jdk8-mips64-public/hotspot: src/cpu/sparc/vm/nativeInst

src/cpu/sparc/vm/nativeInst_sparc.hpp@d5fc211aea19 (annotated)

src/cpu/sparc/vm/nativeInst_sparc.hpp

Mon, 25 Feb 2008 15:05:44 -0800

author: kvn
date: Mon, 25 Feb 2008 15:05:44 -0800
changeset 464: d5fc211aea19
parent 435: a61af66fc99e
child 551: 018d5b58dd4f
permissions: -rw-r--r--

6633953: type2aelembytes{T_ADDRESS} should be 8 bytes in 64 bit VM
Summary: T_ADDRESS size is defined as 'int' size (4 bytes) but C2 use it for raw pointers and as memory type for StoreP and LoadP nodes.
Reviewed-by: jrose

 /*
  * Copyright 1997-2007 Sun Microsystems, Inc.  All Rights Reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 only, as
  * published by the Free Software Foundation.
  *
  * This code is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * version 2 for more details (a copy is included in the LICENSE file that
  * accompanied this code).
  *
  * You should have received a copy of the GNU General Public License version
  * 2 along with this work; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
  * CA 95054 USA or visit www.sun.com if you need additional information or
  * have any questions.
  *
  */
 // We have interface for the following instructions:
 // - NativeInstruction
 // - - NativeCall
 // - - NativeFarCall
 // - - NativeMovConstReg
 // - - NativeMovConstRegPatching
 // - - NativeMovRegMem
 // - - NativeMovRegMemPatching
 // - - NativeJump
 // - - NativeGeneralJump
 // - - NativeIllegalInstruction
 // The base class for different kinds of native instruction abstractions.
 // Provides the primitive operations to manipulate code relative to this.
 class NativeInstruction VALUE_OBJ_CLASS_SPEC {
   friend class Relocation;
  public:
   enum Sparc_specific_constants {
     nop_instruction_size        =    4
   };
   bool is_nop()                        { return long_at(0) == nop_instruction(); }
   bool is_call()                       { return is_op(long_at(0), Assembler::call_op); }
   bool is_sethi()                      { return (is_op2(long_at(0), Assembler::sethi_op2)
                                           && inv_rd(long_at(0)) != G0); }
   bool sets_cc() {
     // conservative (returns true for some instructions that do not set the
     // the condition code, such as, "save".
     // Does not return true for the deprecated tagged instructions, such as, TADDcc
     int x = long_at(0);
     return (is_op(x, Assembler::arith_op) &&
             (inv_op3(x) & Assembler::cc_bit_op3) == Assembler::cc_bit_op3);
   }
   bool is_illegal();
   bool is_zombie() {
     int x = long_at(0);
     return is_op3(x,
                   VM_Version::v9_instructions_work() ?
                     Assembler::ldsw_op3 : Assembler::lduw_op3,
                   Assembler::ldst_op)
         && Assembler::inv_rs1(x) == G0
         && Assembler::inv_rd(x) == O7;
   }
   bool is_ic_miss_trap();       // Inline-cache uses a trap to detect a miss
   bool is_return() {
     // is it the output of MacroAssembler::ret or MacroAssembler::retl?
     int x = long_at(0);
     const int pc_return_offset = 8; // see frame_sparc.hpp
     return is_op3(x, Assembler::jmpl_op3, Assembler::arith_op)
         && (inv_rs1(x) == I7 || inv_rs1(x) == O7)
         && inv_immed(x) && inv_simm(x, 13) == pc_return_offset
         && inv_rd(x) == G0;
   }
   bool is_int_jump() {
     // is it the output of MacroAssembler::b?
     int x = long_at(0);
     return is_op2(x, Assembler::bp_op2) || is_op2(x, Assembler::br_op2);
   }
   bool is_float_jump() {
     // is it the output of MacroAssembler::fb?
