Tue, 02 Sep 2014 12:48:45 -0700
8055494: Add C2 x86 intrinsic for BigInteger::multiplyToLen() method
Summary: Add new C2 intrinsic for BigInteger::multiplyToLen() on x86 in 64-bit VM.
Reviewed-by: roland
1 /*
2 * Copyright (c) 2003, 2013, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
25 #include "precompiled.hpp"
26 #include "asm/macroAssembler.hpp"
27 #include "asm/macroAssembler.inline.hpp"
28 #include "code/debugInfoRec.hpp"
29 #include "code/icBuffer.hpp"
30 #include "code/vtableStubs.hpp"
31 #include "interpreter/interpreter.hpp"
32 #include "oops/compiledICHolder.hpp"
33 #include "prims/jvmtiRedefineClassesTrace.hpp"
34 #include "runtime/sharedRuntime.hpp"
35 #include "runtime/vframeArray.hpp"
36 #include "vmreg_x86.inline.hpp"
37 #ifdef COMPILER1
38 #include "c1/c1_Runtime1.hpp"
39 #endif
40 #ifdef COMPILER2
41 #include "opto/runtime.hpp"
42 #endif
44 #define __ masm->
46 const int StackAlignmentInSlots = StackAlignmentInBytes / VMRegImpl::stack_slot_size;
48 class SimpleRuntimeFrame {
50 public:
52 // Most of the runtime stubs have this simple frame layout.
53 // This class exists to make the layout shared in one place.
54 // Offsets are for compiler stack slots, which are jints.
55 enum layout {
56 // The frame sender code expects that rbp will be in the "natural" place and
57 // will override any oopMap setting for it. We must therefore force the layout
58 // so that it agrees with the frame sender code.
59 rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,
60 rbp_off2,
61 return_off, return_off2,
62 framesize
63 };
64 };
66 class RegisterSaver {
67 // Capture info about frame layout. Layout offsets are in jint
68 // units because compiler frame slots are jints.
69 #define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off
70 enum layout {
71 fpu_state_off = frame::arg_reg_save_area_bytes/BytesPerInt, // fxsave save area
72 xmm_off = fpu_state_off + 160/BytesPerInt, // offset in fxsave save area
73 DEF_XMM_OFFS(0),
74 DEF_XMM_OFFS(1),
75 DEF_XMM_OFFS(2),
76 DEF_XMM_OFFS(3),
77 DEF_XMM_OFFS(4),
78 DEF_XMM_OFFS(5),
79 DEF_XMM_OFFS(6),
80 DEF_XMM_OFFS(7),
81 DEF_XMM_OFFS(8),
82 DEF_XMM_OFFS(9),
83 DEF_XMM_OFFS(10),
84 DEF_XMM_OFFS(11),
85 DEF_XMM_OFFS(12),
86 DEF_XMM_OFFS(13),
87 DEF_XMM_OFFS(14),
88 DEF_XMM_OFFS(15),
89 fpu_state_end = fpu_state_off + ((FPUStateSizeInWords-1)*wordSize / BytesPerInt),
90 fpu_stateH_end,
91 r15_off, r15H_off,
92 r14_off, r14H_off,
93 r13_off, r13H_off,
94 r12_off, r12H_off,
95 r11_off, r11H_off,
96 r10_off, r10H_off,
97 r9_off, r9H_off,
98 r8_off, r8H_off,
99 rdi_off, rdiH_off,
100 rsi_off, rsiH_off,
101 ignore_off, ignoreH_off, // extra copy of rbp
102 rsp_off, rspH_off,
103 rbx_off, rbxH_off,
104 rdx_off, rdxH_off,
105 rcx_off, rcxH_off,
106 rax_off, raxH_off,
107 // 16-byte stack alignment fill word: see MacroAssembler::push/pop_IU_state
108 align_off, alignH_off,
109 flags_off, flagsH_off,
110 // The frame sender code expects that rbp will be in the "natural" place and
111 // will override any oopMap setting for it. We must therefore force the layout
112 // so that it agrees with the frame sender code.
113 rbp_off, rbpH_off, // copy of rbp we will restore
114 return_off, returnH_off, // slot for return address
115 reg_save_size // size in compiler stack slots
116 };
118 public:
119 static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors = false);
120 static void restore_live_registers(MacroAssembler* masm, bool restore_vectors = false);
122 // Offsets into the register save area
123 // Used by deoptimization when it is managing result register
124 // values on its own
126 static int rax_offset_in_bytes(void) { return BytesPerInt * rax_off; }
127 static int rdx_offset_in_bytes(void) { return BytesPerInt * rdx_off; }
128 static int rbx_offset_in_bytes(void) { return BytesPerInt * rbx_off; }
129 static int xmm0_offset_in_bytes(void) { return BytesPerInt * xmm0_off; }
130 static int return_offset_in_bytes(void) { return BytesPerInt * return_off; }
132 // During deoptimization only the result registers need to be restored,
133 // all the other values have already been extracted.
134 static void restore_result_registers(MacroAssembler* masm);
135 };
137 OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words, bool save_vectors) {
138 int vect_words = 0;
139 #ifdef COMPILER2
140 if (save_vectors) {
141 assert(UseAVX > 0, "256bit vectors are supported only with AVX");
142 assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
143 // Save upper half of YMM registes
144 vect_words = 16 * 16 / wordSize;
145 additional_frame_words += vect_words;
146 }
147 #else
148 assert(!save_vectors, "vectors are generated only by C2");
149 #endif
151 // Always make the frame size 16-byte aligned
152 int frame_size_in_bytes = round_to(additional_frame_words*wordSize +
153 reg_save_size*BytesPerInt, 16);
154 // OopMap frame size is in compiler stack slots (jint's) not bytes or words
155 int frame_size_in_slots = frame_size_in_bytes / BytesPerInt;
156 // The caller will allocate additional_frame_words
157 int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt;
158 // CodeBlob frame size is in words.
159 int frame_size_in_words = frame_size_in_bytes / wordSize;
160 *total_frame_words = frame_size_in_words;
162 // Save registers, fpu state, and flags.
163 // We assume caller has already pushed the return address onto the
164 // stack, so rsp is 8-byte aligned here.
165 // We push rpb twice in this sequence because we want the real rbp
166 // to be under the return like a normal enter.
168 __ enter(); // rsp becomes 16-byte aligned here
169 __ push_CPU_state(); // Push a multiple of 16 bytes
171 if (vect_words > 0) {
172 assert(vect_words*wordSize == 256, "");
173 __ subptr(rsp, 256); // Save upper half of YMM registes
174 __ vextractf128h(Address(rsp, 0),xmm0);
175 __ vextractf128h(Address(rsp, 16),xmm1);
176 __ vextractf128h(Address(rsp, 32),xmm2);
177 __ vextractf128h(Address(rsp, 48),xmm3);
178 __ vextractf128h(Address(rsp, 64),xmm4);
179 __ vextractf128h(Address(rsp, 80),xmm5);
180 __ vextractf128h(Address(rsp, 96),xmm6);
181 __ vextractf128h(Address(rsp,112),xmm7);
182 __ vextractf128h(Address(rsp,128),xmm8);
183 __ vextractf128h(Address(rsp,144),xmm9);
184 __ vextractf128h(Address(rsp,160),xmm10);
185 __ vextractf128h(Address(rsp,176),xmm11);
186 __ vextractf128h(Address(rsp,192),xmm12);
187 __ vextractf128h(Address(rsp,208),xmm13);
188 __ vextractf128h(Address(rsp,224),xmm14);
189 __ vextractf128h(Address(rsp,240),xmm15);
190 }
191 if (frame::arg_reg_save_area_bytes != 0) {
192 // Allocate argument register save area
193 __ subptr(rsp, frame::arg_reg_save_area_bytes);
194 }
196 // Set an oopmap for the call site. This oopmap will map all
197 // oop-registers and debug-info registers as callee-saved. This
198 // will allow deoptimization at this safepoint to find all possible
199 // debug-info recordings, as well as let GC find all oops.
201 OopMapSet *oop_maps = new OopMapSet();
202 OopMap* map = new OopMap(frame_size_in_slots, 0);
204 #define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_slots)
206 map->set_callee_saved(STACK_OFFSET( rax_off ), rax->as_VMReg());
207 map->set_callee_saved(STACK_OFFSET( rcx_off ), rcx->as_VMReg());
208 map->set_callee_saved(STACK_OFFSET( rdx_off ), rdx->as_VMReg());
209 map->set_callee_saved(STACK_OFFSET( rbx_off ), rbx->as_VMReg());
210 // rbp location is known implicitly by the frame sender code, needs no oopmap
211 // and the location where rbp was saved by is ignored
212 map->set_callee_saved(STACK_OFFSET( rsi_off ), rsi->as_VMReg());
213 map->set_callee_saved(STACK_OFFSET( rdi_off ), rdi->as_VMReg());
214 map->set_callee_saved(STACK_OFFSET( r8_off ), r8->as_VMReg());
215 map->set_callee_saved(STACK_OFFSET( r9_off ), r9->as_VMReg());
216 map->set_callee_saved(STACK_OFFSET( r10_off ), r10->as_VMReg());
217 map->set_callee_saved(STACK_OFFSET( r11_off ), r11->as_VMReg());
218 map->set_callee_saved(STACK_OFFSET( r12_off ), r12->as_VMReg());
219 map->set_callee_saved(STACK_OFFSET( r13_off ), r13->as_VMReg());
220 map->set_callee_saved(STACK_OFFSET( r14_off ), r14->as_VMReg());
221 map->set_callee_saved(STACK_OFFSET( r15_off ), r15->as_VMReg());
222 map->set_callee_saved(STACK_OFFSET(xmm0_off ), xmm0->as_VMReg());
223 map->set_callee_saved(STACK_OFFSET(xmm1_off ), xmm1->as_VMReg());
224 map->set_callee_saved(STACK_OFFSET(xmm2_off ), xmm2->as_VMReg());
225 map->set_callee_saved(STACK_OFFSET(xmm3_off ), xmm3->as_VMReg());
226 map->set_callee_saved(STACK_OFFSET(xmm4_off ), xmm4->as_VMReg());
227 map->set_callee_saved(STACK_OFFSET(xmm5_off ), xmm5->as_VMReg());
228 map->set_callee_saved(STACK_OFFSET(xmm6_off ), xmm6->as_VMReg());
229 map->set_callee_saved(STACK_OFFSET(xmm7_off ), xmm7->as_VMReg());
230 map->set_callee_saved(STACK_OFFSET(xmm8_off ), xmm8->as_VMReg());
231 map->set_callee_saved(STACK_OFFSET(xmm9_off ), xmm9->as_VMReg());
232 map->set_callee_saved(STACK_OFFSET(xmm10_off), xmm10->as_VMReg());
233 map->set_callee_saved(STACK_OFFSET(xmm11_off), xmm11->as_VMReg());
234 map->set_callee_saved(STACK_OFFSET(xmm12_off), xmm12->as_VMReg());
235 map->set_callee_saved(STACK_OFFSET(xmm13_off), xmm13->as_VMReg());
236 map->set_callee_saved(STACK_OFFSET(xmm14_off), xmm14->as_VMReg());
237 map->set_callee_saved(STACK_OFFSET(xmm15_off), xmm15->as_VMReg());
239 // %%% These should all be a waste but we'll keep things as they were for now
240 if (true) {
241 map->set_callee_saved(STACK_OFFSET( raxH_off ), rax->as_VMReg()->next());
242 map->set_callee_saved(STACK_OFFSET( rcxH_off ), rcx->as_VMReg()->next());
243 map->set_callee_saved(STACK_OFFSET( rdxH_off ), rdx->as_VMReg()->next());
244 map->set_callee_saved(STACK_OFFSET( rbxH_off ), rbx->as_VMReg()->next());
245 // rbp location is known implicitly by the frame sender code, needs no oopmap
246 map->set_callee_saved(STACK_OFFSET( rsiH_off ), rsi->as_VMReg()->next());
247 map->set_callee_saved(STACK_OFFSET( rdiH_off ), rdi->as_VMReg()->next());
248 map->set_callee_saved(STACK_OFFSET( r8H_off ), r8->as_VMReg()->next());
249 map->set_callee_saved(STACK_OFFSET( r9H_off ), r9->as_VMReg()->next());
250 map->set_callee_saved(STACK_OFFSET( r10H_off ), r10->as_VMReg()->next());
251 map->set_callee_saved(STACK_OFFSET( r11H_off ), r11->as_VMReg()->next());
252 map->set_callee_saved(STACK_OFFSET( r12H_off ), r12->as_VMReg()->next());
253 map->set_callee_saved(STACK_OFFSET( r13H_off ), r13->as_VMReg()->next());
254 map->set_callee_saved(STACK_OFFSET( r14H_off ), r14->as_VMReg()->next());
255 map->set_callee_saved(STACK_OFFSET( r15H_off ), r15->as_VMReg()->next());
256 map->set_callee_saved(STACK_OFFSET(xmm0H_off ), xmm0->as_VMReg()->next());
257 map->set_callee_saved(STACK_OFFSET(xmm1H_off ), xmm1->as_VMReg()->next());
258 map->set_callee_saved(STACK_OFFSET(xmm2H_off ), xmm2->as_VMReg()->next());
259 map->set_callee_saved(STACK_OFFSET(xmm3H_off ), xmm3->as_VMReg()->next());
260 map->set_callee_saved(STACK_OFFSET(xmm4H_off ), xmm4->as_VMReg()->next());
261 map->set_callee_saved(STACK_OFFSET(xmm5H_off ), xmm5->as_VMReg()->next());
262 map->set_callee_saved(STACK_OFFSET(xmm6H_off ), xmm6->as_VMReg()->next());
263 map->set_callee_saved(STACK_OFFSET(xmm7H_off ), xmm7->as_VMReg()->next());
264 map->set_callee_saved(STACK_OFFSET(xmm8H_off ), xmm8->as_VMReg()->next());
265 map->set_callee_saved(STACK_OFFSET(xmm9H_off ), xmm9->as_VMReg()->next());
266 map->set_callee_saved(STACK_OFFSET(xmm10H_off), xmm10->as_VMReg()->next());
267 map->set_callee_saved(STACK_OFFSET(xmm11H_off), xmm11->as_VMReg()->next());
268 map->set_callee_saved(STACK_OFFSET(xmm12H_off), xmm12->as_VMReg()->next());
269 map->set_callee_saved(STACK_OFFSET(xmm13H_off), xmm13->as_VMReg()->next());
270 map->set_callee_saved(STACK_OFFSET(xmm14H_off), xmm14->as_VMReg()->next());
271 map->set_callee_saved(STACK_OFFSET(xmm15H_off), xmm15->as_VMReg()->next());
272 }
274 return map;
275 }
277 void RegisterSaver::restore_live_registers(MacroAssembler* masm, bool restore_vectors) {
278 if (frame::arg_reg_save_area_bytes != 0) {
279 // Pop arg register save area
280 __ addptr(rsp, frame::arg_reg_save_area_bytes);
281 }
282 #ifdef COMPILER2
283 if (restore_vectors) {
284 // Restore upper half of YMM registes.
285 assert(UseAVX > 0, "256bit vectors are supported only with AVX");
286 assert(MaxVectorSize == 32, "only 256bit vectors are supported now");
287 __ vinsertf128h(xmm0, Address(rsp, 0));
288 __ vinsertf128h(xmm1, Address(rsp, 16));
289 __ vinsertf128h(xmm2, Address(rsp, 32));
290 __ vinsertf128h(xmm3, Address(rsp, 48));
291 __ vinsertf128h(xmm4, Address(rsp, 64));
292 __ vinsertf128h(xmm5, Address(rsp, 80));
293 __ vinsertf128h(xmm6, Address(rsp, 96));
294 __ vinsertf128h(xmm7, Address(rsp,112));
295 __ vinsertf128h(xmm8, Address(rsp,128));
296 __ vinsertf128h(xmm9, Address(rsp,144));
297 __ vinsertf128h(xmm10, Address(rsp,160));
298 __ vinsertf128h(xmm11, Address(rsp,176));
299 __ vinsertf128h(xmm12, Address(rsp,192));
300 __ vinsertf128h(xmm13, Address(rsp,208));
301 __ vinsertf128h(xmm14, Address(rsp,224));
302 __ vinsertf128h(xmm15, Address(rsp,240));
303 __ addptr(rsp, 256);
304 }
305 #else
306 assert(!restore_vectors, "vectors are generated only by C2");
307 #endif
308 // Recover CPU state
309 __ pop_CPU_state();
310 // Get the rbp described implicitly by the calling convention (no oopMap)
311 __ pop(rbp);
312 }
314 void RegisterSaver::restore_result_registers(MacroAssembler* masm) {
316 // Just restore result register. Only used by deoptimization. By
317 // now any callee save register that needs to be restored to a c2
318 // caller of the deoptee has been extracted into the vframeArray
319 // and will be stuffed into the c2i adapter we create for later
320 // restoration so only result registers need to be restored here.
322 // Restore fp result register
323 __ movdbl(xmm0, Address(rsp, xmm0_offset_in_bytes()));
324 // Restore integer result register
325 __ movptr(rax, Address(rsp, rax_offset_in_bytes()));
326 __ movptr(rdx, Address(rsp, rdx_offset_in_bytes()));
328 // Pop all of the register save are off the stack except the return address
329 __ addptr(rsp, return_offset_in_bytes());
330 }
332 // Is vector's size (in bytes) bigger than a size saved by default?
333 // 16 bytes XMM registers are saved by default using fxsave/fxrstor instructions.
334 bool SharedRuntime::is_wide_vector(int size) {
335 return size > 16;
336 }
338 // The java_calling_convention describes stack locations as ideal slots on
339 // a frame with no abi restrictions. Since we must observe abi restrictions
340 // (like the placement of the register window) the slots must be biased by
341 // the following value.
342 static int reg2offset_in(VMReg r) {
343 // Account for saved rbp and return address
344 // This should really be in_preserve_stack_slots
345 return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size;
346 }
348 static int reg2offset_out(VMReg r) {
349 return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;
350 }
352 // ---------------------------------------------------------------------------
353 // Read the array of BasicTypes from a signature, and compute where the
354 // arguments should go. Values in the VMRegPair regs array refer to 4-byte
355 // quantities. Values less than VMRegImpl::stack0 are registers, those above
356 // refer to 4-byte stack slots. All stack slots are based off of the stack pointer
357 // as framesizes are fixed.
358 // VMRegImpl::stack0 refers to the first slot 0(sp).
359 // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register
360 // up to RegisterImpl::number_of_registers) are the 64-bit
361 // integer registers.
363 // Note: the INPUTS in sig_bt are in units of Java argument words, which are
364 // either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit
365 // units regardless of build. Of course for i486 there is no 64 bit build
367 // The Java calling convention is a "shifted" version of the C ABI.
368 // By skipping the first C ABI register we can call non-static jni methods
369 // with small numbers of arguments without having to shuffle the arguments
370 // at all. Since we control the java ABI we ought to at least get some
371 // advantage out of it.
373 int SharedRuntime::java_calling_convention(const BasicType *sig_bt,
374 VMRegPair *regs,
375 int total_args_passed,
376 int is_outgoing) {
378 // Create the mapping between argument positions and
379 // registers.
