Mercurial > jdk8-mips64-public > hotspot / file revision

 @echo off

 REM

 REM Copyright (c) 1999, 2013, Oracle and/or its affiliates. All rights reserved.

 REM DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 REM

 REM This code is free software; you can redistribute it and/or modify it

 REM under the terms of the GNU General Public License version 2 only, as

 REM published by the Free Software Foundation.

 REM

 REM This code is distributed in the hope that it will be useful, but WITHOUT

 REM ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 REM FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 REM version 2 for more details (a copy is included in the LICENSE file that

 REM accompanied this code).

 REM

 REM You should have received a copy of the GNU General Public License version

 REM 2 along with this work; if not, write to the Free Software Foundation,

 REM Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 REM

 REM Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 REM or visit www.oracle.com if you need additional information or have any

 REM questions.

 REM  

 REM

 REM This is the interactive build setup script (as opposed to the batch

 REM build execution script). It creates $HotSpotBuildSpace if necessary,

 REM copies the appropriate files out of $HotSpotWorkSpace into it, and

 REM builds and runs ProjectCreator in it. This has the side-effect of creating

 REM the vm.vcproj file in the buildspace, which is then used in Visual C++.

 REM

 REM Since we don't have uname and we could be cross-compiling,

 REM Use the compiler to determine which ARCH we are building

 REM 

 REM Note: Running this batch file from the Windows command shell requires

 REM that "grep" be accessible on the PATH. An MKS install does this.

 REM 

 cl 2>NUL >NUL

 if %errorlevel% == 0 goto nexttest

 echo Make sure cl.exe is in your PATH before running this script.

 goto end

 :nexttest

 grep -V 2>NUL >NUL

 if %errorlevel% == 0 goto testit

 echo Make sure grep.exe is in your PATH before running this script. Either cygwin or MKS should work.

 goto end

 :testit

 cl 2>&1 | grep "x64" >NUL

 if %errorlevel% == 0 goto amd64

 set ARCH=x86

 set BUILDARCH=i486

 set Platform_arch=x86

 set Platform_arch_model=x86_32

 goto done

 :amd64

 set ARCH=x86

 set BUILDARCH=amd64

 set Platform_arch=x86

 set Platform_arch_model=x86_64

 :done

 setlocal

 if "%1" == "" goto usage

 if not "%2" == "" goto usage

 REM Set HotSpotWorkSpace to the directy two steps above this script

 for %%i in ("%~dp0..") do ( set HotSpotWorkSpace=%%~dpi)

 set HotSpotBuildRoot=%HotSpotWorkSpace%build

 set HotSpotBuildSpace=%HotSpotBuildRoot%\vs-%BUILDARCH%

 set HotSpotJDKDist=%1

 REM figure out MSC version

 for /F %%i in ('sh %HotSpotWorkSpace%/make/windows/get_msc_ver.sh') do set %%i

 echo **************************************************************

 set ProjectFile=%HotSpotBuildSpace%\jvm.vcproj

 if "%MSC_VER%" == "1200" (

 set ProjectFile=%HotSpotBuildSpace%\jvm.dsp

 echo Will generate VC6 project {unsupported}

 ) else (

 if "%MSC_VER%" == "1400" (

 echo Will generate VC8 {Visual Studio 2005}

 ) else (

 if "%MSC_VER%" == "1500" (

 echo Will generate VC9 {Visual Studio 2008}

 ) else (

 if "%MSC_VER%" == "1600" (

 echo Will generate VC10 {Visual Studio 2010}

 set ProjectFile=%HotSpotBuildSpace%\jvm.vcxproj

 ) else (

 echo Will generate VC7 project {Visual Studio 2003 .NET}

 )

 )

 )

 )

 echo %ProjectFile%

 echo **************************************************************

 REM Test all variables to see whether the directories they

 REM reference exist

 if exist %HotSpotWorkSpace% goto test1

 echo Error: directory pointed to by HotSpotWorkSpace

 echo does not exist, or the variable is not set.

 echo.

 goto usage

 :test1

 if exist %HotSpotBuildSpace% goto test2

 if not "%HotSpotBuildSpace%" == "" mkdir %HotSpotBuildSpace%

 if exist %HotSpotBuildSpace% goto test2

 echo Error: directory pointed to by HotSpotBuildSpace

 echo does not exist, or the variable is not set.

 echo.

 goto usage

 :test2

 if exist %HotSpotJDKDist% goto test3

 echo Error: directory pointed to by %HotSpotJDKDist%

 echo does not exist, or the variable is not set.

 echo.

 goto usage

 :test3

 if not "%HOTSPOTMKSHOME%" == "" goto makedir

 if exist c:\cygwin\bin set HOTSPOTMKSHOME=c:\cygwin\bin

 if not "%HOTSPOTMKSHOME%" == "" goto makedir

 echo Warning: please set variable HOTSPOTMKSHOME to place where 

 echo          your MKS/Cygwin installation is

 echo.

 goto usage

 :makedir

 echo NOTE: Using the following settings:

 echo   HotSpotWorkSpace=%HotSpotWorkSpace%

 echo   HotSpotBuildSpace=%HotSpotBuildSpace%

 echo   HotSpotJDKDist=%HotSpotJDKDist%

 REM This is now safe to do.