     int x = long_at(0);
     return is_op2(x, Assembler::fbp_op2) || is_op2(x, Assembler::fb_op2);
   }
   bool is_jump() {
     return is_int_jump() || is_float_jump();
   }
   bool is_cond_jump() {
     int x = long_at(0);
     return (is_int_jump() && Assembler::inv_cond(x) != Assembler::always) ||
            (is_float_jump() && Assembler::inv_cond(x) != Assembler::f_always);
   }
   bool is_stack_bang() {
     int x = long_at(0);
     return is_op3(x, Assembler::stw_op3, Assembler::ldst_op) &&
       (inv_rd(x) == G0) && (inv_rs1(x) == SP) && (inv_rs2(x) == G3_scratch);
   }
   bool is_prefetch() {
     int x = long_at(0);
     return is_op3(x, Assembler::prefetch_op3, Assembler::ldst_op);
   }
   bool is_membar() {
     int x = long_at(0);
     return is_op3(x, Assembler::membar_op3, Assembler::arith_op) &&
       (inv_rd(x) == G0) && (inv_rs1(x) == O7);
   }
   bool is_safepoint_poll() {
     int x = long_at(0);
 #ifdef _LP64
     return is_op3(x, Assembler::ldx_op3,  Assembler::ldst_op) &&
 #else
     return is_op3(x, Assembler::lduw_op3, Assembler::ldst_op) &&
 #endif
       (inv_rd(x) == G0) && (inv_immed(x) ? Assembler::inv_simm13(x) == 0 : inv_rs2(x) == G0);
   }
   bool is_zero_test(Register &reg);
   bool is_load_store_with_small_offset(Register reg);
  public:
 #ifdef ASSERT
   static int rdpc_instruction()        { return Assembler::op(Assembler::arith_op ) | Assembler::op3(Assembler::rdreg_op3) | Assembler::u_field(5, 18, 14) | Assembler::rd(O7); }
 #else
   // Temporary fix: in optimized mode, u_field is a macro for efficiency reasons (see Assembler::u_field) - needs to be fixed
   static int rdpc_instruction()        { return Assembler::op(Assembler::arith_op ) | Assembler::op3(Assembler::rdreg_op3) |            u_field(5, 18, 14) | Assembler::rd(O7); }
 #endif
   static int nop_instruction()         { return Assembler::op(Assembler::branch_op) | Assembler::op2(Assembler::sethi_op2); }
   static int illegal_instruction();    // the output of __ breakpoint_trap()
   static int call_instruction(address destination, address pc) { return Assembler::op(Assembler::call_op) | Assembler::wdisp((intptr_t)destination, (intptr_t)pc, 30); }
   static int branch_instruction(Assembler::op2s op2val, Assembler::Condition c, bool a) {
     return Assembler::op(Assembler::branch_op) | Assembler::op2(op2val) | Assembler::annul(a) | Assembler::cond(c);
   }
   static int op3_instruction(Assembler::ops opval, Register rd, Assembler::op3s op3val, Register rs1, int simm13a) {
     return Assembler::op(opval) | Assembler::rd(rd) | Assembler::op3(op3val) | Assembler::rs1(rs1) | Assembler::immed(true) | Assembler::simm(simm13a, 13);
   }
   static int sethi_instruction(Register rd, int imm22a) {
     return Assembler::op(Assembler::branch_op) | Assembler::rd(rd) | Assembler::op2(Assembler::sethi_op2) | Assembler::hi22(imm22a);
   }
  protected:
   address  addr_at(int offset) const    { return address(this) + offset; }
   int      long_at(int offset) const    { return *(int*)addr_at(offset); }
   void set_long_at(int offset, int i);      /* deals with I-cache */
   void set_jlong_at(int offset, jlong i);   /* deals with I-cache */
   void set_addr_at(int offset, address x);  /* deals with I-cache */
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(BytesPerInstWord); }
   static bool is_op( int x, Assembler::ops opval)  {
     return Assembler::inv_op(x) == opval;
   }
   static bool is_op2(int x, Assembler::op2s op2val) {
     return Assembler::inv_op(x) == Assembler::branch_op && Assembler::inv_op2(x) == op2val;
   }
