jdk8-mips64-public: common/makefiles/devkit/Tools.gmk@c0fa87863427

1 #

     2 # Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.

     3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

4 #

     5 # This code is free software; you can redistribute it and/or modify it

     6 # under the terms of the GNU General Public License version 2 only, as

     7 # published by the Free Software Foundation.  Oracle designates this

     8 # particular file as subject to the "Classpath" exception as provided

     9 # by Oracle in the LICENSE file that accompanied this code.

    10 #

    11 # This code is distributed in the hope that it will be useful, but WITHOUT

    12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    13 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

    14 # version 2 for more details (a copy is included in the LICENSE file that

    15 # accompanied this code).

    16 #

    17 # You should have received a copy of the GNU General Public License version

    18 # 2 along with this work; if not, write to the Free Software Foundation,

    19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

    20 #

    21 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

    22 # or visit www.oracle.com if you need additional information or have any

    23 # questions.

    24 #

    26 ##########################################################################################

    27 #

    28 # Workhorse makefile for creating ONE cross compiler

    29 # Needs either to be from BUILD -> BUILD OR have

    30 # BUILD -> HOST prebuilt

    31 #

    32 # NOTE: There is a bug here. We don't limit the

    33 # PATH when building BUILD -> BUILD, which means that

    34 # if you configure after you've once build the BUILD->BUILD

    35 # compiler THAT one will be picked up as the compiler for itself.

    36 # This is not so great, especially if you did a partial delete

    37 # of the target tree.

    38 #

    39 # Fix this...

    40 #

    42 $(info TARGET=$(TARGET))

    43 $(info HOST=$(HOST))

    44 $(info BUILD=$(BUILD))

    46 ARCH		:= $(word 1,$(subst -, ,$(TARGET)))

    48 ##########################################################################################

    49 # Define external dependencies

    51 # Latest that could be made to work.

    52 gcc_ver		:= gcc-4.7.3

    53 binutils_ver	:= binutils-2.22

    54 ccache_ver	:= ccache-3.1.9

    55 mpfr_ver        := mpfr-3.0.1

    56 gmp_ver         := gmp-4.3.2

    57 mpc_ver		:= mpc-1.0.1

    59 GCC		:= http://ftp.gnu.org/pub/gnu/gcc/$(gcc_ver)/$(gcc_ver).tar.bz2

    60 BINUTILS	:= http://ftp.gnu.org/pub/gnu/binutils/$(binutils_ver).tar.bz2

    61 CCACHE		:= http://samba.org/ftp/ccache/$(ccache_ver).tar.gz

    62 MPFR		:= http://www.mpfr.org/${mpfr_ver}/${mpfr_ver}.tar.bz2

    63 GMP 		:= http://ftp.gnu.org/pub/gnu/gmp/${gmp_ver}.tar.bz2

    64 MPC		:= http://www.multiprecision.org/mpc/download/${mpc_ver}.tar.gz

    66 # RPMs in OEL5.5

    67 RPM_LIST 	:= \

    68 		kernel-headers \

    69 		glibc-2 glibc-headers glibc-devel \

    70 		cups-libs cups-devel \

    71 		libX11 libX11-devel \

    72 		xorg-x11-proto-devel \

    73 		alsa-lib alsa-lib-devel \

    74 		libXext libXext-devel \

    75 		libXtst libXtst-devel \

    76 		libXrender libXrender-devel \

    77 		freetype freetype-devel \

    78 		libXt libXt-devel \

    79 		libSM libSM-devel \

    80 		libICE libICE-devel \

    81 		libXi libXi-devel \

    82 		libXdmcp libXdmcp-devel \

    83 		libXau libXau-devel \

    84 		libgcc

    87 ifeq ($(ARCH),x86_64)

    88   RPM_DIR ?= $(RPM_DIR_x86_64)

    89   RPM_ARCHS := x86_64

    90   ifeq ($(BUILD),$(HOST))

    91     ifeq ($(TARGET),$(HOST))

    92       # When building the native compiler for x86_64, enable mixed mode.