 :copyfiles

 for /D %%i in (compiler1, compiler2, tiered ) do (

 if NOT EXIST %HotSpotBuildSpace%\%%i\generated mkdir %HotSpotBuildSpace%\%%i\generated

 copy %HotSpotWorkSpace%\make\windows\projectfiles\%%i\* %HotSpotBuildSpace%\%%i\generated > NUL

 )

 REM force regneration of ProjectFile

 if exist %ProjectFile% del %ProjectFile%

 for /D %%i in (compiler1, compiler2, tiered ) do (

 echo -- %%i --

 echo # Generated file!                                                        >    %HotSpotBuildSpace%\%%i\local.make

 echo # Changing a variable below and then deleting %ProjectFile% will cause  >>    %HotSpotBuildSpace%\%%i\local.make

 echo # %ProjectFile% to be regenerated with the new values.  Changing the    >>    %HotSpotBuildSpace%\%%i\local.make

 echo # version requires rerunning create.bat.                                >>    %HotSpotBuildSpace%\%%i\local.make

 echo.                                      >>    %HotSpotBuildSpace%\%%i\local.make

 echo Variant=%%i			   >>    %HotSpotBuildSpace%\%%i\local.make

 echo WorkSpace=%HotSpotWorkSpace%   	   >>    %HotSpotBuildSpace%\%%i\local.make

 echo HOTSPOTWORKSPACE=%HotSpotWorkSpace%   >>    %HotSpotBuildSpace%\%%i\local.make

 echo HOTSPOTBUILDROOT=%HotSpotBuildRoot%   >>    %HotSpotBuildSpace%\%%i\local.make

 echo HOTSPOTBUILDSPACE=%HotSpotBuildSpace% >>    %HotSpotBuildSpace%\%%i\local.make

 echo HOTSPOTJDKDIST=%HotSpotJDKDist%       >>    %HotSpotBuildSpace%\%%i\local.make

 echo ARCH=%ARCH%                           >>    %HotSpotBuildSpace%\%%i\local.make

 echo BUILDARCH=%BUILDARCH%                 >>    %HotSpotBuildSpace%\%%i\local.make

 echo Platform_arch=%Platform_arch%         >>    %HotSpotBuildSpace%\%%i\local.make

 echo Platform_arch_model=%Platform_arch_model% >>    %HotSpotBuildSpace%\%%i\local.make

 echo MSC_VER=%MSC_VER% 			   >>    %HotSpotBuildSpace%\%%i\local.make

 for /D %%j in (debug, fastdebug, product) do (

 if NOT EXIST %HotSpotBuildSpace%\%%i\%%j mkdir %HotSpotBuildSpace%\%%i\%%j

 )

 pushd %HotSpotBuildSpace%\%%i\generated

 nmake /nologo

 popd

 )

 pushd %HotSpotBuildRoot%

 REM It doesn't matter which variant we use here, "compiler1" is as good as any of the others - we need the common variables

 nmake /nologo /F %HotSpotWorkSpace%/make/windows/projectfiles/common/Makefile LOCAL_MAKE=%HotSpotBuildSpace%\compiler1\local.make %ProjectFile%

 popd

 goto end

 :usage

 echo Usage: create HotSpotJDKDist

 echo.

 echo This is the VS build setup script (as opposed to the batch

 echo build execution script). It creates a build directory if necessary,

 echo copies the appropriate files out of the workspace into it, and

 echo builds and runs ProjectCreator in it. This has the side-effect of creating

 echo the %ProjectFile% file in the build space, which is then used in Visual C++.

 echo.

 echo The HotSpotJDKDist defines the JDK that should be used when running the JVM.

 echo Environment variable FORCE_MSC_VER allows to override MSVC version autodetection.

 echo.

 echo NOTE that it is now NOT safe to modify any of the files in the build

 echo space, since they may be overwritten whenever this script is run or

 echo nmake is run in that directory.

 :end

 endlocal