380 static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = {
381 j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5
382 };
383 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_j] = {
384 j_farg0, j_farg1, j_farg2, j_farg3,
385 j_farg4, j_farg5, j_farg6, j_farg7
386 };
389 uint int_args = 0;
390 uint fp_args = 0;
391 uint stk_args = 0; // inc by 2 each time
393 for (int i = 0; i < total_args_passed; i++) {
394 switch (sig_bt[i]) {
395 case T_BOOLEAN:
396 case T_CHAR:
397 case T_BYTE:
398 case T_SHORT:
399 case T_INT:
400 if (int_args < Argument::n_int_register_parameters_j) {
401 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
402 } else {
403 regs[i].set1(VMRegImpl::stack2reg(stk_args));
404 stk_args += 2;
405 }
406 break;
407 case T_VOID:
408 // halves of T_LONG or T_DOUBLE
409 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
410 regs[i].set_bad();
411 break;
412 case T_LONG:
413 assert(sig_bt[i + 1] == T_VOID, "expecting half");
414 // fall through
415 case T_OBJECT:
416 case T_ARRAY:
417 case T_ADDRESS:
418 if (int_args < Argument::n_int_register_parameters_j) {
419 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
420 } else {
421 regs[i].set2(VMRegImpl::stack2reg(stk_args));
422 stk_args += 2;
423 }
424 break;
425 case T_FLOAT:
426 if (fp_args < Argument::n_float_register_parameters_j) {
427 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
428 } else {
429 regs[i].set1(VMRegImpl::stack2reg(stk_args));
430 stk_args += 2;
431 }
432 break;
433 case T_DOUBLE:
434 assert(sig_bt[i + 1] == T_VOID, "expecting half");
435 if (fp_args < Argument::n_float_register_parameters_j) {
436 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
437 } else {
438 regs[i].set2(VMRegImpl::stack2reg(stk_args));
439 stk_args += 2;
440 }
441 break;
442 default:
443 ShouldNotReachHere();
444 break;
445 }
446 }
448 return round_to(stk_args, 2);
449 }
451 // Patch the callers callsite with entry to compiled code if it exists.
452 static void patch_callers_callsite(MacroAssembler *masm) {
453 Label L;
454 __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
455 __ jcc(Assembler::equal, L);
457 // Save the current stack pointer
458 __ mov(r13, rsp);
459 // Schedule the branch target address early.
460 // Call into the VM to patch the caller, then jump to compiled callee
461 // rax isn't live so capture return address while we easily can
462 __ movptr(rax, Address(rsp, 0));
464 // align stack so push_CPU_state doesn't fault
465 __ andptr(rsp, -(StackAlignmentInBytes));
466 __ push_CPU_state();
468 // VM needs caller's callsite
469 // VM needs target method
470 // This needs to be a long call since we will relocate this adapter to
471 // the codeBuffer and it may not reach
473 // Allocate argument register save area
474 if (frame::arg_reg_save_area_bytes != 0) {
475 __ subptr(rsp, frame::arg_reg_save_area_bytes);
476 }
477 __ mov(c_rarg0, rbx);
478 __ mov(c_rarg1, rax);
479 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));
481 // De-allocate argument register save area
482 if (frame::arg_reg_save_area_bytes != 0) {
483 __ addptr(rsp, frame::arg_reg_save_area_bytes);
484 }
486 __ pop_CPU_state();
487 // restore sp
488 __ mov(rsp, r13);
489 __ bind(L);
490 }
493 static void gen_c2i_adapter(MacroAssembler *masm,
494 int total_args_passed,
495 int comp_args_on_stack,
496 const BasicType *sig_bt,
497 const VMRegPair *regs,
498 Label& skip_fixup) {
499 // Before we get into the guts of the C2I adapter, see if we should be here
500 // at all. We've come from compiled code and are attempting to jump to the
501 // interpreter, which means the caller made a static call to get here
502 // (vcalls always get a compiled target if there is one). Check for a
503 // compiled target. If there is one, we need to patch the caller's call.
504 patch_callers_callsite(masm);
506 __ bind(skip_fixup);
508 // Since all args are passed on the stack, total_args_passed *
509 // Interpreter::stackElementSize is the space we need. Plus 1 because
510 // we also account for the return address location since
511 // we store it first rather than hold it in rax across all the shuffling
513 int extraspace = (total_args_passed * Interpreter::stackElementSize) + wordSize;
515 // stack is aligned, keep it that way
516 extraspace = round_to(extraspace, 2*wordSize);
518 // Get return address
519 __ pop(rax);
521 // set senderSP value
522 __ mov(r13, rsp);
524 __ subptr(rsp, extraspace);
526 // Store the return address in the expected location
527 __ movptr(Address(rsp, 0), rax);
529 // Now write the args into the outgoing interpreter space
530 for (int i = 0; i < total_args_passed; i++) {
531 if (sig_bt[i] == T_VOID) {
532 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
533 continue;
534 }
536 // offset to start parameters
537 int st_off = (total_args_passed - i) * Interpreter::stackElementSize;
538 int next_off = st_off - Interpreter::stackElementSize;
540 // Say 4 args:
541 // i st_off
542 // 0 32 T_LONG
543 // 1 24 T_VOID
544 // 2 16 T_OBJECT
545 // 3 8 T_BOOL
546 // - 0 return address
547 //
548 // However to make thing extra confusing. Because we can fit a long/double in
549 // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter
550 // leaves one slot empty and only stores to a single slot. In this case the
551 // slot that is occupied is the T_VOID slot. See I said it was confusing.
553 VMReg r_1 = regs[i].first();
554 VMReg r_2 = regs[i].second();
555 if (!r_1->is_valid()) {
556 assert(!r_2->is_valid(), "");
557 continue;
558 }
559 if (r_1->is_stack()) {
560 // memory to memory use rax
561 int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace;
562 if (!r_2->is_valid()) {
563 // sign extend??
564 __ movl(rax, Address(rsp, ld_off));
565 __ movptr(Address(rsp, st_off), rax);
567 } else {
569 __ movq(rax, Address(rsp, ld_off));
571 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
572 // T_DOUBLE and T_LONG use two slots in the interpreter
573 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
574 // ld_off == LSW, ld_off+wordSize == MSW
575 // st_off == MSW, next_off == LSW
576 __ movq(Address(rsp, next_off), rax);
577 #ifdef ASSERT
578 // Overwrite the unused slot with known junk
579 __ mov64(rax, CONST64(0xdeadffffdeadaaaa));
580 __ movptr(Address(rsp, st_off), rax);
581 #endif /* ASSERT */
582 } else {
583 __ movq(Address(rsp, st_off), rax);
584 }
585 }
586 } else if (r_1->is_Register()) {
587 Register r = r_1->as_Register();
588 if (!r_2->is_valid()) {
589 // must be only an int (or less ) so move only 32bits to slot
590 // why not sign extend??
591 __ movl(Address(rsp, st_off), r);
592 } else {
593 // Two VMREgs|OptoRegs can be T_OBJECT, T_ADDRESS, T_DOUBLE, T_LONG
594 // T_DOUBLE and T_LONG use two slots in the interpreter
595 if ( sig_bt[i] == T_LONG || sig_bt[i] == T_DOUBLE) {
596 // long/double in gpr
597 #ifdef ASSERT
598 // Overwrite the unused slot with known junk
599 __ mov64(rax, CONST64(0xdeadffffdeadaaab));
600 __ movptr(Address(rsp, st_off), rax);
601 #endif /* ASSERT */
602 __ movq(Address(rsp, next_off), r);
603 } else {
604 __ movptr(Address(rsp, st_off), r);
605 }
606 }
607 } else {
608 assert(r_1->is_XMMRegister(), "");
609 if (!r_2->is_valid()) {
610 // only a float use just part of the slot
611 __ movflt(Address(rsp, st_off), r_1->as_XMMRegister());
612 } else {
613 #ifdef ASSERT
614 // Overwrite the unused slot with known junk
615 __ mov64(rax, CONST64(0xdeadffffdeadaaac));
616 __ movptr(Address(rsp, st_off), rax);
617 #endif /* ASSERT */
618 __ movdbl(Address(rsp, next_off), r_1->as_XMMRegister());
619 }
620 }
621 }
623 // Schedule the branch target address early.
624 __ movptr(rcx, Address(rbx, in_bytes(Method::interpreter_entry_offset())));
625 __ jmp(rcx);
626 }
628 static void range_check(MacroAssembler* masm, Register pc_reg, Register temp_reg,
629 address code_start, address code_end,
630 Label& L_ok) {
631 Label L_fail;
632 __ lea(temp_reg, ExternalAddress(code_start));
633 __ cmpptr(pc_reg, temp_reg);
634 __ jcc(Assembler::belowEqual, L_fail);
635 __ lea(temp_reg, ExternalAddress(code_end));
636 __ cmpptr(pc_reg, temp_reg);
637 __ jcc(Assembler::below, L_ok);
638 __ bind(L_fail);
639 }
641 static void gen_i2c_adapter(MacroAssembler *masm,
642 int total_args_passed,
643 int comp_args_on_stack,
644 const BasicType *sig_bt,
645 const VMRegPair *regs) {
647 // Note: r13 contains the senderSP on entry. We must preserve it since
648 // we may do a i2c -> c2i transition if we lose a race where compiled
649 // code goes non-entrant while we get args ready.
650 // In addition we use r13 to locate all the interpreter args as
651 // we must align the stack to 16 bytes on an i2c entry else we
652 // lose alignment we expect in all compiled code and register
653 // save code can segv when fxsave instructions find improperly
654 // aligned stack pointer.
656 // Adapters can be frameless because they do not require the caller
657 // to perform additional cleanup work, such as correcting the stack pointer.
658 // An i2c adapter is frameless because the *caller* frame, which is interpreted,
659 // routinely repairs its own stack pointer (from interpreter_frame_last_sp),
660 // even if a callee has modified the stack pointer.
661 // A c2i adapter is frameless because the *callee* frame, which is interpreted,
662 // routinely repairs its caller's stack pointer (from sender_sp, which is set
663 // up via the senderSP register).
664 // In other words, if *either* the caller or callee is interpreted, we can
665 // get the stack pointer repaired after a call.
666 // This is why c2i and i2c adapters cannot be indefinitely composed.
667 // In particular, if a c2i adapter were to somehow call an i2c adapter,
668 // both caller and callee would be compiled methods, and neither would
669 // clean up the stack pointer changes performed by the two adapters.
670 // If this happens, control eventually transfers back to the compiled
671 // caller, but with an uncorrected stack, causing delayed havoc.
673 // Pick up the return address
674 __ movptr(rax, Address(rsp, 0));
676 if (VerifyAdapterCalls &&
677 (Interpreter::code() != NULL || StubRoutines::code1() != NULL)) {
678 // So, let's test for cascading c2i/i2c adapters right now.
679 // assert(Interpreter::contains($return_addr) ||
680 // StubRoutines::contains($return_addr),
681 // "i2c adapter must return to an interpreter frame");
682 __ block_comment("verify_i2c { ");
683 Label L_ok;
684 if (Interpreter::code() != NULL)
685 range_check(masm, rax, r11,
686 Interpreter::code()->code_start(), Interpreter::code()->code_end(),
687 L_ok);
688 if (StubRoutines::code1() != NULL)
689 range_check(masm, rax, r11,
690 StubRoutines::code1()->code_begin(), StubRoutines::code1()->code_end(),
691 L_ok);
692 if (StubRoutines::code2() != NULL)
693 range_check(masm, rax, r11,
694 StubRoutines::code2()->code_begin(), StubRoutines::code2()->code_end(),
695 L_ok);
696 const char* msg = "i2c adapter must return to an interpreter frame";
697 __ block_comment(msg);
698 __ stop(msg);
699 __ bind(L_ok);
700 __ block_comment("} verify_i2ce ");
701 }
703 // Must preserve original SP for loading incoming arguments because
704 // we need to align the outgoing SP for compiled code.
705 __ movptr(r11, rsp);
707 // Cut-out for having no stack args. Since up to 2 int/oop args are passed
708 // in registers, we will occasionally have no stack args.
709 int comp_words_on_stack = 0;
710 if (comp_args_on_stack) {
711 // Sig words on the stack are greater-than VMRegImpl::stack0. Those in
712 // registers are below. By subtracting stack0, we either get a negative
713 // number (all values in registers) or the maximum stack slot accessed.
715 // Convert 4-byte c2 stack slots to words.
716 comp_words_on_stack = round_to(comp_args_on_stack*VMRegImpl::stack_slot_size, wordSize)>>LogBytesPerWord;
717 // Round up to miminum stack alignment, in wordSize
718 comp_words_on_stack = round_to(comp_words_on_stack, 2);
719 __ subptr(rsp, comp_words_on_stack * wordSize);
720 }
723 // Ensure compiled code always sees stack at proper alignment
724 __ andptr(rsp, -16);
726 // push the return address and misalign the stack that youngest frame always sees
727 // as far as the placement of the call instruction
728 __ push(rax);
730 // Put saved SP in another register
731 const Register saved_sp = rax;
732 __ movptr(saved_sp, r11);
734 // Will jump to the compiled code just as if compiled code was doing it.
735 // Pre-load the register-jump target early, to schedule it better.
736 __ movptr(r11, Address(rbx, in_bytes(Method::from_compiled_offset())));
738 // Now generate the shuffle code. Pick up all register args and move the
739 // rest through the floating point stack top.
740 for (int i = 0; i < total_args_passed; i++) {
741 if (sig_bt[i] == T_VOID) {
742 // Longs and doubles are passed in native word order, but misaligned
743 // in the 32-bit build.
744 assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");
745 continue;
746 }
748 // Pick up 0, 1 or 2 words from SP+offset.
750 assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(),
751 "scrambled load targets?");
752 // Load in argument order going down.
753 int ld_off = (total_args_passed - i)*Interpreter::stackElementSize;
754 // Point to interpreter value (vs. tag)
755 int next_off = ld_off - Interpreter::stackElementSize;
756 //
757 //
758 //
759 VMReg r_1 = regs[i].first();
760 VMReg r_2 = regs[i].second();
761 if (!r_1->is_valid()) {
762 assert(!r_2->is_valid(), "");
763 continue;
764 }
765 if (r_1->is_stack()) {
766 // Convert stack slot to an SP offset (+ wordSize to account for return address )
767 int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize;
769 // We can use r13 as a temp here because compiled code doesn't need r13 as an input
770 // and if we end up going thru a c2i because of a miss a reasonable value of r13
771 // will be generated.
772 if (!r_2->is_valid()) {
773 // sign extend???
774 __ movl(r13, Address(saved_sp, ld_off));
775 __ movptr(Address(rsp, st_off), r13);
776 } else {
777 //
778 // We are using two optoregs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
779 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
780 // So we must adjust where to pick up the data to match the interpreter.
781 //
782 // Interpreter local[n] == MSW, local[n+1] == LSW however locals
783 // are accessed as negative so LSW is at LOW address
785 // ld_off is MSW so get LSW
786 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
787 next_off : ld_off;
788 __ movq(r13, Address(saved_sp, offset));
789 // st_off is LSW (i.e. reg.first())
790 __ movq(Address(rsp, st_off), r13);
791 }
792 } else if (r_1->is_Register()) { // Register argument
793 Register r = r_1->as_Register();
794 assert(r != rax, "must be different");
795 if (r_2->is_valid()) {
796 //
797 // We are using two VMRegs. This can be either T_OBJECT, T_ADDRESS, T_LONG, or T_DOUBLE
798 // the interpreter allocates two slots but only uses one for thr T_LONG or T_DOUBLE case
799 // So we must adjust where to pick up the data to match the interpreter.
801 const int offset = (sig_bt[i]==T_LONG||sig_bt[i]==T_DOUBLE)?
802 next_off : ld_off;
804 // this can be a misaligned move
805 __ movq(r, Address(saved_sp, offset));
806 } else {
807 // sign extend and use a full word?
808 __ movl(r, Address(saved_sp, ld_off));
809 }
810 } else {
811 if (!r_2->is_valid()) {
812 __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off));
813 } else {
814 __ movdbl(r_1->as_XMMRegister(), Address(saved_sp, next_off));
815 }
816 }
817 }
819 // 6243940 We might end up in handle_wrong_method if
820 // the callee is deoptimized as we race thru here. If that
821 // happens we don't want to take a safepoint because the
822 // caller frame will look interpreted and arguments are now
823 // "compiled" so it is much better to make this transition
824 // invisible to the stack walking code. Unfortunately if
825 // we try and find the callee by normal means a safepoint
826 // is possible. So we stash the desired callee in the thread
827 // and the vm will find there should this case occur.
829 __ movptr(Address(r15_thread, JavaThread::callee_target_offset()), rbx);
831 // put Method* where a c2i would expect should we end up there
832 // only needed becaus eof c2 resolve stubs return Method* as a result in
833 // rax
834 __ mov(rax, rbx);
835 __ jmp(r11);
836 }
838 // ---------------------------------------------------------------
839 AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm,
840 int total_args_passed,
841 int comp_args_on_stack,
842 const BasicType *sig_bt,
843 const VMRegPair *regs,
844 AdapterFingerPrint* fingerprint) {
845 address i2c_entry = __ pc();
847 gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs);
849 // -------------------------------------------------------------------------
850 // Generate a C2I adapter. On entry we know rbx holds the Method* during calls
851 // to the interpreter. The args start out packed in the compiled layout. They
852 // need to be unpacked into the interpreter layout. This will almost always
853 // require some stack space. We grow the current (compiled) stack, then repack
854 // the args. We finally end in a jump to the generic interpreter entry point.
855 // On exit from the interpreter, the interpreter will restore our SP (lest the
856 // compiled code, which relys solely on SP and not RBP, get sick).
858 address c2i_unverified_entry = __ pc();
859 Label skip_fixup;
860 Label ok;
862 Register holder = rax;
863 Register receiver = j_rarg0;
864 Register temp = rbx;
866 {
867 __ load_klass(temp, receiver);
868 __ cmpptr(temp, Address(holder, CompiledICHolder::holder_klass_offset()));
869 __ movptr(rbx, Address(holder, CompiledICHolder::holder_method_offset()));
870 __ jcc(Assembler::equal, ok);
871 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
873 __ bind(ok);
874 // Method might have been compiled since the call site was patched to
875 // interpreted if that is the case treat it as a miss so we can get
876 // the call site corrected.
877 __ cmpptr(Address(rbx, in_bytes(Method::code_offset())), (int32_t)NULL_WORD);
878 __ jcc(Assembler::equal, skip_fixup);
879 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
880 }
882 address c2i_entry = __ pc();
884 gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup);
886 __ flush();
887 return AdapterHandlerLibrary::new_entry(fingerprint, i2c_entry, c2i_entry, c2i_unverified_entry);
888 }
890 int SharedRuntime::c_calling_convention(const BasicType *sig_bt,
891 VMRegPair *regs,
892 VMRegPair *regs2,
893 int total_args_passed) {
894 assert(regs2 == NULL, "not needed on x86");
895 // We return the amount of VMRegImpl stack slots we need to reserve for all
896 // the arguments NOT counting out_preserve_stack_slots.
898 // NOTE: These arrays will have to change when c1 is ported
899 #ifdef _WIN64
900 static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
901 c_rarg0, c_rarg1, c_rarg2, c_rarg3
902 };
903 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
904 c_farg0, c_farg1, c_farg2, c_farg3
905 };
906 #else
907 static const Register INT_ArgReg[Argument::n_int_register_parameters_c] = {
908 c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, c_rarg5
909 };
910 static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_c] = {
911 c_farg0, c_farg1, c_farg2, c_farg3,
912 c_farg4, c_farg5, c_farg6, c_farg7
913 };
914 #endif // _WIN64
917 uint int_args = 0;
918 uint fp_args = 0;
919 uint stk_args = 0; // inc by 2 each time
921 for (int i = 0; i < total_args_passed; i++) {
922 switch (sig_bt[i]) {
923 case T_BOOLEAN:
924 case T_CHAR:
925 case T_BYTE:
926 case T_SHORT:
927 case T_INT:
928 if (int_args < Argument::n_int_register_parameters_c) {
929 regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());
930 #ifdef _WIN64
931 fp_args++;
932 // Allocate slots for callee to stuff register args the stack.
