jdk8-mips64-public/hotspot: src/cpu/sparc/vm/templateInterpreter

src/cpu/sparc/vm/templateInterpreter_sparc.cpp@3dc12ef8735e (annotated)

src/cpu/sparc/vm/templateInterpreter_sparc.cpp

Thu, 07 Oct 2010 15:12:57 -0400

author: bobv
date: Thu, 07 Oct 2010 15:12:57 -0400
changeset 2223: 3dc12ef8735e
parent 2138: d5d065957597
child 2314: f95d63e2154a
permissions: -rw-r--r--

6989297: Integrate additional portability improvements
Reviewed-by: vladidan, dholmes

 /*
  * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
  *
  * This code is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 only, as
  * published by the Free Software Foundation.
  *
  * This code is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * version 2 for more details (a copy is included in the LICENSE file that
  * accompanied this code).
  *
  * You should have received a copy of the GNU General Public License version
  * 2 along with this work; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  *
  * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
  * or visit www.oracle.com if you need additional information or have any
  * questions.
  *
  */
 #include "incls/_precompiled.incl"
 #include "incls/_templateInterpreter_sparc.cpp.incl"
 #ifndef CC_INTERP
 #ifndef FAST_DISPATCH
 #define FAST_DISPATCH 1
 #endif
 #undef FAST_DISPATCH
 // Generation of Interpreter
 //
 // The InterpreterGenerator generates the interpreter into Interpreter::_code.
 #define __ _masm->
 //----------------------------------------------------------------------------------------------------
 void InterpreterGenerator::save_native_result(void) {
   // result potentially in O0/O1: save it across calls
   const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
   // result potentially in F0/F1: save it across calls
   const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
   // save and restore any potential method result value around the unlocking operation
   __ stf(FloatRegisterImpl::D, F0, d_tmp);
 #ifdef _LP64
   __ stx(O0, l_tmp);
 #else
   __ std(O0, l_tmp);
 #endif
 }
 void InterpreterGenerator::restore_native_result(void) {
   const Address& l_tmp = InterpreterMacroAssembler::l_tmp;
   const Address& d_tmp = InterpreterMacroAssembler::d_tmp;
   // Restore any method result value
   __ ldf(FloatRegisterImpl::D, d_tmp, F0);
 #ifdef _LP64
   __ ldx(l_tmp, O0);
 #else
   __ ldd(l_tmp, O0);
 #endif
 }
 address TemplateInterpreterGenerator::generate_exception_handler_common(const char* name, const char* message, bool pass_oop) {
   assert(!pass_oop || message == NULL, "either oop or message but not both");
   address entry = __ pc();
   // expression stack must be empty before entering the VM if an exception happened
   __ empty_expression_stack();
   // load exception object
   __ set((intptr_t)name, G3_scratch);
   if (pass_oop) {
     __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_klass_exception), G3_scratch, Otos_i);
   } else {
     __ set((intptr_t)message, G4_scratch);
     __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), G3_scratch, G4_scratch);
   }
   // throw exception
   assert(Interpreter::throw_exception_entry() != NULL, "generate it first");
   AddressLiteral thrower(Interpreter::throw_exception_entry());
   __ jump_to(thrower, G3_scratch);
   __ delayed()->nop();
   return entry;
 }
 address TemplateInterpreterGenerator::generate_ClassCastException_handler() {
   address entry = __ pc();
   // expression stack must be empty before entering the VM if an exception
   // happened
   __ empty_expression_stack();
   // load exception object
   __ call_VM(Oexception,
              CAST_FROM_FN_PTR(address,
                               InterpreterRuntime::throw_ClassCastException),
              Otos_i);
   __ should_not_reach_here();
   return entry;
 }
 // Arguments are: required type in G5_method_type, and
 // failing object (or NULL) in G3_method_handle.
 address TemplateInterpreterGenerator::generate_WrongMethodType_handler() {
   address entry = __ pc();
   // expression stack must be empty before entering the VM if an exception
   // happened
   __ empty_expression_stack();
   // load exception object
   __ call_VM(Oexception,
              CAST_FROM_FN_PTR(address,
                               InterpreterRuntime::throw_WrongMethodTypeException),
              G5_method_type,    // required
              G3_method_handle); // actual
   __ should_not_reach_here();
   return entry;
 }
 address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler(const char* name) {
   address entry = __ pc();
   // expression stack must be empty before entering the VM if an exception happened
   __ empty_expression_stack();
   // convention: expect aberrant index in register G3_scratch, then shuffle the
   // index to G4_scratch for the VM call
   __ mov(G3_scratch, G4_scratch);
   __ set((intptr_t)name, G3_scratch);
   __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_ArrayIndexOutOfBoundsException), G3_scratch, G4_scratch);
   __ should_not_reach_here();
   return entry;
 }
 address TemplateInterpreterGenerator::generate_StackOverflowError_handler() {
   address entry = __ pc();
   // expression stack must be empty before entering the VM if an exception happened
   __ empty_expression_stack();
   __ call_VM(Oexception, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
   __ should_not_reach_here();
   return entry;
 }
 address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step) {
   TosState incoming_state = state;
   Label cont;
   address compiled_entry = __ pc();
   address entry = __ pc();
 #if !defined(_LP64) && defined(COMPILER2)
   // All return values are where we want them, except for Longs.  C2 returns
   // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1.
   // Since the interpreter will return longs in G1 and O0/O1 in the 32bit
   // build even if we are returning from interpreted we just do a little
   // stupid shuffing.
   // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to
   // do this here. Unfortunately if we did a rethrow we'd see an machepilog node
   // first which would move g1 -> O0/O1 and destroy the exception we were throwing.
   if (incoming_state == ltos) {
     __ srl (G1,  0, O1);
     __ srlx(G1, 32, O0);
   }
 #endif // !_LP64 && COMPILER2
   __ bind(cont);
   // The callee returns with the stack possibly adjusted by adapter transition
   // We remove that possible adjustment here.
   // All interpreter local registers are untouched. Any result is passed back
   // in the O0/O1 or float registers. Before continuing, the arguments must be
   // popped from the java expression stack; i.e., Lesp must be adjusted.
   __ mov(Llast_SP, SP);   // Remove any adapter added stack space.
   Label L_got_cache, L_giant_index;
   const Register cache = G3_scratch;
   const Register size  = G1_scratch;
   if (EnableInvokeDynamic) {
     __ ldub(Address(Lbcp, 0), G1_scratch);  // Load current bytecode.
     __ cmp(G1_scratch, Bytecodes::_invokedynamic);
     __ br(Assembler::equal, false, Assembler::pn, L_giant_index);
     __ delayed()->nop();
   }
   __ get_cache_and_index_at_bcp(cache, G1_scratch, 1);
   __ bind(L_got_cache);
   __ ld_ptr(cache, constantPoolCacheOopDesc::base_offset() +
                    ConstantPoolCacheEntry::flags_offset(), size);
   __ and3(size, 0xFF, size);                   // argument size in words
   __ sll(size, Interpreter::logStackElementSize, size); // each argument size in bytes
   __ add(Lesp, size, Lesp);                    // pop arguments
   __ dispatch_next(state, step);
   // out of the main line of code...
   if (EnableInvokeDynamic) {
     __ bind(L_giant_index);
     __ get_cache_and_index_at_bcp(cache, G1_scratch, 1, sizeof(u4));
     __ ba(false, L_got_cache);
     __ delayed()->nop();
   }
   return entry;
 }
 address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, int step) {
   address entry = __ pc();
   __ get_constant_pool_cache(LcpoolCache); // load LcpoolCache
   { Label L;
     Address exception_addr(G2_thread, Thread::pending_exception_offset());
     __ ld_ptr(exception_addr, Gtemp);  // Load pending exception.
     __ tst(Gtemp);
     __ brx(Assembler::equal, false, Assembler::pt, L);
     __ delayed()->nop();
     __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
     __ should_not_reach_here();
     __ bind(L);
   }
   __ dispatch_next(state, step);
   return entry;
 }
 // A result handler converts/unboxes a native call result into
 // a java interpreter/compiler result. The current frame is an
 // interpreter frame. The activation frame unwind code must be
 // consistent with that of TemplateTable::_return(...). In the
 // case of native methods, the caller's SP was not modified.
 address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) {
   address entry = __ pc();
   Register Itos_i  = Otos_i ->after_save();
   Register Itos_l  = Otos_l ->after_save();
   Register Itos_l1 = Otos_l1->after_save();
   Register Itos_l2 = Otos_l2->after_save();
   switch (type) {
     case T_BOOLEAN: __ subcc(G0, O0, G0); __ addc(G0, 0, Itos_i); break; // !0 => true; 0 => false
     case T_CHAR   : __ sll(O0, 16, O0); __ srl(O0, 16, Itos_i);   break; // cannot use and3, 0xFFFF too big as immediate value!
     case T_BYTE   : __ sll(O0, 24, O0); __ sra(O0, 24, Itos_i);   break;
     case T_SHORT  : __ sll(O0, 16, O0); __ sra(O0, 16, Itos_i);   break;
     case T_LONG   :
 #ifndef _LP64
                     __ mov(O1, Itos_l2);  // move other half of long
 #endif              // ifdef or no ifdef, fall through to the T_INT case
     case T_INT    : __ mov(O0, Itos_i);                         break;
     case T_VOID   : /* nothing to do */                         break;
     case T_FLOAT  : assert(F0 == Ftos_f, "fix this code" );     break;
     case T_DOUBLE : assert(F0 == Ftos_d, "fix this code" );     break;
     case T_OBJECT :
       __ ld_ptr(FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS, Itos_i);
       __ verify_oop(Itos_i);
       break;
     default       : ShouldNotReachHere();
   }
   __ ret();                           // return from interpreter activation
   __ delayed()->restore(I5_savedSP, G0, SP);  // remove interpreter frame
   NOT_PRODUCT(__ emit_long(0);)       // marker for disassembly
   return entry;
 }
 address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, address runtime_entry) {
   address entry = __ pc();
   __ push(state);
   __ call_VM(noreg, runtime_entry);
   __ dispatch_via(vtos, Interpreter::normal_table(vtos));
   return entry;
 }
 address TemplateInterpreterGenerator::generate_continuation_for(TosState state) {
   address entry = __ pc();
   __ dispatch_next(state);
   return entry;
 }
 //
 // Helpers for commoning out cases in the various type of method entries.
