect(KILL cr);
8161 format %{ "ADD $dst,$src" %}
8162 opcode(0x81, 0x00); /* /0 id */
8163 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8164 ins_pipe( ialu_reg );
8165 %}
8167 instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
8168 predicate(UseIncDec);
8169 match(Set dst (AddI dst src));
8170 effect(KILL cr);
8172 size(1);
8173 format %{ "INC $dst" %}
8174 opcode(0x40); /* */
8175 ins_encode( Opc_plus( primary, dst ) );
8176 ins_pipe( ialu_reg );
8177 %}
8179 instruct leaI_eReg_immI(eRegI dst, eRegI src0, immI src1) %{
8180 match(Set dst (AddI src0 src1));
8181 ins_cost(110);
8183 format %{ "LEA $dst,[$src0 + $src1]" %}
8184 opcode(0x8D); /* 0x8D /r */
8185 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8186 ins_pipe( ialu_reg_reg );
8187 %}
8189 instruct leaP_eReg_immI(eRegP dst, eRegP src0, immI src1) %{
8190 match(Set dst (AddP src0 src1));
8191 ins_cost(110);
8193 format %{ "LEA $dst,[$src0 + $src1]\t# ptr" %}
8194 opcode(0x8D); /* 0x8D /r */
8195 ins_encode( OpcP, RegLea( dst, src0, src1 ) );
8196 ins_pipe( ialu_reg_reg );
8197 %}
8199 instruct decI_eReg(eRegI dst, immI_M1 src, eFlagsReg cr) %{
8200 predicate(UseIncDec);
8201 match(Set dst (AddI dst src));
8202 effect(KILL cr);
8204 size(1);
8205 format %{ "DEC $dst" %}
8206 opcode(0x48); /* */
8207 ins_encode( Opc_plus( primary, dst ) );
8208 ins_pipe( ialu_reg );
8209 %}
8211 instruct addP_eReg(eRegP dst, eRegI src, eFlagsReg cr) %{
8212 match(Set dst (AddP dst src));
8213 effect(KILL cr);
8215 size(2);
8216 format %{ "ADD $dst,$src" %}
8217 opcode(0x03);
8218 ins_encode( OpcP, RegReg( dst, src) );
8219 ins_pipe( ialu_reg_reg );
8220 %}
8222 instruct addP_eReg_imm(eRegP dst, immI src, eFlagsReg cr) %{
8223 match(Set dst (AddP dst src));
8224 effect(KILL cr);
8226 format %{ "ADD $dst,$src" %}
8227 opcode(0x81,0x00); /* Opcode 81 /0 id */
8228 // ins_encode( RegImm( dst, src) );
8229 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8230 ins_pipe( ialu_reg );
8231 %}
8233 instruct addI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8234 match(Set dst (AddI dst (LoadI src)));
8235 effect(KILL cr);
8237 ins_cost(125);
8238 format %{ "ADD $dst,$src" %}
8239 opcode(0x03);
8240 ins_encode( OpcP, RegMem( dst, src) );
8241 ins_pipe( ialu_reg_mem );
8242 %}
8244 instruct addI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8245 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8246 effect(KILL cr);
8248 ins_cost(150);
8249 format %{ "ADD $dst,$src" %}
8250 opcode(0x01); /* Opcode 01 /r */
8251 ins_encode( OpcP, RegMem( src, dst ) );
8252 ins_pipe( ialu_mem_reg );
8253 %}
8255 // Add Memory with Immediate
8256 instruct addI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
8257 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8258 effect(KILL cr);
8260 ins_cost(125);
8261 format %{ "ADD $dst,$src" %}
8262 opcode(0x81); /* Opcode 81 /0 id */
8263 ins_encode( OpcSE( src ), RMopc_Mem(0x00,dst), Con8or32( src ) );
8264 ins_pipe( ialu_mem_imm );
8265 %}
8267 instruct incI_mem(memory dst, immI1 src, eFlagsReg cr) %{
8268 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8269 effect(KILL cr);
8271 ins_cost(125);
8272 format %{ "INC $dst" %}
8273 opcode(0xFF); /* Opcode FF /0 */
8274 ins_encode( OpcP, RMopc_Mem(0x00,dst));
8275 ins_pipe( ialu_mem_imm );
8276 %}
8278 instruct decI_mem(memory dst, immI_M1 src, eFlagsReg cr) %{
8279 match(Set dst (StoreI dst (AddI (LoadI dst) src)));
8280 effect(KILL cr);
8282 ins_cost(125);
8283 format %{ "DEC $dst" %}
8284 opcode(0xFF); /* Opcode FF /1 */
8285 ins_encode( OpcP, RMopc_Mem(0x01,dst));
8286 ins_pipe( ialu_mem_imm );
8287 %}
8290 instruct checkCastPP( eRegP dst ) %{
8291 match(Set dst (CheckCastPP dst));
8293 size(0);
8294 format %{ "#checkcastPP of $dst" %}
8295 ins_encode( /*empty encoding*/ );
8296 ins_pipe( empty );
8297 %}
8299 instruct castPP( eRegP dst ) %{
8300 match(Set dst (CastPP dst));
8301 format %{ "#castPP of $dst" %}
8302 ins_encode( /*empty encoding*/ );
8303 ins_pipe( empty );
8304 %}
8306 instruct castII( eRegI dst ) %{
8307 match(Set dst (CastII dst));
8308 format %{ "#castII of $dst" %}
8309 ins_encode( /*empty encoding*/ );
8310 ins_cost(0);
8311 ins_pipe( empty );
8312 %}
8315 // Load-locked - same as a regular pointer load when used with compare-swap
8316 instruct loadPLocked(eRegP dst, memory mem) %{
8317 match(Set dst (LoadPLocked mem));
8319 ins_cost(125);
8320 format %{ "MOV $dst,$mem\t# Load ptr. locked" %}
8321 opcode(0x8B);
8322 ins_encode( OpcP, RegMem(dst,mem));
8323 ins_pipe( ialu_reg_mem );
8324 %}
8326 // LoadLong-locked - same as a volatile long load when used with compare-swap
8327 instruct loadLLocked(stackSlotL dst, load_long_memory mem) %{
8328 predicate(UseSSE<=1);
8329 match(Set dst (LoadLLocked mem));
8331 ins_cost(200);
8332 format %{ "FILD $mem\t# Atomic volatile long load\n\t"
8333 "FISTp $dst" %}
8334 ins_encode(enc_loadL_volatile(mem,dst));
8335 ins_pipe( fpu_reg_mem );
8336 %}
8338 instruct loadLX_Locked(stackSlotL dst, load_long_memory mem, regXD tmp) %{
8339 predicate(UseSSE>=2);
8340 match(Set dst (LoadLLocked mem));
8341 effect(TEMP tmp);
8342 ins_cost(180);
8343 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8344 "MOVSD $dst,$tmp" %}
8345 ins_encode(enc_loadLX_volatile(mem, dst, tmp));
8346 ins_pipe( pipe_slow );
8347 %}
8349 instruct loadLX_reg_Locked(eRegL dst, load_long_memory mem, regXD tmp) %{
8350 predicate(UseSSE>=2);
8351 match(Set dst (LoadLLocked mem));
8352 effect(TEMP tmp);
8353 ins_cost(160);
8354 format %{ "MOVSD $tmp,$mem\t# Atomic volatile long load\n\t"
8355 "MOVD $dst.lo,$tmp\n\t"
8356 "PSRLQ $tmp,32\n\t"
8357 "MOVD $dst.hi,$tmp" %}
8358 ins_encode(enc_loadLX_reg_volatile(mem, dst, tmp));
8359 ins_pipe( pipe_slow );
8360 %}
8362 // Conditional-store of the updated heap-top.
8363 // Used during allocation of the shared heap.
8364 // Sets flags (EQ) on success. Implemented with a CMPXCHG on Intel.
8365 instruct storePConditional( memory heap_top_ptr, eAXRegP oldval, eRegP newval, eFlagsReg cr ) %{
8366 match(Set cr (StorePConditional heap_top_ptr (Binary oldval newval)));
8367 // EAX is killed if there is contention, but then it's also unused.
8368 // In the common case of no contention, EAX holds the new oop address.
8369 format %{ "CMPXCHG $heap_top_ptr,$newval\t# If EAX==$heap_top_ptr Then store $newval into $heap_top_ptr" %}
8370 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval,heap_top_ptr) );
8371 ins_pipe( pipe_cmpxchg );
8372 %}
8374 // Conditional-store of an int value.
8375 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG on Intel.
8376 instruct storeIConditional( memory mem, eAXRegI oldval, eRegI newval, eFlagsReg cr ) %{
8377 match(Set cr (StoreIConditional mem (Binary oldval newval)));
8378 effect(KILL oldval);
8379 format %{ "CMPXCHG $mem,$newval\t# If EAX==$mem Then store $newval into $mem" %}
8380 ins_encode( lock_prefix, Opcode(0x0F), Opcode(0xB1), RegMem(newval, mem) );
8381 ins_pipe( pipe_cmpxchg );
8382 %}
8384 // Conditional-store of a long value.
8385 // ZF flag is set on success, reset otherwise. Implemented with a CMPXCHG8 on Intel.
8386 instruct storeLConditional( memory mem, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8387 match(Set cr (StoreLConditional mem (Binary oldval newval)));
8388 effect(KILL oldval);
8389 format %{ "XCHG EBX,ECX\t# correct order for CMPXCHG8 instruction\n\t"
8390 "CMPXCHG8 $mem,ECX:EBX\t# If EDX:EAX==$mem Then store ECX:EBX into $mem\n\t"
8391 "XCHG EBX,ECX"
8392 %}
8393 ins_encode %{
8394 // Note: we need to swap rbx, and rcx before and after the
8395 // cmpxchg8 instruction because the instruction uses
8396 // rcx as the high order word of the new value to store but
8397 // our register encoding uses rbx.
8398 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8399 if( os::is_MP() )
8400 __ lock();
8401 __ cmpxchg8($mem$$Address);
8402 __ xchgl(as_Register(EBX_enc), as_Register(ECX_enc));
8403 %}
8404 ins_pipe( pipe_cmpxchg );
8405 %}
8407 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them
8409 instruct compareAndSwapL( eRegI res, eSIRegP mem_ptr, eADXRegL oldval, eBCXRegL newval, eFlagsReg cr ) %{
8410 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval)));
8411 effect(KILL cr, KILL oldval);
8412 format %{ "CMPXCHG8 [$mem_ptr],$newval\t# If EDX:EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8413 "MOV $res,0\n\t"
8414 "JNE,s fail\n\t"
8415 "MOV $res,1\n"
8416 "fail:" %}
8417 ins_encode( enc_cmpxchg8(mem_ptr),
8418 enc_flags_ne_to_boolean(res) );
8419 ins_pipe( pipe_cmpxchg );
8420 %}
8422 instruct compareAndSwapP( eRegI res, pRegP mem_ptr, eAXRegP oldval, eCXRegP newval, eFlagsReg cr) %{
8423 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval)));
8424 effect(KILL cr, KILL oldval);
8425 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8426 "MOV $res,0\n\t"
8427 "JNE,s fail\n\t"
8428 "MOV $res,1\n"
8429 "fail:" %}
8430 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8431 ins_pipe( pipe_cmpxchg );
8432 %}
8434 instruct compareAndSwapI( eRegI res, pRegP mem_ptr, eAXRegI oldval, eCXRegI newval, eFlagsReg cr) %{
8435 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval)));
8436 effect(KILL cr, KILL oldval);
8437 format %{ "CMPXCHG [$mem_ptr],$newval\t# If EAX==[$mem_ptr] Then store $newval into [$mem_ptr]\n\t"
8438 "MOV $res,0\n\t"
8439 "JNE,s fail\n\t"
8440 "MOV $res,1\n"
8441 "fail:" %}
8442 ins_encode( enc_cmpxchg(mem_ptr), enc_flags_ne_to_boolean(res) );
8443 ins_pipe( pipe_cmpxchg );
8444 %}
8446 //----------Subtraction Instructions-------------------------------------------
8447 // Integer Subtraction Instructions
8448 instruct subI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8449 match(Set dst (SubI dst src));
8450 effect(KILL cr);
8452 size(2);
8453 format %{ "SUB $dst,$src" %}
8454 opcode(0x2B);
8455 ins_encode( OpcP, RegReg( dst, src) );
8456 ins_pipe( ialu_reg_reg );
8457 %}
8459 instruct subI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8460 match(Set dst (SubI dst src));
8461 effect(KILL cr);
8463 format %{ "SUB $dst,$src" %}
8464 opcode(0x81,0x05); /* Opcode 81 /5 */
8465 // ins_encode( RegImm( dst, src) );
8466 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8467 ins_pipe( ialu_reg );
8468 %}
8470 instruct subI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8471 match(Set dst (SubI dst (LoadI src)));
8472 effect(KILL cr);
8474 ins_cost(125);
8475 format %{ "SUB $dst,$src" %}
8476 opcode(0x2B);
8477 ins_encode( OpcP, RegMem( dst, src) );
8478 ins_pipe( ialu_reg_mem );
8479 %}
8481 instruct subI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
8482 match(Set dst (StoreI dst (SubI (LoadI dst) src)));
8483 effect(KILL cr);
8485 ins_cost(150);
8486 format %{ "SUB $dst,$src" %}
8487 opcode(0x29); /* Opcode 29 /r */
8488 ins_encode( OpcP, RegMem( src, dst ) );
8489 ins_pipe( ialu_mem_reg );
8490 %}
8492 // Subtract from a pointer
8493 instruct subP_eReg(eRegP dst, eRegI src, immI0 zero, eFlagsReg cr) %{
8494 match(Set dst (AddP dst (SubI zero src)));
8495 effect(KILL cr);
8497 size(2);
8498 format %{ "SUB $dst,$src" %}
8499 opcode(0x2B);
8500 ins_encode( OpcP, RegReg( dst, src) );
8501 ins_pipe( ialu_reg_reg );
8502 %}
8504 instruct negI_eReg(eRegI dst, immI0 zero, eFlagsReg cr) %{
8505 match(Set dst (SubI zero dst));
8506 effect(KILL cr);
8508 size(2);
8509 format %{ "NEG $dst" %}
8510 opcode(0xF7,0x03); // Opcode F7 /3
8511 ins_encode( OpcP, RegOpc( dst ) );
8512 ins_pipe( ialu_reg );
8513 %}
8516 //----------Multiplication/Division Instructions-------------------------------
8517 // Integer Multiplication Instructions
8518 // Multiply Register
8519 instruct mulI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8520 match(Set dst (MulI dst src));
8521 effect(KILL cr);
8523 size(3);
8524 ins_cost(300);
8525 format %{ "IMUL $dst,$src" %}
8526 opcode(0xAF, 0x0F);
8527 ins_encode( OpcS, OpcP, RegReg( dst, src) );
8528 ins_pipe( ialu_reg_reg_alu0 );
8529 %}
8531 // Multiply 32-bit Immediate
8532 instruct mulI_eReg_imm(eRegI dst, eRegI src, immI imm, eFlagsReg cr) %{
8533 match(Set dst (MulI src imm));
8534 effect(KILL cr);
8536 ins_cost(300);
8537 format %{ "IMUL $dst,$src,$imm" %}
8538 opcode(0x69); /* 69 /r id */
8539 ins_encode( OpcSE(imm), RegReg( dst, src ), Con8or32( imm ) );
8540 ins_pipe( ialu_reg_reg_alu0 );
8541 %}
8543 instruct loadConL_low_only(eADXRegL_low_only dst, immL32 src, eFlagsReg cr) %{
8544 match(Set dst src);
8545 effect(KILL cr);
8547 // Note that this is artificially increased to make it more expensive than loadConL
8548 ins_cost(250);
8549 format %{ "MOV EAX,$src\t// low word only" %}
8550 opcode(0xB8);
8551 ins_encode( LdImmL_Lo(dst, src) );
8552 ins_pipe( ialu_reg_fat );
8553 %}
8555 // Multiply by 32-bit Immediate, taking the shifted high order results
8556 // (special case for shift by 32)
8557 instruct mulI_imm_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32 cnt, eFlagsReg cr) %{
8558 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8559 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8560 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8561 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8562 effect(USE src1, KILL cr);
8564 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8565 ins_cost(0*100 + 1*400 - 150);
8566 format %{ "IMUL EDX:EAX,$src1" %}
8567 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8568 ins_pipe( pipe_slow );
8569 %}
8571 // Multiply by 32-bit Immediate, taking the shifted high order results
8572 instruct mulI_imm_RShift_high(eDXRegI dst, nadxRegI src1, eADXRegL_low_only src2, immI_32_63 cnt, eFlagsReg cr) %{
8573 match(Set dst (ConvL2I (RShiftL (MulL (ConvI2L src1) src2) cnt)));
8574 predicate( _kids[0]->_kids[0]->_kids[1]->_leaf->Opcode() == Op_ConL &&
8575 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() >= min_jint &&
8576 _kids[0]->_kids[0]->_kids[1]->_leaf->as_Type()->type()->is_long()->get_con() <= max_jint );
8577 effect(USE src1, KILL cr);
8579 // Note that this is adjusted by 150 to compensate for the overcosting of loadConL_low_only
8580 ins_cost(1*100 + 1*400 - 150);
8581 format %{ "IMUL EDX:EAX,$src1\n\t"
8582 "SAR EDX,$cnt-32" %}
8583 ins_encode( multiply_con_and_shift_high( dst, src1, src2, cnt, cr ) );
8584 ins_pipe( pipe_slow );
8585 %}
8587 // Multiply Memory 32-bit Immediate
8588 instruct mulI_mem_imm(eRegI dst, memory src, immI imm, eFlagsReg cr) %{
8589 match(Set dst (MulI (LoadI src) imm));
8590 effect(KILL cr);
8592 ins_cost(300);
8593 format %{ "IMUL $dst,$src,$imm" %}
8594 opcode(0x69); /* 69 /r id */
8595 ins_encode( OpcSE(imm), RegMem( dst, src ), Con8or32( imm ) );
8596 ins_pipe( ialu_reg_mem_alu0 );
8597 %}
8599 // Multiply Memory
8600 instruct mulI(eRegI dst, memory src, eFlagsReg cr) %{
8601 match(Set dst (MulI dst (LoadI src)));
8602 effect(KILL cr);
8604 ins_cost(350);
8605 format %{ "IMUL $dst,$src" %}
8606 opcode(0xAF, 0x0F);
8607 ins_encode( OpcS, OpcP, RegMem( dst, src) );
8608 ins_pipe( ialu_reg_mem_alu0 );
8609 %}
8611 // Multiply Register Int to Long
8612 instruct mulI2L(eADXRegL dst, eAXRegI src, nadxRegI src1, eFlagsReg flags) %{
8613 // Basic Idea: long = (long)int * (long)int
8614 match(Set dst (MulL (ConvI2L src) (ConvI2L src1)));
8615 effect(DEF dst, USE src, USE src1, KILL flags);
8617 ins_cost(300);
8618 format %{ "IMUL $dst,$src1" %}
8620 ins_encode( long_int_multiply( dst, src1 ) );
8621 ins_pipe( ialu_reg_reg_alu0 );
8622 %}
8624 instruct mulIS_eReg(eADXRegL dst, immL_32bits mask, eFlagsReg flags, eAXRegI src, nadxRegI src1) %{
8625 // Basic Idea: long = (int & 0xffffffffL) * (int & 0xffffffffL)
8626 match(Set dst (MulL (AndL (ConvI2L src) mask) (AndL (ConvI2L src1) mask)));
8627 effect(KILL flags);
8629 ins_cost(300);
8630 format %{ "MUL $dst,$src1" %}
8632 ins_encode( long_uint_multiply(dst, src1) );
8633 ins_pipe( ialu_reg_reg_alu0 );
8634 %}
8636 // Multiply Register Long
8637 instruct mulL_eReg(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8638 match(Set dst (MulL dst src));
8639 effect(KILL cr, TEMP tmp);
8640 ins_cost(4*100+3*400);
8641 // Basic idea: lo(result) = lo(x_lo * y_lo)
8642 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) + lo(x_lo * y_hi)
8643 format %{ "MOV $tmp,$src.lo\n\t"
8644 "IMUL $tmp,EDX\n\t"
8645 "MOV EDX,$src.hi\n\t"
8646 "IMUL EDX,EAX\n\t"
8647 "ADD $tmp,EDX\n\t"
8648 "MUL EDX:EAX,$src.lo\n\t"
8649 "ADD EDX,$tmp" %}
8650 ins_encode( long_multiply( dst, src, tmp ) );
8651 ins_pipe( pipe_slow );
8652 %}
8654 // Multiply Register Long where the left operand's high 32 bits are zero
8655 instruct mulL_eReg_lhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8656 predicate(is_operand_hi32_zero(n->in(1)));
8657 match(Set dst (MulL dst src));
8658 effect(KILL cr, TEMP tmp);
8659 ins_cost(2*100+2*400);
8660 // Basic idea: lo(result) = lo(x_lo * y_lo)
8661 // hi(result) = hi(x_lo * y_lo) + lo(x_lo * y_hi) where lo(x_hi * y_lo) = 0 because x_hi = 0
8662 format %{ "MOV $tmp,$src.hi\n\t"
8663 "IMUL $tmp,EAX\n\t"
8664 "MUL EDX:EAX,$src.lo\n\t"
8665 "ADD EDX,$tmp" %}
8666 ins_encode %{
8667 __ movl($tmp$$Register, HIGH_FROM_LOW($src$$Register));
8668 __ imull($tmp$$Register, rax);
8669 __ mull($src$$Register);
8670 __ addl(rdx, $tmp$$Register);
8671 %}
8672 ins_pipe( pipe_slow );
8673 %}
8675 // Multiply Register Long where the right operand's high 32 bits are zero
8676 instruct mulL_eReg_rhi0(eADXRegL dst, eRegL src, eRegI tmp, eFlagsReg cr) %{
8677 predicate(is_operand_hi32_zero(n->in(2)));
8678 match(Set dst (MulL dst src));
8679 effect(KILL cr, TEMP tmp);
8680 ins_cost(2*100+2*400);
8681 // Basic idea: lo(result) = lo(x_lo * y_lo)
8682 // hi(result) = hi(x_lo * y_lo) + lo(x_hi * y_lo) where lo(x_lo * y_hi) = 0 because y_hi = 0
8683 format %{ "MOV $tmp,$src.lo\n\t"
8684 "IMUL $tmp,EDX\n\t"
8685 "MUL EDX:EAX,$src.lo\n\t"
8686 "ADD EDX,$tmp" %}
8687 ins_encode %{
8688 __ movl($tmp$$Register, $src$$Register);
8689 __ imull($tmp$$Register, rdx);
8690 __ mull($src$$Register);
8691 __ addl(rdx, $tmp$$Register);
8692 %}
8693 ins_pipe( pipe_slow );
8694 %}
8696 // Multiply Register Long where the left and the right operands' high 32 bits are zero
8697 instruct mulL_eReg_hi0(eADXRegL dst, eRegL src, eFlagsReg cr) %{
8698 predicate(is_operand_hi32_zero(n->in(1)) && is_operand_hi32_zero(n->in(2)));
8699 match(Set dst (MulL dst src));
8700 effect(KILL cr);
8701 ins_cost(1*400);
8702 // Basic idea: lo(result) = lo(x_lo * y_lo)
8703 // hi(result) = hi(x_lo * y_lo) where lo(x_hi * y_lo) = 0 and lo(x_lo * y_hi) = 0 because x_hi = 0 and y_hi = 0
8704 format %{ "MUL EDX:EAX,$src.lo\n\t" %}
8705 ins_encode %{
8706 __ mull($src$$Register);
8707 %}
8708 ins_pipe( pipe_slow );
8709 %}
8711 // Multiply Register Long by small constant
8712 instruct mulL_eReg_con(eADXRegL dst, immL_127 src, eRegI tmp, eFlagsReg cr) %{
8713 match(Set dst (MulL dst src));
8714 effect(KILL cr, TEMP tmp);
8715 ins_cost(2*100+2*400);
8716 size(12);
8717 // Basic idea: lo(result) = lo(src * EAX)
8718 // hi(result) = hi(src * EAX) + lo(src * EDX)
8719 format %{ "IMUL $tmp,EDX,$src\n\t"
8720 "MOV EDX,$src\n\t"
8721 "MUL EDX\t# EDX*EAX -> EDX:EAX\n\t"
8722 "ADD EDX,$tmp" %}
8723 ins_encode( long_multiply_con( dst, src, tmp ) );
8724 ins_pipe( pipe_slow );
8725 %}
8727 // Integer DIV with Register
8728 instruct divI_eReg(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8729 match(Set rax (DivI rax div));
8730 effect(KILL rdx, KILL cr);
8731 size(26);
8732 ins_cost(30*100+10*100);
8733 format %{ "CMP EAX,0x80000000\n\t"
8734 "JNE,s normal\n\t"
8735 "XOR EDX,EDX\n\t"
8736 "CMP ECX,-1\n\t"
8737 "JE,s done\n"
8738 "normal: CDQ\n\t"
8739 "IDIV $div\n\t"
8740 "done:" %}
8741 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8742 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8743 ins_pipe( ialu_reg_reg_alu0 );
8744 %}
8746 // Divide Register Long
8747 instruct divL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8748 match(Set dst (DivL src1 src2));
8749 effect( KILL cr, KILL cx, KILL bx );
8750 ins_cost(10000);
8751 format %{ "PUSH $src1.hi\n\t"
8752 "PUSH $src1.lo\n\t"
8753 "PUSH $src2.hi\n\t"
8754 "PUSH $src2.lo\n\t"
8755 "CALL SharedRuntime::ldiv\n\t"
8756 "ADD ESP,16" %}
8757 ins_encode( long_div(src1,src2) );
8758 ins_pipe( pipe_slow );
8759 %}
8761 // Integer DIVMOD with Register, both quotient and mod results
8762 instruct divModI_eReg_divmod(eAXRegI rax, eDXRegI rdx, eCXRegI div, eFlagsReg cr) %{
8763 match(DivModI rax div);
8764 effect(KILL cr);
8765 size(26);
8766 ins_cost(30*100+10*100);
8767 format %{ "CMP EAX,0x80000000\n\t"
8768 "JNE,s normal\n\t"
8769 "XOR EDX,EDX\n\t"
8770 "CMP ECX,-1\n\t"
8771 "JE,s done\n"
8772 "normal: CDQ\n\t"
8773 "IDIV $div\n\t"
8774 "done:" %}
8775 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8776 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8777 ins_pipe( pipe_slow );
8778 %}
8780 // Integer MOD with Register
8781 instruct modI_eReg(eDXRegI rdx, eAXRegI rax, eCXRegI div, eFlagsReg cr) %{
8782 match(Set rdx (ModI rax div));
8783 effect(KILL rax, KILL cr);
8785 size(26);
8786 ins_cost(300);
8787 format %{ "CDQ\n\t"
8788 "IDIV $div" %}
8789 opcode(0xF7, 0x7); /* Opcode F7 /7 */
8790 ins_encode( cdq_enc, OpcP, RegOpc(div) );
8791 ins_pipe( ialu_reg_reg_alu0 );
8792 %}
8794 // Remainder Register Long
8795 instruct modL_eReg( eADXRegL dst, eRegL src1, eRegL src2, eFlagsReg cr, eCXRegI cx, eBXRegI bx ) %{
8796 match(Set dst (ModL src1 src2));
8797 effect( KILL cr, KILL cx, KILL bx );
8798 ins_cost(10000);
8799 format %{ "PUSH $src1.hi\n\t"
8800 "PUSH $src1.lo\n\t"
8801 "PUSH $src2.hi\n\t"
8802 "PUSH $src2.lo\n\t"
8803 "CALL SharedRuntime::lrem\n\t"
8804 "ADD ESP,16" %}
8805 ins_encode( long_mod(src1,src2) );
8806 ins_pipe( pipe_slow );
8807 %}
8809 // Integer Shift Instructions
8810 // Shift Left by one
8811 instruct shlI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
8812 match(Set dst (LShiftI dst shift));
8813 effect(KILL cr);
8815 size(2);
8816 format %{ "SHL $dst,$shift" %}
8817 opcode(0xD1, 0x4); /* D1 /4 */
8818 ins_encode( OpcP, RegOpc( dst ) );
8819 ins_pipe( ialu_reg );
8820 %}
8822 // Shift Left by 8-bit immediate
8823 instruct salI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
8824 match(Set dst (LShiftI dst shift));
8825 effect(KILL cr);
8827 size(3);
8828 format %{ "SHL $dst,$shift" %}
8829 opcode(0xC1, 0x4); /* C1 /4 ib */
8830 ins_encode( RegOpcImm( dst, shift) );
8831 ins_pipe( ialu_reg );
8832 %}
8834 // Shift Left by variable
8835 instruct salI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
8836 match(Set dst (LShiftI dst shift));
8837 effect(KILL cr);
8839 size(2);
8840 format %{ "SHL $dst,$shift" %}
8841 opcode(0xD3, 0x4); /* D3 /4 */
8842 ins_encode( OpcP, RegOpc( dst ) );
8843 ins_pipe( ialu_reg_reg );
8844 %}
8846 // Arithmetic shift right by one
8847 instruct sarI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
8848 match(Set dst (RShiftI dst shift));
8849 effect(KILL cr);
8851 size(2);
8852 format %{ "SAR $dst,$shift" %}
8853 opcode(0xD1, 0x7); /* D1 /7 */
8854 ins_encode( OpcP, RegOpc( dst ) );
8855 ins_pipe( ialu_reg );
8856 %}
8858 // Arithmetic shift right by one
8859 instruct sarI_mem_1(memory dst, immI1 shift, eFlagsReg cr) %{
8860 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
8861 effect(KILL cr);
8862 format %{ "SAR $dst,$shift" %}
8863 opcode(0xD1, 0x7); /* D1 /7 */
8864 ins_encode( OpcP, RMopc_Mem(secondary,dst) );
8865 ins_pipe( ialu_mem_imm );
8866 %}
8868 // Arithmetic Shift Right by 8-bit immediate
8869 instruct sarI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
8870 match(Set dst (RShiftI dst shift));
8871 effect(KILL cr);
8873 size(3);
8874 format %{ "SAR $dst,$shift" %}
8875 opcode(0xC1, 0x7); /* C1 /7 ib */
8876 ins_encode( RegOpcImm( dst, shift ) );
8877 ins_pipe( ialu_mem_imm );
8878 %}
8880 // Arithmetic Shift Right by 8-bit immediate
8881 instruct sarI_mem_imm(memory dst, immI8 shift, eFlagsReg cr) %{
8882 match(Set dst (StoreI dst (RShiftI (LoadI dst) shift)));
8883 effect(KILL cr);
8885 format %{ "SAR $dst,$shift" %}
8886 opcode(0xC1, 0x7); /* C1 /7 ib */
8887 ins_encode( OpcP, RMopc_Mem(secondary, dst ), Con8or32( shift ) );
8888 ins_pipe( ialu_mem_imm );
8889 %}
8891 // Arithmetic Shift Right by variable
8892 instruct sarI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
8893 match(Set dst (RShiftI dst shift));
8894 effect(KILL cr);
8896 size(2);
8897 format %{ "SAR $dst,$shift" %}
8898 opcode(0xD3, 0x7); /* D3 /7 */
8899 ins_encode( OpcP, RegOpc( dst ) );
8900 ins_pipe( ialu_reg_reg );
8901 %}
8903 // Logical shift right by one
8904 instruct shrI_eReg_1(eRegI dst, immI1 shift, eFlagsReg cr) %{
8905 match(Set dst (URShiftI dst shift));
8906 effect(KILL cr);
8908 size(2);
8909 format %{ "SHR $dst,$shift" %}
8910 opcode(0xD1, 0x5); /* D1 /5 */
8911 ins_encode( OpcP, RegOpc( dst ) );
8912 ins_pipe( ialu_reg );
8913 %}
8915 // Logical Shift Right by 8-bit immediate
8916 instruct shrI_eReg_imm(eRegI dst, immI8 shift, eFlagsReg cr) %{
8917 match(Set dst (URShiftI dst shift));
8918 effect(KILL cr);
8920 size(3);
8921 format %{ "SHR $dst,$shift" %}
8922 opcode(0xC1, 0x5); /* C1 /5 ib */
8923 ins_encode( RegOpcImm( dst, shift) );
8924 ins_pipe( ialu_reg );
8925 %}
8928 // Logical Shift Right by 24, followed by Arithmetic Shift Left by 24.