933 stk_args += 2;
934 #endif
935 } else {
936 regs[i].set1(VMRegImpl::stack2reg(stk_args));
937 stk_args += 2;
938 }
939 break;
940 case T_LONG:
941 assert(sig_bt[i + 1] == T_VOID, "expecting half");
942 // fall through
943 case T_OBJECT:
944 case T_ARRAY:
945 case T_ADDRESS:
946 case T_METADATA:
947 if (int_args < Argument::n_int_register_parameters_c) {
948 regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());
949 #ifdef _WIN64
950 fp_args++;
951 stk_args += 2;
952 #endif
953 } else {
954 regs[i].set2(VMRegImpl::stack2reg(stk_args));
955 stk_args += 2;
956 }
957 break;
958 case T_FLOAT:
959 if (fp_args < Argument::n_float_register_parameters_c) {
960 regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());
961 #ifdef _WIN64
962 int_args++;
963 // Allocate slots for callee to stuff register args the stack.
964 stk_args += 2;
965 #endif
966 } else {
967 regs[i].set1(VMRegImpl::stack2reg(stk_args));
968 stk_args += 2;
969 }
970 break;
971 case T_DOUBLE:
972 assert(sig_bt[i + 1] == T_VOID, "expecting half");
973 if (fp_args < Argument::n_float_register_parameters_c) {
974 regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());
975 #ifdef _WIN64
976 int_args++;
977 // Allocate slots for callee to stuff register args the stack.
978 stk_args += 2;
979 #endif
980 } else {
981 regs[i].set2(VMRegImpl::stack2reg(stk_args));
982 stk_args += 2;
983 }
984 break;
985 case T_VOID: // Halves of longs and doubles
986 assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");
987 regs[i].set_bad();
988 break;
989 default:
990 ShouldNotReachHere();
991 break;
992 }
993 }
994 #ifdef _WIN64
995 // windows abi requires that we always allocate enough stack space
996 // for 4 64bit registers to be stored down.
997 if (stk_args < 8) {
998 stk_args = 8;
999 }
1000 #endif // _WIN64
1002 return stk_args;
1003 }
1005 // On 64 bit we will store integer like items to the stack as
1006 // 64 bits items (sparc abi) even though java would only store
1007 // 32bits for a parameter. On 32bit it will simply be 32 bits
1008 // So this routine will do 32->32 on 32bit and 32->64 on 64bit
1009 static void move32_64(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1010 if (src.first()->is_stack()) {
1011 if (dst.first()->is_stack()) {
1012 // stack to stack
1013 __ movslq(rax, Address(rbp, reg2offset_in(src.first())));
1014 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1015 } else {
1016 // stack to reg
1017 __ movslq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
1018 }
1019 } else if (dst.first()->is_stack()) {
1020 // reg to stack
1021 // Do we really have to sign extend???
1022 // __ movslq(src.first()->as_Register(), src.first()->as_Register());
1023 __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
1024 } else {
1025 // Do we really have to sign extend???
1026 // __ movslq(dst.first()->as_Register(), src.first()->as_Register());
1027 if (dst.first() != src.first()) {
1028 __ movq(dst.first()->as_Register(), src.first()->as_Register());
1029 }
1030 }
1031 }
1033 static void move_ptr(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1034 if (src.first()->is_stack()) {
1035 if (dst.first()->is_stack()) {
1036 // stack to stack
1037 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
1038 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1039 } else {
1040 // stack to reg
1041 __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first())));
1042 }
1043 } else if (dst.first()->is_stack()) {
1044 // reg to stack
1045 __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
1046 } else {
1047 if (dst.first() != src.first()) {
1048 __ movq(dst.first()->as_Register(), src.first()->as_Register());
1049 }
1050 }
1051 }
1053 // An oop arg. Must pass a handle not the oop itself
1054 static void object_move(MacroAssembler* masm,
1055 OopMap* map,
1056 int oop_handle_offset,
1057 int framesize_in_slots,
1058 VMRegPair src,
1059 VMRegPair dst,
1060 bool is_receiver,
1061 int* receiver_offset) {
1063 // must pass a handle. First figure out the location we use as a handle
1065 Register rHandle = dst.first()->is_stack() ? rax : dst.first()->as_Register();
1067 // See if oop is NULL if it is we need no handle
1069 if (src.first()->is_stack()) {
1071 // Oop is already on the stack as an argument
1072 int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1073 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots));
1074 if (is_receiver) {
1075 *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size;
1076 }
1078 __ cmpptr(Address(rbp, reg2offset_in(src.first())), (int32_t)NULL_WORD);
1079 __ lea(rHandle, Address(rbp, reg2offset_in(src.first())));
1080 // conditionally move a NULL
1081 __ cmovptr(Assembler::equal, rHandle, Address(rbp, reg2offset_in(src.first())));
1082 } else {
1084 // Oop is in an a register we must store it to the space we reserve
1085 // on the stack for oop_handles and pass a handle if oop is non-NULL
1087 const Register rOop = src.first()->as_Register();
1088 int oop_slot;
1089 if (rOop == j_rarg0)
1090 oop_slot = 0;
1091 else if (rOop == j_rarg1)
1092 oop_slot = 1;
1093 else if (rOop == j_rarg2)
1094 oop_slot = 2;
1095 else if (rOop == j_rarg3)
1096 oop_slot = 3;
1097 else if (rOop == j_rarg4)
1098 oop_slot = 4;
1099 else {
1100 assert(rOop == j_rarg5, "wrong register");
1101 oop_slot = 5;
1102 }
1104 oop_slot = oop_slot * VMRegImpl::slots_per_word + oop_handle_offset;
1105 int offset = oop_slot*VMRegImpl::stack_slot_size;
1107 map->set_oop(VMRegImpl::stack2reg(oop_slot));
1108 // Store oop in handle area, may be NULL
1109 __ movptr(Address(rsp, offset), rOop);
1110 if (is_receiver) {
1111 *receiver_offset = offset;
1112 }
1114 __ cmpptr(rOop, (int32_t)NULL_WORD);
1115 __ lea(rHandle, Address(rsp, offset));
1116 // conditionally move a NULL from the handle area where it was just stored
1117 __ cmovptr(Assembler::equal, rHandle, Address(rsp, offset));
1118 }
1120 // If arg is on the stack then place it otherwise it is already in correct reg.
1121 if (dst.first()->is_stack()) {
1122 __ movptr(Address(rsp, reg2offset_out(dst.first())), rHandle);
1123 }
1124 }
1126 // A float arg may have to do float reg int reg conversion
1127 static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1128 assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move");
1130 // The calling conventions assures us that each VMregpair is either
1131 // all really one physical register or adjacent stack slots.
1132 // This greatly simplifies the cases here compared to sparc.
1134 if (src.first()->is_stack()) {
1135 if (dst.first()->is_stack()) {
1136 __ movl(rax, Address(rbp, reg2offset_in(src.first())));
1137 __ movptr(Address(rsp, reg2offset_out(dst.first())), rax);
1138 } else {
1139 // stack to reg
1140 assert(dst.first()->is_XMMRegister(), "only expect xmm registers as parameters");
1141 __ movflt(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_in(src.first())));
1142 }
1143 } else if (dst.first()->is_stack()) {
1144 // reg to stack
1145 assert(src.first()->is_XMMRegister(), "only expect xmm registers as parameters");
1146 __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1147 } else {
1148 // reg to reg
1149 // In theory these overlap but the ordering is such that this is likely a nop
1150 if ( src.first() != dst.first()) {
1151 __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());
1152 }
1153 }
1154 }
1156 // A long move
1157 static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1159 // The calling conventions assures us that each VMregpair is either
1160 // all really one physical register or adjacent stack slots.
1161 // This greatly simplifies the cases here compared to sparc.
1163 if (src.is_single_phys_reg() ) {
1164 if (dst.is_single_phys_reg()) {
1165 if (dst.first() != src.first()) {
1166 __ mov(dst.first()->as_Register(), src.first()->as_Register());
1167 }
1168 } else {
1169 assert(dst.is_single_reg(), "not a stack pair");
1170 __ movq(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register());
1171 }
1172 } else if (dst.is_single_phys_reg()) {
1173 assert(src.is_single_reg(), "not a stack pair");
1174 __ movq(dst.first()->as_Register(), Address(rbp, reg2offset_out(src.first())));
1175 } else {
1176 assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
1177 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
1178 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1179 }
1180 }
1182 // A double move
1183 static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) {
1185 // The calling conventions assures us that each VMregpair is either
1186 // all really one physical register or adjacent stack slots.
1187 // This greatly simplifies the cases here compared to sparc.
1189 if (src.is_single_phys_reg() ) {
1190 if (dst.is_single_phys_reg()) {
1191 // In theory these overlap but the ordering is such that this is likely a nop
1192 if ( src.first() != dst.first()) {
1193 __ movdbl(dst.first()->as_XMMRegister(), src.first()->as_XMMRegister());
1194 }
1195 } else {
1196 assert(dst.is_single_reg(), "not a stack pair");
1197 __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister());
1198 }
1199 } else if (dst.is_single_phys_reg()) {
1200 assert(src.is_single_reg(), "not a stack pair");
1201 __ movdbl(dst.first()->as_XMMRegister(), Address(rbp, reg2offset_out(src.first())));
1202 } else {
1203 assert(src.is_single_reg() && dst.is_single_reg(), "not stack pairs");
1204 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
1205 __ movq(Address(rsp, reg2offset_out(dst.first())), rax);
1206 }
1207 }
1210 void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1211 // We always ignore the frame_slots arg and just use the space just below frame pointer
1212 // which by this time is free to use
1213 switch (ret_type) {
1214 case T_FLOAT:
1215 __ movflt(Address(rbp, -wordSize), xmm0);
1216 break;
1217 case T_DOUBLE:
1218 __ movdbl(Address(rbp, -wordSize), xmm0);
1219 break;
1220 case T_VOID: break;
1221 default: {
1222 __ movptr(Address(rbp, -wordSize), rax);
1223 }
1224 }
1225 }
1227 void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) {
1228 // We always ignore the frame_slots arg and just use the space just below frame pointer
1229 // which by this time is free to use
1230 switch (ret_type) {
1231 case T_FLOAT:
1232 __ movflt(xmm0, Address(rbp, -wordSize));
1233 break;
1234 case T_DOUBLE:
1235 __ movdbl(xmm0, Address(rbp, -wordSize));
1236 break;
1237 case T_VOID: break;
1238 default: {
1239 __ movptr(rax, Address(rbp, -wordSize));
1240 }
1241 }
1242 }
1244 static void save_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
1245 for ( int i = first_arg ; i < arg_count ; i++ ) {
1246 if (args[i].first()->is_Register()) {
1247 __ push(args[i].first()->as_Register());
1248 } else if (args[i].first()->is_XMMRegister()) {
1249 __ subptr(rsp, 2*wordSize);
1250 __ movdbl(Address(rsp, 0), args[i].first()->as_XMMRegister());
1251 }
1252 }
1253 }
1255 static void restore_args(MacroAssembler *masm, int arg_count, int first_arg, VMRegPair *args) {
1256 for ( int i = arg_count - 1 ; i >= first_arg ; i-- ) {
1257 if (args[i].first()->is_Register()) {
1258 __ pop(args[i].first()->as_Register());
1259 } else if (args[i].first()->is_XMMRegister()) {
1260 __ movdbl(args[i].first()->as_XMMRegister(), Address(rsp, 0));
1261 __ addptr(rsp, 2*wordSize);
1262 }
1263 }
1264 }
1267 static void save_or_restore_arguments(MacroAssembler* masm,
1268 const int stack_slots,
1269 const int total_in_args,
1270 const int arg_save_area,
1271 OopMap* map,
1272 VMRegPair* in_regs,
1273 BasicType* in_sig_bt) {
1274 // if map is non-NULL then the code should store the values,
1275 // otherwise it should load them.
1276 int slot = arg_save_area;
1277 // Save down double word first
1278 for ( int i = 0; i < total_in_args; i++) {
1279 if (in_regs[i].first()->is_XMMRegister() && in_sig_bt[i] == T_DOUBLE) {
1280 int offset = slot * VMRegImpl::stack_slot_size;
1281 slot += VMRegImpl::slots_per_word;
1282 assert(slot <= stack_slots, "overflow");
1283 if (map != NULL) {
1284 __ movdbl(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
1285 } else {
1286 __ movdbl(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
1287 }
1288 }
1289 if (in_regs[i].first()->is_Register() &&
1290 (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_ARRAY)) {
1291 int offset = slot * VMRegImpl::stack_slot_size;
1292 if (map != NULL) {
1293 __ movq(Address(rsp, offset), in_regs[i].first()->as_Register());
1294 if (in_sig_bt[i] == T_ARRAY) {
1295 map->set_oop(VMRegImpl::stack2reg(slot));;
1296 }
1297 } else {
1298 __ movq(in_regs[i].first()->as_Register(), Address(rsp, offset));
1299 }
1300 slot += VMRegImpl::slots_per_word;
1301 }
1302 }
1303 // Save or restore single word registers
1304 for ( int i = 0; i < total_in_args; i++) {
1305 if (in_regs[i].first()->is_Register()) {
1306 int offset = slot * VMRegImpl::stack_slot_size;
1307 slot++;
1308 assert(slot <= stack_slots, "overflow");
1310 // Value is in an input register pass we must flush it to the stack
1311 const Register reg = in_regs[i].first()->as_Register();
1312 switch (in_sig_bt[i]) {
1313 case T_BOOLEAN:
1314 case T_CHAR:
1315 case T_BYTE:
1316 case T_SHORT:
1317 case T_INT:
1318 if (map != NULL) {
1319 __ movl(Address(rsp, offset), reg);
1320 } else {
1321 __ movl(reg, Address(rsp, offset));
1322 }
1323 break;
1324 case T_ARRAY:
1325 case T_LONG:
1326 // handled above
1327 break;
1328 case T_OBJECT:
1329 default: ShouldNotReachHere();
1330 }
1331 } else if (in_regs[i].first()->is_XMMRegister()) {
1332 if (in_sig_bt[i] == T_FLOAT) {
1333 int offset = slot * VMRegImpl::stack_slot_size;
1334 slot++;
1335 assert(slot <= stack_slots, "overflow");
1336 if (map != NULL) {
1337 __ movflt(Address(rsp, offset), in_regs[i].first()->as_XMMRegister());
1338 } else {
1339 __ movflt(in_regs[i].first()->as_XMMRegister(), Address(rsp, offset));
1340 }
1341 }
1342 } else if (in_regs[i].first()->is_stack()) {
1343 if (in_sig_bt[i] == T_ARRAY && map != NULL) {
1344 int offset_in_older_frame = in_regs[i].first()->reg2stack() + SharedRuntime::out_preserve_stack_slots();
1345 map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + stack_slots));
1346 }
1347 }
1348 }
1349 }
1352 // Check GC_locker::needs_gc and enter the runtime if it's true. This
1353 // keeps a new JNI critical region from starting until a GC has been
1354 // forced. Save down any oops in registers and describe them in an
1355 // OopMap.
1356 static void check_needs_gc_for_critical_native(MacroAssembler* masm,
1357 int stack_slots,
1358 int total_c_args,
1359 int total_in_args,
1360 int arg_save_area,
1361 OopMapSet* oop_maps,
1362 VMRegPair* in_regs,
1363 BasicType* in_sig_bt) {
1364 __ block_comment("check GC_locker::needs_gc");
1365 Label cont;
1366 __ cmp8(ExternalAddress((address)GC_locker::needs_gc_address()), false);
1367 __ jcc(Assembler::equal, cont);
1369 // Save down any incoming oops and call into the runtime to halt for a GC
1371 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1372 save_or_restore_arguments(masm, stack_slots, total_in_args,
1373 arg_save_area, map, in_regs, in_sig_bt);
1375 address the_pc = __ pc();
1376 oop_maps->add_gc_map( __ offset(), map);
1377 __ set_last_Java_frame(rsp, noreg, the_pc);
1379 __ block_comment("block_for_jni_critical");
1380 __ movptr(c_rarg0, r15_thread);
1381 __ mov(r12, rsp); // remember sp
1382 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
1383 __ andptr(rsp, -16); // align stack as required by ABI
1384 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::block_for_jni_critical)));
1385 __ mov(rsp, r12); // restore sp
1386 __ reinit_heapbase();
1388 __ reset_last_Java_frame(false, true);
1390 save_or_restore_arguments(masm, stack_slots, total_in_args,
1391 arg_save_area, NULL, in_regs, in_sig_bt);
1393 __ bind(cont);
1394 #ifdef ASSERT
1395 if (StressCriticalJNINatives) {
1396 // Stress register saving
1397 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
1398 save_or_restore_arguments(masm, stack_slots, total_in_args,
1399 arg_save_area, map, in_regs, in_sig_bt);
1400 // Destroy argument registers
1401 for (int i = 0; i < total_in_args - 1; i++) {
1402 if (in_regs[i].first()->is_Register()) {
1403 const Register reg = in_regs[i].first()->as_Register();
1404 __ xorptr(reg, reg);
1405 } else if (in_regs[i].first()->is_XMMRegister()) {
1406 __ xorpd(in_regs[i].first()->as_XMMRegister(), in_regs[i].first()->as_XMMRegister());
1407 } else if (in_regs[i].first()->is_FloatRegister()) {
1408 ShouldNotReachHere();
1409 } else if (in_regs[i].first()->is_stack()) {
1410 // Nothing to do
1411 } else {
1412 ShouldNotReachHere();
1413 }
1414 if (in_sig_bt[i] == T_LONG || in_sig_bt[i] == T_DOUBLE) {
1415 i++;
1416 }
1417 }
1419 save_or_restore_arguments(masm, stack_slots, total_in_args,
1420 arg_save_area, NULL, in_regs, in_sig_bt);
1421 }
1422 #endif
1423 }
1425 // Unpack an array argument into a pointer to the body and the length
1426 // if the array is non-null, otherwise pass 0 for both.
1427 static void unpack_array_argument(MacroAssembler* masm, VMRegPair reg, BasicType in_elem_type, VMRegPair body_arg, VMRegPair length_arg) {
1428 Register tmp_reg = rax;
1429 assert(!body_arg.first()->is_Register() || body_arg.first()->as_Register() != tmp_reg,
1430 "possible collision");
1431 assert(!length_arg.first()->is_Register() || length_arg.first()->as_Register() != tmp_reg,
1432 "possible collision");
1434 __ block_comment("unpack_array_argument {");
1436 // Pass the length, ptr pair
1437 Label is_null, done;
1438 VMRegPair tmp;
1439 tmp.set_ptr(tmp_reg->as_VMReg());
1440 if (reg.first()->is_stack()) {
1441 // Load the arg up from the stack
1442 move_ptr(masm, reg, tmp);
1443 reg = tmp;
1444 }
1445 __ testptr(reg.first()->as_Register(), reg.first()->as_Register());
1446 __ jccb(Assembler::equal, is_null);
1447 __ lea(tmp_reg, Address(reg.first()->as_Register(), arrayOopDesc::base_offset_in_bytes(in_elem_type)));
1448 move_ptr(masm, tmp, body_arg);
1449 // load the length relative to the body.