   static bool is_op3(int x, Assembler::op3s op3val, Assembler::ops opval) {
     return Assembler::inv_op(x) == opval && Assembler::inv_op3(x) == op3val;
   }
   // utilities to help subclasses decode:
   static Register inv_rd(  int x ) { return Assembler::inv_rd( x); }
   static Register inv_rs1( int x ) { return Assembler::inv_rs1(x); }
   static Register inv_rs2( int x ) { return Assembler::inv_rs2(x); }
   static bool inv_immed( int x ) { return Assembler::inv_immed(x); }
   static bool inv_annul( int x ) { return (Assembler::annul(true) & x) != 0; }
   static int  inv_cond(  int x ) { return Assembler::inv_cond(x); }
   static int inv_op(  int x ) { return Assembler::inv_op( x); }
   static int inv_op2( int x ) { return Assembler::inv_op2(x); }
   static int inv_op3( int x ) { return Assembler::inv_op3(x); }
   static int inv_simm(    int x, int nbits ) { return Assembler::inv_simm(x, nbits); }
   static intptr_t inv_wdisp(   int x, int nbits ) { return Assembler::inv_wdisp(  x, 0, nbits); }
   static intptr_t inv_wdisp16( int x )            { return Assembler::inv_wdisp16(x, 0); }
   static int branch_destination_offset(int x) { return Assembler::branch_destination(x, 0); }
   static int patch_branch_destination_offset(int dest_offset, int x) {
     return Assembler::patched_branch(dest_offset, x, 0);
   }
   void set_annul_bit() { set_long_at(0, long_at(0) | Assembler::annul(true)); }
   // utility for checking if x is either of 2 small constants
   static bool is_either(int x, int k1, int k2) {
     // return x == k1 || x == k2;
     return (1 << x) & (1 << k1 | 1 << k2);
   }
   // utility for checking overflow of signed instruction fields
   static bool fits_in_simm(int x, int nbits) {
     // cf. Assembler::assert_signed_range()
     // return -(1 << nbits-1) <= x  &&  x < ( 1 << nbits-1),
     return (unsigned)(x + (1 << nbits-1)) < (unsigned)(1 << nbits);
   }
   // set a signed immediate field
   static int set_simm(int insn, int imm, int nbits) {
     return (insn &~ Assembler::simm(-1, nbits)) | Assembler::simm(imm, nbits);
   }
   // set a wdisp field (disp should be the difference of two addresses)
   static int set_wdisp(int insn, intptr_t disp, int nbits) {
     return (insn &~ Assembler::wdisp((intptr_t)-4, (intptr_t)0, nbits)) | Assembler::wdisp(disp, 0, nbits);
   }
   static int set_wdisp16(int insn, intptr_t disp) {
     return (insn &~ Assembler::wdisp16((intptr_t)-4, 0)) | Assembler::wdisp16(disp, 0);
   }
   // get a simm13 field from an arithmetic or memory instruction
   static int get_simm13(int insn) {
     assert(is_either(Assembler::inv_op(insn),
                      Assembler::arith_op, Assembler::ldst_op) &&
             (insn & Assembler::immed(true)), "must have a simm13 field");
     return Assembler::inv_simm(insn, 13);
   }
   // set the simm13 field of an arithmetic or memory instruction
   static bool set_simm13(int insn, int imm) {
     get_simm13(insn);           // tickle the assertion check
     return set_simm(insn, imm, 13);
   }
   // combine the fields of a sethi stream (7 instructions ) and an add, jmp or ld/st
   static intptr_t data64( address pc, int arith_insn ) {
     assert(is_op2(*(unsigned int *)pc, Assembler::sethi_op2), "must be sethi");
     intptr_t hi = (intptr_t)gethi( (unsigned int *)pc );
     intptr_t lo = (intptr_t)get_simm13(arith_insn);
     assert((unsigned)lo < (1 << 10), "offset field of set_oop must be 10 bits");
     return hi | lo;
   }
   // Regenerate the instruction sequence that performs the 64 bit
   // sethi.  This only does the sethi.  The disp field (bottom 10 bits)
   // must be handled seperately.