 //
 // increment invocation count & check for overflow
 //
 // Note: checking for negative value instead of overflow
 //       so we have a 'sticky' overflow test
 //
 // Lmethod: method
 // ??: invocation counter
 //
 void InterpreterGenerator::generate_counter_incr(Label* overflow, Label* profile_method, Label* profile_method_continue) {
   // Note: In tiered we increment either counters in methodOop or in MDO depending if we're profiling or not.
   if (TieredCompilation) {
     const int increment = InvocationCounter::count_increment;
     const int mask = ((1 << Tier0InvokeNotifyFreqLog) - 1) << InvocationCounter::count_shift;
     Label no_mdo, done;
     if (ProfileInterpreter) {
       // If no method data exists, go to profile_continue.
       __ ld_ptr(Lmethod, methodOopDesc::method_data_offset(), G4_scratch);
       __ br_null(G4_scratch, false, Assembler::pn, no_mdo);
       __ delayed()->nop();
       // Increment counter
       Address mdo_invocation_counter(G4_scratch,
                                      in_bytes(methodDataOopDesc::invocation_counter_offset()) +
                                      in_bytes(InvocationCounter::counter_offset()));
       __ increment_mask_and_jump(mdo_invocation_counter, increment, mask,
                                  G3_scratch, Lscratch,
                                  Assembler::zero, overflow);
       __ ba(false, done);
       __ delayed()->nop();
     }
     // Increment counter in methodOop
     __ bind(no_mdo);
     Address invocation_counter(Lmethod,
                                in_bytes(methodOopDesc::invocation_counter_offset()) +
                                in_bytes(InvocationCounter::counter_offset()));
     __ increment_mask_and_jump(invocation_counter, increment, mask,
                                G3_scratch, Lscratch,
                                Assembler::zero, overflow);
     __ bind(done);
   } else {
     // Update standard invocation counters
     __ increment_invocation_counter(O0, G3_scratch);
     if (ProfileInterpreter) {  // %%% Merge this into methodDataOop
       Address interpreter_invocation_counter(Lmethod,in_bytes(methodOopDesc::interpreter_invocation_counter_offset()));
       __ ld(interpreter_invocation_counter, G3_scratch);
       __ inc(G3_scratch);
       __ st(G3_scratch, interpreter_invocation_counter);
     }
     if (ProfileInterpreter && profile_method != NULL) {
       // Test to see if we should create a method data oop
       AddressLiteral profile_limit((address)&InvocationCounter::InterpreterProfileLimit);
       __ load_contents(profile_limit, G3_scratch);
       __ cmp(O0, G3_scratch);
       __ br(Assembler::lessUnsigned, false, Assembler::pn, *profile_method_continue);
       __ delayed()->nop();
       // if no method data exists, go to profile_method
       __ test_method_data_pointer(*profile_method);
     }
     AddressLiteral invocation_limit((address)&InvocationCounter::InterpreterInvocationLimit);
     __ load_contents(invocation_limit, G3_scratch);
     __ cmp(O0, G3_scratch);
     __ br(Assembler::greaterEqualUnsigned, false, Assembler::pn, *overflow);
     __ delayed()->nop();
   }
 }
 // Allocate monitor and lock method (asm interpreter)
 // ebx - methodOop
 //
 void InterpreterGenerator::lock_method(void) {
   __ ld(Lmethod, in_bytes(methodOopDesc::access_flags_offset()), O0);  // Load access flags.
 #ifdef ASSERT
  { Label ok;
    __ btst(JVM_ACC_SYNCHRONIZED, O0);
    __ br( Assembler::notZero, false, Assembler::pt, ok);
    __ delayed()->nop();
    __ stop("method doesn't need synchronization");
    __ bind(ok);
   }
 #endif // ASSERT
   // get synchronization object to O0
   { Label done;
     const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
     __ btst(JVM_ACC_STATIC, O0);
     __ br( Assembler::zero, true, Assembler::pt, done);
     __ delayed()->ld_ptr(Llocals, Interpreter::local_offset_in_bytes(0), O0); // get receiver for not-static case
     __ ld_ptr( Lmethod, in_bytes(methodOopDesc::constants_offset()), O0);
     __ ld_ptr( O0, constantPoolOopDesc::pool_holder_offset_in_bytes(), O0);
     // lock the mirror, not the klassOop
     __ ld_ptr( O0, mirror_offset, O0);
 #ifdef ASSERT
     __ tst(O0);
     __ breakpoint_trap(Assembler::zero);
 #endif // ASSERT
     __ bind(done);
   }
   __ add_monitor_to_stack(true, noreg, noreg);  // allocate monitor elem
   __ st_ptr( O0, Lmonitors, BasicObjectLock::obj_offset_in_bytes());   // store object
   // __ untested("lock_object from method entry");
   __ lock_object(Lmonitors, O0);
 }
 void TemplateInterpreterGenerator::generate_stack_overflow_check(Register Rframe_size,
                                                          Register Rscratch,
                                                          Register Rscratch2) {
   const int page_size = os::vm_page_size();
   Address saved_exception_pc(G2_thread, JavaThread::saved_exception_pc_offset());
   Label after_frame_check;
   assert_different_registers(Rframe_size, Rscratch, Rscratch2);
   __ set( page_size,   Rscratch );
   __ cmp( Rframe_size, Rscratch );
   __ br( Assembler::lessEqual, false, Assembler::pt, after_frame_check );
   __ delayed()->nop();
   // get the stack base, and in debug, verify it is non-zero
   __ ld_ptr( G2_thread, Thread::stack_base_offset(), Rscratch );
 #ifdef ASSERT
   Label base_not_zero;
   __ cmp( Rscratch, G0 );
   __ brx( Assembler::notEqual, false, Assembler::pn, base_not_zero );
   __ delayed()->nop();
   __ stop("stack base is zero in generate_stack_overflow_check");
   __ bind(base_not_zero);
 #endif
   // get the stack size, and in debug, verify it is non-zero
   assert( sizeof(size_t) == sizeof(intptr_t), "wrong load size" );
   __ ld_ptr( G2_thread, Thread::stack_size_offset(), Rscratch2 );
 #ifdef ASSERT
   Label size_not_zero;
   __ cmp( Rscratch2, G0 );
   __ brx( Assembler::notEqual, false, Assembler::pn, size_not_zero );
   __ delayed()->nop();
   __ stop("stack size is zero in generate_stack_overflow_check");
   __ bind(size_not_zero);
 #endif
   // compute the beginning of the protected zone minus the requested frame size
   __ sub( Rscratch, Rscratch2,   Rscratch );
   __ set( (StackRedPages+StackYellowPages) * page_size, Rscratch2 );
   __ add( Rscratch, Rscratch2,   Rscratch );
   // Add in the size of the frame (which is the same as subtracting it from the
   // SP, which would take another register
   __ add( Rscratch, Rframe_size, Rscratch );
   // the frame is greater than one page in size, so check against
   // the bottom of the stack
   __ cmp( SP, Rscratch );
   __ brx( Assembler::greater, false, Assembler::pt, after_frame_check );
   __ delayed()->nop();
   // Save the return address as the exception pc
   __ st_ptr(O7, saved_exception_pc);
   // the stack will overflow, throw an exception
   __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError));
   // if you get to here, then there is enough stack space
   __ bind( after_frame_check );
 }
 //
 // Generate a fixed interpreter frame. This is identical setup for interpreted
 // methods and for native methods hence the shared code.
 void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) {
   //
   //
   // The entry code sets up a new interpreter frame in 4 steps:
   //
   // 1) Increase caller's SP by for the extra local space needed:
   //    (check for overflow)
   //    Efficient implementation of xload/xstore bytecodes requires
   //    that arguments and non-argument locals are in a contigously
   //    addressable memory block => non-argument locals must be
   //    allocated in the caller's frame.
   //
   // 2) Create a new stack frame and register window:
   //    The new stack frame must provide space for the standard
   //    register save area, the maximum java expression stack size,
   //    the monitor slots (0 slots initially), and some frame local
   //    scratch locations.
   //
   // 3) The following interpreter activation registers must be setup:
   //    Lesp       : expression stack pointer
   //    Lbcp       : bytecode pointer
   //    Lmethod    : method
   //    Llocals    : locals pointer
   //    Lmonitors  : monitor pointer
   //    LcpoolCache: constant pool cache
   //
   // 4) Initialize the non-argument locals if necessary:
   //    Non-argument locals may need to be initialized to NULL
   //    for GC to work. If the oop-map information is accurate
   //    (in the absence of the JSR problem), no initialization
   //    is necessary.