1450 __ movl(tmp_reg, Address(tmp_reg, arrayOopDesc::length_offset_in_bytes() -
1451 arrayOopDesc::base_offset_in_bytes(in_elem_type)));
1452 move32_64(masm, tmp, length_arg);
1453 __ jmpb(done);
1454 __ bind(is_null);
1455 // Pass zeros
1456 __ xorptr(tmp_reg, tmp_reg);
1457 move_ptr(masm, tmp, body_arg);
1458 move32_64(masm, tmp, length_arg);
1459 __ bind(done);
1461 __ block_comment("} unpack_array_argument");
1462 }
1465 // Different signatures may require very different orders for the move
1466 // to avoid clobbering other arguments. There's no simple way to
1467 // order them safely. Compute a safe order for issuing stores and
1468 // break any cycles in those stores. This code is fairly general but
1469 // it's not necessary on the other platforms so we keep it in the
1470 // platform dependent code instead of moving it into a shared file.
1471 // (See bugs 7013347 & 7145024.)
1472 // Note that this code is specific to LP64.
1473 class ComputeMoveOrder: public StackObj {
1474 class MoveOperation: public ResourceObj {
1475 friend class ComputeMoveOrder;
1476 private:
1477 VMRegPair _src;
1478 VMRegPair _dst;
1479 int _src_index;
1480 int _dst_index;
1481 bool _processed;
1482 MoveOperation* _next;
1483 MoveOperation* _prev;
1485 static int get_id(VMRegPair r) {
1486 return r.first()->value();
1487 }
1489 public:
1490 MoveOperation(int src_index, VMRegPair src, int dst_index, VMRegPair dst):
1491 _src(src)
1492 , _src_index(src_index)
1493 , _dst(dst)
1494 , _dst_index(dst_index)
1495 , _next(NULL)
1496 , _prev(NULL)
1497 , _processed(false) {
1498 }
1500 VMRegPair src() const { return _src; }
1501 int src_id() const { return get_id(src()); }
1502 int src_index() const { return _src_index; }
1503 VMRegPair dst() const { return _dst; }
1504 void set_dst(int i, VMRegPair dst) { _dst_index = i, _dst = dst; }
1505 int dst_index() const { return _dst_index; }
1506 int dst_id() const { return get_id(dst()); }
1507 MoveOperation* next() const { return _next; }
1508 MoveOperation* prev() const { return _prev; }
1509 void set_processed() { _processed = true; }
1510 bool is_processed() const { return _processed; }
1512 // insert
1513 void break_cycle(VMRegPair temp_register) {
1514 // create a new store following the last store
1515 // to move from the temp_register to the original
1516 MoveOperation* new_store = new MoveOperation(-1, temp_register, dst_index(), dst());
1518 // break the cycle of links and insert new_store at the end
1519 // break the reverse link.
1520 MoveOperation* p = prev();
1521 assert(p->next() == this, "must be");
1522 _prev = NULL;
1523 p->_next = new_store;
1524 new_store->_prev = p;
1526 // change the original store to save it's value in the temp.
1527 set_dst(-1, temp_register);
1528 }
1530 void link(GrowableArray<MoveOperation*>& killer) {
1531 // link this store in front the store that it depends on
1532 MoveOperation* n = killer.at_grow(src_id(), NULL);
1533 if (n != NULL) {
1534 assert(_next == NULL && n->_prev == NULL, "shouldn't have been set yet");
1535 _next = n;
1536 n->_prev = this;
1537 }
1538 }
1539 };
1541 private:
1542 GrowableArray<MoveOperation*> edges;
1544 public:
1545 ComputeMoveOrder(int total_in_args, VMRegPair* in_regs, int total_c_args, VMRegPair* out_regs,
1546 BasicType* in_sig_bt, GrowableArray<int>& arg_order, VMRegPair tmp_vmreg) {
1547 // Move operations where the dest is the stack can all be
1548 // scheduled first since they can't interfere with the other moves.
1549 for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {
1550 if (in_sig_bt[i] == T_ARRAY) {
1551 c_arg--;
1552 if (out_regs[c_arg].first()->is_stack() &&
1553 out_regs[c_arg + 1].first()->is_stack()) {
1554 arg_order.push(i);
1555 arg_order.push(c_arg);
1556 } else {
1557 if (out_regs[c_arg].first()->is_stack() ||
1558 in_regs[i].first() == out_regs[c_arg].first()) {
1559 add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg + 1]);
1560 } else {
1561 add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);
1562 }
1563 }
1564 } else if (in_sig_bt[i] == T_VOID) {
1565 arg_order.push(i);
1566 arg_order.push(c_arg);
1567 } else {
1568 if (out_regs[c_arg].first()->is_stack() ||
1569 in_regs[i].first() == out_regs[c_arg].first()) {
1570 arg_order.push(i);
1571 arg_order.push(c_arg);
1572 } else {
1573 add_edge(i, in_regs[i].first(), c_arg, out_regs[c_arg]);
1574 }
1575 }
1576 }
1577 // Break any cycles in the register moves and emit the in the
1578 // proper order.
1579 GrowableArray<MoveOperation*>* stores = get_store_order(tmp_vmreg);
1580 for (int i = 0; i < stores->length(); i++) {
1581 arg_order.push(stores->at(i)->src_index());
1582 arg_order.push(stores->at(i)->dst_index());
1583 }
1584 }
1586 // Collected all the move operations
1587 void add_edge(int src_index, VMRegPair src, int dst_index, VMRegPair dst) {
1588 if (src.first() == dst.first()) return;
1589 edges.append(new MoveOperation(src_index, src, dst_index, dst));
1590 }
1592 // Walk the edges breaking cycles between moves. The result list
1593 // can be walked in order to produce the proper set of loads
1594 GrowableArray<MoveOperation*>* get_store_order(VMRegPair temp_register) {
1595 // Record which moves kill which values
1596 GrowableArray<MoveOperation*> killer;
1597 for (int i = 0; i < edges.length(); i++) {
1598 MoveOperation* s = edges.at(i);
1599 assert(killer.at_grow(s->dst_id(), NULL) == NULL, "only one killer");
1600 killer.at_put_grow(s->dst_id(), s, NULL);
1601 }
1602 assert(killer.at_grow(MoveOperation::get_id(temp_register), NULL) == NULL,
1603 "make sure temp isn't in the registers that are killed");
1605 // create links between loads and stores
1606 for (int i = 0; i < edges.length(); i++) {
1607 edges.at(i)->link(killer);
1608 }
1610 // at this point, all the move operations are chained together
1611 // in a doubly linked list. Processing it backwards finds
1612 // the beginning of the chain, forwards finds the end. If there's
1613 // a cycle it can be broken at any point, so pick an edge and walk
1614 // backward until the list ends or we end where we started.
1615 GrowableArray<MoveOperation*>* stores = new GrowableArray<MoveOperation*>();
1616 for (int e = 0; e < edges.length(); e++) {
1617 MoveOperation* s = edges.at(e);
1618 if (!s->is_processed()) {
1619 MoveOperation* start = s;
1620 // search for the beginning of the chain or cycle
1621 while (start->prev() != NULL && start->prev() != s) {
1622 start = start->prev();
1623 }
1624 if (start->prev() == s) {
1625 start->break_cycle(temp_register);
1626 }
1627 // walk the chain forward inserting to store list
1628 while (start != NULL) {
1629 stores->append(start);
1630 start->set_processed();
1631 start = start->next();
1632 }
1633 }
1634 }
1635 return stores;
1636 }
1637 };
1639 static void verify_oop_args(MacroAssembler* masm,
1640 methodHandle method,
1641 const BasicType* sig_bt,
1642 const VMRegPair* regs) {
1643 Register temp_reg = rbx; // not part of any compiled calling seq
1644 if (VerifyOops) {
1645 for (int i = 0; i < method->size_of_parameters(); i++) {
1646 if (sig_bt[i] == T_OBJECT ||
1647 sig_bt[i] == T_ARRAY) {
1648 VMReg r = regs[i].first();
1649 assert(r->is_valid(), "bad oop arg");
1650 if (r->is_stack()) {
1651 __ movptr(temp_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1652 __ verify_oop(temp_reg);
1653 } else {
1654 __ verify_oop(r->as_Register());
1655 }
1656 }
1657 }
1658 }
1659 }
1661 static void gen_special_dispatch(MacroAssembler* masm,
1662 methodHandle method,
1663 const BasicType* sig_bt,
1664 const VMRegPair* regs) {
1665 verify_oop_args(masm, method, sig_bt, regs);
1666 vmIntrinsics::ID iid = method->intrinsic_id();
1668 // Now write the args into the outgoing interpreter space
1669 bool has_receiver = false;
1670 Register receiver_reg = noreg;
1671 int member_arg_pos = -1;
1672 Register member_reg = noreg;
1673 int ref_kind = MethodHandles::signature_polymorphic_intrinsic_ref_kind(iid);
1674 if (ref_kind != 0) {
1675 member_arg_pos = method->size_of_parameters() - 1; // trailing MemberName argument
1676 member_reg = rbx; // known to be free at this point
1677 has_receiver = MethodHandles::ref_kind_has_receiver(ref_kind);
1678 } else if (iid == vmIntrinsics::_invokeBasic) {
1679 has_receiver = true;
1680 } else {
1681 fatal(err_msg_res("unexpected intrinsic id %d", iid));
1682 }
1684 if (member_reg != noreg) {
1685 // Load the member_arg into register, if necessary.
1686 SharedRuntime::check_member_name_argument_is_last_argument(method, sig_bt, regs);
1687 VMReg r = regs[member_arg_pos].first();
1688 if (r->is_stack()) {
1689 __ movptr(member_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1690 } else {
1691 // no data motion is needed
1692 member_reg = r->as_Register();
1693 }
1694 }
1696 if (has_receiver) {
1697 // Make sure the receiver is loaded into a register.
1698 assert(method->size_of_parameters() > 0, "oob");
1699 assert(sig_bt[0] == T_OBJECT, "receiver argument must be an object");
1700 VMReg r = regs[0].first();
1701 assert(r->is_valid(), "bad receiver arg");
1702 if (r->is_stack()) {
1703 // Porting note: This assumes that compiled calling conventions always
1704 // pass the receiver oop in a register. If this is not true on some
1705 // platform, pick a temp and load the receiver from stack.
1706 fatal("receiver always in a register");
1707 receiver_reg = j_rarg0; // known to be free at this point
1708 __ movptr(receiver_reg, Address(rsp, r->reg2stack() * VMRegImpl::stack_slot_size + wordSize));
1709 } else {
1710 // no data motion is needed
1711 receiver_reg = r->as_Register();
1712 }
1713 }
1715 // Figure out which address we are really jumping to:
1716 MethodHandles::generate_method_handle_dispatch(masm, iid,
1717 receiver_reg, member_reg, /*for_compiler_entry:*/ true);
1718 }
1720 // ---------------------------------------------------------------------------
1721 // Generate a native wrapper for a given method. The method takes arguments
1722 // in the Java compiled code convention, marshals them to the native
1723 // convention (handlizes oops, etc), transitions to native, makes the call,
1724 // returns to java state (possibly blocking), unhandlizes any result and
1725 // returns.
1726 //
1727 // Critical native functions are a shorthand for the use of
1728 // GetPrimtiveArrayCritical and disallow the use of any other JNI
1729 // functions. The wrapper is expected to unpack the arguments before
1730 // passing them to the callee and perform checks before and after the
1731 // native call to ensure that they GC_locker
1732 // lock_critical/unlock_critical semantics are followed. Some other
1733 // parts of JNI setup are skipped like the tear down of the JNI handle
1734 // block and the check for pending exceptions it's impossible for them
1735 // to be thrown.
1736 //
1737 // They are roughly structured like this:
1738 // if (GC_locker::needs_gc())
1739 // SharedRuntime::block_for_jni_critical();
1740 // tranistion to thread_in_native
1741 // unpack arrray arguments and call native entry point
1742 // check for safepoint in progress
1743 // check if any thread suspend flags are set
1744 // call into JVM and possible unlock the JNI critical
1745 // if a GC was suppressed while in the critical native.
1746 // transition back to thread_in_Java
1747 // return to caller
1748 //
1749 nmethod* SharedRuntime::generate_native_wrapper(MacroAssembler* masm,
1750 methodHandle method,
1751 int compile_id,
1752 BasicType* in_sig_bt,
1753 VMRegPair* in_regs,
1754 BasicType ret_type) {
1755 if (method->is_method_handle_intrinsic()) {
1756 vmIntrinsics::ID iid = method->intrinsic_id();
1757 intptr_t start = (intptr_t)__ pc();
1758 int vep_offset = ((intptr_t)__ pc()) - start;
1759 gen_special_dispatch(masm,
1760 method,
1761 in_sig_bt,
1762 in_regs);
1763 int frame_complete = ((intptr_t)__ pc()) - start; // not complete, period
1764 __ flush();
1765 int stack_slots = SharedRuntime::out_preserve_stack_slots(); // no out slots at all, actually
1766 return nmethod::new_native_nmethod(method,
1767 compile_id,
1768 masm->code(),
1769 vep_offset,
1770 frame_complete,
1771 stack_slots / VMRegImpl::slots_per_word,
1772 in_ByteSize(-1),
1773 in_ByteSize(-1),
1774 (OopMapSet*)NULL);
1775 }
1776 bool is_critical_native = true;
1777 address native_func = method->critical_native_function();
1778 if (native_func == NULL) {
1779 native_func = method->native_function();
1780 is_critical_native = false;
1781 }
1782 assert(native_func != NULL, "must have function");
1784 // An OopMap for lock (and class if static)
1785 OopMapSet *oop_maps = new OopMapSet();
1786 intptr_t start = (intptr_t)__ pc();
1788 // We have received a description of where all the java arg are located
1789 // on entry to the wrapper. We need to convert these args to where
1790 // the jni function will expect them. To figure out where they go
1791 // we convert the java signature to a C signature by inserting
1792 // the hidden arguments as arg[0] and possibly arg[1] (static method)
1794 const int total_in_args = method->size_of_parameters();
1795 int total_c_args = total_in_args;
1796 if (!is_critical_native) {
1797 total_c_args += 1;
1798 if (method->is_static()) {
1799 total_c_args++;
1800 }
1801 } else {
1802 for (int i = 0; i < total_in_args; i++) {
1803 if (in_sig_bt[i] == T_ARRAY) {
1804 total_c_args++;
1805 }
1806 }
1807 }
1809 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args);
1810 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args);
1811 BasicType* in_elem_bt = NULL;
1813 int argc = 0;
1814 if (!is_critical_native) {
1815 out_sig_bt[argc++] = T_ADDRESS;
1816 if (method->is_static()) {
1817 out_sig_bt[argc++] = T_OBJECT;
1818 }
1820 for (int i = 0; i < total_in_args ; i++ ) {
1821 out_sig_bt[argc++] = in_sig_bt[i];
1822 }
1823 } else {
1824 Thread* THREAD = Thread::current();
1825 in_elem_bt = NEW_RESOURCE_ARRAY(BasicType, total_in_args);
1826 SignatureStream ss(method->signature());
1827 for (int i = 0; i < total_in_args ; i++ ) {
1828 if (in_sig_bt[i] == T_ARRAY) {
1829 // Arrays are passed as int, elem* pair
1830 out_sig_bt[argc++] = T_INT;
1831 out_sig_bt[argc++] = T_ADDRESS;
1832 Symbol* atype = ss.as_symbol(CHECK_NULL);
1833 const char* at = atype->as_C_string();
1834 if (strlen(at) == 2) {
1835 assert(at[0] == '[', "must be");
1836 switch (at[1]) {
1837 case 'B': in_elem_bt[i] = T_BYTE; break;
1838 case 'C': in_elem_bt[i] = T_CHAR; break;
1839 case 'D': in_elem_bt[i] = T_DOUBLE; break;
1840 case 'F': in_elem_bt[i] = T_FLOAT; break;
1841 case 'I': in_elem_bt[i] = T_INT; break;
1842 case 'J': in_elem_bt[i] = T_LONG; break;
1843 case 'S': in_elem_bt[i] = T_SHORT; break;
1844 case 'Z': in_elem_bt[i] = T_BOOLEAN; break;
1845 default: ShouldNotReachHere();
1846 }
1847 }
1848 } else {
1849 out_sig_bt[argc++] = in_sig_bt[i];
1850 in_elem_bt[i] = T_VOID;
1851 }
1852 if (in_sig_bt[i] != T_VOID) {
1853 assert(in_sig_bt[i] == ss.type(), "must match");
1854 ss.next();
1855 }
1856 }
1857 }
1859 // Now figure out where the args must be stored and how much stack space
1860 // they require.
1861 int out_arg_slots;
1862 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
1864 // Compute framesize for the wrapper. We need to handlize all oops in
1865 // incoming registers
1867 // Calculate the total number of stack slots we will need.
1869 // First count the abi requirement plus all of the outgoing args
1870 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
1872 // Now the space for the inbound oop handle area
1873 int total_save_slots = 6 * VMRegImpl::slots_per_word; // 6 arguments passed in registers
1874 if (is_critical_native) {
1875 // Critical natives may have to call out so they need a save area
1876 // for register arguments.
1877 int double_slots = 0;
1878 int single_slots = 0;
1879 for ( int i = 0; i < total_in_args; i++) {
1880 if (in_regs[i].first()->is_Register()) {
1881 const Register reg = in_regs[i].first()->as_Register();
1882 switch (in_sig_bt[i]) {
1883 case T_BOOLEAN:
1884 case T_BYTE:
1885 case T_SHORT:
1886 case T_CHAR:
1887 case T_INT: single_slots++; break;
1888 case T_ARRAY: // specific to LP64 (7145024)
1889 case T_LONG: double_slots++; break;
1890 default: ShouldNotReachHere();
1891 }
1892 } else if (in_regs[i].first()->is_XMMRegister()) {
1893 switch (in_sig_bt[i]) {
1894 case T_FLOAT: single_slots++; break;
1895 case T_DOUBLE: double_slots++; break;
1896 default: ShouldNotReachHere();
1897 }
1898 } else if (in_regs[i].first()->is_FloatRegister()) {
1899 ShouldNotReachHere();
1900 }
1901 }
1902 total_save_slots = double_slots * 2 + single_slots;
1903 // align the save area
1904 if (double_slots != 0) {
1905 stack_slots = round_to(stack_slots, 2);
1906 }
1907 }
1909 int oop_handle_offset = stack_slots;
1910 stack_slots += total_save_slots;
1912 // Now any space we need for handlizing a klass if static method
1914 int klass_slot_offset = 0;
1915 int klass_offset = -1;
1916 int lock_slot_offset = 0;
1917 bool is_static = false;
1919 if (method->is_static()) {
1920 klass_slot_offset = stack_slots;
1921 stack_slots += VMRegImpl::slots_per_word;
1922 klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size;
1923 is_static = true;
1924 }
1926 // Plus a lock if needed
1928 if (method->is_synchronized()) {
1929 lock_slot_offset = stack_slots;
1930 stack_slots += VMRegImpl::slots_per_word;
1931 }
1933 // Now a place (+2) to save return values or temp during shuffling
1934 // + 4 for return address (which we own) and saved rbp
1935 stack_slots += 6;
1937 // Ok The space we have allocated will look like:
1938 //
1939 //
1940 // FP-> | |
1941 // |---------------------|
1942 // | 2 slots for moves |
1943 // |---------------------|
1944 // | lock box (if sync) |
1945 // |---------------------| <- lock_slot_offset
1946 // | klass (if static) |
1947 // |---------------------| <- klass_slot_offset
1948 // | oopHandle area |
1949 // |---------------------| <- oop_handle_offset (6 java arg registers)
1950 // | outbound memory |
1951 // | based arguments |
1952 // | |
1953 // |---------------------|
1954 // | |
1955 // SP-> | out_preserved_slots |
1956 //
1957 //
1960 // Now compute actual number of stack words we need rounding to make
1961 // stack properly aligned.
