jdk8-mips64-public/corba: make/common/Defs.gmk@55540e827aef

1 #

     2 # Copyright 1995-2007 Sun Microsystems, Inc.  All Rights Reserved.

     3 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

4 #

     5 # This code is free software; you can redistribute it and/or modify it

     6 # under the terms of the GNU General Public License version 2 only, as

     7 # published by the Free Software Foundation.  Sun designates this

     8 # particular file as subject to the "Classpath" exception as provided

     9 # by Sun in the LICENSE file that accompanied this code.

    10 #

    11 # This code is distributed in the hope that it will be useful, but WITHOUT

    12 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    13 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

    14 # version 2 for more details (a copy is included in the LICENSE file that

    15 # accompanied this code).

    16 #

    17 # You should have received a copy of the GNU General Public License version

    18 # 2 along with this work; if not, write to the Free Software Foundation,

    19 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

    20 #

    21 # Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,

    22 # CA 95054 USA or visit www.sun.com if you need additional information or

    23 # have any questions.

    24 #

    26 #

    27 # Common variables used by all the Java makefiles.  This file should

    28 # not contain rules.

    29 #

    31 #

    32 # On Solaris, the 'make' utility from Sun will not work with these makefiles.

    33 #    This little rule is only understood by Sun's make, and is harmless

    34 #    when seen by the GNU make tool. If using Sun's make, this causes the

    35 #    make command to fail.

    36 #

    37 SUN_MAKE_TEST:sh = echo "ERROR: PLEASE USE GNU VERSION OF MAKE"; exit 33

    39 include $(BUILDDIR)/common/shared/Platform.gmk

    41 TOPDIR=$(BUILDDIR)/..

    43 include $(TOPDIR)/make/common/CancelImplicits.gmk

    45 # Historically PLATFORM_SRC used to be src/$(PLATFORM), but we switched it to

    46 # src/solaris so if you want to build on Linux you didn't need a src/linux

    47 # directory.  In an ideal world it would be called src/genunix but we are not

    48 # there yet.

    49 #

    50 ifndef SHARE_SRC

    51   SHARE_SRC    = $(TOPDIR)/src/share

    52 endif

    54 _OUTPUTDIR=$(TOPDIR)/build/$(PLATFORM)-$(ARCH)

    56 #

    57 # Get platform definitions

    58 #

    60 include $(TOPDIR)/make/common/Defs-$(PLATFORM).gmk

    62 #

    63 # Localizations for the different parts of the product beyond English

    64 #

    66 JRE_LOCALES   = de es fr it ja ko sv zh_CN zh_TW zh_HK

    67 PLUGIN_LOCALES = de es fr it ja ko sv zh_CN zh_TW zh_HK

    68 JDK_LOCALES  = ja zh_CN

    70 #

    71 # A list of locales we support but don't have resource files.

    72 # This is defined to optimize the search of resource bundles.

    73 #

    74 JRE_NONEXIST_LOCALES = en en_US de_DE es_ES fr_FR it_IT ja_JP ko_KR sv_SE zh

    76 #

    77 # All libraries except libjava and libjvm itself link against libjvm and

    78 # libjava, the latter for its exported common utilities.  libjava only links

    79 # against libjvm.  Programs' makefiles take their own responsibility for

    80 # adding other libs.

    81 #

    82 ifdef PACKAGE

    83 # put JAVALIB first, but do not lose any platform specific values....

    84   LDLIBS_COMMON = $(JAVALIB)

    85 endif # PACKAGE

    87 #

    88 # Libraries that must appear ahead of libc.so on the link command line

    89 #

    90 ifdef PROGRAM

    92   ifeq ($(PLATFORM), solaris)

    93     LDLIBS_COMMON = -lthread -ldl

    94   endif

    96   ifeq ($(PLATFORM), linux)

    97     LDLIBS_COMMON = -ldl

    98   endif

   100 endif # PROGRAM

   102 LDLIBS_COMMON += $(EXTRA_LIBS)

   104 #

   105 # Default is to build, not import native binaries

   106 #

   107 ifndef IMPORT_NATIVE_BINARIES

   108   IMPORT_NATIVE_BINARIES=false

   109 endif

   110 # If importing libraries in, no incremental builds

   111 ifeq ($(IMPORT_NATIVE_BINARIES),true)