8929 // This idiom is used by the compiler for the i2b bytecode.
8930 instruct i2b(eRegI dst, xRegI src, immI_24 twentyfour) %{
8931 match(Set dst (RShiftI (LShiftI src twentyfour) twentyfour));
8933 size(3);
8934 format %{ "MOVSX $dst,$src :8" %}
8935 ins_encode %{
8936 __ movsbl($dst$$Register, $src$$Register);
8937 %}
8938 ins_pipe(ialu_reg_reg);
8939 %}
8941 // Logical Shift Right by 16, followed by Arithmetic Shift Left by 16.
8942 // This idiom is used by the compiler the i2s bytecode.
8943 instruct i2s(eRegI dst, xRegI src, immI_16 sixteen) %{
8944 match(Set dst (RShiftI (LShiftI src sixteen) sixteen));
8946 size(3);
8947 format %{ "MOVSX $dst,$src :16" %}
8948 ins_encode %{
8949 __ movswl($dst$$Register, $src$$Register);
8950 %}
8951 ins_pipe(ialu_reg_reg);
8952 %}
8955 // Logical Shift Right by variable
8956 instruct shrI_eReg_CL(eRegI dst, eCXRegI shift, eFlagsReg cr) %{
8957 match(Set dst (URShiftI dst shift));
8958 effect(KILL cr);
8960 size(2);
8961 format %{ "SHR $dst,$shift" %}
8962 opcode(0xD3, 0x5); /* D3 /5 */
8963 ins_encode( OpcP, RegOpc( dst ) );
8964 ins_pipe( ialu_reg_reg );
8965 %}
8968 //----------Logical Instructions-----------------------------------------------
8969 //----------Integer Logical Instructions---------------------------------------
8970 // And Instructions
8971 // And Register with Register
8972 instruct andI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
8973 match(Set dst (AndI dst src));
8974 effect(KILL cr);
8976 size(2);
8977 format %{ "AND $dst,$src" %}
8978 opcode(0x23);
8979 ins_encode( OpcP, RegReg( dst, src) );
8980 ins_pipe( ialu_reg_reg );
8981 %}
8983 // And Register with Immediate
8984 instruct andI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
8985 match(Set dst (AndI dst src));
8986 effect(KILL cr);
8988 format %{ "AND $dst,$src" %}
8989 opcode(0x81,0x04); /* Opcode 81 /4 */
8990 // ins_encode( RegImm( dst, src) );
8991 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
8992 ins_pipe( ialu_reg );
8993 %}
8995 // And Register with Memory
8996 instruct andI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
8997 match(Set dst (AndI dst (LoadI src)));
8998 effect(KILL cr);
9000 ins_cost(125);
9001 format %{ "AND $dst,$src" %}
9002 opcode(0x23);
9003 ins_encode( OpcP, RegMem( dst, src) );
9004 ins_pipe( ialu_reg_mem );
9005 %}
9007 // And Memory with Register
9008 instruct andI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9009 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9010 effect(KILL cr);
9012 ins_cost(150);
9013 format %{ "AND $dst,$src" %}
9014 opcode(0x21); /* Opcode 21 /r */
9015 ins_encode( OpcP, RegMem( src, dst ) );
9016 ins_pipe( ialu_mem_reg );
9017 %}
9019 // And Memory with Immediate
9020 instruct andI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9021 match(Set dst (StoreI dst (AndI (LoadI dst) src)));
9022 effect(KILL cr);
9024 ins_cost(125);
9025 format %{ "AND $dst,$src" %}
9026 opcode(0x81, 0x4); /* Opcode 81 /4 id */
9027 // ins_encode( MemImm( dst, src) );
9028 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9029 ins_pipe( ialu_mem_imm );
9030 %}
9032 // Or Instructions
9033 // Or Register with Register
9034 instruct orI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9035 match(Set dst (OrI dst src));
9036 effect(KILL cr);
9038 size(2);
9039 format %{ "OR $dst,$src" %}
9040 opcode(0x0B);
9041 ins_encode( OpcP, RegReg( dst, src) );
9042 ins_pipe( ialu_reg_reg );
9043 %}
9045 instruct orI_eReg_castP2X(eRegI dst, eRegP src, eFlagsReg cr) %{
9046 match(Set dst (OrI dst (CastP2X src)));
9047 effect(KILL cr);
9049 size(2);
9050 format %{ "OR $dst,$src" %}
9051 opcode(0x0B);
9052 ins_encode( OpcP, RegReg( dst, src) );
9053 ins_pipe( ialu_reg_reg );
9054 %}
9057 // Or Register with Immediate
9058 instruct orI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9059 match(Set dst (OrI dst src));
9060 effect(KILL cr);
9062 format %{ "OR $dst,$src" %}
9063 opcode(0x81,0x01); /* Opcode 81 /1 id */
9064 // ins_encode( RegImm( dst, src) );
9065 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9066 ins_pipe( ialu_reg );
9067 %}
9069 // Or Register with Memory
9070 instruct orI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9071 match(Set dst (OrI dst (LoadI src)));
9072 effect(KILL cr);
9074 ins_cost(125);
9075 format %{ "OR $dst,$src" %}
9076 opcode(0x0B);
9077 ins_encode( OpcP, RegMem( dst, src) );
9078 ins_pipe( ialu_reg_mem );
9079 %}
9081 // Or Memory with Register
9082 instruct orI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9083 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9084 effect(KILL cr);
9086 ins_cost(150);
9087 format %{ "OR $dst,$src" %}
9088 opcode(0x09); /* Opcode 09 /r */
9089 ins_encode( OpcP, RegMem( src, dst ) );
9090 ins_pipe( ialu_mem_reg );
9091 %}
9093 // Or Memory with Immediate
9094 instruct orI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9095 match(Set dst (StoreI dst (OrI (LoadI dst) src)));
9096 effect(KILL cr);
9098 ins_cost(125);
9099 format %{ "OR $dst,$src" %}
9100 opcode(0x81,0x1); /* Opcode 81 /1 id */
9101 // ins_encode( MemImm( dst, src) );
9102 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9103 ins_pipe( ialu_mem_imm );
9104 %}
9106 // ROL/ROR
9107 // ROL expand
9108 instruct rolI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9109 effect(USE_DEF dst, USE shift, KILL cr);
9111 format %{ "ROL $dst, $shift" %}
9112 opcode(0xD1, 0x0); /* Opcode D1 /0 */
9113 ins_encode( OpcP, RegOpc( dst ));
9114 ins_pipe( ialu_reg );
9115 %}
9117 instruct rolI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9118 effect(USE_DEF dst, USE shift, KILL cr);
9120 format %{ "ROL $dst, $shift" %}
9121 opcode(0xC1, 0x0); /*Opcode /C1 /0 */
9122 ins_encode( RegOpcImm(dst, shift) );
9123 ins_pipe(ialu_reg);
9124 %}
9126 instruct rolI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr) %{
9127 effect(USE_DEF dst, USE shift, KILL cr);
9129 format %{ "ROL $dst, $shift" %}
9130 opcode(0xD3, 0x0); /* Opcode D3 /0 */
9131 ins_encode(OpcP, RegOpc(dst));
9132 ins_pipe( ialu_reg_reg );
9133 %}
9134 // end of ROL expand
9136 // ROL 32bit by one once
9137 instruct rolI_eReg_i1(eRegI dst, immI1 lshift, immI_M1 rshift, eFlagsReg cr) %{
9138 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9140 expand %{
9141 rolI_eReg_imm1(dst, lshift, cr);
9142 %}
9143 %}
9145 // ROL 32bit var by imm8 once
9146 instruct rolI_eReg_i8(eRegI dst, immI8 lshift, immI8 rshift, eFlagsReg cr) %{
9147 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9148 match(Set dst ( OrI (LShiftI dst lshift) (URShiftI dst rshift)));
9150 expand %{
9151 rolI_eReg_imm8(dst, lshift, cr);
9152 %}
9153 %}
9155 // ROL 32bit var by var once
9156 instruct rolI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9157 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI zero shift))));
9159 expand %{
9160 rolI_eReg_CL(dst, shift, cr);
9161 %}
9162 %}
9164 // ROL 32bit var by var once
9165 instruct rolI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9166 match(Set dst ( OrI (LShiftI dst shift) (URShiftI dst (SubI c32 shift))));
9168 expand %{
9169 rolI_eReg_CL(dst, shift, cr);
9170 %}
9171 %}
9173 // ROR expand
9174 instruct rorI_eReg_imm1(eRegI dst, immI1 shift, eFlagsReg cr) %{
9175 effect(USE_DEF dst, USE shift, KILL cr);
9177 format %{ "ROR $dst, $shift" %}
9178 opcode(0xD1,0x1); /* Opcode D1 /1 */
9179 ins_encode( OpcP, RegOpc( dst ) );
9180 ins_pipe( ialu_reg );
9181 %}
9183 instruct rorI_eReg_imm8(eRegI dst, immI8 shift, eFlagsReg cr) %{
9184 effect (USE_DEF dst, USE shift, KILL cr);
9186 format %{ "ROR $dst, $shift" %}
9187 opcode(0xC1, 0x1); /* Opcode /C1 /1 ib */
9188 ins_encode( RegOpcImm(dst, shift) );
9189 ins_pipe( ialu_reg );
9190 %}
9192 instruct rorI_eReg_CL(ncxRegI dst, eCXRegI shift, eFlagsReg cr)%{
9193 effect(USE_DEF dst, USE shift, KILL cr);
9195 format %{ "ROR $dst, $shift" %}
9196 opcode(0xD3, 0x1); /* Opcode D3 /1 */
9197 ins_encode(OpcP, RegOpc(dst));
9198 ins_pipe( ialu_reg_reg );
9199 %}
9200 // end of ROR expand
9202 // ROR right once
9203 instruct rorI_eReg_i1(eRegI dst, immI1 rshift, immI_M1 lshift, eFlagsReg cr) %{
9204 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9206 expand %{
9207 rorI_eReg_imm1(dst, rshift, cr);
9208 %}
9209 %}
9211 // ROR 32bit by immI8 once
9212 instruct rorI_eReg_i8(eRegI dst, immI8 rshift, immI8 lshift, eFlagsReg cr) %{
9213 predicate( 0 == ((n->in(1)->in(2)->get_int() + n->in(2)->in(2)->get_int()) & 0x1f));
9214 match(Set dst ( OrI (URShiftI dst rshift) (LShiftI dst lshift)));
9216 expand %{
9217 rorI_eReg_imm8(dst, rshift, cr);
9218 %}
9219 %}
9221 // ROR 32bit var by var once
9222 instruct rorI_eReg_Var_C0(ncxRegI dst, eCXRegI shift, immI0 zero, eFlagsReg cr) %{
9223 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI zero shift))));
9225 expand %{
9226 rorI_eReg_CL(dst, shift, cr);
9227 %}
9228 %}
9230 // ROR 32bit var by var once
9231 instruct rorI_eReg_Var_C32(ncxRegI dst, eCXRegI shift, immI_32 c32, eFlagsReg cr) %{
9232 match(Set dst ( OrI (URShiftI dst shift) (LShiftI dst (SubI c32 shift))));
9234 expand %{
9235 rorI_eReg_CL(dst, shift, cr);
9236 %}
9237 %}
9239 // Xor Instructions
9240 // Xor Register with Register
9241 instruct xorI_eReg(eRegI dst, eRegI src, eFlagsReg cr) %{
9242 match(Set dst (XorI dst src));
9243 effect(KILL cr);
9245 size(2);
9246 format %{ "XOR $dst,$src" %}
9247 opcode(0x33);
9248 ins_encode( OpcP, RegReg( dst, src) );
9249 ins_pipe( ialu_reg_reg );
9250 %}
9252 // Xor Register with Immediate -1
9253 instruct xorI_eReg_im1(eRegI dst, immI_M1 imm) %{
9254 match(Set dst (XorI dst imm));
9256 size(2);
9257 format %{ "NOT $dst" %}
9258 ins_encode %{
9259 __ notl($dst$$Register);
9260 %}
9261 ins_pipe( ialu_reg );
9262 %}
9264 // Xor Register with Immediate
9265 instruct xorI_eReg_imm(eRegI dst, immI src, eFlagsReg cr) %{
9266 match(Set dst (XorI dst src));
9267 effect(KILL cr);
9269 format %{ "XOR $dst,$src" %}
9270 opcode(0x81,0x06); /* Opcode 81 /6 id */
9271 // ins_encode( RegImm( dst, src) );
9272 ins_encode( OpcSErm( dst, src ), Con8or32( src ) );
9273 ins_pipe( ialu_reg );
9274 %}
9276 // Xor Register with Memory
9277 instruct xorI_eReg_mem(eRegI dst, memory src, eFlagsReg cr) %{
9278 match(Set dst (XorI dst (LoadI src)));
9279 effect(KILL cr);
9281 ins_cost(125);
9282 format %{ "XOR $dst,$src" %}
9283 opcode(0x33);
9284 ins_encode( OpcP, RegMem(dst, src) );
9285 ins_pipe( ialu_reg_mem );
9286 %}
9288 // Xor Memory with Register
9289 instruct xorI_mem_eReg(memory dst, eRegI src, eFlagsReg cr) %{
9290 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9291 effect(KILL cr);
9293 ins_cost(150);
9294 format %{ "XOR $dst,$src" %}
9295 opcode(0x31); /* Opcode 31 /r */
9296 ins_encode( OpcP, RegMem( src, dst ) );
9297 ins_pipe( ialu_mem_reg );
9298 %}
9300 // Xor Memory with Immediate
9301 instruct xorI_mem_imm(memory dst, immI src, eFlagsReg cr) %{
9302 match(Set dst (StoreI dst (XorI (LoadI dst) src)));
9303 effect(KILL cr);
9305 ins_cost(125);
9306 format %{ "XOR $dst,$src" %}
9307 opcode(0x81,0x6); /* Opcode 81 /6 id */
9308 ins_encode( OpcSE( src ), RMopc_Mem(secondary, dst ), Con8or32( src ) );
9309 ins_pipe( ialu_mem_imm );
9310 %}
9312 //----------Convert Int to Boolean---------------------------------------------
9314 instruct movI_nocopy(eRegI dst, eRegI src) %{
9315 effect( DEF dst, USE src );
9316 format %{ "MOV $dst,$src" %}
9317 ins_encode( enc_Copy( dst, src) );
9318 ins_pipe( ialu_reg_reg );
9319 %}
9321 instruct ci2b( eRegI dst, eRegI src, eFlagsReg cr ) %{
9322 effect( USE_DEF dst, USE src, KILL cr );
9324 size(4);
9325 format %{ "NEG $dst\n\t"
9326 "ADC $dst,$src" %}
9327 ins_encode( neg_reg(dst),
9328 OpcRegReg(0x13,dst,src) );
9329 ins_pipe( ialu_reg_reg_long );
9330 %}
9332 instruct convI2B( eRegI dst, eRegI src, eFlagsReg cr ) %{
9333 match(Set dst (Conv2B src));
9335 expand %{
9336 movI_nocopy(dst,src);
9337 ci2b(dst,src,cr);
9338 %}
9339 %}
9341 instruct movP_nocopy(eRegI dst, eRegP src) %{
9342 effect( DEF dst, USE src );
9343 format %{ "MOV $dst,$src" %}
9344 ins_encode( enc_Copy( dst, src) );
9345 ins_pipe( ialu_reg_reg );
9346 %}
9348 instruct cp2b( eRegI dst, eRegP src, eFlagsReg cr ) %{
9349 effect( USE_DEF dst, USE src, KILL cr );
9350 format %{ "NEG $dst\n\t"
9351 "ADC $dst,$src" %}
9352 ins_encode( neg_reg(dst),
9353 OpcRegReg(0x13,dst,src) );
9354 ins_pipe( ialu_reg_reg_long );
9355 %}
9357 instruct convP2B( eRegI dst, eRegP src, eFlagsReg cr ) %{
9358 match(Set dst (Conv2B src));
9360 expand %{
9361 movP_nocopy(dst,src);
9362 cp2b(dst,src,cr);
9363 %}
9364 %}
9366 instruct cmpLTMask( eCXRegI dst, ncxRegI p, ncxRegI q, eFlagsReg cr ) %{
9367 match(Set dst (CmpLTMask p q));
9368 effect( KILL cr );
9369 ins_cost(400);
9371 // SETlt can only use low byte of EAX,EBX, ECX, or EDX as destination
9372 format %{ "XOR $dst,$dst\n\t"
9373 "CMP $p,$q\n\t"
9374 "SETlt $dst\n\t"
9375 "NEG $dst" %}
9376 ins_encode( OpcRegReg(0x33,dst,dst),
9377 OpcRegReg(0x3B,p,q),
9378 setLT_reg(dst), neg_reg(dst) );
9379 ins_pipe( pipe_slow );
9380 %}
9382 instruct cmpLTMask0( eRegI dst, immI0 zero, eFlagsReg cr ) %{
9383 match(Set dst (CmpLTMask dst zero));
9384 effect( DEF dst, KILL cr );
9385 ins_cost(100);
9387 format %{ "SAR $dst,31" %}
9388 opcode(0xC1, 0x7); /* C1 /7 ib */
9389 ins_encode( RegOpcImm( dst, 0x1F ) );
9390 ins_pipe( ialu_reg );
9391 %}
9394 instruct cadd_cmpLTMask( ncxRegI p, ncxRegI q, ncxRegI y, eCXRegI tmp, eFlagsReg cr ) %{
9395 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q)));
9396 effect( KILL tmp, KILL cr );
9397 ins_cost(400);
9398 // annoyingly, $tmp has no edges so you cant ask for it in
9399 // any format or encoding
9400 format %{ "SUB $p,$q\n\t"
9401 "SBB ECX,ECX\n\t"
9402 "AND ECX,$y\n\t"
9403 "ADD $p,ECX" %}
9404 ins_encode( enc_cmpLTP(p,q,y,tmp) );
9405 ins_pipe( pipe_cmplt );
9406 %}
9408 /* If I enable this, I encourage spilling in the inner loop of compress.
9409 instruct cadd_cmpLTMask_mem( ncxRegI p, ncxRegI q, memory y, eCXRegI tmp, eFlagsReg cr ) %{
9410 match(Set p (AddI (AndI (CmpLTMask p q) (LoadI y)) (SubI p q)));
9411 effect( USE_KILL tmp, KILL cr );
9412 ins_cost(400);
9414 format %{ "SUB $p,$q\n\t"
9415 "SBB ECX,ECX\n\t"
9416 "AND ECX,$y\n\t"
9417 "ADD $p,ECX" %}
9418 ins_encode( enc_cmpLTP_mem(p,q,y,tmp) );
9419 %}
9420 */
9422 //----------Long Instructions------------------------------------------------
9423 // Add Long Register with Register
9424 instruct addL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9425 match(Set dst (AddL dst src));
9426 effect(KILL cr);
9427 ins_cost(200);
9428 format %{ "ADD $dst.lo,$src.lo\n\t"
9429 "ADC $dst.hi,$src.hi" %}
9430 opcode(0x03, 0x13);
9431 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9432 ins_pipe( ialu_reg_reg_long );
9433 %}
9435 // Add Long Register with Immediate
9436 instruct addL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9437 match(Set dst (AddL dst src));
9438 effect(KILL cr);
9439 format %{ "ADD $dst.lo,$src.lo\n\t"
9440 "ADC $dst.hi,$src.hi" %}
9441 opcode(0x81,0x00,0x02); /* Opcode 81 /0, 81 /2 */
9442 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9443 ins_pipe( ialu_reg_long );
9444 %}
9446 // Add Long Register with Memory
9447 instruct addL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9448 match(Set dst (AddL dst (LoadL mem)));
9449 effect(KILL cr);
9450 ins_cost(125);
9451 format %{ "ADD $dst.lo,$mem\n\t"
9452 "ADC $dst.hi,$mem+4" %}
9453 opcode(0x03, 0x13);
9454 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9455 ins_pipe( ialu_reg_long_mem );
9456 %}
9458 // Subtract Long Register with Register.