   //
   // (gri - 2/25/2000)
   const Address size_of_parameters(G5_method, methodOopDesc::size_of_parameters_offset());
   const Address size_of_locals    (G5_method, methodOopDesc::size_of_locals_offset());
   const Address max_stack         (G5_method, methodOopDesc::max_stack_offset());
   int rounded_vm_local_words = round_to( frame::interpreter_frame_vm_local_words, WordsPerLong );
   const int extra_space =
     rounded_vm_local_words +                   // frame local scratch space
     //6815692//methodOopDesc::extra_stack_words() +       // extra push slots for MH adapters
     frame::memory_parameter_word_sp_offset +   // register save area
     (native_call ? frame::interpreter_frame_extra_outgoing_argument_words : 0);
   const Register Glocals_size = G3;
   const Register Otmp1 = O3;
   const Register Otmp2 = O4;
   // Lscratch can't be used as a temporary because the call_stub uses
   // it to assert that the stack frame was setup correctly.
   __ lduh( size_of_parameters, Glocals_size);
   // Gargs points to first local + BytesPerWord
   // Set the saved SP after the register window save
   //
   assert_different_registers(Gargs, Glocals_size, Gframe_size, O5_savedSP);
   __ sll(Glocals_size, Interpreter::logStackElementSize, Otmp1);
   __ add(Gargs, Otmp1, Gargs);
   if (native_call) {
     __ calc_mem_param_words( Glocals_size, Gframe_size );
     __ add( Gframe_size,  extra_space, Gframe_size);
     __ round_to( Gframe_size, WordsPerLong );
     __ sll( Gframe_size, LogBytesPerWord, Gframe_size );
   } else {
     //
     // Compute number of locals in method apart from incoming parameters
     //
     __ lduh( size_of_locals, Otmp1 );
     __ sub( Otmp1, Glocals_size, Glocals_size );
     __ round_to( Glocals_size, WordsPerLong );
     __ sll( Glocals_size, Interpreter::logStackElementSize, Glocals_size );
     // see if the frame is greater than one page in size. If so,
     // then we need to verify there is enough stack space remaining
     // Frame_size = (max_stack + extra_space) * BytesPerWord;
     __ lduh( max_stack, Gframe_size );
     __ add( Gframe_size, extra_space, Gframe_size );
     __ round_to( Gframe_size, WordsPerLong );
     __ sll( Gframe_size, Interpreter::logStackElementSize, Gframe_size);
     // Add in java locals size for stack overflow check only
     __ add( Gframe_size, Glocals_size, Gframe_size );
     const Register Otmp2 = O4;
     assert_different_registers(Otmp1, Otmp2, O5_savedSP);
     generate_stack_overflow_check(Gframe_size, Otmp1, Otmp2);
     __ sub( Gframe_size, Glocals_size, Gframe_size);
     //
     // bump SP to accomodate the extra locals
     //
     __ sub( SP, Glocals_size, SP );
   }
   //
   // now set up a stack frame with the size computed above
   //
   __ neg( Gframe_size );
   __ save( SP, Gframe_size, SP );
   //
   // now set up all the local cache registers
   //
   // NOTE: At this point, Lbyte_code/Lscratch has been modified. Note
   // that all present references to Lbyte_code initialize the register
   // immediately before use
   if (native_call) {
     __ mov(G0, Lbcp);
   } else {
     __ ld_ptr(G5_method, methodOopDesc::const_offset(), Lbcp);
     __ add(Lbcp, in_bytes(constMethodOopDesc::codes_offset()), Lbcp);
   }
   __ mov( G5_method, Lmethod);                 // set Lmethod
   __ get_constant_pool_cache( LcpoolCache );   // set LcpoolCache
   __ sub(FP, rounded_vm_local_words * BytesPerWord, Lmonitors ); // set Lmonitors
 #ifdef _LP64
   __ add( Lmonitors, STACK_BIAS, Lmonitors );   // Account for 64 bit stack bias
 #endif
   __ sub(Lmonitors, BytesPerWord, Lesp);       // set Lesp
   // setup interpreter activation registers
   __ sub(Gargs, BytesPerWord, Llocals);        // set Llocals
   if (ProfileInterpreter) {
 #ifdef FAST_DISPATCH
     // FAST_DISPATCH and ProfileInterpreter are mutually exclusive since
     // they both use I2.
     assert(0, "FAST_DISPATCH and +ProfileInterpreter are mutually exclusive");
 #endif // FAST_DISPATCH
     __ set_method_data_pointer();
   }
 }
 // Empty method, generate a very fast return.
 address InterpreterGenerator::generate_empty_entry(void) {
   // A method that does nother but return...
   address entry = __ pc();
   Label slow_path;
   __ verify_oop(G5_method);
   // do nothing for empty methods (do not even increment invocation counter)
   if ( UseFastEmptyMethods) {
     // If we need a safepoint check, generate full interpreter entry.
     AddressLiteral sync_state(SafepointSynchronize::address_of_state());
     __ set(sync_state, G3_scratch);
     __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
     __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
     __ delayed()->nop();
     // Code: _return
     __ retl();
     __ delayed()->mov(O5_savedSP, SP);
     __ bind(slow_path);
     (void) generate_normal_entry(false);
     return entry;
   }
   return NULL;
 }
 // Call an accessor method (assuming it is resolved, otherwise drop into
 // vanilla (slow path) entry
 // Generates code to elide accessor methods
 // Uses G3_scratch and G1_scratch as scratch
 address InterpreterGenerator::generate_accessor_entry(void) {
   // Code: _aload_0, _(i|a)getfield, _(i|a)return or any rewrites thereof;
   // parameter size = 1
   // Note: We can only use this code if the getfield has been resolved
   //       and if we don't have a null-pointer exception => check for
   //       these conditions first and use slow path if necessary.
   address entry = __ pc();
   Label slow_path;
   // XXX: for compressed oops pointer loading and decoding doesn't fit in
   // delay slot and damages G1
   if ( UseFastAccessorMethods && !UseCompressedOops ) {
     // Check if we need to reach a safepoint and generate full interpreter
     // frame if so.
     AddressLiteral sync_state(SafepointSynchronize::address_of_state());
     __ load_contents(sync_state, G3_scratch);
     __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
     __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
     __ delayed()->nop();
     // Check if local 0 != NULL
     __ ld_ptr(Gargs, G0, Otos_i ); // get local 0
     __ tst(Otos_i);  // check if local 0 == NULL and go the slow path
     __ brx(Assembler::zero, false, Assembler::pn, slow_path);
     __ delayed()->nop();
     // read first instruction word and extract bytecode @ 1 and index @ 2
     // get first 4 bytes of the bytecodes (big endian!)
     __ ld_ptr(G5_method, methodOopDesc::const_offset(), G1_scratch);
     __ ld(G1_scratch, constMethodOopDesc::codes_offset(), G1_scratch);
     // move index @ 2 far left then to the right most two bytes.
     __ sll(G1_scratch, 2*BitsPerByte, G1_scratch);
     __ srl(G1_scratch, 2*BitsPerByte - exact_log2(in_words(
                       ConstantPoolCacheEntry::size()) * BytesPerWord), G1_scratch);
     // get constant pool cache
     __ ld_ptr(G5_method, methodOopDesc::constants_offset(), G3_scratch);
     __ ld_ptr(G3_scratch, constantPoolOopDesc::cache_offset_in_bytes(), G3_scratch);
     // get specific constant pool cache entry
     __ add(G3_scratch, G1_scratch, G3_scratch);
     // Check the constant Pool cache entry to see if it has been resolved.
     // If not, need the slow path.
     ByteSize cp_base_offset = constantPoolCacheOopDesc::base_offset();
     __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::indices_offset(), G1_scratch);
     __ srl(G1_scratch, 2*BitsPerByte, G1_scratch);
     __ and3(G1_scratch, 0xFF, G1_scratch);
     __ cmp(G1_scratch, Bytecodes::_getfield);
     __ br(Assembler::notEqual, false, Assembler::pn, slow_path);
     __ delayed()->nop();
     // Get the type and return field offset from the constant pool cache
     __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::flags_offset(), G1_scratch);
     __ ld_ptr(G3_scratch, cp_base_offset + ConstantPoolCacheEntry::f2_offset(), G3_scratch);
     Label xreturn_path;
     // Need to differentiate between igetfield, agetfield, bgetfield etc.
     // because they are different sizes.
     // Get the type from the constant pool cache
     __ srl(G1_scratch, ConstantPoolCacheEntry::tosBits, G1_scratch);
     // Make sure we don't need to mask G1_scratch for tosBits after the above shift
     ConstantPoolCacheEntry::verify_tosBits();
     __ cmp(G1_scratch, atos );
     __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
     __ delayed()->ld_ptr(Otos_i, G3_scratch, Otos_i);
     __ cmp(G1_scratch, itos);
     __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
     __ delayed()->ld(Otos_i, G3_scratch, Otos_i);
     __ cmp(G1_scratch, stos);
     __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
     __ delayed()->ldsh(Otos_i, G3_scratch, Otos_i);
     __ cmp(G1_scratch, ctos);
     __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
     __ delayed()->lduh(Otos_i, G3_scratch, Otos_i);
 #ifdef ASSERT
     __ cmp(G1_scratch, btos);
     __ br(Assembler::equal, true, Assembler::pt, xreturn_path);
     __ delayed()->ldsb(Otos_i, G3_scratch, Otos_i);
     __ should_not_reach_here();
 #endif
     __ ldsb(Otos_i, G3_scratch, Otos_i);
     __ bind(xreturn_path);
     // _ireturn/_areturn
     __ retl();                      // return from leaf routine
     __ delayed()->mov(O5_savedSP, SP);
     // Generate regular method entry
     __ bind(slow_path);
     (void) generate_normal_entry(false);
     return entry;
   }
   return NULL;
 }
 //
 // Interpreter stub for calling a native method. (asm interpreter)
 // This sets up a somewhat different looking stack for calling the native method
 // than the typical interpreter frame setup.