   112  INCREMENTAL_BUILD=false

   113 endif

   115 # for generated libraries

   116 LIBDIR              = $(OUTPUTDIR)/lib

   117 ABS_LIBDIR          = $(ABS_OUTPUTDIR)/lib

   118 # Optional place to save the windows .lib files

   119 LIBFILES_DIR        = $(OUTPUTDIR)/libfiles

   120 # for ext jre files

   121 EXTDIR              = $(LIBDIR)/ext

   122 # for generated include files

   123 INCLUDEDIR          = $(OUTPUTDIR)/include

   124 # for generated class files

   125 CLASSBINDIR         = $(OUTPUTDIR)/classes

   126 DEMOCLASSDIR        = $(OUTPUTDIR)/democlasses

   127 # for generated tool class files

   128 BUILDTOOLCLASSDIR   = $(OUTPUTDIR)/btclasses

   129 # for build tool jar files

   130 BUILDTOOLJARDIR     = $(OUTPUTDIR)/btjars

   131 ABS_BUILDTOOLJARDIR = $(ABS_OUTPUTDIR)/btjars

   132 # for generated java source files

   133 GENSRCDIR           = $(OUTPUTDIR)/gensrc

   134 # for generated C source files (not javah)

   135 GENNATIVESRCDIR     = $(OUTPUTDIR)/gennativesrc

   136 # for imported source files

   137 IMPORTSRCDIR        = $(OUTPUTDIR)/impsrc

   138 # for imported documents

   139 IMPORTDOCDIR        = $(OUTPUTDIR)/impdoc

   140 # for generated demo

   141 DEMODIR             = $(OUTPUTDIR)/demo

   142 # for sample code

   143 SAMPLEDIR           = $(OUTPUTDIR)/sample

   144 # for generated documentation

   145 DOCSDIR             = $(OUTPUTDIR)/docs$(DOCSDIRSUFFIX)

   146 DOCSDIRSUFFIX       =

   148 # An attempt is made to generate unique enough directories for the

   149 # generated files to not have name collisisons. Most build units

   150 # defines PRODUCT (except Release.gmk), but then they may or may

   151 # not define PACKAGE, THREADIR (only HPI uses this), PROGRAM, and

   152 # LIBRARY. This code chunk attempts to generate a unique

   153 # OBJDIR/CLASSHDRDIR for each build unit based on which of those

   154 # values are set within each build unit.

   156 UNIQUE_LOCATION_STRING = tmp

   158 ifneq ($(PRODUCT),)

   159   UNIQUE_LOCATION_STRING += /$(PRODUCT)

   160 endif

   162 ifneq ($(PACKAGE),)

   163   UNIQUE_LOCATION_STRING += /$(PACKAGE)

   164 endif

   166 ifneq ($(PROGRAM),)

   167   UNIQUE_LOCATION_STRING += /$(PROGRAM)

   168 endif

   170 ifneq ($(LIBRARY),)

   171   ifneq ($(LIBRARY_OUTPUT),)

   172     UNIQUE_LOCATION_STRING += /$(LIBRARY_OUTPUT)

   173   else

   174     UNIQUE_LOCATION_STRING += /$(LIBRARY)

   175   endif

   176 endif

   178 ifneq ($(THREADDIR),)

   179   UNIQUE_LOCATION_STRING += /$(THREADDIR)

   180 endif

   182 # the use of += above makes a space separated list which we need to

   183 # remove for filespecs.

   184 #

   185 NULLSTRING :=

   186 ONESPACE := $(NULLSTRING) # space before this comment is required.

   187 UNIQUE_PATH = $(subst $(ONESPACE),,$(UNIQUE_LOCATION_STRING))

   189 # TEMPDIR is a unique general purpose directory

   190 # need to use 'override' because GNU Make on Linux exports the wrong

   191 # value.

   192 override TEMPDIR      = $(OUTPUTDIR)/$(UNIQUE_PATH)

   193 override ABS_TEMPDIR  = $(ABS_OUTPUTDIR)/$(UNIQUE_PATH)

   195 # This must be created right away for pattern rules in Sanity.gmk to work.

   196 dummy1:=$(shell $(MKDIR) -p $(TEMPDIR))

   197 dummy2:=$(shell $(MKDIR) -p $(TEMP_DISK))

   199 # OBJDIRNAME is the name of the directory where the object code is to

   200 #   be placed. It's name depends on whether the data model architecture

   201 #   is 32-bit or not.