   static void set_data64_sethi(address instaddr, intptr_t x);
   // combine the fields of a sethi/simm13 pair (simm13 = or, add, jmpl, ld/st)
   static int data32(int sethi_insn, int arith_insn) {
     assert(is_op2(sethi_insn, Assembler::sethi_op2), "must be sethi");
     int hi = Assembler::inv_hi22(sethi_insn);
     int lo = get_simm13(arith_insn);
     assert((unsigned)lo < (1 << 10), "offset field of set_oop must be 10 bits");
     return hi | lo;
   }
   static int set_data32_sethi(int sethi_insn, int imm) {
     // note that Assembler::hi22 clips the low 10 bits for us
     assert(is_op2(sethi_insn, Assembler::sethi_op2), "must be sethi");
     return (sethi_insn &~ Assembler::hi22(-1)) | Assembler::hi22(imm);
   }
   static int set_data32_simm13(int arith_insn, int imm) {
     get_simm13(arith_insn);             // tickle the assertion check
     int imm10 = Assembler::low10(imm);
     return (arith_insn &~ Assembler::simm(-1, 13)) | Assembler::simm(imm10, 13);
   }
   static int low10(int imm) {
     return Assembler::low10(imm);
   }
   // Perform the inverse of the LP64 Macroassembler::sethi
   // routine.  Extracts the 54 bits of address from the instruction
   // stream. This routine must agree with the sethi routine in
   // assembler_inline_sparc.hpp
   static address gethi( unsigned int *pc ) {
     int i = 0;
     uintptr_t adr;
     // We first start out with the real sethi instruction
     assert(is_op2(*pc, Assembler::sethi_op2), "in gethi - must be sethi");
     adr = (unsigned int)Assembler::inv_hi22( *(pc++) );
     i++;
     while ( i < 7 ) {
        // We're done if we hit a nop
        if ( (int)*pc == nop_instruction() ) break;
        assert ( Assembler::inv_op(*pc) == Assembler::arith_op, "in gethi - must be arith_op" );
        switch  ( Assembler::inv_op3(*pc) ) {
          case Assembler::xor_op3:
            adr ^= (intptr_t)get_simm13( *pc );
            return ( (address)adr );
            break;
          case Assembler::sll_op3:
            adr <<= ( *pc & 0x3f );
            break;
          case Assembler::or_op3:
            adr |= (intptr_t)get_simm13( *pc );
            break;
          default:
            assert ( 0, "in gethi - Should not reach here" );
            break;
        }
        pc++;
        i++;
     }
     return ( (address)adr );
   }
  public:
   void  verify();
   void  print();
   // unit test stuff
   static void test() {}                 // override for testing
   inline friend NativeInstruction* nativeInstruction_at(address address);
 };
 inline NativeInstruction* nativeInstruction_at(address address) {
     NativeInstruction* inst = (NativeInstruction*)address;
 #ifdef ASSERT
       inst->verify();
 #endif
     return inst;
 }
 //-----------------------------------------------------------------------------
 // The NativeCall is an abstraction for accessing/manipulating native call imm32 instructions.
 // (used to manipulate inline caches, primitive & dll calls, etc.)
 inline NativeCall* nativeCall_at(address instr);
 inline NativeCall* nativeCall_overwriting_at(address instr,
                                              address destination);
 inline NativeCall* nativeCall_before(address return_address);
 class NativeCall: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     instruction_size                   = 8,
     return_address_offset              = 8,
     call_displacement_width            = 30,
     displacement_offset                = 0,
     instruction_offset                 = 0
   };
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(instruction_size); }
   address return_address() const            { return addr_at(return_address_offset); }
   address destination() const               { return inv_wdisp(long_at(0), call_displacement_width) + instruction_address(); }
   address displacement_address() const      { return addr_at(displacement_offset); }
   void  set_destination(address dest)       { set_long_at(0, set_wdisp(long_at(0), dest - instruction_address(), call_displacement_width)); }
   void  set_destination_mt_safe(address dest);
   void  verify_alignment() {} // do nothing on sparc
   void  verify();
   void  print();
   // unit test stuff
   static void  test();
   // Creation
   friend inline NativeCall* nativeCall_at(address instr);
   friend NativeCall* nativeCall_overwriting_at(address instr, address destination = NULL) {
     // insert a "blank" call:
     NativeCall* call = (NativeCall*)instr;
     call->set_long_at(0 * BytesPerInstWord, call_instruction(destination, instr));
     call->set_long_at(1 * BytesPerInstWord, nop_instruction());
     assert(call->addr_at(2 * BytesPerInstWord) - instr == instruction_size, "instruction size");
     // check its structure now:
     assert(nativeCall_at(instr)->destination() == destination, "correct call destination");
     return call;
   }
   friend inline NativeCall* nativeCall_before(address return_address) {
     NativeCall* call = (NativeCall*)(return_address - return_address_offset);
     #ifdef ASSERT
       call->verify();
     #endif
     return call;
   }
   static bool is_call_at(address instr) {
     return nativeInstruction_at(instr)->is_call();
   }
   static bool is_call_before(address instr) {
     return nativeInstruction_at(instr - return_address_offset)->is_call();
   }
   static bool is_call_to(address instr, address target) {
     return nativeInstruction_at(instr)->is_call() &&
       nativeCall_at(instr)->destination() == target;
   }
   // MT-safe patching of a call instruction.