 //
 address InterpreterGenerator::generate_native_entry(bool synchronized) {
   address entry = __ pc();
   // the following temporary registers are used during frame creation
   const Register Gtmp1 = G3_scratch ;
   const Register Gtmp2 = G1_scratch;
   bool inc_counter  = UseCompiler || CountCompiledCalls;
   // make sure registers are different!
   assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
   const Address Laccess_flags(Lmethod, methodOopDesc::access_flags_offset());
   __ verify_oop(G5_method);
   const Register Glocals_size = G3;
   assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
   // make sure method is native & not abstract
   // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
 #ifdef ASSERT
   __ ld(G5_method, methodOopDesc::access_flags_offset(), Gtmp1);
   {
     Label L;
     __ btst(JVM_ACC_NATIVE, Gtmp1);
     __ br(Assembler::notZero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("tried to execute non-native method as native");
     __ bind(L);
   }
   { Label L;
     __ btst(JVM_ACC_ABSTRACT, Gtmp1);
     __ br(Assembler::zero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("tried to execute abstract method as non-abstract");
     __ bind(L);
   }
 #endif // ASSERT
  // generate the code to allocate the interpreter stack frame
   generate_fixed_frame(true);
   //
   // No locals to initialize for native method
   //
   // this slot will be set later, we initialize it to null here just in
   // case we get a GC before the actual value is stored later
   __ st_ptr(G0, FP, (frame::interpreter_frame_oop_temp_offset * wordSize) + STACK_BIAS);
   const Address do_not_unlock_if_synchronized(G2_thread,
     JavaThread::do_not_unlock_if_synchronized_offset());
   // Since at this point in the method invocation the exception handler
   // would try to exit the monitor of synchronized methods which hasn't
   // been entered yet, we set the thread local variable
   // _do_not_unlock_if_synchronized to true. If any exception was thrown by
   // runtime, exception handling i.e. unlock_if_synchronized_method will
   // check this thread local flag.
   // This flag has two effects, one is to force an unwind in the topmost
   // interpreter frame and not perform an unlock while doing so.
   __ movbool(true, G3_scratch);
   __ stbool(G3_scratch, do_not_unlock_if_synchronized);
   // increment invocation counter and check for overflow
   //
   // Note: checking for negative value instead of overflow
   //       so we have a 'sticky' overflow test (may be of
   //       importance as soon as we have true MT/MP)
   Label invocation_counter_overflow;
   Label Lcontinue;
   if (inc_counter) {
     generate_counter_incr(&invocation_counter_overflow, NULL, NULL);
   }
   __ bind(Lcontinue);
   bang_stack_shadow_pages(true);
   // reset the _do_not_unlock_if_synchronized flag
   __ stbool(G0, do_not_unlock_if_synchronized);
   // check for synchronized methods
   // Must happen AFTER invocation_counter check and stack overflow check,
   // so method is not locked if overflows.
   if (synchronized) {
     lock_method();
   } else {
 #ifdef ASSERT
     { Label ok;
       __ ld(Laccess_flags, O0);
       __ btst(JVM_ACC_SYNCHRONIZED, O0);
       __ br( Assembler::zero, false, Assembler::pt, ok);
       __ delayed()->nop();
       __ stop("method needs synchronization");
       __ bind(ok);
     }
 #endif // ASSERT
   }
   // start execution
   __ verify_thread();
   // JVMTI support
   __ notify_method_entry();
   // native call
   // (note that O0 is never an oop--at most it is a handle)
   // It is important not to smash any handles created by this call,
   // until any oop handle in O0 is dereferenced.
   // (note that the space for outgoing params is preallocated)
   // get signature handler
   { Label L;
     Address signature_handler(Lmethod, methodOopDesc::signature_handler_offset());
     __ ld_ptr(signature_handler, G3_scratch);
     __ tst(G3_scratch);
     __ brx(Assembler::notZero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::prepare_native_call), Lmethod);
     __ ld_ptr(signature_handler, G3_scratch);
     __ bind(L);
   }
   // Push a new frame so that the args will really be stored in
   // Copy a few locals across so the new frame has the variables
   // we need but these values will be dead at the jni call and
   // therefore not gc volatile like the values in the current
   // frame (Lmethod in particular)
   // Flush the method pointer to the register save area
   __ st_ptr(Lmethod, SP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS);
   __ mov(Llocals, O1);
   // calculate where the mirror handle body is allocated in the interpreter frame:
   __ add(FP, (frame::interpreter_frame_oop_temp_offset * wordSize) + STACK_BIAS, O2);
   // Calculate current frame size
   __ sub(SP, FP, O3);         // Calculate negative of current frame size
   __ save(SP, O3, SP);        // Allocate an identical sized frame
   // Note I7 has leftover trash. Slow signature handler will fill it in
   // should we get there. Normal jni call will set reasonable last_Java_pc
   // below (and fix I7 so the stack trace doesn't have a meaningless frame
   // in it).
   // Load interpreter frame's Lmethod into same register here
   __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
   __ mov(I1, Llocals);
   __ mov(I2, Lscratch2);     // save the address of the mirror
   // ONLY Lmethod and Llocals are valid here!
   // call signature handler, It will move the arg properly since Llocals in current frame
   // matches that in outer frame
   __ callr(G3_scratch, 0);
   __ delayed()->nop();
   // Result handler is in Lscratch
   // Reload interpreter frame's Lmethod since slow signature handler may block
   __ ld_ptr(FP, (Lmethod->sp_offset_in_saved_window() * wordSize) + STACK_BIAS, Lmethod);
   { Label not_static;
     __ ld(Laccess_flags, O0);
     __ btst(JVM_ACC_STATIC, O0);
     __ br( Assembler::zero, false, Assembler::pt, not_static);
     // get native function entry point(O0 is a good temp until the very end)
     __ delayed()->ld_ptr(Lmethod, in_bytes(methodOopDesc::native_function_offset()), O0);
     // for static methods insert the mirror argument
     const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
     __ ld_ptr(Lmethod, methodOopDesc:: constants_offset(), O1);
     __ ld_ptr(O1, constantPoolOopDesc::pool_holder_offset_in_bytes(), O1);
     __ ld_ptr(O1, mirror_offset, O1);
 #ifdef ASSERT
     if (!PrintSignatureHandlers)  // do not dirty the output with this
     { Label L;
       __ tst(O1);
       __ brx(Assembler::notZero, false, Assembler::pt, L);
       __ delayed()->nop();
       __ stop("mirror is missing");
       __ bind(L);
     }
 #endif // ASSERT
     __ st_ptr(O1, Lscratch2, 0);
     __ mov(Lscratch2, O1);
     __ bind(not_static);
   }
   // At this point, arguments have been copied off of stack into
   // their JNI positions, which are O1..O5 and SP[68..].
   // Oops are boxed in-place on the stack, with handles copied to arguments.
   // The result handler is in Lscratch.  O0 will shortly hold the JNIEnv*.
 #ifdef ASSERT
   { Label L;
     __ tst(O0);
     __ brx(Assembler::notZero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("native entry point is missing");
     __ bind(L);
   }
 #endif // ASSERT
   //
   // setup the frame anchor
   //
   // The scavenge function only needs to know that the PC of this frame is
   // in the interpreter method entry code, it doesn't need to know the exact
   // PC and hence we can use O7 which points to the return address from the
   // previous call in the code stream (signature handler function)
   //
   // The other trick is we set last_Java_sp to FP instead of the usual SP because
   // we have pushed the extra frame in order to protect the volatile register(s)
   // in that frame when we return from the jni call
   //
   __ set_last_Java_frame(FP, O7);
   __ mov(O7, I7);  // make dummy interpreter frame look like one above,
                    // not meaningless information that'll confuse me.
   // flush the windows now. We don't care about the current (protection) frame
   // only the outer frames
   __ flush_windows();
   // mark windows as flushed
   Address flags(G2_thread, JavaThread::frame_anchor_offset() + JavaFrameAnchor::flags_offset());
   __ set(JavaFrameAnchor::flushed, G3_scratch);
   __ st(G3_scratch, flags);
   // Transition from _thread_in_Java to _thread_in_native. We are already safepoint ready.
   Address thread_state(G2_thread, JavaThread::thread_state_offset());
 #ifdef ASSERT
   { Label L;
     __ ld(thread_state, G3_scratch);
     __ cmp(G3_scratch, _thread_in_Java);
     __ br(Assembler::equal, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("Wrong thread state in native stub");
     __ bind(L);
   }
 #endif // ASSERT
   __ set(_thread_in_native, G3_scratch);
   __ st(G3_scratch, thread_state);
   // Call the jni method, using the delay slot to set the JNIEnv* argument.
   __ save_thread(L7_thread_cache); // save Gthread
   __ callr(O0, 0);
   __ delayed()->
      add(L7_thread_cache, in_bytes(JavaThread::jni_environment_offset()), O0);
   // Back from jni method Lmethod in this frame is DEAD, DEAD, DEAD
   __ restore_thread(L7_thread_cache); // restore G2_thread
   __ reinit_heapbase();
   // must we block?
   // Block, if necessary, before resuming in _thread_in_Java state.
   // In order for GC to work, don't clear the last_Java_sp until after blocking.
   { Label no_block;
     AddressLiteral sync_state(SafepointSynchronize::address_of_state());
     // Switch thread to "native transition" state before reading the synchronization state.
     // This additional state is necessary because reading and testing the synchronization
     // state is not atomic w.r.t. GC, as this scenario demonstrates:
     //     Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted.