   202 ifneq ($(ARCH_DATA_MODEL), 32)

   203   OBJDIRNAME  = obj$(ARCH_DATA_MODEL)$(OBJDIRNAME_SUFFIX)

   204 else

   205   OBJDIRNAME  = obj$(OBJDIRNAME_SUFFIX)

   206 endif

   207 OBJDIR      = $(TEMPDIR)/$(OBJDIRNAME)

   209 # CLASSHDRDIR is where the generated C Class Header files go.

   210 CLASSHDRDIR = $(TEMPDIR)/CClassHeaders

   212 #

   213 # CLASSDESTDIR can be used to specify the directory where generated classes

   214 # are to be placed. The default is CLASSBINDIR.

   215 #

   216 ifndef CLASSDESTDIR

   217 CLASSDESTDIR = $(CLASSBINDIR)

   218 endif

   220 INCLUDES = -I. -I$(CLASSHDRDIR) \

   221 	$(patsubst %,-I%,$(subst $(CLASSPATH_SEPARATOR), ,$(VPATH.h))) $(OTHER_INCLUDES)

   222 OTHER_CPPFLAGS = $(INCLUDES)

   225 #

   226 # vpaths.  These are the default locations searched for source files.

   227 # GNUmakefiles of individual areas often override the default settings.

   228 # There are no longer default vpath entries for C and assembler files

   229 # so we can ensure that libraries don't get their hands on JVM files.

   230 #

   231 # We define an intermediate variable for Java files because

   232 # we use its value later to help define $SOURCEPATH

   234 VPATH0.java = $(GENSRCDIR)$(CLASSPATH_SEPARATOR)$(PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/classes

   235 VPATH.java = $(VPATH0.java)

   236 vpath %.java $(VPATH.java)

   237 vpath %.class $(CLASSBINDIR)

   238 vpath %.$(OBJECT_SUFFIX) $(OBJDIR)

   240 #

   241 # VPATH.h is used elsewhere to generate include flags.  By default,

   242 # anyone has access to the include files that the JVM area exports,

   243 # namely jni.h, jvm.h, and jni_utils.h, plus their platform-specific

   244 # relatives.

   245 #

   246 ifeq ($(PLATFORM), windows)

   247   VPATH.h = $(BOOTDIR)/include;$(BOOTDIR)/include/$(PLATFORM_INCLUDE_NAME)

   248 else

   249   VPATH.h = $(PLATFORM_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/javavm/include$(CLASSPATH_SEPARATOR)$(PLATFORM_SRC)/javavm/include

   250 endif

   251 vpath %.h   $(VPATH.h)

   253 #

   254 # Used in two ways: helps link against libjava.so. Also if overridden

   255 # determines where your shared library is installed.

   256 #

   257 ifndef LIB_LOCATION

   258   LIB_LOCATION    =  $(LIBDIR)/$(LIBARCH)

   259 endif

   261 #

   262 # Java header and stub variables

   263 #

   264 CLASSHDRS     = $(patsubst %,$(CLASSHDRDIR)/%.h,$(subst .,_,$(CLASSES.export)))

   265 CLASSSTUBOBJS = classstubs.$(OBJECT_SUFFIX)

   266 STUBPREAMBLE  = $(INCLUDEDIR)/StubPreamble.h

   268 #

   269 # Classpath seen by javac (different from the one seen by the VM

   270 # running javac), and useful variables.

   271 #

   272 SOURCEPATH	= $(VPATH.java)

   273 PKG		= $(shell $(EXPR) $(PACKAGE) : '\([a-z]*\)')

   274 PKGDIR		= $(subst .,/,$(PACKAGE))

   276 #

   277 # The java/javac/jdk variables (JAVAC_CMD, JAVA_CMD, etc.)

   278 #

   279 include $(BUILDDIR)/common/shared/Defs-java.gmk

   281 #

   282 # Set opt level to ALT_OPT if set otherwise _OPT

   283 #

   284 POPT = $(_OPT$(ALT_OPT))$(ALT_OPT)

   286 #

   287 # Convenient macros

   288 #

   290 # Prepare $@ target, remove old one and making sure directory exists

   291 define prep-target

   292 $(MKDIR) -p $(@D)

   293 $(RM) $@

   294 endef

   296 # Simple install of $< file to $@

   297 define install-file

   298 $(prep-target)

   299 $(CP) $< $@

   300 endef

   302 # Cleanup rule for after debug java run (hotspot.log file is left around)