9459 instruct subL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9460 match(Set dst (SubL dst src));
9461 effect(KILL cr);
9462 ins_cost(200);
9463 format %{ "SUB $dst.lo,$src.lo\n\t"
9464 "SBB $dst.hi,$src.hi" %}
9465 opcode(0x2B, 0x1B);
9466 ins_encode( RegReg_Lo(dst, src), RegReg_Hi(dst,src) );
9467 ins_pipe( ialu_reg_reg_long );
9468 %}
9470 // Subtract Long Register with Immediate
9471 instruct subL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9472 match(Set dst (SubL dst src));
9473 effect(KILL cr);
9474 format %{ "SUB $dst.lo,$src.lo\n\t"
9475 "SBB $dst.hi,$src.hi" %}
9476 opcode(0x81,0x05,0x03); /* Opcode 81 /5, 81 /3 */
9477 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9478 ins_pipe( ialu_reg_long );
9479 %}
9481 // Subtract Long Register with Memory
9482 instruct subL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9483 match(Set dst (SubL dst (LoadL mem)));
9484 effect(KILL cr);
9485 ins_cost(125);
9486 format %{ "SUB $dst.lo,$mem\n\t"
9487 "SBB $dst.hi,$mem+4" %}
9488 opcode(0x2B, 0x1B);
9489 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9490 ins_pipe( ialu_reg_long_mem );
9491 %}
9493 instruct negL_eReg(eRegL dst, immL0 zero, eFlagsReg cr) %{
9494 match(Set dst (SubL zero dst));
9495 effect(KILL cr);
9496 ins_cost(300);
9497 format %{ "NEG $dst.hi\n\tNEG $dst.lo\n\tSBB $dst.hi,0" %}
9498 ins_encode( neg_long(dst) );
9499 ins_pipe( ialu_reg_reg_long );
9500 %}
9502 // And Long Register with Register
9503 instruct andL_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9504 match(Set dst (AndL dst src));
9505 effect(KILL cr);
9506 format %{ "AND $dst.lo,$src.lo\n\t"
9507 "AND $dst.hi,$src.hi" %}
9508 opcode(0x23,0x23);
9509 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9510 ins_pipe( ialu_reg_reg_long );
9511 %}
9513 // And Long Register with Immediate
9514 instruct andL_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9515 match(Set dst (AndL dst src));
9516 effect(KILL cr);
9517 format %{ "AND $dst.lo,$src.lo\n\t"
9518 "AND $dst.hi,$src.hi" %}
9519 opcode(0x81,0x04,0x04); /* Opcode 81 /4, 81 /4 */
9520 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9521 ins_pipe( ialu_reg_long );
9522 %}
9524 // And Long Register with Memory
9525 instruct andL_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9526 match(Set dst (AndL dst (LoadL mem)));
9527 effect(KILL cr);
9528 ins_cost(125);
9529 format %{ "AND $dst.lo,$mem\n\t"
9530 "AND $dst.hi,$mem+4" %}
9531 opcode(0x23, 0x23);
9532 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9533 ins_pipe( ialu_reg_long_mem );
9534 %}
9536 // Or Long Register with Register
9537 instruct orl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9538 match(Set dst (OrL dst src));
9539 effect(KILL cr);
9540 format %{ "OR $dst.lo,$src.lo\n\t"
9541 "OR $dst.hi,$src.hi" %}
9542 opcode(0x0B,0x0B);
9543 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9544 ins_pipe( ialu_reg_reg_long );
9545 %}
9547 // Or Long Register with Immediate
9548 instruct orl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9549 match(Set dst (OrL dst src));
9550 effect(KILL cr);
9551 format %{ "OR $dst.lo,$src.lo\n\t"
9552 "OR $dst.hi,$src.hi" %}
9553 opcode(0x81,0x01,0x01); /* Opcode 81 /1, 81 /1 */
9554 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9555 ins_pipe( ialu_reg_long );
9556 %}
9558 // Or Long Register with Memory
9559 instruct orl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9560 match(Set dst (OrL dst (LoadL mem)));
9561 effect(KILL cr);
9562 ins_cost(125);
9563 format %{ "OR $dst.lo,$mem\n\t"
9564 "OR $dst.hi,$mem+4" %}
9565 opcode(0x0B,0x0B);
9566 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9567 ins_pipe( ialu_reg_long_mem );
9568 %}
9570 // Xor Long Register with Register
9571 instruct xorl_eReg(eRegL dst, eRegL src, eFlagsReg cr) %{
9572 match(Set dst (XorL dst src));
9573 effect(KILL cr);
9574 format %{ "XOR $dst.lo,$src.lo\n\t"
9575 "XOR $dst.hi,$src.hi" %}
9576 opcode(0x33,0x33);
9577 ins_encode( RegReg_Lo( dst, src), RegReg_Hi( dst, src) );
9578 ins_pipe( ialu_reg_reg_long );
9579 %}
9581 // Xor Long Register with Immediate -1
9582 instruct xorl_eReg_im1(eRegL dst, immL_M1 imm) %{
9583 match(Set dst (XorL dst imm));
9584 format %{ "NOT $dst.lo\n\t"
9585 "NOT $dst.hi" %}
9586 ins_encode %{
9587 __ notl($dst$$Register);
9588 __ notl(HIGH_FROM_LOW($dst$$Register));
9589 %}
9590 ins_pipe( ialu_reg_long );
9591 %}
9593 // Xor Long Register with Immediate
9594 instruct xorl_eReg_imm(eRegL dst, immL src, eFlagsReg cr) %{
9595 match(Set dst (XorL dst src));
9596 effect(KILL cr);
9597 format %{ "XOR $dst.lo,$src.lo\n\t"
9598 "XOR $dst.hi,$src.hi" %}
9599 opcode(0x81,0x06,0x06); /* Opcode 81 /6, 81 /6 */
9600 ins_encode( Long_OpcSErm_Lo( dst, src ), Long_OpcSErm_Hi( dst, src ) );
9601 ins_pipe( ialu_reg_long );
9602 %}
9604 // Xor Long Register with Memory
9605 instruct xorl_eReg_mem(eRegL dst, load_long_memory mem, eFlagsReg cr) %{
9606 match(Set dst (XorL dst (LoadL mem)));
9607 effect(KILL cr);
9608 ins_cost(125);
9609 format %{ "XOR $dst.lo,$mem\n\t"
9610 "XOR $dst.hi,$mem+4" %}
9611 opcode(0x33,0x33);
9612 ins_encode( OpcP, RegMem( dst, mem), OpcS, RegMem_Hi(dst,mem) );
9613 ins_pipe( ialu_reg_long_mem );
9614 %}
9616 // Shift Left Long by 1
9617 instruct shlL_eReg_1(eRegL dst, immI_1 cnt, eFlagsReg cr) %{
9618 predicate(UseNewLongLShift);
9619 match(Set dst (LShiftL dst cnt));
9620 effect(KILL cr);
9621 ins_cost(100);
9622 format %{ "ADD $dst.lo,$dst.lo\n\t"
9623 "ADC $dst.hi,$dst.hi" %}
9624 ins_encode %{
9625 __ addl($dst$$Register,$dst$$Register);
9626 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9627 %}
9628 ins_pipe( ialu_reg_long );
9629 %}
9631 // Shift Left Long by 2
9632 instruct shlL_eReg_2(eRegL dst, immI_2 cnt, eFlagsReg cr) %{
9633 predicate(UseNewLongLShift);
9634 match(Set dst (LShiftL dst cnt));
9635 effect(KILL cr);
9636 ins_cost(100);
9637 format %{ "ADD $dst.lo,$dst.lo\n\t"
9638 "ADC $dst.hi,$dst.hi\n\t"
9639 "ADD $dst.lo,$dst.lo\n\t"
9640 "ADC $dst.hi,$dst.hi" %}
9641 ins_encode %{
9642 __ addl($dst$$Register,$dst$$Register);
9643 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9644 __ addl($dst$$Register,$dst$$Register);
9645 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9646 %}
9647 ins_pipe( ialu_reg_long );
9648 %}
9650 // Shift Left Long by 3
9651 instruct shlL_eReg_3(eRegL dst, immI_3 cnt, eFlagsReg cr) %{
9652 predicate(UseNewLongLShift);
9653 match(Set dst (LShiftL dst cnt));
9654 effect(KILL cr);
9655 ins_cost(100);
9656 format %{ "ADD $dst.lo,$dst.lo\n\t"
9657 "ADC $dst.hi,$dst.hi\n\t"
9658 "ADD $dst.lo,$dst.lo\n\t"
9659 "ADC $dst.hi,$dst.hi\n\t"
9660 "ADD $dst.lo,$dst.lo\n\t"
9661 "ADC $dst.hi,$dst.hi" %}
9662 ins_encode %{
9663 __ addl($dst$$Register,$dst$$Register);
9664 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9665 __ addl($dst$$Register,$dst$$Register);
9666 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9667 __ addl($dst$$Register,$dst$$Register);
9668 __ adcl(HIGH_FROM_LOW($dst$$Register),HIGH_FROM_LOW($dst$$Register));
9669 %}
9670 ins_pipe( ialu_reg_long );
9671 %}
9673 // Shift Left Long by 1-31
9674 instruct shlL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9675 match(Set dst (LShiftL dst cnt));
9676 effect(KILL cr);
9677 ins_cost(200);
9678 format %{ "SHLD $dst.hi,$dst.lo,$cnt\n\t"
9679 "SHL $dst.lo,$cnt" %}
9680 opcode(0xC1, 0x4, 0xA4); /* 0F/A4, then C1 /4 ib */
9681 ins_encode( move_long_small_shift(dst,cnt) );
9682 ins_pipe( ialu_reg_long );
9683 %}
9685 // Shift Left Long by 32-63
9686 instruct shlL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9687 match(Set dst (LShiftL dst cnt));
9688 effect(KILL cr);
9689 ins_cost(300);
9690 format %{ "MOV $dst.hi,$dst.lo\n"
9691 "\tSHL $dst.hi,$cnt-32\n"
9692 "\tXOR $dst.lo,$dst.lo" %}
9693 opcode(0xC1, 0x4); /* C1 /4 ib */
9694 ins_encode( move_long_big_shift_clr(dst,cnt) );
9695 ins_pipe( ialu_reg_long );
9696 %}
9698 // Shift Left Long by variable
9699 instruct salL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9700 match(Set dst (LShiftL dst shift));
9701 effect(KILL cr);
9702 ins_cost(500+200);
9703 size(17);
9704 format %{ "TEST $shift,32\n\t"
9705 "JEQ,s small\n\t"
9706 "MOV $dst.hi,$dst.lo\n\t"
9707 "XOR $dst.lo,$dst.lo\n"
9708 "small:\tSHLD $dst.hi,$dst.lo,$shift\n\t"
9709 "SHL $dst.lo,$shift" %}
9710 ins_encode( shift_left_long( dst, shift ) );
9711 ins_pipe( pipe_slow );
9712 %}
9714 // Shift Right Long by 1-31
9715 instruct shrL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9716 match(Set dst (URShiftL dst cnt));
9717 effect(KILL cr);
9718 ins_cost(200);
9719 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9720 "SHR $dst.hi,$cnt" %}
9721 opcode(0xC1, 0x5, 0xAC); /* 0F/AC, then C1 /5 ib */
9722 ins_encode( move_long_small_shift(dst,cnt) );
9723 ins_pipe( ialu_reg_long );
9724 %}
9726 // Shift Right Long by 32-63
9727 instruct shrL_eReg_32_63(eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9728 match(Set dst (URShiftL dst cnt));
9729 effect(KILL cr);
9730 ins_cost(300);
9731 format %{ "MOV $dst.lo,$dst.hi\n"
9732 "\tSHR $dst.lo,$cnt-32\n"
9733 "\tXOR $dst.hi,$dst.hi" %}
9734 opcode(0xC1, 0x5); /* C1 /5 ib */
9735 ins_encode( move_long_big_shift_clr(dst,cnt) );
9736 ins_pipe( ialu_reg_long );
9737 %}
9739 // Shift Right Long by variable
9740 instruct shrL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9741 match(Set dst (URShiftL dst shift));
9742 effect(KILL cr);
9743 ins_cost(600);
9744 size(17);
9745 format %{ "TEST $shift,32\n\t"
9746 "JEQ,s small\n\t"
9747 "MOV $dst.lo,$dst.hi\n\t"
9748 "XOR $dst.hi,$dst.hi\n"
9749 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9750 "SHR $dst.hi,$shift" %}
9751 ins_encode( shift_right_long( dst, shift ) );
9752 ins_pipe( pipe_slow );
9753 %}
9755 // Shift Right Long by 1-31
9756 instruct sarL_eReg_1_31(eRegL dst, immI_1_31 cnt, eFlagsReg cr) %{
9757 match(Set dst (RShiftL dst cnt));
9758 effect(KILL cr);
9759 ins_cost(200);
9760 format %{ "SHRD $dst.lo,$dst.hi,$cnt\n\t"
9761 "SAR $dst.hi,$cnt" %}
9762 opcode(0xC1, 0x7, 0xAC); /* 0F/AC, then C1 /7 ib */
9763 ins_encode( move_long_small_shift(dst,cnt) );
9764 ins_pipe( ialu_reg_long );
9765 %}
9767 // Shift Right Long by 32-63
9768 instruct sarL_eReg_32_63( eRegL dst, immI_32_63 cnt, eFlagsReg cr) %{
9769 match(Set dst (RShiftL dst cnt));
9770 effect(KILL cr);
9771 ins_cost(300);
9772 format %{ "MOV $dst.lo,$dst.hi\n"
9773 "\tSAR $dst.lo,$cnt-32\n"
9774 "\tSAR $dst.hi,31" %}
9775 opcode(0xC1, 0x7); /* C1 /7 ib */
9776 ins_encode( move_long_big_shift_sign(dst,cnt) );
9777 ins_pipe( ialu_reg_long );
9778 %}
9780 // Shift Right arithmetic Long by variable
9781 instruct sarL_eReg_CL(eRegL dst, eCXRegI shift, eFlagsReg cr) %{
9782 match(Set dst (RShiftL dst shift));
9783 effect(KILL cr);
9784 ins_cost(600);
9785 size(18);
9786 format %{ "TEST $shift,32\n\t"
9787 "JEQ,s small\n\t"
9788 "MOV $dst.lo,$dst.hi\n\t"
9789 "SAR $dst.hi,31\n"
9790 "small:\tSHRD $dst.lo,$dst.hi,$shift\n\t"
9791 "SAR $dst.hi,$shift" %}
9792 ins_encode( shift_right_arith_long( dst, shift ) );
9793 ins_pipe( pipe_slow );
9794 %}
9797 //----------Double Instructions------------------------------------------------
9798 // Double Math
9800 // Compare & branch
9802 // P6 version of float compare, sets condition codes in EFLAGS
9803 instruct cmpD_cc_P6(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
9804 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9805 match(Set cr (CmpD src1 src2));
9806 effect(KILL rax);
9807 ins_cost(150);
9808 format %{ "FLD $src1\n\t"
9809 "FUCOMIP ST,$src2 // P6 instruction\n\t"
9810 "JNP exit\n\t"
9811 "MOV ah,1 // saw a NaN, set CF\n\t"
9812 "SAHF\n"
9813 "exit:\tNOP // avoid branch to branch" %}
9814 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9815 ins_encode( Push_Reg_D(src1),
9816 OpcP, RegOpc(src2),
9817 cmpF_P6_fixup );
9818 ins_pipe( pipe_slow );
9819 %}
9821 instruct cmpD_cc_P6CF(eFlagsRegUCF cr, regD src1, regD src2) %{
9822 predicate(VM_Version::supports_cmov() && UseSSE <=1);
9823 match(Set cr (CmpD src1 src2));
9824 ins_cost(150);
9825 format %{ "FLD $src1\n\t"
9826 "FUCOMIP ST,$src2 // P6 instruction" %}
9827 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
9828 ins_encode( Push_Reg_D(src1),
9829 OpcP, RegOpc(src2));
9830 ins_pipe( pipe_slow );
9831 %}
9833 // Compare & branch
9834 instruct cmpD_cc(eFlagsRegU cr, regD src1, regD src2, eAXRegI rax) %{
9835 predicate(UseSSE<=1);
9836 match(Set cr (CmpD src1 src2));
9837 effect(KILL rax);
9838 ins_cost(200);
9839 format %{ "FLD $src1\n\t"
9840 "FCOMp $src2\n\t"
9841 "FNSTSW AX\n\t"
9842 "TEST AX,0x400\n\t"
9843 "JZ,s flags\n\t"
9844 "MOV AH,1\t# unordered treat as LT\n"
9845 "flags:\tSAHF" %}
9846 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9847 ins_encode( Push_Reg_D(src1),
9848 OpcP, RegOpc(src2),
9849 fpu_flags);
9850 ins_pipe( pipe_slow );
9851 %}
9853 // Compare vs zero into -1,0,1
9854 instruct cmpD_0(eRegI dst, regD src1, immD0 zero, eAXRegI rax, eFlagsReg cr) %{
9855 predicate(UseSSE<=1);
9856 match(Set dst (CmpD3 src1 zero));
9857 effect(KILL cr, KILL rax);
9858 ins_cost(280);
9859 format %{ "FTSTD $dst,$src1" %}
9860 opcode(0xE4, 0xD9);
9861 ins_encode( Push_Reg_D(src1),
9862 OpcS, OpcP, PopFPU,
9863 CmpF_Result(dst));
9864 ins_pipe( pipe_slow );
9865 %}
9867 // Compare into -1,0,1
9868 instruct cmpD_reg(eRegI dst, regD src1, regD src2, eAXRegI rax, eFlagsReg cr) %{
9869 predicate(UseSSE<=1);
9870 match(Set dst (CmpD3 src1 src2));
9871 effect(KILL cr, KILL rax);
9872 ins_cost(300);
9873 format %{ "FCMPD $dst,$src1,$src2" %}
9874 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
9875 ins_encode( Push_Reg_D(src1),
9876 OpcP, RegOpc(src2),
9877 CmpF_Result(dst));
9878 ins_pipe( pipe_slow );
9879 %}
9881 // float compare and set condition codes in EFLAGS by XMM regs
9882 instruct cmpXD_cc(eFlagsRegU cr, regXD dst, regXD src, eAXRegI rax) %{
9883 predicate(UseSSE>=2);
9884 match(Set cr (CmpD dst src));
9885 effect(KILL rax);
9886 ins_cost(125);
9887 format %{ "COMISD $dst,$src\n"
9888 "\tJNP exit\n"
9889 "\tMOV ah,1 // saw a NaN, set CF\n"
9890 "\tSAHF\n"
9891 "exit:\tNOP // avoid branch to branch" %}
9892 opcode(0x66, 0x0F, 0x2F);
9893 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src), cmpF_P6_fixup);
9894 ins_pipe( pipe_slow );
9895 %}
9897 instruct cmpXD_ccCF(eFlagsRegUCF cr, regXD dst, regXD src) %{
9898 predicate(UseSSE>=2);
9899 match(Set cr (CmpD dst src));
9900 ins_cost(100);
9901 format %{ "COMISD $dst,$src" %}
9902 opcode(0x66, 0x0F, 0x2F);
9903 ins_encode(OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
9904 ins_pipe( pipe_slow );
9905 %}
9907 // float compare and set condition codes in EFLAGS by XMM regs
9908 instruct cmpXD_ccmem(eFlagsRegU cr, regXD dst, memory src, eAXRegI rax) %{
9909 predicate(UseSSE>=2);
9910 match(Set cr (CmpD dst (LoadD src)));
9911 effect(KILL rax);
9912 ins_cost(145);
9913 format %{ "COMISD $dst,$src\n"
9914 "\tJNP exit\n"
9915 "\tMOV ah,1 // saw a NaN, set CF\n"
9916 "\tSAHF\n"
9917 "exit:\tNOP // avoid branch to branch" %}
9918 opcode(0x66, 0x0F, 0x2F);
9919 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src), cmpF_P6_fixup);
9920 ins_pipe( pipe_slow );
9921 %}
9923 instruct cmpXD_ccmemCF(eFlagsRegUCF cr, regXD dst, memory src) %{
9924 predicate(UseSSE>=2);
9925 match(Set cr (CmpD dst (LoadD src)));
9926 ins_cost(100);
9927 format %{ "COMISD $dst,$src" %}
9928 opcode(0x66, 0x0F, 0x2F);
9929 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(dst, src));
9930 ins_pipe( pipe_slow );
9931 %}
9933 // Compare into -1,0,1 in XMM
9934 instruct cmpXD_reg(eRegI dst, regXD src1, regXD src2, eFlagsReg cr) %{
9935 predicate(UseSSE>=2);
9936 match(Set dst (CmpD3 src1 src2));
9937 effect(KILL cr);
9938 ins_cost(255);
9939 format %{ "XOR $dst,$dst\n"
9940 "\tCOMISD $src1,$src2\n"
9941 "\tJP,s nan\n"
9942 "\tJEQ,s exit\n"
9943 "\tJA,s inc\n"
9944 "nan:\tDEC $dst\n"
9945 "\tJMP,s exit\n"
9946 "inc:\tINC $dst\n"
9947 "exit:"
9948 %}
9949 opcode(0x66, 0x0F, 0x2F);
9950 ins_encode(Xor_Reg(dst), OpcP, OpcS, Opcode(tertiary), RegReg(src1, src2),
9951 CmpX_Result(dst));
9952 ins_pipe( pipe_slow );
9953 %}
9955 // Compare into -1,0,1 in XMM and memory
9956 instruct cmpXD_regmem(eRegI dst, regXD src1, memory mem, eFlagsReg cr) %{
9957 predicate(UseSSE>=2);
9958 match(Set dst (CmpD3 src1 (LoadD mem)));
9959 effect(KILL cr);
9960 ins_cost(275);
9961 format %{ "COMISD $src1,$mem\n"
9962 "\tMOV $dst,0\t\t# do not blow flags\n"
9963 "\tJP,s nan\n"
9964 "\tJEQ,s exit\n"
9965 "\tJA,s inc\n"
9966 "nan:\tDEC $dst\n"
9967 "\tJMP,s exit\n"
9968 "inc:\tINC $dst\n"
9969 "exit:"
9970 %}
9971 opcode(0x66, 0x0F, 0x2F);
9972 ins_encode(OpcP, OpcS, Opcode(tertiary), RegMem(src1, mem),
9973 LdImmI(dst,0x0), CmpX_Result(dst));
9974 ins_pipe( pipe_slow );
9975 %}
9978 instruct subD_reg(regD dst, regD src) %{
9979 predicate (UseSSE <=1);
9980 match(Set dst (SubD dst src));
9982 format %{ "FLD $src\n\t"
9983 "DSUBp $dst,ST" %}
9984 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
9985 ins_cost(150);
9986 ins_encode( Push_Reg_D(src),
9987 OpcP, RegOpc(dst) );
9988 ins_pipe( fpu_reg_reg );
9989 %}
9991 instruct subD_reg_round(stackSlotD dst, regD src1, regD src2) %{
9992 predicate (UseSSE <=1);
9993 match(Set dst (RoundDouble (SubD src1 src2)));
9994 ins_cost(250);
9996 format %{ "FLD $src2\n\t"
9997 "DSUB ST,$src1\n\t"
9998 "FSTP_D $dst\t# D-round" %}
9999 opcode(0xD8, 0x5);
10000 ins_encode( Push_Reg_D(src2),
10001 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10002 ins_pipe( fpu_mem_reg_reg );
10003 %}
10006 instruct subD_reg_mem(regD dst, memory src) %{
10007 predicate (UseSSE <=1);
10008 match(Set dst (SubD dst (LoadD src)));
10009 ins_cost(150);
10011 format %{ "FLD $src\n\t"
10012 "DSUBp $dst,ST" %}
10013 opcode(0xDE, 0x5, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10014 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10015 OpcP, RegOpc(dst) );
10016 ins_pipe( fpu_reg_mem );
10017 %}
10019 instruct absD_reg(regDPR1 dst, regDPR1 src) %{
10020 predicate (UseSSE<=1);
10021 match(Set dst (AbsD src));
10022 ins_cost(100);
10023 format %{ "FABS" %}
10024 opcode(0xE1, 0xD9);
10025 ins_encode( OpcS, OpcP );
10026 ins_pipe( fpu_reg_reg );
10027 %}
10029 instruct absXD_reg( regXD dst ) %{
10030 predicate(UseSSE>=2);
10031 match(Set dst (AbsD dst));
10032 format %{ "ANDPD $dst,[0x7FFFFFFFFFFFFFFF]\t# ABS D by sign masking" %}
10033 ins_encode( AbsXD_encoding(dst));
10034 ins_pipe( pipe_slow );
10035 %}
10037 instruct negD_reg(regDPR1 dst, regDPR1 src) %{
10038 predicate(UseSSE<=1);
10039 match(Set dst (NegD src));
10040 ins_cost(100);
10041 format %{ "FCHS" %}
10042 opcode(0xE0, 0xD9);
10043 ins_encode( OpcS, OpcP );
10044 ins_pipe( fpu_reg_reg );
10045 %}
10047 instruct negXD_reg( regXD dst ) %{
10048 predicate(UseSSE>=2);
10049 match(Set dst (NegD dst));
10050 format %{ "XORPD $dst,[0x8000000000000000]\t# CHS D by sign flipping" %}
10051 ins_encode %{
10052 __ xorpd($dst$$XMMRegister,
10053 ExternalAddress((address)double_signflip_pool));
10054 %}
10055 ins_pipe( pipe_slow );
10056 %}
10058 instruct addD_reg(regD dst, regD src) %{
10059 predicate(UseSSE<=1);
10060 match(Set dst (AddD dst src));
10061 format %{ "FLD $src\n\t"
10062 "DADD $dst,ST" %}
10063 size(4);
10064 ins_cost(150);
10065 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
10066 ins_encode( Push_Reg_D(src),
10067 OpcP, RegOpc(dst) );
10068 ins_pipe( fpu_reg_reg );
10069 %}
10072 instruct addD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10073 predicate(UseSSE<=1);
10074 match(Set dst (RoundDouble (AddD src1 src2)));
10075 ins_cost(250);
10077 format %{ "FLD $src2\n\t"
10078 "DADD ST,$src1\n\t"
10079 "FSTP_D $dst\t# D-round" %}
10080 opcode(0xD8, 0x0); /* D8 C0+i or D8 /0*/
10081 ins_encode( Push_Reg_D(src2),
10082 OpcP, RegOpc(src1), Pop_Mem_D(dst) );
10083 ins_pipe( fpu_mem_reg_reg );
10084 %}
10087 instruct addD_reg_mem(regD dst, memory src) %{
10088 predicate(UseSSE<=1);
10089 match(Set dst (AddD dst (LoadD src)));
10090 ins_cost(150);
10092 format %{ "FLD $src\n\t"
10093 "DADDp $dst,ST" %}
10094 opcode(0xDE, 0x0, 0xDD); /* DE C0+i */ /* LoadD DD /0 */
10095 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10096 OpcP, RegOpc(dst) );
10097 ins_pipe( fpu_reg_mem );
10098 %}
10100 // add-to-memory
10101 instruct addD_mem_reg(memory dst, regD src) %{
10102 predicate(UseSSE<=1);
10103 match(Set dst (StoreD dst (RoundDouble (AddD (LoadD dst) src))));
10104 ins_cost(150);
10106 format %{ "FLD_D $dst\n\t"
10107 "DADD ST,$src\n\t"
10108 "FST_D $dst" %}
10109 opcode(0xDD, 0x0);
10110 ins_encode( Opcode(0xDD), RMopc_Mem(0x00,dst),
10111 Opcode(0xD8), RegOpc(src),
10112 set_instruction_start,
10113 Opcode(0xDD), RMopc_Mem(0x03,dst) );
10114 ins_pipe( fpu_reg_mem );
10115 %}
10117 instruct addD_reg_imm1(regD dst, immD1 src) %{
10118 predicate(UseSSE<=1);
10119 match(Set dst (AddD dst src));
10120 ins_cost(125);
10121 format %{ "FLD1\n\t"
10122 "DADDp $dst,ST" %}
10123 opcode(0xDE, 0x00);
10124 ins_encode( LdImmD(src),
10125 OpcP, RegOpc(dst) );
10126 ins_pipe( fpu_reg );
10127 %}
10129 instruct addD_reg_imm(regD dst, immD src) %{
10130 predicate(UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10131 match(Set dst (AddD dst src));
10132 ins_cost(200);
10133 format %{ "FLD_D [$src]\n\t"
10134 "DADDp $dst,ST" %}
10135 opcode(0xDE, 0x00); /* DE /0 */
10136 ins_encode( LdImmD(src),
10137 OpcP, RegOpc(dst));
10138 ins_pipe( fpu_reg_mem );
10139 %}
10141 instruct addD_reg_imm_round(stackSlotD dst, regD src, immD con) %{
10142 predicate(UseSSE<=1 && _kids[0]->_kids[1]->_leaf->getd() != 0.0 && _kids[0]->_kids[1]->_leaf->getd() != 1.0 );
10143 match(Set dst (RoundDouble (AddD src con)));
10144 ins_cost(200);
10145 format %{ "FLD_D [$con]\n\t"
10146 "DADD ST,$src\n\t"
10147 "FSTP_D $dst\t# D-round" %}
10148 opcode(0xD8, 0x00); /* D8 /0 */
10149 ins_encode( LdImmD(con),
10150 OpcP, RegOpc(src), Pop_Mem_D(dst));
10151 ins_pipe( fpu_mem_reg_con );
10152 %}
10154 // Add two double precision floating point values in xmm
10155 instruct addXD_reg(regXD dst, regXD src) %{
10156 predicate(UseSSE>=2);
10157 match(Set dst (AddD dst src));
10158 format %{ "ADDSD $dst,$src" %}
10159 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
10160 ins_pipe( pipe_slow );
10161 %}
10163 instruct addXD_imm(regXD dst, immXD con) %{
10164 predicate(UseSSE>=2);
10165 match(Set dst (AddD dst con));
10166 format %{ "ADDSD $dst,[$con]" %}
10167 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), LdImmXD(dst, con) );
10168 ins_pipe( pipe_slow );
10169 %}
10171 instruct addXD_mem(regXD dst, memory mem) %{
10172 predicate(UseSSE>=2);
10173 match(Set dst (AddD dst (LoadD mem)));
10174 format %{ "ADDSD $dst,$mem" %}
10175 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x58), RegMem(dst,mem));
10176 ins_pipe( pipe_slow );
10177 %}
10179 // Sub two double precision floating point values in xmm
10180 instruct subXD_reg(regXD dst, regXD src) %{
10181 predicate(UseSSE>=2);
10182 match(Set dst (SubD dst src));
10183 format %{ "SUBSD $dst,$src" %}
10184 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
10185 ins_pipe( pipe_slow );
10186 %}
10188 instruct subXD_imm(regXD dst, immXD con) %{
10189 predicate(UseSSE>=2);
10190 match(Set dst (SubD dst con));
10191 format %{ "SUBSD $dst,[$con]" %}
10192 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), LdImmXD(dst, con) );
10193 ins_pipe( pipe_slow );
10194 %}
10196 instruct subXD_mem(regXD dst, memory mem) %{
10197 predicate(UseSSE>=2);
10198 match(Set dst (SubD dst (LoadD mem)));
10199 format %{ "SUBSD $dst,$mem" %}
10200 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
10201 ins_pipe( pipe_slow );
10202 %}
10204 // Mul two double precision floating point values in xmm
10205 instruct mulXD_reg(regXD dst, regXD src) %{
10206 predicate(UseSSE>=2);
10207 match(Set dst (MulD dst src));
10208 format %{ "MULSD $dst,$src" %}
10209 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
10210 ins_pipe( pipe_slow );
10211 %}
10213 instruct mulXD_imm(regXD dst, immXD con) %{
10214 predicate(UseSSE>=2);
10215 match(Set dst (MulD dst con));
10216 format %{ "MULSD $dst,[$con]" %}
10217 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), LdImmXD(dst, con) );
10218 ins_pipe( pipe_slow );
10219 %}
10221 instruct mulXD_mem(regXD dst, memory mem) %{
10222 predicate(UseSSE>=2);
10223 match(Set dst (MulD dst (LoadD mem)));
10224 format %{ "MULSD $dst,$mem" %}
10225 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
10226 ins_pipe( pipe_slow );
10227 %}
10229 // Div two double precision floating point values in xmm
10230 instruct divXD_reg(regXD dst, regXD src) %{
10231 predicate(UseSSE>=2);
10232 match(Set dst (DivD dst src));
10233 format %{ "DIVSD $dst,$src" %}
10234 opcode(0xF2, 0x0F, 0x5E);
10235 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
10236 ins_pipe( pipe_slow );
10237 %}
10239 instruct divXD_imm(regXD dst, immXD con) %{
10240 predicate(UseSSE>=2);
10241 match(Set dst (DivD dst con));
10242 format %{ "DIVSD $dst,[$con]" %}
10243 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), LdImmXD(dst, con));
10244 ins_pipe( pipe_slow );
10245 %}
10247 instruct divXD_mem(regXD dst, memory mem) %{
10248 predicate(UseSSE>=2);
10249 match(Set dst (DivD dst (LoadD mem)));
10250 format %{ "DIVSD $dst,$mem" %}
10251 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
10252 ins_pipe( pipe_slow );
10253 %}
10256 instruct mulD_reg(regD dst, regD src) %{
10257 predicate(UseSSE<=1);
10258 match(Set dst (MulD dst src));
10259 format %{ "FLD $src\n\t"
10260 "DMULp $dst,ST" %}
10261 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10262 ins_cost(150);
10263 ins_encode( Push_Reg_D(src),
10264 OpcP, RegOpc(dst) );
10265 ins_pipe( fpu_reg_reg );
10266 %}
10268 // Strict FP instruction biases argument before multiply then
10269 // biases result to avoid double rounding of subnormals.
10270 //
10271 // scale arg1 by multiplying arg1 by 2^(-15360)
10272 // load arg2
10273 // multiply scaled arg1 by arg2
10274 // rescale product by 2^(15360)
10275 //
10276 instruct strictfp_mulD_reg(regDPR1 dst, regnotDPR1 src) %{
10277 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10278 match(Set dst (MulD dst src));
10279 ins_cost(1); // Select this instruction for all strict FP double multiplies
10281 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10282 "DMULp $dst,ST\n\t"
10283 "FLD $src\n\t"
10284 "DMULp $dst,ST\n\t"
10285 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10286 "DMULp $dst,ST\n\t" %}
10287 opcode(0xDE, 0x1); /* DE C8+i or DE /1*/
10288 ins_encode( strictfp_bias1(dst),
10289 Push_Reg_D(src),
10290 OpcP, RegOpc(dst),
10291 strictfp_bias2(dst) );
10292 ins_pipe( fpu_reg_reg );
10293 %}
10295 instruct mulD_reg_imm(regD dst, immD src) %{
10296 predicate( UseSSE<=1 && _kids[1]->_leaf->getd() != 0.0 && _kids[1]->_leaf->getd() != 1.0 );
10297 match(Set dst (MulD dst src));
10298 ins_cost(200);
10299 format %{ "FLD_D [$src]\n\t"
10300 "DMULp $dst,ST" %}
10301 opcode(0xDE, 0x1); /* DE /1 */
10302 ins_encode( LdImmD(src),
10303 OpcP, RegOpc(dst) );
10304 ins_pipe( fpu_reg_mem );
10305 %}
10308 instruct mulD_reg_mem(regD dst, memory src) %{
10309 predicate( UseSSE<=1 );
10310 match(Set dst (MulD dst (LoadD src)));
10311 ins_cost(200);
10312 format %{ "FLD_D $src\n\t"
10313 "DMULp $dst,ST" %}
10314 opcode(0xDE, 0x1, 0xDD); /* DE C8+i or DE /1*/ /* LoadD DD /0 */
10315 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
10316 OpcP, RegOpc(dst) );
10317 ins_pipe( fpu_reg_mem );
10318 %}
10320 //
10321 // Cisc-alternate to reg-reg multiply
10322 instruct mulD_reg_mem_cisc(regD dst, regD src, memory mem) %{
10323 predicate( UseSSE<=1 );
10324 match(Set dst (MulD src (LoadD mem)));
10325 ins_cost(250);
10326 format %{ "FLD_D $mem\n\t"
10327 "DMUL ST,$src\n\t"
10328 "FSTP_D $dst" %}
10329 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadD D9 /0 */
10330 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem),
10331 OpcReg_F(src),
10332 Pop_Reg_D(dst) );
10333 ins_pipe( fpu_reg_reg_mem );
10334 %}
10337 // MACRO3 -- addD a mulD
10338 // This instruction is a '2-address' instruction in that the result goes
10339 // back to src2. This eliminates a move from the macro; possibly the
10340 // register allocator will have to add it back (and maybe not).