     //     VM thread changes sync state to synchronizing and suspends threads for GC.
     //     Thread A is resumed to finish this native method, but doesn't block here since it
     //     didn't see any synchronization is progress, and escapes.
     __ set(_thread_in_native_trans, G3_scratch);
     __ st(G3_scratch, thread_state);
     if(os::is_MP()) {
       if (UseMembar) {
         // Force this write out before the read below
         __ membar(Assembler::StoreLoad);
       } else {
         // Write serialization page so VM thread can do a pseudo remote membar.
         // We use the current thread pointer to calculate a thread specific
         // offset to write to within the page. This minimizes bus traffic
         // due to cache line collision.
         __ serialize_memory(G2_thread, G1_scratch, G3_scratch);
       }
     }
     __ load_contents(sync_state, G3_scratch);
     __ cmp(G3_scratch, SafepointSynchronize::_not_synchronized);
     Label L;
     __ br(Assembler::notEqual, false, Assembler::pn, L);
     __ delayed()->ld(G2_thread, JavaThread::suspend_flags_offset(), G3_scratch);
     __ cmp(G3_scratch, 0);
     __ br(Assembler::equal, false, Assembler::pt, no_block);
     __ delayed()->nop();
     __ bind(L);
     // Block.  Save any potential method result value before the operation and
     // use a leaf call to leave the last_Java_frame setup undisturbed.
     save_native_result();
     __ call_VM_leaf(L7_thread_cache,
                     CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans),
                     G2_thread);
     // Restore any method result value
     restore_native_result();
     __ bind(no_block);
   }
   // Clear the frame anchor now
   __ reset_last_Java_frame();
   // Move the result handler address
   __ mov(Lscratch, G3_scratch);
   // return possible result to the outer frame
 #ifndef __LP64
   __ mov(O0, I0);
   __ restore(O1, G0, O1);
 #else
   __ restore(O0, G0, O0);
 #endif /* __LP64 */
   // Move result handler to expected register
   __ mov(G3_scratch, Lscratch);
   // Back in normal (native) interpreter frame. State is thread_in_native_trans
   // switch to thread_in_Java.
   __ set(_thread_in_Java, G3_scratch);
   __ st(G3_scratch, thread_state);
   // reset handle block
   __ ld_ptr(G2_thread, JavaThread::active_handles_offset(), G3_scratch);
   __ st_ptr(G0, G3_scratch, JNIHandleBlock::top_offset_in_bytes());
   // If we have an oop result store it where it will be safe for any further gc
   // until we return now that we've released the handle it might be protected by
   {
     Label no_oop, store_result;
     __ set((intptr_t)AbstractInterpreter::result_handler(T_OBJECT), G3_scratch);
     __ cmp(G3_scratch, Lscratch);
     __ brx(Assembler::notEqual, false, Assembler::pt, no_oop);
     __ delayed()->nop();
     __ addcc(G0, O0, O0);
     __ brx(Assembler::notZero, true, Assembler::pt, store_result);     // if result is not NULL:
     __ delayed()->ld_ptr(O0, 0, O0);                                   // unbox it
     __ mov(G0, O0);
     __ bind(store_result);
     // Store it where gc will look for it and result handler expects it.
     __ st_ptr(O0, FP, (frame::interpreter_frame_oop_temp_offset*wordSize) + STACK_BIAS);
     __ bind(no_oop);
   }
   // handle exceptions (exception handling will handle unlocking!)
   { Label L;
     Address exception_addr(G2_thread, Thread::pending_exception_offset());
     __ ld_ptr(exception_addr, Gtemp);
     __ tst(Gtemp);
     __ brx(Assembler::equal, false, Assembler::pt, L);
     __ delayed()->nop();
     // Note: This could be handled more efficiently since we know that the native
     //       method doesn't have an exception handler. We could directly return
     //       to the exception handler for the caller.
     __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception));
     __ should_not_reach_here();
     __ bind(L);
   }
   // JVMTI support (preserves thread register)
   __ notify_method_exit(true, ilgl, InterpreterMacroAssembler::NotifyJVMTI);
   if (synchronized) {
     // save and restore any potential method result value around the unlocking operation
     save_native_result();
     __ add( __ top_most_monitor(), O1);
     __ unlock_object(O1);
     restore_native_result();
   }
 #if defined(COMPILER2) && !defined(_LP64)
   // C2 expects long results in G1 we can't tell if we're returning to interpreted
   // or compiled so just be safe.
   __ sllx(O0, 32, G1);          // Shift bits into high G1
   __ srl (O1, 0, O1);           // Zero extend O1
   __ or3 (O1, G1, G1);          // OR 64 bits into G1
 #endif /* COMPILER2 && !_LP64 */
   // dispose of return address and remove activation
 #ifdef ASSERT
   {
     Label ok;
     __ cmp(I5_savedSP, FP);
     __ brx(Assembler::greaterEqualUnsigned, false, Assembler::pt, ok);
     __ delayed()->nop();
     __ stop("bad I5_savedSP value");
     __ should_not_reach_here();
     __ bind(ok);
   }
 #endif
   if (TraceJumps) {
     // Move target to register that is recordable
     __ mov(Lscratch, G3_scratch);
     __ JMP(G3_scratch, 0);
   } else {
     __ jmp(Lscratch, 0);
   }
   __ delayed()->nop();
   if (inc_counter) {
     // handle invocation counter overflow
     __ bind(invocation_counter_overflow);
     generate_counter_overflow(Lcontinue);
   }
   return entry;
 }
 // Generic method entry to (asm) interpreter
 //------------------------------------------------------------------------------------------------------------------------
 //
 address InterpreterGenerator::generate_normal_entry(bool synchronized) {
   address entry = __ pc();
   bool inc_counter  = UseCompiler || CountCompiledCalls;
   // the following temporary registers are used during frame creation
   const Register Gtmp1 = G3_scratch ;
   const Register Gtmp2 = G1_scratch;
   // make sure registers are different!
   assert_different_registers(G2_thread, G5_method, Gargs, Gtmp1, Gtmp2);
   const Address size_of_parameters(G5_method, methodOopDesc::size_of_parameters_offset());
   const Address size_of_locals    (G5_method, methodOopDesc::size_of_locals_offset());
   // Seems like G5_method is live at the point this is used. So we could make this look consistent
   // and use in the asserts.
   const Address access_flags      (Lmethod,   methodOopDesc::access_flags_offset());
   __ verify_oop(G5_method);
   const Register Glocals_size = G3;
   assert_different_registers(Glocals_size, G4_scratch, Gframe_size);
   // make sure method is not native & not abstract
   // rethink these assertions - they can be simplified and shared (gri 2/25/2000)
 #ifdef ASSERT
   __ ld(G5_method, methodOopDesc::access_flags_offset(), Gtmp1);
   {
     Label L;
     __ btst(JVM_ACC_NATIVE, Gtmp1);
     __ br(Assembler::zero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("tried to execute native method as non-native");
     __ bind(L);
   }
   { Label L;
     __ btst(JVM_ACC_ABSTRACT, Gtmp1);
     __ br(Assembler::zero, false, Assembler::pt, L);
     __ delayed()->nop();
     __ stop("tried to execute abstract method as non-abstract");
     __ bind(L);
   }
 #endif // ASSERT
   // generate the code to allocate the interpreter stack frame
   generate_fixed_frame(false);
 #ifdef FAST_DISPATCH
   __ set((intptr_t)Interpreter::dispatch_table(), IdispatchTables);
                                           // set bytecode dispatch table base
 #endif
   //
   // Code to initialize the extra (i.e. non-parm) locals
   //
   Register init_value = noreg;    // will be G0 if we must clear locals
   // The way the code was setup before zerolocals was always true for vanilla java entries.
   // It could only be false for the specialized entries like accessor or empty which have
   // no extra locals so the testing was a waste of time and the extra locals were always
   // initialized. We removed this extra complication to already over complicated code.
   init_value = G0;
   Label clear_loop;
   // NOTE: If you change the frame layout, this code will need to
   // be updated!
   __ lduh( size_of_locals, O2 );
   __ lduh( size_of_parameters, O1 );
   __ sll( O2, Interpreter::logStackElementSize, O2);
   __ sll( O1, Interpreter::logStackElementSize, O1 );
   __ sub( Llocals, O2, O2 );
   __ sub( Llocals, O1, O1 );
   __ bind( clear_loop );
   __ inc( O2, wordSize );
   __ cmp( O2, O1 );
   __ brx( Assembler::lessEqualUnsigned, true, Assembler::pt, clear_loop );
   __ delayed()->st_ptr( init_value, O2, 0 );
   const Address do_not_unlock_if_synchronized(G2_thread,
     JavaThread::do_not_unlock_if_synchronized_offset());
   // Since at this point in the method invocation the exception handler
   // would try to exit the monitor of synchronized methods which hasn't
   // been entered yet, we set the thread local variable
   // _do_not_unlock_if_synchronized to true. If any exception was thrown by
   // runtime, exception handling i.e. unlock_if_synchronized_method will
   // check this thread local flag.