   303 #   (This could be an old leftover file in a read-only area, use the @- prefix)

   304 HOTSPOT_LOG_NAME = hotspot.log

   305 define java-vm-cleanup

   306 if [ -w $(HOTSPOT_LOG_NAME) ] ; then $(RM) $(HOTSPOT_LOG_NAME); fi

   307 endef

   309 # Default make settings for processing SUBDIRS with clobber or clean names

   310 SUBDIRS_MAKEFLAGS-clobber = INCREMENTAL_BUILD=false

   311 SUBDIRS_MAKEFLAGS-clean   = INCREMENTAL_BUILD=false

   313 # Current directory

   314 CURRENT_DIRECTORY := $(shell $(PWD))

   316 # If no timing wanted, we need to define these as empty

   317 ifdef NO_TIMING

   319 TIMING_ID:=NA

   321 define TIMING_start

   322 t=0:0:0:0

   323 endef

   325 define TIMING_end

   326 time_used=0

   327 endef

   329 else # NO_TIMING

   331 # Default timing id

   332 TIMING_ID:=$(shell $(BASENAME) $(CURRENT_DIRECTORY))

   334 # Timing start (must be used in same shell, e.g. same command line)

   335 #    Defines the shell variable $1 to have the start time.

   336 define TIMING_start

   337 $1=`$(DATE) +%j:%H:%M:%S`

   338 endef

   340 # Timing end (must be used in same shell, e.g. same command line)

   341 #    Expects shell variable $1 to have been defined as the start time.

   342 #    Expects shell variable $2 to have timing id string

   343 #    Sets total_seconds shell variable as the total seconds used.

   344 #    Sets time_used shell variable to contain format "%dh%dm%ds"