10341 instruct addD_mulD_reg(regD src2, regD src1, regD src0) %{
10342 predicate( UseSSE<=1 );
10343 match(Set src2 (AddD (MulD src0 src1) src2));
10344 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10345 "DMUL ST,$src1\n\t"
10346 "DADDp $src2,ST" %}
10347 ins_cost(250);
10348 opcode(0xDD); /* LoadD DD /0 */
10349 ins_encode( Push_Reg_F(src0),
10350 FMul_ST_reg(src1),
10351 FAddP_reg_ST(src2) );
10352 ins_pipe( fpu_reg_reg_reg );
10353 %}
10356 // MACRO3 -- subD a mulD
10357 instruct subD_mulD_reg(regD src2, regD src1, regD src0) %{
10358 predicate( UseSSE<=1 );
10359 match(Set src2 (SubD (MulD src0 src1) src2));
10360 format %{ "FLD $src0\t# ===MACRO3d===\n\t"
10361 "DMUL ST,$src1\n\t"
10362 "DSUBRp $src2,ST" %}
10363 ins_cost(250);
10364 ins_encode( Push_Reg_F(src0),
10365 FMul_ST_reg(src1),
10366 Opcode(0xDE), Opc_plus(0xE0,src2));
10367 ins_pipe( fpu_reg_reg_reg );
10368 %}
10371 instruct divD_reg(regD dst, regD src) %{
10372 predicate( UseSSE<=1 );
10373 match(Set dst (DivD dst src));
10375 format %{ "FLD $src\n\t"
10376 "FDIVp $dst,ST" %}
10377 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10378 ins_cost(150);
10379 ins_encode( Push_Reg_D(src),
10380 OpcP, RegOpc(dst) );
10381 ins_pipe( fpu_reg_reg );
10382 %}
10384 // Strict FP instruction biases argument before division then
10385 // biases result, to avoid double rounding of subnormals.
10386 //
10387 // scale dividend by multiplying dividend by 2^(-15360)
10388 // load divisor
10389 // divide scaled dividend by divisor
10390 // rescale quotient by 2^(15360)
10391 //
10392 instruct strictfp_divD_reg(regDPR1 dst, regnotDPR1 src) %{
10393 predicate (UseSSE<=1);
10394 match(Set dst (DivD dst src));
10395 predicate( UseSSE<=1 && Compile::current()->has_method() && Compile::current()->method()->is_strict() );
10396 ins_cost(01);
10398 format %{ "FLD StubRoutines::_fpu_subnormal_bias1\n\t"
10399 "DMULp $dst,ST\n\t"
10400 "FLD $src\n\t"
10401 "FDIVp $dst,ST\n\t"
10402 "FLD StubRoutines::_fpu_subnormal_bias2\n\t"
10403 "DMULp $dst,ST\n\t" %}
10404 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
10405 ins_encode( strictfp_bias1(dst),
10406 Push_Reg_D(src),
10407 OpcP, RegOpc(dst),
10408 strictfp_bias2(dst) );
10409 ins_pipe( fpu_reg_reg );
10410 %}
10412 instruct divD_reg_round(stackSlotD dst, regD src1, regD src2) %{
10413 predicate( UseSSE<=1 && !(Compile::current()->has_method() && Compile::current()->method()->is_strict()) );
10414 match(Set dst (RoundDouble (DivD src1 src2)));
10416 format %{ "FLD $src1\n\t"
10417 "FDIV ST,$src2\n\t"
10418 "FSTP_D $dst\t# D-round" %}
10419 opcode(0xD8, 0x6); /* D8 F0+i or D8 /6 */
10420 ins_encode( Push_Reg_D(src1),
10421 OpcP, RegOpc(src2), Pop_Mem_D(dst) );
10422 ins_pipe( fpu_mem_reg_reg );
10423 %}
10426 instruct modD_reg(regD dst, regD src, eAXRegI rax, eFlagsReg cr) %{
10427 predicate(UseSSE<=1);
10428 match(Set dst (ModD dst src));
10429 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
10431 format %{ "DMOD $dst,$src" %}
10432 ins_cost(250);
10433 ins_encode(Push_Reg_Mod_D(dst, src),
10434 emitModD(),
10435 Push_Result_Mod_D(src),
10436 Pop_Reg_D(dst));
10437 ins_pipe( pipe_slow );
10438 %}
10440 instruct modXD_reg(regXD dst, regXD src0, regXD src1, eAXRegI rax, eFlagsReg cr) %{
10441 predicate(UseSSE>=2);
10442 match(Set dst (ModD src0 src1));
10443 effect(KILL rax, KILL cr);
10445 format %{ "SUB ESP,8\t # DMOD\n"
10446 "\tMOVSD [ESP+0],$src1\n"
10447 "\tFLD_D [ESP+0]\n"
10448 "\tMOVSD [ESP+0],$src0\n"
10449 "\tFLD_D [ESP+0]\n"
10450 "loop:\tFPREM\n"
10451 "\tFWAIT\n"
10452 "\tFNSTSW AX\n"
10453 "\tSAHF\n"
10454 "\tJP loop\n"
10455 "\tFSTP_D [ESP+0]\n"
10456 "\tMOVSD $dst,[ESP+0]\n"
10457 "\tADD ESP,8\n"
10458 "\tFSTP ST0\t # Restore FPU Stack"
10459 %}
10460 ins_cost(250);
10461 ins_encode( Push_ModD_encoding(src0, src1), emitModD(), Push_ResultXD(dst), PopFPU);
10462 ins_pipe( pipe_slow );
10463 %}
10465 instruct sinD_reg(regDPR1 dst, regDPR1 src) %{
10466 predicate (UseSSE<=1);
10467 match(Set dst (SinD src));
10468 ins_cost(1800);
10469 format %{ "DSIN $dst" %}
10470 opcode(0xD9, 0xFE);
10471 ins_encode( OpcP, OpcS );
10472 ins_pipe( pipe_slow );
10473 %}
10475 instruct sinXD_reg(regXD dst, eFlagsReg cr) %{
10476 predicate (UseSSE>=2);
10477 match(Set dst (SinD dst));
10478 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10479 ins_cost(1800);
10480 format %{ "DSIN $dst" %}
10481 opcode(0xD9, 0xFE);
10482 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10483 ins_pipe( pipe_slow );
10484 %}
10486 instruct cosD_reg(regDPR1 dst, regDPR1 src) %{
10487 predicate (UseSSE<=1);
10488 match(Set dst (CosD src));
10489 ins_cost(1800);
10490 format %{ "DCOS $dst" %}
10491 opcode(0xD9, 0xFF);
10492 ins_encode( OpcP, OpcS );
10493 ins_pipe( pipe_slow );
10494 %}
10496 instruct cosXD_reg(regXD dst, eFlagsReg cr) %{
10497 predicate (UseSSE>=2);
10498 match(Set dst (CosD dst));
10499 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10500 ins_cost(1800);
10501 format %{ "DCOS $dst" %}
10502 opcode(0xD9, 0xFF);
10503 ins_encode( Push_SrcXD(dst), OpcP, OpcS, Push_ResultXD(dst) );
10504 ins_pipe( pipe_slow );
10505 %}
10507 instruct tanD_reg(regDPR1 dst, regDPR1 src) %{
10508 predicate (UseSSE<=1);
10509 match(Set dst(TanD src));
10510 format %{ "DTAN $dst" %}
10511 ins_encode( Opcode(0xD9), Opcode(0xF2), // fptan
10512 Opcode(0xDD), Opcode(0xD8)); // fstp st
10513 ins_pipe( pipe_slow );
10514 %}
10516 instruct tanXD_reg(regXD dst, eFlagsReg cr) %{
10517 predicate (UseSSE>=2);
10518 match(Set dst(TanD dst));
10519 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10520 format %{ "DTAN $dst" %}
10521 ins_encode( Push_SrcXD(dst),
10522 Opcode(0xD9), Opcode(0xF2), // fptan
10523 Opcode(0xDD), Opcode(0xD8), // fstp st
10524 Push_ResultXD(dst) );
10525 ins_pipe( pipe_slow );
10526 %}
10528 instruct atanD_reg(regD dst, regD src) %{
10529 predicate (UseSSE<=1);
10530 match(Set dst(AtanD dst src));
10531 format %{ "DATA $dst,$src" %}
10532 opcode(0xD9, 0xF3);
10533 ins_encode( Push_Reg_D(src),
10534 OpcP, OpcS, RegOpc(dst) );
10535 ins_pipe( pipe_slow );
10536 %}
10538 instruct atanXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10539 predicate (UseSSE>=2);
10540 match(Set dst(AtanD dst src));
10541 effect(KILL cr); // Push_{Src|Result}XD() uses "{SUB|ADD} ESP,8"
10542 format %{ "DATA $dst,$src" %}
10543 opcode(0xD9, 0xF3);
10544 ins_encode( Push_SrcXD(src),
10545 OpcP, OpcS, Push_ResultXD(dst) );
10546 ins_pipe( pipe_slow );
10547 %}
10549 instruct sqrtD_reg(regD dst, regD src) %{
10550 predicate (UseSSE<=1);
10551 match(Set dst (SqrtD src));
10552 format %{ "DSQRT $dst,$src" %}
10553 opcode(0xFA, 0xD9);
10554 ins_encode( Push_Reg_D(src),
10555 OpcS, OpcP, Pop_Reg_D(dst) );
10556 ins_pipe( pipe_slow );
10557 %}
10559 instruct powD_reg(regD X, regDPR1 Y, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10560 predicate (UseSSE<=1);
10561 match(Set Y (PowD X Y)); // Raise X to the Yth power
10562 effect(KILL rax, KILL rbx, KILL rcx);
10563 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10564 "FLD_D $X\n\t"
10565 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10567 "FDUP \t\t\t# Q Q\n\t"
10568 "FRNDINT\t\t\t# int(Q) Q\n\t"
10569 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10570 "FISTP dword [ESP]\n\t"
10571 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10572 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10573 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10574 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10575 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10576 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10577 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10578 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10579 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10580 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10581 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10582 "MOV [ESP+0],0\n\t"
10583 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10585 "ADD ESP,8"
10586 %}
10587 ins_encode( push_stack_temp_qword,
10588 Push_Reg_D(X),
10589 Opcode(0xD9), Opcode(0xF1), // fyl2x
10590 pow_exp_core_encoding,
10591 pop_stack_temp_qword);
10592 ins_pipe( pipe_slow );
10593 %}
10595 instruct powXD_reg(regXD dst, regXD src0, regXD src1, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx ) %{
10596 predicate (UseSSE>=2);
10597 match(Set dst (PowD src0 src1)); // Raise src0 to the src1'th power
10598 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx );
10599 format %{ "SUB ESP,8\t\t# Fast-path POW encoding\n\t"
10600 "MOVSD [ESP],$src1\n\t"
10601 "FLD FPR1,$src1\n\t"
10602 "MOVSD [ESP],$src0\n\t"
10603 "FLD FPR1,$src0\n\t"
10604 "FYL2X \t\t\t# Q=Y*ln2(X)\n\t"
10606 "FDUP \t\t\t# Q Q\n\t"
10607 "FRNDINT\t\t\t# int(Q) Q\n\t"
10608 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10609 "FISTP dword [ESP]\n\t"
10610 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10611 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10612 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10613 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10614 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10615 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10616 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10617 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10618 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10619 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10620 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10621 "MOV [ESP+0],0\n\t"
10622 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10624 "FST_D [ESP]\n\t"
10625 "MOVSD $dst,[ESP]\n\t"
10626 "ADD ESP,8"
10627 %}
10628 ins_encode( push_stack_temp_qword,
10629 push_xmm_to_fpr1(src1),
10630 push_xmm_to_fpr1(src0),
10631 Opcode(0xD9), Opcode(0xF1), // fyl2x
10632 pow_exp_core_encoding,
10633 Push_ResultXD(dst) );
10634 ins_pipe( pipe_slow );
10635 %}
10638 instruct expD_reg(regDPR1 dpr1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10639 predicate (UseSSE<=1);
10640 match(Set dpr1 (ExpD dpr1));
10641 effect(KILL rax, KILL rbx, KILL rcx);
10642 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding"
10643 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10644 "FMULP \t\t\t# Q=X*log2(e)\n\t"
10646 "FDUP \t\t\t# Q Q\n\t"
10647 "FRNDINT\t\t\t# int(Q) Q\n\t"
10648 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10649 "FISTP dword [ESP]\n\t"
10650 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10651 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10652 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10653 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10654 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10655 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10656 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10657 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10658 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10659 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10660 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10661 "MOV [ESP+0],0\n\t"
10662 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10664 "ADD ESP,8"
10665 %}
10666 ins_encode( push_stack_temp_qword,
10667 Opcode(0xD9), Opcode(0xEA), // fldl2e
10668 Opcode(0xDE), Opcode(0xC9), // fmulp
10669 pow_exp_core_encoding,
10670 pop_stack_temp_qword);
10671 ins_pipe( pipe_slow );
10672 %}
10674 instruct expXD_reg(regXD dst, regXD src, regDPR1 tmp1, eAXRegI rax, eBXRegI rbx, eCXRegI rcx) %{
10675 predicate (UseSSE>=2);
10676 match(Set dst (ExpD src));
10677 effect(KILL tmp1, KILL rax, KILL rbx, KILL rcx);
10678 format %{ "SUB ESP,8\t\t# Fast-path EXP encoding\n\t"
10679 "MOVSD [ESP],$src\n\t"
10680 "FLDL2E \t\t\t# Ld log2(e) X\n\t"
10681 "FMULP \t\t\t# Q=X*log2(e) X\n\t"
10683 "FDUP \t\t\t# Q Q\n\t"
10684 "FRNDINT\t\t\t# int(Q) Q\n\t"
10685 "FSUB ST(1),ST(0)\t# int(Q) frac(Q)\n\t"
10686 "FISTP dword [ESP]\n\t"
10687 "F2XM1 \t\t\t# 2^frac(Q)-1 int(Q)\n\t"
10688 "FLD1 \t\t\t# 1 2^frac(Q)-1 int(Q)\n\t"
10689 "FADDP \t\t\t# 2^frac(Q) int(Q)\n\t" // could use FADD [1.000] instead
10690 "MOV EAX,[ESP]\t# Pick up int(Q)\n\t"
10691 "MOV ECX,0xFFFFF800\t# Overflow mask\n\t"
10692 "ADD EAX,1023\t\t# Double exponent bias\n\t"
10693 "MOV EBX,EAX\t\t# Preshifted biased expo\n\t"
10694 "SHL EAX,20\t\t# Shift exponent into place\n\t"
10695 "TEST EBX,ECX\t\t# Check for overflow\n\t"
10696 "CMOVne EAX,ECX\t\t# If overflow, stuff NaN into EAX\n\t"
10697 "MOV [ESP+4],EAX\t# Marshal 64-bit scaling double\n\t"
10698 "MOV [ESP+0],0\n\t"
10699 "FMUL ST(0),[ESP+0]\t# Scale\n\t"
10701 "FST_D [ESP]\n\t"
10702 "MOVSD $dst,[ESP]\n\t"
10703 "ADD ESP,8"
10704 %}
10705 ins_encode( Push_SrcXD(src),
10706 Opcode(0xD9), Opcode(0xEA), // fldl2e
10707 Opcode(0xDE), Opcode(0xC9), // fmulp
10708 pow_exp_core_encoding,
10709 Push_ResultXD(dst) );
10710 ins_pipe( pipe_slow );
10711 %}
10715 instruct log10D_reg(regDPR1 dst, regDPR1 src) %{
10716 predicate (UseSSE<=1);
10717 // The source Double operand on FPU stack
10718 match(Set dst (Log10D src));
10719 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10720 // fxch ; swap ST(0) with ST(1)
10721 // fyl2x ; compute log_10(2) * log_2(x)
10722 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10723 "FXCH \n\t"
10724 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10725 %}
10726 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10727 Opcode(0xD9), Opcode(0xC9), // fxch
10728 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10730 ins_pipe( pipe_slow );
10731 %}
10733 instruct log10XD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10734 predicate (UseSSE>=2);
10735 effect(KILL cr);
10736 match(Set dst (Log10D src));
10737 // fldlg2 ; push log_10(2) on the FPU stack; full 80-bit number
10738 // fyl2x ; compute log_10(2) * log_2(x)
10739 format %{ "FLDLG2 \t\t\t#Log10\n\t"
10740 "FYL2X \t\t\t# Q=Log10*Log_2(x)"
10741 %}
10742 ins_encode( Opcode(0xD9), Opcode(0xEC), // fldlg2
10743 Push_SrcXD(src),
10744 Opcode(0xD9), Opcode(0xF1), // fyl2x
10745 Push_ResultXD(dst));
10747 ins_pipe( pipe_slow );
10748 %}
10750 instruct logD_reg(regDPR1 dst, regDPR1 src) %{
10751 predicate (UseSSE<=1);
10752 // The source Double operand on FPU stack
10753 match(Set dst (LogD src));
10754 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10755 // fxch ; swap ST(0) with ST(1)
10756 // fyl2x ; compute log_e(2) * log_2(x)
10757 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10758 "FXCH \n\t"
10759 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10760 %}
10761 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10762 Opcode(0xD9), Opcode(0xC9), // fxch
10763 Opcode(0xD9), Opcode(0xF1)); // fyl2x
10765 ins_pipe( pipe_slow );
10766 %}
10768 instruct logXD_reg(regXD dst, regXD src, eFlagsReg cr) %{
10769 predicate (UseSSE>=2);
10770 effect(KILL cr);
10771 // The source and result Double operands in XMM registers
10772 match(Set dst (LogD src));
10773 // fldln2 ; push log_e(2) on the FPU stack; full 80-bit number
10774 // fyl2x ; compute log_e(2) * log_2(x)
10775 format %{ "FLDLN2 \t\t\t#Log_e\n\t"
10776 "FYL2X \t\t\t# Q=Log_e*Log_2(x)"
10777 %}
10778 ins_encode( Opcode(0xD9), Opcode(0xED), // fldln2
10779 Push_SrcXD(src),
10780 Opcode(0xD9), Opcode(0xF1), // fyl2x
10781 Push_ResultXD(dst));
10782 ins_pipe( pipe_slow );
10783 %}
10785 //-------------Float Instructions-------------------------------
10786 // Float Math
10788 // Code for float compare:
10789 // fcompp();
10790 // fwait(); fnstsw_ax();
10791 // sahf();
10792 // movl(dst, unordered_result);
10793 // jcc(Assembler::parity, exit);
10794 // movl(dst, less_result);
10795 // jcc(Assembler::below, exit);
10796 // movl(dst, equal_result);
10797 // jcc(Assembler::equal, exit);
10798 // movl(dst, greater_result);
10799 // exit:
10801 // P6 version of float compare, sets condition codes in EFLAGS
10802 instruct cmpF_cc_P6(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
10803 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10804 match(Set cr (CmpF src1 src2));
10805 effect(KILL rax);
10806 ins_cost(150);
10807 format %{ "FLD $src1\n\t"
10808 "FUCOMIP ST,$src2 // P6 instruction\n\t"
10809 "JNP exit\n\t"
10810 "MOV ah,1 // saw a NaN, set CF (treat as LT)\n\t"
10811 "SAHF\n"
10812 "exit:\tNOP // avoid branch to branch" %}
10813 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10814 ins_encode( Push_Reg_D(src1),
10815 OpcP, RegOpc(src2),
10816 cmpF_P6_fixup );
10817 ins_pipe( pipe_slow );
10818 %}
10820 instruct cmpF_cc_P6CF(eFlagsRegUCF cr, regF src1, regF src2) %{
10821 predicate(VM_Version::supports_cmov() && UseSSE == 0);
10822 match(Set cr (CmpF src1 src2));
10823 ins_cost(100);
10824 format %{ "FLD $src1\n\t"
10825 "FUCOMIP ST,$src2 // P6 instruction" %}
10826 opcode(0xDF, 0x05); /* DF E8+i or DF /5 */
10827 ins_encode( Push_Reg_D(src1),
10828 OpcP, RegOpc(src2));
10829 ins_pipe( pipe_slow );
10830 %}
10833 // Compare & branch
10834 instruct cmpF_cc(eFlagsRegU cr, regF src1, regF src2, eAXRegI rax) %{
10835 predicate(UseSSE == 0);
10836 match(Set cr (CmpF src1 src2));
10837 effect(KILL rax);
10838 ins_cost(200);
10839 format %{ "FLD $src1\n\t"
10840 "FCOMp $src2\n\t"
10841 "FNSTSW AX\n\t"
10842 "TEST AX,0x400\n\t"
10843 "JZ,s flags\n\t"
10844 "MOV AH,1\t# unordered treat as LT\n"
10845 "flags:\tSAHF" %}
10846 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10847 ins_encode( Push_Reg_D(src1),
10848 OpcP, RegOpc(src2),
10849 fpu_flags);
10850 ins_pipe( pipe_slow );
10851 %}
10853 // Compare vs zero into -1,0,1
10854 instruct cmpF_0(eRegI dst, regF src1, immF0 zero, eAXRegI rax, eFlagsReg cr) %{
10855 predicate(UseSSE == 0);
10856 match(Set dst (CmpF3 src1 zero));
10857 effect(KILL cr, KILL rax);
10858 ins_cost(280);
10859 format %{ "FTSTF $dst,$src1" %}
10860 opcode(0xE4, 0xD9);
10861 ins_encode( Push_Reg_D(src1),
10862 OpcS, OpcP, PopFPU,
10863 CmpF_Result(dst));
10864 ins_pipe( pipe_slow );
10865 %}
10867 // Compare into -1,0,1
10868 instruct cmpF_reg(eRegI dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
10869 predicate(UseSSE == 0);
10870 match(Set dst (CmpF3 src1 src2));
10871 effect(KILL cr, KILL rax);
10872 ins_cost(300);
10873 format %{ "FCMPF $dst,$src1,$src2" %}
10874 opcode(0xD8, 0x3); /* D8 D8+i or D8 /3 */
10875 ins_encode( Push_Reg_D(src1),
10876 OpcP, RegOpc(src2),
10877 CmpF_Result(dst));
10878 ins_pipe( pipe_slow );
10879 %}
10881 // float compare and set condition codes in EFLAGS by XMM regs
10882 instruct cmpX_cc(eFlagsRegU cr, regX dst, regX src, eAXRegI rax) %{
10883 predicate(UseSSE>=1);
10884 match(Set cr (CmpF dst src));
10885 effect(KILL rax);
10886 ins_cost(145);
10887 format %{ "COMISS $dst,$src\n"
10888 "\tJNP exit\n"
10889 "\tMOV ah,1 // saw a NaN, set CF\n"
10890 "\tSAHF\n"
10891 "exit:\tNOP // avoid branch to branch" %}
10892 opcode(0x0F, 0x2F);
10893 ins_encode(OpcP, OpcS, RegReg(dst, src), cmpF_P6_fixup);
10894 ins_pipe( pipe_slow );
10895 %}
10897 instruct cmpX_ccCF(eFlagsRegUCF cr, regX dst, regX src) %{
10898 predicate(UseSSE>=1);
10899 match(Set cr (CmpF dst src));
10900 ins_cost(100);
10901 format %{ "COMISS $dst,$src" %}
10902 opcode(0x0F, 0x2F);
10903 ins_encode(OpcP, OpcS, RegReg(dst, src));
10904 ins_pipe( pipe_slow );
10905 %}
10907 // float compare and set condition codes in EFLAGS by XMM regs
10908 instruct cmpX_ccmem(eFlagsRegU cr, regX dst, memory src, eAXRegI rax) %{
10909 predicate(UseSSE>=1);
10910 match(Set cr (CmpF dst (LoadF src)));
10911 effect(KILL rax);
10912 ins_cost(165);
10913 format %{ "COMISS $dst,$src\n"
10914 "\tJNP exit\n"
10915 "\tMOV ah,1 // saw a NaN, set CF\n"
10916 "\tSAHF\n"
10917 "exit:\tNOP // avoid branch to branch" %}
10918 opcode(0x0F, 0x2F);
10919 ins_encode(OpcP, OpcS, RegMem(dst, src), cmpF_P6_fixup);
10920 ins_pipe( pipe_slow );
10921 %}
10923 instruct cmpX_ccmemCF(eFlagsRegUCF cr, regX dst, memory src) %{
10924 predicate(UseSSE>=1);
10925 match(Set cr (CmpF dst (LoadF src)));
10926 ins_cost(100);
10927 format %{ "COMISS $dst,$src" %}
10928 opcode(0x0F, 0x2F);
10929 ins_encode(OpcP, OpcS, RegMem(dst, src));
10930 ins_pipe( pipe_slow );
10931 %}
10933 // Compare into -1,0,1 in XMM
10934 instruct cmpX_reg(eRegI dst, regX src1, regX src2, eFlagsReg cr) %{
10935 predicate(UseSSE>=1);
10936 match(Set dst (CmpF3 src1 src2));
10937 effect(KILL cr);
10938 ins_cost(255);
10939 format %{ "XOR $dst,$dst\n"
10940 "\tCOMISS $src1,$src2\n"
10941 "\tJP,s nan\n"
10942 "\tJEQ,s exit\n"
10943 "\tJA,s inc\n"
10944 "nan:\tDEC $dst\n"
10945 "\tJMP,s exit\n"
10946 "inc:\tINC $dst\n"
10947 "exit:"
10948 %}
10949 opcode(0x0F, 0x2F);
10950 ins_encode(Xor_Reg(dst), OpcP, OpcS, RegReg(src1, src2), CmpX_Result(dst));
10951 ins_pipe( pipe_slow );
10952 %}
10954 // Compare into -1,0,1 in XMM and memory
10955 instruct cmpX_regmem(eRegI dst, regX src1, memory mem, eFlagsReg cr) %{
10956 predicate(UseSSE>=1);
10957 match(Set dst (CmpF3 src1 (LoadF mem)));
10958 effect(KILL cr);
10959 ins_cost(275);
10960 format %{ "COMISS $src1,$mem\n"
10961 "\tMOV $dst,0\t\t# do not blow flags\n"
10962 "\tJP,s nan\n"
10963 "\tJEQ,s exit\n"
10964 "\tJA,s inc\n"
10965 "nan:\tDEC $dst\n"
10966 "\tJMP,s exit\n"
10967 "inc:\tINC $dst\n"
10968 "exit:"
10969 %}
10970 opcode(0x0F, 0x2F);
10971 ins_encode(OpcP, OpcS, RegMem(src1, mem), LdImmI(dst,0x0), CmpX_Result(dst));
10972 ins_pipe( pipe_slow );
10973 %}
10975 // Spill to obtain 24-bit precision
10976 instruct subF24_reg(stackSlotF dst, regF src1, regF src2) %{
10977 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
10978 match(Set dst (SubF src1 src2));
10980 format %{ "FSUB $dst,$src1 - $src2" %}
10981 opcode(0xD8, 0x4); /* D8 E0+i or D8 /4 mod==0x3 ;; result in TOS */
10982 ins_encode( Push_Reg_F(src1),
10983 OpcReg_F(src2),
10984 Pop_Mem_F(dst) );
10985 ins_pipe( fpu_mem_reg_reg );
10986 %}
10987 //
10988 // This instruction does not round to 24-bits
10989 instruct subF_reg(regF dst, regF src) %{
10990 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
10991 match(Set dst (SubF dst src));
10993 format %{ "FSUB $dst,$src" %}
10994 opcode(0xDE, 0x5); /* DE E8+i or DE /5 */
10995 ins_encode( Push_Reg_F(src),
10996 OpcP, RegOpc(dst) );
10997 ins_pipe( fpu_reg_reg );
10998 %}
11000 // Spill to obtain 24-bit precision
11001 instruct addF24_reg(stackSlotF dst, regF src1, regF src2) %{
11002 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11003 match(Set dst (AddF src1 src2));
11005 format %{ "FADD $dst,$src1,$src2" %}
11006 opcode(0xD8, 0x0); /* D8 C0+i */
11007 ins_encode( Push_Reg_F(src2),
11008 OpcReg_F(src1),
11009 Pop_Mem_F(dst) );
11010 ins_pipe( fpu_mem_reg_reg );
11011 %}
11012 //
11013 // This instruction does not round to 24-bits
11014 instruct addF_reg(regF dst, regF src) %{
11015 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11016 match(Set dst (AddF dst src));
11018 format %{ "FLD $src\n\t"
11019 "FADDp $dst,ST" %}
11020 opcode(0xDE, 0x0); /* DE C0+i or DE /0*/
11021 ins_encode( Push_Reg_F(src),
11022 OpcP, RegOpc(dst) );
11023 ins_pipe( fpu_reg_reg );
11024 %}
11026 // Add two single precision floating point values in xmm
11027 instruct addX_reg(regX dst, regX src) %{
11028 predicate(UseSSE>=1);
11029 match(Set dst (AddF dst src));
11030 format %{ "ADDSS $dst,$src" %}
11031 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegReg(dst, src));
11032 ins_pipe( pipe_slow );
11033 %}
11035 instruct addX_imm(regX dst, immXF con) %{
11036 predicate(UseSSE>=1);
11037 match(Set dst (AddF dst con));
11038 format %{ "ADDSS $dst,[$con]" %}
11039 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), LdImmX(dst, con) );
11040 ins_pipe( pipe_slow );
11041 %}
11043 instruct addX_mem(regX dst, memory mem) %{
11044 predicate(UseSSE>=1);
11045 match(Set dst (AddF dst (LoadF mem)));
11046 format %{ "ADDSS $dst,$mem" %}
11047 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x58), RegMem(dst, mem));