   __ movbool(true, G3_scratch);
   __ stbool(G3_scratch, do_not_unlock_if_synchronized);
   // increment invocation counter and check for overflow
   //
   // Note: checking for negative value instead of overflow
   //       so we have a 'sticky' overflow test (may be of
   //       importance as soon as we have true MT/MP)
   Label invocation_counter_overflow;
   Label profile_method;
   Label profile_method_continue;
   Label Lcontinue;
   if (inc_counter) {
     generate_counter_incr(&invocation_counter_overflow, &profile_method, &profile_method_continue);
     if (ProfileInterpreter) {
       __ bind(profile_method_continue);
     }
   }
   __ bind(Lcontinue);
   bang_stack_shadow_pages(false);
   // reset the _do_not_unlock_if_synchronized flag
   __ stbool(G0, do_not_unlock_if_synchronized);
   // check for synchronized methods
   // Must happen AFTER invocation_counter check and stack overflow check,
   // so method is not locked if overflows.
   if (synchronized) {
     lock_method();
   } else {
 #ifdef ASSERT
     { Label ok;
       __ ld(access_flags, O0);
       __ btst(JVM_ACC_SYNCHRONIZED, O0);
       __ br( Assembler::zero, false, Assembler::pt, ok);
       __ delayed()->nop();
       __ stop("method needs synchronization");
       __ bind(ok);
     }
 #endif // ASSERT
   }
   // start execution
   __ verify_thread();
   // jvmti support
   __ notify_method_entry();
   // start executing instructions
   __ dispatch_next(vtos);
   if (inc_counter) {
     if (ProfileInterpreter) {
       // We have decided to profile this method in the interpreter
       __ bind(profile_method);
       __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method), Lbcp, true);
 #ifdef ASSERT
       __ tst(O0);
       __ breakpoint_trap(Assembler::notEqual);
 #endif
       __ set_method_data_pointer();
       __ ba(false, profile_method_continue);
       __ delayed()->nop();
     }
     // handle invocation counter overflow
     __ bind(invocation_counter_overflow);
     generate_counter_overflow(Lcontinue);
   }
   return entry;
 }
 //----------------------------------------------------------------------------------------------------
 // Entry points & stack frame layout
 //
 // Here we generate the various kind of entries into the interpreter.
 // The two main entry type are generic bytecode methods and native call method.
 // These both come in synchronized and non-synchronized versions but the
 // frame layout they create is very similar. The other method entry
 // types are really just special purpose entries that are really entry
 // and interpretation all in one. These are for trivial methods like
 // accessor, empty, or special math methods.
 //
 // When control flow reaches any of the entry types for the interpreter
 // the following holds ->
 //
 // C2 Calling Conventions:
 //
 // The entry code below assumes that the following registers are set
 // when coming in:
 //    G5_method: holds the methodOop of the method to call
 //    Lesp:    points to the TOS of the callers expression stack
 //             after having pushed all the parameters
 //
 // The entry code does the following to setup an interpreter frame
 //   pop parameters from the callers stack by adjusting Lesp
 //   set O0 to Lesp
 //   compute X = (max_locals - num_parameters)
 //   bump SP up by X to accomadate the extra locals
 //   compute X = max_expression_stack
 //               + vm_local_words
 //               + 16 words of register save area
 //   save frame doing a save sp, -X, sp growing towards lower addresses
 //   set Lbcp, Lmethod, LcpoolCache
 //   set Llocals to i0
 //   set Lmonitors to FP - rounded_vm_local_words
 //   set Lesp to Lmonitors - 4
 //
 //  The frame has now been setup to do the rest of the entry code
 // Try this optimization:  Most method entries could live in a
 // "one size fits all" stack frame without all the dynamic size
 // calculations.  It might be profitable to do all this calculation
 // statically and approximately for "small enough" methods.
 //-----------------------------------------------------------------------------------------------
 // C1 Calling conventions
 //
 // Upon method entry, the following registers are setup:
 //
 // g2 G2_thread: current thread
 // g5 G5_method: method to activate
 // g4 Gargs  : pointer to last argument
 //
 //
 // Stack:
 //
 // +---------------+ <--- sp
 // |               |
 // : reg save area :
 // |               |
 // +---------------+ <--- sp + 0x40
 // |               |
 // : extra 7 slots :      note: these slots are not really needed for the interpreter (fix later)
 // |               |
 // +---------------+ <--- sp + 0x5c
 // |               |
 // :     free      :
 // |               |
 // +---------------+ <--- Gargs
 // |               |
 // :   arguments   :
 // |               |
 // +---------------+
 // |               |
 //
 //
 //
 // AFTER FRAME HAS BEEN SETUP for method interpretation the stack looks like:
 //
 // +---------------+ <--- sp
 // |               |
 // : reg save area :
 // |               |
 // +---------------+ <--- sp + 0x40
 // |               |
 // : extra 7 slots :      note: these slots are not really needed for the interpreter (fix later)
 // |               |
 // +---------------+ <--- sp + 0x5c
 // |               |
 // :               :
 // |               | <--- Lesp
 // +---------------+ <--- Lmonitors (fp - 0x18)
 // |   VM locals   |
 // +---------------+ <--- fp
 // |               |
 // : reg save area :
 // |               |
 // +---------------+ <--- fp + 0x40
 // |               |
 // : extra 7 slots :      note: these slots are not really needed for the interpreter (fix later)
 // |               |
 // +---------------+ <--- fp + 0x5c
 // |               |
 // :     free      :
 // |               |
 // +---------------+
 // |               |
 // : nonarg locals :
 // |               |
 // +---------------+
 // |               |
 // :   arguments   :
 // |               | <--- Llocals
 // +---------------+ <--- Gargs
 // |               |
 static int size_activation_helper(int callee_extra_locals, int max_stack, int monitor_size) {
   // Figure out the size of an interpreter frame (in words) given that we have a fully allocated
   // expression stack, the callee will have callee_extra_locals (so we can account for
   // frame extension) and monitor_size for monitors. Basically we need to calculate
   // this exactly like generate_fixed_frame/generate_compute_interpreter_state.
   //
   //
   // The big complicating thing here is that we must ensure that the stack stays properly
   // aligned. This would be even uglier if monitor size wasn't modulo what the stack
   // needs to be aligned for). We are given that the sp (fp) is already aligned by
   // the caller so we must ensure that it is properly aligned for our callee.
   //
   const int rounded_vm_local_words =
        round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
   // callee_locals and max_stack are counts, not the size in frame.
   const int locals_size =
        round_to(callee_extra_locals * Interpreter::stackElementWords, WordsPerLong);
   const int max_stack_words = max_stack * Interpreter::stackElementWords;
   return (round_to((max_stack_words
                    //6815692//+ methodOopDesc::extra_stack_words()
                    + rounded_vm_local_words
                    + frame::memory_parameter_word_sp_offset), WordsPerLong)
                    // already rounded
                    + locals_size + monitor_size);
 }
 // How much stack a method top interpreter activation needs in words.
 int AbstractInterpreter::size_top_interpreter_activation(methodOop method) {
   // See call_stub code
   int call_stub_size  = round_to(7 + frame::memory_parameter_word_sp_offset,
                                  WordsPerLong);    // 7 + register save area
   // Save space for one monitor to get into the interpreted method in case
   // the method is synchronized
   int monitor_size    = method->is_synchronized() ?
 *frame::interpreter_frame_monitor_size() : 0;
   return size_activation_helper(method->max_locals(), method->max_stack(),
                                  monitor_size) + call_stub_size;
 }
 int AbstractInterpreter::layout_activation(methodOop method,
                                            int tempcount,
                                            int popframe_extra_args,
                                            int moncount,
                                            int callee_param_count,
                                            int callee_local_count,
                                            frame* caller,
                                            frame* interpreter_frame,
                                            bool is_top_frame) {
   // Note: This calculation must exactly parallel the frame setup
   // in InterpreterGenerator::generate_fixed_frame.
   // If f!=NULL, set up the following variables:
   //   - Lmethod
   //   - Llocals
   //   - Lmonitors (to the indicated number of monitors)
   //   - Lesp (to the indicated number of temps)
   // The frame f (if not NULL) on entry is a description of the caller of the frame
   // we are about to layout. We are guaranteed that we will be able to fill in a
   // new interpreter frame as its callee (i.e. the stack space is allocated and
   // the amount was determined by an earlier call to this method with f == NULL).
   // On return f (if not NULL) while describe the interpreter frame we just layed out.
   int monitor_size           = moncount * frame::interpreter_frame_monitor_size();
   int rounded_vm_local_words = round_to(frame::interpreter_frame_vm_local_words,WordsPerLong);
   assert(monitor_size == round_to(monitor_size, WordsPerLong), "must align");
   //
   // Note: if you look closely this appears to be doing something much different
   // than generate_fixed_frame. What is happening is this. On sparc we have to do
   // this dance with interpreter_sp_adjustment because the window save area would
   // appear just below the bottom (tos) of the caller's java expression stack. Because
   // the interpreter want to have the locals completely contiguous generate_fixed_frame
   // will adjust the caller's sp for the "extra locals" (max_locals - parameter_size).
   // Now in generate_fixed_frame the extension of the caller's sp happens in the callee.
   // In this code the opposite occurs the caller adjusts it's own stack base on the callee.
   // This is mostly ok but it does cause a problem when we get to the initial frame (the oldest)
   // because the oldest frame would have adjust its callers frame and yet that frame
   // already exists and isn't part of this array of frames we are unpacking. So at first
   // glance this would seem to mess up that frame. However Deoptimization::fetch_unroll_info_helper()
   // will after it calculates all of the frame's on_stack_size()'s will then figure out the
   // amount to adjust the caller of the initial (oldest) frame and the calculation will all
   // add up. It does seem like it simpler to account for the adjustment here (and remove the
   // callee... parameters here). However this would mean that this routine would have to take
   // the caller frame as input so we could adjust its sp (and set it's interpreter_sp_adjustment)
   // and run the calling loop in the reverse order. This would also would appear to mean making
   // this code aware of what the interactions are when that initial caller fram was an osr or
   // other adapter frame. deoptimization is complicated enough and  hard enough to debug that
   // there is no sense in messing working code.