   345 define TIMING_end

   346 begTime="$${$1}"; \

   347 timing_id="$${$2}"; \

   348 endTime=`$(DATE) +%j:%H:%M:%S`; \

   349 d1=`$(ECHO) $${begTime} | $(CUT) -d':' -f1 | $(SED) -e 's@^0*@@'`; \

   350 if [ "$${d1}" = "" ] ; then d1=0; fi; \

   351 h1=`$(ECHO) $${begTime} | $(CUT) -d':' -f2 | $(SED) -e 's@^0*@@'`; \

   352 if [ "$${h1}" = "" ] ; then h1=0; fi; \

   353 m1=`$(ECHO) $${begTime} | $(CUT) -d':' -f3 | $(SED) -e 's@^0*@@'`; \

   354 if [ "$${m1}" = "" ] ; then m1=0; fi; \

   355 s1=`$(ECHO) $${begTime} | $(CUT) -d':' -f4 | $(SED) -e 's@^0*@@'`; \

   356 if [ "$${s1}" = "" ] ; then s1=0; fi; \

   357 d2=`$(ECHO) $${endTime} | $(CUT) -d':' -f1 | $(SED) -e 's@^0*@@'`; \

   358 if [ "$${d2}" = "" ] ; then d2=0; fi; \

   359 h2=`$(ECHO) $${endTime} | $(CUT) -d':' -f2 | $(SED) -e 's@^0*@@'`; \

   360 if [ "$${h2}" = "" ] ; then h2=0; fi; \

   361 m2=`$(ECHO) $${endTime} | $(CUT) -d':' -f3 | $(SED) -e 's@^0*@@'`; \

   362 if [ "$${m2}" = "" ] ; then m2=0; fi; \

   363 s2=`$(ECHO) $${endTime} | $(CUT) -d':' -f4 | $(SED) -e 's@^0*@@'`; \

   364 if [ "$${s2}" = "" ] ; then s2=0; fi; \

   365 t1_secs=`$(EXPR) $${d1} '*' 60 '*' 60 '*' 24 '+' $${h1} '*' 60 '*' 60 \

   366 		 '+' $${m1} '*' 60 '+' $${s1}`; \

   367 t2_secs=`$(EXPR) $${d2} '*' 60 '*' 60 '*' 24 '+' $${h2} '*' 60 '*' 60 \

   368 		 '+' $${m2} '*' 60 '+' $${s2}`; \

   369 total_seconds=`$(EXPR) $${t2_secs} '-' $${t1_secs}`; \

   370 if [ "$${total_seconds}" -lt 0 ] ; then total_seconds=0; fi; \

   371 t_hour=`$(EXPR) $${total_seconds} '/' '(' 60 '*' 60 ')'`h; \

   372 t_min=`$(EXPR) '(' $${total_seconds} '%' '(' 60 '*' 60 ')' ')' '/' 60`m; \

   373 t_sec=`$(EXPR) $${total_seconds} '%' 60`s; \

   374 time_used=$${t_sec}; \

   375 if [ "$${t_hour}" != "0h" ] ; then \

   376 time_used=$${t_hour}$${t_min}$${t_sec}; \

   377 elif [ "$${t_min}" != "0m" ] ; then \

   378 time_used=$${t_min}$${t_sec}; \

   379 else \

   380 time_used=$${t_sec}; \

   381 fi; \

   382 $(PRINTF) "  Timing: %05d seconds or %s for %s\n" \

   383     $${total_seconds} $${time_used} $${timing_id}

   384 endef

   386 endif # NO_TIMING

   388 # Given a SUBDIRS list, cd into them and make them

   389 #   SUBDIRS_MAKEFLAGS      Make settings for a subdir make

   390 #   SUBDIRS_MAKEFLAGS-$@   Make settings specific to this target

   391 define SUBDIRS-loop

   392 @$(ECHO) "Begin Processing SUBDIRS: $(SUBDIRS)"

   393 @for i in DUMMY $(SUBDIRS) ; do \

   394   if [ "$$i" != "DUMMY" ] ; then \

   395     $(ECHO) ">>>Recursively making "$$i" "$@" @ `$(DATE)` ..."; \

   396     timing_id="$(TIMING_ID)-`$(BASENAME) $${i}`"; \

   397     $(call TIMING_start,startTime); \

   398     curDir=$(CURRENT_DIRECTORY); \

   399     $(CD) $$i; $(MAKE) $@ TIMING_ID=$${timing_id} \

   400 			  $(SUBDIRS_MAKEFLAGS) \

   401 			  $(SUBDIRS_MAKEFLAGS-$@) \

   402 			  FULL_VERSION=$(FULL_VERSION) \

   403 			  RELEASE=$(RELEASE) || exit 1; \

   404 	       $(CD) $${curDir}; \

   405     $(call TIMING_end,startTime,timing_id); \

   406     $(ECHO) "<<<Finished Recursively making "$$i" "$@" @ `$(DATE)`." ; \

   407   fi ; \

   408 done

   409 @$(ECHO) "Done Processing SUBDIRS: $(SUBDIRS)"

   410 endef

   412 # Given a OTHERSUBDIRS list, cd into them and make them (extra loop define)

   413 #   OTHERSUBDIRS_MAKEFLAGS      Make settings for a subdir make

   414 define OTHERSUBDIRS-loop

   415 @$(ECHO) "Begin Processing OTHERSUBDIRS: $(OTHERSUBDIRS)"

   416 @for i in DUMMY $(OTHERSUBDIRS) ; do \

   417   if [ "$$i" != "DUMMY" ] ; then \

   418     $(ECHO) ">>>Recursively making "$$i" "$@" @ `$(DATE)` ..."; \

   419     timing_id="$(TIMING_ID)-`$(BASENAME) $${i}`"; \

   420     $(call TIMING_start,startTime); \

   421     curDir=$(CURRENT_DIRECTORY); \

   422     $(CD) $$i; $(MAKE) $@ TIMING_ID=$${timing_id} \

   423 		          $(OTHERSUBDIRS_MAKEFLAGS) \

   424 			  FULL_VERSION=$(FULL_VERSION) \

   425 			  RELEASE=$(RELEASE) || exit 1; \

   426 	       $(CD) $${curDir}; \

   427     $(call TIMING_end,startTime,timing_id); \

   428     $(ECHO) "<<<Finished Recursively making "$$i" "$@" @ `$(DATE)`." ; \

   429   fi ; \

   430 done

   431 @$(ECHO) "Done Processing OTHERSUBDIRS: $(OTHERSUBDIRS)"

   432 endef

   434 #

   435 # Create BYFILE OPT and DBG settings, if CFLAGS_OPT/foobar.o is set then it is

   436 #    used for this file, otherwise the default settings are used.