11048 ins_pipe( pipe_slow );
11049 %}
11051 // Subtract two single precision floating point values in xmm
11052 instruct subX_reg(regX dst, regX src) %{
11053 predicate(UseSSE>=1);
11054 match(Set dst (SubF dst src));
11055 format %{ "SUBSS $dst,$src" %}
11056 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegReg(dst, src));
11057 ins_pipe( pipe_slow );
11058 %}
11060 instruct subX_imm(regX dst, immXF con) %{
11061 predicate(UseSSE>=1);
11062 match(Set dst (SubF dst con));
11063 format %{ "SUBSS $dst,[$con]" %}
11064 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), LdImmX(dst, con) );
11065 ins_pipe( pipe_slow );
11066 %}
11068 instruct subX_mem(regX dst, memory mem) %{
11069 predicate(UseSSE>=1);
11070 match(Set dst (SubF dst (LoadF mem)));
11071 format %{ "SUBSS $dst,$mem" %}
11072 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5C), RegMem(dst,mem));
11073 ins_pipe( pipe_slow );
11074 %}
11076 // Multiply two single precision floating point values in xmm
11077 instruct mulX_reg(regX dst, regX src) %{
11078 predicate(UseSSE>=1);
11079 match(Set dst (MulF dst src));
11080 format %{ "MULSS $dst,$src" %}
11081 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegReg(dst, src));
11082 ins_pipe( pipe_slow );
11083 %}
11085 instruct mulX_imm(regX dst, immXF con) %{
11086 predicate(UseSSE>=1);
11087 match(Set dst (MulF dst con));
11088 format %{ "MULSS $dst,[$con]" %}
11089 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), LdImmX(dst, con) );
11090 ins_pipe( pipe_slow );
11091 %}
11093 instruct mulX_mem(regX dst, memory mem) %{
11094 predicate(UseSSE>=1);
11095 match(Set dst (MulF dst (LoadF mem)));
11096 format %{ "MULSS $dst,$mem" %}
11097 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x59), RegMem(dst,mem));
11098 ins_pipe( pipe_slow );
11099 %}
11101 // Divide two single precision floating point values in xmm
11102 instruct divX_reg(regX dst, regX src) %{
11103 predicate(UseSSE>=1);
11104 match(Set dst (DivF dst src));
11105 format %{ "DIVSS $dst,$src" %}
11106 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegReg(dst, src));
11107 ins_pipe( pipe_slow );
11108 %}
11110 instruct divX_imm(regX dst, immXF con) %{
11111 predicate(UseSSE>=1);
11112 match(Set dst (DivF dst con));
11113 format %{ "DIVSS $dst,[$con]" %}
11114 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), LdImmX(dst, con) );
11115 ins_pipe( pipe_slow );
11116 %}
11118 instruct divX_mem(regX dst, memory mem) %{
11119 predicate(UseSSE>=1);
11120 match(Set dst (DivF dst (LoadF mem)));
11121 format %{ "DIVSS $dst,$mem" %}
11122 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x5E), RegMem(dst,mem));
11123 ins_pipe( pipe_slow );
11124 %}
11126 // Get the square root of a single precision floating point values in xmm
11127 instruct sqrtX_reg(regX dst, regX src) %{
11128 predicate(UseSSE>=1);
11129 match(Set dst (ConvD2F (SqrtD (ConvF2D src))));
11130 format %{ "SQRTSS $dst,$src" %}
11131 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11132 ins_pipe( pipe_slow );
11133 %}
11135 instruct sqrtX_mem(regX dst, memory mem) %{
11136 predicate(UseSSE>=1);
11137 match(Set dst (ConvD2F (SqrtD (ConvF2D (LoadF mem)))));
11138 format %{ "SQRTSS $dst,$mem" %}
11139 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11140 ins_pipe( pipe_slow );
11141 %}
11143 // Get the square root of a double precision floating point values in xmm
11144 instruct sqrtXD_reg(regXD dst, regXD src) %{
11145 predicate(UseSSE>=2);
11146 match(Set dst (SqrtD src));
11147 format %{ "SQRTSD $dst,$src" %}
11148 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegReg(dst, src));
11149 ins_pipe( pipe_slow );
11150 %}
11152 instruct sqrtXD_mem(regXD dst, memory mem) %{
11153 predicate(UseSSE>=2);
11154 match(Set dst (SqrtD (LoadD mem)));
11155 format %{ "SQRTSD $dst,$mem" %}
11156 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x51), RegMem(dst, mem));
11157 ins_pipe( pipe_slow );
11158 %}
11160 instruct absF_reg(regFPR1 dst, regFPR1 src) %{
11161 predicate(UseSSE==0);
11162 match(Set dst (AbsF src));
11163 ins_cost(100);
11164 format %{ "FABS" %}
11165 opcode(0xE1, 0xD9);
11166 ins_encode( OpcS, OpcP );
11167 ins_pipe( fpu_reg_reg );
11168 %}
11170 instruct absX_reg(regX dst ) %{
11171 predicate(UseSSE>=1);
11172 match(Set dst (AbsF dst));
11173 format %{ "ANDPS $dst,[0x7FFFFFFF]\t# ABS F by sign masking" %}
11174 ins_encode( AbsXF_encoding(dst));
11175 ins_pipe( pipe_slow );
11176 %}
11178 instruct negF_reg(regFPR1 dst, regFPR1 src) %{
11179 predicate(UseSSE==0);
11180 match(Set dst (NegF src));
11181 ins_cost(100);
11182 format %{ "FCHS" %}
11183 opcode(0xE0, 0xD9);
11184 ins_encode( OpcS, OpcP );
11185 ins_pipe( fpu_reg_reg );
11186 %}
11188 instruct negX_reg( regX dst ) %{
11189 predicate(UseSSE>=1);
11190 match(Set dst (NegF dst));
11191 format %{ "XORPS $dst,[0x80000000]\t# CHS F by sign flipping" %}
11192 ins_encode( NegXF_encoding(dst));
11193 ins_pipe( pipe_slow );
11194 %}
11196 // Cisc-alternate to addF_reg
11197 // Spill to obtain 24-bit precision
11198 instruct addF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11199 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11200 match(Set dst (AddF src1 (LoadF src2)));
11202 format %{ "FLD $src2\n\t"
11203 "FADD ST,$src1\n\t"
11204 "FSTP_S $dst" %}
11205 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11206 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11207 OpcReg_F(src1),
11208 Pop_Mem_F(dst) );
11209 ins_pipe( fpu_mem_reg_mem );
11210 %}
11211 //
11212 // Cisc-alternate to addF_reg
11213 // This instruction does not round to 24-bits
11214 instruct addF_reg_mem(regF dst, memory src) %{
11215 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11216 match(Set dst (AddF dst (LoadF src)));
11218 format %{ "FADD $dst,$src" %}
11219 opcode(0xDE, 0x0, 0xD9); /* DE C0+i or DE /0*/ /* LoadF D9 /0 */
11220 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src),
11221 OpcP, RegOpc(dst) );
11222 ins_pipe( fpu_reg_mem );
11223 %}
11225 // // Following two instructions for _222_mpegaudio
11226 // Spill to obtain 24-bit precision
11227 instruct addF24_mem_reg(stackSlotF dst, regF src2, memory src1 ) %{
11228 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11229 match(Set dst (AddF src1 src2));
11231 format %{ "FADD $dst,$src1,$src2" %}
11232 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11233 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src1),
11234 OpcReg_F(src2),
11235 Pop_Mem_F(dst) );
11236 ins_pipe( fpu_mem_reg_mem );
11237 %}
11239 // Cisc-spill variant
11240 // Spill to obtain 24-bit precision
11241 instruct addF24_mem_cisc(stackSlotF dst, memory src1, memory src2) %{
11242 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11243 match(Set dst (AddF src1 (LoadF src2)));
11245 format %{ "FADD $dst,$src1,$src2 cisc" %}
11246 opcode(0xD8, 0x0, 0xD9); /* D8 C0+i */ /* LoadF D9 /0 */
11247 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11248 set_instruction_start,
11249 OpcP, RMopc_Mem(secondary,src1),
11250 Pop_Mem_F(dst) );
11251 ins_pipe( fpu_mem_mem_mem );
11252 %}
11254 // Spill to obtain 24-bit precision
11255 instruct addF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11256 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11257 match(Set dst (AddF src1 src2));
11259 format %{ "FADD $dst,$src1,$src2" %}
11260 opcode(0xD8, 0x0, 0xD9); /* D8 /0 */ /* LoadF D9 /0 */
11261 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11262 set_instruction_start,
11263 OpcP, RMopc_Mem(secondary,src1),
11264 Pop_Mem_F(dst) );
11265 ins_pipe( fpu_mem_mem_mem );
11266 %}
11269 // Spill to obtain 24-bit precision
11270 instruct addF24_reg_imm(stackSlotF dst, regF src1, immF src2) %{
11271 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11272 match(Set dst (AddF src1 src2));
11273 format %{ "FLD $src1\n\t"
11274 "FADD $src2\n\t"
11275 "FSTP_S $dst" %}
11276 opcode(0xD8, 0x00); /* D8 /0 */
11277 ins_encode( Push_Reg_F(src1),
11278 Opc_MemImm_F(src2),
11279 Pop_Mem_F(dst));
11280 ins_pipe( fpu_mem_reg_con );
11281 %}
11282 //
11283 // This instruction does not round to 24-bits
11284 instruct addF_reg_imm(regF dst, regF src1, immF src2) %{
11285 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11286 match(Set dst (AddF src1 src2));
11287 format %{ "FLD $src1\n\t"
11288 "FADD $src2\n\t"
11289 "FSTP_S $dst" %}
11290 opcode(0xD8, 0x00); /* D8 /0 */
11291 ins_encode( Push_Reg_F(src1),
11292 Opc_MemImm_F(src2),
11293 Pop_Reg_F(dst));
11294 ins_pipe( fpu_reg_reg_con );
11295 %}
11297 // Spill to obtain 24-bit precision
11298 instruct mulF24_reg(stackSlotF dst, regF src1, regF src2) %{
11299 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11300 match(Set dst (MulF src1 src2));
11302 format %{ "FLD $src1\n\t"
11303 "FMUL $src2\n\t"
11304 "FSTP_S $dst" %}
11305 opcode(0xD8, 0x1); /* D8 C8+i or D8 /1 ;; result in TOS */
11306 ins_encode( Push_Reg_F(src1),
11307 OpcReg_F(src2),
11308 Pop_Mem_F(dst) );
11309 ins_pipe( fpu_mem_reg_reg );
11310 %}
11311 //
11312 // This instruction does not round to 24-bits
11313 instruct mulF_reg(regF dst, regF src1, regF src2) %{
11314 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11315 match(Set dst (MulF src1 src2));
11317 format %{ "FLD $src1\n\t"
11318 "FMUL $src2\n\t"
11319 "FSTP_S $dst" %}
11320 opcode(0xD8, 0x1); /* D8 C8+i */
11321 ins_encode( Push_Reg_F(src2),
11322 OpcReg_F(src1),
11323 Pop_Reg_F(dst) );
11324 ins_pipe( fpu_reg_reg_reg );
11325 %}
11328 // Spill to obtain 24-bit precision
11329 // Cisc-alternate to reg-reg multiply
11330 instruct mulF24_reg_mem(stackSlotF dst, regF src1, memory src2) %{
11331 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11332 match(Set dst (MulF src1 (LoadF src2)));
11334 format %{ "FLD_S $src2\n\t"
11335 "FMUL $src1\n\t"
11336 "FSTP_S $dst" %}
11337 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or DE /1*/ /* LoadF D9 /0 */
11338 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11339 OpcReg_F(src1),
11340 Pop_Mem_F(dst) );
11341 ins_pipe( fpu_mem_reg_mem );
11342 %}
11343 //
11344 // This instruction does not round to 24-bits
11345 // Cisc-alternate to reg-reg multiply
11346 instruct mulF_reg_mem(regF dst, regF src1, memory src2) %{
11347 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11348 match(Set dst (MulF src1 (LoadF src2)));
11350 format %{ "FMUL $dst,$src1,$src2" %}
11351 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i */ /* LoadF D9 /0 */
11352 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11353 OpcReg_F(src1),
11354 Pop_Reg_F(dst) );
11355 ins_pipe( fpu_reg_reg_mem );
11356 %}
11358 // Spill to obtain 24-bit precision
11359 instruct mulF24_mem_mem(stackSlotF dst, memory src1, memory src2) %{
11360 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11361 match(Set dst (MulF src1 src2));
11363 format %{ "FMUL $dst,$src1,$src2" %}
11364 opcode(0xD8, 0x1, 0xD9); /* D8 /1 */ /* LoadF D9 /0 */
11365 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,src2),
11366 set_instruction_start,
11367 OpcP, RMopc_Mem(secondary,src1),
11368 Pop_Mem_F(dst) );
11369 ins_pipe( fpu_mem_mem_mem );
11370 %}
11372 // Spill to obtain 24-bit precision
11373 instruct mulF24_reg_imm(stackSlotF dst, regF src1, immF src2) %{
11374 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11375 match(Set dst (MulF src1 src2));
11377 format %{ "FMULc $dst,$src1,$src2" %}
11378 opcode(0xD8, 0x1); /* D8 /1*/
11379 ins_encode( Push_Reg_F(src1),
11380 Opc_MemImm_F(src2),
11381 Pop_Mem_F(dst));
11382 ins_pipe( fpu_mem_reg_con );
11383 %}
11384 //
11385 // This instruction does not round to 24-bits
11386 instruct mulF_reg_imm(regF dst, regF src1, immF src2) %{
11387 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11388 match(Set dst (MulF src1 src2));
11390 format %{ "FMULc $dst. $src1, $src2" %}
11391 opcode(0xD8, 0x1); /* D8 /1*/
11392 ins_encode( Push_Reg_F(src1),
11393 Opc_MemImm_F(src2),
11394 Pop_Reg_F(dst));
11395 ins_pipe( fpu_reg_reg_con );
11396 %}
11399 //
11400 // MACRO1 -- subsume unshared load into mulF
11401 // This instruction does not round to 24-bits
11402 instruct mulF_reg_load1(regF dst, regF src, memory mem1 ) %{
11403 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11404 match(Set dst (MulF (LoadF mem1) src));
11406 format %{ "FLD $mem1 ===MACRO1===\n\t"
11407 "FMUL ST,$src\n\t"
11408 "FSTP $dst" %}
11409 opcode(0xD8, 0x1, 0xD9); /* D8 C8+i or D8 /1 */ /* LoadF D9 /0 */
11410 ins_encode( Opcode(tertiary), RMopc_Mem(0x00,mem1),
11411 OpcReg_F(src),
11412 Pop_Reg_F(dst) );
11413 ins_pipe( fpu_reg_reg_mem );
11414 %}
11415 //
11416 // MACRO2 -- addF a mulF which subsumed an unshared load
11417 // This instruction does not round to 24-bits
11418 instruct addF_mulF_reg_load1(regF dst, memory mem1, regF src1, regF src2) %{
11419 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11420 match(Set dst (AddF (MulF (LoadF mem1) src1) src2));
11421 ins_cost(95);
11423 format %{ "FLD $mem1 ===MACRO2===\n\t"
11424 "FMUL ST,$src1 subsume mulF left load\n\t"
11425 "FADD ST,$src2\n\t"
11426 "FSTP $dst" %}
11427 opcode(0xD9); /* LoadF D9 /0 */
11428 ins_encode( OpcP, RMopc_Mem(0x00,mem1),
11429 FMul_ST_reg(src1),
11430 FAdd_ST_reg(src2),
11431 Pop_Reg_F(dst) );
11432 ins_pipe( fpu_reg_mem_reg_reg );
11433 %}
11435 // MACRO3 -- addF a mulF
11436 // This instruction does not round to 24-bits. It is a '2-address'
11437 // instruction in that the result goes back to src2. This eliminates
11438 // a move from the macro; possibly the register allocator will have
11439 // to add it back (and maybe not).
11440 instruct addF_mulF_reg(regF src2, regF src1, regF src0) %{
11441 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11442 match(Set src2 (AddF (MulF src0 src1) src2));
11444 format %{ "FLD $src0 ===MACRO3===\n\t"
11445 "FMUL ST,$src1\n\t"
11446 "FADDP $src2,ST" %}
11447 opcode(0xD9); /* LoadF D9 /0 */
11448 ins_encode( Push_Reg_F(src0),
11449 FMul_ST_reg(src1),
11450 FAddP_reg_ST(src2) );
11451 ins_pipe( fpu_reg_reg_reg );
11452 %}
11454 // MACRO4 -- divF subF
11455 // This instruction does not round to 24-bits
11456 instruct subF_divF_reg(regF dst, regF src1, regF src2, regF src3) %{
11457 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11458 match(Set dst (DivF (SubF src2 src1) src3));
11460 format %{ "FLD $src2 ===MACRO4===\n\t"
11461 "FSUB ST,$src1\n\t"
11462 "FDIV ST,$src3\n\t"
11463 "FSTP $dst" %}
11464 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11465 ins_encode( Push_Reg_F(src2),
11466 subF_divF_encode(src1,src3),
11467 Pop_Reg_F(dst) );
11468 ins_pipe( fpu_reg_reg_reg_reg );
11469 %}
11471 // Spill to obtain 24-bit precision
11472 instruct divF24_reg(stackSlotF dst, regF src1, regF src2) %{
11473 predicate(UseSSE==0 && Compile::current()->select_24_bit_instr());
11474 match(Set dst (DivF src1 src2));
11476 format %{ "FDIV $dst,$src1,$src2" %}
11477 opcode(0xD8, 0x6); /* D8 F0+i or DE /6*/
11478 ins_encode( Push_Reg_F(src1),
11479 OpcReg_F(src2),
11480 Pop_Mem_F(dst) );
11481 ins_pipe( fpu_mem_reg_reg );
11482 %}
11483 //
11484 // This instruction does not round to 24-bits
11485 instruct divF_reg(regF dst, regF src) %{
11486 predicate(UseSSE==0 && !Compile::current()->select_24_bit_instr());
11487 match(Set dst (DivF dst src));
11489 format %{ "FDIV $dst,$src" %}
11490 opcode(0xDE, 0x7); /* DE F8+i or DE /7*/
11491 ins_encode( Push_Reg_F(src),
11492 OpcP, RegOpc(dst) );
11493 ins_pipe( fpu_reg_reg );
11494 %}
11497 // Spill to obtain 24-bit precision
11498 instruct modF24_reg(stackSlotF dst, regF src1, regF src2, eAXRegI rax, eFlagsReg cr) %{
11499 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11500 match(Set dst (ModF src1 src2));
11501 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11503 format %{ "FMOD $dst,$src1,$src2" %}
11504 ins_encode( Push_Reg_Mod_D(src1, src2),
11505 emitModD(),
11506 Push_Result_Mod_D(src2),
11507 Pop_Mem_F(dst));
11508 ins_pipe( pipe_slow );
11509 %}
11510 //
11511 // This instruction does not round to 24-bits
11512 instruct modF_reg(regF dst, regF src, eAXRegI rax, eFlagsReg cr) %{
11513 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11514 match(Set dst (ModF dst src));
11515 effect(KILL rax, KILL cr); // emitModD() uses EAX and EFLAGS
11517 format %{ "FMOD $dst,$src" %}
11518 ins_encode(Push_Reg_Mod_D(dst, src),
11519 emitModD(),
11520 Push_Result_Mod_D(src),
11521 Pop_Reg_F(dst));
11522 ins_pipe( pipe_slow );
11523 %}
11525 instruct modX_reg(regX dst, regX src0, regX src1, eAXRegI rax, eFlagsReg cr) %{
11526 predicate(UseSSE>=1);
11527 match(Set dst (ModF src0 src1));
11528 effect(KILL rax, KILL cr);
11529 format %{ "SUB ESP,4\t # FMOD\n"
11530 "\tMOVSS [ESP+0],$src1\n"
11531 "\tFLD_S [ESP+0]\n"
11532 "\tMOVSS [ESP+0],$src0\n"
11533 "\tFLD_S [ESP+0]\n"
11534 "loop:\tFPREM\n"
11535 "\tFWAIT\n"
11536 "\tFNSTSW AX\n"
11537 "\tSAHF\n"
11538 "\tJP loop\n"
11539 "\tFSTP_S [ESP+0]\n"
11540 "\tMOVSS $dst,[ESP+0]\n"
11541 "\tADD ESP,4\n"
11542 "\tFSTP ST0\t # Restore FPU Stack"
11543 %}
11544 ins_cost(250);
11545 ins_encode( Push_ModX_encoding(src0, src1), emitModD(), Push_ResultX(dst,0x4), PopFPU);
11546 ins_pipe( pipe_slow );
11547 %}
11550 //----------Arithmetic Conversion Instructions---------------------------------
11551 // The conversions operations are all Alpha sorted. Please keep it that way!
11553 instruct roundFloat_mem_reg(stackSlotF dst, regF src) %{
11554 predicate(UseSSE==0);
11555 match(Set dst (RoundFloat src));
11556 ins_cost(125);
11557 format %{ "FST_S $dst,$src\t# F-round" %}
11558 ins_encode( Pop_Mem_Reg_F(dst, src) );
11559 ins_pipe( fpu_mem_reg );
11560 %}
11562 instruct roundDouble_mem_reg(stackSlotD dst, regD src) %{
11563 predicate(UseSSE<=1);
11564 match(Set dst (RoundDouble src));
11565 ins_cost(125);
11566 format %{ "FST_D $dst,$src\t# D-round" %}
11567 ins_encode( Pop_Mem_Reg_D(dst, src) );
11568 ins_pipe( fpu_mem_reg );
11569 %}
11571 // Force rounding to 24-bit precision and 6-bit exponent
11572 instruct convD2F_reg(stackSlotF dst, regD src) %{
11573 predicate(UseSSE==0);
11574 match(Set dst (ConvD2F src));
11575 format %{ "FST_S $dst,$src\t# F-round" %}
11576 expand %{
11577 roundFloat_mem_reg(dst,src);
11578 %}
11579 %}
11581 // Force rounding to 24-bit precision and 6-bit exponent
11582 instruct convD2X_reg(regX dst, regD src, eFlagsReg cr) %{
11583 predicate(UseSSE==1);
11584 match(Set dst (ConvD2F src));
11585 effect( KILL cr );
11586 format %{ "SUB ESP,4\n\t"
11587 "FST_S [ESP],$src\t# F-round\n\t"
11588 "MOVSS $dst,[ESP]\n\t"
11589 "ADD ESP,4" %}
11590 ins_encode( D2X_encoding(dst, src) );
11591 ins_pipe( pipe_slow );
11592 %}
11594 // Force rounding double precision to single precision
11595 instruct convXD2X_reg(regX dst, regXD src) %{
11596 predicate(UseSSE>=2);
11597 match(Set dst (ConvD2F src));
11598 format %{ "CVTSD2SS $dst,$src\t# F-round" %}
11599 opcode(0xF2, 0x0F, 0x5A);
11600 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11601 ins_pipe( pipe_slow );
11602 %}
11604 instruct convF2D_reg_reg(regD dst, regF src) %{
11605 predicate(UseSSE==0);
11606 match(Set dst (ConvF2D src));
11607 format %{ "FST_S $dst,$src\t# D-round" %}
11608 ins_encode( Pop_Reg_Reg_D(dst, src));
11609 ins_pipe( fpu_reg_reg );
11610 %}
11612 instruct convF2D_reg(stackSlotD dst, regF src) %{
11613 predicate(UseSSE==1);
11614 match(Set dst (ConvF2D src));
11615 format %{ "FST_D $dst,$src\t# D-round" %}
11616 expand %{
11617 roundDouble_mem_reg(dst,src);
11618 %}
11619 %}
11621 instruct convX2D_reg(regD dst, regX src, eFlagsReg cr) %{
11622 predicate(UseSSE==1);
11623 match(Set dst (ConvF2D src));
11624 effect( KILL cr );
11625 format %{ "SUB ESP,4\n\t"
11626 "MOVSS [ESP] $src\n\t"
11627 "FLD_S [ESP]\n\t"
11628 "ADD ESP,4\n\t"
11629 "FSTP $dst\t# D-round" %}
11630 ins_encode( X2D_encoding(dst, src), Pop_Reg_D(dst));
11631 ins_pipe( pipe_slow );
11632 %}
11634 instruct convX2XD_reg(regXD dst, regX src) %{
11635 predicate(UseSSE>=2);
11636 match(Set dst (ConvF2D src));
11637 format %{ "CVTSS2SD $dst,$src\t# D-round" %}
11638 opcode(0xF3, 0x0F, 0x5A);
11639 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11640 ins_pipe( pipe_slow );
11641 %}
11643 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11644 instruct convD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regD src, eFlagsReg cr ) %{
11645 predicate(UseSSE<=1);
11646 match(Set dst (ConvD2I src));
11647 effect( KILL tmp, KILL cr );
11648 format %{ "FLD $src\t# Convert double to int \n\t"
11649 "FLDCW trunc mode\n\t"
11650 "SUB ESP,4\n\t"
11651 "FISTp [ESP + #0]\n\t"
11652 "FLDCW std/24-bit mode\n\t"
11653 "POP EAX\n\t"
11654 "CMP EAX,0x80000000\n\t"
11655 "JNE,s fast\n\t"
11656 "FLD_D $src\n\t"
11657 "CALL d2i_wrapper\n"
11658 "fast:" %}
11659 ins_encode( Push_Reg_D(src), D2I_encoding(src) );
11660 ins_pipe( pipe_slow );
11661 %}
11663 // Convert a double to an int. If the double is a NAN, stuff a zero in instead.
11664 instruct convXD2I_reg_reg( eAXRegI dst, eDXRegI tmp, regXD src, eFlagsReg cr ) %{
11665 predicate(UseSSE>=2);
11666 match(Set dst (ConvD2I src));
11667 effect( KILL tmp, KILL cr );
11668 format %{ "CVTTSD2SI $dst, $src\n\t"
11669 "CMP $dst,0x80000000\n\t"
11670 "JNE,s fast\n\t"
11671 "SUB ESP, 8\n\t"
11672 "MOVSD [ESP], $src\n\t"
11673 "FLD_D [ESP]\n\t"
11674 "ADD ESP, 8\n\t"
11675 "CALL d2i_wrapper\n"
11676 "fast:" %}
11677 opcode(0x1); // double-precision conversion
11678 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11679 ins_pipe( pipe_slow );
11680 %}
11682 instruct convD2L_reg_reg( eADXRegL dst, regD src, eFlagsReg cr ) %{
11683 predicate(UseSSE<=1);
11684 match(Set dst (ConvD2L src));
11685 effect( KILL cr );
11686 format %{ "FLD $src\t# Convert double to long\n\t"
11687 "FLDCW trunc mode\n\t"
11688 "SUB ESP,8\n\t"
11689 "FISTp [ESP + #0]\n\t"
11690 "FLDCW std/24-bit mode\n\t"
11691 "POP EAX\n\t"
11692 "POP EDX\n\t"
11693 "CMP EDX,0x80000000\n\t"
11694 "JNE,s fast\n\t"
11695 "TEST EAX,EAX\n\t"
11696 "JNE,s fast\n\t"
11697 "FLD $src\n\t"
11698 "CALL d2l_wrapper\n"
11699 "fast:" %}
11700 ins_encode( Push_Reg_D(src), D2L_encoding(src) );
11701 ins_pipe( pipe_slow );
11702 %}
11704 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11705 instruct convXD2L_reg_reg( eADXRegL dst, regXD src, eFlagsReg cr ) %{
11706 predicate (UseSSE>=2);
11707 match(Set dst (ConvD2L src));
11708 effect( KILL cr );
11709 format %{ "SUB ESP,8\t# Convert double to long\n\t"
11710 "MOVSD [ESP],$src\n\t"
11711 "FLD_D [ESP]\n\t"
11712 "FLDCW trunc mode\n\t"
11713 "FISTp [ESP + #0]\n\t"
11714 "FLDCW std/24-bit mode\n\t"
11715 "POP EAX\n\t"
11716 "POP EDX\n\t"
11717 "CMP EDX,0x80000000\n\t"
11718 "JNE,s fast\n\t"
11719 "TEST EAX,EAX\n\t"
11720 "JNE,s fast\n\t"
11721 "SUB ESP,8\n\t"
11722 "MOVSD [ESP],$src\n\t"
11723 "FLD_D [ESP]\n\t"
11724 "CALL d2l_wrapper\n"
11725 "fast:" %}
11726 ins_encode( XD2L_encoding(src) );
11727 ins_pipe( pipe_slow );
11728 %}
11730 // Convert a double to an int. Java semantics require we do complex
11731 // manglations in the corner cases. So we set the rounding mode to
11732 // 'zero', store the darned double down as an int, and reset the
11733 // rounding mode to 'nearest'. The hardware stores a flag value down
11734 // if we would overflow or converted a NAN; we check for this and
11735 // and go the slow path if needed.
11736 instruct convF2I_reg_reg(eAXRegI dst, eDXRegI tmp, regF src, eFlagsReg cr ) %{
11737 predicate(UseSSE==0);
11738 match(Set dst (ConvF2I src));
11739 effect( KILL tmp, KILL cr );
11740 format %{ "FLD $src\t# Convert float to int \n\t"
11741 "FLDCW trunc mode\n\t"
11742 "SUB ESP,4\n\t"
11743 "FISTp [ESP + #0]\n\t"
11744 "FLDCW std/24-bit mode\n\t"
11745 "POP EAX\n\t"
11746 "CMP EAX,0x80000000\n\t"
11747 "JNE,s fast\n\t"
11748 "FLD $src\n\t"
11749 "CALL d2i_wrapper\n"
11750 "fast:" %}
11751 // D2I_encoding works for F2I
11752 ins_encode( Push_Reg_F(src), D2I_encoding(src) );
11753 ins_pipe( pipe_slow );
11754 %}
11756 // Convert a float in xmm to an int reg.