   static void insert(address code_pos, address entry) {
     (void)nativeCall_overwriting_at(code_pos, entry);
   }
   static void replace_mt_safe(address instr_addr, address code_buffer);
 };
 inline NativeCall* nativeCall_at(address instr) {
   NativeCall* call = (NativeCall*)instr;
 #ifdef ASSERT
   call->verify();
 #endif
   return call;
 }
 // The NativeFarCall is an abstraction for accessing/manipulating native call-anywhere
 // instructions in the sparcv9 vm.  Used to call native methods which may be loaded
 // anywhere in the address space, possibly out of reach of a call instruction.
 #ifndef _LP64
 // On 32-bit systems, a far call is the same as a near one.
 class NativeFarCall;
 inline NativeFarCall* nativeFarCall_at(address instr);
 class NativeFarCall : public NativeCall {
 public:
   friend inline NativeFarCall* nativeFarCall_at(address instr) { return (NativeFarCall*)nativeCall_at(instr); }
   friend NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination = NULL)
                                                         { return (NativeFarCall*)nativeCall_overwriting_at(instr, destination); }
   friend NativeFarCall* nativeFarCall_before(address return_address)
                                                         { return (NativeFarCall*)nativeCall_before(return_address); }
 };
 #else
 // The format of this extended-range call is:
 //      jumpl_to addr, lreg
 //      == sethi %hi54(addr), O7 ;  jumpl O7, %lo10(addr), O7 ;  <delay>
 // That is, it is essentially the same as a NativeJump.
 class NativeFarCall;
 inline NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination);
 inline NativeFarCall* nativeFarCall_at(address instr);
 class NativeFarCall: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     // instruction_size includes the delay slot instruction.
     instruction_size                   = 9 * BytesPerInstWord,
     return_address_offset              = 9 * BytesPerInstWord,
     jmpl_offset                        = 7 * BytesPerInstWord,
     displacement_offset                = 0,
     instruction_offset                 = 0
   };
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(instruction_size); }
   address return_address() const            { return addr_at(return_address_offset); }
   address destination() const {
     return (address) data64(addr_at(0), long_at(jmpl_offset));
   }
   address displacement_address() const      { return addr_at(displacement_offset); }
   void set_destination(address dest);
   bool destination_is_compiled_verified_entry_point();
   void  verify();
   void  print();
   // unit test stuff
   static void  test();
   // Creation
   friend inline NativeFarCall* nativeFarCall_at(address instr) {
     NativeFarCall* call = (NativeFarCall*)instr;
     #ifdef ASSERT
       call->verify();
     #endif
     return call;
   }
   friend inline NativeFarCall* nativeFarCall_overwriting_at(address instr, address destination = NULL) {
     Unimplemented();
     NativeFarCall* call = (NativeFarCall*)instr;
     return call;
   }
   friend NativeFarCall* nativeFarCall_before(address return_address) {
     NativeFarCall* call = (NativeFarCall*)(return_address - return_address_offset);
     #ifdef ASSERT
       call->verify();
     #endif
     return call;
   }
   static bool is_call_at(address instr);
   // MT-safe patching of a call instruction.
   static void insert(address code_pos, address entry) {
     (void)nativeFarCall_overwriting_at(code_pos, entry);
   }
   static void replace_mt_safe(address instr_addr, address code_buffer);
 };
 #endif // _LP64
 // An interface for accessing/manipulating native set_oop imm, reg instructions.
 // (used to manipulate inlined data references, etc.)
 //      set_oop imm, reg
 //      == sethi %hi22(imm), reg ;  add reg, %lo10(imm), reg
 class NativeMovConstReg;
 inline NativeMovConstReg* nativeMovConstReg_at(address address);
 class NativeMovConstReg: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     sethi_offset           = 0,
 #ifdef _LP64
     add_offset             = 7 * BytesPerInstWord,
     instruction_size       = 8 * BytesPerInstWord
 #else
     add_offset             = 4,
     instruction_size       = 8
 #endif
   };
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(instruction_size); }
   // (The [set_]data accessor respects oop_type relocs also.)
   intptr_t data() const;
   void set_data(intptr_t x);
   // report the destination register
   Register destination() { return inv_rd(long_at(sethi_offset)); }
   void  verify();
   void  print();
   // unit test stuff
   static void test();
   // Creation
   friend inline NativeMovConstReg* nativeMovConstReg_at(address address) {
     NativeMovConstReg* test = (NativeMovConstReg*)address;
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
   friend NativeMovConstReg* nativeMovConstReg_before(address address) {
     NativeMovConstReg* test = (NativeMovConstReg*)(address - instruction_size);
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
 };
 // An interface for accessing/manipulating native set_oop imm, reg instructions.