   437 #

   438 CFLAGS_$(VARIANT)/BYFILE    = $(CFLAGS_$(VARIANT)/$(@F)) \

   439                               $(CFLAGS_$(VARIANT)$(CFLAGS_$(VARIANT)/$(@F)))

   440 CXXFLAGS_$(VARIANT)/BYFILE  = $(CXXFLAGS_$(VARIANT)/$(@F)) \

   441                               $(CXXFLAGS_$(VARIANT)$(CXXFLAGS_$(VARIANT)/$(@F)))

   443 #

   444 # Tool flags

   445 #

   446 ASFLAGS         = $(ASFLAGS_$(VARIANT)) $(ASFLAGS_COMMON) $(OTHER_ASFLAGS)

   447 CFLAGS          = $(CFLAGS_$(VARIANT)/BYFILE)   $(CFLAGS_COMMON) $(OTHER_CFLAGS)

   448 CXXFLAGS        = $(CXXFLAGS_$(VARIANT)/BYFILE) $(CXXFLAGS_COMMON) $(OTHER_CXXFLAGS)

   449 CPPFLAGS        = $(CPPFLAGS_$(VARIANT)) $(CPPFLAGS_COMMON) $(OTHER_CPPFLAGS) \

   450 		  $(DEFINES) $(OPTIONS:%=-D%)

   451 LDFLAGS         = $(LDFLAGS_$(VARIANT)) $(LDFLAGS_COMMON) $(OTHER_LDFLAGS)

   452 LDLIBS          = $(OTHER_LDLIBS) $(LDLIBS_$(VARIANT)) $(LDLIBS_COMMON)

   453 LINTFLAGS       = $(LINTFLAGS_$(VARIANT)) $(LINTFLAGS_COMMON) \

   454 		  $(OTHER_LINTFLAGS)

   456 # this should be moved into Defs-<platform>.gmk.....

   457 ifeq ($(PLATFORM), windows)

   458   VERSION_DEFINES = -DRELEASE="\"$(RELEASE)\""

   459 else

   460   VERSION_DEFINES = -DRELEASE='"$(RELEASE)"'

   461 endif

   463 # Note: As a rule, GNU Make rules should not appear in any of the

   464 # Defs*.gmk files. These were added for Kestrel-Solaris and do address

   465 # a TeamWare bug. They should be moved elsewhere for Merlin.

   466 #

   467 #  Override gnumake built-in rules which do sccs get operations badly.

   468 #  (They put the checked out code in the current directory, not in the

   469 #  directory of the original file.)

   470 # Since this is a symptom of a teamware failure, complain and die on the spot.

   472 # This message immediately goes to stdout and the build terminates.

   473 define SCCS-trouble

   474 $(error  \

   475 "ERROR: File $@ referenced while building in $(CURRENT_DIRECTORY) \

   476  is out of date with respect to its SCCS file $<. \

   477  This can happen from an unresolved Teamware conflict, a file movement, or \

   478  a failure in which SCCS files are updated but the 'sccs get' was not done. \

   479  You should double check for other out of date files in your workspace. \

   480  Or run: cd $(TOPDIR) && $(MAKE) sccs_get")

   481 endef

   483 %:: s.%

   484 	@$(SCCS-trouble)

   485 %:: SCCS/s.%

   486 	@$(SCCS-trouble)

   487 	@$(ECHO) "         is out of date with respect to its SCCS file." >> $(WARNING_FILE)

   488 	@$(ECHO) "         This file may be from an unresolved Teamware conflict." >> $(WARNING_FILE)

   489 	@$(ECHO) "         This is also a symptom of a Teamware bringover/putback failure" >> $(WARNING_FILE)

   490 	@$(ECHO) "         in which SCCS files are updated but not checked out." >> $(WARNING_FILE)

   491 	@$(ECHO) "         Check for other out of date files in your workspace." >> $(WARNING_FILE)

   492 	@$(ECHO) "" >> $(WARNING_FILE)

   493 	@#exit 666

   495 ifdef INSANE

   496   export INSANE

   497 endif

   499 ifdef ALT_COPYRIGHT_YEAR

   500   COPYRIGHT_YEAR = $(ALT_COPYRIGHT_YEAR)

   501 else

   502   COPYRIGHT_YEAR = $(shell $(DATE) '+%Y')

   503 endif

   505 # Install of imported file (JDK_IMPORT_PATH, or some other external location)

   506 define install-import-file

   507 @$(ECHO) "ASSEMBLY_IMPORT: $@"

   508 $(install-file)

   509 endef

   511 .PHONY: all build clean clobber

Mercurial > jdk8-mips64-public > corba / file revision

make/common/Defs.gmk@55540e827aef

make/common/Defs.gmk