   //
   int rounded_cls = round_to((callee_local_count - callee_param_count), WordsPerLong);
   assert(rounded_cls == round_to(rounded_cls, WordsPerLong), "must align");
   int raw_frame_size = size_activation_helper(rounded_cls, method->max_stack(),
                                               monitor_size);
   if (interpreter_frame != NULL) {
     // The skeleton frame must already look like an interpreter frame
     // even if not fully filled out.
     assert(interpreter_frame->is_interpreted_frame(), "Must be interpreted frame");
     intptr_t* fp = interpreter_frame->fp();
     JavaThread* thread = JavaThread::current();
     RegisterMap map(thread, false);
     // More verification that skeleton frame is properly walkable
     assert(fp == caller->sp(), "fp must match");
     intptr_t* montop     = fp - rounded_vm_local_words;
     // preallocate monitors (cf. __ add_monitor_to_stack)
     intptr_t* monitors = montop - monitor_size;
     // preallocate stack space
     intptr_t*  esp = monitors - 1 -
                      (tempcount * Interpreter::stackElementWords) -
                      popframe_extra_args;
     int local_words = method->max_locals() * Interpreter::stackElementWords;
     int parm_words  = method->size_of_parameters() * Interpreter::stackElementWords;
     NEEDS_CLEANUP;
     intptr_t* locals;
     if (caller->is_interpreted_frame()) {
       // Can force the locals area to end up properly overlapping the top of the expression stack.
       intptr_t* Lesp_ptr = caller->interpreter_frame_tos_address() - 1;
       // Note that this computation means we replace size_of_parameters() values from the caller
       // interpreter frame's expression stack with our argument locals
       locals = Lesp_ptr + parm_words;
       int delta = local_words - parm_words;
       int computed_sp_adjustment = (delta > 0) ? round_to(delta, WordsPerLong) : 0;
       *interpreter_frame->register_addr(I5_savedSP)    = (intptr_t) (fp + computed_sp_adjustment) - STACK_BIAS;
     } else {
       assert(caller->is_compiled_frame() || caller->is_entry_frame(), "only possible cases");
       // Don't have Lesp available; lay out locals block in the caller
       // adjacent to the register window save area.
       //
       // Compiled frames do not allocate a varargs area which is why this if
       // statement is needed.
       //
       if (caller->is_compiled_frame()) {
         locals = fp + frame::register_save_words + local_words - 1;
       } else {
         locals = fp + frame::memory_parameter_word_sp_offset + local_words - 1;
       }
       if (!caller->is_entry_frame()) {
         // Caller wants his own SP back
         int caller_frame_size = caller->cb()->frame_size();
         *interpreter_frame->register_addr(I5_savedSP) = (intptr_t)(caller->fp() - caller_frame_size) - STACK_BIAS;
       }
     }
     if (TraceDeoptimization) {
       if (caller->is_entry_frame()) {
         // make sure I5_savedSP and the entry frames notion of saved SP
         // agree.  This assertion duplicate a check in entry frame code
         // but catches the failure earlier.
         assert(*caller->register_addr(Lscratch) == *interpreter_frame->register_addr(I5_savedSP),
                "would change callers SP");
       }
       if (caller->is_entry_frame()) {
         tty->print("entry ");
       }
       if (caller->is_compiled_frame()) {
         tty->print("compiled ");
         if (caller->is_deoptimized_frame()) {
           tty->print("(deopt) ");
         }
       }
       if (caller->is_interpreted_frame()) {
         tty->print("interpreted ");
       }
       tty->print_cr("caller fp=0x%x sp=0x%x", caller->fp(), caller->sp());
       tty->print_cr("save area = 0x%x, 0x%x", caller->sp(), caller->sp() + 16);
       tty->print_cr("save area = 0x%x, 0x%x", caller->fp(), caller->fp() + 16);
       tty->print_cr("interpreter fp=0x%x sp=0x%x", interpreter_frame->fp(), interpreter_frame->sp());
       tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->sp(), interpreter_frame->sp() + 16);
       tty->print_cr("save area = 0x%x, 0x%x", interpreter_frame->fp(), interpreter_frame->fp() + 16);
       tty->print_cr("Llocals = 0x%x", locals);
       tty->print_cr("Lesp = 0x%x", esp);
       tty->print_cr("Lmonitors = 0x%x", monitors);
     }
     if (method->max_locals() > 0) {
       assert(locals < caller->sp() || locals >= (caller->sp() + 16), "locals in save area");
       assert(locals < caller->fp() || locals > (caller->fp() + 16), "locals in save area");
       assert(locals < interpreter_frame->sp() || locals > (interpreter_frame->sp() + 16), "locals in save area");
       assert(locals < interpreter_frame->fp() || locals >= (interpreter_frame->fp() + 16), "locals in save area");
     }
 #ifdef _LP64
     assert(*interpreter_frame->register_addr(I5_savedSP) & 1, "must be odd");
 #endif
     *interpreter_frame->register_addr(Lmethod)     = (intptr_t) method;
     *interpreter_frame->register_addr(Llocals)     = (intptr_t) locals;
     *interpreter_frame->register_addr(Lmonitors)   = (intptr_t) monitors;
     *interpreter_frame->register_addr(Lesp)        = (intptr_t) esp;
     // Llast_SP will be same as SP as there is no adapter space
     *interpreter_frame->register_addr(Llast_SP)    = (intptr_t) interpreter_frame->sp() - STACK_BIAS;
     *interpreter_frame->register_addr(LcpoolCache) = (intptr_t) method->constants()->cache();
 #ifdef FAST_DISPATCH
     *interpreter_frame->register_addr(IdispatchTables) = (intptr_t) Interpreter::dispatch_table();
 #endif
 #ifdef ASSERT
     BasicObjectLock* mp = (BasicObjectLock*)monitors;
     assert(interpreter_frame->interpreter_frame_method() == method, "method matches");
     assert(interpreter_frame->interpreter_frame_local_at(9) == (intptr_t *)((intptr_t)locals - (9 * Interpreter::stackElementSize)), "locals match");
     assert(interpreter_frame->interpreter_frame_monitor_end()   == mp, "monitor_end matches");
     assert(((intptr_t *)interpreter_frame->interpreter_frame_monitor_begin()) == ((intptr_t *)mp)+monitor_size, "monitor_begin matches");
     assert(interpreter_frame->interpreter_frame_tos_address()-1 == esp, "esp matches");
     // check bounds
     intptr_t* lo = interpreter_frame->sp() + (frame::memory_parameter_word_sp_offset - 1);
     intptr_t* hi = interpreter_frame->fp() - rounded_vm_local_words;
     assert(lo < monitors && montop <= hi, "monitors in bounds");
     assert(lo <= esp && esp < monitors, "esp in bounds");
 #endif // ASSERT
   }
   return raw_frame_size;
 }
 //----------------------------------------------------------------------------------------------------
 // Exceptions
 void TemplateInterpreterGenerator::generate_throw_exception() {
   // Entry point in previous activation (i.e., if the caller was interpreted)
   Interpreter::_rethrow_exception_entry = __ pc();
   // O0: exception
   // entry point for exceptions thrown within interpreter code
   Interpreter::_throw_exception_entry = __ pc();
   __ verify_thread();
   // expression stack is undefined here
   // O0: exception, i.e. Oexception
   // Lbcp: exception bcx
   __ verify_oop(Oexception);
   // expression stack must be empty before entering the VM in case of an exception
   __ empty_expression_stack();
   // find exception handler address and preserve exception oop
   // call C routine to find handler and jump to it
   __ call_VM(O1, CAST_FROM_FN_PTR(address, InterpreterRuntime::exception_handler_for_exception), Oexception);
   __ push_ptr(O1); // push exception for exception handler bytecodes
   __ JMP(O0, 0); // jump to exception handler (may be remove activation entry!)
   __ delayed()->nop();
   // if the exception is not handled in the current frame
   // the frame is removed and the exception is rethrown
   // (i.e. exception continuation is _rethrow_exception)
   //
   // Note: At this point the bci is still the bxi for the instruction which caused
   //       the exception and the expression stack is empty. Thus, for any VM calls
   //       at this point, GC will find a legal oop map (with empty expression stack).
   // in current activation
   // tos: exception
   // Lbcp: exception bcp
   //
   // JVMTI PopFrame support
   //
   Interpreter::_remove_activation_preserving_args_entry = __ pc();
   Address popframe_condition_addr(G2_thread, JavaThread::popframe_condition_offset());
   // Set the popframe_processing bit in popframe_condition indicating that we are
   // currently handling popframe, so that call_VMs that may happen later do not trigger new
   // popframe handling cycles.
   __ ld(popframe_condition_addr, G3_scratch);
   __ or3(G3_scratch, JavaThread::popframe_processing_bit, G3_scratch);
   __ stw(G3_scratch, popframe_condition_addr);
   // Empty the expression stack, as in normal exception handling
   __ empty_expression_stack();
   __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false, /* install_monitor_exception */ false);
   {
     // Check to see whether we are returning to a deoptimized frame.
     // (The PopFrame call ensures that the caller of the popped frame is
     // either interpreted or compiled and deoptimizes it if compiled.)
     // In this case, we can't call dispatch_next() after the frame is
     // popped, but instead must save the incoming arguments and restore
     // them after deoptimization has occurred.
     //
     // Note that we don't compare the return PC against the
     // deoptimization blob's unpack entry because of the presence of
     // adapter frames in C2.