 // (used to manipulate inlined data references, etc.)
 //      set_oop imm, reg
 //      == sethi %hi22(imm), reg; nop; add reg, %lo10(imm), reg
 //
 // Note that it is identical to NativeMovConstReg with the exception of a nop between the
 // sethi and the add.  The nop is required to be in the delay slot of the call instruction
 // which overwrites the sethi during patching.
 class NativeMovConstRegPatching;
 inline NativeMovConstRegPatching* nativeMovConstRegPatching_at(address address);class NativeMovConstRegPatching: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     sethi_offset           = 0,
 #ifdef _LP64
     nop_offset             = 7 * BytesPerInstWord,
 #else
     nop_offset             = sethi_offset + BytesPerInstWord,
 #endif
     add_offset             = nop_offset   + BytesPerInstWord,
     instruction_size       = add_offset   + BytesPerInstWord
   };
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(instruction_size); }
   // (The [set_]data accessor respects oop_type relocs also.)
   int data() const;
   void  set_data(int x);
   // report the destination register
   Register destination() { return inv_rd(long_at(sethi_offset)); }
   void  verify();
   void  print();
   // unit test stuff
   static void test();
   // Creation
   friend inline NativeMovConstRegPatching* nativeMovConstRegPatching_at(address address) {
     NativeMovConstRegPatching* test = (NativeMovConstRegPatching*)address;
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
   friend NativeMovConstRegPatching* nativeMovConstRegPatching_before(address address) {
     NativeMovConstRegPatching* test = (NativeMovConstRegPatching*)(address - instruction_size);
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
 };
 // An interface for accessing/manipulating native memory ops
 //      ld* [reg + offset], reg
 //      st* reg, [reg + offset]
 //      sethi %hi(imm), reg; add reg, %lo(imm), reg; ld* [reg1 + reg], reg2
 //      sethi %hi(imm), reg; add reg, %lo(imm), reg; st* reg2, [reg1 + reg]
 // Ops covered: {lds,ldu,st}{w,b,h}, {ld,st}{d,x}
 //
 class NativeMovRegMem;
 inline NativeMovRegMem* nativeMovRegMem_at (address address);
 class NativeMovRegMem: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     op3_mask_ld = 1 << Assembler::lduw_op3 |
 << Assembler::ldub_op3 |
 << Assembler::lduh_op3 |
 << Assembler::ldd_op3 |
 << Assembler::ldsw_op3 |
 << Assembler::ldsb_op3 |
 << Assembler::ldsh_op3 |
 << Assembler::ldx_op3,
     op3_mask_st = 1 << Assembler::stw_op3 |
 << Assembler::stb_op3 |
 << Assembler::sth_op3 |
 << Assembler::std_op3 |
 << Assembler::stx_op3,
     op3_ldst_int_limit = Assembler::ldf_op3,
     op3_mask_ldf = 1 << (Assembler::ldf_op3  - op3_ldst_int_limit) |
 << (Assembler::lddf_op3 - op3_ldst_int_limit),
     op3_mask_stf = 1 << (Assembler::stf_op3  - op3_ldst_int_limit) |
 << (Assembler::stdf_op3 - op3_ldst_int_limit),
     offset_width    = 13,
     sethi_offset    = 0,
 #ifdef _LP64
     add_offset      = 7 * BytesPerInstWord,
 #else
     add_offset      = 4,
 #endif
     ldst_offset     = add_offset + BytesPerInstWord
   };
   bool is_immediate() const {
     // check if instruction is ld* [reg + offset], reg or st* reg, [reg + offset]
     int i0 = long_at(0);
     return (is_op(i0, Assembler::ldst_op));
   }
   address instruction_address() const           { return addr_at(0); }
   address next_instruction_address() const      {
 #ifdef _LP64
     return addr_at(is_immediate() ? 4 : (7 * BytesPerInstWord));
 #else
     return addr_at(is_immediate() ? 4 : 12);
 #endif
   }
   intptr_t   offset() const                             {
      return is_immediate()? inv_simm(long_at(0), offset_width) :
                             nativeMovConstReg_at(addr_at(0))->data();
   }
   void  set_offset(intptr_t x) {
     if (is_immediate()) {
       guarantee(fits_in_simm(x, offset_width), "data block offset overflow");