11757 instruct convX2I_reg(eAXRegI dst, eDXRegI tmp, regX src, eFlagsReg cr ) %{
11758 predicate(UseSSE>=1);
11759 match(Set dst (ConvF2I src));
11760 effect( KILL tmp, KILL cr );
11761 format %{ "CVTTSS2SI $dst, $src\n\t"
11762 "CMP $dst,0x80000000\n\t"
11763 "JNE,s fast\n\t"
11764 "SUB ESP, 4\n\t"
11765 "MOVSS [ESP], $src\n\t"
11766 "FLD [ESP]\n\t"
11767 "ADD ESP, 4\n\t"
11768 "CALL d2i_wrapper\n"
11769 "fast:" %}
11770 opcode(0x0); // single-precision conversion
11771 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x2C), FX2I_encoding(src,dst));
11772 ins_pipe( pipe_slow );
11773 %}
11775 instruct convF2L_reg_reg( eADXRegL dst, regF src, eFlagsReg cr ) %{
11776 predicate(UseSSE==0);
11777 match(Set dst (ConvF2L src));
11778 effect( KILL cr );
11779 format %{ "FLD $src\t# Convert float to long\n\t"
11780 "FLDCW trunc mode\n\t"
11781 "SUB ESP,8\n\t"
11782 "FISTp [ESP + #0]\n\t"
11783 "FLDCW std/24-bit mode\n\t"
11784 "POP EAX\n\t"
11785 "POP EDX\n\t"
11786 "CMP EDX,0x80000000\n\t"
11787 "JNE,s fast\n\t"
11788 "TEST EAX,EAX\n\t"
11789 "JNE,s fast\n\t"
11790 "FLD $src\n\t"
11791 "CALL d2l_wrapper\n"
11792 "fast:" %}
11793 // D2L_encoding works for F2L
11794 ins_encode( Push_Reg_F(src), D2L_encoding(src) );
11795 ins_pipe( pipe_slow );
11796 %}
11798 // XMM lacks a float/double->long conversion, so use the old FPU stack.
11799 instruct convX2L_reg_reg( eADXRegL dst, regX src, eFlagsReg cr ) %{
11800 predicate (UseSSE>=1);
11801 match(Set dst (ConvF2L src));
11802 effect( KILL cr );
11803 format %{ "SUB ESP,8\t# Convert float to long\n\t"
11804 "MOVSS [ESP],$src\n\t"
11805 "FLD_S [ESP]\n\t"
11806 "FLDCW trunc mode\n\t"
11807 "FISTp [ESP + #0]\n\t"
11808 "FLDCW std/24-bit mode\n\t"
11809 "POP EAX\n\t"
11810 "POP EDX\n\t"
11811 "CMP EDX,0x80000000\n\t"
11812 "JNE,s fast\n\t"
11813 "TEST EAX,EAX\n\t"
11814 "JNE,s fast\n\t"
11815 "SUB ESP,4\t# Convert float to long\n\t"
11816 "MOVSS [ESP],$src\n\t"
11817 "FLD_S [ESP]\n\t"
11818 "ADD ESP,4\n\t"
11819 "CALL d2l_wrapper\n"
11820 "fast:" %}
11821 ins_encode( X2L_encoding(src) );
11822 ins_pipe( pipe_slow );
11823 %}
11825 instruct convI2D_reg(regD dst, stackSlotI src) %{
11826 predicate( UseSSE<=1 );
11827 match(Set dst (ConvI2D src));
11828 format %{ "FILD $src\n\t"
11829 "FSTP $dst" %}
11830 opcode(0xDB, 0x0); /* DB /0 */
11831 ins_encode(Push_Mem_I(src), Pop_Reg_D(dst));
11832 ins_pipe( fpu_reg_mem );
11833 %}
11835 instruct convI2XD_reg(regXD dst, eRegI src) %{
11836 predicate( UseSSE>=2 && !UseXmmI2D );
11837 match(Set dst (ConvI2D src));
11838 format %{ "CVTSI2SD $dst,$src" %}
11839 opcode(0xF2, 0x0F, 0x2A);
11840 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11841 ins_pipe( pipe_slow );
11842 %}
11844 instruct convI2XD_mem(regXD dst, memory mem) %{
11845 predicate( UseSSE>=2 );
11846 match(Set dst (ConvI2D (LoadI mem)));
11847 format %{ "CVTSI2SD $dst,$mem" %}
11848 opcode(0xF2, 0x0F, 0x2A);
11849 ins_encode( OpcP, OpcS, Opcode(tertiary), RegMem(dst, mem));
11850 ins_pipe( pipe_slow );
11851 %}
11853 instruct convXI2XD_reg(regXD dst, eRegI src)
11854 %{
11855 predicate( UseSSE>=2 && UseXmmI2D );
11856 match(Set dst (ConvI2D src));
11858 format %{ "MOVD $dst,$src\n\t"
11859 "CVTDQ2PD $dst,$dst\t# i2d" %}
11860 ins_encode %{
11861 __ movdl($dst$$XMMRegister, $src$$Register);
11862 __ cvtdq2pd($dst$$XMMRegister, $dst$$XMMRegister);
11863 %}
11864 ins_pipe(pipe_slow); // XXX
11865 %}
11867 instruct convI2D_mem(regD dst, memory mem) %{
11868 predicate( UseSSE<=1 && !Compile::current()->select_24_bit_instr());
11869 match(Set dst (ConvI2D (LoadI mem)));
11870 format %{ "FILD $mem\n\t"
11871 "FSTP $dst" %}
11872 opcode(0xDB); /* DB /0 */
11873 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11874 Pop_Reg_D(dst));
11875 ins_pipe( fpu_reg_mem );
11876 %}
11878 // Convert a byte to a float; no rounding step needed.
11879 instruct conv24I2F_reg(regF dst, stackSlotI src) %{
11880 predicate( UseSSE==0 && n->in(1)->Opcode() == Op_AndI && n->in(1)->in(2)->is_Con() && n->in(1)->in(2)->get_int() == 255 );
11881 match(Set dst (ConvI2F src));
11882 format %{ "FILD $src\n\t"
11883 "FSTP $dst" %}
11885 opcode(0xDB, 0x0); /* DB /0 */
11886 ins_encode(Push_Mem_I(src), Pop_Reg_F(dst));
11887 ins_pipe( fpu_reg_mem );
11888 %}
11890 // In 24-bit mode, force exponent rounding by storing back out
11891 instruct convI2F_SSF(stackSlotF dst, stackSlotI src) %{
11892 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11893 match(Set dst (ConvI2F src));
11894 ins_cost(200);
11895 format %{ "FILD $src\n\t"
11896 "FSTP_S $dst" %}
11897 opcode(0xDB, 0x0); /* DB /0 */
11898 ins_encode( Push_Mem_I(src),
11899 Pop_Mem_F(dst));
11900 ins_pipe( fpu_mem_mem );
11901 %}
11903 // In 24-bit mode, force exponent rounding by storing back out
11904 instruct convI2F_SSF_mem(stackSlotF dst, memory mem) %{
11905 predicate( UseSSE==0 && Compile::current()->select_24_bit_instr());
11906 match(Set dst (ConvI2F (LoadI mem)));
11907 ins_cost(200);
11908 format %{ "FILD $mem\n\t"
11909 "FSTP_S $dst" %}
11910 opcode(0xDB); /* DB /0 */
11911 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11912 Pop_Mem_F(dst));
11913 ins_pipe( fpu_mem_mem );
11914 %}
11916 // This instruction does not round to 24-bits
11917 instruct convI2F_reg(regF dst, stackSlotI src) %{
11918 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11919 match(Set dst (ConvI2F src));
11920 format %{ "FILD $src\n\t"
11921 "FSTP $dst" %}
11922 opcode(0xDB, 0x0); /* DB /0 */
11923 ins_encode( Push_Mem_I(src),
11924 Pop_Reg_F(dst));
11925 ins_pipe( fpu_reg_mem );
11926 %}
11928 // This instruction does not round to 24-bits
11929 instruct convI2F_mem(regF dst, memory mem) %{
11930 predicate( UseSSE==0 && !Compile::current()->select_24_bit_instr());
11931 match(Set dst (ConvI2F (LoadI mem)));
11932 format %{ "FILD $mem\n\t"
11933 "FSTP $dst" %}
11934 opcode(0xDB); /* DB /0 */
11935 ins_encode( OpcP, RMopc_Mem(0x00,mem),
11936 Pop_Reg_F(dst));
11937 ins_pipe( fpu_reg_mem );
11938 %}
11940 // Convert an int to a float in xmm; no rounding step needed.
11941 instruct convI2X_reg(regX dst, eRegI src) %{
11942 predicate( UseSSE==1 || UseSSE>=2 && !UseXmmI2F );
11943 match(Set dst (ConvI2F src));
11944 format %{ "CVTSI2SS $dst, $src" %}
11946 opcode(0xF3, 0x0F, 0x2A); /* F3 0F 2A /r */
11947 ins_encode( OpcP, OpcS, Opcode(tertiary), RegReg(dst, src));
11948 ins_pipe( pipe_slow );
11949 %}
11951 instruct convXI2X_reg(regX dst, eRegI src)
11952 %{
11953 predicate( UseSSE>=2 && UseXmmI2F );
11954 match(Set dst (ConvI2F src));
11956 format %{ "MOVD $dst,$src\n\t"
11957 "CVTDQ2PS $dst,$dst\t# i2f" %}
11958 ins_encode %{
11959 __ movdl($dst$$XMMRegister, $src$$Register);
11960 __ cvtdq2ps($dst$$XMMRegister, $dst$$XMMRegister);
11961 %}
11962 ins_pipe(pipe_slow); // XXX
11963 %}
11965 instruct convI2L_reg( eRegL dst, eRegI src, eFlagsReg cr) %{
11966 match(Set dst (ConvI2L src));
11967 effect(KILL cr);
11968 ins_cost(375);
11969 format %{ "MOV $dst.lo,$src\n\t"
11970 "MOV $dst.hi,$src\n\t"
11971 "SAR $dst.hi,31" %}
11972 ins_encode(convert_int_long(dst,src));
11973 ins_pipe( ialu_reg_reg_long );
11974 %}
11976 // Zero-extend convert int to long
11977 instruct convI2L_reg_zex(eRegL dst, eRegI src, immL_32bits mask, eFlagsReg flags ) %{
11978 match(Set dst (AndL (ConvI2L src) mask) );
11979 effect( KILL flags );
11980 ins_cost(250);
11981 format %{ "MOV $dst.lo,$src\n\t"
11982 "XOR $dst.hi,$dst.hi" %}
11983 opcode(0x33); // XOR
11984 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11985 ins_pipe( ialu_reg_reg_long );
11986 %}
11988 // Zero-extend long
11989 instruct zerox_long(eRegL dst, eRegL src, immL_32bits mask, eFlagsReg flags ) %{
11990 match(Set dst (AndL src mask) );
11991 effect( KILL flags );
11992 ins_cost(250);
11993 format %{ "MOV $dst.lo,$src.lo\n\t"
11994 "XOR $dst.hi,$dst.hi\n\t" %}
11995 opcode(0x33); // XOR
11996 ins_encode(enc_Copy(dst,src), OpcP, RegReg_Hi2(dst,dst) );
11997 ins_pipe( ialu_reg_reg_long );
11998 %}
12000 instruct convL2D_reg( stackSlotD dst, eRegL src, eFlagsReg cr) %{
12001 predicate (UseSSE<=1);
12002 match(Set dst (ConvL2D src));
12003 effect( KILL cr );
12004 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12005 "PUSH $src.lo\n\t"
12006 "FILD ST,[ESP + #0]\n\t"
12007 "ADD ESP,8\n\t"
12008 "FSTP_D $dst\t# D-round" %}
12009 opcode(0xDF, 0x5); /* DF /5 */
12010 ins_encode(convert_long_double(src), Pop_Mem_D(dst));
12011 ins_pipe( pipe_slow );
12012 %}
12014 instruct convL2XD_reg( regXD dst, eRegL src, eFlagsReg cr) %{
12015 predicate (UseSSE>=2);
12016 match(Set dst (ConvL2D src));
12017 effect( KILL cr );
12018 format %{ "PUSH $src.hi\t# Convert long to double\n\t"
12019 "PUSH $src.lo\n\t"
12020 "FILD_D [ESP]\n\t"
12021 "FSTP_D [ESP]\n\t"
12022 "MOVSD $dst,[ESP]\n\t"
12023 "ADD ESP,8" %}
12024 opcode(0xDF, 0x5); /* DF /5 */
12025 ins_encode(convert_long_double2(src), Push_ResultXD(dst));
12026 ins_pipe( pipe_slow );
12027 %}
12029 instruct convL2X_reg( regX dst, eRegL src, eFlagsReg cr) %{
12030 predicate (UseSSE>=1);
12031 match(Set dst (ConvL2F src));
12032 effect( KILL cr );
12033 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12034 "PUSH $src.lo\n\t"
12035 "FILD_D [ESP]\n\t"
12036 "FSTP_S [ESP]\n\t"
12037 "MOVSS $dst,[ESP]\n\t"
12038 "ADD ESP,8" %}
12039 opcode(0xDF, 0x5); /* DF /5 */
12040 ins_encode(convert_long_double2(src), Push_ResultX(dst,0x8));
12041 ins_pipe( pipe_slow );
12042 %}
12044 instruct convL2F_reg( stackSlotF dst, eRegL src, eFlagsReg cr) %{
12045 match(Set dst (ConvL2F src));
12046 effect( KILL cr );
12047 format %{ "PUSH $src.hi\t# Convert long to single float\n\t"
12048 "PUSH $src.lo\n\t"
12049 "FILD ST,[ESP + #0]\n\t"
12050 "ADD ESP,8\n\t"
12051 "FSTP_S $dst\t# F-round" %}
12052 opcode(0xDF, 0x5); /* DF /5 */
12053 ins_encode(convert_long_double(src), Pop_Mem_F(dst));
12054 ins_pipe( pipe_slow );
12055 %}
12057 instruct convL2I_reg( eRegI dst, eRegL src ) %{
12058 match(Set dst (ConvL2I src));
12059 effect( DEF dst, USE src );
12060 format %{ "MOV $dst,$src.lo" %}
12061 ins_encode(enc_CopyL_Lo(dst,src));
12062 ins_pipe( ialu_reg_reg );
12063 %}
12066 instruct MoveF2I_stack_reg(eRegI dst, stackSlotF src) %{
12067 match(Set dst (MoveF2I src));
12068 effect( DEF dst, USE src );
12069 ins_cost(100);
12070 format %{ "MOV $dst,$src\t# MoveF2I_stack_reg" %}
12071 opcode(0x8B);
12072 ins_encode( OpcP, RegMem(dst,src));
12073 ins_pipe( ialu_reg_mem );
12074 %}
12076 instruct MoveF2I_reg_stack(stackSlotI dst, regF src) %{
12077 predicate(UseSSE==0);
12078 match(Set dst (MoveF2I src));
12079 effect( DEF dst, USE src );
12081 ins_cost(125);
12082 format %{ "FST_S $dst,$src\t# MoveF2I_reg_stack" %}
12083 ins_encode( Pop_Mem_Reg_F(dst, src) );
12084 ins_pipe( fpu_mem_reg );
12085 %}
12087 instruct MoveF2I_reg_stack_sse(stackSlotI dst, regX src) %{
12088 predicate(UseSSE>=1);
12089 match(Set dst (MoveF2I src));
12090 effect( DEF dst, USE src );
12092 ins_cost(95);
12093 format %{ "MOVSS $dst,$src\t# MoveF2I_reg_stack_sse" %}
12094 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x11), RegMem(src, dst));
12095 ins_pipe( pipe_slow );
12096 %}
12098 instruct MoveF2I_reg_reg_sse(eRegI dst, regX src) %{
12099 predicate(UseSSE>=2);
12100 match(Set dst (MoveF2I src));
12101 effect( DEF dst, USE src );
12102 ins_cost(85);
12103 format %{ "MOVD $dst,$src\t# MoveF2I_reg_reg_sse" %}
12104 ins_encode( MovX2I_reg(dst, src));
12105 ins_pipe( pipe_slow );
12106 %}
12108 instruct MoveI2F_reg_stack(stackSlotF dst, eRegI src) %{
12109 match(Set dst (MoveI2F src));
12110 effect( DEF dst, USE src );
12112 ins_cost(100);
12113 format %{ "MOV $dst,$src\t# MoveI2F_reg_stack" %}
12114 opcode(0x89);
12115 ins_encode( OpcPRegSS( dst, src ) );
12116 ins_pipe( ialu_mem_reg );
12117 %}
12120 instruct MoveI2F_stack_reg(regF dst, stackSlotI src) %{
12121 predicate(UseSSE==0);
12122 match(Set dst (MoveI2F src));
12123 effect(DEF dst, USE src);
12125 ins_cost(125);
12126 format %{ "FLD_S $src\n\t"
12127 "FSTP $dst\t# MoveI2F_stack_reg" %}
12128 opcode(0xD9); /* D9 /0, FLD m32real */
12129 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12130 Pop_Reg_F(dst) );
12131 ins_pipe( fpu_reg_mem );
12132 %}
12134 instruct MoveI2F_stack_reg_sse(regX dst, stackSlotI src) %{
12135 predicate(UseSSE>=1);
12136 match(Set dst (MoveI2F src));
12137 effect( DEF dst, USE src );
12139 ins_cost(95);
12140 format %{ "MOVSS $dst,$src\t# MoveI2F_stack_reg_sse" %}
12141 ins_encode( Opcode(0xF3), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12142 ins_pipe( pipe_slow );
12143 %}
12145 instruct MoveI2F_reg_reg_sse(regX dst, eRegI src) %{
12146 predicate(UseSSE>=2);
12147 match(Set dst (MoveI2F src));
12148 effect( DEF dst, USE src );
12150 ins_cost(85);
12151 format %{ "MOVD $dst,$src\t# MoveI2F_reg_reg_sse" %}
12152 ins_encode( MovI2X_reg(dst, src) );
12153 ins_pipe( pipe_slow );
12154 %}
12156 instruct MoveD2L_stack_reg(eRegL dst, stackSlotD src) %{
12157 match(Set dst (MoveD2L src));
12158 effect(DEF dst, USE src);
12160 ins_cost(250);
12161 format %{ "MOV $dst.lo,$src\n\t"
12162 "MOV $dst.hi,$src+4\t# MoveD2L_stack_reg" %}
12163 opcode(0x8B, 0x8B);
12164 ins_encode( OpcP, RegMem(dst,src), OpcS, RegMem_Hi(dst,src));
12165 ins_pipe( ialu_mem_long_reg );
12166 %}
12168 instruct MoveD2L_reg_stack(stackSlotL dst, regD src) %{
12169 predicate(UseSSE<=1);
12170 match(Set dst (MoveD2L src));
12171 effect(DEF dst, USE src);
12173 ins_cost(125);
12174 format %{ "FST_D $dst,$src\t# MoveD2L_reg_stack" %}
12175 ins_encode( Pop_Mem_Reg_D(dst, src) );
12176 ins_pipe( fpu_mem_reg );
12177 %}
12179 instruct MoveD2L_reg_stack_sse(stackSlotL dst, regXD src) %{
12180 predicate(UseSSE>=2);
12181 match(Set dst (MoveD2L src));
12182 effect(DEF dst, USE src);
12183 ins_cost(95);
12185 format %{ "MOVSD $dst,$src\t# MoveD2L_reg_stack_sse" %}
12186 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x11), RegMem(src,dst));
12187 ins_pipe( pipe_slow );
12188 %}
12190 instruct MoveD2L_reg_reg_sse(eRegL dst, regXD src, regXD tmp) %{
12191 predicate(UseSSE>=2);
12192 match(Set dst (MoveD2L src));
12193 effect(DEF dst, USE src, TEMP tmp);
12194 ins_cost(85);
12195 format %{ "MOVD $dst.lo,$src\n\t"
12196 "PSHUFLW $tmp,$src,0x4E\n\t"
12197 "MOVD $dst.hi,$tmp\t# MoveD2L_reg_reg_sse" %}
12198 ins_encode( MovXD2L_reg(dst, src, tmp) );
12199 ins_pipe( pipe_slow );
12200 %}
12202 instruct MoveL2D_reg_stack(stackSlotD dst, eRegL src) %{
12203 match(Set dst (MoveL2D src));
12204 effect(DEF dst, USE src);
12206 ins_cost(200);
12207 format %{ "MOV $dst,$src.lo\n\t"
12208 "MOV $dst+4,$src.hi\t# MoveL2D_reg_stack" %}
12209 opcode(0x89, 0x89);
12210 ins_encode( OpcP, RegMem( src, dst ), OpcS, RegMem_Hi( src, dst ) );
12211 ins_pipe( ialu_mem_long_reg );
12212 %}
12215 instruct MoveL2D_stack_reg(regD dst, stackSlotL src) %{
12216 predicate(UseSSE<=1);
12217 match(Set dst (MoveL2D src));
12218 effect(DEF dst, USE src);
12219 ins_cost(125);
12221 format %{ "FLD_D $src\n\t"
12222 "FSTP $dst\t# MoveL2D_stack_reg" %}
12223 opcode(0xDD); /* DD /0, FLD m64real */
12224 ins_encode( OpcP, RMopc_Mem_no_oop(0x00,src),
12225 Pop_Reg_D(dst) );
12226 ins_pipe( fpu_reg_mem );
12227 %}
12230 instruct MoveL2D_stack_reg_sse(regXD dst, stackSlotL src) %{
12231 predicate(UseSSE>=2 && UseXmmLoadAndClearUpper);
12232 match(Set dst (MoveL2D src));
12233 effect(DEF dst, USE src);
12235 ins_cost(95);
12236 format %{ "MOVSD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12237 ins_encode( Opcode(0xF2), Opcode(0x0F), Opcode(0x10), RegMem(dst,src));
12238 ins_pipe( pipe_slow );
12239 %}
12241 instruct MoveL2D_stack_reg_sse_partial(regXD dst, stackSlotL src) %{
12242 predicate(UseSSE>=2 && !UseXmmLoadAndClearUpper);
12243 match(Set dst (MoveL2D src));
12244 effect(DEF dst, USE src);
12246 ins_cost(95);
12247 format %{ "MOVLPD $dst,$src\t# MoveL2D_stack_reg_sse" %}
12248 ins_encode( Opcode(0x66), Opcode(0x0F), Opcode(0x12), RegMem(dst,src));
12249 ins_pipe( pipe_slow );
12250 %}
12252 instruct MoveL2D_reg_reg_sse(regXD dst, eRegL src, regXD tmp) %{
12253 predicate(UseSSE>=2);
12254 match(Set dst (MoveL2D src));
12255 effect(TEMP dst, USE src, TEMP tmp);
12256 ins_cost(85);
12257 format %{ "MOVD $dst,$src.lo\n\t"
12258 "MOVD $tmp,$src.hi\n\t"
12259 "PUNPCKLDQ $dst,$tmp\t# MoveL2D_reg_reg_sse" %}
12260 ins_encode( MovL2XD_reg(dst, src, tmp) );
12261 ins_pipe( pipe_slow );
12262 %}
12264 // Replicate scalar to packed byte (1 byte) values in xmm
12265 instruct Repl8B_reg(regXD dst, regXD src) %{
12266 predicate(UseSSE>=2);
12267 match(Set dst (Replicate8B src));
12268 format %{ "MOVDQA $dst,$src\n\t"
12269 "PUNPCKLBW $dst,$dst\n\t"
12270 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12271 ins_encode( pshufd_8x8(dst, src));
12272 ins_pipe( pipe_slow );
12273 %}
12275 // Replicate scalar to packed byte (1 byte) values in xmm
12276 instruct Repl8B_eRegI(regXD dst, eRegI src) %{
12277 predicate(UseSSE>=2);
12278 match(Set dst (Replicate8B src));
12279 format %{ "MOVD $dst,$src\n\t"
12280 "PUNPCKLBW $dst,$dst\n\t"
12281 "PSHUFLW $dst,$dst,0x00\t! replicate8B" %}
12282 ins_encode( mov_i2x(dst, src), pshufd_8x8(dst, dst));
12283 ins_pipe( pipe_slow );
12284 %}
12286 // Replicate scalar zero to packed byte (1 byte) values in xmm
12287 instruct Repl8B_immI0(regXD dst, immI0 zero) %{
12288 predicate(UseSSE>=2);
12289 match(Set dst (Replicate8B zero));
12290 format %{ "PXOR $dst,$dst\t! replicate8B" %}
12291 ins_encode( pxor(dst, dst));
12292 ins_pipe( fpu_reg_reg );
12293 %}
12295 // Replicate scalar to packed shore (2 byte) values in xmm
12296 instruct Repl4S_reg(regXD dst, regXD src) %{
12297 predicate(UseSSE>=2);
12298 match(Set dst (Replicate4S src));
12299 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4S" %}
12300 ins_encode( pshufd_4x16(dst, src));
12301 ins_pipe( fpu_reg_reg );
12302 %}
12304 // Replicate scalar to packed shore (2 byte) values in xmm
12305 instruct Repl4S_eRegI(regXD dst, eRegI src) %{
12306 predicate(UseSSE>=2);
12307 match(Set dst (Replicate4S src));
12308 format %{ "MOVD $dst,$src\n\t"
12309 "PSHUFLW $dst,$dst,0x00\t! replicate4S" %}
12310 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12311 ins_pipe( fpu_reg_reg );
12312 %}
12314 // Replicate scalar zero to packed short (2 byte) values in xmm
12315 instruct Repl4S_immI0(regXD dst, immI0 zero) %{
12316 predicate(UseSSE>=2);
12317 match(Set dst (Replicate4S zero));
12318 format %{ "PXOR $dst,$dst\t! replicate4S" %}
12319 ins_encode( pxor(dst, dst));
12320 ins_pipe( fpu_reg_reg );
12321 %}
12323 // Replicate scalar to packed char (2 byte) values in xmm
12324 instruct Repl4C_reg(regXD dst, regXD src) %{
12325 predicate(UseSSE>=2);
12326 match(Set dst (Replicate4C src));
12327 format %{ "PSHUFLW $dst,$src,0x00\t! replicate4C" %}
12328 ins_encode( pshufd_4x16(dst, src));
12329 ins_pipe( fpu_reg_reg );
12330 %}
12332 // Replicate scalar to packed char (2 byte) values in xmm
12333 instruct Repl4C_eRegI(regXD dst, eRegI src) %{
12334 predicate(UseSSE>=2);
12335 match(Set dst (Replicate4C src));
12336 format %{ "MOVD $dst,$src\n\t"
12337 "PSHUFLW $dst,$dst,0x00\t! replicate4C" %}
12338 ins_encode( mov_i2x(dst, src), pshufd_4x16(dst, dst));
12339 ins_pipe( fpu_reg_reg );
12340 %}
12342 // Replicate scalar zero to packed char (2 byte) values in xmm
12343 instruct Repl4C_immI0(regXD dst, immI0 zero) %{
12344 predicate(UseSSE>=2);
12345 match(Set dst (Replicate4C zero));
12346 format %{ "PXOR $dst,$dst\t! replicate4C" %}
12347 ins_encode( pxor(dst, dst));
12348 ins_pipe( fpu_reg_reg );
12349 %}
12351 // Replicate scalar to packed integer (4 byte) values in xmm
12352 instruct Repl2I_reg(regXD dst, regXD src) %{
12353 predicate(UseSSE>=2);
12354 match(Set dst (Replicate2I src));
12355 format %{ "PSHUFD $dst,$src,0x00\t! replicate2I" %}
12356 ins_encode( pshufd(dst, src, 0x00));
12357 ins_pipe( fpu_reg_reg );
12358 %}
12360 // Replicate scalar to packed integer (4 byte) values in xmm
12361 instruct Repl2I_eRegI(regXD dst, eRegI src) %{
12362 predicate(UseSSE>=2);
12363 match(Set dst (Replicate2I src));
12364 format %{ "MOVD $dst,$src\n\t"
12365 "PSHUFD $dst,$dst,0x00\t! replicate2I" %}
12366 ins_encode( mov_i2x(dst, src), pshufd(dst, dst, 0x00));
12367 ins_pipe( fpu_reg_reg );
12368 %}
12370 // Replicate scalar zero to packed integer (2 byte) values in xmm
12371 instruct Repl2I_immI0(regXD dst, immI0 zero) %{
12372 predicate(UseSSE>=2);
12373 match(Set dst (Replicate2I zero));
12374 format %{ "PXOR $dst,$dst\t! replicate2I" %}
12375 ins_encode( pxor(dst, dst));
12376 ins_pipe( fpu_reg_reg );
12377 %}
12379 // Replicate scalar to packed single precision floating point values in xmm
12380 instruct Repl2F_reg(regXD dst, regXD src) %{
12381 predicate(UseSSE>=2);
12382 match(Set dst (Replicate2F src));
12383 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12384 ins_encode( pshufd(dst, src, 0xe0));
12385 ins_pipe( fpu_reg_reg );
12386 %}
12388 // Replicate scalar to packed single precision floating point values in xmm
12389 instruct Repl2F_regX(regXD dst, regX src) %{
12390 predicate(UseSSE>=2);
12391 match(Set dst (Replicate2F src));
12392 format %{ "PSHUFD $dst,$src,0xe0\t! replicate2F" %}
12393 ins_encode( pshufd(dst, src, 0xe0));
12394 ins_pipe( fpu_reg_reg );
12395 %}
12397 // Replicate scalar to packed single precision floating point values in xmm
12398 instruct Repl2F_immXF0(regXD dst, immXF0 zero) %{
12399 predicate(UseSSE>=2);
12400 match(Set dst (Replicate2F zero));
12401 format %{ "PXOR $dst,$dst\t! replicate2F" %}
12402 ins_encode( pxor(dst, dst));
12403 ins_pipe( fpu_reg_reg );
12404 %}
12406 // =======================================================================
12407 // fast clearing of an array
12408 instruct rep_stos(eCXRegI cnt, eDIRegP base, eAXRegI zero, Universe dummy, eFlagsReg cr) %{
12409 match(Set dummy (ClearArray cnt base));
12410 effect(USE_KILL cnt, USE_KILL base, KILL zero, KILL cr);
12411 format %{ "SHL ECX,1\t# Convert doublewords to words\n\t"
12412 "XOR EAX,EAX\n\t"
12413 "REP STOS\t# store EAX into [EDI++] while ECX--" %}
12414 opcode(0,0x4);
12415 ins_encode( Opcode(0xD1), RegOpc(ECX),
12416 OpcRegReg(0x33,EAX,EAX),
12417 Opcode(0xF3), Opcode(0xAB) );
12418 ins_pipe( pipe_slow );
12419 %}
12421 instruct string_compare(eDIRegP str1, eCXRegI cnt1, eSIRegP str2, eBXRegI cnt2,
12422 eAXRegI result, regXD tmp1, regXD tmp2, eFlagsReg cr) %{
12423 match(Set result (StrComp (Binary str1 cnt1) (Binary str2 cnt2)));
12424 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL cr);
12426 format %{ "String Compare $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp1, $tmp2" %}
12427 ins_encode %{
12428 __ string_compare($str1$$Register, $str2$$Register,
12429 $cnt1$$Register, $cnt2$$Register, $result$$Register,
12430 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12431 %}
12432 ins_pipe( pipe_slow );
12433 %}
12435 // fast string equals
12436 instruct string_equals(eDIRegP str1, eSIRegP str2, eCXRegI cnt, eAXRegI result,
12437 regXD tmp1, regXD tmp2, eBXRegI tmp3, eFlagsReg cr) %{
12438 match(Set result (StrEquals (Binary str1 str2) cnt));
12439 effect(TEMP tmp1, TEMP tmp2, USE_KILL str1, USE_KILL str2, USE_KILL cnt, KILL tmp3, KILL cr);
12441 format %{ "String Equals $str1,$str2,$cnt -> $result // KILL $tmp1, $tmp2, $tmp3" %}
12442 ins_encode %{
12443 __ char_arrays_equals(false, $str1$$Register, $str2$$Register,
12444 $cnt$$Register, $result$$Register, $tmp3$$Register,
12445 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12446 %}
12447 ins_pipe( pipe_slow );
12448 %}
12450 instruct string_indexof(eDIRegP str1, eDXRegI cnt1, eSIRegP str2, eAXRegI cnt2,
12451 eBXRegI result, regXD tmp1, eCXRegI tmp2, eFlagsReg cr) %{
12452 predicate(UseSSE42Intrinsics);
12453 match(Set result (StrIndexOf (Binary str1 cnt1) (Binary str2 cnt2)));
12454 effect(TEMP tmp1, USE_KILL str1, USE_KILL str2, USE_KILL cnt1, USE_KILL cnt2, KILL tmp2, KILL cr);
12456 format %{ "String IndexOf $str1,$cnt1,$str2,$cnt2 -> $result // KILL $tmp2, $tmp1" %}
12457 ins_encode %{
12458 __ string_indexof($str1$$Register, $str2$$Register,
12459 $cnt1$$Register, $cnt2$$Register, $result$$Register,
12460 $tmp1$$XMMRegister, $tmp2$$Register);
12461 %}
12462 ins_pipe( pipe_slow );
12463 %}
12465 // fast array equals
12466 instruct array_equals(eDIRegP ary1, eSIRegP ary2, eAXRegI result,
12467 regXD tmp1, regXD tmp2, eCXRegI tmp3, eBXRegI tmp4, eFlagsReg cr)
12468 %{
12469 match(Set result (AryEq ary1 ary2));
12470 effect(TEMP tmp1, TEMP tmp2, USE_KILL ary1, USE_KILL ary2, KILL tmp3, KILL tmp4, KILL cr);
12471 //ins_cost(300);
12473 format %{ "Array Equals $ary1,$ary2 -> $result // KILL $tmp1, $tmp2, $tmp3, $tmp4" %}
12474 ins_encode %{
12475 __ char_arrays_equals(true, $ary1$$Register, $ary2$$Register,
12476 $tmp3$$Register, $result$$Register, $tmp4$$Register,
12477 $tmp1$$XMMRegister, $tmp2$$XMMRegister);
12478 %}
12479 ins_pipe( pipe_slow );
12480 %}
12482 //----------Control Flow Instructions------------------------------------------
12483 // Signed compare Instructions
12484 instruct compI_eReg(eFlagsReg cr, eRegI op1, eRegI op2) %{
12485 match(Set cr (CmpI op1 op2));
12486 effect( DEF cr, USE op1, USE op2 );
12487 format %{ "CMP $op1,$op2" %}
12488 opcode(0x3B); /* Opcode 3B /r */
12489 ins_encode( OpcP, RegReg( op1, op2) );
12490 ins_pipe( ialu_cr_reg_reg );
12491 %}
12493 instruct compI_eReg_imm(eFlagsReg cr, eRegI op1, immI op2) %{
12494 match(Set cr (CmpI op1 op2));
12495 effect( DEF cr, USE op1 );
12496 format %{ "CMP $op1,$op2" %}
12497 opcode(0x81,0x07); /* Opcode 81 /7 */
12498 // ins_encode( RegImm( op1, op2) ); /* Was CmpImm */
12499 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12500 ins_pipe( ialu_cr_reg_imm );
12501 %}
12503 // Cisc-spilled version of cmpI_eReg
12504 instruct compI_eReg_mem(eFlagsReg cr, eRegI op1, memory op2) %{
12505 match(Set cr (CmpI op1 (LoadI op2)));
12507 format %{ "CMP $op1,$op2" %}
12508 ins_cost(500);
12509 opcode(0x3B); /* Opcode 3B /r */
12510 ins_encode( OpcP, RegMem( op1, op2) );
12511 ins_pipe( ialu_cr_reg_mem );
12512 %}
12514 instruct testI_reg( eFlagsReg cr, eRegI src, immI0 zero ) %{
12515 match(Set cr (CmpI src zero));
12516 effect( DEF cr, USE src );
12518 format %{ "TEST $src,$src" %}
12519 opcode(0x85);
12520 ins_encode( OpcP, RegReg( src, src ) );
12521 ins_pipe( ialu_cr_reg_imm );
12522 %}
12524 instruct testI_reg_imm( eFlagsReg cr, eRegI src, immI con, immI0 zero ) %{
12525 match(Set cr (CmpI (AndI src con) zero));
12527 format %{ "TEST $src,$con" %}
12528 opcode(0xF7,0x00);
12529 ins_encode( OpcP, RegOpc(src), Con32(con) );
12530 ins_pipe( ialu_cr_reg_imm );
12531 %}
12533 instruct testI_reg_mem( eFlagsReg cr, eRegI src, memory mem, immI0 zero ) %{
12534 match(Set cr (CmpI (AndI src mem) zero));
12536 format %{ "TEST $src,$mem" %}
12537 opcode(0x85);
12538 ins_encode( OpcP, RegMem( src, mem ) );
12539 ins_pipe( ialu_cr_reg_mem );
12540 %}
12542 // Unsigned compare Instructions; really, same as signed except they
12543 // produce an eFlagsRegU instead of eFlagsReg.