    93       RPM_ARCHS	+= i386 i686

    94     endif

    95   endif

    96 else

    97   RPM_DIR ?= $(RPM_DIR_i686)

    98   RPM_ARCHS := i386 i686

    99 endif

   101 # Sort to remove duplicates

   102 RPM_FILE_LIST := $(sort $(foreach a,$(RPM_ARCHS),$(wildcard $(patsubst %,$(RPM_DIR)/%*$a.rpm,$(RPM_LIST)))))

   104 ifeq ($(RPM_FILE_LIST),)

   105   $(error Found no RPMs, RPM_DIR must point to list of directories to search for RPMs)

   106 endif

   108 ##########################################################################################

   109 # Define common directories and files

   111 # Ensure we have 32-bit libs also for x64. We enable mixed-mode.

   112 ifeq (x86_64,$(ARCH))

   113   LIBDIRS	:= lib64 lib

   114   CFLAGS_lib	:= -m32

   115 else

   116   LIBDIRS 	:= lib

   117 endif

   119 # Define directories

   120 RESULT		:= $(OUTPUT_ROOT)/result

   121 BUILDDIR	:= $(OUTPUT_ROOT)/$(HOST)/$(TARGET)

   122 PREFIX		:= $(RESULT)/$(HOST)

   123 TARGETDIR	:= $(PREFIX)/$(TARGET)

   124 SYSROOT		:= $(TARGETDIR)/sys-root

   125 DOWNLOAD	:= $(OUTPUT_ROOT)/download

   126 SRCDIR		:= $(OUTPUT_ROOT)/src

   128 # Marker file for unpacking rpms

   129 rpms		:= $(SYSROOT)/rpms_unpacked

   131 # Need to patch libs that are linker scripts to use non-absolute paths

   132 libs		:= $(SYSROOT)/libs_patched

   134 ##########################################################################################

   135 # Unpack source packages

   137 # Generate downloading + unpacking of sources.

   138 define Download

   139 $(1)_DIR	= $(abspath $(SRCDIR)/$(basename $(basename $(notdir $($(1))))))

   140 $(1)_CFG	= $$($(1)_DIR)/configure

   141 $(1)_FILE	= $(DOWNLOAD)/$(notdir $($(1)))

   143 $$($(1)_CFG)	: $$($(1)_FILE)

   144 		mkdir -p $$(SRCDIR)

   145 		tar -C $$(SRCDIR) -x$$(if $$(findstring .gz, $$<),z,j)f $$<

   146 		$$(foreach p,$$(abspath $$(wildcard $$(notdir $$($(1)_DIR)).patch)),	\

   147 			echo PATCHING $$(p) ;						\

   148 			patch -d $$($(1)_DIR) -p1 -i $$(p) ; 				\

   149 			)

   150 		touch $$@

   152 $$($(1)_FILE)	:

   153 		wget -P $(DOWNLOAD) $$($(1))

   154 endef

   156 # Download and unpack all source packages

   157 $(foreach p,GCC BINUTILS CCACHE MPFR GMP MPC,$(eval $(call Download,$(p))))

   159 ##########################################################################################

   160 # Unpack RPMS

   162 # Note. For building linux you should install rpm2cpio.

   163 define unrpm

   164 $(SYSROOT)/$(notdir $(1)).unpacked	\

   165 		: $(1)

   166 $$(rpms)	: $(SYSROOT)/$(notdir $(1)).unpacked

   167 endef

   169 %.unpacked	:

   170 		$(info Unpacking target rpms and libraries from $<)

   171 		@(mkdir -p $(@D);					\

   172 		cd $(@D);						\

   173 		rpm2cpio $< | 						\

   174 			cpio --extract --make-directories 		\

   175 				-f 					\

   176 				"./usr/share/doc/*" 			\

   177 				"./usr/share/man/*"			\

   178 				"./usr/X11R6/man/*" 			\

   179 				"*/X11/locale/*"			\

   180 				|| die ; )

   181 		touch $@

   183 $(foreach p,$(RPM_FILE_LIST),$(eval $(call unrpm,$(p))))

   185 ##########################################################################################

   187 # Note: MUST create a <sys-root>/usr/lib even if not really needed.

   188 # gcc will use a path relative to it to resolve lib64. (x86_64).

   189 # we're creating multi-lib compiler with 32bit libc as well, so we should

   190 # have it anyway, but just to make sure...

   191 # Patch libc.so and libpthread.so to force linking against libraries in sysroot

   192 # and not the ones installed on the build machine.