       set_long_at(0, set_simm(long_at(0), x, offset_width));
     } else
       nativeMovConstReg_at(addr_at(0))->set_data(x);
   }
   void  add_offset_in_bytes(intptr_t radd_offset)     {
       set_offset (offset() + radd_offset);
   }
   void  copy_instruction_to(address new_instruction_address);
   void verify();
   void print ();
   // unit test stuff
   static void test();
  private:
   friend inline NativeMovRegMem* nativeMovRegMem_at (address address) {
     NativeMovRegMem* test = (NativeMovRegMem*)address;
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
 };
 // An interface for accessing/manipulating native memory ops
 //      ld* [reg + offset], reg
 //      st* reg, [reg + offset]
 //      sethi %hi(imm), reg; nop; add reg, %lo(imm), reg; ld* [reg1 + reg], reg2
 //      sethi %hi(imm), reg; nop; add reg, %lo(imm), reg; st* reg2, [reg1 + reg]
 // Ops covered: {lds,ldu,st}{w,b,h}, {ld,st}{d,x}
 //
 // Note that it is identical to NativeMovRegMem with the exception of a nop between the
 // sethi and the add.  The nop is required to be in the delay slot of the call instruction
 // which overwrites the sethi during patching.
 class NativeMovRegMemPatching;
 inline NativeMovRegMemPatching* nativeMovRegMemPatching_at (address address);
 class NativeMovRegMemPatching: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     op3_mask_ld = 1 << Assembler::lduw_op3 |
 << Assembler::ldub_op3 |
 << Assembler::lduh_op3 |
 << Assembler::ldd_op3 |
 << Assembler::ldsw_op3 |
 << Assembler::ldsb_op3 |
 << Assembler::ldsh_op3 |
 << Assembler::ldx_op3,
     op3_mask_st = 1 << Assembler::stw_op3 |
 << Assembler::stb_op3 |
 << Assembler::sth_op3 |
 << Assembler::std_op3 |
 << Assembler::stx_op3,
     op3_ldst_int_limit = Assembler::ldf_op3,
     op3_mask_ldf = 1 << (Assembler::ldf_op3  - op3_ldst_int_limit) |
 << (Assembler::lddf_op3 - op3_ldst_int_limit),
     op3_mask_stf = 1 << (Assembler::stf_op3  - op3_ldst_int_limit) |
 << (Assembler::stdf_op3 - op3_ldst_int_limit),
     offset_width    = 13,
     sethi_offset    = 0,
 #ifdef _LP64
     nop_offset      = 7 * BytesPerInstWord,
 #else
     nop_offset      = 4,
 #endif
     add_offset      = nop_offset + BytesPerInstWord,
     ldst_offset     = add_offset + BytesPerInstWord
   };
   bool is_immediate() const {
     // check if instruction is ld* [reg + offset], reg or st* reg, [reg + offset]
     int i0 = long_at(0);
     return (is_op(i0, Assembler::ldst_op));
   }
   address instruction_address() const           { return addr_at(0); }
   address next_instruction_address() const      {
     return addr_at(is_immediate()? 4 : 16);
   }
   int   offset() const                          {
      return is_immediate()? inv_simm(long_at(0), offset_width) :
                             nativeMovConstRegPatching_at(addr_at(0))->data();
   }
   void  set_offset(int x) {
     if (is_immediate()) {
       guarantee(fits_in_simm(x, offset_width), "data block offset overflow");
       set_long_at(0, set_simm(long_at(0), x, offset_width));
     }
     else
       nativeMovConstRegPatching_at(addr_at(0))->set_data(x);
   }
   void  add_offset_in_bytes(intptr_t radd_offset)     {
       set_offset (offset() + radd_offset);
   }
   void  copy_instruction_to(address new_instruction_address);
   void verify();
   void print ();
   // unit test stuff
   static void test();
  private:
   friend inline NativeMovRegMemPatching* nativeMovRegMemPatching_at (address address) {
     NativeMovRegMemPatching* test = (NativeMovRegMemPatching*)address;
     #ifdef ASSERT
       test->verify();
     #endif
     return test;
   }
 };
 // An interface for accessing/manipulating native jumps
 //      jump_to addr
 //      == sethi %hi22(addr), temp ;  jumpl reg, %lo10(addr), G0 ;  <delay>
 //      jumpl_to addr, lreg
 //      == sethi %hi22(addr), temp ;  jumpl reg, %lo10(addr), lreg ;  <delay>
 class NativeJump;