     Label caller_not_deoptimized;
     __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), I7);
     __ tst(O0);
     __ brx(Assembler::notEqual, false, Assembler::pt, caller_not_deoptimized);
     __ delayed()->nop();
     const Register Gtmp1 = G3_scratch;
     const Register Gtmp2 = G1_scratch;
     // Compute size of arguments for saving when returning to deoptimized caller
     __ lduh(Lmethod, in_bytes(methodOopDesc::size_of_parameters_offset()), Gtmp1);
     __ sll(Gtmp1, Interpreter::logStackElementSize, Gtmp1);
     __ sub(Llocals, Gtmp1, Gtmp2);
     __ add(Gtmp2, wordSize, Gtmp2);
     // Save these arguments
     __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, Deoptimization::popframe_preserve_args), G2_thread, Gtmp1, Gtmp2);
     // Inform deoptimization that it is responsible for restoring these arguments
     __ set(JavaThread::popframe_force_deopt_reexecution_bit, Gtmp1);
     Address popframe_condition_addr(G2_thread, JavaThread::popframe_condition_offset());
     __ st(Gtmp1, popframe_condition_addr);
     // Return from the current method
     // The caller's SP was adjusted upon method entry to accomodate
     // the callee's non-argument locals. Undo that adjustment.
     __ ret();
     __ delayed()->restore(I5_savedSP, G0, SP);
     __ bind(caller_not_deoptimized);
   }
   // Clear the popframe condition flag
   __ stw(G0 /* popframe_inactive */, popframe_condition_addr);
   // Get out of the current method (how this is done depends on the particular compiler calling
   // convention that the interpreter currently follows)
   // The caller's SP was adjusted upon method entry to accomodate
   // the callee's non-argument locals. Undo that adjustment.
   __ restore(I5_savedSP, G0, SP);
   // The method data pointer was incremented already during
   // call profiling. We have to restore the mdp for the current bcp.
   if (ProfileInterpreter) {
     __ set_method_data_pointer_for_bcp();
   }
   // Resume bytecode interpretation at the current bcp
   __ dispatch_next(vtos);
   // end of JVMTI PopFrame support
   Interpreter::_remove_activation_entry = __ pc();
   // preserve exception over this code sequence (remove activation calls the vm, but oopmaps are not correct here)
   __ pop_ptr(Oexception);                                  // get exception
   // Intel has the following comment:
   //// remove the activation (without doing throws on illegalMonitorExceptions)
   // They remove the activation without checking for bad monitor state.
   // %%% We should make sure this is the right semantics before implementing.
   // %%% changed set_vm_result_2 to set_vm_result and get_vm_result_2 to get_vm_result. Is there a bug here?
   __ set_vm_result(Oexception);
   __ unlock_if_synchronized_method(vtos, /* throw_monitor_exception */ false);
   __ notify_method_exit(false, vtos, InterpreterMacroAssembler::SkipNotifyJVMTI);
   __ get_vm_result(Oexception);
   __ verify_oop(Oexception);
     const int return_reg_adjustment = frame::pc_return_offset;
   Address issuing_pc_addr(I7, return_reg_adjustment);
   // We are done with this activation frame; find out where to go next.
   // The continuation point will be an exception handler, which expects
   // the following registers set up:
   //
   // Oexception: exception
   // Oissuing_pc: the local call that threw exception
   // Other On: garbage
   // In/Ln:  the contents of the caller's register window
   //
   // We do the required restore at the last possible moment, because we
   // need to preserve some state across a runtime call.
   // (Remember that the caller activation is unknown--it might not be
   // interpreted, so things like Lscratch are useless in the caller.)
   // Although the Intel version uses call_C, we can use the more
   // compact call_VM.  (The only real difference on SPARC is a
   // harmlessly ignored [re]set_last_Java_frame, compared with
   // the Intel code which lacks this.)
   __ mov(Oexception,      Oexception ->after_save());  // get exception in I0 so it will be on O0 after restore
   __ add(issuing_pc_addr, Oissuing_pc->after_save());  // likewise set I1 to a value local to the caller
   __ super_call_VM_leaf(L7_thread_cache,
                         CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address),
                         G2_thread, Oissuing_pc->after_save());
   // The caller's SP was adjusted upon method entry to accomodate
   // the callee's non-argument locals. Undo that adjustment.
   __ JMP(O0, 0);                         // return exception handler in caller
   __ delayed()->restore(I5_savedSP, G0, SP);
   // (same old exception object is already in Oexception; see above)
   // Note that an "issuing PC" is actually the next PC after the call
 }
 //
 // JVMTI ForceEarlyReturn support
 //
 address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) {
   address entry = __ pc();
   __ empty_expression_stack();
   __ load_earlyret_value(state);
   __ ld_ptr(G2_thread, JavaThread::jvmti_thread_state_offset(), G3_scratch);
   Address cond_addr(G3_scratch, JvmtiThreadState::earlyret_state_offset());
   // Clear the earlyret state
   __ stw(G0 /* JvmtiThreadState::earlyret_inactive */, cond_addr);
   __ remove_activation(state,
                        /* throw_monitor_exception */ false,
                        /* install_monitor_exception */ false);
   // The caller's SP was adjusted upon method entry to accomodate
   // the callee's non-argument locals. Undo that adjustment.
   __ ret();                             // return to caller
   __ delayed()->restore(I5_savedSP, G0, SP);
   return entry;
 } // end of JVMTI ForceEarlyReturn support
 //------------------------------------------------------------------------------------------------------------------------
 // Helper for vtos entry point generation
 void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, address& bep, address& cep, address& sep, address& aep, address& iep, address& lep, address& fep, address& dep, address& vep) {
   assert(t->is_valid() && t->tos_in() == vtos, "illegal template");
   Label L;
   aep = __ pc(); __ push_ptr(); __ ba(false, L); __ delayed()->nop();
   fep = __ pc(); __ push_f();   __ ba(false, L); __ delayed()->nop();
   dep = __ pc(); __ push_d();   __ ba(false, L); __ delayed()->nop();
   lep = __ pc(); __ push_l();   __ ba(false, L); __ delayed()->nop();
   iep = __ pc(); __ push_i();
   bep = cep = sep = iep;                        // there aren't any
   vep = __ pc(); __ bind(L);                    // fall through
   generate_and_dispatch(t);
 }
 // --------------------------------------------------------------------------------
 InterpreterGenerator::InterpreterGenerator(StubQueue* code)
  : TemplateInterpreterGenerator(code) {
    generate_all(); // down here so it can be "virtual"
 }
 // --------------------------------------------------------------------------------
 // Non-product code
 #ifndef PRODUCT
 address TemplateInterpreterGenerator::generate_trace_code(TosState state) {
   address entry = __ pc();
   __ push(state);
   __ mov(O7, Lscratch); // protect return address within interpreter
   // Pass a 0 (not used in sparc) and the top of stack to the bytecode tracer
   __ mov( Otos_l2, G3_scratch );
   __ call_VM(noreg, CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), G0, Otos_l1, G3_scratch);
   __ mov(Lscratch, O7); // restore return address
   __ pop(state);
   __ retl();
   __ delayed()->nop();
   return entry;
 }
 // helpers for generate_and_dispatch
 void TemplateInterpreterGenerator::count_bytecode() {
   __ inc_counter(&BytecodeCounter::_counter_value, G3_scratch, G4_scratch);
 }
 void TemplateInterpreterGenerator::histogram_bytecode(Template* t) {
   __ inc_counter(&BytecodeHistogram::_counters[t->bytecode()], G3_scratch, G4_scratch);
 }
 void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) {
   AddressLiteral index   (&BytecodePairHistogram::_index);
   AddressLiteral counters((address) &BytecodePairHistogram::_counters);
   // get index, shift out old bytecode, bring in new bytecode, and store it
   // _index = (_index >> log2_number_of_codes) |
   //          (bytecode << log2_number_of_codes);
   __ load_contents(index, G4_scratch);
   __ srl( G4_scratch, BytecodePairHistogram::log2_number_of_codes, G4_scratch );
   __ set( ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes,  G3_scratch );
   __ or3( G3_scratch,  G4_scratch, G4_scratch );
   __ store_contents(G4_scratch, index, G3_scratch);
   // bump bucket contents
   // _counters[_index] ++;
   __ set(counters, G3_scratch);                       // loads into G3_scratch
   __ sll( G4_scratch, LogBytesPerWord, G4_scratch );  // Index is word address
   __ add (G3_scratch, G4_scratch, G3_scratch);        // Add in index
   __ ld (G3_scratch, 0, G4_scratch);
   __ inc (G4_scratch);
   __ st (G4_scratch, 0, G3_scratch);
 }
 void TemplateInterpreterGenerator::trace_bytecode(Template* t) {
   // Call a little run-time stub to avoid blow-up for each bytecode.
   // The run-time runtime saves the right registers, depending on
   // the tosca in-state for the given template.
   address entry = Interpreter::trace_code(t->tos_in());
   guarantee(entry != NULL, "entry must have been generated");
   __ call(entry, relocInfo::none);
   __ delayed()->nop();
 }
 void TemplateInterpreterGenerator::stop_interpreter_at() {
   AddressLiteral counter(&BytecodeCounter::_counter_value);
   __ load_contents(counter, G3_scratch);
   AddressLiteral stop_at(&StopInterpreterAt);
   __ load_ptr_contents(stop_at, G4_scratch);
   __ cmp(G3_scratch, G4_scratch);
   __ breakpoint_trap(Assembler::equal);
 }
 #endif // not PRODUCT
 #endif // !CC_INTERP

Mercurial > jdk8-mips64-public > hotspot / annotate

src/cpu/sparc/vm/templateInterpreter_sparc.cpp@3dc12ef8735e (annotated)

src/cpu/sparc/vm/templateInterpreter_sparc.cpp