   193 $(libs)		: $(rpms)

   194 		@echo Patching libc and pthreads

   195 		@(for f in `find $(SYSROOT) -name libc.so -o -name libpthread.so`; do \

   196 			(cat $$f | sed -e 's|/usr/lib64/||g' 		\

   197 				       -e 's|/usr/lib/||g'		\

   198 				       -e 's|/lib64/||g'		\

   199 				       -e 's|/lib/||g' ) > $$f.tmp ;	\

   200 			mv $$f.tmp $$f				;	\

   201 		done)

   202 		@mkdir -p $(SYSROOT)/usr/lib

   203 		@touch $@

   205 ##########################################################################################

   207 # Define marker files for each source package to be compiled

   208 $(foreach t,binutils mpfr gmp mpc gcc ccache,$(eval $(t) = $(TARGETDIR)/$($(t)_ver).done))

   210 ##########################################################################################

   212 # Default base config

   213 CONFIG		= --target=$(TARGET) 					\

   214 			--host=$(HOST) --build=$(BUILD)			\

   215 			--prefix=$(PREFIX)

   217 PATHEXT 	= $(RESULT)/$(BUILD)/bin:

   219 PATHPRE		= PATH=$(PATHEXT)$(PATH)

   220 BUILDPAR	= -j16

   222 # Default commands to when making

   223 MAKECMD		=

   224 INSTALLCMD	= install

   227 declare_tools   = CC$(1)=$(2)gcc LD$(1)=$(2)ld AR$(1)=$(2)ar AS$(1)=$(2)as RANLIB$(1)=$(2)ranlib CXX$(1)=$(2)g++ OBJDUMP$(1)=$(2)objdump

   229 ifeq ($(HOST),$(BUILD))

   230 ifeq ($(HOST),$(TARGET))

   231 TOOLS		= $(call declare_tools,_FOR_TARGET,)

   232 endif

   233 endif

   235 TOOLS		?=  $(call declare_tools,_FOR_TARGET,$(TARGET)-)

   237 ##########################################################################################

   239 # Create a TARGET bfd + libiberty only.

   240 # Configure one or two times depending on mulitlib arch.

   241 # If multilib, the second should be 32-bit, and we resolve

   242 # CFLAG_<name> to most likely -m32.

   243 define mk_bfd

   244 $$(info Libs for $(1))

   245 $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \

   246 		: CFLAGS += $$(CFLAGS_$(1))

   247 $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \

   248 		: LIBDIRS = --libdir=$(TARGETDIR)/$(1)

   250 bfdlib		+= $$(TARGETDIR)/$$(binutils_ver)-$(subst /,-,$(1)).done

   251 bfdmakes	+= $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile

   252 endef

   254 # Create one set of bfds etc for each multilib arch

   255 $(foreach l,$(LIBDIRS),$(eval $(call mk_bfd,$(l))))

   257 # Only build these two libs.

   258 $(bfdlib)	: MAKECMD 	= all-libiberty all-bfd

   259 $(bfdlib)	: INSTALLCMD 	= install-libiberty install-bfd

   261 # Building targets libbfd + libiberty. HOST==TARGET, i.e not

   262 # for a cross env.

   263 $(bfdmakes)	: CONFIG = --target=$(TARGET) 				\

   264 			--host=$(TARGET) --build=$(BUILD)		\

   265 			--prefix=$(TARGETDIR) 				\

   266 			--with-sysroot=$(SYSROOT) 			\

   267 			$(LIBDIRS)

   269 $(bfdmakes)	: TOOLS = $(call declare_tools,_FOR_TARGET,$(TARGET)-) $(call declare_tools,,$(TARGET)-)

   271 ##########################################################################################

   273 $(gcc)		\

   274 $(binutils)	\

   275 $(gmp)		\

   276 $(mpfr)		\

   277 $(mpc)		\

   278 $(bfdmakes)	\

   279 $(ccache)	: ENVS += $(TOOLS)

   281 # libdir to work around hateful bfd stuff installing into wrong dirs...

   282 # ensure we have 64 bit bfd support in the HOST library. I.e our

   283 # compiler on i686 will know 64 bit symbols, BUT later

   284 # we build just the libs again for TARGET, then with whatever the arch

   285 # wants.

   286 $(BUILDDIR)/$(binutils_ver)/Makefile : CONFIG += --enable-64-bit-bfd --libdir=$(PREFIX)/$(word 1,$(LIBDIRS))

   288 # Makefile creation. Simply run configure in build dir.