 inline NativeJump* nativeJump_at(address address);
 class NativeJump: public NativeInstruction {
  private:
   void guarantee_displacement(int disp, int width) {
     guarantee(fits_in_simm(disp, width + 2), "branch displacement overflow");
   }
  public:
   enum Sparc_specific_constants {
     sethi_offset           = 0,
 #ifdef _LP64
     jmpl_offset            = 7 * BytesPerInstWord,
     instruction_size       = 9 * BytesPerInstWord  // includes delay slot
 #else
     jmpl_offset            = 1 * BytesPerInstWord,
     instruction_size       = 3 * BytesPerInstWord  // includes delay slot
 #endif
   };
   address instruction_address() const       { return addr_at(0); }
   address next_instruction_address() const  { return addr_at(instruction_size); }
 #ifdef _LP64
   address jump_destination() const {
     return (address) data64(instruction_address(), long_at(jmpl_offset));
   }
   void set_jump_destination(address dest) {
     set_data64_sethi( instruction_address(), (intptr_t)dest);
     set_long_at(jmpl_offset,  set_data32_simm13( long_at(jmpl_offset),  (intptr_t)dest));
   }
 #else
   address jump_destination() const {
     return (address) data32(long_at(sethi_offset), long_at(jmpl_offset));
   }
   void set_jump_destination(address dest) {
     set_long_at(sethi_offset, set_data32_sethi(  long_at(sethi_offset), (intptr_t)dest));
     set_long_at(jmpl_offset,  set_data32_simm13( long_at(jmpl_offset),  (intptr_t)dest));
   }
 #endif
   // Creation
   friend inline NativeJump* nativeJump_at(address address) {
     NativeJump* jump = (NativeJump*)address;
     #ifdef ASSERT
       jump->verify();
     #endif
     return jump;
   }
   void verify();
   void print();
   // Unit testing stuff
   static void test();
   // Insertion of native jump instruction
   static void insert(address code_pos, address entry);
   // MT-safe insertion of native jump at verified method entry
   static void check_verified_entry_alignment(address entry, address verified_entry) {
     // nothing to do for sparc.
   }
   static void patch_verified_entry(address entry, address verified_entry, address dest);
 };
 // Despite the name, handles only simple branches.
 class NativeGeneralJump;
 inline NativeGeneralJump* nativeGeneralJump_at(address address);
 class NativeGeneralJump: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     instruction_size                   = 8
   };
   address instruction_address() const       { return addr_at(0); }
   address jump_destination()    const       { return addr_at(0) + branch_destination_offset(long_at(0)); }
   void set_jump_destination(address dest) {
     int patched_instr = patch_branch_destination_offset(dest - addr_at(0), long_at(0));
     set_long_at(0, patched_instr);
   }
   void set_annul() { set_annul_bit(); }
   NativeInstruction *delay_slot_instr() { return nativeInstruction_at(addr_at(4));}
   void fill_delay_slot(int instr) { set_long_at(4, instr);}
   Assembler::Condition condition() {
     int x = long_at(0);
     return (Assembler::Condition) Assembler::inv_cond(x);
   }
   // Creation
   friend inline NativeGeneralJump* nativeGeneralJump_at(address address) {
     NativeGeneralJump* jump = (NativeGeneralJump*)(address);
 #ifdef ASSERT
       jump->verify();
 #endif
     return jump;
   }
   // Insertion of native general jump instruction
   static void insert_unconditional(address code_pos, address entry);
   static void replace_mt_safe(address instr_addr, address code_buffer);
   void verify();
 };
 class NativeIllegalInstruction: public NativeInstruction {
  public:
   enum Sparc_specific_constants {
     instruction_size            =    4
   };
   // Insert illegal opcode as specific address
   static void insert(address code_pos);
 };

Mercurial > jdk8-mips64-public > hotspot / annotate

src/cpu/sparc/vm/nativeInst_sparc.hpp@d5fc211aea19 (annotated)

src/cpu/sparc/vm/nativeInst_sparc.hpp