1962 stack_slots = round_to(stack_slots, StackAlignmentInSlots);
1964 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
1966 // First thing make an ic check to see if we should even be here
1968 // We are free to use all registers as temps without saving them and
1969 // restoring them except rbp. rbp is the only callee save register
1970 // as far as the interpreter and the compiler(s) are concerned.
1973 const Register ic_reg = rax;
1974 const Register receiver = j_rarg0;
1976 Label hit;
1977 Label exception_pending;
1979 assert_different_registers(ic_reg, receiver, rscratch1);
1980 __ verify_oop(receiver);
1981 __ load_klass(rscratch1, receiver);
1982 __ cmpq(ic_reg, rscratch1);
1983 __ jcc(Assembler::equal, hit);
1985 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
1987 // Verified entry point must be aligned
1988 __ align(8);
1990 __ bind(hit);
1992 int vep_offset = ((intptr_t)__ pc()) - start;
1994 // The instruction at the verified entry point must be 5 bytes or longer
1995 // because it can be patched on the fly by make_non_entrant. The stack bang
1996 // instruction fits that requirement.
1998 // Generate stack overflow check
2000 if (UseStackBanging) {
2001 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
2002 } else {
2003 // need a 5 byte instruction to allow MT safe patching to non-entrant
2004 __ fat_nop();
2005 }
2007 // Generate a new frame for the wrapper.
2008 __ enter();
2009 // -2 because return address is already present and so is saved rbp
2010 __ subptr(rsp, stack_size - 2*wordSize);
2012 // Frame is now completed as far as size and linkage.
2013 int frame_complete = ((intptr_t)__ pc()) - start;
2015 if (UseRTMLocking) {
2016 // Abort RTM transaction before calling JNI
2017 // because critical section will be large and will be
2018 // aborted anyway. Also nmethod could be deoptimized.
2019 __ xabort(0);
2020 }
2022 #ifdef ASSERT
2023 {
2024 Label L;
2025 __ mov(rax, rsp);
2026 __ andptr(rax, -16); // must be 16 byte boundary (see amd64 ABI)
2027 __ cmpptr(rax, rsp);
2028 __ jcc(Assembler::equal, L);
2029 __ stop("improperly aligned stack");
2030 __ bind(L);
2031 }
2032 #endif /* ASSERT */
2035 // We use r14 as the oop handle for the receiver/klass
2036 // It is callee save so it survives the call to native
2038 const Register oop_handle_reg = r14;
2040 if (is_critical_native) {
2041 check_needs_gc_for_critical_native(masm, stack_slots, total_c_args, total_in_args,
2042 oop_handle_offset, oop_maps, in_regs, in_sig_bt);
2043 }
2045 //
2046 // We immediately shuffle the arguments so that any vm call we have to
2047 // make from here on out (sync slow path, jvmti, etc.) we will have
2048 // captured the oops from our caller and have a valid oopMap for
2049 // them.
2051 // -----------------
2052 // The Grand Shuffle
2054 // The Java calling convention is either equal (linux) or denser (win64) than the
2055 // c calling convention. However the because of the jni_env argument the c calling
2056 // convention always has at least one more (and two for static) arguments than Java.
2057 // Therefore if we move the args from java -> c backwards then we will never have
2058 // a register->register conflict and we don't have to build a dependency graph
2059 // and figure out how to break any cycles.
2060 //
2062 // Record esp-based slot for receiver on stack for non-static methods
2063 int receiver_offset = -1;
2065 // This is a trick. We double the stack slots so we can claim
2066 // the oops in the caller's frame. Since we are sure to have
2067 // more args than the caller doubling is enough to make
2068 // sure we can capture all the incoming oop args from the
2069 // caller.
2070 //
2071 OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/);
2073 // Mark location of rbp (someday)
2074 // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, vmreg(rbp));
2076 // Use eax, ebx as temporaries during any memory-memory moves we have to do
2077 // All inbound args are referenced based on rbp and all outbound args via rsp.
2080 #ifdef ASSERT
2081 bool reg_destroyed[RegisterImpl::number_of_registers];
2082 bool freg_destroyed[XMMRegisterImpl::number_of_registers];
2083 for ( int r = 0 ; r < RegisterImpl::number_of_registers ; r++ ) {
2084 reg_destroyed[r] = false;
2085 }
2086 for ( int f = 0 ; f < XMMRegisterImpl::number_of_registers ; f++ ) {
2087 freg_destroyed[f] = false;
2088 }
2090 #endif /* ASSERT */
2092 // This may iterate in two different directions depending on the
2093 // kind of native it is. The reason is that for regular JNI natives
2094 // the incoming and outgoing registers are offset upwards and for
2095 // critical natives they are offset down.
2096 GrowableArray<int> arg_order(2 * total_in_args);
2097 VMRegPair tmp_vmreg;
2098 tmp_vmreg.set1(rbx->as_VMReg());
2100 if (!is_critical_native) {
2101 for (int i = total_in_args - 1, c_arg = total_c_args - 1; i >= 0; i--, c_arg--) {
2102 arg_order.push(i);
2103 arg_order.push(c_arg);
2104 }
2105 } else {
2106 // Compute a valid move order, using tmp_vmreg to break any cycles
2107 ComputeMoveOrder cmo(total_in_args, in_regs, total_c_args, out_regs, in_sig_bt, arg_order, tmp_vmreg);
2108 }
2110 int temploc = -1;
2111 for (int ai = 0; ai < arg_order.length(); ai += 2) {
2112 int i = arg_order.at(ai);
2113 int c_arg = arg_order.at(ai + 1);
2114 __ block_comment(err_msg("move %d -> %d", i, c_arg));
2115 if (c_arg == -1) {
2116 assert(is_critical_native, "should only be required for critical natives");
2117 // This arg needs to be moved to a temporary
2118 __ mov(tmp_vmreg.first()->as_Register(), in_regs[i].first()->as_Register());
2119 in_regs[i] = tmp_vmreg;
2120 temploc = i;
2121 continue;
2122 } else if (i == -1) {
2123 assert(is_critical_native, "should only be required for critical natives");
2124 // Read from the temporary location
2125 assert(temploc != -1, "must be valid");
2126 i = temploc;
2127 temploc = -1;
2128 }
2129 #ifdef ASSERT
2130 if (in_regs[i].first()->is_Register()) {
2131 assert(!reg_destroyed[in_regs[i].first()->as_Register()->encoding()], "destroyed reg!");
2132 } else if (in_regs[i].first()->is_XMMRegister()) {
2133 assert(!freg_destroyed[in_regs[i].first()->as_XMMRegister()->encoding()], "destroyed reg!");
2134 }
2135 if (out_regs[c_arg].first()->is_Register()) {
2136 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
2137 } else if (out_regs[c_arg].first()->is_XMMRegister()) {
2138 freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;
2139 }
2140 #endif /* ASSERT */
2141 switch (in_sig_bt[i]) {
2142 case T_ARRAY:
2143 if (is_critical_native) {
2144 unpack_array_argument(masm, in_regs[i], in_elem_bt[i], out_regs[c_arg + 1], out_regs[c_arg]);
2145 c_arg++;
2146 #ifdef ASSERT
2147 if (out_regs[c_arg].first()->is_Register()) {
2148 reg_destroyed[out_regs[c_arg].first()->as_Register()->encoding()] = true;
2149 } else if (out_regs[c_arg].first()->is_XMMRegister()) {
2150 freg_destroyed[out_regs[c_arg].first()->as_XMMRegister()->encoding()] = true;
2151 }
2152 #endif
2153 break;
2154 }
2155 case T_OBJECT:
2156 assert(!is_critical_native, "no oop arguments");
2157 object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg],
2158 ((i == 0) && (!is_static)),
2159 &receiver_offset);
2160 break;
2161 case T_VOID:
2162 break;
2164 case T_FLOAT:
2165 float_move(masm, in_regs[i], out_regs[c_arg]);
2166 break;
2168 case T_DOUBLE:
2169 assert( i + 1 < total_in_args &&
2170 in_sig_bt[i + 1] == T_VOID &&
2171 out_sig_bt[c_arg+1] == T_VOID, "bad arg list");
2172 double_move(masm, in_regs[i], out_regs[c_arg]);
2173 break;
2175 case T_LONG :
2176 long_move(masm, in_regs[i], out_regs[c_arg]);
2177 break;
2179 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
2181 default:
2182 move32_64(masm, in_regs[i], out_regs[c_arg]);
2183 }
2184 }
2186 int c_arg;
2188 // Pre-load a static method's oop into r14. Used both by locking code and
2189 // the normal JNI call code.
2190 if (!is_critical_native) {
2191 // point c_arg at the first arg that is already loaded in case we
2192 // need to spill before we call out
2193 c_arg = total_c_args - total_in_args;
2195 if (method->is_static()) {
2197 // load oop into a register
2198 __ movoop(oop_handle_reg, JNIHandles::make_local(method->method_holder()->java_mirror()));
2200 // Now handlize the static class mirror it's known not-null.
2201 __ movptr(Address(rsp, klass_offset), oop_handle_reg);
2202 map->set_oop(VMRegImpl::stack2reg(klass_slot_offset));
2204 // Now get the handle
2205 __ lea(oop_handle_reg, Address(rsp, klass_offset));
2206 // store the klass handle as second argument
2207 __ movptr(c_rarg1, oop_handle_reg);
2208 // and protect the arg if we must spill
2209 c_arg--;
2210 }
2211 } else {
2212 // For JNI critical methods we need to save all registers in save_args.
2213 c_arg = 0;
2214 }
2216 // Change state to native (we save the return address in the thread, since it might not
2217 // be pushed on the stack when we do a a stack traversal). It is enough that the pc()
2218 // points into the right code segment. It does not have to be the correct return pc.
2219 // We use the same pc/oopMap repeatedly when we call out
2221 intptr_t the_pc = (intptr_t) __ pc();
2222 oop_maps->add_gc_map(the_pc - start, map);
2224 __ set_last_Java_frame(rsp, noreg, (address)the_pc);
2227 // We have all of the arguments setup at this point. We must not touch any register
2228 // argument registers at this point (what if we save/restore them there are no oop?
2230 {
2231 SkipIfEqual skip(masm, &DTraceMethodProbes, false);
2232 // protect the args we've loaded
2233 save_args(masm, total_c_args, c_arg, out_regs);
2234 __ mov_metadata(c_rarg1, method());
2235 __ call_VM_leaf(
2236 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry),
2237 r15_thread, c_rarg1);
2238 restore_args(masm, total_c_args, c_arg, out_regs);
2239 }
2241 // RedefineClasses() tracing support for obsolete method entry
2242 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) {
2243 // protect the args we've loaded
2244 save_args(masm, total_c_args, c_arg, out_regs);
2245 __ mov_metadata(c_rarg1, method());
2246 __ call_VM_leaf(
2247 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry),
2248 r15_thread, c_rarg1);
2249 restore_args(masm, total_c_args, c_arg, out_regs);
2250 }
2252 // Lock a synchronized method
2254 // Register definitions used by locking and unlocking
2256 const Register swap_reg = rax; // Must use rax for cmpxchg instruction
2257 const Register obj_reg = rbx; // Will contain the oop
2258 const Register lock_reg = r13; // Address of compiler lock object (BasicLock)
2259 const Register old_hdr = r13; // value of old header at unlock time
2261 Label slow_path_lock;
2262 Label lock_done;
2264 if (method->is_synchronized()) {
2265 assert(!is_critical_native, "unhandled");
2268 const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes();
2270 // Get the handle (the 2nd argument)
2271 __ mov(oop_handle_reg, c_rarg1);
2273 // Get address of the box
2275 __ lea(lock_reg, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
2277 // Load the oop from the handle
2278 __ movptr(obj_reg, Address(oop_handle_reg, 0));
2280 if (UseBiasedLocking) {
2281 __ biased_locking_enter(lock_reg, obj_reg, swap_reg, rscratch1, false, lock_done, &slow_path_lock);
2282 }
2284 // Load immediate 1 into swap_reg %rax
2285 __ movl(swap_reg, 1);
2287 // Load (object->mark() | 1) into swap_reg %rax
2288 __ orptr(swap_reg, Address(obj_reg, 0));
2290 // Save (object->mark() | 1) into BasicLock's displaced header
2291 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
2293 if (os::is_MP()) {
2294 __ lock();
2295 }
2297 // src -> dest iff dest == rax else rax <- dest
2298 __ cmpxchgptr(lock_reg, Address(obj_reg, 0));
2299 __ jcc(Assembler::equal, lock_done);
2301 // Hmm should this move to the slow path code area???
2303 // Test if the oopMark is an obvious stack pointer, i.e.,
2304 // 1) (mark & 3) == 0, and
2305 // 2) rsp <= mark < mark + os::pagesize()
2306 // These 3 tests can be done by evaluating the following
2307 // expression: ((mark - rsp) & (3 - os::vm_page_size())),
2308 // assuming both stack pointer and pagesize have their
2309 // least significant 2 bits clear.
2310 // NOTE: the oopMark is in swap_reg %rax as the result of cmpxchg
2312 __ subptr(swap_reg, rsp);
2313 __ andptr(swap_reg, 3 - os::vm_page_size());
2315 // Save the test result, for recursive case, the result is zero
2316 __ movptr(Address(lock_reg, mark_word_offset), swap_reg);
2317 __ jcc(Assembler::notEqual, slow_path_lock);
2319 // Slow path will re-enter here
2321 __ bind(lock_done);
2322 }
2325 // Finally just about ready to make the JNI call
2328 // get JNIEnv* which is first argument to native
2329 if (!is_critical_native) {
2330 __ lea(c_rarg0, Address(r15_thread, in_bytes(JavaThread::jni_environment_offset())));
2331 }
2333 // Now set thread in native
2334 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native);
2336 __ call(RuntimeAddress(native_func));
2338 // Verify or restore cpu control state after JNI call
2339 __ restore_cpu_control_state_after_jni();
2341 // Unpack native results.
2342 switch (ret_type) {
2343 case T_BOOLEAN: __ c2bool(rax); break;
2344 case T_CHAR : __ movzwl(rax, rax); break;
2345 case T_BYTE : __ sign_extend_byte (rax); break;
2346 case T_SHORT : __ sign_extend_short(rax); break;
2347 case T_INT : /* nothing to do */ break;
2348 case T_DOUBLE :
2349 case T_FLOAT :
2350 // Result is in xmm0 we'll save as needed
2351 break;
2352 case T_ARRAY: // Really a handle
2353 case T_OBJECT: // Really a handle
2354 break; // can't de-handlize until after safepoint check
2355 case T_VOID: break;
2356 case T_LONG: break;
2357 default : ShouldNotReachHere();
2358 }
2360 // Switch thread to "native transition" state before reading the synchronization state.
2361 // This additional state is necessary because reading and testing the synchronization
2362 // state is not atomic w.r.t. GC, as this scenario demonstrates:
2363 // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
2364 // VM thread changes sync state to synchronizing and suspends threads for GC.
2365 // Thread A is resumed to finish this native method, but doesn't block here since it
2366 // didn't see any synchronization is progress, and escapes.
2367 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_native_trans);
2369 if(os::is_MP()) {
2370 if (UseMembar) {
2371 // Force this write out before the read below
2372 __ membar(Assembler::Membar_mask_bits(
2373 Assembler::LoadLoad | Assembler::LoadStore |
2374 Assembler::StoreLoad | Assembler::StoreStore));
2375 } else {
2376 // Write serialization page so VM thread can do a pseudo remote membar.
2377 // We use the current thread pointer to calculate a thread specific
2378 // offset to write to within the page. This minimizes bus traffic
2379 // due to cache line collision.
2380 __ serialize_memory(r15_thread, rcx);
2381 }
2382 }
2384 Label after_transition;
2386 // check for safepoint operation in progress and/or pending suspend requests
2387 {
2388 Label Continue;
2390 __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()),
2391 SafepointSynchronize::_not_synchronized);
2393 Label L;
2394 __ jcc(Assembler::notEqual, L);
2395 __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0);
2396 __ jcc(Assembler::equal, Continue);
2397 __ bind(L);
2399 // Don't use call_VM as it will see a possible pending exception and forward it
2400 // and never return here preventing us from clearing _last_native_pc down below.
2401 // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are
2402 // preserved and correspond to the bcp/locals pointers. So we do a runtime call
2403 // by hand.
2404 //
2405 save_native_result(masm, ret_type, stack_slots);
2406 __ mov(c_rarg0, r15_thread);
2407 __ mov(r12, rsp); // remember sp
2408 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
2409 __ andptr(rsp, -16); // align stack as required by ABI
2410 if (!is_critical_native) {
2411 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)));
2412 } else {
2413 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans_and_transition)));
2414 }
2415 __ mov(rsp, r12); // restore sp
2416 __ reinit_heapbase();
2417 // Restore any method result value
2418 restore_native_result(masm, ret_type, stack_slots);
2420 if (is_critical_native) {
2421 // The call above performed the transition to thread_in_Java so
2422 // skip the transition logic below.
2423 __ jmpb(after_transition);
2424 }
2426 __ bind(Continue);
2427 }
2429 // change thread state
2430 __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java);
2431 __ bind(after_transition);
2433 Label reguard;
2434 Label reguard_done;
2435 __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled);
2436 __ jcc(Assembler::equal, reguard);
2437 __ bind(reguard_done);
2439 // native result if any is live
2441 // Unlock
2442 Label unlock_done;
2443 Label slow_path_unlock;
2444 if (method->is_synchronized()) {
2446 // Get locked oop from the handle we passed to jni
2447 __ movptr(obj_reg, Address(oop_handle_reg, 0));
2449 Label done;
2451 if (UseBiasedLocking) {
2452 __ biased_locking_exit(obj_reg, old_hdr, done);
2453 }
2455 // Simple recursive lock?
2457 __ cmpptr(Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size), (int32_t)NULL_WORD);
2458 __ jcc(Assembler::equal, done);
2460 // Must save rax if if it is live now because cmpxchg must use it
2461 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
2462 save_native_result(masm, ret_type, stack_slots);
2463 }
2466 // get address of the stack lock
2467 __ lea(rax, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
2468 // get old displaced header
2469 __ movptr(old_hdr, Address(rax, 0));
2471 // Atomic swap old header if oop still contains the stack lock
2472 if (os::is_MP()) {
2473 __ lock();
2474 }
2475 __ cmpxchgptr(old_hdr, Address(obj_reg, 0));
2476 __ jcc(Assembler::notEqual, slow_path_unlock);
2478 // slow path re-enters here
2479 __ bind(unlock_done);
2480 if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) {
2481 restore_native_result(masm, ret_type, stack_slots);
2482 }
2484 __ bind(done);
2486 }
2487 {
2488 SkipIfEqual skip(masm, &DTraceMethodProbes, false);
2489 save_native_result(masm, ret_type, stack_slots);
2490 __ mov_metadata(c_rarg1, method());
2491 __ call_VM_leaf(
2492 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit),
2493 r15_thread, c_rarg1);
2494 restore_native_result(masm, ret_type, stack_slots);
2495 }
2497 __ reset_last_Java_frame(false, true);
2499 // Unpack oop result
2500 if (ret_type == T_OBJECT || ret_type == T_ARRAY) {
2501 Label L;
2502 __ testptr(rax, rax);
2503 __ jcc(Assembler::zero, L);
2504 __ movptr(rax, Address(rax, 0));
2505 __ bind(L);
2506 __ verify_oop(rax);
2507 }
2509 if (!is_critical_native) {
2510 // reset handle block
2511 __ movptr(rcx, Address(r15_thread, JavaThread::active_handles_offset()));
2512 __ movl(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), (int32_t)NULL_WORD);
2513 }
2515 // pop our frame
2517 __ leave();
2519 if (!is_critical_native) {
2520 // Any exception pending?