12544 instruct compU_eReg(eFlagsRegU cr, eRegI op1, eRegI op2) %{
12545 match(Set cr (CmpU op1 op2));
12547 format %{ "CMPu $op1,$op2" %}
12548 opcode(0x3B); /* Opcode 3B /r */
12549 ins_encode( OpcP, RegReg( op1, op2) );
12550 ins_pipe( ialu_cr_reg_reg );
12551 %}
12553 instruct compU_eReg_imm(eFlagsRegU cr, eRegI op1, immI op2) %{
12554 match(Set cr (CmpU op1 op2));
12556 format %{ "CMPu $op1,$op2" %}
12557 opcode(0x81,0x07); /* Opcode 81 /7 */
12558 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12559 ins_pipe( ialu_cr_reg_imm );
12560 %}
12562 // // Cisc-spilled version of cmpU_eReg
12563 instruct compU_eReg_mem(eFlagsRegU cr, eRegI op1, memory op2) %{
12564 match(Set cr (CmpU op1 (LoadI op2)));
12566 format %{ "CMPu $op1,$op2" %}
12567 ins_cost(500);
12568 opcode(0x3B); /* Opcode 3B /r */
12569 ins_encode( OpcP, RegMem( op1, op2) );
12570 ins_pipe( ialu_cr_reg_mem );
12571 %}
12573 // // Cisc-spilled version of cmpU_eReg
12574 //instruct compU_mem_eReg(eFlagsRegU cr, memory op1, eRegI op2) %{
12575 // match(Set cr (CmpU (LoadI op1) op2));
12576 //
12577 // format %{ "CMPu $op1,$op2" %}
12578 // ins_cost(500);
12579 // opcode(0x39); /* Opcode 39 /r */
12580 // ins_encode( OpcP, RegMem( op1, op2) );
12581 //%}
12583 instruct testU_reg( eFlagsRegU cr, eRegI src, immI0 zero ) %{
12584 match(Set cr (CmpU src zero));
12586 format %{ "TESTu $src,$src" %}
12587 opcode(0x85);
12588 ins_encode( OpcP, RegReg( src, src ) );
12589 ins_pipe( ialu_cr_reg_imm );
12590 %}
12592 // Unsigned pointer compare Instructions
12593 instruct compP_eReg(eFlagsRegU cr, eRegP op1, eRegP op2) %{
12594 match(Set cr (CmpP op1 op2));
12596 format %{ "CMPu $op1,$op2" %}
12597 opcode(0x3B); /* Opcode 3B /r */
12598 ins_encode( OpcP, RegReg( op1, op2) );
12599 ins_pipe( ialu_cr_reg_reg );
12600 %}
12602 instruct compP_eReg_imm(eFlagsRegU cr, eRegP op1, immP op2) %{
12603 match(Set cr (CmpP op1 op2));
12605 format %{ "CMPu $op1,$op2" %}
12606 opcode(0x81,0x07); /* Opcode 81 /7 */
12607 ins_encode( OpcSErm( op1, op2 ), Con8or32( op2 ) );
12608 ins_pipe( ialu_cr_reg_imm );
12609 %}
12611 // // Cisc-spilled version of cmpP_eReg
12612 instruct compP_eReg_mem(eFlagsRegU cr, eRegP op1, memory op2) %{
12613 match(Set cr (CmpP op1 (LoadP op2)));
12615 format %{ "CMPu $op1,$op2" %}
12616 ins_cost(500);
12617 opcode(0x3B); /* Opcode 3B /r */
12618 ins_encode( OpcP, RegMem( op1, op2) );
12619 ins_pipe( ialu_cr_reg_mem );
12620 %}
12622 // // Cisc-spilled version of cmpP_eReg
12623 //instruct compP_mem_eReg(eFlagsRegU cr, memory op1, eRegP op2) %{
12624 // match(Set cr (CmpP (LoadP op1) op2));
12625 //
12626 // format %{ "CMPu $op1,$op2" %}
12627 // ins_cost(500);
12628 // opcode(0x39); /* Opcode 39 /r */
12629 // ins_encode( OpcP, RegMem( op1, op2) );
12630 //%}
12632 // Compare raw pointer (used in out-of-heap check).
12633 // Only works because non-oop pointers must be raw pointers
12634 // and raw pointers have no anti-dependencies.
12635 instruct compP_mem_eReg( eFlagsRegU cr, eRegP op1, memory op2 ) %{
12636 predicate( !n->in(2)->in(2)->bottom_type()->isa_oop_ptr() );
12637 match(Set cr (CmpP op1 (LoadP op2)));
12639 format %{ "CMPu $op1,$op2" %}
12640 opcode(0x3B); /* Opcode 3B /r */
12641 ins_encode( OpcP, RegMem( op1, op2) );
12642 ins_pipe( ialu_cr_reg_mem );
12643 %}
12645 //
12646 // This will generate a signed flags result. This should be ok
12647 // since any compare to a zero should be eq/neq.
12648 instruct testP_reg( eFlagsReg cr, eRegP src, immP0 zero ) %{
12649 match(Set cr (CmpP src zero));
12651 format %{ "TEST $src,$src" %}
12652 opcode(0x85);
12653 ins_encode( OpcP, RegReg( src, src ) );
12654 ins_pipe( ialu_cr_reg_imm );
12655 %}
12657 // Cisc-spilled version of testP_reg
12658 // This will generate a signed flags result. This should be ok
12659 // since any compare to a zero should be eq/neq.
12660 instruct testP_Reg_mem( eFlagsReg cr, memory op, immI0 zero ) %{
12661 match(Set cr (CmpP (LoadP op) zero));
12663 format %{ "TEST $op,0xFFFFFFFF" %}
12664 ins_cost(500);
12665 opcode(0xF7); /* Opcode F7 /0 */
12666 ins_encode( OpcP, RMopc_Mem(0x00,op), Con_d32(0xFFFFFFFF) );
12667 ins_pipe( ialu_cr_reg_imm );
12668 %}
12670 // Yanked all unsigned pointer compare operations.
12671 // Pointer compares are done with CmpP which is already unsigned.
12673 //----------Max and Min--------------------------------------------------------
12674 // Min Instructions
12675 ////
12676 // *** Min and Max using the conditional move are slower than the
12677 // *** branch version on a Pentium III.
12678 // // Conditional move for min
12679 //instruct cmovI_reg_lt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12680 // effect( USE_DEF op2, USE op1, USE cr );
12681 // format %{ "CMOVlt $op2,$op1\t! min" %}
12682 // opcode(0x4C,0x0F);
12683 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12684 // ins_pipe( pipe_cmov_reg );
12685 //%}
12686 //
12687 //// Min Register with Register (P6 version)
12688 //instruct minI_eReg_p6( eRegI op1, eRegI op2 ) %{
12689 // predicate(VM_Version::supports_cmov() );
12690 // match(Set op2 (MinI op1 op2));
12691 // ins_cost(200);
12692 // expand %{
12693 // eFlagsReg cr;
12694 // compI_eReg(cr,op1,op2);
12695 // cmovI_reg_lt(op2,op1,cr);
12696 // %}
12697 //%}
12699 // Min Register with Register (generic version)
12700 instruct minI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12701 match(Set dst (MinI dst src));
12702 effect(KILL flags);
12703 ins_cost(300);
12705 format %{ "MIN $dst,$src" %}
12706 opcode(0xCC);
12707 ins_encode( min_enc(dst,src) );
12708 ins_pipe( pipe_slow );
12709 %}
12711 // Max Register with Register
12712 // *** Min and Max using the conditional move are slower than the
12713 // *** branch version on a Pentium III.
12714 // // Conditional move for max
12715 //instruct cmovI_reg_gt( eRegI op2, eRegI op1, eFlagsReg cr ) %{
12716 // effect( USE_DEF op2, USE op1, USE cr );
12717 // format %{ "CMOVgt $op2,$op1\t! max" %}
12718 // opcode(0x4F,0x0F);
12719 // ins_encode( OpcS, OpcP, RegReg( op2, op1 ) );
12720 // ins_pipe( pipe_cmov_reg );
12721 //%}
12722 //
12723 // // Max Register with Register (P6 version)
12724 //instruct maxI_eReg_p6( eRegI op1, eRegI op2 ) %{
12725 // predicate(VM_Version::supports_cmov() );
12726 // match(Set op2 (MaxI op1 op2));
12727 // ins_cost(200);
12728 // expand %{
12729 // eFlagsReg cr;
12730 // compI_eReg(cr,op1,op2);
12731 // cmovI_reg_gt(op2,op1,cr);
12732 // %}
12733 //%}
12735 // Max Register with Register (generic version)
12736 instruct maxI_eReg(eRegI dst, eRegI src, eFlagsReg flags) %{
12737 match(Set dst (MaxI dst src));
12738 effect(KILL flags);
12739 ins_cost(300);
12741 format %{ "MAX $dst,$src" %}
12742 opcode(0xCC);
12743 ins_encode( max_enc(dst,src) );
12744 ins_pipe( pipe_slow );
12745 %}
12747 // ============================================================================
12748 // Branch Instructions
12749 // Jump Table
12750 instruct jumpXtnd(eRegI switch_val) %{
12751 match(Jump switch_val);
12752 ins_cost(350);
12754 format %{ "JMP [table_base](,$switch_val,1)\n\t" %}
12756 ins_encode %{
12757 address table_base = __ address_table_constant(_index2label);
12759 // Jump to Address(table_base + switch_reg)
12760 InternalAddress table(table_base);
12761 Address index(noreg, $switch_val$$Register, Address::times_1);
12762 __ jump(ArrayAddress(table, index));
12763 %}
12764 ins_pc_relative(1);
12765 ins_pipe(pipe_jmp);
12766 %}
12768 // Jump Direct - Label defines a relative address from JMP+1
12769 instruct jmpDir(label labl) %{
12770 match(Goto);
12771 effect(USE labl);
12773 ins_cost(300);
12774 format %{ "JMP $labl" %}
12775 size(5);
12776 opcode(0xE9);
12777 ins_encode( OpcP, Lbl( labl ) );
12778 ins_pipe( pipe_jmp );
12779 ins_pc_relative(1);
12780 %}
12782 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12783 instruct jmpCon(cmpOp cop, eFlagsReg cr, label labl) %{
12784 match(If cop cr);
12785 effect(USE labl);
12787 ins_cost(300);
12788 format %{ "J$cop $labl" %}
12789 size(6);
12790 opcode(0x0F, 0x80);
12791 ins_encode( Jcc( cop, labl) );
12792 ins_pipe( pipe_jcc );
12793 ins_pc_relative(1);
12794 %}
12796 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12797 instruct jmpLoopEnd(cmpOp cop, eFlagsReg cr, label labl) %{
12798 match(CountedLoopEnd cop cr);
12799 effect(USE labl);
12801 ins_cost(300);
12802 format %{ "J$cop $labl\t# Loop end" %}
12803 size(6);
12804 opcode(0x0F, 0x80);
12805 ins_encode( Jcc( cop, labl) );
12806 ins_pipe( pipe_jcc );
12807 ins_pc_relative(1);
12808 %}
12810 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12811 instruct jmpLoopEndU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12812 match(CountedLoopEnd cop cmp);
12813 effect(USE labl);
12815 ins_cost(300);
12816 format %{ "J$cop,u $labl\t# Loop end" %}
12817 size(6);
12818 opcode(0x0F, 0x80);
12819 ins_encode( Jcc( cop, labl) );
12820 ins_pipe( pipe_jcc );
12821 ins_pc_relative(1);
12822 %}
12824 instruct jmpLoopEndUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12825 match(CountedLoopEnd cop cmp);
12826 effect(USE labl);
12828 ins_cost(200);
12829 format %{ "J$cop,u $labl\t# Loop end" %}
12830 size(6);
12831 opcode(0x0F, 0x80);
12832 ins_encode( Jcc( cop, labl) );
12833 ins_pipe( pipe_jcc );
12834 ins_pc_relative(1);
12835 %}
12837 // Jump Direct Conditional - using unsigned comparison
12838 instruct jmpConU(cmpOpU cop, eFlagsRegU cmp, label labl) %{
12839 match(If cop cmp);
12840 effect(USE labl);
12842 ins_cost(300);
12843 format %{ "J$cop,u $labl" %}
12844 size(6);
12845 opcode(0x0F, 0x80);
12846 ins_encode(Jcc(cop, labl));
12847 ins_pipe(pipe_jcc);
12848 ins_pc_relative(1);
12849 %}
12851 instruct jmpConUCF(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
12852 match(If cop cmp);
12853 effect(USE labl);
12855 ins_cost(200);
12856 format %{ "J$cop,u $labl" %}
12857 size(6);
12858 opcode(0x0F, 0x80);
12859 ins_encode(Jcc(cop, labl));
12860 ins_pipe(pipe_jcc);
12861 ins_pc_relative(1);
12862 %}
12864 instruct jmpConUCF2(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
12865 match(If cop cmp);
12866 effect(USE labl);
12868 ins_cost(200);
12869 format %{ $$template
12870 if ($cop$$cmpcode == Assembler::notEqual) {
12871 $$emit$$"JP,u $labl\n\t"
12872 $$emit$$"J$cop,u $labl"
12873 } else {
12874 $$emit$$"JP,u done\n\t"
12875 $$emit$$"J$cop,u $labl\n\t"
12876 $$emit$$"done:"
12877 }
12878 %}
12879 size(12);
12880 opcode(0x0F, 0x80);
12881 ins_encode %{
12882 Label* l = $labl$$label;
12883 $$$emit8$primary;
12884 emit_cc(cbuf, $secondary, Assembler::parity);
12885 int parity_disp = -1;
12886 bool ok = false;
12887 if ($cop$$cmpcode == Assembler::notEqual) {
12888 // the two jumps 6 bytes apart so the jump distances are too
12889 parity_disp = l ? (l->loc_pos() - (cbuf.code_size() + 4)) : 0;
12890 } else if ($cop$$cmpcode == Assembler::equal) {
12891 parity_disp = 6;
12892 ok = true;
12893 } else {
12894 ShouldNotReachHere();
12895 }
12896 emit_d32(cbuf, parity_disp);
12897 $$$emit8$primary;
12898 emit_cc(cbuf, $secondary, $cop$$cmpcode);
12899 int disp = l ? (l->loc_pos() - (cbuf.code_size() + 4)) : 0;
12900 emit_d32(cbuf, disp);
12901 %}
12902 ins_pipe(pipe_jcc);
12903 ins_pc_relative(1);
12904 %}
12906 // ============================================================================
12907 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass
12908 // array for an instance of the superklass. Set a hidden internal cache on a
12909 // hit (cache is checked with exposed code in gen_subtype_check()). Return
12910 // NZ for a miss or zero for a hit. The encoding ALSO sets flags.
12911 instruct partialSubtypeCheck( eDIRegP result, eSIRegP sub, eAXRegP super, eCXRegI rcx, eFlagsReg cr ) %{
12912 match(Set result (PartialSubtypeCheck sub super));
12913 effect( KILL rcx, KILL cr );
12915 ins_cost(1100); // slightly larger than the next version
12916 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12917 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
12918 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12919 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12920 "JNE,s miss\t\t# Missed: EDI not-zero\n\t"
12921 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache\n\t"
12922 "XOR $result,$result\t\t Hit: EDI zero\n\t"
12923 "miss:\t" %}
12925 opcode(0x1); // Force a XOR of EDI
12926 ins_encode( enc_PartialSubtypeCheck() );
12927 ins_pipe( pipe_slow );
12928 %}
12930 instruct partialSubtypeCheck_vs_Zero( eFlagsReg cr, eSIRegP sub, eAXRegP super, eCXRegI rcx, eDIRegP result, immP0 zero ) %{
12931 match(Set cr (CmpP (PartialSubtypeCheck sub super) zero));
12932 effect( KILL rcx, KILL result );
12934 ins_cost(1000);
12935 format %{ "MOV EDI,[$sub+Klass::secondary_supers]\n\t"
12936 "MOV ECX,[EDI+arrayKlass::length]\t# length to scan\n\t"
12937 "ADD EDI,arrayKlass::base_offset\t# Skip to start of data; set NZ in case count is zero\n\t"
12938 "REPNE SCASD\t# Scan *EDI++ for a match with EAX while CX-- != 0\n\t"
12939 "JNE,s miss\t\t# Missed: flags NZ\n\t"
12940 "MOV [$sub+Klass::secondary_super_cache],$super\t# Hit: update cache, flags Z\n\t"
12941 "miss:\t" %}
12943 opcode(0x0); // No need to XOR EDI
12944 ins_encode( enc_PartialSubtypeCheck() );
12945 ins_pipe( pipe_slow );
12946 %}
12948 // ============================================================================
12949 // Branch Instructions -- short offset versions
12950 //
12951 // These instructions are used to replace jumps of a long offset (the default
12952 // match) with jumps of a shorter offset. These instructions are all tagged
12953 // with the ins_short_branch attribute, which causes the ADLC to suppress the
12954 // match rules in general matching. Instead, the ADLC generates a conversion
12955 // method in the MachNode which can be used to do in-place replacement of the
12956 // long variant with the shorter variant. The compiler will determine if a
12957 // branch can be taken by the is_short_branch_offset() predicate in the machine
12958 // specific code section of the file.
12960 // Jump Direct - Label defines a relative address from JMP+1
12961 instruct jmpDir_short(label labl) %{
12962 match(Goto);
12963 effect(USE labl);
12965 ins_cost(300);
12966 format %{ "JMP,s $labl" %}
12967 size(2);
12968 opcode(0xEB);
12969 ins_encode( OpcP, LblShort( labl ) );
12970 ins_pipe( pipe_jmp );
12971 ins_pc_relative(1);
12972 ins_short_branch(1);
12973 %}
12975 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12976 instruct jmpCon_short(cmpOp cop, eFlagsReg cr, label labl) %{
12977 match(If cop cr);
12978 effect(USE labl);
12980 ins_cost(300);
12981 format %{ "J$cop,s $labl" %}
12982 size(2);
12983 opcode(0x70);
12984 ins_encode( JccShort( cop, labl) );
12985 ins_pipe( pipe_jcc );
12986 ins_pc_relative(1);
12987 ins_short_branch(1);
12988 %}
12990 // Jump Direct Conditional - Label defines a relative address from Jcc+1
12991 instruct jmpLoopEnd_short(cmpOp cop, eFlagsReg cr, label labl) %{
12992 match(CountedLoopEnd cop cr);
12993 effect(USE labl);
12995 ins_cost(300);
12996 format %{ "J$cop,s $labl\t# Loop end" %}
12997 size(2);
12998 opcode(0x70);
12999 ins_encode( JccShort( cop, labl) );
13000 ins_pipe( pipe_jcc );
13001 ins_pc_relative(1);
13002 ins_short_branch(1);
13003 %}
13005 // Jump Direct Conditional - Label defines a relative address from Jcc+1
13006 instruct jmpLoopEndU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13007 match(CountedLoopEnd cop cmp);
13008 effect(USE labl);
13010 ins_cost(300);
13011 format %{ "J$cop,us $labl\t# Loop end" %}
13012 size(2);
13013 opcode(0x70);
13014 ins_encode( JccShort( cop, labl) );
13015 ins_pipe( pipe_jcc );
13016 ins_pc_relative(1);
13017 ins_short_branch(1);
13018 %}
13020 instruct jmpLoopEndUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13021 match(CountedLoopEnd cop cmp);
13022 effect(USE labl);
13024 ins_cost(300);
13025 format %{ "J$cop,us $labl\t# Loop end" %}
13026 size(2);
13027 opcode(0x70);
13028 ins_encode( JccShort( cop, labl) );
13029 ins_pipe( pipe_jcc );
13030 ins_pc_relative(1);
13031 ins_short_branch(1);
13032 %}
13034 // Jump Direct Conditional - using unsigned comparison
13035 instruct jmpConU_short(cmpOpU cop, eFlagsRegU cmp, label labl) %{
13036 match(If cop cmp);
13037 effect(USE labl);
13039 ins_cost(300);
13040 format %{ "J$cop,us $labl" %}
13041 size(2);
13042 opcode(0x70);
13043 ins_encode( JccShort( cop, labl) );
13044 ins_pipe( pipe_jcc );
13045 ins_pc_relative(1);
13046 ins_short_branch(1);
13047 %}
13049 instruct jmpConUCF_short(cmpOpUCF cop, eFlagsRegUCF cmp, label labl) %{
13050 match(If cop cmp);
13051 effect(USE labl);
13053 ins_cost(300);
13054 format %{ "J$cop,us $labl" %}
13055 size(2);
13056 opcode(0x70);
13057 ins_encode( JccShort( cop, labl) );
13058 ins_pipe( pipe_jcc );
13059 ins_pc_relative(1);
13060 ins_short_branch(1);
13061 %}
13063 instruct jmpConUCF2_short(cmpOpUCF2 cop, eFlagsRegUCF cmp, label labl) %{
13064 match(If cop cmp);
13065 effect(USE labl);
13067 ins_cost(300);
13068 format %{ $$template
13069 if ($cop$$cmpcode == Assembler::notEqual) {
13070 $$emit$$"JP,u,s $labl\n\t"
13071 $$emit$$"J$cop,u,s $labl"
13072 } else {
13073 $$emit$$"JP,u,s done\n\t"
13074 $$emit$$"J$cop,u,s $labl\n\t"
13075 $$emit$$"done:"
13076 }
13077 %}
13078 size(4);
13079 opcode(0x70);
13080 ins_encode %{
13081 Label* l = $labl$$label;
13082 emit_cc(cbuf, $primary, Assembler::parity);
13083 int parity_disp = -1;
13084 if ($cop$$cmpcode == Assembler::notEqual) {
13085 parity_disp = l ? (l->loc_pos() - (cbuf.code_size() + 1)) : 0;
13086 } else if ($cop$$cmpcode == Assembler::equal) {
13087 parity_disp = 2;
13088 } else {
13089 ShouldNotReachHere();
13090 }
13091 emit_d8(cbuf, parity_disp);
13092 emit_cc(cbuf, $primary, $cop$$cmpcode);
13093 int disp = l ? (l->loc_pos() - (cbuf.code_size() + 1)) : 0;
13094 emit_d8(cbuf, disp);
13095 assert(-128 <= disp && disp <= 127, "Displacement too large for short jmp");
13096 assert(-128 <= parity_disp && parity_disp <= 127, "Displacement too large for short jmp");
13097 %}
13098 ins_pipe(pipe_jcc);
13099 ins_pc_relative(1);
13100 ins_short_branch(1);
13101 %}
13103 // ============================================================================
13104 // Long Compare
13105 //
13106 // Currently we hold longs in 2 registers. Comparing such values efficiently
13107 // is tricky. The flavor of compare used depends on whether we are testing
13108 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit.