   289 $(bfdmakes)				\

   290 $(BUILDDIR)/$(binutils_ver)/Makefile	\

   291 		: $(BINUTILS_CFG)

   292 		$(info Configuring $@. Log in $(@D)/log.config)

   293 		@mkdir -p $(@D)

   294 		(						\

   295 			cd $(@D) ;				\

   296 			$(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)"	\

   297 				$(BINUTILS_CFG) 		\

   298 				$(CONFIG) 			\

   299 				--with-sysroot=$(SYSROOT)	\

   300 				--disable-nls			\

   301 				--program-prefix=$(TARGET)-	\

   302 				--enable-multilib		\

   303 		) > $(@D)/log.config 2>&1

   304 		@echo 'done'

   306 $(BUILDDIR)/$(mpfr_ver)/Makefile	\

   307 		: $(MPFR_CFG)

   308 		$(info Configuring $@. Log in $(@D)/log.config)

   309 		@mkdir -p $(@D)

   310 		(						\

   311 			cd $(@D) ;				\

   312 			$(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)"	\

   313 				$(MPFR_CFG) 			\

   314 				$(CONFIG) 			\

   315 				--program-prefix=$(TARGET)-	\

   316 				--enable-shared=no		\

   317 				--with-gmp=$(PREFIX)	\

   318 		) > $(@D)/log.config 2>&1

   319 		@echo 'done'

   321 $(BUILDDIR)/$(gmp_ver)/Makefile	\

   322 		: $(GMP_CFG)

   323 		$(info Configuring $@. Log in $(@D)/log.config)

   324 		@mkdir -p $(@D)

   325 		(						\

   326 			cd $(@D) ;				\

   327 			$(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)"	\

   328 				$(GMP_CFG) 			\

   329 				--host=$(HOST) --build=$(BUILD)	\

   330 				--prefix=$(PREFIX)		\

   331 				--disable-nls			\

   332 				--program-prefix=$(TARGET)-	\

   333 				--enable-shared=no		\

   334 				--with-mpfr=$(PREFIX)	\

   335 		) > $(@D)/log.config 2>&1

   336 		@echo 'done'

   338 $(BUILDDIR)/$(mpc_ver)/Makefile	\

   339 		: $(MPC_CFG)

   340 		$(info Configuring $@. Log in $(@D)/log.config)

   341 		@mkdir -p $(@D)

   342 		(						\

   343 			cd $(@D) ;				\

   344 			$(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)"	\

   345 				$(MPC_CFG) 			\

   346 				$(CONFIG) 			\

   347 				--program-prefix=$(TARGET)-	\

   348 				--enable-shared=no		\

   349 				--with-mpfr=$(PREFIX)	\

   350 				--with-gmp=$(PREFIX)	\

   351 		) > $(@D)/log.config 2>&1

   352 		@echo 'done'

   354 # Only valid if glibc target -> linux

   355 # proper destructor handling for c++

   356 ifneq (,$(findstring linux,$(TARGET)))

   357 $(BUILDDIR)/$(gcc_ver)/Makefile : CONFIG += --enable-__cxa_atexit

   358 endif

   360 # Want:

   361 # 	c,c++

   362 # 	shared libs

   363 #	multilib (-m32/-m64 on x64)

   364 # 	skip native language.

   365 #	and link and assemble with the binutils we created

   366 #	earlier, so --with-gnu*

   367 $(BUILDDIR)/$(gcc_ver)/Makefile	\

   368 		: $(GCC_CFG)

   369 		$(info Configuring $@. Log in $(@D)/log.config)

   370 		mkdir -p $(@D)

   371 		(						\

   372 			cd $(@D) ;				\

   373 			$(PATHPRE) $(ENVS) $(GCC_CFG) $(EXTRA_CFLAGS) \

   374 				$(CONFIG) 			\

   375 				--with-sysroot=$(SYSROOT)	\

   376 				--enable-languages=c,c++ 	\

   377 				--enable-shared			\

   378 				--enable-multilib		\

   379 				--disable-nls			\

   380 				--with-gnu-as 			\

   381 				--with-gnu-ld			\

   382 				--with-mpfr=$(PREFIX)		\

   383 				--with-gmp=$(PREFIX)		\

   384 				--with-mpc=$(PREFIX)		\

   385 		) > $(@D)/log.config 2>&1

   386 		@echo 'done'

   388 # need binutils for gcc

   389 $(gcc)		: $(binutils)

   391 # as of 4.3 or so need these for doing config

   392 $(BUILDDIR)/$(gcc_ver)/Makefile : $(gmp) $(mpfr) $(mpc)

   393 $(mpfr)		: $(gmp)

   394 $(mpc)		: $(gmp) $(mpfr)

   396 ##########################################################################################

   397 # very straightforward. just build a ccache. it is only for host.