2521 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
2522 __ jcc(Assembler::notEqual, exception_pending);
2523 }
2525 // Return
2527 __ ret(0);
2529 // Unexpected paths are out of line and go here
2531 if (!is_critical_native) {
2532 // forward the exception
2533 __ bind(exception_pending);
2535 // and forward the exception
2536 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
2537 }
2539 // Slow path locking & unlocking
2540 if (method->is_synchronized()) {
2542 // BEGIN Slow path lock
2543 __ bind(slow_path_lock);
2545 // has last_Java_frame setup. No exceptions so do vanilla call not call_VM
2546 // args are (oop obj, BasicLock* lock, JavaThread* thread)
2548 // protect the args we've loaded
2549 save_args(masm, total_c_args, c_arg, out_regs);
2551 __ mov(c_rarg0, obj_reg);
2552 __ mov(c_rarg1, lock_reg);
2553 __ mov(c_rarg2, r15_thread);
2555 // Not a leaf but we have last_Java_frame setup as we want
2556 __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C), 3);
2557 restore_args(masm, total_c_args, c_arg, out_regs);
2559 #ifdef ASSERT
2560 { Label L;
2561 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
2562 __ jcc(Assembler::equal, L);
2563 __ stop("no pending exception allowed on exit from monitorenter");
2564 __ bind(L);
2565 }
2566 #endif
2567 __ jmp(lock_done);
2569 // END Slow path lock
2571 // BEGIN Slow path unlock
2572 __ bind(slow_path_unlock);
2574 // If we haven't already saved the native result we must save it now as xmm registers
2575 // are still exposed.
2577 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
2578 save_native_result(masm, ret_type, stack_slots);
2579 }
2581 __ lea(c_rarg1, Address(rsp, lock_slot_offset * VMRegImpl::stack_slot_size));
2583 __ mov(c_rarg0, obj_reg);
2584 __ mov(r12, rsp); // remember sp
2585 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
2586 __ andptr(rsp, -16); // align stack as required by ABI
2588 // Save pending exception around call to VM (which contains an EXCEPTION_MARK)
2589 // NOTE that obj_reg == rbx currently
2590 __ movptr(rbx, Address(r15_thread, in_bytes(Thread::pending_exception_offset())));
2591 __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int32_t)NULL_WORD);
2593 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C)));
2594 __ mov(rsp, r12); // restore sp
2595 __ reinit_heapbase();
2596 #ifdef ASSERT
2597 {
2598 Label L;
2599 __ cmpptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD);
2600 __ jcc(Assembler::equal, L);
2601 __ stop("no pending exception allowed on exit complete_monitor_unlocking_C");
2602 __ bind(L);
2603 }
2604 #endif /* ASSERT */
2606 __ movptr(Address(r15_thread, in_bytes(Thread::pending_exception_offset())), rbx);
2608 if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) {
2609 restore_native_result(masm, ret_type, stack_slots);
2610 }
2611 __ jmp(unlock_done);
2613 // END Slow path unlock
2615 } // synchronized
2617 // SLOW PATH Reguard the stack if needed
2619 __ bind(reguard);
2620 save_native_result(masm, ret_type, stack_slots);
2621 __ mov(r12, rsp); // remember sp
2622 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows
2623 __ andptr(rsp, -16); // align stack as required by ABI
2624 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)));
2625 __ mov(rsp, r12); // restore sp
2626 __ reinit_heapbase();
2627 restore_native_result(masm, ret_type, stack_slots);
2628 // and continue
2629 __ jmp(reguard_done);
2633 __ flush();
2635 nmethod *nm = nmethod::new_native_nmethod(method,
2636 compile_id,
2637 masm->code(),
2638 vep_offset,
2639 frame_complete,
2640 stack_slots / VMRegImpl::slots_per_word,
2641 (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)),
2642 in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size),
2643 oop_maps);
2645 if (is_critical_native) {
2646 nm->set_lazy_critical_native(true);
2647 }
2649 return nm;
2651 }
2653 #ifdef HAVE_DTRACE_H
2654 // ---------------------------------------------------------------------------
2655 // Generate a dtrace nmethod for a given signature. The method takes arguments
2656 // in the Java compiled code convention, marshals them to the native
2657 // abi and then leaves nops at the position you would expect to call a native
2658 // function. When the probe is enabled the nops are replaced with a trap
2659 // instruction that dtrace inserts and the trace will cause a notification
2660 // to dtrace.
2661 //
2662 // The probes are only able to take primitive types and java/lang/String as
2663 // arguments. No other java types are allowed. Strings are converted to utf8
2664 // strings so that from dtrace point of view java strings are converted to C
2665 // strings. There is an arbitrary fixed limit on the total space that a method
2666 // can use for converting the strings. (256 chars per string in the signature).
2667 // So any java string larger then this is truncated.
2669 static int fp_offset[ConcreteRegisterImpl::number_of_registers] = { 0 };
2670 static bool offsets_initialized = false;
2673 nmethod *SharedRuntime::generate_dtrace_nmethod(MacroAssembler *masm,
2674 methodHandle method) {
2677 // generate_dtrace_nmethod is guarded by a mutex so we are sure to
2678 // be single threaded in this method.
2679 assert(AdapterHandlerLibrary_lock->owned_by_self(), "must be");
2681 if (!offsets_initialized) {
2682 fp_offset[c_rarg0->as_VMReg()->value()] = -1 * wordSize;
2683 fp_offset[c_rarg1->as_VMReg()->value()] = -2 * wordSize;
2684 fp_offset[c_rarg2->as_VMReg()->value()] = -3 * wordSize;
2685 fp_offset[c_rarg3->as_VMReg()->value()] = -4 * wordSize;
2686 fp_offset[c_rarg4->as_VMReg()->value()] = -5 * wordSize;
2687 fp_offset[c_rarg5->as_VMReg()->value()] = -6 * wordSize;
2689 fp_offset[c_farg0->as_VMReg()->value()] = -7 * wordSize;
2690 fp_offset[c_farg1->as_VMReg()->value()] = -8 * wordSize;
2691 fp_offset[c_farg2->as_VMReg()->value()] = -9 * wordSize;
2692 fp_offset[c_farg3->as_VMReg()->value()] = -10 * wordSize;
2693 fp_offset[c_farg4->as_VMReg()->value()] = -11 * wordSize;
2694 fp_offset[c_farg5->as_VMReg()->value()] = -12 * wordSize;
2695 fp_offset[c_farg6->as_VMReg()->value()] = -13 * wordSize;
2696 fp_offset[c_farg7->as_VMReg()->value()] = -14 * wordSize;
2698 offsets_initialized = true;
2699 }
2700 // Fill in the signature array, for the calling-convention call.
2701 int total_args_passed = method->size_of_parameters();
2703 BasicType* in_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed);
2704 VMRegPair *in_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed);
2706 // The signature we are going to use for the trap that dtrace will see
2707 // java/lang/String is converted. We drop "this" and any other object
2708 // is converted to NULL. (A one-slot java/lang/Long object reference
2709 // is converted to a two-slot long, which is why we double the allocation).
2710 BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_args_passed * 2);
2711 VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_args_passed * 2);
2713 int i=0;
2714 int total_strings = 0;
2715 int first_arg_to_pass = 0;
2716 int total_c_args = 0;
2718 // Skip the receiver as dtrace doesn't want to see it
2719 if( !method->is_static() ) {
2720 in_sig_bt[i++] = T_OBJECT;
2721 first_arg_to_pass = 1;
2722 }
2724 // We need to convert the java args to where a native (non-jni) function
2725 // would expect them. To figure out where they go we convert the java
2726 // signature to a C signature.
2728 SignatureStream ss(method->signature());
2729 for ( ; !ss.at_return_type(); ss.next()) {
2730 BasicType bt = ss.type();
2731 in_sig_bt[i++] = bt; // Collect remaining bits of signature
2732 out_sig_bt[total_c_args++] = bt;
2733 if( bt == T_OBJECT) {
2734 Symbol* s = ss.as_symbol_or_null(); // symbol is created
2735 if (s == vmSymbols::java_lang_String()) {
2736 total_strings++;
2737 out_sig_bt[total_c_args-1] = T_ADDRESS;
2738 } else if (s == vmSymbols::java_lang_Boolean() ||
2739 s == vmSymbols::java_lang_Character() ||
2740 s == vmSymbols::java_lang_Byte() ||
2741 s == vmSymbols::java_lang_Short() ||
2742 s == vmSymbols::java_lang_Integer() ||
2743 s == vmSymbols::java_lang_Float()) {
2744 out_sig_bt[total_c_args-1] = T_INT;
2745 } else if (s == vmSymbols::java_lang_Long() ||
2746 s == vmSymbols::java_lang_Double()) {
2747 out_sig_bt[total_c_args-1] = T_LONG;
2748 out_sig_bt[total_c_args++] = T_VOID;
2749 }
2750 } else if ( bt == T_LONG || bt == T_DOUBLE ) {
2751 in_sig_bt[i++] = T_VOID; // Longs & doubles take 2 Java slots
2752 // We convert double to long
2753 out_sig_bt[total_c_args-1] = T_LONG;
2754 out_sig_bt[total_c_args++] = T_VOID;
2755 } else if ( bt == T_FLOAT) {
2756 // We convert float to int
2757 out_sig_bt[total_c_args-1] = T_INT;
2758 }
2759 }
2761 assert(i==total_args_passed, "validly parsed signature");
2763 // Now get the compiled-Java layout as input arguments
2764 int comp_args_on_stack;
2765 comp_args_on_stack = SharedRuntime::java_calling_convention(
2766 in_sig_bt, in_regs, total_args_passed, false);
2768 // Now figure out where the args must be stored and how much stack space
2769 // they require (neglecting out_preserve_stack_slots but space for storing
2770 // the 1st six register arguments). It's weird see int_stk_helper.
2772 int out_arg_slots;
2773 out_arg_slots = c_calling_convention(out_sig_bt, out_regs, NULL, total_c_args);
2775 // Calculate the total number of stack slots we will need.
2777 // First count the abi requirement plus all of the outgoing args
2778 int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots;
2780 // Now space for the string(s) we must convert
2781 int* string_locs = NEW_RESOURCE_ARRAY(int, total_strings + 1);
2782 for (i = 0; i < total_strings ; i++) {
2783 string_locs[i] = stack_slots;
2784 stack_slots += max_dtrace_string_size / VMRegImpl::stack_slot_size;
2785 }
2787 // Plus the temps we might need to juggle register args
2788 // regs take two slots each
2789 stack_slots += (Argument::n_int_register_parameters_c +
2790 Argument::n_float_register_parameters_c) * 2;
2793 // + 4 for return address (which we own) and saved rbp,
2795 stack_slots += 4;
2797 // Ok The space we have allocated will look like:
2798 //
2799 //
2800 // FP-> | |
2801 // |---------------------|
2802 // | string[n] |
2803 // |---------------------| <- string_locs[n]
2804 // | string[n-1] |
2805 // |---------------------| <- string_locs[n-1]
2806 // | ... |
2807 // | ... |
2808 // |---------------------| <- string_locs[1]
2809 // | string[0] |
2810 // |---------------------| <- string_locs[0]
2811 // | outbound memory |
2812 // | based arguments |
2813 // | |
2814 // |---------------------|
2815 // | |
2816 // SP-> | out_preserved_slots |
2817 //
2818 //
2820 // Now compute actual number of stack words we need rounding to make
2821 // stack properly aligned.
2822 stack_slots = round_to(stack_slots, 4 * VMRegImpl::slots_per_word);
2824 int stack_size = stack_slots * VMRegImpl::stack_slot_size;
2826 intptr_t start = (intptr_t)__ pc();
2828 // First thing make an ic check to see if we should even be here
2830 // We are free to use all registers as temps without saving them and
2831 // restoring them except rbp. rbp, is the only callee save register
2832 // as far as the interpreter and the compiler(s) are concerned.
2834 const Register ic_reg = rax;
2835 const Register receiver = rcx;
2836 Label hit;
2837 Label exception_pending;
2840 __ verify_oop(receiver);
2841 __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes()));
2842 __ jcc(Assembler::equal, hit);
2844 __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub()));
2846 // verified entry must be aligned for code patching.
2847 // and the first 5 bytes must be in the same cache line
2848 // if we align at 8 then we will be sure 5 bytes are in the same line
2849 __ align(8);
2851 __ bind(hit);
2853 int vep_offset = ((intptr_t)__ pc()) - start;
2856 // The instruction at the verified entry point must be 5 bytes or longer
2857 // because it can be patched on the fly by make_non_entrant. The stack bang
2858 // instruction fits that requirement.
2860 // Generate stack overflow check
2862 if (UseStackBanging) {
2863 if (stack_size <= StackShadowPages*os::vm_page_size()) {
2864 __ bang_stack_with_offset(StackShadowPages*os::vm_page_size());
2865 } else {
2866 __ movl(rax, stack_size);
2867 __ bang_stack_size(rax, rbx);
2868 }
2869 } else {
2870 // need a 5 byte instruction to allow MT safe patching to non-entrant
2871 __ fat_nop();
2872 }
2874 assert(((uintptr_t)__ pc() - start - vep_offset) >= 5,
2875 "valid size for make_non_entrant");
2877 // Generate a new frame for the wrapper.
2878 __ enter();
2880 // -4 because return address is already present and so is saved rbp,
2881 if (stack_size - 2*wordSize != 0) {
2882 __ subq(rsp, stack_size - 2*wordSize);
2883 }
2885 // Frame is now completed as far a size and linkage.
2887 int frame_complete = ((intptr_t)__ pc()) - start;
2889 int c_arg, j_arg;
2891 // State of input register args
2893 bool live[ConcreteRegisterImpl::number_of_registers];
2895 live[j_rarg0->as_VMReg()->value()] = false;
2896 live[j_rarg1->as_VMReg()->value()] = false;
2897 live[j_rarg2->as_VMReg()->value()] = false;
2898 live[j_rarg3->as_VMReg()->value()] = false;
2899 live[j_rarg4->as_VMReg()->value()] = false;
2900 live[j_rarg5->as_VMReg()->value()] = false;
2902 live[j_farg0->as_VMReg()->value()] = false;
2903 live[j_farg1->as_VMReg()->value()] = false;
2904 live[j_farg2->as_VMReg()->value()] = false;
2905 live[j_farg3->as_VMReg()->value()] = false;
2906 live[j_farg4->as_VMReg()->value()] = false;
2907 live[j_farg5->as_VMReg()->value()] = false;
2908 live[j_farg6->as_VMReg()->value()] = false;
2909 live[j_farg7->as_VMReg()->value()] = false;
2912 bool rax_is_zero = false;
2914 // All args (except strings) destined for the stack are moved first
2915 for (j_arg = first_arg_to_pass, c_arg = 0 ;
2916 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
2917 VMRegPair src = in_regs[j_arg];
2918 VMRegPair dst = out_regs[c_arg];
2920 // Get the real reg value or a dummy (rsp)
2922 int src_reg = src.first()->is_reg() ?
2923 src.first()->value() :
2924 rsp->as_VMReg()->value();
2926 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
2927 (in_sig_bt[j_arg] == T_OBJECT &&
2928 out_sig_bt[c_arg] != T_INT &&
2929 out_sig_bt[c_arg] != T_ADDRESS &&
2930 out_sig_bt[c_arg] != T_LONG);
2932 live[src_reg] = !useless;
2934 if (dst.first()->is_stack()) {
2936 // Even though a string arg in a register is still live after this loop
2937 // after the string conversion loop (next) it will be dead so we take
2938 // advantage of that now for simpler code to manage live.
2940 live[src_reg] = false;
2941 switch (in_sig_bt[j_arg]) {
2943 case T_ARRAY:
2944 case T_OBJECT:
2945 {
2946 Address stack_dst(rsp, reg2offset_out(dst.first()));
2948 if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
2949 // need to unbox a one-word value
2950 Register in_reg = rax;
2951 if ( src.first()->is_reg() ) {
2952 in_reg = src.first()->as_Register();
2953 } else {
2954 __ movq(rax, Address(rbp, reg2offset_in(src.first())));
2955 rax_is_zero = false;
2956 }
2957 Label skipUnbox;
2958 __ movptr(Address(rsp, reg2offset_out(dst.first())),
2959 (int32_t)NULL_WORD);
2960 __ testq(in_reg, in_reg);
2961 __ jcc(Assembler::zero, skipUnbox);
2963 BasicType bt = out_sig_bt[c_arg];
2964 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
2965 Address src1(in_reg, box_offset);
2966 if ( bt == T_LONG ) {
2967 __ movq(in_reg, src1);
2968 __ movq(stack_dst, in_reg);
2969 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
2970 ++c_arg; // skip over T_VOID to keep the loop indices in sync
2971 } else {
2972 __ movl(in_reg, src1);
2973 __ movl(stack_dst, in_reg);
2974 }
2976 __ bind(skipUnbox);
2977 } else if (out_sig_bt[c_arg] != T_ADDRESS) {
2978 // Convert the arg to NULL
2979 if (!rax_is_zero) {
2980 __ xorq(rax, rax);
2981 rax_is_zero = true;
2982 }
2983 __ movq(stack_dst, rax);
2984 }
2985 }
2986 break;
2988 case T_VOID:
2989 break;
2991 case T_FLOAT:
2992 // This does the right thing since we know it is destined for the
2993 // stack
2994 float_move(masm, src, dst);
2995 break;
2997 case T_DOUBLE:
2998 // This does the right thing since we know it is destined for the
2999 // stack
3000 double_move(masm, src, dst);
3001 break;
3003 case T_LONG :
3004 long_move(masm, src, dst);
3005 break;
3007 case T_ADDRESS: assert(false, "found T_ADDRESS in java args");
3009 default:
3010 move32_64(masm, src, dst);
3011 }
3012 }
3014 }
3016 // If we have any strings we must store any register based arg to the stack
3017 // This includes any still live xmm registers too.
3019 int sid = 0;
3021 if (total_strings > 0 ) {
3022 for (j_arg = first_arg_to_pass, c_arg = 0 ;
3023 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
3024 VMRegPair src = in_regs[j_arg];
3025 VMRegPair dst = out_regs[c_arg];
3027 if (src.first()->is_reg()) {
3028 Address src_tmp(rbp, fp_offset[src.first()->value()]);
3030 // string oops were left untouched by the previous loop even if the
3031 // eventual (converted) arg is destined for the stack so park them
3032 // away now (except for first)
3034 if (out_sig_bt[c_arg] == T_ADDRESS) {
3035 Address utf8_addr = Address(
3036 rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
3037 if (sid != 1) {
3038 // The first string arg won't be killed until after the utf8
3039 // conversion
3040 __ movq(utf8_addr, src.first()->as_Register());
3041 }
3042 } else if (dst.first()->is_reg()) {
3043 if (in_sig_bt[j_arg] == T_FLOAT || in_sig_bt[j_arg] == T_DOUBLE) {
3045 // Convert the xmm register to an int and store it in the reserved
3046 // location for the eventual c register arg
3047 XMMRegister f = src.first()->as_XMMRegister();
3048 if (in_sig_bt[j_arg] == T_FLOAT) {
3049 __ movflt(src_tmp, f);
3050 } else {
3051 __ movdbl(src_tmp, f);
3052 }
3053 } else {
3054 // If the arg is an oop type we don't support don't bother to store
3055 // it remember string was handled above.