13109 // The GE test is the negated LT test. The LE test can be had by commuting
13110 // the operands (yielding a GE test) and then negating; negate again for the
13111 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the
13112 // NE test is negated from that.
13114 // Due to a shortcoming in the ADLC, it mixes up expressions like:
13115 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the
13116 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections
13117 // are collapsed internally in the ADLC's dfa-gen code. The match for
13118 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the
13119 // foo match ends up with the wrong leaf. One fix is to not match both
13120 // reg-reg and reg-zero forms of long-compare. This is unfortunate because
13121 // both forms beat the trinary form of long-compare and both are very useful
13122 // on Intel which has so few registers.
13124 // Manifest a CmpL result in an integer register. Very painful.
13125 // This is the test to avoid.
13126 instruct cmpL3_reg_reg(eSIRegI dst, eRegL src1, eRegL src2, eFlagsReg flags ) %{
13127 match(Set dst (CmpL3 src1 src2));
13128 effect( KILL flags );
13129 ins_cost(1000);
13130 format %{ "XOR $dst,$dst\n\t"
13131 "CMP $src1.hi,$src2.hi\n\t"
13132 "JLT,s m_one\n\t"
13133 "JGT,s p_one\n\t"
13134 "CMP $src1.lo,$src2.lo\n\t"
13135 "JB,s m_one\n\t"
13136 "JEQ,s done\n"
13137 "p_one:\tINC $dst\n\t"
13138 "JMP,s done\n"
13139 "m_one:\tDEC $dst\n"
13140 "done:" %}
13141 ins_encode %{
13142 Label p_one, m_one, done;
13143 __ xorptr($dst$$Register, $dst$$Register);
13144 __ cmpl(HIGH_FROM_LOW($src1$$Register), HIGH_FROM_LOW($src2$$Register));
13145 __ jccb(Assembler::less, m_one);
13146 __ jccb(Assembler::greater, p_one);
13147 __ cmpl($src1$$Register, $src2$$Register);
13148 __ jccb(Assembler::below, m_one);
13149 __ jccb(Assembler::equal, done);
13150 __ bind(p_one);
13151 __ incrementl($dst$$Register);
13152 __ jmpb(done);
13153 __ bind(m_one);
13154 __ decrementl($dst$$Register);
13155 __ bind(done);
13156 %}
13157 ins_pipe( pipe_slow );
13158 %}
13160 //======
13161 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13162 // compares. Can be used for LE or GT compares by reversing arguments.
13163 // NOT GOOD FOR EQ/NE tests.
13164 instruct cmpL_zero_flags_LTGE( flagsReg_long_LTGE flags, eRegL src, immL0 zero ) %{
13165 match( Set flags (CmpL src zero ));
13166 ins_cost(100);
13167 format %{ "TEST $src.hi,$src.hi" %}
13168 opcode(0x85);
13169 ins_encode( OpcP, RegReg_Hi2( src, src ) );
13170 ins_pipe( ialu_cr_reg_reg );
13171 %}
13173 // Manifest a CmpL result in the normal flags. Only good for LT or GE
13174 // compares. Can be used for LE or GT compares by reversing arguments.
13175 // NOT GOOD FOR EQ/NE tests.
13176 instruct cmpL_reg_flags_LTGE( flagsReg_long_LTGE flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13177 match( Set flags (CmpL src1 src2 ));
13178 effect( TEMP tmp );
13179 ins_cost(300);
13180 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13181 "MOV $tmp,$src1.hi\n\t"
13182 "SBB $tmp,$src2.hi\t! Compute flags for long compare" %}
13183 ins_encode( long_cmp_flags2( src1, src2, tmp ) );
13184 ins_pipe( ialu_cr_reg_reg );
13185 %}
13187 // Long compares reg < zero/req OR reg >= zero/req.
13188 // Just a wrapper for a normal branch, plus the predicate test.
13189 instruct cmpL_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, label labl) %{
13190 match(If cmp flags);
13191 effect(USE labl);
13192 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13193 expand %{
13194 jmpCon(cmp,flags,labl); // JLT or JGE...
13195 %}
13196 %}
13198 // Compare 2 longs and CMOVE longs.
13199 instruct cmovLL_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, eRegL src) %{
13200 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13201 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13202 ins_cost(400);
13203 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13204 "CMOV$cmp $dst.hi,$src.hi" %}
13205 opcode(0x0F,0x40);
13206 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13207 ins_pipe( pipe_cmov_reg_long );
13208 %}
13210 instruct cmovLL_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegL dst, load_long_memory src) %{
13211 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13212 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13213 ins_cost(500);
13214 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13215 "CMOV$cmp $dst.hi,$src.hi" %}
13216 opcode(0x0F,0x40);
13217 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13218 ins_pipe( pipe_cmov_reg_long );
13219 %}
13221 // Compare 2 longs and CMOVE ints.
13222 instruct cmovII_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, eRegI src) %{
13223 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13224 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13225 ins_cost(200);
13226 format %{ "CMOV$cmp $dst,$src" %}
13227 opcode(0x0F,0x40);
13228 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13229 ins_pipe( pipe_cmov_reg );
13230 %}
13232 instruct cmovII_mem_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegI dst, memory src) %{
13233 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13234 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13235 ins_cost(250);
13236 format %{ "CMOV$cmp $dst,$src" %}
13237 opcode(0x0F,0x40);
13238 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13239 ins_pipe( pipe_cmov_mem );
13240 %}
13242 // Compare 2 longs and CMOVE ints.
13243 instruct cmovPP_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, eRegP dst, eRegP src) %{
13244 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge ));
13245 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13246 ins_cost(200);
13247 format %{ "CMOV$cmp $dst,$src" %}
13248 opcode(0x0F,0x40);
13249 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13250 ins_pipe( pipe_cmov_reg );
13251 %}
13253 // Compare 2 longs and CMOVE doubles
13254 instruct cmovDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regD dst, regD src) %{
13255 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13256 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13257 ins_cost(200);
13258 expand %{
13259 fcmovD_regS(cmp,flags,dst,src);
13260 %}
13261 %}
13263 // Compare 2 longs and CMOVE doubles
13264 instruct cmovXDD_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regXD dst, regXD src) %{
13265 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13266 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13267 ins_cost(200);
13268 expand %{
13269 fcmovXD_regS(cmp,flags,dst,src);
13270 %}
13271 %}
13273 instruct cmovFF_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regF dst, regF src) %{
13274 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13275 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13276 ins_cost(200);
13277 expand %{
13278 fcmovF_regS(cmp,flags,dst,src);
13279 %}
13280 %}
13282 instruct cmovXX_reg_LTGE(cmpOp cmp, flagsReg_long_LTGE flags, regX dst, regX src) %{
13283 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::lt || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ge );
13284 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13285 ins_cost(200);
13286 expand %{
13287 fcmovX_regS(cmp,flags,dst,src);
13288 %}
13289 %}
13291 //======
13292 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13293 instruct cmpL_zero_flags_EQNE( flagsReg_long_EQNE flags, eRegL src, immL0 zero, eRegI tmp ) %{
13294 match( Set flags (CmpL src zero ));
13295 effect(TEMP tmp);
13296 ins_cost(200);
13297 format %{ "MOV $tmp,$src.lo\n\t"
13298 "OR $tmp,$src.hi\t! Long is EQ/NE 0?" %}
13299 ins_encode( long_cmp_flags0( src, tmp ) );
13300 ins_pipe( ialu_reg_reg_long );
13301 %}
13303 // Manifest a CmpL result in the normal flags. Only good for EQ/NE compares.
13304 instruct cmpL_reg_flags_EQNE( flagsReg_long_EQNE flags, eRegL src1, eRegL src2 ) %{
13305 match( Set flags (CmpL src1 src2 ));
13306 ins_cost(200+300);
13307 format %{ "CMP $src1.lo,$src2.lo\t! Long compare; set flags for low bits\n\t"
13308 "JNE,s skip\n\t"
13309 "CMP $src1.hi,$src2.hi\n\t"
13310 "skip:\t" %}
13311 ins_encode( long_cmp_flags1( src1, src2 ) );
13312 ins_pipe( ialu_cr_reg_reg );
13313 %}
13315 // Long compare reg == zero/reg OR reg != zero/reg
13316 // Just a wrapper for a normal branch, plus the predicate test.
13317 instruct cmpL_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, label labl) %{
13318 match(If cmp flags);
13319 effect(USE labl);
13320 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13321 expand %{
13322 jmpCon(cmp,flags,labl); // JEQ or JNE...
13323 %}
13324 %}
13326 // Compare 2 longs and CMOVE longs.
13327 instruct cmovLL_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, eRegL src) %{
13328 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13329 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13330 ins_cost(400);
13331 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13332 "CMOV$cmp $dst.hi,$src.hi" %}
13333 opcode(0x0F,0x40);
13334 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13335 ins_pipe( pipe_cmov_reg_long );
13336 %}
13338 instruct cmovLL_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegL dst, load_long_memory src) %{
13339 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13340 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13341 ins_cost(500);
13342 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13343 "CMOV$cmp $dst.hi,$src.hi" %}
13344 opcode(0x0F,0x40);
13345 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13346 ins_pipe( pipe_cmov_reg_long );
13347 %}
13349 // Compare 2 longs and CMOVE ints.
13350 instruct cmovII_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, eRegI src) %{
13351 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13352 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13353 ins_cost(200);
13354 format %{ "CMOV$cmp $dst,$src" %}
13355 opcode(0x0F,0x40);
13356 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13357 ins_pipe( pipe_cmov_reg );
13358 %}
13360 instruct cmovII_mem_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegI dst, memory src) %{
13361 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13362 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13363 ins_cost(250);
13364 format %{ "CMOV$cmp $dst,$src" %}
13365 opcode(0x0F,0x40);
13366 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13367 ins_pipe( pipe_cmov_mem );
13368 %}
13370 // Compare 2 longs and CMOVE ints.
13371 instruct cmovPP_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, eRegP dst, eRegP src) %{
13372 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne ));
13373 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13374 ins_cost(200);
13375 format %{ "CMOV$cmp $dst,$src" %}
13376 opcode(0x0F,0x40);
13377 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13378 ins_pipe( pipe_cmov_reg );
13379 %}
13381 // Compare 2 longs and CMOVE doubles
13382 instruct cmovDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regD dst, regD src) %{
13383 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13384 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13385 ins_cost(200);
13386 expand %{
13387 fcmovD_regS(cmp,flags,dst,src);
13388 %}
13389 %}
13391 // Compare 2 longs and CMOVE doubles
13392 instruct cmovXDD_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regXD dst, regXD src) %{
13393 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13394 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13395 ins_cost(200);
13396 expand %{
13397 fcmovXD_regS(cmp,flags,dst,src);
13398 %}
13399 %}
13401 instruct cmovFF_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regF dst, regF src) %{
13402 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13403 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13404 ins_cost(200);
13405 expand %{
13406 fcmovF_regS(cmp,flags,dst,src);
13407 %}
13408 %}
13410 instruct cmovXX_reg_EQNE(cmpOp cmp, flagsReg_long_EQNE flags, regX dst, regX src) %{
13411 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::eq || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::ne );
13412 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13413 ins_cost(200);
13414 expand %{
13415 fcmovX_regS(cmp,flags,dst,src);
13416 %}
13417 %}
13419 //======
13420 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13421 // Same as cmpL_reg_flags_LEGT except must negate src
13422 instruct cmpL_zero_flags_LEGT( flagsReg_long_LEGT flags, eRegL src, immL0 zero, eRegI tmp ) %{
13423 match( Set flags (CmpL src zero ));
13424 effect( TEMP tmp );
13425 ins_cost(300);
13426 format %{ "XOR $tmp,$tmp\t# Long compare for -$src < 0, use commuted test\n\t"
13427 "CMP $tmp,$src.lo\n\t"
13428 "SBB $tmp,$src.hi\n\t" %}
13429 ins_encode( long_cmp_flags3(src, tmp) );
13430 ins_pipe( ialu_reg_reg_long );
13431 %}
13433 // Manifest a CmpL result in the normal flags. Only good for LE or GT compares.
13434 // Same as cmpL_reg_flags_LTGE except operands swapped. Swapping operands
13435 // requires a commuted test to get the same result.
13436 instruct cmpL_reg_flags_LEGT( flagsReg_long_LEGT flags, eRegL src1, eRegL src2, eRegI tmp ) %{
13437 match( Set flags (CmpL src1 src2 ));
13438 effect( TEMP tmp );
13439 ins_cost(300);
13440 format %{ "CMP $src2.lo,$src1.lo\t! Long compare, swapped operands, use with commuted test\n\t"
13441 "MOV $tmp,$src2.hi\n\t"
13442 "SBB $tmp,$src1.hi\t! Compute flags for long compare" %}
13443 ins_encode( long_cmp_flags2( src2, src1, tmp ) );
13444 ins_pipe( ialu_cr_reg_reg );
13445 %}
13447 // Long compares reg < zero/req OR reg >= zero/req.
13448 // Just a wrapper for a normal branch, plus the predicate test
13449 instruct cmpL_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, label labl) %{
13450 match(If cmp flags);
13451 effect(USE labl);
13452 predicate( _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt || _kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le );
13453 ins_cost(300);
13454 expand %{
13455 jmpCon(cmp,flags,labl); // JGT or JLE...
13456 %}
13457 %}
13459 // Compare 2 longs and CMOVE longs.
13460 instruct cmovLL_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, eRegL src) %{
13461 match(Set dst (CMoveL (Binary cmp flags) (Binary dst src)));
13462 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13463 ins_cost(400);
13464 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13465 "CMOV$cmp $dst.hi,$src.hi" %}
13466 opcode(0x0F,0x40);
13467 ins_encode( enc_cmov(cmp), RegReg_Lo2( dst, src ), enc_cmov(cmp), RegReg_Hi2( dst, src ) );
13468 ins_pipe( pipe_cmov_reg_long );
13469 %}
13471 instruct cmovLL_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegL dst, load_long_memory src) %{
13472 match(Set dst (CMoveL (Binary cmp flags) (Binary dst (LoadL src))));
13473 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13474 ins_cost(500);
13475 format %{ "CMOV$cmp $dst.lo,$src.lo\n\t"
13476 "CMOV$cmp $dst.hi,$src.hi+4" %}
13477 opcode(0x0F,0x40);
13478 ins_encode( enc_cmov(cmp), RegMem(dst, src), enc_cmov(cmp), RegMem_Hi(dst, src) );
13479 ins_pipe( pipe_cmov_reg_long );
13480 %}
13482 // Compare 2 longs and CMOVE ints.
13483 instruct cmovII_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, eRegI src) %{
13484 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13485 match(Set dst (CMoveI (Binary cmp flags) (Binary dst src)));
13486 ins_cost(200);
13487 format %{ "CMOV$cmp $dst,$src" %}
13488 opcode(0x0F,0x40);
13489 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13490 ins_pipe( pipe_cmov_reg );
13491 %}
13493 instruct cmovII_mem_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegI dst, memory src) %{
13494 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13495 match(Set dst (CMoveI (Binary cmp flags) (Binary dst (LoadI src))));
13496 ins_cost(250);
13497 format %{ "CMOV$cmp $dst,$src" %}
13498 opcode(0x0F,0x40);
13499 ins_encode( enc_cmov(cmp), RegMem( dst, src ) );
13500 ins_pipe( pipe_cmov_mem );
13501 %}
13503 // Compare 2 longs and CMOVE ptrs.
13504 instruct cmovPP_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, eRegP dst, eRegP src) %{
13505 predicate(VM_Version::supports_cmov() && ( _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt ));
13506 match(Set dst (CMoveP (Binary cmp flags) (Binary dst src)));
13507 ins_cost(200);
13508 format %{ "CMOV$cmp $dst,$src" %}
13509 opcode(0x0F,0x40);
13510 ins_encode( enc_cmov(cmp), RegReg( dst, src ) );
13511 ins_pipe( pipe_cmov_reg );
13512 %}
13514 // Compare 2 longs and CMOVE doubles
13515 instruct cmovDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regD dst, regD src) %{
13516 predicate( UseSSE<=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13517 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13518 ins_cost(200);
13519 expand %{
13520 fcmovD_regS(cmp,flags,dst,src);
13521 %}
13522 %}
13524 // Compare 2 longs and CMOVE doubles
13525 instruct cmovXDD_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regXD dst, regXD src) %{
13526 predicate( UseSSE>=2 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13527 match(Set dst (CMoveD (Binary cmp flags) (Binary dst src)));
13528 ins_cost(200);
13529 expand %{
13530 fcmovXD_regS(cmp,flags,dst,src);
13531 %}
13532 %}
13534 instruct cmovFF_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regF dst, regF src) %{
13535 predicate( UseSSE==0 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13536 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13537 ins_cost(200);
13538 expand %{
13539 fcmovF_regS(cmp,flags,dst,src);
13540 %}
13541 %}
13544 instruct cmovXX_reg_LEGT(cmpOp_commute cmp, flagsReg_long_LEGT flags, regX dst, regX src) %{
13545 predicate( UseSSE>=1 && _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::le || _kids[0]->_kids[0]->_leaf->as_Bool()->_test._test == BoolTest::gt );
13546 match(Set dst (CMoveF (Binary cmp flags) (Binary dst src)));
13547 ins_cost(200);
13548 expand %{
13549 fcmovX_regS(cmp,flags,dst,src);
13550 %}
13551 %}
13554 // ============================================================================
13555 // Procedure Call/Return Instructions
13556 // Call Java Static Instruction
13557 // Note: If this code changes, the corresponding ret_addr_offset() and
13558 // compute_padding() functions will have to be adjusted.
13559 instruct CallStaticJavaDirect(method meth) %{
13560 match(CallStaticJava);
13561 predicate(! ((CallStaticJavaNode*)n)->is_method_handle_invoke());
13562 effect(USE meth);
13564 ins_cost(300);
13565 format %{ "CALL,static " %}
13566 opcode(0xE8); /* E8 cd */
13567 ins_encode( pre_call_FPU,
13568 Java_Static_Call( meth ),
13569 call_epilog,
13570 post_call_FPU );
13571 ins_pipe( pipe_slow );
13572 ins_pc_relative(1);
13573 ins_alignment(4);
13574 %}
13576 // Call Java Static Instruction (method handle version)
13577 // Note: If this code changes, the corresponding ret_addr_offset() and
13578 // compute_padding() functions will have to be adjusted.
13579 instruct CallStaticJavaHandle(method meth, eBPRegP ebp_mh_SP_save) %{
13580 match(CallStaticJava);
13581 predicate(((CallStaticJavaNode*)n)->is_method_handle_invoke());
13582 effect(USE meth);
13583 // EBP is saved by all callees (for interpreter stack correction).
13584 // We use it here for a similar purpose, in {preserve,restore}_SP.
13586 ins_cost(300);
13587 format %{ "CALL,static/MethodHandle " %}
13588 opcode(0xE8); /* E8 cd */
13589 ins_encode( pre_call_FPU,
13590 preserve_SP,
13591 Java_Static_Call( meth ),
13592 restore_SP,
13593 call_epilog,
13594 post_call_FPU );
13595 ins_pipe( pipe_slow );
13596 ins_pc_relative(1);
13597 ins_alignment(4);
13598 %}
13600 // Call Java Dynamic Instruction
13601 // Note: If this code changes, the corresponding ret_addr_offset() and
13602 // compute_padding() functions will have to be adjusted.
13603 instruct CallDynamicJavaDirect(method meth) %{
13604 match(CallDynamicJava);
13605 effect(USE meth);
13607 ins_cost(300);
13608 format %{ "MOV EAX,(oop)-1\n\t"
13609 "CALL,dynamic" %}
13610 opcode(0xE8); /* E8 cd */
13611 ins_encode( pre_call_FPU,
13612 Java_Dynamic_Call( meth ),
13613 call_epilog,
13614 post_call_FPU );
13615 ins_pipe( pipe_slow );
13616 ins_pc_relative(1);
13617 ins_alignment(4);
13618 %}
13620 // Call Runtime Instruction
13621 instruct CallRuntimeDirect(method meth) %{
13622 match(CallRuntime );
13623 effect(USE meth);
13625 ins_cost(300);
13626 format %{ "CALL,runtime " %}
13627 opcode(0xE8); /* E8 cd */
13628 // Use FFREEs to clear entries in float stack
13629 ins_encode( pre_call_FPU,
13630 FFree_Float_Stack_All,
13631 Java_To_Runtime( meth ),
13632 post_call_FPU );
13633 ins_pipe( pipe_slow );
13634 ins_pc_relative(1);
13635 %}
13637 // Call runtime without safepoint
13638 instruct CallLeafDirect(method meth) %{
13639 match(CallLeaf);
13640 effect(USE meth);
13642 ins_cost(300);
13643 format %{ "CALL_LEAF,runtime " %}
13644 opcode(0xE8); /* E8 cd */
13645 ins_encode( pre_call_FPU,
13646 FFree_Float_Stack_All,
13647 Java_To_Runtime( meth ),
13648 Verify_FPU_For_Leaf, post_call_FPU );
13649 ins_pipe( pipe_slow );
13650 ins_pc_relative(1);
13651 %}
13653 instruct CallLeafNoFPDirect(method meth) %{
13654 match(CallLeafNoFP);
13655 effect(USE meth);
13657 ins_cost(300);
13658 format %{ "CALL_LEAF_NOFP,runtime " %}
13659 opcode(0xE8); /* E8 cd */
13660 ins_encode(Java_To_Runtime(meth));
13661 ins_pipe( pipe_slow );
13662 ins_pc_relative(1);
13663 %}
13666 // Return Instruction
13667 // Remove the return address & jump to it.
13668 instruct Ret() %{
13669 match(Return);
13670 format %{ "RET" %}
13671 opcode(0xC3);
13672 ins_encode(OpcP);
13673 ins_pipe( pipe_jmp );
13674 %}
13676 // Tail Call; Jump from runtime stub to Java code.
13677 // Also known as an 'interprocedural jump'.
13678 // Target of jump will eventually return to caller.
13679 // TailJump below removes the return address.
13680 instruct TailCalljmpInd(eRegP_no_EBP jump_target, eBXRegP method_oop) %{
13681 match(TailCall jump_target method_oop );
13682 ins_cost(300);
13683 format %{ "JMP $jump_target \t# EBX holds method oop" %}
13684 opcode(0xFF, 0x4); /* Opcode FF /4 */
13685 ins_encode( OpcP, RegOpc(jump_target) );
13686 ins_pipe( pipe_jmp );
13687 %}
13690 // Tail Jump; remove the return address; jump to target.
13691 // TailCall above leaves the return address around.
13692 instruct tailjmpInd(eRegP_no_EBP jump_target, eAXRegP ex_oop) %{
13693 match( TailJump jump_target ex_oop );
13694 ins_cost(300);
13695 format %{ "POP EDX\t# pop return address into dummy\n\t"
13696 "JMP $jump_target " %}
13697 opcode(0xFF, 0x4); /* Opcode FF /4 */
13698 ins_encode( enc_pop_rdx,
13699 OpcP, RegOpc(jump_target) );
13700 ins_pipe( pipe_jmp );
13701 %}
13703 // Create exception oop: created by stack-crawling runtime code.
13704 // Created exception is now available to this handler, and is setup
13705 // just prior to jumping to this handler. No code emitted.
13706 instruct CreateException( eAXRegP ex_oop )
13707 %{
13708 match(Set ex_oop (CreateEx));
13710 size(0);
13711 // use the following format syntax
13712 format %{ "# exception oop is in EAX; no code emitted" %}
13713 ins_encode();
13714 ins_pipe( empty );
13715 %}
13718 // Rethrow exception:
13719 // The exception oop will come in the first argument position.
13720 // Then JUMP (not call) to the rethrow stub code.
13721 instruct RethrowException()
13722 %{
13723 match(Rethrow);
13725 // use the following format syntax
13726 format %{ "JMP rethrow_stub" %}
13727 ins_encode(enc_rethrow);
13728 ins_pipe( pipe_jmp );
13729 %}
13731 // inlined locking and unlocking
13734 instruct cmpFastLock( eFlagsReg cr, eRegP object, eRegP box, eAXRegI tmp, eRegP scr) %{
13735 match( Set cr (FastLock object box) );
13736 effect( TEMP tmp, TEMP scr );
13737 ins_cost(300);
13738 format %{ "FASTLOCK $object, $box KILLS $tmp,$scr" %}
13739 ins_encode( Fast_Lock(object,box,tmp,scr) );
13740 ins_pipe( pipe_slow );
13741 ins_pc_relative(1);
13742 %}
13744 instruct cmpFastUnlock( eFlagsReg cr, eRegP object, eAXRegP box, eRegP tmp ) %{
13745 match( Set cr (FastUnlock object box) );
13746 effect( TEMP tmp );
13747 ins_cost(300);
13748 format %{ "FASTUNLOCK $object, $box, $tmp" %}
13749 ins_encode( Fast_Unlock(object,box,tmp) );
13750 ins_pipe( pipe_slow );
13751 ins_pc_relative(1);
13752 %}
13756 // ============================================================================
13757 // Safepoint Instruction
13758 instruct safePoint_poll(eFlagsReg cr) %{
13759 match(SafePoint);
13760 effect(KILL cr);
13762 // TODO-FIXME: we currently poll at offset 0 of the safepoint polling page.
13763 // On SPARC that might be acceptable as we can generate the address with
13764 // just a sethi, saving an or. By polling at offset 0 we can end up
13765 // putting additional pressure on the index-0 in the D$. Because of
13766 // alignment (just like the situation at hand) the lower indices tend
13767 // to see more traffic. It'd be better to change the polling address
13768 // to offset 0 of the last $line in the polling page.
13770 format %{ "TSTL #polladdr,EAX\t! Safepoint: poll for GC" %}
13771 ins_cost(125);
13772 size(6) ;
13773 ins_encode( Safepoint_Poll() );
13774 ins_pipe( ialu_reg_mem );
13775 %}
13777 //----------PEEPHOLE RULES-----------------------------------------------------
13778 // These must follow all instruction definitions as they use the names
13779 // defined in the instructions definitions.
13780 //
13781 // peepmatch ( root_instr_name [preceding_instruction]* );
13782 //
13783 // peepconstraint %{
13784 // (instruction_number.operand_name relational_op instruction_number.operand_name
13785 // [, ...] );
13786 // // instruction numbers are zero-based using left to right order in peepmatch
13787 //
13788 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) );
13789 // // provide an instruction_number.operand_name for each operand that appears
13790 // // in the replacement instruction's match rule
13791 //
13792 // ---------VM FLAGS---------------------------------------------------------
13793 //
13794 // All peephole optimizations can be turned off using -XX:-OptoPeephole
13795 //
13796 // Each peephole rule is given an identifying number starting with zero and
13797 // increasing by one in the order seen by the parser. An individual peephole
13798 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=#
13799 // on the command-line.
13800 //
13801 // ---------CURRENT LIMITATIONS----------------------------------------------
13802 //
13803 // Only match adjacent instructions in same basic block
13804 // Only equality constraints
13805 // Only constraints between operands, not (0.dest_reg == EAX_enc)
13806 // Only one replacement instruction
13807 //
13808 // ---------EXAMPLE----------------------------------------------------------
13809 //
13810 // // pertinent parts of existing instructions in architecture description
13811 // instruct movI(eRegI dst, eRegI src) %{
13812 // match(Set dst (CopyI src));
13813 // %}
13814 //
13815 // instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{
13816 // match(Set dst (AddI dst src));
13817 // effect(KILL cr);
13818 // %}
13819 //
13820 // // Change (inc mov) to lea
13821 // peephole %{
13822 // // increment preceeded by register-register move
13823 // peepmatch ( incI_eReg movI );
13824 // // require that the destination register of the increment
13825 // // match the destination register of the move
13826 // peepconstraint ( 0.dst == 1.dst );
13827 // // construct a replacement instruction that sets
13828 // // the destination to ( move's source register + one )
13829 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13830 // %}
13831 //
13832 // Implementation no longer uses movX instructions since
13833 // machine-independent system no longer uses CopyX nodes.
13834 //
13835 // peephole %{
13836 // peepmatch ( incI_eReg movI );
13837 // peepconstraint ( 0.dst == 1.dst );
13838 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13839 // %}
13840 //
13841 // peephole %{
13842 // peepmatch ( decI_eReg movI );
13843 // peepconstraint ( 0.dst == 1.dst );
13844 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13845 // %}
13846 //
13847 // peephole %{
13848 // peepmatch ( addI_eReg_imm movI );
13849 // peepconstraint ( 0.dst == 1.dst );
13850 // peepreplace ( leaI_eReg_immI( 0.dst 1.src 0.src ) );
13851 // %}
13852 //
13853 // peephole %{
13854 // peepmatch ( addP_eReg_imm movP );
13855 // peepconstraint ( 0.dst == 1.dst );
13856 // peepreplace ( leaP_eReg_immI( 0.dst 1.src 0.src ) );
13857 // %}
13859 // // Change load of spilled value to only a spill
13860 // instruct storeI(memory mem, eRegI src) %{
13861 // match(Set mem (StoreI mem src));
13862 // %}
13863 //
13864 // instruct loadI(eRegI dst, memory mem) %{
13865 // match(Set dst (LoadI mem));
13866 // %}
13867 //
13868 peephole %{
13869 peepmatch ( loadI storeI );
13870 peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem );
13871 peepreplace ( storeI( 1.mem 1.mem 1.src ) );
13872 %}
13874 //----------SMARTSPILL RULES---------------------------------------------------
13875 // These must follow all instruction definitions as they use the names
13876 // defined in the instructions definitions.