   398 $(BUILDDIR)/$(ccache_ver)/Makefile	\

   399 		: $(CCACHE_CFG)

   400 		$(info Configuring $@. Log in $(@D)/log.config)

   401 		@mkdir -p $(@D)

   402 		@(						\

   403 			cd $(@D) ;				\

   404 			$(PATHPRE) $(ENVS) $(CCACHE_CFG)	\

   405 				$(CONFIG) 			\

   406 		) > $(@D)/log.config 2>&1

   407 		@echo 'done'

   409 gccpatch	= $(TARGETDIR)/gcc-patched

   411 ##########################################################################################

   412 # For some reason cpp is not created as a target-compiler

   413 ifeq ($(HOST),$(TARGET))

   414 $(gccpatch)	: $(gcc) link_libs

   415 		@echo -n 'Creating compiler symlinks...'

   416 		@for f in cpp; do 				\

   417 			if [ ! -e $(PREFIX)/bin/$(TARGET)-$$f ];\

   418 			then					\

   419 			cd $(PREFIX)/bin && 			\

   420 				ln -s $$f $(TARGET)-$$f ;	\

   421 			fi					\

   422 		done

   423 		@touch $@

   424 		@echo 'done'

   426 ##########################################################################################

   427 # Ugly at best. Seems that when we compile host->host compiler, that are NOT

   428 # the BUILD compiler, the result will not try searching for libs in package root.

   429 # "Solve" this by create links from the target libdirs to where they are.

   430 link_libs:

   431 		@echo -n 'Creating library symlinks...'

   432 		@$(foreach l,$(LIBDIRS),							\

   433 		for f in `cd $(PREFIX)/$(l) && ls`; do 						\

   434 			if [ ! -e $(TARGETDIR)/$(l)/$$f ]; then					\

   435 				mkdir -p $(TARGETDIR)/$(l) &&					\

   436 				cd $(TARGETDIR)/$(l)/ && 					\

   437 				ln -s $(if $(findstring /,$(l)),../,)../../$(l)/$$f $$f;	\

   438 			fi									\

   439 		done;)

   440 		@echo 'done'

   441 else

   442 $(gccpatch)	:

   443 		@echo 'done'

   444 endif

   446 ##########################################################################################

   447 # Build in two steps.

   448 # make <default>

   449 # make install.

   450 # Use path to our build hosts cross tools

   451 # Always need to build cross tools for build host self.

   452 $(TARGETDIR)/%.done : $(BUILDDIR)/%/Makefile

   453 		$(info Building $(basename $@). Log in $(<D)/log.build)

   454 		$(PATHPRE) $(ENVS) $(MAKE) $(BUILDPAR) -f $< -C $(<D) $(MAKECMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.build 2>&1

   455 		@echo -n 'installing...'

   456 		$(PATHPRE) $(MAKE) $(INSTALLPAR) -f $< -C $(<D) $(INSTALLCMD) $(MAKECMD.$(notdir $@))  > $(<D)/log.install 2>&1

   457 		@touch $@

   458 		@echo 'done'

   460 ##########################################################################################

   462 bfdlib		: $(bfdlib)

   463 binutils	: $(binutils)

   464 rpms		: $(rpms)

   465 libs		: $(libs)

   466 sysroot		: rpms libs

   467 gcc		: sysroot $(gcc) $(gccpatch)

   468 all		: binutils gcc bfdlib

   470 # this is only built for host. so separate.

   471 ccache		: $(ccache)

   473 .PHONY		: gcc all binutils bfdlib link_libs rpms libs sysroot

Mercurial > jdk8-mips64-public / file revision

common/makefiles/devkit/Tools.gmk@c0fa87863427

common/makefiles/devkit/Tools.gmk