3056 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
3057 (in_sig_bt[j_arg] == T_OBJECT &&
3058 out_sig_bt[c_arg] != T_INT &&
3059 out_sig_bt[c_arg] != T_LONG);
3061 if (!useless) {
3062 __ movq(src_tmp, src.first()->as_Register());
3063 }
3064 }
3065 }
3066 }
3067 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
3068 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
3069 ++c_arg; // skip over T_VOID to keep the loop indices in sync
3070 }
3071 }
3073 // Now that the volatile registers are safe, convert all the strings
3074 sid = 0;
3076 for (j_arg = first_arg_to_pass, c_arg = 0 ;
3077 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
3078 if (out_sig_bt[c_arg] == T_ADDRESS) {
3079 // It's a string
3080 Address utf8_addr = Address(
3081 rsp, string_locs[sid++] * VMRegImpl::stack_slot_size);
3082 // The first string we find might still be in the original java arg
3083 // register
3085 VMReg src = in_regs[j_arg].first();
3087 // We will need to eventually save the final argument to the trap
3088 // in the von-volatile location dedicated to src. This is the offset
3089 // from fp we will use.
3090 int src_off = src->is_reg() ?
3091 fp_offset[src->value()] : reg2offset_in(src);
3093 // This is where the argument will eventually reside
3094 VMRegPair dst = out_regs[c_arg];
3096 if (src->is_reg()) {
3097 if (sid == 1) {
3098 __ movq(c_rarg0, src->as_Register());
3099 } else {
3100 __ movq(c_rarg0, utf8_addr);
3101 }
3102 } else {
3103 // arg is still in the original location
3104 __ movq(c_rarg0, Address(rbp, reg2offset_in(src)));
3105 }
3106 Label done, convert;
3108 // see if the oop is NULL
3109 __ testq(c_rarg0, c_rarg0);
3110 __ jcc(Assembler::notEqual, convert);
3112 if (dst.first()->is_reg()) {
3113 // Save the ptr to utf string in the origina src loc or the tmp
3114 // dedicated to it
3115 __ movq(Address(rbp, src_off), c_rarg0);
3116 } else {
3117 __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg0);
3118 }
3119 __ jmp(done);
3121 __ bind(convert);
3123 __ lea(c_rarg1, utf8_addr);
3124 if (dst.first()->is_reg()) {
3125 __ movq(Address(rbp, src_off), c_rarg1);
3126 } else {
3127 __ movq(Address(rsp, reg2offset_out(dst.first())), c_rarg1);
3128 }
3129 // And do the conversion
3130 __ call(RuntimeAddress(
3131 CAST_FROM_FN_PTR(address, SharedRuntime::get_utf)));
3133 __ bind(done);
3134 }
3135 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
3136 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
3137 ++c_arg; // skip over T_VOID to keep the loop indices in sync
3138 }
3139 }
3140 // The get_utf call killed all the c_arg registers
3141 live[c_rarg0->as_VMReg()->value()] = false;
3142 live[c_rarg1->as_VMReg()->value()] = false;
3143 live[c_rarg2->as_VMReg()->value()] = false;
3144 live[c_rarg3->as_VMReg()->value()] = false;
3145 live[c_rarg4->as_VMReg()->value()] = false;
3146 live[c_rarg5->as_VMReg()->value()] = false;
3148 live[c_farg0->as_VMReg()->value()] = false;
3149 live[c_farg1->as_VMReg()->value()] = false;
3150 live[c_farg2->as_VMReg()->value()] = false;
3151 live[c_farg3->as_VMReg()->value()] = false;
3152 live[c_farg4->as_VMReg()->value()] = false;
3153 live[c_farg5->as_VMReg()->value()] = false;
3154 live[c_farg6->as_VMReg()->value()] = false;
3155 live[c_farg7->as_VMReg()->value()] = false;
3156 }
3158 // Now we can finally move the register args to their desired locations
3160 rax_is_zero = false;
3162 for (j_arg = first_arg_to_pass, c_arg = 0 ;
3163 j_arg < total_args_passed ; j_arg++, c_arg++ ) {
3165 VMRegPair src = in_regs[j_arg];
3166 VMRegPair dst = out_regs[c_arg];
3168 // Only need to look for args destined for the interger registers (since we
3169 // convert float/double args to look like int/long outbound)
3170 if (dst.first()->is_reg()) {
3171 Register r = dst.first()->as_Register();
3173 // Check if the java arg is unsupported and thereofre useless
3174 bool useless = in_sig_bt[j_arg] == T_ARRAY ||
3175 (in_sig_bt[j_arg] == T_OBJECT &&
3176 out_sig_bt[c_arg] != T_INT &&
3177 out_sig_bt[c_arg] != T_ADDRESS &&
3178 out_sig_bt[c_arg] != T_LONG);
3181 // If we're going to kill an existing arg save it first
3182 if (live[dst.first()->value()]) {
3183 // you can't kill yourself
3184 if (src.first() != dst.first()) {
3185 __ movq(Address(rbp, fp_offset[dst.first()->value()]), r);
3186 }
3187 }
3188 if (src.first()->is_reg()) {
3189 if (live[src.first()->value()] ) {
3190 if (in_sig_bt[j_arg] == T_FLOAT) {
3191 __ movdl(r, src.first()->as_XMMRegister());
3192 } else if (in_sig_bt[j_arg] == T_DOUBLE) {
3193 __ movdq(r, src.first()->as_XMMRegister());
3194 } else if (r != src.first()->as_Register()) {
3195 if (!useless) {
3196 __ movq(r, src.first()->as_Register());
3197 }
3198 }
3199 } else {
3200 // If the arg is an oop type we don't support don't bother to store
3201 // it
3202 if (!useless) {
3203 if (in_sig_bt[j_arg] == T_DOUBLE ||
3204 in_sig_bt[j_arg] == T_LONG ||
3205 in_sig_bt[j_arg] == T_OBJECT ) {
3206 __ movq(r, Address(rbp, fp_offset[src.first()->value()]));
3207 } else {
3208 __ movl(r, Address(rbp, fp_offset[src.first()->value()]));
3209 }
3210 }
3211 }
3212 live[src.first()->value()] = false;
3213 } else if (!useless) {
3214 // full sized move even for int should be ok
3215 __ movq(r, Address(rbp, reg2offset_in(src.first())));
3216 }
3218 // At this point r has the original java arg in the final location
3219 // (assuming it wasn't useless). If the java arg was an oop
3220 // we have a bit more to do
3222 if (in_sig_bt[j_arg] == T_ARRAY || in_sig_bt[j_arg] == T_OBJECT ) {
3223 if (out_sig_bt[c_arg] == T_INT || out_sig_bt[c_arg] == T_LONG) {
3224 // need to unbox a one-word value
3225 Label skip;
3226 __ testq(r, r);
3227 __ jcc(Assembler::equal, skip);
3228 BasicType bt = out_sig_bt[c_arg];
3229 int box_offset = java_lang_boxing_object::value_offset_in_bytes(bt);
3230 Address src1(r, box_offset);
3231 if ( bt == T_LONG ) {
3232 __ movq(r, src1);
3233 } else {
3234 __ movl(r, src1);
3235 }
3236 __ bind(skip);
3238 } else if (out_sig_bt[c_arg] != T_ADDRESS) {
3239 // Convert the arg to NULL
3240 __ xorq(r, r);
3241 }
3242 }
3244 // dst can longer be holding an input value
3245 live[dst.first()->value()] = false;
3246 }
3247 if (in_sig_bt[j_arg] == T_OBJECT && out_sig_bt[c_arg] == T_LONG) {
3248 assert(out_sig_bt[c_arg+1] == T_VOID, "must be");
3249 ++c_arg; // skip over T_VOID to keep the loop indices in sync
3250 }
3251 }
3254 // Ok now we are done. Need to place the nop that dtrace wants in order to
3255 // patch in the trap
3256 int patch_offset = ((intptr_t)__ pc()) - start;
3258 __ nop();
3261 // Return
3263 __ leave();
3264 __ ret(0);
3266 __ flush();
3268 nmethod *nm = nmethod::new_dtrace_nmethod(
3269 method, masm->code(), vep_offset, patch_offset, frame_complete,
3270 stack_slots / VMRegImpl::slots_per_word);
3271 return nm;
3273 }
3275 #endif // HAVE_DTRACE_H
3277 // this function returns the adjust size (in number of words) to a c2i adapter
3278 // activation for use during deoptimization
3279 int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) {
3280 return (callee_locals - callee_parameters) * Interpreter::stackElementWords;
3281 }
3284 uint SharedRuntime::out_preserve_stack_slots() {
3285 return 0;
3286 }
3288 //------------------------------generate_deopt_blob----------------------------
3289 void SharedRuntime::generate_deopt_blob() {
3290 // Allocate space for the code
3291 ResourceMark rm;
3292 // Setup code generation tools
3293 CodeBuffer buffer("deopt_blob", 2048, 1024);
3294 MacroAssembler* masm = new MacroAssembler(&buffer);
3295 int frame_size_in_words;
3296 OopMap* map = NULL;
3297 OopMapSet *oop_maps = new OopMapSet();
3299 // -------------
3300 // This code enters when returning to a de-optimized nmethod. A return
3301 // address has been pushed on the the stack, and return values are in
3302 // registers.
3303 // If we are doing a normal deopt then we were called from the patched
3304 // nmethod from the point we returned to the nmethod. So the return
3305 // address on the stack is wrong by NativeCall::instruction_size
3306 // We will adjust the value so it looks like we have the original return
3307 // address on the stack (like when we eagerly deoptimized).
3308 // In the case of an exception pending when deoptimizing, we enter
3309 // with a return address on the stack that points after the call we patched
3310 // into the exception handler. We have the following register state from,
3311 // e.g., the forward exception stub (see stubGenerator_x86_64.cpp).
3312 // rax: exception oop
3313 // rbx: exception handler
3314 // rdx: throwing pc
3315 // So in this case we simply jam rdx into the useless return address and
3316 // the stack looks just like we want.
3317 //
3318 // At this point we need to de-opt. We save the argument return
3319 // registers. We call the first C routine, fetch_unroll_info(). This
3320 // routine captures the return values and returns a structure which
3321 // describes the current frame size and the sizes of all replacement frames.
3322 // The current frame is compiled code and may contain many inlined
3323 // functions, each with their own JVM state. We pop the current frame, then
3324 // push all the new frames. Then we call the C routine unpack_frames() to
3325 // populate these frames. Finally unpack_frames() returns us the new target
3326 // address. Notice that callee-save registers are BLOWN here; they have
3327 // already been captured in the vframeArray at the time the return PC was
3328 // patched.
3329 address start = __ pc();
3330 Label cont;
3332 // Prolog for non exception case!
3334 // Save everything in sight.
3335 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3337 // Normal deoptimization. Save exec mode for unpack_frames.
3338 __ movl(r14, Deoptimization::Unpack_deopt); // callee-saved
3339 __ jmp(cont);
3341 int reexecute_offset = __ pc() - start;
3343 // Reexecute case
3344 // return address is the pc describes what bci to do re-execute at
3346 // No need to update map as each call to save_live_registers will produce identical oopmap
3347 (void) RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3349 __ movl(r14, Deoptimization::Unpack_reexecute); // callee-saved
3350 __ jmp(cont);
3352 int exception_offset = __ pc() - start;
3354 // Prolog for exception case
3356 // all registers are dead at this entry point, except for rax, and
3357 // rdx which contain the exception oop and exception pc
3358 // respectively. Set them in TLS and fall thru to the
3359 // unpack_with_exception_in_tls entry point.
3361 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
3362 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), rax);
3364 int exception_in_tls_offset = __ pc() - start;
3366 // new implementation because exception oop is now passed in JavaThread
3368 // Prolog for exception case
3369 // All registers must be preserved because they might be used by LinearScan
3370 // Exceptiop oop and throwing PC are passed in JavaThread
3371 // tos: stack at point of call to method that threw the exception (i.e. only
3372 // args are on the stack, no return address)
3374 // make room on stack for the return address
3375 // It will be patched later with the throwing pc. The correct value is not
3376 // available now because loading it from memory would destroy registers.
3377 __ push(0);
3379 // Save everything in sight.
3380 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3382 // Now it is safe to overwrite any register
3384 // Deopt during an exception. Save exec mode for unpack_frames.
3385 __ movl(r14, Deoptimization::Unpack_exception); // callee-saved
3387 // load throwing pc from JavaThread and patch it as the return address
3388 // of the current frame. Then clear the field in JavaThread
3390 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
3391 __ movptr(Address(rbp, wordSize), rdx);
3392 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
3394 #ifdef ASSERT
3395 // verify that there is really an exception oop in JavaThread
3396 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
3397 __ verify_oop(rax);
3399 // verify that there is no pending exception
3400 Label no_pending_exception;
3401 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
3402 __ testptr(rax, rax);
3403 __ jcc(Assembler::zero, no_pending_exception);
3404 __ stop("must not have pending exception here");
3405 __ bind(no_pending_exception);
3406 #endif
3408 __ bind(cont);
3410 // Call C code. Need thread and this frame, but NOT official VM entry
3411 // crud. We cannot block on this call, no GC can happen.
3412 //
3413 // UnrollBlock* fetch_unroll_info(JavaThread* thread)
3415 // fetch_unroll_info needs to call last_java_frame().
3417 __ set_last_Java_frame(noreg, noreg, NULL);
3418 #ifdef ASSERT
3419 { Label L;
3420 __ cmpptr(Address(r15_thread,
3421 JavaThread::last_Java_fp_offset()),
3422 (int32_t)0);
3423 __ jcc(Assembler::equal, L);
3424 __ stop("SharedRuntime::generate_deopt_blob: last_Java_fp not cleared");
3425 __ bind(L);
3426 }
3427 #endif // ASSERT
3428 __ mov(c_rarg0, r15_thread);
3429 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info)));
3431 // Need to have an oopmap that tells fetch_unroll_info where to
3432 // find any register it might need.
3433 oop_maps->add_gc_map(__ pc() - start, map);
3435 __ reset_last_Java_frame(false, false);
3437 // Load UnrollBlock* into rdi
3438 __ mov(rdi, rax);
3440 Label noException;
3441 __ cmpl(r14, Deoptimization::Unpack_exception); // Was exception pending?
3442 __ jcc(Assembler::notEqual, noException);
3443 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
3444 // QQQ this is useless it was NULL above
3445 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
3446 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int32_t)NULL_WORD);
3447 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD);
3449 __ verify_oop(rax);
3451 // Overwrite the result registers with the exception results.
3452 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
3453 // I think this is useless
3454 __ movptr(Address(rsp, RegisterSaver::rdx_offset_in_bytes()), rdx);
3456 __ bind(noException);
3458 // Only register save data is on the stack.
3459 // Now restore the result registers. Everything else is either dead
3460 // or captured in the vframeArray.
3461 RegisterSaver::restore_result_registers(masm);
3463 // All of the register save area has been popped of the stack. Only the
3464 // return address remains.
3466 // Pop all the frames we must move/replace.
3467 //
3468 // Frame picture (youngest to oldest)
3469 // 1: self-frame (no frame link)
3470 // 2: deopting frame (no frame link)
3471 // 3: caller of deopting frame (could be compiled/interpreted).
3472 //
3473 // Note: by leaving the return address of self-frame on the stack
3474 // and using the size of frame 2 to adjust the stack
3475 // when we are done the return to frame 3 will still be on the stack.
3477 // Pop deoptimized frame
3478 __ movl(rcx, Address(rdi, Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes()));
3479 __ addptr(rsp, rcx);
3481 // rsp should be pointing at the return address to the caller (3)
3483 // Pick up the initial fp we should save
3484 // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
3485 __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
3487 #ifdef ASSERT
3488 // Compilers generate code that bang the stack by as much as the
3489 // interpreter would need. So this stack banging should never
3490 // trigger a fault. Verify that it does not on non product builds.
3491 if (UseStackBanging) {
3492 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
3493 __ bang_stack_size(rbx, rcx);
3494 }
3495 #endif
3497 // Load address of array of frame pcs into rcx
3498 __ movptr(rcx, Address(rdi, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
3500 // Trash the old pc
3501 __ addptr(rsp, wordSize);
3503 // Load address of array of frame sizes into rsi
3504 __ movptr(rsi, Address(rdi, Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes()));
3506 // Load counter into rdx
3507 __ movl(rdx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes()));
3509 // Now adjust the caller's stack to make up for the extra locals
3510 // but record the original sp so that we can save it in the skeletal interpreter
3511 // frame and the stack walking of interpreter_sender will get the unextended sp
3512 // value and not the "real" sp value.
3514 const Register sender_sp = r8;
3516 __ mov(sender_sp, rsp);
3517 __ movl(rbx, Address(rdi,
3518 Deoptimization::UnrollBlock::
3519 caller_adjustment_offset_in_bytes()));
3520 __ subptr(rsp, rbx);
3522 // Push interpreter frames in a loop
3523 Label loop;
3524 __ bind(loop);
3525 __ movptr(rbx, Address(rsi, 0)); // Load frame size
3526 #ifdef CC_INTERP
3527 __ subptr(rbx, 4*wordSize); // we'll push pc and ebp by hand and
3528 #ifdef ASSERT
3529 __ push(0xDEADDEAD); // Make a recognizable pattern
3530 __ push(0xDEADDEAD);
3531 #else /* ASSERT */
3532 __ subptr(rsp, 2*wordSize); // skip the "static long no_param"
3533 #endif /* ASSERT */
3534 #else
3535 __ subptr(rbx, 2*wordSize); // We'll push pc and ebp by hand
3536 #endif // CC_INTERP
3537 __ pushptr(Address(rcx, 0)); // Save return address
3538 __ enter(); // Save old & set new ebp
3539 __ subptr(rsp, rbx); // Prolog
3540 #ifdef CC_INTERP
3541 __ movptr(Address(rbp,
3542 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
3543 sender_sp); // Make it walkable
3544 #else /* CC_INTERP */
3545 // This value is corrected by layout_activation_impl
3546 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
3547 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), sender_sp); // Make it walkable
3548 #endif /* CC_INTERP */
3549 __ mov(sender_sp, rsp); // Pass sender_sp to next frame
3550 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
3551 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
3552 __ decrementl(rdx); // Decrement counter
3553 __ jcc(Assembler::notZero, loop);
3554 __ pushptr(Address(rcx, 0)); // Save final return address
3556 // Re-push self-frame
3557 __ enter(); // Save old & set new ebp
3559 // Allocate a full sized register save area.
3560 // Return address and rbp are in place, so we allocate two less words.
3561 __ subptr(rsp, (frame_size_in_words - 2) * wordSize);
3563 // Restore frame locals after moving the frame
3564 __ movdbl(Address(rsp, RegisterSaver::xmm0_offset_in_bytes()), xmm0);
3565 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
3567 // Call C code. Need thread but NOT official VM entry
3568 // crud. We cannot block on this call, no GC can happen. Call should
3569 // restore return values to their stack-slots with the new SP.
3570 //
3571 // void Deoptimization::unpack_frames(JavaThread* thread, int exec_mode)
3573 // Use rbp because the frames look interpreted now
3574 // Save "the_pc" since it cannot easily be retrieved using the last_java_SP after we aligned SP.
3575 // Don't need the precise return PC here, just precise enough to point into this code blob.
3576 address the_pc = __ pc();
3577 __ set_last_Java_frame(noreg, rbp, the_pc);
3579 __ andptr(rsp, -(StackAlignmentInBytes)); // Fix stack alignment as required by ABI
3580 __ mov(c_rarg0, r15_thread);
3581 __ movl(c_rarg1, r14); // second arg: exec_mode
3582 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
3583 // Revert SP alignment after call since we're going to do some SP relative addressing below
3584 __ movptr(rsp, Address(r15_thread, JavaThread::last_Java_sp_offset()));
3586 // Set an oopmap for the call site
3587 // Use the same PC we used for the last java frame
3588 oop_maps->add_gc_map(the_pc - start,
3589 new OopMap( frame_size_in_words, 0 ));
3591 // Clear fp AND pc
3592 __ reset_last_Java_frame(true, true);
3594 // Collect return values
3595 __ movdbl(xmm0, Address(rsp, RegisterSaver::xmm0_offset_in_bytes()));
3596 __ movptr(rax, Address(rsp, RegisterSaver::rax_offset_in_bytes()));
3597 // I think this is useless (throwing pc?)
3598 __ movptr(rdx, Address(rsp, RegisterSaver::rdx_offset_in_bytes()));
3600 // Pop self-frame.
3601 __ leave(); // Epilog
3603 // Jump to interpreter
3604 __ ret(0);
3606 // Make sure all code is generated
3607 masm->flush();
3609 _deopt_blob = DeoptimizationBlob::create(&buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words);
3610 _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset);
3611 }
3613 #ifdef COMPILER2
3614 //------------------------------generate_uncommon_trap_blob--------------------
3615 void SharedRuntime::generate_uncommon_trap_blob() {
3616 // Allocate space for the code
3617 ResourceMark rm;
3618 // Setup code generation tools
3619 CodeBuffer buffer("uncommon_trap_blob", 2048, 1024);
3620 MacroAssembler* masm = new MacroAssembler(&buffer);
3622 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
3624 address start = __ pc();
3626 if (UseRTMLocking) {
3627 // Abort RTM transaction before possible nmethod deoptimization.
3628 __ xabort(0);
3629 }
3631 // Push self-frame. We get here with a return address on the
3632 // stack, so rsp is 8-byte aligned until we allocate our frame.
3633 __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog!
3635 // No callee saved registers. rbp is assumed implicitly saved
3636 __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
3638 // compiler left unloaded_class_index in j_rarg0 move to where the
3639 // runtime expects it.
3640 __ movl(c_rarg1, j_rarg0);
3642 __ set_last_Java_frame(noreg, noreg, NULL);
3644 // Call C code. Need thread but NOT official VM entry
3645 // crud. We cannot block on this call, no GC can happen. Call should
3646 // capture callee-saved registers as well as return values.
3647 // Thread is in rdi already.
3648 //
3649 // UnrollBlock* uncommon_trap(JavaThread* thread, jint unloaded_class_index);
3651 __ mov(c_rarg0, r15_thread);
3652 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap)));
3654 // Set an oopmap for the call site
3655 OopMapSet* oop_maps = new OopMapSet();
3656 OopMap* map = new OopMap(SimpleRuntimeFrame::framesize, 0);
3658 // location of rbp is known implicitly by the frame sender code
3660 oop_maps->add_gc_map(__ pc() - start, map);
3662 __ reset_last_Java_frame(false, false);
3664 // Load UnrollBlock* into rdi
3665 __ mov(rdi, rax);
3667 // Pop all the frames we must move/replace.
3668 //
3669 // Frame picture (youngest to oldest)
3670 // 1: self-frame (no frame link)
3671 // 2: deopting frame (no frame link)
3672 // 3: caller of deopting frame (could be compiled/interpreted).
3674 // Pop self-frame. We have no frame, and must rely only on rax and rsp.
3675 __ addptr(rsp, (SimpleRuntimeFrame::framesize - 2) << LogBytesPerInt); // Epilog!
3677 // Pop deoptimized frame (int)
3678 __ movl(rcx, Address(rdi,
3679 Deoptimization::UnrollBlock::
3680 size_of_deoptimized_frame_offset_in_bytes()));
3681 __ addptr(rsp, rcx);
3683 // rsp should be pointing at the return address to the caller (3)
3685 // Pick up the initial fp we should save
3686 // restore rbp before stack bang because if stack overflow is thrown it needs to be pushed (and preserved)
3687 __ movptr(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_info_offset_in_bytes()));
3689 #ifdef ASSERT
3690 // Compilers generate code that bang the stack by as much as the
3691 // interpreter would need. So this stack banging should never
3692 // trigger a fault. Verify that it does not on non product builds.
3693 if (UseStackBanging) {
3694 __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes()));
3695 __ bang_stack_size(rbx, rcx);
3696 }
3697 #endif
3699 // Load address of array of frame pcs into rcx (address*)
3700 __ movptr(rcx, Address(rdi, Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes()));
3702 // Trash the return pc
3703 __ addptr(rsp, wordSize);
3705 // Load address of array of frame sizes into rsi (intptr_t*)
3706 __ movptr(rsi, Address(rdi, Deoptimization::UnrollBlock:: frame_sizes_offset_in_bytes()));
3708 // Counter
3709 __ movl(rdx, Address(rdi, Deoptimization::UnrollBlock:: number_of_frames_offset_in_bytes())); // (int)
3711 // Now adjust the caller's stack to make up for the extra locals but
3712 // record the original sp so that we can save it in the skeletal
3713 // interpreter frame and the stack walking of interpreter_sender
3714 // will get the unextended sp value and not the "real" sp value.
3716 const Register sender_sp = r8;
3718 __ mov(sender_sp, rsp);
3719 __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock:: caller_adjustment_offset_in_bytes())); // (int)
3720 __ subptr(rsp, rbx);
3722 // Push interpreter frames in a loop
3723 Label loop;
3724 __ bind(loop);
3725 __ movptr(rbx, Address(rsi, 0)); // Load frame size
3726 __ subptr(rbx, 2 * wordSize); // We'll push pc and rbp by hand
3727 __ pushptr(Address(rcx, 0)); // Save return address
3728 __ enter(); // Save old & set new rbp
3729 __ subptr(rsp, rbx); // Prolog
3730 #ifdef CC_INTERP
3731 __ movptr(Address(rbp,
3732 -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))),
3733 sender_sp); // Make it walkable
3734 #else // CC_INTERP
3735 __ movptr(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize),
3736 sender_sp); // Make it walkable
3737 // This value is corrected by layout_activation_impl
3738 __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD );
3739 #endif // CC_INTERP
3740 __ mov(sender_sp, rsp); // Pass sender_sp to next frame
3741 __ addptr(rsi, wordSize); // Bump array pointer (sizes)
3742 __ addptr(rcx, wordSize); // Bump array pointer (pcs)
3743 __ decrementl(rdx); // Decrement counter
3744 __ jcc(Assembler::notZero, loop);
3745 __ pushptr(Address(rcx, 0)); // Save final return address
3747 // Re-push self-frame
3748 __ enter(); // Save old & set new rbp
3749 __ subptr(rsp, (SimpleRuntimeFrame::framesize - 4) << LogBytesPerInt);
3750 // Prolog
3752 // Use rbp because the frames look interpreted now
3753 // Save "the_pc" since it cannot easily be retrieved using the last_java_SP after we aligned SP.
3754 // Don't need the precise return PC here, just precise enough to point into this code blob.
3755 address the_pc = __ pc();
3756 __ set_last_Java_frame(noreg, rbp, the_pc);
3758 // Call C code. Need thread but NOT official VM entry
3759 // crud. We cannot block on this call, no GC can happen. Call should
3760 // restore return values to their stack-slots with the new SP.
3761 // Thread is in rdi already.
3762 //
3763 // BasicType unpack_frames(JavaThread* thread, int exec_mode);
3765 __ andptr(rsp, -(StackAlignmentInBytes)); // Align SP as required by ABI
3766 __ mov(c_rarg0, r15_thread);
3767 __ movl(c_rarg1, Deoptimization::Unpack_uncommon_trap);
3768 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames)));
3770 // Set an oopmap for the call site
3771 // Use the same PC we used for the last java frame
3772 oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0));
3774 // Clear fp AND pc
3775 __ reset_last_Java_frame(true, true);
3777 // Pop self-frame.
3778 __ leave(); // Epilog
3780 // Jump to interpreter
3781 __ ret(0);
3783 // Make sure all code is generated
3784 masm->flush();
3786 _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps,
3787 SimpleRuntimeFrame::framesize >> 1);
3788 }
3789 #endif // COMPILER2
3792 //------------------------------generate_handler_blob------
3793 //
3794 // Generate a special Compile2Runtime blob that saves all registers,
3795 // and setup oopmap.
3796 //
3797 SafepointBlob* SharedRuntime::generate_handler_blob(address call_ptr, int poll_type) {
3798 assert(StubRoutines::forward_exception_entry() != NULL,
3799 "must be generated before");
3801 ResourceMark rm;
3802 OopMapSet *oop_maps = new OopMapSet();
3803 OopMap* map;
3805 // Allocate space for the code. Setup code generation tools.
3806 CodeBuffer buffer("handler_blob", 2048, 1024);
3807 MacroAssembler* masm = new MacroAssembler(&buffer);
3809 address start = __ pc();
3810 address call_pc = NULL;
3811 int frame_size_in_words;
3812 bool cause_return = (poll_type == POLL_AT_RETURN);
3813 bool save_vectors = (poll_type == POLL_AT_VECTOR_LOOP);
3815 if (UseRTMLocking) {
3816 // Abort RTM transaction before calling runtime
3817 // because critical section will be large and will be
3818 // aborted anyway. Also nmethod could be deoptimized.
3819 __ xabort(0);
3820 }
3822 // Make room for return address (or push it again)
3823 if (!cause_return) {
3824 __ push(rbx);
3825 }
3827 // Save registers, fpu state, and flags
3828 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words, save_vectors);
3830 // The following is basically a call_VM. However, we need the precise
3831 // address of the call in order to generate an oopmap. Hence, we do all the
3832 // work outselves.
3834 __ set_last_Java_frame(noreg, noreg, NULL);
3836 // The return address must always be correct so that frame constructor never
3837 // sees an invalid pc.
3839 if (!cause_return) {
3840 // overwrite the dummy value we pushed on entry
3841 __ movptr(c_rarg0, Address(r15_thread, JavaThread::saved_exception_pc_offset()));
3842 __ movptr(Address(rbp, wordSize), c_rarg0);
3843 }
3845 // Do the call
3846 __ mov(c_rarg0, r15_thread);
3847 __ call(RuntimeAddress(call_ptr));
3849 // Set an oopmap for the call site. This oopmap will map all
3850 // oop-registers and debug-info registers as callee-saved. This
3851 // will allow deoptimization at this safepoint to find all possible
3852 // debug-info recordings, as well as let GC find all oops.
3854 oop_maps->add_gc_map( __ pc() - start, map);
3856 Label noException;
3858 __ reset_last_Java_frame(false, false);
3860 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3861 __ jcc(Assembler::equal, noException);
3863 // Exception pending
3865 RegisterSaver::restore_live_registers(masm, save_vectors);
3867 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3869 // No exception case
3870 __ bind(noException);
3872 // Normal exit, restore registers and exit.
3873 RegisterSaver::restore_live_registers(masm, save_vectors);
3875 __ ret(0);
3877 // Make sure all code is generated
3878 masm->flush();
3880 // Fill-out other meta info
3881 return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words);
3882 }
3884 //
3885 // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss
3886 //
3887 // Generate a stub that calls into vm to find out the proper destination
3888 // of a java call. All the argument registers are live at this point
3889 // but since this is generic code we don't know what they are and the caller
3890 // must do any gc of the args.
3891 //
3892 RuntimeStub* SharedRuntime::generate_resolve_blob(address destination, const char* name) {
3893 assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before");
3895 // allocate space for the code
3896 ResourceMark rm;
3898 CodeBuffer buffer(name, 1000, 512);
3899 MacroAssembler* masm = new MacroAssembler(&buffer);
3901 int frame_size_in_words;
3903 OopMapSet *oop_maps = new OopMapSet();
3904 OopMap* map = NULL;
3906 int start = __ offset();
3908 map = RegisterSaver::save_live_registers(masm, 0, &frame_size_in_words);
3910 int frame_complete = __ offset();
3912 __ set_last_Java_frame(noreg, noreg, NULL);
3914 __ mov(c_rarg0, r15_thread);
3916 __ call(RuntimeAddress(destination));
3919 // Set an oopmap for the call site.
3920 // We need this not only for callee-saved registers, but also for volatile
3921 // registers that the compiler might be keeping live across a safepoint.
3923 oop_maps->add_gc_map( __ offset() - start, map);
3925 // rax contains the address we are going to jump to assuming no exception got installed
3927 // clear last_Java_sp
3928 __ reset_last_Java_frame(false, false);
3929 // check for pending exceptions
3930 Label pending;
3931 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD);
3932 __ jcc(Assembler::notEqual, pending);
3934 // get the returned Method*
3935 __ get_vm_result_2(rbx, r15_thread);
3936 __ movptr(Address(rsp, RegisterSaver::rbx_offset_in_bytes()), rbx);
3938 __ movptr(Address(rsp, RegisterSaver::rax_offset_in_bytes()), rax);
3940 RegisterSaver::restore_live_registers(masm);
3942 // We are back the the original state on entry and ready to go.
3944 __ jmp(rax);
3946 // Pending exception after the safepoint
3948 __ bind(pending);
3950 RegisterSaver::restore_live_registers(masm);
3952 // exception pending => remove activation and forward to exception handler
3954 __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), (int)NULL_WORD);
3956 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset()));
3957 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry()));
3959 // -------------
3960 // make sure all code is generated
3961 masm->flush();
3963 // return the blob
3964 // frame_size_words or bytes??
3965 return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_in_words, oop_maps, true);
3966 }
3969 #ifdef COMPILER2
3970 // This is here instead of runtime_x86_64.cpp because it uses SimpleRuntimeFrame
3971 //
3972 //------------------------------generate_exception_blob---------------------------
3973 // creates exception blob at the end
3974 // Using exception blob, this code is jumped from a compiled method.
3975 // (see emit_exception_handler in x86_64.ad file)
3976 //
3977 // Given an exception pc at a call we call into the runtime for the
3978 // handler in this method. This handler might merely restore state
3979 // (i.e. callee save registers) unwind the frame and jump to the
3980 // exception handler for the nmethod if there is no Java level handler
3981 // for the nmethod.
3982 //
3983 // This code is entered with a jmp.
3984 //
3985 // Arguments:
3986 // rax: exception oop
3987 // rdx: exception pc
3988 //
3989 // Results:
3990 // rax: exception oop
3991 // rdx: exception pc in caller or ???
3992 // destination: exception handler of caller
3993 //
3994 // Note: the exception pc MUST be at a call (precise debug information)
3995 // Registers rax, rdx, rcx, rsi, rdi, r8-r11 are not callee saved.
3996 //
3998 void OptoRuntime::generate_exception_blob() {
3999 assert(!OptoRuntime::is_callee_saved_register(RDX_num), "");
4000 assert(!OptoRuntime::is_callee_saved_register(RAX_num), "");
4001 assert(!OptoRuntime::is_callee_saved_register(RCX_num), "");
4003 assert(SimpleRuntimeFrame::framesize % 4 == 0, "sp not 16-byte aligned");
4005 // Allocate space for the code
4006 ResourceMark rm;
4007 // Setup code generation tools
4008 CodeBuffer buffer("exception_blob", 2048, 1024);
4009 MacroAssembler* masm = new MacroAssembler(&buffer);
4012 address start = __ pc();
4014 // Exception pc is 'return address' for stack walker
4015 __ push(rdx);
4016 __ subptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Prolog
4018 // Save callee-saved registers. See x86_64.ad.
4020 // rbp is an implicitly saved callee saved register (i.e. the calling
4021 // convention will save restore it in prolog/epilog) Other than that
4022 // there are no callee save registers now that adapter frames are gone.
4024 __ movptr(Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt), rbp);
4026 // Store exception in Thread object. We cannot pass any arguments to the
4027 // handle_exception call, since we do not want to make any assumption
4028 // about the size of the frame where the exception happened in.
4029 // c_rarg0 is either rdi (Linux) or rcx (Windows).
4030 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()),rax);
4031 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), rdx);
4033 // This call does all the hard work. It checks if an exception handler
4034 // exists in the method.
4035 // If so, it returns the handler address.
4036 // If not, it prepares for stack-unwinding, restoring the callee-save
4037 // registers of the frame being removed.
4038 //
4039 // address OptoRuntime::handle_exception_C(JavaThread* thread)
4041 // At a method handle call, the stack may not be properly aligned
4042 // when returning with an exception.
4043 address the_pc = __ pc();
4044 __ set_last_Java_frame(noreg, noreg, the_pc);
4045 __ mov(c_rarg0, r15_thread);
4046 __ andptr(rsp, -(StackAlignmentInBytes)); // Align stack
4047 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, OptoRuntime::handle_exception_C)));
4049 // Set an oopmap for the call site. This oopmap will only be used if we
4050 // are unwinding the stack. Hence, all locations will be dead.
4051 // Callee-saved registers will be the same as the frame above (i.e.,
4052 // handle_exception_stub), since they were restored when we got the
4053 // exception.
4055 OopMapSet* oop_maps = new OopMapSet();
4057 oop_maps->add_gc_map(the_pc - start, new OopMap(SimpleRuntimeFrame::framesize, 0));
4059 __ reset_last_Java_frame(false, true);
4061 // Restore callee-saved registers
4063 // rbp is an implicitly saved callee saved register (i.e. the calling
4064 // convention will save restore it in prolog/epilog) Other than that
4065 // there are no callee save registers no that adapter frames are gone.
4067 __ movptr(rbp, Address(rsp, SimpleRuntimeFrame::rbp_off << LogBytesPerInt));
4069 __ addptr(rsp, SimpleRuntimeFrame::return_off << LogBytesPerInt); // Epilog
4070 __ pop(rdx); // No need for exception pc anymore
4072 // rax: exception handler
4074 // Restore SP from BP if the exception PC is a MethodHandle call site.
4075 __ cmpl(Address(r15_thread, JavaThread::is_method_handle_return_offset()), 0);
4076 __ cmovptr(Assembler::notEqual, rsp, rbp_mh_SP_save);
4078 // We have a handler in rax (could be deopt blob).
4079 __ mov(r8, rax);
4081 // Get the exception oop
4082 __ movptr(rax, Address(r15_thread, JavaThread::exception_oop_offset()));
4083 // Get the exception pc in case we are deoptimized
4084 __ movptr(rdx, Address(r15_thread, JavaThread::exception_pc_offset()));
4085 #ifdef ASSERT
4086 __ movptr(Address(r15_thread, JavaThread::exception_handler_pc_offset()), (int)NULL_WORD);
4087 __ movptr(Address(r15_thread, JavaThread::exception_pc_offset()), (int)NULL_WORD);
4088 #endif
4089 // Clear the exception oop so GC no longer processes it as a root.
4090 __ movptr(Address(r15_thread, JavaThread::exception_oop_offset()), (int)NULL_WORD);
4092 // rax: exception oop
4093 // r8: exception handler
4094 // rdx: exception pc
4095 // Jump to handler
4097 __ jmp(r8);
4099 // Make sure all code is generated
4100 masm->flush();
4102 // Set exception blob
4103 _exception_blob = ExceptionBlob::create(&buffer, oop_maps, SimpleRuntimeFrame::framesize >> 1);
4104 }
4105 #endif // COMPILER2